The prohibitive costs of small-scale solar photovoltaic (PV) racks decreases PV adoption velocity. To overcome these costs challenges, an open hardware design method is used to develop two novel variable tilt racking designs. These are the first stilt mounted racking designs that allow manual change of tilt angle from zero to 90 degrees by varying the length of cables. The racks are designed using the calculated dead, wind and snow loads for Canada as conservative design for most of the rest of the world. Structural capacities of the wooden members are then ascertained and resisting bending moment, shear force, tensile force, and compressive force for them is calculated. A structural and truss analysis is performed to ensure that racking design with-stands the applicable forces. Moreover, implications of changing the tilt angle on the wooden members/cables used to build the system are also determined. The systems offer significant economic savings ranging from 1/3rd to 2/3rd the capital expenses of the commercially available alternatives. In addition, the racking designs are easy-to-build and require minimal manufacturing operations, which increases their accessibility. The stilt-mounted designs can be employed for agrivoltaic settings while allowing farm workers shaded ergonomic access to perform planting, weeding, and harvesting.

By the end of 2023, biowaste must be completely separated or recycled at source based on the EU legislation. Separate biowaste collection and valorisation towards biofuels could play an essential role in the biobased circular economy. In this context, the principal goal of this paper was to demonstrate in pilot scale the technological solution of bioethanol production via the utilisation of urban source-separated biowaste within the city context of Athens, Greece. More specifically, the main aim was the demonstration of a pilot system in continuous operation (over 10 operating cycles) with real feedstock – wet separately collected biowaste. From the 11 pilot trials performed with wet feedstock, the mean starch and cellulose degradation of the pilot trials amounted up to 80.69±16.27% and 79.41±10.37% respectively, while the bioethanol yield was 74.05±6.82%. The latter was comparable to that of more intensive pretreatment methods. Homogenization and shredding that was applied in this study, stand as promising and cost-effective pretreatment methods for bioethanol production from wet feedstock. Further research is needed to optimize conditions and evaluate scalability. Nevertheless, pilot scale testing is a crucial step in the development and deployment of this technology since it serves as a bridge between laboratory research and full-scale implementation, offering a practical and controlled environment to validate and optimize the technology while minimizing risks and uncertainties.

We have investigated the effect of electron-beam irradiation by a forevacuum-pressure plasma-cathode electron source on the surface roughness and hardness of Al2O3- and AlN-based ceramics. The roughness increases with increasing temperature of the processed surface, while the hardness slightly decreases. For aluminum nitride ceramic, we find that the thermal conductivity increases by a factor of 1.5 to 2 depending on the electron-beam irradiation regime.

Nepal is one of the most seismically active regions in the world, as highlighted by the recent devastating 2015, Mw7.8 Gorkha earthquake and a robust assessment of seismic hazard is paramount for the design of earthquake-resistant structures. In this study we present a new probabilistic seismic hazard assessment (PSHA) model for Nepal. We considered data and findings from recent scientific publications, which allowed us to develop a unified homogenized seismicity catalogue, propose alternative Seismic Source Characterization (SSC) models including up-to-date parameters of major thrust faults like Main Frontal Thrust – MFT and Main Boundary Thrust – MBT, while also considering existing SSC models and various hazard modelling strategies within a logic tree framework. The sensitivity analyses show the hazard levels are generally higher for SSC models integrating the major thrust faults, followed by homogenous volume sources and smoothed seismicity approach. The hazard maps covering entire Nepal is presented as well as the Uniform Hazard Spectra (UHS) for 5 selected locations (Kathmandu, Pokhara, Biratnagar, Nepalganj and Dipayal) at return periods of 475- and 2,475-years considering Vs,30=760 m/s. The results obtained are generally consistent with most recent studies. However, a notable variability in hazard levels and several discrepancies with respect to the Nepal Building Code NBC105: 2020 [1] and Global Hazard Model, GEM [2] are noted and possible causes are discussed.

The time interval description is a natural way to introduce finite intervals, like finite time intervals. This approach depends on results for radiation propagation from star sources, where properties relate to a propagation surface, which is finite for every realistic event and measurement. In contrast the usual vector approach like for Newton’s laws depends on introducing an infinite coordinate system. A time interval only approach necessarily has to start from scratch. Properties for time intervals have to be defined with time intervals. Where the first parts of this paper are devoted to time interval set properties, in the discussion part these are applied to quantities and measurements within astronomy. The introduction provides a survey of results.

Solar powering the increasing fleet of electrical vehicles (EV) demands more surface area than may be available for photovoltaic (PV) powered buildings. Parking lot solar canopies can provide the needed area to charge EVs, but are substantially costlier than roof- or ground-mounted PV systems. To provide a lower-cost PV parking lot canopy to supply EV charging beneath them, this study provides a full mechanical and economic analysis on three novel PV canopy systems: (1) exclusively wood, single parking spot spanning system, (2) wood and aluminum double parking spot spanning system, and (3) wood and aluminum cantilevered system for curbside parking. All systems can be scalable to any amount of EV parking spots. The complete designs and bill of materials (BOM) of the canopies are provided along with basic instructions and are released with an open source license that will enable anyone to fabricate them. The results found single-span systems have cost savings of 82%-85%, double-span systems save 43%-50%, and cantilevered systems save 31%-40%. In the first operation year, the PV canopies can provide 157% of energy needed to charge the least efficient EV currently on the market if it is driven the average driving distance in London ON, Canada.

Masons are often overlooked part of impact basins, but play an important role in revealing the lunar history. Previous study in masons were usually limited to gravity data. Few researches were reported on morphology features and chronology, which hampers the construction of a complete geological interpretation for the evolution of each mascons. We use multi source remote sensing data to identify the details characteristic of mascons. Result of topography, gravity and characteristic are combined to prove that a mason beside Copernicus crater is a buried peak-ring basin which is about 130km and 260km in diameter. The underground structure is of confirmed as 890m thick mare basalts by analyzing the spectral feature of the material in a geological outcrop called Copernicus H. Geology evolution analysis joint crater size-frequency distribution (CSDF) dating demonstrate that the buried basin impact event occurred in 3.6Ga. Then a hawaiian-style eruption in late Imbrian formed Sinus Aestuum Ⅰ Dark Mantling Deposit (DMD). Mare basalts filling in 3.4Ga. After that, ejecta from Copernicus impact event in about 820Ma and weathering processes cause the disappearing from lunar surface of the buried basin.

Focusing geophysics to improve recovery factor of hydrocarbon reservoirs adds value and contributes toward ZERO carbon footprint by increasing the recovery factor by of 30-40 % and thus reducing the cost/carbon emission per produced barrel. Thus, the Enhanced Oil Recovery (EOR) market is expected to grow more than 3.5% annually. This will be even more fueled by the Green-House-Gas (GHG) reduction and subsequent CO2 injection into the reservoirs as they are being produced. Presently, geophysics only ac-counts for a small percentage of this market, thus its growth is inevitable since more deterministic observation lead higher operating efficiency. Imaging the fluids (hydro-carbon, water, and CO2) is a key component to optimized production and injection. We designed a novel electromagnetic (EM) acquisition system that combines mul-ti-physics fluid imaging and acquires surface and borehole data with high fidelity. Borehole calibration is needed to upscale reservoir data and parameters to measurement scale. Multiple electromagnetic methods are used as well as microseismics in one layout for Exploration and Production (E & P) problems. Multi-components in electromagnetics allows resolving oil and water-bearing zones equally well while achieving the best ac-curacy suitable for repeat measurements. Because sedimentary basins are intrinsically anisotropic, considering 3-dimensional anisotropy is essential from measurement and 3D modeling viewpoint. Thus, the results have the better subsurface images. Here, we combine hardware design, methodology, 3D modeling, processing, and interpretations into an integrated technology and demonstrate the success with verifiable case histories.

This paper consists of two parts. In part I some new relations for a field theory with time intervals are derived. One concept of field theory evaluated is complementarity, another is field operators both defined within a time interval description. Part II includes specific results and commentary. Discussed are time interval dependent wave propagation surfaces for star source emission waves and derived is a metric propagation surface area requirement. The results allow to consider one same field that like gravitation within General Relativity applies to both non zero and zero mass. The associated field energy is space time dependent for non zero mass, and is related to a space time dependent metric tensor for zero mass wave particles. Defined is internal energy transfer where wave particle numbers increase linearly and mass and momentum diminish, decrease inversely with the distance from the wave emission source. The commentary are applications related to cosmological overall volume and temperature dependence.

The effect of COVID-19 confinement regulations on air quality in the northwestern Alps is here assessed based on measurements at five valley sites in different environmental contexts. Surface concentrations of nitrogen oxides, ozone, particle matter, together with size, chemical, and optical (light absorption) aerosol properties, complemented by observations along the vertical column are considered. The 2020 concentration anomalies relative to previous years’ average are compared with the output of a machine learning algorithm accounting for weather effects and a chemical transport model, their difference being within 10–20 %. Even in the relatively pristine environment of the Alps, the «lockdown effect» is well discernible, both in the early confinement phase and in late 2020, especially in NOx concentrations (NO decreasing by >80 % and NO2 by >50 %). While ozone shows little variation, secondary aerosols increase due to enhanced transport from the neighbouring Po basin and coarse particles decrease due to missing resuspension by traffic and, in the city, to the shutdown of a steel mill. The NO2 vertical column density decreases by >20 %, whereas the aerosol profile is mainly influenced by large-scale dynamics, except a shallow layer about 500 m thick possibly sensitive to curtailed surface emissions.

Language learners often face communication problems when they need to express themselves and do not have this ability. On the other hand, continuous advances in technology create new opportunities to improve second language (L2) acquisition through context-aware ubiquitous learning (CAUL) technology. Since vocabulary is the foundation of all language acquisition, this article presents the ULearnEnglish, an open-source system to allow ubiquitous English learning focused on incidental vocabulary acquisition. To evaluate the proposal, 15 learners used the system developed, and 10 answered a survey based on the Technology Acceptance Model (TAM). Results indicate a favorable response to the use of the learner context to assist them in their learning. The ULearnEnglish achieved an acceptance of 78.66% for the perception of the utility, 96% for the perception of ease of use, 86% for user context assessment, and 88% for ubiquity. This study presented a positive response in using the location of users to assist their learning. Among the main contributions, this study demonstrates an opportunity for ubiquity use in future research in language learning. Also, furthers studies can use the source available to evolve the model and system.

Community-level wastewater monitoring for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA has demonstrated useful correlation with both coronavirus disease 2019 (COVID-19) case numbers and clinical testing positivity. Wastewater monitoring on college campuses has demonstrated promising predictive capacity for the presence and absence of COVID-19 cases. However, to date, such monitoring has largely relied upon composite or grab samples and reverse transcription quantitative PCR (RT-qPCR) techniques, which limits the accessibility and scalability of wastewater monitoring. In this study, we piloted a workflow that uses tampons as passive swabs for collection and reverse transcription loop-mediated isothermal amplification (RT-LAMP) to detect SARS-CoV-2 RNA in wastewater. Results for the developed workflow were available same day, with a time to result following tampon swab collection of approximately three hours. The RT-LAMP 95% limit of detection (76 gene copies reaction-1) was greater than RT-droplet digital PCR (ddPCR; 3.3 gene copies reaction-1). Nonetheless, during a building-level wastewater monitoring campaign conducted in the midst of weekly clinical testing of all students, the workflow demonstrated a same-day positive predictive value (PPV) of 33% and negative predictive value (NPV) of 80% for incident COVID-19 cases. The NPV is comparable to that reported by wastewater monitoring using RT-qPCR. These observations suggest that even with lower analytical sensitivity the tampon swab and RT-LAMP workflow offers a cost-effective and rapid approach that could be leveraged for scalable same-day building-level wastewater monitoring for COVID-19.

Remote sensing technology provides a new way to explore the earth for geoscience applications. In the context of continuous deepening of geological research and the vigorous development of geospatial information science, 3D geological modeling technology has become a research hotspot in the intersection of earth science and information science. The traditional 3D geological modeling technology refers to underground 3D modeling using geological data. This modeling method can only display the underground scene in 3D visualization, but cannot display the surface in detail. In this study, remote sensing technology is adopted to improve the traditional 3D geological modeling method, so that geological modeling can be integrated with remote sensing image, and a new 3D geological modeling method based on remote sensing technology is developed. This method can perform integrated 3D visualization of underground and aboveground scenes, which provides a new way for disaster prevention and reduction, geological prospecting and tectonic interpretation. The new 3D geological modeling method is mainly applied in the geological field, and has made new progress in multi-source heterogeneous geological data fusion, large-scale high-precision modeling, geological grid subdivision, attribute modeling technology, remote sensing image fusion and other aspects. Taking the Ya'an area as an example, this paper makes use of the new generation of 3D geological modeling technology to carry out 3D geological modeling and visual display. The 3D visualization in Ya'an area verifies the feasibility and effectiveness of the new 3D geological modeling method based on remote sensing technology in the current data environment.

For the problem of poor accuracy of the existing multi-rate simulation methods, this paper proposes a multi rate real-time simulation method based on the Norton equivalent, compared with multi-rate simulation method based on the ideal source equivalent. After the Norton equivalence of the fast subsystem and the slow subsystem, they are obtained simultaneously at the junction nodes. In order to reduce the amount of simulation calculation, the Norton equivalent circuit is obtained by incremental calculation. The data interface between the fast subsystem and the slow subsystem is realized by extrapolation method. For ensuring the real-time performance of the simulation, the method that the slow subsystem calculates ahead of the fast subsystem is given for the slow subsystem with a large amount of calculation. Finally, the AC/DC hybrid power system was simulated on the real-time simulation platform (FRTDS), and the simulation results were compared with the single-rate simulation, which verified the correctness and accuracy of the method.

We have determined Hf isotopic compositions of 12 samples associated with the giant El Teniente Cu-Mo deposit, Chile. The samples range in age from ≥8.9 to 2.3 Ma and provide information about the temporal evolution of their magmatic sources from the Late Miocene to Pliocene. Together with previously published data, the new analysis indicate a temporal decrease of 10 εHf(t) units, from +11.6 down to +1.6, in the 12.7 m.y. from 15 to 2.3 Ma. These variations imply increasing incorporation of continental crust through time in the magmas that formed these rocks. The fact that the samples include mantle-derived olivine basalts and olivine lamprophyres suggests that these continental components were incorporated into their mantle source, and not by intra-crustal contamination (MASH). We attribute the increase, between the Middle Miocene and Pliocene, of crustal components in the subarc mantle source below El Teniente to be due to increased subduction erosion and transport of crust into the mantle. The deposit formed above a large, long-lived, vertically zoned magma chamber that developed due to compressive deformation and persisted between the period ~7 to 4.6 Ma. Progressively more hydrous mantle-derived mafic magmas feed this chamber from below, providing heat, H₂O, S and metals, but no unique “fertile” Cu-rich magma was involved in the formation of the deposit. As the volume of these mantle-derived magmas decreased from the Late Miocene into the Pliocene, the chamber crystallized and solidified, producing felsic plutons and large metal-rich magmatic-hydrothermal breccias that emplaced Cu and S into the older (≥8.9 Ma) mafic host rocks of this megabreccia deposit.

Data creation is often the only way for researchers to produce basic geospatial information for the pursuit of more complex tasks and procedures such as those that lead to the production of new data for studies concerning river basins, slope morphodynamics, applied geomorphology and geology, urban and territorial planning, detailed studies, for example, in architecture and civil engineering, among others. This exercise results from a reflection where specific data processing tasks executed in Google Sketchup (Pro version, 2018) can be used in a context of interoperability with Geographical Information Systems (GIS) software. The focus is based on the production of contour lines and Digital Elevation Models (DEM) using an innovative sequence of tasks and procedures in both environments (GS and GIS). It starts in Google Sketchup (GS) graphic interface, with the selection of a satellite image referring to the study area—which can be anywhere on Earth's surface; subsequent processing steps lead to the production of elevation data at the selected scale and equidistance. This new data must be exported to GIS software in vector formats such as Autodesk Design Web format—DWG or Autodesk Drawing Exchange format—DXF. In this essay the option for the use of GIS Open Source Software (gvSIG and QGIS) was made. Correcting the original SHP by removing “data noise” that resulted from DXF file conversion permits the author to create new clean vector data in SHP format and, at a later stage, generate DEM data. This means that new elevation data becomes available, using simple but intuitive and interoperable procedures and techniques which confgures a costless work flow.

Gesture recognition has always been a technique to decrease the distance between the physical and the digital world. In this work, we introduce an Arduino based vehicle system which no longer require manual controlling of the cars. The proposed work is achieved by utilizing the Arduino microcontroller, accelerometer, RF sender/receiver, and Bluetooth. Two main contributions are presented in this work. Firstly, we show that the car can be controlled with hand-gestures according to the movement and position of the hand. Secondly, the proposed car system is further extended to be controlled by an android based mobile application having different modes (e.g., touch buttons mode, voice recognition mode). In addition, an automatic obstacle detection system is introduced to improve the safety measurements to avoid any hazards. The proposed systems are designed at lab-scale prototype to experimentally validate the efficiency, accuracy, and affordability of the systems. We remark that the proposed systems can be implemented under real conditions at large-scale in the future that will be useful in automobiles and robotics applications.

Recently, more and more countries are entering the global race for university competitiveness. On the one hand, global rankings are a convenient tool for quantitative analysis. On the other hand, their indicators are often difficult to quickly calculate, they often contradict each other. We thought about using widely available indicators for a quick analysis of the University's publication strategy. We opted for the normalized citation indicators available in SciVal analytical tool, i.e. Source Normalized Impact per Paper (SNIP) and Field-Weighted Citation Impact (FWCI). We have demonstrated the possibility of applying the correlation analysis to the impact indicators of a document and a journal on the sample of the social and humanitarian fields at Peoples' Friendship University of Russia. Particular attention was paid to the application of the results in practice.

The chemical industry is an integral part of the world economy and a substantial income source for developing countries. However, existing regulations or the enforcement of these regulations, on controlling atmospheric pollutants sometimes may be insufficient, leading to the deterioration of surrounding ecosystems and to a quality decrease of the atmospheric environment. Previous works in this domain fail to generate executable solutions for inspection agencies due to practical challenges. In addressing these challenges, we introduce a so-called Chemical Plant Environment Protection Game (CPEP) to generate reasonable schedules of high-accuracy air quality monitoring stations for inspection agencies. First, Stackelberg Security Games (SSGs) are incorporated together with source estimation methods into this research. Second, high-accuracy air quality monitoring stations as well as gas sensors are modeled into the CPEP. Third, simplified data analysis on the regularly discharging of chemical plants is utilized to construct the CPEP. Finally, an illustrative case study is used to investigate the effectiveness of the CPEP Game, and a realistic case study is conducted to illustrate how the models and algorithms being proposed in this paper, work. Results show that playing a CPEP Game can reduce operational costs of high-accuracy air quality monitoring stations; moreover, playing the game leads to more compliance from the chemical plants towards the inspection agencies.

This study describes the development of an automated bag valve mask (BVM) compression system, which, during acute shortages and supply chain disruptions can serve as a temporary emergency ventilator. The resuscitation system is based on the Arduino controller with a real-time operating system installed on a largely RepRap 3-D printable parametric component-based structure. The cost of the system is under $170, which makes it affordable for replication by makers around the world. The device provides a controlled breathing mode with tidal volumes from 100 to 800 milliliters, breathing rates from 5 to 40 breaths/minute, and inspiratory-to-expiratory ratio from 1:1 to 1:4. The system is designed for reliability and scalability of measurement circuits through the use of the serial peripheral interface and has the ability to connect additional hardware due to the object-oriented algorithmic approach. Experimental results demonstrate repeatability and accuracy exceeding human capabilities in BVM-based manual ventilation. Future work is necessary to further develop and test the system to make it acceptable for deployment outside of emergencies in clinical environments, however, the nature of the design is such that desired features are relatively easy to add with the test using protocols and parametric design files provided.

In this study, a decentralized incineration facility was evaluated over a three-year period, focusing on performance aspects such as burning rate, ash production, fuel and electricity consumption, and ash composition while processing animal by-products (ABP). The total cost for ABP incineration was determined to be 159 € per ton of ABP, with the major components being capital depreciation (42%), maintenance expenditures (26%), labor (18%), and transportation costs (9%). Liquified petroleum gas (LPG) consumption ranged from 3-7 kg per ton of ABP, while electricity use was between 15-20 kWh per ton of ABP incinerated. The incineration process generated 7-10% (by weight) ABP ash, which was characterized by high calcium and phosphorus content and low levels of hazardous trace elements. Leaching tests demonstrated the potential for recovering the alkaline supernatant for flue gas treatment and the phosphorus-rich slurry for fertilizer production. The findings suggest that energy recovery and valorization are crucial for minimizing operational costs and environmental impact, emphasizing the benefits of integrating advanced resource recovery techniques in ABP incineration facilities.

Aflatoxin being a serious threat to public health and international trade, necessi-tates a comprehensive understanding and calculated response with effective inter-vention strategies. This review methodically looks at several aspects of aflatoxin, starting with how it affects international trade laws through feed and feed ingre-dient regulations. Aflatoxin contamination poses serious challenges to world health and the economy, especially in areas that are already at risk. Examining the varia-bles affecting aflatoxin toxicity, the paper clarifies aflatoxin toxicity's complex me-tabolism and the resulting health effects of exposure. The serious repercussions of aflatoxicosis outbreaks and their connections to illnesses like Aspergillosis and cancer are highlighted by a detailed exploration of prospective decontamination techniques as well as strategies for detecting and capturing aflatoxin. A thorough knowledge of the factors that contribute to aflatoxin contamination demonstrates the intricate interactions between environmental variables, farming methods, stor-age circumstances, and different physical, biological, and nutritional components. Strong detection strategies are required due to aflatoxins’ significant effects on an-imal and human health. The paper describes complete preventative tactics that en-compass manipulation in management strategies. global trade and public health from this pervasive threat.

African Swine Fever (ASF) is one of the most important and serious contagious haemorrhagic viral disease of domestic pigs and wild boar, associated to high mortality rates and great sanitary and socioeconomic impact on international trade in animal and swine products. The early detection of the disease is often hampered by an inadequate surveillance. Among the surveillance strategies, passive surveillance of wild boar was considered the most effective for controlling African swine fever virus (ASFV). Otherwise, the design of a sufficiently sensitive ASF surveillance system re-quires a solid understanding of the epidemiology related to the local eco-social context, especially in absence of virus detection. Even if the number of carcasses needed to demonstrate the ASF eradication has been established, the scientific context is poor of details on protocols applied to active search the wild boar carcasses. The aim of the study was to describe the strategy applied for passive surveillance implemented in Sardinia, providing detailed information on the protocol applied in the field in term of number of people, dogs, time and space used to active search car-casses in the Mediterranean area. Using a specific tool developed to record, trace, and share on field data (GAIA Observer App), a total of 33 activities for active search the wild boar carcasses were organized during 2021-2023. Most of these activities were planned to find carcasses previously reported by hunters. A total of 24 carcasses were found, only 2 carcasses were not previously reported. The final protocol applied involved 4 people, with an average speed of 1.5 km/hour. When the carcass was reported, about 2 km of distance should be covered in about 1.5 hours to find the carcasses, and even less time was spent when the dog (not trained) was present. In conclusion, it can be stated that for searching for carcasses it is first mandatory a good collaboration with hunters or other forest visitors to report the carcasses, and involve small groups of expert people to active search the carcasses, possible with the use of hunting dogs with no special training.

COVID-19 is a highly infectious respiratory illness caused by SARS-CoV-2, and acute lung injury (ALI) is the major cause of COVID-19. The challenge in studying SARS-CoV-2 pathogenicity is the limited availability of animal models. Therefore, it is necessary to establish animal models that can reproduce multiple characteristics of ALI to study therapeutic applications. The present study established a mouse model that has features of ALI that are similar to COVID-19 syndrome to investigate the role of ACE2 and the administration of the Chinese herbal prescription NRICM101 in ALI. Mice with genetic modifications, including overexpression of human ACE2 (K18-hACE2 TG) and absence of ACE2 (mACE2 KO), were intratracheally instillated with hydrochloric acid. The acid intratracheal instillation induced severe immune cell infiltration, cytokine storms, and pulmonary disease in mice. Compared with K18-hACE2 TG mice, mACE2 KO mice exhibited dramatically increased levels of multiple inflammatory cytokines (IL-6, TNF-α, and TGF-β1) in bronchoalveolar lavage fluid, histological evidence of lung injury, and dysregulation of MAPK and MMP activation. In mACE2 KO mice, NRICM101 could ameliorate the disease progression of acid-induced ALI. In conclusion, the established mouse model provided an effective platform for researchers to investigate pathological mechanisms and develop therapeutic strategies for ALI, including COVID-19-related ALI.

Animal research has always been crucial for various medical and scientific breakthroughs, providing information on disease mechanisms, genetic predisposition to diseases, and pharmacological treatment. However, the use of animals in medical research is a source of great controversy and ongoing debate in modern science. To ensure a high level of bioethics, new guidelines have been adopted to replace animal testing wherever possible, reduce the number of animals per experiment, and refine procedures to minimize stress and pain. Supporting these guidelines, this article proposes a novel approach for unobtrusive, continuous, and automated monitoring of the respiratory rate of laboratory rats. It uses the cyclical expansion and contraction of the rats’ thorax/abdominal region to determine this physiological parameter. In contrast to previous work, the focus is on unconstrained animals, which requires the algorithms to be especially robust to motion artifacts. To test the feasibility of the proposed approach, video material of multiple rats was recorded and evaluated. High agreement was obtained between RGB-imaging and the reference method (respiratory rate derived from electrocardiography), which was reflected in a relative error of 5.46%. The current work shows that camera-based technologies are promising and relevant alternatives for monitoring the respiratory rate of unconstrained rats, contributing to the development of new alternatives for continuous and objective assessment of animal welfare and hereby guiding the way to modern and bioethical research.

The osseointegration process in and around additively manufactured (AM) lattice structures of a new titanium alloy, Ti–19Nb–14Zr, was evaluated. Three different implants, including lattices with increasing high sidewalls gradually closing them, were designed, manufactured and implanted in the tibia and metatarsal bone of two sheep for twelve weeks. After removal, they were characterized with X-ray computed tomography (XCT). The 3D XCT images were segmented using machine learning. The bone-interface implant (BII) and bone-implant contact (BIC) were studied. The results show that, since AM naturally leads to high roughness surface finish, the wettability of the implant is increased. The new alloy possesses an increased affinity to the bone enhancing the quality of osseointegration. The lattice provides crevices, in which the biological tissue can jump in and cling. The combination of these factors is pushing ossification beyond its natural limits. Therefore, the quality and speed of the ossification and osseointegration in and around these Ti–19Nb–14Zr AM laterally closed lattice implants open the possibility of bone spline key of prostheses. This enables the stabilization of the implant into the bone while keeping the possibility of punctual hooks allowing the implant to be removed more easily if required.

Developmental toxicity testing urgently requires the implementation of human relevant new approach methodologies (NAMs) that better recapitulate the peculiar nature of human physiology during pregnancy, especially the placenta and the maternal/fetal interface, which represent a key stage for the human lifelong health. Fit-for-purpose NAMs for the placental-fetal interface are desirable to improve the biological knowledge of environmental exposure at molecular level and to reduce the high cost, time and ethical impact of animal studies. This article reviews the state of the art on the available in vitro (placental, fetal and amniotic cell-based systems) and in silico NAMs of human relevance for developmental toxicity testing purposes, as well as of the available Adverse Outcome Pathways related to developmental toxicity. The OECD TG 414 for the identification and assessment of deleterious effects of prenatal exposure to chemicals on developing organisms will be discussed to delineate the regulatory context and to better debate what is missing and needed in the context of the developmental origins of health and disease hypothesis to significantly improve this sector. Starting from this analysis, the development of a novel human feto-placental organ-on-chip platform will be introduced as an innovative alternative tool for developmental toxicity testing, considering possible implementation and validation strategies to overcome the limitation of the current animal studies and NAMs available in regulatory toxicology and in the biomedical field.

The risk of inhalation exposure to elevated concentrations of hydrogen sulfide (H₂S) and ammonia (NH₃) during the agitation of stored swine manure is high. Once or twice a year, farmers agitate manure before pump-out and application to fields. Agitation of the swine manure causes the short-term releases of highly toxic levels of H₂S and NH₃. In our previous pilot-scale studies, the biochar powder had shown significant mitigation of H₂S and NH₃ emissions when surficially applied to manure immediately before agitation. However, fine biochar powder application poses hazards by itself and may not be practical to apply on a farm scale, especially when livestock and workers are present. We hypothesized that applying pelletized biochar to manure surface is just as effective as applying powder to protect farmers and animals from excessive exposure to H₂S and NH₃. This work reports on the lab-scale proof-of-the-concept trials with biochar pellets on the lab-scale. The objective was to compare the biochar pellets and biochar powder on their effectiveness of mitigation on H₂S and NH₃ gases during 3-hour long swine manure agitation. Three scenarios were compared in (n=3) trials (i) control, (ii) 12.5 mm thick surficial application to manure surface of biochar powder, and (iii) an equivalent (by mass) dose of pelletized biochar applied to manure surface. The biochar powder was bound with 35% (wt) water into ~5 × 10 mm (dia × length) pellets. Biochar powder was significantly (p<0.05) more effective than the biochar pellets. Still, pellets reduced total H₂S and NH₃ emissions by ~72% and ~68%, respectively (p=0.001), compared with ~99% by powder (p=0.001). The maximum H₂S & NH₃ concentrations were reduced from 48.1±4.8 ppm & 1,810±850 ppm to 20.8±2.95 ppm & 775±182 ppm by pellets, and to 22.1±16.9 ppm & 40.3±57 ppm by powder, respectively. These reductions are equivalent to reducing the maximum concentrations of H₂S and NH₃ during the 3-h manure agitation by 57% and 57% (pellets) and 54% and 98% (powder), respectively. Treated manure properties hinted at improved nitrogen retention, yet not significant due to high variability. We recommend scaling-up and trials on the farm-scales using biochar pellets to assess the feasibility of application to large manure surfaces and techno-economic evaluation.

Erythropoietin (EPO) protects cells by inhibiting apoptosis, oxidative stress and inflammation in several models of retinal degeneration. In this study, we demonstrate the effects of recombinant Adeno Associated Virus (AAV) vector-mediated delivery of a modified form of erythropoietin (EPO-R76E) in an established mouse model of dry-AMD in which retinal degeneration is induced by RPE oxidative stress. Experimental vector AAV-EPO-R76E and control vector AAV-GFP were packaged into serotype-1 (AAV1) to enable RPE selective expression. RPE oxidative stress-mediated retinal degeneration was induced by exon specific deletion of the protective enzyme MnSOD (encoded by Sod2) by cre/lox mechanism. Experimental mice received subretinal injection of AAV-EPO-R76E in the right eye and AAV-GFP in the left eye. Western blotting of RPE/Choroid protein samples from AAV-EPO-R76E injected eyes showed RPE specific exogenous protein expression. Retinal degeneration was monitored by electroretinography (ERG). EPO-R76E over-expression in RPE delayed the progressive retinal degeneration as measured by light microscopy in RPE specific Sod2 knockout mice. Delivery of EPO-R76E vector can be used as a tool to prevent retinal degeneration induced by RPE oxidative stress as seen in this mouse model.

Biochar application to the soil can improve soil quality and nutrient leaching loss. Recent studies have reported that surficial application of biochar to stored swine manure can reduce emissions of odorous compounds and reduce the volatilization loss of ammonia. Our working hypothesis was that the biochar-treated manure application to the soil would decrease nutrient leaching from manure and increase plant-available nutrients. The study objectives were to evaluate the impact of biochar-treated swine manure on soil total C, N, and other major and minor nutrients. Three biochars (i) neutral pH red-oak (RO), (ii) highly alkaline autothermal corn (Zea mays) stover (HAP), and (iii) mild acidic Fe-treated autothermal corn stover (HAPE) were incubated with swine manure for a month. The biochar-manure mixture was applied in triplicate to soil columns with application rate determined by the P₂O₅-P content in manure or manure-biochar mixtures after the incubation. The ammonium (NH₄⁺), nitrate (NO₃^-), and reactive P concentrations in soil column leachates were recorded for eight leaching events. Soil properties and plant-available nutrients were compared between treatments and control manure & soil. Manure-(HAP&HAPE) biochar treatments significantly increased soil organic matter (OM) and increased soil total C, N, and improved soil bulk density. Concentrations of KCl-extractable NH₄⁺ and NO₃^- significantly increased in HAPE column leachates during this 4-week study and in the soil after the experiment. A significant reduction in soil Mehlich3 Cu was also observed for the manure-HAPE mixture compared with the control. Overall, the manure-biochar incubation enabled biochar to sorb nutrients from manure, and the subsequent manure-biochar mixture application to soil improved soil quality and plant nutrient availability in comparison to conventional manure application to soil. This proof-of-the-concept study suggests that biochars could be used to solve both environmental and agronomic challenges and further improve the sustainability of animal and crop production agriculture.

In recent years, poly (ADP-ribose) polymerase (PARP) inhibitors have heen evaluated for treating homologous recombination-deficient tumors, taking advantage of synthetic lethality. However, increasing evidence indicates that PARP proteins exert several cellular functions unrelated with their role on DNA repair, including function as a co-activators of transcription through protein-protein interaction with E2F1. Since the RB/E2F1 pathway is among the most frequently mutated in many tumours types, we investigated whether the absence of PARP activity could counteract the consequences of E2F1 hyperactivation. Our results demonstrate that genetic ablation of Parp1 extends the survival of Rb-null embryos, while genetic inactivation of Parp1 results in reduced development of pRb-dependent tumors. Our results demonstrate that PARP1 plays a key role as a transcriptional co-activator of the transcription factor E2F1, an important component of the cell cycle regulation. Furthermore, impairment of PARP results in a reduction of tumor growth, that is not depending of the activity of PARP on DNA repair. Considering that most oncogenic processes are associated with cell cycle deregulation, the disruption of this PARP1-E2F1 interaction could provide a new therapeutic target of great interest and a wide spectrum of indications.

Manganosalen complexes are coordination compounds that possess a chelating salen-type ligand, a class of bis-Schiff bases obtained by condensation of salicylaldehyde and a diamine. They may act as catalytic antioxidants mimicking both the structure and the reactivity of the native antioxidant enzymes active site. Thus, manganosalen complexes have shown to exhibit superoxide dismutase, catalase, and glutathione peroxidase activities, and they could potentially facilitate the scavenging of excess ROS, thereby restoring the redox balance in the damaged cells and organs. Initial catalytic studies compared the potency of these compounds as antioxidants in terms of rate constants of the chemical reactivity against ROS, giving catalytic values approaching and even exceeding that of the native antioxidative enzymes. Although most of these catalytic studies lack of biological relevance, subsequent in vitro studies have confirmed the efficiency of many manganosalen complexes in oxidative stress models. These synthetic catalytic scavengers, cheaper than natural antioxidants, have accordingly attracted intensive attention for the therapy of ROS-mediated injuries. The aim of this review is to focus on in vivo studies performed on manganosalen complexes and their activity on the treatment of several pathological disorders associated with oxidative damage. This disorders, ranging from the prevention of fetal malformations to the extension of lifespan, include neurodegenerative, inflammatory and cardiovascular diseases, tissue injury, and other damages related to liver, kidney or lungs.

Industrial pig farming is associated with negative technological pressure on the bodies of pigs. Leg weakness and lameness are the sources of significant economic loss in raising pigs. Therefore, it is important to identify predictors of limb condition. This work presents assessments of the state of limbs using indicators of growth and meat characteristics of pigs based on machine learning algorithms. We have evaluated and compared the accuracy of prediction for several ML classification algorithms (Random Forest, K-Nearest Neighbors, Artificial Neural Networks, C50Tree, Support Vector Machines, Naive Bayes, Generalized Linear Models, Boost, and Linear Discriminant Analysis) and have identified the Random Forest and K-Nearest Neighbors as the best performing algorithms for predicting pig leg weakness using a small set of simple measurements that can be taken at an early stage of animal development. Muscle Thickness, Back Fat amount, and Average Daily Gain serve as significant predictors of conformation of pig limbs. Our work demonstrates the utility and relative ease of using machine learning algorithms to assess the state of limbs in pigs based on growth rate and meat characteristics.

Parkinson’s disease (PD) is the most common cause of movement disorder characterized by the progressive loss of dopaminergic neurons in the substantia nigra. It is increasingly recognized as a complex group of disorders presenting widely heterogenous symptoms and pathology. Except for the rare monogenic forms, the majority of the PD cases result from an interaction between multiple genetic and environmental risk factors. The search for these risk factors and the development of preclinical animal models are in progress hand in hand, providing mechanistic insights into the pathogenesis of PD. This review summarizes the studies that capitalize on modeling sporadic (i.e. non-familial) PD using Drosophila melanogaster and discuss their methodology, new findings and future perspective.

While referral-level medicine is important in the veterinary curriculum, students also need a solid base knowledge of clinically relevant routine surgery and diagnostic skills. Veterinary hospitals must maintain a steady caseload that provides wellness cases and commonly encountered conditions. Shelter Medicine programs can create the opportunities to meet these challenges. Students can gain quantifiable surgical experience in spay/neuter with measured growth in surgical efficiency and competency while providing needed community service for animal shelters. Students can directly interact with shelter animals by performing examinations, diagnostic testing, and development of treatment protocols and recommendations for commonly encountered problems. Furthermore, students can obtain a working knowledge of biosecurity on a population level to minimize risk of infectious diseases spreading to healthy populations.

The peroxiredoxin (PRDX) family, a new family of proteins with a pivotal antioxidative function, is ubiquitously synthesized and abundantly identified in various organisms. In contrast to the intracellular localization of other family members (PRDX1/2/3/5/6), PRDX4 is the only known secretory form and protects against oxidative damage by scavenging reactive oxygen species in both the intracellular (especially the endoplasmic reticulum) compartments and the extracellular space. Recently, we generated unique human PRDX4 (hPRDX4) transgenic (Tg) mice on a C57BL/6J background and investigated the critical and diverse protective roles of PRDX4 against diabetes mellitus, atherosclerosis, insulin resistance, and nonalcoholic fatty liver disease (NAFLD) as well as evaluated its role in the intestinal function in various animal models. Our published data have shown that PRDX4 helps prevent the progression of metabolic syndrome by reducing local and systemic oxidative stress and synergistically suppressing steatosis, inflammatory reactions, and/or apoptotic activity. These observations suggest that Tg mice may be a useful animal model for studying the relevance of oxidative stress on inflammation and the dysregulation of lipid/bile acid/glucose metabolism upon the progression of human metabolic syndrome, and that specific accelerators of PRDX4 may be useful as therapeutic agents for ameliorating various chronic inflammatory diseases.

The Source Region of the Yellow River (SRYR), renowned as the "Water Tower of the Yellow River", serves as an important water conservation domain in the upper reaches of the Yellow River, significantly influencing water resources within the basin. Based on the Weather Research and Forecasting (WRF) Model Hydrological modeling system (WRF-Hydro) model, the key variables of the atmosphere-land-hydrology coupling processes over the SRYR during the 2013 rainy season are analyzed. The investigation involves a comparative analysis between the coupled WRF-Hydro and the standalone WRF simulations, focusing on the hydrological response to the atmosphere. The results reveal that the WRF-Hydro model's proficiency in depicting streamflow variations over the SRYR, yielding a Nash Efficiency Coefficient (NSE) of 0.44 and of  0.61 during the calibration and validation periods, respectively. Compared to the standalone WRF simulations, the coupled WRF-Hydro model demonstrates enhanced performance in soil heat fluxes simulations, reducing the mean Root Mean Square Error (RMSE) of surface soil temperature by 0.96 K and soil moisture by 0.01 m\textsuperscript{\textsuperscript{3}}/m\textsuperscript{\textsuperscript{3}}. Furthermore, the coupled model adeptly captures the streamflow variation characteristics with the NSE of 0.33. This underscores the significant potential of the coupled WRF-Hydro model for delineating coupled atmosphere-land-hydrology processes in regions characterized by cold climates and intricate topography.

Robotic odor source localization (OSL) is a technology that enables mobile robots or autonomous vehicles to find an odor source in unknown environments. An effective navigation algorithm that guides the robot to approach the odor source is the key to successfully locating the odor source. While traditional OSL approaches primarily utilize an Olfaction-only strategy, guiding robots to find the odor source by tracing emitted odor plumes, our work introduces a fusion navigation algorithm that combines both vision and olfaction-based techniques. This hybrid approach addresses challenges such as turbulent airflow, which disrupts olfaction sensing, and physical obstacles inside the search area, which may impede vision detection. In this work, we propose a hierarchical control mechanism that dynamically shifts the robot’s search behavior among four strategies: crosswind maneuver, Obstacle-avoid Navigation, Vision-based Navigation, and Olfaction-based Navigation. Our methodology includes a custom-trained deep-learning model for visual target detection and a moth-inspired algorithm for Olfaction-based navigation. To assess the effectiveness of our approach, we implemented the proposed algorithm on a mobile robot in a search environment with obstacles. Experimental results demonstrate that our Vision and Olfaction Fusion algorithm significantly outperforms Vision-only and Olfaction-only methods, reducing average search time by 54% and 30%, respectively.

Although solar photovoltaic (PV) system costs have declined, capital cost remains a barrier to widespread adoption. Do-it-yourself (DIY) system designs can decrease costs by about 50% by reducing labor costs, but if not attached to a building structure demand ground penetration for conventional footings. This is not technically and economically feasible at all sites. To overcome these challenges, this study details systems designed to eliminate drilling holes and pouring concrete. Two different designs for both fixed tilt and variable tilt PV racking are investigated to assess their structural integrity, constructability, and economic cost when fabricated with a ballast-supported foundation. The ballast-supported foundations are analyzed for eight such systems by proposing two separate ballast designs: one for single line of post systems, and one for double line of post systems built on a 4-kW basis. The results of the analysis found that both designs are slightly more expensive than typical in-ground concrete systems by 25%, but the overall DIY systems costs remain economically advantageous. Sensitivity analyses are conducted to show how modifications to the dimensions including clearances and distances between gabions influence the weight of the system and thus change the economic value of the design, so users can trade dimensional freedom for cost-savings, and vice versa. Overall, all the wood-based PV racking system designs provide users with cost-effective and easy DIY alternatives to conventional metal racking, and the novel ballast systems presented provide more versatility for PV systems installations.

This article aims to assess the benefits of floor-slab insulation measures using extruded polystyrene (XPS) and polyisocyanurate (polyiso) insulation materials at various levels of insulation thicknesses for a detached residential building. The EnergyPlus simulation analysis was carried out within the seven energy zones (represented by eight locations) of South Africa in accordance with the South African national code for building energy efficiency (SANS10400-XA). The energy savings and payback periods due to use of the insulation over a lifecycle period of 50 years were assessed. Cape Town (zone 4) behaved differently from other locations and hardly benefitted from the application of floor-slab insulation measures. Generally, polyiso insulation performed better than XPS, for vertical gap insulation. For vertical gap insulation, lower insulation thicknesses required higher insulation depths to maximize energy savings. Similarly, lower insulation thicknesses required higher perimeter insulation widths to maximize energy savings, for the horizontal perimeter insulation method. The locations that benefitted most from vertical gap floor-slab insulation were Pretoria (zone2), Kimberley (zone6), Nelspruit (zone3), Fraserburg (zone7), Welkom (zone1), Mthatha (zone5), Ixopo (zone5H) and Cape Town (zone4) in that order. This order was almost similar with those for the horizontal perimeter floor-slab insulation and horizontal full floor-slab insulation methods.

The RHAPS project was launched in 2019 with the major objective to identify specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS, and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g. number size distributions, refractory chemical components, elemental composition,) and low-time resolution analyses (e.g. oxidative potential, toxicological assays, chemical composition,…). Preliminary results show a high complexity in the relations observed, the link between air quality and toxicological endpoints being not obvious. We explore data from different points of view: source apportionment of PM1 and the role of source emissions on aerosol toxicity, the oxidative potential as a predictive variable for PM1 toxicity with focus on the secondary organic aerosol possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity. We provide a synthesis of results with the outlook to companion papers where data are analyzed in more detail.

One of the biggest problems that the Dominican Republic has had in recent decades is the efficient management of solid waste produced by the population. This problem has worsened in recent years due to the decrease in available areas for the construction of sanitary landfills, the lack of recycling culture in the population, the deficiency in waste collection, and the scarce legal controls aimed at preserving water and air and soil, among other factors. The objective of this study was to explore the management of solid waste by the population and the municipality of Puñal, province of Santiago, to evaluate and analyze the situation and generation of solid waste, municipal solid waste management services, and the attitudes of the population regarding recycling projects and waste management, to evaluate the viability and sustainability of the use organic waste for energy generation. A total of 275 households from 29 localities in the municipality of Puñal were surveyed, which allowed for a significant population sample. According to the results obtained, the most significant type of waste produced by families is organic waste, followed by plastic waste and paper. Of the total organic waste produced in the municipality, 53% of solid waste is disregarded through the municipal waste collection system, while 47% is used as plant fertilizers or animal feed. On the other hand, most households receive the municipal waste collection service and pay for this service. The results of our research show that the implementation of an energy production system based on organic waste would be viable in the municipality of Puñal. However, a more efficient waste collection system would be necessary and the development of programs and projects that allow all households to participate in the system.

Scintillators play a key role in the detection chain of several applications which rely on the use of ionizing radiation, and it is often mandatory to extract and detect the generated scintillation light as efficiently as possible. In positron emission tomography (PET), for example, both energy resolution and coincidence resolving time, two of the key detection parameters, depend strongly on the total amount of light which reaches the photodetector surface as well as its spatial and temporal distribution. Typical inorganic scintillators do however feature a high index of refraction, which impacts light extraction efficiency in a negative way. Furthermore, several applications such as preclinical PET rely on pixelated scintillators with small pitch. In this case, applying reflectors on the crystal pixel surface, as done conventionally, can have a dramatic impact of the packing fraction and thus the overall system sensitivity. This paper presents a study on light extraction techniques, as well as combinations thereof, for two of the most used inorganic scintillators (LYSO and BGO). Novel approaches, employing distributed Bragg reflectors (DBRs), metal coatings, and a modified Photonic Crystal (PhC) structure, are described in detail and compared with commonly used techniques. The nanostructure of the PhC is surrounded by a hybrid organic/inorganic silica sol-gel buffer layer which ensures robustness while maintaining its performance unchanged. We observed in particular a maximum light gain of about 41% on light extraction and 21% on energy resolution for BGO, a scintillator which has gained interest in the recent past due to its prompt Cherenkov component and lower cost.

We suppose that vacuum is filled with a kind of continuously distributed matter which may be called the $\Omega(1)$ substratum, or the electromagnetic aether. Suppose that the time scale of a macroscopic observer is very large compares to the the Maxwelllian relaxation time of the $\Omega(1)$ substratum. Thus, the macroscopic observer concludes that the $\Omega(1)$ substratum behaves like a Newtonian-fluid. Inspired by H. A. Lorentz, we speculate that electric charges may be extremely small hard spherical sources or spherical sinks with finite radii. Based on the spherical source and spherical sink model of electric charges, we derive Coulomb's law of interactions between static electric charges in vacuum. Further, we derive a reduced form of the Lorentz's force law for static electric charges in vacuum.

Using the Yellow-River-Source National Park (YRSNP) as a study site, an unmanned aerial vehicle (UAV) remote sensing and line transect method was used to investigate the number of wild herbivorous animals and livestock, including the kiang (Equus kiang) and Tibetan gazelle (Procapra picticaudata). A downscaling algorithm was used to generate the forage yield data in YRSNP based on 30 m spatial resolution. On this basis, we estimated the forage–livestock balance, which included both wild animals and livestock, and analyzed the effects of functional zone planning in national parks on the forage–livestock balance in YRSNP. The results showed that the estimates of large herbivore population numbers in YRSNP based on population density in the aerial sample strips, which were compared and validated with statistical data and warm season survey results, indicated that the number of kiangs and Tibetan gazelles in the 2017 cold season was 12900 and 12100, respectively. The number of domestic yaks, Tibetan sheep, and horses was 53400, 76800, and 800, respectively, and the total number of sheep units was 353200. The ratio of the number of large wild herbivores and livestock sheep units was 1:5; Large wild herbivores have different preferences for functional zones, preferring ecological restoration areas consisting mainly of degraded grassland; The grazing pressure indices of the core reserve areas and ecological restoration areas were 0.168 and 0.276, respectively, indicating that these two regions still have high grazing potential. However, the grazing pressure index of the traditional utilization areas was 1.754, indicating that these grasslands are severely overloaded; After the planning and implementation of functional zones, the grazing pressure index of YRSNP was 1.967. Under this measure, the number of livestock was not reduced and the grazing pressure nearly doubled, indicating that forage–livestock conflict has become more severe.

Huge amounts of chitin and chitosans can be found in the biosphere as important constituent of the exoskeleton of many organisms, as well as waste by worldwide seafood companies. Nowadays, politicians, environmentalists, and industrialists encouraged the use of these marine polysaccharides as renewable source, particularly when developed by alternative eco-friendly processes, especially in the production of regular cosmetics. The aim of this review is to outline the physicochemical and biological properties and the different bioextraction methods of chitin and chitosans sources, focusing on enzymatic deproteinization, bacteria fermentation, and enzymatic deacetylation methods. Thanks to their biodegradability, non-toxicity, biocompatibility, and bioactivity, the application of these marine polymers is widely used in the contemporary manufacturing of biomedical and pharmaceutical products. In the end, advanced cosmetic products based on chitin and chitosans are presented, analyzing different therapeutic aspects about skin, hair, nail, and oral care. The innovative formulations described can be considered as excellent solutions regarding problems in the various body anatomical sectors.

The success of source protection in ensuring safe drinking water is centered around being able to understand the hazards present in the catchment then plan and implement control measures to manage water quality risk to levels which can be controlled through downstream barriers. The programs in place to manage source protection are complex sociotechnical systems involving policy, standards, regulators, technology, human factors and so on. This study uses System Theoretic Process Analysis (STPA) to analyze the operational hazards of a typical drinking water source protection (DWSP) program and identify control measures to ensure safe operations. To validate the results a questionnaire was developed and distributed to specialists in DWSP in Taiwan, Australia and Greece. Using Principle Components Analysis (PCA) of the questionnaire responses, the study identified four critical success factors (CSFs) for DWSP. The four factors identified are ‘Policy and Government Agency Support of Source Protection’, ‘Catchment Risk Monitoring and Information’, ‘Support of Operational Field Activities’ and ‘Response to Water Quality Threats’. The results of this study provide insight into the approach of grouping of source protection measures to identify a series of targeted CSF for operational source protection programs. Using CSF can aide catchment management agencies in ensuring that the risk level in the catchment is managed effectively and that threats to public health from drinking water are managed appropriately.

The XChem facility at Diamond Light Source offers fragment screening by X-ray crystallography as a general access user program. The main advantage of X-ray crystallography as a primary fragment screen is that it yields directly the location and pose of the fragment hits, whether within pockets of interest or merely on surface sites: this is the key information for structure-based design and for enabling synthesis of follow-up molecules. Extensive streamlining of the screening experiment at XChem has engendered a very active user programme that is generating large amounts of data: in 2017, 36 academic and industry groups generated 35,000 datasets of uniquely soaked crystals. It has also generated a large number of learnings concerning the main remaining bottleneck, namely obtaining a suitable crystal system that will support a successful fragment screen. Here we discuss the practicalities of generating screen-ready crystals that have useful electron density maps, and how to ensure they will be successfully reproduced and usable at a facility outside the home lab.

In recent years, the Canadian dairy sector has faced escalating challenges due to its significant contribution to greenhouse gas emissions, particularly methane. This paper critically examines a spectrum of innovative techniques aimed at mitigating methane emissions within this sector, scrutinizing their cost-effectiveness, efficiency, compatibility with animal welfare standards, and adherence to both existing and prospective Canadian environmental legislations. The discourse commences with an exhaustive overview of contemporary methane reduction methodologies pertinent to dairy farming, followed by a rigorous analysis of their economic feasibility. This includes a detailed cost-benefit analysis, juxtaposed with the efficiency and technological advancements these techniques embody. A pivotal aspect of this examination is the alignment of animal welfare with emission reduction objectives, ensuring that strategies employed do not compromise the health and well-being of dairy cattle. Furthermore, the paper delves into the legislative landscape of Canada, evaluating the congruence of these techniques with current environmental laws and anticipating future regulatory shifts. Performance indicators for emission reduction are critically assessed, establishing benchmarks tailored to the Canadian context. This is complemented by an exploration of the market potential of these innovations, including factors influencing their adoption and scalability in the market. The analysis culminates with a synthesis of case studies and best practices within Canada, offering insights into successful implementations and drawing lessons for future endeavors. This comprehensive approach serves not only to address the immediate environmental and health impacts associated with dairy farming emissions but also contributes significantly to the overarching goal of sustainable development in the agricultural sector.

Background: With continuous advances in next-generation sequencing (NGS), novel hepadnaviruses have been discovered in many species over the last 10 years. Methods: In this study, the cloud search and analysis of NGS data published in Nature by Edgar et al. was used as a basis to re-mine and reanalyze public NGS data for new hepadnaviruses. Results: Ultimately, at least 41 new species of hepadnaviruses were identified, including hepadnaviruses from the model animals hamster and mouse, frog hepadnavirus with pan-species infectivity, and diverse African cichlid hepadnaviruses that circulate within populations. Conclusions: The discovery of the new species of hepadnaviruses not only provides new clues for the study of the origin and evolution of hepadnaviruses, but also can be used to construct new hepadnavirus animal infection models, which will be helpful for the research of eradicative drugs for hepatitis B virus (HBV).

The Developing Countries Vaccine Manufacturing Network coordinated a multi-laboratory study funded by the US National Institute for Innovation in Manufacturing Biopharmaceuticals to assess the performance of the Pertussis Serological Potency Test (PSPT) in the laboratories of seven whole-cell pertussis vaccine (wP) manufacturers and three National Control Laboratories based in Southeast Asian countries. To this end, common protocols for the immunization of mice and serological testing by ELISA were shared with all laboratories. Each laboratory used their own wP vaccines and the reference vaccine routinely used in the regulatory required mouse protection test (MPT) and assayed the products both in the MPT and PSPT. Whereas in all laboratories the PSPT showed decreased serum IgG levels after immunization with sub-potent compared to potent final batches, some issues were encountered during execution of the assay, which prevented drawing of definitive conclusions on assay performance. Nevertheless, the study provided the participants with the opportunity to familiarize themselves with the PSPT protocols and revealed the next steps to be addressed for implementation of the method.

The aim of this study was to evaluate the effect of dietary supplementation with Olea europaea L. extract on the animal welfare and milk quality of lactating Italian Holstein-Friesian dairy cows at different calving orders. Cows in mid lactation phase received, for 60 days, the natural olive extract Phenofeed Dry® (500 mg/cow/day) with high antioxidant power. Hormonal and metabolic parameters were determined through ELISA assays, the milk fatty acid profile through gas chromatography, chemical-nutritional and hygienic-sanitary parameters through ultrasonic analyses. The milk lysozyme content was measured through a specific ELISA assay. The administration of the enriched feed did not alter the hormonal balance. Primiparous cows were more sensitive to the treatment and showed a better general health status compared to other calving orders. The enriched feed resulted in a reduction of saturated fatty acids (SFAs) and an increase of monounsaturated fatty acids (MUFAs) and polyunsaturated fatty acids (PUFAs), ensuring an adequate nutritional content and, above all, a significantly higher content of the antibacterial protein, lysozyme. Overall, our study demonstrate that the inclusion of natural bioactive molecules such as Olea europaea L. polyphenols contributes to improving the welfare status of dairy cows and ensuring high nutritional and functional quality of animal productions.

Sepsis is a life-threatening organ dysfunction caused by a dysregulated host response to infection, with septic cardiomyopathy being a common and severe complication. Despite its significant clinical impact, the molecular mechanisms underlying sepsis-induced cardiomyopathy (SICM) remain incompletely understood. In this study, we performed a comparative analysis of whole transcriptome profiles in two widely used mouse models of septic cardiomyopathy, the cecal ligation and puncture (CLP) model and the lipopolysaccharide (LPS) model. Our aim was to identify key genes and pathways involved in the development of septic cardiomyopathy and to evaluate the similarities and differences between the two models. Our findings suggested that 1) both methods can induce septic heart dysfunction within 24 hours; 2) distinct whole transcriptome expression profiles are revealed; 3) potentially different pathways are involved in causing heart failure in sepsis. The comprehensive comparison provides valuable insights into the molecular basis of septic cardiomyopathy and contributes to the ongoing search for effective treatment strategies, triggered by different factors for SICM.

Drones equipped with thermal cameras have recently become readily available, broadening the possibilities for monitoring wildlife. The European hare (Lepus europaeus) is a nocturnal mammal that is closely monitored in Denmark due to populations declining since the mid-1900s. The limitations of current population assessment methods, such as spotlight counts and hunting game statistics, could be overcome by relying on drone surveys with thermal imaging for population counts. The aim of this study was to investigate the use of a DJI Mavic 2 Enterprise Advanced drone with thermal imaging as a tool for monitoring the Danish hare population. Multiple test flights were conducted over agricultural areas in Denmark in spring 2022, testing various flight altitudes, camera settings, and recording methods. The test flights were used to suggest a method for identifying and counting hare. The applied use of this methodology was then evaluated through a case survey that had the aim of identifying and counting hare over an agricultural area of 242 ha. Hare could be detected with thermal imaging at flight altitudes up to 80 m and it was possible to fly as low as 40 m without observing direct behavior changes. Thermal images taken at these altitudes also provided enough detail to differentiate between species and animal body size proved to be a good species indicator. The case study confirmed the use of thermal imaging based drone surveys to identify hare and conduct population counts, thus, indicating the suggested methodology as a viable alternative to traditional counting methods.

Background: When we talk about zoonoses, it is undeniable that we have a human and animal population that has been isolated in studies over time. Besides human and animal health, zoonoses also impact the economy and society. Therefore, the integration of the analysis in this area is essential to optimize resources in public health decisions. We have new challenges in public health that we need to overcome in a more comprehensive method such as One Health. For better measures in public health, the dual burden of zoonoses seems a logical way to determine the integral impact of such diseases in society and thus take better measures to prevent and reduce the impact of these diseases. Methods: We follow the guidelines for “Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA). We search human and animal zoonoses on Embase, Ovid Medline, Scopus, Web of Science, and Google Scholar, from an unrestricted period until November 2021. For the search, we consider the Disability Adjusted Life Years (DALYs) for the human zoonotic burden and the animal zoonotic burden in monetary terms. A librarian collaborates to optimize the search string for the databases, and two reviewers screen eligible articles (first by title, then by abstracts, and finally, by full-text assessment.) For the analysis, we aim to convert the burden of zoonoses of all selected studies into the zoonotic Disability Adjusted Life Years (zDALYs) – including the human and animal components. Discussion: The study results will provide information on published studies that have accounted for the dual burden of zoonoses (both human and animal health aspects.) In addition, the synthesis of the available literature will address the knowledge gap in this area in order to know to what extent it is possible to convert the burden of human zoonoses to the animal burden of zoonoses and integrate them into a more comprehensive approach (dual burden of zoonoses.)

COVID-19 affects many organs in our body, including the heart and lungs. COVID-19 cases that require hospitalization often exhibit pulmonary hypertension (PH) due to changes in the lung microvasculature in which the blood vessels become stiff, damaged, or narrow, causing increased pulmonary arterial pressure. This review examines the hypothesis that PH can lead to right ventricular hypertrophy (RVH) as a long-lasting aftereffect of COVID-19. Recent studies have shown that significant percentages of hospitalized patients develop right ventricular hypertension and right ventricular dilatation (RVD), which may lead to right ventricular failure and death. Despite recommendations for echocardiogram reports to include right ventricular wall thickness to assess RVH, few published reports have reported this parameter. Relevant studies on animal models of PH in which the timing of PH can be precisely controlled suggest that one to three weeks of PH can cause RVH. Thus, according to the hypothesis proposed here COVID-19 patients who have long-lasting severe disease (e.g., needed to be on a ventilator for one or more weeks) accompanied by PH and RVD may develop RVH as a long-lasting sequela outlasting the infection itself. Echocardiogram studies of recovered COVID-19 patients may determine whether oft-reported cardiovascular sequelae include RVH.

Testing in animals is mandatory in drug testing and the gold standard for evaluation of toxicity. This situation is expected to change in the future because the 3Rs principle, which stands for replacement, reduction and refinement of the use of animals in science, is reinforced by many countries. On the other hand, technologies for alternatives to animals experiments have increased. The necessity to develop and use of alternatives is influenced by the complexity of the research topic and also by the fact, to which extent the currently used animal models can mimic human physiology and/or exposure. Rodent lung morphology and physiology differs markedly for that of humans and inhalation exposure of the animals are challenging. In vitro and in silico methods can assess important aspects of the in vivo action, namely particle deposition, dissolution, action at and permeation across the respiratory barrier and pharmacokinetics. Out of the numerous homemade in vitro and in silico models some are available commercially or open access. This review discusses limitations of animal models and exposure systems and proposes a panel of in vitro and in silico techniques that, in the future, may replace animal experimentation in inhalation testing.

The use of swine manure as a source of plant nutrients is one alternative to synthetic fertilizers. However, conventional manure application with >90% water and a low C:N ratio results in soil C loss to the atmosphere. Our hypothesis was to use biochar as a manure nutrient stabilizer that would slowly release nutrients to plants upon biochar-swine manure mixture application to soil. The objectives were to evaluate the impact of biochar-treated swine manure on soil total C, N, and plant-available macro and micronutrients in greenhouse-cultivated corn (Zea mays L.) and soybean (Glycine max (L.) Merr.). Neutral pH red oak (RO), highly alkaline autothermal corn stover (HAP), and mild acidic Fe-treated autothermal corn stover (HAPE) biomass were pyrolyzed to prepare biochars. Each biochar was surface-applied to swine manure at a 1:4 (biochar wt/manure wt) ratio to generate mixtures of manure and respective biochars (MRO, MHAP, and MHAPE). Conventional manure (M) control and manure-biochar mixtures were then applied to the soil at a recommended rate. Corn and soybean were grown under these controls and treatments (S, M, MRO, MHAP, and MHAPE) to evaluate the manure-biochar impact on soil quality, plant biomass yield, and nutrient uptake. Soil OM significantly (<0.05) increased in all manure-biochar treatments; however, no change in soil pH or N was observed under any treatment. No difference in soil ammonium between treatments was identified. There was a significant decrease in soil M3-P and soil NO₃^- for all manure-biochar treatments compared to the conventional M. However, the plant biomass nutrient concentrations were not significantly different from control manure. Moreover, an increasing trend of N and decreasing trend of P in the plant under all biochar-manure treatments than the controls were noted. This observation suggests that the presence of biochar is capable of influencing the soil N and P in such a way as not to lose those nutrients at the early growth stages of the plant. In general, no statistical difference in corn or soybean biomass yield and plant nutrient uptake for N, P, and K was observed. Interestingly, manure-biochar application to soil significantly diluted the M3-extractable soil Cu and Zn concentrations. The results attribute that manure-biochar has the potential to be a better soil amendment than conventional manure application to the soil.

Background: The use of animal models for biomedical research provides us with a convenient and feasible route to establish causal relationships by recapitulating the temporal sequence of events in a controlled environment with a potential to manipulate the variables at multiple levels including genetic, protein, physiological or environmental. Objectives: The current review was conducted to gain insights into various animal models for the SARS-CoV-2 virus. Material and Methods: A literature review (PUBMED, PUBMED Central, PMC, Google Scholar, Google search engine) following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines performed in early April 2020 revealed 9 articles of interest. Search terms included covid 19, covid-19, novel corona virus, SARS-CoV-2, animal models, experimental models, laboratory models & covid 19 animal models. Two independent reviewers extracted the data; the third reviewer was involved in case of discrepancy. Results: SARS-CoV-2 shares an identical receptor binding domain with the SARS-CoV virus and has a superior binding affinity to the host ACE2. Based on this, the role of rhesus macaques, golden Syrian hamsters, transgenic hACE2 mice and ferrets as animal models have been studied. All four animals are susceptible to infection with SARS-CoV-2 with variable clinical presentation but universal recovery. The respiratory tract is primarily involved in all four models. Involvement of intestines was also seen in at least one study in each animal. Transfer to naïve animals in close contact has been documented in case of hamsters and ferrets. Seroconversion was documented in all although the role of convalescent sera was tested in hamsters only, with positive results though. Air-borne transmission was documented in ferrets and the possibility of feco-oral transmission was suggested for hamsters. The possibilities of recurrence and re-infection were ruled out by experiments upon the rhesus macaques. The fulfilment of Koch’s postulates has been highlighted. Discussion: The various studies available on animal models have been able to establish models of infection and transmission that recapitulate different aspects of disease in humans. However, the response between different animals and the same animal in different experiments is not completely coherent. Some of them do not manifest the disease clinically while others behave differently at molecular and immunological levels. Moreover, the physiology of these animals is not identical to human beings and the findings may not be extrapolated to human beings in an ‘as-is’ manner. Conclusions: The review acknowledges the achievements made by these experiments in a short span of time and highlighted the urgent need for a deeper dive in search of a quintessential animal model which can be studied for efficacy and safety of newer drugs and vaccines before a make-shift from the petri-dish to the human body can be contemplated.

Over the years influenza B virus (IBV) contribute annual disease and can lead to serious respiratory disease among humans. More attention should be paid to the mammalian adaptive processes of B viruses and development of vaccines against current influenza. Because of preclinical trials of anti-influenza drugs are conducted mainly on mice, we developed adequate animal model using antigenically-relevant IBV strain for testing anti-influenza drugs and protective efficacy of flu vaccines. We serially passaged Victoria lineage (clade 1A) IBV 17 times in BALB/c mice. The adaptive amino acid substitutions were found in HA (T214I) and NA (D432N). By the electron microscopic examination, we showed spherical and elliptical shapes of IBV. Light microscopy showed that mouse-adapted B virus caused influenza pneumonia on day 6 post inoculation. We evaluated the illness pathogenicity, viral load and histopathological features of mouse-adapted IBV and estimated anti-influenza drugs and vaccine efficiency in vitro and in vivo. Assessment of investigational anti-influenza drug oseltamivir ethoxisuccinate and flu vaccine Ultrix® revealed effectivity against our mouse-adapted influenza B virus.

There is an important role non-human primates (NHP) play in biomedical research. Phylogenetic proximity of any of the NHP species to Homo sapiens assures that much better translatability of research outcomes from model studies involving human diseases can be achieved than from those generated with other pre-clinical systems. Our group and others used during past two decades NHPs in research directed towards viral and autoimmune disorders of the gastrointestinal tract. This review summarizes progress made in the area of enteric viral infections and its applicability to human disease.

Next-generation sequencing is now a mature technology, allowing partial animal genomes to be produced for many clades. Though many software exist for genome assembly and annotation, a simple pipeline that allows researchers to input raw sequencing reads in fastq format and allow the retrieval of a completely assembled and annotated mitochondrial genome is still missing. mitoMaker 1.0 is a pipeline developed in python that implements (i) recursive de novo assembly of mitochondrial genomes using a set of increasing k-mers; (ii) search for the best matching result to a target mitogenome and; (iii) performs iterative reference-based strategies to optimize the assembly. After (iv) checking for circularization and (v) positioning tRNA-Phe at the beginning, (vi) geneChecker.py module performs a complete annotation of the mitochondrial genome and provides a GenBank formatted file as output.

Feline immunodeficiency virus (FIV) is a naturally-occurring retrovirus that infects domestic and non-domestic feline species, producing progressive immune depletion that results in an acquired immunodeficiency syndrome (AIDS). Much has been learned about FIV since it was first described in 1987, particularly in regard to its application as a model to study the closely related lentivirus, human immunodeficiency virus (HIV). In particular, FIV and HIV share remarkable structure and sequence organization, utilize parallel modes of receptor-mediated entry, and result in a similar spectrum of immunodeficiency-related diseases due to analogous modes of immune dysfunction. This review summarizes current knowledge of FIV infection kinetics and mechanisms of immune dysfunction in relation to opportunistic disease, specifically in regard to studying HIV pathogenesis. Furthermore, we present data which highlight changes in the oral microbiota and oral immune system during FIV infection, and outline the potential for the feline model of oral AIDS manifestations to elucidate pathogenic mechanisms of HIV-induced oral disease. Finally, we discuss advances in molecular biology, vaccine development, neurologic dysfunction, and the ability to apply pharmacologic interventions and sophisticated imaging technologies to study experimental and naturally occurring FIV, which provide an excellent, but often overlooked resource for advancing therapies and management of HIV/AIDS.

The technical feasibility of solar photovoltaic (PV) direct current (DC) nanogrids are well-established, but the components of nanogrids are primarily commercially focused on alternating current (AC)-based systems. Thus, DC converter-based designs at the system level require personnel with high degree of technical knowledge and this results in high costs. To enable a democratization of the technology by reducing the costs this study provides a novel modular plug-and-play open source DC nanogrid. The system can be customized according to consumer requirements, enabling the supply of various voltage levels to accommodate different device voltage needs. The step-by-step design process of the converter, controller, data logger, and assembly of the complete system is provided. A time-domain simulation and stability analysis of the designed system were conducted in MATLAB/Simulink as well as experimental validation. The results show transforming the nanogrid from a distribution network to a device makes it suitable for various user-specific applications, such as remotely supplying power to campsites, emergency vehicles like ambulances, and small houses lacking grid electricity. The modular DC nanogrid includes all the features available in a DC distribution network as well as data logging, which enhances the user experience and promotes the use of solar-powered DC grid systems.

Urban air pollution is a critical global environmental issue, necessitating an understanding of the spatiotemporal characteristics and driving factors for effective environmental protection and urban planning. This study introduced an advanced air quality assessment system that integrates environmental, socio-economic, and urban layout factors, addressing gaps in traditional models that often overlook the impact of urban spatial structures. Analyzing air quality data from Beijing's main urban area (2016-2020) alongside multi-source geographic data, the research develops a comprehensive evaluation system, incorporating 14 key driving factors. Employing Geographically Weighted Regression (GWR) and Multi-scale Geographically Weighted Regression (MGWR), the study quantitatively assessed the influence and spatial heterogeneity of these factors. Findings revealed an annual improvement in air quality, with a U-shaped seasonal pattern and significant spatial clustering (Global Moran’s I = 0.922). The MGWR model, in particular, provided a superior fit over GWR, effectively capturing the spatial variability of factors. Variables such as NDVI), economic output (GDP), and humidity space adjustment capability (HSAC) showed significant positive spatial impacts on air quality, while population density (POP), temperature (TEMP), and road density (RD) exhibited negative effects. These insights enhance the understanding of air pollution dynamics and aid in refining urban planning strategies.

Enclosed public spaces are the hotspots for airborne disease transmission. To measure and maintain indoor air quality in terms of airborne transmission, an open source, low cost and distributed array of Particulate Matter Sensors has been developed and named as Dynamic Aerosol Transport for Indoor Ventilation or DATIV system. This system can use multiple Particulate Matter Sensors (PMS) simultaneously and can be remotely controlled using a Raspberry Pie based operating system. The data acquisition system can be easily operated using the GUI within any common browser installed on a remote device such as a PC or Smartphone with corresponding IP address. The software architecture and validation measurements are presented together with possible future developments.

The ordinary 3D wave equation for nondissipative, homogeneous, isotropic media admits solutions where the point sources are permitted to move, but it does not admit solutions where the receiver is allowed to move. To overcome this limitation, the new wave equation is derived, permitting both the receiver and the source to move. This new wave equation is a generalization of the standard wave equation, and it reduces to the standard wave equation when the receiver is at rest. To derive this new wave equation, we first mathematically define a diverging spherical wave caused by the stationary point source. From this purely mathematical definition, the wave equation for the stationary source and the moving receiver is derived together with the corresponding free-space Green's function. Utilizing the derived Green's function, it was shown that this new wave equation also permits the solutions where both the receiver and the source are permitted to move. In conclusion, this paper demonstrates that, instead of an ordinary wave equation, the wave equation for the moving source and the moving receiver governs the waves emitted by the moving point sources and received by the moving receivers.

Soy leghemoglobin (LegH) has been gaining interest over the last years as an efficient flavor and aroma compound in plant-based meat substitutes. Hence, in the following article we demonstrate the methods for LegH production using a recombinant Komagataella phaffii strain. Multiple fed-batch fermentation with an alternative to BSM medium, where glucose was used as the main carbon source, were implemented and the growth kinetics, e.g., maximal specific biomass growth - 0.239 g·g−1·h−1, biomass yield from substrate - 0.298 g·g−1 and maximal specific substrate consumption rate - 0.81 g·g−1·h−1, were identified. Leghemoglobin production resulted in a yield of 0.513 mg·gDCW 1, while the highest biomass density achieved in the study was 121.80 gDCW·L 1. The applied medium showed potential for additional optimization studies, as in contrast to BSM, made it possible to separate pH control from nitrogen supply, does not affect medium turbidity measurements and does not induce metabolite synthesis during yeast biomass growth.

Power converter technologies have become increasingly vital in various applications due to their efficient management of electrical energy. With the growing prominence of renewable energy sources like solar and wind, the high penetration of power electronic converters has been justified. However, ensuring power quality has emerged as a significant challenge for grid-connected power converters. The divergence from the ideal sinusoidal waveform in terms of magnitude and frequency impacts both grid-side currents and voltages. Several studies have proposed solutions to address power quality issues at the load side. The advancement of power converters has been fueled by the development of high-performance microprocessors and the emergence of high-speed switching devices, such as SiC-MOSFETs. This paper focuses on the design of voltage source converters, particularly those based on SiC-MOSFET semiconductor devices. The article presents the design of H-Bridge cells, discusses two-level voltage source converters based on cascade H-Bridge cells in parallel configuration with experimental fault analysis, addresses the seven-level voltage source converters topology, and explores the design and experimental results of the matrix converter. The findings underscore the importance of considering the entire converter design for improved performance at high switching frequencies. The article concludes by summarizing the main outcomes and implications of this research.

The most common source of transformer failure is in the insulation, and the most prevalent warning signal for insulation weakness is partial discharge (PD). Locating positons of these partial discharges would help repair the transformer to prevent failures. This work investigates algorithms that could be deployed to locate the position of a PD event using data from ultra-high frequency (UHF) sensors inside the transformer. These algorithms typically proceed in two steps: first determine the signal arrival time and then locate the position based on time differences. This paper reviews available methods for each task and then propose new algorithms: a convolutional iterative filter with thresholding (CIFT) to determine the signal arrival time and a reference table of travel times to resolve the source location. The effectiveness of these algorithms are tested with a set of laboratory-triggered PD events and two sets of simulated PD events inside transfers in production use. Tests show the new approach provides more accurate locations than the best-known data analysis algorithms, and the difference is particularly large, 3.7X, when the signal sources are far from sensors.

ME/CFS (Myalgic Encephalomyelitis / Chronic Fatigue Syndrome) is a chronic, complex, heterogeneous disease that affects millions and lacks both diagnostics and treatments. Big data, or the collection of vast quantities of data that can be mined for information, has transformed the understanding of many complex illnesses like cancer (1,2) and multiple sclerosis (3,4), by dissecting heterogeneity, identifying subtypes, and enabling the development of personalized treatments. It is possible that big data can reveal the same for ME/CFS. Solve M.E. developed and launched the You + ME Registry to collect longitudinal health data from people with ME/CFS, people with Long COVID (LC) and control volunteers using rigorous protocols designed to harmonize with other groups collecting data from similar groups of people. The Registry is an invaluable resource because it integrates with a symptom tracking app, as well as a biorepository, to provide a robust and rich dataset that is available to qualified researchers. Accordingly, it facilitates collaboration that may ultimately uncover causes and help accelerate the development of therapies.

Although distributed additive manufacturing can provide high returns on investment the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by 3-D printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here provides for precise controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built and tested for its ability to provide high tolerance thermopolymer pellets from a number of sizes capable of being used in a FGF printer. In addition, the chopping pelletizer is tested for its ability to chop multi-materials simultaneously for color mixing and composite fabrication as well as precise fractional measuring back to filament. The US$185 open-source 3-D printable pelletizer chopper system was successfully fabricated and has a 0.5 kg/hr throughput with one motor, and 1.0 kg/hr throughput with two motors using only 0.24 kWh/kg during the chopping process. Pellets were successfully printed directly via FGF and indirectly after being converted into high-tolerance filament in a recyclebot.

A multi-decadal change analysis of the irrigation ponds in Taoyuan, Taiwan was conducted by using multi-source data including digitized ancient maps, declassified single-band CORONA satellite images, and multispectral SPOT images. Supervised LULC classifications were conducted using four textural features derived from the single-band CORONA images and spectral features derived from SPOT images. Post-classification analysis revealed that the number of irrigation ponds in the study area decreased during the post-World War II farmland consolidation period (1945 – 1965) and the subsequent industrialization period (1970 – 2000). However, efforts on restoration of irrigation ponds in recent years have resulted in gradual increases in the number (9%) and total area (12%) of irrigation ponds in the study area.

The aim of this work was to determine if the development of low-cost or no-cost finite element analysis (FEA) software has advanced to the point where it can be used in place of trusted commercial FEA packages for linear static structural analyses using isotropic material models. Nonlinear structural analysis will be covered in a separate paper. Several suitable packages were identified, these underwent a process of systematic elimination when they were unable to meet the minimum imposed qualitative criteria. Three packages were chosen to be subjected to performance benchmarking, namely: Code_Aster/Salome Meca; Mecway and Z88 Aurora. SimScale, a browser-based analysis package was included as well because it met all the baseline criteria and has the potential to offer a completely cloud-based approach to computer aided engineering, potentially reshaping the way an engineering business views its operational capabilities. This paper presents the test cases and simulation results for packages that fall under the linear static structural analysis type.

After a local pollution control plant significantly reduced phosphorus loading into a phytoplankton-dominated tributary of the Potomac River in the early 1980’s, water quality and biological communities were monitored bi-weekly from April-September. After a 10-year time-lag, submerged aquatic vegetation (SAV), once abundant in this freshwater tidal embayment, returned to the area in 1993. After additional reductions in nitrogen load starting in 2000, the system completely switched to a SAV-dominated state in 2005. Fish abundance didn’t change during these distinct phase changes, but the fish community structure did. Increases in SAV provided refuge and additional spawning substrate for species with adhesive eggs such as Banded Killifish (Fundulus diaphanus), which is now the most abundant species in the embayment. Other changes seen were a decrease in the relative contribution of open water dwelling species such as White Perch (Morone americana), and an increase of visual predators such as Largemouth Bass (Micropterus salmoides). The 30-year record of data from this Potomac River tributary has revealed many important long-term trends that validate the effectiveness of initiatives to improve water treatment, and will aid in the continued management of the watershed and point source inputs.

Scaffold guided breast tissue regeneration (SGBTR) can both transform reconstructive and cosmetic breast surgery. Implant-based surgery is the most common method. However, there are inherent limitations as there is replacement of tissue rather than regeneration. Regenerating autologous soft tissue has the potential to provide a more like-for-like reconstruction with minimal morbidity. Our SGBTR approach regenerates soft tissue by implanting additively manufactured bioresorbable scaffolds filled with autologous fat graft. A pre-clinical large animal study was conducted implanting 100 ml breast scaffolds (n=55) made from medical-grade polycaprolactone in 11 minipigs for 12 months. Various treatment groups were investigated where immediate or delayed autologous fat graft, as well as platelet rich plasma were added to scaffolds. Computed Tomography and Magnetic Resonance Imaging was performed on explanted scaffolds to determine volume and distribution of regenerated tissue. Histological analysis was performed to confirm tissue type. At 12 months we were able to regenerate and sustain a mean soft tissue volume of 60.9 4.5 ml (95% CI) across all treatment groups. There was no evidence of capsule formation. There were no immediate or long-term post-operative complications. In conclusion, we were able to regenerate clinically relevant soft tissue volumes utilizing SGBTR in a pre-clinical large animal model.

Alzheimer’s disease (AD) poses a significant public health challenge due to its irreversible and progressive nature while lack of a cure. As a potential strategy to combat AD, its prevention becomes increasingly attractive. Mild Cognitive Impairment due to AD (MCI-AD) represents a critical transitional stage between normal age-related cognitive decline and more severe AD conditions, occurring just before dementia onset. Unfortunately, there is currently no established animal model that accurately recapitulates MCI-AD characteristics. While many laboratories have traditionally used normally aged wild-type animals as experimental models, this approach falls short in representing the inherently worse state of MCI-AD compared to normal aging. To address this gap, we introduce an animal model—a transgenic mouse line with genetic inactivation of G protein-coupled receptor kinase-5 (GRK5), commonly known as the GRK5 knockout (GRK5KO) mouse. These GRK5KO mice exhibit amnesia, cognitive deficits, increased β-amyloid levels, neurofibrillary tangle (NFT) immunopositive axonopathy, and hippocampal neurodegenerative changes. Importantly, these pathological alterations predominantly impact the entorhinal, transentorhinal, and hippocampal cortices, aligning with human MCI-AD criteria and Braak stage II of human AD progression. Notably, female GRK5KO mice show approximately 2.5 times more NFT-positive axonopathy than males, mirroring the higher prevalence of AD cases in women. Collectively, existing data strongly supports the GRK5KO mouse as a qualified animal model for studying MCI-AD.

Because it can make exact double-strand breaks in DNA, CRISPR-Cas9 can help almost every species and type of cell. It is a powerful way to change the DNA code. CRISPR-Cas9 can be used for a lot more than just changing genes. We are close to being able to do high-throughput gene screening, epigenome editing, in-vivo cell tagging, and RNA change. With the help of CRISPR-Cas9, the function of genes can be studied better, and more realistic disease models can be made. The revolutionary new discipline of gene editing has the potential to profoundly impact healthcare and the life sciences. By simplifying the process of creating double-strand breaks in the DNA of almost any species or kind of cell, CRISPR-Cas9 has revolutionized gene editing. Numerous applications have been found for the CRISPR-Cas9 system. High-throughput gene screening, RNA modification, live-cell chromosome marking, and epigenome editing are all examples. CRISPR-Cas9 facilitates gene research, leading to the development of CRISPR-based disease models. CRISPR-Cas9-based methods of altering the genome will aid researchers in learning more about sickness and discovering better ways to cure it, despite the fact that there are still many questions and large difficulties to answer.

Abstract: The glucocorticoid receptor (GR), including both alternative spliced isoforms (GRa and GRb), has been implicated in the development of primary open-angle glaucoma (POAG) and iatrogenic glucocorticoid-induced glaucoma (GIG). POAG is the most common form of glaucoma, which is the leading cause of irreversible vision loss and blindness in the world. Glucocorticoids (GCs) are commonly used therapeutically for ocular and numerous other diseases/conditions. One serious side effect of prolonged GC therapy is the development of iatrogenic secondary ocular hypertension (OHT) and OAG (i.e. GC-induced glaucoma (GIG)) that clinically and pathologically mimics POAG. GC-induced OHT is caused by pathogenic damage to the trabecular meshwork (TM), a tissue involved in regulating aqueous humor outflow and intraocular pressure. TM cells derived from POAG eyes (GTM cells) have lower expression of GRb, a dominant negative regulator of GC activity, compared to TM cells from age-matched control eyes. Therefore, GTM cells have a greater pathogenic response to GCs. Almost all POAG patients develop GC-OHT when treated with GCs, in contrast to a GC responder rate of 40% in the normal population. Increased expression of GRb can block GC-induced pathogenic changes in TM cells and reverse GC-OHT in mice. Endogenous expression of GRb in the TM may relate to differences in the development of GC-OHT among the normal population. A number of studies have suggested increased levels of endogenous cortisol in POAG patients as well as differences in cortisol metabolism, suggesting that GCs may be involved in the development of POAG. Additional studies are warranted to better understand the molecular mechanisms involved in POAG and GIG in order to develop new disease modifying therapies to better treat these two sight threatening forms of glaucoma.

Low-intensity noisy galvanic vestibular stimulation (nGVS) can improve static and dynamic postural deficits in patients with bilateral vestibular loss (BVL). In this study, we aimed to explore the neurophysiological and neuroanatomical substrates underlying nGVS treatment effects in a rat model of BVL. Regional brain activation patterns and behavioral responses to repeated 30-min nGVS treatment in comparison to sham stimulation were investigated by serial whole-brain [18F]-FDG-PET measurements and quantitative locomotor assessments before and at 9 consecutive time points up to 60 days after chemical bilateral labyrinthectomy (BL). [18F]-FDG-PET revealed a broad nGVS-induced modulation on regional brain activation patterns encompassing biologically plausible brain networks in the brainstem, cerebellum, multisensory cortex and basal ganglia during the entire observation period post-BL. nGVS broadly reversed brain activity adaptions occurring in the natural course post-BL. Parallel behavioral locomotor assessment demonstrated a beneficial treatment effect of nGVS on sensory-ataxic gait alterations, particularly in the early stage of post-BL recovery. Stimulation-induced locomotor improvements were finally linked to nGVS brain activity responses in the brainstem, hemispheric motor and limbic networks. In conclusion, combined [18F]-FDG-PET and locomotor analysis discloses the potential neurophysiological and neuroanatomical substrates that mediate previously observed therapeutic nGVS effects on postural deficits in patients with BVL.

Although domestic cats are susceptible to infection with SARS-CoV-2, the role of the virus in causing feline disease is less well defined. We conducted a large-scale study to identify SARS-CoV-2 infections in UK pet cats, using active and passive surveillance. Remnant feline respiratory swab samples, submitted for other pathogen testing between May 2021 and February 2023, were screened using RT-qPCR. In addition, we appealed to veterinarians for swab samples from cats suspected of having clinical SARS-CoV-2 infections. Bespoke testing for SARS-CoV-2 neutralising antibodies was also performed, on request, in suspected cases. One RT-qPCR-positive cat was identified from the active surveillance (1/549, 0.18 %), during the Delta wave (1/175, 0.57 %). Passive surveillance detected one cat infected with the Alpha variant, and two of ten cats tested RT-qPCR-positive during the Delta wave. No cats tested RT-qPCR-positive after the emergence of Omicron BA.1 and its descendants although 374 were tested by active and eleven by passive surveillance. We describe four cases of SARS-CoV-2 infection in pet cats, identified by RT-qPCR and/or serology, that presented with a range of clinical signs, as well as their SARS-CoV-2 genome sequences. Our results demonstrate that, although uncommon, clinical infections in cats can and do occur.

The rabbit is a popular animal model for human biomechanical research involving surgery at the hind limb. General anesthesia in rabbits is associated with significantly higher mortality rates than in dogs and cats. In addition, as prey animals, rabbits tend to mask signs of pain, making early detection particularly difficult. Regional anaesthesia, as an adjunct to general anaesthesia, may markedly reduce the need for systemic anaesthetic and analgesic drugs, limiting their associated side effects. In other species, a block of the sciatic (ScN) and the femoral nerves (FN) is usually applied in patients undergoing hind limb surgery. In phase 1 of this study, the ScN and the FN have been localized and an appropriate approach under sonographic guidance has been evaluated. In phase 2, a mixture of methylene blue and lidocaine have been administered to the ScN and the FN in 10 cadavers (20 hind limbs). Staining of the nerves was evaluated by dissection. Ultrasonographically, the ScN appeared as a binocular structure surrounded by a hyperechoic rim. The FN appeared as a hypoechoic structure in the dorsal part of the IPM, becoming hyperechoic/honey-comb-like in the ventral part. Both nerves could be successfully stained in all animals over a median length of 2.3 cm which was considered effective. This technique allows a feasible and accurate access to block of the ScN and the FN and may lead to successful analgesia in rabbits undergoing hind limb surgery.

Large animal experiments are important for preclinical studies of regenerative stem cell transplantation therapy. Therefore, we investigated the differentiation capacity of pig skeletal muscle-derived stem cells (Sk-MSCs) as an intermediate model between mice and humans for nerve muscle regenerative therapy. Enzymatically extracted cells were obtained from green-fluorescence transgenic micro-mini pigs (GFP-Tg MMP) and sorted as CD34+/45- (Sk-34) and CD34-/45-/29+ (Sk-DN) fractions. The ability to differentiate into skeletal muscle, peripheral nerve, and vascular cell lineages was examined by in vitro cell culture and in vivo cell transplantation into the damaged tibialis anterior muscle and sciatic nerves of nude mice and rats. Protein and mRNA levels were analyzed using RT-PCR, immunohistochemistry, and immunoelectron microscopy. The myogenic potential, which was tested by Pax7 and MyoD expression and the formation of muscle fibers, was higher in Sk-DN cells than in Sk-34 cells but remained weak in the latter. In contrast, the capacity to differentiate into peripheral nerve and vascular cell lineages was totally stronger in Sk-34 cells. In particular, Sk-DN cells did not engraft to the damaged nerve, whereas Sk-34 cells showed active engraftment and differentiation into perineurial/endoneurial cells, endothelial cells, and vascular smooth muscle cells, similar to the human case, as previously reported. Therefore, we concluded that Sk-34 and Sk-DN cells in pigs were closer to those in humans than to those in mice.

We describe a recently developed approach to quantify welfare loss in animals, the Cumulative Pain metric. It combines the two most relevant dimensions of negative affective experiences: intensity and duration. The metric enables estimating the time individuals spend in negative affective states of a physical or psychological nature (operationally referred to simply as ‘pain’) of different intensities as the result of one or more challenges (e.g., diseases, injuries, deprivations). A new notation protocol (the Pain-Track) is used in which the duration of the experience is represented along the horizontal axis and intensity is represented by four categories in the vertical axis. Pain experiences are partitioned into temporal segments, where hypotheses for the experienced duration and intensity are proposed based on existing welfare indicators (e.g., neurophysiological, behavioral, anatomical, evolutionary). This structure forces transparency about assumptions and uncertainties, highlights knowledge gaps, and enables estimates to be continuously adjusted. Because the Cumulative Pain metric is based on parameters with a broadly common biological meaning, it provides the much needed interoperability among assessments of animal welfare. It enables comparing the impact of practices and living conditions, policies and interventions, and the calculation of welfare footprints of animal-sourced products using a universal measurement unit.

Studies on the influence of dietary components and their effects are fundamental for nutrigenomics, or the study of how nutrients can be cellular sensors, how they affect biological processes and gene expression in different tissues. Lipids are an important source of fatty acids (FA) and energy and are fundamental to biological processes and influence the regulation of transcription. Pigs are excellent model to study nutrigenomics, particularly lipid metabolism because the deposition and composition of FA in their tissues reflect the composition of FA in their diet. Recent studies show that FA supplementation is important in production systems, such as growing and finishing pigs, as it can improve the energy value of the feed, help reduce costs, improve animal welfare, and influence the nutritional value of the meat. Studies show that oleic (OA), linoleic (LA), docosahexaenoic (DHA), and eicosapentaenoic (EPA) acids are associated with the regulation of transcription in tissues such as muscle, liver, adipose tissue, and brain. Other studies indicate that EPA and DHA are associated with changes in specific signaling pathways, altering gene expression and biophysical properties of membranes. This review, therefore, focuses on the current knowledge of the effects of dietary FA on production traits and gene expression.

Proper treatment of infectious air could potentially mitigate the spread of airborne viruses such as porcine reproductive and respiratory syndrome virus (PRRSV). The objective of this research is to test the effectiveness of ultraviolet (UV) in inactivating aerosolized PRRSV, specifically, four UV lamps, UV-A (365 nm, both fluorescent and LED-based), "excimer" UV-C (222 nm), and germicidal UV-C (254 nm), were tested. The two UV-C lamps effectively irradiated fast-moving PRRSV aerosols with short treatment times (<2 s). One-stage and two-stage UV inactivation models estimated the UV doses needed for target percentage (%) reductions on PRRSV titer. UV-C (254 nm) dose needed for 3-log (99.9%) reduction was 0.521 and 0.0943 mJ/cm2, respectively, based on one-stage and two-stage models. An order of magnitude lower UV-C (222 nm) doses were needed for a 3-log reduction, i.e., 0.0882 and 0.048 mJ/cm2, based on one-stage and two-stage models, respectively. However, the cost of 222-nm excimer lamps is still economically prohibitive for scaling-up trials. The UV-A (365 nm) lamps could not reduce PRRSV titers for tested doses up to 4.11 mJ/cm2. Pilot-scale or farm-scale testing of UV-C on PRRSV aerosols simulating barn ventilation rates are recommended based on its effectiveness and reasonable costs comparable to HEPA filtration.

Post-concussion syndrome, recently recognized as a complication of mild traumatic brain injury, is considered a consequence of the summative effect of multiple concussions received over lifetime. In elderlies, the main mild brain trauma mechanism is fall (low impact force). Many falls are often not reported or noticed but may generate serious medical and medico-legal consequences. Our research question was to find if a single, very mild brain trauma can induce neuro-behavioral consequences in elderlies. One database was queried (PubMed – MeSH terminology) looking for histopathological, neuro-cognitive and behavioral changes that can be generated by sub-concussional trauma in senescent rodents, in comparison with young animals. 41 published research articles were selected. 17 of them used very mild brain trauma in young and senescent animals, in the same experiment (6 rats and 11 mice). 24 articles evaluated the effect of sub-threshold brain trauma in adult animals (no control group). Five trauma models were used (blast models were excluded). Neuro-inflammatory changes were detected immediate after very mild primary impact. In young animals, observed pathology disappeared fast (after 3 to 7 days). Increased apoptosis, mild axonal injury in white matter tracts plus maladaptive astrogliosis and microglial activation was stronger in aged animals, persisted over time (8 months) and significantly altered animals’ cognition and behavior. Associated preexisting pathology (hypertension, tau protein deposits, microbleeds, reactive inflammation) was often responsible for amplification of the primary impact results. As translation of observation is the weak spot of pathology and behavior animal research, further investigation is needed before to conclude that even a single, very mild brain trauma may have medical consequences on human senescent brain.

Animals, with their complex and obligate multicellularity, evolved from microbial eukaryotes that were likely obligately or facultatively unicellular. The nature of the unicellular progenitors of animals has intrigued biologists since the late 19^th century, coinciding with the parallel spread of the cell theory and the theory of evolution. However, views on the ancestry of animals have been extremely varied. The huge diversity of single-celled organisms, the tremendous plasticity of animal cellular phenotypes, and the difficulties of organizing both into clear phylogenies in the pre-molecular era allowed a wide range of hypotheses to flourish, with nearly every major single-celled lineage, at one time or another, having been proposed as the precursor of animals. Most of these hypotheses never gained followers beyond their originator (such as the ideas that animals evolved directly from either bacteria, Volvox or fungi) and will not be discussed here. Three concepts, however, have been enduring and influential: (1) the amoeboid theory; (2) the flagellate theory; and the (3) the ciliate theory – to which a fourth category can now be added: (4) a mixed model, in which the ancestor was phenotypically plastic. We will discuss their origin, history, and current relevance.

Background: Animal-assisted therapy has positive effects on cognitive function, depression, performance ability, and social functioning in elderly patients. The aim of this study was to evaluate the effects of rearing pet insects on the cognitive function of healthy elderly participants, with fMRI (functional magnetic resonance imaging) being used for this purpose. Methods: Community-dwelling elderly women (≥60 years) with normal cognitive function were enrolled during April 2015. They were randomized at a 1:1 ratio into two groups: insect-rearing and control (n=16) groups, with the insect-rearing group being further classified into two groups for analysis according to the subjects’ scores in the Wisconsin Card Sorting Test, WCST) at the first fMRI: insect-rearing group I with a relatively high score (n=13), and insect-rearing group II with a relatively low score (n=6). All subjects were educated on a healthy lifestyle for better cognitive function at every visit, and the insect-rearing groups received and reared crickets as pet insects. The fMRI was performed at baseline and after 8 weeks using the WCST as a stimulus. The WCST consisted of two variations, a high level baseline (HLB) and semi-WCST version. Results: There were no significant differences in the baseline characteristics among the three groups. There was a significant difference accuracy of the HLB–semi-WCST (p<0.05) in insect-rearing group II after 8 weeks from the baseline test. In the fMRI analysis involving the WCST reaction test, increased activation was observed in the right dorsal lateral prefrontal cortex and parietal cortex in insect-rearing group II when the semi-WCST, rather than the HLB, was performed. There were no significant differences in the other groups. Conclusion: The rearing of pet insects as an animal-assisted therapy is cost-effective, easy, and occupies little space. In this study, it showed positive effects on executive functions and performance improvement in elderly women. Further larger studies on the effects of pet insects on cognitive function are warranted.

Fusing data from many sources helps to achieve higher results of analysis. In this work, we present a new algorithm to fuse data from multiple cameras with data from multiple lidars. This algorithm was developed to increase the sensitivity and specificity of autonomous vehicle perception systems, where the most accurate sensors measuring the vehicle’s surroundings are cameras and lidar devices. Perception systems based on data from one type of sensor do not use complete information and have lower quality. The camera provides two-dimensional images; lidar produces three-dimensional point clouds. We developed a method for matching pixels on a pair of stereoscopic images using dynamic programming inspired by an algorithm to match sequences of amino acids used in bioinformatics. We improve the quality of the basic algorithm using additional data from edge detectors. We also improve the algorithm performance by reducing the size of matched pixels determined by available car speeds. We perform point cloud densification in the final step of our method, fusing lidar output data with stereovision output. We implemented our algorithm in C++ with Python API, and we provided the open-source library named Stereo PCD. This library very efficiently fuses data from multiple cameras and multiple lidars. In the article, we present the results of our approach to benchmark databases in terms of quality and performance. We compare our algorithm with other popular methods.

Open-source 3-D printing has played a pivotal role in revolutionizing the additive manufacturing (AM) landscape, by making distributed manufacturing economic, democratizing access, and fostering far more rapid innovation than antiquated proprietary systems. Unfortunately, some 3-D printing manufacturing companies began deviating from open-source principles and violating licenses for the detriment of the community. To determine if a pattern has emerged of companies patenting clearly open-source innovations, this study presents three case studies from the three primary regions of open-source 3-D printing development (EU, U.S. and China) as well as three aspects of 3-D printing technology (AM materials, an open-source 3-D printer, and core open-source 3-D printing concepts used in most 3-D printers). The results of this review have shown that non-inventing entities called patent parasites are patenting open-source inventions already well-established in the open source community and in the most egregious cases commercialized by one (or several) firms at the time of the patent filing. Patent parasites are able to patent open-source innovations by using a different language, vague patent titles and broad claims that encompass enormous swaths of widely diffused open-source innovation space. This practice poses a severe threat to innovation and several approaches to irradicate the threat are discussed.

This study presents the numerical investigation of bioconvective nanofluid (NF) flow compris-ing gyrotactic microorganisms through convective boundary conditions (CBC) enclosing heat and mass transmission analysis above an inclined extending cylinder. Via appropriate transfor-mation, the set of Partial Differential Equations is transformed into a scheme of nonlinear ODEs. A new set of variables are presented in the directive to get the first-order convectional equations and, then solved numerically by using bvp4c. The influence of several factors on velocity, ener-gy, concentration, and the density of motile microorganisms (DMM) is investigated and exam-ined. The analysis describes and addresses all physical measures of concentration such as Skin Friction (SF), Sherwood number (SN), DMM, and Nusselt number (NN). The present conse-quences display a validation with published. For confirmation of bvp4c, the ND-solve approach is also applied. Error analysis is also examined for the confirmation of the mathematical model.

The research is devoted to the problem of noise generation during flights of supersonic civil aircrafts. The effect of a thermally stratified energy source used to control the flow past a pointed cylinder aerodynamic models on the nearfield and ground pressure signatures, as well as on the perceived loudness in decibels (PLdB) on the ground is evaluated. The fields of parameters and the dynamics of the drag forces are studied for different values of temperature in the layers of the thermally stratified energy source and for different number of layers in it. It has been shown that when performing the flow control at freestream Mach numbers 1.5-2 using thermally stratified energy sources with the number of layers from 2.5 to 7.5 and rarefaction parameters in the layers from 0.15 to 0.3, no additional noise impact on the ground is introduced. Thus, the simulations showed that changing the surface pressure signature due to drag reduction does not necessarily imply a change in the PLdB on the ground.

Candida boidinii NAD+-dependent formate dehydrogenase (CbFDH) has gained significant attention for its potential applications in the production of biofuels and various industrial chemicals from inorganic carbon dioxide. In this study, we present an atomic X-ray crystal structure of the apo CbFDH to 1.4 Å resolution determined at cryogenic temperature at the Turkish Light Source, “Turkish DeLight”. This structure offers a comprehensive view of the apo enzyme's dynamics, filling the gaps in our understanding from previous studies. Also, comparison of our high-resolution apo and previously available holo enzyme structures reveals major conformational changes of this dynamic enzyme in the absence and presence of the coenzyme and substrate/inhibitor complexes. Collectively all these information may provide invaluable insights into future protein engineering efforts that could enhance enzymatic activity and stability, potentially increasing its efficiency and effectiveness of CbFDH in industrial processes.

Demand response flexible loads can provide fast regulation and ancillary services as reserve capacity in power systems. This paper proposes a joint optimization dispatch control strategy for source-load system with stochastic renewable power injection and flexible thermostatically controlled loads (TCLs) and plug-in electric vehicles (PEVs). Specifically, the optimization model is characterized by a chance constraint look-ahead programming to maximal the social welfare of both units and load agents. By solving the chance constraint optimization with sample average approximation (SAA) method, the optimal power scheduling for units and TCL/PEV agents can be obtained. Secondly, two demand response control algorithms for TCLs and PEVs are proposed respectively based on the aggregate control models of the load agents. The TCLs are controlled by its temperature setpoints and PEVs are controlled by its charging power such that the DR control objective can be fulfilled. The effectiveness of the proposed dispatch and control algorithm has been demonstrated by the simulation studies on a modified IEEE 39 bus system with a wind farm, a photovoltaic power station, two TCL agents and two PEV agents.

The simultaneous evaluation of heat/mass transference procures momentous significance in the polymer industry and engineering activities. Extensive utilization of such aspects includes propylene flares, heat exchangers, energy transfiguration in chilling towers, and amputation of post fortuitous heat in nuclear reactors. Owing to such prospective demands, we interpreted the Jeffrey liquid reactive flow under non-linear convection. We scrutinized the transference of heat/mass under generalized Fourier-Fick relations. Thermal conductivity depends on temperature while mass diffusivity is dependent on concentration. Besides, heat source along with first-order chemical reaction aspects are accounted for. Relevant transformations are exerted to achieve non-linear differential systems that are solved through the homotopy scheme. Influences of divers factors are exhibited via graphical benchmark.

We previously reported new superconductivity produced by an electrostatic field and a diffusion current in a semiconductor without refrigeration. In particular, the superconductivity was investigated theoretically and confirmed experimentally. Here, we determine that the derived superconducting quantum state can be reproduced in a capacitor. When circuits are formed with this new-type capacitor and diodes, a magnetic field is applied to the diodes’ depletion layer. The depletion layer is biased because of the conversion from the magnetic-field energy to electric-field energy, resulting in the diodes’ spontaneously emitting a current. Thus, the new-type capacitor is charged using no other energy source. This new phenomenon is described theoretically with assistance of initial experiments.

Studying hydro-meteorological factors variations and its links to large-scale atmospheric circulation systems can facilitate the understanding of the hydrological processes and sustainable water resources management in the source region of the Yangtze River (SRYR). Currently, researches mostly focused on the temporal and spatial variation characteristics in hydro-meteorological factors; however, researches on the hydro-meteorological variations and its links to large-scale atmospheric circulation systems in the SRYR are scarce. Based on long-term hydro-meteorological and reanalysis data, this research investigated multiscale variations of hydro-meteorological factors and its links to large-scale atmospheric circulation characteristic indices during 1957~2012 in the SRYR. The results showed that the amounts of streamflows and precipitation in the SRYR declined during the 1990s. Since the 2000s, the amounts of streamflows and precipitation had increased significantly climate in the SRYR. The change trends of precipitation and streamflows in the SRYR are synergetic at annual and seasonal scales, and have three significant periods, namely 3~5 years, 15–20 years and 30–40 years. The South Asia monsoon (SAM) plays a relatively more important role in the hydro-meteorological factors changes in the SRYR. The relative contributions of SAM to streamflows and precipitation changes were 83.6% and 78%, respectively. During the driest (wettest) year, the SAM is relatively weak (strong), and brings less (more) southwest airflow into the SRYR, less (more) precipitation and streamflows will be generated in the SRYR.

The scarcity and pollution of freshwater are extremely crucial issues today and the expansion of water reuse have been considered as an option to reduce its impact. This study aims to assess the efficiency of an integrated greywater treatment system and hydroponic lettuce production as a part of a green wall structure and to evaluate the health risk associated with the production and consumption of lettuce through quantitative microbial risk assessment (QMRA) and chemical health risk assessment. The study was conducted based on the unique configuration of source separation system; on-site greywater treatment system; green wall structure as a polishing step; and hydroponic lettuce production in the green wall structure. The final effluent from the system was used to grow three lettuce varieties by adding urine as a nutrient solution. Both water samples and plant biomass were collected and tested for E. coli and heavy metals contamination. The system has gained a cumulative 5.1 log10 reduction of E. coli in the final effluent and no E. coli found in the plant biomass. QMRA results indicated that the system attained the health-based targets, 10–6 DALYs per person per year. Similarly, health risk index (HRI) and targeted hazard quotient (THQ) results did not exceed the permissible level, thus the chemical health risk concern was insignificant.

Memory and emotion, fundamental components of our mental existence, are highly vulnerable to psychiatric disorders like post-traumatic stress disorder (PTSD). This condition has been linked to serotonin (5-HT) metabolism disruptions. Over 95% of the 5-HT precursor tryptophan (Trp) is metabolized through the Trp-kynurenine (KYN) metabolic pathway, but little is known about its role in behavior. Kynurenine aminotransferases are responsible for the production of the Trp-KYN metabolite kynurenic acid. The gene aadat codes for mitochondrial kynurenine aminotransferase isotype 2. We generated CRISPR/Cas9-induced aadat knockout (kat2−/−) mice to examine the consequence of the gene deletion on negative valence in emotion, memory, and motor function in males 8 weeks of age and compared them to their wild-type counterparts. The forced swim test showed increased depression-like behaviors in transgenic mice. Anxiety and memory tests showed no significant differences. The transgenic mice had fewer center field and corner entries, shorter ambulation distances, and fewer jumping counts in the open field test. Overall, the transgenic mice exhibit depression-like behavior in a learned helplessness model, emotional indifference, and motor deficits. Here we present the first evidence that the deletion of the aadat gene triggers depression-like behaviors, uniquely associated with despair experience rather than adverse-conditioned memory. These findings have profound implications, opening avenues for further exploration into the main causes of experience-based depression linked to despair. This investigation has the potential to advance our understanding of these complex conditions and pave the way for improved therapeutic strategies by elucidating the relationship between Trp metabolism and the pathogenesis of PTSD.