Fixed offshore wind turbines continue to be developed for high latitude areas where not only wind and wave loads need to be considered, but also moving sea ice. Current rules and regulations for the design of fixed offshore structures in ice-covered waters do not adequately consider effects of ice loading and its stochastic nature on fatigue life of the structure. Ice crushing on such structures results in ice-induced vibrations, which can be represented by loading the structure using a variable-amplitude loading (VAL) sequence. Typical offshore load spectra are developed for wave and wind loading. Thus, a combined VAL spectrum is developed for wind, wave, and ice action. To this goal, numerical models are used to simulate the dynamic ice-, wind-, and wave-structure interaction. The stress time-history at an exemplarily selected critical point in an offshore wind energy monopile support structure is extracted from the model and translated into a VAL sequence, which can then be used as a loading sequence for the fatigue assessment or fatigue testing of welded joints of offshore wind turbine support structures. This study presents the approach to determine combined load spectra and standardized time series for wind, wave, and ice action.

This paper presents an approach to the Euler-Bernoulli beam theory (EBBT) using the finite difference method (FDM). The EBBT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally, the finite difference approximations are derived based on fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection curve; the FOPH is made for the fourth and third derivative of the deflection curve while the SOPH is made for its second and first derivative. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. In this paper, the FOPH was made for all of the derivatives of the deflection curve, and additional points were introduced at the beam’s ends and positions of discontinuity (concentrated loads or moments, supports, hinges, springs, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends and to satisfy the boundary and continuity conditions. Moreover, grid points with variable spacing were also considered, the grid being uniform within beam segments. First-order analysis, second-order analysis, and vibration analysis of structures were conducted with this model. Furthermore, tapered beams were analyzed (element stiffness matrix, second-order analysis). Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. The results obtained in this paper showed good agreement with those of other studies, and the accuracy was increased through a grid refinement. Especially in the first-order analysis of uniform beams, the results were exact for uniformly distributed and concentrated loads regardless of the grid. Further research will be needed to investigate polynomial refinements (higher-order polynomials such as fifth-order, sixth-order…) of the deflection curve; the polynomial refinements aimed to increase the accuracy, whereby non-centered finite difference approximations at beam’s ends and positions of discontinuity would be used.

Information can be considered as the most fundamental, philosophical, physical and mathematical concept originating from the totality by means of physical and mathematical transcendentalism (the counterpart of philosophical transcendentalism). Classical and quantum information, particularly by their units, bit and qubit, correspond and unify the finite and infinite. As classical information is relevant to finite series and sets, as quantum information, to infinite ones. A fundamental joint relativity of the finite and infinite, of the external and internal is to be investigated. The corresponding invariance is able to define physical action and its quantity only on the basis of information and especially: on the relativity of classical and quantum information. The concept of transcendental time, an epoché in relation to the direction of time arrow can be defined. Its correlate is that information invariant to the finite and infinite, therefore unifying both classical and quantum information.

The verticals of 5G, such as the automotive, smart grid and smart cities sectors, will bring lots of new sensors and IoT devices requiring Internet connectivity. Most of these machine-type terminals will be sparsely distributed, covering a very large geographical area and, from time to time, will have to update their software, firmware and/or other relevant data. Given this situation, one viable solution to implement the “Over-the-Air” update of these IoT terminals can be with the aid of GEO satellite systems. However, due to the ultra-dense radio frequency reuse that contemporary High-Throughput Satellite (HTS) systems implement in the access link to serve the IoT terminals, the use of a time-packed Free Space Optical (FSO) link represents a practical solution to avoid the bottleneck that the satellite gateway experiences in the feeder link. The performance of both Detect-and-Forward and Decode-and-Forward relaying strategies are studied, assuming that the single-carrier M-PAM symbols that are transmitted on the optical feeder link are mapped into M-QAM symbols that modulate the multiple subcarriers of the OFDM-based radio access link. In addition, the benefits of encapsulating the NB-IoT frames into DVB-S2(X) satellite frames is also analyzed in detail. The effects of the impairments introduced in both optical feeder and radio access links are characterized in detail, and the end-to-end error correction capabilities of the Modulation and Coding Schemes (MCS) defined in the contemporary releases of the NB-IoT and DVB-S2(X) standards are studied for different working regimes.

To minimise environmental impact, avoid regulatory penalties, and improve competitiveness, energy-intensive manufacturing firms require accurate forecasts of their energy consumption so that precautionary and mitigation measures can be taken. Deep learning is widely touted as a superior analytical technique to traditional artificial neural networks, machine learning, and other classical time series models due to its high dimensionality and problem solving capabilities. Despite this, research on its application in demand-side energy forecasting is limited. We compare two benchmarks (Autoregressive Integrated Moving Average (ARIMA), and an existing manual technique used at the case site) against three deep learning models (simple Recurrent Neural Networks (RNN), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU)) and three machine learning models (Support Vector Regression (SVM), Random Forest, and K-Nearest Neighbors (KNN)) for short term load forecasting (STLF) using data from a Brazilian thermoplastic resin manufacturing plant. We use the grid search method to identify the best configurations for each model, and then use Diebold-Mariano testing to confirm the results. Results suggests that the legacy approach used at the case site is the worst performing, and that the GRU model outperformed all other models tested.

An event occurring within a stationary environment, in the direction toward which an observer self-rotates, is perceived to precede a simultaneous event, in the direction away from which she moves. When self-rotation results from angular acceleration in the dark, perception of space is also distorted, such that the subjective straight-ahead shifts in the opposite direction to motion and temporal event promotion. A reference frameshift theory, based on the special theory of relativity, is proposed to explain these findings. Here, a hyperbolic tangent transformation of objective angular velocity constrains subjective self-rotation velocity within finite bounds, consistent with it being a limited perceptual resource. Identifying this subjective variable with vestibular nystagmus slow-phase angular velocity, the asymptotic perceived self-rotation velocity is estimated at ~200 °⁄s. When included in the Lorentz transformations of the new formalism, this value predicts experimental simultaneity distortion. Hypothetically, the hyperbolic tangent objective-to-subjective transfer function would maximize the differential entropy of the percept, and thereby also the stimulus/percept mutual information, if angular velocities of body rotation encountered in naturalistic environmental interaction have a logistic probability density distribution of scale 100 °⁄s, a proposed experimental test of the scheme.

Solving maximum matching problems in bipartite graphs is critical in fields such as computational biology and social network analysis. This study introduces HybridGNN, a novel graph neural network model designed to efficiently address complex matching problems at scale. HybridGNN combines the capabilities of Graph Attention Networks (GAT), GATv2, and Graph SAGE (SAGEConv) layers, integrating techniques like mixed precision training, gradient accumulation, and Jumping Knowledge networks to enhance computational efficiency and performance. Additionally, the incorporation of Graph Isomorphism Networks (GIN) enhances the model's ability to discriminate between structurally different graphs. A time complexity analysis shows that HybridGNN achieves efficient computation across different layers. When evaluated on an email communication dataset, HybridGNN outperformed traditional algorithms such as Hopcroft-Karp, particularly on large and complex graphs. These results demonstrate that HybridGNN offers a powerful and efficient approach for solving maximum matching problems in bipartite graphs, with potential applications in various fields requiring analysis of large-scale and complex graph data.

Background: Over the past few years there has been immense evolution in various areas particularly in the areas of digital technologies wherein the pace of change is very high. Industrial areas such as operations and supply chain management together with advanced technologies such as machine learning, big data analytics, artificial intelligence, as well as the Internet of Things, create completely different forms of operational models for various industries. In the area of healthcare too, these emerging computational sophistication is introduced to revolutionise the approaches to prevent, diagnose and treat diverse diseases and illnesses. Objective: The objective of this study is to provide an extensive review of the contemporary approaches utilizing data to cope with significant mental disorders. From over 60 relevant scholarly articles published between 2011 and 2023, it discusses how tools such as predictive modelling, social media analysis, data from smartphones, and chatbots help with issues such as early detection, telemonitoring, provision of psychological support, and individualised prevention. Method: An initial literature review to analyse over 60 research articles, which include empirical studies that were conducted between 2011 and 2023. The research assessed implemented novel digital approaches to mental health interventions including big data analytics for predicting condition status, machine learning for examining social media content, behaviour monitoring through smartphone sensors, and using conversational agents or chatbots. The following is an overview of general conclusions from experimental and descriptive secondary research studies published in professional outlets concerning possible advantages and disadvantages of data science applied to important concerns in mental health. Results: Research reveals that integrating subtle e-health tools in tandem with typical treatment approaches holds the potential to expand mental health services to more or less integrate them into clients’ day-to-day lives, and practically individualize effective treatments accordingly. Technological solutions for instance allow remote risk assessment, symptom monitoring and determination of treatment compliance. New lines of virtualized paradigm solve social challenges that interfere with the conventional provision and consumption of care. However, questions of privacy and the long-term effects as well as clinical adoption are yet to be solved in a analytically distinct manner.

Globalization and industrialization have significantly disturbed the environmental ecosystem, leading to critical challenges such as global warming, extreme weather events, and water scarcity. Forecasting temperature trends is crucial for enhancing the resilience and quality of life in smart sustainable cities, enabling informed decision-making and proactive urban planning. This research specifically targets Ahmedabad city in India and employs the Seasonal Auto Regressive Integrated Moving Average with eXogenous factors (SARIMAX) model to forecast temperatures over a ten-year horizon using two decades of real-time temperature data. The stationarity of the dataset was confirmed using the Augmented Dickey-Fuller test, and the Akaike Information Criterion (AIC) method helped identify the optimal seasonal parameters of the model, ensuring a balance between fidelity and predictive accuracy. The model achieved an RMSE of 1.0265, indicating high accuracy within the typical range for urban temperature forecasting. This robust measure of error underscores the model’s precision in predicting temperature deviations, which is particularly relevant for urban planning and environmental management. The findings provide city planners and policymakers with valuable insights and tools for preempting adverse environmental impacts, marking a significant step towards operational efficiency and enhanced governance in future smart urban ecosystems. Future work may extend the model's applicability to broader geographical areas and incorporate additional environmental variables to refine predictive accuracy further.

This study proposes a methodology for identifying time intervals in which time-of-use (ToU) energy tariffs can be set. This is achieved by analyzing the variability in electric power demand and esti-mating the potential for demand flexibility. The proposed methodology is as follows: first, data preprocessing is performed, focusing on the organization and cleaning of individual consumption records. Subsequently, the data are processed and classified by using consumption variability analysis and clustering techniques. Then, representative clusters are selected and time intervals are analyzed to identify periods of high electric power consumption variability. This methodology was tested with real data from smart meters in the Colombian electrical system, in which time intervals with potential for settinh ToU tariffs were ultimately identified. This work promotes the implementation of demand response strategies that enhance sustainability and facilitate the transition to a more resilient energy landscape both nationally and internationally. The findings are expected to contribute to the formulation of tariff schemes that encourage con-scious changes in electric energy consumption patterns.

A groundbreaking integrated predictive model, termed Cyber Forensics Behavioral Analysis (CFBA), has been developed in an environment characterized by rapidly evolving and increasingly sophisticated cyber threats. This model merges Cyber Behavioral Sciences with Digital Forensics to enhance the prediction accuracy and effectiveness of cyber threats originating from specific Autonomous System Numbers (ASNs). It has been observed that traditional cybersecurity strategies, predominantly focused on technical aspects, must be improved in addressing the complex landscape of cyber threats. Consequently, a novel approach has been proposed in this research, combining technical expertise with insights into the behavior of cybercriminals, thereby addressing a significant gap in existing methodologies. A mixed-methods approach has been employed in the study, integrating quantitative and qualitative research methods. This approach has created a comprehensive framework incorporating digital forensics, cybersecurity, computer science, forensic psychology, and the cyber behavioral sciences which incorporates disciplines scuch as cyberpsychology and forensic cyberpsychology. The study is anchored around four key concepts: (1) Forensic Cyberpsychology, which focuses on understanding psychological aspects of cybercriminal behavior; (2) Digital Forensics, involving the collection and analysis of digital evidence from cyber incidents; (3) Predictive Modeling, which utilizes historical data and patterns to anticipate potential cyber threats; and (4) the Cyber Behavioral Analysis Metric (CBAM) and Cyber Behavioral Score (CBS), tools designed for evaluating and scoring ASNs based on their behavior in terms of cybersecurity threat risks. Challenges encountered in the development of this integration have been significant. Initial setbacks included the misalignment of traditional cyber defense methods with the evolving nature of cyber threats and the absence of a holistic approach in pre-existing models. Through the narrative of these challenges and the subsequent development of the CFBA model, the research highlights the necessity for an interdisciplinary approach to cybersecurity. The outcomes of this study are not merely theoretical but provide practical, actionable tools and frameworks that markedly improve the precision of predicting cyber threats, especially from ASNs. The CFBA model represents a significant shift in cybersecurity strategies, highlighting the importance of integrating behavioral insights with technical knowledge. The study emphasizes the need for ongoing research and collaboration in cybersecurity, advocating for an approach that is as comprehensive and multifaceted as the cyber threats it seeks to mitigate. This research has been conducted to contribute significantly to cybersecurity, offering new perspectives and methodologies in a rapidly changing domain.

The combination of interstitial hyperthermia treatment (IHT) with high dose rate brachytherapy (HDR-BT) for prostate cancer treatment and has the potential to improve clinical outcome, since it highly enhances the efficiency of cell kill, especially when applied simultaneously. Therefore, we have developed the ThermoBrachy applicators. To effectively apply optimal targeted IHT, treatment planning is considered essential. However, treatment planning in IHT is rarely applied since it is regarded difficult to accurately calculate the deposited energy in the tissue in a short enough time for clinical practice. In this study, we investigated various time-efficient methods for fast computation of the electromagnetic (EM) energy deposition resulting from the ThermoBrachy applicators. Initially, we investigated the use of an electro-quasistatic solver. Next, we extended our investigation to the application of geometric simplifications. Furthermore, we investigated the validity of the superpositioning principle, which can enable adaptive treatment plan optimization without the need for continuous recomputation of the EM field. Finally, we evaluated the accuracy of the methods by comparing them to the golden standard Finite-Difference Time-Domain calculation method using gamma-index analysis. The simplifications considerably reduced the computation time needed, improving from >12 h to a few seconds. All investigated methods showed excellent agreement with the golden standard by showing a >99% passing rate with 1%/0.5 mm Dose Difference and Distance-to-Agreement criteria. These results allow the proposed electromagnetic simulation method to be used for fast and accurate adaptive treatment planning.

This paper presents an approach to the Kirchhoff-Love plate theory (KLPT) using the finite difference method (FDM). The KLPT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally in the case of KLPT, the finite difference approximations are derived based on the fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection surface. The FOPH is made for the fourth and third derivative of the deflection surface while the SOPH is made for its second and first derivative; this leads to a 13-point stencil for the governing equation. In addition, the boundary conditions and not the governing equations are applied at the plate edges. In this paper, the FOPH was made for all of the derivatives of the deflection surface; this led to a 25-point stencil for the governing equation. Furthermore, additional nodes were introduced at plate edges and at positions of discontinuity (continuous supports/hinges, incorporated beams, stiffeners, brutal change of stiffness, etc.), the number of additional nodes corresponding to the number of boundary conditions at the node of interest. The introduction of additional nodes allowed us to apply the governing equations at the plate edges and to satisfy the boundary and continuity conditions. First-order analysis, second-order analysis, buckling analysis, and vibration analysis of plates were conducted with this model. Moreover, plates of varying thickness and plates with stiffeners were analyzed. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. In first-order, second-order, buckling, and vibration analyses of rectangular plates, the results obtained in this paper were in good agreement with those of well-established methods, and the accuracy was increased through a grid refinement.

We study the effect of the generation of the mechanical transverse wave (MTW)　travelling in the opposite direction (OD) to a moving medium (MM) on the relativistic energy conservation law (RECL). From the viewpoint of the relativity of simultaneity (RS), the time on the coordinate coinciding with the advance end of the wave (AEW) travelling toward the rear of the MM passes faster than that on the coordinate coinciding with the wave source (WS). Then the AEW in the MM travels forward compared to that in the rest frame of reference (RFR) which is stationary relative to the medium when the time on the coordinate coinciding with the WS is same for each inertial frame of reference (IFR). Hence, the coordinate interval (CI) between the AEW and WS in the MM is observed to be larger than that between them in the RFR. We show that this difference holds true for the CI of any portion having transverse velocities mutually converted by the Lorentz transformation (LT). This difference in the CI leads to that in the rest mass (RM). We demonstrate that the RM included in wave motion (WM) in the MM is larger than one included in WM in the RFR when comparing the portions having transverse velocities mutually converted by the LT. This relation holds true for all portions in WM. Therefore, the total coordinate interval of the portion (CIP) and total RM (TRM) included in WM in the MM (WMMM) are large compared to them included in WM in the RFR. Furthermore, we compare the relativistic kinetic energy (RKE) of the MTW travelling in the OD to the MM (ODMM) with that of the MTW propagating in the direction vertical to the moving direction of the medium. We prove that the CIP and RM included in the former MTW are larger than them included in the latter MTW when comparing each portion with the same transverse velocity (TV). Moreover, the total CIP and TRM included in the former MTW are also large compared to them included in the latter MTW. The reason for these is that the latter CIP and RM are equal to them in the RFR when comparing the portions having transverse velocities mutually converted by the LT. On the other hand, the energy supplied to generate each MTW is the same. From these, we demonstrate that the RKE of the MTW travelling in the ODMM can be larger than the total relativistic energy (TRE) of the MTW propagating in the direction vertical to the moving direction of the medium. Consequently, we propose a violation of the RECL and Einstein’s principle of relativity (EPR) because the TRE is not necessarily conserved in the IFR in which the medium is moving.

Abstract: Nonlinear spectrum distortions are caused by the peculiarities of the operation of charge-coupled device elements (CCD), in which the signal exposition time (TINT) is one of the significant parameters. A change of TINT on a CCD leads to a nonlinear distortion of the resulting spectrum. Nonlinear distortion of the spectrum, in its turn, leads to errors in determining the central wavelength of Fiber Bragg Gratings (FBG) and spectrally sensitive sensors, which, in general, negatively affects the accuracy of measuring systems. The paper proposes an algorithm for correcting nonlinear distortions of the spectrum obtained on a spectrum analyzer using CCD as a receiver. It is shown that preliminary calibration of the optical spectrum analyzer with subsequent mathematical processing of the signal makes it possible to make corrections in the resulting spectrum, thereby leveling the errors caused by measurements at different TINT.

In this study, we explored the manipulation of optical properties in the terahertz (THz) frequency band of radio-frequency (RF) sputtered indium-tin-oxide (ITO) thin-films on highly resistive silicon substrate by rapid thermal annealing (RTA). The optical constants of as-deposited and RTA-processed ITO films annealed at 400°C, 600°C and 800°C are determined in the frequency range of 0.2 to 1.0 THz. The transmittance can be changed from ~ 27% for as-deposited to ~ 10% and ~ 39% for ITO films heat-treated at different annealing temperatures, T_a’s. Such variations of optical properties in the far infrared for the samples under study are correlated with their mobility and carrier concentration, which are extracted from Drude-Smith modeling of THz conductivity with plasma frequency, scattering time and the c-parameters as fitting parameters. Resistivities of the films are in the range of 10^-3 to 10^-4 W-cm, confirming that annealed ITO films can potentially be used as transparent conducting electrodes for photonic devices operating at THz frequencies. The highest mobility, m = 47 cm²/V∙s, with carrier concentration, N_c = 1.31´10²¹ cm^-3, was observed for ITO films annealed at T_a = 600°C. The scattering times of the samples were in the range of 8 – 21 fs, with c-values of -0.63 to -0.87, indicating strong back scattering of the carriers, mainly by grain boundaries in the polycrystalline film. To better understand the nature of these films, we have also characterized the surface morphology, microscopic structural properties and chemical composition of as-deposited and RTA-processed ITO thin-films. For comparison, we have summarized the optical properties of ITO films sputtered on fused silica substrates, as-deposited and RTA-annealed, in the visible transparency window of 400-800nm. The optical bandgaps of the ITO thin films were evaluated with a Tauc plot from the absorption spectra.

Experiments to measure a single molecule/particle, i.e. an individual molecule/particle, at room temperature or under physiological conditions without immobilization, for example on a surface, or without significant hydrodynamic flow have so far failed. This failure has given impetus to the underlying theory of Brownian molecular motion towards its stochastics due to diffusion. Quantifying the thermodynamic jitter of molecules/particles inspires many and forms the theoretical basis of single-molecule/single-particle biophysics and biochemistry. For the first time, our simulation results for a live cell (cytoplasm) show that the tracks of individual single molecules are localized in Brownian motion, while there is fanning out in fractal diffusion (anomalous diffusion).

The next-generation communication systems demand integration of sensing, communication, and power transfer (PT) capabilities, requiring high spectral efficiency, energy efficiency, and low cost, while also necessitating robustness in high-speed scenarios. Integrated sensing and communication systems (ISACS) exhibit the ability to simultaneously perform communication and sensing tasks using a single RF signal, while simultaneous wireless information and power transfer (SWIPT) systems can handle simultaneous information and energy transmission, and orthogonal time frequency space (OTFS) signals are adept at handling high Doppler scenarios. Combining the advantages of these three technologies, a novel cyclic prefix (CP) OTFS based integrated simultaneous wireless sensing, communication, and power transfer system (ISWSCPTS) framework is proposed in this work. Within the ISWSCPTS, the CP-OTFS matched filter (MF) based target detection and parameters estimation (MF-TDaPE) algorithm is proposed to endow the system with sensing capabilities. To enhance the system’s sensing capability, a waveform design algorithm based on CP-OTFS ambiguity function shaping (AFS) is proposed, which is solved by iteratively method. Furthermore, to maximize the system’s sensing performance under communication and PT Quality of Service (QoS) constraints, a semidefinite relaxation (SDR) beamforming design (SDR-BD) algorithm is proposed, solved using through SDR technique. Simulation results demonstrate that the ISWSCPTS exhibits stronger parameter estimation performance in high-speed scenarios compared to orthogonal frequency division multiplexing (OFDM), waveform designed by CP-OTFS AFS demonstrates superior interference resilience, and beamforming designed by SDR-BD strikes a balance in the overall performance of the ISWSCPTS.

Supermarkets in Port Harcourt (PH) city, Nigeria, predominantly rely on diesel electricity generation due to grid instability, leading to high cost of electricity prices. Although solar photovoltaic (PV) systems have been proposed as an alternative, these supermarkets have yet to adopt them, mainly due to high investment costs and a lack of awareness of the long-term financial and environmental benefits. This paper examines the technical and economic practicality of a PV system for these supermarkets using the PVsyst software and a spreadsheet model. Solar resources showed that PH has a daily average solar radiation and temperature of 4.21 kWh/m2/day and 25.73℃, respectively. Market Square, the supermarket with the highest peak power demand of 59.8 kW, and a 561 kWh/day load profile, was chosen as a case study. A proposed PV system with a power capacity of 232 kW, battery storage capacity of 34,021 Ah, a charge controller size of 100 A/560V, and an inverter with a power rating of 60V/75 kW has been designed to meet the load demand. The economic analysis showed a $266,936 life cycle cost, $0.12 per kWh levelized cost of electricity (LCOE), 4-year simple payback time, and a 20.5% internal rate of return (IRR). The PV system is feasible due to its positive net present value (NPV) of $165,322 and carbon savings of 582 tCO2/year.

Chronoamperometric curves of the oxidation of a ferrocenyl derivative by the potential step showed diffusion controlled-like currents less than the Cottrell's equation at a platinum wire electrode. The lower deviation cannot be explained by the Butler-Volmer heterogeneous kinetics, but was ascribed to the negatively capacitive current associated with the redox reaction. The deviation at the fully oxidized potential corresponds to the non-zero concentration at the electrode surface, which cannot be predicted from the Nernst equation. The Nernst equation expresses the relationship of the potential with the activity at the electrode surface rather than the concentration. The diffusion equation provides the relation of the current with the surface concentration rather than the activity. The negative capacitance or the non-zero concentration may arise from structure formation on the electrode owing to the dipole-dipole interaction, which is similar to the generation of the double layer capacitance including frequency dispersion. On this concept, we derive here expressions for the lowered diffusion-controlled current and the time-dependent surface concentration. The negatively capacitive current shows the time-dependence of t-0.9, which is similar to the decay of the double layer capacitive currents. The surface concentration decays with the t-0.4-dependence.

Patients with locally advanced head and neck squamous cell carcinoma (HNSCC) frequently require primary radiochemotherapy (RCT). Despite intensity-modulation, desired radiation-induced effects observed in HNSCC, may also be observed as side-effects in healthy tissue e.g. the sternocleidomastoideus muscle (SCM). These side-effects (e.g. tissue fibrosis) depend on the interval between completion of RCT and restaging-CT. For salvage surgery, the optimal time window for surgery is currently postulated between 6 and 12 weeks after completion of RCT. Thus, no extensive tissue fibrosis is to be expected. This interval is based on studies exploring surgical complications. Studies directly exploring radiation-induced changes of the SCM in HNSCC-patients are sparse. The present study quantifies tissue alterations in SCM and paravertebral musculature (PVM) after RCT applying radiomics to determine the optimal time window for salvage surgery. Three radiomic key parameters 1) volume, 2) mean positivity of pixels (MPP) and 3) uniformity were extracted with mint lesionTM in the staging-CTs and restaging-CTs of 98 HNSCC-patients. Of these, 25 were female, the mean age was 62 (±9.6) years and 80.9% were UICC Stage IV. The mean restaging-interval was 55 (±28; range29-229) days. Only the mean volume significantly decreased after RCT from 9.0 to 8.4 and 96.5 to 91.9 ml for SCM and PVM, respectively (both p=0.007, both Cohen’s d=0.28). In addition, the mean body mass index (BMI) decreases from 23.9 (±4.2) to 21.0 (±3.6) kg/m² (p<0.001); Cohen's d = 0.9). The mean BMI-decrease significantly correlated with the volume decrease for SCM (r=0.27; p=0.007) and PVM (r=0.41; p<0.001). If t-test p-values were adjusted for the BMI-decrease, no significant change in volumes for SCM and PVM was observed (both p>0.05). The present data supports the postulated optimal interval for salvage surgery of 6 to 12 weeks. Irrespective of the remaining risk-benefit ratio of salvage surgery, the risk of additional surgical complications due to fibrosis is not supported by the present observations.

As renewable energy generation prediction system has been introduced into the energy trading market, making a model to accurately predict the quantity of solar photovoltaic (PV) energy generation has become a significant problem. Moreover, to encourage an accurate prediction of the quantity of energy generation, an incentive system has been implemented for those who predict the quantity of solar PV energy under the error rate of 8%. Therefore, it has become more important to investigate and analyze current prediction technology numerically and develop more advanced prediction system. In this study, we tried to develop a better model to improve the accuracy of solar PV energy generation quantity by comparing three models made with gradient boosting machine (GBM), Model 1, Model 2, Model 3 respectively. Model 1 was built with the whole training data set without any additional preprocessing. After conducting some additional preprocessing procedure to predict solar energy generation more accurately, we made Model 2 with the whole training data set and Model 3 with only upper 10% of energy generation capacity. To compare the accuracy of three models, normalized mean absolute error (nMAE) was used as an evaluation index. The nMAE of Model 1 was 9.64% while the Model 2 showed 8.41%. Also, Model 3, which was constructed with the training set of upper 10% energy generation capacity, outperformed with the nMAE of 8.08%. For further study, to check the effectiveness of models constructed with GBM, a time series model, autoregressive integrated moving average (ARIMA), was also built and the nMAE was compared.

L\'evy walks represent important modeling tools for variety of real life processes. Their natural scaling limits are known to be described by the so-called material fractional derivatives. So far these scaling limits were derived for spatially homogeneous walks, where Fourier and Laplace transforms represent natural tools of analysis. Here we derive the corresponding limiting equations in the case of position depending times and velocities of walks, where Fourier transforms cannot be effectively applied. In fact, we derive three different limits (specified by the way the process is stopped at an attempt to cross the boundary), leading to three different multi-dimensional versions of Caputo-Dzherbashian derivatives, which correspond to different boundary conditions for the generators of the related Feller semigroups and processes. Some other extensions and generalisations are analysed.

This work is devoted to consideration and analysis of the application of molecular dynamics simulation (MDS) methods to the study of nanosized polymer polyvinylidene fluoride (PVDF) thin ferroelectric films (two-dimensional ferroelectrics) and their composites with graphene layers: 1) to study and calculations of the polarization switching time depending on the electric field and PVDF film thickness; 2) to study and calculations of the polarization switching time depending changes of the PVDF on PVDF-TrFE film; 3) to study the polarization switching time in PVDF under influence of graphene layers. All calculations at each MDS step were carried out using quantum semi-empirical methods PM3. A comparison and analysis of the results of these calculations and the kinetics of polarization switching within the framework of the Landau-Ginzburg-Devonshire theory for homogeneous switching in ferroelectric polymer films is carried out. The study of the composite heterostructures of the “graphene-PVDF” type and calculations of their polarization switching times were presented too. It is shown that replacing PVDF with PVDF-TrFE significantly changes the polarization switching times in these thin polymer films, and that introducing various graphene layers into the PVDF layered structure leads to both an increase and a decrease in the polarization switching time. Here everything also depends on the position and displacement of the ferroelectric coercive field depending on the system damping parameters.

The use of Artificial Neural Networks (ANN) is a great contribution to medical studies since the application of forecasting concepts allows the analysis of future diseases propagations. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were proposed two methodologies to predict 28 days ahead the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, United Kingdom, and Germany, and a case study of the results of massive immunization in Israel. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries size, and the cumulative vaccination values by the percentage of population immunized, at least with one dose of vaccine. As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology and targets other possibilities of use for the proposed method. The best architecture achieved a general MAE for the 1 to 28 days ahead forecast lower than 30 cases, 0,6 deaths and 2,5 ICU patients by million people.

The use of Light Amplification by Stimulated Emission of Radiation (i.e., LASERs or lasers) by the U.S. Department of Defense is not new and includes laser weapons guidance, laser-aided measurements, even lasers as weapons (e.g., Airborne Laser). Lasers in support of telecommunications is also not new. The use of laser light in fiber optics shattered thoughts on communications bandwidth and throughput. Even the use of lasers in space is no longer new. Lasers are being used for satellite-to-satellite crosslinking. Laser communication can transmit orders-of-magnitude more data using orders-of-magnitude less power and can do so with minimal risk of exposure to the sending and receiving terminals. What is new is using lasers as the uplink and downlink between the terrestrial segment and the space segment of satellite systems. More so, the use of lasers to transmit and receive data between moving terrestrial segments (e.g., ships at sea, airplanes in flight) and geosynchronous satellites is burgeoning. This manuscript examines the technological maturation of employing lasers as the signal carrier for satellite communications linking terrestrial and space systems. The purpose of the manuscript is to develop key performance parameters (KPPs) to inform U.S. Department of Defense initial capabilities documents (ICDs) for near-future satellite acquisition and development. By appreciating the history and technological challenges of employing lasers rather than traditional radio frequency sources for satellite uplink and downlink signal carrier, this manuscript recommends ways for the U.S. Department of Defense to employ lasers to transmit and receive high bandwidth, large-throughput data from moving platforms that need to retain low probabilities of detection, intercept, and exploitation (e.g., carrier battle group transiting to a hostile area of operations, unmanned aerial vehicle collecting over adversary areas). The manuscript also intends to identify commercial sector early-adopter fields and those fields likely to adapt to laser employment for transmission and receipt.

Fatty acids (FAs) represent an important class of metabolites, impacting on membrane building blocks and cellular regulatory networks. In nature, prokaryotes are characterized with the most impressing FA structural diversity and the highest relative contents of free fatty acids (FFAs). Thereby, nitrogen-fixing bacteria (order Rhizobiales), often found in symbiosis with legumes, attract a special interest. Indeed, FAs impact on the structure of rhizobial nodulation factors, required for successful infection of plant root. Although the FA patterns can be addressed by GC- and LC-MS, these methods are time-consuming and suffer from compromised sensitivity, low stability of derivatives and artifacts. In contrast, MALDI-TOF-MS represents an excellent platform for high-efficient metabolite fingerprinting, also applicable to FFAs. Therefore, here we propose a simple and straightforward protocol for high-throughput relative quantification of FFAs in rhizobia by the combination of Langmuir technology and MALDI-TOF-MS, which is featured with high sensitivity, accuracy and precision of quantification. Here we propose a step by step procedure comprising rhizobia culturing, pre-cleaning, extraction, sample preparation, mass spectrometric analysis, data processing and post-processing. To demonstrate the analytical potential of the protocol we illustrate it by a case study – comparison the FFA metabolomes of two rhizobia species - Rhizobium leguminosarum and Sinorhizobium meliloti.

Dirac's Large Number Hypothesis (LNH), proposed in 1937, has captivated the scientific community with its exploration of profound correlations between cosmic and atomic scales. This hypothesis delves into the intricate interplay between the infinitesimally small and the vastly large, offering potential insights into the fundamental nature of the universe. As we continue to uncover the mysteries of the cosmos, the LNH oscillates on the precipice of scientific acceptance—neither fully validated nor entirely dismissed. In this review paper, we embark on a comprehensive journey through Dirac's LNH, shedding light on its theoretical underpinnings, its implications for universe models, and its resonance with the Anthropic Principle. We delve into the possibilities of variable gravitational constants and continuous mass creation, inviting further exploration into the intricacies of our cosmic symphony. By embracing the ongoing quest for understanding, we endeavor to unravel the profound harmonies that connect the infinitesimal with the infinite, contributing to the symphony of knowledge in theoretical physics and cosmology.

Addressing non-unions involves stabilizing the affected area through osteosynthesis and improving bone biology using bone grafts. However, there is no consensus on the optimal treatment method. This study aims to compare outcomes of non-union revision using conventional treatment methods (metal hardware ± graft) versus osteosynthesis with the human, allogeneic cortical bone screw (Shark Screw®). Thirty-four patients underwent conventional treatment, while 28 cases received Shark Screws®. Patient demographics, bone healing, time to bone healing, and complications were assessed. Results revealed a healing rate of 96.4% for the Shark Screw® group, compared to 82.3% for the conventionally treated group. The Shark Screw® group exhibited a tendency for faster bone healing (9.4±3.2 vs. 12.9±8.5 weeks, p=0.05061). Hardware irritations led to six metal removals in the conventional group versus two in the Shark Screw® group. The Shark Screw® emerges as a promising option for personalized non-union treatment in the foot, ankle, and select lower leg cases, facilitating effective osteosynthesis and grafting within a single construct, promoting high union rates, low complications, and a rapid healing process.

Commercial buildings are a significant consumer of energy worldwide. Logistics facilities, and specifically warehouses, are a common building type yet under-researched in the demand-side energy forecasting literature. Warehouses have an idiosyncratic profile when compared to other commercial and industrial buildings with a significant reliance on a small number of energy systems. As such, warehouse owners and operators are increasingly entering in to energy performance contracts with energy service companies (ESCOs) to minimise environmental impact, reduce costs, and improve competitiveness. ESCOs and warehouse owners and operators require accurate forecasts of their energy consumption so that precautionary and mitigation measures can be taken. This paper explores the performance of three machine learning models (Support Vector Regression (SVR), Random Forest, and Extreme Gradient Boosting (XGBoost)), three deep learning models (Recurrent Neural Networks (RNN), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU)), and a classical time series model, Autoregressive Integrated Moving Average (ARIMA) for predicting daily energy consumption. The dataset comprises 8,040 records generated over an 11-month period from January to November 2020 from a non-refrigerated logistics facility located in Ireland. The grid search method was used to identify the best configurations for each model. The proposed XGBoost models outperform other models for both very short load forecasting (VSTLF) and short term load forecasting (STLF); the ARIMA model performed the worst.

We propose a new theory beyond the standard model of elementary-particle physics. Employing the concept of a quantized spacetime, our theory demonstrates that the zero-point energy of the vacuum alone is sufficient to create all the fields, including gravity, the static electromagnetic field, and the weak and strong interactions. No serious undetermined parameters are assumed. Furthermore, the relations between the forces at the quantum-mechanics level is made clear. Using these relations, we quantize Einstein’s gravitational equation and explain the Dark Energy in our universe. Beginning with the zero-point energy of the vacuum, and after quantizing Newtonian gravity, we combine the energies of a static electromagnetic field and gravity in a quantum spacetime. Applying these results to the Einstein gravity equation, we substitute the energy density derived from the zero-point energy in addition to redefining differentials in a quantized spacetime. We thus derive the quantized Einstein gravitational equation without assuming the existence of macroscopic masses. This also explains the existence of the Dark Energy in the universe. For the weak interaction, by considering plane-wave electron and the zero-point energy, we obtain a wavefunction that represents a β collapse. In this process, from a different point of view than Weinberg-Salam theory, we derive the masses of the W and Z bosons and the neutrino, and we calculate the radius of the neutron. For the strong interaction, we previously reported an analytical theory for calculating the mass of a proton by considering a specific linear attractive potential obtained from the zero-point energy, which agrees well with the measurements. In the present study, we calculate the strong interaction between two nucleons, i.e., the mass of the pi-meson. The resulting calculated quantities agree with the measurements, which verifies our proposed theory.

The pulsatile flow rate (PFR) in the cerebral artery system and shunt ratios in bifurcated arteries are two patient-specific parameters which may affect the hemodynamic characteristics on the pathobiology of cerebral aneurysms (CAs). Accordingly, a systematic study was employed to investigate the effects of the two parameters on hemodynamic characteristics in two internal carotid artery sidewall aneurysms (i.e., ICASA-1 and ICASA-2) models. Numerical results indicate larger PFRs can cause higher WSS in some local regions of the aneurysmal dome that may increase the probability of small/secondary aneurysms generation than under smaller PFRs. The low WSS and relatively high oscillatory shear index (OSI) could appear under a smaller PFR, which has the potential to cause aneurysmal sac growth and rupture. However, the variances in PFRs and bifurcated shunt ratios have rare impacts on the time-average pressure distributions on the aneurysmal sac, although a higher PFR can contribute more to the pressure increase in ICASA-1 dome due to the relatively stronger impingement by the redirected blood stream than in ICASA-2. Simulation results also present the variances of shunt ratios have rare impacts on the hemodynamic characteristics in sacs, mainly because the bifurcated location is not close enough to the sac in present models. Furthermore, it has been found that the vortex location plays a major role in the temporal and spatial distribution of the WSS on the luminal wall, varying significantly with the cardiac period.

The paper briefly reviews the Clifford algebras of space Cl(3,0) and anti-space Cl(0,3) with a particular focus on the paravector representation, emphasizing the fact that both algebras have an isomorphic center represented just by two coordinates. Since the paravector representation allows assigning the scalar element of grade 0 to the time coordinate, we consider the relativity in such two-dimensional spacetime for a uniformly accelerated frame with the constant acceleration 3Hc. Using the Rindler coordinate transformations in two-dimensional spacetime and then applying it to Minkowski coordinates, we obtain the FLRW metric, which in the case of the Clifford algebra of space Cl(3,0) corresponds to the anti-de Sitter (AdS) flat (k=0) case, the negative cosmological term and an oscillating model of the universe. The approach with anti-Euclidean Clifford algebra Cl(0,3) leads to the de Sitter model with the positive cosmological term and the exact form of the scale factor used in modern cosmology.

This article aims to analyze household energy data to predict electricity self-sufficiency and identify the key features that impact it. For this purpose, we use SHAP (Shapley Additive Explanations), LightGBM (Light Gradient Boosting Machine), and a correlation heatmap-based framework to analyze 12 months of energy and questionnaire survey data collected from over 200 smart houses in Kitakyushu, Japan. We use the SHAP summary plot to identify the impact-wise order of key features influencing the electricity self-sufficiency rate (ESSR). Using SHAP, we demonstrated that key features are; housing types, average monthly electricity bill, floor heating, electric capacity, number of washing and drying machines, fee plans, occupation of household head, total floor area, average monthly gas bill, cooking equipment, etc. Furthermore, we adopted the LightGBM classifier with $\ell^1$ regularization to extract the most significant features and predict the electricity self-sufficiency rate of households. This LightGBM-based model can also predict the electricity self-sufficiency rate of households that did not participate in the questionnaire survey. A heat map is also used to analyze the correlation among household variables. The findings discussed in this article offer valuable insights for energy policymakers to achieve the targets of energy self-sufficient houses.

This paper explores the application of machine learning (ML) algorithms in predicting trends in the fixed bond market, where traditional analytical methods have proven inadequate. Focusing on various ML techniques such as supervised and unsupervised learning, neural networks, and deep learning, the study evaluates their effectiveness in forecasting market movements. It details a series of experiments in which different ML models are rigorously trained and tested against historical bond market data. The findings reveal that models employing time series analysis and advanced deep learning show marked potential in accurately predicting bond market trends. Additionally, the paper delves into the challenges and limitations inherent in these ML approaches, including data requirements and the risk of model overfitting. Finally, it proposes directions for future research, emphasizing the integration of ML into broader financial market analysis.

Rescaling of rainfall requires measurements of rainfall rates over many dimensions. This paper develops one approach using 10 m vertical spatial observations of the Doppler spectra of falling rain every 10 seconds over intervals varying from 15 up to 41minutes in two different locations and in two different years using two different Micro-Rain Radars (MRR). The transformation of the temporal domain into spatial observations uses the Taylor ‘frozen’ turbulence hypothesis to estimate an average advection speed over an entire observation interval. Thus, when no other advection estimates are possible, this paper offers a new approach for estimating the appropriate frozen turbulence advection speed by minimizing power spectral differences between the ensemble of purely spatial radial power spectra observed at all times in the vertical and those using the ensemble of temporal spectra at all heights to yield statistically reliable scaling relations. Thus, it is likely that, MRR and other vertically pointing Doppler radars may often help to obviate the need for expensive and immobile large networks of instruments in order to determine such scaling relations, but not the need of those radars for surveillance.

In the standard model (SM) and general relative theory (GR) based on the 4-D Minkowski space, the graviton and photon are massless. In that case, two particles with the positive masses are attracted to each other by the gravitational (graviton) waves. The origin of the attractive gravitational force is not understood in terms of SM and GR. In the present work, the 3-D quantized space model (TQSM) based on the 4-D Euclidean space is applied to explain the attractive gravitational force. The repulsive Coulomb force between two particles with the positive charges is explained by using the destructive interference of the electric waves emitted from two particles. Therefore, the destructive interference of the gravitational (graviton) waves emitted from two particles with the positive masses should make the repulsive gravitational force (F_r). The observance of the attractive gravitational force (F_g) indicates the non-zero graviton mass because the attractive gravitational force can be explained if the gravitational (graviton) waves are the oscillating mass waves. The masses lost during the destructive interference of the gravitational (graviton) waves are converted to the gamma rays. These induced gamma rays make the new attractive force (F_a). The observed attractive gravitational force (F_g) should be originated by the equation of F_g = F_a – F_r > 0. This can explain the reason why the gravitational force (F_g) between the elementary particles is so weak when compared with the Coulomb forces. The properties of elementary particles in terms of the TQSM model are analyzed by the wave mechanics of G, E and M waves of the 3-D quantized photon space. The G wave is the time fluctuations along the (absolute) time axis and E (electric) and M (magnetic) waves are the space fluctuations along the space axes. The elementary particles exist as the particle forms with the constant (rest) masses (m) at the low speed. The elementary particles at the high speed have the (particle) wave forms with the oscillating masses or the particle forms with the relativistic masses (gm). The graviton has the very small mass moving with the very high-speed close to the light speed of c. This means that most of the gravitons exist as the graviton wave forms. The particle waves are coupled with the photon waves (2EM, gamma rays) because of the energy conservation. It is concluded that the gravitational waves are the coupled oscillating forms (GEM waves) of the graviton waves and photon waves. The existence of the wave forms for the particles can explain the double slit experiment for the electron beams. And the attractiveness of the dark matter, weak and strong forces is explained by the virtual two boson processes with the TC symmetry and total energy conservation. All elementary bosons and neutrinos are considered as the wave forms with the high speed close to the light speed of c. Because of the charge and energy conservations, only the neutrino oscillations and dark matter (baston) oscillations are allowed.

Dirac's Large Number Hypothesis (LNH), proposed in 1937, has captivated the scientific community with its exploration of profound correlations between cosmic and atomic scales. This hypothesis delves into the intricate interplay between the infinitesimally small and the vastly large, offering potential insights into the fundamental nature of the universe. As we continue to uncover the mysteries of the cosmos, the LNH oscillates on the precipice of scientific acceptance—neither fully validated nor entirely dismissed. In this review paper, we embark on a comprehensive journey through Dirac's LNH, shedding light on its theoretical underpinnings, its implications for universe models, and its resonance with the Anthropic Principle. We delve into the possibilities of variable gravitational constants and continuous mass creation, inviting further exploration into the intricacies of our cosmic symphony. By embracing the ongoing quest for understanding, we endeavor to unravel the profound harmonies that connect the infinitesimal with the infinite, contributing to the symphony of knowledge in theoretical physics and cosmology.

Recently, more wind turbine systems are being installed in deep waters far from the coast. Several concepts of floating wind turbine systems (FWTSs) are developed, among which the semisubmersible platform, due to its applicability in different water depths, good hydrodynamic performance, and facility in the installation process, constitutes the most explored technology compared to the others. However, a significant obstacle to the industrialization of this technology is a design of a cost-effective FWTS, which can be achieved by optimizing the geometry, size and weight of the floating platform, along with the mooring system. This is only possible by selecting a method capable of accurately analyzing the FWTS coupled hydro-aero-structural dynamics at each design stage. Accordingly, this paper aims at providing a detailed overview of the most common coupled numerical and physical methods, including their basic assumptions, formulations, limitations, and costs, used for analyzing the dynamics of FWTSs, mainly those supported by a semisubmersible, to assist the choice of the most suitable method at each design phase of FWTSs. Finally, the article discusses possible future research to address challenges in modeling FWTSs dynamics that persist to date.

Formalism proofing general derivation, applying matrix properties operations, showing fundamental relationships with inner product to outer product has been advanced here. This general proof formalism has direct application with physics to quantify quantum density at micro scale level to time commutator at macro scale level. System of operator algebraic equations have been rigorously derived to obtain analytic solutions which are physically acceptable. Extended physics application will include metricizing towards unitarization to achieve gaging Hamiltonian mechanics to electromagnetic gravitational strong theory, towards grand unifying physics atomistic to astrophysics or vice versa via quantum relativistic general physics thereby patching to classical physics fields energy.

Many academics are critical of the current publishing system, but it is difficult to create a better alternative. This review relates to the Sciences and Social Sciences, and discusses the primary purpose of academic journals as providing a seal of approval for perceived quality, impact, significance, and importance. The key issues considered include the role of anonymous refereeing, continuous rather than discrete frequency of publications, avoidance of time wasting, and seeking adventure. Here we give recommendations about the organization of journal articles, the roles of associate editors and referees, measuring the time frame for refereeing submitted articles in days and weeks rather than months and years, encouraging open access internet publishing, emphasizing the continuity of publishing online, academic publishing as a continuous dynamic process, and how to improve research after publication. Citations and functions thereof, such as the journal impact factor and h-index, are the benchmark for evaluating the importance and impact of academic journals and published articles. Even in the very top journals, a high proportion of published articles are never cited, not even by the authors themselves. Top journal publications do not guarantee that published articles will make significant contributions, or that they will ever be highly cited. The COVID-19 world should encourage academics worldwide not only to rethink academic teaching, but also to re-evaluate key issues associated with academic journal publishing in the future.

The article is devoted to the preliminary concept of the Future Planetary Defense System (FPDS), emphasizing Astroballistics. This paper is intended to support international efforts to improve the planetary security of the Earth. The work covers three areas of knowledge: Astronautics, Astrodynamics, and Astroballistics. The most important part of the presented article is dynamic, contact combat modeling against small, deformable celestial bodies. For these purposes, the original, proprietary hydrocode of the Free Particle Method (HEFPM-G) with gravity was used. The main aim of combat is to redirect the Potentially Hazardous Objects (PHOs) to orbits safe for the Earth or destroy them. This concept's first task is to find, prepare and use dynamic three-dimensional models of celestial bodies' motion and spacecraft or human-crewed spaceships in the Solar System's relativistic frame. The second task is to prepare the FPDS' architecture and computer simulation space missions' initial concepts in the internal part of the solar system. The third and main task covers simulating, using hydrocodes, selected methods of fighting 100 m and 140 m diameter asteroids. The order of the article is as follows. The first part of the article presents an architecture and FPDS' modus operandi. Preliminary design and development of FPDS' space missions, including navigation, mission dynamics simulation, is prepared using an open-source space mission analysis and design tool. E.g., Asterank and Trajectory Browser or GMAT are presented in the second part. The third part of the article is devoted to computer hydrocodes (HEFPM-G) and the modeling and simulation of asteroid–asteroid collision, laser radiation effects on an asteroid, and FPDS spacecraft's warhead contact interaction on the small celestial body. The authors formulated the Main Planetary Defense Problem (MPDP) in this paper. The proposition of this problem solving has been realized by preparing its concepts, architecture, and modus operandi of the FPDS mission. Finally, a series of realistic simulations were made using hydrocode to deflect or destroy dangerous asteroids. The summary and conclusions can be found in the fourth part of the article.

This article is some review of results that were obtained at 2007-2021 years development of “The Information as Absolute” concept and the informational physical model, which is based on the concept; including a number of fundamental physical problems are briefly considered in framework of the conception and the model. Recently in physics there are several publications, that present lists of the problems. However, those lists are essentially incomplete, for at least two reasons. Firsts of all, a number of phenomena are studied traditionally by philosophy, and so corresponding problems are usually considered to be “metaphysical”. However, they relate also to some concrete physical phenomena. For example, physics evidently studies Matter, and so the metaphysical problems “what is ontology of Matter”, “what is “Space”, “Time” and a few other physical phenomena and notions as well, are really a Meta-physical problems “what does physics study?” There are other fundamental physical problems, which are not considered as such in physics, and are absent in the “fundamental problems lists”. Those include the problems, which really exist, yet are incorporated into standard physical theories, and so are fundamental “implicitly”, which in physics are “solved by default” ‒ and mostly erroneously. Note, though, that a number of “Meta-physical”, and concrete fundamental, problems more in detail are considered in the paper “The Informational Conception and Basic Physics”, https://arxiv.org/abs/0707.4657, v5 (2021), so this paper is, in certain sense, an expanded conclusion of this paper, which includes, correspondingly, more in detail consideration of some more general physical problems; and, besides, in this article, the problem “what are Gravity and Electric Forces” is essentially clarified comparing with the arXiv 2021 paper version above, and additionally initial model of Nuclear Force is presented. Besides, the concrete problem “What is Life”, and the rational cosmological model, where a few vague points in standard cosmology rather probably are rationally clarified, while the fundamental problem “matter – antimatter asymmetry” in Matter is solved with rather large probability, are considered, and one of recently published rather complete “lists of fundamental problems” is commented in Appendix.

Objective: The primary objective of this study was to develop a logistic regression model to predict post-operative in-hospital mortality rates for patients undergoing emergency cardiac surgeries, with the aim of improving predictive accuracy over traditional risk assessment tools and enhancing patient outcomes and clinical decision-making. Methods: Data were collected from 4,855 patients who underwent emergency cardiac surgeries at a tertiary hospital between 2008 and 2017. The analysis incorporated demographic, anthropomet- ric, and clinical factors, including the ASA classification, emergency status, and various preoperative laboratory values. A logistic regression model was developed, and the Elixhauser Comorbidity Index was calculated using standard ICD-10 codes for its comprehensive assessment of comorbidities. Model performance was evaluated using metrics such as AUROC, AUPRC, accuracy, precision, recall, and F1 score. Results: The logistic regression model demonstrated strong predictive performance, with an AUROC of 0.939 and an AUPRC of 0.350. Key pre-operative factors identified included emergency operation status, ASA classification, and preoperative prothrombin time. The model significantly outperformed the traditional ASA classification system, which showed an AUROC of 0.524 and an AUPRC of 0.010. These findings suggest a substantial improvement in predicting post-operative mortality. Conclusion: The logistic regression model significantly improves the prediction of post-operative mortality in emergency cardiac surgeries compared to the ASA classification system. These findings highlight the potential of incorporating comprehensive pre-operative factors into predictive models to enhance clinical decision-making and patient outcomes. Implementing such models in routine clinical practice could lead to more accurate risk assessments, better resource allocation, and improved patient care.

We introduce the linear subgroup of volume-preserving diffeomorphism as the underlying symmetry to construct an action within the effective field theory framework and the Schwinger-Keldish formalism. The formulated action is posited to effectively incorporate dissipative effects into the Navier-Stokes equations.

We mathematically derived a comprehensive theoretic framework “Asymmetry Theory”, based solely on the well-established principle of “the constancy of the velocity of light” without any other assumptions, like the ether. This paper proves that Asymmetry Theory encompasses all results of Special Relativity (STR) as a special case when the observer moves perpendicularly to the “source-observer” line. It explains everything STR does but extends beyond it, offering novel and groundbreaking insights. The longstanding controversies surrounding STR arise from its application outside its intended special case, hence, they are all resolved in Asymmetry Theory. Asymmetry Theory is supported by all experiments supporting STR, like Kaufmann, Ives-Stilwell, muon lifetime, nuclear reaction…., and those contradicting STR, like the Lunar range and GPS tests of light speed and the lack of transverse Doppler shift. Despite its mathematical rigorousness and all experimental evidence, we propose two new experiments to decisively test predictions from both theories.The mathematically derived Asymmetry Theory is a more comprehensive theoretical framework covering STR as a special case. It is self-consistent and theoretically proved by Maxwell’s equations. It does not contradict any established physical observations but instead resolves century-old controversies by providing a unified, mathematical and paradox-free explanation of key phenomena. Furthermore, its groundbreaking results offer a unified perspective across various distinct laws of physics, including: A formula for light velocity mathematically explains the Sagnac effect, one-way light speed, stellar aberration, Michelson-Morley, Hafele-Keating and Optic clocks. Electrodynamics formulas encompass particle acceleration, Mass-Energy and matter wave. A unified formula for all cases of classical and transverse Doppler effects covers time-varying Doppler effect, cosmological redshift, and Cherenkov radiation. A generalized form of Maxwell's equations for moving observers directly derives the formulas for light speed, Doppler effect and Sagnac effect.

Abstract:Shown is the derivation of Lorentz-Einstein k-factor in SRT as an amplitude-term of oscillation-differential equations of second order.This case is shown for classical Lorentz-factor as solution of an equation for undamped oscillation as well as the developed theorem as a second solution for advanced SRT of fourth order with an equation for damped oscillation-states.This advanced term allows a calculation for any velocities by real rest mass

This paper presents MADS (Multi-Agents for Data Science), an innovative and simple open-source multi-agent framework designed for systemic pipeline execution in applied supervised machine learning. By leveraging the capabilities of multi-agent systems (MAS), we introduce a universal approach to optimize and streamline machine learning pipelines. Our framework highlights the differences between various types of agents, such as reinforcement learning (RL) agents and large language model (LLM) agents, and their distinct contributions to the process. While we currently employ LLM agents to automate and enhance machine learning tasks, we acknowledge the potential of incorporating RL agents in future iterations to further improve performance and adaptability. The primary objective is to enhance the efficiency, scalability, and adaptability of supervised learning applications across various domains. This integration addresses the complexity and manual effort typically associated with machine learning workflows, paving the way for more automated, robust, and scalable solutions. Our approach demonstrates significant improvements in task automation, reduced human intervention, and enhanced model performance. The MADS framework, which will soon be available as an open-source implementation, represents a pivotal contribution to the field of machine learning, promising to facilitate broader adoption and collaborative advancement.

There are many molecules used as drug carrier. TUD-1 is a newly synthesized mesoporous silica (SM) molecule possess two important features; consists of mesoporous so it is very suitable to be drug carrier in addition to that it has the ability to induce apoptosis in cancer cells. However, the effect of TUD-1 appears to act as cell death inducer, regardless of whether it is necrosis or apoptosis. Unfortunately, recent studies indicate that a proportion of cells undergo necrosis rather than apoptosis, which limits the use of TUD-1 as a secure treatment. On the other hand, lithium considered as necrosis inhibitor element. Hence, current study based on the idea of production a new Li/TUD-1 by incorporated mesoporous silica (TUD-1 type) with lithium in order to produce a new compound that has the ability to activate apoptosis by mesoporous silica (TUD-1 type) and at the same time can inhibit the activity of necrosis by lithium. Herein, lithium was incorporated in TUD-1 mesoporous silica by using sol-gel technique in one step synthesis procedure. Moreover, lithium was incorporated in TUD-1 with different loading in order to form different active sites such as isolated lithium ions, nanoparticles of Li2O, and bulky crystals of Li2O. The ability of the new compounds to induce apoptosis and prevent necrosis was evaluated on three different types of cancer cell lines which are; liver HepG-2, Breast MCF-7 and colon HCT116. The obtained results show that Li/TUD-1has the ability to control necrosis and thus reduce the side effects of treatments containing silica in the case of lithium has been added to them, especially in chronic cases. This has been demonstrated by the significant increase in the IC50 value and cell viability comparing to control groups. Consequently, the idea is new, so it definitely needs more develop and test with materials that have more apoptotic impact than silica in order to induce apoptosis without induction of necrosis.