Voltage sags can cause the interruption of power supply and can negatively affect operations of customers. In this paper, the authors study the impact of battery energy storage systems (BESS) on voltage sags. A stochastic method of fault positions is used. Faults of various types are simulated and voltages are recorded. Firstly, with the BESS integrated into the network, there are higher residual voltages, fewer voltage sags and less expected critical voltage loss. Secondly, if the BESS converter power factor is reduced, recorded residual voltages are higher, voltage sags are fewer, and the number of expected critical voltage sags is lower. Finally, when three BESS converter control modes, namely constant voltage, constant power factor, and constant reactive power, were assessed, results showed similar voltage sag performances for constant power factor and constant reactive power modes. Furthermore, operating in constant voltage control outperformed the other two modes as it resulted in higher residual voltages, a lower number of voltage sags, and fewer expected critical voltage sags. The paper has demonstrated that the BESS can improve voltage sag performance. In addition, the power factor of the BESS converter and the mode of operation of the converter can influence the magnitude of the voltage sag performance improvement.

Battery electric vehicles provide an opportunity to balance supply and demand in future power systems with high shares of fluctuating renewable energy. Compared to other storage systems such as pumped-storage hydroelectricity, electric vehicle energy demand is highly dependent on charging and connection choices of vehicle users. We present a model framework of a utility-based stock and flow model, a utility-based microsimulation of charging decisions, and an energy system model including respective interfaces to assess how the representation of battery electric vehicle charging affects energy system optimization results. We then apply the framework to a scenario study for controlled charging of nine million electric vehicles in Germany in 2030. Assuming a respective fleet power demand of 27 TWh, we analyze the difference between power-system-based and vehicle user-based charging decisions in two respective scenarios. Our results show that taking into account vehicle users’ charging and connection decisions significantly decreases the load shifting potential of controlled charging. The analysis of marginal values of equations and variables of the optimization problem yields valuable insights on the importance of specific constraints and optimization variables. In particular, state-of-charge assumptions and representing fast charging drive curtailment of renewable energy feed-in and required gas power plant flexibility. A detailed representation of fleet charge connection is less important. Peak load can be significantly reduced by 5% and 3% in both scenarios, respectively. Shifted load is very robust across sensitivity analyses while other model results such as curtailment are more sensitive to factors such as underlying data years. Analyzing the importance of increased BEV fleet battery availability for power systems with different weather and electricity demand characteristics should be further scrutinized.

A new circuit model of the self-powered device for heart rate measurement is presented in this paper. This device consists of piezoelectric energy harvester (PEH), power management circuit (PMC) with energy storage, microcontroller, Photoplethysmography (PPG) sensor, and Wi-Fi module. The PEH is placed under the insole to harvest the pressure energy from human foot-step to generate ac power. In our model, a PEH is represented by sine voltage source, where its parameters were taken from experiments with 20 volunteers. The PMC is simplified by a switch with gain δ placed in series with the main circuit. The model of the main circuit is RC elements in parallel, where C is the capacitance of the storage device, and R is the equivalent parallel resistance of the microcontroller, PPG sensor, and Wi-Fi modules, respectively. The value of R depends on the power and current absorbed by those modules during sleep, deep sleep, sense, and transmit modes which collected from the datasheet. Finally, the proposed circuit model of the self-powered device was built and simulated in SPICE. The simulation results were compared with the laboratory experiment using commercial devices. Based on the results, the proposed model had small gaps compared to the real self-powered devices in terms of average current, voltage, power and efficiency.

Agricultural greenhouse is largely answered in the agricultural sphere, despite the shortcomings it has, including overheating during the day and night cooling which sometimes results in the thermal inversion mainly due to its low inertia. The glasshouse dressed chapel is relatively more efficient than the conventional tunnel greenhouse. Its proliferation on the ground is more or less timid because of its relatively high cost[14-22]. Agricultural greenhouse aims to create a favorable microclimate to the requirements of growth and development of culture, from the surrounding weather conditions, produce according to the cropping calendars fruits, vegetables and flower species out of season and widely available along the year. It is defined by its structural and functional architecture, the quality thermal, mechanical and optical of its wall, with its sealing level and the technical and technological accompanying[12-13]. The greenhouse is a very confined environment, where multiple components are exchanged between key stakeholders and them factors are light, temperature and relative humidity[8]. This state of thermal evolution is the level sealing of the cover of its physical characteristics to be transparent to solar, absorbent and reflective of infrared radiation emitted by the enclosure where the solar radiation trapping effect otherwise called "greenhouse effect" and its technical and technological means of air that accompany. The socio-economic analysis of populations in the world leaves appear especially the last two decades of rapid and profound transformations These changes are accompanied by changes in eating habits, mainly characterized by rising consumption spread along the year[14]. To effectively meet this demand, greenhouse-systems have evolved, particularly towards greater control of production conditions (climate, irrigation, ventilation techniques, CO2 supply, etc ...). Technological progress has allowed the development of greenhouses so that they become increasingly sophisticated and of an industrial nature (heating, air conditioning, control, computer, regulation, etc ...). New climate driving techniques have emerged, including the use of control devices from the classic to the use of artificial intelligence[10-11] such as neural networks and / or fuzzy logic, etc... As a result, the greenhouse growers prefer these new technologies while optimizing the investment in the field to effectively meet the supply and demand of these fresh products cheaply and widely available throughout the year.

Urban areas are increasingly challenged by the urban heat island effect, resulting in increased energy consumption and reduced efficiency of conventional air source heat pumps (ASHPs). This study explores the integration of ground source heat pump (GSHP) systems with energy piles in urban environments, focusing on small to medium sized residential units. Energy piles combine structural support with geothermal heat exchange capabilities, taking advantage of stable ground temperatures to improve energy efficiency. The research examines key design considerations such as soil thermal properties, heat transfer mechanisms, and the optimal configuration of heat exchangers within the piles. Results indicate that GSHP systems can significantly reduce electricity consumption and operating costs compared to ASHPs, despite higher initial costs. Several factors, including site conditions, pile materials, and heat exchanger designs, are critical to system performance. The study concludes that while GSHP systems offer significant long-term benefits, their widespread adoption in Southeast Asia will require further development of construction methods and design strategies, as well as supportive government policies to mitigate initial costs. This work aims to advance the understanding and implementation of energy piles in urban environments, thereby promoting sustainable energy use in smart city development.

The scale of China's floating population is very large, and it is a key group that needs attention in promoting the equalization of basic public services. This study explores the impact and mechanism of adjusting the urban household registration threshold on the acquisition of citizenship status by the "rural-urban" floating population, with the household registration threshold as the link. It was found that the threshold for household registration has an impact on the willingness of rural urban migrant population to settle down from two aspects. On the one hand, a high threshold for household registration implies the unaffordability of obtaining citizenship status for the "rural-urban" migrant population, which has a significant crowding out effect on their willingness to settle down. Moreover, the high skilled "rural-urban" migrant population without housing is more sensitive to the high threshold for household registration. On the other hand, from the perspective of urban scale, the increase in the threshold for household registration has had a crowding out effect on the floating population for Type I large cities, mega cities, and super large cities. The increase in the threshold for settling in mega cities has the strongest crowding out effect on the floating population, which means that as the urban population expands, the welfare benefits enjoyed by the floating population in these cities will decrease, leading them to be more inclined to leave these cities and seek development opportunities in other cities. This study effectively answers how the threshold for household registration affects the willingness of rural urban migrant population to settle, providing mathematical support for urban development.

Robotic systems are crucial in modern manufacturing. Complex assembly tasks require the collaboration of multiple robots. Their orchestration is challenging due to tight tolerances and precision requirements. In this work we set up two Franka Panda robots performing a peg-in-hole insertion task. We structure the control system hierarchically, planning the robots’s trajectories feedback-based with a central policy trained with reinforcement learning. These trajectories are executed by a low-level impedance controller on each robot. To enhance training convergence, we use reverse curriculum learning incorporating domain randomization, varying initial configurations of the task. After training, we test the system in a simulation, studying the impact of curriculum parameters on emerging process characteristics like process time and variance. Finally, we transfer the trained model to a real-world setup, comparing results with simulation as well as classical path planning and control approaches.

This study examines the integration of Environmental, Social, and Governance (ESG) factors into global banking practices and their impact on financial stability, measured by the Bank to Capital Asset Ratio. Through a comprehensive literature review and data analysis, the paper highlights the dual role of banks as catalysts for ESG investment and risk managers. It discusses the challenges and opportunities in transitioning to ESG-aligned business models, emphasizing the importance of regulatory frameworks and risk management approaches. The findings suggest that ESG integration enhances bank stability and competitiveness, contributing to sustainable economic development. The paper concludes with policy implications and recommendations for further integration of ESG factors into banking governance.

This study investigated the influence of Teacher Availability -TAV (Number of Available Teachers, Teacher Punctuality -TP, Teacher Promptness to Class -TPC) on Student Academic Achievement (SAA) in Public Senior Secondary Schools (PSSS) in Southwestern Nigeria. The descriptive survey research design of correlational type was adopted while the multi-stage sampling procedure was used in the study. A simple random sampling technique was used to select three (Oyo, Ogun, and Ekiti) states out of the six in Southwestern Nigeria, as well as one Senatorial District (SD) from each state. The proportionate-to-size sampling technique was used to select 40% of the Local Government Areas (LGAs) in each SD and 50% (101) of the schools in the sampled LGAs. A class of 3,030 PSSS II was used; 202 Mathematics and English Language teachers and 202 Heads of Department (101 each from Science and Arts) were purposively sampled, while 101 school administrators were enumerated. The instruments were TP ( =0.75); TPC ( =0.82); English Language Achievement Test-ELAT (KR-20=7.47) and Mathematics Achievement Test-MAT (KR-20=7.46). Data were analysed using descriptive statistics. Respondents’ ages were 46.5±5.20 years (teachers) and 17.60±1.60 years (students). There were 59.0% male teachers and 57.0% female students. The SAA (ELAT=45.7% and MAT=38.4%) was low. Also, TAV ( =3.36) was high against the threshold of 2.5, and TAV (ß=0.59, t=7.29) significantly contributed to SAA. Teacher availability influenced the student academic achievement in public senior secondary schools in Southwestern Nigeria. Hence, all the education stakeholders should pay attention to this for improved student academic achievement.

This study endeavors to elucidate the intricate interplay between gastronomic involvement, gastronomic knowledge, past gastronomic experiences, gastronomic attractiveness, destination attractiveness, tourist satisfaction, and the intention to revisit. In the context of this investigation, the research population comprises 300 international culinary tourists who have ventured to the Turkish Republic of Northern Cyprus (TRNC). Employing SPSS software, a confirmatory factor analysis (CFA) was conducted to rigorously assess construct validity, reliability, and the discriminant and convergent validity of the research model. The findings of this research study underscore the positive relationships that exist between various dimensions of gastronomy, namely involvement in gastronomy, knowledge of gastronomy, and previous gastronomic experiences, and the perceived attractiveness of gastronomy. These findings enhance our understanding of how culinary elements affect tourists' perceptions and experiences, highlighting the crucial role of gastronomy in destination appeal and visitor satisfaction. This research is a significant step towards enhancing our comprehension of the dynamic nexus between gastronomy and the tourism industry, ultimately benefiting destination management and strategy development.

Classification of pre-processed fMRI dataset using the functional connectivity(FC) based features is considered a challenging task due to high dimensional FC features set and smaller dataset size. To tackle this specific FC high dimensional features set and a smaller dataset size , We have proposed here a GAN based dataset augmenter to firstly train the GAN on the NYU Connectivity Features dataset and used the trained GAN to generate synthetic features per category and after getting sufficient number of features per category , A multi-head attention mechanism was used as a head for the classification . We name our proposed approach as "ASD-GANNet" which is End-To-End and does not require hand-crafted features as the multi-head attention mechanism focuses on the features that are more relevant . Moreover , We compared our results with the 06 available state-of-the-art techniques from the literature and Our proposed approach results using "NYU" site as a training set for generating GAN based synthetic dataset are promising. We achieved an overall 10-fold cross validation based accuracy of 82% ,sensitivity 82% and specificity 81% outperforming the available state-of-the art approaches. Sitewise comparison of our proposed approach also outperformed the the available state-of-the-art as out of the 17 sites our proposed approach has better results in the 10 sites.

We estimate general public’s willingness to pay (WTP) for agricultural soil quality protection and improvement in Spain (n=1000) and the UK (n=984) using data from a cross-sectional survey via Qualtrics panels in March-April 2021. We use a double bound dichotomous choice contingent valuation approach to elicit the individuals’ WTP. We investigate the effect of uncertainty on the success of policies aiming at achieving soil protection. In addition, to understand the heterogeneity in individuals’ WTP for agricultural soil quality protection and improvement we model individuals’ WTP through individual’s awareness and attitudes toward agricultural soil quality protection and the environment, trust in institutions; risk and time preferences; pro-social behavior and socio-demographics in Spain and the UK. We found that there is significant public support for agricultural soil quality protection and improvement in Spain and the UK. We also found that the support does not vary significantly under uncertainty of success of policies aiming at achieving soil protection. However the individual’s reasons for supporting agricultural soil quality protection and improvement are found to depend on the level of uncertainty and country. Hence, promoting public support for soil protection needs to be tailored according to the level of general public’s perceived uncertainty and geographic location.

Seasonal precipitation variance significantly alters soil water content, potentially inducing water stress and affecting plant transpiration in semiarid deserts. This study explored the effects of environmental variables and hydraulic conductance on whole-tree transpiration (ET) in Mongolian pines (Pinus sylvestris var. mongolica) across different forest stages in the semiarid deserts of northern China. We measured ET using sap flow in mature (MMP), half-mature (HMP), and young (YMP) Mongolian pine plantations. Measurements included soil-leaf water potential difference (ΔΨ), atmospheric conditions, and soil moisture contents on sunny days, both in dry and wet periods. Seasonally variable rainfall distinctly affected soil moisture, correlating ET with photosynthetically active radiation (PAR) and vapor pressure deficit (VPD). Notable nocturnal sap flow occurred during the growing season. During the dry periods, both stomatal and hydraulic conductance influenced ET, whereas during the wet periods, stomatal conductance primarily regulated it. Discrepancies between predicted and measured ET were noticed: compared to the predicted ET, measured ET was lower during dry periods while higher during wet periods. Hydraulic conductance (KT) increased with tree height (H) and ΔΨ, although tall trees exhibited lower KT rates, suggesting that hydraulic compensation had occurred. This compensation, observed between 11:00 and 13:00, aligned with increased hydraulic resistance during dry periods. Decreasing hydraulic conductance intensified leaf water stress in dry periods, especially during the time when PAR and VPD were heightened, potentially increasing stomatal sensitivity to drought, promoting water conservation and plant survival. A linear relationship between predawn and midday leaf water potentials was noticed, indicating extreme anisohydric behavior across forest stages during both dry and wet periods. Although both stomatal and hydraulic conductance influenced ET during the dry period, MMP and YMP were more susceptible to drought conditions. Understanding these dynamics could help evaluate semiarid desert ecological functions for water conservation amidst uneven seasonal precipitation in Northern China.

Pulmonary arteriovenous malformations (PAVMs) are vascular anomalies resulting in abnormal connection between pulmonary arteries and veins. In 80% of cases, PAVMs are present from birth, but clinical manifestations are rarely seen in childhood. These congenital malformations are typically associated with Hereditary Hemorrhagic Telangiectasia (HHT), a rare disease that affects 1 in 5,000/8,000 individuals. HHT disease is frequently caused by mutations in genes involved in the TGF-β pathway. However, approximately 15% of patients do not have a genetic diagnosis and, among the genetically diagnosed, more than 33% do not meet the Curaçao Criteria. This makes clinical diagnosis even more challenging in the pediatric age group. Here, we introduce an 8 years old patient bearing a severe phenotype of multiple diffuse PAVMs caused by an unknown mutation which ended in lung transplantation. Phenotypically, the case of study follows a molecular pattern HHT-like. Therefore, molecular biology and cellular functional analysis has been performed in primary endothelial cells (ECs) isolated from the explanted lung. The findings revealed a loss of functionality in lung endothelial tissue and a stimulation of endothelial to mesenchymal transition. Understanding the molecular basis of this transition could potentially offer new therapeutic strategies to delay lung transplantation in severe cases.

Tumor to stroma ratio is a highly debated prognostic factor in the management of several solid tumors and there is no universal agreement on its practicality. In our study we proposed to confirm or dismiss the hypothesis that a simple measurement of stroma quantity is an easy-to-use and strong prognostic tool. We have included 74 consecutive patients with colorectal cancer who underwent primary curative abdominal surgery. The tumors have been grouped into stroma-poor (stroma <10%), medium-stroma (between 10 and 50%) and stroma-rich (over 50%). The proportion of tumor stroma ranged from 5% to 70% with a median of 25%. Very few, only 6.8% of patients had stroma-rich tumors, 4% stroma-poor tumors and 89.2%tumors with a medium quantity of stroma. The proportion of stroma, at any cut-off, had no statistically significant influence on the disease specific survival. This can be explained by the low proportion of stroma-rich tumors in our patient group and the inverse correlation of stroma proportion with tumor grade. The real-life proportion of stroma-rich tumors and the complex nature of the stroma-tumor interaction has to be further elucidated.

This research focuses on the computational design and analysis of various winglet Design types on a Boeing 737 aircraft. The idea is to compare the efficiencies of various winglet design types on a Boeing 737 aircraft half wing span and the picking out the best winglet design in respect to the pressure generated at the wing-tip and the lift-to-drag ratio of each winglet designs. The coefficient of lift-drag ratio in this research contribute to the reduction of fuel consumption

Based on the multiple coordination framework of “promising government-effective market-ordered society”, this paper takes 68 cases of adding elevators to old buildings as samples, and selects six conditional variables: approval optimization, financial subsidies, financing innovation, technological innovation, capable people leading and neighborhood committee guidance. Using Crisp-Set Qualitative Comparative Analysis (csQCA), this paper discusses the combination of conditions that affect the success or failure. It is found that: approval optimization and neighborhood committee guidance are sufficient conditions for the success; successful cases can be divided into three types: “political and social dual-drive type”, “market and social dual-drive type” and “ternary co-drive type”; lack of approval optimization, lack of financing innovation, and the existence of capable people leading are necessary conditions for the failure. The failure cases can be divided into “government and market double failure type” and “market failure type”.

This paper aims to understand better how attitudes towards the environment could influence preferences and willingness to pay for the development of sustainable tourism products on the Spanish island of Gran Canaria. A hybrid choice model is estimated to analyse how different latent constructs related to environmental concerns affect individuals’ preferences for a set of sustainable tourism activities. The data used in the analysis is obtained from a discrete choice experiment where different scenarios with nature-based tourism packages are created. A set of measurement indicators allowed us to gain insight into the underlying latent structure regarding the individuals’ attitudes towards the environment. The analysis consists of integrating these attitudes into a choice model, focusing on a market segment primarily comprised of potential customers who are young residents and non-residents. Results reveal significant heterogeneity in preferences and willingness to pay for the various activities under study when attitudinal latent factors are incorporated into the model. Our findings provide valuable insights for researchers, policymakers, and practitioners promoting sustainable tourism products.

Treatment of various diseases, in particular cancer, usually needs targeting biologically active molecules at a selected subcellular compartment. We modified our previously developed modular nanotransporters (MNTs) for targeting mitochondria. The new MNTs are capable of binding to the protein predominantly localized on the outer mitochondrial membrane, Keap1. These MNTs possessing antiKeap1 monobody co-localize with mitochondria upon addition to the cells. They efficiently interact with Keap1 both in solution and within living cells. A conjugate of the MNT with a photosensitizer, chlorin e6, demonstrates significantly higher photocytotoxicity than chlorine e6 alone. We assume that MNTs of this kind can improve efficiency of therapeutic photosensitizers and radionuclides emitting short-range particles.

A clinical simulation web-based program, known as FIRST2ACT (Feedback Incorporating Review and Simulation Techniques to Act on Clinical Trends) is designed to increase the efficacy of cli-nicians’ actions in the recognition and immediate response to a patient’s deterioration. This study, which was nested in a larger mixed method project, used ten focus groups (n=65) of graduate, enrolled, registered nurses, Associate Nurse Unit Managers, and general manag-ers/educators/coordinators from four different institutions to investigate whether nurses felt their practice was influenced by participating in either a face-to-face or web-based simulation educa-tional programme about patient deterioration. Results indicate individuals who were less ‘tech-savvy’ appreciated the flexibility of web-based learning, which increased their confidence. Face-to-face students appreciated self-reflection through performance evaluation. While face-to-face simulations were unable to completely duplicate symptoms, they did show nurses' adaptability. Both interventions enhanced clinical practice by improving documentation and re-plies while also boosting confidence and competence. Web learners initially experienced tech-related anxiety, which gradually subsided, demonstrating healthcare professionals' resilience to new learning approaches. Overall, the study highlighted the advantages and challenges of web-based and face-to-face education in clinical practice, emphasising the importance of adapta-bility and reflective learning for healthcare professionals. Further exploration of specific topics is required to improve practice, encourage knowledge sharing among colleagues, and improve early detection of patient deterioration.

The E-learning system has achieved great development after the pandemic. In this work, we proposed three artificial intelligence-based enhancements to our linguistic interactive E-learning system from different aspects. Compared with the original phonetic transcription exam system, our enhancements include an MFCC+CNN-based disordered speech classification module, a Transformer-based Grapheme-to-Phoneme converter, and a Tacotron2-based IPA-to-Speech speech synthesis system. This work not only provides a better experience for the users of this system but also explores the utilization of artificial intelligence technologies in the E-learning field and linguistic field.

HSF1 is a well-known Heat Shock Protein expression regulator in response to stress. It also regulates processes important for growth, development, or tumorigenesis. Here, we studied the HSF1 influence on the phenotype of non-tumorigenic human mammary epithelial (MCF10A and MCF12A) and several triple-negative breast cancer cell lines. MCF10A and MCF12A differ by HSF1 levels, morphology, growth in the matrigel, expression of epithelial (CDH1) and mesenchymal (VIM) markers (MCF10A are epithelial cells, MCF12A resemble mesenchymal cells). HSF1 down-regulation led to reduced proliferation rate and spheroid formation in matrigel by MCF10A cells, while it did not affect the MCF12A proliferation but led to CDH1 up-regulation and the formation of better-organized spheroids. HSF1 overexpression in MCF10A resulted in reduced CDH1 and increased VIM expression, and the acquisition of elongated fibroblast-like morphology. The above results suggest that elevated levels of HSF1 may direct mammary epithelial cells toward a mesenchymal phenotype while lowering HSF1 could reverse the mesenchymal phenotype to an epithelial one. Therefore, HSF1 may be involved in the remodeling of mammary gland architecture over the female lifetime. Moreover, HSF1 levels positively correlated with the invasive phenotype of triple-negative breast cancer cells, and their growth was inhibited by the HSF1 inhibitor, DTHIB.

This paper presents the experimental and numerical study on a ductile beam-column connection between a composite reinforced concrete truss (CRCT) beam and Concrete Filled Tube (CFT) column subjected to bending and shear loads. Two experimental models with different beam-column joint testing schemes, extracted from the same prototype three-dimensional structure designed according to the rules of the capacity design provided by seismic code, were subjected to quasi-static cyclic tests by applying gravitational loads and the horizontal seismic force. The main objective of this paper is to verify the experimental ductile behavior of both specimens and to simulate the experimental global and local response by nonlinear static analysis considering different modelling approaches. The comparison between the experimental and numerical results highlights, for both models considered, the ductile and dissipative capacity of the connection system, designed following the criterion of the hierarchy of resistances proposed by the current Italian code. Different experimental setup showed similar results demonstrating the repeatability of the test and its reproducibility through the nonlinear numerical analysis.

This study examined the status of Education for Sustainable Development (ESD) practices and the understanding of Sustainable Development (SD) among Saudi kindergarten teachers in a specific governorate. Two hundred twenty-seven kindergarten teachers participated, and data was collected through a questionnaire. The results indicated that most kindergarten teachers (89.9%) were unaware of SD. The overall status of ESD practices among the participating teachers was weak, with an average score of 2.60 out of 4. Among the different dimensions, values (2.74), competencies (2.69), and practice (2.65) obtained relatively higher scores, while the content dimension (2.49) received the lowest score. Significant differences were found in the mean scores of ESD practices based on teachers’ qualifications and the type of school. However, no differences were observed based on experience. The lack of awareness regarding SD emerged as the primary barrier to implementing ESD in kindergarten institutions. Expanding teacher training was identified as the most crucial step in promoting ESD in kindergartens. The findings highlight the importance of raising awareness among Saudi kindergarten teachers about SD, providing professional development opportunities to enhance ESD implementation in classrooms, and creating teaching materials aligned with ESD principles.

We consider a coded compressed sensing protocol for unsourced massive random access (URA) that concatenates a shared Patterned Reed-Muller (PRM) inner codebook to an outer error-correction code. In this paper, an iterative list PRM projection algorithm is proposed to supplant the signal detector associated with the inner PRM sequences. In particular, we first propose an enhanced paths-saving algorithm called list PRM projection detection for the single-user scenario that keeps multiple candidates for the first few layers to remedy the risk of spreading errors. On this basis, we further propose an iterative list PRM projection algorithm for the multi-user scenario. The vectors for PRM codes and channel coefficients are jointly detected in an iterative manner, which offers significant improvements regarding the convergence rate for signal recovery. Furthermore, the performances of the proposed algorithms are analyzed mathematically, and we verified that the theoretical simulations are consistent with the numerical simulations. Finally, we concatenate the inner PRM codes that employ the iterative list detection to two practical error-correction outer codes. According to the simulation results, we conclude that the packetized URA with the proposed iterative list projection detection works better than benchmarks in terms of the number of active users it can support in each slot and the amount of energy needed per bit to meet an expected error probability.

Eco-labels are an instrument for enabling informed food choices and supporting a demand-sided change towards a more and urgently needed sustainable food system. Lately, novel eco-labels that depict a product’s environmental life-cycle assessment on a multi-level scale are being tested across Europe’s retailers. This study elicits consumers preferences and willingness to pay (WTP) for a multi-level eco-label. A Discrete Choice Experiment was conducted in Austria. Individual partworth utilities were estimated by means of Hierarchical Bayes. Results show higher WTP for a positive evaluated multi-level label, revealing consumers’ perceived benefits of colorful multi-level labels over binary black-and-white designs. Even a negative evaluated multi-level label showed higher WTP compared to no label, pointing towards limited effectiveness of eco-labels. Respondents’ preferences for eco-labels were independent from their subjective eco-label knowledge, health consciousness, and environmental concern. The attribute “protein source” was most important, and preferences for animal-based protein source (beef) was strongly correlated with consumers’ meat attachment, implying that a shift towards more sustainable protein sources is challenging and sustainability labels have only a small impact on the meat product choice of average consumers.

Obesity is a troubling public health problem worldwide as it increases risks of respiratory complications, systemic arterial hypertension, type 2 diabetes mellitus, sleep disorders, cardiovascular diseases, and metabolic syndrome (MetS). As a measure to counteract comorbidities associated with severe obesity, bariatric surgery stands out. This study aimed to investigate the adiponectin/leptin ratio in women with severe obesity with and without MetS undergone Roux-en-Y Gastric Bypass (RYGB) and to characterize the biochemical, glucose, and inflammatory parameters of blood in women with severe obesity before and after RYGB. Were enrolled female with severe obesity undergoing RYGP with MetS (n=11) and without (n=39). Anthropometric data and blood samples were obtained before and 6 months after RYGB to analyze total cholesterol, low-density lipoprotein (LDL), high- density lipoprotein (HDL), non-HDL total cholesterol, and glucose; and circulating levels of adiponectin and leptin. Significant reductions in weight, body mass index, and glucose, total cholesterol, LDL, and leptin were observed after surgery, with higher levels of HDL, adiponectin, and adiponectin/leptin ratio observed after surgery compared to preoperative values. This study demonstrated that weight loss induced by RYGB in patients with severe obesity with or without MetS improved biochemical and systemic inflammatory parameters, particularly the adiponectin/leptin ratio.

Background and Objectives: Acute lung injury (ALI) is an inflammatory response in the lung caused by bacteria, viruses, trauma and other factors that results in lack of alveolar surfactant and subsequently respiratory distress. Endothelial-to-mesenchymal transition (EndoMT) is closely related to ALI-induced pulmonary fibrosis development and progression. This study examined the effect of milk fat globulin factor 8 (MFGE8) knockdown and overexpression on lipopolysaccharide (LPS)-induced EndoMT. Methods: Total MFGE8 activity in patients with acute respiratory distress syndrome (ARDS) and healthy volunteers was assessed using a colorimetric kit. In vitro, cell morphology was observed by microscopy, and invasion and migration were tested by Transwell and scratch assays. Specific siRNAs were transfected into HLMECs to downregulate MFGE8, and CD31 and α-SMA protein expression was detected by fluorescence microscopy and FCM. MFGE8, BMP, Smad 1, Smad4, Smad5, Snail, CD31 and α-SMA protein and gene expression was assessed by western blotting (WB) and qRT‒PCR. In vivo, the changes in cell morphology and alveolar septum in the lung of mice (C57BL/6, aged 7-8 weeks, male) were observed by H&E staining. In addition, ECM deposition in lung tissue was detected by Masson staining. CD31 and α-SMA protein expression in lung tissue was measured by WB. Results: The serum level of MFGE8 was lower in the ARDS group than in the control group. MFGE8 was identified as a protective factor associated with hospital survival. In vitro, the treatment of human lung microvascular endothelial cells (HLMECs) with LPS for 96 h clearly changed the cells from the typical cobblestone shape of ECs to spindle-like fibroblasts. The scratch and Transwell assay results indicated that endothelial cell migration and invasion were enhanced in the LPS group compared with the control group. Fluorescence microscopy, FCM, WB and PCR showed that LPS greatly inhibited CD31 (endothelial marker) expression and increased α-SMA (mesenchymal marker) expression. These data showed that LPS could induce EndoMT in HLMECs. Notably, siRNA-treated HLMECs yielded the same results. The administration of rhMFGE8 to HLMECs in the LPS or LPS+siRNA group ameliorated the changes in cell morphology and decreased cell migration and invasion. rhMFGE8 attenuated the effect of LPS or LPS+siRNA on EndoMT induction by increasing CD31 and decreasing α-SMA protein and gene expression. Moreover, activation of BMP/Smad1/5-Smad4 signalling in response to LPS and Snail (related to EndoMT transcription factors) expression were increased by MFGE8 knockdown but inhibited by rhMFGE8. In vivo, H&E staining revealed a thickened alveolar septum in the LPS group, and the thickness increased over time; in contrast, rhMFGE8 reversed this effect. ECM deposition occurred early in ALI induced by LPS and increased over time, and the administration of rhMFGE8 reversed this effect. WB showed that LPS inhibited CD31 protein expression and increased α-SMA protein expression in lung tissue. Conclusions: rhMFGE8 exerts a protective effect early in LPS-induced EndoMT through BMP/Smad1/5/Smad4 signalling and could be a therapeutic target in ALI.

This study aimed to explore what factors affect teachers’ acceptance and instructional use of ICT in Chinese higher vocational colleges. Grounded in the modified UTAUT model, the current study investigated the direct and indirect effects of teachers’ performance expectancy, effort expectancy, external conditions, and behavioral intentions on using ICT in teaching. A total of 6087 teachers from 219 vocational colleges in 28 provinces in China participated in a large-scale survey. Structural equation modeling revealed that the teachers’ psychological perceptions (including performance expectancy, effort expectancy, and intention to use ICT technology) and the external support conditions (including professional development support, infrastructures, the climate of organizational reform and innovation, and teacher performance assessment mechanisms) significantly directly affect the use of ICT in Chinese higher vocational college teachers’ teaching practice. Moreover, this study confirmed the mediating role of teachers’ intention to use ICT in teaching in the relationship between teachers’ psychological perceptions and ICT instructional usage behavior. However, there were differences in the significance of these variables in the chain effect of teachers’ intention to use ICT. These findings expand our understanding of the factors influencing ICT use in teaching among VET teachers in China and thus provide practical implications for higher vocational college managers to promote teachers’ ICT teaching behaviors.

Proteomic analysis revealed the preservation of many proteins in the “Heslington brain” (which is at least 2,600-year-old brain tissue uncovered within the skull excavated in 2008 from a pit in Heslington, Yorkshire, England). Five of these proteins (“main proteins”), heavy, medium, and light neurofilament proteins (NFH, NFM, and NFL), glial fibrillary acidic protein (GFAP), and myelin basic (MBP) protein are engaged in the formation non-amyloid protein aggregates, such as intermediate filaments and myelin sheath. We used a wide spectrum of bioinformatics tools to evaluate the prevalence of functional disorder in several related sets of proteins, such as “main proteins” and their 44 interactors, as well as all other protein identified in the Heslington brain. These analyses revealed that all five “main proteins”, half of their interactors and almost one third of the Heslington brain proteins are expected to be mostly disordered. Furthermore, most of the remaining proteins are expected to contain sizable disordered regions. This is in contrary the expected substantial (if not complete) elimination of the disordered proteins from the Heslington brain. Therefore, it seems that the intrinsic disorder of NFH, NFM, NFL, GFAP, and MBP, their interactors and many other proteins might play a crucial role in preserving the Heslington brain by forming tightly folded brain protein aggregates, in which different parts are glued together via the disorder-to-order transitions.

This venture targets giving a correspondence framework that can improve the legal framework execution and cooperation and furthermore make it simple to lead execution audits. This examination depicts restricted admittance to the right legitimate data just as admittance to courts and court administrations as the essential factors that limit admittance to equity. The basic target fundamental for accomplishing the point incorporates planning an online easy to understand data framework that would improve correspondence and association between legal professionals like legal advisors and disputants. The undertaking uses a subjective methodology that zeroed in on the substance investigation of essential information. Key members were court laborers like attorneys and agents, just as court clients like disputants. Pre-plan discoveries uncovered that current legitimate data frameworks – basically court sites – neglect to recognize their crowd by treating all court clients similarly comparative with the correspondence of lawful data. Likewise, the issue of admittance to equity includes the significant expense of equity also, restricted legal data that elevates admittance to equity. Post-plan discoveries from the online overview directed after the turn of events and execution of the IT curio uncovered a powerful and productive legitimate data framework. Exploration discoveries supported the advancement of an IT antiquity that records for huge shortcomings in current legal data frameworks, for example, their failure to pass on fitting legitimate data intelligently and productively. In outline, the investigation prescribes the reception of saw control to work fair and square of certainty of court clients and the differentiation between court clients to convey the right data to the right crowd.

Image segmentation is a new challenge prob- lem in medical application. The use of medical imaging has become an integral part of research, as it allows us to see inside the human body without surgical intervention. Many researcher have studied brain segmentation. One stage method is used to segment the brain tissues. In this paper, we proposed the multi-stage generative ad- versarial network to solve the problem of information loss in the one-stage. We utilize the coarse-to-fine to improve brain segmentation using multi-stage generative adversar- ial networks (GAN). In the first stage, our model generated a coarse outline for (i) background and (ii) brain tissues. Then, in the second stage, the model generated outline for (i) white matter (WM), (ii) gray matter (GM) and (iii) cerebrospinal fluid (CSF). A good result can be achieved by fusing the coarse outline and refine outline. We conclude that our model is more efficient and accu- rate in practice for both infant and adult brain segmenta- tion. Moreover, we observe that multi-stage model is faster than prior models. To be more specific, the main goal of multi-stage model is to see the performance of the model in a few shot learning case where a few labeled data are available. For medical image, this proposed model can work in a wide range of image segmentation where the convolution neural networks and one-stage methods have failed.

Using low-cost portable air quality (AQ) monitoring devices is a growing trend in personal exposure studies enabling a higher spatio-temporal resolution and identifying acute exposure to high concentrations. Comprehension of results by participants is not guaranteed in exposure studies. However, information on personal exposure is multiplex, which calls for participant involvement in information design to maximise communication output and comprehension. This study describes and proposes a model of a user centred design (UCD) approach for preparing a final report for participants involved in a multi-sensor personal exposure monitoring study performed in seven cities within the EU Horizon 2020 ICARUS project. Using a combination of human-centred design (HCD), human-information interaction (HII) and design thinking approaches, we iteratively included participants in the framing and design of the final report. User needs were mapped using a survey (n=82), and feedback on the draft report was obtained from a focus group (n=5). User requirements were assessed and validated using a post-campaign survey (n=31). The UCD research was conducted amongst participants in Ljubljana, Slovenia and the results report was distributed among the participating cities across Europe. The feedback received made it clear that the final report was well-received and helped participants better understand the influence of individual behaviours on personal exposure to air pollution.

During the COVID-19 outbreak, most university courses have been offered on online platforms. A sudden shift from face-to-face classroom learning to online formats could influence the learning effectiveness of classes. This study aims to investigate differences in the learning effectiveness of online and face-to-face lecture courses. It also explores factors that impact the effectiveness of online instruction. These factors include interactions among learners, interactions between learners and the instructor, the quality of online platforms, learners’ ability to use devices and follow instructions, and learners’ situational challenges. The study participants were 261 university students at King Mongkut’s University of Technology Thonburi in Bangkok, Thailand. All participants were enrolled in at least one lecture course, such as history, humans and the environment, the environment and development, or general philosophy, during the 2019 academic year. A questionnaire was distributed to participants after they completed these courses in May 2020. Paired simple t-test analyses were used to compare the effectiveness of online and face-to-face classes, and a multiple regression analysis was used to identify factors that impact the learning effectiveness of online classes. The results show that online classes are less effective than face-to-face courses. The multiple regression analysis also revealed that the effectiveness of online learning was significantly impacted by learners’ ability to interact with classmates during class, their ability to interact with instructors after the class, the quality of online platforms, and disturbances or distractions in learners’ environments.

Hopfield Neural Networks (HNNs) are recurrent neural networks used to implement associative memory. Their main feature is their ability to pattern recognition, optimization, or image segmentation. However, sometimes it is not easy to provide the users with good explanations about the results obtained with them due to mainly the large number of changes in the state of neurons (and their weights) produced during a problem of machine learning. There are currently limited techniques to visualize, verbalize, or abstract HNNs. This paper outlines how we can construct automatic video generation systems to explain their execution. This work constitutes a novel approach to get explainable artificial intelligence systems in general and HNNs in particular building on the theory of data-to-text systems and software visualization approaches. We present a complete methodology to build these kinds of systems. Software architecture is also designed, implemented, and tested. Technical details about the implementation are also detailed and explained. Finally, we apply our approach for creating a complete explainer video about the execution of HNNs on a small recognition problem.

This research analyzed South Korean companies’ adoption of remote work during the COVID-19 pandemic, by focusing on the dual labor market structure comprising of the primary (large corporations) and the secondary sectors (small and medium enterprises (SMEs)). Companies in the dual labor market were classified as per firm size. We used Statistics Korea’s August supplementary data from the Economically Active Population Survey, covering 2017–2020. This empirical study analyzed the factors affecting remote work in 2020, after the outbreak of the pandemic. The results showed that the probability of large corporations introducing remote work during the pandemic increased by a significantly larger margin than for small and medium-sized firms. This suggests that the polarization within the dual labor market structure between large corporations and SMEs also spilled over into companies’ adoption of remote work, which was initially introduced to prevent the spread of the pandemic. Additionally, the polarization in the use of digital technology is likely to persist even after the pandemic. Hence, based on our analysis of remote work adoption in the dual labor market, this study examined the system and factors of labor-management relations contributing toward such polarization and presented policy directions for the current labor market structure.

The consequences of manipulations in structure and amino acid composition of native cyclolinopeptide A (CLA) from linen seeds and its linear precursor on their biological activities and mechanisms of action are reviewed. The modifications included truncation of the peptide chain, replacement of amino acid residues with proteinogenic or non-proteinogenic ones, modifications of peptide bond, and others. The studies revealed changes in the immunosuppressive potency of these analogs investigated in a number of in vitro and in vivo experimental models, predominantly in rodents, as well as differences in their postulated mechanism of action. The modified peptides were compared with cyclosporine A and parent CLA. Some of the synthesized and investigated peptides show potential therapeutic usefulness.

This is the first study to comprehensively evaluate the benefit of urban open spaces and cropland with different adjacent public facilities seen as locally undesirable (“not in my backyard,” NIMBY) or desirable (“yes in my backyard,” YIMBY). The total benefit increases or decreases for urban open space and cropland with adjacent NIMBY or YIMBY facilities in a municipality in Taiwan. The results show that for the city as a whole, the current arrangement of NIMBY and YIMBY in different zones decreases the total benefit of urban open spaces in highly urbanized zones and increases the total damage to cropland in extremely rural zones. This indicates a need to avoid further installing NIMBY or YIMBY facilities in already occupied urban open spaces. The results also demonstrate that locating NIMBY or YIMBY facilities near cropland fails to highlight the benefit of YIMBY facilities and magnifies opposition to NIMBY facilities. For individual housing units, the total damage is 1.87% of the average housing price for cropland-type open space with adjacent NIMBY or YIMBY facilities, and the total benefit is 7.43% of the average housing price for urban-type open space in a highly urbanized area. In contrast, the total benefit for open space with adjacent NIMBY or YIMBY facilities is a 2.95%-13.80% increase in the average housing price for areas with mixed urban open space and cropland.

This article examines the impact of some system parameters on an industrial system composed of two dissimilar parallel units with one repairman. The active unit may fail due to essential factors like aging or deteriorating, or exterior phenomena such as Poisson shocks that occur at various time periods. Whenever the value of a shock is larger than the specified threshold of the active unit, the active unit will fail. The article assumes that the repairman has the right to take any of two decisions at the beginning of the system operation: either a takes a vacation if the two units work in a normal way, or stay in the system to monitor the system until the first system failure. In case of having a failure in any of the two units during the absence of the repairman, the failing unit will have to wait until the repairman is called back to work. We suppose that the value of every shock is assumed to be i.i.d. with some known distribution. The length of the repairman’s vacation, repair time, and recall time are arbitrary distributions. Various reliability measures have been calculated by the supplementary variable technique and the Markov’s vector process theory. At last, numerical computation and graphical analysis have been given for a particular case to validate the derived indices.

One of the most used markers of cancer stem cells in several cancers, including colorectal cancer and breast cancer, is CD44. CD44 is a glycoprotein that traverses the cell membrane and binds to many ligands including hyaluronan resulting in activation of signaling cascades. Several reports have shown conflicting data on the expression of CD44 and that the expression depends on modes of investigations and subtypes of cancers. In addition, the correlation between CD44 expression and drug resistance, immune infiltration, EMT, metastasis and patients prognosis in several cancer types remains unclear. This study investigated CD44 expression in several cancers and explored its relationship with tumorigenesis using various publicly available databases, including The Cancer Genome Atlas, GEPIA, Oncomine, Genomics of Drug Sensitivity in Cancer and Tumor Immune Estimation Resource. Our analysis reveals that CD44 is differentially expressed in different cancers. CD44 expression is significantly associated with cancer patients’ survival in gastric, pancreatic and colorectal cancers. In addition, CD44 expression is closely linked with immune infiltration and immune suppressive features in pancreatic, colon adenocarcinoma and stomach cancer. High CD44 expression was significantly correlated with the expression of drug resistance-, EMT- and metastasis- linked genes. Tumors expressing high CD44 have higher mutation burden and afflict older patients than tumors expressing low CD44. Cell lines expressing high CD44 are more resistant to anti-cancer drugs compared to those expressing low CD44. Protein-protein interaction investigations and functional enrichment analysis showed that CD44 interacts with gene products related to cell-substrate adhesion, migration, platelet activation, and cellular response to stress. KEGG pathway analysis revealed that these genes play key roles in biological adhesion, cell component organization, locomotion, G-α-signaling and the response to stimulus. Overall, this investigation reveals that CD44 play significant roles in tumorigenesis, can be used as a prognostic biomarker in several cancers and can be therapeutically targeted in cancer therapy.

In roll-to-roll (R2R) processing, uniformity of the web is a crucial factor that can guarantee high coating quality. To understand web defects due to thermal deformation, we analyzed the effects of web unevenness on the coating quality of an yttria-stabilized zirconia (YSZ) layer, a brittle electrolyte of solid oxide fuel cells (SOFCs). We used finite element analysis to analyze the thermal and mechanical deformations at different drying temperatures. A YSZ layer was also coated using R2R slot-die coating to observe effects of web unevenness on the coating quality. It was seen that web unevenness was generated by thermal deformation due the conduction and convection heat from the dryer. Owing to varying web unevenness with time, the YSZ layer developed cracks. At higher drying temperatures, more coating defects having larger widths were generated. Results indicated that web unevenness at the coating section led to coating defects, which could damage the SOFC and decrease its yield in the R2R process. From this study, we suggest that coating defects, generated by the web unevenness owing to the convection and conduction heat, should be considered for the high-volume production of brittle electrolytes using the R2R process.

The work is devoted to the investigation of virus quasispecies evolution and diversification due to mutations, competition for host cells, and cross-reactive immune responses. The model consists of a nonlocal reaction-diffusion equation for the virus density depending on the genotype considered as a continuous variable and on time. This equation contains two integral terms corresponding to the nonlocal effects of virus interaction with host cells and with immune cells. In the model, a virus strain is represented by a localized solution concentrated around some given genotype. Emergence of new strains corresponds to a periodic wave propagating in the space of genotypes. The conditions of appearance of such waves and their dynamics are described.

Flood is identified as one of the major disasters in the world; it destroys both human and properties across the world, where lives are lost, properties, public infrastructure, farmlands and agricultural produce with farm crops carted away as a result of flood disaster. Studies revealed that the flood in itself is not the danger, but the level of human vulnerability to flooding disaster risk, which enhances its destructive capabilities. However, based on the challenges poses by flood disaster risk, this research identifies Ala river in Akure as a potential cause of flood, considering its location and other human activities around the river. Therefore, the research used Ala-river a case study to identify and mapped out areas susceptible to flood disaster risk. The research made use of both literature review and conducted goe-data gathering with the application GIS-computer database to retrieve georeferencing relevant data from the fieldwork in the study area of Ala-river basin to mapped out locations vulnerable to achieve the research aim. The research adopted a Geo-mapping of the vulnerable area to Ala-River basin using arc-GIS tool in combination with other software such as IKONAS and OLI (Operation Land Imager) for the production of the study area imagery, ER-ITERIM was used for the collection of rainfall data and FAO was applied for digital soil mapping. These applications produced; the land use/land cover map, digital elevation map, buffer map using 30 meters setback, annual rainfall map, soil types map, vulnerability map and soil textural table for the study area. Analysis of the produced and generated maps shows 316 buildings vulnerability to flood disaster risk; the soil texture and types, and alternative use to which the soil types can be useful. The research recommends that demolition of the identified 316 buildings prone to flood disaster and compliance of building construction to 30 meters setback by developers. Others are the conversion of the future land setback for urban agricultural purposes and preservation of water retention areas for agricultural activities during the dry season among others. The study concludes that relevant government agencies in the State and in particular in Akure South Local Government should ensure prompt compliance and implementation of the recommendations to avoid potential flood disaster risks.

A significant part of the literature on innovative practice in medicine relates to seizing opportunities and curbing harms for patients in desperate situations. Unfortunately, the term innovation has multiple meanings and a rich rhetorical flourish that adds confusion and misunderstanding to an already difficult debate. This paper aims to enhance the current definition of innovative practice for medicine. First, we replace the term innovation with the more literal of new non-validated practice. To identify this meaning, we analyse the traditional research ethics’ distinction between research, validated practice, and innovation in the Belmont Report. Second, we propose the following explicit definition of new non-validated practice: the first or recent use of diagnostic, therapeutic or preventive interventions that introduce a significant change, with an insufficient level of evidence of safety or efficacy for regular healthcare, and with the main aim to benefit individual patients. This definition is a promising conceptual tool to inform empirical research, ethicists, and the harmonization of its regulation and legislation (e.g. right-to-try laws).

Alpine forest gaps can distribute snowfall, solar radiation and rainfall, thus inducing a heterogeneous hydrothermal microenvironment between the inside and outside areas of forest gaps. Additionally, the characteristics of the heterogeneous microenvironment could vary greatly across the gap location properties during winter and the growing season. To determine the response of total phenol loss (TPL) from the litter to alpine forest gap disturbance during decomposition, we conducted a field litterbag experiment within a representative fir (Abies faxoniana Rehd.) forest based on the gap location properties. The TPL and abundances of fungi and bacteria from two typical shrub species (willow, Salix paraplesia Schneid., and bamboo, Fargesia nitida (Mitford) Keng f.) were measured during the following periods over two years: snow formation (SF), snow cover (SC) snow melting (ST), the early growing season (EG) and the later growing season (LG). At the end of the study, we found that the snow cover depth, frequencies of the freeze-thaw cycle and the fungal copy g-1 to bacterial copy g-1 ratio had significant effects on the litter TPL. The abundances of fungi and bacteria decreased from the gap center to the closed canopy during the two SF, SC, ST and LG periods and reversed during the two EG periods. The TPL closely followed the same trend as the microbial abundance during the first year of incubation. In addition, both species had larger TPLs in the gap center during the first winter, first year and entire two years. These findings suggest that alpine forest gap formation accelerates litter TPL and plays a dual role during specific critical periods by distributing abiotic and biotic factors directly and indirectly. In conclusion, reduced snow cover depth and duration during winter warming under current climate change scenarios or as gaps vanish may slow litter TPL in alpine biomes.

Genetic testing has expanded out of the research laboratory into medical practice and the direct-to-consumer market, and rapid analysis of the resulting genotype data can now have significant impact. We present a method for summarizing personal genotypes as ‘genotype fingerprints’ that meet these needs. Genotype fingerprints can be derived from any single nucleotide polymorphism (SNP)-based assay, and remain comparable as chip designs evolve to higher marker densities. We demonstrate that they support distinguishing types of relationships among closely related individuals and closely related individuals from individuals from the same background population, as well as high-throughput identification of identical genotypes, individuals in known background populations, and de novo separation of subpopulations within a large cohort through extremely rapid comparisons. While fingerprints do not preserve anonymity, they provide a useful degree of privacy by summarizing a genotype in a way that prevents reconstruction of individual marker states. Genotype fingerprints are therefore well-suited as a format for public aggregation of genetic information to support ancestry and relatedness determination without revealing personal health risk status.

Viruses can infect a cell via one or both routes viz. cell-to-cell (c-c) or cell-free (c-f) . Pathogenesis studies of various viruses, including HIV, have shown that c-c transmission yields a significantly higher infection magnitude than the c-f route. Expectedly, potent antibodies inhibited c-f infection more efficiently than with c-cell transmission. To achieve a one-step, synchronous infection cycle that provides amplified infection, we have studied a consistent and efficient c-c HIV infection model since 1992. H9 cells persistently infected with HTLV-IIIB (H3B cells) and uninfected target CD4+ lymphocyte line (HuT78) were mixed in a ratio of 1:4 respectively. We have recently used this model to produce HIV designer antigens that have been shown to elicit monoclonal as well as polyclonal specific antibodies against novel epitopes that are formed post virus-cell engagement, but prior to fusion. The model can be extended for HIV neutralizing antibody assays or drug inhibitors against high multiplicity of infection.

In this study, the resource blocks (RB) are allocated to user equipment (UE) according to the evolutional algorithms for long term evolution (LTE) systems. Particle Swarm Optimization (PSO) algorithm is one of the evolutionary algorithms, based on the imitation of a flock of birds foraging behavior through learning and grouping the best experience. In previous work, the Simple Particle Swarm Optimization (SPSO) algorithm was proposed for RB allocation to enhance the throughput of Device-to-Device (D2D) communications and improve the system capacity performance. In simulation results, with less population size of M = 10, the SPSO can perform quickly convergence to sub-optimal solution in the 100^th generation and obtained sub-optimum performance with more 2 UEs than the Rand method. Genetic algorithm (GA) is one of the evolutionary algorithms, based on Darwinian models of natural selection and evolution. Therefore, we further proposed a Refined PSO (RPSO) and a novel GA to enhance the throughput of UEs and to improve the system capacity performance. Simulation results show that the proposed GA with 100 populations, in 200 generations can converge to suboptimal solutions. Therefore, with comparing with the SPSO algorithm the proposed GA and RPSO can improve system capacity performance with 1.8 and 0.4 UEs, respectively.

This paper presents a complete control strategy of the active return-to-center (RTC) control for electric power steering (EPS) systems. We first establish the mathematical model of the EPS system and analyze the source and influence of the self-aligning torque (SAT). Second, based on the feedback signals of steering column torque and steering wheel angle, we give the trigger conditions of a state switch between the steering assist state and the RTC state. In order to avoid the sudden change of the output torque for the driving motor when the state switches frequently between the steering assist state and the RTC state, we design an undisturbed state switching logic algorithm. This state switching logic algorithm ensures that the output value of the RTC controller is set to an initial value and increases in given steps up to a maximum value after entering the RTC state, and the output value of the RTC controller will reduce in given steps down to zero when exiting the RTC state. This therefore ensures smooth switch control between the two states and improves the driver’s steering feeling. Third, we design the RTC controller, which depends upon the feedback signals of the steering wheel angle and the angular velocity. In addition, the controller increases the auxiliary control function of the RTC torque based on vehicle speed. The experimental results show that the active RTC control method does not affect the basic assist characteristics, which effectively reduces the residual angle of the steering wheel at low vehicle speed and improves the RTC performance of the vehicle.

With the development of the energy sector based on renewable primary sources, structural changes are emerging for the entire national energy system. Initially, it was estimated that energy generation based on fossil fuels would decrease until its disappearance. However, the evolution of CO2 capture capacity leads to a possible coexistence for a certain period with the renewable energy sector. The paper develops this concept of coexistence of the two systems, with the positioning of green hydrogen not only within the renewable energy sector but also as a transformation vector for carbon dioxide captured in the form of synthetic fuels such as CH4 and CH3OH. The paper also analyzes the economic aspects related to price differences for energy produced in the two sectors, as well as their interconnection. The technical aspect, as well as the economic one, for storage through various other solutions besides hydrogen, has been highlighted. The development of the renewable energy sector and its demarcation from the fossil fuel energy sector, even with the transcendent vector represented by green hydrogen, leads to the deepening of dispersion aspects between the electricity sector and the thermal energy sector, a less mentioned aspect in current works but of great importance.

Puerto Rico's geographic and climatic conditions render it highly susceptible to natural disasters, particularly hurricanes. The devastation caused by Hurricane Maria in 2017 highlighted the fragility of the island's centralized energy infrastructure, which led to prolonged power outages and severe disruptions in essential services. This review explores the potential of biomass energy to enhance resilience in post-disaster scenarios, focusing on Puerto Rico as a case study. Biomass energy, derived from organic materials like agricultural residues, woody biomass, and municipal solid waste, offers a renewable and locally sourced power solution that can be rapidly deployed. Key biomass conversion technologies, including direct combustion, gasification, anaerobic digestion, and pyrolysis, are examined for their applicability and benefits in emergency energy provision. The implementation of biomass-powered microgrids in Puerto Rico, such as those by Casa Pueblo and Arensis, demonstrates the feasibility and effectiveness of decentralized energy systems in disaster recovery. These microgrids provide reliable power to critical infrastructure, reduce dependence on fossil fuels, and support waste management efforts. The review also discusses ongoing research and development in advanced biomass technologies, such as second-generation biofuels, algae-based biomass, and biomass-to-hydrogen conversion, which can further enhance energy efficiency and sustainability. Additionally, the economic, environmental, and social impacts of biomass energy are evaluated, highlighting its role in job creation, waste reduction, emission control, and community resilience. Policy recommendations include streamlining permitting processes, enhancing financial incentives, developing feedstock supply chains, and incorporating biomass into disaster recovery plans. The findings suggest that integrating biomass energy into Puerto Rico’s energy strategy can significantly improve its capacity to respond to and recover from natural disasters, promoting long-term sustainability and resilience.

This study utilizes a regional numerical weather model incorporating multilayer urban canopy parameterization alongside a building energy model (BEP + BEM) to examine the sensitivity of various urban parameters, including those defining urban materials and building environments, during a real-case heatwave event in the Chicago Metropolitan Area (CMA) in August 2023. The application of local climate zones further refines this analysis. Findings indicate that wall conductivity and ground albedo play significant roles in affecting urban near-surface temperatures. Conversely, alterations in other urban parameters are found to exert minimal influence on near-surface temperatures throughout the heatwave. In terms of building energy consumption, the selection of the target indoor temperature emerges as a pivotal factor. While adjustments in ventilation rates also bear considerable effects, other variables appear to have a subdued impact on energy usage. Additionally, the marginal effect of wall emissivity on energy consumption highlights the intricate balance between different heat transfer mechanisms and the adaptive capacity of building heating and cooling systems.

Deploying Cellular Internet of Things (CIoT) devices in urban and remote areas faces significant energy efficiency challenges. This is especially true for Narrowband IoT (NB-IoT) devices, which are expected to function on a single charge for up to 10 years while transmitting small amounts of data daily. The 3rd Generation Partnership Project (3GPP) has introduced energy-saving mechanisms in Releases 13 to 16, including Early Data Transmission (EDT) and Preconfigured Uplink Resources (PUR). These mechanisms extend battery life and reduce latency by enabling data transmission without an active Radio Resource Control (RRC) connection or Random Access Procedure (RAP). This paper examines these mechanisms using the LENA-NB simulator in the ns-3 environment, which is a comprehensive framework for studying various aspects of NB-IoT. The LENA-NB has been extended with PUR, and our analysis shows that PUR significantly enhances battery life and latency efficiency, particularly in high-density environments. Compared to the default RAP method, PUR reduces energy consumption by more than 2.5 times and increases battery life by 1.6 times. Additionally, PUR achieves latency reductions of 2.5-3.5 times. The improvements with PUR are most notable for packets up to 125 bytes. Our findings highlight PUR’s potential to enable more efficient and effective CIoT deployments across various scenarios. This study represents a detailed analysis of latency and energy consumption in a simulated environment, advancing the understanding of PUR’s benefits.

When water molecules or other particles collide with protein molecules in a solution, the protein molecules absorb some of the momentum and deform, forming a certain molecular potential energy. When a protein molecule in a high-energy state changes to a stable state, if there is a suitable substrate binding and the potential energy of the protein molecule is greater than the energy required to break the substrate chemical bond, catalytic action will occur. The α-helices and β-folds in protein molecules play a major role in converting the kinetic energy of water molecules into their own potential energy due to the large number of amino acids involved and their regular structure. The internal structural deformation of proteins caused by the impact of water molecules on α-helices and β-folds also has a profound impact on the structure of substrates. ‌

The field of solar technology has experienced remarkable advancements, transforming from early photovoltaic discoveries to a diverse array of high-efficiency, cost-effective solutions. This review explores the evolution of solar technology, detailing its development from the initial discovery of the photovoltaic effect to contemporary innovations. The current generation of solar technologies, including silicon photovoltaic cells, thin-film solar cells, perovskite solar cells, bifacial panels, concentrated solar power, and building-integrated photovoltaics, is examined for their efficiencies, applications, and contributions to the renewable energy landscape. Future prospects highlight promising trends such as next-generation photovoltaics, advanced energy storage solutions, agrivoltaics, floating solar farms, and artificial photosynthesis. Despite the progress, challenges related to efficiency, stability, scalability, cost, grid integration, environmental impact, policy support, and public acceptance remain. Addressing these challenges through continued research, supportive policies, and collaborative efforts is crucial for realizing the full potential of solar technology. This review underscores the importance of solar energy in achieving a sustainable future and emphasizes the need for ongoing innovation and commitment to overcome existing barriers.

Hydrokinetic energy constitutes a significant promise as a renewable energy source, yet many regions experience flow velocities insufficient to support conventional turbine installations. According to this, the present work proposes a vertical axis hydrokinetic turbine aimed to environments where conven-tional turbines may not be feasible due to insufficient water velocity. This turbine is based on a biologi-cally inspired design which improves the traditional Savonius turbine. This innovative configuration is inspired by the Fibonacci spiral. The turbine's performance was analyzed through Computational Fluid Dynamics. A notable improvement was found in comparison with the traditional Savonius turbine, providing a 15.1% increment in the power coefficient.

The Meissner effect is a special property of superconductors. In this paper, based on the characteristics of the Meissner effect, a superconducting phase transition model of a superconductor under a changing magnetic field is proposed. A thermodynamic analysis was performed on the model to calculate both the changes in the thermodynamic parameters of the superconductor during the phase transition and the changes in the overall work and energy of the model. For Model 1 in the present study, the thermodynamic energy of the superconductor was not conserved due to the phase change of the superconductor under a changing magnetic field.

As the global demand for clean and sustainable energy sources intensifies, hydrogen emerges as a promising alternative fuel. The widespread adoption of hydrogen, however, is impeded by the lack of efficient systems for storage and transportation. This review aims to summarize the recent advancements and prevailing challenges within the realm of hydrogen storage and transportation, thereby providing guidance and impetus for future research and practical applications in this domain. Through a systematic selection and analysis of the latest literature, this study highlights the strengths, limitations, and technological progress of various hydrogen storage methods, including compressed gaseous hydrogen, cryogenic liquid hydrogen, organic liquids hydrogen, solid materials hydrogen storage, as well as the feasibility, efficiency, and infrastructure requirements of different transportation modes such as pipelines, road and seaborne transportation. The findings reveal that challenges such as low storage density, high costs, and inadequate infrastructure persist despite progress in high-pressure storage and cryogenic liquefaction. The review also underscores the potential of emerging technologies and innovative concepts, including metal-organic frameworks, nanomaterials, and underground storage, along with the potential synergies with renewable energy integration and hydrogen production facilities. In conclusion, interdisciplinary collaboration, policy support, and ongoing research are essential in harnessing hydrogen’s full potential as a clean energy carrier. This review concludes that research in hydrogen storage and transportation is vital to global energy transformation and climate change mitigation.

A selective permeable membrane between two different solutions can generate osmotic pressure, Donnan potential, and ion/pH gradients based on various factors such as membrane type, solute concentration and temperature. In this study, we introduce a novel method for extracting energy from ion gradients through an innovative cycle, presenting intriguing experimental findings. Additionally, by leveraging Raoult’s Law, which describes the relationship between vapor pressure and solute presence, in conjunction with osmosis within a closed system, we successfully engineer the simplest iteration of Maxwell’s demon device. This pioneering approach to sustainable energy generation harnesses ambient temperature marking a significant advancement in energy research. Finally this renewable energy source is available all the time and everywhere.

Despite achieving over 90% household service coverage, the Latin American and Caribbean region faces energy poverty (EP) challenges, particularly in rural areas. With growing GDP and foreign investments, Panama grapples with significant energy inequality, ranking poorly in clean energy access. Almost 177,000 Panamanians experience energy poverty, impacting their quality of life. This study proposes a Multidimensional Energy Poverty Index for Panama (MEPIP), considering dimensions like lighting, cooking, food refrigeration, thermal comfort, and knowledge/communication. MEPIP, inspired by indicators from Chile, Mexico, and the UK, aims to provide a nuanced understanding of EP. Results from surveyed rural communities, Guásimo, Llano Grande Abajo, Los Aguilares, and La Tranquilla, reveal pervasive energy poverty, emphasizing the urgency of targeted interventions. MEPIP's application identifies critical areas, such as Llano Grande Abajo, highlighting stark inequalities and the need for comprehensive energy policies to address EP in Panama.

LuBO3 crystallizes in the calcite type (CaCO3) structure and is a widely applied inorganic host for luminescent materials and scintillators. Even though many scientific works have been published concerning the optical properties of rare earth doped LuBO3, so far, no study of the emission spectra as function of the excitation energy of such orthoborates has been conducted. Therefore, this work deals with the photoluminescence of RE doped LuBO3 with RE = Ce3+, Eu3+, Gd3+, or Tb3+, while an emphasize is laid on the energy dependence of these four luminescent compounds.

Energy and information are fundamental concepts that play crucial roles in the foundations of science, each contributing to different aspects of our understanding of the natural world. Here we encounter that Fisher' measure is able to link them. We also investigate some interesting relations between Fisher's information, Poisson's distribution, and thermal quantifiers in a grand canonical ensemble. These connections permit one to visualize interesting novel artifacts in statistical mechanics. We clearly see them emerge in discussing the ideal gas. For example, we encounter that the Poisson distribution is intrinsically involved in the physics of the ideal gas, and we are able to give a Fisher-estimation of the difference in informational content between the grand canonical and canonical ensembles.

Welcome to the world of bioethanol revolution, in response to the soaring global energy demand, the production of bioethanol has taken center stage, captivating the attention of governments, academia, and the private sector alike. Over the years, research in this field has witnessed exponential growth, paving the way for sustainable energy production. Ethanol, the front-runner in renewable energy, can be derived from a plethora of sources. In this abstract, we will explore the exciting advancements and emerging trends in the production of bioethanol, shedding light on the promising future of sustainable energy. Bioethanol production presents a cost-effective solution by utilizing the abundance of agricultural resources. These resources serve as the foundation for producing bioethanol from various biomass sources. In this context, we evaluate the raw materials used, including sucrose-based, starchy-based, and perennial grasses. By exploring these options, we can gain a comprehensive understanding of the diverse range of agricultural feedstocks that contribute to the production of bioethanol, this paper delves into the multiple processes involved in the production of bioethanol from agricultural base biomass, unveiling a range of possibilities for harnessing renewable energy. The key steps that were thoroughly examined include pretreatment, which encompasses both physical and chemical methods, hydrolysis, direct fermentation, and saccharification. These steps serve as crucial components in the overall bioethanol production process from agricultural base biomass. By understanding and optimizing each of these stages, we can unlock the full potential of sustainable energy generation. The paper goes beyond exploring the production processes and delves into the different generations of bioethanol, each with its unique components. Additionally, it provides a comprehensive overview of the composition of agricultural and forest residues, shedding light on their potential as valuable resources for bioethanol production. Moreover, it highlights the significance of the agricultural sector in Nigeria's economy, emphasizing the importance of energy for enhancing productivity and efficiency. The integration of bioethanol as an energy source has the potential to propel this sector forward, fostering sustainable development and contributing to the overall growth of the Nigerian economy. By harnessing the power of bioethanol, Nigeria can tap into its energy potential, promoting energy utilization and creating a positive impact on various industries.

In Nigeria, the adoption of sustainable biomass for energy generation is on the rise. One crucial factor that affects the efficiency of Biomass utilization is the moisture content. This study investigates the economic impact of moisture at different stages of the wood biomass distribution chain, considering the entire chain. The methodology employed includes a comprehensive literature review, interviews, and economic calculations. By analyzing these factors, this research aims to provide valuable insights into the economics of moisture in wood biomass, contributing to the sustainable development of the Biomass energy sector in Nigeria. Based on the outcomes of this investigation, it has been discovered that the costs associated with moisture content in Nigeria amount to approximately ₦500,000,00 (Five Hundred Thousand Naira only). Utilizing wood Biomass with a moisture content of 32% weight, as opposed to 18% weight, has proven to be more costly. Transportation contributes to a significant portion of this increase, while the reduction in burning efficiency accounts for the remaining half. To further elaborate on these findings, it is crucial to understand that the transportation costs are impacted by the additional weight and volume of biomass with higher moisture content. This necessitates the use of more fuel and resources during transportation, resulting in increased expenses. Additionally, the decreased burning efficiency associated with higher moisture content poses a challenge. It leads to reduced energy output and increased fuel consumption, ultimately impacting the overall economic viability of wood biomass as an energy source. By identifying these factors, this study aims to provide insights into the economic implications of moisture content in the wood biomass distribution chain in Nigeria. These findings can serve as a basis for developing strategies to optimize the use of biomass, reduce costs, and enhance the sustainability of the energy generation process. One of the most convenient and cost-effective solutions to reduce transportation expenses and improve combustion efficiency is through planned air drying of wood biomass. Large-scale power plants typically prefer utilizing wood biomass that has undergone air drying, resulting in a moisture content ranging from 18% to 36% by weight. By implementing planned air-drying techniques, the moisture content of wood biomass can be significantly reduced, thereby decreasing transportation costs. As the biomass becomes lighter and less bulky, transportation requirements are optimized, leading to enhanced efficiency and reduced expenses. Moreover, air-dried wood biomass offers improved combustion characteristics. The reduced moisture content allows for better heat transfer during the combustion process, resulting in higher energy output and increased fuel efficiency. This not only improves the overall economics of utilizing wood biomass but also contributes to a more sustainable and environmentally friendly energy generation system. The application of planned air drying in the wood biomass distribution chain in Nigeria can serve as a practical solution to address the economic challenges associated with moisture content. By adopting this approach, stakeholders can maximize the potential of wood biomass as a renewable energy resource while minimizing costs and promoting sustainable practices.

"Hydrogen is an extremely promising energy carrier, poised to become a commercially viable product in the coming years. However, there are significant hurdles that need to be addressed. One such challenge is the high energy consumption during the electrolysis process, which is used to produce hydrogen. Furthermore, the co-production of CO and CO2 during steam hydrocarbon reforming adds to the complexity. Finding innovative solutions to these issues is crucial for the widespread adoption of hydrogen as a clean and efficient energy source." Simultaneously, various industries have the capability to generate hydrogen as a by-product, each with differing levels of purity. For instance, sodium and chlorine production plants have the potential to produce high-purity hydrogen. On the other hand, digester and sewage gas can yield low-purity hydrogen. In both instances, there is an economic incentive to utilize this hydrogen for energy production or to inject it into existing natural gas pipelines A brief estimation of the technical potential of utilizing hydrogen from various sources in Nigeria, specifically for fuel cell usage, has been conducted. Moreover, resource potential visualization maps have been generated to help visualize the availability and distribution of these hydrogen sources throughout the country.

Energy market price volatility and an upward trajectory of prices per unit of electricity have sent all industrial sectors and many economies to the brink of recession. Alongside the urgent need for decarbonisation of all industries, achieving a higher level of energy independence across all sectors seems imperative. A multi-disciplinary approach with a proposed system of CO₂ emissions reduction and capture technologies has the potential for short-term emissions reduction to near-zero in absolute terms. The findings of this research showed CO₂ emissions reduction of ~30% from 977t of CO_2e to 684t in one single blast furnace production cycle, by switching the energy provider generating energy exclusively from renewable sources. Replacing coal with biomass (BECCS), resulted in an additional reduction of ~30%, to CO_2e to 479t CO_2e. Installing solar PV panels for energy generation on site resulted in a further ~30% reduction, to 335 tonnes CO_2e. Finally, the installation of CO₂ filters reduced the CO₂ emissions to near-zero. Simultaneously, energy-saving and process improvement measures implementation (up to 60% efficiency increase), excess heat recovery (<30% of energy savings), and retrofitting renewable energy technology resulted in an energy independence of 88%. Short-term engineering solutions, partly subsidised in the UK, are readily available.

In the quest for sustainable energy solutions, predicting electricity prices for renewable energy sources plays a pivotal role in efficient resource allocation and decision-making. This article presents a novel approach to forecasting electricity prices for renewable energy sources using deep learning models, leveraging historical data from the Power System Operator (PSE). The proposed methodology encompasses data collection, preprocessing, feature engineering, model selection, training, and evaluation. By harnessing the power of recurrent neural networks (RNNs) and other advanced deep learning architectures, the model captures intricate temporal relationships, weather patterns, and demand fluctuations that impact renewable energy prices. The study demonstrates the applicability of this approach through empirical analysis, showcasing its potential to enhance energy market predictions and aid in the transition to more sustainable energy systems. The outcomes underscore the importance of accurate renewable energy price predictions in fostering informed decision-making and facilitating the integration of renewable sources into the energy landscape. As governments worldwide prioritize renewable energy adoption, this research contributes to the arsenal of tools driving the evolution towards a cleaner and more resilient energy future.

This paper is the third application-oriented paper based on the "unified theory of forces" and also addresses the shortcomings of previous research in fully explaining the origin and nature of the weak force. The main conclusions of this paper are as follows: (1) It is argued that neutrinos are generated by the gravitational field, and their generation mechanism is similar to the radiation of photons from electron orbital transitions. Particles undergoing orbital transitions in a gravitational field will emit neutrinos. (2) We rigorously derive the energy formula for neutrinos and demonstrate that the energy formula for neutrinos does not comply with the Planck energy formula. Neutrinos with higher energy have longer wavelengths and are more easily observed in experiments.

This paper delves into the intricate interactions of photons in the realms of gravity and antigravity. Photons, being fundamental particles of light, exhibit remarkable behaviors as they traverse through the cosmos. They journey through the vast expanses of the universe until they venture into the enigmatic invisible realm. The photon's encounters with gravity and antigravity are explored in detail. When confronting the gravitational influence of massive objects, such as celestial bodies, photons neither gain nor lose energy, but they exchange momentum with the external gravitational field while steadfastly preserving their intrinsic momentum. Intriguingly, the photon's interaction with the mysterious force of antigravity, propelled by dark energy, presents an irreversible transformation. The consequences of this interaction are profound, as photons undergo a cosmic redshift of a magnitude greater than that induced by gravity or other redshift mechanisms. This distinctive effect manifests as the photon departs from the gravitational embrace of galaxies and embarks on a journey beyond their boundaries, where the domain of zero gravity commences. Furthermore, the paper elucidates the dynamics of external forces exerted by massive objects on photons during their interactions. These forces momentarily carry the photons while they engage with the massive objects. Yet, despite this external assistance, the photons maintain their original momentum. Notably, within a gravitational field, the effective deviation from this transportation remains zero, reaffirming the photon's commitment to its initial trajectory.

In the present work we consider two modified Chevallier-Polarski-Linder (CPL) models in the background of homogeneous and isotropic FLRW space-time, namely (i) the generalized CPL model (Model I) and (ii) the logarithmic form of the the equation of state for the dark energy. From the observational data sets ((Pantheon+)+BAO+HST), we find that at the present epoch (redshift $z=0$), the equation of state for the dark energy converges almost at the same value $\omega_{fld}\approx -0.86$ and the variation of $\omega_{fld}(z)$ with respect to the redshift parameter is very small for both models. we also find that the present value of the Hubble parameter $H_0$ is almost same for both the models. Finally, we compare the models in the light of Akaike, Bayesian Information Criterion (BIC) and Bayesian Evidence. However, we find that Model II is better compared to the Model I from the estimated value of the deceleration parameter.

We measure the accelerated cosmic expansion rate of the late-time Universe and derive constraints on cosmological parameters from the final baryon acoustic oscillation (BAO) uncorrelated measurements of different surveys after two decades of dedicated spectroscopic observation combined with the Pantheon sample of Type Ia supernovae, the Hubble diagram of gamma-ray bursts & quasars data, the Cosmic Chronometers data, and the recent Hubble constant value measurement from the Hubble Space Telescope and the SH0ES Team as an additional prior. In Λ cold dark matter (ΛCDM) scenario, the model fit yields Ωm=0.313±0.034 and ΩΛ=0.672±0.025. Combining BAO with CC+Pantheon+QSR+GRB data sets we get H0=69.21±1.22 km s−1 Mpc−1, rd=133.46±2.49 Mpc. For the a flat wCDM model, we get w=−1.111±0.030. For a dynamical evolution of dark energy in a flat w0waCDM cosmology, we get wa=−0.292±0.167. We apply the Akaike information criteria probe to compare the three models, and see that all models are favored and cannot be discarded from the current data.

The global agricultural sector is increasingly pressured to adopt sustainable practices and reduce its environmental impact. In this context, greenhouses play a crucial role in enabling year-round crop production, ensuring food security, and minimizing reliance on traditional open-field farming. However, the energy consumption associated with greenhouse operations poses a significant challenge to achieving sustainability goals. As a result, there is a growing emphasis on transitioning greenhouses towards near-zero energy consumption. Near-zero energy consumption in greenhouses refers to the ambitious objective of minimizing energy usage to the greatest extent possible while maintaining optimal growing conditions for crops. This goal encompasses reducing energy consumption for heating, cooling, lighting, and other operational needs, as well as exploring renewable energy sources to power greenhouse operations. This review article offers a comprehensive overview of greenhouse energy consumption, with the main goal of analyzing the present situation, identifying key challenges, exploring potential opportunities, and proposing future perspectives for decreasing energy usage in greenhouse environments. As the focus on sustainable agricultural practices grows, the need to reduce energy consumption in greenhouses becomes increasingly important. The review critically examines current technological models and strategies applied in smart greenhouse applications, as well as the monitoring of microclimatic conditions inside the greenhouse, encompassing factors such as temperature, humidity, CO2 levels, soil quality, and crop cultivation. Moreover, it aims to present existing literature that investigates the advancement of greenhouses toward achieving significant reductions in energy consumption.

Climate change refers to a wide range of changes due to unstructured economic and human activities that impact the well-being status of all living and non-living things. Many adaptation and mitigation strategies focus on climate change solutions, at the center of which is the replacement of fossil fuels or other conventional energy sources with renewables. Mainly this is a contemporary issue for economies that seek ways to grow sustainably, such as developing countries. The purpose of the present study is to review how these renewable sources might have brought benefits for environmental improvement efforts within intense economic activities. Our effort targets the case of China since its efforts for transmission to a low-carbon country attract the world's research interest, given its significance in the global economic system. Mainly, this study’s attempt is based on searching relevant literature for potential changes in limiting greenhouse and carbon dioxide emissions toward China’s economic development status. The results of this study aim to become a valuable reference for further elaboration in light of climate change strategies with measurable outcomes in the growth process.

This paper provides a comprehensive overview of the potential applications of dual energy CT (DECT) in improving image quality and diagnostic capabilities of CT arthrography (CTA) in clinical practice. The paper covers the use of virtual non contrast (VNC) images, in which the injected contrast medium is reduced from the articular cavity, in order to better analyze 2D and 3D images of the bone. Moreover , virtual monoenergetic imaging (VMI) applications and their potential use for the reduction of metal artifacts and improving image contrast are reviewed. The role of virtual non calcium (VNCa) in detecting bone marrow edema surrounding the imaged joint will be discussed. Furthermore , the role of iodine map to enhance the contrast between soft tissues, optimizing the visualization of contrast material, and to distinguish contrast material from calcifications is described. Finally, a case series including different joints is provided to underline the additional advantages of high spatial resolution dual energy CT reconstructed images.

Quantum Gravity is not sufficient to predict the properties of particles (baryonic and non-baryonic) to a great extent. So, we develop General Quantum Gravity (GQG), which is a renormalizable formalization of quantized gravity that emerges from General Relativity through a new scenario of Quantum Mechanics. Inside every observable $(3+1)D$ spacetime in this new scenario of Quantum Mechanics, there must contain an internal hidden $(n+1)D$ spacetime, which immediately yields extra hidden dimensions by a closed continuous mapping, so that the overall spacetime must acquire Supersymmetry. We have also found that Superstrings are inevitably natural and universal but hidden inside every $(3+1)D$ observable spacetime. Superstrings are found eleven-dimensional (rather than lower dimensional) within this quantum spacetime. Consequently, eleven-dimensional Supergravity is necessarily a natural phenomenon within the GQG spacetime. GQG is formalized here in two different aspects. The first one gives an Einstein field equation in a semi-quantum Minkowski spacetime with semi-quantum Lorentzian metric tensor, whereas, the second one yields a purely Quantum Mechanical Einstein field equation in a quantum non-Minkowski spacetime with non-Lorentzian metric tensor. Dark Energy (as well as Dark Matter) appears from GQG quite naturally. We develop here Gravitational Electroweak Dark Energy interactions, where gravity and Dark Energy are allowed to combine with electroweak symmetry. Likewise, in Gravitational Chromodynamic Dark Energy interactions, we combine QCD with gravitational and Dark Energy symmetries. In a Dark Matter gauge symmetry model, we combine Dark matter with all possible gauge symmetries. A Universal Model $SU(7)_{UM}$ combines entire baryonic and non-baryonic particle interactions all together.

The temperature-dependent energy storage properties of four tungsten bronze phase compounds are studied together with an investigation of their structure and temperature-dependent permittivity response, i.e., Ba6Ti2Nb8O30 (BTN), Ba6Zr2Nb8O30 (BZN), Sr3TiNb4O15 (STN) and Sr3ZrNb4O15 (SZN) ceramics. It was found that BZN has smaller grains and a more porous structure than BTN. SZN shows no clear grain boundaries with the most porous structure among all samples, exhibiting a much lower permittivity response than other samples with no signs of phase transitions from room temperature to 400 °C. Though the energy storage response of those samples is generally quite low, it exhibits rather good temperature stability. It was suggested that by obtaining a denser structure through chemical modification or other methods, those tungsten bronze ceramics with good temperature stability could be promising as energy storage devices when improved energy storage properties are achieved.

Green investors have expressed concerns about the environment and sustainability due to the high energy consumption involved in cryptocurrency mining and transactions. This article investigates the safe haven characteristics of clean energy stock indexes in relation to 3 cryptocurrencies, taking into account their respective levels of "dirty" energy consumption from May 16, 2018, to May 15, 2023. By virtue of analyzing a tumultuous era in the global economy, the level of integration between clean energy stock indexes and cryptocurrencies will be inferred by using Gregory and Hansen's methodology. Furthermore, to assess the presence of a volatility spillover effect between clean energy stock indexes and “dirty-classified” cryptocurrencies, the ?-test of heteroscedasticity of two samples from Forbes and Rigobon will be employed. The empirical findings show that clean energy stock indexes may offer a viable safe haven for dirty energy cryptocurrencies. However, the precise associations differ depending on the cryptocurrency under examination. The implications of the study's results are significant for investment strategies, this knowledge can inform decision-making procedures and facilitate the adoption of sustainable investment practices. Investors and policymakers can gain a deeper understanding of the interplay between investments in renewable energy and the cryptocurrency market.

The paper is based on the research project P2Endure funded within the H2020-EE-2016-2017 call. The main aim of the research is to propose innovative solutions for deep renovation that are applicable and replicable for the widest range of building typologies, from public to residential and historic buildings. In this paper, the methodology adopted to perform the energy analyses and to verify the achievement of the expected targets in terms of savings is defined, based on a range of real case studies. The main aim is to promote a guideline for designers showing specific instruments to perform towards the attainment of the 60% threshold of the energy savings giving advice on how to further improve the energy performance of the buildings, basing on the overview of the energy analyses run for similar cases.

The thermal insulation properties of building walls are critical to the overall energy efficiency and comfort of a building. One important factor that can affect these properties is the type of bricks used in construction. Bricks can vary in their geometry and thermal coefficient, which can impact their ability to transfer heat through the wall. The geometry of a brick can affect its thermal properties by altering the amount of air trapped within it and the surface area available for heat transfer. Hollow bricks or those with complex geometries may have lower thermal conductivity than regular solid bricks due to the air pockets trapped within them. Conversely, larger surface areas on the exterior of the brick can increase heat transfer. The thermal coefficient of clay, a common material used in brick production, is another important factor. Clay has a relatively low thermal conductivity, meaning it is a poor conductor of heat. However, the quality of the clay, as well as the firing temperature and duration used in brick production, can impact its thermal coefficient. Higher firing temperatures and longer firing times can result in a more compact and dense clay brick, which can improve its thermal properties. In summary, the thermal insulation properties of building walls can be significantly affected by the type of bricks used in their construction. It is important to consider the geometry and thermal coefficient of the bricks when designing a building to achieve the desired level of thermal insulation. By selecting bricks with appropriate properties, designers can help to improve the energy efficiency and comfort of the building while reducing its environmental impact.

This paper is another applied article based on the author's "Unified Theory of Force". The main work of this paper is as follows: (1) Reinterpretation of the Lorentz contraction effect and rigorous proof that the Lorentz contraction is a physical phenomenon based on the conservation of energy and momentum under non-completely symmetrical relative motion effects. This paper proves that the Lorentz contraction effect not only occurs in the direction of motion but also simultaneously in any direction. (2) For the first time, we attempted to explain the physical meaning of the Planck energy formula in theory and associate the Planck energy formula with the Lorentz contraction effect, which can help us to have a deeper understanding of the true physical meaning behind the Planck energy formula. At the same time, we also made reasonable theoretical predictions about the basic structure of photons.

Energy, with very low demand and replacement elasticity, is a key component of production as well as a good for consumption. Inflation as a whole is instantly impacted by rising energy prices. After lockdowns were lifted in 2020–2021 and the global economy started to recover, oil prices began to rise. This trend continued with escalating geopolitical tensions and the eventual crisis in Ukraine brought on by Russia's invasion in February 2022. The current paper examines how the tourism industry has been impacted by rising energy commodity prices from the perspectives of travelers and hotel managers. Hereby a qualitative and a quantitative process is being used for a thorough examination of the consequences of inflated prices. More specifically, the three methods which were used are: descriptive analysis, correlation matrices and regression analysis. For the latter, all models appear to explain well the variation of the variables and provide reliable results. This study concludes that, although the overall inflation caused by higher energy prices was impactful for the individuals as well as for the businesses, however the touristic season of 2023 is expected to be one of the most fruitful ones yet, especially for the Greek economy, since strong numbers are reported (in revenues, expenditure and percentage of expected guests), while tourists are seemingly not willing to sacrifice their holidays altogether, but make other modifications in their lifestyle and choices. Finally, it is important to stress that governments should start integrating sustainable energy as a key component.

Power generation using renewable technologies has become a primordial option to satisfy the energy demand all over the world, being solar concentrating technologies widely applied for this purpose. A combination of Parabolic Trough Collector with Direct Steam Generation has been considered an excellent option for power generation, due to the economic cost and complexity in the plant are reduced. The thermal evaluation of the solar power plant as well as the PTC in the DSG process is very important in viability and economic analysis. In this sense, as the main objective of this work, a numerical tool for evaluating DSG with PTC technology has been developed. The software SOLEEC is a versatile, reliable, accurate and friendly to the user for thermally evaluating a DSG with PTC technology. The user has the possibility to compare the thermal behavior of different geometrical dimensions for a PTC; and even consider different materials; in order to satisfy the demand of superheated steam by a DSG process. The software has an error less than 5% when compared with literature results and in this paper is used to evaluate a power plant in Mexico obtaining that the change to DSG proposing different PTC could reduce the solar field about 35%.

During the last 50 years, an interdisciplinary approach in research in various scientific fields has become widely spread. This process significantly deepens and widens our scientific knowledge, but on the other hand makes more difficult choosing a discipline to be used by students and young researchers. The dynamic development of science makes this choice even harder. There is a widely spread opinion that thermodynamics uses a rigorous mathematical apparatus. This paper describes that knowledge of the fundamental principles of thermodynamics is required for deep understanding of crucial biological processes. Thus the effort put into learning classical and nonequilibrium thermodynamics does not make harder, but easier gaining a better knowledge of biological processes. This essay is an attempt to convey personal experience in using thermodynamics to describe biological systems and processes they perform.

This research presents a maximum power point tracking of traditional single-ended primary converter (SEPIC) with the aid of fuzzy logic controller (FLC) for regulating the voltage and perturbation and observation(P&O) algorithms for regulating the reference voltage and reaching the maximum power point tracking. This is a promising technique for the conventional SEPIC converter to achieve maximum power point tracking with much less error. Moreover, the method is simple, reliable, and understandable for photovoltaic systems.

Although train simulation research is vast, most available network simulators do not track the instantaneous movements and interactions of multiple trains for the computation of energy/fuel consumption. In this paper, we introduce the NeTrainSim simulator for heavy long-haul freight trains on a network of multiple intersecting tracks. Trains are modeled as a series of moving mass points (each car/locomotive is modeled as a point mass) while ensuring safe following distances between them. The simulator considers the motion of the train as a whole and neglects the relative movements between the train cars/locomotives. Furthermore, the powers of the different locomotives are transferred to the first locomotive as such a simplification result in a reduced simulation time without impacting the accuracy of energy consumption estimates. While the different tractive forces are combined, the resistive forces are calculated at their corresponding locations. The output files of the simulator contain pertaining information to the train trajectories and the instantaneous energy consumption levels. A summary file is also provided with the total energy consumed for the full trip and the entire network of trains. Two case studies are conducted to demonstrate the performance of the simulator. The first case study validates the model by comparing the output of NeTrainSim to empirical trajectory data using a basic single-train network. The results confirm that the simulated trajectory is precise enough to estimate the electric energy consumption of the train. The second case study demonstrates the train-following model considering six trains following each other. The results showcase the model’s ability in relation to maintaining safe-following distances between successive trains. Finally, the NeTrainSim is demonstrated to be scalable with computational times of O(n) for less than 50 trains (n) and O(n²) for higher number of trains.

he present experiment concerns deposition of ZnO by ALD and subsequent growth of nanowires by chemical bath. We used a novel AISI 301 steel substrate with mechanical parameters that make it suitable to use as a piezoelectric component in an energy harvesting device. We found out that a thin layer of another oxide below ZnO provides outstanding adhesion. Without it, ZnO exhibits island growth and is mechanically unstable. Such prepared samples were placed under repeated mechanical stress. They showed a piezoelectric signal which is stable after hundreds of actuations. This shows good promise for use of our device based on ZnO, an earth-abundant and non-toxic material, as an alternative to widespread in piezo components but environmentally unfriendly PZT. The piezo layers generated enough power for operations performed by a IoT chip. The designed measurement setup allowed for the demonstration of an application of AISI 301 steel substrate coated with ZnO by atomic layer and chemical bath deposition techniques as a piezoelectric component capable of generating energies usable in Internet of Things applications.

The dark energy from virtual gravitons is consistent with observational data on supernova with the same accuracy as the CDM model. The fact that virtual gravitons are capable of producing of a de Sitter accelerated expansion of the FLRW universe was established in 2008 (see references). The combination of conformal non–invariance with zero rest mass of gravitons (unique properties of the gravitational field) leads to the appearance of graviton dark energy in a mater-dominated era. Тhis fact explains the relatively recent appearance of the dark energy and answers the question “Why now?”. The transition redshifts (where deceleration is replaced by acceleration) that follow from the graviton theory are consistent with model independent transition redshifts derived from observational data. Prospects for testing the GCDM model (the graviton model of dark energy where G stands for gravitons) and comparison with the CDM model are discussed.

We present a Quantum Space Model (QSM) of the evolution of the universe based on the theory that space consists of energy quanta from which it began. We used the Friedmann equations to trace its history and show that Dark Energy is the energy of space which caused its accelerating expansion.The universe started from a quanta of space which was triggered by quantum fluctuations that caused the Big Bang. It then expanded and cooled undergoing phase transitions to radiation, fundamental particles, and matter. Matter grew into galaxies, and was consolidated by gravity into Black Holes, ending in a Big Crunch and Deep Freeze inside a Black hole at 1.380 trillion years. Fluctuations caused a new Bang to start another cycle in its life. If the Law of Conservation of Energy is universal, then the cosmos is eternal. Our results support the theoretical predictions of a cyclic universe by Steinhardt and associates, as well as Penrose. Space and energy are equivalent as embodied in the Planck energy equation. They are the two most fundamental quantities that govern cosmic evolution. The two principal long range forces are the gravitational force and the space force,which maybe the fifth force in the universe. They provide the clockwork mechanism operating our cyclic universe.

The conversion of methane into chemicals is of interest to achieve a decarbonized future. Fuel cells are electrochemical devices commonly used to obtain electrical energy, but can be utilized either for chemicals production or both energy and chemicals cogeneration. In this work, the partial oxidation of methane in fuel cells for electricity generation and valuable chemicals production at the same time is reviewed. For this purpose, different types of methane-fed fuel cells, both low temperature fuel cells, such as PEMFCs and AAEMFCs, and high temperature fuel cells, such as SOFCs, have been used. Also if few works have been devoted to this topic, the promising results drive the development of fuel cells using methane as the source for the cogeneration of power and valuable chemicals.

Controlling the ratio of capacitance and power of supercapacitors by changing the composition of the electrodes will allow to create optimal power systems for specific applications. For the formation of such electrodes, a method is required that combines the possibilities of creating a multicomponent composite with a high degree of uniformity of composition and morphology over the layer thickness. An example of such a method can be the eco-friendly method of electrophoretic deposition used in this work, which makes it possible to locally deposit a composite material from multicomponent suspensions at room temperature. We present an approach related to electrophoretic deposition from a suspension of composite material SuperC-RuO 2 , in which the ratio of the components can be changed to vary the proportion of electrochemical and electrical double layer storage. Nanocarbon, which has a large surface area, and ruthenium oxide with a significant electrochemical capacity, in combination, will allow combining high power and capacity in one device, and their ratio will determine the proportion of electrochemical and electrical double layer storage. In this work, approaches are investigated and recommendations are given for increasing the stability of suspensions, the effect of the composition of the suspension on the composition of composite electrodes and their capacitive and power characteristics is determined.

The main aim of this study is to identify inhibitory binding potent of the available commercially alkaloids, against the crystal structure of acetylcholinesterase (AChE) protein by in silico studies. The inhibitory data of the compounds should be compared with the internal ligand as well as standard AChE inhibitor Aricept (which is used for the treatment of all stages of Alzheimer’s disease). AutoDock 4.0 is used for the docking study, conformational orientation site analysis, and, with the help of docking, we have calculated parameters like binding energy and inhibition constant. Docking's study showed that Glabridin, Isorosmanol, Quercetin, Honokiol, Eckol, Sargaquinoic acid, and Ginsedosides revealed strong binding affinity with the enzyme. Moreover, The ADMET profiling and physicochemical properties of the selected compounds are evaluated using the Molinspiration and Data warrior software. By showing a strong binding affinity value, positive bioactivity score, and good pharmacokinetic properties, the top compound was determined. After evaluation with all parameters, the compound Glabridin and Ginsedosides show the most potent inhibitory effect towards the acetylcholinesterase, so this compound could be used as a novel is required to treat Alzheimer's disease.

Metabolic flexibility is the ability of an organism to adapt its energy source based on nutrient availability and energy requirements. In humans, this ability has been linked to cardio-metabolic health and healthy aging. Genome-scale metabolic models have been employed to simulate metabolic flexibility by computing the Respiratory Quotient (RQ), which is defined as the ratio of carbon dioxide produced to oxygen consumed, and varies between values of 0.7 for pure fat metabolism and 1.0 for pure carbohydrate metabolism. While the nutritional determinants of metabolic flexibility are known, the role of low energy expenditure and sedentary behavior in the development of metabolic inflexibility is less studied. In this study we present a new description of metabolic flexibility in genome-scale metabolic models which accounts for energy expenditure, and we study the interactions between physical activity and nutrition in a set of patient-derived models of skeletal muscle metabolism in older adults. The simulations show that fuel choice is sensitive to ATP consumption rate in all models tested. The ability to adapt fuel utilization to energy demands is an intrinsic property of the metabolic network

Cyprus plans to drastically increase the share of renewable energy sources from 13.9% in 2020 to 22.9% in 2030. Solar energy can play a key role in the effort to fulfil this goal. The potential for production of solar energy over the island is much higher than most of European territory because of the low latitude of the island and the nearly cloudless summers. In this study, high quality and fine resolution satellite retrievals of aerosols and dust, from the newly developed MIDAS climatology, as well as information for clouds from CMSAF are used in order to quantify the effects of aerosols, dust, and clouds on the levels of surface solar radiation (SSR) and the corresponding financial loss for different types of installations for production of solar energy. An SSR climatology has been also developed based on the above information. Ground-based measurements were also incorporated to study the contribution of different species to the aerosol mixture and the effects of day-to-day variability of aerosols on SSR. Aerosols attenuate 5 – 10% of annual GHI and 15 – 35% of annual DNI, while clouds attenuate ~25 – 30% and 35 – 50% respectively. Dust is responsible for 30 – 50% of the overall attenuation by aerosols.

Research Highlights: (1) Reed canary grass (RCG) is analysed in Sweden compared to willow and poplar for 2001-2020 (2) Each crop presents a different land-use and climatic profile (3) Average yield records of reed canary grass are similar to willow and poplar (4) There are divergences between trial-based and commercial yields (5) Existing LUC patterns suggest meadow>RCG and RCG>cereal (6) RCG land area is very sensitive to policy incentives. Background and objectives: RCG is an alternative crop for biomass-to-energy due to high yield and frost tolerance. We assess the cultivation in Sweden by using an extensive compilation of data, with emphasis on the extension of the cultivation, areas planted, climatic profile, land use patterns and yield levels. Material and methods: All RCG plantations are analysed for 2001-2020. A geostatistical analysis is performed to characterize where is cultivated and the land uses associated. Climatic, productivity and yield profiles are compared to willow and poplar plantations, from experiments and from commercial plantations. Results: The results show that the cultivation of reed canary grass expanded after 2005, with a maximum of 800 ha in 2009 to then decrease to the current levels of about 550 ha. It is mainly grown in colder climatic areas, with lower agricultural productivity than willow and poplar. Mean yields from trials are 6 odt ha-1 yr-1; commercial yields are 3.5 odt ha-1 yr-1. RCG replace meadow land and is replaced by cereals, when abandoned. Conclusions: Reed canary grass is an interesting alternative, growing on colder areas but on similar yield levels than other energy crops. The cultivation is more sensitive to policy incentives

Energy demand has been overgrowing in developing countries. Moreover, the fluctuation of fuel prices is a primary concern faced by many countries that highly rely on conventional power generation to meet the load demand. Hence, the need to use alternative resources such as renewable energy is crucial to mitigate fossil fuel dependency alongside the reduction of Carbon Dioxide emission. Algeria’s being the largest county in Africa has rapid growth in energy demand since the past decade due to the significant increase of residential, commercial, and industry sectors. Currently, the hydrocarbon-rich nation highly dependent on fossil fuels for electricity generation, where renewable energy only has a small contribution to the country’s energy mix. However, the country has massive potential for renewable energy generations such as solar, wind, biomass, geothermal, and hydropower. Therefore, the government aims to diversify away from fossil fuel and promoting renewable energy generations through policies and renewable energy-related programs. The country’s Renewable Energy and Energy Efficiency Development Plan focuses on large scale solar, wind generation as well as geothermal and biomass technologies. This paper provides an update on the current energy position and renewable energy status in Algeria. Moreover, this paper discusses RE policies and programs that aim to increase the country’s renewable energy generation and its implementation status.

In the same manner that there are several statements of the second law of thermodynamics but all of them are equivalent, it is possible that most of the entropic methods applied to the nervous system and brain in particular share a similar outcome, or essence, that helps understand some aspects of the fundamentals of basic neurodynamics. In this short review focused on certain aspects of the entropic metrics some results are examined that indicate the fundamental importance of the natural tendency towards a maximal energy distribution for healthy brain activity and thus cognition to emerge.

Stellar heated gas and dust makes a significant entropic/information energy contribution to the universe. At temperatures ~10⁷ the ~10⁸⁶ bits are equivalent to ~10⁷⁰J, equivalent to the energy equivalence of the universe’s ~10⁵³ kg ordinary baryon matter. A survey of stellar mass density measurements shows this dark energy contribution has a constant energy density that effectively mimics a cosmological constant over the redshift range z<1.35. The measurable difference between this information energy and a true cosmological constant is small, with a maximum difference of <2% in Hubble parameter at z~2. As information energy is significant and co-located with hot baryons it produces gravitational effects that resemble dark matter. Information energy is shown to be consistent with the dark matter effects observed in clusters of colliding galaxies (e.g. Bullet Cluster), with dark matter location specified by baryon location and strongest in regions of highest luminosity / temperature. The dark matter fraction measured in galaxy surveys more closely fits an information energy explanation than the fraction expected in the standard ɅCDM model. Information energy provides a solution to the cosmological coincidence problem and also would allow the cosmological constant to take the preferred zero value.

The present article discusses the institutional model adopted in Brazil regarding energy production through biomass. The theoretical-empirical method is used to conclude that the model's difficulties can be overcome by adopting a network of contracts capable of subjecting renewable energy generation to an energy compensation model.

The high consumption of firewood in Honduras requires the search for alternatives that reduce its negative effects on health, economy, and the environment. One of these alternatives has been the promotion of improved cooking stoves, which achieve a large reduction in firewood consumption. This paper shows a cost-benefit analysis for an improved cooking stove adoption strategy for Honduras. The methodology uses the Long-range Energy Alternatives Planning System, LEAP, a tool globally used in the analysis and formulation of energy policies and strategies. The energy model considers the demand for firewood as well as the gradual introduction of improved cooking stoves, according to premises of a National Strategy. Hence, it is demonstrated that the costs of implementing this adoption strategy are lower than the costs of not implementing it, taking into consideration various scenarios up to and including the year 2030.

Through history, particular attention has been paid of the study of the relationship between the energy use and the city structure. Improving energy efficiency in modern agglomerations is the most promising means to mitigate climate change and its impacts. In this current context of globalisation, European Union proposes initiatives and policy targets to rethink the urban development strategies towards the ‘zero energy objectives’. Providing a methodological approach with a simulation district analysis, the present article summarizes how the ‘zero energy’ challenge is analyzed in an existing district (Epinlieu) to articulate the users’ requirements in energy. This study contributes to the scientific discussion of the districts’ urban structure and energy planning by establishing a linkage among the beneficial influence of the KPIs of the districts’ form to increase their energy efficiency and its application in a real case study in Belgium.