Background Increasingly, healthcare organizations are using technology for the efficient management of data. The aim of this study was to compare the data quality of digital records with the quality of the corresponding paper-based records by using data quality assessment framework. Methodology We conducted a desk review of paper-based and digital records over the study duration from April 2016 to July 2016 at six enrolled TB clinics. We input all data fields of the patient treatment (TB01) card into a spreadsheet-based template to undertake a field-to-field comparison of the shared fields between TB01 and digital data. Findings A total of 117 TB01 cards were prepared at six enrolled sites, whereas just 50% of the records (n=59; 59 out of 117 TB01 cards) were digitized. There were 1,239 comparable data fields, out of which 65% (n=803) were correctly matched between paper based and digital records. However, 35% of the data fields (n=436) had anomalies, either in paper-based records or in digital records. 1.9 data quality issues were calculated per digital patient record, whereas it was 2.1 issues per record for paper-based record. Based on the analysis of valid data quality issues, it was found that there were more data quality issues in paper-based records (n=123) than in digital records (n=110). Conclusion There were fewer data quality issues in digital records as compared to the corresponding paper-based records. Greater use of mobile data capture and continued use of the data quality assessment framework can deliver more meaningful information for decision making.

Traffic source emissions inventories for the rapidly growing West African urban cities are necessary for better local characterization of vehicle emissions released into these cities atmosphere. This study based on local field campaign in a representative site of anthropogenic activities over West African cities such as Yopougon (Abidjan, Côte d'Ivoire) during 2016, provided useful information on vehicle type and age, traveling time, fuel type and amount for fuel consumption estimation. Also, high traffic flow of personal car were recorded on highway, boulevard and backstreet whereas high flows of intra-communal sedan taxi are recorded on main and secondary roads. In addition, the highest daily fuel consumption value of 56 L.day^-1 was recorded in heavy vehicle while the lowest value of 15 L.day^-1 is recorded for personal car using gasoline. This study will be useful for the improvement of uncertainties related to the different databases used to estimate inventories emissions either national or international reports. This work provides useful information for future studies on urban air quality, climate and health impacts assessment in African cities. It may also be useful for policy makers to support implementation of emission reduction policy in West African cities.

This manuscript deals with the cavitation erosion resistance of low-velocity oxy-flame (LVOF) sprayed Al2O3–40%TiO2/NiMoAl cermet coatings, a new functional application of cermet coatings. The aim of the study was to investigate the cavitation erosion mechanism and determine the effect of feedstock powder ratio (Al2O3–TiO2/NiMoAl) of LOVF cermet coatings on their cavitation erosion resistance. As-sprayed coatings were investigated for roughness, porosity, hardness, Young’s modulus. Microstructural characteristics of the cross-section and the surface of as-sprayed coatings were examined by light optical microscopy (LOM) and scanning electron microscopy (SEM) equipped with the EDS and XRD methods. Coatings cavitation tests were conducted in accordance with the ASTM G32 standard with usage of reference samples made from steel, copper and aluminum alloys. Cavitation erosion resistance was measured by weight and volume loss, and normalised cavitation erosion resistance was calculated. Surface eroded due to cavitation was examined in successive time intervals by LOM and SEM-EDS. On the basis of coating properties and cavitation investigations, a phenomenological model of the cavitation erosion of Al2O3–40%TiO2/NiMoAl cermet coatings was elaborated. General relationships between their properties, microstructure and cavitation wear resistance were established. The Al2O3–40%TiO2/NiAlMo composite coating containing 80% of ceramic powder has a higher cavitation erosion resistance than the reference aluminium alloy.

Here we consider sums of finite products of Chebyshev polynomials of the third and fourth kinds. Then we represent each of those sums of finite products as linear combinations of the four kinds of Chebyshev polynomials which involve the hypergeometric function ₃F₂.

Running on a non-motorized, curved-deck treadmill is thought to improve gait mechanics. It is not known, though, if the change in gait carries over to running on a motorized treadmill or level ground. To determine the effect of running on a curved non-motorized treadmill (CNT) on gait characteristics measured during a subsequent bout of running on a traditional motorized treadmill (TMT). Sixteen healthy college-aged participants, age (mean±SD) 20.4±1.6 years volunteered to have their gait analyzed while running on a TMT and CNT. After familiarization and warm-up on both treadmills, each subject completed five, 4-minute bouts of running alternating between traditional motorized and curved non-motorized treadmills: TMT-1, CNT-1, TMT-2, CNT-2, and TMT-3. Variables of interest included step length (m), stride length (m), imbalance score (%), and step angle (°) and were measured using Optogait gait analysis equipment. Differences in gait char acteristics among TMT-1, TMT-2, and TMT-3 can be attributed to running on the CNT. The results show that running on a CNT resulted in significant changes in gait characteristics. These findings suggest that running on a CNT can significantly alter gait characteristics may result in improvements in running gait that persist to subsequent running on a TMT.

This research work deals with the modeling and control of hybrid photovoltaic (PV) - Wind micro-grid using Quasi Z-Source inverter. This inverter provides better buck/boost characteristics, able to regulate the phase angle output, less harmonic content, no requirement of the filter and has high power performance characteristics over conventional inverter as major benefits. A SEPIC converter as dc-dc switched power apparatus is employed for maximum power point tracking (MPPT) functions which provides high voltage gain throughout the process. Moreover, a modified power ratio variable step (MPRVS) based perturb & observe (P&O) method has been proposed in the PV MPPT action which forces the operating point close to maximum power point (MPP). Practical responses justify the performance of hybrid PV-Wind micro-grid with Quasi Z-Source inverter structure.

Excessive vibration of temporary grandstand owing to crowd has lateral rhythmic motions can cause human in panic, which attracted increasing attention in recent years. This paper focuses on experiments that a temporary grandstand occupied 20 participants is oscillated by a shaking table with a series of random waves and induced by crowd with rhythmic swaying motions at lateral direction, respectively. And then a series of vibration perception questionnaires about crowd reaction are obtained. Evaluation of annoying level derives in concept of degree of membership and annoying rate method is proposed, then the human health risk of vibration serviceability of temporary grandstand is assessed with acceleration vibration dose value(VDV). From these results it is clear that standing crowd is more tolerant to vibration than seated crowd. The measured vibrations generated by crowd activities on temporary grandstand can cause panic in crowd. New relationship between the annoyance rate and structural acceleration VDV at logarithmic coordinate is proposed. The findings of this study can be utilized to manage the vibration of temporary grandstand and assess the human health risk.

This study aims at an acoustic design of the classical concert hall and evaluation of the acoustic performance. In terms of three acoustic parameters (i.e., reverberation time (RT), clarity (C80), and lateral fraction (LF)), this study performed acoustic simulation modeling and site measurement with the K Art Hall located in South Korea as a case study. First, in order to meet the acoustic performance of the K Art Hall (target RT: 1.4~1.7 seconds, target C80: -2dB or more +2dB or less, and target LF: 10~35%), the finish materials and shape of the room as an interior acoustic design were determined. Second, the average values of the RT, C80, and LF using the acoustic simulation modeling were estimated at 1.4 second, 1.2~1.6 dB, and 29%, respectively. Third, the average values of the RT, C80, and LF through site measuring were measured at 1.5~1.64 second, 0.07~1.31dB, and 22.22~31.37%, respectively. Thus, the results of both the acoustic simulation modeling and site measuring were analyzed so as to satisfy the target acoustic performance. The results of this study will help the decision-makers (i.e., owner, construction managers, etc.) to plan the classical concert hall in terms of the RT, C80, and LF.

Hot rolling tests of a low-alloy steel were conducted at a rolling temperature of 850 ℃ under different lubrication conditions, including benchmarks (dry condition and water) and water-based nanolubricants containing different concentrations of nano-TiO₂ from 1.0 to 8.0 wt%. The effects of nanolubricants on rolling force, surface roughness, thickness of oxide scale and microstructure were systematically investigated through varying nano-TiO₂ concentrations. The results show that the application of nanolubricants can decrease the rolling force, surface roughness and oxide scale thickness of rolled steels, and refine ferrite grains. In particular, the nanolubricant containing an optimal concentration (4.0 wt%) of nano-TiO₂ demonstrates the best lubrication performance, owing to the synergistic effect of lubricating film, rolling, polishing and mending generated by nano-TiO₂.

Thermal infrared imagery provides temperature information on target objects, and has been widely applied in non-destructive testing. However, thermal infrared imagery is not always able to display detailed textures of inspected objects, which hampers the understanding of geometric entities consisting of temperature information. Although some commercial software has been developed for 3D thermal model displays, the software requires the use of expensive specific thermal infrared sensors. This study proposes a cost-effective method for 3D thermal model reconstruction based on image-based modeling. Two smart phones and a low-cost thermal infrared camera are employed to acquire visible images and thermal images, respectively, that are fused for 3D thermal model reconstruction. The experiment results demonstrate that the proposed method is able to effectively reconstruct a 3D thermal model which extremely approximates its corresponding entity. The total computation time for the 3D thermal model reconstruction is intensive while generating dense points required for the creation of a geometric entity. Future work will improve the efficiency of the proposed method in order to expand its potential applications to in-time monitoring.

Metal hydrides are one of the types of functional materials that allow safe and compact storage of a large amount of hydrogen, which is increasingly used today as an alternate fuel or energy source. The possibility of obtaining the initial energy necessary for the production of hydrogen by electrolysis process from renewable energy sources, such as solar panels and wind generators, makes hydrogen energetic quite attractive and rapidly developing industry sector. Solid form of hydrogen storage with the possibility of reversible sorption, gives opportunity for creation autonomous energy storage systems. La-Ni based alloys allow hydrogen storing at ambient temperatures and pressure not higher than 15 bar, which makes the application of these alloys quite practical, interesting and prospects for analysis and modifications on the ways of stored hydrogen capacity increasing, alloys price reducing and application for renewable energy storage.

Graph coloring is a manifestation of graph partitioning, wherein, a graph is partitioned based on the adjacency of its elements. Partitioning serves potentially as a compartmentalization for any structural problem. Vertex coloring is the heart of the problem which is to find the chromatic number of a graph. The fact that there is no general efficient solution to this problem that may work unequivocally for all graphs opens up the realistic scope for combinatorial optimization algorithms to be invoked. The algorithmic complexity of graph coloring is non-deterministic in polynomial time (NP) and hard. To the best of our knowledge, there is no algorithm as yet that procures an exact solution of the chromatic number comprehensively for any and all graphs within the polynomial (P) time domain. However, several heuristics as well as some approximation algorithms have been attempted to obtain an approximate solution for the same. Here, we present a novel heuristic, namely, the 'trailing path', which returns an approximate solution of the chromatic number within polynomial time, and, with a better accuracy than most existing algorithms. The ‘trailing path’ algorithm is effectively a subtle combination of the search patterns of two existing heuristics (DSATUR and Largest First), and, operates along a trailing path of consecutively connected nodes (and thereby effectively maps to the problem of finding spanning tree(s) of the graph) during the entire course of coloring, where essentially lies both the novelty and the apt of the current approach. The study also suggests that the judicious implementation of randomness is one of the keys towards rendering an improved accuracy in such combinatorial optimization algorithms. Apart from the algorithmic attributes, essential properties of graph partitioning in random and different structured networks have also been surveyed, followed by a comparative study. The study reveals the remarkable stability and absorptive property of chromatic number across a wide array of graphs. Finally, a case study is presented to demonstrate the potential use of graph coloring in protein design – yet another hard problem in structural and evolutionary biology.

Aiming to improve the flame retardancy performance of natural rubber (NR), we developed a novel flame retardant synergistic agent through grafting of MCM-41 to graphene oxide (GO)，named as GO-NH-MCM-41，as an assistant of intumescent flame retardants (IFR). The structure of GO-NH-MCM-41 was characterized by FTIR, TEM and SEM tests, which confirmed that a fine grafting had been applied between GO and MCM-41. The flame retardancy of NR/IFR/GO-NH-MCM-41 composites was evaluated by limited oxygen index (LOI), UL-94 and cone calorimeter test. The LOI value of NR/IFR/GO-NH-MCM-41 reached to 26.3%; the UL-94 ratings improved to V-0 rating. Moreover, the addition of GO-NH-MCM-41 obviously decreased the peak heat release rate (PHRR) and the total heat release (THR) of the natural rubber composites. And the addition of GO-NH-MCM-41 increased the thickness of char residue. The images of SEM indicated the char residue were more compact and continuous. The degradation of GO-NH-MCM-41 based NR composites completed with a mass loss of 35.57% at 600 ℃. The tensile strength and the elongation at break of NR/IFR/GO-NH-MCM-41 composites were 13.9 MPa and 496.7%, respectively. The results of rubber process analyzer (RPA) reached the maximum value, probably due to a better network of the fillers in the matrix.

The purpose of this study is to examine the self-esteem levels of visually handicapped individuals who do sports and do’t do sports. There were 106 sportsmen and 94 persons with visual handicapped (200 in total) who participated in the research clubs in the province of Izmir. As the sub-problems, the relationship between the genders of participant who visually handicapped and not visually handicapped was investigated. The study consists of two parts. In the first part, the demographic characteristics of the participants were determined; in the second part Rosenberg Self Value scale consisting of 10 questions was used. Data were analyzed with SPSS 18.00 package program. T test, correlation analysis, descriptive statistics were applied to test hypotheses of the study. The research found that there is a significant difference between the self-esteem levels of individuals with and without visually handicapped sports (P <0.05). No statistically significant difference was found between the self-esteem levels of the sportsmen and the sportswomen (P> 0,05). There was no significant difference in the self-esteem levels of visually handicapped individuals who played individual sports and team sports (P> 0,05). As a result, it has been seen that sports have a positive effect on self-esteem in visually handicapped individuals and they contribute and hold to life more meaningful.

The consumer’s acceptability of hamburgers elaborated with the flank of culling cows in which the content of salt or fat had been partially replaced was studied. A mixture of potassium chloride, potassium ferrocyanide and sodium ferrocyanide was used as substitutes for the salt. Oat flakes or a mixture of chia and flax seeds were used as substitutes for the fat. The hamburgers were tasted by 34 consumers. Consumers did not detect significant differences between the control and the rest of the formulations. Neither the gender nor the age of the consumers influenced the sensory appraisal. However, many comments regarding texture failures were recorded. Therefore, the substitution of salt and / or fat in the composition of hamburgers made with the flank of cows is a viable alternative for the commercialization of these pieces of low commercial value as long as the texture of the same is adjusted to resemble it to the control.

This study aimed to characterize the antioxidant, mechanical and physical properties of chicken skin gelatin/CMC/Centella asiatica blended film. The influence of Centella asiatica at 0.3% and 0.7% on antioxidant activities; mechanical properties and physical properties of chicken skin gelatin/CMC/Centella asiatica film were investigated. Characterization of the blended films with 0.7% Centella asiatica extract shows higher antioxidant activities with a total phenolic content of 0.36 mg/g of GAE, DPPH of 89.26%, and reducing power of 0.80 nm compared to 0.3% Centella asiatica extract. The addition of 0.3% of Centella extract provide higher value in tensile strength (5.0 × 10⁻² MPa), elongation at break (281%), melting point (131.31 °C), transparency (0.86) but lower UV-light penetration. While the addition of 0.7% Centella extract contribute to higher value in WVP (1.13 × 10⁻⁴ g m⁻¹s⁻¹Pa⁻¹) and puncture test (0.06 N). There are no significant differences between functional groups obtained from this blended film as evaluated by FTIR analysis (p > 0.05). Furthermore, XRD analysis showed the addition of extract decrease the crystallinity of film. In conclusion, the incorporation of Centella asiatica extracts on film greatly increased antioxidant levels and improved some of the mechanical and physical properties of the film blends.

The study proposes laser shock peening without a coating of high strength ultrafine bainitic steel to mitigating the fatigue failures for automotive and structural engineering applications. Laser pulse density of 2500 pulses/cm2 (75% overlapping) was optimised based on the induced residual stresses for employing the wide range of characterisations. The roughness and topographic results showed that surface roughening was controlled by tuning the laser pulse density. The High-Resolution X-ray Diffraction analysis confirmed the lattice misorientation resulting peak shift and the trend towards martensite phase transformations. The electron microscopic micro/nanostructure analyses revealed the grain refinement features such as nano-twins, micro shear bands and shear cells. The work hardening depth and nanomechanical properties were significantly enhanced. A fully reversed (R= -1) high-cycle fatigue tests extended the lifespan by an average of fifteen times than the untreated. Also, it has potential to repair the structural components effectively.

The difference of smoker’s topography has been found to be a function of sex, personality, nicotine yield, cigarette type (i.e., flavored versus non-flavored) ethnicity and etc. We evaluated the puffing behaviors of Korean smokers and its association with smoking-related biomarker levels. A sample of 300 participants was randomly recruited from metropolitan areas, South Korea. Topography measures during a 24-hour period were obtained using a CReSS pocket device. Korean male smokers smoked two puffs less per cigarette, compared to female smokers [15.0 (13.0–19.0) vs. 17.5 (15.0–21.0) as median (Interquartile range)], but had a significantly larger puff volume [62.7 (52.7–75.5) mL vs. 53.5 (42.0–64.2) mL); p = 0.012]. The interpuff interval was similar between men and women [8.9 (6.5–11.2) s vs. 8.3 (6.2–11.0) s; p = 0.122] but much shorter than other study results. A dose-response association (p = 0.0011) was observed between daily total puff volumes and urinary cotinine concentrations, after controlling for sex, age, household income level, nicotine addiction level. Understanding of the difference of topography measures, especially, larger puff volume and shorter interpuff interval of Korean smokers may help to overcome potential underestimation of internal dose of hazardous substitutes of smoking or corresponding its health effect.

Dental caries is a public health problem worldwide according to WHO data. Among treatments in pediatric dentistry, prefabricated metal crowns (PMCs) have been one of the most successful options since they were introduced in cases of considerable tooth destruction. Our objective was to detect the presence and concentration of iron (Fe), chromium (Cr), and nickel (Ni) in saliva of patients who require rehabilitation with PMCs, before and after their placement. A quasi-experimental study was performed in 32 patients who attended dental care in a pediatric dentistry clinic at a public university and who required rehabilitation with PMCs. Parametric tests (ANOVA and Pearson correlation) were performed, and a p ≤ 0.05 was considered statistically significant. Statistically significant differences were found when comparing the Ni release before, 1 week, and 1 month after placing the crowns. Similarly, we observed a positive correlation between the number of crowns and Ni release. No tests were performed for Fe and Cr because the amounts of these metals were less than 0.1 ppb, which was not detectable by inductively coupled plasma optical emission spectrometry (ICP-OES). The levels of Fe, Cr, and Ni released were below toxic health levels. Studies are required to evaluate whether this release has negative effects at cellular levels.

High electricity demand for consumption at current supply level in Indonesia led to the rising cost of electricity bills. This factor is compounded by the fact that many electric generators in Indonesia still use fossil fuels, which contributes to the high basic generation cost. UBL is one of the universities that aim to be a green campus. Our research explores the possibility of installing motion sensor to contribute on the energy efficiency. Although mostly common in developed countries, the use of motion sensor for energy efficiency is still rare, especially in Indonesia. despite rising cost and supply shortages, Indonesian buildings are still of high energy consumption. our experiment shows that simple installation of commercially available motion sensors can contribute to reduce the electricity bill from the increase of energy efficiency. One of the efforts to lower energy demand in consumer side is to use the electricity efficiently, such as turning off lights in a room when it's not in use. This method can be simply done by turning the light switches for office and classrooms, but difficult to do in public spaces such as toilets and corridors. Our experiment shows that simple installation of commercially available motion sensors can contribute to reduce the electricity bill from the increase of energy efficiency. Automatic light switches experimentally installed in sample toilet room prove that electricity consumption from the lamps can contribute to the reduction of total weekly energy that translates into Green House Gas emission reduction.

In the extra-thick coal seams and multi-layered hard roofs, the longwall hydraulic support yielding, coal face spalling, strong deformations of goaf-side entry, and severe ground pressure dynamic events typically occur at the longwall top coal caving longwall faces. Based on the Key strata theory an overburden caving model is proposed here to predict the multilayered hard strata behaviour. The proposed model together with the measured stress changes in coal seam and underground observations in Tongxin coal mine provides a new idea to analyse stress changes in coal and help to minimise rock bursts in the multi-layered hard rock ground. Using the proposed primary Key and the sub-Key strata units the model predicts the formation and instability of the overlying strata that leads to abrupt dynamic changes to the surrounding rock stress. The data obtained from the vertical stress monitoring in the 38 m wide coal pillar located adjacent to the longwall face indicates that the Key strata layers have a significant influence on ground behaviour. Sudden dynamically driven unloading of strata was caused by the first caving of the sub-Key strata while reloading of the vertical stress occurred when the goaf overhang of the sub-Key strata failed. Based on this findings several measures were recommended to minimise the undesirable dynamic occurrences including pre-split of the hard Key strata by blasting and using the energy consumption yielding reinforcement to support the damage prone gate road areas. Use of the numerical modelling simulations was suggested to improve the key theory accuracy.

Species data of 249 National Nature Reserves in China was used to identify potential underlying drivers of latitudinal gradients in plant diversity. We used generalized linear models (GLMs) to assess the correlations between predictor and response variables. We also used SAM (Spatial Analysis in Macroecology) to eliminate autocorrelation along each of the 249 studied locations. We used the Akaike information criterion (AICc; Montoya et al. 2007) to select the independent variables were those included in the best models from different combinations of climate, habitat and animal variables. Variance partitioning was used to decompose the variation in plant richness across different taxonomic levels among the three groups of predictors. We found that: Total plant species, gymnosperms, angiosperms and ferns showed significant latitudinal trends in richness (p < 0.001). Water-energy and habitat variables generally explained more variation in richness across different plant groups than did animal richness. Annual precipitation was selected as the best water-energy variable across different taxonomic plants groups, soil PH and elevation range were selected as the best habitat variables across different taxonomic plant groups. The independent effects of habitatvariables were higher than that of water-energy and animal variables across different taxonomic plants groups. Water-energy, habitat heterogeneity, and animal variables explain 48.8% of the variation in total species richness, 28.2% in gymnosperm richness, 44.2% in angiosperm richness, and 38.9% in fern richness.Plants showed significant latitudinal trends in richness (p < 0.001). Water-energy and habitat variables generally explained more variation in richness across different taxonomic plants groups than did animal variables. The independent effects of habitat variables were higher than those of water-energy and animal variables across different taxonomic plants groups.

Precipitation and human activities are two essential forcing dynamics that influence hydrological processes. To investigate those impacts, the Zuli River Basin (ZRB, a typical tributary basin of the Yellow River in China) was chosen to identify the impact of precipitation and human activities on runoff and sediment discharge. A double mass curve (DMC) analysis and the test methods, including accumulated variance analysis, sequential cluster, Lee-Heghnian, and moving t-test methods was utilized to determine the abrupt change point based on data from 1956 to 2015. Correlation formulas and multiple regression methods were used to calculate the runoff and sediment discharge reduction effects of soil conservation measures and to estimate the contribution rate of precipitation and soil conservation measures to runoff and sediment discharge. Our results show that the runoff reduction effect of soil conservation measures (45%) is greater than the sediment discharge reduction effect (32%). Soil conservation measures were the main factor controlling the 74.5% and 75.0% decrease in runoff and sediment discharge, respectively. Additionally, the contribution rate of vegetation measures was higher than that of engineering measures. This study provides scientific strategies for water resource management and soil conservation planning at catchment scale to face future hydrological variability.

Degradation of environment quality is currently the prime cause of the recent occurrence of natural disasters; it also contributes in the increase of the area that is prone to natural disasters. This research is aimed to map the potential of areas around Pesanggrahan river in DKI Jakarta by segmenting the Digital Elevation Model derived from LIDAR data. The objective of this segmentation is to find the watershed lines of the DEM image. Data processing in this research is using LIDAR data which take the ground surface data, which is overlaid with Jakarta river map and subsequently, the data is then segmented the image. The expected result of the research is the flood potential area information, especially along the Pesanggrahan river in South Jakarta.

Background: Variations in several clopidogrel-pharmacogenes have been linked to clopidogrel response variability and clinical outcomes. We aimed to determine the frequency distribution of major polymorphisms on CYP2C19, PON1, ABCB1 and P2RY12 pharmacogenes in Puerto Ricans. Methods: This was a cross-sectional, population-based study of 200 unrelated “Guthrie” cards specimens from newborns registered in the Puerto Rican Newborn Screening program (PRNSP) between 2004 and 2014. Taqman® SNP assay techniques were used for genotyping. Results: Minor Allele Frequencies (MAF) were 46% for PON1 (rs662), 41% for ABCB1 (rs1045642), 14% for CYP2C19*17, 13% for CYP2C19*2, 12% for P2RY12-H2 and 0.3% for CYP2C19*4. No carriers of the CYP2C19*3 variants were detected. All alleles and genotype proportions were found to be in Hardy-Weinberg equilibrium (HWE). Overall, there were no significant differences between MAFs of these variants in Puerto Ricans and the general population (n=453) of the 1,000 Genome project, except for the Yoruba in Ibadan from Nigeria (YRI, West-African ancestry; p<0.05). As expected, the prevalence of these markers in Puerto Ricans most resembled those in the 181 subjects from reference populations of the Americas. Conclusions: These prevalence data provide a necessary groundwork for future clinical studies of clopidogrel pharmacogenetics in Caribbean Hispanics.

The paradigm that assumes the autonomous management of universities involves them in the redefinition of their policies and processes and the training of their staff, designing new formulas that allow them to adapt to a changing environment. In this context, research and sustainable universities can link with society to solve its problems and influence a responsible and sustainable development. Through a Delphi panel, importance to acquire and improve project management (PM) competences by teaching and research staff (TRS) into innovating education and research projects is measured, from the standard of individual competences (ICB4) of the International Project Management Association (IPMA). Also, internal data sources from the flexible structures of two Spanish universities (the University of Cadiz (UCA) and the Technical University of Madrid (UPM)), are investigated, in order to analyze how they are organized. Thanks to the study of cases, an increasing tendency to work by projects is observed, empowering teams, managing properly stakeholders and facilitating their functions towards society. Likewise, after two rounds of experts’ consultation, consensus is reached with an acceptable and stable level of responses, resulting in confirmation that there is alignment between IPMA competences and TRS’ needs for sustained success in education and research, contributing to universities’ development, improvement and sustainability.

In this work it is acknowledged that important attempts to devise an emergent quantum (gravity) theory require space-time to be discretized at the Planck scale. It is therefore conjectured that reality is identical to a sub-quantum dynamics of ontological micro-constituents that are connected by a single interaction law. To arrive at a complex system-based toy-model identification of these micro-constituents, two strategies are combined. First, by seeing gravity as an entropic phenomenon and generalizing the dimensional reduction of the associated holographic principle, the universal constants of free space are related to assumed attributes of the micro-constituents. Second, as the effective field dynamics of the micro-constituents must eventually obey Einstein’s field equations, a sub-quantum interaction law is derived from a solution of these equations. A Planck-scale origin for thermodynamic black hole characteristics and novel views on entropic gravity theory result from this approach, which eventually provides a different view on quantum gravity and its unification with the fundamental forces.

The synthesis these past few years of novel organic molecules that spontaneously self-assemble into a large variety of molecular architecture, particularly generating organogels, has opened up new horizons for preparing functional materials. Here, we present an original preparation path of such materials through the making of hybrid gels of these molecules together with covalent polymers. Three types of systems are described: i) intermingled gels where a polymer gel and an organogel pervade one another; ii) encapsulation of self-assembled filaments in polymer fibrils, which provides a system with unusual magnetic properties; iii) the reverse situation where self-assembled nanotubes sheathe polymer fibrils. Here two covalent polymers are considered: a neutral polymer, namely stereoregular polystyrene (isotactic or syndiotactic), and a semi-conducting polymer, P3BT. In the latter case, semi-conducting nanowires are obtained.

In this paper we take China’s one child policy as an example and investigate its environmental impact. We develop a model for an economy using a standard overlapping generation model extended with human capital, endogenous fertility, and changing life expectancy. To model the environmental impact of economic activities, we use a modified IPAT model. We show that China’s one child has a very strong positive impact on the environment, particularly if we consider the whole human legacy.

A major health threat for children in the 21st century is physical inactivity in conjunction with the elevated prevalence of obesity. In Malaysia, low physical activity among children is a major concern. The objective of the study was to analyze the day to day variation of step count in a sample of obese children using the activPAL^TM monitor. This was a cross sectional study conducted in Kuala Terengganu, Terengganu. The sample compromised 41 boys and 24 girls between the ages of 9-11 years. Number of steps was objectively measured using an activPAL^TM accelerometer over a period of 4-7 days and had their height and weight measured. Mean step count from this sample of obese children was 8861 ± 3157steps. Steps per day were significantly higher for boys compared to girls (p=0.034). Obese children took significantly more steps at weekdays than on weekends (p=0.001). Steps/hour were significantly higher in weekday compared to weekend between 0600 to 0700 (p<0.001), 0700 to 0800 (p<0.001), 0800 to 0900 am (p<0.001), 0900 to 1000 (p=0.032), 1000 to 1100 (p=0.046), 1100 to 1200 (p<0.001), 1300 to 1400 (p=0.002), 1400 to 1500 (p<0.001), 1800 to 1900 (p=0.026) and 2000 to 2100 (p=0.019). Detailed daily patterns of physical activity are required to fully understand the differences across days that help future interventions to target those falling short particularly during weekend.

This paper presents a complete control strategy of the active return-to-center (RTC) control for electric power steering (EPS) systems. We first establish the mathematical model of the EPS system and analyze the source and influence of the self-aligning torque (SAT). Second, based on the feedback signals of steering column torque and steering wheel angle, we give the trigger conditions of a state switch between the steering assist state and the RTC state. In order to avoid the sudden change of the output torque for the driving motor when the state switches frequently between the steering assist state and the RTC state, we design an undisturbed state switching logic algorithm. This state switching logic algorithm ensures that the output value of the RTC controller is set to an initial value and increases in given steps up to a maximum value after entering the RTC state, and the output value of the RTC controller will reduce in given steps down to zero when exiting the RTC state. This therefore ensures smooth switch control between the two states and improves the driver’s steering feeling. Third, we design the RTC controller, which depends upon the feedback signals of the steering wheel angle and the angular velocity. In addition, the controller increases the auxiliary control function of the RTC torque based on vehicle speed. The experimental results show that the active RTC control method does not affect the basic assist characteristics, which effectively reduces the residual angle of the steering wheel at low vehicle speed and improves the RTC performance of the vehicle.

In Belgium, silages are often infected by Penicillium roqueforti sensu lato (s.l.). These toxigenic fungi are well adapted to silage conditions, and their prevention during feed-out is difficult. Bacillus velezensis strain NRRL B-23189 has been reported to inhibit P. roqueforti s.s. conidiospore germination in vitro by the production of lipopeptides. In the present study, the antagonistic effect of this B. velezensis strain towards P. roqueforti s.l. was evaluated in vitro and in vivo. In vitro, corn silage conditions were simulated, and the impact of B. velezensis culture supernatant or cell suspension on P. roqueforti s.l. growth, conidiospore germination and survival and roquefortine C production was evaluated. The antagonism was promising, but growth of B. velezensis in corn silage infusion was poor. An in vivo experiment with microsilos containing a mixture of perennial ryegrass and white clover artificially contaminated with P. roqueforti s.l. was carried out to determine if B. velezensis cell suspension could be used as an antagonistic silage inoculant. The B. velezensis cell suspension applied was unsuccessful in reducing P. roqueforti s.l. numbers at desiling after 56 days compared to no additive application. However, feed-out of the silage was not simulated, so it remains elusive whether or not B. velezensis exerts antagonistic activity during this phase.

In advanced world stroke is one of the disabling cause of death that can be managed with thrombolysis if presents early despite further risk of intracerebral haemorrhage. Secondary prevention is an important objective in ischaemic stroke where recurrence is very high with subsequent stroke. Carotid End Arterectomy impact a definitive and effective role for both symptomatic and asymptomatic carotid stenosis for secondary stroke prevention in selective cases. Thrombolysis is a potential primary management for certain group whereas carotid surgery employs secondary preventative measure in a specified ischaemic stroke group.

The space time fractional Korteweg-de Vries equation, modified Equal Width equation and Benney-Luke Equations are solved by using simple hyperbolic tangent Ansatz method. A simple compatible wave transformation in one dimension is employed to reduce the governing equations to integer ordered ODEs. Then, the ansatz approximation is used to derive exact solutions. Some illustrative examples are presented for some particular choices of parameters and derivative orders.

This paper proposes a crack recognition method based on high-resolution line array cameras and adaptive lifting algorithm. By defining the crack rate, this algorithm calculates the ratio of the crack area to the area of the entire collected image to characterize the damage extent of the current section. The algorithm first uses image preprocessing to reduce the image noise, then uses histogram equalization to enhance the feature of the crack region, divides the whole image into multiple sub-blocks, and extracts region features in the sub-block. At the same time, this algorithm defines related feature descriptors, and constructs weak classifiers according to each feature descriptor, and converts the weak classifiers into strong classifiers by using an adaptive lifting algorithm. Finally, this algorithm realizes the division of the crack regions. Experimental results show that the proposed algorithm can meet the actual needs and is better than other classical algorithms.

Garment sector has crucial working field in Turkey.It has also very high risky occupational health conditions and safety.The objective of this study is to define level of job level, work-related stress’ symptoms, social support and coping mechanisms of garment workers and to determine any related factors.This study is descriptive and cross-sectional. The study population comprised garment workers in the 16-65 age range. The data was collected by Assessment Form, The Brief Stress Coping Profile and Brief Job Stress Questionnaire. The level of work-related stress was statistically higher among the workers who had chronic disease, low economic, education status and poor quality of sleep. Psychological and physical physiological reactions to stress were found higher among women workers and those with chronic disease.It also was seen that job stress scores had a meaningful relationship with “emotional expression involving others” (r =.20) and “Avoidance and suppression” coping profile (r =.16; p <.01).Psychological symptom scores were found to have a low level of meaningful relationship with “Seeking help for solution” (r =-.08), “changing point of view” (r=.13) and “emotional expression involving others” coping profiles (r=.21). Work-related stress causes many health and behavioral problems. Work related reasons and coping profiles have powerful effects on stress.

Objective: The Rho GTPase/Rho kinase pathway is an important target in glaucoma treatment. This study investigated the hypotensive effect of RKI-1447, a Rho kinase inhibitor developed for cancer treatment, in a porcine ex vivo pigmentary glaucoma model. Materials and Methods: Twenty-eight fresh porcine anterior chambers were perfused with pigment medium (1.67 × 10⁷ pigment particles/mL) for 48 hours before being subjected to the RKI-1447 (n = 16) or the vehicle control (n = 12). Another twelve eyes with normal medium perfusion served as the control. The intraocular pressure (IOP) was recorded at two-minute intervals and the outflow facility was calculated. To investigate the intracellular mechanism of the IOP reduction, primary trabecular meshwork cells were exposed to RKI-1447 or the vehicle control and then analyzed for changes in cytoskeleton, motility, and phagocytosis. Results: Compared to the baseline, the perfusion of pigment caused a significant increase in IOP in the RKI-1447 group (P = 0.003) at 48 hours. Subsequent treatment with RKI-1447 significantly reduced IOP from 20.14 ± 2.59 mmHg to 13.38 ± 0.91 mmHg (P = 0.02). Pigment perfusion reduced the outflow facility from 0.27 ± 0.03 at baseline to 0.18 ± 0.02 at 48 hours (P < 0.001). This was partially reversed with RKI-1447. RKI-1447 exhibited no apparent changes in the micro- or macroscopic appearance, including histology. Primary TM cells exposed to RKI-1447 showed a significant disruption of the actin cytoskeleton both in the presence and absence of pigment exposure (P < 0.001) but no effect on TM migration was observed. Pigment-treated TM cells exhibited a reduction in TM phagocytosis, which RKI reversed. Conclusions: RKI-1447 is a novel ROCK inhibitor that significantly reduces IOP by disrupting TM stress fibers and increasing TM phagocytosis. These features may make it especially useful for the treatment of secondary glaucomas with an increased phagocytosis load but also for other open angle glaucomas.

Significant changes have occurred at Arabian Gulf Coast of Saudi Arabia over the last three decades. The area of mangrove was reduced by about 55%. Thus the economic, social, and environmental value of mangroves must be assessed over short -to long-term scales and employ these assessments for the awareness rising at local communities. This study provides a preliminary assessment of the risks on mangrove vegetation; it will provide database to mitigate the tremendous pressures due to coastal development and urban activities. The effects of human development on the mangrove plant cover in Eastern Region of KSA were recognised, during 2013 to 2016. The mean variations of physio-chemical characteristics in water and sediment were recorded. With regard to water analyses including; nitrogen, phosphorus, TSS, TDS, BOD, and turbidity were evaluated. On the other hand, for sediment: TDS, nitrogen, phosphorus, sulphate and total organic carbon were assessed. Moreover, the growth parameters: plant height, and size index, of Avicennia marina were recorded and estimated. It is concluded that human impact and urban developments have exerted drastic effects on the coastal ecosystems and its environments.

As the increase threat of flood risk and environmental safety due to the urbanization, Sponge city research has been attracting extensive attention both in practical and theoretical research field. To date, there are only scattered studies about Sponge city. Moreover, vary names of Sponge city prevalent in different countries, which leads to disconnection of literature in the same field of Sponge city. In this paper, a thorough systematic literature mining of Sponge city is presented. A literature analysis system is created, which includes literature export from Web of Sciences and systematic analysis via NoteExpress and CiteSpace. Some literature statistical results are derived. Challenges and opportunities for future research are anticipated. Our goals are to promote this promising thought, summarize past research, and identify issues for future research to create impacts on the practice of Sponge city.

For decades, the Ébrié Lagoon in Côte d'Ivoire has been the receptacle of wastewater effluent and household waste transported by runoff water. This work assesses the spatio-temporal variability of the Ébrié lagoon water quality at the city of Abidjan. The methodological approach used in this study is summarized in three stages: the choice and standardization of the parameters for assessing water quality for uses such as aquaculture, irrigation, watering, and sports and recreation; the weighting of these parameters using the Hierarchical Analysis Process (AHP) of Saaty; and finally, the aggregation of the weighted parameters or factors. Physicochemical and microbiological analysis data on the waters of the Ébrié lagoon for June and December of 2014 and 2015 were provided by the Ivorian Center for Anti-Pollution (Centre Ivoirien Anti-Pollution, CIAPOL) and the concentrations of trace elements in sediments (As, Cd, Cr, Pb, Zn) were used. The aggregation of standardized and weighted parameters allowed the determination of the Water Quality Indices (WQI) by usage for each bays of the lagoon. The results show that in both 2014 and 2015, the waters of the Ébrié lagoon were generally of poor quality for the different uses examined in this study (aquaculture, irrigation, watering and sport and recreation) with an accentuation in 2015. However, some bays of the lagoon have waters of dubious to satisfactory quality. This study contributes an improved evaluation of the Ébrié lagoon waters.

The Samenta study was conducted in 2009 in the Greater Paris area to estimate the prevalence of psychiatric disorders among the homeless. A cross-sectional survey was performed with a three-stage random sample of homeless people (n = 859), including users of day services, emergency shelters, hot meal distribution, long-term rehabilitation centres and social hotels. Information was collected by a lay interviewer, using the Mini International Neuropsychiatric Interview, and completed by a psychologist through an open clinical interview. In the end, a psychiatrist assessed the psychiatric diagnosis according to the ICD10. One third of the homeless in the Paris area had at least one severe psychiatric disorder: psychotic disorders (13%), anxiety disorders (12%) or severe mood disorders (7%). One in five was alcohol dependent and 18% were drug users. Homeless women had significantly higher prevalence of anxiety disorders and depression and men were more likely to suffer from psychotic disorders. Homeless people of French origin were at higher risk of SPD, as well as people who experienced various adverse life events before the age of 18 (running away, sexual violence, parental disputes, and/or addictions) and those who experienced homelessness for the first time before the age of 26. The prevalence rates of main psychiatric disorders within the homeless population of our study are consistent with those reported in other Western cities. Our results advocate for an improvement in detection, housing and care of psychiatric homeless.

Poly(acrylic acid) (PAAc) hydrogels possess good bioadhesive properties and allow enhanced penetration of drugs. In addition, it is possible to localize the absorption site of the drug in the hydrogel and increase the drug residence time. As opposed to other cross-linking processes radiation-induced polymer cross-linking can be easily and rapidly carried out without the use of cross-linking agents and other chemical additives. In this study, we fabricated metronidazole (MD) containing PAAc hydrogel (MD/PAAc) with different MD contents (0.1, 0.25, 0.5 wt%) using varying radiation doses (25, 50, 75 kGy) by gamma-irradiation. The physical and thermal properties were determined by gel content analysis, swelling ratio measurements, compressive strength measurements, differential scanning calorimetery, and thermogravimetric analysis. The properties of the hydrogel degraded due to the crystalline nature of MD. The properties of the hydrogel degraded due to the crystalline nature of MD. Cumulative release observed after 50 min in the case of 0.5MD/PAAc and 0.1MD/PAAc was 50% and 10%, respectively. Our findings suggest that MD/PAAc could be a suitable drug delivery carrier for use with radiation-based techniques.

A temperate deep lake, Lake Kuttara, Hokkaido, Japan (148 m deep at maximum) was completely frozen every winter in the 20th century. However, unfrozen conditions of the lake over winter occurred four times in the 21st century, which is probably due to global warming. In order to understand how thermal regime of the lake responds to climate change, its heat storage change was calculated by estimating heat budget of the lake and monitoring water temperature at the deepest point for September 2012–June 2016. As a result, temporal change of the heat storage from the heat budget was very consistent with that from the direct temperature measurement (determination coefficient R² = 0.827). The 1978–2017 data at a meteorological station near Kuttara indicated that there are significant (less than 5% level) long-term trends for air temperature (0.024 °C/yr) and wind speed (−0.010 m/s/yr). A sensitivity analysis for the heat storage from the heat budget estimate and an estimate of return periods for mean air temperature in mid-winter allow us to conclude that the lake could be unfrozen once per about two year in a decade.

This work focuses on the design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common, for example in sports such as racing cars or American Football. The device requires the highest sensitivity achievable with a single proof mass approach, and a very low error (<1%) as the accuracy for these types of applications is paramount. The optimization method differs from previous work as it is based on the progressive increment of the sensor mass moment of inertia (MMI) in all three axes. The work numerically demonstrates that an increment of MMI determines an increment of device sensitivity with a simultaneous reduction of cross-talk in the particular axis under study. The final device shows a sensitivity increase of about 80% in the Z-axis and a reduction of cross-talk of 18% respect to state-of-art sensors available in the literature. Sensor design, modelling and optimization are presented, concluding the work with results, discussion and conclusion.

There is increasing evidence that the impact of climate change on the productivity of grasslands will at least partly depend on their biodiversity. A high level of biodiversity may confer stability to grassland ecosystems against environmental change, but there are also direct effects of biodiversity on the quantity and quality of grassland productivity. To explain the manifold interactions, and to predict future climatic responses, models may be used. However, models designed for studying the interaction between biodiversity and productivity tend to be structurally different from models for studying the effects of climatic impacts. Here we review the literature on the impacts of climate change on biodiversity and productivity of grasslands. We first discuss the availability of data for model development. Then we analyse strengths and weaknesses of three types of model: ecological, process-based and integrated. We discuss the merits of this model diversity and the scope for merging different model types.

Dye sensitized solar cell technology is having an important role in renewable energy research due to its features and low cost manufacturing processes. Devices based on this technology appear very well suited for integration into glazing systems due to their characteristics of transparency, color tuning and manufacturing directly on glass substrates. Field data of thermal and electrical characteristics of dye sensitized solar modules (DSM) are important since they can be used as input of building simulation models for the evaluation of their energy saving potential when integrated into buildings. However still few works in the literature provide this information. The study here presented wants to contribute to fill this gap providing a thermal and electrical characterization of a DSM in real operating conditions using a method developed in house. This method uses experimental data coming from test boxes exposed outdoor and dynamic simulation to provide thermal transmittance and solar heat gain coefficient (SHGC) of a DSM prototype. The device exhibits an U-value of 3.6 W/m²K, confirmed by an additional measurement carried on in the lab using a heat flux meter, and a SHGC of 0.2, value compliant with literature results. Electrical characterization evidences an increase of module power with respect to temperature causing DSM suitable for integration in building facades.

In most industrialized countries, screening programs for cervical cancer have shifted from cytology (Pap smear or ThinPrep) alone on clinician-obtained samples to the addition of screening for human papillomavirus (HPV), its main causative agent. For HPV testing, self-sampling instead of clinician-sampling has proven to be equally accurate, in particular for assays that use nucleic acid amplification techniques. In addition, HPV testing of self-collected samples in combination with a follow-up Pap smear in case of a positive result is more effective in detecting precancerous lesions than a Pap smear alone. Self-sampling for HPV testing has already been adopted by some countries, while others have started trials to evaluate its incorporation into national cervical cancer screening programs. Self-sampling may result in more individuals willing to participate in cervical cancer screening, because it removes many of the barriers that prevent women, especially those in low socioeconomic and minority populations, from participating in regular screening programs. Several studies have shown that the majority of women who have been underscreened but who tested HPV-positive in a self-obtained sample, will visit a clinic for follow-up diagnosis and management. Additionally, a self-collected sample can also be used for vaginal microbiome analysis, which can provide additional information about HPV infection persistence as well as vaginal health in general.

In 2002, the Higher Learning Commission, a regional accrediting agency in the US, placed the community college in this study on academic probation for several criteria and many residents of the community believed that closing doors was the best option for addressing these concerns. This study is designed to ascertain data from external stakeholders of the community college regarding their current perceived value of the community college and suggestions about moving from the present to the future. The main question of the study is: What are external stakeholders’ perceptions of the value of the college to the service area? This qualitative approach is used consisting of interviews, focus groups, surveys, and document review to triangulate stakeholder perspectives. Participants included 176 high school seniors from different counties, four counselors, and four focus groups. The findings from the data are presented in this study are planned to be used by community college officials to incorporate into their strategic plans. They showed that the college needs to consider the value that it brings to the service area including economic benefits, specifically community support; accessibility; and cost of tuition.

Zn–Ni plating is indispensable in various industries because of its high corrosion resistance. However, Ni has been reported to trigger allergies; thus, an alternative Ni-free plating is desired. Zn–Fe plating is considered to be a promising candidate, albeit its corrosion resistance still needs to be improved. The corrosion resistance of Zn–Fe plating is expected to increase by the addition of Mo as the third alloying element as it is more noble than Zn and Fe. In this study, Zn–Fe–Mo plating with a corrosion resistance nearly equivalent to that of the Zn–Ni plating was fabricated. Zn–Fe–Mo plating was electrically deposited from continuously agitated plating baths prepared by mixing ZnSO₄, FeSO₄, Na₂MoO₄, Na₃C₆H₅O₇, and Na₂SO₄ using Fe or Ni plates as the substrate. The surface morphology, composition, crystal phase, and electronic state of Mo of the platings were investigated by SEM-EDS, XRD, and XPS. The anti-corrosion performance was evaluated by Tafel extrapolation method. Formation of plating comprising a Mo containing alloy phase was found to be crucial for improving corrosion resistance. The Zn–Fe–Mo plating demonstrates promise for replacing anti-corrosion Zn–Ni platings.

Diseases caused by contaminated water consumption and poor hygiene are among the leading cause of death in children, the elderly and people with compromised immune system. The present study aims to assess the drinking water quality of some selected drinking water sources in the chosen study area using water quality index (WQI). Samples of drinking waters were collected from four different sources—river, sachet (packaged), borehole and well in Jabi, Abuja, Nigeria for physicochemical and bacteriological analyses using standard methods. With the exception of pH, river water had the highest content of all the physicochemical parameters examined. Some of the physicochemical parameters such as temperature and pH determined in this study were mostly within the World Health Organization (WHO) standard. The bacteriological analyses revealed that the highest total viable counts of 1.54 (0.12) × 10² (cfu/mL) were obtained in the river sample while the least values of 0.03 (0.00) × 10² (cfu/mL) were obtained in the sachet water. Three bacterial isolates of Escherichia coli, Pseudomonas spp and Aeromonas spp were isolated from well water while Pseudomonas spp and Proteus spp were isolated from borehole water. All other bacteria were isolated from the river. The study demonstrates that the safest drinking water source in Idu district, Jabi, Abuja is the sachet/packaged water while the least safe is the river water due to the presence of significant opportunistic pathogens. The results of this study are beneficial for water quality management and could be used for low-cost effective water quality assessment in Jabi.

The main goal of this paper is to address how quickly and to what extent are international organizational cultures, brought by the world companies after the process of privatization, being implemented in a single monolithic culture. For this purpose was adopted and applied Denison model of organizational culture, which has been chosen because it emphasizes the need for balance between requirements for organization’s stability demands and its required flexibility. Considering that a different organizational culture reflects systematic change of an entire organization, this paper focuses on exploring the differences in culture dimensions among companies in domestic and foreign ownership in Serbia. A sample of 1000 employees was statistically processed. Changes in organizational culture tend to be relatively slow. The results confirm that organizational culture is a complex working environment, concerning organizational values, which represents a fundamental element of organizations. Given that the process of company ownership changes occurred fifteen years prior to the research implementation, obtained results show effects of interaction between national and organizational culture in this, relatively short, period of time. Obtained results can be generalized to countries that are passing or have recently passed a transition, and are similar in cultural characteristics.

Rice is currently the most important food crop in the world and we are only just beginning to study the bacterial associated microbiome. It is of importance to perform screenings of the core rice microbiota and also to develop new plant-microbe models and simplified communities for increasing our understanding about the formation and function of its microbiome. In order to begin to address this aspect, we have performed the isolation of bacterial strains from the endorhizosphere of two rice cultivars from Venezuela. The validation of plant-growth promoting bacterial activities in vitro has led us to select and characterize 15 isolates for in planta studies such as germination test, endophytism ability and plant growth promotion. Consequently, a set of 10 isolates was selected for the set-up of an endophytic consortium as a simplified model of the natural rice bacterial endomicrobiota. Upon inoculation, the colonization and abundance of each strain within the rice roots was tracked by a culture-independent technique in gnotobiotic conditions in a 30 days period. Four strains belonging to Pseudomonas, Agrobacterium and Delftia genera have shown a promising capacity for colonizing and coexistence in root tissues. On the other hand, a bacterial community taxonomic profiling of the rhizosphere and the endorhizosphere of both cultivars were obtained and are discussed. This study is part of a growing body of research on core crops microbiome and simplified microbiomes, which strengthens the formation process of the endophytic community leading to a better understanding of the rice microbiome.

Over the years, the Egyptian temples at Luxor city have been intensely investigated, but most of these studies just focused on the classical sides of the archaeological and historical descriptions. Many of the environmental problems are inevitable results of the unplanned urban crawling around the monuments temples. This paper aims at assessing the environmental changes around some temples of Luxor City using Remote sensing and GIS techniques. In particular, a historical database made up of Corona and Landsat TM data have been investigated along with the new acquisitions of Quickbird2 and Sentinel2. Results from our investigation highlighted rapid changes in urban and agricultural areas, which adversely affected the Egyptian monumental temples causing serious degradation phenomena. Using the information obtained from our RS&GIS based analysis, mitigation strategies have been also identified for supporting the preservation of the archaeological area.

The study aimed to investigate the effects of colonization with two arbuscular mycorrhizal (AM) fungi, Funneliformis mosseae , Diversispora versiformis , alone and in combination on the growth and nutrient acquisition of NaCl-stressed Chrysanthemum morifolium (Hangbaiju) plants in the greenhouse experiment. Mycorrhizal and non-mycorrhizal Hangbaiju plants were grown under different salinity levels imposed by 0, 50 and 200 mM NaCl for five months, following 6 weeks of non-saline pre-treatment. The results showed that root length, shoot and root dry weight, total dry weight, shoot and root N concentration were higher in mycorrhizal than in non-mycorrhizal plants under moderate saline conditions especially with D. versiformis colonization. As salinity increased, the mycorrhizal colonization, the mycorrhizal dependence (MD) decreased. Enhancement of tissue N acquisition is probably the main mechanism underlying salt tolerance in AM plants. It is suggested that the symbiotic associations between D. versiformis fungus and C. morifolium plants may be taken as a biotechnological practice in culture.

Background: Modern MEG devices include 102 sensor triplets containing one magnetometer and two planar gradiometers. The first processing step is often a signal space separation (SSS), which provides a powerful noise reduction. A question commonly raised by researchers and reviewers is which data should be employed in source reconstruction: (1) magnetometers only, (2) gradiometers only, (3) magnetometers and gradiometers together. The MEG community is currently divided about the proper answer and strong arguments in favor and against these three approaches often expressed. Methods: First, we provide theoretical evidence that both gradiometers and magnetometers contain the same information after SSS, and argue that they both result from the backprojection of the same SSS components. Then, we compare beamforming source reconstructions from magnetometers and gradiometers in real MEG recordings before and after SSS. Results: Without SSS, the correlation between source time series extracted from magnetometers and gradiometers was high, with Pearson correlation coefficient r=0.5-0.8. After SSS, these correlation values increased dramatically, reaching over 0.90 across all cortical areas. Conclusions: After SSS, almost identical source reconstructions (r>0.9) can be obtained with magnetometers and gradiometers, as long as regularization is selected appropriately to account for the different properties in magnetometers and gradiometers covariance matrices.

Currently, various issues on environment have been discussed, whether the importance, destruction or ways to prevent the destruction of the environment. This paper will explore the issue from the conventional viewpoint as well as from the Islamic perspective. Destruction of the environment in recent times has worsened due to the uncontrolled exploitation of natural resources by human beings in order to generate profits. In view of the increasing technological development in Malaysia presently, this matter should not have occurred because the citizens intellectual abilities can be considered advanced. In other words, these people should be able to weigh between positive and negative consequences of voraciously exploiting natural resources. However, the greed that engulfs some of these people has obscured their view from grasping the future consequences of their acts. Based on the Islamic perspective in which the Quran is the ultimate reference, destruction of the environment can actually be prevented if every individual is aware of his or her trustworthiness or responsibility as His caliphate in this universe. Nevertheless, is there any specific verse in the Quran which explains about preservation of the environment? Can lessons from the Quran provide solutions to the environmental crises in Malaysia? This study provides explanations to the questions based on literature surveys and content analyses. By interpreting some selected verses that relate to preservation of the environment, findings from the discussions have identified that the Quranic verses are valuable resources for the sustainability of the environment.

In this paper the influence of austempering temperature and salt bath agitation on the final microstructure and mechanical properties of the ferritic ductile iron were studied. 17 samples had been subjected to different heat treatment parameters. Different microstructures were recorded upon the completion of the tests. From the obtained micro images, it is obvious that both the austempering temperature and salt bath agitation affect the final microstructure of the austempered ductile iron. Lower austempering temperatures and salt bath agitation produce more ausferrite in the microstructure, hence the harder and tougher phases are present. This was confirmed with hardness and toughness test of the 17 heat-treated samples. Lower austempering temperatures give more ausferrite phase and therefore higher hardness, but hardness decreases with increasing austempering temperatures. Toughness rises with rising austempering temperatures, but drops significantly with temperatures above 395°C because of the final microstructure.

Then the purposes of this study were to compare and correlate the aerobic threshold (TH_aer) and anaerobic threshold (TH_anaer) measured during a new single judo specific incremental test and Treadmill Test for aerobic demand evaluation. Eight well-trained male competitive judo players (24.3±7.9 years; height of 169.3±6.7cm; fat mass of 12.7±3.9%) performed a maximal incremental specific test for judo mimicking the UchiKomi drills and on treadmill in different days. There was difference between specific and general TH_aer (P=0.0006) as well as weak correlation for TH_aer (r=0.32; R²=0.1; P=0.2) and TH_anaer (rs=-0.31; R²=0.1; P=0.12). When correlation was applied with normalized data (percentage of peak load) we observed moderate correlation for TH_aer (r=0.76; R²=0.58; P=0.027), but the same was not observed for TH_anaer. We conclude that there is a need of TH_aer and TH_anaer evaluation through a specific test for Judo.

The crack geometry and associated strain field around Berkovich and Vickers indents on silicon have been studied by X-ray diffraction imaging and micro-Raman spectroscopy scanning. The techniques are complementary, the Raman data coming from within a few micrometers of the indentation, whereas the X-ray image probes the strain field at a distance of typically tens of micrometers. For example, Raman data provides an explanation for the central contrast feature in the X-ray images of an indent. Strain relaxation from breakout and high temperature annealing are examined and it is demonstrated that millimeter length cracks, similar to those produced by mechanical damage from misaligned handling tools, can be generated in a controlled fashion by indentation within 75 micrometers of the bevel edge of 200mm diameter wafers.

Uranium isotopes actively investigated as mechanistic or time scale tracers of natural processes. This paper describes the occurrence and redistribution of U in the Vendian aquifer of the paleo valley at NW Russia. Forty-four rock samples were collected from boreholes, and twenty-five groundwater samples. The U, Fe concentration, and 234U/238U activity ratio were determined in the samples. We estimated the 14C and 234U-238U residence time of groundwater in an aquifer. It has been established that the processes of chemical weathering of Vendian deposits led to the formation of a strong oxidation zone, developed above -250 m.a.s.l. The inverse correlation between the concentrations of uranium and iron is a result of removal of U from paleo valley slopes in oxidizing conditions and accumulation of U at the bottom of the paleo valley in reducing conditions, and accumulation of Fe on the slopes and removal from bottom. Almost all U on the slopes replaced by a newly formed hydrogenic U with a higher 234U/238U activity ratio. After that dissolution and desorption of hydrogenic U was occurred from the slopes during periods without any glaciations and marine transgressions. Elevated concentrations of U preserved in not oxidized lenses at the paleo valley bottom.

Borneol and menthol were two terpenes wildly used as penetrate enhancer in transdermal drug delivery. To explore their penetration enhancement effect towards hydrophilic drug, 5-FU was selected as model drug. A method combined vitro permeation studies and coarse grain molecular dynamics was used to investigate their penetration enhancement effect towards 5-FU. As a result, although both borneol and menthol showed a penetration enhancement effect towards 5-FU, they differed a lot in the penetration enhancement mechanism, which was also thought to account for their different penetration enhancement effect. As for menthol, SC bilayer disrupting effect seemed to be its main mechanism. While for borneol, its mechanism seemed to be more complicated. Except for disrupting the SC bilayer, it could also increase the permeation of 5-FU by enhancing the diffusion rate of 5-FU or inducing the formation of transient pore. All of this enable us a molecular understanding of borneol and menthol’s penetration enhancement effect towards hydrophilic drug, which might provide some guidance in the latter research and application.

The basic oxygen furnace slag (BOF) was wide used in road construction, but there was a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA) containing stone mastic asphalt (SMA), porous asphalt (PA) and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag contents in the asphalt mixtures would affect the cooling behavior after compaction. Asphalt mixture specimens contained 0%, 20%, 40% and 60% BOF slag, respectively, as coarse aggregate. Test results showed that BOF slag has a lipophilic property, so it can be adsorbed by asphalt cement, thereby reducing the cost of asphalt. The stability value of all asphalt mixtures increases with the proportion of BOF slag replacement. In addition, the voids in the mineral aggregate (VMA) value variable exhibited significant differences among asphalt mixtures, and could determine the deviation of the cooling trend of asphalt mixtures. Furthermore; it was found that the cooling procedure of the BOF slag used in dense-graded asphalt mixture takes about 100 min, and that the temperature tends to be moderate; however, it took about 120 min of cooling the SMA and PA mixture with BOF slag. In addition, the voids distribution of dense asphalt mixture was not uniform. It would result in various locations of thermal energy temperature on asphalt mixtures that were inconsistent.

The growth of urban population, combined with an increase of extreme events due to climate changes call for a better understanding and representation of urban floods. Rainfall and infiltration are two important factors that affect the watershed response to a given precipitation event. In this paper, we evaluate the influence of the representation of infiltration and spatially variable rainfall on the computer simulation of the floods that affected the city of Hull, UK in June 2007. This work compares a uniform rainfall with one generated using Kriging with External Drift and a constant infiltration equal to the soil hydraulic conductivity with a neglected infiltration. The results of the four simulations are then compared with the flood extents observed by public authorities. It results that the computer model is able the reproduce the general dynamic of the flood and identify the main inundated areas. We found that neglecting the infiltration induce a better representation of this flood event. Furthermore, the use of radar rainfall results in an accuracy similar to the one obtained with a constant rainfall. This study indicates that when the spatial resolution of the rainfall data is low compared to the catchment size and the precipitation distribution is uniform, the spatial variability of the rainfall might not add significant information.

Research on the coral-eating crown-of-thorns starfish (CoTS) has waxed and waned over the last few decades, mostly in accordance with the occurrence of population outbreaks at key locations, such as Australia’s Great Barrier Reef. This review considers advances in our understanding of the biology and ecology of CoTS based on the latest resurgence of research interest, which culminated in this current special issue on the Biology, Ecology and Management of Crown-of-Thorns Starfish. More specifically, this review considers progress against 41 specific research questions posed in the seminal review by P. Moran 30 years ago, as well as exploring new directions for CoTS research. Despite the plethora of research on CoTS (>1,200 research articles), there are persistent knowledge gaps that constrain effective management of outbreaks. Although directly addressing some of these questions will be extremely difficult, there have been considerable advances in understanding the biology of CoTS, if not the proximal and ultimate cause(s) of outbreaks. Moving forward, researchers need to embrace new technologies and opportunities to advance understanding of CoTS biology and behaviour, with focus given to key questions that will improve effectiveness of management to reduce the frequency and likelihood of future outbreaks, if not preventing them altogether.

Shiga toxin (Stx) produced by Escherichia coli is the main pathogenic factor of diarrhea-associated hemolytic uremic syndrome (HUS), which is characterized by obstruction of renal microvasculature by platelet-fibrin thrombi. It is well known that the oxidative imbalance generated by Stx induces platelet activation, contributing to thrombus formation. Moreover, activated platelets release soluble CD40 ligand (sCD40L) which in turn contributes to oxidative imbalance, triggering the release of reactive oxidative species (ROS) on various cellular types. The aim of this work was to determine if the interaction between the oxidative response and platelet-derived sCD40L participates in the pathogenic mechanism during HUS. Activated human glomerular endothelial cells (HGEC) by Stx2 induced platelets to adhere to them. Although platelet adhesion did not contribute to endothelial damage, high levels of sCD40L were released to the medium. The release of sCD40L by activated platelets was inhibited by antioxidant treatment. Furthermore, we found increased levels of sCD40L in plasma from HUS patients, which were also able to trigger the respiratory burst in monocytes, in a sCD40L-dependent manner. Thus, we concluded that platelet-derived sCD40L and the oxidative response are reciprocally stimulated during Stx2-associated HUS. This process may contribute to the evolution of glomerular occlusion and the microangiopathic lesions.

Agavins consumption has lead to accelerate body weight loss in mice. We investigated the changes on cecal microbiota and short chain fatty acids (SCFA) associated to body weight loss in overweight mice. Firstly, mice were fed with standard (ST5) or high fat (HF5) diet for 5 weeks. Secondly, overweight mice were shifted to standard diet alone (HF-ST10) or supplemented with agavins (HF-ST+A10) or oligofructose (HF-ST+O10), five more weeks. Cecal contents were collected before and after supplementation to determine microbiota and SCFA concentrations. At the end of first phase, HF5 mice showed a significant increase of body weight, which was associated with reduction of cecal microbiota diversity (PD whole tree; non-parametric t-test, P < 0.05), increased Firmicutes/Bacteroidetes ratio and reduced SCFA concentrations (t-test, P < 0.05). After diet shifted, HF-ST10 normalized its microbiota, increase its diversity and SCFA levels, whereas agavins (HF-ST+A10) or oligofructose (HF-ST+O10) led to partial microbiota restoration, with normalization of the Firmicutes/Bacteroides ratio as well as higher SCFA levels (P < 0.1). Moreover, agavins noticeably enriched Klebsiella and Citrobacter (LDA > 3.0); this enrichment has not been reported previously under a prebiotic treatment. In conclusion, agavins or oligofructose modulated cecal microbiota composition, reduced extent of diversity and increased SCFA. Furthermore, identification of bacteria enriched by agavins, opens opportunities to explore new probiotics.

Affective computing in general and human activity and intention analysis in particular, is a rapidly growing field of research. Head pose and emotion changes, present serious challenges when applied to player’s training and ludology experience in serious games or analysis of customer satisfaction regarding broadcast and web services or monitoring a driver’s attention. Given the increasing prominence and utility of depth sensors, it is now feasible to perform large-scale collection of three-dimensional (3D) data for subsequent analysis. Discriminative random regression forests was selected in order to rapidly and accurately estimate head pose changes in unconstrained environment. In order to complete the secondary process of recognising four universal dominant facial expressions (happiness, anger, sadness and surprise), emotion recognition via facial expressions (ERFE) was adopted. After that, a lightweight data exchange format (JavaScript Object Notation-JSON) is employed, in order to manipulate the data extracted from the two aforementioned settings. Motivated by the need of generating comprehensible visual representations from different sets of data, in this paper we introduce a system capable of monitoring human activity through head pose and emotion changes, utilising an affordable 3D sensing technology (Microsoft Kinect sensor).

Thermal-expandable microcapsules (TEMs) for water-based coatings were synthesized with co-polymer of Acrylonitrile (AN) - Methyl methacrylate (MMA) - Ethylhexyl acrylate (EHA) - Divinylbenzene (DVB) as shell and toluene-p-sulfonyl hydrazide as core by suspension polymerization method. It was found that the microcapsules with desirable thermal expansion property and good heat stability could be obtained with a shell monomers composition of 70% AN /20% MMA /9% EHA /1% DVB. When 2% styrene-maleic acid copolymer (SMC) as emulsifier and 3% poly (vinyl pyrrolidone) (PVP) as dispersing agent were used, well defined spherical and more uniform microcapsules could be prepared. It was also found that when the shell/core mass ratio was 3:1, an encapsulation efficiency of ca. 94.5% could be achieved. Beyond this ratio, the increase of encapsulation efficiency reached a plateau. The 100 μm thickness film of water-based coating containing 5% microcapsules could be expanded to the thickness of 450 μm after exposed at 150 °C for 2 minutes. TG analysis revealed the mass loss start temperature of coating increased by more than 30 °C when 5% microcapsules were added to water-based coatings, which demonstrated the flame-retardant function of the coatings.

All empirical water column correction methods have consistently been reported to require existing depth sounding data for the purpose of calibrating a simple depth retrieval model; they yield poor results over very bright or very dark bottoms. In contrast, we set out to (i) use only the relative radiance data in the image along with published data, and several new assumptions, (ii) in order to specify and operate the simplified radiative transfer equation (RTE), (iii) for the purpose of retrieving both the satellite derived bathymetry (SDB) and the water column corrected spectral reflectance over shallow seabeds. Sea truth regressions show that SDB depths retrieved by the method only need tide correction. Therefore it shall be demonstrated that, under such new assumptions, there is no need (i) for formal atmospheric correction, (ii) nor for conversion of relative radiance into calibrated reflectance , (iii) nor for existing depth sounding data, to specify the simplified RTE and produce both SDB and spectral water column corrected radiance ready for bottom typing. Moreover, the use of the panchromatic band for that purpose is introduced. Altogether, we named this process the Self-Calibrated Supervised Spectral Shallow-sea Modeler (4SM). This approach requires a trained practitioner, though, to produce its results within hours of downloading the raw image. The ideal raw image should be a “near-nadir” view, exhibit homogeneous atmosphere and water column, include some coverage of optically deep waters and bare land, and lend itself to quality removal of haze, atmospheric adjacency effect, and sun/sky glint.

The activity and cyclability of Cu-MOF-74 as catalyst was studied for the ligand-free C-O cross-coupling reaction of 4-nitrobenzaldehyde (NB) with phenol (Ph) to form 4-formyldiphenyl ether (FDE). Cu-MOF-74 is characterized by unsaturated copper sites in a highly porous metal-organic framework. The influence of solvent, reaction temperature, NB/Ph ratio, catalyst concentration and basic agent (type and concentration) were evaluated. High conversions were achieved at 120°C, 5 mol% of catalyst, NB/Ph ratio of 1:2, DMF as solvent and 1 equivalent of K2CO3 base. The activity of Cu-MOF-74 material was higher than other ligand-free copper catalytic systems tested in this study. This catalyst was easily separated and reused in five successive runs, achieving a remarkable performance without significant porous framework degradation. The leaching of copper species in the reaction medium was negligible. The O-arylation between NB and Ph took place only in the presence of Cu-MOF-74 material, being negligible without the solid catalyst.

The creep behaviors of TA2 and R60702 at low and intermediate temperature were presented and discussed in this paper. Experimental results indicated that an apparent threshold stress exhibited in the creep deformation of R60702. Meanwhile, the primary creep phase was found as the main pattern in the room temperature creep behavior of TA2. Compared with exponential law, the power law has been proved to be a proper constitutive model in the description of primary creep phase. It also showed that θ projection method had its significant advantage in the evaluation of accelerated creep stage. Thus, a composite model which combined power law with θ projection method was applied in the creep curves evaluation at low and intermediate temperature. Based on the multiaxial creep deformation results, the model was modified and discussed. A linear relationship existed between composite model parameters and applied load. Finally, the creep life could be accurately predicted and the composite model method is suitable for application in low and intermediate temperature creep life analysis.

This paper presents new above-ground biomass (AGB) and biomass components equations for seventeen forest species in the temperate forests of northwestern Mexico. A data set corresponding to 1336 destructively sampled oak and pine trees was used to fit the models. Generalized method of moments was used to simultaneously fit systems of equations for biomass components and AGB, to ensure additivity. Additionally, the carbon content of each tree component was calculated by the dry combustion method, in a TOC analyser. The fitted equations accounted for on average 91, 83, 84 and 78% of the observed variance in stem wood and stem bark, branch and foliage biomass, respectively, whereas the total AGB equations explained on average 93% of the total observed variance in AGB. The inclusion of h or d²h as additional predictor in the d-only based equations systems slightly improved estimates of stem wood, stem bark and total above-ground biomass, and greatly improved the estimates produced by the branch and foliage biomass equations. The fitted equations were used to estimate AGB stocks at stand level from a database on growing stock from 429 permanent sampling plots. Three machine-learning techniques were used to model the estimated stand level AGB and carbon contents; the selected models were applied to map the AGB and carbon distributions in the study area, which yielded mean values of 129.84 Mg ha^-1 and 63.80 Mg ha^-1, respectively.

We propose an approach for estimating the error in depth data provided by generic 3D sensors, which are modern devices capable of generating an image (RGB data) and a depth map (distance) or other similar 2.5D structure (e.g. stereo disparity) of the scene. Our approach starts capturing images of a checkerboard pattern devised for the method. Then proceed with the construction of a dense depth map using functions that generally comes with the device SDK (based on disparity or depth). The 2D processing of RGB data is performed next to find the checkerboard corners. Clouds of corner points are finally created (in 3D), over which an RMS error estimation is computed. We come up with a multi-platform system and its verification and evaluation has been done, using the development kit of the board nVIDIA Jetson TK1 with the MS Kinects v1/v2 and the Stereolabs ZED camera. So the main contribution is the error determination procedure that does not need any data set or benchmark, thus relying only on data acquired on-the-fly. With a simple checkerboard, our approach is able to determine the error for any device. Envisioned application is on 3D reconstruction for robotic vision, with a series of 3D vision sensors embarked in robots (UAV of type quadcopter and terrestrial robots) for high-precision map construction, which can be used for sensing and monitoring.

Hybrid fiber reinforced composites can be controlled by price, weight and various mechanical properties depending on fiber ratio and lamination method. Despite these excellent hybrid properties, there is a disadvantage that inter-laminar fracture due to external impact, which is the biggest weakness of fiber reinforced composite materials, is weak. The test specimens were prepared by using a vacuum bag method, which is manufactured by using an autoclave device. The pre-preg is manufactured in the form of a B-stage. In the process of fabricating the nanoparticle pre-preg, the homogeneizer using an ultrasonic wave was used to disperse the epoxy subject without the curing agent into nanoparticles. The dispersion of the nanoparticles was dispersed by the weight of the epoxy resin. This is to take into account the cohesion of HNT and to understand the range of cohesion of HNT in a matrix with viscosity and its phenomenon. According to the Comparison of the interlayer interfacial properties and mechanical properties of Aramid / Basalt fiber hybrid composites by HNT addition, the fracture toughness, ILSS and bending strength of specimens with HNT content of more than a certain level were decreased because of the aggregation of HNT.

The attention to sustainable-related issues has grown fast in recent decades. The experience gained with these themes reveals the importance of considering this topic in the construction industry, which represents an important sector in the world. This work consists on conducting a multicriteria analysis of four cement powders, with the objective of calculating and analysing the environmental, human health and socio-economic effects of their production processes. The economic, technical, environmental and safety performances of the examined powders result from official, both internal and public, documents prepared by the producers. The Analytic Hierarchy Process permitted to consider several indicators (i.e. environmental, human health related and socio-economic parameters) and to conduct comprehensive and unbiased analyses which gave the best, most sustainable cement powder. As assumed in this study, the contribution of each considered parameter to the overall sustainability has a different incidence, therefore the procedure could be used to support on-going sustainability efforts under different conditions. The results also prove that it is incorrect to consider only one parameter to select the ‘best’ cement powder, but several impact categories should be considered and analysed if there is an interest for pursuing different, often conflicting interests.

The use of unmanned aerial vehicle (UAV) during emergency response of a disaster has been widespread in recent years and the terrain images captured by the cameras on board these vehicles are significant sources of information for such disaster monitoring operations. Thus, analyzing such images are important for assessing the terrain of interest during such emergency response operations. Further, these UAVs are mainly used in disaster monitoring systems for the automated deployment of sensor nodes in real time. Therefore, deploying and localizing the wireless sensor nodes optimally, only in the regions of interest that are identified by segmenting the images captured by UAVs, hold paramount significance thereby effecting their performance. In this paper, the highly effective nature-inspired Plant Growth Simulation Algorithm (PGSA) has been applied for the segmentation of such terrestrial images and also for the localization of the deployed sensor nodes. The problem is formulated as a multi-dimensional optimization problem and PGSA has been used to solve it. Furthermore, the proposed method has been compared to other existing evolutionary methods and simulation results show that PGSA gives better performance with respect to both speed and accuracy unlike other techniques in literature.

In this work, we experimentally investigate mass and heat transport phenomena in a modular device while converting a solution salinity difference into a temperature difference. Operations occur under fixed total ambient pressure and without mechanical moving parts, thus realizing a fully static conversion. Provided that a constant salinity gradient can be imposed, the proposed device is able to generate a steady cooling capacity. Here, we purposely operate with environmentally benign and easily accessible sodium chloride water solutions only. A numerical model is finally elaborated, validated and used to explore a wider range of possible device configurations and operating conditions.

Olefin metathesis of ethyl linoleate (EL) was investigated under different conditions of substrate amount, temperature, and catalyst. Second-generation Grubbs catalyst (G2) was used in experiments at 20 and 50 ºC for 24 and 48h, whereas first-generation Grubbs catalyst (G1) and [RuCl₂(PPh₃)₂perhydroazepine] (LN) were used in experiments at 50 ºC for 24h, with the latter also being investigated in the presence or absence of SnCl₂ as co-catalyst. Catalytic products were analyzed for GC-MS and discussed in terms of relative percent of the metathesis products. With G2 as catalyst, GC-MS chromatograms were similar in all the amounts of EL investigated at 50 ºC for 24h, except for ethyl hexadec-9-enoate (compound K), which was obtained with different percentage as a function of EL amount (55% for 2 and 5 mL and 65% for 8 mL). An α,ω-dicarboxylic acid with m/z = 444.00 (compound L) was produced from the experiments at 50 ºC for 24h with similar percentage as a function of EL amount. However, the relative percentage of L changed with the increase of EL volume in the experiments at 20 ºC (ca. 18, 27, and 28%, with 2, 5, and 8 mL of EL, respectively). The olefin metathesis of EL conducted by G1 reached lower selectivity than that conducted by G2 for 24h at 50 ºC. Several intense peaks reached with G1 were similar to those obtained with G2, in addition to new peaks of medium intensity. Compound L showed higher m/z, similar to that presented with G2, but with lower relative proportion in the mixture. LN was inert for olefin metathesis of EL; however, it was activated in the presence of SnCl₂ at 50 ºC for 24h. Different compounds and selectivity as a function of the catalyst type and reaction conditions were obtained.

Soy protein isolate (SPI) based materials are abundant, biocompatible, renewable, and biodegradable. In order to improve the tensile strength (TS) of SPI films, we prepared a novel composite film modified with microcrystalline cellulose (MCC) and metal nanoclusters (NCs) in this research. The effects of the modification of MCC on the properties of SPI-Cu NCs and Zn NCs films were investigated. Attenuated total reflectance-Fourier transformed infrared spectroscopy analyses and X-ray diffraction patterns characterized the strong interactions and reduction of the crystalline structure of the composite films. Scanning electron microscope showed the enhanced cross-linked and entangled structure of modified films. Compared with untreated SPI film, the tensile strength of the SPI-MCC-Cu and SPI-MCC-Zn films increased from 2.91 MPa to 13.95 and 6.52 MPa, respectively. Moreover, the results also indicated their favorable water resistance with higher water contact angle. Meanwhile, the composite films exhibited increased initial degradation temperatures, demonstrating their higher thermostability. The results suggested that MCC could effectively improve the performance of SPI-NCs films, which would provide a novel preparation method for environmentally friendly SPI-based films in the applications of packaging materials.

Detailed information about graft material characteristic is crucial to evaluate their clinical outcomes. The present study evaluates the physicochemical characteristics of two xenografts manufactured on an industrial scale deproteinized at different temperatures (non-sintered and sintered) in accordance with a protocol previously used in sinus lift procedures. It compares how the physico-chemical properties influence the material performance in vivo with a histomorphometric study in retrieved bone biopsies following maxillary sinus augmentation, in 10 clinical cases. X-ray diffraction analysis revealed typical structure of hydroxyapatite for both materials. Both xenografts are porous and exhibit intraparticle pores. Strong differences were observed in terms of porosity, cristallinity, and calcium/phosphate. Histomorphometric measurements on the bone biopsies showed statistically significant differences. The physicochemical assessment of both xenografts in accordance with the protocol developed at industrial scale confirmed that these products present excelent biocompatibilitity, with characteristics similar to natural bone. The sintered HAs xenograft exhibit higher osteoconductivity although were not complete resorbable (30.80±0.88% residual material). On the other hand, the non-sintered HAs xerograft induced about 25.92±1.61% of new bone and almost complete degradation after 6 months implantation. Differences in physico-chemical characteristics found between the two HAs xenograft determine different behavior of this material.

Abnormality of fibroblast growth factor receptors (FGFRs) mediated signaling pathways were frequently found in various human malignancies, making FGFRs hot targets for cancer treatment. To address the consistent need of new chemotype of FGFR inhibitors, here, we started with a hit structure identified from our internal c-Met inhibitor project, and conducted a chemical optimization. After exploring three parts of the hit compound, we finally discovered a new series of pyrrolo[2,3-b] pyrazine FGFR inhibitors, which contain a novel scaffold and unique molecular shape. We believed that our findings can benefit others to further develop selective FGFR inhibitors.

Oxidative and nitrosative stress are a common problem when manipulating gametes in vitro. In vitro development in mammalian embryos is highly affected by culture conditions, especially by reactive oxygen species (ROS) and reactive nitrogen species (RNS), because its absence or over production causes embryo arrest and changes in gene expression. Melatonin in gamete co-incubation during IVF has deleterious or positive effects depending on the concentration used in culture medium, demonstrating the delicate balance that must exist between antioxidant and pro-oxidant activity. Further research is needed to better understand the possible impact of melatonin on the different IVP steps in domestic animals, especially in seasonal breeds where this neuro-hormone system highly regulates its reproduction physiology.

Cyanobacteria are ubiquitous phototrophic bacteria that inhabit diverse environments across the planet. They dominate many eutrophic lakes impacted by excess nitrogen (N) and phosphorus (P) forming dense accumulations of biomass known as cyanobacterial harmful algal blooms or cyanoHABs. Their dominance in eutrophic lakes is attributed to a variety of unique adaptations including N and P concentrating mechanisms, N fixation, colony formation that inhibits predation, vertical movement via gas vesicles, and the production of toxic or otherwise bioactive molecules. While some of these molecules have been explored for their medicinal benefits, others are potent toxins harmful to humans, animals, and other wildlife known as cyanotoxins. In humans these cyanotoxins affect various tissues, including the liver, central and peripheral nervous system, kidneys, and reproductive organs among others. They induce acute effects at low doses in the parts-per-billion range and some are tumor promoters linked to chronic diseases such as liver and colorectal cancer. The occurrence of cyanoHABs and cyanotoxins in lakes presents challenges for maintaining safe recreational aquatic environments and the production of potable drinking water. CyanoHABs are a growing problem in the North American (Laurentian) Great Lakes basin. This review summarizes information on the occurrence of cyanoHABs in the Great Lakes, toxicological effects of cyanotoxins, and appropriate numerical limits on cyanotoxins in finished drinking water.

The effects of environmental media on the corrosion fatigue fracture behavior of 25CrMo steel were investigated. The media include air, and a 3.5 wt.% and a 5.0 wt.% NaCl solutions. Experimental results indicate that the media induces the initiation of corrosion fatigue cracks at multiple sites. The multi-cracking sites cause the changes in the crack growth directions, the crack growth rate during the coupling action of the media and the stress amplitude. The coupling effects are important for engineering applications and research. The probability and predictions of the corrosion fatigue characteristic life can be estimated using the 3-parameter Weibull distribution function.

In urban area, one of the great problem is the rise of temperature, which leads to form the urban heat island effect. This paper refers to the trend of the urban surface temperature extracted from the Landsat images from which to consider changes in the formation of surface urban heat island for the north of Ho Chi Minh city in period 1995-2015. Research has identified land surface temperature from thermal infrared band, according to the ability of the surface emission based on characteristics of normalized difference vegetation index NDVI. The results showed that temperature fluctuated over the city with a growing trend and the gradual expansion of the area of the high-temperature zone towards the suburbs. Within 20 years, the trend of the formation of surface urban heat island with two typical locations showed a clear difference between the surface temperature of urban areas and rural areas with space expansion of heat island in 4 times in 2015 compared to 1995. An extreme heat island located in the inner city has an area of approximately 18% compared to the total area of the region. Since then, the solution to reduce the impact of urban heat island has been proposed, in order to protect the urban environment and the lives of residents in Ho Chi Minh City becoming better

A simple, isocratic and robust RP-HPLC method for the analysis of azithromycin was developed, validated and applied for the analysis of bulk samples, tablets and suspensions. The optimum chromatographic conditions for separation were established as mobile phase comprising of acetonitrile-0.1M KH₂PO₄ pH 6.5-0.1M tetrabutyl ammonium hydroxide pH 6.5-water (25:15:1:59% v/v/v/v) delivered at a flow rate of 1.0 ml/min. The stationary phase consisted of reverse-phase XTerra^® (250 mm× 4.6 mm i.d., 5 µm particle size) maintained at a temperature of 43 °C with a UV detection at 215 nm. The method was found to be linear in the range 50-150% (r²=0.997). The limits of detection and quantification were found to be 0.02% (20 µg) and 0.078% (78 µg) respectively with a 100.7% recovery of azithromycin. Degradation products of azithromycin in acidic and oxidative environments at 37 °C were resolved from the active pharmaceutical ingredient and thus the method is fit for the purpose of drug stability confirmation.

The measurement of discrimination in employment is a key variable in understanding dynamics in the nature of and change in ‘race relations’. Measuring such discrimination using ‘situation’ and ‘correspondence’ tests was influenced by John Rex’s sociological analyses, begun in in England in the 1960s, and replicated in Europe and America in later decades. This literature is reviewed, and the methodologies of testing for employment discrimination are discussed. Recent work in Britain and The Netherlands is considered in detail in the light of changing social structures, and the rise of Islamophobia. Manchester, apparently the city manifesting the most discrimination in Britain, is considered for a special case study, with a focus on one individual, a Muslim woman seeking intermediate level accountancy employment. Her vita was matched with that of a manifestly indigenous, white Briton. Submitted vitas (to 1,043 potential employers) indicated significant discrimination against the Muslim woman candidate. Results are discussed within the context of Manchester’s micro-sociology, and Muslim women’s employment progress in broader contexts, drawing on our work in Jordan and Palestine. We conclude with the critical realist comment that the “hidden racism” of employment discrimination shows that capitalist societies continue to be institutionally racist, and the failure to reward legitimate aspirations of minorities pushes ethnic minorities into a permanent precariat, with implications for social justice and social control, which denies minority efforts to “integrate” in society’s employment systems.

The difficult current environmental situation, caused by construction industry residues containing ceramic materials could be improved by using these materials as recycled aggregates in mortars, with their processing causing a reduction in their use in landfill, contributing to recycling and also minimizing the consumption of virgin materials. Although some research is currently being carried out into recycled mortars, little is known about their stress-strain (σ-ε); therefore this work will provide the experimental results obtained from recycled mortars with recycled ceramic aggregates (with contents of 0, 10, 20, 30, 50 and 100%), such as: the density, the compression strength, as well as the σ-ε curves representative of their behavior. The values obtained from the analysis process of the results are those of: σ (elastic ranges and failure maximum), ε (elastic ranges and failure maximum), and Resilience and Toughness; in order to finally obtain, through numerical analysis, the equations to predict their behavior (related to their recycled content). At the end of the investigation it is established that mortars with recycled ceramic aggregate contents of up to 20% could be assimilated just like mortars with the usual aggregates, and the prediction equations produced could be used in cases of similar applications.

Circulating tumor cells (CTC) have shown to be prognostic in advanced colorectal cancer (advCRC), but their value for predicting response to treatment or as a source of molecular data is debated. We compared CellSearch® (Janssen Diagnostics, LLC) and IsoFlux^TM (Fluxion Biosciences Inc, South San Francisco, CA) systems for the enumeration of CTC in patients with newly diagnosed advCRC (group 1; n=34). Using castPCR^TM we studied KRAS status in CTC isolated with IsoFlux^TM and compared it with that of the primary tumor in patients from group 1 and in KRAS wild-type (KRAS^WT) patients with progressive disease (group 2; n=22). Median number of CTC detected with CellSearch® (groups 1 and 2) was 1 (range: 0-78) and with IsoFlux^TM (group 1) was 8 (range: 0-419), showing a modest correlation (r=0.345, P=0.036), which improved if lung metastases (r=0.805, P=0.016) or if lung and liver metastases were present (r=0.812, P=0.05). A Bland-Altman plot showed that the higher the number of CTC detected the larger the difference between both methods in favor of IsoFlux^TM. After a median follow-up since CTC collection of 16 months (range: 1-30) CellSearch® ≥ 3 CTC (HR 2.77, 95% CI 0.77-9.95) and IsoFlux^TM ≥ 11 CTC (HR 4.14, 95% CI 1.05-16.19) were established as the best cutoff points for predicting survival. Using castPCR^TM we found KRAS mutations in CTC in 4 out of 8 patients from group 1 and in 2 out of 3 patients from group 2. None of these mutations were found in the primary tumor using standard methods, possibly reflecting intratumor heterogeneity or treatment selection pressure. We conclude that IsoFlux^TM is more efficient than CellSearch® in the isolation of CTC in patients with advCRC, achieving, in a majority of cases, the established minimum of CTC for castPCR^TM-based genetic analyses.

The dispersal potential of crown-of-thorns starfish (CoTS) larvae is important in understanding both the initiation and spread of population outbreaks, and is fundamentally dependent upon how long larvae can persist while still retaining the capacity to settle. This study quantified variation in larval survivorship and settlement rates for CoTS maintained at three different chlorophyll concentrations (0.1, 1.0 or 10.0 µg.L^-1), achieved by varying densities of single-celled flagellate phytoplankton, Proteomonas sulcata. Based on the larval starvation hypothesis we expected that low to moderate algal concentrations would significantly constrain both survival and settlement. CoTS larvae were successfully maintained for up to 50 days post-fertilization, but larval survival differed significantly between treatments. Survival was greatest at intermediate (1.0 µg.L^-1) chlorophyll concentrations, and lowest at highest (10.0 µg.L^-1) chlorophyll concentrations. Rates of settlement were also highest at intermediate (1.0 µg.L^-1) chlorophyll concentrations and peaked at 22 days post-fertilization. Peak settlement was delayed at low chlorophyll concentrations, probably reflective of delayed development, but there was no evidence of accelerated development at high chlorophyll concentrations. CoTS larvae were capable of settling 17-43 days post-fertilization, but under optimum conditions with intermediate chlorophyll concentrations, peak settlement occurred at 22 days post-fertilization. Moderate increases in nutrient concentrations and algal densities may increase the number of CoTS that effectively settle, but are unlikely to influence dispersal dynamics.

PZT-Poly(vinylidene fluoride) composites were prepared by hot-pressing method. Before addition, PZT particles were firstly modified with two different coupling agents. The micromorphology, microstructure, dielectric properties, and piezoelectric properties of the composites were characterized and investigated. Results indicated that PZT particles were homogeneously dispersed in the PVDF matrix by the addition of coupling agents. The electric properties of PZT-PVDF composites with NDZ-101 were the best. Especially when the volume ratio of the titanate coupling agent NDZ-101 was 1%, the piezoelectric strain constant d33 of PZT-PVDF composites reached maximum value 19.23pC/N; its relative dielectric constant εr was 67.45; at the same time its dielectric loss tanδ was 0.0766.

Optimizing the NACA0015 airfoil which is widely applied in small-scale vertical axis wind turbine to make it has a better aerodynamic performance. In the optimization process, using CST parameterization method to perturb the airfoil geometry, the thickness and camber of the airfoil are selected as the constraint, and the value of the maximum tangential force coefficient is chosen as the objective function, the genetic algorithm based on non-dominated sorting (NSGA-II)is selected as an optimization method, calculates the aerodynamic performance of the airfoil by applying the approach of combining XFOIL program and Viterna-Corrigan post-stall mode ,and establishes the optimizing process by the optimization software modefrontier for NACA0015 airfoil’s muti-point optimization, validate the airfoil’s performance with CFD finally. The result illustrates that, by comparing with the NACA0015 airfoil, the optimized airfoil’s lift to drag ratio is improved over a wide range of attack angles, the stall performance is more gentle. The maximum lift coefficient, the maximum lift-drag ratio and the maximum tangential force coefficient are increased by 7.5%,9 and 8.87%, respectively. The optimized airfoil has a wide variable condition performance, more suitable for the operating conditions of a vertical axis wind turbine. Finally, predict the rotor efficiency with optimized airfoil and NACA0015 airfoil for different tip speed ratios and different solidities with multiple streamtube model, the result shows the rotor with optimized airfoil has a higher efficiency.

Monitoring and protecting flowing watercourses is a complex and challenging task that requires the collaboration and coordination of various stakeholders such as governments, industries, farmers, consumers and environmental groups. The study of the dynamics of the concentration of polluting factors and especially the concentrations of heavy metals and highlighting a seasonal variation is a necessary element from this point of view. In this article, we present the results of our analyzes carried out in two measurement campaigns executed in 10 monitoring points along the Danube River, between Braila city and Isaccea city in the pre-deltaic area, during the summer season and autumn season 2022. The importance of this area is given by the fact that the Dan-ube Delta is part of the UNESCO heritage and the monitoring of polluting factors is a necessity in the desire to protect this area. The data measured during the July and August 2022 campaign co-vers a wide range of chemical species: Phosphate, CCO, CBO5, NH4+, N-NO2, N-NO3-, N-Total, P-PO4 3-, SO42-, Cl-, phenols, as well as metals with a harmful effect: Aluminum, Arsenic, Cad-mium, Chromium, Iron. The study includes an evaluation based on the statistical approach of the results to highlight the significant correlations and differences identified between the two data sets. Next, to highlight the obtained results, a numerical model was considered using HEC-RAS and ESRI ArcGis applications in a two-dimensional unsteady flow model in order to get the non-homogenous concentrations’distributions in the studied area. These two-dimensional models have been less studied in the specialized literature. In this way, interesting results could be ob-tained and prediction methods regarding the dynamics of metal concentrations could be struc-tured. The data obtained was used for the terrain model from the USGS service and the flows of the Danube and its two tributaries were simulated using the data provided by the national ser-vices. In this work, we present the results obtained for the dynamics of the concentrations of the metals Aluminum, Arsenic, Cadmium, Chromium and Iron and the evaluation of the specific ab-sorption coefficients for the explanation and correlation with the results of the measurements. The study is part of a more complex project in which the spatio-temporal distribution of the polluting factors in the water was evaluated and the habitats in the study area were inventoried - especially those of community interest. the aspects related to the influence of the distribution of polluting factors on the state of health will be the subject of another article.

Background: This study aimed to estimate the prevalence of sexualized drug use (SDU) in gay, bisexual, and other men who have sex with men living with HIV (HIV+GBMSM) in Madrid during 2019/2020 and compare it with data from 2016/2017. Methods: We analysed the frequency of SDU in a sample of HIV+GBMSM attending HIV clinics, who participated in an anonymous online survey regarding sexual behaviour and recreational drug use. The association between SDU, sexual risk behaviours, and STIs was evaluated. The methodology employed in the present study(U-SEX-2) in 2019/2020 was consistent with that of a previous study(U-SEX-1) in 2016/2017. Results: The study included 424 HIV+GBMSM, with a mean age of 40(10.43) years. Overall, 94% (396) reported being sexually active. Additionally, 33% (140) had been diagnosed with an STI within the previous year. Moreover, 54% (229) had used drugs in the last year, 25% (107) engaged in SDU, and 15% (17) reported engagement in slamsex. After adjusting for confounding factors, SDU was associated with STIs, fisting, unprotected anal intercourse, and having &gt; 24 sexual partners in the last year. According to the DUDIT test scores, 76% (81) probably had problematic drug use (≥6 points), and 5% (8) probable drug dependence (≥25 points). When comparing the U-SEX-1(2016/2017) data with the U-SEX-2(2019/2020) data, no significant differences were found in the proportion of participants practicing SDU or slamsex. Conclusion: The prevalence of SDU among HIV+GBMSM has remained high in recent years and without significant changes. We observed a clear association between SDU, high-risk sexual behaviors, STIs, and the risk of drug related problems.

Encephalitis is a condition with a variety of etiologies, clinical presentations and degrees of severity. The causes of these disorders include both neuroinfections and autoimmune diseases in which host antibodies are pathologically directed against self antigens. In autoimmune encephalitis, autoantibodies are expressed in the central nervous system. The incidence of this disease is approximately 4% of all reported cases of encephalitis. Autoimmune encephalitis can be induced by antibodies against neuronal surface antigens such as N-methyl-D-aspartate-activated glutamate receptors (NMDAR), ⍺-amino-3-hydroxy-5-methyl-4-isoxazole propionate receptors (AMPAR) or gangliosides GQ1b, DPPX, CASPR2, LGI1, as well as by antibodies against neuronal intracellular antigens. The paper presents a number of both mental and neurological symptoms of autoimmune encephalitis. Moreover, the coexistence of psychoses, neoplastic diseases and the methods of diagnosing autoimmune encephalitis are discussed. Attention was also drawn to the fact that early diagnosis, as well as early initiation of targeted treatment, increases the chance of a successful course of the therapeutic process.

Non-enzymatic thiol addition into α,ß-unsaturated carbonyl system is associated with several biological effects. In vivo, the reactions can form small-molecule thiol (e.g., glutathione) or protein thiol adducts. The reaction of two synthetic (4’-methyl- and 4’-methoxy substituted) cyclic chalcone analogs with glutathione and N-acetylcysteine was studied by HPLC-UV method. The selected compounds displayed in vitro cancer cell cytotoxicity (IC50) of different orders of magnitude. The structure of the formed adducts was confirmed by HPLC-MS. The incubations were performed under three different pH conditions (pH 3.5/3.8, 6.3/6.7, and 8.0/7.4). The chalcones intrinsically reacted with both thiols under all incubation conditions. The initial rates and compositions of the final mixtures depended on the substitution and the pH. The frontier molecular orbitals and the Fukui function were carried out to investigate the effects on open-chain and seven-membered cyclic analogs. Furthermore, machine learning protocols were used to provide more insights into physicochemical properties and to support the different thiol-reactivity. HPLC analysis indicated diastereoselectivity of the reactions. The observed reactivities do not directly relate to the different in vitro cancer cell cytotoxicity of the compounds.

Multi-Alignment method coupled with phylogenetic analysis we disclosed the Nsp9 and Nsp10 non-structural proteins of Corona Virus as rRNA RlmH/K methyltransferases with similarities with bin recombinase and int-core integrase fold. Further, Nsp9 has similarities to S8 ribosomal protein and Nap10 has similarity to S10 ribosomal protein. Previously, we showed Nsp13, Nsp14, Nsp15 and Nsp16 are also different types of rRNA RlmE/N and Cfr-like methyltransferases-ribonuclease with RNA helicase domains. Two domains of Nsp13 astonishingly have similarities to ribosomal proteins L6 and L9. Taken together, Nsp9/10 and Nsp13-16 proteins could mimic host ribosome assembly and also could methylate rRNA of mitobibosome preventing mitochondrial protein synthesis and oxidative phosphorylation. Low ATP synthesis causes lowering blood pressure following coma but very ATP concentration (1-10nM) surely induces platelets aggregation through vWA, collagen and GpIIb/IIIa proteins followed by fibrin formation and blood clotting as recently have seen in the lung of many Corona virus infected patients. We have also postulated that two polyproteins itself resemble like 28S and 38S mitoribosome subunits and compete with rRNAs inhibiting the ribosome turnover and new protein synthesis due to their similarities with many ribosomal proteins. Such finding may be valuable in computer-based novel drug design against Corona virus.

In this research, assume a SuperHyperGraph. Then an extreme SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperEdges such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge; a neutrosophic SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperEdges such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge; an extreme SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the extreme SuperHyperPolynomial contains the coefficients defined as the number of the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperEdges such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge and the power is corresponded to its coefficient; a neutrosophic SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the neutrosophic SuperHyperPolynomial contains the neutrosophic coefficients defined as the neutrosophic number of the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperEdges such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge and the neutrosophic power is neutrosophicly corresponded to its neutrosophic coefficient; an extreme R-SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperVertices such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge; a neutrosophic R-SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge; an extreme R-SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the extreme SuperHyperPolynomial contains the coefficients defined as the number of the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperVertices such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge and the power is corresponded to its coefficient; a neutrosophic R-SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the neutrosophic SuperHyperPolynomial contains the neutrosophic coefficients defined as the neutrosophic number of the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge and the neutrosophic power is neutrosophicly corresponded to its neutrosophic coefficient. Assume a SuperHyperGraph. Then $\delta-$SuperHyperMatching is a maximal of SuperHyperVertices with a maximum cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ there are $|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta;$ and $ |S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an $\delta-$SuperHyperOffensive. And the second Expression, holds if $S$ is an $\delta-$SuperHyperDefensive; a neutrosophic $\delta-$SuperHyperMatching is a maximal neutrosophic of SuperHyperVertices with maximum neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S$ there are: $|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta;$ and $ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a neutrosophic $\delta-$SuperHyperOffensive. And the second Expression, holds if $S$ is a neutrosophic $\delta-$SuperHyperDefensive It's useful to define a ``neutrosophic'' version of a SuperHyperMatching . Since there's more ways to get type-results to make a SuperHyperMatching more understandable. For the sake of having neutrosophic SuperHyperMatching, there's a need to ``redefine'' the notion of a ``SuperHyperMatching ''. A basic familiarity with Extreme SuperHyperMatching theory, SuperHyperGraphs, and Neutrosophic SuperHyperGraphs theory are proposed.

Elovanoids (ELV) are novel lipid mediators synthesized from very long-chain (VLC) omega-3 (n-3) polyunsaturated fatty acids (PUFA), particularly docosahexaenoic acid (DHA) or eicosa-pentaenoic acid (EPA), by the elongase enzyme ELOVL4. ELV have been shown to play a funda-mental role in maintaining brain and retina function, neuroprotection, maintaining the skin's permeability barrier, and sperm function, among other important cellular processes. Furthermore, the methyl ester or sodium salt of ELV-N32 and ELV-N34 have been found to be efficient in re-duced infarct volumes, promoting cell survival and decreasing the alteration of the neurovascular unit in a model of ischemia due to occlusion of the middle cerebral artery. Their bioactivity in-cludes enhancing of anti-apoptotic and pro-survival protein expression combined with the downregulation of pro-apoptotic proteins. House dust mite (HDM) is the most prevalent indoor allergen, and HDM exposure is frequently the cause of allergic respiratory disease, including aller-gic rhinitis and allergic asthma in HDM sensitized individuals. In our study, human nasal epithe-lial cells (HNEpC) were used as an in vitro model for allergy. The cells were challenged with HDM (mixture of Dermatophagoides farinae and D. pteronyssinus extract), with or without treat-ment with ELV-34. Phosphate-buffered saline (PBS) (vehicle) and ELV-34 (500 nM) alone were used as the control. Our findings show that ELV-34 promotes cell viability and reduces cytotoxi-city upon HDM sensitization of HNEpC. ELV-34 treatment significantly reduces the levels of IL-6, IL-1β, IL-8, VEGF, ICAM1, CXCL1 and CCL2, restored the IL-10 level and diminishes the induc-tion of the transcription of inflammatory and senescence genes in HNEpC. Our data also shows that HDM triggered the expression of several key genes in human nasal epithelial cells, including autophagy, unfolded protein response (UPR), Matrix metalloproteinases (MMPs), senescence and inflammation markers. Together, our data reveal a novel pro-homeostatic and cell-protective li-pid-signaling mechanism in nasal epithelial cells that envision novel potential therapeutic targets for the treatment of allergies.

The search for molecular biosignatures at the surface of Mars is complicated by an intense irradiation in the mid- and near- ultraviolet (UV) spectral range for several reasons: (i) many astrobiologically relevant molecules are electronically excited by efficient absorption of UV radiation and rapidly undergo photochemical reactions; (ii) even though the penetration depth of UV radiation is limited, aeolian erosion continually exposes fresh material to radiation; and (iii) UV irradiation generates strong oxidants such as perchlorates that can penetrate deep into soils and cause subsurface oxidative degradation of organics.As a consequence, it is crucial to investigate the effects of UV radiation on organic molecules embedded in mineral matrices mimicking the martian soil, in order to validate hypotheses about the nature of the organic compounds detected so far at the surface of Mars by the Curiosity rover, as well as organics that will be possibly found by the next rover missions Mars 2020 and ExoMars 2020. In addition, studying the alteration of possible molecular biosignatures in the martian environment will help to redefine the molecular targets for life detection missions and devise suitable detection methods.Here we report the results of mid-UV irradiation experiments of Mars soil analog samples obtained adsorbing relevant organic molecules on a clay mineral that is quite common on Mars, i.e. montmorillonite, doped with 1 wt% of magnesium perchlorate. Specifically, we chose to investigate the photostability of a plausible precursor of the chlorohydrocarbons detected on Mars by the Curiosity rover, namely phthalic acid, along with the biomarkers of extant life L-phenylalanine and L-glutamic acid, which are proteomic amino acids, and adenosine 5’-monophosphate, which is a nucleic acid component.We monitored the degradation of these molecules adsorbed on montmorillonite through in situ spectroscopic analysis, investigating the reflectance properties of the samples in the Near InfraRed (NIR) spectral region. Such spectroscopic characterization of molecular alteration products provides support for two upcoming robotic missions to Mars that will employ NIR spectroscopy to look for molecular biosignatures, through the instruments SuperCam on board Mars 2020, ISEM, Ma_Miss and MicrOmega on board ExoMars 2020.