Vibrio vulnificus (Vv) is a bacterial pathogen native to warm and brackish water ecosystems that can cause fatal septicemia (Vv-vibriosis) in humans and various farmed fish species. From a One Health perspective, controlling Vv-vibriosis outbreaks on farms is essential not only for animal but also for human health, as it reduces the risk of Vv transmission to humans. Electrolyzed water (EW) is a sustainable control method, exhibiting transient disinfectant properties due to the formation of hypochlorous acid (HOCl). We hypothesized that EW could effectively reduce Vv populations in aquaculture facilities, preventing outbreak emergence. To test this hypothesis, survival assays in EW were conducted under varying conditions of salinity, pH, and free available chlorine (FAC). The results indicated that an intermediate concentration of FAC had a significant bactericidal effect on Vv populations regardless of the condition and tested strain. Consequently, the strategic use of EW could serve as an eco-friendly preventive and control measure against Vv-vibriosis by significantly decreasing the bacterial load in farm water.

Background and aims: In recent years, a possible connection between HLA-Cw6 and a distinctive cardiometabolic (CM) profile in patients with psoriatic disease (PsD) has been proposed, although there is still little support for this. Our aim was to further investigate this possible association by studying a large population of PsD patients. Methods: For this study, three different cohorts of patients with PsD were analyzed: two with a majority of cutaneous psoriasis, pooled n: 600, and a third with only psoriatic arthritis -PsA- cases, n: 340. Potential relationships between HLA-Cw6 and the different CM risk factors (hypertension, diabetes, obesity, dyslipidemia) were analyzed using univariate and multivariate regression models, while the final net effect was assessed using fixed- or random-effects meta-analyses, as appropriate. Results: In the PsA cohort, no association was detected between HLA-Cw6 carriership and any of the CM comorbidity factors. In psoriasis cohorts, after correcting for age, sex, disease duration and arthritis, HLA-Cw6 carriers reduced diabetes risk (OR 0.49, 95%CI: 0.26-0.91, p = 0.026). This latter effect was confirmed by a fixed-effects meta-analysis of the included cohorts (pooled OR: 0.50, 95%CI: 0.27-0.90). Conclusion: This work demonstrates a potential protective effect of the HLA-Cw6 allele on the risk of diabetes in PsD. Our findings together with those of others seem to confirm the existence of a novel HLA-Cw6-linked cardiometabolic endotype in this disease.

Soil carbon (C) cycling under anoxic conditions is mechanistically linked to dissimilatory iron (Fe) reduction, which could be regulated by exogenous dissolved organic matter (DOM). However, the impact of complex exogenous DOM on soil microbial activity and C-Fe coupling in paddy soils remains underexplored. With a 100-day microcosm experiment, we determined that the molecular composition of DOM derived from organic fertilizers and biochar on paddy soil affects soil microbial community, Fe reduction, and C emissions. Our results indicated that biochar-DOM significantly promoted Fe reduction and accelerated CH₄ and CO₂ emissions, and organic manure-DOM increased soil CO₂ emissions, which was closely related to the molecular composition of exogenous DOM. DOM molecules with high aromaticity (AI_mod) and high DBE, including lignins-vascular plant-derived polyphenols, lignins-polycyclic aromatics (PA), and condensed aromatics-PA, promoted soil Fe reduction and CH₄ emissions by enriching soil Fe-reducing bacteria (FeRB), reducing methanotrophs, and facilitating r-strategists at the early stage of incubation. Conversely, DOMs with low AI_mod, low DBE and high H/C, such as lignins-highly unsaturated and phenolic compounds and proteins-aliphatic compounds, enhanced CO₂ emissions by facilitating recalcitrant C degradation and CH₄ oxidation at the late stage of incubation. In conclusion, our study highlights the importance of the molecular composition of DOMs derived from organic amendments in regulating soil Fe reduction and C emissions. The findings offer novel insights into the effective utilization of agricultural resources and the mitigation of soil C emissions.

The increasing frequency and intensity of wildfires necessitate innovative solutions to enhance firefighting capabilities. This review provides a comprehensive evaluation of vehicles specifically designed for direct forest fire suppression, focusing on their speed of fire response, and encompasses both ground and aerial units. The study explores the functionality and speed capacity of various fire suppression vehicles, including fire trucks, firefighting aircrafts and helicopters, robotic firefighting vehicles and uncrewed aerial vehicles (UAVs). Key features such as mobility, water capacity, and advanced technologies including Artificial Intelligence (AI)-driven navigation and remote sensing capabilities are evaluated. The review also addresses the operational challenges these vehicles face in wildland environments. Additionally, it identifies emerging trends and innovations in fire suppression vehicle technology, offering insights into future developments that aim to enhance the effectiveness and safety of firefighting operations in forest fires. This overview aims to serve as a valuable resource for researchers, fire departments, and emergency response planners focused on advancing fire suppression strategies in forest.

Living processes are integral to open systems for multiple reasons. From a thermodynamic perspective, they reduce local entropy at the cost of increasing environmental entropy. Furthermore, these processes are inherently nonlinear owing to their feedback interactions with the environment. Nonlinear systems exhibit diverse behaviours: some stabilize at a constant value, whereas others display bifurcations and chaotic dynamics. This study introduces a model that describes living processes as the dynamics of nonlinear single-value diverging maps, whereas chaotic evolution is associated with the increasing entropy environment. This model enables us to describe the lifetime of different species simply by varying the model parameters. This model also simplifies explaining the transition from life to death.

Suppose n ∈ N. We wish to meaningfully average ‘sophisticated’ unbounded sets (i.e., sets with positive n-d Hausdorff measure, in any n-d box of the n-d plane, where the measures don’t equal the area of the boxes). We do this by taking the most generalized, satisfying extension of the expected value, w.r.t the Hausdorff measure in its dimension, on bounded sets which takes finite values only. As of now, I’m unable to solve this due to limited knowledge of advanced math and most people are too busy to help. Therefore, I’m wondering if anyone knows a research paper which solves my doubts.

NongXiangXing Baijiu (NBJ) is produced using a solid-state fermentation system, but the impact of stratified fermented grains on fermentation remains unclear. Therefore, in a typical distillery plant, we evaluated the physical and chemical composition, volatile compound profile, and microbial community of fermented grains in NBJ both above (FG-A) and below (FG-B) the Huangshui line. Significant differences in fermentation parameters between FG-A and FG-B were observed after 30 days of fermentation (P < 0.05). Additionally, the partial least squares projection to latent structure discriminant analysis (PLS-DA) revealed distinct differences in volatile compounds between FG-B and FG-A, identifying 26 discriminant markers. The diversity of short-chain fatty acids (SCFAs) and their esters was higher in FG-B compared to FG-A. Furthermore, microbial diversity and abundance differed significantly between the two layers of fermented grains (P < 0.05). Correlation and pathway enrichment analyses indicated that the higher SCFA content in FG-B could be attributed to the greater abundance of acid-producing microorganisms compared to FG-A. This study highlights the differences between the two layers of fermented grains in NBJ fermentation, offering new insights into solid-state fermentation and expanding the current understanding of the traditional NBJ fermentation process.

Background: Having a laboratory renal profile for medical imaging examinations requiring contrast media (CM) administration is strongly advised. Creatinine helps identify patients at risk of contrast-induced nephropathy (CIN). GEM® Premier™ ChemSTAT (Werfen) is a point-of-care (POC) analyzer with 12 emergency parameters including creatinine assay. The aim of this study consists to compare ChemSTAT with the central analytical solution of the University Hospital of Clermont-Ferrand and to evaluate the interest of the POC creatinine in the emergency department (ED) in optimizing the flow of patients, especially if CM used. Methods: More than 200 whole blood (WB) samples from the ED were evaluated on the ChemSTAT analyzer. As comparative methods, the plasma aliquots from the same samples were assayed on an Atellica® CH (Siemens Healthineers). The clinical concordance was assessed ac-cording the decision cut-offs of the French Society of Radiology for the risk of CIN. The availability times of biological results between ChemSTAT and the central laboratory were studied. Results: WB results from ChemSTAT correlated well with those from Atellica® CH, except for tCO2 (known bias between Siemens and Cobas Roche methods predicting ChemSTAT values). The results of creatinine assay allow to have identical medical decisions compared to the renal risk cut-offs. The availability of biological results is reduced by 50 min on average with ChemSTAT vs the central laboratory. Computed tomography was performed for 44.7% of patients including the injection of the CM in 68% of cases. For these patients, the availability of creatinine results relative to imaging time is faster with the ChemSTAT on average of 45.2 min. Conclusions: Great analytical and clinical correlations for creatinine assay allow safe iden-tification of patients at risk of CIN and improve patient flow in ED especially for those requiring computed tomography with use of CM.

This paper addresses the growing concerns surrounding cloud computing security and highlights key strategies for ensuring the privacy and protection of data in information-critical industries. Cloud computing has revolutionized the field of information technology, providing convenience and efficiency in data processing. However, it has also brought to light significant challenges in terms of data security and privacy. Given the rise in cyber threats and the potential risks associated with storing sensitive information on cloud servers, critical industries such as healthcare and banking have been hesitant to adopt cloud computing as a trusted solution for their data needs. This work examines the specific security concerns that these industries face and proposes measures to mitigate them. Further, the paper explores the barriers that hinder the adoption of cloud computing in critical industries and offers solutions to address these concerns.

Background: To investigate the association between enteral feeding and the risk of pneumonia in critical care adult patients. Methods: An updated literature review of studies discussing between 2016 and 2023. CINAHL, Cochrane, Embase, PubMed, Scopus, and Web of science databases were used to explore studies regarding our subject, the association between enteral feeding and the risk of pneumonia in critical care adults. Results: Enteral nutrition (EN) has been linked to a significant reduction in pneumonia, as well as shorter ICU or hospital stays, and decreased mechanical-ventilation duration in numerous studies. Conversely, pneumonia risk and other infections, as well as the fatality rate, has been found to increase with EN. Early initiation of EN within 48 hours, along with a low-calorie diet containing (< 600 Kcal/day) demonstrated a notable decrease in the occurrence of Ventilator-Associated Pneumonia (VAP) when contrasted with delayed EN and a high-calorie diet. EN was associated with a marked decrease in adverse events including aspiration pneumonia, emesis, and the escalation of respiratory support. Conclusion: EN is safe and effective in critically ill patients. It is advisable for future research to investigate the monitoring of larger sample sizes to ascertain the most effective feeding methods in the intensive care unit.

As a critical component of electric vehicles, the powertrain has a significant impact on the overall performance of the vehicle. In addressing the challenge of lengthy testing cycles, this study develops a para model of the powertrain utilizing digital twin (DT) technology, thereby establishing a framework for simulation testing of multi-controller intermodulation. The research conducts functional definition coverage testing through the design of specific functional requirement use cases, and it validates the failure mechanism via fault injection use cases. The results indicate that the DT testing platform can effectively simulate the operational interactions among various controllers within the powertrain system. In comparison to traditional field testing, the digital twin-based testing methodology offers enhanced operational efficiency and allows for the examination of testing conditions that are impractical to implement in real vehicles, particularly in the context of fault injection testing, thus facilitating the early detection of potential safety risks within the system. The advancement of this technical solution holds significant practical implications for the future mass production and development of electric vehicles.

The rapid development of specific-purpose Large Language Models (LLMs), such as Med-PaLM, MEDITRON-70B, and Med-Gemini, has significantly impacted healthcare, offering unprecedented capabilities in clinical decision support, diagnostics, and personalized health monitoring. This paper reviews the advancements in medicine-specific LLMs, the integration of Retrieval-Augmented Generation (RAG) and prompt engineering, and their applications in improving diagnostic accuracy and educational utility. Despite the potential, these technologies present challenges, including bias, hallucinations, and the need for robust safety protocols. The paper also discusses the regulatory and ethical considerations necessary for integrating these models into mainstream healthcare. By examining current studies and developments, this paper aims to provide a comprehensive overview of the state of LLMs in medicine and highlight the future directions for research and application. The study concludes that while LLMs hold immense potential, their safe and effective integration into clinical practice requires rigorous testing, ongoing evaluation, and continuous collaboration among stakeholders.

The purpose of this paper is to show how the self-exciting threshold autoregressive (SETAR) model could be an appropriate econometric framework for characterizing the dynamics of the U.S. public debt/GDP ratio after the Bretton Woods collapse. Our preferred SETAR specifications are capable in capturing the main stylized facts of the U.S. public debt/GDP ratio between 1974 and 2024. In addition, the estimated SETAR models are consistent with several theoretical frameworks that seek to explain the behavior of the U.S. public debt/GDP ratio before and after the Global Financial Crisis (GFC). Finally, the paper provides some arguments on why the previous studies that use the exponential smooth threshold autoregressive (ESTAR) models, or SETAR-type models for the first differences of the U.S. public debt/GDP ratio, are potentially mis-specified, both on econometric and economic grounds.

Reminding the courier through wearable artificial intelligence devices to prevent accidents is not only beneficial to the courier's safety but also will save a lot of insurance premiums for express companies, therefore, it is worth investigating what factors can influence the acceptance of wearable artificial intelligence devices by couriers. Push-pull-mooring (PPM) theory and affective event theory (AET) are integrated to test couriers’ adoption to wearable safety detection devices. Social influence, perceived security, personal innovativeness and affective event reaction are applied to research model. Questionnaires are distributed among several listed express companies and 263 valid questionnaires are used for empirical test. Empirical results indicated that social influence, perceived safety, personal innovativeness and affective event reaction are positively related to usage with coefficients 0.218, 0.301, 0.698 and 0.309. Personal innovativeness has positively moderating effects on relationships between affective event reaction, perceived security and usage with coefficients 0.145 and 0.106, whereas has no significant moderating effect on relationship between social influence and usage. The research aims to help support the proliferation and adoption of wearable artificial intelligence devices to optimize the current state of the express industry and improve the interaction between couriers and managers, creating an active management strategy that will allow express companies to thrive. This study can help express companies reduce insurance costs and therefore reduce the premium pricing of insurance companies for the courier industry.. This study also provides design suggestions for the application of wearable artificial intelligence devices based on chat GPT in various working conditions.

This paper provides a thorough examination of important themes critical to understanding and tackling modern cyber threats. It explores the revolutionary significance of AI and machine learning in cybersecurity, emphasizing their dynamic influence on defense systems. It also addresses how zero-trust designs have caused a paradigm change in network security, highlighting the significance of trust verification in current cybersecurity frameworks. Furthermore, the article investigates the integration of cybersecurity with corporate strategy, arguing for a collaborative approach to efficiently mitigating risks while minimizing operational impact. Furthermore, it investigates the idea of cyber resilience, highlighting an organization's ability to recover from assaults and adapt to changing threats. Furthermore, the paper discusses the issues faced by deepfakes in the synthetic media revolution and emphasizes the rising worry about data privacy in the digital era. Finally, it looks into the introduction of behavioral biometrics as a possible way to improve authentication and security methods. This paper contributes to the discussion of effective tactics for mitigating cyber threats in today's digital ecosystem by providing a thorough overview of these subjects.

Neonatal rats that receive sucrose during a critical postnatal period (CP, days 12 to 28) develop hypertension by the time they reach adulthood. Changes during this period could contribute to inflammation and be associated with variations in the vascular smooth muscle (VSMC) phenotype. We studied changes in inflammatory pathways that could underlie the expressions of the secretory phenotype in the VSMC in the thoracic aorta of rats that received sucrose during CP. We analyzed histological changes in the aorta and expressions of the COX-2, TLR4, iNOS, eNOS, MMP-2, -9, β-, α-actin, and TNF-α, IL-6 and IL-1β expressions, and fatty acids by gas chromatography. The aortic wall presented disorganization, decellularization, wavy elastic fibers and increase in the lumen area. The COX-2, TLR4 expressions, TNF-α and IL-6 were increased, but iNOS, MMP-2 and -9 tended to increase and eNOS and arachidonic acid tended to decrease, con increase in oleic acid in CP in comparison with control group. There is a transient hypertension at the end of the CP that is accompanied by an inflammation and a change in the phenotype of VSMC to the secretory phenotype. The inflammatory changes could act as epigenetic signals to determine the hypertension development during adulthood.

In a world filled with uncertainties, Ebb&Flow emerged as a story of convergence, intertwining dementia research, caregiving, and artistic exploration into a tripartite creative knowledge exchange. This study delves into the complexities of uncertainty in dementia care and research through a collaborative project involving artists, researchers, carers, and individuals with lived experience of dementia. Initiated by the Trellis:Arbor program, Ebb&Flow sought to co-created a human space addressing the multifaceted nature of uncertainty. The sea, with its unpredictable nature, served as a guiding metaphor for the project, reflecting the unpredictability of dementia and life. Over three months, through paintings, writings, and digital mediums, participants documented the changing emotions, challenges, and discoveries they encountered daily. The project fostered an environment where uncertainties were openly discussed, building supportive and resilient communities through participatory co-creation and methodological exchange. Key activities included a digital logbook, allowing participants to document and share their experiences of uncertainty, and the creation of the Ebb&Flow card deck—a compilation of personal stories and insights that serve as a legacy of shared experiences. Each card facilitated dialogue, understanding, and connection, bridging gaps between those affected by dementia and the broader community. The project culminated in a final exhibition and sharing event, where participants, researchers, and the public celebrated the journey's outcomes through stories and artworks. Throughout this journey, we observed that embracing uncertainty and fostering empathy through creative collaboration profoundly impacted participants, enhancing empathy and resilience. This project underscores the transformative potential of integrating artistic practices with scientific research to address the emotional and psychological burdens of dementia and research environments. Ebb&Flow demonstrates that even in the face of the unknown, a united community can find strength, solace, and understanding, highlighting the power and beauty of unity in exploring and expressing the multifaceted experiences of dementia and life.

This work addresses the relevant control system design issue for an acrylic acid plant through the lens of plant-wide stochastic optimization control (S-PWOC). The S-PWOC framework involves stochastic optimization methods. An evaluation comparison between the proposed S-PWOC model and two conventional models, specifically the two-level identification method and the typical plant-wide decentralized control structure, is performed. Despite the increasing computational demands associated with S-PWOC, experimental results highlight its effectiveness in handling different forms of uncertainty. Notably, S-PWOC demonstrates improvements in economic viability, control efficiency, and reduction of safety risks during plant operations.

For each measurement, at least three objects are needed: a solid, neutral object as a measuring instrument and two objects for comparison. This system of three spatial dimensions per object has a common time. All measurements are based on orbits relative to the firmament and coincidences of the spatial coordinates of the objects after rotations with π and provide the energy of the system. These results in the most suitable coordinate system with dimensions of powers of π in which the radius is curved, as are the longitude and latitude. Polynomials P(2π) correspond to neutral objects, in addition to P(π) for charge, spin, isospin. In addition, it is assumed that the cosmos consists of a single type of particle with a speed of light c. Normalizing to the rest mass of the electron, the neutrinos are ντ=π, νμ=1, and νe=1/π. The energy of an electron is: Ee=gfreq(π)+1−1/π. An algorithm is derived from a Christoffel symbol and similar to a lattice gauge calculation. It provides exact residual masses for neutrons, protons, muons, tauons, quarks u, d, and pions. The theory can be applied to the inner planetary system and the cosmos and explains the hierarchy problem.

In this work, we develop a detailed analysis of the current panorama for electric vehicle charging technology, focusing on the various levels and types of charging protocols and used connectors. We propose a charging station for electric cars powered by solar photovoltaic energy, performing the analysis of the solar resource in the selected location, sizing the photovoltaic power plant to cover the demand completely, and exploring different configurations such as grid connection or physical and virtual electric energy storage. Despite the current development applying for specific working conditions, operating voltage, charging rate, power demand, etc., the proposed configuration is modular, adaptable, and resilient. The simulated system operates within the 360 V to 800 V range of continuous current for charging the electric vehicles, with a selectable power range between 20 and 180 kW. The basic layout includes four charging poles, each servicing all working voltages. An oversized PV plant powers the charging station at any time of the year, saving money compared to the alternative of the electric storage unit. In addition, we build simulation tools and algorithms that optimize the design of future projects, providing a solid basis for sustainable energy infrastructure planning and design.

Polycystic ovary syndrome (PCOS) is a complex disorder that impacts both the endocrine and metabolic systems. The gut microbiota plays a crucial role in in metabolism regulation and immune responses through its interaction with the external environment. This article explores the intricate interplay between intestinal flora and the pathogenesis of PCOS, focusing on the pivotal role of microbial metabolites, specifically short-chain fatty acids (SCFAs). SCFA levels in fecal and blood samples from women with PCOS (n=69) and healthy controls (n=18) were analyzed using Gas Chromatography-Mass Spectrometry (GC/MS) for precise measurement. The results revealed that women with PCOS exhibited a significant reduction in beneficial bacteria alongside a notable overgrowth of opportunistic microorganisms. An overproduction of acetic acid (AA) and valeric acid (VA) in fecal samples suggests a link between elevated SCFAs and the development of obesity and PCOS. Interestingly, AA in the bloodstream might offer a protective effect against PCOS by ameliorating key symptoms such as high body mass index (BMI), insulin resistance (IR), and chronic inflammation. This finding points to the potential therapeutic value of maintaining optimal AA levels in the blood. Although serum SCFA levels showed non-significant changes following metformin treatment, the normalization of AA in the gut underscores that metformin exerts a more pronounced effect locally within the gastrointestinal tract. This treatment also led to an increase in beneficial gut bacteria and a reduction in opportunistic pathogens, suggesting a restoration of gut microbial balance. Furthermore, the study identified the most effective model for predicting the success of metformin therapy, based on serum concentrations of butyric acid (BA) and VA, achieving a 91% accuracy rate, 100% sensitivity, and 80% specificity. These promising findings highlight the potential for developing targeted interventions and personalized treatments, ultimately improving clinical outcomes for women with PCOS.

Observer-based control is the most commonly used method in the control of electro-hydraulic servo system (EHSS) with uncertainties, but it suffers from the drawback of low accuracy under the influence of large external load forces and disturbances. To address this problem, this paper proposes a novel compensation function observer-based backstepping sliding mode control (BSMC) approach to achieve high-accuracy tracking control. In particular, the model uncertainties, including nonlinearities, parameter perturbations and external disturbances are analyzed and treated together as a lumped disturbance. Then, a fourth-order compensation function observer (CFO) is constructed, which fully utilizes the system state information to accurately estimate the lumped disturbance. On this basis, the estimate of the lumped disturbance is incorporated into the design of an backstepping sliding mode controller, allowing the control system to compensate for the disturbance effect. The stability of the closed-loop control system under the CFO and BSMC is rigorously proven through the use of Lyapunov theory, which guarantees that all the tracking error signals converge exponentially to the origin. Comparative simulations are carried out to show the effectiveness and efficiency of the proposed approach, i.e., compared with PID and ESO-based BSMC methods, the tracking accuracy is improved by 99.93% and 99.76%, respectively.

This study investigates the strategic unity of fintech enterprises, assessing whether their characteristics bear greater resemblance to conventional banking institutions or technological corporations. Through the evaluation of operational functions, target demographics, business frameworks, stakeholder engagements, equity market dynamics, and empirical data, the analysis indicates that fintechs exhibit a closer alignment with technology companies. The inquiry uncovers significant lacunae in the prevailing scholarly discourse, particularly regarding the examination of fintechs’ fundamental attributes and their ramifications for strategic positioning. The results not only imply that fintechs are more akin to technology firms but also underscore the increasing convergence between fintechs and tech enterprises, propelled by the incursion of Big Tech and a heightened focus on sustainability. This implies an evolving financial landscape where traditional categorizations are progressively obscured. Our research is pivotal for comprehending and navigating this emergent terrain, which holds paramount importance for professionals operating within the financial and technological domains.

The rapid emergence of Decentralized Finance (DeFi), driven by blockchain technology and smart contracts, is transforming the landscape of the financial industry by enabling peer-to-peer financial services without traditional intermediaries. This paper examines the impact of DeFi on traditional banking systems, focusing on the opportunities, challenges, and future directions of this revolutionary financial model. We explore how DeFi disrupts traditional financial intermediation by offering faster, cheaper, and more transparent financial services, potentially reducing the dominance of conventional banks. The study addresses critical issues such as regulatory challenges, including compliance with Anti-Money Laundering (AML) and Know Your Customer (KYC) requirements, and the importance of consumer protection in a decentralized environment. We also investigate collaboration opportunities between traditional banks and DeFi platforms, which could lead to innovative financial products and services. To provide a comprehensive analysis, the paper employs a mixed-method approach, combining a review of recent literature, empirical data, case studies, and expert interviews. The findings highlight significant gaps in current regulatory frameworks and emphasize the need for a balanced approach that fosters innovation while ensuring financial stability and consumer safety. This study concludes by offering recommendations for policymakers, financial institutions, and DeFi developers to harness the potential of DeFi while addressing its inherent risks, paving the way for the sustainable growth of decentralized finance in the broader financial ecosystem.

Using different frequency group period phase synchronization, a precise frequency detecting technology is presented. On the basis of the phase comparison for different frequencies, a high-accuracy frequency measuring can be achieved by quantization of phase comparison results and analysis of quantization results. Using the phase coincidence points between comparison signals as the counter’s open and close signals, the time interval between the same phase coincidence points is a group period. Via the detection and analysis of the phase coincidence points, the ±1-word counting error can be eliminated, and measuring speed is also improved. By using FPGA technology, the measuring device can be simplified, and the development cost can be reduced. Testing results indicate that the frequency measuring accuracy with 10−13/s level can be achieved. The technology is greater than the common frequency measuring technology in more ways than one, such as power consumption, device volume, measuring rate, etc., so it plays an important role in Beidou satellite positioning, precise timing, high-precision time frequency transfer and comparison, scientific metrology and other fields.

Objectives: To develop and validate the Communities Geriatric Mild Cognitive Impairment Risk Calculator (CGMCI-Risk), aimed at aiding community healthcare workers in the early identification of individuals at high risk of Mild Cognitive Impairment (MCI); Methods: Based on nationally representative community survey data, backward stepwise regression was employed to screen the variables, and logistic regression was utilized to construct the CGMCI-Risk. Internal validation was conducted using bootstrap resampling, while external validation was performed using temporal validation. The area under the receiver operating characteristic curve (AUROC), calibration curve, and decision curve analysis (DCA) were employed to evaluate the CGMCI-Risk in terms of discrimination, calibration, and net benefit, respectively; Results: The CGMCI-Risk model included variables such as age, educational level, sex, exercise, garden work, TV watching or radio listening, Instrumental Activity of Daily Living (IADL), hearing, and masticatory function. The AUROC was 0.781 (95% CI = 0.766 to 0.796). Calibration curve showed strong agreement, and the DCA suggested substantial clinical utility. In external validation, the CGMCI-Risk model maintained similar performance with an AUROC of 0.782 (95% CI = 0.763 to 0.801); Conclusions: CGMCI-Risk is an effective tool for assessing cognitive function risk within the community. It uses readily predictor variables, allowing community healthcare workers to identify the risk of MCI in older adults over a three-year span.

Though Bangladesh is often labelled as "climate change ground zero," the Chittagong Hill Tracts (CHT) were never considered a significant climate change hotspot until heavy rainfall and consequent landslides in 2017. This shift in problem narrative seemingly overlooks myriad environmentally unsustainable 'development' initiatives along with (il)legal deforestation. This paper examines climate change trends and impacts on the lives and livelihoods of diverse local groups in CHT. By analysing changing patterns in meteorological data and qualitative information on changes and challenges in everyday life and the livelihoods of local people, we show a shortfall of captured climate data on CHT to make a strong case for climate change. Yet, this study finds that this region is exposed to a substantial threat of land degradation, flash floods, water scarcity, landslides, and other slow and quick onsets due to a combined effect of deforestation, neoliberalised development, and slight changes in temperature and precipitation patterns. This paper calls for proactive measures to address climate change impacts by endorsing sustainable development strategies prioritizing environmental stewardship, social justice, and economic prosperity.

Electrolyzed water, which mainly contains hypochlorous acid, is widely used because of its strong microbicidal effects, biosafety, and eco-friendliness. For frequent use in intraoral treatments, we focused on neutral electrolyzed water (NW) produced using two-stage electrolysis and investigated its storage stability. For standard-concentration NWs with free available chlorine concentration (ACC) of 25, 35, and 50 mg/L and high-concentration NWs (100, 200, 300, 500, and 1000 mg/L), changes in the pH, oxidation-reduction potential, and ACC during 126 days of storage and the bactericidal efficacies were examined. Storage under non-shaded conditions at room temperature (LRT) and a higher ACC substantially altered the properties of the NW. NW (≤ 300 mg/L) had a pH of 5.9–7.3 even after storage under LRT; however, NW with higher ACC (500 and 1000 mg/L) had a pH ˂ 5.5, critical for human enamel), even under shaded and refrigerated conditions (SLW). Only NW (25 mg/L) stored under LRT exhibited the lowest ACC (5 mg/L), indicating a decreased bactericidal effect. When stored for use in intraoral treatments, NWs should be prepared with an ACC of 25–300 mg/L and stored in SLW. If diluted NW is used, the ACC should be checked and appropriately diluted every time.

Short-circuit blowing is an important technical means to ensure the rapid surfacing of submersible. In order to study the impact of seven multiple manipulation factors of three levels on blowing, a proportional short-circuit blowing model test bench had been built and L18(37) orthogonal experiments were carried out; then, using Back propagation neural network and Pearson correlation analysis, the experimental data were trained and predicted, correlation between individual factor and blowing was further studied as supplement of orthogonal experiments. It had been proved that both multi-factor combination and individual including blowing duration, sea tank back pressure, the gas blowing pressure of the cylinder group, and sea valve flowing area had larger influence, whose correlation coefficients were 0.6535, 0.8105, 0.5569, 0.5373, of which the F-ratio of blowing duration is over critical value 3.24. And statistical evaluation indicators of Back propagation neural network were between 10e-2 and 10e-13, relative error was less than 3%, and prediction error accuracy was 100%. Based on the results above, a reasonable prediction method for submersible short-circuit blowing had been formed and suggestions on engineering design and operations were proposed, including advantage of short-circuit blowing method, initial condition settings and manipulation strategy.

A new-type vibration sensor based on a fiber Bragg grating combining with a special structure-packaged design is proposed for monitoring the mechanical vibration signals. Three different sensing structures including the film squeeze type, new film squeeze type and elastic tape squeeze type are proposed for measuring the vibration signals with the frequency range from tens to thousands of Hz. In the comparison of experimental results, the new film squeeze structure has a nice sensing performance in the range from 100 to 1000 Hz with the sensitivity of 35 mV/V. For the elastic tape squeeze structure, the elastic tape is designed to encapsulate the optical fiber with a good frequency response from 1100 to 3100 Hz. In addition, by using the new film squeeze structure to measure the steady-state and non-steady-state vibration signals, the spectral components of sensing signals are analyzed by using the wavelet transformation for confirming the testing signals. These vibration fiber sensors can be applied in the measurement of high-end manufacture-facility vibration or earthquake vibrations etc.

Proper blood-brain barrier (BBB) function is essential to maintain homeostasis keeping the central nervous system healthy. Disruption of the BBB has been described in nearly all neurological disease and injury contexts. Given the various physical and metabolic roles of the BBB and gliovascular unit (GVU), dysfunction should be assessed across multiple levels to pinpoint the exact nature of the impairment. Here we describe imaging techniques for evaluating various aspects of BBB and GVU integrity and function, tailored for use in mouse models with protocols for quantitative image analysis. These imaging techniques complement classical dye tracer experiments and reveal underlying molecular causes of BBB dysfunction.

The increasing prevalence of multidrug-resistant pathogens (MDR), persistent biofilms, oxidative stress, and cancerous cell proliferation pose significant challenges in healthcare and environmental settings, highlighting the urgent need for innovative and sustainable therapeutic solutions. The exploration of nanotechnology, particularly the use of green-synthesized nanoparticles, offers a promising avenue to address these complex biological challenges due to their multifunctional properties and biocompatibility. Utilizing a green synthesis approach, Mauritia flexuosa Mf-AgONPs were synthesized and characterized exhibiting potent antibacterial effects against both non-resistant and MDR bacterial strains, with minimum inhibitory concentrations (MICs) ranging from 11.25 to 45 µg/mL. Mf-AgONPs also demonstrated significant antifungal efficacy, particularly against Candida glabrata, with a MIC of 5.63 µg/mL. Moreover, the nanoparticles showed strong biofilm inhibition capabilities and substantial antioxidant properties, underscoring their potential to combat oxidative stress. Additionally, Mf-AgONPs exhibited pronounced anti-tumor properties against various cancer cell lines, displaying low IC50 values across various cancer cell lines while maintaining minimal hemolytic activity at therapeutic concentrations. These findings suggest that Mf-AgONPs synthesized via an eco-friendly approach offer a promising alternative for biomedical applications, including antimicrobial, antifungal, antioxidant, and anticancer therapies, warranting further in vivo studies to fully exploit their therapeutic potential.

Chemical plants are characterized by the management and operation of various hazardous materials; thus, accident risk is inherently high. Nevertheless, the incidence of chemical accidents in Korea has effectively stabilized, with no marked increase attributable to the implementation of systematic safety management procedures based on process safety management system principles. In June 2023, the Ministry of Employment and Labor in Korea unveiled the Serious Injury and Fatality (SIF) report, meticulously cataloging 4,432 instances of grave accidents spanning six years (2016–2021). The compilation comprises 1,834 and 2,574 cases within the manufacturing and affiliated sectors and the construction sector, respectively. This study provides an overview of each accident, and elucidates the causes, and recommends preventative strategies. The objective was to galvanize companies across various industrial landscapes and fortify their intrinsic safety management protocols by using accident data delineated per sector. Sixteen specific accident cases from the SIF report, all of which occurred in facilities regulated by process safety management (PSM), were investigated. Technical analysis was conducted, focusing on explosion accidents within the organic catalyst packaging process, notable for their unique patterns of occurrence. This analysis extended to an examination of the reproducibility of such accidents. Employing two system analysis methodologies, system theoretic accident model and process and barrier-based systemic cause analysis technique, this study provides insights into the causative factors of the accidents and formulates comprehensive strategies for the prevention of future accidents. The findings will contribute significantly to reducing the risk of accidents within the catalyst packaging domain and assist in the development of robust recurrence prevention measures.

Parkinson's disease (PD) is the second most common neurodegenerative disorder, entailing several motor-related symptoms that contribute to a reduced quality of life in affected subjects. Recent advances in wearable technologies and computing resources have shown great potential for the assessment of PD-related symptoms. However, the potential applications (e.g., early diagnosis, prognosis and monitoring) and key features of digital biomarkers for motor symptoms of PD (DB-MS-PD) have not been comprehensively studied. This study aims to provide a state-of-the-art review of current digital biomarker definitions for PD, focusing on the use of wearable devices. This review systematically examines research articles from 2012 to 2024, focusing on key features and recent technologies in PD research. A total of 22 studies were included and thoroughly analyzed. Results indicate that DB-MS-PD can accurately distinguish patients with PD (PwPD) from healthy controls (HC), assess disease severity or treatment response, and detect motor symptoms. Large sample sizes, proper validation, non-invasive devices, and ecological monitoring make DB-MS-PD promising for improving PD management. Challenges include sample and method heterogeneity and lack of public datasets. Future studies can leverage evidence of the current literature to provide more effective and ready-to-use digital tools for monitoring PD.

Water quality control employs techniques mostly targeting individual analytes; group detection is also practiced, but the choice of group methods is limited, which supports interest in developing such methods. We have examined an interaction of hypochlorite with a chlorine-containing heptamethine carbocyanine dye in the presence of 30 organic and inorganic model analytes that were found to induce diverse color changes in the system. The main supposed mechanisms are retardation of the dye oxidation with hypochlorite (presumably by scavenging chlorine radicals) and substitution of chlorine atom in the dye by the most nucleophilic analytes (amines, amino acids, proteins, DNA, phenol). The grass-green substitution product is more contrastingly visible against the dark-purple hypochlorite oxidation product of the dye than against the original emerald-green dye. The indicator reaction is monitored photographically for 10–40 min and the images are processed using principal component analysis (PCA) or linear discriminant analysis (LDA), allowing for data convolution for the complex color transitions. Nitrogen compounds are discriminated from the others, and more reactive analytes (tryptophan, cysteine, bovine serum albumin, and DNA) are detected in the presence of less reactive ones in natural water. The system is promising for the development of group assays for dissolved organic matter and discrimination of water samples.

This comprehensive analysis aims to offer valuable insights into the safety profiles of these glucocorticoids, facilitating the identification of compounds with potentially reduced adverse effects. This study investigates the toxicity profiles of various glucocorticoids, utilizing predictions from the pKCSM Server. Among the glucocorticoids examined, Dexamethasone, Triamcinolone, Hydrocortisone hemisuccinate, Paramethasone, Fluprednisolone, and Flumethasone emerge as potentially less toxic, displaying favorable scores across diverse parameters such as Max. Tolerated Dose (human, MRT), Oral Rat Acute Toxicity (LD50), and Oral Rat Chronic Toxicity (LOAEL). Notably, Hydrocortisone hemisuccinate and Triamcinolone stand out for their high tolerability capacity based on the Max. Tolerated Dose (human, MRT), suggesting enhanced safety profiles. These findings contribute insights into selecting glucocorticoids with optimal safety and tolerability for potential therapeutic applications.Further research and clinical investigations are warranted to validate and refine these findings, ensuring the responsible and effective use of glucocorticoids in medical practice.

Groupers (Epinephelidae) are ecologically important mesopredators that support valuable fisheries across the globe. Many groupers display slow growth and maturity, high longevity, ontogenetic habitat shifts, spawning-related migrations and aggregations, and protogynous hermaphroditism, which make them susceptible to overexploitation. In this review, I synthesize available information related to the management of grouper fisheries across the southeastern and Caribbean U.S. I highlight current management challenges, such as managing multispecies reef fish fisheries with growing recreational fishing effort. I discuss management interventions with limited success, such as establishing marine protected areas to improve the populations of groupers that display protogynous hermaphroditism. I also highlight management successes, such as recovering historically depleted grouper stocks, and ecosystem-based considerations in grouper stock assessments. I discuss how climate change and anthropogenic effects are expected to affect groupers. Lastly, I provide examples of stakeholders involved in monitoring and management efforts directed at grouper stocks. The purposes of this review are to demonstrate the complexities of managing grouper fisheries and provide a road map for future research and conservation efforts into these economically and ecologically relevant fishes within and beyond the region.

Soil contamination and the uptake of contaminants by food crops is a global problem that differs significantly from region to region, with the key factors affecting the contaminants present in local soils being the mineralogical composition of the underlying layers and local human activity. The area of ​​the Pannonian region is known for the fact that agriculture has, historically, played an important role since Roman times, which was particularly influenced by human activity. In this study we performed a preliminary study of the contamination of soil samples across the Pannonian region, to determine the potential presence of harmful contaminants. Both soil and crop samples were analysed for the potential presence of heavy metals, with additional focus placed on the potential presence of microplastics in the region`s soil.

In the field of music education, the incorporation of technology originally designed for professionals presents both significant opportunities and challenges. These technologies, although advanced and powerful, are often not adapted to meet the specific needs of the educational envi-ronment. Therefore, this study details the design and implementation process of a system con-sisting of a hardware device called "Play Box" an associated software, "Imaginary Play Box". The Design Sciences Research Methodology (DSRM) specifically adapted to software development was used to structure the project. The three phases shown in this study ranged from the conception of an initial prototype to the realisation of a working software. During the design phase, a questionnaire was developed to evaluate various aspects of the soft-ware, such as the visual interface, the programming of components and the sound interactivity provided by the Play Box. The technique of panels of experts in music pedagogy and program-ming in MAX-MSP was used to obtain critical feedback. This expert evaluation was crucial to it-erate and polish the software, culminating in a beta version optimised for the creation of electro-acoustic music for music education.

From the evening of 1st May 2023 to 3rd May 2023, severe hydro-meteorological events occurred in the Italian Emilia-Romagna region, particularly in the provinces of Forlì-Cesena, Ravenna, Bologna, Modena, and Reggio Emilia. Additionally, on 16th-17th May, another intense meteorological event occurred, impacting the Romagna provinces. Such events caused extensive flooding, landslides, isolation of many areas, evacuation of numerous families, and significant damages to infrastructure, agriculture, buildings, and essential services. Many hilly municipalities were cut off, and thousands of civilians had to be evacuated, losses of life occurred. The consequences beyond the recorded immediate impacts on infrastructure and life were impressive, and extended to the regional economy, specifically in the Fruit Valley, where, in addition to immediate yield losses, long-term damage to orchard production is expected due to persistent flooding. The civil and cultural building heritage has also been heavily affected, both in the countryside and in inhabited centers. Some of the damage, direct and indirect, caused by flooding on buildings will also see an evolution in the medium to long term that will have to be addressed. This paper analyzes the reasons that led to the atmospheric phenomenon to understand the increasing potential occurrence of similar events from the perspective of climate change. This paper document analyzes the causes and effects of these events, additionally considering the future impacts of similar hazards potentially occurring in the context of climate change. It is crucial indeed to remark how such events, when occurring in high density agricultural areas, have the potential to threat the entire regional production system for extended periods. For example, the alteration of direct physiological processes due to root drowning may compromise production of entire productive agricultural extensions and many years will be required to their replacement.

Major factors affecting in vitro immature embryo rescue efficiencies from Prunus persica or P. armeniaca accessions, have been identified along with improving its economic feasibility. Three culture media, based on Woody Plant Medium (WPM) have been used depending on the embryo size. Embryos less than 5-mm-long were cultured in WPM supplemented with 1 mM BAP and 1 mM GA3, while embryos bigger than 5-mm-long were cultured in hormone-free medium, with or without vermiculite. Environmental in vitro culture conditions consisted of three phases, a (I) stratification at 4 C during a 3 to 5-month-long period in the dark, followed by (II) growth of germinated embryos at 14 C for 4-week-long period, with 12h light a day, which favors plantlet development, and finally (III) growth at 24 C, with 16h light a day, until the plantlets were moved to the greenhouse for acclimatization. Germination of smaller embryos, at the end of the phase I, ranged from 82.2% to 22.1%, for apricot and flat peaches, respectively, whereas for bigger embryos the germination varied from 97.4% to 53.2% for the same type of fruits. Embryo germination for peaches and nectarines ranged from 40.1% to 30.3% for smaller embryos, and from 91.9% to 64.0% for bigger embryos. Endo- and exophytic contamination, affecting from 7.4% to 52.9% of cultured embryos depending on the fruit type and conservation conditions, and the capacity to acclimate to soil conditions, ranging from 50.4% to 93.2%, were the two most important factors influencing protocol’s efficiency and economic feasibility. Considering the overall efficiencies, expressed as hardened plants transferred to field plots over clean uncontaminated embryo, values ranged from 55.8% for nectarines, 54.0% for peaches, 45.6% for apricot, and 23.3% for flat fruits. Addition of vermiculite to the culture medium significantly improved plantlet development, avoiding subculture to fresh medium when an extension of the phase III was required before acclimatization. Compared to laboratory glassware, use of food glass containers with air-permeable sealing film, along with vermiculite-containing medium significantly reduced costs, when handling the large number of embryos required for breeding programs.

In conventional Federated Learning (FL), clients work together to train a model managed by a central server, intending to speed up the learning process. However, this approach imposes significant computational and communication burdens on clients, particularly with complex models. Additionally, while FL strives to protect client privacy, the server's access to local and global models raises security concerns. To address these challenges, Split Learning (SL) separates the model into parts handled by the client and the server, though it suffers from inefficiencies due to sequential client participation. To overcome these issues, SplitFed Learning (SFL) was proposed, which combines the parallelism of FL with the model-splitting strategy of SL, enabling simultaneous training by multiple clients. Our main contribution is the theoretical analysis of SFL, which, for the first time, includes non-i.i.d. datasets, non-convex loss functions, and both full and partial client participation. We provide convergence proofs for a state-of-the-art SFL algorithm based on conventional convergence analysis assumptions for FL. Our results prove that we can recover the linear convergence rate of conventional FL for the SFL algorithm with the distinction that increasing the number of local steps or clients may not speed up the convergence in SFL.

Urbanization degrades natural habitats and creates new urban ecosystems, like domestic gardens. The plant composition of these gardens varies with socio-economic factors and urban planning levels. However, the diversity and impact of introduced species are often poorly assessed, causing potential ecological imbalances, particularly in Lubumbashi (DR Congo). The objective was to analyze the spatial structure, plant diversity, propagation strategies, and ecological functions of domestic gardens. Three distinct neighborhoods were selected: planned, unplanned and residential neighborhood. 20 avenues (with 5 plots per avenue) were chosen to represent the diversity within each neighborhood, and stratified random sampling of plots was conducted to analyze gardening practices. Gardens were classified into types, and their vegetation was evaluated based on species origin and ecological impact. The analysis of domestic gardens in Lubumbashi reveals significant variations across different neighborhood types. Residential neighborhoods exhibit larger average garden sizes (315.1 m²), higher species richness (22 species), and larger plot sizes (1032 m²) compared to unplanned and planned neighborhoods, where garden areas and species richness are notably lower. Rectangular gardens dominate in unplanned areas, while planned neighborhoods feature more intentional landscaping elements, such as flowerbeds and hedges. The use of gardens for food production is prominent in planned areas (40.7%), whereas residential neighborhoods prioritize ornamentation (51.4%). The study identifies 232 species across 68 families, with a predominance of exotic species (80%) in all neighborhoods, particularly in unplanned areas (82.25%). The data reveals that Mangifera indica and Persea americana are abundant in all neighborhoods, illustrating their adaptability to different urban contexts. Herbaceous species are most common, followed by woody plants, with vines being sparse. Species dispersal is primarily driven by human activities (anthropochory), accounting for over 85% in all neighborhoods. These findings highlight the strong human influence on the composition and structure of domestic gardens in Lubumbashi, emphasizing the dominance of exotic species and the importance of anthropogenic factors in shaping urban green spaces. Urban policies should incorporate strategies to minimize the negative impacts of exotic species on native flora.

Certain species of Mucorales have been identified as causative agents of mucormycosis, a rare yet often lethal fungal infection. Notably, these fungi exhibit intrinsic resistance to common azole drugs, which target lipids. Given the pivotal role of lipids in drug resistance and their contribution to the innate resistance to azoles, this study provides a comprehensive overview of key lipid classes, including sphingolipids (SLs), glycerophospholipids(GPLs), and sterols, in Rhizopus delemar 99-880, a well-characterized reference strain among Mucorales. Through high-throughput analysis involving the identification and quantification of intermediates, we have elucidated the biosynthetic pathways of SLs, PGLs, and sterols. Notably, the acidic SLs were not found probably because the acidic branch of the SL biosynthesis pathway terminates at α-hydroxy phytoceramides as evident by their high abundance. Intermediates in the neutral SL pathway incorporated higher levels of 16:0 fatty acid compared to other pathogenic fungi. A strikingly high phosphatidylethanolamine (PE)/phosphatidylcholine (PC) ratio was observed among GPLs. Ergosterol remains the major sterol, similar to other fungi, and our analysis confirms the existence of alternate ergosterol biosynthesis pathways. The total lipidomic profile of R. delemar 99-880 offers insights into its lipid metabolism and potential implications for studying pathogenesis and drug resistance mechanisms.

Minimizing optical losses in resonant cavities is crucial for improving photonic device performance. This study focuses on the development of a simulation tool to analyze scattering losses in Fabry-Pérot interferometers (FPI), offering precise modeling of waveguide dynamics and contributing to accurate loss predictions across various platforms. Optical cavities often suffer from scattering losses due to surface roughness and material defects. Our approach integrates theoretical models and simulations to quantify these losses, utilizing the FPI as a model system. We identified upper and lower reflectivity thresholds, beyond which accurate measurement of losses becomes unreliable. For reflectivity below a certain threshold, measurement errors arise, while excessively high reflectivity can reduce fringe visibility and introduce detector sensitivity issues. Simulations were used to validate the model's ability to predict reflectivity and attenuation in waveguides with varying loss levels. The software’s flexibility to adjust transmission parameters for different cavity configurations enhances its utility for a broad range of photonic systems. Our study offers a novel methodology for optical loss analysis, with practical applications in optimizing photonic devices. By providing a reliable tool for precise loss measurement, this work supports advancements in optical technologies, enabling the design of more efficient, high-performance devices across various applications.

Automating pruning tasks entails overcoming several challenges, encompassing not only robotic manipulation but also environment perception and detection. To achieve efficient pruning, robotic systems must accurately identify the correct cutting points. A possible method to define these points is to choose the cutting location based on the number of nodes present on the targeted cane. For this purpose, in grapevine pruning, it is required to correctly identify the nodes present on the primary canes of the grapevines. In this paper, a novel method of node detection in grapevines is proposed with four distinct state-of-the-art versions of the YOLO detection model: YOLOv7, YOLOv8, YOLOv9 and YOLOv10. These models were trained on a public dataset with images containing artificial backgrounds and afterwards validated on different cultivars of grapevines from two distinct Portuguese viticulture regions with cluttered backgrounds. This allowed to evaluate the robustness of the algorithms on the detection of nodes in diverse environments, compare the performance of the YOLO models used, as well as create a publicly available dataset of grapevines obtained in Portuguese vineyards for node detection. Overall, all used models were capable of achieving correct node detection on images of grapevines from the three distinct datasets. Considering the trade-off between accuracy and inference speed, the YOLOv7 model demonstrated to be the most robust in detecting nodes in 2D images of grapevines, achieving F1-Score values between 70 % and 86.5 % with inference times of around 89 ms for an input size of 1280×1280 px. Considering these results, this work contributes with an efficient approach for real-time node detection for further implementation on an autonomous robotic pruning system.

Multifunctional coatings based on Sn-Ni materials with and without titanium oxide nanoparticles (TiO2NPs) incorporation were prepared using the electrochemical deposition technique at 70°C. TiO2NPs were dispersed in the electrolyte bath, and their influence on both surface texture, crystalline phase, and properties was investigated. Various techniques such as X-ray phase analysis (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray microanalysis (EDX) were used to characterize the prepared coatings. The anti-corrosion effectiveness of the coatings was assessed using potentiodynamic polarization curves and electrochemical impedance spectroscopy in an artificial sweat medium, while the bactericidal activity of the composite coatings (the ability to induce cell death) was evaluated in accordance with ISO 27447:2009 test. The influence of the TiO2NPs on the composition, structure and properties of the deposited coatings was established. Particular attention was paid to the relationship between the anticorrosive and bactericidal properties of the coatings and their structure and composition. The synergistic effect of the various properties was investigated and discussed.

Recent progress in studies of Rydberg double-well electronic energy states of MeNg (Me=12-group atom, Ng=noble gas atom) van der Waals (vdW) molecules is presented and analysed. The presentation covers approaches in experimental studies as well as ab-initio-calculations of potential energy curves (PEC). The analysis is shown in a broader context of Rydberg states of hetero- and homo-diatomic molecules with PECs possessing complex ‘exotic’ structure. Laser induced fluorescence (LIF) excitation spectra and dispersed emission spectra employed in spectroscopical characterization of Rydberg states are presented on the background of diversity of spectroscopic methods of their investigations such as laser vaporization-optical resonance (LV-OR), pump-and-probe methods and polarization labelling spectroscopy. Importance and current state-of-the-art applications of Rydberg states with irregular potentials in photoassociation (PA), vibrational and rotational cooling, molecular clocks, frequency standards and molecular wave-packet interferometry is highlighted.

Artificial intelligence has garnered significant attention in recent years as a rapidly advancing field of computer technology. With the continual advancement of computer hardware, deep learning has made breakthrough developments within the realm of artificial intelligence. Over the past few years, applying deep learning architecture in medicine and Industrial anomaly inspection has significantly contributed to solving numerous challenges related to efficiency and accuracy. Despite excellent results in radiological, pathological, endoscopic, ultrasonic, and biochemical examinations, this paper utilizes deep learning combined with image processing to identify spinal canal and vertebral foramen dimensions. In existing research, technologies such as corrosion and expansion in magnetic resonance image (MRI) processing have also strengthening the accuracy of results. Indicators such as area and Intersection over Union (IoU)are also provided for assessment. Among them, the mean average precision (mAP), for identifying intervertebral foramen (IVF) and intervertebral disc (IVD) through YOLOv4 is 95.6%. Resnet50 mixing U-Net was employed to identify the spinal canal and intervertebral foramen and achieved IoU scores of 79.11% and 80.89%.

Purpose: Our aim in this case is to report a new finding regarding Nutcracker syndrome (NCS), which is a variation of the left renal vein. Methods: We present a very rare anatomical variant of the left renal vein(LRV), with a preliminary diagnosis made by ultrasound and NCS as a differential diagnosis with computed tomography (CT) and diagnostic CT angiography. Results: The patient in our case was a 30-year-old woman with chronic abdominal and flank pain and increased sensitivity in the flank area. Neither hematuria nor proteinuria was detected in the urinalysis. Contrast-enhanced computed tomography(CT) showed that there were two separate LRVs draining the lower and upper poles. It was observed that the vein draining the lower pole narrowed significantly between superior mesenteric artery and abdominal aorta and then continued to widen. This view showed that we were faced with a typical NCS. What made our case different and unique from typical NCS was that it had renal intraparenchymal varicose veins. Treatment of NCS includes open, laparoscopic and robotic surgical repair and endovascular/extravascular stent placement. Treatment of symptomatic NCS includes open, laparoscopic, and robotic surgical repair and endovascular/extravascular stent placement. Except for the presence of hematuria causing severe anemia, deterioration in kidney functions and serious pain, patients are followed conservatively, and our patient is also followed conservatively. Conclusion: This case we present is the first case accompanied by renal parenchymal varices in the literature.

The esterification of propylene glycol methanol (PM) and acetic acid (AA) is an important reaction for the production of propylene glycol methyl ether acetate (PMA). Herein, we used macroporous ion exchange resin Amberlyst-35 as a catalyst to explore the effects of reaction conditions on the reaction rate and equilibrium yield of PMA. Under the optimized conditions of reaction temperature of 353 K, initial reactant PM/AA molar ratio of 1:3, and catalyst loading of 10 wt%, PMA equilibrium yield reached 78%, which is the highest equilibrium yield so far. The reaction equilibrium constants and activity coefficients were estimated to obtain reaction thermodynamic properties, indicating the exothermicity of the reaction. Furthermore, Pseudo-homogeneous (PH), Eley-Rideal (ER), and Langmuir-Hinshelwood-Hogen-Watson (LHHW) kinetic models were fitted based on experimental reaction kinetic data. The results demonstrate that the LHHW model is the most consistent with experimental data, indicating surface reaction controlled process and exhibiting an apparent activation energy of 62.0 kJ/mol. This work represents a valuable example of calculating the reaction thermodynamic and kinetics, which are particularly essential for promising industrial reactor design.

Life Cycle Assessment (LCA) is a widely used tool to measure the environmental sustainability of products or processes. Integrating LCA into the assessment of waste diversion strategies recognizes current waste diversion strategies are insufficient to effectively stem the global impacts of waste particularly with increased pressure to recover organic and inorganic materials to reduce landfill impacts and promote the circular economy. Historically, waste diversion efforts in municipalities and industries focused on higher-profile inorganic wastes, such as plastics and other recyclables. However, organic waste is increasingly identified as a key waste fraction that must be effectively managed and regulated. This research surveys published LCA studies from 2019 to 2023 focusing on the anaerobic digestion (AD) of organic waste. Notable conclusions include the lack of studies comparing AD with the latest treatment options such as co-gasification; the insufficient attention to the LCAs on biogas upgrading methods; and the monetization of LCA results using carbon credits. In addition, more than 50% of reviewed LCA studies concluded the results with a sensitivity analysis which was not a common practice before 2019 in LCA studies in anaerobic digestion. This signifies the increasing need to understand uncertainty in the circumstances governing applying AD to wastes. Finally, neglecting the combined effect of several parameters in sensitivity analysis might have reduced the accuracy of the sensitivity analyses in the reviewed LCAs. Overall, LCAs conducted on AD-related applications vary widely in terms of scope and consistency, implying that the outcomes may not be as applicable as intended. The identified challenges, issues, and other findings related to this research are expected to help standardize LCA procedures as applied to AD to promote greater comparability.

Early weaning management followed by energy supplementation can lead to metabolic alterations in the calf that exert long-term effects on the animal’s health and performance. It is believed that the main molecular basis underlying these metabolic adaptations are epigenetic mechanisms that regulate, activate, or silence genes at different stages of development and/or in response to different environmental stimuli. However, little is known about postnatal metabolic programming in Bos indicus. Therefore, this study aimed to compare the DNA methylation profile of Nellore animals submitted to conventional and early weaning and to correlate the findings with genes differentially expressed in Longissimus thoracis skeletal muscle of Bos indicus cattle. A total of 481 differentially methylated regions were identified, with 52% (250) being hypermethylated and 48% (231) hypomethylated. Functional enrichment analysis of 53 differentially methylated and differentially expressed genes was performed. The main enriched terms and pathways were associated with 3’-5’-cyclic adenosine monophosphate (cAMP) signaling which present the upregulated adenylate cyclase 3 (ADCY3) gene and significatively hypomethylated in promoter region. Alterations in cAMP signaling are involved in numerous processes, many of them related to lipid metabolism. The relative differential expression of key genes of this pathway demonstrates the relationship between cAMP signaling and de novo lipogenesis. These findings suggest an important role of postnatal metabolic programming through DNA methylation mechanisms in determining fat deposition in beef.

Aim: This study aims to analyze the evolution of co-author networks in Single-Balloon Enteroscope (SBE) research from 2000 to 2023, using data from the Web of Science (WoS) Core Collection. The objective is to provide a structural overview of researcher collaborations in this specialized field, highlighting key contributors and the impact of international cooperation. Method: I conducted a co-author network analysis on 149 SBE-related articles indexed in the WoS Core Collection between 2000 and 2023. Using Python (Version 3.10.5) within the PyCharm development environment (Software Version 2022.1.3), I assessed macro-level indicators including network density, clustering coefficient, number of components, and average distance. Micro-level indicators such as degree centrality, closeness centrality, and betweenness centrality were also evaluated to understand the roles of individual researchers in the network.Result: The analysis revealed that the co-author networks in SBE research have evolved over the studied period, with varying degrees of connectivity and collaboration. From 2000 to 2009, the network showed moderate clustering but high fragmentation, with a few key researchers like Nista, Enrico C., and Spada, Cristiano playing central roles. In the 2010-2019 period, network density decreased, indicating expansion in the author pool but less frequent co-authorships. However, the clustering coefficient remained high, suggesting localized collaboration. Central figures such as Itoi, Takao emerged as influential in bridging network gaps. In the most recent period (2020-2023), network density moderately increased, reflecting improved collaboration. Key contributors included Tanisaka, Yuki, and Ryozawa, Shomei, who enhanced connectivity within the network. Despite these advancements, the network remained fragmented with isolated components throughout all periods. Conclusion: The co-author networks in SBE research have shown an overall increase in collaboration over the past two decades, with key contributors playing pivotal roles in connecting disparate groups. However, the persistent fragmentation suggests a need for more integrated efforts to enhance international collaboration. Understanding these network dynamics can inform future strategies for fostering global cooperation and advancing SBE research.

The main objective is to evaluate HbA1c levels in patients with cystic fibrosis-related diabetes (CFRD) after one-year of therapy with elexacaftor/tezacaftor/ivacaftor (ETI). The secondary objective is to study the changes in total daily insulin dose (TDD), pulmonary function and metabolism in this population. A retrospective sin gle-center observational study was conducted at Regional Cystic Fibrosis Centre and Diabetology Centre of IRCCS Istituto Giannina Gaslini. The observation period was divided into Time 0 (ETI treatment initiation), Time 1 (T1 – 3 months of ETI therapy), Time 2 (T2 - 6 months of therapy) and Time 3 (T3 - 12 months of therapy). Demographic and clinical data were collected. The results were then stratified by genotype (F508del in homozygosity or heterozygosity). Twenty-eight patients with CFRD undergoing insulin therapy were included. TDD (IU) significantly decreased at T1 and T2, but not at T3, as for HbA1c. The number of hospitalizations and pulmonary exacerbations decreased significantly. We demonstrated both improvement in glycemic control (by means of HbA1c) and insulin requirement in insulin dependent CFRD patients after one year of only ETI treatment.

Mobility hubs (MHs), where various transport modes converge, are increasingly being implemented as a key policy strategy to promote sustainable travel behavior. The existing literature is rich with proposals for various types of MHs and their suitable siting locations. However, studies comparing the role of land use patterns on the performance of different types of MHs are scarce. This study aims to fill this gap by analyzing transit patronage and active mode share as performance indicators of MHs. It compares the effects of land use patterns on the performance of different types of MHs classified by the nature of transport integration (e.g., train-tram-bus, train-tram, and train-bus) in different contexts (e.g., city center and suburb) in the Greater Melbourne Area, Australia. Results show that MHs, irrespective of their type, significantly enhance the use of both transit and active transport services compared to a unimodal train station, with maximum usage observed in a train-tram-bus hub, followed by train-tram and train-bus hubs. However, the underlying land use patterns significantly affect their performance. While the size of commercial land use consistently and positively influences transit patronage across MH types, certain land use patterns (e.g., intersection density, cultural centers, care facilities) exert their influence in specific types of MHs. These findings suggest that MH typologies should be designed in tandem with supportive land uses to maximize sustainable travel behavior.

Dhaka one of the fastest-growing megacities in the world is increasingly vulnerable to urban flooding due to rapid urbanization, inadequate drainage infrastructure, and climate change-induced extreme weather events. This study presents the development of an urban flood forecasting system for Dhaka City using the MIKE+ hydrodynamic modeling software. The system integrates detailed hydrological and hydraulic models to simulate urban flooding scenarios, accounting for complex drainage networks and catchment characteristics. Real-time data from river gauges, rainfall stations, and drainage systems are incorporated to enhance the accuracy and reliability of the forecasts. The model's predictive capability is validated against historical flood events, demonstrating its effectiveness in forecasting flood extents, depths, and durations in critical areas of the city. This system serves as a valuable tool for city planners, emergency response teams, and decision-makers, enabling proactive flood management and risk mitigation. The study underscores the importance of such advanced modeling tools in safeguarding urban populations and infrastructures from the increasing threat of urban floods in Dhaka and similar rapidly urbanizing cities.

The abundant and renewable resources from fruit byproducts are getting emphasis on their valorization. These byproducts are suspected of possible toxications during cultivation, harvesting, transporting, preservation, or processing. Hence, presenting scientific overviews of the toxicological qualities and detoxification trends of these byproducts is critical to implicating their possible valorization. This review emphasized the toxicological qualities of byproducts from fruits for which the maximum global production occurred in 2022. In this review, heavy metals (As, Cd, Co, Cr, Ni, Pb, and Hg), mycotoxins, toxicant organic compounds, anti-nutritional factors, and pesticide/fungicide residues of the selected fruit byproducts were discussed. Current trends to reduce possible toxicants of these byproducts during their valorization were emphasized. Novel functional foods valorized from these fruit byproducts and future perspectives of detoxification were also focused on in this review.

The article is focused mainly on verifying the suitability of data from experimental milling heat-treated beech wood and on investigation of the effect of technical and technological parameters of milling on the energy consumption of this process. The independent parameters of machining process are cutting speed, feed speed, rake angle, and hydrothermal modification of experimental wood material. Based on analysis of variance it can be argued that the greatest statistically significant effect on energy consumption have cutting speed and rake angle of the tool while the feed speed had the least influence. The measured data of cutting power during milling were used to build a regression model and validate it, while the most suitable type of model with correlation of 87 % is Classification and Regression Tree followed by model created by Random Forests method.

Background: Atrial fibrillation (AF) is increasingly recognized in pediatric patients, presenting unique challenges in management due to its association with various underlying heart conditions. This study aimed to evaluate the prevalence, management strategies, and outcomes of AF in this population. Methods: A retrospective analysis was conducted at a tertiary pediatric cardiology center, including patients aged ≤18 years diagnosed with AF between January 2015 and December 2023. The study focused on demographic details, clinical presentations, treatments, and outcomes. Descriptive statistics were employed to assess treatment efficacy, recurrence rates, and complications. Results: The study included 36 pediatric patients (median age: 15 years, IQR: 13-17; 58% male). Of these, 52.8% had acquired heart disease, 16.7% had congenital heart anomalies, and 16.7% presented with lone AF. The initial management strategies involved electrical cardioversion in 53.3% of patients and pharmacological conversion with amiodarone in 46.7%. Rhythm control therapy was administered to over 80% of the cohort, and 63.9% were placed on oral anticoagulation, predominantly for rheumatic and congenital heart diseases. The overall success rate of rhythm control was 96.2%, with an AF recurrence rate of 3.8%. Ischemic stroke was the most common complication, occurring in three patients, all with underlying rheumatic heart disease. Conclusion: AF in pediatric patients is predominantly associated with rheumatic and congenital heart diseases, though a significant proportion of patients present with lone AF. Despite effective rhythm control in most cases, neurological complications, particularly ischemic strokes in patients with underlying heart disease, remain a critical concern. These findings underscore the need for more comprehensive studies to better understand the etiology, risk factors, and optimal management strategies for pediatric AF.

The Riemann zeta function plays a crucial role in number theory and its applications. The Riemann Hypothesis (RH) posits that zeros of other than the trivial ones are located on the line defined by the equation Re(s) =1/2. This paper introduces a novel and straightforward proof of the Riemann Hypothesis. The proof employs a standard method, utilizing the eta function in place of the zeta function, under the assumption that the real part is greater than zero. The equation for the real and imaginary parts of the Riemann zeta function (eta function) is completely separated. Initially, let with s= . The value of the real part is determined by solving the equation, and the process is repeated for identifying the potential roots shared by the two functions, a common value is obtained, leading to a =1/2, which represents the real part of the main root of the function ζ(s). By plotting the zeta function for the obtained a, it is determined that the function has a root only at a =1/2. In another analysis, by identifying the roots of the common potential between the two functions ζ(s) and ζ(1-s), a common value is obtained, which leads to a =1/2. This value represents the real part of the main root of the function ζ(s). Additionally, using a standard method and with the help of two functions ζ(s) and ζ(1-s), the real part of the root of the zeta function is obtained. To create a generator function for prime numbers in terms of b, one can solve the root of the zeta function where it equals one (i.e., and obtain a relationship between b’ and prime numbers. Giving the value of zeta equal to one and s' = a' + ib’, similar to zeta equal to zero, the roots are again placed on the line. Then, by using the zeta function defined by multiplying prime numbers, we arrive at a new meaningful relation between b’ and its corresponding prime number is obtained.

Despite extensive research on autism in children, much less attention has been given to the transition into adulthood. This study aims to address this gap by examining the dietary behaviors of young adults with autism during this critical transition period, highlighting the role of diet in enhancing their readiness for adulthood. Forty-seven participants (mean age 21.0 ± 1.1 years), both male and female, were involved in this study. Participants had various comorbidities, such as mood disorders, attention-deficit/hyperactivity disorder, depression, and anxiety disorders, for which they required medication. Dietary behavior was assessed using the Starting the Conversation: Diet survey, while transition readiness was measured with the Transition Readiness Sur-vey. T-test and regression analysis were utilized to evaluate the data. The results indicated that participants did not follow healthy eating habits, as reflected by the dietary scores (1.08 ± 0.07), and were not adequately prepared for adulthood, as shown by the transition readiness scores (3.19 ± 1.10). A statistically significant and negative correlation was found between dietary pat-terns and transition readiness (r = -0.51, p < 0.001), indicating an adverse relationship: transition readiness ratings decline as diet scores rise. Linear regression analysis revealed that dietary habits accounted for 26.20% of the variation in transition readiness, with the confidence interval for the coefficient of dietary habits being -2.89 to -0.95 (p = 0.002). The negative significant correlation between dietary scores and transition readiness scores shows that diet behavior significantly influences participants’ assessed readiness for transition.

Sarcopenia, characterized by the progressive loss of muscle mass and strength, poses significant risks to physical health, leading to a reduced quality of life (QoL), increased disability, and higher mortality rates among older adults. Early detection and intervention are crucial to prevent the cascading effects of sarcopenia, including falls, fractures, and hospitalization. This study determined an optimal cut-off point of the SarQoL® score that can serve as an effective screening tool among community-dwelling Korean older adults. The study involved 451 South Korean older adults, assessing the correlation between SarQoL® scores and sarcopenia as defined by the Asian Working Group for Sarcopenia (AWGS) criteria. Participants completed the Korean version of the SarQoL questionnaire. Findings revealed that individuals diagnosed with sarcopenia had significantly lower SarQoL® scores compared to non-sarcopenic participants, with a cut-off score of ≤ 58.5 providing good diagnostic accuracy (AUC = 0.768, sensitivity = 69.3%, specificity = 75.2%). These results underscore the questionnaire’s reliability and validity in screening for sarcopenia-related QoL impairment and its potential utility as a clinical tool. Implementing the SarQoL® in routine assessments could improve clinical outcomes by enabling earlier and more precise identification of sarcopenia.

BACKGROUND: Qu-aroma is a critical quality indicator for medium-high temperature Daqu (MT-Daqu), significantly influencing the aroma profile of strong-aroma Baijiu (SAB). SAB is produced across various regions in China, each with unique environmental conditions and production techniques. These regional differences are likely to cause variations in the Qu-aroma of MT-Daqu. Despite this, comprehensive research on the variations in Qu-aroma across different regions has been lacking. This study aims to address this gap by utilizing Gas Chromatography-Olfactometry-Mass Spectrometry (GC-O-MS) and electronic nose (E-nose) technology, combined with sensory evaluation, to analyze the differences in Qu-aroma characteristics and volatile compound profiles of MT-Daqu from seven distinct production areas.RESULTS: Sensory analysis identified seven broad aroma categories and 25 specific aromas characterizing the Qu-aroma of MT-Daqu samples. Chen aroma and roasted aroma were notably more prevalent in MT-Daqu samples from Sichuan compared to those from other regions (P < 0.05), while the fermentation aroma was less prominent in Sichuan samples. In total, 123 volatile compounds were detected in MT-Daqu, with 46 classified as aroma-active compounds. Among these, 21 aroma-active compounds were identified as markers distinguishing Sichuan MT-Daqu from those produced in non-Sichuan regions, showing significant differences in their concentrations (P < 0.05). Additionally, six major aroma-active compounds-ethyl isovalerate, ethyl heptanoate, hexanal, 1-nonanal, (E)-2,4-decadienal, and 2,3-dimethyl-5-ethylpyrazine-were found to significantly contribute to the aroma differences between Sichuan and non-Sichuan MT-Daqu.CONCLUSION: This study delineates the distinct Qu-aroma characteristics of MT-Daqu from various SAB production areas and identifies the aroma-active compounds responsible for these differences. The insights gained from this research offer valuable guidance for optimizing flavor profiles in MT-Daqu production, potentially enhancing the overall quality and regional distinctiveness of the product.

This study aimed to investigate knowledge, attitudes, and practices related to pre-prepared foods among college students in Central China. In May 2024, we completed a cross-sectional study using an online questionnaire. A total of 1,676 questionnaires were distributed online, and 1,566 valid questionnaires were collected. The survey results showed that the average score for knowledge, attitudes, and practices of pre-prepared foods was 11.98 (0.00-32.00), and the average scores for knowledge, attitudes, and practices were 5.42 (0.00-8.00), 2.94 (0.00-11.00) and 3.62 (0.00-20.00), respectively. Ethnicity, place of residence, the number of children in the family, academic qualifications, monthly family income, monthly living expenses, satisfaction with school catering services, and body mass index were associated with college students' knowledge, attitudes, and practices of pre-prepared foods. College students have a high level of knowledge of pre-prepared foods. However, they have a more negative attitude towards pre-prepared foods, and their overall level of knowledge, attitudes, and practices of pre-prepared foods are relatively low. Therefore, it is necessary to strengthen the education of college students on the knowledge related to pre-prepared food to enhance their cognitive level and to improve students' attitudes towards pre-prepared foods by adjusting the campus food service to be more positive. Healthy eating behaviors should also be encouraged.

Spin Assisted Layer-by-Layer (SA-LbL) assembly is one of the Layer-by-Layer (LbL) assembly variants. It is considered as the fastest LbL assembly, however, the deficiency of layering quality on bigger polymeric support size poses a significant challenge to the application of SA-LbL assembly at a larger or industrial scale. To address the challenge, combined spin-spray assisted Layer-by-Layer (SSA-LbL) is employed to prepare membrane. In this study, nanofiltration (NF) thin film composite membranes were prepared by alternate deposition of branched-polyethyleneimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) on polyethersulfone (PES) ultrafiltration (UF) membrane support. The resulting membrane was then tested to separate NaCl from water. One of the membranes produced in this work, i.e., (PEI/PSS)10 achieved rejection rate of 76.2 %; permeability of 2.79 l/h·m2·bar tested at pressure of 10 bar, temperature of 24.58 ± 0.51 °C , and NaCl-Feed concentration of 2076.75 ± 40.51 ppm. The membrane fouling resistance was also examined in 5 days-test. The membrane showed stable performance and lost only about 30% flux from the initial flux due to fouling which was comparable to that of commercial NF membrane such as NF90. Hence, this work shows that SSA-LbL can be considered as a promising and innovative membrane fabrication technique as it offers flexibility and applicability for preparing membrane from various materials as well as pertinence to industrial scale.

This study explores the application of AncorLam HR (Höganäs, Sweden), a soft magnetic composite (SMC) material, in the stator core of an axial flux permanent magnet (AFPM) drive motor. Building on previous research that provided mechanical and thermal properties of AncorLam HR, the study focuses on analyzing how the manufacturing process affects the motor core's shape. A bulk prototype was created based on Case 3, which demonstrated the least deviation in density and internal stress. The prototypes were produced under the specified conditions of SPM 7 and 90°C, resulting in an average density and simulation density error of 0.54%, which confirms the effectiveness of the process. To further verify the reliability, the microstructure of the AncorLam HR powder and the resulting bulk prototype was analyzed. Scanning electron microscopy (SEM) measurements at 5mm, 20mm, and 25mm on Sample 2, which had the highest density, confirmed the consistency between simulation and prototype density trends. Additionally, electron backscatter diffraction (EBSD) analysis revealed a random orientation of the powder, while X-ray diffraction (XRD) showed consistent iron (Fe) peaks at 44.9°, 65.0°, and 82.3° in both the powder and bulk prototypes, indicating no significant change in the internal phase structure. Further analysis using energy-dispersive spectroscopy (EDS) and transmission electron microscopy (TEM) identified that the phosphorus (P) content was eliminated during the molding process, which led to the destruction of the insulating layer, a critical performance factor for SMC materials. In AFPM motor simulations, the average torque was measured at 34.5 mN·m, with core loss increasing as frequency increased. The observation of iron loss spikes during motor startup indicates the need for further research to optimize material selection. This study confirms the viability of using AncorLam HR in electric vehicle motor cores and provides essential data for improving the performance of AFPM motors. Future research should prioritize optimizing SMC materials to enhance the performance and efficiency of AFPM motor applications.

Biodiesel, a potent replacement for petroleum diesel, is derived from fatty acids in biomass through transesterification, which is renewable, non-toxic, and biodegradable and is a powerful replacement for petroleum diesel. Lewis acid has been proven effective for esterification and transesterification. The Lewis base enhances the electrophilic and nucleophilic properties of the molecules that bind to it, leading to the remarkable versatility in the Lewis base catalytic reaction. Many studies have shown that Lewis acid/base catalyzed in-situ transesterification is a fast and environmentally friendly method for producing biodiesel. The utilization of Lewis acid-base sites to catalyze transesterification has been shown to enhance their efficiency and utilization of ac-id-base active sites. This review explores biodiesel production by different catalysts using Lewis acid-base sites, the conditions for catalytic transesterification, the effects of different reaction parameters on biodiesel production, and biodiesel production process.

Biological pre-treatment holds much promise as an innovative and sustainable strategy to improve biogas production from crop residues. In the present study, a novel hot spring cellulolytic microbial consortium (HSCMC) was used to pre-treat crop residues, such as maize stover, wheat straw and soybean straw to improve biogas production by anaerobic digestion (AD). Results indicated that the ash and volatile solids in maize stover were significantly reduced by maximum values of 21.3 % and 69.2 % respectively, after 7 days of pre-treatment over non-treated residues. The maximum decline of 83.9 % in total solid content was reported in wheat straw. The total reducing sugar content was increased by maximum yields of 60.9 %, 96.3 % and 84.7 % in maize stover, wheat straw and soybean straw, respectively. Furthermore, the HSCMC consortium enhanced the cumulative methane yield of wheat straw, maize stover and soybean straw by 50.6 %, 50.2 % and 56.6 %, respectively. Increased methane yield from pre-treated crop residues implies that this method could be an economically viable option for large-scale valorization of the AD process.

The COVID-19 pandemic has significantly altered how people work, with an increasing number transitioning to working-from-home (WFH). This paradigm shift has raised various challenges in adapting living spaces to meet the needs of remote work. Dedicated workspaces or home offices need to be customised for creativity and productivity. Thus, this systematic literature review explores the potential challenges and limitations of implementing modern office design features in residential environments. The study synthesises findings from 108 peer-reviewed articles published within the last decade, focusing on ergonomics, productivity, work-life balance, and spatial constraints. The study found several challenges in translating office design features to home settings. Firstly, spatial limitations in residential areas often restrict the implementation of open-plan layouts and collaborative zones, which are hallmarks of modern office designs. Secondly, the integration of ergonomic furniture and adjustable workstations are limited by budget constraints and the dual-purpose nature of many home spaces. Furthermore, the review highlights the psychological challenges of maintaining work-life boundaries when professional and personal spaces overlap. Noise pollution and distractions emerge as significant factors impacting productivity in home offices, which contrasts controlled modern office environments. The review suggests that the complete replication of modern office design in homes may be impractical, a hybrid approach that adapts key features to residential constraints could enhance home office productivity. Potential solutions could include modular furniture designs, the simulation of collaborative spaces, and the development of noise-cancelling technologies specifically for home environments. This study contributes to the growing body of knowledge on remote work environments and provides valuable insights for enhancing work-life balance, environmental sustainability, and economic growth.

The article focusses on detecting the unbalance of a mechanical component in the electric drive system of a two-mass servomechanism with a PMSM motor, which is connected to the load via a long, flexible shaft. In the example analysed, the degree of unbalance was determined using the reference current signal from the speed controller of the FOC control system. The authors pre-sented a two-mass model with an unbalanced mechanical system. The STFT transform was used to analyse the symptoms of unbalance and an artificial neural network MLP was used for system state inference. The effectiveness of the presented analysis, based on the reference current signal from the sensor embedded in the control system, was experimentally confirmed.

The increasing importance of hydropower generation has led to the development of new smart technologies and the need for reliable and efficient equipment in this field. As long as hydropower power plants are more complex to build up than other power plants, the operation regimes and maintenance activities become essential for the hydropower companies to optimize their performance, such that including the data-driven approaches in the decision-making process represents a challenge. In the paper, a comprehensive and multi-task framework integrated into a Knowledge Discovery module based on Data Mining to support the decisions of the operators from the control rooms and facilitate the transition from the classical to smart Supervisory Control and Data Acquisition (SCADA) system in hydropower plants has been designed, developed, and tested. It integrates tasks related to detecting the outliers through advanced statistical procedures, identifying the operating regimes through the patterns associated with typical operating profiles, and developing strategies for loading the generation units that consider the number of operating hours and minimize the water amount used to satisfy the power required by the system. The proposed framework has been tested using the SCADA system's database of a hydropower plant belonging to the Romanian HydroPower Company. The framework can offer the operators from the control room comparative information for a time horizon longer than one year. The tests demonstrated the utility of a Knowledge Discovery module to ensure the transition toward smart SCADA systems that will help the decision-makers improve the management of the hydropower plants.

In a 2014 paper by C. Fulton, D. Pearson, and S. Pruess, a new characterization of the spectral density function is given for a Sturm-Liouville equation. These authors provide spectral theory showing that the Appell system, a companion linear system of ordinary differential equations, can be utilized to obtain a spectral density function. Though this new method is both elegant for its simplicity and fully viable (as is shown in this work), it has largely been ignored in the literature since its discovery with no citations yet logged in the MathSciNet database. To motivate greater attention towards this 2014 paper, the new spectral theory within it, and its potential applications, work is given here by this author demonstrating a nontrivial example of this new spectral method being applied towards the Bessel Equation in its Liouville-Normal (L-N) form. Validations of results obtained in this paper are also given, showing full agreement with the classical results obtained by E.C. Titchmarsh.

Obesity and chronic inflammation are well-known risk factors for cancer. Interleukin-33 (IL-33) functions in inflammatory diseases, particularly those related to obesity and cancer. However, the correlation and molecular mechanisms linking IL-33, obesity, and cancer remain unclear. IL-33 is a nuclear cytokine released as an alarm signal when cells are damaged or stressed. It is expressed in epithelial, endothelial, and fibroblast-like cells during normal conditions and in-flammation. When IL-33 is present, immune cells expressing the IL-1RL1/ST2 receptor are alerted in response to tissue damage or cell injury. Research on IL-33 and its correlation with obesity has revealed improvements in inflammatory and metabolic changes associated with obesity. IL-33 can have both pro-tumorigenic and antitumorigenic effects, depending on the cellular content, in-flammatory environment, expression levels, and bioactivity of IL-33. This review will discuss the various functions of IL-33 in obesity-driven inflammation and cancers and how they intersect.

This investigation pioneers an examination of the scarcely explored terrain of social diversity in medical education, assessing the complex impacts of socioeconomic status (SES), prior working experiences, and completed apprenticeships on a spectrum of psychological and academic facets among first-year medical students (n = 336) in an urban university setting. By utilizing a systematic and detailed approach, the study illuminates prior anatomical knowledge and various psycholog-ical constructs, marking a significant stride into a domain where knowledge remains profoundly limited. Analyses indicated that SES significantly affects financial anxiety (F(4, 331) = 17.391, p < .001) and academic behavioral confidence (F(4, 331) = 4.323, p = 0.002). Students with prior working experience reported higher self-perceived clinical experience but lower A-level grades (t(279.459) = -6.690, p < .001), competence in natural sciences (t(321.045) = -3.178, p = 0.002), and online competence (t(319.429) = -2.026, p = 0.044). Those who completed an apprenticeship showed higher resilience, academic confidence, self-efficacy, and greater concerns about balancing studies and work (t values ranging from 2.020 to 3.158, p < 0.05). Correlation analysis revealed a positive relationship between resilience (RQS) and coping with academic stress (CAS) (r = 0.632, p < .001), as well as between resilience and academic behavioral confidence (ABC) (r = 0.608, p < .001). Negative correlations were observed between resilience, coping with academic stress, academic confidence, and cognitive test anxiety (CTA) (r values from -0.235 to -0.404, p < .001). The findings emphasize the need for tailored support for students from diverse SES backgrounds and with varying expe-riences. The study highlights the value of a comprehensive approach in medical education, con-sidering the diverse backgrounds and experiences of students. Future research should explore the long-term impact of these factors on professional competencies and patient care, leveraging the diversity of the student body for a holistic educational experience.

This study aimed to investigate the impact of specific single nucleotide polymorphisms (SNPs) on clinical and laboratory outcomes in COVID-19 patients receiving Paxlovid treatment. The primary focus was on genetic variants in IFNAR2, OAS1, OAS3, and ACE2. Laboratory parameters were assessed at admission and discharge, including oxygen saturation, white blood cell count, absolute neutrophil and lymphocyte counts, erythrocyte sedimentation rate, platelet count, hematocrit, and various liver and kidney function tests. The results demonstrated significant associations between certain SNPs and clinical outcomes. Patients with the IFNAR2 rs2236757 G allele exhibited improved oxygen saturation and lower eosinophil counts. The OAS3 rs10735079 and OAS1 rs10774671 G allele was associated with lower eosinophil and total bilirubin levels. Furthermore, patients with the ACE2 rs2074192 C allele showed increased segmented neutrophils and AST levels, while the T allele was associated with lower total bilirubin levels. These findings indicate that the efficacy of Paxlovid treatment may be influenced by genetic variations in IFNAR2, OAS1, OAS3, and ACE2. Further research is warranted to investigate the potential therapeutic implications of these genetic markers.

Laboratories generate various forms of wastes which contribute to a complex network of profound and multifaceted environmental challenges and associated public health issues if not properly managed.Traditional laboratory practices particularly in developing countries, often lead to excessive waste generation, chemical contamination and resource depletion, coupled with inefficient waste management which poses risks to both ecosystem and public health. As the environmental impact of laboratory waste escalates, the need for effective waste management becomes increasingly important and urgent for safeguarding environmental health. This review examines the impact of laboratory waste management practices on environmental health and explores sustainable laboratory medicine as a mitigating response. Sustainable laboratory medicine adopts practices such as green laboratory principles involving waste minimization, resource conservation, the use of eco-friendly materials as well as energy-efficient protocols and innovative waste segregation and treatment technologies. This approach complies with regulatory standards as well as emphasizes proactive orientation towards environmental stewardship, operational efficiency and innovation while maintaining scientific integrity. Sustainable laboratory medicine appears to be a crucial framework that mitigates the environmental health impacts associated with laboratory-derived waste. This review advocates for a paradigm shift towards sustainable laboratory operations and emphasizes the need for comprehensive training, institutional commitment, and regulatory support.

The aim of this study is to characterize the compound extremes of rainfall and temperature in Côte d’Ivoire. For this purpose, we analyzed the outputs of fourteen (14) climate models from the CORDEX-Africa project. Results show an increase (approximately 4.3°C) of the surface temperature and a decrease (5,90 %) of the mean rainfall in the near (2036-2065) and far futures (2071-2100) over Côte d’Ivoire during January-February-March (JFM) period. The analysis of the compound extremes of wet/warm type highlights an increase in the frequency of this climatic hazard in the northern and central parts of the country during January-March (JFM) season in the near and far futures. The dry/warm mode will increase in the central and southern parts of the country during the near future and in the whole country during the far future. These increase in compound extremes could lead to an increase in droughts and natural disasters over the country and could have a negative impact on socio-economic activities, such as transportation and agricultural production. This work could provide decision support for political decision-makers in formulating future public policies for managing agricultural production, food security, and natural disasters.

Background and Objectives: The deltopectoral (DP) flap represents a reconstructive option for head and neck. It is a fasciocutaneous flap raised from the anterior chest wall below the clavicle. Its role partially declined with the arise of free flaps. However, it still remains a valid option in patients that could not undergo a reconstruction with free flaps. The aim of this retrospective study was to evaluate the role of the DP flap in head and neck reconstruction, with a focus on surgical outcomes and complications. Materials and Methods: Thirty-one patients who underwent head and neck reconstruction with DP flap were included in the study. The delayed technique was not used in any procedure to harvest the flap beyond the deltopectoral groove. The patients’ characteristics, the recipient site, the closure of the donor site and the flap-related complications were recorded. Results: The median time to autonomization of DP flap was 23 days. Post-operative complications were observed in 10 subjects (32.3%). A partial necrosis was seen in 5 patients (16.1%), while a complete necrosis developed only in one case (3.2%). The diabetes mellitus was the only parameter associated to post-operative complications. In particular, the percentage of necrosis in subjects with or without diabetes was 66.7% and 8.0%, respectively. Conclusions: The DP has a wide range of applications in head and neck reconstruction and a low complication rate can be observed. The delayed technique does not necessarily need to be applied, and the flap can be extended beyond the deltopectoral groove when necessary. However, patients with diabetes mellitus have a higher risk of postoperative necrosis of the distal portion of the flap.

Current standard of care for brain tumor management includes maximal safe surgical resection followed by concurrent chemotherapy and radiation therapy. Recent advances in image-guided surgical techniques have enhanced the precision of tumor resections, yet there remains a critical need for innovative technologies to further improve patient outcomes. The emerging use of theranostic technologies to improve surgical outcomes can further augment the efficacy of adjuvant radiosurgery/radiotherapy and systemic therapies. Stanford Neurosurgery is a leader in the field of translational neuro-oncology. In this review, we provide an expert view of how theranostics can be integrated into future therapeutic treatment algorithms to help improve survival for patients with brain tumors.

Microscale swimmers have to face the dominance of viscous forces over inertial forces, the so-called low Reynolds number (hereafter Re) regime. The undulatory motion of an elastic tail is one of the few possible mechanisms for the self-propulsion of microswimmers in the particular conditions of low Re. Instead of using a complex arrangement of multiple actuators along the body of the swimmer, this work studies the propulsion of a swimming microrobot that is able to generate a non-reciprocal motion by moving a passive elastic tail with non-uniform properties using only a single actuator located at its head. A simulation model is developed in MATLAB to evaluate the effect of different mass and elasticity distributions in the tail on the microrobot propulsion. The results are used to observe the undulating motion of the tail and to optimize the design of the robotic microswimmers in terms of efficiency.

As the primary secondary tree species in Northeast China, Quercus mongolica possesses significant ecological and economic value. This study employed the Biomod2 platform in conjunction with ArcGIS spatial analysis to assess the potential suitable habitat distribution area of Q. mongolica under current climatic conditions. Furthermore, it forecasted the distribution range and niche changes of potentially suitable habitats for Q. mongolica from 2022 to 2090, and pinpointed the key environmental factors influencing its distribution. The findings reveal that the total potential suitable area for Q. mongolica covers 74,994.792 km², predominantly spread across Inner Mongolia, Heilongjiang, Jilin, and other regions. The primary determinants of suitable area distribution were peak temperature of hottest month, lowest temperature of coldest month and altitude. Under future climate scenarios, the potentially suitable habitats of Q. mongolica are anticipated to diminish to varying extents, with the distribution center exhibiting a tendency towards northward migration. Concurrently, the overlap among different climate scenarios is predicted to expand over time. This investigation facilitates a comprehensive understanding of Q. mongolica's adaptation to climate change, enabling informed adjustments and serving as a valuable reference for the preservation and sustainable management of Q. mongolica populations.

This paper explores how smart cities can cope with land subsidence and liquefaction in the context of rapid urbanization in Japan. Since the 1960s, liquefaction has become an important topic in geotechnical engineering, and great efforts have been made to evaluate the resistance of soil to liquefaction. There is currently a lack of machine learning applications specifically for smart cities in areas such as geological hazards. This study uses two machine learning techniques, artificial neural networks and ensemble learning, to obtain a prediction model with high performance in predicting the bearing layer depth to improve the accuracy of geo-engineering surveys. The model was developed by analyzing actual survey data from 433 locations in Setegaya, Tokyo, by using artificial neural networks (ANNs) and bagging, respectively. The results show that machine learning has great advantages in predicting the bearing layer depth. In addition, compared with a single model such as artificial neural networks, the prediction performance of ensemble learning can be improved by about 20%. Both interdisciplinary approaches can help predict address risks and thus promote sustainable urban development, highlighting the potential of smart cities in the future.

The COVID-19 pandemic caused by the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus has exposed the vulnerabilities and unpreparedness of the global healthcare system in dealing with emerging zoonoses. In the past two decades, coronaviruses (CoV) have been responsible for three major viral outbreaks, and the likelihood of future outbreaks caused by these viruses is high and nearly inevitable. Therefore, effective prophylactic universal vaccines targeting multiple circulating and emerging coronavirus strains are warranted. This study utilized an immunoinformatic approach to identify evolutionarily conserved CD4+ (HTL) and CD8+ (CTL) T cells, and B-cell epitopes in the coronaviral spike (S) glycoprotein. A total of 132 epitopes were identified, with the majority of them found conserved in the bat CoV, pangolins CoV, endemic coronaviruses, SARS-CoV-2, and Middle East respiratory syndrome coronavirus (MERS-CoV). Their peptide sequences were then aligned and assembled to identify the overlapping regions. Eventually, two major peptide assemblies were derived based on their promising immune-stimulating properties. In this light, they can serve as lead candidates for universal coronavirus vaccine development, particularly in the search for pan-coronavirus multi-epitope universal vaccines that can confer protection against current and novel coronaviruses.

Non-viral mediated plasmid DNA transfection by electroporation (EP) is an established method for gene transfection. In this study, the usefulness of direct EP at an intradermal (i.d.) site (D_EP) with implanted electrodes to achieve a high protein expression level was investigated. In addition, D_EP application with various intervals with a low application voltage was also evaluated to confirm its effect on protein expression. A higher protein expression level was observed after green fluorescent protein (GFP)- and luciferase-encoding DNA were delivered by i.d. injection followed by D_EP application. When luciferase expression was observed with an in vivo imaging system, continuous expression was confirmed over 21 days after i.d. injection followed by D_EP at 100 V. This approach provided increased gene expression levels compared with conventional EP methods via the stratum corneum layer. In addition, the effect of application voltage on luciferase expression was investigated; two-time applications (repeated D_EP) at 20 V with 5 min intervals showed similar luciferase expression level to single D_EP application with 100 V. Histological observations showed the skin became thicker after a single D_EP at 100 V, whereas no apparent thickness changes was confirmed after repeated D_EP at 20 V with 5 min intervals. This study revealed that direct i.d. voltage application achieved high protein expression levels even at low voltages. Skin is a promising administration site for DNA vaccines, so this approach may be effective in DNA vaccine delivery into skin tissue.

Sentiment analysis is a pivotal tool for gauging the public’s perception and understanding of human communication across digital social media platforms. However, due to linguistic complexities and limited resources, sentiment analysis is not well-represented in many African languages. While benchmark Africa-Centric Pre-trained Language Models (PLMs) have been developed for various Natural Language Processing (NLP) tasks, their applications in eXplainable Artificial Intelligence (XAI) remain unexplored. In this study, we introduce a novel approach that combines Africa-centric PLMs with XAI techniques for sentiment analysis. We demonstrate that applying attention mechanisms and visualisation techniques improves the transformer-based model’s transparency, trustworthiness, and decision-making abilities when making sentiment predictions. We then employ the SAfriSenti—a multilingual sentiment corpus for South African under-resourced languages. We use the corpus to perform various sentiment analysis experiments and also enable comprehensive evaluations, comparing the performance of Africa-centric models against mainstream PLMs. The Afro-XLMR model outperformed all models and achieved an average F1-score performance of 71.04% across the five tested languages and the lowest error rate among the evaluated models. Additionally, we incorporated techniques like Local Interpretive Model-Agnostic Interpretation (LIME) and Shapley Additive Interpretation (SHAP) in the sentiment classifier’s output to enhance the Afro-XLMR model’s interpretability and explainability. As a result, the use of XAI strategies ensures that sentiment predictions are not only accurate and interpretable but also understandable, fostering trust and reliability in the decision-making of AI-driven NLP technologies, particularly in the context of African languages.

This paper critically reviews the convergence between Business Ecosystem Theory and Social Network Theory in sustainability studies. While both frameworks view organizations as part of larger, interconnected systems, they can be differentiated by six key dimensions: unit of analysis, focus, decomposability, types of relationships, market segment, and worldview. To better reflect real-world phenomena, this paper argues for a new stream of theoretical convergence that is practical, reliable, generalizable, and reproducible. Specifically, it proposes shifting from interoganizational networks to interfunctional networks, which reduces complexity, enhances stability over time, and provides a clearer theoretical distinction. This is illustrated through a case study of Tesla Inc.’s ecosystem, built from data presented in the company’s 10K form, which also serves as an example of the emergence of a new strategic construct named the Business Ecosystem Footprint. This construct could assist managers in understanding where their organization stands within the network of functions, guiding them in making informed decisions about resource allocation and diversification, specifically aimed at supporting financial goals as well as sustainability and decarbonization objectives. The article concludes by suggesting potential research agendas, such as automating ecosystem mapping, exploring the constraints of the new construct, and testing new hypotheses related to firm performance.

The rapid expansion of Bangladesh's financial infrastructure, coupled with the increasing digitization of banking services, underscores the critical importance of cybersecurity. Machine learning and deep learning methodologies have emerged as potent tools in combating cyber threats such as intrusion, malware, and fraud. By harnessing artificial intelligence and data-driven analysis, these techniques enable real-time scrutiny of vast banking data, facilitating proactive defense against cyberattacks. Bangladesh's evolving financial landscape, characterized by governmental digitalization initiatives and a national financial inclusion strategy, heightens the imperative for robust cybersecurity measures. This paper explores the application of machine learning and deep learning techniques in bolstering banking cybersecurity within the context of Bangladesh's burgeoning digital economy.

The integration of connected autonomous vehicles into the transportation system introduces significant enhancements in driving experience and convenience. Yet, it simultaneously raises important concerns regarding the security and privacy of passenger data. As individuals increasingly depend on these connected vehicles, particularly rental cars with advanced infotainment systems, safeguarding their personal information becomes a paramount imperative, presenting significant challenges that must be addressed to maintain user trust and comply with privacy regulations. This paper investigates risks associated with personal information stored in connected vehicle technology, emphasizing the importance of robust security and privacy practices. In the advent of cyber threats and the need for data protection, we examine a risk management framework (RMF) as suggested by NIST, which aims to address these quintessential concerns preemptively. Our research moves beyond the limitations of manual safeguarding methods, supporting the necessity for an advanced automated technical solution. To address these issues, we introduce and meticulously assess the efficacy of “Vehicle Inactive Profile Removal” (VIPR), an innovative technical solution conceived to actively eliminate the risks and potential oversights that stem from the prevalent tendency of renters to leave personal data unerased in the infotainment systems of rented connected vehicles. We provide a thorough evaluation of VIPR through various scenarios, including vehicle return to a rental depot, subsequent rentals, and ridesharing contexts. Our proof of concept includes an array of experiments to demonstrate how VIPR proficiently and autonomously removes previous renters’ “Inactive” profiles from a simulated infotainment system. The results highlight how VIPR constitutes a critical step towards enhancing the privacy and security of personal data, thereby promoting a safer, more responsible use of connected vehicle technology in society.

The earth infrastructure is the backbone of the global economy, connecting people, enhancing quality of life, and promoting health and safety. However, its vulnerabilities are becoming apparent due to climate change, mainly through frequent wetting and drying (wd) cycles. This study aimed to assess the impact of controlled w-d cycles on the hydromechanical properties of clayey and silty sand soils and its implications for the performance of a typical flood embankment. Volumetric changes were monitored during the w-d cycles. Soil water characteristic curve (SWCC), saturated hydraulic conductivity (ksat), effective cohesion (c’) and effective angle of internal friction (ϕ’) were measured at 1 and 10 w-d cycles. The results indicated that the 10 w-d cycles decreased the saturated moisture content and a flatter SWCC compared to the 1 w-d cycle for clayey soil. The ksat was also significantly higher at 10 w-d cycles than the 1 w-d cycle for clayey soil. An insignificant difference was found in both SWCC and ksat at 1 and 10 w-d cycles for silty sand soil. The ϕ’ for the clayey soil decreased from 28.5 to 20.1 as the wd cycles increased from 1 to 10, while the c’ remained unchanged at 10 kN/m2. On the other hand, for the silty sand soil, the ϕ’ increased from 34.6 to 37.5 with an increase in w-d cycles from 1 to 10, and the c’ remained constant at 1 kN/m2. Numerical modelling of transient water flow coupled with slope stability analysis revealed the dependence of flood embankment performance on the soil's hydromechanical properties and the flooding duration. These findings underscore the need for proactive measures to mitigate landslide risks in regions prone to frequent w-d cycles, thereby ensuring the safety and resilience of slopes and associated infrastructure.

The microvessel neurovascular unit with its brain endothelial cell (BEC) and blood-brain barrier remodeling is important in the development of impaired cognition in sporadic or late-onset Alzheimer’s disease (LOAD) and vascular dementia or vascular cognitive impairment and dementia including cerebral amyloid angiopathy in neurodegeneration. LOAD is considered to be the number one cause of dementia globally; however, when one considers the role of mixed dementia (MD) (the combination of both the amyloid cascade hypothesis and the vascular hypothesis of LOAD), it becomes apparent that MD is the number one cause. The microvessel BECs are the first cells in the brain to be exposed to the peripheral neurotoxins of the systemic circulation and are therefore the brain cells at the highest risk for early and chronic injury. Therefore, it is not surprising that microvessel BECs are the first cells to undergo injury and the response to injury wound healing mechanism and remodeling that is excessive and recurrent in the aging process plus other age-related diseases such as cerebro-cardiovascular disease, hypertension, type 2 diabetes mellitus, Parkinson’s disease, plus others. This narrative review explores the intricate relationship between microvessel remodeling, cerebral small vessel disease (SVD), and neurodegeneration as occurs in LOAD. Further, it discusses the current understanding of how microvessel dysfunction, disruption, and pathology contribute to the pathogenesis of LOAD and thus, highlights potential avenues for therapeutic interventions.

The growth of photosynthetic organisms requires specific ranges of temperature and photosynthetically active radiation that are technically difficult to achieve and control, especially in outdoors cultures. In such cases, a typical meteorological sequence can be a useful tool to estimate the growth of photosynthetic organisms. This work proposes a new methodology based on long-term meteorological sequences to simulate the growth of photosynthetic organisms. A case of study that addresses the simulation of the growth of microalgae (Chlorella vulgaris) in Riosequillo, north of the Madrid region (Spain), is shown for the four seasons of the year, and these estimates are then compared with the observed results of an experimental microalgae culture in domestic wastewater. The results also show great agreement with the probability distribution function of the biomass concentration per day, obtaining the best results for typical meteorological sequences of summer and spring. The methodology seems to confirm the representativeness of typical meteorological sequences and also allows the identification of the most likely production scenarios for the feasibility analysis of projects, which has potential application in decision-making processes.

The utilization of foam in contact with individuals often leads to its deterioration, necessitating periodic material changes to prevent degradation and maintain sanitary conditions. Foam, a porous plastic material formed by an aggregation of bubbles, offers lightweight and impact-absorbing properties, yet its porosity and susceptibility to wear pose challenges. The project's overarching goal is to develop a technological application for repurposing spent foam materials and textile elements from leisure facilities into impact absorption systems. This initiative aims to minimize environmental impact by reusing materials and leveraging their technical characteristics, including those of polyurethanes and textiles. By addressing the challenge of foam deterioration, the project seeks to create sustainable solutions. The development of impact absorption systems will involve the utilization of spent foam, either by reintegrating it into the system after its initial use or combining it with waste textiles. This innovative approach not only promotes sustainability but also enhances safety by ensuring the availability of high-quality impact-resistant elements. Through this endeavor, the project aims to contribute to both environmental conservation and the advancement of effective anti-impact measures in leisure facilities.

Damage to peripheral arteries by the atherosclerotic process accounts for about 3% of the world's population, which puts this problem in the category of major social problems. Modified lipoproteins and cholesterol crystals are known to accumulate in the arterial intima and cause the formation of proatherogenic macrophages, foam cells, and inflammation. Defective efferocytosis of apoptotic foam cells leads to the formation of a necrotic core, a sign of failure to resolve inflammation. Resolution of inflammation is mediated by specialized pro-resorption lipid mediators, proteins and signaling gases. Improving the balance between pro-inflammatory and anti-inflammatory factors contributes to the reverse development of local atherogenesis. Active direct intervention in the reconstruction of the adventitial layer of the arterial wall using cholesterol-affinity polysaccharide hydrogels containing a cocktail of growth factors creates conditions for the formation of additional extracellular matrix and reversal of cholesterol mass from the subintimal zone. Creating concentration and electrostatic gradients in the adventitia zone using a hydrogel may be one of the effective ways to degrade early soft atherogenic plaques and locally restore the damaged structure of the vessel wall. Growing scientific interest in the previously insufficiently studied adventitia indicates its important role in angionesis and atherogenesis.

Despite the existing effective treatment methods, tuberculosis (TB) is the second most deadly infectious disease globally, its carriers in the latent and active phases accounting for more than 20% of the world population. An effective method to control TB and reduce the mortality is regular population screening and diagnosis of the latent form of TB in order to take preventive and curative measures. Numerous methods allow diagnosing TB and directly detecting Mycobacterium tuberculosis (M.tb) biomarkers, including M.tb DNA, proteins, and specific metabolites, as well as antibodies produced by the host immune system in response to M.tb. PCR, ELISA, immunofluorescence and immunochemical analyses, flow cytometry, and other methods allow the detection of M.tb biomarkers or the host immune response to M.tb by recording the optical signal of fluorescent or colorimetric dyes included in the diagnostic tools. Current research in biosensors is aimed at increasing the sensitivity of detection, which can be achieved by using brighter and more photostable optical tags containing fluorescent quantum dots. Here, we review current methods for detection of M.tb biomarkers using optical sensor systems, primarily quantum dot–based nanosensors, and summarize M.tb biomarkers whose detection can be made significantly more sensitive by using quantum dot–based nanosensors.

This study assesses the alignment of Singaporean companies’ sustainability reporting with the newly introduced International Financial Reporting Standard S1, a global framework for sustainability-related financial disclosures. Given Singapore’s role as a major financial hub, understanding the extent to which local companies comply with this standard is critical to promoting transparency and accountability in sustainability practices. The study was conducted in two phases: the first phase was to summarize the timing of different countries’ preparations for the implementation of the IFRS S1 standard, as well as their attitudes. The second phase was a content analysis of the sustainability reports of 70 listed companies. The findings show that while companies are generally proactive in reporting governance, strategy, and metrics, they fall short in risk management disclosure, which is an important requirement of IFRS S1. This gap highlights the challenges companies face in incorporating comprehensive risk management practices into sustainability reporting. This study provides a reference for improving future sustainability reporting and encourages companies to align more closely with IFRS S1 to meet investors’ growing demand for transparent and standardized sustainability disclosures.

Medullary thyroid carcinoma (MTC) is a rare yet aggressive form of thyroid cancer, comprising a disproportionate share of thyroid cancer-related mortalities despite its low prevalence. MTC differs from other differentiated thyroid malignancies due to its heterogeneous nature, presenting complexities in both hereditary and sporadic cases. Traditional management guidelines, designed primarily for papillary thyroid carcinoma (PTC), fall short in providing the individualized care required for MTC patients. In recent years, the sheer volume of data generated from clinical evaluations, radiological imaging, pathological assessments, genetic mutations, and immunological profiles has made it humanly impossible for clinicians to simultaneously analyze and integrate these diverse data streams effectively. This data deluge necessitates the adoption of advanced technologies to assist in decision-making processes. Holomics, an integrated approach that combines various omics technologies, along with artificial intelligence (AI), emerges as a powerful solution to address these challenges. AI-driven precision oncology can significantly enhance the diagnostic work-up, staging, risk stratification, management, and follow-up care of MTC patients by processing vast amounts of complex data quickly and accurately. AI algorithms can identify patterns and correlations that may not be apparent to human clinicians, thereby improving the precision of personalized treatment plans. Moreover, the implementation of AI in MTC management enables the collation and synthesis of clinical experiences from across the globe, facilitating a more comprehensive understanding of the disease and its treatment outcomes. This global approach aligns with the United Nations Sustainable Development Goal 3, which aims to ensure healthy lives and promote well-being for all at all ages. By leveraging AI and holomics, we can strive towards making personalized healthcare accessible to every individual, regardless of their economic status, thereby improving overall survival rates and quality of life for MTC patients worldwide. In conclusion, the integration of holomics and AI in the management of medullary thyroid carcinoma represents a significant advancement in precision oncology. This innovative approach not only addresses the complexities of a rare and aggressive disease but also paves the way for global collaboration and equitable healthcare solutions, ultimately transforming the landscape of MTC treatment and care.

Vitamin D and iron deficiencies are the most prevalent micronutrient deficiencies among women of reproductive age (WRA) in Morocco. Recent studies suggest that Vitamin D deficiency (VDD) may reduce iron bioavailability necessary for erythropoiesis, potentially leading to iron deficiency (ID) and anemia. This study investigates the association between vitamin D status, iron levels, and anemia risk among Moroccan WRA aged 18-49 years. A cross-sectional study was conducted with 463 participants. Serum levels of 25(OH)D, blood count parameters, iron, ferritin, C-reactive protein, and creatinine were measured. Lifestyle factors, including dietary intake, sun exposure, and physical activity, were evaluated using validated questionnaires, and anthropometric data were collected. Linear and logistic regression models assessed the relationships between variables, while Receiver Operating Characteristic (ROC) curve analysis evaluated the predictive accuracy of VDD for ID and anemia. VDD (25(OH)D &lt; 20 ng/ml) was significantly associated with lower levels of hemoglobin, hematocrit, red blood cells, and ferritin (all p &lt; 0.01), suggesting a role of vitamin D in erythropoiesis and iron storage. Multivariate logistic regression showed that VDD increased the risk of anemia (OR: 7.17, 95% CI: 3.19-19.28, p &lt; 0.001), ID (OR: 2.20, 95% CI: 1.32-3.77, p = 0.007), and IDA (OR: 4.10, 95% CI: 1.73-12.08, p = 0.004). Dietary iron intake was inadequate among all participants, with minimal protective effect against anemia and ID (β(SE): -0.08(0.03), p = 0.030 and β(SE): -0.05(0.02), p=0.037 respectively). ROC analysis demonstrated moderate discriminative power for VDD in diagnosing IDA and anemia (AUC: 0.643 and 0.603) but reduced accuracy for ID (AUC: 0.575). This study identifies VDD as a significant risk factor for impaired iron status and anemia among Moroccan WRA, underscoring the need for targeted nutritional interventions and further research to explore effective prevention strategies.

Septic arthritis (SA) represents an orthopedics urgency and mainly affects the knee joint. Due to its devastating effects on cartilage, immediate management is crucial. SA is characterized by an an-nual incidence of 2 to 10 cases per 100,000 individuals, with mortality rates fluctuating between 0.5% and 15%, with a substantially higher mortality rate observed in older people (15%) in con-trast to younger cohorts (4%). The etiology of septic arthritis is multifactorial: a spectrum of Gram-positive and Gram-negative bacteria can contribute to the development of this condition, especially Staphylococcus aureus. The treatment involves urgent (arthroscopic or arthrotomic) debridement associated with adequate antibiotic therapy. Intra-articular antibiotic carriers can also be used to increase their local concentration and effectiveness. The case of a 67-years-old woman affected by knee SA from methicillin-susceptible S. aureus is presented. She was treated with an arthroscopic debridement enhanced by intra-articular antibiotic-loaded calcium sulphate beads, together with antibiotic therapy. At 2-year follow-up, the infection has been eradicated and the patient fully recovered. This is the first description, to our knowledge, in English Literature of the use of antibiotic-loaded calcium sulphate beads as an adjuvant in the surgical treatment of SA of a native knee joint.

In response to the problem of poor detection ability of object detection models for small-scale targets in intelligent transportation scenarios, a fusion method is proposed to enhance the features of small-scale targets, starting from feature utilization and fusion methods. The algorithm is based on the YOLOv4 tiny framework and enhances the utilization of shallow and mid level features on the basis of FPN, improving the detection accuracy of small and medium-sized targets; In view of the problem that the background of the intelligent traffic scene image is cluttered and there is more redundant information, the CBAM attention module is used to improve the attention of the model to the traffic target; To address the problem of data imbalance and prior bounding box adaptation in custom traffic datasets that expand traffic images in COCO and VOC, we propose a Copy Paste method with improved generation method and a K-means algorithm with improved distance measurement to enhance the model's detection ability for corresponding categories. Comparative experiments were conducted on a customized 260 thousand traffic dataset containing public traffic images, and the results showed that compared to YOLOv4 tiny, the proposed algorithm improved mAP by 4.9% while still ensuring the real-time performance of the model.