The ductile behavior of strain hardening cement-based composites (SHCC) under direct tensile load makes them promising solutions for applications where high energy dissipation is needed, such as earthquake, impact by a projectile, or blast. However, the superior tensile ductility of SHCC due to multiple cracking does not necessarily entail compressive and shear ductility. As an effort to characterize the behavior of SHCC under impact compressive and shear loading, relevant to the mentioned high-speed loading scenarios, the paper at hand studies the performance of a SHCC and its constituent cement-based matrices using the split-Hopkinson bar method. For compression experiments, cylindrical specimens with a length-to-diameter ratio (l/d) of 1.6 were used. The selected length of the sample led to similar failure modes under the quasi-static and impact loading conditions, which was necessary for a reliable comparison of the obtained compressive strengths. The impact experiments were performed in a split-Hopkinson pressure bar (SHPB) at a strain rate that reached 110 s-1 at the moment of failure. For shear experiments, a special adapter was developed for a split-Hopkinson tension bar (SHTB). The adapter enabled performing impact shear experiments on planar specimens using the tensile wave generated in the SHTB. Results showed a dynamic increase factor (DIF) of 2.3 and 2.0 for compressive and shear strength of SHCC, respectively. As compared to the non-reinforced constituent matrix, the absolute value of the compressive strength was lower for the SHCC. Contrarily, under shear loading, the SHCC yielded the higher shear strength than the non-reinforced matrix.

COVID-19, previously known as “2019 novel coronavirus”, is a newly discovered virus which causes severe acute respiratory syndrome, similar to corona virus 2 (SARS-CoV-2), which has spread widely through human to human contact and was declared a pandemic by the WHO in March 2020. To cope with this pandemic many countries have adopted nationwide lockdowns which restrict nonessential activities and encourage their populations to avoid public transport, work from hone wherever possible, and to maintain social distancing at all times. While the severity of these shutdowns has varied with country, large geographic regions of the world (including China, India, Iran, Italy, Spain, and the USA) have all been severely affected, not just in the loss of human life, but also in terms of the financial impacts the lockdowns will have on their countries future prosperityIt was previously reported that a number of environmental factors, including humidity and temperature, played an important role in development and spread of the SARS-Corona Virus infection with the virus retaining viability for over 5 days at temperatures between 22–25^oC and relative humidity (RH) of 40–50%. Whereas, elevated temperatures and higher RH (38^oC, and >95% RH) decreased virus viability (Kroumpouzos et al., 2020). The spread of COVID-19 started in low temperature areas of China, with major outbreaks subsequently occurring in Iran, Japan, Northern Italy and South Korea. These new virus epicenters all had similar temperature and latitude, along the 30-50^◦N” zone. Subsequently, the virus was spread to regions of elevated temperature, such as India, the Middle East and Thailand, due to international travel (Kroumpouzos et al., 2020).The aim of this study was to consider the environmental impact of COVID-19, including water pollution. The paper is divided into four sections. In the first section the current literature related to COVID-19 is reviewed. In the second section a recent update on COVID-19 globally is presented, followed by a descriptive impact on the environment in the third section and finally in the fourth section the COVID-19 related worldwide environmental impact is discussed. Since COVID-19 is a currently an active pandemic with no end in sight, while constructive conclusions can only be made on the limited data currently, which may be prone to high errors. However, these conclusions may provide some preliminary suggestions for assisting in assessing spreading patterns of COVID-19 across the globe, and may be of long-term significances with respect to assessing the environmental impact of lockdown policies due to COVID-19 worldwide.

Due to remarkable socioeconomic development, an increasing number of karst rocky desertification areas have been severely affected by human activities in southern China. Effectively analyzing human activities in karst rocky desertification areas is a critical prerequisite for managing and restoring areas with tremendous negative impacts from desertification. At present, a timely and accurate way of quantifying the spatiotemporal variations of human activities in karst rocky desertification areas is still lacking. In this communication, we attempted to quantify human activities from the corrected NPP-VIIRS nighttime light data from 2012 to 2018 based on statistical analysis. The results show that a significant increase of night lights could be clearly identified during the study period. The total nighttime lights (TL) related to severe karst rocky desertification (S) were particularly concentrated in Guizhou and Yunnan. The nighttime light intensity (LI) related to the S areas in Chongqing were the strongest due to its rapid socioeconomic development. The annual growth rate of nighttime lights (GL) has been slow or even negative in Guangdong because of its various karst rocky desertification restoration programs. This communication could provide an effective approach for quantifying human activities and provide useful information about where prompt attention is required for policy-making on the restoration of the karst rocky desertification areas.

Consideration of climate change in Environmental Impact Assessment (EIA) is a rather novel topic, which became partly mandatory through the revised EU Directive on EIA. Through a mixed-methods approach involving key-actors from EIA practice, decision making and climate adaptation planning, this study presents a transdisciplinary point of view on barriers and opportunities to tackle climate change adaptation in environmental assessment of large-scale projects. It is based on both a retrospective ex-post evaluation of existing practices in Austria and Germany as well as prescriptive examination and development of outcomes for practice through the development of a climate-fit toolkit that supports the incorporation of climate change impacts into EIAs. The scenario analysis applied with a back casting approach provided the opportunity to look beyond limitations related to legal compliance and partly lack of data identified by previous research. Three scenario narratives were elaborated based on nine key impact factors based on literature review, content analysis of EIA documents and interviews with EIA actors. The groups of actors carried out a prioritization of actions towards consideration of climate change in EIA. Finally, the actors were involved in co-production of an online tool-kit for Austrian and German EIA practice.

Human-generated, natural occurrences and other actions connected with the petroleum industry have contributed expansively to the contamination of numerous areas of human habitant, thus effecting overwhelming challenges and constraints to sustainable human health, development and the biosphere. The sites commonly associated include derelict pits, hydrocarbon onshore release sites, and places to where oil slicks exuding from offshore releases are blown onshore. In diverse cases, remediation is pertinent to restore the affected ambient. This is required despite the complexity and intricate pore structure and fluid trafficking trajectories of soil which are not easily amenable to remediation. Due to the complex assemblage of contaminated soil, it is necessary to conduct an encompassing site assessment by considering the potential impact of the environment and human health prior to proper selecting and implementing of a desirable remediation process. There are extant remediation methodologies which are effective and efficient for the clean up of contaminated shorelines and other petroleum-contaminated sites involving inter alia agricultural activities. There are salient variations in the techniques to expunge contaminants regarding spatiotemporal and pecuniary costs or considerations due to the gross environmental hazards entailed. This study provides for the opportunity to harness and sustain the capacity for the mitigation of untoward impacts, and induce the latitude for an enabling condition in sustainable human health, environment and development in the petroleum industry and other anthropogenic activities.

In some cases, the human impact on ancient landscapes has been so profound that local soils still remain significantly affected even after hundreds and thousands of years after ending impact. We studied the Late Bronze Age Muradymovo settlement located in Urals, Russia, aiming to estimate the consequences of the ancient people activity for environment. Despite the present humid climate, the modern soils inside the cultural layer of the study site contain more than 27% of gypsum at a depth of just 10 cm from the surface, and a microrelief of the study site is typical of a gypsum desert. The nearby background Chernozems are gypsum-free to a depth of 2 meters. According to the archaeological data, the ancient people belonged to the ‘Srubno-Alakul’ archaeological culture (1750–1350 yrs BC cal) and had a tradition of building their houses from gypsum rocks. At the present time, this area is still unsuitable for human settlement. The properties of modern soils inside the cultural layer of the study site are directly affected by the Late Bronze Age human activities. It has been identified on soil morphology, micromorphology and chemical properties of soils developed inside the cultural layer of the settlement.

In this paper, a numerical modeling of the impact, spreading, and eventually rebound of a viscoelastic droplet is reported. The numerical model is based on the volume of fluid (VOF) method coupled with the FENE-CR constitutive equations, and accounts for both the surface tension and the substrate wettability. The FENE-CR constitutive equations are used to model the polymer solution, while taking advantage of its rheological characterization. The comparison is performed between droplets of Newtonian solvent and a monodisperse polymer solution. The droplet impact on both hydrophilic and superhydrophobic substrate is analyzed through a detailed analysis of the spreading diameter evolution. It is found that while the droplet kinematic phase seems independent of the substrate and fluids properties, the recoiling phase is highly related to all of them. In addition, the model infers a critical polymer concentration above which the droplet rebound from a superhydrophobic substrate is suppressed. The simulation is of particular interest to ink-jet processing, and demonstrates the capability of the model to handle complex non-Newtonian droplet dynamics.

The welding performance of shipbuilding steel under large heat input could be improved greatly by the Mg addition to the steel, but the impact toughness of the HAZ is not stable. According to the three different thickness steel plates obtained in the industrial experiment, the large heat input welding was carried out by different heat input, and the impact toughness analysis, impact fracture analysis, metallographic microstructure analysis and inclusions analysis were carried out. The results showed that, the HAZ of three kinds of thickness plates induced a lot of IAF, with Mg addition, the inclusion dimension had been reduced effectively, and the IAF induced ability of the inclusions had also been improved. The difference of HAZ impact toughness with different welding heat input and different impact temperature is significant, in consideration of the influence of welding heat input and metallographic microstructure on impact toughness of HAZ, the welding heat load had far greater effect than metallographic microstructure on ductile-brittle transition temperature. At the same time, if the original metallographic microstructure of steel was coarse, the pinning effect of the inclusions would be reduced significantly, and the microstructure of HAZ would be coarsened and the impact toughness of HAZ would be decreased, so there is a certain matching relationship between the metallographic microstructure and the inclusion dimension.

This study aimed to evaluate the relationship between various asbestos exposure routes and asbestos-related disorders (ARDs). The study population comprised 11,186 residents of a metropolitan city who lived near asbestos factories, shipyards, or in slate roof-dense areas. ARDs were defined from chest X-rays indicating lower lung fibrosis (LFF), pleural disease (PD), and lung masses (LMs). Of the subjects, 11.2%, 10.4%, 67.2% and 8.3% were exposed to asbestos via occupational, household, neighborhood, and slate roof routes, respectively. Regarding adjusted confounders and other exposure routes, the odds ratio (OR) of PD from household exposure (i.e., living with asbestos-producing workers) was 1.9 (95% confidence interval: 0.9–4.2), and that of LLF and PD from neighborhood exposure, or residing near asbestos factories) for <19 or >20 years, or near a mine, were 4.1 (2.8–5.8) and 4.8 (3.4–6.7), 8.3 (5.5–12.3) and 8.0 (5.5–11.6), and 4.8 (2.7–8.5) and 9.0 (5.6–14.4), respectively. The ORs of LLF, PD, and LM among those residing in slate-dense areas were 5.5 (3.3–9.0), 8.8 (5.6–13.8), and 20.5 (10.4–40.4), respectively. Substantial proportions of citizens residing in industrialized city have potentially been exposed to asbestos, and various exposure routes are associated with the development of ARDs. Notably, this may be the first finding of the health effects of slate roof exposure. However, given the limitations of this study, including potential confounders such as socioeconomic status, further research is needed.

2.25Cr-1Mo steel with high strength at high temperatures and good hydrogen resistance is widely used for power generation boiler material in high temperature and pressure use environments. Following the test evaluation of the ASME Boiler and Pressure Vessel Code, specimens from the base metal of a boiler pipe were found to have impact toughness values of 285 and 21 ft-lb, which are drastically different values. The analysis of the fracture surface of the 21 ft-lb test specimen revealed MnS inclusions, and it was found that cracks initiated at the inclusions. Observation of the cross-section of the crack propagation front revealed that cracks propagated along the ferrite regions and precipitate voids. Inclusions were also found in the 285 ft-lb impact specimen; however, the volume fraction of the inclusions was significantly less than that of the 21 ft-lb specimen. It was also found that the ferrite and carbide content of the 285 ft-lb specimen was less than 21 ft-lb specimen. The reason that the inclusions, ferrite, and carbide content differed in the two adjacent impact test specimens was analyzed. The effects of micro-segregation, such as MnS inclusions on ferrite and carbide, were compared and analyzed.

Impact characterization of linear resonant actuator (LRA) is studied experimentally by newly developed drop tester, which can control various experimental uncertainty such as rotational moment, air resistance, secondary impact and so on. The feasibility of this test apparatus was verified by comparison with free fall test. By utilizing a high-speed camera and measuring the vibrational displacement of spring material, the impact behavior was captured and the damping ratio of the system was defined. Based on the above processes, the finite element model was established and the experimental and analytical results were successfully correlated. Finally, the damage of the system from impact loading can be expected by developed model and as a result, this research can improve the impact reliability of LRA.

Experimental tests and numerical analyses were carried out on short, thin-walled channel columns with modified cross-sectional shape. The columns were loaded with an axial compressive force applied at the center of gravity of the cross section. Tests were carried out on a universal testing machine, while numerical analyses were performed in ANSYS software. The purpose of the tests was to determine the values of critical forces for the compressed columns and to determine the values of maximum forces at which failure of the columns occurs. Critical forces were determined based on the strain-averaged method. Based on the study, it was found that the strength and resistance to loss of stability of columns is primarily affected by their stiffness, and therefore by the shape of the cross-sections. In addition, for short columns, it seems more important to determine the value of maximum forces than the values of critical forces.

Degenerative spinal cord (SC) compression is a frequent pathological condition with increasing prevalence throughout aging. Initial non-myelopathic cervical SC compression (NMDC) might progress over time into potentially irreversible degenerative cervical myelopathy (DCM). While quantitative MRI (qMRI) techniques demonstrated the ability to depict intrinsic tissue properties, longitudinal in-vivo biomarkers to identify NMDC patients who will eventually develop DCM are still missing. Thus, we aim to review the ability of qMRI techniques (such as diffusion MRI, diffusion tensor imaging (DTI), magnetization transfer (MT) imaging, magnetic resonance spec-troscopy (1H-MRS)) to serve as prognostic markers in NMDC. While DTI in NMDC patients con-sistently detected lower fractional anisotropy and higher mean diffusivity at compressed levels caused by demyelination and axonal injury, MT and 1H-MRS along with advanced and tract-specific diffusion MRI recently revealed microstructural alterations also rostrally pointing to Wallerian degeneration. Recent studies also disclosed significant relationship between micro-structural damage and functional deficits, assessed by qMRI and electrophysiology, respectively. Thus, tract-specific qMRI in combination with electrophysiology critically extend our under-standing of the underlying pathophysiology of degenerative SC compression and may provide predictive markers of DCM development for accurate patient management. However, the prog-nostic value must be validated in longitudinal studies.

We examine worldwide Property and Casualty and Life and Health insurance companies from 2004 until 2023, implementing panel regression models and mediation analysis to show that insurers raise their reserves when they face increasing costs for their potential environmental damages, ultimately reducing their profitability and underwriting capacity. Our findings extend to the insurance sector the previous evidence on banks, demonstrating that environmental damages could affect profits and solvency of financial intermediaries. These insights are important especially for insurance managers and regulators.

A recently published article posited the use of polymer matrix composites (PMCs) as a replacement material for low-carbon steel (LCS) in large power transformer (LPT) tanks [1]. PMCs offer potential advantages such as weight reduction, corrosion prevention, and self-healing of the tank material which may not be achievable with traditional LCS. LCS can arrest ballistic projectiles at relatively low velocities, but at higher velocities, penetration can occur leading to a potential major transformer failure. Numerical simulations of steel projectile impacts upon LCS plates and glass and/or carbon fiber polymer composite laminates showed that with sufficient thickness both could prevent projectile penetration. This prevention was especially efficient when the plates were coated with a high strain rate sensitive material such as polyurea (PU). Our simulations show that the addition of a 3 mm coating of PU to a standard 10 mm thick LCS plate used in LPT tanks could prevent penetration of a 400 m/s steel projectile. For PMC plates, the simulations with the same projectile velocity showed three times faster deceleration with a 3 mm PU coating than without the coating. Thus, two realistic approaches to improving the ballistic protection of LPTs are presented. In addition to their other advantages, this research clearly shows that PMCs with the coating could provide significant ballistic protection for the next generation of LPT tanks.

Emphasis on primary health care (PHC) is the most efficient and economical approach to achieving universal health coverage. The aim of the study is to examine PHC publications from 2011 to 2023 in the Asian Pacific region (APR) using the Web of Science (WoS) database. Academic papers in the WoS PHC subject category published in the APR from 2011 to 2023 were retrieved and analyzed. A total of 4,283 papers were published in the WoS PHC category from APR onwards. The annual number of published papers and their citations increased from 2011 to 2023. Australia led PHC publications in APR with 3,049 publications (71.19% of APR regional output). New Zealand had the highest number of citations per paper (13.76) and the highest mean impact factor (3.23±1.80). Publications in the WoS PHC category also covered a wide range of topics, including Medicine General Internal (64.77%), Health Care Sciences Services (21.88%), Health Policy Services and Public Environmental Occupational Health (21.36%), demonstrating the breadth of PHC research. Australia dominates the output of PHC publications in the APR. Australian Family Physician and Australian Journal of Primary Health are the leading journals publishing PHC papers in the APR.

In India, epilepsy is often viewed with superstition, considered a curse rather than a medical condition. Unfortunately, many affected individuals never receive proper medical attention from neurologists, leading them to seek out alternative remedies, including sorcery. Presently, the number of neurologists in India stands at approximately 3000, a concerning figure given the prevalence of epilepsy, which is reported to affect 5.59 to 10 individuals per 1000. This equates to over one million epilepsy patients across the country, representing more than 1% of the total population. Alarmingly, rural areas experience a higher incidence of epilepsy, around 2%, compared to urban centres, where the incidence is approximately 0.5%. This stark contrast underscores the urgent need for improved access to neurological care, particularly in underserved regions.The term "epilepsy" originates from the Greek verb meaning "to seize" or "to get hold of," forming the basis of its etymology. In certain societies, epilepsy is still interpreted as a "penalty for involvement in a forbidden ritual," although perceptions vary among different cultural groups. Individuals diagnosed with epilepsy (PWE) often exhibit behaviours that have led some to speculate about demonic possession or past-life transgressions as causative factors. Consequently, the term "epilepsy" carries diverse social connotations, leading to variations in treatment approaches based on differing perspectives of the condition. Regrettably, some negative attitudes towards epilepsy have fueled stigma, enduring disability, and significant adverse outcomes for those living with the condition.The majority of unreported cases turn to sorcery, exacerbating the already high mortality rates associated with epilepsy disorder and status epilepticus. Various treatment modalities exist for patients with epilepsy to manage their seizures. Given the debilitating and life-altering nature of epilepsy, India offers a range of options including medications (antiepileptic drugs or AEDs), devices, and surgical interventions. When an individual receives a diagnosis of epilepsy (defined as experiencing at least two unprovoked seizures within a short timeframe), life can be dramatically impacted. Several cases highlight the challenges patients face, leading to an increase in Disability Adjusted Life Years (DALY) overall. For newly born infants, constant vigilance from the mother is essential to monitor for any signs of seizure activity around the clock. When a pediatric patient is enrolled in school, their education is often profoundly disrupted. Should the patient be female, her existence would undergo a profound transformation, marked by societal perceptions deeming her as unfortunate and rendering the prospect of marriage untenable. Seizures in young adults precipitate job loss, thereby exacerbating societal burdens. Conclusion: There is a pressing need to raise awareness about epilepsy among the general populace of India. Dispelling misconceptions surrounding epilepsy is essential to steer individuals away from reliance on superstition, and instead, encourage them to seek guidance from certified specialists in nervous system disorders. Thankfully, by following the treatment regimen prescribed by a qualified neurologist, patients can significantly increase their chances of living a life free from seizures, thereby enhancing their overall quality of life and personal fulfilment.

This study examines the nexus between oil prices and inflation in G20 economies, addressing critical gaps by adopting a comparative approach across three pivotal oil price downturns in 2008, 2014, and 2020 (COVID-19). The study utilized monthly time series data from January 2000 to December 2023 and the Bayesian Structural Time Series (BSTS) approach for causal impact analysis. The study found that during the global financial crisis (December 2007 to June 2014), advanced economies like Australia and the UK displayed varying degrees of negative absolute causal impact, aligning with the deflationary impact of falling oil prices. In contrast, emerging economies faced significant negative causal impacts. From June 2014 to January 2020, diverse inflation impacts were observed across G20 economies after a significant oil price decline. Advanced economies like Australia and emerging economies like Brazil experienced negative impacts, while others showed negligible effects. In the subsequent period from January 2020 to December 2023, amid the COVID-19 pandemic and substantial oil price decline, G20 countries exhibited varied inflation outcomes. Positive absolute effects indicated a notable rise in inflation with China standing out with a substantial negative impact. The wavelet coherence analyses also showed an asymmetrical impact of oil prices on inflation. The findings suggest that policymakers should adopt proactive and adaptive policy frameworks, considering the asymmetric responses of G20 economies to oil price dynamics.

During public health events, Active Mobility (walking and cycling) plays an important role in securing residents' travel. To enhance the resilience of urban transportation, this article integrates the travel environment elements for walking and cycling and constructs a travel environment for Active Mobility evaluation index system. This article uses survey data from the main urban area of Harbin in the context of the COVID-19 pandemic in May 2022, and combines the Gradient Boosting Decision Tree (GBDT) and Impact-Asymmetry Analysis (IAA) methods to analyze the satisfaction of the travel environment for Active Mobility. It proposes strategies for optimizing the travel environment for Active Mobility, ensuring residents' travel during public health events, guiding them to adopt Active Mobility, and improving urban transportation resilience. This research shows that Active Mobility can enhance urban transportation resilience. In addition, there are differences in resident demand for walking and cycling environments in the travel environment for Active Mobility. Residents are more concerned about the comfort of the walking environment, while they prioritize the convenience of the cycling environment.

This article conceptualises the link between firms’ value chains and distribution networks and the requirements for double materiality assessments in contemporary reporting regulations worldwide. The new European Sustainability Reporting Standards (ESRS) and the standards for sustainability reporting issued by the International Sustainability Standards Board (ISSB), called IFRS S1 and IFRS S2, require companies to report their own direct (scope 1) and indirect (scope 2) greenhouse gas (GHG) emissions as well as GHG emissions in their value chains and distribution networks (both scope 3). However, GHG emissions comprise just one dimension of information that is relevant to understand when assessing, managing and reporting the footprints and impacts of a firm and are, therefore, only a fraction of the key performance indicators (KPIs) related to ESG that should be disclosed. Through a case study, this article demonstrates the connection between the due diligence analysis of firms’ value chains and distribution networks, the analysis of the competitive parameters of the business model, the identified impacts, risks and opportunities, and the double materiality perspective. The double materiality perspective prioritises actions based on probability and significance, creating a natural space to identify KPIs. The article concludes by applying the REGS model and illustrating how it can assist firms in identifying relevant KPIs based on double-materiality assessments.

The Pearl River Delta (PRD) has undergone complex geological development within a multi-island faulted basin, shaped by the interplay of regional tectonic movements, Quaternary sea-level fluctuations, and fluvial-marine interactions. Despite a great number of studies on the Holocene sedimentary sequences and spatial difference of lithofacies and environments, scant attention has been paid to the overarching human influence on deltaic evolution and coastline modifications since the Neolithic epoch. To further elucidate the spatial variation in Holocene sedimentation and its underlying basement topography shaped during the Last Glacial Maximum (LGM), we compiled a comprehensive dataset incorporating borehole data from over 2,800 cores within the PRD. Subsequently, high-resolution isobath maps of Quaternary deltaic deposits were generated, offering unprecedented insights into sediment distribution. This dataset facilitated a nuanced reconstruction of pre-Holocene topography, revealing a zone characterized by elongated, deep-incised valleys governed by NW-SE fault orientations. Further, we delineated coastline shifts since the period of maximum marine transgression (~7000 years BP), contributing to an enhanced understanding of the formation and evolutionary patterns of the delta and the river network oscillations. Our findings illuminate increasing anthropogenic impact on the rate of fluvial sedimentation and land growth, particularly accentuated over the last two millennia, favoring deltaic accretion. The current study has considerable implications for understanding the dynamic interplay between land-sea interactions and anthropogenic activities in shaping the delta, and stands to significantly inform land and resource management strategies, as well as future urban planning within the delta's bay areas.

Abstract: The species composition, the structure of phytoplankton communities, hydrochemical parameters in the artificial cooling reservoir of one of the largest thermal power plants (TPP) in the north-east of Europe in the Pechora River basin, Komi Republic were studied in the ice-open period in June and August. Altogether 81 species of algae and cyanobacteria was revealed with the last one predominated. Among cyanobacteria and algae (Bacillariophyta, Chlorophyta), indicators of water quality were found. Assessment of water quality according to the species composition and abundance of indicator phytoplankton species showed that the waters of the Pechorskoe Reservoir can be at-tributed to the III class of water quality, beta-mesosaprobic self-purification zone, with water quality of satisfactory purity, retaining the ability to self-purify. An increase in the diversity of plankton communities and high values of their abundance and biomass under the influence of the warming effect of TPP water outlet were noted and revealed its spatial distribution over the reservoir surface. The plankton of the northern reservoir under the influence of warm waters indicates a slight in-crease in the trophic status of the studied water body, which is also confirmed by the data of hydrochemical analysis. Ecological mapping for the chemical and biological variables as well as pollution indices over the water area of the reservoir was carried out. The results obtained can be used to make forecasts of changes in the phototrophic biota of small northern water bodies under the conditions of climate change.

The use of bioethanol in cooking is not new, but until recently its application has been confined exclusively to small scale projects. However, a new bioethanol cooking utility in Kenya has now reached mass market adoption, serving more than 950,000 households with cooking fuel since launching in late 2019. Its success was made possible by a significant investment in technology to facilitate safe, convenient and affordable fuel distribution. It is funded by climate finance which is based on bioethanol fuel replacing charcoal used for cooking, a leading cause of African defor-estation. This development has been so recent that it has not widely been discussed in the academic literature. More broadly, the health, environmental and economic impacts of bioethanol for cooking have not been systematically assembled in one place. This article details what is known about the impact of bioethanol for cooking, how and why bioethanol for cooking was able to suddenly reach commercially viable scale in spite of the challenges it faced. It also discusses implications for further scaling of clean cooking fuel solutions.

Wood plastic composite usage and demands have increased due to chemical, and mechanical properties when compared to plastic materials. However, because of the possibility of structural and mechanical changes of the material when exposed to external environment more research needs to be done. In the present study yellow birch/HDPE composites materials made by injection molding were treated by zinc oxide and exposed to fungal rots. Mechanical properties of the composites were assessed by Tensile and Izod impact test. The impact energies of the samples loaded with 30 % ZnO-treated fibers and exposed to G. trabeum and T. versicolor decreased, compared to when samples were not treated with ZnO. The mechanical properties of all samples treated with ZnO and exposed to rot decreased which were reported as a decreased Young's modulus and impact energies. ZnO prevented mycelium proliferation which was nonexistent on samples. It has been noted that the decrease in mechanical properties of treated samples was due to NaOH used to dissolve the ZnO powder.

The decreasing width, increasing aspect ratio RDL presents significant challenges to design for reliability (DFR) of advanced package. Therefore, this paper proposes a ML based RDL modeling and simulation method. In the method, RDL is divided into blocks and subdivided into pixels of metal percentage, and the RDL is digitalized as tensors. Then, an ANN-based surrogate model is built and trained by a subset of tensors to predict the equivalent material properties of each block. Lastly, all blocks are transformed into elements for simulations. For validation, line bending simulations were conducted on an RDL, with the reaction force as accuracy indicator. The results show that neglecting layout impact causes critical errors as substrate thins. By the method, the reaction force error is 2.81% and the layout impact can accurately be considered with 200×200 elements. For application, the TCT maximum temperature state simulation was conducted on a CPU chip. The simulation indicates that for advanced package the maximum stress more likely occurs in RDL rather than bumps, both RDL and bumps are critical impacted by layouts, and RDL stress is also impacted by vias/bumps. The proposed method precisely concerns layout impacts with little resources, presents an opportunity of efficiency improvement.

Sustainable supply chains have become increasingly crucial to address environmental and social challenges faced by societies worldwide. Last-mile delivery, which involves delivering products from a distribution center or warehouse to the final destination, typically a consumer's doorstep, is an essential component of the supply chain. However, it faces numerous challenges such as traffic congestion, air and noise pollution, and carbon emissions. This research paper explores the viability of last-mile delivery solutions for sustainable supply chains. The study reviews the literature on last-mile delivery challenges, sustainable last-mile delivery solutions, and case studies of sustainable last-mile delivery solutions. The results indicate that innovative last-mile delivery solutions, such as electric vehicles, cargo bikes, and drones, have the potential to reduce environmental impact and improve the efficiency of last-mile delivery while enhancing social equity. Additionally, partnerships between different stakeholders, including governments, logistics companies, and consumers, can contribute to the development of sustainable last-mile delivery solutions. The study concludes that sustainable last-mile delivery solutions are essential to achieving sustainable supply chains and recommends further research to explore the economic feasibility and scalability of these solutions.

Large Language Models (LLMs) have revolutionized the field of Artificial Intelligence with their ability to understand and generate natural language discourse. This has led to the use of LLMs in various creative fields such as music, art, and storytelling, which has sparked a debate on the impact of LLMs on human creativity. This article explores the cyclic effect of LLMs on human creativity, where LLMs can generate an ever-evolving cycle of creative output from both humans and machines. The article also highlights the importance of responsible and ethical use of LLMs, including privacy and copyright issues with the training data used by LLMs. The article emphasizes the need for transparency, data security measures, and AI governance policies to protect user data and ensure the safe use of LLMs. It also calls for the development of educational materials and resources to increase public understanding of LLMs and their ethical implications. The article concludes by highlighting the potential of LLMs as powerful tools for communication and education, but also emphasizes the need for ethical considerations to ensure the responsible and beneficial use of LLMs in society.

A crop-weed simulation model is presented to compare and evaluate Integrated Weed Management (IWM) strategies. Specifically, the model was parameterized for soybean crops in competition with Euphorbia davidii Subils. We used both, weed and crop demographic data surveyed in agronomic fields of the central zone of the Buenos Aires province, Argentina, throughout two crop cycles (2011/2012 and 2013/2014). The proposed model underwent a calibration process and subsequent validation with 70/30 % data split respectively (N=37). Two annual-based and one multiannual-based case studies were simulated to demonstrate the performance of the model. Different IWM strategies were compared under both, operational and tactical planning horizons through the evaluation of different model outcomes (i.e. crop yield, interspecific competition, economic return, and environmental impact). Our case studies results suggest that the inclusion of cultural management practices could reduce weed interspecific competition by 46 to 97 % and weed seed production by 40 to 89%. An increment in both expected crop yield, by 6 to 20%, and annual gross margin, by 44 to 199 US$.ha-1, were obtained in silico for similar levels of environmental impact.

Anticipating future successional forest trends in the face of ongoing global change is an essential conservation target. Mountain forests are especially sensitive to environmental shifts, and their past responses to climatic and anthropogenic (external) drivers may provide a basis for improving predictions of future developments. This paper uses independent high-resolution palynological and paleoclimatic reconstructions to statistically analyze the long-term effects of external drivers on regional forest succession in the central Iberian Pyrenees during the last 500 years. The dominant taxa of these forests (Quercus, Betula, Pinus) showed significant relationships with summer temperature, summer drought and autumn precipitation. Immediate and delayed (by two or more decades) responses of these trees to climatic drivers were identified. Regional succession showed a closed path, starting at the end points around the attraction domain of pine-dominated forests. This trajectory was determined by a trend toward anthropogenic forest clearing (16th to 18th centuries) and a reverse trend of natural forest recovery (18th to 20th centuries). Forest clearing was due to burning, facilitated by drought, and was followed by the expansion of cropping and grazing lands. Forest recovery was fostered by reduced human pressure and rising temperatures. The statistical approach used in this work has unraveled ecological relationships that remained unnoticed in previous works and would be important for predicting future successional trends under changing climates. The reported response lags of individual taxa to climatic drivers may complicate the establishment of reliable ecological relationships and should be addressed in future studies.

Since the exploitation of mineral resources results in the release of radionuclides, and consuming radionuclides affects public health in the short and long term. A case study of the environmental radiation impact from coal mining and germanium processing was carried out in southwest China. The coal mines contain germanium and uranium and have been exploited for more than 40 years. The farmlands around the site of coal mining and germanium processing have been contaminated by the solid waste and mine water in some extend since then. Samples of crops have been collected from contaminated farmlands in research area. The research area covers a radius of 5 km, in which there are 2 coal mines located. 210Pb and 210Po have been analyzed as the key radionuclides during monitoring program. The average activity concentrations of 210Pb and 210Po in the crops were 1.38 and 1.32 Bq/kg in cereals, 4.07 and 2.19 Bq/kg in leafy vegetables and 1.63 and 1.32 Bq/kg in root vegetables. The annual effective doses due to the ingestion of 210Pb and 210Po in consumed crops have been estimated for adult residents living in research area. The average annual effective dose was 0.336mSv/a, while the minimum was 0.171 mSv/a and the maximum was 0.948 mSv/a. The results show that crops grown on contaminated farmland contained an enhanced level of radioactivity concentration. Ingestion doses of local residents in research area were significantly higher than the China average level of 0.112 mSv/a, and the world average level of 0.042 mSv/a through 210Pb and 210Po in crops intake respectively.

This paper summarizes the estimates of the total changes in sales, expenses, and income of participants of the horticulture research and extension programs at the Mississippi State University - Coastal Research and Extension Center for the past five years. Major items outline the estimation procedures for the past five years. The average annual values were used in estimating the total economic impacts of added gross sales, expenses, and incomes of participants in horticulture events. The cumulative total impacts reach $8.7 million in sales, 76 jobs, $1.4 million in labor income, $2.4 million in value-added, and $0.4 million in local, state, and federal taxes. In addition, the total willingness to pay for the horticulture program by the adult participants reached $1.8 million. In comparison, the annual public spending on the horticulture program averaged $1.4 million, creating additional substantial economic impacts to the region.

This article analyses the environmental impact of the measures imposed during the SARS-CoV-2 pandemic. We compare the evolution of atmospheric pollution levels in recent years and during lockdown, and assess the effects of the decrease in mobility and changes in patterns and lifestyles during the latter period. Thus, the reduction in the risk to human health brought about by the improvement of air quality during the months of confinement through the use of dose-response functions is estimated. The focus of the case study is the island of Tenerife. The island of Tenerife has been selected because it can serve as an example for other sites in Europe. We distinguish between the three areas with the highest population concentrations: the Metropolitan, Southern, and Northern areas. The impacts of air pollution and its relationship with changes in consumption and activity patterns are clearly distinguishable. Therefore, the lessons learned can be easily extrapolated to other areas, in both island and mainland contexts.

The COVID-19 pandemic has left no one indifferent: all around the globe, people have felt the massive impact of a virus that has stopped the world in its tracks. Many countries have been forced to impose strict lockdowns, causing devastating damage to the overall economy and welfare state, but also leaving an unprecedented emotional footprint on almost everyone. In this paper, we aim to quantify, by building our own method how, this pandemic has affected people emotionally by detecting the shifts in the emotional profile of representative users in selected countries. Our method processes the social media stream adapting the Pleasure-Arousal-Dominance (PAD) approach to measure emotional states on the Russell Circumplex plane, allowing for not only an overall emotional shift quantification but also a detailed analysis at mood level. By focusing on certain emotions and searching behavior, we establish a relationship between the pandemic and the emotional response. Although the method can be applied to any location with a significant and varied amount of geo-localized social media streams, the scope of this paper covers the most representative cities in Europe.

With increasing interest in understanding contribution of secondary organic aerosol (SOA) to particulate air pollution in urban areas, an exploratory study was carried out to determine levels of carbonaceous aerosols and polycyclic aromatic hydrocarbons (PAHs) in the City of Kuala Lumpur, Malaysia. PM2.5 samples were collected using a high-volume sampler for 24 h in several areas in Kuala Lumpur during the north-easterly monsoon from January to March 2019. Samples were analysed for water soluble organic carbon (WSOC), organic carbon (OC), elemental carbon (EC) and secondary organic carbon (SOC) in PM2.5 was estimated. Particle-bound PAHs were analysed using gas chromatography-flame ionization detector (GC-FID). Average concentrations of WSOC, OC and EC were 2.7 ± 2.2 (range of 0.63-9.1) µg/m3, 6.9 ± 4.9 (3.1-24.1) µg/m3 and 3.7 ± 1.6 (1.3-6.8) µg/m3, respectively, with estimated average SOC of 2.3 µg/m3, contributing 34% to total OC. The average of total PAHs was 1.8 ± 2.7 ng/m3. Source identification methods revealed natural gas and biomass burning, and urban traffic combustion as dominant sources of PAHs in Kuala Lumpur. To understand human health risk posed by PAHs, a deterministic screening health risk assessment was also conducted for several age groups including infant, toddler, children, adolescent and adult. The total concentration of BaPeq is 3.8 ng/m3, with the average of 0.29 (range of 0.001-1.6) ng/m3. Carcinogenic and non-carcinogenic risk of PAH species were well below the acceptable levels recommended by the USEPA. Future work is needed using long-term monitoring data to understand the origin of PAH contributing to SOA formation and to apply source-risk apportionment to know better the potential risk factors posed by the various sources in urban areas in Kuala Lumpur.

The performance of a normal-strength SHCC under impact loading was studied using the results obtained from a split Hopkinson tension bar (SHTB). The focus of the investigation is to explain the mechanisms behind the peculiar rate-dependent behavior of SHCC under tensile loading. With the help of frames obtained by high-speed cameras and the subsequent Digital Image Correlation (DIC) analysis, the stress-strain relation of the SHCC obtained in SHTB was analyzed. The investigation of the composite’s behavior was supported by constituent-level experiments on the non-reinforced matrix of the SHCC and on the fiber-matrix bond. In the case of the constituent matrix, the well-known apparent increase in the tensile strength of the cement-based matrix and its influence on the behavior of SHCC was studied. For this purpose, experiments on the SHCC specimens with different geometries were performed in the SHTB. The results obtained from these experiments and those obtained by DIC show that commonly used analytical models, in which the specimen is assumed elastic, cannot capture the effects of structural inertia on the results. Thus, an alternative novel method based on the results of DIC has been used to explain and quantify the contribution of structural inertia. The rate-dependent behavior of the fiber-matrix bond was studied by performing high-speed single fiber pullout tests in a miniaturized split Hopkinson tension bar. This novel experimental technique enabled explanation of the rate-dependent bridging action of the fibers in SHCC. Based on the results, the enhanced behavior of SHCC under impact loading is explained.

COVID‑19 pandemic, also known as the coronavirus pandemic, has spread rapidly across the globe since the end of 2019 and brought impressive changes in our life and living through partial or full lockdown and reduced anthropogenic activities. Hence, it is imperative to investigate the impacts and consequences of COVID-19 on global eco-system and environment. The present study accordingly addresses the impacts and consequences of COVID-19 by ten environmental indicators; viz., global warming (or greenhouse gas emission), stratospheric ozone depletion, ozone formation (on human health), fine particulate matter formation, smog, ionizing radiation, human carcinogenic toxicity, human non-carcinogenic toxicity, water resource consumption, and effect on human health. The overall study has been performed in agreement with the standard principle and guidelines of life cycle assessment. Worldwide changes in consumption of fossil fuels, viz., petroleum, coal and natural gas, as a result of COVID-19 pandemic, has been the core theme of the study. Outcomes from the study show that COVID-19 has been a ‘blessing in disguise’ for the global environment with most of the above-mentioned indicators declining by approximately 20-30% in 2020 in comparison to the 2019 level.

The paper presents a conceptual model of the route of macroplastic debris (5 > mm) through a fluvial system, which can support future works on the overlooked processes of macroplastic storage and remobilization in rivers. We divided the macroplastic route into (1) input, (2) transport, (3) storage, (4) remobilization and (5) output phases. Phase 1 is mainly controlled by humans, phases 2–4 by fluvial processes, and phase 5 by both types of controls. We hypothesize that natural characteristics of fluvial systems and their modification by dam reservoirs and flood embankments construction are key controls on macroplastic storage and remobilization in rivers. The zone of macroplastic storage can be defined as a river floodplain inundated since the beginning of widespread disposal of plastic waste to the environment in the 1960s and remobilization zone as a part of the storage zone influenced by floodwaters and bank erosion. The amount of macroplastic in both zones can be estimated using data on the abundance of surface- and subsurface-stored macroplastic and the lateral and vertical extent of the zones. Our model creates the framework for estimation of how much plastic has accumulated in rivers and will be present in future riverscapes.

In recent years, the anticipation of sustainable commercial supersonic jet operations has elevated again. Advances in propulsion together with the increased usage of composite materials favour the potential of sustained and cost efficient supersonic commercial operations. However, obstacles remain with regards to the certification of the new supersonic aircraft platforms, while the two main certification bodies EASA and FAA are under pressure to develop certification requirements which will reassure that the supersonic operations are going to have the least possible environmental impact. From a design perspective, past and current research suggests that a trade-off exists between the aircraft performance and the environmental impact, which should be balanced. The current study attempts to balance this trade-off and to conceptually design a SuperSonic Business Jet (SSBJ) by taking into account environmental concerns of the supersonic flight together with design methods that facilitate a sustained supersonic cruise. An environmental impact assessment is undertaken for the SSBJ design and its results are compared to a typical commercial subsonic airliner.

Iron deficiency anemia (IDA) is highly prevalent in the Cote d’Ivoire, and has severe health and economic consequences. In this paper, we apply a health economic model to quantify the burden of IDA, and the contribution of nation-wide mandatory iron fortification of wheat flour and voluntary iron fortification of condiments to the reduction of this burden. The analysis for the population from six months to 64 years builds on published reviews and publicly available datasets, and is stratified by age-groups and socio-economic strata. Without the impact of these fortification strategies, the annual burden of IDA is estimated at 242,100 disability adjusted life years (DALYs) and 978.1 million USD. Wheat flour and condiment fortification contributed to a reduction of the IDA burden by approximately 5% each. In places with high prevalence of malaria and environmental factors, such as the Côte D’Ivoire, policy makers should combine nutritional intervention with infectious disease prevention and environmental factors. The findings of this study provide additional input for policy makers about the magnitude of the impact and can support the conception of future fortification strategies.

The node position information is critical in the wireless sensor network (WSN). However, the existing positioning algorithms commonly have low positioning accuracy because of noise interferences in communication. To solve this problem, this paper presents an iterative positioning model based on distance correction to improve the positioning accuracy of the target node in WSN. First, the log-distance distribution model of received signal strength indication (RSSI) ranging is built and the noise impact factor is derived based on the model. Second, the initial position coordinates of the target node are obtained based on the triangle centroid localization algorithm, thereby calculating the distance deviation coefficient under the influence of noise. Then, the ratio of the distance measured by the log-normal distribution model to the median distance deviation coefficient is taken as the new distance between the anchor node and the target node. Based on the new distance, the triangular centroid positioning algorithm is used again to calculate the target node coordinates. Finally, the iterative positioning model is constructed, and the distance deviation coefficient is updated repeatedly to update the positioning result until the set number of iterations is reached. Experiment results show that the proposed iterative positioning model can improve positioning accuracy effectively.

The IPAT equation provides a simple but powerful model for understanding sustainability, particularly from the challenge posed by the Anthropocene—how to reduce personal or societal impact. Impact is calculated by multiplying population, affluence and technology, and a ‘reduction coefficient’ e is used to explore targeted reductions in impact of different entities to cap total (summed) impact. The model offers two solutions. First, that all three factors are essential in determining total impact; a focus on just one or two is not justifiable without credibly addressing the other(s). Second, by presenting reduction of impact as a proportion of current activity, the solution becomes accessible to an individual actor (e.g., an individual, family, organization, or country). Application of the model is illustrated based on household weekly food consumption from cultures around the world. The model helps unify a) disparate perspectives on population, affluence and technology, which currently oppose one another from a basis of belief or dogma, and b) different sectors (e.g., food production, energy, climate impacts and others), as well as actors, so they can jointly identify strategies to resolve their contributions to approaching larger scale sustainability.

In 2014, the International Union for Conservation of Nature adopted the Red List of Ecosystems (IUCN RLE) criteria as the global standard for assessing risks to terrestrial, marine, and freshwater ecosystems. Identifying and quantifying the impacts of biodiversity assessments on the status of nature is key to justifying continued investment in assessments and enabling strategic planning to maximize future impact. In this policy perspective, we use an established impact evaluation framework to identify the impacts of the IUCN RLE since its inception. To date, 1,397 ecosystem units in 100 countries have been assessed following the IUCN RLE protocol. Systematic assessments are complete or underway in more than 25 countries and two continental regions (the Americas and Europe). Countries with established ecosystem red lists have already used them to inform legislation, land-use planning, protected area expansion, monitoring and reporting, and ecosystem management. IUCN RLE indices based on systematic assessments have high potential to inform global biodiversity reporting for the Aichi Targets and the United Nations Sustainable Development Goals. Expanding the coverage of IUCN RLE assessments, building capacity to undertake them, and establishing stronger policy instruments to manage red-listed ecosystems will be key to maximizing conservation impacts over the coming decades.

Impact load was applied to hardened cement paste (HCP) specimens using a gas gun to investigate microscopic changes in the specimens and develop a better response model of concrete subjected to impact load. Plasma emission was observed at the moment of impact at 420 m/s and the colour of the portion near the impact point turned brighter. This brighter portion was analysed, and it was observed that the pore structure was coarser compared to the other portion; however, the results of thermogravimetry and X-ray diffraction analysis were similar. A possible reason is that the generated heat was instantaneous and the rate of the temperature increase in the HCP decreased due to evaporation of water in the HCP. These results indicate that during impact at a few hundred m/s, porosity increase due to heat effect is more dominant than porosity decrease due to mechanical compaction.

Three-temperature heating systems consist of a heat engine and a heat pump, enabling thus maximum usage of the primary thermal source for the heating of buildings. This analysis has revealed obvious advantages and disadvantages that the combining of thermodynamic systems has in future development, also with respect to environmental and economic issues. It appears that the combination of a Stirling engine or a similar heat drive with a heat pump is especially suitable. In order to analyze the effectiveness of such a system, a comprehensive calculation procedure is used: its basis lies in accounting for all types of energy and their relationship to the original natural resource. The present paper aims to point out that the combination of Stirling engine and a heat pump is a useful solution thanks to the most favorable resultant economic impact if compared to the usage of a diesel, four-stroke gas, or, most commonly used, electric drive.

This article investigates if public investments in rural basic infrastructure represent the best strategy for boosting the local economy of rural communities from Romania. The article focuses on one specific program implemented under the Cohesion policy in the framework of the National Plan for Rural Development called Measure 322. Geographically, the research included a sample of rural communes from the North-Western Region of Romania. Moreover, the study also looks at other determinants of local economic development (LED) than infrastructure investments, with a focus on certain feature characterizing Romanian rural communities such as population size, isolation from urban centers, connection with European and national roads networks, educational stock, etc. The research included three steps, namely the construction of the LED Index, a cvasi-experimental research, and a regression model. Our main findings seem to suggest that while investments in infrastructure help the development gap between beneficiaries and non-beneficiaries remains relatively the same. In terms of determinants of LED, percentage of population with a university degree and connection to a European road are the most significant in the Romanian rural context.

Researchers, journals, and universities want to receive more citations for their scholarly publications. However, a paper citations depend on its quality, visibility and author’s online profile. Research support documents (unpublished papers, white papers, project reports, datasets, software, posters, online resources and teaching materials) can be additional source for increasing the author’s visibility. To enhance research visibility and impact, the full range of scholarly output should be available online on the open access platform. With open access platform, key research findings are made accessible immediately to the scientific community. Therefore, the publicly available research support documents may result in receiving more citations in addition to the published papers. In this paper we conducted a simplified three stages study on the benefits of research support documents publications on open access platform. We also elaborated on approaches of improving your research visibility and impact through these document.

Hail causes damage to property, including roofs, automobiles, and crops, with an average annual loss of $850 million. In residential structures, tile roofing systems are common in the southern U.S. due to their resistance to hail impact and long service life. Additionally, the commercial buildings and some portions of the residential structures have low-sloped or flat roof systems. Commercial low-slope roof systems are equally prone to hail-strike damages as steep residential roof systems. The objectives of this paper are to present a literature review, inspection protocol, and case studies on a comparative assessment of hail threshold for built-up roof (BUR) and tile roof (TR) systems. The published papers determining the hail impact assessment of different roofing systems from 1969 through 2023 were studied and analyzed. This study develops a comparative hail damage assessment table between BUR and TR systems, and the hail threshold for various built-up roof composition systems. In addition, the different failure modes and their causes, the characteristics of hail impacts, and the variables influencing the impact resistance of these roofing systems were examined using field studies. To better understand the effects, it is recommended that an intelligent model be developed to predict the hail resistance threshold of various configurations of BUR and TR systems with critical variables.

Thermal Non-destructive Testing and Evaluation (NDT&E) is crucial in ensuring the quality and safety of industrial materials, components, and structures. It serves as a key tool for assessing their operational reliability, thus enhancing safety in a wide range of industries. There is a growing demand for dependable, swift, remote, and secure inspection and assessment techniques to detect hidden flaws, especially for sustainable solutions prompts adjustments in design and manufacturing standards. Hidden defects often emerge during the service life of these materials and structures due to various stress factors, potentially resulting in catastrophic failures. This study delves into the optimal and dependable experimental method for conducting fast, remote, and secure inspections and assessments of carbon fiber reinforced polymer materials using Infrared Imaging (IRI) as part of Thermal Non-Destructive Testing and Evaluation (TNDT&E). Additionally, it examines the post-processing approach associated with this technique. This perspective also sheds light on the current state-of-the-art infrared imaging methods employed in TNDT&E, emphasizing their strengths and weaknesses about their ability to detect subsurface defects present within the material Most of the methods discussed in previous research primarily focus on the thermal differences in specific areas of a sample using processed thermal images, even though these images come from analyzing a series of images captured over time. This study highlights the latest research in thermal/infrared non-destructive testing and evaluation, along with the related post-processing techniques. It aims to not only show hidden subsurface defects through thermal differences also provides information about how these defects change over time.

This paper defines the two main causes of global warming in the UK and seeks to cut climate change using green hydrogen made from renewable electricity sources. Combustion vehicles powered by fossil gasoline and diesel emit a third of UK climate-warming CO2 while buildings heated by natural gas provide a quarter. First, current UK grid problems are defined: Electricity grid, gas grid and petroleum grid. Then experiments on the private energy community of Keele University allow electrolysis demonstrations producing green hydrogen for buildings and vehicle refueling. Next, the model supply chain is planned and tested. Finally, experiments and calculations are outlined, analyzing the optimum system design criteria proposed. We conclude that economic green hydrogen can displace diesel and gasoline in vehicle transport, while also displacing natural gas for combined heat and power in buildings. In addition, the prospect in 2023 is that profits can now be made all along the green hydrogen supply chain, such that new businesses involved in clean communities can beat the National Grid monopoly and other large dominant fossil grid companies.

The solution of structural problems with nonlinear material behaviour in a model order reduction framework is investigated in this paper. In such a framework, greedy algorithms or adaptive strategies are interesting as they adjust the reduced order basis (ROB) to the problem of interest. However, these greedy strategies may lead to an excessive increase in the size of the reduced basis, i.e. the solution is no more represented in its optimal low-dimensional expansion. Here, an optimised strategy is proposed to maintain, at each step of the greedy algorithm, the lowest dimension of the PGD basis using a randomised SVD algorithm. Comparing to conventional approaches such as Gram-Schmidt orthonormalisation or deterministic SVD, it is shown to be very efficient both in terms of numerical cost and optimality of the reduced basis. Examples with different mesh densities are investigated to demonstrate the numerical efficiency of the presented method.

Background: Osteoclastic bone resorption in the compression zone of periodontal ligament (PDL) plays a role in orthodontic tooth movement, and is regulated by the balance of RANKL and OPG. Compression downregulates OPG, conversely, tension upregulates OPG in PDL cells. However, the regulatory mechanism of OPG expression in PDL cells under different mechanical stresses remains unclear. Methods: To study microRNA (miRNA) expression profiles, compression (2g/cm²) or tension (15%-elongation) was applied to immortalized human PDL (HPL) cells, and miRNA was extracted. The miRNA expression was analyzed using a human miRNA microarray, and the changes of the miRNA expression were confirmed by real-time RT-PCR. In addition, miR-3198-mimic and -inhibitor were transfected into HPL cells to understand the resulting OPG expression and production. Results: Certain miRNAs were expressed differentially under compression and tension. Some miRNAs including miR-3198 were upregulated only by compression. Real-time RT-PCR confirmed that compression induced miR-3198, but tension reduced it, in HPL cells. miR-3198-inhibitor upregulated and miR-3198-mimic reduced OPG in HPL cells. miR-3198-inhibitor rescued the compression-mediated downregulation of OPG. On the other hand, miR-3198-mimic reduced OPG expression under tension. Conclusion: We conclude that miR-3198 is upregulated by compression and is downregulated by tension, suggesting that miR-3198 downregulates OPG in response to mechanical stress.

It is strongly desirable to accurately detect the clouds in hyperspectral images onboard before compression. However, conventional onboard cloud detection methods are not appropriate to all situation such as shadowed cloud or darken snow covered surfaces which are not identified properly in the NDSI test. In this paper, we propose a new spectral–spatial classification strategy to enhance the orbiting cloud screen performances obtained on hyperspectral images by integrating threshold exponential spectral angle map (TESAM), adaptive Markov random field (aMRF) and dynamic stochastic resonance (DSR). TESAM is performed to classify the cloud pixels coarsely based on spectral information. Then aMRF is performed to do optimal process by using spatial information, which improved the classification performance significantly. Some misclassification points still exist after aMRF processing because of the noisy data in the onboard environment. DSR is used to eliminate misclassification points in binary labeling image after aMRF. Taking level 0.5 data from hyperion as dataset, the average overall accuracy of the proposed algorithm is 96.28% after test. The method can provide cloud mask for the on-going EO-1 images and related satellites with the same spectral settings without manual intervention. The experiment indicate that the proposed method reveals better performance than the classical onboard cloud detection or current state-of-the-art hyperspectral classification methods.

This study presents a comprehensive examination of the transformative potential of Islamic finance in advancing sustainable development goals (SDGs). It underscores the unique position of Islamic finance, with its ethical and moral foundations, to contribute significantly to environmental sustainability, social equity, and economic development. The paper highlights innovative financial instruments like Zakat, Waqf, and green Sukuk, which not only align with but also actively promote SDGs. Through a multidisciplinary approach, it advocates for a paradigm shift towards integrating sustainability into the core of financial systems. The analysis includes challenges in harmonizing Human Development Indexes (HDIs) with Ecological Footprints (EFs), proposing strategies for sustainable development, ecological conservation, and educational reforms. This study is pivotal for policymakers, financial institutions, and educators, providing a roadmap for leveraging Islamic finance towards achieving a balanced, sustainable, and inclusive global economy.

Of the 100,000 railroad bridges in the United States, 50% are over 100 years old. Many of these bridges do not meet the minimum vertical clearance standards, making them susceptible to impacts from over-height vehicles. Impacts can cause structural damage and unwanted disruption to railroad bridge services; rapid notification of the railroad authorities is crucial to ensure that the bridges are safe for continued use and to affect timely repairs. Therefore, researchers have developed approaches to identify these impacts to railroad bridges. Some recent approaches use machine learning to more effectively identify impacts from the sensor data. Typically, the collected sensor data is transmitted to a central location for processing. However, the challenge with this centralized approach is that the transfer of data to a central location can take considerable time, which is undesirable for time-sensitive events like impact detection that require rapid assessment and response to potential damage. To address the challenges posed by the centralized approach, this study develops a framework for edge implementation of machine learning predictions on wireless smart sensors. Wireless sensors are used because of their ease of installation and lower costs compared to their wired counterparts. The framework is implemented on the Xnode wireless smart sensor platform, thus bringing artificial intelligence models directly to the sensor nodes and eliminating the need to transfer data to a central location for processing. This framework is demonstrated using data obtained from events on a railroad bridge near Chicago; results illustrate the efficacy of the proposed edge computing framework for such time-sensitive structural health monitoring applications.

The impact of scientific articles is often measured using metrics such as the Journal Impact Factor (JIF) and CiteScore, which rely on citation counts and publication volume. In this study, we aimed to identify the predictors of article impact in the leading solid organ transplantation journals from 2019 to 2020. Article impact was determined using its citation count in 2021 compared to the JIF. Statistical analysis was performed using IBM SPSS Statistics to identify significant predictors of positive impact on the JIF. A total of 2,461 articles and reviews were included, with variations observed among the top transplantation journals. Factors such as the number of authors, open access publishing, and authors from top affiliations were found to significantly influence the impact of articles. Articles discussing kidney transplantation and COVID-19 were associated with a positive impact on the JIF, while those discussing lung transplantation had a negative impact. The findings suggest that collaborative research with more authors and involvement of top institutions enhances impact. Open access publishing also correlated with increased citations and a positive impact on the JIF. Further research incorporating a broader range of journals and years would provide a more comprehensive understanding of factors influencing article impact.

Warsaw is among European cities with the worst atmospheric air quality, mainly due to very high pollution emitted by the residential sector and road traffic. This results in high concentrations of particulate matter and nitrogen oxides, often exceeding WHO standards. The paper discusses the current and expected effects of actions taken by the Warsaw authorities, to significantly improve air quality in the city. The Clean Air Program currently implemented mainly involves the reduction, and ultimately the total elimination, of coal combustion in all heat sources of the municipal sector, which is identified in numerous publications as the main source of air quality degradation in cities. The program's goal, which timeframe covers the years 2018-2029, is a definite reduction in particulate pollution. The second part of the remedial activities, covering the years 2024-2034, mainly concerns the reduction of nitrogen oxide pollution, the main source of which is urban road traffic. In the latter case, the expected effects of introducing Low-Emission Zone (launched July 2024) in the city center are considered. According to the project, the zone's implementation will consist of five two-year stages, in which the car emission limits will gradually tighten. The paper compares the effectiveness of two being considered versions, differing in size zones.

Over the past thirty years, the red gorgonian Paramuricea clavata in the Mediterranean Sea has faced increasing threats, including heat waves and human activities such as fishing and diving. Epibiosis on damaged gorgonian colonies is generally used as an indirect indication of stressed conditions. The density and height of P. clavata and the percentage of colonies affected by epibiosis and entangled in lost fishing gear were studied to investigate the phenomenon and its trend over time in the Ligurian Sea. Analyses were based on transects collected during ROV campaigns between 2015 and 2022 at depths of 33-90 meters. A strong correlation was observed between fishing effort in the study area and the level of epibiosis. Maximal percentages of colonies affected by epibiosis and entanglement were recorded at depths of 50-70 meters. Temporally, marine heat waves before 2019 were identified as the primary cause of damage to P. clavata. The decrease in epibiosis percentages after 2019, despite the 2022 heat wave, may be due to a quick recovery ability of the populations and a reduction in fishing activities during the COVID-19 lockdown in 2020. Long-term monitoring programs are essential to understand the changes in marine benthic communities exposed to different stressors.

Brazil has ideal conditions for the large-scale use of cabotage cargo transportation: a vast coastline with almost 7,400 km, approximately 70% of the population resident in a coastal range of up to 200 km from the coast and a strong concentration of activities economic along the coast. However, there is an absolute domain of road modal for the transportation of goods, and cabotage is underused. The purpose of the study was to raise the main barriers that negatively impact the performance of Brazilian cabotage. To this end, it was used to bibliographic and documentary research, based on studies already published in journals, doctoral theses, master's dissertations, congress annals, technical reports and research on government-related government agencies sites, navigation companies and entities related to cabotage. The main barriers that contribute to the low use of cabotage in Brazil were identified and analyzed, as well as possible alternatives of solution for sustainable development of this mode of transport. Such a study will certainly serve as subsidies for the definition of public policies aimed at better use of Brazilian cabotage, as well as to encourage navigation companies to invest more in the transport of goods by cabotage, in order to contribute to the reduction of trucks on highways Brazilian and for environmental preservation.

The Lower Mekong Basin has had extensive hydropower dam development, which changes hydrologic conditions and threatens the exceptional aquatic biodiver-sity. This study quantifies the degree of hydrologic change between pre-impact (1965-1968) and post-impact (2018-2021) peak hydropower development in two major tributaries of the Lower Mekong Basin, the Sekong River with the fewest dams and the Sesan River with the most dams. Both rivers historically supported migratory fishes. We use daily pre- and post-impact data and the Indicators of Hydrologic Alteration framework to evaluate streamflow changes from dam development. We found signifi-cant changes in low and high magnitude flows in the pre- and post-impact periods of dam development. For the Sekong River, minimum flow had large fluctuations that ranged 290% to 412% more than the pre-impact period, while the Sesan River ranged 120% to 160% more than pre-impact. Dry season flows increased by 200±63% on av-erage in the Sekong River, which is caused by releases from upstream dams. Mean-while, Sesan River dry season flows increased by 100±55% on average. This study in-dicates that seasonal flow changes and extreme flow events occurred more frequently in the two basins following dam construction, which may threaten the ecosystem func-tions.

Membrane gas absorption technology has been considered as a promising approach to mitigate CO2 emissions from power plants. The aim of this study is to evaluate the environmental impacts of CO2 absorption and desorption processes by hollow fiber membrane contactors using life cycle assessment methodology. On the basis of ReCipe 2016 Midpoint and ReCipe 2016 Endpoint methods, the research results show that, membrane gas absorption system exhibits the lowest environmental impacts across the majority assessed categories in comparison with chemical absorption and membrane gas separation systems. The CO2 capture process via membrane gas absorption has the most significant impact on METP category, with heat consumption as the primary contributing factor accounting for 55%, followed by electricity consumption accounting for 43.1%. According to the sensitivity analysis, heating by natural gas shows a better performance than other heat supply sources in improving overall environmental impacts. In addition, the increasing utilization of renewable energy in electricity supply reduces the global warming potential, fossil resource consumption and ozone formation.

The growing urgency for sustainable energy solutions necessitates a deeper understanding of the environmental impacts of renewable technologies. This article aims to synthesize and analyze Life Cycle Assessments (LCA) in this domain, providing a comprehensive perspective. We systematically categorize 2,923 articles into four communities: (1) Photovoltaic systems, (2) Wind energy systems, (3) Materials for auxiliary industry of photovoltaic and wind systems, and (4) Solar thermal systems. A comparative analysis is conducted to identify methodological consistencies and disparities across these communities. The findings reveal diverse methodological approaches and a range of environmental impacts, highlighting the complexities in assessing renewable energy systems. The article underscores the significance of material selection in photovoltaic and wind systems, providing a critical overview of the current state of LCA research in renewable energy and stressing the need for standardized methodologies. It also identifies gaps in recent research, offering insights for future studies focused on integrating environmental, economic, and social considerations in renewable energy assessments.As a case study, an LCA was used to evaluate two energy supply methods for a sensor network: one connected to the public grid and another powered by a photovoltaic panel. The off-grid system, while more environmentally friendly by reducing reliance on non-renewable energy sources, posed challenges due to the high environmental impact of battery production and disposal. Integrating environmental assessments provides a robust framework for making informed decisions on sustainable technologies. The findings are critical for projects that balance technological needs with sustainability goals.

This paper aims to provide an evaluation of how Value Added Tax (VAT) policy alterations influence market liquidity, trading volume, and stock performance. To fill the existing literature gap on the direct effect of (VAT) adjustments on stock market dynamic, particulate within the banking industry. The study employs an event study methodology to analyse the immediate and medium-term effects on bank stocks listed in markets subject to a (VAT) adjustments. The core of the study analysis is anchored around two pivotal events, the initial application of (VAT) on 1st January 2018, and the subsequent (VAT) increase to 15% on 1st July 2020 using MATLAB R2022b. The study analysis encompasses the period immediately before and after the introduction and subsequent increase (VAT) in kingdom Saudi Ariba (KSA) employing an eleven sample comprises the (KSA) largest banks with a ±7 days window period from the event. The analysis revels that the imposition of 5% (VAT) lead a substation downturn in trading volume and stock returns of 9.5%, and 39.5%, subsequently. While when the (VAT) was increased by 15% the market exhibited a mixed but ultimately positive response of 3.3% trading volumes increases and 128.7% average stock return recovery.

Emergence of COVID-19 had profound impact on global stock markets, including Indian mar-ket. Key indices like NIFTY50 and Sensex dropped by approximately 40% within two months in 2020, which also affected major mutual funds, leading to significant depreciation of their Net Asset Value. Securities and Exchange Board of India (SEBI) allows mutual funds to use deriva-tives for hedging purposes, capped at 100% of the scheme's net assets covering debt, equity, and derivatives. However, circular amendment by SEBI in January-2019 permitted covered call strat-egies on constituent stocks of Sensex and NIFTY50 for mutual fund schemes, excluding ETFs and Index Funds. This study investigated whether mutual funds increased their derivative us-age as risk mitigation strategy during COVID-19 pandemic, analyzing derivative holdings from 2019-2023. Surprisingly, findings indicated a decline in derivative holdings in 2020 compared to pre-pandemic levels. Statistical tests and performance evaluation metrics such as T-test, F-test, Treynor Ratio, Sharpe Ratio, and Jensen's calculations were employed to assess mutual fund performance. Although derivative-holding mutual funds didn't outperform benchmarks in aver-age returns, it showcased significantly reduced volatility, offering investors favorable risk-return trade-offs. research sheds light on derivative utilization in Mutual Fund industry, potentially in-forming regulators, fund managers, and investors in their decision-making

This paper undertakes a comprehensive review to underscore the central role of sustainability in the evaluation and innovation of jet grouting technologies. It meticulously traces the evolution of evaluation methodologies, emphasizing the imperative of sustainable practices throughout history. Traditional evaluation paradigms are examined alongside contemporary trends, with a particular focus on sustainability metrics and visualization techniques. Through an examination of innovative jet grouting technologies, this paper illustrates how sustainability principles have driven advancements aimed at improving the efficiency and environmental impact of jet grouting methods. Central to this review is an assessment of sustainability across multiple dimensions, including method applicability, installation and operational compatibility, and the performance of the resulting jet grouted piles. By emphasizing sustainability considerations, the paper highlights the intrinsic link between environmental integrity and technological innovation in the field of jet grouting. In addition, it discusses analytical evaluation methods designed to proactively address sustainability concerns prior to construction, thereby promoting a more environmentally responsible approach. Finally, this paper presents a pioneering evaluation framework that integrates real-time monitoring and visualization tools, allowing stakeholders to track sustainability milestones throughout the construction process. By emphasizing sustainability as a guiding principle, this review advocates for a paradigm shift toward more ecologically sound and resilient jet grouting practices.

Quantifying different stocking rates effects in three study areas placed at Mediterranean forest (Cuenca, Spain) was conducted by applying a multiparametric soil quality index, SQI, developed in undisturbed forest soils (> 40 years). The main objective is to advance in the development and application of multiparametric indexes which allow for soil condition assessment. For it, is analyse the effectiveness of a multiparametric soil quality index (SQI) as an indicator livestock impacts on the soil in mediterranean forests. Control areas without stocking rates were compared in forest stands with different age (Thicket forest stand, < 30 years; High polewood forest stand, 30-60 years; Old growth forest stand, > 60 years); with various intensity grazing areas (permanent livestock passage: inactive sheepfold for 2-3 years, and active sheepfold; intermittent livestock passage: bare soil, pine stand, scrubland). The multiparametric soil quality index (SQI) applied sensitive to changes in forest ecosystems depending of different stocking rates. However, for even more preci-sion to assess cattle alteration, multiparameter index recalibrated, creating a new one; Soil Status Index by Livestock (SSIL). Correlation between quality ranges obtained with both indexes in dif-ferent study areas suggest that SSIL can be considered a livestock impact reference indicator in Mediterranean forest soils.

Heavy metal pollution poses a significant threat to global populations, particularly impacting human health. Developing countries, characterized by chemical engineering and mining industrial activities, often contribute to diverse heavy metal contaminants. Consumption of water contaminated with heavy metals, prevalent in such regions, can lead to severe health risks, including gastric cancer. Addressing the urgent issue of heavy metal pollution, this paper employs a bibliographic approach to explore the latest literature on heavy metal pollution. The study discusses recent research findings and potential methods for the treatment and mitigation of heavy metal pollution, emphasizing the pressing need for effective solutions to safeguard public health.

This research investigates the fatigue crack propagation on the lower surface of rocket deflector troughs of offshore rocket launch platforms. Initially, a numerical model of the offshore rocket launch platform is established using ABAQUS based on the Extended Finite Element Method (XFEM). Subsequently, two variable parameters—namely, the initial crack length and initial tilt angle—are introduced. This research systematically analyzes the impact of these parameters on fatigue crack propagation patterns in both the maximum stress and maximum deformation regions of the deflector channels under the combined conditions of high temperature and impact. Finally, the research indicates that the propagation length of surface cracks in the deflector trough exhibits a trend of initial increase followed by a subsequent decrease with the increase in the preset inclination angle. Notably, the stable propagation rate of the crack in the region of maximum deformation surpasses that observed in the region of maximum stress. Through meticulous comparative analysis, it is evident that temperature loading significantly fosters the initiation and propagation of cracks, particularly in the upper region of the deflector channel's lower surface.

This review explores the transformative impact of sensor technologies in early disease detection. It highlights recent advancements in nanotechnology-based sensors, particularly focusing on their applications in identifying disease biomarkers at early stages. The integration of these sensors with artificial intelligence for predictive analytics in healthcare is also discussed. Applications in cancer, infectious diseases, and chronic disease management underscore their diverse utility. Challenges in sensor technology adoption and future directions, including multiplexed sensors and wearable devices, are examined. This review underscores sensors' potential in enhancing disease management and patient outcomes.

Microplastic contamination, defined as plastic particles less than 5 mm in size, has become a major global environmental concern. This study synthesizes findings from carefully chosen studies undertaken in a variety of geographical areas and ecosystems, offering light on the multifaceted issues posed by microplastic pollution. These articles show the global prevalence of microplastics in both land and marine ecosystems. Seasonal fluctuations in microplastic abundance highlight the cyclical nature of this pollution, with larger amounts being reported during the summer months. Tourism, industrialization, and urbanization have all been highlighted as significant contributors to microplastic contamination, stressing the impact of man-made influences. Wastewater treatment plants (WWTPs) have been identified as hotspots for microplastic release into aquatic habitats, emphasizing the need for enhanced treatment procedures. Because microplastics can build up in the food chain, it underlines the possible health problems connected with microplastic pollution for both aquatic creatures and human consumers. Longitudinal studies, geographical variety, in-depth health and ecological impact evaluations, standardization, and effective mitigation methods should be prioritized in future studies. To address this worldwide issue, interdisciplinary collaboration among scientists, health professionals, politicians, and industrial stakeholders is required.

The broad and rapid application of new genomic techniques (NGTs) such as CRISPR-Cas has led to a fast increase in the number of genetically modified crops. With the recently published EU Commission’s (EC) regulatory proposal on plants generated with NGTs (July 5, 2023) the process of admission of such genetically modified plants is aimed to get accelerated and simplified. NGT plant applications shall be categorized based on their molecular characteristics into category 1 NGT (NGT1) and category 2 NGT (NGT2), which is in divergence from the current legislation centered around Directive 2001/18/EC. In the regulatory proposal NGT2 plants are envisioned to undergo a reduced risk assessment while for NGT1 plants no risk assessment is foreseen at all. To demonstrate were the path of the proposal leads to in practice, we applied the proposed criteria for categorization to a list of NGT plant applications that are currently in the commercialization pipeline. A key finding is that out of those plant applications affected by the EC proposal, 94% would be classified as NGT1 and thus would receive a market approval without risk assessment, monitoring and sufficient labeling provisions. The remaining 6% of applications would be classified as NGT2 plants for which, in deviation from the current regulation, an adapted risk assessment is proposed. A screening of intended traits in the pipeline highlights that certain NGT1 plants can pose similar environmental risks (e.g. invasiveness) compared to other genetically modified organisms (GMOs), as defined in Directive 2001/18/EC. For example, NGT1 applications based on RNAi technology can exhibit insecticidal effects with potential side effects on non-target organisms (i.e. other insects). Our quantitative and case-specific elaboration on how the current EC regulatory proposal would affect the environment, health or consumer protection will be informative for decision makers and politicians.

In many ports, the ship's speed is limited for the safety of navigation. At the same time, ship captains and port pilots choose the speed of the ship, but not higher than the permitted speed of the ship in the port, therefore the speed of the ship also depends on the experience of the ship captains and port pilots and the sailing conditions of the ship in specific conditions. Choosing the optimal speed of ships in port, including the effect of shallow depth, can reduce fuel consumption and ship emissions in ports, which is important for the development of green and sustainable ports. In all cases, shipping safety is the highest priority. The main objectives of the article are determining the optimal speed of ships in ports with low clearance, ensuring navigational safety, reducing fuel consumption and emissions, and at the same time creating a sustainable port. The article presents the methodology of optimal ship speed calculation, minimum ship controllable speed maintenance, fuel consumption and emission reduction methodology and their impact on sustainable and green maritime transport and port development. The developed methodology was tested on real ships and with the help of a calibrated simulator, sailing through harbor channels and harbor waters in low clearance conditions.

This research delves into the intricate dynamics underlying the impact of investments on global output, em-ploying the Leontief matrix as a robust analytical framework. Investments wield a profound influence on economies worldwide, with varying effects contingent upon investment types, development levels of coun-tries, and external factors such as trade conflicts and global shocks. The diverse range of investment forms, including physical capital, human capital, R&D, and technological investments, engenders distinct implica-tions for productivity, innovation, and efficiency. Developing and developed economies navigate unique tra-jectories, with investments playing a pivotal role in bridging infrastructure gaps, improving technology, and spurring growth. However, external disruptions, such as trade wars and global shocks, introduce an element of complexity, reshaping investment patterns and altering global output trajectories. This study centers on harnessing the Leontief matrix's prowess to evaluate the interplay of investments and global output, focusing on the Romanian economy. By analyzing input-output tables, encompassing 105 branches aggregated into 10 sectors, the research captures the intricate connections between economic segments. No-tably, the Romanian context reveals the volatility of the matrix coefficients', an outcome of ongoing transi-tional processes, technological advancements, and fluctuating relative prices. In unraveling the intricate threads weaving investments and global output, this study contributes to a nuanced comprehension of these multifaceted interactions. The findings underscore the significance of tailoring investment strategies to specific economic contexts and advocate for robust frameworks, such as the Leontief matrix, to inform pol-icy decisions and drive sustainable growth in an increasingly complex global economy.

In order to reduce the silique shattering loss of rapeseed mechanical harvesting process, based on the state of force on the silique during rapeseed harvesting reel branch, Ningza 1810, Zhenyou 8 and Fengyou 306 were used as research objects, and the experimental research on the factors affecting rapeseed siliques shattering was carried out using the swing impact method. The experimental analysis showed that: rapeseed varieties, silique moisture content, silique growth position, collision material, impact speed, force position and other factors had significant effects on silique shattering. The impact velocity was less than 1.5m·s-1, the difference on the effect of each factor on pod-shattering was not significant, it was not easy to shatter when the moisture content of rapeseed silique was higher. The impact resistance of the front side of rapeseed was 2 to 4 times that of the bonding surface of rapeseed petals, the shattering rate of the top rapeseed silique was twice that of the bottom siliques, when siliques were supported, they were more likely to shatter under external forces than when they were unsupported. The experimental study of the mechanical properties of rapeseed siliques was carried out using the impending fracture method, the experimental analyses showed that the support position and force position of the silique, the loading speed and the growth position of the silique had a significant effect on the mechanical properties of the silique. The maximum cracking force was higher and bending strength was stronger when the body of the silique was supported, which the range of the maximum cracking force were 3.05N to 4.16N, and the bending strength range were 8.48 MPa to 11.57 MPa. The maximum cracking force and bending strength of the silique was stronger when the front side of the silique petal was pressurized than when the bonding surface of the petal was pressurized. Based on Pearson's correlation and grey correlation analysis, the morphological characteristics of rapeseed siliques were ranked in order of their influence on the performance of siliques in terms of the angle between silique and stalk, stalk diameter, petal thickness, beak length, silique thickness, silique width and silique length. This study can be used as a reference for the design and optimization of the rapeseed harvesting reel branch mechanism and the selection of machine harvestable rapeseed varieties.

Magnetorheological elastomers (MREs) are a type of smart material that can change their mechanical properties in response to external magnetic fields. These unique properties make them ideal for various applications, including vibration control, noise reduction, and shock absorption. This paper presents an approach for modeling the impact behavior of MREs. The proposed model uses a combination of exponential functions arranged in a multi-layer Preisach model to capture the nonlinear behavior of MREs under impact loads. The model is trained using particle swarm optimization (PSO) and validated using experimental data from drop impact tests conducted on MRE samples under various magnetic field strengths. The results demonstrate that the proposed model can accurately predict the impact behavior of MREs, making it a useful tool for designing MRE-based devices that require precise control of their impact response. The model's response closely matches the experimental data, with a maximum prediction error of 10% or less. Furthermore, the interpolated model's response shows good agreement with the experimental data, with a maximum percentage error of less than 8.5%.

The assessment of an organization/product's environmental footprint is based on the protocols developed by the Joint Research Centre of the European Union, which take into account 16 impact categories. Among the categories covered are toxicity to freshwater ecosystems and to humans. Standard protocols use only chemical parameters as input data, preventing the true impact of entire complex mixtures, such as emissions discharged into the environment, from being determined. Biological assays allow us to bridge this gap: in the current study, assays were used to determine baseline toxicity towards aquatic organisms (green algae, luminescent bacteria, and crustaceans) as well as specific toxicity (mutagenicity and carcinogenicity). Expected impacts were compared using two approaches (standard and bioassay-centered results obtained are not always in line and, in general, the traditional method underestimates impacts). This demonstrates the importance of these assays and suggests that they be used in LCA (Life Cycle Assessment) protocols as well.

The Impact Chain framework for risk assessment has proven to be a robust and effective It is very useful to set up the conceptual framework associated to a given risk and allows accommodating naturally the different components that shape that However, the operationalization of the impact chain may not be straightforward, in particular due to the inherent uncertainties associated to the selected indicators and the assigned In this paper, we introduce an extension to the Impact Chain framework that allows to consider uncertainties in the different components of the risk In the framework of the UNCHAIN project, a web-based tool has been developed to ease the task of implementing that The tool has been applied to a case study on the loss of tourist attractiveness due to heat stress conditions on the Balearic island, Spain, to illustrate how uncertainties in different components of the impact chain can affect the robustness of the final risk Also, the tool provides an estimate of the sensitivity of the final risk to each component, which can be used to guide risk mitigation Finally, a proposal for the validation of the risk assessment is presented.

The effective management of Fusarium wilt of bananas (FW) depends on the knowledge of the disease dynamics in time and space. The objectives of this work were: To estimate disease intensity and impact, and to investigate the spatial and temporal dynamic of FW. Fields planted with Silk (n = 10), Pome (n = 17) or Cavendish (n = 3) banana subgroups were surveyed in Brazil, totaling 95 ha. In each field, all plants were visually assessed and diseased plants were georeferenced. The incidence of FW and the impact of the disease on yield on a regional scale were estimated. Spatial patterns were analyzed using quadrat- and distance-based methods. FW incidence ranged from 0.09 to 41.42%, being higher in Silk fields (median = 14.26%). Impacts of epidemics on yield ranged from 18.4 to 8,192.5 kg.ha-1.year-1, with a median of 935.2 kg.ha-1.year-1. The higher economic impact of the disease was observed on Silk cultivar with a median loss of US$ 910.5 ha-1.year-1. Overall, estimated losses increased on average by US$ 109.8 ha-1.year-1 at each 1% of incidence. Aggregation of FW was detected by all analytical methods in 13 fields (1 of Cavendish, 11 of Pome and 1 of Silk). In the other 17 fields, at least one analytical method did not reject the null hypothesis of randomness. One field (5 ha), composed of six plots, was selected for spatial and temporal studies during two years with bi-monthly assessments. A sigmoidal curve represented the FW progress and the Gompertz model best fitted disease progress. The level of aggregation varied over time, and evidence of secondary infection to neighboring and distant plants were detected. FW is a widespread problem in Brazil and yield losses can be of high magnitude. Epidemiology-based management strategies can now be better established.

This study addresses the causal links between external factors and the main hydro-climatic variables. There is a gap in the literature on the description of a complete chain in addressing the structures of direct causal links of solar activity on the terrestrial variables. This is why, the present study uses the extensive facilities of the application of information theory in view of recent advances in different fields. Also, by other methods (e.g. neural networks) first are tested the existence non-linear links of solar-terrestrial influences on hydro-climate system. The results are promising related to the solar impact on terrestrial phenomena which is discriminant in space-time domain. The implications prove robust for determining the causal measure of climate variables under direct solar impact which makes it easier to consider solar activity in climate models, by appropriate parametrizations. This study found that hydro-climatic variables are sensitive to solar impact only for certain frequencies (periods) and these have a coherence with the Solar-Flux only for some lags of the Solar-Flux (in advance).

The 2019-2020 summer wildfire event on the east coast of Australia was a series of major wildfires occurring from November 2019 to end of January 2020 across the states of Queensland, New South Wales (NSW), Victoria and South Australia. The wildfires were unprecedent in scope and the extensive extend of the wildfires has caused smoke pollutants transported not only to New Zealand but across the Pacific Ocean to South America. At the height of the wildfires, smoke plumes were injected into the stratosphere at height up to 25km and hence transported across the globe. Based on meteorological and air quality simulation using WRF-Chem model, air quality monitoring data collected during the bushfire period and remote sensing data from MODIS and CALIPSO satellites, the extend of the wildfires and the pollutant transport, and their impacts on air quality and health on exposed population in NSW can be analysed. The results showed that WRF-Chem model using Fire Emission Inventory from NCAR (FINN) predicts the dispersion and transport of pollutants and the predicted concentration of PM2.5 and other pollutants from wildfires reasonably well when compared with ground-based and satellite data. The impact on health endpoints such as mortality, respiratory and cardiovascular diseases hospitalisation across the modelling domain is then estimated. The estimated health impact is comparable with previous study based only on observation data, but the results in this study provide much more detailed spatially and temporally with regards to the health impact from the 2019-2020 wildfire.

Dust storms originating from Central Australia and western New South Wales frequently cause high particles concentration at many sites across New South Wales, both inland and along the coast. This study focussed on a dust storm event in February 2019 which affect air quality across the state as detected at many ambient monitoring stations in the Department of Planning, Industry and Environment (DPIE) air quality monitoring network. The WRF-Chem (Weather Research and Forecast Model – Chemistry) model is used to study the formation, dispersion and transport of dust across the state of New South Wales (NSW, Australia). Wildfires also happened in northern NSW at the same time of the dust storm in February 2019, and their emissions are taken into account in WRF-Chem model by using Fire Inventory from NCAR (FINN) as emission input. The model performance is evaluated and is shown to predict fairly accurate the PM2.5 and PM10 concentration as compared to observation. The predicted PM2.5 concentration over New South Wales during 5 days from 11 to 15 February 2019 is then used to estimate the impact of the February 2019 dust storm event on three health endpoints namely mortality, respiratory and cardiac diseases hospitalisation rates. The results show that even though as the daily average of PM2.5 over some parts of the state, especially in western and north western NSW near the centre of the dust storm and wild fires, are very high (over 900 µg/m3), the population exposure is low due to the sparse population. The top five Statistical Area Level 4 regions with the most impact in term of mortality, respiratory diseases hospitalisation and cardiac disease hospitalisation are Far West and Orana, Newcastle and Lake Macquarie, New England and North West, Sydney – Inner South West and either Central Coast (mortality) or Sydney – Parramatta (respiratory diseases hospitalisation) or Sydney – Inner West (cardiac diseases hospitalisation). Generally, the health impact is similar in order of magnitude to that caused by biomass burnings events from wildfires or from hazardous reduction burnings (HRBs) near populous centres such as in Sydney in May 2016. One notable difference is the higher respiratory diseases hospitalisation for this dust event (161) compared to fire event (24).

Context: COVID-19 pandemic and the Lockdown implemented as a measure to contain the virus spread has taken a toll over the psychological well-being of the people especially the young adults, the confinement along with the environment of a highly infectious pandemic around the induvial are put under great stress.Aims: The current study aims to assess the psychological impact and perceived stress due to COVID-19 lockdown in Young Adult population of India.Settings and Design: It is a cross sectional, observational study.Methods and Material: The survey was conducted using Google forms involving snowball sampling technique which obtained 267 responses in total. (IES-R) and (PSS) scales were used for the study.Statistical analysis used: Descriptive analysis were performed on the sociodemographic parameters and the comparison of means were done by Chi-square test in SPSS Statistic 21.0 (IBM SPSS Statistics, New York, United States). Results: The mean IES-R and PSS scores obtained for the population in this study was 25.64±18.95 and 18.27±6.10 respectively. Out of the 267 respondents in total 61.4% (n=164) of them were males. Maximum of the respondents 62.54%(n=167) belonged to the age group of 18-23 with mean age being 23.14± 2.913. 92.5% of the respondents were unmarried and only 26.6% belonged to the rural part of India. Females, younger individuals were found to have higher IES-R and PSS scores. Conclusions: There is significant psychological burden and stress on the young Indian population with females and younger individuals particularly students are the most vulnerable population.

Silty clay modified by fly ash and crumb rubber is a kind of sustainable subgrade filler which has good anti-freeze-thaw resistance stability but wake vibration isolation performance. The objective of this study was to improve the vibration isolation of the modified soil and investigate the vibration isolation effect of the composite subgrade structure of XPS plates and the modified soil by indoor impact test. First, the vibration isolation performance of silty clay, modified soil and composite subgrade structure was respectively evaluated. Second, the effect of XPS plate’s thickness and vibration intensity on the vibration performance of the composite subgrade structure were evaluated. Third, the vibration isolation performance of the test groups under the condition of freeze-thaw cycles was assessed. The results show that the vibration isolation performance of subgrade can be effectively improved by setting XPS plates. The composite subgrade structure has certain vibration isolation effect, especially in vertical direction. Considering vibration isolation performance and costs, 5cm is the optimum XPS plates thickness. The composite subgrade structure has great vibration isolation performance under the condition of freeze-thaw cycles, so it is suitable to be applied in road subgrade in seasonal frozen regions.

In this study, we first present a time-fractional L$\hat{e}$vy diffusion equation of the exponential option pricing models of European option pricing and the risk-neutral parameter. Then, we modify a particular L$\hat{e}$vy-time fractional diffusion equation of European-style options. Introduce a more general model from the models based on the L$\hat{e}$vy-time fractional diffusion equation and review some recent findings regarding of the Europe option pricing of risk-neutral free.

The construction industry is responsible for 40 to 45% of primary energy consumption in Europe alone. Therefore, it is essential to find new materials with a lower environmental impact in order to attain sustainable housing. This study aims to determine and compare the environmental impact of two clay samples forming a basis for the manufacture of traditional brick, a standard material in building construction; traditional red clay brick and a brick based on clay mixed with a biological ingredient. The samples of fired clay were manufactured at the laboratory scale, the results being valid exclusively as indicators for the extrapolation of the analysis to other studies. The results of the environmental impact of these formulations have been examined through an evaluation of life-cycle analysis (LCA), observing that the incorporation of biological pore forming agents led to a decrease of around 15 to 20% of all impact categories studied. Thus, the suitability of using biological-based additives in clay bricks was confirmed both for their constructive characteristics (lighter material) and increased energy efficiency (better thermal insulation) considering the environmental point of view.

As the natural resources are getting exhausted, the concept of sustainable development of region has received increasing attentions, especially for resource-dependent cities. In this paper an innovative method that emergy analysis and IPAT (Human Impact Population Affluence Technology) model were combined in order to analyze the quantitative relationship of economic growth and energy consumption and further to evaluate its overall sustainability level. Taiyuan, a traditional, resource-dependent city in China, is selected as the case study region. The main results show that total emergy of Taiyuan increased from 9.023× 1023 sej in 2007 to 9.116× 1023sej in 2014, with 38% reduction on non-renewable emergy and 125% growth on imported emergy. Regional emergy money ratio (RMB) was reduced by 48% from 5.31× 1013sej/$ in 2007 to 2.74× 1013sej/$ in 2014, indicating that the increasing speed of consuming resources and energy was faster than the increase of GDP, and that Taiyuan’s money purchasing power declined. The lower emergy sustainability index (ESI) indicates that Taiyuan was explored and produced large quantities of mineral resources, which puts more stress on the environment as a consequence, and that this is not sustainable in the long run. The IPAT analysis demonstrates that Taiyuan sticks to the efforts of energy conservation and environmental protection, in order to promote regional sustainable development, it is necessary to take an integrated effort. Policy insights suggest that resourceful regions should improve include energy and resource efficiency, optimizing energy and resourceful structure.

We extend Ziv and Lempel's model of finite-state encoders to the realm of lossy compression of individual sequences. In particular, the model of the encoder includes a finite-state reconstruction codebook followed by an information lossless finite-state encoder that compresses the reconstruction codeword with no additional distortion. We first derive two different lower bounds to the compression ratio that depend on the number of states of the lossless encoder. Both bounds are asymptotically achievable by conceptually simple coding schemes. We then show that when the number of states of the lossless encoder is large enough in terms of the reconstruction block-length, the performance can be improved, sometimes significantly so. In particular, the improved performance is achievable using a random-coding ensemble that is universal, not only in terms of the source sequence, but also in terms of the distortion measure.

Among all the active confinement techniques, the use of pre-tensioned stainless steel straps has recently gained much attention. The flexibility of the stainless steel straps allows us to bend and pass them through the thickness of the masonry, thus creating a three-dimensional strengthening system between the two opposite facings. The use of the same perforation for the passage of several straps closed in a loop generates a continuous strengthening system that prevents parts of the structure from falling and injuring the occupants during seismic events. However, the perforations can nullify the in-plane strengthening, as they act as cylindrical hinges and make the reinforcement system labile for certain strap arrangements. Diagonal compression tests on square masonry panels performed in the present study show that the straps improve neither strength nor ductility when running along the mortar head and bed joints, arranged in square meshes. Conversely, they improve both strength and ductility when the straps make angles of 45° with the mortar joints. Furthermore, the experimental results show that the straps exert an anisotropic effect that decreases the apparent in-plane Poisson ratio. They also provide new insights into the diagonal compression test and allow formulating a new proposal for the pseudo-ductility factor.

To improve the understanding of soil–pile interaction of laterally loaded piles, the quasi-static test of pile group foundation in silty clay with 5 foundation piles arranged in cross shape is carried out. The direct measurement-based p–y curves at different depths showed nonlinear behavior, in which the initial stiffness and ultimate soil reaction increased as the depth increased. The loading displacement amplitude corresponding to the failure of each foundation pile in the high axial compression reinforced concrete pile group foundation is given as follows: the front-end nappe foundation pile (#3 pile) is 6mm, the middle pile is 16mm, the front-end nappe foundation pile is 20mm, and the loading displacement amplitude of side pile is 24mm. In silty clay, due to the existence of pile group effect, the edge effect has little effect on the horizontal foundation bed coefficient of foundation pile in pile group, while the influence of masking effect on the horizontal foundation bed coefficient of each foundation pile in pile group is not related to the position of pile, but only to the existence of masking effect, and the influence of different columns of masking effect on the horizontal foundation bed coefficient is the same.

Nowadays, wearable devices for human health monitoring are increasingly become popular and widely used. Typically, the wearable device is small size and operates with batteries. Therefore, the wearable device acquires bio-signals and transfers to smartphones or personal computers (PC) via WiFi/ Bluetooth for processing data. To reduce power consumption is one of the most important challenges of designing wearable devices. To solve this problem, the proposed signal quality valuation (SQV) method can be select the high-quality signal and reduce the transfer time to other devices. In this paper, the proposed SQV and data compression method rely on real-time PPG signals analysis to retain important information of PPG signal, improve performance and power consumption of PPG devices. Besides, we also proposed Heuristic rules for heart rate (HR) estimation with compression data. The experimental results show that the highest compression ratio (CR) is 387.8 with BIDMC Physionet database (sampling frequencies of 125 Hz) and HR error as 1.43 bpm for averaging absolute error (avAE), the standard deviation absolute error (sdAE as 0.4) and relative error mean (avRE as 0.019). The proposed real-time PPG measurement system (sampling frequency as 100/ 200/ 400 Hz) reduce power consumption and open the new structure for healthcare application systems

In this article, we investigate limitations of importing methods based on algorithmic information theory from monoplex networks into multidimensional networks (such as multilayer networks) that have a large number of extra dimensions (i.e., aspects). In the worst-case scenario, it has been previously shown that node-aligned multidimensional networks with non-uniform multidimensional spaces can display exponentially larger algorithmic information (or lossless compressibility) distortions with respect to their isomorphic monoplex networks, so that these distortions grow at least linearly with the number of extra dimensions. In the present article, we demonstrate that node-unaligned multidimensional networks, either with uniform or non-uniform multidimensional spaces, can also display exponentially larger algorithmic information distortions with respect to their isomorphic monoplex networks. However, unlike the node-aligned non-uniform case studied in previous work, these distortions in the node-unaligned case grow at least exponentially with the number of extra dimensions. On the other hand, for node-aligned multidimensional networks with uniform multidimensional spaces, we demonstrate that any distortion can only grow up to a logarithmic order of the number of extra dimensions. Thus, these results establish that isomorphisms between finite multidimensional networks and finite monoplex networks do not preserve algorithmic information in general and highlight that the algorithmic information of the multidimensional space itself needs to be taken into account in multidimensional network complexity analysis.

Background: Risk tratification based on pre-test probability may improve the diagnostic accuracy of temporal artery high-resolution compression sonography (hrTCS) in the diagnostic workup of cranial giant cell arteriitis (cGCA). Methods: A logistic regression model with candidate items was derived from a cohort of patients with suspected cGCA (n = 87). The diagnostic accuracy of the model was tested in the derivation cohort and in an independent validation cohort (n = 114) by receiver operator characteristics (ROC)-analysis. The clinical items were composed to a clinical prediction rule, integrated into a stepwise diagnostic algorithm together with CRP-values and hrTCS-values. Results: The model consisted of 4 clinical variables (age &gt; 70, headache, jaw claudication, anterior ischemic optic neuropathy). The diagnostic accuracy of the model for discrimination of patients with and without a final clinical diagnosis of cGCA was excellent in both cohorts (AUC 0.96 and AUC 0.92, respectively). The diagnostic algorithm improved the positive predictive value of hrCTS substantially. Within the algorithm, 32.8% of patients (derivation cohort) and 49.1% (validation cohort) would not have been tested by hrtCS. None of these patients had a final diagnosis of cGCA. Conclusion: A diagnostic algorithm based on a clinical prediction rule improves the diagnostic accuracy of hrTCS.

Background: This research examines how market knowledge and artificial intelligence (AI) interact in different market designs such as business-to-business (B2B) settings while taking emerging technologies and the changing digitalization landscape into account. Objective: The main goal is to understand how AI affects market knowledge in different market designs such as business-to-business (B2B) contexts, taking into account language barriers, practical difficulties, and the revolutionary effects on decision-making and customer interactions. Result: They underscore the transformative potential of artificial intelligence (AI) by highlighting how it shapes market knowledge, encourages customized approaches, and improves marketing efficacy in the business-to-business (B2B) space. Conclusion: In order to create a path for responsible AI integration in B2B marketing, the study concludes with recommendations for standardized terminology related to AI, practical insights into implementation challenges, and ethical issues.

Background: COVID-19 pandemic has pulled us all a few steps back, were we never shake hands or hug each other when we meet our friends and family after a gap, but instead we greet them by saying Namaste and joining our hands together. As we all know, COVID-19 spreads through air and the only way to shield ourselves is by maintaining a safe distance from one another. Methodology: In order to conduct a meta-analysis on the number of COVID-19 cases in Kerala and India, the data was retrieved from various sites hosted by the government bodies. The data for analysis was collected from May 2020 to July 2020. The average number of days required to reach every 5000 fresh cases were also calculated using this data. COVID-19 has affected all the economy holistically regardless of financial, behavioral, or societal aspects. Conclusion: Lifting of the lockdown in a step by step process keeping in mind the necessities for the nation was a thoughtful act, but the people who mistook this opportunity and did not remain in quarantine after coming from abroad was recognized as the reasons behind the sudden and uncontrolled rise in the number of COVID-19 cases in Kerala, India. The government authorities had no other option but to lift the restrictions to reduce the economic burdens that had already affected the daily wage worker and farmers prompting them to give up their lives.

Extruded polystyrene (XPS) is frequently used in the construction of many different structures. It is therefore necessary to appropriately characterize its mechanical properties to ensure the safety of said structures. Among the available characterization tests, static bending tests are simple and easy to perform; owing to these characteristics, they should be performed more frequently than other tests. However, in static bending tests on XPS, there are several challenges owing to the high flexibility of XPS, and the chosen testing method and sample configuration affect the accuracy of characterization. In this study, three bending properties (Young’s modulus, proportional limit stress, and bending strength) of samples cut from an XPS panel were determined using three-point bending (TPB), four-point bending (FPB), and compression bending (CB) tests with varying sample span/depth ratios, and statistical analyses were performed to determine the relevance of the tests. The experimental results suggest that the TPB and CB tests were more feasible than the FPB test when the span/depth ratio was appropriately determined. However, clear differences were observed in the sample bending properties determined in these tests. In light of these findings, further studies should be conducted to elucidate these differences.

Patients with metastatic epidural spinal cord compression (MESCC) and favorable survival prognoses may benefit from radiation doses exceeding 10 x 3.0 Gy. In a multi-center phase 2 trial, patients receiving 15 x 2.633 Gy (41.6 Gy10) or 18 x 2.333 Gy (43.2 Gy10) were evaluated for local progression-free survival (LPFS), motor/sensory functions, ambulatory status, pain, distress, toxicity, and overall survival (OS). They were compared (propensity score adjusted Cox regression) to a historical control group (N=266) receiving 10 x 3.0 Gy (32.5 Gy10). In the phase 2-cohort, 50 (of 62 planned) patients were evaluable for LPFS. Twelve-month rates of LPFS and OS were 96.8% and 69.9%, respectively. Motor and sensory functions improved in 56% and 57.1% of patients, and 94.0% were ambulatory following radiotherapy. Pain and distress decreased in 84.4% and 78.0% of patients. Ten and two patients experienced grade 2 and 3 toxicities, respectively. Phase 2 patients showed significantly better LPFS than the control group (p = 0.039) and a trend for improved motor function (p = 0.057). Ambulatory and OS rates were not significantly different. Radiotherapy with 15 x 2.633 Gy or 18 x 2.333 Gy was well tolerated and appeared superior to 10 x 3.0 Gy.

Pure-compression shells have been the central topic in the form-finding of shells. This paper studies tension-compression mixed type shells by utilizing a NURBS-based isogeometric form-finding approach that analyzes Airy stress functions to expand the possible plan geometry. A complete set of smooth version graphic statics tools is provided to support the analyses. The method is validated using examples with known solutions, and a further example demonstrates the possible forms of shells that the proposed method permits. Additionally, a guideline to configure a proper set of boundary conditions is presented through the lens of asymptotic lines of the stress functions.

This research aims to study the ultimate limit state (ULS) behaviour of stiffened panel under longitudinal compression by non-linear finite element method (NLFEM). There are different types of stiffeners being used in shipbuilding i.e. T-bar, flat-bar and angle-bar. However, this research focuses on the ultimate compressive strength behaviour of flat-bar stiffened panel. A total of 420 of reliable scenarios of flat-bar stiffened panel are selected for numerical simulation by ANSYS NLFEM. The ultimate strength behaviours obtained were used as data for the development of closed form shape empirical formulation. Recently, Kim et al. [1] proposed for advanced empirical formulation for T-bar stiffened panel and the applicability of the proposed formulation to flat-bar stiffened panel will be confirmed by this study. The accuracy of the empirical formulation obtained for flat-bar stiffened panel has been validated by FE simulation results of statistical analysis (R2 = 0.9435). The outcome obtained will be useful for ship structural designers in predicting the ultimate strength performance of flat-bar type stiffened panel under longitudinal compression.

Background: Amidst escalating climate change concerns, sustainable practices in healthcare logistics are critical. This study evaluates the ecological impact and efficiency of medical sample transportation using drones, combustion cars, and electric cars across diverse terrains and weather in Liechtenstein and Switzerland. Methods: We conducted a comparative analysis of CO2 emissions, transport distances, and delivery times for each transportation modality. Data collection involved multiple runs under various conditions, with CO2 emissions measured using onboard systems, and transport efficiency assessed via GPS tracking and time monitoring. Results: Combustion cars exhibited the highest average CO2 emissions at 159.5 grams per kilometer (g/km). Electric cars emitted significantly less, averaging 3.43 g/km, which is 2.15% of combustion car emissions. Drones were the most environmentally friendly, with an average emission of 0.09 g/km, representing 0.07% of combustion car emissions and 2.6% of electric car emissions. Drones also showed substantial transport efficiency, covering 17% shorter distances on flat terrain and 24% shorter in mountainous areas, with time savings ranging from 13% to 80%. Conclusion: This study highlights the potential of drone technology to revolutionize healthcare logistics by reducing environmental impact and optimizing operational efficiency. Integrating drones can significantly lower the carbon footprint, improve sample integrity, and enhance patient care, promoting a greener, more resilient healthcare system.

Artificial intelligence (AI) has emerged as a transformative force in retail operations, promising significant advancements in efficiency, customer engagement, and competitive positioning. This research explores the integration of AI in retail, focusing on its potential benefits, challenges, and future trends. Through a comprehensive analysis, the study identifies key motivations for AI adoption, such as enhancing operational efficiency, optimizing inventory management, and personalizing customer interactions. Retailers are increasingly leveraging AI to streamline processes and gain insights into consumer behavior, which allows for more strategic decision-making and improved customer experiences. However, the implementation of AI is not without its obstacles. High costs, the need for specialized skills, and concerns about data privacy and ethical use of AI present substantial challenges. The impact of AI on employment, including job displacement and the necessity for reskilling, is also a critical consideration. Future trends suggest that AI will continue to drive innovation in retail, with developments in AI-powered analytics, autonomous retail solutions, and sustainability initiatives shaping the industry’s future. The study highlights the importance of addressing these challenges and ethical considerations to fully realize the potential of AI in retail. The findings emphasize the need for retailers to adopt a strategic approach to AI integration, balancing innovation with responsible practices to achieve long-term success. Overall, this research provides valuable insights into the evolving role of AI in retail and offers a foundation for understanding the complexities and opportunities associated with its adoption.

The safety concerns associated with current lithium-ion batteries are a significant drawback. A short-circuit within the battery's internal components, such as those caused by a car accident, can lead to ignition or even explosion. To address this issue, a polymer shear thickening electrolyte, free from flammable solvents, has been developed. It comprises a star-shaped oligomer derived from a trimethylolpropane (TMP) core and polyether chains, along with the inclusion of 20 wt.% nanosilica. Notably, the star-shaped oligomer serves a dual function as both the solvent for the lithium salt and the continuous phase of the shear thickening fluid. The obtained electrolytes exhibit an ionic conductivity of 10-6 S cm-1 at 20 °C and 10-4 S cm-1 at 80 °C, with a high Li+ transference number (t+ = 0.79). A nearly thirtyfold increase in viscosity to a value of 1187 Pa s at 25 °C and a critical shear rate of 2 s-1 were achieved. During impact, this electrolyte could enhance cell safety by preventing electrode short-circuiting.