In-wheel motor vehicles are gaining attention as a new type of electric vehicle due to their efficient power units located inside each wheel hub. However, they are more susceptible to wheel resonance due to the increase in unsprung mass caused by the motor's weight. This can result in decreased both the ride comfort and driving stability. To resolve this issue, this study aims to apply an optimal switching controller with a semi-active n actuator; magnetorheological (MR) damper. For the implementation of the optimal switching controller, a road type classification is also carried out. An acceleration sensor is used for road type classification, and control logics include a ride comfort controller; the linear quadratic regulator (LQR _Paved Road) and a wheel motion controller (LQR_Off Road) for improved driving stability. For paved roads, the LQR_Paved Road control input is applied to the MR damper. However, if a road type prone to wheel resonance is detected, the control logic switches to the LQR_Off Road. During the transition, a weighted average of both LQR_ Paved Road and LQR_Off Road control input is applied to the actuator. Computer simulations are undertaken to evaluate vibration control performance, including the ride comfort and driving stability at various road profiles.

Magnetorheological (MR) fluid is recognized as one of intelligent materials that is widely used for various kinds of controllable devices since its rheological characteristics can be controlled by an external magnetic field (or input current). However, the density mismatch of the compositions between iron particles and carrier oil leads to inevitable sedimentation. Therefore, many works on the sedimentation problem of MR fluids have been carried out to improve the sedimentation stability using appropriate additives, surfactants, nanoparticles, particle coating as well as using several carrier oils with different densities. However, a study on the effect of the current magnitudes and profiles on the sedimentation is considerably rare. This study experimentally investigates the sedimentation behaviors due to the different current magnitudes and different profiles such as square and sine wave. It is shown that average sedimentation rate is 98.61% by applying 1 A of the square wave, while it is 97.83% under the sine type of the current. It is also identified that the higher intensity of the applied current results in stronger electromagnetic which can slow down the sedimentation rate. The results presented in this work are very helpful in designing a controller which provides the input current in terms of the magnitude and profile configuration.

The aim of this work is to study the phase transformations, microstructures and mechanical properties of the martensitic stainless steel (MSS) 410 deposits produced by laser powder-directed energy deposition (LP-DED) additive manufacturing. The LP-DED MSS 410 deposits underwent the post heat treatment in austenitizing at 980℃ for 3hrs and followed by different tempering treatment at the temperatures of 250, 600, and 750℃ for 5hrs, respectively. The analyses of phase transformations and microstructural evolutions of LP-DED MSS 410 were carried out using X-ray diffraction, SEM-EDS, and EBSD. Vickers hardness and tensile strength properties were also measured to analyze the effects of the different tempering heat treatments. It reveals that as-built MSS 410 has very fine lath martensite and high hardness of about 480HV1.0 and tensile strength of about 1280 MPa, but elongation was very lower than the post heat treated ones. Precipitations of chromium carbide (Cr23C6) were most commonly observed at the grain boundaries and the entire matrix at the tempering temperatures of 600℃ and 750℃. In general, the tensile strengths de-creased from 1381MPa to 688MPa as tempering temperatures increased up to 750℃ from 250℃. Additionally, as the tempering temperature increased, the chromium carbide and tempered mar-tensite structures became coarser.

Using morphological characteristics and SSR markers, we evaluated the morphological and genetic variation of 200 Perilla accessions collected from the five regions of South Korea and other region. In morphological characteristics analysis, particularly, leaf color, stem color, degree of pubescence, leaf size were found to be useful for distinguishing the characteristics of native Perilla accessions cultivated in South Korea. A total of 137 alleles were identified in the 20 simple sequence repeat (SSR) markers, and the number of alleles per locus ranged from 3 to 13, and the average number of alleles per locus was 6.85. The average gene diversity (GD) was 0.649, with a range of 0.290-0.828. From analysis of SSR markers, accessions from the Jeolla-do and Gyeongsang-do regions showed comparatively high genetic diversity values compared with those from other regions in South Korea. In the unweighted pair group method with arithmetic mean (UPGMA) analysis, the 200 Perilla accessions were found to cluster into three major groups and an outgroup with a genetic similarity of 42%, and did not showed a clear geographic structure from the five regions of South Korea. Therefore, it is believed that landrace Perilla seeds are frequently exchanged by farmers through various routes between the five regions of South Korea. The results of this study are expected to provide useful information for conservation of these genetic resources and selection of useful resources for the development of varieties for seeds and leafy vegetables of cultivated var. frutescens of Perilla crop in South Korea.

The study of blowfly (Diptera: Calliphoridae) biodiversity and distribution is crucial for forensic investigations. Abiotic and biotic factors, such as seasonal and habitat type, have significant impact on blowfly populations. However, only a few forensic entomology studies have been conducted in South Korea, particularly in the Gyeongsangnam-do region. To address this, an extensive year-long survey was conducted to analyze the compositions, habitat preferences, distribution, and seasonal abundance of forensically relevant blowflies in urban and forested habitats of Gyeongsangnam-do, utilizing mouse carcass-baited traps set for 48 h each month. A total of 3,478 adult blowflies were recorded, encompassing six genera and 14 species, with a noted absence of specimens during the winter months. The predominant species was Lucilia porphyrina, accounting for 37.1% of the total sample, followed by Chrysomya pinguis (27.5%), Lucilia sericata (7.6%), and Lucilia illustris (7.1%). The species composition was consistent across all surveyed regions; however, seasonal variation in species diversity was evident, with a peak in spring and a decline in summer. Notably, certain species exhibited clear preferences for either urban (Calliphora calliphoroides and L. sericata) or forested habitats (L. porphyrina and Ch. pinguis). This pioneering study elucidates the diverse blowfly communities in Gyeongsangnam-do, highlighting significant seasonal and habitat-dependent variations. These findings enrich our understanding of blowfly ecology in this region, offering valuable insights for forensic applications and underscoring the necessity for ongoing entomological surveillance and research.

Resistance of tumor cells to anticancer drugs is a major obstacle in tumor therapy. In this study, we investigated the mechanism of cordycepin-mediated resensitization to cisplatin inT24R2, a derived T24 cell line. Treatment with cordycepin or cisplatin (2 g/ml) alone could not induce cell death of T24R2, but combination treatment of these drugs significantly induced apoptosis of the cells through mitochondrial pathway including depolarization of mitochondrial membrane, decrease of anti-apoptotic proteins, Bcl-2, Bcl-xL, and Mcl-1, and increase of pro-apoptotic proteins, Bak and Bax. . High expression of MDR1 was the cause of cisplatin resistance in T24R2, and cordycepin significantly reduced MDR1 expression through inhibition of MDR1 promoter activity. MDR1 promoter activity was dependent on a transcription factor, Ets-1, in T24R2 cells. Although there is a correlation between MDR1 and Ets-1 expression in bladder cancer patients, active Ets-1, Thr-38 phosphorylated form (pThr-38), was critical to induce MDR1 expression. Cordycepin decreased pThr-38 Ets-1 level through inhibition of AKT, which reduced MDR1 transcription and induced the resensitization of T24R2 to cisplatin. The results suggest that cordycepin effectively resensitizes cisplatin-resistant bladder cancer cells to cisplatin, thus serving as a potential strategy for treatment of anti-cancer drug resistant patients.