Review
Version 1
Preserved in Portico This version is not peer-reviewed
The Hardness of Additively Manufactured Alloys
Version 1
: Received: 4 October 2018 / Approved: 5 October 2018 / Online: 5 October 2018 (10:00:36 CEST)
A peer-reviewed article of this Preprint also exists.
Zuback, J.; DebRoy, T. The Hardness of Additively Manufactured Alloys. Materials 2018, 11, 2070. Zuback, J.; DebRoy, T. The Hardness of Additively Manufactured Alloys. Materials 2018, 11, 2070.
Abstract
The rapidly evolving field of additive manufacturing requires a periodic assessment of the progress made in understanding the properties of metallic components. Although extensive research has been undertaken by many investigators, the data on properties such as hardness from individual publications are often fragmented. When these published data are critically reviewed, several important insights that cannot be obtained from individual papers become apparent. We examine the role of cooling rate, microstructure, alloy composition, and post process heat treatment on the hardness of additively manufactured components. Hardness data for steels and aluminum alloys processed by additive manufacturing and welding are compared to understand the relative roles of manufacturing processes. Furthermore, the findings are useful to determine if a target hardness is easily attainable either by adjusting AM process variables or through appropriate alloy selection.
Keywords
Additive manufacturing; Microstructure; Hardness; Mechanical properties; Aluminum alloys; Steels; Nickel alloys; Titanium alloys
Subject
Chemistry and Materials Science, Metals, Alloys and Metallurgy
Copyright: This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Comments (0)
We encourage comments and feedback from a broad range of readers. See criteria for comments and our Diversity statement.
Leave a public commentSend a private comment to the author(s)
* All users must log in before leaving a comment