The AtomDB project provides models of X-ray and EUV emitting astrophysical spectra for optically thin, hot plasma. We present the new software package, PyAtomDB, which now underpins the entire project, providing access to the underlying database, collisional radiative model calculations, and spectrum generation for a range of models. PyAtomDB is easily extensible allowing users to build new tools and models for use in analysis packages such as XSPEC. We present two of these, the kappa and ACX models for non-Maxwellian and Charge-Exchange plasmas respectively. In addition, PyAtomDB allows full open access to the apec code which underlies all of the AtomDB spectra and has enabled development of a module for estimating the sensitivity of emission lines and diagnostic line ratios to uncertainties in the underlying atomic data. We present these publicly available tools and results for several X-ray diagnostics of Fe L-shell ions and He-like ions as examples.

As the global human population increases, animal agriculture must adapt to provide more animal products while also addressing concerns about animal welfare, environmental sustainability, and public health. The purpose of this review is to discuss the digitalization of animal farming with Precision Livestock Farming (PLF) technologies, specifically biosensors, big data, and block chain technology. Biosensors are noninvasive or invasive sensors that monitor an animal’s health and behavior in real time, allowing farmers to monitor individual animals and integrate this data for population-level analyses. The data from the sensors is processed using big data-processing techniques such as data modelling. These technologies use algorithms to sort through large, complex data sets to provide farmers with biologically relevant and usable data. Blockchain technology allows for traceability of animal products from farm to table, a key advantage in monitoring disease outbreaks and preventing related economic losses and food-related health pandemics. With these PLF technologies, animal agriculture can become more transparent and regain consumer trust. While the digitalization of animal farming has the potential to address a number of pressing concerns, these technologies are relatively new. The implementation of PLF technologies on farms will require increased collaboration between farmers, animal scientists, and engineers to ensure that technologies can be used in realistic, on-farm conditions. These technologies will call for data models that can sort through large amounts of data while accounting for specific variables and ensuring automation, accessibility, and accuracy of data. Issues with data privacy, security, and integration will need to be addressed before there can be multi-farm databases. Lastly, the usage of blockchain technology in animal agriculture is still in its infancy; blockchain technology has the potential to improve the traceability and transparency of animal products, but more research is needed to realize its full potential. The digitalization of animal farming can supply the necessary tools to provide sustainable animal products on a global scale.

The novel coronavirus disease (COVID-19) pandemic has impacted health and wellbeing globally. To strengthen preventive and clinical care amid this pandemic, technological innovations like artificial intelligence (AI) are increasingly used in different contexts. This bibliometric study aimed to assess the current scholarly development and prominent research domains in applications of AI technologies in COVID-19 research. A total of 105 articles were retrieved from MEDLINE database that emphasized on the use of AI in the context of COVID-19. Most articles had multiple authors with a collaboration index of 7.18. Moreover, most of the articles were produced from the USA (22.86%) and China (21.9%), whereas developing countries were underrepresented among the contributing nations. Furthermore, several research domains were identified, including prevention and control, diagnostics, epidemiological characteristics, therapeutics, psychological conditions, and different areas of data sciences related to COVID-19. The current bibliometric evidence shows the early stage of development in this field, which necessitates equitable applications of AI in COVID-19 research emphasizing on health disparities, socio-legal issues, vaccine development, and applied public health research in this pandemic.

Accurate detection of players and teams in ice hockey games is crucial to the tracking of individual players on court and team tactical decisions, which is therefore becoming an important task for coaches and other analysts. However, hockey is a fluid sport due to complex dynamics and frequent substitutions by both teams, resulting in various body positions of players. Few traditional player detection models from other team sports take these characteristics into account, especially for the detection of teams without prior annotations. Here, we design a two-phase cascaded Convolutional Neural Network (CNN) model coupling between individual players position information and team uniform colors to hierarchically detect players in ice hockey games. Our model filters most of disturbing information, such as audience and sideline advertising bars, in Phase I, and refines the detection of targeted players in Phase II, which is efficient and accurate with a precision rate of 91.30% and a recall rate of 95.60% for individual players detection, and an average accuracy of 93.05% in team classification from a self-built dataset of collected images in the 2018 Winter Olympics. Meanwhile, we also present results based on the images and real-time detection from broadcasting videos of 2019-20 NHL regular games covering all 31 teams to show the robustness of our model.

The very first case of corona-virus illness was recorded on 30 January 2020, in India and the number of infected cases, including the death toll, continues to rise. In this paper, we present short-term forecasts of COVID-19 for 28 Indian states and five union territories using real-time data from 30 January to 20May 2020. Applying Holt’s second-order exponential smoothing method and autoregressive integrated moving average (ARIMA) model, we generated 10-day ahead forecasts of the likely number of infected cases and deaths in India until 29 May2020. Our results show that the number of cumulative cases in India will rise to169109 [PI 95% (14426, 19455)], concurrently the number of deaths may increase to 4863 [PI 95% (4221, 5551)] by 29 May 2020.Further, we have marked the states (e.g. Delhi, Uttar Pradesh, Rajasthan, Madhya Pradesh, Maharashtra, Gujarat, and Tamil Nadu) where outburst is expected by considering the cases above three standard deviations. Under the worst-case scenario, Maharashtra is likely to be the most affected state with around 62628 [PI 95% (52840, 73555)] cumulative cases by 29 May 2020. However, Kerala and Karnataka are likely to remain in the lesser affected region. The presented results mark the states where lockdown by 1 June2020, can be loosened.

Background: The world, now in an emergency of preventing the drastic spread of COVID-19. After the infection was first reported in December 2019, almost every country did not pay attention to this highly contaminated disease and failed to react swiftly. Now the whole universe is in an vulnerable state, loosing a great loss of lives and facing difficulties in all socio-economic aspects. That is why we have the urge to develop an efficient mathematical model (quarantine) based on social consciousness to control the epidemic. Methods: This is a quarantine mathematical model. The outcome of the system is dependent on social consciousness. We have calculated the awareness level by considering various socio-economic factor of each country. In our model, the parameters are Education Index, GDP per capita, population density, high literacy and stable economy. To maximize the efficiency of the model, it has to be implemented in initial stage. However, strict application of the method in vigorous stage of epidemic will also bring a satisfactory outcome. Results: Higher social consciousness will decrease the number of infected population dramatically while minimal or lower awareness will do a outburst. Conclusion: Outbreak will be in control of health care system, lower the death rate and will ensure social and economic stability.

Machine learning plays a key role in present day crime detection, analysis and prediction. The goal of this work is to propose methods for predicting crimes classified into different categories of severity. We implemented visualization and analysis of crime data statistics in recent years in the city of Boston. We then carried out a comparative study between two supervised learning algorithms, which are decision tree and random forest based on the accuracy and processing time of the models to make predictions using geographical and temporal information provided by splitting the data into training and test sets. The result shows that random forest as expected gives a better result by 1.54% more accuracy in comparison to decision tree, although this comes at a cost of at least 4.37 times the time consumed in processing. The study opens doors to application of similar supervised methods in crime data analytics and other fields of data science

Quality of Service (QoS) has a significant role in the provision of resources within service oriented distributed systems. In Quality of Service, cloud computing creates new challenges for improvements using the concept of virtualization. Currently, Cloud Computing is very emerging technology in every field of data storage and resource distribution over the network. Considering this new emerging technology, for the ease of data accessibility, price, resource use, restoration, response time and number of constraints the quality performance measures need to be upgraded. The paper highlights the research gap in providing a solution to achieve a Quality of Services in Cloud Computing. We also review the issues and challenges arising in cloud computing to guarantee quality.

Recent prolonged dry periods and lack of irrigation water have severely affected the productivity of coffee farms’ in the Central Highlands of Vietnam. This paper analyzes the efficiency of irrigation water use for Robusta coffee (Coffea canephora) in Lam Dong province, Highlands, Vietnam. A Cobb-Douglas production function was used to determine coffee productivity’s response to the application of irrigation water and other production factors using data collected from 194 farmers while the Technical Efficiency (TE) and Irrigation Water Use Efficiency (IWUE) were analyzed using a Data Envelopment Analysis (DEA) model. The correlation of different factors to IWUE was determined using the Tobit model. The production function analysis using Cobb-Douglas shows that the volume of irrigation water, amount of working capital, labor and farm size significantly influence coffee productivity. It also shows that indigenous farmers are more efficient in utilizing irrigation water than the (mostly Kinh) migrant farmers. The Tobit result, on the other hand. indicates that farmers’ experience, education level, distance of farm to water source, security of access to water source, extension contact and credit access significantly affect IWUE. The study findings further suggest that mitigating water shortages in coffee farms require sub-regional and national policy support such as better access to credit and extension services, training, land management and household-level effort to improve farming practices, through the application of appropriate technologies and traditional knowledge.

Analyses of the Environmental Kuznet's Curve (EKC) hypothesis have largely focused on economy level data with occasional analyses exploring sector level data. This paper exploits a new data set which contains sector level data on greenhouse gas emissions from the US energy sector as well as subsector data from six disjoint subsectors which together comprise the entire energy sector. The data contained in this data set is annual data at the state level from 1990 through 2011. By using differenced data we specify an econometrically sound EKC model and compare it against a model containing only a linear GDP per capita term. We find that by using a subsector level modelling approach, evidence for the EKC hypothesis is virtually nonexistent. Moreover, we find that aggregated subsector level estimates outperform sector level estimate on in-sample accuracy. These estimated models are then used to forecast emissions for the energy sector. We find evidence that US greenhouse gas emissions from energy production are at or near a peak.

Limnologists often adhere to a discretized view of waterbodies—they classify them, divide them into zones, promote discrete management targets, and use research tools, experimental designs, and statistical analyses focused on discretization. This approach to limnology has profoundly benefited the way we understand, manage, and communicate about waterbodies. But the research questions and the research tools in limnology are changing rapidly with consequences for the relevance of our current discretization schemes. Here, I examine how and why we discretize and argue that selectively rethinking the extent to which we must discretize gives us an exceptional chance to advance limnology in new ways.

Hearing impairment (HI) is a common sensory disorder that is defined as the partial or complete inability to detect sound in one or both ears. This diverse pathology is associated with a myriad of phenotypic expressions and/or syndromes. HI can be caused by various intrinsic, environmental and/or unknown factors. Some ontologies capture some relevant HI forms, phenotypes and syndromes, but there is no comprehensive knowledge portal which includes aspects specific to the HI disease state. This hampers inter-study comparability, integration and interoperability within and across disciplines. This work describes the HI Ontology (HIO) that was developed based on the Sickle Cell Disease Ontology (SCDO) model. This is a collaboratively developed resource built around the 'Hearing Impairment' concept by a group of experts in different aspects of HI and ontologies. HIO is the first comprehensive, standardized, hierarchical and logical representation of existing HI knowledge. HIO allows researchers and clinicians alike to readily access standardized HI-related knowledge in a single location and promote collaborations and HI information sharing, including epidemiological, socio-environmental, biomedical, genetic and phenotypic information. Furthermore, this ontology illustrates the adaptability of the SCDO framework for use in developing a disease-specific ontology.

A systematic approach for model updating using the modal identification results is proposed. Modal identification provides mode shapes for physical quantities (acceleration strain, etc.) measured in specific directions at the location of the sensors. Besides, model updating involves the use of the mode shapes related to the nodal degrees-of-freedom of the finite element analytic model. Consequently, the mode shapes obtained by modal identification and the mode shapes of the model updating process do not coincide even for the same mode. Therefore, a method constructing transform matrices that distinguish the cases where measurement is done by acceleration, velocity and displacement sensors and the case where measurement is done by strain sensors is proposed to remedy such disagreement between the mode shapes. The so-constructed transform matrices are then applied when the mode shape residual is used as objective function or for mode pairing in the model updating process. The feasibility of the proposed approach is verified by means of a numerical example in which the strain or acceleration of a simple beam is measured and a numerical example in which the strain of a bridge is measured. Using the proposed approach, it is possible to model the structure regardless of the position of the sensors and to select the location of the sensors independently from the model.

Biofuels construct an essential pillar of energy systems. Biofuels are considered as a popular resource for electricity production, heating, household, and industrial usage, liquid fuels, and mobility around the world. Thus, the need for handling, modeling, decision-making, demand, and forecasting for biofuels are of utmost importance. Recently, machine learning (ML) and deep learning (DL) techniques have been accessible in modeling, optimizing, and handling biofuels production, consumption, and environmental impacts. The main aim of this study is to review and evaluate ML and DL techniques and their applications in handling biofuels production, consumption, and environmental impacts, both for modeling and optimization purposes. Hybrid and ensemble ML methods, as well as DL methods, have found to provide higher performance and accuracy in modeling the biofuels.

Decision-makers are concerned with the inherent complexity of the modern world's markets. However, price fluctuations, environmental concerns, technological development, emerging markets, political challenges, and social expectations made the 21^st century's more dynamic and complex. From a policy-making perspective, it is vital to uncover future trends. This paper proposed that artificial intelligence can improve interpretations in complex markets, such as financial and energy markets. In a complex environment, it is critical to investigate maximum available input features to ensure no valuable informative feature is neglected. Some AI-based models are investigated and presented that AI-based models can successfully uncover future trends. From a scenario development perspective purified input features subset refer to driving forces which shape alternative futures. Results showed that using AI can improve our understanding of how input features influence future behaviors and simultaneously improves prediction accuracy and reliability.

Sleep postures monitoring systems in the hospital aim at transforming sensing signals into quantitative data to characterize the sleep behaviors of the patient. However, a home-care sleep posture monitoring system needs to be user friendly. In this paper, we present iSleePost - a user-friendly home-care intelligent sleep posture monitoring system. We address the labor-intensive labeling issue of traditional machine learning approaches in the training phase. Our proposed mobile health (mHealth) system leverages the communications and computation capabilities of mobile phones for provisioning a continuous sleep posture monitoring service. Our experiments show that iSleePost can achieve 90 percent accuracy in recognizing sleep postures. More importantly, iSleePost demonstrates that an easily-wear wrist sensor can accurately quantify sleep postures.

We proposed a deep learning based chemometric data analysis technique. We trained L2 regularized sparse autoencoder end-to-end for reducing the size of the feature vector to handle the classic problem of curse of dimensionality in chemometric data analysis. We introduce a novel technique of automatic selection of nodes inside hidden layer of an autoencoder through pareto optimization. Moreover, linear regression, ϵ-SVR , and Gaussian process regressor are applied on the reduced size feature vector for the regression. We evaluated our technique on orange juice and wine dataset and results are compared against state-of-the-art methods. Quantitative results are shown on Normalized Mean Square Error (NMSE) and the results show considerable improvement in the state-of- the-art.

A number of studies have shown that assimilation of satellite derived soil moisture using the ensemble Kalman Filter (EnKF) can improve soil moisture estimates, particularly for the surface zone. However, the EnKF is computationally expensive since an ensemble of model integrations have to be propagated forward in time. Here, assimilating satellite soil moisture data from the Soil Moisture Active Passive (SMAP) mission, we compare the EnKF with the computationally cheaper ensemble Optimal Interpolation (EnOI) method over the contiguous United States (CONUS). The background error-covariance in the EnOI is sampled in two ways: i) by using the stochastic spread from an ensemble open-loop run, and ii) sampling from the model spinup climatology. Our results indicate that the EnKF is only marginally superior to one version of the EnOI. Furthermore the assimilation of SMAP data using the EnKF and EnOI is found to improve the surface zone correlation with in-situ observations at a 95% significance level. The EnKF assimilation of SMAP data is also found to improve root-zone correlation with independent in-situ data at the same significance level; however this improvement is dependent on which in-situ network we are validating against. We evaluate how the quality of the atmospheric forcing affects the analysis results by prescribing the land surface data assimilation system with either observation corrected or model derived precipitation. Surface zone correlation skill increases for the analysis using both the corrected and model derived precipitation, but only the latter shows an improvement at the 95% significance level. The study also suggest that the EnOI can be used for bias-correction of the atmospheric fields where post-processed data are not available. Finally, we assimilate three different Level-2 satellite derived soil moisture products from ESA Climate Change Initiative (CCI), SMAP and SMOS (Soil Moisture and Ocean Salinity) using the EnOI, and then compare the relative performance of the three resulting analyses against in-situ soil moisture observations. In this comparison, we find that all three analyses offer improvements over an open-loop run when comparing to in-situ observations. The assimilation of SMAP data is found to perform marginally better than the assimilation of SMOS data, while assimilation of the ESA CCI data shows the smallest improvement of the three analysis products.

The goal of the paper is to investigate the expected participation and mentality of smart citizens in smart cities. The key question is the role of the human factor in smart environments globally studied through a research corpus of the mainstream summaries, trend reports, white papers and visions of business – governmental – university research co- operations. Foremost, a short review of the changing scholarly trends is presented as a theoretical framework. Concerning its key ideas, the corpus based findings are recapped and analysed by content networks and the most referred city strategies. Besides, a critical approach reveal further required factors and risks to investigate. The ultimate goal is to understand how the smart city landscape is shaped by citizen-based strategies, open data, empowerment and responsibility. Accordingly, the paper closes with theoretical, practical and metaphor-based recommendations to support the business and political decision making, and also, the emerging scholarly trends in the context of upcoming technological-structural changes.

The road pavement condition affects safety and comfort, traffic and travel times, vehicles operating cost and emission levels. In order to optimize the road pavement management and guarantee satisfactory mobility conditions for all the road users, the Pavement Management System (PMS) is an effective tool for the road manager. An effective PMS requires the availability of pavement distress data, the possibility of data maintenance and updating, in order to evaluate the best maintenance program. In the last decade, many researches have been focused on pavement distress detection, using a huge variety of technological solutions for both data collection and information extraction and qualification. This paper presents a literature review of data collection systems and processing approach aimed at the pavement condition evaluation. Both commercial solutions and research approaches have been included. The main goal is to draw a framework of the actual existing solutions, considering them from a different point of view in order to identify the most suitable for further research and technical improvement, also considering the automated and semi-automated emerging technologies. An important attempt is to evaluate the aptness of the data collection and extraction to the type of distress, considering the distress detection, classification and quantification phases of the procedure.

Companies have been increasing the amount of data that they collect from their systems and processes, considering the decrease in the cost of memory and storage technologies in recent years. The emergence of technologies such as Big Data, Cloud Computing, E-Science, and the growing complexity of information systems made evident that traceability and provenance are promising approaches. Provenance has been successfully used in complex domains, like health sciences, chemical industries, and scientific computing, considering that these areas require a comprehensive semantic traceability mechanism. Based on these, we investigate the use of provenance in the context of Software Process (SP) and introduce a novel approach based on provenance concepts to model and represent SP data. It addresses SP provenance data capturing, storing, new information inferencing and visualization. The main contribution of our approach is PROV-SwProcess, a provenance model to deal with the specificities of SP and its ability in supporting process managers to deal with vast amounts of execution data during the process analysis and data-driven decision-making. A set of analysis possibilities were derived from this model, using SP goals and questions. A case study was conducted in collaboration with a software development company to instantiate the PROV-SwProcess model (using the proposed approach) with real-word process data. This study showed that 87.5% of the analysis possibilities using real data was correct and can assist in decision-making, while 62.5% of them are not possible to be performed by the process manager using his currently dashboard or process management tool.

Remanufacturing is a viable option to extend the useful life of an end-of-use product or its parts, ensuring sustainable competitive advantages under the current global economic climate. Challenges typical to remanufacturing still persist, despite its many benefits. According to the European Remanufacturing Network a key challenge is lack of accurate, timely and consistent product knowledge as highlighted in a 2015 survey of 188 European remanufacturers. With more data being produced by electric and hybrid vehicles, this adds to the information complexity challenge already experienced in remanufacturing. Therefore, it is difficult to implement real-time and accurate remanufacturing for the shop floor; there are no papers that focus on this within an electric and hybrid vehicle environment. To address this problem this paper attempts to (1) identify the required parameters/ variables needed for fuel cell remanufacturing by means of interviews (2) rank the variables by Pareto analysis (3) develop a casual loop diagram for the identified parameters/ variables to visualise its impact on remanufacturing (4) model a simple stock and flow diagram to simulate and understand data and information-driven schemes in remanufacturing.

The main aim of this paper is to explore the issue of big data and to propose a conceptual framework for big data, based on the temporal dimension. The Temporal Big Data Maturity Model (TBDMM) is a means for assessing organization’s readiness to fully profit from big data analysis. It allows the measurement of the current state of the organization’s big data assets and analytical tools, and to plan their future development. The framework explicitly incorporates a time dimension, providing a complete means for assessing also the readiness to process temporal data and/or knowledge that can be found in modern sources, such as big data ones. Temporality in the proposed framework extends and enhances the already existing maturity models for big data. This research paper is based on a critical analysis of literature, as well as creative thinking, and on the case-study approach involving multiple cases. The literature-based research has shown that the existing maturity models for big data do not treat the temporal dimension as the basic one. At the same time, dynamic analytics is crucial for a sustainable competitive advantage. This conceptual framework was well received among practitioners, to whom it has been presented during interviews. The participants in the consultations often expressed their need of temporal big data analytics, and hence the temporal approach of the maturity model was widely welcomed.

This study provides a unique procedure for validating and reconstructing temperature and precipitation data. Although developed from data in Middle Italy, the validation method is intended to be universal, subject to appropriate calibration according to the climate zones analysed. This~research is an attempt to create shared applicative procedures that are most of the time only theorized or included in some software without a clear definition of the methods. The purpose is to detect most types of errors according to the procedures for data validation prescribed by the World Meteorological Organization, defining practical operations for each of the five types of data controls: gross error checking, internal consistency check, tolerance test, temporal consistency, and~spatial consistency. Temperature and~precipitation data over the period 1931--2014 were investigated. The~outcomes of this process have led to the removal of 375 records (0.02%) of temperature data from 40 weather stations and 1286 records (1.67%) of precipitation data from 118 weather stations, and 171 data points reconstructed. In conclusion, this work contributes to the development of standardized methodologies to validate climate data and provides an innovative procedure to reconstruct missing data in the absence of reliable reference time series.

China’s transportation industry has made rapid progress, which has led to a mass of carbon emissions. However, it is still unclear how the carbon emission from transport sector is punctuated by shifts in underlying drivers. This paper aims to examine the process of China’s carbon emissions from transport sector as well as its major driving forces during the period of 2000 to 2015 at the provincial level. We firstly estimate the carbon emissions from transport sector at the provincial level based on the fuel and electricity consumption using a top-down method. We find that the carbon emission per capita is steadily increasing across the nation, especially in the provinces of Chongqing and Inner Mongolia. However, the carbon emission intensity is decreasing in most provinces of China, except in Yunnan, Qinghai, Chongqing, Zhejiang, Heilongjiang, Jilin, Inner Mongolia, Henan and Anhui. We then quantify the effect of socio-economic factors and their regional variations on the carbon emissions using panel data model. The results show that the development of secondary industry is the most significant variable in both the entire nation level and the regional level, while the effects of the other variables vary across regions. Among these factors, population density is the main motivator of the increasing carbon emissions per capita from transport sector for both the whole nation and the western region, whereas the consumption level per capita of residents and the development of tertiary industry are the primary drivers of per capita carbon emissions for the eastern and central region.

This paper relies on accounting-based measures of country risk to investigate U.S. global banks' exposure to foreign country risk over the 2017 fiscal year as measured by the sum of cross-border risk, foreign office risk, and derivative risk claims. We achieve this using panel linear modeling methods with country level heterogeneity and time fixed effects, along with a constructed panel data of 284 observations on 71 countries distributed across 6 world regional blocks, and observed over 4 consecutive quarters starting from 4th quarter 2016 and ending with 3rd quarter 2017. The results show that on average, over the four quarters, a 1% increase in foreign banking sector's claims significantly increases U.S. global banks cross border risk exposure by 0.34%, while reducing derivative risk exposure by 0.22%, but have no significant impact on foreign office risk exposure. Similar results are observed with public sector claims which significantly increase banks' exposure to cross border risk by 0.21%, while reducing derivative risk exposure by 0.19%. Conversely however, non-bank financial sector claims are found to have no significant affect on cross-border risk exposure, but significantly reduce foreign office risk exposure by 0.09%, while increasing derivative risk exposure by 0.06%. These results indicate the presence of sectoral heterogeneities in U.S. banks' exposure to foreign counterparties' risk, and also that overall, over the course of 2017 the level of U.S. global banks' cross-border risk exposure increased, while their level of derivative risk exposure decreased, and the level of foreign office risk exposure remained relatively unchanged.

Linear regression is a basic tool in mobile robotics, since it enables accurate estimation of straight lines from range-bearing scans or in digital images, which is a prerequisite for reliable data association and sensor fusing in the context of feature-based SLAM. This paper discusses, extends and compares existing algorithms for line fitting applicable also in case of strong covariances between the coordinates at each single data point, which must not be neglected if range-bearing sensors are used. Besides, particularly the determination of the covariance matrix is considered, which is required for stochastic modeling. The main contribution is a new error model of straight lines in closed form for calculating fast and reliably the covariance matrix dependent on just a few comprehensible and easily obtainable parameters. The model can be applied widely in any case when a line is fitted from a number of distinct points also without a-priori knowledge of the specific measurement noise. By means of extensive simulations the performance and robustness of the new model in comparison to existing approaches is shown.

Good data analysis is required for the optimal design of water resources projects. However, data are not regularly collected due to material or technical reasons, which results in incomplete-data problems. Available data and data length are of great importance to solve those problems. Various studies have been conducted on missing data treatment. This study used data from the flow observation stations on Yeşilırmak River in Turkey. In the first part of the study, models were generated and compared in order to complete missing data using ANFIS, multiple regression and Normal Ratio Method. In the second part of the study, the minimum number of data required for ANFIS models was determined using the optimum ANFIS model. Of all methods compared in this study, ANFIS models yielded the most accurate results. A 10-year training set was also found to be sufficient as a data set.

Nonlinear nonparametric statistics (NNS) algorithm offers new tools for curve fitting. A relationship between k-means clustering and NNS regression points is explored with graphics showing a perfect fit in the limit. The goal of this paper is to demonstrate NNS as a form of unsupervised learning, and supply a proof of its limit condition. The procedural similarity NNS shares with vector quantization is also documented, along with identical outputs for NNS and a k nearest neighbours classification algorithm under a specific NNS setting. Fisher's iris data and artificial data are used. Even though a perfect fit should obviously be reserved for instances of high signal to noise ratios, NNS permits greater flexibility by offering a large spectrum of possible fits from linear to perfect.

This paper presents a methodology to design sensor fusion parameters using real performance indicators of navigation in UAVs based on PixHawk flight controller and peripherals. This methodology and the selected performance indicators allows to find the best parameters for the fusion system of a determined configuration of sensors and a predefined real mission. The selected real platform is described with stress on available sensors and data processing software, and the experimental methodology is proposed to characterize sensor data fusion output and determine the best choice of parameters using quality measurements of tracking output with performance metrics not requiring ground truth.

Deck inclination and vertical displacements are among the most important technical parameters to evaluate the health status of a bridge and to verify its bearing capacity. Several methods, both conventional and innovative, are used for structural rotations and displacement monitoring; no one of these does allow, at the same time, precision, automation, static and dynamic monitoring without using high cost instrumentation. The proposed system uses a common laser pointer and image processing. The elastic line inclination is measured by analyzing the single frames of a HD video of the laser beam imprint projected on a flat target. For the image processing, a code was developed in Matlab® that provides instantaneous rotation and displacement of a bridge, charged by a mobile load. An important feature is the synchronization of the load positioning, obtained by a GNSS receiver or by a video. After the calibration procedures, a test was carried out during the movements of a heavy truck maneuvering on a bridge. Data acquisition synchronization allowed to relate the position of the truck on the deck to inclination and displacements. The inclination of elastic line was obtained with a precision of 0.01 mrad. The results demonstrate the suitability of the method for dynamic load tests, control and monitoring of bridges.

Solar radiation is the main energy source for mankind and an accurate data of solar radiation levels for a particular location is vital for the optimum operation of solar energy transducers such as photovoltaic cells and solar thermal collectors. In this work, we show that there is a linear relationship between recorded monthly average temperatures and solar radiation in Swaziland. The correlation can be utilized to develop two mathematical models for the estimation of solar radiation: one from the measured monthly average temperatures and the other based on the square-root of the difference between measured maximum and minimum monthly average temperatures. Both models fit the data well and can be applied to estimate solar radiation in other parts of the region.

Continuous object tracking in WSNs, such as monitoring of mud-rock flows, forest fires etc., is a challenging task due to characteristic nature of continuous objects. They can appear randomly in the network field, move continuously, and can change in size and shape. Monitoring such objects in real-time generally require tremendous amount of messaging between sensor nodes to synergistically estimate object’s movement and track its location. In this paper, we propose a novel twofold-sink mechanism, comprising of a mobile and a static sink node. Both sink nodes gather information about boundary sensor nodes, which is then used to uniformly distribute energy consumption across all network nodes, thus helping in saving residual energy of network nodes. Numerous object tracking schemes, using mobile sink, have been proposed in the literature. However, existing schemes employing mobile sink cannot be applied to track continuous objects, because of momentous variation of network topology. Therefore, we present in this paper a mechanism, transformed from K-means algorithm, to find the best sensing location of the mobile sink node. It helps to reduce transmission load on the intermediate network nodes situated between static sink node and the ordinary network sensing nodes. The simulation results show that the proposed scheme can distinctly improve life time of the network, compared to one-sink protocol employed in continuous object tracking.

The comprehensibility of good predictive models learned from high-dimensional gene expression data is attractive because it can lead to biomarker discovery. Several good classifiers provide comparable predictive performance but differ in their abilities to summarize the observed data. We extend a Bayesian Rule Learning (BRL-GSS) algorithm, previously shown to be a significantly better predictor than other classical approaches in this domain. It searches a space of Bayesian networks using a decision tree representation of its parameters with global constraints, and infers a set of IF-THEN rules. The number of parameters and therefore the number of rules are combinatorial to the number of predictor variables in the model. We relax these global constraints to a more generalizable local structure (BRL-LSS). BRL-LSS entails more parsimonious set of rules because it does not have to generate all combinatorial rules. The search space of local structures is much richer than the space of global structures. We design the BRL-LSS with the same worst-case time-complexity as BRL-GSS while exploring a richer and more complex model space. We measure predictive performance using Area Under the ROC curve (AUC) and Accuracy. We measure model parsimony performance by noting the average number of rules and variables needed to describe the observed data. We evaluate the predictive and parsimony performance of BRL-GSS, BRL-LSS and the state-of-the-art C4.5 decision tree algorithm, across 10-fold cross-validation using ten microarray gene-expression diagnostic datasets. In these experiments, we observe that BRL-LSS is similar to BRL-GSS in terms of predictive performance, while generating a much more parsimonious set of rules to explain the same observed data. BRL-LSS also needs fewer variables than C4.5 to explain the data with similar predictive performance. We also conduct a feasibility study to demonstrate the general applicability of our BRL methods on the newer RNA sequencing gene-expression data.

Logistics plays an important role in globalized companies and contributes to the development of foreign trade. A large number of external conditions, such as recession and inflation, affect logistics. Therefore, managers should find ways to improve operational performance, enabling them to increase efficiency while considering environmental sustainability due to the industry’s large scale of energy consumption. Based on data collected from the financial reports of top global logistics companies, this study uses a DEA model to calculate corporate efficiency by implementing a Grey forecasting approach to forecast future sustainability values. Consequently, the study addresses the problem of how to enhance operational performance while accounting for the impact of external conditions. This research can help logistics companies develop operation strategies in the future that will enhance their competitiveness vis-à-vis rivals in a time of global economic volatility.

For Visually impaired People (VIPs), the ability to convert text to sound can mean a new level of independence or the simple joy of a good book. With significant advances in Optical Character Recognition (OCR) in recent years, a number of reading aids are appearing on the market. These reading aids convert images captured by a camera to text which can then be read aloud. However, all of these reading aids suffer from a key issue – the user must be able to visually target the text and capture an image of sufficient quality for the OCR algorithm to function – no small task for VIPs. In this work, a Sound-Emitting Document Image Quality Assessment metric (SEDIQA) is proposed which allows the user to hear the quality of the text image and automatically captures the best image for OCR accuracy. This work also includes testing of OCR performance against image degradations, to identify the most significant contributors to accuracy reduction. The proposed No-Reference Image Quality Assessor (NR-IQA) is validated alongside established NR-IQAs and this work includes insights into the performance of these NR-IQAs on document images.

This paper examines the fundamental distinctions and complementary relationships between generative and descriptive methods in research and analysis. Through a systematic review of their applications across various fields, we explore how descriptive methods excel in capturing and characterizing existing phenomena, while generative methods enable the creation of new instances based on learned patterns. The analysis reveals that while these approaches serve different primary purposes, their integration often leads to more robust and comprehensive research outcomes. Our findings suggest that understanding the strengths and limitations of both methodologies is crucial for researchers and practitioners in choosing appropriate approaches for their specific contexts.

The article discusses the use of satellite data and drones for land monitoring in Kazakhstan, emphasising their importance in the context of population growth and increasing agricultural demand. Satellite technologies, such as Sentinel-2 and Landsat, provide essential data for analysing land resources, including soil erosion and the condition of agricultural lands. Unmanned aerial vehicles (UAVs) complement satellite data by offering detailed low-altitude imagery, enabling the detection of local issues such as irrigation system failures and soil compaction.The study demonstrates that integrating drone and satellite data allows for more efficient land resource management. For example, 35% of agricultural land in southern Kazakhstan is affected by soil degradation, while overgrazing issues were identified in the northern regions. These innovative monitoring methods enable early detection of threats, allowing timely measures to be taken to improve land management practices.The conclusion highlights that the use of these technologies requires not only infrastructure but also skilled professionals. The integration of satellites and drones creates opportunities for more precise and timely monitoring, which is essential for sustainable land resource management in Kazakhstan.

Enhanced food and nutrition security remains a primary goal for every community. Several interventions have been promoted in dry areas to improve issues on food and nutrition security. However, studies on the level of knowledge, cultural norms, perceptions and attitudes that are key drivers in adoption and uptake to highlight gaps and provide evidence for improvement are limited. This study investigated variables influencing the adoption and implementation of an integrated crop-dairy goat farming system in Elgeyo Marakwet. A descriptive cross-sectional survey entailing qualitative and quantitative approaches among farmers practicing integrated farming was undertaken. A thematic questionnaire was used to collect quantitative data, while key informant interviews and focus groups discussions were used in qualitative research. This study utilized the multi-stage sampling procedure to sample the farmers and sample size was calculated based on Krejcie and Morgan table. Data analysis for quantitative data was done using SPSS software while qualitative data utilized N-vivo software The findings show that farmers have knowledge on the integrated farming system. Age, level of education, land size, gender, perceptions and attitudes influence adoption. Small animals like dairy goats are associated to women in this community hence increasing their participation in access, control and decision making of agricultural resources. The key findings of this study provide baseline data that can form evidence to help inform policy on the indicators contributing to adoption of integrated crop-dairy goat systems to enhance food and nutrition security

E-commerce businesses employ recommender models to assist in identifying a personalized set of products for each visitor. To accurately assess the recommendations’ influence on customer clicks and buys, three target areas—customer behavior, data collection, user-interface —will be explored for possible sources of erroneous data. Varied customer behavior misrepresents the recommendations’ true influence on a customer due to the presence of B2B interactions and outlier customers. Non-parametric statistical procedures for outlier removal are delineated and other strategies are investigated to account for the effect of a large percentage of new customers or high bounce rates. Subsequently, in data collection we identify probable misleading interactions in the raw data, propose a robust method of tracking unique visitors, and accurately attributing the buy influence for combo products. Lastly, user-interface issues discuss the possible problems caused due to the recommendation widget’s positioning on the e-commerce website and the stringent conditions that should be imposed when utilizing data from the product listing page. This collective methodology results in an exact and valid estimation of the customer’s interactions influenced by the recommendation model in the context of standard industry metrics such as Click-through rates, Buy-through rates, and Conversion revenue.

Background: Conventional echocardiography used to assess volumes of the left ventricle (LV) and left atrium (LA) along with mitral regurgitation grade is routine studies before and after transcatheter edge-to-edge mitral valve repair (Mitral TEER). Previous studies focus on LV parameter changes and comparison of the functions before and a few months following Mitral TEER implantation, as well as LA reverse remodeling, by assessing LV volumes. However, less is known regarding LA strain changes in the early phase after the procedure. The objective of the study was to assess the effect of Mitral TEER on LA strain early after TEER procedure. Methods: The retrospective study included 44 patients who underwent Mitral TEER. LA strain and volumes were evaluated by speckle tracking echocardiography at baseline and 24-48 hours following the procedure. Demographic, echocardiographic, and clinical characteristics were obtained and statistically analyzed. Results: LA global longitudinal strain (GLS) reservoir improved significantly (from 12.2±7 to 14.7±6.4, p=0.0079) after Mitral TEER. Significant improvements were also seen in LA volumes (LA maximal and minimal volume), which reduced by 17% and 22.5% respectively. LV GLS was significantly changed (from -9.8% to -12.8%, p

The Notch signaling pathway plays a major role in embryological development and in the ongoing life processes of many animals. Its role is to provide cell-to-cell communication in which a Sender cell, bearing membrane -embedded ligands, instructs a Receiver cell, bearing membrane- embedded receptors, to adopt one of two available fates. Elucidating the evolution of this pathway is the topic of this paper, which uses an orthologs approach to build a firm base for such a study. Using BLAST searches, orthologs were identified for all of the 49 listed components of the Notch signaling pathway. The time course of the integration of these proteins as animal evolution proceeded was elucidated. Insofar as cell –to-cell communication is only of relevance in multicellular animals, it is not surprising that the Notch system reached a fully-working configuration only with the evolutionary appearance of the Metazoa, the first multicellular animals The roles of the Notch system’s 49 components in contemporary descendants of the ortholog-contributing ancestors were ascertained from a survey of the literature. A single protein, the protein tyrosine kinase (PTK) of the protozoan Ministeria vibrans was identified as a possible pre-Metazoan ancestor of the DLL, JAG, and NOTCH proteins. A scenario for the evolution of the Notch signaling pathway is presented and described as the co-option of its components, clade by clade, in a repurposing of genes already present in the ancestral unicellular organisms.

Over 2.2 billion people across the globe face significant barriers to accessing essential ophthalmic care, with elderly, rural, and refugee populations being disproportionately affected. These obsta-cles deepen existing disparities in eye care. 3D printing is a novel technology that has the potential to transform the field and improve access through alleviating many patient-specific barriers. This article delves into the evolution of 3D printing within ophthalmology, highlighting its current ap-plications and future potential. It explores various 3D printing techniques and biomaterials, dis-cussing their effectiveness in creating advanced solutions such as bioengineered corneas, ocular prosthetics, and innovative treatments for dry eye syndrome. Additionally, 3D printing has rev-olutionized drug delivery systems for conditions like glaucoma, retinal diseases, and for ocular brachytherapy. Despite its promise, the integration of 3D printing into clinical practice presents challenges, which the article addresses alongside strategies for overcoming them. By mapping out the technological advancements and challenges, this review offers a roadmap for enhancing global eye care accessibility and improving patient outcomes on a global scale.

Hydrogen mobility embodies a promising solution to address the challenges posed by traditional fossil-fuel-based vehicles. The use of hydrogen in small heavy duty road vehicles based on internal combustion engines (ICEs) may be appealing for two fundamental reasons: direct electrification seems less promising in heavy duty transport systems and fuel cell-based hydrogen vehicles implementation may not proceed at the expected pace due to higher investment costs compared to ICEs. On the other hand, hydrogen combustion is gaining attractiveness and relies on robust and cheap technologies, but it is not the only renewable solution. In this framework, this work presents a methodology to assess Weel-to-Whell primary energy consumption and CO2 emissions of small heavy-duty vehicles. The methodology is applied in a real case-study, namely a passenger coach travelling on a 100 km-mission in non-optimized conditions. Therefore, the suitability of hydrogen is compared with standard diesel and other alternative diesel-type fuels (biodiesel and synthetic diesel types). Hydrogen shows competitivity with standard diesel from the point of view of CO2 emission reduction (-29%) while it hides a higher primary energy consumption (+40%). Nonetheless, HVO brings the highest benefits both from the point of view of primary energy consumption and emission reduction, namely -35% and 464-634 kgCO2/100km avoided compared to hydrogen.

Background: The Government of Bangladesh is currently providing COVID-19 vaccines free of cost, but for a massive population, the free vaccination program’s sustainability is challenging. In this regard, assessing willingness to pay can help to explore vaccine pricing, subsidizing strategy, and vaccine demand. The study aimed to evaluate the prevalence of willingness to pay (WTP) for the COVID-19 vaccine and its associated factors to ensure the sustainability of the vaccination program. Methods: A cross-sectional research design was adopted to collect data from 1497 respondents through online and face-to-face interviews. Data were analyzed using the chi-square test and point-biserial correlation for descriptive statistical analysis, and multiple logistic regression analysis was also used to identify the factors associated with the dependent variable in the study. Results: The prevalence of WTP towards a COVID-19 vaccine was 50.9 %, and mean and median WTP were respectively 754.55 BDT (US$ 8.93), 300 BDT (US$ 3.55). WTP of other religions was significantly higher than Muslims (aOR=1.5, P=0.037). WTP was also higher among Graduate (aOR=2.2, P=0.007), Masters & MPhil/PhD (aOR=2, P=0.030), higher family income group (aOR=1, P=0.039) and respondents with higher knowledge about the vaccine (aOR=1.1, P=0.003), behavioral practice (aOR=1.1, P< 0.001), higher subjective norms (aOR=1.2, P=0.009), higher anticipated regret (aOR=1.2, P=0.005) and higher perceived benefits from the vaccine (aOR=1.1, P=0.029). On the contrary, WTP is lower among respondents who had a higher negative attitude toward vaccines (aOR= 0.9, P<0.001) and higher behavioral control (aOR=0.9, P=0.006). The participants who had experienced severe morbidity and who belonged to a higher income group, they have highly tended to WTP's highest amount of money for the COVID-19 vaccine. Conclusion: The study found that nearly half of the respondents were not interested in paying for the COVID-19 vaccine. It emphasizes higher education, proper knowledge dissemination about the COVID-19 vaccine, positive behavioral practice, reducing negative attitudes towards it, and higher household income to increase WTP for the COVID-19 vaccine. Health promotion materials should be developed to improve COVID-19 vaccine knowledge and reduce negative attitudes regarding vaccines. A subsidized scheme for lower-income groups should be initiated to minimize the catastrophic income challenge regarding WTP for the COVID-19 vaccine.

This study explores the effects of powder-to-liquid ratio on the performance characteristics of lost foam casting coatings. The investigation focuses on how variations in this ratio affect key properties including apparent viscosity, shear thinning behavior, coating weight, and surface morphology. Through a series of controlled experiments, coatings were prepared with different powder-to-liquid ratios and assessed for their physical and application properties. The results indicate that increasing the powder-to-liquid ratio raises the apparent viscosity and modifies shear thinning behavior. Notably, ratios exceeding 2.0 result in a sharp increase in viscosity that impedes coating application. The optimal powder-to-liquid ratio was determined to be between 2.0 and 2.2, where coatings demonstrated enhanced uniformity, improved particle distribution, and superior surface morphology. Coating weight increased up to a ratio of 2.2 but decreased beyond this threshold due to excessive viscosity. Both microscopic and macroscopic analyses confirmed that a ratio of 2.0 to 2.2 strikes the best balance for coating performance. These findings underscore the importance of precise powder-to-liquid ratio control to optimize the quality of lost foam casting coatings, offering valuable insights for refining coating formulations and application techniques in industrial contexts.

Background and Objective: To examine the effect of ordered subset expectation maximization (OSEM) parameters on the quantitative image quality of cardiac SPECT images in two different frequently used SPECT cameras and determine the optimal settings for producing images of best diagnostic quality. Another objective was to assess if different cameras produced a significant change in optimal parameters and levels of detectability. Methods: The optimization of OSEM iterative reconstruction algorithm was carried out by comparing image quality metrics, namely, contrast-to-noise ratio (CNR) and defect contrast across 12 OSEM subset-iteration combinations to find the best choice for cardiac perfusion SPECT images. Eight frames were reconstructed using the SIMIND Monte Carlo Simulation package. An activity of 370 MBq (10mCi) and projection acquisition interval of 20 seconds per projection were used. Attenuation (AC) and scatter corrections (SC) were performed in this study for all images. Results: The 16-2 subset-iteration combination yielded the highest CNR and defect contrast values for both cameras. The difference between CNR values for two cameras was found to be around 5% only. Conclusions: Monte Carlo simulations can be useful to investigate how quantitative image quality behaves with respect to reconstruction parameters and correction algorithms in a controlled environment. The found optimum is similar to values reported in previous findings. In this study, the use of different camera brands did not affect the optimum. The quantitative detectability measures were also very similar.

Individuals may exhibit altered foot mechanics, in this case foot pronation, only when fatigue sets in. Therefore, a more evidence-based understanding of these fatigue-induced changes may be helpful for future gait analysis and return to play tests, since fatigue could provide new insights that might explain a person’s complaints. Methods: 25 healthy test persons (24.3±2.7 years, BMI: 22.7±2.8) participated in this controlled non-randomized study of unilateral fatigue of the right foot stabilizing muscles with regard to the pronation of the foot, measured by navicular drop (ND) in a static (statND) und dynamic (dynND) state. The left foot served as a control. Surface electromyography was used to verify fatigue. Results: While statND didn’t change, the dynND increased significantly by 1.44±2.1 mm (= 22.3 %) after fatigue of the foot stabilizing muscles. No correlation was found between statND and dynND. Conclusion: Muscular fatigue can affect foot pronation. The dynND appears to be more representative of the loads in everyday life, whereby most studies work with the statND.

The study looks at how joining live video chats with native English speakers on TikTok helps people who are learning English feel more ready to talk in English and less nervous about it. This study looks at EFL students who join TikTok live sessions. The researcher wants to understand how confident and nervous the students feel when they communicate. He uses qualitative research methods to do this. The study shows that using TikTok in a fun and calming way could help people learn a new language and reduce feelings of worry. This is helpful for teachers and language experts who want to use social media to help people learn languages.

: This study aimed to validate the effects of self-compassion-based forest healing therapy as an intervention for reducing stress and promoting coping resources. Therefore, we investigated the effects of self-compassion-based forest healing therapy on stress, self-compassion, and connectedness to nature. A total of 30 participants were divided into an experimental and control group. Two sessions of forest healing meditation activities were held at the Forest of Healing every two weeks between October and November 2023. As a repeated measures experiment, data were collected before the intervention, after the first intervention, and after the second intervention. Perceived stress, positive and negative affect, and salivary cortisol were measured to assess physiological and psychological stress in participants. Connectedness to nature and self-compassion were measured to evaluate stress-coping resources. The results showed that the forest healing program had significant positive effects on stress and emotional states in the experimental group after the intervention. Further, there was a significant incremental effect on connectedness to nature and self-compassion in the experimental group. Therefore, self-compassion meditation-based forest healing therapy is a feasible and efficient approach for facilitating stress management and coping resource building.

Despite significant prevention efforts, the numbers of physically inactive individuals, chronic illnesses, exhaustion syndromes and sick leaves are increasing. A still unresolved problem with exercise promotion is the low participation of sedentary persons. This collective term covers heterogeneous subgroups. Their engagement with movement campaigns and resistance to change are influenced by numerous factors. Our aim was to analyse survey data on health, performance, lifestyle habits and the approachability to physical activity campaigns obtained from the Germany-wide ActIv survey. From 2,888 study participants aged 50-60 years, 668 persons were categorised into the subgroups "never-athletes", "sports-dropouts", "always-athletes" and "sports-beginners". Large and significant group differences were found for BMI, assessment of quality of life, health and fitness, risk factors and health problems. 42.5% of "never-athletes" and 32.5% of "sports-dropouts" did not state any barriers to sport. There are substantial disparities between the non-athlete groups in terms of their motivation to exercise. In contrast, there are comparatively minor differences in motivation between "sports-dropouts" and "sports-beginners", whose health and fitness are the primary motivators for sport. Our analyses suggest that (i) negative health and performance trends cannot be compensated by appeals for voluntary participation in exercise programmes and (ii) powerful incentive systems are required.

Litsea martabanica root's antioxidant and AChE activity showed promise as a pesticide detoxification agent in our previous study. In addition to roots, its leaves can help mitigate pesticide exposure, although there is limited scientific evidence supporting their efficacy. However, the use of roots in many countries, such as Thailand, could contribute to environmental degradation, as highland communities traditionally cut down whole trees to obtain them. This study aims to evaluate the antioxidant activity and anti-pesticide potential of water extracts from L. martabanica leaves instead of its roots through in vitro and in vivo investigations. The findings showed that L. martabanica water extracts and fractions demonstrated varied antioxidant activity. The water extract, obtained using traditional extraction methods, was chosen for in vivo experiments. Rats received the extract followed by chlorpyrifos exposure for 16 days. Results indicated reduced acetylcholinesterase activity in chlorpyrifos-exposed rats, while treatment with leaf extract led to increased activity, suggesting its potential as a detoxifying agent. Histopathological examination revealed no liver cell necrosis and showed liver cell regeneration, indicating potential protection against free radical-induced liver damage without affecting rat liver weight or biochemical profiles. Utilizing L. martabanica leaves for healthcare purposes holds promise without negative environmental impact.

Single-phase-to-ground fault in non-effectively grounded systems poses serious public safety concern. Along with increasing deployment of low-voltage (LV) sensors, new opportunities and ways are created for solving this traditional problem in distribution systems. A new approach, identifying primary single-phase-to-ground line fault and locating it through measurement data from smart sensors deployed in the secondary side of distribution transformers, is proposed in this paper. When a fault occurs in primary distribution feeder, the transient aerial mode voltage (AMV) of each LV smart sensor is calculated. The fault line can be identified by an abrupt change value of AMV at LV side. Next, by finding the position of the maximum value of this AMV from LV sensors on the fault line, the fault location can be pinpointed to two neighboring distribution transformers. The proposed method has been proven to be efficient and reliable by simulation studies.

Iron deficiency in the fetal and neonatal period (perinatal iron deficiency) bodes poorly to neuro-development. Given its common occurrence and the negative impact on brain development, a screening and treatment strategy that is focused on optimizing brain development in perinatal iron deficiency is necessary. Pediatric societies currently recommend a universal iron supple-mentation strategy for full-term and preterm infants that does not consider individual variation in the body iron status and could lead to under-treatment or over-treatment. Moreover, the focus is on hematological normalcy and not optimal brain development. Several serum iron indices and hematological parameters in the perinatal period are associated with risk of abnormal neurodevelopment, suggesting their potential use as biomarkers for screening and monitoring treatment in infants at risk for perinatal iron deficiency. A biomarker-based screening and treatment strategy that is focused on optimizing brain development will likely improve outcome in perinatal iron deficiency.

The aim of the study was to identify factors associated with non-adherence to tuberculosis (TB) preventive treatment among contacts with latent TB infection of new cases of pulmonary TB cases reported in Catalonia in 2019-2021. All contacts aged 18 years or older with a latent TB infection who received a TB preventive treatment were included in the study. The Chi square test and the odds ratios (OR) were used to assess the association between non-adherence to TB preventive treatment and the study variables, considering a p < 0.05 as statistically significant. Multiple logistic regression analysis was used to detect the in-dependent factors associated with TB preventive treatment non-adherence, considering a p < 0.05 as statistically significant. The percentage of non-adherence to TB preventive treatment found in this study was 23.7%. A multivariable logistic regression analysis determined that the following factors were significantly associated with TB preventive treatment non-adherence among adult contacts: “exposure at school or workplace” (aOR = 3.34), “exposure to an index case without laboratory confirmation of TB” (aOR = 2.07), “immigrant contact” (aOR = 1.81), “male gender” (aOR = 1.75) and “exposure duration <6 hours per week or sporadic exposure” (aOR = 1.60). By contrast, the factor “short-term TB preventive treatment regimen” (aOR = 0.38) was significantly associated with a lower treatment non-adherence. Adherence to TB preventive treatment should be improved among adult contacts of TB pulmonary cases with latent TB infection by recommending short-term treatment regimens and by developing health education activities, with a greater focus on contacts with factors associated with treatment non-adherence.

Disulfiram (DSF), an anti-alcoholism medicine, exerts treatment effects in patients suffering from persistent Borreliosis and also exhibits anti-cancer effects by its copper chelating derivatives. Since chronic/persistent borreliosis is characterized by increased amounts of proinflammatory macrophages, this study investigated opsonin-independent phagocytosis, migration and surface marker expression of in vivo activated human monocyte-derived macrophages and dendritic cells with and without DSF treatment. Phagocytosis of non-opsonized Dynabeads® M-450 and migration of macrophages and dendritic cells were monitored using live cell analyzer Juli™ Br for 24h by imaging every 3.5 min. Results were analyzed by a newly developed software based on the differential phase contrast images of cells before and after ingestion of Dynabeads bearing an electron dense iron core. As a control, phagocytosis was also monitored by visual counting of ingested beads. DSF decreased the phagocytic capacities exhibited by global macrophages and dendritic cells. DSF also impaired the migration of human monocyte-derived macrophages and dendritic cells (hMDMD) and significantly reduced the expression densities of surface antigens CD45 and CD14. In cells consisting of anti-inflammatory M2 macrophages, DSF led to a remarkable cell death and also increased oxidative stress as determined by MitoSox staining. Mitochondrial oxidative stress was a prominent feature in M2 macrophages which were more sensitive to DSF-induced cytotoxicity.

Energy transition is one of the greatest challenges facing humanity today. All micro, small, medium and large enterprises in operation will have to face it, and some can al-ready boast the first successes in this regard. This paper focuses on the involvement of these smallest players in energy transition. Micro and small entities are the largest part of the economy, having a great influence on its development. Looking at the wide scale of their activities, these entities are distinguished by a specific owner-manager relationship. This means that the final decision-making is influenced by business goals, but also by the manager's approach, their awareness of changes, and personal and other factors. Based on a structured and standardized survey questionnaire, the research was carried out using the Computer-Assisted Telephone Interviewing technique between April and May 2022 among owners of micro and small enterprises operating in Poland. The survey showed that active engagement of micro and small enterprises in energy efficiency initiatives is related to their market success and financial health.

Internet of Things (IoT) is what we have as a great breakthrough in 5G network. Although 5G network can support several Internet of Everything (IoE) services, 6G is the network to fully support that. This paper is a survey research presenting the 5G and IoT technology and the challenges coming, with the 6G network being the new alternative network coming to solve these issues and limitations we are facing with 5G. A reference to the Control Plane and User Plane Separation (CUPS) is made with IPv4 and IPv6 addressing which is the foundation of the Network Slicing for the 5G core network. Comparing to other related papers, we provide in depth information on how the Internet of Things (IoT) is going to affect our lifes and how this technology is handled as Internet of Everything (IoE) in 6G network. Finally, a full reference is made to the 6G network with its challenges comparing to the 5G network.

In this study, an analysis was conducted on 16 durum wheat genotypes cultivated under seven different crop management systems. The purpose was to investigate the influence of Genotype (G), Environment (E), and Genotype by Environment interactions (GxE) on the content of total free phenolic compounds (TPC) and the antioxidant capacity (AC) of durum wheat in Mediterranean environments and identify their adaptability in climatic change. Additionally, possible correlations between TPC and AC with protein content (PC), and vitreous-kernel percentage (VKP) of the samples were examined. The results indicated significant impacts from E, G, and GxE on both TPC and AC. Among the E, the mean values for TPC, ABTS, DPPH, and FRAP values were recorded at 48.8 mg TE/100 g dw, 121.3 mg TE/100 g dw, 23.0 mg TE/100 g dw, and 88.4 mg TE/100 g dw, respectively. Environments subjected to splitting topdressing N fertilization consistently showed low values, while the late sowing ones possessed high values. The Organic environment maintained a stable position in the middle across all measurements. The predominant influence was attributed to GxE, as indicated by the order GxE &gt;E&gt;G for ABTS, DPPH, and FRAP while for TPC was E&gt;GxE&gt;G. A comprehensive exploration of GxE interaction holds the potential to improve the total free phenolics content and antioxidant capacity of durum wheat within wheat farming systems. Achieving this enhancement involves the meticulous selection of cultivars that not only display high values but also exhibit stability across diverse conditions. Noteworthy genotypes for TPC include G5, G7 and G10, for ABTS include G3, G5 and G7, and for protein include G1, G9, and G16. G7 and G5 had high presence of frequency with G7 being the closest genotype to the ideal for both TPC and ABTS. These results suggest that the cultivation period as well as the nitrogen fertilization and its application method have a significant impact on the various antioxidant properties of durum wheat. This study holds significant importance as it represents the first comprehensive exploration of the impact of various E on the TPC and AC in durum wheat, with a special emphasis on the crop management. Notably, the significance of several statistical tools is also highlighted, such as the GGE biplot, Pi, and KR, in identifying superior genotypes, with the GGE biplot being highly valuable since it offers a visual representation of the study's outcomes.

According to official sources, the numbers of children-to-parent violence (CPV) in the most advanced countries have been on an increasing trend for more than a decade, which generates great social concern. This phenomenon has also aroused enormous interest among researchers, who have identified risk and protective factors related to adolescent CPV in numerous studies. To contribute to a better explanation of CPV, the aim of the present study was to analyze the relationship between family communication problems and CPV, through psychosocial adjustment variables -psychological distress and positive attitude toward the transgression of social norms- in schooled adolescents. The sample consisted of 8115 adolescents enrolled in schools in the State of Nuevo León (Mexico) (51.5% boys, 49.5% girls), whose ages ranged from 11 to 16 years (M = 13.34, SD = 1.04). Structural equation modeling was performed using Structural Equation Modeling Software (EQS). The results showed that family communication problems have a direct and signif-icant relationship with CPV. It was also observed that there is an indirect relationship between both variables, through the relationships of psychological distress and positive attitude towards the transgression of social norms. The multigroup analysis performed showed gender differences in some of these relationships. Finally, the results and their implications in the field of family intervention are discussed.

Consuming fish sustainably means consuming less and better, considering environmental, social, and economic impacts. This demands more knowledge to make informed decisions. In this study, the main goal was to understand how sustainability education can be used as a tool to raise awareness and promote new habits regarding the sustainable consumption of fish in 4th-grade students at primary school. During the COVID-19 pandemic, face-to-face and online learning methodologies were used in two different groups of students to understand whether the teaching method impacted learning. A sequential explanatory mixed methodology was applied, with a pre-test/post-test design, combined with focus group sessions. Between the pre and post-tests three learning modules were performed. The results showed that the students were unaware of many aspects related to fish sustainable consumption, but the developed activities significantly increased their knowledge of the subject and impacted students to change their consumption behaviours. It was also found that the construction of knowledge by the students after the activities was achieved either by face-to-face or online learning. Interviews from focus group sessions showed that students got to know new fish species, learned about the concept of minimum landing size and closure season and that fish are labelled like other types of food.

Finnish government's carbon neutrality goal by 2035 requires integration of renewable energy sources into the power grid. Considering the stochasticity of these resources, additional sources of flexibility are necessary to balance supply and demand in the power grid. District heating network (DHN) operators in Finland plan to shut down fossil-fuel-based combined heat and power plants and electrify heating systems by deploying heat pumps (HPs) and electric boilers. Techno-economic analysis and optimal operation of DHN-connected HPs and electric boilers in providing ancillary balancing services considering the 15-minute granularity in the balancing markets in Finland were investigated. The objective was to maximize the potential revenue for DHN operators gained from the day-ahead electricity market and frequency containment reserve (FCR) balancing markets. Three inter-connected DHNs in the Helsinki metropolitan area were optimized considering the reference year 2019 and each operator's decarbonization strategies for 2025. HPs could gain the highest profit from FCR-D up-regulation market, while the electric boiler may gain considerable profits from FCR-D down-regulation market. Compared to other balancing markets studied, the FCR-N market had a limited profit margin. Sensitivity analysis indicated that spot electricity prices and CO2 emission allowance prices have a significant impact on the profit from balancing markets.

Chronic Kidney Disease (CKD) is a major public health concern with an increasing proportion of sufferers progressing to renal replacement therapy (RRT). Early identification of those at risk of disease progression could be key in improving outcomes. We hypothesise that urinary liver-type fatty acid binding protein (uL-FABP) may be a suitable biomarker for CKD progression and can add value to currently established biomarkers such as urinary protein to creatinine ratio (uPCR) 583 participants with CKD 1-5 (not receiving renal replacement therapy) entered a 2-yr prospective longitudinal study. UPCR and uL-FABP were measured at baseline and CKD progression was defined as either i) a decline in eGFR of >5ml/min/1.73m2 or an increase in serum creatinine by 10% at 1-yr or ii) a decline in eGFR of >6 ml/min/1.73m2, or an increase in serum creatinine by 20% at 2-yrs or iii) the initiation of RRT. A combined outcome of initiating RRT or death was also included. Approximately 40% of participants showed CKD progression. UL-FABP predicted CKD progression at both years 1 and 2 (OR 1.01, p<0.01). Sensitivity and specificity were comparable to those of uPCR (AUC 0.623 v 0.706) and heat map analysis suggested that uL-FABP in the absence of significant proteinuria can predict an increase in serum creatinine of 10% at 1yr and 20% at 2yr. The risk of the combined outcome of initiating RRT or death was 23% higher in those with high uL-FABP (p<0.01) independent of uPCR. UL-FABP appears to be a highly sensitive and specific biomarker of CKD progression. The use of this biomarker could enhance the risk stratification of CKD and its progression and should be assessed further.

: Ovarian cancer has a dismal prognosis. Standard treatment following surgery relies on platinum-based chemotherapy. However, sizeable percentages of patients are unresponsive. Identification of markers predicting response to chemotherapy might help select eligible patients while sparing unresponsive ones treatment-associated toxicity. Cancer/testis antigens (CTA) are expressed by healthy germ cells and malignant cells of diverse histological origin. This expression profile identifies them as attractive targets of cancer immunotherapies. We analyzed correlations between expression of MAGE-A10 and New York esophageal-1 cancer (NY-ESO-1) CTAs at protein level and effectiveness of platinum-based chemotherapy in patients with advanced-stage high-grade serous ovarian carcinoma (HGSOC). MAGE-A10 and NY-ESO-1 protein expression was analyzed by immunohistochemistry (IHC) in formalin-fixed, paraffin-embedded samples from 93 patients with advanced-stage HGSOC treated at our institutions between January 1996 and December 2013. Correlation between expression of these markers and response to platinum-based chemotherapy, evaluated according to RECIST 1.1 criteria, platinum sensitivity, measured as platinum free interval (PFI), progression free (PFS) and overall survival (OS) was explored. MAGE-A10 protein expression predicts unresponsiveness to platinum-based chemotherapy (p=0.005), poor platinum sensitivity (p<0.001), and poor PFS (p<0.001) and OS (p<0.001). Multiva-riate analysis identifies MAGE-A10 protein expression as independent predictor of poor platinum sensitivity (p=0.005) and shorter OS (p<0.001). Instead, no correlation was observed between NY-ESO-1 protein expression and response to platinum-based chemotherapy (p=0.832), platinum sensitivity (p= 0.168), PFS (p=0.126) and OS (p=0.335). MAGE-A10 protein expression reliably identifies advanced-stage HGSOC unresponsive to platinum-based chemotherapy. Targeted im-munotherapy could represent an important alternative therapeutic option in these cancers.

This paper examines the importance of choice of cooking fuels in wellbeing, analysing relationships between the proportion of population with primary reliance on different types of fuels for cooking (predictor variable), and key wellbeing indices (outcome variables) - Personal Health, Social Life, Civic Engagement, Life Evaluation, Negative Experience. By combining two global datasets from Gallup and WHO, the study adds to current evidence by taking a global perspective. Controlling for demographic factors such as income per capita, age, education level, employment, etc., regression modelling of these relationships show that clean cooking fuels are influential in all of the key wellbeing indices with the exception of the Life Evaluation Index. Among the key wellbeing indices, Personal Health and Negative Experience Indices are the most strongly influenced by choice of clean cooking fuels. By adding access to electricity as an additional predictor variable, the analysis highlights the potential for integrating eCooking into national electrification plans as part of sustainable energy transitions, given that health outcomes (Personal health and Negative experience indices) appear to be as closely linked to choice of cooking fuels as to access to electricity.

Abstract: Urban population growth and the expansion of the built environment, pollution, overexploitation of water, inequality in water distribution, and the impacts of climate change in future availability of water, are all elements that jeopardize urban water security. Due to the complexity of urban water systems and their relevance for urban life, a holistic and integrative perspective is therefore needed to address such challenges. In this paper, Urban Water Metabolism (UWM) has been used for comprehensively understanding water (in)security in the City of Puebla (Mexico) and its metropolitan area. Water inflows and outflows have been estimated using a Material Flow Analysis (MFA) method with data either obtained from official sources or simulated with the Monte Carlo method. Our findings show that the UWM configuration in the City of Puebla and its metropolitan area is effective for generating profits to service providers and water related business, yet ineffective to guarantee citizens’ Human Right to Water and Sanitation (HRWS), a right recognized in the Constitution of Mexico. We conclude that to advance towards an inclusive and sustainable provision of water, economic interests must be reconsidered and therefore adjusted so they can be in line with such aspirational socioecological goals. UWM accounting can therefore inform new water governance arrangements, those based on both the best available knowledge and a vibrant participation of all relevant stakeholders.

Soil salinity is a limiting factor in crop productivity. Inoculating crops with microorganisms adapted to salt stress is an alternative to increasing plant salinity tolerance. Few studies have simultaneously propagated arbuscular mycorrhizal fungi (AMF) and dark septate fungi (DSF) using different sources of native inoculum from halophyte plants, and evaluated their effectiveness. This study selected, in alfalfa plants as trap culture, the infectivity of 38 microbial consortia native from rhizospheric soil (19) or roots (19) coming from six halophyte plants, as well as their effectiveness in mitigating salinity stress. Inoculation with soil resulted in 26%-56% colonization by AMF and 12%-32% by DSF. Root inoculation produced 10%-56% and 8%-24% of colonization, respectively. There was no difference in the number of spores of AMF produced with both inoculum types. The effective consortia were selected based on low Na but high P and K shoot concentrations which is relevant for plant nutrition but more for salt stress mitigation. The microbial consortia selection is presented in a more novel and applicable context, which would allow for the production of native microbial inoculants adapted to salinity to diminish the harmful effects of salinity stress in glycophyte plants in the context of sustainable agriculture.

Non-normal mode stability analysis has long been employed to study linear transient characteristics of wall bounded shear flows. However, the application of this approach to investigate shear flows with stratified thermal conditions (STCF) has received limited attention. This paper examines thermal effects on Taylor-Couette flow. The results in this study indicate the possibility of a subcritical bifurcation in stratified Taylor-Couette flow.

LSUs (RESPONSE TO LOW SULFUR) are plant-specific proteins of unknown function that were initially identified during transcriptomic studies of the sulfur deficiency response in Arabidopsis. Recent functional studies have shown that LSUs are important hubs of protein interaction networks with potential roles in plant stress responses. In particular, LSU proteins have been reported to interact with members of the brassinosteroid, jasmonate signaling, and ethylene biosynthetic pathways, suggesting that LSUs may be involved in response to plant stress through modulation of phytohormones. Furthermore, in silico analysis of the promoter regions of LSU genes in Arabidopsis has revealed the presence of cis-regulatory elements that are potentially responsive to phytohormones such as ABA, auxin, and jasmonic acid, suggesting crosstalk between LSU proteins and phytohormones. In this review, we summarize current knowledge about the LSU gene family in plants and its potential role in phytohormone responses.

Aiming at the problem of low charging efficiency caused by the scattered sensor nodes in traditional wireless rechargeable sensor networks (WRSNs), a UAV-assisted WRSN Online Charging Strategy Based on Dynamic Queue and Improved K-means (UOCS) is proposed. The scheme assumes that the energy consumption of nodes is unpredictable, and only generates charging requests when the energy is lower than a threshold, and performs on-demand responses to nodes that issue charging requests. The scheme combines the characteristics of one-to-one charging of UAVs, the selection and allocation timing of waiting queues and the number of UAVs, and the improved K-means partitioning based on space-time coordination(SPKM), which simplifies the problem of coordinated charging of multiple UAVs and maximizes energy. Using the efficiency and charging success rate, the optimal charging trajectory can be found under the constraint that the node will not starve to death due to power shortage. Finally, a simulation comparison experiment is carried out with the existing UAV charging scheduling strategy. UOCS achieves the optimal node survival rate with low algorithm complexity.

The dynamic response of structural elements subjected to blast loading is a problem of growing interest in the field of defense and security. In this work, a novel computational tool for the rapid evaluation of the effects of explosions, hereafter referred as SimEx, is presented and discussed. The classical correlations for the reference chemical (1 kg of TNT) and nuclear (106 kg of TNT) explosions, both spherical and hemispherical, are used together with the blast wave scaling laws and the International Standard Atmosphere (ISA) model to compute the dynamic response of Single-Degree-of-Freedom (SDOF) systems subject to blast loading. The underlying simplifications in the analysis of the structural response follow the directives established by UFC 3-340-02 and the Protective Design Center Technical Reports of the US Army Corps of Engineers, which offer useful estimates with a low computational cost, enabling in particular the computation of damage diagrams in the Charge Weight-Standoff distance (CW-S) space for the rapid screening of component (or building) damage levels. SimEx is a computer application based on Matlab and developed by the Fluid Mechanics Research Group at University Carlos III of Madrid (UC3M), which has been successfully used for both teaching and research purposes in the Degree in Security Engineering, taught to the future Guardia Civil officers at the Spanish University Center of the Civil Guard (CUGC). This dual use has allowed the development of the application well beyond its initially objective, testing on one hand the implemented capacities by undergraduate cadets with end-user profile, and implementing new functionalities and utilities by Masters and PhD students. With this experience, the application has been continuously growing since its initial inception in 2014 both at a visual and a functional level, including new effects in the propagation of the blast waves, such as clearing and confinement, and incorporating new calculation assistants, such as those for the thermochemical analysis of explosive mixtures; crater formation; fragment mass distributions, ejection speeds and ballistic trajectories; and the statistical evaluation of damage to people due to overpressure, body projection, and fragment injuries.

Detector-based spectral CT offers the possibility of obtaining spectral information from which discrete acquisitions at different energy levels can be derived, yielding so-called virtual monoenergetic images (VMI). In this study, we aimed to develop a jointly optimized deep learning framework based on dual-energy CT pulmonary angiography (DE-CTPA) data to generate synthetic monoenergetic images (SMI) for improving automatic pulmonary embolism (PE) detection in single-energy CTPA scans. For this purpose, we used two data sets: our institutional DE-CTPA data set D1 comprising polyenergetic arterial series and the corresponding VMI at low-energy levels (40 keV) with 7,892 image pairs, and a 10% subset of the 2020 RSNA Pulmonary Embolism Detection Challenge data set D2, which consisted of 161,253 polyenergetic images with dichotomous slice-wise annotations (PE/no PE). We trained a fully convolutional encoder-decoder on D1 to generate SMI from single-energy CTPA scans of D2, which were then fed into a ResNet50 network for training of the downstream PE classification task. The quantitative results on the reconstruction ability of our framework revealed high-quality visual SMI predictions with reconstruction results of 0.984 ± 0.002 (structural similarity) and 41.706 ± 0.547 dB (peak-signal-to-noise ratio). PE classification resulted in an AUC of 0.84 for our model, which achieved improved performance compared to other naive approaches with AUCs up to 0.81. Our study stresses the role of using joint optimization strategies for deep learning algorithms to improve automatic PE detection. The proposed pipeline may prove to be beneficial for computer-aided detection systems and could help rescue CTPA studies with suboptimal opacification of the pulmonary arteries from single-energy CT scanners.

Given the increasing public interest in how ingredients are processed and the growing demand for organic food products, it is critical to understand consumers’ expectations about the process-related quality of organic products. Consumers perceive organic food to be nutritious, healthy and either natural or less processed, as they are afraid of the loss of nutrients and other natural properties of the food products. However, emerging food processing technologies might generate healthy and safe food options with nutritional quality properties. Simplified communication schemes might help to overcome this barrier. The main objective of this paper is to propose a working definition of "careful processing" for organic products and test its consistency while being used in scoring different processing methods by consumers. Results show that the proposed definition allows to consistently rate alternative processing methods. Consumers tend to score novel processing methods such as pulsed electric fields and microwave as less careful, supporting the idea that organic consumers want the least man-made interference with their food products. Results show that a simple but effective definition of careful processing may help consumers to distinguish further organic food products from conventional ones, no matter which communication scheme is used.

The energy sector plays an important role in Mexico’s development trajectory. Mexico makes an interesting case study, because it shows how difficult it is to reduce fossil energy dependence despite geographic and climatic conditions that favour renewable energy deployment and use. Resolving path dependencies and the related carbon lock-in are key to Mexico’s sustainable energy transition. This case study aims to identify and discuss how carbon lock-in affects Mexico’s sustainable energy transition. Mexico’s carbon lock-in involves oil and oil-run power plants that are costly to build but relatively inexpensive to operate. This case study identifies potential entry points for transitioning towards sustainable energy in Mexico – resources that can promote the use of clean energy despite carbon lock-in. For example, focusing on electrification – particularly of the carbon-intensive sectors – can help Mexico transit towards sustainable energy despite institutional constraints. Complementing this case study is a teaching guide with recommendations for using Mexico’s energy transition in courses on sustainability. It introduces a “learning activation framework” to identify emerging opportunities that can advance sustainable energy transitions in different cases of carbon lock-in. Finally, the framework also gives students a chance to help dismantle or cope with carbon lock-ins.

Background: A large majority of primary school pupils fail to achieve 30-minutes in-school moderate-to-vigorous physical activity (MVPA). The aim of this study was to investigate MVPA accumulation and subject frequency during academic lesson segments and the broader segmented school day. Methods: 122 children (42.6% boys; 9.9±0.3yrs) from six primary schools in North East England, wore uniaxial accelerometers for eight consecutive days. Subject frequency was assessed by teacher diaries. Multilevel models (children nested within schools) examined significant predictors of MVPA across each school-day segment (lesson one, break, lesson two, lunch, lesson three). Results: Pupils averaged 18.33±8.34 minutes of in-school MVPA and 90.2% failed to achieve the in-school 30-minute MVPA threshold. Across all school-day segments, MVPA accumulation was typically influenced at the individual level. Lesson one and two - dominated by Math and English - were less active than lesson three. Break and lunch were the most active segments. Conclusion: This study breaks new ground, revealing MVPA accumulation and subject frequency varies greatly during different academic lessons. Morning lessons were dominated by the inactive delivery of Math and English, whereas afternoon lessons involved a greater array of subject delivery that resulted in marginally higher levels of MVPA.

The Standard Model (SM) fails to account for either the triplication of fermion families or chiral symmetry breaking in the electroweak sector. Here we show that both phenomena arise from the approach to chaos of quantum theory near the Fermi scale.

Windows account for a significant proportion of the total energy lost in buildings. The interaction of window type, Window-to-Wall Ratio (WWR) scheduled and window placement height would influence the natural lighting and heat transfer through windows. This is a pressing issue for non-tropical regions considering their high emissions and distinct climatic characteristics. A limitation exists in the adoption of common simulation-based optimisation approaches in the literature, which are hardly accessible to practitioners. This article develops a numerical-based window design optimisation model using a common Building Information Modelling (BIM) platform adopted throughout the industry, focusing on non-tropical regions of Australia. Three objective functions are proposed; the first objective is to maximize the available daylight, and the other two emphasize on the undesirable heat transfer through windows in summer and winter respectively. The developed model is tested on a case study located in Sydney, Australia, and a set of Pareto-optimum solutions is obtained. Through the use of the proposed model, energy savings of up to 16.43% are achieved. Key findings on the case example indicate that leveraging winter heat gain to reduce annual energy consumption should not be the top priority when designing windows for Sydney.

Acknowledging the diverse perceptions about science-religion relationships among learners who come from various religious environments may increase learners’ willingness to learn about evolution. This study is based on a zoology course designed for in-service teachers, which aimed to provide basic scientific knowledge about evolution using the Religious Cultural Competence in Evolution Education framework. The study explores whether learners who were resistant to evolution modify their attitudes and willingness to learn about it, and whether they develop respect toward learners who hold contradicting views. Using qualitative methods, the findings indicate that using the Religious Cultural Competence in Evolution Education framework increased some formerly "resistant" learners’ willingness to learn about evolution and include it in their own teaching, albeit in varying degrees and with various reservations. The learners appreciated the freedom to express their challenges concerning evolution learning or teaching and became more willing to respect opposing perspectives, even though not all the religious learners accepted evolution as an explanation for the development of organisms. This study has international implications for bridging the gap between science and religion, thus reducing resistance to learning and teaching about evolution.

We present and benchmark FilterNet, a flexible deep learning architecture for time series classification tasks, such as activity recognition via multichannel sensor data. It adapts popular CNN and CNN-LSTM motifs which have excelled in activity recognition benchmarks, implementing them in a many-to-many architecture to markedly improve frame-by-frame accuracy, event segmentation accuracy, model size, and computational efficiency. We propose several model variants, evaluate them alongside other published models using the Opportunity benchmark dataset, demonstrate the effect of model ensembling and of altering key parameters, and quantify the quality of the models’ segmentation of discrete events. We also offer recommendations for use and suggest potential model extensions. FilterNet advances the state of the art in all measured accuracy and speed metrics on the benchmarked dataset, and it can be extensively customized for other applications.

Ground-level ozone (O3) increases in the northeastern part of Eurasia, where larch species are dominant trees and have been planted intensively. The Japanese larch (Larix kaempferi; hereafter larch) is classified as the tree species most of its sensitive to O3 based on data from long-shoot needles of seedlings. This criterion should be reconsidered based on O3 uptake, which is strongly depended on stomatal conductance (Gs) of adult trees through the difference in relevant needle traits. Because Gs is closely correlated with photosynthetic activity, we measured the in situ seasonal and yearly change in photosynthetic function, needle mass per area (LMA) and nitrogen (N) content of both short- and long-shoot needles of the canopy of larch trees over successive 3 years. No difference was observed in the in light saturated photosynthetic rate at ambient CO2 (Psat) between needles of hetero types of shoot in the latter part of the growing season, but clear differences were found within a specific year, indicating that seasonal changes in climatic factors determine Psat in the long term. The Psat-N relations differed significantly between the needle types. However, Psat at saturated CO2 (Pmax)-N was quite similar, implying that the CO2 diffusion difference between short- and long-shoots is responsible for the differing Psat -N. In conclusion, seasonal and yearly variations in photosynthetic capacity are mainly determined mainly by climatic variations, whereas shoot type determined the traits of photosynthetic N utilization as well as Gs regulation.

Glioblastoma (GBM) is the most lethal form of brain tumor, characterized by rapid growth and surrounding tissue invasion. The current standard treatment is surgery followed by radiotherapy, and concurrent chemotherapy, typically with temozolomide. Although extensive research has been performed over the past years to develop an effective therapeutic strategy for the treatment of GBM, efforts have not provided major improvements in the overall survival of patients with GBM. Thus, new therapeutic approaches are urgently needed. A major challenge in the development of therapies for central nervous system (CNS) disorders is overcoming the blood–brain barrier (BBB). In this context, the intranasal (IN) route of drug administration has been proposed as a non-invasive alternative route to directly targeting the CNS. In fact, this route of drug administration may bypass the blood-brain barrier and reduce systemic side effects. Recently, formulations have been developed to further enhance nose-to-brain transport, mainly with the use of nano-sized and nanostructured drug delivery systems. The focus of this review will be on the strategies developed to deliver a number of anticancer compounds for the treatment of GBM using the nasal administration. In particular, the specific properties of nanomedicines proposed for the nose-to-brain delivery will be critically evaluated. The number of preclinical and clinical data reviewed support the idea that nasal delivery of anticancer drugs might represent a breakthrough advancement in the fight against GBM.

Background: Mitigating climate change requires fundamentally redesigned energy systems in which renewable energy sources ultimately replace fossil fuels such as natural gas. In this context, the question how and to which extent the gas sector can contribute to an increasingly climate-neutral future EU energy system is heavily debated among scholars, energy industry experts and policy makers. Methods: We take a two-step approach: We begin with a review of studies from energy industry and academia to discuss potential gas sector contributions from a holistic energy system design point of view; this is followed by a comprehensive discussion of technical potentials, micro-economic conditions and societal implications of renewable gas. We then enrich our findings with the results of an empirical focus group process. Results: The gas sector can not only contribute to balancing volatile renewable energy production but also enable the supply of renewable energy to end-users in gaseous form; based on existing infrastructure. This could reduce costs for society, increase public acceptance and ultimately speed up the energy system transformation. There is the theoretical technical potential to substitute major parts of natural gas with renewable gas of biogenic and synthetic nature. This, however, crucially requires a supportive policy framework like the one established for renewable electricity. Conclusion: Given the societal benefits and the competitiveness of renewable gas as compared to renewable alternatives, energy policy makers should incorporate renewable gas and the existing gas infrastructure in the future energy system framework. The objective should be an optimized interplay of various energy vectors and their infrastructure along the entire energy supply chain. This requires a level playing field for different renewable technologies across different policy areas and a form of public support that strikes the balance between facilitating the gradual substitution of natural gas by renewable gas while maintaining public acceptance for this transformation despite higher costs for end-users.: Given the societal benefits and the competitiveness of renewable gas as compared to renewable alternatives, energy policy makers should incorporate renewable gas and the existing gas infrastructure in the future energy system framework. The objective should be an optimized interplay of various energy vectors and their infrastructure along the entire energy supply chain. This requires a level playing field for different renewable technologies across different policy areas and a form of public support that strikes the balance between facilitating the gradual substitution of natural gas by renewable gas while maintaining public acceptance for this transformation despite higher costs for end-users.

Modified FOLFIRINOX is effective for advanced pancreatic cancer but frequently causes severe neutropenia. The present study was designed to investigate the influence of severe neutropenia on clinical outcomes in advanced pancreatic cancer patients receiving modified FOLFIRINOX. Fifty-one advanced pancreatic cancer patients who received modified FOLFIRINOX during January 2014 and May 2018 were subjects of the present study. Adverse events, including neutropenia, were graded according to the Common Terminology Criteria for Adverse Events, version 4.0. Median overall survival (OS) was determined as the primary endpoint, while median time to treatment failure (TTF), overall response rate (ORR), and the incidence of other adverse events were measured as secondary endpoints. Severe neutropenia (grade≥3) occurred in 39 patients (76.4%), in which high level of total bilirubin (>0.6mg/dL) was a significant risk as assessed by a multivariate logistic regression analysis. Median duration of OS was significantly longer in patients with severe neutropenia than in those without it (15.2 months versus 7.2 months, P=0.032). Moreover, there was a significant correlation between OS and the grade of neutropenia (R=0.306, P=0.029). ORR tended to be higher, though not significantly, in patients with severe neutropenia. In contrast, the incidence rates of other adverse events were not different between the two groups. Severe neutropenia is an independent predictor of prognosis in advanced pancreatic cancer patients received modified FOLFIRNOX therapy.

In this paper, we prove some random fixed point theorems for generalized random $\alpha-\psi-$contractive mappings in a Polish space and, as some applications, we show the existence of random solutions of second order random differential equation.

The separation of sister chromatids during anaphase is the culmination of mitosis and one of the most strikingly beautiful examples of cellular movement. It consists of two distinct processes: Anaphase A, the movement of chromosomes toward spindle poles via shortening of the connecting fibers, and anaphase B, separation of the two poles from one another via spindle elongation. I focus here on anaphase A chromosome-to-pole movement. The chapter begins by summarizing classical observations of chromosome movements, which support the current understanding of anaphase mechanisms. Live cell fluorescence microscopy studies showed that poleward chromosome movement is associated with disassembly, or ‘melting’ of the kinetochore-attached microtubule fibers that link chromosomes to poles. Microtubule-marking techniques established that kinetochore-fiber disassembly often occurs through a ‘pac-man’ mechanism, where tubulin subunits are lost from kinetochore-attached plus ends and the kinetochore appears to consume its microtubule track as it moves poleward. In addition, kinetochore-fiber disassembly in many cells occurs partly through ‘flux’, where the microtubules flow continuously toward the poles and tubulin subunits are lost from minus ends. Molecular mechanistic models for how load-bearing attachments are maintained to disassembling microtubule ends, and how the forces are generated to drive pac-man and flux-based movements, are discussed.

GaN ultraviolet photodetector with metal-semiconductor-metal structure is achieved by growing on a periodic trapezoid column-shape patterned sapphire substrate using metalorganic chemical vapor deposition. Under 5-V reverse bias, the photodetector fabricated on such patterned sapphire substrate exhibits a lower dark current, a higher photocurrent, and a 476 % enhancement in the maximum responsivity as compare with those of the photodetector fabricated on conventional flat sapphire substrate. It is also found that the much larger UV-to-visible rejection ratio and the fact that responsivity drops in a smaller cut-off region are observed from photodetector fabricated by using a periodic trapezoid column-shape patterned sapphire substrate. These phenomena may all be attributed to the reduction of threading dislocation density and the improved quality of GaN film, as well as the internal reflection and/or scattering effect on the interface between GaN film and the periodic trapezoid column-shape pattern of the substrate.

Background: The research is conducted against the backdrop of the rising incidence of diabetes and the demand for novel approaches to improve patient outcomes. With the goal of revolutionizing conventional methods and addressing the changing healthcare landscape, the study concentrated on the application of AI technology in diabetes treatment. Objective: Examining the various ways AI can be used in diabetes care and assessing how it can enhance automated screenings, tailored treatment recommendations, predictive modeling, and patient self-management were the main goals of the study. Result: The findings demonstrated how well AI works to anticipate a patient's unique reaction to a therapy, assist medical personnel in making decisions, and give patients more control over their own care. Artificial intelligence (AI)-powered solutions showed promise in improving real-time monitoring and encouraging patient adherence, supporting a comprehensive strategy for managing diabetes. Conclusion: The research indicates that artificial intelligence (AI) has great potential to change the way diabetes is treated. However, it also highlights the need for more research, ethical issues, and validation of AI. The results advocate for joint efforts to ensure responsible and patient-centered technology innovation in diabetes care and encourage the integration of AI with new technologies.

The Upper Hunter Valley is a major coal mining area in New South Wales (NSW), Australia. Due to the ongoing increase of mining activities, PM10 (air-borne particle with an aerodynamic diameter less than 10 micrometres) pollution has become a major air quality concern in local communities. The early part of this study identified two air quality subregions in the valley. This paper aims to provide a holistic summarisation of the relationships between elevated PM10 pollution in two subregions and the local- and synoptic-scale meteorological conditions for spring and summer, when PM10 pollution is relatively high. A catalogue of twelve synoptic types and a set of six local meteorological patterns have been quantitatively derived and linked to each other using the self-organising map (SOM) technique. The complex meteorology-air pollution relationships have been visualised/interpretated on the SOM planes for two representative locations. It was found that the influence of local meteorological patterns differed significantly for mean PM10 levels vs the occurrence of elevated pollution events and between air quality subregions. In contrast, synoptic types showed generally similar relationships with mean vs elevated PM10 pollution in the valley. Two local meteorological patterns, the hot-dry-northwesterly wind conditions and the hot-dry-calm conditions, were found most PM10 pollution conducive in the valley when combined with a set of synoptic counterparts. These synoptic types are featured with the influence of eastward migrating continental high pressure system and westerly troughs, or a ridge extending northwest towards coastal northern NSW or southern Queensland from the Tasman Sea. The method and results can be used in air quality research for other locations of NSW, or similar regions elsewhere.

Recently, the Integrated Air Defense System (IADS) has become vital for the defense system as the military defense system is vital for national security. Placing Integrated Air Defense System batteries among locations to protect locations assets is a crucial problem because optimal solutions are needed for interceptor missiles to intercept attacker missiles for maximizing protection of assets across locations or places. In this research, the procedures of using network algorithms along with developing several network algorithms are going to be demonstrated to develop a model for sequential development of seven network securing strategies of placing Surface to Air Missile (SAM) batteries to maximize the protection of assets across locations (based on given asset values) by generating optimal solutions through computation to destroy maximum attacker missiles by using minimum interceptor missiles with given intercept probability. This network securing strategies can be implemented not only for Integrated Air Defense System (IADS) planning but also Counter Air (CA) planning as Integrated Air Defense System (IADS) is conducted with defensive counter air supported by attack operations in offensive counter air.

Earthquakes are one of the most catastrophic natural phenomena. After an earthquake, earthquake reconnaissance enables effective recovery by collecting building damage data and other impacts. This paper aims to identify state-of-the-art data sources for building damage assessment and provide guidance for more efficient data collection. We have reviewed 38 articles that indicate the sources used by different authors to collect data related to damage and post-disaster recovery progress after earthquakes between 2014 and 2021. The current data collection methods have been grouped into seven categories: fieldwork or ground surveys, omnidirectional imagery (OD), terrestrial laser scanning (TLS), remote sensing (RS), crowdsourcing platforms, social media (SM) and closed-circuit television videos (CCTV). The selection of a particular data source or collection technique for earthquake reconnaissance includes different criteria depending on what questions are to be answered by this data. We conclude that modern reconnaissance missions can not rely on a single data source and that different data sources should complement each other, validate collected data, or systematically quantify the damage. The recent increase in the number of crowdsourcing and SM platforms used to source earthquake reconnaissance data demonstrates that this is likely to become an increasingly important source of data.

Spatial Data Infrastructures (SDI) support the harvesting, curating, storage, and sharing of data along with providing access to development, analytic, and visualization tools that enable the building of innovative applications to address broad or specific challenges. SDIs can be especially powerful in bringing together data and tools supporting a particular theme – and this paper discusses and demonstrates the value of an SDI focused on Health. Many potential benefits of a Health SDI are proposed, and the case of supporting emergency response efforts is developed in detail. Leveraging a Health SDI, a Health Risk Index was created that provides emergency response personnel (both Emergency Operations Managers and Emergency Medical Responders) key insights into the unique health risks the impacted population faces due to the disaster. In order to establish the Health Risk Index, datasets from multiple national and global sources representing health data and social data that influences health outcomes – typically called social determinants of health – are harvested, merged, and republished to support further efforts at advancing the Health Risk Index. Visualizations of the Health Risk Index at the global, national, and sub-national levels down to the address level are presented along with demonstrations of its use.

This paper identifies a criterion for choosing the largest set of rejected hypotheses in high-dimensional data analysis where Multiple Hypothesis testing is used in exploratory research to identify significant associations among many variables. The method neither requires predetermined thresholds for level of significance, nor uses presumed thresholds for false discovery rate. The upper limit for number of rejected hypotheses is determined by finding maximum difference between expected true hypotheses and false hypotheses among all possible sets of rejected hypotheses. Methods of choosing a reasonable number of rejected hypotheses and application to non-parametric analysis of ordinal survey data are presented.

The swift progress in low-dimensional nanocarbons, specifically in the realm of the authentic one-dimensional carbon chain featuring sp¹ hybridization, has unveiled exciting prospects for integrating them into cutting-edge technologies across diverse industries. To fully harness their potential, precise control over the growth process is necessary to obtain desired nanostructure and functionality. However, optimizing properties through traditional approaches has been challenging due to complex interactions. To address this, we implement a focused data-driven strategy for nanocarbon inverse design by leveraging a state-of-the-art data-driven nanocarbon genome approach (NCGA). By uncovering relationships between growth parameters and resultant traits, this serves as an expedient catalyst in engineering nanostructures with tailored attributes. We introduce an extensive array of technological approaches aimed at precisely controlling the growth process. These methods encompass stimulating and precisely adjusting synergistic effects, coordinating atomic vibrations at a collective level through the implementation of multilayer nano-interfaces, harnessing the potential of active screen plasma surface engineering, utilizing nano-patterning and allotropic phase transformations, incorporating heteroatom doping, and effectively directing self-assembly. These aim to unlock nanomaterials' latent potential and reveal novel neural pathways within the data-driven NCGA, enhancing its predictive capabilities. Specifically, triggering self-organization during growth can potentially unlock previously unexplored neural pathways. The data-driven NCGA offers a paradigm shift, accelerating discovery and design of nanocarbons with optimized, application-specific properties.

With consumers increasingly aware of the effects of human activity on the environment, tourism products and destinations are increasingly marketed as sustainable and socially responsible. As most sustainable practices lead to additional costs, and tourists’ decisions tend to be price sensitive, achieving sustainability goals necessarily involves understanding how much tourists are willing to pay extra for sustainable practices, as well as the antecedents of such Willingness to Pay (WTP). The present study aims to advance knowledge on the antecedents of WTP for Sustainable Destinations (WTP-4-SD), for which it builds on previous studies employing the Theory of Planned Behavior (TPB) and the New Environmental Paradigm (NEP). In this context, a theoretical model involving Ecotourism Attitudes, Environmental Beliefs, Climate Change-Related Risk Perceptions (CC-RRP), Environmental Concern During trip (ECDT), and Sustainable Consumption Behavior (SCB) as antecedents of WTP-4-SD is proposed. The model was tested based on data collected through an online survey, form a sample of 1,545 Spanish and Portuguese tourists, and analyzed through Structural Equations Modelling (SEM). The findings suggest that a cohesive set of attitudes and beliefs regarding the man-nature relationship, the risks of climate change and the role of tourism – which have been labelled “No Planet-B Attitudes” – is the main driver of WTP-4-SD.

Migraine has a high prevalence worldwide and is one of the main disabling neurological diseases in individuals under the age of 50. In general, treatment includes the use of oral analgesics or non-steroidal anti-inflammatory drugs (NSAIDs) for mild attacks, and, for moderate or severe attacks, triptans or 5-hydroxytryptamine/serotonin (5-HT)1B/1D receptor agonists. However, the administration of antimigraine drugs in conventional oral pharmaceutical dosage forms is a challenge, since many molecules have difficulty crossing the blood-brain barrier (BBB) to reach the brain, which leads to bioavailability problems. Efforts have been made to find alternative delivery systems and/or routes for antimigraine drugs. In vivo studies have shown that it is possible to administer drugs directly into the brain via the intranasal (IN) or the nose-to-brain route, thus avoiding the need for the molecules to cross the BBB. In this field, the use of lipid nanoparticles, in particular solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), has shown promising results, since they have several advantages for drugs administered via the IN route, including increased absorption and reduced enzymatic degradation, improving bioavailability. Furthermore, SLN and NLC are capable of co-encapsulating drugs, promoting their simultaneous delivery to the site of therapeutic action, which can be a promising approach for the acute migraine treatment. This review highlights the potential of using SLN and NLC to improve the treatment of acute migraine via the nose-to-brain route. First sections describe the pathophysiology and the currently available pharmacological treatment for acute migraine, followed by an outline of the mechanisms underlying the nose-to-brain route. Afterwards, the main features of SLN and NLC and the most recent in vivo studies investigating the use of these nanoparticles for the treatment of acute migraine are presented.

In 2004, a significant portion of the spruce-dominated forests in the Tatra National Park (northern Slovakia) was destroyed by an exceptionally strong windstorm. Our study focused on the status of deadwood and its influence on post-disturbance forest regeneration 18 years after the destruction. Since some disturbed areas were salvaged and others were not, we could compare the situations between these two management approaches. In total, 40 research sites (20 salvaged and 20 unsalvaged) were measured, each represented by four satellite-like plots with a radius of 4 m. We measured the diameters of deadwood and its decay status (classes 1 – 5). At the same time, we recorded the sizes (stem base diameter and height) and species of young trees. The results showed that while salvage conditions and contact with soil stimulated deadwood decomposition, the diameter of logs was not a significant factor. The highest decay class (3.83) was found in deadwood on salvaged areas and attached to the soil, while the lowest decay class (3.10) was found in deadwood on unsalvaged areas and in the case of logs unattached to the soil. While carbon content (based on percentage of wood mass) did not change with decay class, wood density decreased sharply with decay class. Water moisture showed an increasing tendency with decay class. Moreover, our results showed that post-disturbance management influenced forest regeneration. Significantly higher tree diversity was observed in salvaged areas (5.40 species per plot) compared to unsalvaged areas (3.85 species per plot). While areas with logging were predominantly covered by broadleaved species, those without logging were typically dominated by Norway spruce (Picea abies L. Karst). We concluded that although salvage logging decreased the total carbon and water content in deadwood, it can stimulate tree species diversity. Thus, the currently prevailing opinion about the exclusively negative ecological effects of salvage logging should be accepted with caution, and local conditions must be considered before making broad judgments.

The research aims to present an innovative methodology to execute the Heritage conservation processes in a collaborative and interdisciplinary BIM project, with an effective management of the deterioration suffered over time, emphasizing the structures and coatings. The research begins with the architectural survey using scanning techniques (TLS) and terrestrial photogrammetry (SfM) and taking as a study the Duomo of Molfetta (Italy), a unique Romanesque architecture of Puglia (Italy). The methodological process is mainly aided by the precise semantic segmentation of global point clouds, a semi-automatic process assisted by classification algorithms implemented in the post-processing software, and which has allowed the classification of the unstructured information provided by the remote sensing equipment when identifying the architectural-structural systems of a building with high historical values. Subsequently, it has been possible to develop an efficient Scan-to-HBIM workflow, where the Heritage-BIM (HBIM) project has fulfilled the function of a database by incorporating and organizing all the information (graphic and non-graphic) to optimize the tasks of auscultation, identification, classification, quantification and, in turn, facilitating the parametric modeling of unique structures and architectural elements. The results have shown great effectiveness in the processes of characterization of architectural and artistic heritage, focusing on the deformations and deterioration of the masonry in columns, and making multidisciplinary conservation work in an HBIM project more flexible. But there are still some difficulties for the automatic interpretation of 3D point cloud data, related to specific systems of the historical architecture. In conclusion, human action and interpretation continues to be a fundamental pillar to achieve precise results in a heritage environment.

Coseismic landslides have the potential to cause catastrophic disasters. Thus, it is of crucial importance to conduct a comprehensive regional assessment of susceptibility to coseismic landslides. This study rigorously interprets 13,759 coseismic landslides triggered by the 2022 Luding earthquake within the seismic zone. Employing the Newmark method, we systematically assess the susceptibility to coseismic landslides through the application of six distinct displacement regression models. The efficacy of these models is validated against the actual landslide inventory using the area under the curve. A hazard map of coseismic landslides is generated based on the displacement regression model with the highest degree of fit. The results show that Moxi Town, Detuo Town, the flanks of the Daduhe River, Wandonghe River, Hailuogou River, and Yanzigou River are high susceptibility areas for coseismic landslides. The study explores factors influencing model fit, revealing that the inclusion of both epicentral distance and the distance to seismogenic fault and in displacement prediction enhances model performance. Nevertheless, in close proximity to fault zones, the distance to seismogenic fault exerts a more significant influence on the spatial distribution density of coseismic landslides compared to the epicentral distance. Conversely, in regions situated further from fault zones, the epicentral distance has a greater impact on the spatial distribution density of coseismic landslides compared to the distance to seismogenic fault. These findings contribute to a nuanced understanding of coseismic landslide susceptibility and offer valuable insights for future Newmark method-based coseismic landslide displacement calculations.

In response to the escalating global waste production rate, sustainable waste management be-comes indispensable. In parallel, the transformation of energy system is vital in order to ensure affordable, decentralized, and sustainable energy for the global community, based on economic, environmental, and social criteria. Waste-to-Energy (WtE) is an effective option in order to put a stepping stone to address both issues provided that multiple views and criteria are considered. This paper puts forward a generic methodological framework to holistically assess WtE technologies based on the PROMETHEE approach. In addition to environmental, economic, and social aspects, demonstration of applicability of the proposed methodology is realized at national level the case of Greece. Anaerobic Digestion seems to be the most preferable choice, recognized for its cost-effectiveness and lower environmental burden to other WtE technologies (i.e. gasification, pyrolysis, incineration). Insightful expert opinions and public preference are of paramount importance to the adopted approach, revealing technology-specific concerns and preferences. In addition, the material presented underscores a crucial gap in Life Cycle Assessment studies for large-scale WtE, emphasizing the need for future scientific attention and exploration. Public consensus indicates a positive overall attitude towards waste valorization in the context of energy production.

This study describes the implementation of IoT sensors in drinking water systems and fog collector systems in low-income communities in Ecuador. The influence and handling of these sensors are analyzed, as well as the materials and methods used in their implementation. The importance of validating the accuracy and reliability of IoT sensors compared to professional devices, especially in mountain areas, is highlighted. In addition, it is mentioned that the cost-benefit of using IoT sensors in fog catchers and drinking water networks depends on several factors, such as the scale of the project, specific objectives, and available resources. Finally, it is highlighted that the use of IoT sensors in smart construction and water collection systems has proven to be beneficial in preventing effects on the operation.