In the present paper, we investigate the impact of the timescale factor on the quality of life index behavior on specific time intervals characterized by the presence of socio-economic, political, and/or health severe movements such as pandemics and crises. We essentially aim to show that effectively the quality of life measuring based on a single index in the existing studies may be described more adequately by a variable index due to the social, political, economic, and also healthy environment. The variability discovered is expressed by the existence and the estimation of a multi-index instead of a single one relatively to many factors. Our focus is mainly on the effect of the COVID-19 pandemic on the quality of life. Our model is applied empirically to a sample corresponding to Saudi Arabia as a case of study during the period from January 1990 to December 2021 as the main period affected by the COVID-19 pandemic. The sample is based on social media conversations and texts discussing and describing the satisfaction with the quality of life. The study confirms effectively that the role of the timescale factor is more described when considering a multi-index rather than measurement on the whole time interval.

This study identified and mapped worldwide surveillance actions and initiatives of drinking water quality implemented by government agencies or public health services. The scoping review was conducted between July 2021 and August 2022 based on the Joanna Briggs Institute. The search was performed in relevant databases and grey literature; 49 studies were obtained. Quantitative variables were presented as absolute and relative frequencies, while qualitative variables were analyzed using the IRaMuTeQ software. The actions developed worldwide and their impacts and results provided four thematic classes: (1) assessment of coverage, accessibility, quantity, and drinking water quality in routine and emergency situations; (2) analysis of physical-chemical and microbiological parameters in public supply networks or alternative water supply solutions; (3) identification of household water contamination, communication, and education with the community; (4) and investigation of water-borne disease outbreaks. Preliminary results were shared with stakeholders to favor early knowledge dissemination.

Pesticides are widely used in agriculture as a pest control strategy. Despite the benefits of pesticides on crop yields, the persistence of chemical residues in soil have an unintended impact on non-targeted microorganisms. In this study, we evaluated the impact of the combined fungicide (difenoconazole, epoxiconazole, and kresoxim-methyl) on fungal and bacterial communities of Phaeozem. In the fungicide-treated soil, the Shannon index of both fungal and bacterial communities was decreased, while Chao1 index did not differ compared to the control soil. Among bacterial taxa, the relative abundance of Athrobacter, Sphingomicrobium, and Sphingomonas increased in fungicide-treated soil due to their ability to utilize fungicides and other toxic compounds. Rhizopus and plant-beneficial Chaetomium were the dominant fungal genera, which increased 2-4 times in the fungicide-treated soil, while the relative abundance of Mortierella and Talaromyces decreased. Fusarium acuminatum was the most abundant phytopathogenic fungus that causes root rot disease of wheat, but applied fungicide treatment decreased their diversity in the soil 2 times, which is consistent on the observed plants.

Stream chemistry effectively integrates watershed ecosystem processes on both spatial and temporal scales. Streams of coastal areas integrate a more homogeneous, flat topography wherein there can be interactions between the stream and the body of water into which it drains, especially where tidal fluxes occur. The present study assessed water quality of Thompson Bayou, which comes to the campus of the University of West Florida in a wetland after flowing through 4 km of commercial and private property with associated impacts on water quality. Sampling was carried out for one year at eight discrete sites along Thompson Bayou from the UWF campus to the Escambia River. We used a portable field meter to measure temperature, pH, dissolved O2 (DO), and specific conductivity (SC). Except for temperature, all variables exhibited a spatial pattern of significant variation with distance, with consistent increases in DO and SC as the stream approached the river. These variables also exhibited a temporal pattern of significant seasonal variation, including—and especially—temperature. Data suggest that spatial and temporal patterns of water quality of Thompson Bayou are determined by (1) processing of water by the wetland, (2) interactions of the stream channel with upland forest stands, and (3) the tidal hydrology of the Escambia River.

This study seeks to measure the degree of agglomeration of educational quality in Colombia, based on the non-socialization of the population that exhibits low educational quality, with the population that exhibits high educational quality, and thus determine how such agglomeration affects the phenomenon of academic segregation. To this end, we perform a spatial analysis of the educational quality in Colombia and of variables that may influence to the phenomenon of educational agglomeration. The level of agglomeration in educational quality in Colombia is demonstrated by the calculation of the Moran’s Index, in which a result of 0.62 was obtained. High educational quality is concentrated in the Andean region, while low educational quality is agglomerated in the periphery of the country, in areas such as the Pacific region. A spatial regression model was carried out to measure the dependence of municipalities on their neighbors, and to determine the main socio-economic factors affecting the phenomenon of educational agglomeration in Colombia, finding that living conditions, unsatisfied basic needs and fiscal transparency have all an impact on the educational quality of the municipalities. It is also found that the number of homicides in the municipalities does not seem to have a significant relationship with education.

Background: Crohn’s and Ulcerative Colitis Questionnaire-32 (CUCQ-32) is a validated questionnaire to measure the quality of life (QoL) in inflammatory bowel disease (IBD). However, it does not have stoma specific questions and can be lengthy. This study aimed to validate a subset of the CUCQ-32 that would be suitable for patients with a stoma. Methods: Baseline data were collected from a cohort of patients with acute ulcerative colitis who were participating in the CONSTRUCT multi-centre clinical trial. A subset of the CUCQ-32 questions was selected by stepwise regression. Further validation was examined using data from the UK IBD biological therapies audit. Construct validity was carried out using the EuroQol 5 dimensions (EQ5D) questionnaire, Simple Clinical Colitis Activity Index (SCCAI) and the Harvey-Bradshaw Index (HBI). Literature review and an expert focus group identified supplementary questions to cover patients with a stoma. Test-retest analysis was done during the patients’ second follow up visits. Results: Using the data from 124 patients, a short version questionnaire (CUCQ-12) was developed. Further validation using data from 484 patients with IBD as part of the UK IBD biological therapies audit. Using the data from 61 patients with a stoma, we identified 5 stoma specific questions for the CUCQ-12+. The CUCQ-12+ demonstrated excellent internal consistency (Cronbach’s α= 0.86); established effective reproducibility (intra-class correlation coefficient= 0.74); correlated well with the EQ5D (r= - 0.48), HBI (r= 0.45) and SCCAI (r= 0.43); and represented good responsiveness statistics (>0.5). Conclusions: CUCQ-12+ is a valid and reliable QoL measure that can be used for all patients with IBD in clinical practice including patients with a stoma.

The shrimp industry in the Philippines play a vital role in the local and national economy through exports with markets abroad such as in South Korea, Japan, the USA, and others. This study aimed to describe the various cultural and operational characteristics of small-holder and commercial shrimp farms (P. vannamei) in the Davao region. It also evaluated the current risks and challenges faced by the shrimp farmers. A semi-structured questionnaire that focused on shrimp farmers, and operators in the region was used to collect data with N=41 farmers and operator. The results showed that respondents were engaged in small-holder farming activities which had an average yield of 10 tons/ha. On the other hand, the commercial farms that operate intensively had an average yield of 24 tons/ha. Most small-holder operators used electric generator machines to conduct aeration in their farms using paddlewheels and blowers. For the commercial farms, more paddlewheels and blowers were employed per pond compared to small-holder farms. Generally, the income of a farm was related to the yield of farms or the number of fries rather than social factors or size of farms cultivated. In terms of input costs, feeds were found to have the highest input costs, followed by the fry, fuel, labor, and others (fertilizers and water treatment chemicals). Most of the farmers mentioned that they are affected by diseases such as white spot syndrome (60%), black gills (35%), and red tail (5%). They perceived that the main contamination come from the water source (31%). The main threats mentioned are declining shrimp prices in the market, source of fry, water disposal, and overstocking, and water quality. Based on this study, farmers should follow good shrimp aquaculture practices and there is a need for them to regularly monitor their water quality.

Over the years, researchers have been studying the effect of weather and context data on the transport mode choice. The majority of these works are based on survey data, however the accuracy of their findings relies on how respondents give accurate and honest answers. In this paper, the potential of using GPS trajectories as an alternative to travel surveys in studying the impact of weather and context data on transport mode choices is investigated in Beijing city. In the analysis, we apply both descriptive and statistical models such as the MNL and MNP models. Our findings indicate that temperature has the most prominent effect among weather conditions. For instance, for temperatures greater than 25 °C, the walking share increases by 27% and the bike share reduces by 21%, which is line with the results from several survey studies. In addition, the evidence of government policy on transport regulation is revealed when the air quality becomes hazardous as people are encouraged to use environmentally friendly travel mode choices such as the bike instead of the bus and car, which are known CO2 emitters. Moreover, due to a series of traffic restrictions introduced by the Beijing government during the 2008 summer Olympics, a decrease of 17.5% in the car share and an increase of 13% and 10% in the walking and bus shares, respectively are observed. These findings provide a scientific basis for effective transport regulation and planning purposes.

The concentration of total suspended particles (TSP) and nanoparticles (PM0.1) over Hat Yai city, Songkhla province, southern Thailand was measured in 2019. Organic carbon (OC) and elemental carbon (EC) were evaluated by carbon aerosol analyzer (IMPROVE-TOR) method. Thirteen trace elements including Al, Ba, K, Cu, Cr, Fe, Mg, Mn, Na, Ni, Ti, Pb, and Zn were evaluated by ICP-OES. Annual average TSP and PM0.1 mass concentrations were determined to be 58.3 ± 7.8 and 10.4 ± 1.2 µg/m3, respectively. The highest levels of PM occurred in the wet season with the corresponding values for the dry seasons being lower. The annual average OC/EC ratio ranged from 3.8 - 4.2 (TSP) and 2.5 - 2.7 (PM0.1). The char to soot ratios were constantly less than 1.0 for both TSP and PM0.1, indicating that land transportation is the main emission source. A principal component analysis (PCA) revealed that road transportation, industry, and biomass burning are the key sources of these particles. However, PM arising from Indonesian peatland fires causes an increase in the carbon and trace element concentrations in southern Thailand. The findings make useful information for air quality management and strategies for controlling this problem, based on a source apportionment analysis.

The purposes of this study are to introduce the concept of Service Quality (SQ) in E-Supply Chain Management (E-SCM) and its impact on increasing Customer Satisfaction (CS) and provide insightful enhancements to the literature. In addition, the paper also examines the influence of SQ of E-SCM on CS in online shopping. After a comprehensive literature review, four key factors for measuring the E-Supply Chain (Process Control, Interaction with Supplier, Management Support, and Focus on Customers), four key factors for measuring CS (Informing Customers, Attention to Customers’ Needs, Staff Performance Accuracy, and Easy Access to Services), and four factors for measuring the quality of identification services (Assurance, Accountability, Tangibility and Reliability) were selected. The proposed conceptual model was then presented. This model was validated by data collected through a survey of 150 respondents in order to identify customer satisfaction, including that of customers of online websites in Iran. The sample data was analyzed using SPSS21, after which the interrelationships between the model and factors were examined based on the Partial Least Square-Structural (PLS). Model fit indices were then calculated for the dataset. The proposed model was validated using factor analysis and structural equation modeling techniques. The results indicated that E-SCM has a direct impact on CS. The effect of SQ was also confirmed. A positive and significant relationship was identified between E-SCM and CS, E-SCM and SQ, as well as SQ and CS (P> 0.05). The first limitation was to convince respondents to cooperate with the researchers. The second one was the lack of research-related background due to the subject being relatively new. This study, to the best of the authors’ knowledge, is the first empirical analysis on the CS assessment of SQ of E-Supply Chain in online shopping. This important link to online shopping has rarely been explored. It is expected that by filling this gap, this study will help in strengthening online shopping, which needs a change in the marketing area.

The lordosis of the haemal part of the vertebral column is a frequent abnormality in reared fish. Haemal lordosis develops during the late larval and early juvenile period, mainly due to the high swimming activity of the fish in the rearing tanks. In the present study we examined whether haemal lordosis recovers during the growth of European sea bass. Furthermore, we aimed to develop simple morphometric indices (PrAn1 and PrAn2) that could link the severity of lordosis at the juvenile stage with fish morphological quality at harvesting. At 111 days post-hatching (dph, 53±4 mm standard length, SL), 600 seabass juveniles with lordotic (L, 200 fish) or normal (N, 400 fish) external morphology were selected and introduced in a common tank. At 150 dph (75±7 mm SL), 350 fish were randomly selected, pit-tagged and transferred in a sea cage for on-growing up to 502 dph (234±16 mm SL). The morphological examination of the fish at 150 and 502 dph revealed that the 60% (46 out of 77) of L juveniles turned into normal phenotype by the end of on-growing period. Interestingly, 56% of the fish with recovered external morphology (N-Rec) presented either a completely normal vertebral column (31%) or minor abnormalities of individual vertebrae (25%). Following the results of geometric morphometric analysis, the differences in the body shape between N-Rec and N fish were not significant (p>0.05, canonical variate analysis). The examined morphometric indices were effective in discriminating the normal fish from the 58% (PrAn1) to 65% (PrAn2) of lordotic juveniles. Results are discussed with respect to the mechanism of lordosis recovery, as well as to their application for the quality control and cull out of the abnormal fish in the commercial hatcheries.

Ukraine is an associate member of the European Union and in the coming years it is expected that all the data and services already used by European Union countries will become available for Ukraine. An important program, which is the basis for building European monitoring services for Smart Cities, is the Copernicus program. The two most important services of this program are Copernicus Land Monitoring Service (CLMS) and Copernicus Atmosphere Monitoring Service (CAMS). CLMS provides important information on Land Use in Europe. In the context of Smart Cities, the most valuable one is the Urban Atlas service, which is related to local CLMS services and provides a detailed digital city plan in vector form, which is segmented into small functional areas classified by the CORIN nomenclature. The Urban Atlas is a geospatial layer with high-resolution, which is built for all European cities with a population of more than 100,000 that combines high-resolution sat-ellite data, city segmentation by blocks and functional areas, important city infrastructure, etc. This product is used as a basis for city planning and obtaining analytics on the most important indicators of city development including air quality monitoring. For Ukraine, such geospatial products are not provided under the Copernicus program. It is important to start work on its development and implementation as early as possible, so that when the first city atlas appears, Ukraine will be ready to work with it together with the European community. This requires preparing the basis for na-tional research and training national stakeholders and users to use this product. To make this happen it’s necessary to have national geospatial product, which can be used as an analogue of the city atlas. In this article authors analyzed the existing methods of air quality assessment and assessment of the SDG indicator 11.6.2 achieving for European cities, based on which the indicator 11.6.2 for Ukraine for 5 years was evaluated for the first time. The obtained results are analyzed and the values of indicator 11.6.2 for Ukraine are compared with European countries.

In the present study pomegranate peels and avocado peels and seeds vacuum microwave extraction solid by-products were supplemented in corn silage in order to investigate the effects on meat quality and growth rate in broiler chicken. 50 broilers were divided in two groups treated with experimental or usual fed for 43 days (group A: 25 broilers fed with avocado and pomegranate by-products and group B: 25 broilers fed with corn-silage used as control). The results showed that broiler chickens fed with diet supplemented with a mixture of pomegranate avocado by-products (group A) shown significant differences in chicken leg meat quality improving in significant level the proteins and fatty acids contents in breast and leg meat respectively. More specific ω3 and ω6 fatty acids contents were three times higher than in group B. Moreover protective effect on the decomposition of polyunsaturated fatty acids induced by free radicals presented in chicken meat based on the evaluation of lipid peroxidation by measuring thiobarbituric acid reactive substances. Pomegranate peels, avocado peels and seeds by-products appeared slight reduction on meat production while it was found to improve the qualitative chicken meat characteristics. Regarding the production costs, it was calculated that the corn-silage supplementation used in this study lead to a 75% lower cost than the commercial corn-silage used for the breeding of broilers.

Introduction: People with schizophrenia have poor cardiometabolic health, with elevated 10-year cardiovascular disease risk (CVD-R) scores and poor quality of life (QOL). There is lack of understanding of these issues in early psychosis. Aims: To quantify CVD-R in people with early psychosis and profile their obesity prevalence, lifestyle behaviours and QOL. Secondary aim was to explore associations between lifestyle behaviours/treatment characteristics and CVD-R/QOL. Method:Baseline data from 81 RCT participants were used to profile cardiometabolic health risks (QRISK®3, BMI and waist circumference). Participants self-reported lifestyle behaviours and QOL. Relationships between modifiable treatment/lifestyle factors and QOL/CVD-R were explored using bivariate analyses. Results: Participants’ relative risk for CVD over 10 years was 1.93 times higher than healthy counterparts; 39% also had an obese BMI and physical QOL was poor. No significant associations were observed between CVD-R or QOL with treatment characteristics and lifestyle factors. Discussion: Despite positive lifestyle behaviours, participants had elevated CVD-R scores and poor physical health related QOL. Quantifying CVD-R with QRISK®3 may highlight the need for health promotion interventions. Implications for practice: Mental health professionals should be alert to elevated cardiometabolic health risks in early psychosis, particularly as these can occur in the context of relatively healthy lifestyle behaviours.

Moral identity can promote people’s well-being, but existing research has paid little attention to the mechanism of the link between the two. The current study proposed that the eudaimonic identity function is a critical mechanism that links moral identity and well-being. Specifically, the quality of identity commitment mediates the link between subjective well-being and the two dimensions of moral identity, namely, internalization and symbolization. We examined these hypotheses in 419 participants, who completed the Self-importance of Moral Identity Questionnaire, Satisfaction with Life Scale, Scale of Positive and Negative Experience, and Questionnaire for Eudaimonic Well-being. Results from the obtained data confirmed our hypotheses: There is a significant correlation between moral identity and subjective well-being. Both the internalization and symbolization dimensions of moral identity promote subjective well-being through the mediating role of identity commitment quality. We discussed these findings with respect to implications and proposed research suggestions for future studies.

Abstract: The concept of sustainability applied to sports activities means ensuring that the economic benefits brought about by their development are not obtained at the expense of causing ecological damage or interference in local cultural habits. A cable-ski is a nautical ski system whereby a motorboat is substituted by a cable traction system powered by an electric motor. The effect on the quality of the water in those places that can boast cable-ski facilities has been described in cold freshwater lakes. Objective: Our purpose was to study the evolution of water quality in a ten-year period after the installation of a cable-ski facility in a warm, salted, semi-stagnant pond. Material and Method: Review of the data gathered from the routine test carried out by the Laboratory of the Council of Alcúdia from 2010 to 2019 Results: The levels of dissolved oxygen have increased, being significantly higher in the period 2016 – 2019 than in that of 2010 – 2015. The turbidity of the water has also seen a reduction in the second period with respect to the first. Conclusion: It seems that cable-ski improves the quality of water even warm, high-conductivity, semi-stagnant conditions

Paralyzed patients have always been ideal candidates for physiotherapy due to their body's inability to recover on its own. Regardless of the cause that led to the onset of paralysis (whether localized or generalized), physiotherapy helps these patients with devices and methods designed to restore their proper functioning of the body, as well as quality of life. Obtaining the standing position is the main stage in the therapeutic process, being the indispensable element for the entire protocol. The present study focused on the devices we developed over time, adapting them for each patient, depending on the degree of damage they presented and the possible associated pathologies. At the same time, we wanted these devices to be available for any therapist or even owner, being made of common materials, easy to find, but also affordable.

In Ethiopia, bamboo thickets and woodlands play an important role in soil-water conservation and climate change mitigation in arid and semi-arid regions. However, bamboo mass flower-ing, rapid demographic changes and expansion of agricultural investments to bamboo domi-nated areas have led to deforestation and land degradation. In this study, we determined the effects of deforestation and subsequent cultivation on soil physical and chemical properties along a chronosequence of closely located agricultural lands with different ages (1, 3, 5 and 7 years) since converted from natural lowland bamboo forest. Hence, soil samples (n = 90) have been taken from both natural bamboo forests and adjacent agricultural lands at two soil depths (0-20 cm and 20-40 cm). Our result showed that CEC, K+, Ca+, Mg+ and available P were varied significantly with respect to cultivation periods and soil depth, while soil pH and Na+ varied with soil depth (P < 0.001). Soil C and total N contents (g/kg) in 0-20 cm soil layer declined significantly and exponentially with increasing years under cultivation. Conversion of natural bamboo forest to cropland during the past seven-year period significantly increased soil pH with soil depths, while CEC was declined throughout the cultivation period and soil depth. In general, the result revealed that conversion of natural lowland bamboo and subsequent cultivation of soil had negative effects on measured soil physicochemical properties.

Methanol is a natural ingredient with major occurrence in fruit spirits, such as apple, pear, plum or cherry spirits, but also in spirits made from coffee pulp. The compound is formed during fermentation and the following mash storage by enzymatic hydrolysis of naturally present pectins. Methanol is toxic above certain threshold levels and legal limits have been set in most jurisdictions. Therefore, the methanol content needs to be mitigated and its level must be controlled. This article will review the several factors that influence the methanol content including the pH value of the mash, the addition of various yeast and enzyme preparations, fermentation temperature, mash storage, and most importantly the raw material quality and hygiene. From all these mitigation possibilities, lowering the pH value and the use of cultured yeasts when mashing fruit substances is already common as best practice today. Also a controlled yeast fermentation at acidic pH facilitates not only reduced methanol formation, but ultimately also leads to quality benefits of the distillate. Special care has to be observed in the case of spirits made from coffee by-products which are prone to spoilage with very high methanol contents reported in past studies.

Vaccination against Newcastle disease (ND), a devastating viral disease of chicken, is often hampered by thermal inactivation of the live vaccines, in particular in tropical and hot climate conditions. In the past “thermostable” vaccine strains (I-2) have been proposed to overcome this problem. In the current study, we compared the thermal stability of 6 commercially available ND vaccines. Subjected to 37°C as lyophilized preparation, two vaccines containing I-2 strains were more sensitive to inactivation than a third I-2 vaccine or when compared to three other vaccines based on different strains. However, after reconstitution strains proved to have a comparable tenacity. Interestingly, all vaccines retained a sufficient virus dose for protection (106 EID50) after 1 day at 37°C, still. However, experiments exposing ND-vaccines to elevated temperatures of 51°C and 61°C, clearly demonstrated inactivation of all dissolved vaccines within 2 to 4 hours. The data indicate preparation that specific factors may influence thermal stability rather than strain specific characteristics. Regardless of the ND strain used, the appropriate cold chain is mandatory for live ND-vaccines.

The objective of this paper is to assess the potential for potable water savings due to rainwater use in a precast concrete factory in southern Brazil. The economic feasibility and the rainwater quality were also assessed. The current water consumption, future water demand and rainwater demand in the factory were estimated. The future demand considered was two times higher than the current water consumption since there are plans to increase the production. Three scenarios were then simulated using the computer programme Netuno. The ideal rainwater tank capacity, the potential for potable water savings and the economic feasibility analysis for each scenario were estimated. Samples of rainwater were collected in the factory and tested for quality for manufacturing precast concrete. For a rainwater tank capacity equal to 25,000 litres, the potential for potable water savings for the first scenario was 55.4%, but the first scenario was considered economically unfeasible. For the same tank capacity, the second and third scenarios presented viable results regarding potable water savings and payback. As for the rainwater quality, it was proven to be adequate for manufacturing precast concrete. The main conclusion is that rainwater can be used to manufacture precast concrete in the factory studied herein.

The hypothesis posed was whether participation in LaLiga Genuine Santander (competitive football) influenced the quality of life (QL) of the people who participated in it, since their perception of themselves is enhanced by all the aformentioned factors (self-determination, social inclusion, emotional well-being, physical well-being, material well-being, rights, personal development, interpersonal relationships). The objective was to evaluate the QL of people with Down's Syndrome (DS) using their self-perception (n=39) and the perception of the informants (family members, teachers) (n=39). The KidsLife-Down Scale, with a few modifications was used. In general, differences of opinion between the subgroups of participants with DS and informants showed that results were higher in terms of perception for participants in the DS subgroup. Scores for all variables were higher for those participants with DS who said they did engage in practicing competitive football. Despite the perception of informants provides a great deal of information regarding the QL of participants with DS, the latter should be involved in the evaluation process and their self perceptions taken into account. Our research shows that participation in the league modifies the perceptions of the participants with Down's Syndrome regarding their quality of life. However, these perceptions are not shared by the informants.

This paper aimed to use social media impact on student studies in higher education. Apart from enjoyment and academic purposes, many educational practices and processes have been influenced by social networks. This paper highlighted the use of media tools in higher education as well as indicates out some of the factors. Moreover, through a literature review of related articles, we aim to provide insights into the impacts of a social network on educational quality, actual use of social media, and performance impact in higher education. A questionnaire survey on constructivism was circulated among a total of 206 university students as the key method for collecting data. This research hypothesizes educational quality and actual social media use indicates a positive effect in education, all of which also hypothesizes constructivism for educational quality and actual social media that in turn improve students’ satisfaction, and performance impact. Moreover, all research findings were attained through a quantitative method using the Structural Equation Modeling (SEM-AMOS). Findings of this research to indicate a positive effects students on their academic through behavioral intention to utilize social media to actual social media use for teaching and learning on higher education. Moreover, the results mention the use of social media for learning purpose, as well as social media to enables the sharing of knowledge, discussions, and information to enhance students' learning activities, Further studies are recommended which universities educators should take this into consideration when planning their curricula; it comes to the inclusion of technology in the teaching process.

Background: To investigate any associations between new clinical policies implemented because of the COVID-19 pandemic and harm to patients. Methods: Retrospective data collection of incidents and complaints reported through Datix®, and the Patient Liaison Service respectively. The setting was the Family Health division in a University teaching hospital in the UK. Primary and secondary outcome measures included; Proportion of incidents reported on Datix from 23/3/20 to 25/5/20, compared to the period from 23/3/19 to 29/5/19. COVID-19 related incidents and complaints and association with newly published guidelines or pathways from 23/3/20 to 29/5/20. Results: There was no significant difference in the proportion of overall patient activity resulting in incidents reported on Datix in 2020 (2.08%) compared to 2019 (2.09%), with 98% resulting in no/low harm in 2020. Three incident categories had increases in relative proportions of incidents including terms “COVID” or “Corona” compared to incidents that did not; “Child death”, “delay/failure to treatment and procedure” and “information governance”. One of the child deaths was a miscarriage and we were unable to link the second child death to a change in clinical policy at this stage. We were only able to link 2 COVID-19 associated incidents with a pathway or procedural change (one to the Children's Emergency Department admission pathway and the second to the introduction of virtual antenatal clinics). Eighteen complaints related to COVID-19 were logged. However, at this stage, we are unable to link any of these to a published change in clinical policy. Conclusions: Practice in the division was overall deemed to be safe in the designated period, with only 2 COVID-19 related incidents clearly related to a change in pathways and procedures. Continued surveillance and improved metrics for monitoring the impact of changes to pathways and procedures should be sought with the sustained presence of COVID-19 in clinical areas.

This purpose of the study presented in this article is to comparing different service quality measurements between Kano and TRIZ that plays the critical roles in the catering industrial. Data collected from a DINESERV questionnaire comprises service-quality standards to increase customer satisfaction of mobile dining car. Finally, the TRIZ is standardized measure designed to improve the idealization of strategy for selecting the most appropriate service quality model. In addition, the preferences of more than one decision maker are internally aggregated into the TOPSIS procedure. All these things provide several important theoretical and practical implications for developing a successful mobile catering app.

Aim: The aim of this study was to assess the performance of the SF-36 health survey (SF-36) in a sample of subjects with physical disabilities. Material and Methods: 305 patients recruited using the convenient sampling method from September 2019 to March 2020 in Kermanshah, Iran. Another similar 300 patients were selected to assess the confirmatory factor analysis (CFA). Results: The Cronbach’s α ranged from 0.70 to 0.93, and intra-class correlation coefficients from 0.71 to 0.88; and with the no ceiling and floor effect for two main subscales. Convergent validity was supported by moderate to good correlation between SF-36 subscales and Moorong self-efficacy subscales (r= 0.25- 0.53). The SF-36 divergently validated with HADS total score and subscales (r= -0.24- -0.65), concurrently validated with its subscales (r=0.49- 0.88), and physically discriminated between persons with different level of disability (t-test: p<0.001). Factorial analysis identified seven factors, confirmed with second-order in another 300 samples (chi-square (χ2/df) = 2.61(p < .001); RMSEA = 0.07 (90% CI = 0.07–0.08); AGFI=0.75; GFI = 0.78; CFI= 0.85; and NFI = 0.78). Conclusions: the SF-36 is a reliable and valid tool in physical disables. However, SF-36 shows insufficient eight-factor validity. Future studies should focus on evaluating other psychometric properties, such as sensitivity to change in subjects with physical disabilities.

The coronavirus disease (COVID-19) pandemic caused by spreading rapidly a severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has imposed a unique situation for the humanity. Sao Paulo has reported 124,105 confirmed cases of COVID-19 and 5,623 deaths up to June 14th, being considered the epicenter of the pandemic in Brazil and in South America. Due to the measures for social distancing, there was a drop in the air pollution concentration in Sao Paulo. Starting on March 16th, 2020, we broke 90 days of social distancing into 13 weeks and compared to an equivalent period in 2019. We investigated the air quality improvement during the quarantine period and compared the associated avoided deaths to COVID-19 burden deaths. Nitrogen dioxide (NO₂) was the best indicator of air quality in the analyzed weeks, since its reduction reached 58 %. Our study showed that the 5,623 deaths occurred during the analyzed weeks of quarantine represents an economic health loss of US$ 10.5 billion. In opposite, we observed a significant air quality improvement due to pollutants concentrations’ reductions during the analyzed weeks. Considering PM₁₀, PM_2.5 and NO₂, the decrease of concentration levels respectively avoided 78, 337 and 387 premature deaths and prevented up to US$ 1.5 billion on health costs. These results highlight the importance of continuing to enforce existing air pollution regulations and measures to protect human health both during and after COVID-19 pandemic.

Keenjhar Lake is the main source of drinking water for the metropolitan city of Karachi. The release of untreated wastewater from Kotri industrial area and other sources have made the lake water polluted. This study was subjected to determine the impacts of such pollutant sources on the water quality of Keenjhar Lake. The study involves the analysis of water quality parameters of Keenjhar Lake and its Feeding source (KB Feeder). The sampling sites were selected based on the sources of contamination. The water samples are tested for physical, chemical and microbiological parameters. The result of water analysis indicates the contamination level of the lake is quite alarming for the sites of Kotri effluent and WAPDA colony where Total Dissolved Solids (TDS), Chloride and other ionic metals were quite higher in concentration than other sites. These sites are also contaminated with Fluoride and Arsenic which are carcinogenic elements. The study reveals that the contamination level of feeding source is causing big non-reversible damage to the lake if continued to be uncontrolled. This contamination is mainly due to the release of toxic metals and ions in the KB feeder caused by human carelessness.

The reliability analysis allows to estimate the system's probability of detecting and identifying outlier. Failure to identify an outlier can jeopardise the reliability level of a system. Due to its importance, outliers must be appropriately treated to ensure the normal operation of a system. The system models are usually developed from certain constraints. Constraints play a central role in model precision and validity. In this work, we present a detailed optical investigation of the effects of the hard and soft constraints on the reliability of a measurement system model. Hard constraints represent a case in which there exist known functional relations between the unknown model parameters, whereas the soft constraints are employed for the case where such functional relations can slightly be violated depending on their uncertainty. The results highlighted that the success rate of identifying an outlier for the case of hard constraints is larger than soft constraints. This suggested that hard constraints should be used in the stage of pre-processing data for the purpose of identifying and removing possible outlying measurements. After identifying and removing possible outliers, one should set up the soft constraints to propagate the uncertainties of the constraints during the data processing. This recommendation is valid for outlier detection and identification purpose.

In this paper we evaluate the effects of hard and soft constraints on the Iterative Data Snooping (IDS), an iterative outlier elimination procedure. Here, the measurements of a levelling geodetic network were classified according to the local redundancy and maximum absolute correlation between the outlier test statistics, referred to as clusters. We highlight that the larger the relaxation of the constraints, the higher the sensitivity indicators MDB (Minimal Detectable Bias) and MIB (Minimal Identifiable Bias) for both the clustering of measurements and the clustering of constraints. There are circumstances that increase the family-wise error rate (FWE) of the test statistics, increase the performance of the IDS. Under a scenario of soft constraints, one should set out at least three soft constraints in order to identify an outlier in the constraints. In general, hard constraints should be used in the stage of pre-processing data for the purpose of identifying and removing possible outlying measurements. In that process, one should opt to set out the redundant hard constraints. After identifying and removing possible outliers, the soft constraints should be employed to propagate their uncertainties to the model parameters during the process of least-squares estimation.

Purpose: "Just culture" is an element of safety culture, and in a broader sense – a part of quality culture. It is the subject of studies, especially in healthcare. This phenomenon is almost unknown in Polish medical facilities. For this reason, the aim of the article is to present the essence and significance of "just culture" in healthcare. The other aim of the research is to present the results of the validation of "just culture" assessment instrument used to recognize the "just culture" maturity level and evaluate the nurses’ beliefs and behaviours in the light of "just culture" criteria. Methodology/Approach: The verified questionnaire consisted of 28 statements in relation to which respondents expressed their opinion on a 5-point Likert scale. The questionnaire was distributed among nurses in one of the largest hospitals in Pomorskie Voivodeship, in Poland. The results based on 68 responses were statistically processed with Statistica 13.1 software. Findings: The obtained results allowed to confirm the reliability of the assessment tool, to recognize the level of „just culture” as wisdom (68%) and to indicate strengths and weaknesses of observed beliefs and behaviours. On this basis, improvement actions were proposed. Originality/Value: We use the original, own prepared questionnaire. This is the first study on "just culture" in healthcare in Poland. There are only few studies devoted to patient safety culture in Poland and no research addressed to "just culture" phenomenon, as well in Poland as in Central Europe. The results in this area allow to recommend the assessment tool for other hospitals and seem to help in understanding the essence of "just culture" implementation.

Background: Good clinical practice (GCP) training is the industry standard for ensuring the quality conduct of registrational clinical trials. However, concerns have been raised about whether the current structure and delivery of GCP training sufficiently prepares clinical investigators and their delegates to conduct clinical trials. Methods: We conducted qualitative semi-structured interviews with 13 clinical investigators and 10 research sponsors to 1) examine characteristics of the quality conduct of sponsored clinical trials, including critical tasks and concerns perceived as essential for trial quality, 2) identify key knowledge and skills required to perform critical tasks, and 3) identify gaps and redundancies in GCP training and areas of improvement to ensure the quality conduct of clinical trials. We used applied thematic analysis to analyze the data. Results: The top three tasks identified as critical for the quality conduct of clinical trials were obtaining informed consent, ensuring protocol compliance, and protecting participants’ health and safety. Respondents acknowledged that GCP principles address each of these critical tasks; however, they described many challenges and burdens of GCP training, including high training frequency and repetitive content. Respondents suggested moving beyond GCP training as a mere check-box activity by making it more effective, engaging, and interactive. They also emphasized that applying GCP principles in a real-world, skills-based environment would increase the relevance of GCP training to investigators and their delegates. Conclusion: Our findings indicate that although investigators and sponsors recognize that GCP training addresses critical tasks necessary to the quality conduct of clinical trials, they articulated the need for significant improvement in the design, content, and presentation of GCP training.

The effects of climate change on yield and quality for different climate regions had high uncertainty. Risk assessment is an effective measure to assess the seriousness of the projected impacts for decision-makers. The modified quality model was used to simulate integrated impacts of climate change, environment and management on wheat yield and quality. Then, the Canadian Earth System Model (CanESM2) was used to forecast the daily meteorological data, and Statistical Down Scaling Model was used for downscaling. CERES-Wheat was combined with the forecasted meteorological data to simulate the future wheat yield and grain protein concentration (GPC). The risk of wheat yield and quality in three climatic regions of Shaanxi combined with two climate change scenarios of CanESM2 were assessed. Temperature increased 0.22-3.34 °C and precipitation increased 10-60 mm for RCP4.5 and RCP8.5. Elevated temperature and precipitation had positive effects on yield in all regions. The yield risk of most regions with climate change decreased 3.8%-25.1%. The GPC risk of all regions with climate change decreased 7.3%-27.2%. Irrigation decreased yield risk greatly in all regions, while had totally different effects for the three climatic regions. Yield risk with irrigation decreased 37.7%-52.1% in different climate. In contrast to previous studies, GPC risk with irrigation increased greatly 25.8%-28.9% in humid region, 3.9%-8.8% in sub-humid region, and decreased 37.7%-52.1% in semi-arid region. Climate change decreased yield risk and GPC risk together. While irrigation decreased yield risk greatly in all regions, had totally different effects for the three climatic regions.

Introduction: Patients’ satisfaction was extensively researched over the last decades, given its role in building loyalty, compliance to treatment, prevention, and eventually higher levels of wellbeing and improved health status. Patients’ feedback on the perceived quality of health services can be incorporated into practice; therefore, understanding factors and mechanisms responsible for patients’ satisfaction allows providers to tailor targeted interventions. Method: A questionnaire assessing patients’ perception of the quality of health services was administered to a country-representative sample of 1500 Romanian patients. Using a partial least squares—path modeling approach (PLS-PM), with cross-sectional data, we developed a variance-based structural model, emphasizing the mediating role of trust and satisfaction with various categories of health services. Results: We confirmed the mediating role of trust in shaping the relationship between the procedural accuracy of health professionals, along with the perceived intensity of their interaction with patients, and patients’ experienced quality of the health services. We confirmed the mediating role of satisfaction by the categories of services in the relationship between waiting time on the premises, attention received, and the perceived reliability of the information received, as predictors, and the experienced quality of the health services. In addition, indirect assessment of patients’ satisfaction is a good predictor for direct assessment, thereby affirming the idea that the results of the two types of evaluations converge. Discussions: One of the most efficient solutions to increase both patients’ satisfaction and their compliance is to empower the communication dimension between patients and health practitioners. Given the non-linear relationships among variables, we advocate that, unless the nature of the relationships between satisfaction and its predictors is understood, practical interventions could fail. The most relevant variable for intervention is the degree of attention patients perceive they received. We suggest three methods to turn waiting time into attention given to patients.

IoT is a fast growing technology that has Promising potential for shaping our future. In this fast growing world of IoT, IoT systems are released without proper testing which effect its quality and does not guarantee user satisfaction. Different testing methodologies are carried out to ensure Quality assurance of IoT before releasing it to the market. In this paper we have reviewed different testing techniques using AI and different tools to ensure Quality of IoT. In this paper we have also reviewed different IoT challenges related to its quality.

The main moto of this study is to examine and study on behavior of Software Quality Assurance (SQA) issues of project stakeholders in a Scrum environment and their consequences. This inductive case study identifies SQA principles relevant to Meeting User Expectations. The Stakeholders in the Scrum project having lack of Concrete Guidance on Scrum’s SQA approaches, methods, and techniques. The insufficiency of concrete guidelines in Scrum needs a management squad to develop concepts that can include implementing practices from other methodologies and wisely modifying the system structure to incorporate the practices adopted, ensuring improvement in the processes, and creating a shared ownership environment. Through explaining the incompleteness of Agile approaches with special attention to the lack of concrete instructions in Scrum, the study uses techniques to customize literature and advocate for Scrum’s versatility. The study uses strategies to adapt literature and argue for Scrum’s simplicity by illustrating the incompleteness of Agile approaches with special attention to the lack of concrete instructions in Scrum methodology.

Additive manufacturing (AM) is a promising new technology that is having a very fast growth from home workshops to high-tech cutting-edge factories. As any manufacturing technique, adequate metrology services are needed to assure the quality of items manufactured by AM. One of the most widely used instruments to measure the characteristics of surfaces manufactured with AM is the confocal microscope. In this paper, authors present a whole calibration procedure for confocal microscopes designed to be implemented preferably in workshops or industrial environments rather than in research and development departments. Because of that, it is as simple as possible. The procedure is designed without forgetting any of the key aspects that need to be taken into account and based on classical reference material standards. These standards can be easily found in industrial dimensional laboratories and easily calibrated in accredited calibration laboratories.

The authors of the paper have made an attempt to detect the fibre content and fibre spacing in a steel fibre reinforced concrete (SFRC) industrial floor. Two non-destructive testing (NDT) methods: an electromagnetic induction technique and a radar-based technique were applied. The first method allowed to detect the spacing in subsequent layers located in the thickness of the slab. The result of the second method was a 3D visualization of the detected fibre in the volume of concrete slab. The conducted tests showed aptitude and limitations of the applied methods in estimating fibre volume and spacing. The two techniques also allowed to locate the areas with relatively low fibre concentration which are very likely to be characterized by low mechanical properties.

Shanghai is experiencing water supply problems caused by heavy pollution of its raw water supply, deficiencies in its treatment processes and water quality deteoriation in the distribution system. However, little attention has been paid these problems of water quality in raw water, water treatment and household drinking water. Based on water quality data we show that the raw water sources of the Huangpu River and the Changjiang (Yangtze River) estuary are polluted by microbes (TBC), eutrophication (TP, TN and NH3-N), heavy metals (Fe, Mn and Hg) and organic contamination (chemical oxygen demand [COD], detergent and volatile phenols [VP]). The average concentrations of these contaminants in the Huangpu River are almost double that of the Changjiang estuary forcing a rapid shift to the Changjiang estuary for raw water. In spite of filtering and treatment, TN, NH3-N, Fe, COD and chlorine maxima of the treated water and drinking water still exceed the Chinese National Standard (GB5749). We determine that the relevant threats from water source to household water in Shanghai are: 1) eutrophication arising from highly concentrated TN, TP, COD and algal density in the raw water; 2) increasing salinity in the river estuary, especially at the Qingcaosha Reservoir (currently the major freshwater source for Shanghai); 3) more than 50% of organic constituents and by-products remain in treated water; 4) bacteria and turbidity increase in the course of water delivery to users. The analysis presents an holistic assessment of the water quality threats to metropolitan Shanghai in relation to the city’s rapid development.

We examined the causality between growth opportunities and earnings quality of the emerging economies. We develop an argument that growth opportunities should lead to high-quality earnings of the developing economies against the prior studies from developed economies which posit that growth opportunities result in a lower quality of earnings. The findings revealed that Growth Opportunities had a positive significant effect on Earnings Quality (EQ). Thus, the study concluded that growth opportunities are useful in determining the earnings quality of firms. The study recommends that managers should take advantage of their firms' growth opportunities to provide quality accounting information which will directly provide expanded opportunities for business growth. Though literature confirms that generally, earnings management might not be necessarily bad in business operational practice, managers are advised to avoid extreme aggressiveness in managing earnings as this may culminate in the negative manipulation of accounting information.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

Biostimulants are materials that when applied in small amounts are capable of promoting plant growth. Nanoparticles (NPs) and nanomaterials (NMs) can be considered as biostimulants since, in specific ranges of concentration, generally in small levels, they increase the plant growth. Pristine NPs and NMS have a high density of surface charges capable of unspecific interactions with the surface charges of the cell walls and membranes of plant cells. In the same way, the functionalized NPs and NMS, and the NPs and NMs with a corona formed after the exposition to natural fluids such as water, soil solution, or the interior of organisms, presents a high density of surface charges that interact with specific charged groups in cell surfaces. The magnitude of the interaction will depend on the materials adhered to the corona, but the high-density charges located in a small volume causes an intense interaction capable of disturbing the density of surface charges of cell walls and membranes. The electrostatic disturbance can have an impact on the electrical potentials of the outer and inner surfaces, as well as on the transmembrane electrical potential, modifying the activity of the integral proteins of the membranes. The extension of the cellular response can range from biostimulation to cell death and will depend on the concentration, size, and the characteristics of the corona.

Selenium (Se) is an essential element of the human diet. Therefore, it is necessary to implement Se in agricultural fertilization, although it is not considered as an essential element for plants, Se provides benefits at the level of redox metabolism, increasing the resistance of plants to various stress factors. The increase of the availability of selenium with the use of biopolymer complexes was sought in Great Lakes lettuce grown in substrate pots treated with SeO₂ (5 mg L Se), Cs-PAA + Se (5 mg L Se), and Cs-PAA. The redox metabolism was modified by increasing the enzymatic activity of glutathione peroxidase. The use of Cs-PAA + Se biopolymer complexes increase selenium up to 24 mg/Kg dry weight (DW) in plant tissues.

Abstract: The air pollution dispersion modelling via spatial analyses (Land Use Regression – LUR) is an alternative approach to the air quality assessment to the standard air pollution dispersion modelling techniques. Its advantages are mainly much simpler mathematical apparatus, quicker and simpler calculations and a possibility to incorporate other factors affecting pollutant’s concentration. The goal of the study was to model the PM10 particles dispersion modelling via spatial analyses v in Czech-Polish border area of Upper Silesian industrial agglomeration and compare results with results of the standard Gaussian dispersion model SYMOS’97. Results show that standard Gaussian model with the same data as the LUR model gives better results (determination coefficient 71% for Gaussian model to 48% for LUR model). When factors of the land cover and were included into the LUR model, the LUR model results were significantly improved (65% determination coefficient) to the level comparable with Gaussian model. The hybrid approach combining the Gaussian model with the LUR gives superior quality of results (65% determination coefficient).

Dental implants provide a predictable treatment option for partial and complete edentulism via the placement of fixed permanent artificial root to support prosthetic dental crowns. Despite the high survival rates, long-term implant failures are still reported leading to implant removal and additional financial and health burdens. While extrinsic factors that improve survival rate of implants have been well explored, the impact of genetic factors on this matter is poorly understood. A systematic review and meta-analysis study was conducted to determine whether genetic factors contribute to increase the risk of dental implant failure. A comprehensive search for peer-reviewed articles on dental implants and genetics was performed using various literature database libraries. The study design was conducted according to PRISMA guidelines, and the obtained records were registered in PROSPERO database. According to the exclusion/inclusion criteria, 11 studies were eligible for this study out of 808 articles. The meta-analysis of the combined association studies of DNA variations and dental implants did not indicate an increase risk for implant failure due to DNA variations in IL-1B, IL-10 and TNF-α. This study emphasizes the need for larger randomized controlled clinical trails to inform clinicians and patients about the role of genetic factors on dental implant survival and success rate in healthy and compromised patients.

Conservation agriculture (CA) could be very effective for agricultural sustainability under Mediterranean environments, where farmers rely on short rotation based on durum wheat. In this work we investigated the effect of different combination of tillage treatments and crop sequence (conventional tillage and wheat monocropping, CT-WW; conventional tillage, and wheat following faba-bean, CT-WF; zero tillage and wheat monocropping, ZT-WW; zero tillage and wheat following faba-bean, ZT-WF) on yield, grain quality traits as well as on diseases incidence and severity in durum wheat (var. Saragolla). The results of a two-years of data of a long-term experiment (7-year experiment; split-plot design) are discussed. The CA approach (ZT+WF), which induced always the highest grain yields (6.1 t ha-1 and 3.3 t ha-1 in 2016 and 2017) thanks to an increased number of spikes m-2 (296 vs 269 and 303 vs 287 spikes m-2 in 2016 and 2017, respectively) as well as to a more pronounced ear length, demonstrated significant positive influences in terms of grain quality. It promoted grain protein accumulation (12.1% for ZT+WF versus 11.4% for ZT+WW and 12.4% for ZT+WF versus 10.6% for ZT+WW in 2016 and 2017), improved gluten quality (in terms of SDS sedimentation test) and colour of the grain. The abundance of crop residues determined a higher incidence and severity of Zymoseptoria tritici leaf symptoms under CA system; nevertheless the late appearance of infection was the main reason of not affecting yield and quality traits. The presence of faba-bean (WF) in the rotation significantly reduced leaf symptoms of Z. tritici.

The aim of this paper is to analyze and evaluate Renewable Energy Sources (RES) usage and their contribution to citizens’ life quality. For this purpose, a survey was conducted, using a sample of 400 residents in an urban area of Attica region in Greece. The methods of Principal Components Analysis and Logit Regression were used on a dataset containing respondents’ views on various aspects of RES. Two statistical models were constructed for the identification of the main variables that are associated with RES’ usage and respondents’ opinion on their contribution to life quality. The conclusions that can be drawn show that the respondents are adequately informed about some of the RES’ types while most of them use at least one of the examined types of RES. The benefits that RES offer, were the most crucial variable in determining both respondents’ perceptions on their usage and on their contribution to life quality.

Background: Gluten neuropathy (GN) is defined as an otherwise idiopathic peripheral neuropathy in the presence of serological evidence of gluten sensitivity (positive antigliadin and/or transglutaminase or endomysium antibodies). We aimed to compare the quality of life (QoL) of GN patients with control subjects and to investigate the effect of a gluten free diet (GFD) on the QoL. Methods: All consecutive patients with GN attending a specialist neuropathy clinic were invited to participate. Overall Neuropathy Limitations Scale (ONLS) was used to assess the severity of neuropathy. The SF-36 questionnaire was used to measure participants’ QoL. A strict GFD was defined as effectively been able to eliminate all circulating gluten sensitivity-related antibodies whilst on the diet. Results: Fifty-three patients with GN and 53 age and gender matched controls were recruited. Compared to controls, GN showed significantly worse scores in physical functioning, role limitations due to physical health, energy/fatigue and general health subdomains of SF-36. After having adjusted for age, gender and disease severity, being on a strict GFD correlated with better SF-36 scores on the pain domain of the SF-36 (beta 0.317, p=0.019) and the overall health change domain of the SF-36 (beta 0.306, p=0.017). Conclusion: In GN physical dysfunctioning is the major determinant of poor QoL compared to controls. Routine checking for elimination of gluten sensitivity-related antibodies that results from a strict GFD should be encouraged as such elimination ameliorates the overall pain and health scores, indicating better QoL.

Wikipedia is the most popular and the largest user-generated source of knowledge on the Web. Quality of the information in this encyclopedia is often questioned. Therefore, Wikipedians have developed an award system for high quality articles, which follows the specific style guidelines. Nevertheless, more than 1.2 million articles in Polish Wikipedia are unassessed. This paper considers over 100 linguistic features to determine the quality of Wikipedia articles in Polish language. We evaluate our models on 500,000 articles of Polish Wikipedia. Additionally, we discuss the importance of linguistic features for quality prediction.

A hybrid fuzzy MADM method is proposed in this paper for evaluating airline service quality. Fuzzy set theory is used since it helps in measuring the ambiguity of concepts associated with human being’s subjective judgment. After reviewing service quality evaluation models especially in airline industry, SSQAI model was adopted as a construct for evaluating airline service quality in Iran. Fuzzy DEMATEL was applied to determine the degree of influence and impact of criteria on each other and extract cause and effect relations between them that helped in ranking criteria based on degree of relationship. Then, ANP network map was constructed based on the relation map generated from Fuzzy DEMATEL analysis. Fuzzy ANP approach assisted in prioritizing criteria based on the need for improvement and enabled in a more accurate measurement in decision making process taking the advantage of using linguistic variables. Fuzzy DEMATEL results demonstrates that expertise, Problem-solving, and conduct has the most influence on other factors and in opposite Valence, Waiting Time, Comfort are the factors which get the most impact from other factors and according to Fuzzy ANP analysis Valence, Convenience, Problem-solving, and Safety&Security are the factors with most priorities that need improvement.

The concept of ‘big data’ has been widely discussed, and its value has been illuminated throughout a variety of domains. To quickly mine potential values and alleviate the ever-increasing volume of information, machine learning is playing an increasingly important role and faces more challenges than ever. Because few studies exist regarding how to modify machine learning techniques to accommodate big data environments, we provide a comprehensive overview of the history of the evolution of big data, the foundations of machine learning, and the bottlenecks and trends of machine learning in the big data era. More specifically, based on learning principals, we discuss regularization to enhance generalization. The challenges of quality in big data are reduced to the curse of dimensionality, class imbalances, concept drift and label noise, and the underlying reasons and mainstream methodologies to address these challenges are introduced. Learning model development has been driven by domain specifics, dataset complexities, and the presence or absence of human involvement. In this paper, we propose a robust learning paradigm by aggregating the aforementioned factors. Over the next few decades, we believe that these perspectives will lead to novel ideas and encourage more studies aimed at incorporating knowledge and establishing data-driven learning systems that involve both data quality considerations and human interactions.

Traffic congestion is one of the foremost problems confronted by the urban and suburban tenants of today. Traffic congestion increases vehicle emissions and degrades air quality. Urban planners and policy makers have consequently been always investigating choices to alleviate traffic congestion and to enhance air quality. Teleworking is one option that has received significant consideration and has been studied in the recent past. The aim of the study is to explore the relationship between teleworking, air quality and traffic in Switzerland. The analysis relies on panel individual and household level data over the period 2002-2013. We examine five main air pollutants; the sulphur dioxide (SO₂), the ground-level ozone (O₃) the nitrogen dioxide (NO₂), the carbon monoxide (CO) and the particulate matter less than 10 microns (PM₁₀). Based on the fixed effects estimates, teleworking reduces traffic volume by 1.9 per cent. Furthermore, the reduction observed on air pollution is higher for NO₂, CO and PM₁₀ ranging between 3.3-3.7 per cent, followed by O₃ at 2.3 per cent and SO₂ at 2.1 per cent. According to instrumental variable (IV) approach and the two stage least squares (2SLS) method, the effect is higher ranging between 2.6-4.1 per cent. The respective reduction on traffic becomes 2.7 per cent. Overall, the main concluding remark of the study is that teleworking can be a promising tool for urban planning and development, focusing at the traffic volume reduction, and the air quality improvement. Additional policy implications of teleworking and its beneficial effects for the society are further discussed.

A supply chain management (SCM) system is a strategic cooperative that organically integrates all supply chains to improve the performance of a company. The greatest critical success factor of SCM is partnership. Without cooperation between companies, SCM performance is limited. Does this imply, therefore, that companies within the supply chain can achieve mutual transactions equally? If the power between companies is unequal, how does this affect their partnership? The focus of this study is to assess whether power types enhance SCM performance through partnerships. We categorize power types as mediated and non-mediated. Mediated power is categorized based on coercion, reward, and legitimate, while non-mediated power is categorized based on information, expert, and reference. Therefore, this study examines how power types form a causal partnership relationship within the supply chain, and performs an empirical investigation on how the partnerships influence SCM performance.

This paper addresses the challenges of improving the accuracy of low-cost particulate matter sensors (LCPMS) under high humidity conditions. Such weather conditions often lead to the overestimation of particle counts due to hygroscopic particle growth, resulting in a potential public concern, although most of the detected particles consist of just water. The paper presents an innovative design for an indicative air-quality measuring station that integrates the particulate matter sensor with a preconditioning subsystem designed to mitigate the impact of humidity. The preconditioning subsystem works by heating the incoming air, effectively reducing the relative humidity and preventing the hygroscopic growth of particles before they reach the sensor. To validate the effectiveness of this approach, parallel measurements were conducted using both preconditioned and non-preconditioned sensors over a period of 19 weeks. The data was analyzed to compare the performance of the sensors in terms of accuracy for PM1, PM2.5, and PM10 particles. The results demonstrated a significant improvement in measurement accuracy for the preconditioned sensor, especially in environments with high relative humidity. When the conditions were too severe and both sensors started measuring incorrect values, the preconditioned sensor measured values were closer to the actual values. Also, the period of measuring incorrect values was shorter with the preconditioned sensor. The results suggest that the implementation of air preconditioning subsystems in LCPMS can provide a cost-effective solution to overcome humidity-related inaccuracies, thereby improving the overall quality of measured air pollution data.

Efforts to enhance quality control (QC) practices in chip seal construction have predominantly relied on single surface frictional metrics such as mean profile depth (MPD) or friction number. These metrics assess chip seal quality by targeting issues such as aggregate loss or excessive bleeding, which may yield low friction numbers or texture depths. However, aggregate loss particularly due to snowplow operations doesn't always result in slippery conditions and may lead to uneven surfaces. The correlation between higher MPD or friction number and superior chip seal quality isn't straightforward. This research introduces an innovative machine learning-based approach to enhance chip seal QC. Using a hybrid DBSCAN-Isolation Forest model, anomaly detection is conducted on a dataset comprising 183,794 20-meter MPD measurements from actual chip seal projects across six districts in Indiana. This results in typical 20 m-segment MPD ranges of [0.9, 1.9], [0.6, 2.1], [0.3, 1.3], [1.0, 1.7], [0.6, 1.9], and [1.0, 2.3] for the respective six districts in Indiana. A two-step QC procedure tailored for chip seal evaluation is proposed. The first step calculates outlier percentages across 1-mile segments, with an established limit of 25% outlier segments per wheel track. The second step assesses unqualified rates across projects, setting a threshold of 50% for 1-mile unqualified wheel track segments. While the results are data-specific, this framework offers pavement construction practitioners a foundational QC standard for chip seal projects.

Low-cost personal exposure monitors (PEMs) to measure personal exposure to air pollution are potentially promising tools for health research. However, their adoption requires robust validation. This study evaluated the performance of twenty-one Plume Lab Flow2 (PLF) by comparing its air pollutant measurements, particulate matter with a diameter of 2.5 μm or less (PM2.5), 10 μm or less (PM10), and nitrogen dioxide (NO2), against several high-quality air pollution monitors under field conditions (at indoor, outdoor, and roadside locations). Correlation and regression analysis were used to evaluate measurements obtained by different PLFs against reference instrumentation. For all measured pollutants, the overall correlation coefficient between the PLFs and the reference instruments was often weak (r<0.4). Moderate correlation was observed for one PLF unit at indoor location and two units at roadside location, when measuring PM2.5, but not for PM10 and NO2 concentration. During periods of particularly higher pollution, 11 PLF tools showed stronger regression results (R2 values > 0.5) with one-hour and 9 PLF units with one-minute time interval. Results show that the PLF cannot be used robustly to determine high and low exposure to poor air. Therefore, the use of PLFs in research studies should be approached with caution if data quality is important to the research outputs.

Study Objective: This study examined office workstation types’ impact on objective health-related metrics including stress, physical activity (PA), and sleep quality. We propose a sensor-based sleep quality index (SB-SQI) to fill a needed gap for objective sleep quality measurement over short timescales. Methods: We monitored 231 office workers using chest-worn sensors for 72 hours, yielding 11,736 hours of usable data from 163 participants (mean age 43.4, 56% women). SB-SQI was based on a validated algorithm estimating sleep-onset latency, total sleep time, and sleep efficiency, using the scoring method from the Pittsburg Sleep Quality Index (PSQI). We examined the relationships between SB-SQI, office workstation type (open-bench seating, cubicle, and private office), work-hours stress (standard deviation of heart rate variability), and after-work PA (relative duration of moderate-to-vigorous activity). Results: The sensor-derived poor-sleep ratio of the private office workers was higher than with other office workstation types (81% vs. 66.1%, p = 0.023). PSQI revealed a similar but insignificant trend with a lower effect-size. Among good-sleepers, open-bench seating workers had 22% (p = 0.018) less stress during work hours than others. A significant association between work-hours stress and after-work hours PA (r = 0.331, p = 0.000) was observed irrespective of office workstation type, with the highest PA level observed for open-bench seating workers. Conclusions: Office workstation type had a significant impact on work-hours stress, affecting PA after work hours, which influenced sleep quality. SB-SQI could be more sensitive than PSQI in determining the impact of office workstation types on sleep quality.

One important motivation for the implementation of the Water Framework Directive is the creation of non-market environmental benefits such as improved ecological quality, or greater opportunities for open-access river recreation via microbial pollution remediation. Pollution sources impacting on ecological or recreational water quality can be uncorrelated but non-market benefits arising from riverine improvements are typically conflated within benefit valuation studies. Using stated preference choice experiments, we seek to disaggregate these sources of value for different river users, thereby allowing decision makers to understand the consequences of adopting alternative investment strategies. Our results suggest anglers derive greater value from improvements to the ecological quality of river water, in contrast to swimmers and rowers for whom greater value is gained from improvements to recreational quality. We also find three distinct groups of respondents: a majority preferring ecological over recreational improvements, a substantial minority holding opposing preference orderings and a small proportion expressing relatively low values for either form of river quality enhancement. As such, this research demonstrates that the non-market benefits which may accrue from different types of water quality improvements are nuanced in terms of their potential beneficiaries and, by inference, their overall value and policy implications.

Background: Conventional audiometry assesses hearing in the frequency range of 250–8,000 Hz, while humans can detect sounds from 20–20,000 Hz. Hearing sensitivity above 8,000 Hz can be assessed through “Extended high-frequency audiometry (EHFA)”, which is useful for early detection and monitoring of hearing loss and counseling for tinnitus patients. Despite its usefulness, age significantly affects hearing sensitivity. Currently, there are no standard hearing thresholds in the EHF range categorized by age groups in Thailand. This study aimed to determine normative EHFA data across different age groups in a healthy Thai population. Methods: The study included 134 participants aged 18–70 years, categorized into five age groups. All participants had normal hearing thresholds and type A tympanograms bilaterally. Following this, EHFA measurement was performed. Results: Across all age groups, there was an observed increase in median hearing thresholds as age increased. In comparison, no significant difference in median hearing thresholds was found between individuals aged 18–30 and >30–40 years. However, those over 40 years had significantly higher median thresholds across all frequencies compared to those under 40 years (p40–70 years. Median hearing thresholds for those aged 18–40 was ≤20 dB HL across most frequencies, except at 16,000 Hz (30 dB HL). In the >40–70 age group, thresholds ranged from 20 dB HL at 9,000 Hz to 70 dB HL at 14,000 and 16,000 Hz. However, no significant differences were found in hearing thresholds between sexes and ear sides. Conclusions: This study establishes normative EHFA data for healthy Thai adults, appropriately divided into two groups (18-40 and >40-70 years) for clinical use. Further studies are needed to assess EHFA thresholds in populations with hearing loss-related risk factors.

This work presents an innovative tri-generation system for the simultaneous production of desalinated water, electrical energy, and cooling, aimed at addressing the growing challenges of water scarcity and climate change. The system integrates an 8-stage MSF process and a 6-effect MED process, along with an expander-generator that improves cycle efficiency by utilizing and reintroducing steam within the desalination stages. A parametric study was conducted using ASPEN PLUS to evaluate the system’s performance. The analysis showed that the system operates over a broader pressure and temperature range than conventional MED systems, from 28.3 to 0.8 kPa and from 68 to 4°C, thanks to a dual ejector-condensation process. In cogeneration mode, the system achieves a PR of 12.06 and an RR of 54%0.54, producing 67,219.2 L/day of desalinated water and reducing electrical consumption by 12.03%. In tri-generation mode, it achieves a PR of 17.81 and an RR of 0.80%, with a cooling capacity of 1225 kW (COP of 3.278), producing 99,273.6 L/day of desalinated water while reducing electrical consumption by 3.69%. This system offers an efficient solution to meet the growing water and energy needs of coastal communities, combining water desalination, energy production, and cooling in a single integrated process.

This study explores the intricate relationship between spectral irradiance variations and polar cap mean vertical total electron content (MVTEC) climatology, using ground-based GNSS measure-ments from the Thule station in the Arctic. The analysis focuses on understanding how different solar and magnetospheric processes drive changes in MVTEC patterns over a 2-year period. Three primary factors are identified as key drivers of MVTEC variations: (1) Russell-McPherron Effect: During equinoxes, enhanced energy transfer from the solar wind to the magnetosphere, governed by the Russell-McPherron effect, leads to increased MVTEC variability. This phenomenon arises due to the changing orientation of the solar magnetospheric coordinate system relative to the solar equatorial system, which affects the efficiency of energy deposition in the magnetosphere. As a result, higher ionospheric disturbances are observed during these periods, highlighting the sea-sonal influence of geomagnetic activity on polar cap TEC patterns. (2) Solar Irradiance Variations: The study identifies a strong correlation between fluctuations in solar EUV and F10.7, both proxies for solar irradiance, and the 27-day oscillations in MVTEC, especially during the summer months. These periodic variations are closely tied to the rotational behavior of the sun, suggesting a direct link between solar activity and ionospheric dynamics. The findings emphasize how solar spectral irradiance influences the ionization levels in the polar cap region, with implications for under-standing seasonal and short-term changes in the high-latitude ionosphere. (3) E-Layer Conductivity: Seasonal changes in the E-layer's conductivity also play a crucial role in modulating MVTEC variability. During summer, the presence of a conductive E-layer enhances cross-field plasma diffusion, leading to faster plasma decay and reduced MVTEC fluctuations. In contrast, the winter months are characterized by an insulating E-layer, which slows down plasma decay and allows F-layer structures to persist longer, resulting in increased MVTEC variability. This seasonal dis-parity underscores the importance of the E-layer's physical properties in shaping high-latitude ionospheric behavior. The findings of this study underscore the complex interplay between solar wind activity, solar irradiance, and ionospheric dynamics in shaping the observed patterns of polar cap MVTEC. By revealing the combined effects of solar and geomagnetic processes, this research contributes to a more comprehensive understanding of high-latitude ionospheric variability. Further investigation is needed to fully elucidate the mechanisms behind these interactions, particularly in terms of their implications for space weather forecasting and the operation of navigation systems in polar regions. Enhanced models that incorporate these insights can improve the prediction and mitigation of space weather effects on satellite-based technologies and communication systems.

In plants, melatonin (MT) and abscisic acid (ABA) are conventionally treated as molecules mitigating stress responses. To understand the mechanisms of ABA–MT interplay, we examined the effects of ABA and MT treatment in loss-of-function ABA and MT mutants exposed to high light (HL) stress. ABA constantly suppressed ASMT encoding N-acetylserotonin methyltransferase in the context of differential responses of other MT biosynthesis genes in both wild type (WT) and mutants. However, this response was absent in the mutant with the disrupted ABI4. Given that the ASMT promoter region contains several potential ABI4-binding elements, these data suggest that ASMT can be a potential target gene for ABI4. A role for ABI4 in the interactions between ABA and MT is supported by the finding that ABI4 is constitutively derepressed in the MT signaling mutants cand2 and gpa1, which exhibited elevated steady state levels of ABI4 transcripts and were not regulated by either stress or melatonin. In addition, the abi4 mutant showed increased modulations in the expression of the MT catabolic genes M2H and M3H in response to ABA treatment inferring that this transcription factor is a negative regulator of ABA-dependent changes in MT content. Furthermore, all tested mutants with impaired ABA synthesis or signaling displayed elevated steady state MT levels compared to WT, while MT treatment contributed to downregulation of key ABA synthesis and signaling genes. Collectively, our results suggest that ABA and melatonin act antagonistically modulating the expression of ABA and MT signaling and metabolism genes.

Olivine-like NaFePO4 glasses and nanocomposites are promising materials for cathodes in sodium batteries. Our previous study concerned the influence of high pressure on DC electric conductivity of NaFePO4 glasses. This work presents the results of AC measurements of glasses and nanocomposites from pressure treatment. Depending on the temperature range, the electronic conduction mechanism changed from variable range hopping (between Fe2+/Fe3+centers) to phonon-assisted hopping. For DC electric conductivity the portrayal via the classic Mott’s Variable Range Hopping is limited to low temperatures. Spectra of AC conductivity for glasses and pressure-formed nanocomposites fulfill Jonscher’s scaling law with power exponents ranging from 0.3 to 0.9 depending on temperature and the electron hopping mechanism. Due to the decrease in distance between hopping centers, an increase of AC conductivity around 2-3 orders of magnitude was observed after high pressure-high temperature treatment. Up to 200 K temperature dependencies of AC conductivity follow the pattern suggested by Mott's theory. Above that temperature corresponds to phonon-assisted hopping with activation energies EAC≈0.40 eV (for glass: amorphous solid) and EAC≈0.18 eV (for glass + nanocrystallites nanocomposite). Notable that they are considerably lower than values of EDC for DC conductivity. Results obtained show that high-temperature compressing, just below the glass temperature, significantly leads to a stable decrease in distance between hopping centers related to nanocrystallites in a glassy matrix. Consequently, it leads to an essential rise in electric conductivity and volumetric capacity. AC spectra of electronic conductivity are disturbed by the conduction of Na+ mobile ions, which impacts polaron conductivity and can be a limiting factor for conductivity.

The comprehensive analysis of cross-country skiing races is a pivotal step in establishing effective training objectives and tactical strategies. This study aimed to establish a method for the classifi-cation of sub-techniques and analyzing skiing characteristics during cross-country skiing skating style timed races on snow using high-precision kinematic GNSS devices. The study involved at-taching GNSS devices to the heads of two athletes during skating style timed races on cross-country ski courses. These devices provided precise positional data and recorded vertical and hor-izontal head movements and ground over velocity (VOG). Sub-techniques were classified by de-fining waveform patterns for G2, G3, G4, and G6 based on these data. The validity of classifica-tion was verified by comparing GNSS data with video analysis, a process that yielded classifica-tion accuracies ranging from 94.0% to 99.3% for G2, G3, G4, and G6. Notably, G4 emerged as the fastest technique, with sub-technique selection varying among skiers and being influenced by skiing velocity and course inclination. The study's findings have practical implications for ath-letes and coaches, as they demonstrate that high-precision kinematic GNSS devices can accurate-ly classify sub-techniques and detect skiing characteristics during skate-style cross-country skiing races, thereby providing valuable insights for training and strategy development.

As high strength and ultra-high strength steels are widely used in all kinds of modern welded constructions, a lot of research is carried out to investigate the mechanical properties of weldments of these steels but there is a scarce information on such important characteristic as their corrosion behaviour. This research focuses on the corrosion behaviour of weld metal of weldments of S906QL and S700MC steels. Weld metal was tested electrochemically in a 3,5% NaCl aqueous solution via potentiodynamic scan to determine corrosion rate and its dependence on welding gap. No influence of welding gap on corrosion rate was found but the experimental results suggested that corrosion rate depended on the chemical composition of filler material and the microstructure of weld metal.

Void fillers are required for osseous gaps generated after orthopedic procedures as medial open-wedge high-tibial osteotomy (MOWHTO) to provide sufficient structural support and a rapid osteosynthesis. We developed a novel three-dimensional (3D) printing-based platform technology using the customized 3D scaffolds covered with polycaprolactone (PCL)/β-tri-calcium phosphates (β-TCP)/bone decellularized extracellular matrix (dECM) for use as bone substitute scaffold, which can be effectively exploited to estimate the calculated correction angle with preoperative simulations. PCL/β-TCP/bone dECM scaffolds demonstrated significantly higher cell contain levels in cell seeding efficiency, excellent proliferation capacity, and promotion of early osteogenic differentiation compared with PCL/β-TCP scaffolds. The scaffolds promoted bone mineralization at the early time points of an in vivo study (8 weeks) and exhibited biodegradable properties (38% for 16 weeks). The correction angle measured after osteotomy using 3D printed scaffolds was estimated with high accuracy with low errors (10.3° ± 0.9°), was and was not significantly different even in the presence of lateral cortical hinge fractures. The customized 3D scaffold enriched with PCL/β-TCP/bone dECM yielded excellent cell seeding efficiency, proliferation capacity, early osteogenic differentiation, and bone mineralization outcomes. It is expected to solve the disadvantages related with bone union in MOWHTO, and to replace autografts in the future.

Microsatellite instability (MSI) is a crucial feature in cancer biology, yet its prevalence and significance in canine cancers remain largely unexplored. This study conducted a comprehensive analysis of MSI across 10 distinct canine cancer histotypes using whole-exome sequencing data from 692 tumor-normal sample pairs. MSI was detected in 64% of tumors, with prevalence varying significantly among cancer types. B-cell lymphomas exhibited the highest MSI burden, contrasting with human studies. A novel "MSI-burden" score was developed, correlating significantly with tumor mutational burden. MSI-high (MSI-H) tumors showed elevated somatic mutation counts compared to MSI-low and microsatellite stable tumors. The study identified 3,632 recurrent MSI-affected genomic regions across cancer types. Notably, seven of the ten cancer types exhibited MSI-H tumors, with prevalence ranging from 1.5% in melanomas to 37% in B-cell lymphomas. These findings highlight the potential importance of MSI in canine cancer biology and suggest opportunities for targeted therapies, particularly immunotherapies. The high prevalence of MSI in canine cancers, especially in B-cell lymphomas, warrants further investigation into its mechanistic role and potential as a biomarker for prognosis and treatment response

High entropy alloys have excellent wear resistance, so they have great application prospects in the fields of wear resistance and surface protection. In this study, the wear resistance of FeNiCrCoCu high entropy alloy coating was systematically analyzed by molecular dynamics method. FeNiCrCoCu high entropy alloy was used as a coating material to adhere to the surface of Cu matrix. The friction and nano indentation simulation of this coating material were carried out by controlling the ambient temperature. The influence of temperature on its friction properties was analyzed from five aspects: lattice structure, dislocation evolution, friction coefficient, hardness and elastic modulus. The results show that with the increase of temperature, the disorder of the lattice structure increases, which leads to the increase of the tangential force and the friction coefficient in the friction process. At 300K and 600K, the ordered lattice structure of the high entropy alloy coating material is basically the same, and thus their hardness is basically the same. However, the dislocation density at 600K is significantly reduced compared with that at 300K, resulting in the increase of the elastic modulus of the material from 173GPa to 219GPa. At the temperatures of 900K and 1200k, lattice disorder take place rapidly, and dislocation density also decreases significantly, resulting in a significant decrease in the hardness and elastic modulus of the material. When the temperature reaches 900K, the wear resistance of the FeNiCrCoCu high entropy alloy coating decreases sharply. This work is of great value to the analysis of wear resistance of high entropy alloy at high temperature.

The wide metabolic diversity of microalgae, their fast growth rates, and cost-effective production make these organisms highly promising resources for a variety of biotechnological applications, addressing critical needs in industry, agriculture, and medicine. The utilization of microalgae in consortia with bacteria is proving to be valuable in different biotechnological fields, including treating various types of wastewaters, producing biofertilizers, and extracting various products from their biomass. Monoculture of the microalgae Chlamydomonas has been a prominent research model for many years, extensively utilized in studying photosynthesis, sulfur and phosphorus metabolism, nitrogen metabolism, respiration, and flagella synthesis, among others. Recent re-search has increasingly recognized the potential of Chlamydomonas-bacteria consortia as a bio-technological tool for various applications. Bioremediation of wastewater using Chlamydomonas, and its bacterial consortia presents significant potential for the sustainable reduction of contam-inants, while also facilitating resource recovery and valorization of microalgal biomass. Using Chlamydomonas and its bacterial consortia as biofertilizers can offers several benefits, such as en-hancing crop yield, protecting crops, maintaining soil fertility and stability, aiding in CO2 miti-gation, and contributing to sustainable agriculture practices. Chlamydomonas-bacterial consortia play a significant role in the production of high-value products, particularly in biofuel and en-hancing H2 production. This review aims to achieve a comprehensive understanding of the po-tential of Chlamydomonas monoculture and its bacterial consortia, identifying current applications, and proposing new research and development directions to maximize its potential.

A novel nano-laminated GdB2C2 material was successfully synthesized using GdH2, B4C, and C via an in-situ solid state reaction approach for the first time. The formation mechanism of GdB2C2 was revealed based on the microstructure and phase evolution investigation. A purity of 96.4 wt. % GdB2C2 was obtained at a low temperature of 1500 ℃, while a near full pure GdB2C2 can be obtained at a temperature over 1700 ℃. The as-obtained GdB2C2 presented excellent thermal stability at high temperature of 2100 ℃ in Ar atmosphere due to the stable frame work formed by the high covalent four-members and eight-members B-C rings in GdB2C2. The minimum reflection loss value (RLmin) of -47.01 dB with an effective absorption bandwidth (EAB) of 1.76 GHz at a thickness of 3.44 mm was obtained for the GdB2C2 synthesized at 1500 ℃. The possible EMWA mechanism could be ascribed to the nano-laminated structure and appropriate electrical conductivity, which facilitated to the good impedance matching, remarkable conduction loss, interfacial polarization as well as multiple interface reflection and scattering. The as-obtained GdB2C2, with excellent EMWA performance as well as remarkable ultra-high temperature thermal stability, could be a promising candidate for the EMWA materials applications in extreme ultra-high temperatures.

This research focuses on the Hopf bifurcation occurring at a singular point with high-order degeneracy in a class of three-dimensional systems. Based on center manifold theorem, by expanding the technique for determining singular point values of degenerate singularities in two-dimensional systems, the formal series method to determine the singular point values at the high-order degenerate critical point is discussed. Furthermore, a class of specific three-dimensional differential systems with high-order degenerate singularities is explored. By computing the singular point values and determining center conditions, we proved that a minimum of 5 small-amplitude limit cycles in the vicinity of the origin. This research provides new perspectives on the center problem and limit cycle bifurcation in high-dimensional systems with high-order degenerate singular points.

The partial discharge (PD) event in high voltage insulation releases energy, exerts mechanical pressure, and generates elastic waves. Detecting and locating these PD events through short-duration acoustic pulses is well-established, particularly in gas-insulated systems and oil-insulated transformers. However, its full potential remains untapped in solid insulation systems, where the propagation capability of acoustic pulse and the acoustic reflections pose fundamental challenges to the Acoustic Emission (AE) detection technique. This study investigates the influence of reflections and multiple paths on the propagating acoustic pulse in polymeric insulating materials using a finite element method (FEM) in COMSOL. It was observed that the reflections from the boundary influence the propagating pulse's shape, peak magnitude, and arrival time. An analytical MATLAB model further quantifies the impact of multiple propagation paths on the shape, magnitude, and arrival time of the pulse travelling in a cylinder. Additionally, a Perfect Matched Layer (PML) was implemented in the COMSOL model to eliminate reflections from the boundary, and it revealed that the acoustic pulse magnitude decreases with distance following the inverse square law. In essence, the models aid in measuring how reflections contribute to the observed signals, facilitating the precise identification of the source of the PD event in the tested system.

We investigate the impact of aging on exchangeable inter-arrival times in mixed renewal processes, exploring its implications for reliability and survival analysis. In this study, first, we revisit the definition of renewal point processes, where inter-event time intervals are considered as exchangeable non-negative random variables. Then, we define the concept of statistical aging as latency in the observational process of event counting. Latency affects event detection but preserves exchangeability. However, it may alter the statistical properties of inter-event time intervals. Our analytical and numerical assessments highlight the significance of aging in exchangeable lifetimes, offering insights into key metrics such as the failure survival function, renewal function, and hazard rate function. Through archetypal examples and empirical findings, we illustrate the implications of aging on renewal processes. In particular, employing a Bayesian perspective, we analyze high-frequency currency exchange rate data to assess the impact of aging on volatility risk evaluation. This study contributes novel insights to the literature of renewal theory and survival analysis, emphasizing the role of latency aging in stochastic point processes under exchangeability assumption.

To reduce the redundant counting of TDC in high-speed applications and thus reduce power consumption, a TDC architecture is proposed to quantify the difference between two adjacent rows of pixel signals. This structure can remove the identical part between two rows of pixel signals by adjusting the start and stop signal of the TDC, which will reduce the number of flipping of D flip-flops in the TDC. In the 110nm CMOS process, simulation results show that this design achieves an effective number of bits (ENOB) of 4.72 bits and a Figure of Merit (FoM) of 104.7 fJ/step - 162.3 fJ/step with a power consumption ranging from 60 µW to 93 µW. Compared with traditional counting methods, the proposed TDC can reduce counting power consumption by 30%.

This research investigates the fatigue behaviour and fracture mechanics of high-performance concrete (HPC), including various compositions such as HPC with basalt aggregates (HPC-B), HPC with gravel (HPC-G), and high-strength coarse mortar (CM) static and cyclic tensile loading within the special priority program SPP 2020. The study aims to integrate fracture mechanics into structural analysis to enhance design guidelines for slender cross-sections and safety-related high-performance structural components. The experimental investigations reveal HPC-B's re-markable superiority, displaying higher compressive strength, modulus of elasticity, and tensile strength compared to HPC-G and CM. A modified disk-shaped compact tension (MDCT) based on ASTM standards, aided by digital image correlation (DIC) unveils fracture behaviour, empha-sizing fracture energy as a crucial parameter. HPC-B exhibits improved crack resistance and notch sensitivity reduction attributed to crushed basalt aggregates and enhanced interfacial transition zone (ITZ). The research scrutinizes factors like material characterization, aggregate morphology, stress levels, and displacement rate on crack formation. High-cycle fatigue tests show HPC-B's superior performance, and post-fatigue analysis reveals enhanced residual fracture toughness attributed to nano-level structural changes, stress redistribution and aggregate-matrix interac-tion. 3D image analysis via Computed Tomography (CT) scans captures mesostructural crack propagation and provide quantitative insights. This study advances the understanding of HPC fatigue behaviour, emphasizing the interplay of aggregate types, morphologies, and their dy-namic response to cyclic loading, offering valuable insights for optimizing design guidelines and fostering innovation in structural engineering.

For 80 years high-intensity focused ultrasound (HIFU) has been a significant area for medical research. It is a non-invasive procedure which causes cell death in a highly localised area at a defined distance from the transducer. Since 2000, the clinical indications have broadened considerable as the technology has improved. This review looks back at the history of HIFU and the current clinical indications.

Infrastructure and urban network operators, city users and industrialists are faced with complex issues to ensure the sustainability of the service, maintain, operate and develop their urban sys-tems, while integrating environmental, economic and societal impacts and being resilient to un-expected geopolitical and climatic upheavals. Urban Digital Twins (UDTs), i.e., digital twins for smart cities and territories are considered as promising tools that can enable all stakeholders to collaborate across disciplinary silos and foster digital transformation in urban and territorial pro-jects to ensure sustainability, resilience and increased inventiveness. However, a widely acknowledged challenge to address in the application of UDTs is the lack of interoperability. One significant barrier is the difficulty that stakeholders have in understanding the level of complexity hidden behind this challenge, and thus the adoption of an adequate interoperability technique. This paper proposes a conceptual framework, which is unique for understanding the various lev-els of interoperability required in deploying and using the full potentials of UDTs. We show how such a high-level modeling approach supports the symbolic manipulation of UDTs interoperabil-ity notions and requirements, and thus eases the design of appropriate solutions for large-scale in-teroperable UDTs.

UNESCO highlights socio-emotional, cognitive, and behavioral learning as critical for advancing sustainability. As major events, sports generate significant social, economic, and environmental impacts. This study analyzed how academic background, gender, age, sport type, and modality influenced elite Colombian Olympic and Paralympic athletes' socio-emotional competencies. Methods: Colombian elite athletes who were members of the “Support to the Excellence Coldeportes Athlete” participated in the study. The total population studied included 334 Colombian elite athletes: mean age 27.10 ± 6.57 years old with 13.66 ± 6.37 years practicing his/her sports modality. The socio-emotional competencies of the participants were assessed using the Socio-emotional Competencies Scale (SECS). Results: Men scored higher in interpersonal regulation, self-awareness, conflict resolution, and emotional regulation. Younger athletes (≤25 years) had higher self-consciousness. Individual versus team sports did not differ. Paralympians showed higher motivation, self-awareness, teamwork, and emotional regulation. University educated athletes scored higher in motivation, self-awareness, teamwork, and empathy. All competencies positively correlated. Conclusion: Individualized interventions targeting improved socio-emotional performance are vital for sustainability and should account for differences across gender, age, education, and disability status.

To address friction and wear challenges in dry contacts, manufacturers often employ self-lubricating materials. Graphite and its derivatives stand out as particularly suitable due to their exceptional tribological properties. However, under intense friction conditions, graphite can experience a decline in lubricating efficiency due to severe abrasive wear. This abrasive damage results in elevated activated carbon surfaces with increased surface energy, fostering greater adhesion between sliding surfaces. The low friction coefficient of graphite is not an inherent property but rather a consequence of water vapor adsorption by the material. Beyond 150°C, desorption of the vapor occurs, leading to a transition in the friction coefficient from µ=0.1 to µ=0.6. To address this issue, impregnation solutions for self-lubricating materials have been developed, with various compositions tailored to specific objectives. Common types include molybdenum disulfide, soft metals, or polymers. In this predominantly experimental study, the impact of polymer impregnation on the evolution of friction force and wear rate in graphite material bearings subjected to a dry fretting contact under severe thermal stresses at 270°C was investigated. Additionally, the mechanical stresses in the bearings throughout different phases of our tests were analyzed using a numerical model.

Photovoltaic systems and wind energy systems are generally used in distributed system. However, zero-sequence and harmonic currents occur due to photovoltaic systems, and positive-sequence harmonic currents occur due to wind turbines. Thus, the sheath current in high voltage cables increases due to these currents and poor power quality in distributed generation plants. Metal parts of the cable are grounded to prevent the negative effects of sheath currents. When long high voltage cable lines are grounded with the method in the literature, high sheath current and voltage occur on the cable sheath. Therefore, the SSBLR method is designed as a new method for the distributed generation system. The SSBLR method has been optimized with prediction methods and multi-objective optimization methods to prevent negative effects of the sheath current. Pareto optimal method is used as multi-objective optimization method, and artificial neural network, hybrid artificial neural network and regression methods are used as prediction method. The most dominant result is searched using different estimation and optimization methods in pareto optimal method. When the artificial neural network-genetic algorithm hybrid method is used as a prediction method, and genetic algorithm used as optimization method, significant decreases are observed in sheath current and voltage.

The effects of different pulse frequencies on the microstructure grain size and solid solubility of Al-9Si alloy were systematically investigated using OM, SEM, and EDS. The effects on the mechanical properties of the alloy were analyzed using micro-Vickers hardness tester and multifunctional friction tester. During the solidification process, the Al-9Si alloy is exposed to high-frequency electric current pulses with a current density of 300A/cm2 and frequencies of 0Hz, 500Hz, 1 000Hz, and 2 000Hz. The experimental results show that as the high-frequency pulse frequency increases, the Lorentz force also increases. The intense electromagnetic stirring leads to grain refinement. However, as the pulse frequency continues to increase, the combined effect of Joule heating and Lorentz force results in an enlargement of the melt zone and an increase in grain size. At a pulse frequency of 1 000Hz, the eutectic structure size of the Al-9Si alloy is optimal, with the average size reduced to 13.87μm and a dense distribution, effectively eliminating primary Si. The EDS results revealed that the high-frequency pulse led to a more uniform distribution of Si elements within the matrix, and the solid solubility of Si in the α-Al matrix increased to a maximum value of 1.99%, representing a 39.2% increase. At a pulse frequency of 1 000Hz, the sample demonstrates the most favorable mechanical properties, with the friction coefficient reaching a minimum value of 0.302, representing a 37.7% decrease in the average friction coefficient. The results demonstrate that high-frequency pulsing is an effective method for enhancing the mechanical properties of Al-9Si alloy.

Cathode materials play a key role in the development and application of lithium-ion batteries, but the unfavorable factors such as structural phase transformation and low conductivity in the cycling process restrict the further improvement of battery performance, so the development and modification of high-performance cathode materials is a current research hotspot. LiNixCoyMn1-x-yO2(x≥0.6), a high-nickel cathode material, has the advantages of high platform potential, high energy density and low cost, and is an ideal material to achieve the goal of 300 Wh kg-1 and above for batteries. However, its poor thermal stability, poor interface stability, safety and life cannot meet the requirements of current power batteries. In this paper, the research status of high-nickel cathode materials is introduced, including bulk doping and surface coating, and the modification method of doping and coating integration is also introduced. Finally, we put forward the prospect of the future development trend of high-nickel cathode materials.

Background: This study, conducted in October 2017 at two Canadian universities, aimed to explore the relationships between gender expression, protective coping strategies, alcohol saliency, and high-risk alcohol use. Methods: Validated scales were employed to assess these variables using survey data. Multivariate analyses were conducted to investigate the associations between these factors and high-risk drinking. Results: The study revealed significant associations between high-risk drinking and androgynous gender roles (OR=1.58, 95% CI: 1.19-2.10) as well as among self-reported males (OR=2.21; 95% CI: 1.77-2.75). Additionally, protective behavioral strategies were inversely related to high-risk drinking (OR=0.95; 95% CI: 0.94-0.96), while higher alcohol saliency exhibited a positive correlation with high-risk drinking (OR=1.12; 95% CI: 1.11-1.14). Conclusions: These findings underscore the importance of considering gender, alcohol saliency beliefs, and protective behavioral strategies in the development and refinement of interventions aimed at reducing high-risk alcohol use on Canadian campuses.

Bronchiolitis is an acute viral infection of the lower respiratory tract that affects infants and young children. Respiratory syncytial virus (RSV) is the most common causative agent, however other viruses can be the reason of the disease. We retrospectively reviewed the clinical features of infants aged less than 12 months referred to our Pediatric Units of Chivasso, Cirié and Ivrea for acute bronchiolitis requiring hospitalization over two consecutive bronchiolitis seasons. Patient-, disease- and treatment related variables were analyzed in this retrospective study. We were able to show how with the high flow oxygen support (HFNC) only a very low number of children (8 out of 192) need to be trasferred to our HUB referral centers. The probability of success were 96% for all patients and 93% for RSV vs. 98% for non-RSV patients (P=NS). Factor associated to failure of treatment were age below 1 months and the failure of HFNC. The wide and increasing use of HFNC in pediatric inpatients improved management of bronchiolitis in Spoke hospitals, reducing transfer to a Hub hospital provided with Intensive Care Units.

Large epidemiological studies show U-shaped relationships between high-density lipoprotein cholesterol (HDL-C) levels and all-cause mortality in individuals without atherosclerotic cardiovascular diseases (ASCVD). Association in those with ASCVD by sex is unclear. We examined the association between HDL-C levels and 10-year all-cause mortality in subjects (≥40 years of age) with ASCVD using the 2010 National Health Insurance Service and the National Death Registry of Korea. We categorized HDL-C levels into three groups (low: <40 mg/dL for males, <50 mg/dL for females; high: 40-90 mg/dL for males, 50-90 mg/dL for females; extremely high: >90 mg/dL) and 10 mg/dL intervals. We conducted a sex-stratified and adjusted Cox proportional hazards analysis. Out of 1,711,548 individuals (54% female, mean age 61.4 years), 10-year mortality was observed in 218,252 (12.8%). Males had a higher mortality rate than females (16.2% vs 9.8%; P<0.001). When adjusting for age, body mass index, LDL-cholesterol, triglycerides, hypertension, diabetes, smoking, and alcohol consumption, the low and extremely high HDL-C groups had significantly higher hazard ratios for 10-year mortality compared to the high HDL-C group in males [1.183 (1.166-1.199), 1.359 (1.288-1.434)] and in females [1.153 (1.138-1.169), 1.095 (1.029-1.167)]. The frequency distribution bars for the 10-year mortality rate showed sex-specific nadirs of 50-59 mg/dL in males and 70-79 mg/dL in females. In this ASCVD cohort, the extremely high HDL-C (>90 mg/dL) group had 35.9% and 9.5% higher 10-year mortality risk than the high HDL-C group for males and females, respectively. There was a slightly U-shaped relationship between baseline HDL-C levels and 10-year mortality rate, with earlier inflection in males than in females.

Grouting materials with good insulation and reinforcement performance are key factors in solving the temperature control problem of high temperature tunnels using curtain grouting, while existing grouting materials cannot balance their working performance and insulation performance in high-temperature environments. In response to the above issues, this article uses red mud to prepare high ground temperature red mud based grouting materials (RMGS), and conducts tests on the working performance (viscosity, setting time, compressive strength) and insulation performance (thermal conductivity, specific heat capacity) of grouting materials at different temperatures (20, 40, 60, and 80 ℃), and analyzes the variation patterns and micro mechanisms of various characteristics with temperature. The results indicate that an increase in temperature will accelerate the viscosity development and condensation of the grouting material, and lead to a decrease in thermal conductivity and specific heat capacity. In addition, an appropriate temperature can also improve the compressive strength of the material. The increase in temperature will accelerate the hydration reaction rate of the grouting material and the development of internal pores, which is the reason why temperature affects the performance of the grouting material. In engineering applications, cement slurry is suitable for static water grouting, cement-sodium silicate slurry is suitable for dynamic water grouting, and RMGS is suitable for high-temperature tunnel grouting.

Nickel is widely used in industrial processes and plays a crucial role in many applications. However, most of the nickel resource mainly exists as nickel oxide in laterite nickel ore with complex composition, resulting in difficulty in upgrading the nickel content using physical separation methods. In this study, high-grade ferronickel concentrates were obtained through a carbothermal reduction and magnetic separation using laterite nickel ore and anthracite as raw materials. The effects of different types of additives (CaF2, Na2SO4 and H3BO3), carbon ratio (nc/no in metal oxides) and grinding time on the recoveries and grades of ferronickel concentrates were experimentally investigated, along with the microstructure and chemical composition of the products. CaF2 was proved to be the primary active additive in the aggregation and growth of the ferronickel particles, and the improvement of the grade of the product. Under the optimal conditions of CaF2 addition of 12 wt.%, carbon ratio of 1.4, and grinding time of 240 s, high-grade magnetically separable ferronickel concentrate with nickel grade 8.93 wt.% and iron grade 63.96 wt.% was successfully prepared. This work presents a practical method for the highly efficient recovery and utilization of iron and nickel from low-grade laterite nickel ore, contributing to the development of strategies for the sustainable extraction and utilization of nickel resources.

With rising rates of human obesity, the study aimed to determine the relationship between maternal diet-induced obesity and offspring morphometrics and behaviour in mice. Pregnant and lactating female mice fed a diet high in fat and sugar (HFHS) commonly consumed by human populations showed decreased food, calorie, and protein intake but increased adiposity at the expense of lean mass. The pre-weaning body weight of HFHS offspring was reduced for the first postnatal week but not thereafter with HFHS female offspring having higher body weights by weaning, due to continuing higher fractional growth rates. Post-weaning, there were minor differences in offspring food and protein intake. Maternal diet, however, affected fractional growth rate and total body fat content of male but not female HFHS offspring. Maternal diet did not affect offspring locomotor activity or social behaviour in either sex. Both male and female HFHS offspring displayed reduced anxiety-related behaviours with sex differences in particular aspects of the elevated plus maze task. In the novel object recognition task, performance was impaired in male but not female HFHS offspring. Collectively, the findings demonstrate that maternal obesity alters the growth, adiposity, and behaviour of male and female offspring, with sex-specific differences.

Trichomonas vaginalis is an extracellular parasite protozoan that causes human trichomoniasis, a sexually transmitted infection (STI) that affects approximately 200 million people worldwide. The presence of T. vaginalis adhesion to inert substrates has been described in several reports. Still, very few studies on cluster formation and more detailed analyses of the contact regions between the membranes of the parasites in these aggregate formations have not been carried out. We analyzed the formation of parasite monolayers and clusters using high-resolution scanning electron microscopy, transmission electron microscopy, cytochemistry, TEM tomography, and dye injection. Here, we show the formation of a monolayer of tightly adherent cells, epithelium-like, when the parasites are in contact with an inert material. Based on this observation, we analyzed whether this monolayer behaves as an epithelium, analyzing cell junctions, cell communication, and ultrastructural aspects. We also analyzed the cluster formation and the morphological characteristics of parasite aggregation observed in the culture supernatant. We report that monolayer formation differs from cluster formation in many aspects. The monolayers form strong adhesion, whereas the clusters have fragile attachments. There is no fusion or passage of molecules between neighbor-attached cells; there is no need for different strains to form filopodia, cytonemes, and extracellular vesicles during cluster formation.

: In the automotive industry, high-strength plates have been increasingly used to reduce the vehicle body weight due to stringent regulations on fuel economy and safety. Such plates achieve tensile strengths as high as 1.5 GPa owing to the hot-stamping process. However, these plates suffer from scale generation and surface decarburization because of the surface oxidation of the material. Recently, studies on materials subjected to high-frequency induction heating have reported strength improvement owing to the coil shape and cooling method. This study presents the surface temperature changes, mechanical properties, and microstructures of boron steels subjected to longitudinal heating, which uses eddy currents generated from high-frequency induction heating. The surface temperature data were analyzed under different high-frequency induction heating powers (15, 18, 21, 24, 27, and 30 kW) and distances from the specimen (6, 9, and 15 mm). The mechanical properties and microstructures were also analyzed in different high-frequency induction heating coil directions. The correlations between the high-frequency induction heating power and the distance from the specimen with the maximum tensile strength were determined.

This study presents a comprehensive investigation of the formation, composition, and behaviour of oxide layers during the high-temperature oxidation of four different steel alloys (16Mo3, 13Cr, T24 and P91) at a uniform temperature of 650 °C. The research combines CALPHAD (CALculation of PHAse Diagrams) calculations, thermogravimetric analysis (TGA) and advanced microscopy techniques, including scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD), to elucidate the complex mechanisms controlling oxidation kinetics and oxide layer development. CALPHAD calculations were used to determine the thermodynamically stable phases for each steel type at 650 °C. The results showed different phase compositions, highlighting the importance of steel composition in the formation of oxide layers. Each steel grade exhibited different kinetics, with 16Mo3 steel showing the highest oxidation rate, followed by 13Cr, T24 and P91. This variability highlights the role of steel composition, particularly chromium content, in determining oxidation behaviour. These results have significant implications for temporary overheating in industrial applications and contribute to a deeper understanding of oxidation processes in steels.

Pharmaceutical poisoning is a significant global public health concern, causing approximately 190,000 deaths yearly. This scoping review aims to comprehensively map the available literature on pharmaceutical poisoning and compare patterns between high-income countries (HICs) and low-middle-income countries (LMICs). A systematic search was performed across the following databases: Embase, PubMed, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, and CINAHL. Studies included were from 1st January 2011 to 31st December 2020, in English, with full text available. Seventy-nine articles were included in the study; 21 were from LMICs and 58 were from HICs. The toxic exposure was largely intentional (77%) in LMICs and accidental (68%) in HICs. Drugs acting on the nervous system were responsible for 95% of toxicities worldwide with analgesics accounting for the largest subtherapeutic group in both LMICs (40%) and HICs (58%). Notable statistics were that HICs accounted for 99% of opioid overdoses, and LMICs accounted for 19% of anti-epileptic-induced toxicities. Overall, the medical outcomes of poisonings were generally worse in LMICs. The review provides possible interventions to target specific geographic locations, based on the trends identified, to reduce the burden worldwide. Many gaps within the literature were recognised, calling for more robust analytical research.

The paper presents a simplified laminar model with which the deformation of soil layers (base, subbase and subgrade courses) under flexible pavements due to repeated traffic load can be determined. In the first step, the cyclic strain amplitude is calculated using a nonlinear material model that is based on particle size distribution parameters (d50 and CU) and dependent on the mean normal stress, relative density and actual strain level. In the second step, the HCA (High Cycle Accumulation) model is used to calculate the residual settlement of each sublayer as a function of the number of cycles. It is shown that the developed model is suitable for describing different types of subgrades and pavement cross-sections. It is also demonstrated with finite element calculations that the developed model describes both the elastic and plastic strains sufficiently accurately. The developed model can predict the settlement and rutting of pavement structures with sufficient accuracy based on easily available particle size distribution parameters without the need of complex laboratory and finite element tests.

This study investigates the nonlinearities in three-phase inverters for SiC-based systems and compares their performance to IGBT-based systems. An analytical model of inverter voltage distortion is developed, which accounts not only for dead time (td), switching delay time, switching frequency (fs), and voltage drops of power devices, but also for output parasitic capacitance (Cout). Experimental tests validate the model, which provides a more accurate estimate of the inverter’s output phase voltage distortion. The power device characteristics are obtained from datasheets, while Cout is determined through experimentation. Three-phase inverters with varying switching frequencies, fundamental frequencies, and dead-time values are used in simulations and experiments to determine the influence of nonlinearity on phase voltage deviation and current distortion. The results show that, due to SiC devices’ faster switching time, the phase voltage deviation and phase current distortion are lower in SiC-based inverters than in IGBT-based ones for high-frequency applications, as the dead time can be reduced.

Type 1 diabetes (T1D) is associated with hyperglycaemia-induced hypoxia and inflammation. The study assessed the effects of a single high-intensity interval exercise (HIIE) on glycaemia (BG) and serum level of pro-inflammatory cytokines and an essential mediator of adaptive response to hypoxia in T1D patients. The macronutrients intake was also evaluated. Nine patients suffering from T1D for about 12 years and nine healthy individuals (CG) were enrolled and completed one session of HIIE at the intensity of 120% lactate threshold and duration of 4 x 5 min intermittent with 5 min rest after each bout of exercise. Capillary and venous blood was withdrawn at rest, immediately after and at the 24 h post-HIIE for analysis of BG, hypoxia-inducible factor alpha (HIF-1α), tumour necrosis factor alpha (TNF-α) and vascular-endothelial growth factor (VEGF). Pre-exercise BG was significantly higher in the T1D compared to the CG (p = 0.043). HIIE led to a significant decline in T1D patients’ BG (p = 0.027) and to a tendency for a lower BG at 24-h post-HIIE vs pre-HIIE. HIF-1α was significantly elevated in the T1D compared to CG and there was a trend for HIF-1α to decline, and VEGF, TNF-α to increase in response to HIIE in the T1D group. Both groups consumed higher and lower than recommended amounts of protein and fat, respectively. In T1D group, a tendency for a higher digestible carbohydrate intake and more frequent hyperglycaemic episodes on the day after HIIE were observed. HIIE was effective in reducing T1D patients’ glycaemia and improving the short-term glycaemic control. HIIE has the potential to improve adaptive response to hypoxia by elevating the serum level of VEGF. Patients’ diet and level of physical activity should be screened on a regular basis, and they should be educated on the glycaemic effects of digestible carbohydrates.

This paper introduces an advanced method that integrates contingent valuation and machine learning (CVML) to estimate residents’ demand for reducing or mitigating environmental pollutions and climate change. To be precise, CVML is an innovative hybrid machine-learning model, and it can leverage a limited amount of survey data for prediction and data enrichment purposes. The model comprises of two interconnected modules: Module I, an unsupervised learning algorithm, and Module II, a supervised learning algorithm. Module I is responsible for grouping the data into groups based on common characteristics, thereby grouping the corresponding dependent variable, whereas Module II is in charge of demonstrating the ability to predict and the capacity to appropriately assign new samples to their respective category based on input attributes. Take a survey on the topic of air pollution in Hanoi in 2019 as an example, we found that CVML can predict households’ willingness– to– pay for polluted air mitigation at a high degree of accuracy (i.e., 98%). We found that CVML can help users reduce costs or save resources because it makes use of secondary data that is available on many open data sources. These findings suggest that CVML is a sound and practical method that could be widely applied in a wide range of fields, particularly environmental economics and sustainability science. In practice, CVML could be used to support decision-makers in improving the financial resources to maintain and/or further support many environmental programs in years to come.

As an important organelle in eukaryotic cells, Golgi apparatus is responsible for processing and transporting proteins and lipids in cells. Precise monitoring the status of Golgi apparatus by targeting fluorescence imaging technology is of enormous importance but remains an attractive yet dramatically challenging task. In this study, we report the construction of the first Golgi apparatus targeted sensor with bright near-infrared fluorescence, termed as Golgi-Pdots. As a start point of our investigation, hydrophobic CDs with bright NIR fluorescence at 674 nm (fluorescence quantum yield : 12.18%), narrow emission band of 23 nm, and excellent stability were facilely prepared from Magnolia Denudata flowers through an ultrasonic method. Incorporating the CDs into a polymer matrix modified with Golgi-targeting molecules can produce the water-soluble Golgi-Pdots, which showed high colloidal stability and similar optical properties as compared to CDs. Further studies revealed that the Golgi-Pdots showed good biocompatibility and Golgi-targeting ability. Based on these fascinating properties, Golgi-Pdots have been successfully used for long term bioimaging of Golgi apparatus inside live cells.

Bi0.5Na0.5TiO3-0.06BaTiO3 (BNT-BT) thin films were prepared by both chemical solution (CSD) and pulsed laser deposition (PLD). The microstructure, dielectric, and ferroelectric properties were investigated. High stability of the dielectric permittivity (∆ɛ/ɛ(150 °C) ≤ ± 15%) over a wide temperature range from room temperature to 300 °C was obtained. Distinctly, the CSD film showed high TCC stability with variation of ± 5% up to 250°C. Furthermore, the CSD film showed an unsaturated ferroelectric hysteresis loop characteristic of the ergodic relaxor phase, however the PLD one exhibited almost saturated loop signature of the coexistence of both ergodic and non-ergodic states. The energy storage properties of the prepared films were determined using the P–E loops obtained at different temperatures. The results showed that these films exhibit stable and improved energy storage density comparable to the ceramic capacitors. Moreover, the CSD film exhibited more rigidity and better energy storage density that exceeds 1.3 J/cm3 under low applied field of 317 KV/cm as well as interesting efficiency in a large temperature range. The obtained results are very promising for energy storage capacitors operating at high temperatures.

Ozonated sunflower oil (OSO) is an established therapeutic agent and nutraceutical harboring various therapeutic values, including antiallergic, derma-protective, and broad-spectrum antimicrobial activity. Conversely, the medicinal aspects of OSO for wound healing, tissue regeneration, and treatment of inflammation in dyslipidemia have yet to be fully elucidated. Herein, a comparative effect of OSO and sunflower oil (SO) was investigated to heal cutaneous wound and tissue regeneration of zebrafish impediment by carboxymethyllysine (CML) toxicity, following impact on hepatic inflammation and blood lipid profile. After OSO (final 2%, 1 μL) and SO's (final 2%, 1 μL) treatment, substantial healing was elicited by OSO in the cutaneous wound of zebrafish impaired by CML (final 25 mg). As an important event of wound healing, OSO scavenges the reactive oxygen species (ROS), rescues the wound from oxidative injury, and triggers the essential molecular events for the wound closer. Furthermore, the intraperitoneal injection of OSO was noted to counter the CML-induced adversity and prompt tissue regeneration in the amputated tail fin of zebrafish. Additionally, OSO counters the CML-induced neurotoxicity and rescues the zebrafish from acute mortality and paralysis, along with meticulous recovery of hepatic inflammation, fatty liver changes, and diminished ROS and proinflammatory interleukin (IL)-6 production. Besides, OSO efficiently ameliorated CML-induced dyslipidemia by alleviating the total blood cholesterol (TC), triglyceride (TG) and increasing high-density lipoproteins cholesterol (HDL-C). The outcome of multivariate assessment employing principal component analysis and hierarchical cluster analysis supports a superior therapeutic potential of OSO over SO against the clinical manifestation of CML. Conclusively, OSO owing to its antioxidant and anti-inflammatory potential, counters CML-induced toxicity and promotes wound healing, tissue regeneration, hepatoprotection, improved blood lipid profile, and survivability of zebrafish.

A CoCrFeNiNb0.65 eutectic high-entropy alloys (EHEAs) prepared by arc melting were irradiated with a 100 keV He+ ion beam. Swelling, helium bubbles and mechanical response induced by irradiation were evaluated. When the ion fluence reached 1.0×1018 ions/cm2, the irradiation-induced swelling occurred on the sample surface, and as the ion fluence increasing, the swelling became increasingly severe and the surface of Nb-rich phase appeared peeling and shedding. Meanwhile, along the boundaries of matrix and Nb-rich phase there was a neat line of helium bubbles. The size of these helium bubbles decreased with distance from the center of the helium bubble layer. This result indicated that the phase boundaries were favorable sites for the nucleation and gathering of helium bubbles. Nanoindentaion results indicated that hardening and softening induced by He+ ion irradiation occurred in various ion fluences. At ion fluence of 5.0×1017 ions/cm2, the CoCrFeNiNb0.65 EHEAs exhibited an obvious hardening behavior, which can be explained by dislocation-dominated hardening effect. When the ion fluence reached 1.0×1018 ions/cm2 and 2.0×1018 ions/cm2, the hardening effect decreased probably due to the helium bubble aggregation and growth, as well as helium bubbles induced noncompact structures. The results of this study provide insights into the effect of helium bubbles on mechanical evolution and pave the way for designing EHEAs suitable for the nuclear industry.