This study examines the environmental challenges faced by Malaysian industries in adhering to industrial effluent regulations with the research question, what are the challenges in complying with environmental legislations from industries? It investigates the primary factors contributing to non-compliance and the perspectives, knowledge, and needs of Malaysian industries regarding environmental compliance. This study recommends the best strategy for promoting self-compliance. Thirteen stakeholders from various industries with environmental management experience were interviewed. Over the past seven years, these industries have shown low com-pliance with the Industrial Effluent Regulation 2009, prompting an exploration of their adaptability to regulations. Challenges identified include cost, employee attitudes, technology, management support, public complaints, and jurisdictional issues. Responses varied from divergent to unified viewpoints, highlighting the complexity of compliance issues. Respondents suggested enhancing compliance through behavioral changes, including incentives, enforcement, awareness, guidance, industry ratings, management commitment, and public disclosure of emissions. Suggestions for improvement and innovative solutions emerged based on participants' experiences, emphasizing the importance of continuous improvement. The study emphasizes the government's crucial role in ensuring regulation adherence but underscores the need for analyzing barriers and exploring alternative approaches. Understanding industry perspectives and strategies is essential for progress. Compliance, however, requires an analysis of the current challenges and adopting adaptive measures. It is important to understand industries' perspectives and strategies to move forward.

Various wood fibres, including pine and flax, are used in wood–plastic composites (WPCs). This paper studies the effect of the lignin content on the morphological and thermal degradation and damage due to the ultraviolet (UV) aging of polypropylene/flax (PP-flax) and polypropylene/pine (PP-pine) fibres composites. Flax and pine fibres exhibited distinct densities of 1.51 and 1.47 g/cm³, respectively, potentially influenced by growth factors and varying compositions of light substances, such as hemicellulose, lignin, and impurities. The thermal decomposition mass loss increased proportionally with the percentage of lignin in the fibre. From 238°C to 390°C, the pine fibre exhibited a 72% mass loss compared to flax fibre, which showed a 54% mass loss, owing to the higher lignin content in pine fibres. Based on differential scanning calorimetry (DSC), the fibre composition affected the material melting temperature. Moreover, DSC curves revealed a higher degree of crystallinity in the case of the PP-flax biocomposite (12%) compared to pure polypropylene (9%) and PP-pine (6%). This result can be attributed to the high content of crystalline components in flax fibres, such as cellulose. Acoustic emissions analysis confirmed that the high lignin content delays degradation and mitigates the appearance of microcracks on the surface of the PP-pine biocomposite. Overall, the study provides valuable data for understanding the UV degradation phenomenon in biocomposites and highlights the influence of fibre composition on material performance.

Autonomous vehicle technology, employing image sensors for road marking recognition, is largely dependent on the Lane Departure Warning System (LDWS) to prevent vehicular deviations from driving lanes. The effectiveness of image-based lane recognition, however, is susceptible to environmental influences like weather conditions and the surrounding road environment. This study investigates the impact of road marking retro-reflectivity on LDWS under varied environmental conditions. Conducted at the Yeoncheon SOC Demonstration Research Center, the experiments encompassed a spectrum of weather scenarios, incorporating rainfall and shifts between day and night lighting. Controlled wear was applied to white, yellow, and blue road markings, followed by measuring their retro-reflectivity at different stages of degradation. The LDWS's performance was evaluated by assessing the recognition rates of these markings under these diverse environmental settings. The study reveals that enhanced retro-reflectivity significantly boosts LDWS detection, especially in challenging weather conditions. Furthermore, the research led to the development of a simulation framework to analyze the cost-effectiveness of road marking maintenance, aligning it with the safety needs of autonomous vehicles. This framework suggests the necessity for updated road marking guidelines that cater to the advanced needs of driver assistance systems and autonomous vehicle technology.

Safe water is a global public health concern amid increasing scarcity and pollution. Bottled water production and consumption contribute to these problems. This study examines tap water consumption in Italy, assessing associated sociodemographic factors and related health outcomes such as obesity and self-perceived health status. Data from the Italian National Statistics Institute's "Aspects of daily life" survey (N=45,597) were analyzed. Covariates included education, age, gender, economic status, region, concerns about waste and climate change, consumption of carbonated drinks excluding water, alcohol consumption, consumption of vegetables, consumption of snacks, body mass index, and self-perceived health status. Bivariate analyses and mixed-effect logistic regression models explored the associations. People who drink tap water were 19,674 with a higher prevalence in people aged 45 to 59 old, people with a graduate/post-graduate degree diploma, with optimal economic resources, and concerned about waste production and climate change, coming from the North-East regions of Italy. Underweight people showed a higher prevalence of TW assumption as well as those who drink less than occasionally carbonated drinks, drink alcohol, consume vegetables more than once a day, and snacks less than once a week with a satisfying level perceived health status. Regressions showed that all age classes are less likely to drink tap water than people younger than 20 years old. The category with “inadequate” economic resources is more likely to consume tap water. Low educational classes show a low likelihood of consuming tap water as well as Islands. A concern about waste production and climate change is associated with an increased likelihood of assuming tap water. Tap water consumption was negatively associate with obesity but not with a satisfactory Self-perceived health status. Insights from this study can inform public health strategies.

Anthropogenic development can strongly influence natural river processes, leading to environmental changes that negatively affect important habitats and biodiversity, and consequently reduce economically important natural resources. This study investigated the effects of salinity intrusion on the habitat of the clam Corbicula japonica in the Seomjin River estuarine zone. We employed the Environmental Fluid Dynamics Code (EFDC) model, which incorporates topographic data and hydrological changes, to simulate salinity concentrations. Two salinity measurement facilities were installed in Seomjin River estuarine and operated to optimize the EFDC model. The results show that reduced flow rates due to intake have a negligible impact on the increased salinity. Maintaining optimal salinity (15–20 psu) during neap tides at the Seomjin River Bridge requires constant high flow rates, which poses significant challenges. Saltwater stratification is identified as the primary cause of pronounced salinity stratification, particularly during neap tides. Addressing this issue through river discharge and intake facility operation is challenging. Structural measures, including riverbed restoration and underwater barriers, are recommended to improve resistance to seawater intrusion. Future research should aim to develop scenarios to reduce salinity concentrations, quantify the reduction efficiency, and propose region-specific measures.

In the context of precision agriculture (PA), geomatic surveys exploiting UAV platforms allow the trees’ dimensional characterization and crown identification. This paper focuses on the use of low-cost UAV photogrammetry to estimate the trees’ height, as part of a project for the phytoremediation of contaminated soils. Two study areas (Area 1; Area 2) have been chosen, having different characteristics in terms of mean trees’ height (5 m; 0.7 m), to test the procedure even in a challenging context. Three campaigns have been performed in Area 1 at different altitudes (30 m, 40 m, 50 m), and one UAV flight is available in Area 2 (42 m of altitude). The implemented workflow involves the elaboration of the UAV point clouds and DSMs using the standard SfM approach, the vegetation filtering, the generation of the DTM and a GIS-based analysis to obtain the CHMs for the extraction of the trees’ heights based on a local maxima approach. UAV-derived heights have been compared with in-field measurements obtaining promising results in Area 1, confirming the applicability of the procedure for trees’ height extraction, while the application in the context of low trees was more problematic.

Mozambique is one of the poorest countries of the world. However, it has natural resources and if they are managed under sustainable development principles, Mozambique can overcome the current problems. In the present socio-economic status, soil is one of its most important resources and must be protected from pollution and from degradation. This review focuses on the identification and discussion of the main soil quality stressors, namely: soil fertility; deforestation and its sources: agriculture, timber harvesting, charcoal production and uncontrolled fires; mining activities, manly gold artisanal explorations and industrial open-pit coal mining. The sustainable use of the natural resources is mandatory to allow future generations to continue profiting for this nature-based wealth.

This research delves into the integration of green roofs with Building Information Modeling (BIM), a pivotal advancement in sustainable urban construction. Aligning with the United Nations Sustainable Development Goals, particularly Goal 11, the study explores how this integration can address global challenges like climate change and resource depletion. Using the Dynamo Visual Programming Language within Autodesk Revit, the research develops a computational modeling approach for green roofs, focusing on their thermal and structural characteristics under varied environmental conditions. Key findings demonstrate the significant influence of substrate and drainage material combinations on green roofs’ thermal performance, highlighting the need for tailored designs based on climatic conditions. The study also emphasizes the importance of considering structural performance in both dry and saturated conditions for overall building integrity. The research identifies gaps in current practices, such as limited focus on specific green roof materials and reliance on certain software tools, suggesting the need for broader material selection and software adaptability. Future research directions include expanding material selections, exploring diverse environmental conditions, and integrating green roofs with various BIM software platforms. The study's implications extend to stakeholders in the construction industry, offering a framework for architects, urban planners, and policymakers to design and implement green roofs aligned with environmental goals. This work contributes to the field by proposing a novel approach to sustainable construction, integrating ecological design with digital technology, and setting a new benchmark in the integration of green roofs with BIM. By addressing these aspects, the research paves the way for future developments in sustainable urban construction, enhancing the efficiency, sustainability, and resilience of urban communities in line with global sustainability objectives.

Background: There is considerable evidence to support the association between environmental tobacco smoke (ETS) exposure and children’s burden of disease. However, literature on the health outcomes of prenatal ETS exposure among Chinese children has not yet been comprehensively reviewed. Objective: This systematic scoping review examines the currently available evidence and identifies gaps for further research on the health consequences of prenatal ETS exposure among Chinese children. Methods: Following the JBI scoping review methodological framework, we conducted a computer-aid search of three electronic databases-- PubMed, EBSCOhost, and ProQuest to include studies from January 2011 to May 2023 that addressed the health outcomes of Chinese children whose mothers were exposed to ETS at any stage of the pregnancy. Further, a methodological quality assessment of the selected articles was conducted, using JBI Critical Appraisal Checklists. Results: A total of 30 articles were reviewed, including eleven high-quality studies and nineteen moderate-quality studies. Five main themes, including hypertension, foetal and children’s development, behavioural disorders, respiratory outcomes, and other health outcomes. Majority of studies showed positive link between prenatal ETS exposure and increase risk of preterm birth, and moderately, foetal growth restriction. Few studies explored other potential adverse outcome of ETS, including hypertension, respiratory morbidity, lung function and asthma in their children. Conclusion: The current available evidence on prenatal ETS exposure in Chinese children has unveiled a wide range of health outcomes, including preterm birth, foetal development, behavioural disorders and much more. However, Chinese studies in this area are still lacking and a gap still exists in relation to the strength of association between prenatal ETS exposure and some health risks. Efficient anti-smoking policies and smoking cessation programs should be developed to promote maternal and child health. Further research is also needed to provide better evidence in this field.

Fish tissue samples from 203 adult individuals were collected in the main ports and markets of the Pacific coast of Panama. Molecular identification based on cytochrome oxidase I gene segment of all species was verified GENBANK reference sequences. 34 species from 14 families (Ariidae, Lutjanidae, Caranjidae, Scianidae, Centropomidae, Serranidae, Scombridae, Sphyraenidae, Haemulidae, Gerreidae, Stromotidae, Lobotidae, Malacanthidae, Mugilidae) were identified at species molecular level from 164 sequences. Also, three Caribbean species were molecularly identified among the analyzed samples (Mycteroperca xenarcha, Paralonchurus brasilensis and Lobotes surinamensis). Species diversity was slightly higher in the Gulf of Panama than in the Gulf of Chiriquí. For species with 5 or more individual sequences, genetic diversity and genetic connectivity parameters such as: total number of haplotypes (H), haplotype diversity (Hd), and nucleotide diversity (π) were calculated. Overall, pelagic-migratory species showed higher values of genetic diversity than coastal and estuarine species with some exceptions. Connectivity between Gulf areas was compared using values of genetic distances and genetic differentiation (Fst). High level of connectivity observed between Gulf of Chiriqui and Gulf of Montijo indicates the existence of a single stock in that area for the following species: Scomberomorus sierra, Caranx caninus and Lutjanus guttatus. Demographic history of the most common species was examined using Tajima’s D values suggesting population expansion for two snapper species, L. peru and L. argentiventris, having significant and higher values. Another important contribution from this research was the production of primers and dual labeled probes for environmental DNA detection using qPCR for the five most abundant species (spotted rose snapper, yellow snapper, green jack, Pacific crevalle jack and the Pacific sierra fish). These markers represent a new set of tools for environmental DNA (eDNA) detection and molecular traceability of three commercially important fish species along the supply chain including landing sites and markets of the main fishery areas.

Solar energy is a renewable and sustainable source of energy, and it has been used in addition of specified technologies, such as solar cooling. The demand for cooling continues to increase in line with environmental changes and a greater desire for human comfort. This study primarily aimed to analyze the performance of an evaporative cooling system powered by solar energy and assess the economic and environmental impact of this system. In this system, hot, dry incoming air is used to evaporate water, thus transforming part of its sensitive heat into latent heat without any variation in enthalpy or total heat. The outputted air then has a lower temperature and a greater humidity, thus providing a more comfortable, healthier environment for its users. To achieve this study’s objectives, numerical code was developed and implemented in MATLAB. The obtained results reveal that the efficiency of the evaporative cooler exceeds 90%, with maximum efficiency being reached at a high wet-bulb depression, while minimum efficiency was observed when the dry air has a high relative humidity and a low dry-bulb temperature.

Volunteer scuba divers have become indispensable stakeholders in marine environmental protection, as their educational knowledge and environmental awareness create environmentally responsible attitudes and behaviors, which are the key elements to promote the sustainable development of marine environments. This study used the C-A-B model to examine the relationship between environmental knowledge, environmental sensitivity, destination social responsibility, and environmentally responsible behaviors of volunteer scuba divers. It also explored the mediating effects of destination social responsibility and first-time and repeat volunteers. In order to achieve the research purpose, this study adopted quantitative research to verify the research structure, proposed the hypotheses and prepared a questionnaire with reference to relevant previous studies. A total of 238 Taiwan marine volunteer scuba divers were selected as the subjects by intentional sampling, and the effective questionnaire recovery rate is 92.9%. Structural equation was used to verify the model of environmentally responsible behaviors of volunteer scuba divers, as based on the C-A-B model. This study found that environmental knowledge had a significant impact on destination social responsibility, and destination social responsibility had a significant impact on environmentally responsible behaviors. Destination social responsibility also had the effect of complete mediation on the model. In addition, the first-time and repeat volunteers had a significant mediating effect on the causal relationship between environmental knowledge and environmentally responsible behaviors, as well as between environmental sensitivity and environmentally responsible behaviors. The explanatory power of the overall model on the environmentally responsible behaviors of volunteer scuba divers is 69.0%, and their knowledge, sense of responsibility, experience, and level of involvement can be regarded as the determinants of their environmentally responsible behaviors.

In recent years, more and more attention has been paid to the behavior of tourists and their intention to travel after certain natural disasters or social unrest. The aim of the research was to establish the influence of psychological profiles of tourists on their decision to choose a tourist destination, using three psychographic techniques BFI-10 (Big Five Inventory), AIO (Activities, Interests, Opinions), and VALS 2 (Values and lifestyle), and a freely determined six-level scale of risk and tourist attractiveness of the imagined destinations. By analyzing the results through structural modeling-path analysis, it was determined that almost all psychographic orientations derived from lifestyles negatively perceive destinations with a high degree of risk and attractiveness, while with the VALS 2 technique, only members of the action orientation tend to accept the risk and challenge of visiting high-risk destinations. The results of the research have a degree of innovation in the application of the combination of the mentioned models, as well as in the theoretical and applied aspects in supplementing the building and strategic planning of the future business.

Rhodovulum spp. are anoxygenic photosynthetic purple bacteria with versatile metabolisms, including the ability to obtain electrons from minerals in their environment to drive photosynthesis, a relatively novel process called phototrophic extracellular electron uptake (pEEU). Recently, our group isolated 15 strains of R. sulfidophilum to observe this metabolism in marine phototrophs. Our group previously observed carbon dioxide fixation coupled to phototrophic iron oxidation (photoferrotrophy) and pEEU in AB26 and identified a novel di-heme c¬-type cytochrome EeuP important for pEEU but not photoferrotrophy. Taxonomic re-evaluation based on 16S and pufM phylogenetic analyses led us to re-classify two isolates, AB26 and AB19, as Rhodovulum visakhapatnamense. The AB26 genome consists of 4,380,746 base-pairs, including two plasmids, and encodes 4,296 predicted protein-coding genes. AB26 contains 22 histidine kinases, 20 response regulators, and dedicates ~16% of its genome to transport. Transcriptomic data under aerobic, photoheterotrophy, photoautotrophy, and pEEU reveals how gene expression varies between metabolisms. Lastly, we use transcriptomic data for a comparative genomic analysis of potential pEEU-relevant genes between all 15 isolates. With these data we identify potential pEEU capable phototrophs within these isolates, and likely molecular mechanisms of pEEU.

This paper presents the results of an experimental study of the patterns of steel and lead shot transformation under the impact of environmental factors (two types of shot exposed alone and in combination with each other). The analyzed environmental factors include atmospheric precipitation of various acidity and soil solutions with a higher content of organic acids. This research demonstrated that steel shot is characterized by a high transformation rate that is an order of magnitude higher on average than the transformation rate of lead under the same conditions. The prevalence of the suspended iron form (excluding the interaction with organic acids) presents risks for such environmental components as soils and sediments and may be hazardous to the ambient air and natural waters in case of wind erosion and surface runoff from the catchment area. Furthermore, the joint presence of steel and lead shot mutually accelerates the corrosion of both metals, thus increasing the environmental risks.

There is an increasing pressure by community and customers forcing companies to insert environmental concerns in their practices. To help companies initiatives, the green bonds market was incepted. Our research question is how to select bonds in a growing billion-dollar market. This paper presents a multi-criteria decision analysis (MCDA) model to enable investors identify opportunities based not only in opinions, but grounded on objective facts. Analytic Hierarchy Process (AHP) and Complex Proportional Assessment (COPRAS) are two MCDA methods applied in this paper. Top-fifteen green bonds ranked by specialized media were assessed with the proposed MCDA model. Criteria included the Environmental Performance Index (EPI) proposed by Yale University, and common financial indicators as assets, risks (β), and dividends. The new AHP–COPRAS rank is compared with another published by specialized media.

Alzheimer’s disease (AD) is one of the most prevailing neurodegenerative diseases, characterized by memory dysfunction and the presence of hyperphosphorylated tau and amyloid β (Aβ) aggregate in multiple brain regions, including the hippocampus and cortex. The exact etiology of AD has not yet been confirmed. However, epidemiological reports suggest that populations who were exposed to environmental hazards are more likely to develop AD than those who were not. Arsenic (As) is a naturally occurring environmental risk factor abundant in the Earth’s crust and human exposure to As predominantly occurs through drinking water. Convincing evidence suggests that As causes neurotoxicity and impairs memory and cognition although the hypothesis and molecular mechanism of As-associated pathobiology in AD are not clear yet. However, exposure to As and its metabolites leads to various pathogenic events such as oxidative stress, inflammation, mitochondrial dysfunctions, ER stress, apoptosis, impaired protein homeostasis, and abnormal calcium signaling. Evidence has indicated that As exposure induces alterations that coincide with most of the biochemical, pathological, and clinical developments of AD. Here, we overview existing literature to gain insights into the plausible mechanisms that underlie As-induced neurotoxicity and the subsequent neurological deficits in AD. Prospective strategies for the prevention and management of arsenic exposure and neurotoxicity have also been discussed.

China is in the climbing phase of the "Inverted U" environmental Kuznets curve, from excessive environmental consumption to the development stage of governance and protection, and green innovation. It is the most complex period of environmental quality. Environmental and policy regulation are very important. Select panel data of 29 provinces of China (excluding Hong Kong, Macau, Taiwan, Hainan and Tibet) from 2008 to 2017, construct a nonlinear two-threshold regression model, empirically analyse the impact of environmental tax and government innovation subsidies to green processes innovation, and attempt to explore whether the implementation of these two policies at the same time can make enterprises more inclined to green process innovation and whether there is an optimal space for policy implementation. It is proposed that the synergy effect of environmental tax and government innovation subsidy policies on enterprise green process innovation should be fully utilized, and the enterprise green process innovation environment and incentive mechanism should be improved to promote the green transformation and sustainable development of enterprises.

The paper addresses an analysis of the efficiency and profitability of the operation of a photovoltaic installation located in the geometric centre of Europe (near Białystok, Poland), where the intensity of solar irradiation is not too high compared to other European countries. It is calculated that in that place average solar irradiation being lower even by approx. 26 kWh than that for the whole Europe, which results in a 26% drop in the economic potential of the utilisation of solar energy for its conversion. A case study and an economic analysis show that without minimum funding amounting to 50% of the investment costs paid for the modernisation of a central heating system assisted by PV cells, the time of return of pecuniary expenditures exceeds 7 years. Apart from the Simple Pay-Back Time SPBT, discount indicators determined in the paper also include the net present value NPV and the internal rate of return IRR. Moreover, a direct ecological effect has been determined for such an investment.

COVID-19, previously known as “2019 novel coronavirus”, is a newly discovered virus which causes severe acute respiratory syndrome, similar to corona virus 2 (SARS-CoV-2), which has spread widely through human to human contact and was declared a pandemic by the WHO in March 2020. To cope with this pandemic many countries have adopted nationwide lockdowns which restrict nonessential activities and encourage their populations to avoid public transport, work from hone wherever possible, and to maintain social distancing at all times. While the severity of these shutdowns has varied with country, large geographic regions of the world (including China, India, Iran, Italy, Spain, and the USA) have all been severely affected, not just in the loss of human life, but also in terms of the financial impacts the lockdowns will have on their countries future prosperityIt was previously reported that a number of environmental factors, including humidity and temperature, played an important role in development and spread of the SARS-Corona Virus infection with the virus retaining viability for over 5 days at temperatures between 22–25^oC and relative humidity (RH) of 40–50%. Whereas, elevated temperatures and higher RH (38^oC, and >95% RH) decreased virus viability (Kroumpouzos et al., 2020). The spread of COVID-19 started in low temperature areas of China, with major outbreaks subsequently occurring in Iran, Japan, Northern Italy and South Korea. These new virus epicenters all had similar temperature and latitude, along the 30-50^◦N” zone. Subsequently, the virus was spread to regions of elevated temperature, such as India, the Middle East and Thailand, due to international travel (Kroumpouzos et al., 2020).The aim of this study was to consider the environmental impact of COVID-19, including water pollution. The paper is divided into four sections. In the first section the current literature related to COVID-19 is reviewed. In the second section a recent update on COVID-19 globally is presented, followed by a descriptive impact on the environment in the third section and finally in the fourth section the COVID-19 related worldwide environmental impact is discussed. Since COVID-19 is a currently an active pandemic with no end in sight, while constructive conclusions can only be made on the limited data currently, which may be prone to high errors. However, these conclusions may provide some preliminary suggestions for assisting in assessing spreading patterns of COVID-19 across the globe, and may be of long-term significances with respect to assessing the environmental impact of lockdown policies due to COVID-19 worldwide.

The physical environment plays an important role in the transmission of respiratory infections like Covid-19. To find relevant articles on environmental factors influencing respiratory infection outbreaks, we searched Pub med Central on the following topics: 1. Environmental pollution causing coronavirus fatality- 73 results, relevant 1 article, 2. Environmental factors affecting Covid-19, 149 results from which there were 6 relevant articles, 3. Impact of air pollution on Covid-19 fatality, 10 results, relevant 3 articles, 4. Environmental factors affecting respiratory viruses- 10646 results were obtained, 2 relevant articles. We searched Google scholar on environmental factors affecting Covid-19 transmission and found 7 relevant papers. We excluded the duplicates in each of the key words search. Date of search was on 20^th April 2020. All articles included in results were scrutinized and relevance of articles was based on their content that discussed meteorological and physical environment factors in the spread and severity of Covid-19. We have discussed factors like air pollution, smoking, air temperature, humidity and air velocity as contributing factors. If meteorological factors are conducive to spread in a particular area, we need protective measures way before a respiratory infection outbreak occurs. Covid-19 is a lesson learnt the hard way, and we must enable people to practice hygienic practices with limited resources but high level of protection that it provides. Air pollution control can prevent priming of respiratory system which shall further protect from pulmonary infections.

It is important for enterprises to decide their environmental policies after carefully examining their future paths based on the relationship between the environment and the economy. This study focused on Japanese minimum administrative divisions (municipalities) and attempted to quantify the annual environmental efficiency of production activities within each division according to the theory of life-cycle impact assessment (LCIA). This study leverages the assessment theory LIME2, which is an endpoint-type LCIA method developed in 2010 that integrates environmental loads for certain impact categories, such as global warming and land use into a simple indicator by monetary unit. First, annual environmental impact assessments were conducted for all Japanese municipalities based on statistical information that was reliable, verifiable, and comparable. Next, the environmental efficiency of productivity for each division was conceptualized by dividing the gross domestic product by the environmental damage amounts as calculated above. Assessment results for each municipality were placed on a map of Japan in order to visualize the regionality of each indicator. The findings revealed in this study will aid public administrators in their decision-making process with respect to environmental policies.

Consideration of climate change in Environmental Impact Assessment (EIA) is a rather novel topic, which became partly mandatory through the revised EU Directive on EIA. Through a mixed-methods approach involving key-actors from EIA practice, decision making and climate adaptation planning, this study presents a transdisciplinary point of view on barriers and opportunities to tackle climate change adaptation in environmental assessment of large-scale projects. It is based on both a retrospective ex-post evaluation of existing practices in Austria and Germany as well as prescriptive examination and development of outcomes for practice through the development of a climate-fit toolkit that supports the incorporation of climate change impacts into EIAs. The scenario analysis applied with a back casting approach provided the opportunity to look beyond limitations related to legal compliance and partly lack of data identified by previous research. Three scenario narratives were elaborated based on nine key impact factors based on literature review, content analysis of EIA documents and interviews with EIA actors. The groups of actors carried out a prioritization of actions towards consideration of climate change in EIA. Finally, the actors were involved in co-production of an online tool-kit for Austrian and German EIA practice.

Conservation of natural habitats in human-dominated landscapes is critical for halting biodiversity loss. Maintaining habitat quantity and connectivity requires landscape-level collective action, which results from environmental decisions made by individual land owners. We investigate how individual decision making in a rural collective translates into quantitative differences in landscape-level environmental outcomes. Behavioral science has become a critical domain of knowledge in conservation, but little attention has been paid to how multiple behavioral drivers determine the success of collective environmental action. We developed a social-ecological model for landscape-level conservation using a detailed data set of 600 land owners in New Zealand. With the model, we tested whether the effect of social influence networks on collective conservation action was altered by their interplay with land owners’ personal characteristics, connections to cross-scale actors and local environmental contexts. Interactions between multiple behavioral drivers determined the environmental outcomes of collective action in unexpected ways by modifying, muting or amplifying the effects of single drivers. Importantly, we detected a social-ecological mechanism for rapid change in the extent of protected habitats, which can explain highly successful or failed environmental outcomes of collective conservation. Further, when environmentally desirable and undesirable behaviors spread simultaneously through the social network, homophily and network cohesion hinder desirable environmental outcomes. This effect can be modified by other drivers such as social responses to local environmental change. Thus, understanding how the antagonistic and synergistic effects of behavioral drivers can be best utilized in conservation will benefit biodiversity and ensure benefits that humans obtain from biodiversity.

Contemporary architects and the construction industry are trying to cope with increasing requirements concerning energy efficiency and environmental impact. One of the available options is the active utilization of energy gains from the environment, specifically solar energy gains. These gains can be utilized by, for example, solar walls and facades. The solar façade concept has been under development for more than a century. However, it hasn’t achieved widespread use for various reasons. Rather recently the concept was enhanced by the application of transparent insulation materials that have the potential to increase the efficiency of such façades. The presented study evaluates the environmental efficiency of 10 solar façade assemblies in the mild climate of the Czech Republic, Central Europe. The evaluated façade assemblies combine the principles of a solar wall with transparent insulation based on honeycomb and polycarbonate panels. The study applies Life-Cycle Assessment methodology to the calculation of environmental impacts related to the life cycle of the evaluated assemblies. The results indicate that even though there are several limiting factors, façade assemblies with transparent insulation have lower environmental impacts compared to a reference assembly with standard thermal insulation. The highest achieved difference is approx. 84% (in favour of the assembly with transparent insulation) during a modelled 50-year façade assembly service life.

The ongoing growth of international occurrence of depression and its ability to co-occur with other serious medical disorders such as heart disease, cancer, diabetes, and Parkinson’s disease is a current public health problem. Inhibitor of DNA-Binding/Differentiation (ID) proteins are part of a group of transcriptional factors that have been seen to be involved in neurocognitive disorders and therefore, may have influence on depressive disorders. Previously, it has been established that environmental estrogenic endocrine disruptors (EEDs) such as polychlorinated biphenyls (PCBs) & bisphenol A (BPA) have played an important role in the impact of depressive disorders. Hence, based on many studies, we consider the impact of these environmental pollutants on the group of ID proteins. Improved understanding of how the interaction of ID proteins by EED exposure can influence depressive disorders will contribute essential evidence that can further benefit our public health community with innovative knowledge to prevent these types of mental illnesses.

Human-generated, natural occurrences and other actions connected with the petroleum industry have contributed expansively to the contamination of numerous areas of human habitant, thus effecting overwhelming challenges and constraints to sustainable human health, development and the biosphere. The sites commonly associated include derelict pits, hydrocarbon onshore release sites, and places to where oil slicks exuding from offshore releases are blown onshore. In diverse cases, remediation is pertinent to restore the affected ambient. This is required despite the complexity and intricate pore structure and fluid trafficking trajectories of soil which are not easily amenable to remediation. Due to the complex assemblage of contaminated soil, it is necessary to conduct an encompassing site assessment by considering the potential impact of the environment and human health prior to proper selecting and implementing of a desirable remediation process. There are extant remediation methodologies which are effective and efficient for the clean up of contaminated shorelines and other petroleum-contaminated sites involving inter alia agricultural activities. There are salient variations in the techniques to expunge contaminants regarding spatiotemporal and pecuniary costs or considerations due to the gross environmental hazards entailed. This study provides for the opportunity to harness and sustain the capacity for the mitigation of untoward impacts, and induce the latitude for an enabling condition in sustainable human health, environment and development in the petroleum industry and other anthropogenic activities.

This study aimed to evaluate the relationship between various asbestos exposure routes and asbestos-related disorders (ARDs). The study population comprised 11,186 residents of a metropolitan city who lived near asbestos factories, shipyards, or in slate roof-dense areas. ARDs were defined from chest X-rays indicating lower lung fibrosis (LFF), pleural disease (PD), and lung masses (LMs). Of the subjects, 11.2%, 10.4%, 67.2% and 8.3% were exposed to asbestos via occupational, household, neighborhood, and slate roof routes, respectively. Regarding adjusted confounders and other exposure routes, the odds ratio (OR) of PD from household exposure (i.e., living with asbestos-producing workers) was 1.9 (95% confidence interval: 0.9–4.2), and that of LLF and PD from neighborhood exposure, or residing near asbestos factories) for <19 or >20 years, or near a mine, were 4.1 (2.8–5.8) and 4.8 (3.4–6.7), 8.3 (5.5–12.3) and 8.0 (5.5–11.6), and 4.8 (2.7–8.5) and 9.0 (5.6–14.4), respectively. The ORs of LLF, PD, and LM among those residing in slate-dense areas were 5.5 (3.3–9.0), 8.8 (5.6–13.8), and 20.5 (10.4–40.4), respectively. Substantial proportions of citizens residing in industrialized city have potentially been exposed to asbestos, and various exposure routes are associated with the development of ARDs. Notably, this may be the first finding of the health effects of slate roof exposure. However, given the limitations of this study, including potential confounders such as socioeconomic status, further research is needed.

The move towards a new Circular Economy (CE) economic model has been advocated and supported in Portugal, however, there is limited research on this topic. To address this gap, a quantitative research based on an online survey was carried out among 99 Portuguese organizations, encompassing a wide range of sectors and sizes. The results show that CE is regarded as a strategic and relevant issue for profitability and value creation. Furthermore, the perception that it requires the adoption of new business models in addition to the classical “reduce, reuse, and recycle” approach is growing. Moreover, based on the hypotheses raised, results suggest that the level of CE adoption is positively impacted by the status of the EMS (Environmental Management System) certification and the willingness to improve the environmental performance and achieve a sustainable business model. However, CE activities are still relatively modest and a friendlier context (fiscal, legal, organizational, etc.) and the stronger support from supply chain agents and consumers are required. Future research should focus on how to design and shape the transition from a linear to a CE economy, and to ascertain if the positive attitude towards CE is materialized in changing the way business is done.

We tested the use of mosquito traps as an alternative to insecticide spraying in Camargue (France) following the significant impacts observed on the non-target fauna through Bti persistence and trophic perturbations. In a village of 600 inhabitants, 16 Techno-Bam traps emitting CO₂ and using octenol lures were set from April to November 2016. Trap performance was estimated at 70% overall based on mosquito landing on human baits in areas with and without traps. Reduction of Ochlerotatus caspius and Oc. detritus, the two species targeted by Bti spraying, was respectively 74 and 98%. Traps were less efficient against Anopheles hyrcanus (46%), which was more attracted by lactic-acid than octenol lures based on previous tests. Nearly 300 000 mosquitoes from nine species were captured, with large variations among traps, emphasizing that trap performance is also influenced by surrounding factors. Environmental impact, based on the proportion of non-target insects captured, was mostly limited to small chironomids attracted by street lights. Breeding success of a house martin colony was not significantly affected by trap use, in contrast to Bti spraying. Our experiment confirms that deployment of mosquito traps can offer a cost-effective alternative to Bti spraying for protecting local populations from mosquito nuisance in sensitive natural areas.

The conserved cyanobacterial protein PipX is part of a complex interaction network with regulators involved in essential processes that include metabolic homeostasis or ribosome assembly. Because PipX interactions depend on the relative levels of their different partners and of the effector molecules binding to them, in vivo studies are required to understand the physiological significance and contribution of environmental factors to regulation of PipX complexes. Here we have used the NanoBiT complementation system to analyse regulation of complex formation in Synechococcus elongatus between PipX and each of its two best characterized partners, PII and NtcA. Our results confirm previous in vitro analysis on regulation of PipX-PII and PipX-NtcA complexes by 2-oxoglutarate and on regulation of PipX-PII by the ATP/ADP ratio, showing the disruption of PipX-NtcA complexes by increased levels of ADP-bound PII in Synechococcus elongatus. The demonstration of a positive role of PII on PipX-NtcA complexes under the initial response to nitrogen starvation or the impact of a PipX point mutation on the activity of PipX-PII and PipX-NtcA reporters are further indications of the sensitivity of the system. This study reveals additional regulatory complexities in the PipX interaction network, opening the way to future research in cyanobacteria.

A total of 281 guano samples were collected from caves (N = 181) in 8 European countries (Bulgaria, Czech Republic, France, Hungary, Italy, Romania, Slovakia and Slovenia) and attics in the Czech R. (N = 100). The correlation of detection of mycobacteria between Ziehl-Neelsen (ZN) microscopy and culture examination and qPCR was strong. ZN microscopy was positive in guano from caves (58.6%) more than double than positivity in guano from attics (21.0%; P &lt;0.01). From 89 mycobacterial isolates (73 isolates from cave guano and 16 isolates from attics’ guano) 68 (76.4%) isolates of 19 sp., ssp. and complex were identified as members of 3 Groups (M. fortuitum, M. chelonae, and M. mucogenicum), and 4 Complexes (M. avium, M. terrae, M. vaccae, and M. smegmatis). A total of 20 isolates (22,5%) belonged to risk group 1 (environmental saprophytes), 48 isolates (53.9%) belonged to risk group 2 (potential pathogens), and none of isolates belonged to risk group 3 (obligatory pathogens). When comparing bat guano collected from caves and attics, differences (P&lt;0.01; Mann-Whitney test) were observed for the electrical conductivity, total carbon, total organic and total inorganic carbon. None difference (P&gt; 0.05; Mann-Whitney test) was found for pH and oxidation-reduction potential parameters.

In Nitrate Vulnerable Zones (NVZ) site-specific techniques are needed to match N availability with durum wheat (Triticum turgidum subsp. durum Desf.) requirements. Enhanced-efficiency fertilizers (EEF) can improve efficient N supply and reduce leaching, thus contributing to sustainable agriculture. To study the effects of rates, sources and timings of nitrogen application, two-year field experiments were carried out at two Mediterranean NVZs of Central Italy (Pisa and Arezzo). The trial compared: i) two N rates: one based on the crop N requirements (NO), the other on the Action Programmes’ prescriptions of the two NVZ (NAP); ii) three N sources (urea, methylene urea (MU), and nitrification inhibitor (NI) 3,4-Dimethylpyrazole phosphate (DMPP); and two top-dressing timings (1st tiller visible and 1st node detectable). Grain yield and yield components were determined, together with N uptake. Results showed that: i) grain and biomass production were reduced with NAP at both locations; ii) urea performed better than slow-release fertilizers; iii) the best application time varied depending on N source and location: at Pisa enhanced-efficiency fertilizers achieved higher yields when applied earliest, while for urea the contrary was true; at Arezzo different N fertilizers showed similar performances between the two application timings. Different behaviors of top-dressing fertilizers at the two localities could be related to the diverse patterns of temperatures and rainfall. Therefore, optimal fertilization strategies vary according to environmental conditions.

Climate changes challenges people’s life and sustainability. Environmental problems seem to derive from human behavior. Dentistry has a high environmental footprint that needs to be controlled worldwide. Thus, the change of behavior of dentists is a necessary condition to improve the environmental situation. In this study we use a system dynamics approach to analyze pro-environmental behavior in dentists. Systemic modelling in this case, allow us to make a clear prediction of how the population of non-eco dentists will change in the future if certain factors will be affected and how much time will be needed by the system of a group of dental professionals to become eco- dentists. The ECODENT model was designed with Vensim software. It was based on the influence of WOM (word of mouth) spread of information among colleagues and stakeholders (e.g. patients, auxiliary staff and community) and other factors such as dental income, state support, CaPex and OpEx, education hours, level of urbanization and time to react. By changing each one of them we can observe the changes in the groups of non-eco and eco dentists as well as the flow of the phenomenon. It is tested that by augmenting WOM parameter, state economic support or education hours, while diminishing CaPex and OpEx, changes in pro-environmental behaviors of dentist will be reported in a shorter time. The ECODENT model can be used to further study pro-environmentalism in different dental groups and associations and design relevant eco-friendly educational programs.

This study presents a methodology to reveal traces of viral particles, as aerosol with known chemical and molecular structure, in a sample by means of photon and electron interactions. The method is based on Monte Carlo simulations and on the analysis of photon-electron fluxes-spectra through energy channels counts as a function of different aerosol viral concentrations in the air sample and looking at the peculiar photon/electron interactions with the potential abnormal atomic hydrogen (H), oxygen (O), carbon (C), and phosphorus (P) compositions present in the air sample as a function of living and nonliving matter with PO4 group RNA/DNA strands in a cluster configuration.

The purpose of this paper is to explore the effect of corporate social responsibility (CSR) on brand image in the apparel industry in Jordan, using the moderating variable of customer consciousness. The current research uses a quantitative, descriptive, cause-effect, and cross-sectional approach, and also it uses a convenience sampling method. Data was collected from 440 respondents. Results indicate that Jordanian Apparel organizations have medium to highly implementing of all items and constructs of CSR, brand image items, and consciousness items. Moreover, there is a strong relationship between CSR dimensions, a medium relationship be-tween each CSR dimension and brand image, a medium relationship between each CSR dimension and consciousness, a medium relationship between total CSR and brand image, a medium relationship between total CSR and consciousness, and the medium relationship between brand image and consciousness. Results of the first model show that total CSR affects the brand image. Where social responsibility has the highest positive effect, followed by ethical responsibility, then economic responsibility, however, environmental responsibility negatively affects the brand image. The second model shows consciousness moderates the effect of CSR on the brand image. The study recommends longitudinal research on the Jordanian Apparel industry, especially to test the effect of environmental responsibility on the brand image. Moreover, the re-search uses customers’ consciousness as a moderating variable, which improves the effect of CSR on brand image. The Apparel industry organizations in Jordan should revise their daily practices particularly environmental responsibility and/or increase their customers’ awareness of their practices. Finally, the current research contributes to existing studies by using consciousness as a moderating variable.

In this paper, a distinction is first made between environmental, sustainable and green chemistry; the last two are then examined in relation to the more general problem of the environmental education. A brief historical digression on the STS (Science, Technology and Society) movement tries to dissect the reasons why chemistry is seen by the general public as a problem, not as a decisive resource for the realization of the ecological transition. Although sustainable and green chemistry can be decisive in overcoming the insularity of chemical disciplines in the high school, it fails to effectively embed itself in educational practices. Specific operational goals, supporting a real scientifical and technological literacy in sustainable and green chemistry, can help chemical educators. They are provided at the end of an examination of the founding axes of sustainable and green chemistry, according to the criteria of scientific and technological literacy.

Recent increases in the demand for automotive lithium-ion batteries (LIBs) have led to higher needs for critical materials like lithium, cobalt, nickel, and graphite. Consequently, recovering materials from spent batteries has gained importance. This study aimed to (1) develop a mechanical pre-treatment method for separating and concentrating materials from spent NCM622 cells, and (2) evaluate the economic, environmental, and scarcity potentials of these fractions. The pre-treatment involved grinding and granulometric separation, producing six particle-size fractions. Analysis showed that the finest fraction (n < 0.5 mm) had 85% of lithium, 77.4% of cobalt, 75.1% of manganese, and 68.5% of nickel. This fraction represented 40.4% of the processed mass and had the highest economic value (USD 3,669/ton NCM cell). This fraction was also prioritized for recycling due to its superior environmental and scarcity considerations.

Microplastics, pervasive in both terrestrial and aquatic ecosystems, have emerged as significant contributors to greenhouse gas (GHG) emissions, including carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O). This review synthesizes recent studies from 2019 to 2024, revealing the complex mechanisms through which microplastics influence GHG production. These mechanisms include the adsorption of nutrients and pollutants onto microplastic surfaces and their role as substrates for microbial colonization. The impacts of microplastics vary significantly across different environments, such as agricultural soils and marine sediments. The review underscores the urgent need for standardized methodologies and long-term field studies to accurately assess the ecological consequences of microplastics. Notably, the role of nitrous oxide (N2O), a potent GHG with a global warming potential nearly 300 times that of CO2, remains underexplored in the context of microplastic interactions, highlighting a critical research gap. Additionally, the synergistic effects of microplastics with other pollutants require further investigation to fully understand their cumulative impact on GHG emissions. This review calls for a coordinated effort among researchers and policymakers to advance our understanding of microplastics' role in global GHG budgets and to develop effective strategies for mitigating their environmental and climatic impacts.

With the significant annual increase in the market demand for biopesticides, the industrial production demand for predatory mites, which hold the largest market share among biopesticides, has also been rising.To achieve efficient and low energy consumption control of predatory mite breeding environmental parameters, accurate estimation of breeding environmental parameters is necessary. This paper collects and pre-processing hourly time-series data of temperature and humidity from industrial breeding environments. Time series prediction models such as SVR, LSTM, GRU, and LSTNet are applied to model and predict historical data of the breeding environment. Experiments validate that the LSTNet model is more suitable for such environmental modeling. To further improve prediction accuracy, the training data for the LSTNet model is enhanced using hierarchical clustering of time-series features. After augmentation, the root mean square error (RMSE) of temperature prediction decreased by 27.3%, and the RMSE of humidity prediction decreased by 32.8%, significantly improving the accuracy of multi-step predictions and providing substantial industrial application value.

Generating electricity from coal combustion is highly associated with ongoing pollution problems that negatively impact the environment. Coal fly ash (CFA) is a predominant waste by-product of coal combustion which is disposed of in exposed ash dams constructed in the vicinity of power stations. Its disposal requires a large piece of land and therefore more land is converted to unproductive disposal sites, degrading the ecosystem. This waste material is classified as a hazardous substance in South Africa due to unacceptable levels of inorganic and persistent organic pollutants and its potential for dust creation. CFA is recycled and sold to the building and construction sectors, but the rate of its utilization is far less than the production rate resulting to high volumes that is stockpiled in disposal sites. More than 500 million tons CFA is produced yearly and over 200 million tons yearly remain unused globally and more CFA will continue to be produced due to high consumer energy demands, especially in countries with heavy reliance on coal for power generation. In this context, the paper discusses production of CFA, pollution problems due to its disposal, examines existing gaps within the scope of ash dam restoration processes and presents opportunities offered by phytoremediation (a low-cost and environmentally friendly technology that utilizes plants to restore the degraded environments). Ecological restoration through the use of socio-economically valuable plants (aromatic plants, legumes and grasses) has potential in addressing societal challenges and consequently impacting positively the livelihood of communities.

Unmanned aerial vehicles (UAVs, drones) are not just a technological achievement based on modern ideas of artificial intelligence; they also provide a sustainable solution for green technologies in logistics, transport and material handling. In particular, using battery-powered UAVs to transport products can significantly decrease energy and fuel expenses, reduce environmental pollution, and improve the efficiency of clean technologies through improved energy-saving efficiency. We consider the problem of maximizing the average environmental benefit of a fleet of drones given a periodic schedule of tasks performed by the fleet of vehicles. To solve the problem efficiently, we formulate it as an optimization problem on an infinite periodic graph and reduce it to a special type of parametric assignment problem. We exactly solve the problem under consideration in O(n³) time, where n is the number of tasks performed by vehicles.

The experience of ego dissolution and self-transcendence induced by psychedelic substances offers a profound challenge to our conventional understanding of the self and our relationship with the natural world. This paper delves into the philosophical underpinnings and implications of this phenomenon, exploring how the temporary breakdown of ego boundaries during a psychedelic experience may foster a sense of profound interconnectedness with nature. Drawing from Western and Eastern philosophical traditions, as well as recent insights from neuroscience and consciousness studies, we examine the potential of psychedelic-induced self-transcendence to catalyze a shift in our perspectives on the human-nature relationship. The paper investigates the philosophical implications of this experience, including its resonance with deep ecological philosophies and its potential to inspire more ecocentric ethical frameworks. Furthermore, we explore the possible practical implications of fostering a sense of ecological connectedness through psychedelics, such as promoting environmentally sustainable behaviors and addressing the pressing challenges of climate change and ecological degradation. Ultimately, this exploration highlights the value of engaging with altered states of consciousness as a means to reconsider our place within the intricate web of life on Earth.

Recent research has specifically targeted the decision-making process of eco-friendly individuals, emphasizing the significance of recycling and its impact on sustainability. Our study extends this inquiry by examining the correlation between recycling participation and pro-environmental behavior among consumers, integrating the concepts of self-efficacy, feelings of pride, and social pressure into our analysis. Utilizing Partial Least Squares-Structural Equation Modeling (PLS-SEM), we aimed to explore the intricate relationships that underpin these behaviors. Results suggest that self-efficacy and feelings of pride significantly influence individuals' recycling behaviors, highlighting the role of psychological and social factors in promoting environmental sustainability. Interestingly, it was concluded that social pressure did not have the expected moderating effect on increasing consumers' feelings of pride and self-efficacy toward recycling activities.This study not only sheds light on the underlying mechanisms that drive pro-environmental actions but also contributes to understanding sustainability promotion through recycling and offers insights for policymakers and environmental advocates to foster environmental responsibility and behavior change.

Keywords: Biomass pyrolysis, Chemical Looping Combustion, Life Cycle Assessment, Environmental Impacts, Carbon Footprint.

The field of fluorescence sensing, leveraging various supramolecular self-assembled architectures constructed from macrocyclic pillar[n]arenes, has seen significant advancement in recent decades. This review comprehensively discusses, for the first time, the recent innovations in the synthesis and self-assembly of pillar[n]arene-based supramolecular architectures (PSAs) containing metal coordination sites, along with their practical applications and prospects in fluorescence sensing. Integrating hydrophobic and electron-rich cavities of pillar[n]arenes into these supramolecular structures endow the entire system with self-assembly behavior and stimulus responsiveness. Employing the host–guest interaction strategy coupled with complementary coordination forces, PSAs exhibiting both intelligent and controllable properties are successfully constructed. This provides a broad horizon for advancing fluorescence sensors capable of detecting environmental pollutants. This review aims to establish a solid foundation for the future development of fluorescence sensing applications utilizing PSAs. Additionally, current challenges and future perspectives in this field are discussed.

This paper explores the intricate world of microbial life, focusing on biofilm as a dynamic consortium of bacteria forming complex networks within a self-produced matrix of extracellular polymeric substances (EPS). Analogous to a bacterial house, these structures provide both shelter and support, playing a pivotal role in the microbial realm with dual effects on human and environmental contexts. Biofilm's significance extends beyond its microcosmic architecture, positively contributing to heavy metal removal, electricity generation through microbial fuel cells, and structural remediation, while also posing threats with detrimental formations implicated in conditions from lung to urinary tract infections. Control of biofilm becomes imperative to unlock its positive attributes and mitigate potential negatives, serving as a cornerstone for environmental remediation, sustainable energy, and infrastructure maintenance. Employing a comprehensive bibliographic approach, this study identifies keywords, countries, and organizations influencing biofilm research, proposing innovative avenues like machine learning for future exploration. The aim is not only to contribute to existing knowledge but to pioneer cutting-edge strategies for biofilm optimization and challenge mitigation, shaping its trajectory towards sustainable applications across diverse fields.

The possible future emergence of new SARS-CoV-2 virus variants pushes the development of new chemoprophylaxis protocols complementary to the unspecific and specific immune-prophylaxis measures currently used. The SARS-CoV-2 virus is particularly sensitive to oxidation due to the relevant positive electrical charge of its spike protein used as a ligand for target cells. The present study evaluated the safety and efficacy of a new oxidant preparation, liquid hyperoxygen (IOL), to neutralize the SARS-CoV-2 virus. IOL was incubated with throat swabs containing a human wild-type virus. The samples were then incubated with cells expressing the ACE2 receptor and therefore very sensitive to SARS-CoV-2 infection. The ability to neutralize SARS-CoV-2 was determined by assessing the amount of viral nucleic acid inside cells by PCR. The results obtained indicate that IOL, even at considerable dilutions, is capable, after incubation times of less than 30 min and even equal to 5 min, to completely inhibit SARS-CoV-2 infection. This inhibitory effect has been shown to be due to the oxidizing capacity of the IOL. This oxidizing capacity is exerted towards the virus but does not damage eukaryotic cells either in the in vitro or in the in vivo skin model. Obtained results indicate that the use of IOL, a hydrophilic liquid mixture saturated with highly reactive oxygen and nitrogen species, is a new powerful, safe, and effective tool for preventing possible future outbreaks of COVID-19 disease.

This research review paper comprehensively assesses the environmental impacts of diverse energy sources and proposes sustainable solutions. Fossil fuels contribute to pollution, habitat destruction, and greenhouse gas emissions. Renewable energy offers cleaner alternatives but faces challenges in manufacturing and disposal. Nuclear power has low emissions but poses risks in waste management and radiation. Biomass can be sustainable if responsibly sourced, but unsustainable practices lead to deforestation and emissions. Solutions include renewable technologies, energy efficiency, carbon capture, and sustainable transportation. Effective policies, incentives, and individual actions are crucial for a greener future. This review highlights the urgency of addressing energy-related environmental impacts and offers valuable insights for policymakers and individuals to take decisive actions for a sustainable energy future that protects the environment and promotes well- being.

The study aimed to investigate the effect of climate change exposure on affect and pro-environmental behavioural intentions in a randomised controlled trial. An online survey was completed by 100 adult participants and included measures of affect and pro-environmental behavioural intentions pre- and post-exposure. Participants were randomly allocated to a group that saw a climate change video (n=55) or a group that saw a non-climate change video (n=45). The findings showed were that participants in the climate change group showed a significant increase in negative affect and pro-environmental behavioural intention scores post-video exposure compared to the non-climate change video group. This suggests that climate change video exposure negatively influences affect but also potentially increases the intention to act pro-environmentally. These findings have the potential to support policies and societal change, however further investigation into the type of contents, actual behaviour change, and impacts on diverse populations (e.g., minority groups) is needed that influences pro-environmental behaviours is required. Furthermore, to achieve a greater impact, future research should be conducted measuring actual pro-environmental behaviour change, including with those from diverse populations.

There are four categories of medical waste that cannot be mixed as this will cause serious problems such as environmental pollution or infection. In the past, the classification of medical waste often involved a lot of human and material resources to process, with workers at risk of exposure to infectious substances. Therefore, an augmented reality (AR) and artificial intelligence (AI) medical waste classification system and method were developed. This innovative medical waste classification system and method combines AR and AI identification technology to reduce the risk of manual judgment errors by clinical staff when handling medical waste.

Commercial development of tidal stream energy is hampered by technical and financial challenges, and impeded by uncertainty about potential environmental effects that drive environmental risk assessments and permitting (consenting) processes. The effect of greatest concern for operational tidal stream energy devices is the potential for marine animals to collide with turbine blades, resulting in injury or death. Due to the turbulent and often turbid waters that frequently characterize tidal turbine sites, there is an absence of empirical evidence about collisions with marine animals. This paucity of observations often leads to risk-averse permitting decisions that further restrict the deployment of tidal energy devices that are needed to collect this evidence. This paper relies on the framework of stressors and receptors that is used widely in marine energy studies and outlines a stepwise probabilistic methodology that applies existing knowledge to further elucidate the risk to marine animals from operational tidal turbines. A case study using striped bass from the Bay of Fundy, Canada, accompanies the methodology, to partially demonstrate its application.

Powder metallurgy is a preferred manufacturing method in various industries because it offers design flexibility, material efficiency and a cost-effective production. In this work, we study the effects of different compaction directions on the strength of parts produced by powder metallurgy. Al–4wt.%Cu alloys are used due to their recyclability, and three distinctive compaction pressures are applied, resulting in two sample groups. One group is air-cooled after sintering, while the other is water-quenched and naturally aged (T4 temper). Both the compressive and tensile strengths are measured and analyzed. The study reveals that both heat treatments and compaction directions significantly influence anisotropic strengths. The novelty of this research lies in the use of powders that can be reused from machining, turning, or foundry rejection. By omitting or reducing the melting stage and employing simple powder metallurgy, the cost-effective and environmentally friendly processes are achieved. The planning of compaction load, compaction direction, and heat treatments is found to play a crucial role in determining the final mechanical performance. Notably, this approach aligns with the environmental, social and governance (ESG) practices that have been increasingly adopted by industry.

Interior designers play a pivotal role in shaping the built environment and catalyzing positive change through the adoption of sustainable design practices. This study centers on the analysis of prevailing attitudes held by interior designers in Jordan towards sustainable interior design practices. Through a comprehensive methodology involving a literature review and a three-part questionnaire, the research explores the benefits, challenges, and integration of sustainability principles. The study highlights substantial awareness (85%) of sustainable interior design's environmental impact and resource preservation. Additionally, 81% acknowledge its enduring significance, and 89% recognize its diverse benefits. While 61% exhibit familiarity, 27% claim professional experience. Among sustainability indicators, energy efficiency scores 4.25, resource efficiency 4.27, and "Design aligns with laws and regulations by the Ministry of Labor" ranks highest at 4.37. This study significantly augments our understanding of sustainable interior design by introducing a comprehensive evaluation framework that encompasses the three sustainability dimensions. It equips decision-makers with a robust tool to identify specific practices that bolster sustainability performance, further advancing the field.

The use of bioethanol in cooking is not new, but until recently its application has been confined exclusively to small scale projects. However, a new bioethanol cooking utility in Kenya has now reached mass market adoption, serving more than 950,000 households with cooking fuel since launching in late 2019. Its success was made possible by a significant investment in technology to facilitate safe, convenient and affordable fuel distribution. It is funded by climate finance which is based on bioethanol fuel replacing charcoal used for cooking, a leading cause of African defor-estation. This development has been so recent that it has not widely been discussed in the academic literature. More broadly, the health, environmental and economic impacts of bioethanol for cooking have not been systematically assembled in one place. This article details what is known about the impact of bioethanol for cooking, how and why bioethanol for cooking was able to suddenly reach commercially viable scale in spite of the challenges it faced. It also discusses implications for further scaling of clean cooking fuel solutions.

Sustainable supply chains have become increasingly crucial to address environmental and social challenges faced by societies worldwide. Last-mile delivery, which involves delivering products from a distribution center or warehouse to the final destination, typically a consumer's doorstep, is an essential component of the supply chain. However, it faces numerous challenges such as traffic congestion, air and noise pollution, and carbon emissions. This research paper explores the viability of last-mile delivery solutions for sustainable supply chains. The study reviews the literature on last-mile delivery challenges, sustainable last-mile delivery solutions, and case studies of sustainable last-mile delivery solutions. The results indicate that innovative last-mile delivery solutions, such as electric vehicles, cargo bikes, and drones, have the potential to reduce environmental impact and improve the efficiency of last-mile delivery while enhancing social equity. Additionally, partnerships between different stakeholders, including governments, logistics companies, and consumers, can contribute to the development of sustainable last-mile delivery solutions. The study concludes that sustainable last-mile delivery solutions are essential to achieving sustainable supply chains and recommends further research to explore the economic feasibility and scalability of these solutions.

Transdermal drug delivery (TDD) is one of the key approaches for treating diseases, avoiding first-pass effects, reducing systemic adverse drug reactions and improving patient compliance. Microneedling, iontophoresis, electroporation, laser ablation and ultrasound facilitation are often used to improve the efficiency of TDD. Among them, microneedling is a relatively simple and efficient means of drug delivery. Microneedles usually consist of micron-sized needles (50-900 μm in length) in arrays that can successfully penetrate the stratum corneum and deliver drugs in a minimally invasive manner below the stratum corneum without touching the blood vessels and nerves in the dermis, improving patient compliance. Hydrogel-forming microneedles (HFMNs) are safe, non-toxic, no residual matrix material, high drug loading capacity, controlled drug release and are suitable for long-term, multiple drug delivery. This work reviewed the characteristics of skin structure and transdermal drug delivery; introduced TDD strategies based on hydrogel microneedles; summarised the characteristics of HFMNs TDD systems and the evaluation methods of HFMNs; and the application of HFMNs drug delivery systems in disease treatment. The HFMNs drug delivery system has a wide scope for development, but the translation to clinical application still has more challenges.

Environmental regulation has dual effects on water resource utilization performance through various channels such as the "three red lines" and the "Porter hypothesis". Based on the detailed analysis of the impact path of environmental regulation on water resource utilization performance, the two-step system GMM method was adopted to test the dual effects of environmental regulation on water resource utilization performance by using panel data of 30 provinces and cities from 2004 to 2020. The results show that: (1) Environmental regulation has a significant direct impact on water resource utilization performance, and is currently in the stage of positive relationship of an inverted u-shaped relationship. (2) Environmental regulation has a significant indirect impact on water resource utilization Environmental regulation has dual effects on water resource utilization performance through various channels such as the "three-red lines" and the "Porter hypothesis". In accordance with a detailed examination of the influence path of environmental regulation on the performance of water resource utilization, the double effects of environmental regulation on water resource utilization performance were examined using panel statistics from 30 provinces and cities from 2004 to 2020 using the two-step system GMM approach. The results demonstrate that: (1) Environmental regulation has a direct effect on water resource utilization performance which is currently in the stage of the positive relationship of an inverted u-shaped relationship. (2) The influence of environmental regulation on water resource utilization performance through government intervention and industrial structure adjustment is indirect, among which government intervention can significantly improve water resource utilization performance, while the growth of the tertiary industry as a percentage can lower water resource utilization performance. (3) Both direct and indirect impacts indicate that enhancing the efficiency of the use of water resources is sustainable, and the water resource utilization performance of the preceding period had a major positive impact over the present phase. Therefore, the paper sets out a few policy suggestions, such as choosing reasonable environmental regulation tools, actively guiding the market-oriented reform with constraints, and upgrading the industrial structure in a green way.

“Sustainable development” (SD) is a term that has gained prominence in the international dia-logue around development. Many, however, continue to misunderstand the concept, its principles, its development, and its operationalization. The wide variety of definitions and interpretations of SD lean toward institutional and social prerogatives rather than unifying the essence of the con-cept, which is rooted in conventional ideas and values. By delving deeper into the paradigm, its history, and its potential, this research sought to contribute to ongoing discussions about sus-tainable development. The literature was thoroughly analyzed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020. This historical and conceptual analysis sought to update the body of knowledge on sustainability and sustainable development by examining the metaphorical and epistemological underpinnings of SD’s various definitions, evolutions, and principles. The research concludes and argues that intergenerational justice, based on the environment, economy, and society, is the central tenet of the entire sustainable develop-ment argument. The focus and consideration of interested parties are moving from the protection of the environment to social sustainability. The future of SD is likely to continue to focus much more on the social pillar and integrate digitalization in implementing the SD concept, especially in the fourth industrial revolution. To promote ethical human behavior and activities worldwide, at national and local levels, decision-makers must be continuously cognizant of the interdepend-encies, direct interactions, and balance between the three core constructs of SD.

The current COVID19 pandemic has raised huge concerns for outdoor air quality due to expected lungs deterioration. These concerns include the challenges in the scalable prediction of harmful gases like carbon dioxide, iterative/repetitive inhaling due to mask and environmental temperature harshness. Even in the presence of air quality sensing devices, these challenges lead to failed planning and strategy against respiratory diseases, epidemics, and pandemics in severe cases. In this work, a dual time-series with bi-cluster sensor data-stream-based novel optimized regression algorithm was proposed with optimization predictors and optimization responses that use automated iterative optimization of the model based on the similarity coefficient index. The algorithm was implemented over SeReNoV2 sensor nodes data, i.e. multi-variate dual time-series of environmental and US Environmental Protection Agency standard sensor variables for air quality index measured from air quality sensors with geospatial profiling. The SeReNoV2 systems were placed at four locations that were 3 km apart to monitor air quality and their data was collected at Ubidots IoT platform over GSM. Results have shown that the proposed technique achieved a root mean square error (RMSE) of 1.0042 with a training time of 469.28 seconds for normal and RMSE of 1.646 in the training time of 28.53 seconds for optimization. The estimated R-Squared error of 0.03 with Mean-Square Error for temperature 1.0084 ᵒC and 293.98 ppm for CO2 was observed. Furthermore, the Mean-Absolute Error (MAE) for temperature 0.66226 ᵒC and 10.252 ppm for CO2 at a prediction speed of ~5100 observations/second for temperature 45000 observations/second for CO2 due to iterative optimization of the training time 469.28 seconds for temperature and 28.53 seconds for CO2 was very promising in forecasting COVID19 countermeasures before time.

Phosphorus (P) is the most important substance in inorganic fertilizers used in agriculture industry. In this study, a multi-product and multi-objective model is presented considering economic and environmental concerns to design a renewable and sustainable P-fertilizer supply chain management (PFSCM). To handle complexities of the proposed model, an ensemble knowledge-based three-stage heuristic-metaheuristic algorithm utilizing heuristic information available in the model, whale optimization algorithm, and variable neighborhood search (named H-WOA-VNS) is proposed. At first, a problem-dependent heuristic is designed to generate a set of near-optimal feasible solutions. These solutions are fed into a population-based whale optimization algorithm which benefits from both exploration and exploitation strategies. Finally, a single-solution metaheuristic based on variable neighborhood search is applied to further improve the quality of the solution using local search operators. The objective function of the algorithm is formulated as a weighted average function to minimize total economic cost, while increasing crop yield and P use efficiency. Experimental results over five synthetic datasets and a real case study of the P-fertilizer supply chain confirm the superiority of the proposed method against the state-of-the-art techniques. The results demonstrate that the proposed method performs well in optimizing both the economic cost and environmental issues.

Waste recovery is an important aspect towards human and environmental health protection. Unfortunately, proper food waste management is among the serious challenges in the field of solid waste management worldwide. Therefore, it is of great importance to conduct studies towards achieving efficient and cost-effective approaches for food waste management. This study investigated the potential of recovering food waste through maggots’ production as animal feed. The influence of fly attractant application on maggot production was also investigated. The study also investigated the potential of maggot production for waste recovery and reduction. Four different types of food waste (starch food leftovers, rotten bananas and peels, rotten pineapple and peels, and rotten oranges) were used in the investigation process. From the results, it was observed that the application of fly attractants had a significant effect on the production of maggots as determined by the weights after harvesting. Average weight of 94 g/kg of maggot was achieved from banana materials with an application of fly attractant during the 8th day of the cultivation; which is equivalent to a 32.4% increase from the same day when the material was cultured without applying fly attractant. Also, from the starch materials, about 77 g/kg of maggot weight was achieved; which is a 54.6% increase from the same day and the same material but without application of fly attractant. Moreover, the relative dry weight reduction in the trials varied from 52.5% to 82.4%.

Lead-210 from natural atmospheric fallout is widely used in multidisciplinary studies to date recent sediments. Some of the ²¹⁰Pb-based dating models can produce historical records of sediment accumulation rates (SAR) and initial activity concentrations ( ). The former have been profusely used to track past changes in the sedimentary conditions. Both physical magnitudes are differently affected by model errors (those arising for the partial or null accomplishment of some model assumptions). This work is aimed at assessing the effects on SAR and of model errors in the CRS, CS, PLUM and TERESA dating models, due to random variability in ²¹⁰Pb fluxes, which is a usual sedimentary condition. Synthetic cores are used as virtual laboratories for this goal. Independently of the model choice, SARs are largely affected by model errors, resulting in some large and spurious deviations from the true values. This questions their general use for tracking past environmental changes. are less sensitive to model errors and their trends of change with time may reflect real changes in sedimentary conditions, as it is shown with some real cores from varved sediments.

Coral reefs are critical ecosystems globally for marine fauna, biodiversity and through the services they provide to humanity. However, they are significantly threatened by anthropogenic stressors, such as climate change. By combining 9 environmental variables and ecological and health-based thresholds obtained from the available literature, we develop, using fuzzy logic (discontinuous functions), a Coral Reef Stress Exposure Index (CRSEI) for remotely monitoring coral reef exposure to environmental stressors. Our approach capitalises on the abundance of readily available satellite Earth Observation (EO) data available in the Google Earth Engine (GEE) cloud-based geospatial processing platform. CRSEI values from 3157 distinct reefs were generated and mapped across 12 important coral reef ecosystem regions. Quantitative analyses indicated that the index detected significant temporal differences in stress and was, therefore, able to capture historic change at a global scale. We also applied the CRSEI to three case-study reef ecosystems, previously well-monitored for stress and disturbance using other methods. PCA analysis indicated that depth, current, sea surface temperature (SST) and SST anomaly accounted for the greatest contribution to the variance in stress in these three regions. The CRSEI corroborated temporal and spatial differences in stress exposure from known disturbances within these reference regions, in addition to identifying the potential drivers of inter- and intra-region differences in stress, namely depth, degree heating weeks and SST anomaly. We discuss how the index can be further improved in future with site-specific thresholds for each stress variable, and the incorporation of additional variables not currently available in GEE. This index provides an open access tool, built around a free and powerful processing platform, that has broad potential to assist in the regular monitoring of our increasingly imperilled coral reef ecosystems, and, in particular, those that are remote or inaccessible.

The primary purpose of this article is to present a maturity model dealing with environmental manufacturing processes in a company. First, a theoretical approach is presented where evolution from the first industrial revolution to the present (Industry 4.0.) is outlined with a need to implement environmental initiatives. Chapter two contains a detailed literature review, which resulted in the creation of our own maturity model presented in the next chapter. According to some authors, Industry 4.0 is based on characteristics that have already been the focus of “lean and green” concepts. The practical part of the article is a case study that shows which areas of the manufacturing process have “environmental” potential. The goal was to move from resource consumption, pollutant emissions and more extensive manufacturing towards environmentally responsible manufacturing (ERM). Using environmental materials and methods reduces energy consumption, which generates cost savings and higher profits. Here, VSM (Value Stream Mapping) was applied to identify core processes with environmental potential. The final part of the article summarizes the work and presents future possibilities. This paper provides an understanding of the role of environmental manufacturing in the era of the 4th industrial revolution.

This article analyses the environmental impact of the measures imposed during the SARS-CoV-2 pandemic. We compare the evolution of atmospheric pollution levels in recent years and during lockdown, and assess the effects of the decrease in mobility and changes in patterns and lifestyles during the latter period. Thus, the reduction in the risk to human health brought about by the improvement of air quality during the months of confinement through the use of dose-response functions is estimated. The focus of the case study is the island of Tenerife. The island of Tenerife has been selected because it can serve as an example for other sites in Europe. We distinguish between the three areas with the highest population concentrations: the Metropolitan, Southern, and Northern areas. The impacts of air pollution and its relationship with changes in consumption and activity patterns are clearly distinguishable. Therefore, the lessons learned can be easily extrapolated to other areas, in both island and mainland contexts.

Organic-organic interactions play important roles in the secondary organic aerosol formation, but the interactions are complex and poorly understood. Here we use environmental molecular beam experiments combined with molecular dynamics simulations to investigate the interactions between methanol and nopinone, as atmospheric organic proxies. In the experiments, methanol monomers and clusters are sent to collide with three types of surfaces, i.e., graphite, thin nopinone coating on graphite and multilayer surfaces, at temperatures between 140 K and 230 K. Methanol monomers are efficiently scattered from the graphite surface, whereas the scattering is substantially suppressed from nopinone surfaces. The desorption from the three surfaces is similar, suggesting that all the surfaces have weak or similar influences on the methanol desorption. The molecular dynamics results show that upon collisions the methanol clusters shatter, and the shattered fragments quickly diffuse and recombine to clusters. The desorption involves a series of processes, including detaching from clusters and desorbing as monomers. The experimental results also show that all trapped methanol molecules completely desorb within a short experimental time scale at temperatures of 180 K and above. At lower temperatures, the desorption rate decreases, and a long experimental time scale is used to resolve the desorption, where three desorption components are identified. The fast component is beyond the experimental detection limit. The intermediate component exhibits multi-step desorption character and has an activation energy of E_a = 0.18 ± 0.03 eV, in good agreement with simulation results. The slow desorption component is related to diffusion processes due to the weak temperature dependence.

Temperature is one of the most important range-limiting factors for many seaweeds. Driven by the recent climatic changes, rapid northward shifts of species’ distribution ranges can potentially modify the phylogeographic signature of Last Glacial Maximum such as increased genetic diversity at lower latitudes. To explore this question in detail in the kelp Saccharina latissima, we used microsatellites and double digest RAD-sequencing derived SNPs on S. latissima sporophytes sampled within 11 sites spanning the entire European Atlantic latitudinal range of this species. In addition, we checked for statistical correlation between genetic marker allele frequencies and three environmental proxies (sea surface temperature, salinity, and water turbidity). Our findings revealed that genetic diversity was significantly higher for the northern localities compared to the southern ones in contrast to the expected phylogeographic pattern. This suggests that the southernmost S. latissima populations are negatively affected by the recent climatic changes but also that the recolonization of S. latissima range following the LGM may have occurred from northerly refugia. Seven SNPs and 12 microsatellite alleles were found to be significantly associated with at least one of the three environmental variables. We discuss the potential adaptive functions of the genes associated with the outlier markers and the importance of these markers for successful conservation and aquaculture strategies for S. latissima in this age of rapid global change.

Greek yogurt (GY), a high-protein-low-fat dairy product, particularly prized for its sensory and nutritional benefits, revolutionized the North American yogurt market in less than a decade, bringing with it new sustainability challenges. The standard production of GY generates large volumes of acid whey, a co-product that is a potential source of environmental pollution if not recovered. This study aims to assess the environmental performance of different technologies and identify the main factors for improving GY production. A complete life cycle assessment (LCA) was performed to compare the standard technology (centrifugation) with two new technologies (fortification and ultrafiltration) to reduce acid whey volumes. Three milk protein concentrate alternatives were also assessed. Results show that the technology choice is not a clear discriminant factor. However, minimizing losses and wastage (accounting for 23 to 25% of the environmental impacts for all indicators) beyond the processing plant and selecting milk ingredients (accounting for 63 to 67% of the impacts) with low environmental impacts are key factors in improving the environmental performance of GY systems. From a methodological perspective, the results also highlight a shortcoming in the current International Dairy Federation LCA guidelines (2015) for treating the multifunctionality of GY systems.

Over the last decades, the coated glass products, and especially the low-emissivity coatings have become a common building material used in modern architectural projects. More recently, these material systems became common in specialized glazing systems featuring solar energy harvesting. Apart from achieving the stability of optical parameters in multilayer coatings, it is also important to have improved control over the design of visual color properties of the coated glass. We prepare metal-dielectric composite (MDC) based multilayer thin-film structures using the RF-magnetron sputtering deposition and report on their optical and chromaticity properties in comparison with these obtained using pure metal-based Dielectric/Metal/Dielectric (DMD) trilayer structures of similar compositions. Experimentally achieved Hunter L, a, b values of MDC-based multilayer building blocks of coatings provide a new outlook on the engineering of future-generation optical coatings with better color consistency and developing approaches to broaden the range of achievable color coordinates and better environmental stability.

Community-engaged research is understood as existing on a continuum from less to more community engagement, defined by participation and decision-making authority. It has been widely assumed that more is better than less engagement. However, we argue that what makes for good community engagement is not simply the extent but the fit or alignment between the intended approach and the various contexts shaping the research projects. This article draws on case studies from three Community Engagement Cores (CECs) of NIEHS-funded Environmental Health Science Core Centers (Harvard University, UC Davis and University of Arizona,) to illustrate the ways in which community engagement approaches have been fit to different contexts and the successes and challenges experienced in each case. We analyze the processes through which the CECs work with researchers and community leaders to develop place-based community engagement approaches and find that different strategies are called for to fit distinct contexts. We find that alignment of the scale and scope of the environmental health issue and related research project, the capacities and resources of the researchers and community leaders, and the influences of the socio-political environment are critical for understanding and designing effective and equitable engagement approaches. These cases demonstrate that the types and degrees of alignment in community-engaged research projects are dynamic and evolve over time. Based on this analysis, we recommend that CBPR scholars and practitioners select a range of project planning and management techniques for designing and implementing their collaborative research approaches and both expect and allow for the dynamic and changing nature of alignment.

Dams design and their operation cause strong environmental alteration and therefore a long-term debate is ongoing for the scale of these projects. At the same time, the concept of Environmental Flow Assessment (EFA) is a crucial element of modified ecosystems featuring large infrastructure such as dams and reservoirs for mitigating potential environmental degradation while they operate. Nowadays, integrated scientific frameworks are required to quantify the risks caused by large infrastructure. Through the use of stochastic analysis, it is possible to quantify these uncertainties, and present a solution that incorporates long-term persistence and environmental sustainability into a balanced reservoir simulation model. In this work, an attempt is made to determine a benchmark reservoir size incorporating hydrological and ecological criteria though stochastic analysis. The primary goal is to ensure the best possible conditions for the ecosystem, and then secondarily to allow a steady supply of water for other uses. Using a synthetic timeseries based on historical inputs, it is possible to determine and preserve essential statistical characteristics of a river’s streamflow, and use these to detect the optimal reservoir capacity that maximizes environmental and local water demand reliability.

In recent years, the anticipation of sustainable commercial supersonic jet operations has elevated again. Advances in propulsion together with the increased usage of composite materials favour the potential of sustained and cost efficient supersonic commercial operations. However, obstacles remain with regards to the certification of the new supersonic aircraft platforms, while the two main certification bodies EASA and FAA are under pressure to develop certification requirements which will reassure that the supersonic operations are going to have the least possible environmental impact. From a design perspective, past and current research suggests that a trade-off exists between the aircraft performance and the environmental impact, which should be balanced. The current study attempts to balance this trade-off and to conceptually design a SuperSonic Business Jet (SSBJ) by taking into account environmental concerns of the supersonic flight together with design methods that facilitate a sustained supersonic cruise. An environmental impact assessment is undertaken for the SSBJ design and its results are compared to a typical commercial subsonic airliner.

Mineral profile of beef interests human health, but also animal performance and meat quality. This study analyzes the relationships of 20 minerals in beef (ICP-OES) with 3 animal performance and 13 meat quality traits analyzed on 182 samples of Longissimus thoracis. Animals’ breed and sex showed limited effects. The major sources of variation (farm/date of slaughter, individual animal within group and side/sample within animal) differed greatly from trait to trait. Mineral contents were correlated to animal performance and meat quality being significant 52 out of the 320 correlations at the farm/date level, and 101 out of the 320 at the individual animal level. Five latent factors explained 69% of mineral co-variation. The most important, “Mineral quantity” factor correlated with age at slaughter and with the meat color traits. Two latent factors (“Na+Fe+Cu” and “Fe+Mn”) correlated with performance and meat color traits. Two other (“K-B-Pb” and “Zn”) correlated with meat chemical composition and the latter also with carcass weight and daily gain, and meat color traits. Meat cooking losses correlated with “K-B-Pb”. Latent factor analysis appears be a useful means of disentangling the very complex relationships that the minerals in meat have with animal performance and meat quality traits.

Dendritic cells (DCs) are the professional antigen-presenting cells that recognize and present antigens to naïve T cells to induce antigen-specific adaptive immunity. Among the T-cell subsets, T helper type 2 (Th2) cells produce the humoral immune responses required for protection against helminthic disease by activating B cells. DCs induce a Th2 immune response at a certain immune environment. Basophil, eosinophil, mast cells, and type 2 innate lymphoid cells also induce Th2 immunity. However, in the case of DCs, controversy remains regarding which subsets of DCs induce Th2 immunity, which genes in DCs are directly or indirectly involved in inducing Th2 immunity, and the detailed mechanisms underlying induction, regulation, or maintenance of the DC-mediated Th2 immunity against allergic environments and parasite infection. A recent study has shown that a genetic defect in DCs causes an enhanced Th2 immunity leading to a severe atopic dermatitis. We summarize the Th2 immune-inducing DC subsets, the genetic and environmental factors which involved in DC-mediated Th2 immunity, and current therapeutic approaches for Th2-mediated immune disorders. This review is to provide an improved understanding of DC-mediated Th2 immunity and Th1/Th2 immune balancing, leading to control over their adverse consequences.

Abstract: The aim of this study was to compare the influence of corporate board characteristics on the extent of environmental disclosure quantity of listed firms in two leading emerging economies in Africa, South Africa (integrated reporting framework) and Nigeria (traditional reporting framework). Methods: The sample was comprised of 303 firms including environmentally sensitive companies purposively selected for content analysis study in South Africa (213) and Nigeria (90). We used both descriptive, multivariate and regression models to comparatively analyze the differences about corporate board characteristics as determinants of the extent of their environmental disclosure quantity. Results: The results reveal a more significant positive association between board characteristics and environmental disclosure in South Africa and less relevant association in Nigeria. Also, the results support that board independence arrangement may serve as bonding mechanisms in weak reporting environments, suggesting a substitutive relationship between board independence and the regulatory framework. Quiet revealing a board with environmental committee show a higher tendency to be ecologic transparent in both countries. However, in a traditional reporting framework, the environmental committee is not enough; its effect was insignificant and highly significant in the integrated reporting framework. Further revealed is the significant positive effect of industry membership influence on environmental disclosure. In all estimated models of South Africa sample show that 45% of environmentally sensitive industries significantly influence environmental disclosure, while 51% is environmentally polluting industries in Nigeria show less concern on environmental disclosure. Interestingly, Audit firm size (Big4) positively and statistically significantly associated with overall environmental reporting in both countries. The results are consistent with stakeholder theory, agency theory, institutional and legitimacy theory suggesting that a strong board size, independent members of the board with auditing experience, the active environmental committee in conjunction with solid audit reputation may reduce information asymmetry. Our findings will be helpful for policymakers and other regulators who are interested in environmental impact reporting.

The devastating growth in the worldwide frequency of neurocognitive disorders and its allied difficulties such as decline in memory, spatial competency, and ability to focus poses a significant psychological public health problem. Inhibitor of Differentiation (ID) proteins are members of a family of helix-loop-helix (HLH) transcription factors. ID proteins have been demonstrated to be involved in neurodevelopmental & depressive diseases and thus may influence neurocognitive deficiencies due to environmental exposure. Previously, it has been demonstrated that environmental factors such as estrogenic endocrine disruptors (EEDs) have played an essential role in the influence of various neurocognitive disorders such as Alzheimer’s, Dementia, and Parkinson’s disease. Based on this increasing number of reports, we consider the impact of these environmental pollutants on ID proteins. Better understanding of how these ID proteins by which EED exposure can affect neurocognitive disorders in populations will prospectively deliver valuable information in the impediment and regulation of these diseases linked with environmental factor exposure.

Wireless sensor networks can provide a cheap and flexible infrastructure to support the measurement of noise pollution. However, the processing of the gathered data is challenging to implement on resource-constrained nodes, because each node has its own limited power supply, low-performance and low-power micro-controller unit and other limited processing resources, as well as limited amount of memory. We propose a sensor node for monitoring of indoor ambient noise. The sensor node is based on a hardware platform with limited computational resources and utilizes a number of simplifications to approximate more complex and costly signal processing stage. Furthermore, to reduce the communication between the sensor node and a sink node, as well as the power consumed by the IEEE 802.15.4 (ZigBee) transceiver, we perform digital A-weighting filtering and non-calibrated calculation of the sound pressure level on the node. According to experimental results, the proposed sound level meter can accurately measure the noise levels of up to 100~dB, with the mean difference of less than 2~dB compared to Class 1 sound level meter. The proposed device can continuously monitor indoor noise for several days. Despite the limitations of the used hardware platform, the presented node is a promising low-cost and low-power solution for indoor ambient noise monitoring.

The World Health Organization recently proposed the Tricycle Protocol for harmonized surveillance of extended-spectrum beta lactamase-producing E. coli (ESBL-Ec) as a proxy for AMR among humans, animals, and the environment. We implemented the Tricycle Protocol with ceftriaxone (CRO) to screen for ESBL-Ec using membrane filtration (TBX-CRO) and Colilert Quanti-Tray (CQT-CRO) workflows in parallel applied to water samples collected from four lakes. ESBL-Ec and E. coli abundance and prevalence, and ESBL-Ec to E. coli ratios were significantly higher in the two highly impacted lakes (receiving sewage treatment plant effluent, open defecation site adjacent to informal settlements) compared to less impacted lakes (wildlife sanctuary, recreational site). The cumulative burden of antibiotic compounds was also higher in the highly impacted lakes. Even in the “pristine” lake in a bird sanctuary, ESBL-Ec and an antibiotic compound were present. Overall, the CQT-CRO format yielded reasonable qualitative (K = 0.603) and quantitative agreement (intra-class correlation coefficient = 0.849) and linearity (r² = 0.785) with the TBX-CRO format adapted from the Tricycle Protocol. However, CQT-CRO doubled the prevalence of ESBL-Ec in settings with decreased E. coli abundance. Consistent with observations for other third-generation cephalosporins, CRO performed poorly for screening the ESBL phenotype. Further, confirmed ESBL-Ec isolates were not associated with an increased number of resistance phenotypes compared with non-ESBL isolates. Instead, the number of resistance phenotypes was associated with the lake from which the sample was collected. In high-burden settings, AMR surveillance efficiency could be increased by directly testing generic E. coli isolates for ESBL phenotype and antibiotic susceptibility. Our experience also suggests that sequencing ESBL-Ec will likely be required to determine epidemiologically appropriate risk mitigation strategies where ESBL-Ec are prevalent. Resource limitations could jeopardize the relevance of the Tricycle Protocol for changing the trajectory of AMR in high-burden low-resource settings globally.

The hydrochemical composition of the Upper Jurassic groundwaters in the South German Mo-lasse Basin (SGMB) indicates a heterogeneous and varying hydrogeochemical evolution, which contradicts previous flow model concepts. For this study, the data of 88 Tertiary, Cretaceous and Upper Jurassic groundwater samples were investigated for hydrochemical elements, 2H/18O-H2O isotopes, 87Sr/86Sr ratios as well as δ11B values. In addition, the geochemical composition, 87Sr/86Sr and δ11B values were analysed from depth-oriented Upper Jurassic rock samples to delineate water-rock interactions in the aquifer systems. Slightly elevated 87Sr/86Sr ratios of the carbonates compared to the typical signatures of marine Upper Jurassic carbonates indicate a synsedimentary radiogenic influence due to the erosion of the adjacent Bohemian Massif. However, these values cannot explain the significant higher Sr-isotope fingerprint of the groundwaters in the central SGMB. Different water types occur in the Upper Jurassic aquifer, primarily distinguished by the dominant cations, calcium or sodium with subclasses of the major anions. The calcium-dominated groundwaters occur mainly at the western and northern margins of the SGMB. The sodi-um-dominated ion exchange groundwaters instead dominate in the central and eastern SGMB. With increasing strontium content, the 87Sr/86Sr ratios of the Upper Jurassic groundwater samples either indicate a strontium uptake by carbonate of the host rocks, or a prevailing radiogenic sig-nature. This implies a basic interaction with terrestrial or marine Tertiary sediments. The results illustrate a downward transformational fluid flow systematic via the thick Tertiary sediment cover into the Upper Jurassic carbonate formation in the SGMB, highlighting a new understanding on the evolution of the Upper Jurassic groundwaters and a basin-wide recharge mechanism.

The altitude of the habitat is one of the important regulators of species survival. Kaçkar Mountains National Park is located in the Eastern Black Sea region of Turkey. This is the first study on the benthic diatom flora of the high mountain lakes in Kaçkar Mountains National Park, which is situated between 2782 and 3075 m a.s.l. A total of 84 diatom species were identified from benthic communities of 15 habitats in summer (19 July, 28 August) and autumn (10 September) months of 2020. The genus Pinnularia (13 species) formed the basis of the taxonomic list followed by Eunotia (5 species), Navicula (5 species), and Frustulia (4 species) genera, respectively. The waters in all the studied lakes were fresh, low-saline, with low-alkaline or circumneutral pH and organically uncontaminated as evidenced by prevailed bioindicator groups. Statistical methods and comparative floristic results confirm the role of the lake altitude for the diatom species distribution. Species richness was higher in lakes with lower altitude, but a statistical approach also revealed a tendency for it to increase with altitude if species richness increased. Further studies will be needed to continue exploring this pattern. In the first round of analysis, diatom species groups were categorized according to IUCN categories, revealing one potentially threatened and one rare species. To protect studied high mountain lakes, their ecological conditions must be constantly monitored in the Kaçkar Mountains National Park.

Life Cycle Assessment (LCA) is a technique developed to measure possible environmental impacts during the manufacture and use of a given product or service. Additive Manufacturing (AM) has proven to be suitable in several industries, especially wire and arc additive manufacturing (WAAM), offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and equivalent CO₂ emissions (CO₂e). This study aimed to develop a methodology to evaluate environmental indicators during the life cycle assessment, from gate-to-gate, in the production of two low-alloy carbon steel metal parts (flanges) using ER-90 wire and allowed identifying the main stages that most influence environmental indicators. The total energy consumption in the production of flanges 1 and 2 were, respectively, 10,239.0 MJ, 12,754.0 MJ and the total carbon footprint, respectively, 714.1 kgCO₂e kg^-1 and 749.3 kgCO₂e kg^-1.

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200−1000 °C in the limited presence of O2 of different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BCs to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they also can cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally could consist of a mixture of carbon- and oxygen-centered radicals, and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote a more productive and beneficial use of BC and related PFRs and stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFRs formation in BCs. Secondly, we have discussed the PFRs environmental migration and transformation; we have reported the main PFRs-mediated applications of BCs to degrade inorganic and organic pollutants, the correlated environmental potential risks, and the possible strategies to limit them.

Sado Island in Niigata prefecture, Japan is one of the first Globally Important Agricultural Heritage Systems (GIAHS) among developed countries and has since been involved in environmental conservation agriculture (ECA). While ECA is still in its early stage in Japan, it has proven to be effective in mitigating climate change in the agricultural sector; hence, this study analyzed the factors which could contribute to the ECA continuation among Sado Island farmers. The data revealed the prevalence of farmers’ cognitive dissonance between ECA and its mitigating effects on climate change. Exploratory factor analysis and ordinal regression confirmed the importance of perceived GIAHS involvement in the continuation of ECA. In addition, other identified factors affecting ECA continuation fall either on a macro-level (i.e., farmers’ awareness of their role in improving their environment) or micro-level (i.e., farmers’ differing farm optimizations). These perspectives highlighted the altruistic nature of the Sado Island ECA farmers by valuing the improvement of their local and global environment as their main reason to continue ECA, whereas their various farm management optimizations support this observed farmer altruism by providing avenues to increase yield with only a moderate paddy land area. This study thereby highlights the need to continuously develop sustainable strategies to maintain and improve a positive farmer mindset towards ECA.

Ovarian cancer (OC) represents a significant challenge in the realm of gynecological cancers, characterized by poor survival rates and complex etiology. In this review, we delve into the se-lected genetic, environmental, and hormonal factors underpinning OC development. We have reviewed scientific databases searching for ovarian cancer genetic and epigenetic factors. We have included studies based on their relevancy. As a result of exploring ovarian carcinogen-esis, this systematic review contains data collected from 126 various works. The role of prominent genetic players such as BRCA mutations, DNA repair mechanisms, un-derscores the intricate landscape of OC susceptibility. We explore Li-Fraumeni and Lynch syn-drome, which impart a heightened predisposition to OC development. Hormonal factors such as estrogen, progesterone, and androgens are also discussed. Environmental alterations, ranging from lifestyle influences on OC to microbiome dysbiosis and lifestyle factors such as obesity, al-cohol consumption, and physical activity intersect with genetic and epigenetic pathways, shaping the risk landscape for OC. Through a meticulous examination of current literature, this review provides a nuanced under-standing of the multifactorial nature of OC, emphasizing the need for holistic approaches to prevention, diagnosis, and treatment.

Shared public buildings have become centers of innovation, integrating advanced technologies to meet evolving societal needs. With a heightened emphasis on occupants’ health and well-being, these buildings serve as hubs for technological convergence, facilitating seamless connectivity and intelligent data analysis and management. Within this context, environmental monitoring emerges as a foundational element, pivotal to all aspects of building management. This article provides findings from the nationally funded RE-START project, which focuses on shared public buildings, with special regard to educational and medical facilities. The project explores enhanced indoor air quality monitoring, focusing in particular on CO2 concentration that is directly correlated with occupancy, as a fundamental element for developing health and safety protocols, energy efficiency strategies, integration of smart building technologies, and data-driven energy management. The intersection of environmental monitoring, energy efficiency, security, and IoT technologies in in indoor spaces are relevant. The outcomes of the study reveal the delicate nature of all the involved components, that need to be carefully developed in an integrated manner.

Is it true that the nuclear technology applied to electric energy generation offers a clean, safe, reliable and affordable i.e. sustainable alternative? Yes it is, but its impact on the environment strongly depends on the implementation bearing residual risks due to a human factor, technical failures or natural catastrophes. A full response is therefore difficult and can first be given when the wicked multi-disciplinary problems get well formulated and “solved”. These problems have multi-dimensional nature lying at the interface between: necessary R&D effort, the industrial deployment and the technology impact in view of the environmental sustainability including the management of produced hazardous waste. This enormous complexity indicates that just a description of the problem might represent a problem. The paper proposes a holistic approach to assess the nuclear energy systems potential with respect to sustainable performance applying Multi-criteria decision analysis with a suitable objective tree and a multi-level criteria structure and examines the trading-off techniques for ranking of the alternatives. The framework proposes a multi-criteria and multi-stakeholders treatment which can be used as a pre-decisional support towards an implementation of nuclear fuel cycles adapted to national preferences and priorities. Proposed approach addresses some aspects of the environmental footprint of nuclear energy systems. Advanced nuclear fuel cycles, previously investigated by the NEA/OECD expert group WASTEMAN, are analyzed as a case study. Sustainability facets of waste management, resource utilization and economics are in focus.

This study provides a detailed investigation into the pathways through which microplastics from urban sources are transported to marine ecosystems, their distribution across different environments, and their impacts on marine life. Utilizing a combination of water and sediment sampling across urban, riverine, and marine environments, the research quantitatively assesses the concentration and types of microplastics present, and evaluates the ecological consequences of their accumulation in marine ecosystems. The findings reveal a significant concentration of microplastics in all examined environments, with the highest levels detected in urban areas, closely linked to industrial activities and inadequate waste management practices. The study documents a variety of microplastic polymers, with polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) being the most prevalent. A substantial impact on marine organisms was observed, including evidence of microplastic ingestion across a wide range of species and indications of stress and physical damage to coral reefs. Seasonal variations indicate that microplastic concentrations peak during periods of high rainfall, suggesting urban runoff as a critical pathway for microplastic transport. The study concludes with recommendations for improving waste management practices, enhancing public awareness and engagement in plastic recycling efforts, and implementing policies aimed at reducing the production and use of single-use plastics. This research underscores the urgent need for coordinated actions to mitigate the pervasive issue of microplastic pollution, highlighting the role of urban management and policy interventions in safeguarding marine ecosystems.

As a vital component of the terrestrial ecosystem, grassland accounts for one-third of the global vegetation system. Grassland degradation has been exacerbated due to extreme overgrazing in China's Inner Mongolia Autonomous Region (IMAR). While conservation was carried out as the Ecological Subsidy and Award Program (ESAP) to mitigate grassland degradation, little is known about its effectiveness in improving the biophysical conditions of grassland. This paper integrates the conceptual frameworks of total socio-environmental systems to assess how ecological systems respond to ESAP, investigate spatial heterogeneity of ESAP, and explore the meddling effects of socio-environmental interactions on ESAP. We integrate ecological, climate, and socioeconomic data and developed several hierarchical linear mixed models (HLMM) to investigate how these factors interact with ESAP in IMAR. Our findings prove that the above-ground biomass between 2011 and 2015 responds significantly to variations in socioeconomic conditions and ecological communities. Available land resources, hospital and medical facilities, and net farmer and herdsman income are the most critical factors contributing to grassland productivity. Primary industries like mining, total consumer retail value, farming, forestry, animal husbandry, fishery productions, and GDP are the most damaging factors affecting biomass. Our study recommends a regionally or locally tailored ecological recovery policy, instead of a generalized one, in the future effort to conserve grassland.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

This paper adopts a systems firm-centered perspective on the environmental assessment of recyclable glass and PET soft drink containers. We employ LCA and discrete-event simulation modelling for the environmental assessment of the two soft drinks packaging alternatives in operational terms, over the entire supply chain, over a period of three years. The assessment is based on real data collected from a large soft-drinks producer and its suppliers. The research and practice contribution of the paper is twofold: first, it introduces a methodological framework for environmental assessment of companies’ packaging environmental impact under different product and operations strategies, and secondly, it provides a holistic environmental assessment of the two packaging materials (PET and glass) taking into account specific operational issues, such as product mix and recycling and reuse options, and activity interdependences and stochasticity. The results of the simulation experiments confirm at system level, for glass, the importance for sustainability, to increase the number of reuse cycles and the percentage of used bottles collected for refilling, whereas for PET, to increase the percentage of recycled PET in new bottles.

The backwater lowland habitats of large rivers, like the Mississippi River in North America, present complex often inaccessible environments for traditional capture-based fish biodiversity sampling. Our knowledge of the assemblages of fishes that occupy such habitats are often incomplete, and this can compromise management efforts. We employed environmental DNA (eDNA) metabarcoding methods to sample a Mississippi River bottom wetland system to assess ichthyofaunal diversity, and assemblage structure across habitat types, and we compared our results to capture-based survey records for the same habitats. We collected water samples in spring and fall of 2022 from slough, ditch, shallow lake and bayou habitats that varied in depth, vegetation, seasonal variability, and connectivity to the Mississippi River channel. We detected a diverse array of fish species that included 51 taxa. Nearly all species previously documented in the habitats were detected by eDNA metabarcoding, and we increased the number of documented species by more than a third. Most of the species were ubiquitous across the range of habitats, but there was also substantial assemblage structure, with some species exhibiting clear habitat specificity. Fall sampling was limited to the deeper bayou habitats where seasonal variation between spring and fall was minimal. eDNA metabarcode sampling was demonstrated to be effective at detecting invasive species as well as uncommon species, which included several species of conservation concern.

Membrane gas absorption technology has been considered as a promising approach to mitigate CO2 emissions from power plants. The aim of this study is to evaluate the environmental impacts of CO2 absorption and desorption processes by hollow fiber membrane contactors using life cycle assessment methodology. On the basis of ReCipe 2016 Midpoint and ReCipe 2016 Endpoint methods, the research results show that, membrane gas absorption system exhibits the lowest environmental impacts across the majority assessed categories in comparison with chemical absorption and membrane gas separation systems. The CO2 capture process via membrane gas absorption has the most significant impact on METP category, with heat consumption as the primary contributing factor accounting for 55%, followed by electricity consumption accounting for 43.1%. According to the sensitivity analysis, heating by natural gas shows a better performance than other heat supply sources in improving overall environmental impacts. In addition, the increasing utilization of renewable energy in electricity supply reduces the global warming potential, fossil resource consumption and ozone formation.

Heavy metal pollution poses a significant threat to global populations, particularly impacting human health. Developing countries, characterized by chemical engineering and mining industrial activities, often contribute to diverse heavy metal contaminants. Consumption of water contaminated with heavy metals, prevalent in such regions, can lead to severe health risks, including gastric cancer. Addressing the urgent issue of heavy metal pollution, this paper employs a bibliographic approach to explore the latest literature on heavy metal pollution. The study discusses recent research findings and potential methods for the treatment and mitigation of heavy metal pollution, emphasizing the pressing need for effective solutions to safeguard public health.

Structural health monitoring (SHM) has become paramount for developing cheaper and more reliable maintenance policies. The advantages coming from adopting such process have turned out to be particularly evident when dealing with plated structures. In this context, state-of-the-art methods are based on exciting and acquiring ultrasonic guided waves through a permanently installed sensor network. A baseline is registered when the structure is healthy, and newly acquired signals are compared to it to detect, localize and quantify damage. To this purpose, the performance of traditional methods based on tomographic algorithms has been overcome by machine learning approaches, which allow processing a larger amount of data without losing diagnostic information. However, to date, no diagnostic method can deal with varying environmental and operational conditions. This works aims to develop a framework for mitigating the impact of temperature variations on ultrasonic guided wave-based SHM through generative artificial intelligence. A variational autoencoder and singular value decomposition were combined to learn the influence of temperature on guided waves. After training, the generative part of the algorithm was used to reconstruct signals at new unseen temperatures. Moreover, a refined version of the algorithm called forced variational autoencoder was introduced to further improve the reconstruction capabilities. The accuracy of the proposed framework was demonstrated against real measurements on a composite plate.

Abstruct Green Human Resource Management (GHRM) has emerged as an essential strategy for achieving environmental sustainability within organizations. However, there remains a significant gap in understanding its direct impact on sustainable performance. This study seeks to address these gaps by investigating the relationship between GHRM and sustainable performance, with a focus on the mediating role of green innovation and the moderating influence of transformational leadership. A cross-sectional study was conducted among Malaysian small and medium-sized enterprises (SMEs) to explore the interrelationships between Green HRM, green process and product innovation, sustainability, and the role of sustainable leadership. The study's findings reveal a positive and significant relationship between green HRM practices and sustainability, encompassing environmental, economic, and social aspects. The findings suggest that management support for environmental initiatives is a critical factor in enhancing the effectiveness and spread of green innovations, emphasizing the importance of GHM in the broader context of organizational change and sustainability. In addition, the study underscores the critical role of transformative leadership in fostering sustainable practices, particularly the significant moderator role of responsible leadership in driving sustainable business practices. In summary, this study provides a roadmap for businesses, particularly SMEs, to leverage HGRM as a strategic tool in their pursuit of sustainability.

This review explores the transformative impact of sensor technologies in early disease detection. It highlights recent advancements in nanotechnology-based sensors, particularly focusing on their applications in identifying disease biomarkers at early stages. The integration of these sensors with artificial intelligence for predictive analytics in healthcare is also discussed. Applications in cancer, infectious diseases, and chronic disease management underscore their diverse utility. Challenges in sensor technology adoption and future directions, including multiplexed sensors and wearable devices, are examined. This review underscores sensors' potential in enhancing disease management and patient outcomes.

Microplastic contamination, defined as plastic particles less than 5 mm in size, has become a major global environmental concern. This study synthesizes findings from carefully chosen studies undertaken in a variety of geographical areas and ecosystems, offering light on the multifaceted issues posed by microplastic pollution. These articles show the global prevalence of microplastics in both land and marine ecosystems. Seasonal fluctuations in microplastic abundance highlight the cyclical nature of this pollution, with larger amounts being reported during the summer months. Tourism, industrialization, and urbanization have all been highlighted as significant contributors to microplastic contamination, stressing the impact of man-made influences. Wastewater treatment plants (WWTPs) have been identified as hotspots for microplastic release into aquatic habitats, emphasizing the need for enhanced treatment procedures. Because microplastics can build up in the food chain, it underlines the possible health problems connected with microplastic pollution for both aquatic creatures and human consumers. Longitudinal studies, geographical variety, in-depth health and ecological impact evaluations, standardization, and effective mitigation methods should be prioritized in future studies. To address this worldwide issue, interdisciplinary collaboration among scientists, health professionals, politicians, and industrial stakeholders is required.

Background Scientific literature in psychology considers personality as an organization of ways of being, knowing, and acting that ensures unity, coherence and continuity, stability and planning of the individual's relations with the world (Caprara & Gennaro, 1994). Personality is the outcome of two distinct constructs: Temperament and Character. So, personality is the result of the interaction between biological aspects (temperament) and the experiences that anybody experiences in his own life, interacting with the environment (Cloninger et al., 1993). Scientific literature now largely agrees that adversity in the early years of life has broad long-term consequences on the neuroendocrine, immune, and metabolic systems (Kim et al., 2019), as well as on neuroplasticity and neuronal morphology that alter the overall evolution of (van Bodegom, et al., 2017; Edwards et al., 2010). Here we analyze the hypothesis that maternal environmental factors (air and chemical pollutants, maternal health, eating behaviors, maternal and fetal stresses, caregivers' behaviors, etc.) can cause epigenetic alterations in the offspring in the prenatal and perinatal period that shape the trait's personality of the offspring themselves and that orient part of their character in adult life. Methods The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement was used to develop this systematic review. PubMed, Scopus, PsycINFO, and Biosis databases were searched for primary research articles published between 2010 and 2023 looking for English language articles containing the term "prenatal" and any of the following terms: "anxiety"; "brain development"; "depression"; "gestation"; "maternal health"; "maternal stress"; "mental health"; "newborn health"; "perinatal programming"; "pregnancy"; "prenatal stress"; "resilience to stress"; "transgenerational epigenetic inheritance"; "personality"; "personality trait"; "environmental epigenetics". Retrieved articles were screened and a subset of relevant abstracts was then selected for a more detailed evaluation. The final studies selected consisted of those resources that directly evaluated the relationship between maternal environmental factors and the personality traits of the offspring. Results and Conclusions One hundred and eleven studies were identified but only three met the primary question. There is evidence to support the hypothesis of correlations between environmental exposure during the intrauterine fetal period and personality traits of the newborn. Limits: multiple limitations were found based on the lack of research on this specific topic, although such a field of research can be important for developing effective strategies for primary prevention.

Traffic congestion is a persistent and challenging problem in urban areas, leading to increased travel times, fuel consumption, and environmental pollution. Signalized intersections play a pivotal role in regulating traffic flow, and their efficiency has a direct impact on the overall traffic performance of a city. This study investigates the effect of traffic signal in managing traffic volume and reducing congestion and delays at signalized intersections through a comprehensive analysis of existing research, data collection, and simulations.The research begins by analyzing the traffic characteristics by an installed LiDAR sensor at E Cold Spring Ln – Hillen Rd intersection in Baltimore City, MD. When the signal at this intersection stopped working for some hours during a working day in September 2023, the LiDAR recorded vehicle and pedestrian counts, vehicle-vehicle and vehicle-pedestrian conflicts, and jaywalking events conflicts. The research aims to assess the impact of traffic signal failures on traffic flow, congestion, safety (V2V and V2P conflicts), and the frequency of jaywalking events before, during, and after improper performance of the traffic signal. Furthermore, this study explores the factors influencing traffic signal performance, including traffic demand, geometric layout, pedestrian interactions, and the integration of emerging technologies. The analysis results highlighted the importance of signal control systems existence at this intersection that can adjust signal timing in response to changing the real-time traffic conditions.Reduced congestion, minimized delays, and enhanced traffic flow are observed outcomes, contributing to a more sustainable and efficient urban transportation system. However, it is crucial to consider the trade-offs and challenges associated with traffic signal optimization, such as the potential for increased travel times for certain modes of transportation and the need for ongoing maintenance and updates. In conclusion, this study underscores the pivotal role of traffic signals in managing traffic volume and reducing congestion and delays at signalized intersections. Through evidence-based analysis and innovative signal control strategies, urban planners and transportation authorities can work towards creating more efficient, sustainable, and less congested transportation networks. The insights derived from this research can inform policy decisions and guide the development of future traffic management solutions, ultimately leading to improved quality of life in urban areas.