Biomass burning is an important and changing component of the global and hemispheric carbon cycles. Boreal forest fires in Russia and Canada are significant sources of greenhouse gases carbon dioxide (CO2) and methane (CH4). The influence of carbon monoxide (CO) on the greenhouse effect is practically absent: its main absorption bands of 4.6 and 2.3 μm are far away from the climatically important spectral regions. Meanwhile, CO concentrations in fire plumes are closely related to CO2 and CH4 emissions from fires. On the other hand, satellite measurements of CO are much simpler than those for the aforementioned gases. The Atmospheric Infrared Sounder (AIRS) provides a satellite-based CO data set since October, 2002 up to now. This communication presents estimates of CO emissions from biomass burning north of 30° N using a simple two-box mass-balance model. These results correlate closely with independently estimated CO emissions from the GFED4 bottom-up data base. Both ones reported record high emissions in 2021 throughout two decades, double the annual emissions comparing to the previous years. There have been two years with extremely high emissions (2003 and 2021), but for the rest of data upward trend with a rate of 3.6 ± 2.2 Tg CO yr-2 (4.8 ± 2.7% yr-1), was found. A similar rate of CO emission follows from the GFED4 data.

Data augmentation techniques recently gained more adoption in speech processing, including speech emotion recognition. Although more data tends to be more effective, there may be a trade-off in which more data will not provide a better model. This paper reports experiments on investigating the effects of data augmentation in speech emotion recognition. The investigation aims at finding the most useful type of data augmentation and the number of data augmentations for speech emotion recognition. The experiments are conducted on the Japanese Twitter-based emotional speech corpus. The results show that for speaker-independent data, two data augmentations with glottal source extraction and silence removal exhibited the best performance among others, even with more data augmentation techniques. For the text-independent data (including speaker and text-independent), more data augmentations tend to improve speech emotion recognition performances. The results highlight the trade-off between the number of data augmentation and the performance of speech emotion recognition showing the necessity to choose a proper data augmentation technique for a specific application.

Photoplethysmography is a widely used technique to noninvasively assess heart rate, blood pressure, and oxygen saturation. This technique has a large potential for further applications, for example in the field of physiological and mental health monitoring. However, advanced applications of photoplethysmography have been hampered by the lack of accurate and reliable methods to analyze the characteristics of the complex nonlinear dynamics of the photoplethysmogram. Methods of nonlinear time series analysis may be used to estimate the dynamical characteristics of the photoplethysmogram but they are highly influenced by the length of the time series, which is often limited in practical photoplethysmography applications. The aim of this study was to evaluate the error in the estimation of the dynamical characteristics of the photoplethysmogram associated to the limited length of the time series. The dynamical properties were evaluated using recurrence quantification analysis, and the estimation error was computed as a function of the length of the time series. Results demonstrated that properties such as de-terminism and entropy can be estimated with an error lower than 1% even for short photople-thysmogram recordings. Additionally, the lower limit for the time series length to estimate the average prediction time was computed.

Biomass burning is an important and changing component of the global and hemispheric carbon cycles. In particular, boreal forest fires in Russia and Canada are important sources of greenhouse gases carbon dioxide (CO2) and methane (CH4). The influence of carbon monoxide (CO) on the climate is insignificant: its main absorption bands of 4.6 and 2.3 μm are far away from the climatically important regions of the spectrum. Meanwhile, CO concentrations in fire plumes are closely related to CO2 and CH4 emissions from fires. On the other hand, satellite measurements of CO are much simpler than those for the aforementioned gases. The Atmospheric Infrared Sounder (AIRS) provides a long satellite-based CO data set. This article presents estimates of CO emissions from biomass burning north of 30° N using a simple two-box model. These results correlate closely with independently estimated CO emissions from the GFED4 bottom-up data base. Both ones reported record high emissions in 2021 throughout two decades, double the annual emissions comparing to the previous a few years. There have been several years with extreme emissions, but for the rest of data upward trend with a rate of 3.7 ± 2.3 Tg CO yr-2 (4.4 ± 2.8% per year), was found.

In many countries, governments have implemented non-pharmaceutical techniques to limit COVID-19 transmission. Restricting human mobility is one of the most common interventions, including lockdown, travel restrictions, working from home, etc. However, due to the strong transmission ability of the virus variants, further rounds of interventions, including a strict lockdown, are not considered as effective as expected. The paper aims to understand how the lockdown policy and pandemics changed human mobility in the real scenario. Here we focus on understanding the mobility changes caused by compliance with restrictions and risk perceptions, using the mobility index from the Google report during three strict lockdown periods in Leeds, the largest city in the county of West Yorkshire, England from March 2020 to March 2021. The research proposed the time-varying z-scores and Principal Component Analysis (PCA) to simulate how local people dynamically process and perceive health risk based on multi-dimensional daily COVID-19 reports first. Further modelling highlights exponentially increasing policy non-compliance through the duration of lockdown, probably attributable to factors such as mental anxiety and economic pressures. Finally, the proposed nonlinear regression model examines the mobility changes caused by the population's dynamic risk perceptions and lockdown duration. The case study at Leeds fits data well and shows that the third lockdown policy took effect much slower than the first. At the same time, the negative impact of the epidemic on population mobility decayed 40% in the third lockdown period in contrast with the first lockdown. The risk perception estimation methods could reflect that the local population became increasingly accustomed to the COVID-19 situation, and local people rationally evaluated the risks of COVID in the third lockdown period. The results prove that simulated risk perceptions and policy decay could explain urban mobility behaviour during the mobility well during lockdown periods, which could be a reference for future decision-making processes.

In recent years supply chains have evolved into huge ecosystems, demanding trust, provenance, and data privacy. Since blockchain technology (BCT) allows for the development of a distributed environment, it is ideal for supply chain management (SCM) applications. However, concerns regarding data privacy have impeded the development of blockchains. Despite the fact that some blockchains can restrict participants to read and write data, the blockchain’s transparency makes protecting sensitive data challenging. To solve the data privacy challenge, this paper proposes a framework, AccessChain, that is an SCM access control framework based on an attribute-based access control (ABAC) model that restricts access to competing parties while allowing for network scalability. This proposed AccessChain model has two types of ledgers in the system: local and global. Local ledgers are used to store business contracts between stakeholders and the ABAC model management, whereas the global ledger is used to record transaction data. AccessChain can enable decentralized, fine-grained and dynamic access control management in SCM when combined with the ABAC model and BCT. This paper’s experimental results illustrate that high throughput can be achieved in a large-scale request environment while maintaining data privacy and sustaining a scalable network.

Today, across the most critical problems faced by hospitals and health centers are those caused by the existence of patients who do not attend their appointments. Among others, this practice generates waste of resources and increases the patients’ waiting list. To handle these problems, hospitals are actively trying to implement methods to reduce the idle time caused by patient no-shows. Many scheduling systems developed require predicting whether a patient will show up for an appointment or not. Although, a challenging problem resides in obtaining these estimates precisely. The goal of this work is to analyze how objective factors influence a patient not to attending their appointment, to identify the main causes that contribute to a patient’s decision, and to be able to predict whether or not the patient will attend the scheduled appointment. As a result, the obtained model is tested on a real dataset collected in a health center linked to the University of Vale do Itajaí (UNIVALI), which includes 25 features and about 5000 samples. The algorithm that produced the best results for the available dataset is the Random Forest classifier. It reveals the best recall rate (0.91), since it measures the ability of a classifier to find all the positive instances and achieves a receiver operating characteristic curve rate of 0.969.

Climate risk is one of the confronting factors in Indian agriculture. To overcome this distrust, a large number of sensors can be installed in the fields,The extensive IoT platform can process the data sent by these sensors.The Data stream can be processed in real-timeusing Fuzzylogic, to offer smart solution. Network coding can enhance throughput and security. Thus reducing human interaction and improve efficiency.

Climate risk is one of the confronting factors in Indian agriculture. To overcome this distrust, a large number of sensors can be installed in the fields,The extensive IoT platform can process the data sent by these sensors.The Data stream can be processed in real-timeusing Fuzzylogic, to offer smart solution. Network coding can enhance throughput and security. Thus reducing human interaction and improve efficiency.

Although the universal health coverage (UHC) is pursued by many countries, not all countries with UHC include dental care as their benefits. Japan, with its long-held tradition of UHC, has covered dental care as essential benefit and majority of dental care services are provided to all patients with minimal copayment. Being under the UHC, the scope of services as well as prices are regulated by the uniform fee schedule and dentists submit claims according to the uniform format and fee schedule. The author analyzes the publicly available dental health insurance claims data as well as a sampling survey on dental hygiene and illustrates how Japan’s dental care is responding to the challenges of the population ageing.

Metaheuristic algorithms have been frequently using to tackle optimization problems, however such algorithms in the analysis of health-related data is not commonly used as developing metaheuristic algorithms that work well on health-related data is a difficult task due to complexity of the health data in particular genomics and epigenetics data. One of the important tasks in genomics is to predict genomic elements that are incorporating together to regulate a disease-related genes. Predicting such elements are important as they can be used to develop a personalized cure. In this study, we present for the first time, a multi-object simulated annealing algorithm to identify enhancer-promoter like interactions from Hi-C (chromosome conformation capture) data. These regulatory elements can potentially play vital roles as promoters and/or enhancers in appearance and exacerbation of the regulation of gene.s To evaluate the efficiency of the proposed method, we applied our proposed method and traditional methods on the Hi-C data from mice and compared together. Our results show that the interacting elements identified by our new method are more likely to be functional. The source code of the method is publicly available.

Over the past decade, China has witnessed fast-paced technological advancements in the media industry, as well as major shifts in the health agenda portrayed in the media. Therefore, a key starting point when discussing health communication lies in whether media attention and public attention towards health issues are structurally aligned, and to what extent the news media guide public attention. Based on data mined from 73,060 sets of the Baidu Search Index and Media Index on 20 terms covering different types of cancer from 2011 to 2020, the Granger test demonstrates that, in the last decade, public attention and media attention towards cancer in China has gone through two distinct phases. During the first phase, 2011-2015, Chinese news media still held the key in transferring the salience of issues on most cancer types to the public. In the second phase, from 2016-2020, public attention towards cancer has gradually diverged from media coverage, mirroring the imbalance and mismatch between the demand of active public and the supply of cancer information from news media. This study provides an overview of the dynamic transition on cancer issues in China over a ten-year span, along with descriptive results on public and media attention towards specific cancer types.

When in doubt, asking a peer can be very helpful. Students learn a lot of social strategies from peers. However, stated preference studies [Newman, 1993] have found that for elementary school students with math questions they prefer to ask the teacher. In this paper, we study revealed preferences instead of stated preferences. We analyze the behavior of fourth-grade students seeking face-to-face assistance while working on an online math platform. Students start by working independently on the platform before the teacher selects two or three tutors from among those who have answered 10 questions correctly. Each student is then able to choose between the teacher or one of these tutors when requesting assistance. We study the students’ preferences over 3 years, involving 88 fourth-grade classes, 2,700 students, 1,209 sessions with classmate tutors, and a total of 16,485 requests for help when there was an option to choose between a teacher or a classmate. We found that students prefer asking classmates for help 3 times more than asking their teachers when given the choice. Furthermore, this gap increases from the first to the second semester. We also found that students prefer to request help from classmates of the same sex and of higher academic performance. In this sense, students from the two highest tertiles sought help from classmates in the same two tertiles, and students from the medium tertile prefer to seek help from students of the highest tertile. However, students in the two lowest tertiles do not prefer asking for help from students from the top tertile more than from their own tertiles.

Background: We aimed to assess the risk of chemotherapy- and radiotherapy-related cognitive impairment in colorectal cancer patients. Methods: We randomly selected 40% of colorectal cancer patients from Korean National Health Insurance Database (NHID), 2004-2018 (N=148,848). Patients with one or more ICD-10 diagnostic codes for dementia or mild cognitive impairment was defined as cognitive impairment cases. Patients who were aged 18 or younger, diagnosed with cognitive impairment before colorectal cancer (N=8,225) and did not receive primary resection (N=45,320) were excluded. The effects of each chemotherapy agent on cognitive impairment were estimated. We additionally estimated the effect of radiotherapy in rectal cancer patients. Time-dependent competing risk Cox regression was conducted to estimate overall and age-specific hazard ratios (HR) separately for colon and rectal cancer. Results: In colon cancer, capecitabine and irinotecan was associated with higher cognitive im-pairment, while 5-fluorouracil was not. In rectal cancer, no chemotherapy agents increased the risk of cognitive impairment, nor did radiotherapy. Hazardous association of irinotecan was estimated larger in elderly patients compared with younger counterparts. Conclusion: Heterogeneous associations between various chemotherapy agents and cognitive impairment were observed. Elderly patients were more vulnerable to possible adverse cognitive effects. Radiotherapy did not increase the risk of cognitive impairment.

Buyer practices have changed as individuals are figuring out how to live with the new truth of COVID-19. Take-out and conveyance orders have expanded, and our customer has added new items to their menu because of new client inclinations. With every one of the continuous changes, the customer had numerous unanswered inquiries, for example, Smartbridge has broad involvement with café innovation development Café TECHNOLOGY CAPABILITIES :Are the most famous items as yet unchanged after COVID? :Which are the most sold item blends now? :What is the acknowledgment of new things? :What are clients purchasing alongside new things? :How have liquor deals changed? The customer previously had reports that followed item deals and operational measurements, notwithstanding, there was a need to get a more profound knowledge into item examination. The customer expected to recognize what items and introductions were being sold all the more frequently, measure the acknowledgment of new items, and figure out what items clients buy together to improve advertising efforts, advancements, and deals. he E-business industry is filling immensely in the Indian market. The modest 4G web bundles in India clearly gives a push to these ventures. Thus, as Covid19 first hit in Quite a while, individuals got terrified to go out from their homes in light of the fact that, in their mind, it's a dread of Covid. They even wonder whether or not to go out to purchase fundamental (FMCG) products. Frenzy purchasing additionally has seen and to stay away from this dread of COVID-19, individuals are offering inclinations to the E-Commerce destinations to purchase fundamental products and a few clients are new which joined to purchase fundamental merchandise during this Pandemic Lockdown period. Numerous clients are moving their purchasing conduct from disconnected retail locations to online stores. This paper examines the customer buying pattern during lockdown.

In this work, the thermodynamic data basis and EOS modeling necessary to simulate the fractionation of organic liquid products (OLP), a liquid reaction product obtained by thermal catalytic cracking of palm oil at 450ºC, 1.0 atmosphere, with 10% (wt.) Na2CO3 as catalyst, in multistage countercurrent absorber/stripping columns using SC-CO2 as solvent, with Aspen-Hysys was systematically investigated. The chemical composition of OLP was used to predict the physical (), thermo-physical properties (Tb, Tc, Pc, Vc), and acentric factor () of all the compounds present in OLP by applying the group contribution methods of Marrero-Gani, Han-Peng, Marrero-Pardillo, Constantinou-Gani, Joback and Reid, and Vetere. The RK-Aspen (EOS) used as thermodynamic fluid package, applied to correlate the experimental phase equilibrium data of binary systems organic liquid products compounds (OLP)-i/CO2 available in the literature. The group contribution methods selected based on the lowest relative average deviation by computing Tb, Tc, Pc, Vc, and . For n-alkanes, the method of Marrero-Gani selected for the prediction of Tc, Pc and Vc, and that of Han-Peng for . For alkenes, the method of Marrero-Gani selected for the prediction of Tb and Tc, Marrero-Pardillo for Pc and Vc, and Han-Peng for . For unsubstituted cyclic hydrocarbons, the method of Constantinou-Gani selected for the prediction of Tb, Marrero-Gani for Tc, Joback for Pc and Vc, and the undirected method of Vetere for . For substituted cyclic hydrocarbons, the method of Constantinou-Gani selected for the prediction of Tb and Pc, Marrero-Gani for Tc and Vc, and the undirected method of Vetere for . For aromatic hydrocarbon, the method of Joback selected for the prediction of Tb, Constantinou-Gani for Tc and Vc, Marrero-Gani for Pc, and the undirected method of Vetere for . The regressions show that RK-Aspen EOS was able to describe the experimental phase equilibrium data for all the binary pairs undecane-CO2, tetradecane-CO2, pentadecane-CO2, hexadecane-CO2, octadecane-CO2, palmitic acid-CO2, and oleic acid-CO2, showing average absolute deviation (AADx) between 0.8% and 1.25% for the liquid phase and (AADy) between 0.01% to 0.66% for gaseous phase.

Studies have shown that in many practical applications, data interpolation by splines leads to better approximation and higher computational efficiency as compared to data interpolation by a single polynomial. Data interpolation by splines can be significantly improved if knots are allowed to be free rather than at a priori fixed locations such as data points. In practical applications, the smallest possible curvature is often desired. Therefore, optimal splines are determined by minimizing a derivative of continuously differentiable functions comprising the spline of the required order. The problem of obtaining an optimal spline is tantamount to minimizing derivatives of a nonlinear differentiable function over a Banach space on a compact set. While the problem of data interpolation by quadratic splines has been accomplished analytically, interpolation by splines of higher orders or in higher dimensions is challenging. In this paper, to overcome difficulties associated with the complexity of the interpolation problem, the interval over which data points are defined, is discretized and continuous derivatives are substituted by their discrete counterparts. It is shown that as the mesh of the discretization approaches zero, a resulting near-optimal spline approaches an optimal spline. Splines with the desired accuracy can be obtained by choosing an appropriate mesh of the discretization. By using cubic splines as an example, numerical results demonstrate that the linear programming (LP) formulation, resulting from the discretization of the interpolation problem, can be solved by linear solvers with high computational efficiency and resulting splines provide a good approximation to the optimal splines.

The paper summarizes in a step by step ‘recipe’ format a model of developing new ideas (Ideation) that can be used to form a new venture or develop a new product. The proposed ‘recipes’ are widely used and can be applied in tandem with other prevalently available models or tools. The intention of the paper is also to serve as a resource for entrepreneurs and innovators, and the links and references munificently used in the paper are serving this purpose. The author has used the outline and the tools described here in numerous Ideation classes taught for over a decade in several countries around the world. The paper’s intention is not to conduct a systematic review on the subject of new venture creation or propose new research agenda (for that, see for example Shepherd et al., 2021). The purpose is to provide an effective and efficient set of tools, models and techniques that can assist the entrepreneur in her journey to create and achieve her dreams. One such tool is the matrix of Reasonings-Outcomes introduced here for the first time.

This paper provides an open dataset of measured energy use, solar energy production, and building air leakage data from a 328 m² (3,531 ft²) all-electric, zero energy commercial building in Virginia, USA. Over two years of energy use data were collected at 1-hour intervals using circuit-level energy monitors. Over six years of solar energy production data were measured at 1-hour intervals by 56 microinverters. The building air leakage data was measured post-construction per ASTM-E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization and the United States Army Corps (USACE) Building Enclosure Testing procedure; both pressurization and depressurization results are provided. The architectural and engineering (AE) documents are provided to aid researchers and practitioners in reliable modelling of building performance. The paper describes the data collection methods, cleaning, and convergence with weather data. This dataset can be employed to predict, benchmark, and calibrate operational outcomes in zero energy commercial buildings.

A global event such as the COVID-19 crisis presents new, often unexpected responses that are fascinating to investigate from both, scientific and social standpoints. Despite several documented similarities, the Coronavirus pandemic is clearly distinct from the 1918 flu pandemic in terms of our exponentially increased, almost instantaneous ability to access/share information, offering an unprecedented opportunity to visualise rippling effects of global events across space and time. Personal devices provide “big data” on people’s movement, the environment and economic trends, while access to the unprecedented flurry in scientific publications and media posts provides a measure of the response of the educated world to the crisis. Most bibliometric (co-authorship, co-citation, or bibliographic coupling) analyses ignore the time dimension, but COVID-19 has made it possible to perform a detailed temporal investigation into the pandemic. Here, we report a comprehensive network analysis based on more than 20000 published documents on viral epidemics, authored by over 75,000 individuals from 140 nations in the past one year of the crisis. In contrast to the 1918 flu pandemic, access to published data over the past two decades enabled a comparison of publishing trends between the ongoing COVID-19 pandemic and those of the 2003 SARS epidemic, to study changes in thematic foci and societal pressures dictating research over the course of a crisis.

Abstract:Global ship demolition is mostly concentrated in south Asian countries, namely Bangladesh, India, Pakistan and China, since 1990’s, having competitive advantage for their high natural tide, and low environmental and social costs. Due to high social and environmental externalities, stakeholders increase monitoring of the externalities and continue to prescribe improvement towards sustainability, which put pressures on profitability and competitiveness. As a consequence, also seen in the past, a leakage effect may emerge, leading to shift of this activity to a region, with relatively less monitored and less stricter on social and environmental impacts. Unfortunately, the leakage effect is never predicted in shipbreaking in order to understand the level of push compatible in the given socio-economic contexts. In this study, we have attempted to predict the future ship demolition landscape, applying machine learning technique to 34,531 in-service vessels worldwide, larger than 500 gross tonnage (GT), which is run against a learning model based on 3500 demolished vessels from 2014. This study shows that redistribution may occur among the top recycling nations: India may emerge out to be a dominant player in shipbreaking, surpassing Bangladesh by a margin of two-fold, while Pakistan and China are in decreasing trend. In addition, the leakage effect is observed, in that Vietnam is predicted to be the fourth largest ship demolition country, while China and Pakistan recede from the third and fourth place to 6th and 8th. Turkey is predicted to advance from fifth position to third position by vessel count but stays same in term of total GT dismantled. Although it is not clear if any leakage is to be observed in the near future, this study may be a model for future predictive analytics and help stakeholders take evidence-based business decisions.

This paper presents a new framework to classify floor plan elements and represent them in a vector format. Unlike existing approaches using image-based learning frameworks as the first step to segment the image pixels, we first convert the input floor plan image into vector data and utilize graph neural network. Our framework consists of three steps. (1) image pre-processing and vectorization of the floor plan image. (2) region adjacency graph conversion. (3) graph neural network on converted floor plan graphs. Our approach is able to capture different types of indoor elements including basic elements such as walls, doors, and symbols as well as spatial elements such as rooms and corridors. In addition, the proposed method can also detect element shapes. Experimental results show that our framework can classify indoor elements with an F1 score of 95%, with scale and rotation invariance. Furthermore, we propose a new graph neural network model that takes the distance between nodes into account, which is a valuable feature of spatial network data.

In an effort to upgrade and provide a unified and improved instrument control and data acquisition system for the ORNL SANS instrument suite (Bio-SANS, EQ-SANS, GP-SANS), beamline scientists and developers teamed up and worked closely together to design and develop a new system. We began with an in-depth analysis of user needs and requirements, covering all perspectives of control and data acquisition based on previous usage data and user feedback. Our design and implementation were guided by the principles from the latest user experience and design research and based on effective practices from our previous projects. In this article, we share details of our design process as well as prominent features of the new instrument control and data acquisition system. The new system provides a sophisticated Q-Range Planner to help scientists and users plan and execute instrument configurations easily and efficiently. The system also provides different user operation interfaces, such as wizard-type tool Panel Scan, a Scripting Tool based on Python Language, and Table Scan, all of which are tailored to different user needs. The new system further captures all the metadata to enable post-experiment data reduction and possibly automatic reduction and provides users with enhanced live displays and additional feedback at the run time. We hope our results will serve as a good example for developing a user-friendly instrument control and data acquisition system at large user facilities.

Advances in machine learning (ML) and artificial intelligence (AI) are transforming the way we treat patients in ways not even imagined a few years ago. Cancer research is at the forefront of this movement. Infertility, though not a life-threatening condition, affects around 15% of couples trying for a pregnancy. Increasing availability of large datasets from various sources creates an opportunity to introduce ML and AI into infertility prevention and treatment. At present in the field of assisted reproduction, very little is done in order to prevent infertility from arising, with the main focus put on treatment when often advanced maternal age and low ovarian reserve make it very difficult to conceive. A shift from this disease-centric model to a health centric model in infertility is already taking place with more emphasis on the patient as an active participator in the process. Poor quality and incomplete data as well as biological variability remain the main limitations in the widespread and reliable implementation of AI in the field of reproductive medicine. That said, one of the areas where this technology managed to find a foothold is identification of developmentally competent embryos. More work is required however to learn about ways to improve natural conception, the detection and diagnosis of infertility, and improve assisted reproduction treatments (ART) and ultimately, develop clinically useful algorithms able to adjust treatment regimens in order to assure a successful outcome of either fertility preservation or infertility treatment. Progress in genomics, digital technologies and advances in integrative biology has had a tremendousimpact on research and clinical medicine. With the rise of ‘big data’, artificial intelligence, and the advances in molecular profiling, there is an enormous potential to transform not only scientific research progress, but also clinical decision making towards predictive, preventive, and personalized medicine. In the field of reproductive health, there is now an exciting opportunity to leverage these technologies and develop more sophisticated approaches to diagnose and treat infertility disorders. In this review, we present a comprehensive analysis and interpretation of different innovation forces that are driving the emergence of a system approach to the infertility sector. Here we discuss recent influential work and explore the limitations of the use of Machine Learning models in this rapidly developing area.

Forest planners have traditionally used expected growth and yield coefficients to predict future merchantable timber volumes. However, because climate change affects forest growth, the typical forest planning methods using expected value of forest growth can lead to sub-optimal harvest decisions. We proposed in this paper to formulate the harvest planning with growth uncertainty due to climate change problem as a multistage stochastic optimization problem and use sample average approximation (SAA) as a tool for finding the best set of forest units that should be harvested in the first period even though we have a limited knowledge of what future climate will be. The objective of the harvest planning model is to maximize the expected value of the net present value (NPV) considering the uncertainty in forest growth and thus in revenues from timber harvest. The proposed model was tested on a small forest with 89 stands and the numerical results showed that the approach allows to have superior solutions in terms of net present value and robustness in face of different climate scenarios compared to the approach using the expected growth and yield. The SAA methods requires to generate samples from the distribution of the random parameter. Our results suggested that a sampling scheme that focuses on generating high number of samples in distant future stages is favorable compared to having large sample sizes for the near future stages. Finally, we demonstrated that, depending on the level of forest growth change, ignoring this uncertainty can negatively affect forest resources sustainability.

In this work, we treat a prediction problem via the conditional hazard function of a scalar response variable Y given a functional random variable X by using the local linear technique. The main purpose of this paper is to investigate the asymptotic normality of the nonparametric estimator of the conditional hazard function, under some general conditions. A simulation study, conducted to assess finite sample behavior, demonstrates the superiority of our method than the standard kernel method

We present a class of efficient parametric closure models for 1D stochastic Burgers equations. Casting it as statistical learning of the flow map, we derive the parametric form by representing the unresolved high wavenumber Fourier modes as functionals of the resolved variables’ trajectory. The reduced models are nonlinear autoregression (NAR) time series models, with coefficients estimated from data by least squares. The NAR models can accurately reproduce the energy spectrum, the invariant densities, and the autocorrelations. Taking advantage of the simplicity of the NAR models, we investigate maximal and optimal space-time reduction. Reduction in space dimension is unlimited, and NAR models with two Fourier modes can perform well. The NAR model’s stability limits time reduction, with a maximal time step smaller than that of the K-mode Galerkin system. We report a potential criterion for optimal space-time reduction: the NAR models achieve minimal relative error in the energy spectrum at the time step where the K-mode Galerkin system’s mean CFL number agrees with the full model’s.

In the present work, we evaluate the prediction capability of six Pedotransfer functions (PTFs), reported in the literature, for the saturated hydraulic conductivity estimations (Ks). We used a database with 900 measured samples obtained from the Irrigation District 023, in San Juan del Rio, Queretaro, Mexico. Additionally, six new PTFs were construct for Ks from clay percentage, bulk density and saturation water content data. The results show, for the evaluated models, that one model present an overestimation for Ks>0.5 cm h-1 values, three models have a underestimation for Ks>1.0 cm h-1 and two models have a good correlation (R2>0.98) but are necessary more than three parameters. Nevertheless, the last two models requires from three to four parameters in order to get the optimization. By other hand, the models proposed in this work have a similar correlation with a less number of parameters: the fit is seen to be much better than using the existing ones, achieving a correlation of R2 = 0.9822 with only one variable and a R2 = 0.9901 when we use two.

With the outbreak of the COVID-19 disease, the research community is producing unprecedented efforts dedicated to better understand and mitigate the affects of the pandemic. In this context, we review the data integration efforts required for accessing and searching genome sequences and metadata of SARS-CoV2, the virus responsible for the COVID-19 disease, which have been deposited into the most important repositories of viral sequences. Organizations that were already present in the virus domain are now dedicating special interest to the emergence of COVID-19 pandemics, by emphasizing specific SARS-CoV2 data and services. At the same time, novel organizations and resources were born in this critical period to serve specifically the purposes of COVID-19 mitigation, while setting the research ground for contrasting possible future pandemics. Accessibility and integration of viral sequence data, possibly in conjunction with the human host genotype and clinical data, are paramount to better understand the COVID-19 disease and mitigate its effects.

Medical insurance claims are becoming increasingly common data sources to answer a variety of questions in biomedical research. Although comprehensive in terms of longitudinal characterization of disease development and progression for a potentially large number of patients, population-based studies using these datasets require thoughtful modification to sample selection and analytic strategies, relative to other types of studies. Along with complex selection bias and missing data issues, claims-based studies are purely observational, which limits effective understanding and characterization of the treatment differences between groups being compared. All these issues contribute to a crisis in reproducibility and replication of comparative findings. This paper offers some practical guidance to the full analytical process, demonstrates methods for estimating causal treatment effects on several types of outcomes common to such studies, such as binary, count, time to event and longitudinally varying repeated measures outcomes, and aims to increase transparency and reproducibility. We provide an online version of the paper with readily implementable code for the entire analysis pipeline to serve as a guided tutorial for practitioners. The online version can be accessed at https://rydaro.github.io/. The analytic pipeline is illustrated using a sub-cohort of patients with advanced prostate cancer from the large Clinformatics TM Data Mart Database (OptumInsight, Eden Prairie, Minnesota), consisting of 73 million distinct private payer insurees from 2001-2016.

Boolean functions and networks are commonly used in the modeling and analysis of complex biological systems, and this paradigm is highly relevant in other important areas in data science and decision making, such as in the medical field and in the finance industry. In a Boolean model, the truth state of a variable is either 0 or 1 at a given time. Despite its apparent simplicity, Boolean networks are surprisingly relevant in many areas of application such as in bioinformatics to model gene expressions and interactions. In the latter case, a gene is either ``on" or ``off" depending on its expression level. Despite the promising utility of Boolean modeling, in most practical applications the Boolean network is not known. Automated learning of a Boolean network and Boolean functions, from data, is a challenging task due in part to the large number of unknowns (including both the structure of the network and the functions) to be estimated, for which a brute force approach would be exponentially complex. In this paper we develop a new information theoretic methodology that we show to be significantly more efficient than previous approaches. Building on the recently developed optimal causation entropy principle (oCSE), that we proved can correctly infer networks distinguishing between direct versus indirect connections, we develop here an efficient algorithm that furthermore infers a Boolean network (including both its structure and function) based on data observed from the evolving states at nodes. We call this new inference method, Boolean optimal causation entropy (BoCSE), which we will show that our method is both computationally efficient and also resilient to noise. Furthermore, it allows for selection of a set of features that best explains the process, a statement that can be described as a networked Boolean function reduced order model. We highlight our method to the feature selection in several real-world examples: (1) diagnosis of urinary diseases, (2) Cardiac SPECT diagnosis, (3) informative positions in the game Tic-Tac-Toe, and (4) risk causality analysis of loans in default status. Our proposed method is effective and efficient in all examples.

According to the changed operative conditions due to lockdown and successive reopening a number of facts can be analysed. The main effects have been detected on: mobility, environment, social media and people flows. While in this first report only mobility, transport and environment are reported. The analysis performed identified a strong reduction of the mobility and transport activities, and in the pollutants. The mobility reduction has been assessed to be quite coherent with respect to what has been described by Google Global mobility report. On the other hand, in this paper a number of additional aspects have been put in evidence providing detailed aspects on mobility and parking that allowed us to better analyze the impact of the reopening on an eventual revamping of the infection. To this end, the collected data from the field have been compared from those of google and some considerations with respect to the Imperial college Report 20 have been derived. For the pollutant aspects, a relevant reduction on most of them has been measured and rationales are reported.

This study explores wind energy resources in different locations through the Gulf of Oman and also their future variability due climate change impacts. In this regard, EC-EARTH near-surface wind outputs obtained from CORDEX-MENA simulations are used for historical and future projection of the energy. The ERA5 wind data are employed to assess the suitability of the climate model. Moreover, the ERA5 wave data over the study area are applied to compute sea surface roughness as an important variable for converting near-surface wind speeds to those of wind speed at turbine hub height. Considering the power distribution, bathymetry and distance from the coats, some spots as tentative energy hotspots to provide a detailed assessment of directional and temporal variability and also to investigate climate change impact studies. RCP8.5 is a common climatic scenario is used to project and extract future variation of the energy in the selected sites. The results of this study demonstrate that the selected locations have a suitable potential for wind power turbine plans and constructions.

Soil temperature reflects the impact of local factors，such as vegetation，soil and the atmosphere of a region. Therefore, it is important to understand the regional variation of soil temperature. However, lack of observations with adequate spatial and/or temporal coverage, it would be difficult to use the observation data to study the regional variation. Based on the observation data from Nanchang and Ganzhou stations and ERA-Interim/Land reanalysis data, this study analyzed the temporal-spatial distribution characteristics of soil temperature over Poyang Lake Basin. The results showed close correlations between observation data and reanalysis data at different depths. Reanalysis data could mainly reproduce the temporal-spatial distributions of soil temperature over the Poyang Lake Basin, but generally underestimate their magnitudes. Temporally, there is an obvious warming trend in the basin. Seasonally, the temperature raised fastest in spring and slowest in summer, except for the ST4, which rising fastest in spring and slowest in winter. In terms of depths, the temperature of ST1 rises fastest. For the other layers, the warming trend is almost similar. An abrupt change of annual soil temperature at all depths occurred in 1997, and annual soil temperatures at all depths were abnormally low in 1984. Spatially, annual soil temperature decreased with latitude, except for the summer ST1. Because of the high temperature and precipitation in summer, the ST1 are higher around the lake and the river. The climatic trend of soil temperature presents the general increase trend from south to north, opposite to the distribution of soil temperature. The findings provide a basis for understanding and assessing the variation of the soil temperature over the Poyang Lake Basin.

Although Cucurbita pepo is one of the most variable species of the plant kingdom, Zucchini morphotype has undergone intensive breeding that has led to a narrow genetic base making the crop vulnerable to pest and diseases. This vulnerability makes the knowledge of resistance genes of utmost importance. In this study, a data mining search of Zucchini summer squash genome database was conducted to identify and annotate members of the NBS-encoding gene family. In order to characterize the retrieved genes in detail, they have been studied in the bases of phylogenetic relationships, structural diversity, conserved protein motifs, gene duplications and promoter region analysis. Our study shows that the NBS-encoding gene family is relatively small in Zucchini (34 members, which are separated into non-TIR- and TIR-NBS-LRR subfamilies) with a significantly lower number of R-genes than in other species. Duplications have not played a major role in the expansion of this type of genes in C. pepo. Among the cis-regulatory elements presented in these sequences, six motifs are over-represented. These elements were reported to be involved in pathogens or plant stress induced responses. These results will contribute to the identification, isolation and characterization of candidate R-genes, thereby providing insight into NBS gene family evolution in the species.

Although food retailers have embraced organic certified food products as a way to reduce their environmental loading, organic sales only make up a small proportion of total sales worldwide. Most consumers have positive attitudes towards organic food, but attitudes are not reflected in behaviour. This article addresses consumers’ attitude-behaviour gap regarding their purchase organic food and reports on how visualization of personal shopping data may encourage them to buy more organic food. Through the design of the visualization tool, the EcoPanel, and through an empirical study of its use, we provide evidence on the potential of the tool to promote sustainable food shopping practices. Sixty-five users tested the EcoPanel for five months and interviews were made with ten of these. The test users increased their purchase of organic food with 23%. The informants used the EcoPanel to reflect on their shopping behaviour and to increase their organic shopping. We conclude that the visualization of food purchases stimulates critical reflection and the formation of new food shopping practices. This implies that food retailers may increase sales of organic food through using a visualization tool available for their customers. In this way these retailers may decrease their environmental impact.

In this study, the decision-making process management of forest tending in the forestry business is decentralized, and forest tending decision-making activities at different points in time are integrated by decision makers at different geographical locations. The decision-making process was analyzed and optimized from a system perspective. Based on the optimized decision-making process, a forest tending business group decision support system (FTGDSS) was established. We first reviewed and discussed the characteristics and development of the forest tending business and forestry decision support system. Business Process Modeling Notation was used to draw a current state flow chart of the forest tending business, to identify and discover important decision points in the process of tending decision-making. We also analyzed the content and attributes of each decision point, and described the system structure, functional framework, knowledge base structure, and reasoning algorithm of FTGDSS in detail. Finally, FTGDSS was evaluated from the two dimensions of the technology adoption model. FTGDSS integrates different levels of time-space decision-making activities, historical tending data, business plans, decision-makers' management tendencies into the decision-making process and automatically extracts decision-making data from the forest business process management enterprise resource planning system (Smartforest) that improves the ease of use of the decision support system (DSS). It also improves the quality of forest tending decisions, and enables the DSS to better support multi-target management strategies.

Carvacrol has long been studied for its natural antifungal potential and food preservative. But the exact mode of its action remained highly complex as a general, but especially for Penicillium digitatum (P. digitatum) largely remained unexplored. Herein, a 1H-NMR-based metabolomic technique was used to investigate the antifungal mechanism of carvacrol. The metabolomic profiling data showed that alanine, aspartate, glutamate and glutathione metabolism were imbalanced in the fungal hyphae. A strong positive correlation was seen between aspartate, glutamate, alanine and glutamine, while negative correlation among glutathione and lactate. These metabolic changes revealed that carvacrol-induced oxidative stress had disturbed the energy production and amino acid metabolism of P. digitatum. Current study will improve the understanding of the metabolic changes posed by plant-based fungicides in order to control citrus fruit green mold caused by P. digitatum. Moreover, the study will provided certain experimental and theoretical basis for the development of novel citrus fruit preservatives.

The use of small Unmanned Aircraft Systems (sUAS ) as platforms for data capture has rapidly increased in recent years. However, while there has been significant investment in improving the aircraft, sensors, operations, and legislation infrastructure for such, little attention has been paid to supporting the management of the complex data capture pipeline sUAS involve. This paper reports on the outcomes of a four-year-long community-engagement-based investigation into what tools, practices, and challenges currently exist for particularly researchers using sUAS as data capture platforms. The key results of this effort are: (1) sUAS captured data – as a set that is rapidly growing to include data in a wide range of Physical and Environmental Sciences, Engineering Disciplines, and many civil and commercial use cases – is characterised as both sharing many traits with traditional remote sensing data and also as exhibiting – as common across the spectrum of disciplines and use cases – novel characteristics that require novel data support infrastructure. And (2), given this characterization of sUAS data and its potential value in the identified wide variety of use case, we outline eight challenges that need to be addressed in order for the full value of sUAS captured data to be realized. We then conclude that there would be significant value gained and costs saved across both commercial and academic sectors if the global sUAS user and data management communities were to address these challenges in the immediate to near future, so as to extract the maximal value of sUAS captured data for the lowest long-term effort and monetary cost.

Authorities define cities – or human settlements in general – through imposing top-down rules in terms of whether buildings belong to cities. Emerging geospatial big data makes it possible to define cities from the bottom up, i.e., buildings determine themselves whether they belong to a city based on the notion of natural cities that is defined based on head/tail breaks, a classification and visualization tool for data with a heavy-tailed distribution. In this paper, we used 125 million building locations – all building footprints of America (mainland) or their centroids more precisely – to derive 2.1 million natural cities in the country (http://lifegis.hig.se/uscities/). These natural cities – in contrast to government defined city boundaries – constitute a valuable data source for city-related research.

The role of the submission was to find out what changes people think they need to make in their home because of getting older. At advanced age, the likelihood of different limitations such as vision impairment, hearing impairment or physical inability is increased. Currently, tenants are often forced to leave their long-term living space, as these spaces cannot serve “new” individual needs. This transition from the privacy of their home to the new environment often appears to be a painful change. They will not have a well-known environment because their homes cannot be adapted to their new needs. The aim is a comprehensive approach to the design of such an exterior and interior space which could serve people at all stages of their life, including the terms of mobility. This means that even if there is an unexpected situation and changes in movement abilities and physiological limitations of man, not only by natural aging, but according to accidents or disabilities we can adapt the living space to the given conditions. The survey results are presented in Germany and Slovakia. In the survey, respondents expressed their opinion on what they considered important in creating an adaptive environment considering various life changes. Results are processed graphically with explanation. The results could be of an interest to architects and designers of the environment. Based on the results of the questionnaire survey, studies of possible modifications of flats and houses were developed. The contribution brought these results to three age groups of respondents; people aged 35, 50 and over 50.

Identifying group movement patterns of crowds and understanding group behaviors is valuable for urban planners, especially when the groups are special such as tourist groups. In this paper, we present a framework to discover tourist groups and investigate the tourist behaviors using mobile phone call detail records (CDRs). Unlike GPS data, CDRs are relatively poor in spatial resolution with low sampling rates, which makes it a big challenge to identify group members from thousands of tourists. Moreover, since touristic trips are not on a regular basis, no historical data of the specific group can be used to reduce the uncertainty of trajectories. To address such challenges, we propose a method called group movement pattern mining based on similarity (GMPMS) to discover tourist groups. To avoid large amounts of trajectory similarity measurements, snapshots of the trajectories are firstly generated to extract candidate groups containing co-occurring tourists. Then, considering that different groups may follow the same itineraries, additional traveling behavioral features are defined to identify the group members. Finally, with Hainan province as an example, we provide a number of interesting insights of travel behaviors of group tours as well as individual tours, which will be helpful for tourism planning and management.

The Social-Ecological Systems (SES) framework serves as a valuable framework to explore and understand social and ecological interactions, and pathways in water governance. Yet, it lacks a robust understanding of change. We argue an analytical and methodological approach to engaging global changes in SES is critical to strengthening the scope and relevance of the SES framework. Relying on SES and resilience thinking, we propose an institutional and cognitive model of change that institutions and natural resources systems co-evolve to provide a dynamic understanding of SES that stands on three causal mechanisms: institutional complexity trap, rigidity trap, and learning processes. We illustrate how Data Cube technology could overcome current limitations and offer reliable avenues to test hypothesis about the dynamics of social-ecological systems and water security by offering to combine spatial and time data with no major technical requirements for users.

The Square Kilometre Array (SKA) will be both the largest radio telescope ever constructed and the largest Big Data project in the known Universe. The first phase of the project will generate on the order of 5 zettabytes of data per year. A critical task for the SKA will be its ability to process data for science, which will need to be conducted by science pipelines. Together with polarization data from the LOFAR Multifrequency Snapshot Sky Survey (MSSS), we have been developing a realistic SKA-like science pipeline that can handle the large data volumes generated by LOFAR at 150 MHz. The pipeline uses task-based parallelism to image, detect sources, and perform Faraday Tomography across the entire LOFAR sky. The project thereby provides a unique opportunity to contribute to the technological development of the SKA telescope, while simultaneously enabling cutting-edge scientific results. In this paper, we provide an update on current efforts to develop a science pipeline that can enable tight constraints on the magnetised large-scale structure of the Universe.

The development and generalization of Digital Volume Correlation (DVC) on X-ray computed tomography data highlight the issue of long term storage. The present paper proposes a new model-free method for pruning the DVC data. The size of the remaining sampled data can be user-defined, depending on the needs concerning storage space. The data pruning procedure is deeply linked to hyper-reduction techniques. The DVC data of a resin-bonded sand tested in uniaxial compression is used as an illustrating example. The relevance of the pruned data is tested afterwards for model calibration. A new Finite Element Model Updating (FEMU) technique coupled with an hybrid hyper-reduction method is used to successfully calibrate a constitutive model of the resin bonded sand with the pruned data only.

Authentication systems based on biometrics characteristics and data represents one of the most important trend in the evolution of our world. In the near future, biometrics systems will be everywhere in the society, such as government, education, smart cities, banks etc. Due to its uniqueness characteristic, biometrics systems will become also vulnerable, privacy being one of the most important challenge. The classic cryptographic primitives are not sufficient to assure a strong level of secureness for privacy. The following work paper represents an effort to present the main cryptographic techniques and algorithms that can give us the possibility to raise a certain level of secureness for privacy. We will show their own challenges (strengths and weaknesses). We will demonstrate how we can use the most common and well-known techniques and algorithms in order to get a maximum efficiency and a high level in assuring the integrity of the biometrics data.

Topological Data Analysis (TDA) refers to a collection of methods that find the structure of shapes in data. Although recently, TDA methods have been used in many areas of data mining, it has not been widely applied to text mining tasks. In most text processing algorithms, the order in which different entities appear or co-appear is being lost. Assuming these lost orders are informative features of the data, TDA may play a significant role in the resulted gap on text processing state of the art. Once provided, the topology of different entities through a textural document may reveal some additive information regarding the document that is not reflected in any other features from traditional text processing methods. In this paper, we introduce a novel approach that hires TDA in text processing in order to capture and use the topology of different same-type entities in textural documents. First, we will show how to extract some topological signatures in the text using persistent homology-i.e., a TDA tool that captures topological signature of data cloud. Then we will show how to utilize these signatures for text classification.

The Circular Economy has been of growing significance within academic, policymaking and industry groups. Latest developments in the field of Circular Economy has led to an expansion of CE studies focused on interrogating CE as a paradigm, its relationship with sustainability and concepts and definitions of the Circular Economy. Research has also identified the significant potential of applying circular approaches to areas of the economy, including manufacturing and Industry 4.0, which, with data, is enabling latest the advances in digital technologies. This is the first review paper to integrate the fields of CE and digital technologies resulting in a framework which provides directions for policymakers and guidance for future research. To achieve this, we conduct a systematic literature review of the empirical literature related to digital technologies, industry 4.0 and circular approaches, from the point of the 9 Rs. The systematic literature review (SLR) is based on peer-reviewed articles published between 2000-2018. The findings reveal that while research on the circular economy has been on an annual rise, research on digital technologies enabled circular economy is still relatively an untouched area of research across all nine (9) circular approaches. As such this is an area rife for further research. This paper also presents illustrative charts and graphs to summarize the current trends in circular economy research in manufacturing. From this, a framework for future circular economy research for manufacturing for digital technologies is proposed.

This study presents a pre-processing approach adopted for the radar reflectivity data assimilation and results of simulations with the Harmonie numerical weather prediction model. The method shows an improvement of precipitation prediction within the radar location area in both the rain rates and spatial pattern presentation. With the assimilation of radar data, the model simulates larger water content in the middle troposphere within the layer from 1 to 6 km, with major variations at 2.5–3 km; it also reproduces better the mesoscale belt and cell patterns of precipitation fields.

The aim of this study has been to develop a novel two-level multi-objective genetic algorithm (GA) to optimize time series forecasting data for fans used in road tunnels by the Swedish Transport Administration (Trafikverket). Level 1 is for the process of forecasting time series cost data, while level 2 evaluates the forecasting. Level 1 implements either a multi-objective GA based on the ARIMA model or a multi-objective GA based on the dynamic regression model. Level 2 utilises a multi-objective GA based on different forecasting error rates to identify a proper forecasting. Our method is compared with using the ARIMA model only. The results show the drawbacks of time series forecasting using only the ARIMA model. In addition, the results of the two-level model show the drawbacks of forecasting using a multi-objective GA based on the dynamic regression model. A multi-objective GA based on the ARIMA model produces better forecasting results. In level 2, five forecasting accuracy functions help in selecting the best forecasting. Selecting a proper methodology for forecasting is based on the averages of the forecasted data, the historical data, the actual data and the polynomial trends. The forecasted data can be used for life cycle cost (LCC) analysis.

This paper proposes a new non-radial biennial Luenberger energy and environmental performance index (EEPI) to measure the EEP change in various Chinese cities. The sources of EEP change, in terms of technical efficiency change and technological change, are examined by Luenberger EEPI. The contributions from specific undesirable outputs and energy inputs to the EEP change are identified by means of the non-radial efficiency measure. The proposed approach is applied to evaluate the EEP of the industrial sector in 283 cities in China over 2010-2014. Factors influencing the emission abatement potential are investigated by employing geographically weighted regression (GWR) model. We find that 1) changes in EEP can be attributed to technological progress but that technological progress slows down across the study period; 2) the soot emission performance experiences a downtrend among four specific sub-performances in line with the truth that severe haze happened frequently in China; 3) the best performers begin to move from the coastal to inland cities with the less resource consumption and higher ecological equality; 4) cities with the strongest positive effect in regards to pollution intensity on emission abatement potential are located in the areas around the Bohai Gulf, where air pollution is particularly severe.

The Combined Elevation Test (CET) is a musculoskeletal screening technique (MST) replicates the streamline position in swimming and is commonly used in various sports. Although the CET is widely used, no normative data exist within an adolescent population. Therefore, the purpose of this study was to develop a normative data set for the CET within an adolescent population and to evaluate the influence various demographic and anthropometric variables. Data was collected for 416 participants aged between 8 and 18 years old. Age and arm span showed a significant correlation with CET scores (arm span r_s (105) = .478, p = .000, age r_s (416) = .238 p = .000). Regression analysis further quantified the influence of arm span and age on CET scores accounting for 23.1% and 5.3% of variability respectively. These results can be used as a reference point for clinicians and coaches who are using the CET within their assessment.

Data generation using high throughput technologies has led to the accumulation of diverse types of molecular data.These data have different types (discrete,real,string etc.) and occur in various formats and sizes. Datasets including gene expression, miRNA expression, protein-DNA binding data (ChIP-Seq/ChIP-ChIP), mutation data(copy number variation, single nucleotide polymorphisms), GO annotations, protein-protein interaction and disease-gene association data are some of the commonly used genomic datasets to study biological processes. Each of them provides a unique, complementary and partly independent view of the genome and hence embed essential information about their regulatory mechanisms. In order to understand the functions of genes, proteins and analyze mechanisms arising out of their interactions, information provided by each of these datasets individually may not be sufficient. Therefore integrating these multi-omic data and inferring regulatory interactions from the integrated dataset provides a system level biological insights in predicting gene functions and their phenotypic outcomes. To study genome functionality through interaction networks, different methods have been proposed for collective mining of information from an integrated dataset. We survey here data integration approaches using state-of-the-art techniques such as network integration, Bayesian networks, regularized regression (LASSO) and multiple kernel learning methods.

Crowdsourced Data (CSD) generated by citizens is becoming more popular as its potential utilisation in many applications is increasing due to its currency and availability. However, the quality of CSD, including its relevance, is often questioned as the data is not generated by professionals nor follows standard data collection procedures. The quality of CSD can be assessed according to a range of attributes including its relevance. Information relevance has been explored through using in Geographic Information Retrieval (GIR) techniques to identify relevant information. This research tested a relevance assessment approach for CSD by adapting relevance assessment techniques available in the GIR domain. The thematic and geographic relevance were assessed using the Term Frequency-Inverse Document Frequency (TF-IDF), Vector Space Model (VSM) and Natural Language Processing (NLP) techniques. The thematic and geographic specificities of the queries were calculated as 0.44 and 0.67 respectively, which indicates the queries used were more geographically specific than thematically specific. The Spearman's rho value of 0.62 indicated that the final ranked relevance lists showed reasonable agreement with a manually classified list and confirmed the potential of the approach for CSD relevance assessment for other possible crowdsourced data analysis.

Laser scanning systems make use of Light Detection and Ranging (LiDAR) technology to acquire accurately georeferenced sets of dense 3D point cloud data. The information acquired using these systems produces better knowledge about the terrain objects which are inherently 3D in nature. The LiDAR data acquired from mobile, airborne or terrestrial platforms provides several benefit over conventional sources of data acquisition in terms of accuracy, resolution and attributes. However, the large volume and scale of LiDAR data have inhibited the development of automated feature extraction algorithms due to the extensive computational cost involved in it. Moreover, the heterogeneously distributed point cloud, which represents objects with varying size, point density, holes and complicated structures pose a great challenge for data processing. Currently, geospatial database systems do not provide a robust solution for efficient storage and accessibility of raw data in a way that data processing could be applied based on optimal spatial extent. In this paper, we present Global LiDAR and Imagery Mobile Processing Spatial Environment (GLIMPSE) system that provides a framework for storage, management and integration of 3D LiDAR data acquired from multiple platforms. The system facilitates an efficient accessibility to the raw dataset, which is hierarchically represented in a geographically meaningful way. We utilise the GLIMPSE system to automatically extract road median from Airborne Laser Scanning (ALS) point cloud. In the first part of this paper, we detail an approach to efficiently retrieve the point cloud data from the GLIMPSE system for a particular geographic area based on user requirements. In the second part, we present an algorithm to automatically extract road median from the retrieved LiDAR data. The developed road median extraction algorithm utilises the LiDAR elevation and intensity attributes to distinguish the median from the road surface. We successfully tested our algorithms on two road sections consisting of distinct road median types based on concrete and grass-hedge barriers. The use of GLIMPSE improved the efficiency of the road median extraction in terms of fast accessibility to ALS point cloud data for the required road sections. The developed system and its associated algorithms provide a comprehensive solution to the user's requirement for an efficient storage, integration, retrieval and processing of large volumes of LiDAR point cloud data. These findings and knowledge contribute to a more rapid, cost-effective and comprehensive approach to surveying road networks.

An analysis of workplace accidents in the mining sector has been done using the database from the Spanish administration between the period 2005-2015 and applying data mining techniques. Data has been processed by means of the software Weka. Two scenarios were chosen regarding the accidents database, surface and underground mining. The most important variables involved in occupation accidents and their association rules have been determined. These rules are formed by several predictor variables that cause an accident, defining its characteristics and context. This study exposes the 20 most important association rules of the sector, either surface or underground mining, based on statistical confidence levels of each rule obtained by Weka. The outcomes display the most typical immediate causes with the percentage of accident basis of each association rule. The most typical immediate cause is body movement with physical effort or overexertion and type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident change in both scenarios. Data mining techniques have been proved as a very powerful tool to find out the root of the accidents, apply corrective measures and verify their effectiveness, either for public or private companies.

Wikipedia is the most popular and the largest user-generated source of knowledge on the Web. Quality of the information in this encyclopedia is often questioned. Therefore, Wikipedians have developed an award system for high quality articles, which follows the specific style guidelines. Nevertheless, more than 1.2 million articles in Polish Wikipedia are unassessed. This paper considers over 100 linguistic features to determine the quality of Wikipedia articles in Polish language. We evaluate our models on 500,000 articles of Polish Wikipedia. Additionally, we discuss the importance of linguistic features for quality prediction.

There is increasing evidence that the impact of climate change on the productivity of grasslands will at least partly depend on their biodiversity. A high level of biodiversity may confer stability to grassland ecosystems against environmental change, but there are also direct effects of biodiversity on the quantity and quality of grassland productivity. To explain the manifold interactions, and to predict future climatic responses, models may be used. However, models designed for studying the interaction between biodiversity and productivity tend to be structurally different from models for studying the effects of climatic impacts. Here we review the literature on the impacts of climate change on biodiversity and productivity of grasslands. We first discuss the availability of data for model development. Then we analyse strengths and weaknesses of three types of model: ecological, process-based and integrated. We discuss the merits of this model diversity and the scope for merging different model types.

Energy storage systems (ESS) are penetrating into various sections of power system through different applications. ESS can be used either as a buffer for intermittent renewable energy sources or as a stand-alone distributed storage for load shifting. ESS use different types of storage devices such as lead-acid batteries, lithium ion batteries, flow batteries, and super-capacitors. Hybrid ESS consisting of few types of storage devices are also common in practice. Determining the load demand of such ESSs at various instances (charging profile) accurately is indispensable in most of the cases. Capacity loss is common phenomenon that occurs in all types of storage devices because of ageing. Capacity loss has to be accounted while determining the charging profile of storage devices for better accuracy. Data-driven modeling is an attractive approach for determining the load demand of ESS due to the availability of valuable data from smart grid technologies. In this paper, the application of different types of data-driven models to predict the current charging profile of the ESS based on previous charging profiles is examined. The proposed method can leverage on the existing data from smart grid and is a black box modeling approach.

Project portfolio configuration (PPC) is an important approach to maintain the sustainable development of enterprises and achieve organizations’ strategy. However, the synergetic efficacy of PPC which determines the degree of the project's strategic objectives achieved is a fuzzy problem and hard to be measured. To solve this problem, this paper takes the data envelopment analysis (DEA) as the tool to measure the efficacy of PPC under deterministic conditions. First, a portfolio evaluation index system which takes financial indicators and non-financial indicators into consideration is developed based on the review of the literature; Second, an evaluation model based on DEA is built to reduce the number of decision making-unit with the perspective of synergetic theory; Then, a computational experiment is studied to verify the feasibility of this proposed model. The results of this computational experiment show that this model can effectively narrow scope of decision-making, improve the decision-making level and provide a reference to decide the DEA effective project portfolio decision-making unit. To our knowledge, this study is the first time to apply the notion of synergetic efficacy and DEA to the PPC domain. It is hoped that this paper may shed lights on any further study about PPC and enterprise competitiveness of sustainable development.

Traffic congestion is one of the foremost problems confronted by the urban and suburban tenants of today. Traffic congestion increases vehicle emissions and degrades air quality. Urban planners and policy makers have consequently been always investigating choices to alleviate traffic congestion and to enhance air quality. Teleworking is one option that has received significant consideration and has been studied in the recent past. The aim of the study is to explore the relationship between teleworking, air quality and traffic in Switzerland. The analysis relies on panel individual and household level data over the period 2002-2013. We examine five main air pollutants; the sulphur dioxide (SO₂), the ground-level ozone (O₃) the nitrogen dioxide (NO₂), the carbon monoxide (CO) and the particulate matter less than 10 microns (PM₁₀). Based on the fixed effects estimates, teleworking reduces traffic volume by 1.9 per cent. Furthermore, the reduction observed on air pollution is higher for NO₂, CO and PM₁₀ ranging between 3.3-3.7 per cent, followed by O₃ at 2.3 per cent and SO₂ at 2.1 per cent. According to instrumental variable (IV) approach and the two stage least squares (2SLS) method, the effect is higher ranging between 2.6-4.1 per cent. The respective reduction on traffic becomes 2.7 per cent. Overall, the main concluding remark of the study is that teleworking can be a promising tool for urban planning and development, focusing at the traffic volume reduction, and the air quality improvement. Additional policy implications of teleworking and its beneficial effects for the society are further discussed.

We propose an approach for estimating the error in depth data provided by generic 3D sensors, which are modern devices capable of generating an image (RGB data) and a depth map (distance) or other similar 2.5D structure (e.g. stereo disparity) of the scene. Our approach starts capturing images of a checkerboard pattern devised for the method. Then proceed with the construction of a dense depth map using functions that generally comes with the device SDK (based on disparity or depth). The 2D processing of RGB data is performed next to find the checkerboard corners. Clouds of corner points are finally created (in 3D), over which an RMS error estimation is computed. We come up with a multi-platform system and its verification and evaluation has been done, using the development kit of the board nVIDIA Jetson TK1 with the MS Kinects v1/v2 and the Stereolabs ZED camera. So the main contribution is the error determination procedure that does not need any data set or benchmark, thus relying only on data acquired on-the-fly. With a simple checkerboard, our approach is able to determine the error for any device. Envisioned application is on 3D reconstruction for robotic vision, with a series of 3D vision sensors embarked in robots (UAV of type quadcopter and terrestrial robots) for high-precision map construction, which can be used for sensing and monitoring.

This paper address the development of a new technic in the sleep analysis domain. Sleep is defined as a periodic physiological state during which vigilance is suspended and reactivity to external stimulations diminished. We sleep on average between six and nine hours per night and our sleep is composed of four to six cycles of about 90-minutes each. Each of these cycles is composed of a succession of several stages of sleep, more or less deep. The analysis of sleep is usually done using a polysomnography. This examination consists of recording, among other things, electrical cerebral activity by electroencephalography (EEG), ocular movements by electrooculography (EOG) and chin muscle tone by electromyography (EMG). The recording is done mostly in a hospital, more specifically in a service for monitoring the pathologies related to sleep. The readings are then interpreted manually by an expert to generate a hypnogram, a curve showing the succession of sleep stages during the night in 30-second epochs. The proposed method is based on the follow-up of the thermal signature that makes it possible to classify the activity into three classes: "awakening", "calm sleep" and "agitated sleep". The contribution of this non-invasive method is part of the screening of sleep disorders, to be validated by a more complete analysis of the sleep. The measure provided by this new system, based on temperature monitoring (patient and ambient), aims to be integrated into the tele-medicine platform developed within the framework of the Smart-EEG project by the SYEL - SYstèmes ELectroniques team. Analysis of the data collected during the first surveys carried out with this method showed a correlation between thermal signature and activity during sleep. The advantage of this method lies in its simplicity and the possibility of carrying out measurements of activity during sleep and without direct contact with the patient at home or hospitals.

With the rapid spread of built-in GPS handheld smart devices, the trajectory data from GPS sensors has grown explosively. Trajectory data has spatio-temporal characteristics and rich information. Using trajectory data processing techniques can mine the patterns of human activities and the moving patterns of vehicles in the intelligent transportation systems. A trajectory similarity measure is one of the most important issues in trajectory data mining (clustering, classification, frequent pattern mining, etc.). Unfortunately, the main similarity measure algorithms with the trajectory data have been found to be inaccurate, highly sensitive of sampling methods, and have low robustness for the noise data. To solve the above problems, three distances and their corresponding computation methods are proposed in this paper. The point-segment distance can decrease the sensitivity of the point sampling methods. The prediction distance optimizes the temporal distance with the features of trajectory data. The segment-segment distance introduces the trajectory shape factor into the similarity measurement to improve the accuracy. The three kinds of distance are integrated with the traditional dynamic time warping algorithm (DTW) algorithm to propose a new segment–based dynamic time warping algorithm (SDTW). The experimental results show that the SDTW algorithm can exhibit about 57%, 86%, and 31% better accuracy than the longest common subsequence algorithm (LCSS), and edit distance on real sequence algorithm (EDR) , and DTW, respectively, and that the sensitivity to the noise data is lower than that those algorithms.

Capital structure decision plays an imperative role in firm’s performance. Recognizing the importance, there has been many studies inspected the rapport of capital structure with performance of firms and findings of those studies are inconclusive. In addition, there is relative deficiency of empirical studies examining the link of capital structure with performance of banks in Bangladesh. This paper attempted to fill this gap. Using panel data of 22 banks for the period of 2005-2014, this study empirically examined the impacts of capital structure on the performance of Bangladeshi banks assessed by return on equity, return on assets and earnings per share. Results from pooled ordinary least square analysis show that there are inverse impacts of capital structure on bank’s performance. Empirical findings of this study is of greater significance for the developing countries like Bangladesh because it will call upon concentration of the bank management and policy makers to pursue such policies to reduce reliance on debt and to accomplish optimal level capital structure. This research also contributes to empirical literatures by reconfirming (or otherwise) findings of previous studies.

In order to correct attenuated millimeter-wavelength (Ka-band) radar data and address the problem of instability, an attenuation correction methodology (attenuation correction with variation trend constraint; VTC) was developed. Using synchronous observation conditions and multi-band radars, the VTC method adopts the variation trends of reflectivity in X-band radar data captured with wavelet transform as a constraint to adjust reflectivity factors of millimeter-wavelength radar. The correction was evaluated by comparing reflectivities obtained by millimeter-wavelength cloud radar and X-band weather radar. Experiments showed that attenuation was a major contributory factor in the different reflectivities of the two radars when relatively intense echoes exist, and the attenuation correction developed in this study significantly improved data quality for millimeter-wavelength radar. Reflectivity differences between the two radars were reduced and reflectivity correlations were enhanced. Errors caused by attenuation were eliminated, while variation details in the reflectivity factors were retained. The VTC method is superior to the bin-by-bin method in terms of correction amplitude and can be used for attenuation correction of shorter wavelength radar assisted by longer wavelength radar data.

With the advances in industry and commerce, passengers have become more accepting of environmental sustainability issues; thus, more people now choose to travel by bus. Government administration constitutes an important part of bus transportation services as the government gives the right-of-way to transportation companies allowing them to provide services. When these services are of poor quality, passengers may lodge complaints. The increase in consumer awareness and developments in wireless communication technologies have made it possible for passengers to easily and immediately submit complaints about transportation companies to government institutions, which has brought drastic changes to the supply-demand chain comprised of the public sector, transportation companies, and passengers. This study proposed the use of big data analysis technology including systematized case assignment and data visualization to improve management processes in the public sector and optimize customer complaint services. Taichung City, Taiwan was selected as the research area. There, the customer complaint management process in public sector was improved, effectively solving such issues as station-skipping, allowing the public sector to fully grasp the service level of transportation companies, improving the sustainability of bus operations, and supporting the sustainable development of the public sector-transportation company-passenger supply chain.

Adlay seed samples were collected from 3 adlay growing regions (Yeoncheon, Jeonnam and Eumseong regions) in Korea during 2012. Among all the samples collected, 400 seeds were tested for fungal occurrence by standard blotter and test tube agar methods and different taxonomic groups of fungal genera were detected. The most predominant fungal genera encountered were Fusarium, Phoma, Alternaria, Cladosporium, Curvularia, Cochliobolus and Leptosphaerulina. The occurrence of Fusarium species were 45.6% and based on the combined sequences of two protein coding genes, EF-1a, Beta-tubulin and phylogenetic analysis, 10 species were characterized as F. incarnatum (11.67%), F. kyushense (10.33%), F. fujikuroi (8.67%), F. concentricum (6.00%), F. asiaticum (5.67%), F. graminearum (1.67%), F. miscanthi (0.67%), F. polyphialidiom (0.33%), F. armeniacum (0.33%) and F. thapsinum (0.33%). The ability of these isolates to produce mycotoxins fumonisin (FUM) and zeralenone (ZEN) were tested by ELISA quantitative analysis method. The result revealed that fumonisin (FUM) was produced only by F. fujikuroi and zeralenone (ZEN) by F. asiaticum & F. graminearum. Mycotoxigenic species were then examined for their morphological characteristics to confirm their identity. Morphological observations of the species correlated well with their molecular identification and confirmed as F. asiaticum, F. fujikuroi and F. graminearum.

Suicide dynamics form a complex system deeply influenced by interrelated factors, necessitating advanced methodologies for comprehensive analysis. This study pioneers the application of Particle Markov Chain Monte Carlo (PMCMC) methods in suicide research, recognized for their enhanced sampling efficiency over traditional techniques in complex, high-dimensional models. PMCMC is particularly adept at handling non-Gaussian distributions and navigating parameter spaces efficiently, preventing the entrapment in local optima. Utilizing PMCMC, our research simulated a broad spectrum of potential outcomes, clarifying the probable scenarios and their likelihoods, thus enriching the predictive accuracy and understanding of suicide dynamics. These methods facilitated the exploration of dynamic interactions among key risk factors such as mental health issues, trauma, substance use, social isolation, and access to harmful means, whose complex interplays challenge predictive modeling. The study extends previous applications of PMCMC in complex systems like H1N1, opioid crises, and COVID-19 to the domain of suicide, suggesting its potential in enhancing decision-making and intervention strategies. However, limitations due to the model's simplified assumptions and the specificity of the data to certain populations underscore the necessity for broader application to validate findings across varied demographics. In summary, while PMCMC offers robust capabilities for the dynamic modeling of suicide, it requires careful parameter selection and consideration of computational demands. Future research should continue to leverage this approach in more complex settings, enhancing our ability to predict and mitigate suicide risks effectively.

In this paper, a low-power Injection-Locked Clock and Data Recovery (ILCDR) using 28nm FDSOI technology is presented. The back-gate auto-biasing of UTBB-FDSOI transistors allows us to create a QRO (Quadrature Ring Oscillator) reducing both size and power consumption. By injecting a digital signal into this circuit, we realize an Injection-Locked Oscillator (ILO) with low jitter. Thanks to the good performance of this oscillator, we propose a low power ILCDR with fast locking time and low jitter for burst-mode applications. The main novelty consists in the implementation of a complementary QRO based on back-gate control using FDSOI technology to realize a simple and efficient ILCDR circuit. With a Pseudo-Random Binary Sequence (PRBS7) at 868Mbps, the recovered clock jitter is 26.7ps (2.3%UIp-p) and the recovered data jitter is 11.9ps (1%UIp-p). With a 0.6V power supply, the power consumption is 318μW. The estimated Chip area is around 6600μm².

In recent decades, the Variational AutoEncoder (VAE) model has shown good potential and capabilities in image generation and dimensionality reduction. The combination of VAE and various machine learning frameworks has also worked effectively in different daily life applications, however its possibility and effectiveness in modern game design has seldom been explored nor assessed. The use of its feature extractor for data clustering was minimally discussed in literature neither. This paper first attempts to explore different mathematical properties of the VAE model, in particular, the theoretical framework of the encoding and decoding processes, the possible achievable lower bound and loss functions of different applications; then applies the established VAE model into generating new game levels within two well-known game settings; as well as validating the effectiveness of its data clustering mechanism with the aid of the Modified National Institute of Standards and Technology (MNIST) database. Respective statistical metrics and assessments were also utilized for evaluating the performance of the proposed VAE model in aforementioned case studies. Based on the statistical and spatial results, several potential drawbacks and future enhancement of the established model were outlined, with the aim of maximizing the strengths and advantages of VAE for future game design tasks and relevant industrial missions.

Variational Auto-Encoders (VAEs) are deep generative models used for unsupervised learning, however their standard version is not topology-aware in practice since the data topology may not be taken into consideration. In this paper, we propose two different approaches with the aim to preserve the topological structure between the input space and the latent representation of a VAE. Firstly, we introduce InvMap-VAE as a way to turn any dimensionality reduction technique, given an embedding it produces, into a generative model within a VAE framework providing an inverse mapping into original space. Secondly, we propose the Witness Simplicial VAE as an extension of the Simplicial Auto-Encoder to the variational setup using a witness complex for computing the simplicial regularization, and we motivate this method theoretically using tools from algebraic topology. The Witness Simplicial VAE is independent of any dimensionality reduction technique and together with its extension, Isolandmarks Witness Simplicial VAE, preserves the persistent Betti numbers of a data set better than a standard VAE.

For analysis tasks, time counts are of interest — values recorded at some, usually equidistant, points in time. The calculation can be performed at various intervals: after a minute, an hour, a day, a week, a month, or a year, depending on how much detail the process should be analyzed. In time series analysis problems, we deal with discrete-time, when each observation of a parameter forms a time frame. The same can be said about the behavior of Covid-19 over time.In this paper, we solve the problem of predicting Covid-19 diseases in the world using neural networks. This approach is useful when it is necessary to overcome difficulties related to non-stationarity, incompleteness, unknown distribution of data, or when statistical methods are not completely satisfactory. The problem of forecasting is solved with the help of the analytical platform Deductor Studio, developed by specialists of the company Intersoft Lab of the Russian Federation. When solving this problem, appropriate methods were used to clean the data from noise and anomalies, which ensured the quality of building a predictive model and obtaining forecast values for tens of days ahead. The principle of time series forecasting was also demonstrated: import, seasonal detection, cleaning, smoothing, building a predictive model, and predicting Covid-19 diseases in the world using neural technologies for 30 days ahead.

The sPHENIX experiment is a state-of-the-art jet and heavy flavor physics detector which successfully recorded its first Au + Au collision data at 200 GeV at RHIC. sPHENIX will provide heavy flavor physics measurements covering an unexplored kinematic region and unprecedented precision at RHIC to probe the parton energy loss mechanism, parton transport coefficients in quark-gluon plasma, and the hadronization process under various medium conditions. At the center of sPHENIX, the Monolithic-Active-Pixel-Sensor (MAPS) based VerTeX detector (MVTX) is a high-precision silicon pixel detector. The MVTX provides excellent position resolution and the capability of operating in continuous streaming readout mode, allowing precise vertex determination and recording a large data sample, both of which are particularly crucial for heavy flavor physics measurements. In this work, we will show the general performance of heavy-flavor hadron reconstruction. In addition, we will discuss the commissioning experience with sPHENIX. Finally, we will provide the projection of b-hadron and jet observables and discuss the estimated constraints on theoretical models.

Autonomous aircraft are the key enablers of future urban services, such as postal and transportation systems. Digital Twins (DT) are promising cutting-edge technologies that can transform the future transport ecosystem into an autonomous and resilient system. However, since DT is a data-driven solution based on AI, proper data management is essential in implementing DT as a Service (DTaaS). One of the challenges in DT development is the availability of real-life data, particularly for training algorithms and verifying the functionality of DT. The current article focuses on data augmentation through synthetic data generation. This approach can facilitate the development of DT in case the developers do not have enough data to train the Machine Learning (ML) algorithm. The current twinning approach provides a prospective ideal state of the engine used for proactive monitoring of the engine’s health as an anomaly detection service. In line with the track of Unmanned Aircraft Vehicles (UAV) for Urban Air Mobility in Smart Cities applications, this paper focuses specifically on the common Hybrid turbo-shaft in drones/helicopters. However, there is a significant gap in real-life similar synthetic data generation in the UAV domain literature. Therefore, Rolling Linear Regression and Kalman Filter algorithms were implemented on noise-added data, which simulate the data measured from the engine in a real-life operational lifecycle. For both thermal and hybrid models, the corresponding DT model has shown high efficiency in noise filtration and a certain amount of predictions with a lower error rate on all engine parameters, except the engine torque.

The diverse, heterogeneous, and dynamic nature of urban data poses challenges for semantic integration and knowledge sharing in smart city applications. Traditional urban governance sectors often develop domain-specific data standards, which are insufficient for integrating and applying multi-source heterogeneous data. This article proposes the Smart City Ontology Framework (SMOF), leveraging ontology technology for semantic-level data sharing and interoperability across different industries. SMOF adopts a top-down integration strategy, harmonizing diverse data standards from IoT, BIM, and GIS into a cohesive structure. This research delineates the foundational components of SMOF, encompassing entities, relationships, properties, events, and rules, and outlines the methodology and principles underpinning its construction. We further develop a scalable, hierarchical classification system for entities, properties and relationships, adaptable for specific semantic applications. Through a fire emergency scenario, we exemplify SMOF's practical utility in knowledge representation and data mapping, highlighting its capacity for semantic querying within complex urban data ecosystems. Our findings indicate SMOF's significant role in fostering integrated urban data management, thereby enhancing data interoperability and applicability in diverse urban governance contexts.

Background: Conventional audiometry assesses hearing in the frequency range of 250–8,000 Hz, while humans can detect sounds from 20–20,000 Hz. Hearing sensitivity above 8,000 Hz can be assessed through “Extended high-frequency audiometry (EHFA)”, which is useful for early detection and monitoring of hearing loss and counseling for tinnitus patients. Despite its usefulness, age significantly affects hearing sensitivity. Currently, there are no standard hearing thresholds in the EHF range categorized by age groups in Thailand. This study aimed to determine normative EHFA data across different age groups in a healthy Thai population. Methods: The study included 134 participants aged 18–70 years, categorized into five age groups. All participants had normal hearing thresholds and type A tympanograms bilaterally. Following this, EHFA measurement was performed. Results: Across all age groups, there was an observed increase in median hearing thresholds as age increased. In comparison, no significant difference in median hearing thresholds was found between individuals aged 18–30 and >30–40 years. However, those over 40 years had significantly higher median thresholds across all frequencies compared to those under 40 years (p40–70 years. Median hearing thresholds for those aged 18–40 was ≤20 dB HL across most frequencies, except at 16,000 Hz (30 dB HL). In the >40–70 age group, thresholds ranged from 20 dB HL at 9,000 Hz to 70 dB HL at 14,000 and 16,000 Hz. However, no significant differences were found in hearing thresholds between sexes and ear sides. Conclusions: This study establishes normative EHFA data for healthy Thai adults, appropriately divided into two groups (18-40 and >40-70 years) for clinical use. Further studies are needed to assess EHFA thresholds in populations with hearing loss-related risk factors.

The study investigates using a recommender system to improve the accuracy of depth of defect (DoD) estimation in immersive steel samples. The proposed method can enhance prediction performance and be applied across various industries like water, oil, and gas. The recommender system is trained on experimental data from an immersive wedge sample and then evaluated on test data from a different sample to demonstrate its potential for precise and non-invasive DoD detection.

This study discussion point of this paper is to make an in-depth analysis of the development impact of the Internet of Things combined with edge computing and artificial intelligence. In the analysis process, the importance and criticality of data processing and decision making of edge computing as well as the challenges faced should be elaborated respectively. With the rapid popularization and development of Internet of Things devices, edge computing has brought more innovative solutions for different application scenarios such as intelligent furniture industrialization, automatic driving and intelligent transportation by reducing the delay of processing data and improving the characteristics of security data, film and television. Resource and energy efficiency have certain limitations, so it is necessary to combine artificial intelligence to enhance edge computing devices, hardware accelerators, and its utility and federated learning technologies, which can effectively improve the performance and scalability of edge computing and promote the development of more self-service network systems for smart devices. The core of this study is how to promote the Internet through AI-driven edge computing to further develop and provide insights for research priorities and suggest related future research directions.

This paper focuses on CEOs, who are considered the strategic leaders of corporations because of their crucial role in making important decisions. This research paper examines how female CEOs influence green innovation (GI) in Asian industrial sector. Its main objective is to answer the following research questions: Are there differences in GI endeavors between Asian industrial firms with female CEOs and those with male CEOs? Does the size of the industrial firms have a positive moderating effect on the relationship between CEO gender and GI? Based on our research questions, the size of firms is likely a determining factor in the GI of female CEOs. This research employs rigorous econometric modeling to analyze a substantial dataset of Asian industrial listed companies spanning from 2013 to 2022. It has been proven that industrial firms led by females CEOs are more inclined to have environmentally friendly practices. Furthermore, the size of the industrial firms amplifies the beneficial influence of female CEOs on the firm's chances of engaging in GI initiatives. Our outcomes stay robust to endogeneity issues using two-step GMM estimators. This study proposes that stakeholders, particularly in Asian countries, should promote the increased representation of females in CEO roles, particularly within large corporations. This is because women-led companies demonstrate superior performance in GI endeavors. Thus, regulators need to implement policies that promote the inclusion of women in CEO positions within large-scale enterprises. These policies may potentially strengthen the private sector’s capacity to foster sustainable innovation.

The recent growth of wearable medical device technology in the form of fitness trackers, smart watches, smartphone apps, and patient monitoring systems has created people-generated health data (PGHD) that may benefit medical science with large amounts of continuous real-world data. The prevalence of these devices speaks to their broad popularity and user-friendliness and may lead us one day to a more fully “connected healthcare system.” Meanwhile, data security, confidentiality, and privacy issues have emerged in these hackable systems. Despite the promise of anonymized data, data can sometimes be re-identified, but even without that step, data breaches may reveal information (name, address, date of birth, social security number, and so on) sufficient for identity theft. Clinicians are often asked about the utility and value of wearable devices or monitors, but most are unaware that data from these systems may be transmitted, stored, and even sold without the user’s specific knowledge. Despite the confidentiality of medical information, cybersecurity surrounding wearables and monitors remains relatively lax, making them comparatively easy targets for cyber-villains. It is also important that efforts be taken to make PGHD more secure, since medical data may have great value to telehealth applications and AI-physician assistants. Clinicians should take an active role in informing patients about both risks and benefits of wearables and similar devices.

This study introduces the Data-Driven Personalized Learning Model (DDPLM), a sophisticated framework designed to enhance foreign language acquisition through the integration of big data analytics. Implemented within the educational platforms Edmodo and Duolingo, DDPLM utilizes real-time data processing to tailor learning paths and content dynamically to individual learner needs. Our findings indicate significant improvements in language learning efficiency, engagement, and retention. The model's adaptability across different digital environments showcases its potential scalability and effectiveness in various educational contexts. Additionally, the research addresses the critical role of personalized feedback and adaptive challenges in maintaining learner motivation and promoting deeper linguistic comprehension. The outcomes suggest that DDPLM significantly transforms traditional language education, making it more personalized, efficient, and aligned with individual learning preferences.

This study presents an advanced data augmentation framework to enhance diagnostics in centrifugal pumps using vibration data, with a focus on practical industrial applications. Initially, Gaussian noise and signal stretching were employed to generate synthetic data, addressing the common issue of insufficient defect data in industrial settings. These methods simulate varied operating conditions and different rotating speeds. Recognizing the limitations of traditional approaches, we further integrated advanced models—Long Short-Term Memory (LSTM), Autoencoder (AE), and Generative Adversarial Networks (GANs) to augment the dataset comprehensively. This enhanced approach increases the robustness and accuracy of machine-learning models for fault detection and classification. Experimental results show significant improvements in diagnostic algorithm performance, reducing false positives and increasing fault detection rates. The study offers a complete framework for incorporating both traditional and advanced data augmentation techniques into predictive maintenance protocols, ensuring reliable operation of centrifugal pumps in diverse industrial environments.

Machine learning methods used for classification can face challenges due to class imbalance, where a certain class is underrepresented. Over/under-sampling of minority/majority class observations, or model selection for ensemble methods alone, may not be effective if the class imbalance ratio is very high. To address this issue, this paper proposes a method called enhance tree ensemble (ETE) based on generating synthetic data for minority class observations in conjunction with tree selection based on their performance on the training data. The proposed method first generates minority class instances to balance the training data and then uses the idea of tree selection by leveraging out-of-bag (〖ETE〗_OOB) and sub-samples (〖ETE〗_SS) observations, respectively. The efficacy of the proposed method is assessed using twenty benchmark problems for binary classification with moderate to extreme class imbalance, comparing it against other well-known methods such as optimal tree ensemble (OTE), SMOTE random forest (〖RF〗_SMOTE), over-sampling random forest (〖RF〗_OS), under-sampling random forest (〖RF〗_US), k-nearest-neighbor (k-NN), support vector machine (SVM), tree, and artificial neural network (ANN). Performance metrics such as classification error rate and precision are used for evaluation purposes. The analyses of the study revealed that the proposed method, based on data balancing and model selection, yielded better results than the other methods.

In the realm of Lithium-ion batteries, issues like material aging and capacity decline contribute to performance degradation or potential safety hazards. Predicting Remaining Useful Life (RUL) serves as a crucial method to assess the health of batteries, thereby enhancing reliability and safety. Currently hybrid approaches for batteries RUL estimation are prevalence and gained fruitful development. In this paper, a hybrid voting ensembles combining Gradient Boosting, Random Forest and K-Nearest Neighbors is proposed to predict the capacity fade trend and knee point. Finally, extensive experiments are conducted using CALCE CS2 datasets. According to the experimental results, the proposed approach supersedes the single deep learning approach for RUL prediction and the knee point is predicted accurately. Besides prediction purpose, this innovated approach can be also proposed to be integrated into the real-world application for wider usage.

Well-annotated gene and genomic sequences serve as a foundation for making inferences in molecular biology and evolution, and can directly impact public health. The first SARS-CoV-2 genome was submitted to GenBank and used to develop the two successful vaccines. Conserved protein domains are often chosen as targets for developing antiviral medicines or vaccines. Mutation and substitution patterns provide crucial information not only on functional motifs and genome/protein interactions but also for characterizing phylogenetic relationships among viral strains. These patterns, together with the collection time of viral samples, serve as the basis for addressing the question of when and where the host-switching event occurred. Unfortunately, viral genomic sequences submitted to GenBank undergo little quality control, and critical information in the annotation is frequently changed without being recorded. Researchers often have no choice but to hold blind faith in the accuracy of the sequences. There have been reports of incorrect genome annotation but no report that casts doubt on the genomic sequences themselves because it seems theoretically impossible to identify genomic sequences that may not be authentic. This paper takes an innovative approach to show that some SARS-CoV-2 genomes submitted to GenBank cannot be possibly authentic. Specifically, some SARS-CoV-2 genomic sequences deposited in GenBank with collection time in 2023 and 2024, isolated from saliva, nasopharyngeal, sewage, and stool are identical to the reference genome of SARS-CoV-2 (NC_045512). The probability for such occurrence is effectively 0. I also compile SARS-CoV-2 genomes with changed sample collection time. One may led astray in bioinformatic analysis without being aware of errors in sequences and sequence annotation.

This study analyzes the scholarly landscape of data literacy through citation and co-citation analyses of documents, sources, and authors. Using Scopus data and VOSviewer, the study identifies significant contributions and thematic trends. A minimum criterion of 10 citations per document was applied, filtering the dataset to 205 documents, with a focus on 81 interlinked documents. Citation analysis covered document, source, and author metrics, while co-citation analysis examined cited authors, sources, and references. The study found 997 documents on data literacy, narrowed down to 205 significant ones, with 81 interlinked documents showing a high average citation rate. Key sources included the ACM International Conference Proceeding Series and Teachers College Record, and prominent authors like Ellen B. Mandinach and Kim Schildkamp emerged as central figures. Data literacy research spans fields like education, sociology, and information science, highlighting its interdisciplinary nature. The study's focus on citation metrics may introduce selection bias, emphasizing widely cited works. Future research could explore less-cited but influential works and broader datasets to mitigate biases. Policymakers can use these insights to integrate data literacy into educational curricula and design targeted professional development programs. Promoting interdisciplinary collaboration and supporting open access to scholarly literature can enhance data literacy initiatives. This study provides a comprehensive citation and co-citation analysis of data literacy research, offering valuable insights into key contributions and thematic trends, informing policy and practice, and underscoring the importance of data literacy in contemporary education and society.

Researchers are dedicated to providing effective solutions for serious problems such as mental health. This field of study ranges from understanding the impact of mental health ailments on individuals to identifying trends in mental health diseases based on various data points. Unfortunately, the journey from diagnosis to receiving a proper mental health regimen is costly and inaccessible to many. This necessitates the introduction of an affordable alternative that enables individuals with internet access to connect to a platform to determine whether they require the services of a mental health professional. Additionally, such a platform can assist mental health professionals in quickly identifying patients with mental health conditions. Our proposed solution leverages hidden trends in data obtained from 700 mental health patients at The local mental hospital in Pakistan. We have used this data to train a machine learning classifier capable of distinguishing between Psychotic and Neurotic disorders. Psychotic disorders are a group of mental health conditions characterized by a loss of touch with reality whereas neurotic disorders are a group of mental health conditions characterized by excessive worry, anxiety, or stress that does not involve a loss of touch with reality. Our model achieved an overall accuracy score of 73%, indicating successful prediction of the correct diagnosis in 73 out of 100 pipeline tests. While these results may not seem significant, an increase in data points would surely allow for further improvements in these results and the overall solution we propose.

Mangroves are critical ecosystems providing essential environmental services, making their conservation crucial. High-resolution remote sensing, particularly through unmanned aerial vehicles (UAVs), offers unprecedented resolution in ecosystem mapping. This study utilizes a multispectral sensor mounted on a UAV to map mangroves at Cardoso Island on Brazil’s southeastern coast and Suape on the northeastern coast. Using Geographic Object-Based Image Analysis (GEOBIA) for segmentation and classification, we employed machine learning algorithms to classify the primary mangrove species: Laguncularia racemosa, Rhizophora mangle, and Avicennia schaueriana. Two flight altitudes were used: a higher altitude for broad-scale mapping and a lower altitude for classification training, supplemented by field measurements for calibration. This method enabled the precise delineation of tree crowns and provided insights into species distribution and zonation, influenced by the distinct estuarine conditions of tides and sediment input. The high-resolution mapping achieved in this study enhances detailed analyses of mangroves, improving ecological models and biophysical estimations such as biomass and blue carbon stocks. This work highlights the potential of UAV-based multispectral imaging in advancing mangrove research and conservation efforts.

In this work, we propose a generalized partially functional linear regression model with an interaction term between functional predictors. The estimators of the regression coefficient of scalar predictors and regression coefficient functions of functional predictors and their interactions are obtained. The asymptotic property of the estimators is established. Extensive simulation studies illustrate the asymptotic results. Finally, the proposed model was applied to investigate the influence of air qualities, climate factors, medical and social indicators and the interactions on cancer incidence which is a binary response.

Investigation of functional magnetic resonance imaging (fMRI) data with machine learning (ML) techniques, including also deep learning (DL) methods, have been widely used to study Autism Spectrum Disorder (ASD). This disorder is characterized by symptoms that affect the individual’s behavioral aspects and social relationships. Early diagnosis is crucial for intervention, but the complexity of ASD poses challenges for treatment development. This study compares traditional ML techniques with deep learning (DL) methods in the analysis of functional connectivity measures obtained from the time series of multicentric ABIDE dataset. Specifically, Support Vector Machines (SVM) classifiers, with both linear and Radial Basis Function (RBF) kernels, as well as eXtreme Gradient Boosting (XGBoost) classifiers, are compared against the TabNet classifier, which is a DL architecture customized for tabular data analysis and a Multi Layer Perceptron (MLP). The findings suggest that DL classifiers may not be optimal for the type of data analyzed, as their performance trails behind that of standard classifiers. SVMs achieve performances, in terms of AUC, around 75%, compared to the best TabNet and MLP results, which are 65% and 71%, respectively. Additionally, this work investigates the brain regions that contribute most to the classification task, which are found to be those primarily responsible for sensory and spatial perception, as well as attention modulation, known to be altered in ASD.

This study involves the development of a hybrid forecasting framework that integrates two different models in a framework to improve prediction capability. Although the concept of hybridization is not a new issue in forecasting, our approach presents a new structure that combines two standard simple forecasting models uniquely for superior performance. Hybridization is significant for complex data sets with multiple patterns. Such data sets do not respond well to simple models, and hybrid models based on the integration of various forecasting tools often lead to better forecasting performance. The proposed architecture includes serially connected ARIMA and ANN models. The original data set is first processed by ARIMA. The error (i.e., residuals) of the ARIMA is sent to the ANN for secondary processing. Between these two models, there is a classification mechanism where the raw output of the ARIMA is categorized into three groups before they are sent to the secondary model. The algorithm is tested on well-known forecasting cases from the literature. The proposed model performs better than existing methods in most cases.

Traumatic Brain Injury (TBI) is one of the leading causes of death and disability worldwide. Patient treatment and management pose a challenge for healthcare systems. The prognosis of these patients may be influenced by factors such as sex. This study aims to describe the clinical parameters of patients hospitalized in the Intensive Care Unit (ICU) of a Spanish hospital due to Trauma Brain Injury and to establish differences based on sex. Methodology: An observational, cross-sectional, and analytical study was conducted from March 2015 to December 2019. All patients admitted to the ICU during this period who presented isolated significant Traumatic Brain Injury, defined as an abbreviated injury scale (AIS) ≥ 3, were included. Data on baseline characteristics, mechanism of injury, substance use, and acute management in the prehospital and hospital stages (including the need for hospitalization) were recorded. A descriptive and in-ferential analysis was conducted using the chi-square test. Results: A total of 950 patients were ultimately included. The majority of the patients were men (723) with a mean age of 45.16 (± 17.55). There were statistically significant differences in terms of the mechanism of injury (p

Medical datasets may be imbalanced and contain errors due to subjective test results and clinical variability. The poor quality of original data affects classification accuracy and reliability. Hence, detecting abnormal samples in the dataset can help clinicians make better decisions. In this study, we propose an unsupervised error detection method using patterns discovered by the Pattern Discovery and Disentanglement (PDD) model, developed in our earlier work. Applied to the large data, the eICU Collaborative Research Database for sepsis risk assessment, the proposed algorithm can effectively discover statistically significant association patterns, generate an interpretable knowledge base for interpretability, cluster samples in an unsupervised learning manner, and detect abnormal samples from the dataset. As shown in the experimental result, our method outperformed K-Means by 38% on the full dataset and 47% on the reduced dataset for unsupervised clustering. Multiple supervised classifiers improve accuracy by an average of 4% after removing abnormal samples by the proposed error detection approach. Therefore, the proposed algorithm provides a robust and practical solution for unsupervised clustering and error detection in healthcare data.

As the automotive industry undergoes a phase of rapid transformation driven by technological advancements, the integration of driving simulators stands out as an important tool for research and development. The usage of such simulators offers a controlled environment for studying driver behavior; the alignment of data, however, remains a complex aspect that warrants a thorough investigation. This research investigates driver state classification using a dataset obtained from real-road and simulated conditions, recorded through JINS MEME ES_R smart glasses. The data set encompasses electrooculography signals, with a focus on standardizing and processing data for subsequent analysis. For this purpose, we used a recurrent neural network model, which yielded a high accuracy on the testing dataset (86.5%). The findings of this study indicate that the proposed methodology could be used in real scenarios and that it could be used for the development of intelligent transportation systems and driver monitoring technology.

The construction industry is a key driver of environmental change due to its extensive ‎use of resources and high levels of emissions, thus placing a significant burden on global ‎efforts towards sustainable development targets. A large portion of the environmental ‎footprint of buildings results from the energy required to sustain indoor comfort levels. ‎Therefore, enhancing the energy efficiency of existing buildings becomes critical in ‎reducing their environmental impact. This study examines the influence of increasing ‎thermal performance with the aim of reducing heating ‎demand. Thus, numerical modelling tools and different energy performance assessment meth-odologies have been used. ‎Specifically, it evaluates two existing residential buildings in Romania and compares ‎heating demand predictions using PHPP and Mc001-2022 methodologies across various ‎climatic data sets and case studies. The results reveal significant variability in heating ‎demand predictions, emphasizing the importance of methodological choice and climatic ‎data. The ‎study highlights that both PHPP and Mc001-2022 methodologies yield varying results ‎depending on the specific conditions and characteristics of each building. This variation in results underscores ‎the necessity for a nuanced and context-specific approach to energy performance ‎assessment, in-corporating multiple energy efficiency measures tailored to the unique ‎features of each building.

This paper explores factors affecting Out-of-Pocket payments for healthcare expenditures in SAARC countries. The specific objectives of the paper were to compare healthcare expenditure patterns amongst the SAARC countries and explore the macroeconomic, demographic and social factors influencing OOP payments for healthcare these countries. The model selection tests suggest that the fixed effect model is the most appropriate for the data, though the random effect model also provides valuable insights. Fixed effect model result showed that a 1 per cent change in GDP per capita, consumer price index, population aged 65 years and above causes change in out-of-pocket payments for healthcare by 1.08 per cent (p< 0.01), 0.09 per cent (p< 0.05), 1.20 per cent (p

As technology advances, people are increasingly adopting IoT (Internet of Things) devices in smart cities. These devices are equipped with sensors that are connected everywhere, from energy infrastructure and transportation to telecommunications, health and human services, waste management, public safety, and more. People want to access sensor data anytime and everywhere to make better decisions and improve their lives. To achieve this, a sensor integration model has been developed where multiple sensors are integrated under one gateway to manage and share sensor data. However, effective sharing of sensor data requires data security, privacy, confidentiality, fairness, effective architectural design, and low communication and computation costs. These issues need to be addressed in the sensor integration model in smart cities. Existing storage models face challenges in managing sensor data effectively. To overcome these issues and hurdles, a data storage framework leveraging blockchain technology has been proposed within the sensor integration model. This framework ensures data security, privacy, confidentiality, and a fair and transparent financial model, all while minimizing communication and computation costs.

Measuring sound pressure is a complex and tedious task in industrial environments. Classical methods can be costly, inaccurate, and potentially dangerous for workers. Integrating robotics and computer vision into acoustic measurement processes offers an innovative solution to these problems. This paper uses a Doosan Robotic Vision System to investigate an innovative automatic acoustic sound pressure measurement solution. The Doosan robot, equipped with a scanning camera and microphone, captures acoustic data and produces a map of the machine’s acoustic radiation using computer vision algorithms. The measurement technique is accurate, efficient, and safe for workers. It can also be used for continuous monitoring of the industrial acoustic environment. The developed measurement method offers a promising way to automate acoustic measurement, which can be performed faster and with better accuracy to help industries improve their product sound quality and reduce noise levels. The method was compared to analytical predictions. A 3D acoustic mapping was conducted to visualize the spatial distribution of sound sources within the environment. The experimental results show a good correlation with the theory.

Artificial intelligence (AI) is a current trend in computer science, which extends itself its amazing capacities to other technologies such as mechatronics and robotics. Going beyond technological applications, the philosophy behind AI is that there is a vague and potential convergence of artificial manufacture and natural world although the limiting approach may be still very far away, but why? The implicit problem is that Darwin theory of evolution focuses on natural world where breeding conservation is the cornerstone of the existence of creature world but there is no similar concept of breeding conservation in artificial world whose things are created by human. However, after developing for a long time until now, AI issues an interesting concept of generation in which artifacts created by computer science can derive their new generations inheriting their aspects / characteristics. Such generated artifacts make us look back on offsprings by the process of breeding conservation in natural world. Therefore, it is possible to think that AI generation, which is a recent subject of AI, is a significant development in computer science as well as high-tech domain. AI generation does not help us to reach near biological evolution even in the case that AI can combine with biological technology but, AI generation can help us to extend our viewpoint about Darwin theory of evolution as well as there may exist some uncertain relationship between man-made world and natural world. Anyhow AI generation is a current important subject in AI and there are two main generative models in computer science: 1) generative model that applies large language model into generating natural language texts understandable by human and 2) generative model that applies deep neural network into generating digital content such as sound, image, and video. This technical report focuses on deep generative model (DGM) for digital content generation, which is a short summary of approaches to implement DGMs. Researchers can read this work as an introduction to DGM with easily understandable explanations.