The current COVID19 pandemic has raised huge concerns for outdoor air quality due to expected lungs deterioration. These concerns include the challenges in the scalable prediction of harmful gases like carbon dioxide, iterative/repetitive inhaling due to mask and environmental temperature harshness. Even in the presence of air quality sensing devices, these challenges lead to failed planning and strategy against respiratory diseases, epidemics, and pandemics in severe cases. In this work, a dual time-series with bi-cluster sensor data-stream-based novel optimized regression algorithm was proposed with optimization predictors and optimization responses that use automated iterative optimization of the model based on the similarity coefficient index. The algorithm was implemented over SeReNoV2 sensor nodes data, i.e. multi-variate dual time-series of environmental and US Environmental Protection Agency standard sensor variables for air quality index measured from air quality sensors with geospatial profiling. The SeReNoV2 systems were placed at four locations that were 3 km apart to monitor air quality and their data was collected at Ubidots IoT platform over GSM. Results have shown that the proposed technique achieved a root mean square error (RMSE) of 1.0042 with a training time of 469.28 seconds for normal and RMSE of 1.646 in the training time of 28.53 seconds for optimization. The estimated R-Squared error of 0.03 with Mean-Square Error for temperature 1.0084 ᵒC and 293.98 ppm for CO2 was observed. Furthermore, the Mean-Absolute Error (MAE) for temperature 0.66226 ᵒC and 10.252 ppm for CO2 at a prediction speed of ~5100 observations/second for temperature 45000 observations/second for CO2 due to iterative optimization of the training time 469.28 seconds for temperature and 28.53 seconds for CO2 was very promising in forecasting COVID19 countermeasures before time.

Drought and high temperature often occur simultaneously will eventually affect rice (Oryza sativa L.) yield and seed quality. The objective of the study was to compare the effects of high temperature (HT) and water limitation (WL) during seed development and maturation on yield component, seed quality, and amylose content in aerobic rice cv. MRIA. Two experiments were conducted concurrently in greenhouse with ⁓35/26℃ subjected to elevated HT and/or WL; 5 days 38/28°C at 10, 15, 29 DAA and/or HT; 7 days at 40/28℃ at 8 and 21 DAA with 12h photoperiod in control environment growth chamber. Both experiments were respectively harvested at physiological maturity of 31 and 35 DAA. Grain yielded from the irrigated plant declined from over 27% to below 18% between 15 and 29 DAA. Combination stresses resulted in greater reduction of grain yield than single stress. Late seed development (29 DAA) had no effect either on yield component or seed quality as well as produce a high concentration in amylase content (16.7%) with greater germination capacity (91%). The non-stress plant harvested at 21 DAA resulted the highest percentage of germinated seeds (97%) whereas the vigour index (VI) was reduced to 70.3% and 58.9% at 8 and 21 DAA respectively. Extended plant stress to 7 consecutive days incurred the highest VI with low concentration of amylose content. There was a linear relationship incurred between seed amylase content with germination capacity and VI, however, there was an inverse relationship (R2 = 0.19) between amylase content with VI from plant treated with (HT and/or WL) for 7 days. The present results confirmed that the avoidance HT and WL during early (10 DAA) and mid (15 DAA) seed development with short duration of stress (5 days) obtained better in yield component, enhanced the seed quality and amylose concentration. The combined HT and WL damaged seeds’ quality were more than each stress alone. Therefore, avoiding HT and WL can be practically applied by farmers by irrigating throughout the rice plant during histodifferentiation to save water usage during seed maturation.

As of now, anthropogenic habitat injury via dissemination of manufactured chemicals is injuring the world’s ecosystems, but doctors have yet to recognize its consequences to humans. Recognition of overt toxicity due to chronic low-dose exposure will open the door to diagnosis, sequential elimination studies, and prescriptions for preventive cure that represent a first step in preventing escalating chronic diseases. This paper offers a diagnostic construct for such use: chronic ambient poisoning. Incorporating it into clinical practice can reduce misdiagnosis of gastro- and near-toxicity that doctors and patients presently suppress rather than remove, and reduce patient co-dependence with proton-pump inhibitors, anxiolytics, and antidepressants—and the thriving “alternative” health industry. This diagnostic elephant-in-the-room is presently missed for reasons of habit (when an ailment is not recognized, it cannot be included in the differential diagnosis) and of poor conduct and interpretation of non-clinical research studies that are taken to mean an absence of evidence is evidence of absence. Moreover, modern methods fail when: the exposure comprises a “daily cocktail” of poisons acting additively, interactively, and cumulatively over a lifetime; when there is no normal, unexposed comparison group; and when absence of a robust etiopathogenetic model disallows inapt statistics. Only patient-led, consultant-informed sequential elimination studies can “peel the onion” of toxicity and its recognition and “preventive cure”. Clinical use of the chronic ambient poisoning diagnosis can thus open the door to stemming and reversing anthropogenic epidemics.

The purposes of this study are to analyze the groundwater quality of Ogallala Aquifer and evaluate the hydrological characteristics in the southern High Plains region of the Permian Basin, Texas. Levels of chloride, fluoride, nitrate, pH, selenium, and total dissolved solids (TDS) were analyzed through the years 1990-2016. A total of 133 wells were collected from the Texas Water Development Board (TWDB) which is an open database by the US government. Statistical analysis was utilized to evaluate the groundwater quality and propose trends. The average levels of the contaminants were compared to their respective Maximum Contaminant Levels (MCL) by the Environmental Protection Agency (EPA). Potential human health risks that each contaminant possesses were described. Possible sources of each contaminant were discussed with oil/gas activities, agricultural practices, and other human actions impact its conditions. This research provides important information for groundwater quality of Ogallala aquifer and contributes on understanding the response to development in the Permian Basin, Texas.

In this article, we aim to show the capabilities, benefits, as well as restrictions, of three different air quality-related information sources, namely the Sentinel-5Precursor TROPOspheric Monitoring Instrument (TROPOMI) space-born observations, the Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) ground-based measurements and the LOng Term Ozone Simulation – EURopean Operational Smog (LOTOS-EUROS) chemical transport modelling system simulations. The tropospheric NO2 concentrations between 2018 and 2021 are discussed as air quality indicators for the Greek cities of Thessaloniki and Ioannina. Each dataset was analysed in an autonomous manner and, without disregarding their differences, the common air quality picture that they provide is revealed. All three systems report a clear seasonal pattern, with high NO2 levels during winter-time and lower NO2 levels during summer-time, reflecting the importance of photochemistry in the abatement of this air pollutant. The spatial patterns of the NO2 load also showed, in both space-born observations and model simulations, the undeniable variability of the NO2 load within the urban agglomerations. The diurnal variability was furthermore clearly identified by the ground-based measurements, which also unquestionably revealed a Sunday minimum NO2 load effect, alongside the rest of the sources of air quality information. Within their individual strengths and limitations, the space-born observations, the ground-based measurements and the chemical transport modelling simulations, demonstrate unequivocally their ability to report on the air quality situation in urban locations.

Farmers and seed companies constantly require high-quality seeds with excellent agronomic performance. However, faced with environmental adversity, limited natural resources and increasing food demand around the globe, more attention has turned to improving crop plant production by implementing efficient strategies. Seed priming technology has shown promising biological improvements leading to suitable agronomic performance in crop plants under adverse environmental conditions. Seeds are subjected to controlled conditions that are conducive to complex physiological, biochemical, and molecular changes, conferring specific stress tolerance to subsequent germination and growth conditions. In this review paper, we aimed to study the recent approaches in the efficiency of hydropriming, osmopriming, chemopriming, hormopriming, nanopriming, matrix priming, biopriming, physical priming and hybrid priming procedures in the production of crop plants under environmental adversity, as well as their biological mechanism changes. All priming methods demonstrated relevant changes in the biological mechanism related to crop plant production by mitigating salinity effects, heavy metals, and flooding stress and enhancing chilling, heat, drought and phytopathogen tolerance. We strongly recommend that researchers combine multiple priming methods, known as hybrid priming, in their investigations to provide novel technologies and additional biological approaches to enhance the knowledge of crop plant science. Thus, the findings shed light on the use of seed priming technology as a key strategy to increase crop plant production under environmental adversity by acquiring stress tolerance and enhancing agronomic traits to meet the global food demand.

In the current scenario of changing climatic conditions and rising global population, there is always a need to explore novel, efficient, and economical natural products for the benefit of human kind. Biosurfactant is one of the latest explored microbial biomolecules that have been used in numerous fields, including agriculture, pharmaceuticals, cosmetics, food processing, and environment-cleaning industries as raw material, lubrication, wetting, foaming softening, making emulsions, and stabilizing dispersions. The amphiphilic nature of biosurfactant biomolecules showed great advantage, distributing themselves into two immiscible surfaces by reducing interfacial surface tension and increasing the solubility of hydrophobic compounds. Furthermore, their eco-friendly nature, low or even no toxic nature, durability at higher temperatures, and wide range of pH fluctuations making the microbial surfactants preferable compared to their chemical counterparts. Additionally, the biosurfactants can obviate the oxidation flow by eliciting the antioxidant property, antimicrobial, anticancer activity, and drug delivery system, further broadening their applicability in the food, pharmaceutical, and pharma industries. Nowadays, biosurfactant has been broadly utilized to improve the soil quality by improving the concentration of trace elements and mixed with pesticides or applied singly on the plant surfaces for plant disease management. In the present review, we summarise the latest aspect of microbial synthesized biosurfactant compounds, limiting factors of biosurfactant production, and their application in improving soil quality, plant disease management.

Although commercially-available low-cost air quality sensors have low accuracy, the sensor system are being used to collect the data for the regulation of PM2.5 emission caused by industrial activities or to estimate the personal exposure for PM2.5. In this work, to solve the accuracy problem of low-cost PM sensor, we developed a new PM2.5 calibration model by combining the deep neural network (DNN) optimized in calibration problem and a LSTM optimized in time-dependent characteristics. First, two datasets were generated to test the accuracy performance and generalization performance of the PM2.5 calibration machine learning (ML) model. The PM2.5 concentrations, temperature and humidity by low-cost sensor and gravimetric-based PM2.5 measuring instrument were sampled for a sufficiently long time. The proposed model was compared with benchmark (multiple linear regression model) and low-cost sensor results. For root mean square error (RMSE) for PM2.5 concentrations, the proposed model reduced 41-60% of error compared to the raw data of low-cost sensor, and reduced 30-51% of error compared to the benchmark model. R2 of ML model, MLR and raw data were 93, 80 and 59 %. Also, the developed model still showed consistent calibration performance when calibrated with new sensors in different locations. Low-cost sensors combined with ML model not only can improve the calibration performance of benchmark, but also can be applied to the sensor monitoring systems for various epidemiologic investigations and regulatory decisions.

Based on panel data of 31 provincial-level administrative units (excluding Hong Kong, Macao and Taiwan) in China from 2015 to 2019, using fixed effect model and mediation effect model, this paper makes an empirical analysis on the interaction among digital economy, industrial structure upgrade and high-quality economic development. The results show that, from the overall effect, the digital economy can significantly promote the high-quality development of the economy, and there are regular regional differences, and the relationship between the promotion intensity and the development level of the digital economy is proportional. From the mediation effect, in the relationship between digital economy and high-quality economic development, the upgrade of industrial structure has played a significant part of the mediation effect, the proportion of mediation effect is 25.17% . In addition, the mediation effect of industrial structure upgrade has obvious regional difference, the western area is the strongest, the eastern area is the second, the central area is the weakest. Based on the above research,the concrete policy suggestions are given to promote the development of digital economy and upgrade the level of industrial structure to promote the high-quality development of economy.

Information and Communication Technology (ICT) is at the heart of the Smart City approach, which constitutes the next level of cities’ and communities’ development across the globe. Thereby, ICT serves as the gluing component enabling different domains to interact with each other and facilitating the management and processing of vast amounts of data and information towards intelligently steering the cities infrastructure and processes, engaging the citizens and facilitating new services and applications on various aspects of urban life - e.g. supply chains, mobility, transportation, energy, citizens’ participation, public safety, interactions between citizens and the public administration, water management, parking and many other use cases and domains. Hence, given the fundamental role of ICT in cities in the near future, it is of paramount importance to lay the ground for a sustainable and reliable ICT infrastructure, which can enable a city/community to respond in a resilient way to upcoming challenges whilst increasing the quality of life for its citizens. This paper constitutes a continuation of a series of research documents and standardization activities, which relate to the concept of Open Urban Platforms (OUP) and the way they serve as a blueprint for each city/community towards the establishment of an ICT backbone. Thereby, the current paper emphasizes on the aspects of sustainability and resilient ICT, whilst reporting on our latest activities and related developments in the research area.

High levels of air pollution can contribute to high rate of the COVID-19 outbreaks. Air pollutants induce oxidative stress, inflammatory process, immune imbalance and coagulation at systemic level, making the organism susceptible to complications caused by various pathogens, including viruses, resulting in a possible important damage co-factor. Sperm cells are highly sensitive to the pro-oxidant effects of environmental pollutants, and may represent an important alarm bell indicating that the burden of environmental pressure in a certain area is causing damage to humans. A comparison of the maps of COVID-19 case fatality rates, male infertility rates and air pollution may suggest a way to understand the dynamics of the virus impact. Semen quality may be considered as an early and sensitive environmental marker, and also a potential susceptibility indicator to viral insults (including SARS-CoV-2 ) in heavily polluted areas. Therefore, assessing the burden of environmental exposure of a given population and its potential susceptibility to insults through early biological stress indicators may be helpful for predicting the risk of the adverse effects by the SARS-CoV-2 epidemic .

Electron Beam Melting (EBM) is an increasingly used Additive Manufacturing (AM) technique employed by many industrial sectors, including the medical device and aerospace industries. The application of this technology is, however, challenged by the lack of process monitoring and control system that underpins process repeatability and part quality reproducibility. An electronic imaging system prototype has been developed to serve as an EBM monitoring technique, the capabilities of which have been verified at room temperature and at 320+10°C. Nevertheless, in order to fully assess the applicability of this technique, the image quality needs to be investigated at a range of elevated temperatures to fully understand the influence of thermal noise due to heat. In this paper, electronic imaging pilot trials at elevated temperatures, ranging from room temperature to , were carried out. Image quality measure Q of the digital electron images was evaluated, and the influence of temperature was investigated. In this study, raw electronic images generated at higher temperatures had greater Q values, i.e. better global image quality. It has been demonstrated that, for temperatures between , the influence of temperature on electronic image quality was not adversely affecting the visual clarity of image features. It is envisaged that the prototype has significant potential to contribute to in-process EBM monitoring in many manufacturing sectors.

We propose a new technique to prepare statistically-robust benchmarking data for evaluating chemical transport model meteorology and air quality parameters within the urban boundary layer. The approach employs atmospheric class-typing, using nocturnal radon measurements to assign atmospheric mixing classes, and can be applied temporally (across the diurnal cycle), or spatially (to create angular distributions of pollutants as a top-down constraint on emissions inventories). In this study only a short (<1-month) campaign is used, but grouping of the relative mixing classes based on nocturnal mean radon concentrations can be adjusted according to dataset length (i.e., number of days per category), or desired range of within-class variability. Calculating hourly distributions of observed and simulated values across diurnal composites of each class-type helps to: (i) bridge the gap between scales of simulation and observation, (ii) represent the variability associated with spatial and temporal heterogeneity of sources and meteorology without being confused by it, and (iii) provide an objective way to group results over whole diurnal cycles that separates ‘natural complicating factors’ (synoptic non-stationarity, rainfall, mesoscale motions, extreme stability, etc.) from problems related to parameterizations, or between-model differences. We demonstrate the utility of this technique using output from a suite of seven contemporary regional forecast and chemical transport models. Meteorological model skill varied across the diurnal cycle for all models, with an additional dependence on the atmospheric mixing class that varied between models. From an air quality perspective, model skill regarding the duration and magnitude of morning and evening “rush hour” pollution events varied strongly as a function of mixing class. Model skill was typically the lowest when public exposure would have been the highest, which has important implications for assessing potential health risks in new and rapidly evolving urban regions, and also for prioritizing the areas of model improvement for future applications.

The operations of digitization, transmission and storage of medical data, particularly images require increasingly effective encoding methods not only in terms of compression ratio and flow of information but also in terms of visual quality. At first, there was DCT (discrete cosine transform) then DWT (discrete wavelet transform) and their associated standards in terms of coding and image compression. After that, the 2nd generation wavelets seeks to be positioned and confronted to the image and video coding methods currently used. It is in this context that we suggested a method combining bandelets and SPIHT (set partitioning in hierarchical trees) algorithm. There are two main reasons for our approach: the first lies in the nature of the bandelet transform to take advantage by capturing the geometrical complexity of the image structure. The second reason stems in the suitability of encoding the bandelet coefficients by the SPIHT encoder. Quality measurements shows that in some cases (for low bit rates) the performances of the proposed coding compete with the well-established ones and opens up new application prospects in the field of medical imaging.

This case study investigates the effects of ventilation intervention on measured and perceived indoor air quality (IAQ) in a repaired school where occupants reported IAQ problems. Occupants´ symptoms were suspected to be related to the impurities leaked indoors through the building envelope. The study’s aim was to determine whether a positive pressure of 5-7 Pa prevents the infiltration of harmful chemical and microbiological agents from structures, thus decreasing symptoms and discomfort. Ventilation intervention was conducted in a building section comprising 12 classrooms and was completed with IAQ measurements and occupants´ questionnaires. After intervention, the concentration of total volatile organic compounds (TVOC) and fine particulate matter (PM_2.5) decreased, and occupants´ negative perceptions became more moderate compared to those for other parts of the building. The indoor mycobiota differed in species composition from the outdoor mycobiota, and changed remarkably with the intervention, indicating that some species may have emanated from an indoor source before the intervention.

Video quality assessment (VQA) plays an important role in video applications for quality evaluation and resource allocation. It aims to evaluate the video quality consistent with the human perception. In this letter, a hierarchical gradient similarity based VQA metric is proposed inspired by the structure of the primate visual cortex, in which visual information is processed through sequential visual areas. These areas are modeled with the corresponding measures to evaluate the overall perceptual quality. Experimental results on the LIVE database show that the proposed VQA metric significantly outperforms the state-of-the-art VQA metrics.

Research into professionalization in health and safety has recently gained in interest. Graduate training is one of the factors that determines or conditions the role of the safety professional, thus intervene in the professionalization process. This article is the result of a workshop and the discussions of nine academic directors of safety education programs about quality evaluation. This article introduces the issue with a historic overview of safety education, presents a synthesis of nine selected education programs, discusses quality evaluation of health and safety education programs, propose a quality evaluation frame and finally, proposes a process for designing a quality safety education program with an associated model of the learning objectives. The outcomes are interesting for everyone who is interested in health and safety education and quality evaluation and will give insights into how safety professionals are educated.

A discharge mixing zone (DMZ) is a defined geographical area or volume of water in the receiving environment of a discharge where initial dilution of the effluent occurs and where exceedance of water quality criteria may be permitted. DMZs are essential to inform determination of discharge consent conditions and an important element of risk management frameworks to reduce any effects of the discharges on the environment and human health. In this review, we describe the principles and technical application of DMZs. We present an overview of the physical processes that govern the dispersion and dilution of wastewater discharges and the fate of contaminants in coastal environments and define key criteria for determining the size of DMZs. We summarize DMZ requirements in international legislation and guidance and exemplify their application to different types of discharges by means of case studies. The selected case studies illustrate different modelling tools for defining DMZs and different monitoring approaches to assess their effectiveness in achieving ecological and human health objectives.

The bivalve mollusk, Anadara tuberculosa (Black Shell, in Spanish Concha prieta, "CP"), is found on America's Pacific coast, where it is harvested for subsistence and commercial markets. This paper aims to diagnose the performance of the black shell's value chain. We also identify several challenges that must be addressed to improve the sustainability of the black shell fishery in Ecuador. The descriptive methodology was quantitative, with a non-experimental, field, cross-sectional, and ex post facto design. Similar questionnaires were designed, validated, and applied to each link in the production chain to collect information. The performance of the value chain was diagnosed in the dimensions of productivity, competitiveness, and quality of life, reaching a 75.1% index, a result that indicates that the value chain has a moderate to good performance level. However, the value chain can be improved if the following challenges are met: 1) Restoration of the mangrove ecosystem, 2) Promotion of low-intensity shellfish aquaculture, 3) Good sanitary management and purification, 4) Promotion of value-focused ventures, 5) Strengthening of organizations and agreements for the use and custody of mangroves, and 6) Strengthening of institutions that contribute to the advancement of these challenges.

While current video quality assessment research predominantly revolves around resolutions of 4K and beyond, targeted at Ultra High-Definition (UHD) displays, effective video quality for mobile video streaming remains primarily within the range of 480p to 1080p. In this study, we conducted a comparative analysis of the Quality of Experience (QoE) for widely implemented video codecs on mobile devices, specifically Advanced Video Coding (AVC), its successor High-Efficiency Video Coding (HEVC), and Google's VP9. Our choice of 720p video sequences from a newly developed database, all with identical bitrates, aimed to maintain a manageable subjective assessment duration, capped at 35-40 minutes. To mimic real-time network conditions, we generated stimuli by streaming original video clips over a controlled emulated setup, subjecting them to eight different packet loss scenarios. We evaluated the quality and structural similarity of the distorted video clips using objective metrics, including Video Quality Metric (VQM), Peak Signal-to-Noise Ratio (PSNR), Video Multi-Method Assessment Fusion (VMAF), and Multi-Scale Structural Similarity Index (MS-SSIM). Subsequently, we collected subjective ratings through a custom mobile application developed for Android devices. Our findings revealed that VMAF accurately represents the degradation in video quality compared to other metrics. Moreover, in most cases, HEVC exhibits an advantage over both AVC and VP9 under low packet loss scenarios. However, it is noteworthy that in our test cases, AVC outperformed HEVC and VP9 in scenarios with high packet loss, based on both subjective and objective assessments. Our observations further indicate that user preferences for the presented content contribute to video quality ratings, emphasizing the importance of additional factors that influence the perceived video quality of end-users.

Accounting studies neglected to link corporate social responsibility to accounting information, the theoretical background revealed the study gap and the paper referred to it in the question: Do the corporate social responsibility CSR dimensions affect the accounting information quality? as the study aimed to reveal the effect of corporate social responsibility dimensions (economic, ethical, legal, and philanthropic) on accounting information quality (relevance and reliability) in banks in the Riyadh Governorate in Saudi Arabia. The researcher used a questionnaire to collect data from the study sample, and the data analysis was done using SPSS and smart partial least squares (pls), and its reliability and validity have been confirmed. Result revealed a positive effect of CSR (economic, ethical) dimension on the relevance of accounting information, a negative effect of CSR Legal dimension on the relevance of accounting information, and no effect of CSR philanthropic dimension on the relevance of accounting information, a positive effect of CSR (ethical, philanthropic) dimension on the reliability of accounting information and no effect of CSR economic and legal dimension on the reliability of accounting information.

The Selective Paste Intrusion (SPI) method is a layer-by-layer additive manufacturing technique that allows for the production of complex geometries in concrete elements by selectively bonding aggregates with cement paste in a particle bed. To create reinforced concrete, the Wire and Arc Additive Manufacturing (WAAM) process shall be integrated into SPI. This technique allows the production of almost free-formed reinforcement and thus complements the advantage of SPI to produce free-formed structures of almost any geometry. However, integration of WAAM into SPI poses a considerable challenge, as high temperatures are generated during the welding process. These temperatures can negatively affect the rheological properties of the cement paste, in turn the penetration behavior of the paste in the particle bed and, subsequently, the mechanical properties of the hardened concrete. A possible passive cooling strategy is to increase the protruding length of the reinforcement bars out of the particle-bed. This requires that the distance of the print nozzle to the particle bed is as well increased, since it must be possible to move it across the reinforcement. The objective was thus to investigate the effect of that distance on print quality and to quantify a maximum allowable distance for an adequate print quality (for the printer setting used) in terms of shape accuracy and concrete strength. Compressive and flexural strength tests as well as geometrical measurements using a 3D scanning method were performed on specimen, printed with varying print nozzle to particle bed distances. It can be stated that for the used SPI print-heads, nozzle-types and parameter settings, the distance between the nozzle and the particle bed should not exceed 50 mm to ensure sufficient print quality in both shape accuracy and mechanical strength.

The objective was to analyze the effects of adding anthocyanin delphinidin-3-O-sambubioside and cyanidin-3-O-sambubioside of Hibiscus sabdariffa L. in animal diets. Scientific articles published before 2021 in clinics, pharmacology, nutrition, and animal production were included. The grains/concentrate, metabolic exigency, and caloric stress contribute to increasing the reactive oxygen species (ROS); the excess of ROS unbalance the oxidants and antioxidants. Cyanidin-3-O-sambubioside and delphinidin-3-O-sambubioside have antioxidant, antibacterial, antiviral, and anthelmintic activities. In the rumen, anthocyanin might show interactions and/or synergisms with substrates, microorganisms, and enzymes which could reduce the fiber degradability, but increase the potential methane (CH4) emissions; since anthocyanin interferes in the biohydrogenation of fats, they increase the fat milk and meat quality. Anthocyanins reduce plasma oxidation and deposit in tissues, increasing the milk and meat antioxidant activities. Cyanidin-3-O-sambubioside and delphinidin-3-O-sambubioside act as inhibitors of the angiotensin-converting enzyme (ACEi) and rennin expression which may improve milk yield (there is not enough evidence in ruminants, though). Polyphenols affect the reproductive potential. Sub products of HS contain as many amounts of polyphenols as calyces, and their inclusion in diets would positively affect the average daily gain and fat meat quality. Including HS in ruminant diets can improve the meat and milk quality.

In a changing climate, extreme weather events such as heat waves will be more frequent and could affect grain weight and the quality of crops such as wheat, one of the most significant crops in terms of global food security. In this work, we characterized the response of Triticum turgidum spp. durum wheat to a short-term heat-stress (HS) treatment at transcriptomic and physiological levels during early grain filling in glasshouse experiments. We found a significant reduction in grain weight and size from HS treatment. Grain quality was also affected, showing a decrease in starch content in addition to increments in grain protein levels. Moreover, an RNA-seq analysis of durum wheat grains allowed us to identify 1590 differentially expressed genes related to photosynthesis, response to heat, and carbohydrate metabolic process. A gene regulatory network analysis of HS-responsive genes uncovered novel transcription factors (TFs) controlling the expression of genes involved in abiotic stress response and grain quality, such as a member of the DOF family predicted to regulate glycogen and starch biosynthetic processes in response to HS in grains. In summary, our results provide new insights into the extensive transcriptome reprogramming that occurs during short-term HS in durum wheat grains.

The high-quality development of urban-rural integration is a vital component of China's economy, serving as a strategic response to the in-depth deployment of new urbanization and rural revitalization strategies. This integration is underscored by the promotion of entrepreneurship in agriculture, rural areas, and among farmers, which acts as a driver for fostering high-quality development in urban-rural areas through market competition. The resulting influx of resources and commodities with similar characteristics plays a crucial role in bridging the urban-rural divide. To maintain objectivity, it is important to adopt a balanced approach and refrain from using biased language. This study delves into the connotation and internal mechanism of the high-quality development of urban-rural integration, centering on the principle of 'quality'. Specifically, it examines the role of entrepreneurship in agriculture, rural areas, and among farmers, and evaluates its direct impact and transmission mechanism. The research employs balanced panel data from 41 cities in the Yangtze River Delta region spanning from 2003 to 2021. The findings reveal that entrepreneurship in agriculture, rural areas, and among farmers serves as a catalyst for promoting high-quality urban-rural development through the construction of a virtuous cycle, whereby resource factors and commodity services are exchanged. Moreover, this deep integration yields diverse effects across economic, spatial, demographic, social, and ecological domains, underscoring the necessity of continued support for entrepreneurship in agriculture, rural areas, and among farmers to facilitate a seamless urban-rural economic cycle and fully realize the benefits of high-quality development.

Objective: The objective of our study was to explore the potential benefits of combining moderate alcohol consumption with regular vigorous physical activity on HDL-cholesterol levels and its potential positive impact on cardiovascular health. Material and method: The study comprised two groups: group A (102 patients) who consumed 1 gram of alcohol per day, specifically red wine, and increased their exercise levels in addition to their standard medical treatment, and group B (108 patients) who adhered only to their standard medical treatment. The patients were monitored for a year, during which various clinical parameters were observed. Results:Our study showed that moderate alcohol consumption, particularly red wine, along with increased physical activity levels, was associated with enhancements in exercise tolerance and elevated levels of HDL-cholesterol. Our findings suggest the efficacy of the intervention in improving lipid profiles, with the group that consumed alcohol as part of their treatment scheme, generally experiencing more pronounced positive effects. Statistically significant differences between groups in terms of angina evolution, AMI recurrence, or arrhythmias evolution were not found. However, there were important differences in terms of EF improvement and quality of life, with the alcohol consuming group displaying greater improvements in both aspects. Conclusions:In conclusion, our study emphasizes the potential benefits of combining moderate alcohol consumption, specifically red wine, with increased physical activity levels for improving exercise tolerance and enhancing HDL-cholesterol levels. However, further research and clinical trials are essential to fully understand the mechanisms and optimize the integration of these lifestyle elements for improved cardiovascular health outcomes.

Existing research lacks studies that explore the impact of government fiscal support on the high-quality development of regional economy and society from the perspective of livelihood-based infrastructure construction. The investigation in this paper explores the economic and social effects of government fiscal support behavior from the perspective of livelihood infrastructure construction. On the basis of the TOPSIS-Entropy Method, this paper constructs an evaluation indicator that closely conforms to the denotation and requirements of high-quality development and then carries out empirical regressions in combination with government expenditure on people's livelihood to verify the theoretical hypothesis, whose transmission mechanism and moderating effect are further empirically tested. The results reveal that increasing government expenditure on people's livelihoods can effectively improve regional high-quality development, but the marginal improvement degree varies with different periods and locations. The mechanism test proves that the regional consumption level plays a significant part in the mediating effect, accounting for 24.27% of the total effect. Urbanization is also the critical impetus for regional high-quality development and positively moderates the promotion effect of people's livelihood fiscal expenditure. Our study presents a theoretical basis and policy inspiration for improving residents' quality of life and welfare level and improving people's livelihood in the midst of high-quality economic development.

Abstract: Peptide pools composed of short amino acid sequences have proven to be versatile tools in various research areas and clinical applications. They are powerful tools for epitope mapping, immunotherapy, and vaccine development. Their importance lies in their ability to map complex protein structures, enabling a comprehensive understanding of immune responses and facilitating the identification of potential therapeutic agents. The application of peptide pools also extends to the field of personalized medicine, offering tailored solutions for diseases such as cancer and infectious diseases. Peptide pools are complex mixtures of immunostimulatory antigens primarily intended for T-cell stimulation. They are commercially available in many different compositions and variants. However, unlike other reagents that consist of only one or a few compounds, peptide pools are highly complex products with limited stability. This makes their quality control a major challenge. Quantitative peptide analysis usually requires sophisticated methods, in most cases isotope-labeled standards and reference materials. None of these are routinely available for these products. Synthesis and purification of all labeled peptides might be required. Usually, this approach would be prohibitively laborious and expensive. Therefore, an approach is needed to provide a practical and feasible method for quality control of peptide pools. With insufficient quality control, the use of such products could lead to incorrect experimental results, which would worsen the well-known reproducibility crisis in the biomedical sciences. Here we propose the use of ultra-high performance liquid chromatography (UHPLC) with two detectors, a standard UV detector (at 214 nm) for quantitative analysis and a high-resolution mass spectrometer (HRMS) for identity confirmation. To be cost-efficient and fast, quantification and identification are performed in one chromatographic run. An optimized protocol is shown, and different peak integration methods are compared and discussed. This work was performed using a peptide pool known as CEF, which consists of 32 peptides derived from cytomegalovirus (CMV), Epstein-Barr virus (EBV) and influenza virus, ranging from 8 to 12 amino acids in length.

For many years, the programmable positioners have been widely applied in structures of modern electro-pneumatic final control elements. The positioner consists of an electro-pneumatic transducer, embedded controller and measuring instrumentation. Electro-pneumatic transducers that are used in positioners are characterized by a relatively short mean time-to-failure. The practical and economical method of a reasonable prolongation of this time is proposed in this paper. It is principally based on assessment and minimizing the effort of the embedded controller. For this purpose, were introduced: the control value variability, mean-time and the cumulative controller's effort. The diminishing of controller effort has significant practical repercussions, because it reduces the intensity of mechanical wear of the final control element components. On the other hand, the reduction of the cumulative effort is important in the context of process economy due to limitation of the consumption of energy of compressed air supplying the final control element. Therefore, the minimization of introduced effort factors has an impact on increasing the functional safety and economics of the controlled process. As a result of the performed simulations, the recommendations regarding the selection of the structure and tuning of positioner controller were elaborated. The simulations were performed in the Matlab-Simulink environment with the use of the liquid level control system in which a phenomenological model of a final control element was deployed. It has been proven that under appropriate conditions, it is possible to extend significantly the lifetime of the final control element and simultaneously enhance the control quality factors.

This study was to determine the effects of different irrigation, fertigation and mulching applications on the yield and quality parameters of strawberries. The study was conducted at the Bursa Uludağ University Yenişehir Ibrahim Orhan Vocational School Agricultural Research Field in 2019-2020. In the research, four different irrigation topics, three different fertigation and three different mulching topics were selected The maximum and minimum yield values of the study years were calculated as 5.05-18.70 t ha-1 and 1.20-8.7 t ha-1, respectively, from I100F100M1 and I25F50M0 treatments. As a result, a three-factor study determined that irrigation, fertigation, and mulching had a significant effect on the yield and quality characteristics of strawberries. However, when the reductions in yield and quality losses are evaluated together, despite the reductions in irrigation water and fertigation levels, I75 and F75 topics can be recommended. Also, in mulching treatments, black mulch material (M1) should be chosen over clear mulch material (M1) and no mulch (M0).

Use of fingerprints found at a crime scene is a common practice for identifying suspects in criminal investigations. Over the past two decades, attempts have been made to obtain additional information from fingerprints, beyond locating suspects as part of an investigation. This includes gender, age and nationality. Researchers demonstrated 75%-90% accuracy in gender classification based on fingerprint images. Nonetheless, despite promising results, these studies have several significant shortcomings with respect to their practical feasibility. First, they ignore the low quality and quantity of fingerprints collected from the crime scene since typically the scene of a crime has only one fingerprint collected, and the fingerprint might be partially or of poor quality as well. Second, as most results are based on a single database, public or private, it is difficult to generalize the most suitable method. Third, studies miss the untapped potential of Data-Centric AI (DCAI) approaches for improving results. The aim of this study was to compare, for the first time, the gender classification from a fingerprint using several datasets and with varying fingerprint image quality. The results from four databases are compared, three public and one internal private database. In addition, we utilize the latest Data-Centric AI (DCAI) approaches for improving classification results. The results demonstrate that a conservative Convolutional Neural Networks (CNN) such as VGG is sufficient for this task. Classification accuracy ranges from 80% to 95% depending on the quality of the fingerprint, with DCAI approaches adding 1%-4% improvement. For partially or low-quality fingerprint images, the periphery of a fingerprint is the most significant area for determining gender. The source code is also provided here for practical application.

Objectives: The aim of this study was to compare the performance of the EQ-5D-Y-3L (Y-3L) and the expanded five level version, the EQ-5D-Y-5L (Y-5L). Methods: Children/adolescents with an acute or chronic health condition and from the general population completed the Y-5L and Y-3L self-report questionnaires. Performance of the Y-5L and Y-3L was determined by comparing feasibility, redistribution of dimension responses, discriminatory power, validity, and test-retest reliability. Results. Five hundred and fifty children/adolescents completed baseline measures and 173 completed repeat measures. The ceiling effect decreased by 15% from the Y-3L to Y-5L. Informativity of dimensions improved by 0.094 on the Y-5L. There was a range of 4-9% inconsistent responses moving from the Y-3L to Y-5L. Convergent validity of the Visual Analogue Scale (VAS) and Y-3L, Y-5L dimensions was similar, weak to moderate (r_s range: 0.18 – 0.38) but similar and strong on paired Y-3L and Y-5L dimensions: Kendall Tau B (range 0.69 – 0.80) and Gamma (range 0.92 – 0.98). The Y-5L and Y-3L showed moderate to substantial agreement for test-retest reliability across dimensions and VAS scores in stable chronic health conditions and fair agreement for the general population. Conclusion: The EQ-5D-Y-5L is a valid, reliable extension of the Y-3L for children/adolescents across health conditions and healthy children/adolescents. The expanded levels reduced the ceiling effect. The relative informativity of report across dimensions increased on the Y-5L compared to the Y-3L with retention of the evenness of reporting. The convergent validity and test-retest reliability of the Y-5L was comparable to the Y-3L.

Water quality is the measure of chemical, physical and biological suitability of water in relation to natural effects and intended purpose which may affect human health and aquatic life. Assessment of water quality is very essential for the management of water resources and human health. Traditionally, in-situ measurements have been used to obtain the water quality parameters of the water bodies. However, with the availability of satellite images, researchers have shown that satellite images are a reliable tool that can be used to estimate water quality. Satellite image-derived water quality parameters provide extensive spatial extent and large temporal variations when compared to traditional in situ sample collection and laboratory measurements. The present work estimated several parameters for quality of water in the Kamuzu reservoir of Lilongwe River for the 2013-2020 period using Sentinel-2 and Landsat-8 satellite images. The band ratio algorithms were used to retrieve Chlorophyll a (Chl-a), Turbidity, Total Suspended Matter (TSM), Secchi depth, Coloured Dissolved Organic Matter (CDOM), and Cyanobacteria from the reservoir. Turbidity and TSM were compared with the in-situ data collected over the same period. The comparison indicated R² of 0.9 and 0.69 for TSM and Turbidity respectively from Sentinel-2 images whereas R² of 0.56 and 0.61 was obtained using Landsat 8 images which are quite encouraging. The other set of results included the spatial distribution maps of water quality parameters using Landsat-8 and Sentinel-2 satellite data. It was observed that the spatial distribution of water quality parameters, except for CDOM and Cyanobacteria, showed very good distribution and matches with the theoretical results. However, for CDOM and Cyanobacteria, the distribution was almost similar for the entire study area and the band ratio algorithm may not be able to estimate them quite reasonably. This research reiterates the need for the use of remote sensing in estimating the water quality parameters and may be a substitute to the in-situ data, in terms of spread and frequency, which is very common to most of the water bodies, across the globe.

Power quality problem is a hot area in power systems and drives that has drawn the attention of many researchers. This is because of the threat it poses on the health of electrical systems and the cost incurred on utility bills. The problem arises as a result of the need for reactive power to be supplied alongside active power in power transmission and distribution. Unfortunately, reactive power is consumed by almost all components of the system, leading to a shortage. To solve this problem, there is a need to compensate for the lost reactive power. Several researchers have proposed various approaches to mitigate this problem such as thyristor switched capacitor bank, series compensator, series reactor, series var compensator (SVC), Static Synchronous Compensator (STATCOM), synchronous condenser and others. In order to further draw attention in this area, this work investigates a number of research papers on power compensation techniques and draw up challenges from each work that can be considered for further investigation. To this end, each research paper reviewed is evaluated in terms of problem solved, technique used, and results obtained. It therefore offers ample opportunities for researchers to explore in improving power quality and power system safety.

Telemedicine has emerged as a transformative tool in modern healthcare, particularly during the COVID-19 pandemic, which catalyzed its rapid expansion. Despite its demonstrated potential in enhancing remote patient monitoring, AI-driven diagnostics, and telepsychiatry, widespread adoption of telemedicine remains constrained by persistent barriers. This review examines the current state of telemedicine, identifying major advancements alongside key challenges that impede its full integration into global healthcare systems. These barriers include the digital divide, regulatory inconsistencies across regions, and patient concerns about data security and the quality of virtual care. Addressing these issues requires a coordinated multi-sectoral approach, emphasizing infrastructure development, regulatory harmonization, patient education, and the incorporation of emerging technologies such as AI, blockchain, and virtual reality. By overcoming these challenges, telemedicine can be established as a cornerstone of equitable, accessible, and patient-centered healthcare worldwide.

Low pasture biomass production and fodder scarcity are among the major challenges affecting productivity of dairy cattle farms in Sri Lanka. As a potential solution to this, two Napier hybrid cultivars CO-5 and Sampoorna were recently introduced and a field experiment was conducted to evaluate their growth, dry matter production and nutritional composition during May to September 2020. Plant measurements and samples were collected at five harvest intervals (4, 6, 8, 10 and 12 weeks after planting), with the plant samples subjected to biomass and nutritional assessments. The number of tillers and leaf length differed (P=0.01) between the two cultivars at 4 weeks harvesting interval (HI) whilst number of leaves differed at 12 HI respectively. Dry matter yield increased (P=0.16) almost linearly whilst crude protein declined exponentially with CO-5 greater than Sampoorna (P=0.057; 9.3% vs 8.7%), with increasing harvesting intervals respectively. In-vitro Organic Matter Digestibility and In-vitro Metabolizable Energy contents were similar across weeks 4, 6 and 8 but then decreased. This study demonstrates that higher dry matter yields (12.54 t/ha) can be obtained by harvesting both cultivars at 12 HI, but from a nutritional perspective harvesting at 6 HI during Yala season of the year would be optimum for farmers.

Objective: The private healthcare providers (PHCP) are believed to improve access to healthcare services in Public-Private Mix (PPM) projects, as they are considered first point of contact for healthcare. The purpose of this study was to know the satisfaction level of TB patients. Design: A questionnaire-based, cross-sectional study was carried out during November and December 2017 for 572 under-treatment patients registered with PHCPs in the PPM project. Lot quality assurance sampling technique was used to randomly select 19 districts from sample frame of 75 districts. In each selected district, data collector retrieved TB register of 8 months (Jan – Aug 2017) and systematically selected patients by fixed periodic interval. SPSS (version 24.0) was used to analyze the data. Results: Study included 53% (n=301) of males and 47% (n=271) of females, with mean age of 38 years (SD, ±18). Almost half of the participants were illiterate (51%, n=289) and 64% (n=365) were non-earning members of the family. In practice, most of the participants visit private providers (71%, n=407), including private hospital/clinic (44%) and traditional practitioners (27%; n=153). 55% of participants visited the current doctor because of clinic’s proximity to residence. 82% of the participants (n=469) were satisfied with the TB care services and 85% (n=488) said that they would recommend this clinic to others. Conclusion: PHCPs are preferred providers for individuals, which is consistent with findings of other studies. Though they are satisfied with TB care and services, interventions should be introduced to reduce the financial burden on the patient. Partnering PHCP is a way forward to ensure universal health coverage, health system strengthening and better health outcomes of the population.

The paper aims to develop and test an algorithm for classifying Russian-language text reviews of patients’ experiences with medical facilities and physicians, extracted from social media. This is motivated by the limitations of conventional methods of surveying consumers to assess their satisfaction with the quality of services, which are being replaced by automatic processing of text data from social media. This approach enables to get more objective results due to the increased representativeness and independence of the sample of service consumers. The authors have tested machine learning methods using various neural network architectures. A hybrid method was developed to classify text reviews of medical facilities posted by patients on the two most popular physician review websites in Russia. Overall, more than 60,000 reviews were analysed. The main results are as follows: 1) the classification algorithm developed by the authors has a high efficiency, the best result being achieved by the GRU-based architecture (val_accuracy = 0.9271); 2) applying the named entity search method to text messages following their partitioning improved the classification efficiency for each of the classifiers based on artificial neural networks. To further enhance the classification quality, reviews need to be semantically partitioned by target and sentiment and the resulting fragments need to be analysed separately.

The present study finds the association of board characteristics (such as gender diversity, independence, female chairperson or/and female CEO, and board size) and the quality of Corporate Social Responsibility (CSR) disclosure of the top 100 Pakistan Stock Exchange (PSX) listed companies. Unlike most earlier studies in similar contexts, we have focused on CSR disclosure ‘quality’ and not ‘quantity’. We conducted the content analysis of secondary Corporate Governance (CG) and CSR data extracted from the annual reports of PSX-listed companies across ten industrial sectors from period of 2017 and 2018. Our empirical investigation through univariate and multiple regression analysis with Ordinary least squares (OLS) techniques revealed that all the board characteristics potentially have a significant association in lessening CSR disclosure quality. We acknowledge several research limitations, including the study time period and selected board characteristics. While our study has provided some understanding of the association of board characteristics with CSR disclosure quality of PSX-listed companies, several research gaps still need to be addressed. Future investigators should examine this association through the pre-COVID-19 and post-COVID-19 connections and the inclusion of a systems theory perspective.

This study examines the spatial impact of FDI on the poverty of 44 African countries. In achieving this, the study uses the Driscoll-Kraay fixed effect instrumental variable regression, instrumental variable generalised method of moments estimator (IV-GMM), and the spatial durbin model. The empirical investigation of this study yielded four significant findings: (1) neighbouring countries’ FDI has a positive and significant impact on the incidence and intensity of host country’s poverty. (2) Improved institutional quality in neighbouring countries has a significant impact on FDI-poverty reduction nexus of the host country. (3) the empirical results lend support for a significant spatial spillover of poverty in the region. (4) the marginal effect results indicate that countries within the region are no longer in isolation or independent, i.e., the level of poverty in a particular country is influenced by its determinants in the neighbouring country. This result is robust to the alternative proximity matrix, which is the inverse distance. Since there is spatial interdependence among African countries, we recommend that African governments through the African Union (AU) should not only champion the institutional reform in the region, but also establish a binding mechanism to ensure reform implementation.

One of the rapidly developing research areas is the creation of systems. which are commonly referred to as cyberphysical complexes. In such systems, devices and complexes interact with a completely different physical nature. The role of a person in such systems usually consists in the formation of final tasks for “artificial intelligence” and executive mechanisms. The functioning of actuators is controlled by accurate information systems.

Background: Low-level physical activity (PA) among Chronic Low Back Pain (cLBP) is associated with various biopsychosocial factors. This research aimed to study the predictors of PA behavior among cLBP patients. Methods: In the present study 300 eligible patients with cLBP who referred to comprehensive health service centers in the Shahid Beheshti University of Medical Sciences (SBUMS) in Tehran, Iran were random selected.To diagnose the predictors of PA behavior, all the Theory of Reasoned Action (TRA) constructs were examined as risk factors to see if they influence on the probability of PA behavior occurrence and were interpreted through odds ratio (OR). SPSS version 19 was used to analyze the data. Results: Totally 280 cLBP patients with mean age of 57.07 ±13.09 years old participated in the study. This study showed that motivation to comply significant predictor the cLBP patients for subjective norm OR (%95CI): 2.095(0.116-2.792), p-value<0.001), intention was significant predictor for perform the PA behavior OR (%95CI): 1.431(0.138-1.538), p-value <0.001), behavior beliefs could predictor for attitude OR (%95CI): 1.276(0.106-1.355), p-value= 0.002). attitude, normative beliefs, subjective norm ,and evaluation outcome behavior could predictors the cLBP patients for intention to perform the PA behavior OR (%95CI): 1.188(0.032-1.312), p-value<0.001)., OR (%95CI): 1.158(0.076-2.208), p-value=0.003) ., OR (%95CI): 1.104(0.076-1.128), p-value<0.001) ., OR (%95CI): 0.814(0.301-1.440), p-value=0.007). Conclusions: This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm).

Big data quality is all about ensuring that the huge amounts of data are accurate, reliable, and useful. It is important because decisions made based on this data can affect many things, like business strategies, customer experiences, and even public policies. Many researchers are studying data quality in the context of big data. This study aims to analyze the research trends and patterns within the domain of big data quality. This method reveals hidden themes in large datasets, helping to understand data quality better. The findings show that Latent Dirichlet Allocation (LDA) is effective for topic modeling in big data, highlighting data quality challenges and opportunities. The research identified key trends and effective assessment methods. For researchers, using LDA in a systematic review helps summarize existing studies and find gaps, guiding future research. Practitioners and future researchers get useful direction for managing data quality and improving efficiency and decisions in various industries.

Little is known about skeletal muscle thickness, echogenicity, and muscle quality (handgrip strength /muscle thickness) in breast cancer-related lymphedema (BCRL). Using B-mode ultrasound, we recorded the raw radiofrequency data of the affected (AA) and unaffected (UA) arms of women (n=20) with BCRL, and in 20 control women with no lymphedema (CA). The data were converted into images and measurements of skin, subcutaneous fat and muscle thickness were obtained. Within a designated region of interest, muscle echo-intensity was assessed using computer graded grey scale and muscle thickness was measured using ImageJ2. Handgrip strength was measured using standard dynamometry. We found that forearm muscle thickness was similar among AA, UA, and CA. When compared to the unaffected and control arms, the affected arm had a significantly higher (p 0.013) muscle echo-intensity. When compared to the AA, handgrip strength was similar to UA (p 0.401) but lower than CA (p 0.05). We conclude that the use of B-mode ultrasound is a reliable method to assess muscle thickness and EI in BCRL. When comparing AA to UA, the elevated levels of muscle EI in AA did not influence strength or muscle quality. The elevated EI in AA is a marker of abnormal health that needs to be further explored.

Ensuring safe, high-quality food is an ongoing priority, yet consumers face heightened risk from foodborne pathogens due to extended supply chains and climate change in food industry. Nanomaterial-based assays are popular and have recently been developed to ensure food safety and high quality. This review discusses strategies for using nanomaterials in colorimetric biosensors. Localized surface plasmon resonance (LSPR) biosensors are commonly utilized for colorimetric biosensing. Several emerging technologies aimed at simple and rapid immunoassays for onsite applications have been introduced in the food industry. In the foreseeable future, field-friendly colorimetric biosensors could be adopted in food monitoring systems. The onsite and real-time detection of possible contaminants and biological substances in food and water is essential to ensure human health safety.

Air quality is one of the most concerning problems in major industrialized cities in the world. Prediction of future air quality is highly relevant to public health. In some big cities, multiple air quality measurement stations are deployed at different locations to monitor air pollutants, such as NO2, CO, PM 2.5 and PM 10, over time. At every monitoring time stamp t, we observe one station×feature matrix xt of the pollutant data, which represents a spatio–temporal process. Traditional methods on prediction of air quality typically use data from one station or can only predict a single pollutant (such as PM 2.5) at a time, which ignores the spatial correlation among different stations. Moreover, the air pollution data are typically highly nonstationary, We propose a de-trending graph convolutional LSTM (long short term memory) to continuously predict the whole station×feature matrix in the next 1 to 48 hours, which not only captures the spatial dependency among multiple stations by replacing an inner product with convolution, but also incorporates the de-trending signals (transform a nonstationary process to a stationary one by differencing the data) into our model. Experiments on the air quality data of the city Chengdu and multiple major cities in China demonstrate the feasibility of our method and show promising results.

Background: Micronutrient deficiencies are common at the time of cancer diagnosis and are associated with worse prognosis. Little is known about them in cancer rehabilitation. Methods: Data from routine health related quality of life (HRQOL) were analyzed at an inpatient cancer rehabilitation center. Rehabilitation patients completed the EORTC QLQ-C30 questionnaire before and after multidisciplinary rehabilitation treatment, and three month after discharge. Selenium and zinc status was measured in whole blood at these three time points. In case of selenium deficiency up to 600 µg selenium per day as sodium selenite was supplemented. Results: A total of 271 patients (breast, colon, and pancreatic cancer) were included in the analysis. There was clinically meaningful improvement in many domains of the EORTC QLQ-C30 during rehabilitation. However, effect often waned in the three months after. Prevalence for selenium deficiency varied between 34 to 90 percent depending on cancer type (breast &lt; colon &lt; pancreas). In contrast, zinc deficiency was rare. Daily selenium supplementation of 600 µg was more efficient to correct selenium deficiency compared to 300 µg selenium per day. Rehabilitation and increasing selenium status after rehabilitation were associated with improved global quality of life, physical and emotional functioning, and fatigue. In cancer patients with decreasing selenium status, values of global quality of life, physical and emotional functioning, and fatigue were back to the values at the beginning of rehabilitation. Conclusions: Selenium deficiency is common in cancer patients admitted to a cancer rehabilitation clinic. Selenium supplementation during rehabilitation effectively corrected selenium deficiency in most cases. The positive effects of rehabilitation persisted longer, when selenium status did not decrease after rehabilitation.

The proliferation of physiological sensors opens new opportunities to explore interactions, conduct experiments and evaluate the user experience with continuous monitoring of bodily functions. Commercial devices, however, can be costly or limit access to raw waveform data, while low-cost sensors are efforts-intensive to setup. To address these challenges, we introduce PhysioKit, an open-source, low-cost physiological computing toolkit. PhysioKit consists of (i) a sensor and hardware layer that can be configured in a modular manner per research needs, (ii) a software application layer that enables data acquisition, real-time visualization and machine learning (ML)-enabled signal quality assessment. This also supports basic visual biofeedback configurations and synchronized acquisition for co-located or remote multi-user settings. In a validation study for photo-plethysmography (PPG) sensor with 15 participants, PhysioKit shows strong agreement with research-grade PPG sensors. Furthermore, we report usability survey results from 10 micro-project teams (44 individual members in total) who use PhysioKit for 4-6 weeks, providing insights into its use cases and research benefits. We conclude by discussing extensibility and potential impact of the toolkit on the research community.

The deployment of a manufacturing execution system (MES) holds promising potential in facilitating the accumulation of a substantial amount of inspection data. Low quality levels in discrete manufacturing environments are the result of multi-factor coupling and failure to find quality issues in a timely manner within manufacturing settings may trigger the propagation of defects downstream. Currently, most of the inspection quality methods are direct measurement followed by manual judgment. The integration of deep learning methods provides a feasible way to identify defects in a timely manner, thus improving the acceptance rate of factories. This paper focuses on the design of a data-driven quality prediction and control model around discrete manufacturing characteristics, and use fuzzy theory to evaluate the quality level of production stages. Building Multivariate Long and short-term memory learning hidden quality representations to extract predictions from multi-level inspection data in manufacturing systems. Finally, by validating the data of actual produced water dispensers according to three evaluation indexes, RMSE, MAE, MAPE, the results show that Multivariate Long and short-term memory has better prediction performance.

The use of visual signals in horticulture has attracted significant attention and encompassed a wide range of data types such as 2D images, videos, hyperspectral images, and 3D point clouds. These visual signals have proven to be valuable in developing cutting-edge computer vision systems for various applications in horticulture, enabling plant growth monitoring, pest and disease detection, quality and yield estimation, and automated harvesting. However, unlike other sectors, developing deep learning computer vision systems for horticulture encounters unique challenges due to the limited availability of high-quality training and evaluation datasets necessary for deep learning models. This paper investigates the current status of vision systems and available data in order to identify the high-quality data requirements specific to horticultural applications. We analyse the impact of the quality of visual signals on the information content and features that can be extracted from these signals. To address the identified data quality requirements, we explore the usage of a deep learning-based super-resolution model for generative quality enhancement of visual signals. Furthermore, we discuss how these can be applied to meet the growing requirements around data quality for learning-based vision systems. We also present a detailed analysis of the competitive quality generated by the proposed solution compared to cost-intensive hardware-based alternatives. This work aims to guide the development of efficient computer vision models in horticulture by overcoming existing data challenges and paving a pathway forward for contemporary data acquisition.

Growth-preserving instrumentation techniques are utilized in early-onset scoliosis (EOS) cases requiring surgical intervention. Shilla technique corrects the deformity and may reduce the need for surgical treatment with its growth-directing effect. As with other techniques, various prob-lems can be encountered following the administration of the Shilla technique. The aim of this study was to examine the effect of complications encountered with Shilla treatment on correction and growth. Sixteen patients with a follow-up period of at least 1 year who received Shilla growth guidance for EOS were included in the study. No complications occurred in 50% cases and no unplanned surgery was required. Of the remaining 8 patients with postoperative im-plant-related complications (50%), 6 (37.5%) required unplanned surgery; this consequently caused implant failure in the proximal region in 5 cases (31.25%) and deep tissue infection around the implant in 1 case (6.25%). Deformity correction, spine length, and quality-of-life scores significantly improved in EOS through Shilla growth guidance. Although implant-related com-plications were observed and related unplanned surgeries were required with Shilla growth guidance in our patients, these complications did not have a significant negative effect on correc-tion and spine growth.

Japan is experiencing a super-aging society faster than is anywhere else worldwide. Consequently, extending healthy life expectancy is an urgent social issue. To understand diet that supports the extension of healthy life expectancy, we studied the relationships among quality of life (QOL: SF-36 questionnaire), physical activity (number of steps and activity calculated using an accelerometer), physical function (muscle strength, movement function, agility, static balance, dynamic balance, and walking function) and dietary intake among 469 older adults living in the Tokyo metropolitan area (65–75 years old, men/women = 166/303) from February 23, 2017, to March 31, 2018. There was a significant positive association between physical QOL and steps, moderate-intensity activity, and high-intensity activity (p &lt; 0.05), and a significant positive association (p &lt; 0.05) between physical activity and movement, static balance, and walking functions, but no association with muscle strength. These three body functions were significantly positively correlated with intake of vegetables, seeds, fruits, and milk, and with magnesium, potassium, vitamin B6, and the dietary fibre/carbohydrate ratio and composition ratios (p &lt; 0.05). Balancing food and nutrition may improve QOL in older adults through increased physical function and physical activity. Future verification of interventions is needed.

This paper directly addresses a long-standing issue that affects the development of many complex distributed software systems: how to establish quickly, cheaply, and reliably whether they can deliver their intended performance before expending significant time, effort and money on detailed design and implementation. We describe ∆QSD, a novel metrics-based and quality-centric paradigm that uses formalised outcome diagrams to explore the performance consequences of design decisions, as a performance blueprint of the system. The distinctive feature of outcome diagrams is that they capture the essential observational properties of the system, independent of the details of system structure and behaviour. The ∆QSD paradigm derives bounds on performance expressed as probability distributions encompassing all possible executions of the system. The ∆QSD paradigm is both effective and generic: it allows values from various sources to be combined in a rigorous way, so that approximate results can be obtained quickly and subsequently refined. ∆QSD has been successfully used by Predictable Network Solutions for consultancy on large-scale applications in a number of industries, including telecommunications, avionics, and space and defence, resulting in cumulative savings worth billions of US dollars. The paper outlines the ∆QSD paradigm, describes its formal underpinnings, and illustrates its use via a topical real-world example taken from the blockchain/cryptocurrency domain. ∆QSD has enabled challenging throughput targets to be met for a globally distributed blockchain operating on the public internet.

Application of exogenous jasmonate can stimulate the production of ethylene, carotenoids and aroma compounds, resulting in the acceleration of fruit ripening. These alterations improve fruit quality and make fruit desirable for human consumption, but overripening of a fruit results in large losses of fruit crops. In order to overcome this problem, 1-methylcyclopropene was ap-plied to the fruits due to its capacity to block the receptors of ethylene, resulting in the sup-pressed of fruit ripening. In this study, treatments only with 1-methylcyclopropene, and with both 1-methylcyclopropene and methyl jasmonate was conducted to observe if an exogenous methyl jasmonate can improve the levels of metabolites in their fruits with ethylene receptors blocked. Fruits were analyzed at 4, 10 and 21 day after harvest (DAH) and compared with the no treated fruits. The postharvest treatments affected primary metabolites (sugars, organic acids, amino acids and fatty acids) and secondary metabolites (carotenoids, tocopherols and phytoster-ols). However, the lipid metabolism of the tomato was the most impacted by the exogenous jasmonate. Fatty acids, carotenoids, tocopherols and phytosterols showed a delay in their pro-duction at 4 and 10 DAH. In contrast, at 21 DAH these non-polar metabolites exhibited an im-portant improvement in their accumulation.

Adolescents’ daily life has dramatically changed during the COVID-19 era due to the social restrictions that have been imposed, including closures of schools, leisure centers and sport facilities. The purpose of this study was to examine levels of well-being and mood and their relations with physical (in)-activity and eating behaviors in adolescents during a lockdown period in Greece. A total of 950 adolescents (Mean Age = 14.41years ± 1.63) participated in a web-based survey while education was online and organized sport activities were interrupted. Participants showed poor well-being, insufficient physical activity levels and moderate scores of healthy eating behavior. Hierarchical regression analysis showed that, after controlling for the effect of gender and body mass index, increased physical activity and healthier eating behavior predicted better well-being, whereas sedentariness predicted worse well-being. Furthermore, it was revealed that days of physical activity per week was a stronger predictor of well-being than minutes of physical activity per week, and that both in-house and out-of-house physical activity were beneficial. Considering that well-being was below the threshold recommended by the WHO as indicative of possible depressive symptoms, measures to increase physical activity and improve eating behavior should become a priority for communities and policy makers.

The ongoing COVID-19 global pandemic is affecting every facet of human lives (e.g., public health, education, economy, transportation, and the environment). This novel pandemic and citywide implemented lockdown measures are affecting virus transmission, people’s travel patterns, and air quality. Many studies have been conducted to predict the COVID-19 diffusion, assess the impacts of the pandemic on human mobility and air quality, and assess the impacts of lockdown measures on viral spread with a range of Machine Learning (ML) techniques. This review study aims to analyze results from past research to understand the interactions among the COVID-19 pandemic, lockdown measures, human mobility, and air quality. The critical review of prior studies indicates that urban form, people's socioeconomic and physical conditions, social cohesion, and social distancing measures significantly affect human mobility and COVID-19 transmission. During the COVID-19 pandemic, many people are inclined to use private transportation for necessary travel purposes to mitigate coronavirus-related health problems. This review study also noticed that COVID-19 related lockdown measures significantly improve air quality by reducing the concentration of air pollutants, which in turn improves the COVID-19 situation by reducing respiratory-related sickness and deaths of the people. It is argued that ML is a powerful, effective, and robust analytic paradigm to handle complex and wicked problems such as a global pandemic. This study also discusses policy implications, which will be helpful for policymakers to take prompt actions to moderate the severity of the pandemic and improve urban environments by adopting data-driven analytic methods.

The 2019-2020 summer wildfire event on the east coast of Australia was a series of major wildfires occurring from November 2019 to end of January 2020 across the states of Queensland, New South Wales (NSW), Victoria and South Australia. The wildfires were unprecedent in scope and the extensive extend of the wildfires has caused smoke pollutants transported not only to New Zealand but across the Pacific Ocean to South America. At the height of the wildfires, smoke plumes were injected into the stratosphere at height up to 25km and hence transported across the globe. Based on meteorological and air quality simulation using WRF-Chem model, air quality monitoring data collected during the bushfire period and remote sensing data from MODIS and CALIPSO satellites, the extend of the wildfires and the pollutant transport, and their impacts on air quality and health on exposed population in NSW can be analysed. The results showed that WRF-Chem model using Fire Emission Inventory from NCAR (FINN) predicts the dispersion and transport of pollutants and the predicted concentration of PM2.5 and other pollutants from wildfires reasonably well when compared with ground-based and satellite data. The impact on health endpoints such as mortality, respiratory and cardiovascular diseases hospitalisation across the modelling domain is then estimated. The estimated health impact is comparable with previous study based only on observation data, but the results in this study provide much more detailed spatially and temporally with regards to the health impact from the 2019-2020 wildfire.

This is an article or technical note which is intended to provides an insight journey of Machine Learning Systems (MLS) testing, its evolution, current paradigm and future work. Machine Learning Models, used in critical applications such as healthcare industry[1], Automobile [2], [3] and Air Traffic control, Share Trading etc., and failure of ML Model can lead to severe consequences in terms of loss of life or property. To remediate this, developers, scientists, and ML community around the world, must build a highly reliable test architecture for critical ML application. At the very foundation layer, any test model must satisfy the core testing attributes such as test properties and its components. This attribute comes from the software engineering [5], [6], but the same cannot be applied in as-is form to the ML testing and we will tell you “why”.

Citizen science has the potential to support the delivery of the United Nations Sustainable Development Goals (SDGs) through its integration into national monitoring schemes. In this study, we explore the opportunities and biases of citizen science (CS) data when used either as a primary or secondary source for SDG 6.3.2 reporting. We use data from waterbodies that have both CS and regulatory monitoring in England and Zambia to explore their biases and complementarity. A comparative analysis of regulatory and CS data provided key information on appropriate sampling frequency, site selection and measurement parameters, necessary for more robust SDG reporting. The results show elevated agreement for pass/fail ratios and indicator scores for English waterbodies (80%) and demonstrate CS data can improve granularity and spatial coverage for SDG indicator scoring, even when extensive statutory monitoring programmes are present. In Zambia, management authorities are actively using citizen science projects to increase spatial and temporal coverage for SDG reporting. Our results indicate that design considerations for SDG focused citizen science can address local needs as well as provide a more representative indicator of the state of a nation’s freshwater ecosystems for international reporting requirements.

Stakeholder input into the decision-making process when developing public health programs and policies is crucial. This article presents an innovative approach, involving online participation with a wide group of stakeholders located in different geographic locations, for policy consensus by research methodology. The results of the project have been used to propose assumptions regarding a strategy for preventing blood-borne diseases in Poland. The research was conducted iteratively using a multi-stage qualitative methodology to explore risk assessment involving blood-borne infections. The final output of the entire project is a list of key problems/challenges and solutions associated with medical and nonmedical services that are connected to the breakage of tissue continuity. Qualitative research is rare in risk assessment as priority is usually given to statistical data and end-points (quantitative studies ). Statistical data on health risk allows to assess the health implications, while the methodology applied also allowed diagnosis of the processes leading to these effects. In addition to policy preparation for blood-borne illnesses, the methodology employed in the study can also be used to successfully explore other areas of public health policy decisions.

The move from paper to online is not only necessary for remote working, it is also significantly more sustainable. This trend has seen a rising need for high-quality digitization of content from pages and whiteboards to sharable online material. But capturing this information is not always easy, nor are the results always satisfactory. Available scanning apps vary in their usability and do not always produce clean results, retaining surface imperfections from the page or whiteboard in their output images. CleanPage, a novel smartphone-based document and whiteboard scanning system, is presented. CleanPage requires one button-tap to capture, identify, crop and clean an image of a page or whiteboard. Unlike equivalent systems, no user intervention is required during processing and the result is a high-contrast, low-noise image with a clean homogenous background. Results are presented for a selection of scenarios showing the versatility of the design. CleanPage is compared with two market leader scanning apps using two testing approaches: real paper scans and ground-truth comparisons. These comparisons are achieved by a new testing methodology that allows scans to be compared to unscanned counterparts, by using synthesized images. Real paper scans are tested using image quality measures. An evaluation of standard image quality assessments is included in this work and a novel quality measure for scanned images is proposed and validated. The user experience for each scanning app is assessed, showing CleanPage to be fast and easier to use.

Recent advancements in web-based geospatial software and smartphone technology have popularized the process of voluntary production and sharing of geospatial data by individual citizens. Through such Volunteered Geographic Information (VGI) activities, people across the world participate in online mapping projects (such as OpenStreetMap) to insert their spatial information. The quality of data generated by such VGI activities has profound impacts on online mapping projects and their spatial database. In this study, we examine the VGI contribution pattern in OpenStreetMap through three case study neighborhoods located in three major cities: Tehran, London, and Los Angeles, and investigate how it might affect the process of quality assessment of VGI.

Safety of source water streams is an urgent environmental issue, while protections in monsoon controlled subtropical regions face difficulties because of the lack of small scaled observation and analysis in small source water catchments. Basing on continuous weekly water quality data (2014-2017) in Pingqiao River Catchment, the annual average values of TN, NO₃, NH₄ and TP are 3.36, 1.64, 0.28 and 0.02 (mg/L) respectively. During dry, normal and wet seasons, the variability of parameters is over 35%, which indicates an obvious seasonality. Multiple methods are combined in order to assess the water quality and find the driving factors during dry, normal and wet seasons. This study suggests precipitation and fertilization are the mainly seasonal factors, which can make water quality better in wet season than dry season due to the dilution effect. The mechanism between seasonality and compound of nutrients can also be traced by log(TN:TP), and log(NO₃:NH₄). Among six main land use types (forest, tea plantation, cropland (paddy), urban, bare soil and water), the former three ones are influential mostly during dry and wet season. Tea plantation has the largest nutrients discharge amount per area, which is similar to cropland in dry season. By contrary, forest has the double power in reducing nitrogen release in wet and normal seasons. When transformed into paddies, croplands can lower the phosphorus concentration. Conclusions of this study can be used in southeastern China and similar regions on source water protection and agricultural plans.

Riparian restoration is an important objective for landscape managers seeking to redress the widespread degradation of riparian areas and the ecosystem services they provide. This study investigated the long-term outcomes of ‘one-off’ restoration activities undertaken in the Upper Murrumbidgee Catchment, NSW, Australia. The objective of the restoration was to protect and enhance riparian vegetation and control erosion, and consequently reduce sediment and nutrient delivery into the Murrumbidgee River. To evaluate the outcomes 10 years after restoration, rapid riparian vegetation and geomorphological assessments were undertaken at 29 sites spanning the four different restoration methods used (at least five replicates per treatment), as well as at nine comparable untreated sites. We also trialed the use of aerial imagery to compare width of riparian canopy vegetation and projective foliage cover prior to restoration with that observed after 10 years. Aerial imagery demonstrated the width of riparian canopy vegetation and projective foliage cover increased in all restored sites, especially those with native plantings. The rapid assessment process indicated that 10 years after riparian restoration, the riparian vegetation was in a better condition at treated sites compared to untreated sites. Width of riparian canopy vegetation, native mid-storey cover, native canopy cover and seedling recruitment were significantly greater in treated sites compared to untreated sites. Geomorphological condition of treated sites was significantly better than untreated sites, demonstrating the importance of livestock exclusion to improve bank and channel condition. Our findings illustrate the value of ‘one-off’ restoration activities in achieving long-term benefits for riparian health. We have demonstrated that rapid assessments of the vegetation and geomorphological condition can be undertaken post-hoc to determine the long-term outcomes, especially when supported with analysis of historical aerial imagery.

Sensory evaluation has been widely applied in assessing the quality of many consumer products that directly serve human needs such as food, beverages, clothing, etc. This paper first examined the inherent deficiencies in this approach, due mainly to the essentially subjective nature of human sensory preference. It then argued that instinctively designating certain materials attributes as sensory perceptions is unnecessary; considering every scientific concept is in essence the processed results of our sensory organs/brains, i.e., all quantities were initially human perceptions. Scientific advances have inevitably generated gradual transformation of such human perceptions as warmth and heaviness into objective parameters measurable in physical quantities like temperature and kilograms. Then using existing successful examples, it demonstrated firmly how the sensory attributes can be assessed by more reliable instrumental methods, and envisioned the key steps to turning a perception into scientifically measurable parameter(s).

Abstract: The contribution of breakfast to diet quality (DQ) can inform future dietary guidelines. This study examined breakfasts that were associated with highest-quality diets. Dietary data came from the first reported day of the National Health and Examination Survey (NHANES) 2011-2014 (n=14,488). DQ measures were the Nutrient Rich Foods Index (NRF9.3) and the USDA Healthy Eating Index 2015 (HEI 2015). Analyses of breakfast intakes were conducted by NRF9.3 tertiles and by age and socioeconomic groups. Four out of 5 NHANES participants ate breakfast. Breakfast provided 19-22% of dietary energy depending on age. Breakfast intakes of complex carbohydrates and total sugars were higher and intakes of protein and fats were lower relative to energy intakes. Breakfast provided more that 20% of daily intakes of B vitamins, vitamins A and D, folate, calcium, iron, potassium and magnesium. Eating breakfast was associated with higher NRF9.3d scores. Breakfasts associated with top tertile of NRF9.3d had more carbohydrates and less added sugars and fats. Such breakfasts had more fruit and juices, more whole grains, more milk and yogurt and less meat and eggs. Breakfast patterns that favored fruit, whole grains, and dairy were associated with healthiest diets.

Air pollution is a leading cause of death worldwide, and has a profound impact on the planet's climate and ecosystems. A substantial portion of air pollution is attributable to Ocean Going Vessels (OGVs). In light of this, international regulations have been put in place to mitigate air pollutant emissions from OGVs. While studies have indicated that these regulations can create significant health, environmental, and economic benefits, there remains a research gap regarding their specific impact on enhancing air quality. The aim of this study is to investigate how the implemented regulations have affected air quality in the Southern North Sea. The study found that the international regulations on ship emissions have successfully led to a decline in SO2 emissions from OGVs in the Southern North Sea, which resulted in a reduction of ambient SO2 concentrations inland, leading to positive effects on public health and the environment. However, it was projected that their proportion is tend to increase in the following years. Moreover, the study revealed that Exhaust Gas Cleaning Systems (EGCS) present significant concerns. They were significantly more frequently found to be non-compliant, and more alarmingly, they emit notably higher average levels of SO2. It also turned out that international regulations in the southern North Sea have less effect on the reduction of NOx emissions from OGVs than expected. The NOx emissions from OGVs will even account for an alarming 40% of the total domestic NOx emissions for the Belgian Region by 2030.

Strip-mined land (SML) disturbed by coal-mining is the non-crop land resource that can be utilized to cultivate high-yielding energy crops such as miscanthus for bioenergy applications. However, the biomass yield potential, annual availability and environmental impacts on growing energy crops in SML are less understood. In this study, we estimated the yield potential of miscanthus (Miscanthus sinensis) in SML and its environmental impacts on local streams using the Soil and Water Assessment Tool (SWAT). After calibration and validation of the SWAT model, the results demonstrated that miscanthus yield potentials were 2.6 (0.8−5.53), 10.0 (1.3−16.0) and 16.0 (1.34−26.0) Mg ha^-1 with the fertilizer application rate of 0, 100, and 200 kg-N ha^-1 respectively. Furthermore, cultivation of miscanthus in the SML has the potential to reduce sediment (~20%) and nitrate (2.5%−10.0 %) loads reaching to water streams with a marginal increase in phosphorus load. The available SML in the United States could produce about 10 to 16 dry Tg of biomass per year without negatively impacting the water quality. In conclusion, SML can provide a unique opportunity to produce biomass for bioenergy applications, while improving stream water quality in highly dense mining area (the Appalachian region) in the United States.

Background: Carers (or care partners) of adults in LTC contribute substantially to the health and well-being of their loved ones by providing physical care, emotional support, and companionship. Despite their critical role, little is known about how caregivers have been impacted by the pandemic. The purpose of this study was to explore the lived experiences of caregivers of people living in long-term care (LTC) homes during the initial phases of the COVID-19 pandemic and potential supports and resources needed to improve caregivers’ quality of life.Design: An interpretive descriptive approach that incorporated photovoice method was used. Methods: Using purposive sampling strategy, six family carers in Ontario, Canada were recruited between September and December 2021. Over a four-week period, caregivers took pictures depicting their experience of the pandemic that were shared in a virtual focus group. Visual and text data were analyzed using thematic analysis with an inductive approach.Findings: Caregivers expressed feelings of frustration, confusion, and joy. Emerging themes included: (i) feeling like a “criminal” amidst visitor restrictions and rules; (ii) experiencing uncertainty and disappointment in the quality of care of long-term care homes; (iii) going through burnout; and (iv) focusing on small joys and cherished memories.Conclusions: The combination of visual and textual methods provided unique insight into the mental distress, isolation, and intense emotional burdens experienced by caregivers during the pandemic. Impact: Our findings underscore the need for LTC organizations to work in unison with caregivers to optimize the care of residents and support mental health of caregivers.

It is unclear which noise exposure time window and noise characteristics during nighttime are most detrimental for sleep quality in real life settings. We have conducted a field study with 105 volunteers wearing a wrist actimeter to record their sleep during seven days, together with concurrent outdoor noise measurements at their bedroom window. Actimetry recorded sleep latency increased by 5.6 minutes (95% confidence interval: 1.6 to 9.6 minutes) per 10 dB(A) increase in noise exposure during the first hour after bedtime. Actimetry assessed sleep efficiency was significantly reduced by 2-3 percent per 10 dB(A) increase in measured outdoor noise (Leq, 1h) for the last three hours of sleep. For subjectively reported sleepiness, noise exposure during the last hour prior to wake up was most crucial with an increase in the sleepiness score of 0.31 units (95% CI: 0.08 to 0.54) per 10 dB(A) Leq,1h. Associations for estimated indoor noise were not more pronounced than for outdoor noise. Considering noise events in addition to equivalent sound pressure levels (Leq) only marginally improved the statistical models. Our study provides evidence that matching the nighttime noise exposure time window to the individual’s diurnal sleep-wake pattern results in a better estimate of detrimental nighttime noise effects on sleep. We found that noise exposure at the beginning and the end of the sleep is most crucial for sleep quality.

The electronics industry is a significant contributor to environmental challenges, generating approximately 50 million tons of electronic waste annually and high levels of carbon dioxide emissions throughout the production and disposal of devices. This paper investigates the interplay between reliability and sustainability by analyzing how degraded components affect the environmental footprint of electronic products. Using a board with 215 components as a baseline, we calculate the mean time between failures (MTBF) and compare it to scenarios involving degraded components. Our findings demonstrate that degraded components can reduce MTBF by up to 50%, resulting in higher failure rates, increased electronic waste, and up to 30% more CO2 emissions due to shortened product lifespans. This study underscores the crucial importance of component quality control in the production process to improve both reliability and sustainability. Additionally, the broader economic and environmental impacts of using unchecked components are highlighted, showing their contribution to elevated failure rates, shortened product lifespans, and an estimated 20% increase in e-waste. By adopting a 100% inspection protocol, leveraging advanced technologies, and enforcing stringent material quality controls, manufacturers can significantly enhance the reliability of electronic products while reducing their environmental impact, thus fostering a more sustainable electronics industry.

Probiotics in cosmetics is a new and burgeoning area of research attracting attention from cosmetic manufacturers and customers looking for natural or additional alternatives in their skincare regimens. Probiotics not only promote beneficial microbiomes to improve skin health but can also modulate the visual, topographical, and mechanical attributes to improve skin quality. This study was conducted in healthy adults to determine the effect of a topical serum formulation containing the live probiotic Micrococcus luteus Q24 on several key cosmetic skin quality parameters and its beneficial impact on the modulation of the skin microbiome. Quantitative changes in various skin parameters were measured using a skin analyzer device and skin swabs were analysed using whole genome sequencing to monitor microbial diversity and levels of probiotic colonisation. Compared to the baseline, a significant reduction in the pore, spots, wrinkles, and impurities scores; and an increase of 101% in the hydration scores were observed. Additionally, 45-80% of participants showed a decrease in pores, spots, wrinkles, and impurities and 90% of participants showed an increase in hydration after 25 days of probiotic serum application. The WGS analysis of the skin swab samples showed a significant increase in the relative abundance of M. luteus Q24. The results from this study indicated that topical application of serum-containing probiotic M. luteus Q24 offers the benefit of improving skin health quality.

The slate aggregate has long been perceived as a substandard, low quality waste material with its physical and chemical properties not being competitive with those of the primary aggregates. It is assumed that the slate aggregate particles are not strong, that is not durable and will not compact. This research aims to address those claims and review the available literature on the performance of the slate aggregate. The review inaugurates by analysing the physical, chemical and mechanical properties of slate, before expanding into a literature review of laboratory testing’s on the effect of moisture content on density, compaction and layer thickness of slate aggregate.The paper reviews case studies of construction projects in North Wales, where the slate aggregate has been used for general fill and road building for many years. Some of the case studies include the A55 coastal road and duelling of the A5 in Anglesey (WRAP, 2004), where slate aggregate was successfully used as sub-base. The paper also investigates why many civil engineers are reluctant to use the slate aggregate and regard the material as sub-standard, flaky aggregate. The research paper reviews the potential usages and various products the slate aggregate is suitable for and satisfies the requested standards. The final topic reviewed is the cost of transporting slate aggregate compared with the cost of transport for primary aggregate and the introduction of the Primary Aggregates Tax (Parliament of the United Kingdom, 2011). The last topic includes a critical analyses of the claims that the slate aggregate a commercially viable construction material despite its remote location (Woodward et al, 2004). The transportation cost and the supply chain complexities must be evaluated prior to considering the long-term sustainability of the product (Radanliev et al^1-6, 2014, 2015, 2016).

This paper proposes a methodology for the development and its Verification and Validation(V&amp;V) of safety-rated software. The development methodology is based on the structured analysis and structured design methodology, which has been proven in the field of safety software development during long period. The suggested the development and the V&amp;V methodology additionally focuses on the quality attributes 3C+T (completeness, Correctness, Consistency and traceability), which are important criteria in IEC international standards. The software development life cycle is compiled from IEC international standardization, which are of the requirements analysis phase, design phase, implementation phase, testing phase, installation/commissioning phase, and operation &amp; maintenance phases. The activities of the development process method were defined from requirements analysis to implementation, and the activities of the verification and validation were defined to include the scope of the developer's activities and then to include the test phase, installation/commissioning phase, and operation phases additionally. In other words, testing phase performed by the developer was defined as informal testing, and testing performed by the verifier according to test criteria, test plans, and test procedures was defined as formal testing. According to proposed methodology, the requirements phase defines the sequence of Entity Relationship Diagram (ERD)-Context Diagram-Data Flow Diagram (DFD), functional decomposition process and defines operational scenario. In the design phase, module design such as task analysis and task allocation were defined. In the implementation phase, we listed the coding guidelines that must be followed for safety-related system. The test phase defined the test criteria, test plan, test procedure, and test result report activities. In the installation/commissioning and operation phases, recommendations for improving reliability, quality, and safety were proposed for deliverables such as user documentation and technical documentation.

Tea infusions are the most consumed beverages in the world after water, their pleasant yet peculiar flavor profile drives consumer choice and acceptance and becomes a fundamental benchmark for industry. Any qualification method capable of objectifying the product's sensory features effectively supports industrial quality control laboratories guaranteeing high sample throughputs even without the human panel intervention. The current study presents an integrated analytical strategy acting as an Artificial Intelligence decision tool for black tea infusion aroma and taste blueprinting. Key markers validated by sensomics are accurately quantified in a wide dynamic range of concentrations. Thirteen key aromas are quantitatively assessed by standard addition with in-solution solid-phase microextraction sampling followed by GC-MS. On the other hand, nineteen key taste and quality markers are quantified by external standard calibration and LV-UV/DAD. The large dynamic range of concentration for sensory markers is reflected in the selection of seven high-quality teas from different geographical areas (Ceylon, Darjeeling Testa Valley and Castleton, Assam, Yunnan, Azores, and Kenya). The strategy acts as an AI smelling and taste machine predicting teas sensory features without the human panel intervention.

Abstract: The internationally accepted goals of eliminating climate gas emissions implies substantial investments in renewable energy (RE) facilities. This will inevitably lead to major impacts on landscapes. Landscape concerns linked to RE facilities are already leading to controversies in many local communities. In this article, we focus on the question of landscape democracy related to the establishment of RE facilities. Based on recommendations from the European Landscape Convention, an analytical framework is presented identifying three main dimensions of landscape democracy, followed by an overview of arrangements, procedures and methods that are or may be used to encourage democracy. The procedures and methods are analysed based on examples from Denmark and Norway. This is followed by an analysis of decision levels with a special focus on the principle of subsidiarity. Finally, recommendations are presented to strengthen landscape democracy in relation to the installation of RE-facilities.

Depending on the characteristics of the industrial area, toxicity evaluation of human body, risk assessment and health impact assessment may directly cause cancer due to air pollution. Environmental data collection is from August 2018 to January 31, 2019, and the average, minimum, and maximum values of air pollution data respectively. According to the global data on global trends using the Big Data, high blood pressure is confirmed at 33rd place in the world, and myocardial infarction among the environmental diseases is confirmed to be lower than Korea. Disease that occurred in Jeolla province industrial complex considering the characteristics of our country was identified as representative. Air pollutants are considered to be the causes of allergic diseases in Korea. PM10 was found to be higher than the control area (28.8804348 (㎍ / ㎥), 31.7065217 (㎍ / ㎥) and 32.8532609 (㎍ / ㎥). The mean concentrations of PM2.5 in the middle and high exposure areas were lower than those of the control areas, but the highest in the intermediate exposure areas was 16.5978261 (㎍ / ㎥), 16.1086957 (㎍ / ㎥) and 17.1847826 (㎍ / ㎥) respectively. The relationship between the major variables of environmental exposure in Yeosu was confirmed to be correlated with high blood pressure, chronic obstructive pulmonary disease (COPD), bronchitis, cerebrovascular, diabetes, thyroid disease, sinus infection, anemia and pneumonia.

In this paper, we present the results of the research concerning extraction of informative gene expression profiles from high-dimensional array of gene expressions considering the state of patients' health using clustering method, ensemble of binary classifiers and fuzzy inference system. Applying of the proposed stepwise procedure can allow us to extract the most informative genes taking into account both the subtypes of disease or state of the patient's health for further reconstruction of gene regulatory networks based on the allocated genes and following simulation of the reconstructed models. We used the publicly available gene expressions data as the experimental ones which were obtained using DNA microarray experiments and contained two types of patients' gene expression profiles: the patients with lung cancer tumor and healthy patients. The stepwise procedure of the data processing assumes the following steps: in beginning, we reduce the number of genes by removing non-informative genes in terms of statistical criteria and Shannon entropy; then, we perform the stepwise hierarchical clustering of gene expression profiles at hierarchical levels from 1 to 10 using SOTA clustering algorithm with correlation distance metric. The quality of the obtained clustering was evaluated using complex clustering quality criterion which is considered both the gene expression profiles distribution relative to center of the clusters were these gene expression profiles are allocated and the centers of the clusters distribution. The result of this stage execution was selection of the optimal cluster at each of the hierarchical levels which corresponded to minimum value of the quality criterion. At the next step, we have implemented classification procedure of the examined objects using four well known binary classifiers: logistic regression, support-vector machine, decision trees and random forest classifier. The effectiveness of the appropriate technique was evaluated based on the use of ROC analysis using criteria included as the components the errors of both the first and the second kinds. The final decision concerning extraction of the most informative subset of gene expression profiles was taken based on the use of fuzzy inference system, the inputs of which are the results of the appropriate single classifiers operation and output is the final solution concerning state of the patient's health. To our mind, the implementation of the proposed stepwise procedure of the informative gene expression profiles extraction create the conditions for increasing effectiveness of the further procedure of gene regulatory networks reconstruction and the following simulation of the reconstructed models considering the subtypes of the disease and/or state of the patient’s health.

Chronic myeloid leukemia (CML) is a myeloproliferative neoplasm constituting approximately 15% of newly diagnosed leukemia in adult patients. Development of tyrosine kinase inhibitors (TKIs) have dramatically improved outcomes in patients with chronic CML in chronic phase. However, adverse drug events (ADEs) associated with TKI therapy have influenced drug adherence, resulting in adverse clinical outcomes and a decline in the quality of life (QoL). In this study, we carried out a unique questionnaire survey to evaluate ADEs, which comprised 14 adverse events. We compared drug adherence rates between patients using imatinib and those who switched from imatinib to nilotinib, a second-generation TKI. Following the switch, the total number of ADEs decreased considerably in most cases. Simultaneously, better QoL was observed in the nilotinib group than in the imatinib group. Drug adherence was measured using Morisky’s 9-item Medication Adherence Scale (MMAS). MMAS increased significantly after switching to nilotinib in all cases. Drug adherence is a critical factor for achieving molecular response in patients with CML. In fact, our results showed a strong inverse correlation between clinical outcome [international scale (IS)] and adherence (MMAS), with a stronger tendency in the nilotinib group than in the imatinib group. In conclusion, low occurrence of ADEs induced a high level of QoL and a good clinical response with second-generation TKI nilotinib treatment.

We examine how observations can be used to evaluate an air quality analysis by verifying against passive observations (i.e. cross-validation) that are not used to create the analysis and we compare these verifications to those made against the same set of (active) observations that were used to generate the analysis. The results show that both active and passive observations can be used to evaluate of first moment metrics (e.g. bias) but only passive observations are useful to evaluate second moment metrics such as variance of observed-minus-analysis and correlation between observations and analysis. We derive a set of diagnostics based on passive observation–minus-analysis residuals and we show that the true analysis error variance can be estimated, without relying on any statistical optimality assumption. This diagnostic is used to obtain near optimal analyses that are then used to evaluate the analysis error using several different methods. We compare the estimates according to the method of Hollingsworth Lonnberg, Desroziers, a diagnostic we introduce, and the perceived analysis error computed from the analysis scheme, to conclude that as long as the analysis is optimal, all estimates agrees within a certain error margin. The analysis error variance at passive observation sites is also obtained.

Nanopore raw read accuracy has improved to over 99%, making it a potential tool for metabarcoding. For broad adoption, guidelines on quality filtering are needed to ensure reliable taxonomic unit recovery. This study aims to provide those guidelines for a fungal metabarcoding context and to apply them to a case-study of ectomycorrhizae in decaying bark of Fagus sylvatica.We introduce the eNano pipeline to test two standard metabarcoding approaches: (1) reference-based mapping leveraging the UNITE’s species hypothesis system (SH-approach) and (2) constructing 98% OTUs (OTU-approach). We evaluate these approaches using a mock and natural community. Our results demonstrate that both approaches are effective with Nanopore data. When using a reference database, we recommend strict mapping criteria rather than Phred-based filtering. For 98% OTUs, filtering reads at ≥Q25 is recommended. Our case-study reveals that the decay gradient is a primary determinant of community composition, and that specific mycorrhizal fungi colonize decaying bark. Complementing our metabarcoding results with root tip morphotypification, we identify Laccaria amethystina and Tomentella sublilacina as key ectomycorrhizae of saplings on decaying logs. These findings demonstrate that Nanopore sequencing can provide valuable ecological insights and support its broader use in fungal metabarcoding as read quality continues to improve.

Context: In Software Engineering, there must be clarity in communication among interested parts to elicit the requirements aimed at software development through frameworks to achieve the behaviors expected by the software. Problem: Lack of clarity in the requirements elicitation stage can impact subsequent stages of software development. Solution: We proposed a case study to achieve the proposed goal focusing on the performance efficiency characteristic expressed in the ISO/IEC/IEEE 25010 Standard using Behavior-Driven Development (BDD). Method: The case study was performed with professionals who use BDD to elicit the non-functional requirements of a company that develops software. Summary of Results: The results obtained were aspects related to the elicitation of non-functional requirements aimed at the performance efficiency characteristic of the ISO/IEC/IEEE 25010 Standard using BDD through the point of view of industry professionals. Contributions and impact: The article’s main contribution is to demonstrate the effectiveness of using BDD to elicit non-functional requirements about the performance efficiency characteristic of the ISO/IEC/IEEE 25010 Standard.

This study aims to explore the associations between pediatric adverse events (PAEs) and hospital and patient characteristics within the inpatient hospital setting, focusing solely on the framework of pediatric quality indicators (PDIs) from the Agency for Healthcare Research and Quality (AHRQ). Specifically, the study focuses on NQI 03 Neonatal Blood Stream Infection (NBSI). The analysis utilizes discharge data from the Healthcare Cost and Utilization Project (HCUP) Kids’ Inpatient Databases (KID) for the year 2019. Through this analysis, the study seeks to answer research questions regarding associations between hospital characteristics and patient characteristics with NQI 03. The methodology employs bivariate and multivariate logistic regression models to analyze patient-level encounters of NBSI. The results indicate that smaller, rural, and non-teaching hospitals exhibit significantly lower odds of NQI 03 compared to large hospitals. Various individual factors such as gender, age, race, service lines, payment sources, and major operating room procedures also demonstrate differing levels of significance in relation to NQI 03, warranting further investigation. This study provides contextual expansion on the findings and offers valuable insights into PAEs in the inpatient hospital setting, specifically focusing on NBSI within the PDIs framework. It highlights areas for developing evidence-based interventions and guidelines for clinicians and policymakers. Ultimately, the findings contribute to the growing understanding of factors influencing NBSI and emphasize the importance of targeted strategies for improving pediatric patient safety.

For two-dimensional forward-looking sonar imaging, high sidelobes significantly degrade the quality of sonar images. The cosine window function weighting method is often applied to suppress the sidelobe levels in the angular and range dimensions at the expense of the main lobe resolutions. Therefore, the improved spatially variant apodization imaging method for forward-looking sonar is proposed to reduce the sidelobes without degrading the main lobe resolution in angular-range dimensions. The proposed method is a nonlinear post-processing operation in which the raw complex-valued sonar image produced by a conventional beamformer and matched filter is weighted by a spatially variant coefficient. To enhance the robustness of the spatially variant apodization approach, the array magnitude and phase errors are calibrated to prevent beam sidelobe heightening from occurring prior to beamforming operations. The analyzed results of numerical simulations and a lake experiment demonstrate that the proposed method can greatly reduce the sidelobes to approximately -40 dB, while the main lobe width remains unchanged. Moreover, this method has an extremely simple computational process.

Eutrophication is a major environmental issue with many negative consequences, such as hypoxia and harmful cyanotoxins production. Monitoring coastal eutrophication is a crucial, especially for island countries like the Republic of Cyprus, which are economically dependent on the touristic sector. Additionally, the open-sea aquaculture industry in Cyprus has been exhibiting an increase in the last decades and environmental monitoring to identify possible signs of eutrophication is mandatory according to the legislation. Therefore, in this modelling study, two different types of Artificial Neural Networks (ANNs) are developed based on in situ-data collected from stations located in the coastal waters of Cyprus. Theses ANNs aim to model the eutrophication phenomenon based on two different data-driven modelling procedures. Firstly, the self-organizing map (SOM) ANN examines several water quality parameters (specifically water temperature, salinity, nitrogen species, ortho-phosphates, dissolved oxygen and electrical conductivity) interactions with the Chlorophyll-a parameter. The SOM model enables us to visualize the monitored parameters relationships and to comprehend complex biological mechanisms related to Chlorophyll-a production. A second feed-forward ANN model is also developed for predicting the Chlorophyll-a levels. Based on this ANN model, several scenarios associated to the eutrophication-related water quality parameters can be extracted. The combination of these two ANNs models is considered a holistic modelling approximation for the identification of eutrophication scenarios, since it enables not only the prediction of the Chlorophyll-a parameter levels, but also the “capturing” of hidden biological mechanisms associated with algal production.

The human gut microbiota (GM) is a complex and dynamic ecosystem that hosts trillions of commensal and potentially pathogenic microorganisms. It is crucial in protecting humans from pathogens and in maintaining immune and metabolic homeostasis. Numerous studies have demonstrated that GM has a significant impact on health and disease, including Alzheimer’s disease (AD). AD is a progressive neurodegenerative disorder characterized by impaired short-term memory and cognitive deficits. Patients with AD have been reported to exhibit abnormalities in GM density and species composition. Oxidative stress (OS) has been implicated in the onset and progression of AD, however, the relationship between OS and gut microbiota in AD onset and progression is not clear. Twendee X®︎ (TwX), an oral supplement consisting of 8 active ingredients, has been shown to prevent dementia in mild cognitive impairment (MCI) in humans and substantially improve cognitive impairment in mouse models of AD. This positive effect is achieved through the potency of the combined antioxidants that regulate OS and therefore similar results cannot be achieved by a single antioxidant ingredient. To examine the impact of long-term OS elevation as seen in AD on the body and GM, we examined GM alterations during the initial OS elevation using a rat 2-week OS loading model, and examined the effects of TwX on OS and GM. Furthermore, using a questionnaire survey and fecal samples, we analyzed the impact of TwX on healthy individuals' gut bacteria and the associated effect on their quality of life (QOL). TwX was found to increase the number of bacteria species and their diversity in GM, as well as butyrate-producing bacteria, which tend to be reduced in AD patients. Additionally, TwX improved defecation condition and QOL. The gut bacteria function as part of the homeostatic function during OS elevation, and prophylactic administration of TwX strengthened this function. The results suggests that the preventative effect of TwX on dementia may involve the GM in addition to the other effects previously demonstrated.

The rapid progress in artificial intelligence, machine learning, and natural language processing has led to the emergence of increasingly sophisticated large language models (LLMs) enabling their use in healthcare. The study assesses the performance of two LLMs: the GPT-3.5 and GPT-4 models in passing the medical examination for access to medical specialist training in Spain MIR. Our objectives included gauging the model's overall performance, analyzing discrepancies across different medical specialties, discerning between theoretical and practical questions, estimating error proportions, and assessing the hypothetical severity of errors committed by a physician. We studied the 2022 Spanish MIR examination after excluding those questions requiring image evaluations or having acknowledged errors. The remaining 182 questions were presented to the LLM ChatGPT4 and GPT-3.5 in Spanish and English. Logistic regression models analyzed the relationships between question length and question sequence d performance. GPT-4 outperformed GPT -3.5, scoring 86.81% in Spanish (p<0.001). English translations had a slightly enhanced performance. Among medical specialties, GPT-4 achieved a 100% correct response rate in several areas, with specialties like Pharmacology, ICU, and Infectious Diseases showing lower performance. The error analysis revealed that while a 13.2% error rate existed, gravest categories like "error requiring intervention to sustain life" and "error resulting in death" had a 0% rate. Conclusions: GPT-4 performs robustly on the Spanish MIR examination, varying its capability to discriminate knoweldge across specialties. While the model's high success rate is commendable, understanding the error severity is critical, especially when considering AI's potential role in real-world medical practice and its implication on patient safety.

Blind image quality assessment (BIQA) aims to evaluate image quality in a way that closely matches human perception. To achieve this goal, the strengths of deep learning and the characteristics of human visual system (HVS) can be combined. In this paper, inspired by the ventral pathway and dorsal pathway of HVS, a dual-pathway convolutional neural network is proposed for BIQA task. The proposed method consists of two pathways: “what” pathway, which mimics the ventral pathway of HVS to extract the content features of distorted images, and the “where” pathway, which mimics the dorsal pathway of HVS to extract the global shape features of distorted images. Then, the features from the two pathways are fused and mapped to an image quality score. Additionally, the gradient images weighted by the contrast sensitivity are used as the input to the “where” pathway, allowing it to extract global shape features that are more sensitive to human perception. Moreover, a dual-pathway multi-scale feature fusion module is designed to fuse the multi-scale features of the two pathways, enabling the model to capture both global features and local details, thus improving the overall performance of the model. The experiments conducted on six databases show that the proposed method achieves the state-of-the-art performance.

Abstract: This research aims at developing a virtual reality destination experience (VRDE) model as a moderating variable between sustainable tourist behavior (STB) and tourist visit intention (TVI). The portability variable strengthens VRDE, and the content quality variable supports VRDE. The research method used was purposive convenience sampling covering 204 respondents who visited the vicinity of Kebon batik village in Klaten, Central Java, Indonesia. The research findings were H1: STB has a significant effect on VRDE, H2: VDRE has an impact on TRVI, H3: portability has a significant effect on VRDE, and H4: content quality did not have an impact on VRDE. The novelty of this research is the VRDE application applied to Community Sustainable Tourist Behavior in developing countries.

Dupilumab is used to treat atopic dermatitis patients who have proven to be refractory to previous treatments. The aim of this study was to assess evolution and patient reported outcome measures in adult patients with moderate-to-severe atopic dermatitis treated with Dupilumab in routine clinical practice. The outcomes were evaluated and registered at baseline and weeks-16, 40 and 52. The variables evaluated were: diseases severity, pruritus, stressful life events, difficulty to sleep, anxiety and depression, quality of life, satisfaction, adherence to the treatment, efficacy and safety. Eleven patients were recruited between Nov 14th 2017 and Jan 16th 2018. Demographic variables: 90% Caucasian, 82% women. Clinical variables: Mean duration of AD =17.7 (±12.8), 91% had severe disease severity. At baseline, SCORAD mean score = 61.7 (±15.5); itch was reported by 100% of patients; itch Visual Analogue Scale mean range of 8 (6-10); HADS mean total score =13.9 (±5.5); DLQI mean score =13.3 (±8.3): EQ-5D-3L mean range = 57 (30-99). At week-52 there is a significant reduction of SCORAD scores, HADS total score and improved quality of life. ¡This study confirms that Dupilumab, used for 52-weeks under routine clinical practice, maintains the improved atopic dermatitis signs and symptoms obtained at week-16, with a good safety profile.

In this paper, the power quality of interconnected microgrids is managed using a Model Predictive Control (MPC) methodology which manipulates the power converters of the microgrids in order to achieve the requirements. The control algorithm is developed for the microgrids working modes: grid-connected, islanded and interconnected. The results and simulations are also applied to the transition between the different working modes. In order to show the potential of the control algorithm, a comparison study is carried out with classical Proportional-Integral Pulse Width Modulation (PI-PWM) based controllers. The proposed control algorithm not only improves the transient response in comparison with classical methods but also shows an optimal behavior in all the working modes, minimizing the harmonics content in current and voltage even with the presence of non-balanced and non-harmonic-free three-phase voltage and current systems

Methods for high-quality DNA extraction and knowledge of sex expression and flowering time are essential for applying genomic-assisted breeding and improve the success with hybridization in Guinea yam. A dioecious or monoecious pattern of flowering and sometimes non-flowering is a common phenomenon within and between the Dioscorea species. The flowering in yam plants raised from botanical seeds often takes an extended period, mostly till the first clonal generation after propagation from the tubers. The prolonged process of testing required to identify plant sex and flowering intensity in yam breeding often poses a challenge to realize reduced breeding cycle and apply genomic selection. This study assessed sample preservation methods for DNA quality during extraction and potential of DNA marker to diagnose plant sex at the early seedling stage in white Guinea yam. The predicted sex at the seedling stage was further validated with the visual score for the sex phenotype at the flowering stage. DNA extracted from leaf samples preserved in liquid nitrogen, silica gel, dry ice, and oven drying methods was similar in quality with a high molecular weight than samples stored in ethanol solution. Yam plant sex diagnosis with the DNA marker (sp16) identified a higher proportion of ZW genotypes (female or monoecious phenotypes) than the ZZ genotypes (male phenotype) in the studied materials with 74% prediction accuracy. The results from this study provided valuable insights on suitable sample preservation methods for quality DNA extraction and the potential of DNA marker sp16 to predict sex in white Guinea yam.

Easy to use satellite-based water quality visualizations are needed for monitoring and understanding coastal and inland waters, but to date, no publicly accessible real-time global visualization system was in place. Here we introduce the Ulyssys Water Quality Viewer (UWQV), a Sentinel Hub EO Browser Custom script designed for qualitative views of aquatic chlorophyll and suspended sediment concentrations. The viewer avoids unmixing of the chlorophyll and suspended sediment spectral signal by visualizing these parameters together, with high concentrations of suspended sediment obscuring chlorophyll if present. Cloud masking uses the Hollstein and Braaten algorithms (existing EO Browser custom script code), additionally water surfaces are masked using the Normalized Differential Water Index. Chlorophyll is estimated using reflectance line height-based indicators such as fluorescence line height and maximum chlorophyll index. Suspended sediment is visualized based on single-band reflectances at 620 or 700 nm. Data sources are Sentinel-2 and Sentinel-3 images, allowing either 20 m spatial resolution or up to daily imaging. This visualization system is easy to operate and interpret, and combined with the data service capacity of the Sentinel Hub, it is expected that UWQV will contribute to monitoring of remote water bodies and to our overall understanding of physical limnology and aquatic ecology.

The amount of outdoor particles that indoor environments receive depends on the particle infiltration factors (Fin), peculiar of each environment, and on the outdoor aerosol concentrations and size distributions. The respiratory doses received, while residing indoor, will change accordingly. This study aims to ascertain to what extent such doses are affected by the vertical distance from the traffic sources. Particle number size distributions have been simultaneously measured at street level and at about 20 m height in a street canyon in downtown Rome. The same Fin have been adopted to estimate indoor aerosol concentrations, due to the infiltration of outdoor particles and then the relevant daily respiratory doses. Aerosol concentrations at ground floor were more than double than at 20 m height and richer in ultrafine particles. Thus, although aerosol infiltration efficiency was on average higher at 20 m height than at ground floor, particles more abundantly infiltrated at ground level. On a daily basis, this involved a 2.5-fold higher dose at ground level than at 20 m height. At both levels, such doses were greater than those estimated over the period of activity of some indoor aerosol sources, therefore they represent an important contribution to the total daily dose.

1) Background: The use of linked data in Semantic Web are promising approaches to add value to nutrition research. An ontology, which defines the logical relationships between well-defined taxonomic terms, enables linking and harmonizing research output. To enable the description of domain-specific output in nutritional epidemiology, we propose the Ontology for Nutritional Epidemiology (ONE) according to authoritative guidance for nutritional epidemiologic research; 2) Methods: First, a scoping review was conducted to identify existing ontology terms for reuse in ONE. Second, existing data standards and manuscript reporting guidelines for nutritional epidemiology were converted into ontology, and the terms used in the standards were summarized and listed separately in a taxonomic hierarchy. Third, the ontologies of the nutritional epidemiologic standards, reporting guidelines and the core concepts were gathered in ONE. Three case studies were illustrated for its potential applications. (i) annotation of existing manuscripts and data, (ii) ontology-based inference, and (iii) estimation of reporting completeness in a sample of nine manuscripts; 3) Results: Ontologies for “food and nutrition” (n=33), “disease and special population” (n=86), “data description” (n=21), “research description” (n=32) and “supplementary (meta) data description” (n=44) were reviewed and listed. ONE consists of 339 classes (79 new classes to describe nutrition data and 24 new classes to describe the content of nutrition manuscripts). The case studies demonstrated the application of ONE. 4) Conclusion: ONE is a resource to automate data integration, searching and browsing, and can be used to assess reporting completeness in nutritional epidemiology.

Software defect prediction is an important means to guarantee software quality. Because there are no sufficient historical data within a project to train the classifier, cross-project defect prediction (CPDP) has been recognized as a fundamental approach. However, traditional defect prediction methods using feature attributes to represent samples, which can not avoid negative transferring, may result in poor performance model in CPDP. This paper proposes a multi-source cross-project defect prediction method based on dissimilarity space ( DM-CPDP). This method first uses the density-based clustering method to construct the prototype set with the cluster center of samples in the target set. Then, the arc-cosine kernel is used to form the dissimilarity space, and in this space the training set is obtained with the earth mover’s distance (EMD) method. For the unlabeled samples converted from the target set, the KNN algorithm is used to label those samples. Finally, we use TrAdaBoost method to establish the prediction model. The experimental results show that our approach has better performance than other traditional CPDP methods.

The management of the electrical energy still raises a huge interest for end-users at the household level. Home electricity management systems (HEMS) have recently emerged both to warrant uninterruptible power and high power quality, and to decrease the cost of electricity consumption, by either shifting it in off peak time or smoothing it. Such a HEMS requires a bidirectional DC-AC converter, specifically when an energy transfer is required between a storage system and the AC-grid, and vice versa. This article points out the relevance of an innovative topology based on sinusoidal waveforms from the generation of sine half-waves. Such a topology is based on a DC-DC stage equivalent to an adjustable output voltage source and a DC-AC stage (H-bridge) which are in series. The results of a complete experimental procedure prove the feasibility to improve the power quality of the output signals in terms of total harmonic distortion (THD-values about 5%). The complexity of the proposed converter is minimized in comparison with multilevel topologies. Finally, wide band-gap semiconductor devices (SiC MOSFETs) are helpful both to warrant the compactness and the high efficiency (about 96%) of the bidirectional converter, whatever its operation mode (inverter or rectifier mode).

This article assumes that collaborators who adopt a positive-sum, prosocial perspective can build trust-based relationships, which is equivalent to collaborative ability (CA). To improve a collaborator’s CA, we anticipated that content based upon a model of positive-sum collaboration, founded upon ancestral behaviours presented as social norms, might alter a zero-sum, proself, collaborator’s perspective. However, we also postulated that learner’s willingness to engage in positive-sum content may rely on pre-existing prosociality. Intervention participant’s prosociality was assessed via self-assessment of their emotional intelligence (EQ), quality of life (QoL), and goal orientation (GO). Learner’s engagement in online content was assessed by the three stage reached: examine website front matter; examine website content; learn website content. Tukey’s multiple comparison showed a statistically significant difference between stages one and three, in the mean of respondent’s self-assessed QoL. This suggests that participants who wished to learn content had, on average, higher quality of life, and potentially therefore greater prosociality. In general, these findings support a claim that any intervention designed to increase individual prosociality may need to consider the target population’s reticence to engage.

This paper focuses on evaluating airline service quality from the perspective of passengers view. Until now a lot of researches has performed in airline service quality evaluation in the world but a little research has been conducted in Iran, yet. In this research a framework for measuring airline service quality in Iran is proposed. After reviewing airline service quality criteria, SSQAI model was selected because of its comprehensiveness in covering airline service quality dimensions. SSQAI questionnaire items were redesigned to adopt with Iranian airlines requirements and environmental circumstances in the Iran's economic and cultural context. This study includes fuzzy decision-making theory, considering the possible fuzzy subjective judgment of the evaluators during airline service quality evaluation. Fuzzy TOPSIS have been applied for ranking airlines service quality performances. Three major Iranian airlines which have the most passenger transfer volumes in domestic and foreign flights, were chosen for evaluation in this research. Results demonstrated Mahan airline has got the best service quality performance rank in gaining passengers' satisfaction with delivery of high quality services to its passengers, among the three major Iranian airlines. IranAir and Aseman airlines placed in the second and third rank, respectively, according to passenger's evaluation.Statistical analysis have been used in analyzing passenger responses. Due to abnormality of data, Non-parametric tests were applied. To demonstrate airline ranks in every criterion separately, Friedman test was performed. Variance analysis and Tukey test were applied to study the influence of increasing in age and educational level of passengers' on degree of their satisfaction from airline's service quality. Results showed that age has not significant relation with passenger satisfaction of airlines, however increasing in educational level demonstrated a negative impact on passengers' satisfaction from airline's service quality.

Environmental impact associated with odor and gaseous emissions from animal manure is one of the challenges for communities, farmers, and regulatory agencies. Microbe-based manure additives treatments are marketed and used by farmers for mitigation of emissions. However, their performance is difficult to assess objectively. Thus, comprehensive, practical, and low-cost treatments are still in demand. We have been advancing such treatments based on physicochemical principles. The objective of this research was to test the effect of the surficial application of a thin layer (¼"; 6.3 mm) of biochar on the mitigation of gaseous emissions (as the percent reduction, % R) from swine manure. Two types of biochar were tested: highly alkaline and porous (HAP) biochar made from corn stover and red oak (RO), both with different pH and morphology. Three 30-day trials were conducted with a layer of HAP and RO (2.0 & 1.65 kg∙m^-2, respectively) applied on manure surface, and emissions of ammonia (NH₃), hydrogen sulfide (H₂S), greenhouse gases (GHG), and odorous volatile organic compounds (VOCs) were measured. The manure and biochar type and properties had an impact on the mitigation effect and its duration. RO significantly reduced NH₃ (19-39%) and p-cresol (66-78%). H₂S was mitigated (16~23%), but not significantly for all trials. Significant (66~78%) reductions for p-cresol were observed for all trials. The phenolic VOCs had relatively high % R in most trials but not significantly for all trials. HAP reduced NH₃ (4~21%) and H₂S (2~22%), but not significantly for all trials. Significant % R for p-cresol (91~97%) and skatole (74~95%) were observed for all trials. The % R for phenol and indole ranged from (60~99%) & (29~94%) but was not significant for all trials. The impact on GHGs, isobutyric acid, and the odor was mixed with some mitigation and generation effects. However, larger-scale experiments are needed to understand how biochar properties and the dose and frequency of application can be optimized to mitigate odor and gaseous emissions from swine manure. The lessons learned can also be applicable to surficial biochar treatment of gaseous emissions from other waste and area sources.