C-reactive protein to lymphocyte ratio (CLR) has been shown to be associated with diseases characterized by chronic, low-grade inflammation. Since type 2 diabetes (T2DM) is also associated with inflammation, we aimed to study the association between CLR and T2DM. Patients with T2DM who presented to internal medicine outpatient clinics of our institution were divided into 2 groups according to their glycosylated hemoglobin (HbA1c) levels as well-controlled (HbA1c<7%) and poorly controlled (HbA1c≥7%) T2DM groups. Subjects assigned as healthy in routine check-up were included as control group. CLR values of the well and poorly controlled diabetics and control cases were compared. CLR of T2DM group (3.51 (0.03-21.78)) was significantly higher than that of the controls (0.65 (0.02-2.92)) (p<0.001). CLR was found to have a sensitivity of 63.2% and a specificity of 97.3% in predicting T2DM. The CLR value of patients with poor diabetic control was 4.76 (0.06-21.78), while the CLR value of patients with well controlled disease was 2.53 (0.03-12.07) (p<0.001). The sensitivity and specificity of the CLR in demonstrating poor diabetic control was 41.2% and the 86.1%, respectively. In conclusion, elevated CLR in T2DM patients and even more increased levels in poorly controlled diabetics suggest that CLR could be a useful additional diagnostic tool in treatment follow-up of the T2DM population.

Preliminary clinical data suggest pain reduction through fasting in different diagnoses. This uncontrolled observational clinical study examined the effects of prolonged modified fasting on pain and functional parameters in hip and knee osteoarthritis. Patients admitted to the inpatient department of Internal Medicine and Nature-based Therapies of the Immanuel Hospital Berlin between February 2018 and March 2020, answered questionnaires at the beginning and end of inpatient treatment, as well as 3, 6 and 12 months after discharge. Additionally, selected blood and anthropometric parameters were routinely assessed during the inpatient stay. Fasting was performed as part of a multimodal integrative treatment program, with daily caloric intake of <600 kcal for 7.7 ± 1.7 days. N=125 consecutive patients were included. Results revealed an amelioration of overall symptomatology (WOMAC Index score: -14.8±13.31; p<0.001; d=0.78), and pain alleviation (NRS Pain: -2.7±1.98, p<0.001, d=1.48). Pain medication was reduced, stopped, or replaced by herbal remedies in 36% of patients. Improvements were also observed in secondary outcome parameters, including increased quality of life (WHO-5: +4.5±4.94, p<0.001, d=0.94), reduced anxiety (HADS-A: -2.1±2.91, p<0001, d=0.55) and depression (HADS-D: -2.3±3.01, p<0.001, d=0.65), decreases in body weight (-3.6 kg ± 1.65, p< 0.001, d=0.21), and blood pressure (systolic: -6.2±15.93, p<0.001, d= 0.43; diastolic: -3.7±10.55, p<0.001, d=0.43). Results suggest that patients with osteoarthritis of the lower extremities may profit from a prolonged fast embedded in a multimodal integrative treatment regarding quality of life, pain, and disease-specific functional parameters. Confirmatory RCTs are warranted to further investigate these hypotheses.

Towards a better understanding of vegetation, permafrost, climate, landscape and lithology control on major and trace element (including macro and micro-nutrients and toxicants) transport in riverine systems, we studied two medium size (100-150 thousand km² watershed area) pristine rivers (Taz and Ket) of boreal and subarctic zone, western Siberia. Choosing the river basins of very low population density (< 1 people km-²) in the absence of any industrial or agricultural activity allowed testing the sole effect of natural factors and long-range atmospheric transfer on hydrochemistry of riverine solutes during the open water period. In the permafrost-bearing Taz River (main stem and 17 tributaries), sizable control of vegetation on element concentration was revealed. In particular, light coniferous and broadleaf mixed forest controlled DOC, and some nutrients (N, Mn, Fe, Mo, Cd, Ba); deciduous needleleaf forest positively correlated with macronutrients (P, Si, Mg, P, Ca) and Sr, and dark needle-leaf forest impacted Ntot, Al and Rb. Organic C stock in the upper 30-100 cm soil positively correlated with Be, Mn, Co, Mo, Cd, Sb, and Bi. The lithological control was generally poorly pronounced, due to abundant peat deposits overlaying the mineral strata. However, cretaceous carbonate mineral-bearing sedimentary deposits positively impacted the pH and concentration of Si, Mg, Ca and Cs. In the Ket River basin (large right tributary of the Ob River), we revealed the correlations between the phytomass stock at the watershed and alkaline-earth metals and U concentration in the river water. This control was weakly pronounced during high-water period (spring flood) and mostly evidenced during summer low water period.

Coffee is rich in phenolic acids, such as caffeic acid and chlorogenic acid (CGA). Polyphenol-rich diets have been shown to reduce the risk of metabolic syndrome (MeTS). Background and Objectives: This systematic review and meta-analysis discusses the effects of coffee consumption and its dose-response on MeTS parameters. Materials and Methods: PubMed and Scopus® were searched for relevant articles published between 2015 and 2020. This review focused on randomised controlled trials (RCTs) investigating the effect of coffee consumption on anthropometric measurements, glycaemic indices, lipid profiles, and blood pressure. Data from relevant studies were extracted and analysed using random, fixed, or pooled effects models with 95% confidence intervals (CIs). Results: Green coffee extract (GCE) supplementation (180 to 376 mg) was found to reduce waist circumference (weighted mean difference (WMD) = -0.39; 95% CI: -0.68, -0.10), triglyceride levels (WMD = -0.27; 95% CI: -0.43, -0.10), high-density lipoprotein-cholesterol levels (WMD = 0.62; 95% CI: 0.34, 0.90), systolic blood pressure (WMD = -0.44; 95% CI: -0.57, -0.32), and diastolic blood pressure (WMD = -0.83; 95% CI: -1.40, -0.26). Decaffeinated coffee (510.6 mg) reduced the fasting blood glucose levels (WMD = -0.81; 95% CI: -1.65, 0.03). The meta-analysis showed that the intake of GCE containing 180 to 376 mg of CGA (administered in a capsule) and liquid decaffeinated coffee containing 510.6 mg of CGA improved the MeTS outcomes in study participants. Conclusions: The findings of the review suggested that the effect of coffee on MeTS parameters varies depending on the types and doses of coffee administered. A more detailed RCT on specific coffee doses (with adjustment for energy and polyphenol intake) and physical activity is needed to further confirm the observed outcomes.

Various autoimmune diseases, including autoimmune hypothyroidism (AHT), are associated with a higher risk of developing mood disorders throughout life. Depression is accompanied by the changes in the levels of inflammatory and trophic factors, including interleukines (IL-1beta, IL-2, IL-6), interferon alpha (IFN-alpha), tumor necrosis factor alpha (TNF-alpha), C-reactive protein (CRP) and brain derived neurotrophic factor (BDNF). Similar disturbances in the cytokine profile are seen in AHT patients and their relatives. Disclosure of the relationship between the co-existence of depression and autoimmune subclinical thyroiditis indicates that the pathomecha-nism of depression may be related to the changes in the immune system, it is possible that both conditions may be caused by the same immune processes. The above hypothesis is indirectly sup-ported by the observations that the treatment with both antidepressants and levothyroxine leads to a decrease in the levels of proinflammatory cytokines with an increase in BDNF concentrations, simultaneously correlating with an improvement in the clinical parameters. However, so far there are no long-term studies determining the causal relationship between depression, thyroid auto-antibodies, and cytokine profile, which could bring us closer to understanding the interrelation-ships between them and facilitate the use of an adequate pharmacotherapy, not necessarily psy-chiatric. We consider the above issues insufficiently investigated but of great importance. This ar-ticle is an overview of the available literature as well as an introduction to our research project.

This study aims to develop and implement a methodology for retrieving bio-optical parameters in a lagoon located in the Biobío region, in south-central Chile by analyzing time series of Landsat-8 satellite images, specifically using the multispectral OLI sensor. The bio-optical parameters, i.e., chlorophyll-a (mg·m^-3) and turbidity (NTU) were also measured in-situ synchronized with the satellite passes to minimize the impact of atmospheric distortions. To calibrate the satellite images, various atmospheric correction methods (including ACOLITE, C2RCC, iCOR, and LaSRC) were evaluated during the image preprocessing phase. Spectral signatures obtained from the scenes for each atmospheric correction method were then compared with spectral signatures acquired in-situ on the water surface. In short, the ACOLITE model emerged as the best fit for the calibration process. Subsequently, we harnessed the reflectance data derived from the ACOLITE model to establish correlations between various spectral indices and the in-situ data. The empirical retrieval models (based on band combinations) that showed superior performance, as indicated by higher R² values, were subjected to rigorous statistical validation and optimization by applying a bootstrapping approach. Our analysis covered a spectrum of dates, seasons, and years, which allowed us to search deeper into the evolution of the trophic state associated with the lake. We identified a striking eight-year period (2014-2022) characterized by a decline in chlorophyll-a concentration in the lake possibly attributable to governmental measures in the region for the protection and conservation of the lake. The results of this initial study serve as the basis for the creation of a modern monitoring system that enhances traditional point-based methods, offering a holistic view of the ongoing processes within the lake.

This study aimed to evaluate the effects of a palygorskite-based antibacterial agent (PAA) as an alternative to antibiotics on growth performance, blood parameters, rumen fermentation, and rumen microbiota in sheep. A total of 120 sheep were randomly divided into five groups of six replicates with four sheep each. Sheep were fed a basal diet, an antibiotic diet supplemented with 500 g/t chlortetracycline (CTC), and a basal diet supplemented with 500, 1,000, and 2,000 g/t PAA for 80 d, respectively. Supplementation with 2,000 g/t PAA and 500 g/t CTC increased the average daily gain (ADG) of sheep compared with the control group (P < 0.05). Diets supplemented with 2,000 g/t PAA and 500 g/t CTC reduced (P < 0.05) the feed: gain (F/G ratio) in the overall periods. Dietary Supplementation with 1,000 g/t PAA significantly increased albumin and total protein (P < 0.05). A significant positive correlation was found between growth hormone concentration and PAA supplementation (P < 0.05). In addition, compared to the control group, the CTC group had higher growth hormone concentration and lower lipopolysaccharide concentration (P < 0.05). No dif-ference was observed between the five groups in terms of rumen fermentation characteristics (P > 0.05). At the phylum level, the relative abundance of Proteobacteria was lower in the PAA 2000 and CTC 500 groups than that in the control and PAA 500 groups (P < 0.05). At the genus level, a sig-nificant decrease (P < 0.05) in the relative abundance of RuminococcaceaeUCG-010 was observed in the PAA 1000, PAA 2000, and CTC 500 groups compared with that in the control group. In addition, the relative abundance of Prevotella1 (P < 0.05) was higher in the PAA 2000 group than that in the control group. These findings indicate that dietary supplementation with PAA has ameliorative effects on growth performance, blood parameters, and rumen microbiota, with an optimal dosage of 2,000 g/t for sheep.

A 52-day experiment was conducted to determine the crude protein (CP) requirements of juvenile matrinxã Brycon amazonicus, and to evaluate their resulting growth performance, hematological parameters and enzymatic activities. Sixty fish (29.03g ± 1.16g) were distributed in 12 tanks (310 L) with a completely randomized design, and maintained at four dietary crude protein levels (270, 320, 350, 390 g.kg-1) for 52 days. The results revealed that the fish fed diet 390 g.kg-1 CP had the best final weight, weight gain, feed conversion ratio, specific growth rate, protein efficiency ratio and lipid retention rate. The same could be stated for hematocrit, number of circulating erythrocytes, triglycerides and total proteins of the hematological profile (p&lt;0.05). In the whole body composition, dry matter content was lower in the fish fed 390 g.kg-1 CP, while lipid content was higher in the fish fed 350-390 g.kg-1 CP (p&lt;0.05). No differences were observed in CP and ash (p&gt;0.05), or in the activities of digestive enzymes (p&gt;0.05). In short, our findings suggest benefits of the 390 g.kg-1 CP feed for being the most adequate for this species’ juvenile stage.

Electric streamer discharges (streamers) in air are a very important stage of lightning, taking place before formation of the leader discharge, and with which an electric discharge starts from conducting objects which enhance the background elecric field, such as airplanes. Despite years of research, it is still not well understood what mechanism determines the values of streamer parameters, such as its radius and propagation velocity. The Streamer Parameter Model (SPM) is aimed to understand this mechanism, as well as to provide a way to efficiently calculate streamer parameters. Previously, we demonstrated that SPM results compared well with a limited set of experimental data. In this Brief Report, we compare SPM predictions to the published hydrodynamic simulation (HDS) results.

Background: The abrupt implementation of COVID-19 lockdown had impacted the management of diabetes mellitus. Limited access to health facilities and alterations in daily lifestyle put metabolic control among patients at risk. Thus, we observed the differences in metabolic control parameters in diabetic patients before and during the lockdown. Methods: We performed searches from five databases. Meta-analyses were done using random or fixed-effect approaches with glycemic control parameters (HbA1c, RBG, FBG, TIR, TAR, TBR) as primary outcomes. Mean difference (MD), Confidence Interval (CI), and p-value were calculated. Lipid profile presented as secondary outcome. Results: 21 studies with 3992 diabetic patients were included in the study. Meta-analysis presented an increase on HbA1c of T1D and T2D patients [MD=+0.06% (95%CI -0.10–0.23), I²=77%, p=0.45], TBR of T1D patients [MD=-0.05% (95%CI -0.38–0.28), I²=0%, p=0.77], FBG of T2D patients [MD=+3,47 mg/dL (95%CI 1.22–5.73), I²=0%, p=0.002], and lipid profile on qualitative analysis. However, TIR, TAR, and RBG of T1D patients were improved [MD=+3.52% (95%CI 0.29–6.74), I²=76%, p=0.03; MD=-3.36% (95%CI -6.48–-0.25), I²=75%, p=0.03; MD=-0.91 mg/dL (95%CI -4.52–6.34), I²=88%, p=0.74]. Conclusion: Lockdown enforcement did not worsen the glycemic control parameter in diabetic patients. Particular parameters inclined to improve during the lockdown.

We evaluated the usefulness of the novel cholesterol-triglyceride subgroup (CTS) indices that potentially reflect the metabolic status regarding risk of coronary heart disease (CHD) using a retrospective longitudinal study of the Japanese general population. We recruited 12,373 individuals from the annual users of our healthcare center. Among them, the first onset of CHD was recorded in 131 individuals between April, 2014 and March, 2020. The multivariate Cox proportional hazards regression analyses for all normalized lipid indices revealed that the CTSqnt index showed a comparable hazard ratio for the CHD outcome to non-high-density lipoprotein cholesterol (nonHDL-c) and triglycerides. The HR of the CTSqlt index was significantly lower than for CTSqnt, but still comparable to that for low-density lipoprotein cholesterol (LDL-c). In comparison with the other indices, CTSqlt is more sensitive to risk increment while the index value increases. Linear regression analyses for the CTS indices and previously known lipid indices suggest that the CTSqnt and CTSqlt indices reflect the quantity of atherogenic lipoproteins and size of smaller and denser LDLs, respectively. Furthermore, the CTSqnt/HDL-c index can be used as a comprehensive risk indicator that may represent the status of lipid metabolism determined by the CTSqlt and CTSqnt indices and thus may be useful for screening. The CTS indices can be used to evaluate the metabolic status of individuals, which may increase the risk of future CHD.

Background: The key objective of this research was to identify the dominant parameters and determine the patient status of pediatric patients with congenital heart disease in the ICU. The data we collected from the Congenital Heart Disease (CHD) Surgery Unit (ICU) in the National Heart Foundation Hospital and Research Institute, Dhaka, Bangladesh. Data from 300 ICU patients was collected and analyzed. We choose patients who are less than 12 years old at the time of ICU admission and whose ICU stay is longer than 24 hours. (2) Methods: According to the doctor’s advice, the dependent and independent variables are selected. The relationship between these parameters in the ICU was selected by linear modeling, which is associated with mortality risk. These parameters are used in the linear regression model and the ARIMA model for prediction. The prediction model is used for pediatric congenital heart disease patients in the ICU. (3) Results: The relation between CVP and BP (95% CI=0.2113,0.353 r=0.2841249), PEEP, and FiO2 (95% CI=0.6992,0.770 r=0.7367744) is statistically significant (p value&lt;0.001). pH and PO2 were statistically significant, but there were correlations (95% CI=0.161,0.308 r=0.2362575). The statistically significant (p &lt; 0.001) parameters were selected for prediction. In this study, BP, FiO2, and PO2 parameters were used in the linear regression model and the ARIMA model for prediction. We predict the next-hour patient’s status. The ARIMA model was found to have less error than the linear regression model. (4) Conclusions: This study helps identify the important parameters that are measured in the ICU to monitor patient status and predict the future value of those parameters, with the ultimate goal of providing physicians with an early signal of future patient conditions.

Translational rockslides caused by toe excavation are one of the commonly seen geohazards in mountainous regions due to line traffic construction. Quantifying their failure extension length (FEL) and travel distance are of significant interest as well as huge challenges in landslide hazard assessment. In this paper, a simple criterion is proposed for predicting these two factors based on the principles of rigid body limit equilibrium and kinetic energy theorem. Further, the proposed criterion is validated against the field observations and numerical results with a practical case of the Xinjianan landslide, a medium-sized translational rockslide that occurred in 2013 in Nanchuan District, Chongqing. The findings indicate that a tiny discrepancy can be found in FEL between the field observations and the proposed criteria, while this discrepancy could be considerable in travel distance between different methods. However, the relative discrepancies all fall within 20%, deemed acceptable.

The weight loss process variables of alkali-treated micropolyester woven fabric were optimized and reported in this study. The grey relational analysis (GRA) with the help of the Taguchi technique was efficiently used to optimize the key variables of this process. The caustic soda concentration, treatment temperature, and weight loss machine speed were considered the control or design parameters. The weight reduction percentage, air permeability, tensile strength, and thermal resistance of alkali-treated woven polyester fabrics were also considered as responses in this study. The experiments were implemented according to a 33 full factorial design. The levels of the control parameters which yield the maximum weight reduction, tensile strength, air permeability, and minimum thermal resistance of the treated polyester fabrics were found to be NaOH concentration and treatment temperature with the highest levels, and machine speed with the lowest level. This means that a 27% caustic soda concentration, treatment temperature of 125 OC, and machine speed of 40 m/min exhibited the optimum properties of the treated micropolytester fabrics. It is also proved that the treatment temperature is the most influential factor affecting the micropolyester fabric’s properties. The confirmation test which was carried out in this study confirmed that the GRA improved the alkali-treated polyester fabric properties.

Crop residue burning produces a lot of polluting gases and fine particles, endangering human health, damaging soil structure, and causing fire accidents. In addition to the impact of residue burning on the local environment, pollutants can spread with the wind to more distant areas and impact the air quality of surrounding areas, especially cities. Nevertheless, a comparative analysis of the impact of two common residue burning parameters, the number of residue fire points and residue burned area, on urban air quality indicators has not been reported. In this study, the correlation between these two different residue burning parameters on air quality in Daqing City was investigated comparatively using the Visible Infrared Imaging Radiometer Suite (VIIRS) fire point product, the Moderate-resolution Imaging Spectroradiometer (MODIS) burned area product, and buffer zone analysis. The association between MODIS burned area products and air quality index (AQI) was found to be around 0.8, with a maximum of 0.816 at a buffer zone radius of 50 km. Meanwhile, it was found that the correlation between the number of residue fire points extracted from the VIIRS active fire products and air quality was above 0.6, again with a maximum of 0.745 at a buffer radius of 50 km. Within other levels of buffer zones, the correlation between residue burned area and AQI was consistently higher than that between residue fire points and AQI. By comparing the correlation between VIIRS fire points, MODIS burned area, and AQI with the concentration of each pollutant, we found that the correlation between residue burned area and AQI and the concentration of each pollutant is higher. MODIS burned area monitoring, on the other hand, detects changes in the time series of images taken by satellite at two transit moments to obtain the new burned area and cumulative burned area during this period, allowing the monitoring of fire traces caused by fire points at non-transit moments. From analyzing the correlation between residue fire points, residue burned area, and the concentration of each pollutant (PM2.5, PM10, CO, NO2, SO2, O3), we found significant correlations between residue burning and PM2.5, PM10, CO, and NO2 concentrations, with the highest correlation (R2) of 0.81 for PM2.5. Moreover, the correlation between residue burned area and PM2.5, PM10, CO, and NO2 concentrations was significantly higher than that between the number of residue fire points and their concentrations.

Some of Iran's gas resources are known as sour gas because one of the major by-products of this gas is water. In fact, natural gas is combined with water vapor in underground reservoirs. In some areas, the amount of water vapor in natural gas is so high that it can be used as a source of drinking water. However, it should be noted that water vapor in natural gas may exacerbate corrosion in pipes and industrial equipment, and the combustion of more natural gas produces high temperatures that can lead to the production of nitrogen oxides (NOx), which They are the cause of air pollution. This is while the processed gas has a standard percentage composition in which the amount of water has the lowest position. The removal of moisture from natural gas is due to the need to prevent the reduction of the calorific value of the gas and also to purify the gas in order to achieve the necessary standards for delivering gas to petrochemicals, industries and domestic uses. The main goal of this research is to investigate the influencing parameters on zeolite TiO2 nanocomposite membranes in order to absorb moisture from gas. For this reason, with the construction of a TiZ-V membrane as a standard membrane, the result of the initial evaluation of a suitable membrane for gas dehumidification was made, and this membrane was placed as a standard for measuring the effect of the manufacturing parameters in a way that in each stage of membrane construction It was found that it was different from standard TiZ-V membrane only in terms of one parameter. This type of investigation made it possible to determine the effect of various effective parameters in membrane construction on efficiency. The findings showed that increasing the concentration of SiO2 has the greatest effect on increasing the water flux of the membrane. According to the other findings of this study, the effect of increasing the reaction time of the vapor phase carrier has been to reduce the process of paternity selectivity loss at higher pressures. Although due to the safety limitation of the equipment to measure the efficiency of the membrane at pressures higher than 7 bar, this measurement was not carried out, but charts were presented regarding the state of the water in the water, which were a measure of the superiority of the water in the water in comparison to the gas in the water, which is the higher water in the water It is an indicator of the appropriateness of the membrane's efficiency at its corresponding pressure, so that the examination of the difference between these two graphs shows the possibility of using the membrane at higher pressures

An increase in air temperature leads to a significant transformation of the relief and landscapes of the Arctic. The rate of permafrost degradation, posing a profound change in the Arctic landscape, depends on air temperature, vegetation cover, type of soils, surface and ground waters. The existing international circumpolar programs dedicated to monitoring the temperature state of permafrost TSP (Thermal State Permafrost) and active layer thickness CALM (Circumpolar Active Layer Monitoring) are not sufficient for a comprehensive characterization of geocryological conditions. Yet, no standardized protocol exists for permafrost monitoring and related processes. Here, we propose a novel multi-parameter monitoring protocol and implement for two sites in the European part of the Russian Arctic: the Yary site along the coast of the Baydaratskaya Bay in the Kara Sea (68.9°N) within the continuous permafrost area and the Hanovey site in the Komi Re-public (67.3°N) within the discontinuous permafrost one. The protocol includes drilling boreholes, determining the composition and properties (vegetation cover and soils), snow cover measure-ment, geophysical imaging, active layer estimation and continuous ground temperature meas-urements. Ground temperature measured in 2014 – 2020 revealed that amplitudes of surface tem-perature fluctuation had no significant difference between the Yary and Hanovey sites, while that the mean annual temperatures between the areas had a considerable difference of greater than 3.0 °C. The period of the presence of the active layer changed with the year (e.g., ranging between 135 and 174 days in the Yary site), showing longer when the air temperatures in summer and the preceding winter were higher. Electrical resistivity tomography (ERT) allowed determining the permafrost distribution and active layer thicknesses. Thermometry results were consistent with our geophysical data. Analyzing the composition and properties of frozen soils helped better interpret the data of geophysical and temperature measurements. Our work by integrating the study of the soil properties, ground temperatures, and ERT allowed fully characterize these sites, suggesting that it helps better understand the thermal state in any other research sites in the European north of Russia. Our suggested monitoring protocol enables calibrating and verifying the numerical and analytical models of the heat transfer through the earth’s surface.

We utilized laser irradiation as a potential technique in tuning the electrical performance of NiOx/SiO2 thin film transistors (TFTs). By optimizing the laser fluence and the number of laser pulses, the TFT performance is evaluated in terms of mobility, threshold voltage, on/off current ratio and subthreshold swing, all of which were derived from the transfer and output characteristics. The 500 laser pulses irradiated NiOx/SiO2 TFT exhibited an enhanced mobility of 3 cm2/V-s from a value of 1.25 cm2/V-s for as-deposited NiOx/SiO2 TFT. The laser-irradiated NiOx material likely has a significant concentration of defect gap states, which could also be involved in light absorption processes. Second, and more importantly, the excess energy that the photogenerated charge carriers possess (due to the significant difference between the photon energy and the bandgap of NiOx), combined with the very high light intensity, would result in complex thermal and photo thermal changes thus resulting in an enhanced electrical performance of p-type NiOx/SiO2 TFT structure.

We propose a model for gravity based on the gravitational polarization of space. With this model, we can relate the density parameters within the Friedmann model, and show that dark matter is bound mass formed from massive dipoles set up within the vacuum surrounding ordinary matter. Aggregate matter induces a gravitational field within the surrounding space, which reinforces the original field. Dark energy, on the other hand, is the energy density associated with gravitational fields both for ordinary matter, and bound, or induced dipole matter. At high CBR temperatures, the cosmic susceptibility, induced by ordinary matter vanishes, as it is a smeared or average value for the cosmos as a whole. Even though gravitational dipoles do exist, no large scale alignment or ordering is possible. Our model assumes that space, i.e., the vacuum, is filled with a vast assembly (sea) of positive and negative mass particles having Planck mass, called planckions, which is based on extensive work by Winterberg. These original particles form a very stiff two component superfluid, where positive and negative mass species neutralize one another already at the submicroscopic level, leading to zero net mass, zero net gravitational pressure, and zero net entropy, for the undisturbed medium. It is theorized that the gravitational dipoles form from such material positive and negative particles, and moreover, this causes an intrinsic polarization of the vacuum for the universe as a whole. We calculate that in the present epoch, the smeared or average susceptibility of the cosmos equals, , and the overall resulting polarization equals, . Moreover, due to all the ordinary mass in the universe, made up of quarks and leptons, we calculate a net gravitational field having magnitude, . This smeared or average value permeates all of space, and can be deduced by any observer, irrespective of location within the universe. This net gravitational field is forced upon us by Gauss’s law, and although technically a surface gravitational field, it is argued that this surface, smeared value holds point for point in the observable universe. A complete theory of gravitational polarization is presented. In contrast to electrostatics, gravistatics leads to anti-screening of the original source field, increasing the original value, , to, , where is the induced or polarized field. In the present epoch, this leads to a bound mass, , where is the sum of all ordinary source matter in the universe, and equals the relative permittivity. A new radius, and new mass, for the observable universe is dictated by the density parameters in Friedmann's equation, and Gauss’s law. These lead to the very precise values, , and, , respectively, somewhat larger than current less accurate estimates.

Accurate monthly runoff estimation is fundamental in water resources management, planning, and development, resulting in preventing and reducing water-related problems, such as flooding and drought. This article evaluates the performance of the monthly hydrological rainfall-runoff model, GR2M model, in Thailand's southern basins. The GR2M model requires only two parameters, and no prior research has been reported on its application in this region. The 37 runoff stations, which are distributively located in three sub-watersheds of Thailand's southern region, namely; Thale Sap Songkhla, Peninsular-East Coast, and Peninsular-West Coast, were selected as study cases. The available monthly hydrological data of runoff, rainfall, air temperature from the Royal Irrigation Department (RID) and the Thai Meteorological Department (TMD) were collected and analyzed. Thornthwaite method was utilized for the determination of evapotranspiration. The model's performance was conducted using three statistical indices: Nash-Sutcliffe Efficiency (NSE), Correlation Coefficient (r), and Overall Index (OPI). The model's calibration results for 37 runoff stations gave the average of NSE, r, and OPI of 0.637, 0.825, and 0.757, and those values for verification of 0.465, 0.750, and 0.639, respectively. It indicated a model's acceptable performance and could apply the GR2M model for determining monthly runoff variation in this region. The spatial distribution of X1 and X2 values was conducted by using IDW method. It was susceptible to the X1 value and X2 value of approximately more than 0.90 gave the higher model's performance.

The present study propose an innovative turn-boring operation method and focuses on finding optimal turn-boring process parameters for AA7050-T7451 by considering multiple performance characteristics using Taguchi orthogonal array with the grey relational analysis, the effect of cutting variables such as, feed rate, depth of cut and cutting speed are optimized with considerations of multiple performance characteristics namely surface roughness, roundness error, material removal rate and power consumption the optimal values were found out from the Grey relational grade. The result of the Analysis of Variances (ANOVA) is proved that the most significant factor is cutting speed, followed by feed rate, radial depth of cut. Finally, confirmation tests were performed to make a comparison between the experimental results. Experimental results have shown that machining performance in precision turn-boring process can be improved effectively through this approach

Overweight/obesity and cardiovascular diseases are associated with high rates of mobility and mortality. We investigated inflammatory lesions and ionic transporters in the left ventricle of male rats chronically fed a high-fat diet (HL). They developed moderate overweight with early expansion of visceral adiposity. The inflammatory markers interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-), Na+-transporting ATPases, sarco-endoplasmic reticulum Ca2+-ATPase (SERCA2a), and the abundance of Angiotensin II receptors were studied together with lipid and glycemic profiles, and the left ventricle echocardiographic parameters fractional shortening (FS) and ejection fraction (EF). HL rats doubled IL-6 and TNF-, which returned to normal levels when signaling coupled to Angiotensin II type 2 receptors (AT2R) was supraregulated by Ang-(3–4) administration. The decreased glucose tolerance was accompanied by significantly reduced plasma triglycerides due to intense hepatic steatosis (Crisóstomo et al. Metabolism Open. 2022, 14, 100176). AT2R (and AT1R) abundance did not change. (Na++K+)ATPase and ouabain-resistant Na+-ATPase were downregulated and upregulated, respectively, normalized with Ang-(3–4). SERCA2a lost its most critical regulatory property, inhibition by excess substrate. The ultrasound showed no changes in FS and EF. We conclude that very moderate overweight can cause silent initial molecular tissue damage in heart, which can evolve to cause systolic dysfunction.

This study presents a numerical analysis of rock deformation and damage behaviors induced by dynamic loadings, specifically focusing on the fracturing of tight oil reservoirs. An elastoplastic model based on finite element methods was utilized to simulate the effects of varying loading and perforation parameters. Three distinct scenarios were modeled: a single perforation, boundary loading on three sides, and multiple perforations, each providing unique insights into the mechanical responses of the rock material. The analysis revealed that dynamic effects are highly localized around perforations and loaded boundaries across all scenarios. Acceleration magnitudes are captured with rapid attenuation observed as the distance from the perforation increased. This indicated that the highest stress concentrations and deformation occurred close to the points of loading or perforation. Strain rate analysis in the x direction showed significant fluctuations near the perforations, reflecting intense stress redistributions and compressive deformation, especially prominent in the scenario with multiple perforations. Plastic strain, representing irreversible damage, was found to concentrate near perforation tips and loaded boundaries. However, the pattern of plastic strain accumulation varied: in the small domain scenario with boundary loading, plastic strain did not immediately accumulate next to the loading boundary, whereas in scenarios with single and multiple perforations, damage developed from the loading boundaries. These findings highlight the need for precise control in perforation and dynamic loading processes to manage stress and deformation effectively. It is concluded that optimizing perforation patterns and loading strategies can enhance reservoir stimulation efficiency while minimizing unintended damage to the surrounding formation.

Plasma-activated water (PAW) is an emerging and promising green technology in the agriculture sector during recent years. The aim of this study was to examine the influence of the spraying of PAW and amino acid fertilizer concentrations on the physiological, biochemical and phytochemical characteristics of German chamomile varieties under field conditions. Method: The experiment was performed during 2020–2021 as a factorial using a randomized complete block design with three replications, in an arid and warm region. The factors contained five fertilizer levels (0 (control), 1, 2, 3 ml·L−1 amino acid and PAW) and three German chamomile cultivars Bona, Bodegold, Lianka). Physiological, biochemical and phytochemical traits such as plant height, fresh and dried flower weight, chlorophyll a, b, carotenoids, CHN elements, C:N ratio, total protein, amino acid profile, essential oil yield, apigenin content and major secondary metabolites were examined. Results: The ANOVA indicated that the impact of the cultivar and fertilizer was significant on all physiological, biochemical and phytochemical studied parameters. The amino acid fertilizer and PAW enhanced physiological features, hydrogen, C:N ratio, essential oil yield, apigenin content and main phytochemical compositions like chamazulene and α-bisabolol, but it had no incremental effect on the carbon, nitrogen, and total protein percentage. Conclusion: Findings revealed that the application of foliar amino acid fertilizer and PAW treatments improves physiological, biochemical and phytochemical parameters in German chamomile cultivars under field conditions.

Accidental arterial embolization of hyaluronic acid (HA) fillers can lead to severe complications, including skin ischemia, blindness, and stroke. Currently, the intra-arterial dispersal and fragmentation behavior of HA gels is unknown but is critical to our understanding of the pathomechanism of these injuries. This work introduces the Pulsatile Unit for the Laboratory Simulation of Arterioembolic Restrictions (PULSAR) and evaluates the intravascular behavior of different HA gels. The fragmentation and dispersal behaviors of four HA gels with distinct rheological properties were evaluated via high-resolution videography and ImageJ particle size and morphology analysis. The gels' elastic modulus (G'), loss modulus (G''), tan(δ), and HA concentration were subsequently correlated with their intra-arterial behaviors. This study effectively confirms the extensive fragmentation of HA gels upon arterial inoculation, with particle sizes ranging from &lt;50 µm to &gt;1 mm. Gel particle size and morphology correlate most significantly with tan(δ). Conversely, arterial flow rates do not significantly influence gel fragmentation behavior, though the probability of proximal, macrovascular obstruction is affected. Overall, this study validates the PULSAR model for simulation of arterial dynamics and the testing of intravascular filler kinematics. The findings highlight the importance of gel viscoelasticity and flow parameters in determining particle size, dispersibility, and occlusive potential.

It is unavoidable that the characteristics of the robot system alter inexactly or cannot be correctly determined during movement and are impacted by external disturbances. There are many adaptive control methods, such as sliding control or neural control, to improve the quality of trajectory tracking for robot motion systems. Still, those methods require a large amount of computation related to solving the problem of constrained nonlinear optimization problem. The article presents some techniques for determining an intelligent controller's online learning function parameters, including two circuits: the inner circuit is a state feedback linearized controller, and the outer course is an Interactive learning controller and does not use the robot's mathematical mode with function parameters online optimal learning and intelligent online learning closely following the joint model to stabilize the robot system. Finally, the 2-DOF planar robot simulation is performed on Matlab software R2022b. The findings indicate that outstanding tracking performance is achievable.

The ultimate analysis parameters including carbon (C), hydrogen (H), nitrogen (N), and oxygen (O) content in biomass was rarely found to be predicted by nondestructive tests until to date. In this research, we developed partial least squares regression (PLSR) models to predict the ultimate analysis parameters of chip biomass using near infrared (NIR) raw spectra of non-wood and wood samples from fast growing tree and agricultural residue and nine different traditional spectral preprocessing techniques. These techniques include first derivative (sd1), second derivative (sd2), constant offset, standard normal variate (SNV), multiplicative scatter correction (MSC), vector normalization, min-max normalization, mean centering, sd1 + vector normalization, and sd1 + MSC. Additionally, we employed a genetic algorithm (GA), successive projection algorithm (SPA), multi-preprocessing (MP) 5−range, and MP 3−range to develop a PLSR model for rapid prediction. A dataset consisting of 120 chip biomass samples was utilized for model development in which the samples was non-wood samples of 65-67% and wood samples was 33-35%, and the model performance were evaluated and compared. The selection of the optimum performing model was mainly based on criteria such as the coefficient of determination in the prediction set (R2P), root mean square error of the prediction set (RMSEP), and the ratio of prediction to deviation values (RPD). The optimal model for weight percentage (wt.%) of C was obtained using GA−PLSR, yielding R2P, RMSEP, and RPD values of 0.6954, 1.1252 wt.%, and 1.8, respectively. Similarly, for wt.% of O, the most effective model was obtained using the multi-preprocessing PLSR−5 range method with R2P of 0.7150, RMSEP of 1.3088 wt.%, and RPD of 1.9. For wt.% of N, the optimal model was obtained using the MP PLSR−3 range method, resulting in R2P, RMSEP, and RPD values of 0.6073, 0.1008 wt.%, and 1.6, respectively. However, wt.% of H model provided R2P, RMSEP, and RPD values of 0.5162, 0.2322 wt.%, and 1.5, respectively. Notably, the limit of quantification (LOQ) values for C, H, and O were lower than the minimum reference values used during model development, indicating a high level of sensitivity. However, the LOQ for N, exceeded the minimum reference value, implying the samples to be predicted by the model must be in the range of reference range in calibration set. By scatter plot analysis, the effect of combined non-wood and wood spectra of biomass chips on rapid prediction of ultimate analysis parameters using NIR spectroscopy was investigated. To include different species in a model, the species have to be not only in the different values of the constituents to make a wider range for robust model but also they must provide their trend line characteristics in the scatter plot i.e. correlation coefficient (R), slope and intercept (same slope and slope approached to 1 and intercept is same (no gap) and approached zero, high R approached to 1). The effect of the R, slope and intercept to obtain the better optimized model were studied. The results show that the different species affected model performance of each parameter prediction in a different manner and by scatter plot analysis which of these species were affecting the model negatively and how the model could be improved was indicated. This is the first time of the effect is studied by the principle of scatter plot.

The issue of optimising the initial stand density (ISD) of tree plantations has high practical importance. The objective of this study was to nondestructively evaluate the influence of the initial stand density of Scots pine plantations located in the European part of the Russian Federation on wood basic density (BD), moisture content (MC), ultrasound velocity (UV), latewood content, and drilling resistance (DR). 45-year-old trees with stand densities of 500, 1000, 3000, 5000, and 10000 trees/ha were tested by a 5-cm-long core sample for gravimetric MCGM and BD, by PULSAR-2.2 for UV along the height (UVH) and through the tree trunk diameter (UVD), by the IML-RESI PD-400 tool for DR, and by GANN HT 85T for MC based on the electrical resistance method (MCERM). A significant influence of ISD was found on DBH, UVD, MCGM, and MCERM. ISD had no significant impact on BD, UVH, and DR. The wood BD ranged from 356 to 578 kg/m-3, with a mean value of 434±3.3 kg/m-3, and was restricted by the soil and environmental factors. DBH and 70% MCERM were good indicators of tree vitality. Linear correlations between DBH and MCERM (R2=0.67), DBH and MCGM (R2=0.74), DR and BD (R2=0.71), and the two-factor model MCGM=f(DBH, BD), (R2=0.76) were found.

Limited scientific evidence shows that alpha lipoic acid (ALA) can induce regression rates of low-grade squamous intraepithelial lesions (LSIL) but the mechanisms of these effects have not been elucidated. To gain a broader insight into its therapeutic potential and mechanisms of action, the effects of 3-month supplementation with 600 mg of ALA on antioxidant- and lipid status param-eters in 100 patients with LSIL were investigated in randomized placebo-controlled study. Obtained results were discussed in terms of patients’ initial metabolic status and diet quality (particularly nutritional intake of antioxidants). Obtained results showed that oxidative status biomarkers were not significantly affected by ALA supplementation. However, serum superoxide dismutase (SOD) activity was positively affected in the subgroup of patients with higher dietary antioxidant intake. Surprisingly, ALA supplementation resulted with small but statistically significant increase of serum low density lipoprotein (LDL) and observed effect was significantly affected by the initial lipid status of participants. Larger studies are necessary to gain additional insights on the clinical significance of ALA as an antioxidant and hypolipemic agent and to optimize its potential application in LSIL treatment.

The depletion and environmental problems associated with fossil fuels have encouraged us to look for alternative feedstock that do not compromise food security and the environment. Sorghum is a fast-growing crop that can be harvested twice a year and produces both food and straw that can be utilized in the production of bio-based fuels. In this study, the production of bioethanol and the effects of fermentation parameters on ethanol yield are presented. A sequential pretreatment method was employed, using dilute sulfuric acid (1%) at 125 °C in the first stage and dilute sodium hydroxide (1.25 %) at 90 °C in the second stage. The residues left after the sequential pretreatment stage were hydrolyzed using acid hydrolysis. The sugar concentration of the hydrolysates was determined using the phenol sulfuric acid method, and three hydrolysates having sugar levels of 30.42 g/L, 31.79 g/L, and 32.9875 g/L were selected for fermentation. The ethanol yield was determined after 72 hours of fermentation at 30 °C with varying inoculum sizes (5%, 10%, and 15%) and pH (4.5, 5, and 5.5). With a maximum ethanol yield of 0.617 mL/g (48.742%) produced at a sugar content of 32.9875 g/L, pH of 5, and inoculum size of 15%, statistical analysis showed that all three independent parameters affected ethanol yield. According to these findings, while raising sugar content, inoculum amount, and pH all initially result in higher ethanol yields, doing so further reduces yield. So, in order to increase ethanol yield, fermentation conditions must be carefully managed while producing ethanol from sequential acidic-alkaline pretreated sorghum straw. The strategy followed by using sequential acidic-alkaline pretreatment of sorghum straw provides prospects for efficient and effective production of biofuels from alternative feedstock.

Abstract: During firing from a mortar, an important issue is the parameters of compressibility of the ground on which the mortar is placed. This affects the operation of the mortar (including safety). During the qualification tests of the mortar, the influence of different types of substrate on its strength and work during shooting should be examined. Until now in the Polish standardization documents was no clear description about the substrate parameters used for this kind of tests. Analysis of the literature also did not allow to determine the dependence of the mortars displacement in the function of the type of substrate and its geotechnical parameters. Therefore, the authors carried out analytical and experimental analysis of the use of geotechnical methods to determine the parameters of the substrate for mortar testing. The paper presents the proposed types of standardized soil and their research methods. Preliminary tests were also carried out using the prescribed measurement methods and a comparative mortar firing test. Subsequently, an analysis of the results was carried out and the possibilities of using the proposed methods of measuring the parameters of soil compressibility were determined.

Strawberry is a saline sensitive plant adversely affected under slightly or moderately saline conditions. Growth and biochemical parameters of strawberry plants grown under NaCl (0-, 30-, 60-, and 90 mmol L-1) conditions with or without a halophytic companion plant (Portulaca oleracea L.) were investigated in a pot experiment. Salt stress negatively affected the growth, physiological (stomatal conductance, electrolyte leakage, total soluble solids) and biochemical parameters such as chlorophyll contents (chl-a and chl-b), proline, hydrogen peroxide, malondialdehyde, catalase, and peroxidase enzyme activities, lycopene, vitamin C contents along with the mineral uptake of strawberry plants. The companionship of P. oleacea increased fresh weight, dry weight, and fruit average weight and total fruit yield of strawberry plants along with the improvement of physiological and biochemical parameters. This study showed that cultivating of P. oleracea with strawberry plants under salt stress conditions effectively increased strawberry fruit yield and quality. We, therefore, that approaches towards the use of P. oleracea could be an environmentally friendly method that should be commonly practised where salinity is of great concern.

The study aims to elaborate a neural model and algorithm for optimising hardness and porosity of coatings and thus ensure that they have superior cavitation erosion resistance. Al2O3-13wt.%TiO2 ceramic coatings were deposited onto 316L stainless steel by atmospheric plasma spray (ASP). The coatings were prepared with different values of two spray process parameters: the stand-off distance and torch velocity. Microstructure, porosity and microhardness of the coatings were examined. Cavitation erosion tests were conducted in compliance with the ASTM G32 standard. Artificial neural networks (ANN) were employed to elaborate the model, and the multi-objectives genetic algorithm (MOGA) was used to optimise both properties and cavitation erosion resistance of the coatings. Results were analysed with Matlab software by Neural Network Toolbox and Global Optimization Toolbox. The fusion of artificial intelligence methods (ANN+MOGA) is essential for future selection of thermal spray process parameters, especially for the design of ceramic coatings with specified functional properties. Selection of these parameters is a multicriteria decision problem. The proposed method made it possible to find a Pareto front, i.e. trade-offs between several conflicting objectives – maximising the hardness and cavitation erosion resistance of Al2O3-13%TiO2 coatings and, at the same time, minimizing their porosity.

Additive manufacturing (AM) of high strength Al alloys promises to enhance the performance of critical components related to various aerospace and automotive applications. The key advantage of AM is its ability to generate lightweight, robust, and complex shapes. However, the characteristics of the as-built parts may represent an obstacle to satisfy the part quality requirements. The current study investigates the influence of selective laser melting (SLM) process parameters on the quality of parts fabricated from different Al alloys. A design of experiment (DOE) is used to analyze relative density, porosity, surface roughness, and dimensional accuracy according to the interaction effect between the SLM process parameters. The results show a range of energy densities and SLM process parameters for the AlSi10Mg and Al6061 alloys needed to achieve “optimum” values for each performance characteristic. A process map is developed for each material by combining the optimized range of SLM process parameters for each characteristic to ensure good quality of the as-built parts. The second part of this study investigates the effect of SLM process parameters on the microstructure and mechanical properties of the same Al alloys. This comprehensive study is also aimed at reducing the amount of post-processing needed.

The classical Rotational Isomeric State (RIS) model, originally proposed by Flory, has been used to rationalize a wide range of physicochemical properties of neutral polymers. However, many weak polyelectrolytes of interest are able to regulate their charge depending on the conformational state of the bonds. Recently, it has been shown that the RIS model can be coupled with the Site Binding (SB) model, for which the ionizable sites can adopt two states: protonated or deprotonated. The resulting combined scheme, the SBRIS model, allows to analyse ionization and conformational equilibria on the same foot. In the present work this approach is extended to include pH-dependent electrostatic Long Range (LR) interactions, ubiquitous in weak polyelectrolytes at moderate and low ionic strengths. With this aim the original LR interactions are taken into account by defining effective Short Range (SR) and pH-dependent parameters, such as effective microscopic protonation constants and rotational bond energies. The new parameters are systematically calculated using variational methods. The machinery of statistical mechanics for SR interactions, including the powerful and fast transfer matrix methods, can then be applied. The resulting technique, to which we will refer as Local Effective Interaction Parameters (LEIP) method, is illustrated with a minimal model of a flexible linear polyelectrolyte containing only one type of rotating bonds. LEIP reproduces very well the pH dependence of the degree of protonation and bond probabilities obtained by semi-grand canonical Monte Carlo simulations, where LR interactions are taken explicitly into account. The reduction in the computational time in several orders of magnitude suggests that the LEIP technique could be useful in a range of areas involving linear weak polyelectrolytes, allowing direct fitting of the relevant physical parameters to the experimental quantities.

Background and Objective: To examine the effect of ordered subset expectation maximization (OSEM) parameters on the quantitative image quality of cardiac SPECT images in two different frequently used SPECT cameras and determine the optimal settings for producing images of best diagnostic quality. Another objective was to assess if different cameras produced a significant change in optimal parameters and levels of detectability. Methods: The optimization of OSEM iterative reconstruction algorithm was carried out by comparing image quality metrics, namely, contrast-to-noise ratio (CNR) and defect contrast across 12 OSEM subset-iteration combinations to find the best choice for cardiac perfusion SPECT images. Eight frames were reconstructed using the SIMIND Monte Carlo Simulation package. An activity of 370 MBq (10mCi) and projection acquisition interval of 20 seconds per projection were used. Attenuation (AC) and scatter corrections (SC) were performed in this study for all images. Results: The 16-2 subset-iteration combination yielded the highest CNR and defect contrast values for both cameras. The difference between CNR values for two cameras was found to be around 5% only. Conclusions: Monte Carlo simulations can be useful to investigate how quantitative image quality behaves with respect to reconstruction parameters and correction algorithms in a controlled environment. The found optimum is similar to values reported in previous findings. In this study, the use of different camera brands did not affect the optimum. The quantitative detectability measures were also very similar.

This paper presents three types of tensor Conjugate-Gradient methods for solving large-scale linear discrete ill-posed problems based on the t-product between third-order tensors. An automatical determination strategy of a suitable regularization parameter is proposed for the tensor conjugate gradient (tCG) method. A truncated version and a preprocessed verion of the tCG method are further presented. The discrepancy principle is employed to determine a suitable regularization parameter. Several numerical examples are given to show the effectiveness of the proposed tCG methods in image and video restoration.

Type 2 diabetes mellitus (T2DM) is a chronic metabolic disorder characterized by elevated blood glucose levels. Despite the availability of pharmacological treatments, dietary plans, and exercise regimens, T2DM remains a significant global cause of mortality. Consequently, there is a growing interest in exploring lifestyle interventions, such as Intermittent Fasting (IF). This study aims to identify underlying patterns and principles for effectively improving T2DM risk parameters through IF. By analyzing data from multiple randomized clinical trials investigating various IF interventions in humans, a machine learning algorithm was employed to develop a personalized recommendation system. This system advises pre-diabetic and diabetic individuals on the most suitable IF interventions to improve T2DM risk parameters. With a success rate of 95%, this recommendation system offers highly tailored guidance, optimizing intermittent fasting's benefits for diverse population subgroups. The results of this study allow us to conclude that weight is the crucial feature for females, while age is the determining factor for males to reduce glucose levels in blood. By revealing patterns in diabetes risk parameters among individuals, this study not only provides practical guidance but also sheds light on the underlying mechanisms of T2DM, contributing to a deeper understanding of this complex metabolic disorder.

Lagoons are becoming sporadically utilised albeit they are equipped with high potential for the outsourcing of environmental and industrial benefits. It leads to the endangered pollution of lagoon water aquatic system. The prime reason is the lack of knowledge among stakeholders and researchers regarding the influential parameters in establishing the lagoon water quality. The optimal quality for lagoon water is critical for the longevity of aquatic ecosystem. This study focuses on using bibliographic references to find the most influential factors determining the water quality in lagoons for deriving a comprehensive long-term water quality monitoring plan to ensure the sustainability of the lagoon water ecosystem. The lagoon water quality was classified in this study into biological, physical, and chemical parameters and studied for their importance upon enhancing the water quality. Experiments were conducted on selected parameters using the water samples from the selected Sri Lankan lagoons with available facilities to observe the water quality. The overall findings on physiochemical and biological characteristics using the experiments temperature, turbidity, pH, salinity, DO, BOD, COD, phosphates, nitrates, ammonia content and faecal coliforms in water specimens suggest that the selected Sri Lankan lagoons are heavily polluted due to their distinctive variations from the allowable threshold limits specified in the literature sources. To increase such increased risks associated with lagoon water systems, a long-term monitoring strategy is recommended to be incorporated at lagoon waters in order to assure their sustainability.

Copper ferrite attracts a lot of interest from researchers as a material with unique magnetic, optical, catalytic and structural properties. In particular, the magnetic properties of this material are structurally sensitive and can be tuned by changing the distribution of Cu and Fe cations in octahedral and tetrahedral positions by controlling synthesis parameters. In this study, we propose a new simple and convenient method for the synthesis of copper ferrite nanoparticles using a strongly basic anion exchange resin in OH form. The effect and possible mechanism of polysaccharides addition on the elemental composition, yield and particle size of CuFe2O4 is investigated and discussed. It is shown that anion exchange resin precipitation leads to a mixture of unstable at standard temperature cubic (c-CuFe2O4) and stable tetragonal (t-CuFe2O4) phases. The effect of the reaction conditions on the c-CuFe2O4 stability is studied by temperature-dependent XRD measurements and discussed in terms of the cations distribution, Jahn−Teller distortion and Cu2+ and oxygen vacancies in the copper ferrite lattice. The obtained differences in the values of saturation magnetization and the coercive force of prepared samples are explained with a reference to variations in the particle sizes and the structural characteristics of copper ferrite.

Lignocellulosic fibers are widely applied as composite reinforcement due to their properties. The thermal degradation behavior determines the maximum temperature in which the fiber can be applied without significant mass loss. It is possible to determine these temperatures using Thermogravimetric Analysis (TG). In particular, when curves are obtained at different heating rates, kinetic parameters can be determined and more detailed characteristics of the material are obtained. However, every curve obtained at a distinct heating rate demands material, cost, and time. Methods to predict thermogravimetric curves can be very useful in the materials science field and in this sense mathematical approaches are powerful tools if well employed. For this reason, in the present study, curaua TG curves were obtained at three different heating rates (5, 10, 20, and 40 °C.min-1) and Vyazovkin kinetic parameters were obtained. After, the experimental curves were fitted using an artificial neural network (ANN) approach followed by a Surface Response Methodology (SRM). Curves at any heating rate between the minimum and maximum experimental heating rates were obtained with high reliability. Finally, Vyazovkin kinetic parameters were tested again with the new curves showing similar kinetic parameters from the experimental ones. In conclusion, due to the capability to learn from the own data, ANN combined with SRM seems to be an excellent alternative to predict TG curves that do not test experimentally, opening the range of applications.

Freezing of gait (FOG), a debilitating symptom of Parkinson’s disease (PD), can be safely studied using the stepping in place (SIP) task. However, clinical, visual identification of FOG during SIP is subjective and time consuming, and automatic FOG detection during SIP currently requires measuring center of pressure on dual force plates. This study examines whether FOG elicited during SIP in 10 individuals with PD could be reliably detected using kinematic data measured from wearable inertial measurement unit sensors (IMUs). A general, logistic regression model (AUC = 0.81) determined that three gait parameters together were overall the most robust predictors of FOG during SIP: arrhythmicity, swing time coefficient of variation, and swing angular range. Participant-specific models revealed varying sets of gait parameters that best predicted FOG for each participant, highlighting variable FOG behaviors, and demonstrated equal or better performance for 6 out of the 10 participants, suggesting the opportunity for model personalization. The results of this study demonstrated that gait parameters measured from wearable IMUs reliably detected FOG during SIP, and the general and participant-specific gait parameters allude to variable FOG behaviors that could inform more personalized approaches for treatment of FOG and gait impairment in PD.

Bayesian model calibration techniques are commonly employed in the characterization of nonlinear dynamic systems, as they provide a conceptual and effective framework to deal with model uncertainties, experimental errors and procedure assumptions. This understanding has resulted in the need to introduce a model discrepancy term to account for the differences between model-based predictions and real observations. Indeed, the goal of this work is to enhance model-driven Structural Health Monitoring procedures by incorporating the posterior uncertainty linked to updated model discrepancy, and thus make relevant considerations for its use in the Structural Health Monitoring. Specifically, the Bayesian inference has been applied to the calibration of nonlinear hysteretic systems to both provide: (i) most probable values (MPV) of the parameters following the calibration, and; (ii) estimates of the model discrepancy posterior distribution. The effect of the model discrepancy in the calibration is first illustrated recurring to a single degree of freedom Bouc-Wen type oscillator, and then applied for calibrating a reference nonlinear Bouc-Wen model, deriving from real data acquired on a monitored masonry building.

It is widely, but not universally, believed that the lipids of the plasma membrane are not uniformly distributed, but that "rafts'' of sphingolipids and cholesterol float in a "sea'' of unsaturated lipids. The physical origin of such heterogeneities is often attributed to a phase coexistence between the two different domains. We argue that this explanation is untenable for several reasons. Further we note that the results of recent experiments are inconsistent with this picture. However they are quite consistent with an alternate explanation, namely that the plasma membrane is an emulsion of the two kinds of regions. To show this, we briefly review a simplified version of this theory and its phase diagram. We also explicate the dependence of the predicted domain size on four physical parameters. Among them are the spontaneous curvature of the membrane and its bending modulus and surface tension. Taking values of the latter two from experiment, we obtain domain sizes for several different cell types that vary from 58 to 88 nm.

Water quality retrieval for small urban waterbodies by remote sensing get used to be difficult due to coarse spatial resolution of the remote sensing imagery. The recently launched Sentinel-2 produces imagery with a spatial resolution of 10 m. It provides an opportunity to solve the problem of retrieving water quality for small waterbodies. Additionally, many water management issues also require fine resolution of imagery, e.g. illegal discharge to an urban waterbody. Since illegal discharges are an important issue for urban water management, chemical oxygen demand (COD), total phosphorous (TP), and total nitrogen (TN) were chosen as the target parameters for water quality retrieval in this study. COD, TP and TN, however, are non-optically active parameters. There were limited studies in the past to retrieve these parameters in comparison with optically active parameters, e.g. Chlorophyll-A etc. This study compared three machine learning models, namely Random Forest (RF), Support Vector Regression (SVR), and Neural Networks (NN), to investigate the opportunity to retrieve the above non-optically active parameters. Results showed that R² of TP, TN, and COD by NN, RF and SVR were 0.94, 0.88, and 0.86, respectively. The performances of water quality retrieval for these non-optically active parameters were significantly improved by the optimized machine learning models. These models hence solved the problem to use remote sensing data to retrieve these non-optically active water quality parameters and provided a new monitoring strategy for small waterbodies. Water quality mapping obtained by Sentinel-2 imagery provided a full spatial coverage of the water quality characterization for the entire water surface. Compared with water samples collecting and testing, it greatly reduced labor cost, reagents cost, and waste treatment cost. It also may help identify illegal discharges to urban waterbodies. The method developed in this research provides a new practical and efficient water quality monitoring strategy in managing water with consideration of environmental sustainability.

This paper presents the results of investigations of the effects of hot deformation parameters in compression investigation on the austenite grain size in HSLA steel (0.16% C, 0.037% Nb, 0.004% Ti, 0.0098% N). The axisymmetric compression investigations were performed on cylindrical investigation specimens of d=1.2 using the Gleeble 3800 simulator. The strain rate=1s^-1÷15.9s^-1 and strain degree ε=1.2. Before deformation, the research specimens were austenitized at TA = 1100 ÷ 1250 °C. Metallographic observations of the primary austenite grains were conducted with an optical microscope, while the structure of dynamically recrystallized austenite, inherited by martensite, was examined by EBSD technique using a scanning electron microscope. Based on the analysis of investigation results, it was found that the size of dynamically recrystallized austenite grains in HSLA steel were clearly affected by hot compression parameters. In contrast, no significant impact of austenitising temperature on their size was found.

A field experiment to assess the effect of mulch on growth (days to maturity, plant height, leaf length and leaf number) of Garlic (Allium Sativum L.) was conducted in 2015 - 2016 at Addis Ababa University Selale campus, on demonstration field to identify optimum plant growth using different mulches for Garlic tested independently. The experiment was designed using randomized complete block. The analyzed result using ANOVA shows significance difference among the treatments. Plots treated with black polyethylene mulch and grass mulch enhanced maturity by about 114 and 116 days, respectively, while garlic in control showed slightly delayed maturity of 125 days. Maximum plant height (66.5 cm) was recorded in the plants mulched by black polyethylene mulch followed by grass mulch which records 62.3 cm and 52.3 cm, respectively. A highly significant variation (p<0.05) in the leaf length was observed at the different mulch treatments. Significantly maximum leaf number (15.3) was recorded in plants mulched with black polyethylene followed by grass mulch with 14.0 leaf number. Thus, black polyethylene and grass mulch performs better than control treatment in growth parameter evaluation of garlic plants under fiche condition.

In wideband radar systems, the performance of motion parameters estimation can significantly affect the performance of object detection and the quality of inverse synthetic aperture radar (ISAR) imaging. Although the traditional motion parameters estimation methods can reduce the range migration (RM) and Doppler frequency migration (DFM) effects in ISAR imaging, the computational complexity is high. In this paper, we propose a new fast non-searching motion parameters estimation method based on cross-correlation of adjacent echoes (CCAE) for wideband LFM signals. A cross-correlation operation is carried out for two adjacent echo signals, then the motion parameters can be calculated by estimating the frequency of the correlation result. The proposed CCAE method can be applied directly to the stretching system, which is commonly adopted in wideband radar systems. Simulational results demonstrate that the new method can achieve better estimation performances, with much lower computational cost, compared with existing methods. The experimental results on real radar data sets are also evaluated to verify the effectiveness and superiority of the proposed method compared to the state-of-the-art existing methods.

(1) Background : Low dietary intake of calcium, vitamin D, vitamin C and magnesium has been associated with increased risk of osteoposrosis. The purpose was to evaluate changes in biomarkers of bone metabolism, and cardiometabolic health in postmenopausal women, with high risk of osteoporosis, followed by a nutritional intervention program. (2) Method: It was a prospective randomized controlled trial. A sample of 115 apparently healthy postmenopausal women(45 -75 years of age) randomized into four groups: (I) nutritional intervention group(n=40) received daily 1000mg vitamin C, 500mg vitamin D3, 500mg calcium(Ca) and 300mg magnesium (Mg); (II) control group(n=42) received daily 500mg vitamin D3, 500mg Ca and 300mg Mg; (III) nutritional intervention group (n=18) received daily 150mg bisphosphonates, 500mg vitamin D3, 500mg Ca and 300mg Mg; and (IV) nutritional intervention group (n=15) received daily about 364 mg polyphenols via an innovative functional food (50g olive paste enriched with mountain tea extract) along with 500mg vitamin D3, 500mg Ca and 300mg Mg. Groups I -III received supplementation for a year whereas group IV for 5 months. Changes in calciregulatory hormone parathormone (PTH) were evaluated at the beginning of the study as well as at 5 and 12 months intervals. Blood levels of vitamin D, vitamin C, Ca, Mg and the lipid profile were assessed at the beginning and at the end of the study. Anthropometric indices (weight, body fat(Kg), Body Mass Index(BMI) and bone mineral density(BMD) were evaluated at the beginning and at the end of the study. Statistical analysis was performed with IBM-SPSS Statistics-21. The level of statistical significance was set at p<0.05. (3) Results: 25(OH)D3 levels were improved, in groups II, III and IV (+3,71% and +1.45% and +5.62% respectively). PTH levels were increased at the end of the intervention period, for groups I and IV. Significant positive changes recorded, in total BMD, in all four study groups. Significant beneficial changes for total cholesterol was observed in group IV (-2.07%, P<0.05) and positive changes in group I for HDL biomarker (+61.62%, P<0.05) (4) Conclusions:. Additional larger-scale clinical trials and intervention studies are considered essential, in order to fully investigate and elucidate associations between dietary components and biochemical indices of bone metabolism.

In this paper, comprehensive analysis of combined effect of major influencing parameters on heat transfer in the single U-tube BHE (sBHE) and double U-tube BHE (dBHE) with two independent circuits was performed by using validated numerical heat transfer model. Geometrical parameters, such as shank spacing (with maximum, average and minimum values) and borehole diameter (large, medium and small borehole sizes) and borehole depth (shallow, average and deep borehole depths) as well as thermal conductivity of soil and grout which ranges from minimum to high value were considered. The combined impact of these parameters was included under four major cases: 1) combined effect of borehole depth, borehole size and shank spacing; 2) combined effect of borehole depth, and soil and grout thermal conductivity; 3) combined effect of soil and grout thermal conductivity and borehole size; and 4) combined effect of soil thermal conductivity, borehole size and shank spacing. Each of these major cases has nine different design options of both sBHE and dBHE. Series of results of heat transfer per unit borehole depth were generated for all the considered various cases. With the given parameters, the BHE case that provides highest heat transfer among the various cases of sBHE and dBHE were obtained.

In this article, the research team has systematically developed a method to model the kinematics and dynamics of a 3-wheeled robot subjected to external disturbances and sideways wheel sliding. These models will be used to design control laws that compensate for wheel slippage, model uncertainties, and external disturbances. These are control algorithms developed based on Dynamic Surface Control (DSC). Adaptive trajectory tracking DSC algorithm using fuzzy logic system (AFDSC) and radial neural network (RBFNN) with fuzzy logic system to overcome the disadvantages of DSC and expand the application domain for wheeled Mobile Robots (WMR). However, this Adaptive Fuzzy Neural Network Dynamic Surface Control (AFNNDSC) adaptive controller ensures the closed system is stable and follows the preset trajectory in the presence of wheel slippage model uncertainty and is affected by significant amplitude disturbances. The stability and convergence of the closed-loop system are guaranteed based on the Lyapunov analysis. The AFNNDSC adaptive controller is evaluated by simulation on MATLAB/Simulink software and in a steady state. The maximum position error on the right wheel and left wheel is 0.000572 (m) and 0.000523 (m), and the angular velocity tracking error in the right and left wheels of the control method is 0.000394 (rad/s). The experimental results show the correctness of the theoretical analysis, the effectiveness of the proposed controller, and the possibility of practical application.

Eurytoma erythrinae Gates & Delvare (Hymenoptera: Eurytomidae), is an important biological control agent of the erythrina gall wasp (EGW), Quadrastichus erythrinae Kim (Hymenoptera: Eulophidae), an invasive species native likely originating in eastern Africa, that is a threat to Erythrina trees in Hawaii and worldwide. Thousands of Erythrina trees in Hawaii succumbed to EGW since 2005 and died within few years of infestation. The endemic wiliwili tree, Erythrina sandwicensis, an important component of Hawaii’s dry forests, and one of few deciduous native trees were severely impacted by this wasp. Early during the invasion by EGW it became evident that the endemic species may be driven to extinction, and exploration programs for natural enemies of the EGW started in December 2005. East Africa was selected as the start point for natural enemy exploration owing to high native Erythina species richness. Several gall formers were found in Tanzania and a putative color variant type of Q. erythrinae was detected in association with three ectoparasitoids. During January 2006, the dominant parasitoid of this gall former was introduced to Hawaii and described as the new species, E. erythrinae. It was found in Ghana, and South Africa attacking other gall wasp species on Erythrina. Eurytoma erythrinae was a voracious ectoparasitoid feeding as a predator on 1 – 5 adjacent EGW immatures to complete its development. Host specificity studies that included seven non-target gall-forming species showed no evidence of attraction or parasitism by this parasitoid. Mean ± SEM longevity of host deprived females (40.4 ± 2.2 days) was significantly higher than males (20.5 ± 1.1 days). Host feeding enhanced longevity of ovipositing female (51.3 ± 1.5 days). Female’s peak fecundity (105 – 239 offspring /female), host feeding biology, short life cycle (18.4 ± 0.1 days), and synchronization with the host, were additional desirable attributes of E. erythrinae. The parasitoid was approved for field release in Hawaii in November 2008. A total of 3998 wasps were distributed on six Hawaiian Islands, with establishment in less than a year. Impacts on high density infestations of EGW were sufficient to prevent tree deaths. Limited rates of parasitism on low density galled leaves, flowers, and seedpods necessitated the consideration for releasing a second parasitoid, Aprostocetus nitens (Hymenoptera: Eulophidae). We report on the reproductive characteristics, and host specificity of E. erythinae that could be of importance for classical biocontrol programs in areas with EGW problem.

Per- and polyfluoroalkyl substances (PFASs) are a group of fluorinated, organic, man-made chemicals; they do not occur naturally in the environment. This study aimed to determine the profile and content of PFASs in volunteers’ blood plasma and urine after fermented red beetroot juice consumption and correlated it with the blood parameters. During 42 days, 24 healthy volunteers intake 200 mL/60 kg of body weight fermented red beetroot juice. PFASs were analyzed using micro-HPLC-MS/MS method. Five perfluoroalkyl substances were found in human body fluids. After juice consumption, PFASs, due to the consumption of food contaminated with them, was discovered that for perfluorocarboxylic acids, a downward trend was observed, while for perfluoroalkane sulfonates, their plasma content showed a statistically significant upward trend. Analysis of the hematology parameters indicated that the intake the fermented red beetroot juice showed a significant decrease in mean corpuscular volume (MCV), platelets concentration, mean platelet volume (MPV), platelet large cell ratio (P-LCR) at the significance level p < 0.01, and he-matocrit (p < 0.05). On the other hand, the dietary intervention also indicated a significant (p < 0.01) increase corpuscular/ cellular hemoglobin concentration (MCHC). In the case of blood biochemi-stry, no significant change in blood samples after intake the fermented beetroot juice was observed. However, a decreasing tendency of total cholesterol and low-density lipoprotein concentration (LDL-C) were observed. Based on the presented results, there is a need to analyze and monitor health-promoting food regarding undesirable substances and their impact on consumer health.

Diets that restrict the amount of carbohydrates positively affect markers related to metabolic syndrome (MS). However, completely carbohydrate-free diets have been studied in lesser extent, being their effect on biochemical and morphometric parameters in a rat model of MS the main objective of this study. MS was induced by a high-glucose diet for 20 weeks in male Wistar rats with a subsequent exposition to an essentially carbohydrate-free diet (CFD) for 20 weeks. Daily measurements of food consumption and monthly measurements of body weight were made. At week 40, glucose, insulin, lipid profile, ketone bodies, C-reactive protein (CRP), aspartate aminotransferase (AST), alanine aminotransferase (ALT), urea, creatinine, liver and muscle glycogen, and serum, hepatic, renal and pancreatic malondialdehyde (MDA) were assessed. Exposition to CFD showed decrease in caloric intake and body weight. Likewise, the group showed normalization in liver and serum MDA parameters, insulin, lipid profile, ALT, liver glycogen, and creatinine. The CFD decreased glucose concentration and the inflammatory state, also, increased the concentration of ketone bodies and urea. The change towards CFD reverses the metabolic alterations generated with MS except for glycemia and uremia, probably due to the high rate of gluconeogenesis generated by the high protein content in the diet.

The main result of this work is the estimation of the entropy mode accompanying a wave disturbance, observed at the atmosphere heights range of 90-120km. The study is the direct continuation and development of recent results on diagnosis of the acoustic wave with the separation on direction of propagation. The estimation of the entropy mode contribution relies upon the measurements of the three dynamic variables (the temperature, density and vertical velocity perturbations) of the neutral atmosphere measured by the method of the resonant scattering of radio waves on the artificial periodic irregularities of the ionospheric plasma. The measurement of the atmosphere dynamic parameters has been carried out on the SURA heating facility. The mathematical foundation of the mode separation algorithm is based on the dynamic projecting operator technique. The operators are constructed via the eigenvectors of the coordinate evolution operator of the transformed system of balance equations of the hydro-thermodynamics.

The study assessed the changes in the quality and physical and chemical parameters of apples of four cultivars (‘Gala’, ‘Idared’, ‘Topaz’, ‘Red Prince’) subjected to mechanical vibrations during transport under model conditions and after storage (shelf-life). Quality changes in apples were evaluated based on skin and flesh colour, total soluble solids, dry matter, firmness, titratable acidity, pH value, total polyphenol content and antioxidant capacity. The applied vibrations at a frequency of 28 Hz caused changes in the above parameters, which were visible also after storage and depended on cultivar, but did not show any clear trend or direction. Skin colour varied whereas flesh colour remained stable. Vibrations resulted in a decrease in firmness. The greatest stability of quality parameters, the highest content of bioactive compounds and the highest antioxidant capacity were observed for ‘Red Prince’ and ‘Topaz’ apples – this refers to the control and treated samples before and after storage. However, total polyphenol content and antioxidant capacity increased in all studied cultivars as a result of vibrations and storage, which suggests that 28 Hz mechanical vibrations and short-term cold storage did not reduce the health promoting potential of the apples.

The dessert banana is a popular fruit worldwide, but its ripening process is greatly accelerated by high temperatures, which eventually leads to an unpleasant taste and the appearance of spots on the skin of the fruit. To slow down the ripening of bananas, expensive strategies are used, which are usually not practical for conventional farmers in less developed countries. In this study, we try to find a less costly alternative. Therefore, the effects of coatings of lemon peel extract (2.5 %, 5 %, and 10 %), calcium chloride (4 %), and glycerol (2 %) on the shelf life and postharvest quality of banana fruit (Cavendish) stored at 20 ± 3 °C and 50 – 70 % relative humidity were investigated. Treatment with a mixture of 2.5 % lemon peel extract and 2 % glycerol resulted in an extension of the shelf life of the dessert banana by up to 6 days and no detectable fungal infestation. The mixture is an effective alternative to extend the shelf life and reduce quality losses in bananas.

The main objective of this this cross-sectional study was to analyze the influence of lifestyle fac-tors (diet, physical activity, sleep), which can affect the concentrations of fecal short-chain fatty acids (SCFAs) and SCFAs potential role in modulating cardiometabolic disease risk by interact-ing with biochemical and body composition parameters. The study comprised 77 healthy, non-obese individuals, aged 30-45 years who were assessed in the light of SCFAs concentration in stool, diet, physical activity level and sleep duration. Moreover, body composition measurement and patients’ biochemical parameters were included in the analysis. We have indicated a signifi-cant negative correlation between several SCFAs [especially acetic acid (AA), isobutyric acid (IBA), butyric acid (BA), isovaleric acid (IVA) and valeric acid (VA)] with BMI, VAT/SAT ratio (visceral to subcutaneous fat ratio) and percentage of fat mass in a group of females enrolled in the study as well as with waist circumference (WC) in case of both sexes included in the study. Moreover, the results of our study acknowledged the importance of a diet in shaping SCFAs pro-file - we noticed the significant negative associations between energy and fat intake and some SCFAs in males [IBA, IVA, VA, isocaproic acid (ICA)]. In terms of fiber intake, we noticed elevat-ed concentrations of vast majority of SCFAs and amount of SCFAs in total in case of both sexes included in the study. These strong correlations reflect the fact that diet shapes the composition of the gut microbiota and SCFAs (main microbial metabolites) are synthesized from dietary fiber. Furthermore, we noticed that in a group of women, the concentration of AA, propionic acid (PA) and ICA as well as the total concentration of SCFAs showed a significant positive association with their sleep duration. We concluded that SCFAs can have a potential role in modulating car-diometabolic disease risk by interacting with adiposity parameters and diet. In addition, this potential direct link between diet and SCFAs may at least partly contribute to sleep improvement.

Emollients are valued ingredients of many cosmetic products and medical devices used to support the treatment and prevention of many skin diseases. Despite the fact that they are one of the oldest cosmetic ingredients, raw materials as well as new recipe solutions are constantly being sought, the main goal of which is to obtain products with the most favorable physicochemical properties while improving the hydration of the stratum corneum and softening and smoothing the skin. This article presents the results of physicochemical tests of selected emollients: natural [Macadamia Integrifolia Seed Oil, Ricinus Communis Seed Oil, Prunus Amygdalus Dulcis, Vitis Vinifera (Grape) Seed Oil], semi-synthetic Caprylic/Capric Triglyceride and synthetic (Octyldodecanol, Dicaprylyl Carbonate, Dibutyl Adipate). Then, recipes for cosmetic oils were developed, differing in the type and concentration of emollients used. The obtained formulations were subjected to physicochemical tests (dynamic viscosity, surface tension, wetting angle, color assessment) and selected parameters of the epidermal barrier function (skin hydration and lubrication) were assessed. By appropriately selecting the type and concentration of emollients in the cosmetic oil recipe, it is possible to obtain products with the appropriate ability to spread on the skin, form a uniform protective layer on the skin and remain on the skin for a sufficiently long time. The observed improvement in skin hydration and the level of lubrication after using formulations containing mixtures of natural and semi-synthetic/synthetic emollients confirms that both groups of these raw materials can be components of cosmetic body oil recipes with an emollient effect, and the products themselves constitute an important element of the care of skin affected by the disease process.

The Langmuir isotherm is a widely used model for analyzing adsorption equilibrium data. This study evaluated the efficiency and accuracy of all four linear forms of the Langmuir isotherm and its non-linear form using 67 experimental data sets selected from the literature. The results showed that only if all four linear forms simultaneously show high accuracy, then the non-linear form also shows high accuracy, and therefore it can be said that the process probably follows the Langmuir isotherm. On the contrary, when at least one of the four linear forms of the Langmuir isotherm has low accuracy, it means that the non-linear form also has low accuracy, and it can be concluded that this process does not follow the Langmuir isotherm. This research suggests that all four linear forms of the Langmuir isotherm should be evaluated simultaneously to conclude whether the studied system follows the Langmuir isotherm or not. In other words, relying on only one of the four linear forms of the Langmuir isotherm to model adsorption and calculate the Langmuir constant and maximum adsorption capacity is an incomplete approach, contrary to the conventional approach.

Software-In-The-Loop (SITL) simulation tools have been extensively used in development of safety-critical software. Utilizing these tools substantially accelerates software development eliminating potential risks and resource costs of physical experiments. This paper investigates the effects of model specific parameters on the development and testing of custom module in PX4 SITL environment. Models of a fixed-wing unmanned aerial vehicle with vertical takeoff and landing capabilities and steerable sensor platform/gimbal are used as case study for this investigation. The effects of parameters of these aerial vehicle and sensor platform models are taken into consideration in the development of custom module that controls the dynamics of steerable sensor platform mounted on the vehicle model. The work also presents steps necessary to customize PX4 SITL and Gazebo simulation environment to incorporate parameters of the vehicle and sensor platform models in the development and testing process of custom module. Based on these instances, simulation results are obtained and discussed. The results show that reliability of PX4 SITL simulation framework is justified by proper customization and integration of PX4 SITL and Gazebo simulator.

The article presents the influence of ecological agents, i.e. the effective microorganisms and silver compounds addition to lubricating oil on operating parameters of an internal combustion engine. The basic diagnostic parameters of a piston engine determining its technical condition were described. In the further part, the research stand and materials were presented. In the main part of this article for pure oil compared to oil with the effective microorganisms and silver compounds addition were shown. It was found that the addition of effective microorganisms and silver compounds to the oil reduces the emission of toxic components into the atmosphere along with the exhaust gases, while the remaining engine operating parameters for each load value show that these additives do not cause deterioration of the technical condition of the tested engine. Of all the agents used, the best results are obtained with the addition of ceramic tubes, because it is an additive that does not affect the properties of the oil in its composition. The advantage of ceramic tubes is the slow release of effective microorganisms, which has an effect on the parameters of the oil and thus on the operation of the engine. In further research, it will be checked how these additives affect the anti-seize and anti-wear properties of the lubricating oil used, which should give a broader view of the impact of these additives on the technical condition of the operated piston engine.

The process of Thermal spray is effective for creating a metal matrix composite (MMC) by embedding zirconium diboride reinforcement into a molybdenum matrix. This allows for the combination of beneficial properties in a new composite, as both materials have a high The materials Mo and ZrB2 possess different characteristics. For example, Mo has a melting point of 2622 ◦C while ZrB2 has a higher melting point of 3246 ◦C. Additionally, Mo has a high thermal conductivity of 139 W/m◦C compared to ZrB2's thermal conductivity of 24 W/m◦C. However, both materials have good thermal shock resistance, and Mo has a low coefficient of thermal expansion of 5.35 µm/m◦C while ZrB2 has a coefficient of thermal expansion of 5.8 × 10−6 K−1., as well as the ability to maintain strength at elevated temperatures and stability in extreme environments. The study focused on creating Mo/Zrb2 composites using a thermal spray coating technique, varying the parameters of spraying distance, number of passes, and gas pressure, and testing the resulting castings to evaluate their hardness and Young's Modulus. The primary objective of the research was to use the Taguchi technique for identifying the optimal parameters for generating the highest Young's Modulus and hardness for the castings. The Taguchi method integrates experimental and analytical principles to identify the most significant parameter affecting the response, which can significantly enhance overall performance. The study found that the optimal parameters were a spraying distance of 20 cm, gas pressure of 6 bar, and the number of passes of 18. The Taguchi method accurately predicted the parameters that produced the highest properties for the composite coatings, which demonstrated good surface formation without hot cracks and fewer pores, with well-formed metallurgical bonding between the coating and the substrate.

Introduction Kasai procedure in children with biliary atresia (BA) is associated with several complications in the short-term. The Comprehensive Complication Index (CCI) is a validated metric in adult surgery for the analysis of complication and morbidity in surgical patients. We aimed to analyze the CCI for the first time in BA infants and to corelate its association with the outcome. Material and Methods Retrospective review of medical records of infants with type III BA undergoing Kasai procedure between January 2011 and December 2021 at our institution. All unexpected events were ranked according to the Clavien-Dindo classification and the CCI per patient was subsequently calculated. Clavien-Dindo grades, individual events, the CCI and the total event number per patient were correlated with the one- and two-year outcome post Kasai. Results 131 events were identified in 101 patients (range 0 – 11 per patient). Forty-four Grade I (33.6%), 67 Grade II (51.1%), 18 Grade III (13.7%) and two sentinel events [> Grade IV] (1.5%) were documented according to Clavien-Dindo, including one death in a cardiac-associated BA patient. None of the complications correlated significantly with a poor outcome. Sixty-three (62.4%) CCI were calculated (range 0 – 100). The mean CCI during the in-patient treatment post Kasai, was significantly higher in patients with a poorer outcome compared to patients with native liver survival at one- and two-year follow-up (22.7 21.7 vs 13.2 18.1; p=0.02). Conclusion Not the severity of complications, but the accumulation of numerous events related to Kasai procedure are associated with a poorer outcome. Therefore, the CCI is an excellent instrument for the postoperative morbidity assessment of BA patients.

The vulnerability of vegetation in the Middle East to meteorological conditions and climate change, especially those leading to drought, is high. Despite the importance of the Amu Darya and Kabul River Basins (ADB and KRB) as a region in which more than 15 million people live, and its vulnerability to global warming, only several studies addressed the issue of the linkage of meteorological parameters on vegetation for the eastern basins of Afghanistan. In this study, data from the Moderate Resolution Imaging Spectroradiometer (MODIS), Global Precipitation Measurement Mission (GPM), and Land Data Assimilation System (GLDAS) to examine the impact of meteorological parameters on vegetation for the eastern basins of Afghanistan for the period from 2000 to 2021. The study utilized several indices, such as Precipitation Condition Index (PCI), Temperature Condition Index (TCI), Soil Moisture Condition Index (SMCI), and Microwave Integrated Drought Index (MIDI). The relationships between meteorological quantities, drought conditions, and vegetation variations were examined by analyzing the anomalies and using regression methods. The results showed that the years 2000, 2001, and 2008 had the lowest vegetation coverage (VC) (56, 56, and 55% of the study area, respectively). On the other hand, the years 2010, 2013, 2016, and 2020 had the highest VC (71, 71, 72, and 72% of the study area, respectively). The trend of the VC for the eastern basins of Afghanistan for the period from 2000 to 2021 was upward. High correlations between VC and soil moisture (R = 0.70, p = 0.0004), and precipitation (R = 0.5, p = 0.008) were found, whereas no significant correlation was found between VC and drought index MIDI. It was revealed that soil moisture, precipitation, land surface temperature, and area under meteorological drought conditions explained 45% of annual VC variability.

The coronavirus disease 2019 (COVID-19) pandemic has led to wastewater surveillance becoming an important tool for monitoring the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within communities. As a result, molecular methods, in particular reverse transcription-quantitative PCR (RT-qPCR), have been employed to generate large data sets aimed at the detection and quantification of SARS-CoV-2 in wastewater. Although RT-qPCR is rapid and sensitive, there is no standard method that fits all use cases, there are no certified quantification standards and experiments are carried out using numerous different assays, reagents, instruments, and data analysis protocols. These variations can lead to the reporting of erroneous quantitative data resulting in potentially misleading interpretations and conclusions. We have reviewed the SARS-CoV-2 wastewater surveillance literature focusing on the variability of RT-qPCR data as revealed by inconsistent standard curves and associated parameters. We find that variation in these parameters and deviations from best practices as described in The Minimum Information for Publication of Quantitative Real-Time PCR Experiments (MIQE) guidelines suggest a lack of reproducibility and reliability in quantitative measurements of SARS-CoV-2 RNA in wastewater.

This work investigates how the user-controlled parameters of the 3D printing process define temperature conditions on the boundary between layers of the part being fabricated and how these conditions influence the structure and strength of the part. The process studied is fused filament fabrication with a desktop 3D printer and the material utilized is PLA (polylactic acid). As a characteristic of the part strength the fracture load in the case of a three-point bend and calculated related stress were used. During the printing process parts were oriented with the long side along the Z axis, thus, in the bend tests, the maximum stress occurred orthogonally to the layers. During the fabrication process, temperature distribution on the sample surface was monitored with thermal imager. Sample mesostructure was analyzed using SEM. The influence of the extrusion temperature, the intensity of part cooling, the printing speed and the time between printing individual layers were considered. The influence of all the parameters can be expressed through two generalizing factors: the temperature of the previous layer and the flow efficiency, determining the ratio of the amount of extruded plastic to the calculated. A regression model was proposed that describes the effect of the two factors on the printed part strength. Along with interlayer bonding strength, these two factors determine the formation of the part mesostructure (the geometry of the boundaries between individual threads). It is shown that the optimization of the process parameters responsible for temperature conditions makes it possible to approximate the strength of the interlayer cohesion to the bulk material strength.

Sleep quality is known to affect automatic and executive brain functions such as gait control and cognitive processing. This study aimed to assess the effect of dual tasks on gait spatiotemporal parameters among young adults with good and poor sleep quality in the United Arab Emirates. In total, 65 young adults with a mean age of 21.1±2.5 were assessed for gait analysis during single-task and dual-task conditions. The participants’ sleep quality was assessed using the Pittsburgh Sleep Quality Index (PSQI), and gait was assessed using the BTS Gaitlab System. The participants were asked to walk at natural speed as a single-task condition, followed by walking while performing a cognitive task as a dual-task condition. The parameters assessed included the gait velocity (m/s), cadence (steps/min), step width (m), and stride length (m). The DTC on each gait parameter was calculated. The Mann–Whitney U test was used to compare the differences in the DTC on gait variables between the good and poor sleep quality groups, and the Spearman correlation test was used to assess the correlation between total PSQI scores and the DTC. At a significance level of p&lt;0.05, a significant difference in cadence between the two sleep quality groups was observed, in addition to a positive correlation between sleep quality and the DTC effect on gait mean velocity, cadence, and stride length. Our findings also revealed a greater DTC on participants with poorer sleep quality. These findings contribute to our understanding of the significance of sleep quality in gait performance while multitasking in younger populations.

The effect of varying concentrations of crude oil pollution on the germination and growth parameters of Mucuna pruriens (Var. cochinchinenesis) was investigated. The following treatments were used; 0ml, 100ml, 200ml, 400ml, 800ml 1600ml respectively. The germination of velvet bean was 100% but growth was found to be inhibited by a wide range of treatments (800ml and 1600ml). the lag phase of proceeding growth is also reduced at this treatment. Growth inhibition is attributed primarily to the characteristics of oil, which acts as a physical barrier to water and oxygen uptake. Reduction in the growth and development of plants was observed in the polluted treatments as against the control (non–polluted treatment) because of the deleterious effect of the petroleum products on the morphological parameters (plant height, number of leaves and leaf area) tested for. Velvet beans treated with lower treatment (100ml and 200ml) were observed to be more productive when compared to the control experiment. Consequently, as the crude oil exceeds the plant absorbing capacity at 800ml and 1600ml respectively, the growth retards, chlorosis, presence of tough apical meristem, and defoliation from the base of the plant.

The use of antibiotics as growth promotors or for the prevention of some poultry diseases has face global concern and serious criticism. Their addition to poultry feed show hazardous effects including development of antimicrobial resistance and the potential harmful effect on humans’ health. To eliminate these threats, there is increasing interest to search for natural alternatives. Plant derivatives such as garlic (Allium sativum L.) and its derivatives are nowadays extensively used in poultry production system. Dietary supplementation of broilers and layers with garlic induced improvement of production parameters, carcass quality, and intestinal integrity. Modulation of the immune response against important viral diseases and increasing the immune organs body weight ratio resulting from supplementation of poultry with garlic. Moreover, garlic showed modulation of gut health through the antibacterial and antiparasitic activities. Treatment with garlic also can mitigate the oxidative stress and reduce the free radicals production. Reduction of cholesterol level, but improvement of some liver and blood parameters were also reported following dietary inoculation of garlic. This review was designed to search on the impact of garlic as feed additives on performance, immunity, gut health, antioxidant status, and blood parameters of poultry.

We conducted this study to determine the potential cryopreservative effects of different hesperidin (vitamin P; HSP) doses on ram semen after freeze-thawing. Semen samples were obtained from Sönmez rams by an artificial vagina. The samples were divided into six groups: control, 10, 50, 100, 250, and 500 µg/mL HSP (C, HSP10, HSP50, HSP100, HSP250, and HSP500, respectively). At the end of the study, sperm motility and kinetic parameters, plasma membrane acrosome integrity (PMAI), high mitochondrial membrane potential (HMMP), viability, lipid peroxidation levels (LPL), chromatin damage, oxidant parameters, and antioxidant parameters were assayed. None of the doses of HSP added to the semen extender showed any enhancing effect on progressive motility compared to C (p>0.05). In fact, HSP500 had negative effects (p<0.05). Moreover, PMI activities were the highest at the HSP10 dose, while LPL values were the lowest (p<0.05). The doses of HSP10 and HSP50 added to the Tris extender medium showed positive effects on spermatozoon chromatin damage. Consequently, we can say that HSP doses used in this study are not effective on semen progressive motility, but the HSP10 dose is effective on PMAI and chromatin damage by reducing LPL.

The disruption in healthcare attention to people with alcohol dependence, along with psychological decompensation consequence of lockdown derived from COVID-19 pandemic, could have a negative impact on people who suffers from alcohol abuse disorder. Retrospective observational study of 9,966 men aged ˃16 years registered as having diagnosis of alcohol abuse disorder in the electronic medical records (EMR) of the Aragon Regional Health Service (Spain). Of those who were not infected during the study period (9,576), clinical (Glutamate-oxaloacetate -GOT-, Glutamate pyruvate -GPT-, creatinine, glomerular filtration, systolic blood pressure -SBP-, diastolic blood pressure -DBP-, total cholesterol, LDL, HDL, triglycerides, and body mass index -BMI-), pharmacological (dose per inhabitant per day -DHD- of drugs used in addictive disorders, benzodiazepines and antidepressants) and health resource use variables (primary and specialized care) were considered. Student´s T-test for matched samples was performed. After carrying out the Levene´s test, the Student´s T-test was used to analyze the changes in clinical variables between alcohol abuse disorder patients with and without COVID-19. Only creatinine and LDL show a significant but clinically irrelevant changes just after and 6 months after the end of strict lockdown. The total number of DHDs for all drugs included in the study (except for Benzodiazepines), decreased. In the same way, the use of health services by these patients also decreased. The impact of COVID-19 among this group of patients has been moderate. The reorganization of health and social services after the declaration of the state of alarm in our country, made possible the maintenance of care for this vulnerable patients.

Background: Sacubitril/valsartan has been shown to be superior to enalapril in reducing the risks of death and hospitalization for heart failure (HF). However the effect on cardiac performance remains unknown. We sought to evaluate the effects of sacubitril/valsartan on clinical, bioumoral and echocardiographic parameters in patients with HFrEF. Methods: Sacubitril/valsartan was administered to 205 HFrEF patients. Results: Among 230 patients (mean age 59 ± 10 years, 46% with ischemic heart disease) 205 (89%) completed the study. After a follow–up of 10.49 (2.93±18.44) months, the percentage of patients in NYHA class III changed from 40% to 17% (p<0.001). Median N–Type natriuretic peptide (Nt-proBNP) decreased from 1865 ± 2318 to 1514 ± 2205 pg/mL, (p=0.01). Furosemide dose reduced from 131.3 ± 154.5 to 120 ± 142.5 (p=0.047). Ejection fraction (from 27± 5.9% to 30 ± 7.7% (p<0.001) and E/A ratio (from 1.67 ± 1.21 to 1.42 ± 1.12 (p=0.002)) improved. Moderate to severe mitral regurgitation (from 30.1% to 17.4%; p=0.002) and tricuspid velocity decreased from 2.8 ± 0.55 m/sec to 2.64 ± 0.59 m/sec (p<0.014). CONCLUSIONS: Sacubitril/valsartan induce “hemodynamic reverse remodeling” and in association with Nt-proBNP concentrations lowering improve NYHA class despite a diuretic dose reduction.

The purpose of the research was to obtain information about the necessity and efficiency of the application of localized irrigation to some qualitative indices of plum trees in the nursery, against the background of different fertilization treatments. The expected results to be obtained by applying differentiated rules of irrigation and fertilization will consist in obtaining a healthy, vigorous fruit tree planting material, increasing production in the nursery. With fruit trees in the nursery, as with all cultivated plants, the growth process depends to the greatest extent on the climate and soil conditions available to them. The use of fertilizers in tree culture becomes necessary to renew the reserve of nutrients consumed by plants or leached in depth, then to improve the physical condition, the chemical composition, and the overall state of fertilization of the soil. It is necessary to intervene every year, in several rounds, with fertilizations that ensure, on the one hand, the achievement of a certain level of production, and on the other hand, a certain level and ratio of nutritional elements by returning the amounts of elements easily accessible nutrients extracted with the harvest to be able to maintain, in this way, the fertility of the soil in accordance with the age of the plantation and the level of production. The two varieties of plum studied were Stanley and Cacanska Lepotica, two valuable varieties for the quality of the fruit. During the research, the fertilization treatments had the highest contribution (34.50 %) on the stem diameter, compared to irrigation (20.67 %) and respectively the variety (5.63 %), considering that the variety did not significantly influence the increase in diameter of the grafted trees.

In this study, the influence of the environment on soil conditions, e.g. heavy metals and soil magnetic susceptibility, on the total number of bacteria and the species of Bradyrhizobium in the field cultivation of the soybean variety Lissabon, the seeds of which had been inoculated with HiStick®Soy, were evaluated. Field experiments were carried out with the random plot method on the Cambisol with a texture of silt loam. The experiment consisted of 24 objects in six combinations and four replications using sewage sludge and fly ash. In the soil samples, the total number of bacteria and the number of the species of Bradyrhizobium were determined using the culture-plate method. The total content of heavy metals (Cu, Zn, Cd, Ni, Pb, Cr, Hg, Fe) in the analyzed objects, compared to the limit values, allowed them to be classified as uncontaminated soils despite the application of sewage sludge and fly ash according to the experimental scheme, showed a significant difference between them. The study of the magnetic parameter χ indicated a significant differentiation between objects from 34.0 to 65.8 × 10-8m3kg-1. High correlation coefficients between χ and Fe (r = 0.789), Zn (r = 0.653), Cr (r = 0.617) and TOC (r = 0.949) indicated that the source of these elements was external organic matter. Biological tests (total content of bacteria and species of Bradyrhizobium) in different experimental variants indicated significant relationships between them and showed the resistance of the microbial community in the field cultivation of Lissabon soybean to heavy metal contamination from sewage sludge and fly ash.

This study was conducted to evaluate the yield and quality parameters of milk from 60 indigenous South African goats of different genotypes namely Nguni, Boer and Non- descript reared under a free ranging system. Milk yield and quality parameters (milk fat, protein, lactose, solid non-fat and minerals) from Nguni (10), Boer (10) and Non-descript (10) goats was measured and analysed per week at each stage of lactation. Result showed that, Nguni goats produced (1.2±0.09, 1.3±0.11 and 1.2±0.07 litres per day) more milk (P ˂ 0.05) at early, mid and late stages of lactation than Boer (0.6±0.10, 1.0±0.17 and 0.6±0.09 litres per day) and Non-descript (0.3±0.10, 0.3±0.12 and 0.3±0.09 litres per day) goats, respectively. The mean value of milk fat, protein and lactose content from Nguni goat was (3.98, 3.54 and 5.31); Boer goat (2.9, 3.59 and 5.04) and Non-descript goat (4.05, 3.39 and 5.02), respectively. There was significant effect (P ˂ 0.05) of genotypes on milk fat, milk magnesium and sodium contents of Nguni, Boer and Non-descript goats. It could be concluded that, Nguni goat produced more milk than Boer and Non-descript goats, but the Non-descript goat had higher mean percentage of milk fat compared to Nguni and Boer goats.

Background/Objectives: The latest WHO classification underscores the importance of the complete blood count (CBC) and cell morphology assessment in diagnosing lymphoid neoplasms. This study evaluated the diagnostic role of Research Use Only (RUO) parameters from the BC-6800 Plus Mindray analyzer in differentiating cell chronic lymphocytic leukemia (CLL), acute lymphoblastic leukemia (ALL), and other lymphoproliferative disorders. Methods: CBCs were performed on 90 patients (66% male, median age 67 years) with pathological blood counts (ALL, n=14; CLL, n=47; other lymphoproliferative disorders, n=29) at Novara’s University Hospital. Univariable and multivariable logistic regression assessed the association of basic (WBC, Hb, RDW, NE#, LY#, MO#, PLT) and research cell parameters (NLR, NMR, LMR, NeuX, NeuY, NeuZ, LymX, LymY, LymZ, MonX, MonY, MonZ). Results: In multivariable analysis, Hb (p=0.02), NeuY (p=0.04), and MonY (p=0.01) independently predicted CLL versus ALL, correctly classifying 93.4% of cases (AUC 0.91, 95% CI 0.81-1.0). MO# (p=0.003), LymY (p&lt;0.0001), and MonY (p=0.004) were independent predictors of CLL versus other lymphoproliferative disorders, classifying 77.6% of cases (AUC 0.86, 95% CI 0.78-0.95). NeuZ (p=0.01) and NeuY (p=0.04) independently predicted ALL versus other lymphoproliferative disorders, classifying 93% of cases (AUC 0.98, 95% CI 0.95-1.0). Conclusions: The use of RUO parameters offers valuable, cost-effective support in the early diagnosis of ALL, CLL, and other lymphoproliferative disorders.

Background: Coronary artery disease (CAD) remains a significant global health concern, being one of the most important contributors to morbidity and mortality worldwide. Accurate assessment of coronary lesions is crucial for guiding appropriate interventions and optimizing patient outcomes. Patients with acute myocardial infarction represent a population which is rarely selected in studies of intracoronary hemodynamics. Fractional Flow Reserve (FFR) has emerged as a valuable physiological index for evaluating the functional significance of coronary lesions, although the data of intravascular hemodynamic evaluation in patients with acute myocardial infarction is scarce [1-3]. In recent years, advancements in intravascular imaging techniques, such as Optical Coherence Tomography (OCT), have provided detailed insights into coronary anatomy both in acute or elective settings. [4-7]. Methods: This article aims to explore the correlation between different non-culprit vessel OCT-parameters and FFR value in the patients with recent acute myocardial infarction. The study included 114 patients with acute myocardial infarction (ST elevation myocardial infarction and non ST elevation myocardial infarction)for whom primary PCI (percutaneous coronary intervention) was performed for the culprit lesion. The non-culprit vessels with intermediate coronary stenoses (157 lesions) were evaluated in a staged procedure (during the index hospitalization) with OCT, FFR and revascularization was performed accordingly. Minimal luminal area (MLA) and percent luminal area stenosis (PSA) were analyzed in relation with the FFR value. Results: There is good correlation between OCT-derived parameters and FFR values in patients with recent acute myocardial infarction. Minimal luminal area (MLA) and percent luminal stenosis area (PSA) were independent predictors of FFR< 0,80 in multivariate logistic regression analysis. A value of 2,08 mm2 for the MLA and 76,85 % for the PSA have proved to be the best cut-offs for predicting a FFR< 0,80. Conclusions: OCT parameters are valuable additional tools in current angiographic practice, including patients with acute myocardial infarction, with the ability to bring numerous direct imagistic and indirect hemodynamic information.

Background and Aims: Late diagnosis of sepsis is associated with adverse consequences and high mortality rate. The aim of this study was to evaluate the diagnostic value of hematologic research parameters, that reflect the cell morphology of blood cells, available on the BC 6800 plus automated analyzer (Mindray) for the early detection of sepsis. Materials and Methods: A complete blood count (CBC) was performed by Mindray BC 6800 Plus Analyzer in 327 patients (223 with a confirmed diagnosis of sepsis following sepsis-3 criteria, 104 without sepsis), admitted at the Intensive Care Unit of the Novara’s Hospital (Italy) and in 56 patients with localized infection. Results: In univariate logistic regression, age, Hb, RDW, MO#, NMR, NeuX, NeuY, NeuZ, LymX, MonX, MonY, MonZ were associated with sepsis (p<0.005). In multivariate analysis, only RDW, NeuX, NeuY, NeuZ, MonX and MonZ were found to be independent predictors of sepsis (p<0.005). Morphological research parameters are confirmed to be predictors of sepsis even when analyzing the group with localized infection. Conclusions: In addition to already established biomarkers and basic CBC parameters, new morphological cell parameters can be a valuable aid in the early diagnosis of sepsis at no additional cost.

When wood is thermally modified, several chemical reactions take place that change the chemical and physical properties of the wood. These changes correlate with the degree of modification, which is mostly a function of temperature and duration of modification, and consequently with a mass loss during this process. There is a lack of standardized quality control to verify the degree of heat treatment of wood and thus its quality. One of the possible methods to check the degree of thermal modification of a particular type of wood is thermogravimetry (TG). It is based on the assumption that processes that did not take place during thermal modification continue when the TG experiment is carried out. In this method, calibration curves have to be established based on TG measurements of standard samples that have been thermally modified at different temperatures and whose mass loss during modification is known. The calibration curves show the mass loss during the TG measurement as a function of the mass loss during the previous thermal modification. The course of thermal decomposition during the TG measurements is influenced by many parameters, such as the mass of the sample, the heating rate, the atmosphere in which the measurement takes place, and the shape of the crucible in which the sample is placed. In this paper, the influence of these parameters on the calibration curves was investigated. We have focused on oak wood. The best parameters result in a calibration curve with the largest correlation coefficient R2 and the highest slope of the line k. On this basis, we can determine the mass loss during thermal modification of unknown samples of the same wood species under the same measurement conditions.

Laser marking on polymer composite surfaces can be difficult to contrast and cause readability problems for electronic decoding equipment on production lines due to poor interaction between the laser and the fibres used to reinforce these materials. This problem can be solved with the right choice of marking parameters, resulting in savings for companies by avoiding production problems such as rejection, scrap and customer complaints. The present work uses the PBT/glass fibre composite used in the manufacture of instrument panels for motorcycles. The tests were carried out with different laser marking parameters using a Nd: YAG laser. Subsequently, the laser-marked DMC codes were analysed using a Verifier to evaluate the quality according to the ISO/IEC 29158:2020 standard. A detailed analysis of these surfaces was also carried out to observe some physical and chemical changes using SEM microscopy and EDS spectroscopy. The optical analysis showed that the lower the radiation power and pulse frequency and the higher the marking speed, the weaker the laser marking and therefore the poorer the DMC code quality, which was confirmed by the SEM. EDS spectroscopy showed that the laser marking process did not affect the chemical changes on the sample surface.

As wind turbine power requirements have evolved from the order of kilowatts (kW) to the order of several megawatts (MW), wind turbine components have been subjected to more demanding and critical operating conditions. The wind turbine must cope with higher wind loads due to larger blade sizes, which are also time-varying and ultimately higher power levels. One of the challenges in the manufacture of high-power wind turbines lies in the gearbox and consists of achieving ever greater power density without compromising efficiency, i.e., greater load capacity with lower weight (and production cost) and reduced power losses. In this paper we will analyze the influence that certain design parameters have on the size and weight of the gearbox components and therefore of the gearbox itself. For this purpose, the theoretical model of the gearbox will be planned and the influence of calculation parameters on the gearbox design will be analyzed. The influence of material, modulus and tooth width on the size and weight of the gearbox will be observed. Critical stresses are also calculated. The goal is to prepare the theoretical basis for an optimization process that will result in a gearbox as compact as possible without compromising the service life of the components.

The efficacy of weed management depends on the correct control timing according to the seedling emergence dynamics. Since soil temperature and soil moisture are two main factors that determine weed germination, the hydrothermal time model can be used to predict their emergence. The aim of this study was to estimate the base temperature (Tb) and base water potential (Ψb) for germination of Chenopodium album, Amaranthus retroflexus, Setaria pumila and Panicum capillare collected from fields in continental Croatia and then to compare these values with those of Italian populations embedded in the AlertInf model. Germination tests were performed at seven constant temperatures (ranging from 4 to 27°C) and eight water potentials (0.00 to - 1.00 MPa). Estimated Tb and Ψb were 3.4°C, -1.38 MPa for C. album, 13.9°C, -0.36 MPa for A. retroflexus, 6.6°C, -0.71 MPa for S. pumila and 11.0°C, -0.87 MPa for P. capillare, respectively. According to the criterion of overlap of the 95% confidence intervals, only Tb of C. album, and Ψb of A. retroflexus were similar between Croatian and Italian populations. Further field experiments should be conducted in the Croatian field to monitor weed emergence patterns of C. album and to calibrate the AlerInf equation parameters.

The main aim of this study is to investigate the optimization of the technological process for selective laser melting (SLM) additive manufacturing. The group of process parameters considered was selected from the first-stage parameters identified in preliminary research. Samples manufactured using three different sets of parameter values were subjected to static tensile and compression tests. The samples were also subjected to dynamic Split–Hopkinson tests. To verify the microstructural changes after the dynamic tests, microstructural analyses were conducted. Additionally, the element deformation during the tensile tests was analyzed using digital image correlation (DIC). To analyze the influence of the selected parameters and verify the layered structure of the manufactured elements, sclerometer scratch hardness tests were carried out on each sample. Basing on the research results it was possible to observe the porosity growth mechanism and its influence on the material strength (including static and dynamic tests). Parameters modifications that caused 20% lower energy density, elongation of the elements during tensile testing decreased twice, which was strictly connected with porosity growth. An increase of energy density by almost three times caused a significant reduction of force fluctuations differences between both tested surfaces (parallel and perpendicular to the building platform) during sclerometer hardness testing. That kind of phenomenon had been taken into account in the microstructure investigations before and after dynamic testing where it had been spotted a positive impact on material deformations based on fused material grains formation after SLM processing.

Total Hip Arthroplasty (THA) is a common surgical procedure used to treat hip osteoar-thritis and other joint conditions that cause pain and functional limitation. Traditionally, THA has been most performed in elderly patients, but in recent years there has been an in-crease in hip arthroplasties in young patients. Femoral prosthesis rupture is a rare but sig-nificant complication that can also occur in young patients undergoing total hip arthro-plasty (THA). Some of the factors that can contribute to femoral prosthesis ruptures include abnormal overload, defects in the design lack of geometric fit, type of materials used in the stem and femoral head connection. The aim of this study is to analyze the criticalities in the contact between the femoral head and the stem neck. In particular, the two types of con-tacts will be taken into consideration: proximal and distal and through the finite element method (FEA) the criticalities will be defined. The results show that in the proximal contact the voltages are higher than 500 Mpa. This is due to the fact that there are higher circum-ferential voltages. In addition, to prevent bacterial infiltration or debris from the outside, the distal connection is the recommended one.

A marine fibrinolytic compound FGFC1 enhancing fibrinolysis was obtained involving in enzymatic kinetic parameters of reciprocal activation system with single chain urokinase type plasminogen activator and plasminogen. FGFC1, a kind of bisindole alkaloid from a metabolite of rare marine fungi Starchbotrys longispora FG216, modulated enzymatic kinetic parameters including fibrinolytic reaction rate and fibrin degradation characteristics. The enzymatic kinetics of fibrinolysis was described based on enzymatic reaction of chromogenic-substrate associated with p-nitroaniline (p-NA). While single chain urokinase-type plasminogen activator (pro-uPA) actived plasminogen, K_cat and k_cat/k_m increased significantly with increase of FGFC1 concentration. Moreover, K_cat and k_cat/k_m exhibited 26.5-fold and 22.8-fold enhanced activity at the concentration of 40 μg•mL⁻¹ of FGFC1, respectively. The results suggested that FGFC1 improved significantly the maximum catalytic efficiency and the total catalytic activity of fibrinolysis base on the reciprocal activation of pro-uPA and plasminogen. K_m increased with increasing FGFC1 concentration, which indicated that FGFC1 decreased slightly the affinity activity of pro-uPA and plasminogen versus enzyme substrate. The marine bisindole alkaloid FGFC1 enhanced fibrinolysis which was taken on enzymatic kinetic characteristics.

This work continues the review and illustrative application to energy systems of the “Fourth-Order Best-Estimate Results with Reduced Uncertainties Predictive Modeling” (4th-BERRU-PM) methodology. The 4th-BERRU-PM methodology uses the Maximum Entropy (MaxEnt) principle to incorporate fourth-order experimental and computational information, in-cluding fourth (and higher) order sensitivities of computed model responses with respect to model parameters. The 4th-BERRU-PM methodology yields the fourth-order MaxEnt posterior distribution of experimentally measured and computed model responses and parameters, in the combined phase-space of model responses and parameters. The 4th-BERRU-PM methodology encompasses fourth-order sensitivity analysis (SA) and uncertainty quantification (UQ), which were reviewed in the accompanying work (Part 1), as well as fourth-order data assimilation (DA) and model calibration (MC) capabilities, which will be reviewed and illustrated in this work (Part 2). The applicability of the 4th-BERRU-PM methodology to energy systems is illustrated by using the Polyethylene-Reflected Plutonium (acronym: PERP) OECD/NEA reactor physics benchmark, which is modeled using the linear neutron transport Boltzmann equation, involving 21976 im-precisely known parameters. This benchmark is representative of “large-scale computations” such as those involved in the modeling of energy systems. The result (“response”) of interest for the PERP benchmark is the leakage of neutrons through the outer surface of this spherical benchmark, which can be computed numerically and measured experimentally. The impact of the high-order sensitivities of the response with respect to the PERP model parameters is quantified for “high-precision” parameters (2% standard deviations) and “medium-precision” parameters (5% standard deviations). Analyzing the best-estimate results with reduced uncertainties for the 1st- through 4th-order moments (mean values, covariance, skewness, and kurtosis) produced by the 4th-BERRU-PM methodology for the PERP benchmark indicates that, even for systems mod-eled by linear equations (e.g., the PERP benchmark), retaining only first-order sensitivities is insufficient for reliable predictive modeling (including SA, UQ, DA, MC). At least second-order sensitivities should be retained in order to obtain reliable predictions.

We present a finite element model updating technique for soil-structure system identification of the Millikan Library building using the seismic data recorded during the 2002 Yorba Linda earthquake. A detailed finite element (FE) model of the Millikan Library building is developed in OpenSees and updated using a sequential Bayesian estimation approach for joint parameter and input identification. A two-step system identification approach is devised. First, the fixed-base structural model is updated to estimate the structural model parameters (including effective elastic modulus of structural components, distributed floor mass, and Rayleigh damping parameters) and some uncertain components of the foundation-level motion. Then, the identified structural model is used for soil-structure model updating wherein the Rayleigh damping parameters, the stiffness and viscosity of the soil subsystem (modeled using a substructure approach), and the foundation input motions (FIMs) are estimated. The identified model parameters are compared with state-of-practice recommendations. While a specific application is made for the Millikan Library, the present work offers a framework for integrating large-scale FE models with measurement data for model inversion. By utilizing this framework for different civil structures and earthquake records, key structural model parameters can be estimated from the real-world recorded data, which can subsequently be used for assessing and improving, as necessary, state-of-the-art seismic analysis and structural modeling techniques. This paper presents an effort towards using real-world measurements for large-scale FE model updating in the soil and structure, uniform soil time domain for joint parameter and input estimation, and thus paves the way for future applications in system identification, health monitoring and diagnosis of civil structures.

The article analyzes the problems connected with ensuring the coordinated operation of slipway drives that arise during the launch of a ship. The dynamic model of load of the electric drive of the ship's cart is obtained taking into account the peculiarities of the construction of the ship-lifting complex, which allows to analyze the influence of external factors and random influences during the entire process of launching the ship. A linearized mathematical model of the dynamics of a complex vessel movement in the process of descent in the space of states is developed, which allows to identify the mode of operation of the multi-drive system, taking into account its structure. The analysis of efficiency of application of recurrent methods of identification (stochastic approximation and least squares) of the parameters of the linearized model in the space of states is carried out. A decision support system has been developed in the automated system of operational control by the module for estimating the situation and the control synthesis to ensure a coherent motion of a complex ship-carts object in a two-phase environment.

Most of α-thalassemia cases are caused by deletions of the structural α-globin genes. The degree of microcytosis and hypochromia has been correlated with the number of affected α-globin genes, suggesting a promising role of hematologic parameters as predictive diagnostic tools. However, specific cut-off points for these parameters to discriminate between the different subtypes of α-thalassemia remain to be clearly defined. Six hematologic parameters (total number of erythrocytes, hemoglobin concentration, mean corpuscular volume, mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration and red cell distribution width) were evaluated in 174 cases of deletional α-thalassemia (92 heterozygous α+ thalassemia, 39 homozygous α+ thalassemia, 34 heterozygous α0 thalassemia and 9 cases of Hb H disease). A good correlation between the number of deleted alpha genes and MCV (r = -0.672, p<0.001), MCH (r = -0.788, p<0.001) and RDW (r = 0.633, p<0.001) was observed. The deletion of at least two alpha genes in adult individuals with microcytosis without iron deficiency and normal values of Hb A2 and Hb F should be discarded when MCH levels are lower than 23.15 pg. Furthermore, MCH <21.90 pg and/or MCV <70.80 fL are strongly suggestive of the presence of one α0 allele. Finally, an accurate presumptive diagnosis of Hb H disease can be made if both RDW ≥20% and MCH <18.45 pg are seen.

Preterm infants are at significant risk to develop reduced bone mineralization based on inadequate supply of calcium and phosphorus (Ca-P). Biochemical parameters can be used to evaluate the nutritional intake. The direct effect of nutritional intake on changes in biochemical parameters has not been studied. Our objective was to evaluate the effect of Ca-P supplementation on biochemical markers as serum (s)/urinary (u) Ca and P; alkaline phosphatase (ALP); tubular reabsorption of P (TrP) and urinary ratios for Ca/creatinin and P/creatinin in Very-Low-Birth-Weight infants on postnatal day 1, 3, 5, 7, 10, and 14. This observational study compared two groups with High (n = 30) and Low (n = 40) intake of Ca-P. Birth weight: median (IRQ) 948 (772-1225) vs. 939 (776-1163) grams; Gestational age: 28.2 (26.5-29.6) vs. 27.8 (26.1-29.4) weeks. Daily median concentrations of biochemical parameter were not different between the groups but linear regression mixed model analyses showed that Ca intake increased the uCa and TrP (p = 0.04) and decreased ALP (p = 0.00). Phosphorus intake increased sP, uP and uP/creat ratio and ALP (p ≤ 0.02) and caused decrease in TrP (p = 0.00). Protein intake decreased sP (p = 0.000), while low gestational age and male gender increased renal excretion of P (p < 0.03). Standardized repeated measurements showed that biochemical parameters were affected by nutritional intake, gestational age and gender.

Because the application of antibiotic growth promoters (AGP) causes accelerated adverse effects on the animal diet, the scientific community has taken progressive steps to enhance sustainable animal productivity without using AGP in animal nutrition. Organic acids (OAs) are non-antibiotic feed additives and a promising feeding strategy in the swine and broiler industry. Mechanistically, OAs improve productivity through multiple and diverse pathways: (a) reduction of pathogenic bacteria in the gastrointestinal tract (GIT) by reducing the gut pH; (b) boosting the digestibility of nutrients by facilitating digestive enzyme secretion and increasing feed retention time in the gut system; (c) having a positive impact and preventing meat quality deterioration without leaving any chemical residues. Recent studies have reported the effectiveness of using encapsulated OAs and synergistic mechanisms of OAs combinations in swine and broiler productivity. On the other hand, the synergistic mechanisms of OAs and the optimal combination of OAs in the animal diet are not completely understood, and further intensive scientific explorations are needed. Moreover, the ultimate production parameters are not similar owing to the type of OAs, concentration level, growth phase, health status of animals, hygienic standards, and environmental factors. Thus, those factors need to be considered before implementing OAs in feeding practices. In conclusion, the current review evaluated the basics of OAs, mode of action, novel strategies to enhance utilization, influence on growth performances, nutrient digestibility, quality traits, and meat preservation of swine and broilers and their potential concerns regarding utilization.

Diagnosis of encephalitis is a challenging problem due to the heterogeneity of clinical presentations and the myriad of aetiology. The objective was to determine the aetiology, clinical features, laboratory parameters, radiological findings and in-hospital outcome of acute encephalitis syndrome (AES) cases in Myanmar. Methods: A prospective analytic study was conducted at Neuromedical Ward of Yangon General Hospital during March to August 2023. 81 AES cases were enrolled and cerebrospinal fluids (CSF) samples were collected. Qiastat ME Panelwas used to detect viral, bacterial and fungal pathogens. Results: 17 out of 81 (21%) cases were non-encephalitis with alternative definite diagnosis. Among the remaining 64 encephalitis cases, the exact infectious and immune aetiologies were identified in 31/64 (48.4%); 26/31 cases (83.9%) were infectious causes and 5/31 patients (16.1%) were immune encephalitis. Among the infection causes, six Herpes Simplex Virus-1, one bacteriologically confirmed and seven probable Mycobacterium tuberculosis, three Haemophilus influenzae, two Streptococcus pneumoniae, one Streptococcus pyogenes, one Varicella-Zoster Virus (Ramsay Hunt Syndrome with meningoencephalitis), two Cryptococcus neoformans infected patients and rare causes such as Listeria monocytogenes, Burkholdelria cepacia, Sphingomonas paucimobilis and Aspergillus were identified. One case was dual infection with Haemophilus influenzae and Cryptococcus neformans. Abnormal protein levels and CSF pleocytosis were significantly higher among bacterial causes (P<0.05). 6.45% (2/31) of encephalitis patients with identified causes and 12.12% (4/33) of those without organism identified had bad outcome. Conclusions: Herpes encephalitis and tuberculous meningoencepalitis were the commonest. This study highlighted that molecular testing with multidisciplinary approach is required to ensure the right treatment on time.

While considering the sensitivity over the parameter optimization, it is essential to determine which parameters have the most significant implications on model performance. This study focuses on the baseflow recession constant as one of the independent basin parameters to forecast low flows, perform hydrograph analysis, and calibrate rainfall-runoff models for significant improvement. Prior studies examined that the optimization of data adjustment parameters can improve the hydrological model performance and determine the minimum acceptable data length for data scarce regions using the Xinanjaing model. However, it is essential to pay special attention to the sensitivity of the recession constant, which can also impact the model performance during the data scarcity. Therefore, this study extends the research to comprehend the recession constant sensitivity over data adjustment parameters in the shorter datasets leading to more reliable parameter estimation. In terms of that, this study explores how recession constant affects hydrological parameter estimation on annual scale while keeping data adjustment parameters constant in continuous hydrological modeling, employing the Xinanjiang (XAJ) model as a case study. This study considered two approaches of recession constant (cg); (i) assessing the relationship between cg and the data adjustment parameter (Cep), for the 28-year datasets, (ii) investigating the significant impacts of the sensitivity of cg over Cep in shorter datasets which can affect the estimation of the acceptable minimum data length in the data scarce basins. The study underscores the importance of the recession constant sensitivity for reliable continuous hydrological model predictions, especially in data-scared areas. The study’s outcomes enhance the understanding of the importance of parameter sensitivity and its relationship in conceptual hydrological modeling during the data limitations.

Background: Spine shape parameters, such as leg length, kyphotic or lordotic angle, are influenced by low back pain. There is also evidence that the thoracolumbar fascia plays a role in such pa-thologies. This study examined the immediate effects of a myofascial release technique (MFR) on the thoracolumbar fascia and of an osteopathic treatment (OMT) on postural parameters in pa-tients with acute low back pain (aLBP). Methods: This study was a single-blind randomized pla-cebo-controlled trial. Seventy-one subjects (43.8 ± 10.5 years) suffering from aLBP were randomly and blinded assigned to three groups to be treated with MFR, OMT or a placebo intervention. Spinal shape parameters (functional leg length discrepancy (fLLD), kyphotic angle, lordotic an-gle) were measured before and after the intervention using video raster stereography. Results: Within the MFR group, fLLD reduced by 5.2 mm, p < 0.001 and kyphotic angle by 8.2 degrees, p < 0.001. Within the OMT group, fLLD reduced by 4.5 mm, p < 0.001 and kyphotic angle by 8.4 °, p = 0.007. Conclusion: MFR and OMT have an influence on fLLD and the kyphotic angle in aLBP patients. The interventions could have a regulating effect on the impaired neuromotor control of the lumbar muscles.

To our best knowledge this is the first study to assess and compare lower limb biomechanics and gait pattern between patients undergoing total knee arthroplasty with use of fixed-bearing medial-pivot and multi-radius design implants. Results of this study show that there were no statistical differences between both types of implants and even though there was significant improvement in patient-reported outcome and gait pattern, those parameters still differ significantly in comparison to healthy volunteers. The problem with dissatisfaction after operative treatment may not lay in the procedure itself, but many different factors may contribute to it. Next studies comparing other designs of implants, as well as proper rehabilitation protocol should be performed

Shape memory alloys (SMAs) are increasingly used in the fields of aviation, automotive and biomedicine due to their unique properties. Nickel-Titanium (NiTi) alloy materials, which are one of the shape memory alloys, are among the most frequently used alloy materials. The shape memory and super elastic effects of NiTi alloys, high ductility and deformation hardening make it difficult to shape burr. An additional problem is the formation of a white layer during machining. In this study, surface milling operations were performed in dry cutting conditions with uncoated cutting tools with different nose radii. The processing parameters were determined based on the experience gained as a result of the preliminary tests. Tungsten carbide cutting tools with different nose radii (0.4mm and 0.8mm) were used for the milling operations. Milling was carried out at three different cutting speeds (20, 35, 50 m/min), feed rates (0.03, 0.07, 0.14 mm/tooth), and a constant axial cutting depth (0.7 mm). As a result of our experimental studies, the best tool life was found to be in 0.8 mm nose radius cutting tools at 20 m/min cutting speed and 0.03 mm/tooth feed rate (0.264 mm). The minimum average surface roughness was found after milling with 0.8 mm nose radius cutting tool at 20 m/min cutting speed and 0.03 mm/tooth feed rate (0.346 μm). It has been determined that increasing the cutting tool nose radius reduces both the flank wear over the cutting tool and the average surface roughness.

There is a huge need to search for new treatment options and potential biomarkers of therapeutic response to antidepressant treatment. Depression and metabolic syndrome often coexist while pathophysiological overlap, including microbiota changes, may play a role. The aim of the study is to assess the effect of probiotic supplementation on symptoms of depression, anxiety and stress, metabolic parameters, inflammation and oxidative stress markers, and faecal microbiota in adult patients with depressive disorders depending on the co-occurance of MetS. The trial will be a four-arm, parallel group, prospective, randomized, double-blind, controlled design that will include 200 participants and will last 20 weeks. The probiotic preparation will contain Lactobacillus helveticus Rosell®-52, Bifidobacterium longum Rosell®-175. We will assess the level of depression, anxiety and stress, quality of life, blood pressure, body mass index and waist circumference, white blood cells count, serum levels of C-reactive protein, HDL cholesterol, triglicerides, fasting glucose, faecal microbiota composition and the level of some faecal microbiota metabolites, as well as inflammation markers and oxidative stress parameters in serum. The trial may establish a safe and easy-to-use treatment option as an adjunct in a subpopulation of depressive patients only partially responsive to pharmacologic treatment. (ClinicalTrials.gov identifier: ).

The objective of this study is to investigate how different therapies modulating insulin resistance, either causally or consequently, affect metabolic parameters in treatment-naive subjects with T2DM. A total of 212 subjects were assigned to receive either a tight Japanese diet (n=65), pioglitazone at doses ranging from 15-30 mg/day (n=70), or canagliflozin at doses ranging from 50-100 mg/day (n=77) for a duration of three months. Correlations and changes (Δ) in metabolic parameters relative to insulin resistance were investigated. Across these distinct therapeutic interventions, ΔHOMA-R exhibited significant correlations with ΔFBG and ΔHOMA-B, while demonstrating a negative correlation with baseline HOMA-R. However, other parameters such as ΔHbA1c, ΔBMI, ΔTC, ΔTG, Δnon-HDL-C, or ΔUA displayed varying patterns depending on the treatment regimens. Participants were stratified into two groups based on the median value of ΔHOMA-R: the lower half (X) and upper half (Y). Group X consistently demonstrated more pronounced reductions in FBG compared to Group Y across all treatments, while other parameters including HbA1c, HOMA-B, TC, TG, HDL-C, non-HDL-C, TG/HDL-C ratio, or UA exhibited distinct regulatory responses depending on the treatment administered These findings suggest that 1) regression to the mean is observed in the changes of insulin resistance across these therapies. 2) modulation of insulin resistance with these therapies, either causally or consequentially, results in differential effects on glycemic parameters, beta-cell function, specific lipids, body weight or UA.

Water is one of the most critical factors affecting environmental health. For this reason, estimating and monitoring the behavior of water in nature and preventing water pollution before it occurs are advantageous to avoid problems that may occur in terms of environmental health. In order to predict the behavior of water, the hydrological cycle needs to be evaluated on a basin basis. At this point, hydrological models can be used to make mathematical representations of hydrologi-cal processes. These models play an essential role in predicting and monitoring problems such as poor water quality, pollution, particle and sediment transport, and proliferation of oil and petro-leum derivatives among frequently encountered issues in environmental health. In this study, a 2D surface water model was created using soil and water assessment tool (SWAT) to simulate the lotic ecosystem and existing water quality in Tatlıçay Basin and to propose solutions for im-proving environmental health in Cankiri provincial center in Türkiye. The accuracy of the input data and the validity of the model were checked with the calibration and validation studies by using the monthly or 3-monthly observation data of the General Directorate of State Hydraulic Works’ flow observation & water quality stations from 2016 to 2020. The aim was to provide the opportunity to produce fast, accurate, and practical solutions in the face of negative scenarios with this model. This modelling study obtained successful results in the calibration and valida-tion process with very few observed data. With this study, a significant contribution to the litera-ture on environmental health is made, as there aren't many examples of hydrological modeling from the Middle East.