The field of smart materials is attaining global industrial importance rapidly. The ionic polymer metal metaIl composites withheld there importance in this field. They are not only used as biocompatible devices but also in the field of thin and conformal bio coatings. The nafion 117 is unstable at elevated temperatures and its water intake resistance is low, so the nafion 117 is coated with the noble material to increase its thermal stability and water resistant property. The high cost of noble metal make its too costly to use in day to day applications so parylene has been used as substitute for noble metal in order to reduce the cost. The high thermal stability and water intake property if parylene make its suitable for the same. Multiple chemical treatments like plasma ionization and others have been done on the parylene coated nafion to increase its desirable properties considerably. The low adhesion rate between parylene and nafion 117 has been increased upto the certain extend by the use of ionized plasma. This paper reviewed the plasma chemical treatment of paryelene coatings for the biocompatible devices and provides an insight knowledge on classification, structure and thermal stability of the parylene coatings

Retinal pigment epithelium (RPE) replacement therapy is evolving as a feasible approach to treat age-related macular degeneration (AMD). In majority of the preclinical studies, RPE cells are transplanted as cell suspension into immunosuppressed animal eyes and transplant effects were monitored only short-term. We investigated long-term effects of human iPSC derived RPE transplants in immunodeficient Royal College of Surgeons (RCS) rat model, in which RPE dysfunction lead to photoreceptor degeneration. iPSC-RPE cultured as polarized monolayer on nanoengineered ultrathin parylene C scaffold was transplanted into the subretinal space of 28-day old immunodeficient RCS rat pups and evaluated after 1, 4 and 11 months. Assessment at early time points showed good iPSC-RPE survival. The transplants remained as a monolayer, expressed RPE specific markers, performed phagocytic function and contributed to vision preservation. At 11-month post-implantation, RPE survival was observed only in 50% of the eyes that were concomitant with vision preservation. Loss of RPE monolayer characteristics at the 11month time point was associated with peri-membrane fibrosis, immune reaction through activation of macrophages (CD 68 expression) and transition of cell fate (expression of mesenchymal markers). The overall study outcome supports the therapeutic potential of RPE grafts despite the loss of some transplant benefits during long-term observations.

A portable urea sensor for use in the fast flow condition was fabricated using porous polytetrafluoroethylene (PTFE) membranes coated with amine-functionalized parylene, parylene-A, by vapor deposition. To generate a specific electrochemical sensor signal from urea, the urea-hydrolyzing enzyme urease was immobilized on the parylene-A-coated PTFE membranes via chemical crosslinking using glutaraldehyde. The urease-immobilized membranes were assembled in a polydimethylsiloxane (PDMS) fluidic chamber, and a screen-printed carbon three-electrode system was used for electrochemical measurements. The success of urease immobilization was confirmed using fluorescence microscopy, scanning electron microscopy, and Fourier-transform infrared spectroscopy. The optimum concentration of urease for immobilization on the parylene-A-coated PTFE membranes was determined to be 48 mg/mL, and the optimum number of membranes in the PDMS chamber was found to be 8. Using these optimized conditions, we fabricated the urea biosensor and monitored urea samples under various flow rates ranging from 0.5 to 10 mL/min in the flow condition using chronoamperometry. To test the applicability of the sensor for physiological samples, we used it for monitoring urea concentration in the waste peritoneal dialysate of a patient with chronic renal failure, at a flow rate of 0.5 mL/min.