Quantum turbulence deals with the phenomenon of turbulence in quantum fluids, such as superfluid helium and trapped Bose-Einstein condensates (BECs). Although much progress has been made in understanding quantum turbulence, several fundamental questions remain to be answered. In this work, we investigated the entropy of a trapped BEC in several regimes, including equilibrium, small excitations, the onset of turbulence, and a turbulent state. We considered the time evolution when the system is perturbed and let to evolve after the external excitation is turned off. We derived an expression for the entropy consistent with the accessible experimental data, that is, using the assumption that the momentum distribution is well-known. We related the excitation amplitude to different stages of the perturbed system, and we found distinct features of the entropy in each of them. In particular, we observed a sudden increase in the entropy following the establishment of a particle cascade. We argue that entropy and related quantities can be used to investigate and characterize quantum turbulence.

Identifying the determinants of human behavior is useful to adjust interventions and lead the civil society towards a stronger commitment with climate change mitigation and adaptation objectives, achieving greater support for successfully implementing environmental policies. Existing research has largely focused on case studies of pro-environmental behaviors (PEBs) in developed economies but there is yet very little evidence for developing countries. This study provides estimations of the effect of internal factors, such as sociodemographic variables, and four psychological dimensions (climate change knowledge, environmental attitudes, self-efficacy, trust in sources of environmental information) on PEBs. Data was obtained through a survey applied with future decision makers - university students - from Colombia (n = 4769) and Nicaragua (n = 2354). Indices were generated for PEBs and the psychological dimensions using z-scores and Principal Component Analysis. Partial correlations were evaluated through the Ordinary Least Squares method. Our results suggest that, in order to reach the planned emission reduction targets, policy approaches should more strongly focus on educating and motivating citizens and prepare them for contributing to the environmental cause, as well as provide individual solutions to combat climate change, rather than providing only information on its causes and consequences.

Within the past several decades, the emergence of new viral diseases with severe health complications and mortality is evidence of an age-dependent, compromised bodily response to abrupt stress with concomitantly reduced immunity. The new severe acute respiratory syndrome coronavirus 2, SARS-CoV-2, causes coronavirus disease 2019 (COVID-19). It has increased morbidity and mortality in persons with underlying chronic diseases and those with a compromised immune system regardless of age and in older adults who are more likely to have these conditions. While SARS-CoV-2 is highly virulent, there is variability in the severity of the disease and its complications in humans. Severe pneumonia, acute respiratory distress syndrome, lung fibrosis, cardiovascular events, acute kidney injury, stroke, hospitalization, and mortality have been reported that result from pathogen–host interactions. Hallmarks of aging, interacting with one another, have been proposed to influence health span in older adults, possibly via mechanisms regulating the immune system. Here, we review the potential roles of the hallmarks of aging coupled with host–coronavirus interactions. Of these hallmarks, we focused on those that directly or indirectly interact with viral infections, including immunosenescence, inflammation and inflammasomes, adaptive immunosenescence, genomic instability, mitochondrial dysfunction, telomere attrition, epigenetic alterations, and impaired autophagy. These hallmarks likely contribute to the increased pathophysiological responses to SARS-CoV-2 among older adults and may play roles as an additive risk of accelerated biological aging even after recovery. We also briefly discuss the role of anti-aging drug candidates that require paramount attention in COVID-19 research.

SARS-CoV-2, the novel coronavirus behind COVID-19 pandemic is acquiring new mutations in its genome. Although some mutations provide benefits to the virus against human immune response, a number of them may result in their reduced pathogenicity and virulence. By analyzing more than 3000 high-coverage, complete genome sequences deposited in the GISAID database, here I report a unique 28881-28883:GGG>AAC trinucleotide-bloc mutation in the SARS-CoV-2 genome that results in two sub-strains, described here as SARS-CoV-2g (28881-28883:GGG genotype) and SARS-CoV-2a (28881-28883:AAC genotype). Computational analysis and literature review suggest that this bloc mutation would bring 203-204:RG(arginine-glycine)>KR(lysine-arginine) amino acid changes in the nucleocapsid (N) protein affecting the SR (serine-arginine)-rich motif of the protein, a critical region for the transcription of viral RNA and replication of the virus. Thus, 28881-28883:GGG>AAC bloc-mutation is expected to modulate the pathogenicity of the SARS-CoV-2. Remarkably, SARS-CoV-2g and SARS-CoV-2a strains can be linked with the heterogeneity of COVID-19 cases across different regions within and between countries by analyzing existing data. Sequence analysis suggests that severely affected cities, such as Milan, Lombardy, New York, Paris have the predominant presence of SARS-CoV-2g strains, whereas less affected places like Abruzzo, Lyon, Valencia have a relatively higher presence of SARS-CoV-2a, an indication that the latter strain may contribute to the reduced cases of COVID-19. A similar relationship is observed when Netherlands, Portugal are compared with Spain, France and Germany. These analyses suggest that the SARS-CoV-2 has already evolved into a less infective SARS-CoV-2a affecting COVID-19 cases in different regions. The time a country or region needs to acquire SARS-CoV-2a strains may be indicative to the time it would need to overcome the peak of the COVID-19 cases. To confirm these assumptions, prompt retrospective and prospective epidemiological studies should be conducted in different countries to understand the course of pathogenicity of the SARS-CoV-2a and SARS-CoV-2g. Potential drugs can be designed targeting 28881-28883 region of the N protein to modulate virus pathogenicity.

The new coronavirus is very likely to already exist in the complex system of human society, including the population and the surrounding environments. Therefore, the research focus of the origin of COVID-19 should be shifted from how wild animals spread it to humans to how it was triggered by complex natural, social, and living systems. We advocate three levels of attribution (i.e., the source of the virus), inducement (i.e., the incentive factors triggering the outbreak), and cause (i.e., the birth of the virus) to reveal the origin of COVID-19 from the shallower to the deeper. It not only meets the urgent needs of short-term prevention and control, but also provides technical weapons for the long-term fight against emerging viruses.

Landslides are a frequent and recurrent problem in hilly regions of India and predicting them is always a challenging task. In this paper, an attempt was made to deal with this problem using advanced physical and numerical modeling methods. Detailed understanding of the initial slope failures is very interesting, and challenging at the same time, in the design and development of wireless sensor network based on early warning of landslide monitoring. A small scale physical model was developed to assess the instability through a sensor network with variable rain fall intensity. This was achieved by increasing the simulated rain water flow intensity in different time spans (dry condition, at t=0 to t= 30 min, 0.5 mm/min at t=30 to t= 60 min, 0.75 mm/min at t=60 to t=91 min and 1 mm/min at t=91 to t= 120 min). The water level and movement in the slope was recorded by rainfall sensor, vibration sensor, soil moisture sensor and a digital camera. The following changes were observed during the slope failure: a) movement of small particles at top of the slope; b) initial failure of medium size soil particle; c) scouring of soil mass; d) whole slope collapse. The obtained results clearly indicated the superiority and effectiveness of the proposed system in providing a factor of safety for the progressive slope.

Wi-Fi tethering using a mobile device (e.g., a smartphone or a tablet) as a hotspot for other devices has become a common practice. Despite the potential benefits of Wi-Fi tethering, the open source nature of mobile operating systems (e.g., Google Android) can be abused by a selfish device to manipulate channel-access parameters to gain an unfair advantage in throughput performance. This can cause serious performance problems within a well-planned Wi-Fi network due to an unauthorized selfish or misconfigured tethering device interfering with nearby well-planned access points (APs). In this paper, we demonstrate that the selfish behavior of a tethering node that adjusts the clear channel assessment (CCA) threshold has strong adverse effects in a multi-AP network, while providing the selfish node a high throughput gain. To mitigate this problem, we present a passive online detection scheme that identifies the network condition and detects selfish tethering nodes with high accuracy by exploiting the packet loss information of on-going transmissions. To the best of our knowledge, this is the first research to consider the problem of detecting a selfish tethering node in managed Wi-Fi networks.

Nanoparticles (NPs) have various applications in medicine, cosmetics, optics, catalysis, environmental purification, and other areas nowadays. With an increasing annual production of NPs, the risks of their harmful influence to the environment and human health is rising. Currently, our knowledge about the mechanisms of interaction between NPs and living organisms is limited. Additionally, poor understanding of how physical and chemical characteristic and different conditions influence the toxicity of NPs restrict our attempts to develop the standards and regulations which might allow us to maintain the safe living conditions. The marine species and their habitat environment are under continuous stress due to anthropogenic activities which result in the appearance of NPs in the aquatic environment. Our study aimed to evaluate and compare biochemical effects caused by the influence of different types of carbon nanotubes, carbon nanofibers, and silica nanotubes on four marine microalgae species. We have evaluated the changes in growth-rate, esterase activity, membrane polarization, and size changes of microalgae cells using flow cytometry method. Our results demonstrated that toxic effects caused by the carbon nanotubes strongly correlated with the content of heavy metal impurities in the NPs. More hydrophobic carbon NPs with less ordered structure had a higher impact on the red microalgae P. purpureum because of higher adherence between the particles and mucous covering of the algae; silica NPs caused significant inhibition of microalgae growth-rate predominantly produced by mechanical influence.

Electrospinning is known to be an effective and straightforward technique to fabricate polymer non woven matrices made of nano and microfibers. Micro patterned morphology of electrospun matrices results to be outmost advantageous in the biomedical field, since it is able to mimic extracellular matrix (ECM), and favors cell adhesion and proliferation. Controlling electrospun fibers alignment is crucial for the regenerative purposes of certain tissues, such as neuronal and vascular. In this study we investigated the impact of electrospinning process parameters on fiber alignment in tubular nanofibrous matrices made of Poly (L-lactide-co-ε-caprolactone) (PLA-PCL); a Design of Experiments (DoE) approach is here proposed in order to statistically set up the process parameters. The DoE was studied keeping constants the previously set material and environmental parameters; voltage, flow rate and mandrel rotating speed were the process parameters here investigated as variables. Orientation analysis was based on ImageJ and plugin Orientation J analysis of SEM images. The results show that voltage combined with flow rate has significant impact on electrospun fiber orientation, and the greatest orientation is achieved when all the three input parameters (voltage, flow rate and mandrel rotation speed) are at their maximum value.

The evolution and miniaturization of the technologies for processing, storage, and communication have enabled computer systems to process a high volume of information and make decisions without human intervention. Within this context, several systems architectures and models have gained prominences, such as the Internet of Things (IoT) and Smart Grids (SGs). SGs use communication protocols to exchange information, among which the Open Smart Grid Protocol (OSGP) stands out. In contrast, this protocol does not have integration support with IoT systems that use some already consolidated communication protocols, such as the Constrained Application Protocol (CoAP). Thus, this work develops the integration of the protocols OSGP and CoAP to allow the communication between conventional IoT systems and systems dedicated to SGs. Results demonstrate the effectiveness of this integration, with the minimum impact on the flow of commands and data, making possible the use of the developed CoAP-OSGP Interface for Internet of Things (COIIoT).

It is well known that the Continuous Galerkin Finite Element (CGFE) method is globally consistent with respect to the first law of thermodynamics. This means that, for any mesh, all obtained discrete solutions will conserve total energy. One might expect, that the method is, also, globally consistent with respect to the second law of thermodynamics. In this paper, we formally study if such conjecture is true. The heat conduction equation is used as the physical model for this analysis. In the present study it is proved that the conjecture is false: at least, for standard piecewise linear (1D and 2D) elements, the CGFE method is not always globally consistent with respect to the second law of thermodynamics. In other words, some obtained discrete solutions can violate the global postulate of the second law, which asserts that total entropy can never decrease.

A Tangible User Interface (TUI) is a new interaction option that uses nontraditional input and output elements. A tangible interface thus allows the manipulation of physical objects using digital information. The exploration and manipulation of physical objects is a factor to be considered in learning in children, especially those with some kind of disability such as hearing, who maximize the use of other senses such as vision and touch. In a tangible interface, three elements are related - physical, digital and social. The potential of IoT for children is growing. This technology IoT integrated with TUI, can help for that parents or teachers can monitoring activities of the child. Also to identify behavior patterns in the child with hearing impairment. This article shows four case studies, where had been designed different products of Internet of Things Tangible applied a several contexts and with products of low cost.

IoT is a fast growing technology that has Promising potential for shaping our future. In this fast growing world of IoT, IoT systems are released without proper testing which effect its quality and does not guarantee user satisfaction. Different testing methodologies are carried out to ensure Quality assurance of IoT before releasing it to the market. In this paper we have reviewed different testing techniques using AI and different tools to ensure Quality of IoT. In this paper we have also reviewed different IoT challenges related to its quality.

The correspondence principle made of unitarity, locality and renormalizability has been very successful in quantum field theory. Among the other things, it helped us build the standard model. However, it also showed important limitations. For example, it failed to restrict the gauge group and the matter sector in a powerful way. After discussing its effectiveness, we upgrade it to make room for quantum gravity. The unitarity assumption is better understood, since it allows for the presence of physical particles as well as fake particles (fakeons). The locality assumption is applied to an interim classical action, since the true classical action is nonlocal and emerges from the quantization and a later process of classicization. The renormalizability assumption is refined to single out the special role of the gauge couplings. We show that the upgraded principle leads to an essentially unique theory of quantum gravity. In particular, in four dimensions, a fakeon of spin 2, together with a scalar field, is able to make the theory renormalizable while preserving unitarity. We offer an overview of quantum field theories of particles and fakeons in various dimensions, with and without gravity.

Modularity is arguably one of the most influential theses guiding research on brain and cognitive function since phrenology. This paper considers the following question: is modularity entailed by recent Bayesian models of brain and cognitive function, especially the predictive processing framework? It starts by considering three of the most well-articulated arguments for the view that modularity and predictive processing work well together. It argues that all three kinds of arguments for modularity come up short, albeit for different reasons. The analysis in this paper, although formulated in the context of predictive processing, speaks to broader issues with how to understand the relationship between functional segregation and integration and the reciprocal architecture of the predictive brain. These conclusions have implications for how to study brain and cognitive function. Specifically, when cognitive neuroscience works within an acyclic Markov decision scheme, adopted by most Bayesian models of brain and cognitive function, it may very well be methodologically misguided. This speaks to an increasing tendency within the cognitive neurosciences to emphasise recurrent and reciprocal neuronal processing captured within newly emerging dynamical causal modelling frameworks. The conclusions also suggest that functional integration is an organising principle of brain and cognitive function.

In the case that ship operators may not be aware of the potential risks of environmental factors in situation of high causation probability during the initial stage of the geometric probability analysis process, it is likely that higher-grade collision accident measures will not be taken. However, if any risks is told to the ship operators, more effective and intentional measures can be taken in time. Moreover, if the causation probability corresponding to environmental factors is no less than the risk early warning critical value calculated based on historical collision accident data, there would be a high-risk level that a collision may occur. A new method is put forward based on quantitative analysis of environmental factors and previous collision statistics to provide early warning of any accident risk, and a risk early-warning critical value (REWCV) can be obtained based on this simple but highly operational and practical method. A case study of Three Gorges Reservoir in China indicates that the range of environmental factors where the probability of collision accident grows rapidly is consistent with environmental limits defined by Chinese maritime standards. In addition, the relationship between the risk early-warning critical value and the number of previous collision accident is also clarified.

Entropic Dynamics (ED) is a framework in which Quantum Mechanics is derived as an application of entropic methods of inference. In ED the dynamics of the probability distribution is driven by entropy subject to constraints that are codified into a quantity later identified as the phase of the wave function. The central challenge is to specify how those constraints are themselves updated. In this paper we review and extend the ED framework in several directions. A new version of ED is introduced in which particles follow smooth differentiable Brownian trajectories (as opposed to non-differentiable Brownian paths). To construct the ED we make use of the fact that the space of probabilities and phases has a natural symplectic structure (i.e., it is a phase space with Hamiltonian flows and Poisson brackets). Then, using an argument based on information geometry, a metric structure is introduced. It is shown that the ED that preserves the symplectic and metric structures -- which is a Hamilton-Killing flow in phase space -- is the linear Schrödinger equation. These developments allow us to discuss why wave functions are complex and the connections between the superposition principle, the single-valuedness of wave functions, and the quantization of electric charges. Finally, it is observed that Hilbert spaces are not necessary ingredients in this construction. They are a clever but merely optional trick that turns out to be convenient for practical calculations.

This study have uniquely mad use of Box-Jenkins ARIMA models to address the core of the threes objectives set out in view of the focus to add meaningful value to knowledge exploration. The outcome of the research have testify the achievements of this through successful nine months out-of-sample forecasts produced from the program codes, with indicating best model choices from the empirical estimation. In addition, the results also provide description of risks produced from the uncertainty Fan Chart, which clearly outlined possible downside and upside risks to tourist visitations in the country. In the conclusion, it was suggested that downside risks to the low level tourist arrival can be managed through collaboration between authorities concerned with the management of tourist arrivals in the country.

Two important types of metal oxide nanoparticle catalysts Copper (II) oxide (CuO) and Cerium oxide (CeO₂) are prepared by a suitable method which was traditional precipitation (PT) method at calcination temperature of 400^oC for 5h and used for the synthesis of glycerol carbonate GC (C₄H₆O₄) from the direct reaction by the carbonylation of Glycerol GL (C₃H₈O₃) with Carbone Dioxide. The precipitation (PT) was an important route for the preparation of nanoparticles catalyst. The effects of performance of (CuO and CeO₂) nanoparticle catalysts on the conversion of glycerol GL, yield of glycerol carbonate GC, selectivity of glycerol carbonate are researched. XRD, XPS, BET, FT-IR, CO₂-TPD, H₂-TPR are used for the characterization of the prepared catalysts. Comparing the optimal performance between them under reaction conditions were 150 ^oC, 4MPa (40 bar.), 5h, and both CuO and CeO₂ catalyst amount 37.6 % (based on ratio of glycerol weight) by using 2-pyridinecarbonitrate (C₆H₄N₂) as dehydrating agent and dimethylformamide (DMF), (C₃H₇NO) as solvent. The glycerol conversion (X_GL), glycerol carbonate yield (Y_GC) and glycerol carbonate selectivity (S_GC) over 0.7g CuO are 57.151%, 47.524%, and 83.156%, respectively, and glycerol carbonate yield over 0.7 CeO₂ is 36.2185% or 35.076%, and the yield of GC could reach as high as 78.234% over 1.73g CeO₂, the both catalysts could be easily regenerated by washing with methanol and water after a reaction and then dried at 60 ^oC overnight after that calcination at 400 ^oC for 5h without loss of activity after five recycling times, In addition to, the (ICP- MS) results confirmed that the leaching of CuO and CeO₂ was below the detection limit.

In a depolarizing instrument, such as a broadband imaging spectrometer, the depolarizers are placed on the system for stabilization the optical signal. They are also used to reduce measurements offsets due to strong polarization dependence, which produce drastic deterioration of the signal to noise ratio. Dynamic depolarizer with a controllable degree of polarization is also required to study the effect of noise on quantum information. The article described a new instrument for characterization the variable depolarizer with features which make it different from a polarimetric system. The analysing system based on the simple structural design and has good stability for real-time measurement. A practical application of the described interferometer system for variable depolarizer characterization is also presented.

Voronoi entropy for the random patterns and patterns demonstrating various elements of symmetry are calculated. The symmetric patterns are characterized by the values of the Voronoi entropy very close to those inherent to random ones. This contradicts the idea that the Voronoi entropy quantifies the ordering of the seed points, constituting the pattern. The extension of the Shannon-like formula embracing symmetric patterns is suggested. Analysis of Voronoi diagrams enables revealing of the elements of symmetry of the pattern.

We do fuzzification the concept of domination in crisp graph by using membership values of nodes, $\alpha$-strong arcs and arcs. In this paper, we introduce a new variation on the domination theme which we call vertex domination. We determine the vertex domination number $\gamma_v$ for several classes of fuzzy graphs, specially complete fuzzy graph and complete bipartite fuzzy graphs. The bounds is obtained for the vertex domination number of fuzzy graphs. Also the relationship between $M$-strong arcs and $\alpha$-strong is obtained. In fuzzy graphs, monotone decreasing property and monotone increasing property is introduced. We prove the vizing's conjecture is monotone decreasing fuzzy graph property for vertex domination. we prove also the Grarier-Khelladi's conjecture is monotone decreasing fuzzy graph property for it. We obtain Nordhaus-Gaddum (NG) type results for these parameters. The relationship between several classes of operations on fuzzy graphs with the vertex domination number of them is studied.

The main objective of this paper was description of seasonal and interannual trends in secondary production and mortality rates of the three most important Copepoda taxa in the Gulf of Gdańsk (southern Baltic Sea). Samples were collected monthly from 6 stations located in the western part of the Gulf of Gdańsk during three research periods: 1998-2000, 2006-2007 and 2010-2012. Production was computed basing on copepod biomass and mortality rates estimated according to vertical life table approach. Redundancy analysis was used to investigate relationship between secondary production and environmental conditions. Considering the entire research period there was significant interannual and seasonal variability of secondary production, mortality rate as well as abundance and biomass anomalies. Conducted analysis revealed correlation between increasing temperature and production of Acartia spp. and T.longicornis developmental stages, while older copepodites of P.acuspes showed almost negative correlation with temperature. The mortality rate estimations obtained for Acartia spp. Were highest in summer, while for T.longicornis peak was usually noted in spring-summer period. Lowest mortality rate estimations were noted in autumn and winter for almost all stages of investigated taxa.

This paper outlines a new methodology for developing strategy for supply chain integration of Autonomous Electrical Vehicles (AEV) to the Internet of Things (IoT). The methodology consists of external architecture and internal design that anticipates the business strategy in the development process. The methodology is designed to anticipate the impact of developments in new road transport technologies, such as Tesla Truck or Tesla Pickup. Since the methodology is designed to anticipate the impact of non-existing technologies, it represents green-field analysis. Green-field is defined as a new and non-existent operation. Green-field strategy architecture in this paper is presented as a process of accepting the world and acting upon that version of the world. The results of the analysis are presented as pathways and outcomes, emerging from the interrelated relationship between AEV and IoT. The emerging methodology is applied through two case studies to evaluate the impact to environment, performance and operationalisation. The methodology proposes architecture and design for integrating AEV and IoT in the supply chain strategy, and a set of new evaluation criteria that promote acceptance of Artificial Intelligence (AI) in the design process. The main contribution to knowledge is a new methodology for integrating AEV and the IoT to the supply chains. The paper applies interplay between inductive and deductive case study and grounded theory approach to build upon the concept of supply chain architecture and contribute to knowledge to the topic of formulating green-field integrated AEV- IoT supply chain strategy.

This research article reports the results of a qualitative case study that correlates academic literature with five Industry 4.0 cyber trends, seven cyber risk frameworks and two cyber risk models. While there is a strong interest in industry and academia to standardise existing cyber risk frameworks, models and methodologies, an attempt to combine these approaches has not been done until present. We apply the grounded theory approach to derive with integration criteria for the reviewed frameworks, models and methodologies. Then, we propose a new architecture for the integration of the reviewed frameworks, models and methodologies. We therefore advance the efforts of integrating standards and governance into Industry 4.0 and offer a better understanding of a holistic economic impact assessment model for IoT cyber risk.

On the termination of nearly twenty years since the beginning of commercialization of the Ukrainian higher education the intensity of discussion of its purposes, results and possible amendments don't decrease neither among experts, nor among the interested public. Supporters and opponents of commercialization note that education is that social branch which participates in the formation of prerequisites of economic growth. The main point of the article is to disclose the essence of the phenomena of economism and commercialization. Economism is seen as part of globalization of education, a global corporatization of education provides training for the global labour market, using human capital economic theories. As noted by George Spring, the human capital, economists argue that investments in education lead to economic growth, reducing income inequality and increasing employment. The article confirms that the state educational policy as a component of social policy is one of instruments of influence of the state on formation of social structure and is directed ​​ to the solution of problems of societal level. It does relevant sociological examination of transformational processes in education and, in particular, results of commercialization. Thus, it is possible to claim that the educational system tests the uncommon influence of globalization, forming and building a peculiar system of the relations and interaction.

Statistical mechanics investigates how emergent properties of macroscopic systems (such as temperature and pressure) relate to microscopic state fluctuations. The underlying idea is that global statistical descriptors of order and variability can monitor the relevant dynamics of the whole system at hand. Here we test the possibility of extending such an approach to psychotherapy research investigating the possibility of predicting the outcome of psychotherapy on the sole basis of coarse-grained empirical macro-parameters. Four good-outcome and four poor-outcome brief psychotherapies were recorded, and their transcripts coded in terms of standard psychological categories (abstract, positive emotional and negative emotional language pertaining to patient and therapist). Each patient-therapist interaction is considered as a discrete multivariate time series made of subsequent word-blocks of 150-word length, defined in terms of the above categories. Static analysis (Principal Component Analysis) highlighted a substantial difference between good-outcome and poor-outcome cases in terms of mutual correlations among those descriptors. In the former, the patient’s use of abstract language correlated with therapist’s emotional negative language, while in the latter it co-varied with therapist’s emotional positive language, thus showing the different judgment of the therapists regarding the same variable (abstract language) in poor and good outcome cases. On the other hand, the dynamic analysis, based on five coarse-grained descriptors related to variability, degree of order and complexity of the series, demonstrated a relevant case-specific effect, pointing to the possibility of deriving a consistent picture of any single psychotherapeutic process. Overall, the results showed that the systemic approach to psychotherapy (an old tenet of psychology) is mature to shift from a metaphorical to a fully quantitative status.

Enterprises that seek for sustainable development should align economic interests with environmental and social requirements. It is not enough to take into account just these basics components. Technology plays a significant role in company activity. The aim of this article is to highlight the relationship between the dimensions characterising sustainability and to take a deeper look at the structure of the concept of sustainability so that to understand in more detail the completeness of the dimensions of sustainability. For achieving this aim is necessary through the analysis of researchers’ opinions to apply the logical assessment, systematisation, and comparison of information, selects the most important information describing the sustainability of technology, highlights the relationships between the technological aspect of sustainability and other sustainability dimensions, evaluates the technological processes of the corporate product in terms of sustainability, clarifies and presents arguments highlighting the importance of the technological aspect in sustainable business activity, rejects inappropriate arguments, identifies links between the arguments, and, basing on the information, proves and/or formulates anew some logical considerations to justify the full competency of the technological dimension in the sustainable development framework.

We propose the traditional goal of cancer therapists to develop a single drug or drug combination that can, by itself, eliminate all cancer cells within a host has neglected potential treatments that may achieve curative outcomes by strategically combining agents that are individually effective but non-curative. We derive basic principles for such an approach from the eco-evolutionary dynamics of background extinctions in which a “first strike” reduces the size and heterogeneity of the initial population and is followed immediately by demographic and ecological “second strikes” that push the population below an extinction threshold. This proposed strategy appears identical to the empirically-derived curative therapy in childhood Acute Lymphocytic Leukemia.

Populaces are prominent indicators of livability in creating ‘street life’ for cities and public spaces. Evaluating people’s experiences is significant in creating a city liveliness and urban heritage trail. The exploration of design strategies that could allow them to integrated and connected with other spaces in the context of city and heritage as well as creating a social life among them. The measuring variables are people’s experience on the spaces; thus, create the pattern of behavior, which cause spaces liveliness, using Kuala Lumpur Heritage Trail as an example of pedestrian priority streets, city environment and heritage value. The aim of this research is to evaluate people’s experiences and analyze their behavior towards the urban street design within cities environment and Malaysia heritage values. The analyzed review comprising on the livability of the street in the context of interrelation between behavioral patter of people and the preferences of urban heritage. Hence, this paper will give an understanding of how people experiences the presence of urban streets and heritage values, thus, bringing liveliness to the streets.

Suppressors of cytokine signaling (SOCS) influence cytokine and growth factor signaling by negatively regulating the JAK-STAT pathway. This maintains homeostasis during host immune response. However, functional characterization of SOCS family members in invertebrates is limited. In this study, we discovered the Type-I subfamily of the SOCS genes in the mealworm beetle, T. molitor. The full-length ORFs of TmSOCS5, TmSOCS6, and TmSOCS7 consisted of 1,389, 897 and 1,458 nucleotides, encoding polypeptides of 462, 297 and 485 amino acids, respectively, The C-terminal region of TmSOCS was highly conserved in the SH2 and SOCS box domains. Phylogenetic analysis revealed that the three SOCS genes clustered within the same sub-family and the highest amino acid identity was with the Tribolium castaneum SOCS genes (TcSOCS). While the expression of TmSOCS5 and TmSOCS6 was low in larval, pupal, and adult stages of the insect, TmSOCS7 showed higher expression. The expression of TmSOCS5 and TmSOCS6 was higher in larval hemocytes and adult ovary. The microbes expressed the three TmSOCS genes to varying degrees. C. albicans elicited the strongest response in the host with highest 15-fold expression in TmSOCS7 3 h post-inoculation. Collectively, these data suggest that the Type I TmSOCS could play a role in eliciting host immunity.

A combination of physical-chemical analysis has been used to monitor the aging of red wines from D.O. Toro (Spain). The changes in the chemical composition of wines that occur along aging time can be permitted to discriminate wine samples collected after one, four, seven and ten months of aging. Different computational models were used to develop a good authenticity tool to certificate wines. In this research different models have developed: Artificial Neural Network models (ANNs), Support Vector Machine (SVM) and Random Forest (RF) models. The results obtained for the ANN model developed with sigmoidal function in the output neuron and the RF model permit to determine the aging time, with an average absolute percentage deviation below 1% and it can conclude that these two models have demonstrated its capacity as a valid tool to predict the wine age.

The so-called “Chinese pyramids” are huge burial mounds covering the tombs of the Emperors of the Western Han dynasty. If we include also the mounds of the members of the royal families, these monuments sum up to more than 40, scattered throughout the western and the southern outskirts of modern Xi'an. They are mostly unexcavated and poorly known although, taken together, they form a fascinating sacred landscape, which was conceived as a perennial witness of one of the most magnificent Chinese dynasties. This sacred landscape is today encroached by the frenetic urban development of the Xi’an urban area. We discuss and elaborate here some of the results of a recent, new satellite-imagery survey of these monuments, highlighting the aspects which may contribute to solutions for a sustainable and compatible development within this important ancient landscape.

Urolithiasis is a painful experience associated with hematuria, damage to kidney tissue and renal failure. It is a multi-factorial disorder while in India, its prevalence is rapidly increasing imposing a large burden for both healthcare and economy globally. In this article, we aimed to evaluate the association between genetic defects in SPP1 gene and urolithiasis from East Indian patients.75 urolithiasis patients were recruited from SSKM Hospital & Institute of Post Graduate Medical Education & Research (IPGME&R), Kolkata, India while 75 healthy controls were recruited from the same community. SNPs based areas of SPP1 gene were analyzed by direct sequencing to identify genetic defects.We identified 3 polymorphisms one synonymous and two 3’UTR variants rs1126616: p.Ala250Ala, rs1126772: 7315 a>g, rs9138: 7471 a>c in SPP1 gene in study individuals. Genotype and allele frequency analysis of these SNPs revealed that, rs9138 SNP was significantly associated with urolithiasis risk in East Indian patients. To our knowledge this is the first study reporting the role of the gene with urolithiasis in the population of West Bengal, India.

Lead Acid Batteries (LABs) are used for starting, lighting, and igniting, as well as in air conditioning systems and to supply power to electric engines in transport vehicles (TVs). However, the application of LABs for TVs has faced a number of market challenges, mounted by the upcoming high energy density and long lifespan batteries, such as lithium ion. LABs, on the other hand, are inexpensive. The key research question is, how can the lifespan of LABs used in automotive industries be increased, while still ensuring a low cost solution? Thus, integrating LABs with the supercapacitor (known as an electric double layer capacitor—EDLC) is likely to outperform the competing alternative batteries for TVs. This paper proposes a multiple stage approach to hybrid lead acid batteries and a supercapacitor system for TVs that is capable of maintaining the battery state-of-charge (SOC) at statistically high limits, ranging between 90% and 95%. This SOC target will likely ensure that the lifespan of the hybrid battery system can be elongated (extended) more than its competitors. In this study, the multiple stage approach of concatenated converters has been designed in order to satisfy all energy storage requirements for different characteristics of LABs and the supercapacitor. The designed hybrid system has been simulated using Matrix Laboratory (MATLAB/Simulink (version R2016a, MathWorks, Natick, MA, USA)). The simulated results show that high transient currents from the direct current (DC) bus of LABs, caused by the regenerative braking or deceleration of the TVs, reduce the battery lifespan and induce mechanical stress. The supercapacitor reduces the stress on the LAB by absorbing high transient currents. This, in turn, keeps the LABs’ SOC between 90% and 96% and the voltage at 12 V. As indicated by the simulated results, the hybrid battery SOC is maintained at 90–96% and the terminal voltage is approximately 12 V.

Spatial data conflation plays a fundamental role in in many aspects of modern Geographic Information Systems (GIS) research and development such as geospatial data visualization, incremental updating of databases and disaster evaluation. The primary objective of conflation is to derive valuable information based on the comparison of multiple spatial data sources of homogeneous or heterogeneous nature. This paper reviews the state of art of the concept of conflation, feature matching, the most important progresses of conflation between image and road network data, and the complexity of spatial conflation.

The mining wastes generated during the last decades in the mining region of Pachuca-Real del Monte in Mexico, still contains silver values of interest. For this reason, the present work is a preliminary study of the leaching kinetics of silver contained in these residues, using as a leaching reagent the thiosemicarbazide-oxygen system, with the aim of proposing this leaching system as a less toxic alternative than cyaniding process. Previous the leaching process, representative samples were wholly characterized, finding 56 g of Ag and 0.6 g of Au per ton. For the kinetic study in the mentioned system, were evaluated the reagent concentration, temperature, partial pressure of oxygen, pH and stirring rate. According the experimental results found, it was observed that [CH5N3S] concentration showed a significant effect on the leaching rate, obtaining a reaction order of n = 0.93, in the range of 20 - 40 mol CH5N3S ⋅ m-3, getting so a silver recovery up to 76.9%. The effect of temperature gave an activation energy of Ea = 45.55 KJ mol-1, which was indicative of a chemical reaction control. Finally, partial pressure of oxygen has a notable effect on leaching rate, but pH and stirring rate have not apparent effect.

OBJETIVE: This study analyses the views of four groups of healthcare professionals who may play a role in the management of suicidal behaviour. The goal was to identify key factors for suicide prevention in different areas of the healthcare system. METHODOLOGY: Qualitative research was conducted using focus groups made up of different healthcare professionals who participated in the identification, management and prevention of suicidal behaviour. Professionals included were primary care physicians, psychologists, psychiatrists and emergency physicians. RESULTS: ‘Suicide’ was amongst the most relevant terms that came up in discussions most of the times it appeared associated with words such as ‘risk’, ‘danger’ or ‘harm’. In the analysis by categories, the four groups of professionals agreed that interventions in at-risk behaviours are first in importance. Prevention was the second main concern with greater significance among psychiatrists. DISCUSSION: Primary care professionals claim for more time to address patients at risk for suicide and an easier access to and communication with the mental health network. Emergency care professionals have a lack of awareness of their role in the detection of risk for suicide in patients who seek attention at emergency care facilities for reasons of general somatic issues. Mental health care professionals are in high demand in case of self-harm but they would like to receive specific training in dealing with g suicidal behaviour.

This paper investigates how blocks of buildings could fit into load shedding strategies. It focuses in particular on what could be the effects on peak shaving, occupants’ thermal comfort or CO2 emissions reduction and how to quickly quantify them. To achieve this goal, we focused on a new residential district, thermally fed by heat pumps. Four modeling approaches were confronted in order to estimate buildings' responses to load shedding orders. On the one hand, a quick estimation of the peak shaving impact can rely on experimental results if the buildings' envelope and uses of the experimentation match those of the study case. On the other hand, thermal simulation models allow us to assess thermal comfort while considering the building physical response. Finally, a hybrid modeling approach can provide a good compromise between modeling rapidity and accuracy of the impacts estimation. At district scale, it may be necessary to mix modeling approaches, from experimental results to detailed thermal models. Accuracy is not guaranteed for all approaches so that the choice should be made carefully in regards to study needs. However, results are sufficient to compare the effects of load shedding strategies on peak shaving, thermal comfort, and CO2 emissions reductions.

Measuring farms sustainable innovativeness is a big challenge for both practitioners and academics. The need of sustainable innovativeness assessment in the agricultural business is reasoned in the article. Unfortunately, the features of the farms sustainable innovativeness measurement have not yet been investigated, and any objective methodology for innovativeness assessment is not presented as well. The objective of this article is to find possibility of use some methodology for measuring farm sustainable innovativeness, which would allow ranking farms by this aspect. The article demonstrates the need for multi-criteria method of innovativeness measurement and substantiates the complex proportional assessment method (Copras) as the most appropriate for solution of indicated problem. The model for use of offered method is presented and the practical application of the model is submitted. The final result refuted the opinion that farm innovation depends only on the possibilities to invest funds in a certain area. Indeed, staff creativity and the position of the management regarding certain areas of business make an essential contribution to the sustainable innovativeness level in the agricultural organizations.

Polyurethanes are materials with a strong structure-property relationship. The goal of this research was to study the effect of a polyol blend composition of polyurethanes on its properties using a mixture design and setting mathematic models for each property. Water absorption, hydrolytic degradation, contact angle, tensile stretch, hardness and modulus were studied. Additionally, Thermal stability was studied by thermogravimetric analysis. Area under the curve was used to evaluate the effect of polyol blend composition on thermal stability and kinetics of water absorption and hydrolytic degradation. Least squares were used to calculate the regression coefficients. Models for the properties were significant, and lack of fit was not (P<0.05). Fit statistics suggest both good fitting and prediction. Water absorption, hydrolytic degradation and contact angle were mediated by the hydrophilic nature of the polyols. Tensile strength, modulus and hardness could be regulated by the molecular weight and hydroxyl index of the polyols. Regression of DTG curves from thermal analysis showed improvement of thermal stability with the increase of PCL and PE. An ANOVA test of the model terms demonstrated that three component effects on bulk properties like water absorption, hydrolytic degradation, hardness, tensile strength and modulus, and the PEG*PCL interaction with the contact angle, which is a surface property. Mixture design application allowed for an understanding of the structure-property relationship through mathematic models.

In situations of uncertainty, scenarios serve as input for evidence-based decision making. However, past experience shows that not all scenarios are treated equally, and we hypothise that only those based ion a world view shared by decision makers are perceived as credible and receive full attention. While intuitively plausible, this hypothesis has not been analysed by quantitative correlation analyses, so instead of drawing on quantitative data the paper analyses the archetypical scenarios developed in the ALARM project to substantiate the plausibility by a comparative analysis of world views, value systems and policy orientations. Shock scenarios are identified as a means to explore the possibility space of future developments beyond the linear developments models and most scenario storylines suggest. The analysis shows that the typical scenarios are based on mutually exclusive assumptions. In conclusion, a comparison of storyline and empirical data can reveal misperceptions, policy failures and the need to rethink world views as a necessary step to open up to new challenges. Deeply held beliefs will make this a transition unlikely to happen without severs crises, if not dedicated efforts to reveal the role of world views for scenarios and policies are undertaken.

We describe results from a Monte-Carlo simulation of Bell-CHSH type correlations in hydrodynamic walkers. We study feasibility of a real life walker test with relevant hydrodynamic parametric ranges. We observe the generic formation of pairs of walkers strongly anti-correlated both in position and momentum. With this source of entangled walkers, we model the insertion of 2 pins in the bath as a notion of measure, akin to the polarizers of photonic Bell tests. This insertion of pins, either static or dynamic, introduces 2 weak field signals. Each field has the physical form of a standing wave Bessel hat, representing the non-local (field mediated) influences of the measure on the walkers. With this representation of the measure, we develop protocol for a Bell game with actual hydrodynamic walkers. We model both static and dynamic insertion of pins in the walker bath. Static pins give us numerical S > 2, as a permissible Bell violation for a non-local (field based) effect. Dynamic insertion of the pins, however, leads to causal space separation of the two arms. We observe the again expected S ≤ 2. We argue for the hydrodynamic implementation and observation of these effects as a walker visualization of Bell inequalities.

In this paper, an upper bound of the longitudinal elastic modulus of unidirectional fibrous composites is proposed according to strength of materials approach, on the premise that the fiber is much stiffer than the matrix. In the mathematical derivations, the concept of boundary interphase between fiber and matrix was also taken into account and the main objective of this work is the attainment of an upper bound for the interphase stiffness with respect to fiber concentration by volume. The novel element here is that the authors have not taken into consideration any specific variation law to approximate the interphase modulus. The theoretical results arising from the proposed formula were compared with those obtained from some reliable theoretical models as well as with experimental data found in the literature, and a satisfactory agreement was observed.

This paper formulates a new strategy for participatory forest management consisting of encouraging public participation as long as it increases empathy among participants. The strategy requires the homogeneous representation of the opinion of a participant (i.e. to determine how they assess a forest plan and identify the best one). Utility assessments are prepared for participants through pair-comparisons between meaningful points in the territory and from value functions based on forest indicators. The best plan is designed by applying combinatorial optimization algorithms to the utility of a participant. The calculating of empathy -of one participant relative to another - is based on the equivalence of their respective utilities when the current forest plan is modified. This involves calculating the opinions that are due to systematic changes in the collective plan for those participants that each participant supposes will affect the utility of the other participants. Calculating empathy also requires knowing the interactions among participants, which have been incorporated through agent-based simulation models. Application of the above methodology has confirmed the association between increases in empathy and convergence of opinions in different scenarios: well and medium-informed participants and with and without interaction among them, which verifies the proposed strategy. In addition, this strategy is easily integrated into available information systems and its outcomes show advantages over current participatory applications.

Choice of the salts of therapeutic agents or active pharmaceutical ingredients (API) is based on the physicochemical properties of API and the dosage form considerations. The appropriate salt can have positive effect on overall therapeutic and pharmaceutical effects of API. However, the incorrect salt form can negatively affect the overall pharmaceutical outcomes of the API. This review addresses various criteria for choosing appropriate salt form along with the effect of salt forms on API’s pharmaceutical properties. In addition to comprehensive review of the criteria, this review also gives a brief historic perspective of the salt selection process.

Since the systematic evolution of ligands by exponential enrichment (SELEX) method was developed, aptamers have made significant contributions as bio-recognition sensors. Microdevice systems allow for low reagent consumption, high-throughput of samples, and disposability. Due to these advantages, there has been an increasing demand to develop microfluidic-based aptasensors for analytical technique applications. This review introduces the principal concepts of aptasensors and then presents some advanced applications of microdevice-based aptasensors on several platforms. Highly sensitive detection techniques such as electrochemical and optical detection have been integrated into lab-on-a-chip devices and researchers have moved towards the goal of establishing point-of-care diagnoses for target analyses.

The propeller jet from a ship has a significant component directed upwards towards the free surface of the water, which can be used for ice management. This paper describes a comprehensive laboratory experiment where the influences of operational factors affecting a propeller wake velocity field were investigated. The experiment was done on a steady wake field to investigate the characteristics of the axial velocity of the fluid in the wake and the corresponding variability downstream of the propeller. The axial velocities and the variability recorded were time-averaged. Propeller rotational speed was found to be the most significant factor, followed by propeller inclination. The experimental results also provide some idea about the change of the patterns of the mean axial velocity distribution against the factors considered for the test throughout the effective wake field, as well as the relationships to predict the axial velocity for known factors.

This paper serves a survey and empirical evaluation of the state-of-the-art in activity recognition methods using accelerometers. We examine research that has focused on the selection of activities, the features that are extracted from the accelerometer data, the segmentation of the time-series data, the locations of accelerometers, the selection and configuration trade-offs, the test/retest reliability, and the generalisation performance. Furthermore, we study these questions from an experimental platform and show, somewhat surprisingly, that many disparate experimental configurations yield comparable predictive performance on testing data. Our understanding of these results is that the experimental setup directly and indirectly defines a pathway for context to be delivered to the classifier, and that, in some settings, certain configurations are more optimal than alternatives. We conclude by identifying how the main results of this work can be used in practice, specifically in experimental configurations in challenging experimental conditions.

Alcohol abuse can result in detrimental multisystem effects. Chronic alcohol abuse is known to be associated with pathophysiological changes in multiple organs often resulting in life threatening clinical outcomes e.g. breast and colon cancer, pancreatic disease, cirrhosis of the liver, diabetes, osteoporosis, arthritis, kidney disease, immune system dysfunction, hypertension, coronary artery disease, alcohol-induced cardiomyopathy and heart failure as well as central nervous system disorders. In this review article, we will discuss the multisystemic effects of alcohol abuse and explore in greater detail alcohol’s impact on two main systems that result in pathophysiological changes i.e. the cardiovascular and central nervous systems.

Winding design methods have been a subject of research for many years of the past century. Many methods have been developed, each one characterized by some advantages and some drawbacks. Nowadays, the star of slots is the most widespread design tool for electrical machine windings. In this context, this paper presents a simple and effective procedure to determine the distribution of the EMF stars and of the winding configuration in all possible typologies of electrical machines equipped with symmetrical windings. Moreover, this procedure can also be easily implemented in a computer program in order to perform automated winding designs for rotating electrical machines. Several examples are provided in order to validate the proposed procedure.

An analysis of workplace accidents in the mining sector has been done using the database from the Spanish administration between the period 2005-2015 and applying data mining techniques. Data has been processed by means of the software Weka. Two scenarios were chosen regarding the accidents database, surface and underground mining. The most important variables involved in occupation accidents and their association rules have been determined. These rules are formed by several predictor variables that cause an accident, defining its characteristics and context. This study exposes the 20 most important association rules of the sector, either surface or underground mining, based on statistical confidence levels of each rule obtained by Weka. The outcomes display the most typical immediate causes with the percentage of accident basis of each association rule. The most typical immediate cause is body movement with physical effort or overexertion and type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident change in both scenarios. Data mining techniques have been proved as a very powerful tool to find out the root of the accidents, apply corrective measures and verify their effectiveness, either for public or private companies.

In this paper, we study the well-posedness and asymptotic behaviour of solutions to a laminated beam in thermoelasticity of type III. We first give the well-posedness of the system by using the semigroup method. Then, we show that the system is exponentially stable under the assumption of equal wave speeds. Furthermore, it is proved that the system is lack of exponential stability for case of nonequal wave speeds. In this regard, a polynomial stability result is proved.

The research presented here aims to determine how art education influences pupils' preferences for 20th-century art movements. The research was conducted on a sample of 200 pupils (N = 200) of an early school age in grade schools in Split, Croatia. We conducted an educational experiment throughout an entire school year, which included three types of intervention: observing works of art from the 20th century, introducing works of art using a puppet, and the pupils' art activities/artwork based on the 20th-century art movements. The results show that the model of art education is an important factor in changing pupils' preferences for 20th-century art movements. The students reacted positively to each kind of education, in the sense of a wider acceptance of 20th-century art (abstract, fauvism, cubism, pop art, and surrealism). The type of education did not much influence preferences when it came to classical art and visual works without artistic value. We concluded that puppets and independent creative work should be used more often in art education.

A plasmonic refractive index (RI) sensor based on metal-insulator-metal (MIM) waveguide coupled with concentric double rings resonator (CDRR) is proposed and investigated numerically. Utilizing the novel supermodes of the CDRR, the FWHM of the resonant wavelength can be modulated, and a sensitivity of 1060 nm/RIU with high figure of merit (FOM) 203.8 is realized in the near-infrared region. The unordinary modes as well as the influence of structure parameters on the sensing performance are also discussed. Such plasmonic sensor with simple framework and high optical resolution could be applied to on-chip sensing systems and integrated optical circuits. Besides, the special cases of bio- sensing and triple rings are also discussed.

Apart from their established role in embryonic development Nerve Growth Factors (NGFs) have diverse functions in the nervous system. Their role in integration of physiological functioning of the nervous system is now attracting attention. In the present analysis, we propose a novel paradigm about a novel role of NGFs: NGFs play imperative role in maintaining psychological integrity of an individual as a biological system. This function may be mediated through HPA-axis- operated homeostatic mechanisms; stress induced disruption of which may lead to psychiatric disorders. Current literature suggests existence of constitutive homeostatic regulatory mechanisms for NGFs disruption which may lead to pertinent and imperative behavioural effects. NGFs are known to play crucial role in endocrine regulation. This is especially true with the prototype ‘NGF’ and Brain Derived Neurotrophic Factor (BDNF). These moieties have been observed to play important function in maintaining neuro-endocrine homeostasis thereby having a profound impact on the psychological health of an individual. Role of NGFs and HPA-axis activation (in separate studies) in developing psychiatric disorders - especially those born of stress - have been reported. Literature suggests their unique interplay for producing a common effect which might be implicated in stress induced genesis of psychiatric disorders. This aspect, therefore, needs to be elucidated further as a disease etiogenesis model. This model may yield important insights into the biology of psychiatric disorders and may open ways for new therapeutic approaches.

There is limited evidence for the association between malnutrition and hospital mortality as well as Intensive Care Unit length-of-stay (ICU-LOS) in critically ill patients. We aimed to examine the aforementioned associations by conducting a prospective cohort study in an ICU of a Singapore tertiary hospital. Between August 2015 and October 2016, all adult patients with ≥24 h of ICU-LOS were included. The 7-point Subjective Global Assessment (7-point SGA) was used to determine patients’ nutritional status within 48 hours of ICU admission. Multivariate analyses were conducted in two ways: 1) presence versus absence of malnutrition, and 2) dose-dependent association for each 1-point decrease in the 7-point SGA. There were 439 patients of which 28.0% were malnourished, and 29.6% died before hospital discharge. Malnutrition was associated with an increased risk of hospital mortality [adjusted-RR 1.39 (95%CI: 1.10–1.76)], and this risk increased with a greater degree of malnutrition [adjusted-RR 1.09 (95%CI: 1.01–1.18) for each 1-point decrease in the 7-point SGA]. No significant association was found between malnutrition and ICU-LOS. Conclusion: There was a clear association between malnutrition and higher hospital mortality in critically ill patients. The association between malnutrition and ICU-LOS could not be replicated and hence requires further evaluation.

In recent years, the internet of things has been widely utilized in various fields, such as in smart factories or connected cars. As its domain of application has expanded, it has begun to be employed using multi-server architectures for a more efficient use of resources. However, because users wishing to receive IoT services connect to multi-servers over wireless networks, this can expose systems to various attacks and result in serious security risks. To protect systems (and users) from potential security vulnerabilities, a secure authentication technology is necessary. In this paper, we propose a smart card-based authentication protocol, which performs the authentication for each entity by allowing users to go through the authentication process using a smart card transmitted from an authentication server, and to login to a server connected to the IoT. Furthermore, the security of our proposed authentication protocol is verified by simulating a formal verification scenario using AVISPA, a security protocol-verification tool.

For a wide field of view (FoV) wavefront coding athermalized infrared imaging system with a single decoding kernel, the off-axis aberration tends to cause artefacts. In order to correct off-axis aberration, many pieces of lenses will reduce the transmission efficiency and increase the weight and cost. To meet requirements for wide FoV, wide operating temperature and low weight of infrared imaging systems, this paper reports a wide-FoV wavefront coding athermalized infrared imaging system with a two-piece lens. Its principle, design, manufacture, measurement and performance validation are successively discussed. This paper constructs an optimization problem which maximizes the weighted mean of PSF consistency for both the FoV and operating temperature range. The two-piece lens contains four surfaces, where three aspheric surfaces are introduced to reduce optical off-axis aberrations and a cubic surface is introduced to achieve athermalization. The optical phase mask containing an aspheric surface and a cubic surface is manufactured by nano-metric machining of ion implanted material(NiIM). Experimental results validate that our wide-FoV wavefront coding athermalized infrared imaging system has a full FoV of 26.10° and an operating temperature over -20°C to +70°C.

Purpose: National Institute for Health and Care Excellence (NICE) has recently published quality standards for assessment of fall risk and preventing further falls. According to the standards, multifactorial fall risk assessments should include: identification of falls history; analysis of gait, balance, mobility and muscle strength, among other factors. Despite being based on subjective analysis or simple timing and not being multifactorial, physiotherapists and physicians quite often use these tests as reference scales to differentiate between lower and higher risk of falling. Instrumented TUG has been recently reported to provide important additional information to the overall score. Objective: To explore a case-based approach of fall risk assessment to identify the most relevant and informative risk factors that in combination could better define a person risk profile. Materials and Methods: A multifactorial assessment of fall risk through questionnaires, standard functional tests, tests instrumented with inertial sensors, and force platforms has been studied within a group aged 55-80 years old. Different fall risk factors and fall risk assessment methods were analyzed in a case-based descriptive study. Results & Discussion: Subjects at higher risk of falling were identified based on their detailed profiles. A set of features were obtained from the instrumented standard tests differing significantly between subjects presenting higher or lower fall risk. Therefore, instrumenting conventional tests with wearables containing inertial sensors and force platforms gives more detailed and quantitative insights. This information can be used to better define and tailor fall prevention exercises and to improve the follow-up of the evolution of the subject.

The teaching of mathematics at the Faculty of Military Technology of the University of Defense in the first two years of the five-year Military master’s degree is divided into the teaching of students in four specializations: Military Technologies – Mechanical, Military Technologies – Electrical, Military Geography and Cartography, and Cybersecurity. The article discusses the previous five-year experience in teaching the subjects Mathematics I, Mathematics II, Mathematics III, and Graph theory for the specialization in Cybersecurity, that the author of the paper gained while teaching, as a guarantor of these four subjects. The article provides an overview of the topics that are covered, typical exam assignments, and an evaluation of the results of the semester exams in the five years since the accreditation of the Cybersecurity specialization was granted.

This paper is devoted to an accurate determination of the London dispersive and polar free energy of adsorption, the two Lewis acid γs+ and base γs- components of polar surface energy γsAB of 2D single-crystalline and polycrystalline covalent organic frameworks such as TAPPy-TPA-COFs. Inverse gas chromatography (IGC) at infinite dilution was used to quantify the different surface parameters of the different materials. From IGC measurements, one determined the net retention time of the adsorption of n-alkanes and several polar solvents on single-crystalline and polycrystalline covalent organic frameworks. The free surface Gibbs energy of adsorption was obtained for the various organic molecules at different temperatures from their net retention volume values. The separation between the London dispersive energy and the polar energy of adsorbed molecules was carried out by using a new thermodynamic parameter PSX chosen as new indicator variable and taken into account the deformation polarizability and the harmonic mean of the ionization energies of solvents and solid materials, derived from London dispersion equation. The obtained results are very promising for the accurate determination of the surface thermodynamic parameters of adsorption of organic solvents on solid surfaces.

In this paper, the author utilizes Saddle Theorem and variational methods to deduce existence of at least six stationary solutions for reaction-diffusion Gilpin-Ayala competition model (RDGACM). To obtain the global stabilization of the positive stationary solution of the RDGACM, the author designs a suitable impulsive event triggered mechanism (IETM) to derive the global exponential stability of the the positive stationary solution. It is worth mentioning that the new mechanism can exclude Zeno behavior and effectively reduce the cost of impulse control through event triggering mechanism. Besides, compared with existing literature, the restrictions on the parameters of the RDGACM are relaxed so that the methods used in existing literature can not be applied to the relaxed case of this paper, and so the author makes comprehensive use of Saddle Theorem, orthogonal decomposition of Sobolev space $H_0^1(\Omega)$ and variational methods to overcome the mathematical difficulty. Numerical examples show the effectiveness of the methods proposed in this paper.

Many academics are critical of the current publishing system, but it is difficult to create a better alternative. This review relates to the Sciences and Social Sciences, and discusses the primary purpose of academic journals as providing a seal of approval for perceived quality, impact, significance, and importance. The key issues considered include the role of anonymous refereeing, continuous rather than discrete frequency of publications, avoidance of time wasting, and seeking adventure. Here we give recommendations about the organization of journal articles, the roles of associate editors and referees, measuring the time frame for refereeing submitted articles in days and weeks rather than months and years, encouraging open access internet publishing, emphasizing the continuity of publishing online, academic publishing as a continuous dynamic process, and how to improve research after publication. Citations and functions thereof, such as the journal impact factor and h-index, are the benchmark for evaluating the importance and impact of academic journals and published articles. Even in the very top journals, a high proportion of published articles are never cited, not even by the authors themselves. Top journal publications do not guarantee that published articles will make significant contributions, or that they will ever be highly cited. The COVID-19 world should encourage academics worldwide not only to rethink academic teaching, but also to re-evaluate key issues associated with academic journal publishing in the future.

1) Background: Capturing patients’ medical histories significantly influences clinical decisions. Errors in this process lead to clinical errors, increase costs and dissatisfaction among physicians and patients. Physicians in developing countries are overloaded with patients and cannot always follow the proper history-taking procedure. The challenges are acknowledged; however, a comprehensive understanding of the status and the remedies remained unexplored. 2) Objective: This paper aims to investigate the workload, history-taking challenges, and the willingness of the physicians to accept digital solutions. 3) Methods: A cross-sectional online survey was conducted on 104 physicians across Bangladesh, featuring 22 questions regarding their professional environment, workload, digitization status of health records, challenges in history-taking, and attitudes toward adopting digital solutions for managing patient histories; 4) Results: 92.67% of the physicians face workloads, 88.46% struggle in medical history-taking, and only 4.81% use digital medical records. About 70% struggle to complete the necessary history-taking steps, emphasizing the urgent need for solutions. An AI-based Smart Health Gantt Chart (SHGC) system has been introduced for their instant feedback. 93.27% of physicians expressed their willingness to use such a system. 5) Conclusions: The proposed SHGC has the potential to enhance healthcare efficiency in developing nations, benefit physicians, and improve patient-centered care.

We assume that poetic devices have an implicit goal: producing an overall sound scheme that will induce the reader to associate intended and expressed meaning to the sound of the poem. Sounds may be organized into categories and assigned presumed meaning as suggested by traditional literary studies. In my work, I have extracted automatically the sound grids of all the sonnets by William Shakespeare and have combined them with the themes expressed by their contents. In a first experiment I have computed lexically and semantically based sentiment analysis obtaining an 80% of agreement. In a second experiment sentiment analysis has been substituted by Appraisal Theory thus obtaining a more fine-grained interpretation which in some cases contradicts the first one. The computation for the second poet - regarded by many critics the best of last century - includes both vowels and consonants. In addition, it combines automatic semantically and lexically based sentiment analysis with sound grids. The results produce visual maps that clearly separate poems into three clusters: negative harmony, positive harmony and disharmony where the latter instantiates the need by the poet to encompass the opposites in a desperate attempt to reconcile them.

The integration of magnetic observatories of many countries into the Intermagnet network has provided researchers with new opportunities to investigate many geophysical processes. The joint processing of measurement evidence from magnetic observatories located in various geolocations makes it possible to better understand the dynamics of the interaction of solar plasma fluxes with the Earth's magnetosphere. For the correct interpretation of the dynamics of physical processes, the accuracy of the time reference of measurement results is of great importance. The measurement results of local observatories were transformed to a unified ecliptic coordinate system oriented towards the Sun in order to extract small variations in the magnetic field occurring before the magnetic storm commencement. Before transforming the coordinates, a constant component equal to the average daily value of the magnetic field components was removed from the results of minute-by-minute measurements. Owing to the averaging evidence from 84 magnetic observatories of the Intermagnet network, variations in the magnetic field of cosmic origin, preceding the magnetic storm commencement were detected. The correlation analysis of these variations recorded by different observatories revealed the presence of time shifts between the data series of different observatories. Only 62% of the observatories had a relative data shift within the range of ± 1 minute. Before the joint data processing in order to efficient use of data recorded with a time shift a method for correcting time shifts has proposed.

Coronavirus disease 2019 (COVID-19), can manifest with ocular symptoms. These symptoms can be divided into isolated events attributed to COVID-19 and those occurring in multisystem inflammatory syndrome in children (MIS-C), a newly diagnosed disease entity associated with COVID-19 infection. Currently, the literature lacks specific guidelines and treatment regimens for COVID-19 ocular symptoms, especially in children.

It has been more than a century since Erlang published his paper in 1909. The classical queueing system for the M/D/c queue has been investigated by many authors. The key is to find the roots of an equation using explicit or numerical methods. We present an alternate form of explicit solution(s) of this/these root(s) using the Lambert-W function in this paper. In addition, the unsaturated probabilities of the number of customers in the system is derived explicitly in terms of this/these root(s). Finally, the mean number of customers in the system and the mean queueing delay are obtained from these probabilities. The exact queueing delay formula for the M/D/c queue is expressed in closed-form in terms of the root(s). Numerical results show that they are in excellent agreement with the numerical results published by Seelen, Tijms and Van Hoorn.

In 1937,German mathematician L.Collatz proposed a conjeture:for any positive integer,if it is even,divide it by 2;if it is odd,multiply it by 3 and 1 to get an even number;keep going on and on, the final result is 1.This paper gives a sequence classification of odd numbers,and gives 1-1 mapping of odd numbers and odd number sequences,and uses these results to give a proof of this conjecture.

The zero offset voltage in anti-aliasing low-pass filters (LPF) included at the ADC input has a significant effect on the effective bit rate of the ADC. The article discusses methods for minimizing the systematic component of the zero offset voltage (V_OS) of operational amplifiers (Op-Amp) in the structure of the LPF, due to the degradation of the current gain of the base (b) of bipolar transistors for an extremely common subclass of Op-Amp with one high-impedance node. The methods of matching a high-impedance Op-Amp node and a buffer amplifier with the help of special correcting SCM^p and SCMⁿ multipolars are proposed. Methods of description and formation of the given coefficients of weak current asymmetry of typical Op-Amp functional units (current mirrors, input DS, buffer amplifiers, SRC, etc.) are presented. As an example, the results of computer simulation of GaAs Op-Amp with small V_OS performed on JFET field and p-n-p bipolar transistors are given.

By modifying the basic definition of cosmic red shift, considering ‘speed of light’ as an absolute cosmic expansion rate and adopting ‘Planck mass’ as the basic seed of the observed large scale universe, it is certainly possible to review and revise the basic picture of ‘standard cosmology’ and in near future, a perfect model of ‘white hole cosmology’ can be developed. In this context we have developed five assumptions. First three assumptions are based on ‘time reversed’ black holes and seem to be well connected with General theory of relativity as well as Quantum mechanics. 4^th and 5^th assumptions are helpful in understanding current galactic dark matter and flat rotation speeds. It may be noted that, considering our first three assumptions and considering the Planck Legacy 2018 data’s enhanced lensing amplitude in cosmic microwave background power spectra - conceptually, a closed universe having a positive curvature seems to be a best fit for the observed universe. With reference to our recent publication [26], for clarity on the subject, in this short communication, we make an attempt to review and explain our proposed assumptions at fundamental level. Our aim is to see that, professional and non-professional cosmologists must understand the basics of workable quantum cosmology.

Background: Acceleration of mass vaccination strategies is the only pathway to overcome the COVID-19 pandemic. Healthcare professionals and students have a key role in shaping public opinion about vaccines. This study aimed to evaluate the attitudes of dental students globally towards COVID-19 vaccines and explore the potential drivers for students' acceptance levels; Methods: A global cross-sectional study was carried out in February 2021 using an online ques-tionnaire. The study was liaised by the scientific committee of the International Association of Dental Students (IADS), and data was collected through the national and local coordinators of IADS member organizations. The dependent variable was the willingness to take the COVID-19 vaccine, and the independent variables included demographic characteristics, COVID-19-related experi-ence, and the drivers of COVID-19 vaccine-related attitude suggested by the WHO-SAGE; Results: A total of 6639 students from 22 countries representing all world regions responded to the ques-tionnaire properly. Their mean age was 22.06 ± 2.79 (17-40) years, and the majority were females (70.5%), in clinical years (66.8%), and from upper-middle-income economies (45.7%). In general, 22.5% of dental students worldwide were hesitant, and 13.9% rejected COVID-19 vaccines. The students in low- and lower-middle-income (LLMI) economies had significantly higher levels of vaccine hesitancy compared to their peers in upper-middle- and high-income (UMHI) economies (30.4% vs 19.8%; p < 0.001); Conclusions: The global acceptance level of dental students for COVID-19 vaccines was suboptimal, and their worrisome level of vaccine hesitancy was influenced by the socioeconomic context where the dental students live and study. The media and social media, public figures, insufficient knowledge about vaccines, and mistrust of governments and the pharmaceutical industry were barriers to vaccination. The findings of this study call for further implementation of epidemiology (infectious diseases) education within undergraduate dental curricula.

Several problems of radiative transfer are yet unsolved because of the difficulties of the calculations involved in them, especially if the intervening shapes are geometrically complex. The main goal of our investigation in this domain is to convert the formulas that were previously derived, into a graphical interface based on the projected solid-angle principle. Such procedure is now feasible by virtue of several widely diffused programs for Algorithms Aided Design (AAD). Accuracy and reliability of the process is controlled by means of the analytical software DianaX developed at an earlier stage by the authors. With this new approach the often cumbersome procedure of lighting and thermal exchange calculations can be simplified and made available for the neophyte, with the undeniable advantage of reduced computer time.

Access to medicines is one of the essential problems in Public Health of low- and middle-income countries (LMICs). The World Health Organization (WHO) defines access to medicines as the possibility of "having continuously accessible and affordable medicines in public or private health facilities that are within a kilometer of the place of residence." Access to medicines, as defined by the WHO, is not fully guaranteed in many LMICs and even in many regions of high-resource countries. The WHO identifies several factors as determinants of limitations in the access to medicines: rational selection, affordable prices, sustainable financing, and reliable health services. The action on these factors makes it possible to improve universal access to medicines with consequent improvement in Public Health. Adequate access to antibiotics and vaccination will avoid a large part of the deaths caused by infectious diseases in the LMICs. However, the emergence of resistance and the difficulties in vaccination campaigns due to socio-political or cultural problems make it challenging to fight many easily treatable infectious diseases. The use and abuse of antibiotics are inevitably associated with the appearance of resistances that make them ineffective. Thus, whereas limited access to antibiotics raises mortality rates from infectious diseases, generalized open access to them ends up eliminating their clinical value. Moreover, the contraction of research in this field for many years has reduced the success in discovering new drugs. Additionally, local market regulations, inadequate selection, inaccessible prices, especially for those of second and third-generation, inefficient health systems, and difficulties of administration and control of prescription compliance, especially in the case of combined therapies, are additional obstacles to universal access to antibiotics. In order to simultaneously improve access to antibiotics and keep resistances under control, it is necessary to develop training and education activities at different social levels (from patients to various Health Care Providers) to complement the national or supranational strategic plans.

Objective: To recommend how physicians can best respond to families whose hopes for a miracle via divine intervention influence their medical decisions, like, for example, making them not want to withdraw ventilatory support in cases of poor neurologic prognosis because they are still hoping for God to intervene. Methods: Auto-ethnographic analysis of chaplaincy experience in this clinical context yields a nuanced 90-second, point-of-care spiritual intervention physicians can use to address the religious aspect of families who base medical decisions on their hopes for a miracle via divine intervention. Explanation of how spiritual intervention dovetails with existing physician communication protocol for responding to families hoping for a miracle. Results: Spiritual intervention for religious aspect of miracle-hoping families is integrated into existing physician communication protocol for responding to families hoping for a miracle with recommendations for utilization of existing communication technology when necessary. Conclusion: Properly addressing the religious dimension of families hoping for a miracle may be helpful for physicians interested in decreasing their own stress levels, improving outcomes for this clinical context, and ensuring that unintentional discrimination does not perpetuate racial disparities in end-of-life care.

Recently, the concept of participatory democracy developed in the early 1970s has come back into fashion to revitalize the public involvement in political decision-making processes. Public par-ticipation in forest policy has been fully conceptualized by the scientific community in the late 1990s and early 2000s, but in many contexts the practical application remains unfulfilled. The aim of this study is to identify and analyze the participatory techniques used in literature to increase knowledge and facilitate its transferability into forest policies and strategies. A literature review was carried out to offer an overview of the participatory techniques adopted in the deci-sion-making process. At the end of literature review, 25 participatory techniques were identified based on over 2,000 publications. Afterwards, the participatory techniques were assessed using seven indicators (degree of participation, type and number of participants, time scale, cost, po-tential influence on policy). The results showed that the type of actors involved in the participa-tory technique is a key variable for the complexity and usefulness of the process, while the number of participants influences how information is disseminated. The Principal Component Analysis highlighted that the participatory techniques can be divided in three groups: the first group includes those techniques with a high degree of participation and a contextual high po-tential influence on policies, the second one includes techniques with a costs in terms of re-sources, while the third one consists of those with a large number of participants and reduced time requirements.

{We present a statistical simulation replicating the correlation observed in EPR coincidence experiments without needing non-local connectivity. We define spin coherence as a spin attribute that complements polarization by being anti-symmetric and generating helicity. Point particle spin becomes structured with two orthogonal magnetic moments, each with a spin of $\frac{1}{2}$—these moments couple in free flight to create a spin-1 boson. Depending on its orientation in the field, when it encounters a filter, it either decouples into two independent fermion spins of $\frac{1}{2}$, or it remains a boson and precesses without decoupling. The only variable in this study is the angle that orients a spin on the Bloch sphere, first identified in the 1920s. There are no hidden variables. The new features introduced in this work result from changing the spin symmetry from SU(2) to the quaternion group, $Q_8$, which complexifies the Dirac field. The transition from a free-flight boson to a measured fermion is the reason for the observed violation of Bell's Inequalities and resolves the EPR paradox.

Time can be a difficult concept to understand. Albert Einstein, who viewed time as an illusion, explained the passage of time is relative to the observer’s frame of reference in the space-time continuum. However, the state of consciousness of the observer also influences the passage of time. This paper examines the relationship between the experience of time and different states of consciousness including near-death experiences, mystical states of consciousness, and psychedelic medicine-induced states of consciousness. Two different experiences of time are described. These are Chronos and Kairos. Chronos is described as 4th dimensional time whereas Kairos is 5th dimension time. Methods for facilitating the experience of Kairos are discussed and the potential benefits of experiencing Kairos are reviewed.

One of the most important agrotechnical factors that influence the growth conditions of crops is plant density. Alterations in habitat conditions result in the emergence of phytophagous organisms, whose development is closely associated with host plants. The objective of this study was to assess the abundance and species composition of thrips (Thysanoptera) collected in soybean plants of different varieties cultivated under different plant arrangements (row spacing, number of seeds sown differed). The research was conducted at two locations in southwestern Poland between 2015 and 2018. The herbivores that inhabit plants were caught using an entomological net. The experiments were carried out using the complete randomised block design, with four replications. Regardless of location and treatment, thrips were the most numerous group of pests. Thrips tabaci and T. fuscipes were the dominant species within the collected material. A total of 24 species of thrips were identified and their dietary specialisation was determined. The assemblages of studied insects were also analysed due to the density of the plants and the stage of development. The increase in the sowing density of soybean (90 seeds per m2) resulted in a greater total number of thrips compared to a lower sowing density (50 seeds per m2). The number of thrips significantly increased during the flowering period and shortly after the flowering time, which made them a significant threat to the plants. Therefore, it is crucial to develop innovative pest management strategies tailored to effectively grow soybean to mitigate potential pest-related challenges.

:Peat substrate is made from peat from drained peatlands, which is a limited resource. A realistic estimate is that 50% of the world’s wetlands have been lost. Peat is used in horticulture, especially for the cultivation of vegetables in greenhouses. The consequences of peatland exploitation are an in-crease in the greenhouse effect and a decrease in carbon stocks. Wood fiber can be used as an al-ternative to peat. The chemical properties of the growing media interact and change continuously due to the small volume of the growing media, which is limited by the growing container. This study aims to gain new knowledge on the impact of nutrient changes in the microbial degradation of carbon compounds in wood fiber and mixtures with peat substrate on the content and uptake of nutrients required by plants. Cucumbers (Cucumis sativus L.) variety “Dirigent H” developed in the Netherlands, were cultivated in growing media of peat substrate and wood fiber: (1) peat substrate (PS); (2) wood fiber (WF); (3) wood fiber and peat substrate 50/50 v/v (WF/PS 50/50); (4) wood fiber and peat substrate 25/75 v/v (WF/PS 25/75). The rates of fertilization were the following: (1) con-ventional fertilization (CF); (2) N13; (3) N23; (4) N30. The experiment was carried out in three repli-cations. As the amount of wood fiber increased, the humidity and pH of the growing medium in-creased. Fertilization of cucumbers with different rates of nitrogen influenced the nutrient uptake. Plants grown in 50/50 and 25/75 growing media had the best Cu uptake when fertilized with N23. When the plants grown in the wood fiber media and the 50/50 media were fertilized with N13, N23, and N30, the Mn content in the growing media at the end of the growing season was significantly lower than the Mn content in the media with conventional fertilization. Thus, nitrogen improved the uptake of Mn by plants grown not only in the wood fiber but also in combinations with peat sub-strate. Growing plants in wood fiber and fertilizing them with N13 can result in optimum uptake of micronutrients. The number and mass of cucumber fruits per plant were influenced by the amount of wood fiber in the growing media and the application of nitrogen fertilizer. The highest number of fruits and mass of fruits per plant was obtained significantly higher when cucumbers were grown on WF/PS 50/50 growing media with additional N13 fertilization.

(1) Selecting high-quality varieties with disease resistance by crossbreeding artificially is the most fundamental way to address the damage caused by Calonectria spp in eucalypt plantations. However, understanding the mechanism of the formation of disease-resistant heterosis in eucalypt is crucial for the success of crossbreeding. (2) Two eucalypt hybrids, susceptible EC333 (H1522 × unknown) and resistant EC338 (W1667 × P9060) were screened in our previous study on the infection of the isolates of Calonectria., which causes eucalypt leaf blight. RNA-Seq sequencing was performed on susceptible hybrid EC333, disease-resistant hybrid EC338 (W1667 × P9060), and their parents. A comparison was conducted between the the transcriptomic data sequenced and the reference genome of Eucalyptus grandis, and the The differential expression of genes and functional annotations between hybrids and parents was identified. (3) Gene differential expression analysis shows that there are 3912 differentially expressed genes between EC333 and EC338, with 1631 up-regulated and 2281 down-regulated. The expression trends of differential gene sets in P9060 and EC338 were similar. However, the expression trend of W1767 was opposite that of EC338. The similarity of expression levels and the advantage of stress resistance of E. pellita suggested that genes with significant differences in expression are likely to be related to disease resistance. The GSEA enrichment based on GO annotation revealed that the carbohydrate binding pathway (GO:0030246) is differentially expressed between EC338 and EC333. The gene pathway that differentially expressed between EC338 and EC333, was revealed by GSEA enrichment based on KEGG annotation, is Sesquiterpenoid and Triterpenoid biosynthesis (EGR00909). The Alternative Splicing analysis demonstrated that the AS events gene between EC338 and EC333 is LOC104426602. According to SNP analysis, EC338 has 626 more high-impact mutation loci than the male parent P9060, and 396 more than the female parent W1767, the maternal parent W1767 has 259 more mutation loci in the downstream region than EC338, while the male parent P9060 has 3107 fewer mutation loci in the downstream region than EC338. Additionally, EC338 has 9631 more mutation loci in the exon region than EC333. These findings suggested that the genetic pathways, specific gene regions, and their quantities might play crucial roles in the formation of heterosis linked to the resistance against eucalypt leaf blight. The modules were found in WGCNA, which were strongly and oppositely correlated with EC338 and EC333, such as module MEsaddlebrown is likely to be associated with leaf blight resistance. (4) The present study provides a detailed explanation of the genetic basis for the heterosis of resistance to eucalypt leaf blight, providing a basis for exploring genes related to resistance to eucalypt leaf blight.

Microbial composition across substrates in mangroves, particularly in the Middle East, remains unclear. This study characterized bacterial communities in sediment, water, Terebralia palustris snail guts, and plastic associated with Avicennia marina mangrove forests in two coastal lagoons in the Sea of Oman using 16S rDNA gene MiSeq sequencing. The genus Vibrio dominated all substrates except water, which featured unique genera Sunxiuqinia and Pseudomonas. There were significant differences in bacterial communities on different substrata, in particular plastic. Snail guts harbored the highest number of unique Operational Taxonomic Units (OTUs) in both lagoons. Plastic in the polluted Sawadi lagoon with low salinity harbored distinct genera like Vibrio, Aestuariibacter, Zunongwangia, and Jeotgalibacillus absent in Qurum lagoon with higher salinity and low pollution. Sawadi lagoon exhibited higher species diversity in sediment and plastic substrates, Qurum lagoon demonstrated lower overall species diversity. The PCA indicates that environmental factors like salinity, pH, and nutrient levels significantly influence bacterial community composition across substrates. Variations in organic matter and potential anthropogenic influences, particularly from plastics, further shape bacterial communities. This study highlights the complex microbial communities in mangrove ecosystems, emphasizing the importance of considering multiple substrates in mangrove microbial ecology studies.

Water supply policy is closely linked to sustainability as it directly influences the conservation and management of vital natural resources. This policy focuses on developing regulations and designing various activities related to the preser-vation of water resources, which can promote both ecological and economic sustainability. This study focuses on the Challenges of the Israeli Water Sector in Times of Emergency. In a time of growing climate crisis and despite the global warming trend, Israeli citizens routinely enjoy a regular constant supply of clean fresh water, thanks to local desalina-tion plants. Establishment of the desalination plants has become a model of water management for many countries in an era of growing climate crisis. At the same time, Israel’s water sector is faced with challenges and threats related to earthquakes and various states of warfare and security confrontations. In such times of emergency, Israel’s water sector is particularly vulnerable to disruptions of the water infrastructure and it’s adequate operation, by both contamination of the water sources and damage to the desalination plants. This study examines the challenges of the Israeli water sec-tor that require it to contend with these emergency situations in an era of reliance on desalination plants. The research method combines analysis of statistical data extracted from Israel’s Central Bureau of Statistics, Government Water and Sewage Authority, and Meteorological Service, in addition to reading and analyzing primary documents generated by various government ministries and government organs related to Israel’s water policy. The research findings lead to the conclusion that public policy on managing the water sector, manifested in the development and establishment of water desalination plants, has resolved Israel’s water crisis, put an end to its dependency on the amount of precipitation and on natural water sources, and allowed an increase in water production to match the rise in consumption. Nonetheless, as successful as this public policy may be, it does not consider the possibility of extreme scenarios and does not develop the entire range of steps necessary to confront them, and thus undermines the ability of the Israeli water sector to provide its citizens with water in times of emergency.

In recent years, 360o videos have gained the attention of researchers investigating their educational potential. Given the ongoing debate about their impact on learning, particularly with young students where existing research is minimal, a comprehensive study was conducted to evaluate their effectiveness relative to other media forms. The study involved 44 kindergarten students learning about wild animals over nine sessions. The 360o videos were compared to printed materials and conventional videos to measure knowledge acquisition, motivation, enjoyment/positive feelings, immersion, and ease of use. The findings suggest that, compared to printed materials, 360o videos enhance knowledge acquisition. However, this advantage does not extend to comparisons with conventional videos. Similarly, while enjoyment and motivation were higher for 360o videos compared to printed materials, they did not surpass those associated with conventional videos. Despite their potential, 360o videos were deemed the least easy to use, likely due to the employment of low-cost HMDs. Immersion emerged as the only factor where 360o videos excelled, demonstrating a notable influence on learning outcomes. The implications of the study are also discussed.

The main objective of this study is to analyze the impact of investment in Research & Development on the performance and value of companies, that is, to try to explain how R&D investment influences the companies’ performance. For this purpose, a dynamic panel data model was estimated using the Generalized Method of Moments, which made possible to measure the impact of R&D investment on performance through the Return on Operating Assets ratio for the Portuguese companies that invested the most between 2012 to 2019. The results show that the investment in R&D is not statistically significant in explaining the operating return on assets. However, the lagged financial performance in one period, the leverage, the asset turnover ratio and the accounts payable turnover show to have impact on the variable under study.

This paper, from the perspective of Mode 3 of knowledge production, takes the important carrier of knowledge, scientific research papers, as the research object. The mainstream databases (SCIE and SSCI) are chosen as the data sources. Firstly, bibliometric methods are applied to analyze the cooperation status among the main bodies of paper production, including authors and their affiliated institutions, countries, and disciplines; secondly, the Analytic Hierarchy Process (AHP) is used to construct a comprehensive evaluation model for the state of research cooperation in carbon neutrality. Based on the evaluation model, the cooperation characteristics of different disciplinary fields and the relationship between paper cooperation status and high-impact research papers are comparatively analyzed. At the same time, an analysis is conducted on the support from the government, the sponsorship from enterprises, and the participation of the public in the process of paper production. Finally, some suggestions are put forward on how to build an innovative ecosystem for carbon neutrality research from the perspective of Mode 3 of knowledge production.

Background: Physiotherapy and chronic low back pain (CLBP) form a broad and fast developing research area. The aim of the article was to holistically, thematically and chronologically analyze and synthesise literature production and identify most prolific research entities and research themes. Methods: The article quantitatively and quantitatively analyzed research literature production harvested from the Scopus bibliometric database. using a triangulation of bibliometric and thematic analysis. For this, Excell and VOSwiever software were used. Results: In the Scopus database, 2843 data sources were found, which were published between 1974 and February 26, 2024. The growth trend has been linearly positive since the beginning of publication, and after 2018, exponential growth began. A review of the most prolific entities showed that the most literature was published in America, Europe and Australasia. The thematic analysis of the information sources identified six main themes, while the chronological analysis revealed three main areas of developments: assessment tools, CLBP processing and study methodology. Conclusions: The results of the bibliometric study presents a good starting point for further research providing Taxonomy and research landscapes as a holistic framework offering multidisciplinary knowledge about CLBP, while chronological analysis provides a basis for identifying prospective research trends.

The exponential growth of maritime traffic has brought with it a multitude of business opportunities, while at the same time posing unprecedented challenges in terms of control and surveillance. Traditional methods struggle to cope with the sheer volume and complexity of maritime activities, which calls for innovative solutions. This study presents a comparative analysis of three prominent computing object detection models applied to maritime surveillance. By evaluating their performance metrics in dynamic maritime environments, this study provides information on the most suitable model for effective maritime monitoring applications, attaining an impressive 91\% mean Average Precision (mAP) using the YOLOv5n model.

Under the quaternion group, $Q_8$, spin helicity emerges as an element of reality, and complementary to spin polarization. Here we show that the correlation in EPR coincidence experiments is conserved upon separation from a singlet, being divided between polarization and coherence. Including helicity accounts for the violation of Bell's Inequalities without non-locality.

This paper explores factors affecting Out-of-Pocket payments for healthcare expenditures in SAARC countries. The specific objectives of the paper were to compare healthcare expenditure patterns amongst the SAARC countries and explore the macroeconomic, demographic and social factors influencing OOP payments for healthcare these countries. The model selection tests suggest that the fixed effect model is the most appropriate for the data, though the random effect model also provides valuable insights. Fixed effect model result showed that a 1 per cent change in GDP per capita, consumer price index, population aged 65 years and above causes change in out-of-pocket payments for healthcare by 1.08 per cent (p< 0.01), 0.09 per cent (p< 0.05), 1.20 per cent (p

Parents play an important role in shaping the eating habits of their children through: appropriate selection of food products, snacking between meals and appropriate exposure to information from television advertisements, the press or the Internet. The level of parents' knowledge about proper nutrition and substances added to food is therefore crucial in promoting appropriate dietary choices in children and adolescents in order to prevent diet-related diseases. Objectives: Assessment of the consumption of snack foods by children and adolescents according to the surveyed parents and analysis of parents' knowledge about additional substances in food. Methods: The study was conducted among 129 parents of students from selected primary schools. The research tool was an original survey questionnaire consisting of 24 questions. Survey interviews were conducted with parents during meetings at schools. Statistical analysis was performed using the Pearson ch2 test, the significance level was set to p&lt;0.05. Results: Parents most often indicated sweets, confectionery products and sweetened drinks (25%) and vegetables or fruit (21%) as the form of snack for their children. 46% of children and adolescents drank sweetened drinks at least once a day. Parents had an average level of knowledge about food additives. Significant correlations were found between the level of knowledge of parents of school-age children about food additives and their level of education. Parents' knowledge and education did not significantly influence the level of snack consumption by their children. Children's eating behavior should be considered unsatisfactory. Conclusions: Research has shown the need for parents to be educated about food additives and to pay more attention to reading food labels so that they can reliably prepare their children to make the right food choices. Measures should be implemented to improve the eating habits of children and adolescents.

This research explores the development of thermoplastic vulcanizate (TPV) blends derived from natural rubber (NR) and ethylene-butene copolymer (EBC) using a specific blend ratio and melt mixing technique. A comprehensive full factorial design of experiments (DOE) methodology is employed to optimize the processing parameters. TPVs are produced through dynamic vulcanization, combining rubber crosslinking and melt blending within a thermoplastic matrix under high temperatures and shear. The physico-mechanical properties of these TPVs are then analyzed. The objective is to enhance the mechanical performance by assessing the influence of blend ratio, mixing temperature, rotor speed, and mixing time on crucial properties, including tensile strength, elongation at break, compression set, tear strength, and hardness. Analysis of variance (ANOVA) identifies the optimal processing conditions that significantly improve material performance. Validation is achieved through atomic force microscopy (AFM), confirming the phase-separated structure and thus a success of dynamic vulcanization. Rubber process analyzer (RPA) and dynamic mechanical analyzer (DMA) assessments provide insights into the viscoelastic behavior and dynamic mechanical responses. Deconvolution analysis of temperature-dependent tanδ peaks reveals intricate microstructural interactions influencing the glass transition temperature (Tg). The optimized TPVs exhibit enhanced stiffness and effective energy dissipation capabilities across a wide temperature range, making them suitable for applications demanding thermal and mechanical load resistance. This study underscores the pivotal role of precise processing control in tailoring the properties of NR/EBC TPVs for specialized industrial uses. It highlights the indispensable contribution of the DOE methodology to TPV optimization, advancing material science and engineering, particularly for industries requiring robust and flexible materials.

As technology advances, people are increasingly adopting IoT (Internet of Things) devices in smart cities. These devices are equipped with sensors that are connected everywhere, from energy infrastructure and transportation to telecommunications, health and human services, waste management, public safety, and more. People want to access sensor data anytime and everywhere to make better decisions and improve their lives. To achieve this, a sensor integration model has been developed where multiple sensors are integrated under one gateway to manage and share sensor data. However, effective sharing of sensor data requires data security, privacy, confidentiality, fairness, effective architectural design, and low communication and computation costs. These issues need to be addressed in the sensor integration model in smart cities. Existing storage models face challenges in managing sensor data effectively. To overcome these issues and hurdles, a data storage framework leveraging blockchain technology has been proposed within the sensor integration model. This framework ensures data security, privacy, confidentiality, and a fair and transparent financial model, all while minimizing communication and computation costs.

The field of microbial pathogenesis seeks to identify the agents and mechanisms responsible for disease causation. Since Robert Koch introduced postulates that were used to guide the characterization of microbial pathogens, technological advances have substantially increased the capacity to rapidly identify a causative infectious agent. Research efforts currently focus on causation at the molecular level with a search for virulence factors (VFs) that contribute to different stages of the infectious process. We note that the quest to identify and characterize VFs sometimes lacks scientific rigor, and this suggests a need to examine the epistemology of VF characterization. We took this premise as an opportunity to explore the epistemology of VF characterization. In this perspective, we discuss how the characterization of various gene products that evolved to facilitate bacterial survival in the broader environment have potentially been prematurely mischaracterized as VFs that contribute to pathogenesis in the context of human biology. Examples of the reasoning that can affect misinterpretation, or at least premature assignment of mechanistic causation, are provided. Our aim is to refine categorization of VFs by emphasizing a broader biological view of their origin.

The advancement of mechanization in forestry has bolstered productivity within the sector while simultaneously precipitating impacts necessitating deeper comprehension for the attainment of heightened levels of environmental sustainability in forestry management. The aim of this study was to apply an instrument for assessing the environmental damage and impacts of forest harvesting in commercial Eucalyptus plantations, based on a combination of methodologies. The environmental impact assessment methodology for forest harvesting was applied by combining interaction network approaches and impact assessment matrices. This methodology was then applied to a commercial Eucalyptus plantation in the municipality of São Pedro, state of São Paulo, Brazil. The results show that timber transportation activities had the highest positive and negative environmental indices. The most significant negative impacts refer to the depletion of water resources and erosion, while the positive impacts are regional development and job creation. The most significant changes, both positive and negative, were observed in a greater number of environmental impacts for the physical and anthropic environment, with fewer for the biotic environment. The combination of methodologies has potential as an expedient tool for planning forestry operations, providing practical results for decision-making, making production more sustainable and applicable to different crops and production systems.

The volume of fluid (VOF) method is a popular technique for the direct numerical simulations of flows involving immiscible fluids. A discrete volume fraction field evolving in time represents the interface, in particular, to compute its geometric properties. The height function method (HF) is based on the volume fraction field, and its estimate of the interface curvature converges with second-order accuracy with grid refinement. Data-driven methods have been recently proposed as an alternative to computing the curvature, with particular consideration for a well-balanced input data set generation and symmetry preservation. In the present work, a two-layer feed-forward neural network is trained on an input data set generated from the height function data instead of the volume fraction field. The symmetries for rotations, reflections, and the anti-symmetry for the phase swapping have been considered to reduce the number of input parameters. The neural network, establishing a correlation between curvature and height function values, can efficiently predict the local interface curvature. We compare the trained neural network to the standard Height Function method to assess its performance and robustness.

: This study aims at exploring Turkish consumers’ behaviors toward purchasing green fashion. A mixed-methods approach was used in this study. Six experts from the main brands in the fashion industry in Türkiye were interviewed. A total of 268 questionnaires were collected from Turkish consumers, and their responses were analyzed. The theory of planned behavior (TPB) informed the theoretical framework of this study. The main components of the TPB were extended to include perceived consumer effectiveness. A thematic analysis was conducted to analyze and code the interviews. To test the hypotheses, structural equation modeling (SEM) was conducted. The findings show that the key factors of the TPB, i.e., attitudes (ATTs), subjective norms (SNs), and perceived behavioral control (PBC), as well as perceived consumer effectiveness, significantly impact the intentions of Turkish consumers to purchase sustainable fashion. However, the results highlight some inconsistencies, gaps, and barriers that discourage the purchase intentions of consumers, including a lack of information, misinformation, greenwashing, green skepticism, a lack of trust, and the high cost of sustainable fashion.

Identifying the primary site of origin of metastatic cancer is vital for guiding treatment decisions, especially for patients with cancer of unknown primary (CUP). Despite advanced diagnostic techniques, CUP remains difficult to pinpoint and is responsible for a considerable number of cancer-related fatalities. Understanding its origin is crucial for effective management and potentially improving patient outcomes. This study introduces a machine learning framework ONCOfind-AI that leverages transcriptome-based gene set features to enhance the accuracy of predicting the origin of metastatic cancers. By ensuring compatibility between RNA-sequencing and micro-array data, we were able to construct a more comprehensive training dataset. Integrating data from different platforms improved the accuracy of our machine learning models for predicting cancer origins. Our method was validated using external data from clinical samples collected through Kangbuk Samsung Medical Center and the Gene Expression Omnibus. The external validation results demonstrated a top-1 accuracy ranging from 0.80 to 0.86, with a top-2 accuracy of 0.90. This study highlights that incorporating biological knowledge through curated gene sets can merge gene expression data from different platforms, enhancing the compatibility needed for more effective machine learning prediction models.

Tremor is a prevalent neurological disorder characterized by involuntary shaking or trembling of body parts. This condition impairs fine motor skills and hand coordination to varying degrees and can even affect overall body mobility. As a result, tremors severely disrupt the daily lives and work of those affected, significantly limiting their physical activity space. This study developed an innovative Spatial Augmented Reality (SAR) system aimed at assisting individuals with tremor disorders to overcome their physical limitations and expand their range of activities. The system integrates eye-tracking and Internet of Things (IoT) technologies, enabling users to smoothly control objects in the real world through eye movements. It employs a virtual stabilization algorithm for stable interaction with objects in the real environment. The study comprehensively evaluated the system's performance through three experiments: 1) assessing the effectiveness of the virtual stabilization algorithm in enhancing the system's ability to assist individuals with tremors in stable and efficient interaction with remote objects; 2) evaluating the system's fluidity and stability in performing complex interactive tasks; 3) investigating the precision and efficiency of the system in remote interactions within complex physical environments. The results demonstrate that the system significantly improves the stability and efficiency of interactions between individuals with tremor and remote objects, reduces operational errors, and enhances the accuracy and communication efficiency of interactions.