Accurate and efficient battery modeling is essential to maximize the performance of isolated energy systems and to extend battery lifetime. This paper proposes a battery model that represents the charging and discharging process of a lead-acid battery bank. This model is validated over real measures taken from a battery bank installed in a research center placed at “El Chocó”, Colombia. In order to fit the model, three optimization algorithms (Particle Swarm Optimization, Cuckoo Search, and Particle Swarm Optimization+Perturbation) are implemented and compared, being the last one a new proposal. This research shows that the model with the proposed algorithm is able to estimate and manage the real battery characteristics as SOC and charging/discharging voltage. The comparison between simulations and real measures shows that the model is able to absorb reading problems, signal delays, and scaling errors. The approach we present can be implemented in other types of batteries especially those used in stand-alone systems.

In the international scenario of agriculture, Brazil stands out as the main producer and consumer of common bean (Phaseolus vulgaris L.) The increase in the productive potential of the crop is mainly due to breeding programs. The objective of this study was to estimate genetic parameters, predict genotypic values with REML/BLUP (Restricted Maximum Likelihood/Best Linear Unbiased Prediction) and, based on these values, study the variability in common bean cultivars with carioca and black grain. Twenty three agromorphological descriptors were evaluated, among them grain yield. Deviance analysis detected significant differences between the cultivars in both groups. Selective accuracy (Ac) was considered high for most of the traits. Broad-sense heritability (h_g² ) ranged from 0.05 to 0.72, but it was low for the trait yield (YLD). In the carioca grain group, the h_g² values for the traits related to plant morphology were higher than in the black group. Nevertheless, the h_g² values in the black group were higher in relation to the pod and seed traits. The correlations for YLD were moderate but different in the two commercial groups studied. In the black group, variables related to the seed morphology were correlated with grain yield, and in the carioca group, traits related to seed quantity. Based on the groupings, variability among the cultivars was observed. Three distinct clusters were formed for the carioca group and four for the black group. Based on the predicted genetic values, genetic variability and the most adapted and stable cultivars were detected among the cultivars in the studied environments.

The objective of this paper is to research the impact of electrical and physical parameters that characterize the complementary MOSFET transistors (NMOS and PMOS transistors) in the CMOS inverter for static mode of operation. In addition to this, the paper also aims at exploring the directives that are to be followed during the design phase of the CMOS inverters that enable designers to design the CMOS inverters with the best possible performance, depending on operation conditions. The CMOS inverter designed with the best possible features also enables the designing of the CMOS logic circuits with the best possible performance, according to the operation conditions and designers’ requirements.

To improve the current density distribution and electromagnetic performance of air-core inductors, a structural optimization method combining BP neural network and genetic algorithm was proposed for the study of axial and radial spiral multi-winding inductors. The Monte Carlo method was used to extract the structural size samples of the inductors, and the training dataset was obtained through finite element calculation of electromagnetic fields. Based on BP neural networks, nonlinear mapping models between the inductance value, volumetric inductance density, current distribution non-uniformity coefficient, and inductor structural parameters were constructed. The sensitivity analysis of the inductor inductance value affected by structural parameters was conducted through the Sobol index calculation. Using the current distribution non-uniformity coefficient as the fitness function and the volumetric inductance density as the constraint condition, the genetic algorithm was applied to optimize the structural parameters of the inductor globally. The optimization results were verified through finite element comparison. The results show that, under the requirement of satisfying the volumetric inductance density, the current distribution non-uniformity coefficient of AHI type inductor was reduced by 4.57% compared with the best sample in the sampling, while that of RHI type inductor was reduced by 5.33%, demonstrating the practicality of the BP-GA joint algorithm in the structural optimization design of inductors.

Quality of life (QOL) is based on their perception of their position in life in respect to their goals, expectations, standards, and concerns, as well as their culture and value systems, their workflow and workplace situations while it influences quality of services. In this study we aim to report on dental and nursing academians’ QOL and well-being at the end of the third year of the COVID-19 pandemic. The World Health Organization Quality of Life-BREF Scale (WHOQOL-BREF) tool, recording Physical, Psychological, Social and Environmental dimensions of QOL, was used. The WHOQOL-BREF was modified on a spiritual, coaching/mentoring approach in a two-step designing and validated procedure. The modified SHQOL-BREF (Spiritual Healthcare version) designed for this study, was uploaded, and filled in online during April-June 2023. Staff (N=120, 75% female) of both departments of Dentistry (44.2%) and Nursing (55.8%) of the National and Kapodistrian university of Athens, participated in anonymity. QOL in terms of physical health was reported at a higher level (M=72.2 points) compared to social relationships (M=69 points), psychological health (M=65 points) and environment (M=59 points) (scores reported in 0-100 score). Overall QOL was rated at 66 points while satisfaction from health at 72 points. Job satisfaction (M1=3.2) and spirituality (M2=3.0) were reported at a medium level in a 5-point scale, while personal beliefs and values were reported at a high level (M3=4.0). Participants age presented a significant, moderate to strong effect on physical health [F(3,97)=2.89, p<.05, η2p=.08] and on environment [F(3,97)=2.80, p<.05, η2p=.08] and marital status on social relationships [F(1,97)=9.66, p<.05, η2p=.09]. Married participants reported consistently higher levels of QOL compared to single participants, for all age groups. Department had a significant moderate effect on social relationships (F(1,97)=5.10, p<.05, η2p=.05) and education a significant moderate to strong effect on psychological health (F(2,97)=3.74, p<.05, η2p=.07). PhD level participants in both departments presented higher levels of psychological health compared to lower educational levels. Also, participants from the department of Dentistry reported higher levels of social relationships QOL in all educational groups, compared to the department of Nursing. Strategic planning on sustainability and QOL initiatives should be introduced after the COVID-19 pandemic for dental and nursing academic personnel to promote resilience and QOL scores.

The postpartum period is marked by profound changes in women at a physical, psychological, and physiological level. Many of these changes persist after four to six weeks postpartum, and most women do not resume their levels of physical activity, which increases the risk of remaining inactive for many years. It is crucial to implement effective programs that promote exercise during the postpartum period. The objective of this study was to test the feasibility and analyze the effects of a structured and supervised postpartum exercise program on the maternal health and fitness parameters. To analyze the potential effects of the intervention, the level of physical activity, quality of life, pelvic girdle and low back pain, fatigue, depression, and the level of functional and physical fitness were assessed at baseline, after 8 weeks, and after 16 weeks of intervention. Feedback on the exercise program was collected after the final assessment. The results showed that a structured and supervised postpartum exercise program was feasible and safe, and produced positive effects on selected maternal health and fitness parameters. These results will encourage a study protocol with a larger sample in order to prove its effectiveness, improve the guidelines for postpartum exercise, and incorporate this program into a routine health care setting.

MicroRNAs are small non-coding RNAs that are implicated in several physiological processes such as cell development, proliferation, differentiation, apoptosis, immune response and angiogenesis. In the last couple of decades, several studies on miRNA profiling in OSCC have tried to associate miRNAs with clinical characteristics such as relapse, metastasis, and survival, however, the results have been found to vary considerably, sometimes even being contradictory. The main objective of our study was to analyse and verify miRNA expression in oral squamous cell carcinoma in a Spanish population. Second, we attempted to associate the identified deregulated miRNAs with molecular pathways. 8 Oral Squamous Cell Carcinoma patients and 8 healthy control samples were analysed by a microarray Affymetrix® miRNA 4.1 array plate and validated with 8 more cases using RT-qPCR. Deregulated miRNAs were studied using Diana Tools miRPath 3.0 to associate miRNA targets with molecular pathways. Microarray analysis identified 80 deregulated miRNAs (35 over-expressed and 45 under-expressed). Only miR-497-5p and miR-4417 maintained its deregulated expression after validation with qPCR. Among the molecular pathways in which deregulated miRNAs could be implicated, the most statistically significant pathway was ‘proteoglycans in cancer’. No relationship was found between miR-497-5p or miR-4417 expression and clinical or pathological parameters except of nodular affectation (high miR-4417 expression in patients with nodular affectation, p = 0.035) and radiotherapy (diminished miR-497-5p expression in patients who needed radiotherapy, p = 0.05). We have verified the altered expression of miR-497-5p and miR-4417 in Oral Squamous Cell Carcinoma samples and related the deregulated miRNAs with the ‘proteoglycans in cancer’ pathway.

Time-restricted feeding (TRF) showed a potent effect in preventing obesity and improving metabolic outcomes in several animal model of obesity; however, there is, as yet, scarce evidence about its effectiveness against obesogenic challenge that more accurately mimic the human Western diets, such as cafeteria diet. Moreover, the mechanism for its efficacy is poorly understood. White adipose browning has been linked to body weight loss. Herein, we tested whether TRF has the potential to induce browning of inguinal white adipose tissue (iWAT) and to attenuate obesity and associated dyslipidemia in cafeteria diet-induced obesity model. Male Wistar rats, fed normal laboratory chow (NC) or cafeteria diet (CAF) for 16 weeks, were subdivided into two groups that were subjected to either ad libitum (ad lib, A) or TRF (R) for 8 hours per day. Rats under TRF regimen had a lower body weight gain and adiposity compared with their diet-matched ad lib rats, despite equivalent levels of food intake and locomotor activity. In addition, TRF improved the deranged lipid profile [total cholesterol (TC); triglycerides (TG); high density lipoprotein (HDL-c); low density lipoprotein (LDL-c)] and atherogenic indices [atherogenic index of plasma (AIP); atherogenic coefficient (AC); coronary risk index (CRI)] in rats fed CAF diet. Remarkably, TRF resulted in decreased size of adipocytes and induced emergence of multilocular brown-like adipocytes in iWAT of NC- and CAF-fed rats. Protein expression of browning markers, such as uncoupling protein-1 (UCP1) and peroxisome proliferator activated receptor gamma coactivator 1-alpha (PGC1α) in iWAT were also up-regulated in time restricted NC- or CAF-fed rats. These findings suggest that TRF regimen is an effective strategy to improve obesity and associated dyslipidemia induced by CAF-diet, probably via a mechanism involving WAT browning process.

The present study investigated how two types of face masks affected seven acoustic parameters, commonly used in forensic speaker recognition, in several languages. Reading samples from an excerpt of “The Little Prince” were recorded by volunteers of both genders speaking in Lithuanian, Croatian, Romanian, Turkish, Ukrainian, Portuguese, Georgian, Hungarian, Spanish, Russian, Polish, and German, without a protection mask, wearing a surgical mask, and wearing an FFP2 mask. In addition, recordings from mobile and landline communications in some of the mentioned languages were also obtained. A total of 860 volunteers were recorded. The dataset is part of the Forensic Multilingual Voices Database (FMVD), developed under the “Competency, Education, Research, Testing, Accreditation, and Innovation in Forensic Science” (CERTAIN-FORS) project, funded by the European Union (EU) and coordinated by the European Network of Forensic Science Institutes (ENFSI). The results showed that face masks have an impact on the studied acoustic parameters and that the effects vary with mask type, sex, language, and recording channel.

Humming is probably more effective than speech improving mothers' cardiorespiratory function and infants' self-regulation. We intend to understand the effects of: 1) maternal humming vs. speech on preterm infants’ physiological parameters; 2) maternal humming vs. speech on mothers’ physiological parameters; 3) humming melodic contours and of the lengthening of the final note on preterm infants’ physiological parameters. This study was designed as a single group repeated measure, using microanalytical methodology (ELAN software), with a protocol (silent baseline / speech or humming / silence / humming or speech / silence) applied to preterm dyads (N = 36). Audio and video observations were recorded. Infants’ and mothers’ heart rate (HR) and O2 saturation were observed once a minute. Proportion of O2 saturation relative to HR (Prop. O2 saturation/HR) was estimated for both partners during protocol. We found an infants’ HR mean significantly lower during humming (p = .028), a significantly higher Prop. O2 saturation/HR during humming for infants (p = .027) and for mothers (p = .029). The duration of sinusoidal contours together with the lengthening of the final note predict infants’ Prop. O2 saturation/HR. Musical features of humming seem to improve the physiological stability of preterm infants during kangaroo care.

In this paper, four lithological parameters, i.e. thermal conductivity, particle size, porosity and saturation, are investigated by combining experimental observations with numerical simulations to study the influence laws and mechanisms of action on the combustion process of methane hydrate sediments. The variation of combustion characteristics parameters such as flame height, effective combustion ratio and dimensionless discharge water mass with the lithological parameters are studied. In addition, the combustion mechanism of lithologic parameters on methane hydrate deposits is revealed. Combining the experimental results and simulation calculations, to optimize the combustion of methane hydrate sediments, it is recommended to use methane hydrate sediment samples with high saturation and low thermal conductivity, while the oxidant concentration and porosity of methane hydrate sediment samples should be increased.

Pool boiling is extensively utilized in various fields, such as electronics cooling, battery cooling, nuclear power plants, and chemical processing. In the process of temperature control through boiling, the generation and transportation of bubbles play a crucial role in calculating the heat transfer capacity of the system. Therefore, it holds immense significance to gain a profound understanding of the mechanisms underlying bubble formation, growth, and detachment. Currently, numerous mechanistic explanations and empirical correlations have been proposed to elucidate various parameters of bubbles during the boiling process. These findings were considered valuable references in selecting appropriate boiling media and designing efficient heating surfaces. To comprehensively present the progress of bubble formation and heat transfer during the boiling process, the forces exerted on the bubbles was highlighted in this article. And a meticulous review on bubble force analysis and correlation formulas pertaining to various relevant parameters (e.g. nucleation sites density, bubble growth rate, detachment diameter, detachment frequency) were conducted. This review article also were expected to provide a novel foundation for further exploration of enhanced boiling heat transfer.

The most modern technique utilized to create intricate and complexly manufactured parts for a variety of applications is called additive manufacturing (AM). Fused deposition modeling (FDM) has received the greatest attention in the development and manufacturing sectors. The main objective of this study was to investigate how printing factors affected the mechanical characteristics of printed samples. Samples were produced using an FDM 3D printer in compliance with ASTM D638 using a variety of input settings, including orientation, layer thickness, speed, and infill pattern. On the printed samples, tensile tests and morphological analysis using a scanning electron microscope (SEM) were done. The findings of this study demonstrate that factors including layer thickness, printing speed, and orientation significantly affect the tensile strength of ABS printed samples. Discovering the process settings that could lead to superior mechanical and physical characteristics would undoubtedly assist designers and manufacturers worldwide as the FDM 3D printer becomes more and more crucial in manufacturing engineering parts.

Process induced defects during thermoforming are widespread problems in laminate manufacturing. The aim of this study is to describe the effects of holding time and pressure on several properties of the manufactured laminate. A design of experiments is performed, followed by an analysis of variance to examine significant effects. Subsequently, a regression model is created to predict the laminate’s properties, which is also validated. The highest values of tensile strength and elongation at break are found for low settings of holding time and pressure. The fibre volume fraction is not affected by the process parameters. As holding time and pressure increase, significant fibre misalignment takes place, leading to a decrease of the mechanical properties. The regression model corresponds well with the validation and should be extended with further variables in subsequent studies.

To deal with the uncertainties in modeling offshore wind turbines, we proposed a parameter inversion method for the pile-soil interaction model based on structural health monitoring results and the numerical model. The proposed parameter inversion method has a numerical model, an objective function selected using both the numerical and identified results, and an inverse optimization using a random search algorithm in the assumed parameter space. The parameter results in the minimum optimization objective function are identified as the in-situ parameter. The proposed method is confirmed to converge after some iterations, whatever the initial parameter values are. However, different initial parameter cases may converge to slightly different optimal parameters, implying the pile results are sensitive to geological parameters. Moreover, a comparison with the original design results shows design redundancy or risks. Though the proposed method has several flaws, it can shed some light on the influence of uncertainties in offshore wind turbines, such as soil parameters in geological surveys.

The acoustic conditions of open-plan office spaces influence wellbeing and productivity perceived by users, but with an inadequate evaluation for workspace, acoustic design in open-plan offices can be a factor that alters user performance. Such is the case in Mexico, where there are no adequate standards to evaluate specific acoustic conditions such as intelligibility. For this reason, this case study aims to evaluate different types of measurement methods for intelligibility. This study was carried out in a university in northern Mexico. The sound measurements were based on the Mexican standard for noise analysis and the ISO 3382- part 3 standards for acoustic measurements for open-plan offices. The psychoacoustic parameters evaluated were Reverberation and Intelligibility, using objective methods determined on S/N and subjective methods based on loss of consonant; where it was analyzed distance between sound source and zones classified by building design characteristics. The results indicated in which points the intelligibility effects increased, observing that Reverberation remained stable in this office, and that the subjective methods presented greater size of the measured sound effect than the objective methods. This finding establishes that subjective methods conformed to Lognormal behavior, which is applicable to other linguistic elements describing speech behavior.

Anatomical airways parameters as length, diameter and angles have a strong effect on the flow dynamics. Aiming to explore the effect of variations of the bifurcation angle (BA) and carina rounding radius (CRR) of lower human airways on the respiratory processes, numerical simulations of airflow during inhalation and exhalation were performed using a synthetic bifurcation models. Geometries for the airways models were parameterized based on a set of different BA's and several CRR's. A range of Reynolds numbers (\Reyn) relevant to the human breathing process were selected to analyzed the airflow behaviour. The numerical results show a significant influence of BA and the CRR on the development of the airflow within the airways, and therefore affecting some relevant features of the flow, namely the deformation of velocity profiles, alterations of pressure drop, the flow patterns, and finally enhance or attenuation of wall shear stresses (WSS) appearing during the regular respiratory process. Numerical results show that increases in the bifurcation angle value are accompanied by pressure increases of about 20\%, especially in the regions close to the bifurcation. Similarly, increases in the BA value lead to a reduction in peak shear stresses of up to 70\%. For the ranges of angles and radii explored, an increase in pressure of about 20\% and a reduction in wall shear stress of more than 400\% were obtained by increasing the carina rounding radius. Analysis of the coherent structures and secondary flow patterns also revealed a direct relationship between the location of the vortical structures, the local maxima of the velocity profiles and the local vorticity minima. This relationship was observed for all branches analysed, for both the inhalation and exhalation processes of the respiratory cycle.

The increasingly affordable price point of terrestrial laser scanners has led to a democratization of instrument availability, but the most common low-cost instruments have yet to be compared in terms of the consistency to measure forest structural attributes. Here, we compared two low-cost terrestrial laser scanners (TLS): the Leica BLK360 and the Faro Focus 120 3D. We evaluate the instruments in terms of point cloud quality, forest inventory estimates, tree-model reconstruction, and foliage profile reconstruction. Our direct comparison of the point clouds showed reduced noise in filtered Leica data. Tree diameter and height were consistent across instruments (4.4% and 1.4% error, respectively). Volumetric tree models were less consistent across instruments, with ~29% bias, depending on model reconstruction quality. In the process of comparing foliage profiles, we conducted a sensitivity analysis of factors affecting foliage profile estimates, showing a minimal effect from instrument maximum range (for forests less than ~50 m in height) and surprisingly little impact from degraded scan resolution. Filtered unstructured TLS point clouds must be artificially re-gridded to provide accurate foliage profiles. The factors evaluated in this comparison point towards necessary considerations for future low-cost laser scanner development and application in detecting forest structural parameters.

Synthesis of zeolite T with a variety of desired characteristics necessitate extensive work in the formulation and practical experiments either by conventional hydrothermal methods or aided with different approaches and synthesis techniques such as secondary growth or microwave irradiation. The objectives of this review are to adduce the potential work in zeolite T (Offretite-Erionite) synthesis evaluating determining factors affecting the synthesis and quality of the zeolite T crystals. Attention is given to the extensive studies that interconnect with other significant findings.

This paper examines the influence of physical parameters on the collapse dynamics of a spherical bubble filled with diatomic gas ($\kappa=7/5$). The present numerical investigation shows that each physical parameter affects the bubble collapse dynamics differently. After comparing the contribution of each physical parameter, it appears that, of all the parameters, the surrounding liquid environment affects the bubble collapse dynamics the most. Meanwhile, surface tension has the weakest influence and can be ignored in the bubble collapse dynamics. However, surface tension must be retained in the initial analysis since this, as well as the pressure difference jointly control initial bubble formation. As an essential part of this study, a general Maple code is provided.

This paper presents a concise exploration of several analytical methods for extracting the parameters of the single-diode model (SDM) of a photovoltaic (PV) module under standard test conditions (STC). The paper investigates six methods and presents the detailed mathematical analysis leading to the development of each method. To evaluate the performance of these methods, MATLAB-based software has been developed and deployed to synthesize the results of each method when used to extract the SDM parameters of various PV test modules of different PV technologies. Similar software has also been developed to extract the same parameters using well-established numerical and iterative techniques. A comparison is subsequently made between the synthesized results and those obtained using numerical and iterative methods. The comparison indicates that in spite of the fact that analytical methods may involve fair amount of approximations, their accuracy can be comparable to that of their numerical and iterative counterparts, with the added advantage of significant reduction in computational complexity, and without the initialization and convergence difficulties, which are normally associated with numerical methods.

Vibrotactile displays have been reported effective in enhancing awareness of flight attitude for pilots and releasing other heavily loaded sensory channels. Although some work have been done on vibrotactile coding of flight altitude, there is lack of a systematic investigation into coding methods with combination of multiple coding parameters. In this paper, seven coding methods with combinations of multiple coding parameters (location, rhythm, intensity, and mode) were systematically studied to cue flight attitude for pilots with a vibrotactile vest. We conducted two psychophysical experiments in a static tactile sensory environment in which the attitude commands in the form of vibrotactile feedback are presented randomly, and quantitatively evaluated the effectiveness of the vest according to the users’ recognition accuracy, reaction time and information transfer rate. The results show that vibrotactile vest is effective to cue attitude information. The preferred coding method with combinations of location, rhythm and mode allowed users to perform with lowest reaction time and highest recognition accuracy and yield about 255 bits/min of information transfer rate. Overall, the presented work provides valuable insights and guidance for the design of haptic displays for vibrotactile aids for the pilots.

Drought is treated as a key natural disaster that affects numerous segments of the natural environment and economy throughout the world. Drought indices (DIs) were computed for Potwar region (PR) in Punjab-Pakistan, using DrinC software which are deciles, Standard Precipitation Index (SPI) and Reconnaissance Drought Index (RDI). Drought situation of 12, 9, 6 and 3 months was estimated on temporal basis. DIs obtained by deciles technique showed that for the last 39 years, 8-years are with drought severity in a cycle and are occurring every 2 to 7-years just the once repetitively. The RDI and SPI index showed the analogous trends as of deciles. Though, for RDI and SPI, the extremely dry and severely dry class was merely two years and rest of the drought affected years with respect to deciles were normally and intermediately dry. SPI is better as compared to deciles as the severity is better understood in the context of SPI. Regression analysis revealed that the RDI and SPI indices are mutually interrelated and if first 3 month precipitation is obtainable one can forecast yearly RDI. This investigation is valuable to devise future development plans to contest vulnerable drought incidents, its mitigation and impacts on socio-economic sectors.

Introduction: Obesity affects over 650 million individuals worldwide and it is a major public health problem. Bariatric surgery is the most effective treatment for severe obesity, resulting in significant weight reduction and improvement in obesity-related conditions. However, the weight loss achieved through bariatric surgery often correlates with a notable decrease in skeletal muscle. This correlation suggests an elevated risk of sarcopenia among patients after surgery. The aim of this study was to evaluate the effects of obesity and bariatric surgery on sarcopenia-related indicators and diagnosis before and after surgery. Methods: A total of 17 bariatric surgery patients were included in this prospective study. The parameters to diagnose sarcopenia were determined for each participant, based on EWGSOP2 and EASO/ESPEN consensuses. All evaluations were performed on the five moments of this study: before surgery and at 1, 6, 12 and 18 months after surgery. Results: In this study, 88.2% of the subjects were female, the mean BMI was 42.9 kg/m² and the mean weight was 105.9 kg. After surgery, the mean weight consistently decreased, with all differences from baseline being statistically significant (p<0.001). When using the SARC-F questionnaire for screening, the risk of sarcopenia increased post-surgery, and decreased at 12 months, declining to zero at 18 months. Muscle strength decreased significantly (p=0.002) at the 1 month after surgery assessment, with slight variations thereafter, none statistically significant. Muscle mass was normal before surgery but decreased significantly post-surgery (p<0.001). When applying the ESPEN/EASO consensus cut-off criteria for sarcopenic obesity, 35.3% of the patients met the criteria preoperatively. After surgery, the results increased to 70.6% in the first month but decreased afterward to 41.2% at 6 months. Discussion: This study evaluated the impact of bariatric surgery on sarcopenia and sarcopenic obesity, for a duration of up to 18 months after surgery, using the EWGSOP2 and ESPEN/EASO consensuses criteria. Bariatric surgery, the most effective treatment for severe obesity, often results in muscle mass loss alongside fat loss. Handgrip strength, a key sarcopenia indicator, showed a significant early post-surgery decline, whereas the weight-dependent sit-to-stand test did not. This suggests weight loss impacts different muscle function tests variably. Muscle mass decreased continuously after surgery. However, other indicators had mixed results. Applying ESPEN/EASO guidelines, the study found a temporary post-surgery increase in sarcopenic obesity, peaking at one month and returning to pre-surgery levels by six months. However, different criteria led to different results. Conclusion: The results indicate a clear deleterious impact of bariatric surgery on muscle strength and mass, the most important indicators of sarcopenia. Also, the impact seems to occur very early after surgery, indicating that the appropriate timeframe to try to prevent this effect may be the prehabilitation period followed by the post-surgery timeframe.

The tambaqui Colossoma macropomum is the main species of edible fish originating from fish farming in the Amazon region. This study aimed to determine and compare the hematological and biochemical parameters of tambaqui from fish farms in municipalities in the Metropolitan Region of Manaus, Amazonas, Brazil. Two fish farms were sampled in a semi-excavated pond-type breeding system in each of the five towns investigated (Presidente Figueiredo, Manaus, Iranduba, Manacapuru and Novo Airão), totaling ten breeders. On each farm, ten specimens were captured, totaling 100 animals. Blood was collected by caudal puncture, and hematological and biochemical parameters were determined using the methodology described for teleosts fish. For the erythrogram in the variables of hematocrit, hemoglobin concentration and erythrocytes, significant differences were observed in Iranduba and Novo Airão, demonstrating indications of anemic processes and dehydration. For plasma biochemistry, low levels were observed in fish from Iranduba and Novo Airão. High values in lipid compounds were found in tambaqui from Manacapuru. High intraspecific variation was found in the leukogram and thrombogram, which determined similarities between tambaqui from different farms and municipalities. On the other hand, fish from Manacapuru have an inappropriate diet, indicated by the high levels of cholesterol and triglycerides found in the blood.

The study focuses on the impact of new methods for inhibiting malolactic fermentation in white wines on their analytical and sensory properties. Enological preparations with different mecha-nisms of effect were tested: fumaric acid, chitosan, Estaan (a preparation based on tannin inhibi-tion), medium-chain fatty acids (MCFA), sulphur dioxide and a control variant where malolactic fermentation (MLF) was performed. The samples underwent analysis through HPLC (high-performance liquid chromatography) to determine concentrations of malic and lactic acid, as well as biogenic amines. GC (gas chromatography) analysis was used to monitor volatile sub-stances, alongside sensory evaluation. The study demonstrated a significant influence of indi-vidual enological preparations on the aromatic profile of the examined wines. The SO2 and MCFA variants exhibited the highest concentrations of volatile substances within the esters group, spe-cifically isoamyl acetate, 1-hexyl acetate and phenylethyl acetate. Conversely, the fumaric acid and Estaan variants displayed the lowest concentrations of these esters. The most notable disparities were observed in acetoin concentration, with the MCFA variant exhibiting the lowest values. Additionally, the chitosan variant showed higher concentrations of putrescine and spermidine compared to the MCFA and fumaric acid variants, which presented the lowest levels.

Ballasted railway tracks can be modelled using reduced/simplified models composed of several layers of discrete components. This paper deals with the two-layer model, which is very popular due to its computational efficiency. In order to provide some recommendations for track design, it is necessary to identify which set of parameters leads to some irregular/unexpected behavior. Such irregularity is investigated at three levels, such as: (i) critical velocity of moving constant force; (ii) instability of a single moving mass; (iii) instability of two moving masses. All results are presented in dimensionless form to cover a wide range of real parameters. Irregular cases are identified by sets of parameters leading to them and then general conclusions are drawn. Regarding the method, all results are obtained analytically or semianalytically, where “semi” refers to solving the roots of a given polynomial by predefined numerical procedures in symbolic software. No numerical integration is involved in all results presented. This means that the results are highly accurate and refer to exact values, so any kind of parametric or sensitivity analyses is readily possible.

This study aimed to analyse the variation of recreational water quality in Plettenberg Bay in an attempt to comprehend the effects of pollution on the environment, and more specifically the potential impacts on the quality of surface water used for recreational activities. Plettenberg Bay is a major destination for tourists in South Africa, with recreational water activities representing an important attraction. For this study, data were obtained from Bitou Municipality, the local au-thority in charge of the water monitoring program in Plettenberg Bay. The selected datasets contained water quality data collected by the Bitou Municipality waterworks department in three sampling sites in Plettenberg Bay. The samples were tested for six water quality parameters namely, Ammonia, Suspended Solids, Conductivity, Nitrates/Nitrites, pH, and E coli. Water quality trends appeared stabile over the five years, with only a few parameters showing variation in their concentration levels. It is recommended that the Bitou Municipality increase the sampling frequency to allow a clearer understanding of water quality variation and to minimise potential uncertainties.

The objective of this research was to evaluate the physicochemical and sanitary parameters of raw cow's milk intended for consumption in the Amazonas region, Peru. We sampled 31 collection centers and dairy processors. We evaluated physicochemical parameters (fat, protein, solids not fat, lactose, ash, pH, and density), somatic cell count, and microbiology (mesophilic aerobic bacteria and total coliforms) of raw milk. We applied an analysis of variance (α=0.05) and the comparison of means between the collection centers and livestock basins (p&lt;0.05). In addition, we performed a cluster analysis, principal components and correlation. Depending on the collection center, we found differences in all the physicochemical parameters, somatic cell count and milk microbiology. In the livestock basin analysis, we found differences for somatic cells, fat, protein, solids, pH, coliforms and bacteria. The Jumbilla basin presented less somatic cells, less fat was found in the Levanto basin and higher protein in the Yambrasbamba basin. Lactose, ash, density, total coliforms and mesophilic aerobic bacteria did not vary according to basin. The cluster analysis yielded four groups, Group 1 is higher in ash and density, Group 2 and 3 are higher in fat, Group 3 with higher protein, but higher in total coliforms and mesophilic aerobic bacteria. Group 4 registered the highest pH and the lowest protein concentration. There was a positive correlation of fat with protein and solids not fat, lactose with solids not fat, ash with density. Negative correlations of somatic cells with fat and, protein and solids not fat with pH.

Mangroves play an important role as a carbon sink and in mitigation of climate change. This study aimed to assess the anthropogenic activities, water and soil quality, mangrove diversity, and carbon sequestration potential of mangrove trees in the Kaingen River, Kawit, Cavite. The sampling period was conducted from November 2022 to March 2023 with the established three sampling sites. The DENR Administrative Order (DAO)- 2016-08 was used as a standard for water quality parameters, except for phosphates which used DAO-2021-19. The soil parameters were identified using the soil test kit from the Bureau of Soil and Water Management (BSWM) and at the BSWM laboratory. Mangrove species were identified using The Field Guide for Philippine Mangroves and were verified by experts. The carbon sequestration potential was obtained using an allometric equation for Southeast Asian mangroves. There are three mangrove species found in Kaingen Riverine such as Rhizophora mucronata, Avicennia alba, and Xylocarpus granatum. Based on species importance value Rhizophora mucronata is the dominant mangrove species. The result for carbon sequestration of each mangrove species showed that Rhizophora mucronata yielded the highest carbon stored (35.16 tC/ha) and carbon sequestered (128.92 tCO₂/ha). Among all the sampling sites, site 3 yielded the highest carbon stored (30.76 tC/ha) and carbon sequestered (112.81 tCO₂/ha) in Kaingen River. Overall, the results of the study showed that Kaingen River can potentially store carbon at 71.89 tC/ha and CO2 sequestered at 263.62 tCO₂/ha. This urges to practice conservation and protection measures for the mangroves forest of Kaingen River.

The welding and construction processes of H-type thick-plate-bridge steel involve complex multi-pass welding processes, which is difficulty to ensure its welding performance. Accordingly, it is crucial to explore the inherent correlation among the welding processes parameters and welding quality, and applied it into the welding robots, eliminating the instability from manual welding. In order to improve the welding quality, the GMAW (Gas Metal Arc Welding) welding process parameters are simulated using the Q345qD bridge steel flat joint model. Four welds with X-shaped grooves are designed to optimize the parameters of welding current, welding voltage, and welding speed. The optimal welding process parameters are investigated through thermal-elastic-plastic simulation analysis and experimental verification. The results indicate that when the welding current is set to 230A, the welding voltage to 32V, and the welding speed to 0.003m/s, the maximum deformation of the welded plate is 0.52mm, with a maximum welding residual stress of 345MPa. Both the simulation results of multi-pass welding and experimental tests meet the welding requirements, as they show no excessive stress or strain. These parameters can be applied into building large steel frame bridges with welding robots, improving the quality of welded joints.

This study assessed the relationship between head posture displacements and biomechanical parameters in three different tasks. One hundred male and female students (20 ± 3yrs) were assessed via the PostureScreen Mobile app to quantify postural displacements of head rotations and translations including: 1) the cranio-vertebral angle (CVA) (°), 2) anterior head translation (AHT) (cm), 3) lateral head translation in the coronal plane (cm), and 4) lateral head side bending (°). Biomechanical parameters during gait and jumping were measured using the G-Walk sensor. The assessed gait spatiotemporal parameters were cadence (steps / min), speed (m / s), symmetry index, % left and right stride length (% height), and right and left propulsion index. The pelvic movement parameters were: 1) tilt symmetry index, 2) tilt left and right range, 3) obliquity symmetry index, 4) obliquity left and right range, 5) rotation symmetry index, and 6) rotation left and right range. The jump parameters measured were: 1) flight height (cm), 2) take off force (kN), 3) impact Force (kN), 4) take off speed (m / s), 5) peak speed (m / s), 6) average speed concentric phase (m / s), 7) maximum concentric power (kW), 8) average concentric power (kW) during the counter movement jump (CMJ), and 9) CMJ with arms thrust (CMJAT). At a significance-level of p ≤ 0.001, moderate to high correlations (0.4 &lt; r &lt; 0.8) were found between CVA, AHT, lateral translation head and all the gait and jump parameters. Weak correlations (0.2 &lt; r &lt;  0.4) were ascertained for lateral head bending and all the gait and jump parameters except for gait symmetry index and pelvic symmetry index, where moderate correlations were identified (0.4 &lt; r &lt; 0.6). The findings indicate moderate to high correlations between specific head posture displacements, such as CVA, lateral head translation and AHT with the various gait and jump parameters. These findings highlight the importance of considering head posture in the assessment and optimization of movement patterns during gait and jumping. Our findings contribute to the existing body of knowledge and may have implications for clinical practice and sports performance training. Further research is warranted to elucidate the underlying mechanisms and establish causality in these relationships, which could potentially lead to the development of targeted interventions for improving movement patterns and preventing injuries.

This study aimed to identify and differentiate the factors that may affect the incidence of temporomandibular joint (TMJ) dysfunction in children with type 1 diabetes. We analyzed the TMJ symptoms, clinical and laboratory parameters of type 1 diabetes in a cohort of 101 consecutive patients. The participants were evaluated regarding the presence of pain in the masticatory muscles, TMJ sounds, mouth opening, maximum mouth opening, lateral and protrusive excursions, and Fonseca scores. The overall cohort showed a mean Fonseca score of 20 ± 13.89, referred to mild TMJ dysfunction. Of patients, 34.65% presented at least one clinical symptom and were defined as having dysfunction. The most frequently recorded symptom was TMJ sounds, presented in 16.8% of children. In subjects with dysfunction compared to those without dysfunction, a significant difference was found at height standard deviation scores, Fonseca scores and maximum mouth opening (p&lt;0.001). HbA1c levels, diabetes duration, age and gender did not reveal any significant differences between the patients with and without dysfunction. Type 1 diabetes is often associated with limited mouth opening and mild TMJ dysfunction. This dysfunction may reflect a more chronic condition and possibly exceeds the prevalence of cheiroartropathy. This study could be a starting point towards enhancing our understanding of clinically evident TMJ involvement in type 1 diabetes.

Glutathione (GSH) and melatonin (MLT) are two antioxidants that have been described as having a protective role against oxidative stress in several animal species, improving sperm quality and survival after cryopreservation. Since there is no knowledge on the simultaneous use of these two substances concerning its effects on ram semen cryopreservation, this study aimed to evaluate the effects of MLT, GSH, or their association, on in vitro parameters of ram semen after thawing. During eight weekly sessions, the semen from three Merino rams was pooled, divided into four aliquots, and diluted with an egg yolk-based semen extender without (control) and with antioxidants (MLT 1mM, GSH 5mM, and MLT 1mM + GSH 5mM). Diluted semen was evaluated before and after freezing process. Supplementation of fresh semen with GSH at 5 mM had a deleterious effect on total motility progressive (TPM), curvilinear velocity (VCL), straight-line velocity (VSL), average-path velocity (VAP), linearity (LIN), straightness (STR) and increased slow spermatozoon (%). MLT at 1 mM also has a negative effect on TPM, VSL, and STR in fresh semen. In thawed semen, 1 mM of melatonin increased the TPM regarding the group control. Also, the combination of both antioxidants attenuates the negative effect of GSH 5mM on TPM, VSL and BCF. These results indicate that 5mM GSH impairs or does not improve sperm kinetic parameters in fresh semen and suggest that melatonin when combined with GSH plays a protective role on these effects.

The increase in the production and entry of greenhouse gases into the earth's atmosphere has disturbed the balance of the environment. The signs of climate change (caused by global warming) are clearly visible and its effects are tangible. According to the United Nations, if the current trend continues, the global average temperature will increase by 3.2°C by the end of the century, which will have terrible consequences if it happens. This research aimed to investigate the effects of greenhouse gases and climate changes resulting from them on Hyrcanian forests. The Hyrcanian forests, as one of the oldest forest areas (remaining from the Paleogene era), were studied by telemetry from 2013 to 2021. The analysis of the images taken from the Landsat 8 satellite showed that during 9 years, the NDVI index decreased by 0.6 units and the average air temperature increased by 0.5°C. Although the average relative humidity has only increased by 2%, the average annual rainfall has recorded an increase of 25mm. The analysis of the statistics showed that the rains occur irregularly and are often torrential. Therefore, it is predicted that as the average temperature continues to increase, the NDVI index will further decrease, and as a result, the forest cover will become weaker and the soil will lose more water absorption power, and due to the increase in average rainfall. successive floods will occur. Therefore, soil erosion increases and the extinction and migration of plant and animal species increase significantly.

Glass fibers slowly dissolve and age when exposed to water molecules. Such a phenomenon also occurs when glass fibers are inside fiber-reinforced composites protected by the matrix. This en-vironmental aging results in the deterioration of the mechanical properties of the composite. In structural applications, GFRPs are continuously exposed to water environments for decades (typically design lifetime is around 25 years or even more). During their lifetime, these materials are affected by various temperatures, pH acidity levels, mechanical loads, and the synergy of these factors. The rate of the degradation process depends on the nature of glass, sizing, fiber orientation, and environmental factors such as acidity, temperature, and mechanical stress. In this work, degradation of typical industrial grade R-glass fibers, when inside an epoxy fiber-reinforced composite, is studied experimentally and computationally. A Dissolving Cylinder Zero-Order Kinetic (DCZOK) model was applied and could describe the long-term dissolution of glass composites, considering the influence of fiber orientation (hoop vs transverse), pH (1.7, 4.0, 5.7, 7.0, and 10.0), and temperature (20, 40, 60, and 80 °C). The limitations of the DCZOK model and effects of sizing protection, accumulation of degradation products inside the composite, and water availability were discussed. Experimentally dissolution was measured using ICP-MS. Like for the fibers, for GFRPs also, the temperature showed an Arrhenius-type influence on the ki-netics, increasing the rate of dissolution exponentially with increasing temperature. Similar to fibers, GFRPs showed a hyperbolic dependence on pH. The model was able to capture all of these effects, and the limitations were addressed.

Influence of the volute design parameters on the stable operating range and the performance of a centrifugal compressor was investigated experimentally for the following design conditions. The volute casing surface roughness was changed from 0 to 200 µm in five steps and tested. The axial distance between the casing and the diffuser cascades (clearance) was varied in five steps as C/b₂ = 1.2, 2.4%, 3.6%, 4.8%, and 6% relative to the impeller exit width. The radial distance from the impeller blade exit to the diffuser vane inlet in (vaneless space radius) in six steps as C/r₂ = 1.03, 1.05, 1.07, 1.09, 1.11, and 1. 13 relatives to the rotor outlet radius. The volute outlet geometry of a symmetric and tangent with different area ratios from 0.4 to 0.9. Finally, the compressor has been tested experimentally with different pinched vaned diffuser distances relative to the impeller exit width of bp/b2 =1, 0.98, 0.96, 0.94, 0.92, and 0.9. These testes were carried at different compressor operating conditions, and the time variations of the static pressure were recorded using five high-frequency response pressure transducers. A hot-wire anemometer is used to measure the compressor flow rate. The rotating stall and surge at the vaneless zone after the impeller exit can be detected by analyzing the fluctuations of pressure signals and the power spectrum density by using the Fast Fourier Transformation analysis. The experimental results indicated that the compressor with volute casing surface roughness of 100mm gives about 10.9% enhancements in the stable operating and 1% in pressure rise coefficient. The best axial distance between the diffuser vanes and the casing is 2.4% of the impeller blade height and the compressor in this design gives about 12.4% improvements in the stable working range. The compressor with radial vaneless distance of 1.056 gives improvements of about 16.6% in the surge margin, 2% in the pressure recovery and 4% in pressure rise coefficients. The compressor with a pinched diffuser of b/bp of 0.98 gives an improvement of 20.8% in surge point.

In clinical diagnostics and longitudinal studies, the reproducibility of MRI assessments is of high importance in order to detect pathological changes, but developments in MRI hard- and software often outrun extended periods of data acquisition and analysis. This could potentially introduce artefactual changes or mask pathological alterations. However, if and how changes of MRI hardware, scanning protocols or preprocessing software affect complex neuroimaging outcomes from e.g. diffusion weighted imaging (DWI) remains largely understudied. We therefore compared DWI outcomes and artefact severity of 121 healthy participants (age range 19-54 years) who underwent two matched DWI protocols (Siemens product and Center for Magnetic Resonance Research sequence) at two sites (Siemens 3T Magnetom Verio and Skyra^fit). After different preprocessing steps, fractional anisotropy (FA) and mean diffusivity (MD) maps,obtained by tensor fitting, were processed with tract-based spatial statistics (TBSS). Inter-scanner and inter-sequence variability of skeletonised FA values reached up to 5% and differed largely in magnitude and direction across the brain. Skeletonised MD values differed up to 14% between scanners. We here demonstrate that DTI outcome measures strongly depend on imaging site and software, and that these biases vary between brain regions. These regionally inhomogeneous biases may exceed and considerably confound physiological effects such as ageing, highlighting the need to harmonise data acquisition and analysis. Future studies thus need to implement novel strategies to augment neuroimaging data reliability and replicability.

The first objective of this paper is to investigate the scaling behavior of liquid-vapor phase transition in FCC and BCC metals starting from the zero-temperature four-parameter formula for cohesive energy. The effective potentials between the atoms in the solid are determined using lattice inversion techniques as a function of scaling variables in the above formula. These potentials are split into repulsive and attractive parts as per the Weeks-Chandler-Anderson prescription, and used in the coupling-parameter expansion for solving the Ornstein-Zernike equation supplemented with an accurate closure. Thermodynamic quantities obtained via the correlation functions are used to obtain critical point parameters and liquid-vapor phase diagrams. Their dependence on the scaling variables in the cohesive energy formula are also determined. Equally important second objective of the paper is to revisit coupling parameter expansion for solving the Ornstein-Zernike equation. The Newton-Armijo non-linear solver and Krylov-space based linear solvers are employed in this regard. These methods generate a robust algorithm that can be used to span the entire fluid region, except very low temperatures. Accuracy of the method is established by comparing the phase diagrams with those obtained via computer simulation. Avoidance of the 'no-solution-region' of Ornstein-Zernike equation in coupling-parameter expansion is also discussed. Details of the method and the complete algorithm provided here would make this technique more accessible to researchers investigating thermodynamic properties of one component fluids.

Insects quickly develop resistance to conventional chemical insecticides. The use of silica nanoparticles (SiO₂NPs) is a promising new approach for managing insect pests. The insects that have been studied are, in most cases, external feeders and internal leaf feeders have not been well studied. Here, we investigate the efficiency of SiO₂NPs in controlling the American serpentine leafminer Liriomyza trifolii (Diptera: Agromyzidae), a devastating insect pest of a wide range of crops. SiO₂NPs at concentrations of 50, 100, 200 and 400 mg/L compared to a control of distilled water were applied to intact Phaseolus vulgaris leaves by spraying to evaluate their effects, via the plant, on the number, survival, developmental/feeding speed, body mass/size and sex ratio of L. trifolii released after spraying. A qRT-PCR analysis was conducted to assess oxidative stress in L. trifolii based on the gene expression level of the two major antioxidant enzymes; catalase and superoxide dismutase. The number of mines, survival rate and puparia weight were lower than the control at the highest concentration of SiO₂NPs, while pupariation was delayed at most of the concentrations studied and puparium weight/size decreased at low concentrations. Sex ratio was not affected by SiO₂NPs. Gene expression levels of the antioxidant enzymes at the pupal stage were not significantly affected by SiO₂NPs at any concentration but some individuals showed up-regulation at low SiO₂NP concentrations, inferring development of resistance. This study demonstrated that a priori application of the highest concentration of SiO₂NPs to plants effectively reduces a leafminer population but that application of even the lowest concentration can decrease the life history trait values of surviving leafminers.

Studies on the gait's parameters have been identified on the patients population. Most researchers confirm that the patients walk differently than normal people and they may have a risk for falls. Consistent finding and description of gender, age, and body mass index differences in gait studies is rare in healthy subjects. A cross-sectional study with forty-five young adult (F = 20, M = 25) was conducted. Stadiometer and Physilog 4 inertial sensors were used for data collection. A gait analyser 5.2 software (GaitUp, S.A. Lausanne, Switzerland) was used to determine spatiotemporal parameters. No statistically significant differences were found in any bilateral foot gait parameters with respect to gender, age, and body mass index. Females are found with higher total double support and cadence than males. Cadence also increases with age. Obese people showed lower gait speed, cadence, and total double support. These findings may be beneficial to those who have abnormal gait pattern due to age, body mass index differences, decreased muscle strength, spasticity, and joint mobility. This important informations should be considered to rehabilitate patients with abnormal gait patterns to controlling dynamic balance and riks to falling.

Overactive bladder (OAB) is characterized by urinary urgency and increased urinary frequency, and can impact quality of life significantly. Tamsulosin and mirabegron combination therapy has been studied as a safe and effective treatment option for patients with OAB. This study evaluated the effects of combining these two drugs on their pharmacokinetics and safety profiles in healthy Korean males. In this open-label, fixed-sequence, 3-period, drug-drug interaction phase 1 study, a total of 36 male participants were administered multiple doses of tamsulosin alone (0.2 mg once daily), mirabegron alone (50 mg once daily), and a combination of both drugs. The results showed that the combination of tamsulosin and mirabegron increased tamsulosin exposure in the plasma by approximately 40%. In contrast, the maximum plasma concentration of mirabegron reduced by approximately 17%, when administered along with tamsulosin. No clinically significant changes in safety profiles, vital signs, or clinical laboratory test results were observed in this study. In conclusion, there were no clinically relevant drug-drug interactions between tamsulosin and mirabegron in terms of pharmacokinetics, safety, and tolerability, suggesting that their combination therapy could be a promising treatment option for patients with OAB.

The study presents the effect of annealing process parameters on the microstructure, hardness and strain hardening coefficients i.e., the strength coefficient c and the strain hardening exponent n, of 42CrMo4 steel. Seven selected annealing time-temperature schemes are examined for superior steel formability in cold metal forming conditions. The c and n coefficients are first determined in experimental upsetting of annealed samples and then used in FEM simulations of the upsetting process. The results demonstrate that the strain hardening coefficients (c and n) depend on the employed annealing scheme. Compared to the as-received sample, the annealing process reduces the true stress and effectively decrease the hardness of 42CrMo4 steel, improves microstructural spheroidization and, consequently, facilitates deformability of this material. The annealing schemes relying on heating the material to 750 °C and its subsequent slow cooling lead to the highest decrease in hardness ranging from 162 to 168HV. Results obtained with the SEM-EDS, LOM and XRD methods lead to the conclusion that the employed heat treatment schemes cause the initial ferritic-pearlitic microstructure to develop granular and semi-lamellar precipitation of cementite enriched with Mo and Cr in the ferrite matrix. In addition, the annealing process affects the growth of α-Fe grains. The highest cold hardening rate, and thus formability, is obtained for the annealing scheme producing the lowest hardness. The results of FEM simulations are positively validated by experimental results. Obtained results are crucial for further numerical simulations and experimental research connected with developing new cold metal forming methods for producing parts made of 42CrMo4 steel.

Introduction: Obstructive sleep apnea (OSA) is the most common sleep-breathing disorder. OSA is associated with cardiovascular diseases such as coronary artery disease (CAD) and arrhythmias with an increased risk of sudden cardiac death. Some changes in ECG markers are seen as an indicator of arrhythmogenicity, especially ventricular arrhythmias. The goal of this study was to investigate if OSA patients with CAD have QT dispersion and T peak to T end (TpTe) changes as a surrogate of arrhythmogenicity. Methods: We studied 75 patients with CAD who underwent polysomnographic studies. Patients were categorized into mild, moderate, and severe OSA according to the Apnea hypopnea index (AHI). Baseline ECG and echocardiography for assessing LV function and valvular heart disease were done for all of them. Results: Results showed that in patients with moderate and severe sleep apnea QT dispersion was higher in a group with more involvement of coronary artery disease, reduced ejection fraction, and a history of old MI. However, we didn’t find any significant statistical relationship between OSA and TpTe marker. Conclusion: Our results showed a positive relation between ECG arrhythmic indices such as QT dispersion and OSA severity in patients with CAD.

Due to the advantages of wide coverage and continuity, remotely sensed data are widely used for large-scale drought monitoring to compensate the deficiency and discontinuity of meteorological data. However, few researches have focused on the capability of various remotely sensed drought indices (RSDIs) for representing the spatio-temporal variations of the meteorological droughts. In this study, five RSDIs, namely Vegetation Condition Index (VCI), Temperature Condition Index (TCI), Vegetation Health Index (VHI), Modified Temperature Vegetation Dryness Index (MTVDI) and Normalized Vegetation Supply Water Index (NVSWI) were calculated using Moderate Resolution Imaging Spectroradiometer (MODIS) monthly NDVI and LST. The monthly NDVI and LST data were filtered by Savitzky-Golay (S-G) filtering method. Meteorological station-based drought index represented by Standardized Precipitation Evapotranspiration Index (SPEI) was compared with RSDIs. And the dimensionless Skill Score (SS) method was adopted to identify the spatiotemporally optimal RSDIs for presenting the meteorological droughts in the Yellow River basin (YRB) from 2000 to 2015. The results indicated that (1) RSDIs revealed a decreasing trend to the overall YRB consistent with SPEI except for in winter, and different variations of seasonal trends spatially; (2) the optimal RSDIs in spring, summer, autumn and winter were VHI, TCI, MTVDI and VCI, respectively, and the average correlation coefficient between the RSDIs and SPEI was 0.577 (=0.05); (3) different RSDIs have a 0–3 months’ time-lags compared with meteorological drought index.

This study explores the efficacy of using EEG-based parameters to diagnose bipolar disorder. A synthetic dataset was generated, including both correctly diagnosed and misdiagnosed cases, simulating realistic clinical conditions. EEG features such as theta-alpha mean, beta band mean, and coherence measures were used to train a multi-layer perceptron (MLP) model. The model achieved a validation accuracy of 92%, demonstrating strong potential for EEG-based diagnostics. However, challenges such as standardization of electrode configurations and addressing equipment differences are crucial for broader applicability and validity of the findings in diverse clinical settings.

Lately, radiomic studies featuring the development of a signature to use in prediction models in diagnosis or prognosis outcomes are being published increasingly. While the results are shown to be promising, these studies still have many pitfalls and limitations. One of the main issues of this methodology is that radiomic features depend on how the images are preprocessed before their computation. Since, in widely known and used software for radiomic features calculation, it is possible to set these preprocessing parameters before the calculation of the radiomic feature, there are ongoing studies assessing the stability and repeatability of radiomic features to find the most suitable preprocessing parameters for every used imaging modality. This review examines the impact of preprocessing parameters on the reproducibility and reliability of radiomic features extracted from multimodality imaging (CT, MRI, CBCT, PET/CT). Standardized preprocessing is crucial for consistent radiomic feature extraction. Key preprocessing steps include voxel resampling, normalization, and discretization, which influence feature robustness and reproducibility. From our work, we highlighted the need to harmonize the use of preprocessing parameters and their values, especially in light of future studies of prospective studies, which are still lacking in the current literature.

In a dual-inertia system based on permanent magnet synchronous motor (PMSM), the elastic transmission mechanism, such as reducer and coupling, is prone to mechanical resonance, which reduces the precision of servo system transmission. Model prediction and introduction of state feedback are effective methods to suppress mechanical resonance, but the control parameters de-pend on the mechanical parameters of the system. Therefore, mechanical parameter identification is very necessary. In this paper, a forgetting factor recursive least square method is used to identify the mechanical parameters of the dual-inertia elastic system. Firstly, the mathematical model of the dual-inertia system is established and reasonably simplified. Then, the discrete function of the identification algorithm is constructed, and the motor speed and electromagnetic torque are sam-pled to achieve the on-line identification of the main mechanical parameters of the dual-inertia system, and the influencing factors of the identification accuracy are analyzed. Finally, simulations and experiments are carried out to verify the effectiveness of the algorithm.

Abstract: Rationale. Object tracking has significance in many applications ranging from control of unmanned vehicles to autonomous monitoring of specific situations and events, especially when providing safety for patients with certain adverse conditions such as epileptic seizures. Conventional tracking methods face many challenges, such as the need for dedicated attached devices or tags, influence by high image noise, complex object movements, and intensive com-putational requirements. We have developed earlier computationally efficient algorithms for global optical flow reconstruction of group velocities that provide means for convulsive seizure detection and have potential applications in fall and apnea detection. Here, we address the chal-lenge of using the same calculated group velocities for object tracking in parallel. Methods. We propose a novel optical flow-based method for object tracking. It utilizes real-time image se-quences from the camera and directly reconstructs global motion-group parameters of the con-tent. These parameters can steer a rectangular region of interest surrounding the moving object to follow the target. The method successfully applies to multi-spectral data, further improving its effectiveness. Results. Experimental results on simulated tests and complex real-world data demonstrate the method's capabilities. The proposed optical flow reconstruction can provide accurate, robust, and faster results compared to current state-of-the-art approaches.

. In this work, two types of nanoporous alumina membranes were prepared using different acids and were tested. Structural features of the samples were investigated by scanning electron spectroscopy and further by different types of fractal dimension estimation methods. Transmission and scattering of accelerated He+ ions were studied in experiments on ion irradiation of dielectric channels based on porous alumina. Ion accelerator was used as a source of the He+ beam with an energy of 1.7 MeV. A scattering of ions was studied by Rutherford backscattering spectrometry. Helium transition through nanoporous alumina at various angles between the normal to the sample and the beam direction were observed. It is shown that the porous structure of anodic aluminum oxide is excellent as a dielectric matrix of nanocapillaries. Owing to the small angle scattering, it allows the transportation of the accelerated charged particles through the dielectric capillaries, and, as a result, localization of high energy ion irradiation effects. Additionally, according to the transmission UV-Vis spectra the energy gaps of samples obtained were calculated.

Several life contingency agreements are based on the assumption that policyholders have impaired life expectancy attributable to factors such as lifestyle, social class, or preexisting health issues. Quantifying two crucial variables, augmented death probabilities and the discount rate of projected cash flows, is essential for pricing such agreements. Information regarding the correct values of these parameters is subject to vagueness and imprecision, which further intensifies if impairments must be considered. This study proposes modelling mortality and interest rates using a generalization of fuzzy numbers (FNs), known as intuitionistic fuzzy numbers (IFNs). Consequently, this paper extends the literature on life contingency pricing with fuzzy parameters, where uncertainty in variables, such as interest rates and death probabilities, is modelled using FNs. While FNs introduce epistemic uncertainty, the use of IFNs adds bipolarity to the analysis by incorporating both positive and negative information regarding actuarial variables. Our analysis focuses on two agreements involving policyholders with impaired life expectancy: determining the annuity payment in a substandard annuity and pricing a life settlement over a whole life insurance policy. In particular, we emphasize modelling interest rates and survival probabilities using triangular intuitionistic fuzzy numbers (TIFNs) owing to their ease of interpretation and implementation.

This paper aims to contribute to refining the e-values for testing precise hypotheses, especially when dealing with nuisance parameters, leveraging the effectiveness of asymptotic expansions of the posterior. The proposed approach offers the advantage of bypassing the need for elicitation of priors and reference functions for the nuisance parameters and the multidimensional integration step. For this purpose, starting from a Laplace approximation, a posterior distribution for the parameter of interest only is considered and then a suitable objective matching prior is introduced, ensuring that the posterior mode aligns with an equivariant frequentist estimator. Consequently, both Highest Probability Density credible sets and the e-value remain invariant. Some targeted and challenging examples are discussed.

Wastewater (WW) analysis is a critical step in various operations such as control of a WW treatment facility, and speeding-up the analysis of WW quality can significantly improve such operations. This work demonstrates the capability of neural network (NN) regression models to estimate WW characteristic properties such as biochemical oxygen demand (BOD), chemical oxygen demand (COD), ammonia (NH3-N), total dissolved substances (TDS), total alkalinity (TA), and total hardness (TH) by training on WW spectral reflectance in the visible to near-infrared spectrum (400nm-2000nm). The dataset contains samples of spectral reflectance intensity, which were the inputs, and the WW parameter levels (BOD, COD, NH3-N, TDS, TA, and TH), which were the outputs. Various NN model configurations were evaluated in terms of regression model fitness. The mean-absolute-error (MAE) was used as the metric for training and testing the NN models, and the coefficient of determination (R2) between the model predictions and true values was also computed to measure how well the NN models predict the true values. With online spectral measurements, the trained neural network model can provide non-contact and real-time estimation of WW quality at minimum estimation error.

In this study, the application of the main algorithms used for SDM, namely Boosted Regression Tree (BRT), Generalized Linear Model (GLM), Multivariate Adaptive Regression Splines (MARS), Maximum Entropy (MAXENT) and Random Forest (RF), were considered in order to simulate the citrus probability of distribution in a Mediterranean area, based on presence data and a random background sample, and in relation to several predictors. The predictors were grouped under 19 bioclimatic variables, elevation described through a Digital terrain model, soil physical properties, and irrigation. Sensitivity analysis was carried out by: modifying the values of the main models’ parameters; and reducing the input presence points.

In this study, based on our previous study, we examined the mathematical properties, especially the stability of the equilibrium for our proposed mathematical model. By means of the results of the stability in this study, we also used actual data representing transient booms and resurgent booms, and conducted parameter estimation for our proposed model using Bayesian inference. In addition, we conducted a model fitting to five actual data. By this study, we reconfirmed that we can express the resurgences or minute vibrations of actual data by means of our proposed model.

This paper investigates the inverse option problems (IOP) in the extended Black--Scholes model arising in financial markets. We identify the volatility and the drift coefficient from the measured data in financial markets using a Bayesian inference approach, which is presented as an IOP solution. The posterior probability density function of the parameters is computed from the measured data. The statistics of the unknown parameters are estimated by a Markov Chain Monte Carlo (MCMC) algorithm, which exploits the posterior state space. The efficient sampling strategy of the MCMC algorithm enables us to solve inverse problems by the Bayesian inference technique. Our numerical results indicate that the Bayesian inference approach can simultaneously estimate the unknown trend and volatility coefficients from the measured data.

Current study aims to evaluate the possibilities to increase part strength by optimizing the FFF process parameters. Five different CAD models of parts with same coupling dimensions but different shape inherited from a recent study were converted into test samples with Ultimaker 2 3D printer. The main measure of success was the sample strength, defined as the load at which the first crack in the stressed area of the part appeared. Three different modifications to the FFF process with verified positive effect on interlayer bonding were applied. First modification included raising the extrusion temperature and disabling printed part cooling. Second modification consisted in reduction of the layer thickness. Third modification combined the effects of the first and the second ones. For four out of five shapes tested applied process modifications resulted in significant strengthening of the part. The shape that exhibited the best results was subject to further research by creating special printing mode. The mode included fine-tuning of three technological parameters on different stages of the part fabrication. As result it was possible to increase the part strength by 108% only by tuning printing parameters of the best shape designed with increasing its weight by 8%.

This study was conducted with the objective of investigating the enrichment of weaned piglet diets with organic selenium (proteinate selenium) and inorganic selenium (sodium selenite) with two addition levels (0.15 and 0.30 mg/kg). A total of 40 piglets (20 castrated males and 20 females) weaned at 28 days of age with an average initial weight of 6.60±1.06 kg were used. The treatments were: Control diet (Control diet); Selenium-enriched control diet proteinate with 0.15 mg/kg of selenium added (SeOrg-0.15); Selenium-enriched control diet proteinate with 0.30 mg/kg of selenium added (SeOrg-0.30); Control diet enriched with sodium selenite with 0.15 mg/kg of selenium added (SeInorg-0.15); and Control diet enriched with sodium selenite with 0.30 mg/kg of selenium added (SeInorg-0.30). The presence of selenium in the control diet came from the ingredients and the mineral supplement. The following data were analyzed: productive performance; digestibility of nutrients and energy; morphometry and intestinal integrity; serum biochemical parameters; and gene expression of selenoproteins in intestinal epithelium and liver tissue of piglets. The SeOrg-0.30 treatment caused a reduction (P

Gelidium jelly was traditionally made by boiling processed Gelidium seaweed and allowing the filtrate to congeal into jelly. The processing of Gelidium seaweed was very complicate involved the repeated procedures of water washing and sun drying for 7 times, and the seaweed was originally purple-red in color turned into yellow after the repeated wash and sun drying. This study aimed to evaluate the effects of halogen lamp drying methods in replace of sun drying on the physical-chemical qualities of Gelidium jellies. Properties included the agar yield, gelling temperature, hardness, springiness, rheological parameters, sensory attributes, color, and volatile compounds were investigated. The results demonstrated halogen lamp drying method required 12 times of washing and drying processes to achieve the similar jelly properties compared to sun drying for 7 times in the experimental conditions. Volatiles including heptanal, β-ionone, and (E)-2-decenal could be used as indicators to monitor the washing and drying processing. Halogen lamp was found could be an alternative processing method for seaweed drying, especially at rainy days.

Determining genetic and non-genetic sources of variation in a breed is vital for the formulation of strategies for its conservation and improvement. The present study was aimed at estimating the (co)variance components and genetic parameters of Mecheri sheep by fitting six different animal models in the restricted maximum likelihood method, with a preliminary investigation on the performance of animals for non-genetic sources of variation. A total of 2616 lambs were studied, and varying levels of significance were found for the effect of period, season, parity of dam and birth type on different body weight traits. Direct heritability estimates derived from the best animal model for body weight at birth, 3 months, 6 months, 9 months and 12 months were 0.21, 0.24, 0.10, 0.15 and 0.09, respectively, and maternal heritabilities of the corresponding traits were 0.12, 0.05, 0.04, 0.04 and 0.04, respectively. The genetic correlations between body weight traits were all positive and moderate to strong except for birth weight with the other body weight traits. The significance of non-genetic factors studied in this work demanded a correction to improve the accuracy of the direct selection of lambs for body weight traits. The estimated genetic parameters identified the weaning weight as a selection criterion for the improvement in body weight of Mecheri lambs at different ages. Inbred individuals accounted for approximately 13% of the total population in the Mecheri sheep population studied. There were 877 founders in the population, and the actual effective size of the population was 128.48. The population's mean generation interval was 3.26. The mean inbreeding values ranged from 0.005 to 0.010 across generations. The population's average relatedness ranged from 0.001 to 0.014 across generations. Individual inbreeding was found to be 0.45 per cent for the entire population and 3.4 per cent for the inbred population.

Circadian rhythms misalignment is associated with hypertension. The aim of the study was to evaluate the concentration of selected clock proteins- cryptochrome 1 (CRY1) and circadian locomotor output cycles kaput (CLOCK) and to determine their relationships with biochemical and anthropometric parameters and lifestyle elements (diet, physical activity, quality of sleep) in hypertensive patients. In 25 female with hypertension (HT) and 49 non-hypertensive women (NHT), the CRY1 and CLOCK concentrations, total antioxidant status (TAS), lipid profile and glycemia were conducted. Blood pressure and anthropometric measurements, nutritional, exercise and sleep analyses were performed. In HT the CRY1 level was 40.2% lower than in the NHT. No differences were noted in CLOCK concentration between groups. The study showed no relationship between CRY1 or CLOCK concentrations and glucose or lipids profile, amount of physical activity and sleep quality, although CRY1 was associated with some anthropometric parameters. There was a negative correlation between the CLOCK concentration and the amount of saturated fatty acids consumed (24h) in HT. That indicates the possible influence of the diet on the CLOCK level. In a detailed prognosis of the risk of hypertension, it is worth considering the measurement of the level of CRY1 in populations with abnormal anthropometric indices.

The incorporation of plastic matrix composite materials into structural elements of the aeronautical industry requires contour machining and drilling processes along with metallic materials prior to final assembly operations. These operations are usually performed using conventional techniques, but they present problems derived from the nature of each material that avoid implementing One Shot Drilling strategies that work separately. In this work, the study focuses on the evaluation of the feasibility of Abrasive Waterjet Machining (AWJM) as a substitute for conventional drilling for stacks formed of Carbon Fiber Reinforced Plastic (CFRP) and aluminum alloy UNS A97050 through the study of the influence of abrasive mass flow rate, traverse feed rate and water pressure in straight cuts and drills. For the evaluation of the straight cuts, Stereoscopic Optical Microscopy (SOM) and Scanning Electron Microscopy (SEM) techniques are used inspection techniques have been used. In addition, the kerf taper through the proposal of a new method and the surface quality in different cutting regions have been evaluated. For the study of holes, the macrogeometric deviations of roundness, cylindricity and straightness have been evaluated. Thus, this experimental procedure reveals the conditions that minimize deviations, defects, and damage in straight cuts and holes obtained by AWJM.

The article presents the results of the technical-economical study regarding the optimization of the FDM parameters (Lh – the height of the layer deposited in one pass and Id – the filling percentage) for the manufacture of PETG and ASA parts. To carry out the technical-economical study, we used the fundamental principle of value analysis, which consists in maximizing the ratio between Vi/Cp, where Vi - represents the mechanical characteristic, and Cp - represents the production cost. The results of the study show that for the tensile specimens made of PETG, the parameter that significantly influences the results of the Vi/Cp ratios is Lh, and in the case of the compression specimens made of PETG, the parameter that significantly influences the results of the Vi/Cp ratios is Id. In the case of specimens manufactured by FDM from ASA, the parameter that decisively influences the results of the Vi/Cp ratios of the tensile and compression specimens is Id – the filling percentage. By performing optimization of the process parameters with multiple responses, we identified the optimal parameters for FDM manufacturing of parts from PETG and ASA: Lh = 0.20 mm and Id = 100%.

This paper presents a new optimization algorithm to control the voltage of power system generators by the simultaneous tuning of the parameters of Automatic Voltage Regulator (AVR) and Power System Stabilizer (PSS) using a new technique called Particle Swarm Optimization with Periodic Oscillating Exponential Decay (PSO - POED). The proposed algorithm was applied to both the Single-Machine Infinite-Bus (SMIB) Power System and the 9-Bus Multi-Machine Power System. The results of the simulation show that the proposed method is efficient and guarantees an improvement in the dynamic stability and convergence rate of the simulations.

We propose a method that enables precise determination of the number of atoms in a Dick-noise-free optical lattice clock, by effectively addressing quantum projection noise. Our approach relies on conducting stability measurements at three distinct parameter sets, allowing us to differentiate between quantum projection noise, photon shot noise, and technical noise. Importantly, our method enables accurate extraction of the atom number, even in the presence of photon shot noise and technical noise. To validate the effectiveness of our approach, we employ numerical simulations and optimize the modulation parameters to achieve the smallest uncertainty possible. The numerical simulations show the validity of our method and demonstrate a measurement uncertainty in the atom number that is below 4% across a wide range of atom numbers, provided that the standard deviation of atom number fluctuation is kept below 0.23 times the average atom number.

Background: Myocardial infarction is increasing at a young age. New tools are needed to evaluate the risk population of young patients. GDF-15 has been implicated in several key mechanisms of atherogenesis and also is associated with increased mortality and cardiovascular events in patients with coronary artery disease. Arterial stiffness parameters, including pulse wave velocity, can also be measured using peripheral arterial tonometry and can indicate the presence or progression of atherosclerotic changes. The aim of this study is to evaluate the GDF-15 level and arterial stiffness parameters in patients with premature myocardial infarction Method: Thirty patients who recovered from a myocardial infarction were consecutively included. Fifteen age-sex-matched subjects were included as controls. The patients’ serum GDF-15 concentration levels were measured using relevant kits. Measurements of arterial stiffness [pulse-wave velocity (PWV) and augmentation index (AIx)] were performed using a Mobil-O-Graph arteriography system. Results: GDF-15 concentration levels were significantly higher in the patients with premature myocardial infarction when compared to controls. PWV and AIx were similar between the groups. GDF-15 level was negatively correlated with high-density cholesterol (HDL) and positively correlated with uric acid levels in all study populations. Conclusions: GDF-15 levels may be a risk factor for patients with premature myocardial infarction. This pilot study may trigger further studies to elucidate the central role of GDF-15 in the pathophysiology of early atherosclerosis in the young population.

In this study, we investigate the existence of positive solutions within a system of Riemann-Liouville fractional differential equations that incorporate the (r1,r2,r3)-Laplacian operator while being subject to three-point boundary conditions. These equations incorporate various fractional derivatives and are influenced by parameters represented as (ψ1,ψ2,ψ3). Our approach involves employing techniques such as cone expansion and compression of the functional type, in conjunction with the Leggett-Williams fixed point theorem, to establish the existence of positive solutions. To emphasize the practical significance of our findings in the realm of fractional differential equations, we provide two illustrative examples.

The growth of plant and process of yield formation in crops are moderated by surrounding conditions as well as interaction of genetic background of plants and environment. In the last two decades significant changes in climate can be observed generating unfavorable and harmful impact on plant development. Drought stress can be considered as one of the most dangerous environmental factor influencing plant life cycle and decreasing production of biomass and finally the yield. Plants can react to water deficit in a wide degree what is dependent on the species, the genetic variability within the species, the phase of the plant ontogenesis, the intensity of stress, and other potential stress factors. In plants there can be observed hybrids between distinct taxa which exhibit certain traits adopted to tolerate stress conditions better than parental plants. Oat × maize addition (OMA) plants are good example of fertile hybrids with retained maize chromosomes as addition to complete oat genome. Hybrids generated via wide crossing can exhibit morphological, physiological and biochemical variations implemented by the occurrence of extra chromosomes of maize, as well as interaction of maize and oat chromatin. The molecular analysis indicated 12.5% OMA lines among all tested descendants of wide oat-maize crossing. On the fourteenth day of the drought, a significant effect of stress on the content of soluble sugars and phenolic compounds was observed, soil drought significantly reduced plant biomass above ground and several yield components. Less water lost revealed by results of the excised leaf water loss test was correlated with high yield of OMA lines. Phenolic compounds content might be used as biochemical indicator of plant drought tolerance since there were significant correlation with high kernel yields of plants subjected to drought stress.

Solar photovoltaic systems are becoming increasingly popular due to their outstanding environmental, economic, and technical characteristics. To simulate, manage, and control photovoltaic (PV) systems, the primary challenge is identifying unknown parameters accurately and reliably as early as possible using a robust optimization algorithm. This paper proposes a newly developed cheetah optimizer (CO) and improved CO (ICO) to extract parameters from various PV models. This algorithm, inspired by cheetah hunting behavior, includes several basic strategies: searching, sitting, waiting, and attacking. Although this algorithm has shown remarkable capabilities in solving large-scale problems, it needs improvement concerning its convergence speed and computing time. Here, an improved CO (ICO) is presented to identify solar power model parameters for this purpose. Single-, double-, and PV module models are investigated to test ICO's parameter estimation performance. Statistical analysis uses minimum, mean, maximum, and standard deviation. Furthermore, to improve confidence in test results, Wilcoxon and Freidman rank nonparametric tests are also performed. Compared to other state-of-the-art optimization algorithms, the ICO algorithm is proven to be highly reliable and accurate when identifying PV parameters.

Using a database of 378 hail days between 20981 and 2020, the climatic characteristics of 23 convective parameters from sounding data and ERA5 data were statistically analyzed. The goal of this work is to evaluate the usefulness and representativeness of convective parameters derived from sounding data and reanalysis data for the operational forecast of the hail phenomenon. As a result, average values from 12:00 UTC were 433J / Kg for CAPE in the case of data from ERA5 and 505 J/kg from rawinsonde respectively. The Spearman correlation coefficients matrix between the values of the parameters indicates high correlations between the parameters calculated based on the parcel theory, the humidity indices, and the complex indices. The probability for large hail maximizes with high low level and boundary layer moisture, high CAPE, and a high lifted condensation level height.

Data-driven models based on artificial intelligence are efficiently used to solve complex problems. The quality of groundwater is of utmost importance, as it directly impacts human health and the environment. In major parts of the world groundwater is the main source of drinking water, it is essential to periodically monitor water quality. Conventional water quality monitoring techniques involve periodical collection of water samples and analysis in the laboratory. This process is expensive, time consuming and involves lot of manual labor. The aim of our study is to build an ant colony optimized neural network for predicting groundwater quality parameters. We have proposed artificial neural network comprising of six hidden layers. The approach was validated using our groundwater quality dataset of a hard rock region in the northern part of Karnataka, India. Groundwater samples were collected by us periodically from March 2014 to October 2020 from 50 wells in this region. These samples where analysed for measuring the pH, Electrical Conductivity, Na+, Ca+, Na+, K+, Mg2+, F-, Cl- and U+. The temporal dataset was split for training, testing and validation of our model. Metrics such as R2 (Coefficient of Determination), RMSE (Root Mean Squared Error), NSE (Nash–Sutcliffe efficiencies) and MAE (Mean Absolute Error) were used to evaluate the prediction error and model performance. These performance evaluation metrics indicated the efficiency of our model in predicting the temporal variation in groundwater quality parameters. The method proposed by us can be used for prediction and the temporal frequency of sample collection can be reduced to save time and cost. The results also confirm that the combination of artificial neural network with ACO is a promising tool to optimize weights while training the network, and hence will help in reasonable prediction of groundwater quality parameters.

We make use of generalized iterations of the Sacks forcing to define cardinal-preserving generic extensions of the constructible universe L in which the axioms of ZF hold and in addition either 1) the parameter-free countable axiom of choice AC* fails, or 2) AC* holds but the full countable axiom of choice AC fails in the domain of reals. In another generic extension of L, we define a set X⊆P(ω), which is a model of the parameter-free part PA2* of the 2nd order Peano arithmetic PA2, in which CA(Σ21) (Comprehension for Σ21 formulas with parameters) holds, yet an instance of Comprehension CA for a more complex formula fails. Treating the iterated Sacks forcing as a class forcing over $L_{\omega_1}$, we infer the following consistency results as corollaries. If the 2nd order Peano arithmetic PA2 is formally consistent then so are the theories: 1) PA2 + negation of AC*, 2) PA2 + AC* + negation of AC, 3) PA2* + CA(Σ21) + negation of CA.

There is a potential for synergy effects in utilizing CO2 for both enhanced gas recovery (EGR) and geothermal energy extraction (CO2-plume geothermal, CPG) from natural gas reservoirs. This “combined CO2-EGR–CPG system” has been introduced as a feasible approach that constitutes a CO2 Capture double-Utilization and Storage (CCUUS) system. In this study, we carry out reservoir simulations, using TOUGH2, to evaluate the sensitivity of the natural gas recovery, pressure buildup, and geothermal power generation performance of the combined system to various key reservoir and operational parameters. The reservoir parameters include horizontal permeability, permeability anisotropy, reservoir temperature, and pore-size-distribution index; while the operational parameters include wellbore diameter and ambient surface temperature. Using an example of a natural gas reservoir model, we also investigate the effects of different strategies of transitioning from the CO2-EGR stage to the CPG stage on the energy-recovery performance metrics and on the two-phase fluid-flow regime in the production well. The simulation results show that overlapping the CO2-EGR and CPG stages and having a relatively brief period of CO2 injection but no production (which we call the CO2-plume establishment stage) achieves the best overall energy (natural gas and geothermal) recovery performance. Permeability anisotropy and reservoir temperature are the parameters the natural gas recovery performance of the combined system is most sensitive to. The geothermal power generation performance is most sensitive to the reservoir temperature and the production wellbore diameter. The results of this study pave the way for future CPG-based geothermal power-generation optimization studies. For a CO2-EGR–CPG project, the results can be a guide regarding the required accuracy of the reservoir parameters during exploration and data acquisition.

Taking a typical forest underlying surface as the research area, this study employed the unmanned aerial vehicle (UAV) photogrammetry to explore more accurate canopy parameters including tree height and canopy radius, which were used to improve the Noah-MP land surface model conducted in Dinghushan Forest Ecosystem Research Station (CN-Din). While the canopy radius was fitted as a Burr distribution, the canopy height of CN-Din forest followed a Weibull distribution. The replacement of the parameters by these observed UAV would result in the Noah-MP model. It was found that the influence on the simulation of the energy fluxes could not be negligible, and the main influence of these canopy parameters was on the latent heat flux which could decrease up to -11% in the midday while increase up to 15% in the nighttime. Additionally, this work indicated that the description of the canopy characteristics for the land surface model should be improved to accurately deliver the heterogeneity for the underlying surface.

Objective: Rheumatoid Arthritis (RA) is a chronic inflammatory disease affecting the synovium and articular cartilage that initiates joint damage. RA associates with a change in many inflammatory biomarkers. The present study aims to measure the levels of inflammatory adipocytokines (chemerin and visfatin) and their ratio in addition to some related biomarkers in RA patients group in comparison to healthy control group and find out their efficacy in diagnosis of RA.Methods: The study included 60 RA patients and 30 healthy control group. Serum visfatin and chemerin were measured by using ELISA technique, while other biomarkers were determined spectrophotometrically. Multivariate general linear model analysis and Receiver operating curve was used to study the opportunity of using chemerin and visfatin as diagnostic tools for RA.Results: The results indicated that there was a significant increase (p<0.05) in all lipid profile components, except HDLc that decreased, in RA patients in comparison with healthy control group; while significant decrease (p<0.001) in high density lipoprotein-cholesterol of RA patients in comparison with control group. Serum chemerin, visfatin, C-reactive protein, and uric acid levels were significantly higher (p<0.05) in RA patients than those of control group. The results showed a relatively good sensitivity and specificity of chemerin (sensitivity=88.1, specificity=75.9) at a concentration=187.88ng in diagnosis of RA.Conclusions: chemerin is able to diagnose RA efficiently but this diagnoses, due to relatively small specificity, may interfere with other inflammatory disorders. However, with adjuvant with other diagnostic parameters, chemerin may represent a useful addition in diagnosis of RA.

Digital Elevation Models (DEMs) are essential in watershed delineation, but the sensitivity of simulated runoff to DEM resolution is poorly understood. This study investigates the impact of DEM resolution on topological attributes and simulated runoff in the Mahabad Dam watershed, Iran. To delineate the watershed, DEMs with 12.5 m, 30 m, and 90 m resolutions were acquired from the ALOS PALSAR, Space Shuttle Radar Topography Mission (SRTM), and ASTER global DEM data source, respectively. Watershed and streamlines were delineated in ArcGIS, with hydrologic analyses performed using the Soil and Water Assessment Tool (SWAT). Sensitivity analysis on parameters contributing to runoff was done using Sequential Uncertainties Fitting Ver-2 (SUFI-2) Algorithm, in SWAT Calibration and Uncertainty Procedures (SWAT-CUP) software. Results showed the watershed area, reach lengths, and elevations in the watershed varied due to DEM resolutions. Higher amounts of runoff were generated when DEMs with finer resolutions were implemented. The 12.5 m DEM generated 3.48% and 0.42% more runoff compared with 90 m and 30 m DEMs, respectively. SWAT-CUP results showed the sensitivity of parameters contributing to runoff changes under different DEM resolutions. Regardless of DEM resolution, surface properties, available water capacity, and moisture levels in the soil are the most sensitive parameters. As the distribution of slope changes in different DEM resolutions, surface parameters are most affected. The findings indicate to reduce computation time and speed up computation procedures, researchers may use DEMs with coarser resolutions at the expense of minor decreases in accuracy.

The Microwave Humidity and Temperature sounder (MWHTS) on board the Fengyun (FY)-3C satellite measure the outgoing radiance form the Earth surface and atmospheric constituents. MWHTS makes measurements in the isolated oxygen absorption line near 118 GHz and the vicinity of strong water vapor line around 183 GHz, can provide fine vertical distribution structure of both atmospheric humidity and temperature. However, in order to obtain the accurate soundings of humidity and temperature by the physical retrieval method, bias between the observed radiance and those simulated by radiative transfer model from the background or first guess profiles must be correct. In this study, two bias correction methods are developed through the correlation analysis between MWHTS measurements and air mass identified by the first guess profiles of the physical inversion, one is the linear regression correction (LRC) and the other is neural networks correction (NNC), representing the linear and nonlinear nature between MWHTS measurements and air mass, respectively. Both correction methods have been applied to MWHTS observed brightness temperatures over the geographic area (180° W-180° E, 60° S-60° N). The corrected results are evaluated by the probability density function of the difference between corrected observations and simulated values and the root mean square error (RMSE) with respect to simulated observations. The numerical results show that the NNC method perform better, especially in MWHTS channels 1 and 7-9 whose peak weight function heights are close to the surface. In order to assess the effects of bias correction methods proposed in this study on the retrieval accuracy, a one-dimensional variational system was built and applied to the MWHTS uncorrected and corrected brightness temperatures to estimated atmospheric temperature and humidity profiles, The retrieval results show that the NNC has better performance which is to be expected. An indication of the stability and robustness of NNC method is given which suggests that the NNC method has promising application perspectives in the physical retrieval.

In the last decades farm animals kept in confined and mechanically ventilated livestock buildings are increasingly confronted with heat stress (HS) due to global warming. These adverse conditions cause a depression of animal health and welfare and a reduction of the performance up to an increase of the mortality. To facilitate sound management decisions, livestock farmers need relevant arguments, which quantify the expected economic risk and the corresponding uncertainty. The economic risk was determined for the pig fattening sector based on the probability of HS and the calculated decrease in the gross margin. The model calculation for confined livestock buildings showed, that HS indices calculated by easily available meteorological parameters can be used for assessment quantification of indoor HS, which is so far difficult to determine. These weather-related HS indices can be applied not only for an economic risk assessment but also for a weather-index based insurance for livestock farms. Based on the temporal trend between 1981 and 2017, a simple model was derived to assess the likelihood of HS for 2020 and 2030. Due to global warming, the return period for a 90-percentile HS index is reduced from 10 years in 2020 to 3-4 years in 2030. The economic impact of HS on livestock farms was calculated by the relationship between an HS index based on the temperature-humidity index (THI) and the reduction of the gross margin. From the likelihood of the HS and this economic impact function, the probability of the economic risk could be determined. The reduction of the gross margin for a 10 year return period was determined for 1980 with 0.27 € per year and animal place and increased by the 20-fold to 5.13 € per year and animal place in 2030.

Reading is one of the essential processes during the maturation of an individual. It is estimated that 5-10% of school-age children are affected by dyslexia, the reading disorder characterised by difficulties in the accuracy or fluency of word recognition. There are many studies which have reported that colour overlays and background could improve the reading process, especially in children with reading disorders. As dyslexia has neurobiological origins, the aim of the present research was to understand the relationship between physiological parameters and colour modifications in the text and background during reading in children with and without dyslexia. We have measured differences in electroencephalography (EEG), heart rate variability (HRV), electrodermal activities (EDA), and eye movement of the 36 school-age children (18 with dyslexia and 18 of control group) during the reading performance in 13 combinations of background and overlay colours during the reading task. Our findings showed that the dyslexic children have longer reading duration, fixation count, fixation duration average, fixation duration total, and longer saccade count, saccade duration total, and saccade duration average while reading on white and coloured background/overlay. It was found that the turquoise, turquoise O, and yellow colours are beneficial for dyslexic readers, as they achieved the shortest time duration during the reading tasks when these colours were used. Also, dyslexic children have higher values of beta and the whole range of EEG while reading in particular colour (purple), as well as increasing theta range while reading on the purple overlay colour. We have observed no significant differences between HRV parameters on white colour, except for single colours (purple, turquoise overlay and yellow overlay) where the control group showed higher values for Mean HR, while dyslexic children scored higher with Mean RR. Regarding EDA measure we have found systematically lower values in children with dyslexia in comparison to the control group. Based on present results we can conclude that both colours (warm and cold background/overlays) are beneficial for both groups of readers and all sensor modalities could be used to better understand the neurophysiological origins in dyslexic children.

Multi- and hyper-spectral, multi-angular top-of-canopy reflectance data call for an efficient retrieval system which can improve the retrieval of standard canopy parameters (as albedo, LAI, fAPAR), and exploit the information to retrieve additional parameters (e.g. leaf pigments). Furthermore consistency between the retrieved parameters and quantification of uncertainties are required for many applications. % (2) methods We present a retrieval system for canopy and sub-canopy parameters (OptiSAIL), which is based on a model comprising SAIL, PROSPECT-D (leaf properties), TARTES (snow properties), a soil model (BRDF, moisture), and a cloud contamination model. The inversion is gradient based and uses codes % created by Automatic Differentiation. The full per pixel covariance-matrix of the retrieved parameters is computed. For this demonstration, single observation data from the Sentinel-3 SY_2_SYN (synergy) product is used. The results are compared with the MODIS 4-day LAI/fPAR product and PhenoCam site photography. OptiSAIL produces generally consistent and credible results, at least matching the quality of the technically quite different MODIS product. For most of the sites, the PhenoCam images support the OptiSAIL retrievals. The system is computationally efficient with a rate of 150 pixel per second (7 millisecond per pixel) for a single thread on a current desktop CPU using observations on 26 bands. Not all of the model parameters are well determined in all situations. Significant correlations between the parameters are found, which can change sign and magnitude over time. OptiSAIL appears to meet the design goals, puts real-time processing with this kind of system into reach, seamlessly extends to hyper-spectral and multi-sensor retrievals, and promises to be a good platform for sensitivity studies. The incorporated cloud and snow detection adds to the robustness of the system.

With the aim to investigate the effect of parameter and quenching process on the joint of hot stamping steel by laser welding, the BR1500HS boron steel was welded by filling-wire laser welding with ER70-G welding wire under different parameters. The welded specimens were heated to 900℃ and held for 5min before water quenching. The universal material test machine, Optical micro-scope, Vickers hardness tester, scanning electron microscope and electron backscatter diffraction (EBSD) were used to characterize. The results showed that the macroscopic morphology of fusion zone (FZ) becomes from funnelform to hyperbolic curve shape when heat input increases and from hyperbolic curve shape to funnelform when wire-feed speed increases. The strength after quenching is more than 1557Mpa at heat input of 1040J/cm, wire feeding speed of 1.6m/min~1.8m/min and welding speed of 1.5m/min. EBSD test showed that the FZ and fine grain zone (FGZ) have more retained austenite (RA) than coarse grain zone (CGZ) before quenching and RA in FZ and heat affect zone (HAZ) decreased and distributed uniformed after quenching. The grain diameter in FZ distribute unevenly, with the maximum grain diameter larger than 40μm before quenching. After quenching, the grain diameter of FZ, HAZ and BM is more even and coarse grains in the FZ was refined. Before quenching, the microhardness of FZ and HAZ is of 450HV~500HV at different heat input and wire-feed speed and all region of joint keeps at 450HV~550HV after quenching. Most dimple and little river pattern in the joint fracture mor-phology before quenching indicates a well plasticity and most cleavage facet is observed after quenching due to the joint combine with martensite.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

The angiotensin-converting enzyme (ACE) is a peptidase that is involved in the synthesis of Angiotensin II, the bioactive component of the renin-angiotensin system. A growing body of literature argues for a beneficial impact of ACE inhibitors (ACEi) on age-associated metabolic disorders, mediated by cellular changes in reactive oxygen species (ROS) that improve mitochondrial function. Yet, our understanding of the relationship between ACEi therapy and metabolic parameters is limited. Here, we used three genetically diverse strains of Drosophila melanogaster to show that Lisinopril treatment reduces thoracic ROS levels and mitochondrial respiration in young flies, and increases mitochondrial content in middle-aged flies. Using untargeted metabolomics analysis, we also showed that Lisinopril perturbs the thoracic metabolic network structure by affecting metabolic pathways involved in glycogen degradation, glycolysis, and mevalonate metabolism. The Lisinopril-induced effects on mitochondrial and metabolic parameters, however, are genotype-specific and likely reflect the drug’s impact on nutrient-dependent fitness traits. Accordingly, we found that Lisinopril negatively affects survival under nutrient starvation, an effect that can be blunted by genotype and age in a manner that partially mirrors the drug-induced changes in mitochondrial respiration. In conclusion, our results provide novel and important insights into the role of ACEi in cellular metabolism.

In recent years, Atherosclerotic Cardiovascular Disease (ACVD), Obesity and Diabetes, have increase exponentially worldwide. In the present work, we evaluate the genoprotective effect of consuming a flavonoids-rich chocolate and the improvement in the biochemical parameters related to the prevention and treatment of cardiovascular risk and metabolic syndrome in young Mexican adults. A randomized, placebo-controlled, double-blind study was undertaken in the Autonomous University of Baja California. The treatments were a daily intake of 2 grams of dark chocolate containing 70% cooca or milk chocolate. Total phenolic compounds and flavonoids were evaluated in both chocolates. Anthropometrical and Biochemical parameters were measured in the 84 participants before and after the study. Buccal epithelial genotoxicity was also evaluated from the beginning to the end of the experiment in the participants. Result suggested that flavonoids of cocoa intake have protective effects against DNA damage, and Biochemical parameters (total cholesterol, triglycerides, and LDL-cholesterol level in blood) and anthropometrical parameters (waist circumference) were also improved after six months of daily intake of 2 grams of dark chocolate with a 70% of cocoa.

Additive Manufacturing (AM) plays a vital role in rapid prototyping. Polylactic acid (PLA), a biomass thermoplastic monomer made from corn starch is the most used filament material in AM. Due to the strength requirement of haptic device prototypes, there is a need to carefully explore all parameters that could enhance the performance of printed parts. This study considered three printing parameters: printing speed, infill density, and layer thickness on three levels each. A tensile test according to ASTM D638 was performed on each. Statistical analysis was done to investigate the influence of each of the parameters on maximum tensile stress, load at maximum tensile stress, and Modulus respectively for each sample. Subsequently, a regression analysis was performed. The sample with an Infill density of 15%, printing speed of 70mm/s, and 0.1mm layer thickness exhibited the highest tensile strength. However, it was discovered further that the infill density has the highest influence on the mechanical properties of the 3D printed PLA material in tensile testing. The chart of the mechanical properties and the parameter configurations were also presented to assist in selecting printing parameters for desired mechanical properties.

Many previous works have studied gravitational lensing effects from Loop Quantum Gravity. So far, Gravitational lensing effects from Loop Quantum Gravity have only been studied by choosing large quantum parameters much larger than the Planck scale. However, by construction, the quantum parameters of the effective models of Loop Quantum Gravity are usually related to the Planck length and, thus, are extremely small. In this work, by strictly imposing the quantum parameters as initially constructed, we study the true quantum corrections of gravitational lensing effects by five effective black hole models of Loop Quantum Gravity. Our study reveals several interesting results, including the different scales of quantum corrections displayed by each model and the connection between the quantum correction of deflection angles and the quantum correction of the metric. Observables related to the gravitational lensing effect are also obtained for all models in the case of SgrA* and M87*.

Building energy modelling tools play a crucial role in quantifying and comprehending the energy performance of buildings. These tools demand substantial amounts of data, which can be challenging to acquire and are often associated with significant uncertainties. The incorporation of Sensitivity Analysis represents a relevant step towards developing reliable models, as it identifies the most critical parameters that require a meticulous characterization. In this study, a Sensitivity Analysis based on Morris method was conducted to assess the relevance of 14 input parameters affecting thermal loads across four dwelling typologies modelled in EnergyPlus. Different number of Morris trajectories and levels were considered to analyse the impact of the user-defined values of r and p when employing Morris method. Convergence was achieved from r=200 and p=12, which are higher than the typically employed values (r=10 and p=4). Setpoint temperatures, orientation, roof solar absorptivity and roof conductance rank among the most relevant parameters affecting thermal loads, however variations are observed for the four case studies.

Solar energetic particles (SEPs) are bursts of high-energy particles that originate from the Sun and can last for hours or even days. The aim of this study is to understand how the characteristics of energetic particles was affected by the characteristic parameters of corotating interaction regions (CIRs). In particular, the particle intensity distribution with time and space in different CIRs are studied. The propagation and acceleration of particles are described by the focused transport equation (FTE). We used a three-dimensional magnetohydrodynamic (MHD) model to simulate the background field including CIRs. By changing the inner boundary conditions, we constructed CIRs with different solar wind speeds, angles between the polar axis and rotation axis, and the azimuthal widths of the fast streams. Impulsive particles are injected at the inner boundary. We then study the SEPs in different backgrounds. The results show that the CIR widths are related to the solar wind speed, tilt angles, and the azimuthal widths of the fast stream. The acceleration of particles in the reverse and forward compression regions is mainly influenced by the solar wind speed difference and the slow solar wind speed, respectively. Particles with lower energy (sub-MeV) are more sensitive to the parameters of CIRs. Different CIR parameters also greatly affect the spatio-temporal distribution of particle intensities in different ways. These results indicate that, it is crucial to consider the conditions of large-scale structure in interplanetary space when studying or predicting energetic particles. Additionally, our findings provide empirical guidance for forecasting the characteristics of SEPs.

The research paper investigates the synthesis of metal matrix composites (MMCs) through the amalgamation of aluminum and silicon carbide particles, employing a two-step mixing methodology called the stir casting method. Metal matrix composites are materials that enhance the capabilities of a metallic matrix by incorporating another material. This leads to better characteristics such as tensile and shear moduli, fatigue and fracture properties, thermal expansion coefficient, and more. Aluminum-matrix composites are a class of materials that possess distinct characteristics that may be modified by altering factors such as the type of reinforcing material, the amount of reinforcement, and the fabrication technique employed to produce the composite. The concept aims to combine the desirable properties of metals and ceramics by incorporating durable refractory particles into a malleable metal structure. The fabrication process employs the stir casting technique, where reinforcing phases are mechanically stirred into a molten matrix to create cast composites with reinforcement volume percentages of up to 30%. The study utilizes Response Surface Methodology to enhance the mechanical properties of the composites through the optimization of manufacturing parameters, including stirring temperature, time, and speed. The study entails analyzing the correlation between different casting conditions and the resulting changes in hardness and tensile strength.

Treatment wetlands (TWs) are Nature-Based Solutions increasingly used worldwide for wastewater (WW) treatment able to remove mineral and organic pollutants through both physical and biochemical process. Besides the reusable effluent, the TWs produce as main output plant biomass that need to be harvested and disposed at least once a year with significant management costs and TW temporary out of service. This study aims (i) to evaluate the potential of TWs biomass for local energy production and (ii) to understand TW hydraulic conductivity (Ks) effects on the biomass biomethane yield. Specifically, it was addressed by determining the Biochemical Methane Potential of common reed (CR) (Phragmites australis) samples collected at three harvest times from the 10-years-old horizontal subsurface treatment wetland (HSTW) used as a secondary WW treatment system for the IKEA® store located in Catania (Eastern Sicily, Italy). Furthermore, the falling head test was conducted to assess the hydraulic conductivity (Ks) variation in the HSTW, in order to understand the influence on the CR biomethane production. Average methane content values were 130.57 Nm3CH4/tVS (±24.29), 212.70 Nm3CH4/tVS (±50.62) and 72.83 Nm3CH4/tVS (±23.19) in August, September, October 2022, respectively. Ks was correlated with both dry matter (R2 = 0.58) and fiber content (R2 = 0.74) and, consequently, affected the biomethane yield that increased at the Ks increases (R2 = 0.30 in August, R2 = 0.57 in September). In the framework of a circular economy, results showed the successfully possibility of integrating the bioenergy production into TWs. The research could contribute (i) to encourage plant operators to reuse biomass from TWs for local energy production and (ii) to help plant operators to understand Ks effects on the biomass biomethane yield, in order to increase the sustainability of the system and to reduce the maintenance costs.

Advanced methods of treatment are needed to fight the threats of virus-transmitted deseases and pandemics. Often they are based on an improved biophysical understanding of virus replication strategies and processes in their host cells. For instance, an essential component of the replication of the Hepatitis C virus (HCV) proceeds under the influence of non-structural HCV proteins (NSPs) that are anchored to the endoplasmatic reticulum (ER), such as the NS5a protein. The diffusion of NSPs has been studied by in-vitro fluorescence recovery after photobleaching (FRAP) experiments. The diffusive evolution of the concentration field of NSPs on the ER can be described by means of surface partial differential equations (sufPDE). Knodel et al, Viruses 2018, 10, 28 estimated the diffusion coefficient of the NS5a protein by minimizing the discrepancy of an extended set of sufPDE simulations and experimental FRAP time series data. Here, we provide a scaling analysis of the sufPDEs that describe the diffusive evolution of the concentration field of NSPs on the ER. This analysis provides an estimate of the diffusion coefficient that is based only on the ratio of the membrane surface area in the FRAP region and its contour length. The quality of this estimate is explored by comparison to numerical solutions of the sufPDE for a flat geometry and for ten different 3D embedded 2D ER grids that are derived from fluorescence z-stack data of the ER. Finally, we apply the new data analysis to the experimental FRAP time-series data analyzed in our previous paper, and we discuss the opportunities of the new approach.

The optical reflection characteristics of asphalt pavement are an important influencing factor in road lighting design, and the macro and micro textures of asphalt pavement significantly affect its reflection characteristics. To investigate the impact of texture parameters on the retroreflection coefficient of asphalt pavement, this study obtained the macroscopic and microscopic texture properties of rutting board specimens and on-site asphalt pavement using a pavement texture tester. The macro- and microtexture parameters, such as macroscopic texture distribution density (D1), microscopic texture distribution density (D2), profile height root-mean-square (Rq), profile slope root-mean-square (Δq), skewness Rsk and kurtosis Rku, were measured, and the corresponding retroreflection coefficient RL was measured using a retro-reflectometer. In the laboratory ex-periments, rutting specimens of AC-13, SMA-13, and OGFC-13 asphalt mixtures were formed. The changes in texture parameters and retroreflection coefficient of different rutting specimens before and after crushing were studied, and a factor influence model between macro- and microtexture parameters and RL was established. And the correlation models of texture index and RL of asphalt pavement are further established. The results showed that in the single factor model, the param-eters can be used to characterize RL with high prediction accuracy, whereas for the on-site meas-urements, the three parameters of Δq, Rsk, and Rku can characterize the RL well. The nonlinear model established on the basis of the B-P neural network algorithm improves its prediction ac-curacy. This research can provide ideas for optimizing the reflection characteristics of asphalt pavement and further provide a decision-making basis for road lighting design.

This paper presents a new method of process parameters optimization, adequate for 3D printing of PLA (Polylactic Acid) components. The authors developed a new Hybrid Manufacturing Equipment (HME), suitable for producing complex parts made from a biodegradable thermoplastic polymer, for environmental sustainability. Our new HME equipment is producing PLA parts by both additive and subtractive techniques, with the aim of obtaining accurate PLA components with a good surface quality. A design of experiments has been applied for optimization purposes. The following manufacturing parameters were analyzed: rotation of the spindle, cutting depth, feed rate, layer thickness, nozzle speed, and surface roughness. Linear regression models and neural network models were developed to improve and predict the surface roughness of the manufactured parts. A new test part was designed and manufactured from PLA, to validate the new mathematical models, which can now be applied for producing complex parts made from polymer materials.

The objective of this study is to investigate the use of excavation behavior prediction and analysis software in the field of civil en-gineering. PLAXIS and SoilWorks, widely used in the engineering and academic communities, were employed as research tools for analyzing gravel layers and deriving appropriate ranges of soil elastic modulus for different software programs. By collecting excavation cases in the Xindian area of New Taipei City, Taiwan, and conducting deep excavation analysis using the displacement of retaining walls, this study provides recommended ranges for localized selection of soil elastic modulus. The suggested range for PLAXIS is 7,840 N/m² to 9,800 N/m², while Soil-Works suggests a range of 2,450 N/m² to 3,430 N/m². These ranges allow for reasonable estimation of maximum deformations during the final excavation stage. Based on the research findings, it is recommended that engineers refer to the provided ranges when selecting soil elastic modulus for excavation analysis in gravel layers using different soft-ware programs in the Xindian area of Taiwan to improve the accuracy of deformation predictions during the final excavation stage. These results serve as important references for engineers and contribute to the effective prediction and management of excavation behavior in civil engineering projects.

In this contribution to the Festschrift for Prof. Remo Ruffini, we investigated a formulation of quantum gravity based on the Wheeler-DeWitt (WDW) equation combined with the classical concepts of the branch-cut cosmology, which contemplates as a new scenario for the origin of the Universe, a smooth transition region between the contraction phase, prior to the primordial singularity, and the subsequent expansion phase. Through the introduction of an energy-dependent effective potential, which describes the space-time curvature associated with the embedding geometry and its coupling with the cosmological constant and matter fields, solutions of the WDW equation for the wave function of the Universe are obtained. The Lagrangian density is quantized through the standard procedure of raising the Hamiltonian, the helix-like complex scale factor of branched cosmology as well as the corresponding conjugate momentum to the category of quantum operators. As a novelty, ambiguities in the ordering of the quantum operators are overcome with the introduction of a set of ordering factors α, whose values are restricted to the integers α=[0,1,2], since non-integers have no physical meaning, allowing this way a broader class of solutions for the wave function of the Universe. As another novelty, additional energy-dependent parametrizations are considered, more specifically, in addition to a branched universe filled with underlying background vacuum energy, matter and radiation, in order to make contact with standard model calculations, we additionally supplement the formulation with baryon matter, dark matter and quintessence contributions. As an additional novelty, the boundary conditions for the wave function of the Universe are imposed by assuming the Bekenstein criterion. Our results indicate this way, as a novelty conclusion, the consistency of a topological quantum leap, or alternatively a quantum tunneling, for the transition region of the early universe in contrast to the classic branched cosmology view of a smooth transition.

Introduction Currently, the increase in the percentage of obese people observed along with the development of civilization, reaching the level of a global pandemic, has forced the search for methods of effective and permanent obesity treatment. Obesity is a multifactorial disease, it coexists with many disease entities and requires multidisciplinary treatment. Obesity leads to metabolic changes in the form of metabolic syndrome, which includes, among others, atherogenic dyslipidemia. The proven relationship between dyslipidemia and cardiovascular risk enforces the need to effectively improve the lipid profile of obese patients. Laparoscopic sleeve gastrectomy is a method of surgical treatment of morbid obesity which improves bariatric and metabolic parameters. The aim of the study was to assess the effectiveness of laparoscopic sleeve gastrectomy (LSG) in improving lipid profile parameters in 1-year follow-up. Material and Methods Bariatric parameters of 196 patients who underwent laparoscopic sleeve gastrectomy as well as lipid profile of total cholesterol (TC), high-density lipoprotein (HDL), low-density lipoprotein (LDL), non-NDL, and triglycerides (TG) in 1-year observation were analyzed. Results Improvements in bariatric parameters were observed in patients after LSG. Total cholesterol, low-density lipoprotein (LDL), triglycerides and non-HDL levels decrease were observed along with the increase of high-density lipoprotein (HDL) cholesterol level. Conclusions Sleeve gastrectomy is an effective method of treating obesity and improving the lipid profile in obese patients.

Self-healing ceramic composites are promising smart materials for high-temperature applications. To better understand their behaviors under service conditions, numerous studies have been performed both experimentally and numerically, and kinetics parameters such as activation energy and frequency factor are reported to be indispensable for investigating healing phenomena. Here, we propose a method for determining the kinetic parameters of self-healing ceramic composites based on the oxidation kinetics model of strength recovery. These parameters are determined by an optimization method using experimental strength recovery data under various healing temperatures and times and microstructural features on the fractured surfaces. Alumina and mullite matrix-based self-healing ceramic composites, such as Al2O3/SiC, Al2O3/TiC, Al2O3/Ti2AlC (MAX phase), and mullite/SiC, were selected as target materials. The theoretical strength recovery behaviors of the cracked specimens obtained from the determined kinetic parameters were compared with the experimental results. The determined parameters are within the previously reported range, and the predicted strength recovery behaviors are reasonably agreed with the experimental values. The proposed method can also be applied to other self-healing ceramics with matrices reinforced with different healing agents to evaluate oxidation rate, crack healing rate, and theoretical strength recovery behaviors for designing self-healing materials used in high temperature applications. Furthermore, the healing ability of composites can be fairly discussed regardless of the type of strength recovery test.

Magneto-rheological dampers (MR-dampers) are increasingly used in construction applications to reduce the dynamic response of structures to seismic activities or severe wind loading. Sensors attached to the structure will signal the computer to supply the dampers with electric charge that transfers the MR fluid to a near-solid material with different physical and mechanical properties (viscoelastic behavior). Control algorithms govern the fluid to near-solid conversion, which controls the behavior of the damper, and the performance of the structure under the seismic or wind loading event. The successful optimization of control parameters minimize the overall structural response to dynamic forces. The main objective of this research is to change the output behavior of specific floors within a building subjected to seismic excitation by optimizing the MR-dampers control parameters to impact the behavior of a specific floor or number of floors within the building. The adjustment of control parameters to attain this objective was validated in multiple case studies throughout this research. The successful implementation of the research outcome will result in optimized MR-damper design to meet the performance-based criteria of building projects.

For technical or medical applications, the knowledge of the exact kinematics of the human hand is key to utilizing its capability to handle and manipulate objects and to communicate with other humans or machines. The optimal relationship between the number of measurement parameters, measurement accuracy as well as complexity, usability and cost of the measuring systems is hard to find. Biomechanic assumptions, the concepts of a biomechatronic system and the mechatronic design process as well as commercially available components are used to develop a sensorized glove. The proposed wearable can measure 14 of 15 angular values of a simplified hand model introduced in this paper. Additionally, five contact pressure values at the fingertips and inertial data of the whole hand with a degree of freedom of six are gathered. Due to the modular design and a hand size examination based on anthropometric parameters, the concept of the wearable is applicable for a large variety of hand sizes and adaptable to different use cases. Validations show a combined root-mean-square error of 0.99° to 2.38° for the measurement of all joint angles at one finger, surpassing the human perception threshold and the current state of the art in science and technology for comparable systems.

The issue of monitoring and early warning of rock instability has received increasing critical attention in the study of rock engineering. To investigate the damage evolution process of granite under triaxial compression tests, acoustic emission (AE) tests were performed simultaneously. This study firstly introduced two novel parameters, i.e., the coefficient of variation (CoV) of the information entropy and correlation dimension of the amplitude data from the AE tests, to identify the precursor of the failure of granite. Then the relationship between the changes in these parameters and the stress-time curve was compared and analyzed. The results of this study show that: (1) There is a strong correlation between the CoV of the information entropy and the failure process of granite. The granite failed when the CoV curve raised to a plateau. (2) The fluctuation of the correlation dimension indicates the different stages of the loading process, i.e., the initial compaction stage, the linear elastic stage, the yield stage, and the failure stage. Each stage contains a descending and a rising process in the correlation dimension curve, which indicates that this parameter could be used to identify the precursor of the failure as well. (3) The combined analysis of the two can improve the accuracy of rock instability prediction. This study provides new insights into the prediction of rock instability, which has theoretical implications for the stability of subsurface engineering rock masses.