This study focuses on the increased risk of high heat release and asphyxiation (toxic gas poisoning) in the event of a fire of polyurethane (PU) and MDF-based building materials, which are commonly used in building fires. Among them, polyurethane (PU) building materials are essential for buildings except in Europe and some other countries due to their excellent thermal insulation performance, but problems of short-term heat release and spread of toxic gases in the event of a fire continue to occur. To overcome these problems, researchers are actively working on introducing various flame retardants into building materials. Therefore, in this study, we produced a laboratory-sized (500mm*500mm) plate flame retardant board that can be utilized as a building material with a lower heat release rate and a lower toxicity index by mixing expanded graphite and ceramic binder as flame retardants in a main material based on the cellulose of waste paper by replacing the existing building materials with a hot-press method. According to the ISO-5660-1 test on the heat release rate of the plate flame retardant board, the THR value was 2.9 (MJ/m2) for 10 minutes, showing an effect of reducing the THR value by 36.3 (MJ/m2) compared to the THR value of 39.2 (MJ/m2) of the specimen made using only paper. In addition, the toxicity index of the flame retardant board was checked through the NES 713 test. As a result, the test specimen showed a toxicity index of 0.7, which is 2.4 lower than the toxicity index of 3.1 of MDF, which is utilized as a conventional building material. Based on the results of this study, the cellulose fire retardant board showed the effect of reducing the heat release rate and toxicity index of building materials in a building fire, which reduces the risk of rapid heat spread and smoke toxicity. This has the potential to improve the evacuation time (A-SET) of evacuees in fires. It is also important to show that recycling waste paper and utilizing it as the main material for building materials can be an alternative in terms of sustainable development.

In this study, we examine the possibility of proactive floodwater diversion to fields via backwater in numerical experiments using multiple elevation data products with different spatial resolutions and explore the optimal timing of water diversion from the perspective of crop calendars. First, a comparison of the elevation data products revealed that photogrammetric data can capture microtopography, such as the footpaths between rice paddies and drainage channels around a field. Numerical experiments using two elevation data products, 5mDEM and LP-derived approximately 5mDEM, revealed that floodwater diversion can reduce the peak to about 19.2 m3/s when using the 5mDEM and can reduce the peak to 16.0 m3/s when using the LP-derived approximately 5mDEM. Interviews with land improvement districts and a review of previous studies revealed that the ear-burst period is particularly vulnerable to flooding. Although the effect of flood peak reduction is reduced due to flooding of the field, it is possible that floodwater can be channeled during the ripening period in August and in late September and October when the ears have been harvested.

The use of plastic in agriculture has become so omnipresent within the industry that it has acquired it own lexicon to become known as ‘plasticulture’. However, since, compared to other industries the quantities consumed are low, little attention is granted to this waste stream. This is the case both with local and international policies even though it bears a close connection to soil health and therefore is a prerequisite to improve the sustainability of food production processes including food security. Using Malta as a case study, the research utilises quantitative and qualitative tools to identify and quantify the most common types of agricultural plastic waste generated and determines the attitudes of farmers towards a collection and recycling scheme. While it identifies that incineration and ploughing of plastic waste as regular practices, it also ascertains the willingness of farmers to acquire more knowledge about more appropriate methods to dispose of this waste stream thus guiding policy makers towards the need to initiate educational measures for farmers to prevent these harmful practices. Through stakeholder interviews the research highlights that the present lack of data is a major hindrance for policy to take account of this waste stream.

The protection of first responders from radioactive contamination that may result from a radiological accident is of great importance and complexity. The complexity of detecting and quantifying such radioactive contamination is very high when it comes to the dispersion of alpha-emitting radionuclides in the environment. This work presents the development of an un-manned aerial monitoring system that integrates an unmanned aircraft system (UAS) and a novel optical alpha radioluminescence detection system to scan and obtain information about the alpha-emitting radionuclides contaminated area on a 3D map. This manuscript describes a flexible hardware and software architecture for optical detection of alpha-emitting sources. The UAS is equipped with 4G/LTE air-ground communications and onboard computation to geolocate and send to the ground control station (GCS) the measured data in real-time and thus react to any anomaly detected during the mission. A GCS has also been developed for the correct visualization of the radioactive samples in a 3D map. This article shows the results obtained from the calibration of the detector in the laboratory as well as from the different flights performed on UV LEDs and a 100 MBq 241Am source to demonstrate the feasibility of the system in a realistic scenario.

Currently, most plastic waste stems from packaging materials, with a large proportion of this waste either discarded or used to derive fuel. Accordingly, there is growing interest in the use of pyrolysis in the context of chemically recycling non-recyclable (i.e., via mechanical means) plastic waste into petrochemical feedstock. The aim of this study is to use kinetic analyses to elucidate the pyrolytic properties of solid recovered fuel (SRF) produced using two types of reactors, namely, fixed bed and fluidized bed reactors. From the kinetic analysis, the activation energy corresponding to the rate of pyrolysis reaction conversion was obtained. In conclusion, we found that the pyrolysis occurs more vigorously in fluidized bed reactors compared to fixed bed reactors.

Based upon a radically new approach, this paper describes a 2-box absolute flow model that calculates the CO₂ transfer between the atmosphere and a terrestrial / ocean mixing reservoir. Given the inputs of anthropogenic fossil fuel emissions (CO2ff), atmospheric CO₂ mixing-ratio and nuclear weapons bomb yields, the model calculates atmospheric d¹³C and Δ¹⁴C time-series, with the level of agreement for d¹³C being to within ± 0.05 ‰, for Δ¹⁴C to within ± 3‰, spanning 200 years. The model contains only seven internal parameters which are varied to optimize the fit. Yet according to conventional wisdom, this model should not work. It is commonly held that the ¹³C and ¹⁴C isotopic forms of carbon bypass seawater carbonate chemistry, resulting in very different absorption properties (Revelle factor) as compared to ¹²C. This study rejects this assumption, and uses the same residence time and reservoir mixing properties for all isotopes. The paper includes an analysis justifying why the isotopic bypass of the Revelle factor is not significant. The study describes the use of the model to track CO2ff takeup using two separate measures, a) the amount of molecular CO2ff remaining in the atmosphere and b) the amount of atmospheric growth attributable to CO2ff, thereby resolving discrepancies in published values.

Carbon footprint mitigation actions have become a key issue for companies involved in urban freight transport. The electrification of the delivery fleets is one of the crucial sustainable actions carried out. To this end, it is necessary to explore several fleet renewal strategies over a finite planning horizon evaluating different types of electric powertrains for light commercial vehicles. The primary goal of this purpose-built analysis is to assist and boost the fleet managers' decisions when transitioning to alternative-fuelled vans, intending to maximize cost savings and reduce greenhouse gas emissions inventory. The model presented in this work is a Multi-Objective Linear Programming hybrid analysis taking into account the vehicle and energy supply infrastructure costs and the emissions reported in each inventory scope following the Greenhouse Gas Protocol sustainability guidelines. From this perspective, the conducted research offers a novel approximation to fleet management problems enabling a break-down cost analysis and an evaluation of the annual emissions company report. The comprehensive numerical simulations carried out over different study scenarios in Spain demonstrate that the optimization approach does not only show effective fleet renewal strategies but also identifies critical factors that impact the fleet's competitiveness, offering valuable insights for fleet managers and policymakers to meet carbon footprint reductions in a cost-effectively way.

TThe following three objectives were tested in this study: (1) investigate the utility of low-altitude remote sensing using UAS technology to compare the effects of different N application systems in rice production; (2) use spatial extrapolation to scale up plot-level generated to farmer field rice yield data based on crop spectral signatures, and (3) predict and map out rice productivity as a function of N placement systems. Images were captured on a UAV platform at midseason of the rice crop. Orthomosaics were developed for selected fields in rice-producing zones. Grain yields were assessed from low, medium, and high crop health plots delineated based on NDVI values. On the plot scale, UDP outyielded non-UDP by 0.84%. Individual plot yield data were scaled up to the farmer field level through Jenks natural breaks classification and es-tablishing an empirical relationship between OSAVI and plot yields. Assessment of the scaled-up field levelfield-level data also confirmed the superiority of UDP N man-agement over the non-UDP systems in promoting rice yields. Scaling up plot scale da-ta to whole field levels also facilitated generating and mapping expected yield maps for individual farmer fields in the three zones studied. This study has established a tangible simple but tangible protocol protocol for predicting and mapping rice yields in small-scale farmer fields using UAS data.

Understanding surface water evaporation in tropical catchments is pivotal for effective water management, but limited research exists on stable isotopic (δ2H and δ18O) assessment of water evaporation losses. Our study bridges that gap, examining stable isotopes in meteoric water and surface waters across tropical regions, both humid and semi-arid. Using the Craig-Gordon model, we calibrated evaporation-to-inflow (E/I) ratios, identifying distinct E/I variations between seasons and regions. Notably, the semi-arid region consistently exhibited higher E/I ratios due to climatic characteristics. By integrating the Hamiltonian Monte Carlo and the No-U-Turn Sampler, we were able to quantify uncertainties in isotopic and meteorological parameters, resulting in E/I estimates within 68% and 95% confidence intervals. Our Bayesian model insights are critical for freshwater resource optimization and hydrological modeling in tropical regions.

Flood records of the Kunmalik River in Chinese Tien Shan mountains have showed that glacier- dammed lake outburst floods (GLOF) had occurred almost every year since 1956 from the glaci-er-dammed Lake Merzbacher. However, GLOF in cold season is seldomly studied. The defense and management of the flood need further observation and study. The maximum peak discharge of 825 m3/s occurred on 5th December 1996 with the maximum flood volume of 2.875×108 m3, which was 18 times larger than that of the mean daily discharge in winter over the past six decades. The drainage of the Merzbacher lake is not a mechanical breaking up of the glacier dam, but the release of pressurized water along a subglacial tunnel triggered by quickly surge of the Northern Glacier, the subglacial tunnels are enlarged by both ice melting and frictional heat in the flooding water and heat under the glaciated dam and the lake in winter. There is no correlation between the GLOF size and air temperature of cold season. The floods in cold season have become bigger since 1996 than that before, and the flood duration has been extended from winter to spring. Once the cold GLOF starts, its discharge can be forecasted day by day to extrapolate the monitoring hydrograph as a linear curve.

Agricultural drainage canals that connect upstream fish spawning areas to downstream rivers and lakes serve as crucial habitats for migrating fish. However, disconnections, such as drops and chutes, have been constructed in these canals due to agricultural modernization and flood control measures, hindering the movement of fish with limited swimming abilities. Portable fishways offer a promising solution to reconnect water bodies in agricultural canals, as they can be easily removed during high water discharges to avoid impeding the canals' drainage function. In addition to experimental assessments of fishway functionality, employing a hydrodynamic model to explore effective placement strategies for portable fishways is essential to maximize their effectiveness. This study presents a method to determine the best horizontal location of a portable fishway in an agricultural drainage canal using two-dimensional hydrodynamic simulations within the specified cases. The applicability of this method is demonstrated by addressing the positioning challenge of a portable fishway on a chute in an agricultural drainage canal in Japan. Results indicate that the proposed method allows for the selection of a suitable location, considering preferable hydraulic conditions both within the portable fishway and around its entrance.

Air pollution is a global issue, and the transportation sector is recognized as the third-largest contributor to anthropogenic greenhouse gas emissions. Vehicles emit a range of chemical compounds as a direct result of the combustion process. The nature and quantity of these emissions depend on the vehicle's characteristics, road, and local weather conditions. As a result, these emissions require special attention due to the adverse effects contributing to global warming and significantly impacting human health. In this regard, diagnosing and monitoring air quality is crucial for understanding the nature and quantity of emissions generated by various sources. However, in developing countries, the necessary inputs, and data for conducting such analyses are not always available. Therefore, the purpose of this study is to estimate emissions specifically generated from road operations. To achieve this, HDM-4 calculation tool is utilized to quantitatively estimate these emissions. This tool was applied in Baja California, Mexico, on the Centinela-La Rumorosa highway. The results obtained show that annually, 372.5 tons of pollutant emissions are generated, composed of HC, CO, CO2, NOx, Par, SO2, and PB, covering a mere 128 kilometers of length within a state road network spanning 11,429 kilometers. This highlights the necessity of implementing strategies to reduce emissions or the environmental impact generated by vehicular operations on roads in developing countries.

A very important role in determining the quality of water is the assessment of its microbiological quality. Water quality control, which could pose a direct threat to human health and life, is performed in the case of water produced at the water treatment plants, tap water or water in swimming pools. However, these traditional methods used to assess its quality are laborious and time consuming. In emergency and incidental situations, in the era of terrorist threats, the need for quick, reliable and reproducible microbiological determinations seems to be essential. In this study, an attempt was made to compare various methods of assessing the microbiological quality of water. The assessment was carried out for waters with different microbiological characteristics: surface waters, rainwater, groundwater, and water supply. The evaluation was carried out using traditional culture methods and high-speed methods: flow cytometry and luminometry. The analysis of microbiological parameters were the basis for the statistical analysis. The conducted microbiological analysis of various types of water, along with their statistical evaluation, showed different dependencies for each of the analysed waters.

Cambodia faces the challenge of managing excess water during the wet season and insufficient water during the dry season. This harms human life and endangers aquatic and natural resources, agricultural practices, and food security. In order to ensure the well-being of both people and food security, water governance is crucial. However, Cambodia's water governance is hindered by various obstacles, including sectoral and centralized influences, top-down and large-scale strategies, a lack of coordination among relevant agencies, and limited involvement of local communities. This study delves into water governance across different sectors, from centralized to community-based natural resources management to tackle these challenges. Through analyzing literature and case studies of farmer water user communities (FWUC), community fisheries (CFis), and community fish refuges (CFRs) in three Mekong Delta provinces in Cambodia, the study concludes that although water governance has improved, it has resulted in a decline in fishery resources from rivers and water bodies and an increase in water conflicts among farmers and sectors in the face of climate change. To enhance water governance in Cambodia, it is critical to integrate it at the district level. This will promote sustainable water use and management across the country and pave the way for a brighter future.

In the last years, new numerical methods have been applied to weather data for water budget es-timation. Geostatistics is one of the most powerful approaches, when it comes to studying spatially relevant natural phenomena, as it takes into account the spatial correlation among measurements over a specific study area and increases the reliability of the estimation by providing the associate uncertainty. In this study, we tested the feasibility of using a geostatistical method called Ordinary Kriging to provide a reliable estimation of the water budget of the Foro river basin (Periadriatic area, Central Italy), by comparing the obtained results with a more traditional yet robust approach based on the Thiessen polygon spatialization method, considered here as a reference. The spatial estimation with the selected geostatistical and traditional approaches was performed on the av-erage monthly rainfall and temperatures derived from 33-year-long time series measured at the weather station of the regional monitoring network. To transform the spatial variables quantities of both rainfall and air temperature into actual runoff estimates that ideally represent the river dis-charge, we used both the Turc and Thornthwaite methods, considering variable Potential Infiltra-tion Coefficients according to the hydrogeological complexes’ distribution. For the geostatistical method, the same procedure was applied to the 95% confidence interval limits, to quantitatively assess the possible impact of the spatial uncertainty on the estimation of the river discharge. The results obtained by both methods, subsequently converted into monthly discharges, were com-pared to the average monthly discharges related to 33-year-long time series measured at different locations along the Foro river. The results obtained with the geostatistical approach proved to be in line with the ones from the traditional method. Additionally, using the rainfall and temperature values obtained with the Ordinary Kriging and the corresponding confidence interval limits, it was possible to quantify the uncertainty associated with the discharge values, making the estimates more reliable than the ones obtained with the traditional approach. However, the yearly distribu-tion of river discharge obtained by both the geostatistical and traditional methods appeared to be dissimilar to the measured ones. In such anthropized and groundwater-dependent river basins, the surface water use as well as the regulatory effect of the alluvial aquifer regime may affect the river discharge variability over the year and then can account for similar discrepancies between the in-flow and outflow water volumes.

Recreational and leisure areas play a special role. These areas mitigate or eliminate the disadvantages of living in large cities, and they enhance the quality of life in small towns. The aim of this study was to analyze the share of recreational and leisure areas in Polish counties in 2022. In Poland, recreational and leisure areas constitute a separate land-use category in cadastral registers. Annual cadastral data from the Land and Building Register at county level (in tabular form) were the main source of data for the study. The analysis revealed that the share of recreational and leisure areas was higher in counties situated in western and south-western Poland, as well as in cities. The spatially varied influence of socioeconomic factors on the share of recreational and leisure areas in Polish counties in 2002 was determined with the use of local Moran's I statistic and geographically weighted regression (GWR). The study confirmed that population density was significantly related to the share of recreational and leisure areas in Polish counties. The impact of the remaining socioeconomic factors associated with spatial and economic development varied across regions. The study also revealed that in addition to the current socioeconomic determinants, the share of recreational and leisure areas in Polish counties was also influenced by historical factors and the counties' development since their establishment.

Based upon a radically new approach, this paper describes a 2-box absolute flow model that calculates the CO2 transfer between the atmosphere and a terrestrial / ocean mixing reservoir. Given the inputs of anthropogenic fossil fuel emissions (CO2ff), atmospheric CO2 mixing-ratio and nuclear weapons bomb yields, the model calculates atmospheric 13C and Δ14C time-series, with the level of agreement for 13C being to within ± 0.05 ‰, for Δ14C to within ± 3‰, spanning 200 years. The model contains only seven internal parameters which are varied to optimize the fit. Yet according to conventional wisdom, this model should not work. It is commonly held that the 13C and 14C isotopic forms of carbon bypass seawater carbonate chemistry, resulting in very different absorption properties (Revelle factor) as compared to 12C. This study rejects this assumption, and uses the same residence time and reservoir mixing properties for all isotopes. The paper includes an analysis justifying why the isotopic bypass of the Revelle factor is not significant. The study describes the use of the model to track CO2ff takeup using two separate measures, a) the amount of molecular CO2ff remaining in the atmosphere and b) the amount of atmospheric growth attributable to CO2ff, thereby resolving discrepancies in published values.

Guiding the visitor to appreciate the sights during an excursion is crucial to building a memorable experience. In the literature, we find many articles exploring the use of sophisticated technologies towards such a goal. The case of tourism proposals for inland areas exhibits a noteworthy aspect, since the presence of human artifacts and the signage may damage the experience, and introduce pollutants as well. This paper analyzes the signage for a natural trail putting into practice a holistic methodology that takes into account all aspects of the problem, starting from the touristic vocation of the area and the social fabric. The analysis indicates slow, community-involved tourism as the preferable target, with extreme requirements of sustainability in the social, economic, and environmental domains for the signage solution. Appropriate governance guidelines are given to implement the proposal. Footprint evaluations address the QR-code technology, which is used to design a real-scale solution finally deployed on the field.

Air pollution is one of the biggest problems of this age, not only it contributes to climate change but also it has a negative effect on public and individual health due to rising morbidity and mortality. There are various contaminants that play a significant role in human disease. Numerous toxins are released into the environment as a result of anthropogenic activities including burning fossil fuels for transportation and electricity generation. In order to assist decision-makers in finding a long-term solution for improving environmental quality and population health status, NO2 pollution monitoring and regulation is an essential task. Based on data acquired from Sentinel-5P, the study presented a comparison of NO2 measurements in Sentinel-5P and ground-based stations over the urban area of Fujairah during 2021 and comparison analysis of the tropospheric NO2 column spatial configuration over urban area of Fujairah during comparable periods of pre, mid and post Covid-19 pandemic era as 2019, 2020 and 2021, respectively. These findings demonstrate remarkable tropospheric NO2 column number density decreases even of 85% in the busier areas of emirate of Fujairah during the pandemic era. Sentinel-5P measurements draw attention to the significant reduction in NO2 pollution over Fujairah during the COVID-19 lockdown where we had less traffic, which is supported by ground stations-based calculations.

Accurate climate data at fine spatial resolution are essential for scientific research and the development and planning of crucial social systems, such as energy and agriculture. Among them, sea surface temperature plays a critical role as the associated El Niño-Southern Oscillation (ENSO) is considered a significant signal of global interannual climate system. In this paper, we propose an implicit neural representation-based interpolation method with temporal information (T_INRI) to reconstruct climate data of high spatial resolution, with sea surface temperature as the research object. Traditional deep learning models for generating high-resolution climate data are only applicable to fixed resolution enhancement scales. In contrast, the proposed T_INRI method is not limited to the enhancement scale provided during the training process and its results indicate that it can enhance low-resolution input by arbitrary scale. Additionally, we discuss the impact of temporal information on the generation of high-resolution climate data, specifically, which month the low-resolution sea surface temperature data is from. Our experimental results indicate that T_INRI is advantageous over traditional interpolation methods under different enhancement scales, and the temporal information can improve T_INRI performance for a different calendar month. We also examined the potential capability of T_INRI in recovering missing grid value. These results demonstrate that the proposed T_INRI is a promising method for generating high-resolution climate data and has significant implications for climate research and related applications.

(1) Background: The main objective of this study was to determine the correlation between element and radionuclide activity concentrations and the growth potential of trees across European mountain beech forests; (2) Methods: As, Cd, Co, Cu, Ni, Pb, and Zn were determined using inductively coupled plasma–optical emission spectrometry (ICP/OES). Mercury was determined by Direct Mercury Analyzer DMA 80 Milestone. The Cr, Rb, Sr, Y, Zr, Sn, Ba, and W were determined by Spectro Xepos Energy Dispersive X-ray fluorescence spectrometry (EDXRF). Gamma spectrometry measurements of 22Na, 40K, 232Th, 226Ra, 238U, 235U, and 137Cs were performed using a coaxial High-Purity Germanium (HPGe) detector; (3) Results: The median values of As for the upper and deeper soil horizon were lower, Ni, Pb, Rb, Sr, Y, Zr, Sn, and W were in the range, while the values of Cd, Co, Cr, Cu, Zn, Hg, and Ba were higher than median values given in the Geochemical Atlas of Europe (GAE) for the upper and deeper soil horizon. The radionuclide activity concentrations varied in approximately the same ranges. The production potential of forest trees ranged from 5262.67 for cambisol and umbrisol soil types on granite and limestone parent materials to 24490.78 for umbrisol and rendzina soil types on granite and dolomite parent materials; (4) Conclusions: Parent material had a significant role in the productivity of European mountain beech forests.

Japanese plums form part of a multi-billion rand deciduous fruit industry in South Africa. Despite this, there is a paucity of knowledge on the seasonal water requirements of plum orchards. In a time of changing climatic conditions and diminishing water resources, this gap in literature poses an imminent threat to the long-term sustainability and global competitiveness of the South African plum industry. Therefore, this paper aimed to provide a review of the available literature on the crop water requirements of full-bearing well-irrigated Japanese plum orchards for improved agricultural water management. Full-year water requirements for well-watered full-bearing Japanese orchards ranged between 921 and 1 211 mm a-1 with a mean value of 1 084 ±140 mm a-1. Canopy growth and pruning appeared to be the most common causes of differences in water requirement estimates. Growing season length also plays a role with late-season maturing orchards having higher water requirements than their early and mid-maturing counterparts. The knowledge review provided benchmark figures for the annual water requirements of Japanese plums. However further research is required to determine the water requirement of plums from planting to full-bearing age and the response of plum trees to water stress, in a South African context.

With the rapid development of cities in northwest China, there has been an increasing focus on groundwater pollution in plateau cities, specifically the common occurrence of nitrate pollution. The special climatic, geological, and geomorphological characteristics of plateau and river valley cities contribute to distinct groundwater chemical characteristics. Therefore, the formation and evolution process of groundwater nitrate contamination differs from that of plain cities. To explore these issues, we conducted an analysis of eight major ions in various groups of water samples from rivers, springs, and groundwater in Haidong. By utilizing factor analysis and correlation analysis, we were able to identify the characteristics and formation of groundwater chemistry and nitrate pollution in Haidong. Our findings reveal that the chemical characteristics of groundwater in Haidong are primarily controlled by rock weathering, mineral dissolution, and evaporation, leading to the formation of highly mineralized groundwater. Additionally, the excessive nitrate content in certain areas is a result of domestic sewage discharge and agricultural fertilizer use, exceeding Chinese drinking water health standards. Furthermore, for cities located in valleys, the geological structure significantly impacts the nitrate content of groundwater in different regions. Areas with obstructed groundwater flow tend to have higher nitrate levels, while regions with unobstructed groundwater experience lower nitrate concentrations. Notably, shallow groundxwater is more vulnerable to nitrate pollution compared to deep groundwater. This study holds great significance in understanding the chemical characteristics of groundwater and the formation and evolution of nitrate pollution in highland river valley cities.

Multibeam echo-sounders provide ideal data for semi-automated seabed feature extraction and accurate morphometric measurements. However, these methods have not been tested in morphologically highly complex environments. In this study, bathymetric and raw backscatter data were initially used to manually map the complex reef morphology found in the semi-enclosed Gera Gulf, in the northern Aegean Sea (Greece). A large number of reefs (more than 7000) were detected, making manual mapping extremely time-consuming. Benthic Terrain Modeller (BTM) was selected as a semi-automated method to map the reefs. The BTM did not function properly in this irregular relief and the results were discouraging. Trying to improve the BTM functionality, both bathymetry and slope were modified (enhanced); this time, the BTM outcome was unexpectedly improved, producing accurate results that appeared to exceed the accuracy of manual mapping. To compare the final maps with the distribution of the reefs, mapcurves were created to estimate the Goodness-of-Fit (GOF), while Precision, Recall, and F1 Score were also calculated. GOF values suggest more than 50% overlap between the resulting polygons while, Precision, Recall and F1 score resulted in values higher than 0.78 suggesting good detection accuracy for the semi-automated method. It becomes apparent that BTM provided more efficient results in comparison to the time-consuming manual mapping. This study asserts that semi-automated mapping stands as an effective method for delineating the geomorphometry of intricate relief and serves as a powerful tool for habitat mapping and decision-making.

Tourism is an important industry that promotes national economic and social progress. All-for-one tourism is a new concept of regionally coordinated development that uses the tourism industry as an engine to boost resource integration, industrial integration, and social sharing. Tourism service is the main embodiment of cultural ecosystem services for all-for-one tourism cities. Taking Liyang in China as an example, this paper used a combination of GIS spatial analysis and big data text mining to evaluate the tourism service from three aspects: the quality of tourism resources, the comprehensiveness of tourism service facilities, and the satisfaction of tourists. The results show that (1) the tourism service is better in the northwestern and eastern areas of the city, while it is lower in the northeastern and southwestern parts; (2) the hotspot areas should focus on improving the tour routes, the transport capacity, and excessive charges; the cold spot areas should work on ecological restoration and creating new tourism attractions by combining the local industries; (3) rural tourism integrating agriculture and visitation should be highlighted as a key growth point to improve the city’s tourism service function.

Abstract: This article explores the intricate relationship between environmental degradation, specifically air pollution, and economic growth in the Sultanate of Oman spanning the period from 1990 to 2022. We employ cointegration and vector error correction models to uncover both short- and long-term dynamics in the association between air pollution and economic growth. Fur-thermore, Granger causality analysis is utilized to investigate the causal links between these crucial variables. This data encompasses factors related to environmental quality and various control variables. The empirical results unveil a sustained long-term cointegration connection between the variables. Additionally, our findings highlight a statistically significant positive impact of economic growth and energy consumption on CO2 emissions. Furthermore, the short-term analysis reveals an annual adjustment of approximately 14.1% in N2O emissions dis-equilibrium. The Granger causality study indicates unidirectional causal relationships involving N2O emissions, economic growth, and CO2 emissions. The implications of these findings for Oman's policy landscape are substantial. To effectively reduce greenhouse gas emissions, it is imperative for Oman to establish robust climate change policies. Additionally, the government can play a pivotal role in encouraging and endorsing the use of renewable energy sources, such as green hydrogen, as a promising alternative to traditional oil and gas resources.

Changes in sea level exhibit nonlinearity, nonstationarity, and multivariable characteristics, making traditional time series forecasting methods less effective in producing satisfactory results. To enhance the accuracy of the predictions of changes in sea level, this study introduced an improved VMD–EEMD–LSTM hybrid model. This model decomposes satellite altimetry data from near the Dutch coast using VMD, resulting in components of the Intrinsic Mode Function (IMF) with various frequencies and a residual sequence. EEMD further dissects the residual sequence obtained from VMD into second-order components. These IMFs decomposed by VMD and EEMD are utilized as features in the LSTM model for making predictions, culminating in the final forecasted results. The experimental results demonstrated significant improvements in the predictive performance compared with the VMD–LSTM model. The RMSE (root mean square error) decreased by an average of 58.68%, the MAE (mean absolute error) reduced by an average of 59.96%, and the R2 (coefficient of determination) increased by an average of 49.85% compared with the VMD–LSTM model. In comparison with the EEMD–LSTM model, the RMSE decreased by an average of 26.95%, the MAE decreased by an average of 28.00%, and the R2 increased by an average of 6.53%. The VMD–EEMD–LSTM model exhibited significantly improved predictive performance.

The World Meteorological Organization (WMO) recommends that the most recent 30-year period, i.e. 1991-2020, shall be used to compute climate normals of geophysical variables. A unique aspect this recent 30-year period is that the satellite-based observations of many different essential climate variables are available during this period, thus opening up new possibilities to provide a robust, global basis for the 30-year reference period in order to allow climate monitoring and climate change studies. Here, using the satellite-based climate data record of cloud and radiation properties, CLARA-A3, for the month of January between 1981 to 2020, we illustrate the difference between climate normal, as defined by guidelines from WMO on calculations of 30-yr climate normals, and climatology. It is shown that this difference is strongly dependent on the climate variable in question. We discuss the impacts of the nature and availability of satellite observations, variable definition, retrieval algorithm and programmatic configuration. It is shown that the satellite-based climate data records show enormous promise in providing climate normal for the recent 30-year period (1991-2020) globally. We finally argue that the holistic perspectives from the global satellite community should be increasingly considered while formulating the future WMO guidelines on computing climate normals.

Water pollution is regarded as a dangerous problem that needs to be resolved right away. This is largely due to the positive correlation between the increase in global population and waste production, especially food waste. Hydrogel beads based on sodium alginate (Alg) and pomegranate fruit peels (PP) were developed for the adsorption of Safranin O dye (SO) in aqueous solutions. The obtained Alg-PP beads were widely characterized. The effects of the contact time (0-180 min) and initial concentration (10-300 mg/l), the initial pH (2-10), the adsorbent dosage (1-40 g/l) and the temperature (293-333 K) were investigated through batch tests. The data proved that the adsorption kinetics of SO reached equilibrium within 30 min and up to 180 min. The adsorption data of SO onto synthesized beads follow the pseudo second-order model. The experimental data fitted very well to both Freundlich and Langmuir models. The maximum adsorption capacity of Alg-PP could reach 8.99 mg/g at 293 K. Calculation of Gibbs free energy and enthalpy indicated that adsorption of SO onto Alg-PP is spontaneous and endothermic. Finally, analysis of diffusion and mass transport phenomena were presented. The reported results revealed that the Alg-PP beads could be used as a novel natural adsorbent for the removal of cationic dye pollutants from aqueous environments.

The use of nitrogen fertilizers can be a source of environmental pollution; the use of or-ganomineral fertilizers can become a nutritional source for crops, ensuring sustainability in the production system. Another alternative approach is through the inoculation and co-inoculation of microorganisms. The objective was to evaluate the development, nutrition, and agronomic yield of common bean through fertilization with organomineral formula "FMO" derived from sewage sludge biosolids, combined with Rhizobium tropici inoculation and co-inoculation with Azospirillum brasilense techniques. Three bean cultivars from different commercial groups, Pérola, BRS Esteio, and BRS Pitanga, were tested. They were subjected to organomineral fertilizer application, orga-nomineral fertilizer application combined with seed inoculation with R. tropici and re-inoculation; seed co-inoculation with R. tropici + A. brasilense prior to sowing, and foliar re-inoculation with R. tropici + A. brasilense. Seed inoculation, combined with foliar re-inoculation at the V4 stage, resulted in higher productivity of common bean. The combination of R. tropici with co-inoculation with A. brasilense generally led to increased productivity compared to mineral nitrogen fertilization. The use of organomineral fertilizer alone enabled gains in development, as well as productivity. The Pérola bean cultivar showed better adaptation to the applied treatments.

This paper provides a data set collected with an underground shaft mobile mapping system equipped with rotated Velodyne VLP-16, Velodyne Ultra Puck VLP-32c, Livox Tele-15, and IMU Xsens MTi-30. The ground truth data was acquired with a geodetic survey including 15 ground control points and 6 Faro Focus 3D Terrestrial Laser Scanner stations of a total 273,784,932 of 3D measurement points. The aim of the paper is to describe the data set of a mining shaft. Obtained mobile mapping data can be the basis for detailed analyzes of the technical condition of the shaft. This data set provides an end-user case study of realistic applications in mobile mapping technology. It provides ground truth data, mobile mapping data and software tools for manipulation and visualization. The project is released and maintained at https://michalpelka.github.io/mine-mapping-dataset/.

As the oil industry increasingly turns to unconventional low-permeability and low-porosity reservoirs, precise post-fracture production prediction is a pivotal instrument in investment de-cision-making, formulation of energy policies, and promotion of environmental assessments. Nevertheless, despite extensive research spanning decades, the precise post-fracture production prediction based on logging parameters remains an intricate task. In this study, we gathered ex-tensive logging data and segmented the post-frac gas production during well testing on the first day to enrich the dataset. Nine pipelines were then architected using various techniques of data preprocessing, feature extraction, and advanced machine learning models. Hyperparameter op-timization was executed via the GridsearchCV. To assess the efficacy of diverse models, metrics including the coefficient of determination (R2), standard deviation (SD), and root mean square error (RMSE) were invoked. Among the several pipelines explored, the PS-NN exhibited excellent predictive capability in specific reservoir contexts (an R2 value of 0.94 and an RMSE of 48.15). In essence, integrating machine learning with logging parameters effectively assesses reservoir productivity at multi-meter formation scales. This strategy not only mitigates uncertainties en-demic to reservoir exploration but also equips petroleum engineers with monitoring on reservoir dynamics, thereby facilitating reservoir development. Additionally, this approach provides res-ervoir engineers with an efficient way of reservoir performance oversight.

Geospatial knowledge in massive academic papers can provide knowledge services such as location-based research hotspot analysis, spatio-temporal data aggregation, research results recommendation, etc. However, geospatial knowledge often exists implicitly in literature resources in unstructured form, which is difficult to be directly accessed and mined and utilized for rapid production of massive thematic maps. In this paper, we take the geospatial knowledge of the area studied as an example and introduce its extraction method in detail. An integrated feature template matching and random forest classification algorithm is proposed for accurately identifying research areas from the abstract texts of academic papers and producing thematic maps. Firstly, the precise recognition of geographical names is achieved step by step based on BiLSTM-CRF algorithm and improved heuristic disambiguation method; then, the area studied is extracted by the designed integrated feature recognition template of area studied using random forest classification algorithm, and a fast thematic map is designed for the knowledge of area studied, topic and literature. The experimental results show that the area studied recognition accuracy can reach 97%, the F-value is 96%, and the recall rate reaches 96%, achieving high accuracy and high efficiency of area studied extraction in text. Based on the geospatial knowledge, the thematic map can achieve the effect of fast map formation and accurate expression.

The usage of biotechnological molecules and processes is an indispensable part of the resource technology research. The development of novel biomolecules therefore needs to be adapted to the existing applicational conditions and biological processes are to be examined. Novel biosorbents may not only contribute to future applications but can be of further used, e.g. to better understand the interaction of known metal- and metalloid-interacting biological molecules and materials. This review highlights biotechnological approaches published so far for bioremediation as well as metal recovery with a special spotlight on cobalt, nickel and arsenic.

The concentrations and fluxes of arsenic (As) and cadmium (Cd) were examined in the hydrological cycle (bulk, throughfall deposition and percolation water), litterfall and soils in a maquis broadleaved evergreen forest stand in western Greece. It was found that the enrichment of As in the atmosphere was both due to suspended geogenic material and long range transfer, whereas for Cd the long range transfer was the predominant way for deposition in the ecosystem. Three models were assessed to find the volumes of percolation water and therefore the fluxes of As and Cd in the water that leave the ecosystem permanently. When calculating the total amounts of the heavy metals in soils, the statistical uncertainty derived from every soil layer has to be taken into account.

By the end of 2023, biowaste must be completely separated or recycled at source based on the EU legislation. Separate biowaste collection and valorisation towards biofuels could play an essential role in the biobased circular economy. In this context, the principal goal of this paper was to demonstrate in pilot scale the technological solution of bioethanol production via the utilisation of urban source-separated biowaste within the city context of Athens, Greece. More specifically, the main aim was the demonstration of a pilot system in continuous operation (over 10 operating cycles) with real feedstock – wet separately collected biowaste. From the 11 pilot trials performed with wet feedstock, the mean starch and cellulose degradation of the pilot trials amounted up to 80.69±16.27% and 79.41±10.37% respectively, while the bioethanol yield was 74.05±6.82%. The latter was comparable to that of more intensive pretreatment methods. Homogenization and shredding that was applied in this study, stand as promising and cost-effective pretreatment methods for bioethanol production from wet feedstock. Further research is needed to optimize conditions and evaluate scalability. Nevertheless, pilot scale testing is a crucial step in the development and deployment of this technology since it serves as a bridge between laboratory research and full-scale implementation, offering a practical and controlled environment to validate and optimize the technology while minimizing risks and uncertainties.

Algal-bacterial granular sludge, a new biological technology, has been widely recognized due to its highly effective pollutant treatment and energy efficiency. This study investigated the effects of environmental concentrations of Cr(VI) (0.5-2.5 mg/L) on the performance of algal-bacterial gran-ular sludge and self-defensive responses after 90 days of cultivation. The results showed that Cr(VI) affected chemical oxygen demand (COD), ammonia-N and phosphate removal with different trends being apparent. A linear decline in COD removal was observed, whereas an initial de-creasing and then increasing ammonia-N and phosphate removal took place. Algal-bacterial granular sludge effectively removed Cr(VI) from wastewater through biological adsorption and reduction, showing the potential to treat Cr(VI)-contaminated wastewater. Cr(VI) affected the community abundance of the algal-bacterial granular sludge, in which Chlorophyceae and cya-nobacteria were vulnerable under Cr(VI)-induced stress. To reduce the toxicity of Cr(VI), over-produced EPS-PN and antioxidant enzymes (MDA, SOD and CAT) acted as self-defensive responses to resist oxidative damage. This study showed that algal-bacterial granular sludge can remove 00.5 mg/L of Cr(VI) without performance loss. It is hoped that this study can provide useful information for improved engineering feasibility of algal-bacterial granular sludge.

The use of Geographical Information Systems (GIS) for biodiversity monitoring and conservation, shortened to Conservation GIS, is an influential tool that has revolutionized conservation efforts by providing spatially explicit data to inform conservation decision-making. However, Conservation GIS also faces challenges related to data quality and availability, technical limitations, as well as policy and governance issues. The diverse and rising uses of GIS for conservation has resulted in a need for continued research and development of Conservation GIS, including advancements in technology and data collection, integration with other fields such as machine learning and artificial intelligence, and collaborative approaches to Conservation GIS. Conservation GIS has the potential to make a significant impact on conservation efforts, and this article emphasizes the importance of its implementation to achieve the broader goal of biodiversity conservation for planetary health. In this review, we discuss the various applications of Conservation GIS, including biodiversity conservation and monitoring, habitat mapping and restoration, climate change mitigation and adaptation, wildlife tracking and management, and protected area management. We highlight some of the key knowledge gaps or research questions that need to be addressed in the future to further advance the field of Conservation GIS. By addressing these challenges and knowledge gaps, Conservation GIS can become a powerful tool for addressing the challenges facing biodiversity and ecosystems worldwide, and for promoting sustainable land-use practices.

As part of the Earth Climate Observatory space mission concept for the direct observation from space of the Earth Energy Imbalance, we propose an advanced camera suite for the high resolution observation of the Total Outgoing Radiation of the Earth. For the observation of the Reflected Solar Radiation, we propose the use of two multispectral cameras covering the range from 400 to 950 nm, with a nadir resolution of 1.7 km, combined with a high resolution RGB camera, with a nadir resolution of 0.57 km. For the observation of the Outgoing Longwave Radiation, we propose the use of 6 microbolometer cameras, with each a spectral bandwidth of 1 μm in the range from 8 to 14 μm, and with a nadir resolution of 2.2 km.

In road construction, before applying an asphalt or concrete surface, the ground must be compacted and stabilized. There are two basic methods of soil stabilization: in situ and in a stationary node (ex-situ). The method of performing stabilization in place (in-situ) is the most frequently used method due to its convenience and lower price. The most popular type of binder for stabilization is a hydraulic binder (most often cement and various ashes). Such stabilization is performed at a depth of 10-50 cm, achieving the desired load-bearing parameters. In order to improve them, various chemical additives for stabilization are often used, such as ion exchange compounds, additives based on sulfuric acid, additives based on vinyl polymers or even organic additives using lignosulfonates. However, the use of such additives is associated with much greater costs and environmental burden, resulting in seeking for cheaper and equally effective alternatives. The win-win situation would be for instance recycling the problematic waste-based materials that on one hand are landfilled or impossible to recycle and on the other hand cause problems for the waste producers. Therefore, an interesting issue is the production of stabilization additives from various types of waste materials. As a result of the extensive testing of various waste-based materials blends with soil, the mechanical (compressive strength after 7 and 28 days) and hydraulic (capillary rise, water absorption, frost resistance) soil properties were measured. The optimization process led to obtaining additives compositions ensuring the best strengthening and sealing properties. These were for sandy soil: Pure foil (wax emulsion), Pure foil (wax emulsion) + waste sulphuric acid, RDF from waste tires (wax emulsion), Pure foil (wax emulsion) + “by-pass” waste ash + NaOHx2 and for clayey soil: Pure foil (wax emulsion) + NaOH, Pure foil (wax emulsion) + waste sulphuric acid, Tequant, Pure foil (wax emulsion).

Ethiopia has been known for its recurrent droughts and poverty due to extreme climate change and variability affecting agricultural production. This study was, therefore, conducted to analyze the seasonal and inter-annual variability in rainfall and temperature v over the past three decades in western Tigray. The study consisted of 34 years of temperature and rainfall data from nine stations in two administrative zones in the western part of Tigray. The climate data was obtained from the National Aeronautic Space Administration (NASA) from 1983 to 2016. Total rainfall, simple daily intensity index, Rx1day and Rx5day, and maximum and minimum temperature, tropical nights, diurnal temperature range, cold spell and warm spell duration indicator values, cold days and cold nights, warm days, and warm nights were analyzed. RClimDex software was employed to analyze the trends and quality control of the extreme rainfall and temperature indices; in addition, the Mann-Kendall test was also used to detect the changes and variability of the variables. The trend analysis showed that there was significant (p<0.05) variability in extreme temperatures, with maximum and minimum temperatures varying from 0.04 to 0.051 0C, and 0.022 to 0.031 0C, respectively. The results also revealed that there was a negative trend in extreme rainfall, with no uniform pattern. The highest and smallest reduction in the annual rainfall was 14.6 mm and 8.4 mm, which were observed at Maygaba and Adigoshu, respectively. More than 60% of the total rainfall was received in July and August throughout the study areas, with the maximum monthly rainfall of 294.2 mm observed at Adiremets. Finally, this study demonstrated that areas in the northwestern and western zones of Tigray were significantly affected by extreme rainfall and temperature variability, which subsequently affected crop yield, natural resources, food security, and the livelihood of the community during the last three decades.

Environmental perception is a powerful tool for identifying community needs and potential within their surroundings. This study assessed tourists' environmental perception regarding solid waste and its impact on the Hurtado balneary, located in Valledupar, Colombia. From May to July 2023, the investigation delved into the environmental attitudes and behaviors of 769 balneary users by employing a combination of observation, photographic documentation, and a comprehensive 21-question online survey. The findings unveiled compelling insights: an overwhelming 98.8% of participants acknowledged the adverse effects of solid waste on the environment, with an impressive 98% demonstrating a willingness to participate in waste management efforts. Alarmingly, 42.13% exhibited limited awareness of waste management practices, reflecting a lack of public interest and commitment (41.61%). Statistically significant disparities emerged: 59% of waste items were not appropriately disposed of in designated receptacles. Reasons for this included a lack of a sense of belonging (50.2%) and inadequate environmental education (45.6%). 96% expressed the need for river conservation signage, while 59.8% had not engaged in environmental training. The implications of these results extend beyond the Hurtado balneary, potentially informing solid waste management strategies in other aquatic environments. Furthermore, this investigation aligns with three critical Sustainable Development Goals: SDG 12, emphasizing responsible consumption and production; SDG 13, addressing climate action; and SDG 15, advocating for life on land and below water. Keywords: Tourism; solid waste; surface water; environmental management.

As an irreplaceable ecological barrier, the ecological conservation developing area (ECDA) is vital for the integrated construction of urban and rural areas, and optimization and adjustment of industrial structure. Developing green agriculture is the foundation and guarantee for improving the rural ecological environment and meeting the increasing needs of farmers′ income. Issued by the Chinese government, No. 1 Central Document stated the necessity of promoting agricultural green development (AGD) and the related technologies in dealing with ecological pressure and resource shortages, especially for large cities like Beijing. However, few empirical studies have conducted on spatiotemporal variations of AGD in ECDA of large cities. Based on the green agricultural traits of Beijing and the accessible data, we evaluate AGD and analyze its spatial and temporal heterogeneity of Beijing ECDA by constructiing a framework with 13 indicators. The weight coefficients of AGD indicators were calculated by the projection pursuit method, with the district panel data from 2006 to 2016. The results demonstrated that energy consumption is a vital factor of green agriculture production, and agricultural output value per unit of the arable land area is the key to the green agricultural revenue. From 2006 to 2016, the AGD index of ECDA had an increasing trend till 2012, followed by a decreasing tendency. The AGD index of the northern region is higher than the southern of ECDA. The obstacle degree model was used to verify AGD limiting factors. They were poor infrastructure, slow agritourism, low labor productivity, and low resource utilization efficiency that varied by districts in ECDA. Given these findings, our study is conducive to the AGD evaluation at the district (county) level for ECDA of large cities and also provides important policy implications.

The Fengcheng Formation in the Mahu Sag of the Junggar Basin was generally composed of detritus, pyroclastic material, carbonates, and evaporites. During the process of sedimentation, the climate was arid or semi-arid. Due to the effect of high concentration and sodium-rich source, an alkaline lake was formed, and alkaline minerals were also preserved in the stratum. After the sediments were buried, three mineral assemblages were formed in the Fengcheng Formation, which are carbonate mineral assemblages (i.e., calcite + ferreous dolomite), reedmergnerite and carbonate mineral assemblages (i.e., reedmergnerite + calcite + ferreous dolomite), and reedmergnerite and alkaline mineral assemblages (i.e., reedmergnerite + shortite + trona), respectively. According to the homogenization temperature of reedmergnerite primary fluid inclusions, alkaline diagenesis of Fengcheng Formation is divided into early stage（≤100℃） and middle stage（＞100℃）, respectively. The former is characterized by the generation of ferreous saddle dolomite, quartz dissolution, and agglutination of the laumontite, which occurred under normal burial conditions. The latter is marked by the reedmergnerite’s appearance, which is correlated to deep hydrothermal activity controlled by faults. Finally, based on sedimentary and diagenetic factors, including climate, provenance, diagenetic surroundings, and the action of subsurface fluid, the alkaline deposition-diagenesis model for shale series in four stages of the Fengcheng Formation was established.

An especially important species in southern Brazil, yerba mate (Ilex paraguariensis) is traditionally consumed as tea, chimarrão and tererê. Yerba mate consumption has been stimulated by scientific discoveries that have identified high concentrations of bioactive compounds and their health benefits. There are no studies or scientific evidence to certify or guarantee stability of these compounds’ concentrations during different years in the same plants. We were interested in quantifying caffeine, theobromine, total phenolic compounds and proteins concentrations in leaves of yerba mate genotypes and their stability in the same plants over four consecutive years. Mature leaves from yerba mate genotypes selected on a provenance and progenies trial were collected in August of 2015, 2016, 2017 and 2018. Methylxanthines (caffeine and theobromine), total phenolic compounds and total protein contents were quantified. Our results indicate large variations between genotypes regarding caffeine (0.035 to 2.385 g 100 g^-1), theobromine (0.0004 to 1.772 g 100 g^-1), total phenolic compounds (7.028 to 9.424 g 100 g^-1) and proteins (10.39 to 16.58 g 100 g^-1) contents, and also high stability of those compounds over the four evaluated years. A great variation of the studied bioactive compounds in different Ilex paraguariensis genotypes was found and its stability over four consecutive years was showed.

Knowledge of water availability in terms of spatial (i.e., depth) and temporal variability of soil water is essential to describe soil water infiltration and storage processes accurately. Therefore, performing simulations of soil water dynamics can be a valuable tool to evaluate different land uses and their impact on water availability. Consequently, this study aimed to model the volumetric soil water content (θ, cm3 cm-3) under agroforestry systems (AFS) with cocoa. For this purpose, the θ was monitored at different depths (0-20, 20-40, 40-60, 60-80, 80-100 cm) in the soil profile of four plots (20 × 50 m) of cocoa under agroforestry systems. Environmental conditions significantly influenced the water balance of the cocoa crop. There were seven moments when evapotranspiration (ET0) was higher than 5 mm d-1. During those moments, the environment exhibited higher PAR values of 1041 µmol m-2 s-1, very low atmospheric relative humidity (RHa) levels (around 45%), higher ambient temperatures of 32.2 ºC and a vapor pressure deficit of 1.6 kPa whose θ levels reached 0.32 cm3 cm-3 and a water balance of -5.7 mm, which presented negative values during most of the study period. The θ obtained from the HYDRUS-1D model presented a slight bias as a high level of coherence between the observed values, based on the model's goodness-of-fit estimators. The above provides accurate simulations of soil water content at various depths, much-needed information for management schemes for cocoa cultivation under agroforestry systems.

The overall seismicity of Pakistan from 24 B.C to 2020 is analysed in terms of its multifractal behaviour. Seismic events of magnitude ML=3.0 and above are spatially clustered into four distinct groups, each one corresponding to a different region of high seismic activity. The Multifractal Detrended Fluctuation Analysis (MFDA) method applied on each cluster reveals pronounced inter-cluster heterogeneity in terms of the resulting generalised Hurst exponent and fractality spectrum, possibly due to the particular tectonic characteristics of the regions under investigation. Additional results on the variability of the Gutenberg–Richter b‐value across the defined clusters further corroborate the uniqueness of the seismic profile of each region.

The Mahuagou gold deposit is among the most important gold deposits in the core of Huangling Anticline. However, the geochemical exploration on the surface of the mining area presents challenges due to the thin overburde.This paper focuses on the overburden soil of Fengxiangshugou (FXS) – Mahuanggou (MHG) section as the research object, utilizes chemical form analysis of gold, soil halogen survey, and heat-released mercury survey to determine the key deep-penetrating geochemical methods for mining area. The results indicated that Si and Al components of samples exhibit minimal variation, suggesting that drift loads did not influence the overburden soil. Based on the systematic clustering, As, Sb, Mo, Bi, W and Hg emerge as ore-body or ore-belt front elements of hydrothermal gold deposits. In the study area, the predominant chemical form of gold in soil is the strong organic bond. Compared to the total amount, strong organic bound gold and heat-released mercury show higher anomaly contrasts, making them crucial indicators of faults, intrusions and hidden ore bodies. Consequently, chemical form analysis of gold and heat-released mercury surveys can enhance the anomaly contrast, proving beneficial for geochemical prospecting for weak anomalies in this area.

In Ethiopia, climate change risks are anticipated to have significant consequences for agriculture and food security. This study investigated the past (1981-2010) and the future (2041-2070) climate change trends and their influence on crop length of growing seasons in North-Western (NW) Ethiopian highlands. Climate data were obtained from National Meteorological Agency of Ethiopia and the most valid and high resolution CMIP5 rcp6 (Coupled models Intercomparison Project representative concentration path six) model data were extracted and applied for the analysis purpose. Standard statistical methods are then applied to compute soil water content as well as to evaluate climate variability and trends and their impact on crop Length of Growing Season (LGS). Maximum temperature (tasmax) and minimum temperature (tasmin) inter-annual variability anomalies show the region has experienced coolest years than hottest years during the past. However, in the future the coolest years will highly decrease by -1.2oC while the hottest years increase by +1.3oC. During the major rainfall season (JJAS), the area has received an adequate amount of rainfall in the past and is very likely to get similar rainfall in the future. Whereas the February to May (FMAM) season assists only for early planting and October to January (ONDJ) season for lengthen growing season of JJAS if properly utilized. Otherwise, the season will have the possibility to destroy crops before and during the harvesting time. The soil water content change in the future remains close to past condition, The length of growing seasons has less variable onset and cessation dates while the projected length of growing period (LGP) 174 to 177 days will be suitable for short, long cycle crops and double cropping that could benefit crop production yield of NW-Ethiopian highlands in the future.

In this study, we conducted experiments to assess the forecasting capabilities for the tropical cyclone (TC) genesis over the South China Sea using the ensemble-based data assimilation system (EPS-DA) by WRF-LETKF. These experiments covered forecast lead times of up to 5 days and spanned a period from 2012 to 2019, involving a total of 45 TC formation events. The evaluation involved forecast probability assessments and positional and timing error analysis. Results indicated that successful forecasting depends on lead time and initial condition quality. For TC formation from an embryo vortex to tropical depression intensity, the EPS-DA system demonstrated improved accuracy as the forecast cycle approached the actual formation time. TC centers converged toward observed locations, highlighting the potential of assimilation up to 5 days before formation. We examined statistical variations in dynamic and thermodynamic variables relevant to TC processes, offering an objective system assessment. Our study emphasized early warnings of TC development appear linked to formation-time environmental conditions, particularly strong vorticity and enhanced moisture processes.

Abstract: Agroforestry has a sustainable attributes with both tangible and nontangible benefits. In this study carbon mitigation and credits potential of traditional agroforestry systems at different elevations were evaluated. These traditional systems are: Agrihortisilviculture system (AHS), Agrihorticulture system (AH) and Agrisilviculture system (AS). Stand density, living biomass carbon and soil carbon were measured in each sample plot. The results were that stand density of woody perennials varied from 61 to 233 tree ha-1 across t elevations and systems, and , Grewia oppositifoila was the predominant tree species occupying most of the agroforestry land use system. Plant and soil organic carbon were significantly different (P ≤ 0.05) among systems and elevations. Total carbon including plant and soil was significantly higher in the AH system at upper elevations. Total carbon emmision mitigation varied with changing elevations and systems, being highest at lower elevation with AHS system. The total carbon credits was also recorded high at lower elevation, whereas the total value of C credits was higher at mid elevation due to the estimated agroforestry area. The total value of C credits from all agroforestry systems was observed (128977.59 €) of the study area.

The coastal zone faces an ever-growing risk associated with climate-driven change, including sea level rise and increased frequency of extreme natural hazards. Coastal processes are governed by the dynamic ocean and atmospheric factors with constantly changing conditions. Often the location and dynamism of coastal regions makes them a formidable environment to adequately study with in-situ methods. Remote sensing methods offer an alternative to in-situ monitoring. In this study we use Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) to make measurements of basic wave parameters and wave directionality in the Hawaiian Islands and North Carolina, USA. ICESat-2 has existing Level-3a data products, Ocean Surface Height (ATL12) and Inland Water Elevation (ATL13), providing some wave and ocean surface elevation data. ATL12 provides sparse global average measurements of the sea surface elevation, slope, and roughness along ICESat-2 tracks and ATL13 provides wave metrics at variable length scales out to ~7 km from the coast and does not maintain the 0.7m along-track resolution of the primary Level-2 data product (ATL03). Our goal was to leverage the full resolution data available in ATL03 to generate wave metrics out from shore up to ~25 km. Using a combination of statistical and signal processing methods we can use ICESat-2 to generate basic wave metrics, including significant wave heights with an accuracy of ±0.5m. In some profiles we can identify wave shoaling, which could be used to infer bathymetry. In areas with complex wave dynamics, the nature of how ICESat-2 measures elevations (parallel laser altimetry beams) can make extracting some wave parameters (e.g., wavelength and directionality) more challenging. These wave metrics can provide important data in support of validating wave and tidal models and may also prove useful in ICESat-2 bathymetric corrections and satellite derived bathymetry.

The water resources carrying capacity (WRCC) system comprises multiple complex and nonlinear interactions related to society, economy, water resources and the water environment. A full understanding of its internal mechanism is conducive to the further improvement of the regional WRCC. This article focuses on the temporal and spatial variability of WRCC to explore a method of dynamic successive assessment. Firstly, the Pressure-State-Response (PSR)framework is used to develop a systematic and causal indicator system. Then, The Variable Fuzzy Pattern Recognition (VFPR) model and an analytic hierarchy process-entropy (AHP-E) model are combined to successively and dynamically assess WRCC. The proposed method is applied to the dynamic successive assessment of WRCC in Hebei Province, and it is obtained that the poor water resources carrying capacity in Hebei Province is mainly due to the basic attribute of the decision of the water resources shortage, but Hebei Province actively adopts a variety of measures to save water and pressurize mining, which makes the province's water resources carrying capacity have a tendency to become better gradually. At the same time, the system dynamics model (SD) of water resources carrying capacity based on the analysis of the model structure was established. Moreover, three scenarios were designed, including existing continuation, high-efficiency water-saving, cross-regional water transfer and coordinated development, each scenario divided into high and low-speed economic development and population growth schemes, then total 6 schemes between 2023 and 2030 were simulated and predicted respectively. The results indicate that if the current development model is adopted, the water resource carrying capacity will continue to maintain low levels. It was concluded that the high-speed development of economy and population, the efficient water conservation and inter-basin transfer scenario (scenario 2 with high-speed) is the best choice for sustainable development of water resources and social economy in Hebei.

This study analyzed the changes and trends in twelve extreme precipitation-based climate indices obtained using daily data from 10 synoptic stations in the Chungcheong region of South Korea during the 1973-2020 period. The climate indices were used to assess the trends in the extreme precipitation characteristics of duration, frequency, and intensity using the innovative trend analysis (ITA) method. The results of the ITA were further compared with two other non-parametric test methods such as Mann-Kendall (MK) and Spearman’s rho (SR). The results showed that the most stations exhibited significant increasing trends in all the investigated climate indices at a 95% confidence level as indicated by the ITA method, with only a few stations indicating significant decreasing trends in R95p, R99p, Rx3day, and Rx5day. The sub-trend analysis further revealed the dominance of neutral behavior around the low-value cluster, especially for the extreme precipitation duration. At the same time, increasing trends dominate the high-value cluster in most stations. Meanwhile, only R10mm, R95p, and R99p exhibited monotonic trends in the Boeun, Seosan, and Boeun stations, respectively. Further, the ITA exhibited superior performance over the MK and SR methods by indicating the presence of more significant trends in the climate indices at most stations. The distribution of extreme precipitation indices for duration, frequency, and intensity indicate the pronounced risk of flood condition around the north-central and some parts of southern regions, while the western region indicate a potential drought risk, which could greatly impact the water resources and consequently agricultural activities in the study area. The results of this study provide essential information for addressing the climate-related problems of water resources management and agriculture in the study area and other related climatic regions.

Low Emission Zone (LEZ) is an important mechanism to limit the negative environmental impact of traffic pollution in an urban area. Car traffic in the zone is strictly regulated to meet certain technical and environmental criteria. Such solutions of urban environment protection are gaining popularity, especially in European conurbations. Nowadays there are above 300 zones in Europe, mostly established in Italy and Germany. So far there are no LEZs in Eastern and Central European countries. However, the Warsaw authorities are just discussing launching of a LEZ in the city in 2024. According to the ongoing project, the zone is to be launched gradually, in five phases between 2024 and 2032, with the traffic criteria being tightened accordingly. The progressive emission reductions of the predominant pollutants in LEZ in consecutive phases were estimated on the basis of the Real Driving Emissions (RDE) test, carried out in 2020 by the ICCT. The gradually reduced emissions of NOx and PM were subsequently utilized as the input dataset for the regional CALPUFF model predictions, to calculate concentrations of these main traffic-induced pollutants within the LEZ area. The direct effect of the zone activation is reduction of air pollution in the urban center, which is mostly exposed to the pollution risk due to heavy traffic. Computer simulations reveal that implementation of the zone in the case of Warsaw will result in a quite significant reduction of NOx concentrations within the LEZ, such that its mean concentration in the zone becomes comparable to the rest of the conurbation. However, it will bring only a slight reduction of PM2.5 concentrations. This situation is due to the long-standing dominance of coal combustion in the Polish economy, which also applies to the urban municipal sector. As a consequence, particulate matter emissions of this sector are clearly predominant over the road traffic contribution. Balance can be achieved once the ongoing de-carbonization of the national economy has been completed.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

Early spaceborne laser altimetry mission development starts in pre-phase A design, where diverse ideas are evaluated against mission science requirements. A key challenge is predicting realistic instrument performance through forward modeling at arbitrary spatial scale. Analytical evaluations compromise accuracy for speed, while radiative transfer modeling is not applicable at global scale due to computational expense. Instead of predicting arbitrary properties of a lidar measurement, we develop a baseline theory to predict only the distribution of uncertainty specifically for the terrain elevation retrieval based on terrain slope and fractional canopy cover features through a deep neural network gaussian mixture model, also known as a mixture density network (MDN). Training data was created from differencing geocorrected GEDI L2B elevation measurements with 32 independent reference lidar datasets in the contiguous U.S. from the National Ecological Observatory Network. We trained the MDN and selected hyperparameters based on regional distribution predictive capability. On average, the relative error of equivalent standard deviation of predicted regional distributions was 15.9%, with some anomalies in accuracy due to generalization and insufficient feature diversity and correlation. As an application, we predict the percent of elevation residuals of a GEDI-like lidar within a given mission threshold from 60°S to 78.25°N, which correlate to qualitative understanding of prediction accuracy and instrument performance.

This study examines the wind shear coefficient (WSC) values at three coastal wind sites located in the southern region of Balochistan, Pakistan: Pasni, Ormara, and Jiwani. These WSC values were obtained using 10-minute measured wind speed data at heights of 20, 40, and 60 meters above ground level (AGL). Since wind measurements are typically recorded at lower heights due to cost and resource constraints, extrapolation techniques were employed to estimate wind speeds at higher altitudes. However, using a constant WSC value for extrapolation may lead to significant errors between extrapolated and actual wind speed measurements, impacting the energy output of wind turbines. To evaluate the effect of WSC on energy yield, the study employed power curves and frequency distributions for 2MW and 1.5MW wind turbines. Additionally, wind power density was calculated using air density derived from measured air temperature and surface pressure data, covering two years period from November 2016 to August 2018. The overall mean WSC values were found to be 0.076 at Pasni, 0.094 at Jiwani, and 0.053 at Ormara. The study further investigated the seasonal, monthly, and diurnal variations of WSC. For assessing wind resources at a height of 60m, the study utilized Wind Roses, wind power density, and Weibull parameters. Comparing the actual WSC values presented in this paper with those obtained using the 1/7 power law and measured data at 60m AGL, the energy yield from the wind turbines showed reduced output and capacity factor.

Recent technological advances have significantly increased the data volume obtained from deep space exploration missions, making the downlink rate a primary limiting factor. Particularly, JAXA’s Martian Moons eXploration (MMX) mission encounters this problem when identifying safe and scientifically valuable landing sites on Phobos using high-resolution images. A strategic approach in which we effectively reduce image data volumes without compromising essential scientific information is thus required. In this work, we investigate the influence of image data compression, especially as it concerns the accuracy of generating the local Digital Terrain Models (DTMs) that will be used to determine MMX’s landing sites. We obtain simulated images of Phobos that are compressed using the CCSDS-120 with integer/float-point discrete wavelet transform (DWT), candidate algorithms for the MMX mission. Accordingly, we show that, if the compression ratio is 70% or lower, the effect of image compression remains constrained, and local DTMs can be generated within altitude errors of 40 cm on the surface of Phobos, which is ideal for selecting safe landing spots. We conclude that the compression ratio can be increased as high as 70%, and such compression enables us to facilitate critical phases in the MMX mission even with the limited downlink rate.

This academic paper explores the synergistic potential of Agroforestry systems and Climate-Smart Agriculture (CSA) in enhancing climate change adaptation strategies. Focusing on Australia and Pacific Island Countries, the study delves into the pivotal role of these approaches in mitigating the impacts of changing climate variables on agricultural production. By analysing important climate variables, their potential alterations, and their subsequent effects on crop production, the paper advocates for a holistic and forward-thinking approach to sustainable agriculture in the face of climate change.

Tropical cyclones (TC) are dangerous weather events and accurate monitoring and forecasting can provide significant early warning to reduce loss of life and property. However, the study of tropical cyclone intensity remains challenging, both in terms of theory and forecasting. ERA5 reanalysis is benchmark data set for tropical cyclone studies, yet the maximum wind speed error is very large (68 kts) and still 19 kts after simple linear correction even in the better sampled North Atlantic. Here, we develop an adaptive learning approach to correct the intensity in the ERA5 reanalysis, by optimising the inputs to overcome the problems because of the poor data quality and updating the features to improve the generalisability of the deep learning-based model. Specifically, we use TC knowledge to increase the representativeness of the inputs so that the general features can be learned with deep neural networks in the sample space, and then use domain adaptation to update the general features from the known domain with historical storms to the specific features for the unknown domain of new storms. This approach can reduce the error to only 6 kts which is within the uncertainty of the best track data in IBTrACS in the North Atlantic. The method may have wide applicability, such as extending it to the correction of intensity estimation from satellite imagery and intensity prediction from dynamical models.

Tourism carrying capacity remains pivotal for ensuring sustainable development within protected terrains, accentuating the balance between conservation, socio-economic benefits, and visitor satisfaction. This study delves into the intricate dimensions of this balance, focusing on the Katon-Karagay National Park (KKNP). Merging comprehensive empirical data accrued from fieldwork within the park, calculations surrounding recreational loads, and a synthesis of relevant literature, the study designed a methodology. This included calculated techniques incorporating ecological and tourist social capacities, the psychocomfort approach, and an ongoing monitoring approach, supplemented by exclusive data from the park's administration. Key findings underscored the significance of an adaptive balance, revealing specific permissible recreational loads for different park zones. For instance, zones of quiet recreation evidenced up to 5 people/ha, while active recreation zones fluctuated between 20 to 100 people/ha. Monitoring evidenced critical environmental changes, shaping recommendations for effective tourism flow regulation, ensuring alignment with established norms and ecological preservation. The exploration substantiates the indispensability of a meticulously structured approach to ascertain tourism carrying capacity, emphasizing the harmony achievable between environmental sanctity and human pursuits. KKNP's empirical data serves as a paradigm, guiding sustainable tourism frameworks for similar ecologically sensitive regions.

A geopark as a modern product of geotourism and territorial management currently represents a new way of protecting and preserving geoheritage, which is closely related to knowledge and education, increases general awareness of the value of the Earth and, on the other hand, represents the support and development of the territory. The fulfilment of geopark goals, together with the purpose and activities, emphasizes the need for an effective management structure and function of the whole. The contribution is aimed at clarifying the management issues of geoparks, presenting the specifics affecting management in the conditions of the Slovak Republic, and defining management areas derived from the essential geopark functions. Based on determining management areas and their specifics, the task is to define a suitable management structure applicable in geoparks, representing a supporting link in creating plans and management methods.

Drone imagery has the potential to enrich urban planning and preservation, especially where it converges with the growing creation and use of 3D models. The authors have conducted a systematic literature review of articles published between 2002 and 2022, drawing from reputable academic repositories including Science Direct, Web of Science, and China National Knowledge Infrastructure (CNKI), to identify current gaps in existing research in the application of UAVs to the creation of 3D models in urban planning and preservation. Findings indicate five research shortcomings: limited participation of planning experts, research focus imbalance, lack of usage for special scenarios, lack of integration with smart city planning, and limited interdisciplinary collaboration. The study also acknowledges current limitations with UAV applications and discusses possible countermeasures as well as future prospects.

Calcium and magnesium are important not only for human health, but also for reducing problems related to the corrosive and aggressive effects of soft water on drinking water distribution materials. Experimental and mathematical modeling of the recarbonization process aimed at increasing the content of these biogenic elements in water was carried out using the novelty of a continuous laboratory and pilot scale fluidized bed reactors. Water remineralization using half-calcined dolomite (HCD) and carbon dioxide was used. The influence of operating conditions Q(CO2), freshwater inflow and HCD dose on quality indicators of treated drinking water (c(Ca2+), c(Mg2+), c(Ca2++Mg2+) and Ca/Mg) was studied. The results show that the concentration of Mg2+ is more significantly affected by the amount of HCD in the system and the flow of CO2. The influence of freshwater inflow on the Mg2+content is to a lesser extent. At a constant CO2 flow, therefore, as the tap water inflow increases, the Ca2+ content decreases and the Mg2+ content increases, which has results in a decrease in the Ca/Mg molar ratio. However, the Ca/Mg ratio can be effectively controlled by adding an appropriate amount of HCD at certain time intervals. Overproduction of ions is easily controlled by CO2 flow.

The Limpopo estuary mangrove forest covers about 928 ha, however 382 ha remain intact and 546 ha were degraded after the 2000 floods. Mangrove replanting campaigns have been carried out at the site. This article aims to evaluate the structure and carbon pool of aboveground and belowground living biomass and soil carbon in natural and replanted mangrove forests (2016, 2014 and 2010). The methodology consisted of selecting 40 strata where structural data were collected. Living biomass above and below ground and soil carbon was obtained based on the methodology described by Kauffman and Donato (2012). The results showed that A. marina was the most observed species in all study areas. The carbon reserve of living biomass above and below ground in the natural forest was 67.9±100.9 MgCha -1 and 65.0±77.1MgC ha -1 , respectively; and in the planted forests (2016, 2014, 2010) it was 1.1±0.5MgCha-1 and 2.1±1.0MgCha-1, 1.8±1.0MgCha-1 and 3.6±2.0MgCha-1, 3.7±2.0MgCha-1 and 5.3±2.5MgCha-1 . Soil carbon reserve was 229.4±119.4 MgCha-1 in natural forest and 230.3±134.8 MgCha-1 , 234.8±132.7MgC ha-1, 229.4±119.4 MgCha-1 in planted forests (2016, 2014, 2010). The total carbon reserve in the natural forest was 362.3 MgCha-1 and in the planted forestsn(2016, 2014, 2010) it was 233.5 MgCha-1 , 240.2 MgCha-1, 246.4 MgCha-1. Natural and restored forests had similar anoumts of soil carbon, which reinforces the idea that soil is a stabel carbon pool. Morever, restored forests failed to store the same amount of live biomass (an carbon), which supports the idea that it is better to prevent habitat degradation than to restore it.

The antimicrobial properties of the new strains of microorganisms isolated from natural sources of various ecological niches in the Moscow Region and the Republic of Tatarstan were studied. An antifungal activity of isolates was established in a test culture of toxin-producing microscopic fungi that cause various plant diseases: Fusarium oxysporum, Aspergillus flavus, Penicillium spp. and Candida albicans. Of the 46 studied microorganisms, 4 isolates (Bacillus subtilis, Propionibacterium freudenreichii, Lactobacillus plantarum and Streptomyces spp.) showed an ability to produce biologically active metabolites with a pronounced antimicrobial potential. This is promising in the growth and protection of the Scots pine, pedunculate oak and small-leaved linden forest crops from diseases caused by fungi Lophodermium pinastri Chev. and Microsphaera alphitoides stimulation. Based on selected isolates, a Bacterial product LRV composition has been developed. A Scots pine, pedunculate oak and small-leaved linden seedlings single and double foliar treatment with Bacterial product LRV at a concentration of 10 ml/l led to an increase in the growth of an above-ground part by 31.8, 51.9 and 25.4 %, respectively, and an underground part – by 25.0, 37.2 and 25.7 %, respectively, compared with the control. The weight of seedling at the end of the study exceeded the control variant by an average of 26.0, 44.0 and 78.0 %, respectively. A use of a plant protection Bacterial product LRV did not have a significant effect on a powdery mildew and Schütte disease damage to forest crops. A Biogeosystem Technique methodology has been developed to improve a long-term forest growing.

Weather radar plays a crucial role in the monitoring of severe convective weather. However, due to its limited detection range, it cannot conduct effective monitoring in remote offshore areas. Therefore, this paper utilized the Unet++ to establish a model for retrieving radar composite reflectivity based on Himawari-9 satellite datasets. In the process of comparative analysis, we found that both satellite and radar data exhibit significant diurnal cycles, but there are notable differences in their variation characteristics. To address this, we established 4 comparative models to test the influence of latitude and diurnal cycles on the inversion results. The results show that adding the distribution map of the minimum cloud-top brightness temperature at the corresponding time in the model can effectively reduce the root mean square error (RMSE) of the model and enhance the accuracy of severe convective weather monitoring. This conclusion can be applied in the future to enhance and improve satellite quantitative precipitation estimation.

Both globally and in Hungary, agriculture is one of the industries that is most vulnerable to weather and climate extremes. Intense temperature rises, spatial and temporal variations in precipitation, and significant changes in extreme climatological and weather parameters have contributed to changes in the conditions of cropland, crop losses, and impacts on crop quality in recent years. This paper depicts the transformation of the domestic agricultural sector due to the extreme drought shock of 2022, as well exploring the adaptation strategies applied. The research is based on official agro-climate database and crop data, and the temperature, precipitation, and radiation during the growing season are all examined. The agro-meteorological properties in Hungary had to be investigated for the entire year and all four of its seasons, with indicator analysis projected onto the ever-increasing and dormant seasons. Long-term climate analysis is necessary to understand the historic drought of 2022 and the success of future adaptation and mitigation techniques. The results can help smallholders effectively reduce the adverse impacts of drought conditions, thereby increasing their adaptation to similar shocks.

The paper in question explores the connection between green areas and urban well-being in an effort to give readers a comprehensive grasp of the topic. The major goals of this study are to evaluate how green spaces affect urban residents' physical and mental health, sense of community, and general quality of life. This research presents numerous major conclusions through a thorough investigation of the current literature and empirical analysis of urban environments across various areas. First of all, it shows that being close to green spaces is associated with better physical health, including a decline in obesity and cardiovascular disease rates. Second, green areas are linked to better mental health, with residents of greener neighbourhoods reporting reduced levels of stress, anxiety, and sadness. However, neighbourhoods having green open grass areas have greater levels of social interaction, and cohesion, which encourages residents to feel a sense of belonging. Lastly, this study highlights the positive impact of green spaces on overall urban quality of life, as they contribute to cleaner air, lower noise pollution, and increased property values. The implications of these findings are significant for urban planning and policy development. They underscore the importance of prioritizing green spaces in urban design, as investments in such areas not only promote physical and mental health but also enhance social bonds and elevate the overall liveability of cities. This research provides a foundation for evidence-based decision-making in urban development to create healthier, more vibrant, and sustainable urban environments.

Understanding the evolving hydrological characteristics of landslide-induced barrier lakes is crucial for flood control, forecasting, early warning, and safety measures in the reservoir area. This study examines the changes in hydrological characteristics of the Attabad landslide-dammed lake over the past decade after the occurrence of the landslide, focusing on lake area dynamics and sediment concentration. High-resolution satellite images from QuickBird, Pleiades, and WorldView2 over seven periods were analyzed. The findings indicate that the lake area has gradually decreased, with the center of mass shifting towards the lake dam, indicating a trend towards stability. The suspended sediment in the barrier lake is distributed in a strip running from north to south, then northeast to southwest, with sediment concentration decreasing from the lake entrance to the dam and from the lake bank to the center. Over time, the average sediment concentration has decreased from 2010 to 2020, with higher concentrations in summer than in winter. Notably, during the 2017-2020 period, the lower-middle parts of the lake experienced higher sediment concentration, while the dam area witnessed lower concentrations, thereby reducing the sediment impact on the dam.

Detecting abrupt transitions in ecosystems, known as regime shifts, holds immense implications for conservation and management endeavors. This research aims to investigate the feasibility of developing an early warning system capable of identifying an upcoming critical transition within Mangrove Forest ecosystems. Employing a fusion of remote sensing analysis, time series analysis, and the critical slowing down theory, Mangrove Forests' state change was explored across two distinct study sites. One site has been adversely affected by disturbances stemming from land use and land cover changes, while the other serves as an unaffected reference ecosystem. The study uses data from the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite, quantifying three remotely sensed indices: the Normalized Difference Vegetation Index (NDVI), the Modified Normalized Difference Water Index (MNDWI), and the Modified Vegetation Water Ratio (MVWR). Furthermore, temporal alterations in land-use and land cover are scrutinized using Landsat data from 1996, 2002, 2008, and 2014. To identify early warning signals of critical transitions, indicators such as autocorrelation, skewness, and standard deviation are applied. The results show the robust capabilities of remote sensing in generating early warning signals of critical transition in Mangrove Forests. NDVI outperformed MVWR and MNDWI as ecosystem state indicators. This study not only highlights the potential of remote in identifying the approaching regime shifts in Mangrove Forest ecosystems but also adds knowledge on ecosystem dynamics. This is the first report of the successful application of remote sensing in generating early warning signals for imminent critical transitions within Mangrove forests in the Middle East.

By definition, a cell is the smallest unit of biological life. This means that every living thing can be fundamentally narrowed down to a composition of cells working together for the furtherance of that being in existence. With the dawn dawn of the evolutionary theory that bespeaks of life commencing some 〜3.8 billion years ago with RNA strands that underwent evolution to become DNA, which led to what we have now as life in the world, or with the Panspermia hypothesis, assuming that life on Earth was seeded from space, what is being considered in this work pertains to the origin of life. In addition to the plethora of intuitive stances that concern the origin story of life, this work will only add to the these. The major hypothesis in this work is that the continuity of life, as pertaining to its procession from parent to offspring provides fundamental links to the origin of life and this is the major consideration that will be given. It is thus apparent that the cells that would be considered are germ cells and not somatic cells. A cursory look at the continuity of life, should give us clues as regards how life originated. We nonetheless, take into consideration the fact that some features due to its non-use have gone extinct, thus taking with them the needed knowledge to breaking even as regards our inquiry. Even at that, we propose that conjectures, hypothetically, can be made based on the physical evidence that is available to us today.

In recent years, the genesis of natural gas and the definition of major gas source rocks in the Baiyun Sag of the Pearl River Mouth Basin have attracted extensive attention from scholars. There is still considerable controversy over the genesis and the main gas source rocks of natural gas. In this study, the chemical kinetics method of natural gas generation and carbon isotope fractionation was used to study the generation history and isotope evolution history of Paleogene natural gas in the Y5 well area located on the north slope of Baiyun Sag. And other geochemical discriminant methods were applied simultaneously to determine the type and source rocks of natural gas. The results show that the natural gas in the Y5 well area on the northern slope of Baiyun Sag is mainly kerogen degradation gas, mixed with a small amount of oil cracking gas. The mixture of kerogen degradation gas and a small amount of crude oil cracking gas caused the inversion of the carbon isotope sequence of ethane and propane. The natural gas in the Y5 well area mainly comes from delta–shallow lacustrine facies source rock. The high–quality reservoirs in the shallower strata accumulate natural gas generated in the early stage, and the tight reservoirs in the deeper strata mainly accumulate natural gas generated in the late stage.

The present article summarises Earth Observation (EO)-based rice mapping strategies since 1979, with a focus on data, methodologies, and methods based on 3,700 research publications across global literature and its comparison with the Vietnamese Mekong Delta (VMD). Various quan-titative analyses were conducted through bibliometric analysis using the VOS viewer and Scopus database. Optical images, particularly MODIS and Landsat time series datasets, were found to be the most commonly utilized. Landsat data had the highest share in the global context, while MODIS data research dominated in the VMD, while Sentinel series data and the Google Earth Engine (GEE) platform became more popular in recent years. The research on rice mapping using UAVs has been gradually creeping into global rice mapping research but is a loophole yet to be implemented in the VMD. The most widely used approaches for rice mapping globally were Random Forest, Support Vector Machine, and Principal Component Analysis. Indices like EVI, NDVI, and RVI were commonly used for rice mapping and monitoring. The findings underscore the critical role of EO-based rice mapping studies in the VMD in addressing sustainability and food security chal-lenges.

Evaluating of long-term satellite-derived ocean color products using in-situ measurements is essential to ensure data quality and integrity. In this study, the Visible Infrared Imaging Radiometer Suite (VIIRS) remote sensing reflectance (Rrs) products were evaluated and analyzed by using long-term OC-CCI in-situ data from 2012 to 2021. The results demonstrate that the root mean square difference of VIIRS Rrs product accuracy in most bands is better than 0.002 (sr-1) when considering its average life span of 12 years. However, the VIIRS Rrs products in shorter wavelength bands (e.g., at 412 nm) had significantly lower accuracy in general and a long-term bias over the recent years. The annual precision of VIIRS Rrs products showed a declining trend especially in coastal or eutrophic waters. This accuracy deterioration of the VIIRS Rrs products suggests a strong need for continuous monitoring of its performance and further efforts on improving the atmospheric correction algorithm to specifically deal with satellite records at high SZAs and OZAs.

Accurately glacier mapping is crucial for understanding climate change impacts, but existing efforts may be biased due to overlooking spatial autocorrelation during map validation. To address this, we compared several widely used machine learning algorithms as gradient boosting machines (GBM), k-nearest neighbor (KNN) and random forest (RF) with parametric logistic regression (GLM) and an unsupervised remote sensing-based method (NDSI) for mapping Peru's glacier regions in a thoughtful experimental setup. Spatial and non-spatial cross-validation methods were used to evaluate model’s performance and compared with a fully independent test set. Performance differences of up to 18% were found between bias-reduced (spatial) and overoptimistic (non-spatial) cross-validation results when compared to independent test set, emphasizing the need to consider spatial autocorrelation when using machine learning for glacier mapping. K-nearest neighbors (KNN) was the overall best model across regions consistently demonstrating the highest performance followed by logistic regression (LR) and gradient boosting machines (GBM). Our novel validation approach, accounting for spatial characteristics, provides valuable insights for glacier mapping studies and future efforts on glacier retreat monitoring. Incorporating this approach improves the reliability of glacier mapping, guiding future national-level initiatives.

Many of the current strategies for removing pollutants from water are based on nanomaterials and 18nanotechnology. Lower values of Biological Oxygen Demand (BOD5) and Chemical Oxygen De- 19 mand (COD) in water results in reduction in the amount of oxidizable pollutants. We present a study 20 on the reduction of COD and BOD5in water from Wadi El Bey River (Tunisia), using magnetite na- 21 noparticles (MNPs) and magnetic fields. The COD and BOD5 removal reached values higher than 22 50% after 60 min, with optimum efficiency at pH values of ≈8 and for MNPs concentrations of 1 g/L. 23 The use of a permanent magnetic field (0.33 T) showed an increase of COD and BOD5 removal from 2461% to 76% and from 63% to 78%, respectively. This enhancement is discussed in terms of the MNPs 25coagulation induced by the magnetic field and the adsorption of ionic species onto the MNPs sur- 26face due to Fe3O4 affinity.

As major natural disasters in grassland areas, fires and dust events seriously threaten human safety, property, and animal husbandry. Furthermore, these phenomena may be mutually reinforcing, which can lead to more severe cascading disasters. However, few studies have been on the mechanisms of grassland fire and dust events disaster chain. Therefore, we selected Dornod aimag (province), a typical temperate grassland, as the study area and analyzed the spatiotemporal variation patterns of grassland fires and dust weather, as well as the effect of grassland fires on dust weather based on MCD64A1 Burnt Area data and SYNOP dust data. The mechanism of grassland fires on dust weather was further investigated using the MOD13A3 vegetation index product and ERA5 wind speed, wind direction, and precipitation data. The results revealed that grassland fires and dust weather varied spatially across the study area. Furthermore, grassland fires occurred mainly in spring (April to May), summer (June), and autumn (October), while dust weather mainly occurred in spring (March to May). Moreover, autumn, winter, and spring cumulative grassland fires (both days and area) substantially affected the spring total dust weather days and dust storm days, particularly the spring cumulative dust storm days. Additionally, higher precipitation in the summer of 2014 resulted in higher vegetation coverage and more fuel in the autumn and winter of 2014, and even in the spring of 2015. As a result, the cumulative grassland fire days was higher, and the area was larger from September 2014 to April 2015, leading to a considerable increase in the cumulative dust storm days in May 2015. This study has important implications for disaster prevention and mitigation, ecological and environmental protection, and sustainable development in grasslands.

Tropical cyclones (TC) are one of the deadliest natural meteorological hazards and the most frequent cause of natural disasters. The El-Niño Southern Oscillation (ENSO), a tropical ocean-atmosphere interaction, is known to significantly impact cyclonic systems over global ocean basins. This study investigates the variability of TC activity in presence of ENSO over the North Indian Ocean (NIO), comprising of the Arabian Sea (ARB) and the Bay of Bengal (BOB) basins during the pre- and post-monsoon season, using accumulated cyclone energy (ACE) over the last 26 years. Our analysis reveals a significant rise in cyclone intensity over the past two decades, with eight of the ten most active years occurring since the 2000s. Total ACE over the NIO is found to be higher in La-Niña. Higher ACE observed over ARB is strongly associated with a combination of elevated sea surface height (SSH) anomaly and low vertical wind shear during the El-Niño episodes, with higher sea surface temperatures (SST) during the post-monsoon season. Whereas in the BOB, El Niño not only reduces ACE but also decreases basin-wide variability, and more pronounced effect during the post-monsoon season, coinciding with warmer SST and higher SSH along the coast during La-Niña.

Amid urgent global climate and biodiversity crises, the strategic restoration of degraded forests stands as a vital countermeasure. This study pioneers a novel approach for the identification and prioritization of potential degraded forest areas suitable for restoration (PDFR), utilizing the advancements in Earth observation data. Utilizing Landsat data within the Google Earth Engine, our PDFR method applies a nuanced, phenology-based threshold classification to accurately map forest covers at a 30-m resolution, distinguishing prime restoration areas such as evergreen, semi-evergreen, deciduous, and flooded forests, and categorizing them into varying levels of degradation using Siem Reap, a province in Cambodia as a case study. The projections indicate a promising potential for carbon sequestration through restoration of the critically (~96,693 ha), highly (48,878 ha), moderately (46,487 ha), and slightly degraded (75,567 ha) forests, estimating a capture of 193.73 TgCO2 in Siem Reap from 2021 to 2030 upon comprehensive restoration initiatives. As Earth observation technologies continue to evolve, the PDFR method emerges as a strategic blueprint for data-driven policy formulation, fostering sustainable forest management and aligning with the global commitments delineated in the Glasgow Forests Declaration for 2030.

Nowadays, higher education students play an active role in the realization of sustainable development goals (SDGs) for global citizenship. However, some important issues such as how much students know about these goals can play a role in achieving these goals are not yet clear. The aim of this study is to establish a fundamental study for determining the level of knowledge on the higher education students about SDGs. An open-ended questionnaire was conducted with the qualitative research methods on 54 higher education students after pandemic of COVID-19. As a result of the research, the goals of quality education, gender equality, health and quality of life, reduction of inequalities and peace, justice and strong institutions are the most frequently mentioned by the students. In addition, the opinions of the students on the subject of “sustainable cities and communities” are sequentially; the themes include ensuring socio-economic development, preserving cultural heritage identity, safe environment and durable buildings, as well as modern irrigation and waste methods, and reducing air pollution. On the other hand, they agreed on the need for global citizenship to have universal qualifications. In conclusion, global citizenship contributes directly to the SDGs and human-oriented production should be given more importance.

Keywords: Mandra flash flood, soil erosion, slope failure, RES, mitigation measures, landslide susceptibility

In Saudi Arabia’s mountainous regions, debris flow is a natural hazard that poses a threat to in-frastructure and human lives. To assess the potential zones of landslide in the Al-Hada Road ar-ea, a study was conducted using Geographic Information System (GIS) analysis and remote sensing (RS) data. The study took into account various factors that could affect landslide, such as drainage density, elevation, slope, precipitation, land use, geology, soil, and aspect. The study also included a field trip to identify 11 previous landslide events that were influenced by high-density drainage and slope. The study utilized weighted overlay analysis in a GIS environment to create a map indicating the potential landslide zones in the area. According to the analysis, low-risk areas cover 35,354,062.5 square meters, medium-risk areas cover 60,646,250 square meters, and high-risk zones cover an area of 8,633,281 square meters. This result was verified using the locations of previous landslide events. The study’s findings can help planners and decision-makers identify and prioritize areas for mitigation and prevention measures. Additionally, the study contributes to understanding landslide hazards in arid and semi-arid regions.

Bare slope instability is a prevalent concern. The root system of, herbaceous vegetation enhances the shear strength of shallow–slope soil. Indoor experiments were conducted on rootless undisturbed soil (RUS) and undisturbed soil with a root system (USRS) using a triaxial compression apparatus to analyze the slope stability of composite soil with a Tagetes erecta root system. Significance tests and correlation analysis of the factors affecting shear performance were conducted using R software. The slope reinforcement, effect by the plant root system was simulated under 24 working conditions using the MIDAS finite element method. The results revealed the influence of the–root content (RC), moisture content (MC), and stress on the shear strength of USRS, the contribution degree, and the variables’ influences on slope stability. Both RUS and USRS exhibited strain hardening during shearing. The internal friction angle (φ) and cohesion (c) of USRS were negatively and positively correlated with the RC and MC (root burial depth), respectively, and a good fit was obtained for the relationship. The maximum deviatoric stress during shear failure was 1.29 times higher for USRS than for RUS. The RC (root depth) was positively correlated with the slope safety coefficient and the slope of the line under different working conditions, whereas the slope gradient was negatively correlated with the slope safety coefficient. The reinforcement effect by the root system resulted in a 13.2% increase in the safety coefficient and improved stability of slopes with a gradient larger than 1.5%. This article investigated the mechanism of the root–soil system and, the effects of different influencing factors on the shear strength of the soil, and slope stability. The findings provide new insights into shallow slope stability in practical slope protection projects.

Flooding in Nigeria has recently acquired a new dimension and turned into a significant concern in terms of the total amount of property destroyed and the number of people affected. Flooding is one of the top ten natural disasters in the globe. The frequent flooding in Nigeria, which is often related to climate change and poor urban design, is a major worry from the standpoint of the country's development. Flooding and other related threats are becoming more likely to affect infrastructure and population.Neighbourhoods around the nation are increasingly more significantly impacted. Populations and infrastructure are significantly impacted by urban facilities encroaching on floodplains and low implementation of physical planning requirements for floodplain management and waterway development. Because of this, livelihoods are less able to repair after a storm. The nation's rapid urbanisation and population growth have raised the danger of flooding to both people and properties. Critically, a major obstacle to risk control is a lack of understanding of the risk. As a result, there is a significant knowledge vacuum regarding how to improve current efforts to solve the problems caused by Nigeria's floods as efforts to address the threat appear to be limited.

Water conflicts have been a significant issue in Brazil, especially in the Sao Francisco River basin. Subseasonal forecasts, up to a 60-day forecast range, can provide information to support decision-makers in managing water resources in the river basin, especially before drought events. Predictability in the subseasonal forecasts range is a research topic as this range contains mixed dependence on weather and seasonal phenomena. Numerical models may inherit this mixed dependence on their skills. The objective of this paper is to evaluate the Eta Model simulations to reproduce the drought events between the years 2011 and 2016. Two sets of 60-day simulations were produced; one started in September (SO) and the other in January (JF) each year. These months were chosen to evaluate the model skill to reproduce the onset and the middle of the rainy seasons in Central Brazil, where the Upper Sao Francisco River is located. The SO simulations reproduced the observed spatial distribution of precipitation but underestimated the amounts. Precipitation errors exhibit large variability across the subbasins. The JF simulations also reproduced the observed precipitation distribution but overestimated it in the Upper and Lower subbasins. The JF simulations better captured the interannual variability of precipitation. The 60-day simulations were discretized in six 10-day accumulations to assess the intra-monthly variability. They showed that simulations can capture the onset of the rainy season and the small amounts of the rainy months that occurred in these severe drought years.

In this study, we have included the water footprint (WF) in the process of optimising animal feed rations. The global footprint of cattle production accounts for the largest share (33%) of the global water footprint of livestock production. Using two homogeneous groups of Limousine Podolian young bulls, two different diets were compared: corn silage feeding (CSF), with corn silage-based diet; and the triticale silage feeding (TSF), with triticale silage-based diet. Silage constituted about 41% and 46% of the feed composition (for CSF and TSF, respectively). Diets were characterised by the same energy and protein content. Despite the lower WF in the TSF group than in the CSF group (7726 vs 8571 l/day/calf respectively), no significant differences were found in animal performances (i.e., daily weight gain and final weight), feed conversion and income over feed costs. These results show that simple production decisions can have a significant impact on water resource. Therefore, the use of triticale silage should be further promoted, especially in world regions with limited water resources where low WF feed formulation is more strategic than elsewhere.

Constructed wetlands (CWs) is a kind of green environmental protection technology, which is widely used in sewage treatment. The traditional CWs is faced with the problem of low treatment effect of high concentration sewage. In recent years, biochar, as a new type of adsorption material, has been used in CWs because of its advantages of large specific surface area, strong adsorption capacity and wide material sources. This paper systematically summarized the characteristics of biochar and the preparation of biochar by studying the changes of microorganisms added to CWs, and compared the effects of different treatment methods coupled with biochar on the treatment performance of CWs, the effects of biochar coupled with CWs on enzyme activity, functional genes, metabolites and microbial communities were investigated. This review summarizes how different preparation methods affect the properties of biochar and how these biochar cause changes in the microorganisms added to CWs.

Coseismic landslides pose significant threats, causing widespread destruction of buildings, roads, pipelines, and leading to numerous casualties. In recent years, the frequency of earthquakes has increased, prompting a growing interest in regional-scale assessment techniques for coseismic landslides. The infinite slope model proposed by Newmark is widely used to evaluate coseismic landslide hazard. However, the infinite slope model fails to reflect the impact of rock mass structure on the stability of slopes. This paper proposes a novel approach for mapping the hazards of coseismic landslides by considering the roughness of the potential slide surfaces in the inner slope. The proposed method is validated using data from the 2013 Lushan earthquake. The datasets, including geological units, peak ground acceleration (PGA), and high-resolution digital elevation models of topography, are rasterized at a grid spacing of 30 meters. They are then combined within an infinite slope model based on Newmark permanent-deformation analysis, enabling the estimation of coseismic landslide displacement in each grid area resulting from the Lushan earthquake. The modeled displacements are compared with the inventory of landslides triggered by the Lushan earthquake, allowing the derivation of a confidence level function that relates predicted displacement to the spatial variation of coseismic landslides. Ultimately, a hazard map of coseismic landslides is generated based on the established confidence level function. This map serves as a valuable tool for predicting the hazard zone of seismic regions and offers essential insights for decision-making related to infrastructure development and post-earthquake construction.

Puerto Rico is a neotropical island located in the Caribbean. Like other neotropical regions, Puerto Rico streams discharges can vary with the seasons, atmospheric events, and human activities. The Lapa River is part of the Puerto Rico Heritage Rivers Program. This program identifies and manages the protection of hydrographic systems that maintain their natural conditions. The necessity of increasing the knowledge of the natural processes of the Lapa River and providing valuable information for the development of a future management plan for the ecosystem, the following objectives were established in this research: (1) to describe the temporal variations in water discharges in the Lapa River and (2) to describe the impact of atmospheric events on the water discharges at the Lapa River. This study concluded that the highest annual discharge averages recorded from 1989 to 2021 in the Lapa River occurred in 2011 and 2017. 2011, the annual mean discharge was 31.20 (ft3/s); in 2017, the average was 40.44 (ft3/s). In terms of atmospheric events, this study concludes that, during the evaluated period, the highest discharge event occurred after the impact of hurricanes Irma and Maria, with an average discharge of 164.40 ft3/s in October and 182.60 ft3/s in September. This event set a precedent in the river Lapa’s discharges, impacting the river basin’s flora, fauna, and morphology from its headwaters downstream.

The paper presents the results of geological interpretation of the set of geophysical data with substantiation of geological-geophysical and structural geological criteria of oil and gas potential of the sedimentary cover deep levels and the upper part of the consolidated basement in the central West Siberian oil and gas basin. Gravity, magnetic and seismic data are used. The character of manifestation of the regional Pai-Khoi–Altai strike-slip zone covering an area up to 200 km wide is shown. The study provides a basis for assuming a spatial genetic relationship between the conditions for localizing hydrocarbon traps and the extensional and strike-slip and thrust structures of the zone that form so-called "flower structures". The substantiated structural geological criteria were applied to solve the problem of pattern recognition with training, highlighting the environments favourable for localization of hydrocarbon fields.

Rapid urbanization has led to many ecological problems such as landscape fragmentation, decreased landscape connectivity, and decreased biodiversity. Building an ecological security pattern is an important way to ensure ecological security and maintain sustainable urban development. Harbin is an important large-scale city in northeastern China, and the urban central district of Harbin is used as the study area. Ecological sensitivity assessment, MSPA, gravity model, landscape connectivity assessment and MCR model were used to extract ecological source areas, ecological corridors and ecological nodes in the study area to construct and optimize the ecological security pattern. Research shows that: A total of 23 ecological source areas were identified, mainly located along the Songhua River in the central part of the study area and in the mountain forest areas within the A-cheng District in the southeastern part of the study area. 48 ecological corridors were extracted, mainly in Daowai District, A-cheng District and the eastern part of Xiangfang District. There are 8 important ecological corridors and 10 important connecting corridors. 61 ecological nodes of the first level and 65 ecological nodes of the second level were extracted. High, higher, medium, lower and low security areas were classified based on the minimum cumulative resistance surface, with the highest proportion of high ecological security areas accounting for 45.75% of the study area. 65 ecological breakpoints were extracted and restoration measures were proposed. Finally, The structure of the ecological security pattern optimization of "two axes, two belts and four areas" is proposed, and corresponding ecological management measures are put forward. The experimental system of this study can provide new ideas for the construction of ecological security patterns in other regions and provide scientific support for the ecological sustainable development of similar urban areas.

Central Asian countries are the core area of the Belt and Road Initiative (BRI). However, as part of the former Soviet Union, we know very little about the urbanization processes in these countries after the collapse of the Soviet Union. Here, were used land-cover type data, vegetation index data, and grided population data to quantify the urban expansion, urban population changes, and urban environment changes across cities in Central Asia from 2000 to 2020, and took Xinjiang, China as a reference. We found that the urbanization in the study area was uneven. Specifically, the urban expansion in Xinjiang, China and Kazakhstan was faster than in the other countries in the study area. Due to rapid urban expansion, the urban population density in Xinjiang, China decreased from 2000 to 2020, but rapid urban population growth was maintained. Consequently, the pressure of the urban population growth in Xinjiang, China was less than that in the other countries of Central Asia. On average, more than 35% of the urban built-up areas underwent significant greening in Xinjiang, China and more than 3.63 million residents directly benefited from the increase in urban greenness. Although the urban greenness in Xinjiang increased significantly, the overall greenness was still lower than in most cities in Central Asia. In the future, the cities in Xinjiang, China should continue to promote the construction of urban ecological civilization and strengthen their role as a link in the Belt and Road Initiative.

The spatial and temporal changes in social vulnerability to natural hazards in Mexico are analyzed. To this end, using census data from 2000, 2010, and 2020 and a statistical method, different indices were computed, and with a GIS-based approach, patterns of social vulnerability are examined. In addition, a risk assessment test for severe weather (thunderstorms, hailstorms, and tornadoes) is made out. The results show different common social vulnerability driving factors in the three analyzed years, with root causes that have not been addressed since the beginning of the century. Likewise, a wider gap between Mexico's most and least vulnerable populations is identified. The changes in spatial patterns respond to different historical situations, such as migration, urbanization, and increased population. Also, poverty, ethnicity, and marginalization factors located in very particular regions in Mexico have remained relatively the same in the last few years. These situations have strongly influenced the spatial-temporal distribution of vulnerability in the country. The role of social vulnerability in the disaster risk to extreme events such as thunderstorms, hailstorms, and tornadoes in Mexico is fundamental to understanding changes in disaster distribution at the national level, and it is the first step to generating improvements in integrated risk management.

China is striving to leverage the power of science and technology to green its agriculture while increasing grain productivity. In this context, this study presents the green growth rate of agriculture from the DEA-based Green Total Factor Productivity (GTFP) indicator, together with the growth rate of grain yields, and applies it to the case of Jiangsu, a major grain-producing province with a well-developed economy. It is found that Jiangsu's agriculture has generally performed well in the implementation of the two major national strategies of green development and grain security, especially in the northern Jiangsu, which is a major grain-producing area. In contrast, the phased fluctuations of green growth in agriculture in Southern Jiangsu are more pronounced, with even negative green growth occurring during the green agriculture movement. Much of the volatility in agricultural green growth at the provincial, subregional, municipal level comes from the effects of the movement of the green technology frontier led by best practitioners. Accordingly, the possibility of improving the weak state of the catch-up effect on green growth is explored from the perspective of the Chinese government-led agricultural science and innovation system; it also traces the green agricultural initiatives in the main grain-marketing areas that have failed to deliver the expected green growth, and recommends a review of such policies and refinement of the GTFP Index tool for assessing sustainable green growth.

Saudi Arabia consists mainly of desert land. However, it has big and small natural wetlands and artificial wetlands. Most of these wetlands are seen along the Red Sea and the Arabian Gulf coastal regions. Al-Asfar Lake, located in the Eastern Region of Saudi Arabia, is one of the historical landmarks of Al-Ahsa province. The primary lake water source is agricultural drainage water, which some refer to as an artificial lake. This paper mainly aims to reflect shade on the wetlands in Saudi Arabia in general and to show in detail the environmental impacts of Al-Asfar Lake on the ecosystem and biodiversity of the study area. The analytical review of the previous studies conducted in Al-Asfar Lake was adopted in this article. Hence, the impact of the lake on the land-use system, water quality and biodiversity was illustrated as the main outputs of the review analysis. However, the sustainable management of Al-Asfar Lake requires the stakeholders to adopt the wetland ecosystem health concept, which might lead to improving the lake's environmental conditions.

Soil resilience has become a central theme in research aimed at understanding the impacts of human activities on the environment and mitigating the negative effects of soil disturbance. To evaluate how soil management practices affect soil resilience, 26 small farms were studied in a mountainous district of Lebanon. Farms were categorized into conventional (C), neutral (N), and regenerative (R), based on the practices adopted including tillage, amendments, rotation, cover crops, residues management, and pest control. Common practices included intercropping (85%), residue retention (73%), cover crops (61%), and organic amendments (46%). Qualitative assessment of soil health used indicators from Latin American Society for Agroecology (SOCLA) as well as from ‘Tool for Agroecological Performance Evaluation’ of the FAO. The indicators aligned with the classification of farms into their respective C/N/R groups. The sustainability scores were 4.28 (Low) for conventional, 6.34 (Moderate) for neutral, and 7.88 (Good) for regenerative farms. Quantitative analysis determined for 15 selected farms showed significant differences in soil organic matter (1.86% C, 2.75% N, 3.32% R), soil respiration (156C, 296N, 380R mg C-CO₂. week⁻¹), and earthworm abundance/liter (2.92C, 4.24N, 5.72R). The Soil Quality Index (SQI) provided an accurate representation of the current soil health condition, with increment from 0.05, 0.27 (low), to 0.49 (good) in conventional, neutral, and regenerative farms, respectively. The research highlights that soil resilience is influenced by a combination of intricate factors, encompassing biotic interactions, as well as physical, chemical, and biological processes. Particularly in regions like the Mediterranean basin, adopting sustainable soil management practices contributes to enduring productivity while preserving the functional integrity and resilience characteristics of the soil.

In this study, seventeen faceted gem-quality chrysoberyls exhibiting an attractive canary yellow color were investigated by a series of gemological, spectral, and chemical methods. Microscopic observation reveals distinct growth lines and inclusions, including CO2 fluids, carbon, and mineral crystals such as calcite, quartz, sillimanite, and mica, identified by the Raman spectrum. The FTIR spectrum exhibits the 2405 and 2160 cm-1 feature peaks and a 3223 cm-1 peak in all samples, which can be accompanied by the 3112 cm-1 shoulder, 3301, and 3412 and 3432 cm-1 peaks. The UV-Vis spectrum shows a Fe-related peak at 440 nm, along with the 650–660 nm band and the absorption band in the blue zone of the visible light. The chemical results of EDXRF reveal a V-poor, Cr-poor, and Fe-rich feature. The spectral and chemical results could contribute to explaining the origin of the canary yellow color, which originates from the abundant amount of Fe with very little influence from Cr or V.

The aim of this research is to investigate and use a variety of immersive multisensory media techniques in order to create convincing digital models of fossilised tree trunks for use in XR. This is made possible via the use of geospatial data derived from sources such as aerial imaging using UAS, terrestrial material using cameras and also include both the visual and audio element for better immersion, accessible and explorable in 6 Degrees of Freedom (6DoF). Immersiveness is a key factor in order to result in output that is especially engaging to the user. Both conventional and alternative methods are explored and compared, emphasising in the advantages made possible via the help of Machine Learning Computational Photography. Material is collected using both UAS and terrestrial camera devices, including a 3D-360º camera with 6 sensors, using stitched panoramas as sources for photogrammetry processing. Difficulties such as capturing large free standing objects using terrestrial means were overcome using practical solutions involving mounts and remote streaming solutions. Conclusions indicated that superior fidelity can be achieved by the help of Machine Learning Computational Photography processes and higher resolutions and technical specs of equipment not necessarily translating to superior outputs.