This study aims to assess the potential of the LDAS-Monde a land data assimilation system developed by Météo-France to monitor the impact of the 2018 summer heatwave over western Europe vegetation state. The LDAS-Monde is forced by the ECMWF’s (i) ERA5 reanalysis, and (ii) the Integrated Forecasting System High Resolution operational analysis (IFS-HRES), used in conjunction with the assimilation of Copernicus Global Land Service (CGLS) satellite derived products, namely the Surface Soil Moisture (SSM) and the Leaf Area Index (LAI). Analysis of long time series of satellite derived CGLS LAI (2000-2018) and SSM (2008-2018) highlights marked negative anomalies for July 2018 affecting large areas of North Western Europe and reflects the impact of the heatwave. Such large anomalies spreading over a large part of the considered domain have never been observed in the LAI product over this 18-yr period. The LDAS-Monde land surface reanalyses were produced at spatial resolutions of 0.25°x0.25° (January 2008 to October 2018) and 0.10°x0.10° (April 2016 to December 2018). Both configuration of the LDAS-Monde forced by either ERA5 or HRES capture well the vegetation state in general and for this specific event, with HRES configuration exhibiting better monitoring skills than ERA5 configuration. The consistency of ERA5 and IFS HRES driven simulations over the common period (April 2016 to October 2018) allowed to disentangle and appreciate the origin of improvements observed between the ERA5 and HRES. Another experiment, down-scaling ERA5 to HRES spatial resolutions, was performed. Results suggest that land surface spatial resolution is key (e.g. associated to a better representation of the land cover, topography) and using HRES forcing still enhance the skill. While there are advantages in using HRES, there is added value in down-scaling ERA5, which can provide consistent, long term, high resolution land reanalysis. If the improvement from LDAS-Monde analysis on control variables (soil moisture from layers 2 to 8 of the model representing the first meter of soil and LAI) from the assimilation of SSM and LAI was expected, other model variables benefit from the assimilation through biophysical processes and feedbacks in the model. Finally, we also found added value of initializing 8-day land surface HRES driven forecasts from LDAS-Monde analysis when compared with model only initial conditions.

One of the most destructive natural disasters is the earthquake which brings enormous risks to humankind. The objective of the current study was to determine the Earthquake’s remote sensing multiparameter (i.e. land surface temperature (LST), air temperature, specific humidity, precipitation and wind speed) spatiotemporal anomaly of many earthquake samples occurred during 2018 around the world. In this research 11 earthquake (M > 6:0) studied (4 samples selected in a land with transparent sky situations, 3 samples in land within cloudy situations and 4 samples in marine earthquakes). The interquartile range (IQR) and mean ± 2σ methods utilized to improve the efficiency of anomalous differences. As a result, based on the IQR method, negative anomaly before the event detected during the daytime in Mexico and during the nighttime in Afghanistan. In addition, a negative outlier of brightness temperature (BT) detected in Alaska before, after and during the event. In contrast, based on IQR and mean ± 2σ positive anomaly detected in precipitation before and after the event in all investigated examples. According to mean ± 2σ, negative anomaly LST, specific humidity, sea surface temperature (SST_100) and wind detected in most examined earthquake samples. In contrast, positive SST_0 anomaly observed in Fiji and Honduras after the earthquake. Our results suggested in marine earthquakes, for earthquake forecasting we can merge a prior negative anomaly in the wind speed and SST_100. Regarding the in land cloudy sky earthquakes, merging anomaly parameters could be the negative prior anomaly in BT, skin temperature, in contrast, a positive anomaly in precipitation. In land transparent sky earthquake, usually negative prior anomalies in air temperature, specific humidity and LST.

Groundwater plays a pivotal role as the largest potable water sources in Bangladesh. However, the quality of the groundwater faces challenges due to xenobiotic compounds in it. Excess amount of arsenic (As) has already been found in groundwater in many parts of Bangladesh. Thus, this study was conducted to assess the water quality and associated human health risk in central Bangladesh. A total of 99 groundwater samples from the central part of Bangladesh were analyzed to assess human health risk due to high level of nitrate (NO3-) and other trace elements i.e. arsenic (As), iron (Fe), and manganese (Mn). It was found that NO3- concentration (253.17 mg/L) in the groundwater samples exceeds the recommended guideline value by the WHO (50 mg/L). Moreover, this study area also characterized with elevated concentration of As (19.44 µg/L), Fe (811.35 µg/L), and Mn (455.18 µg/L) in the groundwater. Non-carcinogenic human health risk was calculated by justifying HQ (Hazard Quotient) and HI (Hazard Index) and attributed potential conjunctive human health risks due to NO3-, As, Fe and Mn in the study area. Moreover, high carcinogenic risk was found due to As contamination in the groundwater samples in the study area.

Increasing salt intake has substantial negative impacts on health and well-being. This review article focusses on the effect of salinity intrusion (SI) on the water quality and community health of coastal Bangladesh and to find out the effectiveness of interventions for reducing the negative effects of salinity. Saline water is a noteworthy reason for hypertension or high blood pressure in the coastal areas. Health status of women especially the pregnant women are vulnerable because of drinking water sodium (DWS) prompting to pre-eclampsia, high blood pressure and hypertension as well as infant mortality. Several interventions such as rainwater harvesting and Pond sand filter (PSF) system as well as managed aquifer recharge (MAR) usage and the integration of mixed sources were reviewed on the content of drinking water sodium (DWS). Although rainwater has the positive impact of low or no sodium intake on human health, it still possesses negative impacts from not having vital minerals. Despite what might be expected, in MAR a steady increment in sodium concentration through the span of the dry season was observed. It is, subsequently, important to increase awareness about drinking water sodium (DWS) intake by providing and adopting correct technological interventions.

Delineating the cropping area of cocoa agroforests is a major challenge for quantifying the contribution of the land use expansion to tropical deforestation. Discriminating cocoa agroforests from tropical transition forests using multi-spectral optical images is difficult due to a similarity in the spectral characteristics of their canopy; moreover, optical sensors are largely impeded by the frequent cloud cover in the tropics. This study explores multi-season Sentinel-1 C-band SAR image to discriminate cocoa agroforests from transition forests for a heterogeneous landscape in central Cameroon. We use an ensemble classifier, random forest, to average SAR image texture features of GLCM (Grey Level Co-occurrence Matrix) across seasons; next, we compare classification performance with results from RapidEye optical data. Moreover, we assess the performance of GLCM texture feature extraction at four different grey level quantization: 32bits, 8bits, 6bits, and 4bits. The classification overall accuracy (OA) of texture-based maps outperformed that from an optical image; the highest OA of 88.8% was recorded at 6bits grey level. This quantization level, in comparison to the initial 32bits in SAR images, reduced the class prediction error by 2.9%. Although this prediction gain may be large for the landscape area, the resultant thematic map reveals the decrease and fragmentation of forest cover by cocoa agroforests. According to our classification validation, the Shannon entropy (H) or uncertainty provides a reliable validation for class predictions and reveals detail inference for discriminating inherently heterogeneous vegetation categories. The texture-based classification achieved a reliable accuracy considering the heterogeneity of the landscape and vegetation classes.

The Convective Rainfall Rate from Cloud Physical Properties (CRPh) for Meteosat Second Generation Satellites is a day-only precipitation algorithm developed at the Spanish Meteorological Agency (AEMET) for EUMETSAT’ Satellite Application Facility in support to Nowcasting and Very Short Range Forecasting (NWC SAF). It is therefore mainly intended to provide input for monitoring and near-real-time forecasts for the next few hours. This paper critically discusses the theoretical basis of the algorithm with special emphasis in the empirical values and assumptions in the microphysics of precipitation and compares the performances of the CRPh with its antecessor, the Convective Rainfall Rate algorithm (CRR), using an object-based method. The analyses show that AEMET’s CRPh is physically consistent and that outperforms the CRR. The applicability of the algorithm for nowcasting and the challenges to evolve the product to an all-day algorithm are also presented.

The Upper Jurassic (Oxfordian Age) Smackover Formation is a significant source for hydrocarbon production in southwest Alabama. Brooklyn Field is in southeast Conecuh County, Alabama and has been a major producer of oil and natural gas for the state. The Smackover is a carbonate formation that is divided into seven distinct lithofacies. In southwest Alabama, the Smackover Formation is heavily influenced by paleotopography from the underlying Paleozoic rocks of the Appalachian system. The goal of this study is to determine elemental ratios in rock core within the Smackover Formation using a X-ray fluorescence (XRF) handheld scanner, to correlate between lithofacies in the Smackover Formation and elementally characterize the upper oolitic grainstone reservoir and the lower thrombolite boundstone. Eight wells were used for the study within Brooklyn Field and Little Cedar Creek fields. Cores from the eight wells were scanned on six-inch intervals. Chemical logs were produced to show elemental weights in relation to depth and lithofacies. Well data collected for chemical signatures within producing zones were correlated to reservoir lithofacies and porosity. Aluminum, silicon, calcium, titanium, and iron were the most significant (>95% confidence level) predictors of porosity and is related to the depositional environment and subsequent diageneses of the strata. XRF data suggests relative enrichments in iron, titanium, and potassium may be related to deposition in relatively restricted marine waters.

The main objective of this study is to search better prediction result of rainy seasonal rainfall (15 June-15 August). A correlation between rainfall of Bengali rainy seasons at Rangpur, Dhaka, Barisal and Sylhet and global sea surface temperature (SST) of different areas of the world was studied by using the both data of 1975- 2008 years with the help of the Climate Predictability Tool (CPT) to find more positive correlated SST with observed rainfall and use as predictor for giving the prediction of the year 2009. Using SST of one month before rainy season as predictor, the positive deviation of predicted rainfall from observed rainfall was 1.34 mm/day at Sylhet and 0.9 mm/day at Dhaka. The negative deviation of mean rainfall was 1.16 mm/day at Rangpur and 1.10 mm/day at Barisal. Again, using of starting one month SST of rainy season as predictor, positive deviation of predicted rainfall from observed rainfall was 4.03 mm/day at Sylhet. The positive deviation of daily mean rainfall was found 6.58 mm/day at Dhaka and 6.23 mm/day over southern Bangladesh. The study reveals that sea surface temperature (SST) of one month before rainy season was better predictor than SST of starting month of rainy season.

A study of the water quality of the Adolfo López Mateos Reservoir (ALMD) was developed through different indicators from a spatial and seasonal perspective. Variables related to the general characteristics of water quality, trophic level and ecological risk were assessed through the water Quality Index (WQI_NSF-BROWN), Trophic State Index (TSI_CARLSON) and the Ecological Risk Index (RI_HAKANSON). Using data from physical, chemical and biological parameters obtained from four sampling points in the ALMD, the water quality was assessed in each model used. The results indicated that the reservoir presents a water quality classified as “medium” (WQI_NSF-BROWN = 70), where significant variations in the concentrations of some parameters are observed. The reservoir showed a general trophic state classified as “Mesotrophic” (TSI_{GENERAL-AVERAGE} = 43.04). The ecological risk analysis achieved the best classification of the methodology, discarding contamination by heavy metals in surface waters. Through this type of applied methodologies will help as decision making tools in the dam, as well as for application in other dams in the region.

LULC changes are major environmental challenges in many parts of the world which are adversely affecting ecosystem services. This study was aimed to analyze LULC changes in the ecological landscape of Ethiopia CRV areas from 1985 to 2015. Satellite images were accessed and pre-processing and classification is done. Major LULC types were detected and change analysis was executed. Nine LULC changes were successfully evaluated. The classification result revealed that in 1985, 44.34% of the land was covered with small scale farming followed by mixed cultivated/acacia (21.89%), open woodland (11.96%), and water bodies (9.77%). Whereas for the same study year open grazing land, forest, degraded savannah and settlements accounted the smallest proportion. Though the area varied among land use classes, the trend of share occupied by the LULC types in the study area remained the same in 1995 and 2015. Increase in small and large scale farming, settlements and mixed cultivation/acacia while a decrease in water bodies, forest, and open woodlands is noted. About 86.11% of the land showed major changes in land use/cover. Lastly, DPSIR framework analysis was done and integrated land use and development planning and policy reform are suggested for sustainable land use planning and management.

This study was undertaken to derive and analyze the Advanced Microwave Scanning Radiometer - EOS (AMSR-E) sea surface temperature (SST) footprint associated with the Remote Sensing Systems (RSS) Level-2 (L2) product. The footprint, in this case, is characterized by the weight attributed to each 4  4 km square contributing to the SST value of a given AMSR-E pixel. High-resolution L2 SST fields obtained from the MODerate-resolution Imaging Spectroradiometer (MODIS), carried on the same spacecraft as AMSR-E, are used as the sub-resolution “ground truth“ from which the AMSR-E footprint is determined. Mathematically, the approach is equivalent to a linear inversion problem, and its solution is pursued by means of a constrained least square approximation based on the bootstrap sampling procedure. The method yielded an elliptic-like Gaussian kernel with an aspect ratio  1.58, very close to the AMSR-E 6.93GHz channel aspect ratio,  1.7. (The 6.93GHz channel is the primary spectral frequency used to determine SST.) The semi-major axis of the estimated footprint is found to be alignedwith the instantaneous field-of-view of the sensor as expected fromthe geometric characteristics of AMSR-E. Footprintswere also analyzed year-by-year and as a function of latitude and found to be stable – no dependence on latitude or on time. Precise knowledge of the footprint is central for any satellite-derived product characterization and, in particular, for efforts to deconvolve the heavily oversampled AMSR-E SST fields and for studies devoted to product validation and comparison. A preliminarly analysis suggests that use of the derived footprint will reduce the variance between AMSR-E and MODIS fields compared to the results obtained.

Climate change represents a major threat to lotic freshwater ecosystems and their ability to support the provision of ecosystem services. England’s chalk streams are in a poor state of health, with significant concerns regarding their resilience, the ability to adapt, under a changing climate. This paper aims to quantify the effect of climate change on hydroecological response, the health of the river, for the River Nar, a SSSI in the south-east of England. To this end, we apply a coupled hydrological and hydroecological modelling framework, with the UKCP09 probabilistic climate projections serving as input (A1B high emissions scenario). Results show that, from 2021 to the end of the century, hydroecological response becomes more heterogeneous. Despite the limited range of the functional feeding groups on the baseline, the River Nar has been able to adapt to extreme events due to inter-annual variation. In the future, this variation is greatly reduced, raising real concerns over the resilience of the river ecosystem under climate change. These new insights into the health of the River Nar, and chalk streams more generally, highlights the necessity of further study and the real need to for changed river management practices.

Tree condition, pruning and orchard management practices within intensive horticultural tree crop systems can be determined via measurements of tree structure. Multi-spectral imagery acquired from an unmanned aerial system (UAS) has been demonstrated as an accurate and efficient platform for measuring various tree structural attributes, but research in complex horticultural environments has been limited. This research established a methodology for accurately estimating tree crown height, extent, plant projective cover (PPC) and condition of avocado tree crops, from a UAS platform. Individual tree crowns were delineated using object-based image analysis. In comparison to field measured canopy heights, an image-derived canopy height model provided a coefficient of determination (R2) of 0.65 and relative root mean squared error of 6%. Tree crown length perpendicular to the hedgerow was accurately mapped. PPC was measured using spectral and textural image information and produced an R2 value of 0.62 against field data. A random forest classifier was applied to assign tree condition into four categories in accordance with industry standards, producing out-of-bag accuracies >96%. Our results demonstrate the potential of UAS-based mapping for the provision of information to support the horticulture industry and facilitate orchard-based assessment and management.

The objective of this work is to evaluate the impact of the innovative modifications made to the conventional effluent capture and discharge devices used in subsurface flow wetlands (SSFW). The main modifications developed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. This improved innovative device was applied and evaluated in two subsurface flow wetlands, one on a pilot scale and one on a real scale. To evaluate the impact of the innovative device with respect to conventional one in the operational functioning of subsurface flow wetlands, the elimination of chemical oxygen demand was measured and compared. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device, confirming the validity and effectiveness of the modifications implemented in the effluent capture and discharge devices used in SSFW.

Mapping settlement extents at the annual time step has a wide variety of applications in demography, public health, sustainable development, and many other fields. Recently, while more multitemporal urban feature or human settlement datasets have become available, issues still exist in remotely-sensed imagery due to coverage, adverse atmospheric conditions, and expenses involved in producing such feature sets. These challenges make it difficult to increase temporal coverage while maintaining high fidelity in the spatial resolution. Here we demonstrate an interpolative and flexible modeling framework for producing annual built-settlement extents. We use a combined technique of random forest and spatio-temporal dasymetric modeling with open source subnational data to produce annual 100m x 100m resolution binary settlement maps in four test countries of varying environmental and developmental contexts for test periods of five-year gaps. We find that in the majority of years, across all study areas, the model correctly identified between 85-99% of pixels that transition to built-settlement. Additionally, with few exceptions, the model substantially out performed a model that gave every pixel equal chance of transitioning to the category “built” in each year. This modelling framework shows strong promise for filling gaps in cross-sectional urban feature datasets derived from remotely-sensed imagery, provide a base upon which to create future built/settlement extent projections, and further explore the relationships between built area and population dynamics.

Due to the increasing importance of mangroves in climate change mitigation projects, more accurate and cost-effective aboveground biomass (AGB) monitoring methods are required. However, field measurement of AGB may be a challenge because of its remote location and the difficulty to walk in these areas. This study is based on the Livelihoods Fund’ Oceanium project of 10,000 hectare mangrove plantations monitoring. In a first step, the possibility of replacing traditional field measurements of sample plots in a young mangrove plantation by a semiautomatic processing of UAV-based photogrammetric point clouds was assessed. In a second step, Sentinel-1 radar and Sentinel-2 optical imagery were used as auxiliary information to estimate AGB and its variance for the entire study area under a model-assisted framework. AGB was measured using UAV imagery in a total of 95 sample plots. UAV plot data was used in combination with non-parametric Support Vector Regression (SVR) models for the estimation of the study area AGB using model-assisted estimators. Purely UAV-based AGB estimates and their associated standard error (SE) were compared with model-assisted estimates using (1) Sentinel-1, (2) Sentinel-2 and (3) a combination of Sentinel-1 and Sentinel-2 data as auxiliary information. The validation of the UAV-based individual tree height and crown diameter measurements showed a root mean square error (RMSE) of 0.21 m and 0.32 m respectively. Relative efficiency of the three model-assisted scenarios ranged between 1.61 and 2.15. Although all SVR models improved the efficiency of the monitoring over UAV-based estimates, the best results were achieved when a combination of Sentinel-1 and Sentinel-2 data was used. Results indicated that the methodology used in this research can provide accurate and cost-effective estimates of AGB in mangrove young plantations.

The objective of this work is to evaluate the impact of the innovative modifications made to the conventional effluent capture and discharge devices used in subsurface flow wetlands (SSFW). The main modifications developed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. This improved innovative device was applied and evaluated in two subsurface flow wetlands, one on a pilot scale and one on a real scale. To evaluate the impact of the innovative device with respect to conventional one in the operational functioning of subsurface flow wetlands, the elimination of chemical oxygen demand was measured and compared. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device, confirming the validity and effectiveness of the modifications implemented in the effluent capture and discharge devices used in SSFW.

Yogyakarta City is one of the big city which is located in Java Island, Indonesia. Yogyakarta City, including study area (Pleret Sub District), are very prone to earthquake hazards, because close to several active earthquake sources. For example, Sunda Megathrust which often generates a big earthquake which can affect the study area. The Sunda Megathrust extends from north to south and west to east along the Sumatra and Java Islands. Furthermore, an active normal fault called as Opak Fault pass through right in the middle of Study area and divides the study area into east and west zone. Recently, after the devastating earthquake in 2006, the population of the study area increases significantly. As a result, the housing demand is also increasing. However, due to the absence of earthquake building code in the study area, locals tend to build improper new houses. Furthermore, in some part of the mountainous area in the study area, there are some building found in unstable slopes area. Due to this condition, the multi-hazard and risk study needs to be done in Pleret. The increasing of population and improper houses in Pleret Sub-District can lead to amplify the impact. Thus, the main objective of this study is to assess the multi-hazards and risk of earthquake and other related secondary hazards such as ground amplification, liquefaction, and coseismic landslide. The method mainly utilised the geographic information system, remote sensing and was fit up by the outcrop study. The results show that the middle part of the study area has a complex geological structure. It was indicated by a lot of unchartered faults was found in the outcrops. Furthermore, the relatively prone areas to earthquake can be determined. In term of the coseismic landslide, the prone area to the coseismic landslide is located in the east part of the study area in the middle slope of Baturagung Escarpment. The highly potential area of liquefaction is dominated in the central part of the study area. In term of building collapsed probability, the result shows that the safest house based on statistical analysis is the residential house with the building attribute of wood structure, roof cast material, distance more than 15 km from the earthquake source, and located above the Nglanggran Formation. Finally, the multi-hazard and risk analysis show that the middle part of the study area is more vulnerable than the other part of Pleret Sub-District.

Electric and/or magnetic fields are generated by stationary charges, uniformly moving charges and accelerating charges. These field components are described in the literature as static fields, velocity fields (or generalized Coulomb field) and radiation fields (or acceleration fields), respectively. In the literature, the electromagnetic fields generated by lightning return strokes are presented using the field components associated with short dipoles and in this description the one to one association of the electromagnetic field terms with the physical process that gives rise to them is lost. In this paper, we will derive expressions for the electromagnetic fields using field equations associated with accelerating (and moving) charges and separate the resulting fields into static, velocity and radiation fields. The results illustrates how the radiation fields emanating from the lightning channel give rise to field terms varying as inverse of distance and distance squired, the velocity fields generating field terms varying as inverse of distance squired and the static fields generating fields components varying as inverse of distance squired and distance cube. These field components depend explicitly on the speed of propagation of the current pulse. However, the total field does not depend explicitly on the speed of propagation of the current pulse. It is shown that these field components can be combined to generate the field components pertinent to the dipole technique. However, in this conversion process the connection of the field components to the physical process taking place at the source that generate these fields (i.e. static charges, uniformly moving charges and accelerating charges) is lost.

Threats to natural ecosystems are closely linked to human development, and the lack, insufficiency or inefficiency of public policies are some of the most important drivers of negative effects on the environment. The contribution of the IUCN’s Red List of Ecosystems (RLE) to conservation topics has been discussed in previous studies; however, to date its implications for conservation in public policies have not been addressed. This perspective discusses how the RLE may support the improvement and development of these policies, specifically through the implications for public policy of each of the criteria that substantiate the threat status of ecosystems. We aim to provide a plausible baseline to the operationalization of RLE in public and conservation policy, facilitating the work of governments, practitioners and decision makers. Finally, we provide recommendations and examples as to how to proceed in creating and modifying different public policy instruments, such as land-use planning, spatial zoning, tax reduction, compensation schemes, climate change adaptation plans, management of introduced species, development offsets and restoration investment. This perspective contributes to implement RLE into public policy and to improve ecosystem conservation by expanding the current scope of RLE into practical and political dimensions through plausible actions, policies and strategies.

The research carried out concerned the laboratory assessment of the applicability of the Crop Water Stress Index (CWSI) as a practical tool for assessing the risk of desiccation for selected wetland habitats: transition mires and quaking bogs as well as alkaline fens. The analysis was carried out on 3 soil samples with a vegetation cover (with the dimensions of 40×40×30 cm) collected during the full vegetation season for each mentioned habitat, with a characteristic species composition. Experimental research was carried out between 17^th May 2018 and 19^th June 2018. Thermal, RGB and multispectral images, chlorophyll content, volumetric soil moisture, air temperature and relative humidity measurements were taken for each sample every two days. The obtained results clearly indicate the dependence between CWSI and plant condition parameters in the first phase of desiccation. At the same time, as a result of the observations taken, thresholds have been set, indicating different desiccation phases.

Since the 1970s, land subsidence has been developing rapidly in the Beijing Plain, the systematic study of its evolution mechanism is of great significance to the sustainable development of the regional economy. First, based on ENVISAT ASAT and RADARSAT2 data, the land subsidence data in Beijing Plain were obtained using permanent interferometer technology. Second, based on the GIS platform and using fishing net tools, vector data of ground settlement with different resolutions were obtained. Through a series of tests, a scale of 960 metres was selected as the research unit, and the subsidence rate of the grid was obtained from 2004 to 2015. Finally, based on the Mann-Kendall mutation test method, a trend analysis of land subsidence changes in various grids was carried out. The results showed that single-year mutation mainly distributed in the middle and lower parts of the Yongding River alluvial fan and the Chaobai River alluvial fan, mainly occurring in 2015, 2005 and 2013, respectively. The upper and middle alluvial fan of the Chaobai River, the vicinity of the emergency water source and the edge velocity of the groundwater funnel have undergone several sudden changes. Combined with hydrogeology, basic geological conditions and the impact of the South-to-North Water transfer project, we analysed the causes of the mutations in the grid. The research results can provide a basis for the study and prevention of land subsidence in this area and help to further explore the trend characteristics of land subsidence in this area.

The UK food industry faces significant challenges to remain sustainable. With major challenges such as Brexit on the horizon, companies can no longer rely on a low labour cost workforce to maintain low production costs and achieve economic sustainability. Smart Systems (SS) is being seen as an approach towards achieving significant improvements in both economic and environmental sustainability. However, there is little evidence to indicate whether UK food companies are prepared for the implementation of such systems. The purpose of this research is to explore the applicability of Smart Systems in UK food manufacturing companies and, to identify the key priority areas and improvement levers for the implementation of such systems. A triangulated primary research approach is adopted and includes a questionnaire, follow up interviews and visits to thirty-two food manufacturing companies in the UK. The questionnaire and interviews are guided by the development of a unique measuring instrument created by the authors that is focusses upon SS technologies and systems. This paper makes an original contribution in that it is one of few academic studies to explore the implementation of SS in the industry and, provides a new perspective on the key drivers and inhibitors around its implementation. Findings suggest that the current turbulence in the industry could be bringing food companies closer to the adoption of such systems, hence it is a good time to define and develop the optimum SS implementation strategy.

Unsteady flow is the most common and complicated form of fluid motion in nature. This paper takes the beaches of key waterways in the middle and lower reaches of the Yangtze River as the research object, analyzes the water surface distribution and average flow velocity distribution near the beach, and analyzes the differences. The relationship between the flow pattern of the steep slope and the water flow pattern of the entire survey area and the steep slope of the beach and its nearby water flow structure. The water flow near the beach is divided into four major blocks: the swelling water area, the falling water area, the backwater area and the maximum flow rate area. The water flow structure characteristics and the cause of each block are analyzed.

In 2014, the International Union for Conservation of Nature adopted the Red List of Ecosystems (IUCN RLE) criteria as the global standard for assessing risks to terrestrial, marine, and freshwater ecosystems. Identifying and quantifying the impacts of biodiversity assessments on the status of nature is key to justifying continued investment in assessments and enabling strategic planning to maximize future impact. In this policy perspective, we use an established impact evaluation framework to identify the impacts of the IUCN RLE since its inception. To date, 1,397 ecosystem units in 100 countries have been assessed following the IUCN RLE protocol. Systematic assessments are complete or underway in more than 25 countries and two continental regions (the Americas and Europe). Countries with established ecosystem red lists have already used them to inform legislation, land-use planning, protected area expansion, monitoring and reporting, and ecosystem management. IUCN RLE indices based on systematic assessments have high potential to inform global biodiversity reporting for the Aichi Targets and the United Nations Sustainable Development Goals. Expanding the coverage of IUCN RLE assessments, building capacity to undertake them, and establishing stronger policy instruments to manage red-listed ecosystems will be key to maximizing conservation impacts over the coming decades.

This research paper aims to examine the relationship between CO2, temperature, area, fertilizers and rice production in Pakistan. This study used Augmented Dickey Fuller (ADF) and Phillips Perron (PP) unit root tests to check the order of integration of each variable. The cointegration analysis with ARDL bounds testing approach is used to examine the impact of climate change on rice production in Pakistan over time series data from the period 1968 to 2014. The parameter stability test of the model is also checked at the end. The results of estimation show that the important variables of the study are cointegrated demonstrating the presence of long-run association among them. Furthermore, climate change factors, e.g. CO2 and temperature have a long-run and short-run positive effect on the production of rice in Pakistan. This present work is original and it is first time empirically tested the impact of climate change on rice production in Pakistan. The annual time series data of 47 years enhances the validity of the empirical findings. The most fruitful finding of this research is that rice production in Pakistan is positively influenced by emission of carbon dioxide (CO2) at 5 percent significance level in both long-run and short-run.

The current focus on afforestation in climate policy runs the risk of compromising both longterm carbon storage and human adaptation. It also works against efforts to stem the tide of biodiversity loss. We outline why an emphasis on diverse, intact natural ecosystems—as opposed to tree plantations with fast-growing exotic species—will help nations deliver the goals of the Paris Agreement and much more.

Soil moisture (SM) products derived from passive satellite missions are playing an increasingly important role in agricultural applications, especially in crop monitoring and disaster warning. Evaluating the dependability of those products before they can be used on a large scale is crucial. In this study, we assessed the level 2 (L2) SM product from the Chinese Fengyun-3C (FY-3C) radiometer against in situ measurements collected from the Chinese Automatic Soil Moisture Observation Stations (CASMOS) during a one-year period from January 1 to December 31, 2016 in Henan, which is an agricultural province in China. Four statistical parameters were used to evaluate the products’ reliability: mean difference, root-mean-square error (RMSE), unbiased RMSE (ubRMSE), and the correlation coefficient. These statistical indicators revealed that the FY-3C L2 SM product generally did not agree with the in situ SM data from CASMOS. The time-series analysis further indicated that the correlations and estimated error were highly related to the growing periods of the crops in our study area. FY-3C L2 SM data tended to overestimate soil moisture during May, August, and September, when the crops reach their maximum vegetation density, and tended to underestimate the soil moisture content during the rest of the year. The averaged correlation coefficient between FY-3C SM and the Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index was 0.55, which demonstrates that the vegetation water content of the crops considerably influences the SM product. To improve the accuracy of the FY-3C SM product, an improved algorithm that can filter out the influences of the crops should be applied in the future.

Detailed built-up area information is valuable for mapping complex urban environments. Although a large number of classification algorithms about built-up areas have been developed, they are rarely tested from the perspective of feature engineering and feature learning. Therefore we launched a unique investigation to provide a full test of the OLI imagery for 15-m resolution built-up area classification in 2015, in Beijing, China. Training a classifier requires many sample points, and we propose a method based on the ESA's 38-meter global built-up area data of 2014, Open Street Map and MOD13Q1-NDVI to achieve rapid and automatic generation of a large number of sample points. Our aim is to examine the influence of a single pixel and image patch under traditional feature engineering and modern feature learning strategies. In feature engineering, we consider spectra, shape and texture as the input features, and SVM, random forest (RF) and AdaBoost as the classification algorithms. In feature learning, the convolution neural network (CNN) is used as the classification algorithm. In total, 26 built-up land cover maps were produced. Experimental results show that: (1) the approaches based on feature learning are generally better than those based on feature engineering in terms of classification accuracy, and the performance of ensemble classifiers e.g., RF, is comparable to that of CNN. Two dimensional CNN and the 7 neighborhood RF have the highest classification accuracy of nearly 91%. (2) Overall, the classification effect and accuracy based on image patches are better than those based on single pixels. The features that can highlight the information of the target category (for example, PanTex and EMBI) can help improve classification accuracy.

The region of Eastern Europe & Turkey contributed to the SISAL (Speleothem Isotopes Synthesis and AnaLysis) global database with stable carbon- and oxygen isotope time-series from 18 entities from 14 cave systems. The currently available oldest record from this region is the ABA-2 flowstone record (Abaliget Cave; Hungary) reaching back to MIS 6. The temporal distribution of the compiled 18 entities points out a ~20-kyr-long period, centering around 100 ka, lacking speleothem stable isotope record in the region. The regional subset of SISAL_v1 records displays a continuous coverage for the past ~90 kyr for both δ¹⁸O and δ¹³C, with a mean temporal resolution of ~12 yr for the Holocene, and >50 yr for the pre-Holocene period. The highest temporal resolution both for the Holocene and the pre-Holocene was achieved in the So-1 record (Sofular Cave; Turkey). Assessing the data, an important split was found regarding the climatic interpretation of speleothem δ¹⁸O. While the oxygen isotope composition of more continental formations is thought to reflect mainly temperature variations and changes in moisture transport trajectories, it may strongly reflect fluctuations of precipitation amount in the southern part of the region. Variations of δ¹³C primarily interpreted as humidity changes reflecting dry/wet periods across the region. Elevation gradients from three non-overlapping time periods from the region - for the last 5kyr - indicated systematically prevailing elevational gradients around -0.26‰ 100m^-1 in δ¹⁸O. The regional comparison of SISAL_v1 speleothem δ¹⁸O and the temporal distribution of coarsely crystalline cryogenic cave carbonate occurrences back to 45ka does not appear to confirm the finding that occurrence of the latter coincides with the warming from stadial to interstadial conditions.

Flow and transport processes in soil and rock play a critical role in agricultural non-point source pollution (ANSP) loads. In this study, we investigated the ANPS load discharged into rivers from an irrigation district in the Tibetan Plateau, and simulated ANPS load using a distributed model involving detailed descriptions of flow and ANPS transport and transformation processes in the soil and rock. Experiments were conducted for two years to measure soil water content and nitrogen concentrations and the quality and quantity of lateral flow in the rock and at the drainage canal outlet during the highland barley growing period. A distributed model, in which the subsurface lateral flow was described using a step-wise method, was developed to simulate flow and ammonium nitrogen and nitrate nitrogen transport. Sobol’s method was used to evaluate the sensitivity of simulated flow and transport processes to model inputs. The results showed that, with a 21.2% increase of rainfall and irrigation in the highland barley growing period, the average NH4+-N and NO3--N concentrations in the soil layer decreased by 10.8% and 14.3%, respectively, due to increased deep seepage. Deep seepage of rainfall water accounted for 0–52.4% of total rainfall, whereas deep seepage of irrigation water accounted for 36.6–45.3% of total irrigation. NH4+-N and NO3--N discharged into the drainage channel represented 19.9–30.4% and 19.4–26.7% of the deep seepage, respectively. The mean Nash-Sutcliffe coefficients, root mean square errors, and cumulative deviations between the measured and simulated flow rates and NH4+-N and NO3--N concentrations at the surface drainage canal outlet were 0.694, 0.081, and 0.242, respectively, indicating that the proposed method can effectively describe the hydrological and ANPS pollution migration in the plateau irrigation zone. The Sobol’ sensitivity analysis results demonstrated that subsurface lateral flow had the most important first order and total effect on the simulated flow and NH4+-N and NO3--N concentrations at the surface drainage outlet.

While deforestation rates decline globally they are rising in the Western Amazon. Artisanal-scale gold mining (ASGM) is a large cause of this deforestation and brings with it extensive environmental, social, governance, and public health impacts, including large carbon emissions and mercury pollution. Underlying ASGM is a broad network of factors that influence its growth, distribution, and practices such as poverty, flows of legal and illegal capital, conflicting governance, and global economic trends. Despite its central role in land use and land cover change in the Western Amazon and the severity of its social and environmental impacts, it is relatively poorly studied. While ASGM in Southeastern Peru has been quantified previously, doing so is difficult due to the heterogeneous nature of the resulting landscape. Using a novel approach to classify mining that relies on a fusion of CLASlite and the Global Forest Change dataset, two Landsat-based deforestation detection tools, we sought to quantify ASGM-caused deforestation in the period 1984–2017 in the southern Peruvian Amazon and examine trends in the geography, methods, and impacts of ASGM across that time. We identify nearly 100,000 ha of deforestation due to ASGM in the 34-year study period, an increase of 21% compared to previous estimates. Further, we find that 10% of that deforestation occurred in 2017, the highest annual amount of deforestation in the study period, with 53% occurring since 2011. Finally, we demonstrate that not all mining is created equal by examining key patterns and changes in ASGM activity and techniques through time and space. We discuss their connections with, and impacts on, socio-economic factors, such as land tenure, infrastructure, international markets, governance efforts, and social and environmental impacts.

Presented is semivariogram and the Ordinary Kriging analyses of porosity data from the Sava Depression (Northern Croatia), as part of the Croatian part of the Pannonian Basin System. Data are taken from hydrocarbon reservoirs of the Lower Pontian (Upper Miocene) age, which belongs to the Kloštar-Ivanić Formation. Original datasets had been jack-knifed with purpose to “artificially” increased data and calculate the more reliable semivariograms. The results showed that such improvements can assist in the interpolation of more reliable maps. The both sets, made by original and jack-knifed data, need to be compared using geological recognition of non-allowed shapes (“bull-eyes”, “butterfly effects”) as well as cross-validation results. That comparison made possible to select the most appropriate porosity interpolation.

The detection of seismic events at regional and teleseismic distances is critical to Nuclear Treaty Monitoring. Traditionally, detecting regional and teleseismic events has required the use of an expensive multi-instrument seismic array; however in this work, we present DeepPick, a novel seismic detection algorithm capable of array-like performance from a single trace. We achieve this directly, by training our single-trace detector against labeled events from an array catalog, and by utilizing a deep temporal convolutional neural network. The training data consists of all arrivals in the International Seismological Centre Catalog for seven seismic arrays over a five year window from 1 Jan 2010 to 1 Jan 2015, yielding a total training set of 608,362 detections. The test set consists of the same seven arrays over a one year window from 1 Jan 2015 to 1 Jan 2016. We report our results by training the algorithm on six of the arrays and testing it on the seventh, so as to demonstrate the transportability and generalization of the technique to new stations. Detection performance against this test set is outstanding. Fixing a type-I error rate of 1%, the algorithm achieves an overall recall rate of 73% on the 141,095 array beam picks in the test set, yielding 102,394 correct detections. This is more than 4 times the 23,259 detections found in the analyst-reviewed single-trace catalogs over the same period, and represents an 8dB improvement in detector sensitivity over current methods. These results demonstrate the potential of our algorithm to significantly enhance the effectiveness of the global treaty monitoring network.

There is much discussion regarding the Sustainable Development Goals’ (SDGs) capacity to promote inclusive development. While some argue that they represent an opportunity for goal-led alignment of stakeholders and evidence-based decision-making, other voices express concerns as they perceive them as a techno-managerial framework that measures development according to quantitatively defined parameters and does not allow for local variation. We argue that the extent to which the positive or negative aspects of the SDGs prevail depends on the monitoring system’s ability to account for multiple and intersecting inequalities. The need for sub-nationally (urban) representative indicators poses an additional methodological challenge – especially in cities with intra-urban inequalities related to socio-spatial variations across neighbourhoods. This paper investigates the extent to which the SDG indicators’ representativeness could be affected by inequalities. It does so by proposing a conceptual framing for understanding the relation between inequalities and SDG monitoring, which is then applied to analyse the current methodological proposals for the indicator framework of the “urban SDG”, Goal 11. The outcome is a call for 1) a more explicit attention to intra-urban inequalities, 2) the development of a methodological approach to “recalibrate” the city-level indicators to account for the degree of intra-urban inequalities, and 3) an alignment between methodologies and data practices applied for monitoring SDG 11 and the extent of the underlying inequalities within the city. This would enable an informed decision regarding the trade-off in indicator representativeness between conventional data sources, such as censuses and household surveys, and emerging methods, such as participatory geospatial methods and citizen-generated data practices.

The 2030 Agenda for Sustainable Development, the SDGs, are high on the agenda for most countries of the world. In its publication of the SDGs, the UN has provided the goals and target descriptions that, if implemented at a country level, would lead towards a sustainable future. The IAEG (InterAgency Expert Group of the SDGs) was tasked with disseminating indicators and methods to countries that can be used to gather data describing the global progress towards sustainability. However 2030 Agenda leaves it to countries to adopt the targets with each government setting its own national targets guided by the global level of ambition but taking into account national circumstances. At present, guidance on how to go about this is scant, but it is clear that the responsibility is with countries to implement and that it is actions at a country level that will determine the success of the SDGs. SDG reporting by countries takes on two forms 1) global reporting using prescribed indicator methods and data; 2) National Voluntary Reviews where a country reports on its own progress in more detail but is also able to present data that are more appropriate for the country. For the latter, countries need to be able to adapt the global indicators to fit national priorities and context, thus the global description of an indicator could be reduced to describe only what is relevant to the country. Countries may also, for the National Voluntary Review, use indicators that are unique to the country but nevertheless contribute to measurement of progress towards the global SDG target. Importantly, for those indicators that relate to the security of natural resources security (e.g. water) indicators, there are no prescribed numerical targets/standards or benchmarks. Rather countries will need to set their own benchmarks or standards against which performance can be evaluated. This paper presents a procedure that would enable a country to describe national targets with associated benchmarks that are appropriate for the country. The procedure focusses on those SDG targets that are natural resource-security focussed e.g. extent of water-related ecosystems (6.6), desertification (15.3) etc., because the selection of indicator methods and benchmarks is based on the location of natural resources, their use and present state and how they fit into national strategies.

This paper introduces an application of R programming language for geostatistical data processing with a case study of the Mariana Trench, Pacific Ocean. The formation of the Mariana Trench, the deepest among all hadal oceanic depth trenches, is caused by complex and diverse geomorphic factors affecting its development. Mariana Trench crosses four tectonic plates: Mariana, Caroline, Pacific and Philippine. The impact of the geographic location and geological factors on its geomorphology has been studied by methods of statistical analysis and data visualization using R libraries. The methodology includes following steps. Firstly, vector thematic data were processed in QGIS: tectonics, bathymetry, geomorphology and geology. Secondly, 25 cross-section profiles were drawn across the trench. The length of each profile is 1000-km. The attribute information has been derived from each profile and stored in a table containing coordinates, depths and thematic information. Finally, this table was processed by methods of the statistical analysis on R. The programming codes and graphical results are presented. The results include geospatial comparative analysis and estimated effects of the data distribution by tectonic plates: slope angle, igneous volcanic areas and depths. The innovativeness of this paper consists in a cross-disciplinary approach combining GIS, statistical analysis and R programming.

We propose a new technique to prepare statistically-robust benchmarking data for evaluating chemical transport model meteorology and air quality parameters within the urban boundary layer. The approach employs atmospheric class-typing, using nocturnal radon measurements to assign atmospheric mixing classes, and can be applied temporally (across the diurnal cycle), or spatially (to create angular distributions of pollutants as a top-down constraint on emissions inventories). In this study only a short (<1-month) campaign is used, but grouping of the relative mixing classes based on nocturnal mean radon concentrations can be adjusted according to dataset length (i.e., number of days per category), or desired range of within-class variability. Calculating hourly distributions of observed and simulated values across diurnal composites of each class-type helps to: (i) bridge the gap between scales of simulation and observation, (ii) represent the variability associated with spatial and temporal heterogeneity of sources and meteorology without being confused by it, and (iii) provide an objective way to group results over whole diurnal cycles that separates ‘natural complicating factors’ (synoptic non-stationarity, rainfall, mesoscale motions, extreme stability, etc.) from problems related to parameterizations, or between-model differences. We demonstrate the utility of this technique using output from a suite of seven contemporary regional forecast and chemical transport models. Meteorological model skill varied across the diurnal cycle for all models, with an additional dependence on the atmospheric mixing class that varied between models. From an air quality perspective, model skill regarding the duration and magnitude of morning and evening “rush hour” pollution events varied strongly as a function of mixing class. Model skill was typically the lowest when public exposure would have been the highest, which has important implications for assessing potential health risks in new and rapidly evolving urban regions, and also for prioritizing the areas of model improvement for future applications.

Indonesia has a large area of degraded land, i.e. 30 million ha, which could potentially be utilized for biofuel plantations. The leguminous tree pongamia (Pongamia pinnata syn. Milettia pinnata) could be utilized to produce biofuel while restoring degraded land. Here, we explore the potential of pongamia as a source of biofuel and for restoring degraded land in Indonesia. Pongamia occurs across Indonesia, in Sumatra, Java, Bali, West Nusa Tenggara and Maluku. It grows to a height of 15–20 m and can grow in a range of environmental conditions. Its seeds can generate up to 40% crude oil by weight. It can help to restore degraded land and improve soil properties. Pongamia also provides wood, fodder, medicine, fertilizer and biogas. Therefore, as a multipurpose species, pongamia holds great potential to combat Indonesia’s energy crisis and to restore much of the degraded land.

Dust inhalation is a huge concern in the mining environment and within all its operations. In fact, dust to be one of the most serious occupational hazards in the mining industry. Coal and crystalline silica dust are the causes of serious, sometimes fatal lung diseases such as pneumoconiosis, which affects coal miners, as well as silicosis, tuberculosis, chronic bronchitis, emphysema, chronic obstructive pulmonary disease, and chronic renal disease, which affect coal and other types of miners. The resulting effects both affect workers and nearby communities. The mining industry has in the past, employed several approaches to reduce effects of dust. But these strategies have often been ineffective because the grass withers during the dry season and sprayed water is rapidly absorbed or evaporates. This paper endeavors to review information on dust in the mining environment and how it is a nuisance to workers and communities and establish what strategies exist for this.

Earth atmosphere is almost opaque in the infrared: about 374 W/m² is absorbed by the atmosphere out of 396 W/m² surface upward longwave radiation, and only about 22 W/m² leaves the system unabsorbed in the atmospheric window. This makes rise to the idea to approximate the annual global mean energy flow system from a simple idealized greenhouse model, where the surface is surrounded by a single-layer shortwave (SW) transparent, longwave (LW) opaque, non-turbulent atmosphere. The energy flows in this geometry can be described by elementary arithmetic relationships. Starting from this model, the realistic Earth’s atmosphere can be achieved by introducing partial atmospheric SW opacity, partial atmospheric LW transparency and turbulent fluxes during the course of the deduction. The resulted global mean energy flow system is then compared to several data sets such as satellite observations from the CERES mission; estimates using direct surface observations and climate models; global energy and water cycle assessments; and independent detailed clear-sky radiative transfer computations. We find that the deduction from this idealized model approximates the real values in Earth energy budget with reasonable accuracy: the deduced fluxes and the observed ones are consistent within the acknowledged error of observations; while fundamental features of the initial geometry like special ratios and definite relationships between the fluxes are preserved.

This paper contributes to the understating of tornadoes in South Africa using case study analysis. In South Africa tornadoes are the recurring phenomenon (the climatology) but so far they have received less attention. Damages from storms itself (tornadoes inclusive) are significant in South Africa relative to other weather-related disasters for example floods, heat waves, and droughts. For their understanding, a case study approach was adopted in the current study. Data were in courtesy of the following, National Oceanic and Atmospheric Administration (NOAA), National Centers for Environmental Predictions (NCEP), Eumetsat Germany, and South African Weather Service (SAWS). The aim of the study was to provide an overview of the occurrence of tornadoes in South Africa using a Klerksdorp tornado, which occurred on March 4, 2007, Northwest Province in South Africa. From the case study analysis, the tornado was associated with the cold front and cut-off low (both are extratropical circulation) which were the dominant weather systems of the day. Therefore we conclude that, a case study approach may be the best way to study events of these nature for a more informed decision, for example, issuing an early warning system. In future, case studies, for example, involving interaction between extratropical and tropical circulation will also be an interesting study.

Droughts occurring more and more frequently in recent years are usually associated with progressive climate changes. Modern monitoring methods is mainly associated with agricultural use due to the high market demand for services protecting against agricultural losses. In natural wetland ecosystem this problem is neglected which is probably due to fact that this are ecosystems rich in water by definition. Nevertheless this droughts might become a problem of wetlands, whose good condition depends on adequate hydration. Therefore this study focused on determination Crop Water Stress Index (CWSI) for natural heterogeneous wetland habitats. CWSI based on remotely sensed land surface temperature and associated basic meteorological (air temperature and humidity) measurements. CWSI was calculated based on high resolution LST measurements from UAV platform and compare with on ground measurements of soil moisture, CCI, fAPAR and meteorological conditions. Results shows that CWSI properly shows water condition of plants in measured habitats and revels high importance of metrological conditions during data acquisition.

This paper contributes to the understating of tornadoes in South Africa using case study analysis. In South Africa tornadoes are the recurring phenomenon (the climatology) but they have received less attention. Damages from storms itself (tornadoes inclusive) are significant in South Africa relative to other weather-related disasters for example floods, heat waves, and droughts. Case study approach was adopted in the current study. Data were in the courtesy of the following, National Oceanic and Administration (NOOA), National Centers for Environmental Protections (NCEP), Eumetsat, and South African weather Service. The aim of the study was to provide an overview of the occurrence of tornadoes in South Africa using a case study. From the case study analysis, the tornadoes at Klerksdorp on March 4, 2007, was associated with the cold frontal systems and the cut-ff low (extratropical circulation) which were the dominant weather systems of the day. Case study approach may be the best way to study events of these nature for a more informed decision, for example, issuing an early warning system. Case studies, for example, involving interaction between extratropical and tropical circulation may be also more informative.

The continuous and precise mapping of glacier calving fronts is essential for monitoring and understanding rapid glacier changes in Antarctica and Greenland, which have the potential for significant sea level rise within the current century. This effort has been mostly restricted to the slow and painstaking manual digitalization of the calving front positions in thousands of satellite imagery products. Here, we have developed a machine learning toolkit to robustly and automatically detect glacier calving front margins in satellite imagery. The toolkit is based on semantic image segmentation using Convolutional Neural Networks (CNN) with a modified U-Net architecture to isolate the calving fronts from satellite images after having been trained with a dataset of images and their corresponding manually-determined calving fronts. As a case study we train our neural network on a varied set Landsat images with lowered resolutions from Jakobshavn, Sverdrup, and Kangerlussuaq glaciers, Greenland and test the results on novel images from Helheim glacier, Greenland to evaluate the performance of the approach. The neural network is able to identify the calving front in new images with a mean deviation of 96.3 m from the true fronts, equivalent to 1.97 pixels on average, while the corresponding error for manually-determined fronts on the same resolution images is 92.5 m. We find that the trained neural network significantly outperforms common edge detection techniques, and can be used to continuously map out calving-ice fronts with a variety of data products.

The Wester coastal Delta zone of the Netherlands, the relatively more crowded area of the country hosting ten out of seventeen heading to twenty million people, asks for a growing alertness on the topic of resiliency the light of climate-change, like many coastal urban areas do. Approaches of resiliency are often pre-dominated by governmental rescue planning and mobilization of technology innovative solutions. By comparing the float disasters of the 2015 Katrina and 2012 Sandy thunder-storms that hit respectively New Orleans and New York we can learn that the behaviour of people can make the difference in overcoming climate change impact disasters. Post-PhD research with focus on the Dutch Zaanstreek-Waterland area north of the city of Amsterdam, where in 1916 a severe flood took place, proved such. The outcome from focus group sessions is that the alertness and availability of the people to act in case of disaster urgency makes a positive difference, if the memory of the area residents to previous disaster handling is kept alert. This Zaanstreek-Waterland research showed that the disaster from 100 year before still kept the residents alert into resiliency. With that result the defi-nition of resilience should be improved by adding: ‘the interplay in a triangular relationship of civil servants, technicians and residents’.

Despite increased awareness of and attention to the need for sustainable agriculture, fertilizers and compost application in excess of crop requirements remain common agricultural practices in South Korea, causing eutrophication of freshwater and coastal ecosystems. In this study, a phosphorus (P) budget was developed to quantify P inputs, outputs, and retention in a forested- agricultural watershed. The P budget showed that chemical fertilizers and organic compost were the largest source of P (97.6% of the total) followed by atmospheric deposition (2.1% of the total P), whereas forest export (0.2% of the total) and sewage treatment plants (STPs) (0.1% of the total) were negligible. The dominant P outputs were crop harvesting and hydrologic export to surface water. The P balance showed a significant accumulation of P in the watershed; approximately 87% of the total P input was retained in the soils within the watershed. However, P concentrations in drainage water were still high enough to cause eutrophication of downstream reservoirs. The results provide useful information on the proportion of P export and retention in soils and will help support efforts to improve water quality and design better management of agricultural non-point source pollution.

Uganda is one of the poorest nations in the world. To address the developmental challenges and understand social and economic status, it is important to obtain accurate data in a timely manner. Many studies have demonstrated that nighttime lights (NTL) can be used to measure human activities. Nevertheless, methods developed from these studies (1) suffer from coarse resolutions, (2) fail to capture the nonlinearity and multi-scale variability of geospatial data, and (3) perform poorly for agriculture-dependent regions. This study proposes a new enhanced light intensity model (ELIM) to estimate the Gross Domestic Product (GDP) at sub-national scales for Uganda. This model is developed by combining the NTL data from the Suomi National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (NPP-VIIRS), the population data from the Global Human Settlement Layer (GHSL), and information on agricultural production and market prices across several commodity types. This resulted in a gridded dataset for GDP and GDP per capita for Uganda at 1 km spatial resolution and district level to capture the spatial heterogeneity in economic activity.

Remote sensing data and techniques utilized for various purposes including natural disasters such as earthquake as well as flood. The research aims to consume liberates Landsat 8 images for investigating crashed airplanes such as MH370. Overall approximately 300 Landsat images with less than 10% clouds utilized in addition processed through Google Engine Platform. Due to the materials as well as the color of airplane body different from the area which is a plane crashed there, moreover, it should be the characteristics of the plane shapefile different in terms of albedo, temperature as well as vegetation index value. The research observed Landsat 8 data as well as methods utilized in this research, especially, NDVI, albedo in addition to band 4, capable to distinguish between the plane and its surrounding green area. Therefore, our result confirms during the research period, there was no plane on the location as well as MH370 not crashed in this site.

The Loess Plateau is an important region for vegetation restoration in China, however, changes in soil organic carbon (SOC), soil nutrients, and stoichiometry after restoration in this vulnerable ecoregion are not well understood. Typical restoration types, including orchardland (OL), grassland (GL), shrubland (SL), and forestland (FL) were chosen to examine changes in the stocks and stoichiometry of SOC, soil total nitrogen (TN), and soil total phosphorus (TP) at different soil depths and recovery times. Results showed that SOC stocks first increased and then stabilized in OL, GL, and SL at 0–30 cm depth, while in FL, stocks gradually increased. Soil TN stocks first increased and then decreased in OL, SL, and FL with vegetation age at 0–30 cm depth, while soil TP stocks showed little variation between restoration types. In the later stages of restoration, the stocks of SOC and soil TN at 0–30 cm soil depth were still lower than those in natural grassland (NG) and natural forest (NF). The overall C:N, C:P, and N:P ratios increased with vegetation age. Additionally, the SOC, soil TN and soil TP stocks, and C:N, C:P, and N:P ratios decreased with soil depth. The FL had the highest rate of change in SOC and soil TN stocks, at 0-10 cm soil depth. These results indicate a complex response of SOC, soil TN, and soil TP stocks and stoichiometry to vegetation restoration, which could have important implications for understanding C, N, and P changes and nutrient limitations after vegetation restoration.

Due to the advantages of wide coverage and continuity, remotely sensed data are widely used for large-scale drought monitoring to compensate the deficiency and discontinuity of meteorological data. However, few researches have focused on the capability of various remotely sensed drought indices (RSDIs) for representing the spatio-temporal variations of the meteorological droughts. In this study, five RSDIs, namely Vegetation Condition Index (VCI), Temperature Condition Index (TCI), Vegetation Health Index (VHI), Modified Temperature Vegetation Dryness Index (MTVDI) and Normalized Vegetation Supply Water Index (NVSWI) were calculated using Moderate Resolution Imaging Spectroradiometer (MODIS) monthly NDVI and LST. The monthly NDVI and LST data were filtered by Savitzky-Golay (S-G) filtering method. Meteorological station-based drought index represented by Standardized Precipitation Evapotranspiration Index (SPEI) was compared with RSDIs. And the dimensionless Skill Score (SS) method was adopted to identify the spatiotemporally optimal RSDIs for presenting the meteorological droughts in the Yellow River basin (YRB) from 2000 to 2015. The results indicated that (1) RSDIs revealed a decreasing trend to the overall YRB consistent with SPEI except for in winter, and different variations of seasonal trends spatially; (2) the optimal RSDIs in spring, summer, autumn and winter were VHI, TCI, MTVDI and VCI, respectively, and the average correlation coefficient between the RSDIs and SPEI was 0.577 (=0.05); (3) different RSDIs have a 0–3 months’ time-lags compared with meteorological drought index.

The Malyy (Little) Murun massif of the Aldan Shield of the Siberian Craton has long been a kind of the geologists’ Siberian Mecca. It attracted thousands of geologists, prospectors and mineral collectors despite of its remote location. It is famous for a dozen of new and rare minerals, including gemstones charoite and dianite (the latter is the market name for strontian potassicrichrerite), as well as for specific alkaline igneous rocks. Despite of this, the age of the Malyy Murun igneous complex and associated metasomatic and hydrothermal mineral associations remained poorly constrained. In this paper, we provide extensive 40Ar/39Ar geochronological data to reveal its age and temporal history. It appeared that being unique in terms of rocks and constituent minerals, the Malyy Murun is one of multiple alkaline massifs and lavas emplaced in Early Cretaceous (~137-128 Ma) within a framework of extensional setting of the Aldan Shield and nearby Transbaikalian region. The extension has occurred 40-60 million years after the supposed closure of the Mongolia-Okhotsk Ocean and peak of orogeny in Early-Middle Jurassic.

Little research has been done on occupational health ramifications of informal electronic waste (e-waste) recycling work, which is increasingly common in low- and middle-income countries, and very little is known about this in high-income countries. Our study evaluated informal and formal e-waste recycling workers in Chile, which was recently recognized as a high-income country. In 2017 we recruited 78 informal recycling workers from two cities, and 15 formal e-waste recycling workers from one recycling facility. Participants completed a questionnaire and health assessment regarding their involvement in, and potential impacts of, e-waste recycling, among other measures. Participants were primarily male, middle-aged, married with children, and had worked in e-waste recycling for an average of 12 years. Participants generally reported good health status, and chronic disease prevalence was similar to the national prevalence. Workers commonly reported exposures to several occupational stressors, including mental health stressors and noise, as well as insufficient income. Occupational injuries were common and use of safety equipment was low. No significant differences were found between informal and formal workers. Informal e-waste workers in Chile face occupational health challenges. The extent to which these issues impact the health of informal Chilean e-waste workers is unclear and warrants further research.

Due to rapid urbanization, the quantity of wastewater treatment plants (WWTP) has increased, and with it the amount of waste generated by them. Sustainable management of this waste can lead to the creation of energy-rich biogas through the fermentation process. This review presents recent advances in the anaerobic digestion process resulting in greater biogas production. Disintegration techniques for enhancing waste activated sludge fermentation can be generally partitioned into biological, physical and chemical, each of which are covered in this review. These disintegration techniques were compared mainly in terms of their biogas yield. It was found that ultrasonic and microwave disintegration provides the highest biogas yield (>500%); however, they are also the most energy demanding (>10,000 kJ kg-1 total solids).

The challenges to sustainability governance across multiple geographical/cultural contexts lead us to the “piecemeal engineering” idea advocated by the philosopher Karl Popper, which explicitly considers context. We argue for adopting the piecemeal engineering approach, augmented by adaptive policies and modern (online) collaboration platforms to maximize the prospects of sustainable practices worldwide. This recommended course is not intended to be a theory in itself. Rather, it is a well-grounded, practical and practicable stop-gap measure in times when complexity and change outpace theories and strategies. We present a philosophical foundation for this “Augmented Popperian Experimentation.” Focusing on The Water Network (the largest collaborative platform for water researchers and professionals), we show that sustainability-oriented organizations in the water realm and others are inching toward the practice we advocate. We discuss implications.

Satellite altimeters have been used to monitor river and reservoir water levels, from which water storage estimates can be derived. Inland water altimetry can therefore play an important role in continental water resource management. Traditionally, satellite altimeters were designed to monitor homogeneous surfaces such as oceans or ice sheets, resulting in a poor performance over small inland water bodies due to the contribution from land contamination in the returned waveforms. The advent of synthetic aperture radar (SAR) altimetry (with its improved along-track spatial resolution) has enabled the measurement of inland water levels with a better accuracy and an increased spatial resolution. This paper presents three specialized algorithms or retrackers to retrieve water levels from SAR altimeter data over inland water bodies dedicated to minimizing land contamination from the waveforms. The performances of the proposed waveform portion selection method with three retrackers, namely, the threshold retracker, Offset Centre of Gravity (OCOG) retracker and 2-step physical-based retracker, are compared. Time series of water levels are retrieved for water bodies in the Ebro River basin (Spain). The results show good agreement with in situ measurements from the Ebro Reservoir (width is approximately 1.8 km) and Ribarroja Reservoir (width is approximately 400 m) with un-biased root-mean-square errors (RMSEs) of approximately 0.28 m and 0.16 m, respectively. The performances of all three retrackers are also compared with the European Space Agency’s ocean retracker in the Sentinel-3 Level-2 product.

The study focuses on the application of R programming language towards marine geological research with a case study of Mariana Trench. Due to its logical and straightforward syntax, multi-functional standard libraries, R is especially attractive to the geologists for the scientific computing. Using R libraries, the unevenness of various factors affecting Mariana Trench geomorphic structure has been studied. These include sediment thickness, slope steepness, angle aspect, depth at the basement and magmatism of the nearby areas. Methods includes using following R libraries: {ggplot2} for regression analysis, Kernel density curves, compositional charts; {ggalt} for Dumbbell charts for data comparison by tectonic plates, ranking dot plots for correlation analysis; {vcd} for mosaic plots, silhouette plots for compositional similarities among the bathymetric profiles, association plots; {car} for ANOVA. Bathymetric GIS data processing was dome in QGIS and LaTeX. The innovativeness of the work consists in the multi-disciplinary approach combining GIS analysis and statistical methods of R which contributes towards studies of ocean trenches, aimed at geospatial analysis of big data.

Operational weather and also flood forecasting has been performed successfully for decades and is of great socioeconomic importance. Up to now, forecast products focus on atmospheric variables, such as precipitation, air temperature and, in hydrology, on river discharge. Considering the full terrestrial system from groundwater across the land surface into the atmosphere, a number of important hydrologic variables are missing especially with regard to the shallow and deeper subsurface (e.g. groundwater), which are gaining considerable attention in the context of global change. In this study, we propose a terrestrial monitoring/forecasting system using the Terrestrial Systems Modeling Platform (TSMP) that predicts all essential states and fluxes of the terrestrial hydrologic and energy cycles from groundwater into the atmosphere. Closure of the terrestrial cycles provides a physically consistent picture of the terrestrial system in TSMP. TSMP has been implemented over a regional domain over North Rhine-Westphalia and a continental domain over European in a real-time forecast/monitoring workflow. Applying a real-time forecasting/monitoring workflow over both domains, experimental forecasts are being produced with different lead times since the beginning of 2016. Real-time forecast/monitoring products encompass all compartments of the terrestrial system including additional hydrologic variables, such as plant available soil water, groundwater table depth, and groundwater recharge and storage.

This paper analyses six major transitions in watershed management in the Lower Mississippi River from the early 19th century till present. A conceptual framework is developed for analysing the role of visions, agency and niches in water management transitions and applied to a historical case on water management in the Lower Mississippi River. It is shown that water management regimes change over time and that major transitions were preceded by niches, in which new visions were developed and empowered. The case shows that: (i) emerging visions play an important role in guiding transitions; (ii) agency enables the further diffusion of visions and niches; (iii) vision champions play an important role in transitions, but are not decisive; (iv) each transition has led to an extension of the number of societal functions provided, which has led to more complex water management regimes in which functions are combined and integrated; and (v) external landscape factors are important, as they can lead to awareness and urgency in important decision making processes.

Computation of Common Middle Point seismic sections and their subsequent time migration and diffraction imaging provides very important knowledge about the internal structure of 3D heterogeneous geological media and are key elements for successive geological interpretation. Full-scale numerical simulation, that computes all single shot seismograms, provides a full understanding of how the features of the image reflect the properties of the subsurface prototype. Unfortunately, this kind of simulations of 3D seismic surveys for realistic geological media needs huge computer resources, especially for simulation of seismic waves’ propagation through multiscale media like cavernous fractured reservoirs. In order to significantly reduce the query of computer resources we propose to model these 3D seismic cubes directly rather than the shot-by-shot simulation with subsequent CMP stacking. To do that we modify the well known "exploding reflectors principle" for 3D heterogeneous multiscale media by use of the finite-difference technique on the base of grids locally refined in time and space. To be able to simulate realistic models and acquisition we develop scalable parallel software, which needs reasonable computational costs. Numerical results for simulation of Common Middle Points sections and their time migration are presented and discussed.

The objective of this work is to evaluate the impact of the innovative modifications made to the conventional effluent capture and discharge devices used in subsurface flow wetlands (SSFW). The main modifications developed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. This improved innovative device was applied and evaluated in two subsurface flow wetlands, one on a pilot scale and one on a real scale. To evaluate the impact of the innovative device with respect to conventional one in the operational functioning of subsurface flow wetlands, the elimination of chemical oxygen demand was measured and compared. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device, confirming the validity and effectiveness of the modifications implemented in the effluent capture and discharge devices used in SSFW.

An oceanic radar altimeter such as TOPEX/Poseidon (T/P) is typically for observing elevation changes over the open oceans or large inland lakes/rivers, with limited applications over solid earth due to its large footprint and susceptibility to waveform contamination and slope effect. Here we demonstrate that it is possible to construct a long-term time series of glacier elevation change from T/P-series radar altimeters over two flat surfaces near a glacier terminus and an icefield (Sites A and B, with slopes of 2° and 0.8°) in Mt. Tanggula, Tibet, at elevations over 5400 m. We retracked radar waveforms using the subwaveform threshold algorithm, selected quality altimeter data (1/4 of the original) with nearly the same slope and adjusted the original elevations by fitting with a time-varying, 2nd order surface. The glacier elevation changes at the two sites from T/P (1993–2002) show seasonal elevation oscillations with linear rates at about −3 m/year and abnormal seasonal changes around the 1997–98 El Niño. Site A is over a deep valley in southern Tanggula. Its elevation dropped about 30 m over 1993–2002 (from T/P) and the glacier almost disappeared by 2016 (from altimeters and satellite images). Despite the sporadic Jason-2 and Jason-3 altimeter data, we also derived long-term rates of glacier elevation change over 1993–2017. Landsat-derived glacier area and elevation changes near the two sites confirm the rapid glacier thinning from the altimeters. The glacier meltwater near Site A supplied increasing source water to Chibuzhang Co west of Mt. Tanggula, contributing partially to its accelerated rising lake level. The glacier thinning at Site B (icefield) was correlated with the increased discharge of the Tuotuo River in eastern Mt. Tanggula, a source region of the Yangtze River. The successful detection of glacier thinning at the two sites shows that T/P-series altimeters can serve as a virtual station at a flat glacier spot to monitor long-term glacier elevation changes in connection to climate change. This virtual station concept is particularly useful for inaccessible glaciers, but its implementation faces two challenging issues: increasing the volume of quality altimeter data and improving the ranging accuracy over a targeted mountain glacier spot.

Coastal areas in the South Coast of West Java Province have the potential to develop marine ecotourism, one of which is the Pangandaran area which must be transferred into economic value by not damaging natural resources. Marine ecotourism development is not only intended to raise foreign exchange for local governments, but are also expected to play a role in maintaining natural resources sustainably. This research aims to analyze the sustainable synergistic marine ecotourism development model. The method used in this research using quantitative descriptive method. The Quantitative descriptive method is used to describe the general condition of the research area, using primary and secondary data. The technique of taking respondents using accidental sampling as many as 50 respondents consisting of tourists, public figures, fishermen who have side jobs as a provider of marine ecotourism services. The analysis tool used is through a Rapfish model approach to measuring the synergistic model of sustainable development of marine ecotourism. Based on the results of a research on a sustainable synergistic marine ecotourism development model by measuring the ecological dimensions of environmental services in high conditions, the economic dimension of marine ecotourism is in moderate condition. Marine ecotourism technology in low conditions and social dimensions of marine ecotourism in low conditions. Model development of sustainable marine ecotourism synergistic with regard to the dimension of environmental, economic and social institutions should be able to form integrated from infrastructure to support marine ecotourism up to raise the level of income of fishermen who have a second job as a marine ecotourism providers. The infrastructure and regulatory dimensions are recommended to use the technology information to promote marine ecotourism optimally and regulations need to make marine ecotourism zoning rules and infrastructure improvements.

Understanding the distribution in drought and floods plays an important role in disaster risk management. The present study aims to explore the trends in the standardized precipitation index and extreme precipitation days in China, as well as to estimate the economic losses they cause. We found that in the Northeast China, northern of North China and northeast of Northwest China were severely affected by drought disasters (average damaged areas were 6.44 million hectares) and the most severe drought trend was located in West China. However, in the north of East China and Central China, the northeastern of the Southwest China was severely affected by flood disasters (average damaged areas were 3.97 million hectares) and the extreme precipitation trend is increasing in the northeastern of the Southwest China. In the Yangtze River basin, there were increasing trends in terms of drought and extreme precipitation, especially in the northeastern of the Southwest China, where accompanied by severe disaster losses. By combining the trends in drought and extreme precipitation days with the distribution of damaged areas, we found that the increasing trend in droughts shifted gradually from north to south, especially in the Southwest China, and the increasing trend in extreme precipitation gradually shifted from south to north.

As the traditional sand fixation measures have many limitations, new sand fixing technologies and methods are urgently needed to be developed. This study demonstrated a new sand fixation method using palm mat geotextile to fix the sand dunes and plant grass. We experimented the physical property of the palm mat geotextile in the laboratory, and observed the vegetation growth in the Hobq Desert. The results showed that (1) The palm mat geotextile is more lighter and tougher than the common straw mat geotextile, the average weight, thickness and tensile strength of palm mat geotextile were 2023 g/m², 20.14 mm, and 842–860 N/m, after a year of field observation, the tensile strength decreased by only 2%. (2) The palm mat geotextile had excellent water retention capacity and scouring resistance, the maximum water content reached 227%, and the substrate lost 2.9% after the simulation of heavy rainfall for 3 hours with rainfall intensity of 30 mm/h in laboratory. (3) The palm mat geotextile significantly decreased the soil temperature and increase the humidity in summer, the observed results shown that the palm mat geotextile had the greatest influence on 5cm depth of the soil temperature and 10cm depth of soil humidity. (4) The field experiment results showed that the vegetation coverage and the biomass of the palm mat geotextile with 2 m × 2 m were 35% and 11.21 g (3.9 times and 4.1 times than that of control group, 1.7 times and 1.8 times than that of high-banded salix psammophila sand-barriers group which is widely used in the Hobq Desert).

Thunderstorm electrification has been studied for hundreds of years. Several mechanisms have been proposed to elucidate the electrification, including convective charging, inductive precipitation charging, and ice crystal-graupel collision charging. Field observations and model studies have demonstrated the vital roles that graupel and ice crystals play in the electrification, but the mechanism of the collision charging is still unclear. The fundamental essence of relative growth rate theory used for explaining the tripole charge structure in thunderclouds also needs a further exploration. We analyze the processes of ice crystal-graupel collision charging from charge migration inside hydrometeors to charge separation between two hydrometeors. The driving effects of temperature gradient and chemical potential gradient in charge migration are clarified, as well as the applicability of the relative growth rate theory, thermoelectric effect and surface tension gradient in different humidities. Based on the understanding from these electrification mechanisms, we propose that the essence of charge separation is driven by non-thermal equilibrium, and future studies on thunderstorm electrification should focus on the dynamical non-thermal equilibrium of cloud particles.

A D-grade type coal was burned under simulated domestic practices in a controlled laboratory set-up, in order to characterize emissions of volatile organic compounds (VOCs); viz. benzene, toluene, ethylbenzene and xylenes (BTEX). Near-field concentrations were collected in a shack-like structure constructed using corrugated iron, simulating a traditional house found in informal settlements in South Africa. Measurements were carried out using the Synspec Spectras GC955 real-time monitor over a three-hour burn cycle. The 3-hour average concentrations (in µg/m³) of benzene, toluene, ethylbenzene, p-xylene and o-xylene were 919 ± 44, 2051 ± 91, 3838 ±19, 4245 41 and 3576 ± 49, respectively. The cancer risk for adult males and females in a typical SA household exposure scenario, was found to be 1.1 -1.2 and 110-120 folds higher than the US EPA designated risk severity indicator (1E^-6), respectively. All four TEX compounds recorded the Hazard Quotient (HQ) of less than 1, indicating a low risk of developing related non-carcinogenic health effects. The HQ for TEX ranged from 0.001– 0.05, with toluene concentrations being the lowest and ethylbenzene the highest. This study has demonstrated that domestic coal burning may be a significant source of BTEX emission exposure.

As the problem of light pollution becomes more serious, more and more scholars pay attention to this issue and carry out related research. In the perspective of cities, the measurements of light pollution mainly focus on the brightness of the sky or artificial lighting on the ground. However, there is lack of research on the whole urban space. With the two-dimensional brightness analyses, this paper processes the changes of the light environment of the whole urban space into image quantization. It gets the 3D and 2D light environment changes of luminance distribution, color temperature distribution and chromaticity in the three space layers, the ground layer, the urban canopy layer and the sky layer, from dusk with natural light to night with artificial lighting completely. It is found that the brightness difference between the light environments among the three city levels gradually reduces with the measuring time, and the final values maintain at 0.11~0.25 cd/m². In the ground layer, the light environment is mainly affected by the lighting facilities, and vegetation can prevent the light from scattering up. The light environment of the urban canopy layer is the brightest in the whole city space and has the largest influence on the sky layer. The color concentrates in the range of yellow and red. The color temperature near the ground distributes in 3000K~15000K, and near the sky distributes in 2300K~2700K which is warmer than the natural night sky. The sky brightness of Dalian city is about 951 times than the natural night sky.

Putting value to ecosystem services is something that society still refuses or simply ignores because it is not aware of the benefits that ecosystems provide us. In fact, people should be aware that a good understanding of ecosystem services can lead to win-win situations. Being aware of the importance of preserving the ecosystem and attaching value to its services will enable the development of self-sustaining strategies and appropriate policies for better ecological governance. Decades of over exploitation of natural resources, introduction and spread of alien species and, also, climate change, forest fires among other threats, have fostered biodiversity loss. The European Union Biodiversity Strategy has as one of its main goals to stop biodiversity loss and the degradation of ecosystem services; if possible, to recover the most threatened and degraded ecosystems, based on 20 Actions divided into 6 Targets. The present work falls within the scope of Action 5 of Target 2 – Improve knowledge of ecosystems and their services in the EU. The specific focus of this study is the Site of Community importance “Dunas de Mira, Gândara and Gafanhas” (Portugal) and the assessment of its ecosystem services, in accordance with the methodology proposed by the MAES (Mapping and Assessment of Ecosystems and their Services) Working Group. The work currently under way, a small segment of which is presented here, aims to identify, map and, when possible, assign value to the ecosystem services. For this purpose, modern GIS technologies will be used. This approach was implemented using a combination of data and tasks, including the photo-interpretation of Sentinel 2 (COPERNICUS Program) satellite imagery. The data geoprocessing tasks and image segmentation were developed using QGIS software and IMPACT Toolbox software (developed by the Joint Research Center – JRC, of the European Union), respectively. The analysis of Land Use and Burned Areas maps for the SCI "Dunas de Mira, Gândara and Gafanhas" led us to conclude that Forests ecosystems, the most affected by the fire of October 2017, continue to have the greatest expression in the area under study even though they have lost more than 50% of the area, and their services were also the ones most affected by the fire.

Intensive greenhouse horticulture can cause various environmental problems. Among them, the management, storage and processing of crop residues can provoke aquifer contamination, pest proliferation, bad odors or the abuse of phytosanitary treatments. Biosolarization put in value any fresh plant residue and is an efficient technique for the control of soil-borne diseases. This study aims to examine an alternative means of managing greenhouse crop residues through biosolarization and to investigate the influence of organic matter on yield and quality of tomato (Solanum lycopersicum, L.) fruit. With this purpose, the following nutritional systems were evaluated: inorganic fertilization with and without brassica pellets (Fert, Fert + and Fert ++), fresh tomato plant debris with and without brassica pellets (Rest, Rest + and Rest ++) and no fertilizer application (Control). The addition of organic matter equaled all the treatments except for control with regard to yield and quality of the tomato fruit. In light of these results, the application of tomato plant debris to the soil through biosolarization is postulated as an alternative for the management of crop residues, solving an environmental problem and having a favorable impact on the production and quality of tomatoes as a commercial crop.

The finding of important explanatory variables for the location parameter and the scale parameter of the generalized extreme value (GEV) distribution, when the latter is used for the modelling of annual streamflow maxima, is known to have reduced the uncertainties in inferences, as estimated through regional flood frequency analysis frameworks. However, important explanatory variables have not been found for the GEV shape parameter, despite its critical significance, which stems from the fact that it determines the behaviour of the upper tail of the distribution. Here we examine the nature of the shape parameter by revealing its relationships with basin attributes. We use a dataset that comprises information about daily streamflow and forcing, climatic indices, topographic, land cover, soil and geological characteristics of 591 basins with minimal human influence in the contiguous United States. We propose a framework that uses random forests and linear models to find (a) important predictor variables of the shape parameter and (b) an interpretable model with high predictive performance. The process of study comprises of assessing the predictive performance of the models, selecting a parsimonious predicting model and interpreting the results in an ad-hoc manner. The findings suggest that the shape parameter mostly depends on climatic indices, while the selected prediction model results in more than 20% higher accuracy in terms of RMSE compared to a naïve approach. The implications are important, since incorporating the regression model into regional flood frequency analysis frameworks can considerably reduce the predictive uncertainties.

This study evaluated the physicochemical, mineralogical properties, mobile chemical species’ bioavailability and translocation in Brassica juncea and Spinacea oleracea L plants of a South African coal fired power utility. Coal fly ash (CFA) disposal is associated with various environmental and health risks including air, soil, surface and ground water pollution due to the leaching of toxic chemical species; these ends up in food webs affecting human health, while repeated inhalation causes bronchitis, silicosis, hair loss and lung cancer. The morphology, chemical, and mineralogical composition of CFA were determined using Scanning Electron Microscopy (SEM), X-ray fluorescence (XRF) and X-ray Diffraction, respectively. In pot culture experiments, S. oleracea L and B. juncea plants were grown in three sets of pots containing CFA (set 1), soil (set 2) and a mixture of CFA plus soil at ratio 1:1 (50% CFA: 50% soil) (set 3), while no plants were grown in set 4 as a control for the leachate samples. SEM showed that surface morphology of CFA has a lower degree of sphericity with irregular agglomerations of many particles. The XRF results revealed that CFA contains 43.65%, 22.68% and 10.89% of SiO₂, Al₂O₃ and Fe₂O₃ respectively which indicate that the CFA is an alumino-silicate material. While XRD showed that the coal CFA contains mullite as a major phase followed by quartz mineral phases. Chemical species such as Fe, Mn, B, Ba and Zn were accumulated highly in most parts of the plant species. However, B. juncea showed higher potential to accumulate chemical species as compared to S. oleracea L. The bioconcentration and translocation factors (BF and TF) showed that B. juncea was the most effective in terms of bioconcentration and translocation of most of the chemical species. This indicates that B. juncea has potential in application for phytoremediation of CFA dumps and could contribute to remediation of CFA dumps and reduction of potential health and environmental impacts associated with CFA.

Full waveform (FW) LiDAR holds great potential for retrieving vegetation structure parameters at a high level of detail, but this prospect is constrained by practical factors such as lack of available handy processing tools and technical intricacy of waveform processing. This study introduces a new product, named the Hyper Point Cloud (HPC) derived from FW LiDAR data, and explore its potential applications such as tree crown delineation using the HPC-based intensity and percentile height (PH) surfaces, which show a promising solution to the constraints of using FW LiDAR data. Results of the HPC present a new direction to handle FW LiDAR data and offer prospects for studying the mid-story and understory of vegetation with high point density (~ 182 points/m2). The intensity-derived digital surface model (DSM) generated from the HPC shows that the ground region has larger maximum intensity (MAXI) and mean intensity (MI) than the vegetation region while having smaller total intensity (TI) and number of intensities (NI) at the given grid cell. Our analysis of intensity distribution contours at individual tree level exhibit similar patterns, indicating that the MAXI and MI are decreasing from the tree crown center to tree boundary while a rising trend is observed for TI and NI. These intensity variable contours provide a theoretical justification for using HPC-based intensity surfaces to segment tree crowns and exploit their potential for extracting tree attributes. The HPC-based intensity surfaces and the HPC-based PH Canopy Height Models (CHM) demonstrate promising tree segmentation results comparable to the LiDAR derived CHM for estimating tree attributes such as tree locations, crown widths and tree heights. We envision that products such as the HPC and the HPC-based intensity and height surfaces introduced in this study can open new perspectives to use FW LiDAR data and alleviate the technical barrier of exploring FW LiDAR data for detailed vegetation structure characterization.

Analysis of the hourly Canadian Prairie data for the past 60 years has transformed our quantitative understanding of land-atmosphere-cloud coupling. The key reason is that trained observers made hourly estimates of opaque cloud fraction that obscures the sun, moon or stars, following the same protocol for 60 years at all stations. These 24 daily estimates of opaque cloud data are of sufficient quality that they can be calibrated against Baseline Surface Radiation Network data to give the climatology of the daily short-wave, longwave and total cloud forcing (SWCF, LWCF and CF). This key radiative forcing has not been available previously for climate datasets. Net cloud radiative forcing reverses sign from negative in the warm season to positive in the cold season, when reflective snow reduces the negative SWCF below the positive LWCF. This in turn leads to a large climate discontinuity with snow cover, with a systematic cooling of 10°C or more with snow cover. In addition, snow cover transforms the coupling between cloud cover and the diurnal range of temperature. In the warm season, maximum temperature increases with decreasing cloud, while minimum temperature barely changes; while in the cold season with snow cover, maximum temperature decreases with decreasing cloud and minimum temperature decreases even more. In the warm season, the diurnal ranges of temperature, relative humidity, equivalent potential temperature and the pressure height of the lifting condensation level are all tightly coupled to opaque cloud cover. Given over 600 station-years of hourly data, we are able to extract, perhaps for the first time, the coupling between cloud forcing and the warm season imbalance of the diurnal cycle; which changes monotonically from a warming and drying under clear skies to a cooling and moistening under cloudy skies with precipitation. Because we have the daily cloud radiative forci, which is large, we are able to show that the memory of water storage anomalies, from precipitation and the snowpack, goes back many months. The spring climatology shows the memory of snowfall back through the entire winter, and the memory in summer goes back to the months of snowmelt. Lagged precipitation anomalies modify the thermodynamic coupling of the diurnal cycle to the cloud forcing, and shift the diurnal cycle of mixing ratio which has a double peak. The seasonal extraction of the surface total water storage is a large damping of the interannual variability of precipitation anomalies in the growing season. The large land-use change from summer fallow to intensive cropping, which peaked in the early 1990s, has led to a coupled climate response that has cooled and moistened the growing season, lowering cloud-base, increasing equivalent potential temperature, and increasing precipitation. We show a simplified energy balance of the Prairies during the growing season and its dependence on reflective cloud.

In order to study the petrogenesis and tectonic setting of Permian A-type granites and their relationships with hydrothermal mineralization along the Hegenshan-Heihe suture zone (HHSZ) in northeastern China, we select the newly discovered Hongyan Cu-polymetallic deposit in the northeastern part of the HHSZ that develops three stages of mineralization associated with the Shanshenfu alkali-feldspar granite (SAFG). The zircon U-Pb dating and whole rock geochemistry suggest that the SAFG is a typical A-type granite formed in the Early Permian. The zircon Hf isotopes and trace elements suggest that the SAFG has high Ti-in-zircon temperature (721–990℃), high magmatic oxygen fugacity and largely positive εHf(t) (+6.0 to +9.9). Therefore, we propose that the SAFG was derived from the crustal assimilation and fractional crystallization of the charnockitized juvenile crust. The high oxygen fugacity favors the chalcophile elements (e.g., Cu, Au, Ag) of the source region enriched in the fluid phases after magmatic fractional crystallization, consequently facilitating subsequent hydrothermal mineralization, which is also consistent with the characteristics of ore-forming fluids that changed from the initial high temperature, high salinity, high fO2 and CO2-rich magmatic-hydrothermal fluids of stage I to CO2-poor, dilute, and cooling meteoric fluids of stage III. Combined with regional geological background, the Permian A2-type granites along the HHSZ can be formed in post-collisional slab break-off process. In subsequent exploration for hydrothermal deposits along the HHSZ, the Permian A-type granites with arc-related juvenile crustal source and high fO2 have great potential and need more attention.

Mixing layer height (MLH) is a crucial parameter for air quality modelling that is still not routinely measured. Common methods for MLH determination use atmospheric profiles recorded by radiosonde but they suffer from course temporal resolution since balloon launching is only twice a day. Recently cheap ceilometers are gaining popularity in the retrieval of MLH diurnal evolution based on aerosol profiles. This study presents a comparison of a proprietary (Jenoptik) and a free available (STRAT) algorithms to retrieve MLH diurnal cycle. The comparison is accomplished in summer season over urban area and radiosonde data is used to estimate MLHs according to parcel, lapse rate, and Richardson methods (the last algorithm is used as a reference in the study) in addition. It was found that STRAT and Jenoptik give lower MLH than radiosonde with an underestimation of about 150m and 650m respectively. Additionally, STRAT showed reasonable performance in tracking of MLH diurnal evolution. Daily MLH maximum of about 2000m was found in the late afternoon (18-19 LT). In contrast, Jenoptik algorithm showed more weaknesses, mainly attributed to its real-time operation and independent processing of a single profile. At night and during morning transition period, both lidar-based methods showed difficulties as MLH was often in the ceilometer’s incomplete overlapping zone so residual or advected aerosol layers aloft were misleadingly reported as mixing layer (ML).

Observed ENSO statistics exhibits a non-gaussian behavior, which is indicative of the presence of nonlinear processes. In this paper we use the Recharge Oscillator model (ROM), a largely used Low-Order Model (LOM) of ENSO, as well as methodologies borrowed from the field of statistical mechanics to identify which aspects of the system may give rise to nonlinearities that are consistent with the observed ENSO statistics. In particular, we are interested in understanding whether the nonlinearities reside in the system dynamics or in the fast atmospheric forcing. Our results indicate that one important dynamical nonlinearity often introduced in the ROM cannot justify a non-gaussian system behavior, while the nonlinearity in the atmospheric forcing can instead produce a statistics similar to the observed. The implications of the non-Gaussian character of ENSO statistics for the frequency of extreme El Nino events is then examined.

Geologists employ high-spatial-resolution (HR) remote sensing (RS) data for many diverse applications as they effectively reflect detailed geological information, enabling high-quality and efficient geological surveys. Applications of HR RS data to geological and related fields have grown recently. By analyzing these applications, we can better understand the results of previous studies and more effectively use the latest data and methods to efficiently extract key geological information. HR optical remote sensing data are widely used in geological hazard assessment, seismic monitoring, mineral exploitation, glacier monitoring, and mineral information extraction due to high accuracy and clear object features. Compared with optical satellite images, synthetic-aperture radar (SAR) images are stereoscopic and exhibit clear relief, strong performance, and good detection of terrain, landforms, and other information. SAR images have been applied to seismic mechanism research, volcanic monitoring, topographic deformation, and fault analysis. Furthermore, a multi-standard maturity analysis of the geological applications of HR images using literature from the Science Citation Index reveals that optical remote sensing data are superior to radar data for mining, geological disaster, lithologic, and volcanic applications, but inferior for earthquake, glacial, and fault applications. Therefore, geological remote sensing research needs to be truly multidisciplinary or interdisciplinary, ensuring more detailed and efficient surveys through cross-linking with other disciplines. Moreover, the recent application of deep learning technology to remote sensing data extraction has improved automatic processing and data analysis capabilities.

Disaster Risk Reduction (DRR) is a high priority on the agenda of main stakeholders involved in sustainable development and Earth Observation (EO) can provide useful, timely and economical information in this context. This short communication outlines the European Space Agency’s (ESA) specific initiative to promote the use and uptake of satellite data in the global development community: ‘Earth Observation for Sustainable Development (EO4SD)’. One activity area under EO4SD is devoted to Disaster Risk Reduction: EO4SD DRR. Within this project, a team of European companies and institutions are tasked to develop EO services for supporting the implementation of DRR in International Financial Institutions’ (IFI) projects. Integration of satellite-borne data and ancillary data to generate insight and actionable information is thereby considered a key factor for improved decision making. To understand and fully account for the essential user requirements (IFI & Client States), engagement with technical leaders is crucial. Fit-for-purpose use of data and comprehensive capacity building eventually ensure scalability and long-term transferability. Future perspectives of EO4SD and DRR regarding mainstreaming are also highlighted.

While deforestation rates decline globally they are rising in the western Amazon. Artisanal-scale gold mining (ASGM) is a large cause of this deforestation and brings with it extensive environmental, social, governance, and public health impacts, including large carbon emissions and mercury pollution. Underlying ASGM is a broad network of factors that influence its growth, distribution, and practices such as poverty, flows of legal and illegal capital, conflicting governance, and global economic trends. Despite its central role in land use and land cover change in the western Amazon and the severity of its social and environmental impacts, it is relatively poorly studied. While ASGM in southeastern Peru has been quantified previously, doing so is difficult due to the heterogeneous nature of the resulting landscape. Using a novel approach to classify mining that relies on a fusion of CLASlite and the Global Forest Change dataset, two Landsat-based deforestation detection tools, we sought to quantify ASGM-caused deforestation in the period 1984-2017 in the southern Peruvian Amazon and examine trends in the geography, methods, and impacts of ASGM across that time. We identify nearly 100,000 ha of deforestation due to ASGM in the 34-year study period, an increase of 21% compared to previous estimates. Further, we find that 10% of that deforestation occurred in 2017, with 53% occurring since 2011. Finally, we demonstrate key patterns and changes in ASGM activity and techniques through time and space and discuss their connections with, and impacts on, socio-economic factors such as land tenure, infrastructure, international markets, governance efforts, and social and environmental impacts.

For water-stressed regions like Iran improving the effectiveness and productivity of agricultural water-use is of utmost importance due to climate change and unsustainable demands. Therefore, a hydro-economic model has been developed here for the Zarrine River Basin with the central concept of that demands are value-sensitive functions, where quantities of water-uses at different locations and times have a changeable economic benefits. To do this, the potential crop yields and the surface and groundwater resources, especially Boukan Dam inflow are simulated using the hydrologic model, SWAT, based on predicted climatic scenarios i.e. quantile mapping-downscaled projections. Then, to allocate the agricultural water based on the agro- economic crop water productivity (AEWP) of crops, a basin-wide water management tool, MODSIM, is customized. Next, a simulation- optimization model has been developed using a coupled CSPSO-MODSIM, to optimize the total AEWP, considering climatic impact and crop pattern scenarios, for 2020-2038, 2050-2068 and 2080-2098 periods. Finally, the optimum crop pattern and crop water irrigation depths are presented for different RCPs and periods. The results indicated that this approach will improve considerably the AEWPs and decrease the agricultural water-use up to 40%. Thus, this integrated model is able to support water authorities and other stakeholder in a water-scarce basin, as is the study area.

The acquisition of high resolution morpho-bathymetric data on the Calabro Tyrrhenian continental margin (Southern Italy) enabled us to identify several mass-wasting processes, including shallow gullies, shelf-indenting canyons and landslides. In particular, we focus our attention on submarine landslides occurring from the coast down to -1700 m, with mobilized volumes ranging from some hundreds up to tens of millions of cubic meters. These landslides also show a large variability of geomorphic features in the headwall, translational and toe domain. Based on their morphology and distribution, four main classes of coastal/submarine landslides have been recognized: a) rocky coastal/shallow-water failures characterized by large hummocky deposits offshore; b) large-size and isolated scars with associated landslide deposits, mostly occurring on open slope environment and lower part of tectonically-controlled escarpments; c) a linear array of coalescent and nested landslide scars occurring in the upper part of tectonically-controlled escarpments and canyon flanks; d) a cauliflower array of small and coalescent scars occurring in canyon headwall. The latter two classes of landslides are also characterized by a marked retrogressive evolution and their landslide deposits are generally not recognizable on the morpho-bathymetric data. By integrating the morpho-bathymetric dataset with the results of previous studies, we also discuss the main factors controlling the variability in size and morphology of these submarine landslides to provide insights on their failure and post-failure behavior.

Carbonate precipitation induced by microorganism has become a hot spot in the field of carbonate sedimentology, while the effect of different magnesium on biominerals has rarely been studied. Therefore, magnesium sulfate and magnesium chloride were used to investigate the significant role played on carbonate minerals. In this study, Staphylococcus epidermidis Y2 was isolated and identified by 16S rDNA homology comparison. The ammonia, pH, carbonic anhydrase, carbonate and bicarbonate ions were investigated. The mineral phase, morphology and elemental composition were analyzed by XRD and SEM-EDS. The ultrathin slices of bacteria were analyzed by HRTEM-SAED and STEM. The result showed that this bacterium could release ammonia and carbonic anhydrase to increase pH, and elevate the supersaturation via a large number of carbonate and bicarbonate ions released through carbon dioxide hydration catalyzed by carbonic anhydrase. The crystal cell density of monohydrocalcite was lower in magnesium chloride medium than that in magnesium sulfate medium. The crystal grew in a mode of spiral staircas in magnesium sulfate medium, while in a concentric circular pattern in magnesium chloride medium. There was no obvious intracellular biomineralization. This study may be helpful to further understand the biomineralization mechanism, may also provide some references for the reconstruction of paleogeological environment.

A finite-difference approach with non-uniform meshes was presented for simulating magnetotelluric responses in 2D structures. We presented the formulation of this scheme and gave some sights into its successful implementation, and compared finite-difference solution with known numerical results and simple analytical solutions. First, a homogeneous half-space model was tested and the finite-difference approach can provide very good accuracy for 2D magnetotelluric modeling. Then we compared to the analytical solutions for the two-layered model, the relative errors of the apparent resistivity and the impedance phase were both increased when the frequency was increased. In the end, we compare our finite-difference simulation results with COMMEMI 2D-0 model with the finite-element solutions. Both results are in close agreement to each other. These comparisons confirm the validity and reliability of our finite-difference algorithm.

Though innovations for sustainable management of natural resources have emerged over time, the rising demand for nature based health solutions and integration of endemic flora into global value chains could have adverse impacts on ecosystems. The ecological risks in the exploitation of wild medicinal plant resources are exacerbated by a myriad of agrotechnological risks and challenges that highly constrain their domestication. Successful exploitation and commercialization of medicinal plants thus require a clear understanding of their demand and production systems or value chain analysis. Accordingly there is need for innovative approaches towards their integration into global value chains. Since quality and safety, traceability, certification, as well as, consumer tastes and preferences are critical drivers in purchasing decisions by global consumers, they are inadvertently exploited to weaken Indigenous knowledge (IK), undermine common property rights and entrench value chains that favour a few elite buyers. This tend to create pervasive incentives for overexploitation of medicinal plant resources and environmental degradation. Potential solution lies in the recognition of drivers of vulnerability to environmental degradation and the innovative use of policy bricolage, feedback loops and interactions between knowledge, power and agency on one hand, and collective action and property rights institutions on the other hand. We conceptualise a framework that can mediate a transformational agenda and enhance systematic understanding of sustainability lenses in endemic medicinal plant resources value chains. This could in turn strengthen IK, enhance collective action and promote participation of local actors with positive impact on the utilisation and integration of endemic medicinal plant resources into global value chains.

Short-term (hours) biological and biogeochemical processes cannot be fully captured by the current suite of polar-orbiting satellite ocean color sensors, as their temporal resolution is limited to potentially one clear image per day. Geostationary sensors, such as the Geostationary Ocean Color Imager (GOCI) from the Republic of Korea, allow the study of these short-term processes because their geostationary orbits permit the collection of multiple images throughout each day. To assess the capability to detect changes in water properties caused by these processes, however, requires an understaning of the uncertainties introduced by the instrument and/or geophysical retrieval algorithms. This work presents a study of the variability during the day over a water region of low-productivity with the assumption that only small changes in the water properties occur during the day over the area of study. The complete GOCI mission data were processed using the SeaDAS/l2gen package. Filtering criteria were applied to assure the quality of the data. Relative differences with respect to the midday value were calculated for each hourly observation of the day. Also, the influence of the solar zenith angle in the retrieval of remote sensing reflectances and derived products was analyzed. We determined that the uncertainties in water-leaving “remote-sensing” reflectance ($R_\text{rs}$) for the 412, 443, 490, 555, 660 and 680 nm bands on GOCI are 8.05$\times10^{-4}$, 5.49$\times10^{-4}$, 4.48$\times10^{-4}$, 2.51$\times10^{-4}$, 8.83$\times10^{-5}$, and 1.36$\times10^{-4}$ sr$^{-1}$, respectively, and 1.09$\times10^{-2}$ mg m$^{-3}$ for the chlorophyll-a concentration (Chl-{\it a}), 2.09$\times10^{-3}$ m$^{-1}$ for the absorption coefficient of chromophoric dissolved organic matter at 412 nm ($a_{\text{g}}(412)$), and 3.7 mg m$^{-3}$ for particulate organic carbon (POC). We consider these to be the floor values for detectable changes in the water properties due to biological, physical or chemical processes.

Risk attitudes are relevant factors affecting the production and investment decisions at farm level. They are key factors that are related to farmers’ attitudes towards environment and climate change. Several methodological approaches are available to measure the level of stated risk of an economic agent. The Multiple Price List (MPL) method is one of the methods that is gaining relevance. In this study we apply the MPL and relate the risk outcomes with farmers’ characteristics and their perception towards environment and climate change. Data was collected using a face to face survey carried out for a group of 370 agricultural producers of the irrigation district located in northwest of Mexico. Results showed an average risk of about 0.32, locating the agricultural producers of the region in a group with risk aversion, according to the MPL scale. The heterogeneity analysis showed that the socioeconomic factors and the perceptions towards climate change are related to the farmers´ stated risk level. Farmers who are young women with propensity to use public support to invest were shown to be greater risk lovers. Farmers in the region have perceived climate change to a greater extent like floods, hail, diseases and pests, and changing vegetation.

This study presents a novel approach for the early detection of developing thunderstorms. To date, methods for the detection of developing thunderstorms usually rely on accurate atmospheric motion vectors (AMVs) for the estimation of cooling rate of convective clouds, which corresponds to the updraft strength of the cloud objects. In this study we present a method for the estimation of the updraft strength that does not rely on AMVs. The updraft strength is derived directly from the satellite observations in the SEVIRI water vapor channels. For this purpose the absolute value of the vector product of two vectors derived from the observed radiances emitted by the water vapor channels in 2 subsequent satellite images is calculated. The x and y components of the vectors consists of the temporal change of the spatial brightness temperature gradients in x- and y-direction, the z component consists of the temporal variation of the brightness temperature at pixel level. The absolute value of the vector product is referred to as normalized updraft strength (NUS). The performance of the method has been investigated for 2 summer periods in 2016 and 2017 by validation with lightning data. Values of the Critical Success Index (CSI) of about 66 % for the 2016 period and 62 % for the 2017 period demonstrate the good performance of the method. The POD values for the experiments with the highest CSI values are 90.3 for 2016 period and 87.6 for the 2017 period, respectively The corresponding FAR values are 28.2% (2016) and 32.5 % (2017), respectively. In summary, the method has the potential to reduce the forecast lead time significantly, and can be quite useful in regions without a well maintained radar network.

The establishment of low carbon assessment initiatives is a crucial task especially at the city level. The determination of which source of carbon contributed more require robust data set and strategic approach. Hence, by using the campus as a small city approach, the establishment of carbon assessment and its’ reduction initiatives was required to keep track of the hotspot of the carbon source. The substantial amount of carbon source from campus operations such as energy consumption in the building, waste generation, and water consumption were identified. Moreover, as institutions of higher education, the execution of low carbon campus was initiated structurally involves the triangulation of research activities, teaching & learning and as well as campus operations or known as campus living lab approach. The application of low carbon cities framework, LCCF and assessment system enables to strategize the low carbon campus initiatives through the use of carbon footprint concept and the LCCF carbon track.

The present work focuses on fresh water signatures at the sediment-water interface (1 cm) using foraminiferal species in both austral winter and summer in eleven longitudinal transects on the Western South Atlantic continental margin between 27° and 37° S, at water depths of 11.7 to 250 m. Here we show that depth, salinity, temperature, oxygen, grain size (mud and sand percentage), suspended matter, organic matter, SiO₄, NO₂, and NO₃ in this order of importance are responsible for the distribution of foraminiferal species and thecamoebians. The presence of these microfossils indicate freshwater influx in four sectors over the continental shelf: Itajaí-Açu River, Laguna estuarine system, Patos Lagoon and RdlP (Rio de la Plata) will be explored further in detail. Our findings on freshwater signature on the continental shelf sediments through benthic species indicator are comparable to other continental systems worldwide, and a paleo record study would be useful for three South American countries (Brazil, Argentina and Uruguay). A freshwater signature in the continental shelf indicates deposition sites probably linked to anthropogenic impact since most of the pollutants and contaminants are dumped into water bodies that eventually reach and accumulate in the ocean. Therefore, the freshwater-related species on the continental shelf reflects exactly where the depositional sediment sites are, and where anthropogenic impacts accumulate. Foraminiferal microhabitat occupation within these zones is discussed in detail. And we conclude that together with the fauna, the abiotic parameters play an important role in determining the occurrence and degree of marine eutrophication induced by the input of polluted river waters, also showing possible anoxic environments on the shelf.

Using a three-dimensional, hydrostatic, primitive-equation ocean model, this study investigates the dynamics of lateral circulation in a partially stratified tidal inlet, the Barataria Pass in the Gulf of Mexico, over a 25.6-hour diurnal tidal cycle. Model performance is assessed against observational data. During flood tide, the lateral circulation exhibits the characteristics similar to that induced by differential advection, i.e., lateral flow consists of two counter-rotating cells and is convergent at the surface. The analysis of momentum balance indicates that, in addition to the pressure gradient and vertical stress divergence, nonlinear advection and horizontal stress divergence are also important contributors. During ebb phase, the lateral circulation is mostly eastward for the whole water column and persisting for almost the whole period. The surface divergence suggested by the differential advection mechanism lasts for a very short period, if it ever exists. The main momentum balance across most of the transect during ebb is between the along-channel advection of cross-channel momentum and pressure gradient. The sectional averaged lateral velocity magnitude during ebb is comparable to that during flood, which is different from the idealized numerical experiment result.

The diagnostics of natural landscapes geoecological state in the course of the permafrost zone economic development should be based on the assessment of the destructive cryogenic processes formation. It is expedient to consider it in terms of landscapes resistance to cryogenic processes increase. The choice of lithocryogenic stability parameters is substantiated. These are: permafrost distribution over the area, its annual mean temperature and ice content, protective properties of the vegetation and etc. Cryogenic processes activation is estimated with regard to their area, development rate and attenuation, natural landscapes damage, hazard for engineering facilities operation. The assessment procedure, and the way of improving expert numerical scores are shown. At Geography Faculty of Lomonosov Moscow State University, the authors have developed a number of the approved methods of making evaluation maps of different scales applying the methods of landscape indication, modern methods of space images decoding, methods of expert scores, the method statistical calculations and methods of spatial GIS-analysis. The technique of Atlas geo-information mapping on the landscape basis has been introduced in seven atlases at scales from 1:3 000 000 to 1:20 000 000. These maps are widely used in design and survey organizations and in education.

The rapid urbanization that takes place in developing regions such as Sub-Saharan Africa is associated with a large range of environmental and social issues. In this context, remote sensing is essential to provide accurate and up-to-date spatial information to support risk assessment and decision making. However, mapping urban areas remains a challenge because of their heterogeneity, especially in developing regions where the highest rates of misclassification are observed. Nevertheless, urban areas located in arid climates --- which are among the most vulnerables to anthropogenic impacts, suffer from the spectral confusion occurring between built-up and bare soil areas when using optical imagery. Today, the increasing availability of satellite imagery from multiple sensors allow to tackle the aforementioned issues by combining optical data with Synthetic Aperture Radar (SAR). In this paper, we assess the complementarity of the Landsat 8 and Sentinel-1 sensors to map built-up areas in twelve Sub-Saharan African urban areas, using a pixel-level supervised classification based on the Random Forest classifier. We make use of textural information extracted from SAR backscattering data in order to reduce the speckle noise and to introduce contextual information at the pixel level. Results suggest that combining both optical and SAR features consistently improves classification performances, mainly by enhancing the differentiation between built-up and bare lands. However, the fusion was less beneficial in mountainous case studies, suggesting that including features derived from a Digital Elevation Model (DEM) could improve the reliability of the proposed approach. As suggested by previous studies, combining features computed from both VV and VH polarizations consistently led to better classification performances. On the contrary, introducing textures computed from different spatial scales did not improve the classification performances.

Electronic Nose (eNose) systems are particularly appreciated for their portability, usability, relative low cost and real-time or near real-time response. Their application finds space in several domains, including environmental monitoring. Within this field, marine monitoring is of particular scientific relevance due to the fragility of this specific environment, daily threatened by human activities that can potentially bring to catastrophic and irreversible consequences on marine wildlife. Under such considerations, a systematic review, complying with the PRISMA guidelines, was conducted covering the period up to October 15, 2018, in PubMed, ScienceDirect and Google Scholar. Despite the relatively low number of articles published on this specific topic and the heterogeneity of the technological approaches employed, the results obtained by the various groups highlight the positive contribution eNose has given and can provide in near future for the monitoring and safeguarding of this delicate environment.

Data on the atmospheric gas concentrations can be received with high efficiency and on a large spatial scale only from remote laser sounding instruments. The remote laser techniques with the use of lidars are widely used in the study of the atmosphere and control of its state. The aims of this work are the design and test in numerical and field experiments of a DIAL OPO lidar system based on KTA and KTP crystals for gas analysis of the atmosphere. Lidar measurements of atmospheric gases in the near/mid infrared region have been numerically simulated. The differential absorption lidar system based on optical parametric oscillators with nonlinear KTA and KTP crystals which allow laser radiation tuning both in the near and in the middle IR spectral region is described; it allows tuning laser radiation in the near/mid-IR wavelength regions. Lidar echo signals have been experimentally recorded in the 1.8–2.5 and 3–4 m wavelength ranges. The results of H2O and CO2 profile measurements along the surface sounding path are presented.

A forecasting scheme of the thermal updraft velocity based on a theoretical model and data collected from flights records at gliding competitions, is presented. The forecasting scheme was based on the hypothesis that there is linear relationship between the overheat function at ground surface and the temperature difference between soil and air. The proportionality factor of this relationship was determined experimentally using observations recorded during gliding flights. The results showed that based on this simple scheme forecasting thermal convection is possible at any geographical location.

Polar mesocyclones (MCs) are small marine atmospheric vortices. The class of intense MCs, called polar lows, are accompanied by extremely strong surface winds and heat fluxes and thus largely influencing deep ocean water formation in the polar regions. Accurate detection of polar mesocyclones in high-resolution satellite data, while challenging, is a time-consuming task, when performed manually. Existing algorithms for the automatic detection of polar mesocyclones are based on the conventional analysis of patterns of cloudiness and involve different empirically defined thresholds of geophysical variables. As a result, various detection methods typically reveal very different results when applied to a single dataset. We develop a conceptually novel approach for the detection of MCs based on the use of deep convolutional neural networks (DCNNs). As a first step, we demonstrate that DCNN model is capable of performing binary classification of 500x500km patches of satellite images regarding MC patterns presence in it. The training dataset is based on the reference database of MCs manually tracked in the Southern Hemisphere from satellite mosaics. We use a subset of this database with MC diameters falling in the range of 200-400 km. This dataset is further used for testing several different DCNN setups, specifically, DCNN built “from scratch”, DCNN based on VGG16 pre-trained weights also engaging the Transfer Learning technique, and DCNN based on VGG16 with Fine Tuning technique. Each of these networks is further applied to both infrared (IR) and a combination of infrared and water vapor (IR+WV) satellite imagery. The best skills (97% in terms of the binary classification accuracy score) is achieved with the model that averages the estimates of the ensemble of different DCNNs. The algorithm can be further extended to the automatic identification and tracking numerical scheme and applied to other atmospheric phenomena characterized by a distinct signature in satellite imagery.

Low carbon cities are increasingly forming a distinct strand of sustainability literature. Models have been developed to measure the performance of low carbon cities. The purpose of this paper is to formulate a strategy-based model to evaluate current performance and predict future conditions of low carbon cities. It examines the dynamic interrelationships between key performance indicators (KPIs), induces changes to city plan targets and then instantly predicts the outcome of these changes. Designed generic and flexible, the proposed model shows how low carbon targets could be used to guide the transformation of low carbon cities under four strategies: (1) passive intervention, (2) problem solving, (3) trend modifying and (4) opportunity seeking. Further, the model has been applied to 17 cities and then tested on 5 cities: London, New York, Barcelona, Dubai and Istanbul. The paper concludes with policy implications to realign city plans and support low carbon innovation.

Flash flooding, a hazard which is triggered by heavy rainfall is a major concern in many regions of the world often with devastating results in mountainous elevated regions. We adapted remote sensing modelling methods to analyse one flood in July 2015, and believe the process can be applicable to other regions in the world. The isolated thunderstorm rainfall occurred in the Chitral River Basin (CRB), which is fed by melting glaciers and snow from the highly elevated Hindu Kush Mountains (Tirick Mir peak’s elevation is 7708 m). The devastating cascade, or domino effect, resulted in a flash flood which destroyed many houses, roads, and bridges and washed out agricultural land. CRB had experienced devastating flood events in the past, but there was no hydraulic modelling and mapping zones available for the entire CRB region. That is why modelling analyses and predictions are important for disaster mitigation activities. For this flash flood event, we developed an integrated methodology for a regional scale flood model that integrates the Tropical Rainfall Measuring Mission (TRMM) satellite, Geographic Information System (GIS), hydrological (HEC-HMS) and hydraulic (HEC-RAS) modelling tools. We collected and use driver discharge and flood depth observation data for five river sub-stream areas, which were acquired in cooperation with the Aga Khan Rural Support Program (AKRSP) organization. This data was used for the model’s calibration and verification. This modelling methodology is applicable for other regional studies especially for rough mountainous areas which lack local observations and river discharge gauges. The results of flood modelling are useful for the development of a regional early flood warning system and flood mitigation in hazardous flood risk areas. The flood simulations and prepared connected video visualization can be used for local communities. This approach is applicable for flood mitigation strategies in other regions.

Zircon xenocrysts from alkali basalts in Ratanakiri Province, Cambodia, represent a unique low-Hf zircon, within a 12,000 km long Indo-Pacific megacryst zone. Colourless, yellow, brown and red crystals ({100}, {101}, subordinate {211}, {1103}), with hopper growth and corrosion features, range up to 20 cm in size. Zircon chemistry implicates juvenile, Zr-saturated, mantle-derived alkaline melt (Hf 0.6–0.7 wt%, Y <0.2 wt%, U+Th+REE <600 ppm, Zr/Hf 66–92, Eu/Eu*_N ~ 1, positive Ce/Ce*_N, HREE enrichment). Incompatible element depletion with increasing Yb/Sm_N from core to rim at ~ constant Hf suggests single stage growth. Ti-in-zircon temperatures (~570–740 °C) are lower than predicted by crystal morphology (800–900 °C) and decrease from core to rim (D_T = 10–50 °C). The d¹⁸O values (4.88 to 5.01‰ VSMOW) are relatively low for xenocrysts from the zircon Indo-Pacific zone (ZIP). The ¹⁷⁶Hf/¹⁷⁷Hf values (+ εHf 4.5–10.2) give T_{Depleted Mantle} model source ages of 260–462 Ma and T_Crustal ages of 391–754 Ma. The source magmas reflect variably depleted lithospheric mantle with little supracrustal input. Zircon U-Pb (0.88–1.56 Ma) and (U-Th)/He (0.86–1.02 Ma) ages are older than host basalt ages (~0.7 Ma), suggesting limited residence before transport. Zircon genesis suggests Zr-saturated, Al-undersaturated, carbonatitic-influenced, low-degree partial melting (<1%) of peridotitic mantle at ~60 km beneath the Indochina terrane.