An adaptor signature can be viewed as a signature concealed with a secret value and, by design, any two of the trio yield the other. In a multiparty setting, an initial adaptor signature allows each party create additional adaptor signatures without the original secret. Adaptor signatures help address scalability and interoperabity issues in blockchain. They can also bring some important advantages to cryptocurrencies, such as low on-chain cost, improved transaction fungibility, and less limitations of a blockchain’s scripting language. In this paper, we propose a new two-party adaptor signature scheme that relies on quantum-safe hard problems in coding theory. The proposed scheme uses a hash-and-sign code-based signature scheme introduced by Debris-Alazard et al. and a code-based hard relation defined from the well-known syndrome decoding problem. To achieve all the basic properties of adaptor signatures formalized by Aumayr et al., we introduce further modifications to the aforementioned signature scheme. We also give a security analysis of our scheme and its application to the atomic swap. After providing a set of parameters for our scheme, we show that it has the smallest pre-signature size compared to existing post-quantum adaptor signatures.

Ultrasound based haptic feedback is a potential technology for human-computer interaction (HCI) with the advantages of low cost, low power consumption and controlled force. In this paper, the phase optimization for multipoint haptic feedback based on ultrasound array is investigated and the corresponding experimental verification is provided. A mathematical model of acoustic pressure is established for the ultrasound array and then a phase optimization model for an ultrasound transducer is constructed. We propose a pseudo-inverse (PINV) algorithm to accurately determine the phase contribution of each transducer in the ultrasound array. By controlling the phase difference of the ultrasound array, the multipoint focusing forces are formed leading to various shapes such as geometries and letters that can be visualized. Because the unconstrained PINV solution results in unequal amplitudes for each transducer, a weighted amplitude iterative optimization is deployed to further optimize the phase solution, by which the uniform amplitude distributions of each transducer are obtained. For the purpose of experimental verifications, a platform of ultrasound haptic feedback consisting of a Field Programmable Gate Array (FPGA), an electrical circuit and an ultrasound transducer array is prototyped. The haptic performances of single point, multiple points and dynamic trajectory were verified by controlling the ultrasound force exerted on the liquid surface. The experimental results demonstrate that the proposed phase optimization model and theoretical results are effective and feasible, and the acoustic pressure distribution is consistent with the simulation results.

This work involves results of research on short-term and long-term DC-drifts in electro-optical modulators based on annealed proton exchange waveguides in LiNbO3 crystals after wafer pre-annealing. The relaxation time of the DC-drift of the operating point for a short-term drift is minutes, and for a long-term drift, hours and days. DC-drift was measured by applying bias voltage and changing crystal temperature. Obtained results shows significant impact on stability of operating point in EO-modulators after treatment of defective structure of the near-surface layer of a LiNbO3 crystal. Treatment of the disturbed near-surface layer of a LiNbO3 crystal results in twice reduction of short-term DC-drift and increase of operation stability of electro-optical modulators during long-term measurement of temperature by activation energy calculation.

Plasmodium species that cause malaria, a disease responsible for about half a million deaths per annum despite concerted efforts to combat it. The causative agent depends on type III beta phosphatidylinositol 4-kinase (PPI4K) during the development of merozoite. PPI4K is the only clinically validated Plasmodium kinase so far and its inhibitors are effective both in vitro and in vivo. In this work, a small library of ~22 000 fragments was virtually screened using PPI4K homology model to discover potential ligands of the enzyme. 16 virtual hits were selected based on ≤ -9.0 kcal/mol binding energy cut off and were subjected to similarity and substructure searching after they had passed PAINS screening. The derivatives obtained showed improved binding energies, which ranged from -10.00 to -13.80 kcal/mol. Moreover, the topmost ranking compound 31, with interesting drug-like quality was stable within the protein’s binding cavity during the 10 ns molecular dynamics simulation period. In addition, analysis of its binding pose revealed some unique binding interactions with PPI4K active site residues as the basis for the observed improved binding affinity. Overall, compound 31 appears to be a viable starting point for the development of PPI4K inhibitors with antimalarial activity.

This paper presents a theoretically and methodologically grounded GIS-based model for the measurement and mapping of an index of living conditions in urban residential areas across Sweden. Further, the model is compared and evaluated using the Swedish Police’s assessment of crime-exposed areas. The results indicate that geographically measured vulnerable living conditions overlap to a large extent with the areas assessed to be crime-exposed by the Swedish Police. Over 61% of the police-defined crime-exposed areas are characterized by vulnerable living conditions. The results also show that the overlap is not perfect and that there are vulnerable areas that are not included in the police’s assessment of crime-exposed areas, but which are nonetheless characterized by vulnerable living conditions that could negatively affect the development of crime. It is also proposed that the model and the mapped index of living conditions provide a more well-grounded scientific basis for the police's assessment work. As a first step, the Swedish police have implemented the model and the mapped index in the work process employed in their annual identification of crime-exposed or at-risk areas. In addition to assisting the police, the model and the mapped index could also be used to support other societal actors working with vulnerable areas.

In recent years, several industries have registered an impressive improvement in technological advances such as Internet of Things (IoT), e-commerce, vehicular networks, etc. These advances have sparked an increase in the volume of information that gets transmitted from different nodes of a computer network (CN). As a result, it is crucial to safeguard CNs against security threats and intrusions that can compromise the integrity of those systems. In this paper, we propose a machine mearning (ML) intrusion detection system (IDS) in conjunction with the Genetic Algorithm (GA) for feature selection. To assess the effectiveness of the proposed framework, we use the NSL-KDD dataset. Furthermore, we consider the following ML methods in the modelling process: decision tree (DT), support vector machine (SVM), random forest (RF), extra-trees (ET), extreme gradient boosting (XGB), and naïve Bayes (NB). The results demonstrated that using the GA algorithm has a positive impact on the performance of the selected classifiers. Moreover, the results obtained by the proposed ML methods were superior to existing methodologies.

Intelligent systems are transforming the world, as well as our healthcare system. We propose a deep learning-based cough sound classification model that can distinguish between children with healthy versus pathological coughs such as asthma, upper respiratory tract infection (URTI), and lower respiratory tract infection (LRTI). In order to train a deep neural network model, we collected a new dataset of cough sounds, labelled with clinician's diagnosis. The chosen model is a bidirectional long-short term memory network (BiLSTM) based on Mel Frequency Cepstral Coefficients (MFCCs) features. The resulting trained model when trained for classifying two classes of coughs -- healthy or pathology (in general or belonging to a specific respiratory pathology), reaches accuracy exceeding 84\% when classifying cough to the label provided by the physicians' diagnosis. In order to classify subject's respiratory pathology condition, results of multiple cough epochs per subject were combined. The resulting prediction accuracy exceeds 91\% for all three respiratory pathologies. However, when the model is trained to classify and discriminate among the four classes of coughs, overall accuracy dropped: one class of pathological coughs are often misclassified as other. However, if one consider the healthy cough classified as healthy and pathological cough classified to have some kind of pathologies, then the overall accuracy of four class model is above 84\%. A longitudinal study of MFCC feature space when comparing pathologicial and recovered coughs collected from the same subjects revealed the fact that pathological cough irrespective of the underlying conditions occupy the same feature space making it harder to differentiate only using MFCC features.

The experience gained over the last hundred years clearly indicates that two groups of viruses represent the main risk for the development of highly transmissible epidemics and pandemics in the human species: influenza viruses and coronaviruses (CoV). Although the search for viruses with pandemic potential in the environment may have an important predictive and monitoring role, it is still based on empirical methodologies, mostly translated from the clinic and not fully validated for environmental matrices.As far as the SARS-CoV-2 pandemic, currently underway, is concerned, environmental monitoring activities aiming at checking the presence of SARS-CoV-2 in wastewater can be extremely useful to predict and control the diffusion of the disease. For this reason, the present study aims to evaluate the SARS-CoV-2 diffusion by means of a wastewater-based environmental monitoring developed in Piedmont, N-W Italy, during the pandemic second and third waves. Sampling strategies, sampling points, sample pre-treatments and analytical methods have been developed and validated to give representative and reliable results. The outcomes highlighted by the present paper demonstrate a strong correlation between SARS-CoV-2 concentration in untreated wastewater and epidemic evolution in the considered areas as well as a predictive potential that could provide decision-makers with indications for establishing effective policies to mitigate the effects of the ongoing pandemic and to prepare response plans for future pandemics that could certainly arise in the decades to come.Moreover, the study highlights the potential of wastewater treatment plants to degrade the genetic material referable to SARS-CoV-2 as well.In conclusion, the preliminary data reported in the present paper, although they need to be complemented by further studies considering other geographical regions as well, are very promising.

Shape-memory hydrogels (SMH) are as multifunctional, actively-moving polymers of interest in biomedicine. In loosely crosslinked polymer networks gelatin chains may form triple helices, which can act as temporary netpoints in SMH, depending on the presence of salts. Here, we show programming and initiation of the shape-memory effect of such networks based on a thermomechanical process compatible with the physiological environment. The SMH were synthesized by reaction of glycidylmethacrylated gelatin with OEG α,ω-dithiols of varying crosslinker length and amount. Triple helicalization of gelatin chains is shown directly by wide-angle X-ray scattering and indirectly via the mechanical behavior at different temperatures. The ability to form triple helices increased with the molar mass of the crosslinker. Hydrogels had storage moduli of 0.27-23 kPa and Young’s moduli of 215-360 kPa at 4 °C. The hydrogels were hydrolytically degradable, with full degradation to water soluble products within one week at 37 °C and pH = 7.4. A thermally-induced shape-memory effect is demonstrated in bending as well as in compression tests, in which shape recovery with excellent shape recovery rates Rr close to 100% were observed. In the future, the material presented here could be applied e.g. as self-anchoring devices mechanically resembling the extracellular matrix.

Emerin is the inner nuclear membrane protein involved in maintaining the mechanical integrity of the nuclear membrane. Mutations in EMD encoding emerin cause Emery–Dreifuss muscular dystrophy (EDMD). There has been accumulating evidence that emerin regulation of specific gene expression is associated with this disease, but the exact function of emerin has still less revealing. Here, we have shown that emerin downregulates Signal transducer and activators of transcription 3 (STAT3) signaling, activated exclusively by Janus-kinase (JAK). Deletion mutation experiments showed that the lamin-binding domain of emerin is essential for the inhibition of STAT3 signaling. Emerin interacted directly and co-localized with STAT3 in the nuclear membrane. Emerin knockdown induced STAT3 target genes Bcl2 and Survivin to increase cell survival signals and suppress hydrogen peroxide-induced apoptosis in HeLa cells. Specifically, downregulation of BAF or lamin A/C increases STAT3 signaling, suggesting that correct-localized emerin by assembling with BAF and lamin A/C acts as an intrinsic inhibitor against STAT3 signaling. In C2C12 cells, emerin knockdown induced STAT3 target gene, Pax7, and activated abnormal myoblast proliferation associated with muscle wasting in skeletal muscle homeostasis. Our results indicate that emerin downregulates STAT3 signaling by inducing retention of STAT3 and delaying STAT3 signaling in the nuclear membrane. This mechanism provides clues to the etiology of emerin-related muscular dystrophy and could be a new therapeutic target for treatment.

The evolution towards Industry 4.0 is driving the need for innovative solutions in the area of network management, considering the complex, dynamic and heterogeneous nature of ICT supply chains. To this end, Intent-Based networking (IBN) which is already proven to evolve how network management is driven today, can be implemented as a solution to facilitate the management of large ICT supply chains. In this paper, we first present a comparison of the main architectural components of typical IBN systems and, then, we study the key engineering requirements when integrating IBN with ICT supply chain network systems while considering AI methods. We also propose a general architecture design that enables intent translation of ICT supply chain specifications into lower level policies, to finally show an example of how the access control is performed in a modelled ICT supply chain system.

Path planning in 3D environment is a fundamental research area for robots and autonomous vehicles. Based on the principle ``the shortest path consists of tangents'', RimJump* is proposed as a tangent-based path planning method suitable for finding the shortest path (both off-ground and on-ground) in 3D space (e.g., octomap and point cloud) for mobile platform to follow. RimJump* searches the tangent graph in the form of a path tree and considers the geometrical properties of the locally shortest path. Therefore, the method can provide all of the locally shortest paths that connect the starting point and the target, including the globally shortest path. And the time cost of RimJump* is insensitive to map scale increases in comparison to methods that search the whole passable space rather than the surface of the obstacle, e.g., Dijkstra and A*. In the Results, RimJump* is compared with other methods in terms of path length and time cost.

Friction stir alloying (FSA) of commercially pure Cu with Ni, Zn, and Mg is implemented in the current study. The successfully fabricated alloy structure has been scrutinized in terms of mechanical and micro-structural standpoints. Energy-dispersive X-ray spectroscopy revealed a uniform distribution of alloying elements and coalescence at the atomic level. The compositional and grain size heterogeneity is managed in the stir zone, which pave way for microstructural control using FSA. Thus, the present study carries significance for the development of novel materials whose fabrication requires temperature far below the melting point of base metals. Ultra-refinement of grains is found to accompany the alloying process, with ~ 440 nm being the smallest grain size. Maximum and average micro-hardness enhancement of 18.4 % and 6 % is observed for the fabricated alloy. Tensile properties have also been investigated and co-related with the micro-structural morphology. The shift towards grain bimodality has also been reported, which is a highly sought property in the present day, especially to overcome the strength-ductility trade-off.

Autofocus is an essential part of the SAR imaging process. Multi-subaperture autofocus algorithm is a commonly used autofocus algorithm for processing SAR stripmap mode data. The multi-subaperture autofocus algorithm has two main steps, the first is to estimate the phase error gradient within the subaperture, the second is to splice the phase error gradient, that is, to remove the shift amount between the estimated adjacent subapertures’ error gradients. Previous gradient-splicing algorithms assume that the estimation of subaperture error is accurate, but when the estimation of subaperture phase error gradients is not accurate enough, these algorithm performance will be degraded. A new phase error gradient splicing algorithm is proposed in this paper. It roughly estimates the shift amount first, and then finely estimates the shift amount based on the minimum-entropy criterion, which can improve the robustness of splicing especially when the estimation of the phase error gradients of the subaperture is not accurate enough. To speed up the algorithm, a variable-step-size search method is used. Simulation and experimental results show that the algorithm has enough accuracy and still has good performance when other splicing algorithms doesn’t perform well.

Manual measurement of rock discontinuities is time-consuming and subjective according to the experience of the surveyor. This work proposes a three-dimensional laser scanning-based method for the semi-automatic identification of rock discontinuities. Multisite cloud scanning is performed with real-time kinematic (RTK)-assisted orientation to estimate the rock fracturing degree; then, discontinuity orientations are extracted with the man–machine interactive method or automatic method. The proposed method was applied to actual examples to illustrate its accuracy at identifying rock discontinuities. The sensitivity of the identification accuracy to different parameters was investigated.

As the development of high-throughput technologies, more and more high-dimensional or ultra high-dimensional genomic data are generated. Therefore, how to make effective analysis of such data becomes a challenge. Machine learning (ML) algorithms have been widely applied for modelling nonlinear and complicated interactions in a variety of practical fields such as high-dimensional survival data. Recently, the multilayer deep neural network (DNN) models have made remarkable achievements. Thus, a Cox-based DNN prediction survival model (DNNSurv model) , which was built with Keras and Tensorflow, was developed. However, its results were only evaluated to the survival datasets with high-dimensional or large sample sizes. In this paper, we evaluate the prediction performance of the DNNSurv model using ultra high-dimensional and high-dimensional survival datasets, and compare it with three popular ML survival prediction models (i.e., random survival forest and Cox-based LASSO and Ridge models). For this purpose we also present the optimal setting of several hyper-parameters including selection of tuning parameter. The proposed method demonstrates via data analysis that the DNNSurv model performs overall well as compared with the ML models, in terms of three main evaluation measures (i.e., concordance index, time-dependent Brier score and time-dependent AUC) for survival prediction performance.

Clustering algorithms for multi-database mining (MDM) rely on computing $(n^2-n)/2$ pairwise similarities between $n$ multiple databases to generate and evaluate $m\in[1, (n^2-n)/2]$ candidate clusterings in order to select the ideal partitioning which optimizes a predefined goodness measure. However, when these pairwise similarities are distributed around the mean value, the clustering algorithm becomes indecisive when choosing what database pairs are considered eligible to be grouped together. Consequently, a trivial result is produced by putting all the $n$ databases in one cluster or by returning $n$ singleton clusters. To tackle the latter problem, we propose a learning algorithm to reduce the fuzziness in the similarity matrix by minimizing a weighted binary entropy loss function via gradient descent and back-propagation. As a result, the learned model will improve the certainty of the clustering algorithm by correctly identifying the optimal database clusters. Additionally, in contrast to gradient-based clustering algorithms which are sensitive to the choice of the learning rate and require more iterations to converge, we propose a learning-rate-free algorithm to assess the candidate clusterings generated on the fly in a fewer upper-bounded iterations. Through a series of experiments on multiple database samples, we show that our algorithm outperforms the existing clustering algorithms for MDM.

Model predictive control (MPC) is a multi-objective control technique that can handle 2 system constraints. However, the performance of an MPC controller highly relies on a proper 3 prioritization weight for each objective, which highlights the need for a precise weight tuning 4 technique. In this paper, we propose an analytical tuning technique by matching the MPC 5 controller performance with the performance of a linear quadratic regulator (LQR) controller. The 6 proposedmethodology derives the transformation of LQRweightingmatrixwith a fixedweighting 7 factor using discrete algebraic Riccati equation (DARE) and designs MPC controller using the 8 idea of discrete time linear quadratic tracking problem (LQT) in the presence of constraints. 9 The proposed methodology ensures the optimal performance between unconstrained MPC and 10 LQR controller and provides a sub-optimal solution while the constraints are active during 11 transient operations. The resultingMPC behaves as the discrete time LQR by selecting appropriate 12 weighting matrix in the MPC control problem and ensures the asymptotic stability of the system. 13 In this paper, the effectiveness of the proposed technique is investigated in the application of 14 a novel vehicle collision avoidance system which is designed in the form of linear inequality 15 constraints within MPC. The simulation results confirm the potency of the proposed MPC control 16 technique in performing a safe, feasible and collision free path while respecting the inputs, states 17 and collision avoidance constraints.

Cloud computing is an emerging area which provide on demand computing resources and services through internet. It is faster and efficient technique but prone to severe security attacks. In this paper author have proposed a Network Intrusion Detection System (NIDS) to detect attacks at front end and backend when bulky flow of data packets flowing in a cloud environment. In our framework we used Signature based detection system for identifying the intruder and the Anomaly based detection system for detecting network attacks. The NIDS sensors were placed in a collaborative manner to prevent the attacks and to update the knowledge bases. Author have used supervised learning model to detect abnormal behavior of packets from network traffic. The dataset were trained and tested in terms of precision, recall, accuracy and model build time to select the best machine-learning model for detection of intruder and to improve the computational time and performance.

Sedimentary microfacies division is the basis of oil and gas exploration research. The traditional sedimentary microfacies division mainly depends on human experience, which is greatly influenced by human factor and is low in efficiency. Although deep learning has its advantage in solving complex nonlinear problems, there is no effective deep learning method to solve sedimentary microfacies division so far. Therefore, this paper proposes a deep learning method based on DMC-BiLSTM for intelligent division of well-logging—sedimentary microfacies. First, the original curve is reconstructed multi-dimensionally by trend decomposition and median filtering, and spatio-temporal correlation clustering features are extracted from the reconstructed matrix by Kmeans. Then, taking reconstructed features, original curve features and clustering features as input, the prediction types of sedimentary microfacies at current depth are obtained based on BiLSTM. Experimental results show that this method can effectively classify sedimentary microfacies with its recognition efficiency reaching 96.84%.

Among the knowledge areas in which process mining has had an impact, the audit domain is particularly striking. Traditionally, audits seek evidence in a data sample that allows to make inferences about a population. Mistakes are usually committed when generalizing the results and anomalies, therefore, appear in unprocessed sets. However, there are some efforts to address these limitations using process mining-based approaches for fraud detection. To the best of our knowledge, no fraud audit method exists that combines process mining techniques and visual analytics to identify relevant patterns. This paper presents a fraud audit approach based on the combination of process mining techniques and visual analytics. The main advantages are: (i) a method is included that guides the use of the visual capabilities of process mining to detect fraud data patterns during an audit; (ii) the approach can be generalized to any business domain; (iii) well-known process mining techniques are used (Dotted Chart, Trace Alignment, Fuzzy Miner…). The techniques were selected by a group of experts and were extended to enable filtering for contextual analysis, to handle levels of process abstraction, and to facilitate implementation in the area of fraud audits. Based on the proposed approach, we developed a software solution that is currently being used in the financial sector as well as in the telecommunications and hospitality sector. Finally, for demonstration purposes, we present a real hotel management use case in which we detected suspected fraud behaviors, thus validating the effectiveness of the approach.

The development of microbial products for cancer treatment has been in the spotlight in recent years. In order to accelerate the lengthy and expensive drug development process, in silico screening tools are systematically employed, especially during the initial discovery phase. Moreover, considering the steadily increasing number of molecules approved by authorities for commercial use, there is a demand for faster methods to repurpose such drugs. Here we present a review on virtual screening web tools, publicly available databases of molecular targets and libraries of ligands, with the aim to facilitate the discovery of potential anticancer drugs based on microbial products. We provide an entry-level step-by-step description of the workflow for virtual screening of microbial metabolites with known protein targets, as well as two practical examples using freely available web tools. The first case presents a virtual screening study of drugs developed from microbial products using Caver Web, a web tool that performs docking along a tunnel. The second case comprises a comparative analysis between a healthy isocitrate dehydrogenase 1, a mutant that results in cancer, using the recently developed web tool PredictSNP^Onco. In summary, this review provides the basic and essential background information necessary for virtual screening experiments, which may accelerate the discovery of novel anticancer drugs.

Blockchain is the consensus-based technology to resolve the conflicts in Byzantine environments. Vehicles validate the messages received from the neighboring vehicles using Gradient Boosting Technique (GBT). Based on the validation results the message source vehicle generates the ratings that are to be uploaded to Road Side Units (RSUs) through that trust offset value can be calculated. All RSUs maintain the trust blockchain and each RSU tries to add their blocks to trust blockchain. We proposed a blockchain-based trust management model for VANET based on Tendermint. It eliminates the problem of malicious nodes entering the network and will also overcome the problem of power consumption. Simulation results also show that the proposed system is 7.8% and 15.6% effective and efficient in terms of Packet Delivery Ratio (PDR) and End-to-End Delay (EED) respectively to collect the trusted data between the vehicles.

Conventionally, partial differential equations (PDE) problems are solved numerically through discretization process by using finite difference approximations. The algebraic systems generated by this process are then finalized by using an iterative method. Recently, scientists invented a short cut approach, without discretization process, to solve the PDE problems, namely by using machine learning (ML). This is potential to make scientific machine learning as a new sub-field of research. Thus, given the interest in developing ML for solving PDEs, it makes an abundance of an easy-to-use methods that allows researchers to quickly set up and solve problems. In this review paper, we discussed at least three methods for solving high dimensional of PDEs, namely PyDEns, NeuroDiffEq, and Nangs, which are all based on artificial neural networks (ANNs). ANN is one of the methods under ML which proven to be a universal estimator function. Comparison of numerical results presented in solving the classical PDEs such as heat, wave, and Poisson equations, to look at the accuracy and efficiency of the methods. The results showed that the NeuroDiffEq and Nangs algorithms performed better to solve higher dimensional of PDEs than the PyDEns.

Automated machine learning (AutoML) has been heralded as the next wave in artificial intelligence with its promise to deliver high performance end-to-end machine learning pipelines with minimal effort from the user. However, despite AutoML showing great promise for computer vision tasks, to the best of our knowledge, no study has used AutoML for image-based plant phenotyping. To address this gap in knowledge, we examined the application of AutoML for image-based plant phenotyping using wheat lodging assessment with UAV imagery as an example. We compared the performance of an open-source AutoML framework, AutoKeras in image classification and regression tasks to transfer learning using modern convolutional neural network (CNN) architectures. For image classification which classified plot images as lodged or non-lodged, transfer learning with Xception and DenseNet-201 achieved best classification accuracy of 93.2%, whereas Autokeras had 92.4% accuracy. For image regression which predicted lodging scores from plot images, transfer learning with DenseNet-201 had the best performance (R2=0.8303, RMSE=9.55, MAE=7.03, MAPE=12.54%), followed closely by AutoKeras (R2=0.8273, RMSE=10.65, MAE=8.24, MAPE=13.87%). Interestingly, in both tasks, AutoKeras models had up to 40-fold faster inference times compared to the pretrained CNNs. The merits and drawbacks of AutoML compared to transfer learning for image-based plant phenotyping are discussed.

Mints emit diverse scents that exert specific biological functions and are relevance for applications. The current work strives to develop electronic noses that can electronically discriminate the scents emitted by different species of Mint as alternative to conventional profiling by gas chromatography. Here, 12 different sensing materials including 4 different metal oxide nanoparticle dispersions (AZO, ZnO, SnO2, ITO), one Metal-Organic Frame as Cu(BPDC), and 7 different polymer films including PVA, PEDOT: PSS, PFO, SB, SW, SG, PB were used for functionalizing of QCM sensors. The purpose was to discriminate six economically relevant Mint species (Mentha x piperita, Mentha spicata, Mentha spicata ssp. crispa, Mentha longifolia, Agastache rugosa, and Nepeta cataria). The adsorption and desorption datasets obtained from each modified QCM sensor were processed by three different classification models including Principal Component Analy-sis (PCA), Linear Discriminant Analysis (LDA), and k-Nearest Neighbor Analysis (k-NN). This allowed discriminating the different Mints with classification accuracies of 97.2% (PCA), 100% (LDA), and 99.9% (k-NN), respectively. Prediction accuracies with a repeating test measurement reached up to 90.6% for LDA, and 85.6% for k-NN. These data demonstrate that this electronic nose can discriminate different Mint scents in a reliable and efficient manner.

Identifying fake news on the media has been an important issue. This is especially true considering the wide spread of rumors on the popular social networks such as Twitter. Various kinds of techniques have been proposed for automatic rumor detection. In this work, we study the application of graph neural networks for rumor classification at a lower level, instead of applying existing neural network architectures to detect rumors. The responses to true rumors and false rumors display distinct characteristics. This suggests that it is essential to capture such interactions in an effective manner for a deep learning network to achieve better rumor detection performance. To this end we present a simplified aggregation graph neural network architecture. Experiments on publicly available Twitter datasets demonstrate that the proposed network has performance on a par with or even better than that of state-of-the-art graph convolutional networks, while significantly reducing the computational complexity.

At container terminals, many cargo handling processes are interconnected and take place in parallel. Within short time windows, many operational decisions need to be taken considering both time and equipment efficiency. During operation, many sources for disturbance exist. These are the reason why perfectly coordinated processes are possibly unraveled. An approach that considers disturbance factors while optimizing a given objective is simulation-based optimization. This study analyses simulation-based optimization as a procedure to simultaneously scale the number of utilized equipment and to adjust the choice and tuning of operational policies. The four meta-heuristics Tree-structured Parzen Estimator, Bayesian Optimization, Simulated Annealing, and Random Search guide the simulation-based optimization process. The results show that simulation-based optimization is suitable to identify the amount of required equipment and well-performing policies. Thereby, there is no clear ranking which of the meta-heuristics finds the best approximation of the optimum. The approximated optima suggest that pooling terminal trucks as well as a yard block assignment close to the quay crane is preferable. With an increasing number of quay cranes, the number of optimal terminal trucks for each quay crane decreases as well as the range of truck utilization within one experiment.

For the Remotely Piloted Aircraft Systems (RPAS) market to continue its current growth rate, cost-effective "Detect and Avoid" systems that enable safe beyond visual line of sight (BVLOS) operations are critical. We propose an audio-based "Detect and Avoid" system, composed of microphones and an embedded computer, which performs real-time inferences using a sound event detection (SED) deep learning model. Two state-of-the-art SED models, YAMNet and VGGish, are fine-tuned using our dataset of aircraft sounds and their performances are compared for a wide range of configurations. YAMNet, whose MobileNet architecture is designed for embedded applications, outperformed VGGish both in terms of aircraft detection and computational performance. YAMNet's optimal configuration, with > 70% true positive rate and precision, results from combining data augmentation and undersampling with the highest available inference frequency (i.e. 10 Hz). While our proposed "Detect and Avoid" system already allows the detection of small aircraft from sound in real time, additional testing using multiple aircraft types is required. Finally, a larger training dataset, sensor fusion, or remote computations on cloud-based services could further improve system performance.

The internet can broadly be divided into three parts: surface, deep and dark among which the latter offers anonymity to its users and hosts [1]. Deep Web refers to an encrypted network that is not detected on search engine like Google etc. Users must use Tor to visit sites on the dark web [2]. Ninety six percent of the web is considered as deep web because it is hidden. It is like an iceberg, in that, people can just see a small portion above the surface, while the largest part is hidden under the sea [3, 4, and 5]. Basic methods of graph theory and data mining, that deals with social networks analysis can be comprehensively used to understand and learn Deep Web and detect cyber threats [6]. Since the internet is rapidly evolving and it is nearly impossible to censor the deep web, there is a need to develop standard mechanism and tools to monitor it. In this proposed study, our focus will be to develop standard research mechanism to understand the Deep Web which will support the researchers, academicians and law enforcement agencies to strengthen the social stability and ensure peace locally & globally.

The incorporation of wind generation introduces challenges to the operation of the power system due to its uncertain characteristics. Therefore, the development of methods to accurately model the uncertainty is necessary. In this paper, the spatio-temporal Kriging and analog approaches are used to forecast wind power generation and used as input to solve an economic dispatch problem, considering the uncertainties of wind generation. Spatio-temporal Kriging takes into account the spatial and temporal information given by the database to enhance wind forecasts. We evaluate the performance of using the spatio-temporal Kriging, and comparisons are carried out versus other approaches in the framework of the economic power dispatch problem, for which simulations are developed on the modified IEEE 3-bus and IEEE 24-bus test systems. The results show that the use of Kriging-based spatio-temporal models in the context of economic power dispatch can provide an opportunity for lower operating costs in the presence of uncertainty when compared to other approaches.

A concise proof of the Riemann Hypothesis is presented by clarifying the Hadamard product expansion over the zeta zeros, demonstrating that the Riemann Hypothesis is true.

Geopolymers are ecologically-friendly inorganic materials which can be produced at low temperatures from industrial wastes such as fly ash, blast furnace slags or mining residues. Although to date their principal applications have been as alternatives to Portland cement building materials, their properties make them suitable for a number of more advanced applications, including as photocatalytic nanocomposites for removal of hazardous pollutants from waste water or the atmosphere. For this purpose, they can be combined with photocatalytic moieties such as metal oxides with suitable bandgaps to couple with UV or visible radiation, or with carbon nanotubes or graphene. In these composites the geopolymers act as supports for the photoactive components, but geopolymers formed from wastes containing oxides such as Fe2O3 show intrinsic photoactive behaviour. This review discusses the structure and formation chemistry of geopolymers and the principles required for their utilisation as photocatalysts. The literature on existing photocatalytic geopolymers is reviewed, suggesting that these materials have a promising potential as inexpensive, efficient and ecologically-friendly candidates for the remediation of toxic environmental pollutants and would repay further development.

This paper reassesses the detrimental effect on fatigue performance due to thicker sections based on extensive fatigue strength test database, taken from research program worldwide over the past half of a century in offshore oil & gas and renewable industry. The data entries in the database have been evaluated to ensure its data integrity. Statistical analyses on these S-N data are performed with or without the thickness correction at different exposure level to corrosive environment, in order to re-evaluate the suitability of current standards in regard to the thickness effect. The study has concentrated on T-joint, transverse butt welded joint and tubular joint as these are the most commonly used joint types in the offshore wind industry. The analysis indicates general agreement of fatigue strength with the thickness effects in current standard for in air conditions but great conservatism for corrosive environment.

A series of novel superabsorbent composites of poly(acrylic acid)/semicoke were prepared by polymerization of acrylic acid using ammonium persulphate as initiator, N,N’-methylenebisacrylamide as crosslinker and semicoke which was the by-product of coal carbonizing as the inorganic components. FTIR and SEM analysis indicated that the superabsorbent composites had been successfully polymerized and the semicoke participated into the construction of 3D polymeric network. Meanwhile, the effects of initiator, crosslinker, semicoke, neutralization degree as well as the pH value were investigated, and the results showed that superabsorbent composites containing 10% of semicoke possessed the maximum water absorbency of 584 g/g in distilled water and 75 g/g in 0.9 % NaCl solution. The superabsorbent composites kept the high water absorbency within a wide pH range of 4-11, and still exhibited better re-swelling capability even after seven times. The superabsorbent composite with the excellent performance is a potential water-retaining agent used in the agriculture.

The COVID-19 outbreaks have caused universities all across the globe to close their campuses and forced them to initiate online teaching. This article reviews the pedagogical foundations for developing effective distance education practices, starting from the assumption that promoting autonomous thinking is an essential element to guarantee full citizenship in a democracy and for moral decision making in situations of rapid change, which has become a pressing need in the context of a pandemic. In addition, the main obstacles related to this new context are identified, and solutions are proposed according to the existing bibliography in learning sciences.

The safety of people is an important phenomenon nowadays. This importance arises due to the crowded places including subway station, universities, colleges, airport, shopping mall and square, and city squares. Therefore, the development of an effective system based on physical characteristics of crowd layout is of significant demand. In this paper, we proposed a novel automated and intelligent systems for crowd event analysis based on a set of physical elements. For this purpose, we take into account optical flow and spatial-time gradient, contour features, and Gaussian processes. Our method combine these characteristics into a unique model to deal with the challenging problem of crowd event analysis. For evaluating our proposed method, we consider a benchmark dataset and a number of different performance metrics. These analysis demonstrate the robustness and effectiveness of our proposed method.

The most important issue in integrated next generation wireless systems (NGWS) by fourth generation networks which consists of various wireless architectures extending from cellular networks to satellite networks is to allow everyone around the world to connect seamlessly to applications anywhere at any time through the best network. Heterogeneous networks have created many challenges such as mobility management, handoff, resource management. For always best connectivity the selection of parameters plays an important role in the decision of vertical handoff, some of parameters are depend upon MT and some are depend upon the network conditions . In this paper we designed Intelligent Vertical Handoff based on Fuzzy Logic Decision model ( IVH-FL), IVH-FL model which has five parameters for vertical handoff decision : Received Signal Strength (RSS), Available bandwidth (B), Users Preference (UP), Mobile Speed (SM) and Power Consumption (PC), with the help of Fuzzy Logic tool box and concept of fuzzy linguistic variables. The results confirmed improvement performance , and reduced the number of unnecessary handover .

The bacterial composition of oral samples has traditionally been determined by PCR amplicon sequencing of 16S rRNA genes. Recent amplicon sequence variant (ASV)-based analyses of 16S rRNA genes differ from that based on operational taxonomic unit (OTU) clustering in the way it deals with sequences having potential errors. However, little information is available on its application in oral microbiome studies. Here, we conducted ASV-based analysis of oral microbiome samples using QIIME 2. We investigated the optimal parameters for sequence denoising, using DADA2, and found the trimming of the first 20 nucleotides from 5′-end of both paired reads avoided excessive sequence loss during chimera removal. Truncating reads at positions 240–245 allowed the removal of low-quality sequences while maintaining sufficient length to merge matching paired ends. Taxonomic assignment, using the naïve Bayes classifier trained with the V3-V4 region of reference 16S rRNA sequences in the extended human oral microbiome database (eHOMD), resulted in bacterial compositions similar to those of OTU-based analyses. Contrary to OTU-based clustering, ASV-based analysis showed taxonomic abundance at the genus or species level to not differ significantly in tongue microbiomes, regardless of brushing. QIIME 2 can, therefore, be a standard pipeline for ASV-based analysis of oral microbiomes.

The traditional standards employed for pain assessment have many limitations. One such limitation is reliability because of inter-observer variability. Therefore, there have been many approaches to automate the task of pain recognition. Recently, deep-learning methods have appeared to solve many challenges, such as feature selection and cases with a small number of data sets. This study provides a systematic review of pain-recognition systems that are based on deep-learning models for the last two years only. Furthermore, it presents the major deep-learning methods that were used in review papers. Finally, it provides a discussion of the challenges and open issues.

An autonomous concrete crack inspection system is necessary for preventing hazardous incidents arising from deteriorated concrete surfaces. In this paper, we represent a concrete crack detection framework to aid the process of automated inspection. The proposed approach employs a deep convolutional neural network architecture for crack segmentation from concrete image. The proposed network alleviates the effect of gradient vanishing problem present in deep neural network architectures. A feature silencing module is incorporated in the crack detection framework, for eliminating unnecessary feature maps from the network. The overall performance of the network significantly improves as a result. Experimental results support the benefit of incorporating feature silencing within a convolutional neural network architecture for improving the network’s robustness, sensitivity, and specificity. An added benefit of the proposed architecture is its ability to accommodate for the trade-off between specificity (positive class detection accuracy) and sensitivity (negative class detection accuracy) with respect to the target application. Furthermore, the proposed framework achieves a high precision rate and processing time than crack detection architectures present in literature.

We present a method of effectively concealing data in two quantization levels representing blocks based on Absolute Moment Block Truncation Coding (AMBTC) using Hamming code. The reason for choosing AMBTC as the cover media is that AMBTC is not only easily compressible by simple arithmetic operations, but is also efficient for exchanging data in small portable terminals, such as smart devices, because compression efficiency and image quality are satisfactory. AMBTC is expressed in the form of a $trio (a, b, BM)$, where $a$ and $b$ are quantization levels and BM is a bitmap. The quantization level is a pixel value used as a representative value when dividing an image into $4 \times 4$ blocks. Bai \& Chang introduced a method of hiding data using Hamming code. However, this method presented a problem with efficiency compared to the existing methods. In this paper, in order to improve the problem of this method, we minimize the error that occurs when concealing the data using the optimized Hamming code lookup table. We verified that the performance of the proposed method is satisfactory in terms of embedding capacity and quality of the image through sufficient experimental results.

COVID-19 represents an unprecedented threat to global public health and economies. Assays are urgently needed for rapid detection and diagnosis of SARS-CoV-2-infected patients in order to inform treatment and quarantine strategies. Establishing globally accepted easy-to-access diagnostic tests is extremely important to understanding the epidemiology of the present pandemic. While nucleic acid-based tests are considered to be more sensitive with respect to serological tests, but the present gold standard RT-PCR-based assays possess limitations such as low sample throughput, requirement for sophisticated reagents and instrumentation. To overcome these shortcomings, recent efforts of incorporating LAMP-based isothermal detection, and minimizing the number of reagents required are on rise. Novel CRISPR- and other nuclease-based techniques, when merge with isothermal and allied technologies, promises to provide sensitive and rapid detection of SARS-CoV-2 nucleic acids. Here we discuss and present compilation of state-of-the-art CRISPR based detection techniques for use in COVID diagnosis and epidemiology.

We propose a novel data hiding method in an audio host with a compressive sampling technique. An over-complete dictionary represents a group of the watermark. Each row of the dictionary is a Hadamard sequence representing multiple bits of the watermark. Then, the singular values of segment-based host audio in a diagonal matrix multiply by the over-complete dictionary producing a lower size matrix. At the same time, we embed the watermark into the compressed audio. In the detector, we detect the watermark and reconstruct the audio. This proposed method offers not only hiding the information but also compressing the audio host. The application of the proposed method is a broadcast monitoring and biomedical signal recording. We can mark and secure the signal content by hiding the watermark inside the signal while we compress the signal for memory efficiency. We evaluate the performance in terms of payload, compression ratio, audio quality, and watermark quality. The proposed method can hide the data imperceptibly, in range 729-5292 bps with compression ratio 1.47-4.84 and perfect detected watermark.

Cyber security has recently received enormous attention in today’s security concerns, due to the popularity of the Internet-of-Things (IoT), the tremendous growth of computer networks, and the huge number of relevant applications. Thus, detecting various cyber-attacks or anomalies in a network and building an effective intrusion detection system that performs an essential role in today’s security is becoming more important. Artificial intelligence, particularly machine learning techniques, can be used for building such a data-driven intelligent intrusion detection system. In order to achieve this goal, in this paper, we present an Intrusion Detection Tree (“IntruDTree”) machine-learning-based security model that first takes into account the ranking of security features according to their importance and then build a tree-based generalized intrusion detection model based on the selected important features. This model is not only effective in terms of prediction accuracy for unseen test cases but also minimizes the computational complexity of the model by reducing the feature dimensions. Finally, the effectiveness of our IntruDTree model was examined by conducting experiments on cybersecurity datasets and computing the precision, recall, fscore, accuracy, and ROC values to evaluate. We also compare the outcome results of IntruDTree model with several traditional popular machine learning methods such as the naive Bayes classifier, logistic regression, support vector machines, and k-nearest neighbor, to analyze the effectiveness of the resulting security model.

The recent worldwide outbreak of the novel corona-virus (COVID-19) opened up new challenges to the research community. Artificial intelligence (AI) driven methods can be useful to predict the parameters, risks, and effects of such an epidemic. Such predictions can be helpful to control and prevent the spread of such diseases. The main challenges of applying AI is the small volume of data and the uncertain nature. Here, we propose a shallow Long short-term memory (LSTM) based neural network to predict the risk category of a country. We have used a Bayesian optimization framework to optimized and automatically design country-specific networks. We have combined the trend data and weather data together for the prediction. The results show that the proposed pipeline outperforms against state-of-the-art methods for 170 countries data and can be a useful tool for such risk categorization. The tool can be used to predict long-duration outbreak of such an epidemic such that we can take preventive steps earlier.

The COVID-19 pandemic caused by SARS-COV-2 has infected over 500,000 people causing over 25,000 deaths in the last 10 weeks. A key host cellular protein required for the virus entry is angiotensin-converting enzyme 2 (ACE2). Recent studies have reported that patients with hypertension and diabetes treated with ACE inhibitors or angiotensin receptor blockers might be at a higher risk of COVID-19 infection as these drugs have been reported to increase ACE2 expression. This has raised the need to systematically investigate the effect of different drugs including antihypertensives on modulating ACE2 expression. Here, we analyzed a publicly available CMAP dataset of pre/post transcriptomic profiles for drug treatment in cell lines for over 20,000 small molecules. We show that only one subclass of antihypertensives drugs - ACE inhibitors, are significantly enriched for drugs up-regulating ACE2 expression. Studying the effects of the 672 clinically approved drugs in CMAP, we chart the drug categories that affect ACE2 expression. Specifically, we find that panobinostat (an HDAC inhibitor) confers the highest up-regulation of ACE2 expression while isotretinoin (a vitamin A derivative) is its strongest down-regulator. Our results provide initial candidates guiding further in vitro and in vivo studies aimed at assessing drug effects on ACE2 expression.

The recent outbreak and spread of the COVID-19 virus infection across the world has seen a massive global system-wide shutdown of human social and economic activity. Both developed and developing nations have been forced to contain and isolate their citizens as much as possible. However, the continuous rising cases in both categories of nations, especially those with poor or nonexistent testing facilities and healthcare systems pose a hidden danger. The seemingly lack of and access to a truly global concerted research effort in both temporary but effective symptom mitigation may lead to more deaths in infected cases. We propose that a fusion of both technological and home-grown solutions can be utilized effectively to manage symptoms. This would add to the preventive methods of social distancing, isolation, quarantine and frequent handwashing to halt the impact of the disease. We also hope to spur further research in such drug/non-drug combination therapy-based methods with emphasis on effectiveness based on quality of nutrient sources.

SARS-CoV-2 is the betacoronavirus responsible for the COVID-19 pandemic. It was listed as a potential global health threat by WHO due to high mortality, high basic reproduction number and lack of clinically approved drugs and vaccines for COVID-19. The genomic sequence of the virus responsible for COVID-19, as well as the experimentally determined three dimensional structure of the Main protease (Mpro) are available. The reported structure of the target Mpro was utilized in this study to identify potential drugs for COVID-19 using molecular docking based virtual screening of all approved drugs. The results of this study confirm preliminary reports that some of the drugs approved for treatment of other viral infections have the potential for treatment of COVID-19. Selected antiviral drugs, approved for human therapeutic applications, were ranked for potential effectiveness against COVID-19, based on predicted binding energy to the target Mpro of SARS-CoV-2, and novel candidates for drug repurposing were identified in this study. In addition, potential mechanisms for beneficial off target effects of some drugs in clinical trials were identified by using molecular docking.

Background: Cigarette smoking (CS) is a global public health problem and a high-risk factor for various diseases. In December 2019, a novel coronavirus (HCoV-19) was identified in Wuhan, China. Because ACE2 has been identified as a receptor for HCoV-19, we hypothesize that CS affects the expression pattern of ACE2 in respiratory tract, causing differences in susceptibility to the virus. Methods: Three datasets (GSE994, GSE17913, and GSE18344), were downloaded from the Gene Expression Omnibus (GEO) database. Correlation and enrichment analysis were used to evaluate the function of ACE2. Also, the different expression of ACE2 in different groups of three datasets were analyzed. Results: Genes associated with ACE2 were enriched in important biological processes such as viral processes and immune response. Elevated ACE2 were found in intrapulmonary airways (GSE994) and oral epithelial cells (GSE17913) of smokers but not those of non-smokers or former smokers. Significant dose- and time-dependent relationships between CS and ACE2 expression were observed in mouse lung tissues, and long periods without smoking were found to significantly reduce ACE2 expression. Conclusions: Both human and rat data confirmed that CS could induce increased ACE2 in the respiratory tract, indicating that smokers have a higher susceptibility to HCoV-19.

Bio-devices are designed to allow biological matter to perform in vitro almost the same functions it performs in vivo. Therefore, they can benefit from the specificities of such materials and are expected to perform better than traditional devices. On the other hand, the integration of biological material with electronic/electrochemical instrumentation requires careful attention and can produce unconventional results. In this paper, we describe the impedance response of an electrochemical cell that converts sunlight into electrical power. It uses the photosynthetic system known as Reaction Center, which is the core of photosynthesis in several living beings. Under illumination, an abrupt transformation drives the cell electrical response from insulator to conductor and a photocurrent is observed. The impedance spectrum shows a peculiar shape which significantly modifies with the protein activation. It has been analyzed by means of a graphical/analytical/ numerical procedure. The modelling identifies an analogue electrical circuit, whose parameters give quantitative information about the underlying process. Finally, an appropriate normalization of data is proposed which validates data in dark and light and can be useful as a fast screening of measurements.

A novel coronavirus called 2019-nCoV was recently found in Wuhan, Hubei Province of China, and now is spreading across China and other parts of the world. 2019-nCoV spreads more rapidly than SARS-CoV. Unfortunately, there is no drug to combat the virus. It is of high significance to develop a drug that can combat the virus effectively before the situation gets worse. It usually takes a much longer time to develop a drug using traditional methods. For 2019-nCoV, it is now better to rely on some alternative methods to develop drugs that can combat such a disease effectively since 2019-nCoV is highly homologous to SARS-CoV. In this paper, we first collected virus RNA sequences from the GISAID database, translated the RNA sequences into protein sequences, and built a protein 3D model using homology modeling. Coronavirus main protease is considered to be a major therapeutic target, thus this paper focused on drug screening based on the modeled 2019-nCov_main_protease structure. The deep learning based method DFCNN, developed by our group, can identify/rank the protein-ligand interactions with relatively high accuracy. DFCNN is capable of performing virtual screening quickly since no docking or molecular dynamic simulation is needed. DFCNN identifies potential drugs for 2019-nCoV protease by performing drug screening against 4 chemical compound databases. Also, we performed drug screening for all tripeptides against the binding site of 2019-nCov_main_protease since peptides often show better stability, more bio-availability and negligible immune responses. In the end, we provided the list of possible chemical ligands and peptide drugs for experimental validation.

Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) is a devastating illness whose biomedical basis is now beginning to be elucidated. We reported previously that, after recovery from frozen storage, lymphocytes (peripheral blood monocytic cells, PBMCs) from ME/CFS patients die faster in culture medium than those from healthy controls. We also found that lymphoblastoid cell lines (lymphoblasts) derived from these PBMCs exhibit multiple abnormalities in mitochondrial respiratory function and signalling activity by the cellular stress-sensing kinase TORC1. These differences were correlated with disease severity, as measured by the Richardson and Lidbury Weighted Standing Test. The clarity of the differences between these cells derived from ME/CFS patient blood and those from healthy controls suggested that they may provide useful biomarkers for ME/CFS. Here we report a preliminary investigation into that possibility using a variety of analytical classification tools, including linear discriminant analysis, logistic regression and Receiver Operating Characteristic (ROC) curve analysis. We found that results from three different tests, lymphocyte death rate, mitochondrial respiratory function and TORC1 activity could each individually serve as biomarker with better than 90% sensitivity but only modest specificity vís a vís healthy controls. However, in combination they provided a cell-based biomarker with sensitivity and specificity approaching 100% in our sample. This level of sensitivity and specificity was almost equalled by a suggested protocol in which the frozen lymphocyte death rate was used as a highly sensitive test to triage positive samples to the more time consuming and expensive tests measuring lymphoblast respiratory function and TORC1 activity. This protocol provides a promising biomarker that could assist in more rapid and accurate diagnosis of ME/CFS.

An iterative outlier elimination procedure based on hypothesis testing, commonly known as Iterative Data Snooping (IDS) among geodesists, is often used for the quality control of the modern measurement systems in geodesy and surveying. The test statistic associated with IDS is the extreme normalised least-squares residual. It is well-known in the literature that critical values (quantile values) of such a test statistic cannot be derived from well-known test distributions, but must be computed numerically by means of Monte Carlo. This paper provides the first results about Monte Carlo-based critical value inserted to different scenarios of correlation between the outlier statistics. From the Monte Carlo evaluation, we compute the probabilities of correct identification, missed detection, wrong exclusion, overidentifications and statistical overlap associated with IDS in the presence of a single outlier. Based on such probability levels we obtain the Minimal Detectable Bias (MDB) and Minimal Identifiable Bias (MIB) for the case where IDS is in play. MDB and MIB are sensitivity indicators for outlier detection and identification, respectively. The results show that there are circumstances that the larger the Type I decision error (smaller critical value), the higher the rates of outlier detection, but the lower the rates of outlier identification. For that case, the larger the Type I Error, the larger the ratio between MIB and MDB. We also highlight that an outlier becomes identifiable when the contribution of the measures to the wrong exclusion rate decline simultaneously. In that case, we verify that the effect of the correlation between the outlier statistics on the wrong exclusion rates becomes insignificant from a certain outlier magnitude, which increases the probability of identification.

With the rapid development of Internet and the widely usage of smart devices, massive multimedia data are generated, collected, stored and shared on the Internet. This trend makes cross-modal retrieval problem become a hot issue in this years. Many existing works pay attentions on correlation learning to generate a common subspace for cross-modal correlation measurement, and others uses adversarial learning technique to abate the heterogeneity of multi-modal data. However, very few works combine correlation learning and adversarial learning to bridge the inter-modal semantic gap and diminish cross-modal heterogeneity. This paper propose a novel cross-modal retrieval method, named ALSCOR, which is an end-to-end framework to integrate cross-modal representation learning, correlation learning and adversarial. CCA model, accompanied by two representation model, VisNet and TxtNet is proposed to capture non-linear correlation. Beside, intra-modal classifier and modality classifier are used to learn intra-modal discrimination and minimize the inter-modal heterogeneity. Comprehensive experiments are conducted on three benchmark datasets. The results demonstrate that the proposed ALSCOR has better performance than the state-of-the-arts.

This research aims to determine the similarities in groups of people to build a film recommender system for users. Users often have difficulty in finding suitable movies due to the increasing amount of movie information. The recommender system is very useful for helping customers choose a preferred movie with the existing features. In this study, the recommender system development is established by using several algorithms to obtain groupings, such as the K-Means algorithm, birch algorithm, mini-batch K-Means algorithm, mean-shift algorithm, affinity propagation algorithm, agglomerative clustering algorithm, and spectral clustering algorithm. We propose methods optimizing K so that each cluster may not significantly increase variance. We are limited to using groupings based on Genre and, Tags for movies. This research can discover better methods for evaluating clustering algorithms. To verify the quality of the recommender system, we adopted the mean square error (MSE), such as the Dunn Matrix and Cluster Validity Indices, and social network analysis (SNA), such as Degree Centrality, Closeness Centrality, and Betweenness Centrality. We also used Average Similarity, Computational Time, Association Rule with Apriori algorithm, and Clustering Performance Evaluation as evaluation measures to compare method performance of recommender systems using Silhouette Coefficient, Calinski-Harabaz Index, and Davies-Bouldin Index.

Non-enzymatic glucose sensing is a crucial field of study because of the current market demand. This study proposes a novel design of glucose sensor with enhanced selectivity and sensitivity by using graphene Schottky diodes, which is composed of Graphene/Platinum Oxide/n-Silicon heterostructure. The sensor was tested with different glucose concentrations and interfering solutions to investigate its sensitivity and selectivity. Different structures of the device were studied by adjusting the platinum oxide film thickness to investigate its catalytic activity. It was found that the film thickness plays a significant role in the efficiency of glucose oxidation and hence in overall device sensitivity. Moreover, theoretical investigations were conducted using Density Function Theory (DFT) to better understand the detection method and the origins of selectivity. The working principle of the sensors puts it in a competitive position with other non-enzymatic glucose sensors. DFT calculations provided a qualitative explanation of the charges distributed across the graphene sheet within a system of a platinum substrate with D-glucose molecules above. The proposed graphene/PtO/n-Si heterostructure has proven to satisfy these factors, which opens the door for further developments of more reliable non-enzymatic glucometers for continuous glucose monitoring systems.

The most cited evidence for (nonbaryonic) dark matter has been an apparent lack of visible mass to gravitationally support the observed orbital velocity of matters in rotating disk galaxies. Yet measurement of the mass of celestial objects cannot be straightforward, requiring theories derived from the known physical laws along with some empirically established semi-quantitative relationship. The most reliable means for determining the mass distribution in rotating disk galaxies is to solve a force balance equation according to Newton’s laws from measured rotation curves, similar to calculating the Sun’s mass from the Earth’s orbital velocity. Another common method to estimate galactic mass distribution is to convert measured brightness from surface photometry based on empirically established mass-to-light ratio. For convenience, most astronomers commonly assumed a constant mass-to-light ratio for estimation of the so-called “luminous” or “visible” mass, which should not be expected accurate. The mass determined from rotation curve typically exhibit an exponential-like decline with galactrocentric distance, qualitatively consistent with observed surface brightness. This fact scientifically suggests variable mass-to-light ratio of baryonic matter in galaxies without the need for dark matter.

New modied Hayward metric of magnetically charged non-singular black hole spacetime in the framework of nonlinear electrodynamics is constructed. When the fundamental length introduced, characterising quantum gravity effects, vanishes one comes to the general relativity coupled with the Bronnikov model of nonlinear electrodynamics. The metric can have one (an extreme) horizon, two horizons of black holes, or no horizons corresponding to the particle-like solution. Corrections to the Reissner-Nordström solution are found as the radius approaches to innity. As r -> 0 the metric has a de Sitter core showing the absence of singularities. The asymptotic of the Ricci and Kretschmann scalars are obtained and they are nite everywhere. The thermodynamics of black holes, by calculating the Hawking temperature and the heat capacity, is studied. It is demonstrated that phase transitions take place when the Hawking temperature possesses the maximum. Black holes are thermodynamically stable at some range of parameters.

We propose a 10-Gb/s 64-quadrature amplitude modulation (QAM) signal-based Radio over Fiber (RoF) system for 50 km of standard single mode fiber length which utilizes Reinforcement Learning (RL) SARSA based decision method to indicate an effective decision which mitigates nonlinearity. By utilizing RL-SARSA algorithm, the results demonstrate that significant reduction can be obtained in terms of bit error rate.

Purpose: Localization and mapping with LiDAR data is a fundamental building block for autonomous vehicles. Though LiDAR point clouds can often encode the scene depth more accurate and steadier compared with visual information, laser-based Simultaneous Localization And Mapping (SLAM) remains challengeable as the data is usually sparse, density variable and less discriminative. The purpose of this paper is to propose an accurate and reliable laser-based SLAM solution. Design/methodology/approach: The method starts with constructing voxel grids based on the 3D input point cloud. These voxels are then classified into three types to indicate different physical objects according to the spatial distribution of the points contained in each voxel. A global environment model with Partition of Unity (POU) implicit surface is maintained along the process and located voxels are merged into it from stage to stage, through scan-to-model matching implemented by Levenberg-Marquardt method. Findings: We find a laser-based SLAM method. The method uses POU implicit surface representation to build the model and is evaluated on the KITTI odometry benchmark without loop closure. Experimental results indicate that the method achieves accuracy comparable to the state-of-the-art methods. Originality/value: We propose a novel, low-drift SLAM method, which falls into a scan-to-model matching paradigm, operates on point clouds obtained from Velodyne HDL64. The method is of value to researchers developing SLAM systems for autonomous vehicles.

A smart city is a futuristic approach that evolves with new technologies. It can start as a simple community and evolve into future cities. In most developing countries, where the population growth is faster, and where the organization and the urbanization are slower, there is a serious need for a framework for progressive change towards sustainable cities. This article discusses the level of intelligence of smart city components and proposes indicators as well as a methodology for measuring intelligence based on the objectives to be achieved as well as a certain number of technical requirements and some cognitive processes implemented.

The Internet of Things (IoT) is an emerging technology that aims to enable the interconnection of a large number of smart devices and heterogeneous networks. Ad hoc networks play an important role in the designing of IoT-enabled platforms due to their efficient, flexible, low-cost, and dynamic infrastructures. These networks utilize the available resources efficiently to maintain the Quality of Service (QoS) in a multi-hop communication. However, in a multi-hop communication, the relay nodes can be malicious, thus requiring a secured and reliable data transmission. In this paper, we propose a QoS-aware secured communication scheme for IoT-based networks (QoS-IoT). In QoS-IoT, a Sybil attack detection mechanism is used for the identification of Sybil nodes and their forged identities in multi-hop communication. %by high-power and mobile nodes. After Sybil nodes detection, an optimal contention window (CW) is selected for QoS provisioning, i.e., to achieve per-flow fairness and efficient utilization of the available bandwidth. In a multi-hop communication, the MAC layer protocols do not perform well in terms of fairness and throughput, especially when the nodes generate a large amount of data. It is because the MAC layer has no capability of providing QoS to prioritized or forwarding flows. We evaluate the performance of QoS-IoT in terms of Sybil attack detection, fairness, throughput, and buffer utilization. The simulation results show that the proposed scheme outperforms the existing schemes and significantly enhances the performance of the network with a large volume of data. Moreover, the proposed scheme is resilient against Sybil attack.

In this paper, a new class of q-Hermite based Frobenius type Eulerian polynomials is introduced by means of generating function and series representation. Several fundamental formulas and recurrence relations for these polynomials are derived via different generating methods. Furthermore, diverse correlations including the q-Apostol-Bernoulli polynomials, the q-Apostol-Euler poynoomials, the q-Apostol-Genocchi polynomials and the q-Stirling numbers of the second kind are also established by means of the their generating functions.

We introduce a new kind of extended Hermite-based Frobenius type Eulerian polynomials and then derive diverse explicit and implicit summation equations including some symmetric formulas by utilizing series manupulation method. Multifarious summation formulas and identities given earlier for some well known polynomials such as Eulerian polynomials and Frobenius type Eulerian polynomials are generalized.

This paper describes a new approach that can be used to determine the mechanical properties of unknown materials and complex material systems. The approach uses inverse finite element modelling (FEM) accompanied with a designed algorithm to obtain the modulus of elasticity, yield stress and strain hardening material constants of an isotropic hardening material model, as well as the material constants of the Drucker-Prager material model (modulus of elasticity, cap yield stress and angle of friction). The algorithm automatically feeds the input material properties data to finite element software and automatically runs simulations to establish a convergence between the numerical loading-unloading curve and the target data obtained from continuous indentation tests using common indenter geometries. A further module was developed to optimise convergence using an inverse FEM analysis interfaced with a non-linear MATLAB algorithm. A sensitivity analysis determined that the dual Spherical and Berkovich (S&B) approach delivered better results than other dual indentation methods such as Berkovich and Vickers (B&V) and Vickers and Spherical (V&S). It was found that better convergence values can be achieved despite a large variation in the starting parameter values and / or material constitutive model and such behaviour reflects the uniqueness of the dual S&B indentation in predicting complex material systems. The study has shown that a robust optimization method based on a non-linear least-squares curve fitting function (LSQNONLIN) within MATLAB and ABAQUS can be used to accurately predict a unique set of elastic plastic material properties and Drucker-Prager material properties. This is of benefit to the scientific investigation of properties of new materials or obtaining the material properties at different location of a part which might be not be similar due to manufacturing processes (e.g. different heating and cooling rates at different locations).

A crucial role is played by personal biomedical data when it comes to maintaining proficient access to health records by patients as well as health professionals. However, it is difficult to get a unified view pertaining to health data that have been scattered across various health center/hospital sections. To be specific, health records are distributed across many places and cannot be found integrated easily. In recent years, blockchain is regarded as a promising explanation that helps to achieve individual biomedical information sharing in a secured way along with privacy preservation, because of its benefit of immutability. This research work put forwards a blockchain-based managing scheme that helps to establish interpretation improvements pertaining to electronic biomedical systems. In this scheme, two blockchain were employed to construct the base of it, where the second blockchain algorithm is used to generate a secure sequence for the hash key that generated in first blockchain algorithm. The adaptively feature enable the algorithm to use multiple data types and combine between various biomedical images and text records as well. All the data, including keywords, digital records as well as the identity of patients are private key encrypted along with keyword searching capability so as to maintain data privacy preservation, access control and protected search. The obtained results which show the low latency (less than 750 ms) at 400 requests / second indicate the ability to use it within several health care units such as hospitals and clinics.

We talk about random when it is not possible to determine a pattern on the observed outcomes. A computer follows a sequence of fixed instructions to give any of its output, hence the difficulty of choosing numbers randomly from algorithmic approaches. However, some algorithms based on mathematical formulas like the Linear Congruential algorithm and the Lagged Fibonacci generator appear to produce "true" random sequences to anyone who does not know the secret initial input [1]. Up to now, we cannot rigorously answer the question on the randomness of prime numbers [2, page 1] and this highlights a connection between random number generator and the distribution of primes. From [3] and [4] one sees that it is quite naive to expect good random reproduction with prime numbers. We are, however, interested in the properties underlying the distribution of prime numbers, which emerge as sufficient or insufficient arguments to conclude a proof by contradiction which tends to show that prime numbers are not randomly distributed. To achieve this end, we use prime gap sequence variation. The algorithm that we produce makes possible to deduce, in the case of a binary choice, a uniform behavior in the individual consecutive occurrence of primes, and no uniformity trait when the occurrences are taken collectively.

Runtime verification (RV) is a lightweight approach to detecting temporal errors of system at runtime. It confines the verification on observed trajectory which avoids state explosion problem.To predict the future violation, some work proposed the predictive RV which uses the information from models or static analysis. But for software whose models and codes cannot be obtained, or systems running under uncertain environment, these predictive methods cannot take effect. Meanwhile, RV in general takes multi-valued logic as the specification languages, for example the " true, false and inconclusive" in three-valued semantics. They cannot give accurate quantitative description of correctness when "inconclusive" is encountered. We in this paper present a RV method which learns probabilistic model of system and environment from history traces and then generates probabilistic runtime monitor to quantitatively predict the satisfaction of temporal property at each runtime state. In this approach, Hidden Markov Model (HMM) is firstly learned and then transformed to Discrete Time Markov Chain (DTMC). To construct incremental monitor, the monitored LTL property is translated into Deterministic Rabin Automaton (DRA). The final probabilistic monitor is obtained by generating the product of DTMC and DRA, and computing the probabilities for each state. With such method, one can give early warning once the probability of correctness is lower than pre-defined threshold, and have the chance to do adjustment in advance. The method has been implemented and experimented on real UAS (Unmanned Aerial Vehicle) simulation platform.

Improving the efficiency of the supply process in prefabricated components is challenging and requires accounting for a variety of risks involved in the management of the suppliers. The purpose of this study is to present a method to account for the systematic trade-offs between several supplier alternatives. A novel framework is presented for the whole assessment of supplier alternatives by taking advantage of the information extracted from customized building information modeling (BIM) and a database required for assessment of impacts. A data library related to assessment criteria for supply alternatives is built to facilitate the storage and sharing of information. Analytic hierarchy process (AHP) is used to select the optimal supplier that is able to provide the most satisfaction for the determined criteria. The proposed framework was also illustrated by the implementation in a mega project. The study implication is that BIM-enabled supplier selection can indeed lead to more benefits and higher values for all stakeholders.

Multiply-accumulate calculations using a memristor crossbar array is an important method to realize neuromorphic computing. However, the memristor array fabrication technology is still immature, and it is difficult to fabricate large-scale arrays with high-yield, which restricts the development of memristor-based neuromorphic computing technology. Therefore, cascading small-scale arrays to achieve the neuromorphic computational ability that can be achieved by large-scale arrays, which is of great significance for promoting the application of memristor-based neuromorphic computing. To address this issue, we present a memristor-based cascaded framework with some basic computation units, several neural network processing units can be cascaded by this means to improve the processing capability of the dataset. Besides, we introduce a split method to reduce pressure of input terminal. Compared with VGGNet and GoogLeNet, the proposed cascaded framework can achieve 93.54% Fashion-MNIST accuracy under the 4.15M parameters. Extensive experiments with Ti/AlOx/TaOx/Pt we fabricated are conducted to show that the circuit simulation results can still provide a high recognition accuracy, and the recognition accuracy loss after circuit simulation can be controlled at around 0.26%.

The identification of bloodstain is one of the most important approaches in obtaining evidence in criminalistics. A threshold method based on spectral co-efficient and interclass variance is proposed in this paper, it is a non-contact, non-destructive method for quickly identifying bloodstains. The spectra of bloodstains and other suspected substances were all extracted from their hyper-spectral image. Then calculate the correlation coefficients of these spectral and interclass variances, analyze the differences between substances. The best blood recognition threshold was determined as 0.9. After preprocessing for eliminating systematic errors, experiments with the threshold 0.9 are carried out to identify bloodstains on the calico and red T-shirt. The method can remarkably identify the bloodstain from other non-blood substances both quickly and efficiently. The blood extraction rate can reach to 93.35% and 89.19%, respectively. It is an important step toward the implementation of bloodstain non-contact and non-destructive identification in forensic casework.

The construction industry is one of the most fatal industries, so it is important to pay more attention to safety solutions. Even though work-related accidents are known as major waste in construction projects, little attention has been paid so far to incorporating safety into the lean construction framework. In this research, lean construction theory is reviewed through the lens of safety. That being so, the identified challenges in previous research on improving safety in construction projects are categorized and those related to the concept of lean project delivery are introduced. Then, the principles of the lean construction framework are explained and the relevant changes for incorporating safety into the framework are introduced and discussed. It is expected that this hybrid model would further enrich the lean construction framework. The careful attention of project executives to this model may improve the safety situation in construction projects.

With the recent developments in augmented reality (AR) technologies comes an increased interest in the use of smart glasses for hands-on training. Whether this interest is turned into market success or not depends at the least on whether the interaction with smart AR glasses satisfies users, an aspect of AR use that so far has received little attention. With this contribution, we seek to change this. The objective of the article, therefore, is to investigate user satisfaction in AR applied to three cases of practical use. User satisfaction of AR can be broken down into satisfaction with the interaction and satisfaction with the delivery device. A total of 142 participants from three different industrial sectors contributed to this study, namely, aeronautics, medicine, and astronautics. In our analysis, we investigated the influence of different factors, such as age, gender, level of education, level of Internet knowledge, and the roles of the participants in the different sectors. Even though users were not familiar with the smart glasses, results show that general computer knowledge has a positive effect on user satisfaction. Further analysis using two-factor interactions shows that there is no significant interaction between the different factors and user satisfaction. The results of the study affirm that the questionnaires developed for user satisfaction of smart glasses and the AR application performed well, but leave room for improvement.

Augment reality (AR) is crucial for immersive human-computer interaction (HCI) and vision of artificial intelligence (AI). Labeled data drove object recognition in AR. However, manual annotating data is expensive and labor-intensive, and furthermore, scanty labeled data limits the application of AR. Aiming at solving the problem of insufficient training data in AR object recognition, an automated vision data synthesis method called BAGAN is proposed in this paper based on the 3D modeling and GAN algorithm. Our approach has been validated to have better performance than other methods through image recognition task on natural image database ObjectNet3D. This study can shorten the algorithm development time of AR and expand the application scope of AR, which is of great significance to immersive interactive systems.

The present work aims at the comprehensive application of stochastic and optimization tools with the support of Information and Communication Technologies (ICT) through a case study in a logistics process for electronic goods; simulation and Response Surface Methodology (RSM) are applied for this purpose. The problem to be evaluated is to define an optimal distribution cost for products shipped to wholesale customers located in different cities in Mexico from a manufacturing plant in Tijuana, Mexico. The factors under study are the product allocation for each distribution center, finished good inventory level and on time deliveries, which are supposed to be significant to get the objective. The methodology applied for this problem considers the design of a discrete event simulation model to represent virtually the real life of logistics process, which is considered a complex system due to different activities are interrelated to carry it out. This model is used to execute the different experiments proposed by the RSM. The results obtained from simulation model were analyzed with the RSM to define the mathematical model that allows identifying the parameters of the factors in order to optimize the process. The findings prove how the ICT facilitate the application of stochastic tools with the purpose of process optimization.

People localization is a key building block in many applications. In this paper, we propose a deep learning based approach that significantly improves the localization accuracy and reduces the runtime of Wi-Fi based localization systems. Three variants of the deep learning approach are proposed, a sub-task architecture, an end-to-end architecture, and an architecture that incorporates prior knowledge. The performance of the three architectures under different conditions is evaluated and the significant improvement of the three architectures over existing approaches is demonstrated.

Multi-receiver encryption enables a sender to encrypt a message and transmit the ciphertext to a set of authorized users, while no one out this group of authorized users can decrypt the message. Multi-receiver encryption is of great importance in many sectors such as broadcast communication, cloud computing, wireless communications, networking applications, e-voting, lottery, and medical applications. This paper proposes an efficient multi-receiver public key encryption scheme based on Lucas sequences. The results of the computational analysis show that, projected scheme is better against renown attacks and prevailing anonymous multireceiver algorithms

Extraction of high-resolution surface waves is essential in surface-wave survey. Because reflections usually interfere with surface waves on X component in a multicomponent seismic exploration, it is difficult to extract dispersion curves of surface waves. The situation goes more serious when the frequencies and velocities of higher-mode surface waves are close to those of PS-waves. A method for surface-wave extraction is proposed based on the morphological differences between reflections and surface waves. Frequency-domain high-resolution linear Radon transform (LRT) and time-domain high-resolution hyperbolic Radon transform (HRT) are used to represent surface waves and reflections respectively. Then, the sparse representation problem based on the morphological component analysis (MCA) is built and optimally solved to obtain high-fidelity surface waves. An advantage of our method is its ability to extract surface waves when their frequencies and velocities are close to those of reflections. Furthermore, results of synthetic and field examples confirm that the proposed method can attenuate the distortion of surface-wave dispersive energy caused by reflections, which contributes to extracting accurate dispersion curves.

Land consolidation engineering inevitably interferes with terrestrial ecosystems, leading to natural capital loss. Therefore, conducting an ecological sensitivity evaluation of a project area before consolidation engineering is very important for reducing unnecessary human interference. Conservation of terrestrial ecosystems and the biodiversity therein to the greatest possible extent is urgently needed. This research analyzes the interference by human activities caused by land consolidation engineering in terrestrial ecosystems. GIS technology, ecological values, landscape pattern indexes, and an ecological risk evaluation were used to construct an ecological sensitivity evaluation index. The coefficient of variation method and a comprehensive sensitivity rating evaluation were used to calculate the weights and results. The project area was divided into sensitivity zones according to the results, and the results and suggestions are as follows: In the highly eco-sensitive zone, where bare rocks, gravel, and grass-covered areas compose the main landscape type, vegetation should be restored, and forests should be planted. In the medium eco-sensitivity zone, where irrigated paddy fields and arid land compose the main landscape type, land parcels should be merged, and agricultural infrastructure should be constructed or improved. In the low eco-sensitivity zone, where forests compose the main landscape type, roads should be closed, natural habitat should be restored, and buffer zones should be created. This study provides suggestions for future land management decisions.

The operations of digitization, transmission and storage of medical data, particularly images require increasingly effective encoding methods not only in terms of compression ratio and flow of information but also in terms of visual quality. At first, there was DCT (discrete cosine transform) then DWT (discrete wavelet transform) and their associated standards in terms of coding and image compression. After that, the 2nd generation wavelets seeks to be positioned and confronted to the image and video coding methods currently used. It is in this context that we suggested a method combining bandelets and SPIHT (set partitioning in hierarchical trees) algorithm. There are two main reasons for our approach: the first lies in the nature of the bandelet transform to take advantage by capturing the geometrical complexity of the image structure. The second reason stems in the suitability of encoding the bandelet coefficients by the SPIHT encoder. Quality measurements shows that in some cases (for low bit rates) the performances of the proposed coding compete with the well-established ones and opens up new application prospects in the field of medical imaging.

This paper discusses the computer-aided (CAD) classification between Hepatocellular Carcinoma (HCC), i.e., the most common type of liver cancer, and Liver Abscess, based on ultrasound image texture features and Support Vector Machine (SVM) classifier. Among 79 cases of liver diseases, with 44 cases of HCC and 35 cases of liver abscess, this research extracts 96 features of Gray-Level Co-occurrence Matrix (GLCM) and Gray-Level Run-Length Matrix (GLRLM) from the region of interests (ROIs) in ultrasound images. Three feature selection models, i) Sequential Forward Selection, ii) Sequential Backward Selection, and iii) F-score, are adopted to determine the identification of these liver diseases. Finally, the developed system can classify HCC and liver abscess by SVM with the accuracy of 88.875%. The proposed methods can provide diagnostic assistance while distinguishing two kinds of liver diseases by using a CAD system.

This paper presents the design, fabrication and characterization of Schottky erbium/silicon photodetectors working at 1.55 µm. These erbium/silicon junctions are carefully characterized using both electric and optical measurements at room temperature. A Schottky barrier ΦB of ~673 meV is extrapolated; the photodetectors show external responsivity of 0.55 mA/W at room temperature under a 8 V of reverse bias applied. In addition, the device performance is discussed in terms of normalized noise and noise equivalent power. To the best of our knowledge, these are the first Er/Si photodetectors designed for operation in free space at 1.55 µm. The proposed devices will pave the way towards development of Er-based photodetectors and light sources to be monolithically integrated in the same silicon substrate and both operating at 1.55 µm.

Antioxidant activity is an essential feature required for oxygen-sensitive merchandise and goods, such as food and corresponding packaging as well as materials used in cosmetics and biomedicine. For example, vanillin, one of the most prominent antioxidants, is fabricated from lignin, the second most abundant natural polymer in the world. Antioxidant potential is primarily related to the termination of oxidation propagation reactions through hydrogen transfer. The application of technical lignin as a natural antioxidant has not yet been implemented in the industrial sector, mainly due to the complex heterogeneous structure and polydispersity of lignin. Thus, current research focuses on various isolation and purification strategies to improve the compatibility of lignin material with substrates and enhancing its stabilizing effect. This contribution presents antioxidant capacity studies of various lignins depending on purification degree of the raw material. In detail, the antioxidant potential of lignin-based compounds is studied using the DPPH (2,2-diphenyl-1-picrylhydrazyl) assay. The purification procedure was monitored by thin layer chromatography (TLC) and showed that double-fold selective extraction is the most efficient purification procedure (confirmed by UV-Vis, FTIR, HSQC and 31P NMR spectroscopy, SEC and XRD analysis). Results are discussed regarding the dependency of antioxidant activity on lignin structure and biomass source. Thus, lignins obtained from industrial black liquor are compared with beech wood samples. In addition, the influence of lignin isolation (kraft versus organosolv) is discussed. Values of the antioxidant activity (DPPH inhibition) of kraft lignin fractions were 62-68% while beech and spruce/pine-mixed lignins showed values between 26, 64 and 42%, respectively. TPC values of the different isolated kraft lignin fractions varied between 26-35%, while beech, spruce/pine lignins were 34, 30 and 34%, respectively. Storage decreased the TPC values and increased the DPPH inhibition.

5G heterogeneous network overlaid by millimeter-wave (mmWave) access employs mmWave meshed backhauling as a promising cost-efficient backhaul architecture. Due to the nature of mobile traffic distribution in practice which is both time-variant and spatially non-uniform, dynamic construction of mmWave meshed backhaul is prerequisite to support the varying traffic distribution. Focusing on such scenario of outdoor dynamic crowd (ODC), this paper proposes a novel method to control mmWave meshed backhaul for efficient operation of mmWave overlay 5G HetNet through Software-Defined Network (SDN) technology. Our algorithm is featured by two functionalities, i.e., backhauling route multiplexing for overloaded mmWave small cell base stations (SC-BSs) and mmWave SC-BSs’ ON/OFF status switching for underloaded spot. In this paper, the effectiveness of the proposed meshed network is confirmed by both numerical analyses and experimental results. Simulations are conducted over a practical user distribution modeled from measured data in realistic environments. Numerical results show that the proposed algorithm can cope with the locally intensive traffic and reduce energy consumption. Furthermore, a WiGig (Wireless Gigabit Alliance certified) device based testbed is developed for Proof-of-Concept (PoC) and preliminary measurement results confirm the proposed dynamic formation of the meshed network’s efficiency.

"The wisdom of crowd'' is so often observed in social discourses and activities around us. The manifestations of it are, however, so intrinsically embedded and behaviorally accepted that an elaboration of a social phenomenon evidencing such wisdom is often cheered as a discovery; or at least an astonishing fact. One such scenario is explored here, namely conceptualization and modeling of a food safety system, a system directly related to social cognition. Food safety is an area of concern these days. Models representing the food safety systems are recently published to study the effect of interactions between important entities of the system. For example, Knowles’s model finds conditions leading to a more efficient and dependable system of entities like consumers, regulators and stores with specific focus on regulators behavior and their impact on the food safety. The first contribution of this paper is reevaluation of Knowles’s model towards a more conscious understanding of ``the wisdom of crowd'' effects on inspection and consuming behaviors. The second contribution is augmenting of the model with social networking capabilities, which acts as a medium to spread information about stores and help consumers find stores which are not contaminated. Simulation results reveal that stores’ respecting social cognition improve effectiveness of the food safety system for consumers and stores both. Simulation findings also reveals that an active society has a capability to self-organize effectively even in the absence of any regulatory compulsion.

In this study, a preload monitoring method using impedance signatures obtained from a piezoelectric-based smart interface is presented for bolted girder connections. Firstly, the background theory of the piezoelectric-based smart interface and its implementation into health monitoring of bolted connections are outlined. A simplified electro-mechanical (EM) impedance model of a smart interface-embedded bolted connection system is formulated to interpret mechanistic understanding of EM impedance signatures under the effect of bolt preload. Secondly, finite element modeling of a bolted connection is carried out to show the numerical feasibility of the presented method and to predetermine the sensitive frequency band of impedance signatures. Finally, impedance measurements are conducted on a lab-scaled bolted girder connection to verify the predetermined sensitive frequency range and to assess the bolt preload changes in the test structure.

The incidence of Severe Combined Immunodeficiency (SCID) in Manitoba, (1/15,000), is at least three to four times higher than the national average and that reported from other jurisdictions. It is overrepresented in two population groups: Mennonites (ZAP70 founder mutation) and First Nations of Northern Cree ancestry (IKBKB founder mutation). We have previously demonstrated that in these two populations the most widely utilized T-cell receptor excision circle (TREC) assay is an ineffective newborn screening test to detect SCID as these patients have normal numbers of mature T-cells. We have developed a semi-automated, closed tube, high resolution DNA melting procedure to simultaneously genotype both of these mutations from the same newborn blood spot DNA extract used for the TREC assay. Parallel analysis of all newborn screening specimens utilizing both TREC analysis and the high resolution DNA procedure should provide as complete ascertainment as possible of SCID in the Manitoba population.

The number of SIEM introduction is increasing in order to detect threat patterns in a short period of time with a large amount of structured/unstructured data, to precisely diagnose crisis to threats, and to provide an accurate alarm to an administrator by correlating collected information. However, it is difficult to quickly recognize and handle with various attack situations using a solution equipped with complicated functions during security monitoring. In order to overcome this situation, new detection analysis process has been required, and there is an effort to increase response speed during security monitoring and to expand accurate linkage analysis technology. In this paper, reflecting these requirements, we design and propose profiling auto-generation model that can improve the efficiency and speed of attack detection for potential threats requirements. we design and propose profiling auto-generation model that can improve the efficiency and speed of attack detection for potential threats.

The objective of the paper is to introduce new similarity measure for single valued neutrosophic sets based on logarithm function. We define logarithm similarity measure and their weighted similarity measure for single valued neutrosophic sets. Then we define hybrid logarithm similarity measure and weighted hybrid logarithm similarity measure for single valued neutrosophic sets. We prove the basic properties of the proposed measures. We then define an entropy function using logarithm function to determine unknown attribute weights. We develop a novel multi attribute group decision making strategy for single valued neutrosophic sets based on the weighted hybrid logarithm similarity measure. We address an illustrative example to demonstrate the effectiveness and aptness of the proposed strategies. We conduct a sensitivity analysis of the developed strategy. We also make a comparison between the obtained results from proposed strategies and different existing strategies in the literature.

Neutrosophic cubic set (NCS) is one of the important family members of neutrosophic hybrid sets. Neutrosophic cubic set has more strength than other family members of neutrosophic hybrid sets to express incomplete information due to the presence of interval valued neutrosophic set (IVNS) and single valued neutrosophic set (SVNS) in its structure. Cross entropy measure is one of the best way to calculate the divergence of any variable from the priori one variable. In this paper we first define a new cross entropy measure under NCSs environment which we call NC- cross entropy measure. We investigate the basic properties of NC-cross entropy. We also propose weighted NC-cross entropy and investigate its basic properties. We develop a novel multi attribute decision making (MADM) strategy based on weighted NC-cross entropy. To show the feasibility and applicability, we solve a MADM problem using the proposed strategy.

Semantic Web technologies are being increasingly adopted by the geospatial community during last decade through the utilization of open standards for expressing and serving geospatial data. This was also dramatically assisted by an ever increasing access and usage of geographic mapping and location-based services via smart devices in people’s daily activities. In this paper we explore the developmental framework of a pure Javascript client-side GIS platform exclusively based on invocable geospatial Web services. We also extend Javascript utilization on the server side by deploying a node server acting as a bridge between open source WPS libraries and popular geoprocessing engines. The vehicle for such an exploration is a cross platform Web browser capable of interpreting Javascript commands to achieve interaction with geospatial providers. The tool is a generic Web interface providing capabilities of acquiring spatial datasets, composing layouts and applying geospatial processes. In an ideal form the end-user will have to identify those services, which satisfy a geo-related need and put them in the appropriate row. The final output may act as a potential collector of freely available geospatial web services. Its server-side components may exploit geospatial processing suppliers composing that way a light-weight fully transparent open Web GIS platform.

Current commercially available instruments for monitoring mitochondrial respiration are incapable of single cell measurements. Therefore, we developed a three-electrode, Clark-type biosensor suitable for mitochondrial respirometry in single oocytes and embryos. The biosensor was embedded in a PMMA (polymethyl methacrylate) micro-chamber to allow investigation of single oocytes/embryos immersed in up to 100 µL of respiration buffer. The micro-chamber was completely sealed to avoid oxygen exchange between the inside of the chamber and the atmosphere, while being maintained at a temperature of 38.5 ˚C to preserve cell viability. Using amperometry, the oxygen consumption of cells inside the micro-chamber was measured as a change in output current and converted to femto-mol (fmol) oxygen consumed per second based on calibrations with known buffer oxygen concentrations. The sensor measured basal cell respiration supported by endogenous substrates, respiration associated with proton leak induced by inhibition of the adenosine triphosphate (ATP) synthase (complex V) with oligomycin, and the maximal non-coupled respiratory capacity revealed by Carbonyl cyanide-4-(trifluoromethoxy)phenylhydrazone (FCCP) titration. Some potential applications of this oxygen sensor system include evaluating effects of metabolic therapies on oocyte bioenergetics, and monitoring mitochondrial function throughout oocyte maturation and blastocyst development to predict embryo viability to compliment assisted reproductive technologies

The consequences of a fall on an elderly person can be diminished if the accident is attended by medical personnel within the first hour. Independent elderly people use to stay alone for long periods of time, being in more risk if they suffer a fall. The literature offers several approaches for detecting falls with embedded devices or smartphones using a triaxial accelerometer. Most of these approaches were not tested with the objective population, or are not feasible to be implemented in real-life conditions. In this work we propose a Kalman-filter-based fall detection methodology that includes a periodicity detector to reduce the false positive rate. Moreover, this methodology requires a sampling rate of only 25 Hz, it does not require large computations or memory, and it is robust among devices. We tested our approach with the SisFall dataset. Then, we validated it with a new round of simulated activities with young adults and an elderly person achieving 99.4 % of accuracy. Finally, we gave the devices to three elderly persons during two days for full-day validations. They continued with their normal life and the devices behaved as expected.

In this paper a robust version of the Wald test statistic for composite likelihood is considered by using the composite minimum density power divergence estimator instead of the composite maximum likelihood estimator. This new family of test statistics will be called Wald-type test statistics. The problem of testing a simple and a composite null hypothesis is considered and the robustness is studied on the basis of a simulation study. Previously, the composite minimum density power divergence estimator is introduced and its asymptotic properties are studied.

Social recommendation is almost as the integration of the business platform and social platform, and gradually become a top in recommendation system. Social recommendation algorithm solves the problem of cold start and data sparseness for traditional commodity, while the internal structure of the relationship graph in social relations has not been fully excavated. This paper proposes two models of Micro Relation Transfer Model and Macro Relation Transfer Model of social relations, and applies the social relations transfer models into the social recommendation system. A relationship graph is built from the relationship between customers on the Internet. Micro Relation Transfer Model establishes the transfer activation function by calculating the relationship between the two customers using the similarity of interests set. Micro Relation Transfer Model spreads the relationship of friends by calculating the proportion of common neighbors held by the customer's social relations. In order to effectively control the transmission range and effect of social relations graph, we introduce pruning algorithm based on Monte Carlo Decision Tree convergence algorithm. The experimental results show that SRRTC algorithm enhances the success rate and stability significantly.

Singing melody extraction is the task that identifies the melody pitch contour of singing voice from polyphonic music. Most of the traditional melody extraction algorithms are based on calculating salient pitch candidates or separating the melody source from the mixture. Recently, classification-based approach based on deep learning has drawn much attentions. In this paper, we present a classification-based singing melody extraction model using deep convolutional neural networks. The proposed model consists of a singing pitch extractor (SPE) and a singing voice activity detector (SVAD). The SPE is trained to predict a high-resolution pitch label of singing voice from a short segment of spectrogram. This allows the model to predict highly continuous curves. The melody contour is smoothed further by post-processing the output of the melody extractor. The SVAD is trained to determine if a long segment of mel-spectrogram contains a singing voice. This often produces voice false alarm errors around the boundary of singing segments. We reduced them by exploiting the output of the SPE. Finally, we evaluate the proposed melody extraction model on several public datasets. The results show that the proposed model is comparable to state-of-the-art algorithms.

With the rapid development of satellite remote sensing technology, the volume of image datasets in many application areas is growing exponentially and the demand for Land-Cover and Land-Use change remote sensing data is growing rapidly. It is thus becoming hard to efficiently and intelligently retrieve the change information that users need from massive image databases. In this paper, content-based image retrieval is successfully applied to change detection and a content-based remote sensing image change information retrieval model is introduced. First, the construction of a new model framework for change information retrieval in a remote sensing database is described. Then, as the target content cannot be expressed by one kind of feature alone, a multiple-feature integrated retrieval model is proposed. Thirdly, an experimental prototype system that was set up to demonstrate the validity and practicability of the model is described. The proposed model is a new method of acquiring change detection information from remote sensing imagery and so can reduce the need for image pre-processing, deal with problems related toseasonal changes as well as other problems encountered in the field of change detection. Meanwhile, the new model has important implications for improving remote sensing image management and autonomous information retrieval.

An adaptive spatial clustering (ASC) algorithm is proposed in this present study, which employs sweep-circle techniques and a dynamic threshold setting based on the Gestalt theory to detect spatial clusters. The proposed algorithm can automatically discover clusters in one pass, rather than through the modification of the initial model (for example, a minimal spanning tree, Delaunay triangulation or Voronoi diagram). It can quickly identify arbitrarily-shaped clusters while adapting efficiently to non-homogeneous density characteristics of spatial data, without the need of prior knowledge or parameters. The proposed algorithm is also ideal for use in data streaming technology with dynamic characteristics flowing in the form of spatial clustering in large data sets.

Functional Near Infrared Spectroscopy (fNIRS) systems for e-health applications usually suffer of poor signal detection mainly due to a low end-to-end signal to noise ratio of the electronics chain. Lock-In Amplifiers (LIA) historically represent a powerful technique helping to improve performances in such circumstances. In this work it has been designed and implemented a digital LIA system, based on a Zynq® Field Programmable Gate Array (FPGA), trying to explore if this technique might improve fNIRS system performances. More broadly, FPGA based solution flexibility has been investigated, with particular emphasis applied to digital filter parameters, needed in the digital LIA, and it has been evaluated its impact on the final signal detection and noise rejection capability. The realized architecture was a mixed solution between VHDL hardware modules and software ones, running within a softcore microprocessor. Experimental results have shown the goodness of the proposed solutions and comparative details among different implementation will be detailed. Finally a key aspect taken into account throughout the design was its modularity, allowing an ease increase of the input channels while avoiding the growth of the design cost of the electronics system.