Food security (FS) during infancy is associated with lifelong outcomes. New Zealand is a developed economy that reports poor childhood nutrition-related health statistics, particularly among minority children, yet has no measure of FS applicable to infancy. The objective was to develop a FS index for New Zealand infants and examine its association with demographic covariates and health outcomes. Within a large (n=6853) nationally representative cohort, variables describing infant food consumption, breastfeeding, and maternal food-related coping methods were collected from mothers during late infancy. A FS index was derived using confirmatory factor analysis. Associations were assessed by logistic regressions and described using odds ratios (OR) and ≥95% confidence intervals (CI). 15% of the cohort was highly FS, 43% tenuously food insecure (FIS), and 16% highly food insecure (FIS). Infants from minority ethnic groups had lower odds of being food secure, as did those born to the youngest mothers, mothers who smoked, or lived in low-income households. FIS infants had higher odds of morbidity. Interventions to improve infant FS should focus on improving dietary quality, and give particular consideration to minority infants. We identified that FIS shows wide ethnic and socioeconomic inequity, and is associated with poorer health. The most important driving factors of FIS included poor quality weaning diets, and poverty and its proxies. Any interventions to improve infant FS should focus on increasing fruit and vegetable consumption to recommended intake levels, and give particular consideration to minority infants.

COVID-19 is now a major global health crisis, can lead to severe food crisis unless proper measures are not taken. Though a number of scientific studies have addressed the possible impacts of COVID-19 in Bangladesh on variety of issues, problems and food crises associated with aquatic resources and communities are missing. Therefore, this study aimed at bridging the gap in the existing situation and challenges of COVID-19 by linking its impact on aquatic food sector and small-scale fisheries with dependent population. The study was conducted based on secondary data analysis and primary fieldwork. Secondary data focused on COVID-19 overview and number of confirmed, recovered and death cases in Bangladesh; at the same time its connection with small-scale fisheries, aquatic food production, demand and supply was analyzed. Community perceptions were elicited to present how the changes felt and how they affected aquatic food system and small-scale fisheries and found devastating impact. Sudden illness, reduced income, complication to start production and input collection, labor crisis, transportation abstraction, complexity in food supply, weak value chain, low consumer demand, rising commodity prices, creditor’s pressure were identified as the primary affecting drivers. Dependent people felt the measures taken by the Government should be based on protecting the health and food security, although it could be detrimental to economic growth in the short term. The study provides insight into policies adopted by the policy makers to mitigate the effects of the pandemic on aquatic food sector and small-scale fisheries.

Vehicle to vehicle (V2V) and Vehicle to infrastructure (V2I) or briefly V2X communications are the one of hot topics in automotive industry. Therefore, this situation is providing many advantages of connected vehicles and infrastructures which bring to human life. For instance, vehicles and road infrastructures which shares information with each other, provides a neat flow regulation, more ordered traffic flow and therefore jammed traffic dependent accident’s percentage will be decreased. On the other hand, security is the most important issue for these systems because the operation of V2X networks is completely dependent on uninterrupted and accurate information sharing. In the light of these information, in this paper we review security issues and current solution architectures. We also propose some open problems in this lively field.

Background: Cyber Security is to protect online data and software from cyber threats. These cyberattacks are typically intended to gain access to, change, or delete sensitive information; extort money from users; or disrupt regular corporate activities. It is difficult to keep up a regular follow up with new technologies so it is necessary to keep the important data safe from cyber threats. There are many types of cyber threats; malware, ransom-ware, social engineering, phishing etc. To prevent cyber-attacks one can use password manager tools like LastPass and others. People also use two factor authentication for double security on their accounts. Methods: Boards such as the National Institute of Standards and Technology (NIST) are developing frameworks to assist firms in understanding their security risks, improving cybersecurity procedures, and preventing cyber assaults. The fight against cybercrimes and attack, rganisations needed a strong base there are 5 types of cyber securities; Critical Infrastructure Security, application security, network security, cloud security and (IoT) Security. In the modern time US is highly based on computers and on different software so it is really important for US to be more conscious about the security as they get many threats almost everyday for hacking their data and accounts.Results and Conclusion: Nowadays, even small businesses rarely recover their loss from the cyber-attacks and many back-off from continuing their businesses after being target of hackers. The first cybercrime attack was recorded on 1988 by a graduate student. Now that large companies and even small businesses are aware of cyber-attacks so they try their best to take every precaution to prevent the hacking with double security and password manager tools.

This paper intends to discuss SSLs, how they work, their advantages and drawbacks. It will end with the author’s thoughts on the efficacy of the system and whether it is a viable solution for the majority of network security problems or if those drawbacks prevent that.

State legitimacy and effectiveness could be seen by the way to deliver welfare to citizens to mitigate social grievances, that could eventually lead to conflicts (Kivimäki, 2021). Social security systems in Maghreb countries are quite similar in their architecture and aims to provide social insurance to all the workers in the labor market. However, they suffer from the same main problem: the low rate of enrollment of workers. Many workers (employees and self-employed) work informally without any social security coverage. The issue of whether informal jobs are chosen voluntarily by workers or as a strategy of last resort is controversial. Many authors recognize that the informal sector is heterogeneous and it is made up of workers who voluntary choose it and others who are pushed inside because of entry barriers to the formal sector (Günther & Launov, 2012). Using the SAHWA survey and discrete choice models, this article confirms the heterogeneity of the informal labor market in three Maghreb countries: Algeria, Morocco, and Tunisia. Furthermore, this article highlights the profiles of workers who voluntarily choose informality, which is missing from previous studies. Finally, this article proposes policy recommendations in order to extend social security to informal workers and to include them in the formal labour market.

Crop plants should be resilient to climatic factors in order to feed ever-increasing populations. Plants have developed stress-responsive mechanisms by changing their metabolic pathways and switching the stress-responsive genes. The discovery of plant transcriptional factors (TFs) as key regulators of different biotic and abiotic stresses have opened up new horizons for plant scientists. TFs perceive the signal and switch certain stress-responsive genes on and off by binding to different cis-regulatory elements. The above 50 species of plant TFs have been reported in nature. DREB, bZIP, MYB, NAC, Zinc-finger, HSF, Dof, WRKY, and NF-Y are important with respect to biotic and abiotic stresses whereas the role of many TFs is yet to explore. In this review, we summarize the role of different stress-responsive TFs with respect to biotic and abiotic stresses. Further, challenges and future opportunities linked with TFs for developing climate-resilient crops are also elaborated.

Global economy, financial markets and technology are on the verge of moving to a new stage of development – information society. Three major world countries the US, Russia and China will play a leading role in this process. However, the specific development path will depend on many factors, including the stability of legal systems, security of computer and financial technologies, the effectiveness of legislation. The focus of this article is to assess the current condition of the economy the major countries, to identify trends and methods of stabilization of legal systems on the basis of balance of rights and obligations of the business, suggest some methods of objective evaluation of the impact factors of the total taxes, fixed costs and the legal system dynamics on financial indicators.

The vast network of interconnected devices of the Internet of Things poses significant security challenges, necessitating the upgrade of current wireless networks to the 6G standard and an improved intrusion detection system for host networks. Thus this article therefore underscores a game theory concept to analyze the security impediments in wireless communication systems, where a host network bandwidth is jeopardized by the intruder while acting as a legitimate user. While game theory can help with the impending security concerns, network slicing is saliently proposed for large and complicated networks, precipitating a layer wise fragmentation of the concerned network and effectively addressing the security issues in different layers of the IoT framework. However, with increasing network complexity, network security issues incorporating traditional measures become increasingly cumbersome. Therefore, this paper also briefly mentions some of the ML techniques that can be used to classify and segregate valid users from the compromised nodes in the host network. The paper discusses the potential of incorporating intelligence into wireless communication systems to enhance the host network security. The paper further aids in analyzing existing security issues in different layers of wireless communication systems, underscoring network slicing for further classification of intruders from user nodes and training the host network using ML/AI per the user application specification.

Satellite Crop Detection technologies are focused on detection of different types of crops on the field in the early stage before harvesting. Crop detection is usually done on a time series of satellite data by classification of the desired fields. Currently, data obtained from Remote Sensing (RS) are used to solve tasks related to the identification of the type of agricultural crops, also modern technologies using AI methods are desired in the postprocessing part. In this challenge Sentinel-1 and Sentinel-2 time series data were used due to their periodic availability. Our focus was to develop methodology for classification of time series of Sentinel 2 and Sentinel 1 data and compare how accuracy of classification can be increased, but also how to guarantee availability of data. We analyse phenology of single crops and on the basis of this analysis we started to provide crop classification. Original crop classifications were made from Enhanced Vegetation Index (EVI) layers made from Sentinel-2 time-series data and then we added also . To increase accuracy we also integrate into the process parcel borders and provide classification of fields..

Optical networks are prone to power jamming attacks intending service disruption. This paper presents a Machine Learning (ML) framework for detection and prevention of jamming attacks in optical networks. We evaluate various ML classifiers for detecting out-of-band jamming attacks with varying intensities. Numerical results show that artificial neural network is the fastest ($10^6$ detection per second) for inference and most accurate ($\approx 100 \%$) in detecting power jamming attacks as well as identifying the optical channels attacked. We also discuss and study a novel prevention mechanism when the system is under active jamming attacks. For this scenario, we propose a novel resource reallocation scheme that utilizes the statistical information of attack detection accuracy to lower the probability of successful jamming of lightpaths while minimizing lightpaths' reallocations. Simulation results show that the likelihood of jamming a lightpath reduces with increasing detection accuracy, and localization reduces the number of reallocations required.

The integration of Unmanned Aircraft Systems (UAS) into the current airspace poses significant challenges in terms of safety, security and operability. As an example, the European Union has defined in 2019 a set of rules to support the digitalization of UAS Traffic Management (UTM) systems and services, namely the U-Space regulations. Current propositions opted for a centralized and private model, concentrated around governmental authorities (e.g., AlphaTango provides the Registration service and depends on the French government). In this paper, we advocate in favor of a more decentralized and transparent model in order to improve safety, security and operability among UTM stakeholders. As such, we propose DFly, a Publicly Auditable and Privacy-preserving UAS Traffic Management system on Blockchain, and developed two initial services: Registration and Flight Authorization. We demonstrate that the use of a blockchain guarantees the public auditability of the two services and corresponding service providers’ actions. In addition, it facilitates the comprehensive and distributed monitoring of airspace occupation and the integration of additional functionalities (e.g., the creation of a live UAS tracker). The combination with zero knowledge proofs enable the deployment of an automated, distributed, transparent and privacy-preserving flight authorization service, performed on-chain thanks to the blockchain logic. In addition to its construction, this paper details the instantiation of the proposed UTM system with the Ethereum Sepolia’s testnet and the Groth16 ZK-SNARK protocol. On-chain (gas cost) and off-chain (execution time) performance analyses confirm that the proprosed solution is a viable and efficient alternative in the spirit of digitalization and offers additional security guarantees.

After the great success of Mobile wallet, the Internet of Things (IoT) leaves the door wide open for consumers to use their connected devices to access their bank accounts and perform routine banking activities from anywhere, anytime and with any device. However, consumers need to feel safe when interacting with IoT-based payment systems, and their personal information should be protected as much as possible. Unlike as usually done in the literature, in this paper, we introduce two lightweight and secure IoT-based payment protocols based on an identity-based signature scheme. We adopt a server-aided verification technique to construct the first scheme. This technique allows to outsource the heavy computation overhead on the sensor node to a cloud server while maintaining the user's privacy. The second scheme is built upon a pairing-free ECC-based security protocol to avoid the heavy computational complexity of bilinear pairing operations. The security reduction results of both schemes are held in the Random Oracle Model (ROM) under the discrete logarithm and computational Diffie-Hellman assumptions. Finally, we experimentally compare the proposed schemes against each other and against the original scheme on the most commonly used IoT devices: a smartphone, a smartwatch and the embedded device Raspberry Pi. Compared with existing schemes, our proposed schemes achieve significant efficiency in the term of communication and computational overheads

Vehicle-to-Vehicle (V2V) communication plays a pivotal role in modern intelligent transportation systems, enabling seamless information exchange among vehicles to enhance road safety, traffic efficiency, and overall driving experience. However, the secure transmission of sensitive data between vehicles remains a critical concern due to potential security threats and vulnerabilities. This research paper focuses on investigating the security protocols employed in Vehicle-to-Vehicle communication systems. A comprehensive review and analysis of relevant literature and research papers is conducted to gather information on existing V2V communication security protocols and techniques. The analysis encompasses key areas, including authentication mechanisms, encryption algorithms, key management protocols, and intrusion detection systems specifically applicable to V2V communication networks. Within the context of real-world V2V environments, this study delves into the challenges and limitations associated with implementing these protocols. Moreover, to foster a deeper understanding, the paper investigates present communication protocols in the field of Internet of Things (IoT) that are tailored for V2V. Various parameters, such as band-width consumption, energy consumption, latency, and message size, are considered during the evaluation of these protocols to gauge their effectiveness. The research outcomes aim to provide a comprehensive understanding of the strengths and weaknesses of the current V2V communication security protocols. Furthermore, based on the findings, this paper will propose improvements and recommendations to enhance the security measures of the V2V communication protocol. Ultimately, this research will contribute to the development of more secure and reliable V2V communication systems, propelling the advancement of intelligent transportation technology.

Artificial Intelligence (AI) models are expected to have a great impact in the manufacturing industry, optimizing time and resource cost by enabling applications such as predictive maintenance (PM) of production machines. A necessary condition for this is the availability of high quality data collected as close as possible to the process in question. With the advent of 5G equipped multi sensor platforms (MSPs), high sampling rate data can be collected and transmitted for processing in real time. This poses a data security challenge, since this data may give valuable insight into confidential business information of companies. Federated learning (FL) enables the training of AI models with data from multiple sources without it leaving the shop floor, by utilizing distributed computing resources available on premise. This paper introduces an architecture of FL based on data collected from 5G MSPs for enabling PM in industrial environments and discusses its potential benefits and challenges.

Can investing in women’s agriculture increase productivity? This paper argues that it can. We assess climate impacts and gender bias on women’s production in the global South and North and challenge the male model of agricultural development to argue further that women’s farming approaches can be more sustainable. Level-based analysis (global, regional, local) draws on literature review, including authors’ published longitudinal field research in Ghana and the United States. Women farmers are shown to be undervalued and to work harder, with fewer resources, for less compensation; gender bias challenges are shared globally while economic disparities differentiate; breaches of distributive, gender, and intergenerational justices as well as compromise of food sovereignty affect women everywhere. We conclude that investing in women’s agriculture needs more than standard approaches of capital and technology investment. Effective ‘investment’ would include systemic interventions into agricultural policy, governance, education, and industry; be directed at men as well as women; and use gender metrics, e.g. quotas, budgets, vulnerability and impacts assessments, to generate assessment reports and track gender parity in agriculture. Increasing women’s access, capacity, and productivity cannot succeed without men’s awareness and proactivity. Systemic change can increase productivity and sustainability.

In the current socio-economic context, pension systems have become a crucial topic in the agenda of governments and international bodies. In this paper, an empirical study regarding the economic and social sustainability of pension systems in Central and Eastern European Countries was performed. The goal of the research is to establish the sustainability of pension systems with econometric modeling techniques on three dimensions as the research hypotheses are revealed: first, by strengthening the financial soundness of pension systems; second, consolidating the economic environment of pension systems; third, increasing the degree of social security systems with a direct effect of reducing poverty. The results led to relevant insights emphasizing the need for more inclusive economic, financial, and social reforms. From a policy perspective, these findings could be a starting point for the enhancement of the financial adequacy and economic and social sustainability of pension systems in Central and Eastern European Countries. The econometric techniques in this study highlight those modern pensions systems that need to be addressed in a more complex and empirical context that must encompass the main technical aspects. The conclusions suggest that in the future it needs judicial, economic, and social adjustments for the enhancement of the financial soundness of the pension systems.

Background: New open-source electric-grid planning models have the potential to improve power system planning and bring a wider range of stakeholders into the planning process for next-generation, high-renewable power systems. However, it has not yet been established whether open-source models perform similarly to the more established commercial models for power system analysis. This reduces their credibility and attractiveness to stakeholders, postponing the benefits they could offer. In this paper, we report the first model intercomparison between an open-source power system model and an established commercial production cost model. Results: We compare the open-source Switch 2.0 to GE Energy Consulting’s Multi Area Production Simulation (MAPS) for production-cost modeling, considering hourly operation under 17 scenarios of renewable energy adoption in Hawaii. We find that after configuring Switch with similar inputs to MAPS, the two models agree closely on hourly and annual production from all power sources. Comparing production gave a coefficient of determination of 0.996 across all energy sources and scenarios, indicating that the two models agree on 99.6% of the variation. For individual energy sources, the coefficient of determination was 69–100. Conclusions: Although some disagreement remains between the two models, this work indicates that Switch is a viable choice for renewable integration modeling, at least for the small power systems considered here. Although some disagreement remains between the two models, this work indicates that Switch is a viable choice for renewable integration modeling, at least for the small power systems considered here.

The majority of local IPv6 networks continue to remain insecure and vulnerable to neighbor spoofing attacks. The Secure Neighbor Discovery (SEND) standard and its concomitant Cryptographically Generated Addressing (CGA) scheme were accepted by large standards bodies to codify practical mitigations. SEND and CGA have never seen widespread adoption due to their complexities, obscurity, costs, compatibility issues, and continued lack of mature implementations. In light of their poor adoption, research since their standardization has continued to find new perspectives and proffer new ideas. The orthodox solutions for securing Neighbor Discovery have historically struggled to successfully harmonize three core ideals: simplicity, flexibility, and privacy preservation. This research introduces Voucher-Based Addressing, a low-configuration, low-cost, and high-impact alternative to IPv6 address generation methods. It secures the Neighbor Discovery address resolution process while remaining simple, highly adaptable, indistinguishable, and privacy-focused. Applying a unique concoction of cryptographic key derivation functions, link-layer address binding, and neighbor consensus on the parameters of address generation, resolved address bindings are verifiable without the need for complex techniques that have hindered the adoption of canonical specifications.

A Physical Unclonable Framework (PUF) is a detached hardware component or, the structural arrangement of hardware that provides natural variations in the physical parts of semiconductor devices to generate unique and unpredictable identifiers based on challenging-to-replicate. In this case, PUFs are giving us a tool to utilise these variations to create an unclonable identifier for your device. PUFs generate a response or a unique pattern based on the physical characteristics of the device, and this response is difficult to predict or duplicate. This study aims to introduce a PUK device to provide security research on the Internet of Things technology. The elliptic curve cryptography algorithm was modified with an advanced equation to calculate a private key and K value. In this study, a PUF device will be employed with a modified elliptic curve cryptography algorithm on a novel security system to be used in current and future communication technology.

The proliferation of Unmanned Aerial Vehicle (UAV) networks is increasing, driven by their capacity to deliver automated services tailored to the varied demands of numerous smart city applications. Trust, security, and privacy remain paramount in the public domain. Traditional centralized network designs fall short of ensuring device authentication, data integrity, and privacy within UAV networks’ highly dynamic and adaptable environments. Decentralized reputation systems emerge as a promising solution to enhance the reliability and trustworthiness of data and communications within these networks while safeguarding UAV security. This paper presents an exhaustive survey of trust and reputation systems, exploring existing frameworks and proposed innovations alongside their inherent challenges. It highlights the crucial role of reputation systems in strengthening trust, security, and privacy throughout these networks and discusses various strategies to mitigate existing vulnerabilities. As a useful resource for researchers and practitioners seeking to advance the state of the art in UAV network security, we hope this survey will spark further community discussion and stimulate innovative ideas in this burgeoning field.

In contemporary times, the landscape of malware analysis has advanced into an era of sophisticated threat detection. Today's malware sandboxes not only conduct rudimentary analyses but have evolved to incorporate cutting-edge artificial intelligence and machine learning capabilities. These advancements empower them to discern subtle anomalies and recognize emerging threats with a heightened level of accuracy. Moreover, malware sandboxes have adeptly adapted to counteract evasion tactics, creating a more realistic and challenging environment for malicious entities attempting to detect and evade analysis. This paper delves into the maturation of malware sandbox technology, tracing its progression from basic analysis to the intricate realm of advanced threat hunting. At the core of this evolution is the instrumental role played by malware sandboxes in providing a secure and dynamic environment for the in-depth examination of malicious code, contributing significantly to the ongoing battle against evolving cyber threats. In addressing the ongoing challenges of evasive malware detection, the focus lies on advancing detection mechanisms, leveraging machine learning models, and evolving malware sandboxes to create adaptive environments. Future efforts should prioritize the creation of comprehensive datasets, distinguish between legitimate and malicious evasion techniques, enhance detection of unknown tactics, optimize execution environments, and enable adaptability to zero-day malware through efficient learning mechanisms, thereby fortifying cybersecurity defences against emerging threats.

Static and dynamic analysis of website security risks is generally used for website security meas-urements. The website security measurements method recently proposed includes similarity hash-based website security risk analysis and machine learning-based website security risk anal-ysis. In this study, a method that can be performed through information disclosed on the Internet was proposed to measure the risk of a website. DNS information, IP information, and website history information are required to measure the risk of a website. In addition, global traffic rank-ing, malicious code distribution history, and HTTP access status can be checked in the website history information. In this study, information related to the security risk of websites in a total of 2,000 domains was collected and analyzed in 1,000 normal and malicious domains. Through the experiment results, 11 open information collection items were selected to measure the security risk of the website. This study presented the possibility of using public information collection to measure website security risk.

With the continuous development of network technology, complex network systems generate massive unbalanced attack traffic. Due to the severe imbalance in the quantities of normal samples and attack samples, as well as among different types of attack samples, intrusion detection systems suffer from low detection rates for rare class attack data. In this paper, we propose a geometric synthetic minority oversampling technique based on optimized kernel density estimation algorithm. This method can generate diverse rare class attack data by learning the distribution of rare class attack data while maintaining similarity with the original sample features. Meanwhile, the balanced data is input to a feature extraction module built upon multiple denoising autoencoders, reducing information redundancy in high-dimensional data and improving the detection performance for unknown attacks. Subsequently, a soft voting ensemble learning technique is utilized for multi-class anomaly detection on the balanced and dimensionally reduced data. Finally, an intrusion detection system is constructed based on data preprocessing, imbalance handling, feature extraction, and anomaly detection modules, and validated on the NSL-KDD and N-BaIoT datasets. Comparative experiments with baseline models and other state-of-the-art methods demonstrate that the proposed system improves the detection rate of rare class attack data. Furthermore, it achieves a good overall detection rate on the Internet of Things dataset (N-BaIoT), indicating its strong applicability.

With the rapid development of big data, artificial intelligence, and Internet technologies, the human-human contact and human-machine interaction have produced an explosive growth of voice data. Rapidly identifying the speaker's identity and retrieving and managing his or her speech data in the massive amount of speech data has become a major challenge for intelligent speech applications in the field of information security. This research proposes a vocal recognition technique based on information adversarial training for speaker identity recognition in massive audio and video, and speaker identification when oriented to the information security domain. The experimental results show that the method projects data from different scene channels all onto the same space and dynamically generates interactive speaker representations. It solves the channel mismatch problem and effectively improves the recognition of speaker's voice patterns across channels and scenes. It is able to separate overlapping voices when multiple people speak at the same time and reduce speaker separation errors. It realizes speaker voice recognition for information security field and achieves 89% recall rate in massive database, which has practical application value for intelligent application field.

In various countries of the global south, school feeding programs are implemented in order to alleviate short-time hunger in children, improved their nutrition and provide employment for food vendors. The impact of these programs is important not only in terms of pupils’ nutrition but also in improving farmers’ livelihoods. This study analyzes the impact of the school feeding program on smallholders' food security based on data collected in 2021 from 240 farmers surveyed in northeast Nigeria. Differently from other studies, several econometric methods are used to analyze the data, namely, binary probit regression, propensity score matching, inverse probability weighted adjusted regression and endogenous switching regression. The results show that about 40% of the beneficial smallholder farmers are food secure compared to 20% of the non-beneficiary households. Findings revealed that the Homegrown school feeding program (HGSF) positively improved smallholder farmers improve household food security status. Results provide evidence for the need to expand school feeding programs vis-a-vis interventions in facilitating farmers’ access to capital and capacity building for better integration in the supply chain.

Internet of Things (IoT) is a massive network of tiny devices connected internally and to the in-ternet. It is uniquely identified in the network (i.e. dedicated IP) and can share the information with other devices. However, the low power and low resources that distinguish IoT devices render them unsecure and targeted by different kinds of attacks since IoT devices cannot toler-ate heavy security models. Also, due to the heavy nature of famous protocols such as HyperText Transport Protocol (HTTP), it is costly to be used with IoT devices, and alternatively, different lightweight protocols are implemented to fit IoT devices. One of the prevailing protocols used over IoT networks is the Constrained Application Protocol (CoAP). Therefore, CoAP is popular, and that makes it targeted by different types of attacks. One of the major attacks that target CoAP is distributed denial of service (DDoS) attacks. DDoS aims to overwhelm the resources of the target and make them unavailable to legitimate users. As a result, different kinds of meth-ods were used to secure CoAP against DDoS attacks such as Datagram Transport Layer Secu-rity (DTLS) and Lightweight and Secure Protocol for Wireless Sensor Networks (LSPWSN). However, the existing models suffer from two issues: DTLS is not designed for constrained devices and is considered a heavy protocol. Besides, LSPWSN is working over the network layer, not in the application layer that CoAP works on. In this paper, we build a machine learn-ing model that can detect the DDoS attacks against CoAP with an accuracy of 98%. The CIDAD dataset is extended from ~11000 to 100,000 samples using GANs because it has fewer samples of malware (less than 0.2% of the total dataset). Our model outperforms the existing models that target securing CoAP in the application layer and obtains 93% of accuracy.

Objective: Food security during public health emergencies relies on situational awareness of needs and resources. Artificial intelligence (AI) has revolutionized situational awareness during crises, allowing the allocation of resources to needs through machine learning algorithms. Limited research exists monitoring Twitter for changes in the food security-related public discourse during the COVID-19 pandemic. We aim to address that gap with AI by classifying food security topics on Twitter and showing topic frequency per day. Methods: Tweets were scraped from Twitter from January 2020 through December 2021 using food security keywords. Latent Dirichlet Allocation (LDA) topic modeling was performed, followed by time-series analyses on topic frequency per day.Results: 237,107 tweets were scraped and classified into topics, including food needs and resources, emergency preparedness and response, and mental/physical health. After the WHO’s pandemic declaration, there were relative increases in topic density per day regarding food pantries, food banks, economic and food security crises, essential services, and emergency preparedness advice. Threats to food security in Tigray emerged in 2021.Conclusions: AI is a powerful yet underused tool to monitor food insecurity on social media. Machine learning tools to improve emergency response should be prioritized, along with measurement of impact. Further food insecurity word patterns testing, as generated by this research, with supervised machine learning models can accelerate the uptake of these tools by policymakers and aid organizations.

A huge number of applications available for Android-based smartphone devices have emerged over the past years. Due to which a huge number of malicious applications has been growing explosively. Many approaches have been proposed to ensure the security and quality of application in the markets. Usually, Machine Learning approaches are utilized in the classification process of malicious application detection. Calculating accurate results of characterizing applications behaviors, or other features, has a direct effect on the results with Machine Learning calculations. Android applications emerge so quickly. The behavior of current applications has gotten progressively malicious. The extraction of malware-infected features from applications is thus become a difficult task. According to our knowledge, a ton of features have been extricated in existing work however no survey has overviewed the features built for identifying malicious applications efficiently. In this paper, we will in general give an extensive review of such sort of work that identifies feature applications by describing various practices of uses with various kinds of features. In this survey we have discussed the following dimensions: extraction and selection of feature methods if any, methods of detection and evaluation performed. In light of our review, we notice the issues of investigating malware-affected features from applications, give the scientific categorization and demonstrate the future headings.

The COVID-19 pandemic introduced risks and challenges to global food and nutrition security. In this paper, we examine the impact of the COVID-19 pandemic on the nutritional intake of China's rural residents using panel data and a fixed effect model. The data were collected in 2019 and 2020 and covered nine provinces and 2,631 households in rural China. The results reveal that an increase of 100 confirmed cases in a county resulted in a 1.48% (p<0.01), 1.46% (p<0.01), 1.77% (p<0.01), and 1.23% (p<0.01) decrease in per capita intake of dietary energy, carbohydrates, fats, and proteins, respectively. Moreover, the COVID-19 pandemic only had a significant and negative effect on dietary energy intake in the low-income group at the 5% level of significance. Our study indicates that the potential insufficient nutrition situation, nutritional imbalance, and dietary imbalance of low-income rural residents should be addressed appropriately.

In recent years supply chains have evolved into huge ecosystems, demanding trust, provenance, and data privacy. Since blockchain technology (BCT) allows for the development of a distributed environment, it is ideal for supply chain management (SCM) applications. However, concerns regarding data privacy have impeded the development of blockchains. Despite the fact that some blockchains can restrict participants to read and write data, the blockchain’s transparency makes protecting sensitive data challenging. To solve the data privacy challenge, this paper proposes a framework, AccessChain, that is an SCM access control framework based on an attribute-based access control (ABAC) model that restricts access to competing parties while allowing for network scalability. This proposed AccessChain model has two types of ledgers in the system: local and global. Local ledgers are used to store business contracts between stakeholders and the ABAC model management, whereas the global ledger is used to record transaction data. AccessChain can enable decentralized, fine-grained and dynamic access control management in SCM when combined with the ABAC model and BCT. This paper’s experimental results illustrate that high throughput can be achieved in a large-scale request environment while maintaining data privacy and sustaining a scalable network.

Despite the acknowledged relevance of renewable energy sources, biofuel production supported by food-related agriculture has faced severe criticism. One way to minimize the considered negative impacts is the use of sources of non-food biomass or wastes. Synthetic biology (SB) embraces a promising complex of technologies for biofuel production from non-edible and sustainable raw materials. Therefore, it is pertinent to identify the global evolution of investments, concepts, and techniques underlying the field in support of policy formulations for sustainable bioenergy production. We mapped the SB scientific knowledge related to biofuels using software that combines information visualization methods, bibliometrics, and data mining algorithms. The United States and China have been the leading countries in developing SB technologies. Technical University of Denmark and Tsinghua University are the institutions with higher centrality and have played prominent roles besides UC-Los Angeles and Delft University Technology. We identified six knowledge clusters under the terms: versatile sugar dehydrogenase, redox balance principle, sesquiterpene production, Saccharomyces cerevisiae, recombinant xylose-fermenting strain, and Clostridium saccharoperbutylacetonicum N1-4. The emerging trends refer to specific microorganisms, processes, and products. Yarrowia lipolytica, Oleaginous yeast, E. coli, Klebsiella pneumoniae, Phaeodactylum tricornutum, and Microalgae are the most prominent microorganisms, mainly from the year 2016 onwards. Anaerobic digestion, synthetic promoters, and genetic analysis appear as the most relevant platforms of new processes. Improved biofuels, bioethanol, and N-butanol are at the frontier of the development of SB-derived products. Synthetic biology is a dynamic interdisciplinary field in environmentally friendly bioenergy production pushed by growing social concerns and the emergent bioeconomy.

Nowadays, cloud computing is one of the important and rapidly growing paradigms that extend its capabilities and applications in various areas of life. The cloud computing system challenges many security issues, such as scalability, integrity, confidentiality, and unauthorized access, etc. An illegitimate intruder may gain access to the sensitive cloud computing system and use the data for inappropriate purposes that may lead to losses in business or system damage. This paper proposes a hybrid unauthorized data handling (HUDH) scheme for Big data in cloud computing. The HUDU aims to restrict illegitimate users from accessing the cloud and data security provision. The proposed HUDH consists of three steps: data encryption, data access, and intrusion detection. HUDH involves three algorithms; Advanced Encryption Standards (AES) for encryption, Attribute-Based Access Control (ABAC) for data access control, and Hybrid Intrusion Detection (HID) for unauthorized access detection. The proposed scheme is implemented using Python and Java language. Testing results demonstrate that the HUDH can delegate computation overhead to powerful cloud servers. User confidentiality, access privilege, and user secret key accountability can be attained with more than 97% high accuracy.

The obligation to keep a distance from other people due to the pandemic has changed human life patterns, especially in shopping for their primary needs, namely food. The presence of the food marketplace presents new hope in maintaining health and food availability without crowding with other people while shopping. The main problem that is often a concern of the public when shopping online is transaction security and the Ease of use of this food marketplace application. This research is the intensity of using the Food Marketplace in terms of Interest, transaction security, and Ease of use of this application. Researchers analyzed the relationship between variables with the Structural equation model. Respondents who became this sample were 300 application users spread across various major cities in Indonesia. This study's results provide a view that the intensity of the food marketplace's use has increased significantly during the new normal life. This paper's primary value lies in providing a better understanding of consumer behavior in the Indonesian food marketplace that has not been previously researched. By examining the determinants of the intensity of marketplace use in the food sector, it is hoped that this can become the basis for further research.

The impact that new technologies have on all aspects of our lives, work, and businesses is significant and growing over time. Blockchain and artificial intelligence, among other innovative technologies, are having a profound effect on practically all business functions, including most human resources (HR) tasks. The HR sector is currently facing a variety of challenges as HR departments invest many hours in vetting candidates' applications and authenticating records to decrease the chances of imperfect recruiting. Nowadays, more technologically based processes are utilised for talent search, selection and management, as well as for accumulating, retaining, and integrating new talents into a company. These HR practices are far more effective compared to traditional methods but can also be more expensive if the transactional costs are considered. This paper consists of two parts. Following an introduction, the first part discusses the trust and confidentiality that can be attained, while the second part examines security, fraud prevention and the productivity gained from using blockchain technology in HR activities. Finally, there is a concluding section, discussing the implications of blockchain technology for firms who choose to employ it.

Smart city infrastructure has a significant impact on improving the quality of humans life. However, a substantial increase in the urban population from the last few years is posing challenges related to resource management, safety, and security. In order to ensure safe mobility and security in the smart city environment, this paper proposes a novel Artificial Intelligence (AI) based approach empowering the authorities to better visualize the threats and to help them identify the highly-reported crime zones yielding greater predictability of crime hot-spots in a smart city. To this end, it first investigates the Hierarchical Density-Based Spatial Clustering of Applications with Noise (HDBSCAN) to detect the hot-spots that have a higher risk of crimes to be committed. Second, for crime prediction, Seasonal Auto-Regressive Integrated Moving Average (SARIMA) exploited in each dense crime region to predict the number of crimes in the future with spatial and temporal information. The proposed HDBSCAN and SARIMA based crime prediction model is evaluated on ten years of crime data (2008-2017) for New York City (NYC). The accuracy of the model is measured by considering different time period scenarios i.e. (a) year-wise, i.e., for each year and (b) for the whole period of ten years, using an 80:20 ratio where 80\% data was used for training and 20\% data was used for testing. The proposed approach outperforms with an average Mean Absolute Error (MAE) of 11.47.

Unmanned aerial systems (UASs) create an extensive fighting capability of the developed military forces. Particularly, these systems carrying confidential data are exposed to security attacks. By the wireless’s nature within these networks, they become susceptible to different kinds of attacks, hence, it seems essential to design the appropriate safety mechanism in such networks. The sinkhole attack is one of the most dangerous and threatening attacks amongst types of attack in UAS. A malicious UAV exists in such a threat attacking as a black hole for absorbing all traffic in the network. Mainly, in a Flow-based protocol, the attacker considers the requests on the route, then, it replies to the target UAV such as high quality or the best route towards Gard station. The malicious UAV is able to only insert itself on one occasion between the nodes relating to each other (such as sink node and sensor node), and act for passing packets among them. In this study, the malicious attacks are detected and purged using two stages were. In the first stage, some principles and rules are used to detect black hole, gray hole, and sinkhole attacks. In the second stage, using a smart agent-based strategy negotiation procedure for three steps, a defense mechanism is designed to prevent these attacks. The smart agent is used by reliable neighbors via the negotiation procedure for three steps, hence, the traffic formed by the malicious UAV is not considered. The suggested protocol is called SAUAS. Here, the technique is assessed through extensive simulations performed in the NS-3 environment. Based on the simulation outcomes, it is indicated that the UAS network performance metrics are enhanced based on the packet delivery rate, detection rate, false-negative rate and false-positive rate.

Microplastics have already been detected in various human foods, especially seafood. This problem should be especially pertinent to the Taiwanese public because a relatively high proportion of people‘s diet comes from seafood. We therefore present a pilot study of microplastic contamination of seafood products commonly consumed by Taiwanese people. We examined six batches of three seafood species for the presence of microplastics using FTIR spectroscopy. A total of 107 seafood individuals from three species (hard clam Meretrix lusoria, oyster Crassostrea gigas, Loligo squid Loliginidae spp.) weighing a total of 994 grams yielded a total of 100 microplastic particles consisting of nine different polymer types. 91% of microplastic particles were fragments which likely originated from fragmented plastic debris which was then consumed by the seafood species. The mean number of microplastics/kg was 87.9 microplastics/kg across the three examined species. Given that Taiwanese average about 10 kg of seafood consumption per year, we estimate that a few thousand microplastic particles are annually consumed on average. The methodology of this pilot study can now be used to conduct examinations of more seafood species and samples.

Directional modulation (DM), as an emerging promising physical layer security (PLS) technique at the transmitter side with the help of an antenna array, has developed rapidly over decades. In this study, a DM technique using a polarization sensitive array (PSA) to produce the modulation with different polarization states (PSs) at different directions is investigated. A PSA, as a vector sensor, can be employed for more effective DM for an additional degree of freedom (DOF) provided in the polarization domain. The polarization information can be exploited to transmit different data streams simultaneously at the same directions, same frequency, but with different PSs in the desired directions to increase the channel capacity, and with random PSs off the desired directions to enhance PLS. The proposed method has the capability of concurrently projecting independent signals into different specified spatial directions while simultaneously distorting signal constellation in all other directions. The symbol error rate (SER), secrecy rate, and the robustness of the proposed DM scheme are analyzed. Design examples for single- and multi-beam DM systems are also presented. Simulations corroborate that 1) the proposed method is more effective for PLS; 2) the proposed DM scheme is more power-efficient than the traditional artificial noise aided DM schemes; and 3) the channel capacity is significantly improved compared with conventional scalar antenna arrays.

This research article reports the results of a qualitative case study that correlates academic literature with five Industry 4.0 cyber trends, seven cyber risk frameworks and two cyber risk models. While there is a strong interest in industry and academia to standardise existing cyber risk frameworks, models and methodologies, an attempt to combine these approaches has not been done until present. We apply the grounded theory approach to derive with integration criteria for the reviewed frameworks, models and methodologies. Then, we propose a new architecture for the integration of the reviewed frameworks, models and methodologies. We therefore advance the efforts of integrating standards and governance into Industry 4.0 and offer a better understanding of a holistic economic impact assessment model for IoT cyber risk.

In this paper, we first investigate secure communications for a two-hop interference relay system in the wireless Internet of Things (IoT), where K source-destination pairs communicate in the presence of an eavesdropper. Explicitly, we jointly design source, relay and destination matrices upon minimizing total mean-squared error (MSE) of all legitimate destinations while keeping the MSE at eavesdropper above a certain threshold. We illuminate that the joint design of the source, relay and destination matrices subject to both secrecy and transmit power constraints. More specifically, we proposed an efficient iterative distributed algorithm to simplify the process of the joint design for optimal source, relay and destination matrices. Furthermore, the convergence of the iterative distributed algorithm is described. Additionally, the performances of the proposed algorithm, including both its secrecy rate and MSE, are characterized with the aid of simulation results. We demonstrate that our proposed algorithm outperforms the traditional approach. As a benefit, secure communications can be guaranteed by using the proposed algorithm for the multiple input multiple output (MIMO) interference relay IoT network in the presence of an eavesdropper.

In recent years, the internet of things has been widely utilized in various fields, such as in smart factories or connected cars. As its domain of application has expanded, it has begun to be employed using multi-server architectures for a more efficient use of resources. However, because users wishing to receive IoT services connect to multi-servers over wireless networks, this can expose systems to various attacks and result in serious security risks. To protect systems (and users) from potential security vulnerabilities, a secure authentication technology is necessary. In this paper, we propose a smart card-based authentication protocol, which performs the authentication for each entity by allowing users to go through the authentication process using a smart card transmitted from an authentication server, and to login to a server connected to the IoT. Furthermore, the security of our proposed authentication protocol is verified by simulating a formal verification scenario using AVISPA, a security protocol-verification tool.

Artificial Intelligence (AI) is one of the key technologies of the Fourth Industrial Revolution (Industry 4.0), which can be used for the protection of Internet-connected systems from cyber-threats, attacks, damage, or unauthorized access. To intelligently solve today's various cybersecurity issues, popular AI techniques involving Machine Learning (ML) and Deep Learning (DL) methods, the concept of Natural Language Processing (NLP), Knowledge Representation and Reasoning (KRR), as well as the concept of knowledge or rule-based Expert Systems (ES) modeling can be used. Based on these AI methods, in this paper, we present a comprehensive view on "AI-driven Cybersecurity" that can play an important role for intelligent cybersecurity services and management. The security intelligence modeling based on such AI methods can make the cybersecurity computing process automated and intelligent than the conventional security systems. We also highlight several research directions within the scope of our study, which can help researchers do future research in the area. Overall, this paper's ultimate objective is to serve as a reference point and guidelines for cybersecurity researchers as well as industry professionals in the area, especially from an AI-based technical point of view.

Communication between devices has transitioned from wired to unwired. Wireless networks have been in use widely around the globe since the advent of smartphones, IoT devices and other technologies that are compatible with wireless mode of communication. At the same time security issues have also increased in such communication methods. The aim of this paper is to propose security and privacy issues of the wireless networks and present them through comprehensive surveys. In context of security issues, there are 2 typical DDoS attacks - HTTP flood and SYN flood. Other than DDoS attacks, there are several other threats to wireless networks. One of the most prevalent include security issues in Internet of Things. In terms of privacy issues in a wireless network, location-based applications, individual data, cellular network and V2G (Vehicle to Grid) network are surveyed. The survey is hosted using questionnaire and responses of 70 participants is recorded. It is observed from the survey results that many groups of people lack the knowledge of security and privacy of wireless technologies and networks despite their increased use, however, students are relatively more aware and have strong knowledge of those issues. It is concluded from the results that an effective solution to these problems can be hosting campaigns for spreading the security and privacy laws to help the groups of people who are lagging behind in this domain of knowledge become more aware. A unique solution is also presented to overcome the security issues which include implementation of detection and mitigation techniques, implementing Blockchain in the IoT devices and implementing fog computing solutions. The unique solutions to overcome the privacy issues are proposed in the form of a privacy approach from the LBS server between pairs of users to increase the implementation of DSPM and blockchain as a solution.

Environmental monitoring systems play a crucial role in assessing environmental quality, detecting limits exceedances, and predicting potential ecological episodes. These systems rely on the measurement of various variables at specific locations and time intervals over an extended period. The concept of environmental monitoring encompasses the assessment of health and safety issues for public and environmental health purposes. Pollution of the atmosphere and water, climate change, and natural disasters are among the consequences of continuous industrial and municipal development and human interference in natural ecosystems. To address these challenges and to protect human lives and the environment, with a special concern on mitigating the ecological effects of industrial development, advanced technical solutions, including the technologies associated with artificial intelligence (artificial neural networks ANNs, machine learning ML) have been developed. These technologies offer powerful tools for analysing the vast amount of data collected by monitoring systems and extracting valuable insights. By applying ANNs and machine learning algorithms, environmental monitoring systems can effectively process and interpret the measured variables to assess environmental quality. Despite challenges and limitations, such as data quality and interpretability of AI models, ongoing research and interdisciplinary collaboration are paving the way for the successful implementation of AI in environmental monitoring, ultimately supporting informed decision-making and sustainable resource management.While several review papers have explored the theory of artificial intelligence (AI), here I aim to review the application of ANNs and ML, in environmental aspects, specifically in automotive and industrial emissions toxicity measurements, as well as atmospheric pollution prevention. By examining the potential of AI in these domains, the paper contributes to understanding the role of advanced technologies in environmental monitoring and protection.

The digital transformation of critical infrastructures, such as energy or water distribution systems, is essential for their smart management. Faster issue identification and smoother services enable better adaptation to consumers' evolving demands. However, these large-scale infrastructures are often outdated. Their digital transformation is crucial to enable them supporting societies. This process must be carefully planned, providing guidance that ensures that the data they rely on is dependable and that the system remains fully operational during the transition. This paper presents a formal model that supports reliable data acquisition in legacy critical infrastructures, facilitating their evolution towards a data-driven smart system. Our model provides the foundation for a flexible transformation process while generating dependable data for system management. We demonstrate the model's applicability in a use case within the water distribution domain and discuss its benefits.

In the intricate landscape of software development, the distinction between average and exceptional outcomes often hinges on the approach taken by the engineers involved. This paper explores the core aspects that characterize responsible and professional software engineering, emphasizing the importance of stakeholder engagement, innovative problem-solving, and adherence to standards and best practices. Through detailed real-life examples, we illustrate how professional engineers ensure the creation of robust, efficient, and adaptable software solutions. Additionally, the paper delves into advanced strategies for enhancing database security, including the implementation of Sealed Secrets in Kubernetes environments, continuous improvement, and future enhancements. The goal is to provide a comprehensive understanding of professional software engineering practices and their impact on delivering superior value to projects and organizations.

Rapid urbanization has led to many ecological problems such as landscape fragmentation, decreased landscape connectivity, and decreased biodiversity. Building an ecological security pattern is an important way to ensure ecological security and maintain sustainable urban development. Harbin is an important large-scale city in northeastern China, and the urban central district of Harbin is used as the study area. Ecological sensitivity assessment, MSPA, gravity model, landscape connectivity assessment and MCR model were used to extract ecological source areas, ecological corridors and ecological nodes in the study area to construct and optimize the ecological security pattern. Research shows that: A total of 23 ecological source areas were identified, mainly located along the Songhua River in the central part of the study area and in the mountain forest areas within the A-cheng District in the southeastern part of the study area. 48 ecological corridors were extracted, mainly in Daowai District, A-cheng District and the eastern part of Xiangfang District. There are 8 important ecological corridors and 10 important connecting corridors. 61 ecological nodes of the first level and 65 ecological nodes of the second level were extracted. High, higher, medium, lower and low security areas were classified based on the minimum cumulative resistance surface, with the highest proportion of high ecological security areas accounting for 45.75% of the study area. 65 ecological breakpoints were extracted and restoration measures were proposed. Finally, The structure of the ecological security pattern optimization of "two axes, two belts and four areas" is proposed, and corresponding ecological management measures are put forward. The experimental system of this study can provide new ideas for the construction of ecological security patterns in other regions and provide scientific support for the ecological sustainable development of similar urban areas.

Feedback from the earthquake zone in Kahramanmaraş, Turkey has established that the emerging field of Crisis Translation and Interpreting (CTInt) requires a free smartphone application, to enable Crisis Translators and Interpreters (CTIs) to access multilingual terminology resources on-/offline when assisting Search and Rescue (SAR) teams responding to man-made and/or natural disasters.The aim is to design not only a multilingual compilation of Crisis Terminology (CTerm), downloadable to smartphones enabling access when there is a failure in the internet connection, but also a unified search tool which will browse and redirect the user to existing termbanks when the internet is accessible. Nevertheless, terminological records available in the domain of CTerm are inadequate and dispersed, with different interfaces and language combinations, requiring enhancement and harmonisation. Furthermore, automated translation and interpreting software/systems supported by the multilingual compilation of the crisis terminology portal (CTermPort) ideally need to be developed or, alternatively, existing ones integrated into the crisis termbank (CTermBank) collection for those who would lack the support of CTIs.The design of the CTermPort will significantly impact civil societies by providing a lifesaving tool for CTIs who need a reliable terminological reference point and automated translation options, and those unable to be assisted. In this respect, the project also promises strong prospects of sustainability past the project duration, as the tool to be developed will serve international SAR teams working closely with CInts during response times, but also medical staff in field hospitals collaborating with CTIs in rehabilitation and recovery phases, and beyond.

The proliferation of devices for the Internet of Things (IoT) and their implication in many activities of our lives have led to a considerable increase in concern about the security of these devices, posing a double challenge for designers and developers of products. On the one hand, the design of new security primitives, suitable for resource-limited devices, that can facilitate the inclusion of mechanisms and protocols to ensure the integrity and privacy of the data exchanged over the Internet. On the other hand, the development of techniques and tools to evaluate the quality of the proposed solutions as a step prior to their deployment, as well as to monitor their behavior once in operation against possible changes in operating conditions arising naturally or as a consequence of a stress situation forced by an attacker. To address these challenges, this paper first describes the design of a security primitive that plays an important role as a component of a hardware-based root of trust, as it can act as a source of entropy for true random number generation (TRNG) or as a physical unclonable function (PUF) to facilitate the generation of identifiers linked to the device on which it is implemented. The work also illustrates different software components that allow carrying out a self-assessment strategy to characterize and validate the performance of this primitive in its dual functionality, as well as to monitor possible changes in security levels that may occur during operation as a result of device aging and variations in power supply or operating temperature. The designed PUF/TRNG is provided as a configurable IP module, which takes advantage of the internal architecture of the Xilinx Series-7 and Zynq-7000 programmable devices and incorporates an AXI4-based standard interface to facilitate its interaction with soft- and hard-core processing systems. Several test systems that contain different instances of the IP have been implemented and subjected to an exhaustive set of on-line tests to obtain the metrics that determine its quality in terms of uniqueness, reliability, and entropy characteristics. The results obtained prove that the proposed module is a suitable candidate for various security applications. As an example, an implementation that uses less than 5% of the resources of a low-cost programmable device is capable of obfuscating and recovering 512-bit cryptographic keys with virtually zero error rate.

In the era of Big Data and the Internet of Things (IoT), ensuring the security and privacy of patient data within distributed health systems is paramount. This research delves into the challenges posed by these advancements and explores viable solutions, focusing notably on blockchain technology, data encryption methods, and access control mechanisms. Employing a comprehensive literature review approach, the study synthesizes current research findings, complemented by analyses of existing frameworks and case studies from healthcare organizations, offering practical insights. Interviews with cybersecurity experts and healthcare IT professionals provide nuanced perspectives on current security issues and emerging trends. Through qualitative and quantitative data analyses, the study generates recommendations aimed at enhancing patient data security. These include the adoption of new frameworks and innovative technologies to fortify healthcare data systems. By addressing these critical aspects, this research aims to significantly contribute to the advancement of a more secure and efficient healthcare ecosystem in today's digital landscape.

Water hyacinth (Eichhornia crassipes) is a potential accumulator of water pollutants in aquatic ecosystems, and its presence in water systems can affect water quality. This study used different field measurements and laboratory tests of Lake Water to determine the impact of water hyacinth phytoremediation capacity. A total of eight sampling stations used for the two lakes; Lake Koka and Lake Ziway. Sampling stations were selected from sites infested with water hyacinth (low, medium and high) and non-water hyacinth aquatic plants during wet and dry seasons to compare the effects of plants on water quality in the two lakes. All the sampled stations had various human interventions. The water samples were tested for the selected physico-chemical properties namely phosphate, nitrate, pH, electrical conductivity (EC), Biological oxygen demand (BOD5), temperature, and heavy metals (Chromium (Cr), Lead (Pb), Cadmium (Cd), Zinc (Zn), and Copper (Cu). These water quality variables were compared by means of ANOVA. Despite the COD of Lake Ziway, this study found no significant (p &gt; 0.05) variation in the concentrations of Cu, EC, pH and temperature between wet and dry seasons in either lake. Variations in Zn concentration and other physico-chemical parameters (EC, BOD, COD, nitrate, phosphate) between low, medium and high levels of water hyacinth were significant in both lakes (p&lt;0.05). Water hyacinth has shown significant phytoremediation nature during wet and dry seasons. The lowest average heavy metal, phosphate, and nitrate concentrations; and significant pH and temperature variations were observed in Lakes Koka and Lake Ziway, among water hyacinth and other grass-infested sites.

In the face of the burgeoning electricity demands and the imperative for sustainable development amidst rapid industrialization, this study introduces a dynamic and adaptable framework suitable for policy-makers and renewable energy experts working on integrating and optimizing renewable energy solutions. While using a case study representative model for Sub-Saharan Africa (SSA) to demonstrate the challenges and opportunities present in introducing optimization methods to bridge power supply deficits and the scalability of the model to other regions, this study presents an agile multi-criteria decision tool that pivots on four key development phases, advancing upon established methodologies and pioneering refined computational techniques, to select optimal configurations from a set of Policy Decision Making Metrics (PDM-DPS). Central to this investigation lies a rigorous comparative analysis of variants of three advanced algorithmic approaches: Swarm-Based Multi-objective Particle Swarm Optimization (MOPSO), Decomposition-Based Multi-objective Evolutionary Algorithm (MOEA/D), and Evolutionary-Based Strength Pareto Evolutionary Algorithm (SPEA2). These are applied to a grid-connected hybrid system, evaluated through a comprehensive 8760-hour simulation over a 20-year planning horizon. The evaluation is further enhanced by a set of refined Algorithm Performance Evaluation Metrics (AL-PEM) tailored to the specific constraints. The findings not only underscore the robustness and consistency of the SPEA2 variant over 15 runs of 200 generations each, which ranks first on the AL-PEM scale but also validate the strategic merit of combining multiple technologies and empowering policymakers with a versatile toolkit for informed decision-making.

Good health and well-being is one of the essential SDGs that ensure healthy lives and promote well-being for all ages and further entails providing substantial medical services to the public at low cost and with minimal adverse effects on the environment. Information and communication technologies (ICTs) have taken on an increasingly important function as significant facilitators of healthcare reform, with the goals of enhancing access to health services, the quality of treatment provided, and the overall productivity of the healthcare system. However, the integration of ever-increasing ICT technologies into the healthcare systems, also referred to as digital transformation, is not a straightforward process, but it comes with different types of challenges from integration level to application design level and security level. Although several studies have been proposed to address the integration of ICT technologies into healthcare systems, there is still a need for a comprehensive research study on the integration and design challenges, security and privacy challenges, application areas, and possible positive and negative impacts. Therefore, this paper contributes as the research literature study covering an important SDG, "Good health and well-being," and its digital transformation, along with summarising our research findings in a detailed and taxonomical way. To start with, firstly, we present a detailed comparison of existing studies on healthcare and well-being, mainly focusing on integrating ICT technologies in healthcare in terms of sustainable aspects, security and privacy challenges, design and integration challenges, E-health-related applications, and future directions. We also present an overview and the need for digital transformation in healthcare, discuss its significant components, highlight E-health's importance and benefits, explore its integration and design challenges, and categorise the security and privacy challenges. Next, we present an in-depth discussion on the role of Blockchain technology as today's leading technology in E-health, discussing Blockchain technology and its characteristics, highlighting its benefits, and describing the possible types of Blockchain-based E-health use cases. Furthermore, we discuss the positive and negative impact of ICT integration along with identifying open issues and challenges of integrating ICT technologies into the healthcare systems and discuss future research directions, which provide the strength for researchers to address the issues in future solutions.

In politics and society, organic farming is widely seen as the ideal way to address the many challenges facing agriculture and food security. In order to examine the extent to which this view is realistic, the impact of organic and conventional farming is compared on the basis of relevant criteria such as land requirements, greenhouse gas emissions, biodiversity, food quality, production and environmental costs, reduced meat consumption, the need for agricultural imports and the global expansion of arable land. Land is considered to be a central factor. Such a comprehensive analysis is necessary to assess the impact of different influencing factors and to provide important suggestions for targeted decision making. Although organic farming has a positive impact on land use in many ways, it quickly reaches its limits. The low yields and high production costs resulting from the limited choice of means of production make organic farming an unsuitable model for the future in a world with limited arable land, a high and growing demand for food, and low incomes for large sections of the population. It can, however, provide significant impetus and contribute important technological knowledge for the further development of agriculture as a whole to meet the complex objectives of sustainability, greenhouse gas mitigation, biodiversity and global food security by incorporating all available technologies. Based on this, a model for responsible, sustainable intensive agriculture is outlined and proposals for an eco-social framework to support this model are put forward.

The Global Hunger Index (GHI) is a vital tool for assessing and understanding the state of hunger and food security across the world. In this review article, we examine the GHI scores of various countries in the years 2000, 2008, 2015, and 2023. We aim to explore the changes in GHI scores over this period, identify trends, and discuss the implications for global food security. The GHI provides a comprehensive snapshot of the world's progress in reducing hunger, and this analysis sheds light on the successes and challenges faced by different countries.

A large amount of raw data collected by satellites is processed by the production chain to obtain a large amount of product data, of which the secure exchange and storage is of interest to researchers in the field of remote sensing information science. Authentic, secure data is a critical foundation for data analysis and decision-making. And traditional centralized cloud computing systems are vulnerable to attacks, and once the central server is successfully attacked, all data will be lost. Distributed Ledger Technology (DLT) is an innovative computer technology that can ensure information security, traceability and tamper-proof, and can be applied to the field of remote sensing. Although there are many advantages to using DLT in remote sensing applications, there are some obstacles and limitations to its application. Remote sensing data has the characteristics of large data volume, spatiotemporal nature, global and so on, and it is difficult to store and interconnect remote sensing data in the blockchain. To address these issues, this paper proposes a trustworthy and decentralized system using blockchain. The novelty of this paper is to propose a multi-level blockchain architecture in which the system collects remote sensing data and stores it in the Interplanetary File System (IPFS) network, after generating the IPFS hash, the network rehashes the value again and uploads it on the Ethereum chain for public query. Distributed data storage improves data security, supports the secure exchange of information, and improves the efficiency of data management.

Crop yield enhancement is crucial for ensuring food security and meeting the growing global demand for agricultural products. The development of innovative technologies, such as CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats), has provided new avenues for precise genetic modifications in crops. In this research article, we explore the application of CRISPR technology for crop yield improvement. We discuss the methodology, present recent results, and engage in a comprehensive discussion of the potential benefits, challenges, and future prospects of CRISPR-mediated crop yield enhancement.

Cyber-physical security is vital for protecting key computing infrastructure against cyber attacks. Individuals, corporations, and society can all suffer considerable digital asset losses due to cyber attacks, including Data loss, theft, financial loss, reputation harm, company interruption, infrastructure damage, ransomware attacks, and espionage. A cyber-physical attack harms both digital and physical assets. Cyber-physical system security is more challenging than software-level cyber security because it requires physical inspection and monitoring. This paper proposes an innovative and effective algorithm to strengthen Cyber-Physical Security (CPS) with minimal human intervention. It is a Human Activity Recognition (HAR)-based approach where a GoogleNet-BiLSTM network hybridization has been used to recognize suspicious activities in cyber-physical infrastructure perimeter. The proposed HAR-CPS algorithm classifies suspicious activities from real-time video surveillance with an average accuracy of 73.15%. It incorporates Machine Vision at the IoT Edge (Mez) technology to make the system latency tolerant. Dual-layer security has been ensured by operating the proposed algorithm and GoogleNet-BiLSTM hybrid network from a cloud server, which ensures the security of the proposed security system. The innovative optimization scheme makes it possible to strengthen cyber-physical security with $4.29 per month only.

The quickest and easiest way to avoid greenhouse gas (GHG) emissions is to purchase renewable electricity and offset the remaining emissions. However, the industrial sector’s electricity needs already exceed renewable electricity generation. Moreover, electricity accounts for only one third of the industry’s energy needs. Simultaneously, the advance of sectoral coupling and the decarbonisation of industrial processes, as well as the desire to rapidly decrease dependence on fossil fuels, are creating significant additional demand for renewable energy. Neither existing nor planned generation and transmission infrastructure will suffice to meet the expected short-term demand. Based on survey data from the German Industry Energy Efficiency Index, this article therefore examines the share of GHG savings that companies intend to achieve on- and off-site. Understanding how much additional generation and transmission capacity is needed by the industry to decarbonise and by when is crucial to identify and address the extent of excess demand. On average, companies plan to avoid 22 % of their 2019 emissions by 2025 and 27 % by 2030, primarily through on-site measures. In combination with the extrapolation of the entire industry’s needs for off-site capacity, the data calls for a rapid expansion of planning authority and green generation capacities.

Plant breeding is central to agriculture, and shifts in plant breeding practices (e.g., hybrid development) and selection goals (e.g., response to synthetic fertilizer) have catalyzed monumental and persistent changes in agricultural production systems of all scales with social, political, economic, and environmental repercussions. While plant breeders are largely trained in the sciences of biology, genetics, and statistics, we posit an ethical imperative to examine the degree of equity with which the benefits of new research and plant varieties are distributed. In the United States, the history of plant breeding parallels the colonial history of agriculture, which compels reflection by current plant breeders about their role in shaping our agricultural system. In this perspective essay, we examine longstanding ideas about equitable food systems through the lens of public plant breeding in the United States. We propose a framework for equitable public plant breeding with respect to both its process and outcomes, and we intend for the ideas presented herein to catalyze reflection, discussions, and actions as the plant breeding community seeks greater equity in the food and seed systems our work supports.

The ignorance of or lack of knowledge about cybersecurity aspects causes a critical problem regarding confidentiality and privacy. This security problem will continue to exist even if the user possesses less expertise in information security. The modern IT technologies are well developed, and almost everyone uses the features of IT technologies and services within the Internet. However, people are being affected due to cybersecurity threats. People can adhere to the recommended cybersecurity guidelines, rules, adopted standards, and cybercrime preventive measures. However, it is not possible to entirely avoid cybercrimes. Cybercrimes often lead to sufficient business losses and spread forbidden themes (hatred, terrorism, child porn, etc.). Therefore, to reduce the risk of cybercrimes, a web-based Blockchain-enabled cybersecurity awareness program (WBCA) process is introduced in this paper. The proposed web-based cybersecurity awareness program trains users to improve their security skills. The proposed program helps with understanding the common behaviors of cybercriminals and improves user knowledge of cybersecurity hygiene, best cybersecurity practices, modern cybersecurity vulnerabilities, and trends. Furthermore, the proposed WBCA uses the Blockchain technology to protect the model from the potential threats. The proposed model is validated and tested using real-world cybersecurity topics with real users and cybersecurity experts. We anticipate that the proposed program can be extended to other domains, such as national or corporate courses, to increase the cybersecurity awareness level of users.

Of course, now we know that quantum mechanics has been a fundamental structure of our world since our universe came into being. However, it has been only a century since the experimental and theoretical discovery of quantum mechanics and its extensions into many implications and applications. In particular, there are implications across many disciplines that most likely will affect education, health, security, etc. Examples are given of the need for starting education as early as possible in schools, the use of nano-robots to deliver drugs targeted to specific molecular sites, to developing new cryptographic systems to safeguard our privacy.

An oil and vinegar scheme is a signature scheme based on multivariate quadratic polynomials over finite fields. The system of polynomials contains $n$ variables, divided into two groups: $v$ vinegar variables and $o$ oil variables. The scheme is called balanced (OV) or unbalanced (UOV), depending on whether $v = 0$ or not, respectively. These schemes are very fast and require modest computational resources, which make them ideal for low-cost devices such as smart cards. However, the OV scheme has been already proven to be insecure and the UOV scheme has been proven to be very vulnerable for many parameter choices. In this paper, we propose a new multivariate public key signature whose central map consists of a set of polynomials obtained from the multiplication of block matrices. Our construction is motivated by the design of the Simple Matrix Scheme for Encryption and the UOV scheme. We show that it is secure against the Separation Method, which can be used to attack the UOV scheme, and against the Rank Attack, which is one of the deadliest attacks against multivariate public-key cryptosystems. Some theoretical results on matrices with polynomial entries are also given, to support the construction of the scheme.

IoT is a new communication paradigm that gains a very high importance in the past few years. This communication paradigm supports various heterogeneous applications in many fields and with the dramatic increase of the number of sensor devices, it becomes a demand. Designing IoT networks faces many challenges that include security, massive traffic, high availability, high reliability and energy constraints. Thus, new communication technologies and paradigms should be deployed for IoT networks to overcome these challenges and achieve high system performance. Distributed computing techniques (e.g. fog and MEC), software defined networking (SDN), network virtualization and blockchain are common recent paradigms that should be deployed for IoT networks, either combined or individually, to achieve the main requirements of the IoT networks at a high system performance. Fog computing is a form of edge computing that has been developed to provide the computing capabilities (e.g. storage and processing) at the edge of the access network. Employing Fog computing in IoT networks, as an intermediate layer between IoT devices and the remote cloud, becomes a demand to make use of the edge computing benefits. In this work, we provide a framework for the IoT system structure that employs an edge computing layer of Fog nodes controlled and managed by SDN network with the blockchain technology to achieve a high level of security for latency sensitive IoT applications. The proposed system employs SDN network with distributed controllers and distributed OpenFlow switches; these switches are enabled with limited computing and processing capabilities. Furthermore, a data offloading algorithm is developed to allocate different processing and computing tasks to the distributed OpenFlow switches with available resources. Moreover, a traffic model is proposed to model and analyze the traffic among different parts of the network. The proposed work achieves various benefits to the IoT network, such as the latency reduction, security improvement and high efficiency of resources utilization. The proposed algorithm is simulated and also the proposed system is experimentally tested over a developed testbed to validate the proposed structure. Experimental results show that the proposed system achieves higher efficiency in terms of latency, security and resource utilization.

The IoT Internet of Things being a promising technology of the future. It is expected to connect billions of devices. The increased communication number is expected to generate data mountain and the data security can be a threat. The devices in the architecture are fundamentally smaller in size and low powered. In general, classical encryption algorithms are computationally expensive and this due to their complexity and needs numerous rounds for encrypting, basically wasting the constrained energy of the gadgets. Less complex algorithm, though, may compromise the desired integrity. In this paper we apply a lightweight encryption algorithm named as Secure IoT (SIT) to a quantized speech image for Secure IoT. It is a 64-bit block cipher and requires 64-bit key to encrypt the data. This quantized speech image is constructed by first quantizing a speech signal and then splitting the quantized signal into frames. Then each of these frames is transposed for obtaining the different columns of this quantized speech image. Simulations result shows the algorithm provides substantial security in just five encryption rounds.

Evaluation of agronomic practices, genetic diversity and population structure of Moringa oleifera (Lam.) is crucial to its sustainable utilization to ensure food and nutritional security. Four agronomic practices of field preparation and soil analysis, regeneration, weeding and pruning, as well as harvesting, were adopted. Genetic diversity and population structure of 20 populations were evaluated using amplified fragment length polymorphism (AFLP) primer pairs (E-ACC/M-CAC and E-ACA/M-CAG). The effects of agronomic practices on leaf quantity production were evaluated using standard procedures. The physico-chemical and morphological data were analyzed using descriptive statistics, while genetic diversity, population structure, dendrogram reconstruction, and Principal Component Analysis (PCA) were analyzed from the AFLP genetic data. Significant effects (P ≤ 0.05) of agronomic practices on the quantity of leaf production were recorded across the accessions. The two primer pairs generated a total of 80 alleles with a mean major allele frequency of 0.0250. Gene diversity and polymorphic information content (PIC) values were high with a mean of 0.98 and 0.974, respectively. The Gst value of 0.0490 indicated that 5 % of the total genetic divergence was among the population while 95 % within the population. Dendrogram reconstruction with genetic distance ranging from 0.87 to 0.96 segregated the accessions into eleven clusters while PCA generated six cluster groups. Field preparation and physico-chemical soil properties, regeneration, weeding and pruning, and stand development, as well as harvesting, influenced the leaf yield and genetic diversity observed in this study. The genetic data revealed that some accessions were clustered along eco-geographical lines while others grouped disparately. Identified potential parent genotypes with valuable and desirable genetic traits can be exploited for commercial, breeding and conservation purposes to ensure sustainable utilization of the species in Nigeria.

Initially introduced almost thirty years ago for the express purpose of providing electronic warfare systems the capabilities to detect, characterize, and identify radar emitters, Specific Emitter Identification (SEI) has recently received a lot of attention within the research community as a physical layer technique for securing Internet of Things (IoT) deployments. This attention is due in large part to SEI’s demonstrated success in passively and uniquely identifying wireless emitters using traditional machine learning and the success of Deep Learning (DL) within the natural language processing and computer vision areas. SEI exploits distinct and unintentional features present within an emitter’s transmitted signals. The existence of these distinctive and unintentional features is attributed to slight manufacturing and assembly variations that exist within and between the components, sub-systems, and systems that comprise an emitter’s Radio Frequency (RF) front end. Although sufficient to facilitate SEI, these features do not hinder normal operations such as detection, channel estimation, timing, and demodulation. However, despite the plethora of SEI publications, it has remained largely a focus of academic endeavors that primarily focus on proof-of-concept demonstration and little to no use in operational networks for various reasons. The focus of this survey is a review of SEI publications from the perspective of its use as a practical, effective, and usable IoT security mechanism, thus we use IoT requirements and constraints (e.g., wireless standard, nature of their deployment) as a lens through which each reviewed paper is analyzed. Previous surveys have not taken such an approach and have only used IoT as motivation, a setting, or a context. In this survey, we consider operating conditions, SEI threats, SEI at scale, publicly available data sets, and SEI considerations that are dictated by the fact that it is to be employed by IoT devices or IoT infrastructure.

A cross-sectional study was applied to investigate the influence of food systems and food environments on food choices and nutrition transition of households in Limpopo province, South Africa. A sample of 429 households were systematically selected using a paper selection draw from three districts. Food systems, food environments, food choices, and nutritional measurements of the households and informants were assessed, using a validated questionnaire. Most of the household informants responsible for food procurement were females (80.4%). There was a significant association (p < 0.001) between proximity to food stores and dietary diversity of the households. Staple foods were available in almost all surveyed households (95.6%). More than half of the households (59.8%) had home gardens in their yards. Almost half of the households (48.4%) had a low Dietary Diversity Score. The study revealed that 46.0% of households were food secure. Over a third (36.2%) of households’ informants were obese and 32.5% were diabetic. The mean total blood cholesterol was 3.69 ± 0.74 mmol/L. A high percentage of both females (89.6%) and males (91.5%) had normal haemoglobin levels. Most of the informants had normal systolic blood pressure levels (63%), with just over half who had high diastolic levels (57%). The 25 coping strategies were applied during food shortages periods. Even though the food environments provided both obesogenic and protective foods, the consumption of unhealthy foods was high.

This study examines the balancing between urban transportation security and supply chain efficiency amid global disruptions like the COVID-19 pandemic, attacks on maritime lanes, and geopolitical conflicts. The authors combine bibliometric network analysis and natural language processing (NLP) to review scholarly literature from 2017 to 2023. This approach identifies and visualizes evolving thematic trends. Findings reveal a shift towards integrating advanced technologies such as blockchain, AI, and IoT to enhance security without compromising efficiency. This study highlights the significance of integrating urban planning principles and sustainable practices to enhance transportation security and supply chain efficiency within urban environments. Actionable insights for policymakers and supply chain managers emphasize the adoption of integrated, technology-driven security solutions to foster resilient and sustainable supply chains. This research contributes to academic discourse by refining the understanding of evolving priorities in transportation security and supply chain management, offering both theoretical and practical implications for secure and efficient global supply chains.

The Industrial Internet of Things (IIoT) is bringing evolution with remote monitoring, intelligent analytics, and control of industrial processes. A reference architecture provides the general layout information for the flexible integration of IIoT systems; however, as the industrial world is currently in its initial stage of adopting the full-stack development solutions with IIoT, some challenges need to be addressed. To cope with the rising challenges and provide the blueprint guidelines to develop and implement IIoT in real-time, researchers around the globe have proposed IIoT architectures based on different architectural layers and emerging technologies. In this paper, we first review and compare some widely accepted IIoT reference architectures and present a state-of-the-art review of conceptual and experimental IIoT architectures in literature. We highlight scalability, interoperability, security, privacy, reliability, and low latency as the main IIoT architectural requirements and compare how the current architectures address these challenges. We also highlight the role of emerging technologies in current IIoT architectures to address these requirements and present the literature gap for future research work to address the challenges.

The rapid development of three-dimensional (3D) acquisition technology based on 3D sensors provides a large volume of data, which is often represented in the form of point clouds. Point cloud representation can preserve the original geometric information along with associated attributes in a 3D space. Therefore, it has been widely adopted in many scene-understanding-related applications such as virtual reality (VR) and autonomous driving. However, the massive amount of point cloud data aggregated from distributed 3D sensors also poses challenges for secure data collection, management, storage, and sharing. Thanks to the characteristics of decentralization and security nature, Blockchain has a great potential to improve point cloud services and enhance security and privacy preservation. Inspired by the rationales behind Software Defined Network (SDN) technology, this paper envisions SAUSA, a blockchain-based authentication network that is capable of recording, tracking, and auditing the access, usage, and storage of 3D point cloud data sets in their life-cycle in a decentralized manner. SAUSA adopts an SDN-enabled point cloud service architecture which allows for efficient data processing and delivery to satisfy diverse Quality-of-Service (QoS) requirements. A blockchain-based authentication framework is proposed to ensure security and privacy preservation in point cloud data acquisition, storage, and analytics. Leveraging smart contracts for digitizing access control policies and point cloud data on the blockchain, data owners have full control of their 3D sensors and point clouds. In addition, anyone can verify the authenticity and integrity of point clouds in use without relying on a third party. Moreover, SAUSA integrates a decentralized storage platform to store encrypted point clouds while recording references of raw data on the distributed ledger. Such a hybrid on-chain and off-chain storage strategy not only improves robustness and availability but also ensures privacy preservation for sensitive information in point cloud applications. A proof-of-concept prototype is implemented and tested on a physical network. The experimental evaluation validates the feasibility and effectiveness of the proposed SAUSA solution.

Holographic subsurface radar (HSR) is currently not in widespread usage. This is due to an historical perspective in the ground penetrating radar (GPR) community that the high attenuation of electromagnetic waves in most media of interest, and the inability to apply time-varying gain to the continuous wave (CW) HSR signal precludes sufficient effective penetration depth. While it is true that the fundamental physics of HSR, with its use of a CW signal, does not allow amplification of later (i.e. deeper) arrivals in lossy media (as is possible with impulse subsurface radar — ISR), HSR has distinct some distinctive advantages. The most important of these is the ability to do shallow subsurface imaging with a resolution that is not possible with ISR. In addition, the design of an HSR system is simpler than for ISR due to the relatively low-tech transmitting and receiving antennae. This paper provides a review of the main principles of HSR through an optical analogy and describes possible algorithms for radar hologram reconstruction. We also present a review of the history of development of systems and applications for HSR of the “RASCAN” type which is possibly the only holographic subsurface radar that is produced in lots. Among the subsurface imaging and remote sensing applications considered are humanitarian demining, construction inspection, surveys of historic architecture and artworks, nondestructive testing of dielectric aerospace materials, security applications, paleontology, detection of wood-boring insect damage, and others. Each application is illustrated with relevant data acquired in laboratory and/or field experiments.

Holographic subsurface radar (HSR) is currently not in widespread usage. This is due to an historical perspective in the ground penetrating radar (GPR) community that the high attenuation of electromagnetic waves in most media of interest, and the inability to apply time-varying gain to the continuous wave (CW) HSR signal precludes sufficient effective penetration depth. While it is true that the fundamental physics of HSR, with its use of a CW signal, does not allow amplification of later (i.e. deeper) arrivals in lossy media (as is possible with impulse subsurface radar — ISR), HSR has distinct some distinctive advantages. The most important of these is the ability to do shallow subsurface imaging with a resolution that is not possible with ISR. In addition, the design of an HSR system is simpler than for ISR due to the relatively low-tech transmitting and receiving antennae. This paper provides a review of the main principles of HSR through an optical analogy and describes possible algorithms for radar hologram reconstruction. We also present a review of the history of development of systems and applications for HSR of the “RASCAN” type which is possibly the only holographic subsurface radar that is produced in lots. Among the subsurface imaging and remote sensing applications considered are humanitarian demining, construction inspection, surveys of historic architecture and artworks, nondestructive testing of dielectric aerospace materials, security applications, paleontology, detection of wood-boring insect damage, and others. Each application is illustrated with relevant data acquired in laboratory and/or field experiments.

Physical Unclonable Functions (PUFs) based on the retention times of the cells of a Dynamic Random Access Memory (DRAM) can be utilised for the implementation of cost-efficient and lightweight cryptographic protocols. However, as recent work has demonstrated, the times needed in order to generate their responses may prohibit their widespread usage. In order to address this issue, the Row Hammer PUF has been proposed by Schaller et al. [1], which leverages the row hammer effect in DRAM modules to reduce the retention times of their cells and, therefore, significantly speed up the generation times for the responses of PUFs based on these retention times. In this work, we extend the work of Schaller et al. by presenting a run-time accessible implementation of this PUF and further reducing the time required for the generation of its responses. Additionally, we also provide a more thorough investigation of the effects of temperature variations on the the Row Hammer PUF and briefly discuss potential statistical relationships between the cells used to implement it. As our results prove, the Row Hammer PUF could potentially provide an adequate level of security for Commercial Off-The-Shelf (COTS) devices, if its dependency on temperature is mitigated, and, may therefore, be commercially adopted in the near future.

Connected and Autonomous Vehicle (CAV) combines technologies of autonomous vehicle (AV) and connected vehicles (CV) to develop quicker, more reliable and safer traffic. Artificial Intelligence (AI) based CAV solutions play significant roles in sustainable city. The convergence imposes stringent security requirements for CAV safety and reliability. In practice, vehicles are developed with increased automation and connectivity. Increased automation increases the reliance on the sensor-based technologies and decreases the reliance on driver; increased connectivity increases the exposures of vehicles vulnerability and increases the risk for an adversary to implement a cyber-attack. Much work has been dedicated to identifying the security vulnerabilities and recommending mitigation techniques associated with different sensors, controllers, and connection mechanisms, respectively. However, there is an absence of comprehensive and in-depth studies to identify how the cyber-attacks exploit the vehicles vulnerabilities to negatively impact the performance and operations of CAV. In this survey, we set out to thoroughly review the security issues introduced by AV and CV technologies, analyze how the cyber-attacks impact the performance of CAV, and summarize the solutions correspondingly. The impact of cyber-attacks on the performance of CAV is elaborated from both viewpoints of intra-vehicle system and inter-vehicle system. We pointed out that securing the perception and operations of CAV would be the top requirement to enable CAV to be applied safely and reliably in practice. Also, we suggested to utilize cloud and new AI methods to defend against smart cyber-attacks on CAV.

Ethiopian agriculture is not only affected by precipitation declines (meteorological droughts) but also soil dryness caused by temperature increases and associated long-term hydrological changes. Meteorological drought indicators (e.g., SPI), do not fully capture the water deficits in agricultural systems (i.e., agricultural droughts). An Ethiopia-wide assessment of meteorological and agricultural drought trends was carried out to characterize century-scale (1902 – 2016) changes in droughts. SPI and SPEI calculated using two-month accumulation and the Palmer Z-index were used for assessing intra-season drought trends. SPI and SPEI at six-month accumulations and PDSI were used to define full season droughts. Detrended variance corrected Mann-Kendall test was used for trend analysis during Bega (dry), Belg (short-rainy) and Meher (long-rainy) seasons. The SPEI-2 and PDSI were most aggressive in characterizing intra-season and seasonal-drought trends. There is on average 1% - 6% annual increase in dryness with the lower estimate based on precipitation declines and the upper end accounting for seasonal soil moisture dynamics. The area between 37.5° E – 42.5° E denotes a climate hot-spot. Precipitation declines in Belg along the Ethiopia-South-Sudan/Sudan border during Belg and along Eretria-Ethiopia border during Meher have the potential to exacerbate transboundary water conflicts and further threaten the food security of the region.

To safeguard against meat supply shortages during pandemics or other catastrophes, this study analyzed the potential to provide the average household’s entire protein consumption using either soybean production or distributed meat production at the household level in the U.S. with: 1) pasture-fed rabbits, 2) pellet and hay-fed rabbits, or 3) pellet-fed chickens. Only using the average backyard resources, soybean cultivation can provide 80%-160% of household protein and 0%-50% of a household’s protein needs can be provided by pasture-fed rabbits using only the yard grass as feed. If external supplementation of feed is available, raising 52 chickens while also harvesting the concomitant eggs or alternately 107 grain-fed rabbits can meet 100% of an average household’s protein requirements. These results show that resilience to future pandemics and challenges associated with growing meat demands can be incrementally addressed through backyard distributed protein production. Backyard production of chicken meat, eggs, and rabbit meat reduces environmental costs of protein due to savings in production, transportation, and refrigeration of meat products and even more so with soybeans. Generally, distributed production of protein was found to be economically competitive with centralized production of meat if distributed labor costs were ignored.

Rationale: Genetically modified (GM) foods have the potential to reduce food insecurity and address economic and environmental issues. Despite these benefits, GM foods continue to face significant criticism and there is limited information on public awareness and understanding of their nutritional and environmental health benefits in Nigeria. This study aims to fill this gap by investigating public knowledge and perceptions of GM foods in Victoria Island, Lagos. Methods: A convenience sampling method was used to recruit 369 respondents from Victoria Island, Lagos. Data were gathered using a structured questionnaire. The target population comprised employed adults either residing or working on Victoria Island. Statistical analyses were conducted to examine the relationship between sociodemographic factors and awareness of GM foods. Results: The study found that a majority of respondents (62.9%, n=232) were knowledgeable about GM foods and their associated issues. However, many believed that their community was not well-informed on the topic. Awareness of GM foods was significantly associated with sociodemographic factors such as marital status and education (P<0.01). Most respondents were well-informed about the environmental and health benefits of GM foods, with 61.8% believing that GM food production could sustainably reduce reliance on chemical pesticides, fertilizers, and other energy inputs, thus mitigating their ecological impacts. Additionally, most respondents did not feel that purchasing or consuming GM foods conflicted with their beliefs or would affect their food choices. Conclusion: The study concludes that while individual awareness of GM foods is relatively high, there is a perception that community awareness is low. Sociodemographic factors play a significant role in shaping public awareness and perceptions of GM foods. Recommendations: This includes government should actively educate the public on the ecological and health benefits of GM foods and address any safety concerns; Implement strict border controls and food labeling for GM products to protect consumer rights and preferences for organic foods, provide sufficient technical and financial assistance to farmers who participate in organic seed programs to enhance national food security. Significant Statement: This study highlights the importance of public education on GM foods and underscores the need for government intervention to ensure informed consumer choices and support for sustainable agricultural practices.

Given the landscape of intricate and constantly evolving cyber threats, organizations demand refined strategies to deploy a Security Information and Event Management to support the management of a Cyber Security Operations Center. The dynamic nature of cyber threats complicates the efficient allocation of the location of network intrusion detection sensors, a critical component of a robust cybersecurity framework. Our research introduces an approach that integrates the precision of biomimetic optimization algorithms with the adaptability of Deep Q–Learning. By employing different biomimetic algorithms enhanced with deep learning, we aim to refine the deployment of sensors in network infrastructures, balancing the network security imperative against deployment costs. The results of computational tests demonstrate that the improved iterations leveraging Deep Q–Learning have outperformed their native counterparts. These findings underscore the importance of reinforcement learning, specifically through Deep Q–Learning, as a powerful tool to enhance the effectiveness of metaheuristics in addressing optimization challenges.

The rapid evolution of technology has given rise to a connected world, where billions of devices interact seamlessly, forming what is known as the Internet of Things (IoT). While IoT offers incredible convenience and efficiency, it presents a significant challenge in cybersecurity and is characterized by various power, capacity, and computational process limitations. Machine learning techniques are employed within Intrusion Detection Systems (IDS) to enhance their capabilities in identifying and responding to security threats. The key features selected to improve IDS efficiency and reduce dataset size, thereby decreasing the time required for attack detection, are drawn from the extensive network dataset. This paper introduces an enhanced feature selection method designed to reduce the computational overhead on IoT resources while simultaneously strengthening intrusion detection capabilities within the IoT environment. Experimental results based on the InSDN dataset demonstrate that our proposed methodology achieves the highest accuracy with the fewest number of features and low computational cost. Specifically, we attain a 99.99% accuracy with 11 features and a computational time of 0.8599 seconds.

Climate change, recognized as a global crisis, is not only altering our environment but also significantly impacting human health. Particularly, its influence on non-communicable diseases (NCDs), a leading cause of global mortality, is becoming increasingly evident yet underexplored. This review aims to synthesize current research on the impact of climate change on NCDs, addressing a critical gap in our understanding of how environmental changes affect human health. We examine the complex interplay between climate change and NCDs, drawing insights from recent studies that highlight the adverse effects of climate variables on chronic diseases, such as cardiovascular and kidney diseases, and the role of food and nutrition security in this nexus. Furthermore, the review explores the disproportionate impact on vulnerable regions and populations, particularly in Pacific Island countries and territories, underscoring the urgent need for context-specific solutions and a cross-sectoral approach. By integrating findings from various disciplines, this review aims to inform policy and public health interventions, highlighting the necessity of collaborative efforts to mitigate the burgeoning burden of NCDs in a rapidly changing climate.

The world has changed. New technologies, new trends, new protocols, new efficient algorithms, and systems have been used widely by civilized countries to have better and more convenient living. In this research, there have been introduced many new terms, technologies, and mechanisms. Moreover, threats, attacks, and vulnerabilities have been studied and a novel scenario has been proposed in order to overcome all these violations that have been presented in this paper. The scenario is based on a security model that has been proposed for critical sectors, such as hospitals, industries, etc., which need efficient solutions to go one step further and improve the secure and efficient living and treatment of people. The aim of this research has been to understand through research the IoT security issues and propose the appropriate solutions based on the most suitable security algorithms. The results, which have been based on the complexity, the throughput, the power consumption, the strength, and the memory usage of the algorithms studied, have been hopeful and helpful for future research and experimentation.

This study aims to investigate how the adoption of an online to offline (O2O) transition strategy impacts the sales volume of Kampoeng Merdeka Clothing. The O2O strategy includes various components, such as establishing O2O platforms, delivering personalized services, ensuring secure transactions, and engaging in offline business activities. The research employs a quantitative approach, focusing on consumers who have made clothing purchases from Kampoeng Merdeka Clothing in Macassar. The sample size comprises 83 respondents, deliberately selected using the Slovin approach. The data analysis and methodology involve the application of Partial Least Squares (PLS) structural equation modeling to assess both the external and internal models. The findings of this study emphasize the significant and positive influence of the variables "Build O2O Network Platform," "Provide Personalized Experience," "Safeguard Transactions Security," and "Offline Business" on driving the sales growth of Kampoeng Merdeka Clothing. These results indicate that the O2O transition strategy has a substantial impact on the brand's sales performance, with the establishment of O2O platforms and personalized services playing crucial roles. Additionally, ensuring secure transactions and engaging in offline business activities further contribute to the overall success of Kampoeng Merdeka Clothing in the market. This research sheds light on the effectiveness of the O2O approach in boosting sales for clothing brands and underscores the importance of integrating online and offline elements to maximize business outcomes.

We investigate if anyone is being left behind in accessing safely managed drinking water (SM) in achieving the 2030 agenda. We use 23 countries grouped globally as critically insecure water (CIWC). The results indicate none of the CIWC had over 50% of the population accessing SM, N. America and Europe had highest percentages while Sub Saharan Africa had the least. People left behind are found in rural areas, in countries vulnerable to climate change because of poor governance, low-income, and women’s low education. Institutional quality, equity and equality should be improved in using resources critical to leaving no one behind.

Technical sectors are an inseparable and elementary part of a critical infrastructure (CI) complex system. The services they provide are essential to the functioning of all the dependent sectors of CI on whose services society depends, especially in areas with high levels of urbanisation. The starting point for effective CI elements protection of is permanent assessing and strengthening their resilience to the negative effects of internal and external threats. Current perceptions of resilience focus primarily on repressive components responsive to incident (i.e., robustness, recoverability, and adaptability), while little attention is paid to preventative components. Therefore, the benefit of the article is to define resistance which could be seen as the CI element ability or characteristic to prevent the occurrence of incidents. Based on that, the article defines 1) the individual factors (variables and parameters) determining the CI resistance and 2) the methodological procedure for infrastructure elements resistance assessment in order to identify weak points and subsequently strengthen them. The essence of the article is defining the starting points for extending the CIERA method by a component strengthening the critical infrastructure resilience in the prevention phase. A practical example of resistance assessment for a selected critical energy infrastructure element is presented at the end of the article.

To quantitatively estimate the risk of power system operation under extreme rainfall, a multi-scenario stochastic risk assessment method is proposed. First, a scenario generation scheme considering waterlogged faults of power facilities is constructed based on the storm water management model (SWMM) and the extreme learning machine method. These scenarios will be merged to several typical scenario sets for further processing. The outage of power facilities will induce power flow transfer which may consequently lead to transmission lines’ thermal limit violation. Semi-invariant and Gram-Charlier level expansion methods are adopted to analytically depict the probability density function and cumulative probability function of each line’s power flow. The optimal solution is performed by a particle swarm algorithm to obtain proper load curtailment at each bus, and consequently the violation probability of line thermal violations can be controlled within an allowable range. The volume of load curtailment as well as their importance are considered to quantitatively access the risk of power supply security under extreme precipitation scenarios. The effectiveness of the proposed method is verified in case studies based on the IEEE 24-bus system.

Data security is a fundamental aspect to be considered in Internet of Things (IoT) information gathering systems, as IoT is a network of interconnected devices that collect and share real-time data, becoming increasingly prevalent in our lives. However, data security in IoT systems presents unique challenges due to the large number of devices and access points involved. This study aims to conduct a literature review on IoT security to analyze the performance of security mechanisms on current development platforms, specifically on a Raspberry Pi 3. Some functions from the OpenSSL library were used, including popular hash functions and cipher algorithms. Additionally, a bash code was developed to obtain the time spent in seconds and the memory consumption in kilobytes. In addition to time and memory calculations, statistical values such as variance and standard deviation were also obtained and compared with results obtained on a personal computer. The tests conducted in this study demonstrated that it is possible to implement these algorithms on platforms with more limited resources, with AES and RSA algorithms being the most suitable for IoT scenarios.

We are already more than year away from the pandemic period, followed by a year within a global economic crisis and a war in Ukraine, with the marks and the changes caused in all parameters of life becoming clear now including food choice motives of citizens worldwide. In this study we investigate the changes in food choice motives caused by the pandemic to college students in Greece in the 10 key food motives namely health, convenience, sensory, appeal, nutritional quality, moral concerns, weight control, mood and stress, familiarity, price, and shopping frequency and behavior. A self-response questionnaire survey was carried out in January to February 2023 on a sample of 1017 college students’ participants through the Google platform. Basic statistical tools, combined with cross and Chi-square tests were used in order to analyze the collected data. The results show that students exhibit quiet and very important preferences on health, convenience, weight control, and mood and stress. Food choices related to sensory appeal, nutritional quality, and familiarity is of less importance for the students, similarly to ethical concerns expect the environmental impact of the food which is high to their concern. The motive which continues to have the highest concern for students before and after the pandemic is price looking for value for money food (88.8%), not to be expensive (80.7%), and be cheap (78.7%). The shopping frequency and behavior motives, which were changed during the pandemic, have now returned to the motives of the pre pandemic period, with purchase of foods from supermarket (29%), local grocery (37.6%), and only 12.3% via online, and 20.4% by delivery, weekly or every two weeks. They prefer to cook at home full meals is now very high reaching 74.4%, avoiding eating at a restaurant or fast food (only 27% positives answers). Our findings indicate that students have already returned to their food choice motives of the period before COVID-19 except the home cooking food which is now high in their preference.

Entomopathogenic fungi perform important functions in the ecosystem as natural antagonists of insects, which can be used in agriculture. Interestingly, recent studies showed a significant promotion of tested plants growth in the presence of fungi. We hypothesize that some of various compounds produced by entomopathogenic fungi can positively affect plant development. To test this hypothesis, fungal extracts of entomopathogenic fungus Beauveria bassiana were prepared at different conditions of temperature and pH. In addition to determination of the ammonium nitrogen content, the composition of extracts was analyzed by elemental ICP-OES. Then, their effect on the wheat germ growth was studied using various extract concentrations. After experiments, tested plants were measured, weighed, and the chlorophyll content was determined. Finally, the impact of extracts on the selected G+ and G- bacteria growth was examined to exclude the possibility of interference with soil microorganisms. The highest length of the wheat shoot was obtained for the use of 10-times diluted extract (10%) at pH 10 obtained at 20°C. In contrast, addition of 10% extract (pH 10) obtained at 75°C resulted in the shortest shoot. Generally, the extracts obtained at 75°C showed phytotoxic properties leading to lower values of shoot length and fresh weight in comparison to the control group. Our preliminary results are the first confirming the potential of fungal water extracts as factors promoting plant growth. Further detailed study should be carried out to confirm the effects in real environment conditions. Also, the consistency of the plant growth stimulation across different entomopathogenic fungi, and agriculturally used plant species should be tested.

Food security is a matter of global concern, as the supply of food is one of the basic needs, ensuring the survival of the species. The trend of globalization and development of the global economy has shifted the responsible, local consumption patterns towards an increased homogeneity of diets, with food products being disconnected from their source, leading to two major results: (1) increased global consumption, driven by the extensive availability of affordable seasonal foods throughout the year and (2) increased uncertainty in the supply chain – susceptible to disruptions, causing food insecurity. To determine what the nutritional model is in the case of the present study – Romania – we developed a questionnaire of 32 questions and distributed it to 1,053 respondents from Romania. The survey was conducted during 2021 and 2022, both in urban and rural areas with the aim of investigating the consumption pattern of the population. The analysis of the questionnaire data reveals overconsumption of animal products, starchy vegetables and bread and pastry products. This nutritional pattern with a high intake in animal protein, correlated with a lack of diversification, is extremely unsustainable, having a negative impact on human health and environmental health.behaviour towards a careful approach to food, environment and personal health, aims to identify consumption patterns that have the potential to increase the sustainability of the food system and a positive correlation with food security. Adopting sustainable dietary patters, based on short supply chains and mindful consumption, has great potential in restoring food security and resilience to adversity.

Food security is a matter of global interest, as the provision of food resources is the primary determinant of human existence. Food is one of the basic needs, ensuring the survival of the species. The trend of globalization and development of the global economy has shifted the responsible local consumption patterns to an increased homogeneity of diets, food products being disconnected from their source. This disconnection led to two major results: (1) increased global consumption, with seasonal foods now available throughout the year, and a decrease in food prices on the global market, and (2) increased uncertainty in the supply chain, susceptible to disruptions, as was the case during the Covid-19 pandemic. The present study, based on the research and analysis of third-party data on food security, sustainable diets, consumption patterns and recommended actions to change the current unsustainable consumer behaviour towards a careful approach to food, environment and personal health, aims to identify consumption patterns that have the potential to increase the sustainability of the food system and a positive correlation with food security. Adopting sustainable dietary patters, based on short supply chains and mindful consumption, has great potential in restoring food security and resilience to adversity.

The emergence of existing and novel vector-borne disease pathogens is highly unpredictable because there are so many possible causal factors of sociological, ecological, biological, behavioral and political origin. Traditional data-driven forecasting tools have limited use in circumstances featuring low-probability crises for which trend data is unreliable and non-predictive. Commercial and security sectors have been quick to adopt various forms of wargames to address this gap and provide intelligent insights on possible outcomes in the short, mid and long term future. The lack of commitment and action against vector-borne diseases by governments and local authorities requires a new approach that presents risk in terms of potential actions, possible outcomes and resulting consequences.

Through the Internet of Things (IoT) the internet scope is established by the aid of physical objects integration to classify themselves to mutual things. A physical object can be created by this inventive perception to signify itself in the digital world. Regarding the physical objects that are related to the internet, it is worth to mention that considering numerous theories and upcoming predictions, they mostly require protected structures, moreover, they are at risk of several attacks. IoTs are endangered by particular routing disobedience called physical layer attack owing to their distributed features. The physical layer attack as a security warning makes possible for the invader to abuse the resources and bandwidth of the network through overloading the network via unimportant packets. This protocol is called LSFA-IoT consisting of two key sections of the physical layer detection system and misbehavior detection system. The first section is utilized in stabilizing the status of the network. The second section is in charge of discovering the misbehavior sources within the IoT network through , the Average Packet Transmission RREQ. By detecting a malicious node, the status of the node is checked by LSFA-IoT prior to sending a data packet and in case detecting the node as malicious, no packet is sent to that node and that node is added to the detention list. Here, the technique is assessed through wide simulations performed within the NS-3 environment. Based on the results of the simulation, it is indicated that the IoT network behaviour metrics are enhanced based on the detection rate, false-negative rate, false-positive rate, and packet delivery rate.

Immense challenges arise in the Quality Assurance area due to contemporary development in Internet of Things (IoT) technology. Current issues are mainly related to test coverage, test diversity, IoT Stability, Use of Cellular Networks in IoTs, IoT Devices updates, Security, Data Integration, and interoperability. In this paper, we present all those issues with suggestions for tackling those issues.

In nowadays conditions, insurance provides the opportunity for market system of economic management to work in any state. To provide economic security of the person it is needed to create a mechanism of protection against internal and external threats in modern Russia. That’s why the role of citizens insurance policy is increasing as the most effective risk management institute and achieving safety of health and private property of citizens. The goal of this research is to study Russian citizens’ attitudes towards insurance policy and investment using the conception of personal economic security. The preparatory study stage was focused on theoretical understanding of economic security problems taking insurance field as an example. Empirical research consisted of four stages. There were 1793 people taking part in this research. Results of this study can be proposed in the program of improving the functioning of the insurance market in the Russian Federation in The framework of the strategy of development of the insurance market - 2020. The obtained results can be used in Politics and Economics in the development of a set of measures related to lawmaking, control of financial institutions, promotion of financial literacy of the population, preparation of courses for universities and trainings for participants of the insurance market. The typologies of policyholders which were given can be the basis to create insurance programs for the citizens.

Integrated Water Resources Management (IWRM) is one of the system thinking approaches emerged in the 1990s. Since then it has been applied in various countries and contexts. However, the implementation of the IWRM is contested. There are paucity of literature and guidelines as to how the concept can be operationalized. In Ethiopia, there is no evidence that IWRM is successfully instituted. Particularly, IWRM has never been implemented in the Awash River Basin. The study generated data from household and institutional surveys, in-depth interviews, focused group discussions, workshops, and secondary sources. Multiple sources of data were triangulated and thematically summarized. We found that pragmatic water resources management through system approach helps to recognize river basin as a bigger system in which the natural and human systems function. This resolves the problem of fragmentations among among various actors, sectors, interest and priorities. That it facilitates the coordination of various subsystems. The operationalization of IWRM as a system to secure water resources require the establishment and/or strengthening of the interactions of various systems, subsystems, and the elements within the entire basin system. Finally, enabling institutional environments should be considered as a medium of realizing IWRM.

Rice provides ~20% of human dietary energy and, for many people, a similar share of their protein. Rice cultivation, however, produces significant greenhouse gas (GHG) emissions, comparable to those from the aviation sector. The main GHG from rice production is methane, mostly a result of conventional rice cultivation (CRC) keeping rice fields continuously flooded during the crop cycle. There is extensive evidence that alternate wetting and drying (AWD) of rice fields substantially reduces methane emissions. AWD is one component of the System of Rice Intensification (SRI), an agroecological approach to the management of plants, water, soil and nutrients practiced by millions of farmers in both lowland irrigated rice and upland rainfed cultivation. Thirteen countries have included SRI in their Nationally Determined Contributions to GHG reduction or climate change mitigation. This article reviews 16 field studies of the net reduction in GHG emissions from the adoption of AWD, eight from the adoption of SRI, and two that compared SRI and AWD. Where available, the review includes data on yield and therefore on carbon dioxide-equivalent GHG emissions per kilogram of rice produced. The evidence indicates that AWD and SRI offer a similar and substantial reduction (~35–41%) in GHG emissions per hectare compared with conventional rice cultivation. However, SRI offers ~66% greater yield than CRC, and therefore greater reduction in emissions per kilogram of rice, ~54% more than AWD. The limited data directly comparing SRI and AWD support this finding. SRI also appears to have greater potential to sequester carbon in the soil. SRI lowers rice farmers’ costs of production, adds to their income and can make climate-friendly methods more attractive. Both AWD and SRI are greatly preferable to current conventional practices, but SRI offers opportunities to contribute to food security while directly addressing the drivers of climate change.

The COVID-19 pandemic affects not only physical health but also deteriorates mental health resulting in sleep problems, depression, and traumatic stress. Our research investigates the level of posttraumatic stress, perceived social support, opinions on positive and negative consequences of the pandemic, sense of security, and sense of meaning among nurses in the face of new and not fully understood global epidemiological phenomena. For this purpose, computer-assisted web interviewing methods were conducted between May 1 and May 15, 2020. Participating nurses completed the following research tools: The Impact Event Scale-Revised (IES-R), The Multidimensional Scale of Perceived Social Support (MSPSS), The Changes in Outlook Questionnaire (CIOQ), The Safety Experience Questionnaire (SEQ) and The Meaning in Life Questionnaire (MLQ). Three hundred and twenty-five nurses working throughout Poland joined the study of an average age of 39.18 ± 11.16 years. The average overall IES-R score in the study group was 1.78 ± 0.65. Among the dimensions of traumatic stress, the highest score was obtained in the dimension Avoidance 1.86 ± 0.73, then in the dimensions Hyperarousal 1.8 ± 0.78 and Intrusion 1.74 ± 0.83. Amongst studied nurses, the highest support rates were provided by significant others (22.58 ± 5.22), then from friends (21.91 ± 5) and family (21.45 ± 4.4). Among the surveyed nurses, higher average scores were noted in the subscale measuring positive psychological changes (18.56 ± 4.04). In contrast, a higher average level of assessment was noted on the Reflection on the safety dimension (4.21 ± 0.49). The mean MLQ score was 5.33 ± 0.87. A slightly higher result was observed in the subscale Presence (5.35 ± 1.14). The results of the research implemented during the period of severe psychological pressure associated with the COVID-19 pandemic provided information on symptoms of traumatic stress in the examined group of nurses. Their sense of security has been lowered and accompanied by an intensified reflection on issues concerning security. However, the sense of meaning (currently felt) in life remains higher than the tendency to searching for it. The surveyed nurses perceive individual support from the so-called significant others (apart from family and friends). They see positive changes resulting from painful experiences related to the COVID-19 pandemic, which can be characterized by adaptation in the form of posttraumatic growth.

Avocado (Persea americana Mill.) plant fruits are well-known for their high nutritional value, unique test, and healthy oil. It has a history of about 10,000 years. Avocado fruit offers many health benefits, and its production is rapidly increasing. The Food and Agriculture Organization (FAO)’s recent data suggest that the Avocados produced in the world in 2019 was twice that of 2010 (3778010 tons). Avocado’s global Gross Production Value was about 5.812 billion USD in 2018, and it is likely to increase rapidly because of the increasing demand for Avocado fruits. Avocado oil is also used in the cosmetic industry because of its therapeutic properties, and it boosts the economic value of the Avocado industry. Avocado fruits have a rough green-gold skin; however, fruits are called ‘the green gold’ because of their massive global demand in the worldwide market and a lucrative business. The cultivation of Avocado has tremendous potential in increasing the rural economy, rural agriculture-based employment and reducing the poverty rate of growers. On the other hand, the Avocado industry is highly criticised because of deforestation, massive water utilisation, polluting water bodies with insecticides and fertilisers, posing a threat to other plant species, and environmental pollution. However, it doesn’t preclude the importance of Avocado. Cameroon’s average temperature is about 23 °C, which is considered optimal for Avocado propagation and commercial cultivation. Cameroon Association of Active Youths (CAMAAY) want to explore the possibilities of engaging Cameroon youths in Avocado cultivation. This review is aimed to provide an overview of Avocado. The review also highlights Avocado cultivation related issues from one health and sustainability perspective in line with the global goals.