To address the expression pattern of the SARS-CoV-2 receptor ACE2 and the viral priming protease, TMPRSS2, in the respiratory tract, this study investigated RNA sequencing transcriptome profiling of samples of airway and oral mucosa. As shown, ACE2 has medium levels of expression in both small airway epithelium and masticatory mucosa, and high levels of expression in nasal epithelium. The expression of ACE2 is low in mucosal associated invariant T (MAIT) cells, and can’t be detected in alveolar macrophages. TMPRSS2 is highly expressed in small airway epithelium and nasal epithelium, and has lower expression in masticatory mucosa. Our results provide the molecular basis that the nasal mucosa is the most susceptible locus in the respiratory tract for SARS-CoV-2 infection and consequently for subsequent droplet transmission and should be the focus for protection against SARS-CoV-2 infection.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is an etiologic agent of the respiratory disease in humans that is known as coronavirus disease 2019 (COVID19). The first outbreak of the disease was initially documented in Wuhan, Hubei Province, China in late December 2019 where people had experienced SARS pneumonia-like symptoms with unknown etiology. Since then it has been observed that COVID-19 positive patients have been showing mild to severe upper respiratory illness symptoms. The type of virus is known to make its transfer from animals to humans and for the concerned virus; researchers have claimed its origin from bat coronavirus at whole-genome level with a 96 % sequence identity. The COVID-19 virus is very contagious and communicable in nature and has been spread throughout the globe since its first outbreak in China. On March 9, 2020, WHO declared it as a Pandemic, and within a month it was already reported to have shown its presence in 213 countries and territories or areas. As of April 29, 2020, this novel virus infected 3,218,183 people and caused 228,029 mortalities worldwide with a variable mortality rate from 3-13 % across the planet and also varied by age and gender. Diagnosis of the disease is a key component in understanding and controlling the spread of the virus and several techniques have been devised including RT-PCR, ELISA, and sequencing-based approaches. To cure COVID-19 patients as of now we do not have proven to be a safe and effective treatment. Therapeutic options currently under investigation in various parts of the world. However, there are various effective therapeutic targets to repurpose the present antiviral therapy for developing potential interventions against SARS-CoV-2. Boosting the immune system can also help to prevent and spread of COVID-19 using various medication and exercises. In this review, our goal to summarize and discussed the present scientific advancements to fight against this novel pandemic.

BackgroundThe novel virus COVID-19, also known as SARS-CoV‑2, is currently rapidly spreading around the globe and pushing healthcare systems to the limits of their capacity. One of the functions of predictive models is to timely act for epidemic preparedness including hospital preparedness. In Egypt, like many other countries in the world, the epidemic situation and forecasting have not yet sufficiently studied. ObjectiveThe study was carried out to develop a short-term forecast scenario for the COVID-19 epidemic situation in Egypt and predict the hospital needs to accommodate the growing number of cases.MethodsSecondary data from the COVID-2019 daily reports and the report issued 8^th of April by the Egyptian Ministry of Health and Population were used. Due to the daily changing level of knowledge and data, the article reflects the status up to 18 April 2020. The prediction was based on the exponential growth rate model. For the depiction of the situation, the full length of the epidemic timeline was analyzed (from February 14^th till April 18^th). The growth rates and their rates of decline during the period from the 22^nd of March till the 18^th of April were calculated and extrapolated in the coming 7 weeks. The predicted hospital needs were assessed against the announced allocated resources.ResultsThe epidemic curve in Egypt is on the ascending arm as of April, 18. The active cases showed exponential growth from the start of the epidemic till April, 18. At the end of this period time, the recovery rate was 23.12% and the case fatality rate (CFR) was7.39. The case fatality rate median level during the last four weeks was 6.64. The active cases are expected to reach more than 20,000 by late May then starts to decline. The allocated regular hospital beds are predicted to show shortage by the time of the release of the paper. The intensive care units (ICU) beds and ventilators are predicted to show insufficiency on May 6.Conclusions: The COVID-19 epidemic in Egypt is expected to continue on the rise for the next few weeks and expected to start to decline late in May, 2020. Our estimates should be useful in preparedness planning. Serious actions should be taken to provide ICU beds and ventilators enough for the predicted number of cases that would need them, not later than the end of April. Mitigation actions have to continue for the coming 6 weeks or until the epidemic situation is more clearly seen.

The past years saw the rise of genomic biobanks and mega-scale meta-analysis of genomic data that promise to reveal the genetic underpinnings of health and disease. However, the over-representation of Europeans in genomic studies not only limit the global understanding of disease risk and intervention efficacy, but also inhibit viable research into the genomic differences between carriers and patients. Whilst the community has agreed that more diverse samples are required, it is not enough to blindly increase diversity; the diversity must be quantified, compared, and annotated to lead to insight. Genetic annotations from separate biobanks need to be comparable, computable, operate without access to raw data due to privacy concerns. But they must be comparable, both for regular research and to allow international comparison in response to pandemics. Here, we evaluate the appropriateness of commonly used genomic tools used to depict population structure in a standardized and comparable manner. The end goal is to reduce the effects of confounding and learn from genuine variation in genetic effects on phenotypes across populations, which will improve the value of biobanks, locally and internationally, increase the accuracy of association analyses, and inform developmental efforts.

Introduction. Strontium-82/Rubidium-82 (⁸²Sr/⁸²Rb) generators are used widely for positron emission tomography (PET) imaging of myocardial perfusion. In this study, the ⁸²Rb isotope yield and production efficiency of two FDA-approved ⁸²Sr/⁸²Rb generators were compared.Methods. N=515 sequential daily quality assurance (QA) reports from 9 CardioGen-82® and 9 RUBY-FILL® generators were reviewed over a period of 2 years. A series of test elutions was performed at different flow-rates on the RUBY-FILL® system to determine an empirical correction-factor used to convert CardioGen-82® daily QA values of ⁸²Rb activity (dose-calibrator ‘maximum’ of 50 mL elution at 50 mL/min) to RUBY-FILL® equivalent values (integrated ‘total’ of 35 mL elution at 20 mL/min). The generator yield (⁸²Rb) and production efficiency (⁸²Rb yield / ⁸²Sr parent activity) were measured and compared after this conversion to a common scale. Results. At the start of clinical use, the system reported ⁸²Rb activity from daily QA was lower for CardioGen-82® vs RUBY-FILL® (2.3 ± 0.2 vs 3.0 ± 0.2 GBq, p<0.001) despite having similar ⁸²Sr activity. Dose-calibrator ‘maximum’ (CardioGen-82®) values were found to under-estimate the integrated ‘total’ (RUBY-FILL®) activity by ~24% at 50 mL/min. When these data were used to convert the CardioGen-82 values to a common measurement scale (integrated total activity) the CardioGen-82® efficiency remained slightly lower than the RUBY-FILL® system on average (88 ± 4% vs 95 ± 4%, p<0.001). The efficiency of ⁸²Rb production improved for both systems over the respective periods of clinical use.Conclusions. ⁸²Rb generator yield was significantly under-estimated using the CardioGen-82® vs RUBY-FILL® daily QA procedure. When generator yield was expressed as the integrated total activity for both systems, the estimated ⁸²Rb production efficiency of the CardioGen-82® system was ~7% lower than RUBY-FILL® over the full period of clinical use.

The Gauss model for the time evolution of the first corona pandemic wave allows to draw conclusions on the dark number of infections, the amount of heard immunization, the used maximum capacity of breathing apparati and the effectiveness of various non-pharmaceutical interventions in different countries. In Germany, Switzerland and Sweden the dark numbers are 7.4 +/- 6.1, 11.1 +/- 8.5 and 25 +/- 25, respectively. Our method of estimating dark numbers from modeling both, infection and death rates simultaneously spares these countries the laborious, time-consuming and costly medical testing for antibodies of large portions of the population. In Germany the total number of infected persons, including the dark number of infections by the first wave is estimated to be 1.06 +/- 0.60 million, corresponding to 1.28 +/- 0.72 percent of the German population. We work out direct implications from these predictions for managing the 2nd and further corona waves.

Quinine and its less toxic derivatives have served humanity for decades as potent antimalarial drugs. Emergence of drug resistance has narrowed the usage of these drugs in malaria prevention and treatment. Fortunately, these drugs have roles in the treatment of other diseases as well including rheumatic disorders and viral infections. Quinine derivatives have proven antiviral effects, especially against human immunodeficiency virus (HIV), Zika virus (ZiKV), herpes simplex virus (HSV), Ebola virus and dengue virus (DENV). The prophylactic and therapeutic role of Chloroquine/hydroxychroquine has become a topic of interest after the recent outbreak of novel Corona virus-19 (nCoV-19). This virus is also named severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) and WHO has officially named this disease as Corona virus disease 2019 (COVID-19). This lethal virus has affected almost 186 countries of the world till to date just in a period of four months of its outbreak. No approved antiviral drug is existed for the treatment of COVID-19. Therefore, this review is focused on potential prophylactic and therapeutic role of chloroquine/hydroxychlroquine for COVID-19.

A big race for the search for novel lead has begun due to the emergence of COVID-19 across the globe. More than 6,00,000 cases of afflicted patients worldwide has been reported till date with high mortality and morbidity. At present no approved drugs are known for COVID-19. Phylogenetic analysis present strong nucleotide sequence similarity of around 80% with SARS-CoV. Therefore, the drugs used for treating SARS-CoV and MERS are being used for SARS-CoV-2 also. Recently, the crystal structure of COVID-19 is reported and hence, we have used this tom predict the binding affinity with SARS-CoV-2-main protease and prepared a pharmacophore that may be used for future design of novel inhibitors.

Cervical cancer is known as one of the most important cancers in women worldwide. Chemotherapy is a standard treatment for advanced/recurrent cervical cancer in which the prognosis of the disease is really poor and the 1-year survival chance in these patients is maximally 20%. However, resistance to anticancer drugs is a major problem in treating cancer. Cervical cancer stem cells are considered as a fundamental cause of chemo and radio-resistance and also relapse after primary successful treatment. Signaling pathways include a wide range of molecular mechanisms contribute to drug resistance. Recently, microRNAs (miRNAs) are announced as a group of molecular biomarkers involving in response to chemotherapy in cancer patients. As the miRNAs, there are some long non-coding RNAs (LncRNAs) which their aberrant expression is considered as a biomarker for monitoring chemoresistance. In this review, we summarized current reports about the involvement of signaling pathways during chemoresistance in cervical cancer. Then, genes that have been demonstrated their involvement during drug resistance in cervical cancer were tabulated. Further, miRNAs that have been reported as biomarkers during treatment are listed. By bioinformatic analysis, we predictedmiR-335-5p and miR-16-5p as the most potential biomarkers for monitoring resistance to chemotherapy. Finally, long non-coding RNAs that have been introduced in recent studies as novel biomarkers during the response to chemotherapy were mentioned.

A literature review was conducted to summarize the frequency of the D-allele of the angiotensin-converting enzyme-1 in all countries with available data. Using an ecological study design limited to high income countries, we found that the country-level frequency of the D-allele was associated with increased COVID-19 incidence and mortality.

MicroRNA (miRNA) is a typical class of small RNAs that could modulate gene expression in trans at the post-transcriptional level. miRNAs bind to the miRNA binding sites (MBSs) in target mRNAs by sequence complementarity. Alternative splicing (AS) is another commonly occurred process in pre-mRNAs that changes the isoforms of a gene. It is hypothesized that there should be an interaction for gene regulation that involves both AS and miRNA targeting. Studies have verified this hypothesis in the model organism Arabidopsis thaliana. High-throughput sequencing data suggested that in Arabidopsis a considerably large fraction of MBSs are affected by AS events. The overlapping between MBS and AS exceeds the randomly simulated number. Functional experiments have indicated that the AS events are required for the gene expression changes of miRNA targets. Therefore, AS and MBS are mutually favored. The observed expression changes caused by miRNAs could also be contributed by AS events. In the present perspective article, we propose that the AS analysis should be incorporated in the differential-expression analysis of miRNA studies. When defining a differentially-expressed gene, it should be clarified whether the change in gene expression is caused by AS events or solely by miRNA targeting.

Accurate and efficient traffic incident detection methods can effectively alleviate traffic congestion caused by traffic incidents, prevent secondary accidents and improve the safety of urban road traffic.Aiming at the problems that the traditional machine learning event detection method cannot fully extract the parameter characteristics of traffic flow and is not suitable formulti-dimensional and non-linear massive data, we propose a new traffic event detection method(CNN-XGBoost).This method combines the respective advantages of Convolution Neural Network(CNN) and Extreme Gradation Boosting (XGBoost). Firstly, we preprocessed the original freeway traffic incident detection data set by constructing initial variable set, data normalization, data balance processing and dimension reorganization. Secondly,we use CNN network to automatically extract the deep features of event detection data, and use XGBoost as a classifier to classify the extracted features for expressway traffic event detection.Finally, we use the data set of Hangzhou expressway microwave detector in China to carry out simulation experiments on CNN-XGBoost. The experimental results show that compared with XGBoost, CNN, Support Vector Machine (SVM) and Gradient Boosting Decision Tree (GBDT) and other methods, CNN-XGBoost method can effectively improve the accuracy of expressway traffic event detection and has better generalization ability.

Introduction The COVID-19 virus was initially reported in Dec 2019 as the causative agent of a pneumonia breakout in Wuhan China. This virus rapidly spread from China to Europe and the East Coast of the United States eventually reaching the South West United States and indigenous tribes in mid -March. Since, then the indigenous tribes have been devasted by the virus which the Governor of New Mexico has likened as an existential threat. Methodology A PubMed search was performed utilizing the words: Navajo Indian, Indigenous Indian, Wuhan Virus, COVID-19, SARs coronavirus, ACE2, S protein, virulence, clinical presentation, epidemiology, genome, treatment, structure, MERs, pathogenesis and/or pathology alone and in combination with other terms. Each paper was evaluated by three content experts for quality, reproducibility, credibility and reputation of the journal Results: Navajo’s and other indigenous peoples may have elevated levels of ACE2 receptors in their lungs and other tissues allowing greater susceptibility to the COVID-19 virus. Increased levels of diabetes and protein nutrition are directly related to increased morbidity and mortality in this group while obesity, COPD, and heart diseas are not. The increased morbidity and mortality is exasperated by an inability to test for COVID-19 Conclusion: The infectivity rate of Navaho’s on the reservation is 22 times higher than the national average with a death rate near 4%. Comorbidites account for some of the increased morbidity and mortality while lack of access to adequate health care unnecessarily magnifies the poor outcome. The threat to indigenous tribes in the Southwest of COVID-19 is dire.

The study sought to gauge the impact of COVID-19 pandemic in unleashing digital transformation in the education sector in South Africa. In order to gauge the impact, the study tracked the rate at which the 4IR tools were used by various institutions during the COVID-19 lockdown. Data were obtained from secondary sources, mainly newspaper articles, magazines and peer-reviewed journals. The findings are that, in South Africa, during the lockdown, a variety of 4IR tools were unleashed from primary education to higher and tertiary education where educational activities switched to remote learning (online learning). These observations point to the fact that South Africa generally has, some pockets of excellence to drive the education sector into the 4IR, which has the potential to increase access. Access to education, particularly at a higher education level, has always been a challenge due to a limited number of spaces available. Much as this pandemic has brought with it massive human suffering across the globe, there is an opportunity to assess successes and failures of deployed technologies, costs associated with them, and scaling these technologies to improve access.

The war to technology and economic power have been the driver for industrialization in most developed countries. The first industrial revolution (industry 1.0) earned millions for textile mill owners while the second industrial revolution (industry 2.0) opened the way for tycoons and captains of industry like John D. Rockefeller, J.P. Morgan and Henry Ford. The third industrial revolution (industry 3.0) engendered technology giants like Apple and Microsoft, and made magnates of men like Steve Jobs and Bill Gates. Now, the race for the fourth industrial revolution (industry 4.0) is on and there is no option, every country whether developed or developing must participate. Many countries have positively responded to industry 4.0 by developing strategic initiatives to strengthen industry 4.0 implementation. Unlocking the country’s potential to industry 4.0 has been of interest to researchers in the recent past. However, the extent to which industry 4.0 initiatives being launched globally has never been revealed. Therefore, the present study aimed at exploring industry 4.0 initiatives through comprehensive electronic survey of literature to estimate the extend of its launching in different regions. Inferences were drawn from industry 4.0 initiatives in developed nations to be used as the recommendations for East Africa Community. Results of the survey revealed that 117 industry 4.0 initiatives have been launched in 56 countries worldwide consisting of five regions. The country’s percent of industry 4.0 initiatives as per region were: Latin America and the Caribbean (15%), North America (40%), Europe (53%), Asia and Oceania (25%), Middle East and Africa (11%). While the worldwide percent was estimated as 25%. This revealed that the big gap is existing between countries towards the race for industry 4.0.

Increasing evidence points to host Th17 inflammatory responses as contributing to the severe lung pathology and mortality of lower respiratory tract infections from coronaviruses. This includes host inflammatory and cytokine responses to COVID-19 caused by the SARS-2 coronavirus (SARS CoV2). From studies conducted in laboratory animals, there are additional concerns about immune enhancement and the role of potential host immunopathology resulting from experimental human COVID-19 vaccines. Here we summarize evidence suggesting there may be partial overlap between the underlying immunopathologic processes linked to both coronavirus infection and vaccination, and a role for Th17 in immune enhancement and eosinophilic pulmonary immunopathology. Such findings help explain the link between viral-vectored coronavirus vaccines and immune enhancement and its reduction through alum adjuvants. Additional research may also clarify links between COVID-19 pulmonary immunopathology and heart disease.

Objectives Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has high infectivity in humans, attributed to the strong affinity of its spike (S) protein to human angiotensin-converting enzyme 2 (ACE2). Here, we analyzed the structural similarity of the S protein between SARS-CoV-2 and other SARS-related coronaviruses (CoVs). Methods We performed multiple alignment analysis of nine amino acid sequences of CoV S proteins from NCBI with MAFFT web-based software, followed by phylogeny analysis. Three-dimensional structure modeling was performed by SWISS-MODEL. We calculated the template modeling score between the S protein of SARS-CoV-2 and that of other SARS-related CoVs. Results The S1 domain of the unclassified CoV RaTG13 (the host of which is the intermediate horseshoe bat) was structurally very similar to that of SARS-CoV-2, implying that RaTG13 could be the origin of SARS-CoV-2. In addition, the folding property of the entire S protein was nearly the same between SARS-CoV-2 and RaTG13 after the PRRA amino acid insertion was removed from SARS-CoV-2. Conclusions RaTG13 could have a high binding affinity to ACE2, similar to SARS-CoV-2, and it is therefore highly likely to infect other animals. Therefore, massive research and monitoring of CoVs in animals is necessary to prevent future COVID-19-like disasters.

Laws and regulations make powerful contribution in addressing multitudes of public health concerns. We examined the Public Health Act (PHA) in Malawi to understand its relevance to the ever-growing and changing threats posed by infectious and non-infectious diseases. The current Public Health Act of Malawi came into effect in 1948 to protect and preserve public health. The Act has undergone several amendments, the last one being in 1975. It draws much of its inspiration and standards from the 19th century British laws on insanitary housing, poor ventilation, and drainage. Such laws are silent on emerging major public health concerns including non-communicable diseases (NCDs) such as cardiovascular diseases and diabetes as well as road traffic injuries. This makes the Act outdated and ill equipped to address the 21st century public health concerns. Although supplementary legislation such as the HIV/AIDS Act and Mental Treatment Act have recently been enacted, they are yet to be consolidated into the Public Health Act. Consequently, existing policies and strategic plans that are meant to address gaps in public health and ensure coordinated effort lack support of laws and regulations. The Act also places great emphasis on mandatory vaccinations, quarantine and isolation against smallpox, a disease that has long been eradicated. Furthermore, although the Public Health Act outlines powers, duties and penalties, it fails to reinforce acceptable behaviour due to the insignificant penalties for noncompliance. There is a need for immediate and prompt revision and restructuring of the Public Health Act based on scientific evidence. Such laws require adequate consultation and interaction with key experts and stakeholders from a wide range of disciplines.

Glaucoma is a multifactorial neurodegenerative disease, characterized by degeneration of the retinal ganglion cells (RGCs). There has been little progress in developing efficient strategies for neuroprotection in glaucoma. We profiled the retina transcriptome of Lister Hooded rats at 2 weeks after optic nerve crush (ONC) and applied systems biology approaches to better understand the molecular mechanisms related with the retinal remodeling after induction of RGC degeneration. We observed a higher Relative Expression Variability after ONC. Gene expression stability was used as a measure of transcription control and disclosed a robust reduction in the number of very stably expressed genes. Enrichment analysis showed that Complement cascade and Notch signaling pathway were the main affected pathways after ONC. To expand our studies of these two pathways, we examined the coordination of gene expressions within each pathway and with the entire transcriptome. ONC increased the number of synergistically coordinated pairs of genes and the number of similar profiles. This study provided novel findings beyond the regulation of individual gene expression and disclosed changes in the control of expression by Complement cascade and Notch signaling functional pathways important for both RGC degeneration and remodeling of the retinal tissue after ONC.

Primary congenital glaucoma (PCG) is a heterogeneous, inherited, and severe optical neuropathy caused by apoptotic degeneration of the retinal ganglion cell layer. Whole-exome sequencing analysis of one PCG family identified two affected siblings who carried a low-frequency homozygous nonsense GUCA1C variant (c.52G>T/p.Glu18Ter/rs143174402). This gene encodes GCAP3, a member of the guanylate cyclase activating protein family, involved in phototransduction and with a potential role in intraocular pressure regulation. Segregation analysis supported the notion that the variant was coinherited with the disease in an autosomal recessive fashion. GCAP3 was detected immunohistochemically in the adult human ocular ciliary epithelium and retina. To evaluate the ocular effect of GUCA1C loss-of-function, a guca1c knockout zebrafish line was generated by CRISPR/Cas9 genome editing. Immunohistochemistry demonstrated the presence of GCAP3 in the non-pigmented ciliary epithelium and retina of adult wild-type fishes. Knockout animals presented up-regulation of the glial fibrillary acidic protein in Müller cells and evidence of retinal ganglion cell apoptosis, indicating the existence of gliosis and glaucoma-like retinal damage. In summary, our data provide evidence for the role of GUCA1C as a candidate gene in PCG and offer new insights into the function of this gene in the ocular anterior segment and the retina.

This article discuss the effects of heat treatment and lubrication modes on the machinability of an A356 alloy (Al-Si-Mg); the alloy is studied as-received, with solution heat-treated alloy (SHT) as well as with an alloy that is solution heat-treated and then aged at 155, 180 and 220 °C. In the course of machinability evaluation, several criteria including cutting force, surface roughness, tool wears and burr analysis (chip) were studied. The results and analysis in this work indicated that the selected machinability criteria are important and necessary to effectively evaluate the machinability of A356 alloys. The machinability of both materials and tools were estimated in terms of cutting force, chip thickness ratio and burr formation, flank wear and roughness. The effects of different cutting parameters (cutting speed and feed rate) and lubrication modes (dry, mist and wet) on the machinability of the A356 cast alloy were also examined. The influence of heat treatments on the burr formation and surface quality was clearly revealed by the experimental results. Experimental work revealed that cutting forces were influenced significantly by aging and cutting speed. However, the different aging at 155, 180, and 220 °C and the cutting speed significantly affected the machinability of the A356 cast alloy. The results obtained show that a better drilling performance in terms of surface quality occurs at a high feed rate, with dry drilling and artificial aging at T6.

A novel strategy is presented for reliable diagnosis and progression prediction of diseases with special attention to COVID-19 pandemy. A plan is presented for how the model can be implemented worldwide in healthcare and how novel treatments and targets can be detected. The idea is based on poikilosis, pervasive heterogeneity and variation at all levels, systems and mechanisms. Poikilosis in diseases can be taken account in pathogenicity model, which is based on distribution of three independent condition measures – extent, modulation and severity. Pathogenicity model is a population or cohort-based description of disease components. Evidence-based thresholds can be applied to the pathogenicity model and used for diagnosis as well as for early detection of patients in risk of developing the most severe forms of the disease. Analysis of patients with differential course of disease can help in detecting biomarkers of diagnostic and prognostic significance. A practical and feasible plan is presented how the concepts can be implemented in practice. Collaboration of many actors, including the World Health Organization and national health authorities, will be essential for success.

COVID-19 (coronavirus disease 2019) is a public health emergency of international concern caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). As of this time, there is no known effective pharmaceutical, phytopharmaceutical or traditional medicine for cure or prevention of COVID-19, although it is urgently needed. In this review, based on the current understanding of the disease molecular mechanisms of novel Coronavirus SARS-CoV-2 and its closest relative SARS-CoV and other human Coronaviruses, I have identified some naturally occurring plant based substances and Ayurvedic medicinal herbs that could feasibly be tested as a matter of urgency for prevention as well as therapeutic option for COVID-19 in India and other parts of the world. I conclude that dried rhizome of Curcuma longa L. i.e. turmeric, and its active ingredient curcumin may be effective in preventing as well as cure the COVID-19 pandemic due to its proven antiviral activities, this however need to be tested by appropriate clinical trials as research priority.

SARS-CoV2 (corona virus) has spread globally at an unprecedented rate; so far, increasing SARS-CoV2-infected individuals have been identified. Although the situation in China is improving and is currently under control, the outbreak in other countries and its pandemic management is only beginning to develop. Based on 154 SARS-CoV2 genome sequence analyses, we used receptor–ligand docking to identify one potential point mutation (V354F) on the spike structure which enhances spike binding to ACE2 receptors underlying potential super infection. Importantly, the V354F site on spike S1 had been identified in 5/10 infected French patients living in Paris, who sharing 100% identical SARS-CoV2 genomes. With Covid-19 cases increasing rapidly in France that could lead to a new explosion, we suggest that the French government should identify all potential super spreaders and treat them accordingly. In summary, our study provides on of the measures to avoid the potential second worldwide explosion of SARS-CoV2.

Plant sulfite oxidase )SO( is a molybdo-enzyme responsible for the oxidation of excess SO₂/sulfite into non-toxic sulfate. The effect of toxic sulfite level on leaves and fruits was studied in tomato plants with different SO expression levels: wild-type (WT), SO overexpression (OE) and SO RNA interference (Ri) plants. Leaf discs and ripe fruit of plants lacking SO were more susceptible, whereas SO OE plants were more resistant as revealed by remaining chlorophyll content and tissue damage levels. Application of molybdenum further enhanced the tolerance of leaf discs to sulfite by enhancing SO activity in SO OE lines, but not in WT or Ri plants. Notably, incubation with tungsten, the molybdenum antagonist, overturned the effect of molybdenum spray in SO OE plants, revealed by remaining chlorophyll content and SO activity. The results indicate that SO determines, in tomato leaves and ripe fruits, the resistance to toxic sulfite and the application of molybdenum enhances sulfite resistance in OE plants by increasing SO activity. The results suggest that overexpressing SO mechanism can be employed in agriculture with or without molybdenum application, for the development of more tolerate crops and vegetables to higher concentrations of sulfite/SO₂ containing postharvest treatments.

There is a long trail of research studies testing the in vitro and in vivo efficacy of chloroquine and its derivatives in treating and preventing infection by various coronavirus species. More recent findings have highlighted the possibility of treating patients infected with the 2019 novel coronavirus, SARS-CoV-2. This review describes the mechanism of coronavirus infection, the mechanism of action of chloroquine, and summarizes the available literature highlighting the efficacy of chloroquine as an anti-coronavirus agent. These findings should encourage the wider scientific community to conduct thorough research on the possible efficacy of chloroquine and its derivatives in treating and preventing SARS-CoV-2 infection.

In the war against the COVID-19 pandemic, the world is experiencing severe resource constraints. Although transmission routes are well understood, we suspect that they cause different disease consequences. We evaluate them in different forms to understand how they affect infection rates and disease severity. In determining how they affect disease outcome, we evaluated target tissue vulnerability, functional role, defense mechanisms, viral concentration, infection vicinity to target vital tissue, and host factors. We found that direct lung infection is the most lethal transmission route followed by bronchi infection. Transmissions by physical contacts, foods, and blood by low viral concentration (as expected in normal human activities) pose lower or much lower risks unless the infection is followed by subsequent lung exposures. After adding transmission route, treatment timings, and improper treatments into the list of known risk factors, we found that death rate and disability rate for young or healthy persons are nearly zero. We show that population based medical model improperly shifts nominal death rate from few vulnerable people to the population resulting in unnecessary population panic, and such panic is responsible for shutting down human activities and the world economy. Finally, we examined limitations in population-based mitigating measures and proposed for governmental and private adoption community guidelines, which are mainly to enable vulnerable people avoid exposures, prevent non-vulnerable people from serving as viral transmitters, get rid of high-risk exposure modes in working environment, improve safety for people in buses, ships and planes, and reduce death and disability rates for infected people.

Blood Concentrates (BCs) are autologous non-transfusional therapeutical preparations with biological properties applied in tissue regeneration. These BCs differ in the preparation method, in fibrin network architecture, growth factors release as well as in platelet/cell content. Methodological changes result in distinct matrices that can compromise their clinical effectiveness. The present study evaluated the influence of different g-forces and types of tubes in the release of vascular endothelial growth factor (VEGF) from platelet-rich fibrin (PRF) as a function of time. The PRF-like samples were obtained with three g-forces (200, 400, and 800 x g) for 10 minutes in pure glass tubes or in polystyrene-clot activator tubes. Scanning and Transmission electron microscopy was used to morphometric analyzes of PRF’s specimens and flow cytometry was used to quantify VEGF slow release until 7 days. Our results showed that platelets were intact and adhered to the fibrin network, emitting pseudopods and in degranulation. The fibrin network was rough and twisted with exosomic granulations impregnated on its surface. An increase in the concentration of VEGF in the PRF supernatant was observed until 7 days for all g forces (200, 400 or 800 x g), with the highest concentrations observed with 200 x g, in both tubes, glass or plastic. Morphological analyzes showed a reduction in the diameter of the PRF fibers after 7 days. Our results showed that g-force interferes with the shape of the fibrin network in the PRF, as well as affect the release of VEGF stored into platelets. This finding may be useful in applying PRF to skin lesions, in which the rapid release of growth factors can favor the tissue repair process. Our observations point to a greater clarification on the methodological variations related to obtaining PRF matrices, as they can generate products with different characteristics and degrees of effectiveness in specific applications.

Within the family Solanaceae, Withania is a small genus belonging to the Solanoideae subfamily. Here, we report the de novo assembled, complete, plastomed genome sequences of W. coagulans, W. adpressa, and W. riebeckii. The length of these genomes ranged from 154,198 base pairs (bp) to 154,361 bp and contained a pair of inverted repeats (IRa and IRb) of 25,027--25,071 bp that were separated by a large single-copy (LSC) region of 85,675--85,760 bp and a small single-copy (SSC) region of 18,457--18,469 bp. We analyzed the structural organization, gene content and order, guanine-cytosine content, codon usage, RNA-editing sites, microsatellites, oligonucleotide and tandem repeats, and substitutions of Withania plastid genomes, which revealed close resemblance among the species. Both the substitution and insertion and deletion analyses confirmed that the IR region was significantly conserved compared with the LSC and SSC regions. Further comparative analysis among the Withania species highlighted 30 divergent hotspots that could potentially be used for molecular marker development, phylogenetic analysis, and species identification.

Corporate governance is widely suggested by economists and regulators as a solution to reduce agency problems and improve firm performance. However previous studies have failed to generate consistent results. Using a dynamic panel system GMM estimator to alleviate endogeneity concerns we determine the effect of corporate board structure on the performance of a panel of 1265 Chinese firms listed on the Shanghai and Shenzhen stock exchanges from 2010 to 2016. We compare the dynamic system GMM estimator to some commonly used estimators; ordinary least squares (OLS), fixed effects (FE) and the dynamic OLS, and show that these estimates are biased due to endogeneity. The dynamic system GMM estimator incorporates the dynamic nature of internal governance choices to provide valid and powerful instruments that address unobserved heterogeneity and simultaneity. Our results show support for the board model corporate governance mechanism. We find that board size is positive and significantly related to both return on assets and total net profit margin. In addition board independence is positive and significantly related to return on assets but insignificantly related to total net profit margin. Duality was found to have a negative but statistically insignificant relation with firm performance.

An outbreak caused by coronavirus disease 2019 (COVID-19) occurred in Wuhan City, Hubei Province, China, in December 2019. Up to March 2, 2020, at least 80180 cases have been reported. Most of the patients had a history of visiting Hubei Province or contacting with people who had ever stayed in or passed by Hubei Province, or exposed to symptoms. Some patients got infected only from asymptomatic contacts. This study aimed to report the epidemic features and lab identification of a patient confirmed with COVID-19 infection only from asymptomatic contact.

Often touted as an ancient and sustainable practice among indigenous livestock farmers in developing countries, the use of ethno-veterinary medicine is examined within the context of its efficacy. While there are undoubtedly positive implications for adopting knowledge and practice that align with nature, there is both prevalence and ambivalence to the adoption of indigenous plant knowledge and resources for the treatment of livestock infections and diseases. This situation is due to the lack of validation and standardization of the practice in low-income countries, requiring scholarly efforts in developing this indigenous knowledge system.

Sterilisation and preservation of vesicle formulations are an important consideration for their viable manufacture for industry applications, particular those intended for medicinal use. Here we undertake an initial investigation of the stability of hybrid lipid – block copolymer vesicles to common sterilisation and preservation processes, with particular interest in how the block copolymer component might tune vesicle stability. We investigate two sizes of polybutadiene-block-poly(ethylene oxide) polymers (PBd12-PEO11 and PBd22-PEO14) mixed with the phospholipid POPC considering the encapsulation stability of a fluorescent cargo and the colloidal stability of vesicle size distributions. We find that autoclaving and lyophilisation cause complete loss of encapsulation stability under the conditions studied here. Filtering through 200 nm pores appears to be viable for sterilisation for all vesicle compositions with comparatively low release of encapsulated cargo, even for vesicle size distributions which extend beyond the 200 nm filter pore size. Freeze-thaw of vesicles also shows promise for preservation of hybrid vesicles with high block copolymer content. We discuss the process stability of hybrid vesicles in terms of the complex mechanical interplay between bending resistance, stretching elasticity and lysis strain of these membranes and propose strategies for future work to further enhance the process stability of these vesicle formulations.

Sufficient evidence is currently available to demonstrate the reality of the warming of our planet's climate system. Global warming has different effects on climate at the regional and local levels. The detection of changes in extreme events using instrumental data provides further evidence of such warming and allows for the characterization of its local manifestations. The present study analyzes changes in temperature and precipitation extremes in the Mexican state of Zacatecas using climate change indices developed by the Expert Team on Climate Change Detection, Monitoring and Indices (ETCCDI). We studied a 40-year period (1976-2015) using annual and seasonal time scales. Maximum and minimum temperature data were used, as well as precipitation statistics from the Mexican climatology database (CLICOM) provided by the Mexican meteorological service. Weather stations with at least 80% of data availability for the selected study period were selected; these databases were subjected to quality control, homogenization, and data filling using Climatol, which runs in the R programming language. These homogenized series were used to obtain daily grides of the three variables at a resolution of 1.3 km. Results reveal important changes in temperature-related indices, such as the increase in maximum temperature and the decrease in minimum temperature. Irregular variability was observed in the case of precipitation, which could be associated with low-frequency oscillations such as the Pacific Decadal Oscillation and the El Niño–Southern Oscillation. The possible impact of these changes in temperature and the increased irregularity of precipitation could have a negative impact on the agricultural sector, especially given that the state of Zacatecas is the largest national bean producer. The most important problems in the short term will be related to the difficulty of adapting to these rapid changes and the new climate scenario, which will pose new challenges in the future.

Mouse models of alcohol use disorder (AUD) revealed a subtype of purinergic receptors (P2X4Rs) as a promising target for AUD drug development. We have previously demonstrated that residues at the transmembrane (TM)-ectodomain interface and within TM1 segment contribute to the formation of an ethanol action pocket in P2X4Rs. In the present study, we tested the hypothesis that there are more residues in TM segments, which are important for ethanol sensitivity of P2X4Rs. Using site-directed mutagenesis and two-electrode voltage-clamp electrophysiology in Xenopus oocytes, we found that arginine at position 33 (R33) in the TM1 segment plays a role in ethanol sensitivity of P2X4Rs. Molecular models in both closed and open states provided evidence for interactions between R33 and aspartic acid at position 354 (D354) of the neighboring TM2 segment. Further work with mixtures of wild-type (WT) and reciprocal single (R33D:WT, D354R:WT) and double (R33D-D354R:WT) mutants confirmed the importance of this interaction for ethanol sensitivity, ivermectin action and channel function. Additionally, our findings suggest that valine at TM1 position 49 plays a role in P2X4R function by providing flexibility during channel opening. Collectively, these findings identified new activity sites, and suggest the importance of TM1-TM2 interaction for channel function and ethanol sensitivity of P2X4Rs.

Rice-Tartary buckwheat is a special type of Tartary buckwheat with easy hulling thin shell. The local rice-Tartary buckwheat ‘cv. Xiaomiqiao’ (XMQ) was used to explore the characteristics of photosynthesis, starch synthesis, yield and quality, as compared to Tartary buckwheat ‘cv. Jinqiao 2’(JQ2). XMQ showed significantly lower values of net photosynthetic rate, ADPGase activity and starch synthase activity at one or more periods during grain filling, as compared to that of JQ2. The effective branch number and grain number per plant of XMQ were similar to that of JQ2 regardless of different years, but the 1000-grain weight was significantly lighter that resulted in the significantly lower yield. XMQ accumulated similar contents of starch (amylose, amylopectin) and protein (glutelin, albumin, prolamin, globulin) to that of JQ2, but exhibited significantly lower flavonoid content. The values of peak viscosity and hot paste viscosity in XMQ were similar to that of JQ2, but the values of cool paste viscosity, breakdown and setback were significantly lower. In conclusion, XMQ showed low yield due to the insufficient of photosynthesis and starch synthesis. XMQ exhibited high nutritional quality as well as normal Tartary buckwheat and stored 18.88mg g-1 of flavonoid, that can be consumed as daily diet. The present results will provide a basis for food processing and breeding of rice-Tartary buckwheat.

It shows the monetary investigation in west countries the big flow in economy by the gross value change effects, also the value of debt policy with debt management strategies to control the budgetary risk of long-term economy from sustainability. The intellectual policies of inflation, GDP, trade, and services and merchandise trade has effected on the West African country’s monetary policies. The implication of trade by a lag of exchange rate indicators has a positive and significant effect. The estimated results reflect the dynamic implication of trade with liquidity and proper monitoring policies. The GDP, gross value (GVA), debt policies, equity of public administration, trade in service and merchandise trade is positive and significant, all are significant. We suggest the optimum control of liquidity with trade service policy recommendations in different countries. The research method was based on 5 countries from the 16 countries of western African and elaborated by their individual indicators with the least square method. The gross value of debts and public administration controlled the development aim of an entire state with strategic and planned environment for state and reduce the level of inflation in small and enterprise section and the results analyzed the policy makers implement planned in implication of trade with domestic currency and long run endogeneity. The results analyzed the monetary policies affecting the level of growth of an individual country.

What is the function of cognition? On one influential account, cognition evolved to co-ordinate behaviour with environmental change or complexity (Godfrey-Smith 1996). Liberal interpretations of this view ascribe cognition to an extraordinarily broad set of biological systems – even bacteria, which modulate their activity in response to salient external cues, would seem to qualify as cognitive agents. However, equating cognition with adaptive flexibility per se glosses over important distinctions in the way biological organisms deal with environmental complexity. Drawing on contemporary advances in theoretical biology and computational neuroscience, we cash these distinctions out in terms of different kinds of generative models, and the representational and uncertainty-resolving capacities they afford. This analysis leads us to propose a formal criterion for delineating cognition from other, more pervasive forms of adaptive plasticity. On this view, biological cognition is rooted in a particular kind of functional organisation; namely, that which enables the agent to detach from the present and engage in counterfactual (active) inference.

The agricultural sector, even though it has been greatly reduced and is in constant transformation, continues to be of strategic importance. Although it does not represent a quantitatively relevant employment sector, the dynamics are interesting because they reflect the structural, economic and social transformations that are affecting the sector in recent years; there is a growing need for external labour that corresponds to a massive recourse of foreigners to work. Innovative approaches are required to explore the capacity of social farming to create a sustainable and inclusive workplace for migrant. The overall methodological approach of the paper seeks to synthesize fieldwork research and qualitative interviewing to validate the Italian inclusive model. To do this, we have selected four experiences of Italian social agriculture in which migrants are included.

The natural vegetation study was conducted in Kafta-sheraro national park (KSNP) North, Ethiopia to explore floristic composition, structure and regeneration of woody species in the home of African elephant. In the park, the above information is not well documented which is necessary for conservation. Data were collected From August to December 2018. The vegetation data were collected from 161 quadrats of size 20m×20m, 5mx5m for shrub ̸ tree, sapling and seedling respectively. Individual trees and shrubs DBH >=2.5cm and height >=2m were measured using Tape meter and Clinometer respectively. DBH, frequency, density, basal area, and IVI were used for vegetation structure. A total of 70 woody species 46 (65.7%) trees, 18 (25.7%) shrubs and 6 (8.6%) tree ̸ shrub) were identified. The total basal area and density of 79.3 m2 ha-1, and 466 ±12.8 (S.E.) individuals ha-1 were calculated for 64 woody species. Fabaceae was the most dominant family occupied 16 species (23.0%) followed by Combretaceae 8 species (11.4%). Acacia mellifera and Combretum hartmannianum were the most dominant and frequent species. Abnormal patterns of selected woody species were dominantly identified. Regenerating status all the woody plant species was categorized as “Fair” (18.75%), “Poor” (7.81 %) and “None” (73.44%). However, there is good initiation for conservation of the park; still the vegetation of the park was threatened by firewood collection, charcoal production, fire, intensive farming, mining and over grazing. Therefore, the study area as the habitat for the population of the African elephant; the KSNP should be recommended the highest conservation priority and studied the soil seed bank of species having poor regeneration condition.

Despite often leading to platinum resistance, platinum-based chemotherapy continues to be the standard treatment for many epithelial tumors. In this study we analyze and validated the cytogenetic alterations that arise after treatment in four lung and ovarian paired cisplatin-sensitive/resistant cell lines by 1-million array-CGH and qRT-PCR methodologies. RNA-sequencing, functional transfection assays and gene-pathway activity analysis were used to identify genes with a potential role in the development of this malignancy. Results were further explored in 55 lung and ovarian primary tumors and control samples and in two extensive in silico databases. Long-term cell exposure to platinum induces the frequent deletion of ITF2 gene. Its expression re-sensitizes tumor cells to platinum and recovers the levels of Wnt/β-catenin transcriptional activity. ITF2 expression was also frequently downregulated in epithelial tumors, predicting a worse overall survival. We also identified an inverse correlation between ITF2 and HOXD9 expression, revealing that NSCLC patients with lower expression of HOXD9 have a better overall survival rate. We define the implication of ITF2 as a molecular mechanism behind the development of cisplatin resistance probably through the activation of the Wnt-signaling pathway. This data highlights the possible role of ITF2 and HOXD9 as novel therapeutic targets for platinum resistant tumors.

Landslides are a frequent and recurrent problem in hilly regions of India and predicting them is always a challenging task. In this paper, an attempt was made to deal with this problem using advanced physical and numerical modeling methods. Detailed understanding of the initial slope failures is very interesting, and challenging at the same time, in the design and development of wireless sensor network based on early warning of landslide monitoring. A small scale physical model was developed to assess the instability through a sensor network with variable rain fall intensity. This was achieved by increasing the simulated rain water flow intensity in different time spans (dry condition, at t=0 to t= 30 min, 0.5 mm/min at t=30 to t= 60 min, 0.75 mm/min at t=60 to t=91 min and 1 mm/min at t=91 to t= 120 min). The water level and movement in the slope was recorded by rainfall sensor, vibration sensor, soil moisture sensor and a digital camera. The following changes were observed during the slope failure: a) movement of small particles at top of the slope; b) initial failure of medium size soil particle; c) scouring of soil mass; d) whole slope collapse. The obtained results clearly indicated the superiority and effectiveness of the proposed system in providing a factor of safety for the progressive slope.

Almost half of the confirmed COVID-19 cases detected so far in the United Kingdom are part of a large cluster of 13 British nationals who tested positive for SARS-CoV-2 in the UK, Spain, and France. Transmissions among this cluster occurred at a ski resort in France, and originated from a single infected traveller returning from a conference in Singapore where he acquired the virus. At least 21 individuals were exposed to the virus, tested, and quarantined, with 13 of those testing positive between the period of 6th Feb and 15th Feb. Here, all publicly available information about the primarily UK/France cluster is consolidated, providing a complete and accessible summary of the cases and their connections. Notable in this cluster are the number of individuals infected, the apparent absence of any severe illness among those infected, and a case of a `delayed positive' test during isolation after initially testing negative, at least 7 days after last possible contact.

Temperature differences between the atmosphere and river water allow rivers to be used as a hydrothermal energy source. The river-water heat pump system is a relatively non-invasive renewable energy source; however, effluent discharged from the heat pump can cause downstream temperature changes which may impact sensitive fluvial ecosystems. In this study, the water temperature recovery distance of the effluent was estimated for a river section in the Han River Basin, Korea, using the heat transfer equation and the Environmental Fluid Dynamic Code (EFDC) model. Results showed that, compared to the EFDC model, the heat transfer equation tended to overestimate the water temperature recovery distance due to its simplified assumptions. The water temperature recovery distance could also be used as an objective indicator to decide the reuse of downstream river water. Furthermore, as the river system was found to support an endangered fish species that is sensitive to water environment changes, care should be taken to exclude the habitats of protected species affected by water temperatures within water temperature recovery distance.

Lombok earthquake that occurred in July 2018 has three large magnitude earthquakes that caused huge losses; 564 victims died, 1684 injured, 445 343 refugees, and 215 628 houses were damaged. The role of anesthesiology is very important to give prompt therapy for injured victims. This research gave an overview of the important role of Anesthesiologist and the selection of anesthesia techniques during the natural disasters’ victims’ management. This study was conducted by collecting data of all earthquake victims treated at the emergency room (ER) of RSUD NTB on August 6^th and 7^th 2018 and all victims operated during August 5 – 25^th 2018. All data were recorded, analyzed, and presented in descriptive form using frequency, pie chart, and bar diagrams. The result shown that the highest number of patients treated in ER are during the first seven days after the earthquake and reduced to several weeks. The majority of patients treated are trauma patients who need orthopedic surgery. Since limited number of anesthesiologist should be considered with the right selection of anesthesia techniques, so that the disaster preparedness could be prepared well and the disaster management could run well. General anesthesia was widely used than regional anesthesia, but the different is not significant. The type of regional anesthetic drug usually used is lidodex in combination with catapres. The role of anesthesiologist during disaster is important to handle a safe and optimal surgical condition.

Interest in drone solutions in forestry applications is growing. Using drones, datasets can be captured flexibly and at high spatial and temporal resolutions when needed. In forestry applications, fundamental tasks include the detection of individual trees, tree species classification, bio-mass estimation, etc. Deep Neural Networks (DNN) have shown superior results when comparing with conventional machine learning methods such as Multi-Layer Perceptron (MLP) in cases of huge input data. The objective of this research was to investigate 3D convolutional neural networks (3D-CNN) to classify three major tree species in a boreal forest: pine, spruce, and birch. The proposed 3D-CNN models were employed to classify tree species in a test site in Finland. The classifiers were trained with a dataset of 3039 manually labelled trees. Then the accuracies were assessed by employing independent datasets of 803 records. To find the most efficient set of feature combination, we compare the performances of 3D-CNN models trained with hyperspectral (HS) channels, RGB channels, and canopy height model (CHM), separately and combined. It is demonstrated that the proposed 3D-CNN model with RGB and HS layers produces the highest classification accuracy. The producer accuracy of the best 3D-CNN classifier on the test dataset were 99.6%, 94.8%, and 97.4% for pines, spruces, and birches, respectively. The best 3D-CNN classifier produced ~5% better classification accuracy than the MLP with all layers. Our results suggest that the proposed method provides excellent classification results with acceptable performance metrics for HS datasets. Our results show that pine class was detectable in most layers. Spruce was most detectable in RGB data, while birch was most detectable in the HS layers. Furthermore, the RGB datasets provide acceptable results for many low-accuracy applications.

A large amount of concrete waste is generated around the world and its recycling is an urgent issue. In this research, a new approach to recycle concrete waste with wooden waste was studied. Concrete and wooden wastes were crushed, mixed, and heat compacted to produce plates with different water contents and mix proportions at various temperatures, pressures, and durations of compaction. The bending strength of the plates was measured after compaction. The result indicated that with an increase in the percentage of wooden waste in the mixture, pressure, or temperature improved the bending strength. The increase in water content reduced the bending strength. Most of the products exhibited higher bending strength than that of ordinary concrete.

Reliability assessment in traditional power distribution systems has played a key role in power system planning, design, and operation. Recently, new information and communication technologies have been introduced in power systems automation and asset management, making the distribution network even more complex. In order to achieve efficient energy management, the distribution grid has to adopt a new configuration and operational conditions that are changing the paradigm of the actual electrical system. Therefore, the emergence of the cyber-physical systems concept to face future energetic needs requires alternative approaches for evaluating the reliability of modern distribution systems, especially in the smart grids environment. In this paper, a reliability approach that makes use of failure modes of power and cyber network main components is proposed to evaluate risk analysis in smart electrical distribution systems. We introduce the application of Failure Modes and Effects Analysis (FMEA) method in future smart grid systems in order to establish the impact of different failure modes on their performance. A smart grid test system is defined and failure modes and their effects for both power and the cyber components are presented. Preventive maintenance tasks are proposed and systematized to minimize the impact of high-risk failures and increase reliability.

Saccharomyces cerevisiae are a phenotypically diverse species that adapt to a wide variety of environments by exploiting standing genetic diversity and selecting for advantageous mutations. Glyphosate and copper-based herbicides/ fungicides affect non-target organisms, these incidental exposures can impact microbial populations. In this study, glyphosate resistance was found in the historical collection of yeast which was collected over the last century, but only in yeast isolated after the introduction of glyphosate. The highest glyphosate-resistant yeasts were isolated from agricultural sites. However, herbicide application at these sites was not recorded. In an effort to assess glyphosate resistance and impact on non-target microorganisms, yeast were harvested from 15 areas with known herbicidal histories, including an organic farm, conventional farm, remediated coal mine, suburban locations, state park, and a national forest. Yeast representing 23 genera were isolated from 237 samples of plant, soil, spontaneous fermentation, nut, flower, fruit, feces, and tree material samples. Saccharomyces, Candida, Metschnikowia, Klyveromyces, Hanseniaspora, and Pichia were other genera commonly found across our sampled environments. Managed areas had less species diversity and at the brewery, only Saccharomyces and Pichia were isolated. A conventional farm growing RoundUp Ready™ corn had the lowest phylogenetic diversity and the highest glyphosate resistance. The mine was sprayed with multiple herbicides including a commercial formulation of glyphosate; however, the yeast did not have elevated glyphosate resistance. In contrast to the conventional farm, the mine was exposed to glyphosate only one year prior to sample isolation. Glyphosate resistance is an example of the anthropogenic selection of nontarget organisms.

Although the concept of additive manufacturing has been proposed for several decades, momentum of selective laser melting (SLM) is finally starting to build. In SLM, density and surface roughness, as the important quality indexes of SLMed parts, are dependent on the processing parameters. However, there are few studies on their collaborative optimization in SLM to obtain high relative density and low surface roughness simultaneously in the previous literature. In this work, the response surface method was adopted to study the influences of different processing parameters (laser power, scanning speed and hatch space) on density and surface roughness of 316L stainless steel parts fabricated by SLM. The statistical relationship model between processing parameters and manufacturing quality is established. A multi-objective collaborative optimization strategy considering both density and surface roughness is proposed. The experimental results show that the main effects of processing parameters on the density and surface roughness are similar. It is noted that the effects of the laser power and scanning speed on the above objective quality show highly significant, while hatch space behaves an insignificant impact. Based on the above optimization, 316L stainless steel parts with excellent surface roughness and relative density can be obtained by SLM with optimized processing parameters.

This proposal describes the design and development of an interoperable application that supports green open access with long-term sustainability and improved user experience of article deposit. Introduction: The lack of library resources and unfriendly repository user interface are two significant barriers that hinder green open access. Tasked to implement the open access mandate, librarians at an American research university developed a comprehensive system called Easy Deposit 2 to automate the support workflow of green open access. Implementation: Easy Deposit 2 is a web application that is able to harvest newly publications, outreach for manuscript on behalf of the library, and facilitate self-archiving to IR. It is developed and maintained by the library and integrated with the IR. Results and Discussion: The article deposit rate is about 25% with Easy Deposit 2, which increases significantly comparing to the previous period. It also serves as a local database for faculty publications with open access status. The lesson learned is that library cannot rely on a single commercial provider for publication data due to mismatched priorities. Conclusion: Recent IT developments provides new opportunities of innovation like Easy Deposit 2 in supporting open access. Academic librarians are vital in promoting "openness" in scholarly communication such as transparency and diversity in the sharing of publication data.

In this paper, a new identity for the generalized fractional integral is defined, through which new integral inequality for functions whose first derivatives in absolute value are convex. The new generalized Hermite-Hadamard inequality for generalized convex function on fractal sets involving Katugampola type fractional integral is established. We derive trapezoid and mid-point type inequalities connected to these generalized Hermite-Hadamard inequality.

In order to solve the problem of measuring the distance and position between the flanges of two pipelines on the seabed, a measuring device for pulling rope in seawater was designed. Aiming at the sealing problem of the key equipment that is the rotating shaft of the rope winch, this paper used the principle of the magnetic coupling to transfer the driving moment, and adopted the method of converting the dynamic seal into the static seal structure to realize the reliable sealing of the motor. Through the experiment of measuring two pipelines with underwater rope pulling device, it was verified that the measuring accuracy of the device meets the design requirements, and the feasibility of the application of magnetic coupling technology in winch is also verified.

Fabrics comprised of porous fibers could provide effective passive protection against chemical and biological (CB) threats whilst maintaining high air permeability (breathability). Here, we fabricate hierarchically porous fibers consisting of regenerated silk fibroin (RSF) and activated-carbon (AC) prepared through two fiber spinning techniques in combination with ice-templating – namely cryogenic solution blow spinning (Cryo-SBS) and cryogenic wet-spinning (Cryo-WS). The Cryo-WS RSF fibers had exceptionally small macropores (as low as 0.1 µm) and high specific surface areas (SSAs) of up to 79 m2 g-1. The incorporation of AC could further increase the SSA to 210 m2 g-1 (25 wt. % loading) whilst also increasing adsorption capacity for volatile organic compounds (VOCs).

The main aim of this work is to report an alternative energy efficient technique of fabricating flexible thermoelectric generators (TEGs) using printable ink. In this process, we have fabricated thermoelectric (TE) composite thick film and we are experimenting several ways to overcome the challenges of conventional and additive manufacturing methods. Two different mesh sizes of n-type bismuth particle, various binder to thermoelectric (TE) material weight ratio, and two different pressure (200 MPa and 300 MPa) were employed for optimizing the thermoelectric properties of TE composite films. We are also exploring naturally occurring chitosan as a binder. Dimethyl sulfoxide (DMSO) dissolved chitosan was used for the binder and less than 0.2 wt% of chitosan was sufficient for the fabrication of TE inks and composite films. Low energy intensive curing process was employed to evaporate the solvent from the drop casted inks. External uniaxial pressure not only eliminated high energy intensive curing processes but also increased the packing density of the film by removing pores and voids in the chitosan-bismuth composite film. The microstructure analysis reveals that bulk-like structure, which rarely has voids, pores and grain boundaries, was observed in the composite films pressed at sufficiently high pressures. The highest performing composite film was obtained with the conditions of 1:2000 binder to bismuth weight ratio, 100 mesh of particle size, and 300 MPa of pressure. The best performing bismuth chitosan composite film pressed at 300 MPa had the power factor as 4009 ± 391 μW/m·K² with high electrical conductivity value of 7337 ± 522 S/cm. The measured thermal conductivity of the best performing chitosan-bismuth composite film was 4.4 ± 0.7 W/m·K and the figure of merit calculated from the thermal conductivity was 0.27 at room temperature.

Myelin ensheathes selected axonal segments within the nervous system, resulting primarily in nerve impulse acceleration, as well as mechanical and trophic support for neurons. In the central and peripheral nervous systems, various proteins that contribute to the formation and stability of myelin are present, which also harbour pathophysiological roles in myelin disease. Many myelin proteins share common attributes, including small size, high hydrophobicity, multifunctionality, longevity, and intrinsic disorder. With recent advances in protein biophysical characterization and bioinformatics, it has become evident that intrinsically disordered proteins (IDPs) are abundant in myelin, and their flexible nature enables multifunctionality. Here, we review known myelin IDPs, their conservation, molecular characteristics and functions, and their disease relevance, along with open questions and speculations. We place emphasis on classifying the molecular details of IDPs in myelin and correlate these with their various functions, including susceptibility to post-translational modifications, function in protein-protein and protein-membrane interactions, as well as their role as extended entropic chains. We discuss how myelin pathology can relate to IDPs and which molecular factors are potentially involved.

Morphometric analysis of Holocene pebbles from the Sava River gravels, in Zagreb alluvial aquifer system (NW Croatia), revealed distribution of their shapes along 30 km long observed watercourse. Limestones, dolomites and sandstones are determined as major (> 4%), and effusive magmatics, cherts and tuffs as minor lithotypes of the pebbles (up to 4%). Their distributions indicate mainly distant Alpine provenance for carbonate (limestones and dolomites) pebbles and local input for sandstones and minor lithotypes, laterally from the Samoborska gora and Medvednica Mts. Carbonates have predominately disc and sphere shapes, implying also their mainly distant sources. Scattered distributions of pebble shapes (sphere, disc, blade and rod) for sandstones and minor lithotypes indicate multiple sources, some of them probably local. Original sedimentary environments for main pebble lithotypes are tentatively interpreted from their flatness ratios, indicating predominant lake shore environments, followed by moraine and riverbed.

Conventional data visualization software have greatly improved the efficiency of the mining and visualization of biomedical data. However, when one applies a grid computing approach the efficiency and complexity of such visualization allows for a hypothetical increase in research opportunities. This paper will present data visualization examples presented in conventional networks, then go into higher details about more complex techniques related to leveraging parallel processing architecture. Part of these complex techniques include the attempt to build a basic general adversarial network (GAN) in order to increase the statistical pool of biomedical data for analysis as well as an introduction to the project utilizing the decentralized-internet SDK. This paper is meant to show you said conventional examples then go into details about the deeper experimentation and self contained results.

A numerical study for the effect of crest width, breaking parameter and trunk permeability on hydrodynamics and flow behavior in the vicinity of rubble-mound, permeable, zero-freeboard breakwaters (ZFBs) is presented. The modified two dimensional Navier-Stokes equations for two-phase flows in porous media with a Smagorinsky model for the subgrid scale stresses were solved numerically. An immersed-boundary/level-set method was used. The numerical model was validated for the cases of wave propagation over a submerged impermeable trapezoidal bar and over a low-crested permeable breakwater. Five cases of breakwaters were examined, and the main results are: (a) The size of the crest width, B, does not notably affect the wave reflection, vorticity and currents in the seaward region of ZFBs, while wave transmission, currents in the leeward side, and mean overtopping discharge, all decrease with increasing B. A non-monotonic behavior of the wave setup is also observed. (b) As the breaking parameter decreases, wave reflection, transmission, currents, mean overtopping discharge, and wave setup decrease. This observation is also verified by relevant empirical formulas. (c) As the ZFB trunk permeability decreases, an increase of the wave reflection, currents, wave setup, and a decrease of wave transmission and mean overtopping discharge is observed.

Since the 1960s Rare earths (REs) applications gradually have expanded to everyday life. REs have great strategic importance in industrial and technological development, so it is expected an increase in their demand. Among the REs the European Commission considered Cerium and Lanthanum as critical raw materials. This research article studies the adsorption of Ce and La onto two carbon nanomaterials, multiwalled carbon nanotubes (MWCNT) and carboxylic functionalized multiwalled carbon nanotubes (MWCNT_ox). The latter has slightly more affinity for REs than MWCNT. The recovery percentage for Ce were 89 and 98% and in the case of for La were 99 and 92% using 0.8 g of MWCNT and 0.2 g of MWCNT_ox respectively. The adsorption process fits a pseudo second-order kinetic model and the Langmuir isotherm best represented the metal uptake.

Abstract: The second part of the paper develops the approach, suggested in the Entropy 2020, 22(1), 11; https://doi.org/10.3390/e22010011 , which relates ordering in physical systems to their symmetrizing. Entropy is frequently interpreted as a quantitative measure of “chaos” or “disorder”. However, the notions of “chaos” and “disorder” are vague and subjective to a much extent. This leads to numerous misinterpretations of entropy. We propose to see the disorder as an absence of symmetry and to identify “ordering” with symmetrizing of a physical system; in other words, introducing the elements of symmetry into an initially disordered physical system. We explore the initially disordered system of elementary magnets exerted to the external magnetic field H ⃗. Imposing symmetry restrictions diminishes the entropy of the system and decreases its temperature. The general case of the system of elementary magnets demonstrating the j-fold symmetry is treated. The interrelation T_j=T/j takes place, where T and T_j are the temperatures of non-symmetrized and j-fold-symmetrized systems of the magnets correspondingly.

A New monogalactosyldiacylglycerol (MGDG), a known monogalactosylmonoacylglycerol (MGMG) and a known polyunsaturated fatty acid methyl ester (PUFAME) were isolated from the marine dinoflagellate Karenia mikimotoi. The planar structure of the glycolipids was elucidated using MS and NMR spectroscopic analyses and comparisons to the known glycolipid to confirm its structure. The isolation of PUFAME strongly supports the polyunsaturated fatty acid fragment of these glycolipids. The relative configuration of the sugar was deduced by comparisons of 3JHH values and proton chemical shifts with those of known glycolipids. All isolated compounds MGDG, MGMG and PUFAME (1-3) were evaluated for their antimicrobial and anti-inflammatory activity. All compounds modulated macrophage responses, with compound 3 exhibiting the greatest anti-inflammatory activity.

Aim: This study aimed to investigate the association between periampullary diverticulum (PAD) and difficult biliary cannulation, as well as to evaluate the impact of different types of PAD on the cannulation success rate and adverse events. Methods: A total of 636 patients who underwent endoscopic retrograde cholangiopancreatography (ERCP) during the study period were prospectively studied and divided into two groups based on the presence or absence of PAD. In group A, 126 patients had PAD compared with 510 patients in group B without PAD. The primary outcome measurements were ERCP procedures time, selective cannulation techniques, and cannulation difficulty in addition to cannulation success rate and ERCP-related adverse events. The difficult cannulation was analyzed using logistic regression considering age, co-morbidities, the presence of PAD types, and indications as independent factors. Results: The average cohort age was 65.30±16.67 years, and 52.7% were male. Significant higher rates of choledocholithiasis, cholangitis, and biliary pancreatitis were reported in the group of PAD (p<0.05). Successful selective cannulation was achieved in 97.6% in group A and 95.3% in group B (p>0.05). The cannulation time was significantly longer in the presence of PAD (5.1 min, vs. 4.09 min, p<0.05). There was no significant difference in the rate of overall adverse events and post ERCP pancreatic PEP. Conclusion: The presence of PAD did not affect the duration or success of the ERCP procedure. Furthermore, it was associated with longer cannulation time and increase in the cannulation difficulty, especially with PAD type 1.

Up to forty percent of dairy cows develop metritis or endometritis when pathogenic bacteria infect the uterus after parturition. However, resilient cows remain healthy even when exposed to the same pathogens. Here, we provide a perspective on the mechanisms that dairy cows use to prevent postpartum uterine disease. We suggest that resilient cows prevent the development of uterine disease using the three complimentary defensive strategies of avoiding, tolerating and resisting infection with pathogenic bacteria. Avoidance maintains health by limiting the exposure to pathogens. Avoidance mechanisms include intrinsic behaviors to reduce the risk of infection by avoiding pathogens or infected animals, perhaps signaled by the fetid odor of uterine disease. Tolerance improves health by limiting the tissue damage caused by the pathogens. Tolerance mechanisms include neutralizing bacterial toxins, protecting cells against damage, enhancing tissue repair, and reprogramming metabolism. Resistance improves health by limiting the pathogen burden. Resistance mechanisms include inflammation driven by innate immunity and adaptive immunity, with the aim of killing and eliminating pathogenic bacteria. Farmers can also help cows prevent the development of postpartum uterine disease by avoiding trauma to the genital tract, reducing stress, and feeding animals appropriately during the transition period. Understanding the mechanisms of avoidance, tolerance and resistance to pathogens will inform strategies to generate resilient animals and prevent uterine disease.

This study was aimed at investigating the effects of roasting and cryogenic milling on particle size, water solubility, and amount of bioactive components in ginseng root. Samples were pulverized by cryogenic milling, and one treatment condition was selected for each size range (10-50 μm, and >50 μm). The selected samples were roasted at different temperatures (160-200 °C) followed by cryogenic milling. Powdered samples were analyzed for their physicochemical characteristics. Results revealed that roasted samples exhibited significantly smaller particle size than controls (not roasted, p<0.05), and the particle size of roasted samples decreased with increase in roasting temperature until flocculation occurred around 180-190 °C. With decrease in particle size of ginseng; water solubility index, antioxidant activity, total polyphenol content, and total polysaccharide content were observed to increase. Ginseng samples showed an increasing trend in antioxidant activity with decreasing particle size (p>0.05) with significantly higher values for all roasted samples compared to the controls (p<0.05). Non-polar ginsenosides such as Rg2(S), Rg2(R), Rg3(S), Rg3(R), and Rh1(S) showed an increase in temperature-dependent manner. This study revealed that roasting at certain temperature range with cryogenic milling has positive effects on ginseng by reducing its particle size, and increasing water solubility and bioactive components.

This study aimed to decrease the particle size of ginseng by roasting and cryogenic milling to increase its water solubility and physiological activity. The samples were roasted for different times (9–21 min) and generated in different sizes (10–50, and > 50 μm). All roasted samples revealed significantly smaller particle sizes than did non-roasted samples based on Sauter mean diameter (D [3,2], p < 0.05). Further, the particle sizes of roasted samples decreased till roasting up to 15 min. In terms of the water solubility index (WSI), antioxidant activity, total polyphenol content (TPC), and total polysaccharides according to particle size, 10-20 μm-sized samples showed the highest values when compared with >50 μm-sized samples. Based on roasting time, WSI values of all samples roasted for up to 15 min were higher than those of the control (not roasted) (p < 0.05). Antioxidant activity and TPC also increased with increasing roasting time. Total polysaccharide content was the highest upon roasting for 15 min except for the 10-20 μm sample. Ginsenoside content of roasted samples >20 μm size was higher than that of the control (not roasted) except after 15 min of roasting. Therefore, roasting and cryogenic milling are effective in producing ginseng root powder.

An experiment was carried out at Nabogram Khamarbari, near the Manannogor, Sadar Upazila, Noakhali District, Noakhali-3814, Bangladesh during the period from 12th January 2018 to 17th April 2018, with two varieties of tomatillo (Physalis ixocarpa Brot.) SAU tomatillo-1 and SAU tomatillo-2. It was laid out in RCBD method having three replications and was conducted to observe the influence of staking and non-staking on tomatillo cultivation in coastal areas. For the study, growth indicating characters like no. of leaves plant^-1, size of leaf plant^-1, height of each plant, no. of branches plant^-1 and yield attributing parameters such as days to first flowering, days to 50% flowering, no. of fruits branch^-1, fruit weight and yield were obtained from the plants with the treatments of staking and non-staking. A wide variation was observed between two varieties of tomatillo with the effect of these treatments. According to the results highest no. of leaves branch^-1, maximum size of leaves branch^-1, tallest height of each plant, uppermost no. of branches plant^-1, highest no. of fruits branch^-1, maximum weight of each fruit and yield were obtained in the staking treatment over the non-staking treatment of SAU tomatillo-1 and in case of SAU tomatillo-2, with the same parameters the result indicated significantly upper in the staking treatment over non-staking treatment. Considering the two varieties of tomatillo, the outcome were significantly superior with staking treatment for the similar parameters. The findings of the experiment indicated that the best yield (21 tha¹) and highest financial benefit could be obtained by SAU tomatillo-1 and the best tomatillo production in saline soil of coastal areas is possible by cultivating SAU tomatillo-1.

Background: Wheat root rot disease due to soil-borne fungal pathogens leads to tremendous yield losses worth billions of dollars worldwide every year. It is very important to study the relationship between rhizosphere fungal diversity and wheat roots to understand the occurrence and development of wheat root rot disease. Results: A significant difference in fungal diversity was observed between the diseased and healthy groups in the heading stage, but the trend was the opposite in the filling stage. The abundance of most genera with high richness decreased significantly from the heading to the filling stage in the diseased groups; the richness of approximately one-third of all genera remained unchanged, and only a few low-richness genera, such as Fusarium and Ceratobasidium, had a very significant increase from the heading to the filling stage. In the healthy groups, the abundance of most genera increased significantly from the heading to the filling stage; the abundance of some genera did not change markedly, or the abundance of very few genera increased significantly. Physical and chemical soil indicators showed that low soil pH and density, increases in ammonium nitrogen, nitrate nitrogen and total nitrogen contributed to the occurrence of wheat root rot disease. Conclusions: Our results revealed that in the early stages of disease, highly diverse rhizosphere fungi and a complex community structure can easily cause wheat root rot disease. The existence of pathogenic fungi is a necessary condition for wheat root rot disease, but the richness of pathogenic fungi is not necessarily important. The increases in ammonium nitrogen, nitrate nitrogen and total nitrogen contributed to the occurrence of wheat root rot disease. Low soil pH and soil density are beneficial to the occurrence of wheat root rot disease.

This article aims to serve as a guide for the construction of supply chain simulation models designed with a lean approach, using Promodel software. To achieve this, a supply chain was designed for a fictitious company located in the City of Celaya, Guanajuato and a set of suppliers located in different cities within the same State. It was used as a google tool to define the distances between each of the companies. As a final result, a representative model of a supply chain was obtained, as well as a methodology that allows the construction of lean supply chains regardless of the number of companies that comprise it. The effect of the variability in the delivery times between suppliers was incorporated into the simulation model, as well as an equation that calculates the pollution emissions of the vehicles that integrate the network that moves the products between the companies. With this work it is possible to represent networks of supply chains of real world companies, where the variability and contamination factor is included, to facilitate the decision making regarding the number of vehicles, inventory levels, quantities to be shipped, frequency in the shipments, etc. with the purpose of contaminating as little as possible and at the same time preventing interruptions in the supply chain using the least amount of resources possible.

The characterization of thin-film solar cells is of huge importance for obtaining high open-circuit voltage and low recombination rates from the interfaces or within the bulk of the main materials. Among the many electrical characterization techniques, the two- and four-wire probe using the Cascade instrument is of interest since the resistance of the wires, and the electrical contacts can be excluded by the additional two wires in 4-wire probe configuration. In this paper, both two and four-point probes configuration are employed to characterize the CIGS chalcogenide thin-film solar cells. The two-wire probe has been used to measure the current-voltage characteristics of the cell which results in a huge internal resistance. Therefore, the four-wire connection is also used to eliminate the lead resistance to enhance the characterization’s accuracy. The load resistance in the two-wire probe diminishes the photogenerated current density at smaller voltage ranges. In contrast, the proposed four-wire probe collects more current at higher voltages due to enhanced carrier collection efficiency from contact electrodes. The current conduction mechanism is also identified at every voltage region represented by the value of the ideality factor of that voltage region. It is observed that a long time given to the charge collection results in increased current density at a higher voltage. According to the results and device characteristics, a novel double-diode model is suggested to extract the saturation current density, shunt and series resistances and the ideality factor of the cells. These cells are shown to be efficient in terms of low recombination at the interfaces and with lower series resistance as the quality of the materials is in its most possible conductive form. The measured internal resistance and saturation current density and ideality factor of the two measurement configuration is measured and compared.

The paper presents the results of energy and environmental analysis of geothermal CHP plant operation in Polish conditions. As the most favorable, for the geothermal conditions prevailing in Poland, the variant of CHP plant based on Organic Rankine Cycle (ORC) has been taken into consideration. As the case study the existing geothermal well located in the town of Konin in the Wielkopolska voivodship has been chosen. The conceptual design of CHP plant has been proposed and evaluated from energy and environmental point of view. As energy performance criteria the non-renewable primary energy consumption has been chosen. In case of environmental performance carbon dioxide emission has been taken as evaluation criteria. The analysis has been performed for different operating conditions and three working fluids.

Diesel engines, as power equipment, are widely used in the fields of automobile industry, ship and power equipment. Due to wear or faulty adjustment, the valve train clearance abnormal fault is a typical failure of diesel engines, which may result in the performance degradation, even valve fracture and cylinder hit fault. However, the failure mechanism features mainly in time domain and angular domain, on which the current diagnosis methods based, are easily affected by working conditions or hard to extract accurate enough, as the diesel engine keeps running in transient and non-stationary process. This work arms at diagnosing this fault mainly based on frequency band features which would change when the valve clearance fault occurs. For the purpose of extracting a series of frequency band features adaptively，a decomposition technique based on improved variational mode decomposition is investigated in this work. As the connection between the features and the fault is fuzzy, the random forest algorithm is used to analyze the correspondence between features and faults. In addition, the feature dimension is reduced to improve the operation efficiency according to importance score. The experimental results under variable speed condition show that the method based on variational mode decomposition and random forest is capable to detect valve clearance fault effectively.

In the present study, we have followed the hydrothermal path for the synthesis of gold nanoparticles (Au NPs) from the biomaterial Elaeocarpus ganitrus seeds extract, which is a rapid, eco-friendly, non-chemical way. The prepared NPs were thoroughly analyzed by PXRD & HR-TEM studies and also tested for photocatalytic dye degradation and anticancer studies. Besides, antioxidant, antibacterial and anticancer properties of Au NPs were studied. In vitro studies revealed the dose-dependent cytotoxic effect of Au NPs. The prepared nanoparticles showed good cytotoxic impact against Prostate cancer (PC-3) cells line. The results of the present study could contribute to synthesize new and cost-effective drugs from Elaeocarpus ganitrus seeds extract by using bio approach.

In order to reveal the mechanism and influencing factors of high pressure jet cavitation of nozzle in submerged environment, this study focused on the evolutionary process of cavitation bubbles and combined finite volume method and mixed multi-phase flow model to analyze the cavitation, velocity distribution and experimental cavitation intensity of fishing net cleaning equipment. Results show that the cavitation inception, growth and collapse mainly occurred in the peripheral region of the flow field. Ring-shaped cavitation erosion zone appeared on the test sample target. A lot of small dense erosion pits were densely distributed in the ring-shaped erosion zone, erosion marks were observed in the center. The cavitation erosion intensity was greatly affected by the nozzle structure. As the diameter of nozzle increased from 0.6 mm to 1 mm, the maximum gas volume fraction increased by 8.53%. The nozzle outlet enlargement angle greatly increased the cavitation intensity. The nozzle with an outlet angle of 30° exhibited the optimal cavitation erosion performance . The cavitation volume fraction of the nozzle with short necking structure was slightly larger than that of the nozzle with long necking structure at the same level in the necking length rang of 3mm to 7mm. In terms of the influence of nozzle structure on the cavitation erosion effect, the nozzle diameter D ranked the first, followed by the outlet angle α, and the necking length L was at the last.

The manuscript reported the synthesis of Al2O3 nano-coating onto quartz fiber by plasma electrolysis spray for enhanced thermal conductivity and stability. The nano- and micro-sized clusters were partially observed on the coating, while most coating was relatively smooth. It was suggested that the formation of a ceramic coating was followed as the nucleation-growth raw, that is, the formation of the coating clusters was dependent on the fast grow-up partially, implying the inhomogeneous energy distribution in the electrolysis plasma. The deposition of the Al2O3 coating increased the annealing tensile strength from 19.2 MPa to 58.1 MPa. The thermal conductivity of the coated quartz fiber was measured to be 1.17 W m-1 K-1, increased by ~45% compared to the bare fiber. The formation mechanism of the Al2O3 coating was preliminarily discussed. We believe that the thermally conductive quartz fiber with high thermal stability by plasma electrolysis spray will find a wide range of applications in industries.

Low back pain (LBP) is a pandemic and costly musculoskeletal condition in the United States. Patients with LBP may endure surgery, injections, and expensive visits to emergency departments. Some suggest that using physical therapy or chiropractic in the earlier stage of LBP reduces the utilization of expensive health services and lowers the treatment costs. Nevertheless, there is no consistent evidence to declare which one of these methods is a cost-effective treatment within a short (less than a year) period of time. The purpose of this study was to investigate the cost-effectiveness of chiropractic versus physical therapy in the United States. A decision tree analytic model was used for estimating the economic outcomes. The findings showed that in the chiropractic group, the total average cost was $48.56 lower than the physical therapy group, and daily adjusted life years (DALY) was 0.0043 higher than the physical therapy group. Chiropractic care was shown to be a cost-effective alternative compared with physical therapy for adults with at least three weeks of low back pain over six months.

A robust bank industry is a major player in the stability of an economy. The operational efficiency and stability of banks are therefore paramount. By way of financial ratios and Z-score, this study analysed UT Bank’s financial performance prior to the 2017 bank sector reforms in Ghana. Annual financials over a ten year period (2007-2016) were used. Debt management practices of UT Bank per the results obtained were quite on the hind side and unimpressive. This was reflected in the poor leverage and risk management variables. UT Bank would have been unable to meet creditors’ claims considering the mean average values of debt-to-assets and debt-to equity ratios of 0.76 and 0.90 respectively. The entire bank sector will benefit if credit management practices of individual banks are refreshed and worked on. The bank industry regulator should tighten its supervisory and monitoring role over banks to help detect early signs of non-performing banks. The study further recommends that statutory lending limits of banks be re-enforced to uphold the threshold of 10 percent for unsecured loans and 25 percentage for secured loans of net owned funds of the bank.

The known three-component reaction-diffusion system modeling competition and co-existence of different language speakers is under study. A modification of this system is proposed, which is examined by Lie symmetry method; furthermore exact solutions in the form of traveling fronts are constructed and their properties are identified. Plots of the traveling fronts are presented and the relevant interpretation describing the language shift occurred in Ukraine during the Soviet times is suggested

The purpose of this study is to propose a consecutive manufacturing process system to secure the productivity of excellent STKN540B steel tube in the respect of economy and safety as the supporting material for mega structures such as building, bridge and ship. The components of consecutive manufacturing are press-bending, orbital auto welding and steel tube correction. By using STKN540B a high-strength steel material with low yield point that requires a special manufacturing process unlike other steel materials, an actual tube manufacturing is carried out at each stage in this experimental study. With this, the quality of steel tube and the efficiency of the manufacturing process are analyzed to draw out some points to improve in the future.

Toll-like receptor 5 ligand, flagellin, and Vascular Adhesion Protein-1 (VAP-1) are involved in non-alcoholic fatty liver disease (NAFLD). This study aimed to determine whether VAP-1 mediates flagellin-induced hepatic fat accumulation. The effects of flagellin on adipocyte VAP-1 expression were first studied in vitro. Then, flagellin (100 ng/mouse) or saline was intraperitoneally injected to C57BL/6J WT and C57BL/6-Aoc3^-/- (VAP-1 KO) mice on high-fat diet twice a week every two weeks for 10-weeks. After that, the effects on inflammation, insulin signaling, and metabolism were studied in liver and adipose tissues. Hepatic fat was quantified histologically and biochemically. Because flagellin challenge increased VAP-1 expression in human adipocytes, we used VAP-1 KO mice to determine whether VAP-1 regulates the inflammatory and metabolic effects of flagellin in vivo. In mice, VAP-1 mediated flagellin-induced inflammation, leukocyte infiltration and lipolysis in visceral adipose tissue. Consequently, increased release of glycerol led to hepatic steatosis in WT but not KO mice. Flagellin-induced hepatic fibrosis was not mediated by VAP-1. VAP-1 KO mice harbored more inflammation-related microbes than WT, while flagellin did not affect the gut microbiota. Our results suggest that by acting on visceral adipose tissue, flagellin increased leukocyte infiltration that induced lipolysis. Further, the released glycerol participated in hepatic fat accumulation. In conclusion, the results describe that gut microbial flagellin through VAP-1 induced hepatic steatosis.

Eating disorder (ED) symptoms often co-occur with nonsuicidal self-injury (NSSI). This comorbidity is consistent with evidence that trait negative urgency increases risk for both of these phenomena. We previously found that impaired late-stage negative emotional response inhibition (i.e., negative emotional action termination or NEAT) might represent a neurocognitive mechanism for heightened negative urgency among people with NSSI history. The current study evaluated whether relations between negative urgency and ED symptoms similarly reflect deficits in this neurocognitive process. One hundred and five community adults completed an assessment of ED symptoms, negative urgency, and an emotional response inhibition task. Results indicated that, contrary to predictions, negative urgency and NEAT contributed independent variance to the prediction of ED symptoms, while controlling for demographic covariates and NSSI history. Worse NEAT was also uniquely associated with restrictive eating, after accounting for negative urgency. Our findings suggest that difficulty inhibiting ongoing motor responses triggered by negative emotional reactions (i.e., NEAT) may be a shared neurocognitive characteristic of ED symptoms and NSSI. However, negative urgency and NEAT dysfunction capture separate variance in the prediction of ED-related cognitions and behaviors, distinct from the pattern of results we previously observed in NSSI.

Marine sponges, a well documented prolific source of natural products, harbors numerous microbial communities believed to possess N-acyl homoserine lactones (AHLs) mediated Quorum sensing (QS) as one of the mechanisms of interaction. Bacteria and eukaryotic organisms are known to produce molecules that can interfere with QS signaling, thus affecting microbial genetic regulation and function. In the present study, we established the potential for production of both QS signal molecules as well as QS interfering molecules (QSI) in the same sponge species Sarcotragus spinosulus. A total of eighteen saturated acyl chain AHLs were identified along with six putative unsaturated acyl chain AHLs. Bioassay guided purification led to the isolation of two brominated metabolites with QS-interfering activity. The structures of these compounds were elucidated by comparative spectral analysis of 1HNMR and HR-MS data and was identified as 3-Br-N-methyltyramine (1) and 5,6-dibromo-N,N-dimethyltryptamine (2). The QSI activity of compounds 1 and 2 were evaluated using reporter gene assays for long- and short-chain signals (E. coli pSB1075 and E. coli pSB401) and was confirmed by measuring dose dependent inhibition of proteolytic activity and pyocyanin production in P. aeruginosa PAO1. The obtained results showed the co-existence of QS and QSI in S. spinosulus, a complex network which may mediate the orchestrated function of the microbiome within the sponge holobiont.

The purpose of this case study was to evaluate the benefits that evidence-based nutritional and training recommendations could have on the time course of reconditioning following hip arthroplasty in a competitive master triathlete. Methods: During 38 weeks (from 6 weeks prior to surgery through to the return to competition), the athlete was provided with detailed training and nutritional recommendations based on the latest research evidence. Dietary intake (via the remote food photographic method), body composition (via DXA), peak oxygen uptake (VO2peak), peak power output (PPO) and cycling efficiency (GE) were assessed 6 weeks pre- and 8, 12, 18, 21 and 25-weeks post-surgery. Training load was quantified (TRIMP score) daily during the retraining. Results: Total body mass increased by 8.2 kg (attributable to a 3.5 and 4.6 kg increase in fat mass and lean mass, respectively) between week -6 and week 8 despite a reduction in carbohydrate (CHO) intake post-surgery (<3.0g/kg/day). This was accompanied with a decrease in VO2peak, PPO, and GE due to a drop in training load. From week 7, the athlete resumed training and was advised to gradually increase CHO intake according to the demands of training. Conclusions: Eventually the athlete was able to return to competition in week 32 with a higher PPO, improved VO2peak and GE. Throughout retraining, energy availability was maintained around 30 kcal/kg LBM/day, protein intake was high while CHO intake was periodised. Such dietary conditions allowed the athlete to maintain and even increase lean mass, which represents a major challenge with ageing.

Twelve overnight fasted, healthy, male volunteers received on separate days a test breakfast consisting of (A) 100 g fresh white bread (providing 50 g starch) and 250 mL drinking water, (B) the same bread with a supplement of 10 g alpha-cyclodextrin dissolved in the drinking water (250 mL), and (C) 250 mL drinking water containing 25 g alpha-cyclodextrin. Capillary and venous blood samples were collected before breakfast and at regular intervals for a period of 3 hours thereafter. Plasma glucose was determined in capillary blood and plasma insulin in venous blood samples. Breakfast (A) let to the expected rise in blood glucose and insulin concentrations. Breakfast (C) did not produce a significant glycemic and insulinemic response, demonstrating that alpha-cyclodextrin is not hydrolyzed to glucose in the human digestive tract. Mild intestinal symptoms after the ingestion of alpha-cyclodextrin were reported by 4 subjects. The postprandial rises of plasma glucose and insulin were significantly smaller after breakfast (B) than (A). Under the conditions of this study, alpha-cyclodextrin reduced the glycemic and insulinemic index of white bread by 57 and 55 %, respectively. The postprandial time profile of plasma glucose and insulin suggests that, in an initial phase, the digestion of starch is inhibited by alpha-cyclodextrin almost completely. Yet, despite the delayed and reduced digestion of starch, the intake of breakfast (B) was not associated with flatulence or any other gastrointestinal symptoms.

Plants are immobile, and, to overcome harsh environmental conditions, such as drought, salt, and cold, they have evolved complex signaling pathways. Abscisic acid (ABA), an isoprenoid phytohormone, is a critical signaling mediator that regulates diverse biological processes in various organisms. Significant progress has been made in the determination and characterization of key ABA-mediated molecular factors involved in different stress responses, including stomatal closure and developmental processes, such as seed germination and bud dormancy. Since ABA-signaling is a complex signaling network that integrates with other signaling pathways, the dissection of its intricate regulatory network is necessary to understand the function of essential regulatory genes involved in ABA signaling. In the present review, we focus on two aspects of ABA signaling. First, the perception of the stress signal (abiotic and biotic) and the response network of ABA-signaling components that transduce the signal to the downstream pathway to respond to stress tolerance, regulation of stomata, and ABA signaling component ubiquitination. Second, ABA-signaling in plant development processes, such as lateral root growth regulation, seed germination, and flowering time regulation. Examining such diverse signal integration dynamics could enhance our understanding of the underlying genetic, biochemical, and molecular mechanisms of ABA signaling networks in plants.

The current framework of evolutionary theory postulates that evolution relies on random mutations generating a diversity of phenotypes on which natural selection acts. This framework was established using a top-down approach as it originated from Darwinism, which is based on observations made on complex multicellular organisms, and then modified to fit a DNA-centric view. In this article, I argue that, based on a bottom-up approach starting from the physicochemical properties of nucleic and amino acid polymers, we should reject the facts that: i) natural selection plays a dominant role in evolution, and ii) the probability of mutations is independent of the generated phenotype. I will show that the adaptation of a phenotype to an environment does not correspond to organism fitness but rather corresponds to maintaining the genome stability and integrity. In a stable environment, the phenotype maintains the stability of its originating genome, and both (genome and phenotype) are reproduced identically. In an unstable environment (i.e., corresponding to variations in physicochemical parameters above a physiological range), the phenotype no longer maintains the stability of its originating genome but instead influences its variations. Indeed, environment- and cellular-dependent physicochemical parameters define the probability of mutations in terms of frequency, nature and location in a genome. Evolution is non-deterministic because it relies on probabilistic physicochemical rules, and evolution is driven by a bidirectional interplay between genome and phenotype, the phenotype ensuring the stability of the genotype in a cellular and environment physicochemical parameter-depending manner.

Bemisia tabaci (Gennadius) is a polyphagous, highly destructive pest capable of vectoring viruses in most agricultural crops. Currently, information on the distribution and genetic diversity of B. tabaci in South Sudan is not available. The objectives of this study were to investigate the genetic variability of B. tabaci infesting sweet potato and cassava in South Sudan. Field surveys were conducted between August 2017 and July and August 2018 in 10 locations in Juba County, Central Equatoria State, South Sudan. Sequences of mitochondrial DNA cytochrome oxidase I (mtCOI) were used to determine the phylogenetic relationships between sampled B. tabaci. Six distinct genetic groups of B. tabaci were identified including three non-cassava haplotypes (Mediterranean (MED), Indian Ocean (IO) and Uganda) and three cassava haplotypes (Sub-Saharan Africa 1 sub-group 1 (SSA1-SG1), SSA1-SG3 and SSA2). MED predominated on sweet potato and SSA2 on cassava in all the sampled locations. The Uganda haplotype was also widespread, occurring in five of the sampled locations. This study provides important information on the diversity of B. tabaci species in South Sudan. A comprehensive assessment of the genetic diversity, geographical distribution, population dynamics and host range of B. tabaci species in South Sudan is vital for its effective management.

Changes in land-use have been observed in banana-based systems in the African Great Lakes region affected by Xanthomonas wilt disease (XW) of banana. Through participatory focus group discussions (FGDs) and the 4-cell method, changes in land-use were retrospectively assessed in 13 XW-affected landscapes/villages along a 230 km transect from Masisi (XW arrived in 2001) to Bukavu (XW arrived around 2014) in eastern Democratic Republic of Congo during 2015. The four-cell chart ranked land-use by mapping the area under production and the number of households involved in production. Farmers’ perceptions on the sustainability of new land-uses were also documented. Soil nutrient content and erosion levels were measured for five major land-use options/ trajectories on 147 fields across 55 farms in three landscapes along the transect. From being ranked the most important crop (92% of landscapes i.e. produced on large areas of land and by many households) before XW outbreaks, its importance had declined with most households in 36% of the landscapes growing it on smaller farms while in 64% of cases by few households on smaller pots. Farmers uprooted entire banana mats or fields, expanding land under other crops, mainly beans, taro, sweet potato, cassava, maize, coffee and eucalyptus. Species richness did not change at landscape level, though 21 crops were introduced at farm level. Land-use for banana is however still perceived to be more sustainable due to its multi-functional roles. Soils under banana plots were found in general to be better in their chemical attributes while high erosion levels (Mg ha-1 year-1) were observed under cassava (1.7-148.9) compared with banana (0.3-10.7) and trees (0.3-5.9). The current shift away from banana could thus have profound effects on supply of key services and sustainability of the production systems. This study offers a good basis/entry point for interventions in the XW-affected landscapes.

Ulmus species have been widely used in Korean folk medicine because of their anti-inflammatory and antimicrobial properties. We intended to investigate the wound healing effect of the powder of Ulmus parvifolia (UP) root bark in a mouse wound healing model. We also determined the mechanisms of effects of Ulmus parvifolia (UP) in skin and skin wound healing effect using keratinocyte model. in vivo experiments showed that the wound lesions in the mice decreased by U. parvifolia with 200 mesh size of root bark powder and significantly reduced by treatment with UP, compared with those treated with U. macrocarpa (UM). Results from in vitro experiments also revealed that UP extract promoted the migration of human skin keratinocytes. UP powder treatment upregulated the expression of the matrix metalloproteinase-2 and -9 protein and significantly increased transforming growth factor (TGF)-β levels. We confirmed that topical administration of the bark powder of exerted a significant effect on skin wound healing by upregulating the expression of MMP and transforming growth factor-β. TGF-β In, Our study suggests that U. parvifolia may be a potential candidate for skin wound healing including epidermal skin rejuvernation.

Alkali-containing submicron particles were measured continuously during three months, including late winter and spring seasons in Gothenburg, Sweden. The overall aims were to characterize the ambient concentrations of combustion-related aerosol particles and to address the importance of local emissions and long-range transport for the atmospheric concentrations in the urban background environment. K and Na concentrations in the PM1 size range were measured by an alkali aerosol mass spectrometer (Alkali-AMS) and a cluster analysis was conducted. Local meteorological conditions and some other data sets were obtained, and back trajectory analyses and chemical transport model (CTM) simulations were included for the evaluation. The Alkali-AMS cluster analysis indicated three major clusters: 1) biomass burning origin, 2) mixture of other combustion sources, and 3) marine origin. Low temperatures and low wind speed conditions correlated with high concentrations of K-containing particles, mainly due to regional emissions from residential biomass combustion; transport of air masses from continental Europe also contribute to cluster 1. The CTM results indicate that open biomass burning in the eastern parts of Europe may have contributed substantially to high PM2.5 concentrations (and to cluster 1) during an episode in late March. According to the CTM results the mixed cluster (2) is likely to include particles emitted from different source types and no single geographical source region seems to dominate for this cluster. The back trajectory analysis and meteorological conditions indicated that the marine origin cluster was correlated with westerly winds and high wind speed; this cluster had high concentrations of Na-containing particles, as expected for sea salt particles.

Background: Effectiveness of Anastrozole and levonorgestrel-releasing intrauterine device (LNG-IUD, Mirena®) in the treatment of endometriosis. Methods: Randomized clinical trial. Elegibility criteria: Endometriomas >3×4 cm, CA-125>35 U/mL and symptoms suggestive of endometriosis. Thirty-one women were randomized to anastrozole+Mirena®+Conservative Surgery(CS) (n=8), anastrozole+Mirena®+transvaginal ultrasound-guided puncture-aspiration(TUGPA) (n=7), Mirena®+CS (n=9), or Mirena®+TUGPA (n=7). Interventions: Anastrozole 1 mg/day and/or only Mirena® for 6 months. CS or TUGPA one month after starting medical treatment. Results: A significant improvement in symptoms during the treatment (difference of 43%, 95% CI 29.9-56.2) occurred, which was maintained at 1 and 2 years. It was more significant in patients treated with anastrozole. For CA-125, the most significant decrease was observed without anastrozole. After CS for endometriosis, a reduction of findings of endometriomas and long-term recurrences occurred, with or without anastrozole, although anastrozole seems to delay recurrences. At 4,2±1,7 years, 88% of the patients who underwent CS were asymptomatic, compared to only 21% if TUGPA was performed, with or without anastrozole (p=0.019). Conclusion: Dosing anastrozole for 6 months, starting one month before CS of endometriosis, reduces more significantly the painful symptoms and delays recurrences, but has no other significant advantages over the single insertion of LNG-IUD (Mirena®) during the same time.

The purpose of this paper is to test the Kuznets Environmental Curve (KEC) hypothesis for 10 MENA (Middle East and North Africa) countries during the period 1987-2017. To do this, the translogical functional form has been adopted to estimate the relationship between Toxic Gases (TG) emissions, energy consumption and GDP per capita. The results confirm the presence of KEC, GDP per capita and energy consumption have a positive influence on TG emissions, and the presence of a feedback relationship between GDP per capita and energy consumption. As a result, the environmental framework of the selected countries improves as their level of growth has become more advanced. In addition, to reduce TG emissions, MENA countries are expected to significantly increase the use of renewable energy and a more efficient energy policy.

Glioblastoma (GBM) is the most lethal form of brain tumor, characterized by rapid growth and surrounding tissue invasion. The current standard treatment is surgery followed by radiotherapy, and concurrent chemotherapy, typically with temozolomide. Although extensive research has been performed over the past years to develop an effective therapeutic strategy for the treatment of GBM, efforts have not provided major improvements in the overall survival of patients with GBM. Thus, new therapeutic approaches are urgently needed. A major challenge in the development of therapies for central nervous system (CNS) disorders is overcoming the blood–brain barrier (BBB). In this context, the intranasal (IN) route of drug administration has been proposed as a non-invasive alternative route to directly targeting the CNS. In fact, this route of drug administration may bypass the blood-brain barrier and reduce systemic side effects. Recently, formulations have been developed to further enhance nose-to-brain transport, mainly with the use of nano-sized and nanostructured drug delivery systems. The focus of this review will be on the strategies developed to deliver a number of anticancer compounds for the treatment of GBM using the nasal administration. In particular, the specific properties of nanomedicines proposed for the nose-to-brain delivery will be critically evaluated. The number of preclinical and clinical data reviewed support the idea that nasal delivery of anticancer drugs might represent a breakthrough advancement in the fight against GBM.

This paper aims to analyse the mechanical properties response of polylactic acid (PLA) parts manufactured through fused filament fabrication. The influence of six manufacturing factors (layer height, filament width, fill density, layer orientation, printing velocity, and infill pattern) on the flexural resistance of PLA specimens is studied through an L27 Taguchi experimental array. Different geometries have been tested on a four-point bending machine and on a rotating bending machine. From the first experimental phase, an optimal set of parameters deriving in the highest flexural resistance have been determined. Results show that layer orientation is the most influential parameter, followed by layer height, filament width, and printing velocity, whereas the fill density and infill pattern show no significant influence. Finally, the fatigue fracture behaviour is evaluated and compared with previous studies results, to present a comprehensive study of the mechanical properties of the material under different kind of solicitations.

Inflammatory bowel disease (IBD) is a chronic disease mediated by the immune system and characterized by the inflammation of the gastrointestinal tract. This study is to understand how the use of parenteral nutrition (PN) can affect the adult population diagnosed with IBD. We conducted a systematic review, meta-analysis and a meta-regression. On the different databases, (MEDLINE, Scopus, Cochrane, LILACS, CINAHL, WOS) we found 119 registers, the accuracy was 16% (19 registers); After a Full-text review, only 15 research studies were selected for qualitative synthesis and 10 for Meta-analysis and Meta-regression. The variables used were Crohn’s Disease Activity Index (CDAI), albumin, body weight (BW) and post-operative complications (COM). PN has shown to have efficacy for the treatment of IBD and is compatible with other medicines. The CDAI and albumin improve although the effect of PN are greater after a while. However, the effect on the albumin could be less than the observed value in the meta-analysis, due to a possible publication bias. The BW does not change after intervention. COM utilizing PN has been observed, although the proportion is low.

In this review, we highlight new findings that have deepened our understanding of the mechanisms of leukemogenesis, therapy and resistance in APL. PML-RARa sets the cellular landscape of Acute promyelocytic leukemia (APL) by repressing transcription of RARa target genes and disrupting PML-NBs. RAR receptors control the homeostasis of tissue growth, modeling and regeneration, PML NBs are involved in self-renewal of normal and cancer stem cells, DNA damage response, senescence and stress response. Additional somatic mutations in APL mainly involve FLT3, WT1, NRAS, KRAS, ARID1B and ARID1A genes. Treatment outcomes in patients with newly diagnosed APL improved dramatically since the advent of all-trans retinoic acid (ATRA) and arsenic trioxide (ATO). ATRA activates the transcription of blocked genes and degrades PML-RARα, while ATO degrades PML-RARa by promoting apoptosis and has a pro-oxidant effect. Resistance to ATRA and ATO may derive from mutations in the RARa ligand binding domain (LBD) and in the PML-B2 domain of PML-RARa, but such mutations cannot explain the majority of resistances experienced in the clinic, globally accounting for 5-10% of cases. Several studies are ongoing to unravel clonal evolution and resistance, suggesting the therapeutic potential of new retinoid molecules and combinatorial treatments of ATRA or ATO with different drugs acting through alternative mechanisms of action, which may lead to synergistic effects on growth control or induction of apoptosis in APL cells.

Background: Many randomized controlled trials (RCTs) and systematic reviews (SRs) on acupuncture treatment for post-acute stroke dysphagia have been published. Due to conflicting results an overview of SRs to summarize and assess the quality of this evidence to determine whether acupuncture is effective for this disease was conducted. Methods: Seven databases were searched for SRs and/or Meta-analysis of RCTs and quasi-RCTs on acupuncture for post-acute stroke dysphagia. Two authors independently identified SRs and meta-analyses, collected data to assess the quality of included SRs and meta analyses according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and the revised Assessment of Multiple Systematic Reviews (AMSTAR 2). Results: 31 SRs were identified. Quality of 22 SRs was critically low, 5 SRs were low, and 4 Cochrane SRs were moderate when evaluated by AMSTAR2. 17 SRs reported 85.2-96.3% items of PRISMA. Five SRs included explanatory RCTs, 16 SRs included pragmatic RCTs, and 10 SRs included both. Conclusion: Currently evidence on the effectiveness of acupuncture on post-acute stroke dysphagia is low quality. Type of study appeared to have no direct influence on the result, but the primary outcome measures showed a relationship with the quality of SRs. High quality trials with large sample sizes should be the focus of future research. PROSPERO REGISTRATION NUMBER: CRD42019134163

Optimizing the nitrogen (N) timings and rate can improve nutrient uptake, and nutrient-efficiencies, especially of N in wheat under the changing climate scenario. Climatic stress in the form of high temperature and drought resulted in the decreased crop physiology and, ultimately, grain yield. Taking the example of rainfed wheat, we quantified the impact of N application rates as full and split-dose at three variable sites of rainfed Pothwar, Pakistan by conducting field experiments for two years (2013-14 and 201-15). Treatments include, T₁ = Control (No fertilizer applied), full dose of N applied at the time of crop sowing, i.e. T₂ = 50 kg N ha^-1, T₃ = 100 kg N ha^-1 and T₄ = 150 kg N ha^-1 and split application of N at different timings during different stages of the crop called as split application of N, i.e. T₅: Application of 50 kg N ha^-1 (15 kg N ha^-1 (Sowing) : 20 kg N ha^-1 (Tillering) :15 kg N ha^-1 (Anthesis), T₆: Application of 100 kg N ha^-1 (30 kg N ha^-1 (Sowing): 40 kg N ha^-1 (Tillering) : 30 kg N ha^-1 (Anthesis) and T₇: Application of 150 kg N ha^-1(45 kg N ha^-1 (Sowing) : 60 kg N ha^-1 (Tillering) : 45 kg N ha^-1 (Anthesis). Three study sites include viz. Islamabad (High rainfall with optimum temperature), University Research Farm (URF)-Koont (Medium rainfall with moderate temperature), and Talagang (low rainfall with high temperature). Results showed that the highest stomatal conductance (0.80 mole m^-2 sec^-1), net photosynthetic rate (20.07 μmole m^-2s^-1), transpiration rate (9.58 mmole m^-2s^-1), intercellular CO₂ concentration (329.25 μmole CO₂ mol^-1 air), SPAD values (58.86 %) and proline contents (35.42 μg g^-1) were obtained for split application of N (T₆ = Split N₁₀₀) compared to control and full dose of N treatments. Among sites, these physiological traits remained highest at Islamabad and lowest at Talagang, while among years, maximum values of the measured parameters were obtained in 2013-14. A similar trend was observed for crop total N, N efficiencies, and agronomic traits of the crop. Our results suggest that optimum N application rate and its suitable timings can help to harvest real benefits of N as in our findings, split dose resulted in the maximum performance of the crop from physiological parameters to the agronomic traits of the rainfed wheat crop.

In the last decade, the drone market has grown rapidly for both civil and military purposes. Due to their versatility, drones demand is constantly increasing, with several industrial players joining the venture to transfer urban mobility to the air. This has exacerbated the problem of noise pollution, mainly due to the relatively lower altitude of these vehicles and to the proximity of their routes to extremely densely populated areas. In particular, both the aerodynamic and aeroacoustic optimization of the propulsive system and of its interaction with the airframe are key aspects of the design of aerial vehicles for the success or the failure of their mission. The industrial challenge involves finding the best performance in terms of loading, efficiency and weight, and, at the same time, the most silent configuration. For this reason, research has focused on an initial localization of the noise sources and, on further analysis, of the noise generation mechanism, focusing particularly on directivity and scattering. The aim of the present study is to review the noise source mechanisms and the state-of-the-art technologies available in literature for its suppression, focusing especially on the fluid-dynamic aspects of low Reynolds numbers of the propulsive system and on the interaction of the propulsive-system flow with the airframe.

Fusarium head blight (FHB) disease is extensively distributed worldwide. This disease damages grain quality and reduces yield. The detection of this disease in a high throughput way is crucial to planters and breeders. Our study focused on developing a method for processing wheat color images and accurately detecting disease areas using deep learning and image processing techniques. The color images of wheat at the milky stage were collected and processed to construct datasets, which were used to retrain a deep convolutional neural network model using transfer learning. Testing results showed that the model can detect spikes, and the coefficient of determination of the number of spikes between the manual count and the detection was 0.80. The model was assessed, and the mean average precision for the testing dataset was 0.9201. On the basis of the results of spike detection, a new color feature was applied to obtain the gray image of each spike. Then, a modified region growing algorithm was implemented to segment and detect the diseased areas of each spike. Results show that the region growing algorithm performs better than K-means and Otsu’s method in segmenting the FHB disease. Overall, this study demonstrates that deep learning techniques enable the accurate detection of FHB in wheat using color images, and the proposed method can effectively detect spikes and diseased areas, thereby improving the efficiency of FHB detection.