Zimbabwe has ambitious and laudable GHG mitigation targets. Compared to a coal based future emissions reductions by 33% per capita by 2030 are targeted, by implementing a set of identified nationally determined contributions (NDCs). If historical climate conditions continue, it can do this at low or negative cost. However, anticipated conditions may not continue, and of the planned emissions reductions in the NDCs, 88% would come from the expansion of hydropower, which is driven by rainfall. If climate change causes the extreme droughts witnessed in recent years to become more frequent, embarking on Zimbabwe’s NDC future (underpinned by its official system development plan) may be expensive and further cripple the economy. Note that the economy is already being strangled by constrained power supplies due to unusually dry conditions in the Zambezi river basin. If the NDC Future is pursued, but the climate becomes drier, proactive efforts might be made to overcome the power shortages. However, this may result in a rapid ramp up of greenhouse gas emissions if the country turns to coal to reinforce its system and increase its resilience against hydropower vulnerability and the costs that would otherwise ensue. If the country were to keep its NDC investments and supplement them with more aggressive deployment of clean adaptation options, strongly positive outcomes appear possible. Specifically, this would require increased deployment of renewable energy technologies, a restructured power market, and deep increases in energy efficiency investments. In so doing, the country would not only exceed its NDC targets, but also reduce costs in a manner that is climate resilient. This would not remove the country's need for hydropower and some level of coal reliance. However, it will introduce requirements to ensure flexibility in both hydropower and coal power production. For hydropower, power stations will need to provide and be recompensed for providing ‘balancing services’, that is, storing water and producing electricity when the wind is not blowing, nor sun shining. In order to ensure continuous output from mines, it may require intelligent stockpiling combined with dynamic forecasting. This would apply not only to production in Zimbabwe, but potentially for neighboring countries. Doing so would allow predictable mining activities, but allow electricity systems to absorb low cost, low carbon hydropower at high rainfall periods. To make the NDCs resilient via clean adaptation, strong institutional restructuring is required. However, internalizing those costs and moving to advanced market structures and business cases may strain the capacity of current institutions.

Unrecorded alcohol comprises all types of alcohol that is not registered in the jurisdiction where it is consumed. In some countries in Central and Eastern parts of Europe as well as the Balkan, the major amount of unrecorded alcohol consumption may derive from homeproduction of fruit spirits. Some studies found a high prevalence of lead and cadmium in such spirits. This article provides a quantitative comparative risk assessment using the margin of exposure (MOE) methodology for lead and cadmium, compared to ethanol, for unrecorded fruit spirits. For average concentration levels, the lowest MOE (0.8) was calculated for ethanol (alcohol itself). For lead, the MOE was 13 for moderate daily drinking and 0.9 for the worst case. For cadmium, the MOE was 1982 for moderate daily drinking and 113 for the worst case. The results of this study are consistent with previous comparative risk assessments that ethanol itself comprises by far the highest risk of all compounds in alcoholic beverages. Regarding the metal contaminants, the risk of cadmium appears negligible, however, lead may pose an additional health risk in heavy drinking circumstances. Strategies to avoid metal contamination in settings of artisanal homeproduction of spirits need to be developed.

Wetlands are one of the crucial natural resources. They provide invaluable biodiversity resources, aid in water quality improvement, support ground water recharge, help in moderating climate change and support flood control. Environment is in the other hand, where we live and something, we are very familiar with our day to day life. Geographic Information Systems (GIS), Remote Sensing and Global Positioning System (GPS) were a useful tool for wetland and environmental change analysis and to improve on the classification accuracy. This study investigates population and environmental change of Jarmet wetland and its surrounding area change analysis over the period of 1972 to 2015. The purpose of this study was to show land use/ land cover change of Jarmet wetland and its surrounding environment over years as a response to population growth. For this purpose, multi-temporal satellite imageries (Landsat MSS 1972, TM1986, ETM+ 2000, 2005 and 2015 and SRTM 2000) were obtained and used for LULC change analysis, elevation analysis and change detection analysis. ERDAS Imagine 2015, ARC GIS 10.5.1, Global Mapper11, ENVI 5.0 and DNR Garmin softwares were used to process the image data and accuracy assessment analysis. The result of LULC showed that there is spatial reduction in wetland, forest, Shrubland and grassland in the period of 43 years (1972-2015) by -1,722.8 ha, -296.2 ha, -1,718.7 ha and -661.9 ha respectively, due to increase in the farmland and plantation area as a response to overpopulation, lack of environmental policy implementation and irresponsible for natural resource degradation. The accuracy assessment of LULC change are done for recent satellite image showed the overall accuracy of 84.06% with Kappa index 75.19% this means this classification is accurately classified and handle greater than 75% of error. Finally, this study suggests that create strictly natural resource conservation law, stopping illegal expansion of farmland, educating society about the value of natural resource especially wetland and create a source of income for society rather than farming.

The world is currently experiencing the fourth industrial revolution driven by the newest wave of digitisation in the manufacturing sector. The term Industry 4.0 (I4.0) represents at the same time: a paradigm shift in industrial production, a generic designation for sets of strategic initiatives to boost national industries, a technical term to relate to new emerging business assets, processes and services, and a brand to mark a very particular historical and social period. I4.0 is also referred to as Industrie 4.0 the New Industrial France, the Industrial Internet, the Fourth Industrial Revolution and the digital economy. These terms are used interchangeably in this text. The aim of this article is to discuss major developments in this space in relation to the integration of new developments of IoT and cyber physical systems in the digital economy, to better understand cyber risks and economic value and risk impact. The objective of the paper is to map the current evolution and its associated cyber risks for the digital economy sector and to discuss the future developments in the Industrial Internet of Things and Industry 4.0.

A large number of bridges are designed and built without considering seismic actions and, differently from buildings, there are currently no comprehensive guidelines to evaluate existing bridges without performing, as in the well known incremental dynamic analysis (IDA), complex non linear dynamic analyses (RHA). Bridges are structurally very different from building but, at the same time, are sensitive to higher modes as well as many multi-storey buildings that inspired innovative pushover procedures such as the well known modal pushover analysis (MPA). In the present study the incremental modal pushover analysis (IMPA), a pushover based approach already proposed and applied on buildings by the same authors, is revised and proposed for bridges (IMPAβ). IMPAβ accounts for the effects of higher modes in order to accurately estimate the seismic response of bridges; the effect of higher modes is considered by introducing a suitable number of modes to ensure the participation of a predefined total effective modal mass. The efficiency of the proposed method is demonstrated by conducting a study on two bridges, one regular and one irregular, and the IDA analysis is employed as reference solution. Numerical results indicate good accuracy of the proposed method in assessing the seismic response and a very good accuracy if compared to other available pushover procedures available in the literature.

Historically, the evaluation and assessment of the clinical response to treatment for canine back pain is subjective and relies on owner and clinician assessment of pain. This study evaluated the use of sequential infrared thermal images as a measure of the response of canine patients with back pain to a prescribed series of photobiomodulation therapy (PBMT) treatments. Qualifying participants had histories of pain and dysfunction associated with spinal osteoarthritis or intervertebral disk disease, or of non-specific uni- or bilateral back pain along the paravertebral epaxial muscles. Each patient was initially thermally imaged prior to PBMT treatment and then received multiple PBMT treatments delivered to the appropriate spinal area on days 1, 2, 3, and 4. Participants were reimaged on day 7. Thermal images provided an objective measure of superficial temperature changes over the area of PBMT treatment of each patient after the PBMT regimen. The temperature correlated with statistically significant changes in Colorado State University Canine Chronic Pain Scale scoring (CPS) and owner assessment using the Canine Brief Pain Inventory (CBPI), which includes a Pain Severity Score (PSS) and Pain Interference Score (PIS). The correlation of objective thermal imaging data with more subjective outcome measures suggests thermal imaging may be a valuable additional tool in monitoring therapy outcome.

The most effective method of determining the coordinates of the railway track axis is mobile satellite measurements. However, there are situations when the satellite signal may be disturbed (due to field obstructions) or completely disappear (e.g. in tunnels). Then the ability to measure the value of the directional angle of a moving rail vehicle using an inertial system comes in handy. The directional angle is determined on a topographic map as the angle between the direction of the vehicle longitudinal axis (or the direction of a tangent to the track axis) and the reference direction, which is the north. The article presents a method for determining the directional angle of a railway line based on appropriate measurement data. The latter should be Cartesian coordinates of the track axis, allowing for the visualization of a given railway route and obtaining a general orientation about its course. The presented proposal for solving the problem refers to the assumptions made in the method of determining the curvature of the railway track axis using the moving chord.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

Objectives To develop and validate a prediction model for 28-day in-hospital mortality among adult patients critically ill with COVID-19 in the UK. Design Observational cohort study. Setting 287 adult critical care units in England, Wales and Northern Ireland, of which 260 admitted at least one eligible patient. Participants 10,933 patients with confirmed COVID-19 of whom 10,401 were eligible (excluding 532 patients with a duration of critical care less than 24 hours and 1 patient with unknown 28-day outcome): 8,666 development (March-April 2020) and 1,735 temporal validation (May-August 2020). Main outcome measures 28-day in-hospital mortality from start of critical care. Results Two models were developed using 14 patient level predictors selected from 30 candidate predictors, with and without adjustment for calendar time. In the temporal validation data, the model discrimination was maintained (c index 0.78) but calibration was poor, particularly for the model not adjusted for calendar time (ratio of observed to predicted mortality 0.74 versus 0.88 for the model adjusted for calendar time). Conclusions We developed and validated a prediction model for 28-day in-hospital mortality for patients critically ill with COVID-19. Although absolute predictions were inaccurate due to changing outcomes, the models will support risk-adjustment in analyses and monitoring changes in risk-adjusted outcome over time.

Indoor air quality and public health have always been an area of prime interest across the globe. The significance of low-cost air quality sensing and indoor public health practices spikes during the time of pandemic and epidemics when indoor air pollution becomes a threat to living beings especially human beings. Indoor diseases are hard to diagnose if they are due to the indoor environmental conditions. A major challenge was observed in establishing a baseline between the indoor air quality sensors and associated diseases. In this work, 10,000+ articles from top literature databases were reviewed using bibliometric analysis to formulate indoor air quality sensors and diseases correlation rubrics to critically review 500+ articles. A set of 200+ articles were selected based on for detailed study based on seven bibliometric indices for publications that used WHO, NIH, US EPA, CDC, and FDA defined principles. This review has been conducted to assist end-users, public health facilities, state agencies, researchers, scientists and air quality protection agencies.

This research focuses on developing a Student Performance Evaluation System to enhance effectiveness and oversight in higher education. The system aims to address challenges faced by instructors in evaluating student performance using a distributed system approach. Agile methodology is employed in development, and database replication techniques are applied for data synchronization. System features include registration, assessment form creation, assessment submission, statistical visualization, and access to assessment history. The system is designed to improve efficiency and transparency in the assessment process. Key features of the system include registration process, assessment form creation, assessment submission, statistical visualization, and access to assessment history. Its goal is to enhance efficiency and transparency throughout the assessment process. The article details the system workflow and the roles played by Admins, Instructors, and students in system usage. Additionally, it discusses the back-end development model and pathways, as well as the performance testing results. Performance testing indicates that the system achieves high throughput of up to 21.55 requests per second, with an average response time of only 34 milliseconds and an error rate of zero percent. These results affirm that the system efficiently handles user loads and nearly instantaneously responds to requests, providing an optimal user experience in the context of student performance evaluation in higher education.

Air quality and environmental fairness have always been an area of prime interest across the globe. The significance low-cost air quality sensing and practices spikes during the time of pan-demic and epidemics when the air becomes a threat to living beings especially human beings. The gradual innovation and enrichment in low-cost air quality sensing sensors, nodes or devices, and systems are exponentially increasing for the last three decades. This work reviews the major contributions in a) low-cost scalable air quality assessment; b) low-cost air quality sensors, sensing approaches and technologies; c) low-cost state-of-the-art gas sensors fabrication methods (MEMS and CMOS); d) low-cost gas sensors measurement configurations and assemblies; and e) low-cost air quality sensors calibration and testing systems. A systematic review of past work with a goal to assist end-users, public health facilities, state agencies, researchers, scientists and air quality protection agencies has been rendered in this work. Starting from sensors electrodes to IoT based mobile smart nodes; all have been introduced in this article.

It remains unclear in the literature what is the cause of the so-called alkali-carbonate reaction (ACR) damage to concrete yet, a consensus is reached when considering dedolimitization as non-expansive. However, expansion and cracks as distress features are often attributed to alkali-silica reaction (ASR) when evidence of a reactive mineral is found in the aggregate. Evidently, different types of aggregates may produce different types and degrees of damage. Therefore, this work aims to assess the damage to concrete generated and propagated by the so-called ACR susceptible reactive Kingston coarse aggregate through mechanical testing (i.e., direct shear test), microscopy (the damage rating index – DRI), and other techniques. Distinct induced expansion levels (i.e., 0%, 0.05%, 0.12%, and 0.20%) were selected to compare the distress caused by ACR to concrete affected by ASR. Result show that the behaviour of ACR, namely as captured through the DRI, is inconsistent with that of ASR thus attesting to ACR being a distinct distress mechanism.

This work describes a new transducer prototype for continuous monitoring both in the structural and geotechnical fields. The transducer is synthetically constituted by a wire of optical fiber embedded between two fiber tapes (fiberglass or carbon fiber) and glued by a matrix of polyester resin. The fiber optical wire ends have been connected to a control unit whose detection system is based on Brillouin optical time-domain frequency analysis. Three laboratory tests were carried out to evaluate the sensor's reliability and accuracy. In each experiment, the transducer was applied to a sample of inclinometer casing sets in different configurations and with different constraint conditions. The experimental data collected were compared with theoretical models and with data obtained from the use of different measuring instruments to perform validation and calibration of the transducer at the same time. Several diagrams allow comparing the transducer and highlighting its suitability for monitoring and maintenance of structures. The characteristic of the transducer suggests its use as a mixed system for reinforcing and monitoring, especially in lifetime maintenance of critical infrastructures such as transportation and service networks, and historical heritage.

The introduction of the Internet of Things (IoT), i.e. the interconnection of embedded devices over the Internet, has changed the world we live in from the way we measure, make calls, print information and even the way we get energy in our offices or homes. The convenience of IoT products, like CCTV cameras, IP phones, and oscilloscopes, is overwhelming for end-users. In parallel, however, security issues have emerged and it is essential for infrastructure providers to assess the associated security risks. In this paper, we propose a novel method to detect IoT devices and identify the manufacturer, device model, and the firmware version currently running on the device using the page source from the web user interface. We performed automatic scans of the large-scale network at the European Organization for Nuclear Research (CERN) to evaluate our approach. Our tools identified 233 IoT devices that fell into eleven distinct device categories and included 49 device models manufactured by 26 vendors from across the world.

The purpose of work is to quantify the changes of the organism functional reserves during the successive phases of the human health Space-Time Continuum (STC) on the basis of postulates of reliability complex systems theory. The study is devoted to the problem of age-related human involution, which is evaluated not from the causal, but from the kinetic point of view. The analysis of 10 most important basic life support systems of human body — cardiovascular (CVS), respiratory (RS), nervous (NS), digestive (DS), endocrine (ES), immune (IS), excretory (EXS), brain (BS), musculo-skeletal (MSS), hematopoietic (HS) was carried out. Based on this analysis two levels of ensuring the reliability of organism’s work were revealed: sequential and parallel. The system of logical equations for reduced sequential system is: Ys1 = CVS ∧ RS ∧ BS, where ∧ is the notation for the conjunctions of set elements. The system of logical equations for the reduced parallel system is: Ys2 = NS ∨ DS ∨ ES ∨ IS ∨ HS ∨ EXS ∨ MSS ,where ∨ is the disjunction of the scheme elements. Visualization of human STC changes the concept of the kinetics of age-related changes in the organism and the role of determinants of health as a stable factor accompanying a uniform, smooth transition from the most pronounced functions of the body to their gradual extinction. For human STC is formulated the following regularity kinetics of involutionary processes: after 30 years of age in the human body morphological changes regress in arithmetic progression, and the functions of organs in a geometric one. Assumption of health as a state redundancy of functions is suggested.

Oil immersed paper insulation condition is a crucial aspect of power transformer’s life condition diagnostic. The measurement testing database collected over the years made it possible for researchers to implement classification analysis to in-service power transformer. This article presents classification analysis of transformer oil-immersed paper insulation condition. The measurements data (dielectric characteristics, dissolved gas analysis, and furanic compounds) of 149 transformers with primary voltage of 150 kV had been gathered and analyzed. The algorithm used for developing classification model is Support Vector Machine (SVM). The model has been trained and tested using different datasets. Different models have been created and the best chosen, resulting in 90.63% accuracy in predicting the oil-immersed paper insulation condition. Further implementation was executed to classify oil-paper condition of 19 Transformers which Furan data is not available. The classification results combined, reviewed, and compared to conventional assessment methods and standards, confirming that the model developed has the ability to do classification of current oil-paper condition based on Dissolved Gasses and Dielectric Characteristics.

The scarcity and pollution of freshwater are extremely crucial issues today and the expansion of water reuse have been considered as an option to reduce its impact. This study aims to assess the efficiency of an integrated greywater treatment system and hydroponic lettuce production as a part of a green wall structure and to evaluate the health risk associated with the production and consumption of lettuce through quantitative microbial risk assessment (QMRA) and chemical health risk assessment. The study was conducted based on the unique configuration of source separation system; on-site greywater treatment system; green wall structure as a polishing step; and hydroponic lettuce production in the green wall structure. The final effluent from the system was used to grow three lettuce varieties by adding urine as a nutrient solution. Both water samples and plant biomass were collected and tested for E. coli and heavy metals contamination. The system has gained a cumulative 5.1 log10 reduction of E. coli in the final effluent and no E. coli found in the plant biomass. QMRA results indicated that the system attained the health-based targets, 10–6 DALYs per person per year. Similarly, health risk index (HRI) and targeted hazard quotient (THQ) results did not exceed the permissible level, thus the chemical health risk concern was insignificant.

Wind technology is considered to be among the most promising types of renewable energy sources, and due to high oil prices and growing concerns about climate change and energy security, it has been the subject of extensive considerations in recent years, including questions related to the relative sustainability of electricity production when the manufacturing, assembly, transportation and dismantling processes of these facilities are taken into account. The present article evaluates the environmental impacts, carbon emissions and water consumption, derived from the production of electric energy of the Villonaco wind farm, located in Loja-Ecuador, during its entire life cycle, using the Life Cycle Analysis method. Finally, it is concluded that wind energy has greater environmental advantages, since it has lower values of carbon and water footprints than other energy sources. Additionally, with the techniques Cumulative Energy Demand and Energy Return on Investment, sustainability in the production of electricity from wind power in Ecuador is demonstrated; and, that due to issues of vulnerability to climate change, the diversification of its energy mix is essential considering the inclusion of non-conventional renewable sources such as solar or wind, this being the only way to reduce both the carbon footprint and the water supply power.

Electric moped scooter sharing services have recently experienced strong growth rates, particularly in Europe. Due to their compactness, environmental-friendliness and convenience, shared e-mopeds are suitable modes of transport in urban mobility to help reduce the environmental impact. However, its traffic-related, economic and environmental effects are merely represented in academic research. We used passenger car traffic data in Berlin generated by the multi-agent transport simulation framework MATSim to develop a python-based simulation, resembling an e-moped sharing system. Based on the results, a total cost of ownership and a life cycle assessment for fleet sizes of 2,500, 10,000 and 50,000 vehicles were conducted. The results indicate that a substantial part of all passenger car trips in Berlin can be substituted. The larger the fleet, the more and longer trips are replaced. Simultaneously, the efficiency in terms of fleet utilization decreases. The scenario with 10,000 e-mopeds offers the lowest total distance-based costs for sharing operators, whereas a fleet consisting of 2,500 vehicles exhibits the lowest environmental emissions per kilometer driven over the expected lifespan of a shared e-moped. Based on the renewable energy potential for 2050 forecasted by the German Federal Environment Agency, a significant overall decline in environmental impacts can be achieved.

Assessment of the percentage of disease infected lung volume using computed tomography (CT) images can play an important role to detect lung diseases and predict disease severity. However, manual segmentation of disease infected regions from many CT image slices is tedious and not feasible in clinical practice. To help solve this clinical challenge, this study aims to investigate a new strategy to automatically segment disease infected regions and predict disease severity. We employed a public dataset acquired from 20 COVID-19 patients, which includes manually annotated lung and infections masks, to train a new ensembled deep learning (DL) model that combines the five customized residual attention UNet models to segment disease infected regions followed by a Feature Pyramid Network (FPN) model to classify severity stage of COVID-19 infection. To test potentially clinical utility of new model, we first gathered and processed another set of CT images acquired from 80 Covid-19 patients. Next, we asked two chest radiologists to read CT images of each patient and report the estimated percentage of infected lung volume and disease severity level. Additionally, we asked radiologists to rate acceptance of DL model-generated segmentation results using a 5-scale rating method. Data analysis results show that agreement between disease severity classification is >90% in 45 testing cases. Furthermore, >73% of cases received the high rating score from two radiologists (scored more than 4). This study demonstrates feasibility of developing a new DL-model to efficiently provide quantitative assessment of disease severity based on the automated segmentation of the disease infected regions to support improving efficacy of radiologists in disease diagnosis.

Background: Macrophage inflammatory protein-1 alpha (MIP-1α) and C-reactive protein (CRP) are pro-inflammatory biomarkers that quantify clinical and subclinical inflammation in cardiac ischemia in cardiac inflammation and disease. Adiponectin is an anti-inflammatory marker associated with good health. The susceptibility of periodontitis patients to cardiovascular events needs to be evaluated. Objective: This study aims to assess the levels of biomarkers in periodontitis patients with and without acute myocardial infarction (AMI) compared to controls. Material and methods: Pro-inflammatory and anti-inflammatory analytes were examined by collecting unstimulated saliva from three groups (n = 20/each): healthy individuals, individuals with stage III periodontitis, and post-myocardial infarction patients with stage III periodontitis. The samples were collected within 48 hours of AMI. Results: Adiponectin levels were significantly lower in patients with periodontitis with and without AMI compared to controls, while CRP and MIP-1α were significantly higher in patients with periodontitis with and without AMI compared to controls. The highest titers for MIP-1α and CRP were detected among patients with periodontitis with and AMI. Conclusion: Our study provides evidence of the association between periodontitis and salivary analytes that occur in tandem with cardiovascular disease. The lower levels of Adiponectin and higher levels of CRP and MIP-1α in patients with periodontitis indicate that this condition is a potential risk factor for cardiovascular disease. The findings emphasize the importance of early detection and intervention for periodontitis patients to prevent cardiovascular events.

This paper presents a new methodology to derive and analyze strategies for a fully decarbonized urban transport system which combines conceptual vehicle design, a large-scale agent-based transport simulation, operational cost analysis, and life cycle assessment for a complete urban region. The holistic approach evaluates technical feasibility, system cost, energy demand, transportation time and sustainability-related impacts of various decarbonization strategies. In contrast to previous work, the consequences of a transformation to fully decarbonized transport system scenarios are quantified across all traffic segments, considering procurement, operation and disposal. The methodology can be applied to arbitrary regions and transport systems. Here, the metropolitan region of Berlin is chosen as a demonstration case. First results are shown for a complete conversion of all traffic segments from conventional propulsion technology to battery electric vehicles. The transition of private individual traffic is analyzed regarding technical feasibility, energy demand and environmental impact. Commercial goods, municipal traffic and public transport are analyzed with respect to system cost and environmental impacts. We can show a feasible transition path for all cases with substantially lower greenhouse gas emissions. Based on current technologies and today’s cost structures our simulation shows a moderate increase in total systems cost of 13-18%.

In today’s rapidly evolving digital landscape, the significance of password guessing techniques in both offensive and defensive strategies is paramount. Passwords serve as a crucial line of defense for both individuals and corporations, safeguarding their sensitive systems and data. Therefore, assessing the effectiveness of these access credentials is a critical task. However, existing research in this field often encounters limitations, such as a lack of sufficient training data and extended model training times. Current methods often struggle with limited training data and lengthy training times. This paper introduces BBPE-AE, a novel Auto Encoder Network (AE) designed for password guessing. BBPE-AE utilizes Byte-level Byte Pair Encoding (BBPE) to extract frequent tokens from password datasets without length restrictions, employing a dynamic window technique to capture complex patterns. Experimental results on Hotmail and Myspace datasets demonstrate exceptional performance, achieving high similarity rates (BLEU-Unigram: 0.90, BLEU-Bigram: 0.82 for Hotmail; BLEU-Unigram: 0.90, BLEU-Bigram: 0.81 for Myspace). BBPE-AE generates realistic passwords that meet HIBP (Have I Been Pwned) standards, minimizing duplication. These findings highlight the effectiveness of BBPE-AE in enhancing security by generating realistic passwords, ultimately safeguarding sensitive systems and data.

Smart home and building systems are popular solution that support maintaining comfort, safety and improving energy efficiency in buildings. However, dynamically developing distributed network technologies, in particular the Internet of Things, are increasingly entering the above-mentioned application areas of building automation, offering new functional possibilities. The result of these processes is the emergence of many different solutions that mix technologies of field-level and ICT networks in various configurations and architectures. New paradigms are also emerging, such as edge and fog computing, providing support for local monitoring and control networks in the implementation of advanced functions and algorithms, including machine learning and artificial intelligence mechanisms. This paper collects state-of-the-art information in these areas, along with a systematic review of the literature, case-studies and an analysis of selected development trends. The author systematized this information in the context of the potential development of building automation systems. Based on the conclusions of this analysis and discussion, a framework for the development of the Generic IoT paradigm in smart home and building applications has been proposed, along with a SWOT analysis of its usability. Future works are proposed as well.

In the construction business, which is known for its intricate and strategic nature, it is crucial to have efficient risk management in place. This is because various internal and external elements can cause disruptions to projects. Although the industry has had a historically negative reputation for risk analysis, the methodical process of identifying, analyzing, and managing risks has been more widely recognized and respected. This paper examines the historical progression of construction risk management, highlighting the need to identify and classify risks promptly. The study examines various risk factors related to finance, law, environment, and logistics. The study explores various risk management strategies, such as contract management, risk distribution, evaluation, mitigation, and sharing. The article discusses the significant impact of risk management software, such as Procore, PlanGrid, e-Builder, Autodesk BIM 360, and Oracle Primavera, on improving project results. The study finishes by highlighting the importance of proactive risk management in protecting against financial losses and maintaining a reputation in the construction business.

This paper examines the use of business maturity models as a tool for achieving business maturity and improving organizational performance in a rapidly changing business environment. Specifi-cally, the paper evaluates existing maturity models and methodologies, analyzes their effective-ness, and develops a novel and enhanced model tailored to the oil and gas sector. The authors highlight the importance of considering fundamental factors that underlie the implementation of maturity models and the need to evaluate their fit with organizational goals and values. The pa-per concludes by emphasizing the ongoing nature of business maturity and the effectiveness of theproposed Business Maturity Framework (BMF) model in enhancing operational excellence, competitiveness, and sustainable growth in the oil and gas industry. The paper makes a notable contribution to the specialized literature precisely through the differ-ent approaches to the business maturity process and through the proposed business maturity model itself as a base of strategy formulation, which includes a new dimension. This dimension analyzes whether the market and customers are ready for the level of digitization that the com-pany wants to achieve in a future state.

Objective: This study assessed hearing aid benefits for people with a normal audiogram but hearing-in-noise problems in everyday listening situations. Design: Exploratory double-blinded case control study whereby participants completed retrospective questionnaires, ecological momentary assessments, speech-in-noise testing, and mental effort testing with and without hearing aids. Twenty-seven adults reporting speech-in-noise problems but normal air-conduction pure-tone audiometry took part in the study. They were randomly separated into an experimental group who trialled mild-gain hearing aids with advanced directional processing and a control group fitted with hearing aids with no gain or directionality. Results: Self-reports showed mild-gain hearing aids reduce hearing-in-noise difficulties and provide a better hearing experience (i.e., improved understanding, participation, and mood). Despite the self-reported benefits, the laboratory tests did not reveal a benefit from the mild-gain hearing aids, with no group differences on speech-in-noise tests or mental effort measures. Further, participants found the elevated cost of hearing aids to be a barrier for their adoption. Conclusions: Hearing aids benefit the listening experience in some listening situations for people with normal audiogram who report hearing difficulties in noise. Decreasing the price of hearing aids may lead to greater accessibility to those seeking remediation for their communication needs.

Heart Rate Monitors (HRMs) are an indispensable tool for controlling training parameters of healthy athletes. They became a source of information about stress heart rhythm disturbances, recognized as unexpected increases in heart rate (HR), which can be life-threatening for athletes. Most HRMs do not recognize the type of arrhythmia, confusing them with artifacts. The aim of the study was to assess the usefulness of ECG recording functions by sports HRMs among endurance athletes, coaches, and physicians in comparison with other basic and hypothetical functions. We conducted 3 surveys among endurance athletes (76 runners, 14 cyclists, and 10 triathletes), as well as 10 coaches and 10 sports doctors to obtain information on how important ECG recording is, and what functions of HRMs should be improved to meet their expectations in the future. The respondents were asked questions regarding use and hypothetical functions, as well as preference for HRM type (optical/strap). For athletes, the 4 most important functions were distance traveled, pace, instant heart rate, and information about reaching the oxygen threshold. ECG recording was the 8th and 9th most important for momentary and continuous, respectively. Coaches opined more importance to ECG recording. Doctors placed ECG recording as most important. All participants preferred optical HRMs to strap HRMs. Research on the improvement and implementation of HRM functions shows slightly different preferences of athletes compared to coaches and doctors. Suspected arrhythmia increases the value of the HRM’s ability to record ECGs during training by athletes and coaches. For doctors, this is the most desirable feature in any situation. Considering the expectations of all groups continuous ECG recording during training will significantly improve the safety of athletes.

Wave energy converter (WEC) arrays deployed in coastal regions may create physical disturbances potentially resulting in environmental stresses. Presently, limited information is available on the nature of these physical disturbance or the resultant effects. A quantitative Spatial Environmental Assessment Tool (SEAT) for evaluating potential effects of wave energy converter (WEC) arrays on nearshore hydrodynamics and sediment transport is presented for the central Oregon coast (USA) through coupled numerical model simulations of an array of WECs. Derived climatological wave conditions were used as inputs to the model to allow for the calculation of risk metrics associated with various hydrodynamic and sediment transport variables such as maximum shear stress, bottom velocity, and change in bed elevation. The risk maps provided simple, quantitative, and spatially-resolved means of evaluating physical changes in the vicinity of a hypothetical WEC array in response to varying wave conditions. Near-field risk of sediment mobility was determined to be moderate in the lee of the densely spaced array, where the potential for increased sediment deposition could result in benthic habitat alteration. Modifications to the nearshore sediment deposition and erosion patterns were observed near headlands and topographic features, which could have implications for littoral sediment transport. The results illustrate the benefits of a risk evaluation tool for facilitating coastal resource management at early market marine renewable energy sites.

The COVID19 pandemic had a major impact on emergency medical communication centres (EMCC). A live video facility was made available to second-line physicians in an EMCC with a first-line paramedic to receive emergency calls. The objective of this study was to measure the contribution of live video to remote medical triage. The single-centre retrospective study included all telephone assessments of patients with suspected COVID19 symptoms from 01.04.2020 to 30.04.2021 in Geneva, Switzerland. The organisation of the EMCC and the characteristics of patients who called the two emergency lines (official emergency number and COVID19 number) with suspected COVID19 symptoms were described. A prospective web-based survey of physicians was conducted during the same period to measure the indications, limitations and impact of live video on their decisions. 8,957 patients were included. 2,157 (48.0%) of the 4,493 patients assessed on the official emergency number had dyspnoea. 4,045 (90.6%) of 4,464 patients assessed on the COVID19 number had flu-like symptoms. 1,798 (20.1%) patients were reassessed remotely by a physician, including 405 (22.5%) with live video, successfully in 315 (77.8%) attempts. The web-based survey (107 forms) showed that physicians used live video to assess mainly the breathing (81.3%) and general condition (78.5%) of patients. They felt that their decision was modified in 75.7% (n=81) of cases, and caught 7 (7.7%) patients in life-threatening emergency. Medical triage decisions for suspected COVID19 patients are strongly influenced by the use of live video.

The increasing rate of adoption of innovative technological achievements along with the penetration of the Next Generation Internet (NGI) technologies and Artificial Intelligence (AI) in the water sector, are leading to a shift to a Water-Smart Society. New challenges have emerged in terms of data interoperability, sharing, and trustworthiness due to the rapidly increasing volume of heterogeneous data generated by multiple technologies. Hence, there is a need for efficient harmonisation and smart modeling of the data to foster advanced AI analytical processes which will lead to efficient water data management. The main objective of this work is to propose two Smart Data Models focusing on the modeling of the Satellite Imaginary data and the Flood Risk Assessment processes. The utilisation of those models reinforces the fusion and homogenisation of diverse information and data facilitating the adoption of AI technologies for flood mapping and monitoring. Furthermore, a holistic framework has been developed and evaluated via qualitative and quantitative performance indicators revealing the efficacy of the proposed models concerning the usage of the models in real cases. The framework is based on the well-known and compatible technologies on NGSI-LD standards which are customised and applicable easily to support the water data management processes effectively.

To proactively manage information security, enterprises often employ information security risk assessment techniques. Asset value - which is used to calculate the financial impact of possible threats - is one of the key parameters of information security risk. However, assets in a system are rarely independent, and their values are typically interdependent. Asset owners and IT teams may hold different views as regards these values, and there is thus the need to reduce subjectivity in a qualitative risk assessment. The research entails the development of a conceptual framework derived from the literature to minimize subjectivity, and the design of a system based on those concepts. The study uses the Unified Modeling Language as a design tool and puts forward an object-oriented model for defining asset values, in which the relationships between assets, vulnerabilities and related threats are identified. A “segregation of duties” approach is integrated into the risk management system to mitigate against subjectivity and better determine asset values. Survey responses from 16 practitioners working in the private and public sectors confirm the validity of the approach, but suggest it may be more workable in larger organisations where resources allow dedicated risk professionals to operate.

Triangles are an ever present feature in nature, which the building construction industry duly echoes. However, an exact expression intended to offer the radiant field due to any triangle in an upright or inclined position had not been identified by previous research. In this case, the author has been able to solve by direct integration, the canonical expression of radiative transfer. This result alone confers a myriad of possibilities that had been inconceivable before, for studying in detail the three-dimensional heat transfer behavior of volumes and figures in which triangles do manifest, such as fins, windows, roof-gables and louvers of various kinds. Typically, shading devices, when tilted, give rise in their extremes to rhomboidal shapes which were difficult to take into account or had to be subject to discretization and subsequent Monte Carlo methods in order to perform an approximate calculation of their emission. This implied a lengthy and inexact procedure that induced many errors and consumed computing time. We can now avoid all the former downsides due to the advances hereby presented. As the novel expression can be converted into an algorithm it will be advantageously employed for simulation. This significant finding dovetails in the intricate puzzle of radiated heat and we believe that their consequences will greatly affect the conception and design of HVAC devices, aircraft manufacturing and specifically building or lighting industries among others.

There is a systematic exclusion of gender-based violence, safe abortion, reproductive cancers, infertility services, comprehensive sexuality education, sexuality services, and STI’s other than HIV in essential health packages in LMICs. To accelerate progress on sexual reproductive health (SRH), the Guttmacher–Lancet Commission proposed the adoption of these interventions into an essential health package of SRH services that should be universally available. In this commentary, we use a healthcare priority-setting processes lens to review the importance of these services for universal health coverage. We isolate inherent challenges in social value judgments for terminal, process and content evidence for their healthcare priority-setting. We then advance promising emerging practical examples from low to middle-income countries on evidence-informed decision-making processes. We recommend capacity development through regional support, generating equity and efficiency evidence and strengthening political and publicly acceptable processes to institutionalise and operationalise evidence-informed decision-making.

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

This paper presents an overview of EREMI, a two-year project funded under ERASMUS+ KA203, and its results. The project team's main objective was to develop and validate an advanced interdisciplinary higher education curriculum, which includes lifelong learning components. The curriculum focuses on enhancing resource efficiency in manufacturing industries and optimizing poorly or non-digitized industrial physical infrastructure systems. The paper also discusses the results of the project, highlighting the successful achievement of its goals. EREMI effectively supports the transition to Industry 5.0 by preparing a common European pool of future experts. Through comprehensive research and collaboration, the project team has designed curriculum that equips students with the necessary skills and knowledge to thrive in the evolving manufacturing landscape. Furthermore, the paper explores the significance of EREMI's contributions to the field, emphasizing the importance of resource efficiency and system optimization in industrial settings. By addressing the challenges posed by under-digitized infrastructure, the project aims to drive sustainable and innovative practices in manufacturing. All five project partner organisations have been actively engaged in offering relevant educational content and framework for decentralised sustainable economic development in regional and national contexts through capacity building at local level. A crucial element of the added value is the new channel for feedback from students. The survey results, which are outlined in the paper, offer valuable insights gathered from students, contributing to the continuous improvement of the project.

Coastal resources in Lian, Batangas, have undergone significant degradation due to a combination of human activities and natural factors, including sea-level rise, changes in sea-surface temperature, fluctuations in rainfall, increased storm frequency, and sedimentation. This has led to adverse effects on key ecosystems such as corals, mangroves, and seagrasses. To assess the extent of climate change hazards on these coastal resources, a Vulnerability Assessment was conducted in the municipality of Lian, Batangas. The assessment employed a combination of the Coastal Integrity Vulnerability Assessment Toolkit (CIVAT) and Integrated Coastal Sensitivity, Exposure, and Adaptive Capacity to Climate Change (ICSEA-C) guidelines. Additionally, the analysis incorporated detailed mapping using Light Detection and Ranging (LiDAR) data for mangroves and LandSat 8 imagery for corals and seagrasses. The findings at the municipal scale revealed that a staggering 90% of mangroves in Lian, Batangas, were highly vulnerable. This vulnerability was attributed to a high score in intrinsic characteristics and a low adaptive capacity. Similarly, a majority of seagrasses in the area were classified as medium and highly vulnerable at the municipal level. Only 10–20% of seagrasses received low to medium vulnerability scores. Shockingly, almost 100% of the coral reefs in Lian, Batangas, were deemed highly vulnerable, indicating a critical threat to this crucial marine ecosystem.

Background: In chronic obstructive pulmonary disease (COPD), there are two known classifications for assessing what is called disease severity. One is the Global Initiative for Chronic Obstructive Lung Disease (GOLD) classification, which is based on the post-bronchodilator value of FEV1 (% reference). The other is the STaging of Airflow obstruction by Ratio (STAR). Methods: We reanalyzed data from our outpatient cohort study, which included 141 participants with COPD from 2015 to 2023. We compared mortality and COPD-specific health status between the GOLD 1 to 4 groups and the STAR 1 to 4 groups. Results: By simple calculation, GOLD and STAR severity classes coincided in 75 participants (53.2%). The weighted Bangdiwala B value with linear weights was 0.775. The participants were observed for up to 95 months, with a median of 54 months. Death was confirmed in 29 participants (20.5%). In univariate Cox proportional hazards analyses, there was a significant difference in mortality between the GOLD 1 and GOLD 3+4 groups, with the GOLD 1 group used as the reference [Hazard Ratio 4.222 (95% CI 1.298 - 13.733), p=0.017]. However, there was no statistically significant predictive relationship between STAR 1 and STAR 2, or between STAR 1 and STAR 3+4. The St. George's Respiratory Questionnaire (SGRQ) Total and COPD Assessment Test (CAT) scores were significantly different between all GOLD groups, except for the CAT score between GOLD 1 and GOLD 2. The SGRQ Total and CAT scores were significantly different between STAR 1 and STAR 3+4, but not between STAR 1 and STAR 2. Conclusion: From the perspective of all-cause mortality and COPD-specific health status, the GOLD classification is more discriminative than STAR.

In today’s Agile and DevOps-driven software development landscape, the need for rapid and accurate bug reporting is more critical than ever. This paper presents a next-generation automation tool powered by large language models and machine learning, aimed at innovating the bug reporting process. The tool automates every phase of bug reporting, from failure detection to severity assessment, duplicate detection, and report generation. By addressing the limitations of manual bug reporting such as inconsistency, scalability challenges, and time inefficiencies, the proposed solution enhances the software testing workflow. Initial findings demonstrate significant time savings, reduced manual errors, and improved collaboration between testers and developers. This work establishes a foundation for fully automated bug reporting, poised to accelerate software development cycles while maintaining high-quality standards.

Longitudinal studies tracing high-risk samples over decades have illuminated powerful pathways of resilient adaptation among individuals who overcome adversities faced early in life. This research demonstrates resilience is a common phenomenon driven by dynamic interactions between individual traits and environmental resources that enable positive adjustment despite adversity exposure. For clinical social workers supporting clients impacted by childhood trauma, abuse, violence and other adversities, understanding these resilience processes is vital for developing strengths-based, trauma -informed interventions that enhance positive adaptation. This paper synthesizes key findings from landmark longitudinal resilience studies and explores specific practice implications for resilience-oriented clinical assessment, intervention planning, prevention efforts, and social worker training. By integrating resilience research insights, social workers can more effectively identify and cultivate clients' innate capacities for resilience, facilitating a journey towards posttraumatic growth.

Electrifying off-grid and isolated islands in the Philippines remains one of the challenges that hinders community development. One of the solutions seen to ensure energy security, expand energy access and promote a low carbon future in this isolated islands is the use of renewable energy sources. This study wishes to determine the nearshore wave energy resource during monsoon seasons in Cuyo Island using a 40-year wave hindcast and 9-year on-site wind speed data to develop high resolution wave energy model using SWAN wave model, and assessed its annual energy production through matching with wave energy devices. Results shows that average significant wave height (Hs), peak period (Tp) and wave power density (Pd) during northeast monsoon are Hs = 1.35 m, Tp = 4.79 s and Pd = 4.05 kW/m respectively, while southwest monsoon which is sheltered by the mainland resulted to a lesser outcome, Hs = 0.52 m, Tp = 3.37 s and Pd = 0.34 kW/m. While the simulated model was observed to overestimate the wave energy resource (Bias = 0.398, RMSE = 0.54 and SI = 1.34), it has a strong relationship with the observed values (average r = 0.9). Its annual energy production is highest at Station 5, with AEPWaveBouy = 43.761 MWh, AEP-Pelamis = 216.786 MWh and AEPWave Dragon = 2462.66 MWh. At present, the minimum requirement for a wave energy development to be feasible is 5 kW/m, which in this case, Cuyo Island falls short, but with the continuous evolution of wave energy converters, applications on milder re-sources will soon materialized.

Human exposure to infectious aerosols results a transmission of diseases, such as influenza, tuberculosis, and COVID-19. Most dental procedures generate a significant number of aerosolized particles, increasing transmission risk in dental settings. Since the generation of aerosols in dentistry is unavoidable, many clinics started using intervention strategies such as area-filtration units and extraoral evacuation equipment, especially under the relatively recent constraints of the pandemics. However, the effectiveness of these devices in dental operatories has not been studied. Therefore, the dental personnel's ability to position and operate such instruments efficiently is also limited. To address these challenges, we utilized a real-time sensor network for assessment of aerosol dynamics during dental restoration and cleaning producers with and without intervention. The strategies tested during the procedures were (i) local area high-efficiency particle air (HEPA) filters and (ii) extra-oral suction device (EOSD). The study was conducted at the University of Washington School of Dentistry using a network of thirteen fixed sensors positioned within the operatory and one wearable sensor worn by the dental operator. The sensor network provides time and space-resolved particulate matter (PM) data. Three-dimensional (3D) visualization informs aerosol persistence in the operatory. It was found that area filters did not improve the overall aerosol concentration in dental offices significantly. An average of 16% decrease in PM concentration was observed when EOSD equipment was used during the procedures. The combination of real-time sensors and 3D visualization can provide dental personnel and facility mangers with actionable feedback to effectively assess aerosol transmission in medical settings and develop evidence-based intervention strategies.

This study introduces a remote sensing application using satellite imagery to survey a network-scale aggregate stockpile inventory. First, a real scale aggregate quarry site was surveyed using a small Unmanned Aerial Vehicle (sUAV) to produce digital terrain models that enabled analysis of aggregate pile geometry. Second, a lab experiment was designed and performed to validate the applicability of close-range Structure from Motion (SfM) photogrammetry for measuring aggregate piles' physical properties such as volume and density. The other part of the lab experiment delved into direct measurement of aggregate density under varying compaction efforts. These experimental results, in conjunction with some simplifying assumptions, enabled the calculation of aggregate stockpile volumes and estimated weights from satellite imagery. We estimated that an inventory of 4.4 and 1.1 million metric tons of crushed aggregates and Reclaimed Asphalt Pavement (RAP), respectively, stockpiled in Washington State for asphalt production in 2017. The merit of producing such database was further showcased in an example on the economic and environmental impacts of material transportation. We approximated that hauling aggregates from quarry plants to construction sites within Washington State incurs a cost of about $50 thousand to over $4 million, consumes about 0.25 to 20 TJ of energy, and emits 20 to over 1,500 tons of CO₂-eq per asphalt plant annually.

The Internet-of-Things (IoT) triggers new types of cyber risks. Therefore, the integration of new IoT devices and services requires a self-assessment of IoT cyber security posture. By security posture this article refers to the cybersecurity strength of an organisation to predict, prevent and respond to cyberthreats. At present, there is a gap in the state-of-the-art, because there are no self-assessment methods for quantifying IoT cyber risk posture. To address this gap, an empirical analysis is performed of 12 cyber risk assessment approaches. The results and the main findings from the analysis is presented as the current and a target risk state for IoT systems, followed by conclusions and recommendations on a transformation roadmap, describing how IoT systems can achieve the target state with a new goal-oriented dependency model. By target state, we refer to the cyber security target that matches the generic security requirements of an organisation. The research paper studies and adapts four alternatives for IoT risk assessment and identifies the goal-oriented dependency modelling as a dominant approach among the risk assessment models studied. The new goal-oriented dependency model in this article enables the assessment of uncontrollable risk states in complex IoT systems and can be used for a quantitative self-assessment of IoT cyber risk posture.

This research focuses on developing a Student Performance Evaluation System to enhance effectiveness and oversight in higher education. The system aims to address challenges faced by instructors in evaluating student performance using a distributed system approach. Agile methodology is employed in development, and database replication techniques are applied for data synchronization. System features include registration, assessment form creation, assessment submission, statistical visualization, and access to assessment history. The system is designed to improve efficiency and transparency in the assessment process. Key features of the system include registration process, assessment form creation, assessment submission, statistical visualization, and access to assessment history. Its goal is to enhance efficiency and transparency throughout the assessment process. The article details the system workflow and the roles played by Admins, Instructors, and students in system usage. Additionally, it discusses the back-end development model and pathways, as well as the performance testing results. Performance testing indicates that the system achieves high throughput of up to 21.55 requests per second, with an average response time of only 34 milliseconds and an error rate of zero percent. These results affirm that the system efficiently handles user loads and nearly instantaneously responds to requests, providing an optimal user experience in the context of student performance evaluation in higher education.

Rapid post-earthquake damage diagnosis of bridges can guide decision-making for emergency response management and recovery. This can be facilitated using digital technologies to remove the barriers of manual post-event inspections. Prior mechanics-based Finite Element (FE) models can be used for post-event response simulation using the measured ground motions at nearby stations; however, the damage assessment outcomes would suffer from uncertainties in structural and soil material properties, input excitations, etc. For instrumented bridges, these uncertainties can be reduced by integrating sensory data with prior models through a model updating approach. This study presents a sequential Bayesian model updating technique, through which a linear/nonlinear FE model, including soil-structure interaction effects, and the foundation input motions are jointly identified from measured acceleration responses. The efficacy of the presented model updating technique is first examined through a numerical verification study. Then, seismic data recorded from the San Rogue Canyon Bridge in California are used for a real-world case study. Comparison between the free-field and the foundation input motions reveals valuable information regarding the soil-structure interaction effects at the bridge site. Moreover, the reasonable agreement between the recorded and estimated bridge responses shows the potentials of the presented model updating technique for real-world applications. The updated FE model is considered as the digital twin of the bridge and can be used to analyze the bridge and monitor the structural response at element, section, and fiber levels to diagnose the location and severity of any potential damage mechanism.

Earthquakes are one of the most catastrophic natural phenomena. After an earthquake, earthquake reconnaissance enables effective recovery by collecting building damage data and other impacts. This paper aims to identify state-of-the-art data sources for building damage assessment and provide guidance for more efficient data collection. We have reviewed 38 articles that indicate the sources used by different authors to collect data related to damage and post-disaster recovery progress after earthquakes between 2014 and 2021. The current data collection methods have been grouped into seven categories: fieldwork or ground surveys, omnidirectional imagery (OD), terrestrial laser scanning (TLS), remote sensing (RS), crowdsourcing platforms, social media (SM) and closed-circuit television videos (CCTV). The selection of a particular data source or collection technique for earthquake reconnaissance includes different criteria depending on what questions are to be answered by this data. We conclude that modern reconnaissance missions can not rely on a single data source and that different data sources should complement each other, validate collected data, or systematically quantify the damage. The recent increase in the number of crowdsourcing and SM platforms used to source earthquake reconnaissance data demonstrates that this is likely to become an increasingly important source of data.

Abstract: Background: This research aims to investigate the oral health status and needs of individuals with disabilities, a vulnerable population that is facing barriers in accessing and maintaining oral care. Methods: Data for this study were obtained through self-administered questionnaires distributed to individuals with disabilities who were receiving assistance from Helping Restore Ability and Neuro Assistance Foundation. The data were analyzed using statistical methods using SPSS and Microsoft Excel to identify patterns and associations related to oral health maintenance among individuals with disabilities. Results: The findings of this research indicate a high prevalence of poor oral hygiene, periodontal diseases, and untreated dental caries, risk factors of oral cancer among individuals with disabilities. Social determinants were found to have a significant influence on the oral health status of this population. The study also highlights the crucial role of caregivers in ensuring oral health maintenance. Conclusion: The results of this study underscore the urgent need for targeted interventions and improved caregiver awareness to address the oral health needs of individuals with disabilities. By addressing the disparities and barriers faced by people with disabilities in accessing dental care, we can mitigate the health, social, and economic burdens associated with poor oral health in this vulnerable population.

A two-fold integrated research study was conducted; firstly, to understand effects of copper (Cu) and zinc (Zn) on the growth and oxidative stress in Nile tilapia, Oreochromis niloticus; secondly, to study the beneficial effects of the duckweed Lemna minor L. as a heavy metal remover from wastewater. Experiments were conducted in mesocosms with and without duckweed. Tilapia fingerlings were exposed to Cu (0.004 and 0.02 mg/L) and Zn (0.5 and 1.5 mg/L) and fish fed for four weeks. We evaluated the fish growth performance, the hepatic DNA structure using comet assay, the expression of antioxidative genes (superoxide dismutase, SOD; catalase, CAT; glutathione peroxidase, GPx and glutathione-S-transferase, GST) and GPx and GST enzymatic activity. The results showed that Zn exhibited more pronounced toxic effects than Cu. Low dose of Cu did not influence the growth whereas higher doses of Cu and Zn significantly reduced the growth rate of tilapia compared to control, but addition of duckweed prevented weight loss. Further, in the presence of a high dose of Cu and Zn, DNA damage decreased, antioxidant gene expressions and enzymatic activities increased. In conclusion, results suggest that duckweed and Nile tilapia can be suitable candidates in metal remediation wastewater assessment programs.

Electrification coverage in Sarawak is the lowest at 78.74%, compared to Peninsular Malaysia at 99.62% and Sabah at 82.51%. Kapit, Sarawak with its 88.4% populations located in rural areas and mostly situated along the main riverbanks has great potential to generate electrical energy by hydrokinetic system. Yearly water velocity data is the most significant parameter to perform hydrokinetic analysis study. Nevertheless, the data retrieved from local river databases are inadequate for river energy analysis, thus hindering its progression. Instead, flow rates and rainfall data had been utilised to estimate the water velocity data. This signifies no estimation of water velocity in an unregulated river by using water level data had been made. Therefore, a novel technique of estimating the daily average water velocity data in unregulated rivers is proposed. The modelling of regression equation for water velocity estimation was performed and two regression model equations were generated to estimate both water level and water velocity on-site and proven to be valid as the coefficient of determination values had been R² = 87.4% and R²=87.9%, respectively. The combination of both regression model equations can be used to estimate long-term time series water velocity data for type-C unregulated river in remote areas.

This paper introduces the AltumView Sentinare smart activity sensor for senior care and patient monitoring. The sensor uses an AI chip and deep learning algorithms to monitor the activity of people, collect activity statistics, and notify caregivers when emergencies such as falls are detected. To protect privacy, only skeleton (stick figure) animations are transmitted instead of videos. The sensor is highly affordable, accessible, and versatile. It was a CES 2021 Innovation Award Honoree, and has been selected by Amazon as one of only three fall detection devices integrated into its Alexa Together urgent response service, and has received very positive reviews from Amazon customers. It has also been used in different senior care settings in about ten different countries. The paper presents the main features of the system, the evidences and lessons learned from its practical applications, and future directions.

This study examines the activities conducted at the archaeological site of Aptera in Crete, Greece. The research was part of the DIACHRONIC LANDSCAPES International Design Workshop, organized by the CAM (Center for Mediterranean Architecture), TUC (Technological University of Crete School of Architecture), and UNIFE (University of Ferrara Department of Architecture). This article outlines the methods used for data acquisition and processing on a territorial scale, which generated digital outputs necessary for the analysis and design phases of the workshop, as well as for further examination of the results. The collected data, obtained through low-cost aerial photogrammetric surveying and GNSS terrestrial coordinate detection, were integrated in a Structure from Motion workflow that led to the creation and exportation of various digital outputs, such as point clouds, DTM, DSM, orthophotos, and contour lines. An accuracy analysis was performed to evaluate the effectiveness and efficiency of the digital models compared to the implemented surveying strategies, including the Ground Control Point and Quality Check Point marker positioning strategy. The resulting digital models proved to be valuable assets for analysis and design within the workshop and provided insightful prospects for future research and territorial-scale projects.

For Visually impaired People (VIPs), the ability to convert text to sound can mean a new level of independence or the simple joy of a good book. With significant advances in Optical Character Recognition (OCR) in recent years, a number of reading aids are appearing on the market. These reading aids convert images captured by a camera to text which can then be read aloud. However, all of these reading aids suffer from a key issue – the user must be able to visually target the text and capture an image of sufficient quality for the OCR algorithm to function – no small task for VIPs. In this work, a Sound-Emitting Document Image Quality Assessment metric (SEDIQA) is proposed which allows the user to hear the quality of the text image and automatically captures the best image for OCR accuracy. This work also includes testing of OCR performance against image degradations, to identify the most significant contributors to accuracy reduction. The proposed No-Reference Image Quality Assessor (NR-IQA) is validated alongside established NR-IQAs and this work includes insights into the performance of these NR-IQAs on document images.

The good management of the building maintenance should be based on the regular maintenance work. Repair works are often not carried out or there are shifts in time, which causes degradation of the building. The article presents a method of planning renovation works of a MUBAR (maintenance Management in an Un-renovated Building with Abandoning Renovation) based on the consequences in case of their lack. No renovation work on individual elements in a building can cause a threat to the stability of the building structure, risking the lives of users, continuing damage to the building by damaging further elements, or even a building disaster. The method can also be applied to historic buildings. Often, due to abandonment of repairs caused most often by lack of the owner, improper manager or irresponsible users, degradation of these objects occurs. The consequences of neglected renovation of buildings lead to irreversible processes of their destruction. The aim of the article is to present the developed method of planning renovation works based on the consequences of lack of renovation works.

The building sector has a big potential to reduce the material resource demand needed for building construction and therefore, greenhouse gas (GHG) emissions. Digitalisation can help to make use of this potential and improve sustainability throughout the entire building’s life cycle. One way to address this potential is through the integration of Life-Cycle Assessment (LCA) into the building process by employing Building Information Modelling (BIM). BIM can reduce the effort needed to carry out an LCA and therefore facilitate the integration into the building process. A review of current industry practice and scientific literature shows two main approaches to address BIM-LCA integration. Either the LCA is performed in a simplified way at the beginning of the building process, or it is done at the very end when all the needed information is available, but it is too late for decision-making. One reason for this is the lack of methods, workflows and tools to implement BIM-LCA integration over the entire building process. Therefore, the main objective of this study is to develop an integrated BIM-LCA workflow implemented into a method for the whole building process using an existing structure for cost estimation. A tool is created and used in a case study in Switzerland to test the developed approach. The results of this study show that LCA can be performed continuously in each building phase over the entire building process using existing BIM modelling techniques. The main benefit of this approach is that the re-work caused by the need for re-entering data and the usage of many different software tools that characterise most of the current LCA practices is minimised. Furthermore, decision-making, both at the element and building levels, is supported.

Perhaps the greatest challenge in the graft copolymerization of acrylic acid onto starch initiated by Fenton’s is the selectivity of the grafting reaction. Low selectivity means that too much of unwanted homopolymer polyacrylic acid is produced. In this paper, it has been analyzed why with this reaction system, involving a water soluble monomer and indirect initiation, the graft selectivity is such a challenge. Several other grafting reactions, especially with monomers of low water solubility or when direct initiation is applied, show a better grafting performance. A scheme is presented based on reaction engineering principles, that supports an explanation of the observed differences. A more selective activation of starch is a factor, but perhaps even more important is a low monomer to starch ratio at the starting sites of graft reactions. Based on these insights, several methods to improve the graft selectivity are evaluated, with the help of literature data but mostly by experimental explorations in our laboratory. Most promising appears to be a dedicated dosage method, to add monomer in portions over time, tested in a batch reactor with gelatinized cassava starch. This way, both grafting percentage and graft selectivity could be improved. Such could not be realized with the more conventional dosage, which is to add all monomer before the start of the reaction. This can be considered a principal breaktrough. Still, more research and development would be needed to refine the method and to implement the idea also in a continuous reactor at larger scale.