The paper addresses an analysis of the efficiency and profitability of the operation of a photovoltaic installation located in the geometric centre of Europe (near Białystok, Poland), where the intensity of solar irradiation is not too high compared to other European countries. It is calculated that in that place average solar irradiation being lower even by approx. 26 kWh than that for the whole Europe, which results in a 26% drop in the economic potential of the utilisation of solar energy for its conversion. A case study and an economic analysis show that without minimum funding amounting to 50% of the investment costs paid for the modernisation of a central heating system assisted by PV cells, the time of return of pecuniary expenditures exceeds 7 years. Apart from the Simple Pay-Back Time SPBT, discount indicators determined in the paper also include the net present value NPV and the internal rate of return IRR. Moreover, a direct ecological effect has been determined for such an investment.

The size of TiO2 (either nanometric or micrometric) can significantly affect both its photocatalytic and photoelectrochemical properties, thus altering the photooxidation of organic pollutants in air or water. The purpose of this work is to give an account of the photoelectrochemical and photocatalytic features of some nano- and micro-sized TiO2 commercial powders towards a model reaction, the photooxidation of acetone. Cyclic voltammograms (CV) of TiO2 particulated electrodes under UV illumination experiments were carried out in either saturated O2 or N2 solutions for a direct correlation with the photocatalytic process. In addition, the effect of different reaction conditions on the photocatalytic efficiency under UV light in both aqueous and gaseous phases was also investigated. CV curves with the addition of acetone under UV light showed a negative shift of the photocurrent onset, confirming the efficient transfer of photoproduced reactive oxygen species (ROSs), e.g., hydroxyl radicals, or holes to acetone molecules. The photocatalytic experiments showed that the two nano-sized samples exhibit the best photocatalytic performance. The different photoactivity of the micro-sized samples is probably attributed to their morphological differences, affecting both the amount and distribution of free ROSs involved in the photooxidation reaction.

COVID-19, previously known as “2019 novel coronavirus”, is a newly discovered virus which causes severe acute respiratory syndrome, similar to corona virus 2 (SARS-CoV-2), which has spread widely through human to human contact and was declared a pandemic by the WHO in March 2020. To cope with this pandemic many countries have adopted nationwide lockdowns which restrict nonessential activities and encourage their populations to avoid public transport, work from hone wherever possible, and to maintain social distancing at all times. While the severity of these shutdowns has varied with country, large geographic regions of the world (including China, India, Iran, Italy, Spain, and the USA) have all been severely affected, not just in the loss of human life, but also in terms of the financial impacts the lockdowns will have on their countries future prosperityIt was previously reported that a number of environmental factors, including humidity and temperature, played an important role in development and spread of the SARS-Corona Virus infection with the virus retaining viability for over 5 days at temperatures between 22–25^oC and relative humidity (RH) of 40–50%. Whereas, elevated temperatures and higher RH (38^oC, and >95% RH) decreased virus viability (Kroumpouzos et al., 2020). The spread of COVID-19 started in low temperature areas of China, with major outbreaks subsequently occurring in Iran, Japan, Northern Italy and South Korea. These new virus epicenters all had similar temperature and latitude, along the 30-50^◦N” zone. Subsequently, the virus was spread to regions of elevated temperature, such as India, the Middle East and Thailand, due to international travel (Kroumpouzos et al., 2020).The aim of this study was to consider the environmental impact of COVID-19, including water pollution. The paper is divided into four sections. In the first section the current literature related to COVID-19 is reviewed. In the second section a recent update on COVID-19 globally is presented, followed by a descriptive impact on the environment in the third section and finally in the fourth section the COVID-19 related worldwide environmental impact is discussed. Since COVID-19 is a currently an active pandemic with no end in sight, while constructive conclusions can only be made on the limited data currently, which may be prone to high errors. However, these conclusions may provide some preliminary suggestions for assisting in assessing spreading patterns of COVID-19 across the globe, and may be of long-term significances with respect to assessing the environmental impact of lockdown policies due to COVID-19 worldwide.

This paper discusses the potential and limitations of the Normalized Difference Vegetation Index (NDVI) in environmental justice, health and inequality studies in urban areas. Very often the NDVI is correlated with socioeconomic and/or sociodemographic data to demonstrate the inequality in environmental settings that themselves influence individual health and questions of environmental justice. This paper addresses the limits of the NDVI for such applications and as well its potential, if applied properly. The overall goal is to make people of disciplines other than those that are geo-related aware of the characteristics, limits and potentials of satellite image-based information layers such as NDVI.

For the first time the distribution and modifications of living ostracod associations present in the Gulf of Trieste (GoT) in relation to the alterations caused by human activity in the last 20 years were investigated. The results were compared with the main chemico-physical parameters (especially nitrogen and phosphorus) measured over the same period, which can lead to a general decrease in environmental quality. For a more in-depth analysis of the changes recorded by ostracods in the last 50 years, a period in which eutrophication and anoxia increased, we revisited the study carried out by Masoli in the GoT in 1967. The results obtained made it possible to verify how over the last 20 years, ostracod assemblages have suffered a decrease both qualitatively and quantitatively. Most of the species recovered show characteristics of opportunism and tolerance to environmentally stressful conditions, high organic matter concentrations and oxygen deficiency. The ostracods analyzed in 1967 showed similar results with few dominant opportunistic species. We verified how ostracods recorded in GoT, similar to Mollusks and Foraminifera, the possible environmental crisis linked to the recurrence of mucilage and hypoxic events documented for the Gulf of Trieste in the last 50 years. Finally, a comparison with the best environmental conditions found in the Marine Nature Reserve of Miramare (MPA) allowed us to emphasize the important role of protected areas to avoid the loss of biodiversity due to urbanization.

The physical environment plays an important role in the transmission of respiratory infections like Covid-19. To find relevant articles on environmental factors influencing respiratory infection outbreaks, we searched Pub med Central on the following topics: 1. Environmental pollution causing coronavirus fatality- 73 results, relevant 1 article, 2. Environmental factors affecting Covid-19, 149 results from which there were 6 relevant articles, 3. Impact of air pollution on Covid-19 fatality, 10 results, relevant 3 articles, 4. Environmental factors affecting respiratory viruses- 10646 results were obtained, 2 relevant articles. We searched Google scholar on environmental factors affecting Covid-19 transmission and found 7 relevant papers. We excluded the duplicates in each of the key words search. Date of search was on 20^th April 2020. All articles included in results were scrutinized and relevance of articles was based on their content that discussed meteorological and physical environment factors in the spread and severity of Covid-19. We have discussed factors like air pollution, smoking, air temperature, humidity and air velocity as contributing factors. If meteorological factors are conducive to spread in a particular area, we need protective measures way before a respiratory infection outbreak occurs. Covid-19 is a lesson learnt the hard way, and we must enable people to practice hygienic practices with limited resources but high level of protection that it provides. Air pollution control can prevent priming of respiratory system which shall further protect from pulmonary infections.

Buildings use 30-40 % of all energy resources and are thus their main consumers in modern society. Moreover, buildings require a vast amount of different raw materials. During the last two decades, several green building certifications have been created in order to consider social, economic and environmental aspects of sustainability of buildings. One of the most famous and widely used of these certifications is Leadership in Energy and Environmental Design (LEED). So far, the use of LEED has concentrated in the US and other developed countries. One reason that restricts the use of this point-based system certification in developing countries is the limited data about its costs. In this study, the extra cost of the certification process will be evaluated besides the changes needed in the design of the building to reach the points required by LEED. At the first stage, the number of points the case study earns in its current format (Scenario 1) were found out, then the cost difference of getting either the Certified (Scenario 2) or Silver (Scenario 3) level LEED certification for the building was studied. It was found that besides some technical considerations, filling the criteria of the Certified and Silver level increases the total costs of construction by 3.4% and 5.9%. Further improvement of the building’s energy efficiency would enable the attainment of a higher-level certification. The results of the study could help to promote the use of green building certifications in Western Asia.

The polynomial functional specification is widely used in environmental and ecological economics. When different powers of the same variable enter to the specification the elasticity of explained variable with respect to that variable should be obtained using the elasticity formula. Since, in this case the elasticity itself is a function, one need to calculate it at a certain point, to have a general idea about the response of explained variable to the change in explanatory variable. The mainly used point is mean of the variables entering to the elasticity formula. Sometimes, the minimum and maximum points also used for comparison purposes. One should careful in interpreting the response of explanatory variable to the change in the variable entering to the specification with its different powers. This study revisits some methodological points regarding the calculation and interpretation of responses in the above-mentioned cases.

The Bologna Process and the European Higher Education area require the application of new active methodologies in the classroom that place the student at the center of his or her learning process. In the present work we analyze the application of a Service-Learning methodology in the context of a Final Degree Dissertation (FDD) in the degree in Environmental Sciences at the University of Extremadura (Spain). The project deals with an isolated Kichwa community in Ecuador and involves the development of alternative science education materials for the capacitation of in-service science teachers. This paper evaluates how an FDD carried out according to self-learning (SL) principles can help in the acquisition of so-called soft skills and how these can be focused in the promotion of the Sustainable Development Goal (SDG) knowledge and achievement. To this end, a qualitative study of the experience and a deep evaluation, followed by a final reflection, were carried out. According to the preliminary results, we can conclude that Higher Education should include SDGs in its teaching praxis and could do this successfully using the SL methodology.

Due to remarkable socioeconomic development, an increasing number of karst rocky desertification areas have been severely affected by human activities in southern China. Effectively analyzing human activities in karst rocky desertification areas is a critical prerequisite for managing and restoring areas with tremendous negative impacts from desertification. At present, a timely and accurate way of quantifying the spatiotemporal variations of human activities in karst rocky desertification areas is still lacking. In this communication, we attempted to quantify human activities from the corrected NPP-VIIRS nighttime light data from 2012 to 2018 based on statistical analysis. The results show that a significant increase of night lights could be clearly identified during the study period. The total nighttime lights (TL) related to severe karst rocky desertification (S) were particularly concentrated in Guizhou and Yunnan. The nighttime light intensity (LI) related to the S areas in Chongqing were the strongest due to its rapid socioeconomic development. The annual growth rate of nighttime lights (GL) has been slow or even negative in Guangdong because of its various karst rocky desertification restoration programs. This communication could provide an effective approach for quantifying human activities and provide useful information about where prompt attention is required for policy-making on the restoration of the karst rocky desertification areas.

It is important for enterprises to decide their environmental policies after carefully examining their future paths based on the relationship between the environment and the economy. This study focused on Japanese minimum administrative divisions (municipalities) and attempted to quantify the annual environmental efficiency of production activities within each division according to the theory of life-cycle impact assessment (LCIA). This study leverages the assessment theory LIME2, which is an endpoint-type LCIA method developed in 2010 that integrates environmental loads for certain impact categories, such as global warming and land use into a simple indicator by monetary unit. First, annual environmental impact assessments were conducted for all Japanese municipalities based on statistical information that was reliable, verifiable, and comparable. Next, the environmental efficiency of productivity for each division was conceptualized by dividing the gross domestic product by the environmental damage amounts as calculated above. Assessment results for each municipality were placed on a map of Japan in order to visualize the regionality of each indicator. The findings revealed in this study will aid public administrators in their decision-making process with respect to environmental policies.

Consideration of climate change in Environmental Impact Assessment (EIA) is a rather novel topic, which became partly mandatory through the revised EU Directive on EIA. Through a mixed-methods approach involving key-actors from EIA practice, decision making and climate adaptation planning, this study presents a transdisciplinary point of view on barriers and opportunities to tackle climate change adaptation in environmental assessment of large-scale projects. It is based on both a retrospective ex-post evaluation of existing practices in Austria and Germany as well as prescriptive examination and development of outcomes for practice through the development of a climate-fit toolkit that supports the incorporation of climate change impacts into EIAs. The scenario analysis applied with a back casting approach provided the opportunity to look beyond limitations related to legal compliance and partly lack of data identified by previous research. Three scenario narratives were elaborated based on nine key impact factors based on literature review, content analysis of EIA documents and interviews with EIA actors. The groups of actors carried out a prioritization of actions towards consideration of climate change in EIA. Finally, the actors were involved in co-production of an online tool-kit for Austrian and German EIA practice.

Conservation of natural habitats in human-dominated landscapes is critical for halting biodiversity loss. Maintaining habitat quantity and connectivity requires landscape-level collective action, which results from environmental decisions made by individual land owners. We investigate how individual decision making in a rural collective translates into quantitative differences in landscape-level environmental outcomes. Behavioral science has become a critical domain of knowledge in conservation, but little attention has been paid to how multiple behavioral drivers determine the success of collective environmental action. We developed a social-ecological model for landscape-level conservation using a detailed data set of 600 land owners in New Zealand. With the model, we tested whether the effect of social influence networks on collective conservation action was altered by their interplay with land owners’ personal characteristics, connections to cross-scale actors and local environmental contexts. Interactions between multiple behavioral drivers determined the environmental outcomes of collective action in unexpected ways by modifying, muting or amplifying the effects of single drivers. Importantly, we detected a social-ecological mechanism for rapid change in the extent of protected habitats, which can explain highly successful or failed environmental outcomes of collective conservation. Further, when environmentally desirable and undesirable behaviors spread simultaneously through the social network, homophily and network cohesion hinder desirable environmental outcomes. This effect can be modified by other drivers such as social responses to local environmental change. Thus, understanding how the antagonistic and synergistic effects of behavioral drivers can be best utilized in conservation will benefit biodiversity and ensure benefits that humans obtain from biodiversity.

Energy and Environment Tax is used globally as a means of environment policy. Energy and Environment tax plays an important role as a driving force for the conversion to environmentally friendly energy. The basic tax principles considered in the design of energy and environmental taxation increases the efficiency of policy instruments. The purpose of this study is to evaluate South Korea’s energy and environmental taxation based on tax principles, namely, equity, efficiency, simplicity, flexibility, and accountability and to suggest directions for improvement. This study applied a methodology that provides policy implications, such as reviewing existing literature and comparing energy and environmental taxes. Results of this study show that South Korea’s energy and environmental taxation is negative in terms of equity, simplicity, and accountability. South Korea’s current energy and environmental tax is regressive to income classes and complex tax structures and it does not objectively measure the impact of energy and environmental taxation. However, energy and environmental taxation is evaluated positively in terms of efficiency and flexibility because it meets the greenhouse gas reduction policy and operates a flexible tax rate. The results of this analysis provide policy implications for reorganizing South Korea’s energy and environmental taxation

Logistics in urban areas are currently suffering a radical transformation due to increasingly population concentration and the massive use of cars as the preferred transport mode. These issues have resulted in higher pollution levels in urban environments and traffic congestion impacting the world globally. Facilitating the use of sustainable transport modes is widely regarded as a necessity to cope with these adverse effects on citizens’ life quality. Hence, some regions, as the European Union, are encouraging bus transport firms to make their business models more environmentally and socially sustainable. The aim of this research is thus to explore how practices adopted by urban bus companies can improve cities’ sustainability. With this in mind, a combined Importance Performance Analysis (IPA)-Analytic Hierarchy Process (AHP) method was applied. In this way, both environmental and social sustainability effects of developed practices were represented through hierarchical structures separately. Subsequently, importance and performance ratings of practices in each sustainability dimension were estimated, and thus two IPA grids were generated. These grids support managers in the establishment of more effective action plans to improve logistics sustainability in cities. Findings also provide guidance to governments on the practices that should be promoted in future urban mobility plans.

Contemporary architects and the construction industry are trying to cope with increasing requirements concerning energy efficiency and environmental impact. One of the available options is the active utilization of energy gains from the environment, specifically solar energy gains. These gains can be utilized by, for example, solar walls and facades. The solar façade concept has been under development for more than a century. However, it hasn’t achieved widespread use for various reasons. Rather recently the concept was enhanced by the application of transparent insulation materials that have the potential to increase the efficiency of such façades. The presented study evaluates the environmental efficiency of 10 solar façade assemblies in the mild climate of the Czech Republic, Central Europe. The evaluated façade assemblies combine the principles of a solar wall with transparent insulation based on honeycomb and polycarbonate panels. The study applies Life-Cycle Assessment methodology to the calculation of environmental impacts related to the life cycle of the evaluated assemblies. The results indicate that even though there are several limiting factors, façade assemblies with transparent insulation have lower environmental impacts compared to a reference assembly with standard thermal insulation. The highest achieved difference is approx. 84% (in favour of the assembly with transparent insulation) during a modelled 50-year façade assembly service life.

The ongoing growth of international occurrence of depression and its ability to co-occur with other serious medical disorders such as heart disease, cancer, diabetes, and Parkinson’s disease is a current public health problem. Inhibitor of DNA-Binding/Differentiation (ID) proteins are part of a group of transcriptional factors that have been seen to be involved in neurocognitive disorders and therefore, may have influence on depressive disorders. Previously, it has been established that environmental estrogenic endocrine disruptors (EEDs) such as polychlorinated biphenyls (PCBs) & bisphenol A (BPA) have played an important role in the impact of depressive disorders. Hence, based on many studies, we consider the impact of these environmental pollutants on the group of ID proteins. Improved understanding of how the interaction of ID proteins by EED exposure can influence depressive disorders will contribute essential evidence that can further benefit our public health community with innovative knowledge to prevent these types of mental illnesses.

Electronic Nose (eNose) systems are particularly appreciated for their portability, usability, relative low cost and real-time or near real-time response. Their application finds space in several domains, including environmental monitoring. Within this field, marine monitoring is of particular scientific relevance due to the fragility of this specific environment, daily threatened by human activities that can potentially bring to catastrophic and irreversible consequences on marine wildlife. Under such considerations, a systematic review, complying with the PRISMA guidelines, was conducted covering the period up to October 15, 2018, in PubMed, ScienceDirect and Google Scholar. Despite the relatively low number of articles published on this specific topic and the heterogeneity of the technological approaches employed, the results obtained by the various groups highlight the positive contribution eNose has given and can provide in near future for the monitoring and safeguarding of this delicate environment.

Human-generated, natural occurrences and other actions connected with the petroleum industry have contributed expansively to the contamination of numerous areas of human habitant, thus effecting overwhelming challenges and constraints to sustainable human health, development and the biosphere. The sites commonly associated include derelict pits, hydrocarbon onshore release sites, and places to where oil slicks exuding from offshore releases are blown onshore. In diverse cases, remediation is pertinent to restore the affected ambient. This is required despite the complexity and intricate pore structure and fluid trafficking trajectories of soil which are not easily amenable to remediation. Due to the complex assemblage of contaminated soil, it is necessary to conduct an encompassing site assessment by considering the potential impact of the environment and human health prior to proper selecting and implementing of a desirable remediation process. There are extant remediation methodologies which are effective and efficient for the clean up of contaminated shorelines and other petroleum-contaminated sites involving inter alia agricultural activities. There are salient variations in the techniques to expunge contaminants regarding spatiotemporal and pecuniary costs or considerations due to the gross environmental hazards entailed. This study provides for the opportunity to harness and sustain the capacity for the mitigation of untoward impacts, and induce the latitude for an enabling condition in sustainable human health, environment and development in the petroleum industry and other anthropogenic activities.

Over the last few decades, urban expansion and population shifts have modified the existing landscape throughout the U.S. Protected areas and development are compatible lenses, yet stakeholders’ involvement in decision-making is often missing from environmental governance. We examine how stakeholders living and working in proximity to Everglades National Park (EVER) perceive environmental and social changes to the park and community park relations. EVER was selected as a study site for several reasons: proximity to urban areas, rich biological diversity, largest subtropical wilderness in the U.S., International Biosphere Reserve, World Heritage Site, and prominence as a tourist destination for the region. Forty-one semi-structured interviews were conducted with neighborhood groups, representatives from gateway communities, and conservation organizations. An analysis of the interview data generated six research themes: loss of native species, urban development, a shortage and contamination of water, hurricanes, climate change, and increased recreation use. The results of this study add to the literature by providing a better understanding of the relationships stakeholders have with national parks. The results will provide useable knowledge that may help stakeholders and public land managers design strategies related for sustainable plans for the park and its surrounding communities.

This study aimed to evaluate the relationship between various asbestos exposure routes and asbestos-related disorders (ARDs). The study population comprised 11,186 residents of a metropolitan city who lived near asbestos factories, shipyards, or in slate roof-dense areas. ARDs were defined from chest X-rays indicating lower lung fibrosis (LFF), pleural disease (PD), and lung masses (LMs). Of the subjects, 11.2%, 10.4%, 67.2% and 8.3% were exposed to asbestos via occupational, household, neighborhood, and slate roof routes, respectively. Regarding adjusted confounders and other exposure routes, the odds ratio (OR) of PD from household exposure (i.e., living with asbestos-producing workers) was 1.9 (95% confidence interval: 0.9–4.2), and that of LLF and PD from neighborhood exposure, or residing near asbestos factories) for <19 or >20 years, or near a mine, were 4.1 (2.8–5.8) and 4.8 (3.4–6.7), 8.3 (5.5–12.3) and 8.0 (5.5–11.6), and 4.8 (2.7–8.5) and 9.0 (5.6–14.4), respectively. The ORs of LLF, PD, and LM among those residing in slate-dense areas were 5.5 (3.3–9.0), 8.8 (5.6–13.8), and 20.5 (10.4–40.4), respectively. Substantial proportions of citizens residing in industrialized city have potentially been exposed to asbestos, and various exposure routes are associated with the development of ARDs. Notably, this may be the first finding of the health effects of slate roof exposure. However, given the limitations of this study, including potential confounders such as socioeconomic status, further research is needed.

In response to ever-increasing concerns regarding ecological degradation and societal impact, numerous stakeholders such as non-governmental organisations, government officials, end-users, the mass media, and community activists have compelled business organizations, particularly multi-national companies to lessen harmful greenhouse gases emissions associated with their production activities. Energy sector is one of the biggest harmful greenhouse gases emission producer, hence, decision-makers within the energy sector are forced to promote and build environmental friendly and sustainable power generation plants. To this end, the concept of sustainability in the electricity sector has attracted so much attention from academics and industrial practitioners over the last three decades. Albeit, an important number of sustainability assessment frameworks for electricity generating technologies are found in the current literatures, three major drawbacks have emerged from those frameworks. Firstly, there is a lack of a holistic and comprehensive sustainability assessment framework for different power generation plants. Secondly, from economic aspect, the most used model (Levelised Cost of Electricity) to measure the cost performance of various electricity generating technologies is biased and is not inclusive enough, because, it only considers the capital, Operations and Maintenance, and fuel costs. Hence, snubbing crucial elements to business decision. Lastly, in the current literature, there is no a single sustainability assessment model that considers all the phases of electrical energy’s lifecycle. Considering these flaws, the novelty of this study is the development of a new, holistic theoretical sustainability assessment framework for power generation plants. The developed theoretical model includes 19 impact categories, 52 potential indictors, and 10 end points environmental, economic, and social aspects.

The move towards a new Circular Economy (CE) economic model has been advocated and supported in Portugal, however, there is limited research on this topic. To address this gap, a quantitative research based on an online survey was carried out among 99 Portuguese organizations, encompassing a wide range of sectors and sizes. The results show that CE is regarded as a strategic and relevant issue for profitability and value creation. Furthermore, the perception that it requires the adoption of new business models in addition to the classical “reduce, reuse, and recycle” approach is growing. Moreover, based on the hypotheses raised, results suggest that the level of CE adoption is positively impacted by the status of the EMS (Environmental Management System) certification and the willingness to improve the environmental performance and achieve a sustainable business model. However, CE activities are still relatively modest and a friendlier context (fiscal, legal, organizational, etc.) and the stronger support from supply chain agents and consumers are required. Future research should focus on how to design and shape the transition from a linear to a CE economy, and to ascertain if the positive attitude towards CE is materialized in changing the way business is done.

Streets are primary elements through which the character of urban neighborhoods are experienced and expressed. The “sense of safety” in neighborhood streets is paramount to social and psychological wellbeing of its residents and visitors. The intention of this study was to explore environmental and social cues of a neighborhood, which evoke fear of crime, which will help designers to prevent the generation of such negative feelings and promote more safe and comfortable spaces in our cities. This study used interviews, group discussions and observations to identify fear-generating factors with a sample of participants in the multi ethnic neighborhood of Kotahena in Colombo, Sri Lanka. Field data was analyzed through visual documentation and photographic surveys. Moreover, group discussions, interviews and personal observations were used to synergize the study objectives. The findings inform that fear of crime on streets is influenced by both environmental and social cues to varying degrees. Feelings of fear were associated with gender, ethnicity and less familiarity with the place as participants were from an ethnic minority within the community. Literature has emphasized that fear of crime has a connection to actual crime locations. The research findings, however, indicate that fear of crime spots identified by the residents do not have a direct relationship to the actual crime locations.

We tested the use of mosquito traps as an alternative to insecticide spraying in Camargue (France) following the significant impacts observed on the non-target fauna through Bti persistence and trophic perturbations. In a village of 600 inhabitants, 16 Techno-Bam traps emitting CO₂ and using octenol lures were set from April to November 2016. Trap performance was estimated at 70% overall based on mosquito landing on human baits in areas with and without traps. Reduction of Ochlerotatus caspius and Oc. detritus, the two species targeted by Bti spraying, was respectively 74 and 98%. Traps were less efficient against Anopheles hyrcanus (46%), which was more attracted by lactic-acid than octenol lures based on previous tests. Nearly 300 000 mosquitoes from nine species were captured, with large variations among traps, emphasizing that trap performance is also influenced by surrounding factors. Environmental impact, based on the proportion of non-target insects captured, was mostly limited to small chironomids attracted by street lights. Breeding success of a house martin colony was not significantly affected by trap use, in contrast to Bti spraying. Our experiment confirms that deployment of mosquito traps can offer a cost-effective alternative to Bti spraying for protecting local populations from mosquito nuisance in sensitive natural areas.

The Science-Sustainability poses an interdisciplinary paradox. On the one hand, the science for sustainability has increased in OECD economies in and in China as well as in the US in particular; on the other hand; the sustainability situation has worsened (Co2 emission has risen). On the face value, the adverse correlation shows a paradox. However, without explicating the science-sustainability relationship, it leads to a premature conclusion. In this study, we have drawn on three concrete questions for concrete answers. First, whether and how interdisciplinary sciences—energy science and environmental science—contribute to the sustainability. Second, whether and how the Sino-US inter-institutional analysis varies in the science-sustainability paradox. The empirical analysis from a panel data in the interdisciplinary and inter-institutional context show mixed patterns in three ways. First, the increase in the environmental science shows an improvement in the sustainability; the energy science shows a decline in the sustainability. Second, the Chinese environmental science has a comparative advantage to American environment science for the sustainability development, and the Chinese energy science has a comparative disadvantage to the US in the sustainability development. Third, the environmental science mediates the energy science in the science-sustainability relationships. Standing alone, the increase in the energy science harms sustainability; mediated by environmental science, it benefits sustainability. The study explains the adverse role of energy science in Jevons Paradox. The study also offers some policy paths for further research how capitalisms differently innovate, form strategies, and implement the practice.

The conversion of caatinga vegetation areas into pastures in the Brazilian semiarid region has depleted soil fertility due to degradation. The natural regeneration of the caatinga has been the alternative adopted to restore soil fertility. However, the real effectiveness of this practice in re-covering organic carbon (SOC) and nutrient stocks is unknown. This work evaluated the effect of natural regeneration of the caatinga vegetation on the restoration of levels and stocks of SOC, N, and P as a strategy to maintain the sustainability of the environment. We collected soil samples every 5 cm, up to 20 cm deep, in areas of degraded pasture, caatinga in regeneration (10 years), and regenerated caatinga (35 years) to evaluate the levels and stocks of SOC, N, and P. The depth sig-nificantly affects the levels and stocks of SOC, N, and P. Stocks and levels of SOC, N, and P were higher in regenerated caatinga > regenerating caatinga > degraded pasture. The regenerated caatinga increased SOC, N, and P stocks by 115%, 110%, and 117%, respectively, compared to the degraded pasture. Although 35 years of regeneration of the caatinga has improved soil fertility, the levels and stocks of SOC, N, and P remain low.

Generating electricity from coal combustion is highly associated with ongoing pollution problems that negatively impact the environment. Coal fly ash (CFA) is a predominant waste by-product of coal combustion which is disposed of in exposed ash dams constructed in the vicinity of power stations. Its disposal requires a large piece of land and therefore more land is converted to unproductive disposal sites, degrading the ecosystem. This waste material is classified as a hazardous substance in South Africa due to unacceptable levels of inorganic and persistent organic pollutants and its potential for dust creation. CFA is recycled and sold to the building and construction sectors, but the rate of its utilization is far less than the production rate resulting to high volumes that is stockpiled in disposal sites. More than 500 million tons CFA is produced yearly and over 200 million tons yearly remain unused globally and more CFA will continue to be produced due to high consumer energy demands, especially in countries with heavy reliance on coal for power generation. In this context, the paper discusses production of CFA, pollution problems due to its disposal, examines existing gaps within the scope of ash dam restoration processes and presents opportunities offered by phytoremediation (a low-cost and environmentally friendly technology that utilizes plants to restore the degraded environments). Ecological restoration through the use of socio-economically valuable plants (aromatic plants, legumes and grasses) has potential in addressing societal challenges and consequently impacting positively the livelihood of communities.

This study examines if enterprises’ digital transformation enhances their sustainable development capabilities and reduces carbon emissions, thus enhancing carbon neutrality performance and implementing the "dual-carbon" strategy. It specifically explores the impact of Chinese firms’ digital transformation on carbon neutrality performance in 30 provinces and municipalities in China from 2011 to 2021. Based on the Difference-in-Difference method and spatial econometric modeling, this study finds a U-shaped relationship between enterprise digital transformation and carbon performance, with spatial spillover effects. It also finds that converting environmental charges into taxes can significantly improve carbon performance. In terms of the mechanism of action, digital transformation affects carbon performance by influencing energy use efficiency and adjusting the level of industrial structure advancement and rationalization. In terms of heterogeneity, this U-shaped relationship exists only in the eastern and central regions, and the significance is more substantial in the east; in addition, the impact of enterprise digital transformation on carbon performance is more evident in regions with higher R&D intensity and higher economic development levels. These findings imply that the government should further encourage and guide enterprise digital transformation, monitor the effects of environmental protection policies and select and implement carbon emission reduction strategies according to local conditions to improve carbon performance.

Artisanal and Small-scale Gold Mining (ASGM) has caused several environmental impacts, resulting in significant siltation of water bodies due to the deposition of sediments on river banks. Based on this perspective, this study aims to investigate the water bodies and regions most impacted by mining activities, especially in relation to the increase in the Total Suspended Solids (TSS) caused by ASGM, focusing on the territories of Suriname and French Guiana, over the period from 2017 to 2023, through the creation of an algorithm in Google Earth Engine. The research also aims to map and describe active mining in this region using the Classification and Regression Tree (CART) method, which achieved an overall accuracy of 82% and a kappa index of 0.77. The results reveal that from 2017 to 2024 there was an increase of 148.09 km² of mining, with an average increase in TSS of up to 167 mg/l in water bodies most affected by mining activities. Finally, the continued importance of using remote sensing technologies, such as GEE, together with innovative methodological approaches, to monitor and manage natural resources in a sustainable manner is highlighted.

Unmanned aerial vehicles (UAVs, drones) are not just a technological achievement based on modern ideas of artificial intelligence; they also provide a sustainable solution for green technologies in logistics, transport and material handling. In particular, using battery-powered UAVs to transport products can significantly decrease energy and fuel expenses, reduce environmental pollution, and improve the efficiency of clean technologies through improved energy-saving efficiency. We consider the problem of maximizing the average environmental benefit of a fleet of drones given a periodic schedule of tasks performed by the fleet of vehicles. To solve the problem efficiently, we formulate it as an optimization problem on an infinite periodic graph and reduce it to a special type of parametric assignment problem. We exactly solve the problem under consideration in O(n³) time, where n is the number of tasks performed by vehicles.

This article touched upon various issues regarding vulnerability, disparities amongst community settings, and the effect of air pollution on the populace (low-income communities). Furthermore, the paper emphasized environmental ethics approaches like anthropocentric, nature-centric, and deep-ecological approaches. More so, it addresses the importance of handling these disparities, particularly from the geopolitical dimension, and recommends cross-border cooperation and accountability in promoting environmental justice in India.

This review paper presents a comprehensive synthesis of current knowledge on the contamination of water systems by polycyclic aromatic hydrocarbons (PAHs). PAHs, organic contaminants characterized by two or more fused aromatic rings, are notably problematic due to their persistence, bioaccumulation, and significant health risks. The review commences with an examination of various sources of PAHs in aquatic environments, encompassing both anthropogenic activities, such as industrial discharges, urban runoff, and oil spills, and natural phenomena including volcanic eruptions and wildfires. Subsequently, the discussion shifts to the distribution patterns of PAHs within different aquatic ecosystems, with an analysis of factors that influence their transport. Considerable focus is placed on the entry mechanisms of PAHs into water systems and their interactions with diverse environmental matrices. Additionally, the ecotoxicological effects of PAHs on aquatic life are scrutinized, with particular emphasis on molecular, individual, and ecosystemic impacts. This includes an exploration of PAH bioaccumulation in aquatic organisms and their potential mutagenic and carcinogenic consequences. The review further addresses the challenges associated with detecting and quantifying PAHs in aquatic settings, reflecting on the advancements in analytical methodologies and the complexities introduced by their varied physicochemical properties. The paper concludes with a summary of existing regulatory frameworks and guidelines governing PAH contamination in water systems, underscoring the imperative for global collaboration in the monitoring and management of PAH pollution.

The experience of ego dissolution and self-transcendence induced by psychedelic substances offers a profound challenge to our conventional understanding of the self and our relationship with the natural world. This paper delves into the philosophical underpinnings and implications of this phenomenon, exploring how the temporary breakdown of ego boundaries during a psychedelic experience may foster a sense of profound interconnectedness with nature. Drawing from Western and Eastern philosophical traditions, as well as recent insights from neuroscience and consciousness studies, we examine the potential of psychedelic-induced self-transcendence to catalyze a shift in our perspectives on the human-nature relationship. The paper investigates the philosophical implications of this experience, including its resonance with deep ecological philosophies and its potential to inspire more ecocentric ethical frameworks. Furthermore, we explore the possible practical implications of fostering a sense of ecological connectedness through psychedelics, such as promoting environmentally sustainable behaviors and addressing the pressing challenges of climate change and ecological degradation. Ultimately, this exploration highlights the value of engaging with altered states of consciousness as a means to reconsider our place within the intricate web of life on Earth.

Esterquats constitute a unique group of quaternary ammonium salts (QASs) that contain an ester bond in the structure of the cation. Despite the numerous advantages of this class of compounds, only two mini-reviews discuss the subject of esterquats: the first one (2007) briefly summarizes their types, synthesis, and structural elements required for a beneficial environmental profile and only briefly covers their applications whereas the second one only reviews the stability of selected betaine-type esterquats in aqueous solutions. The rationale for writing this review is to critically reevaluate the relevant literature and provide others with a “state-of-the-art” snapshot of choline-type esterquats and betaine-type esterquats. Hence, the first part of this survey thoroughly summarizes the most important scientific reports demonstrating effective synthesis routes leading to the formation of both types of esterquats. In the second section, the susceptibility of esterquats to hydrolysis is explained, and the influence of various factors, such as the pH, the degree of salinity or the temperature of the solution, was subjected to thorough analysis that includes quantitative components. The next two sections refer to various aspects associated with the ecotoxicity of esterquats. Consequently, their biodegradation and toxic effects on microorganisms are extensively analyzed as crucial factors that can affect their commercialization. Then, the reported applications of esterquats are briefly discussed, including functionalization of macromolecules, such as cotton fabric as well as their successful utilization on a commercial scale. The last section demonstrates the most essential conclusions and reported drawbacks that allow us to elucidate future recommendations regarding the development of these promising chemicals.

This paper presents a theoretical framework aimed at improving IoT network cybersecurity by AI-driven anomaly detection in the context of rapid urbanization and the development of smart cities. The framework draws upon the Complex Adaptive Systems Theory, Theory of Planned Behavior, the Technology Acceptance Model, and the Socio-Technical Systems Theory, and intri-cately examines how AI might be integrated into the intricate ecosystem of smart cities to detect and mitigate cyber threats. It emphasizes AI-driven anomaly detection methods as pivotal in-struments that impact cybersecurity enhancement in smart city infrastructures. The proposed framework also highlights the crucial role that human-related factors, including user behavior and adoption, play in determining how effective AI applications are in enhancing cybersecurity in smart cities. It also recognizes the important moderating roles played by outside factors like legislative frameworks, environmental contexts, and technological breakthroughs in the relationship between AI-enabled anomaly detection and enhanced cybersecurity. The goal of this research is to shed light on the interactions between technology and socio-technical dynamics by offering a thorough theoretical understanding of AI's potential in smart city cybersecurity. It highlights the significance of taking into account a variety of contextual aspects when employing AI to strengthen the digital security of urban areas, and provides a strategic direction for future research and practical implementation.

Recent research has specifically targeted the decision-making process of eco-friendly individuals, emphasizing the significance of recycling and its impact on sustainability. Our study extends this inquiry by examining the correlation between recycling participation and pro-environmental behavior among consumers, integrating the concepts of self-efficacy, feelings of pride, and social pressure into our analysis. Utilizing Partial Least Squares-Structural Equation Modeling (PLS-SEM), we aimed to explore the intricate relationships that underpin these behaviors. Results suggest that self-efficacy and feelings of pride significantly influence individuals' recycling behaviors, highlighting the role of psychological and social factors in promoting environmental sustainability. Interestingly, it was concluded that social pressure did not have the expected moderating effect on increasing consumers' feelings of pride and self-efficacy toward recycling activities.This study not only sheds light on the underlying mechanisms that drive pro-environmental actions but also contributes to understanding sustainability promotion through recycling and offers insights for policymakers and environmental advocates to foster environmental responsibility and behavior change.

In the former mining district of La Carolina (southern Spain), waste materials were accumulated without first waterproofing the substrate. Additionally, these mining dams were abandoned without any type of restoration, conditions that present a significant risk of contaminating the surrounding soils and waters. Prior to carry out the necessary works for isolating these residues, morphological characterization of the contact with the base substrate is needed. For that purpose, in recent years, different indirect study techniques have been used, among which electrical to-mography stands out. In this work, a less common geophysical technique, magnetometry, both in its magnetic and gra-diometric modalities, is used as an alternative method to analyse the geometry and structure of a mining dam. The results obtained with this methodology are compared with the results provided by electrical techniques, as well as with direct data from mechanical surveys and aerial photo-graphs prior to waste deposition. The magnetic anomaly curves obtained with geometric models generated with the Mag2dc program were also analysed. This comparative study shows the use-fulness of magnetic prospecting in characterizing the base geometry of these mining structures and therefore the interest in its application to environmental characterization studies.

Keywords: conservation; cultural pluralism; environmental regulation; community-based natural resource management; Indigenous law

Keywords: Biomass pyrolysis, Chemical Looping Combustion, Life Cycle Assessment, Environmental Impacts, Carbon Footprint.

The field of fluorescence sensing, leveraging various supramolecular self-assembled architectures constructed from macrocyclic pillar[n]arenes, has seen significant advancement in recent decades. This review comprehensively discusses, for the first time, the recent innovations in the synthesis and self-assembly of pillar[n]arene-based supramolecular architectures (PSAs) containing metal coordination sites, along with their practical applications and prospects in fluorescence sensing. Integrating hydrophobic and electron-rich cavities of pillar[n]arenes into these supramolecular structures endow the entire system with self-assembly behavior and stimulus responsiveness. Employing the host–guest interaction strategy coupled with complementary coordination forces, PSAs exhibiting both intelligent and controllable properties are successfully constructed. This provides a broad horizon for advancing fluorescence sensors capable of detecting environmental pollutants. This review aims to establish a solid foundation for the future development of fluorescence sensing applications utilizing PSAs. Additionally, current challenges and future perspectives in this field are discussed.

Background: Waterborne diseases pose a significant global public health threat, compelling enhanced comprehensive surveillance. This study investigates the current infectious disease and antimicrobial resistance (AMR) surveillance systems, including wastewater and environmental surveillance (WES), in three sub-Saharan African countries: Tanzania, Burkina Faso, and the Democratic Republic of the Congo (DRC). The three countries have their specificities regarding wastewater networks and logistic systems. So, emphasizing the need to strengthen existing disease surveillance, the paper advocates for incorporating WES systems specifically designed for countries' context to monitor waterborne and re-emerging pathogens, as well as AMR.Methods: National workshops were conducted to assess the current clinical and environmental surveillance systems and identify priority pathogens for new environmental monitoring. Data were collected through surveys from experts in academia, research, policy, and healthcare. Results: Prioritized pathogens for WES include waterborne (poliovirus, Salmonella Typhi, Vibrio cholerae), respiratory (influenza A&B, SARS-CoV-2), other (Measles and Rubella, Mycobacterium tuberculosis). Recommended AMR pathogens include drug-resistant Mycobacterium tuberculosis, Salmonella spp., methicillin-resistant Staphylococcus aureus, and extended-spectrum beta-lactamase and carbapenemase-producing E. coli. Tanzania, Burkina Faso, and the DRC employ DHSI2-based centralized electronic systems for clinical data collection, complemented by Excel and paper-based registries. The WES approach is commonly employed for monitoring poliovirus and rarely for AMR and other pathogens. Discussion and conclusions: WES is a valuable tool for early detection of locally circulating human-derived pathogens, aiding in outbreak detection, data-driven epidemic response, and prevention. The availability of WES results underscores the importance of effective sanitation for safeguarding human, animal, and environmental health. WES is a pivotal tool for integrated risk management, preventing waterborne outbreaks, protecting drinking water sources, and ultimately gaining various UN Sustainable Development Goals. The study highlights the importance of customized WES systems in line with each country's context, emphasizing localized approaches for effective monitoring of waterborne pathogens and AMR.

Fire blight, caused by the plant-pathogenic bacterium Erwinia amylovora, is a highly contagious and difficult-to-control disease due to the efficient dissemination, survival, and scarcity of effective control methods. Copper and antibiotics are the most used treatments but pose environmental and human health risks. Bacteriophages (phages) constitute an ecological, safe, and sustainable fire blight control alternative. The goal of this study was to search for specific E. amylovora phages from plant material, soil, and water samples in Mediterranean environments. A collection of phages able to specifically infect and lyse E. amylovora strains was generated from former fire blight-affected orchards in Eastern Spain. Following in vitro characterization, assays on immature fruit revealed that preventively applying some of the phages or their combinations delayed the onset of fire blight symptoms and reduced the disease severity, suggesting their biocontrol potential in Spain and other countries. Morphological and molecular characterization of the selected E. amylovora phages classified them as members of the class Caudoviricetes (former Myoviridae family) and genus Kolesnikvirus. This study reveals Mediterranean settings as plausible sources of E. amylovora-specific bacteriophages, and provides the first effective European phage cocktails in plant material for the development of sustainable fire blight management measures.

In the face of pressing global challenges, coupling the synergy of dance arts, sustainability, and marketing communications emerges as a potent catalyst for advancing sustainable behavior within society. Although prior research has examined the emotional stimulations raised by dance performance, it has not systematically demonstrated the role of traditional dance as a vehicle for sustainability marketing communications. This study fills this gap by using the AIDA model (Attention, Interest, Desire, Action) as a foundation, conceptualizing dance performance elements into seven dimensions, and incorporating emotional engagement and environmental consciousness to foster sustainable behavior. Collaborating with Taiwanese dance troupe, the research produced a performance titled, ‘The New Dragon Palace Chronicle’, which focuses on the themes of destruction and preservation of underwater life, enriched with cultural and sustainability symbolism. The hypothesis were tested on a sample of 315 Taiwanese audience who watching the performance. The results confirmed that the seven dimensions of the dance elements have substantial validity and reliability, significantly drawing the attention of the audience as preliminary stage of awareness. This attention fosters emotional engagement and amplified environmental consciousness and significantly influences interest, desire, and ultimately, sustainable behavior action. The findings underscore the vital role of dance art performance in nurturing actions that contribute to social sustainability.

This paper explores the intricate world of microbial life, focusing on biofilm as a dynamic consortium of bacteria forming complex networks within a self-produced matrix of extracellular polymeric substances (EPS). Analogous to a bacterial house, these structures provide both shelter and support, playing a pivotal role in the microbial realm with dual effects on human and environmental contexts. Biofilm's significance extends beyond its microcosmic architecture, positively contributing to heavy metal removal, electricity generation through microbial fuel cells, and structural remediation, while also posing threats with detrimental formations implicated in conditions from lung to urinary tract infections. Control of biofilm becomes imperative to unlock its positive attributes and mitigate potential negatives, serving as a cornerstone for environmental remediation, sustainable energy, and infrastructure maintenance. Employing a comprehensive bibliographic approach, this study identifies keywords, countries, and organizations influencing biofilm research, proposing innovative avenues like machine learning for future exploration. The aim is not only to contribute to existing knowledge but to pioneer cutting-edge strategies for biofilm optimization and challenge mitigation, shaping its trajectory towards sustainable applications across diverse fields.

The possible future emergence of new SARS-CoV-2 virus variants pushes the development of new chemoprophylaxis protocols complementary to the unspecific and specific immune-prophylaxis measures currently used. The SARS-CoV-2 virus is particularly sensitive to oxidation due to the relevant positive electrical charge of its spike protein used as a ligand for target cells. The present study evaluated the safety and efficacy of a new oxidant preparation, liquid hyperoxygen (IOL), to neutralize the SARS-CoV-2 virus. IOL was incubated with throat swabs containing a human wild-type virus. The samples were then incubated with cells expressing the ACE2 receptor and therefore very sensitive to SARS-CoV-2 infection. The ability to neutralize SARS-CoV-2 was determined by assessing the amount of viral nucleic acid inside cells by PCR. The results obtained indicate that IOL, even at considerable dilutions, is capable, after incubation times of less than 30 min and even equal to 5 min, to completely inhibit SARS-CoV-2 infection. This inhibitory effect has been shown to be due to the oxidizing capacity of the IOL. This oxidizing capacity is exerted towards the virus but does not damage eukaryotic cells either in the in vitro or in the in vivo skin model. Obtained results indicate that the use of IOL, a hydrophilic liquid mixture saturated with highly reactive oxygen and nitrogen species, is a new powerful, safe, and effective tool for preventing possible future outbreaks of COVID-19 disease.

In Mexico, the evaluations of environmental flows are regulated by the Mexican Norm NMX-AA-159-SCFI-2012 and they warrant the establishment of water reserves for the environment. Yet, the pressure for water use limits the establishment of said reserves. This research aimed to evaluate the changes through time of the variables that serve as a basis for the implementation strategy by the Mexican government. A geographical information system was built with updated variables, the desired conservation status was analyzed, and the potential reserves were estimated based on the reference values for all basins nationwide. The results were examined according to their historical, current, and potential contribution to the conservation of natural protected areas and their connectivity. The outcomes point towards an administrative implementation strategy with positive outcomes despite the growing pressure for water use, with a change rate higher than the one for the creation of new protected areas. Currently, basins with low pressure and high conservation value have the potential to contribute to 86–88% of the goal set by the present administration without affecting water availability. Finally, reserving water in the priority basins would guarantee the legal protection of the flow regime in 48–50% of the hydrographic network in a desired conservation status, 45–49% of wetlands of international importance, and other natural protected areas in 85–89% of the global ecoregions represented in Mexico.

Orchids are among the plants most threatened by anthropic impact and environmental changes. Therefore, all known orchid species are protected in several countries by regional, national and international legislation. Several studies cast doubts on the effectiveness of legislation to ensure protection of wild orchids. We assessed the vitality of four orchid populations in a coastal area in Northern Italy, by monitoring vegetative and reproductive traits of orchid populations growing both in protected sites comprised in the Natura 2000 network and in non-protected sites. We also monitored the level of environmental threat to orchid vitality. Early flowering deceptive species (Ophrys sphegodes and Anacamptis morio) exhibited high vegetative vitality and experienced similar levels of environmental threat in protected and non-protected areas. However, their reproductive success was strongly jeopardized probably by failed pollination that impeded fruit set. Late-flowering, partially or totally rewarding species (Anacamptis pyramidalis and Anacamptis coriophora) were more strongly impacted by spring mowing, ungulate herbivory and alien species. Only for A. coriophora were herbivory and alien species invasion lower at protected vs. non-protected sites which ensured higher population vitality at protected sites. We conclude that environmental protection is ineffective for preserving orchids without targeted actions against specific environmental threats.

Ecological stoichiometry is an important index to reflect ecological interaction and the balance of various elements in ecological processes. At present, the stoichiometric spatial distribution of soil carbon (C), nitrogen (N), phosphorus (P) and potassium (K) in farmland and grassland of Inner Mongolia and its influencing factors are still unclear. In this study, the spatial distribution of soil nutrient content and stoichiometry and the effects of environmental factors on soil C:N:P:K stoichiometry were analyzed under different land use patterns in four agro-pastoral areas. The results showed that there was a geographical gradient in the ecological stoichiometric relationship between farmland and grassland. RCN, RCP, RCK, RNP and RNK showed an "N" distribution from west to east, while RPK showed a "V" distribution. The difference in spatial distribution was more significant than the difference in land use pattern. The ecological stoichiometric relationship of grassland was mainly affected by the content of C and N, and was related to the similarity of soil properties. The field ecological stoichiometry was mainly affected by the content of nitrogen and phosphorus, and had a great relationship with fertilization. The effects of MAT and MAP on soil ecological stoichiometry were related to the inter-regional environmental heterogeneity. The influence of MAP on farmland and MAT on grassland was more significant. It was of great significance for field management according to local conditions, rational utilization of land resources and sustainable development of agriculture to clarify the ecological stoichiometric characteristics of farmland and grassland in agro-pastoral ecotone.

This research review paper comprehensively assesses the environmental impacts of diverse energy sources and proposes sustainable solutions. Fossil fuels contribute to pollution, habitat destruction, and greenhouse gas emissions. Renewable energy offers cleaner alternatives but faces challenges in manufacturing and disposal. Nuclear power has low emissions but poses risks in waste management and radiation. Biomass can be sustainable if responsibly sourced, but unsustainable practices lead to deforestation and emissions. Solutions include renewable technologies, energy efficiency, carbon capture, and sustainable transportation. Effective policies, incentives, and individual actions are crucial for a greener future. This review highlights the urgency of addressing energy-related environmental impacts and offers valuable insights for policymakers and individuals to take decisive actions for a sustainable energy future that protects the environment and promotes well- being.

This study conducts a comprehensive analysis of the presence of heavy metals, including zinc (Zn), lead (Pb), copper (Cu), chromium (Cr), and arsenic (As), in the dust found inside educational buildings and the top layer of soil in different areas of Vilnius. The study focuses on the analysis of topsoil samples gathered between 2011 and 2023, with a specific emphasis on dust samples obtained from 24 schools in 2022. The research reveals significant variations in the concentrations of heavy metals, providing a clear understanding of the complex relationship between sources of urban pollution, environmental processes, and the correlation between soil and dust contamination by heavy metals. Indoor dust in schools shows unique contamination patterns in contrast to topsoil, suggesting distinctive sources of indoor pollution, while there are some general similarities. This finding emphasizes similarities and distinctions between soil and dust in educational environments. The study utilizes advanced statistical methods such as Pearson correlation, Principal Component Analysis (PCA), and hierarchical clustering to examine the distribution and characteristics of these metals. This study distinguishes itself by examining indoor dust in educational facilities and topsoil in Vilnius, providing crucial insights into the relationship between these two environmental matrices.

The study aimed to investigate the effect of climate change exposure on affect and pro-environmental behavioural intentions in a randomised controlled trial. An online survey was completed by 100 adult participants and included measures of affect and pro-environmental behavioural intentions pre- and post-exposure. Participants were randomly allocated to a group that saw a climate change video (n=55) or a group that saw a non-climate change video (n=45). The findings showed were that participants in the climate change group showed a significant increase in negative affect and pro-environmental behavioural intention scores post-video exposure compared to the non-climate change video group. This suggests that climate change video exposure negatively influences affect but also potentially increases the intention to act pro-environmentally. These findings have the potential to support policies and societal change, however further investigation into the type of contents, actual behaviour change, and impacts on diverse populations (e.g., minority groups) is needed that influences pro-environmental behaviours is required. Furthermore, to achieve a greater impact, future research should be conducted measuring actual pro-environmental behaviour change, including with those from diverse populations.

There are four categories of medical waste that cannot be mixed as this will cause serious problems such as environmental pollution or infection. In the past, the classification of medical waste often involved a lot of human and material resources to process, with workers at risk of exposure to infectious substances. Therefore, an augmented reality (AR) and artificial intelligence (AI) medical waste classification system and method were developed. This innovative medical waste classification system and method combines AR and AI identification technology to reduce the risk of manual judgment errors by clinical staff when handling medical waste.

In recent years, change in behaviour towards the environment has gained prominence as a policy tool to influence positive environmental value. Simultaneously, the role played by social identity in promoting pro-environmental action is gaining recognition. Within this work, the intersection between collective group identity and environmental behaviour has received very little attention. Group norms are considered a strong predictor of pro-environmental behaviour, yet the influence of social identity and collective action on environmental action has not been adequately investigated in a multi-ethnic setting. Within this context, this study examines the affective component of social identity influence on pro-environmental action. More succinctly, this study demonstrates how outgroups and in-groups’ relations and broader socio-cultural structures, values, interest, and norms impact environmental and sustainability transitions behaviours. Through interviews with participants across the four dominant social groups in South Africa, this study provides compelling evidence that country wide expressions of social identity and in-group dynamics shapes the individual behaviour regarding environmental and sustainability concerns and further strengthen the individual’s perspective for social environmental transformation. This study advances the need for a social-identity centred approach to foster pro-environmental and sustainability outcomes.

The brick manufacturing sector in Bangladesh is experiencing rapid growth, leading to notable environmental and health concerns. The primary objective of this research is to examine the Savar Upazila, a region of significant economic significance owing to its favorable brick manufacturing conditions and proximity to Dhaka city. Brick kilns, among other sources, constitute significant contributors to air pollution. The study utilized primary and secondary data to examine brick kiln emissions' effects on the surrounding area's environment and public health. The collection of primary data was conducted in multiple zones within Savar Upazila, which is home to a significant number of brick kilns. The utilization of secondary data provided valuable insights regarding the toxic pollutants discharged by these kilns and the corresponding health risks they pose. The participants provided accounts of various health ailments, such as dermatological conditions, optical difficulty, and respiratory complications, further aggravated by brick kilns' incidents. The prevalence of crop losses, soil degradation, and reduced agricultural yields was confirmed by 74% of the respondents. The trees and crops in the surrounding area experienced adverse effects due to the deposition of dust particles. During periods of inactivity, the concentrations of sulfur oxide (SOx) were between 6 and 9 times lower compared to periods of operation. Similarly, nitrogen oxide (NOx) levels were observed to be 4 to 6 times lower during non-operational phases. The degradation of water quality in adjacent bodies has been attributed to the deposition of dust and ash originating from brickfields, resulting in substantial repercussions on aquaculture. A significant proportion of participants indicated experiencing diverse health issues, notwithstanding the employment prospects generated by brick kilns, thereby underscoring the adverse consequences on both the environment and the local economy.

The measures related to climate change and international technology transfer have been closely intervened as most international environmental instruments, including the United Nations Framework Convention on Climate Change and Kyoto Protocol as well as Paris Agreement which contain the provisions concerning environmentally friendly technology transfer. However, technologies have not been transferred adequately owing to the flaws in the relevant provisions and due to the fact that most technologies are possessed by transnational corporations and other private sectors. In order to undertake the commitment by the governments of developed countries and at the same time, to conform the commercial activities of their respective private sectors to the level of promised international obligation, an uniform international technology transfer agreement needs to be established separately, particularly under the World Trade Organization regime in Post Pairs-Agreement era. This paper first explores the defects and challenges found in provisions related to technology transfer in existing environmental agreements, and examines the possibilities of concluding an international technology transfer agreement both from theoretical and practical perspectives. climate change;environmentally sound technology;international technology transfer;Post Paris-Agreement Era

Powder metallurgy is a preferred manufacturing method in various industries because it offers design flexibility, material efficiency and a cost-effective production. In this work, we study the effects of different compaction directions on the strength of parts produced by powder metallurgy. Al–4wt.%Cu alloys are used due to their recyclability, and three distinctive compaction pressures are applied, resulting in two sample groups. One group is air-cooled after sintering, while the other is water-quenched and naturally aged (T4 temper). Both the compressive and tensile strengths are measured and analyzed. The study reveals that both heat treatments and compaction directions significantly influence anisotropic strengths. The novelty of this research lies in the use of powders that can be reused from machining, turning, or foundry rejection. By omitting or reducing the melting stage and employing simple powder metallurgy, the cost-effective and environmentally friendly processes are achieved. The planning of compaction load, compaction direction, and heat treatments is found to play a crucial role in determining the final mechanical performance. Notably, this approach aligns with the environmental, social and governance (ESG) practices that have been increasingly adopted by industry.

Interior designers play a pivotal role in shaping the built environment and catalyzing positive change through the adoption of sustainable design practices. This study centers on the analysis of prevailing attitudes held by interior designers in Jordan towards sustainable interior design practices. Through a comprehensive methodology involving a literature review and a three-part questionnaire, the research explores the benefits, challenges, and integration of sustainability principles. The study highlights substantial awareness (85%) of sustainable interior design's environmental impact and resource preservation. Additionally, 81% acknowledge its enduring significance, and 89% recognize its diverse benefits. While 61% exhibit familiarity, 27% claim professional experience. Among sustainability indicators, energy efficiency scores 4.25, resource efficiency 4.27, and "Design aligns with laws and regulations by the Ministry of Labor" ranks highest at 4.37. This study significantly augments our understanding of sustainable interior design by introducing a comprehensive evaluation framework that encompasses the three sustainability dimensions. It equips decision-makers with a robust tool to identify specific practices that bolster sustainability performance, further advancing the field.

The use of bioethanol in cooking is not new, but until recently its application has been confined exclusively to small scale projects. However, a new bioethanol cooking utility in Kenya has now reached mass market adoption, serving more than 950,000 households with cooking fuel since launching in late 2019. Its success was made possible by a significant investment in technology to facilitate safe, convenient and affordable fuel distribution. It is funded by climate finance which is based on bioethanol fuel replacing charcoal used for cooking, a leading cause of African defor-estation. This development has been so recent that it has not widely been discussed in the academic literature. More broadly, the health, environmental and economic impacts of bioethanol for cooking have not been systematically assembled in one place. This article details what is known about the impact of bioethanol for cooking, how and why bioethanol for cooking was able to suddenly reach commercially viable scale in spite of the challenges it faced. It also discusses implications for further scaling of clean cooking fuel solutions.

Chronic heat stress (CHS) has been exerting great pressure on the poultry industry due to the global warming. CHS-induced negative impacts deeply change the physiology, metabolism, egg production and meat quality of ducks. To reduce the increasing economic loss, different environmental strategies have been adopted. Here, we comprehensively compared three rearing modes for Cherry-Valley ducks (CVds) mainly by changing the environmental temperature. Plus, the transcriptome analysis and physiological anatomy were implied to investigate the underlying molecular biology and pneumonocyte dynamics. It turns out that the CVds affected by CHS have poor growth performance and bad carcass traits. In addition, the irreversible damage caused by CHS in the lung tissue of CVds was observed. Furthermore, several potential genes related to CHS have been found, such as HSPA8, IGF1, FGFR1, ACSL3, ACSL6, NR1H3 and GAPDH. This study strongly indicates the severe injury of CHS from the high-temperature environment and points out one of the adopting directions for duck rearing.

Sustainable supply chains have become increasingly crucial to address environmental and social challenges faced by societies worldwide. Last-mile delivery, which involves delivering products from a distribution center or warehouse to the final destination, typically a consumer's doorstep, is an essential component of the supply chain. However, it faces numerous challenges such as traffic congestion, air and noise pollution, and carbon emissions. This research paper explores the viability of last-mile delivery solutions for sustainable supply chains. The study reviews the literature on last-mile delivery challenges, sustainable last-mile delivery solutions, and case studies of sustainable last-mile delivery solutions. The results indicate that innovative last-mile delivery solutions, such as electric vehicles, cargo bikes, and drones, have the potential to reduce environmental impact and improve the efficiency of last-mile delivery while enhancing social equity. Additionally, partnerships between different stakeholders, including governments, logistics companies, and consumers, can contribute to the development of sustainable last-mile delivery solutions. The study concludes that sustainable last-mile delivery solutions are essential to achieving sustainable supply chains and recommends further research to explore the economic feasibility and scalability of these solutions.

Extreme heat is a climate, public health, and environmental justice issue. This case study examined public transit exposure and vulnerability to extreme heat by investigating the microenvironment, land cover characteristics, and social vulnerability of heat-vulnerable bus stops in Knoxville, Tennessee. The community’s temperature and Heat Index information, bus stop point data, land cover characteristics data, and the microenvironment of bus stops (i.e., trees and shelters) were processed and mapped with ArcGIS Pro. The pictures of the microenvironment of the bus stop were collected from Google Maps, and the social vulnerability of the area where the bus stops are located was investigated by analyzing the Center for Disease and Prevention's Social Vulnerability Index. Results found that the most heat-vulnerable bus stops were concentrated in West Knoxville, South, North, Northeast, and Northwest Knoxville. In addition, the most heat-vulnerable bus stops were concentrated in commercial complexes and areas a large number of systematically marginalized populations reside.

Children five years or younger in low- and middle-income countries (LMICs) are severely affected by diarrhoea disease, especially in the sub-Saharan region. Hence, the study aimed at determining the prevalence and determinants of diarrhea disease among children under 5 years in Epworth Township, Zimbabwe. A descriptive cross-sectional study was conducted at a local clinic in Epworth Township, Harare. A convenience sampling strategy was used to recruit study participants for participation and 386 children were enrolled in the study. The majority were male children (n=229; 59.3%), while there were more female caregivers (n=370; 95.9%) than male caregivers (n=16; 4.1%). The prevalence of diarrhea disease in the study was 25.1%. The determinants associated with diarrhea were being partially vaccinated (OR 2.38, CI 95% 2.80–8.22), collecting water more than 1 kilometre from a household (OR 4.55; CI 95% 2.10–9.85) and using untreated water (OR 6.22; CI 95% 2.13–18.20). The age of the caregiver and using a clean water container (OR 0.05; p=0.020) were protective factors. Provision of primary health care, especially prevention of disease through immunization and rendering environmental health services could reduce the prevalence of diarrhea in disadvantaged townships.

Transdermal drug delivery (TDD) is one of the key approaches for treating diseases, avoiding first-pass effects, reducing systemic adverse drug reactions and improving patient compliance. Microneedling, iontophoresis, electroporation, laser ablation and ultrasound facilitation are often used to improve the efficiency of TDD. Among them, microneedling is a relatively simple and efficient means of drug delivery. Microneedles usually consist of micron-sized needles (50-900 μm in length) in arrays that can successfully penetrate the stratum corneum and deliver drugs in a minimally invasive manner below the stratum corneum without touching the blood vessels and nerves in the dermis, improving patient compliance. Hydrogel-forming microneedles (HFMNs) are safe, non-toxic, no residual matrix material, high drug loading capacity, controlled drug release and are suitable for long-term, multiple drug delivery. This work reviewed the characteristics of skin structure and transdermal drug delivery; introduced TDD strategies based on hydrogel microneedles; summarised the characteristics of HFMNs TDD systems and the evaluation methods of HFMNs; and the application of HFMNs drug delivery systems in disease treatment. The HFMNs drug delivery system has a wide scope for development, but the translation to clinical application still has more challenges.

Environmental regulation has dual effects on water resource utilization performance through various channels such as the "three red lines" and the "Porter hypothesis". Based on the detailed analysis of the impact path of environmental regulation on water resource utilization performance, the two-step system GMM method was adopted to test the dual effects of environmental regulation on water resource utilization performance by using panel data of 30 provinces and cities from 2004 to 2020. The results show that: (1) Environmental regulation has a significant direct impact on water resource utilization performance, and is currently in the stage of positive relationship of an inverted u-shaped relationship. (2) Environmental regulation has a significant indirect impact on water resource utilization Environmental regulation has dual effects on water resource utilization performance through various channels such as the "three-red lines" and the "Porter hypothesis". In accordance with a detailed examination of the influence path of environmental regulation on the performance of water resource utilization, the double effects of environmental regulation on water resource utilization performance were examined using panel statistics from 30 provinces and cities from 2004 to 2020 using the two-step system GMM approach. The results demonstrate that: (1) Environmental regulation has a direct effect on water resource utilization performance which is currently in the stage of the positive relationship of an inverted u-shaped relationship. (2) The influence of environmental regulation on water resource utilization performance through government intervention and industrial structure adjustment is indirect, among which government intervention can significantly improve water resource utilization performance, while the growth of the tertiary industry as a percentage can lower water resource utilization performance. (3) Both direct and indirect impacts indicate that enhancing the efficiency of the use of water resources is sustainable, and the water resource utilization performance of the preceding period had a major positive impact over the present phase. Therefore, the paper sets out a few policy suggestions, such as choosing reasonable environmental regulation tools, actively guiding the market-oriented reform with constraints, and upgrading the industrial structure in a green way.

Groundwater plays a crucial role in triggering and reactivating deep-seated landslides. However, classical hydrogeological investigations have limitations in their applicability to deep-seated landslides due to anisotropic and heterogeneous media[16]. The Huangtupo landslide in the Three Gorges reservoir area has garnered significant attention in China due to its large volume, complex geological structure, and high hazard potential. Recent monitoring data has shown notable deformation in the NO.1 Riverside Sliding Mass (HTP-1), one of the four parts of the Huangtupo landslide, making it the primary focus of landslide research. This study aimed to investigate the water sources in the HTP-1 landslide using environmental stable isotopes as tracers. The isotopic analysis results indicated that the groundwater in the landslide area (LGW) is a mixture of remote karst groundwater (KGW) from the adjacent up-slope and local precipitation (LP). The karst groundwater is a major contributor to the recharge of the landslide groundwater system, causing a high slope groundwater level that can easily exceed the critical level during heavy rainfall events. Furthermore, based on the differential distribution of the LP fraction of LGW at different locations, the groundwater in the landslide can be classified into three groups. Groundwater at the sliding rupture surface has the highest fractions of local precipitation, followed by the groundwater at the rear of the landslide. Combined with the monitoring data of groundwater level in boreholes during the rainy season, this indicates that fissures and fractures in the sliding rupture zone and at the back of the landslide are well connected, which could be a critical factor in the mass movement of the creeping slope.

“Sustainable development” (SD) is a term that has gained prominence in the international dia-logue around development. Many, however, continue to misunderstand the concept, its principles, its development, and its operationalization. The wide variety of definitions and interpretations of SD lean toward institutional and social prerogatives rather than unifying the essence of the con-cept, which is rooted in conventional ideas and values. By delving deeper into the paradigm, its history, and its potential, this research sought to contribute to ongoing discussions about sus-tainable development. The literature was thoroughly analyzed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020. This historical and conceptual analysis sought to update the body of knowledge on sustainability and sustainable development by examining the metaphorical and epistemological underpinnings of SD’s various definitions, evolutions, and principles. The research concludes and argues that intergenerational justice, based on the environment, economy, and society, is the central tenet of the entire sustainable develop-ment argument. The focus and consideration of interested parties are moving from the protection of the environment to social sustainability. The future of SD is likely to continue to focus much more on the social pillar and integrate digitalization in implementing the SD concept, especially in the fourth industrial revolution. To promote ethical human behavior and activities worldwide, at national and local levels, decision-makers must be continuously cognizant of the interdepend-encies, direct interactions, and balance between the three core constructs of SD.

Background: Multidrug-resistant bacteria present resistance mechanisms against β-lactam antibiotics, such as Extended-Spectrum Beta-lactamases (ESBL) and Metallo-β-lactamases enzymes (MBLs) operon encoded in Gram-negative species. Likewise, Gram-positive bacteria have evolved other mechanisms through mec genes, which encode modified penicillin-binding proteins (PBP2). This study aimed to determine the presence and spread of β-lactam antibiotic resistance genes and the microbiome circulating in Quito’s Public Transport (QTP). Methods: A total of 29 station turnstiles were swabbed to extract the surface environmental DNA. PCRs were performed to detect the presence of 13 antibiotic resistance genes and to identify 16S rDNA barcoding, followed by clone analysis, Sanger sequencing and BLAST search. Results: ESBL genes blaTEM-1 and blaCTX-M-1 and MBL genes blaOXA-181 and mecA were detected along QPT stations. Two subvariants were found for blaTEM-1, blaCTX-M-1, and blaOXA-181. Almost half of the circulating bacteria found at QPT stations were common human microbiota species including those classified by the WHO as pathogens of critical and high-priority surveillance. Conclusions: β-lactam antibiotic resistance genes are widely spread throughout QPT. This is the first report of blaOXA-181 in environmental samples in Ecuador. Moreover, we detected a new putative variant of this gene. Some commensal coagulase-negative bacteria may have a role as mecA resistance reservoirs

The current COVID19 pandemic has raised huge concerns for outdoor air quality due to expected lungs deterioration. These concerns include the challenges in the scalable prediction of harmful gases like carbon dioxide, iterative/repetitive inhaling due to mask and environmental temperature harshness. Even in the presence of air quality sensing devices, these challenges lead to failed planning and strategy against respiratory diseases, epidemics, and pandemics in severe cases. In this work, a dual time-series with bi-cluster sensor data-stream-based novel optimized regression algorithm was proposed with optimization predictors and optimization responses that use automated iterative optimization of the model based on the similarity coefficient index. The algorithm was implemented over SeReNoV2 sensor nodes data, i.e. multi-variate dual time-series of environmental and US Environmental Protection Agency standard sensor variables for air quality index measured from air quality sensors with geospatial profiling. The SeReNoV2 systems were placed at four locations that were 3 km apart to monitor air quality and their data was collected at Ubidots IoT platform over GSM. Results have shown that the proposed technique achieved a root mean square error (RMSE) of 1.0042 with a training time of 469.28 seconds for normal and RMSE of 1.646 in the training time of 28.53 seconds for optimization. The estimated R-Squared error of 0.03 with Mean-Square Error for temperature 1.0084 ᵒC and 293.98 ppm for CO2 was observed. Furthermore, the Mean-Absolute Error (MAE) for temperature 0.66226 ᵒC and 10.252 ppm for CO2 at a prediction speed of ~5100 observations/second for temperature 45000 observations/second for CO2 due to iterative optimization of the training time 469.28 seconds for temperature and 28.53 seconds for CO2 was very promising in forecasting COVID19 countermeasures before time.

Phosphorus (P) is the most important substance in inorganic fertilizers used in agriculture industry. In this study, a multi-product and multi-objective model is presented considering economic and environmental concerns to design a renewable and sustainable P-fertilizer supply chain management (PFSCM). To handle complexities of the proposed model, an ensemble knowledge-based three-stage heuristic-metaheuristic algorithm utilizing heuristic information available in the model, whale optimization algorithm, and variable neighborhood search (named H-WOA-VNS) is proposed. At first, a problem-dependent heuristic is designed to generate a set of near-optimal feasible solutions. These solutions are fed into a population-based whale optimization algorithm which benefits from both exploration and exploitation strategies. Finally, a single-solution metaheuristic based on variable neighborhood search is applied to further improve the quality of the solution using local search operators. The objective function of the algorithm is formulated as a weighted average function to minimize total economic cost, while increasing crop yield and P use efficiency. Experimental results over five synthetic datasets and a real case study of the P-fertilizer supply chain confirm the superiority of the proposed method against the state-of-the-art techniques. The results demonstrate that the proposed method performs well in optimizing both the economic cost and environmental issues.

A crop-weed simulation model is presented to compare and evaluate Integrated Weed Management (IWM) strategies. Specifically, the model was parameterized for soybean crops in competition with Euphorbia davidii Subils. We used both, weed and crop demographic data surveyed in agronomic fields of the central zone of the Buenos Aires province, Argentina, throughout two crop cycles (2011/2012 and 2013/2014). The proposed model underwent a calibration process and subsequent validation with 70/30 % data split respectively (N=37). Two annual-based and one multiannual-based case studies were simulated to demonstrate the performance of the model. Different IWM strategies were compared under both, operational and tactical planning horizons through the evaluation of different model outcomes (i.e. crop yield, interspecific competition, economic return, and environmental impact). Our case studies results suggest that the inclusion of cultural management practices could reduce weed interspecific competition by 46 to 97 % and weed seed production by 40 to 89%. An increment in both expected crop yield, by 6 to 20%, and annual gross margin, by 44 to 199 US$.ha-1, were obtained in silico for similar levels of environmental impact.

The establishment of thresholds is integral to environmental management. This paper introduces the use of thresholds in the context of deep-seabed mining, a nascent industry for which an exploitation regime of regulations, standards and guidelines is still in the process of being developed, and for which the roles and values of thresholds have yet to be finalised. There are several options for integrating thresholds into the International Seabed Authority’s regulatory regime, from being stipulated in regulations to being part of a mining contract, each option having its own advantages and disadvantages. Here we explore the range of ways that thresholds can be derived, set out the challenges in translating ecological and management data into thresholds, highlight factors for acceptance and operationalisation of thresholds in deep-seabed mining, and explain the necessity of refining thresholds as knowledge on impacts to features improves. Some comparable marine industries already use thresholds and these could potentially be used as starting points for the development of thresholds for deep-seabed mining. In order to be acceptable to the wide range of deep-seabed mining stakeholders, thresholds need to strike a balance among levels of harm acceptable by society, levels of environmental precaution justifiable by governments, scientific robustness, and operational practicality.

Glass fibers slowly dissolve and age when exposed to water molecules. Such a phenomenon also occurs when glass fibers are inside fiber-reinforced composites protected by the matrix. This en-vironmental aging results in the deterioration of the mechanical properties of the composite. In structural applications, GFRPs are continuously exposed to water environments for decades (typically design lifetime is around 25 years or even more). During their lifetime, these materials are affected by various temperatures, pH acidity levels, mechanical loads, and the synergy of these factors. The rate of the degradation process depends on the nature of glass, sizing, fiber orientation, and environmental factors such as acidity, temperature, and mechanical stress. In this work, degradation of typical industrial grade R-glass fibers, when inside an epoxy fiber-reinforced composite, is studied experimentally and computationally. A Dissolving Cylinder Zero-Order Kinetic (DCZOK) model was applied and could describe the long-term dissolution of glass composites, considering the influence of fiber orientation (hoop vs transverse), pH (1.7, 4.0, 5.7, 7.0, and 10.0), and temperature (20, 40, 60, and 80 °C). The limitations of the DCZOK model and effects of sizing protection, accumulation of degradation products inside the composite, and water availability were discussed. Experimentally dissolution was measured using ICP-MS. Like for the fibers, for GFRPs also, the temperature showed an Arrhenius-type influence on the ki-netics, increasing the rate of dissolution exponentially with increasing temperature. Similar to fibers, GFRPs showed a hyperbolic dependence on pH. The model was able to capture all of these effects, and the limitations were addressed.

Waste recovery is an important aspect towards human and environmental health protection. Unfortunately, proper food waste management is among the serious challenges in the field of solid waste management worldwide. Therefore, it is of great importance to conduct studies towards achieving efficient and cost-effective approaches for food waste management. This study investigated the potential of recovering food waste through maggots’ production as animal feed. The influence of fly attractant application on maggot production was also investigated. The study also investigated the potential of maggot production for waste recovery and reduction. Four different types of food waste (starch food leftovers, rotten bananas and peels, rotten pineapple and peels, and rotten oranges) were used in the investigation process. From the results, it was observed that the application of fly attractants had a significant effect on the production of maggots as determined by the weights after harvesting. Average weight of 94 g/kg of maggot was achieved from banana materials with an application of fly attractant during the 8th day of the cultivation; which is equivalent to a 32.4% increase from the same day when the material was cultured without applying fly attractant. Also, from the starch materials, about 77 g/kg of maggot weight was achieved; which is a 54.6% increase from the same day and the same material but without application of fly attractant. Moreover, the relative dry weight reduction in the trials varied from 52.5% to 82.4%.

Lead-210 from natural atmospheric fallout is widely used in multidisciplinary studies to date recent sediments. Some of the ²¹⁰Pb-based dating models can produce historical records of sediment accumulation rates (SAR) and initial activity concentrations ( ). The former have been profusely used to track past changes in the sedimentary conditions. Both physical magnitudes are differently affected by model errors (those arising for the partial or null accomplishment of some model assumptions). This work is aimed at assessing the effects on SAR and of model errors in the CRS, CS, PLUM and TERESA dating models, due to random variability in ²¹⁰Pb fluxes, which is a usual sedimentary condition. Synthetic cores are used as virtual laboratories for this goal. Independently of the model choice, SARs are largely affected by model errors, resulting in some large and spurious deviations from the true values. This questions their general use for tracking past environmental changes. are less sensitive to model errors and their trends of change with time may reflect real changes in sedimentary conditions, as it is shown with some real cores from varved sediments.

Social Economy institutions seek to provide answers to social problems, given that they naturally have a socially responsible mission. This study aims to answer the research question: how sustainable practices, namely environmental behaviour, have been adopted by Portuguese Private Social Solidarity Institutions (IPSS) with the purpose of contributing to Sustainable Development? To achieve this objective, qualitative research was carried out in 31 IPSS, which was framed within the scope of the TFA project (Theoretical framework for promotion of accountability in the social economy sector: the IPSS case). Semi-structured interviews were conducted, with a script based on the literature review, from May to July 2019, with those responsible for the management of these entities. A content analysis was conducted, using the NVivo12 Version 12.6.0 software, which enables data to be coded and categorised, reducing any researcher bias. The results indicate that most entities carry out activities of an environmental nature, related to the reuse of materials, the recycling of waste, the sale of materials for recycling, and user awareness. Several entities expressed financial limitations to the implementation of Environmental Management Systems and their accomplishment. However, the objections presented are not impossible to overcome, according to studies presented in other countries.

Coral reefs are critical ecosystems globally for marine fauna, biodiversity and through the services they provide to humanity. However, they are significantly threatened by anthropogenic stressors, such as climate change. By combining 9 environmental variables and ecological and health-based thresholds obtained from the available literature, we develop, using fuzzy logic (discontinuous functions), a Coral Reef Stress Exposure Index (CRSEI) for remotely monitoring coral reef exposure to environmental stressors. Our approach capitalises on the abundance of readily available satellite Earth Observation (EO) data available in the Google Earth Engine (GEE) cloud-based geospatial processing platform. CRSEI values from 3157 distinct reefs were generated and mapped across 12 important coral reef ecosystem regions. Quantitative analyses indicated that the index detected significant temporal differences in stress and was, therefore, able to capture historic change at a global scale. We also applied the CRSEI to three case-study reef ecosystems, previously well-monitored for stress and disturbance using other methods. PCA analysis indicated that depth, current, sea surface temperature (SST) and SST anomaly accounted for the greatest contribution to the variance in stress in these three regions. The CRSEI corroborated temporal and spatial differences in stress exposure from known disturbances within these reference regions, in addition to identifying the potential drivers of inter- and intra-region differences in stress, namely depth, degree heating weeks and SST anomaly. We discuss how the index can be further improved in future with site-specific thresholds for each stress variable, and the incorporation of additional variables not currently available in GEE. This index provides an open access tool, built around a free and powerful processing platform, that has broad potential to assist in the regular monitoring of our increasingly imperilled coral reef ecosystems, and, in particular, those that are remote or inaccessible.

The primary purpose of this article is to present a maturity model dealing with environmental manufacturing processes in a company. First, a theoretical approach is presented where evolution from the first industrial revolution to the present (Industry 4.0.) is outlined with a need to implement environmental initiatives. Chapter two contains a detailed literature review, which resulted in the creation of our own maturity model presented in the next chapter. According to some authors, Industry 4.0 is based on characteristics that have already been the focus of “lean and green” concepts. The practical part of the article is a case study that shows which areas of the manufacturing process have “environmental” potential. The goal was to move from resource consumption, pollutant emissions and more extensive manufacturing towards environmentally responsible manufacturing (ERM). Using environmental materials and methods reduces energy consumption, which generates cost savings and higher profits. Here, VSM (Value Stream Mapping) was applied to identify core processes with environmental potential. The final part of the article summarizes the work and presents future possibilities. This paper provides an understanding of the role of environmental manufacturing in the era of the 4th industrial revolution.

This article analyses the environmental impact of the measures imposed during the SARS-CoV-2 pandemic. We compare the evolution of atmospheric pollution levels in recent years and during lockdown, and assess the effects of the decrease in mobility and changes in patterns and lifestyles during the latter period. Thus, the reduction in the risk to human health brought about by the improvement of air quality during the months of confinement through the use of dose-response functions is estimated. The focus of the case study is the island of Tenerife. The island of Tenerife has been selected because it can serve as an example for other sites in Europe. We distinguish between the three areas with the highest population concentrations: the Metropolitan, Southern, and Northern areas. The impacts of air pollution and its relationship with changes in consumption and activity patterns are clearly distinguishable. Therefore, the lessons learned can be easily extrapolated to other areas, in both island and mainland contexts.

Organic-organic interactions play important roles in the secondary organic aerosol formation, but the interactions are complex and poorly understood. Here we use environmental molecular beam experiments combined with molecular dynamics simulations to investigate the interactions between methanol and nopinone, as atmospheric organic proxies. In the experiments, methanol monomers and clusters are sent to collide with three types of surfaces, i.e., graphite, thin nopinone coating on graphite and multilayer surfaces, at temperatures between 140 K and 230 K. Methanol monomers are efficiently scattered from the graphite surface, whereas the scattering is substantially suppressed from nopinone surfaces. The desorption from the three surfaces is similar, suggesting that all the surfaces have weak or similar influences on the methanol desorption. The molecular dynamics results show that upon collisions the methanol clusters shatter, and the shattered fragments quickly diffuse and recombine to clusters. The desorption involves a series of processes, including detaching from clusters and desorbing as monomers. The experimental results also show that all trapped methanol molecules completely desorb within a short experimental time scale at temperatures of 180 K and above. At lower temperatures, the desorption rate decreases, and a long experimental time scale is used to resolve the desorption, where three desorption components are identified. The fast component is beyond the experimental detection limit. The intermediate component exhibits multi-step desorption character and has an activation energy of E_a = 0.18 ± 0.03 eV, in good agreement with simulation results. The slow desorption component is related to diffusion processes due to the weak temperature dependence.

Temperature is one of the most important range-limiting factors for many seaweeds. Driven by the recent climatic changes, rapid northward shifts of species’ distribution ranges can potentially modify the phylogeographic signature of Last Glacial Maximum such as increased genetic diversity at lower latitudes. To explore this question in detail in the kelp Saccharina latissima, we used microsatellites and double digest RAD-sequencing derived SNPs on S. latissima sporophytes sampled within 11 sites spanning the entire European Atlantic latitudinal range of this species. In addition, we checked for statistical correlation between genetic marker allele frequencies and three environmental proxies (sea surface temperature, salinity, and water turbidity). Our findings revealed that genetic diversity was significantly higher for the northern localities compared to the southern ones in contrast to the expected phylogeographic pattern. This suggests that the southernmost S. latissima populations are negatively affected by the recent climatic changes but also that the recolonization of S. latissima range following the LGM may have occurred from northerly refugia. Seven SNPs and 12 microsatellite alleles were found to be significantly associated with at least one of the three environmental variables. We discuss the potential adaptive functions of the genes associated with the outlier markers and the importance of these markers for successful conservation and aquaculture strategies for S. latissima in this age of rapid global change.

Experiences of homelessness, although widely varied, are characterized by extensive time in public spaces, often outdoors. However, there has been little empirical research about the ways in which environmental factors affect individuals experiencing homelessness (IEHs). Therefore, the purpose of this study was to use an environmental justice approach to understand how cardiopulmonary health of IEHs is affected by episodic poor air quality in Salt Lake County. It was hypothesized that people who had experienced unsheltered homelessness and those who had been experiencing homelessness for longer periods of time would report greater health difficulties from poor air quality exposure. Through a combination of in-person semi-structured interviews with IEHs (n = 138) and access to corresponding state-based service provider databases, researchers examined both overall descriptives of and relationships between types (sheltered and unsheltered) and duration (chronic and non-chronic) of homelessness. More than 61% of IEHs reported physical reactions to air pollution, 37% reported air pollution-related emotional stress, and more than 89% had sought medical attention for a condition related to air pollution. Findings indicate that while IEHs report a number of health effects related to poor air quality, there were no significant differences between individuals based on either sheltered status or duration of their experiences of homelessness. This study provides an initial empirical inquiry to understand how environmental disamenities negatively influence IEHs, as well as noting that sheltered status and duration of homelessness are less impactful than originally hypothesized.

Greek yogurt (GY), a high-protein-low-fat dairy product, particularly prized for its sensory and nutritional benefits, revolutionized the North American yogurt market in less than a decade, bringing with it new sustainability challenges. The standard production of GY generates large volumes of acid whey, a co-product that is a potential source of environmental pollution if not recovered. This study aims to assess the environmental performance of different technologies and identify the main factors for improving GY production. A complete life cycle assessment (LCA) was performed to compare the standard technology (centrifugation) with two new technologies (fortification and ultrafiltration) to reduce acid whey volumes. Three milk protein concentrate alternatives were also assessed. Results show that the technology choice is not a clear discriminant factor. However, minimizing losses and wastage (accounting for 23 to 25% of the environmental impacts for all indicators) beyond the processing plant and selecting milk ingredients (accounting for 63 to 67% of the impacts) with low environmental impacts are key factors in improving the environmental performance of GY systems. From a methodological perspective, the results also highlight a shortcoming in the current International Dairy Federation LCA guidelines (2015) for treating the multifunctionality of GY systems.

Extreme environmental variations (EV), as a phenomenon deriving from climate change (CC), led to an exacerbated uncertainty on water availability and increased the likelihood of conflicts regarding water-dependent activities such as agriculture. In this paper, we investigate the role of conflict resolution mechanisms -one of Ostrom’s acclaimed Design Principles (DPs)- when social-ecological systems (SESs) are exposed to physical external disturbances. The theoretical propositions predict that SESs with conflict-resolution-mechanisms will perform better than those without them. We tested this proposition through a framed-field-experiment that mimicked an irrigation system. In this asymmetric setting, farmers were exposed to two (2) dilemmas: (i) how much to invest in the communal irrigation system’s (CIS) maintenance and (ii) how much water to extract. The setting added a layer of complexity: water availability did not only depend on the investment but also on the environmental variability. Our findings largely confirmed the theoretical proposition: groups with stronger institutional robustness are able to cope with EV better than those with weaker robustness. However, we also found that some groups, despite lacking conflict-resolution-mechanisms, were also able to address EV. We explored potential explanatory variables to these unexpected results. We found that subjects’ and groups’ attributes might address uncertainty and avert conflict. Thus, SESs’ capacity to respond to external disturbances, such as EV, might not only be a question of DPs. Instead, it might also be strongly related to group members' attributes and group dynamics. Our results pave the way for further research, hinting that some groups might be better equipped for mitigation measures, while others might be better equipped for adaptation measures.

The recent detection of SARS-CoV-2 RNA in feces has led to speculation that it can be transmitted via the fecal-oral/ocular route. This review aims to critically evaluate the incidence of gastrointestinal (GI) symptoms, the quantity and infectivity of SARS-CoV-2 in feces and urine, and whether these pose an infection risk in sanitary settings, sewage networks, wastewater treatment plants, and the wider environment (e.g. rivers, lakes and marine waters). Overall, severe GI dysfunction is only evident in a small number of COVID-19 cases, with 11 ± 2% exhibiting diarrhea and 12 ± 3% exhibiting vomiting and nausea. In addition to these cases, SARS-CoV-2 RNA can be detected in feces from some asymptomatic, mildly- and pre-symptomatic individuals. Fecal shedding of the virus peaks in the symptomatic period and can persist for several weeks, but with declining abundances in the post-symptomatic phase. SARS-CoV-2 RNA is occasionally detected in urine, but reports in fecal samples are more frequent. The abundance of the virus genetic material in both urine (ca. 10²-10⁵ gc/ml) and feces (ca. 10²-10⁷ gc/ml) is much lower than in nasopharyngeal fluids (ca. 10⁵-10¹¹ gc/ml). There is strong evidence of multiplication of SARS-CoV-2 in the GI tract and infectious virus has occasionally been recovered from both urine and stool samples. The level and infectious capability of SARS-CoV-2 in vomit remain unknown. In comparison to enteric viruses transmitted via the fecal-oral route (e.g. norovirus, adenovirus), the likelihood of SARS-CoV-2 being transmitted via feces or urine appears lower due to the lower relative amounts of virus present in feces/urine. The biggest risk of transmission will occur in clinical and care home settings where secondary handling of people and urine/fecal matter occurs. In addition, while SARS-CoV-2 RNA genetic material can be detected by in wastewater, this signal is greatly reduced by conventional treatment. Our analysis also suggests the likelihood of infection due to contact with sewage-contaminated water (e.g. swimming, surfing, angling) or food (e.g. salads, shellfish) is extremely low or negligible based on very low predicted abundances and limited environmental survival of SARS-CoV-2. These conclusions are corroborated by the fact that over eight million global cases of COVID-19 have occurred, but exposure to feces or wastewater has never been implicated as a transmission vector.

High levels of air pollution can contribute to high rate of the COVID-19 outbreaks. Air pollutants induce oxidative stress, inflammatory process, immune imbalance and coagulation at systemic level, making the organism susceptible to complications caused by various pathogens, including viruses, resulting in a possible important damage co-factor. Sperm cells are highly sensitive to the pro-oxidant effects of environmental pollutants, and may represent an important alarm bell indicating that the burden of environmental pressure in a certain area is causing damage to humans. A comparison of the maps of COVID-19 case fatality rates, male infertility rates and air pollution may suggest a way to understand the dynamics of the virus impact. Semen quality may be considered as an early and sensitive environmental marker, and also a potential susceptibility indicator to viral insults (including SARS-CoV-2 ) in heavily polluted areas. Therefore, assessing the burden of environmental exposure of a given population and its potential susceptibility to insults through early biological stress indicators may be helpful for predicting the risk of the adverse effects by the SARS-CoV-2 epidemic .

Corporate sustainability reporting, also known as Triple-bottom-line reporting, involves reporting nonfinancial and financial information to a broader set of stakeholders than just shareholders and seek to fortify an organization’s ability to manage key risks. The current case is that, the quality, rigor, and utility of sustainability reporting remains contentious with concerns about the suitability of the criteria or standards used to prepare the reports. Despite the rapid increase in the number of companies around the world adopting Global Reporting Initiative standards, little is known about the extent of practice of corporate sustainability reporting in public universities in Kenya. The study selected five universities that had their 2017-18 audited financial reports available online for the readers, which served as the main source of secondary data. The guidelines on corporate sustainability reporting was derived from literature review, which provided key indicators upon which the data from each university was evaluated. It was observed that almost all the institutions recognize the critical role of both internal and external independent audit of financial statements. In conclusion, financial reporting sustainability is guided by strict compliance to the factors of sustainability.

The formation of sinkholes in Winkler County, Texas is concerning due to the amount of oil and gas infrastructure and the potential for catastrophic losses. Evidences of new and potential sinkholes have been documented, and determining the cause of these sinkholes is paramount to mitigate the devastating consequences thereof. Studies shown that the Wink sinkholes result from both natural and anthropogenic influences. Data depicting land-cover changes, alterations in the hydrologic systems, climate changes, and oil and gas activity were analyzed in an effort to better understand the link between these processes and sinkhole formation. Results indicate that the combination of these processes lead to the current state; Land cover changes were highest in shrub versus grasses, undeveloped to developed and croplands. Rises in temperature and a decrease in precipitation indicate a shift towards a more arid climate. Changes to the hydraulic system are a direct result of these land cover changes while the groundwater quality depict an environment prone to dissolution. Historical oil and gas activities have created pathways of meteoric water infiltration to the underlying limestone and evaporite formation. The combination of these processes create an environment that accelerates sinkhole formations. Understanding these processes allows for the development and implementation of better land practices, better groundwater protections, and the need for monitoring and maintaining aging oil and gas infrastructure.

Over the last decades, the coated glass products, and especially the low-emissivity coatings have become a common building material used in modern architectural projects. More recently, these material systems became common in specialized glazing systems featuring solar energy harvesting. Apart from achieving the stability of optical parameters in multilayer coatings, it is also important to have improved control over the design of visual color properties of the coated glass. We prepare metal-dielectric composite (MDC) based multilayer thin-film structures using the RF-magnetron sputtering deposition and report on their optical and chromaticity properties in comparison with these obtained using pure metal-based Dielectric/Metal/Dielectric (DMD) trilayer structures of similar compositions. Experimentally achieved Hunter L, a, b values of MDC-based multilayer building blocks of coatings provide a new outlook on the engineering of future-generation optical coatings with better color consistency and developing approaches to broaden the range of achievable color coordinates and better environmental stability.

Community-engaged research is understood as existing on a continuum from less to more community engagement, defined by participation and decision-making authority. It has been widely assumed that more is better than less engagement. However, we argue that what makes for good community engagement is not simply the extent but the fit or alignment between the intended approach and the various contexts shaping the research projects. This article draws on case studies from three Community Engagement Cores (CECs) of NIEHS-funded Environmental Health Science Core Centers (Harvard University, UC Davis and University of Arizona,) to illustrate the ways in which community engagement approaches have been fit to different contexts and the successes and challenges experienced in each case. We analyze the processes through which the CECs work with researchers and community leaders to develop place-based community engagement approaches and find that different strategies are called for to fit distinct contexts. We find that alignment of the scale and scope of the environmental health issue and related research project, the capacities and resources of the researchers and community leaders, and the influences of the socio-political environment are critical for understanding and designing effective and equitable engagement approaches. These cases demonstrate that the types and degrees of alignment in community-engaged research projects are dynamic and evolve over time. Based on this analysis, we recommend that CBPR scholars and practitioners select a range of project planning and management techniques for designing and implementing their collaborative research approaches and both expect and allow for the dynamic and changing nature of alignment.

Dams design and their operation cause strong environmental alteration and therefore a long-term debate is ongoing for the scale of these projects. At the same time, the concept of Environmental Flow Assessment (EFA) is a crucial element of modified ecosystems featuring large infrastructure such as dams and reservoirs for mitigating potential environmental degradation while they operate. Nowadays, integrated scientific frameworks are required to quantify the risks caused by large infrastructure. Through the use of stochastic analysis, it is possible to quantify these uncertainties, and present a solution that incorporates long-term persistence and environmental sustainability into a balanced reservoir simulation model. In this work, an attempt is made to determine a benchmark reservoir size incorporating hydrological and ecological criteria though stochastic analysis. The primary goal is to ensure the best possible conditions for the ecosystem, and then secondarily to allow a steady supply of water for other uses. Using a synthetic timeseries based on historical inputs, it is possible to determine and preserve essential statistical characteristics of a river’s streamflow, and use these to detect the optimal reservoir capacity that maximizes environmental and local water demand reliability.

In recent years, the anticipation of sustainable commercial supersonic jet operations has elevated again. Advances in propulsion together with the increased usage of composite materials favour the potential of sustained and cost efficient supersonic commercial operations. However, obstacles remain with regards to the certification of the new supersonic aircraft platforms, while the two main certification bodies EASA and FAA are under pressure to develop certification requirements which will reassure that the supersonic operations are going to have the least possible environmental impact. From a design perspective, past and current research suggests that a trade-off exists between the aircraft performance and the environmental impact, which should be balanced. The current study attempts to balance this trade-off and to conceptually design a SuperSonic Business Jet (SSBJ) by taking into account environmental concerns of the supersonic flight together with design methods that facilitate a sustained supersonic cruise. An environmental impact assessment is undertaken for the SSBJ design and its results are compared to a typical commercial subsonic airliner.

Mineral profile of beef interests human health, but also animal performance and meat quality. This study analyzes the relationships of 20 minerals in beef (ICP-OES) with 3 animal performance and 13 meat quality traits analyzed on 182 samples of Longissimus thoracis. Animals’ breed and sex showed limited effects. The major sources of variation (farm/date of slaughter, individual animal within group and side/sample within animal) differed greatly from trait to trait. Mineral contents were correlated to animal performance and meat quality being significant 52 out of the 320 correlations at the farm/date level, and 101 out of the 320 at the individual animal level. Five latent factors explained 69% of mineral co-variation. The most important, “Mineral quantity” factor correlated with age at slaughter and with the meat color traits. Two latent factors (“Na+Fe+Cu” and “Fe+Mn”) correlated with performance and meat color traits. Two other (“K-B-Pb” and “Zn”) correlated with meat chemical composition and the latter also with carcass weight and daily gain, and meat color traits. Meat cooking losses correlated with “K-B-Pb”. Latent factor analysis appears be a useful means of disentangling the very complex relationships that the minerals in meat have with animal performance and meat quality traits.

Dendritic cells (DCs) are the professional antigen-presenting cells that recognize and present antigens to naïve T cells to induce antigen-specific adaptive immunity. Among the T-cell subsets, T helper type 2 (Th2) cells produce the humoral immune responses required for protection against helminthic disease by activating B cells. DCs induce a Th2 immune response at a certain immune environment. Basophil, eosinophil, mast cells, and type 2 innate lymphoid cells also induce Th2 immunity. However, in the case of DCs, controversy remains regarding which subsets of DCs induce Th2 immunity, which genes in DCs are directly or indirectly involved in inducing Th2 immunity, and the detailed mechanisms underlying induction, regulation, or maintenance of the DC-mediated Th2 immunity against allergic environments and parasite infection. A recent study has shown that a genetic defect in DCs causes an enhanced Th2 immunity leading to a severe atopic dermatitis. We summarize the Th2 immune-inducing DC subsets, the genetic and environmental factors which involved in DC-mediated Th2 immunity, and current therapeutic approaches for Th2-mediated immune disorders. This review is to provide an improved understanding of DC-mediated Th2 immunity and Th1/Th2 immune balancing, leading to control over their adverse consequences.

Abstract: Background: Exposure to ETS (Environmental Tobacco Smoke) is one of the most toxic environmental exposures. Objective: To investigate the impact of ETS on physiological, biochemical, psychological indicators, on the urine antioxidant capacity (AC) and oxidative damage to lipids in a pilot sample of healthy pregnant women. Methods: The exposure to ETS was investigated by a validated questionnaire, urine cotinine and the marker of oxidative damage to lipids - 8-isoprostane concentrations using an ELISA kit. Urine AC was determined by the spectrophotometric TEAC method. From the sample of pregnant women (n=319, average age 30.84 ± 5.09 years) in 80 the levels of cotinine and oxidative stress markers were analyzed. Results: From our sample, 5 % individuals (7.4 % objectified by cotinine) were current smokers and 25 % reported passive smoking in the household (18.8 % objectified by cotinine). The Kappa was 0.78 for smokers and 0.22 for ETS exposed non-smokers. Smokers as well as non-smokers had significantly higher (p<0.05) urine AC than ETS exposed non-smokers. Non-smokers had significantly lower levels of 8-isoprostane than smokers (p<0.01) and ETS-exposed non-smokers (p<0.05). Correlations between urine levels of cotinine and AC were positive in ETS exposed non-smokers. Conclusion: The harmful effect of active and passive smoking on oxidative stress parameters has been indicated.

Abstract: The aim of this study was to compare the influence of corporate board characteristics on the extent of environmental disclosure quantity of listed firms in two leading emerging economies in Africa, South Africa (integrated reporting framework) and Nigeria (traditional reporting framework). Methods: The sample was comprised of 303 firms including environmentally sensitive companies purposively selected for content analysis study in South Africa (213) and Nigeria (90). We used both descriptive, multivariate and regression models to comparatively analyze the differences about corporate board characteristics as determinants of the extent of their environmental disclosure quantity. Results: The results reveal a more significant positive association between board characteristics and environmental disclosure in South Africa and less relevant association in Nigeria. Also, the results support that board independence arrangement may serve as bonding mechanisms in weak reporting environments, suggesting a substitutive relationship between board independence and the regulatory framework. Quiet revealing a board with environmental committee show a higher tendency to be ecologic transparent in both countries. However, in a traditional reporting framework, the environmental committee is not enough; its effect was insignificant and highly significant in the integrated reporting framework. Further revealed is the significant positive effect of industry membership influence on environmental disclosure. In all estimated models of South Africa sample show that 45% of environmentally sensitive industries significantly influence environmental disclosure, while 51% is environmentally polluting industries in Nigeria show less concern on environmental disclosure. Interestingly, Audit firm size (Big4) positively and statistically significantly associated with overall environmental reporting in both countries. The results are consistent with stakeholder theory, agency theory, institutional and legitimacy theory suggesting that a strong board size, independent members of the board with auditing experience, the active environmental committee in conjunction with solid audit reputation may reduce information asymmetry. Our findings will be helpful for policymakers and other regulators who are interested in environmental impact reporting.

The devastating growth in the worldwide frequency of neurocognitive disorders and its allied difficulties such as decline in memory, spatial competency, and ability to focus poses a significant psychological public health problem. Inhibitor of Differentiation (ID) proteins are members of a family of helix-loop-helix (HLH) transcription factors. ID proteins have been demonstrated to be involved in neurodevelopmental & depressive diseases and thus may influence neurocognitive deficiencies due to environmental exposure. Previously, it has been demonstrated that environmental factors such as estrogenic endocrine disruptors (EEDs) have played an essential role in the influence of various neurocognitive disorders such as Alzheimer’s, Dementia, and Parkinson’s disease. Based on this increasing number of reports, we consider the impact of these environmental pollutants on ID proteins. Better understanding of how these ID proteins by which EED exposure can affect neurocognitive disorders in populations will prospectively deliver valuable information in the impediment and regulation of these diseases linked with environmental factor exposure.

Wireless sensor networks can provide a cheap and flexible infrastructure to support the measurement of noise pollution. However, the processing of the gathered data is challenging to implement on resource-constrained nodes, because each node has its own limited power supply, low-performance and low-power micro-controller unit and other limited processing resources, as well as limited amount of memory. We propose a sensor node for monitoring of indoor ambient noise. The sensor node is based on a hardware platform with limited computational resources and utilizes a number of simplifications to approximate more complex and costly signal processing stage. Furthermore, to reduce the communication between the sensor node and a sink node, as well as the power consumed by the IEEE 802.15.4 (ZigBee) transceiver, we perform digital A-weighting filtering and non-calibrated calculation of the sound pressure level on the node. According to experimental results, the proposed sound level meter can accurately measure the noise levels of up to 100~dB, with the mean difference of less than 2~dB compared to Class 1 sound level meter. The proposed device can continuously monitor indoor noise for several days. Despite the limitations of the used hardware platform, the presented node is a promising low-cost and low-power solution for indoor ambient noise monitoring.

Atmospheric pollution arising from diesel-powered engines can result in acute and chronic diseases of the respiratory and cardiovascular systems. The annual carnival festival that takes place in the city of Salvador, Bahia-Brazil, is a large-scale event that gathers approximately 2 m revelers and 170,000 workers who accompany dozens of sound-trucks, or trios elétricos, for a period of seven days. These slow-moving sound-trucks run on diesel fuel, constantly exposing those around them to exhaust fumes. The present study aimed to evaluate air quality along the approximately 10km-long carnival parade circuit and determine possible impacts on human health. We applied a three-phase risk analysis strategy from 2007–2009: 1) hazard identification, 2) risk characterization and 3) risk management. Our quantification of atmospheric particulate matter 2.5 (PM2.5) and nitrogen dioxide (NO₂) concentrations revealed variable levels of PM2.5 ranging from 19 µg/m³ to 580 µg/m³, with peaks of up to 800 μg/m³ at sound-truck concentration areas. We then assessed the effects of air pollution on human health using ophthalmologic parameters obtained from 28 carnival volunteers, who often presented symptoms of eye irritation. Finally, we established strategies to communicate the study’s objectives and obtained results to the population through media outlets and open discussions with government agencies. According to our risk analysis, carnival sound-trucks represent the main source of atmospheric PM2.5 and NO₂ pollution during the annual 7-day carnival festival. As a consequence of our research, the municipal government of Salvador issued an addendum to its carnival legislation mandating organizers to monitor atmospheric pollution, and, subsequently, all large-scale public events. Municipal government authorities have also promoted a shift from petroleum-based diesel fuel to biodiesel, a less-polluting fuel, for all adapted carnival sound-trucks. Our approach, which employed easily accessible and inexpensive methodology, provided substantial scientific evidence to support improvements in the regulation of air quality during large-scale public events held in the city of Salvador.Keywords: environmental

This study investigates the environmental parameters contributing to the Urban Heat Island (UHI) effect in historically built environments, focusing on Matera's Street Canyon. The primary objective is to enhance understanding of heritage centers' ecological sustainability and management frameworks. The study involves two main phases: the initial research and development phase, including a comprehensive literature review and methodology development, followed by the empirical data gathering and analysis phase, utilizing advanced techniques such as 3D laser scanning, satellite imagery, and meteorological data integration. Key findings reveal significant correlations between urban morphology, material properties, and UHI intensity, suggesting stra-tegic urban planning interventions to mitigate UHI effects. This research provides actionable in-sights for urban planners and policymakers, emphasizing the importance of balancing heritage preservation with modern sustainability needs.