This work mapped the research chronology and conceptual trends on conservation agriculture-soil health-sustainable development goals nexus by analyzing data from related literature. This is the first-time different bibliometric methods such as VOSviewer, Flourish, as well as Bibliometrix and Biblioshiny models in RStudio were simultaneously used to investigate the research impacts and/or interactions between conservation agriculture (CA), soil health and sustainable development at global scale. On 20th February 2024, a search was launched on the web of science core collection using related search terms to extract relevant data. After the screening and elimination, the search produced 835 papers which were used in the bibliometric analysis. The revealed that USA (31%), India (27%), Australia (7%), England (6%), China (6%), Canada (5%), and other countries had below 5% of the published documents. Many of the papers covered zero hunger (38%), climate action (30%), life on land (26%), while other SDGs had relatively low coverage. The study found the adoption of no till, cover cropping, and organic amendments by the authors as the common CA practices. The hybrid bibliometric approach provided a clear roadmap in understanding the global research trajectory on CA-soil health and SDGs nexus, as well as the roles of countries, authors, institutions, publishing journals. This knowledge could support in championing future debates on CA potential for effective discussion and policies, especially in the developing countries where there have been low publications.

The production of photovoltaic modules is increasing to reduce greenhouse gas emissions. However, this results in a significant amount of waste at the end of their lifespan. Therefore, recycling these solar panels is important for environmental and economic reasons. However, collecting and separating Crystalline silicon, Cadmium Telluride, and Copper indium gallium selenide panels can be challenging, especially in underdeveloped countries. The innovation of this work is to develop a process to recycle all solar panel waste. The dissolution of all metals is studied through the leaching process as the main step of the flowchart. In the first step of leaching, silver can be recovered 98% by 0.5 nitric acid. Then, the second and third step involves the use of glycine for base metals dissolution, followed by the leaching of valuable metals with hydrochloric acid. The effect of parameters such as initial pH, acid concentration, solid/liquid ratio, and Hydrogen peroxide concentration are studied. The results show that Cu, Pb, Sn, Zn, Cd, In, Ga, and Se can be recovered until about 100% under optimal conditions. The optimal conditions for the dissolution of Cu, Zn, and Cd were the glycine concentration of 0.5 M, Temperature of 25 ˚C, the solid/liquid ratio of 10 gr/l, and 1% of Hydrogen peroxide. The optimized glycine concentration for the leaching of lead and tin was 1.5M. Indium and gallium were recovered to 100% by the use of 5M Hydrochloric acid, S/L=10gr/l, and T=45 ˚C. Separation of selenium and tellurium occurred by 0.5 M HCl at a temperature of 60 ˚C. Additionally, for the first time, a general outlook for the recycling of various end-of-life solar panels is suggested.

Hydroxytyrosol (HT) is a nutraceutic compound, mainly found in the fruit, leaves and waste from the olive oil industry, that shows one of the highest antioxidant activities among molecules of natural origin. To harness this bioactivity in cosmetics, pharmaceuticals, and the food industry, it is essential to modify the hydrophilicity of HT to enhance its compatibility with lipid-based mixtures. This chemical modification must be done with high selectivity to avoid compromising its radical scavenging activity. This work presents a highly efficient and selective approach to perform the biocatalytic esterification of free fatty acids (FFAs) of different alkyl chain length with HT in a reaction medium based on the SLIL [C12mim][NTf2]. By using a 1:2 (mol/mol) HT:FFA mixture of substrates, the HT monoester derivative was obtained up to 77% yield after 2 h at 80 oC. The adjusted molar ratio of substrates, combined with the ability to recover the SLIL for further reuse, significantly reduces waste accumulation compared to other reported strategies and results in a more sustainable approach as demonstrated by different green metrics. Furthermore, it was demonstrated by a DPPH test how the HT monoester products retain the same antioxidant activity as free HT, being superior to vitamin C.

The technological revolution has contributed significantly to environmental and social issues worldwide. In higher education institutions, there is a theoretical gap in systematic reviews on the integration of digital transformation into sustainability. This systematic review of the literature aims to address this gap by exploring how digital transformation improves sustainability in higher education institutions, identifying emerging trends and best practices for effective strategies. Using the PRISMA guidelines, the study conducted a comprehensive search in the Scopus database, producing 1,686 publications from 2019 to 2024. The findings reveal a widespread awareness of digital technology integration but highlight a lack of consensus on sustainable integration strategies. Furthermore, the results demonstrate that educational achievements can be enhanced through tools and methodologies that align with the Sustainable Development Goals of the United Nations. The analysis identifies three primary domains: sustainability capabilities enabled by digital transformation, innovative sustainable approaches, and the conceptualisation of sustainability in higher education. The incorporation of digital tools, such as AI chatbots, institutions foster innovation and achieves sustainability objectives, thus transforming teaching and learning approaches. This review contributes significantly to understanding the role of digital transformation in promoting a sustainable and digitally enabled future in higher education.

Our decisions today are part of an economic thinking which aims to fix problems and increase the efficiency of capital markets. Our economy is still largely approached as a system which is unre-lated to our environment or social returns like community well-being, social cohesion, equitable distribution of resources, etc. To fully incorporate sustainability into cost-benefit analysis, busi-nesses need to change their financial approach, showcasing how long-term thinking impacts prof-its. Money's value is not static and evolves with time and technology. We propose to introduce a variation of cost/benefit and present value calculations. Precise calculations reveal the benefits of long-term strategies over short-term profit focus. As financial systems evolve and technology advances, the accurate calculation of money's time value will continue to play a crucial role in shaping economic landscapes and guiding financial choices. In this article, we demonstrate that updated calculations could be a key enabler to visualize the benefits of long-term thinking or “patient finance” as compared to a short-term focus on profit. We introduce the concept and calculation of a Present Future Value (PFV).

Startups often face uncertainty and the potential Valley of Death. To address these challenges, Sustainable Development Goals (SDGs) can serve as a starting point to identify business opportunities in markets driven by SDG-related issues, which is, in this case, using Virtual Reality (VR) technology as a “painkiller.” This study aims to explore VR use cases and their implications for startup business models and discover a problem-solution fit—defined as the degree to which VR applications effectively address actual problems as “killer applications.” The study employs a customized customer discovery technique, an essential process in the Customer Development methodology. By exploring VR's applicability in various domains such as entertainment, training, education, and tourism, this study unveils compelling use cases that align with SDG aspects, thus validating the hypothesis on startups' potential to harness VR for SDG contributions. Furthermore, the study produces VR business model designs based on solutions to SDG-related problems. Thus, startups can function effectively as “painkillers,” offering solutions that are not only desired but urgently needed (problem-solution fit). The implications of these findings extend globally, underlining VR's role in addressing SDG issues and offering practical insights for startup business model development that are applicable to broader technology adoptions.

The adoption of Industry 4.0 technology is essential for achieving energy efficiency, a critical aspect of Sustainable Development Goal (SDG) no. 12 aimed at addressing climate change. Understanding the impact of Sustainable Attitudes, Digital Trust, and Uncertainty Avoidance is crucial in the decision-making process regarding the implementation of Industry 4.0 technology. The slow adoption of Industry 4.0 technology is attributed to non-technological factors or people, while the need to achieve energy efficiency targets necessitates examining the influence of Sustainable Attitudes and Digital Trust as supporting variables, along with Uncertainty Avoidance, on technology adoption. The study employed a quantitative explanatory research approach to investigate the relationships and impacts of variables. It centered on employees of Schneider Electric Indonesia, a global Industry 4.0 technology provider, with a sample of 189 employees selected through random sampling, incorporating a 5% margin error from Slovin formula. The analysis involved the use of Structural Equation Modeling (SEM) with AMOS version 26. Industry 4.0 technology is essential for fostering innovation and business expansion, leading to a sustainable environment by offering principles, guidance, and energy-efficient technologies for companies. The involvement of Sustainable Attitude, moderated by Uncertainty Avoidance, is vital in reaching energy efficiency goals through Industry 4.0 implementation.

This study presents a systematic review of the impact of Industry 4.0, digitalization, and information systems on the procurement function with a focus on the Portuguese reality. Despite global trends emphasizing digital transformation and innovation, the procurement practices in Portugal seem to lag. The adoption of cutting-edge technologies and the comprehensive integration of digital solutions within the procurement and supply chain management sector are yet to materialize fully in the Portuguese SME context. The benefits and obstacles of these technologies in transitioning procurement into a more strategic role are analyzed. By examining existing literature, critical factors for organizations to consider when implementing these technologies and the potential benefits are identified. The results indicate that digitalization has resulted in a data-driven approach to procurement, with the aid of advanced analytics and artificial intelligence for decision-making. Industry 4.0 has facilitated smarter factories, warehouses, and logistics operations with a focus on automation, connectivity, and real-time data. Procurement can more efficiently manage suppliers, track contracts, identify cost-saving opportunities, and increase sustainability with the aid of information systems. The study also highlights potential challenges for organizations. Overall, this study provides insightful findings on the role of digitalization in transforming procurement and the challenges and opportunities that organizations may face.

Cut flowers of Gerbera jamesonii, renowned globally for their vibrant colors and extended shelf life, play a pivotal role in the flourishing floriculture industry. However, repeated fertigation in nethouses/polyhouses poses a significant challenge leading to production losses. In response to this challenge, we hypothesized that the application of Ascorbic acid (AsA), an antioxidant, in optimal concentrations could alleviate the detrimental effects of salt toxicity and enhance Gerbera production. Our objective was to investigate the impact of exogenous AsA (1.0 mM, 2.0 mM, and 4.0 mM) as a foliar spray, followed by NaCl (200 mM) treatment, across two cultivars of Gerbera: white-flowered (salt sensitive) and yellow flowered (salt tolerant) cultivars. The research employed a comprehensive approach, applying AsA and NaCl treatment to evaluate their effects on chlorophyll, proline, and total soluble protein content, MDA, H2O2, and antioxidant enzyme activities (SOD, CAT, APX, GR, and POD). Following exposure to 2.0 mM AsA, treated plants displayed a notable increase in chlorophyll, Proline, and soluble protein content. Concurrently, MDA and H2O2 levels, indicator of intracellular damage, exhibited a decrement, suggesting AsA's protective role against salt stress. Moreover, enhanced antioxidant Enzyme activities were observed. The application of AsA (2.0 mM) not only induced salt tolerance in Gerbera but also showed potential benefits for its overall growth and development. This study underscores the promising role of AsA in mitigating salt-induced challenges in Gerbera cultivation.

This article explores the concept of sustainable leadership in the digital era and the role of technology in promoting environmental sustainability. As the world becomes increasingly interconnected through digital advancements, leaders are facing new challenges and opportunities to address environmental concerns. This article examines the key characteristics of sustainable leadership and discusses how technology can be utilized to promote environmental sustainability. It highlights various technological innovations and strategies that leaders can employ to foster a sustainable organizational culture. Moreover, the article discusses potential barriers and limitations of technology in achieving sustainability goals. Overall, it emphasizes the significance of sustainable leadership and technology integration in addressing environmental challenges in the digital era.

Hydrogels are water-absorbing polymers that can hydrate forage plants in the soil. The objec-tive was to evaluate the replacement of synthetic hydrogels derived from petroleum by biode-gradable hydrogels in Mombaça grass pastures (Megathyrsus maximum). The experimental treat-ments consisted of: No hydrogel (NH); Synthetic commercial hydrogel (CH), made from a syn-thetic polyacrylamide product; and Biodegradable test hydrogel (TH), obtained from cashew gum (Anacardium occidentale). The experimental design was randomized blocks with five replica-tions and three treatments. Morphogenesis, production, chemical and mineral composition of the Mombaça grass pasture were assessed. The data was subjected to analysis of variance and mean comparison by the Snott-Knott test at 5% probability. Leaf elongation rate was 42.3 mm day-1 in the TH treatment, which was higher (P<0.05) than NH (35.0 mm day-1). Green leaf mass yield was higher in TH in comparison to NH and CH. On the other hand, there was no effect of hydration on chemical composition. The mineral composition of Mombaça grass showed more Zn when TH was used. It can be concluded that biodegradable hydrogels can replace synthetic commercial hydrogels in pastures.

In water scarcity regions, using data-driven approaches to predict groundwater level is challenging due to limited data availability. However, these regions have substantial water needs and require cost-effective groundwater utilization strategies. In this study, we use artificial intelligence to predict groundwater levels to provide guidance for drilling shallow boreholes for subsistence irrigation. The Bilate watershed, which is located in southern Ethiopia, was selected as the study area. This is typical of areas in Africa with high demand for water and limited availability of well data. Using a non-time-series database of 75 boreholes, machine learning models including multiple linear regression, multivariate adaptive regression spline, artificial neural networks, random forest regression, and gradient boosting regression (GBR) were constructed to predict the depth to the water table. 20 independent variables were considered in the models. GBR performed the best of the approaches with an average 0.77 R-squared value on testing data. Finally, a map of predicted water levels in the Bilate watershed was created based on the best model with water levels ranging from 1.6 to 245.9 meters. With the limited set of borehole data, the results show a clear signal that can provide guidance for borehole drilling decisions for sustainable irrigation with additional implications for drinking water.

Interior designers play a pivotal role in shaping the built environment and catalyzing positive change through the adoption of sustainable design practices. This study centers on the analysis of prevailing attitudes held by interior designers in Jordan towards sustainable interior design practices. Through a comprehensive methodology involving a literature review and a three-part questionnaire, the research explores the benefits, challenges, and integration of sustainability principles. The study highlights substantial awareness (85%) of sustainable interior design's environmental impact and resource preservation. Additionally, 81% acknowledge its enduring significance, and 89% recognize its diverse benefits. While 61% exhibit familiarity, 27% claim professional experience. Among sustainability indicators, energy efficiency scores 4.25, resource efficiency 4.27, and "Design aligns with laws and regulations by the Ministry of Labor" ranks highest at 4.37. This study significantly augments our understanding of sustainable interior design by introducing a comprehensive evaluation framework that encompasses the three sustainability dimensions. It equips decision-makers with a robust tool to identify specific practices that bolster sustainability performance, further advancing the field.

Cascalote pods are an important source of phenolic compounds, mainly recovered using solvent extraction methods. As a sustainable alternative, this study aimed to evaluate solid-state fermentation (SSF) to enhance the extractability of total phenolic compounds (TPC) with antioxidant activity (AA) from cascalote pods. Aspergillus niger GH1 was selected based on the amount of TPC released and AA measured (ABTS, DPPH, FRAP) in a shorter time. Moreover, moisture, temperature, inoculum size, and mineral composition were evaluated. The largest amount of TPC released was 124.17 mg/gdm (g of dry material) after 12 h of culture, strongly and highly significantly correlated with the AA. Moisture and KH2PO4 concentration were the main influencing factors on TPC release. Treatment 6 [1x 107 spores/gdm, 30 °C, 60% moisture, mineral composition (g/L): KH2PO4, 1.52; NaNO3, 7.65; and MgSO4, 1.52] was selected due to the highest values of both TPC and AA. SSF-assisted extraction allowed increase 118 % and 93 % in TPC and AA values, respectively. Corilagin, lagerstannin, geraniin, and ellagic acid were the main phenolic compounds identified by RP-HPLC-ESI-MS in cascalote extracts. The results obtained demonstrate the feasibility of SSF-assisted extraction as a biotechnological alternative for the recovery of important bioactive molecules from this underutilized material.

Since the 1990’s, studies and pilot tests have been conducted to reduce traffic, accidents, and pollution due to urban freight transport (UFT). These ended up in several policies, regulations, and restrictions for UFT, such as low emission zones, delivery time windows, and vehicle size and weight restrictions. However, issues in UFT under regulatory measures still persevere. This study introduces an optimization framework for deriving an optimal combination of various types of vehicles with different capacities for vehicle replacement in UFT. This framework allows an understanding of how an urban freight company with a limited budget efficiently satisfies its freight demand within an urban area in the presence of regulatory measures by urban administrators. The introduced formulation, which is a mixed-integer linear programming, will assist the operator in choosing the best investment strategy for introducing new vehicles of certain types and sizes, for operation in different zones, into its fleet while gaining economic benefits and having a positive impact on the liveability of the urban area. Furthermore, a sensitivity analysis is performed to consider the effects of specific uncertain parameters on the total cost. The numerical results show that the share of electric vehicles in the fleet increases, and they are more competitive than diesel vehicles.

The development of subterranean non-motorized traffic infrastructure, commonly referred to as the underground pedestrian system (UPS), has become increasingly necessary in densely populated megacities worldwide as a means of advancing the Sustainable Development Goal 11, which aims to promote sustainable cities and communities. To improve the overall spatial performance, it is imperative to decipher the fundamental formation mechanism of sustainable underground pedestrian systems (SUPS) that is simultaneously influenced by spatial morphology and pedestrian behaviors. Thereby, two representative case studies, namely Wujiaochang UPS and Loushanguanlu UPS located in Shanghai, were selected for an in-depth investigation. This study employed correlation and regression analysis to examine the impact of spatial configuration variables and spatial attribute factors on pedestrian flow distributions in distinct SUPSs. The findings indicate that the variables of Betweenness, as measured by both Euclidean and Angular metrics, along with the presence of metro station locations and commercial space connected by UPS, are the three most significant factors influencing pedestrian behaviors in both scenarios. The disclosure has been made that Wujiaochang UPS is seamlessly integrated into a comprehensive three-dimensional pedestrian network both above and below ground. On the other hand, it appears that Loushanguanlu UPS exhibits a greater degree of self-sufficiency as an underground system. This study aims to elucidate the mechanism underlying the development of SUPSs, thus offering effective guidance for the implementation of three-dimensional walking systems in cities that prioritize sustainability.

Today, the digital economy has pursued the required social and economic development, and enterprises can achieve long-term sustainability by relying on the digital platform ecosystem. However, the development of the digital economy and the rapid growth of platform ecosystems have also generated some problems. To study effective digital platform ecosystem governance, this study used the tripartite evolutionary game method and analyzed the changes and effects of platform regulation under different development stages from the perspectives of government, platforms, and enterprises. The results indicate that in the early stages, digital platforms primarily relied on the government’s obligation to regulate. With the digital platform ecosystem’s evolution, the platform organization and settled enterprises’ governance effects gradually appeared, establishing the three common constraints of governance mode. Finally, when the digital platform ecosystem is in its self-renewal period, the government effect is reduced, with the platform itself and settled enterprises taking primary supervisory roles. This study provides reasonable methods for effective platform governance at different stages and enriches the theoretical basis and management practices of platform ecosystems.

With the disruption of digital technologies, customers have emerged as co-producers in order to reduce costs and enhance productivity. Customer-driven business logic recognizes customer capabilities and sustainable innovation as key factors in the performance of customized manufacturing enterprises. The potential relationship between customers and producers has become a new area of inquiry. Existing research rarely delves into the impact of customer predictive ability on the process of customized production activities, particularly in relation to sustainable innovation, which remains inadequately characterized. Ships serve as a typical representation of customized enterprises. This study explores the underlying drivers of sustainable innovation through customer demand orientation by examining 20-year historical patterns in the global shipping and shipbuilding markets, considering the environmental dependency and temporal correlation characteristics of the shipbuilding market (producers) and the shipping market (consumers). By employing time series and panel data in a machine learning algorithm, specifically the random forest model, the study reveals a strong and statistically significant correlation between new ship deliveries and the Baltic Dry Index (BDI), with larger value ships having a more pronounced impact on the consumer market. The correlation analysis confirms that these two variables, in combination, can comprehensively reflect customer predictive ability and serve as crucial decision criteria for customer investment in new ship production. Furthermore, based on principal component analysis of customer predictive ability and ship innovation levels, as well as Granger causality tests, the study demonstrates that customer predictive ability is a Granger cause of sustainable innovation in customized production. Customer predictive ability influences sustainable innovation in customized enterprises to varying degrees. This research provides valuable insights for shipbuilding companies in terms of engaging in sustainable innovation in international markets and understanding the value of international market customers.

The mathematical modelling of reverse logistics inventory systems ignores that returned items may arrive out of sequence, i.e. with different number of remanufacturing times. Moreover, such modelling assumes that the retuned items may retain the same quality upon recovery regardless of how many times they have been previously remanufactured. This paper develops a new mathematical expression of the percentage of retuned items that can be remanufactured a finite number of times. The proposed expression is modelled as a function of the expected number of times an item can be remanufactured on its life cycle and the number of times an item can be technologically (or optimally) remanufactured based on its quality upon recovery. The model developed in this paper considers joint production and remanufacturing options. The return rate is a varying demand dependent rate, which is a decision variable with demand, product deterioration, manufacturing and remanufacturing rates being arbitrary functions of time. The model considers the initial inventory of returned items in the mathematical formulation, which enables decision makers to adjust all functions and input parameters for subsequent cycles. Illustrative examples indicate that dependent purchasing price of recovery items and the incorporation of remanufacturing investment cost significantly impact on the optimal remanufacturing policy.

Ethiopia has 74.3 million hectares of arable land and an irrigation potential of 3,088,395 hectares. Despite the country's vast irrigation potential, it hasn’t benefited much. A huge percentage of Ethiopia’s population is currently food insecure and a very significant portion lives under the national poverty line. Studies have confirmed the role of irrigation in alleviating poverty and promoting food security. Irrigation plays a huge role in poverty reduction, especially in developing countries like Ethiopia where agriculture is the backbone of the economy and the major source of employment. Irrigation does so by boosting farmer incomes, improving crop productivity, providing more employment and better pay rate, and contributing to the national GDP in the long run. Irrigation also promotes food security by contributing to all the dimensions including, food availability, access to food, food utilization, and stability. Given such importance of irrigation in poverty and hunger alleviation, it’s believed that the development of the sector massively contributes to the realization of sustainable development goals (SDG). Hence, this article voices the need for exploiting the huge irrigation potential and improving the irrigation sector, in order for the country to pull its population out of the misery of hunger and poverty.

Strategic management sets the direction of a company for several years ahead. Managers and business owners who create strategy must anticipate and have the ability to see systemically—the paper deals with creating a logistics strategy for a company operating in the industrial sector. The first section summarises the theoretical background for strategy and logistics and current trends affecting logistics processes. The second chapter analyses the current state of the art in logistics strategy development and summarizes its problem areas. The central part of the paper is the proposal of a methodology for logistics strategy development in the industrial area by a progressive approach. The methodology is divided into 5 phases - preparatory, analytical, formulation, implementation, and evaluation and control phases. The methodology is partially validated. The created variants of the logistics strategy include the introduction of such elements that will lead to the gradual development of the Industry 4.0 trend in the given company. This is mainly the first variant called "automation," which includes the introduction of an automatic tractor for material import, the introduction of an automatic system for transport and storage of work in progress, and the introduction of a new logistics information system that will make greater use of already established barcodes (transparency, data in real-time).

Collagen is the most abundant protein in the animal kingdom. Industrial collagen is mainly bovine and porcine origin. However, due to religious beliefs, allergic issues, and infectious diseases, alternative sources of collagen as marine are gaining increasing interest. In this work, the acid-soluble collagen (ASC) were extracted from salt-cured Atlantic cod (Gadus morhua) skin and characterized. The extraction yield was about 2.0%, equivalent to the extraction yield reported for other fish skins. The electrophoretic pattern showed the typical type I structure (α, β and γ chains). UV-VIS and FTIR absorbance spectra suggested a very pure ASC with an intact triple helical structure. The integrity and the adequate porosity required for different applications were then confirmed by electron micrograph. Our findings allow us to say that, for the first time, we extracted acid-soluble type I collagen from salt-cured Atlantic cod skin, with characteristics suitable for application in various fields, such as biomedical.

A sustainable diet which is healthy and environmental friendly is a climate change mitigation option in addition to being a health promoting diet. However, there is a scarcity of information if the Asian diets are sustainable. Therefore, this study aimed to investigate if the diet of the Malaysian population is healthy and sustainable. This is a cross sectional study using dietary data generated from food frequency questionnaires (FFQ). The carbon footprint data were linked with the food items/ food groups in the FFQ. The nutrients of the participants’ diet were computed and the proportions of those who met the recommended nutrients intake were established. Contribution of carbon footprint for different food groups and total carbon footprint for each participant’s diet were computed and expressed as kgCO₂eq. Comparison of carbon footprint from participants’ diets between age, sex and ethnicity were carried out. A total of 4825 participants were included in the analysis. Majority were Malays (66.4 %), females (84.0%), married (80.0%) and in the age groups of 30s to 40s (68.8%). The mean total energy intake was 2485+1000 kcal/day. Only 40 to 60% of all participants achieved the Malaysia Recommended Nutrient Intake (RNI) for calcium and less than half of the female participants who were aged 50 years and below fulfilled the RNI for iron. The most commonly consumed food groups were vegetables (270g/day), wheat, rice, fruits, sugar, seafood, poultry, legumes, snacks, milk and beef (46g/day). Total carbon footprint from the participants’ diets were 2.96 kgCO₂eq/day, with the highest contributions of carbon footprint from rice, vegetables, beef, sugar, other cereals, poultry, seafood, wheat, milk, fruits, legume and snacks. Subgroups such as males, Malays and younger participants were more likely to consume diets with higher carbon footprint, compared to their counterparts. The participants’ diet was low in carbon footprint and environmentally friendly, however the quality of diet may need to be improved. Education measures should be targeted for all population and specifically for the sub-groups that consumed diets with higher carbon footprint.

The purpose of this article is to draw attention to the challenges faced by business organizations implementing sustainable solutions in the United Arab Emirates (UAE) and the wider Gulf Coast Countries (GCC) region. To this end, our study examines an academic theory supporting the implementation of responsible solutions to the market. Ultimately, the authors hope to inspire the reader to consider what he or she can do to ameliorate the existing challenges encountered by sustainable businesses. The analysis presented in this article implies that in recent markets, the implementation of the sustainability theory is essential for further development. The research project contributes to the increase of knowledge about corporate and organizational challenges related to running a responsible business, as well as challenges related to the application of environmental, social and economic aspects of sustainable business practices. The research is currently limited to conceptual analysis, literature review and a survey conducted during the Sustainability Week 2019 in Abu Dhabi, United Arab Emirates. Nevertheless, this is the first stage of the research project conducted by the research team in cooperation with enterprises that implement responsible solutions in many global markets, and in UAE market. The scope of the first stage of the study was limited to the analysis of data clarifying the concept of the model specified in the research. To prove the validity of the model it will be implemented and tested in cooperation with organizations participating in the research.

This study investigates how the determinants including risk preference affect farmers’ decision to adopt SLM practices in upland areas of Vietnam. Empirical data collected through in-depth interviews with 200 farmers in Na Ri district, Bac Kan province were used. The factors affecting SLM adoption of farmers in Na Ri district were examined by the 2SLS or IV-Probit model. The estimated 2SLS regression indicated that there is a set of factors affecting SLM adoption, namely, relative risk aversion, farming experience, farm size, knowledge of SLM, membership in farmers’ organization, number of labors, and slope of farm land. Specifically, relative risk aversion had a negative effect on SLM practices adoption. The farmers who are less risk averse are more likely to adopt more SLM practices. This implies that reducing farmer’ risk exposure could promote SLM practices. This result is also helpful for policymakers to understand farmers’ behaviors and promote the diffusion of SLM practices across regions on a large scale.

As reflected in the sustainable development goals (SDG), sustainable development is a multi-dimensional concept integrating political, ethical, economic and other factors. Reports from the UN decade of Education for Sustainable Development (UNDESD) suggest that universities are more engaged with sustainable development in higher education (HESD). Despite promising signals about student awareness of sustainable development, survey studies suggest student engagement and knowledge is limited in addressing social and economic factors. This study evaluated how UK students enrolled in postgraduate taught sustainability degrees responded to the multi-dimensional issues of sustainable development. Consolidating work by Baker on the multi-dimensional ladder of sustainable development, this study piloted a 39 question 7-point Likert scale survey with a cohort of UK taught postgraduate (MSc, MPhil) students (n=121, Cronbach Alpha 0.796, n=39 Questions). Subsequent removal of questions duplicating content and replacement of missing values produced better results (0.810 Cronbach Alpha, n=30 Questions). The study found this cohort able to recognize and respond to the multiple challenges of strong and weak sustainable development issues. Results also suggest that future studies could limit the number of questions Results and qualitative comments from the survey suggest, however, students resist the idea of strong interventions in social, political and economic life.

Disaster Risk Reduction (DRR) is a high priority on the agenda of main stakeholders involved in sustainable development and Earth Observation (EO) can provide useful, timely and economical information in this context. This short communication outlines the European Space Agency’s (ESA) specific initiative to promote the use and uptake of satellite data in the global development community: ‘Earth Observation for Sustainable Development (EO4SD)’. One activity area under EO4SD is devoted to Disaster Risk Reduction: EO4SD DRR. Within this project, a team of European companies and institutions are tasked to develop EO services for supporting the implementation of DRR in International Financial Institutions’ (IFI) projects. Integration of satellite-borne data and ancillary data to generate insight and actionable information is thereby considered a key factor for improved decision making. To understand and fully account for the essential user requirements (IFI & Client States), engagement with technical leaders is crucial. Fit-for-purpose use of data and comprehensive capacity building eventually ensure scalability and long-term transferability. Future perspectives of EO4SD and DRR regarding mainstreaming are also highlighted.

Students who had been actively engaged in mediated collaborative activities, were asked for their perceptions about the sustainable peer feedback they had received and provided. Their views were then analyzed and categorized in terms of receiver and provider feedback, cognitive feedback and previously acquired feedback to further knowledge about sustainable education processes. A peer supported feedback questionnaire was created and validated, and its categories were correlated. The questionnaire was then aligned with the activities used to foster peer feedback between the pre-service students from the three bachelor’s degrees. The perceptions the students had of the feedback processes were analyzed using defined peer support feedback categories and the results showed a correlation between cognitive feedback and both provider and receiver self-efficacy feedback. In addition, there was a further correlation between both provider and receiver self-efficacy feedback as well as provider and receiver involvement and feedback structure. However, the results also revealed that neither receiver nor provider autonomy support were significant categories for supportive feedback.

The contents of Education for Sustainable Development (ESD) should be included in teachers’ initial and advanced training programs. In order to determine the key competences for sustainability, creating a Sustainable Consciousness is one of the main foundations. However, there are not many empirical studies that deal with consciousness from education. In this context, e-portfolio appears as a tool that promotes reflection and critical thinking, key competences for consciousness development. This work intends to propose a categorization system to extract types of consciousness and identify trainee teachers’ levels of consciousness. For this research work, of an eminently qualitative nature, we have selected twenty-five portfolios of students in the last year of the School of Education at the University of Macerata (Italy). The qualitative methodological procedure followed allowed to deduce three bases that shape trainee teachers’ consciousness: thinking, representation of reality and type of consciousness. We concluded that the attainment of a Sustainable Consciousness in teachers requires activating and developing higher levels of thinking, as well as a projective and macrostructural representation of reality.

Data mining plays a critical role in the sustainable decision making. The k-prototypes algorithm is one of the best-known algorithm for clustering both numeric and categorical data. Despite this, however, clustering a large number of spatial object with mixed numeric and categorical attributes is still inefficient due to its high time complexity. In this paper, we propose an efficient grid-based k-prototypes algorithms, GK-prototypes, which achieves high performance for clustering spatial objects. The first proposed algorithm utilizes both maximum and minimum distance between cluster centers and a cell, which can remove unnecessary distance calculation. The second proposed algorithm as extensions of the first proposed algorithm utilizes spatial dependence that spatial data tend to be more similar as objects are closer. Each cell has a bitmap index which stores categorical values of all objects in the same cell for each attribute. This bitmap index can improve the performance in case that a categorical data is skewed. Our evaluation experiments showed that proposed algorithms can achieve better performance than the existing pruning technique in the k-prototypes algorithm.

Methylene blue (MB) is a dye hazardous pollutant widely used in several industrial processes that represents a relevant source of water pollution. Thus, the research of new systems to avoid its environmental dispersion, represents an important goal. In this work, an efficient and sustainable nanocomposite material based on green gold nanoparticles for MB water remediation, was developed. Starting from reducing and stabilizing characteristics of compounds naturally present in Lambrusco winery waste (grape marc) extracts, green gold nanoparticles (GM-AuNPs) were synthesized and deposited on a supporting membrane to create an easy and stable system for water MB decontamination. GM-AuNPs, with a specific plasmonic band at 535 nm, and the modified membrane were firstly characterized by UV-vis spectroscopy, X-Ray diffraction (XRD), and electron microscopy. Transmission electron microscopy analysis revealed the presence of two breeds of crystalline shapes, triangular platelets and round-shaped pentatwinned nanoparticles, respectively. The crystalline nature of GM-AuNPs was also confirmed from XRD. The photo-catalytic performance of the modified membrane was evaluated under natural sunlight radiation obtaining a complete MB degradation (100%) in 116 minutes. A pseudo-first-order kinetic described the photocatalytic process with a rate constant k equal to 0.044 ± 0.010 min-1. The modified membrane demonstrated high stability since it was reused, without any treatment, for 3 months and for at least 20 cycles maintaining the same performances. GM-AuNPs-based membrane was also tested with other water pollutants (methyl orange, 4-nitrophenol and rhodamine B revealing a high selectivity towards MB.

This study considers ways to increase the consumption of sustainable fashion, given the significant environmental and social damages, associated with the industry. A series of experiments were conducted examining the impacts of choice architecture (nudges) under field conditions in collab-oration with one of Israel’s largest shopping centers. The study sought to identify which inter-ventions at the retail level successfully motivate sustainable fashion behavioral change regarding purchases and willingness to pay more, along with agreement with several statements regarding the climate crisis and sustainable fashion. Among the types of nudges examined in this field study were providing information, increasing accessibility to sustainable alternatives and appealing to social identity, in relation to demographics and green self-image. The study found that offering alterna-tives to consumers constitutes the most effective way to “nudge” consumers toward more sus-tainable purchasing behavior. Nonetheless, this does not negate the contribution of providing in-formation and strengthening social norms regarding sustainable fashion. Additionally in all groups, most participants reported that they do not know how to distinguish between sustainable and non-sustainable fashion, nor do they believe that the clothes they purchased were actually sustainable. The findings emphasize the need for policies that will increase the accessibility of sustainable fashion.

Brazil became a major player in the global beef market, after the market liberalization in the 1990’s, and experiencing a substantial development. Nonetheless, the environmental impact of beef production associated with land use and greenhouse gas emissions has been under discussion. The necessity of increased adoption of sustainable technologies, however, may preclude some farmers to keep up to date with technological advances. This article describes the major historical changes in beef farming and how they have been shifting production systems toward a sustainable intensification of grass-fed beef, with likely impacts for farmers. We combined an extensive literature review, public data and our own insights, as senior researchers, to achieve that. The trajectory shown here evidenced the substantial technological development underway in Brazilian beef farming, with strong support of public policies for decarbonizing agriculture. Nonetheless, the pace of this sustainable transition may affect small to medium farmers unable to cope. Our recommendations, therefore, involve a broad program of technical assistance and training on sustainable technologies and other supportive practices, including financial and digital literacy. Additionally, we suggest an alternative credit system, with progressive borrowing allowances to ensure financial resources to support a sustainable and inclusive transition of Brazilian beef farming.

The expansion of food production is getting more important due to a rising world population, which is relying on food security on a regional and local scale. Intensive food production systems create a negative impact on the regional ecosystem because of agrochemical pollution and nutrient rich water discharges into nearby rivers. Furthermore, these systems are highly depending on regional water resources causing water scarcity and soil erosion due to the overexploitation of natural resources in general. The objective of this article is to review the water usage in the two most water intensive food production systems, agriculture and aquaculture showing lacking areas, like system management and climate change, which must be considered in the implementation of sustainable water footprint. In addition, the review includes an analysis if the combination of both production system into aquaponic food production and the possibilities of water saving. There are a variety of water footprint analyses for crop and aquatic animal production, but there is also a lack of information about the system management including irrigation systems, system cleaning processes, water substitution, pond removal, evaporation due to climate change and especially in aquaculture, the water footprint of industrial elaborated fish feed.

: This study aims at examining how B Corporations advance Sustainable Development Goals (SDGs) in their practices by analyzing the socioenvironmental problems they address and the solutions they provide to those problems. All Argentinian B corporations, certified by early 2023 (135 companies), were investigated using a mixed approach, combining social network analysis with textual data analysis. The results showed that the environmental practices are primarily linked to waste, water, energy and chemical management, as well as product innovation. In turn, the social practices address the training, education, and well-being of employees and other stakeholders, diversity, equity and inclusion management, and the creation of an inclusive and fair environment, integrating local communities. Thus, in the flow of their sustainability practices, Argentinian B Corporations contribute to SDGs 8, 12, 13, 9, 6, 7, 5, 10, 11, 4, and 17, in line with the SDGs declared by these companies. Our findings contribute to the theoretical knowledge of the B Corp movement and have practical implications by providing inputs to improve the management of B Corporations and to guide public policies encouraging these companies to advance sustainable development dimensions lacking attention.

This brief communication intends to develop critical thinking on the development at different levels that could be evaluated in the well-being of humans from the local development towards a global scale or planetary point of view. Therefore it was presented and discussed how Artificial Intelligence tools could provide important contributions and influence in the design of critical thinking to develop ideas and insights within Research as well as funding for technology transfer. In this context it should be highlighted that the generation of funding and economy for sustainability that it should be based on critical thinking and analysis of what is need it from the close surrounding towards longer distances as well as in the inversed direction. In this regard, the main axes that support it are based on the importance of entailment of individuals in their close surrounding as well as to longer physical distances and cultural differences. An in this context it should be highlighted the existence of large diversity and varied Multicultural differences. These factors could affect the developments of technology, education; level, and quality of life. Thus the Economical and development indexes could be largely varied and different between them. For this reason it should highlighted the local development within shortened times by interacting to receive or provide materials with aggregated value or non-tangible values. Therefore, it could be accelerated the process of improvement in a targeted field looking for average homogeneous development everywhere. And there, it is where the link-up and transfer strategies of technology and education by creation of varied strategies in communication media. As for example the communication plays an important role to transfer knowledge within the different social status and imagining the development of thinking that later it will be the basis for the next generation of technology. By this manner, it could be coupled different levels of educations degrees by a factor in common related with curiosity and open minds to learn, work, and live together in the context of developments of new smart manners of living where economy and new encrypted currency are involucred and provide by different manners sustainability. In these perspectives the development and education at the University and higher degrees taking into account the transmission of important factors such as; i) entailment , ii) development of knowledge, and iii) transference, is fundamental. Finally, it should be highlighted the particular need of good human relationships, emotional intelligence, and diplomacy to afford from the simplest challenges to the higher ones.

Rice blast, caused by Magnaporthe oryzae, poses significant threat to rice production. Rice blast susceptibility has been observed in Japanese rice varieties with excellent eating quality. Enhancing blast resistance is essential to ensure minimal use of agricultural chemicals. Two types of blast resistance are observed: true resistance, which is a type of qualitative resistance expressed by a major gene, and field resistance, which is a type of quantitative resistance expressed by multiple micro-acting genes. ‘Resistance collapse’, in which a variety with a true resistance gene becomes diseased by blast fungus races compatible with the resistance gene, has been observed. Varieties carrying blast-resistance genes, such as Pb1 (panicle blast resistance 1), have been developed through DNA marker-assisted selection. In this review, we focus on the Pb1, which expresses strong quantitative resistance to panicle blast and has been widely used in Japan without showing ‘resistance collapse’ for 40 years. Pb1 is an ‘adult plant resistance gene’ that does not exert strong selection pressure on the blast population during the leaf blast stage, thus preventing the selective multiplication of Pb1-compatible blast strains. This epidemiological mechanism prevents ‘resistance collapse’. Interdisciplinary research and breeding are required to sustainably use genes that induce high field resistance.

This study aims to investigate the influence of various economic, environmental, and social factors on sustainable development, with a specific focus on the impact of green technology and climate change adaptation. A panel dataset comprising 38 OECD member countries from 1990 to 2020 is employed, and a series of dynamic panel data models are estimated using the system generalized method of moments (GMM) approach. Numerous covariates, such as globalization, socio-economic conditions, economic and political values, climate and technological progress, and environmental determinants, are examined. The empirical findings highlight the significant role played by macroeconomic, institutional, social, and government policy-related factors in sustainable development. More importantly, our results provide novel and robust evidence that the diffusion of green technology and climate change adaptation positively affect green growth. The study's empirical outcomes are demonstrated to be robust to misspecification errors and statistically significant at traditional significance levels. These findings carry substantial policy implications for the development and implementation of strategies that promote climate change adaptation and green innovation. Consequently, policymakers should prioritize the integration of green technology and adaptive measures in their sustainable development agendas to foster a greener, more resilient future.

Technological advancements and innovations have profoundly changed the lives of people giving rise to smart environments, cities, and societies. As homes are the building block of cities and societies, smart homes are critical to establishing smart living and are expected to play a key role in enabling smart cities and societies. The current academic literature and commercial advancements on smart homes have mainly focused on developing and providing smart functions for homes to provide security management and facilitate the residents in their various activities such as ambiance management. Homes are much more than physical structures, buildings, appliances, operational machines, and systems. Homes are composed of families and are inherently complex phenomena underlined by humans and their relationships with each other, subject to individual, intragroup, intergroup, and intercommunity goals. There is a clear need to understand, define, consolidate existing research, and actualize the overarching roles of smart homes, the roles of smart homes that would serve the needs of future smart cities and societies. This paper introduces our data-driven parameter discovery methodology and uses it to provide, for the first time, an extensive, rather fairly comprehensive, analysis of the families and homes landscape seen through the eyes of academics and the public using over a hundred thousand research papers and nearly a million tweets. We develop a methodology using deep learning, natural language processing (NLP), and big data analytics methods and apply it to automatically discover parameters that capture a comprehensive knowledge and design space of smart families and homes comprising social, political, economic, environmental, and other dimensions. The 66 discovered parameters and the knowledge space comprising 100s of dimensions are explained by reviewing and referencing over 300 articles from the academic literature and tweets. The knowledge and parameters discovered in this paper can be used to develop a holistic understanding of matters related to families and homes facilitating the development of better, community-specific, policies, technologies, solutions, and industries for families and homes, leading to strengthening families and homes, and in turn, empowering sustainable societies across the globe.

In order to meet the needs of an increasingly complex research landscape, researchers engage in “collaborative prosumption” through open data sharing and reuse. Although significant gains have been achieved in this regards because of growing requirements from funding agencies, governments and journals, the question of how reuse of openly available data for new research contribute to sustainability is yet to be appropriately addressed in the literature. Therefore, relying on a three stage stratified clustered random sampling of the Journal of Applied Econometrics data archive (JAEDA), the present research provides a case study of the value of research data recycling for sustainable research and economic development. More specifically our analysis show that reformatting from wide to long format, openly shared equity price index data on eleven European countries’ extracted from JAEDA, and augmented with country level geospatial Meta data, provides a new basis for interesting descriptive analytics and spatio-temporal econometric modeling and inference. Given the ever-increasing volume of openly available research data, our study provides a first-hand insight on open data reuse, which should benefit all stakeholders in the research community, as they seek sustainable solutions for scientific productivity and progress.

Variations in liver metabolism as a result of hepatitis C virus have been established by numerous clinical trials. The use of antioxidants supplements has been reported to minimize the implication of this disease. In this regard, we examined the suitability of Solanum fruit juice, a natural source of vitamin C and citrus flavoniod as a precursor for the treatment of patients with chronic hepatitis C. Forty adult patients who were diagnosed with chronic hepatitis C and were under antiviral therapy were divided into two equal groups. Group 1 patients received their antiviral therapy with normal food and water and served as the control group while patients in group 2 were supplemented with Solanum fruit juice for eight consecutive weeks. Measurements for Anthropometric data, C reactive protein (CRP), atherogenic indices, biochemical parameters and activities of liver marker enzymes were recorded before and after eight weeks. No alterations were found in waist circumference, body mass and body fat following regular use of Solanum fruit juice. The serum levels of oxidative stress markers, LDL-cholesterol, total cholesterol, CRP and atherogenic indices decreased in the Solanum fruit juice group when compared to the control group. Moreover, the activities of the liver marker enzyme AST decreased in those who had high levels before the intervention. These results underscore the benefits of Solanum fruit juice in the diet of patients with HCV as a result of decreased cholesterol in blood serum, decreased inflammation, and increase in antioxidant capacity as well as maintaining body mass index. This clinical trial is registered at Pan African Clinical Trial Registry (www.pactr.org) with unique identification number PACTR201802003092138.

This study investigates the properties of solution processed hybrid pol-yimide, PI nanocomposites containing a variety of nanofillers, including polyaniline copolymer modified clay, PNEA, nanographene sheets, NGS, and carbon nanotube sheet, CNT-PVDF, respectively. Through a series of experiments, the flow behavior of poly(amic acid), PAA solution and PAA suspension containing polyaniline copolymer modified clay, PNEA was determined as a function of the shear rate, processing temperature and polymerization time. It is shown that the neat PAA solution exhibited a complex rheological behavior ranging from shear thickening to New-tonian behavior with increasing shear rate and testing temperature. The presence of modified clay in PAA solution significantly reduced the viscosity of PAA. Differential Scanning Calorimetry (DSC) analysis show that polyimide-nanographene sheets, PI NGS nanocomposites processed at high spindle speed (100 rpm) had lower total heat of decomposition which is indicative of improved fire retardancy. The effect of processing temperature on the specific capacitance of polyimide-CNT-PVDF composites containing electrodeposited polypyrrole fillers was determined by using cyclic voltammetry, CV. It was shown that the hybrid composite working electrode material processed at 90˚C produced a remarkably higher overall stored charge when compared to the composite electrode material processed at 250˚C. Consequently, the specific capacitance ob-tained at a scan rate of 5 mV/s for the hybrid nanocomposite processed at 90°C was about 858 F/g after 1 cycle, which is about 6.3 times higher than the specific capacitance of 136 F/g produced by the hybrid nanocomposite processed at 250°C. These findings show that the properties of the hybrid nanocomposites are remarkably influenced by the processing conditions and highlights the need for process optimization.

With the economic recession and the deterioration of the ecological environment becoming more and more prominent in the world, the sustainable operation of enterprises is facing the most difficult choice in history. For each responsible enterprise, it is crucial to choose the market power expansive strategy that can improve the realistic viability or the technological innovation strategy that can improve the future development potential. This is of great significance to reduce the negative external effects of the corporate social environment and ensure their sustainable development. In this paper, we select the data of 18 large listed petrochemical companies from 2003 to 2018 as samples and construct a linear regression model for empirical analysis. Meanwhile, we put forward more practical business management strategies for the sustainable development of petrochemical enterprises in developing countries in further research.

The Sustainable Development Goals (SDGs) 4, 5 and 9 are related to the quality of education, gender equality and the use of new technologies. It is important to bear in mind that a major part of the success of education has to do with students' motivation, which is closely connected to the use of technologies in the classroom. For this reason, a study was carried out with 131 students aged 12 and 13, 58 girls and 73 boys, who use a tablet in their Science classes. The purpose of the study was to determine, based on the Self Determination Theory, the level of intrinsic motivation of those adolescents towards the use of tablets in the classroom. The study measured the interest they have in the tasks and the value they assign to said tasks, as well as their perception of their competence in using tablets. The results reveal that students' motivation is high without significant differences between girls and boys when technological resources are included in teaching-learning processes. This is reflected by the improvement of their academic performance. It is thus possible to state that SDGs 4, 5 and 9 can be achieved.

This paper explores decision analysis on product integration of family security services and residential fire insurance in the London and Taiwan markets by using the proposed mathematical models for counting sustainable value. This paper shows the five main different results between London and Taiwan markets with ten different parameters of the family security market, to find out the optimal number of family security integrated services for each security company in London. The improvement of the risk aversion effect based on risk and financial management will enhance the market share of the private security industries in the London and Taiwan markets. The results of this research can serve as a reference for the decision-making of private security industries on product integration under sustainable value consideration. The research findings highlight the potential benefits for both the private security industry and the insurance industry in their design and negotiation for product integration to improve both of business operation and achieve corporate social responsibility goals to match the sustainability in the future.

Herein, we introduce a boron nitride nanosheet (BNNS)-reinforced cellulose nanofiber (CNF) film as a sustainable oxygen barrier film that can potentially be applied in food packaging. Most of commodity plastics are oxygen-permeable. CNF exhibits an ideal oxygen transmittance rate (OTR) of <1 cc/m²/day in highly controlled conditions. A CNF film typically fabricated by the air drying of a CNF aqueous solution reveals an OTR of 19.08 cc/m²/day. The addition of 0-5 wt% BNNS to the CNF dispersion before drying results in a composite film with highly improved OTR, 4.7 cc/m²/day, which is sufficient for meat and cheese packaging. BNNS as a 2D nanomaterial increases the pathway of oxygen gas and reduces the chances of pin-hole formation during film fabrication involving water drying. In addition, BNNS improves the mechanical properties of the CNF films (Young’s modulus and tensile strength) without significant elongation reductions, probably due to the good miscibility of CNF and BNNS in the aqueous solution. BNNS addition also produces negligible color change, which is important for film aesthetics. An in vitro cell experiment was performed to reveal the low cytotoxicity of the CNF/BNNS composite. This composite film has great potential as a sustainable high-performance food packaging material.

Sewage surveillance can be used as an effective complementary tool for detecting pathogens in local communities, providing insights into emerging threats and aiding in the monitoring of outbreaks. In this study using qPCR and whole genomic sewage surveillance, we detected Mpox virus along with other viruses, in municipal and hospital wastewaters in Belo Horizonte, Brazil over a 9 months period (from July 2022 till March 2023). MPXV DNA detection rates varied in our study, with 19.6% (11 out of 56 samples) detected through the hybrid capture method of whole genome sequencing and 20% (12 out of 60 samples) through qPCR. In hospital wastewaters, the detection rate was higher at 40% (12 out of 30 samples), compared to 13.3%(4 out of 30 samples) in municipal wastewaters. This variation could be attributed to the relatively low number of MPXV cases reported in the city, which ranged from 106 to 341 cases during the study period, and to dilution effects, given that each of the two wastewater treatment plants (WWTP) investigated serves approximately 1.1 million inhabitants. Additionally, nine other virus families were identified in both hospitals and municipal wastewaters including Adenoviridade, Astroviridae, Caliciviridae, Picornaviridade, Polyomaviridae, Coronaviridae (which includes SARS-CoV-2), Herspesviridae, Papillomaviridae and Flaviviridae (notably including Dengue). These findings underscore the potential of genomic sewage surveillance as a robust public health tool for monitoring a wide range of viruses circulating in both community and hospitals environments including MPXV.

Three-dimensional (3D) models with improved biomimicry are essential to reduce animal experimentation and drive innovation in tissue engineering. In the current study, we investigate the use of alginate-based materials as polymeric inks for 3D bioprinting of osteogenic models using human bone marrow stem/stromal cells (hBMSCs). A composite bioink incorporating alginate, nano-hydroxyapatite (nHA), type I collagen (Col) and hBMSCs was developed and for extrusion-based printing. Rheological tests perfomed on crosslinked hydrogels confirm the formation of solid-like structures consistently indicating a higher storage modulus compared to the loss modulus. The swelling behaviour analysis showed that the addition of Col and nHA into an alginate matrix can enhance the swelling rate of the resulting composite hydrogels, which maximizes cell proliferation within the structure. The LIVE/DEAD assay outcomes demonstrate that the inclusion of nHA and Col did not detrimentally affect the viability of hBMSCs over seven days post-printing. PrestoBlueTM revealed a higher hBMSCs viability in the alginate-nHA-Col hydrogel compared to the remaining groups. Gene expression analysis revealed that alginate-nHA-col bioink favoured a higher expression of osteogenic markers, including secreted phosphoprotein-1 (SPP1) and collagen type 1 alpha 2 chain (COL1A2), in hBMSCs after 14 days, indicating the pro-osteogenic differentiation potential of the hydrogel. This study demonstrates that the incorporation of nHA and Col into alginate enhances osteogenic potential and provides a bioprinted model to systematically study osteogenesis and the early stages of tissue maturation in vitro.

This article addresses the emergence of a niche for sustainable agricultural production in the province of García Rovira, Colombia. It examines the intervention of the Colombian planning regime, which implements agendas for sustainable territorial development. However, these agendas are not adequately aligned with provincial realities, resulting in a productive decline. From a multi-level perspective, a niche of production linked to the landscape is identified, highlighting sustainable practices and innovation. The study seeks to understand how planning influences the emergence of such niches and what factors boost their transition to sustainability. Through a mixed methodology, growing sectors are highlighted, and the profiles of the producers involved are outlined. The main conclusion is that the planned intervention is inefficient, as the niche of sustainable production emerges without its clear influence. Therefore, it is proposed to re-evaluate planning using alternative analysis frameworks to detect emerging productive dynamics, serving as a basis for future plans.

With the growing awareness of entrepreneurs and consumers of the tourism market in the field of sustainable development, it seems necessary to base hotel classification systems on an integrated approach to management quality, including fulfilment of ecological and environmental criteria. The article aims to indicate how environmental standards are implemented in the European system of hotel classification- HotelstarsUnion and the one in force in Poland. With regards to these systems, the differences in the classification criteria taken into account within the systems of hotel categorization by certifying organizations in the European Union in relation to the administrative hotel categorization system in Poland were pointed out. Particular emphasis was placed on the criteria related to environmental management in the hotel industry. Criteria related to environmental management were identified through analysis of the content of criteria of eight environmental management systems that are applicable to the contemporary hotel market. The results of the research proved that even though the HotelstarsUnion system takes into account the principles of sustainable development to a much greater extent than the Polish one, its primary weakness is that most of its criteria related to environmental ones are optional. In addition, the optional ones have higher weights than the obligatory ones. In turn, the Polish classification system makes very little reference to environmental standards. Moreover, it is not detailed and the assessment criteria are not up to date. Therefore, it is recommended that a greater number of environmental criteria is included when updating the HotelstarsUnion system, which should be obligatory for hotels to meet. In addition, the sustainability criteria included in the HotelstarsUnion system should be adapted to the policy system aimed at the hotel industry in Poland and other EU countries.

The allocation of funding for higher education typically focuses on competition in neoliberal mechanisms. Surprisingly, much less attention has been paid to considering the effect of fund locations for sustainable development through public goods purposes in neoliberal contexts. This study aims to examine specific funding schemes and determine the influential factors impacting funding for teaching, research, and public goods transformation. Taking Taiwan's Higher Education Sprout Project (HESP) as an example, we explored the effect of policy initiatives on public goods transformation towards sustainable development. The data were collected from the Ministry of Education and Scopus databases. First, a regression analysis was conducted to determine which factors influence the effect of funding allocations in academic institutes. Second, we used logistic regression to detect the effects of the system and the sector. Third, we used partial least square structural equation modeling (PLS-SEM) to explore the causal effects among the selected impact variables on expected outcomes. Finally, we used the bootstrap method to demonstrate the model’s robustness. Our study found that only diversity was shown in private technology groups receiving less HESP funding. At the same time, it did not widen the differences in the sector and system in the transformation process. Our findings suggest that funding allocations will not affect teaching and research based on sectors and systems. In contrast, this study demonstrates that transforming public goods through special funding can play a critical role in leading sustainable development in higher education.

This study examines the attitudes of healthcare organizations and employees in the Greek Healthcare System towards climate change and the influence of management in promoting environmentally friendly practices. A questionnaire was sent electronically to the 7 Health Districts of Greece and private sector healthcare workers associated with the researchers, while the sample consisted of service (administration, nursing, technical, and medical). The main findings indicate that public sector health organizations are lacking in motivating employees to adopt "green" actions during their work. Communication and information dissemination from administration to healthcare professionals were identified as significant challenges, resulting in participants being unsure of how to respond, in contrast to the private sector which showed slightly more positive results. Moreover, the study highlights a positive association between education level and voluntary green behaviors of employees. This research emphasizes the urgency to confront climate change in conjunction with the principles of Organizational Behavior within the Greek Healthcare System.

Embracing innovative digital technologies within educational systems is essential for overcoming challenges in modern learning environments, especially in the post-COVID-19 era. Teaching sustainability management in higher education institutions with innovative digital tools plays a fundamental role in the transition toward sustainable societies. Suitable game design elements play a significant role in facilitating sustainable learning. This study explored the effectiveness of incorporating business simulation games with project-based learning (PBL) in a flipped classroom setting. This approach was adopted within the context of a university cross-border e-commerce course to prepare students for acquiring 21st -century skills as higher-order thinking skills in a rapidly changing educational landscape. A quasi-experimental method was employed, involving a total of 60 university students from China's Zhejiang Province. Participants completed an online questionnaire designed to assess their learning engagement across three dimensions (cognitive, emotional, and behavioral) as well as their higher-order thinking skills (problem-solving, critical thinking, and creativity). The results show that the business simulation games combined with flipped classroom learning had a significantly positive impact on students’ learning outcomes, enhancing their problem-solving, critical thinking, and creative capabilities. Importantly, this approach also improved student engagement and promoted sustainable practices by applying real-life scenarios in an interactive environment. We conclude that business simulation games integrated with project-based learning (PBL) in flipped classroom settings represent a valuable educational approach. This approach not only enhances learning engagement but also fosters the development of higher-order thinking skills, encouraging students to adopt sustainable learning practices.

The increasing global demand for energy and the pressing challenge of environmental pollution necessitates a paradigm shift towards sustainable energy sources. Hydrogen, a viable renewable energy carrier, has the potential to substantially alleviate these concerns. This review offers a comprehensive exploration of the technologies imperative to the production and operation of fuel cell vehicles (FCVs), ranging from various fuel cell types, hydrogen storage methods, fueling station logistics, batteries in hydrogen vehicles, and the emerging influence of artificial intelligence and quantum computing. An analytical overview of global adoption patterns reveals significant geographical disparities, with the United States and South Korea at the forefront of FCV integration, primarily in the form of passenger cars, followed by buses and trucks. Asia emerges as the region with the highest proportion of FCVs. This paper also delves into the diverse challenges facing FCV implementation, shedding light on the essential role of continued investment in the evolution of sustainable transportation systems. Furthermore, it provides insights into the varying contributions of different companies in the field, demonstrating the collective effort required to advance this promising technology. The comprehensive exploration provided in this review aids in understanding the opportunities, challenges, and potential of hydrogen as an integral player in the future of sustainable transportation. The increasing need for energy carriers and the rise of environmental pollution have driven the exploration of renewable energy sources, with hydrogen being a promising option.

Failure to meet the deadlines for the implementation of investment and construction projects is a problem in all countries of the world, and leads to unstable activity of construction companies. The article studies the most important destabilizing factors affecting the main indicator of sustainable activity of construction companies-the duration of the implementation of an investment and construction projects. To determine and assess the impact of destabilizing factors on the duration of implementation of selected investment and construction projects, a survey was conducted, in which a number of customers, consultants and contractors involved in construction projects took part. Questionnaires developed on the basis of a cluster sample were sent to respondents, 48 responses were received in response to the assessment of destabilizing factors. To analyze the received and grouped information, structural equation modeling using the Smart-PLS program was used. As a result of modeling, a number of results were obtained, the most important of which are the identification of the main reasons that lead to an average (20% - 50%) increase in the duration of projects in the construction sector. The most significant were: the lack of an appropriate procurement program for materials; inefficient scheduling by contractors and instability of construction production; poor-quality processing of incoming information and untimely deci-sion-making due to changes in projects during their implementation. Destabilizing factors con-tribute to an increase in the duration of construction sector projects, which leads to time overruns, cost overruns, and an increase in the negative impact on the overall use of resources. As a result of the study, a set of recommendations was formed, the most important of which is the use of possible compensatory measures that can allow construction companies to eliminate the risks of disrupting construction deadlines for sustainable activities. These compensatory measures include: - recommendations to customers of the construction project; - recommendations to contractors; - recommendations to the consultant. Moreover, the control of destabilizing factors that can cause delays, the improvement of contracts and the precise and clearer definition of all elements of the project can help to reduce the duration of construction, and will allow companies to maintain sustainable activities in the construction industry.

Marine macroalgae have garnered significant attention in the field of cosmeceutical research due to their rich abundance of bioactive compounds. These compounds offer remarkable skin benefits without inducing any adverse effects on human health, such as cytotoxicity, reproductive toxicity, genotoxicity, mutagenicity, or carcinogenicity. Among the various bioactive compounds found in brown algae, phenolic compounds exhibit diverse chemical structures and are present in high concentrations. In addition to phenolic compounds, brown algae also contain terpenoids, bro-mophenols, mycosporine amino acids (MAAs), and flavonoids, with the well-studied poly-phenol compound, phlorotannin, being particularly prominent. Marine macroalgae further possess an array of pigments derived from their natural pigmentation, including chlorophylls, carotenoids (such as fucoxanthin and β-carotene), phycobiliproteins (such as phycoerythrin and phycocyanin), and melanin. These pigments have been extensively investigated for their potential cos-meceutical applications. The phenolic compounds and pigments derived from marine macroalgae have been thoroughly studied for their beneficial effects on the skin, including skin whitening, moisturizing, photoprotection, anti-aging, anti-wrinkle, anti-melanogenic, and anti-oxidant properties. This comprehensive review aims to explore the extraction, characterization, and skin cosmetic effects of phenolic compounds and pigments derived from marine macroalgae, as documented in the existing literature, thereby enhancing our understanding of their therapeutic potential.

In an increasingly resource-constrained era, the utilization approach of waste and by-products from grain processing, is attractive widely, considering both nutritive value and economic aspects and move towards more sustainable food systems. Following the fundamentals of a circular economy, the need of the hour lies in its effective utilization as a grain waste and by-products conversion into value-added products in food industry. The aim of this study is twofold: 1. Understanding the progress of grain waste and by-products to valorization in human nutrition, using bibliometrics; different literature databases namely Google Scholar, Web of Science and Elsevier Scopus have been evaluated for their merits and values; 2. Exploration of knowledge-based strategies, by reviewing the literature concerning the possible use of grain waste and by-products for food processing industry, reducing burden on virgin raw materials. The review allowed to unlock the latest-advances of upcycling side streams and waste from grain processing industry.

This article describes the Analytic Hierarchy Process (AHP) method which can be calculated by several methods. The AHP method is essential for the managerial decision-making to recognize which method is efficient for the calculation and to determine the proper order of criteria. In the article there are included methods that can be used in order to calculate the matrix in the AHP process for setting criteria such as Geometric mean, Arithmetic mean, Row sum of the adjusted the Saaty matrix, Reverse sums of the Saaty matrix columns and Row sums of the Saaty matrix. The paper is focused on the accuracy of the methods used. The results show that the most accurate method is the Saaty method, and the second most accurate method is the geometric mean in order to determine the ranking. This method is easier to use when the same order is achieved as in the Saaty method, followed by Geometric mean, which is favourable for fast and easy determination of alternatives using in the AHP process. The survey carried out among managers graduated from Universities and Colleges in Slovakia showed that the respondents considered the Saaty method as the most complex and also the most difficult method and the geometric mean average method the simplest method. 44% of respondents stated that they are capable to use a program to calculate the AHP. 46% of respondents said they had experience with some method related to the managerial decision-making process. 72% of managers regarded as important to manage some method for decision-making in their managerial position.

Primary and middle school teachers are a critical part of China’s foundational education; teacher turnover heavily affects the stable development of foundational education. In this study, interviews with 20 teachers found that relatively low income, high work pressure, unfair distribution, and difficulty in achieving promotion to higher professional titles are the main reasons for teacher turnover intention. This study investigates 485 primary and middle school teachers from Zhejiang and Jiangsu provinces. We found that primary and middle school teachers reported intense feelings of unfairness about their distribution of income. Their salary satisfaction was low, and the ratio of turnover intention was high. The main reasons for teachers’ high turnover intentions were low income, high pressure from work, unfair distribution, and the difficulty of achieving professional title promotion. To lower teachers’ turnover intentions, China should raise teachers’ income appropriately and increase the number of teachers with high professional titles. Schools should improve procedural, distributive, and interactive justice. Teachers should adjust their income references and perceptions of fairness. This situation can be effectively resolved only if all parties work hard to make positive changes.

: Nanotechnology options to road surface maintenance offers several advantages compared to traditionally used materials. The small particle sizer of hydrophobic Nano-Silane modified Nano-Polymers (NSNP) enables these nanotechnology products to deeply penetrate existing road surfaces, sealing micro-cracks and render surfacings to be water-resistant for extended periods of time. In comparison, traditionally used products contain minimum partial sizes of about 1 – 5 microns, that provide a superficial protection that wears off in a relatively short period of time. These traditional products are often associated with vehicle contamination while drying and requires the re-instatement of road markings. None of these disadvantages are associated with applicable NSNP technologies that are quick drying, with no vehicle contamination risks and is equivalent to a “clear-seal” requiring no reinstatement of road markings. In a similar vein, pot-hole repairs can be done using applicable, easy to use, pre-packed and treated pot-hole repair kits that are water-repellent and quick-drying at a fraction of the costs of conventional cold-mix products. Resurfacing using NME binder slurries can be done labour-intensively on a pre-treated NSNP surfacing, restoring cracked surfacing and providing a water-resistant long-lasting protective layer without the removal of existing cracked areas. The implementation of nanotechnology solutions for road surface maintenance operations is directly associated with ease of use, labour-intensive operations, prevention of considerable deterioration in riding quality due to removal and manual re-instatement of cracked surfaces, time and cost savings and a reduction in the risk of water damage to the sub-structure. TRANSLATE with x English ArabicHebrewPolish BulgarianHindiPortuguese CatalanHmong DawRomanian Chinese SimplifiedHungarianRussian Chinese TraditionalIndonesianSlovak CzechItalianSlovenian DanishJapaneseSpanish DutchKlingonSwedish EnglishKoreanThai EstonianLatvianTurkish FinnishLithuanianUkrainian FrenchMalayUrdu GermanMalteseVietnamese GreekNorwegianWelsh Haitian CreolePersian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal Back TRANSLATE with x English ArabicHebrewPolish BulgarianHindiPortuguese CatalanHmong DawRomanian Chinese SimplifiedHungarianRussian Chinese TraditionalIndonesianSlovak CzechItalianSlovenian DanishJapaneseSpanish DutchKlingonSwedish EnglishKoreanThai EstonianLatvianTurkish FinnishLithuanianUkrainian FrenchMalayUrdu GermanMalteseVietnamese GreekNorwegianWelsh Haitian CreolePersian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal Back

Twenty-four extensively-reared Iberian pigs were used to study the influence of fattening period length (30, 60 or 90 days) on the fatty acid profiles of intramuscular and subcutaneous fat and the relationships between both profiles. Regarding fatty acid (FA) percentage, PUFA was greater in backfat and MUFA was greater in intramuscular fat (IMF), regardless fattening period length. The longer fattening period increased MUFA content in backfat (which had a more marked change in oleic acid) and decreased PUFA content in backfat and IMF, but it did not affect SFA content. Within the 3-layers subcutaneous backfat, SFA content was greater in the inner layer, MUFA was greater in the outer layer and PUFA was greater in both of these layers. The few differences in FA composition between both adipose tissues suggest that the changes due to the feeding regime are slow and, therefore, although the length of the fattening phase was increased, the fatty acid profile did not change substantially. The strong relationship between the FA profiles of IMF and backfat might be used to predict one profile from the other one when this latter was more readily available for sampling or analytical reasons.

The food distribution process is responsible for significant quality loss in perishable products. However, preserving quality is costly and consumes a tremendous amount of energy. To tackle the challenge of minimizing transportation costs and CO2 emissions while also maximizing product freshness, a novel multi-objective model is proposed. The model integrates a vehicle routing problem with temperature, shelf life, and energy consumption prediction models, thereby enhancing its accuracy. Non-dominated sorting genetic algorithm II is adapted to solve the proposed model for the set of Solomon test data. The conflicting nature of these objectives and the sensitivity of the model to shelf life and shipping container temperature settings are analyzed. The results show that optimizing freshness objective degrade the cost and the emission objectives, and the distribution of perishable foods are sensible to the shelf life of the perishable foods and temperature settings inside the container.

The aim of this paper is to study changes in land use and the evolution of vegetation in Cacheu River Mangroves Natural Park in the Republic of Guinea-Bissau. To do this, we will study variations in the NDVI, Normalized Difference Vegetation Index. In order to perform the calculations and subsequent analysis, images from three years— 2010, and 2017—were used, all corresponding to the same time of year so that the phenological stage is the same. To perform a more reliable analysis, the park was divided into five classes based on the main use of the land: mangals, palm forest, paddy fields, savannahs and others. Using a statistical sample, same areas were selected for each class and the corresponding NDVIs were calculated for the years in which ASTER images were available. The study made it possible to conclude that at present, management of the park is not the most suitable, given that the changes in land use observed represent a decrease in mangrove swamps, despite the fact that these forests constitute the most important ecological area of all those that make up the park. Mangals are being replaced by other land uses.

Linking climate action with sustainable development goals (SDGs) might incentivize social and political support to forest conservation. However, further examination of the conceptual entry points for linking efforts for reducing forest-based emissions with those for delivering SDGs is required. This review paper aims to contribute to fulfilling this research need. It provides insights into the links between conserving forests for climate change mitigation and peacebuilding. Specifically, the paper examines opportunities to harness climate finance for conserving forests and achieving long-lasting peace. It does so via a literature review and the examination of the Orinoquia region of Colombia. Findings from the literature review suggest that harnessing climate finance for conserving forests and peacebuilding is, in theory, viable if activities are designed in accordance with social, institutional, and economic factors. Meanwhile, the Orinoquia region provides evidence that these two seemingly intractable problems are proposed to be solved together. At a time when efforts for reducing forest-based emissions are being designed and targeted at (post-) conflict areas in Colombia and elsewhere, the paper’s findings might demonstrate to government agencies — both environmental and non-environmental — the compatibility of programs aimed at reducing forest-based emissions with efforts relating to peacebuilding and sustainable food.

Small and medium enterprises (SMEs) are the biggest group of enterprises in the European Union (EU); they are also characteristic for emerging economies. Given this situation, there is a need to provide instruments such as processes, which allows them to realize a model of sustainable development. The ability to classify processes and occurrences happening inside these processes often affects the condition of the enterprises. The implementation of innovations, as identified process, enables the directions of SME development towards sustainable development. The purpose of this article is to find out if the identification of processes such as innovations, have any influence on the competitiveness and sustainable development of SMEs. This study was based on pilot research, which examined small and medium enterprises at the regional level, at the example of Polish emerging economy region. It was researched under the angle of the identification of processes and changes happening inside enterprises in terms of understanding the sustainable development concept. Research composition allows to present an understanding by the SMEs of the problems analyzed. The novelty was in the new questionnaire, the definition of sustainable development, and matching those processes identified by the enterprises analyzed with the particular sustainable development dimensions suggested by the authors. In light of the analysis of the literature and the results of this research the important contributions of this study are as follows. This approach pointed the understanding and practical meaning of the identification of processes to be understood. The most important finding was that there is a need to make entrepreneurs aware of the fact that innovations are also processes in themselves, which often constitutes the sum of other supporting processes occurring in the enterprise. Support in the form of knowledge transfer from experts to SMEs would also be recommended.

The Agricultural Policy/Environmental eXtender (APEX) model is widely used for evaluating agricultural conservation efforts and their effects on soil and water. A key component of APEX application in Korea is simulating water quality impacts of rice paddies because rice agriculture claims the largest cropland area in the country. In this study, a computational module called APEX-Paddy is developed to simulate water quality with considering pertinent paddy management practices such as puddling, flood irrigation management. Data collected at two experimental paddy sites in Korea were used to calibrate and validate the model. Results indicate that APEX-Paddy performs well in predicting runoff discharge rate and nitrogen yield while the original APEX highly overestimates runoff rates and nitrogen yields on large storm events. With APEX-Paddy, simulated and observed flow and mineral nitrogen yield (QN) are found to be highly correlated after calibration (Nash & Sutcliffe Efficiency (NSE) = 0.87 and Percent Bias (PBIAS) = −14.6% for flow; NSE = 0.68 and PBIAS = 2.1% for QN). Consequently, the APEX-Paddy showed a greater accuracy in flow and QN prediction than the original APEX modeling practice using the SCS-CN method.

Cropland area per capita and pressure index on cropland is the important parameters measuring the social vulnerability and sustainability in the perspective of food security in a certain region in China during the historical periods. This study reconstructs the spatial distribution change of cropland area per labor/household and pressure index on cropland during the 17th-20th century by the methods of historical documents, regression analysis, pressure index model and GIS. Then it analyzed the impacting process of climate change and sustainability of cropland use during the different periods. It draws conclusions: (i) the spatial difference of labor/household density was obvious which had the same pattern as cropland distribution during the same periods, which is higher density in three agricultural areas. (ii) Cropland area per capita was relatively higher during the 17th-18th century, which were above 0.4 ha/person in majority counties and distributed homogenously. Till the 19th century and the beginning of 20th century, cropland area per capita in large amount of regions decreased below 0.2 ha/person embodying the increase of social vulnerability and unsustainability at that time. (iii) Pressure index on cropland also showed the similar spatial pattern as cropland area per capita which presented lower threshold than nowadays. During the 17th-18th century there was no pressure on cropland. While, in the 19th century and at the beginning of 20th century, two high value centers of pressure index on cropland appeared in Middle Shandong and the Jiaodong region, pressure on sustainable cropland use increased obviously and a food crisis is probably created. (iv) Higher sustainable extent of cropland use corresponds to cold period, and lower sustainable extent of cropland use corresponds to warm period in Shandong over the past 300 years. The turning point of 1680s from dry to wet attributes to the decrease of sustainable extent of cropland use in Shandong not very distinctively. More and more pressure on sustainability of cropland use finally since the beginning of 20th century would intensify the social conflict and increase the probability of social revolts.

Buildings are responsible for approximately 40% of global energy consumption, putting pressure on the construction industry to mitigate its environmental impact. Therefore, there is an urgent need for innovative solutions to reduce power consumption, particularly in lighting systems. The study’s primary objective was to investigate novel integrated lighting solutions that significantly reduce energy use and they explore their enhancement through Building Information Modeling (BIM) and the Internet of Things (IoT) to further improve energy efficiency and reduce the carbon footprint in buildings. Hence, this literature review aimed to examine energy-saving actions, retrofitting practices and interventions across a range of multi-use buildings worldwide over the past six years. The objective was to diagnose the goals being undertaken and ultimately validate new actions and contributions to minimise energy consumption. First, daylight harvesting and retrofitting solutions were examined in conjunction with the latest technologies, also referred to the external shadings. In consequence of this matter, comes the lack or unappropriated coordination, and so waste of energy, between daylight and electrical lighting. Secondly, how the integration of BIM facilitates the design process, providing a complete overview of all the variables of the building, thus improving indoor daylight performance and proper lighting with energy analysis. Lastly, the review addresses the role of IoT in providing real-time data from sensor networks, allowing for continuous monitoring of building conditions. This systematic literature review explores the integration of the fields to address the urgent need for innovative strategies and sustainability in the built environment. Furthermore, it thoroughly analyses the current state of the art, identifying best practices, emerging trends and concrete insight for architects, engineers, and researchers. The goal is to promote the widespread adoption of low-carbon systems and encourage collaboration among industry professionals and researchers to advance sustainable building design.

Nigeria's upstream oil and gas sector is extensively contributing to the economic growth of the country, but the sector is plagued with challenges around corporate social responsibility (CSR) and taxation practices. Petroleum Industry Act (PIA) is introduced to tackle these challenges towards promoting sustainable development in Nigeria. The aim of this study is to explore the PIA’s provisions on CSR and taxation, identify the Act’s implementation challenges and improvement opportunities, propose an integrated framework for monitoring and evaluating the PIA’s impact on CSR and taxation over time, and recommend measures for enhancing PIA’s impact on CSR and taxation support for sustainable development in Nigeria's upstream oil and gas sector. This study adopts the qualitative desk review method to analyze existent literature, reports, and documents regarding PIA’s provisions on CSR and taxation. Findings reveal that the PIA’s provisions greatly emphasize CSR initiatives and taxation transparency in improving responsible ethical business behaviour. An integrated framework for monitoring and evaluating PIA’s impact over time is developed. This study concludes that the PIA's provisions can balance CSR and taxation practices for sustainable development. The study’s recommendations include using the integrated framework as a structured strategy for monitoring and evaluating the PIA’s impact. This study contributes to the discussion on the imperatives of ethical business practices and regulatory frameworks for sustainable development drive in the oil and gas sector.

Fault detection in PV arrays and inverters is critical for ensuring maximum efficiency and performance. Artificial intelligence (AI) learning can be used to quickly identify issues, resulting in a sustainable environment with reduced downtime and maintenance costs. As the use of solar energy systems continues to grow, the need for reliable and efficient fault detection and diagnosis techniques becomes more critical. This paper presents a novel approach for fault detection in photovoltaic (PV) arrays and inverters, combining AI techniques. It integrates Elman Neural Network (ENN), Boosted Tree Algorithms (BTA), Multi-layer Perceptron (MLP), and Gaussian Processes Regression (GPR) for enhanced accuracy and reliability in fault diagnosis. It leverages their strengths for accuracy and reliability of fault diagnosis. Feature engineering-based sensitivity analysis was utilized for feature extraction, the fault detection and diagnosis were assessed using several statistical criteria including PBAIS, MAE, NSE, RMSE, and MAPE. Two intelligent learning scenarios are carried out, the first scenario is done for PV array fault detection with DC power (DCP) as output. The second scenario is done for inverter fault detection with AC power (ACP) as the output. The proposed technique is capable of detecting faults in PV arrays and inverters, providing a reliable solution for enhancing the performance and reliability of solar energy systems. Real-world solar energy dataset is used to evaluate the proposed technique, with results compared to existing detection techniques and obtained results show that it outperforms existing fault detection techniques, achieving higher accuracy and better performance. The GPR-M4 optimization justified reliably among all the models with MAPE=0.0393, and MAE=0.002 for inverter fault detection and MAPE=0.091, and MAE=0.000 for PV array fault detection.

Nowadays, the high demand for healthy foods and sustainable products, has led the food industry to explore innovative food technologies, such as fortification with bioactive compounds like antioxidants and polyphenols, that may be sourced from herbs or by-products. The aim of the present study was to explore the enrichment of refined olive oils with natural bioactive compounds such as the herbs rosemary (salvia rosmarinus), basil (ocimum basil), sage (salvia officinalis), lemon balm (melissa oficinallis), st. john’s wort (hypericum perforatum), pink savory (Thymbra satureja), dittany (origanum dictamnus), and by-products such as pomace from olives, olive leaves (olea europaea tree), orange peel (citrus sinensis), lemon peel (citrus limon), pomegranate peel (punica granatum) and mandarin peel (citrus reticulate). The fortification of the refined olive oils was performed with the use of different methodologies such as Conventional maceration (CM), Incubation shaking maceration (ISM), and Ultrasound assisted maceration (UAM). Their phenolic content and antioxidant capacity were measured with Folin–Ciocalteu assay and Ferric Reducing Antioxidant Power (FRAP) assay respectively. All methods demonstrated that different parameters such as time of maceration, temperature and sample concentration, play an important role in the fortification process of the refined olive oils. The predicyed bioavailability of the antioxidant and phenolic compounds in the fortified oils was determined with in vitro digestion and ranged from 4.84% to 53.11%. Furthermore, the refined olive oils fortified with pomace, basil, st. john's wort, and pomegranate peel presented the highest antioxidant and phenolic predicted bioavailability indices during the in vitro process compared to the control refined olive oil. Finally, fortification with natural herbs or by-products can be considered an innovative method for the improvement of the nutritional value of refined olive oils.

While various studies have explored the integration of sustainability in the construction sector of Tanzania, particularly in areas like energy efficiency and green building practices, there remains a significant gap in understanding the specific barriers to the selection of sustainable building materials (SBMs) in residential projects. This research intends to bridge this gap by identifying and analyzing the critical barriers that hinder the effective selection of SBMs in Tanzania's residential building projects. By employing qualitative interviews with experts from regulatory bodies, public developers, and academic researchers, the study provides a comprehensive overview of the barriers. To ensure the collection of relevant and insightful data, the study involved the selection of participants based on specific criteria tailored to each category of experts. To be able to analyze qualitatively the data collected, this study employed Atlas.ti and MS Excel software. The findings revealed six categories of critical barriers affecting the selection of SBMs for residential building projects in Tanzania were identified and analyzed: (1) Regulatory and Policy Barriers (2) Financial Barriers (3) Knowledge and Awareness Barriers (4) Technical Barriers (5) Market and Supply Chain Issues (6) Cultural and Social Barriers. Moreover, the lack of awareness and limited knowledge issue were as equally importantly voiced as regulatory and policy barriers to affect the effective selection of sustainable materials in Tanzania. This study underscores the need for targeted policy interventions that address the lack of awareness, financial difficulties, and the absence of comprehensive regulatory frameworks to promote the selection of sustainable materials.

This study investigates the transformation of Bubungan Tinggi, a traditional Banjar house with a high roof, into a modern home through the integration of modern facade design with traditional Bubungan Tinggi facade elements. Bubungan Tinggi is a monumental artifact in South Kalimantan representing the collective memory of the Banjar community with its distinctive typology and anatomy. This study uses a qualitative approach with design experiments to explore the integration of smart home systems, eco-friendly materials, and contemporary design principles. The findings highlight the potential of blending traditional architecture with modern innovations to create sustainable, smart, and culturally sensitive housing solutions.

Across decades of contemporary discussion on sustainable development, a core debate has concerned the relationship between the economic, social, and environmental dimensions of sustainability. In recent years, a debate on economic growth versus degrowth has been going on discussing whether economic growth can be sustainable in environmental terms and whether economic degrowth can be sustainable in social terms. This conceptual and theoretical article has used the Sustainability Window, or ‘SuWi’ method, to theoretically determine the sustainable window of economies, as upper and lower bounds of future change in GDP, that could be deemed in line with environmental and social sustainability. All theoretically possible scenario paths of development are considered by combining the economic, environmental, and social dimensions, with the environmental and social productivities of GDP. In moving to sustainability analysis through SuWi it is noted that only four of the logically possible scenario paths could be considered theoretically 'sustainable’, and only if adhering to strict conditions. Two of the hypothesised scenarios involve economic growth and two of economic degrowth. The approach, including calculation formulas, has many potential uses in providing analysis and support to 21st century sustainability policymaking, including the United Nations Sustainable Development Goals.

This article addresses the urbanization model in valley bottom areas in the city of São Paulo, an-alyzed in its urban planning and socio-environmental aspects, and examines the hydrological impacts triggered by its implementation. It argues that sustainable occupation of urbanized hy-drographic basins should be based on environmental criteria in order to attain a sustainable water management regime that can ensure urban and environmental resilience. In the “Introduction,” the article emphasizes that urbanization in São Paulo has neglected the natural features of river basins, promoting the channeling of watercourses, which resulted in floods and inundations. “Theoretical Basics” brings in key concepts related to the environmental approach of drainage infrastructure with gray and green-blue systems. “Methods” details our qualitative research, bibliographical analyzes, referential case studies, and cartographical analyzes (geoprocessing), focusing on a case study in the Jaguaré creek basin. “Results” includes guidelines and recom-mendations for an urbanization model adjusted to valley bottom areas, applicable to new patterns of urban occupation or to the adjustment of existing patterns. “Discussion” explores the concept of “local sustainable self-development,” and “Conclusions” highlights the importance of an inte-grated, multisectoral, and sustainable planning, adjusted to the characteristics of river basins in valley bottom areas, promoting a socially responsible urban occupation, especially in the face of climate change.

Contract farming can reduce transaction costs and improve agricultural productivity. With the establishment of stable and effective contractual relationships, not only have agricultural products been provided with a stable market, but the standardization, refinement, and branding transformation of agricultural products can also be realized, thus further promoting the progress of agricultural modernization. The willingness of farmers to renew their contracts is a key factor in maintaining long-term, stable cooperative relationships. This research has empirically verified the impact model of tie strength between companies and farmers in contractual agriculture on the willingness of farmers to renew their contracts and revealed the working mechanism of tie strength on sustainable participation of farmers in contract farming. This study has utilized the survey data from 286 agricultural households in Inner Mongolia, China, and the method of structural equation modeling（SEM）, with the following results:(1)Interaction and reciprocity have a significant positive influence on trust. (2)Trust has a significant positive impact on farmers' willingness to renew their contracts. Also, reciprocity and interaction have an indirect impact on contract renewal willingness through trust .(3)Perception of economic value can significantly increase the contract renewal willingness of farmers and plays a mediating role between trust and contract renewal willingness.Overall, on the basis of tie strength, this research has provided a new perspective for the investigation of the sustainable stability of contract farming and empirical evidence for the sustainable development of the contract farming supply chain.

Efficient traffic systems control in large cities with complex traffic management of signalized intersections is a challenging task, particularly when dealing with high traffic volumes. The city of Zagreb faces this challenge, as all administrative and governmental institutions are located in the old city centre, and routes for escorted vehicles have a significant impact on the traffic network. This paper addresses the issue of the impact of unconditional priority for escorted vehicles on the energy efficiency of the urban traffic network in the city of Zagreb. The traffic network model is developed by using the PTV Vissim microsimulation software. The evaluation was conducted with node (delay, queue length, number of stops) and network evaluation parameters (CO2 emission, NOx emission, PM10 emission, and fuel consumption). The results show that unconditional priority has minimal impact on energy consumption and exhaust emission in the observed scenario. This is a significant result considering all actions that have to be done to manage the passage of the escorted vehicles through the traffic network.

Undergraduate learning is a multifaceted concept that many researchers have investigated to promote student engagement, academic performance, etc. Exploring factors promoting learning among undergraduates in FYW programs, which are required for undergraduates might potentially contribute to sustainable, cross-disciplinary undergraduate education. This study used the 10-year longitudinal grade and survey data at San José State University (SJSU) and the data was collected from Academic Years (AYs) 2015 to 2020, and five student surveys constituted the sample size of 18,101 students. In 2016, SJSU changed the remedial writing course to college writing courses. Since then, students need to complete an online module course before placing themselves into a one-semester or two-semester writing course. The previous study showed that students with higher writing comfort and confidence tend to place themselves into a semester-long class. Regression analysis was applied to examine the relationships among factors promoting learning among those students. University admitted students from various diversity and backgrounds, the results of this study suggested that what students chose and persisted in were more important in advancing their academic success rather than prior learning experience or psychological factors before the class.

Nowadays, higher education students play an active role in the realization of sustainable development goals (SDGs) for global citizenship. However, some important issues such as how much students know about these goals can play a role in achieving these goals are not yet clear. The aim of this study is to establish a fundamental study for determining the level of knowledge on the higher education students about SDGs. An open-ended questionnaire was conducted with the qualitative research methods on 54 higher education students after pandemic of COVID-19. As a result of the research, the goals of quality education, gender equality, health and quality of life, reduction of inequalities and peace, justice and strong institutions are the most frequently mentioned by the students. In addition, the opinions of the students on the subject of “sustainable cities and communities” are sequentially; the themes include ensuring socio-economic development, preserving cultural heritage identity, safe environment and durable buildings, as well as modern irrigation and waste methods, and reducing air pollution. On the other hand, they agreed on the need for global citizenship to have universal qualifications. In conclusion, global citizenship contributes directly to the SDGs and human-oriented production should be given more importance.

FeZnNa@SiO2-C catalyst with graphitized carbon (GC) modified mesoporous SiO2 support metal nanoparticles was prepared by sol-gel method. The effect of adding metal Na and Zn promoters as a dispersion on the CO2 hydrogenation to low olefins was systematically studied. The results showed that Zn-Na, as a combination, promoted the absorption of CO2 and improved the conversion rate of CO2. Na as an alkaline substance can improve the absorption of more acidic CO2, improving the conversion rate of CO2 to 59.03%. Meanwhiles, addition of secondary metal Zn into Fe-based catalysts to form a surface alloy could alter the adsorption of CO2 and the activation of C-O bonds, inhibit the subsequent hydrogenation of olefins to paraffins, facilitate the reduction of Fe2O3 and the formation of active Fe5C2 species. From TEM and XRD, the formation of active Fe5C2 species was found, the selectivity of the target product was 41.07%. The deep hydrogenation of olefins is inhibited, by inhibiting their deep hydrogenations, the STY of C2=-C4= was raised again, up to 0.0436. However, the corresponding STY does not increase infinitely with the increase of Na content, and when the Na content to 6.4%, which can be shown higher CO2 hydrogenation catalytic performance. Compared with Fe@SiO2-C catalyst, Na and Zn promoted Fe-based catalysts prepared by modified sol-gel method, can be used directly for highly efficient CO2 hydrogenation to low olefins and thus will be more promising in the future.

Voice search technology has gained popularity in recent years, transforming the way individuals interact with digital devices. This study aims to explore the sustainable use intention of voice search, focusing on the psychological factors that influence new technology adoption. Using the Technology Acceptance Model (TAM) and anthropomorphism theory, it provides insights for developers, marketers, and policymakers interested in voice search technology. Through an online survey targeting experienced voice search users in the U.S., the study examines the impact of TAM factors (perceived usefulness, ease of use, quality satisfaction) and anthropomorphism traits (narcissism, Machiavellianism) on sustainable use intention of voice search. Results from hierarchical regression analysis show that perceived usefulness, ease of use, and quality satisfaction positively affect sustainable intention of voice search. Additionally, narcissism and Machiavellianism predict sustainable intention of voice search. By merging TAM and anthropomorphism theory, this study enhances our understanding of voice search behavior and technology adoption.

Most of the literature on the optimization problem of transportation in supply chain networks (SCN) considered fixed costs (FC). However, in the practical applications of this problem it is important to study the effect of FC. This paper examines the impact of fixed cost increase as well as the variable cost on the optimization of a Two-Stage SCN. To do so, two mathematical models for mixed-integer nonlinear programming are developed. The first model optimizes fixed and variable costs in addition to the opening cost, whereas the second model only optimizes variable and opening costs. To evaluate the effect of considering FC on the optimization supply chain problem, four groups of instances are randomly generated, and solved using Lingo. The results of the two models are compared utilizing the average percentage deviation. In addition, sensitivity analysis is performed to determine the impact of changes in opening and variable costs on the considered optimization problem. The computational results and the sensitivity analysis show that the first model with minimized FC outperforms the second model, which does not consider the FC in minimization and FC affect the optimization.

For the first time in human history the majority of people no longer live in a rural environment. According to the United Nations, over 50% of the global population now lives in cities. The abandonment of the rural environment has grave consequences for society in general, as these areas are healthier places to live, produce the food we all depend on, and are an important factor for preserving biodiversity and environmental sustainability. In this paper we will provide a historical overview of rural repopulation models and analyse a number of models currently being applied in several countries in Europe and Latin America. We will also offer observations on a pilot repopulation project called “Habita Tierra” currently being developed. The common characteristics of different repopulation models prompted us to develop a model based on active listening and accompaniment of people and local agents as well as other important factors. Rural depopulation in Spain involves a number of interrelated problems, one of the most salient being the aging rural population. The average farmer in Spain is 61 years of age. There is also the problem of gender imbalance in rural areas, where women enjoy few opportunities or alternatives. In turn, low fertility rates, increasing stress on limited public healthcare, education and transpor-tation resources, a lack of cultural activities and poor connectivity are also factors driving rural depopulation. The only group which is increasing the rural areas in Spain are immigrants, who now account for 10% of the rural population, often performing the agricultural, fishing and livestock farming ac-tivities abandoned by native residents. This group, along with young people, and women of all ages and the programs which support them may offer a solution to the challenge of depopulation. The paper concludes with a list of the key features of successful repopulation programs, drawn from a comparison of historic and contemporary models.

The purpose of this research was to examine the act of business schools in the Palestinian universities by their study plans in achieving sustainable development goals (SDGs) (G1, G4, G8, G9, G12, G16, G17), due to their strong relationship with business sector in the local market, in addition to examining whether the graduates of business schools have the required competencies and required skills for the local market. This research is descriptive in nature and a survey questionnaire was designed to collect data from faculty members and employers. The results indicate that business schools in the Palestinian universities have incorporated sustainable development goals in their study plans to a medium-to-high degree, with a higher emphasis on Quality Education. Graduates from these programs are perceived to possess the required competencies and skills by the employers in the local market, with a medium-to-high level of alignment with the SDGs, especially in the area Quality Education. There was no significant difference between the perceptions of university faculty members and employers in the local market regarding the fit of business school graduates' competencies and skills with the local market needs in relation to the SDGs. However, there were significant differences in the areas of accountability and transparency principles, economic and industrial challenges, partnerships for the goals, international standardization, and capacity building in operational expertise. It is recommended that business schools in Palestinian universities continue to prioritize the integration of sustainable development goals in their study plans and align the competencies and skills of their graduates with the needs of the local market. The areas of significant difference between university faculty members and employers in the local market present opportunities for further collaboration and dialogue to better meet the needs of the local market and achieve sustainable development goals.

Aquifer water is the key staple to develop successful sustainable agricultural activity in newly reclaimed areas in Egypt. Monitoring irrigation water quality is necessary for a proper planning of this exhaustible resources. This work aims to evaluate the groundwater quality in the western newly reclaimed areas of Beni-Suef governorate. Fifty aquifer water sample were collected from wells scattered in the arid western Beni-Suef fringes during May of 2022. Water chemical analyses were conducted to estimate the parameters of Irrigation Water Quality Index (IWQI) namely the Electrical Conductivity (EC), Sodium (Na+), Chloride (Cl-), Bicarbonate (HCO3-) and the Adjusted percentage of Absorbed Sodium (SARo). The Inverse Distance Weighted (IDW) technique used to map the spatial distribution of aquifer water chemical characteristics and IWQI. The results showed that EC values were high in the south of the study area and decreased at its north and east borders. The results showed that the average of dissolved cations and anions were 236.4, 102, 77.5, 106.2, 309.6, 148.1 and 113 meq/l for Ca2+, Mg2+, Na+, K+, SO42-, HCO3-, and Cl-, respectively. Regarding to IWQI, its' values ranged from 28 to 81. Two-thirds of the study area classified as having moderate limitations for sustainable irrigation purposes. Furthermore, one-thirds of the area classified as having high restrictions.

Concept sustainable of banking is based on principle realization growth and profit for the bank and shareholders, but only with achievement social goals, as and care for conservation life environment. Providing new ones banking service and creation new ( green ) banking jobs, except for _ profitable, they achieve and spreads social and ecological goals, chances are with creation competitive advantages, both in countries Western Balkans observed in the work, so and in all countries of the world In this one work we will focus on analysis macroeconomic parameters in countries Western Balkans works tests influence selected indicators on performance banking system, with special in retrospect on social and component protection life environment. The results indicate that rate unemployment the most significant indicator potentially risky events for bankers, as and banks they are not recognized in national conservation strategies _ life environment which are in WB countries currently on strength. Accordingly, the former is necessary to carry out education foreign affairs, and in parallel to promote green loans like they live and in the long term more favorable of traditional loans, with update the existing one regulatory frame in the domain protection life environment.

Many countries have implemented free early childhood education to solve the affordability and accessibility problems without considering the sustainability of policy; thus, they have to discontinue the policy. The city of Nanjing, China, is no exception. This case study adopted a mixed-methods approach to understanding how and why the policy was formulated, implemented, and failed in the city, using the “policy cycle” framework. Altogether 232 kindergarten principals and teaching/research staff were randomly sampled and surveyed, and 5 kindergarten principals and 5 teaching/researcher staff were interviewed. The results indicated that there were many obstacles to the policy’s sustainability, including the conflict of interest, the inefficient policy implementation, the insufficient funding, and more social inequality issues. And the policymakers made mistakes in the five domains of the policy cycle: the context of influence, the context of policy text production, the context of practice, the context of outcomes, and the context of political strategy. Finally, the lessons for a more sustainable policy decision process are discussed.

This study aimed to analyze the competitive relationship among meetings, incentive, convention and exhibition (MICE) destinations with reference to the notion of niche businesses in New Zealand; and to explore the existence of cooperative strategies between neighboring destinations. The data were collected from Ministry of Business, Innovation and Employment Reports on the Convention Activity Survey (CAS) in New Zealand. The study contributes towards an innovative and better understanding of the dynamics of sustainable destination competitiveness. It broadens the scope of MICE industry research by exploring new insights on the notion of destination competition and makes a theoretical connection between niche theory and the importance of coopetition. By investigating the case of MICE destinations of four northern central islands in New Zealand, this study provides information on the strategic significance of niche marketing for global destinations preparing for entrance into this market.

Social Economy institutions seek to provide answers to social problems, given that they naturally have a socially responsible mission. This study aims to answer the research question: how sustainable practices, namely environmental behaviour, have been adopted by Portuguese Private Social Solidarity Institutions (IPSS) with the purpose of contributing to Sustainable Development? To achieve this objective, qualitative research was carried out in 31 IPSS, which was framed within the scope of the TFA project (Theoretical framework for promotion of accountability in the social economy sector: the IPSS case). Semi-structured interviews were conducted, with a script based on the literature review, from May to July 2019, with those responsible for the management of these entities. A content analysis was conducted, using the NVivo12 Version 12.6.0 software, which enables data to be coded and categorised, reducing any researcher bias. The results indicate that most entities carry out activities of an environmental nature, related to the reuse of materials, the recycling of waste, the sale of materials for recycling, and user awareness. Several entities expressed financial limitations to the implementation of Environmental Management Systems and their accomplishment. However, the objections presented are not impossible to overcome, according to studies presented in other countries.

Unmanned aerial vehicles (UAVs)-based communication system is a promising solution to meet coverage and capacity requirements of future wireless networks. However, UAV-enabled communications is constrained with its coverage, energy consumption, and flying regulations, and the number of works focusing on the sustainability aspect of UAV-assisted networking has been limited in the literature so far. In this paper, we propose a solution to this limitation; particularly, we design a $Q$-learning-based UAV positioning scheme for sustainable wireless connectivity considering key constraints, that are, altitude regulations, non-flight zones, and transmit power. The objective is to find the optimal position of the UAV base station (BS) and minimize the energy consumption while maximizing the number of users covered. Moreover, a weighting mechanism is developed, where the energy consumption and number of users covered can be prioritized according to network/battery conditions. The proposed Q-learning-based solution is compared to the baseline k-means clustering method, where the UAV BS is positioned at the centroid location that minimizes the cumulative distance between the UAV BS and the users. The results demonstrate that the proposed solution outperforms the baseline k-means clustering-based method in terms of the number of users covered while achieving the desired minimization of the energy consumption.

Various colors of clothing originating from synthetic dyes are presently causing serious environmental pollution problems, whereas natural dyes extracted from natural indigo plants help reduce the harm to the environment and extend the sustainable use of clothing. This study focuses on the relation between indigo dyeing colors and the environment on the basis of sustainable design. The results reveal that light colors are considered to conform to the sustainable spirit more than dark colors in different indigo colors. In fact, the recyclable light-colored indigo dyeing t-shirt is beneficial in its reuse. Indigo dyeing fabric can be decomposed by a variety of microorganisms; however, the light-colored indigo dyeing takes a short time. Light colored indigo dyeing is more resource-saving when considering dye, water and electricity costs. The results of colors and environmental protection provide scheme references to consumers or industry for clothing collocation of different indigo dyeing colors for a series of blue clothing and carry out the ideal of the sustainability and co-existence between clothing and natural resources.

The issue of sustainability has long been the subject of interest of the architecture engineering and construction sector. All three aspects of sustainability - economic, environmental and social - can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Researches have shown that one of the main barriers to insufficiency CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of the EU's environmental priorities. Aim of the article is to confirm the economic potential of construction and demolition waste audit processing through case study. A pre-demolition waste audit has been processed for unused building of shopping center in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which will also increase the sustainability of construction projects. In addition, the cost parameters of selected waste disposal methods could be another dimension of building information modelling.

Climate change has become the greatest threat to the survival of world and its ecosystem. With the irreversible impact on the ecosystem, problems like rise in sea level, food-insecurity, natural resources scarcity, seasonal disorders have increased over the past few years. Among these problems, the issue of water scarcity due to the lack of water resources and global warming has plagued several nations. Owing to the rising concerns over water scarcity United Nations (UN) has acknowledged water as a primary resource to the development of societies under the ‘Water Goal’ of the sustainable development goals. As the changing climate and intermittent availability of water resources pose major challenges to forecast demand, especially in countries like the United Arab Emirates (UAE) which has one of the highest per capita residential water consumption rates in the world. Therefore, the aim of this study is to propose an accurate water demand forecasting technique that incorporates all significant factors to predict the future water demands of the UAE. The forecasting model used is the Long Short Term Memory (LSTM), with the factors considered are mean temperature, mean rainfall, relative humidity, Gross Domestic Product (GDP), Consumer Price Index (CPI) and population growth. The LSTM model predicts the water demand forecasting in the UAE showing that the future demand will decrease from 1821 million m3 in 2018 to 1809.9 million m3 in 2027.

As we embrace the new normal in the aftermath of Covid-19, the year 2020 also marks the decade of action as we start the 10-year countdown to achieving the Sustainable Development Goals (SDGs) by 2030. In this paper, we attempt to explore the extent to which the hardly won development gains over the last years could be reversed due to the unfolding COVID-19 global pandemic, how do we reboot the global response to accelerate the SDGs in times of uncertainties, and most importantly how to turn the recovery into an opportunity to build back better and more resilient economies. To do so, we examine the case of blockchain as one of the emerging innovative work-streams in development practices that could lead the way forward and pave the path for new developmental narratives as we all navigate the uncharted territories of the new digital age.

The aim of this research is forwarded for assessment of provision possibilities of the multi-componential and heterogeneous services in the fast-changing topology of cargo transportation processes. The mobile intelligent services in nowadays transport means require the development of complex infrastructure for multi-compositional service support. Our objectives are related to the investigation in data-transfer capabilities for heterogeneous service support, by offering some improvements for developing the infrastructure of transportation of vehicles by helping in the administration of transport processes. This research aims to develop an approach for assessment of infrastructure for sustainable management of cargo transportation processes by roads. Such assessment is multi-layered by including the management possibilities of cargo transportation logistic processes and electronic (smart, mobile) services by implementing of nowadays innovative software and hardware of information communication technologies (ICT). Special attention is paid for road safety, more environment cleanable, and paperless management by assessing the integration of potentials and prospects of wireless, vehicle Ad-hoc communication networks (VANET), and other communication possibilities. Some requirements are revealed for such type of infrastructure for the provision of heterogeneous services. The results of the development of infrastructure demonstrate the capacities of the potential of wireless networks for the provision of high-level of multi-component, heterogeneous services.

Climate change and environmental degradation are major threats to sustainable agricultural development in Southern Africa. Thus, the concept of sustainable intensification (SI) i.e. getting more output from less input using certain practices such as agroforestry, organic fertilizer, sustainable water management etc. has become an important topic among researchers and policy makers in the region in the last three decades. A comprehensive review of literatures on the adoption of SI in the region identify nine relevant drivers of adoption of SI among (smallholder) farmers. These drivers include (i) age, (ii) size of arable land, (iii) education, (iv) extension services, (v) gender, (vi) household size, (vii) income, (viii) membership in farming organization and (ix) access to credit. We present the results of a meta-analysis of 21 papers on the impact of these determinants on SI adoption among (smallholder) farmers in Southern African Development Community (SADC) using random-effects estimation techniques for the true effect size. While our result suggests that variables such as extension services, education, age, and household size may influence the adoption of SI in SADC, factors such as access to credit is also of great importance. Decision-makers should therefore concentrate efforts on these factors in promoting SI across the SADC. This includes increasing the efficiency of public extension service as well as involvement of private sector in extension service. Furthermore, both public and private agriculture financing models should consider sustainability indicators in their assessment process.

The megacities´ sewage creates socioeconomic dependence related to water availability in the nearby zones, especially in countries with hydric stress. The present paper studies the water balance progression of realistic scenarios from 2005 to 2050 in the Mezquital Valley, the receptor of Mexico City untreated sewage since 1886, allowing agriculture irrigation in unsustainable conditions. WEAP model calculated the water demand and supply. Validation was performed with outflows data of the Tula River and simulated three scenarios: 1st) Steady-state based on inertial growth rates, 2nd) Transient scenario concerned climate change outcomes, with minor influence in surface water and hydric stress in 2050; 3rd) Transient scenario perturbed with a planned reduction of 36% in the imported wastewater and the start-up of a massive Water Treatment Plant, allowing drip and sprinkler irrigation since 2030. In the 2005-2017 period, 59% of the agriculture depended on the flood irrigation with megacity sewage. The water balance scenarios evaluated the sectorial supply of the ground and superficial water. Drip irrigation would reduce 42% of agriculture demands, but still does not grant the downflow hydroelectric requirements, aggravated by the lack of wastewater supply since 2030. This research alerts about how present policies compromise future Valley demands.

The foreign trade sustainable development index system of Shenzhen City, including the three subsystems of environment, economy, and society, was constructed based on the theory of emergy analysis.The sustainable development of foreign trade in Shenzhen City from 2009 to 2016 was evaluated, and a detailed analysis of changes in the emergy of light and heavy industries was performed. The results showed that the scale of economy has been expanding, and the total volume of imports and exports has turned from a rise to a decline in 2013. The status of sustainable development is not optimistic. The transaction volume of energy is reduced, and the quality of people's living environment is declining. The sustainable development of Shenzhen City is not perfect, but it is in a phase of gradual optimization. Moreover, the proportion of heavy industry in import and export trade is significantly higher than that of light industry, which has caused the outflow of energy to a certain extent. Therefore, to improve the level of foreign trade sustainable development, we must improve the efficiency of resource utilization, increase the import of energy products, strengthen the ability to cope with external interference and adjust the foreign trade industrial structure.

There is much discussion regarding the Sustainable Development Goals’ (SDGs) capacity to promote inclusive development. While some argue that they represent an opportunity for goal-led alignment of stakeholders and evidence-based decision-making, other voices express concerns as they perceive them as a techno-managerial framework that measures development according to quantitatively defined parameters and does not allow for local variation. We argue that the extent to which the positive or negative aspects of the SDGs prevail depends on the monitoring system’s ability to account for multiple and intersecting inequalities. The need for sub-nationally (urban) representative indicators poses an additional methodological challenge – especially in cities with intra-urban inequalities related to socio-spatial variations across neighbourhoods. This paper investigates the extent to which the SDG indicators’ representativeness could be affected by inequalities. It does so by proposing a conceptual framing for understanding the relation between inequalities and SDG monitoring, which is then applied to analyse the current methodological proposals for the indicator framework of the “urban SDG”, Goal 11. The outcome is a call for 1) a more explicit attention to intra-urban inequalities, 2) the development of a methodological approach to “recalibrate” the city-level indicators to account for the degree of intra-urban inequalities, and 3) an alignment between methodologies and data practices applied for monitoring SDG 11 and the extent of the underlying inequalities within the city. This would enable an informed decision regarding the trade-off in indicator representativeness between conventional data sources, such as censuses and household surveys, and emerging methods, such as participatory geospatial methods and citizen-generated data practices.

The current urban environment is faced with the potential threat of frequent natural disasters, and the sustainable development of post-disaster community has become a global issue. As an intrinsic motivation influencing the social interaction and capital operation of community, social network is an important mechanism promoting such sustainable development. However, the difference in social network caused by different member structure, spatial arrangement and management mechanism of post-disaster communities in different reconstruction modes has influenced such sustainable development process. Therefore, reasonable selection of reconstruction mode is crucial. This paper applied analytic hierarchy process to comprehensively measure and compare the social network strength in post-disaster communities in the four reconstruction modes adopted by the government of China, i.e. unified planning and unified construction, unified planning and independent construction, in situ reconstruction and relocation resettlement, with communities after the 2008 Sichuan earthquake in Chengdu, China as study objects from the perspective of three social relations (the relations between residents and residents, residents and managers, and residents and servers). The results showed that strong connections are generally presented in the social network of post-disaster communities in unified planning modes, that the strength is significantly higher than that of those in non-unified planning modes, and that the strength of UPIC communities is the highest. Meanwhile, government intervention, residents’ free participation and market operation are positively correlated to government trust, community interaction and community service respectively. The positive impact of government intervention is the most significant, but it has a peak value. No government management and excessive government intervention will exert negative impacts. The coordination of government, society and market is the key contents of post-disaster community reconstruction. The reconstruction modes based on “government leadership, resident participation and market operation” may become a feasible path for such sustainable development.