The emergence of resistance to first-line antimalarial drugs calls for development of new therapies for drug-resistant malaria. The efficacy of quinoline-based antimalarial drugs has prompted the development of novel quinolines. A panel of 4-aminoquinoline hydrazone analogues were tested on Plasmodium falciparum strains: IC50 values after a 48-hour cycle ranged from 0.60 - 49 µM, while the 72-hour cycle ranged from 26-219 nM on the multi-drug resistant K1 strain. Time-course assays were carried out to define the activity of the lead compounds which inhibited over 50 % growth in 24 hours and 90% growth in 72 hours. Cytotoxicity assays with HepG2 cells showed IC50 values of 0.87-11.1 M, whereas in MDBK cells IC50 values ranged from 1.66-11.7 M. High selectivity indices were observed for the lead compounds screened at 72 hours on P. falciparum. Analyses of stage-specificity revealed that the ring stage of the parasite life cycle were most affected. Based on antimalarial efficacy and in vitro safety profiles, lead compound 4-(2-benzylidenehydrazinyl)-6-methoxy-2-methylquinoline 2 was progressed to drug combination studies for the detection of synergism, with a combinatory index of 0.599 at IC90 for the combination of with artemether, indicating a synergistic antimalarial activity. Compound 2 was screened on different strains of P. falciparum (3D7, Dd2) which maintained similar activity to K1, suggesting no cross-resistance between multi-drug resistance and sensitive parasite strains. In vivo analysis with 2 showed suppression of parasitaemia with P. yoelii NL treated mice (20 mg/kg and 5 mg/kg).

This paper presents the design and realization of a simple and low-profile, 4-port Multiple-Input-Multiple-Output (MIMO) antenna operating in the mm-wave band supporting 5G communication technologies. As part of the design methodology, the initial stage involved the development of a conventional monopole patch antenna optimized for operation at 26 GHz, which is matched to 50 Ω stepped feed line. Afterward, a square-shaped Defected Ground Structure (DGS) with semi-circles slots on the edges is placed on the ground to improve the isolation and the circular and rectangular slots are incorporated as DGS to optimize the antenna impedance bandwidth. Etching semi-circular shaped slots on the ground plane achieved more then 34.2 dB isolation in the 26 GHz operating band. In addition, an arrangement of four symmetrical radiating elements is positioned orthogonally to minimize the antenna’s physical size and to improve the isolation. The proposed MIMO antenna overall dimension is 25 × 25 mm2, which is printed on Rogers 5880 substrate with a width of 0.787 mm and εr = 2.2. The proposed antenna covers the 5G mm-wave band with a 10 dB bandwidth ranging from 25.28 - 28.02 GHz, whereas the maximum gain attained for the purposed structure is 8.72 dBi. Moreover, the proposed design, simulated and measured with advantages such as high isolation, low ECC, simple and compact design, is a good candidate for usage areas such as smart devices, mobile phones, and sensors in 5G applications.

We have detected a large Nernst effect in the CDW state of the multiband organic metal α−(BEDT−TT)2KHg(SCN)4. We find that there exists a significant gradient of charge relaxation processes that can generate a sizeable contribution adding especially to the transverse thermoelectric signal. Apart from the phonon drag, the energy relaxation processes governing the electron-phonon interactions and the momentum relaxation processes governing the charge mobility of the q1D group of carriers have a significant role in observing the large Nernst signal in the CDW state. The emphasised momentum relaxation dynamics in the low field CDW state is a clear indicator of a significant carrier mobility that can lead to the largest Nernst signal in this state. The momentum relaxation is reduced with increasing angle and magnetic field, i.e., in the high field CDW state which is reflected in the smaller Nernst effect amplitude. In this case only the phonon drag and electron-phonon interactions are contributing to the transverse thermoelectric signal. Our findings advance and change the previous observations on the complex properties of this organic metal.

The prevalence of obesity or metabolic syndrome is increasing worldwide (“Globally metabodemic”). Approximately 25% of adult general population is suffering from nonalcoholic fatty liver disease (NAFLD) which has become serious health problem. Hepatic fibrosis is the most significant determinant of all cause and liver -related mortality in NAFLD. Noninvasive test (NIT) should be urgently required to evaluate hepatic fibrosis in NAFLD. Fibrosis-4 (FIB-4) index is the 1st triaging tool for excluding advanced fibrosis because of its accuracy, simplicity, and cheapness especially for general physicians or endocrinologists, although FIB-4 index has several drawbacks. Accumulating evidence has suggested that vibration controlled transient elastography (VCTE) and the enhanced liver fibrosis (ELF) test may become useful as the 2nd step after triaging by FIB-4 index. The leading cause of mortality in NAFLD is cardiovascular disease (CVD), extrahepatic malignancy, and liver-related diseases. NAFLD often complicates chronic kidney disease (CKD), resulting in increased simultaneous liver kidney transplantation (SLKT). FIB-4 index could be a predictor of not only liver-related mortality and incident hepatocullar carcinoma (HCC) but also prevalent and incident CKD, CVD, and extrahepatic malignancy. Although NITs as milestones for evaluating treatment efficacy have never been established, FIB- 4 index is expected to reflect histological hepatic fibrosis after treatment in several longitudinal studies. We here review the role of FIB-4 index as 1st step NIT in management of NAFLD.

In this work, magnetic CuFe₂O₄/Ag nanoparticles activated by porous covalent organic frameworks (COF) was fabricated to evaluate the heterogenous reduction of 4-nitrophenol (4-NP). The core-shell CuFe₂O₄/Ag@COF was successfully prepared by polydopamine reduction of silver ions on CuFe₂O₄ nanoparticles, followed by COF layer condensation. With integrating the intrinsic characteristics of the magnetic CuFe₂O₄/Ag core and COF layer, the obtained nanocomposite exhibited features of high specific surface area (464.21 m² g^-1), ordered mesoporous structure, strong environment stability, as well as fast magnetic response. Accordingly, the CuFe₂O₄/Ag@COF catalyst showed good affinity towards 4-NP via π-π stacking interactions and possessed enhanced catalytic activity compared with CuFe₂O₄/Ag and CuFe₂O₄@COF. The pseudo-first-order rate constant of CuFe₂O₄/Ag@COF (0.77 min^-1) is 3 and 5 times higher than CuFe₂O₄/Ag and CuFe₂O₄@COF, respectively. The characteristics of bi-catalytic CuFe₂O₄/Ag and the porous COF shell of CuFe₂O₄/Ag@COF made a contribution to improve the activity of 4-NP reduction. The present work demonstrated a facile strategy to fabricate COF activated nano-catalysts with enhanced performance in the fields of nitrophenolic wastewater treatment.

Orificed Hollow Cathodes are electric devices necessary for the functioning of common plasma thrusters for space applications. From their reliability mainly depends the success of a spacecraft’s mission equipped by electric propulsion. The development of plasma models is crucial in the evaluation of plasma properties within the cathodes that are difficult to measure due to the small dimensions. Many models, based on non-linear system of plasma equations, have been proposed in the open literature. These are solved commonly by means of iterative procedures. This paper investigates the possibility to solve them by means of Particle Swarm Optimization method. The results of the validation tests confirm the expected trends for all the unknowns; the confidence bound of the discharge current as function of mass flow rate is very narrow (2÷5V), moreover the results match very well the experimental data except at the lowest mass flow rate (0.08mg/s) and discharge current (1A), where the computations underpredict the discharge current to the utmost by 40%; the highest data dispersion regards the plasma density in the emitter region (± 20 % of the average value) and the wall temperatures (± 50K respect to the average values) of orifice and insert; those of the others variables are very tiny.

Monge-Ampere equations have important research significance in many fields such as geometry, convex geometry and mathematical physics. In this paper, under some superlinear and sublinear conditions, the existence of nontrivial solutions for a system arising from Monge-Ampere equations with two parameters is investigated based on Guo-Krasnosel'skii fixed point theorem. In the end, two examples are given to illustrate our main results.

Exercising surds to represent figures is a common practice in scientific and Engineering fields, especially in scripts where calculators are banned or unapproachable. Peter Chew Theorem make result becomes simple when dealing with converting Quadratic Surds. The substance of the Peter Chew Theorem lies in enabling the forthcoming generation to simple break problems related to Quadratic Surds more effectively, easing a direct comparison with contemporary results. By employing the Peter Chew Theorem, one can streamline the tutoring and literacy of math, particularly concerning second- order direct equations with constant portions. This theorem's objective aligns with Albert Einstein's famed quotation Everything should be made as simple as possible, but not simpler.

This study focuses on the formulation and analysis of a numerical method to compute singularly perturbed functional differential equations (SP-FDEs) involving large mixed shifts. SP-FDEs are a class of differential equations with both shifts and small perturbation parameter. Such equations arise in various scientific fields to model phenomena with memory effects and perturbed dynamics. In this particular study, the considered SP-FDEs involve large negative shift (delay) and large positive shift (advance). Dealing with large mixed shifts in SP-FDEs gives rise to challenges in terms of stability analysis, numerical methods, and convergence of a solution. In this paper, the influence of the large mixed shifts is treated by choosing a uniform mesh discretized in such a way that the term with the shifts lie on the nodal points. Then, using the Numerov’s finite difference method, the continuous problem is transformed into a finite difference scheme and the influence of the perturbation parameter is handled by introducing a fitting factor in the difference scheme. Stability estimate and convergence analysis of the developed scheme are investigated and proved. Numerical experiments are carried out to demonstrate the validity and applicability of the developed scheme. It is shown that the numerical scheme obtained in this work is parameter-robust of second order convergence rate.

L\'evy walks represent important modeling tools for variety of real life processes. Their natural scaling limits are known to be described by the so-called material fractional derivatives. So far these scaling limits were derived for spatially homogeneous walks, where Fourier and Laplace transforms represent natural tools of analysis. Here we derive the corresponding limiting equations in the case of position depending times and velocities of walks, where Fourier transforms cannot be effectively applied. In fact, we derive three different limits (specified by the way the process is stopped at an attempt to cross the boundary), leading to three different multi-dimensional versions of Caputo-Dzherbashian derivatives, which correspond to different boundary conditions for the generators of the related Feller semigroups and processes. Some other extensions and generalisations are analysed.

When 2−1/Q<p≤2, we establish the C^{0,1} and C^{1,α}-regularities of weak solutions to quasi-linear p-Laplacian type non-homogeneous equations in the Heisenberg group.

The methods for constructing solutions to integro-differential equations of the Volterra type are considered. The equations are related to fractional conformable derivatives. Explicit solutions of homogeneous and inhomogeneous equations are constructed and a Cauchy-type problem is studied. It should be noted that the considered method is based on the construction of normalized systems of functions with respect to a differential operator of fractional order.

Finding a solution for Euler's equations is a classic mechanics problem. This study revisits the problem with numerical approaches. For ease of teaching and research, a Maple code comprising 2 lines is written to find a numerical solution for the problem. The study's results are validated by comparing these with previous studies. Our results confirm the correctness of the principle of maximum moment of inertia of the rotating body, which is verified by thermodynamics. As an essential part of this study, the Maple code is provided.

The differential transformation, an approach based on Taylor's theorem, is proposed as convenient for finding exact or approximate solution to the initial value problem with multiple Caputo fractional derivatives of generally non-commensurate orders. The multi-term differential equation is first transformed into a multi-order system and then into a system of recurrence relations for coefficients of formal fractional power series. The order of the fractional power series is discussed in relation to orders of derivatives appearing in the original equation. Application of the algorithm to an initial value problem results in a reliable and expected outcome.

A method of solution to solve the compressible unsteady 3D Navier-Stokes Equations in cylindrical co-ordinates coupled to the continuity equation in cylindrical coordinates is presented in terms of an additive solution of the three principle directions in the radial, azimuthal and z directions of flow. A dimensionless parameter is introduced whereby in the large limit case a method of solution is sought for in the boundary layer of the tube. A reduction to a single partial differential equation is possible and integral calculus methods are applied for the case of a body force directed to the centre of the tube to obtain an integral form of the Hunter-Saxton equation. Also an extension for a more general body force is shown where in addition there is a rotational force applied.

Based on author's previous work [Sun, B. The Reynolds Navier-Stokes Turbulence Equations of Incompressible Flow Are Closed Rather Than Unclosed. Preprints 2018, 2018060461 (doi: 10.20944/preprints201806.0461.v1)], this paper proposed an explicit representation of velocity fluctuation and formulated the Reynolds stress tensor in terms of the mean velocity field. The proposed closed Reynolds Navier-Stokes turbulence formulations reveal that the mean vorticity is the key source of producing turbulence.

This paper shown that turbulence closure problem is not an issue at all. All mistakes in the literature regarding the numbers of unknown quantities in the Reynolds turbulence equations stem from the misunderstandings of physics of the Reynolds stress tensor, i.e., all literatures have stated that the symmetric Reynolds stress tensor has six unknowns; however, it actually has only three unknowns, i.e., the three components of fluctuation velocity. We shown the integral-differential equations of the Reynolds mean and fluctuation equations have exactly eight equations, which equal to the numbers of quantities in total, namely, three components of mean velocity, three components of fluctuation velocity, one mean pressure and one fluctuation pressure. That is why we claim in this paper, that the Reynolds Navier-Stokes turbulence equations of incompressible flow are closed rather than unclosed. This study may help to solve the puzzle that has eluded scientists and mathematicians for centuries.

In this paper, we pursue and investigate the solutions for fractional kinetic equations, involving Bessel-Struve function by means of their Sumudu transforms. In the process, one Important special case is then revealed, and analyzed. The results obtained in terms of Bessel-Struve function are rather general in nature and can easily construct various known and new fractional kinetic equations.

The growing attention for plug-in electric vehicles, and the associated high-performance demands, have initiated a development trend towards highly efficient and compact on-board battery chargers. These isolated ac-dc converters are most commonly realized using two conversion stages, combining a non-isolated power factor correction (PFC) rectifier with an isolated dc-dc converter. This, however, involves two loss stages and a relatively high component count, limiting the achievable efficiency and power density and resulting in high costs. In this paper a single-stage converter approach is analyzed to realize a single-phase ac-dc converter, combining all functionalities into one conversion stage and thus enabling a cost-effective efficiency and power density increase. The converter topology consists of a quasi-lossless synchronous rectifier followed by an isolated dual active bridge (DAB) dc-dc converter, putting a small filter capacitor in between. To show the performance potential of this bidirectional, isolated ac-dc converter, a comprehensive design procedure and multi-objective optimization with respect to efficiency and power density is presented, using detailed loss and volume models. The models and procedures are verified by a 3.7 kW hardware demonstrator, interfacing a 400 V dc-bus with the single-phase 230 V, 50 Hz utility grid. Measurement results indicate a state-of-the-art efficiency of 96.1% and power density of 2.2 kW/dm³, confirming the competitiveness of the investigated single-stage DAB ac-dc converter.

Blood testing is a crucial medical application. In this study, we applied Raman spectroscopy to test blood samples and obtained complete biological information, including the main components and compositions in these samples. Short-wavelength (532-nm green light) Raman scattering spectroscopy was conducted on samples of normal blood, abnormal blood in 3 types of preparation including whole blood, plasma, and serum, and the underlying information reflected by the biological characteristics detected in each sample type were analyzed. Raman spectroscopy results indicated that normal blood had high hemoglobin content, which suggests that hemoglobin is a major component of blood. Hemoglobin affects blood oxygen level. The characteristic peaks of hemoglobin were observed at 690, 989, 1015, 1182, 1233, 1315, and 1562–1649 cm−1. Analysis of plasma and serum samples indicated the presence of β-carotene, which exhibited characteristic peaks at 1013, 1172, and 1526 cm−1. In addition, surface-enhanced Raman spectroscopy was used to collect biological signals that are difficult to obtain in conventional Raman spectroscopy, including those of small molecules such as hormones, antibodies, and enzymes. Changes in biological information collected in this manner can be used as a basis for potentially diagnosing clinical diseases.

Multiple myeloma (MM) accounts for about 10 to 15% of all diagnosed hematologic malignancies and about 1-2% of all cancer cases. Approximately 80-90% of MM patients develop bone disease and the changes rarely regress. It is only possible to stop or slow their progression. A major role in bone destruction in MM is attributed to the Wnt signaling pathway, and its action can be modified by various types of interventions including training and diet. Therefore, the aim of this project was to evaluate the effects of a Nordic Walking (NW) training cycle and intermittent fasting (IF) on the levels of selected bone turnover markers associated with the Wnt pathway in patients with MM. Results from 35 patients divided into training (NW and IF NW) and non-training (IF and control) groups were included in the analysis. A 6-week training cycle involving 60-minute workouts 3 times a week was conducted. Body mass and composition and the levels of: vitamin D, calcium and phosphorus, beta2-microglobulin and albumin were examined before and after completion of training cycle. Markers of bone turnover were also determined: sclerostin (SOST), Dickkopf-related protein 1 (DKK-1), osteoprotegrin (OPG), osteopontin (OPN) and Tartrate-resistant acid phos-phatase 5b (TRACP 5b). There was no negative effect of IF or combined training and fasting on the nutritional status of the patients (the level of albumines was unchanged). Both training groups showed an increase in serum concentrations of the active metabolite of vitamin D (IF NW and NW: p=0.001 and p=0.022, re-spectively). The change in the concentration of this vitamin negatively correlated with the con-centration of TRACP 5b (r=-0.413, p=0.014). Evaluating the concentrations of markers related to bone turnover, a reduction in the concentrations of SOST (time: p=0.026, time vs. group: p=0.033) and TRACP 5b (time: p

The objective was to evaluate the effect of 3-nitrooxypropanol (3-NOP) in combination with dif-ferent feed additives on growth performance, carcass traits, meat quality, enteric methane (CH4) emissions, nutrient intake and digestibility, and blood parameters in feedlot beef cattle. In ex-periment (Exp.) 1, one hundred sixty-eight Nellore bulls (initial bodyweight (BW) 410 ± 8 kg) were allocated to 24 pens in a completely randomized block design. In Exp. 2, thirty Nellore bulls (Initial BW 410 ± 3 kg) were allocated to a collective pen in a completely randomized design. Three treatments were applied: Control (CTL): Sodium monensin (26 mg/kg of dry matter, DM), M3NOP: CTL with 3-NOP (100 mg/kg DM) and Combo: 3-NOP (100 mg/kg DM) with essential oils (100 mg/kg DM), 25-Hydroxy-Vit-D3 (0.10 mg/kg DM), organic chromium (4 mg/kg DM), and zinc (60 mg/kg DM). In Exp 1, bulls in Combo had greater (P

In the present study, linear novel polymer poly(1-(2-((3-amino-2-hydroxypropyl)amino)ethyl)-1'-ethyl-[4,4'-bipyridine]-1,1'-di-ium) (poly(AHAEBD)) and its complex with iron (ΙΙΙ) ([Fe(poly(AHAEBD)2].Na3) were synthesized and then their anticancer effects on A375 human malignant melanoma cells line were evaluated. The structure of the synthesized compounds was confirmed using Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (1HNMR), field emission scanning electron microscopy (FE-SEM), X-ray energy diffraction analysis (EDS) and gel permeation chromatography (GPC). Also, the cytotoxicity of cisplatin as a reference, on A375 melanoma cell line was tested. The IC50 of polymer-complex [Fe(poly(AHAEBD)2].Na3 (0.71 µg/mL), cisplatin (4.58 µg/mL) and poly(AHAEBD) (1.73 µg/mL) were obtained. Our results revealed that the polymer-complex [Fe(poly(AHAEBD)2].Na3 exhibited better performance compared to cisplatin. Furthermore, the coordination with iron (III) enhanced the cytotoxicity levels of poly(AHAEBD). According to these findings, the synthesized polymer-complex demonstrates remarkable potential as an anti-cancer agent. This study could provide the basis for future research focused on employing this new polymer-complex for in vivo testing, highlighting its potential for therapeutic applications.

Diagnosis of neonatal sepsis is difficult as signs and symptoms are nonspecific. Interleukin-6 (IL-6) is a promising marker for neonatal sepsis. We aimed to test the accuracy of IL-6 in term and preterm infants after 72 hours of life (late-onset sepsis-LOS). We searched for IL-6 diagnostic accuracy studies between 1990 and 2020 using the PubMed database. Study selection was performed. The range of reported IL-6 sensitivities and specificities was 68% to 100% and 28% to 100%, respectively, the median values were 85.7% and 82% from 15 studies including 1306 infants. Subgroup analysis was performed. Sensitivity (87% vs 82%), but not specificity (both 86%), was better in preterm infants than in preterm and term infants. Early sample collection had the highest sensitivity (84%), but the lowest specificity (86%). To assess quality we used a STARD checklist adapted for septic neonates. Limitation of this review include the heterogeneous group of studies on the one side and the small number of studies on the other side that analyzed different combinations of biomarker. We concluded that IL-6 had a good performance especially in the preterm infant population and best results are achieved by measurements at the time of LOS suspicion.

ProAKAP4, a precursor of AKAP4 (A-kinase anchor protein) found in the flagellum of mammalian and non-mammalian spermatozoa, serves as a structural protein with established correlations to motility parameters across diverse species. This study aimed to determine the proAKAP4 levels evolution in thawed stallion semen over a 3-hour period, examining its correlation with motility descriptors and mitochondrial membrane potential. Utilizing sixteen ejaculates from four French warmblood stallions, the study involved maintaining thawed samples at 37°C for 3 hours, conducting proAKAP4 enzyme-linked immunosorbent assay (ELISA), computer-assisted sperm analysis (CASA), and mitochondrial membrane potential by JC-1 probe and flow cytometry at 0, 1, and 3 hours post-thawing. The findings indicate significant positive correlations (p≤0.05) between proAKAP4 levels and sperm total or progressive motility at all time points analyzed. Spermatozoa velocity descriptors (VAP, VCL, VSL) and spermatozoa lateral head displacement (ALH) display positive correlations (p≤0.05) with ProAKAP4 at the 0-hour post-thawing. ProAKAP4 concentration exhibits no discernible difference between batches with or without cryoprotectant. Notably, proAKAP4 consumption remains insignificant within the initial hour after thawing but becomes significant (p≤0.05) between 1 and 3 hours post-thawing. In summary, proAKAP4 demonstrates positive correlations with total and progressive motility in stallion semen for up to 3 hours after thawing, albeit showing a noticeable decrease starting from the first hour post-thawing, indicating a progressive consumption as a result of spermatozoa motile activity.

Authorities and governmental bodies strongly emphasize the importance of residents preparing for natural disasters, particularly underscoring the significance of readiness for geophysical hazards like earthquakes. In this study, which represents comparative quantitative research, the levels and predictors of the impact on preparedness for earthquake-induced disasters in South-Eastern Europe countries such as Montenegro, North Macedonia, and Serbia are examined. Using the snowball sampling technique (online questionnaire), a survey of 1245 respondents (Montenegro (n = 400), North Macedonia (n = 345), and Serbia (n = 500) was conducted from February 2023 to February 2024. The paper is based on the central hypothesis that the most significant predictor of earthquake preparedness in Montenegro, North Macedonia, and Serbia is age, followed by gender and education. Multivariate regression analysis was used to determine the extent to which five scores of the subscales (household preparedness, community preparedness, disaster preparation, earthquake risk awareness, reinforced house) were associated with seventh demographic and socio-economic variables. In addition to the mentioned analysis, other statistical analyses such as T-test, one-way ANOVA analysis, and Pearson correlation were also utilized. The results indicate that age emerges as a predictor in various aspects of earthquake-induced disaster preparedness and awareness in most models, followed by education. These findings confirm the significance of respondents' age in determining levels of preparedness and earthquake awareness. Overall, in North Macedonia, respondents recorded the highest ratings (M = 3.52) for household preparedness for earthquakes, compared to Montenegro (M = 2.98) and Serbia (M = 3.26), where the lowest ratings were recorded. Research findings, taking into account cultural characteristics, can serve as a basis for the development of targeted interventions, strategies, policies, and programs aimed at improving the level of societal preparedness for earthquake-induced disasters.

The consumption of insects in the Democratic Republic of Congo is an ancient practice. The taxonomic identification and characterization of “entomophagy” seem urgent in Kinshasa following the related anthropogenic pressures (demographic pressure, uncontrolled urbanization) leading to a food crisis. This study aims to assess the diversity of edible insects and their consumption by the population of Kinshasa. A total of 360 people were surveyed to identify the insect species consumed in Kinshasa, the ecosystems that provide them, and the preference for species in relation to ethnolinguistic groups, churches (faith) and household size. Three species of insects most consumed in Kinshasa are: Gonimbrasia jamesonii, Cirina forda and Brachytrupes membranaceus. 41.9% of these insects are consumed by the Kongo ethno-linguistic group, 23.6% by the Luba, 20.6% by the Ngala and 13.9% by the Swahili. Inhabitants of the communes of Kassa Vubu (57%), Maluku (54%), Masina (54%) and Mont-Ngafula (39%) mainly consume C. forda and G. jamesonii. Luba and Kongo ethnolinguistic groups mainly consume C. forda while the Swahili and Ngala consume G. jamesonii. Catholic, Revivalist Church, Kimbagu, Islam, Protestant and Johovah's Witness believers mainly consume C. forda and G. jamesonii. This study made it possible to understand the socio-cultural influence on the degradation (pressure) of biodiversity and; contributes to SDGs 2 and 12 by 2023..

Considering the unquestionable role of education in economic development, it has an impact at a macroeconomic level—contributing to enhancing productivity and innovation, reducing poverty and promoting social cohesion—and at a personal level—ensuring the improvement of knowledge, skills and individual capabilities and promoting social values like empowerment and equality. Notably, quality education is recognized as one of the Sustainable Development Goals (SDGs), which, jointly with other behaviors and attitudes, could impact the development of societies in other fields like health and well-being, cultural preservation, environmental sustainability and even peace and stability—all of them also listed as SDGs. However, the capacity, or not, to reach higher levels of compliance with quality in education (SDG 4) varies from country to country, according to the 2023 Sustainable Development Report results. Thus, the present study used a fuzzy set qualitative comparative analysis to assess the conditions for attaining higher levels of quality education based on the different indicators used to measure SDG 4. The analysis will allow comparisons of results among different countries and provide information about the initiatives that could be relevant to increasing quality education worldwide and for policymakers.

The Omicron EG.5 lineage of SARS-CoV-2 is currently on a trajectory to become a dominant strain. This phase 2 study aims to evaluate the immunogenicity of SCTV01E-2, a tetravalent protein vaccine, with a specific emphasis on its effectiveness against Omicron EG.5, comparing it with its progenitor vaccine, SCTV01E (NCT05933512). As of September 12, 2023, 429 participants aged ≥18 years were randomized to SCTV01E (N=215) or SCTV01E-2 (N=214) groups. Both vaccines showed increases in neutralizing antibody (nAb) against Omicron EG.5, with a 5.7-fold increase and a 9.0-fold increase in SCTV01E and SCTV01E-2 groups 14 days post-vaccination, respectively. The predetermined statistical endpoints were achieved, showing that the geometric mean titer (GMT) of nAb and the seroresponse rate (SRR) against Omicron EG.5 were significantly higher in the SCTV01E-2 group compared to SCTV01E. Additionally, SCTV01E and SCTV01E-2 induced a 5.5-fold and a 5.9-fold increase of nAb against XBB.1, respectively. Reactogenicity was generally mild and transient. No vaccine related SAEs, AESIs or deaths were reported. In summary, SCTV01E-2 elicited robust neutralizing responses against Omicron EG.5 and XBB.1 without safety concerns, underlining its potential as a versatile COVID-19 vaccine against SARS-CoV-2 variants.

Adult T-cell leukemia (ATL) is an aggressive hematologic disease caused by human T-cell leukemia virus type 1 (HTLV-1) infection. Various animal models of HTLV-1 infection/ATL have been established to elucidate the pathogenesis of ATL and develop appropriate treatments. For analyses employing murine models, transgenic and immunodeficient mice are used because of the low infectivity of HTLV-1 in mice. HTLV-1 Tax and HBZ transgenic mice spontaneously develop tumors, and roles for both Tax and HBZ in cell transformation and tumor growth have been established. Severely immunodeficient mice were able to engraft ATL cell lines and have been used in preclinical studies of candidate molecules for the treatment of ATL. HTLV-1-infected humanized mice with an established human immune system are a suitable model to characterize cells in the early stages of HTLV-1 infection. This review outlines the characteristics of mouse models of HTLV-1 infection/ATL and describes progress made in elucidating the pathogenesis of ATL and developing related therapies using these mice.

Ash dieback (ADB), caused by the invasive fungal pathogen Hymenoscyphus fraxineus, poses a significant ecological and economic challenge across Europe. Fraxinus excelsior (European ash), a key component of forest ecosystems, has experienced mortality rates reaching up to 85% in affected regions, severely threatening its ecological role and economic value. This study examines the relationship between the phenological traits of ash clones, particularly the timing of spring bud burst, and their susceptibility to H. fraxineus infection. The study was conducted in a clonal seed orchard located in northeastern Poland, encompassing 31 ash clones from different bioclimatic regions. Phenological observations of bud burst were carried out from early April to late May during the years 2018-2020, and crown damage and de-foliation levels were assessed multiple times throughout the growing season. The results confirm that clones with earlier bud burst exhibit significantly higher survival rates and reduced crown damage. It was found that the timing of bud burst is strongly correlated with susceptibility to ash dieback, suggesting that phenological timing is a crucial factor in the selection of genotypes resistant to ash dieback. Statistical analyses, including ANOVA and mixed models, revealed significant differences in susceptibility to infection among clones from different bioclimatic regions. Furthermore, the study high-lights the potential of breeding strategies focused on these traits to enhance the resilience of ash popula-tions. These findings are critical for the development of effective forest management practices aimed at conserving ash resources and maintaining biodiversity in the face of climate change and the ongoing spread of the pathogen.

Type-2 diabetes mellitus (T2DM) have been strongly associated with single nucleotide polymorphisms (SNPs) in the TCF7L2 gene. This study investigated the association between rs12255372, rs7903146 and T2DM in a Ghanaian population. A case-control study design was used for this study. A total of 106 T2DM patients and 110 control participants were selected. Basic data collected included body mass index, blood pressure and socio-demographics. Fasting blood samples were collected and used for serum lipid analysis, HbA1c, plasma glucose estimation and DNA extraction. Common and allele-specific primers were designed for genotyping using the Modified Tetra-Primer Amplification assay. Associations were evaluated using logistic regression models. The rs7903146 risk variant was significantly associated with 2.16 vs 4.06 increased odds for T2DM in patients <60 years vs ≥60 years. Both rs7903146 and rs12255372 are significantly associated with increased odds of T2DM in women, overweight/obese; T2DM negative family history (T2DM-NFH) and low-HDL-C. In a multivariate model, rs7903146 but not rs12255372 was significantly associated with 2.18, 5.01 and 2.25 increased odds of T2DM, under the codominant, recessive and additive model, respectively (p<0.05). The association between rs7903146 and rs12255372 with T2DM is more highly associated in a subgroup- women and those with T2DM-NFH, yet have cardiometabolic risk.

Carbapenem antibiotics are the drug of choice for treating multidrug-resistant bacterial infections. Metallo-beta-lactamases (MBLs) are carbapenemase capable of hydrolyzing nearly all therapeutically available beta-lactam antibiotics. Consequently, a need to assess the frequency and phenotypic resistance phenomena of two MBL genes in diarrheal and urinary tract infections (UTIs). Samples were collected through a cross-sectional study, with MBLs genes detected via PCR. Two hundred twenty eight diarrheal bacteria were isolated from 240 samples. The most predominant pathogens were Escherichia coli (32%) and Klebsiella spp. (7%). Phenotypic resistance to amoxicillin-clavulanic acid, aztreonam, cefuroxime, cefixime, cefepime, imipenem, meropenem, gentamicin, netilmicin, and amikacin was 50.4%, 65.6%, 66.8%, 80.5%, 54.4%, 41.6%, 25.7%, 41.2%, 37.2%, and 42.9%, respectively.  Total 142 UTI pathogens were obtained from 150 urine samples, with Klebsiella spp. (39%) and Escherichia coli (24%) are the major pathogens. Phenotypic resistance to amoxycillin-clavulanic acid, aztreonam, cefuroxime, cefixime, cefepime, imipenem, meropenem, gentamicin, netilmicin, and amikacin was 93.7%, 75.0%, 91.5%, 93.7%, 88.0%, 72.5%, 13.6%, 44.4%, 71.1%, and 43%, respectively.  Twenty four diarrheal isolates carried either blaNDM-1 or blaVIM genes; the overall MBL gene prevalence was 10.5%. Thirty six UTI pathogens carried either blaNDM-1 or blaVIM genes (25.4%). Seven isolates carried both blaNDM-1 and blaVIM genes.  MBL genes exhibited a strong association with phenotypic carbapenem and other beta-lactam antibiotic resistance. Resistance to carbapenems requires active surveillance and stewardship.

Bulk composition, mineralogy and microchemistry of various fractions of the filling of the Crater No. 4 at Emmerting were investigated. Here we present mainly the fine fractions, which, in contrast to pebbles larger than ca. 4 cm, are relatively poor in material affected by melting. A 0.1 mm long meteorite fragment without ablation features was found, and remelted fragments of the same body have been identified. The projectile was dominated by enstatite, also containing forsterite, basic plagioclase, Ni-rich pyrrhotite and troilite, kamacite, silica, and probably merrillite. The molten fragments contain porous Mg-rich glass (indicating temperature &gt; 1500 °C), minor Fe oxides, and occasionally uncommon Ni-rich minerals. The bulk composition and electron microprobe show that the amount of meteoritic material is low (&lt;&lt; 1 %), and it is not unequivocally manifested even in platinum-group elements abundances and osmium isotope ratios (the latter, however, were only measured in two samples). This can be explained by dilution of the filling by particles brought after the crater formation, and by probably achondritic composition of the projectile. Relatively large hollow spheroid Fe oxide particles were observed in thin sections from the magnetic fraction. A Mn oxide hollow spherule has also been found. In magnetically separated filling from the nearby Crater No. 5, bulk chemical composition points to contamination with several metals and metalloids probably due to influence of recent alluvial sediments. Therefore, the extent of meteoritic contamination in this crater may be even smaller.

This study delves into the Southern Aegean region where the subduction of the oceanic Mediterranean lithosphere under the Aegean continental one takes place. This region is considered one of the most active ones in the Eastern Mediterranean Sea due to intense tectonic movements in the Late Quaternary. More than 1200 manually revised events from 2018 to 2023 have been used in order to obtain the 3-D structure of body-wave velocity and VP/VS ratio to 80 km depth, through Earthquake Tomography. A series of resolution tests have been performed and demonstrated fair resolution of the derived velocity structures in area of interest. The derived anomalies of body waves (dVP, dVS), and VP/VS ratio provided important information about the Southern Aegean regional tectonics, and secondarily active faults of smaller scale (&gt;20 km). The region is marked by significant low-velocity anomalies in the crust and uppermost mantle, beneath the active arc volcanoes. The seismicity related to the Hellenic Subduction Zone (HSZ) is connected to a low-angle positive anomaly of VP and VS, correlated to the observed intermediate-depth seismicity (H≥40 km) in this part of the study area. This result could be related to the diving HSZ slab.

A two-link model of exoskeleton with variable-length links for supporting the lower limbs of the human musculoskeletal system is proposed in the article. The researched model differs from the existing ones by the variable-length links, and by the angle calculation method. While in the existing models, the angles are calculated from the regular direction – from vertical, or from horizontal, - in the proposed research they are calculated between the links. As for practical exoskeleton implementation, the proposed method of angle calculation is appropriate to the actual working conditions of the electrical motors with the reduction gears installed in the hinges, which change the angles between the links. The mathematical model in the form of the system of Lagrange differential equations of the second kind is obtained. The obtained mathematical model is examined for existence and uniqueness of the Cauchy solution. The kinematic trajectory of the link motion has been synthesized. The controlling actions required for its implementation have been found.

We present a cost- and time-efficient method for the controlled preparation of single phase La(IO3)3 nanoparticles via a simple soft-chemical route which takes a matter of hours, thereby providing an alternative to the common hydrothermal method which takes days. Nanoparticles of pure α-La(IO3)3 and pure δ-La(IO3)3 were synthesised via the new method depending on the source of iodate ions, thereby demonstrating the versatility of the synthesis route. The crystal structure, nanoparticle size-dispersal and chemical composition were characterised via angle- and energy-dispersive powder X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy.

The rapid proliferation of information in the digital era underscores the importance of accurate historical representation and interpretation. While artificial intelligence (AI) has shown promise in various fields, its potential for historical fact-checking and gap-filling remains largely untapped. This study evaluates the performance of three large language models (LLMs)—GPT-3.5, GPT-4, and Google- BARD—in the context of predicting and verifying historical events based on given data. A novel metric, "Distance to Reality" (DTR), is introduced to assess the models' outputs against established historical facts. The results reveal a substantial potential for AI in historical studies, with GPT-4 demonstrating superior performance. This paper underscores the need for further research into AI's role in enriching our understanding of the past and bridging historical knowledge gaps.

We address the dynamics of two-dimensional Navier-Stokes models with infinite delay and hereditary memory, whose kernels are a much larger class of functions than the one considered in the literature, on a bounded domain. We prove the existence and uniqueness of weak solutions by means of Faedo-Galerkin method. Moreover, we establish the existence of global attractor for the system with the existence of a bounded absorbing set and asymptotic compact property.

The erosion of surface pipelines induced by proppant flowback during shale gas production is significant. The surface pipelines in a shale gas field in the Sichuan Basin experienced perforation failures after only five months of service. To investigate the erosion features of L360N, coatings, and ceramics and optimize the selection of two protective materials, a gas-solid two-phase flow jet erosion experimental device was used to explore the erosion resistance of L360N, coating, and ceramic under different impact velocities (15 m/s, 20 m/s, and 30 m/s). An energy dispersive spectroscope, a scanning electron microscope, and a laser confocal microscope were employed to analyze erosion morphologies. With the increase in flow velocity, erosion depth and erosion rate of L360N, coating, and ceramic increased and peaked under an impact velocity of 30 m/s. Maximum erosion rate and maximum erosion depth of L360N were respectively 0.0350 mg/g and 37.5365 µm. Its primary material removal mechanism was plowing of solid particles and microcracks were distributed on the material surface under high flow velocities. Maximum erosion rate and maximum erosion depth of coating were respectively 0.0217 mg/g and 18.9964 µm. Its primary material removal mechanism was the detachment of the binder phase Co caused by plowing. Maximum erosion rate and maximum erosion depth of ceramics were respectively 0.0108 mg/g and 12.4856 µm. The erosion mechanisms were micro-cutting and plowing. Under different particle impact velocity, different erosion morphologies were observed, but the primary erosion mechanism was the same. The erosion resistance of ceramics was higher than that of coating. Therefore, ceramic lining materials could be used to protect the easily eroded parts, such as pipeline bends and tees, and reduce the failure rate by more than 93%. The study provided the data and theoretical basis for the theoretical study on oil and gas pipeline erosion and pipeline material selection.

.Halophyte species are rich in bioactive compounds, antioxidant, and antimicrobial properties. However, due to the limited tech-nical-scientific data regarding these properties in the halophyte Salicornia neei, this research aimed to analyze micronutrients, chlorophyll, carotenoids, and activities of S. neei extracts using solvents of different polarities and plant organs (leaf, stem, and root) as free radical scavengers and antimicrobial agents. The fresh plant was collected and subsequently, pigments and micro-nutrients were determined by spectrophotometry and ICP, respectively. From the prepared extracts, antioxidant activity was de-termined by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging method and antimicrobial activity by the disc diffusion method for fungi and bacteria. The results obtained demonstrated that the native Brazilian halophyte S. neei can be considered a food rich in minerals and pigments with excellent antioxidant properties, showing inhibition 96.72% and IC50 (4.15 mg/mL). For free radical scavenging capacity, the most effective solvent was ethanol: acetone (1:1) and there was no significant difference (p

Additive manufacturing (AM) technologies show potential for the development of functionally integrated lightweight designs, biomimetic structures and material savings. Typically, as-built surfaces show powder particle agglomerations and re-entrant features, leading to rough surfaces, which are associated with poor fatigue performance. To benefit from the full range of advantages with special focus on aerospace applications, critical features for crack initiation when subjected to fatigue loading need to be identified and mitigated. A first step toward achieving this goal is the surface texture characterisation based on the quantification of surface features. In this paper, selected areal height, functional and feature parameters from ISO 25178-2:2022 are generated and process-specific features are examined for as-built AlSi7Mg0.6 from laser powder bed fusion (PBF-LB). A connection with the particle size distribution of the used powder is demonstrated. It is shown that surface feature analysis opens up opportunities to use physically meaningful surface characteristics in future quality assurance and part qualification processes.

Currently, most deep learning methods cannot solve the problem of scarcity of industrial product defect samples and significant differences in characteristics. This paper proposes an unsupervised defect detection algorithm based on a reconstruction network, which is realized using only a large number of easily obtained defect-free sample data. The network includes two parts: image reconstruction and surface defect area detection. The reconstruction network is designed through a fully convolutional autoencoder with a lightweight structure. Only a small number of normal samples are used for training so that the reconstruction network can be A defect-free reconstructed image is generated. A function combining structural loss and L1 loss is proposed as the loss function of the reconstruction network to solve the problem of poor detection of irregular texture surface defects. Further, the residual of the reconstructed image and the image to be tested is used as the possible region of the defect, and conventional image operations can realize the location of the fault. The unsupervised defect detection algorithm of the proposed reconstruction network is used on multiple defect image sample sets. Compared with other similar algorithms, the results show that the unsupervised defect detection algorithm of the reconstructed network has strong robustness and accuracy.

Micro- and nanoflowers are a class of materials composed of particles with high surface-to-volume ratio. They are being extensively studied in the last decade due to simple preparation protocols and promising applications in biosensing, as drug delivery agents, for water purification and so on. Flowerlike objects, due to their highly irregular surface, may act also as plasmonic materials, providing resonant coupling between optical waves and surface plasmon excitations. This fact infers for the possibility to use micro- and nanoflowers as effective surface-enhanced Raman scattering (SERS) substrate materials. Here, we report on the design and Raman enhancement properties of silver flowerlike structures, deposited on aluminum surface. A simple and cost-effective fabrication method is described, which leads to SERS substrates of high developed surface area. The morphology of the silver flowers on a nanoscale is characterized by self-organized quasiperiodic stacks of nanosheets, which act as plasmonic cavity-resonators. The substrates were tested against rhodamine-6G (R6G) water solutions of concentration varying between 10^–3 M and 10^–7 M. Optimal SERS enhancement factors of up to 10⁵ were established at R6G concentrations in the range 10^–6 – 10^–7 M.

Background: Nowadays investigations in the field of dental implants engineering are focused on bioactivity and osseointegration properties.Objective: In this study, the oxide-covered titanium was functionalized by vitamin D3 molecules via a simple self-assembly method with the aim to design more corrosion resistant and at the same time more bioactive surface.Methods: Surface properties of the D3-coated titanium were examined by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy, and contact angle measurements, while a long-term corrosion stability during immersion in an artificial saliva solution was investigated in situ by electrochemical impedance spectroscopy.Results: Results of all techniques confirmed a successful formation of the D3 vitamin layer on the oxide-covered titanium. Besides very good corrosion resistivity (~5 MΩcm² ) the D3-modified titanium surface induced spontaneous formation of biocompatible bone-like calcium phosphates (CaP).Conclusion: Observed in vitro CaP-forming ability as a result of D3-modified titanium/artificial saliva interactions could serve as a promising predictor of in vivo bioactivity of implant materials.

High-resolution laboratory-based thermal infrared spectroscopy is an up-and-coming tool in the field of geological remote sensing. Its spatial resolution allows for detailed analyses at centimeter to sub-millimeter scale. However, this increase in resolution creates challenges with sample characteristics such as grain size, surface roughness and porosity that can influence the spectral signature. This research explores the effect of rock sample surface preparation on the TIR spectral signatures. We applied three surface preparation methods (split, saw and polish) to determine how the resulting differences in surface roughness affects both the spectral shape as well as the spectral contrast. The selected samples are a pure quartz sandstone, a quartz sandstone containing a small percentage of kaolinite, and an intermediate-grained gabbro. To avoid instrument or measurement type biases we conducted measurements on three TIR instruments, resulting in directional hemispherical reflectance spectra, emissivity spectra and bi-directional reflectance images. Surface imaging and analyses were performed with scanning electron microscopy and profilometer measurements. We demonstrate that surface preparation affects the TIR spectral signatures influencing both the spectral contrast as well as the spectral shape. The results show that polished surfaces predominantly display a high spectral contrast while the sawed and split surfaces display up to 25% lower reflectance values. Furthermore, the sawed and split surfaces display spectral signature shape differences at specific wavelengths, which we link to mineral transmission features, surface orientation effects and multiple reflections in fine-grained minerals. Hence, the influence of rock surface preparation should be taken in consideration to avoid an inaccurate geological interpretation.

It is well-known that surface plasmon wave propagates along a straight line, but this common sense was broken by the artificial curved light – plasmon Airy beam. In this paper, we introduce a new class of curved surface plasmon wave - the photonic hook plasmon. It propagates along wavelength scaled curved trajectory with radius less than surface plasmon polariton wavelength, and can exist despite the strong energy dissipation at the metal surface.

Polymer-derived SiC-polycrystalline fiber (Tyranno SA) shows excellent heat-resistance up to 2000^oC, and relatively high strength. Up to now, through our research, the relationship between the strength and residual defects of the fiber, which were formed during the production processes (degradation and sintering), has been clarified. In this paper, we addressed the relationship between the production condition and the surface roughness of the obtained SiC-polycrystalline fiber, using three different raw fibers (Elementary ratio: Si₁Al_0.01C_1.5O_0.4~0.5) and three different types of reactor (Open system, Partially-open system, and Closed system). With increase in the oxygen content in the raw fiber, the degradation during the production process easily proceeded. In this case, the degradation reactions (SiO+2C=SiC+CO and SiO₂+3C=SiC+2CO) in the inside of each filament become faster, and then the CO partial pressure on the surface of each filament is considered to be increased. In consequence, according to Le Chatelier’s principle, the surface degradation reaction and grain growth of formed SiC crystals would be considered to become slower. That is to say, using the raw fiber with higher oxygen content and closed system (highest CO content in the reactor), much smoother surface of the SiC-polycrystalline fiber could be achieved.

The COVID-19 pandemic has significantly altered how people work, with an increasing number transitioning to working-from-home (WFH). This paradigm shift has raised various challenges in adapting living spaces to meet the needs of remote work. Dedicated workspaces or home offices need to be customised for creativity and productivity. Thus, this systematic literature review explores the potential challenges and limitations of implementing modern office design features in residential environments. The study synthesises findings from 108 peer-reviewed articles published within the last decade, focusing on ergonomics, productivity, work-life balance, and spatial constraints. The study found several challenges in translating office design features to home settings. Firstly, spatial limitations in residential areas often restrict the implementation of open-plan layouts and collaborative zones, which are hallmarks of modern office designs. Secondly, the integration of ergonomic furniture and adjustable workstations are limited by budget constraints and the dual-purpose nature of many home spaces. Furthermore, the review highlights the psychological challenges of maintaining work-life boundaries when professional and personal spaces overlap. Noise pollution and distractions emerge as significant factors impacting productivity in home offices, which contrasts controlled modern office environments. The review suggests that the complete replication of modern office design in homes may be impractical, a hybrid approach that adapts key features to residential constraints could enhance home office productivity. Potential solutions could include modular furniture designs, the simulation of collaborative spaces, and the development of noise-cancelling technologies specifically for home environments. This study contributes to the growing body of knowledge on remote work environments and provides valuable insights for enhancing work-life balance, environmental sustainability, and economic growth.

High-power output and high conversion efficiency are crucial in the study of microfluidic microbial fuel cells (MFCs). In our previous work, we attempted various methods to increase the power density of the MFCs, but nutrient consumption was limited to the bottom (electrode) layer of the microfluidic channel due to the diffusion limitations. In this work, long-term experiments were conducted on a new 4-electrode microfluidic MFC design, which grew Geobacter sulfurreducens biofilms on upward- and downward-facing electrodes in the microchannel. It was discovered that inoculation and growth of the electroactive biofilm did not proceed as fast as the downward facing anode, which we hypothesize is due to gravity effects that negatively impacted bacterial settling on that surface. Rotating the device during the growth phase resulted in uniform and strong outputs from both sides, yielding individual power densities of 4.03 and 4.13 W m-2, which was increased to nearly double when the top- and bottom-side electrodes were operated in parallel as a single 4-electrode MFC. Similarly, acetate consumption could be doubled with the 4-electrodes operated in parallel.

The article presents investigations of rail vehicle bogie of Y25 type. The Y25 bogie family is one of the most commonly used freight car bogie designs. In addition to several significant advantages characterising this design, it also has several disadvantages observed since the beginning of more than fifty years of operation in several types of cargo vehicles. One of these defects observed in real systems is "unsatisfactory running stability", particularly at long straight tracks. The article used commercial engineering software VI-Rail to create a model of the gondola car (type 412W Eaos) with two Y25 bogies. The car model was tested empty and loaded (maximum permissible load). Motion along straight and curved tracks with different radii values was analysed. The vehicle velocity was changed from a few m/s to the maximum values for which stable solutions of the model existed. For each route, a non-linear critical velocity was determined, defining the maximum operating velocity of the modelled car. The model solutions were recorded, while just one was selected to present the results - the first wheelset lateral displacement ylw. The opinion about the "imperfect running quality" in curved tracks was confirmed. The possible appearance of self-exciting wheelset vibrations in the modelled car's operating velocity range in the laden state was also observed. The research results on the impact of the bogie suspension parameters change on the vehicle model stability are presented. The crucial parameter in the bogie suspension was indicated. Reducing its value by several percent about the nominal value increases the critical velocity of the car to values higher than the maximum operating velocity of the modelled vehicle.

Objective: Obstructive sleep apnea syndrome (OSAS) is a common sleep disorder that is caused by the reduction or cessation of airflow in the upper airway. Irisin, retinol-binding protein-4 (RBP-4), and adiponectin are the three significant factors in the metabolic process of the human body. The objective of this study was to investigate whether plasma irisin, RBP-4, and adiponectin levels are associated with the severity of OSAS. Methods: According to inclusion and exclusion criteria, 125 patients with OSAS and 46 healthy, gender matched controls were included to the study. The patients were classified according to the apnea hypopnea index (AHI) as 14 mild cases (5<AHI<15), 23 moderate OSAS cases (15<AHI<30) and 88 severe OSAS cases (AHI>30). The plasma irisin, RBP-4 and adiponectin levels were measured and compared between groups. Results: RBP-4 levels were higher in severe OSAS compared to moderate (p<0.05) and mild (p<0.001) OSAS groups, irisin levels were significantly lower compared to moderate (p<0.05) and mild (p<0.001) OSAS groups. There was a negative correlation between irisin and RBP-4 (r=-0.379; p<0.001) and AHI (r=-0.834; p<0.001) and a positive correlation with minimum oxygen saturation (MOS) (r=0.341; p<0.001) in the patient group. In the patient group, there was a negative correlation between adiponectin and BMI (r=-0.682; p<0.001), RBP-4 (r=-0.292; p<0.01) and AHI (r=-0.179; p<0.05) and a positive correlation with MOS (r=0.397; p<0.001). In the patient group, there was a positive correlation between RBP-4 and BMI (r=0.406; p<0.001) and AHI (r=0.473; p<0.001) and a negative correlation with MOS (r=-0.805; p<0.001). As a predictor of OSAS, adiponectin showed the highest specificity (84.8%) and RBP-4 the highest sensitivity (92.0%). Conclusion: The results of the present study demonstrated that the severity of OSAS causes more metabolic problems, including decreased plasma irisin and adiponectin levels and an increased plasma RBP-4 level. As a result, patients with an AHI score greater than thirty should be closely monitored for metabolic and cardiovascular abnormalities.

This paper presents an operational approach for detecting floods and establishing flood extent using Sentinel-1 radar imagery with Google Earth Engine. Flooded areas are identified using a change-detection method based on the normalized difference. The HAND algorithm is used to delineate zones for processing. The approach was tested and calibrated at small scale to identify optimal parameters for flood detection. It was then applied to the whole of the island of Madagascar after the cyclone Batsirai in 2022. The proposed method is enabled by the computing power and data availability of Google Earth Engine and Google Colab. The results show satisfactory accuracy in delineating flooded areas. The advantages of this approach are its rapidity, online availability and ability to detect floods over a wide area. The approach relying on Google tools thus offers an effective solution for generating a large-scale synoptic picture to inform hazard management decision-making. However, one of the method’s drawbacks is that it depends to a large extent on frequent radar imagery being available at the time of flood events and on free access to the platform. These drawbacks will need to be taken into account in an operational scenario.

An accumulating body of evidence suggests that physiological reactive oxygen species (ROS) generated by NADPH oxidases act as a redox signal to re-establish homeostasis, a capacity that progressively declines during aging, but is maintained in long-lived animals to promote healthy aging. In the model organism Caenorhabditis elegans, ROS generated by dual oxidases (Duox) are important for extracellular matrix integrity, pathogen defense, oxidative stress resistance, and longevity. The Duox enzymatic activity is tightly regulated and under cellular control. Developmental molting cycles, pathogen infections, toxins, mitochondrial-derived ROS, drugs, and small GTPases (RHO-1) can activate Duox (BLI-3) to generate ROS, whereas NADPH oxidase inhibitors and negative regulators, such as MEMO-1, can inhibit Duox to generate ROS. Three mechanisms-of-action have been discovered for the Duox/BLI-3-generated ROS: 1) enzymatic activity to catalyze cross-linking of free tyrosine ethyl ester in collagen bundles to stabilize extracellular matrices, 2) high ROS bursts/levels to kill pathogens, and 3) Redox signaling activating downstream kinase cascades to transcription factors orchestrating oxidative stress- and immunity responses to re-establish homeostasis. Although Duox function at the cell surface is well established, recent genetic and biochemical data also suggests a novel role for Duoxs at the endoplasmic reticulum membrane to control redox signaling. Evidence underlying these mechanisms initiated by ROS from NADPH oxidases and their relevance for human aging are discussed in this review. Appropriately controlling NADPH oxidase activity for local and physiological redox signaling to maintain cellular homeostasis might be a therapeutic strategy to promote healthy aging.

The integration of sign language recognition systems into digital platforms has the potential to bridge communication gaps between the deaf community and the broader population. This paper introduces an advanced Israeli Sign Language (ISL) recognition system designed to interpret dynamic motion gestures, addressing a critical need for more sophisticated and fluid communication tools. Unlike conventional systems that focus solely on static signs, our approach incorporates both Deep Learning and Computer Vision techniques to analyze and translate dynamic gestures captured in real-time video. We provide a comprehensive account of our preprocessing pipeline, detailing every stage from video collection to the extraction of landmarks using MediaPipe, including the mathematical equations used for preprocessing these landmarks and the final recognition process. The dataset utilized for training our model is unique in its comprehensiveness and is publicly accessible, enhancing the reproducibility and expansion of future research. The deployment of our model on a publicly accessible website allows users to engage with ISL interactively, facilitating both learning and practice. We discuss the development process, the challenges overcome, and the anticipated societal impact of our system in promoting greater inclusivity and understanding.

This article explores the use of vegetation indices (VIs) in remote sensing for estimating standing wood volume and volume increments in forest ecosystems. The study investigates the correlations between various VIs and wood volume across different forest stand age classes, focusing on the effectiveness of commonly used indices such as Squared Ratio Simple Red Edge (SQSR) and Red-Edge Ratio Vegetation Index (RERVI), as well as other typical indicators including Enhanced Vegetation Index (EVI), Red-Edge EVI (RE-EVI), and Green Normalized Difference Vegetation Index (GNDVI). Additionally, the analysis considers a pair of indicators based on blue and near-infrared channels, resembling the Blue-normalized Difference Vegetation Index (BNDVI). The research reveals that quadratic and power-law models of SQSR and RERVI demonstrate higher correlations (>0.40) with wood volume, especially in younger forest stands (>0.80). Furthermore, the study highlights the potential of NDII and NDWI indices for estimating volume increments in certain classes of forest stands (0.70). However, correlations vary across different forest stand classes, suggesting the need for further investigation into the reliability of VIs for monitoring wood volume and volume increments in forest ecosystems. Overall, this research contributes to the understanding of the applicability of VIs in remote sensing for forest management and ecosystem monitoring.

Small RNAs (sRNA) are epigenetic regulators of essential biological processes that have been linked to the onset and progression of leukemia, including acute adult T-cell leukemia-lymphoma (ATLL) caused by the retrovirus Human T-lymphotropic virus type 1. Here, we describe the sRNA profile of a 30-year-old female with ATLL at diagnosis and after maintenance therapy, with the goal of correlating their expression levels with response to therapy.

Various environmental challenges, related to oil palm commodity has became a major environmental challenge to oil palm production. The aim and objective of this study is to analyze the actual water footprint of oil palm based on root water uptake under varying crop age and soil type. The research was conducted in Pundu Village, Central Kalimantan. The methodology adopted in carrying out this study consists of various stages which includes observing soil moisture, rainfall, and water table, ETo, root water uptake and oil palm water footprint. The highest rate of water consumption was the 13 years oil palm on spodosol soil type with an average daily rate of 3.73 mm/day. The lowest evapotranspiration was represented by the 7th year oil palm on spodosol with an average rate of 3.07 mm/day. The total water footprint value obtained was between 0.56 – 1.14 m3/kg for a variety of plants with various age and soil types. It can be deduced that the water footprint value of oil palm vary for different crop age and soil types on temporal scale. The study also presented that the source of green water from the first root zone of oil palm deliver the highest contribution for oil palm root water uptake.

This study investigates Autism Spectrum Disorders (ASD) in Greece, focusing on estimating prevalence and identifying regional disparities in children aged 4 to 7 years. Utilizing a quantitative, descriptive, and exploratory methodology, the research employed a structured questionnaire to gather extensive maternal and child health data. The sample consisted of 517 mothers of children diagnosed with ASD from all over Greece contributing to a nuanced understanding of ASD predictors. The study aims to elucidate the role of prenatal factors in the likelihood of an ASD diagnosis and their impact on the subsequent functionality of children with ASD. The study identified significant predictors of lower functionality in children with ASD, including higher maternal age, delayed ASD diagnosis, lower family income, and higher birth order. Prenatal health issues, such as vaginal bleeding and infections, also influenced functional outcomes. Notably, a family history of neurological or psychiatric conditions appeared protective. The regression model demonstrated robust predictive power, underscoring the complexity of genetic, environmental, and socioeconomic factors in ASD development. The findings advocate for early diagnosis and intervention, systematic screening, and addressing socioeconomic disparities to improve functional outcomes. The results support evidence-based service development and policy adjustments to enhance early identification, intervention, and rehabilitation for children with ASD. Establishing standardized case-recording procedures and an ASD register at national and regional levels is recommended for systematic monitoring and resource evaluation.

Fungal spores are universal atmospheric components associated to allergic reactions. Alternaria (Ascomycota) is considered the most allergenic spore taxa. Alt a 1 is the major allergen of Alternaria and is present also in other Pleosporales. In this study, standard Hirst-based sampling and analyzing methods for measuring spore daily concentrations of Alternaria, Curvularia, Drechslera-Helminthosporium, Epicoccum, Leptosphaeria, Pithomyces, Pleospora and Stemphyllium (all included in the taxon Pleosporales) have been used besides two high-volume samplers, Burkard Cyclone (2017) and MCV CAV-A/mb (2019-2020), and ELISA Kits for measuring the allergen. The detection and quantification of Alt a 1 was only possible in the samples from the MCV sampler. Although Alt a 1 was better correlated with Alternaria spores than with Pleosporales spores, the three of them showed high correlations. It is shown, for the first time, a high and significant correlation of Alt a 1 with temperature, a negative one with relative humidity and no correlation with precipitation. The aerobiological monitoring of these three elements ensures the best information for understanding the affectation to allergy sufferers but, if not possible, as a minimum public health service aiming at the detection, treatment and prevention of allergy, the study of the airborne Alternaria spores should be ensured.

Clearly policy makers should consider the impacts of any decisions they might make before making them. Science can provide estimates of various economic, ecologic, environmental, and even social impacts of alternative policies, impacts that determine how effective any particular policy will be. These impact estimates can be used to compare and evaluate alternative policies in the search for identifying the best one to implement. Among all scientists providing inputs to policy making processes are analysts who develop and apply models that provide these estimated impacts and, possibly, their probabilities of occurrence. But just producing them is not a guarantee that they will be considered by policy makers. This paper discusses ways scientists, including systems analysts, can effectively contribute to and inform those involved in making water management decisions. Brief descriptions of a variety of past and on-going water management policy making processes illustrate both some successes and failures of science informing policy.

Unmanned Aerial Vehicles (UAVs) are now filling in the gaps between spaceborne and ground-based observations and enhancing the spatial resolution and temporal coverage of data acquisition. In the realm of hydrological observations, UAVs have a key role to quantitatively characterize the surface flow allowing for remotely accessing the water body of interest. In this paper we propose a technology which uses a sensing platform encompassing a drone and a camera to determine the water level. The images acquired my means of the sensing platform are then analyzed using the Canny method to detect the edges of water level and of Ground Control Points (GCPs) used as reference points. The water level is then retrieved from images and compared to a benchmark value obtained by a traditional device. The method is tested at four locations in an artificial lake in central Italy. Results are encouraging as the overall mean error between estimated and true water level values is around 0.02 m. This technology is well suited to improve hydraulic modeling and thus provide a reliable support to flood mitigation strategies also in uneasy-to-access environments.

Monitoring and protecting flowing watercourses is a complex and challenging task that requires the collaboration and coordination of various stakeholders such as governments, industries, farmers, consumers and environmental groups. The study of the dynamics of the concentration of polluting factors and especially the concentrations of heavy metals and highlighting a seasonal variation is a necessary element from this point of view. In this article, we present the results of our analyzes carried out in two measurement campaigns executed in 10 monitoring points along the Danube River, between Braila city and Isaccea city in the pre-deltaic area, during the summer season and autumn season 2022. The importance of this area is given by the fact that the Dan-ube Delta is part of the UNESCO heritage and the monitoring of polluting factors is a necessity in the desire to protect this area. The data measured during the July and August 2022 campaign co-vers a wide range of chemical species: Phosphate, CCO, CBO5, NH4+, N-NO2, N-NO3-, N-Total, P-PO4 3-, SO42-, Cl-, phenols, as well as metals with a harmful effect: Aluminum, Arsenic, Cad-mium, Chromium, Iron. The study includes an evaluation based on the statistical approach of the results to highlight the significant correlations and differences identified between the two data sets. Next, to highlight the obtained results, a numerical model was considered using HEC-RAS and ESRI ArcGis applications in a two-dimensional unsteady flow model in order to get the non-homogenous concentrations’distributions in the studied area. These two-dimensional models have been less studied in the specialized literature. In this way, interesting results could be ob-tained and prediction methods regarding the dynamics of metal concentrations could be struc-tured. The data obtained was used for the terrain model from the USGS service and the flows of the Danube and its two tributaries were simulated using the data provided by the national ser-vices. In this work, we present the results obtained for the dynamics of the concentrations of the metals Aluminum, Arsenic, Cadmium, Chromium and Iron and the evaluation of the specific ab-sorption coefficients for the explanation and correlation with the results of the measurements. The study is part of a more complex project in which the spatio-temporal distribution of the polluting factors in the water was evaluated and the habitats in the study area were inventoried - especially those of community interest. the aspects related to the influence of the distribution of polluting factors on the state of health will be the subject of another article.

Atypical Polypoid Adenomyoma (APA) is a benign uterine lesion that occurs in women of reproductive age. The histological pattern is characterized by irregular epithelial proliferation and muscular stroma. Our work consists of a systematic review of the literature, including the description and analysis of a case study, and assesses the main immunohistochemical and molecular markers that contribute to making a differential diagnosis against endometrial adenocarcinoma. This allows offering patients conservative treatment compared to the radical management required for endometrial cancer, due to the significant physical and psychological consequences that one procedure or another can have on women's health. The goal of this research is to carry out an adequate diagnosis of APA by providing the necessary information to guide clinical management, establish patient prognosis, and minimize the emotional impact associated with the disease, all in combination with clinical and histopathological findings and complementary imaging tests. In conclusion, an appropriate immunohistochemical and molecular approach, along with the presumptive histological diagnosis, determine the correct classification of the lesion as APA and not as other malignant pathologies, which allows establishing a treatment protocol adjusted to the biological reality of this pathology.

Viral infections leading to inflammation have been implicated in several common diseases such as Alzheimer’s disease (AD) and type 1 diabetes (T1D). Of note, herpes simplex virus 1 (HSV-1) has been reported to be associated with AD. We sought to identify the transcriptomic changes due to HSV-1 infection and anti-viral drug (acyclovir, ACV) treatment of HSV-1 infection in dissoci-ated cells from human cerebral organoids (dcOrgs) versus stem cell-derived pancreatic islets (sc-islets) to gain potential biological insights into the relevance of HSV-1-induced inflammation in AD and T1D. We observed that differentially expressed genes (DEGs) in HSV-1-infected sc-islets were enriched for genes associated with several autoimmune diseases, most significantly T1D but also rheumatoid arthritis, psoriasis, Crohn’s disease, and multiple sclerosis, whereas DEGs in HSV-1-infected dcOrgs were exclusively enriched for genes associated with AD. ACV treatment of sc-islets did not rescue transcript expression of autoimmune disease-associated genes. Finally, we identified gene ontology categories that were enriched for DEGs that were in common across, or unique to, viral treatment of dcOrgs and sc-islets, such as categories involved in the transferase complex, mitochondrial and autophagy function. Collectively, this studies pro-vide insight to the molecular effects of inflammation in AD and T1D.

Traumatic brain injury (TBI) is an important global clinical issue, requiring not only prevention but also effective treatment. Following TBI, diverse parallel and intertwined pathological mechanisms affecting biochemical, neurochemical, and inflammatory pathways can have severe impact on the patient’s quality of life. The current review summarizes evidence for utility of amantadine in TBI in connection to its mechanism of action. Amantadine combining multiple mechanisms of action may offer both neuroprotective and neuroactivating effects in TBI patients. Indeed, use of amantadine in TBI has been encouraged by several clinical practice guidelines/recommendations. Amantadine is also available as infusion which may be of particular benefit in unconscious patients with TBI, due to immediate delivery to the central nervous system and the possibility of precise dosing. In other situations, orally administered amantadine may be used. There are several questions that remain to be addressed: Can amantadine be effective in disorders of consciousness requiring long-term treatment and in combination with drugs approved for treatment of TBI? Do the observed beneficial effects of amantadine extend to disorders of consciousness due to factors other than TBI? Well controlled clinical studies are warranted to ultimately confirm its utility in the TBI and provide answers these questions.

Current agriculture intensifies crop cultivation to meet food demand, leading to unsustainable use of chemical fertilizers. This study investigates a few physiological and agronomic responses of common wheat following the inoculation with plant growth-promoting bacteria to reduce nitrogen inputs. A field trial was conducted in 2022-23, in Legnago (Verona, Italy) on Triticum aestivum var. LG-Auriga comparing full (180 kg ha-1) and reduced (130 kg ha-1) N doses, both with and without foliar application at end tillering of the N-fixing bacterium Methylobacterium symbioticum. Biofertilization did not improve shoot growth, while it seldom increased root length density in the arable layer. It delayed leaf senescence, prolonged photosynthetic activity, amplified stomatal conductance and PSII efficiency under reduced N dose. Appreciable ACC-deaminase activity of such bacterium disclosed augmented nitrogen retrieval and reduced ethylene production, explaining ameliorated stay-green. Yield and testing weight were unaffected by biofertilization, while both glutenin-to-gliadin and HMW-to-LMW ratios increased together with dough tenacity. It is concluded that Methylobacterium symbioticum can amplify nitrogen metabolism at reduced nitrogen dose, offering a viable approach to reduce chemical fertilization under suboptimal growing conditions for achieving a more sustainable agriculture. Further research over multiple growing seasons and soil types is necessary to corroborate these preliminary observations.

Categorical data analysis of 2 x 2 contingency tables is extremely common, not least because they provide odds and risk ratio statistics in medical research. The χ2 test is most often used, although some researchers use the likelihood ratio test (LRT). Does it matter which test is used? This paper argues that the LRT rather than the χ2 test should be used when we are interested in testing whether two variables are independent, as is typically the case. In contrast, the χ2 test should be reserved for where the data appear to match too closely a particular hypothesis (e.g. the null hypothesis), as may occur in the investigation of data integrity. Finally, it is argued that the evidential approach provides a consistent and coherent way in which tests can be made for each of these situations.

Tumor cells display abnormal growth and division, avoiding the natural process of cell death. These cells can be benign (non-cancerous growth) or malignant (cancerous growth). Over the past few decades, numerous in vitro or in vivo tumor models have been employed to understand the molecular mechanisms associated with tumorigenesis in diverse aspects. However, our comprehension of how non-tumor cells transform into tumor cells at molecular and cellular levels remains incomplete. The nematode C. elegans has emerged as an excellent model organism for exploring various phenomena, including tumorigenesis. Although C. elegans does not naturally develop cancer, it serves as a valuable platform for identifying oncogenes and the underlying mechanisms within a live organism. In this review, we describe three distinct germline tumor models in C. elegans, highlighting their associated mechanisms and related regulators. Given the conservation of many of the regulators implicated in C. elegans tumorigenesis, it is proposed that these unique models hold significant potential for enhancing our comprehension of the broader control mechanisms governing tumorigenesis.

The incidence of Type 1 Diabetes (T1D) in the Arab world, particularly, oil and gas rich Gulf Cooperative Council (GCC) countries has more than doubled in the last twenty years. Therefore, there is a dire need for careful systematic familial cohort studies, especially in high-risk populations. Several immunogenetic factors affect the pathogenesis of the disease. Genes in the human leukocyte antigen (HLA) account for the major genetic susceptibility to the disease. The triggering agents initiate disease onset by destruction of pancreatic β-cells. The autoantibodies against glutamic acid decarboxylase (GADA), insulinoma antigen-2 (IA-2A), insulin (IAA), and zinc transporter-8 (ZnT-8A) comprise the most reliable biomarkers for T1D in both children and adults. Although three of the GCC countries, namely Kuwait, Saudi Arabia and Qatar are among the top 10 countries with high incidence rate of T1D, no proper diagnostic and prediction tools were applied in the region. Understanding the disease sequelae in a homogenous gene pool with high consanguinity in the GCC could help solve the challenges in understanding pathogenesis, as well as hasten the prevention of T1D. Arab states must incorporate T1D predictive and intervention policies on a war-footing basis to minimize the burden of this serious disease.

Water sustainability has become one of the most severe issues in the 21st Century due to dramatic urban population growth and climate change. This paper reviews some of the critical key water issues that need to be considered/incorporated in the quest for water sustainability for the upcoming decades. The purpose is to recognize the critical circumstances for maintaining water sustainability and recognize that many regions in the world have passed the ‘tipping point’ of balancing their water sustainability and failing to realize that restoring sustainability will be extremely difficult. From the water quantity perspective, several examples are used to demonstrate situations which, in hindsight, have been initially shown to be effective but highly problematic in the long term. The review considers, amongst others, the 1960s India example shows that an agricultural ‘success’ starting in the 1960s has subsequently become an environmental disaster. Additional issues, including the impacts of dietary adjustments, upstream diversions raising downstream shortfalls, and transfers of water from agriculture to urban areas, are examples that demonstrate that to achieve water sustainability, lessons must be learned from the past, and adaptive measures must be adopted to help humanity avoid adverse and irreversible environmental tragedies. Government authorities can learn from this critical review of some approaches and realize their responsibility to proactively promote better water resource management strategies (domestic and international collaborations) and strictly regulate water use practices to better manage water sustainability.

While providing safe water for the rural poor is considered a basic human right, there are numerous issues associated with existing technologies with shortcomings. Performance issues have continued to fail to meet the needs of impoverished families due to issues including high cost, difficulties with performance, and continuing needs for maintenance. These issues have severely interfered the safe water accessibility. Key aspects of the Guelph Water Filter (GWF) system can avoid/minimize many of these issues. The GWF as described herein enables delivery of low cost, long-term performance at 3Log removal of E.coli and can deliver 1 to 3 L of treated water per hour. The GWF is simple to operate, has an ability to provide sufficient water for a family, maintains longevity of performance, is easy to maintain and has protection against breakage during the cleaning process, is repairable at village level, and operates using a sizable reservoir of water to supply raw water, meaning the technology does not need to be refilled frequently. Hence, the capability of the novel GWF technology is shown to bypass many of the troublesome features of alternative low-tech water treatment technologies. The potential for the GWF to function for 2 days continuously avoids the need for young girls to fetch raw water frequently during a day, thereby enabling them to attend school. Hence, the GWF enhances the potential to result in ‘safe water and full schools’, providing the opportunity for girls to receive education and capture socio-economic benefits for the community.

Climate change is rapidly exacerbating and adding to major-to-existential issues associated with fresh water availability and utilization. The massive thus far untapped saline/salt water - oceans/wastelands/deserts – Halophytes resources nexus can, at scale and profitably provide major climate change mitigation and greatly alleviate most extant fresh water issues. Approaches include ocean fertilization and saline/seawater agriculture on deserts and wastelands to sequester massive amounts of CO2 and methane and for food, freeing up the some 70% of the fresh water now utilized by current agriculture for direct human use. Also enables production of huge amounts of Bio/SAF fuels and bio mass based chemical feed stock employing the massive capacity of cheap saline/ seawater and cheap deserts, wastelands. Overall saline/ seawater can, uniquely, at the scale of the climate and fresh water issues, without desalinization, profitably, utilizing extant technologies and the some 44% of the land that is deserts/ wastelands, and the 97% of the water that is saline/ seawater rapidly, seriously, address land, fresh water, food, energy and climate.

In this article, we present the use of the coupled land surface model and groundwater flow model SWAT-MODFLOW with the decision support tool WEAP (Water Evaluation and Planning software) to predict future surface water abstraction scenarios in a complex river basin, under conditions of climate change. The modeling framework is applied to the Dee River catchment in Wales, United Kingdom. Regarding hydrology, the coupled model improves overall water balance and low streamflow conditions, compared to a stand-alone SWAT model. The calibrated SWAT-MODFLOW is employed with high resolution climate model data from the UKCP18 project with future scenario of RCP85 from 2020 to 2040. Then, water supply results from SWAT-MODFLOW are fed into WEAP as input for the river reach in the downstream region of the river basin. This system is utilized to create various future scenarios of surface water abstraction of public water supply in the downstream region: maximum licensed withdraw, 50 % authorized abstractions, monthly time series with 1% increase of water use, and maximum water withdraw year based on historical records repeated every year with 1% increase of water use, to estimate the unmet demands and streamflow requirement. This modeling approach can be used in other river basins to manage scenarios of supply and demand.

Climate change has become the greatest threat to the survival of world and its ecosystem. With the irreversible impact on the ecosystem, problems like rise in sea level, food-insecurity, natural resources scarcity, seasonal disorders have increased over the past few years. Among these problems, the issue of water scarcity due to the lack of water resources and global warming has plagued several nations. Owing to the rising concerns over water scarcity United Nations (UN) has acknowledged water as a primary resource to the development of societies under the ‘Water Goal’ of the sustainable development goals. As the changing climate and intermittent availability of water resources pose major challenges to forecast demand, especially in countries like the United Arab Emirates (UAE) which has one of the highest per capita residential water consumption rates in the world. Therefore, the aim of this study is to propose an accurate water demand forecasting technique that incorporates all significant factors to predict the future water demands of the UAE. The forecasting model used is the Long Short Term Memory (LSTM), with the factors considered are mean temperature, mean rainfall, relative humidity, Gross Domestic Product (GDP), Consumer Price Index (CPI) and population growth. The LSTM model predicts the water demand forecasting in the UAE showing that the future demand will decrease from 1821 million m3 in 2018 to 1809.9 million m3 in 2027.

The aim of the study is to develop a population pharmacokinetic (PopPK) model and to investigate the influence of CYP3A5/CYP3A4 and ABCB1 single nucleotide polymorphisms (SNPs) on the Tacrolimus PK parameters after LCP-Tac formulation in stable adult renal transplant patients. The model was developed using NONMEM v7.5, from full PK profiles from a clinical study (n=30) and trough concentrations (C0) from patient follow-up (n=68). The PK profile of the LCP-Tac formulation was best described by a two-compartment model with linear elimination, parameterised in elimination (CL/F) and distributional (CLD/F) clearances and central compartment (Vc/F) and peripheral compartment (Vp/F) distribution volumes. A time lagged first order absorption process was characterized using transit compartment models. According to the structural part of the base model, the LCP-Tac showed an absorption profile characterized by 2 transit compartments and a mean transit time of 3.02 hours. Inter-individual variability was associated with CL/F, Vc/F and Vp/F. Adding inter-occasion variability (IOV) on CL/F caused a statistically significant reduction in the model minimum objective function MOFV (p<0.001). Genetic polymorphism of CYP3A5 and cluster of CYP3A4/A5 SNPs statistically significantly influenced Tac CL/F. In conclusion a PopPK model was successfully developed for LCP-Tac formulation in stable renal transplant patients. CYP3A4/A5 SNPs as a combined cluster including three different phenotypes (high, intermediate, and poor metabolizers) was the most powerful covariate to describe part of inter-individual variability associated with apparent elimination clearance. Incorporating this covariate in the initial dose calculation and during the therapeutic drug monitoring (TDM) would probably optimize Tac exposure attainments.

Neuroblastoma is the most common tumour in children under 1 year old, accounting for approximately 50% of infant cancer cases. Although current treatments are relatively efficacious against this cancer, associated adverse effects could be detrimental to growth and development. In contrast, glioblastoma accounts for 52% of brain tumours and has an extremely poor prognosis. Current chemotherapeutics include temozolomide, which has numerous negative side-effects and a low-effective rate. Previous studies have shown the manipulation of autophagy to be a promising method for targeting cancers, including glioblastoma. We sought to determine the effects of autophagic alterations in combination with current chemotherapies in both neuroblastoma and glioblastoma. Supplementing cisplatin or temozolomide with autophagy activator rapamycin stabilized cancer cell mitochondria, despite having little effect on apoptosis or oxidative stress. Autophagy inhibition via 3-methyladenine or hydroxychloroquine alongside standard chemotherapies enhanced apoptosis and oxidative stress, with 3-methyladenine also disrupting mitochondrial health. Importantly, combining hydroxychloroquine with 0.5 µM cisplatin or 50 µg/mL temozolomide was as or more effective than 2 µM cisplatin or 100 µg/mL temozolomide alone. Analyzing these interesting results, a combined treatment of autophagy inhibitor with a standard chemotherapeutic agent could help to improve patient prognosis and reduce chemotherapy doses and their associated side-effects.

The co-occurrence of depression and obesity has become a significant public health concern worldwide. Recent studies have shown that metabolic dysfunction, which is commonly observed in obese individuals and characterized by inflammation, insulin resistance, leptin resistance, and hypertension, is a critical risk factor for depression. This dysfunction may induce structural and functional changes in the brain, ultimately contributing to depression's development. Given that obesity and depression mutually increase each other's risk of development by 50-60%, there is a need for effective interventions that address both conditions. The comorbidity of depression with obesity and metabolic dysregulation is thought to be related to chronic low-grade inflammation, characterized by increased circulating levels of pro-inflammatory cytokines, and C-reactive protein (CRP). As pharmacotherapy fails in at least 30-40% of cases to adequately treat major depressive disorder, a nutritional approach is emerging as a promising alternative. Omega-3 polyunsaturated fatty acids (n-3 PUFAs) are a promising dietary intervention that can reduce inflammatory biomarkers, particularly in patients with high levels of inflammation, including pregnant women with gestational diabetes, patients with type 2 diabetes mellitus, and overweight individuals with major depressive disorder. Further effort directed to implement these strategies in clinical practice could contribute to improved outcomes in patients with depression and comorbid obesity and/or metabolic dysregulation.

A new treatment option for cluster headache (CH) prevention is needed. Monoclonal antibodies (mABs) against calcitonin gene-related peptide (CGRP) ligands are used as a preventative treatment for migraine. Considering the CGRP’s role in the CH attack’s ignition and upkeep, fremanezumab and galcanezumab have been evaluated for CH preventative treatment. However, only high-dose (300 mg) galcanezumab was proven for episodic CH prevention. We herein report 3 cases of migraine and comorbid CH with previous failures of preventive treatments. The 2 cases were treated with fremanezumab and the one with non-high-dose galcanezumab. All 3 cases showed good results not only on migraine but also on CH attacks. Our report suggested the efficacy of CGRP-mABs for CH prevention. Our cases differed from the cases in the phase 3 trials of CGRP-mABs for CH prevention in the following 2 points. First, the patients had both migraine and comorbid CH. Second, the combined use of CGRP-mABs with preventative drugs for CH, such as verapamil and/or prednisolone, was performed. Future accumulation of real-world data may prove the efficacy of CGRP-mABs for CH prevention.

Background: Brain oxidative lipid damage and inflammation are common in neurodegenerative diseases such as Alzheimer’s disease (AD). Paraoxonase-1 and 3 (PON1 and PON3) protein expression have been described in tissues with no PON1 and PON3 gene expression. In the present study, we aimed to examine differences in PON1 and PON3 protein expression in the brain of a mouse model of AD. Methods: We used peroxidase-based and fluorescence-based immunohistochemistry in 5 brain regions (olfactory bulb, forebrain, posterior midbrain, hindbrain and cerebellum) of transgenic (Tg2576) mice with the Swedish mutation (KM670/671NL) responsible for a familial form of AD and corresponding wild-type mice. Results: We found intense PON1 and PON3 positive staining in star-shaped cells surrounding Aβ plaques in all Tg2576 mouse brain regions studied. Although we could not co-localize PON1 and PON3 with astrocytes, brain star-shaped cells, we found some co-localization of PON3 with microglia. Conclusions: These results suggest that 1) PON1 and PON3 cross the blood-brain barrier in discoidal HDLs and are transferred to specific brain cell types, and 2) PON1 and PON3 play an important role in preventing oxidative stress and lipid peroxidation in particular cell types, likely astrocytes and microglia, in AD pathology, and potentially in other neurodegenerative diseases

Atlantic salmon (Salmo Salar) is one of the fish species that rich in omega-3 fatty acids. Consumption of omega-3 fatty acids can lower down the risk of cardiovascular disease and coronary heart disease. The extraction of omega-3 fish oil from Atlantic salmon by using hexane and isopropanol was conducted in this research. Response Surface Methodology (RSM) was used to study the impact of parameters which were temperature (50-90°C), centrifuge speed (1000-3000rpm) and solvent ratio of hexane to isopropanol (0.5-1.5) to the percentage of oil yield. The results obtained shows that 15.23%± 0.61 of oil yield from Atlantic salmon under an optimum condition of 70°C, 3000 rpm and solvent ratio of hexane to isopropanol of 1.5. The acid value, peroxide value and p-anisidine value of the fish oil obtained were 7.48 mg KOH/g, 1.94 meq/kg and 5.56 respectively which were all within the acceptable limit which stipulated by Global Organization for EPA and DHA (GOED) and Food and Agricultural Organization of the United Nations (FAO). The FTIR analysis proved the presence of alkane and carboxylic acid in the fish oil. Furthermore, GC-MS analysis showed that the fish oil contains higher monounsaturated fatty acids (MUFA) contents followed by polyunsaturated fatty acids (PUFA) and 4.5525% of total omega-3 fatty acids.

Interaction of an electromagnetic field with matter in a laser cavity without the assumption of a fixed direction of the transverse electric field, described by the two-level Maxwell-Bloch equations, is studied. By using a perturbative nonlinear analysis, performed near the laser threshold, we report on the derivation of the laser (3+1)D vectorial complex cubic-quintic complex Ginzburg-Landau equation. Furthermore, we study the modulational instability of the plane waves both theoretically using the linear stability analysis, and numerically, using direct simulations via the split-step Fourier method. The linear theory predicts instability for any amplitude of the primary waves. Our numerical simulations confirm the theoretical predictions of the linear theory as well as the threshold of the amplitude of perturbations. The system understudy shows a deep dependence on the laser cavity parameters, for which there appear wave patterns in accordance with the predictions from the gain spectrum.

Synthesis and characterization of anhydrous LiZn(IO₃)₃ powders prepared from an aqueous solution are reported. Morphological and compositional analyses were carried out by scanning electron microscopy and energy dispersive X-ray measurements. The synthesized powders exhibit a needle-like morphology after annealing at 400°C. A crystal structure for the synthesized compound has been proposed from powder X-ray diffraction and density-functional theory calculations. Rietveld refinements led to a monoclinic structure, which can be described with space group P21, number 4, and unit-cell parameters a = 21.874(9) Å, b = 5.171(2) Å, c = 5.433(2) Å, and beta = 120.93(4)º. Density-functional theory calculations supported the same crystal structure. Infrared spectra were also collected and the vibrations associated to the different modes discussed. The non-centrosymmetric space group determined for this new polymorph of LiZn(IO₃)₃, the characteristics of its infrared absorption spectrum, and the observed second harmonic generation suggest a promising infrared non-linear optical material.

Rotavirus species H (RVH) has been detected in pigs, humans and bats. Moreover, porcine RVHs have been recently identified in several swine-producing countries. Despite their zoonotic impact, genome information of RVHs is still limited. This study aimed to establish a tentative complete genome-based genotyping system for RVHs, by appending genomic sequences from 12 porcine RVHs identified in Japan between 2013 and 2015 to those from human and other porcine RVHs reported in previous studies. Phylogenetic analysis of 11 RNA segments indicated that porcine RVHs could be classified into multiple genotypes. Consequently, the genotype classification for RVHs revealed the existence of genotypes 10G, 6P, 6I, 3R, 4C, 7M, 6A, 2N, 4T, 6E, 3H for the genes VP7, VP4, VP6, VP1, VP2, VP3, NSP1, NSP2, NSP3, NSP4 and NSP5, respectively. Surprisingly, two distinctive types in NSP1 and NSP3 genes were identified from among the twelve porcine RVHs. Our data suggest a potentially novel gene rearrangement event between porcine RVH and rotavirus species C in the NSP3 gene. These findings would provide a new insight in understanding for evolution of RV.

Leaf variegation pale yellowing is observed in the Calcineurin B-Like-Interacting Protein Kinase14 (CIPK14) overexpression line (oeCIPK14) and double knockout WHIRLY1/WHIRLY3 (why1/3) lines of Arabidopsis, the distribution of WHIRLY1 (WHY1) protein between plastids and the nucleus are affected by the phosphorylation of WHY1 by CIPK14. To elucidate the coregulation of CIPK14 and WHIRLY1/WHIRLY3 mediated leaf pale yellowing, a differential proteomic analysis is conducted between the oeCIPK14 variegated (oeCIPK14-var) line, why1/3 variegated (why1/3-var) line and wild type (WT). More than 800 protein spots are distinguished on each gel, 67 differential abundance proteins (DAPs) are identified by matrix-assisted laser desorption ionization-time of flight/time of flight mass spectrometry (MALDI-TOF/TOF-MS), of which, 34 DAPs are in the oeCIPK14-var, 33 DAPs are in the why1/3-var compared to WT. Five overlapping proteins differentially change both in the oeCIPK14-var and in the why1/3-var. They are ATP-dependent Clp protease proteolytic subunit-related protein 3 (ClpR3), Ribulose bisphosphate carboxylase large chain (RBL), Beta-amylase 3 (BAM3), Ribosome-recycling factor (RRF), Ribulose bisphosphate carboxylase small chain (RBS). Bioinformatics analysis show that most of DAPs are involved in photosynthesis, defense and antioxidation pathway, protein metabolism, amino acid metabolism, energy metabolism, malate biosynthesis, lipid metabolism and transcription. Thus, the photosystem parameters are measured that the content of chlorophyll, the photochemical efficiency of PSⅡ (Fv/Fm), and electron transport rates (ETR) decrease in the why1/3-var and oeCIPK14-var, but the non-photochemical quenching (NPQ) increases. Both mutants show high sensitivity to strong light. Based on the annotation of DAPs from both why1/3-var and oeCIPK14-var lines, we conclude that CIPK14 phosphorylation mediated WHY1 deficiency in plastids is related to impairment of protein metabolism leading to chloroplast dysfunction.

Objectives: This study aimed to compare the similarities and differences between the Kawasaki disease (KD) during the SARS-CoV-2 pandemic and multisystem inflammatory syndrome in children (MIS-C). Methods: The medical records of patients diagnosed with KD and MIS-C at a single center between July 2020 and November 2021 were retrospectively reviewed. Results: The study included 39 MIS-C patients (84.6% male) with a median age of 138 months and 17 KD patients (58.8% male) with a median age of 36 months. Compared with the KD patients, MIS-C patients were older (p<0.001), had longer hospital stays (p=0.023), elevated neutrophil count (p<0.001), C-reactive protein (p<0.001), procalcitonin (p<0.001), interleukin-6 (p<0.014), ferritin (p<0.001), fibrinogen (p<0.001), troponin I (p=0.001), NT-proBNP (p<0.001), and, D-dimer levels (p<0.001). They had more hypotension (p=0.024), decreased left ventricular function (p=0.023), and a greater need for corticosteroids (p<0.001), enoxaparin (p=0.045), and therapeutic plasma exchange (p<0.001). Patients with KD displayed a higher frequency of rash (p<0.001), oral mucosal changes (p<0.001), conjunctival injection (p<0.001), extremity changes (p<0.001), and cervical lymphadenopathy (p<0.001). They had a longer duration of fever (p<0.001), elevated white blood cell count (p<0.001), platelet count (p<0.001), and alanine aminotransferase level (p<0.001). The two groups were similar in terms of hemoglobin levels, erythrocyte sedimentation rate, albumin levels, or the frequency of coronary dilation/aneurysm, myocarditis, pericarditis, invasive mechanical ventilatory support, and intravenous immunoglobulin treatment. Conclusions: Older patient age, a greater presence of gastrointestinal and cardiac findings associated with hypotension, increased NT-proBNP levels, decreased left ventricular function, the use of various treatment modalities, and longer hospital stays suggest MIS-C, whereas a longer duration of fever and classical clinical features of KD favor KD.

Communication pathways are an underestimated source of synthetic particles in the environment. This study investigated the impact of traffic volume on microplastics (MPs) and tire wear particles (TWPs) pollution in road snow. An examination was conducted in a medium-sized city situated in northeastern Poland, known for being one of the cleanest regions in the country. MPs and TWPs were found at all 53 sites, regardless of the intensity of traffic. The average concentration for all samples was 354.72 pcs/L. Statistically significant differences were found between the average values of particles concentration on low, medium, and heavy traffic roads amounted 62.32 pcs/L, 335.97 pcs/L and 792.76 pcs/L respectively. Within all three studied groups of roads, MPs and TWPs with the smallest size, ranging from 50 to 200 μm, were prevalent. In all studied groups of roads, 4 analyzed shapes of particles were found, with irregular fragments being the most abundant form (89.23%). The most frequently recorded color among the collected samples was black (99.85%), and the least frequently recorded was blue, constituting only 0.01%. This study suggests that snow cover on the roads may act like temporary storage of pollutants during winter in the temperate climate zone and after thaw can significantly increase the concentration of MPs and TWPs in surface waters. Possible measures to decrease the release of MPs and TWPs into the environment in the city may include reducing traffic volume and speed, implementing street sweeping, utilizing filtration chambers, and installing stormwater bioretention systems or settling ponds.

In this paper, a method of charging lead acid battery with solar power by flyback converter is proposed. The basic system consists of a buffer circuit, auxiliary power circuit, control circuit, voltage feedback circuit and current feedback circuit. The system is capable of monitoring battery voltage and the current, charging the coupling inductor and automatic control of output duty cycle, overcharging and over-discharging protection. The experiment proves that the charging efficiency is improved by about 83% at full load.

Pituitary adenylate cyclase-activating polypeptide receptor 1 (PAC1-R) has a higher affinity for pituitary adenylate cyclase- activating polypeptide (PACAP) than for vasoactive intestinal peptide (VIP). PACAP exerts its neuroprotective effects through PAC1-R. PAC1-R has become a target for drug development, and we targeted PAC1-R to screen small positive allosteric modulator 1 (SPAM1). SPAM1 has a neuroprotective effects, and in the D-galactose (D-gal) mouse model, SPAM1 improved the structure of the hippocampal dentate gyrus and restored the number of neurons. Compared with D-gal model mice, SPAM1 treatment upregulated the expression of Sirtuin 6 (SIRT6) and Lamin B1, and downregulated the expression of YinYang 1 (YY1) and p16. Consistent with this, the same results were obtained in senescent RGC-5 cells. Meanwhile, SPAM1 was also found to up-regulate SIRT6 and down-regulate YY1 expression in normal RGC-5 cells. Then, we further explored the mechanism of SPAM1 neuroprotection by whole transcriptome sequencing and proteomic analysis, and found that SPAM is involved in the longevity regulating pathway, and confirmed the up-regulation of neurofilament light polypeptide and neurofilament medium polypeptide by western blot, thus laying a pharmacological foundation for SPAM1 as a therapeutic agent for neurodegenerative diseases. polypeptide and neurofilament medium polypeptide. Thus, it lays a pharmacological foundation for SPAM1 as a therapeutic drug for neurodegenerative diseases.

Spent coffee grounds (SCG) have great potential as a useful, value-added biological material. In this context, activated carbon (AC) was prepared from SCG by an activation process using H3PO4 at 600°C in air and used as an adsorbent for the azo dye AO7, a model molecule for dye colorants found in textile industry effluents. X-ray diffraction, SEM and BET revealed that the AC was predominantly amorphous, consisting of a powder of 20-100 µm particles with mesopores averaging 5.5 nm in pore size. Adsorption kinetics followed a pseudo-second-order law, while the Langmuir model best fitted experimental isotherm data (maximum capacity of 119.5 mg AO7 per AC g). Thermodynamic parameters revealed that adsorption was endothermic and spontaneous. All the characterizations indicated that adsorption occurred by physisorption via mainly - interactions. The best experimental removal efficiency optimized by means of a Box-Behnken design and response surface methodology was 98% for an initial AO7 concentration of 20 mg.L-1 at pH 7.5 with a dose of 0.285 g.L-1 of AC and a contact time of 40 min. These results clearly show that activated carbon prepared from SCG can be a useful material for efficiently removing organic matter from aqueous solutions.

Phasins are proteins, which are located on the surface of Polyhydroxybutyrate (P3HB) granules and that carry out activities that affect the polymer metabolism. This study aimed to evaluate the effect of inactivating phasins PhbP2 or PhbP3 on the growth rate, production and molecular mass of P3HB in cultures under low or high oxygen transfer rates (OTR). The results reveal that under high OTRₘₐₓ conditions (between 8.1 and 8.9 mmol L⁻¹ h⁻¹ depending on the strain evaluated), the absence of phasins PhbP2 and PhbP3 resulted in a strong negative effect on the growth rate. In contrast, the rates of specific oxygen consumption increased in the case of cultures with strains where phasins were absent. This behavior was not observed under conditions at a low oxygen transfer rate (3.9 ± 0.71 mol L⁻¹ h⁻¹); where both growth and oxygen consumption were the same for the different strains evaluated. It was observed, at high OTRₘₐₓ that the absence of phasin PhbP3 harms the P3HB synthesis, finding a decrease of 30 % in the polymer production at the end of cultivation; however, the molecular weight of the polymer remained constant during the course of cultivation. In summary, it can be concluded that both growth and polymer synthesis were affected when phasin PhbP3 was absent from the P3HB granule, especially at high OTRₘₐₓ.

Omega-3 polyunsaturated fatty acids (PUFAs) play a critical yet underappreciated role in muscle health, particularly eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). Through a review of current literature, we analyze the effects of these nutrients on muscle protein synthesis, mass, strength, and recovery. Studies demonstrate that omega-3 PUFAs enhance muscle protein synthesis via the mTOR pathway and possess anti-inflammatory properties that may reduce muscle damage and atrophy, particularly in older adults. Their potential to improve muscle function and mitigate exercise-induced damage is also reviewed, highlighting relevance for athletes and active individuals. Further research on optimal dosages and long-term effects of omega-3 supplementation is needed, providing a basis for future studies and practical recommendations for leveraging these nutrients to support muscle health.

This article presents the results of studies of the structure and conductive properties of Na3Fe2(PO4)3 polycrystals synthesized by solid-phase and melt (using concentrated optical radiation) methods. It has been established that with the melt method, the synthesis of the material occurs under significantly nonequilibrium temperature-gradient conditions, which leads to the creation of deformations in the sample that contribute to an increase in ionic conductivity. The ability of the Na3Fe2(PO4)3 structure to adapt to anomalous deformations that occur under temperature-gradient conditions indicates the elasticity of the crystalline framework {[Fe2(PO4)]3-}3∞. Through a comparative assessment of the structural parameters and conductive properties of these materials, it is shown that polycrystals obtained by the melt method have a better texture and greater ionic conductivity. The advantage of this method is that the duration of the synthesis of α-Na3Fe2(PO4)3 is halved. It is concluded that this method is applicable to obtain effective polycrystals of other compositions.

Epigallocatechin-3-gallate (EGCG) is the most abundant polyphenol in green tea. In this study, the effects of dietary EGCG on oxidative stress and the metabolism and toxicity of acetaminophen in liver were investigated. Rats were fed the diets with (0.54 %) or without EGCG supplementation for four weeks and were then intraperitoneally injected with acetaminophen (1g/kg). Results showed EGCG lowered hepatic oxidative stress and cytochrome P450 (CYP) 1A2, 2E1, and 3A, and UDP-glucurosyltransferase activities prior to acetaminophen injection. After acetaminophen challenge, the elevations in plasma alanine aminotransferase activity and histological changes in liver were ameliorated by EGCG treatment. EGCG reduced acetaminophen-induced apoptosis by increasing the Bax/Bcl2 ratio in liver. EGCG mildly increased autophagy by increasing the LC3B II/I ratio. Lower hepatic acetaminophen-glutathione and acetaminophen-protein adducts contents were observed after EGCG treatment. EGCG increased glutathione peroxidase and NAD(P)H quinone 1 oxidoreductase activities and reduced organic anion-transporting polypeptides 1a1 expression in liver after acetaminophen treatment. Our results indicate that EGCG may lower oxidative stress and reduce the metabolism and toxicity of acetaminophen. The reductions in CYP-mediated acetaminophen bioactivation and uptake transporter, as well as enhanced antioxidant enzyme activity, may limit the accumulation of toxic products in liver and thus lower hepatotoxicity

Magnetic quantum oscillations (MQO) are traditionally applied to investigate the electronic structure of metals. In layered quasi-two-dimensional (Q2D) materials the MQO have several qualitative features giving additional useful information, provided their theoretical description is developed. Within the framework of the Kubo formula and the self-consistent Born approximation, we reconsider the phase of beats in the amplitude of Shubnikov oscillations of interlayer conductivity in Q2D metals. We show that the phase shift of beats of the Shubnikov (conductivity) oscillations relative to the de Haas - van Alphen (magnetization) oscillations is larger than expected previously and, under certain conditions, can reach the value of π/2, as observed experimentally. We explain the phase inversion of MQO during the 3D - 2D crossover and predict the decrease of relative MQO amplitude of interlayer magnetoresistance in a strong magnetic field, larger than the beat frequency.

This work aims at improving surface integrity and LCF life of machined Inconel 718. The correlation between the LCF life of Inconel 718 and various states of machined surface integrity is explored. In this paper, the surface integrity of Inconel 718 specimens is enhanced by low plasticity burnishing (LPB). The LCF life with different surface integrity specimens is predicted by micro-macro finite element method (FEM). Firstly, the LCF specimens with different surface integrity are machined by turning (turned specimen), polishing (matrix specimen) and LPB process (LPBed specimen). Secondly, the LCF experiment is carried out to reveal the effect of surface integrity on LCF life. Finally, the LCF micro-macro FEM model is proposed to predict the LCF of machined Inconel 718 specimens. The representative volume element (RVE) model is established based on the measured surface integrity and microstructure of Inconel 718 specimens. The effect of surface integrity on LCF life is transformed to equivalent load. The micro-macro FEM model combined with Tanaka-Mura dislocation crack initiation theory and extended finite element method (XFEM) is applied to predict the LCF life the machined specimens. The study results show that the LCF life of LPBed specimens can be improved by 90.5% and 36.1% compared with that of turned specimens and polished matrix specimens, respectively. The errors between FEM prediction results and experimental results are 13.1%, 9.2% and 12.2%, respectively. The proposed micro-macro FEM model could be utilized to predict the LCF life of Inconel 718 with different surface integrity, and further to apply the LCF life prediction in industry.

Bioactive surface coatings have retained the attention of researchers and physicians due to their versatility and range of applications in orthopedics, particularly in infection prevention. Antibacterial metal nanoparticles (mNPs) are a promising therapeutic, with vast application opportunities on orthopedic implants. The current research aimed to construct a polyelectrolyte multilayer on a highly porous titanium implant using alternating thin film coatings of chitosan and alginate via the layer-by-layer (LbL) self-assembly technique, along with the incorporation of silver nanoparticles (AgNPs) or titanium dioxide nanoparticles (TiO2NPs), for antibacterial and osteoconductive activity. These mNPs were characterized for their physicochemical properties using quartz crystal microgravimetry with dissipation system, nanoparticle tracking analysis, scanning electron microscopy, and atomic force microscopy. Their cytotoxicity and osteogenic differentiation capabilities were assessed by AlamarBlue and alkaline phosphatase (ALP) activity assays, respectively. The antibiofilm efficacy of the mNPs tested against Staphylococcus aureus. The LbL polyelectrolyte coating was successfully applied to the porous titanium substrate. A dose-dependent relationship between nanoparticle concentration and ALP as well as antibacterial effects was observed. TiO2NP samples were also less cytotoxic than AgNP counterparts, although similarly antimicrobial. Together, these data serve as a proof-of-concept for a novel coating approach for orthopedic implants with antimicrobial and osteoconductive properties.

Iapetus, a Saturn moon, shows the most differentiated albedo dichotomy of the Solar System. The dark leading side has a lower albedo than the bright trailing side. Spectral data on the visible light reveal the existence of two types of materials on the surface. The darkening in the leading side is thought to be originated by the presence of organic material and carbonaceous compounds on surface, while the trailing side is covered by water ice due to migration processes from the dark side. On airless bodies like Iapetus, the surface escape speed is greater than the speed of water molecules, resulting in the retention of a H2O atmosphere that allows some species to get diffused through it. Here, there were performed simulations of the evolution of the surface temperature for each of the two hemispheres of Iapetus. The results showed a slow yet steady increment of temperatures for both sides, with a steeper slope for the dark hemisphere. It was also simulated how much energy budget can be accumulated in both sides and its consequences. Finally, we calculated the diffusion coefficients for ammonia, methane, and water ice. The results let us infer how these compounds could evolve over time.

The surface defects of shield subway tunnel can significantly affect the serviceability of the tunnel structure and may compromise the operation safety. To effectively detect the multiple surface defects, this research employs a tunnel inspection trolley (TIT) based on the mobile laser scanning technique. By conducting the inspection of the shield tunnel on a metro line section, various surface defects are identified by the TIT, including water leakage defect, dislocation, spalling, cross-section deformation, etc. To explore the root causes of the surface defects, the association rules between different defects are calculated via an improved Apriori algorithm. Results show that: i) there are significant differences in different association rules of various surface defects of the shield tunnel; ii) the average confidence of the association rule “dislocation &amp; spalling → water leakage” is as high as 57.78%, indicating that most of the water leakage defects are caused by dislocation and spalling of the shield tunnel in the sections being inspected; iii) the weakest rule appears at “water leakage → spalling”, with the average confidence of 13%. The association analysis can be used in predicting the critical defects influencing the structural reliability and operation safety, such as water leakage, and optimizing the construction and maintenance work for the shield subway tunnel.

A new approach to fabricate TiNi surfaces combining the advantages of both monolithic and porous materials for implants is used in this work. New materials were obtained by depositing a porous TiNi powder onto monolithic TiNi plates followed by sintering at 1200°C. Then, further modification of the material surface with a high-current-pulsed electron beam (HCPEB) was carried out. Three materials obtained (one after sintering and two after subsequent beam treatment by 20 and 30 pulses, respectively) were studied by XRD, SEM, EDX, EIS methods, profilometry and OCP measurements. Structural and compositional changes caused by HCPEB treatment were investigated. Surface properties of the samples during their storage in saline for 10 days were studied and a model experiment with cell growth (MCF-7) was carried out for the sample unmodified with electron beam to detect cell appearance on different surface locations.