Despite being stored at 113 K and atmospheric pressure, LNG cold potential is not exploited to reduce green ships’ energy needs. An innovative system based on three Organic Ranking Cycles integrated into the regasification equipment is proposed to produce additional power and recover cooling energy from condensers. A first-law analysis identified ethylene and ethane as suitable working fluids for the first and the second ORC making available freshwater and ice. Propane, ammonia and propylene could be arbitrarily employed in the third ORC for air-conditioning. An environmental analysis that combines exergy efficiency, ecological indices and hazard aspects for marine environment and ship’s passengers, indicated propylene as safer and more environmentally friendly. The exergy analysis confirms more than 20% of the LNG potential can be recovered from every cycle to produce a net clean power of 76 kW, whereas 270 kW can be saved by recovering condensers' cooling power to satisfy some ship needs. Assuming the sailing mode, a limitation of 162 kg in LNG consumptions was determined, avoiding the emission of 1584 kg of CO2 per day. Marine thermal pollution is reduced by 3.5 times by recovering the working fluids' condensation heat for the LNG pre-heating.

Wastewater-Based Epidemiology (WBE) is currently used to monitor not only the spread of the pandemic virus SARS-CoV-2 but also for other viruses in endemic conditions, particularly in the absence of syndromic surveillance. Continuous monitoring of sewage requires high costs and significant time investment, highlighting the need for standardized methods and structured monitoring strategies. In this context, we conducted weekly wastewater monitoring in northwestern Italy, targeting Human Adenovirus (HAdV), Norovirus Genogroup II (NoVggII), Enterovirus (EV), and SARS-CoV-2. Samples collected at the entrance of treatment plants were concentrated using PEG/NaCl precipitation and viral nucleic acids were extracted and detected by real-time (RT-)qPCR. NoVggII resulted the most identified target (84.4%), followed by HAdV, SARS-CoV-2, and EV. Only HAdV and EV exhibited seasonal peaks in spring and summer. SARS-CoV-2 results compared with data previously collected in the same study area (February 2021 to September 2021) revealed a shift from an epidemic to a pandemic status, likely due to the evolution of variants. In conclusion, WBE, using standardized methods and an efficient monitoring strategy, proves valuable for virus surveillance in pandemic and epidemic scenarios, enabling the identification of temporal-local distribution patterns that are useful for making informed public health decision.

This study investigates the influence of economic growth on CO2 emissions levels in three developed countries—Argentina, Equatorial Guinea, and South Korea—based on their status as high-income countries. We test the environmental Kuznets curve (EKC) hypothesis using the time series approaches to check the relationship and direction of causality among the variables over a sample spanning 1974–2020. The results show an inverted U-shaped short-run relationship in all three countries. In the long run, only South Korea supports the EKC hypothesis. Further, Granger causality results indicate the existence of causality. These long-run causal relationships between economic growth and emissions recommend one policy implication that wealthy governments must expand investments in renewable clean energy projects and R&D, with regulatory measures to suppress harmful environmental procedures and support environmentally friendly development.

Education on native tree species using indigenous knowledge systems is crucial in elementary school environmental education because it sensitizes learners on the significant roles played by the native trees and their interconnections with their culture and existence. Unfortunately in Ghana, there is no pedagogical model that would aid elementary school teachers in carrying out such education.This study was aimed at developing, implementing and evaluating an indigenous knowledge inspired pedagogical model for native tree education among elementary school learners in Ghana. The convergent parallel mixed methods design that aimed at collecting quantitative and qualitative datasets on the development and evaluation of the developed pedagogical model. The results show that the pedagogical model was deemed very satisfactory in all its aspects for native tree education among elementary school learners in Ghana. The model was able to assist in developing the sustainability consciousness and competence of elementary school learners toward caring for native trees through tree planting, making of nurseries and gardens, and engaging in native tree conservation campaigns. The study recommends that the Ministry of Education should adopt, improve and widely disseminate the pedagogical model and help in its broader implementation in various elementary schools across the country.

The study presents an efficient computational investigation on the behaviour of the direct-drive system integrated into the offshore 5MW NREL wind turbine model under demanding aerodynamic loading conditions with the aim of optimising and developing more sustainable key structural components. The research was based on computational simulation packages to verify the use of real-world wind data, the loading conditions on the blade structures through aero-elastic simulation studies, as well as analyse the behaviour of the drive system. Through the application of validated aerodynamic loading conditions, resulting normal forces on the blades structure were obtained and applied to a dedicated simplified model that was also previously validated, to estimate the transferred loads into the powertrain. The adopted methodology allowed for the identification of shaft misalignment induced air-gap eccentricity. The impact of shaft deflections on resulting magnetomotive force was considered by making use of the Maxwell stress distribution expression. By taking into account the resulting loading cases on the generator structure, as well as the inherent typical loads generated by the electrical machine, a procedure including structural parametric and topology optimisation was developed and performed, achieving a rotor mass reduction between 8.5 and 9.6% if compared with the original model.

Despite air pollution being a leading cause of health issues in developing nations, public awareness and understanding of local air quality remains notably low. The present study assesses the perception, attitude, and environmental knowledge of local air pollution among adult urban residents (n=870) in a city with leading air pollution rates among cities of emerging economies: Astana, Kazakhstan. Structural equation modeling (SEM) was employed to investigate the causal relationship between perceived air quality, environmental literacy, and willingness to pay (WTP) for environmental protection. Findings indicate over 40% of residents neither consider the city being highly polluted nor recognize the association between air quality and adverse health outcomes, correlated with a generally low level of environmental literacy. The age, education, and health status of the participants significantly affected (p<.001) their level of environmental knowledge and awareness. The SEM analysis indicates that knowledge is the major determinant in improving public awareness and perception of local air pollution (path value=0.626). Moreover, a close association between WTP and environmental attitude was also evident (path value=0.533). The findings of the present study may provide valuable insights for healthcare professionals, environmental researchers, and governmental institutions for implementing more effective public interventions to protect local air quality.

This comprehensive critical review shows how green buildings and energy optimization solutions improve indoor air quality as well as environmental quality (IEQ) and human health. Electricity-efficient green buildings create a better indoor atmosphere and save electricity. Green buildings improve occupant well-being through IAQ, thermal comfort, acoustics, and lighting. Renewable energy, green construction materials, and intelligent technologies increase sustainability and reduce environmental impact. Environmental hazards, architectural design, and societal variables can improve indoor air quality and subsequently reduce health risks linked with poor air quality. The evaluation highlights the pros and cons of low-cost IAQ sensors and equipment. These devices provide valuable insights, but calibration and validation using reference equipment are necessary to ensure accuracy and reliability. Architects, engineers, environmentalists, and policymakers are essential in creating green buildings with high IEQ. Prioritizing occupant comfort, health, and productivity ensures a sustainable and healthy future for future generations. However, continual monitoring and research are needed to improve green building practices and overcome construction problems. Intelligent models for continual on-field calibration of low-cost sensors may improve performance. Green buildings benefit occupants and the environment by optimizing energy use and using IAQ monitoring technologies.

Organophosphate pesticides (OPs) are toxic substances that contaminate aquatic environments, interfere with the development of the nervous system, and induce Neurodevelopmental Toxicity (NDT) in animals and humans. The canonical mechanism of OP neurotoxicity involves the inhibi-tion of acetylcholinesterase (AChE), but other mechanisms non-AChE are also involved and not fully understood. We used network toxicology and molecular docking to identify molecular targets and toxicity mechanisms common to OPs. Targets related to diazinon-oxon, chlorpyrifos oxon, and paraoxon OPs were predicted using the Swiss Target Prediction and PharmMapper databases. Targets related to NDT were compiled from GeneCards and OMIM databases. In order to construct the protein-protein interaction (PPI) network, the common targets between OPs and NDT were imported into the STRING. Networks topological analyses identified EGFR, MET, HSP90AA1, and SRC as hub nodes common to the three OPs. Using Reactome pathway and gene ontology we found that signal transduction, axon guidance, cellular responses to stress, and glutamatergic signaling activation play key roles in OP-induced NDT.

To date, only a few studies focused on carbon monoxide (CO) production during waste composting; all targeted on CO inside piles. Here, the CO net emissions from compost piles and the assessment of worker’s occupational risk of exposure to CO at large-scale composting plants are shown for the first time. CO net emissions were measured at two plants processing green waste, sewage sludge, or undersize fraction of municipal solid waste. Effects of the location of piles (hermetised hall vs. open yard) and turning (before vs. after) were studied. Higher CO net emission rates were observed from piles located in a closed hall. The average CO flux before turning was 23.25 and 0.60 mg‧m-2‧h-1 for hermetised and open piles, respectively, while after – 69.38 and 5.11 mg‧m-2‧h-1. The maximum CO net emissions occurred after the compost was turned (1.7x to 13.7x higher than before turning). The top sections of hermetised piles had greater CO emissions compared to sides. Additionally, 5% of measurement points of hermetised piles switched to ‘CO sinks’. The 1-h concentration in hermetised composting hall can reach max. ~50 mg CO∙m-3 before turning, and >115 mg CO∙m-3 after, exceeding the WHO thresholds for a 1-h and 15-min exposures, respectively.

Temporary streams are a key component of the hydrological cycle in arid and semi-arid regions, but their flow is highly variable and difficult to measure. In this paper, we present a novel approach that could be used to assess the flow of temporary streams and characterize their environmental status. Specifically, we apply the Image Velocimetry method to estimate surface velocity in temporary streams using unmanned aerial vehicles (UAVs) equipped with optical sensors (IV-UAV method). The IV-UAV method enables the easy, safe and quick estimation of the velocity on the water’s surface. This method was applied in different temporary streams in Lesvos Island, Greece. The produced results show that the IV-UAV can be implemented at low discharges, at temporary streams and at small streams. However, there were many occasions that measurements were unable due to various reasons such as dense vegetation or archaeological sites. Despite of this, the proposed methodology could be incorporated in optical protocols which are used to assess the environmental status of temporary streams of Mediterranean conditions. Finally, this would become a valuable tool for understanding the dynamics of these eco-systems and monitoring changes over time.

The sustainable metabolic engineering (SME) concept was defined by Stalidzans and Dace as an approach for the selection of most sustainable metabolic engineering designs taking the economic, environmental and social components of sustainability into account. In the centre of sustainability calculations is a genome scale metabolic model that provides full balance of all incoming and outgoing metabolic fluxes at steady state. Therefore, sustainability indicators are assigned for each exchange reaction enabling calculation of sustainability features of consumption or production of each metabolite. The further development of the SME concept depends on its implementation at the computational level to acquire applicable results – sustainable production strain designs. This study proposes for the first time a workflow and tools of SME implementation using constraint based stoichiometric modelling, genome scale metabolic models and growth coupled product synthesis approach. For SME application demonstration purposes, a relatively simple engineering task has been carried out. The most sustainable designs have been identified using Escherichia coli as chassis organism, glucose as a substrate and gene deletions as metabolic engineering tool. A growth coupled production design tool has been used to reduce the variability of sustainability. The 10 000 most sustainable designs were producing succinate as the main product with the number of deleted genes ranging from two to ten. A big number of similar designs has been identified due to the combinatorial explosion of different alternative combinations of gene deletion sets that result in interruption of the same metabolic pathways with the same impact on the metabolism.

In this age of global warming, academics and policymakers are increasingly concerned about firm environmental sustainability success. Therefore, this study aims to investigate whether Environmental, Social and Governance (ESG) performance impacts sustainability performance through the mediating effect of firm innovation. To this end, Structural Equation Modeling (SEM) was deployed to analyze data collected from the employees of manufacturing industries in an emerging economy like Bangladesh. The results revealed that ESG performance significantly enhances the innovation and sustainability performance of manufacturing industries, indicating that the higher the ESG performance of a firm, the greater its innovation and sustainability performance. Furthermore, the results confirmed that firm innovation performance fully mediates the relationship between ESG initiatives and sustainability performance. The findings of this study provide policymakers and industry authorities with valuable insight into the role of ESG and innovation performance in improving sustainability performance. Specifically, the study sheds knowledge on how firm ESG initiatives and innovation performance impact sustainability performance in the manufacturing sector of an emerging economy like Bangladesh.

Cellular Vehicle-to-Everything (C-V2X) is a communication technology that supports various safety, mobility, and environmental applications given its higher reliability properties compared to other communication technologies. The performance of these C-V2X-enabled Intelligent Transportation System (ITS) applications is affected by the performance of the C-V2X communication technology (mainly packet loss). Similarly, the performance of the C-V2X communication is dependent on the vehicular traffic density which is affected by the traffic mobility patterns, and vehicle routing strategies. Consequently, it is critical to develop a tool that can simulate, analyze, and evaluate the mutual interactions of the transportation and communication systems at the application level and to the evaluate the benefits of the C-V2X enabled ITS applications. In this paper, we demonstrate the benefits gained when using C-V2X Vehicle-to-Infrastructure (V2I) communication technology in an energy-efficient dynamic routing application. Specifically, we develop a Connected Energy-Efficient Dynamic Routing (C-EEDR) application using C-V2X as a communication medium in an integrated vehicular traffic and communication simulator (INTEGRATION). The results demonstrate that the C-EEDR application achieves fuel savings of up to 16.6% and 14.7% in the IDEAL and C-V2X communication cases, respectively for a peak hour demand on the downtown Los Angeles network considering a 50% level of market penetration of connected vehicles. The results demonstrate that the fuel savings increase with increasing levels of market penetration at lower traffic demand levels (25% and 50% the peak demand). At higher traffic demand levels (75% and 100%) the fuel savings increase with increasing levels of market penetration with maximum benefits at a 50% market penetration rate. Although the communication system is affected by the high density of vehicles at the high traffic demand levels (75% and 100% the peak demand), the C-EEDR application manages to perform reliably producing system-wide fuel consumption savings.The C-EEDR application achieves fuel savings of 15.2% and 11.7% for the IDEAL communication and 14% and 9% for the C-V2X communication at the 75% and 100% market penetration rates, respectively. Finally, the paper demonstrates that the C-V2X communication constraints only affect the performance of the C-EEDR application at the full demand level when the market penetration of connected vehicles exceeds 25%. This degradation, however is minimal (less than a 2.5% reduction in fuel savings).

The threat posed by climate change, the progressive erosion of natural resources, the polluting effects related to private motorization, energy waste, excessive consumption of agricultural and natural soils and their progressive waterproofing and reduction in vegetation cover, with the subsequent environmental degradation, have highlighted the need for a sustainable management of natural resources, in terms of an equitable and ethical development, to build inclusive communities able to adapt to the negative effects of emergency phenomena, through new capacities of economic, cultural and social resilience. This contribution presents the results of the activities conducted in the RivEr/Generation_LAB, a project organized by three CIVIS members (Sapienza University of Rome, Universitè libre de Bruxelles, Universidad Autonoma de Madrid) as a part of the CIVIS Project "RivEr/Generation_LAB. Linking resilience with inclusiveness in the urban built environment of Rome, Brussels, and Madrid", financed into the Hub4 Cities, Territories & Mobilities’ Call for proposals 2021. The project proposes a methodology of intervention in the Flaminio district, in particular on the 'Olympic Village' and its relationship with the Tiber River, in line with the Sustainable Development Goals, the Millennium Ecosystem Assessment and the New European Bauhaus, to establish new relationships between cities and the natural environment, favouring sustainable and inclusive public spaces.

Innovations in industrial automation, information and communication technology (ICT), renewable energy, monitoring and sensing fields have been paving the way for smart devices, which can acquire and convey information to the internet, in every aspect of our lives. Since there is ever-increasing demand for large yet affordable production volumes for such devices, printed electronics has been attracting great attention in both industrial and academic research. In order to understand the potential and future prospects of the printed electronics, the present paper summarizes the basic principles and conventional approaches while providing the recent progresses in the fabrication and material technologies, applications and environmental impacts.

The rapidly expanding corona pandemic in 2020 brought the world to virtual economic stagna-tion. While the impact on the environment from suspended air traffic, idle industry and economic lockdown has been considerable, so have the economic and social consequences of the crisis. To make matters worse, the resulting state of stagnation is neither economically nor socially sustaina-ble. Nevertheless, we need to ask ourselves what we can learn from the situation in order to ex-plore the benefits of globalization, intercept similar crisis situations more effectively in the future and move towards more sustainable development on an ecological, economic and social level. This paper identifies the areas of expanded externality management needed to further improve environmental quality, digitalization, network expansion and basic income. These central issues need to be addressed both during and after the crisis in order to deal with problems of inequality and climate change mitigation for current and future generations. Concrete concepts will be put forward and discussed in the paper.

Community-level wastewater monitoring for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA has demonstrated useful correlation with both coronavirus disease 2019 (COVID-19) case numbers and clinical testing positivity. Wastewater monitoring on college campuses has demonstrated promising predictive capacity for the presence and absence of COVID-19 cases. However, to date, such monitoring has largely relied upon composite or grab samples and reverse transcription quantitative PCR (RT-qPCR) techniques, which limits the accessibility and scalability of wastewater monitoring. In this study, we piloted a workflow that uses tampons as passive swabs for collection and reverse transcription loop-mediated isothermal amplification (RT-LAMP) to detect SARS-CoV-2 RNA in wastewater. Results for the developed workflow were available same day, with a time to result following tampon swab collection of approximately three hours. The RT-LAMP 95% limit of detection (76 gene copies reaction-1) was greater than RT-droplet digital PCR (ddPCR; 3.3 gene copies reaction-1). Nonetheless, during a building-level wastewater monitoring campaign conducted in the midst of weekly clinical testing of all students, the workflow demonstrated a same-day positive predictive value (PPV) of 33% and negative predictive value (NPV) of 80% for incident COVID-19 cases. The NPV is comparable to that reported by wastewater monitoring using RT-qPCR. These observations suggest that even with lower analytical sensitivity the tampon swab and RT-LAMP workflow offers a cost-effective and rapid approach that could be leveraged for scalable same-day building-level wastewater monitoring for COVID-19.

Fundamental principles of modern cities and urban planning are challenged during the COVID-19 pandemic, such as the advantages of large city size, high density, mass transport, free use of public space, unrestricted individual mobility in cities. These principles shaped the development of cities and metropolitan areas for more than a century, but currently, there are signs that they have turned from advantage to liability. Cities Public authorities and private organisations responded to the COVID-19 crisis with a variety of policies and business practices. These countermeasures codify a valuable experience and can offer lessons about how cities can tackle another grand challenge, this of climate change. Do the measures taken during the COVID-19 crisis represent a temporal adjustment to the current health crisis? Or do they open new ways towards a new type of urban development more effective in times of environmental and health crises? We address these questions through literature review and three case studies that review policies and practices for the transformation of city ecosystems mostly affected by the COVID-19 pandemic: (a) the central business district, (b) the transport ecosystem, and (c) the tourism-hospitality ecosystem. We assess whether the measures implemented in these ecosystems shape new policy and planning models for higher readiness of cities towards grand challenges. And how, based on this experience, cities should be organized to tackle the grand challenge of environmental sustainability and climate change.

Investors are currently obliged to take ESG (Environment, Social, Governance) issues into consideration as part of their fiduciary duty. As such, it becomes increasingly important to identify sustainable investments that hold financial value as well. A sector where this is especially underdeveloped is real estate. This has a lot to do with the obfuscated conceptualization of ESG. The article identifies key gaps in literature and practice, and provides a framework to further the understanding of how ESG factors can add societal and financial value in the real estate sector. A key premise of the article is that the user in the building is grossly overlooked. Drawing on insights from behavioral social science and environmental psychology, the paper explains the role of the user in improving buildings’ ESG, also taking into account the investment value. To conclude, the article makes the case that the transition to user-centered smart real estate is the solution to improving both the environmental (E) and social (S) sustainability of buildings, as well as their investment value. Therefore, practitioners and academics are encouraged to critically evaluate and contextualize the ESG framework they are using, as well as the extent to which users are considered and smart technology is employed.

Due to their unique properties, perfluorinated substances (PFAS) are widely used in multiple industrial and commercial applications, but they are toxic for animals, humans included. This review presents some available data on the PFAS environmental distribution in the world, and in particular in Europe and in Veneto region of Italy, where it has become a serious problem for human health. The consumption of contaminated food and drinking water is considered one of the major source of exposure for humans. Worldwide epidemiological studies report the negative effects that PFAS have on human health, due to environmental pollution, including infertility, steroid hormone perturbation, thyroid, liver and kidney disorders and metabolic disfunctions. In vitro and in vivo researches correlated PFAS exposure to oxidative stress effects (in mammals as well as in other vertebrates of human interest), produced by a PFAS-induced increase of reactive oxygen species formation. The cellular antioxidant defense system is activated by PFAS, but it is only partially able to avoid the oxidative damage to biomolecules.

The science‐policy interface in climate change adaptation became better managed over the past decades. However, the scientists and other knowledge producers, as well as policy makers still need to take bolder steps to more effectively engage with others to apply science and shape up policies. This paper aims to provide practical recommendations, intended to promote conversations between science and policy sectors to address climate change issues. Here, I used two different approaches to synthesize experiences and identify recommendations: a literature review and a case study. The paper stress main findings: (1) The linear communication model is still commonly involved in the science - policy dialogue and proved to be useful to increase the relevance of science and data products to decision makers. (2) When a gap between knowledge producer and knowledge user or decision maker exists, the need for a third party to specialize in bridging the gap become essential. (3) Indigenous people and knowledge must be involved in adaptation policy making based on legitimation local and traditional knowledge, designing the consultation process to broadly engage local and indigenous people, facilitating meaningful dialogues between traditional knowledge and science, and developing initiatives to strengthen skills and capacity of indigenous communities.

The military areas in Sardinia are around 234 km2, which constitutes 59.97% of the national surface affected by military easements. This situation is due to its geographic centrality in the Mediterranean. This contribution evaluates the performance of the Local Coastline Plan (LCP) and the Site Management Plan of Community Interest (SCI) in conditions of military constraint. The case study is the Municipality of Villaputzu where an important coastal military easement and the use of the coast for recreational tourism purposes coexist together through specific planning, a consequence of institutional agreements between the Municipal Administration of Villaputzu and the Ministry of Defense. The evaluation of the congruence of the specific objectives of the LCP and the SCI shows how their combined action favors the environmental enhancement of Sardinia, contributing to the formation of ecosystem services, even in particular conditions arising from military easements. These are sites that pass from the status of "anti-commons" to "semi-commons". In fact, the military release process in Sardinia, together with the promiscuous military and civil use, activates unique governance policies of their kind that find a significant field of application in Sardinia to guarantee a sustainable renewal of economic development of the ‘semi-commons’ awaiting to become ‘commons’

Organizations can play a significant role in the advancement of Sustainable Development, and companies with Quality, Environmental and Occupational Health and Safety (QEOHS) certified management systems address the three Sustainability Dimensions (economic, environmental and social). This research aims to map the present level of engagement of those companies in contributing and reporting to the 17 Sustainable Development Goals of The United Nations 2030 Agenda. The content of companies reports (available in web sites, by 31 December 2017) of a total of 235 Portuguese organizations with QEOHS certified management systems, was analyzed. The results show a moderate reporting of SDGs by those companies, with the top five being SDG 12 - Responsible consumption and production (23.8%), SDG 13 – Climate action (22.1%), SDG 09 - Industry, innovation, and infrastructure (21.3%), SDG 08 - Decent work and economic growth (20.0%) and SDG 17 - Partnerships for the goals (19.6%). The results of the statistical tests indicate that the communication of SDGs is more prominent in organizations (QEOHS) with higher business volume, that are members of the United Nations Global Compact Network Portugal, and that disclose their sustainability reports on their web site. This study can be useful for decision-makers that aim to support organizations to contribute to the Sustainable Development Goals.

The purpose of this paper is to explore the presence of spatial and temporal effects on the calls for noise disturbance service reported to the Local Police of València (Spain) in the time period from 2014 to 2015, and investigate how some socio-demographic and environmental variables affect the noise phenomenon. The analysis is performed at the level of València's boroughs. It has been carried out using a logistic model after dichotomization of the noise incidents variable. The spatial effects consider first and second order neighbours. The temporal effects are included in the model by means of one and two weeks temporal lags. Our model confirms the presence of strong spatio-temporal effects. We also find significant associations between noise incidence and specific age groups, socio-economic status, land uses and recreational activities, among other variables. The results suggest that there is a problem of ``social'' noise in València that is not exclusively a consequence of coexistence between local residents. External factors such as the increasing number of people on the streets during weekend nights or during summer months increase severely the chances of expecting a noise incident.

The objective of this paper was to give an overview of the expressed preference (EP) techniques of environmental valuation. These methods offer estimation of the value of a resource not necessarily willingness to pay (WTP) or willingness to Accept (WTA) compensation rather upper and lower values. The method of measuring individuals’ willingness to pay is usually based on contingent valuation method (CVM). This research focuses on defining, categorizing, and applicability of various environmental valuation techniques that have been and can be applied in attaching value to a given resource using expressed/Revealed preference methods. The study serves as a supplementary synthesis and discussion to the board of knowledge of resource valuation methods. More specifically, selected methods to discussed herein include; contingent valuation method, hedonic pricing model, travel cost method, trade-off game method, the costless-choice method, Delphi method, Replacement Cost Method, Relocation Cost Method, Opportunity cost method, and Cost-benefit Method. In the last part, applicability of the methods is fully illustrated to support future studies on resource valuation.

Consumption guidelines are a common way to improve conscious consumption behaviors in areas where game fish are known to contain contaminants. However, guideline information can be difficult to distribute, and effectiveness difficult to measure. To increase the distribution and effectiveness of guideline information for the Detroit River, an educational campaign was launched in 2010, which included distribution of pamphlets with consumption information, posting of permanent signs at popular fishing locations, and hiring River Walkers to personally communicate with anglers. In 2013 and 2015, we conducted in-person surveys of active shoreline anglers to determine the effectiveness of education and outreach efforts. Results from the survey indicated that 55% of anglers were aware of the guidelines in 2013, and by 2015 36% had communicated the information to family or friends. However, anglers were often unwilling to reduce consumption of popular game species, despite high contaminant levels. Encouragingly, black anglers were most likely to supplement their diet with species lower in contaminants. Our results suggest that utilizing multiple educational strategies including reaching out directly to individual anglers may improve conscious consumption behavior among the targeted population, providing a template for educational campaigns to successfully target vulnerable populations.

Various environmental challenges, related to oil palm commodity has became a major environmental challenge to oil palm production. The aim and objective of this study is to analyze the actual water footprint of oil palm based on root water uptake under varying crop age and soil type. The research was conducted in Pundu Village, Central Kalimantan. The methodology adopted in carrying out this study consists of various stages which includes observing soil moisture, rainfall, and water table, ETo, root water uptake and oil palm water footprint. The highest rate of water consumption was the 13 years oil palm on spodosol soil type with an average daily rate of 3.73 mm/day. The lowest evapotranspiration was represented by the 7th year oil palm on spodosol with an average rate of 3.07 mm/day. The total water footprint value obtained was between 0.56 – 1.14 m3/kg for a variety of plants with various age and soil types. It can be deduced that the water footprint value of oil palm vary for different crop age and soil types on temporal scale. The study also presented that the source of green water from the first root zone of oil palm deliver the highest contribution for oil palm root water uptake.

Parkinson’s disease (PD) is the most common cause of movement disorder characterized by the progressive loss of dopaminergic neurons in the substantia nigra. It is increasingly recognized as a complex group of disorders presenting widely heterogenous symptoms and pathology. Except for the rare monogenic forms, the majority of the PD cases result from an interaction between multiple genetic and environmental risk factors. The search for these risk factors and the development of preclinical animal models are in progress hand in hand, providing mechanistic insights into the pathogenesis of PD. This review summarizes the studies that capitalize on modeling sporadic (i.e. non-familial) PD using Drosophila melanogaster and discuss their methodology, new findings and future perspective.

Environmental assessment is a concept that has been designed to facilitate the present generation to meet their needs without compromising the ability of future generations to meet their own needs as well. Thus, this concept has drawn significant attention from various scholars, researchers and industrial practitioners around the world over the past three decades. Life Cycle Environmental Assessment (LCEA) is a widely metric used to assess the potential ecological impacts, which can be caused by electricity generating supply systems or by other systems than power production plants. However, the current LCEA model is biased and ineffective. Because, its omits factors that are increasingly contributing to the ecological degradation. This study has identified the omitted factors through a critical analysis of a set of previous journal articles conducted in the energy sector. In light of this, this study has developed a novel LCEA framework addressing those blind spots. The framework developed in this study is holistic in nature including all the life cycle stages of a power supply system such as Extraction of the Raw Material (ERM), Transport of Raw Material (TRM), Conversion of Raw into Electricity (CRE), and Transmission and Distribution of Electricity (TDE) to the end users. The novel developed LCEA model has been tested and applied to nine power generation plants such as coal, gas, nuclear, biomass, geothermal, hydro, solar thermal, wind onshore and wind offshore. The results have demonstrated that of conventional technologies including coal, gas, and nuclear, coal energy generating source has got the highest life cycle greenhouse gas Grid Emission Factor (GEF) of 2866 kg CO2e/MWh, followed by gas with 728 kg CO2e/MWh, and nuclear has got the least GEF of 35 kg CO2e/MWh. Whereas of renewable energy sources biomass has got the highest GEF of 1508 kg CO2e/MWh, followed by solar thermal with 46.6 kg CO2e/MWh, hydro 39 kg CO2e/MWh, wind offshore 25.25 kg CO2e/MWh, wind onshore 10.1 kg CO2e/MWh, and geothermal closes the ranking with 6.23 kg CO2e/MWh.

The chemical industry is an integral part of the world economy and a substantial income source for developing countries. However, existing regulations or the enforcement of these regulations, on controlling atmospheric pollutants sometimes may be insufficient, leading to the deterioration of surrounding ecosystems and to a quality decrease of the atmospheric environment. Previous works in this domain fail to generate executable solutions for inspection agencies due to practical challenges. In addressing these challenges, we introduce a so-called Chemical Plant Environment Protection Game (CPEP) to generate reasonable schedules of high-accuracy air quality monitoring stations for inspection agencies. First, Stackelberg Security Games (SSGs) are incorporated together with source estimation methods into this research. Second, high-accuracy air quality monitoring stations as well as gas sensors are modeled into the CPEP. Third, simplified data analysis on the regularly discharging of chemical plants is utilized to construct the CPEP. Finally, an illustrative case study is used to investigate the effectiveness of the CPEP Game, and a realistic case study is conducted to illustrate how the models and algorithms being proposed in this paper, work. Results show that playing a CPEP Game can reduce operational costs of high-accuracy air quality monitoring stations; moreover, playing the game leads to more compliance from the chemical plants towards the inspection agencies.

The construction industry is shifting towards more sustainable practices to address environmental concerns. This review examines the impact of LEED certification on design-build projects, highlighting how the two work together to promote sustainability. By analyzing the article under review, we explore how LEED standards—such as energy efficiency, water conservation, and the use of sustainable materials—are incorporated into design-build projects to create environmentally responsible buildings. The article also discusses the benefits of the design- build approach, which encourages collaboration and early integration of sustainability principles. The review critically assesses the strengths and weaknesses of the article, emphasizing the importance of cost considerations and scalability. Ultimately, it underscores the value of combining LEED certification with design-build to promote green building practices.

The deterioration of living conditions is highlighting the benefits of urban greenery for creating sustainable cities. Using Washington D.C. as a case, we demonstrate the performance of GVI and examine disparities in greening surrounding affordable housing. With the pre-trained segmentation model, we generated GVI based on 54,691 Street View images and applied the Spearman’s correlation analysis to examine LST cooling effect. We found that LST shows significant negative correlations (p<0.001) with GVI and newly developed GVI-3D with coefficients of -0.60 and -0.73. The distribution of GVI in residential zoning was polarised, affordable housing projects have less greenery. In conclusion, we argue that it is of practical significance to monitor GVI instead of large scale NDVI for urban environments due to its controllability and human-centric attributes.

The application of machine learning (ML) and remote sensing (RS) in soil and water conserva-tion has become a powerful tool. As analytical tools continue to advance, the variety of ML al-gorithms and RS sources has expanded, providing opportunities for more sophisticated analyses. At the same time, researchers are required to select appropriate technologies based on research objectives, topic, and scope of the study area. In this paper, we present a comprehensive review on the application of ML algorithms and RS that has been implemented to advance research in soil and water conservation. The key contribution of this review paper is that it provides an overview of current research areas within soil and water conservation and their effectiveness in improving prediction accuracy and resource management in categorized subfields, including biomass-vegetation, soil properties, hydrology and water resources, and wildfire management. We also highlight challenges and future directions based on limitations of ML and RS applica-tions in soil and water conservation. This review aims to serve as a reference for researchers and decision-makers by offering insights into the effectiveness of ML and RS applications in the field of soil and water conservation.

Trichiurus japonicus is the most productive fish caught in our country. In order to understand the seasonal distribution of Trichiurus japonicus in the central and southern parts of the East China Sea and Yellow Sea, three species distribution models were adopted, namely Random Forest Model, K-nearest neighbor algorithm and gradient ascending decision Tree model, based on the data of trawling surveys in the central and southern parts of the East China Sea and Yellow Sea from 2008 to 2009. Combined with variance inflation factor and cross-check, the distribution model of Trichiurus japonicus was screened and constructed to analyze the influence of environmental factors on the distribution of Trichiurus japonicus in the central and southern parts of the East China Sea and the Yellow Sea. The results showed that the random forest model had the advantages of fitting effect and prediction ability among the three models. The analysis of this model showed that the water depth, bottom water temperature and surface salinity had a great influence on the habitat distribution of Trichiurus japonicus. The relative resources of Trichiurus japonicus increased with the increase of bottom water temperature and reached the maximum at 23.8℃, and first increased and then decreased with the increase of water depth and surface salinity, reaching the maximum at 72 m and 31.2‰, respectively. The random forest model was used to predict the spatial distribution of Trichiurus japonicus in the East China Sea and the central and southern Yellow Sea during 2008-2009, and the results showed that the predicted results were close to the actual situation. The research results can provide reference for the exploitation and protection of Trichiurus japonicus resources in the East China Sea and the central and southern Yellow Sea.

The article considers the issues of ensuring operational performance and environmental sustainability of marine diesel engines by using biodiesel fuel. The research was conducted on 5S60ME-C8 MAN-B&W Diesel Group and 6DL-16 Daihatsu Diesel marine diesel engines, which were operated using RMG380 petroleum fuel and B10 and B30 biodiesel fuels. The efficiency of biofuel usage was assessed based on environmental (reduced nitrogen oxide concentration in exhaust gases) and economic (increased specific effective fuel consumption) criteria. It was found out that the use of B10 and B30 biofuels provides reduction of nitrogen oxides concentration in exhaust gases by 14.71–25.13 %, but at the same time increases specific effective fuel consumption by 1.55–6.01 %. Optimum fuel injection advance angles were determined that ensure the best thermal energy, economic and environmental performance of diesel engines. The optimum angle of biofuel supply advance is determined experimentally and should correspond to the limits recommended by the diesel engine operating instructions. It has been proven experimentally that the use of biofuel increases the environmental sustainability of marine diesel engines by 13.75–29.42 %. It increases the diesel engines environmental safety in case of emergency situations, as well as accidental and short-term emissions of exhaust gases with an increased content of nitrogen oxides into the atmosphere - phenomena that are possible in starting modes of diesel engine operation, as well as in modes of sudden load changes. It is the increase in the environmental friendliness of marine diesel engines in the case of using biofuel that is the most positive criterion and contributes to the intensity of biofuel use in power plants of sea vessels.

Hyperspectral imaging data holds great potential for various stages of the mining life cycle in active and abandoned mines. The technology, however, has yet to achieve large-scale industrial implementation and acceptance. While hyperspectral satellite im-agery yields high spectral resolution, high signal-to-noise ratio (SNR), and global availability with breakthrough satellite sys-tems like EnMAP, EMIT, and PRISMA, limited spatial resolution poses challenges for mining sectors, which require decimeter- to centimeter-scale spatial resolution for applications such as reconciliation, ore/waste estimates, geotechnical assessments, and en-vironmental monitoring. Hyperspectral imaging from drones (Uncrewed Aerial Systems; UASs) offers high spatial resolution data relevant to the pit/ mine scale, with the capability for frequent, user-defined re-visit times. Collecting data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions offers to detect different minerals and surface alteration patterns, potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. In this paper, we review of applicable instrumentation, software components, and relevant studies deploying hyperspectral imaging in or appropriate to the mining sector, especially for hyperspectral VNIR-SWIR UASs. If directly applicable, draw on previous insights derived from airborne, satellite, and ground-based imaging systems. We also discuss common practices for UAS survey planning and sampling considerations for interpretation.

This article presents an Internet of Things (IoT)-enabled system meticulously engineered for comprehensive environmental assessment, encompassing air quality, temperature, and humidity. Simultaneously, the devised system integrates cutting-edge MQ6 sensors, adept at detecting ambient gases, with a primary focus on monitoring Liquefied Petroleum Gas (LPG) and Butane gases concentrations in the atmosphere. This distinctive feature not only facilitates the identifi-cation of hazardous gases leakages, particularly common in household LPG usage, but also empowers preemptive measures. The environmental parameters, air quality, temperature, and humidity, are precisely gauged through the utilization of MQ135 and DHT11 sensors. The con-trolling and managing of the hardware component of the system (i.e., device) is assured by an Arduino UNO, that orchestrates the collection of sensor data, transmitting it seamlessly to both the ThingSpeak cloud and a Convolutional Neural Network (CNN) model. By interfacing with ThingSpeak, the device ensures the systematic storage and visualization of environmental data, streamlining monitoring and analysis processes. In the event of perilous gases detection, the system promptly triggers an alarm, concurrently dispatching a real-time notification to the device owner via the integrated If-This-Then-That (IFTTT) application programming interface (API). To further enrich environmental awareness, an embedded microphone captures audio recordings, subsequently processed by a CNN-based deep learning model. This model employs advanced techniques such as spectrogram generation, Convolution2D, and MaxPooling2D within a Se-quential Model architecture, to attain elevated levels of accuracy, furnishing insightful interpre-tations of ongoing activities within the environment.

Cured-in-place pipe (CIPP) lining is a widely adopted method for pipeline renewal, offering advantages such as rapid installation and cost-effectiveness. However, concerns regarding the environmental impacts of volatile organic compound (VOC) emissions during the installation process have raised issues regarding the CIPP method. The literature review conducted in this paper indicated the need for stringent monitoring and management practices to mitigate adverse effects, emphasizing the importance of safe installation protocols. This paper presents the initial results of a case study focusing on VOC emissions, specifically investigating non-styrene polyester resins and water curing. To capture emissions from CIPP activities, the methodology involved air sampling using various equipment, including photoionization detectors (PID), summa canisters, passive worker sampler sorbent tubes, and method 13 cartridges. The preliminary findings indicate that non-styrene polyester resins do not exceed the exposure limits set out by the OSHA and USEPA. The future phases of this project will explore different resins and curing methods.

Globally, habitat fragmentation has increased the proximity between wildlife, humans, and emerging predators such as free-ranging dogs. In these fragmented landscapes, encounters between primates and dogs are escalating, with primates often falling victim to dog attacks while navigating patchy landscapes and fragmented forests. We aim to investigate how these primates deal with the simultaneous threats posed by humans and predators, specifically focusing on the adaptive strategies of Central Himalayan Langur (CHL) in the landscape of fear. To address this, we conducted a behavioral study on the CHL in an agro-forest landscape, studying them for a total of 3912 hours over two consecutive years. Our results indicate that, compared to their most common resting behavior, CHL allocate more time to feeding and locomotion, and less time to socializing in the presence of humans and predatory dogs. Additionally, they exhibit increased feeding and locomotion and reduced social behavior in agro-forest or open habitats. These behavioral patterns reflect adaptive responses to the landscape of fear, where the presence of predators significantly influences their behavior and resource utilization. This study suggests measures to promote coexistence between humans and wildlife through the integration of effective management strategies that incorporate both ecological and social dimensions of human-wildlife interactions.

Digital health has added numerous promising solutions to enhance the health and wellness of people with neurocognitive disorders (NCDs) and their informal caregivers: (1) Background: It is important to get a comprehensive view of currently available technologies, their outcomes, and conditions of success to inform recommendations regarding digital health solutions for people with NCDs and their caregivers. This environmental scan was performed to identify the features of existing digital health solutions relevant to the targeted population. This work reviews currently available digital health solutions and their related characteristics to develop a decision support tool for older adults living with mild or major neurocognitive disorders and their informal caregivers. This knowledge will inform the development of a decision support tool to assist older adults and their informal caregivers in their search for adequate digital health solutions according to their needs and preferences, based on trustable information.; (2) Methods: We conducted an environmental scan to identify digital health solutions from a systematic review and targeted searches in grey literature covering the regions of Canada and Europe. Technological tools were scanned based on a preformatted extraction grid. We assessed their relevance based on selected attributes and summarized findings; (3) Results: We identified 100 available digital health solutions. The majority (56%) were not specific to NCDs. Only 28% provided scientific evidence of their effectiveness. Remote patient care, movement tracking, and cognitive exercises were the most common purposes of digital health solutions. Most solutions were presented as decision aid tools, pill dispensers, apps, web, or a combination of these platforms. (4) Conclusions: This environmental scan allowed the identification of current digital health solutions for older adults with mild or major neurocognitive disorders and their informal caregivers. Findings from the environmental scan highlight the need for additional approaches to strengthen digital health interventions for the well-being of older adults with mild and major NCDs and their informal and formal healthcare providers.

Hyperspectral imaging data holds great potential for the different stages of the mining life cycle in active and post-mining environments. However, the technology has yet to reach the stage of large-scale industrial implementation and acceptance. While hyperspectral satellite imagery can achieve high spectral resolution, signal-to-noise ratio (SNR) and global availability with break-through satellite systems like EnMAP, EMIT and PRISMA, limited spatial resolution poses chal-lenges for sectors like mining, which require decimetre to centimetre scale resolution for applica-tions such as reconciliation, ore/waste estimates, geotechnical assessments and environmental monitoring. Hyperspectral imaging from drones (referred to herein as Uncrewed Aerial Systems; UASs) offers high spatial resolution data relevant to the camp/ mine scale, with the capability for frequent, user-defined re-visit times. This has been made possible by the miniaturization of hy-perspectral imaging systems. Collection of data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions enables the detection of different minerals and surface altera-tion patterns potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. In this paper, we provide a review of relevant studies de-ploying hyperspectral imaging in or applicable to the mining sector, especially for the use of hy-perspectral VNIR-SWIR Uncrewed Aerial Systems. Where required, we draw on previous in-sights derived from satellite or ground-based systems. We also discuss UAS survey planning, and sampling considerations for validation and interpretation.

Abstract: Field studies with large-stemmed plants Artemisia dubia (wormwood) have been carried out at Vėžaičiai Branch LAMMC since 2018. According to three years of experimental results, annual dry matter (DM) yield varied from 7.94 to 10.14 t ha-1. Growing conditions, nitrogen ap-plication level and harvesting time had significant impacts on Artemisia dubia productivity. This article presents the results of research on preparation and use of Artemisia dubia biomass for en-ergy conversion and evaluation of technological-technical and environmental parameters of these plants utilization for solid biofuel. For experiments were used 6 variants of Artemisia dubia samples, which were grown in 2021: plants were cut three times and two fertilization options were used: (1) no fertilization and (2) fertilization with 180 kg ha-1 of nitrogen fertilizer. These harvested plants were chopped, milled and were pressed into the pellets. The physi-cal-mechanical characteristics (mоisture content, density and strength) of Artemisia dubia pellets were investigated. During this study, it was found that the density in dry mass (DM) of pellets ranged from 1119.86 to 1192.44 kg m-3. The pellet moisture content ranged from 8.80 to 10.49%. After testing of pellet strength, it was found that the pellets which were made from plant bio-mass PK-1-1, were the most resistant to compression, they withstood 560.36 N of pressure. Dry fuel lower heating value (LHV) of pellets was sufficiently high and was very close to pine saw-dust pellets, it varied from 17.46±0.25 MJ kg-1 to 18.14±0.28 MJ kg-1. The ash content of burned pellets ranged from 3.62±0.02% to 6.47±0.09%. Emissions of harmful pollutants – CO2, CO, NOx and unburnt hydrocarbons (CxHy) did not exceed the maximum permissible levels. Summariz-ing the results of investigated properties, cоmbustion and emissiоns of Artemisia dubia pellets, it can be concluded that this biofuel can be used for production of pressed biofuel and it is charac-terized by sufficient high quality, efficient combustion and permissible emissions to the envi-ronment.

Qualtra, an innovative 10 MW geothermal power plant proposal, employs a closed-loop design to mitigate emissions, ensuring no direct release into the atmosphere. A thorough assessment utilizing energy and exergy analysis, Life Cycle Assessment (LCA), Exergo-economic and Exergo Environmental Analysis (EevA) was conducted. The LCA results, utilizing the ReCiPe 2016 midpoint methodology, encompass all the spectrum of environmental indicators provided. The technology implemented makes it possible to totally avoid direct atmospheric emissions from the Qualtra plant, so the environmental impact is mainly due to indirect emissions over the life cycle. The results obtained for the Global Warming Potential indicator is about 6.6 g CO2/kWh, notably lower compared to other conventional systems. Contribution analysis reveals that the construction phase dominates, accounting for over 90% of the impact in all LCA MidPoint categories. At the component level, a single score calculation incorporating normalization and weighting was executed. The resulting single score is then used into Exergo-Environmental Analysis (EEvA), highlighting the well system as the most impactful contributor, constituting approximately 45% of the total impact. Other substantial contributions to the environmental impact include the condenser (21%), the turbine (17%), and the HEGeo (14%). The Exergo-Economic analysis assesses cost distribution across major plant components, projecting an electricity cost of about 8.3 c€/kWh.

Precision farming is transforming how antibiotics get used on farms. It fights the overuse that creates superbugs and harms nature. Farmers now have high-tech tools to use antibiotics ultra-precisely. Drones, AI, and advanced watering equipment help them pinpoint only sick plants and animals needing treatment. This shields crops while avoiding environmental damage. More careful antibiotic use makes livestock healthier and boosts harvests too. And it prevents resistant germs, where antibiotics stop working altogether. The approach helps farms in multiple ways, using fewer resources for even better results. There are some growing pains, like high costs for small farms. And questions around data privacy also cause concern. But overcoming these hurdles could help precision farming spread far and wide. This technology promises safer, greener, and more productive agriculture. Targeted use of antibiotics protects both crops and people from drug-proof germs. And nature benefits when less medicine spreads into soil and water. The future looks bright for farming with precision.

Prospecting for a future breeding site is an essential component of informed dispersal. It allows individuals to reduce the uncertainty of their environment by gathering personal and social information about the local quality of alternative breeding areas, and to make informed emigration and settlement decisions. Although this process has been studied in territorial and social animal species for decades, it is still not well-understood and spatial patterns of prospecting movements are hard to generalize over taxa or even species due to substantial intra and inter-specific variability. Using 124 empirical studies which have explicitly described prospecting in a context of breeding habitat selection in birds, mammals, fish and invertebrates, I review why, how, when and which individuals prospect depending on their life history traits and sociality. From this synthesis, I identify persisting knowledge gaps which explain why prospecting is still understudied and sometimes overlooked. I finally propose key objectives and research directions, to shed light on prospecting movements and their consequences on informed dispersal strategies, individual fitness and population dynamics, both empirically and theoretically. A better understanding of the mechanisms underlying prospecting, their causes and their consequences will fully reveal how prospecting could constitute a powerful adaptive response to environmental changes for many social and territorial species which will help them persist on the long-term. It will also significantly enhance our ability to predict species responses to environmental changes and thus, inform more effective management plans for threatened species

In recent years, the Canadian dairy sector has faced escalating challenges due to its significant contribution to greenhouse gas emissions, particularly methane. This paper critically examines a spectrum of innovative techniques aimed at mitigating methane emissions within this sector, scrutinizing their cost-effectiveness, efficiency, compatibility with animal welfare standards, and adherence to both existing and prospective Canadian environmental legislations. The discourse commences with an exhaustive overview of contemporary methane reduction methodologies pertinent to dairy farming, followed by a rigorous analysis of their economic feasibility. This includes a detailed cost-benefit analysis, juxtaposed with the efficiency and technological advancements these techniques embody. A pivotal aspect of this examination is the alignment of animal welfare with emission reduction objectives, ensuring that strategies employed do not compromise the health and well-being of dairy cattle. Furthermore, the paper delves into the legislative landscape of Canada, evaluating the congruence of these techniques with current environmental laws and anticipating future regulatory shifts. Performance indicators for emission reduction are critically assessed, establishing benchmarks tailored to the Canadian context. This is complemented by an exploration of the market potential of these innovations, including factors influencing their adoption and scalability in the market. The analysis culminates with a synthesis of case studies and best practices within Canada, offering insights into successful implementations and drawing lessons for future endeavors. This comprehensive approach serves not only to address the immediate environmental and health impacts associated with dairy farming emissions but also contributes significantly to the overarching goal of sustainable development in the agricultural sector.

A significant number and range of challenges besetting sustainability can be traced to the actions and interactions of multiple autonomous agents (people mostly) and the entities they create (e.g., institutions, policies, social network) in the corresponding social-environmental systems (SES). To address these challenges, we need to understand decisions made and actions taken by agents, the outcomes of their actions, including the feedbacks on the corresponding agents and environment. The science of Agent-based Complex Systems—ACS science—has a significant potential to handle such challenges. The advantages of ACS science for sustainability are addressed by way of identifying the key elements and challenges in sustainability science, the generic features of ACS, and the key advances and challenges in modeling ACS. Artificial intelligence and data science promise to improve understanding of agents’ behaviors, detect SES structures, and formulate SES mechanisms.

The fishmeal production industry is essential for providing protein for animal feed in the aquaculture sector. However, the industry faces challenges related to energy consumption and environmental sustainability. This study evaluates the energy efficiency and environmental benefits of waste heat recovery (WHR) technologies in a fishmeal production plant in Vietnam. Data were collected from the plant between 2016 and 2022, and a specific energy consumption (SEC) indicator and a comprehensive methodology were utilized. Implementing an economizer as a WHR technology resulted in a 55.5% decrease in SEC compared to the state before installation. The enhanced energy efficiency also translated to reduced energy consumption per output unit. Moreover, the economizer contributed to annual energy savings of 4,537.57 GJ/year and cost savings of $26,474.49. Additionally, carbon dioxide (CO2) emissions associated with producing one ton of fishmeal decreased by 58.37%. These findings highlight the potential for WHR technologies to improve energy efficiency and reduce the environmental footprint of fishmeal production. The study's results provide valuable insights for practitioners and policymakers in promoting energy efficiency practices and reducing environmental impact in the industry.

Environmental monitoring systems play a crucial role in assessing environmental quality, detecting limits exceedances, and predicting potential ecological episodes. These systems rely on the measurement of various variables at specific locations and time intervals over an extended period. The concept of environmental monitoring encompasses the assessment of health and safety issues for public and environmental health purposes. Pollution of the atmosphere and water, climate change, and natural disasters are among the consequences of continuous industrial and municipal development and human interference in natural ecosystems. To address these challenges and to protect human lives and the environment, with a special concern on mitigating the ecological effects of industrial development, advanced technical solutions, including the technologies associated with artificial intelligence (artificial neural networks ANNs, machine learning ML) have been developed. These technologies offer powerful tools for analysing the vast amount of data collected by monitoring systems and extracting valuable insights. By applying ANNs and machine learning algorithms, environmental monitoring systems can effectively process and interpret the measured variables to assess environmental quality. Despite challenges and limitations, such as data quality and interpretability of AI models, ongoing research and interdisciplinary collaboration are paving the way for the successful implementation of AI in environmental monitoring, ultimately supporting informed decision-making and sustainable resource management.While several review papers have explored the theory of artificial intelligence (AI), here I aim to review the application of ANNs and ML, in environmental aspects, specifically in automotive and industrial emissions toxicity measurements, as well as atmospheric pollution prevention. By examining the potential of AI in these domains, the paper contributes to understanding the role of advanced technologies in environmental monitoring and protection.

The implementation of grey and green infrastructure is an effective mean to address urban flooding and nonpoint source pollution, but due to the complexity of the process and the diver-sity of benefits, there is a lack of measurement for their comprehensive benefits. Adopting a typ-ical university in Beijing as an example, this paper simulated the multidimensional benefits of the water quantity, water quality, and ecology of grey and green facility renovation by coupling the storm water management model (SWMM) and InfoWorks Integrated Catchment Manage-ment (ICM). Monetization methods and economical means were employed to characterize the comprehensive benefits. The results showed that grey and green infrastructure retrofitting re-duces the number of severe overflow nodes in the study area by 54.35%, the total overflow vol-ume by 22.17%, and the nonpoint source pollution level by approximately 80% under the heavy rain scenario and 60% under the rainstorm scenario. The annual benefits of grey and green infra-structure renovation reached ¥765,600/year, of this amount, ¥83,100/year is from hydrological regulation, ¥454,100/year is from nonpoint source pollution reduction, and ¥228,300/year is from ecological improvement. The benefits of green facilities were higher than those of grey facilities, and the combined benefits were negatively correlated with the rainfall level, with a total bene-fit–cost ratio of 1.19. The results provide methodological and data support for grey and green in-frastructure retrofitting within the context of sponge cities.

The European Green Deal has set a concrete strategic plan to increase farm sustainability. At the same time, the current global challenges, due to climate change and fuels and commodity market crisis, combined with the Covid-19 pandemic and the ongoing war in Ukraine, comprise the need for quality food, but also the reduction of negative external effects of agricultural production, with fair remuneration for the farmers. In response, precision agriculture has great potential to contribute to the sustainable development. Precision agriculture is a farming management that provides a holistic system approach to managing the spatial and temporal crop and soil variability within a field to improve the farm’s performance and sustainability. However, farmers are still hesitant to adopt it. On these premises, the study aims to evaluate the impacts of precision agriculture technologies on farm profitability, agronomic and environmental management by farmers adopting (or not) these technologies, using the case study method. In detail, the work focuses on the period 2014-2022 for two farms that cultivate durum wheat in Central Italy. The results suggest that the implementation of precision technologies can guarantee economic and agri-environmental efficiency. Results could serve as a basis for developing a program to start training in farms as well as suggest policy strategies.

This work is related to the environmental toxicology risk assessment and evaluation of possible transformation of carbon-based nanomaterials (CNMs) after the contact with marine microalgae. The materials used in the study represent common and widely applied multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. Biotransformation of nanomaterials were evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC50 in mg/L, 96 h) of ued CNMs reduced in the following order: CNTs (18.98) &gt; GrO (76.77) &gt; Gr (159.40) &gt; C60 (414.0). Oxidative stress and membrane depolarization was the main toxic action of CNTs and GrO. At the same time, Gr and C60 decreased the toxic action with time and had no negative impact on microalgae even at concentration of 125 mg/L. Moreover, C60 and Gr after seven days of the contact with microalgae cells obtained structural deformations.

According to architectural standards, the common proportion of a rectangular-shaped classroom is the shallow proportion, which has a longer external room facade versus the perpendicular internal sides. Even in the Kingdom of Saudi Arabia (KSA), the same proportion is used in school projects. Environmentally, this proportion is logical when considering the role of adequate natural lighting for classroom visual functions, which could be more easily achieved if its longest side is the external one. But, the environmental efficiency of any architectural space cannot be only judged according to a single human comfort achievement, especially with the diverse environmental characteristics of places around the world. This diversity can show a defect in other human comfort achievements or other environmental issues in different ways when achieving a certain function in a unified way. A holistic study should be done for any common architectural shape or proportion to ensure their priority among other options in achieving maximum green architectural principles for a specific location before confirming and using it. The manuscript compares a rectangular classroom of different external/internal wall proportions to search for their preference to be used in Taif city schools in KSA. The compared case studies have different window variations and similarities to include their effect too. According to the overall green principles assessment, the results showed that the common proportion of classrooms didn’t give the higher green credits, which alerts us that the traditional rectangular classroom proportion is not always optimum for all regions including Taif city in KSA.

Coastal lagoons are dynamic transitional water ecosystems hosting valuable biological communities, including rich and diverse macrophyte assemblages. Aquatic macrophytes must cope with large fluctuations of environmental conditions on a spatial and seasonal scale. Salinity is one of the most variable parameters, changing from nearly freshwater to hypersalinity, and it is known to have a strong influence on the composition and structure of macrophyte assemblages. This study is focused on the effect of salinity on macrophyte communities of the eight most important coastal lagoons of Apulia (south-eastern Mediterranean Sea). A set of eleven transitional water body types (sensu Water Framework Directive) were allocated in a range of meso- to hyperhaline lagoons. Macrophyte sampling was carried out between 2011 and 2019 and a total of 324 samples (18 sampling stations x 2 seasons x 9 years) was analyzed. Then, macrophyte occurrence in each transitional water body (T-WB) was expressed as frequency values (%) and assemblages were compared to assess any similarity in relation to four salinity classes (mesohaline, polyhaline, euhaline, hyperhaline). Species richness varied according to the salinity class, being much higher in polyhaline and euhaline T-WBs and strongly decreasing at the extremes of salinity range (mesohaline and hyperhaline T-WBs). Moreover, statistical analysis showed a high resemblance of macrophyte assemblages of T-WBs within the same salinity class, which shared a great number of species. Four distinct macrophyte communities were distinguished, reflecting the salinity conditions of different T-WB types and confirming the effectiveness of a lagoon typology based on this descriptor.

Environmental monitoring is an important topic and serves a vibrant scientific role by revealing long-term trends that can lead to new knowledge and understanding. Globally, there is active development of photonic sensors incorporating multidisciplinary research. The ultimate objective is to develop small, low-cost, sensitive, selective, quick, durable, remote-controllable sensors that are resistant to electromagnetic interference. Different photonic sensor designs and advances in photonic frameworks have shown the possibility to realize these capabilities. In this review paper, the latest developments in the field of optical waveguide and fiber-based sensors which can serve for environmental monitoring are discussed. Several important topics such as toxic gas, water quality, indoor environment, and natural disaster monitoring are reviewed.

Drinking water quality is a major concern, especially in African countries. This manuscript aims to analyze the chemical composition of Lioua’s groundwater in order to determine the geological processes influencing the chemical elements' composition and origin. Therefore, chemometrics techniques such as multivariate statistical analysis (MSA) and time series methods (TSM) are used. Indeed, MSA includes a component analysis (PCA) and a cluster analysis (CA), while au-tocorrelation analysis (AA) supplemented by simple spectral density analysis (SDA) is used for TMS. PCA displays three main factors explaining a total variance (TV) of 85.01 %. Factors 1, 2, and 3 are 68.72%, 11.96%, and 8.89 % of TV, respectively. In the CA, three groups were controlled by TDS and EC. G1 reveals a close association between SO42−, K+, Ca2+, and TDS; G2 reveals a close association between Na+, Cl−, Mg2+, and EC; G3 shows the dissociation of bicarbonates HCO3− and NO3− from other chemical elements. AA shows a linear interrelationship of EC, Mg2+, Na+, K+, Cl−, and SO42−. However, NO3− and HCO3− indicate uncorrelated characteristics with other parameters. For SDA, the correlograms of Mg2+, Na+, K+, Cl−, and SO42− have a similar trend with EC. None-theless, pH, Ca2+, HCO3− and NO3− exhibit multiple peaks related to the presence of several dis-tinct cyclic mechanisms. The methods enabled the authors to conclude that the geochemical processes influencing the chemical composition are: (i) dissolution of evaporated mineral depos-its, (ii) water-rock interaction, and (iii) evaporation process. In addition, Groundwater exhibits two bipolar characteristics, one recorded with negative and positive charges on pH and Ca+ and another recorded only with negative charges on HCO3− and NO3−. On the other hand, SO42-, K+, Ca2+, and TDS are the major predominant elements in the groundwater’s chemical composition. The major participation of salts and chlorides is in the electrical conductivity of water. The dominance of the lithological factor in the overall mineralization of the Plio-Quaternary surface aquifer waters. The origins of HCO3− and NO3− are different. Indeed, carbonated for HCO3- has a carbonate origin, whereas NO3– has an anthropogenic origin. The salinity was affected by Mg2+, SO42-, Cl-, Na+, K+, and EC. Ca2+, HCO3− and NO3− are resulted from human activity fertilizers, the carbonate facies outcrops, and domestic sewage.

The pressure on freshwater resources is leading to diminishing flows in some of the critical river systems across the globe and India is no exception and this is mainly because of water withdrawal for irrigation, which is often to the tune of 70% to 80% with some proportion for domestic and industrial use. While graduating from the concept of environmental flows and its assessment methodologies in India, the water-managers, the researchers and the conservationists are now moving towards answering the next question if the rivers are to be revived, then where will the water come from, especially in the case of over-allocated rivers, including the river Ganga. While the logical way is to look at the biggest user of water, i.e. irrigation, it remains to be seen whether the irrigation water savings will actually lead to enhancing flows in a river, complementing the efforts towards maintaining e-flows in rivers, or whether it will lead to more area under agriculture, bring changes in cropping patterns towards more water-intensive crops or result in something else. This is a growing debate across the globe, where India is no exception, and there has been a wide range of opinions in this regard. This paper discusses the process, findings and lessons from a joint initiative involving farmers, the Uttar Pradesh state Irrigation and Water Resources Department, Bijnor District Administration and a conservation organisation to enhance flows in a rivulet, called karula River, which is part of the Ganga river system.

We develop the process of discounting when underlying rates follow a jump-diffusion process, that is, when, in addition of diffusive behavior, rates suffer a series of finite discontinuities located at random Poissonian times. Jump amplitudes are also random and governed by an arbitrary density. Such a model may describe the economic evolution specially when extreme situations occur (pandemics, global wars, etc.). When between jumps the dynamical evolution is governed by an Ornstein-Uhlenbeck diffusion process, we obtain exact and explicit expressions for the discount function and the long-run discount rate and show that the presence of discontinuities may drastically reduce the discount rate, a fact that has significant consequences for environmental planning. We also discuss as a specific example the case when rates are described by the continous time random walk.

When it comes to air pollution complaints, odours are often the most significant contributor. Sources of odour emissions range from natural to anthropogenic. Mitigation of odour can be challenging, multifaceted, site-specific, and is often confounded by its complexity—defined by existing (or non-existing) environmental laws, public ordinances, and socio-economic considerations. The objective of this paper is to review and summarize odour legislation in selected European countries (France, Germany, Austria, Hungary, United Kingdom, Spain, The Netherlands, Italy, Belgium), North America (USA and Canada), South America (Chile and Colombia), as well as Oceania (Australia and New Zealand) and Asia (Japan, China). Many countries have incorporated odour controls into their legislation. However, odour-related assessment criteria tend to be highly variable between countries, individual states, provinces and even counties and towns. Legislation ranges from (1) no specific mention in environmental legislation that regulates pollutants which are known to have an odour impact to (2) extensive details about odour source testing, odour dispersion modeling, ambient odour monitoring, (3) setback distances, (4) process operations, and (5) odour control technologies and procedures. Agricultural operations are one specific source of odour emissions in rural and suburban areas and a model example of such complexities. Management of agricultural odour emissions is important because of the dense consolidation of animal feeding operations and the advance of housing development into rural areas. Overall, there is a need for continued survey, review, development, and adjustment of odour legislation that considers sustainable development, environmental stewardship, and socio-economic realities, all of which are amenable to a just, site-specific, and sector-specific application.

The sustainable use of precious water resources requires effective water management. In the European Union, water management is mainly regulated by the Water Framework Directive (2000/60/EC), introducing an integrated river basin management approach. As EU directive, the legislation needs to be implemented in the Member States, entailing not only legal transposition, but also application and enforcement in Member States. One major instrument introduced by the Water Framework Directive is the environmental goal achievement obligation of art. 4 WFD, containing also a deterioration ban with several exemptions. This study compares transposition, application and enforcement of the exemption of permanent deterioration (art. 4 (7) WFD) in the context of the environmental goal achievement obligation regime in Lower Saxony (Germany) and the Netherlands. The study rests on a legal analysis of literature, policy documents and jurisprudence. Although based on the same EU directive wording and case law of the European Court of Justice, the deterioration ban and the exemption of permanent deterioration are implemented rather differently: While the deterioration ban is predominantly understood as planning obligation in the Netherlands, it became an important permit requirement in Lower Saxony since the Weser-ruling of the European Court of Justice.

Consumer, as one of the vital stakeholders of fashion supply chain, has a significant role to play to transition fashion industry into sustainable direction. From purchasing and care practice to donation and disposal, every step of their decision has impact on the environment. Various internal and external variables, including culture, custom, value, belief, norm and assumption, economy, gender, and education etc. influence forming that decision. The result of the decision not only directly impacts he environment and society, but also consumer culture and future business opportunity. This study synthesizes a wide spectrum of consumer behavior related to clothing consumption and associated environmental impact. Building on the synthesis, a holistic discussion is offered which can provide relevant behavioral guideline to consumers as well as other stakeholders.

Currently the majority of studies on vision-based measurement has been conducted under ideal environments so that an adequate measurement performance and accuracy is ensured. However, vision-based systems may face some adverse influencing factors such as illumination change and fog interference, which can affect the measurement accuracy. This paper develops a robust vision-based displacement measurement method which can handle the two common and important adverse factors given above and achieve sensitivity at the subpixel level. The proposed method leverages the advantage of high-resolution imaging incorporating spatial and temporal context aspects. To validate the feasibility, stability and robustness of the proposed method, a series of experiments was conducted on a two-span three-lane bridge in the laboratory. The illumination change and fog interference are simulated experimentally in the laboratory. The results of the proposed method are compared to conventional displacement sensor data and current vision-based method results. It is demonstrated that the proposed method gives better measurement results than the current ones under illumination change and fog interference.

Environmental DNA (eDNA) is an increasingly used non-invasive molecular tool for detecting species presence and monitoring populations. In this article, we review the current state of non-avian reptile eDNA work in aquatic systems, as well as present a field experiment on detecting the presence of painted turtle (Chrysemys picta) eDNA. Thus far, turtle and snake eDNA studies have been successful mostly in detecting the presence of these animals in field conditions. However, some instances of low detection rates and non-detection occur for these non-avian reptiles, especially for squamates. We explored this matter by sampling lentic ponds with different densities (0 kg/ha, 6 kg/ha, 9 kg/ha, and 13 kg/ha) of painted turtles over three months, attempting to detect differences in eDNA accumulation using a qPCR assay. Only one sample of the highest density pond readily amplified eDNA. Yet, estimates of eDNA concentration from pond eDNA were rank-order correlated with turtle density. We present a “shedding hypothesis”–the possibility that animals with hard, keratinized integument do not shed as much DNA as mucus-covered organisms–as a potential challenge for turtle eDNA studies. Despite challenges with eDNA inhibition and availability in water samples, we remain hopeful that eDNA can be used to detect freshwater turtles in the field. We provide key recommendations for biologists wishing to use eDNA methods for detecting non-avian reptiles.

The hybrid personal cooling system (HPCS) consisted of ventilation fans and phase change materials (PCMs) covered with insulation pads is a promising wearable cooling system to mitigate heat strain and heat-related illnesses of occupational workers with heavy labor in hot environments. Effects of clothing characteristics (e.g., thermal resistance of insulation pads, latent heat and melting temperature of PCMs) on the thermal performance of the HPCS have been investigated in detail in our previous study. Apart from the aforementioned factors, environmental conditions, i.e., environmental temperature and relative humidity, also significantly affect the thermal performance of the HPCS. In this paper, a numerical parametric study was performed to investigate the effects of the environmental temperature and relative humidity (RH) on the thermal management of the HPCS. Five levels of air temperature under environmental RH=50% were chosen (i.e., 32, 34, 36, 38 and 40 ºC) to study the impact of environmental temperature on the HPCS’s cooling performance. In addition, four levels of environmental RH at ambient temperatures of 36 and 40 ºC were selected (i.e., 30, 50, 70 and 90%) to examine the effect of RH on cooling performance of the HPCS. Results show that high environmental temperatures could accelerate the PCM melting process and thereby weaken the cooling performance of HPCS. In the moderately hot environment (36 °C), the HPCS presented good cooling performance with the maximum core temperature at around 37.5 °C during excise when the ambient RH≤70%, whereas good cooling performance could be only seen under RH≤50% in the extremely hot environment (40 °C). Thus, it may be concluded that the maximum environmental RH for the HPCS exhibiting good cooling performance decreases with the increase in the environmental temperature.

The importance of predicting the exposure to environmental hazards is highlighted by issues like global climate change, public health problems caused by environment stresses, and property damages and depreciations. Several approaches have been used to assess potential exposure and achieve optimal results under various conditions, for example, for different scales, groups of people, or certain points in time. Micro-simulation tools are becoming increasingly important in human exposure assessment, where each person is simulated individually and continuously. This paper describes an agent-based model (ABM) framework that can dynamically simulate human exposure levels, along with their daily activities, in urban areas that are characterized by environmental stresses such as air pollution and heat stress. Within the framework, decision making processes can be included for each individual based on rule-based behavior to achieve goals under changing environmental conditions. The ideas described in this paper are implemented in a free and open source NetLogo platform. A simplified modeling scenario of the ABM framework in Hamburg, Germany, further demonstrates its utility in various urban environments and individual activity patterns, and portability to other models, programs and frameworks. The prototype model can potentially be extended to support environmental incidence management by exploring the daily routines of different groups of citizens and compare the effectiveness of different strategies. Further research is needed to fully develop an operational version of the model.

The development of small scale hydroelectric power plants in Norway is determined by natural conditions, policies, attitudes and property rights. The owner of the river is the central decision maker. It is he who decides whether he will develop the power plant himself, Whether he wants to enter into a contract with an external investor and let him develop the power plant, whether he will sell his property rights or postpone the decisions. All available choices will involve risk. In order for him to make the best choice he must find the certainty equivalent to each of the choices and choose the one with the highest certainty equivalent. This is the first time the utility theory of John von Neumann and Oskar Morgenstern has been applied to decision makers in the hydro power industry in Norway.

Our work is regarding the analysis of land use changes, in the light of “saving soil” against the expansion due to unearned plus value of land: The loss of natural and agricultural surface in front of the expanding urban environment is a critical aspect of unsustainability of urban development, especially in the way it was carried out in the past decades. The measure of the physical transition of land use and characters from a more natural condition of land surface to a new artificial one, joint with a parallel analysis of the increase of land value due to such change is nowadays a major land-policy tool. The interplay of urban economics regulation with planning, reveals new key issues in urban governance and environmental preservation. In this paper it will be shown some experiment about the impact assessment of soil take, related with the seek of valorization of property inside the planning process. Our paper reports as well about the experimental activity carried out inside the MITO Lab of the Polytechnic of Bari, where reports about property values and environmental values have been produced, specially looking at the reality of the Apulia, a southern Italian Region, that is rich of farmlands and coastlines, often invaded by constructions with a severe loss of nature, landscape and ecosystems services.

Introduction: Situated within the broad spectrum of lymphoproliferative diseases, Hodgkin (HL) and non-Hodgkin lymphomas (NHL) are neoplasms renowned for their complexity and heterogeneity, insidious onset, and frequent detectability at advanced, even terminal, stages worldwide.Objectives: The study aimed to compile conclusive statistics, identify genetic factors, and establish correlations with environmental carcinogens, while simultaneously highlighting the importance of developing preventive informational programs for the population.Materials and Methods: The retrospective study encompassed individuals admitted to the Hematology Clinic of "Sfântul Spiridon" Hospital in Iași between January 1, 2010 and December 31, 2019. Out of 1916 patients hospitalized with hematologic neoplasms, 392 were diagnosed with lymphoma. Eighty-four cases exhibiting genetic predisposition (21.42%) were selected, among which 20 displayed a heightened genetic burden (5.1%). These cases were thoroughly analyzed based on medical records.Results and discussion: The study underscores/highlights/emphasizes the significant position of malignant lymphomas among hematologic neoplasms (20.45%). Although the majority do not present malignant heredocolateral antecedents(78.58%), with an estimated empirical recurrence risk(2-4%), predisposing diseases, along with exposure to environmental carcinogens, as well as the region of residence, play fundamental roles in the determinism. It is observed that older individuals from urban agglomerations, especially males (54-70%), have a higher probability of developing these conditions and are therefore recommended to undergo regular check-ups.Conclusion: Unequivocally characterized by a vast etiology, multifactorial diseases result from the bilateral interaction between environmental and hereditary factors.

Metabolomics studies require a deep understanding of enzyme dynamics and their responses to environmental disturbances within a complex metabolic network. This paper presents a novel approach to modeling enzyme activity as a dynamic topological manifold, where each enzyme is represented as a node, and their interactions are described by differential equations. These equations account for both compensatory interactions and external perturbations, simulating how enzymes dynamically stabilize their activities in response to varying conditions. We explore the application of this model to visualize enzyme interactions, using graph theory to represent the network structure and color gradients to illustrate interaction intensities. Multiple disturbances are introduced to analyze the network's resilience and adaptability over time. The results provide insights into the compensatory mechanisms within enzymatic networks, offering a comprehensive visualization through both static and dynamic representations. Our approach allows for a better understanding of how enzymatic systems buffer against mutations and environmental stressors, contributing to the broader field of systems biology and metabolomics.

This research investigates the transformative role of digital health solutions in tackling climate-related health challenges. The study underscores the potential of digital health innovations to empower individuals and communities, fostering resilience and collective action in addressing the health impacts of climate change. By enhancing the accessibility of critical health information and enabling real-time responses, these digital tools not only mitigate immediate risks but also contribute to long-term public health strategies. The findings highlight the importance of integrating digital health solutions into broader climate health initiatives, demonstrating their capacity to bridge gaps in public health infrastructure, especially in vulnerable populations. This research calls for continued investment and innovation in digital health technologies as a vital component of global efforts to combat the growing challenges posed by climate change

Sour waters are one of the main aqueous byproducts generated during petroleum refining and require processing in Sour Water Treatment Units (SWTUs) to remove contaminants such as H₂S and NH₃ in compliance with environmental legislations. Therefore, monitoring the composition of SWTU effluents, including acid gas, ammoniacal gas, and treated water, is essential. This study aims to present an AI (artificial intelligence) hybrid-based methodology to develop soft sensors capable of real-time prediction of H₂S and NH₃ mass fractions in the effluents of SWTUs and validate them using real data from industrial units. Initially, a new database based on the dynamic simulation of a two stripping columns SWTU phenomenological model, developed in Aspen Plus Dynamics® V10, was generated, aiming at non-faulty runs, unlike our previous work [1]. Ensemble methods (Decision Trees), such as Gradient Boosting and Random Forest, and Support Vector Machines were compared for soft sensor creation using these simulated data. The best outcome was the development of six soft sensors based on Random Forest with R² greater than 0.87, MAE less than 0.12, MSE less than 0.17, and RMSE less than 0.41. Variable importance analysis revealed that the temperature of the second stage of Column 1 significantly influences the thermodynamic equilibrium of H₂S and NH₃ separation from sour waters, being critical for five of the six soft sensors. After this initial stage using data from the phenomenological model, data from an industrial-scale SWTU were used to develop real soft sensors. The results proved the effectiveness of the conjugated use of physical model and industrial data approach in the development of soft sensor for two-column SWTUs.

This study examines the balancing between urban transportation security and supply chain efficiency amid global disruptions like the COVID-19 pandemic, attacks on maritime lanes, and geopolitical conflicts. The authors combine bibliometric network analysis and natural language processing (NLP) to review scholarly literature from 2017 to 2023. This approach identifies and visualizes evolving thematic trends. Findings reveal a shift towards integrating advanced technologies such as blockchain, AI, and IoT to enhance security without compromising efficiency. This study highlights the significance of integrating urban planning principles and sustainable practices to enhance transportation security and supply chain efficiency within urban environments. Actionable insights for policymakers and supply chain managers emphasize the adoption of integrated, technology-driven security solutions to foster resilient and sustainable supply chains. This research contributes to academic discourse by refining the understanding of evolving priorities in transportation security and supply chain management, offering both theoretical and practical implications for secure and efficient global supply chains.

The present qualitative study delves into the sustainability practices within supply chain management, emphasizing insights garnered from leading global firms. With sustainability becoming an imperative across industries, understanding how top firms integrate sustainable practices within their supply chains offers valuable lessons for broader implementation. The investigation draws on interviews, case studies, and existing literature to identify key strategies, challenges, and outcomes associated with sustainable supply chain management. Findings reveal a comprehensive approach involving the adoption of green technologies, ethical sourcing, and stakeholder engagement, all of which contribute to enhanced environmental and social performance. The discussion highlights the critical role of leadership, innovation, and collaboration in driving sustainability, underscoring the need for continuous improvement and adaptation. Ultimately, the study concludes that while significant progress has been made, ongoing efforts and commitment are essential for achieving long-term sustainability goals in supply chain management.

The global energy crisis is a significant issue, particularly in developing countries like Ethiopia, where traditional fuels such as wood and charcoal are predominantly used to meet energy demands in urban and rural areas. Despite Ethiopia's substantial charcoal production, the use of inefficient charcoal cookstoves exacerbates fuel consumption, forest degradation, and environmental damage. To address this, various improved charcoal cookstoves (ICS) have been introduced in urban and semi-urban communities in Wereta Town, located in the Amhara Regional State of Ethiopia. This study aims to evaluate household perceptions and identify barriers to the adoption of ICS in the Wereta district. The assessment involved a survey of 308 households using a structured cross-sectional method and analyzed five types of improved cookstoves: clay stoves, insulated clay cylinder stoves, non-insulated rocket stoves, insulated rocket stoves, and non-insulated cylindrical stoves. The study employed various socio-economic variables and utilized both cross-tabulation frequency factors and linear regression statistical analysis through SPSS 20 to identify factors influencing the adoption of ICS. The linear regression results indicated that marital status, income level, family size, and age significantly impact ICS adoption (p-value < 0.05), while the place of cooking, educational level, household decision-making, and the role of societal stakeholders showed no significant impact. This suggests that ICS adoption is primarily influenced by household income levels and family size.

The study is dedicated to analyzing the complex interaction between Artificial Intelligence (AI) and the Internet of Things (IoT) with institutional structures in the context of sustainable development. This work examines the impact of these technologies on economic and social development, identifying their potential advantages and risks. Methodologically, the research relies on information gathering and case study analysis, assessing the impact of technology in various domains, from smart cities to the manufacturing sector. The findings emphasize the necessity of integrating technological innovations into broader social and environmental initiatives, highlighting the importance of institutional transformations for achieving environmental sustainability.

Dealing with and maintaining high-quality standards in the design and construction phases is challenging, especially for on-site construction. Issues like improper implementation of building components and poor communication can widen the gap between design specifications and actual conditions. To prevent this, particularly for energy-efficient buildings, it's vital to develop resilient, sustainable strategies. These should optimize resource use, minimize environmental impact, and enhance livability, contributing to carbon neutrality by 2050 and climate change mitigation. Traditional post-occupancy evaluations, which identify defects after construction, are impractical for addressing energy performance gaps. A new, real-time inspection approach is necessary throughout the construction process. This paper suggests an innovative guideline for prefabricated buildings, emphasizing digital 'self-instruction' and 'self-inspection'. These procedures ensure activities impacting quality adhere to specific instructions, drawings, and 3D models, incorporating relevant acceptance criteria to verify completion. This methodology, promoting alignment with planned energy-efficient features, is supported by BIM-based software and Augmented Reality (AR) tools, embodying Industry 4.0 principles. BIM and AR bridge the gap between virtual design and actual construction, improving stakeholder communication and enabling real-time monitoring and adjustments. This integration fosters accuracy and efficiency, key for energy-efficient and Nearly Zero-Energy Buildings, marking a shift towards a more precise, collaborative, and environmentally sensible construction industry.

Surface–subsurface soil-rock modeling is crucial for infrastructure design and groundwater yield optimization, especially in the complex crystalline basement terrains of Penang Island, Malaysia. This study conducted large-scale characterization of soil-rock profiles using ERT, SRT, rock quality designation, and soil penetration test (SPT N-values) data, optimized through regression modeling. The approach effectively identified soil-rock structures and their suitability to prevent structural failures and enhance groundwater productivity. Correlations between borehole lithologic logs and velocity–resistivity models revealed distinct soil compositions across the study area. The results highlighted thick, saturated, and loose silty to sandy bodies in the eastern to northern sections, contrasting with sandy compositions and penetrative fractures in the southern part. The study also found good correlations between rock mass quality and N-values for different soil types. Depths of intra-bedrock weathered/fractured units varied between 12 and >35 m. This has significant implications for determining optimal foundation depths in the study area. Groundwater productivity was associated with intra-bedrock planes of weakness at depths exceeding 40 m. Overall, this study developed empirical relations between geophysical and geotechnical parameters for wet tropical granitic terrains, filling critical gaps in understanding subsurface characteristics.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

This study reports the synthesis and characterization of novel per-fluorinated organic polymers with azo- and azomethine-based linkers using nucleophilic aromatic substitution. The polymers reveal variations in the fluorine content via the incorporation of decafluorobiphenyl and hexafluorobenzene linkers, which enhanced their hydrophobic nature. The rich fluorine polymers were slightly soluble in THF and have shown molecular weights between 4886 to 11948 g/mol. All polymers exhibit thermal stability in the range of 350-500°C, with varying thermal stability depending on the fluorine and nitrogen content. Conjugation of the polymers was confirmed through changes in the UV-Vis spectra, with a hypsochromic shift observed in all cases, more pronounced in azo-based fluorinated chains due to H-bonding on the nitrogen sites, chain conformations, and planarity. The optical band gap (Eg) of the polymers was determined from the UV-Vis data, with the Eg values of the azo-based fluorinated polymers being 1 eV higher than those of their corresponding linkers. The cross-linking formation was characterized by porosity measurements, with the azo-based polymer exhibiting the highest surface area of 770 m²/g with a pore volume of 0.35 cm³/g, while the open-chain azomethine-based polymer exhibited the lowest surface area of 285 m²/g with a pore volume of 0.0872 cm³/g. Porous structures with varied hydrophobicities were investigated as adsorbents for separating water-benzene and water-phenol mixtures and selectively binding methane/carbon dioxide gases from the air. The most hydrophobic polymers containing the decafluorbiphenyl linker were suitable for benzene separation, while the best methane uptake values were 6.14 and 3.46 mg/g for DAB-Z-1O and DAB-A-1O, respectively. DAB-Z-1h, with the highest surface area and rich in nitrogen sites, exhibited the highest CO₂ uptake at 298 K (17.25).

Providing safely-managed sanitation/hygiene requires key competencies for education, training, service delivery, enterprise development and management, product and infrastructure design and development, construction and installation, governance, financing, research, etc. These strategic sanitation capacities will have to be built from higher education’s academic and professional programmes structured and designed to produce skilled and knowledgeable professionals and practitioners. This study aims to investigate the quality of the sanitation/hygiene management content of Environmental Health programmes; the adequacy of the existing central curricula; and the perception of environmental health sanitation/hygiene-trained professionals to determine the next phase for building knowledge and capacity of sanitation professionals in Nigeria through higher education institutions. A multilevel mixed method concurrent study was used for sampling and data collection with a multilevel perception analysis to examine the perceptions of students, lecturers and graduate alumni as well as employers/supervisors and clients/service-users of sanitation/hygiene related graduates. The main findings of this paper show limited understanding of the concepts of contemporary issues of sanitation/hygiene management; the central/national teaching and curricula were found to be seriously out of date; and clients/service-users were dissatisfied with the skills and knowledge levels of the graduates. The study concludes by recommending a national sanitation management higher education pathway to guide the provision of integrated sanitation/hygiene management education at higher education institutions (HEIs), to build effective, efficient, competent, and sufficient workforce for the country.

A small but growing body of literature suggests that outdoor experiences during childhood affect environment-related behaviors in adulthood. However, research on the magnitude of the effect (effect size) of outdoor experience on learners’ behaviors remains scarce. In this study, we explore the extent to which outdoor experiences associate with environmentally responsible behaviors. Our sample consisted of 143 ninth- and tenth-grade students living on a Greek island. The data were collected using a properly adjusted environmental literacy instrument. Two different methodological pathways, i.e., a quasi-experimental approach and correlation analysis, were used to analyse the data. A tentative variable representing the frequency and intensity of students’ experiential contact with nature was found to be the strongest available predictor of their self-reported pro-environmental behaviors. The findings of this study support the significance of outdoor, experiential learning during childhood in shaping individuals’ environmental behaviors.

: This study aims at examining how B Corporations advance Sustainable Development Goals (SDGs) in their practices by analyzing the socioenvironmental problems they address and the solutions they provide to those problems. All Argentinian B corporations, certified by early 2023 (135 companies), were investigated using a mixed approach, combining social network analysis with textual data analysis. The results showed that the environmental practices are primarily linked to waste, water, energy and chemical management, as well as product innovation. In turn, the social practices address the training, education, and well-being of employees and other stakeholders, diversity, equity and inclusion management, and the creation of an inclusive and fair environment, integrating local communities. Thus, in the flow of their sustainability practices, Argentinian B Corporations contribute to SDGs 8, 12, 13, 9, 6, 7, 5, 10, 11, 4, and 17, in line with the SDGs declared by these companies. Our findings contribute to the theoretical knowledge of the B Corp movement and have practical implications by providing inputs to improve the management of B Corporations and to guide public policies encouraging these companies to advance sustainable development dimensions lacking attention.

Mental health issues can have significant impacts on individuals and communities and hence on social sustainability. There are several challenges facing mental health treatment, however, more important is to remove the root causes of mental illnesses because doing so can help prevent mental health problems from occurring or recurring. This requires a holistic approach to understanding mental health issues that are missing from the existing research. Mental health should be understood in the context of social and environmental factors. More research and awareness are needed, as well as interventions to address root causes. The effectiveness and risks of medications should also be studied. This paper proposes a big data and machine learning-based approach for the automatic discovery of parameters related to mental health from Twitter data. The parameters are discovered from three different perspectives, Drugs & Treatments, Causes & Effects, and Drug Abuse. We used Twitter to gather 1,048,575 tweets in Arabic about psychological health in Saudi Arabia. We built a big data machine learning software tool for this work. A total of 52 parameters were discovered for all three perspectives. We defined 6 macro-parameters (Diseases & Disorders, Individual Factors, Social & Economic Factors, Treatment Options, Treatment Limitations, and Drug Abuse) to aggregate related parameters. We provide a comprehensive account of mental health, causes, medicines and treatments, mental health and drug effects, and drug abuse, as seen on Twitter, discussed by the public and health professionals. Moreover, we identify their associations with different drugs. The work will open new directions for social media-based identification of drug use and abuse for mental health, as well as other micro and macro factors related to mental health. The methodology can be extended to other diseases and provides a potential for discovering evidence for forensics toxicology from social and digital media.

Every day around 93% of children under the age of 15 (1.8 billion children) breathe outdoor air that is so polluted it puts their health and development at serious risk. Due to the pandemic, however, ventilation of buildings using outdoor air has become an important safety technique to prevent the spread of COVID-19. With the mounting ev-idence suggesting that air pollution is impactful to human health and educational out-comes, this contradictory guidance may be problematic in schools with higher air pol-lution levels, but keeping kids COVID-19 free and in school to receive their education is now more pressing than ever. To understand if all schools in an urban area are ex-posed to similar outdoor air quality and if school infrastructure protects children equally indoors, we installed research grade sensors to observe PM2.5 concentrations in indoor and outdoor settings to understand how unequal exposure to indoor and out-door air pollution impacts indoor air quality among high- and low-income schools in Salt Lake City, Utah. Based on this approach, we found that during atmospheric inver-sions and dust events, there was a lag ranging between 35 to 73 minutes for the out-door PM2.5 concentrations to follow a similar temporal pattern as the indoor PM2.5. This lag has policy and health implications and may help to explain the rising concerns re-garding reduced educational outcomes related to air pollution in urban areas. These data and resulting analysis show that poor air quality may impact school settings, and the potential implications with respect to environmental inequality.

A total of 281 guano samples were collected from caves (N = 181) in 8 European countries (Bulgaria, Czech Republic, France, Hungary, Italy, Romania, Slovakia and Slovenia) and attics in the Czech R. (N = 100). The correlation of detection of mycobacteria between Ziehl-Neelsen (ZN) microscopy and culture examination and qPCR was strong. ZN microscopy was positive in guano from caves (58.6%) more than double than positivity in guano from attics (21.0%; P &lt;0.01). From 89 mycobacterial isolates (73 isolates from cave guano and 16 isolates from attics’ guano) 68 (76.4%) isolates of 19 sp., ssp. and complex were identified as members of 3 Groups (M. fortuitum, M. chelonae, and M. mucogenicum), and 4 Complexes (M. avium, M. terrae, M. vaccae, and M. smegmatis). A total of 20 isolates (22,5%) belonged to risk group 1 (environmental saprophytes), 48 isolates (53.9%) belonged to risk group 2 (potential pathogens), and none of isolates belonged to risk group 3 (obligatory pathogens). When comparing bat guano collected from caves and attics, differences (P&lt;0.01; Mann-Whitney test) were observed for the electrical conductivity, total carbon, total organic and total inorganic carbon. None difference (P&gt; 0.05; Mann-Whitney test) was found for pH and oxidation-reduction potential parameters.

In contemporary design practices, there is a disconnect between the design techniques used for early-stage design experimentation and performance analysis, and those used for the manufacture and construction. This study addresses the problems in developing an integrated digital design workflow and provides a research framework for integrating environmental performance requirements with robotic manufacturing processes on a construction site. The proposed method enables the user to import a design surface, identify design parameters, set several environmental performance goals, and thereafter simulate and select a robotic building strategy. Based on these inputs, design alternatives are developed and evaluated, considering their robotically simulated constructibility, in terms of their performance criteria. To validate the proposed method, the design is evaluated in an experiment wherein a double-skin facade perforation is generated using the proposed methodology. The results suggest a heuristic feature to improve the simulated robotic constructibility. Moreover, the functionality of the prototype is demonstrated.

In Nitrate Vulnerable Zones (NVZ) site-specific techniques are needed to match N availability with durum wheat (Triticum turgidum subsp. durum Desf.) requirements. Enhanced-efficiency fertilizers (EEF) can improve efficient N supply and reduce leaching, thus contributing to sustainable agriculture. To study the effects of rates, sources and timings of nitrogen application, two-year field experiments were carried out at two Mediterranean NVZs of Central Italy (Pisa and Arezzo). The trial compared: i) two N rates: one based on the crop N requirements (NO), the other on the Action Programmes’ prescriptions of the two NVZ (NAP); ii) three N sources (urea, methylene urea (MU), and nitrification inhibitor (NI) 3,4-Dimethylpyrazole phosphate (DMPP); and two top-dressing timings (1st tiller visible and 1st node detectable). Grain yield and yield components were determined, together with N uptake. Results showed that: i) grain and biomass production were reduced with NAP at both locations; ii) urea performed better than slow-release fertilizers; iii) the best application time varied depending on N source and location: at Pisa enhanced-efficiency fertilizers achieved higher yields when applied earliest, while for urea the contrary was true; at Arezzo different N fertilizers showed similar performances between the two application timings. Different behaviors of top-dressing fertilizers at the two localities could be related to the diverse patterns of temperatures and rainfall. Therefore, optimal fertilization strategies vary according to environmental conditions.

This study presents a methodology to reveal traces of viral particles, as aerosol with known chemical and molecular structure, in a sample by means of photon and electron interactions. The method is based on Monte Carlo simulations and on the analysis of photon-electron fluxes-spectra through energy channels counts as a function of different aerosol viral concentrations in the air sample and looking at the peculiar photon/electron interactions with the potential abnormal atomic hydrogen (H), oxygen (O), carbon (C), and phosphorus (P) compositions present in the air sample as a function of living and nonliving matter with PO4 group RNA/DNA strands in a cluster configuration.

In contemporary design practices, there is a disconnect between the design techniques used for early-stage design experimentation and performance analysis, and those used for the manufacture and construction. This study addresses the problems in developing an integrated digital design workflow and provides a research framework for integrating environmental performance requirements with robotic manufacturing processes on a construction site. The proposed method enables the user to import a design surface, identify design parameters, set several environmental performance goals, and thereafter simulate and select a robotic building strategy. Based on these inputs, design alternatives are developed and evaluated, considering their robotically simulated constructibility, in terms of their performance criteria. To validate the proposed method, the design is evaluated in an experiment wherein a double-skin facade perforation is generated using the proposed methodology. Initial results suggest a heuristic feature to improve the simulated robotic constructibility. Moreover, the functionality of the prototype is demonstrated.

Multiple social and environmental justice concerns are linked to urban form such as the distribution of socioeconomic class populations, healthcare spending, air pollution exposure, and human mobility. This study used 1m resolved LIDAR data to characterize land use in Salt Lake County, Utah and associate it with sociodemographic and air quality data at the census block group and zip code levels. We found that increasing tree cover was associated with higher per capita income and lower minority populations while increasing built cover was linked to lower per capita income and higher minority populations. Air quality showed less strong correlations, however, decreased non irrigated cover, increased built cover, and higher amounts of households living under poverty was related to higher long-term PM2.5 exposure. Several policy efforts have been undertaken to improve air quality and reduce negative health outcomes in Utah which are being informed by regulatory and research grade air quality sensors.

The prolonged lockdown imposed to contain the COVID-19 pandemic prevented many people from direct contact with nature and greenspaces, raising alarms for a possible worsening of mental health. This study investigates the effectiveness of a simple and affordable remedy for improving psychological well-being, based on audio-visual stimuli brought by a short computer video showing forest environments, with an urban video as a control. Randomly selected participants were assigned the forest or urban video, to look at and listen early in the morning, and filled questionnaires. In particular, the State-Trait Anxiety Inventory (STAI) Form Y, collected in baseline condition and at the end of the study, and the Part II of the Sheehan Patient Rated Anxiety Scale (SPRAS), collected every day immediately before and after watching the video. The virtual exposure to forest environments showed effective to reduce perceived anxiety levels in in people forced by lockdown in limited spaces and environmental deprivation. Although significant, the effects were observed only in the short term, highlighting the limitation of the virtual experiences. The reported effects might also represent a benchmark to disentangle the determinants of health effects due to real forest experiences, for example, the inhalation of biogenic volatile organic compounds (BVOC).

The transport sector in Germany causes one-quarter of energy-related greenhouse gas emissions. One potential solution to reduce these emissions is the use of battery electric vehicles. Although a number of life cycle assessments have been conducted for these vehicles, the influence of a transport system wide transition has not been researched sufficiently. Therefore, we developed a method which combines life cycle assessment with an agent-based transport simulation and synthetic electric, diesel and gasoline powered vehicle models. We use the transport simulation to obtain the number of vehicles, their lifetime mileage and road-specific consumption. Subsequently we analyze the product systems’ vehicle production, use phase and End-of-Life. The results are scaled depending on the covered distance, the vehicle weight and the consumption for the whole life cycle. The results indicate that the sole transition of drive trains is insufficient to significantly lower the greenhouse gas emissions. However, sensitivity analyses demonstrate that there is a considerable potential to reduce greenhouse gas emissions with higher shares of renewable energies, a different vehicle distribution and a higher lifetime mileage. The method facilitates the assessment of the ecological impacts of the complete car based transportation in urban agglomerations and is able to analyze different transport sectors.

The rising incidence of complex illnesses and their costs have revolutionized basic research, patient management, and societal needs. Between 70 to 90% of the risk of developing a disease is due to the air we breathe, the water we drink, and the surroundings in which we work and live. Visibly polluted, infectious or not, the fact remains that we are more than ever exposed to environmental risks. Air pollution is the fourth most prevalent deadly risk factor worldwide and by far the leading risk factor for hundreds of diseases, including respiratory infections, inflammatory illness, and cancer. Thus, an unhealthy environment can be considered as a pandemic, affecting 280 million people and claiming 12 million deaths every year. Although critical for identifying of the people at risk, the causal environment components (pollutants and/or the microbiome), and the affected physiological mechanisms are not well understood. Herein, we consider the dysregulation of macroautophagy (hereafter referred to as ‘autophagy’), as the mechanism at the heart of an immediate response to environmental stress. We discuss the missing link between the autophagy gene variations, and the exposome in the susceptibility, prognosis, and management of complex diseases when embracing personalized medicine.

Surfactants based on polyfluoroalky ethers are commonly used in fire-fighting foams on airport platforms, including for training sessions. Because of their persistence into the environment, their toxicity and their bioaccumulation, abnormal amounts can be found in ground and surface water following operations of airport platforms. As many other anthropogenic organic compounds, some concerns raised about their biodegradation. That is why the OECD 301 F protocol was implemented to appreciate the oxygen consumption during the biodegradation of a commercial fire-fighting foam. However, a Raman spectroscopic monitoring of the process was also attached to this experimental procedure to evaluate to what extent a polyfluoroalkyl ether disappeared from the environmental matrix. The relevance of our approach is to use chemometrics, including the Principal Component Analysis (PCA) and the Partial Least Square (PLS), in order to monitor the kinetics of the biodegradation reaction of one fire-fighting foam, Tridol S3B, containing a polyfluoroalkyl ether. This study provided a better appreciation of the partial biodegradation of some polyfluoroalkyl ethers by coupling Raman spectroscopy and chemometrics. This will ultimately facilitates the design of a future purification and remediation devices for the airport platforms.

Considering citizens' perceptions of their living environment is very helpful in making the right decisions for city planners who intend to build a sustainable society. Mental map analyses are widely used in understanding the level of perception of individuals regarding the surrounding environment. The present study introduces Aram Mental Map Analyzer (AMMA), an open-source program, which allows researchers to use special features and new analytical methods to receive outputs in numerical data and analytical maps with greater accuracy and speed. AMMA performance is contingent upon two principles of accuracy and complexity, the accuracy of the program is measured by Accuracy Placed Landmarks (APL) and General Orientation (GO), which respectively analyses the landmark placement accuracy and the main route mapping accuracy. Also, the complexity section is examined through two analyses Cell Percentage (CP) and General Structure (GS), which calculates the complexity of citizens’ perception of space based on the criteria derived from previous studies. AMMA examines all the dimensions and features of the graphic maps, and its outputs have a wide range of valid and differentiated information, which is tailored to the research and information subject matter that is required.

In the last decades there has been a progressive aging of the population, known as “demographic revolution” or “demographic transition”. As a consequence of the worldwide progressive aging of population and of the increasing of general life expectancy, the relationship between aging and disability became a very important one and received a huge interest in research for its consequences on participation, inclusion and quality of life of ageing people and for its consequences on socio-sanitary organizations. The aim of this paper is to analyze this relationship and to discuss consequences on participation, inclusion and quality of life of ageing people, according to recent conceptual models of disability and active ageing. According to previous papers this relationship could be considered in two ways: ageing with disability (which refers to people living with long-term effects of disabling conditions acquired from birth to middle age) and disability with ageing (which refers to people which disabling conditions acquired later or age-related conditions), but newer papers proposed a convergence of these two approaches, taking into account the similarities and the differences between the two ways.

This study addresses the latent construct of attitudes towards environmental conservation based on study participant’s responses. We measured and evaluated the latent scale based on an 18-item scale instrument, over four experimental strata (N=945) in the US Virgin Islands and the Caribbean. We estimated the latent scale reliability and validity. We further fitted multiple alternative two-parameter logistic (2PL) and graded response models (GRM) from Item-Response Theory. We finally constructed and fitted equivalent structural and generalized structural equation models (SEM/GSEM) for the attitudinal latent scale. All scale measures (composite, alpha-based, IRT-based and SEM-based) were consistently and reliably valid measures of the study participants’ latent attitudes toward conservation. We found statistically significant differences among participant’s attributes relating to socio-demographic, physical and core environmental characteristics of participants. We assert that the nature of relationship between cognitive attitudes and individual as well as social behavior related to environmental conservation.

ETS exposure has been shown as an important environmental risk factor in vulnerable population groups. The aim of the project is to analyze the relationships among the ETS and behavior and health in 6−15-year-old children in Slovakia. The status of physical and mental health of children in relation to exposure to tobacco smoke was examined in the representative group of 1478 school children. The methods used, included anonymous questionnaires filled in by parents, Columbia Impairment Scale (CIS), Behavior Problem Index (BPI) and anthropometry. The prevalence of passive smoking is the highest in the capital (27%) and southern cities. Significant relationships have been confirmed between ETS and the age, socio-economic status, the incompleteness of the family, the level of mother's education and the significantly higher prevalence of respiratory diseases (26.7%).The relationships of ETS with emotional (CIS scores ≥16) and behavioral functions (BPI score ≥14) were significant in children exposed to mother‘s and father‘s smoking at home. In the multivariate analysis this association was not significant; the factors such as income and completeness of the family were dominant. The results confirmed the impact of ETS and social factors on health state and health behavior and could be the argumentation for legislative changes.

Relying on Random Utility Theory (RUT) as the guiding mechanism for the Data Generating Process (DGP), this paper uses households consumption choices on cooking fuel, drinking water, and sanitation from the 2014 United States Agency for International Development's (USAID) Demographic and Health Survey (DHS) data on Burkina Faso, to characterize and investigate the inter-linkages between health consciousness and environmental consciousness, and their relationship with wealth in a low income country context. We achieve this by specifying sequentially three econometric modeling frameworks: the first one being independent binary probit (IBP) models to describe each choice process, followed by a fully parametric trivariate probit (FPTP) model to account for choice dependency, and finally by a semi-parametric trivariate probit (SPTP) model to further relax the linearity assumption. Based on the Akaike Information criteria (AIC) and the estimated Trivariate model correlation coefficients, the SPTP framework is found to be the best specification for describing the observed consumption behaviors. The results show that increased wealth level raises households health and environmental consciousness, while leaving the relative preference ordering over the elements in the household consumption basket unchanged.

Starting from accelerated industrial development, industrial disasters (chemical spills, explosions, nuclear accidents, etc.), which fall under man-made (technological) disasters, increasingly threaten human lives, the environment, and property. Their complexity and far-reaching consequences, both at the local and global levels, require effective management of industrial risks and the disasters themselves (preparedness, mitigation, response, and recovery). For these reasons, the review paper aims to provide a holistic description of the diverse causes, dynamics, and multidimensional consequences of disasters. Additionally, it highlights and explains the key factors that directly or indirectly contribute to their occurrence. Furthermore, it could be said that the paper analyzes existing strategies for managing risks from industrial disasters and systematizes recommendations for improving preventive and reactive measures in high-risk industries. On the other side, the paper utilizes a comprehensive literature review, which involves the systematic identification, review, analysis, and critical evaluation of existing scientific papers, studies, reports, and regulatory documents on industrial disasters. Besides that, it also includes a detailed analysis of well-known industrial disaster cases such as Seveso (Italy, 1976), Bhopal (India, 1984), Chernobyl (Ukraine, then USSR, 1986), and Fukushima (Japan, 2011). The paper emphasizes that industrial disasters are often the result of the combined influence and interaction of technical failures, human errors, and inadequately developed safety procedures. Moreover, it can be highlighted that the design and implementation of preventive measures, such as regular maintenance of technical systems and systematic training and education of employees, are crucial for reducing the likelihood of such catastrophic events. The implications of this review paper are multifaceted and point to the following: the need to reassess current safety practices in industries; reconsider the potential for introducing innovations in preventive technical-technological solutions; examine the thorough implementation of innovative early warning systems, safety procedures, and modern equipment in facilities; improve cooperation between engineers, safety managers, and regulatory workers; reassess the need for additional updates and tightening of regulations regarding the storage, transport, and use of hazardous materials in industry; and improve the management of risks from industrial disasters.