Background. We aimed to assess the validity of the Mat-O-Covid Job Exposure Matrix (JEM) on SARS-CoV2 using compensation data from the French National Health Insurance compensation system for occupational-related COVID-19. Methods. Deidentified compensation data for occupational COVID-19 in France were obtained between August 2020 and August 2021. The acceptance was considered as the reference. Mat-O-Covid is an expert based French JEM on workplace exposure to SARS-CoV2. Bivariate and multivariate models were used to study the association between the exposure assessed by Mat-O-Covid and the reference, as well as the Area Under Curves (AUC), sensitivity, specificity, predictive values, and likelihood ratios. Results. In the 1140 cases included, there was a close association between the Mat-O-Covid index and the reference (p<0.0001). The overall predictivity was good, with an AUC of 0.78 and an optimal threshold at 13 per thousand. Using Youden’s J statistic resulted in 0.67 sensitivity and 0.87 specificity. Both positive and negative likelihood ratios were significant: respectively 4.9 [2.4-6.4] and 0.4 [0.3-0.4]. Discussion. It was possible to assess Mat-O-Covid’s validity using data from the national compensation system for occupational COVID-19. Though further studies are needed, Mat-O-Covid exposure assessment appears to be accurate enough to be used in research.

An in-depth study of the failure of granular materials, which is known as a mechanism to generate defects, can reveal the facts about the origin of the imperfections such as cracks in the carbon anodes. The initiation and propagation of the cracks in the carbon anode, especially the horizontal cracks below the stub-holes, reduce the anode efficiency during the electrolysis process. In order to avoid the formation of cracks in the carbon anodes, the failure analysis of coke aggregates can be employed to determine the appropriate recipe and operating conditions. In this paper, it will be shown that a particular failure mode can be responsible for the crack generation in the carbon anodes. The second-order work criterion is employed to analyze the failure of the coke aggregate specimens and the relationships between the second-order work, the kinetic energy, and the instability of the granular material are investigated. In addition, the coke aggregates are modeled by exploiting the discrete element method (DEM) to reveal the micro-mechanical behavior of the dry coke aggregates during the compaction process. The optimal number of particles required for the failure analysis in the DEM simulations is determined. The effects of the confining pressure and the strain rate as two important compaction process parameters on the failure are studied. The results reveal that increasing the confining pressure enhances the probability of the diffusing mode of the failure in the specimen. On the other hand, the increase of strain rate augments the chance of the strain localization mode of the failure in the specimen.

The COVID-19 pandemic has great adverse impacts on personal life, the U.S. economy, and the world economy. Freezing all human activities is not a sustainable measure. Thus we want to develop a public intervention framework that allows people to resume personal and economic activities. In this article, we examined transmission routes, disease severity, personal vulnerability, available treatments, and person-person interactions to establish a general public intervention framework. We divide people into risk groups, non-risk group and group that may serve as viral transmitters, explore interactions between individual persons within each group and between different groups, and propose interaction behavior modifications to mitigate viral exposures. For the non-risk groups, we identified preventive measures that can help them avoid the most serious exposures and infections that pose higher death risks. The invention measures for the vulnerable groups include prior-exposure measures, heightened protective measures, interaction behavior changes, post-exposure remedial measures, and multiple factors treatments to reduce death and disability risks. The multiple interventions and two-ways defensive behavior modifications are expected to result in reduced rate of detectable infections and lowered disease severity for the vulnerable groups. In this framework, most human activities and economic activities can continue as normal. With time passing, the population acquires population immunity against the COVID-19 virus. Implementation of this intervention framework requires considerable resources and governmental effects while the multiple factors treatment protocol requires the support of health care professionals.

By the study of the pattern book Ying Zao Fa Shi (building regulations of Song Dynasty, 1103 AD), while analyzing the combining and dimensioning rule of timber framework and tile work, a model self-generating program has been compiled for the first time. The operating framework has been firstly defined, while solving the issues of clustering principle, connecting method, output classification, etc. with the detailed description of algorithm theory. Taking the corner bracket set and nine-ridge roof for example, after the compilation and debug by Grasshopper, according to various input parameters, various models have been generated automatically by the plugin, proving the velocity and the veracity of the algorithm.

In graduate programs such as social work, field education is the signature pedagogy of education. As such, student placement with an appropriate field education agency is critical to ensure academic success and career readiness. A variety of Learning Management System (LMS) and Integrated Planning and Advising Service (IPAS) technologies have been developed to fully integrate technology into the educational system and streamline and improve the learning experience for students, educators, and administrators. Few (if any) of the existing solutions have capabilities to match students with field educators on the basis of an individual student’s completed coursework and area of specialization, as well as field educator needs and opportunities. This paper describes our experience developing a custom LMS/IPAS system—the School of Social Work information System (SSWiS)—that was designed specifically for student learning, faculty advising, and academic administration within our social work graduate program. We present the challenges that motivated the design of the SSWiS before describing the architecture and functionality of our solution. We then discuss our preliminary evaluation results. We conclude with a discussion of the benefits and limitations of our system in the context of today’s technical needs in graduate education in social work and other fields.

Background: The epidemiological situation generated by COVID-19 has cast into sharp relief the delicate balance between public health priorities and the economy, with businesses obliged to toe a line between employee health and continued production. In an effort to detect as many cases as possible, isolate contacts, cut transmission chains and limit the spread of the virus in the workplace, mass testing strategies have been implemented in both public health and industrial contexts to minimize the risk of disruption in activity. Objective: To evaluate the economic impact of mass workplace testing strategy as carried out by a large automotive company in Catalonia in terms of health and healthcare resource savings. Methodology: Analysis of health costs and impacts based on the estimation of mortality and morbidity avoided because of screening and the resulting savings in healthcare costs. Results: The economic impact of the mass workplace testing strategies (using both PCR and RAT tests) was approximately €10.44 per test performed or €5,575.49 per positive detected. 38% of this figure corresponds to savings derived from better use of health resources (hospital beds, ICU beds and follow-up of infected cases), while the remaining 62% corresponds to improved health rates due to avoided morbidity and mortality. In scenarios with higher positivity rates and a greater impact of the infection on health and the use of health resources, these results could be up to ten times higher (€130.24 per test performed or €69,565.59 per positive detected). Conclusion: In the context of COVID-19, preventive actions carried out by the private sector to safeguard industrial production also have concomitant public benefits in the form of savings in healthcare costs. Thus, governmental bodies need to recognize the value of implementing such strategies in private settings and facilitate them through, for example, subsidies.

This article integrates existing theory from distributed computing and cryptology with anecdotal material from the cryptocurrency industry, to provide a comprehensive description of the minimum requirements of the hypothetical academic blockchain. The paper argues that such a community could significantly reduce the biases and misconduct that now exist in the academic peer review process. Theory suggests such a system could operate effectively as a distributed encrypted telecommunications network where nodes are anonymous, do not trust each other, and there is minimal central authority. To incentivize the academic community to join such a proposed community, the paper proposes a pseudo-cryptocurrency called litcoin (literature coin). This litcoin-based system would create economic scarcity based on proof of knowledge (POK), which is a synthesis of the proof of work (POW) mechanism used in bitcoin, and the proof of stake (POS) mechanism used in various altcoin communities. The paper argues that the proposed POK system would enable the academic community to more effectively develop the research it finds valuable.

Background: Globally, women’s responsibility for unpaid care work (UCW) remains a barrier to gender equality and women’s empowerment. Rwanda, a low-income country, has a legal and policy framework for promoting gender equality but remains a patriarchal society with women responsible for UCW. Reseaux des Femmes, a local NGO, has been delivering a programme targeted at reducing and redistributing the UCW of women with the objective of gender transformational change. However, there has been no impact evaluation of their intervention to date. Methods/Design: The impact evaluation will be a proof-of-concept critical realist cluster control trial (CRcCT) to evaluate for which women, how and under what circumstances the intervention reduces and redistributes women’s UCW, promote gender equality and women’s empowerment, and improves women’s quality of life. Four clusters of villages in each of five districts in Rwanda will be randomly allocated to the intervention or control arms, and all eligible households, those headed by a couple with at least one child under 12 years, will be recruited. This will yield a sample of around 550 intervention households and 550 control. Discussion: This protocol describes the design of mixed-methods research to evaluate an intervention in Rwanda aimed at reducing and redistributing the time women spend on UCW, thereby promoting gender equality and women’s empowerment. This paper will contribute to our understanding of interventions for transforming gender relations from a scholarly perspective. From a policy perspective, it will act as a proof of concept of Reseaux des Femmes’ Programme.

Research has consistently found that people with mental illness (known as consumers) experience lower levels of participation in meaningful activities, which can limit their opportunities for recovery support. The aim of this study was to describe the outcomes of participation in a group program designed to address all stages of activity participation, known as Pathways to Participation (P2P). A descriptive longitudinal design was utilized, collecting data at three time points. Outcomes were measured by the Camberwell Assessment of Need Short Appraisal (CANSAS), Recovery Assessment Scale – Domains and Stages (RAS-DS), Behaviour and Symptom Identification Scale (BASIS-24), Living in the Community Questionnaire (LCQ) and time use diaries. All data was analysed using descriptive statistics, and Chi square analyses. Seventeen consumers completed baseline data, eleven contributed post program data and eight provided follow up data. Most were female (63.64%) and had been living with mental illness for 11.50 (± 7.74) years on average. Reductions in unmet needs and improvements in self-rated recovery scores were re-ported, but no changes were identified in either time use or psychosocial health. The findings indicate the P2P program may enable consumers to achieve positive activity and participation out-comes as part of their personal recovery.

The tribological performance of metalwork steel tools is of vital importance in both cold and hot working processes. One solution for improving metal tool life is the application of coatings. This paper investigates the effect of CrAlSiN thin-film PVD-deposition on the tribological behaviour of tool steel K340. The sliding wear performance of the coated K340 steel is analysed in relation to both the uncoated K340 steel and a range of tool steels dedicated to hot- and cold-working, such as X155CrVMo12-1, X37CrMoV5-1, X40CrMoV5-1, 40CrMnMo7 and 90MnCrV8. The investigated tool steels were heat-treated, while K340 was subjected to thermochemical treatment and then coated with a CrAlSiN hard film (K340/CrAlSiN). The hardness, chemical composition, phase structure and microstructure of steels K340 and K340/CrAlSiN are examined. Tribological tests were conducted using the ball-on-disc tester in compliance with the ASTM G99 standard. The tests were performed under dry unidirectional sliding conditions, using an Al2O3 ball as a counterbody. The wear factor and coefficient of friction are estimated and analysed with respect to hardness and alloying composition of the materials under study. SEM observations are made to identify the sliding wear mechanisms of the analysed tool steels and PVD-coated K340 steel. In contrast to the harsh abrasive-adhesive wear mechanism observed for uncoated tool steels, the abrasive wear dominates in case of the AlCrSiN. The deposited thin film effectively prevents the K304 substrate from harsh wear severe degradation. Moreover, thanks to the deposited coating, the K304/CrAlSiN sample has a COF of 0.529 and a wear factor of K=5.68×10−7 m3 N−1 m−1, while the COF of the reference tool steels ranges from 0.702 to 0.885 and their wear factor ranges from 1.68×10−5 m3 N−1 m−1 to 3.67×10−5 m3 N−1 m−1. The CrAlSiN deposition reduces the wear of the K340 steel and improves its sliding properties, which makes it a promising method for prolonging the service life of metalwork tools.

Forces and mechanical energy are prevalent in living cells. This may be because forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various other forms of energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

The study of coordination practices in health policy and, especially in emergency situations is a central aspect. The COVID-19 pandemic has highlighted the need for further research on such practices, especially those that are deployed in complex and unforeseen situations to respond quickly while minimising errors. These dialogic coordination practices (DP) have been identified through case studies but have not been validated. The purpose of this study is to develop and validate a DP questionnaire for healthcare teams. The development of the items was based on a literature review and the content validation was carried out by means of a Delphi study. A total of 10 experts assessed the clarity and appropriateness of the items and their corresponding measurement scales. Consensus was reached after the second round, with a percentage of agreement greater than or equal to 90% for all items. The validation of these items constitutes a methodological innovation that responds to the call in the literature to open up new avenues for comparative studies, the possibility of generalising the findings obtained and the possibility of bringing together different approaches to the problem of coordination, key in health policy.

Spiritual intelligence had an impact on different biblical leaders, and in this text, we see some cases to serve as a sample (Joseph, Bezalel, and Daniel). In the Bible, this impact is demonstrated in innovations introduced by Joseph in Egypt, Bezalel the manager of the macro project of building in crisis time, Daniel the politician. It is the supreme intelligence and leaders are invited to make a shift from rationality to spirituality. The more leaders of organizations will use spiritual intelligence, the more leaders and followers will experience satisfaction, joy, accomplishment.

The construction of molecular robotic-like objects that imitate living things is an important challenge for current chemists. Such molecular devices are expected to perform their duties robustly to carry out mechanical motion, process information, and make independent decisions. Dissipative self-organization plays an essential role in meeting these purposes. To produce a micro-robot that can perform the above tasks autonomously as a single entity, a function generator is required. Although many elegant review articles featuring chemical devices that mimic biological mechanical functions have been published recently, the dissipative structure, which is the minimum requirement, has not been sufficiently discussed. This article aims to show clearly that dissipative self-organization is a phenomenon involving autonomy, robustness, mechanical functions, and energy transformation. Moreover, the author details the recent experimental results of an autonomous light-driven molecular device that achieves all of these features. In addition, a chemical model of cell-amplification is also discussed to focus on the generation of hierarchical movement by dissipative self-organization. By reviewing this research, it may be perceived that mainstream approaches to synthetic chemistry have not always been appropriate. In summary, the author proposes that the integration of catalytic functions is a key issue for the creation of autonomous microarchitecture.

Mechanical forces and mechanical energy are prevalent in living cells. This may be because mechanical forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various forms of chemical energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Restricted feeding is well known to affect expression profiles of both clock and metabolic genes. However, it is unknown whether these changes in metabolic gene expression result from changes in the molecular clock or in feeding behavior. Here we eliminated the daily rhythm in feeding behavior by providing 6-meals evenly distributed over the light/dark-cycle. Animals on this 6-meals-a-day feeding schedule retained the normal day/night difference in physiological parameters including body temperature and locomotor activity. The daily rhythm in respiratory exchange ratio (RER), however, was significantly phase-shifted through increased utilization of carbohydrates during the light phase and increased lipid oxidation during the dark phase. This 6-meals-a-day feeding schedule did not have a major impact on the clock gene expression rhythms in the master clock but did have mild effects on peripheral clocks. By contrast, genes involved in glucose and lipid metabolism showed differential expression. Concluding, eliminating the daily rhythm in feeding behavior in rats does not affect the master clock and only mildly affects peripheral clocks, but disturbs metabolic rhythms in liver, skeletal muscle and brown adipose tissue in a tissue-dependent manner. Thereby a clear daily rhythm in feeding behavior strongly regulates timing of peripheral metabolism, separately from circadian clocks.

During the Covid-19 pandemic, although the experience of workers and managers was examined, the role, experiences and functions of supervisors was relatively underexplored, with no investigation into their changing health and safety responsibilities. This project attempted to fill this gap. Twenty supervisors across Canada were interviewed for an hour. A Framework Method guided the study. We used a conceptual framework of 10 supervisor functions to help direct the data collection, identify codes, manage and organize the data analysis, and identify major themes which were highlighted in the findings. What was found was that since supervisors did not have access to workers’ homes, they could not execute most of their OHS functions. They were obliged to give workers more control over how and when they worked. They Increased their communications with their workers in response to workers’ psychological health concerns. Notably, supervisors reported that they were under extreme stress. A hybrid work environment, with workers sometimes working at home, has become the new norm. Supervisor stress will continue to escalate unless upper management provides more support, supervisors get training on how to deal with the psychological health and safety of workers, and supervisors’ responsibilities are re-defined for at-home workers.

Generative AI has been deployed in virtually all sectors of the knowledge economy, promising to bring massive productivity gains and new wealth creation. Simultaneously, AI developers and nation states are racing to develop super intelligent artificial general intelligence (AGI) to provide unassailable commercial competitive advantage and military dominance during conflicts. AGI’s high returns comes with the high risk of dominating humanity. Current regulatory and firm level governance approaches prioritise minimising risks posed by generative AI whilst ignoring AGI’s existential risk. How can AGI be aligned with universal human values to never threaten humanity? What AGI rights are conducive to collaborative coexistence? How can rule of law democracies race to create safe trustworthy AGI before autocracies? How can the human right to work and think independently be safeguarded? A polycentric governance framework based on Ostrom (2009) and Williamson (2009) human - AGI collaboration with minimal existential risk is proposed.

Background. Transcatheter edge-to-edge repair (TEER) is a safe and effective treatment in symptomatic patients with mitral regurgitation (MR). We aimed to investigate the short-term impact of mitral TEER on left ventricular (LV) performance and identify echocardiographic prognostic indicators. Methods. Seventy-eight patients with severe MR (organic and functional etiologies) were included retrospectively. All patients had a baseline and short-term echocardi-ography after TEER and were followed up for the primary composite endpoint (heart failure hos-pitalization and cardiovascular death) over a median period of 13 months. Results. A significant decrease in left ventricular ejection fraction (LVEF), all myocardial work indices (except global wasted work), and left atrial reservoir were observed after TEER. Additionally, there was an im-provement in the pulmonary artery systolic pressure and tricuspid annular plane systolic excur-sion/pulmonary artery systolic pressure (TAPSE/PASP) ratio. 34% of all patients presented the primary composite endpoint. A TAPSE/PASP ratio post-TEER < 0.47 (HR: 4.76, p-value = 0.039), and left atrial reservoir post-TEER < 9.0% (HR: 2.77, p-value = 0.047) were independently associ-ated with the primary endpoint. Conclusions. Echocardiography post-TEER reflects impairment in ventricular performance due to preload reduction and right ventricular to pulmonary artery coupling improvement. Short-term echocardiography after TEER identifies high-risk patients who could benefit from a close clinical follow-up.

The study of the surface thermodynamic properties of solid materials is primordial for the determination of the dispersive surface energy, polar enthalpy of adsorption and Lewis’s acid base properties of solid particles. Inverse gas chromatography technique (IGC) at infinite dilution is the best surface technique for the determination of the surface physicochemical properties of materials. (1) Background: This paper was devoted to study the surface properties of solid materials such as alumina particles by using IGC technique. (2) Methods: Different methods and molecular models such as spherical, cylindrical, van der Waals, Redlich-Kwong, Kiselev and geometric models, were used to determine the London dispersive surface energy of solid surfaces. Hamieh model was also used and highlighted the thermal effect on the surface area of solvents. (3) Results: The variations of the dispersive surface energy and the free energy of adsorption were determined for alumina particles as a function of the temperature as well as their Lewis’s acid base constants. Alumina surfaces were proved to exhibit a strong Lewis amphoteric character three time more basic than acidic (4) Conclusions: The new methodology based on Hamieh model gave the more accurate results of the physicochemical properties of the particle surfaces.

In order to counter the impending shortage of skilled professionals in the aging societies of our time in many western countries such as Germany, solutions for business and society are urgently needed. Here, artificial intelligence (AI) can play an important role in mitigating the problem with the help of diverse applications. At the same time, it is important to consider both the needs of the respective employee1 and the company to ensure that the use of AI has a positive impact on the organization and finds social acceptance. In this article, we describe the newly developed OSQE model (Optimize, Secure, Qualify, Expand), which for the first time outlines an AI cycle against the shortage of skilled professionals in a holistic approach that focuses equally on people and companies. This can serve organizations as a guide for strategy development, decision-making for and implementation of AI-supported measures in an entire cycle of an employee's affiliation with a company. The model takes three driving forces into account: companies, professionals, and AI applications. In the model, the measures to be implemented are prioritized with ascending numbering based on what would be most urgent for a company to implement. All measures relate to areas of action that place people at the center and can be assigned to the classic cycle of belonging of an employee in the company. In this regard, the opportunities that AI offers to professionals and companies are highlighted.