The study carried out by simulation, concerns the thermal behavior of an office building’s solar fresh air cooling system, based on a LiBr-H₂O absorption chiller in different climatic conditions. The coefficient of performance (COP) and the solar fraction were considered performance parameters and were analyzed with respect to the operating limits: risk of crystallization and maintaining at least a minimum degassing zone. A new correlation between the required solar hot temperature and the cooling water temperature was established and then embedded in another new correlation between the COP and the cooling water temperature that was used in simulations during the whole cooling season corresponding to each location. It was found that: the solar hot water should be maintained in the range of (80-100) °C depending on the cooling water temperature, the COP of the solar LiBr-H₂O absorption chiller with or without cold storage tank can reach (76.5-82.4) % depending on the location, and the solar fraction can reach (29.5-62.0) % without cold storage tank and can exceed 100 % with cold storage tank, the excess cooling power being available to cover other types of cooling loads: through the building envelope, from lighting, from occupants, etc.

Model selection and model averaging have been the popular approaches in handling modelling uncertainties. Fan and Li(2006) laid out a unified frame work for variable selection via penalized likelihood. The tuning parameter selection is vital in the optimization problem for the penalized estimators in achieving consistent selection and optimal estimation. Since the OLSpost-LASSO estimator by Belloni and Chernozhukov (2013), few studies have focused on the finite sample performances of the class of OLS post-penalty estimators with the tuning parameter choice determined by different tuning parameter selection approaches. We aim to supplement the existing model selection literature by studying such a class of OLS post-selection estimators. Inspired by the Shrinkage Averaging Estimator (SAE) by Schomaker(2012) and the Mallows Model Averaging (MMA) criterion by Hansen (2007), we further propose a Shrinkage Mallows Model Averaging (SMMA) estimator for averaging high dimensional sparse models. Based on the Monte Carlo design by Wang et al. (2009) which features an expanding sparse parameter space as the sample size increases, our Monte Carlo design further considers the effect of the effective sample size and the degree of model sparsity on the finite sample performances of model selection and model averaging estimators. From our data examples, we find that the OLS post-SCAD(BIC) estimator in finite sample outperforms most of the current penalized least squares estimators as long as the number of parameters does not exceed the sample size. In addition, the SMMA performs better given sparser models. This supports the use of the SMMA estimator when averaging high dimensional sparse models.

The use of small Unmanned Aircraft Systems (sUAS ) as platforms for data capture has rapidly increased in recent years. However, while there has been significant investment in improving the aircraft, sensors, operations, and legislation infrastructure for such, little attention has been paid to supporting the management of the complex data capture pipeline sUAS involve. This paper reports on the outcomes of a four-year-long community-engagement-based investigation into what tools, practices, and challenges currently exist for particularly researchers using sUAS as data capture platforms. The key results of this effort are: (1) sUAS captured data – as a set that is rapidly growing to include data in a wide range of Physical and Environmental Sciences, Engineering Disciplines, and many civil and commercial use cases – is characterised as both sharing many traits with traditional remote sensing data and also as exhibiting – as common across the spectrum of disciplines and use cases – novel characteristics that require novel data support infrastructure. And (2), given this characterization of sUAS data and its potential value in the identified wide variety of use case, we outline eight challenges that need to be addressed in order for the full value of sUAS captured data to be realized. We then conclude that there would be significant value gained and costs saved across both commercial and academic sectors if the global sUAS user and data management communities were to address these challenges in the immediate to near future, so as to extract the maximal value of sUAS captured data for the lowest long-term effort and monetary cost.

In this paper, we introduce the (ρ,q)-analogue of the p-adic factorial function. By utilizing some properties of (ρ,q)-numbers, we obtain several new and interesting identities and formulas. We then construct the p-adic (ρ,q)-gamma function by means of the mentioned factorial function. We investigate several properties and relationships belonging to the foregoing gamma function, some of which are given for the case p = 2. We also derive more representations of the p-adic (ρ,q)-gamma function in general case. Moreover, we consider the p-adic (ρ,q)-Euler constant derived from the derivation of p-adic (ρ,q)-gamma function at x = 1. Furthermore, we provide a limit representation of aforementioned Euler constant based on (ρ,q)-numbers. Finally, we consider (ρ,q)-extension of the p-adic beta function via the p-adic (ρ,q)-gamma function and we then investigate various formulas and identities.

Although many devices have recently been proposed for pressure regulation and energy harvesting in water distribution and transport networks, very few applications are still documented in the scientific literature. A new in-line Banki turbine with positive outflow pressure and a mobile regulating flap, named PRS, was installed and tested in a real water transport network for pressure and discharge regulation. The PRS turbine was directly connected to a 55 kW asynchronous generator with variable rotational velocity, coupled to an inverter. The start-up tests showed how automatic adjustment of the flap position and the impeller velocity variation are able to change the characteristic curve of the PRS according to the flow delivered by the water manager or to the pressure set-point assigned downstream or upstream of the system, still keeping good efficiency values in hydropower production.

A decade ago, non-radiative wireless power transmission reemerged a promising alternative to deliver electrical power to devices where a physical wiring proved to be unfeasible. However, conventional coupling-based approaches are neither scalable nor efficient when multiple devices are involved, as they are restricted by factors like coupling and external environments. Zenneck waves are excited at interfaces, like surface plasmons and have the potential to deliver electrical power to devices placed on a conducting surface. Here, we demonstrate, efficient and long range delivery of electrical power by exciting non-radiative waves over metal surfaces to multiple loads.Our modeling and simulation using Maxwells equation with proper boundary conditions shows Zenneck type behavior for the excited waves and are in excellent agreement with experimental results. In conclusion, we physically realize a radically different power transfer system, based on a wave, whose existence has been fiercely debated for over a century.

Nowadays, one of the biggest concern of human being is greenhouse gas emission, especially carbon dioxide emission in developed and under-developing countries. In this study, connectionist models including LSSVM (Least Square Support Vector Machine) and evolutionary methods are employed for predicting the amount of CO₂ emission in six Latin American countries, i.e., Brazil, Mexico, Argentina, Peru, Chile, Venezuela, and Uruguay. The studied region is modelled based on the available input data in terms of Million tons including oil (Million tons), gas (Million tons oil equivalent), coal (Million tons oil equivalent), $R_{ew}$ (Million tons oil equivalent), and Gross Domestic Product (GDP) in terms of billion US dollars.} Moreover, the available patents in the fields of climate change mitigation in six Latin American countries namely Brazil, Mexico, Argentina, Peru, Chile, Venezuela, and Uruguay has been reviewed and analyzed. The results show that except Venezuela, all other mentioned countries have invested in renewable energy R&D activities. Brazil and Argentina have the highest share of renewable energies which account for 60% and 72% respectively.

Owing to fascinating applications of ZnO in modern devices, it is interesting to explore its more features for future devices. Hence, herein, we have synthesized the high quality ZnO spherical nanoparticles (SNPs) through a facile green synthesis route and robust structural and biomedical studies are carried out. Hexagonal phase with 93.2% crystallinity was confirmed through XRD analysis. ZnO nanoparticles were tested for their bioactivities both in vivo (acute cytotoxicity test) and in vitro (Anti-cancer activities on liver (HepG2) and cervical (Hela) cancer cell lines, stimulatory/inhibitory effects on normal rat splenic cells and hemolytic effects on red blood cells). Results showed that ZnO SNPs has no cytotoxic effects on vital organ like liver and has no hemolytic action on red blood cells. ZnO SNPs showed inhibitory consequence on normal rat splenic cells growth at all tested concentrations. ZnO nanoparticles showed an inhibitory effect on HepG2 cell line. While showed stimulatory effect on Hela cell line. Current study presents the synthesized ZnO SNPs as highly applicable in bio-optoelectronics.

When focusing on materials science in civil engineering, the current trend is to investigate the use of innovative solutions in order to enhance thermal and energy performances. This trend is amplified with the need for a sustainable development strategy for the construction sector. This paper assesses the integration of a Phase Change Material (PCM) in cement intended for building construction. The key characteristic of PCMs is their capacity to absorb energy and restore it. In building construction, this feature could be harnessed to save energy by incorporating PCMs in the materials used. In this study, passive integration of PCM in cement was tested and thermal properties of such an integration was assessed. The results provide insights into how PCMs affect cement as part of the concrete mixture, thus identifying the contribution of PCM-based cements in concrete mixtures.

(-)-Zeylenone is a promising cytotoxic agent，which is a natural product isolated from Uvaria grandiflora Roxb. Though substantial antitumor mechanism has been researched , little has focused on its enantiomer (+)-Zeylenone.This article will try to find a gram scale synthesis method of (+)-Zeylenone and explain the structure-activity relationship of this kind of compound. Total synthesis of (+)-zeylenone was completed in 13 steps with quinic acid as starting material in 8.8% overall yield. The highlight of the route was the control of the three carbon’s chirality by clever use of single step dihydroxylation under the direction of the key C-3 chirality. In addition, zeylenone derivatives were designed and synthesized and their antitumor activity were evaluated against three human cancer cell lines using the CCK8 assay. Structure-activity relationship suggested compounds with both two absolute configurations exhibited good activity. Besides, hydroxyls at C-1/2 position were crucial for the activity and esterification of C-1 hydroxyl with large groups made the activity disappeared. Hydroxyl at C-3 position was also important as proper ester substituent could increase the potency.

The goal of the project was to gain an understanding of the secondary school youth experience with food literacy and school gardens on their mental well-being. Over the course of five months, sixteen youth participated in a photovoice research project in which they expressed their personal experiences about food and gardening through photography and writing. The aspects of secondary school youths’ life experiences affected by exposure to food literacy and school gardens and their impact upon their well-being were identified. These included emotions and feelings, having a safe place, nutrition and relaxation. The youth explicitly connected relaxation with the themes of love and connectedness, growing food, garden as a place, cooking, and food choices. This was linked to nature, beauty, environment and sustainability. Youth clubs or groups were also identified as a key enabler for connection. Youth shared their food literacy experiences, observing that their engagement improved some aspect of their mental well-being. They identified food literacy and gardens as being the most important to mental well-being including: connecting, personal health and personal growth. The youth recognized that connecting comes from having community, relationships and respect. Fostering opportunities for food literacy such as growing and preparing food contributes to resiliency.

Organisms are adapted to each other and the environment, not as tradition would have it, because natural selection made them that way, but because there is inbuilt striving towards stability and equilibrium. A General Theory of Behaviour connects imagery, affect and action with the central executive system we call Consciousness. The General Theory is founded on the assumption that the primary motivation of all of Consciousness and intentional behaviour is Psychological Homeostasis. Psychological homeostasis is as important to the organisation of mind and behaviour as Physiological Homeostasis is to the organisation of bodily systems. Consciousness processes quasi-perceptual images independently of the input to the retina and sensorium. Consciousness is the “I-Am” control centre for integration and regulation of (my) thoughts, (my) feelings and (my) actions with (my) conscious mental imagery as foundation stones. Imagery vividness, a combination of clarity and liveliness, is essential to imagining, remembering, thinking, predicting, planning and acting. Assessment of vividness using introspective report is validated by objective means such as fMRI. A significant body of work shows that vividness of visual imagery is determined by the similarity of neural responses in imagery to those occurring in perception of actual objects and performance of activities. I am Conscious, therefore I am.

The assimilation of Soil Moisture and Ocean Salinity (SMOS) data into the ECMWF (European Centre for Medium Range Weather Forecasts) H-TESSEL (Hydrology revised - Tiled ECMWF Scheme for Surface Exchanges over Land) model is presented. SMOS soil moisture (SM) estimates have been produced specifically by training a neural network with SMOS brightness temperatures as input and H-TESSEL model SM simulations as reference. This can help the assimilation of SMOS information in several ways: (1) the neural network soil moisture (NNSM) data have a similar climatology to the model, (2) no global bias is present with respect to the model even if regional differences can exist. Experiments performing joint data assimilation (DA) of NNSM, 2 metre air temperature and relative humidity or NNSM-only DA are discussed. The resulting SM was evaluated against a large number of in situ measurements of SM obtaining similar results to those of the model with no assimilation, even if significant differences were found from site to site. In addition, atmospheric forecasts initialized with H-TESSEL runs (without DA) or with the analysed SM were compared to measure of the impact of the satellite information. Although, NNSM DA has an overall neutral impact in the forecast in the Tropics, a significant positive impact was found in other areas and periods, especially in regions with limited in situ information. The joint NNSM, T2m and RH2m DA improves the forecast for all the seasons in the Southern Hemisphere. The impact is mostly due to T2m and RH2m, but SMOS NN DA alone also improves the forecast in July- September. In the Northern Hemisphere, the joint NNSM, T2m and RH2m DA improves the forecast in April-September, while NNSM alone has a significant positive effect in July-September. Furthermore, forecasting skill maps show that SMOS NNSM improves the forecast in North America and in Northern Asia for up to 72 hours lead time.

It's challenging to achieve robust lane detection depending on single frame when considering complicated scenarios. In order to detect more credible lane markings by using sequential frames, a novel approach to fusing vision and Inertial Measurement Unit (IMU) is proposed in this paper. The hough space is employed as the space where lane markings are stored and it's calculated by three steps. Firstly, a basic hough space is extracted by Hough Transform and primary line segments are extracted from it. In order to measure the possibility about line segments belong to lane markings, a CNNs based classifier is introduced to transform the basic hough space into a probabilistic space by using the networks outputs. However, this probabilistic hough space based on single frame is easily disturbed. In the third step, a filtering process is employed to smooth the probabilistic hough space by using sequential information. Pose information provided by IMU is applied to align hough spaces extracted at different times to each other. The final hough space is used to eliminate line segments with low possibility and output those with high confidence as the result. Experiments demonstrate that the proposed approach has achieved a good performance.

According to research, we have learned that Mg and TiO2 are new types material of marine protective coatings. We found that the addition of Mg can improve the performance of Zn-Al coating passivation film, and TiO2 has excellent photocatalytic self-cleaning performance. In this paper Zn-Al pseudo alloy coating was prepared by cold spray technique, and Zn-Al-Mg-TiO2 pseudo alloy composite coating was prepared by adding Mg and nano-TiO2. The effects of Mg and TiO2 to the marine protective properties of Zn-Al coatings were studied by friction and wear test, dynamic salt water corrosion test, electrochemical test, scanning electron microscope(SEM), energy dispersive spectrometer(EDS) and super deep scene 3D microscope. The results show that the addition of Mg and nano-TiO2 not only fills the gap of the coating and improves the density of the coating, but also generates grid-like flocculent corrosion products on the surface of the coating which can gather other corrosion products to improve the density of corrosion products, reduce the friction coefficient and corrosion rate of the coating surface, effectively prevent the invasion of Cl- in solution, and improve the wear and corrosion resistance of the coating.

The way in which a perforated structure is formed has attracted much interest in the porous membrane research community. This novel structure gives materials an excellent antifouling property as well as a low operating pressure and other benefits. Unfortunately, the current membrane fabrication methods usually involve multi-step processes and the use of organic solvents or additives. Our study is the first to offer a way to prepare perforated membrane by using a physical foaming technique with CO₂ as the blowing agent. We selected thermoplastic polyurethane (TPU) as the base material because it is a biocompatible elastomer with excellent tensility, high abrasion resistance, and good elastic resilience. Various processing parameters, which included the saturation pressure, the foaming temperature, and the membrane thickness, were applied to adjust the TPU membrane’s perforated morphology. We proposed a possible formation mechanism of the perforated membrane. The as-prepared TPU membrane had good mechanical properties with a tensile strength of about 5 MPa and an elongation at break above 100%. Such mechanical properties make this novel membrane usable as a self-standing filter device. In addition, its straight-through channel structure can separate particles and meet different separation requirements.

Mastectomy and hysterectomy with bilateral salpingo-oophorectomy are the first steps in surgical female-to-male (FtM) gender affirmation. We aimed to critically review our experience with the combined approach of hysterectomy/salpingo-oophorectomy and bilateral mastectomy and to focus on intra- and postoperative complications. In a retrospective cohort study, 108 consecutive patients were included who underwent combined hysterectomy, bilateral salpingo-oophorectomy, and bilateral mastectomy in a single operating session, between November 1998 and December 2017. Main outcome measures were operating times and intra- and postoperative courses, including major and minor adverse events. Patients were 28.9 ± 6.7 years of age and revealed a mean BMI of 24.4 ± 4.1 kg/m2. The median total operating time for patients without additional procedures was 237.6 ± 110.3 minutes. Taking all intra- and postoperative complications together, there were eight (7.4%) and 21 (19.4%) patients with major and minor complications, respectively. The most frequent complication was breast hematoma (18/108, 16.7%). There was a completely uneventful intra- and postoperative course in 82 cases (75.9%). In conclusion, for FtM reassignment surgery, the combined hysterectomy / salpingo-oophorectomy and bilateral mastectomy in a single operating session seems to be feasible and safe.

The detection of temporary color steel buildings and the analysis of their spatiotemporal patterns and characteristics are of great importance in many developing cities, because areas densely distributed with color steel buildings are usually problematic regions with high population density, sustainable development and risk level, which are challenging for local governments. Using the high-resolution satellite images of the Anning District, Lanzhou City, China as the case study, this paper first extracts the information of the color steel buildings for two different periods. Then the spatiotemporal distributional characteristics of the color steel buildings are analyzed, both at small scale (temporary buildings) and large scale (planthouses, warehouses, etc.). Finally, this paper utilizes kernel density estimation, Delaunay triangulation and Voronoi diagrams to examine the spatial distribution, aggregation and proximity characteristics of the color steel buildings. Our experiments show that the temporal and spatial differences of urban development, the phased characteristics and urban space are represented by various types of color steel buildings. Thus, there are some robust coupling relationship between color steel buildings, urban spatial form and urban development.

Cyanobacterial blooms occur with increasing frequency in freshwater ecosystems, posing a hazard to human and environmental health. Exposure of human to cyanobacterial metabolites occurs mostly via accidental ingestion through contaminated drinking water or during recreational activities and, most frequently, results in gastrointestinal symptoms. Despite the clinical manifestation, cyanobacterial metabolites are rather investigated for their toxicity towards specific organs or tissues, especially hepato-, nephro- and neurotoxicity, then for effects on the gastrointestinal tract and the associated lymphoid tissue. The aim of this review was to systematically summarize available literature on the effects on the gastrointestinal tract and the mucosal innate immune system and compile the data from both, in vitro and in vivo studies, focusing on human-health relevant models. Our systematic literature review revealed significant data gaps in the understanding on metabolites breaching the gastrointestinal barrier and the role of the immune system in the establishment of clinical symptoms. Microcystins and cylindrospermopsin were linked to gastrointestinal symptoms, immune system effects or both. Furthermore, implications for cyanobacterial bloom lipopolysaccharides in gastrointestinal inflammation were reported in several cases, while other metabolites received only minor attention. The collected data indicate the need for a reassessment of potential enterotoxicity of microcystins and cylindrospermopsin. Additionally, the carcinogenic potential of cyanotoxins, especially microcystins, has to be clarified, as an increasing amount of epidemiological studies show correlations between cyanobacterial blooms and gastrointestinal cancer incidence. Furthermore, other, often highly abundant bioactive metabolites like aeruginosins, have to be toxicologically evaluated at levels also accounting for (sub-)chronic exposure to low concentrations and in combination with naturally co-occurring metabolites, as can be expected in drinking water supplies. studies, focusing on human-health relevant models. Our systematic literature review revealed significant data gaps in the understanding on metabolites breaching the gastrointestinal barrier and the role of the immune system in the establishment of clinical symptoms. Microcystins and cylindrospermopsin were linked to gastrointestinal symptoms, immune system effects or both. Furthermore, implications for cyanobacterial bloom lipopolysaccharides in gastrointestinal inflammation were reported in several cases, while other metabolites received only minor attention. The collected data indicate the need for a reassessment of potential enterotoxicity of microcystins and cylindrospermopsin. Additionally, the carcinogenic potential of cyanotoxins, especially microcystins, has to be clarified, as an increasing amount of epidemiological studies show correlations between cyanobacterial blooms and gastrointestinal cancer incidence. Furthermore, other, often highly abundant bioactive metabolites like aeruginosins, have to be toxicologically evaluated at levels also accounting for (sub-)chronic exposure to low concentrations and in combination with naturally co-occurring metabolites, as can be expected in drinking water supplies.

A convenient practical model for accurately estimating the total entropy (ΣSi) of atmospheric gases based on physical action is proposed. This realistic approach is fully consistent with statistical mechanics, but reinterprets its partition functions as measures of translational, rotational and vibrational action or quantum states, to estimate the entropy. With all kinds of molecular action expressed as logarithmic functions, the total heat required for warming a chemical system from 0o K (ΣSiT) to a given temperature and pressure can be computed, yielding results identical with published experimental third law values of entropy. All thermodynamic properties of gases including entropy, enthalpy, Gibbs energy and Helmholtz energy are directly estimated using simple algorithms based on simple molecular and physical properties, without resource to tables of standard values; both free energies are measures of quantum field states and of minimal statistical degeneracy, decreasing with temperature and declining density. We propose that this more realistic approach has heuristic value for thermodynamic computation of atmospheric profiles, based on steady state heat flows equilibrating with gravity. Potentially, this application of an action principle can provide better understanding of emergent properties of many natural or evolving complex systems, including modelling of predictions for global warming.

(E)-β-ocimene was the only found volatile chemical emitted by whole, live worker larvae of Apis mellifera L. by sampling in the vapor phase. While in addition to (E)-β-ocimene, there is evidence for the existence of other volatiles; but the changes of their composition and contents remain unknown during larval development, as are their differences from larvae to larval food. This is the main purpose of the study. We investigated volatile components of worker larvae and larval food using solid phase dynamic extraction (SPDE) coupled with gas chromatography-mass spectrometry (GC-MS). Nine compounds were identified with certainty and six tentatively, consisting of terpenoids, aldehydes, hydrocarbons, ester and ketone. The contents of volatiles of the second-instar worker larvae differ greatly from larvae of other stages mainly attributable to terpenoids, which made the second-instar worker larvae had significantly higher amounts of overall volatiles. Larval food contained significantly higher amounts of aldehydes and hydrocarbons than the corresponding larvae from the fourth to fifth-instar. We discovered volatiles in worker larvae and their food which were never reported before; we also mastered the change of these volatiles’ contents during larval development.

This paper focuses on the crucial role that remote sensing plays in divining land features. Data that is collected distantly provides information in spectral, spatial, temporal and radiometric domains, with each domain having the specific resolution to information collected. Diverse sectors such as hydrology, geology, agriculture, land cover mapping, forestry, urban development and planning, oceanography and others are known to use and rely on information that is gathered remotely from different sensors. In the present study, IRS LISS IV Multi-spectral data is used for land cover mapping. It is known, however, that the task of classifying high-resolution imagery of land cover through manual digitizing consumes time and is way too costly. Therefore, this paper proposes accomplishing classifications by way of enforcing algorithms in computers. These classifications fall in three classes: supervised, unsupervised, and object-based classification. In the case of supervised classification, two approaches are relied upon for land cover classification of high-resolution LISS-IV multispectral image. These approaches are Maximum Likelihood and Support Vector Machine (SVM). Finally, the paper proposes a step-by-step procedure for optical image classification methodology. This paper concludes that in optical data classification, SVM classification gives a better result than the ML classification technique.

Anthropogenic activities have increased the amount of urban wastewater discharged into natural aquatic reservoirs confining in them a high amount of nutrients and organics contaminants. Several studies have reported that an alternative to reduce those contaminants is using consortiums of microalgae and endogenous bacteria. In this research, a genome-scale biochemical reaction network is reconstructed for the co-culture between the microalga Chlorella vulgaris and the bacterium Pesudomonas aeruginosa. Metabolic Pathway Analysis (MPA), is applied to understand the metabolic capabilities of the co-culture and to elucidate the best conditions in removing nutrients such as Phosphorus (inorganic phosphorous and phosphate) and Nitrogen (nitrates and ammonia). Theoretical yields for Phosphorus removal under photoheterotrophic conditions are calculated, determining their values as 0.042 mmol of PO₄/ g DW of C. vulgaris, 19.53 mmol of inorganic Phosphorus /g DW of C. vulgaris and 4.90 mmol of inorganic Phosphorus/ g DW of P. aeruginosa. Similarly, according to the genome-scale biochemical reaction network the theoretical yields for Nitrogen removal are 10.3 mmol of NH₃/g DW of P. aeruginosa and 7.19 mmol of NO₃ /g DW of C. vulgaris. Thus, this research proves the metabolic capacity of these microorganisms in removing nutrients and their theoretical yields are calculated.

Construction projects are usually operating in a complex and dynamic environment in which the accumulation of many interrelated factors causes high uncertainty. Construction projects are complex and frequently involve substantial uncertainties including process complicatedness, intricate organization structure, dynamic environment, and financial strain. The study aims to categorize the influencing factors into three groups, namely construction project system, economic-market climate, and external environment. It attempts to adopt a novel analysis tool to examine the relationship between the project cost and multiple influencing factors by using Bayesian SEM. While the Bayesian SEM method has been receiving increasing attention in exploring the relationship between latent variables, construction studies still heavily rely on the covariance-based SEM approach. This study introduces several advantages of Bayesian SEM that make it more flexible and powerful than covariance-based SEM and provides the foundation of Bayesian SEM estimation and inference by illustrating this method in a project cost application.

Amorphous ferrite-type rare-earth (RE) substituted garnets and garnet-oxide nanocomposite layers are prepared on clear glass substrates by using RF magnetron sputter-deposition process. By using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method, the spectral dispersion function of optical constants and the layer thicknesses are derived accurately from the transmission spectra of the as-deposited samples. The effects of excess metal-oxides added to the base material systems during the co-deposition process are found to affect the refractive index and the optical absorption coefficients of garnet-oxide composites. A number of optical constant datasets are presented, enabling the experimentalists to design nanophotonic or integrated-optics devices employing these functional materials.

Construction projects are usually operating in a complex and dynamic environment in which the accumulation of many interrelated factors causes high uncertainty. Construction projects are complex and frequently involve substantial uncertainties including process complicatedness, intricate organization structure, dynamic environment, and financial strain. The study aims to categorize the influencing factors into three groups, namely construction project system, economic-market climate, and external environment. It attempts to adopt a novel analysis tool to examine the relationship between the project cost and multiple influencing factors by using Bayesian SEM. While the Bayesian SEM method has been receiving increasing attention in exploring the relationship between latent variables, construction studies still heavily rely on the covariance-based SEM approach. This study introduces several advantages of Bayesian SEM that make it more flexible and powerful than covariance-based SEM and provides the foundation of Bayesian SEM estimation and inference by illustrating this method in a project cost application.

Brown adipose tissue (BAT) function may depend on its anatomical location and developmental origin. Interscapular BAT (iBAT) regulates acute macronutrient metabolism, whilst perivascular BAT (PVAT) regulates vascular function. Although phenotypically similar, whether these depots respond differently to acute nutrient excess is unclear. Given their distinct anatomical locations and developmental origins and we hypothesised that iBAT and PVAT would respond differently to brief period of nutrient excess. Sprague-Dawley rats aged 12 weeks (n = 12) were fed either a standard (10% fat, n = 6) or high fat diet (HFD: 45% fat, n = 6) for 72 h and housed at thermoneutrality. Following an assessment of whole body physiology, fat was collected from both depots for analysis of gene expression and the proteome. HFD consumption for 72 h induced rapid weight gain (c. 2.6%) and reduced serum NEFA with no change in either total adipose or depot mass. In iBAT, an upregulation of genes involved in insulin signalling and lipid metabolism was accompanied by enrichment of lipid-related processes and functions, plus glucagon and PPAR signalling pathways. In PVAT, HFD induced a pronounced down-regulation of multiple metabolic pathways which was accompanied with increased abundance of proteins involved in apoptosis (e.g. Hdgf and Ywaq) and toll-like receptor signalling (Ube2n). There was also an enrichment of DNA-related processes and functions (e.g., nucleosome assembly and histone exchange) and RNA degradation and cell adhesion pathways. In conclusion, we show that iBAT and PVAT elicit divergent responses to short-term nutrient excess highlighting early adaptations in these depots before changes in fat mass.

Background: Papillomaviruses (PVs) are double-stranded DNA viruses and are more common in skin of ruminants in Iraq. A P53 (tumor suppressor protein) reveals an essential role in cell cycle control. This study aimed to describe the clinical, histopathological and immunohistochemical aspects of naturally occurring cutaneous ruminant’s papillomatosis. Methods: Samples were collected from totally, 10 animals (3 cattle, 3 goats and 4 sheep) with multiple papillomatosis lesions. Results: Clinically, exophytic multiple, cauliflower-like growths (warts) of varying sizes (0.5-11 cm) were found in different areas of the animal’s bodies. Histopathological features were various degrees of koilocytosis, ortho and parakeratotic, hyperkeratosis, hypergranulosis in granular layer and acanthosis. Immunohistochemical (IHC) investigations revealed some nuclei in the granular and basal layers of the epidermis with intense positivity for papillomavirus antigen. All tumor samples were positive for p53 expression that appeared as a strong cytoplasmic and perinuclear staining mainly in the basal and parabasal layers. Conclusion: this study described the papillomavirus lesions in bovine, ovine and caprine, that located in different anatomical areas with minor variations in histopathological features. The tumor samples showed positive results for PV antigen and P53 expression that considered as the useful markers in the diagnosis of cutaneous papilloma.

We consider the conjecture of the relationship between the entanglement entropy of spacetime, matter and the action in Einstein's general relativity. Our analysis suggests the possibility of regarding the entanglement entropy of spacetime and matter as the dimensionless action in general relativity by using Planck units. In this case, the action principle originates from the maximization of the entanglement entropy. We also show that the fundamental property of entanglement entropy leads to attractive characteristic of gravitational force for classical particles.

Titanium dioxide (TiO2) and aluminum oxide (Al2O3) coatings have been investigated in a wide range of bio-applications due to their biodegradation and biocompatibility properties, that are key parameters for their use in the food packaging and biomedical devices fields. The present study evaluates and compares the electrochemical behavior of the non-coated, commercial resin-coated, TiO2-coated and Al2O3-coated aluminum in commercial beer electrolyte. For this, TiO2 and Al2O3 thin films were deposited on aluminum (Al) substrates using atomic layer deposition (ALD). The evaluation of the corrosion barrier layer properties was performed by linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). In addition, profilometry, grazing incidence X-ray diffractometry (GIXRD), scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR) analyses were performed to investigate the physical and chemical properties of the pristine and / or corroded samples. TiO2 and Al2O3 films presented an amorphous structure, a morphology that follows Al substrate surface, and a thickness of around 100 nm. Analysis of LSV data showed that ALD coatings promoted a considerable increase in corrosion barrier efficiency being 86.3% for TiO2-coated Al and 80% for Al2O3-coated Al in comparison with 7.1% of commercial resin-coated Al. This is mainly due to the lower electrochemical porosity, 11.4% for TiO2-coated Al and 20.4% for Al2O3-coated Al in comparison with 96% of the resin-coated Al, i.e. an increase of up to twofold in the protection of Al when coated with TiO2 compared to Al2O3 coated. The EIS results allow us to complement the discussions about the reduced corrosion barrier efficiency of the Al2O3 film for beer electrolyte once SEM and FT-IR analyzes did not show drastic changes in both investigated ALD films after the corrosion assays. The above results indicate that ALD TiO2 and Al2O3 films may be a viable alternative to replace the synthetic resin coatings frequently used in aluminum cans of use in the food industry.

Chagalapoli fruit (Ardisia compressa) is similar to Vaccinium myrtillus (berries) with high-polyphenol content. The objective of this study was to evaluate the physicochemical properties of Chagalapoli fruit and to determine the conditions for the preparation of a fermented beverage using Saccharomyces cerevisiae yeast, evaluating the impact on sensory properties. The fermentation process lasted 4 days at 27 °C, with absence of light and a fixed pH of 3.8. The phenolic contents obtained in samples according to chromatograms were 1.27 mg(EPI)/mL in filtered juice, 1.59 mg(EPI)/mL in filtered fermented beverage, 1.91 mg(EPI)/mL in partially filtered juice and 3.19 mg(EPI)/mL in partially filtered fermented beverage. An affective test was carried out to determine the sensory acceptability of the final product, evaluating the flavor, color and aroma parameters. The fermented beverage with the greatest preference on color and flavor attributes was the partially filtered fermented beverage.

Background/Goals: The gut hormone PYY secreted from intestinal L-cells has been implicated in the mechanisms of satiation via Y2-receptor (Y2R) signaling in the brain and periphery and is a major candidate for mediating the beneficial effects of bariatric surgery on appetite and body weight. Methods: Here we assessed the role of Y2R signaling in the response to low- and high-fat diets and its role in the effects of Roux-en-Y gastric bypass (RYGB) surgery on body weight, body composition, food intake, energy expenditure and glucose handling, in global Y2R-deficient (Y2RKO) and wildtype mice made obese on high-fat diet. Results: Both male and female Y2RKO mice responded normally to low- and high-fat diet in terms of body weight, body composition, fasting levels of glucose and insulin, as well as glucose and insulin tolerance for up to 30 weeks of age. Contrary to expectations, obese Y2RKO mice also responded similarly to RYGB compared to WT mice for up to 20 weeks after surgery, with initial hypophagia, sustained body weight loss, and significant improvements in fasting insulin, glucose tolerance, HOMA-IR, and liver weight compared to sham-operated mice. Furthermore, non-surgical Y2RKO mice weight-matched to RYGB showed the same improvements in glycemic control as Y2RKO mice with RYGB that were similar to WT mice. Conclusions: PYY signaling through Y2R is not required for the normal appetite-suppressing and body weight-lowering effects of RYGB in this global knockout mouse model. Potential compensatory adaptations of PYY signaling through other receptor subtypes or other gut satiety hormones such as GLP-1 remain to be investigated.

Statistical mechanics investigates how emergent properties of macroscopic systems (such as temperature and pressure) relate to microscopic state fluctuations. The underlying idea is that global statistical descriptors of order and variability can monitor the relevant dynamics of the whole system at hand. Here we test the possibility of extending such an approach to psychotherapy research investigating the possibility of predicting the outcome of psychotherapy on the sole basis of coarse-grained empirical macro-parameters. Four good-outcome and four poor-outcome brief psychotherapies were recorded, and their transcripts coded in terms of standard psychological categories (abstract, positive emotional and negative emotional language pertaining to patient and therapist). Each patient-therapist interaction is considered as a discrete multivariate time series made of subsequent word-blocks of 150-word length, defined in terms of the above categories. Static analysis (Principal Component Analysis) highlighted a substantial difference between good-outcome and poor-outcome cases in terms of mutual correlations among those descriptors. In the former, the patient’s use of abstract language correlated with therapist’s emotional negative language, while in the latter it co-varied with therapist’s emotional positive language, thus showing the different judgment of the therapists regarding the same variable (abstract language) in poor and good outcome cases. On the other hand, the dynamic analysis, based on five coarse-grained descriptors related to variability, degree of order and complexity of the series, demonstrated a relevant case-specific effect, pointing to the possibility of deriving a consistent picture of any single psychotherapeutic process. Overall, the results showed that the systemic approach to psychotherapy (an old tenet of psychology) is mature to shift from a metaphorical to a fully quantitative status.

In recent years, it has been found in engineering practice that the service life of cemented carbide shield machine tools used in uneven soft and hard strata is substantially reduced. The study found that thermal stress is the main reason for the failure of cemented carbide shield tunneling tools when shield tunneling is carried out in uneven soft and hard soil. To maintain the hardness of cemented carbide, improving the thermal conductivity of the shield machine tool is of great importance for prolonging its service life and reducing engineering costs. In this paper, graphene and carbon nanotubes were mixed with WC-Co powder and sintered by SPS (Spark Plasma Sintering). The morphology was observed by using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). A Rockwell hardness tester and bending strength tester were used to test hardness, bending strength and thermal conductivity. The results show that adding trace graphene or carbon nanotubes can increase the bending strength of the cemented carbide by approximately 50% while keeping the hardness of the cemented carbide unchanged. The thermal conductivity of the cemented carbide can be increased by 10% with the addition of 0.12% graphene alone.

The issue of measurement reliability is certainly undervalued in the local agricultural marketplace organization. Besides, there was nothing identified concerning the extent of cereal commodity trade measurement cost. Hence, this paper aimed to estimate the magnitude of cereals trade quantity measurement cost caused by instrument error and unreliability; mainly by targeting the local marketplace in Ethiopia. The survey was conducted in six different districts’ marketplaces (n = 602) of Oromia region by employing administered structured questionnaires and site mass measurement calibration. The gathered data were analyzed using independent samples t-test, one sample t-test, and analysis of variance. According to the findings, the actual value measurement means of the quantity of most local units of the farmers were greater than small traders. The independent t-test result indicated that the average values of the quantity of the majority of units of measurement between farmers and small traders were varied significantly. Estimated measuring instruments’ error and unreliability associated average measurement cost of one-day market transaction over total cereals marketed amount were higher comparatively for a sack, bowl, and glass units. This study demonstrates that homogeneity in measurement, policy, and institutions that aid cereals trade would have an indispensable role to reduce measurement costs and ensure equitable exchange.

Data creation is often the only way for researchers to produce basic geospatial information for the pursuit of more complex tasks and procedures such as those that lead to the production of new data for studies concerning river basins, slope morphodynamics, applied geomorphology and geology, urban and territorial planning, detailed studies, for example, in architecture and civil engineering, among others. This exercise results from a reflection where specific data processing tasks executed in Google Sketchup (Pro version, 2018) can be used in a context of interoperability with Geographical Information Systems (GIS) software. The focus is based on the production of contour lines and Digital Elevation Models (DEM) using an innovative sequence of tasks and procedures in both environments (GS and GIS). It starts in Google Sketchup (GS) graphic interface, with the selection of a satellite image referring to the study area—which can be anywhere on Earth's surface; subsequent processing steps lead to the production of elevation data at the selected scale and equidistance. This new data must be exported to GIS software in vector formats such as Autodesk Design Web format—DWG or Autodesk Drawing Exchange format—DXF. In this essay the option for the use of GIS Open Source Software (gvSIG and QGIS) was made. Correcting the original SHP by removing “data noise” that resulted from DXF file conversion permits the author to create new clean vector data in SHP format and, at a later stage, generate DEM data. This means that new elevation data becomes available, using simple but intuitive and interoperable procedures and techniques which confgures a costless work flow.

Cellular agriculture is defined as the production of agricultural products from cell cultures rather than from whole plants or animals. With growing interest in cellular agriculture as a means to address the public health, environmental, and animal welfare challenges of animal agriculture, the concept of producing seafood from fish cell- and tissue-cultures is emerging as a means to address similar challenges with industrial aquaculture systems and marine capture. Cell-based seafood - as opposed to animal-based seafood - can combine developments in biomedical engineering with modern aquaculture techniques. Biomedical engineering developments such as closed-system bioreactor production of land animal cells create a basis for large scale production of marine animal cells. Aquaculture techniques such as genetic modification and closed system aquaculture have achieved marked gains in production that can pave the way for innovations in cell-based seafood production. Here, we present the current state of innovation relevant to the development of cell-based seafood across multiple species as well as specific opportunities and challenges that exist for advancing this science. The authors find that the physiological properties of fish cell- and tissue- culture may be uniquely suited to cultivation in vitro. These physiological properties, including hypoxia tolerance, high buffering capacity, and low-temperature growth conditions, make marine cell culture an attractive opportunity for scale production of cell-based seafood; perhaps even more so than mammalian and avian cell cultures for cell-based meats. This, coupled with the unique capabilities of crustacean tissue-friendly scaffolding such as chitosan, a common seafood waste product and mushroom derivative, presents great promise for cell-based seafood production via bioreactor cultivation. To become fully realized, cell-based seafood research will require more understanding of fish muscle culture and cultivation; more investigation into serum-free media formulations optimized for fish cell culture; and bioreactor designs tuned to the needs of fish cells for large scale production.

Research within the field of hydrology often focuses on comparing stochastic to machine learning (ML) forecasting methods. The comparisons performed are all based on case studies, while an extensive study aiming to provide generalized results on the subject is missing. Herein, we compare 11 stochastic and 9 ML methods regarding their multi-step ahead forecasting properties by conducting 12 large-scale computational experiments based on simulations. Each of these experiments uses 2 000 time series generated by linear stationary stochastic processes. We conduct each simulation experiment twice; the first time using time series of 100 values and the second time using time series of 300 values. Additionally, we conduct a real-world experiment using 405 mean annual river discharge time series of 100 values. We quantify the performance of the methods using 18 metrics. The results indicate that stochastic and ML methods perform equally well.

This study examines the effect of market risk on the financial performance of 31 non-financial companies listed on the Casablanca Stock Exchange (CSE) over the period 2000-2016. We utilize three alternative variables to assess financial performance, namely return on assets, return on equity and profit margin. Next, we use the degree of financial leverage, the book-to-market ratio, and the gearing ratio as market risk variables. Besides, we employ the pooled OLS model, the fixed effects model, the random-effects model, the difference GMM and the system GMM models. The results show that market risk indicators have a negative and significant influence on the companies' financial performance. The elasticities are greater following the book-to-market ratio compared to the degree of financial leverage and the gearing ratio, respectively. In most cases, the firm size, the tangibility ratio, and the cash holdings ratio have a positive effect on financial performance, whereas the firms' age, the debt-to-income ratio, stock turnover, and leverage hurt the performance of these non-financial companies. Therefore, decision-makers and managers should mitigate market risk through appropriate strategies of risk management, such as derivatives and insurance techniques.

Biophoton emission has been experimented for decades. The photo-genic origin of biophoton has also been attributed to the oxidative stress or free radical production. However, there are considerable gaps in quantitative understanding of biophoton emission. In this work, I propose an analytical hypothesis for interpreting a few patterns of steady-state biophoton emission of human, including the dependency on age, the diurnal variation, and the geometric asymmetry associated with serious asymmetrical pathological conditions. The hypothesis is based on an alternative form of energy state, termed vivo-nergy, which is associated with only metabolically active organisms that are also under neuronal control. The hypothesis projects a decrease of the vivo-nergy in human during growth beyond puberty. The hypothesis also proposes a modification of the vivo-nergy by the phases of systematic or homeostatic physiology. The hypothesis further postulates that the deviation of the physiology-modified vivo-nergy from the pre-puberty level is deteriorated by acquired organ-specific pathological conditions. A temporal differential change of vivo-nergy is hypothesized to proportionally modulate oxidative stress that functions as the physical source of biophoton emission. The resulted steady-state diffusion of the photon emitted from a photo-genic source in a human geometry simplified as a homogeneous spherical domain is modeled by photon diffusion principles incorporating an extrapolated zero-boundary condition. The age and systematic physiology combined determines the intensity of the centered physiological steady-state photo-genic source. An acquired pathology sets both the intensity and the off-center position of the pathological steady-state photo-genic source. When the age-commemorated, physiology-commanded, and pathology-controlled modifications of the steady-state photo-genetic sources are implemented in the photon diffusion model, the photon fluence rate at the surface of the human-representing spherical domain reveals the patterns on age, the temporal variation corresponding to systematic physiology, and the geometric asymmetry associated with significant asymmetric pathological condition as reported for spontaneous biophoton emission. The hypothesis, as it provides conveniences for quantitative estimation of biophoton emission patterns, will be extended in future works towards interpreting the temporal characteristics of biophoton emission under stimulation.

The expansion of concrete subjected to extreme elevated temperature is linked with intricate micro-structural variations, such as the transformation of the constituent phases. This study proposes a model to predict the thermal expansion of cement paste and concrete considering micro-structural changes under elevated temperatures ranging from 20°C to 800°C. The model presented can consider characteristics of various aggregates in the calculation of thermal expansion for concrete. The model is a combination of a multi-scale stoichiometric model and a multi-scale composite model. At the cement paste level, the model satisfactorily predicted a test result. At concrete level, upper bounds from the model were matched relatively well with test results by previous researcher. If the mechanical properties, such as elastic modulus (E), Poisson’s ratio (ν), and thermal deformation, of the aggregates used in concrete are given, it is likely that the model will reasonably predict experimental results.

The possibility to test a radio frequency transceiver through the use of appropriate channel emulators allows to evaluate their performance under various operating conditions. Many systems are able to operate with a relatively limited instantaneous bandwidth by applying known statistical models. Sometimes it is necessary to evaluate the performance of a RF transceiver installed on high or very high speed platforms over predictable trajectories using optionally DEMs (Digital Elevation Models)data of the terrain to estimate the number of stimulated paths and their contributions during the flight. When the instantaneous bandwidth of the signal becomes high (over several hundred of MHz), one of the most important phenomenon to consider is the Doppler spread induced by the channel and traditional narrowband models become unuseful. In this paper there are presented some results when a time expansion is adopted in order to emulate the transceiver dynamic and the consequent Doppler spread with the aim to control the spectral purity of the emulated propagation channel.

The release profiles of methotrexate, an anticancer drug, from the monoolein liquid crystalline cubic phases were studied. The cubic phases were used either in the form of a lipidic film deposited onto a glassy carbon electrode surface or in the dispersed form of magnetocubosomes, which are considered a prospective hybrid drug delivery system. Commonly, cubosomes or liposomes are employed, but not in the case of toxic methotrexate, known to block receptors responsible for folate transport into the cells. The release profiles of the drug from the lipidic films were monitored electrochemically and described using the Higuchi model. They were also modified via changes in temperature; the release was faster, although deviating from the model when the temperature was increased. Magnetocubosomes - cubic phase nanoparticles containing hydrophobic magnetic nanoparticles placed in an alternating magnetic field of low frequency and amplitude, stimulated drug release from the suspension, which was monitored spectroscopically. These new biocompatible hybrid materials are very promising, allowing to control the release of the drug at the appropriate sites, but do require further investigations into their in vitro cytotoxicity and in vivo biodistribution.

It is shown that structuring at the microlevel is the intrinsic property of water and aqueous solutions. At room conditions water (including "ultrapure" one) and aqueous solutions are dispersed systems in which microcrystals of NaCl, surrounded by a layer of hydrated water (average diameter - 10-15 microns), are "elementary microparticles", which form the basis of the dispersed phase. Possible ways of formation of these microparticles and their evolution in the process of evaporation of unstructured part of water - dispersion medium - are considered. It is shown, in particular, that they are present in the air as aerosol contaminants. When the ionic strength of the solution increases, the water-salt particles coagulate, forming a new phase - coacervates, remaining on the substrate after evaporation of the liquid part of the water. The aggregates of coacervate structures, formed in a liquid medium, are disordered during heating, which can cause a change in a number of physicochemical properties of water at the temperatures of 50°-60°C range that have not been correctly explained in the framework of atomic-molecular concepts.

As metabolomics is widely used in the study of disease mechanisms, more and more studies have found that metabolites play an important role in the occurrence of diseases. The aim of this study is to investigate the effects and mechanisms of quercetin in high-fat-sucrose diet (HFD)-induced nonalcoholic fatty liver disease (NAFLD) development using nontargeted metabolomics. A rat model of NAFLD was established by feeding with a HFD for 30 and 50 days. Results indicated quercetin exhibited hepatoprotective activity in HFD-induced NAFLD rats in 30 days by regulating fatty acids related metabolites (adrenic acid, etc.), inflammation related metabolites (arachidonic acid, etc.), oxidative stress related metabolites (2-hydroxybutyric acid) and other differential metabolites (citric acid, etc.). However, quercetin couldn’t improve NAFLD in 50 days maybe it couldn’t reverse the inflammation condition induced by long-term high-fat diet. These data indicate that dietary quercetin may be beneficial to NAFLD at early stages. Furthermore, combining metabolomics and experimental approaches opens up avenues of effects and mechanisms of drugs for complex diseases.

An increasing use of non-metallic reinforcement is problematic as it has to be detected at the stage of accepting construction works, or later when expert opinions are prepared for the building. In contrast to metallic reinforcement, location of this type of reinforcement is difficult using non-destructive techniques. Small diameters of rebars and their location in a tested element were troublesome. This article describes an attempt to locate non-metallic reinforcement in a concrete element and the masonry. Tests were performed using an ultrasonic tomograph and GPR with a broad range of frequencies.

Supplier selection is one of the most important multi criteria decision making (MCDM) problems for decision makers in competitive market. Organizations of today’s world are seeking new ways to reduce negative effects of their organizations to the environment and to reach a greener system. At this point, green supplier selection concept has gained great importance with its ability on incorporating environmental or green criteria into the classical supplier selection practices. Therefore, in this study, it is aimed at proposing a multi-phase MCDM model based on Best-Worst Method (BWM) and interval type-2 fuzzy technique for order preference by similarity to ideal solution (TOPSIS). A case study in a plastic injection molding facility in Turkey is performed to show the applicability of the proposed integrated methodology. The paper ensures insights into the decision making, methodology, and managerial implications. Results of the case study are examined and suggestions for future research are provided.

The advancements in the study of the human sense of touch are fueling the field of haptics. This is paving the way for augmenting the sensory perception during objects palpation in tele-surgery, and reproducing the information through tactile feedback. Here, we present a novel tele-palpation apparatus that enables the user to detect nodules with various distinct stiffness buried in an ad-hoc polymeric phantom. The contact force measured by the platform was encoded using a neuromorphic model and reproduced on the index fingertip of a remote user through a haptic glove embedding a piezoelectric disk. We assessed the effectiveness of this feedback in allowing nodule identification under two experimental conditions of real-time telepresence: In Line of Sight (ILS), where the platform was placed in the visible range of a user; and the more demanding Not In Line of Sight (NILS), with the platform being 50 km apart. We found that the entailed percentage of identification was higher for stiffer inclusions with respect to the softer ones (average of 74% within the duration of the task), in both telepresence conditions evaluated. These promising results call for further exploration of tactile augmentation technology for telepresence in medical interventions.

With the long-term and large-scale use, herbicides have been well known to influence tritrophic interactions particularly natural enemies of pests in agro-ecosystems. On the other hand, herbivorous insects, especially the generalist pests, have developed antagonistic interaction to different insecticides, toxic plant secondary metabolites and even heavy metals. However, whether exposure to herbicides would affect resistance of insects against insecticides is largely unknown, especially in agricultural pests. Here, we first reported that pre-exposure to two widely used herbicides butachlor and haloxyfop-methyl for 48 h can prime resistance of a generalist agricultural pest Helicoverpa armigera Hübner against insecticide methomyl and fungal toxin aflatoxin B1. In addition, there were no significant differences between control and herbicides-treated caterpillars on weight gain, pupal weight and pupation rates, suggesting that exposure to herbicides induce resistance of H. armigera accompanied with no fitness cost. Moreover, by determining detoxifying enzyme activities and toxicity bioassay with additional inhibitor of cytochrome P450 piperonyl butoxide (PBO), we showed that exposure to herbicides might prime P450-mediated detoxification of H. armigera against insecticide. Based on these results, we propose that exposure to herbicides primes resistance of H. armigera against insecticide by eliciting a clear elevation of predominantly P450 monooxygenase activities in midgut and fat body.

In the paper, a fully discrete compact difference scheme with $O(\tau^{2}+h^{4})$ precision is established by considering the numerical approximation of the one-dimensional Allen-Cahn equation. The numerical solutions satisfy discrete maximum principle under reasonable step ratio and time step constraint is proved. And the energy stability for the fully discrete scheme is investigated. An example is finally presented to show the effectiveness of scheme.

Aggressive behavior in adolescence is influenced by a diversity of individual, family and social variables. The purpose of this study was to analyze the relationship between family functioning, emotional intelligence and values for development of different types of aggression, as well as to establish profiles according to the predictor variables of aggression. To do this, a sample of 317 high school students aged 13 to 18 were administered the Peer Conflict Scale, the Family Functionality Scale, the Brief Emotional Intelligence Inventory for Senior Citizens and the Values for Adolescent Development Scales. The study showed that stress management, positive adolescent development and family functioning predominated in nonaggressive subjects with higher scores than aggressors. There was also a negative relationship between the different types of aggression and emotional intelligence, positive values and family functioning. In addition, two different profiles were found. The first had low scores on all the variables, while the second profile had higher scores on all the variables except family functioning which was higher.

The description of protein disordered states is important for understanding protein folding mechanisms and their functions. In this short review, we briefly describe a simulation approach to modeling disordered protein interactions and unfolded states of globular proteins. It is based on the CABS coarse-grained protein model that uses a Monte Carlo (MC) sampling scheme and a knowledge-based statistical force field. We review several case studies showing that description of protein disordered states resulting from CABS simulations is consistent with experimental data. The case studies comprise investigations of protein-peptide binding and protein folding processes. The CABS model has been recently made available as the simulation engine of multiscale modeling tools enabling studies of protein-peptide docking and protein flexibility. Those tools offer customization of the modeling process, driving the conformational search using distance restraints, reconstruction of selected models to all-atom resolution and studies of large protein systems in a reasonable computational time. Therefore, CABS can be combined in integrative modeling pipelines incorporating experimental data and other modeling tools of various resolution.

Exact and soliton type solutions have great importance in propagation of surface waves, fluid dynamics, optics, and many other elds of nonlinear sciences. In this study, the explicit and exact soliton type solutions for two space-time fractional Equal- Width (FEW) equations with conformable derivative are procured via the hyperbolic function approach. The wave type solutions are represented in some hyperbolic and trigonometric functions.

The oncogenes that are expressed in gliomas reprogram particular pathways of glucose, amino acid, and fatty acid metabolism. Mutations in isocitrate dehydrogenase genes (IDH1/2) in diffuse gliomas are associated with abnormally high levels of 2-hydroxyglutarate (2-HG) levels. The aim of this study was to determine whether metabolic reprogramming associated with IDH mutant gliomas leads to additional 1H MRS-detectable differences between IDH1 and IDH2 mutations and to identify metabolites correlated with 2-HG. A total of 21 glioma patients (age= 3711, 13 males) were recruited for MRS using a Semi-localization by adiabatic selective refocusing pulse sequence at ultra-high-field (7T). Tumour mutation subtype was confirmed by immunohistochemistry and DNA sequencing. LCModel analysis was applied for metabolite quantification. A two-sample t-test was used for metabolite comparisons between IDH1 (n=15) and IDH2 (n=5) mutant gliomas. The Pearson correlation coefficients between 2-HG and associated metabolites were calculated. A Bonferroni correction was applied for multiple comparison. IDH2 mutant gliomas have a higher level of 2-HG/tCho (total choline=phosphocholine+glycerylphosphorylcholine) (2.481.01vs.0.720.38, Pc<0.001) and myo-Inositol/tCho (2.700.90vs.1.460.51, Pc=0.011) compared to IDH1 mutation gliomas. Associated metabolites, myo-Inositol and glucose+taurine were correlated with 2-HG levels. These results show improved characterization of the metabolic pathways in IDH1 and IDH2 gliomas for precision medicine.

Kei-apple (Dovyalis caffra L) is an indigenous fruit tree of southern Africa. It is currently found in the dry, wooded grassland and forest edges of the arid and semi-arid regions of the world. Existing literature have mainly focused on the medicinal and nutritional as well as phytochemical characterization of Kei-apple. Thus, this review highlights beneficial economic prospects of Dovyalis caffra and its contribution to the economic prosperity. It is a drought tolerant plant with diverse uses such as income from the sale of the fruit, cultivated as a fence or to form an impenetrable hedge while the leaves are used for nutrient leaching prevention, fodder and compost making. The trunk of Dovyalis caffra serves as a good source of hard wood for fuel, house building and furniture making. It is also a good apicultural fruit tree and an excellent habitat and fertilizer derivation agent for farming activities. Considering the multidimensional effect of poverty and the food insecurity on many rural communities globally, there is a need to explore the potentials by encouraging the cultivation of Dovyalis caffra to assist with reducing unemployment, food insecurity and income-poverty problems in the arid and semi-arid areas of the world.

Purpose: To create a highly balanced comparison of ab interno trabeculectomy (Trabectome, AIT) and trabecular bypass stenting (iStent, TBS).Setting: Eye and Ear Institute, Pittsburgh, Ross Eye Institute, Buffalo, and Glaucoma Associates of Texas, Dallas, USA.Design: Retrospective Exact Matching analysis.Methods: AIT and TBS patients were included from three large glaucoma practices. The primary outcome measure was the unmedicated IOP ≤ 21 mmHg at 2-year follow-up visit. A secondary measure was unmedicated IOP reduction ≥ 20% at 2 years. Patients were matched by baseline IOP, the number of glaucoma medications and glaucoma type using Exact Matching and by age using Nearest Neighbor matching. Patients without a close match were excluded. All surgeries were combined with phacoemulsification. Results: 154 AIT and 110 TBS eyes were analyzed. 48 AIT patients were exactly matched to 48 TBS patients. Both groups had a baseline IOP of 15.3±3.1 mmHg. At 24 months, the mean IOP was 13.9±3.3 for AIT versus 16.8±2.8 mmHg for TBS (p=0.04), while the number of medications was 0.7±1.0 for AIT versus 1.7±1.2 for TBS (p=0.04). The proportion of subjects achieving IOP ≤ 21 mmHg without medications at 24 months was 53% in AIT versus 16.6% in TBS (P < 0.05). At 24-month follow up 17.6% of patients in AIT had ≥ 20% IOP reduction without medication versus no patient in TBS. Conclusions: An Exact Matching comparison of AIT and TBS demonstrated greater IOP reduction with fewer medications in AIT.

Dust inhalation is a huge concern in the mining environment and within all its operations. In fact, dust to be one of the most serious occupational hazards in the mining industry. Coal and crystalline silica dust are the causes of serious, sometimes fatal lung diseases such as pneumoconiosis, which affects coal miners, as well as silicosis, tuberculosis, chronic bronchitis, emphysema, chronic obstructive pulmonary disease, and chronic renal disease, which affect coal and other types of miners. The resulting effects both affect workers and nearby communities. The mining industry has in the past, employed several approaches to reduce effects of dust. But these strategies have often been ineffective because the grass withers during the dry season and sprayed water is rapidly absorbed or evaporates. This paper endeavors to review information on dust in the mining environment and how it is a nuisance to workers and communities and establish what strategies exist for this.

The advent of the genome editing era brings forth the promise of adoptive cell transfer using engineered chimeric antigen receptor (CAR) T-cells for targeted cancer therapy. CAR T-cell immunotherapy is probably one of the most encouraging developments for the treatment of hematological malignancies. In 2017, two CAR T-cell therapies were approved by the U. S Food and Drug Administration; one for the treatment of pediatric Acute Lymphoblastic Leukemia (ALL), the other for adult patients with advanced lymphomas. However, despite significant progress in the area, CAR T-cell therapy is still in its early days and faces significant challenges, including the complexity and costs associated with the technology. B-cell lymphoma is the most common hematopoietic cancer in dogs, with an incidence approaching 0.1% and a total of 20-100 cases per 100,000 individuals. It is a widely accepted naturally occurring model for human non-Hodgkin’s lymphoma. Current treatment is with combination chemotherapy protocols, which prolong life for less than a year in canines and are associated with severe dose-limiting side effects, such as gastrointestinal and bone marrow toxicity. To date, one canine study generated CAR T-cells by transfection of mRNA for CAR domain expression. While this was shown to provide a transient anti-tumor activity, results were modest, indicating that stable, genomic integration of CAR modules is required in order to achieve lasting therapeutic benefit. This Commentary summarizes the current state of knowledge on CAR T-cell immunotherapy in human medicine and its potential applications in animal health, while discussing the potential of the canine model as a translational system for immuno-oncology research.

One of the trends in current research in psychology explores how personal variables can determine a person’s communication style. Our objective was to find out the moderating effect of Mood in the relationship between the five big personality traits and an aggressive verbal communication style risk factor from work activity in a sample of nursing professionals. This study is a quantitative descriptive design. The final sample was 596 nurses with a range of 22 to 56 years. An ad hoc questionnaire was used to collect sociodemographic data, the 10-item Big Five Inventory, the Communication Styles Inventory, and the Brief Emotional Intelligence Inventory for Senior Citizens. This study showed that for nursing professionals, the “Agreeableness”, “Conscientiousness” and “Neuroticism” traits have a close relationship with aggressive verbal communication. Even though Mood moderates this relationship, it is only significant for those individuals with high scores in “Neuroticism”. Because personality dimensions are considered relatively stable over time and consistent from one situation to another, organizations should hold workshops and other types of practical activities to train workers in communication skills and Emotional Intelligence in order to promote employee health and that of their patients and avoid risk factor from work activity in nursing.

Home Security Systems are very important features of modern residential and office setups. This system is used to keep home safe from harmful gases, fire and intruders. It must be affordable, reliable and effective. In this paper, a GSM based home security system has been designed and implemented. The system consists of a GSM Module, MQ-2 smoke detector, Ultrasonic sonar sensor, LM35 temperature sensor, Arduino Uno and relay module. The MQ-2 smoke detector is used to detect harmful gases i.e. LPG, CH4, CO, Alcohol, Smoke or Propane. Any of the harmful gases stated above is detected it will warn the owner by activating the buzzer and displaying a warning message on the LCD display. It will also send a SMS to the owner. Our system can also measure temperate and if the temperature is increased above a certain range it will compensate it by activating Air Conditioner through the relay module. The system will also send a SMS to the owner. It can also detect intruders using Ultrasonic sensor and warn us through buzzer, SMS and displaying message on the LCD. Our system is reliable as it has very fast response and cost effective and it has been developed using our own technologies.

Dispersed silver nanoparticles (AgNPs) on the surface of titanium alloy (Ti6Al4V) and titanium alloy modified by titania nanotube layer (Ti6Al4V/TNT) substrates were produced by chemical vapor deposition method (CVD) using novel precursor of the formula [Ag₅(O₂CC₂F₅)₅(H₂O)₃]. The structure and volatile properties of this compound were determined using single crystal X-ray diffractometry, variable temperature IR spectrophotometry (VT IR), and electron inducted mass spectrometry (EI MS). The morphology and the structure of the produced Ti6Al4V/AgNPs, and Ti6Al4V/TNT/AgNPs composites were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Moreover, measurements of hardness, Young’s modulus, adhesion, and surface free energy have been carried out. The ability to release silver ions from the surface of produced nanocomposite materials immersed in PBS solution has been estimated using inductively coupled plasma mass spectrometry (ICP MS). The wettability and the surface free energy of samples were estimated on the base of contact angle studies with the use of water and diiodomethane. Among the studied surface-modified titanium alloy implants, the best nano-mechanical properties were noticed for the Ti6Al4V/TNT15/AgNPs composite. The location of silver nanoparticles inside of titania nanotubes caused their lowest release rate, which may indicate on suitable properties above mentioned type of the composite for the construction of implants with a long term of antimicrobial activity.

Retail buildings can provide energy flexibility to the grid with the possibility of load shifting and building automation systems. Demand response is a collective innovation in the smart grid domain. Various stakeholders should be involved in the demand response activities to ensure the success. The owners or senior management of retail buildings need to consider the stakeholders who are directly influenced by the demand response participation, e.g. customers and employees. Meanwhile, demand response activities are influenced by various factors, such as energy market structure, policy, etc. Therefore, this paper investigates the demand response readiness for retail buildings with three aspects: energy control preferences, stakeholder engagement, and cross-national differences. A questionnaire is designed and collected with store managers in Denmark (N=51) and the Philippines (N=36). The result shows that: 1) retail stores are much readier to participate in the implicit demand response by manual energy control compared to the utility control or building automation. Meanwhile, store managers have significant concerns about business activities and indoor lighting compared to other aspects; 2) the statistically significant influential factors for retail stores to participate in the demand response are related to whether the DR participation matches the company goals, influences business operation, and whether retail stores are lack of related knowledge; 3) retail stores believe that stakeholders should be informed about the DR activities but not involved in; 4) there are significant differences regarding the energy control preferences and concerns between retail stores in Denmark and the Philippines, but no significant difference regarding the stakeholder engagement.

Evaluating new, promising organic molecules to make next-generation organic optoelectronic devices necessitates the evaluation of charge carrier transport performance through the semi-conducting medium. In this work, we utilize quantum chemical calculations (QCC) and kinetic Monte Carlo (KMC) simulations to predict the zero-field hole mobilities of ~100 morphologies of the benchmark polymer poly(3-hexylthiophene), with varying simulation volume, structural order, and chain-length polydispersity. Morphologies with monodisperse chains were generated previously using an optimized molecular dynamics force-field and represent a spectrum of nanostructured order. We discover that a combined consideration of backbone clustering and system-wide disorder arising from side-chain conformations are correlated with hole mobility. Furthermore, we show that strongly interconnected thiophene backbones are required for efficient charge transport. This definitively shows the role "tie-chains" play in enabling mobile charges in P3HT. By marrying QCC and KMC over multiple length- and time-scales, we demonstrate that it is now possible to routinely probe the relationship between molecular nanostructure and device performance.

High density polyethylene (HDPE) and poly(lactic) acid (PLA) blends with different ratios of both polymers, namely 30:70, 50:50 and 70:30, were produced. Polyethylene grafted maleic anhydride and a random copolymer of ethylene and glycidyl methacrylate, were also proposed as compatibilizers to modify HDPE-PLA optimal blends and were added in the amounts of 1, 3 and 5 wt.%. Blends properties have been evaluated through different aspects by performing tensile tests, scanning electron microscopy to analyze blend morphology and interfaces, and thermomechanical analysis through differential scanning calorimetry, thermo-gravimetric analyses and infrared spectroscopy. The second blend, the one with equal amounts of HDPE and PLA seems to represent a good balance between high amount of bio-derived charge and acceptable mechanical properties. This suggests a good potential of these blends, which would be a good starting point for the production of composites with lingo-cellulosic fillers.

Three-dimensional (3D) printing technologies are transforming the design and manufacture of components and products across a variety of disciplines, however their application in the construction industry is still limited. Material deposition processes can achieve infinite geometries and have advanced from rapid prototyping and model-scale markets to their application in fabricating functional products, large objects and the construction of full-scale buildings. Many international projects have recently been realized and the construction industry is beginning to utilise these dynamic technologies. The potential advantages for integrating 3D printing into house construction are significant, these include the capacity for mass customization of designs and parameters for functional and aesthetic purposes, reduction in construction waste from highly precise material placement, and the use of recycled waste products in layer deposition materials. With the ultimate goal of improving construction efficiency and decreasing building costs, applying Strand7 Finite Element Analysis software, a numerical model was designed specifically for 3D printing in a cement mix incorporated with recycled waste product High Density Polyethylene (HDPE) and found that construction of an arched truss-like roof was structurally feasible without the need for steel reinforcements. The lab sizes prototypes were manufactured based on the destined numerical model by using a 3D printing technology. Currently available 3D printing technologies can be adopted for building construction and this paper discusses the applications, advantages, limitations and future directions of 3D printing as an innovative and viable solution for affordable house construction.

We propose a model for medium-term hydropower scheduling (MTHS) with variable head and uncertainty in inflow, reserve capacity, and energy price. With an increase of intermittent energy sources in the generation mix, it is expected that a flexible hydropower producer can obtain added profits by participating in other markets than just the energy market. To capture this added potential the hydropower system should be modeled with a higher level of details. In this context, we apply an algorithm based on stochastic dual dynamic programming (SDDP) to solve the nonconvex MTHS problem, and show that the use of Strengthened Benders (SB) cuts to represent the expected future profit (EFP) function provide accurate scheduling results for slightly nonconvex problems. A method to visualize the EFP function in a dynamic programming setting is provided, serving as a useful tool for a priori inspection of the EFP shape and its nonconvexity.

Lichens are traditionally divided into short “crustose”, intermediate “foliose” and tall “fruticose” types, a practice that hides a growth continuum. Substrate, temperature and water are thought to affect vertical growth, but such factors are difficult to measure, because, for example, the water actually available to lichens does not match rainfall patterns or even ground water levels. To reliably assess the effect of those factors, I recorded temperature, moisture, and substrate in and under individual terricolous lichen colonies in 60 fixed quadrats on April, August, October, and December of 2015 (Cerro de la Muerte, Costa Rica, 9°33′N; 83°45′W). The measurements were taken inside the colonies themselves (rather than on the general environment), covering an annual cycle of the relatively simple páramo habitat, where animals and vegetation have less impact than in lower ecosystems. The hypotheses were that lichens would grow taller on softer, warmer, and moister ground; on the Caribbean versant; and on the rainy season. Results matched the hypotheses, with one exception: lichens on soft ground were not taller than those on rock. Caribbean colonies were, on the average, 7 cm taller than those on the drier Pacific versant. Physiologically available water seems to be the main determinant of lichen vertical growth: more water means taller lichens and greater protection from climatic change for both the lichens and their microcommunities.

Reservoir computers (RCs) are a biology inspired computational framework for signal processing typically implemented using recurrent neural networks. Recent work has shown that Boolean networks (BN) can also be used as reservoirs. We analyze the performance of BN RCs, measuring their flexibility and identifying factors that determine effective approximation of Boolean functions that are applied in a sliding-window fashion over a binary signal, either non-recursively or recursively. We train and test BN RCs of different sizes, signal connectivity, and in-degree to approximate 3-bit, 5-bit and 3-bit recursive binary functions. We analyze how BN RC parameters and function average sensitivity, a measure of function smoothness, affect approximation accuracy as well as the spread of accuracies for a single reservoir. We found that approximation accuracy and reservoir flexibility are highly dependent on RC parameters. Overall, our results indicate that not all reservoirs are equally flexible and RC instantiation and training can be more efficient if this is taken into account. The optimum range of RC parameters opens up an angle of exploration for understanding how biological systems might be tuned to balance system restraints with processing capacity.

Zinc is mostly extracted from zinc oxide and sulfide minerals, and this process involves flotation as a key step. While it is easier to float the sulfide mineral, its consumption and depletion has led to an increased reliance on zinc oxide minerals, including smithsonite; hence the development of efficient ways of collecting smithsonite by flotation is an important objective. Herein, we describe the use of 2-(hexadecanoylamino)acetic acid (HAA), a novel surfactant, as a collector during smithsonite flotation. The mechanism and flotation performance of HAA during smithsonite flotation were investigated by total organic carbon (TOC) content studies, zeta potential measurements, FTIR spectroscopy, and XPS analyses, combined with micro-flotation experiments. The flotation results revealed that HAA is an excellent collector in pulp over a wide pH range (9–12) and at a relatively low concentration (2 × 10^‒4 mol/L), at which a recovery of close to 90% of the smithsonite mineral was obtained. TOC-content studies reveal that the good flotation recovery is ascribable to large amounts of collector molecule adsorbed on the smithsonite surface, while zeta potential measurements show that the HAA is chemically adsorbed onto the smithsonite. FTIR and XPS analyses reveal that the HAA-collector molecules adsorb onto the smithsonite surface as zinc-HAA complexes involving carboxylate moieties and Zn sites on the smithsonite surface in alkaline solution.

The purpose of the study is to control the ratio of programs of different genres when forming the broadcast grid in order to increase and maintain the rating of the channel. In the multichannel environment, television rating control consists of selecting such content, ratings of which are completely restored after advertising. A hybrid approach combining the benefits of semantic training and fuzzy relational equations in simplification of the expert recommendation systems construction is proposed. The problem of retaining the television rating can be attributed to the problems of fuzzy resources control. The increase or decrease trends of the demand and supply are described by primary fuzzy relations. The rule-based solutions of fuzzy relational equations connect significance measures of the primary fuzzy terms. Rules refinement by solving fuzzy relational equations allows avoiding labor-intensive procedures for the generation and selection of expert rules. The solution set generation corresponds to the granulation of the television time, where each solution represents the time slot and the granulated rating of the content. In automated media planning, generation of the weekly TV program in the form of the granular solutions provides the decrease of the time needed for the programming of the channel broadcast grid.

Though innovations for sustainable management of natural resources have emerged over time, the rising demand for nature based health solutions and integration of endemic flora into global value chains could have adverse impacts on ecosystems. The ecological risks in the exploitation of wild medicinal plant resources are exacerbated by a myriad of agrotechnological risks and challenges that highly constrain their domestication. Successful exploitation and commercialization of medicinal plants thus require a clear understanding of their demand and production systems or value chain analysis. Accordingly there is need for innovative approaches towards their integration into global value chains. Since quality and safety, traceability, certification, as well as, consumer tastes and preferences are critical drivers in purchasing decisions by global consumers, they are inadvertently exploited to weaken Indigenous knowledge (IK), undermine common property rights and entrench value chains that favour a few elite buyers. This tend to create pervasive incentives for overexploitation of medicinal plant resources and environmental degradation. Potential solution lies in the recognition of drivers of vulnerability to environmental degradation and the innovative use of policy bricolage, feedback loops and interactions between knowledge, power and agency on one hand, and collective action and property rights institutions on the other hand. We conceptualise a framework that can mediate a transformational agenda and enhance systematic understanding of sustainability lenses in endemic medicinal plant resources value chains. This could in turn strengthen IK, enhance collective action and promote participation of local actors with positive impact on the utilisation and integration of endemic medicinal plant resources into global value chains.

China historically exhibits spatial differentiation from population distribution to ecological or economic development, and the forest pest control work is an epitome of this tendency. In recent times, global warming, man-made monoculture tree plantations, increasing human population density and intensified international trade aggravate forest pest outbreaks. Although Chinese government has complied with the internationally recommended practices, few stones remain unturned due to existing differential regional imbalance of forest pest distribution and control abilities. Evidence shows that the high-income provinces in the south have taken advantage of economic and technological superiority, resulting in the adoption of more efficient pest-control measures. To the contrary, in economically underdeveloped provinces of the northwest, a paucity of financial support has led to serious threats of pest damage that almost mirrored the demarcations of the Hu Huanyong Line. In this paper, we propose introducing public-private partnership (PPP) model into forest pest control and combining the national strategies to enact regional prevention measures in order to break the current spatially differentiated trends in China.

In this work, silver nanoparticles (AgNPs) were synthesized rapidly and eco-friendlily using the extract of Mulberry leaves and aqueous solution of silver nitrate without any toxic chemical [1,2]. The Mulberry leaves extract acts as both reducing agent and stabilizing agent. The UV-Vis spectrum shows peak at 430 nm. The TEM image of synthesized AgNPs sample shows spherical shaped particles whose size range from 15 to 20 nm. TEM image of nano silver solution sample synthesized by microwave assisted method shows nearly spherical particles with an average particle size of 10 nm. The absorption UV-vis spectrum of silver nanoparticles synthesized by microwave assisted method (AgNPsmw) shows a sharp absorption band around 415 nm. After two month storage of AgNPsmw, the absorption spectrum of AgNPsmw was taken again. The UV-Vis spectrum shows negligible peak changes of silver nanoparticles have occurred after two months of storage. The synthesized AgNPs material could be used as an antimicrobial, used in the field of textile and in wastewater treatment.

The three heat-induced coffee contaminants acrylamide, furfuryl alcohol (FA) and 5-hydroxymethylfurfural (HMF) were analyzed in a collective of commercial samples as well as in Coffea arabica seeds roasted under controlled conditions from very light Scandinavian style to very dark Neapolitan style profiles. Regarding acrylamide, average contents in commercial samples were lower than in a previous study in 2002 (196 compared to 303 µg/kg). The roasting experiment confirmed the inverse relationship between roasting degree and acrylamide content, i.e. the lighter the coffee the higher the acrylamide content. However, FA and HMF were inversely related to acrylamide and found in higher contents in darker roasts. Therefore, mitigation measures must consider all contaminants and not be focused isolatedly on acrylamide, specifically since FA and HMF are contained in much higher contents with lower margins of exposure compared to acrylamide.

As part of our ongoing silybin project, this study aims to introduce a basic nitrogen-containing group to 7-OH of 3,5,20-O-trimethyl-2,3-dehydrosilybin or 3-OH of 5,7,20-O-trimethyl-2,3-dehydrosilybin via an appropriate linker for in vitro evaluation as potential anti-prostate cancer agents. The synthetic approaches to 7-O-substituted-3,5,20-O-trimethyl- 2,3-dehydrosilybins through a five-step procedure and to 3-O-substituted-5,7,20-O-trimethyl-2,3- dehydrosilybins via a four-step transformation have been developed. Thirty-two nitrogen-containing derivatives of silybin have been achieved through these synthetic methods for the evaluation of their antiproliferative activities towards both androgen-sensitive (LNCaP) and androgen-insensitive prostate cancer cell lines (PC-3 and DU145) using WST-1 cell proliferation assay. These derivatives exhibited greater in vitro antiproliferative potency than silybin. Among them, 11, 29, 31, 37, and 40 were identified as five optimal derivatives with IC50 values in the range of 1.40–3.06 µM, a 17- to 52-fold improvement in potency as compared with silybin. All these five optimal derivatives can arrest the PC-3 cell cycle in the G0/G1 phase and promote PC-3 cell apoptosis. Derivatives 11, 37, and 40 are more effective than 29 and 31 in activating PC-3 cell apoptosis.

One of the research priorities in atmospheric chemistry is to advance our understanding of heterogeneous reactions and their effect on the composition of the troposphere. Chemistry on aqueous surfaces is particularly important in this regard because of their ubiquity and expanse. They range from the surfaces of oceans (360 million km²), cloud and aerosol drops (~10 trillion km²) to the fluids lining the human lung (~200 m²). Typically, ambient air contains reactive gases that may affect human health, influence climate and participate in biogeochemical cycles. Despite their importance, reactions between gases and solutes at air-aqueous interfaces are not well understood. New, surface-specific techniques are required that detect and identify the intermediates and products of such reactions as they happen on liquids. This is a tall order because genuine interfacial reactions are faster than mass diffusion into bulk liquids, and may produce novel species at low concentrations. Herein, we review evidence that validates online pneumatic ionization mass spectrometry of liquid microjets dosed by reactive gases as a technique meeting such requirements. Next, we call attention to results obtained by this approach on reactions of ozone, nitrogen dioxide and hydroxyl radicals with various solutes on aqueous surfaces. The overarching conclusion is that the outermost layers of aqueous solutions are unique media, where equilibria shift and reactions proceed faster than, in some cases along different pathways from the bulk liquids. The fact that the rates and mechanisms of reactions at air-aqueous interfaces may not be deduced from experiments in bulk liquids opens new conceptual frameworks and lines of research, and adds an overlooked dimension to atmospheric chemistry.

A formulation of nonequilibrium thermo field dynamics has been performed using the nonequilibrium statistical operator method by D.N. Zubarev. Generalized transfer equations for a consistent description of kinetics and hydrodynamics of the dense quantum-field system with strongly coupled states are derived.

The new IoT/IoE (internet of things/everythings) paradigm and architecture permits to rethink about the way the Smart City infrastructures are designed and managed, on the other hand a number of problems have to be solved. In terms of mobility the cities that embrace the sensoring era can take advantage of this disruptive technology to improve the quality of life of their citizen, also thanks the rationalization in the use of their resources. In Sii-Mobility, a national smart city project on mobility and transportation, a flexible platform has been designed and here, in this paper, is presented. It permits to setup heterogeneous and complex scenarios that integrate sensors/actuators as IoT/IoE in an overall scenario of Big Data, Machine Learning and Data Analytics. A detailed and complex case-study has been presented to validate the solution in the context of a system that dynamically reverse the traveling direction of a road segment, with all the safety conditions in place. This case study composes several building blocks of the IoT platform, which demonstrate that a flexible and dynamic set-up is possible, supporting off-grid, security, safety, cloud and mixed solutions.

This paper addresses the effect of both microstructure and relative humidity on the long-term creep properties of sustainable calcium carbonate (CaCO₃) cements. Those can be prepared by mixing amorphous calcium carbonate and vaterite with water. A larger starting amount of vaterite, X_V, within the mixture design gives a higher elasticity and resistance to the specimens due to the larger overall bridging area within the newly formed calcite crystals. Regarding creep properties for a given relative humidity, the amplitude of creep strain decreases with X_V, and makes the relation between the elastic modulus, E, and hardness, H, of the samples to be linear with the contact creep modulus, C. On the other hand, for a given composition, the amplitude of creep increases with the relative humidity, making the contact creep modulus, Ci, to rise exponentially with the elastic modulus, E, and hardness, H, of the specimens. The most probable creep mechanisms for this kind of cement seem to be a combination of microcraking in the early stages and dissolution and reprecipitation of calcite in the long-term (also known as pressure solution theory). The presence of water in pores with increasing relative humidity might enhance the local dissolution of calcite, and hence the creep amplitude.

Heating systems such as heat pump and combined heat and power cycle systems (CHP) are representing a key component in the future smart grid. Their capability to couple the electricity and heat sector promises a massive potential to the energy transition. Hence, these systems are continuously studied numerical and experimental to quantify their potential and develop optimal control methods. Although numerical simulations provide time and cost-effective solution for system development and optimization, they are exposed to several uncertainties. Hardware in the loop (HiL) system enables system validation and evaluation under different real-life dynamic constraints and boundary conditions. In this paper, a HiL system of heat pump testbed is presented. This system is used to present two case studies. In the first case, the conventional heat pump testbed operation method is compared to the HiL operation method. Energetic and dynamic analyses are performed to quantify the added value of the HiL and its necessity for dynamics analysis. The second case, the HiL testbed is used to validate the heat pump operation in a single family house participating in a local energy market. It enables not only the dynamics of the heat pump and the space heating circuit to be validated but also the building room temperature. The energetic analysis indicated a deviation of 2% and 5% for heat generation and electricity consumption of the heat pump, respectively. The model dynamics emphasized the model capability to present the dynamics of a real system with a temporal distortion of 3%.

During the last decade, essential polyunsaturated fatty acids (PUFAs) such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) derived from marine sources have been investigated as nonpharmacological dietary supplements to improve different pathological conditions, as well as aging. The aim of this study was to determine the effects of dietary n-3 PUFA monoacylglycerides (MAG, both EPA and DHA) on the mitochondrial metabolism and oxidative stress of a short-lifespan model, Drosophila melanogaster, sampled at five different ages. Our results showed that diets supplemented with MAG-EPA and MAG-DHA increased median lifespan by 14.6% and decreased mitochondrial proton leak resulting in an increase of mitochondrial coupling. The flies fed on MAG-EPA also had higher electron transport system capacity and mitochondrial oxidative capacities. Moreover, both n-3 PUFAs delayed the occurrence of lipid peroxidation, but only flies fed the MAG-EPA diet showed maintenance of superoxide dismutase activity during aging. Our study therefore highlights the potential of n-3 PUFA monoacylglycerides as nutraceutical compounds to delay the onset of senescence by acting directly or indirectly on the mitochondrial metabolism, and suggests that Drosophila could be a relevant model for the study of the fundamental mechanisms linking the effects of n-3 PUFAs to aging.

The possibility of using additive manufacturing (AM) in the medicine area has created a new opportunities in health care. This has contributed to a sharp increase in demand for 3D printers, their systems and materials that are adapted to strict medical requirements. We described herein a medical-grade thermoplastic polyurethane (S-TPU), which was developed and then formed into a filament for Fused Deposition Modeling (FDM) 3D printers during a melt-extrusion process. S-TPU consisting of aliphatic hexamethylene 1,6-diisocyanate (HDI), amorphous α,ω-dihydroxy(ethylene-butylene adipate) (PEBA) and 1,4 butandiol (BDO) as a chain extender, was synthesized without the use of a catalyst. The filament properties were characterized by rheological, mechanical, physico-chemical and in vitro biological properties. The tests showed biocompatibility of the obtained filament as well as revealed no significant effect of the filament formation process on its properties. This study may contribute to expanding the range of medical-grade flexible filaments for standard low-budget FDM printers.

This study compared the use of chip and slash to minimize the loss of sediment on newly constructed forest road slopes and investigated the annual amount of sediment loss on bare forest road slopes. A runoff block (sample field) was established for each of the four designated test sites (two cutslopes and two fillslopes). Each block had three runoff plots. One of the runoff plots was left empty for the control (CNT), while chip (C) and slash (S), respectively, were deposited in the other two. A total of 108 water samples were taken from the test sites and the amount of their suspended sediment calculated in the laboratory. As a result of this study, it was determined that the amount of soil loss in the control plots was about 1.26 times higher than in the slash plots and 2.21 times higher than in the chip plots. According to the results of variance analysis on the amounts of sediment, a statistically significant difference was found between the suspended sediment quantities transported on the road slopes (P <0.05). However, no statistically significant difference between the suspended sediment quantities transported in the plots and the other variables of aspect, gradient or road slope was revealed by the t-test (P >0.05).

Background and Aim: Zinc plays a pivotal role in various zinc enzymes, resulting in the maintenance of liver function. Patients with chronic liver diseases (CLDs) usually have lower concentrations of zinc, which decrease further as liver fibrosis progresses. It remains unknown whether long-term zinc supplementation improves liver function and reduces the risk of hepatocellular carcinoma (HCC) development. Patients and Methods: Two hundred sixty-seven patients with CLDs who received a zinc preparation (Zn-group; 196 patients), or who did not receive zinc (no Zn-treatment group; 71 patients) were retrospectively analyzed in this study. The Zn-group was divided into 4 groups according to their serum Zn concentrations at 6 months after the start of Zn treatment. Results: Liver function significantly deteriorated in the no Zn-treatment group, while no notable change was observed in the Zn-group. The cumulative incidence rates of events and HCC at 3 years were lower in the Zn-group (9.5%, 7.6%) than in the no Zn-treatment group (24.9%, 19.2%) (p<0.001). According to the serum Zn concentrations, the cumulative incidence rates of events and HCC were significantly decreased in patients with Zn concentrations ≥ 70 µg/dl (p<0.001). Conclusion: Zinc supplementation appears to be effective at maintaining liver function and suppressing events and HCC development, especially among patients whose Zn concentration is greater than 70 µg/dl.

During the last decades, the production systems have developed different strategies to increase their competitiveness in the global market. In a manufacturing and services systems, Lean Manufacturing has been consolidated through the correct implementation of its tools. The present paper presents a case study developed in a Food Packer company where a Simulation Model was considered as an alternative to reduce the waste time generated by the poor distribution of operations and transportation areas for a product within the factory. As a matter of fact, the company has detected problems on the layout distribution that prevents to fulfill the market demand. In addition, the principal aim was to create a simulation model to test different hypothetical scenarios and alternative designs for the layout distribution without modifying its facilities. Moreover, the implemented methodology was based on classical models of simulation projects and a compendium of the manufacturing systems optimization by simulation process used during the last ten years. Also, a mathematic model supported by the Promodel ® simulation software was developed considering the company characteristics; along with the model development, it was possible to compare the production system performance from the percentage of used locations, the percentage of resources utilization, the number of finished products, and the level of Work in Process (WIP). Finally, the verification and validation stages were performed before running the scenarios in the real production area. The results generated by the implementation of the project represent an increase of 68% in the production capacity and a reduction of 5% in the WIP. In addition, both outcomes are associated with the resources management, which were reassigned to other production areas.

Free vibration analysis of the porous functionally graded circular plates has been presented on the basis of classical plate theory. The three defined coupled equations of motion of the porous functionally graded circular/annular plate were decoupled to one differential equation of free transverse vibrations of plate. The one universal general solution was obtained as linear combination of the multiparametric special functions for the functionally graded circular and annular plates with even and uneven porosity distributions. The multiparametric frequency equations of functionally graded porous circular plate with diverse boundary conditions were obtained in the exact closed-form. The influences of the even and uneven distributions of porosity, power-law index, diverse boundary conditions and the negligibled effect of the coupling in-plane and transverse displacements on the dimensionless frequencies of the circular plate were comprehensively studied for the first time. The formulated boundary value problem, the exact method of solution and the numerical results for the perfect and imperfect functionally graded circular plates have not yet been reported.

Associating the most influential parameters with the product distribution is of uttermost importance in complex catalytic processes such as fluid catalytic cracking (FCC). These correlations can lead to the information-driven catalyst screening, kinetic modeling and reactor design. In this work, a dataset of 104 uncorrelated experiments, with 64 variables, has been obtained in an FCC simulator using 6 types of feedstock (vacuum gasoil, polyethylene pyrolysis waxes, scrap tire pyrolysis oil, dissolved polyethylene and blends of the previous), 36 possible sets of conditions (varying contact time, temperature and catalyst/oil ratio) and 3 industrial catalysts. Principal component analysis (PCA) has been applied over the dataset, showing that the main components are associated with feed composition (27.41% variance); operational conditions (19.09%) and catalyst properties (12.72%). The variables of each component have been correlated with the indexes and yields of the products: conversion, octane number, aromatics, olefins (propylene) or coke, among others.

In recent years, biomedical research has faced increased scrutiny over issues related to reproducibility and quality in scientific findings(1-3). In response to this scrutiny, funding institutions and journals have implemented top-down policies for grant and manuscript review. While a positive step forward, the long-term merit of these policies is questionable given their emphasis on completing a check-list of items instead of a fundamental re-assessment of how scientific investigation is conducted. Moreover, the top-down style of management used to institute these policies can be argued as being ineffective in engaging the scientific workforce to act upon these issues. To meet current and future biomedical needs, new investigative methods that emphasize collective-thinking, teamwork, shared knowledge and cultivate change from the bottom-up are warranted. Here, a perspective on a new approach to biomedical investigation within the individual laboratory that emphasizes collaboration and quality is discussed.

The Greenland ice sheet is a major contributor to sea level rise, adding an estimated 0.47 +/− 0.23 mm/yr to global mean sea level between 1991 and 2015 (van den Broeke et al., 2016). Making sea level rise projections for the future and understanding the processes controlling current observed rates of sea level rise are crucially dependent on understanding the present-day state of the ice sheet. Here, we provide an overview of the current state of the mass budget of Greenland based on satellite gravimetry and remote sensing observations of surface elevation change, ice sheet velocity and calving front positions. We also combine these essential climate variables with a regional climate model (RCM) output from an ice sheet model (ISM) to gain insight into poorly understood ice sheet dynamical and surface mass processes. On average from 1992 to 2017 the ice sheet in some locations has lost up −2.65 m/yr in elevation based on ESA Radar altimetry analysis. Calving fronts have retreated all around Greenland since the 1990s and in only two out of 28 study locations have they remained stable. The locations of grounding lines at 5 key glaciers with floating ice tongues have remained stable over the observation period. However a detailed case study at Petermann glacier with an ice fracture model shows the sensitivity of these floating ice shelves to future climate change. GRACE gravimetric mass balance (GMB) data allows us to tie together disparate lines of evidence showing that Greenland has lost about 265 +/− 25 Gt/yr of ice over the period 2002 to 2015. RCM and ISM simulations show that surface mass processes dominate the overall Greenland ice sheet mass budget except for areas of fast ice sheet flow but marked differences between models and between models and observations indicate that not all processes are captured accurately, indicating areas of greater uncertainty and directions of future research for future sea level rise projections.

The primary and proven therapy, in cases of celiac disease (CD), is a rigorous gluten-free diet. However, there are reports of its negative effects in the form of nutritional deficiencies, obesity and adverse changes in body composition. The aim of the study was to assess the impact of a gluten free diet (GFD) on the body composition of children with CD. In a case-controlled study (n = 41; mean age 10.81 y; SD = 3.96) children with CD, in various stages of treatment, underwent medical assessment. The control group consisted of healthy children and adolescents, strictly matched for gender and age in a 1:1 case-control manner. More than half of the examined children (n = 26) followed a GFD. CD children had significantly higher mean values of the fat free mass (FFM% = 80.68 vs. 76.66, p = 0.015), and total body water (TBW% = 65.22 vs. 60.47, p = 0.012), and lower mean values of the fat mass (FM% = 19.32 vs. 23.34, p = 0.015). Children who were on a GFD presented slightly higher, but not statistically significant, mean values of FM and FFM, than children who did not follow dietary recommendations (FM [kg] = 7.48 vs. 5.24, p = 0.064; FM% = 20.81 vs. 16.73, p = 0.087; FFM [kg] = 28.19 vs. 22.62, p = 0.110). After minimum one year of a GFD, CD children showed significantly higher values of FFM [kg] (p = 0.001), MM [kg] (p < 0.001), TBW [L] (p < 0.001) and BCM [kg] (p < 0.001). Furthermore, CD children who were on a GFD presented significantly higher weight (p = 0.034) and body mass index (BMI) (p = 0.021) increase. The children adhering to a GFD demonstrate a tendency towards higher indices of selected body composition components.

The chapter presents the current state of research concerning the development of the BE + past participle constructions from Latin to Spanish. Starting from the description in Rosemeyer (2014) and the theoretical background collated in Kailuweit & Rosemeyer (2015), it will be shown that the functional change does not follow traditional grammaticalisation paths. Several concepts that deal with cases contradicting traditional grammaticalisation theory will be discussed. ‘Exaption’ (Lass 1990, 1997) focussing on total defunctionalisation does not account for the fact that the resultative value of the BE + past participle construction, marginal in Latin, becomes central in Mediaeval Spanish. ‘Refunctionalisation’ Smith (2008) captures this aspect in a more appropriate way. However, the development of the construction could be also conceived as the opposite of what Pountain (2000) describes as ‘capitalisation’: a process of ‘decapitalisation’ by which a feature is exploited not for wider, but for more restricted purposes.

In this work, we report the magnetocaloric effect (MCE) in a quantum dot corresponding to an electron interacting with an antidot, under the effect of an Aharonov-Bohm flux subjected to a parabolic confinement potential. We use the Bogachek and Landman model, which additionally allows the study of quantum dots with Fock-Darwin energy levels for vanishing antidot radius and flux. We find that the Aharonov-Bohm flux (AB-flux) strongly controls the oscillatory behaviour of the MCE, thus acting as a control parameter for the cooling or heating of the magnetocaloric effect. We propose a way to detect AB-flux by measuring temperature differences.

Technology advancements are evident in the healthcare field; numerous new opportunities and applications have emerged during the last years based on embedded intelligence and related to real-time diagnosis of medical issues, tele-care and telemedicine, remote monitoring of patients, computer-assisted “smart” transportation in case of emergencies, as well as new types of remotely controlled surgical operations. This paper aims to provide an overview of the application of embedded intelligence in the field of healthcare; it gathers the main critical requirements, related technologies and research advancements up to date, and it presents the most important challenges that are yet to be faced. The main focus is given in the development and optimization of Body Area Networks (BANs) based on advanced embedded sensing devices, the optimization of smart gateways in such networks, and the provision of holistic scalable and secure solutions in the healthcare domain. In addition, the paper presents two principal use cases that stem from the combination of novel information and communication technologies with classic healthcare practices, explaining the functional and non-functional requirements, as well as the mixed criticality characteristics of the associated systems.

Minerals might have played critical roles for the origin and evolution of possible life forms on Mars. The study of the interactions between “building blocks of life” and minerals relevant to Mars mineralogy under conditions mimicking the harsh Martian environment may provide key insight into possible prebiotic processes. Therefore, this contribution aims at reviewing the most important investigations carried out so far about the catalytic/protective properties of Martian minerals toward molecular biosignatures under Martian-like conditions. Overall, it turns out that the fate of molecular biosignatures on Mars depends on a delicate balance between multiple preservation and degradation mechanisms often regulated by minerals, which may take place simultaneously. Such a complexity requires more efforts in simulating realistically the Martian environment in order to better inspect plausible prebiotic pathways and shed light on the nature of the organic compounds detected both in meteorites and on the surface of Mars through in situ analysis.

Lead Acid Batteries (LABs) are used for starting, lighting, and igniting, as well as in air conditioning systems and to supply power to electric engines in transport vehicles (TVs). However, the application of LABs for TVs has faced a number of market challenges, mounted by the upcoming high energy density and long lifespan batteries, such as lithium ion. LABs, on the other hand, are inexpensive. The key research question is, how can the lifespan of LABs used in automotive industries be increased, while still ensuring a low cost solution? Thus, integrating LABs with the supercapacitor (known as an electric double layer capacitor—EDLC) is likely to outperform the competing alternative batteries for TVs. This paper proposes a multiple stage approach to hybrid lead acid batteries and a supercapacitor system for TVs that is capable of maintaining the battery state-of-charge (SOC) at statistically high limits, ranging between 90% and 95%. This SOC target will likely ensure that the lifespan of the hybrid battery system can be elongated (extended) more than its competitors. In this study, the multiple stage approach of concatenated converters has been designed in order to satisfy all energy storage requirements for different characteristics of LABs and the supercapacitor. The designed hybrid system has been simulated using Matrix Laboratory (MATLAB/Simulink (version R2016a, MathWorks, Natick, MA, USA)). The simulated results show that high transient currents from the direct current (DC) bus of LABs, caused by the regenerative braking or deceleration of the TVs, reduce the battery lifespan and induce mechanical stress. The supercapacitor reduces the stress on the LAB by absorbing high transient currents. This, in turn, keeps the LABs’ SOC between 90% and 96% and the voltage at 12 V. As indicated by the simulated results, the hybrid battery SOC is maintained at 90–96% and the terminal voltage is approximately 12 V.

The alignment of nanostructures in materials such as lyotropic liquid crystals (LLCs) templated materials has the potential to signicantly improve their performances. However, accurately characterising and quantifying the alignement of such fine structures remains very challenging. In situ small angle X-ray scattering (SAXS) and molecular dynamics were employed for the first time to understand the hexagonal LLC alignment process with magnetic nanoparticles under a magnetic field. The enhanced alignment has been illustrated from the distribution of azimuthal intensity in the samples exposed to magnetic field. Molecular dynamics simulations reveal the relationship between the imposed force of the magenetic nanoparticles under magnetic field and the force transferred to the LLC cylinders which leads to the LLC alignment. The combinational study with experimental measurement and computational simulation will enable the development and control of nanostructures in novel materials for various applications.

The VLSI industry is facing parasitic effects that trouble development in the nanoscale domain. However, instead of replacing the traditional MOSFET design, it would be more advantageous to apply different doping profiles and discerning which deal with specific parasitic effects the best. With a review of Gaussian doping, Uniform doping, and Delta doping profiles and analysis of the FET technology characteristics that use these doping profiles, a comparison can be made among them for integrated circuit design engineers. These doping profiles are compared based on how well they perform against non-ideal and ideal environments. Also, both digital and analog performance are measured to ensure the uniqueness of each doping profile that is present. After getting a list of benefits from each doping profile, it is derived to determine which doping profile works best against a host of parasitic effects and what type of application do these doping profiles have

Lithium titanates are used in various applications, such as anode materials for lithium intercalation (Li4Ti5O12) or breeding materials in fusion reactors (Li2TiO3). Here, we report the formation of nano-crystalline lithium titanates by a mechanochemical approach and present a deeper insight into their structural characteristics by PXRD and solid-state NMR spectroscopy. The compounds were synthesized in a high energy planetary ball mill with varying milling parameters and different grinding tools. NaCl type Li2TiO3 (α-Li2TiO3) was formed by dry milling of lithium hydroxide with titania (rutile or anatase) and by a milling induced structure transformation of monoclinic β Li2TiO3 or spinel type Li4Ti5O12. Heating of mechanochemical prepared α Li2TiO3 induces a phase transformation to the monoclinic phase similar to hydrothermal reaction products, but a higher thermal stability was observed for the mechanochemical formed product. Microstructure and crystallographic structure were characterized by PXRD via Rietveld analysis. Detailed phase analysis shows the formation of the cubic phase from the various educts. A set of two lattice parameters for α Li2TiO3 was refined, depending on the presence of OH- during the milling process. An average crystallite size of less than 15 nm was observed for the mechanochemical generated products. The local Li environment detected by 6Li SPE MAS NMR revealed Li defects in the form of tetrahedral instead of octahedral site occupation. Subsequent adjustment of the structural model for Rietveld refinement leads to better fits, supporting this interpretation.

In Hawaiʻi, the transition from customary subsistence flooded taro agroecosystems, which regulate stream discharge rate trapping sediment and nutrients, to a plantation-style economy (c. the 1840s) led to nearshore sediment deposition - smothering coral reefs and destroying adjacent coastal fisheries and customary fishpond mariculture. To mitigate sediment transport, Rhizophora mangle was introduced in estuaries across Hawai’i (c. 1902) further altering fishpond ecosystems. Here, we examine the impact of cultural restoration between 2012-2018 at Heʻeia Fishpond, a 600-800-year-old walled fishpond. Fishpond water quality was assessed by calculating water exchange rates, residence times, salinity distribution, and abundance of microbial indicators prior to and after restoration. We hypothesized that R. mangle removal and concomitant reconstruction of sluice gates would increase mixing and decrease bacterial indicator abundance in the fishpond. We find that Heʻeia Fishpond’s physical environment is primarily tidally driven; wind forcing and river flux are secondary drivers. Post-restoration, two gates in the northeastern region account for >80% of relative flux in the fishpond. Increase in exchange rates during spring and neap tide and shorter minimum water residence time corresponded with the reconstruction of a partially obstructed 56 m gap together with the installation of an additional sluice gate in the fishpond wall. Lower mean salinities post-restoration suggests increased freshwater influx due to R. mangle removal. Spatial distribution of microbial bio-indicator species inversely correlated with salinity. Average abundance of Enterococcus and Bacteroidales did not significantly change after restoration efforts, however, average abundance of a biomarker specific to birds nesting in the mangroves decreased significantly after restoration. This study demonstrates the positive impact of biocultural restoration regimes on water flushing and water quality parameters, encouraging the prospect of revitalizing this and other culturally and economically significant sites for sustainable aquaculture in the future.

Gas-liquid reactors pose transfer difficulties due to diffusion effects. It is necessary to master the aeration and hydrodynamics of the medium to conduct the reaction well and get a good performance. For this purpose, a study in a submerged membrane bioreactor with a useful volume of 30L, consisting of a microfiltration membrane with an average pore size of 0.14 mm having an effective surface area of 0.2 m2 and a PVC cylindrical air diffuser of radius 4 cm has been studied. The saline tracing method associated with a conductimetric follow-up made it possible to determine the residence times and the mixing time in the reactor at 4 different points both in recirculation and in the absence of recirculation. Gas retention was measured by the manometric method. The experiments were carried out at different temperatures of 25 ° C, at 45 ° C, with a variable air flow rate of 0.5 to 16 mL / s and different solutions (osmosis water, ammonium formate solution, solution ammonium formate + salt, synthetic rubber effluent). The results show that the mixing time varies from one point to another and the recirculation of the mixture reduces the mixing time. One of the positions is limiting, the transfer is done most by diffusion with a mixing time of 115 min without circulation and 65 min with circulation. Gas retention increases with aeration rate and temperature. On the other hand, the more the medium becomes rich in organic substances, the more the gaseous retention decreases. The homogeneous fine-bubble regime is obtained for an air flow rate of between 3 and 10 mL / s of aeration. Beyond this flow rate, the regime becomes heterogeneous without a transition phase for ammonium formate and formate ammonium + salt solutions.