Although solar photovoltaic (PV) system costs have declined, capital cost remains a barrier to widespread adoption. Do-it-yourself (DIY) system designs can decrease costs by about 50% by reducing labor costs, but if not attached to a building structure demand ground penetration for conventional footings. This is not technically and economically feasible at all sites. To overcome these challenges, this study details systems designed to eliminate drilling holes and pouring concrete. Two different designs for both fixed tilt and variable tilt PV racking are investigated to assess their structural integrity, constructability, and economic cost when fabricated with a ballast-supported foundation. The ballast-supported foundations are analyzed for eight such systems by proposing two separate ballast designs: one for single line of post systems, and one for double line of post systems built on a 4-kW basis. The results of the analysis found that both designs are slightly more expensive than typical in-ground concrete systems by 25%, but the overall DIY systems costs remain economically advantageous. Sensitivity analyses are conducted to show how modifications to the dimensions including clearances and distances between gabions influence the weight of the system and thus change the economic value of the design, so users can trade dimensional freedom for cost-savings, and vice versa. Overall, all the wood-based PV racking system designs provide users with cost-effective and easy DIY alternatives to conventional metal racking, and the novel ballast systems presented provide more versatility for PV systems installations.

The environmental issues we are currently facing require long-term prospective efforts for sustainable growth. Renewable energy sources seem to be one of the most practical and efficient alternatives in this regard. Understanding a nation's pattern of energy use and renewable energy production is crucial for developing strategic plans. No previous study has been performed to explore the dynamics of power consumption with the change in renewable energy production on a country-wide scale. In contrast, a number of deep learning algorithms demonstrated acceptable performance while handling sequential data in the era of data-driven predictions. In this study, we developed a scheme to investigate and predict total power consumption and renewable energy production time series for eleven years of data using a Recurrent Neural Network (RNN). The dynamics of the interaction between the total annual power consumption and renewable energy production are investigated through extensive Exploratory Data Analysis (EDA) and a feature engineering framework. The performance of the model is found satisfactory through the comparison of the predicted data with the observed data, visualization of the distribution of the errors and Root Mean Squared Error (RMSE) value of 0.084. Higher performance is achieved through the increase in the number of epochs and hyperparameter tuning. The proposed framework can be used and transferred to investigate the trend of renewable energy production and power consumption and predict the future scenarios for different communities. Incorporation of the cloud-based platform into the proposed pipeline may lead to real-time forecasting.

The ability to self-direct a research program determines graduate degree completion. Yet, research on incompletion of graduate physics programs assume students’ present level of self-direction adequate and neglects to recognize a lack of self-directed learning as key. One theoretical mathematical physicist focused on changing this challenge of physics graduate education by promoting self-directed learning through the type research flow that has been found to bring the greatest satisfaction to researchers with respect to their insights. This he provided through his space, time, open mindedness and theoretical contributions with his students and in collaboration with his colleagues. A self-directed learner himself, David J. Rowe developed methods of mentoring for encouraging physics graduate students to recognize symmetry as valuable in identifying solutions to problems quickly—helping these students take the lead in finding insightful resolutions to complex, multidimensional, mathematical physics uncertainties. How Rowe set about supporting self-directed learning in his graduate physics education interactions will be examined with the use of narrative research to interpret the texts and conversations with the author he made available. His techniques will be presented and recommendations made regarding how Rowe’s work in this regard can be modeled to improve self-direction in STEM graduate education.

The importance of measuring sustainability in tourism has been significantly advancing in recent years, following the need to manage the impact of tourism on territories and hosting communities. It was further boosted by the pandemic, where sustainability has been defined as one of the central elements to restart global tourism. The ETIS model, developed by the European Commission, is a point of reference based on self-assessment, data collection and analysis by the destinations themselves. The application of ETIS toolkit has faced many challenges, especially at sub-national level, mostly related to the lack of available and updated data to feed the model. The hypothesis explored by the authors is to solve the implementation issues, developing an indicator based on the use of the Sentiment Analysis to frame e-reputation and tourism satisfaction, and further combining it with other open data sources. The Tourism Sustainability Index (TSI) can provide a scalable and geo-referenced evaluation of tourism sustainability, measuring the four pillars and sub-components referenced to ETIS criteria, applicable to any tourism destination. Results show that the TSI can be seen as a consistent and valid tool for destinations to analyze sustainability, monitor its evolution through time periods and sub-areas, and compare it to other benchmark or competitive areas.

Maximizing the indications potential and revenue from drugs that are already marketed offers a new take on the famous mantra of the Nobel Prize-winning pharmacologist, Sir James Black, “The most fruitful basis for the discovery of a new drug is to start with an old drug”. However, rational design of drug mixtures poses formidable challenges because of the lack of or limited information about in vivo cell regulation, mechanisms of genetic pathway activation, and in vivo pathway interactions. Most of the repositioned drugs therefore are the result of “serendipity” - based on late phase clinical studies of unexpected findings. One of the reasons that the connection between drug candidates and their potential adverse drug reactions or new applications could not be identified earlier is that the underlying mechanism associating them is either very intricate and unknown or dispersed and buried in a sea of information. Discovery of such multi-domain pharmacomodules - pharmacologically relevant sub-networks of biomolecules and/or pathways - from collection of databases by independent/simultaneous mining of multiple datasets is an active area of research. Here, while presenting some of the promising bioinformatics approaches and pipelines, we summarize and discuss the current and evolving landscape of computational drug repositioning.

The emergence of precision and digital livestock farming presents an opportunity for sustainable animal farming practices that enhance animal welfare and health. However, this transformation of modern animal farming through digital technology has several implications for the technological, social, economic, and environmental aspects of farming. It is crucial to analyze the ethical considerations associated with the digitalization of modern animal farming, particularly in the context of human-animal relationships and potential objectification. This analysis can help develop frameworks for improving animal welfare and promoting sustainability in animal farming.One of the primary ethical concerns of digital livestock farming is the potential for a digital divide between farmers who have access to advanced technologies and those who do not. This could lead to a disparity in animal welfare and health outcomes for different groups of animals. Additionally, the use of artificial intelligence in digital livestock farming may lead to a loss of personal connection between farmers and animals, which could impact the animal's well-being. Another ethical concern of digital livestock farming is the potential for objectification of animals as mere data points. The use of sensors and other monitoring technologies can provide valuable data on animal health and behavior, but it is important to remember that animals are sentient beings with complex emotional and social needs. The use of digital technologies should not lead to neglect of animal welfare or a lack of human responsibility towards animals.Furthermore, social context becomes essential while integrating technologies in the livestock farming to overcome ethics. By considering the cultural and societal norms of different communities, we can ensure that the use of digital technologies does not undermine these values. To address these ethical challenges, the development of standards and codes of conduct for the adoption and implementation of digital livestock farming tools and platforms can help ensure that animal welfare and sustainability are prioritized. This can help alleviate the privacy concerns of stakeholders and improve sustainability in animal farming practices. Additionally, the use of virtual and augmented reality technologies can provide a way to enhance human-animal interactions and provide more personalized care to animals, further promoting animal welfare.

The development of sustainable tourism in the territory requires the monitoring of all diverse aspects of the tourism sector and the creation of information technologies that provide the collection, analysis, processing and visualization of relevant information. The aim of this work is to describe the concept of the tourism monitoring service in Irkutsk Oblast as part of the Lake Baikal area, define methods and software of implementing this service, and present individual results of its prototyping. The creation of a service includes the development and software implementation of methods for collecting, processing and visualizing data, as well as ensuring the use of the functionality of existing cloud platforms for the main information processes. Data collection methods are based on Application Programming Interface and web scraping technologies, processing methods include statistical methods and artificial intelligence methods, visualization methods are based on Business Intelligent systems methods. In this paper described the concept of service, justified methods of data analysis and visualization, built an ontological model, defined the content of dashboards, implemented a prototype of a service, and demonstrated the results of data collection, processing and presentation obtained from the research. Currently, information has been collected and processed for the following tourist attractions: 685 accommodation facilities, 16 services, 809 catering establishments, 352 attractions, 94 tourist routes and excursions. The proposed technology (methods and software) of the territory tourism monitoring service has demonstrated its effectiveness.

Intestinal Parasitic infections are one of the most common infections in tropics. There is paucity of data on prevalence of intestinal parasite infections among migrant construction workers and their house holds so this study was taken up. A cross sectional study was conducted for eight months with an aim to determine the prevalence and assess the associated risk factors among the households of migrant construction workers at AIIMS Bhopal. A semi-structured interview questionnaire survey was conducted prior to collection of stool samples. Each stool sample was examined macroscopically followed by occult blood testing. Wet mount observation was followed by modified acid fast staining and formal ether sedimentation. Recruits with pathogenic parasites in any of the three samples were considered positive and treated as per the national guidelines for age, drug and dose by clinical consultation. 361 participants were recruited. 122/361 (33.8%) were between 21 to 30 years. 55.2% females, 47.4% had occupation of digging soil, 93.1% practiced open field defecation. 36.9% (133/361) was the prevalence of intestinal parasitic infection. 88.7% monoinfection, E.histolytica/dispar (41%) and H.nana( 10.2%) were most prevalent parasites. 26.7%) was commonest. 11.28%coinfection, G. intestinalis with A. duodenale (26.7%) was commonest. In our study only hand washing was independent predictor having Odds Ratio of 3.6 with confidence interval 1.00-13.00(those who don’t wash hands before meals are 3.6 times more likely to develop infection). Only few studies address migrant construction workers, their nomadic behaviour makes them vulnerable for intestinal parasitic infections and not benefitting from prevention programmes as deworming programme.

A number of experiments suggest that the elementary particles are non-local entities. A dissipative self-organization, that treats particles as open systems may provide a better understanding of the underlying phenomena than conservative models. The proposed toy model is such an attempt. We found that self-gravitation (although accompanied by self-diffusion) may not only be compatible with the quantum phenomena but is perhaps the major reason for the existence of quantum fields. According to the proposed model, fields/particles (resemble those of the Standard Model) emerge from a dynamic self-organized medium (which we associate with vacuum dust) from competition between self-gravitation and self-diffusion. These forces produce turbulence in the form of vortices (which we call vacuum cells) that serve as the building blocks for fields and particles. Field/particle features and symmetries are based on their internal (intracellular) dynamics and vortex synchronization (intercellular dynamics). This model allows for rough estimations of relative field coupling strengths, the quantity of charges and flavors, the probabilities of quark transmutations, the dimensionality and the topologies of phase spaces, and other Standard Model parameters that came not from the theory but rather determined by experiment.

In this article we investigate the determinants of marketing or organizational innovators in Europe for 36 countries in the period 2010-2019. We have used data from the European Innovation Scoreboard-EIS of the European Commission. We perform different econometric models i.e. Dynamic Panel, Pooled OLS, Panel Data with Fixed Effects, Panel Data with Random Effects, WLS. Results show that the level of marketing or organizational innovators in positively associated, among others variables to “Innovation Index”, “Innovators” and “Knowledge Intensive Service Exports”, while is negatively associated with “Sales Impacts”, “Foreign Controlled Enterprises Share of Value Added” and “Government procurement of advanced technology products”.

The following article analyzes the determinants of the innovation index in Europe. The data refer to the European Innovation Scoreboard-EIS of the European Commission for the period between 2010 and 2019 for 36 countries. The data are analyzed using the following econometric techniques: Panel Data with Random Effects, Panel Data with Fixed Effects, Dynamic Panel Data, Pooled OLS, WLS. The results show that the Innovation Index is negatively connected to some variables, among which the most significant are "GDP per capita", "R&D expenditure public sector", "Venture capital", "Tertiary education", and positively connected to some variables among which the most relevant are: "Government procurement of advanced technology products", "Average annual population growth", "Finance and support", "Human resources", "Marketing or organisational innovators", "Linkages". A clustering was then carried out using the unsupervised k-Means algorithm optimized with the Silhouette coefficient which shows the presence of 2 clusters per value of the Innovation Index. Eight machine learning algorithms has been used for prediction with real data. The Tree Ensemble Regression algorithm has been chosen as best performer. A further prediction has been made with the augmented data. The result shows that the best performing algorithm is Linear Regression with an innovation index value predicted to grow by approximately 3.38%.

The following article estimates the value of ICT Specialists in Europe between 2016 and 2021 for 28 European countries. The data were analyzed using the following econometric techniques, namely: Panel Data with Fixed Effects, Panel Data with Random Effects, WLS and Pooled OLS. The results show that the value of ICT Specialists in Europe is positively associated with the following variables: "Desi Index", "SMEs with at least a basic level of digital intensity", "At least 100 Mbps fixed BB take-up" and negatively associated with the following variables: "4G Coverage","5G Coverage", "5G Readiness", "Fixed broadband coverage", "e-Government", "At least Basic Digital Skills", "Fixed broadband take-up", "Broadband price index", "Integration of Digital Technology". Subsequently, two European clusters were found by value of "ICTG Specialists" using the k-Means clustering algorithm optimized by using the Silhouette coefficient. Finally, eight different machine learning algorithms were compared to predict the value of "ICT Specialists" in Europe. The results show that the best prediction algorithm is ANN-Artificial Neural Network with an estimated growth value of 12.53%. Finally, "augmented data" were obtained through the use of the ANN-Artificial Neural Network, through which a new prediction was made which estimated a growing value of the estimated variable equal to 3.18%.

The following article analyzes the determinants of e-government in 28 European countries between 2016 and 2021. The DESI-Digital Economy and Society Index database was used. The econometric analysis involved the use of the Panel Data with Fixed Effects and Panel Data with Variable Effects methods. The results show that the value of “e-Government” is negatively associated with “Fast BB (NGA) coverage”, “Female ICT specialists”, “e-Invoices”, “Big data” and positively associated with “Open Data”, “e-Government Users”, “ICT for environmental sustainability”, “Artificial intelligence”, “Cloud”, “SMEs with at least a basic level of digital intensity”, “ICT Specialists”, “At least 1 Gbps take-up”, “At least 100 Mbps fixed BB take-up”, “Fixed Very High Capacity Network (VHCN) coverage”. A cluster analysis was carried out below using the unsupervised k-Means algorithm optimized with the Silhouette coefficient with the identification of 4 clusters. Finally, a comparison was made between eight different machine learning algorithms using "augmented data". The most efficient algorithm in predicting the value of e-government both in the historical series and with augmented data is the ANN-Artificial Neural Network.

This article analyzes the determinants of the "Broadband Price Index" in Europe. The data used refer to 28 European countries between 2016 and 2021. The database used is the Digital, Economy and Society Index-DESI of the European Commission. The data were analyzed using the following econometric techniques, namely Panel Data with Random Effects, Panel Data with Fixed Effects, Pooled OLS, WLS and Dynamic Panel. The value of the "Broadband Price Index" is positively associated with the DESI Index, and "Connectivity" while it is negatively associated with "Fixed Broadband Take Up", "Fixed Broadband Coverage", "Mobile Broadband", "e-Government", "Advanced Skills and Development", "Integration of Digital Technology", "At Least Basic Digital Skills ", "Above Basic Digital Skills "," At Least Basic Software Skills ". A cluster analysis was carried out below using the k-Means algorithm optimized with the Silhouette coefficient. The analysis revealed the existence of three clusters. Finally, an analysis of the machine learning algorithms was carried out to predict the future value of the "Broadband Price Index". The result shows that the most useful algorithm for prediction is the Artificial Neural Network-ANN with an estimated value equal to an amount of 9.21%.

The determinants of the presence of “Foreign Doctorate Students” among 36 European Countries for the period 2010-2019 are analyzed in this article. Panel Data with Fixed Effects, Random Effects, WLS, Pooled OLS, and Dynamic Panel are used to investigate the data. We found that the presence of Foreign Doctorate Students is positively associated to “Attractive Research Systems”, “Finance and Support”, “Rule of Law”, “Sales Impacts”, “New Doctorate Graduates”, “Basic School Entrepreneurial Education and Training”, “Tertiary Education” and negatively associated to “Innovative Sales Share”, “Innovation Friendly Environment”, “Linkages”, “Trademark Applications”, “Government Procurement of Advanced Technology Products”, “R&D Expenditure Public Sectors”. A cluster analysis was then carried out through the application of the unsupervised k-Means algorithm optimized using the Silhouette coefficient with the identification of 5 clusters. Finally, eight different machine learning algorithms were used to predict the value of the "Foreign Doctorate Students" variable. The results show that the best predictor algorithm is the "Tree Ensemble Regression" with a predicted value growing at a rate of 114.03%.

Although distributed additive manufacturing can provide high returns on investment the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by 3-D printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here provides for precise controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built and tested for its ability to provide high tolerance thermopolymer pellets from a number of sizes capable of being used in a FGF printer. In addition, the chopping pelletizer is tested for its ability to chop multi-materials simultaneously for color mixing and composite fabrication as well as precise fractional measuring back to filament. The US$185 open-source 3-D printable pelletizer chopper system was successfully fabricated and has a 0.5 kg/hr throughput with one motor, and 1.0 kg/hr throughput with two motors using only 0.24 kWh/kg during the chopping process. Pellets were successfully printed directly via FGF and indirectly after being converted into high-tolerance filament in a recyclebot.

A study of Bianchi Type I cosmological model is undertaken in the framework of creation of particles. To accommodate the creation of new particles, the universe is regarded as an Open thermodynamical system. The energy conservation equation is modified with the incorporation of a creation pressure in the energy momentum tensor. Exact solutions of the field equations are obtained (i) for a particular choice of the particle creation function and (ii) by considering the deceleration parameter to be constant. In the first model the behavior of the solution at late times is investigated. The physical aspects of the model have also been discussed. In the case of the second model we have restricted our analysis to the power law behaviour for the average scale factor. This leads to a particular form for the particle creation function. The behavior of the solution is investigated and the physical aspects of the model have also been discussed for the matter dominated era.

The popular motor drive systems with a single two-level voltage source inverter (VSI) have one main problem that is the occurrence of the common-mode voltage (CMV), which is an effect of the electromagnetic interference, shaft voltage, bearing currents, leakage current. These cause the high stress, increasung temperature and early mechanical failure in machine. To overcome this problem, the technology of the dual two-level VSI fed open-end three-phase ac loads is now available to eliminate the CMV at the ac/induction motor load with the 120-degree modulation technique for controlling each inverter. In this paper, the discontinuous space vector modulation (DSVM) schemes are proposed and applied for the dual two-level VSI fed open-end load. It is based on the 120-degree modulation technique by using only 12 active voltage vectors and the 10 zero voltage vectors from the total 64 voltage vectors along with the different five-segment swicthing sequence designs with centralizing pulse width modulation technqiue in order to not only cancel the CMV in the ac load, but also reduce the switching number/switching loss of the conversion system. Among the various DSVM schemes, their performances are compared in this paper, such as the number of the switching, the step and peak value of the CMV in each inverter, and the quality of the output waveform, etc. The details of the verfication and comparison are carried out by simulation using Matlab/Simulink software.

A developed six-port reflectometry (SPR) system was integrated to measure the relative permittivity of tumor and normal breast tissue for medical diagnostic purpose. In order to obtain an accurate and precise measurement, the calibration process was done to the SPR using the well-known three-standard technique. Next, the studied dielectric probe was connected to the calibrated measurement-port of the SPR. The open end of the probe aperture was dibbed into the normal and tumor synthetic breast tissue samples to measure the synthetic breast tissues dielectric constant, ɛrʹ, and loss factor, ɛrʺ in the frequency range of 1.5 GHz to 3.3 GHz. Finally, the comparative studies were conducted between commercial VNA with Keysight 85070E dielectric probe and the studied SPR-probe system based on the measured magnitude of the reflection coefficient, phase shift, dielectric constant, and loss factor of the synthetic breast samples. The maximum absolute errors of the measured reflection coefficient magnitude, phase shift, dielectric constant, and loss factor were found to be 0.01, 1.07°, 1.12, and 0.75, respectively. It was ascertained that the predicted dielectric constant, ɛrʹ, is able to differentiate between normal, (ɛrʹ < 50) and tumor, (ɛrʹ > 50) breast tissues.

We introduce the Open Research Knowledge Graph Agriculture Named Entity Recognition (the ORKG Agri-NER) corpus and service for contribution-centric scientific entity extraction and classification. The ORKG Agri-NER corpus is a seminal benchmark for the evaluation of contribution-centric scientific entity extraction and classification in the agricultural domain. It comprises titles of scholarly papers that are available as Open Access articles on a major publishing platform. We describe the creation of this corpus and highlight the obtained findings in terms of the following features: 1) a generic conceptual formalism focused on capturing scientific entities in agriculture that reflect the direct contribution of a work; 2) a performance benchmark for named entity recognition of scientific entities in the agricultural domain by empirically evaluating various state-of-the-art sequence labeling neural architectures and transformer models; and 3) a delineated 3-step automatic entity resolution procedure for the resolution of the scientific entities to an authoritative ontology, specifically AGROVOC that is released in the Linked Open Vocabularies cloud. With this work we aim to provide a strong foundation for future work on the automatic discovery of scientific entities in the scholarly literature of the agricultural domain.

Biocultural heritage preservation relies on ethnobotanical knowledge and the paleoethnobotanical data used in (re)constructing histories of human-biota interactions. Biocultural heritage, defined as the knowledge and practices of Indigenous and Local peoples and their biological relatives, is often guarded information, meant for specific audiences and withheld from other social circles. As such, these forms of heritage and knowledge must also be included in the ongoing data sovereignty discussions and movement. In this paper we share the process and design decisions behind creating an online database for ethnobotanical knowledge and associated paleoethnobotanical data, using a content management system designed to foreground Indigenous and local perspectives. Our main purpose is to suggest the Mukurtu content management system, originally designed for physical items of cultural importance, be considered as a potential tool for digitizing and ethically circulating biocultural heritage, including paleoethnobotanical resources. With this database, we aim to create access to biocultural heritage and paleoethnobotanical considerations for a variety of audiences while also respecting the protected and sensitive natures of Indigenous and local knowledges.

Modern experimental astroparticle physics features large-scale setups measuring different messengers, namely high-energy particles generated by cosmic accelerators (e.g. supernova remnants, active galactic nuclei, etc): cosmic and gamma rays, neutrinos and recently discovered gravitational waves. Ongoing and future experiments are distributed over the Earth including ground, underground/underwater setups as well as balloon payloads and spacecrafts. The data acquired by these experiments have different formats, storage concepts and publication policies. Such differences are a crucial issue in the era of big data and of multi-messenger analysis strategies in astroparticle physics. We propose a service ASTROPARTICLE.ONLINE in the frame of which we develop an open science system which enables to publish, store, search, select and analyse astroparticle physics data. The cosmic-ray experiments KASCADE-Grande and TAIGA were chosen as pilot experiments to be included in this framework. In the first step of our initiative we will develop and test the following components of the full data life cycle concept: (i) describing, storing and reusing of astroparticle data; (ii) software for performing multi-experiment and multi-messenger analyses like deep-learning methods; (iii) outreach including example applications and tutorial for students and scientists outside the specific research field. In the present paper we describe the concepts of our initiative, and in particular the plans toward a common, federated astroparticle data storage.

To assist firefighters and other first responders to use their existing equipment for respiration during the COVID-19 pandemic without using single-use, low-supply, masks, this study outlines an open source kit to convert a 3M-manufactured Scott Safety self-contained breathing apparatus (SCBA) into a powered air-purifying particulate respirator (PAPR). The open source PAPR can be fabricated with a low-cost 3-D printer and widely available components for less than $150, replacing commercial conversion kits saving 85% or full-fledged proprietary PAPRs saving over 90%. The parametric designs allow for adaptation to other core components and can be custom fit specifically to fire-fighter equipment, including their suspenders. The open source PAPR has controllable air flow and its design enables breathing even if the fan is disconnected or if the battery dies. The open source PAPR was tested for air flow as a function of battery life and was found to meet NIOSH air flow requirements for 4 hours, which is 300% over expected regular use.

Spatial Data Infrastructures (SDI) support the harvesting, curating, storage, and sharing of data along with providing access to development, analytic, and visualization tools that enable the building of innovative applications to address broad or specific challenges. SDIs can be especially powerful in bringing together data and tools supporting a particular theme – and this paper discusses and demonstrates the value of an SDI focused on Health. Many potential benefits of a Health SDI are proposed, and the case of supporting emergency response efforts is developed in detail. Leveraging a Health SDI, a Health Risk Index was created that provides emergency response personnel (both Emergency Operations Managers and Emergency Medical Responders) key insights into the unique health risks the impacted population faces due to the disaster. In order to establish the Health Risk Index, datasets from multiple national and global sources representing health data and social data that influences health outcomes – typically called social determinants of health – are harvested, merged, and republished to support further efforts at advancing the Health Risk Index. Visualizations of the Health Risk Index at the global, national, and sub-national levels down to the address level are presented along with demonstrations of its use.

This paper aims at computing feasible control strategies and the corresponding feasible state trajectories to drive an autonomous rear-axle bicycle robot from a given initial state to a final state such that the total running cost is minimized. Pontryagin’s Minimum Principle is applied and derives the optimality conditions from which the feasible control functions, expressed as functions of state and costate variables, are substituted into the combined state-costate system to obtain a new free-control state-costate nonlinear system of ordinary differential equations. A computer program was written in Scilab to solve the combined state-costate system and obtain the feasible state functions, the feasible costate functions and the feasible control functions. Associated Computational Simulations were provided to show the effectiveness and the reliability of the approach.

The PLM concept implies the use of heterogeneous information resources at different stages of the product life cycle, the joint work of which allows you to effectively solve the problems of product quality and various costs. According to the principle of isomorphism of regularities of complex systems, an effective PLM system must have these regularities. Unfortunately, this principle is not often fundamental when designing PLM systems. The purpose of the work is to show, using a simple example, the principles of development, operation and use of an educational multi-agent PLM system, the main purpose of which is to study and research these regularities in the life cycle of a special threaded connection. The multi-agent approach to the development of a PLM system provides the necessary prerequisites for the emergence of system-wide regularities in it. The parallel work of agents is implemented using the actor model and the Ray Python-package. Agents for the logical inference of knowledge base facts, CAD/FEA/CAM/SCADA agents, agents for optimization by various methods, and other agents have been developed. Open source software was used to develop the system. Each agent has relatively simple behavior, implemented by its rule function, and can interact with other agents. The system can work in interactive mode with the user or in automatic mode according to a simple algorithm: the rule functions of all agents are executed until at least one of them returns a value other than None. Examples of the operation of the system are given and such system-wide regularities as emergence, historicity and self-organization are demonstrated in it.

Access to nasopharyngeal swabs for sampling remain a bottleneck in some regions for COVID-19 testing. This study develops a distributed manufacturing solution using only an open source manufacturing tool chain consisting of two types of open source 3-D printing and batch UV curing, and provides a parametric fully free design of a nasopharyngeal swab. The swab was designed using parametric OpenSCAD in two components (a head with engineered break point and various handles), which has several advantages: i) minimizing print time on relatively slow SLA printers, ii) enabling the use of smaller print volume open source SLA printers, iii) reducing the amount of relatively expensive UV resin, and iv) enabling production of handle on more accessible material extrusion 3-D printers. A modular open source UV LED box was designed, fabricated for $45 and tested for batch curing. Swabs can be fabricated for $0.06-$0.12/swab. The results of the mechanical validation tests showed that the swabs could withstand greater forces than would be expected in normal clinical use. The swabs were also able to absorb a significant amounts of synthetic mucus materials and passed abrasion and handling tests. The results show the open source swab are promising candidates for clinical trials.

Porcine circovirus type 2 (PCV2) is a small non-enveloped DNA virus that causes swine immunosuppression by inducing apoptosis in lymphocytes. The ORF3 protein plays a major role in PCV2-induced apoptosis in porcine kidney cells, but there is little information regarding this protein in PCV2-infected lymphocytes. In this study, hybridoma screening and epitope mapping were determined by using an indirect ELISA. The mAb 7D3 against ORF3 peptide (residues 35–65) of PCV2 were generated in this study. In vivo situation, the mAb 7D3 recognized ORF3 protein existed in PCV2-infected apoptotic porcine PBMCs. It is noteworthy that thimerosal interfered with the binding of mAb 7D3 to epitope and it was diminished by adding cysteine. Additionally, thimerosal interacting with cysteine-containing peptide was demonstrated by the PTI assay. Furthermore, thimerosal specifically interacted with the antigen-binding sites of mAb 7D3. This study suggested that thimerosal blockade the occlusion of the antigen-binding sites of mAb 7D3 to bind ORF3 peptide (residues 35–65) via thimerosal interacting with cysteine residues which should be located within the antigen-binding sites of mAb 7D3. Overall, the mAb 7D3 has been characterized and it will be a valuables tool in future studies of ORF3 function and the wider mechanism of cell apoptosis caused by PCV2 infection. Similarly, these techniques will be useful for applications in detecting thimerosal too.

With Unmanned Aerial Vehicles (UAV), a swift response to urgent needs like search \& rescue missions or medical deliveries can be realized. Simultaneously, the legislator is establishing so-called geographical zones, which restrict UAV operations to mitigate the air and ground risk to third parties. These geographical zones serve a particular safety interest, but they may also hinder the efficient usage of UAVs on time-critical missions with a range-limiting battery capacity. In this study, we address a facility location problem for up to two UAV hangars with a robust optimization model considering demand hotspots, geographical zones as restricted areas, a standard mission to satisfy battery capacity constraints, and the impact of wind scenarios. To this end, water rescue missions are used exemplary, for which positive and negative location factors for UAV hangars and areas of increased drowning risk as demand points are derived from open-source georeferenced data. Optimal UAV mission trajectories are computed with an A* algorithm considering five different restriction scenarios. As this pathfinding is very time-consuming, binary occupancy grids and image processing algorithms accelerate the computation by identifying either entirely inaccessible or restriction-free connections beforehand. For the optimal UAV hangar locations, we maximize accessibility while minimizing the service time to the hotspots, resulting in a decrease from the average service time of 570.4 s for all facility candidates to 351.1 s for one and 287.2 s for two optimal UAV hangar locations.

Barriers to inventing electronic devices involve challenges of iterating electronic designs due to long lead times for professional circuit board milling or high-costs of commercial milling machines. To overcome these barriers this study provides open source (OS) designs for a low-cost circuit milling machine. First, design modifications for mechanical and electrical sub-systems of the OS D3D Robotics prototyping system are provided. Next, Copper Carve, an OS custom graphical user interface, is developed to enable circuit board milling by implementing backlash and substrate distortion compensation. The performance of the OS D3D circuit mill is then quantified and validated for: positional accuracy, cut quality, feature accuracy and distortion compensation. Finally, the return on investment is calculated for inventors using it. The results show by properly compensating for motion inaccuracies with Copper Carve, the machine achieves a motion resolution of 10 microns, which is more than adequate for most circuit designs. The mill is at least five times less expensive than all commercial alternatives and the material costs of the D3D mill are repaid from fabricating 20-43 boards. The results show that the OS circuit mill is of high-enough quality to enable rapid invention and distributed manufacturing of complex products containing custom electronics.

The SARS (severe acute respiratory syndrome)-CoV (Coronavirus)-2 S(spike)-protein mRNA/cDNA currently being used as vaccines are antigenic but not antigens against SARS-CoV-2, that causes COVID (Coronavirus Disease) -19. Furthermore, the mRNA and cDNA antigenic vaccines also have potentials for homologous as well as heterologous recombination, primarily into the somatic cell DNA of the vaccine recipients. On the contrary, a SARS-CoV-2 RBD-protein antigen, a part of the S-protein, will directly stimulate antibody production against SARS-CoV-2. Hence, a vaccine composed of SARS-CoV-2 RBD-protein as a safer, fast acting, and effective vaccine against SARS-CoV-2 and thus against COVID-19. This is also useful for some immune compromised individuals.

In today's digital landscape, cybersecurity has become a priority, with attacks becoming increasingly sophisticated. Traditional security approaches are no longer enough, requiring a more dynamic and advanced response. In this context, integrating Artificial Intelligence (AI) and Machine Learning (ML) appears key to addressing this growing threat. However, despite their high effectiveness, there is a developed problem: the integration of various data sources and technologies for comprehensive protection. This article presents an in-depth review of integrating Artificial Intelligence and Machine Learning in cybersecurity, focusing particularly on Open Extended Detection and Response (Open XDR) technology. The literature review in this article was meticulously conducted with specific criteria in mind. It focused on sourcing peer-reviewed journals, authoritative cybersecurity publications, and recent conferences that primarily concentrate on the advancements in AI and ML within the cybersecurity domain, particularly from 2018 to 2023. This timeframe was chosen to ensure the inclusion of the most current and relevant developments in Open XDR technology, Intrusion Detection Systems, Endpoint Detection and Response, and Security Information and Event Management systems. Additionally, the review gave special attention to studies and reports highlighting practical implementations and real-world applications of these technologies, thereby ensuring a comprehensive understanding of their impact and effectiveness in enhancing cybersecurity resilience. The methodology used is a detailed literature review, examining how various cybersecurity components interact and function. These components include Intrusion Detection Systems (IDS), which monitor networks for malicious activities; Endpoint Detection and Response (EDR), which focuses on detecting and investigating security incidents on endpoints; and Security Information and Event Management (SIEM), systems that provide real-time analysis of security alerts. The review also considers the role of Active Directory, a directory service for Windows domain networks, and the process of log forwarding, where log files are transmitted to a central server for analysis, in the context of AI and ML. The paper delves into the development of AI and ML, underscoring their roles in cybersecurity for advanced data processing, pattern recognition, and predicting threats. It explores both supervised (where the model is trained on labeled data) and unsupervised learning (where the model learns from unlabeled data) in ML, and how these techniques bolster cybersecurity measures. The article highlights the significance of Open XDR as a critical innovation that integrates data from multiple sources for comprehensive security analysis. Further, the review discusses how the integration of AI and ML into various cybersecurity tools, such as IDS, EDR, and SIEM, augments capabilities in threat detection and response. It addresses the challenges and opportunities that AI and ML present in the cybersecurity domain, focusing on ethical issues, data privacy concerns, and the necessity for ongoing professional development in this rapidly advancing field. The paper concludes by affirming the effectiveness of merging AI and ML with these cybersecurity tools within the Open XDR framework.

A controlled ammonia (NH₃) release experiment was performed at a grassland site to quantify the effect of dry deposition, at the field scale between the source and the receptors (NH₃ measurement locations), on the estimates of emission rates by means of inverse dispersion modelling. NH₃ was released for 3 hours at a constant rate of Q = 6.29 mg s⁻¹ from a grid of 36 orifices spread over an area of 250 m². The increase in line-integrated NH₃ concentration was measured with open-path optical miniDOAS devices at different locations downwind of the artificial source. Using a backward Lagrangian stochastic (bLS) dispersion model (bLSmodelR), the fraction of the modelled release rate to the emitted NH₃ (Q_bLS/Q) was calculated from the measurements of the individual instruments. Q_bLS/Q was found to be systematically lower than 1, on average between 0.69 and 0.91, depending on the location of the receptor. We hypothesized that NH₃ dry deposition to grass and soil surfaces was the main factor responsible for the observed depletion of NH₃ between source and receptor. A dry deposition algorithm based on a deposition velocity approach was included in the bLS modelling. Model deposition velocities were evaluated from a ‘big‑leaf’ canopy resistance analogy. Canopy resistances (generally termed Rc) that provided Q_bLS/Q = 1 ranged from 75 to 290 s m⁻¹, showing that surface removal of NH₃ by dry deposition can plausibly explain the original underestimation of Q_bLS/Q. The inclusion of a dry deposition process in dispersion modelling is crucial for emission estimates, which are based on concentration measurements of depositing tracers downwind of homogeneous area sources or heterogeneously distributed hot spots, such as e.g. urine patches on pastures in the case of NH₃.

This report describes the experience in implementing the FAIR principles for the GoTriple Discovery Platform for the Social Sciences and Humanities (SSH). It shows how adherence to FAIR should be considered as a continuous process throughout the entire lifespan of any information management system, including GoTriple, rather than a static goal with decisions only made at design time. The report presents an introduction highlighting the importance of the FAIR principles, indicating how they can be assessed in data management systems. Then the GoTriple case is presented, with a general overview of this discovery platform before describing some of the implemented practices in support of FAIR. The Discussion section shows on the one hand some virtuous reuse of GoTriple data, together with one major pitfall in the platform’s FAIR implementation. In this sense, this report serves as a case study that can offer insights and actionable advice for those implementing information systems aligned, from the very outset, with the FAIR principles.

Mountain and pastoralist societies around the world have for centuries sustained their livelihoods and cultures by accumulating specialist knowledge about their local and regional socio-ecological environments. Developing traditional knowledge and customary practices takes time, sometimes spanning across generations. As macro-level changes to social and natural environment are now taking place, such as globalization and climate change, local communities could potentially also benefit from complementary, suitably adapted educational opportunities for sustainable development. However, access to education has often required moving to urban centres, which can weaken community structures and cohesion, and could also foster increased dependence on external specialists, providers or decision-makers. Careful introduction of emerging Educational Technologies could alleviate and possibly reverse such trends as mobile Internet access spreads to remote areas. This paper examines the role of education in sustainable development and specifically explores the potential for two educational innovations, open badges and blockchain, to provide a new construct for transformation in sustainable development amongst mountain and pastoralist societies. These technologies could not only facilitate education through online distance learning, but also allow geographically remote populations to highlight the value of their traditional knowledge and to engage more comprehensively in their changing worlds.

A low-cost data logging platform is presented for environmental monitoring projects that provides long-term operation in remote or submerged environments. Three premade “breakout boards” from the open-source Arduino ecosystem are assembled into the core of the platform. The components are selected based on low-cost and ready availability, making the loggers easy to build and modify without specialized tools, or a significant background in electronics. Power optimization techniques are explained. The platform has proven to be highly reliable, and capable of operating for more than a year on standard AA batteries. The flexibility of the system is illustrated with two ongoing field studies recording drip rates in a cave, and water flow in a flooded cave system.

Transportation of goods is as old as human civilizations : past networks and their evolution shed light on long term trends. Transportation impact on climate change is measured as major, as well as the impact on spreading a pandemic. These two reasons motivate the importance of providing relevant and reliable historical geographic datasets of these networks. This paper focuses on reconstructing the railway network in France at its maximal extent, a century ago. The active stations and lines are well documented by the French SNCF, in open public data. However, that information ignores past stations (ante 1980), which represent probably more than what is recorded in public data. Additional open data, individual or collaborative (eg. Wikipedia) are particularly valuable, but they are not always geo-coded, and two more sources are necessary to completing that geo-coding: ancient maps and aerial photography. Therefore, remote sensing and volunteer geographic information are the two pillars of past railway reconstruction. The methods developed are adapted to the extraction of information from these sources: automated parsing of Wikipedia Infoboxes, data extraction from simple tables, even from simple text. That series of sparse procedures can be merged into a comprehensive computer-assisted process. Beyond this, a huge effort in quality control is necessary when merging these data: automated wherever possible, or finally visually controlled by observation of remote sensing information. The main output is a reliable dataset, under ODbl, of more than 9100 stations, which can be combined with the information about the 35000 communes of France, for a large variety of studies. This work demonstrates two thesis: (a) it is possible to reconstruct transport network data from the past, and generic computer assisted methods can be developed; (b) the value of remote sensing and volunteered geo info is considerable (what archeologists already know).

A surgical technique aimed at rerouting aqueous humor (AH) outflow from the anterior chamber to the suprachoroidal space (SCS) without performing surgical cyclodialysis was developed to decrease intraocular pressure (IOP) in glaucoma patients. The surgical outcomes of the technique were retrospectively analyzed in fifty-eight patients. At 6, 12, and 24 months, the mean IOP decreased from 27.8±8.3 to 14.95.0 mmHg, median 15.0 (25th percentile (p25 )13.0; 75th percentile (p75) 18.0), and 15.23.3 mmHg; hypotensive medication use reduced from median (p25; p75) 3 (2; 3) to 0 (0; 2), 0 (0; 2), and 0 (0; 1.5), and complete success was achieved in 62.8%, 51.2%, and 32.5% cases, with partial success in 28.4%, 44.2%, and 62.5% cases, respectively. Eight cases (13.8%) presented unsatisfactory outcomes. Intra- and postoperative complications were few and manageable. No bleb formation was observed in any of the cases. In 50% of cases, conjunctival lymphatic vessels (CLVs) developed following surgery in superior quadrants. The technique is safe and effective in providing a long-term decrease in IOP and hypotensive medication use. It was hypothesized in this study that the IOP decrease occurred as a result of enhanced AH outflow from the SCS to CLVs through intrascleral microchannels connecting the SCS to CLVs.

In a recent paper, Nicolas Gisin suggests that by conducting physics with intuitionistic rather than classical mathematics, rich temporality - that is, passage and tense, and specifically, the future’s openness - can be incorporated into physics. Physics based on classical mathematics is tenseless and deterministic, and that, so he holds, renders it incongruent with experience. According to Gisin, physics ought to represent the indeterminate nature of reality, and he proposes that intuitionistic mathematics is the key to succeeding in doing so. While I share his insistence on the reality of passage and tense, and on the future being real and open, I argue that the amendment he offers does not work. I show that, its attunement to time notwithstanding, intuitionistic mathematics is as tenseless as classical mathematics, and that physics is bound to remain tenseless regardless of the math it employs. There is much to learn about tensed time, but the task belongs to phenomenology and not to physics.

The goal of the manuscript is to design a relatively best control structure for the noise suppression of a drone’s camera gimbal action. The gimbal’s movement can be simplified as a rest-to-rest reorientation system that can achieve the boundary result of a dynamic system. Six different control architectures are proposed and evaluated based on their ability to control the trajectory of the dynamic-system position and speed, their running time, and quadratic cost. The robustness of the control architecture to uncertainties in inertia and sensor noise is also analyzed. Monte Carlo figures are used to assess the performance of the six control systems. The conditions for applying different architectures are identified through this analysis. The analysis and experimental tests reveal the most suitable control of the drone’s camera gimbal rotation.

The increasing complexity of the design and operation evaluation process of multi-energy grids (MEGs) requires tools for the coupled simulation of power, gas and district heating grids. Most tools analyzed in this paper either do not allow coupling of infrastructures, simplify the grid model or are not publicly available. We introduce the open source piping grid simulation tool pandapipes that – in interaction with pandapower - fulfills three crucial criteria: clear data structure, adaptable MEG model setup and performance. In an introduction to pandapipes we illustrate how it fulfills these criteria through its internal structure and demonstrate how it performs in comparison to STANET®. Then we show two case studies that have been performed with pandapipes already. The first case study demonstrates a peak shaving strategy as interaction of a local electricity and district heating grid in a small settlement. The second case study analyzes the potential of a power-to-gas device to serve as flexibility in a power grid under consideration of gas grid constraints. They both show the importance of a clear database, a simple simulation setup and good performance to set up different large and complex studies on grid infrastructure design and operation.

In Data Science we are concerned with the integration of relevant sciences in observed and empirical contexts. This results in the unification of analytical methodologies, and of observed and empirical data contexts. Given the dynamic nature of convergence, described are the origins and many evolutions of the Data Science theme. The following are covered in this article: the rapidly growing post-graduate university course provisioning for Data Science; a preliminary study of employability requirements, and how past eminent work in the social sciences and other areas, certainly mathematics, can be of immediate and direct relevance and benefit for innovative methodology, and for facing and addressing the ethical aspect of Big Data analytics, relating to data aggregation and scale effects. Associated also with Data Science is how direct and indirect outcomes and consequences of Data Science include decision support and policy making, and both qualitative as well as quantitative outcomes. For such reasons, the importance is noted of how Data Science builds collaboratively on other domains, potentially with innovative methodologies and practice. Further sections point towards some of the most major current research issues.

The reversible computation paradigm aims to provide a new foundation for general classical digital computing that is capable of circumventing the thermodynamic limits to the energy efficiency of the conventional, non-reversible paradigm. However, to date, the essential rationale for and analysis of classical reversible computing (RC) has not yet been expressed in terms that leverage the modern formal methods of non-equilibrium quantum thermodynamics (NEQT). In this paper, we begin developing an NEQT-based foundation for the physics of reversible computing. We use the framework of Gorini-Kossakowski-Sudarshan-Lindblad dynamics (a.k.a. Lindbladians) with multiple asymptotic states, incorporating recent results from resource theory, full counting statistics, and stochastic thermodynamics. Important conclusions include that, as expected: (1) Landauer's Principle indeed sets a strict lower bound on entropy generation in traditional non-reversible architectures for deterministic computing machines when we account for the loss of correlations; and (2) implementations of the alternative reversible computation paradigm can potentially avoid such losses, and thereby circumvent the Landauer limit, potentially allowing the efficiency of future digital computing technologies to continue improving indefinitely. We also outline a research plan for identifying the fundamental minimum energy dissipation of reversible computing machines as a function of speed.

We introduce linear probing hashing schemes that construct a hash table of size $n$, with constant load factor $\alpha$, on which the worst-case unsuccessful search time is asymptotically almost surely $O(\log \log n)$. The schemes employ two linear probe sequences to find empty cells for the keys. Matching lower bounds on the maximum cluster size produced by any algorithm that uses two linear probe sequences are obtained as well.

Identifying macroeconomic events that are responsible for dramatic changes of economy is of particular relevance to understand the overall economic dynamics. We introduce an open-source available efficient Python implementation of a Bayesian multi-trend change point analysis which solves significant memory and computing time limitations to extract crisis information from a correlation metric. Therefore, we focus on the recently investigated S&P500 mean market correlation in a period of roughly 20 years that includes the dot-com bubble, the global financial crisis and the Euro crisis. The analysis is performed two-fold: first, in retrospect on the whole dataset and second, in an on-line adaptive manner in pre-crisis segments. The on-line sensitivity horizon is roughly determined to be 80 up to 100 trading days after a crisis onset. A detailed comparison to global economic events supports the interpretation of the mean market correlation as an informative macroeconomic measure by a rather good agreement of change point distributions and major crisis events. Furthermore, the results hint to the importance of the U.S. housing bubble as trigger of the global financial crisis, provide new evidence for the general reasoning of locally (meta)stable economic states and could work as a comparative impact rating of specific economic events.

Chatbots have gained widespread popularity for their task automation capabilities and consistent availability in various domains, including education. However, their ability to adapt to the continuously evolving and dynamic nature of knowledge is limited. This research investigates the implementation of an internet wizard to enhance the knowledge base of an open-domain question-answering chatbot. The proposed approach leverages search engines, particularly Google, and its features, including feature snippets, knowledge graph, and organic search, in conjunction with data science and natural language models. This mechanism empowers the chatbot to dynamically access the extensive and up-to-date knowledge available on the web, enabling the provision of real-time and pertinent answers to user queries sourced from web documents. A pilot study in a higher education context evaluated the chatbot's mechanism and features, confirming its proficiency in generating responses across a broad range of educational and non-educational topics. Positive feedback and high user satisfaction validate these findings. Notably, the chatbot's dynamic feature of retrieving related or follow-up questions from search engines significantly enhances student engagement and facilitates exploration of supplementary information beyond the curriculum.

The human mind is multimodal. Yet most behavioral studies rely on century-old measures of behavior—task accuracy and latency (response time). Multimodal and multisensory analysis of human behavior creates a better understanding of how the mind works. The problem is that designing and implementing these experiments is technically complex and costly. This paper introduces versatile and economical means of developing multimodal-multisensory human experiments. We provide an experimental design framework that automatically integrates and synchronizes measures including electroencephalogram (EEG), galvanic skin response (GSR), eye-tracking, virtual reality (VR), body movement, mouse/cursor motion and response time. Unlike proprietary systems (e.g., iMotions), our system is free and open-source; it integrates PsychoPy, Unity and Lab Streaming Layer (LSL). The system embeds LSL inside PsychoPy/Unity for the synchronization of multiple sensory signals—gaze motion, electroencephalogram (EEG), galvanic skin response (GSR), mouse/cursor movement, and body motion—with low-cost consumer-grade devices in a simple behavioral task designed by PsychoPy and a virtual reality environment designed by Unity. This tutorial shows a step-by-step process by which a complex multimodal-multisensory experiment can be designed and implemented in a few hours. When conducting the experiment, all of the data synchronization and recoding of the data to disk will be done automatically.

Recently, due to the miniaturization of electronic products, printed circuit boards (PCBs) have also become smaller. This trend has led to the need for high-precision electrical test equipment to check PCBs for disconnections and short circuits. The purpose of this study is to improve the position repeatability of the platform unit up to ±2.5 μm in a linear stage type test equipment. For this purpose, the causes of position errors of the platform unit are analyzed. The platform unit holding the PCB is driven by a single-axis linear ball screw drive system offset from its geometric center due to design constraints. The yaw rotation of the platform is found to have a dominant effect on position repeatability. To address this problem, the methods of adding balancing weights to the platform unit and adjusting the stiffness of LM Guides are proposed. This reduces the yaw rotation by moving the centers of mass and stiffness closer to the linear ball screw actuator. In the verification tests, the position repeatability was decreased to less than ±1.0 μm.

Many academics are critical of the current publishing system, but it is difficult to create a better alternative. This review relates to the Sciences and Social Sciences, and discusses the primary purpose of academic journals as providing a seal of approval for perceived quality, impact, significance, and importance. The key issues considered include the role of anonymous refereeing, continuous rather than discrete frequency of publications, avoidance of time wasting, and seeking adventure. Here we give recommendations about the organization of journal articles, the roles of associate editors and referees, measuring the time frame for refereeing submitted articles in days and weeks rather than months and years, encouraging open access internet publishing, emphasizing the continuity of publishing online, academic publishing as a continuous dynamic process, and how to improve research after publication. Citations and functions thereof, such as the journal impact factor and h-index, are the benchmark for evaluating the importance and impact of academic journals and published articles. Even in the very top journals, a high proportion of published articles are never cited, not even by the authors themselves. Top journal publications do not guarantee that published articles will make significant contributions, or that they will ever be highly cited. The COVID-19 world should encourage academics worldwide not only to rethink academic teaching, but also to re-evaluate key issues associated with academic journal publishing in the future.

In this work, we introduce the concepts of r-fuzzy soft δ-open (resp. semi-open and α-open) sets on fuzzy soft topological space, the relations of these sets with each other are established. Next, we introduce the concepts of fuzzy soft δ-continuous (resp. β-continuous, semi-continuous, pre-continuous and α-continuous) functions, and some properties of these functions along with their mutual relationships are investigated. Also, a decomposition of fuzzy soft semi-continuity and a decomposition of fuzzy soft α-continuity are given. Finally, as a weaker form of fuzzy soft continuity by Aygunoglu et al. (2014), the concepts of fuzzy soft almost (resp. weakly) continuous functions are introduced, and some properties are specified. Moreover, we explore the notion of continuity in a very general setting namely fuzzy soft (L, M, N, O)-continuous functions, and a historical justification are obtained.

Abstract: This review addresses the complexities of type 1 diabetes (T1D)and its associated complications, with a par-ticular focus on diabetic retinopathy (DR). This review outlines the progression from non-proliferative to proliferative diabetic retinopathy and diabetic macular edema, highlighting the role of dysglycemia in the pathogenesis of these conditions. A significant portion of the review is devoted to technological advances in diabetes management, particu-larly the use of Hybrid Closed Loop systems (HCLS) and to the potential of open-source HCLS systems, which could be easily adapted to different patiens’needs using big data analytics and machine learning. Personalized HCLS algorithms that integrate factors such as patient lifestyle, dietary habits, and hormonal variations are highlighted as critical to reducing the incidence of diabetes-related complications and improving patient outcomes.

Autonomous navigation of spacecraft necessitates innovative technologies, methods, and algorithms, particularly when orbiting in proximity of other space objects. Optimization methods are useful for autonomous spacecraft navigation, guidance, and control, but their performance is hampered by noisy multi-sensor technologies and poorly modeled system equations, and real-time on-board utilization is generally computationally burdensome. Some proposed methods use noisy sensor data to learn the optimal guidance and control solutions real-time (online), where non-iterative instantiations are preferred to reduce computational burdens. This study aims to highlight efficacy and limitations of several common methods for optimizing guidance and control while proposing a few more, where all methods are applied to the full, nonlinear, coupled equations of motion including cross-products of motion from the transport theorem. Five disparate types of optimum guidance and control algorithms are presented and compared to a classical benchmark. Comparative analysis is based on tracking errors (both states and rates), fuel usage, and computational burden. Real-time optimalization with singular switching plus nonlinear transport theorem decoupling proves superior by matching open-loop solutions to the constrained optimization problem (in terms of state and rate errors and fuel usage), while robustness is validated in the utilization of mixed, noisy state and rate sensors and uniformly varying mass and mass moments of inertia. State tracking errors are reduced one-hundred ten percent. Rate tracking errors are reduced one-hundred thirteen percent. Control utilization (e.g., fuel) is reduced eighty four percent, while computational burden in reduced ten percent simultaneously.

In this manuscript, we first introduce some properties of r-fuzzy soft α-open sets in fuzzy soft topological spaces based on the manuscript Aygunoglu et al. (Hacet. J. Math. Stat. 2014, 43, 193-208). In addition, we define the concepts of fuzzy soft α-closure (α-interior) operators, and investigate some properties of them. Furthermore, the concept of r-fuzzy soft α-connected sets is defined and characterized with help of fuzzy soft α-closure operators. Thereafter, we introduce and study the concepts of fuzzy soft almost (weakly) α-continuous mappings, which are weaker forms of fuzzy soft α-continuous mappings, and we discuss some properties of fuzzy soft α-continuity. Moreover, we establish that fuzzy soft α-continuity → fuzzy soft almost α-continuity → fuzzy soft weakly α-continuity, but the converse may not be true. It is also we show that the composition is fuzzy soft almost α-continuous mapping if, is fuzzy soft α-continuous mapping and is fuzzy soft almost continuous mapping. Finally, some new types of compactness via r-fuzzy soft α-open sets are defined, and the relationships between them are examined.

Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Fundamental science and applied research and technology development (RTD) are facing significant challenges that particularly compound to the notorious credibility, reproducibility, funding and sustainability crises. The underlying, serious shortcomings are substantially amplified by a metrics-obsessed publication culture, and a growing cohort of academics fishing for fairly stagnant (public) funding budgets. This work presents, for the first time, a groundbreaking strategy to successfully address these severe issues; the novel strategy proposed here leverages the distributed ledger technology (DLT) “blockchain” to capitalize on cryptoeconomic mechanisms, such as tokenization, consensus, crowdsourcing, smart contracts, reputation systems as well as staking, reward and slashing mechanisms. This powerful toolbox, which is so far widely unfamiliar to traditional scientific and RTD communities (“TradSci”), is synergistically combined with the exponentially growing computing capabilities for virtualizing experiments through digital twin methods in a future scientific “metaverse”. Project contributions, such as hypotheses, methods, experimental data, modelling, simulation, assessment, predictions and directions are crowdsourced using blockchain, and captured by so-called non-fungible tokens (“NFTs”). The so enabled, highly integrative approach, termed decentralized science (“DeSci”), is destined to move research out of its present silos, and to markedly enhance quality, credibility, efficiency, transparency, inclusiveness, sustainability, impact, and sustainability of a wide spectrum of academic and commercial research initiatives.

This paper presents MADS (Multi-Agents for Data Science), an innovative and simple open-source multi-agent framework designed for systemic pipeline execution in applied supervised machine learning. By leveraging the capabilities of multi-agent systems (MAS), we introduce a universal approach to optimize and streamline machine learning pipelines. Our framework highlights the differences between various types of agents, such as reinforcement learning (RL) agents and large language model (LLM) agents, and their distinct contributions to the process. While we currently employ LLM agents to automate and enhance machine learning tasks, we acknowledge the potential of incorporating RL agents in future iterations to further improve performance and adaptability. The primary objective is to enhance the efficiency, scalability, and adaptability of supervised learning applications across various domains. This integration addresses the complexity and manual effort typically associated with machine learning workflows, paving the way for more automated, robust, and scalable solutions. Our approach demonstrates significant improvements in task automation, reduced human intervention, and enhanced model performance. The MADS framework, which will soon be available as an open-source implementation, represents a pivotal contribution to the field of machine learning, promising to facilitate broader adoption and collaborative advancement.