ORF7b-2 is an accessory protein of the SARS-CoV-2 virus of only 43 amino acids. It has been implicated in various functional hypotheses, some of which predict its involvement as a trans-membrane protein. In this study, ORF7b-2 has often been compared to ORF7b-1 of the SARS virus to highlight differences and similarities with a protein that should have a similar biological role. Structural analysis of ORF7b-2 and its electrostatic characteristics show a polypeptide with both ends negatively charged and a diffuse negative charge over the entire structure. Therefore, its behavior in solution is like that of a weak negative polyelectrolyte, more precisely a polyanion with a net charge of – 4 at neutral pH. Its structure was modeled with two different modeling systems, one of which was ab initio. The two best models are similar, as confirmed by the Ramachandran plot, and show a central alpha-helical structure with two disordered and mobile ends. A normal mode analysis characterized the low-frequency dynamic aspects of the protein. The analysis of the structural shows a rigid central segment with mobile and fluctuating extremities, involved in a conformational equilibrium of the helix ↔ coil type. The calculation of the dipole moment shows its vector is not aligned with the main axis of the structure with an outward tilt of 24°. Molecular dynamics simulations were also conducted and the one in water is in good agreement with the previous results. While, the simulation performed by inserting a pre-oriented dimer (OMP) into a solvated lipid showed the low tendency of the protein to solvate in the apolar environment of the membrane. ORF7b-2 also shows a widespread distribution of negative surfaces that dynamically adjust to changes in structural organization. The BioGrid platform's [Biological General Repository for Interaction Datasets] through the BioGrid COVID-19 Coronavirus Curation Project shows a very large number of experimentally proven physical interactions unique to ORF7b-2, some of them with cytoplasmic proteins. These features of ORF7b-2, evaluated together, suggest a remarkable propensity of ORF7b-2 to interact with multiple molecular partners on both an electrostatic and hydrophobic basis. All this makes it unreasonable that the only biological function of this protein should be that exerted as an intramembrane protein.

We have shown that according to the predictions of the standard quantum theory, signaling is possible using a postponed compensation Hong-Ou-Mandel interferometer, although it violates Lorentz invariance. We argue that new physics is required to deal with such a paradox. Either quantum principles or relativity needs reassessment. We propose an experiment that can decide whether relativity rules over quantum or vice versa.

The BRFSS is an annual survey conducted by each state and designed to identify trends in a representative sample of the resident population. In its 2019 field survey, the U.S. state of Georgia tested a new 3 – item module to measure the numbers of bereaved, resident adults. Bereavement means that participants answered, ‘Yes’ to the item ‘Have you experi-enced the death of a family member or close friend in the years 2018 or 2019?’. This analysis addresses two questions. Can estimates for bereavement prevalence be derived without large sampling errors, low precision, and small subsamples? Can multiple imputation techniques be applied to overcome non-response and missing data to support multivari-ate modeling? Analyses in this study were conducted under two scenarios. Scenario 1 ap-plies the complex sample weights created by the Centers for Disease Control and imputes values for missing responses. Scenario 2 treats the data as a panel – no weighting com-bined with removal of persons with missing data. Scenario 1 reflects the use of BRFSS data for public health and policy, while Scenario 2 reflects data as it is commonly used in so-cial science research. The bereavement item has a response rate (RR) of 70.8% (5206 of 7534 persons). Subgroups have RR of 55% or more. Under Scenario 1, the prevalence of bereavement is 45.38%, meaning that 3,739,120 adults reported bereaved in 2018 or 2019. The prevalence is 46.02% with Scenario 2 which removes persons with any missing data (4,289 persons). Scenario 2 overestimates the bereavement prevalence by 1.39%. An il-lustrative logistic model is included to show the performance of exposure to bereavement under each scenario. Recent bereavement can be ascertained in a surveillance survey without biases in response. This survey is limited to one US state in a single year and ex-cludes persons aged 17 years and younger.

The most common source of transformer failure is in the insulation, and the most prevalent warning signal for insulation weakness is partial discharge (PD). Locating positons of these partial discharges would help repair the transformer to prevent failures. This work investigates algorithms that could be deployed to locate the position of a PD event using data from ultra-high frequency (UHF) sensors inside the transformer. These algorithms typically proceed in two steps: first determine the signal arrival time and then locate the position based on time differences. This paper reviews available methods for each task and then propose new algorithms: a convolutional iterative filter with thresholding (CIFT) to determine the signal arrival time and a reference table of travel times to resolve the source location. The effectiveness of these algorithms are tested with a set of laboratory-triggered PD events and two sets of simulated PD events inside transfers in production use. Tests show the new approach provides more accurate locations than the best-known data analysis algorithms, and the difference is particularly large, 3.7X, when the signal sources are far from sensors.

Herpes simplex virus type 1 (HSV-1) is among the most widely spread viruses on the planet. However, the rate of binding to the receptor is not among the greatest ones. Gibbs energy of binding, which represents the driving force for antigen-receptor binding, of HSV-1 is less negative than can be expected. Furthermore, the Gibbs energy of biosynthesis of HSV-1 is among the most negative in nature. This implies high rate of multiplication of HSV-1. Obviously, HSV-1 uses specific strategy in virus-host interaction. While most other viruses increase infectivity through a high rate of antigen-receptor binding and cell entry/ highly negative Gibbs energy of binding, HSV-1 uses another strategy. It is related to a relatively slow reaction of antigen-receptor binding, which is followed by a higher rate of multiplication, which is a consequence of a highly negative Gibbs energy of biosynthesis. We can conclude empirically that both strategies are successful.

We investigate the innovational determinants of “Patent Applications” in Europe. We use data from the European Innovation Scoreboard-EIS of the European Commission for 36 countries in the period 2010-2019. We use Panel Data with Fixed Effects, Panel Data with Random Effects, Pooled OLS, WLS and Dynamic Panel. We found that the variables that have a deeper positive association with “Patent Applications” are “Human Resources” and “Intellectual Assets”, while the variables that show a more intense negative relation with Patent Applications are “Employment Share in Manufacturing” and “Total Entrepreneurial Activity”. A cluster analysis with the k-Means algorithm optimized with the Silhouette Coefficient has been realized. The results show the presence of two clusters. A network analysis with the distance of Manhattan has been performed and we find three different complex network structures. Finally, a comparison is made among eight machine learning algorithms for the prediction of the future value of the “Patent Applications”. We found that PNN-Probabilistic Neural Network is the best performing algorithm. Using PNN the results show that the mean future value of “Patent Applications” in the estimated countries is expected to decrease of -0.1%.

Ever-increasing need for improving the livability of a city and improve outcomes for its residents, over the last decade, the adoption of technology to develop urbanised societies around the world has given rise to the need for developing smart cities. The speed at which the world population is growing, the use of Internet of Things in smart cities have really advanced the quality of life. One significant area of concern within the smart city framework is waste management. If the waste within a city is not adequately managed, then it leads to issues in the health of the citizens. Additionally, the waste management has such a high impact on the environmental footprint, hence the need to have a smart way of managing waste is of critical importance. Through our research, we analyse the challenges of waste management within a city to understand the impact of the problem on to the citizens and overall city operations. We then investigate ways in which we can solve these problems using the emerging technologies, such as the Internet of Things, to collect valuable data of large volumes arriving at an astronomical rate, then apply multi-agent deep reinforcement learning algorithms to harness the power of big data to extract meaningful information and actionable insights. We ingest data generated by our Internet of Things into our algorithm for three main purposes including providing the notifications to an external system, for example, a map navigation engine out of the scope for this project but a future extension for route optimisation and waste vehicle tracking; extracting and reporting the actionable insights from the underlying data; and consuming the extracted data for predictive forecasting to draw out the unknown patterns of waste fill levels within various geographical locations and again send out triggers and notification to external systems for example a waste collection authority who can efficiently schedule the waste collection vehicles and optimise the route. To achieve the above mentioned outcomes, we propose a framework that is agnostic of the hardware that it connects to and can effectively interface with a wide variety of hardware keeping a level of abstraction in the architecture.

Abstract: Our goal is to create point-of-care (POC) strategies that accelerate decision making, increase efficiency, improve outcomes, and enhance standards of care in island communities faced with global warming, rising oceans, population migration, and intensifying weather disasters. We assessed needs in the Bantayan Archipelago and mainland Cebu Province, Visayas Islands, Philippines, to map POC diagnostics, rescue times, and spatial care paths. Significant deficiencies were lack of cardiac troponin testing for rapid diagnosis of acute myocardial infarction, absence of blood gas and pH testing for support of critically ill patients, and geographic gaps prolonging patient transfers and delaying treatment. Strengths comprised primary care that can be facilitated by POC testing, logical inter-island transfers for which decision making and triage could be accelerated with onboard diagnostic testing, and healthcare small-world networks amenable to POC advances, such as pre-hospital testing, that avoid overloading emergency rooms. Healthcare resources must be distributed to archipelago islands, not concentrated in large metropolitan areas inaccessible for emergency interventions. We conclude that a point-of-need focus will help improve public health, decrease disparities in mortality among rural islanders versus urban dwellers, and pave the way for heightened resilience in anticipation of the adverse impact of global warming on vulnerable coastal areas.

Biological events—including outbreaks and pandemics, biological weapons use, or accidental laboratory release—have the potential to be extremely disruptive. The ability to accurately investigate, identify origins of, and attribute these events is critical for deterring deliberate events and implementing interventions to prevent future natural or accidental events. However, historical examples of biological event attribution and origins investigations illustrate significant gaps in processes, from technical capabilities to communications, and have lacked conclusive consensus among decision makers, the public, and scientists. This study aimed to assess attitudes and expectations of a broad range of stakeholders regarding investigations and evidence generated for biological attribution. We interviewed 41 experts in disciplines related to attribution and investigations and analyzed interview content using a mixed-methods approach. Interviews generated a list of factors to consider when planning or conducting investigations, presented here. Opinions concerning the conduct and reporting of biological samples analyses and perceptions of feasibility of attribution varied among interviewees representing different fields of study. Participant opinions varied less in regard to requirements, protocols, and guidelines thought to be important to maintain confidence and trust in an investigation and evidence. Findings from this study can inform planning for future events.

In this article we have estimated the value of “Opportunity Driven Entrepreneurship” in Europe. We use data from European Innovation Scoreboard-EIS of the European Commission for 36 countries in the period 2010-2019. We use Panel Data with Fixed Effects, Panel Data with Random Effects, WLS, Pooled OLS, and Dynamic Panel. Our results show that “Opportunity Driven Entrepreneurship” is positively associated, among others, to “Innovation Friendly Environment” and “Turnover Share Large Enterprises”, while it is negatively associated, among others, to “Sales Impacts” and “R&D Expenditure Business Sectors”.

In this article we estimate the value of “Non-R&D Innovation Expenditures” in Europe. We use data from the European Innovation Scoreboard-EIS of the European Commission from the period 2010-2019. We test data with the following econometric models i.e.: Pooled OLS, Dynamic Panel, Panel Data with Fixed Effects, Panel Data with Random Effects, WLS. We found that “Non-R&D Innovation Expenditures” is positively associated among others to “Innovation Index” and “Firm Investments” and negatively associated among others to “Human Resources” and “Government Procurement of Advanced Technology Products”. We use the k-Means algorithm with either the Silhouette Coefficient and the Elbow Method in a confrontation with the network analysis optimized with the Distance of Manhattan and we find that the optimal number of clusters is four. Furthermore, we propose a confrontation among eight machine learning algorithms to predict the level of “Non-R&D Innovation Expenditures” either with Original Data-OD either with Augmented Data-AD. We found that Gradient Boost Trees Regression is the best predictor for OD while Tree Ensemble Regression is the best Predictor for AD. Finally, we verify that the prediction with AD is more efficient of that with OD with a reduction in the average value of statistical errors equal to 40,50%.

In this article we investigate the determinants of “New Doctorate Graduates” in Europe. We use data from the EIS-European Innovation Scoreboard of the European Commission for 36 countries in the period 2010-2019 with Pooled OLS, Dynamic Panel, WLS, Panel Data with Fixed Effects and Panel Data with Random Effects. We found that “New Doctorate Graduates” is positively associated, among others, with “Human Resources” and “Government Procurement of Advanced Technology Products” and negatively, associated among others, with “Total Entrepreneurial Activity” and “Innovation Index”. We apply a clusterization with k-Means algorithm either with the Silhouette Coefficient either with the Elbow Method and we found that in both cases the optimal number of clusters is three. Furthermore, we use the Network Analysis with the Distance of Manhattan, and we find the presence of seven network structures. Finally, we propose a confrontation among ten machine learning algorithms to predict the value of “New Doctorate Graduates” either with Original Data-OD either with Augmented Data-AD. Results show that SGD-Stochastic Gradient Descendent is the best predictor for OD while Linear Regression performs better for AD.

Wounds represents a medical problem that contribute importantly to patient morbidity and to the healthcare costs in several pathologies. In Hidalgo, Mexico, Bacopa procumbens plant has been traditionally used for wound healing care for several generations; in vitro and in vivo experiments were design to evaluate the effects of bioactive compounds obtained from B. procumbens aquoethanolic extract and to determine the key pathways involved in wound regeneration. Bioactive compounds were characterized by HPLC- QTOF-MS and proliferation, migration, adhesion, and differentiation studies were done on NIH/3T3 fibroblasts. Polyphenolic compounds from Bacopa procumbens (PB) regulated proliferation and cell adhesion; enhanced migration reducing the artificial scratch area; and modulated cell differentiation. PB compounds were included in a hydrogel for topical administration on rat excision wound model. Histological, histochemical and mechanical analysis showed that PB treatment accelerates wound closure in at least 48 h; reduce inflammation, increasing cell proliferation and deposition and organization of collagen in earlier times. These changes resulted in the formation of a scar with better tensile properties. Immunohistochemistry and RT-PCR molecular analyses demonstrated that treatment induces: i) overexpression of transforming growth factor beta (TGF-β); and ii) the phosphorylation of Smad 2/3 and ERK1/2, suggesting the central role of some PB to enhance wound healing, modulating TGF-β activation.

Bonding agents (BA) are key compounding ingredients for the correct formulation of composite solid rocket propellants (CSRP). In particular, the addition of BA is essential to achieve suitable mechanical properties of CSRP in terms of adequate tensile strength and elongation at break. It is shown that the polarity of each conventional BA as well as new potential BA can be measured through the Reichardt’s ET(30) polarity scale. Using this criteria it was possible to find a substitute for MAPO (tris-(methylaziridinyl)-phosphine oxide), a conventional BA with the drawback of high toxicity and high reactivity, with TTPT (tris-(pyrrolidine)-phosphine oxide), a completely safe and effective BA. In this work, many other potential BA were evaluated through the Reichardt’s ET(30) polarity scale but only a selection of the potential BA were effectively tested in a standard CSRP. Particular interesting was the evaluation of TTPT vs MAPO showing the ability of the former BA to match the mechanical properties of the latter BA.

In this article we investigate the determinants of the European “Most Cited Publications”. We use data from the European Innovation Scoreboard-EIS of the European Commission for the period 2010-2019. Data are analyzed with Panel Data with Fixed Effects, Panel Data with Random Effects, WLS, and Pooled OLS. Results show that the level of “Most Cited Publications” is positively associated, among others, to “Innovation Index” and “Enterprise Birth” and negatively associated, among others, to “Government Procurement of Advanced Technology Products” and “Human Resources”. Furthermore, we perform a cluster analysis with the k-Means algorithm either with the Silhouette Coefficient and the Elbow Method. We find that the Elbow Method shows better results than the Silhouette Coefficient with a number of clusters equal to 3. In adjunct we perform a network analysis with the Manhattan distance, and we find the presence of 4 complex and 2 simplified network structures. Finally, we present a confrontation among 10 machine learning algorithms to predict the level of “Most Cited Publication” either with Original Data-OD either with Augmented Data-AD. Results show that the best machine learning algorithm to predict the level of “Most Cited Publication” with Original Data-OD is SGD, while Linear Regression is the best machine learning algorithm for the prediction of “Most Cited Publications” with Augmented Data-AD.

In this article we analyze the determinants and the export trend of European countries of medium and high technology products. The data were analyzed using various econometric models, namely WLS, Pooled OLS, Dynamic Panel, Panel Data with Fixed Effects, Panel Data with Random Effects. The results show that exports of medium and high-tech products are positively associated, among other variables, with the value of “Average Annual GDP Growth”, “Total Entrepreneurial Activity” and “Sales Impacts”, and negatively associated with, among other variables, “Human Resources”, “Government and Procurement of Advanced Technology Products” and “Buyer Sophistication”. A cluster analysis was realized with the k-Means algorithm optimized with the Silhouette coefficient. The result showed the presence of only two clusters. Since this result was considered poorly representative of the industrial complexity of the European Union countries, a further analysis was carried out with the Elbow method. The result showed the presence of 6 clusters with the dominance of Germany and the economies connected to the German economy. In addition, a network analysis was carried out using the distance to Manhattan. Four complex network structures and two simplified network structures were detected. A comparison was then made between 10 machine learning algorithms for predicting the value of exports of medium and high-tech products. The result shows that the best performing algorithm is the SGD. An analysis with Augmented Data-AD was implemented with a comparison between 10 machine learning algorithms for prediction and the result shows that the Linear Regression algorithm is the best predictor. The prediction with the Augmented Data-AD allows to reduce the MAE by about 0.0022131 compared to the prediction with the Original Data-OD.

The Internet of Things (IoT) is experiencing widespread adoption across industry sectors ranging from supply chain management to smart cities, buildings, and health monitoring. However, most software architectures for IoT deployment rely on centralized cloud computing infrastructures to provide storage and computing power, as cloud providers have high economic incentives to organize their infrastructure into clusters. Despite these incentives, there has been a recent shift from centralized to decentralized architecture that harnesses the potential of edge devices, reduces network latency, and lowers infrastructure cost to support IoT applications. This shift has resulted in new edge computing architectures, but many still rely on centralized solutions for managing applications. A truly decentralized approach would offer interesting properties required for IoT use cases. To address these concerns, we introduce a decentralized architecture tailored for large scale deployments of peer-to-peer IoT sensor networks and capable of run-time application migration. The solution combines a blockchain consensus algorithm and verifiable random functions to ensure scalability, fault tolerance, transparency, and no single point of failure. We build on our previously presented theoretical simulations with many protocol improvements and an implementation tested in a use case related to monitoring a Slovenian cultural heritage building located in Bled, Slovenia.

The article affords the question of lifelong learning in Europe using data from the European Innovation Scoreboard-EIS in the period 2010-2019 for 36 countries. The econometric analysis is realized using WLS, Dynamic Panel, Pooled OLS, Panel Data with Fixed Effects and Random Effects. The results show that lifelong learning is, among other variables, positively associated to “Human Resources” and “Government procurement of advanced technology products” and is negatively associated, among others, to “Average annual GDP growth” and “Innovation Index”. A clusterization is realized using the k-Means algorithm with a confrontation between the Elbow Method and the Silhouette Coefficient. Subsequently, a Network Analysis was applied with the distance of Manhattan. The results show the presence of 4 complex and 2 simplified network structures. Finally, a comparison was made among eight machine learning algorithms for the prediction of the value of lifelong learning. The results show that the linear regression is the best predictor algorithm and that the level of lifelong learning is expected to growth on average by 1.12%.

In this article we investigate the determinants of marketing or organizational innovators in Europe for 36 countries in the period 2010-2019. We have used data from the European Innovation Scoreboard-EIS of the European Commission. We perform different econometric models i.e. Dynamic Panel, Pooled OLS, Panel Data with Fixed Effects, Panel Data with Random Effects, WLS. Results show that the level of marketing or organizational innovators in positively associated, among others variables to “Innovation Index”, “Innovators” and “Knowledge Intensive Service Exports”, while is negatively associated with “Sales Impacts”, “Foreign Controlled Enterprises Share of Value Added” and “Government procurement of advanced technology products”.

Single-layer core corrugated sandwich panels generally consist of a corrugated core and two layers of panels, while multi-layer core corrugated sandwich panels are formed by stacking multiple layers of panels with multiple layers of core layers. In this study, integrated multilayer core corrugated sandwich panels with different shapes of corrugated cores (triangular, trapezoidal, and rectangular) and the different number of core layers were fabricated using 3D printing technology, and the mechanical behavior of such multilayer core corrugated sandwich panels under quasi-static three-point bending was investigated using experiments and numerical simulations. The effects of core shape and number of core layers on the bending deformation process, damage mode, load carrying capacity, and bending energy dissipation capacity of multilayer core sandwich panels are discussed. Parametric design of multilayer triangular core corrugated sandwich panels was also carried out by finite element software ABAQUS. It was found that a new multilayer corrugated sandwich panel with a multi-layer core is better than the single core shape multilayer corrugated sandwich panel in terms of bending load capacity, energy dissipation capacity and deformation capacity can be obtained through the combination design of different core shapes.

Six-Transmembrane Epithelial Antigen of the Prostate 1-4 (STEAP1-4) compose a family of metalloproteinases involved in iron and copper homeostasis and other cellular processes. Thus far, five homologs are known: STEAP1, STEAP1B, STEAP2, STEAP3, and STEAP4. In prostate cancer, STEAP1, STEAP2, and STEAP4 are overexpressed while STEAP3 expression is downregulated. Although the metalloreductase activities of STEAP1-4 are well-documented, their other biological functions are not. Furthermore, the properties and expression levels of STEAP heterotrimers, homotrimers, heterodimers, and homodimers are not well-understood. Nevertheless, studies over the last few decades have provided sufficient impetus to investigate STEAP1-4 as potential biomarkers and therapeutic targets for prostate cancer. In particular, STEAP1 is the target of many emerging immunotherapies. Herein, we give an overview of the structure, physiology, and pathophysiology of STEAP1-4 to provide context for past and current efforts to translate STEAP1-4 into the clinic.

Emerging RNA virus infections are a growing concern among domestic bird and poultry industries due to the severe impact it can have on the flock health and economic livelihoods. Avian paramyxoviruses (APMV) are pathogenic, negative sense RNA viruses that cause serious infections in the respiratory and central nervous system. APMV was detected in multiple avian species during the 2017 migration season in Ukraine, and studied using PCR, virus isolation, and sequencing. Of the 4090 wild bird samples, eleven swabs were isolated in chicken embryos and identified for APMV serotype by hemagglutinin inhibition test: APMV-1, APMV-4, APMV-6, APMV-7. At a variety of sites in Ukraine we characterized the virulence of the virus and further analyzed and predicted the potential risks of spillover to immunologically naïve populations. RNA was extracted and amplified using a multiplex-tiling primer approach to encompass full cDNA genomes. Full-length APMV-1 (n=5) and APMV-6 (n=2) genomes were sequenced on an Oxford Nanopore MinION device in Ukraine. All APMV-1 and APMV-6 fusion (F) proteins possessed a monobasic cleavage site, suggesting these APMV were likely low virulence, annually circulating strains. Utilization of this low-cost method will identify gaps in viral evolution and circulation in this understudied but important critical region for Eurasia.

Small cellular particles are released into the surroundings of cells and are proposed to play an important role in intercellular communication and consequently the responses of microbial com-munities to environmental stressors. We studied the connection between the small cellular parti-cles and the efficiency of three culture series of the microalge Phaeodactylum tricornutum and bac-teria (axenic microalgae, bacterial culture and co-culture of the two) in removing bisphenols from their growth medium. The microorganism growth rate was determined by flow cytometry, protein profiles were examined by protein gel electrophoresis, cultures and small cellular particle isolates were imaged by scanning electron microscopy, and bisphenols were analyzed using gas chroma-tography coupled with tandem mass spectrometry (GC-MS/MS). Higher growth rates of microal-gae were observed in the co-culture than in the axenic microalgal culture, while the presence of bisphenols neither influenced the morphology of the microalgal cells, protein profiles, nor the small cellular particle isolates. Biotic removal of bisphenols ranged from 0% to 71% and differed among the culture series in a compound-specific manner. However, it remains unclear which mechanisms influenced algal growth and bisphenol removal. Further research on the mechanisms of interspecies communication is needed to advance our understanding of microbial communities at the nano-level.

In the following article, the value of the "Knowledge Intensive Services Exports in Europe" in 36 European countries is estimated. The data were analyzed through a set of econometric models or: Poled OLS, Dynamic Panel, Panel Data with Fixed Effects, Panel Data with Random Effects, WLS. The results show that “Knowledge Intensive Services Exports” is negatively associated, among others, with "Buyer Sophistication", "Government Procurement of Advanced Technology Products", and positively associated with the following variables i.e. "Innovation Index", "Sales Impacts" and "Total Entrepreneurial Activity". Then a clusterization with k-Means algorithm was made with the Elbow method. The results show the presence of 3 clusters. A network analysis was later built and 4 complex network structures and three structures with simplified networks were detected. To predict the future trend of the variable, a comparison was made with eight different machine learning algorithms. The results show that prediction with Augmented Data-AD is more efficient than prediction with Original Data-AD with a reduction of the mean of statistical errors equal to 55,94%.

Objective: Radiomics and deep transfer learning are two popular technologies used to develop computer-aided detection and diadnosis (CAD) schemes of medical images. This study aims to investigate and compare advantages and potential limitations of applying these two technologies in developing CAD schemes. Methods: A relatively large and diverse retrospective dataset including 3,000 digital mammograms is assembled in which 1,496 images depict malignant lesions and 1,054 images depict benign lesions. Two CAD schemes are developed to classify breast lesions. The first scheme is developed using four steps namely, applying an adaptive multi-layer topographic region growing algorithm to segment lesions, computing initial radiomics features, applying a principal component algorithm to generate an optimal feature vector, and building a support vector machine classifier. The second CAD scheme is built based a pre-trained residual net architecture (ResNet50) as a transfer learning model to classify breast lesions. Both CAD schemes are trained and tested using a 10-fold cross-validation method. Several score fusion methods are also investigated to classify breast lesions. CAD classification performance is evaluated by the area under ROC curve (AUC). Results: ResNet50 model-based CAD scheme yields AUC = 0.85±0.02, which is significantly higher than radiomics feature-based CAD scheme with AUC = 0.77±0.02 (p < 0.01). Additionally, fusion of classification scores generated by two CAD schemes does not further improve classification performance. Conclusion: This study indicates that using deep transfer learning is more efficient to develop CAD schemes and enables to yield higher lesion classification performance than CAD schemes developed using radiomics-based technology.

The following article indicates the determinants of “Internet User Skills” among European countries based on the application of the database deriving from the DESI-Index. The data were analyzed using the following econometric models, namely: Panel Data with Fixed Effects, Panel Data with Random Effects, Pooled OLS, WLS, WLS corrected for heteroskedasticity. The Elbow method and the Silouette coefficient method were compared for the optimization of the number of clusters obtained by the k-Means algorithm. The result shows the presence of 5 clusters. A network analysis was carried out using the Euclidean distance with the result of identifying two network structures between some analyzed countries. subsequently a comparison was made between six different machine learning algorithms for the prediction of the future value of the variable of interest. The result shows that the best predictor algorithm is Gradient Boosted Tree Regression with an expected value of the predicted variable increasing by a value of 1.75%. Later a further comparison was made by comparing 6 algorithms with the increased data. The result shows that the best predictor is Simple Regression Tree. The interest variable is predicted to decrease by an amount equal to -6.099%. Statistical errors improve on average by 32.43% in the transition between the original data and the increased data.

The following article analyzes the determinants of the innovation index in Europe. The data refer to the European Innovation Scoreboard-EIS of the European Commission for the period between 2010 and 2019 for 36 countries. The data are analyzed using the following econometric techniques: Panel Data with Random Effects, Panel Data with Fixed Effects, Dynamic Panel Data, Pooled OLS, WLS. The results show that the Innovation Index is negatively connected to some variables, among which the most significant are "GDP per capita", "R&D expenditure public sector", "Venture capital", "Tertiary education", and positively connected to some variables among which the most relevant are: "Government procurement of advanced technology products", "Average annual population growth", "Finance and support", "Human resources", "Marketing or organisational innovators", "Linkages". A clustering was then carried out using the unsupervised k-Means algorithm optimized with the Silhouette coefficient which shows the presence of 2 clusters per value of the Innovation Index. Eight machine learning algorithms has been used for prediction with real data. The Tree Ensemble Regression algorithm has been chosen as best performer. A further prediction has been made with the augmented data. The result shows that the best performing algorithm is Linear Regression with an innovation index value predicted to grow by approximately 3.38%.

The one-to-one structural correspondence between any conjugated hydrocarbon CnHm and the borane BnHm+n is extended here, with the B3LYP/cc-pVDZ model, to pure conjugated carbon systems with the example of buckminsterfullerene C60 with the corresponding icosahedral isoelectronic system closo-borane B60H60, and the fluorine substituted systems B60F30H30 and B60F60 , all with icosahedral Ih symmetry. All systems correspond to energy minima in the potential energy hypersurface, except for B60(F30)in(H30)out . Selected electronic structure methods are used to characterize all systems: molecular electrostatic potentials (MEP), atomic charges, bond orders, and topological properties of the electron density within quantum theory of atoms-in-molecules (QTAIM) and electron-localization function (ELF) theory. In the particular case of B60H60 we use the recently developed Hückeloid model to characterize this system. The stability of the energy minimum icosahedral structure B60F60 could have an origin in F···F attractive interactions of the inner fluorine atoms of the cage.

Integrating large-scale wind energy in modern power systems is demanding more efficient mathematical models to properly address classical assumptions in power system problems. In particular, there are two main assumptions in power system problems with wind integration that have not been adequately studied yet; First, non-linear AC power flow equations have been linearized in most of the literature. Such simplifications can lead to inaccurate power flow calculations that may result in other technical issues. Second, wind power uncertainties are inevitable and have been mostly modelled using the traditional uncertainty modelling approaches, that may not be suitable for large-scale wind power integration. In this paper, we address both challenges: we present a tight second-order conic relaxation (SOCR) for optimal power flow (OPF) problem, and simultaneously, implement the new effective budget of uncertainty approach for uncertainty modelling that determines the maximum wind power admissibility first and then addresses the uncertainty in the model. To the best of our knowledge, this is the first study that proposes an effective robust second-order conic programming (ERSOCP) model that simultaneously addresses the issues of power flow linearization and wind power uncertainty with the new paradigm on the budget of uncertainty approach. Our numerical results show the merit of the proposed model against traditional linearized power flow equations as well as traditional uncertainty modelling approaches.

Patients with COVID-19 may develop pneumonia, severe symptoms of acute respiratory distress syndrome, and multiple organ failure. Nevertheless, the variety of forms of this disease, requires further research on the pathogenesis of this disease. Based on the analysis of published data on the concentrations of SARS-CoV-2 in biological fluids of the nasopharynx, lungs and intestines and using a developed modular model of the virus distribution in human tissue and organs, an assessment of the SARS-CoV-2 reproduction in various compartments of the body is presented. Most of viral particles can enter into the esophagus from nasopharynx. Entering viral particles into the gastrointestinal tract will obviously be accompanied by infection of the intestinal epithelium and accumulation of the virus in the intestinal lumen in an amount proportional their secretory and protein-synthetic activities. The relatively low concentration of SARS-CoV-2 in tissues implies an essential role of transport processes and redistribution of the virus from nasopharynx and intestines to lungs. The model simulations also supposes that sanitation of the nasopharynx mucosa at the initial stage of the infectious process considering inhibition of the virus accumulation by means of cellular and humoral responses has prospects for the use in medicine practice.

The following article estimates the value of ICT Specialists in Europe between 2016 and 2021 for 28 European countries. The data were analyzed using the following econometric techniques, namely: Panel Data with Fixed Effects, Panel Data with Random Effects, WLS and Pooled OLS. The results show that the value of ICT Specialists in Europe is positively associated with the following variables: "Desi Index", "SMEs with at least a basic level of digital intensity", "At least 100 Mbps fixed BB take-up" and negatively associated with the following variables: "4G Coverage","5G Coverage", "5G Readiness", "Fixed broadband coverage", "e-Government", "At least Basic Digital Skills", "Fixed broadband take-up", "Broadband price index", "Integration of Digital Technology". Subsequently, two European clusters were found by value of "ICTG Specialists" using the k-Means clustering algorithm optimized by using the Silhouette coefficient. Finally, eight different machine learning algorithms were compared to predict the value of "ICT Specialists" in Europe. The results show that the best prediction algorithm is ANN-Artificial Neural Network with an estimated growth value of 12.53%. Finally, "augmented data" were obtained through the use of the ANN-Artificial Neural Network, through which a new prediction was made which estimated a growing value of the estimated variable equal to 3.18%.

The following article analyzes the determinants of e-government in 28 European countries between 2016 and 2021. The DESI-Digital Economy and Society Index database was used. The econometric analysis involved the use of the Panel Data with Fixed Effects and Panel Data with Variable Effects methods. The results show that the value of “e-Government” is negatively associated with “Fast BB (NGA) coverage”, “Female ICT specialists”, “e-Invoices”, “Big data” and positively associated with “Open Data”, “e-Government Users”, “ICT for environmental sustainability”, “Artificial intelligence”, “Cloud”, “SMEs with at least a basic level of digital intensity”, “ICT Specialists”, “At least 1 Gbps take-up”, “At least 100 Mbps fixed BB take-up”, “Fixed Very High Capacity Network (VHCN) coverage”. A cluster analysis was carried out below using the unsupervised k-Means algorithm optimized with the Silhouette coefficient with the identification of 4 clusters. Finally, a comparison was made between eight different machine learning algorithms using "augmented data". The most efficient algorithm in predicting the value of e-government both in the historical series and with augmented data is the ANN-Artificial Neural Network.

The transmission and analysis of data is one of the challenges of the 21st century. In the field of environmental measurement technology, existing broadband and wireless technologies have not been able to transmit data reliably and cost-effectively over long distances and in hard-to-reach places. LoRaWAN, an IoT technology, could be an energy-efficient, cost-effective and secure alternative as a narrowband technology in combination with battery-powered sensors and thus make an important contribution to the intelligent, largely wireless networking of objects, plants and machines (IoT), for example in the municipal sector. In addition to ecological and economic benefits, the quality of life in modern, intelligently networked cities can be enhanced by real time data acquisition. However, the prerequisite is that the quality of the data acquired via this method is sufficiently good. This paper therefore addresses the question of the quality of particulate matter data collected by low-cost sensors. To determine this, an SDS011 particulate matter sensor from Nova Fitness was ported to LoRaWAN. The sensor was installed next to a governmental measurement station. In a test that lasted five weeks, data from the SDS011 sensor were compared with those from the governmental station. Differences were identified and a correction approach was developed and applied. The efficiency of the approach was verified. Based on the results, it can be seen that the use of the low cost sensors has weaknesses. Problems can only be partially reduced. Nevertheless, the use of the low-cost sensors can be helpful for a flexible and cost effective collection of environmental data.

This article analyzes the determinants of the "Broadband Price Index" in Europe. The data used refer to 28 European countries between 2016 and 2021. The database used is the Digital, Economy and Society Index-DESI of the European Commission. The data were analyzed using the following econometric techniques, namely Panel Data with Random Effects, Panel Data with Fixed Effects, Pooled OLS, WLS and Dynamic Panel. The value of the "Broadband Price Index" is positively associated with the DESI Index, and "Connectivity" while it is negatively associated with "Fixed Broadband Take Up", "Fixed Broadband Coverage", "Mobile Broadband", "e-Government", "Advanced Skills and Development", "Integration of Digital Technology", "At Least Basic Digital Skills ", "Above Basic Digital Skills "," At Least Basic Software Skills ". A cluster analysis was carried out below using the k-Means algorithm optimized with the Silhouette coefficient. The analysis revealed the existence of three clusters. Finally, an analysis of the machine learning algorithms was carried out to predict the future value of the "Broadband Price Index". The result shows that the most useful algorithm for prediction is the Artificial Neural Network-ANN with an estimated value equal to an amount of 9.21%.

The determinants of the presence of “Foreign Doctorate Students” among 36 European Countries for the period 2010-2019 are analyzed in this article. Panel Data with Fixed Effects, Random Effects, WLS, Pooled OLS, and Dynamic Panel are used to investigate the data. We found that the presence of Foreign Doctorate Students is positively associated to “Attractive Research Systems”, “Finance and Support”, “Rule of Law”, “Sales Impacts”, “New Doctorate Graduates”, “Basic School Entrepreneurial Education and Training”, “Tertiary Education” and negatively associated to “Innovative Sales Share”, “Innovation Friendly Environment”, “Linkages”, “Trademark Applications”, “Government Procurement of Advanced Technology Products”, “R&D Expenditure Public Sectors”. A cluster analysis was then carried out through the application of the unsupervised k-Means algorithm optimized using the Silhouette coefficient with the identification of 5 clusters. Finally, eight different machine learning algorithms were used to predict the value of the "Foreign Doctorate Students" variable. The results show that the best predictor algorithm is the "Tree Ensemble Regression" with a predicted value growing at a rate of 114.03%.

The present era of the Internet of Things (IoT) having intelligent functionalities in solving problems pertaining to realtime mission-critical systems has brought an immense revolution in diverse fields including healthcare and navigation systems. However, to the best of our knowledge, the potential of IoT has not been fully exploited yet in the field of the energy sector. We argue that there is an immense need to shift the traditional mission-critical electric power system architecture to IoT-based fully orchestrated architecture in order to increase efficiency, as billions of investment is reserved for the energy sector globally. Since network orchestration deals with auomating the interaction between multiple components involved to execute a particular service, therefore, scheduling the relevant processes within strict deadlines becomes the core pillar of the architecture. The mission-critical systems with urgent task execution often suffer from issues of missing task deadlines. In this study, we present a novel IoT task orchestration architecture for efficient energy management of a nanogrid system that focuses on minimizing the use of nonrenewable energy resources and maximizing the use of renewable energy resources. Moreover, major components of IoT task orchestration such as task mapping and task scheduling are also enhanced using NLP and PSO optimization modules. The proposed task scheduling algorithm incorporates the optimized surplus time, and efficiently executes the energy management-related tasks contemplating to their types. The study utilizes sensors to obtain data from physical IoT devices, including photovoltaic (PV), Energy Storage System (ESS), and diesel generator (DG). The performance of the proposed model is evaluated using data set of nanogrid houses. The outcomes revealed that IoT-task orchestration has played a pivotal role in efficient energy management for nanogrid mission-critical system. Furthermore, the comparison with state-of-the-art scheduling algorithms showed that the task starvation rate is reduced to 16% and 12% when compared with RR and FEF algorithms, respectively.

Burrs form due to plastic deformation of materials during machining processes, such as milling and drilling. Deburring can be very difficult when the burrs are not easily accessible for removal. In this study, abrasive flow machining (AFM) was adopted for deburring the edges of milling specimens. Based on the experimental observations on AL6061 specimens, the deburring performance was characterized in terms of flow speed, the local curvature of the streamline near the burr edge, and shear stress. A new objective function that can predict the extent of deburring is proposed based on these characteristics and validated through experiments. Based on this new objective function, a prediction of deburring performance on the burr edge of the intersecting holes with offset was performed. The results between the predicted and experimental observation results were in reasonable agreement.

Combining Matrix-Assisted Laser Desorption/Ionization Time-of-Flight (MALDI-TOF) spectra data and artificial intelligence (AI) has been introduced for rapid prediction on antibiotic susceptibility test (AST) of S. aureus. Based on the AI predictive probability, the cases with probabilities between low and high cut-offs are defined as “grey zone”. We aimed to investigate the underlying reasons of unconfident (grey zone) or wrong predictive AST. A total 479 S. aureus isolates were collected, analyzed by MALDI-TOF, and AST prediction, standard AST were obtained in a tertiary medical center. The predictions were categorized into the correct prediction group, wrong prediction group, and grey zone group. We analyzed the association between the predictive results and the demographic data, spectral data, and strain types. For MRSA, larger cefoxitin zone size was found in the wrong prediction group. MLST of the MRSA isolates in the grey zone group revealed that uncommon strain types composed 80%. Amid MSSA isolates in the grey zone group, the majority (60%) was composed of over 10 different strain types. In predicting AST based on MALDI-TOF AI, uncommon strains and high diversity would contribute to suboptimal predictive performance.

Globally, groundwater is the largest distributed storage of freshwater and plays an important role in an ecosystem’s sustainability in addition to aiding human adaptation to both climatic change and variability. However, groundwater resources are dynamic and often change as a result of land usage, abstraction, as well as variation in climate. To solve these challenges, many conventional solutions, such as certain numerical techniques, have been proffered for groundwater modelling. The global evolution of the Internet of Things (IoT) has enhanced the culture of data gathering for the management of groundwater resources. In addition, efficient data-driven groundwater resource management relies hugely on information relating to changes in groundwater resources as well as their availability. At the moment, some studies in the literature reveal that groundwater managers lack an efficient and real-time groundwater management system that is needed to gather the required data. Additionally, the literature reveals that the existing methods of collecting data lack the required efficiency to meet computational model requirements and meet management objectives. Unlike previous surveys, which solely focussed on particular groundwater issues related to simulation and optimisation management methods, this paper seeks to highlight the current groundwater management models as well as the IoT contributions.

Through a modern derivation of Planck's formula for the entropy of an arbitrary beam of photons we derive a general expression for the entropy production due to the irreversible process of the absorption of an arbitrary incident photon spectrum in material and its dissipation into an infrared-shifted grey-body emitted spectrum, the rest being reflected or transmitted. Employing the framework of Classical Irreversible Thermodynamic theory, we define the generalized thermodynamic flow as the flow of photons from the incident beam into the material and the generalized thermodynamic force is then just the entropy production divided by the photon flow which is the entropy production per unit photon at a given wavelength. We compare the entropy production under sunlight of different inorganic and organic materials (water, desert, leaves and forests) and show that organic materials are the greater entropy producing materials. Intriguingly, plant and phytoplankton pigments (including chlorophyll) have peak absorption exactly where entropy production through photon dissipation is maximal for our solar spectrum $430<\lambda<550$ nm, while photosynthetic efficiency is maximal between 600 and 700 nm. These results suggest that the evolution of pigments, plants and ecosystems has been towards optimizing entropy production rather than photosynthesis. We propose using the wavelength dependence of global entropy production as a biosignature for discovering life on planets of other stars.

We continue in this paper to illustrate the implications of the Dual Model of Liquids (DML) by deriving the expression for the isochoric specific heat as function of the collective degrees of freedom available at a given temperature and analyzing its dependence on temperature. Two main tasks will be accomplished. First, we show that the expression obtained for the isochoric specific heat in the DML is in line with the experimental results. Second, the expression will be compared with the analogous one obtained in another theoretical dual model of the liquid state, the Phonon Theory of Liquid Thermodynamics. This comparison will allow to get interesting insights about the number of collective degrees of freedom available in a liquid and on the value of the isobaric thermal expansion coefficient, two quantities that are related to each other in this framework.

A total of 281 guano samples were collected from caves (N = 181) in 8 European countries (Bulgaria, Czech Republic, France, Hungary, Italy, Romania, Slovakia and Slovenia) and attics in the Czech R. (N = 100). The correlation of detection of mycobacteria between Ziehl-Neelsen (ZN) microscopy and culture examination and qPCR was strong. ZN microscopy was positive in guano from caves (58.6%) more than double than positivity in guano from attics (21.0%; P &lt;0.01). From 89 mycobacterial isolates (73 isolates from cave guano and 16 isolates from attics’ guano) 68 (76.4%) isolates of 19 sp., ssp. and complex were identified as members of 3 Groups (M. fortuitum, M. chelonae, and M. mucogenicum), and 4 Complexes (M. avium, M. terrae, M. vaccae, and M. smegmatis). A total of 20 isolates (22,5%) belonged to risk group 1 (environmental saprophytes), 48 isolates (53.9%) belonged to risk group 2 (potential pathogens), and none of isolates belonged to risk group 3 (obligatory pathogens). When comparing bat guano collected from caves and attics, differences (P&lt;0.01; Mann-Whitney test) were observed for the electrical conductivity, total carbon, total organic and total inorganic carbon. None difference (P&gt; 0.05; Mann-Whitney test) was found for pH and oxidation-reduction potential parameters.

: Chemical accidents can occur anywhere. The need for chemical management in Korea was realized following the 2012 Gumi hydrofluoric acid accident in 2012. The Chemicals Control Act was enacted in 2015. This system evaluates the risks (high, medium, low) and consequent safety management at all plants that handle hazardous chemical substances. However, the system was criticized as excessive when most plants were designated high-risk without considering their size. Thus, laboratories and hospitals handling very small quantities were subject to regulation. Accordingly, in 2021 Korea revised the system to include off-site consequence analyses and a Korean-style risk analysis. Plants handling very small quantities, such as laboratories and hospitals, were exempt from regulation. In this study, plating and paint manufacturing companies, which were classified as high-risk in the previous system, even though they were medium-size business plants, were re-evaluated as low-risk plants. In the Korean-style risk analysis, it is possible to see at a glance what is lacking in the plants, such as cooperation between local residents and local governments and the construction of safety facilities according to the type of accident scenario. The revised system is a reasonable regulation for medium business plants.

(1) Background: In patients suffering from heart failure, the main causes of death are either he-modynamic failure, or ventricular arrhythmias. The only tool to significantly reduce arrhythmic sudden death is the implantable cardioverter defibrillator (ICD), but not all patients benefit to the same extend of these devices. (2) Methods: The primary outcome of this single center study was defined as cardiovascular death in patients with ischemic and non-ischemic heart failure who have benefited from ICD therapy. The secondary outcomes were death from any cause, sudden cardiac death, ICD-related therapies (appropriate antitachycardia pacing or shock therapy for ventricular tachycardia or fi-brillation) and recurrences of ventricular tachyarrhythmias. (3) Results: A total of 403 consecutive ICD recipients – symptomatic heart failure patients with ICD for the primary prevention of sudden cardiac death – were included retrospectively: 59% is-chemic cardiomyopathy (ICMP) and 41% non-ischemic cardiomyopathy (NICMP). Within a median follow-up period of 36 months, the incidence of cardiovascular mortality was not signif-icantly different in patients with NICMP and ICMP: the primary outcome had occurred in 9 pa-tients (5.4%) in the NICMP group and in 14 patients (5.9%) in the ICMP group (hazard ratio 1; 95%confidence interval [CI] 0.45 to 2.28; p =0.97). All-cause mortality occurred in 14 of 166 pa-tients (8.4%) in NICMP group and 18 of 237 patients (7.6%) in ICMP group. Sudden cardiac death occurred in 2 patients (1.2%) in the NICMP group and in 4 patients (1.7%) in the ICMP group (hazard ratio 0.71; 95% CI, 0.13 to 3.88; P=0.69). The rate of appropriate device therapies was comparable in both groups. (4) Conclusion: In this study, ICD implantation for primary prevention of sudden cardiac death in patients with symptomatic systolic heart failure was associated with similar rates of cardiovas-cular and all-cause mortality in patients with ischemic heart disease, and in patients with heart failure from other causes. NICMP and ICMP showed comparable rates of recurrent ventricular tachyarrhythmias and appropriate ICD therapies.

This article challenges the assumption that journals and peer review are essential for developing, evaluating and disseminating scientific and other academic knowledge. It suggests a more flexible ecosystem, and examines some of the possibilities this might facilitate. The market for academic outputs should be opened up by encouraging the separation of the dissemination service from the evaluation service. Publishing research in subject-specific journals encourages compartmentalising research into rigid categories. The dissemination of knowledge would be better served by an open access, web-based repository system encompassing all disciplines. There would then be a role for organisations to assess the items in this repository to help users find relevant, high-quality work. There could be a variety of such organisations which could enable reviews from peers to be supplemented with evaluation by non-peers from a variety of different perspectives: user reviews, statistical reviews, reviews from the perspective of different disciplines, and so on. This should reduce the inevitably conservative influence of relying on two or three peers, and make the evaluation system more critical, multi-dimensional and responsive to the requirements of different audience groups, changing circumstances, and new ideas. Non-peer review might make it easier to challenge dominant paradigms, and expanding the potential audience beyond a narrow group of peers might encourage the criterion of simplicity to be taken more seriously - which is essential if human knowledge is to continue to progress.

Child and adolescent sexual abuse (CSA) is an international public health problem. Despite the importance of the CSA, there is no consensus definition, and the lack of consensus is related to difficulties in conducting prevalence studies, as well as research in other areas. To establish a consensual definition, legal aspects such as the age of sexual consent and the difference in age or power between victim and aggressor, aspects related to sexual freedom and sexual indemnity must be considered. Therefore, the main goal of this research was to analyze the age of sexual consent in the legal systems of Spanish-speaking countries and to examine whether the Romeo and Juliet clause is established. To achieve the proposed aims, we employed the legal interpretation method, and we analyzed the current Criminal Codes of the 21 Spanish-speaking countries. From the results, it is found that the age of sexual consent varies between countries, establishing valid sexual consent between 13 and 18 years. In addition, only six countries have the Romeo and Juliet clause that protects sexual freedom in adolescents. Finally, we discussed the lack of consensus on the age of sexual consent and the limitations presented by the Romeo and Juliet clause.

Keywords: Chemical Intolerance, Drug Intolerance, Food Intolerance, QEESI, BREESI, Multiple Chemical Sensitivity, Toxicant-induced Loss of Tolerance, Prevalence

The present investigation is focused on the forecasting visual observation of the impact of anthropogenic activity on the pilgrimage places located along the coastal environments in Tamil Nadu, India. Devotees performing the unregulated ritual ceremonies, open defecation, waste materials dumping and local municipality discharging wastewater contamination levels were assessed from direct visual surveillance, and by taking photographs and baseline information collected from five different pilgrimage sites. Results showed that ritual ceremonies, wastewater discharges and debris highly contaminated site-III, and found open defecation at site-I. The lack of coastal regulation, pollution awareness, insufficient sanitation facilities and failure to control the commercial and recreational activities have major deleterious effects on the present and future environments of the coastal areas. This is the first attempt conducted by visual assessment of the coastal pollution in pilgrimage places. The results immensely support the recommendation for proper regulation of ritual activities, arrangement of basic sanitation facilities and prohibition of wastewater discharges to prevent waterborne diseases as well as to strictly follow the regional and national level of coastal regulation policy to protect the biological resources of the Gulf of Mannar marine ecosystems.

Triple negative breast cancer (TNBC) has a higher mRNA expression of programmed cell death ligand 1 (PD-L1) which is a ligand to programmed cell death protein 1 (PD-1). The binding of the ligand leads to suppressed activity of T-cell-mediated immune response against cancer cells. The approval of anti-PD-L1 drugs including pembrolizumab and atezolizumab in subgroups of TNBC offer potential improvement to the current treatment regimens available for TNBC. We conducted a meta-analysis to review the efficacy of pembrolizumab and atezolizumab for the treatment of TNBC in both adjuvant and neo-adjuvant settings. A systematic strategy was used as per the PRISMA 2020 statement. All statistical analyses were conducted using Review Manager 5.4. Outcome measures included objective response rate, progression free survival, overall survival in adjuvant therapy groups, and pathological complete response rates in neoadjuvant groups. Six clinical trials were included. For adjuvant therapies, the ORR (OR=1.26, P = 0.04) of Atezolizumab/Pembrolizumab plus chemotherapy was higher in intention to treat (ITT) arms than the placebo groups in TNBC. A positive effect size was found for PFS in the ITT arms (Cohen’s d = 1.55, P<0.001). The Atezolizumab plus chemotherapy group had a positive effect size for OS compared to the control groups (Cohen’s d = 0.52, P<0.001). In the neo-adjuvant setting, patients in ITT arms had higher pCR rates as compared to the control groups (OR= 1.61, P = 0.001). Our findings collate evidence of pembrolizumab and atezolizumab as a viable treatment option among patients with TNBC with PDL1+ subgroups deriving benefits.

There is a need to search for new antifungals, especially for the treatment of the invasive Candida infections, caused mainly by C. albicans. These infections are steadily increasing at an alarming rate, mostly among immunocompromised patients. The newly synthesized compounds (3a-3k) were characterized by physico-chemical parameters and investigated for antimicrobial activity using the microdilution broth method to estimate minimal inhibitory concentration (MIC). Additionally, their antibiofilm activity and mode of action together with the effect on the membrane permeability in C. albicans were investigated. Biofilm biomass and its metabolic activity were quantitatively measured using crystal violet (CV) staining and tetrazolium salt (XTT) reduction assay. The cytotoxic effect on normal human lung fibroblasts and hemolytic effect were also evaluated. The results showed differential activity of the compounds against yeasts (MIC = 0.24-500 µg/mL) and bacteria (MIC = 125-1000 µg/mL). Most compounds possessed strong antifungal activity (MIC = 0.24-7.81 µg/mL). The compounds 3b, 3c, and 3e, showed no inhibitory (at 1/2 MIC) and eradication (at 8 x MIC) effect on C. albicans biofilm. Only slight decrease in the biofilm metabolic activity was observed for compound 3b. Moreover, the studied compounds increased the permeability of the membrane/cell wall of C. albicans and their mode of action may be related to action within the fungal cell wall structure and/or within the cell membrane. It is worth noting that the compounds had no cytotoxicity effect on pulmonary fibroblasts and erythrocytes at concentrations showing anticandidal activity. The present studies in vitro confirm that these derivatives appear to be a very promising group of antifungals for further preclinical studies.

Climate change is expected to influence cooling and heating energy demand of residential buildings and affect overall thermal comfort. Towards this end, the heating degree-day (HDD), the cooling degree-day (CDD) and the HDD+CDD were computed from an ensemble of 7 high-resolution bias-corrected simulations attained from EURO-CORDEX under RCP4.5 and RCP8.5. These three indicators were analyzed for 1971-2000 (from E-OBS) and 2011-2040 and 2041-2070, under both RCPs. Results show that the overall spatial distribution of HDD trends for the 3 time-periods points out an increase of energy demand to heat internal environments in Portugal's northern-eastern regions, most significant under RCP8.5. It is projected an increase of CDD values for both scenarios; however, statistically significant linear trends were only found for 2041-2070 under RCP4.5. The need for cooling is almost negligible for the remaining periods, though linear trend values are still considerably higher for 2041-2070 under RCP8.5. By the end of 2070, higher amplitudes for all indicators are depicted for southern Algarve and Alentejo regions, mainly under RCP8.5. For 2041-2070 the Centre and Alentejo (North and Centre) regions present major positive differences for HDD(CDD) under RCP4.5(RCP8.5), within the 5 NUTS II regions predicting higher heating(cooling) requirements for some locations.

A multiscale mathematical model is proposed seeking to study the propagation dynamics of the Human Immunodeficiency Virus (HIV) in a group of young people between 15 and 24 years of age, through sexual contact without protection, considering the use of antiretroviral therapy (ART) and therapeutic failure. The model consists in a scale-free complex network that follows a power law, coupled with the immunological dynamics of each individual, that is, it considers the infection by the virus in the immune system of each HIV carrier, through a system of non-linear differential equations that govern the infection’s behavior in the immune system. Propagation of the virus in the network is modelled by taking into account information from the immunological status of each person. The study found that for a population to have high HIV prevalence, it is not necessary at the beginning of the simulation time for the virus to propagate rapidly. In addition, the study proves that with a higher number of sexual partners, there will be greater prevalence of HIV in the population and that the use of ART helps to control the propagation of the infection in the population. As an interesting result, it was also found that there is a higher number of HIV carriers who abandon ART than those who have access to it.

This work is divided into two parts. In the first one the combinatorics of a new class of randomly generated objects, exhibiting the same properties as the distribution of prime numbers, is solved and the probability distribution of the combinatorial counterpart of the n-th prime number is derived, together with an estimate of the prime-counting function π(x). A proposition equivalent to the Prime Number Theorem (PNT) is proved to hold, while the equivalent of the Riemann Hypothesis (RH) is proved to be false with probability 1 (w.p. 1) for this model. Many identities involving Stirling numbers of the second kind and harmonic numbers are found, some of which appear to be new. The second part is dedicated to generalizing the model to investigate the conditions enabling both PNT and RH. A model representing a general class of random integer sequences is found, for which RH holds w.p. 1. The prediction of the number of consecutive prime pairs, as a function of the gap d, is derived from this class of models and the results are in agreement with empirical data for large gaps. A heuristic version of the model, directly related to the sequence of primes, is discussed and new integral lower and upper bounds of π(x) are found.

Aim. The purpose of the work was the development of a machine learning model for diagnosing the stage of liver fibrosis in patients with chronic viral hepatitis C according to the data of routine clinical examination. Materials and methods. A total of 1240 patients with chronic viral hepatitis C was examined. A set of data obtained from 689 patients balancing by the stage of liver fibrosis was used for developing and testing machine learning models. 9 routine clinical parameters were selected as the most important predictors for determining the likelihood of liver fibrosis the 3–4 stages presence: age, height, weight and body mass index of the patient, the number of platelets in the clinical blood test, levels of alanine transaminase, aspartate transaminase, gamma-glutamyltransferase, and total bilirubin in a biochemical blood test. Results. The accuracy of the developed method for determining the 3–4 stages of liver fibrosis in patients with chronic viral hepatitis C in comparison with the «gold standard» of diagnosis (liver biopsy) was 80.56% (95% CI: 69.53–88.94%), sensitivity — 66.67%, specificity — 94.44%. Conclusion. The developed method is an alternative to more expensive and geographically inaccessible studies. The method does not require the purchase of additional equipment or software, as well as additional laboratory tests, when used in real clinical practice. The introduction of the method into clinical practice can help to solve the problem of low material and territorial availability of diagnostic tests and allow determining the stage of liver fibrosis in patients with chronic viral hepatitis C.

Background: A malfunction of the innate immune response in COVID-19 is associated with eosinopenia particularly in more severe cases. This study tested the hypothesis that this eosinopenia is COVID-19 specific and is associated with systemic activation of eosinophils.. Methods: Blood of 15 healthy controls and 75 adult patients with suspected COVID-19 at the ER were included before PCR testing and analyzed by point-of-care automated flow cytometry (CD10, CD11b, CD16 and CD62L) in the absence or presence of a formyl peptide (fNLF). 45 SARS-CoV-2 PCR positive patients were grouped based on disease severity. PCR negative patients with proven bacterial (n=20) or other viral (n=10) infections were used as disease controls. Eosinophils were identified with the use of the FlowSom algorithm. Results: Low blood eosinophil numbers (<100 cells/microL; p<0.005) were found both in patients with COVID-19 and with other infectious diseases albeit less pronounced. Two discrete eosinophil populations were identified in healthy controls both before and after activation with fNLF based on the expression of CD11b. Before activation, the CD11bbright population consisted of 5.4% (CI95% = 3.8, 13.4) of total eosinophils. After activation, this population of CD11bbright cells comprised nearly half the population (42.21%, CI95% = 35.9, 54.1). Eosinophils in COVID-19 had a similar percentage of CD11bbright cells before activation (7.6%, CI95% = 4.5, 13.6), but were clearly refractory to activation with fNLF as a much lower percentage of cells end up in the CD11bbright fraction after activation (23.7%, CI95% = 18.5, 27.6; p<0.001). Conclusion: Low eosinophil numbers in COVID-19 are associated with refractoriness in responsiveness to fNLF, which is likely caused by migration of fully functional cells to the tissue. Such homing might be beneficial as eosinophils have been implicated in viral killing.

Whether the universe is a computer simulation, or whether we wish to efficiently model our universe in a computer simulation, there would be benefits to modeling it in a fashion analogous to computer spreadsheet, each lattice cell can be conceived as containing all the mathematical formula necessary to continuously compute its state relative to changes in all its neighboring cells, and by progression, in relation to all the cells of entire space-time lattice. Alternatively, the “real” universe may itself be built on a space cell lattice, an irregular foam of space cells, in which each cell may be conceived as a multidimensional cell of distortable space, the shape of which fully describes (a) the four basic forces (gravity, electromagnetic, strong, weak) observed at that cell of space, and (b) the probability (or weight distribution) of any quantum states overlapping the cell and its neighbors. At an appropriate scale, it would appear that this conceptual model would resolve apparent conflicts between general relativity and quantum physics. It would also provide a new interpretation of Planck’s constant as description of the number of space cell events associated with any set of observable events. If formulae operating at a lattice cell level can be improve our ability to understand and model larger scale phenomena, this would be strong evidence in favor of the theory that mathematics is not just a human invention but rather an inherent feature of space-time itself.

Reassessment of the fatigue life for wind turbines structural components is typically performed using deterministic methods with the same partial safety factors as used for the original design. However, in relation to life extension, the conditions are generally different from the assumptions used for calibration of partial safety factors; and using a deterministic assessment method with these partial safety factors might not lead to optimal decisions. In this paper, the deterministic assessment method is compared to probabilistic and risk-based approaches, and the economic feasibility is assessed for a case wind farm. Using the models also used for calibration of partial safety factors in IEC61400-1 ed. 4 it is found that the probabilistic assessment generally leads to longer additional fatigue life than the deterministic assessment method. The longer duration of the extended life can make life extension feasible in more situations. The risk-based model is applied to include the risk of failure directly in the economic feasibility assessment and it is found that the reliability can be much lower than the target for new turbines, without compromising the economic feasibility.

Nowadays, the development of civilization requires a vision of balancing the interests of employees and employers in the sphere of work as never before. Work-life balance is directly linked to social sustainability. The aim of this article is to analyse various dimensions of mutual enrichment of the professional and private life of an individual and to describe how positive experiences in professional and non-professional life influence the improvement of satisfaction, health and achievements, thus enabling the sustainable development of the individual. The conducted research was of a qualitative nature. Thematic exploration was used to analyse the findings of 34 in-depth interviews with experienced HR managers and employees at various levels of enterprises in Poland. The research shows that the work and personal life of the respondents interact, complement, and enrich in different ways, depending on the stage of the employee’s life. Habits developed by practicing a specific sport discipline or other type of hobby are helpful in the effective implementation of professional tasks. Also, non-professional interests, including communing with culture and art have a positive impact on professional activities. On the other hand, the respondents emphasized that thanks to their professional activities, specific to the type of work they perform, they are sometimes more extroverted, meticulous, organized and consistent when performing activities outside of work and in other aspects of private life.

With a reduction in the mortality rate of burn patients, patient length of stay (LOS) is increasingly adopted as an outcome measure. Some studies have attempted to identify factors that explain a burn patient's expected LOS. However, few have investigated the association between LOS and a patient's mental and socioeconomic status. There is anecdotal evidence for links between these factors and uncovering these will aid in better addressing the specific physical and emotional needs of burn patients, and facilitate the planning of scarce hospital resources. Here, we employ machine learning (clustering) and statistical models (regression) to investigate whether a segmentation by socioeconomic/mental status can improve the performance and interpretability of an upstream predictive model, relative to a unitary model derived for the full adult population of patients. Although we found no significant difference in the performance of the unitary model and segment-specific models, the interpretation of the segment-specific models reveals a reduced impact of burn severity in LOS prediction with increasing adverse socioeconomic and mental status. Furthermore, the models for the socioeconomic segments highlight an increased influence of living circumstances and source of injury on LOS. These findings suggest that, in addition to ensuring that the physical needs of patients are met, management of their mental status is crucial for delivering an effective care plan.

The objective of this study was aimed to study the sensory processes of the “human-computer interaction” model when classifying visual images with an incomplete set of signs based on the analysis of early, middle, late and slow components of event-related potentials (ERPs). 26 healthy subjects (men) aged 20-22 years were investigated. ERPs in 19 monopolar sites according to the 10/20 system were recorded. Discriminant and factor analysis were applied. The component N450 is the most specialized indicator of the perception of unrecognizable (oddball) visual images. The amplitude of the ultra-late components N750 and N900 is also higher under conditions of presentation of the oddball image, regardless of the location of the registration points. The results of the study are discussed in the light of the paradigm of the P300 wave application in brain-computer interface systems, as well as with the peculiarities in brain pathology. Promising directions for the development of studies of the “Brain Computer Interface” (BCI) P300 systems are to increase the throughput of information flows. To extend the application of the P300 ERPs to multiple modalities, the underlying physiological mechanisms and responses of the brain for a particular sensory system and mental function must be carefully examined.

(1) Aims: To analyse the relationship between demographic and clinical characteristics and particular kinds of suicidal behaviour and its relationship with a nurse-led suicide prevention program. (2) Methods: A 5-year cross-sectional study design. Study performed in the region of Osona (Catalonia) during 2013-2017. Suicidal behaviour was classified as suicidal ideation, interrupted self-directed violence, suicide attempt and completed suicide. (3) Results: The sample included 753 patients ─ of whom 53 died by suicide─ and encompassed 931 suicidal behaviour episodes. Men represented 38.4% of the sample but 81.1% of deaths by suicide. Mental disorders were associated with suicidal behaviour in 75.4% of the sample. 66.4% of the individuals were engaged in the nurse-led Suicidal Behaviour Case Management Program, of which 0.8% (n=4) died by suicide. (4) Conclusion: The main risk factors were female sex for suicidal behaviour, and male sex and older age for suicide. Mental disorders, widowhood and retirement were also associated with suicide. A high proportion of patients was engaged to the nurse-led suicide prevention program with a low proportion of suicides.

The Strawberry Line is a linear Local Nature Reserve extending along a dismantled railway corridor in North Somerset, England. The Reserve is cherished as a recreational resource by local communities and I am very fortunate to live beside it. During the COVID-19 lockdown of spring 2020, I decided to make use of my permissible daily exercise to record the distribution of breeding birds along my particular ‘patch’ of the Strawberry Line - the Vale of Winscombe section in the Mendip Hills. In describing the Reserve’s birdlife, I hope that I can provide an added layer of interest for locals and visitors, which might help in these difficult times deliver an enhanced dose of ‘Nature’s Fix’ and perhaps also shine a light towards a greater appreciation and connection with the natural world.

In this paper, the authors employ Mountain Pass Lemma, the method of weak solution regularization and Lyapunov function method to derive the unique existence of globally exponential stable positive stationary solution of a single-species model with diffusion and delayed feedback. The obtained stability criterion illuminates that under some suitable conditions, a certain internal competition is conducive to the overall stability of the population, and a certain amount of family planning is conducive to the overall stability of the population. A numerical example and three tables show the effectiveness of the proposed methods.

Within the scope of observed materialistic physical systems, without addressing the roots of H-Bar and big G, it is impossible to construct a workable model of final unification. With reference to our earlier proposed three large atomic gravitational constants, it is possible to reform and compactify the 10 dimensional String theory to 3+1 dimensions

IoT system becomes hot topic nowadays for smart home, IoT helps devices to communicate together without human intervention inside home, so it is offering many challenges. A new smart home IoT platform powered using electromagnetic energy harvesting is proposed in this paper. It contains a high gain transmitted antenna array and efficient circular polarized array rectenna system to harvest enough power from any direction to increase life time of the batteries used in IoT system. Optimized energy consumption, the software with adopting the Zigbee protocol of the sensor node and low power microcontroller are used to operate in lower power modes. The proposed system has an 84.6 days lifetime which is approximately 10 times the lifetime for similar system. On the other hand, the proposed power management circuit operated at 0.3 V DC to boost the voltage to ~3.7V from radio frequency energy harvesting and manage battery level to increase the batteries lifetime. A predictive indoor environment monitoring system is designed based on a novel hybrid system to provide a non-static plan, approve energy consumption and avoiding failure of sensor nodes in smart home.

In the design of multi-loop Networked Control Systems (NCSs) wherein each control system is characterized by heterogeneous dynamics and associated with certain set of timing specifications and constraints, appropriate metrics need to be employed for the synthesis of control and networking policies to efficiently respond to the requirements of each control loop. Majority of the design approaches for sampling, scheduling and control policies include either time-based or event-based metrics to perform pertinent actions in response to the changes of the parameters of interest. We specifically focus in this article on Age-of-Information (AoI) as a recently-developed time-based metric and threshold-based triggering function as a generic event-based metric. As the NCS model, we consider multiple heterogeneous stochastic linear control systems that close their feedback loops over a shared-resource communication network. We investigate the co-design across the NCS, and discuss the pros and cons with AoI and ET approaches in terms of asymptotic control performance measured by linear-quadratic Gaussian (LQG) cost functions. In particular, sampling and scheduling policies combining AoI and stochastic event-triggered metrics are proposed. It is argued that pure AoI functions that generate decision variables solely upon minimizing the average age irrespective of control systems dynamics may not be able to improve the overall NCS performance even compared with pure randomized policies. Our theoretical analyses are successfully validated through several simulation scenarios.

The out-of-time-ordered correlation (OTOC) function is an important new probe in quantum field theory which is treated as a significant measure of random quantum correlations. In this paper, with the slogan "Cosmology meets Condensed Matter Physics" we demonstrate a formalism using which for the first time we compute the Cosmological OTOC during the stochastic particle production during inflation and reheating following canonical quantization technique. In this computation, two dynamical time scales are involved, out of them at one time scale the cosmological perturbation variable and for the other the canonically conjugate momentum is defined, which is the strict requirement to define time scale separated quantum operators for OTOC and perfectly consistent with the general definition of OTOC. Most importantly, using the present formalism not only one can study the quantum correlation during stochastic inflation and reheating, but also study quantum correlation for any random events in Cosmology. Next, using the late time exponential decay of cosmological OTOC with respect to the dynamical time scale of our universe which is associated with the canonically conjugate momentum operator in this formalism we study the phenomena of quantum chaos by computing the expression for {\it Lyapunov spectrum}. Further, using the well known Maldacena Shenker Stanford (MSS) bound, on Lyapunov exponent, λ≤2π/β, we propose a lower bound on the equilibrium temperature, T=1/β, at the very late time scale of the universe. On the other hand, with respect to the other time scale with which the perturbation variable is associated, we find decreasing but not exponentially decaying behaviour, which quantifies the random correlation at out-of-equilibrium. Finally, we have studied the classical limit of the OTOC to check the consistency with the large time limiting behaviour.

The study investigates the determinants of mobile Internet banking adoption among Gen-Y in Malaysia. Align the issue of the study and research objectives, and the study underpinned Technology Acceptance Model (TAM) as the main guideline or a blueprint to analyze the research model. The study applied survey research design and analyzed using Structural Equation Modelling (SEM) under the PLS-SEM technique with SmartPLS 2.0. A total of 358 mobile internet banking users in Malaysia were random proportional selected as respondents and analyzed. Results from the partial least square structural equation modeling (PLS-SEM) revealed that perceived ease of use, perceived usefulness, facilitating condition, and personal innovativeness in IT have significantly influenced the attitude of mobile internet banking adoption in Malaysia. Additionally, perceived ease of use and facilitating conditions found to have a significant influence on the perceived usefulness of Mobile Internet Banking. Lastly, facilitating conditions and personal innovativeness in IT are significantly influence the perceived ease of use of mobile internet banking among Gen-Y in Malaysia

Unrecorded alcohol comprises all types of alcohol that is not registered in the jurisdiction where it is consumed. In some countries in Central and Eastern parts of Europe as well as the Balkan, the major amount of unrecorded alcohol consumption may derive from homeproduction of fruit spirits. Some studies found a high prevalence of lead and cadmium in such spirits. This article provides a quantitative comparative risk assessment using the margin of exposure (MOE) methodology for lead and cadmium, compared to ethanol, for unrecorded fruit spirits. For average concentration levels, the lowest MOE (0.8) was calculated for ethanol (alcohol itself). For lead, the MOE was 13 for moderate daily drinking and 0.9 for the worst case. For cadmium, the MOE was 1982 for moderate daily drinking and 113 for the worst case. The results of this study are consistent with previous comparative risk assessments that ethanol itself comprises by far the highest risk of all compounds in alcoholic beverages. Regarding the metal contaminants, the risk of cadmium appears negligible, however, lead may pose an additional health risk in heavy drinking circumstances. Strategies to avoid metal contamination in settings of artisanal homeproduction of spirits need to be developed.

We analyzed the peak spring tidal current speeds, annual mean tidal power densities (TPD) and annual energy production (AEP) obtained from experiment 06.1, referred as the "HYCOM model" throughout, of the three dimensional (3D), global model HYCOM in an area covering the Baja California Pacific and the Gulf of California. The HYCOM model is forced with astronomical tides and surface winds alone, and therefore is particularly suitable to assess the tidal current and wind-driven current contribution to in-stream energy resources. We find two areas within the Gulf of California, one in the Great Island Region and one in the Upper Gulf of California, where peak spring tidal flows reach speeds of 1.1 meters per second. Second to fifth-generation tidal stream devices would be suitable for deployment in these two areas, which are very similar in terms of tidal in-stream energy resources. However, they are also very different in terms of sediment type and range in water depth, posing different challenges for in-stream technologies. The highest mean TPD value when excluding TPDs equal or less than 50 W/m² (corresponding to the minimum velocity threshold for energy production) is of 172.8 W/m², and is found near the town of San Felipe, at (lat lon) = (31.006 -114.64); here energy would be produced during 39.00% of the time. Finally, wind-driven currents contribute very little to the mean TPD and the total AEP. Therefore, the device, the grid, and any energy storage plans need to take into account the periodic tidal current fluctuations, for optimal exploitation of the resources.

Spatial planning processes generally consider three levels of planning, which are applied to three types of territory: state, county and city. As the coastal areas are of a significant natural, cultural, economic and social value, as well as are characterized by a diverse range of involved society with specific interests and needs, there is a necessity for an innovative and new approach to sustainable development planning in accordance with the modern age of growth, as well as to work with local communities in specific areas. Planning of a small populated area like village territory is more diverse and subject to the wishes and needs of the population. Small territory planning involves a very narrow circle of individuals or communities that identify spatial development needs for the future, including socio-economic, cultural, and environmental and climate change scenarios. In order to assess the development opportunities and needs of the area, it is necessary to monitor the area by regularly updating data. As it is well known, methodically derived data (facts) provide objectivity and transparency. Nowadays, when information about the present and the past is circulating very fast, it is possible to analyze the current situation, to forecast the future using databases, and to show several constructed realities (scenarios) using the geographic information system (GIS). Therefore, it is crucial to explore and find out the local needs-based planning approach to the development of village in coastal areas.

Recent astronomical observations with respect to measurements in distant supernovas, cosmic microwave background and weak gravitational lensing confirm that the Universe is undergoing a phase of accelerated expansion and it has been proposed that this cosmological behavior is caused by a hypothetical dark energy which has a strong negative pressure that allows explain the expanding universe. Several theoretical ideas and models related dark the energy includes the cosmological constant, quintessence, Chaplygin gas, braneworld and tachyonic scalar fields. In this paper, we have obtained new relativistic stellar configurations considering an anisotropic fluid distribution with a charge distribution which could represents a potential model of a dark energy star. In order to investigate the effect of a quadratic equation of state in this anisotropic model we specify particular forms for the gravitational potential that allow solving the Einstein-Maxwell field equations. For these new solutions we checked that the radial pressure, metric coefficients, energy density, anisotropy factor, charge density , mass function are well defined and are regular in the interior of the star. The solutions found can be used in the development of dark energy stars models satisfying all physical acceptability conditions but the causality condition and strong energy condition are violated. We expect that these models have multiple applications in astrophysics and cosmology.

Research into professionalization in health and safety has recently gained in interest. Graduate training is one of the factors that determines or conditions the role of the safety professional, thus intervene in the professionalization process. This article is the result of a workshop and the discussions of nine academic directors of safety education programs about quality evaluation. This article introduces the issue with a historic overview of safety education, presents a synthesis of nine selected education programs, discusses quality evaluation of health and safety education programs, propose a quality evaluation frame and finally, proposes a process for designing a quality safety education program with an associated model of the learning objectives. The outcomes are interesting for everyone who is interested in health and safety education and quality evaluation and will give insights into how safety professionals are educated.

Synthetic chalcomenite-type cupric selenite CuSeO₃∙2H₂O has been studied at room temperature under compression up to pressures of 8 GPa by means of single-crystal X-ray diffraction, Raman spectroscopy, and density-functional theory. According to X-ray diffraction, the orthorhombic phase undergoes an isostructural phase transition at 4.0(5) GPa with the thermodynamic character being first-order. This conclusion is supported by Raman spectroscopy studies which have detected the phase transition at 4.5(2) GPa and by the first-principles computing simulations. The structure solution at different pressures has provided information on the change with pressure of unit-cell parameters as well as on the bond and polyhedral compressibility. A Birch-Murnaghan equation of state has been fitted to the unit-cell volume data. We found that chalcomenite is highly compressible with a bulk modulus of 42 – 49 GPa. The possible mechanism driving changes in the crystal structure is discussed, being the behavior of CuSeO₃∙2H₂O mainly dominated by the large compressibility of the coordination polyhedron of Cu. On top of that, an assignation of Raman modes is proposed based upon density-functional theory and the pressure dependence of Raman modes discussed. Finally, the pressure dependence of phonon frequencies is also reported.

Children’s beneficial relationships with animals are well known. Companion animals, particularly dogs have become an integral part of family life and children’s material culture. Aside the proven physiological benefits there is little research about what children say about their relationships with animals and how they describe them. In this paper we bring together both horse-human and dog-human interactions, finding common ground for understanding the complexity of human development, well-being and flourishing. Dogs in schools are fast becoming a trend in helping support and enhance children’s learning as well as their social and emotional well-being. Studies have shown that the very presence of a dog can increase children’s concentration, executive function and behavior. Also, equine therapy is gaining momentum and empirical studies are showing noteworthy benefits to children and young people. However, the lack of children’s voices means that the mechanisms for these benefits are somewhat unknown and unclear. In seeking to explore this, the authors utilize a visual, sensory and diffractive ethnographic approach to illuminate and illustrate, experiment and re-enact, how the children relate, share spaces and multiple subjectivities with their classroom canine, “Ted” and companion horse “Henry”. ”Henry” is part of a programme in which youngsters care for and engage in activities with horses.

It is unclear which noise exposure time window and noise characteristics during nighttime are most detrimental for sleep quality in real life settings. We have conducted a field study with 105 volunteers wearing a wrist actimeter to record their sleep during seven days, together with concurrent outdoor noise measurements at their bedroom window. Actimetry recorded sleep latency increased by 5.6 minutes (95% confidence interval: 1.6 to 9.6 minutes) per 10 dB(A) increase in noise exposure during the first hour after bedtime. Actimetry assessed sleep efficiency was significantly reduced by 2-3 percent per 10 dB(A) increase in measured outdoor noise (Leq, 1h) for the last three hours of sleep. For subjectively reported sleepiness, noise exposure during the last hour prior to wake up was most crucial with an increase in the sleepiness score of 0.31 units (95% CI: 0.08 to 0.54) per 10 dB(A) Leq,1h. Associations for estimated indoor noise were not more pronounced than for outdoor noise. Considering noise events in addition to equivalent sound pressure levels (Leq) only marginally improved the statistical models. Our study provides evidence that matching the nighttime noise exposure time window to the individual’s diurnal sleep-wake pattern results in a better estimate of detrimental nighttime noise effects on sleep. We found that noise exposure at the beginning and the end of the sleep is most crucial for sleep quality.

Fluid mechanics of flow in hydrophobic, rectangular microchannels with finite aspect ratios is of paramount importance. In such microchannels, not only the effect of the side walls should be taken into account, but also the classical assumption of no-slip boundary condition (BC) is no longer valid at the solid-liquid interface. Accordingly, slip flow can occur in microchannels fabricated from surfaces with low wetting conditions, hydrophobic surfaces. Determining the interactions of liquid molecules adjacent to solid surface is still a challenging issue, and it is especially important in small scale domains. Herein, the fluid mechanics of flow through rectangular hydrophobic microchannels has been reconsidered by taking into account the general Navier-slip BCs at the solid-liquid interface. For fully developed incompressible flow in microchannels at low Reynolds number, partial differential equation (PDE) of the momentum equation simplifies to the classical Poisson equation. Accordingly, by analytically solving the Poisson equations with general Navier-slip BCs, the most general forms of velocity distributions, flow rate, friction factor and Poiseuille number have been obtained.

In this work, we study the weak gravitational lensing in the background of Kerr-Newman black hole with quintessential dark energy. Initially, we compute the deflection angle of light by charged black hole with quintessential dark energy by utilizing the Gauss-Bonnet theorem. Firstly, we suppose the light rays on the equatorial plane in the axisymmetric spacetime. In doing so, we first find the corresponding optical metrics and then calculate the Gaussian optical curvature to utilize in Gauss-Bonnet theorem. Consequently, we calculate the deflection angle of light for rotating charged black hole with quintessence. Additionally, we also find the deflection angle of light for Kerr-Newman black hole with quintessential dark energy. In order to verify our results, we derive deflection angle by using null geodesic equations which reduces to the deflection angle of Kerr solution with the reduction of specific parameters. Furthermore, we analyze the graphical behavior of deflection angle $\Theta$ w.r.t to quintessence parameter $\alpha$, impact parameter $b$, BH charge $Q$ and rotation parameter $a$. Our graphical analysis retrieve various results regarding to the deflection angle by the Kerr-Newman black hole with quintessential dark energy.

Although different assessments and evaluations of Dual-Miller cycle performed, specified output power and thermal performance associated with engine determined. Besides, multi objective optimization of thermal efficiency, Ecological Coefficient of performance ( ) and Ecological function ( ) by the mean of NSGA-II technique and thermodynamic analysis performed. The Pareto optimal frontier obtaining the best optimum solution is chosen by fuzzy Bellman-Zadeh, LINMAP, and TOPSIS decision-making techniques. Based on the results, performances of dual-Miller cycles and their optimization are improved.

1) Background: A population-based cross-sectional study was conducted to understand how green cover and accessibility of common public open spaces in compact urban areas affect physical activeness of resident. 2) Methods: A total of 554 residents completed a structured questionnaire on quality-of-life, physical activity level, and healthy eating practice. 3) Results: The sampled population lived with green cover averaged 10.11 ± 7.95% (ranged 1.56–9.88), whereas majority (90%) of the residents performed physical activities at medium and high levels. Metabolic Equivalent of Task (MET)-minutes/week was associated with the green cover percentage (Pearson r = 0.092; p < 0.05). Irrespective of age and physical activity level, active residents commonly used public open spaces within district for performing exercise, especially parks and promenade were mostly used by older residents while sports facilities by the younger groups. 4) Conclusions: Current findings suggested promotion of exercise could be achieved by the design or redesign of built environment to include more parks accessible to the residents with the increase of vegetation.

The effects of heating rate before solution treatment and cooling rate after solution treatment on the morphological distribution and evolution of precipitation phase of nickel-based single crystal superalloy were studied. The dissolution, precipitation and growth of precipitation phase and matrix phase during heat treatment were analyzed by means of high power scanning electron microscopy. The results show that the morphology of precipitated phase has nothing to do with the distribution of precipitated phase and the heating rate in the heating process, but the cooling rate in the cooling process affects the shape, size and distribution of precipitated phase. The faster the cooling rate, the smaller the precipitated phase is, the more irregular the shape is, the smaller the equivalent edge length is, and the smaller the channel width of matrix phase is.

Deep learning has taken over - both in problems beyond the realm of traditional, hand-crafted machine learning paradigms as well as in capturing the imagination of the practitioner sitting on top of petabytes of data. While the public perception about the efficacy of deep neural architectures in complex pattern recognition tasks grows, sequentially up-to-date primers on the current state of affairs must follow. In this review, we seek to present a refresher of the many different stacked, connectionist networks that make up the deep learning architectures followed by automatic architecture optimization protocols using multi-agent approaches. Further, since guaranteeing system uptime is fast becoming an indispensable asset across multiple industrial modalities, we include an investigative section on testing neural networks for fault detection and subsequent mitigation. This is followed by an exploratory survey of several application areas where deep learning has emerged as a game-changing technology - be it anomalous behavior detection in financial applications or financial time-series forecasting, predictive and prescriptive analytics, medical imaging, natural language processing or power systems research. The thrust of this review is on outlining emerging areas of application-oriented research within the deep learning community as well as to provide a handy reference to researchers seeking to embrace deep learning in their work for what it is: statistical pattern recognizers with unparalleled hierarchical structure learning capacity with the ability to scale with information.

The purpose of this study is to improve the performance of walls under out-of-plane loads, particularly when subjected to the hammering action of the floors. The idea behind the paper is to provide the masonry walls with a device that behaves like a buttress, without having to build a traditional buttress. The solution presented here consists of a mechanical coupling between the three-dimensional net of steel ribbons of the CAM system and the CFRP strips. Since the steel ribbons of the CAM system have a pre-tension, the mechanical coupling allows the steel ribbons to establish a semi-rigid transverse link between the CFRP strips bonded on two opposite sides of a wall. Therefore, two vertical CFRP strips tied by the steel ribbons behave like the flanges of an I-beam and the flexural strength of the ideal I-beam counteracts the out-of-plane displacements of the wall. The experimental results showed that the combined technique inherits the strong points of both constituent techniques: the delamination load is comparable to that of the specimens reinforced with the CFRP strips and the overall behavior is ductile as for the specimens reinforced with the CAM system. They also allowed us to design a more performing combined technique.

As novel materials for carbon capture, phase change solvents can separate into two immiscible phases during the CO2 capturing procedure under a certain temperature. The solvent systems can significantly decrease the energy consumption since the solvents can be regenerated by only heating the rich-CO2 phase. In this work, amino acid ionic liquids (AAILs) were synthesized using quaternary ammonium salts and amino acids as raw materials, and the aqueous solutions were prepared as novel liquid-solid phase change solvents. The results showed that the solvents had excellent CO2 absorption capacity, and the AAILs functionalized by glycine and tryptophan exhibited significant phase change properties. The mechanism of phase-change of the solvent were mainly due to the lower solubility of the product after reaction between AAILs and CO2. The solvent with tryptophan as anion could be regenerated by only heating the CO2-riched solid phase, which might significantly decrease energy consumption of regeneration. And the absorbent could be reused with the regenerated absorption ratio up to 79%. The solvent system has great potential in industrial application due to the easy operation process and efficient recycling ability.

Background: Kidney transplantation is considered the first-choice therapy in ESRD patients. Despite recent improvements in terms of outcomes and graft survival in recipients, postoperative complications still concern health-care providers involved in the management of those patients. Particularly challenging are cardiovascular complications. Perioperative goal-directed fluid-therapy (PGDT) and hemodynamic optimization are widely used in high-risk surgical patients, and are associated with a significant reduction in postoperative complication rates and length of stay (LOS). The aim of this work is to compare the effects of perioperative goal-directed therapy (PGDT) with conventional fluid therapy (CFT), and to determine whether there are any differences in major postoperative complications rates and delayed graft function (DGF) outcomes. Methods: Prospective study with historical controls. Two groups, a PGDT- and a CFT- group were used: the stroke volume (SV) optimization protocol was applied in PGDT group throughout the procedure. Conventional fluid therapy with fluids titration at a central venous pressure (CVP) 8-12 mmHg and mean arterial pressure (MAP) >80mmHg was applied to the control-group. Postoperative data collection including vital signs, weight, urinary output, serum creatinine, blood urea nitrogen, serum potassium, and assessement of volemic status and the signs and symptoms of major postoperative complications occurred at 24h, 72h, 7 days and 30 days after transplantation. Results: Among the 66 patients enrolled, 33 were in each group and both groups had similar physical characteristics. Good fuctional recovery was evident in the 94% of patients. The statistical analysis has showed a difference in postoperative complications as follows: significant reduction of cardiovascular complications, DGF episodes (p<0.05) and surgical complications (p<0.01). There were no significant differences in pulmonary or other complication. Conclusions: PGDT and SV optimization effectively influenced the rate of major postoperative complications, reducing the overall morbidity and thus the mortality in patients receiving kidney transplantation.

Machine fault diagnosis systems need to collect and transmit dynamic monitoring signals, like vibration and current signals, at high-speed. However, industrial wireless sensor networks (IWSNs) and Industrial Internet of Things (IIoT) are generally based on low-speed wireless protocols, such as ZigBee and IEEE802.15.4. To address this tension when implementing machine fault diagnosis applications in IIoT, this paper proposes a novel IWSN with on-sensor data processing. On-sensor wavelet transforms using four popular mother wavelets are explored for fault feature extraction, while an on-sensor support vector machine classifier is investigated for fault diagnosis. The effectiveness of the presented approach is evaluated by a set of experiments using motor bearing vibration data. The experimental results show that compared with raw data transmission, the proposed on-sensor fault diagnosis method can reduce the payload transmission data by 99.95%, and reduce the node energy consumption by about 10%, while the fault diagnosis accuracy of the proposed approach reaches 98%.

This paper studies an effective finite difference scheme for solving two-dimensional Heston stochastic volatility option pricing model problems. A dynamically balanced up-downwind strategy for approximating the cross-derivative is implemented and analyzed. Semi-discretized and spatially nonuniform platforms are utilized. The numerical method comprised is simple, straightforward with reliable first order overall approximations. The spectral norm is used throughout the investigation and numerical stability is proven. Simulation experiments are given to illustrate our results.

Sustainability, sustainable development and education for sustainable development are increasingly central concepts, both in social practice and in the field of scientific knowledge. Sociology, and in particular Sociology of Education as a specialised Sociology, can provide relevant contributions in its promotion. This article aims to explore the importance of Sociology of Education in promoting sustainability literacy in higher education, using the Sustainable Development Goals and key competencies (United Nations and UNESCO) as the central reference in this field, and intends, thus, to become an added contribution for this discussion. The article seeks to demonstrate that the learning of sustainability literacy would benefit from the use of a sociological stance throughout this whole process that considers dimensions that are often not directly emphasised and articulated between each other, such as: interconnection of scale levels, sociological imagination, multi-paradigmatic nature, heuristic interdisciplinarity, reflexivity and use of Sociology for action.

Background: Video assisted thoracoscopic surgery (VATS) has become the recommended approach for treatment of resectable lung cancer. However, no large randomized clinical trial has been conducted formally comparing surgical resections completed by VATS to those done by open thoracotomy (OT) in low volume centers. The current study sought to assess differences in recurrence-free survival (RFS), overall survival (OS), positive margins and postoperative length of stay (LOS) between VATS and OT lobectomies in our center. Method: A single institution retrospective chart review from May 2005 through May 2015 was conducted. All patients diagnosed with stage I through III lung cancer who underwent surgical resection were selected. Patient and tumor characteristics recorded included age at diagnosis, sex, tobacco use, tumor location (side and lobe), stage, size and receipt of chemotherapy or radiotherapy. Chis-square and Wilcoxon-Mann-Whitney tests were used to compare demographics, tumor characteristics and LOS. Multiple logistic and Cox regression analyses were used to compute relative risk (RR) for positive margins and mortality hazard ratios along with 95 percent confidence intervals (95%CI), respectively. Results: Of the 235 patients, 101 subjects had VATS while OT was performed in 134 patients. Age at diagnosis, sex, tobacco use, tumor location, and size were comparable for VATS and OT. No significant difference was observed in the relative risk of positive margins for VATS versus OT, RR = 0.56 (95%CI = 0.26, 1.05). However, VATS had shorter median LOS compared to OT (4 vs. 6 days, respectively), p = 0.002. A comparison of VATS versus OT showed no significant difference in the risk of recurrence, HR = 1.21 (95%CI = 0.74, 2.00), or death, HR = 1.34 (95%CI = 0.88, 2.06), in the intent-to-treat population. Similarly, no significant differences in recurrence or mortality risk were observed between VATS versus OT for analyses conducted separately for each cancer stage group or those limited to patients with negative margins. Conclusion: Our study indicates that compared to OT, VATS leads to shorter LOS while achieving comparable margins status, recurrence-free and overall survival regardless of tumor stage at diagnosis.

A finite-type immersion or smooth map is a nice tool to classify submanifolds of Euclidean space, which comes from eigenvalue problem of immersion. The notion of generalized 1-type is a natural generalization of those of 1-type in the usual sense and pointwise 1-type. We classify ruled surfaces with generalized 1-type Gauss map as part of a plane, a circular cylinder, a cylinder over a base curve of an infinite type, a helicoid, a right cone and a conical surface of $G$-type.

Ovarian Cancer (OC) is a type of cancer that affects ovaries in women, and is difficult to detect at initial stage due to which it remains as one of the leading causes of cancer death. The ovarian cancer data generated from the Internet of Medical Things (IoMT) was used and a novel approach was proposed for distinguishing the ovarian cancer by utilizing Self Organizing Maps (SOM) and Optimal Recurrent Neural Networks (ORNN). SOM algorithm was utilized for better feature subset selection and was also utilized for separating profitable, understood and intriguing data from huge measures of medical data. In supervised learning techniques, the SOM-based feature selection seems to be a tougher challenge because of the absence of class labels that would guide the search for relevant information to the classifier model. The classification approach can identify ovarian cancer data as benign/malignant. The ovarian cancer detection process can be improved by optimizing the weights of RNN structure using Adaptive Harmony Search Optimization (AHSO). The proposed model in this study can be used to detect cancer at early stages with high accuracy and low Root Mean Square Error (RMSE).

Control as a Service (CaaS) is an emerging paradigm where low-level control of a device is moved from a local controller to the Cloud, and provided to the device as an on-demand service. Among its many benefits, CaaS gives the device access to advanced control algorithms which may not be executable on a local controller due to computational limitations. As a step toward 3D printer CaaS, this paper demonstrates the control of a 3D printer by streaming low-level stepper motor commands (as opposed to high-level G-codes) directly from the Cloud to the printer. The printer is located at the University of Michigan, Ann Arbor, while its stepper motor commands are calculated using an advanced motion control algorithm running on Google Cloud computers in South Carolina and Australia. The stepper motor commands are sent over the Internet using the user datagram protocol (UDP) and buffered to mitigate transmission delays; checks are included to ensure accuracy and completeness of the transmitted data. All but one part printed using the cloud-based controller in both locations were hitch free (i.e., no pauses due to excessive transmission delays). Moreover, using the cloud-based controller, the parts printed up to 54% faster than using a standard local controller, without loss of accuracy.

We report the results of an analysis of the functional capabilities of the KTP crystal and its isomorphs for nonlinear-optical frequency conversion of all types of interaction in the transparency range of the crystal. The possibility of implementing angle-, wavelength- (frequency-) and temperature-noncritical phase matching is shown.

Alternative fuels available at low cost, friendly to natural environments and meet the energy needs and demands, have witnessed a growing demand and use today. Ethanol is an attractive renewable energy source with a high content of oxygen. Ethanol can be produced through ethanolisis, however for this work direct blending of conventional diesel, waste plastic pyrolysis oil and ethanol with commercial fuel improver CI-0808 purchased from Innospec company was attempted. The primary purpose of adding a cetane improver was to improve the combustion characteristics of the blends by at least 1- 3 ignition quality points. Five mixing ratios were chosen in the following order, 50:25:25, 60: 20:20, 70: 15:15, 80: 10:10 and 90: 5:5 for Waste Plastic Pyrolysis Oil (WPPO), ethanol and conventional diesel (CD) respectively. However, for the fuel additive mixing ratio the total volume percentage was considered and the ratio put at 0.01% of the total quantity of blended fuel. In this work WPPO, diesel blends and fuel additives improvers were used as alternative fuel. This was to evaluate their performance and emission characteristics in a stationary single cylinder water cooled experimental diesel engine. The CI-0808 was added due to its potential power to reduce emissions of CO, UHC, NO_X, PM and improved engine performance. The results obtained were compared carefully to ASTM standards and discussed using graph curves figures and tabulated values. The conclusion was that ethanol and WPPO blends can be used in diesel engines as alternative fuel without modification. Used in combination with cetane improvers the emissions reduce significantly and performance improved equalling that of conventional diesel fuel.

Accurate and stable cost forecasting of substation projects is of great significance to ensure the economic construction and sustainable operation of power engineering projects. In this paper, a forecasting model based on the improved least squares support vector machine (ILSSVM) optimized by wolf pack algorithm(WPA) is proposed to improve the accuracy and stability of the cost forecasting of substation projects. Firstly, the optimal features are selected through the data inconsistency rate (DIR), which helps reduce redundant input vectors. Secondly, the wolf pack algorithm is used to optimize the parameters of the improved least square support vector machine. Lastly, the cost forecasting method of WPA-DIR-ILSSVM is established. In this paper, 88 substation projects in different regions from 2015 to 2017 are chosen to conduct the training tests to verify the validity of the model. The results indicate that the new hybrid WPA-DIR-ILSSVM model presents better accuracy, robustness and generality in cost forecasting of substation projects.

While the Internet of Things (IoT) technology has been widely recognized as the essential part of Smart Cities, it also brings new challenges in terms of privacy and security. Access control (AC) is among the top security concerns, which is critical in resource and information protection over IoT devices. Traditional access control approaches, like Access Control Lists (ACL), Role-based Access Control (RBAC) and Attribute-based Access Control (ABAC), are not able to provide a scalable, manageable and efficient mechanism to meet the requirements of IoT systems. Another weakness in today's AC is the centralized authorization server, which can be the performance bottleneck or the single point of failure. Inspired by the smart contract on top of a blockchain protocol, this paper proposes BlendCAC, which is a decentralized, federated capability-based AC mechanism to enable an effective protection for devices, services and information in large scale IoT systems. A federated capability-based delegation model (FCDM) is introduced to support hierarchical and multi-hop delegation. The mechanism for delegate authorization and revocation is explored. A robust identity-based capability token management strategy is proposed, which takes advantage of the smart contract for registering, propagating and revocating of the access authorization. A proof-of-concept prototype has been implemented on both resources-constrained devices (i.e., Raspberry PI node) and more powerful computing devices (i.e., laptops), and tested on a local private blockchain network. The experimental results demonstrate the feasibility of the BlendCAC to offer a decentralized, scalable, lightweight and fine-grained AC solution for IoT systems.

Aim of expressional space is to facilitate the public to explore their hobby and talent in autodidact. The space for expression in Makassar City is necessary for the mural artist and the youngsters who has a hobby to play a skateboard. Their talent is insufficient attention by the government and create negative attitude because there no space to accommodate their activity. Therefore, this paper presents a design idea of expressional space by implementing the architectural geometry. The architectural geometry design principle is based on simple geometry form application as a realization of form from the space. An experience of the space for the user realizes by the relationship between the space and the interaction with the environment through geometry and form processing as the basic of the creation process in the architectural works. Content analysis method providing a landscape layout and transformation of form and building mass in form of the implementation of architectural geometry principles. The principles are pure geometry, composition of geometry, direction wall, and opening for the transformation process of expressional space form to produce and increase aesthetic value of the environment.

Let g be a strictly increasing function on $\left(a,b\right),$ having a continuous derivative g′ on $\left(a,b\right).$ For the Lebesgue integrable function $f:\left(a,b\right)\to \mathbb{C}$ , we define the k-g-left-sided fractional integral of f by $S_{k,g,a+}f\left(x\right)={\int }_a^{x}k\left(g\left(x\right)-g\left(t\right)\right)g^{\prime }\left(t\right)f\left(t\right)dt,x\in \left(a,b\right]$ and the k-g-right-sided fractional integral of f by $S_{k,g,b-}f\left(x\right)={\int }_x^{b}k\left(g\left(t\right)-g\left(x\right)\right)g^{\prime }\left(t\right)f\left(t\right)dt,x\in [a,b),$ where the kernel k is defined either on $\left(0,\infty \right)$ or on $\left[0,\infty \right)$ with complex values and integrable on any finite subinterval. In this paper we establish some Ostrowski and trapezoid type inequalities for the k-g-fractional integrals of functions of bounded variation. Applications for mid-point and trapezoid inequalities are provided as well. Some examples for a general exponential fractional integral are also given.

Cellular-based machine-to-machine (M2M) communication is expected to facilitate services for the Internet of Things (IoT). However, because cellular networks are designed for human users, they have some limitations. Random access channel (RACH) congestion caused by massive access from M2M devices is one of the biggest factors hindering cellular-based M2M services because the RACH congestion causes random access (RA) throughput degradation and connection failures to the devices. In this paper, we show the possibility exploiting the capture effects, which have been known to have a positive impact on the wireless network system, on RA procedure for improving the RA performance of M2M devices. For this purpose, we analyze an RA procedure using a capture model. Through this analysis, we examine the effects of capture on RA performance and propose a Msg3 power-ramping (Msg3 PR) scheme to increase the capture probability (thereby increasing the RA success probability) even when severe RACH congestion problem occurs. The proposed analysis models are validated using simulations. The results show that the proposed scheme, with proper parameters, further improves the RA throughput and reduces the connection failure probability, by slightly increasing the energy consumption. Finally, we demonstrate the effects of coexistence with other RA-related scheme through simulation result.

Repair mortar is commonly used to rehabilitate reinforced concrete structures or components that exhibit a relatively high level of distresses. Yet, this repair mortar can be contaminated by salt from its service environment. This work employs a two-dimensional finite element model to investigate the transport behavior of ionic species in salt-contaminated and water-saturated repair mortar under an externally applied electric field. The model was experimentally validated and then utilized to evaluate the effectiveness of electrochemical chloride extraction (ECE) with or without electrical injection of corrosion inhibitor (EICI). In the case study, both the ECE alone and the ECE+EICI treatment was found effective in decontaminating the zone in front of the steel rebar. In both techniques, the magnitude of current density has a significant effect on removing chloride out of the mortar and increasing the pH of the pore solution near the rebar, whereas the treatment time any not have a significant effect under some scenarios. The injection of the organic corrosion inhibitor significantly slowed down the removal of chloride. Changes in the ionic distribution in the mortar were generally beneficial in reducing the corrosion risk of the steel rebar and thus extending the service life of the repair mortar.