We consider the role information energy can play as a source of dark energy. Firstly, we note that, if stars and structure had not formed in the universe, elemental bits of information describing the attributes of particles would have exhibited properties similar to the cosmological constant. The Landauer equivalent energy of such elemental bits would be defined identical in form and value to the characteristic energy of the cosmological constant. But, with the formation of stars and structure, stellar heated gas and dust now provides the dominant contribution to information energy with the characteristics of a dynamic, transitional, dark energy. At low redshift, z<~1.35, this dark energy emulates the cosmological constant with a near constant energy density, w=−1.03±0.05, and an energy total similar to the mc² of the universe's ∼10⁵³ kg of baryons. At earlier times, z>~1.35, information energy was phantom, differing from the cosmological constant, Λ, by a CPL parameter difference of ∆w_o=−0.03±0.05 and ∆w_a=−0.79±0.08, values sufficient to account for the H₀ Tension. Information dark energy agrees with most phenomena as well as Λ, while exhibiting characteristics that resolve many tensions and problems of ΛCDM: the cosmological constant problem; the cosmological coincidence problem; the H₀ and σ₈ tensions. As this proposed dark energy source is not usually considered, we identify the expected signature in H(a) that will enable the role of information dark energy to be falsified by experimental observation.

The research presents the inter-comparison of atmospheric variables measured by 9 automatic meteorological stations. This set of data was compared with the measurements of other meteorological stations in order to standardize the values that must be adjusted when taken to different areas. The data of a set of a total of 9 GMX500, which measures conventional meteorological variables, and 10 WS100 sensors, which measures precipitation parameters. The automatic stations were set up at the Huancayo Observatory (Geophysical Institute of Peru) for a period of 5 months. The data set of GMX500 were evaluated comparing with the average of the 9 sensors and the WS100 was compared with a optical disdrometer Parsivel2. The temperature, pressure, relative humidity, wind speed, rainfall rate, and drop size distribution was evaluated. A pair of GMX500 sensors presented high data dispersion, it was found found that the errors came from a bad configuration; once this problem was solved, good agreement was archived, with low RMSE and high correlation. I was found that the WS100 sensors overestimate the precipitation with a percent bias close to 100% and the differences increase with the greater intensity of rain. The DSD retrieved by WS100 have unrealistic behavior with higher concentrations in diameters of 1 mm and 5 mm, in addition to a flattened curve.

The interband transitions of urania (UO2) are validated independently through cathode luminescence of UO2. A picture emerges consistent with density functional theory. While theory is generally consistent with experiment, it is evident that the choice of functional can significantly alter the band gap and some details of the band structure, in particular at the conduction band minimum. Strictly ab initio predictions of the optical properties of the actinide compounds, based on density functional theory alone continues to be somewhat elusive.

Gut protozoan parasites are neglected and not targeted by specific control initiatives and this have led to a knowledge gap concerning their regional diversity and epidemiology. The present study aims to explore Giardia duodenalis genetic diversity and assess the epidemiologic scenario of subclinical infections in different Brazilian biogeographic regions. Cross-sectional surveys (n=1,334 subjects) were conducted in the Amazon, Cerrado, Semiarid and Atlantic Forest. Microscopy of non-diarrheal feces and nucleotide sequencing of a β-giardin gene fragment were performed. Twenty-seven (52.9%) β-giardin sequences were characterized as assemblage A and 24 (47.1%) as assemblage B. In Amazon, assemblage B was the most frequently detected with 2 novel sub-assemblages. Assemblage A predominated in the extra-Amazon region, with 5 novel sub-assemblages. Prevalence rates reached 17.8% in Amazon, 8.8% in Atlantic Forest, 7.4% in Cerrado and 2.3% in the Semiarid. People living in poverty and extreme poverty presented significantly higher positivity rates, reaching 11.9% and 14.5%, respectively. Giardiasis tended to be more frequent in stunted (21.6%) than in eutrophic children (12.9%). In conclusion, subclinical giardiasis in endemic in Brazilian communities in different biogeographic regions, presenting high genetic diversity and a heterogeneous genotypic distribution.

Gol'denveizer's problem of a torus has been analyzed by Audoly and Pomeau (2002) and Sun (2021). However, all of the investigations of Gol'denveizer's problem of an elastic torus have been linear. In this paper, the finite element method is used to more accurately address this problem. Furthermore, Sun (2021) cannot be solved by nonlinear analysis. We research the nonlinear mechanical properties of Gol'denveizer's problem of circular and elliptic tori, and relevant nephograms are given. We study the buckling of Gol'denveizer's problem of an elastic torus, and propose failure patterns and force-displacement curves of tori in the nonlinear range. Investigations reveal that circular tori have more rich buckling phenomena as the parameter a increases. Gol'denveizer's problem of the buckling of an elliptic torus is analyzed, and we find a new buckling phenomenon called a "skirt." As a/b increases, the collapse load of an elliptic torus of the Gol'denveizer problem is enhanced gradually.

Bayesian nonlinear mixed effects models for data in the form of continuous, repeated measurements from a population, also known as Bayesian hierarchical nonlinear models, are a popular platform for analysis when interest focuses on individual specific characteristics and relevant uncertainty quantification. Due to the limitation of computational power, this framework was relatively dormant until the late 1980s, but in recent years, the statistical research community saw vigorous development of new methodological and computational techniques for these models, the emergence of software, and wide application of the models in numerous industrial and academic fields. This article presents an overview of the formulation, interpretation, and implementation of Bayesian nonlinear mixed effects models and surveys recent advances and applications.

The combination of interstitial hyperthermia treatment (IHT) with high dose rate brachytherapy (HDR-BT) for prostate cancer treatment and has the potential to improve clinical outcome, since it highly enhances the efficiency of cell kill, especially when applied simultaneously. Therefore, we have developed the ThermoBrachy applicators. To effectively apply optimal targeted IHT, treatment planning is considered essential. However, treatment planning in IHT is rarely applied since it is regarded difficult to accurately calculate the deposited energy in the tissue in a short enough time for clinical practice. In this study, we investigated various time-efficient methods for fast computation of the electromagnetic (EM) energy deposition resulting from the ThermoBrachy applicators. Initially, we investigated the use of an electro-quasistatic solver. Next, we extended our investigation to the application of geometric simplifications. Furthermore, we investigated the validity of the superpositioning principle, which can enable adaptive treatment plan optimization without the need for continuous recomputation of the EM field. Finally, we evaluated the accuracy of the methods by comparing them to the golden standard Finite-Difference Time-Domain calculation method using gamma-index analysis. The simplifications considerably reduced the computation time needed, improving from &gt;12 h to a few seconds. All investigated methods showed excellent agreement with the golden standard by showing a &gt;99% passing rate with 1%/0.5 mm Dose Difference and Distance-to-Agreement criteria. These results allow the proposed electromagnetic simulation method to be used for fast and accurate adaptive treatment planning.

Among the thermophysical properties, the surface / interfacial tension, viscosity and density / molar volume of liquid alloys are the key properties for the modelling of microstructural evolution during solidification. Therefore, only reliable input data can yield accurate predictions preventing the error propagation in numerical simulations of solidification related processes. Due to experimental difficulties related to reactivity of metallic melts at high temperatures, the measured data are often unreliable or even lacking. The application of containerless processing techniques either leads to a significant improvement of the accuracy or makes the measurement possible at all. On the other side, accurate model predicted property values could be used to compensate the missing data; otherwise, the experimental data are useful for the validation of theoretical models. The choice of models is particularly important for the surface, transport and structural properties of liquid alloys representing the two limiting cases of mixing, i.e. ordered and phase separating alloy systems. To this aim, the thermophysical properties of the Fe-Si and Cu-Pb systems were analysed and the connections with the peculiarities of their mixing behaviours are highlighted.

This study examines the relation between ambient air pollution and emergency department (ED) visits due to certain infectious diseases in Toronto, Canada. The National Ambulatory Care Reporting System database was used to draw the corresponding health cases. Daily data on ED visits, ambient air pollution concentration levels, and weather conditions during the period from April 2004 to December 2015 (4,292 days in total) were linked together and used in statistical models. Six air pollutants (fine particulate matter PM2.5, CO, NO2, SO2, ozone O3 as a daily average, and ozone O3-8 hour ozone, as a maximum eight hour average) were investigated. In addition, the Air Quality Health Index (combining NO2, O3, and PM2.5) was also considered. The time-stratified case-crossover technique was applied in the study design. Conditional Poisson models were created using the daily counts of ED visit data. The considered factors, air pollutants and weather, were lagged by the same number of days, from 0 to 14. In the period of the study 339,644 ED visits were identified; 177,619 for females and 162,025 for males. For each air pollutant 270 models were realized (15 lags x 18 strata). Ambient air pollution concentrations lagged by 2, 3, and 5 days have the highest impact on ED visits, with 34, 32, and 35 positive associations, respectively. For all patients and an increase in a one interquartile range (IQR=1.2 ppb) of sulphur dioxide, the following values of the relative risks (RR) were estimated: RR=1.005 (95% confidence interval: 0.998, 1.013), 1.008 (1.001, 1.016), 1.009 (1.001, 1.016), 1.011 (1.004, 1.019), 1.007 (0.987, 1.028), and 1.009 (1.002, 1.016) for lags from 0 to 5, respectively. The results suggest that exposures for certain air pollutants (mainly CO, O3, and SO2) in urban environment affect the number of ED visits related to infectious diseases.

Salinity acts as a critical environmental filter on microbial communities in natural systems, negatively affecting microbial diversity. However, how salinity affects the community assembly remains unclear. This study used Wendeng multi-pond saltern as a model to evaluate the prokaryotic community composition and diversity and quantify the relative importance of ecological processes across salinity gradients. Results showed that low saline salterns (45-80 g/L) exhibited higher bacterial diversity than those in high saline salterns (175-265 g/L). The relative abundance of taxa assigned to Halanaerobiaceae, Haloferacaceae, Desulfohalobiaceae, Phormidiaceae, Rohodobacteraceae, and Nitrococcaceae was higher with increasing salinity. Salinity and pH were the primary environmental factors that directly or indirectly determined the composition and diversity of prokaryotic communities. Microbial co-occurrence network dynamics were more complex in the sediment than in water of salterns. An infer Community Assembly Mechanisms by Phylogenetic-bin-based null model analysis (iCAMP) showed that microbial community assembly in sediment and water differed. Our findings provide more information about microbial community structure and the importance of various ecological processes in controlling microbial community diversity and succession along salinity gradients in water and sediment environments.

Malnutrition, unhealthy diets, and lifestyle changes have become major risk factors for non-communicable diseases while ad-versely impacting economic growth and sustainable development. Anthocyanins, a group of flavonoids that are rich in fruits and vegetables, contribute positively to human health. This review focuses on genetic variation harnessed through crossbreeding and biotechnology-led approaches for developing anthocyanins-rich fruit and vegetable crops. Significant progress has been made in identifying genes involved in anthocyanin biosynthesis in various crops. Thus, the use of genetics has led to the development and release of anthocyanin-rich crop cultivars in Europe and USA. Such a trend is emerging in the developing world. The purple pota-to “Kufri Neelkanth” has been released for cultivation in northern India, and a few colored grain wheat lines, developed through crossbreeding, are being tested for their productivity and adaptation. Although tomato is deficient in anthocyanins, some of its wild relatives are known to accumulate anthocyanins in their sub-epidermal fruit tissue. In Europe, anthocyanin-rich tomato cul-tivar ‘Sun Black’ developed via the introgression of Aft and atv genes has been released. The development of anthocyanin-rich food crops without any significant yield penalty has been due to the use of genetic engineering involving specific transcription factors or gene editing. The anthocyanin-rich food ingredients have the potential of being more nutritious than those devoid of anthocyanins. The inclusion of anthocyanins as a target characteristic in breeding programs can ensure the development of culti-vars to meet the nutritional needs for human consumption, particularly in the developing world.

Currently, the design and construction of embankments of roads, railroads and hydraulic structures are based on regulatory documents developed 25-30 years ago. For the construction of granite massifs it is necessary to use sandy soils, the distribution of which in the Arctic zone of Siberia in the areas of construction is not more than 1.5%. In this case, the range of transport of sand in the alluvial area is 35 kilometers, in the rest of the area - an average of 60 kilometers. Large volumes of soil massifs require large amounts of transportation units, fuel consumption and are accompanied by large emissions of hydrocarbons into the atmosphere. Over the past 15 years, the authors have developed designs and technologies that significantly reduce the energy consumption during the construction of soil embankments. Combined structures are cages made of geosynthetic materials filled with unsuitable melted and frozen overmoistened clay and peaty soils. This allowed the use of soils within the construction sites and thereby reduce the range of transportation from 0.2 to 2.0 kilometers. As an example, when reducing the range of transportation from 25 km to 1 km, the energy consumption is reduced by a factor of 21. The use of geosynthetics made it possible to set the initial parameters of the water-heat regime control process, which increased the life cycle of the embankment from 2 to 5 times in comparison with traditional soil massifs and reduced the consumption of energy for repair and maintenance of linear transport structures. This article gives a theoretical substantiation of water-heat regime management, based on which new designs and technologies have been proposed and tested in Siberia in 2008-2013. The results of the tests confirm the theoretical research. Thus, the use of combined constructions of geosynthetics and inapplicable soils not only reduces the distance of transportation, but also reduces the volume of earthworks. It reduces the consumption of energy by 1.5-2 times.

Skin cancer is an exquisite disease globally nowadays. Because of the poor contrast and apparent resemblance between skin and lesions, automatic identification of skin cancer is complicated. The rate of human death can be massively reduced if melanoma skin cancer can be detected quickly using dermoscopy images. In this research, an anisotropic diffusion filtering method is used on dermoscopy images to remove multiplicative speckle noise and the fast-bounding box (FBB) method is applied to segment the skin cancer region. Furthermore, the paper consists of two feature extractor parts. One of the two features extractor parts is the hybrid feature extractor (HFE) part and another is the convolutional neural network VGG19 based CNN feature extractor part. The HFE portion combines three feature extraction approaches into a single fused feature vector: Histogram-Oriented Gradient (HOG), Local Binary Pattern (LBP), and Speed Up Robust Feature (SURF). The CNN method also is used to extract additional features from test and training datasets. This two-feature vector is fused to design the classification model. This classifier performs the classification of dermoscopy images whether it is melanoma or non-melanoma skin cancer. The proposed methodology is performed on two ordinary datasets and achieved the accuracy 99.85%, sensitivity 91.65%, and specificity 95.70%, which makes it more successful than previous machine learning algorithms.

(1) Background: Trichosporon species have emerged as important opportunistic fungal pathogens, with Trichosporon asahii being the leading and most frequent cause of invasive disease. (2) Methods: We performed a global review focused on invasive trichosporonosis in neonates and pediatric patients with malignancies or hematologic disorders. We reviewed case reports and case series of trichosporonosis due to T. asahii published since 1994, year of the revised taxonomic classification. (3) Results: Twenty-four cases of invasive trichosporonosis were identified in neonates with presence of central venous catheter and use of broad-spectrum antibiotics recognized as main predisposing factors. Thirty-two cases were identified in children with malignancies or hematologic disorders, predominantly with severe neutropenia. Trichosporon asahii was isolated from blood in 24/32 (75%) pediatric cases. Cutaneous involvement was frequently observed in invasive trichosporonosis. Micafungin was the most commonly used prophylactic agent (9/22; 41%). Ten patients receiving prophylactic echinocandins were identified with breakthrough infections. Favorable outcome was reported in 12/16 (75%) pediatric patients receiving targeted monotherapy with voriconazole or combined with liposomal amphotericin B. Overall mortality in neonates and children with malignancy was 67% and 60%, respectively. (4) Conclusions: Voriconazole is advocated for the treatment of invasive trichosporonosis given the intrinsic resistance to echinocandins and poor susceptibility to polyenes.

Laminate structures composed of stiff plates and thin soft interlayers are widely used in aerospace, automotive and civil engineering encouraging the development of reliable non-destructive strategies for their condition assessment. In the paper, elastodynamic behaviour of such laminate structures is investigated with emphasis on its application in ultrasonic based NDT and SHM for the identification of interlayer mechanical and interfacial contact properties. A particular attention is given to the practically important frequency range, in which the wavelength considerably exceeds the thickness of the film. Three layer model with spring-type boundary conditions employed for imperfect contact simulation is used for numerical investigation. Novel effective boundary conditions are derived via asymptotic expansion technique and used for analysis of the peculiar properties of elastic guided waves in considered laminates. It is revealed that the thin and soft film influences the behaviour of the laminate mainly via the effective stiffnesses being a combination of the elastic moduli of the film, its thickness and interface stiffnesses. To evaluate each of these parameters separately (or to figure out that the available experimental data are insufficient), a step-wise procedure employing the effective boundary conditions is proposed and tested versus the laser Doppler vibrometry data for Lamb waves in Aluminium/Polymer film/Alumunium structure. The possibility of using film-related thickness resonance frequencies to estimate the film properties and contact quality is also demonstrated. Additionally, the rich family of edge waves is also investigated, and the splitting of fundamental edge waves into pairs is revealed.

Clinicians are often very sceptical about applying automatic image processing approaches, especially deep learning based methods, in practice. One main reason for this is the black-box nature of these approaches and the inherent problem of missing insights of the automatically derived decisions. In order to increase trust in these methods, this paper presents approaches that help to interpret and explain the results of deep learning algorithms by depicting the anatomical areas which influence the decision of the algorithm most. Moreover, this research presents a unified framework, TorchEsegeta, for applying various interpretability and explainability techniques for deep learning models and generate visual interpretations and explanations for clinicians to corroborate their clinical findings. In addition, this will aid in gaining confidence in such methods. The framework builds on existing interpretability and explainability techniques that are currently focusing on classification models, extending them to segmentation tasks. In addition, these methods have been adapted to 3D models for volumetric analysis. The proposed framework provides methods to quantitatively compare visual explanations using infidelity and sensitivity metrics. This framework can be used by data scientists to perform post-hoc interpretations and explanations of their models, develop more explainable tools and present the findings to clinicians to increase their faith in such models. The proposed framework was evaluated based on a use case scenario of vessel segmentation models trained on Time-of-fight (TOF) Magnetic Resonance Angiogram (MRA) images of the human brain. Quantitative and qualitative results of a comparative study of different models and interpretability methods are presented. Furthermore, this paper provides an extensive overview of several existing interpretability and explainability methods.

There is an urgent need to better understand the mechanisms involved in scar formation in brain. It is well known that astrocytes are critically engaged in this process. Here we analyze in-cipient scar formation one week after a discrete ischemic insult to the cerebral cortex. We show that the infarct border zone is characterized by pronounced changes in the organization and subcellular localization of the major astrocytic protein AQP4. Specifically there is a loss of AQP4 from astrocytic endfoot membranes that anchor astrocytes to pericapillary basal laminae and a disassembly of the supramolecular AQP4 complexes that normally abound in these membranes. This disassembly may be mechanistically coupled to a downregulation of the newly discovered AQP4 isoform AQP4ex. AQP4 has adhesive properties and is assumed to facilitate astrocyte mo-bility by permitting rapid volume changes at the leading edges of migrating astrocytes. Thus, the present findings provide new insight in the molecular basis of incipient scar formation.

A harmful impact of climate change and global warming has concerned various sectors of the international community. Numerous energy policies aiming at climate change mitigation have been implemented on a national and global scale. Renewable Energy Technologies (RET) play a critical role in enhancing sustainable solutions that significantly limit greenhouse gases (GHG) emissions. Such innovative technologies can facilitate energy transition through providing e.g. energy security, sustainable development, or effective usage of indigenous resources. However, the commercialization of RET becomes extremely challenging. The barriers can be of a different nature, although in this study the focus has been put on socio-economic and regulatory issues. In fact, there is ample evidence that energy policies play a central role in supporting renewables adoption. It is also claimed that RET require the whole ecosystem to support their successful diffusion. In this study, we explore multifarious barriers for a widespread RET diffusion in two European Union countries: Finland and Poland, indicating the most common barriers existing in the literature as well as analyzing major bottlenecks in the viewpoint of renewable energy companies’ executives. We also present statistics of the most commonly used RET in these countries in order to express the diffusion issues more appropriately. The outcomes of this study provide useful insight for the researchers in the energy transition field as well as practical managerial and regulatory implications aimed at overcoming these challenges.

Fatty acids (FFAs) are important biological molecules that serve as a major energy source and are key components of biological membranes. Besides, FFAs play important roles in metabolic regulation and contribute to the development and progression of metabolic disorders like diabetes. Recent studies have shown that FFAs can act as important ligands of G-protein coupled receptors (GPCRs) on the surface of cells and impact key physiological processes. Free fatty acid activated receptors include FFAR1 (GPR40), FFAR2 (GPR43), FFAR3 (GPR41) and FFAR4 (GPR120). FFAR2 and FFAR3are activated by short chain fatty acids like acetate, propionate and butyrate whereas FFAR1 and FFAR4 are activated by medium and long chain fatty acids like palmitate, oleate, linoleate and others. FFARs have generated considerable attention over the last few years and have become attractive pharmacological targets in the treatment of type 2 diabetes and metabolic syndrome. Several lines of evidence point to their importance in the regulation of whole-body metabolic homeostasis including adipose metabolism. Here we summarize our current understanding of the physiological functions of FFAR isoforms in adipose biology and explore the prospect of FFAR based therapies to treat patients with obesity and Type 2 Diabetes.

The Romani are the main European ethnic minority. The Romani people’s situation of social vulnerability and their difficulties in accessing the health system, make their health indicators worse than those of the non-Romani population. The present study will delve into the health beliefs and experiences with health services and their professionals through the perspectives of Romani women. In this qualitative study, 16 women of different ages were interviewed in a city located in the South of Spain. Four themes emerged from the analysis of data: the construction of the identity of Romani women, difficulties in life, health and disease beliefs and barriers in the access to the health system. We conclude that every project for the improvement of the health of the Romani community must take into account the active participation of Romani women and must consider the principles of Cultural Safety, by delving into the intercultural training of health professionals and addressing the social determinants of health which affect the Romani collective.

Research Highlights: This study identified the cell cycle genes in birch that likely play important roles during plant growth and development. This analysis provides a basis for understanding the regulatory mechanism of various cell cycles in Betula pendula. Background and Objectives: The cell cycle factors not only influence cell cycle progression together, but also regulate accretion, division and differentiation of cells, and then regulate growth and development of plant. In this study, we identified the putative cell cycle genes in B. pendula genome, based on the annotated cell cycle genes in A. thaliana. It could serve as a foundation for further functional studies. Materials and Methods: The transcript abundance was determined for all the cell cycle genes in xylem, root, leaf and flower tissues using RNA-seq technology. Results: We identified 59 cell cycle gene models in the genome of B. pendula, 17 highly expression genes among them. These genes were BpCDKA.1, BpCDKB1.1, BpCDKB2.1, BpCKS1.2, BpCYCB1.1, BpCYCB1.2, BpCYCB2.1, BpCYCD3.1, BpCYCD3.5, BpDEL1, BpDpa2, BpE2Fa, BpE2Fb, BpKRP1, BpKRP2, BpRb1 and BpWEE1. Conclusions: We identified 17 core cell cycle genes in the genome of birch by combining phylogenetic analysis and tissue specific expression data.

Over the centuries, honey is known for its superior usage in culinary, and for its rich nutrition and therapeutic values which are scientifically proven in the medical field. The chemical composition of honey varies depending on its botanical sources and environment. Therefore, the nutrition content in honey is highly likely to be affected by contaminants, such as heavy metals and pesticides. To ensure the quality of honey, parameters such as the heavy metal content should be within the safe range of total standard mineral and trace elements as defined by the International Food Standard (Codex Alimentarius), and pesticides should not be present at all. The high concentration of heavy metal and pesticides not only deteriorates the quality and quantity of honey, but also causes harm to the bee colony itself. In the agriculture sector, the excessive usage of pesticides and fertilizer negatively impacts the overall honey production process. Bees, a pollinating agent, bring the polluted nectar back to their beehives, eventually contaminating the honey and depreciating its value. Hence, this article will comprehensively review the activities that contribute to heavy metal and pesticide contamination, the interactions of bees as a pollinating agent, the impact of the pollutant to the colonies, and subsequently to the honey production.

Various efforts have been made to detect minimum value of glucose in any medium like water or body buffer solutions with high-sensitivity, accurate, and low-cost sensors in order to enhance life style. Therefore, the present study was done to investigate reliability of two-dimensional plasmonic structure by circular dichroism (CD) and ellipsometry tools in different concentrations of glucose. Our results confirmed a dependency of the CD signal on glucose concentrations and also a very good sensitivity based on the phase difference between each polarization in ellipsometry parameters with the help of an achiral plasmonic structure.

Chronic heart failure (CHF) results when heart cannot constantly supply the body tissues with oxygen and required nutrients, and it can be categorized as heart failure (HF) with preserved ejection fraction (HFpEF), and HF with reduced ejection fraction (HFrEF). There are different causes and mechanisms of the HF pathogenesis; however, the inflammation can be regarded as one of the factors promoting both HFrEF and HFpEF. Monocytes, a subgroup of leucocytes, are known as cellular mediators in response to cardiovascular injury and are closely related to inflammatory reactions. These cells are a vital component of the immune system and are the source of macrophages, which participate in cardiac tissue repair after injury. However, the monocytes are not homogenous as thought, and thus can present different functions under different cardiovascular disease conditions. In addition, there is still an open question whether the functions of monocytes and macrophages should be regarded as a cause or a consequence in CHF development. Therefore, our aim was to summarize the current studies on the function of various monocyte subsets in CHF with a focus on the role of a certain monocyte subset in HFpEF and HFrEF patients, and the relation to inflammatory markers.

Biocultural heritage preservation relies on ethnobotanical knowledge and the paleoethnobotanical data used in (re)constructing histories of human-biota interactions. Biocultural heritage, defined as the knowledge and practices of Indigenous and Local peoples and their biological relatives, is often guarded information, meant for specific audiences and withheld from other social circles. As such, these forms of heritage and knowledge must also be included in the ongoing data sovereignty discussions and movement. In this paper we share the process and design decisions behind creating an online database for ethnobotanical knowledge and associated paleoethnobotanical data, using a content management system designed to foreground Indigenous and local perspectives. Our main purpose is to suggest the Mukurtu content management system, originally designed for physical items of cultural importance, be considered as a potential tool for digitizing and ethically circulating biocultural heritage, including paleoethnobotanical resources. With this database, we aim to create access to biocultural heritage and paleoethnobotanical considerations for a variety of audiences while also respecting the protected and sensitive natures of Indigenous and local knowledges.

Sweetness drives consumption of added sugars, so understanding how individuals differ is important for developing strategies to lower sugar intake. However, methods to assess hedonic response to sweetness vary, making results across studies difficult to integrate. We compared methods to measure optimal sucrose concentration in 21 healthy adults (1) using paired-comparison preference tracking vs. ratings of liking, (2) with participants in the laboratory vs. at home, and (3) using aqueous solutions vs. vanilla milk. Tests were replicated on separate days to assess test-retest reliability. Test-retest reliability was similar between laboratory and home testing, but tended to be better for vanilla milk and preference tracking. Optimal sucrose concentration was virtually identical between laboratory and home, slightly lower when estimated via preference tracking, and about 50% lower in vanilla milk. However, individual optimal sucrose concentration correlated strongly between Methods, test Locations, and Stimuli. More than 50% of the variability in optimal sucrose concentration could be attributed to consistent differences among individuals while much less variability was attributable to differences in Methods, test Locations or Stimuli. These results demonstrate convergent validity between measures of preference and liking, support testing at home to lower participant burden, and suggest that aqueous solutions can be useful proxies for some commonly consumed beverages for measuring individual differences.

Our study assessed the impact of using ovitraps with pyriproxyfen on mosquito populations and the feasibility of using human saliva samples to test for seroconversion to dengue virus (DENV). We used a quasi-experimental research design by forming the intervention (n=220) and the control (n=223) groups in neighboring Taguig City, Philippines, over four months. Socio-demographic data, entomological indices, and IgG antibodies against DENV were measured. Associations between the implementation of ovitraps dosed with pyriproxyfen and mosquito densities (percentage positive ovitraps and container indices) and DENV seroconversion were calculated post-intervention in Months 2, 3, and 4. Among participants recruited at baseline, 17 and 13 were seropositive for dengue (DENV) in the intervention and control groups, respectively. Both entomological indices were lower in the treated area than the control site at months two, three, and four post-interventions but not earlier. Dengue seroconversions rates did decrease in the treated population but not significantly so. In conclusion, the use of PPF-treated ovitraps impacted the mosquito population but not the seroconversion rates. Compliance to provide saliva samples and the ability to detect IgG antibodies within these samples were encouraging and suggested that further studies on a larger population and longer duration are warranted.

This work focuses on analyzing acoustic emission (AE) signals as a means to predict failure in structures. Two main approaches are considered: (i) long-range correlation analysis using both the Hurst (H) and the Detrended Fluctuation Analysis (DFA) exponents, and (ii) natural time domain (NT) analysis. These methodologies are applied to the data collected from two application examples: a glass fiber reinforced polymeric plate and a spaghetti bridge model, where both structures were subjected to increasing loads until collapse. A traditional (AE) signal analysis is also performed to reference the study of the other methods. Results indicate that the proposed methods yield a reliable indication of failure in the studied structures.

Total edentulism is the loss of all teeth for any cause by a multifactorial process that involves biological and patient-related factors. Studies on edentulism and risk factors in Mexico are limited, and the epidemiological surveillance data is scarce and controversial since official governmental reports are not statistically representative of the country. We estimate the distribution for edentulism according to sociodemographic and socioeconomic variables in adults from a low-income state in 2003 and its progress in Mexico. We analyzed data from the National Performance Evaluation Survey in Oaxaca, Mexico, and the annual reports of the Epidemiological Surveillance System of Oral Pathologies in 2009-2019 using X². Oaxacan patients older than 75 y.o (17.9%, p<0.05), those with lower schooling (11.2%), and diabetes (14.5%) presented the highest percentage of edentulism. We do not observe differences in edentulism between sex or residence (p>0.05). From 2009 to 2019, country data reports the lowest rate of edentulism in adults over 20 y.o (0.32%; 95% CI 0.18%-0.48%) and the most affected population over 79 y.o. (7.29%; 95% CI 5.2%-9.30%). As it is a cumulative phenomenon, it is necessary to establish better surveillance, prevention, and treatment programs to improve the oral health of older thus reducing edentulism.

In the present study, the corrosion resistance of amorphous coating and composite coatings in 3.5 wt.% NaCl, 0.5 M H₂SO₄ and 10 wt.% NaOH solution were studied. The composite coatings exhibit superior corrosion resistance. When the content of AT13 （Al₂O₃–13 wt.% TiO₂）was 15 wt.%, the composite coating has the lowest corrosion current density (1.75×10^-6 A cm^-2), which is 5.14×10^-5 A cm^-2 for Fe-based metallic glassy coating, and the highest corrosion potential (-411 mV), which is -580 mV for Fe-based metallic glassy coating. The breakdown potential of the passivation film in 3.5 wt.% NaCl solution was much higher than that of 316L.The long-time immersion corrosion tests carried out on different coatings showed that the corrosion protection effect of coating was enhanced with the increase of the amount of AT13 added.

White Spot Syndrome Virus (WSSV) has emerged as one of the most prevalent and lethal viruses globally, and infects both shrimps and crabs in the aquatic environment. This study aimed to investigate the occurrence of WSSV in different ghers of Bangladesh and the virulence of the circulating phylotypes. We collected 360 shrimp (Penaeus monodon) and 120 crab (Scylla sp.) samples from the South-East (Cox’s Bazar) and South-West (Satkhira) coastal regions of Bangladesh. The VP28 gene-specific PCR assays and sequencing revealed statistically significant (p < 0.05, Kruskal Wallis test) differences in the prevalence of WSSV in shrimps and crabs between the study areas (Cox’s Bazar and Satkhira), and over the study periods (2017-2019). The mean Log load of WSSV varied from 8.40 (Cox’s Bazar) to 10.48 (Satkhira) per gram of tissue. The mean values for salinity, dissolved oxygen, temperature and pH were 14.71±0.76 ppt, 3.7±0.1 ppm, 34.11±0.38˚C and 8.23±0.38, respectively in the WSSV-positive ghers. The VP28 gene-based phylogenetic analysis showed an amino-acid substitution (E→G) at 167th position in the isolates from Cox’s Bazar (referred to as phylotype BD2) compared to the globally circulating one (BD1). Shrimp PL artificially challenged with BD1 and BD2 phylotypes with filtrates of tissue containing 0.423 X 109 copies of WSSV per mL resulted a median LT50 value of 73 hrs and 75 hrs, respectively. The in-vivo trial showed higher mean Log WSSV copies (6.47±2.07 per mg tissue) in BD1 challenged shrimp PL compared to BD2 (4.75±0.35 per mg tissue). Crabs infected with BD1 and BD2 showed 100% mortality within 48 hrs and 62 hrs of challenge, respectively with mean Log WSSV copies of 12.06±0.48 and 9.95±0.37 per gram tissue, respectively. Moreover, shrimp antimicrobial peptides (AMPs) penaeidin and lysozyme expression was lower in BD1 challenged group compared to BD2 challenged shrimps. These results collectively demonstrated that relative virulence properties of WSSV based on mortality rate, viral load and expression of host immune genes in artificially infected shrimp PL could be affected by single aa substitution in VP28.

Within phototherapy, a grand challenge in clinical cancer treatments is to develop a simple, cost-effective, and biocompatible approach to treat this disease using ultra-low doses of light. Carbon-based materials (CBM), such as graphene oxide (GO), reduced GO (r-GO), graphene quantum dots (GQDs), and carbon dots (C-DOTs), are rapidly emerging as a new class of thera-peutic materials against cancer. This mini-review summarizes the progress in lasts years re-garding the applications of CBM in photodynamic (PDT) and photothermal (PTT) therapies for tumor destruction. The current understanding of the performance of modified CBM, hybrids and composites, is also addressed. This approach seeks to achieve an enhanced healing action by im-proving and modulating the properties of CBM to treat various types of cancer. Metal oxides, organic molecules, biopolymers, therapeutic drugs, among others, have been combined with CBM to treat cancer by PDT, PTT, or synergistic therapies.

Digital dentistry, including CAD/CAM dentistry, is perhaps the most disruptive innovation in dentistry to date. The rapid development of digital dentistry technologies over the past several decades has enabled clinicians to improve patient care by significantly reducing the time necessary for the restorative phase of treatment. Advancements in intra-oral scanning and computer-aided design and manufacturing (CAD/CAM), in conjunction with new dental CAD/CAM ceramic materials, have simplified patient care and made same-day dentistry a reality. This review aims to present the most recent advancements described in current literature as well as to document the successful implementation of digital dentistry into a predoctoral program. The overall process of CAD/CAM same-day dentistry and the accompanying advancements in software and materials were presented and discussed. Implementation of technology and personnel requirements were reviewed. CAD/CAM dentistry has been influential in shaping and improving dental practice and education, and this influence will only continue with time.

We apply a well known technique of theoretical physics, known as Geometric Algebra or Clifford algebra, to linear electrical circuits with non-sinusoidal voltages and currents. We rederive from the first principles the Geometric Algebra approach to the apparent power decomposition. The important new point consists in a choice of a natural convenient basis in the Clifford vector space which simplifies considerably the presentation. Thus we are able to derive a number of general results which are missing in the former papers. In particular, a natural correspondence with the Current Physical Components approach is shown.

Nowadays, information security is a challenge especially when transmitted or shared in public clouds. Many of researchers have been proposed technique which fails to provide data integrity, security, authentication and another issue related to sensitivity data. The most common techniques were used to protect data during transmission on public cloud are cryptography, steganography, and compression. The proposed scheme suggests an entirely new approach for data security on public cloud. Authors have suggested an entirely new approach that completely makes secret data invisible behind carrier object and it is not been detected with the image performance parameters like PSNR, MSE, entropy and others. The details of results are explain in result section of paper. Proposed technique have better outcome than any other existing technique as a security mechanism on a public cloud. Primary focus of suggested approach is to minimize integrity loss of public storage data due to unrestricted access rights by uses. To improve reusability of carrier even after data concealed is really a challenging task and achieved through suggested approach.

The COVID-19 pandemic caused significant training disruptions during the 2020-21 season due to lockdowns, quarantines, and strict adherence to pandemic protocols. The main purpose of this study was to determine how pandemic training restrictions affected training volume and performance in one collegiate swim team. Cumulative training volume data, across a 28-week season, were compared between a pandemic (2020-2021) versus non-pandemic (2019-2020) season. Swimmers were categorized into three groups (Sprinters, Mid-Distance, and Long-Distance) based on training group. Performance times in 25 swimmers who competed in Regional Championships, during both the non-pandemic and pandemic year, were compared via 1-way ANOVA. 26 male and 22 female swimmers commenced the 2020-21 (pandemic) season, with 23% of swimmers voluntarily opting out. Three COVID-19 cases were confirmed (2%) by the medical staff with no long-term effects. Significant reductions in average swim volume were verified in Sprinters (32,867±10,135 vs.14,800±7,995yards;p<0.001), Mid-Distance (26,457±10,692 vs.17,054±9.923yards;p<0.001), and Long-Distance (37,600±14,430 vs.22,254±14,418yards;p<0.001) swimmers (non-pandemic vs. pandemic season, respectively). In the Regional performance analyses, the Sprinters swam faster (n=8;-0.5±0.6secs), while Mid-Distance (n=10;0.17±2.1secs) and Long-Distance (n=7;6.0±4.9secs) swimmers swam slower (F=11.76;p=0.0003;r²=0.52). Thus, the pandemic caused significant reductions in swim training volume, with Sprinters performing better and Long-Distance swimmers performing worse at Regional Championships.

Objective: Our goal is to develop an online questionnaire to survey the prevalence of suicidal behavior. Methods: We developed a questionnaire with 51 variables and proceeded with validations. Validations were performed using face validity, content validity, and construct validity. Reliability was performed by test-rest. Results: The face validity was 1.0 and the content validity was 0.91. The exploratory factor analysis got KMO = 0.86 and extracted one principal factor. The confirmatory factor analysis demonstrates RMSEA= 0.000 and CFI=1.000. The test-retest had an intraclass correlated coefficient of 0.98. Conclusion: The adequate development questionnaire was validated, and we have an instrument to survey suicide behaviors in the pandemic time.

The formation of inclusion complexes between alkylsulfonate guests and a cationic pillar[5]arene receptor in water was investigated by NMR and ITC techniques. The results show the formation of host-guest complexes stabilized by electrostatic interactions and hydrophobics effects with binding constants of up to 107 M-1 for the guest with higher hydrophobic character. Structurally, the alkyl chain of the guest is included in the hydrophobic aromatic cavity of the macrocycle while the sulfonate groups are hold in the multicationic portal by ionic interactions.

Colours were ubiquitous in the medieval world, and castles were no exception. While in the eyes of most people their rich colour schemes manifested power and wealth, some could also read the more nuanced messages these colours conveyed. The main objective of this paper is to discuss the use and role of colour in the interiors of castles of medieval Bohemia and Poland. The picture is complemented by the analysis of colour decorations of defensive residences of the Teutonic Order, for which colour schemes of external facades can be addressed as well. The dis-cussion takes into account the varying state of preservation and draws from the available writ-ten accounts. To present the most complete picture possible, we discuss royal residences, for which unfortunately limited data is available, as well as better-preserved castles of dukes and knights. We discuss the identified iconographic programmes and their chivalric, heraldic, and hagiographic motifs. Also within the scope of our discussion are late forms of floral decorations, known as “green chambers”. The numerous examples presented in the paper prove that colour was an important tool of visual social communication in castle architecture: it complemented the symbolism, and sometimes carried an independent message.

There is an overarching need to find alternative treatment options for malaria and this quest is more pressing in current times due to the morbidity and mortality data arising from most endemic countries and partially owing to the fact that the SARS-Cov-2 pandemic has diverted much public health attention. Additionally, the therapeutic options available for malaria has been severely threatened with the emergence of resistance to almost all existing drugs by the human malaria parasite. The Artemisinin Combination Therapies (ACTs) which hitherto have been the mainstay for malaria have encountered resistance in South East Asia, a notorious ground zero for the emergence of antimalarial drug resistance. This review analyses few key druggable targets of the parasite and the potential to leverage strategic inhibitors to mitigate the scourge of malaria by providing a concise assessment of the essential proteins of the malaria parasite that could serve as targets. Furthermore, this work provides a summary of the advances made in malaria parasite biology and the potential to leverage such findings for antimalarial drug production.

Virtual reality (VR) can play a key role in automotive marketing research, lowering costs and shortening the time it takes to bring a new product to market. However, there are still few VR applications that support automotive customers' experiences during the early stages of product development. Through a systematic review of literature and patents, this study aims to identify the challenges and opportunities for the application of virtual reality in car clinics, and to categorize them into attributes. We searched through the knowledge databases of PatentScout, ScienceDirect, Springer, and IEEEXplore. We found 72 patents with a high concentration in a few inventors. The United States of America presented the greatest number of records and the most common applications related to the apparatus for automatically reading respondents' reactions in a virtual environment. In terms of articles, we found 19 research papers that discussed sixteen categories identified as challenges and opportunities for automotive marketing research: 1) cost, 2) location to customers, 3) flexibility in interactions, 4) model transportation, 5) depth perception, 6) haptic perception, 7) motion, 8) movement perception/ physical collision, 9) color and texture, 10) sound feedback, 11) product interaction/manipulation, 12) visual-spatial, 13) graphic quality, 14) intuitiveness, 15) cybersecurity and 16) cybersickness. We conclude that the automotive industry can employ virtual reality for marketing research, but relevant elements such as hardware and software definition, stimulus quality, and research objectives, among others, must be considered.

miRNAs have recently attracted investigators' interest as regulators of valvular diseases pathogenesis, diagnostic biomarkers, and therapeutical targets. Evidence from in-vivo and in-vitro studies demonstrated stimulatory or inhibitory roles in mitral valve prolapse development, aortic leaflet fusion, and calcification pathways, specifically osteoblastic differentiation and transcription factors modulation. Tissue expression assessment and comparison between physiological and pathological phenotypes of different disease entities, including mitral valve prolapse and mitral chordae tendineae rupture, emerged as the best strategies to address miRNAs over or under-representation and thus, their impact on pathogeneses. In this review, we discuss the fundamental intra- and intercellular signals regulated by miRNAs leading to defects in mitral and aortic valves, congenital heart diseases, and the possible therapeutic strategies targeting them. These miRNAs inhibitors comprise of antisense oligonucleotides and sponge vectors. The miRNA mimics, miRNA expression vectors, and small molecules are instead possible practical strategies to increase specific miRNA activity. Advantages and technical limitations of these new drugs, including instability and complex pharmacokinetics, are also presented. Novel delivery strategies, such as nanoparticles and liposomes, are described to improve knowledge on future personalized treatment directions.

In this paper we study solutions and drift homogenization for a class of viscous lake equations by using the method of semigroups of bounded operators. Suppose that the initial value i.e.,for some Hölder continuous function onwith smooth function value satisfying and Then the initial value problem (2) for viscous lake equations has a unique smooth local strong solution. Using this result we study the drift homogenization for three-dimensional stationary Stokes equation in the usual sense

The goal is to reduce poverty, the method used is a literature study to see the effect of using Financial Technology (Fintech) on financial inclusion, method to see the effect of financial inclusion on poverty. From the results of the tests, the use of Fintech can increase financial inclusion, thereby encouraging poverty alleviation. It can be seen that the Financial Inclusion variable has a significant and negative effect on the poverty variable. This shows that countries that have high levels of financial inclusion are generally estimated to have low poverty rates. Increasing a country's financial inclusion can reduce poverty.

Neocarya macrophylla (Sabine) Prance (Nm, Chrysobalanaceae) is used traditionally as food, for medicinal spiritual and industrial purposes. It is also used as soap, dye, glue, fodder, termite repellent, firewood and for structural materials. Few studies on the physicochemical, nutritional contents, phytochemical and pharmacological activities have validated the benefits of Nm to humanity as food, in cosmetics and pharmaceutical products. The major bioactive constituents identified in the plant so far are steroids and flavonoids (such as stigmasterol, quercetin, catechin and its related glycosides). Extracts of the plant have shown good antivenom, antimicrobial, analgesic, anti-inflammatory, antimycobacterial, anthelmintic and antioxidant activities. Acute toxicity studies conducted have confirmed the plant to be toxic. More studies on the plant are required in order to exploit other biological activities as claimed by traditional healers and also to isolate more bioactive compounds. In addition, the safety and tolerability assessment of Nm should be undertaken due to its widespread usage.

The evaporation of polymer solution droplet is an important in solution-based polymer film fabrications, such as inkjet print, spray coatings, and droplet casting etc. In this work, we investigated the effect of droplet size, solvent evaporation rate, and concentration on “coffee-ring” effect, crystal nucleation, polymorphism, and morphology of dried poly (vinylidene fluoride) (PVDF) solution droplets with atomic force microscopy (AFM) method. We found that the crystal structure, morphology and crystal distribution in the center and edge regions of dried PVDF droplets were different due to “coffee-ring” effect. The “coffee-ring” effect of dried PVDF droplets was mainly composited of accumulated crystals at the edge region of droplet, which was mainly made by crystallization of migrated chains. The interplay between migration of chains, crystallization and solidification of PVDF droplets significantly influenced the formation of “coffee-ring”. In addition, our results showed that the decrease of droplet size and controlling solvent evaporation rate were effective ways to improve the PVDF β-phase nucleation and decrease crystal size.

Background: HMGA2 encodes a small non histone chromatin-associated protein that has no intrinsic transcriptional activity, but can modulate transcription by altering the chromatin architecture. HMGA2 was found overexpressed in a variety of epithelial and mesenchymal tumors and promoted invasion and metastasis in most malignant epithelial tumors. A recent study showed that P53 inhibited CRC progression by targeting HMGA2. However, the mechanism by which HMGA2 affect angiogenesis in CRC has not been clarified. Methods: The expression of HMGA2 was analyzed by IHC, WB and bio infomatic analysis. Cbioportal and mexpress online tools were applied to explore the CNV and methylation of HMGA2 in CRC patients. Single cell data from GEO was used to examine the specific cell type that contribute to the high HMGA2 expression in CRC. Lentivirus was used to knock down HMGA2 in CRC cells and HUVECs was used to study angiogenesis. Results: In the current study, we first detected the expression pattern of HMGA2 in CRC patients and evaluated its clinical values and CNV amplification could possibly contribute to the up regulation of HMGA2 in CRC patients. By analyzing CRC single cell data we found that HMGA2 was specifically up regulated in the colorectal epithelial cells. Furthermore, knocking down of HMGA2 suppresses angiogenesis via dual regulation of VEGF-A and SEMA3A in CRC through inactivating VEGRR2 pathway in HUVECs. Conclusions: HMGA2 might be a promising prognostic marker and target for treating advanced CRC patients.

Background: Intelligence quotient (IQ) is a measure of intellectual ability of performing, comprehension, and learning. Previous studies reported that intelligence measures predict various measures of job performance and income. Emotional awareness (EA) is the measure of emotional capacity to recognize and make sense of one’s emotions, as well as those of others. A high level of emotional awareness (EA) indicates one can learn from expressed emotions quickly. Both IQ and EA are important for personal and professional success.Objective: This study tests the hypothesis that the average national income rank is best predicted by the combined effect of the population's average intelligence quotient (one's ability to perform and learn) and emotional awareness (ability to recognize and make sense of emotions).Method: The population’s average intelligence quotient (IQ), emotional awareness (EA), and indices of good governance, which include corruption perception index and educational expenses for each country, were obtained from public data sources. The outcome variable was per capita gross national income. All the variables that are statistically significant in univariate analysis were included in the multivariate regression analyses but excluded from the final model if not statistically significant.Result: The total number of countries included in the final analysis was 81 because of missing values in different variables. Intelligence quotient (IQ) and emotional awareness (EA) were found to be highly correlated, at 0.77 and 0.32 respectively, with the per capita gross national income. The independent effects of intelligence quotient (IQ) and emotional awareness (EA) were found significant in the multivariate model after adjusting for measures of good governance. The R square value for the final multivariate model was 0.82. The corruption perception index (CPI) and educational expenses were strongly correlated with other measures of good governance such as democracy index, functioning of government, electoral process and pluralism, political participation, and civil liberty, but these variables were found not significant in the multivariate model. Conclusion: The study concludes the effect of intelligence quotient (IQ) and emotional awareness (EA) are complementary to each other but intelligence quotient (IQ) is a stronger predictor than emotional awareness (EA) for gross national income or wealth. We also find that indicators of good governance, including corruption perception index and educational expenses, have important associations with per capita gross national income. This study implies a nation may build more wealth if the educational system focuses on developing emotional awareness in addition to intelligence. The study concludes the effect of intelligence quotient (IQ) and emotional awareness (EA) are complementary to each other but intelligence quotient (IQ) is a stronger predictor than emotional awareness (EA) for gross national income or wealth. We also find that indicators of good governance, including corruption perception index and educational expenses, have important associations with per capita gross national income. This study implies a nation may build more wealth if the educational system focuses on developing emotional awareness in addition to intelligence.

For the majority of the contractual arrangements used in construction projects, the owner is not responsible for the cost deviations due to the variability of labor productivity or material price, amongst many other aspects. Consequently, the cost performance of a project may be entirely distinct for the owner and the contractor. Since the majority of the quantitative research on cost estimation and deviation found in the literature adopts the owners’ perspective, this research provides a contribution towards modelling costs and cost deviation from a contractors’ perspective. From an initial sample of 13 residential building and 10 office building projects, it was possible to develop models for cost estimation at the early stage of development including both endogenous and exogenous variables. Although the sample is relatively small, the authors were able to fully analyze all the cost data, using no secondary sources of data (very frequent in cost modelling studies). The statistically significant variables in the cost estimation models were the areas above and below ground and the years following the 2008 financial crisis, including the international bailout (2011-2014) period. For estimating the unit cost, a nonlinear model was obtained with the number of underground and total floor, the floor ratio and the years following the 2008 financial crisis, including the international bailout (2011-2014) period as predictors. For the office buildings, it was also found a statistically significant correlation between the cost deviation and the number of underground floors.

Epigenetic mechanisms, including post-translational modifications of DNA and histones that influence chromatin structure, regulate gene expression during normal development, and are also involved in carcinogenesis and cancer progression. The histone methyltransferase G9a (euchromatic histone lysine methyltransferase 2, EHMT2), which mostly mediates mono- and dimethylation by histone H3 lysine 9 (H3K9), influences gene expression involved in embryonic development and tissue differentiation. Overexpression of G9a has been observed in several cancer types, and different classes of G9a inhibitors have been developed as potential anticancer agents. Here, we review the emerging evidence suggesting the involvement of changes in G9a activity in brain tumors, namely glioblastoma (GBM), the main type of primary malignant brain cancer in adults, and medulloblastoma (MB), the most common type of malignant brain cancer in children. We also discuss the role of G9a in neuroblastoma (NB) and the drug development of G9a inhibitors.

Pulmonary fibrosis causes scar tissue formation that disrupts the functioning of the lungs. Uncaria gambir (Hunter) Roxb (hereafter gambir)—a plant native to West Sumatra in Indonesia—contains flavonoid (+)-catechin and has strong antioxidant activity, and it can be used to combat pulmonary fibrosis. This random in vivo experimental study analyzed the antifibrotic effect of gambir on the lungs of rats with bleomycin-induced fibrosis. The subjects were 10 groups of 10-week-old male rats weighing around 200–250 g. All groups were terminated at the end of the seventh week or on day 50. The lungs were cleaned, and tissues were taken to analyze inflammatory cell counts and TGF-β1 levels using bronchoalveolar lavage (BAL) with ELISA; type I collagen and tissue inhibitor of metalloproteinase 1 (TIMP-1) levels using immunohistochemistry (IHC); and activation of NF-κB using ELISA and Western blot assays. The most severe histopathological characteristic based on the modified Ashcroft score was in the bleomycin group (BG), whereas the mildest was in the 262 mg/kg of bodyweight antifibrotic gambir-dosed group (AF G262). The results showed a significant difference in the BAL inflammatory cell count (p = 0.017; p &lt; 0.05). AF G262 differed most from the other antifibrotic groups in terms of the number of inflammatory cells (0.63), TGF-β1 levels (3.80), and NF-κB levels (0.48), followed by the 131 mg/kg of bodyweight antifibrotic gambir-dosed group (AF G131), which also differed most from other antifibrotic groups in terms of NF-κB (0.48), TIMP-1 (11.74), and collagen I (14.50) levels. Western blot analysis showed that the fibropreventive and antifibrotic groups had a specific band size of p65, whereas no specific band binding existed in the control group. This study concluded that the administration of AF G262 could improve fibrosis by lysing the extracellular matrix (ECM) in rat lungs.

This paper seeks to optimize the mechanical and durability properties of ultra-high performance concrete (UHPC). To meet this objective, concrete specimens were manufactured by using 1,100 kg/m3 of binder, water/binder ratio 0.20, silica sand and last generation of superplasticizer. Silica fume, metakaolin and two types of nano silica were used for improving the performances of the concrete. Additional mixtures included 13mm long OL steel fibers. Compressive strength, electrical resistivity, mercury intrusion porosimetry tests and differential and thermogravimetric thermal analysis were carried out. The binary combination of nano silica and metakaolin, and the ternary combination of nano silica with metakaolin and silica fume, led to the best performances of the UHPC, both mechanical and durable performances.

Abstract: Calcium-based catalysts are of a high interest for glycerol polymerization due to their high catalytic activity and large availability. However, their poor stability under reaction conditions is an issue. In the present study, we investigated the stability and catalytic activity of Ca-hydroxyapatites (HAps) as one of the most abundant Ca-source in nature. A stochiometric, a Ca-deficient and a Ca-rich HAps have been synthetized and tested as catalysts in the glycerol polymerization reaction. Deficient and stochiometric HAps exhibited a remarkable 100% selectivity to triglycerol at 15 % of glycerol conversion at 245 °C after 8 h of reaction in the presence 0.5 mol.% of catalyst. Moreover, under the same reaction conditions, Ca-rich HAp showed a high selectivity (88 %) to di- and triglycerol at a glycerol conversion of 27 %. Most importantly, these catalysts were unexpectedly stable towards leaching under the reaction conditions based on the ICP-OES results. However, based on the catalytic tests and characterization analysis performed by XRD, XPS, IR, TGA-DSC and ICP-OES, we found that HAps can be deactivated by the presence of the reaction products themselves, i.e., water and polymers.

For personalized recommender systems,matrix factorization and its variants have become mainstream in collaborative filtering.However,the dot product in matrix factorization does not satisfy the triangle inequality and therefore fails to capture fine-grained information. Metric learning-based models have been shown to be better at capturing fine-grained information than matrix factorization. Nevertheless,most of these models only focus on rating data and social information, which are not sufficient for dealing with the challenges of data sparsity. In this paper,we propose a metric learning-based social recommendation model called SRMC.SRMC exploits users' co-occurrence pattern to discover their potentially similar or dissimilar users with symmetric relationships and change their relative positions to achieve better recommendations.Experiments on three public datasets show that our model is more effective than the compared models.

This review article seeks to provide relevant information about the applicability of cell-based assays in assessing cytotoxicity of phytochemicals in light of several traditional methods available. Phenolic compounds and other phytochemicals are significant resources for drug discovery and development, thus underlining the enormous potentials of plant-derived natural products for the prevention and management of oxidative stress associated with cancer and other diseases. These effects have been linked to the content of phytochemicals such as phenolic compounds and their antioxidant properties. The abundance and complexity of these bio-constituents highlight the need for well-defined methods for the in vitro characterization and quantification of extracts and/or preparations that can translate to in vivo effects. Cell culture systems provide a useful model for basic research and a wide range of clinical in vitro studies and physiological processes as well as assessing the toxicity and therapeutic potential of compounds including plant extracts with potential medicinal benefits. Their use in cancer research provide a useful insight into possible therapeutic properties of phytochemicals at the cellular level. This approach has been instrumental in the initial stages of developing chemotherapeutic agents where human cancer cell lines are used as experimental models. These models have continued to contribute to elucidating specific requirements for certain biochemical events associated with proliferation, metabolism, loss of cell viability/apoptosis. Cell culture systems remain a promising tool in natural product development.

Three-Dimensional mesoporous TiO2 scaffolds of anatase phase possess inherent eximious optical behavior that are beneficial in designing photoelectrodes for solar energy conversion applications. However, substantial efforts have been devoted in maximizing the UV and/or visible light absorption efficiency, and suppressing the annihilation of photogenerated charged species in pristine mesoporous TiO2 structure for improved solar illumination conversion efficiencies. This study provides the fundamental insights into Mxene functionalized mesoporous TiO2 as photoelectrode for the first time. This novel combination of Mxene functionalized TiO2 electrodes with and without TiCl4 treatments have been successfully optimized to intensify the process of photon absorption, charge segregation and photocurrent, resulting in superior photoelectrode performance. The photocurrent measurements of prepared photoelectrodes are significantly enhanced upon increased contents of Mxene due to improved absorption efficiency within the visible region as verified by UV–Vis absorption spectroscopy. Moreover, as evident through structural analysis, the anatase phase of TiO2 is well grown due to increased contents of Mxene and post-deposition heat treatments. Consequently, an appreciable coverage of well-developed grains on FTO surface observed in SEM images. Thereby, the newly fabricated conductive mesoporous TiO2 photoelectrodes are potential candidates for photoinduced energy conversion and storage purposes.

The aim of this study as to determine the relationship between the factors of demography, comor-bidity, medication, lifestyle, and access to health services related to the QoL of people with hy-pertension and its complications in Sleman Regency, Yogyakarta. The study was conducted in a cross-sectional manner using data from Sleman HDSS (Health and Demographic Surveillance System) from 2015 to 2018 in cycles 3 and 2 with the inclusion criteria of hypertensive patients and their complications aged 25 years or older obtained by using a total sampling of 532 people. Measurement of QoL using Short Form 12v2 2a and 2b questionnaires presented in the Physical Component Summary (PCS) and Mental Component Summary (MCS). Data analysis using Mann-Whitney test and Kruskal Wallis test. The results showed factors related to the QoL in PCS were variables of gender, age, diagnosis of hypertension and its complications, the presence of comorbidities, fatty foods, drug consumption in the last two weeks, while factors related to the mental component (MCS) were education and occupation seen from the p-value <0.05. QoL with hypertension and its complications influence and decrease the physical than the patient's mental condition.

Zero-rate output (ZRO) drift induces deteriorated micro-electromechanical system (MEMS) gy-roscope performances, severely limiting its practical applications. Hence, it is vital to explore an effective method toward ZRO drift reduction. In this work, we conduct an elaborate investigation on the impacts of the internal and packaging stresses on the ZRO drift at the thermal start-up stage, and propose a temperature-induced stress release method to reduce the duration and magnitude of ZRO drift. Self-developed high-Q dual mass tuning fork gyroscopes (TFGs) are adopted to study the correlations between temperature, frequency and ZRO drift. Furthermore, a rigorous finite element simulation model is built based on the actual device and packaging structure, revealing the temperature and stresses distribution inside TFGs. Meanwhile, the relationship between temperature and stresses are deeply explored. Moreover, we introduce a temperature-induced stress release process to generate thermal stresses and reduce the temperature-related device sensitivity. By this way, the ZRO drift duration is drastically reduced from ~2000 s to ~890 s, and the drift magnitude decreases from ~0.4 °/s to ~0.23 °/s. This stress release method achieves a small bias instability (BI) of 7.903 °/h and a low angle random walk (ARW) of 0.792 °/√h, and the long-term bias performance is significantly improved.

There has been a steady rise in the recognition of menstrual hygiene management (MHM) as a pressing public health issue due to several advocacy campaigns against its high cost. However, not much of such recognition has been given to it outside the non-profit sector in Nigeria. This is paradoxical considering that most menstruators in Nigeria cannot afford MHM whose cost is considered high even in developed countries. We estimated that the average lifetime cost of MHM in Nigeria is US$1,122.3 per menstruator and US$113.58 billion for the entire menstruating population. Although this cost is relatively lower than in other countries, Nigeria’s low-income level explains why there is a high prevalence of period poverty among menstruators in Nigeria. This commentary highlights the intersected impacts of the cost of MHM and period poverty on the average Nigerian menstruator, his/her family, the economy, the environment and the United Nations Sustainable Development Goals. To alleviate the discussed negative effects, we suggested, as a key recommendation, the national shift from the use of disposable MHM products to that of reusable ones.

Abstract: The most common genetic cause of amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) is the presence of poly-PR/GR dipeptide repeats which are encoded by the C9orf72 gene. Recently, it was shown that poly-PR/GR alters chromatin accessibility which results in stabilization and enhancement of transcriptional activity of the tumor suppressor p53 in several neurodegenerative disease models. Reduction of p53 protein levels in cell and model organisms protects against neurotoxicity of poly-PR, and partially protects against neurotoxicity of poly-GR. Here, we aimed to study the detailed molecular mechanisms how p53 contributes to poly-PR/GR mediated neurodegeneration. Using a combination of biophysical techniques such as nuclear magnetic resonance (NMR) spectroscopy, fluorescence polarization, turbidity assays and differential interference contrast (DIC) microscopy, we found that p53 physically interacts with poly-PR/GR and triggers liquid-liquid phase separation of p53. We identified p53 transactivation domain 2 (TAD2) as the main binding site for PR25/GR25 and show that binding of poly-PR/GR to p53 is mediated by a network of electrostatic and/or hydrophobic interactions. Our findings might help to understand the mechanistic role of p53 in poly-PR/GR - associated neurodegeneration.

Since its advent in the mid-twentieth century, the field of artificial intelligence (AI) has been heavily influenced by biology. From the structure of the brain to evolution by natural selection, core biological concepts underpin many of the fundamental breakthroughs in modern AI. Here, focusing specifically on artificial neural networks (ANNs) that have become commonplace in machine learning, we show the numerous connections between theories based on coevolution, multi-level selection, modularity and competition and related developments in ANNs. Our aim is to illuminate the valuable but often overlooked inspiration biologists have provided AI research and to spark future contributions at this intersection of biology and computer science. Although recent advances in AI have been swift, many significant challenges remain requiring innovative solutions. Thankfully, biology in all its forms still has a lot to teach us, especially when trying to create truly intelligent machines.

Facing unprecedented global declines in the extent and integrity of ecosystems, the 15^th UN Biodiversity Conference (COP-15) in Kunming, China, presents an opportunity for transformative change. However, a lack of consensus on two key issues – resource mobilization and Access and Benefit Sharing (ABS) associated with Digital Sequence Information (DSI) – risks stalling negotiations for an ambitious ‘Post-2020 Global Biodiversity Framework’ as the next 10-year strategic plan under the Convention on Biological Diversity. We highlight systemic misconceptions concerning the financing of biodiversity and the burden this places on the ABS system. In the context of DSI, we caution that conflating ABS with resource mobilization risks disrupting modern science policy built on open access, with potentially severe ramifications for scientific research and innovation. To resolve these tensions, we call for a recalibration of discussions on ABS in order to maximize the value delivered by biodiversity for all of society, including indigenous peoples and local communities.

The research is based on the question: Can teaching/learning methodologies help to achieve the objective of Sumak Kawsay in Ecuador? a STEAM work approach was applied in technical high school students and higher education students (technological), in order to determine the level of impact in terms of project generation, following the entire process, from the generation of ideas to the linking of projects with society, The analysis was carried out in students from 15 to 22 years old in two institutions in the city of Cuenca, using the method of intentional sampling and the systematic review of scientific articles in the Scopus and Google academic databases of the last 3 years, to determine the level of impact of the prototypes pub-lished in indexed journals. The most striking aspect of the results is that of the 260 students surveyed, only 19.6% of students consider that there are STEAM teachers in the classroom, and only 56.92% of students manage to link their work with society, one of the recommended strategies being the publication of scientific articles and participation in congresses disseminating the high impact work done by students in the classroom.

We investigated the role of the human medio-temporal complex (hMT+) in the memory encoding and storage of a sequence of four coherently moving RDKs by applying repetitive transcranial magnetic stimulation (rTMS) during an early or late phase of the retention interval. Moreover, in a second experiment we also tested whether disrupting the functional integrity of hMT+ during the early phase impaired the precision of the encoded motion directions. Overall, results showed that both recognition accuracy and precision were worse in middle serial positions, suggesting the occurrence of primacy and recency effects. We found that rTMS delivered during the early (but not the late) phase of the retention interval was able to impair not only recognition of RDKs, but also the precision of the retained motion direction. However, such impairment occurred only for RDKs presented in middle positions along the presented sequence, where performance was already closer to chance level. Altogether these findings suggest an involvement of hMT+ in the memory encoding of visual motion direction. Given that both position sequence and rTMS modulated not only recognition but also precision of the stored information, these findings are in support of a model of visual short-term memory with a variable resolution of each stored item, consistent with the assigned amount of memory resources, and that such item-specific memory resolution is supported by the functional integrity of area hMT+.

Cyanobacteria are microorganisms able to adapt to a wide variety of environmental conditions and abiotic stresses. They produce a very large number of metabolites that can participate in the adaptation of cyanobacteria to a large range of resources such as light, temperature, or nutrient. The metabolites variation is one way to understand the physiological status and adaptation of cells. In this study, we aim to understand how the diversity and the dynamics of the whole metabolome is dependent of the growth phases and under control of abiotic factors (e.g. light intensity and temperature). The cyanobacteria Aliinostoc sp. PMC 882.14 was selected for its large number of biosynthetic gene clusters. Metabolomes were analyzed by using mass spectrometry (qTOF-MS/MS) combined with untargeted analysis to investigate the metabolite dynamics. Significant variations were characterized between exponential and stationary phases, whatever the culture conditions (“control”, “higher light”, or “higher temperature”). ”Higher light” and “higher temperature” favored the synthesis of metabolites belonging to the same molecular families. Among highly regulated metabolites, we observe the presence of mycosporine-like amino acids (MAAs), and various variants of somamides, microginins, and microviridins. Through Aliinostoc sp. PMC 882.14, this study shows the importance of knowing the physiological state of cyanobacteria for comparative global metabolomics and questions the regulation processes involve into metabolite families production. Our results also open up new perspectives in the context of the production of targeted bioactive metabolites.

It is shown how the secondary structure of proteins, musical forms and verses of poems are approximately ruled by universal laws relying on graph coverings. In this direction, one explores the group structure of a variant of the SARS-Cov-2 spike protein and the group structure of apolipoprotein-H, passing from the primary code with amino acids to the secondary structures organizing the foldings. Then one look at the musical forms employed in the classical and contemporary periods. Finally, one investigates in much detail the group structure of a small poem in prose by Charles Baudelaire and that of the Bateau Ivre by Arthur Rimbaud.

This paper consists of two parts. In part I some new relations for a field theory with time intervals are derived. One concept of field theory evaluated is complementarity, another is field operators both defined within a time interval description. Part II includes specific results and commentary. Discussed are time interval dependent wave propagation surfaces for star source emission waves and derived is a metric propagation surface area requirement. The results allow to consider one same field that like gravitation within General Relativity applies to both non zero and zero mass. The associated field energy is space time dependent for non zero mass, and is related to a space time dependent metric tensor for zero mass wave particles. Defined is internal energy transfer where wave particle numbers increase linearly and mass and momentum diminish, decrease inversely with the distance from the wave emission source. The commentary are applications related to cosmological overall volume and temperature dependence.

Dengue is the most prevalent arthropod-borne disease globally and affects approximately 2.5 billion people living in over 100 countries. The increasing geographic expansion of Aedes aegypti mosquitoes which transmit the virus has made dengue fever a global health concern. There are currently no approved antivirals available to treat dengue, and the only approved vaccine used in some countries is limited to seropositive patients. Treatment of dengue therefore remains largely supportive to date; hence research efforts are being intensified for the development of antivirals against dengue. The NS3 and NS5 nonstructural proteins have been the major targets for dengue antiviral development due to their indispensable enzymatic and biological functions in the viral replication process. NS5 is the largest and most conserved nonstructural protein encoded by flaviviruses including dengue. Its multifunctionality makes it an attractive target for antiviral development against dengue, but research efforts are hindered due to its limited structural characterization compared to the NS5 of other flaviviruses like the Zika virus. Increase in structural insights into the dengue NS5 protein will accelerate drug discovery efforts focused on NS5 as an antiviral target. In this review, we will give an overview of the current state of therapeutic development against dengue.

An effective battery management system (BMS) is indispensable for any lithium-ion battery (LIB) powered systems such as electric vehicles (EVs) and stationary grid-tied energy storage systems. Massive wire harness, scalability issue, physical failure of wiring, and high implementation cost and weight are some of the major issues in conventional wired-BMS. One of the promising solutions researchers have come up with is the wireless BMS (WBMS) architecture. Despite research and development on WBMS got momentum more than a decade ago, it is still in a preliminary stage. Significant further upgradation is still required towards developing an industry-ready WBMS, especially for high-power LIB packs. Therefore, an in-depth survey exclusively on WBMS architectures is presented in this article. The aim is to provide a summary of the existing developments as well as to present an informative guide to the research community for future development by highlighting the issues, emerging trends, and challenges. In-depth analysis of the existing WBMS topologies will not only help the researchers to understand the existing challenges and future research scopes clearly while at the same time enthuse them to focus their research inclination in the domain of WBMS.

Methotrexate (MTX) is a potent drug for the treatment of various diseases globally amidst being a chemotherapeutic and immunosuppressant agent. However, hepatotoxicity induced by MTX could be life-threatening if left untreated. Folate supplementation is concurrently applied to reduce the adverse effects of MTX, albeit efficacy compromise. Therefore, there is the need to understand the process for the prevention and treatment strategies for MTX induced hepatotoxicity (MIH). In recent times, preliminary preclinical and clinical findings indicate the potential of natural phytobioactive compounds for MIH prevention and treatment. This mini review therefore summarizes proposed mechanisms of MIH and recent advances in the prevention and treatment prospects of natural phytobioactive compounds on MIH.

A position sensing glove, called SmartScan, that creates a 3D virtual model of a real object is presented. The data from the glove is processed by a volume minimization algorithm to validate the position sensor data. This allows only data from the object’s surface to be retained. The data validation algorithm allows the user to progressively improve an image by repeatedly moving their hand over the object. In addition, the user can choose their own balance between feature resolution and invalid data rejection. The SmartScan glove is tested on a foot model and is shown to be robust against motion artifacts, and has a mean accuracy of 2.9 mm (compared to a 3D model generated from optical imaging) without calibration.

Pancreatic ductal adenocarcinoma (PDAC) is a lethal cancer with a characteristic dysregulated metabolism. Abnormal clinicopathological features linked to defective metabolic and inflammatory response pathways can induce PDAC development and progression. In this study, we investigated the metabolites and lipoproteins profiles of PDAC patients of African ancestry. Nuclear Magnetic Resonance (NMR) spectroscopy was conducted on serum obtained from consenting individuals (34 PDAC, 6 Chronic Pancreatitis, and 6 healthy participants). Seventy-five signals were quantified from each NMR spectrum. The Liposcale test was used for lipoprotein characterization. Spearman’s correlation and Kapan Meier tests were conducted for correlation and survival analyses respectively. In our patient cohort, the results demonstrated that levels of metabolites involved in the glycolytic pathway increased with the tumour stage. Raised ethanol and 3-hydroxybutyrate were independently correlated with a shorter patient survival time, irrespective of tumour stage. Furthermore, increased levels of bilirubin resulted in an abnormal lipoprotein profile in PDAC patients. Additionally, we observed that the levels of a panel of metabolites (such as glucose, lactate) and lipoproteins correlated with those of inflammatory markers. Taken together, the metabolic phenotype can help distinguish PDAC severity and be used in predicting patient survival and in informing treatment intervention.

This paper reports applying Minimax principle and impulsive differential inequality to derive the existence of multiple stationary solutions and the global stability of a positive stationary solution for a delayed feedback Gilpin-Ayala competition model with impulsive disturbance. The conclusion obtained in this paper reduces the conservatism of the algorithm compared with the known literature, for the impulsive disturbance is not limited to impulsive control.

Functional osseoconductive coatings based on hydroxylapatite (HAp) and applied preferentially by atmospheric plasma spraying to medical implant surfaces are a mainstay of modern implantology. During contact with the hot plasma jet, HAp particles melt incongruently and undergo complex dehydration and decomposition reactions that alter their phase composition and crystallographic symmetry, and thus, the physical and biological properties of the coatings. Surface analytical methods such as laser-Raman and nuclear magnetic resonance (NMR) spectroscopies are useful tools to assess the structural changes of HAp imposed by heat treatment during their flight along the hot plasma jet. In this contribution, the controversial information on the existence or non-existence of oxyapatite, i.e. fully dehydrated HAp as a thermodynamically stable compound is highlighted.

Deep learning (DL), a branch of machine learning (ML) and artificial intelligence (AI) is nowadays considered as a core technology of today's Fourth Industrial Revolution (4IR or Industry 4.0). Due to its learning capabilities from data, DL technology originated from artificial neural network (ANN), has become a hot topic in the context of computing, and is widely applied in various application areas like healthcare, visual recognition, cybersecurity, and many more. However, building an appropriate DL model is a challenging task, due to the dynamic nature and variations in real-world problems and data. Moreover, the lack of core understanding turns DL methods into black-box machines that hamper development at the standard level. This article presents a structured and comprehensive view on DL techniques including a taxonomy considering various types of real-world tasks like supervised or unsupervised. In our taxonomy, we take into account deep networks for supervised or discriminative learning, unsupervised or generative learning as well as hybrid learning and relevant others. We also summarize real-world application areas where deep learning techniques can be used. Finally, we point out ten potential aspects for future generation DL modeling with research directions. Overall, this article aims to draw a big picture on DL modeling that can be used as a reference guide for both academia and industry professionals.

In humankind’s endeavor to explore beyond our planet and travel further into space, we are now at the threshold of an era in which it is possible to move to and from low Earth orbit (LEO) with increasing ease and reduced cost. Through the International Space Station (ISS) U.S. National Laboratory, investigators from industry, academia, and government can easily access the unique LEO environment on the ISS to conduct research and development (R&D) activities in ways not possible on Earth. A key advantage of the LEO environment for life sciences research is the ability to conduct experiments in sustained microgravity conditions. The ability to conduct long-term research in microgravity enables opportunities for novel, fundamental studies in tissue engineering and regenerative medicine, including research on stem cell proliferation and differentiation, biofabrication, and disease modeling using microphysiological systems (MPS) that build on prior research using simulated microgravity conditions (Grimm, D., et al. 2018). Over the last decade, space-based research has demonstrated that microgravity informs our knowledge of fundamental biology and accelerates advancements in health care and medical technologies (International Space Station 2019). The benefits provided by conducting biomedical research in LEO may lead to breakthroughs not achievable on Earth. We are now at a transition point, in which nations are changing their approach to space-based R&D. The focus is shifting from government-funded fundamental science toward the expansion of privately funded R&D with terrestrial application and economic value that will drive a robust marketplace for innovation and manufacturing in LEO. Making this long-term transition requires public-private participation and near-term funding to support critical R&D to leverage the benefits of the LEO environment and de-risk space-based research. Studies conducted on the ISS over the past several years have indicated that one area with potential significant economic value and benefit to life on Earth is space-based biomanufacturing, or the use of biological and nonbiological materials to produce commercially relevant biomolecules and biomaterials for use in preclinical, clinical, and therapeutic applications. We must take advantage of the remaining lifetime of the ISS as a valuable LEO platform to demonstrate this economic value and Earth benefit. By facilitating access to the space station, the ISS National Lab is uniquely positioned to enable the R&D necessary to bridge the gap between the initial discovery phase of space-based biomedical research and the development of a sustainable, investment-worthy biomanufacturing market in LEO supported by future commercial platforms. Through a joint effort, the Center for the Advancement of Science in Space (CASIS), which manages the ISS National Lab, and the University of Pittsburgh’s McGowan Institute for Regenerative Medicine brought together thought leaders from around the U.S. for a Biomanufacturing in Space Symposium that consisted of a series of working sessions to review data from past space-based tissue engineering and regenerative medicine research, discuss relevant current space-based R&D in this area, and consider potential future markets to address the questions: What are the most promising opportunities to leverage the ISS to advance space-based biomanufacturing moving forward? What are the current gaps or barriers that, if overcome, could clear pathways toward private investment in LEO as a valued site for research, development, and production activity? And, most importantly: For which opportunities do the most compelling value propositions exist? The goal of the Biomanufacturing in Space Symposium was to help identify the specific areas in which government and industry investment would be most likely to stimulate advancements that overcome barriers. This would lead to a more investment-ready landscape for private interests to enter the market and fuel exponential growth. The symposium was meant to serve as the first step in developing a roadmap to a sustainable market for biomanufacturing in space. The symposium identified and prioritized multiple key R&D opportunities to advance space-based biomanufacturing. These opportunities fall in the areas of disease modeling, stem cells and stem-cell-derived products, and biofabrication. Additionally, symposium participants highlighted the critical need for additional data to help validate and de-risk these opportunities and concluded that approaches such as automation, artificial intelligence (AI), and machine learning will be needed to produce and capture the required data. Symposium participants also came to a consensus that public-private partnerships and funding will be needed to advance the opportunities toward a biomanufacturing marketplace in LEO. This paper will summarize the current state of the science and technology on the ISS and in the fields of tissue engineering and regenerative medicine; provide an overview of biomanufacturing R&D in space to date; review the goals of the Biomanufacturing in Space Symposium; highlight the key commercial opportunities and gaps identified during the symposium; provide information on potential market sizes; and briefly discuss the next steps in developing a roadmap to biomanufacturing in space.

Choline kinase inhibitors are an important class of cytotoxic compounds useful for the treatment of different forms of cancer since aberrant choline metabolism is a feature of neoplastic cells. Here we present the characterization and the structure activity relationship of a series of non-symmetrical choline kinase inhibitors characterized by a 3-aminophenol moiety, bound to 4-(dimethylamino)- or 4-(pyrrolidin-1-yl)pyridinium cationic heads through several linkers. These derivatives were evaluated both for their inhibitory activity on the enzyme and for their antiproliferative activity in a panel of six human tumor cell lines. The compounds with the best inhibitory results were those connected to the linker by the N-atom (4a-h) and these results are supported by docking studies. The compounds with the best antiproliferative results were those connected to the linker by the O-atom (3a-h). On the other hand, as was predictable in both families, the inhibitory effect on the enzyme is greater the shorter the length of the linker, while in tumor cells, lipophilicity and choline uptake inhibition could play a decisive role. Interestingly compounds 3c and 4f, selected for both their ability to inhibit the enzyme and good antiproliferative activity, are endowed with a low toxicity in non-tumoral cells (e.g human peripheral lymphocytes) respect to cancer cells. These compounds were also able to induce to induce apoptosis in Jurkat leukemic cells without causing significative variations of cell cycle. It is worth to mention that these derivatives, beside their inhibitory effect on choline kinase, displayed a modest ability to inhibit choline uptake thus suggesting that this mechanism may also contribute to the observed cytotoxicity.

Background: In an age where information is generally accessible, most of the interest these days has focused on how accessible and convenient technology can be. So small and personal, mobile devices can transform our perception of learning by combining both mobility and convenience. Mobile learning is part of the digital learning landscape alongside e-learning and serious games. However, knowledge about effective design of mobile learning experiences remains of interest with a focus on appropriate design models and the embodiments that can be implemented to achieve the intended educational outcomes. Exploring the instructor's perspective on mobile learning is essential. Therefore, the aim of this study was to investigate the Moroccan instructors' perception and practice of mobile learning to inform the development of an ecologically valid mobile learning integration model. Methods: Higher education Instructors (n=41) were recruited to the study. The Moroccan instructors' perception and their experiences regarding their adoption of mobile learning were collected using an online survey. The analysis focused on their mobile use, perceived IT competency, and opinions on mobile learning. Results: We described most of the instructors' considerations regarding integrating mobile technologies into their teaching activities. We found that most of the mobile learning activities defined by the respondents corresponded to relatively advanced use of mobile devices. More promising, instructors have found innovative ways to use the educational potential of mobile devices. However, the prospect of mobile devices was still to challenge. No or poor Wi-Fi connection, number of devices or limited access, sometimes fees or applications incompatibility were identified as reasons and obstacles to mobile learning usage. Conclusion: Mobile learning is mostly perceived positively among Moroccan instructors allowing many applications and usage to enhance teaching and learning. In this study, a better understanding of aspects and factors influencing the integration of mobile learning in the Moroccan educational context is exposed, helping further the development of an ecologically valid mobile learning integration model. Future work on mobile learning should consider the highly paced evolution of mobile technologies, emphasizing the flexibility of integration frameworks to support instructors and learners.

Background: Serious games are conceptualized as a broad topic and overlap segments of more modern forms of education: e-learning, edutainment, game-based learning, and digital game-based learning. Serious Games aligns with digitalization and the modern era and creates novel opportunities for learning and assessment in medical education. Escape rooms, a type of serious games, merge mental and physical aspects to reinforce critical skills useful in daily life. It challenges logic and reasoning and demands careful analysis of situations to correlate and solve different stages of the escape room under pressurized, timed conditions. Furthermore, it serves as an adequate environment to build problem-solving skills, communication skills, and leadership skills through the collaboration of people to achieve a common goal. The aim of this study was to investigate the applications of escape rooms in Medical Education. Method: This study investigated the applications of escape rooms in medical education. Serious games are expanding in education and have attained great relevance due to their intriguing and intrinsically motivating attributes. Within serious games, we focused on escape rooms in which participants are locked in a room, faced with puzzles that must be solved to ‘escape the room’. Compiling the data from the first 100 hits of medical application of escape rooms, we found 72 cases and categorized them by year, specialty, participants structure, simulation experience, and design. Results: We reported on escape rooms in medical education by the year in which they were reported, the medical specialty, the participant structure, grouped or individual, the experience design; real, hybrid, or digital, and the modality of the delivery. 72% of the escape rooms focused on four main areas: nursing education (25.0%), emergency medicine (22.2%), pharmacy (12.5%), and interprofessional education (12.5%). Most of the escape rooms had a group-based physical design and little attention was given to provide a detailed description of the design considerations, such as the pathway type (linear, semi-linear, open). Conclusion: Escape rooms are applied in a wide range of medical education areas. In Medical Education, group-based on-site escape rooms with a focus on nursing, emergency medicine, pharmacy and interprofessional education dominates the implementation landscape. To further advance the field, stronger emphasis on making explicit the design considerations will advance the research and inform implementations.

Every (multimedia) service needs to be accessible. Accessibility for multimedia content is typically provided by means of access services, of which subtitling is likely the most widespread one. Up to date, many recommendations and solutions for subtitling classical 2D audiovisual services are available. Likewise, recent efforts have been devoted to devising adequate subtitling solutions for VR360 video content. This paper, for the first time, goes a step beyond, by exploring two key requirements to fulfill remaining challenges towards efficiently subtitling 3D Virtual Reality (VR) content: presentation modes, and guiding methods. By leveraging insights from earlier work on VR360 content, the paper proposes novel presentation modes and guiding methods to not only deal with the freedom to explore the omnidirectional scenes, but also with additional specificities of 3D VR compared to VR360 content: depth, 6 Degrees of Freedom (6DoF), and viewing perspectives. The obtained results prove that always-visible and a novel proposed comic-style presentation mode are far more appropriate than state-of-the-art fixed-positioned subtitles, mainly in terms of immersion, ease and comfort of reading, and identification of speakers, when applied to professional pieces of content with limited displacement of speakers and with limited 6DoF (i.e. users are not expected to largely navigate around the virtual environment). Likewise, even in such limited movement scenarios, the results show that the use of indicators (arrows), as guiding methods, is well received. Overall, the paper provides relevant insights and paves the way toward efficiently subtitling 3D VR content.

Growing evidence suggests sleep plays an important role in the development of healthy adolescents, with increased interest in the associations between sleep and mental health. Higher duration and quality of sleep has been suggested as a mechanism for increased wellbeing in adolescents. Cross sectional data was collected from 5,661 Irish adolescents. 55% of Irish adolescents reported meeting the guidelines for adolescents of 8-10 hours per night. This was found to decrease with age. Higher duration and quality of sleep was positively associated with wellbeing and negatively associated with symptoms of anxiety and depression. A higher frequency of physical activity was associated with longer duration and higher quality of sleep. 9-10 hours of sleep was associated with the highest levels of wellbeing and lowest symptoms of anxiety and depression. The relationship between physical activity and increased wellbeing may be impacted by physical activity leading to higher durations and quality of sleep.

Triple-negative breast cancer (TNBC) is a subtype of breast cancer characterized by the lack of estrogen receptors (ER), progesterone receptors, and HER-2 receptors. Thus, TNBC tumours do not benefit from the current therapies targeting ER or HER-2. Therefore, there is an urgent need to develop novel treatment for this subtype of breast cancer. Marijuana is a common name given to Cannabis plants, a group of plants in the Cannabis genus of the Cannabaceae family. Cannabis plants are among the oldest cultivated crops, traced back at least 12,000 years and are well known for their multi-purpose usage, including medicinal purposes. The main active compounds extracted from Cannabis plants are 21-carbon-containing terpenophenolics, which are referred to as phytocannabinoids. Of these, the tetrahydrocannabinol (THC) group contains highly potent cannabinoids, including delta-9-tetrahydrocannabinol (∆9-THC) and delta-8-tetrahydrocannabinol (∆8-THC), which are the most abundant THCs and are largely responsible for psychological and physiological effects of marijuana. The use of Cannabis plants for medicinal purposes was first recorded in 2337 BC in China, where Cannabis plants were used to treat pains, rheumatism, and gout. Recently, several cannabinoids have been approved for a number of treatments, one of which is the treatment of nausea and vomiting caused by chemotherapy in cancer patients. Furthermore, increasing evidence shows that cannabinoids not only attenuate side effects due to cancer treatment, but might also potentially possess direct antitumor effects in several cancer types, including breast cancer. However, anti-tumour activity of marijuana has been variable in different studies and even promoted tumour growth in some cases. In addition, the mechanisms of cannabinoid action in cancer remain unclear. This review summarizes evidence about the mixed actions of cannabinoids in cancer in general and triple-negative breast cancer in particular.

The aerospace industry develops prognosis and health management algorithms to ensure better safety on board. Particularly for in-flight controls where jamming is dreaded. For that, vibration signals are monitored to predict future defect occurrences. However, time series are not labeled according to severity level, and the user can only assess the system health from the data mining procedure. To that extent, we developed a clustering algorithm using a deep neural network core. We encoded the time series into pictures to be feed into an artificially trained neural network: U-NET. From the segmented output, one-dimensional information on cluster frontiers is extracted and filtered without any parameter selection. Then, a kernel density estimation finally transforms the signal into an empirical density. Ultimately, a Gaussian mixture model extracts the latter independent components. The method empowered us to reveal different degrees of severity faults in the studied data, with their respective likelihood without prior knowledge. We compared it to state-of-the-art machine learning algorithms. However, internal clustering results evaluation for time series is an open question. As state-of-the-art indexes were not producing relevant results, we built a new indicator to fulfill this task. We applied the whole method to an actuator consisting of an induction machine linked to a ball screw. This study lays the groundwork for future training of diagnosis and prognosis structures in the health management framework.

Objective: The combination of docetaxel (DTX) with Laser-Activated NanoTherapy (LANT), as a treatment for head and neck cancer (HNC) may enhance the therapeutic efficacy of lower doses of DTX, thereby minimizing the effective dosage, side effects and treatment times. Material and methods: Three HNSCC cell lines, Detroit 562, FaDu, and CAL 27, were treated with four combinations of DTX + LANT to evaluate DTX dose reduction and cell viability. Results: The 1 nM DTX + 5 nM LANT combination was the most effective treatment, increasing cell death over its corresponding DTX monotreatment with approximately 86.6%, 80.7%, and 92.1% cell death for Detroit 562, FaDu, and CAL 27, respectively. In Detroit 562, the 1 nM DTX + 5 nM LANT combination treatment resulted in the highest percentage of DTX dose reduction at 84.6%; in FaDu and CAL 27, the 0.5 nM DTX + 5 nM LANT combination treatment resulted in the highest percentage of DTX dose reduction at 78.2% and 82.4%, respectively. Conclusion: LANT may increase the therapeutic efficacy of DTX at significantly lower doses, which could improve patient outcomes.

Since the 1970s, the application of microprocessor in industrial machinery and the development of computer systems have transformed the manufacturing landscape. The rapid integration and automation of production systems have outpaced the development of suitable human design criteria, creating a deepening gap where human factor was seen as an important source of errors and disruptions. Today the situation seems different: the scientific and public debate about the concept of Industry 4.0 has raised the awareness about the central role humans have to play in manufacturing systems, to the design of which they must be considered from the very beginning. The future of industrial systems, as represented by Industry 4.0, will rely on the convergence of several research fields such as Intelligent Manufacturing Systems (IMS), Cyber-Physical Systems (CPS), Internet of things (IoT), but also socio-technical fields such as social approaches within technical systems. This article deals with different Human dimensions associated with CPS and IoT and focuses on their conceptual evolution of automatization to improve the sociability of such automated production systems and consequently puts again the human in the loop. Hereby, our aim is to take stock of current research trends, and to show the importance of integrating human operators as a part of a socio-technical system based autonomous and intelligent products or resources. As results, different models of sociability as way to integrate human into the broad sense and/or the development of future automated production systems, were identified from the literature and analysed.

The suspended test masses of gravitational-wave (GW) detectors require precise alignment to be able to operate the detector stably and with high sensitivity. This includes the continuous counter-acting of seismic disturbances, which, below a few Hertz, are not sufficiently reduced by the seismic isolation system. The residual angular motion of suspended test masses is further suppressed by the Angular Sensing and Control (ASC) system. However, in doing so, the angular motion can be enhanced by the ASC at higher frequencies where the seismic isolation system is very effective. This has led to sensitivity limitations between about 10 Hz and 25 Hz of the LIGO detectors in past observation runs. The observed ASC noise was larger than simple models predict, which means that more accurate detector models and new simulation tools are required. We present Lightsaber, a new time-domain simulator of the ASC in LIGO. The simulation is a nonlinear simulation of the optomechanical system consisting of the high-power cavity laser beam and the last two stages of suspension in LIGO including the ASC. The main noise inputs are power fluctuations of the laser beam at the input of the arm cavities, read-out noise of sensors used for the ASC, displacement noise from the suspension platforms, and noise introduced by the suspension damping loops. While the plant simulation uses local degrees of freedom of individual suspension systems, the control is applied on a global angular basis, which requires a conversion between the local and global bases for sensing and actuation. Some of the studies that can be done with this simulation concern mis-centering of the beam-spot (BS) position on the test masses, the role of laser power fluctuations for angular dynamics, and the role of the various nonlinear dynamics.

Existing implementations of game design patterns have largely been confined to theoretical or research settings. Weaknesses in these implementations have prevented game design patterns from being properly evaluated as an educational and practical development tool. This paper examines these weaknesses, describes a method of developing and applying patterns that overcome the weaknesses, and evaluates use of the method for game design education and practice. Weaknesses in existing pattern implementations are: omission of design problems, presumption of functional completeness at the level of pattern languages, narrow topical focus, and lack of a concise, repeatable method for pattern production. Several features of the proposed method were specifically built to address these weaknesses, namely the pattern template, the process for connecting patterns into a language and assessing the language’s scope, a rubric for assessing pattern confidence and interconnectivity confidence, and pattern-building exercises. This method was applied in a classroom setting. Results, as assessed by the evaluation of student work, suggest that creating patterns/pattern languages is an effective pedagogical approach. De-signs produced using designer-created patterns closely align with existing design theory and are clearly understood by students. The above results may indicate that the path to gaining wider acceptance of pattern theory as a design framework within game design is not to produce a universal pattern language but to facilitate the creation of case-specific languages, by students and professional designers, that use a shared ontology and thus can be combined easily to solve the diverse sets of problems faced by these groups.

As a hazardous waste, pickling waste liquor must be properly treated. An alternative consists in promoting the formation of ferrous salts from this residue, due to its higher ferrous content. Since FeCl2·4H2O is widely used in several applications, obtaining pure crystals of this material appears to be an interesting prospect. However, this compound has scarcely been investigated. In the present work, FeCl2·4H2O crystals have been obtained from pickling waste liquors. Their structural and morphological characteristics have been investigated by X-ray diffraction, scanning electron microscopy as well as Mössbauer spectroscopy. In addition, the photoluminescence study of the obtained samples was also assessed. It was observed that after some aging time, the obtained crystals change in colour from green to more yellowish. So, the aged sample has also been evaluated, and their structural characteristics are compared with the original crystals. Despite this, the obtained crystals exhibit a FeCl2·4H2O structure, which is not modified with the aging of the sample.

Two histamine receptor subtypes (HR), namely H1R and H4R, as key components, are involved in the transmission of histamine-induced itch. Although exact downstream signaling mechanisms are still elusive, transient receptor potential (TRP) ion channels play important roles in the sensation of histaminergic and non-histaminergic itch. Aim of this study was to investigate the involvement of TRPV1 and TRPA1 channels in the transmission of histaminergic itch. The potential of TRPV1 and TRPA1 inhibitors to modulate H1R- and H4R-induced signal transmission was tested in a scratching assay in mice in vivo and in vitro via Ca2+ imaging of murine sensory dorsal root ganglia (DRG) neurons. The TRPV1 inhibition led to a reduction of H1R- and H4R- induced itch and reduced Ca2+ influx into the neurons. The TRPA1 inhibitor reduced H4R-induced itch and both H1R- and H4R-induced Ca2+ influx. In conclusion, these results indicate that both channels, TRPV1 and TRPA1 are involved in the transmission of histamine-induced pruritus.

We show that an exponential income distribution will emerge spontaneously in a peer-to-peer economic network that shares the publicly available technology. Based on this finding, we identify the exponential income distribution as the benchmark structure of the well-functioning market economy. However, a real market economy may deviate from the well-functioning market economy. We show that the deviation is partly reflected as the invalidity of exponential distribution in describing the super-low income class that involves unemployment. In this regard, we find, theoretically, that the lower-bound u of exponential income distribution has a linear relationship with (per capita) unemployment compensation. In this paper, we test this relationship for the United Kingdom from 2001 to 2015. Our empirical investigation confirms that the income structure of low and middle classes (about 90% of populations) in the United Kingdom exactly obeys exponential distribution, in which the lower-bound u is exactly in line with the evolution of unemployment compensation.

Data independent acquisition - mass spectrometry (DIA-MS) is becoming widely utilised for robust and accurate quantification of samples in quantitative proteomics. Here, we describe the systematic evaluation of the effects of DIA precursor mass range on total protein identification and quantification. We show that a narrow mass range of precursors (~250 m/z) for DIA-MS enables a higher number of protein identifications. Subsequent application of DIA with narrow precursor range (from 400 to 650 m/z) on Arabidopsis sample with spike-in of known proteins identified 34.7% more proteins than in conventional DIA (cDIA) with a wide precursor range of 400-1200 m/z. When combining several DIA-MS analyses with narrow precursor ranges (i.e., 400-650, 650-900 and 900-1200 m/z), we were able to quantify 10,099 protein groups with a median coefficient of variation of <6%. These findings represent a 59.4% increase in the number of proteins quantified than with cDIA analysis. This is particularly important for low abundance proteins, as exemplified by the 6-protein mix spike-in. In cDIA only 5 out of the 6-protein mix were quantified while our approach allowed accurate quantitation of all six proteins.

Modified structure along latent tracks and track formation process have been investigated in poly(allyl diglycol carbonate), PADC, which is well recognized as a sensitive etched track detector. This knowledge is essential to develop novel detectors with improved track registration property. The track structures of protons and heavy ions (He, C, Ne, Ar, Fe, Kr and Xe) have been examined by means of FT-IR spectrometry, covering the stopping power region between 1.2 to 12,000 eV/nm. Through a set of experiments on low-LET radiations – such as gamma ray -, multi-step damage process by electron hits was confirmed in the radiation-sensitive parts of the PADC repeat-unit. From this result, we unveiled for the first-time the layered structure in tracks, in relation with the number of secondary electrons. We also proved that etch pit was formed when at least two repeat-units were destroyed along the track radial direction. To evaluate the number of secondary electrons around tracks, a series of numerical simulations were performed with Geant4-DNA. Therefore, we are proposing new physical criterions to describe the detection thresholds. Futhermore, we propose a present issue of the definition of detection threshold for semi-relativistic C ions. And as a possible chemical criterion, formation density of hydroxyl group is suggested to express the response of PADC.

Alphaviruses, flaviviruses, measles viruses and rhabdoviruses are enveloped single-stranded RNA viruses, which have been engineered as expression vector systems for recombinant protein expression and vaccine development. Due to the presence of non-structural genes encoding the replicase complex, a 200,000-fold amplification of viral RNA occurs in the cytoplasm of infected cells providing extreme transgene expression levels, which is why they are named self-replicating RNA viruses. Expression of surface proteins of pathogens causing infectious disease and tumor antigens provide the basis for vaccine development against infectious diseases and cancer. The self-replicating RNA viral vectors can be administered as replicon RNA, recombinant viral particles, or layered DNA/RNA replicons. Self-replicating RNA viral vectors have been applied for vaccine development against influenza virus, HIV, hepatitis B virus, human papilloma virus, Ebola virus and recently coronaviruses, especially SARS-CoV-2 the causative agent of the COVID-19 pandemic. Measles virus and rhabdovirus vector-based SARS-CoV-2 vaccine candidates have been subjected to clinical trials. Moreover, RNA vaccine candidates based on self-amplifying alphaviruses have also been evaluated in clinical settings. Various cancers such as brain, breast, lung, ovarian, prostate cancer and melanoma have also been targeted for vaccine development. Robust immune responses and protection have been demonstrated in animal models. Clinical trials have shown good safety and target-specific immune responses. Ervebo, the VSV-based vaccine against Ebola virus disease has been approved for human use.

Nonsteroidal anti-inflammatory drugs (NSAIDs), which block the activity of cyclooxygenase (COX) isoenzymes and inhibit the synthesis of prostaglandin, have been used for pain relief. We have developed a method to separate a mixture of three NSAIDs, such as aspirin, paracetamol, and naproxen, using reverse-phase high-performance liquid chromatography (RP-HPLC). An isocratic mobile phase consisting of acidic water and acetonitrile was selected to run at a low flow rate, such as 0.8 mL/min. The mixture of three NSAIDs was injected at a low volume into a C18 column that was 150 mm in length and characterized using a UV detector at 230 nm. We identified three peaks in the chromatogram indicating the three compounds. The elution time of the peaks was less than 10 minutes. To identify multiple peaks on the isocratic flow using a short column, further studies are required regarding the proposed method to generate microfluidic devices for nanoLC.

The survival analysis of the Cancer Genome Atlas (TCGA) dataset is a well-known method to discover the gene expression-based prognostic biomarkers of head and neck squamous cell carcinoma (HNSCC). A cutoff point is usually used in survival analysis for the patients' dichotomization in the continuous gene expression. There is some optimization software for cutoff determination. However, the software's predetermined cutoffs are usually set at the median or quantiles of gene expression value to perform the analyses. There are also few clinicopathological features available on their pre-processed data sets. We applied an in-house workflow, including data retrieving and pre-processing, feature selection, sliding-window cutoff selection, Kaplan-Meier survival analysis, and Cox proportional hazard modeling for biomarker discovery. In our approach for the TCGA HNSCC cohort, we scanned human protein-coding genes to find optimal cutoff values. After adjustment with confounders, the clinical tumor stage and the surgical margin involvement are independent risk factors for patients' prognosis. According to the resulting tables with Bonferroni-adjusted P value under the optimal cutoff and the hazard ratio, three biomarker candidates, CAMK2N1, CALML5, and FCGBP, are significantly associated with the patients' overall survival. We validated this discovery by using the other independent HNSCC dataset (GSE65858). Thus, we suggest the transcriptomic analysis could help for biomarker discovery.

In the search for new 2D materials beyond graphene with similar exemplary properties Stanene the new graphene relative was successfully synthesized and characterized in 2016 [14]. This new material which consists of atomically thin tin (Sn) atoms arranged in a hexagonal lattice has shown great promise in gas sensing applications in its pristine, doped and functionalized forms as evidenced by the recent research outputs following its discovery. Researchers have discovered that with its exotic properties it is highly efficient in the detection of the environmentally harmful gases like SO2, NO2, CO2, NH3 and can serve as a multifunctional gas sensor. In this focused and up-to-date review we aim to group the literature on first principles studies of stanene regards to its application for gas sensing and critically examine the success/failures of its multifunctional gas sensing properties as compared to graphene. We systematically present and discusses how structural deformations, defects and doping effect the gas sensing performance. Despite the impressive progress in the field of gas sensing with stanene shown by first principles calculations, many challenges in large scale synthesis, device fabrication and commercialization need to be addressed. The current review can help understand the current status and drawbacks of stanene and identify future directions in this field.

Determining the vibration environment is crucial to analyzing a design of any mechanical system, especially such dynamic systems as sounding rockets. Accuracy of measurement using accelerometers could be improved by application of mechanical vibration filtering and amplifying devices. This work presents a theoretical description of a tunable filter and amplifier. Principle of work is provided as well as results from application of the device on a sounding rocket are provided. It is shown that implementation of such devices allowed for enhancing the accuracy of acceleration measurements. Conclusions on future implementations are also provided.

Introduction:In this study we evaluated the connivance of oxidative and antioxidative parameters in the pathogenesis of spinal cord injury (SCI). Although the etiology and pathogenesis of SCI remain to be fully understood, it has been suggested that reactive oxygen species (ROS) and oxidative stress may play a significant role in the pathophysiology of SCI. Furthermore, there is little information available in scientific literature about oxidative and antioxidative parameters in SCI patients. Methods:Oxidative stress was determined by measuring the levels of Lipid Peroxides (LPO) and Protein carbonyl in plasma and antioxidative parameters like Glutathione Reductase (GR), catalase and Glutathione peroxidase (GPx) in lysate in 40 SCI patients and 40 healthy subjects without SCI. However, pain was measured by McGill pain questionnaire. Results: Concentrations of catalase (p<0.01), GR (p<0.01) and GPx (p<0.01) were significantly lower in patients with SCI than in controls, and levels of oxidative stress parameters, LPO (p<0.01), Protein carbonyl (p<0.01) were significantly higher in patients than in controls. A significant positive correlation was found between LPO and pain score among SCI patients group. Furthermore, a significant positive correlation was also found between Protein carbonyl and pain score among SCI patients group than in control group. Conclusion: The present results indicate that SCI patients are exposed to oxidative stress and this escalated oxidative stress may play a role in the etiopathogenesis of the disease. Moreover, our results also show that increased oxidative stress parameters are more strongly amalgamated with pain in SCI patients.

Life cycle assessment (LCA) is being included formally in EcoDesign regulations. Especially product carbon footprint will be mandatory in Europe. However, life cycle impact assessment including global warming potential (GWP) in LCA is hampered by several challenges. One of these is lack of water vapor characterization indexes for GWP. A life cycle inventory profile for air transport fuel including water vapor emissions is evaluated with state-of-the-art practice, i.e. EF Method and ILCD 2011 Midpoint+ and neglecting water vapors high altitude GWP compared to carbon dioxide. Then the characterization factor in GWP100 for water vapor and alternate normalization for particulates are introduced. The results are compared. The main findings are that the EF method and ILCD both generate rather realistic results for Particulate Matter and Respiratory Inorganics mid-point indicators, respectively, but the amount of premature deaths should be better allocated to different specific emissions, and that water vapor may dominate the GWP100 result over the usual carbon dioxide. LCIA mid-points need measurable and understandable bases. The common knowledge of water vapor’s GWP100 should not be neglected in LCIA for air transport and beyond where relevant.

The knowledge of the optical properties of biological tissues in a wide spectral range is highly important for the development of noninvasive diagnostic or treatment procedures. The absorption coefficient is one of those properties, from which various information about tissue components can be retrieved. Using transmittance and reflectance spectral measurements acquired from ex vivo rabbit brain cortex samples, allowed to calculate its optical properties in the ultraviolet to the near infrared spectral range. Melanin and lipofuscin, the two pigments that are related to the ageing of tissues and cells were identified in the cortex absorption. By subtracting the absorption of these pigments from the absorption of the brain cortex, it was possible to evaluate the true ratios for the DNA/RNA and hemoglobin bands in the cortex – 12.33 fold (at 260 nm), 12.02 fold (at 411 nm) and 4.47 fold (at 555 nm). Due to the fact that the accumulation of melanin and lipofuscin increases with the ageing of the brain tissues and are related to the degeneration of neurons and their death, further studies should be performed to evaluate the evolution of pigment accumulation in the brain to prevent the development of Alzheimer, Parkinson and stroke pathologies in the brain.