In an effectively managed grazing system, goats as grazers can benefit the land's physical, chemical, biological, and economic aspects. However, little research has evaluated rotational and continuous goat grazing in Kentucky. This observational study investigated the impact of rotational and continuous grazing on forage production and goat performance. One group of 10 does was placed on a rotational pasture, and another group of 10 does were placed on a continuous pasture, each pasture measuring two acres. The pastures were side-by-side with similar forage types and compositions. Goat performance was measured by body weight and eye color score (FAMCHA). Forage production was measured weekly by collecting forage heights at three random spots in each pasture. The rotational grazing field displayed a more evenly grazing pattern, while the continuous field experienced overgrazing in some areas and overgrown of the less desired forage. Goats on the continuous field had a decrease in body weight, while the weights were more consistent in the rotational grazing field. The FAMACHA score was temporarily reduced on the rotational grazing pasture, indicating that properly managed rotational grazing may prevent anemia, possibly by reducing the shedding of gastrointestinal parasites. However, due to drought and lack of forage, the FAMACHA score of goats in the rotational grazing system reverted to its original status by the end, indicating that more extensive management and timely adjustments are necessary to ensure optimal goat performance. Our results suggest that rotational grazing may support more consistent forage yields and body weights of goats and has the potential to reduce the incidence of anemia and parasitic infestations in goats in Kentucky.

AbstraIncorporating knowledge of indigenous forage legumes or associated nutritional attributes in cultivated pastures has the potential to improve grazing conditions, rangeland conditions, and cattle productivity. Climate change and other site-specific factors such as land sizes and other grazing management practices play a significant role in food security, job creation, and environmental health. Several research results have reported that the utilization of forage legumes in most farming systems has proved to increase herbage yield and soil fertility. The major aim of this review is to elucidate the potential benefits of intercropping indigenous forage legumes such as cowpea (Vigna unguiculacta L.Walp) and Dolichols (Lablab purpureaus) intercropped with Chloris gayana, this is to assesses the principal advantages, productivity, and overall performance of forage legumes grown in conjunction with grasses. Moreover, this review seeks to provide insights into the optimal management practices for intercropping forage legumes with grasses. The promising feature of intercropping South African pastoral systems must target the ability of forage legumes in terms of performance and utilization of agro-symbiotic relationships of N2 fixation symbiotic relationship in pastures. Moreover, this review aims also to address this knowledge gap by assessing the effects of defoliation frequency on the biomass production of selected forage legumes when intercropped with Chloris gayana in different growing seasons. By examining how varying defoliation frequencies influence biomass production, this review aimed to provide practical recommendations for optimizing forage management practices and promoting sustainable forage production systems. Through this investigation, we can gain insights into the complex dynamics between the defoliation frequency, intercropping systems, and biomass production.

Bovine Dewclaw Dermatitis (BDCD) is a hoof disease characterized by inflammation of the second and fifth accessory digits and the skin in this region. This pathology is poorly described in the literature; however, it has recently been observed in beef cattle in the Amazon Biome, Brazil. The objective of this study was to identify the epidemiological factors associated with BDCD onset in cattle in the analyzed biome. Samples were collected from eight farms with extensive breeding systems located in Xinguara, Rondon do Pará, Curionópolis, and Ipixuna do Pará, in the state of Pará, Brazil. A total of 706 Nellore and Nellore crossbred with taurine bovine of both sexes were evaluated, with males aged between 2–4 years and a mean weight of 650 kg and females aged between 2–11 years and a mean weight of 400 kg. Distal extremities were inspected during cattle management, and in case of dewclaw lesions, a specific examination was carried out after proper restraint. Bovine were diagnosed with BDCD in all farms analyzed. Of the 706 cattle inspected, 49 (6.94%) showed BDCD, of which 19 (38.77%) were Nellore and 30 (61.22%) were crossbred. This was the first study to determine BDCD’s occurrence in extensive farming systems in the Amazon re-gion, also showing that pastures with large amounts of stumps and stones, the physical structure of pens, and trauma and injury incidence during animal management are the most important pre-disposing factors for the onset of BDCD.

The low and unstable performance is still one of the major obstacles for anaerobic digestion, which provokes researchers to develop some strategies to improve it. In addition to traditional approaches such as co-digestion, pretreatment, and recirculation, some emerging strategies, namely additive and microaeration have also been recognized and developed in recent years due to the update of knowledge. Many studies have evaluated the effect of those strategies on digestion performance. However, it lacks a unified analysis and induction, especially the mechanism for different strategies. Therefore, this review presents a comprehensive view of research progress on the strategies based on latest researches considering five main strategies. Critical think and summary of their mechanism, reactor performance, and availability of those strategies were executed. The results demonstrated that the contribution of microaeration is mainly to balance the composition and activity of hydrolysis, acidogenesis, and methanogenic archaea. Recirculation and co-digestion balance mass and reaction environments. Pretreatment makes the structure of the substrate (such as removing lignin, reducing cellulose crystallinity, and increasing the substrate-specific surface area) more conducive to microbial utilization. The mechanism of the additive strategy varies greatly depending on the type of additive, such as enhancing interspecies electrons transfer through conductive materials, resisting adverse digestion conditions through functional microbial additives, and accelerating nutrient absorption by regulating the bioavailability of trace elements. Although these strategies have different mechanisms for promoting digestion performance, their ultimate goal is to make the parameters of the reactor to an ideal status, and then to achieve a balance among substance, microorganisms and water in anaerobic reactor.

ABSTRACT"In the realm of the industrial complex, a pressing concern lies in optimizing resource utilization and enhancing energy efficiency. This critical issue finds strong support from a variety of government programs, strategies, and regulatory documents. To effectively tackle this challenge and revolutionize petrochemical production, it is imperative to establish and develop innovative mechanisms. One such mechanism involves harnessing the power of automation and advanced Industry 4.0 technologies to streamline production processes. By doing so, we can unlock the full potential of these systems, driving operational efficiency, conserving valuable reserves, and propelling innovation within the petrochemical industry."The article delves into an in-depth analysis of the prominent trends in the application of the "Industry 4.0" concept within the petrochemical industry. It sheds light on the various factors that impact the efficiency of organizing production systems. Additionally, the article identifies the primary avenues that drive the advancement and enhancement of production organization practices. Moreover, the article explores the fundamental tools employed for process improvements and highlights the significance of process automation in petrochemical plants. By examining these key aspects, it aims to provide valuable insights and recommendations for leveraging Industry 4.0 technologies to optimize production processes in the petrochemical industry..The study focuses on examining and evaluating various systems and technologies that contribute to the optimization of production processes within the petrochemical industry. Specifically, it delves into the implementation and benefits of the just-in-time system, the 5S system for workplace rationalization, as well as different information systems including ERP systems and CALS-technologies. By exploring these systems and technologies, the article aims to identify the advantages of automating production processes within the petrochemical complex. This analysis will unveil the potential benefits such as improved efficiency, reduced waste, enhanced productivity, streamlined operations, and increased overall competitiveness. Through this research, we aim to shed light on the value of these automation solutions and their impact on driving the petrochemical industry towards greater success.

The aim of the study was to evaluate the impact of probiotics obtained from agro-industrial substrates fermented with lactic acid bacteria and/or yeasts on the health and changes in the microbiota of the digestive tract of guinea pigs. Eighty male guinea pigs, Kuri breed, 30 days old and 250 g live weight, were randomly selected and divided into four groups of 20 animals each. T0, Control, T1, Lactobacillus acidophilus and L. bulgaricus. T2, Saccharomyces cerevisiae and Kluyveromyces fragilis and T3. L acidophilus, L bulgariccus, S cerevisiae and K. fragilis. T1, T2 and T3 contained molasses-vinasse substrate in their base, the dose administered was 0.75 mL/animal orally. The parameters evaluated were weight gain, occurrence of diarrhea and mortality, blood profile, macroscopic lesions in the digestive tract organs and changes in the microbiota of the stomach, caecum, small and large intestine. Treatments T1, T2 and T3 improved weight gain (p<0.05) and reduced the presence of guinea pigs with diarrhea (p<0.05) and there was no mortality; hematic indices did not vary significantly (p>0.05) between treatments; animals in the control group presented a greater amount (p<0.05) of macroscopic lesions in the digestive tract organs; in the T1, T2 and T3 group there was an improvement in the natural microbiota. It is concluded that the inclusion of microbial additive in young guinea pigs improves intestinal health, consequently, improves weight gain, reduces diarrhea and deaths, and normalizes the natural microbiota of the gastrointestinal tract.

This review article conducts an in-depth analysis of the role of next-generation technologies in soilless vegetable production, highlighting their groundbreaking potential to revolutionize yield, efficiency, and sustainability. These technologies, such as AI-driven monitoring systems and precision farming methods, offer unparalleled accuracy in monitoring critical variables like nutrient concentrations and pH levels. However, the paper also addresses the multifaceted challenges that hinder the widespread adoption of these technologies. The high initial investment costs pose a significant barrier, particularly for small and medium-scale farmers, thereby risking the creation of a technological divide in the industry. Additionally, the technical complexity of these systems demands specialized expertise, potentially exacerbating knowledge gaps among farmers. Ethical considerations are scrutinized, including data privacy concerns and potential job displacement due to automation. Regulatory challenges, such as international trade regulations and policy frameworks, are discussed as they may need revision to accommodate these new technologies. The paper concludes by emphasizing that while these sustainable technologies offer transformative benefits, their potential for broad adoption is constrained by a complex interplay of financial, technical, ethical, regulatory, and social factors. Comprehensive, multi-faceted solutions are therefore essential for their ethical and equitable implementation.

BDD is a hoof disease characterized by inflammation of the second and fifth accessory digits and the skin in this region. This pathology is scarcely described in the literature; however, it has recently been observed in beef cattle in the Amazon Biome region. The objective of this study was to identify the epidemiological factors associated with BDD onset in cattle in the analyzed biome. Samples were collected from eight farms with extensive breeding systems located in Xinguara, Rondon do Pará, Curionópolis, and Ipixuna do Pará, in the state of Pará, Brazil. A total of 706 Nellore and Nellore crossbred with taurine animals of both sexes were evaluated, with males aged between 2–4 years and a mean weight of 650 kg and females aged between 2–11 years and a mean weight of 400 kg. Distal extremities were inspected during cattle management, and in case of accessory digit lesions, a specific examination was carried out after proper restraint. Animals were diagnosed with BDD in all farms analyzed. Of the 706 cattle inspected, 49 (6.94%) showed BDD, of which 19 (38.77%) were Nellore and 30 (61.22%) were crossbred. This was the first study to determine BDD’s occurrence in extensive farming systems in the Amazon region, also showing that pastures with large amounts of stumps and stones, the physical structure of pens, and trauma and injury incidence during animal management are the most important predisposing factors for the onset of BDD.

Vitamin E is a group of eight compounds divided into two subgroups: four tocopherols (α-, β-, γ-, and δ-) and four tocotrienols (α-, β-, γ-, and δ-). α-Tocopherol is considered the most biologically active form. This review paper summarizes the current knowledge and historical progression of vitamin E research, with particular emphasis on its role in animal nutrition. Early studies in the 1920s identified vitamin E’s role in preventing neonatal mortality in rats. Over the following decades, scientists discovered the compound’s chemical structure and its importance for the immune system, skin health, anti-inflammatory properties, hormonal balance, and other bodily functions. Production of vitamin E products has evolved, starting with isolating the vitamin from natural sources and advancing to synthesizing it with greater efficiency and standardized potency units. Early animal studies focused on reproductive health and growth disorders, but further research demonstrated the importance of vitamin E in preventing encephalomalacia in domestic fowl and muscular dystrophy in rabbits and other animals. Today, vitamin E is commonly used as a feed additive to meet animals’ requirements and assure immune function and overall health. Despite much knowledge on vitamin E’s role in animal nutrition, many questions remain unanswered, and current research aims to determine optimal supplementation levels, interactions with other nutrients, impacts on gene expression, cell signaling and communication, and effects of supranutritional dosages in livestock. Vitamin E has a long and fascinating history in scientific research, with significant advancements in understanding its chemical structure and biological activity. In animal nutrition, vitamin E continues to play an important role in improving animal health, and ongoing research will continue to expand our understanding of its benefits and mechanisms of action.

Exercise produces oxidants from a variety of intracellular sources, including NADPH oxidases (NOX) and mitochondria. Exercise-derived ROS are beneficial, and the amount and location of these ROS are important to avoid muscle damage associated with oxidative stress. We discuss here some of the evidence that involves ROS production associated with skeletal muscle contraction and the potential oxidative stress associated with muscle contraction. We also discuss the potential role of H2O2 produced after NOX activation in the regulation of glucose transport in skeletal muscle. Finally, we propose a model based on evidence for the role of different populations of mitochondria in skeletal muscle in the regulation of ATP production upon exercise. The sub-sarcolemmal population of mitochondria has the enzymatic and metabolic components to establish a high mitochondrial membrane potential when fissioned at rest but lacks the capacity to produce ATP; calcium entry to the mitochondria will further increase the metabolic input. Upon exercise, sub-sarcolemmal mitochondria will fuse to intermyofibrillar mitochondria and will transfer the membrane potential to them. These mitochondria are rich in ATP synthase and will subsequentially produce the ATP needed for muscle contraction in long-term exercise. These events will optimize energy use and minimize mitochondria ROS production.

The Paeonia suffruticosa, called as 'Feng Dan', has been used for thousands of years in traditional Chinese medicine. In our chemical investigation on the root bark of the plant, five new phenolic dimers, namely paeobenzofuranone A‒E (1‒5), have been characterized. Their structures were determined by spectroscopic analysis including 1D and 2D NMR, HRESIMS, UV, and IR, as well as ECD calculations. Compounds 2, 4, and 5 showed cytotoxicity against three human cancer cell lines with IC50 values ranging from 6.7 to 25.1 μM. Compounds 1 and 2 showed certain inhibitory activity on NO production. To the best of our knowledge, the benzofuranone dimers and their cytotoxicity of P. suffruticosa are reported for the first time.

Freshwater pond aquaculture is the prevailing fish culture system worldwide, especially in developing countries. Climate change outcomes and inadequate environmental practices challenge its sustainability. This study applies emergy synthesis to assess the environmental performance of freshwater pond aquaculture in Brazil, aiming to identify and propose practices towards sustainability. As a study model, nine semi-intensive lambari farms operating at three levels of management were evaluated: low (LC), moderate (MC) and high (HC) control. Results showed that the main inputs for LC were services (27-46%), feed (7-39%), and water (15-21%), while for the MC and HC farms, they were feed (35-49% and 17-48%, respectively) and services (33-39% and 26-36%, respectively). All farms required more than 60% of their emergy from purchased inputs, resulting in low emergy sustainability index (ESI = 0.1-0.5). Replacing animal protein and oil on diet composition by vegetal sources, using superficial water instead of springwater, increasing juvenile productivity, and controlling pond fertilization can lead all systems to higher efficiency and resilience, increasing sustainability.

AMF (Arbuscular Mychorhizal Fungi) are very well known due to their importance in promoting growth and developments of plants especially vegetables. These fungi can be grown easily, stored and multiplied with simple means, also the application of these fungi is generally on the layer of the soil or near the roots in the inner layers of the soils. The growth of the amf fungi is very easy and they are highly adjustable to any soil and environmental conditions. In this review our main focus is on the use of amf for production of vegetables and also the effect of amf against insects and pests. The amf is known to reduce several symptoms caused by different insect pests and also plant diseases thereby promoting healthy growth of the plants. Also use of this amf will increase the uptake of nutrient from the soils through symbiotic relationships between plants and fungi. The uptake of important minerals which are drawn from deeper layers of soils is observed with the help pf amf. This study reveals the benefits of the use of amf under severe disease and pest incidences thereby known as an alternate for harmful chemical pesticides and fungicides.

Ruminant mammals extract nutrients from plant-based food through fermentation in the rumen; fiber and starch are pre-digested by microorganisms and methane is produced as a by-product, which released into the atmosphere acts as a potent greenhouse gas. In an effort to reduce enteric methanogenesis, dietary additives for ruminants have been investigated, and marine macroalgae have proven particularly promising, e.g., the inclusion of 0.2% dry matter of the red alga A. taxiformis into cow feed decreased in vivo methane production by up to 98%. Thus, if globally applied, the addition of algae in ruminant diets could revolutionize the management of greenhouse gas emissions across the livestock sector. However, the ozone-depleting nature of halogen compounds produced in Asparagopsis sp. and the reported adverse health impacts on humans, along with impracticability issues and the difficulty to produce, commercialize and distribute algae widely, has sown some doubt on the feasibility of using macroalgae as methane mitigation instruments. To circumvent such obstacles, and taking into account the paradigm that eukaryotic hosts cannot be understood without considering interactions with their associated microbiome, the exploration of marine algae associated microorganisms is anticipated. Following the notion that in the close and intimate relationships between algae-hosts and their microbiota the origin of chemical response mechanisms is often unclear, and that compounds initially assigned to algae have previously been shown to stem from host-associated microbes, it is not unreasonable to think that these may be involved in the antimethanogenic effects of marine algae in the rumen. Once identified, such microorganisms could lead to antimethanogenic feed additives, and reduce enteric methanogenesis from livestock ruminants substantially. This review is three-fold: it provides a brief, historic overview of macroalgae as feed supplements for ruminants, sums up the difficulties related to using whole-macroalgae as large-scale antimethanogenic feed additives, and describes the macroalga microbiome, including its potential to serve as an antimethanogen for enteric fermentation.

This article presents the integration of lean 6S methodologies and hazard analysis and critical control points (HACCP) in the food production sector. Through the study, it is seen that non-food industrial production is not very different from that of food and, in many cases, it assimilates protocols and ideas that are already working in the food industry; Such is the case of risk analysis, critical control points or hygiene, which are part of the food production protocol and, increasingly, of the industry in general. After the integrative analysis, the article proposes a common lean 6S - HACCP model, which can be used both in food production and in non-food industrial production.

This work analyzes the visibility and scientific impact of publications related to agricultural value chains. The incidence of bibliometric indicators allows for the interpretation of bibliographic information generated worldwide. Objective: The objective of this research is to analyze the published literature and bibliometric indicators on agricultural value chains. The Web of Science database was used to extract value chains data. The study analyzed articles published between 2010 and 2020. The keywords used are "agricultural value chains'' and articles from journals or studies related to the subject were selected for bibliometric analysis and methodological review. In the search for the keyword, a total of 4208 results were extracted, of which 1,669 records were considered for analysis. The bibliometric analysis of the data reveals that Wageningen University (55) has the highest number of publications, followed by Chinese Acad Sci (26). The author Klerkx L (9) has the highest number of records, followed by Hellin J (7). With respect to the countries with the greatest contributions on the subject are: the People's Republic of China, Germany, Italy, France and the United States. The study contributes to the analysis of bibliometrics and provides a methodological review of published journal articles on agricultural value chains. This bibliographic study presents the history of research development in agricultural value chains.

Green electrospun materials are gaining popularity in the quest for a more sustainable environment for human life. Bee pollen (BP) is a valuable apitherapeutic product, and has many beneficial features such as, antioxidant and antibacterial properties. Alginate is a natural and low-cost polymer. Both natural materials show good compatibility with human tissues for biomedical applications and have no toxic effect on the environment. In this study, bee pollen-loaded sodium alginate and polyvinyl alcohol (SA/PVA) nanofibrous mats were fabricated by the electrospinning technique. The green electrospun nanofibrous mats were analyzed by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FTIR), and differential scanning calorimeter (DSC). According to the findings of the study, the toxin-free electrospinning method is suitable for producing green nanomaterial. Because of the useful properties of the bee pollen and the favorable biocompatibility of the alginate fibers, the bee pollen-loaded SA/PVA electrospun mats have the potential for use in a variety of biomedical applications

The object of this work is to report some preliminary results on the mechanical harvesting of blueberry fruits of cv. Cargo® in the Piedmont region, one of the most productive areas of Italy that is specialized for fresh blueberry production. The automatization of harvesting operations could represent a competitive advantage for the investigated area’s blueberries supply chain, but could act as a limitation to maintaining the quality of fresh berries. A prototype machine and a commercial harvester (Easy Harvester®) were compared to manual picking, considering harvest efficiency (share of loss), labor productivity and harvesting cost. In the indicated context, the cost of labor exceeds 2.00 euros per kg of sellable product. The use of the prototype allowed a 37% re-duction of this cost, and the use of the Easy Harvester® allowed a reduction of about two thirds. It should be emphasized that these positive performances do not consider two other aspects: the re-duction in the marketable volume (attributable to losses in the harvest and post-harvest phase), and the reduction in the net sale price by 0.30 euros due to the sorting/selection costs in the ware-house. In this study, we highlight how the transition to mechanical harvesting requires the trans-formation of several farming and warehouse operations, such as new crop varieties, new field configurations, and new packaging processes. However, a possible technical improvement of the Easy Harvester® machine could represent an opportunity for Italian companies in the planning of the production and marketing of berries, involving all actors of the supply chain. Further research on the use of mechanization in the sector must still be continued and supported.

The present study was aimed to evaluate the suitability of agro-wastes and crude vegetable oils for the cost effective production of poly-β-hydroxybutyrate (PHB), to evaluate growth kinetics and PHB production in Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1 with these carbon substrates and to study the biodegradation of PHB accumulated by these cultures. Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1 accumulate higher amounts of PHB corn (79.90% of dry cell mass) and rice straw (66.22% of dry cell mass) medium respectively. The kinetic model suggests that the Pseudomonas sp. RZS1 follows the Monod model more closely than A. faecalis RZS4. Both the cultures degrade their own PHB extract under the influence of PHB depolymerase. Corn waste and rice straw appear as the best and cost-effective substrates for the sustainable production of PHB from Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1. The biopolymer accumulated by these organisms is biodegradable in nature. The agro-wastes and crude vegetable oils are good and low cost sources of nutrients for the growth and production of PHN and other metabolites. Their use would lower the production cost of PHN and the low cost production will reduce the sailing price of PHB based products. This would promote the large scale commercialization and popularization of PHB as ecofriendly bioplastic/biopolymer.

Italian floriculture is facing structural changes. Possible options to maintain competitiveness of the involved companies include promotion of added values, from local productions to environmental sustainability. To quantify value and benefits of cleaner production processes and choices, a holistic view is necessary, and could be provided by life cycle assessment (LCA) methodology. Previous studies on ornamental products generally focused on data from one company or a small sample. The aim of this study was a gate-to-gate life cycle assessment of two ornamental species (Cyclamen persicum Mill. and Pelargonium ×hortorum Bailey) using data from a sample of 20 companies belonging to a floriculture district in Treviso, Veneto region. We also assessed the potential benefits for the environmental impact of the selected species of alternative management choices regarding plant protection and reuse of composted waste biomass. Life cycle impact assessment showed the higher impact scores for the zonal geranium, mainly as a consequence of greenhouse heating with fossil fuels. This factor, along with higher uniformity of production practices and technological level of equipment, translated in lower variability observed in comparison with cyclamen production, which shows a wider results range, in particular for eutrophication, acidification and human toxicity potentials. The application of integrated pest management had significant benefits in terms of impact reduction for acidification and human toxicity of cyclamen, while reduced use of mineral nutrients through compost amendment of growing media resulted in a reduced eutrophication potential. The achievable benefits for zonal geranium were not observable because of the dominant contribution of energy inputs.

Italy is the leading European producer of rice. The transition to organic farming could represent a solution for environmental protection, as well as for the economic sustainability of farms, consumer safety and as a measure of climate mitigation, but it currently displays several weaknesses in the control and certification system. The objective of the current study is to propose advice for improving the control and certification scheme in the organic rice sector. To achieve this aim, we adopted a qualitative methodology based on participant observation at stakeholders’ meetings, focus groups, community-led workshops and deep interviews with relevant local actors. Findings show that there are some solutions to mitigate the weakness of the Italian certification scheme. The study also produces managerial implications to improve the Italian organic rice system.

Maximum entropy production principle (MEPP) has been formulated in the mid-twentieth century, and today it has acquired the status of an important principle of science, which is extremely effective in considering various non-equilibrium problems. In this study, for the first time, definition of life is based on an easily measurable physical quantity that is entropy production. Life and evolution are discussed from the point of view of MEPP and the Universe, but not a human

COVID-19 pandemic provoked a number of restrictive measures, such as the closure or severe restriction of border transit for international trading traffic, quarantines and self-isolation. This caused a series of interrelated consequences that not only prevent or slow down the spread of disease, but also impact the medical systems’ capability to treat the patients and help their recovery. In particular, steeply growing demand for medical safety goods cannot be satisfied by regular suppliers due to the shortage of raw materials originating from other countries or remotely located national sources, under conditions of quarantined manpower. The current context inevitably brings back memories (and records!) of the situation 80 years ago, when WWII necessitated major effort directed at the rapid build-up of low cost mass production to satisfy all aspects of war-time need. In the present short report we document a successful case of fast mass-production of light transparent medical safety face shields (thousands per day) realized in Skolkovo Institute of Science and Technology (Skoltech) fabrication laboratory (FabLab). The demand for safety face shields by tens of hospitals in Moscow City and Region rapidly ramped up due to the need to protect medical staff during patient collection and transportation to hospitals, and within both the infected (“red”) and uninfected (“green”) zones. Materials selection for sterilizable transparent materials was conducted based on the analysis of merit indices, namely, minimal weight at given stiffness and minimal cost at given stiffness. Due to the need for permanent wear, design was motivated by low weight and comfortable head fixation, along with high production efficiency. The selection of minimal tooling in University fabrication workshops and the use of distributed volunteer labor are discussed.

Hymenaea courbaril is an endangered species, promising to reforestation programs and mainly explored as a wood source. The available information concerning long-term storage methods, seed recalcitrance, parental, and substrate influence is scarce. This study focused on the seed behavior according to population origin and during one-year storage, also testing the efficiency of the low-temperature conservation. Variations between the uncertainty indexes were found to the studied populations after long-term storage. There was no significant loss of the germination potential in consequence of the prolonged storage period. Although, older seeds promoted gradually greater delayed germination. Germination speed, synchrony, and uncertainty indexes were substantially different between the -20° conservation and control. H. courbaril seeds are capable of long-term storage without losing their germination potential, indicating an orthodox behavior.

Temperature influences the life of many organisms in various ways. A great number of them live under conditions, where their ability to adapt to changes in temperature can be vital and largely determine their fitness. Understanding the mechanisms and principles underlying this ability to adapt can be of great advantage, for example, to improve growth conditions for crops and increase their yield. In times of imminent, increasing climate change, this becomes even more important, in order to find strategies and help crops cope with these fundamental changes. There is intense research in the field of acclimation, that comprises fluctuations of various environmental conditions, but most acclimation research focuses on regulatory effects and the observation of gene expression changes within the examined organism. As thermodynamic effects are a direct consequence of temperature changes, these should necessarily be considered in this field of research, but are often neglected. Also, compensated effects might be missed, even though they are equally important for the organism, since they do not cause observable changes, but rather counteract them. In this work, using a systems biology approach, we demonstrate that even simple network motifs can exhibit temperature dependent functional features, resulting from the interplay of network structure and the distribution of activation energies over the involved reactions. The demonstrated functional features are (i) the reversal of fluxes within a linear pathway, (ii) a thermo-selective branched pathway with different flux modes and (iii) the increased flux towards carbohydrates in a minimal calvin cycle that was designed to demonstrate temperature compensation within reaction networks. By this, we expand the scope of thermodynamic modelling of biochemical processes by addressing further possibilities and effects, following established mathematical descriptions of biophysical properties.

The aim of the study was to examine the biogas and methane yield of maize silage, a wastes in agricultural point of view and compare it to the biogas productivity of commonly used mixture of maize silage and mixed fodder with water. The experimental study was carried out into 2 parts. Firstly, the batch experiment was conducted in Mesophilic conditions (35°C), at five different hydraulic retention times (HRT): 6 DAT, 11 DAT 20 DAT 29 DAT and 41 DAT. The results revealed that maize silage was generated the highest biogas yield of 537 mL /241 mL at the HRT of 6days /41 days. Mixed fodder produced the highest biogas yield of 421 mL at the HRT of 6th days and the lowest one was 252 mL at the HRT of 20th days. Finally, the methane, carbon dioxide and hydrogen sulphide of biogas produced from maize silage and mixed fodder were analyzed using a gas chromatography. The results shown that biogas from maize silage precedes the gas less than the mixed fodder. In the field level experiment proved that from mixed fodder produced gas which would be enough for 7 member’s family used 3 months for the purpose of their cooking.

There is limited information on Tamarind production, trade and value added products in Kenya. Of late, there is growing interest in the domestic and export markets due to its multiple uses. The objective of this paper is to review existing literature to identify the missing value chain links which may help catalyse the scaling up of production and commercialization of Tamarind. Selected literature and interviews with traders and extension staff in the Coastal Counties were used to collect information for this study. Tamarind fruits are mainly collected in the wild in semi-arid areas of the country and marketed through informal channels. Mombasa is the terminal market for tamarind from Kenya and Uganda, from where domestic consumers and exporters obtain their supplies. Globally, virtually every part of tamarind tree (pulp, seed, leaves, flowers, bark and roots) has either nutritional, industrial or medicinal value. Tamarind fruit contains substantial levels of carbohydrates, proteins, vitamins, minerals and essential amino acids making it potentially useful in addressing wide spread malnutrition. Its anti-oxidant, anti-inflammatory, anti-microbial, anti-fungal and anti-diabetic properties gives tamarind wider application in conventional and traditional medicine. The findings suggest that scaling up the production and commercialization of tamarind in the country requires both public and private sector investment. The structure of this partnership should consist of the following value chain links: An efficient Seed / seedling system as a source of planting materials; production hubs by farmer associations, government institutions and private farms; aggregation centres for assurance of volumes and quality; processing, value addition and product diversification; an efficient distribution systems of wholesalers and retailers, particularly supermarkets; exporters and consumers. The agenda for further research should include breeding and availing early maturing cultivars demanded by the export market, quality management andvalue addition technologies.

Several optimization models of irreversible reverse cycle machines have been developed based on different optimization criteria in the literature, most of them using linear heat transfer laws at the source and sink. This raises the issue how close to actual operation conditions they are, since the heat transfer law on the phase-change processes is dependent on ΔT3. This paper addresses this issue by proposing a general model for study and optimization of thermal machines with two heat reservoirs applied to a Carnot-like refrigerator, with non-linear heat transfer laws and internal and external irreversibility. The optimization was performed using First and Second Law of Thermodynamics and Lagrange multipliers method. Thus, several constraints were imposed to the system, also different objective functions were considered, allowing finding the optimum operating conditions, as well as the limited variation ranges of the system parameters. Results show that the nature of the heat transfer laws affects the optimum values of system parameters for obtaining maximum performances and also their magnitude. Sensitivity studies with respect to system several parameters are presented. The results contribute to the understanding of the system limits in operation under different constraints and allow choosing the most convenient variables in given circumstances.

The German wine sector has encountered new challenges in water management recently. To manage water resources responsibly, it is necessary to understand the relationship between the input of water and the output of wine, in terms of quantity and quality. The objectives of this study are to examine water use at the farm scale at three German wineries, and to develop and apply, for the first time, a quality-based indicator. Water use is analyzed in terms of wine production and wine-making over three years. After the spatial and temporal boundaries of the wineries and the water flows are defined, the farm water productivity indicator is calculated to assess water use at the winery scale. Farm water productivity is calculated using the AgroHyd Farmmodel modeling software. Average productivity on a quantity basis is 3.91 L wine per m3 of water. Productivity on a quality basis is 329.24 °Oechsle per m3 of water. Water input from transpiration for wine production accounts for 99.4–99.7% of total water input in the wineries, and, because irrigation is not used, precipitation is the sole source of transpired water. Future studies should use both quality-based and mass-based indicators of productivity.

Digital agricultural technology extension service and sustainable food production have attracted attention from academia. However, the association between digital agricultural technology extension service and sustainable food production has not yet been fully investigated. This research investigates the average and heterogeneous impacts of digital agricultural technology extension service use on eco-efficiency among 1302 maize producing farmers from Northeast China major maize producing area in 2022 to fill this knowledge gap. The slack-based measure model with undesirable outputs is applied to calculate the eco-efficiency of maize production. To obtain an unbiased estimation of the average effect, the self-selection problem generated by observable and unobservable factors is solved by the endogenous switching regression model. Quantile regression is utilized to analyze the heterogeneous effect. Notably, the mediated effects model is utilized to examine the potential mechanism between them. Our findings indicate that digital agricultural technology extension service use can increase maize production's eco-efficiency. Digital agricultural technology extension service users would reduce eco-efficiency by 0.148 (21.11%) if they had not used the digital agricultural technology extension service. Digital agricultural technology extension service nonusers would improve eco-efficiency by 0.214 (35.20%) if they had used it. The robustness check reconfirms the results. Moreover, digital agricultural technology extension service use is more helpful to maize farmers who have lower eco-efficiency than those who have higher eco-efficiency. Digital agricultural technology extension service use can improve eco-efficiency of maize production through the application of organic fertilizers, green pesticides and biodegradable agricultural films.

The study delves into the Zaalklapspruit valley-bottom wetland in South Africa, a site designed through ecological engineering and currently impacted by acid mine drainage due to an upstream defunct coal mine. The research conducted in 2022, aimed to uncover the dynamics of contaminant dispersal within such a wetland setting, focusing on the origins, routes, and ultimate recipients of various metals and sulfur compounds. Analysis revealed that the bottom sediment is rich in organic material, with pH levels observed between 6.05 and 6.59, and exhibited notably low oxidation-reduction potentials, reaching down to −219.67 mV at sample point S3. Notably, Manganese displayed the highest adsorption rates, whereas Iron was predominantly absorbed by the roots of Typha capensis and the algae Klebsormidium acidophilum. The wetland's macrophyte rhizospheres hosted a rich array of microbiota, including families like Helicobacteraceae and Hydrogenophilaceae, which are crucial in metal and sulfur processing. This investigation sheds light on the intricate biogeochemical processes taking place involving the wetland's sediment, macrophyte root systems, periphyton, and microbial populations, underscoring the potential of ecologically engineered wetlands in the remediation of waters affected by acid mine drainage.

This bibliometric analysis delves into the realm of botanical gardens through the process of mapping literature and discerning research frontiers, underlying themes, and interconnections within the extant body of knowledge. The study uses a dataset of 1340 publications and employs methodologies such as authors' keywords co-occurrence data to examine the discipline's trends, patterns, and knowledge gaps. The study finds significant growth in literature from 1960 to 2023, emphasizing botanical gardens, conservation, taxonomy, biodiversity, ex-situ conservation, and diversity. Key influencers such as Sanja Kovačić, Elaissi, and Chemli have steered research directions towards ex-situ conservation and essential oils, reflecting the field's interdisciplinary nature. The study shows global institutional variation, with entities like the Chinese Academy of Sciences, the Royal Botanic Gardens UK, and the New York Botanical Garden US leading the discourse. Thematic analyses have identified core themes and emerging research topics, with ecological restoration, essential oils, invasive species, and climate change mirroring the field's expanding scope. The consistent prevalence of themes such as 'botanical gardens' and 'conservation' over time underscores their enduring significance. Emerging topics like climate change and biodiversity are gaining prominence, signaling a shift in research priorities. The expanding array of subjects, including 'invasive species' and 'genetic diversity,' indicates an amplified scope and growing complexity in botanical garden research. This study aims to bridge a crucial gap by outlining the developmental trajectory of botanical gardens and offering guidance for future research directions. Diverse research domains within botanical garden studies, including biodiversity, essential oils, taxonomy, and ex-situ conservation, present extensive avenues for exploration. Future research endeavors should delve into these impactful themes to better understand botanical ecosystems and their conservation. The study emphasizes the importance of nurturing interdisciplinary collaborations and multidisciplinary projects, advocating for a comprehensive and collaborative approach to future research in botanical garden studies.

As a precious natural resource, forests are being destroyed. In previous studies, there is a lack of interactive assessment of its distribution that comprehensively considers multiple external disturbances. This paper takes the Barcelona Metropolitan Region as an example. Based on remote sensing, it analyzes the development process of the forest from 2006 to 2018 through multiple landscape indicators, and OLS models were established to analyze variables that have direct and indirect effects on forest distribution. In addition, the ecological structure of the forest was analyzed based on NDVI. It was found that the forest area is the largest but has been decreasing, becoming more complex in distribution structure. Much of the forest was converted to agricultural land and grassland. The green quality of forests was increasing, and the broad-leaved forest, the second largest area, contributes the most. NDVI is the most important positively correlated variable, and daytime surface temperature is an important inverse factor related to NDVI. In addition, NDBI is also a negative condition that inhibits forest development. In conclusion: The BMR forest area is decreasing and becoming more fragmented. NDVI and daytime LST are the two most significant factors. Climate warming may lead to worse forest development.

Integrated energy systems (IES) seek to minimize power generating costs in future power grids through the dynamic coupling of different energy technologies. To accommodate fluctuations in load demand due to the penetration of renewable energy sources, flexible operation capabilities must be fully exploited, i.e., even power plants that are traditionally considered as base-load units need to be operated according to unconventional paradigms. Thermomechanical loads induced by frequent power adjustments can accelerate the wear and tear of components. If a unit is flexibly operated without respecting limits on materials and components, the risk of failures of expensive components will eventually increase, nullifying the additional profits ensured by flexible operation. In addition to the limits on power variations (explicit constraints), the solution of the unit dispatch problem needs to meet the limits on temperature, pressure and flow rate variations (implicit constraints). The FARM (Feasible Actuator Range Modifier) module was developed to enable existing optimization algorithms to identify solutions to the unit dispatch problem that are both economically favorable and technologically sustainable. Thanks to the iterative dispatcher-validator scheme, FARM permits addressing all the imposed constraints without excessively increasing the computational costs. In this work, the algorithms constituting the module are described, and the performance was assessed by solving the unit dispatch problem for an IES composed of three units, i.e., Balance of Plant, Gas Turbine, High-Temperature Steam Electrolysis. Finally, FARM module provides dedicated tools for visualizing the response of the process variables of interest during operation transients and a tool aiding the operator at making decisions. These techniques might represent the first step towards the deployment of an Ecological Interface Design (EID) for IES units.

Alternative fertilizations are essential to minimize the deteriorating effects of chemical fertilizers on soil and water quality/health. Accordingly, the present work investigated the effects of combined organic-inorganic fertilization (COIF) on wheat and rice yields, soil nutrients, and soil Cd accumulation. Hence, seven different treatments were set up: control (CK); conventional fertilization (CF); optimized fertilization (OF); organic fertilizer replacing 25% (T1) and 50% (T2) of OF; and organic nitrogen (N) replacing 25% (M1) and 50% (M2) of OF-N. Overall, significant increases occurred in the yields of COIF crops. Compared with the CF, the highest wheat and rice yields happened in M1 treatment (approximately by18.5%) (P &lt; 0.05). COIF slightly alleviated soil acidification, and improved the cation exchange capacity (CEC) of the study soils. Besides, COIF treatments significantly increased the contents of total phosphorus, total potassium, available phosphorus, and available potassium by 6.35 to 16.9 %, 3.17 to 10.9 %, 5.53 to 28.7 %, and 2.6 to 12 %, respectively (P &lt;0.05). Nevertheless, negligible increases took place in Cd content of COIF soils compared with the CK. Altogether, our results concluded on 25% replacement of OF-N by organic N (M1) to effectively improve the fertility/ecological sustainability of the study soils.

In the present work, a study has been carried out on the contamination of heavy metals in urban dust deposited on the roads of the city of Cartagena (Spain), in order to know the content of metals such as Ni, Zn, Pb, Cd, Cr and Cu. Likewise, the possible relationship of the concentration of heavy metals with the color of the sample, level of magnetism and traffic density was studied. Contamination was evaluated using several indices such as contamination factor (CF), enrichment factor (EF), geoacumulation index (Igeo), pollutant load index (PLI) and ecological risk index (RI). A total of 88 samples were taken in the urban area of Cartagena, and the metals were determined by acid digestion and measured by inductively coupled plasma mass spectrometry. The concentration of heavy metals in urban dust from Cartagena was Zn (672 mg/kg) &gt; Cu (248.9 mg/kg) &gt; Pb (227 mg/kg) &gt; Cr (82.7 mg/kg) &gt; Ni (47.7 mg/kg) &gt; Cd (4.1 mg/kg). Contamination levels were high in Pb, Zn, Cd and Cu, according to environmental indices. A correlation was found between magnetism and metal concentration, which was repeated for all metals except Cd. Dark-colored samples contained higher metal concentrations than light-colored samples. Meanwhile, streets with medium and low traffic intensity were found to have higher concentrations of heavy metals. This study's objective was to identify pollution hotspots caused by heavy metals in dust in the urban ecosystem of Cartagena city.

Climate change impacts threaten sustainable development efforts. The magnitude of the impacts, however, varies with socio-ecological characteristics of locations. This is the reason there is con-sensus on the necessity for climate change adaptive capacity building that is country driven, based on and responsive to local needs. However, information on context specific capacity building needs in developing countries is not readily available. The objective of this study was to establish location specific awareness, training, educational, research and technology capacity building needs for climate change adaptation among small-holder farmers in Uganda. Structured interviews were undertaken with 465 households from five agro-ecological zones selected based on the level of vulnerability of agricultural systems to the main climate variation and change hazards. Results reveal substantial capacity building needs in all the zones. Majority of the farmers needed capacity building for interventions on soil water conservation practices for adapting to drought and un-predictable rainfall. For all zones, education, research, and technology were perceived as key needs. However, the needs varied among zones. These results demonstrate the importance of context specificity in adaptation efforts. The study provides agro-ecological and social system specific in-formation for climate change adaptation planning and policy interventions for effective capacity building

It is essential to consider the factors that affect early childhood development because doing so can help identify potential risks and window of opportunity for intervention to improve outcomes for children. However, identifying risk and protective factors in early childhood requires careful consideration of several challenges and an integrated approach that recognises the complex and dynamic nature of development. The purpose of this study was to identify and describe the prevalent psychosocial risk and protective factors in the early childhood development phase, using an ecological perspective. The study employed a quantitative cross-sectional study using a random sampling technique. The final sample consisted of 505 caregivers of children aged 5 years old and younger. This study revealed that the most prevalent protective factors include child self-regulation, parent-child warmth, family management and collective efficacy but more importantly social support. While risk factors may exist this is mitigated by social support as it moderates and buffers against the effects of risk factors, as indicated by the various research studies cited.

The management and classification of solid waste is one of the most important challenges around the world, in order to sustain economic growth and preserve the environment. The objective is to propose the use of Smart Ecological Points as a strategy to address the problem related to the solid waste management system at the source, which has become one of the biggest problems globally and Colombia is no exception. The article describes the current state of the problem in the country and in turn, presents the possibility of developing a prototype corresponding to a low-cost Smart Ecological Point supported by the use of an experimental capacitive sensor and Machine Learning algorithms, which will reduce the time necessary for the classification of recyclable and non recyclable waste, minimizing the health risks and increasing the percentage of waste that can be reused, by reducing the probability of being contaminated at the source, an aspect that is very common when done manually. According to the results obtained, it was evident that the proposed prototype made an adequate classification of waste, generating the possibility of being manufactured with existing technology in the environment, in order to promote adequate waste classification at the source.

This work focused on Diplectanum aequans, a gill parasite of Dicentrarchus labrax. Analyzes allowed us to detect factors regulating parasites distribution on Corsican fish-farms, and to highlight the ecological structure of D. aequans communities on gills of fish. The study of parasite distribution showed that bigger fish appear more parasitized and that the infection dynamics of D. aequans can be explained by several factors such as biotic factors or farm environment conditions. The study of gill repartition of D. aequans showed that parasites tend to have a homogeneous distribution with no statistically significant difference in infection between two sides on each fish. However, the distribution of the number of parasites on gill arches varies according to the total number of parasites. Results differ depending on infection degree and host weight. When parasites are numerous, the individuals are distributed on the gill arches according to an antero-posterior gradient, while with low rates of infection, the parasites are randomly distributed on the 4 arches. The spatial distribution of D. aequans appears to be determined by the differential action of water flow through gill arch and the size of anterior arches. We also proposed a tool in order to reduce the sampling effort and allow optimal exploitation for fish farmers.

Dioscorea remotiflora, a perennial climbing herbaceous plant wild and native to México, bears tubers of important ethnobotanical and nutritional value. However, the information for its production and use is precarious. The objective of this research was to characterize the adaptation habitats of D. remotiflora in order to determine its ecological descriptors and current distribution, as well as to model its potential distribution. A comprehensive database encompassing 481 geo-referenced accessions was assembled. Using the Agroclimatic Information System for México and Central America (SIAMEXCA), 42 environmental variables were formulated. The MaxEnt model within the Kuenm R-package was employed to predict the species distribution. The findings reveal a greater presence of D. remotiflora in harsh environments, characterized by arid to semi-arid conditions, poor soils, and hot climates with long dry periods. The plant's nutritional and medicinal attributes, combined with its ecological adaptability, suggest its viability within evolving regional cropping systems under the influence of climate change. Niche modeling revealed that seven key variables determine the geographical distribution of D. remotiflora: precipitation of the warmest quarter, precipitation of the driest month, minimum temperature of the coldest month, November-April solar radiation, annual mean relative humidity, annual moisture availability index, and May-October mean temperature. Favorable regions for D. remotiflora coincide with its current presence sites, while other suitable areas, such as the Yucatan Peninsula, Northeast region, and Gulf of México, offer potential expansion opportunities for the species distribution. The characterization obtained for D. remotiflora, together with the description of its edaphic and climatic adaptation habitats, will enable an efficient design of strategies for its use and conservation in the near future.

Large terrestrial carnivores play a crucial role in top-down control within terrestrial ecosystems, maintaining ecosystem stability and biodiversity. However, intense interspecific competition often arises among sympatric large carnivores, leading to population reductions or even extinctions. Spatial partitioning through divergent habitat selection helps mitigate such competition. In Xinlong County, Sichuan Province, we used 293 infrared cameras for monitoring from September to May 2016 and March to October 2022. By employing the Generalized Linear Model (GLM) and the Maximum Entropy Model (MaxEnt), we developed an ensemble model predicting the suitable habitat distribution of leopards (Panthera pardus) and wolves (Canis lupus). We analyzed the main environmental factors influencing habitat selection and the fragmentation of suitable habitats. We found that suitable habitat distribution differed significantly between them. Both species preferred areas with gentle slopes close to settlements. While leopards' habitat selection primarily depended on the distance from settlements, the slope was predominant for wolves. Suitable habitats displayed aggregation, yet wolves exhibited higher fragmentation and more complex patch shapes, indicating greater susceptibility to human activities. These results suggest that sympatric large carnivores, such as leopards and wolves, can reduce spatial competition intensity and promote spatial partitioning by selecting divergent suitable habitats, thereby facilitating species coexistence.

The durability of ecological concrete in a marine environment was studied. Specimens of a six-year-old submerged ecological concrete from a breakwater located in the East Mediterranean sea were analyzed for their biological carbonate deposition cover, chloride effective diffusion, carbonation, and mineralogy. About 57% of the surface was found to be covered by biogenic-deposited carbonates. The effective chloride diffusion coefficient and the carbonation rate were found to be reduced proportionally to the biogenic-carbonate cover. Most of the aluminates were found in non-crystalline minerals. No evidence of a sulfate attack was found.

This article investigates the dynamics of socio-ecological systems (SESs) unsustainability. By adopting a theoretical standpoint grounded in systems’ theory, the analysis shows how SESs’ teleology (or final cause) is of the utmost relevance for understanding unsustainability and how it is pivotal for envisioning possible evolutionary trajectories towards sustainability. Building on the contributions of both system and social scientists, the study argues that SES’s teleology is determined by dominant social ontologies that require a dialectical lens to be properly dealt with. The article therefore proposes the adoption of the adaptive cycle heuristic complemented by an historical-geographical approach based on world-ecology theory as a means to dynamically model of SESs’ behaviour. Such a perspective allows for the direct comparison between the four stages of the panarchy cycle (reorganization, exploitation, conservation, and release) and the four stages theorized by the world-ecology dialectics (expansion, appropriation, capitalization, crisis). In conclusion, the article claims that both system and social scientists would benefit from including in their analysis concepts and definitions from the other field, since both provide valuable insights about SESs' processes of change and both are necessary to envision transition pathways towards sustainability.

The ageing transformation of digital health services faces issues of how to distinguish influencing factors, redesign services, and effectively promote measures and policies. In this study, in-depth interviews are conducted and grounded theory applied to open coding, main axis coding, and selective coding to form concepts and categories. Trajectory equifinality modeling clarified the evolution logic of digital transformation. Based on the theory of service ecology, a digital health service ageing model is constructed from the "macro-medium-micro" stages and includes governance, service, and technology transformation paths. The macro stage relies on organizational elements to promote the institutionalization of management and guide the transformation of governance for value realization, including the construction of three categories: mechanism, indemnification, and decision-making. The meso stage relies on service elements to promote service design and realize service transformation suitable for aging design, including the construction of three categories: organization, resources, and processes. The micro stage relies on technical elements to practice experiencing humanization, including the construction of three categories: target, methods, and evaluation. These results deepen the understanding of the main behaviors and roles of macro-organizational, meso-service, and micro-technical elements in digital transformation practice and have positive significance for health administrative agencies to implement action strategies.

Urban Tree Canopy (UTC) greatly enhances the livability of cities by reducing urban heat buildup, mitigating stormwater runoff, and filtering airborne particulates, among other ecological services. These benefits, combined with the relative ease of measuring tree cover from aerial imagery, have led many cities to adopt management strategies based on UTC goals. In this study, we conducted canopy analyses for the 300 largest cities in Florida to assess the impacts of development practices, urban forest ordinances, and hurricanes on tree cover. Within the cities sampled, UTC canopy ranged from 5.9% to 68.7% with a median canopy coverage of 32.3% Our results indicate that the peak gust speeds recorded during past hurricanes events were a significant predictor of canopy coverage (P-value = <0.001) across the sampled cities. As peak gust speeds increased from 152 km/h (i.e., a lower-intensity Category 1 storm) to 225 km/h (lower-intensity Category 4 and the maximum gusts captured in our data), predicted canopy in developed urban areas decreased by 7.7%. Beyond the impacts of hurricanes and tropical storms, we found that historic landcover and two out of eight urban forest ordinances were significant predictors of existing canopy coverage (P-landcover <0.001; P-tree preservation ordinance = 0.02, P-heritage tree ordinance = 0.03). Results indicate that local policies and tree protections can protect or enhance urban tree canopy, even in the face of rapid development and periodic natural disturbances.

Recent work on heavy metal pollution in Manila Bay suggests elevated concentration in the surface sediments. It is critical to identify the sources of these heavy metals to effectively rehabilitate the bay. Our study investigated the sources of the heavy metal pollution that ended up in Manila Bay and the risks associated with these toxic metals based on a recent survey conducted. Surface sediment samples with higher heavy metal concentrations were found in the upper to middle parts of the bay while lower concentrations were in the southeast areas. Multivariate analyses such as hierarchical cluster analysis (HCA), principal component analysis (PCA), and Pearson correlation analysis were used to identify the sources of the heavy metals. The heavy metal pollution in Manila Bay is attributed to several rivers draining northeast of Manila Bay, particularly the Marilao-Meycauayan-Obando River System (MMORS) which is cited as one of the 30 dirtiest river systems in the world. The ecological risks associated with heavy metals in the sediments found higher incidences of toxicity in north and middle parts of Manila Bay. Cu and Cr posed the highest risks of toxicities than any other heavy metals. Based on our analysis, the counterclockwise water gyre of the bay can explain the distribution and ecological risks associated with the heavy metals as supported by the findings of the PCA. Given the high priority by the Philippine government to rehabilitate the bay, our study strongly shows that efforts to restore the ecological status of Manila Bay will only succeed if the pollution from major rivers draining to it will be properly addressed.

Problem gambling among young people is an emerging trend globally. The online environment in particular offers various possibilities for gambling engagement. This is the first cross-national survey study using the social ecological model to analyze problem gambling, especially in the online context. The aim was to analyze how different social ecological spheres explain problem gambling. Participants were young people aged 15–25 in the United States (n = 1,212), South Korea (n = 1,192), Spain (n = 1,212), and Finland (n = 1,200). The South Oaks Gambling Screen (SOGS) instrument was used as a measure for problem gambling. Regression models predicted problem gambling with measures of intrapersonal, interpersonal, organizational, and societal spheres. Spanish participants had the highest SOGS score for problem gambling. Out of the spheres, organizational-sphere measures best explained the variation in problem gambling in all countries (26%) when compared to the societal (3%), interpersonal (5%) and intrapersonal (11%) spheres. In the full model, organizational-sphere measures had strong associations with problem gambling. These included consumer debt, online gambling community participation, online casino participation, and exposure to online pop-up advertisements. Other robust predictors of problem gambling included conformity to group norms in the interpersonal sphere and male gender and impulsivity in the intrapersonal sphere. Cross-national results were similar in different countries. The online context plays a major role in problem gambling behavior. The social ecological model is a useful tool by which to tackle problem gambling and develop preventative measures.

The paper addresses an analysis of the efficiency and profitability of the operation of a photovoltaic installation located in the geometric centre of Europe (near Białystok, Poland), where the intensity of solar irradiation is not too high compared to other European countries. It is calculated that in that place average solar irradiation being lower even by approx. 26 kWh than that for the whole Europe, which results in a 26% drop in the economic potential of the utilisation of solar energy for its conversion. A case study and an economic analysis show that without minimum funding amounting to 50% of the investment costs paid for the modernisation of a central heating system assisted by PV cells, the time of return of pecuniary expenditures exceeds 7 years. Apart from the Simple Pay-Back Time SPBT, discount indicators determined in the paper also include the net present value NPV and the internal rate of return IRR. Moreover, a direct ecological effect has been determined for such an investment.

This paper reports on the changing dynamics of a small town’s social-ecological system (SES) concerning oil and gas industry boom-bust economic cycles and both the vulnerability and resilience of the town over the past 30 years. With the goal to understand how resource-based single industry impact social-ecological systems, we developed indicators of human and environmental well-being and assessed them. Seven indicators include labor force distribution, education, oil price, household income, water quality, air quality, and land cover land use. Over this period, Drayton Valley, Canada quadrupled in size, with more than 20% of the population working in the oil and gas sector. Median income rose to 42% above the national average despite the population lagging national benchmarks for educational attainment. There have also been dramatic fluctuations in levels of fluoride, phosphorus, and other chemicals in water quality samples, implying a correlation with fossil fuel extractive activities over this period. Land cover land use change analysis shows a decreased area of water bodies, wetland, and forests, and increased built capital and agricultural land. While economic boom cycles have led to cash inflows, an exclusive focus on the benefits of the oil and gas industry may leave those dependent on the industry vulnerable to social and environmental risk factors during bust cycles that are beyond their control in the everchanging global oil economy. This phenomenon which has been referred to as the “resource curse” suggests the need to anticipate cyclical (or more sustained) periods of low levels of oil and gas production. These results suggest that single boom-bust economies impact every aspect of social-ecological systems. Therefore, a sustainable development plan that comprehensively considers not only economic growth, but also diversification, environment protection, and strategic land use planning is indispensable to ensure the long-term development of communities that depend upon extractive industries.

Geoscientists developed geoethics, an intra-disciplinary field of applied philosophical studies, during the last decade. Reaching beyond the sphere of professional geosciences, it led to professional, cultural, and philosophical approaches to handle the social-ecological structures of our planet ‘wherever human activities interact with the Earth system’. Against the backdrop of the COVID-19 and considering geoscientists’ experiences dealing with disasters (related to hazards like tsunamis, floods, climate changes.), this essay (1) explores the geoethical approach, (2) re-casts geoethics within western philosophical systems, such as the Kantian imperatives, Kohlberg scale of moral adequacy, Jonas’ imperative of responsibility, and (3) advances a ‘geoethical thesis’. The latter takes the form of a hypothesis of a much broader scope of geoethics than initially envisioned. That hypothesis appears by suspecting a relationship between the relative successes in the COVID-19 battle with the positioning of agents (individual, collective, institutional) into ethical frameworks. The turmoil caused by the COVID-19 pandemic, calls for the transfer of experiences between different disciplinary domains to further sustainable governance, hence generalising the geoethical approach. It is emphasized that only when behaving as responsible and knowledgeable citizens, then people of any trade (including [geo-]scientists) can transgress the boundaries of ordinary governance practices with legitimacy.

Unplanned urbanisation and industrialisation have severely degraded natural ecosystems, particularly wetlands. The Ganges-Brahmaputra Basin support 630 million inhabitants; yet continue to be altered rapidly, jeopardizing the region’s social and ecological integrity. By conducting qualitative interviews and participant observation in a wetland dependent village located in the Lower Gangetic Floodplains we investigated how degrading wetlands in sub-urban landscapes were affecting socio-ecological systems. Not only did the wetlands provide livelihood options, mainly fishing and farming, but also provided prestige and autonomy. Vulnerable sections of the society across class, age and gender were solely dependent on the wetland. In absence of political will to safeguard wetland health, industries emerged by altering wetlands, which hampered local community’s livelihood and lifestyle. Further, our study demonstrated that local ecological knowledge could provide qualitative baseline information for fast-tracking identification of important wetlands and creating inventories to initiate wetland conservation and management. Finally, we recommend local governance structures should be strongly tied to international or national wetland policies so that wetland functions along with human health and well-being could be sustained. We strongly advocate that contradictions in policies be resolved to strengthen efforts to conserve wetlands which provide resilience to marginal communities in the face of calamities.

Global environmental and societal changes threaten the cultures of Indigenous Peoples and Local Communities (IPLC). Despite the importance of IPLC worldviews and knowledge systems to human well-being and biodiversity, risks to these cultural resources are commonly simplified or neglected in environmental impact assessments, in part because cultural impacts are often indirect and therefore difficult to demonstrate. Here, we show that dependency of a culture on the environment can be mapped through human connections with biophysical elements in their environment. We illustrate a rich variety of cultural values that connect an indigenous Māori tribe in New Zealand with their local environment, then evaluate the resilience of this socio-environmental value system to environmental changes. Our results detail how loss of access to key environmental elements can have extensive direct and cascading impacts on multiple facets of indigenous cultural heritage. Consequently, considering only direct effects of environmental change on cultural heritage, or treating the richness of IPLC environmental relations simplistically, can severely underestimate the seriousness of environmental impacts on IPLC culture. Thus, protecting Earth’s cultural and biological diversity requires inclusion of human-environment relationships in environmental impact assessments.

Ghana has had a long-standing problem of illegal gold mining that has led to the destruction of the environment. The government of Ghana is taking steps to not only curb illegal mining but also to restore destroyed lands that resulted from illegal mining. The government intends to spend financially in the area of ecological restoration to returned disturbed lands to their natural states possible, but the question remains whether restoring those disturbed lands will be beneficial to the country. The study was undertaken in Bekwai Municipal Area in the Ashanti region of Ghana where most locals are farmers. The research studies whether the benefits of ecological restoration outweigh the cost of ecological restoration? The research deployed a quantitative data collection. The data collected was analyzed using benefit-Cost ratio. The result shows that the benefit of ecological restoration outweighs the cost incurred as dependent on the land use as a carbon sequestration project. In conclusion, investment in ecological restoration is a step in the right direction for a country endowed with gold resources. This will spur growth and at the same time improve and protect the country’s natural resources and environment.

Research subjects of this study are four representative locations in the industrial complex, in the city of Banja Luka, Republic of Srpska, Bosnia and Herzegovina. 16 polycyclic aromatic hydrocarbons (PAHs) (∑16PAHs), humus and pH were determined. The main objective of the paper is to determine the concentration levels, to assess the probable sources of PAHs contamination in soil and groundwater and to determine the ecological risk. The ∑16PAHs in soil (at depths of 30 cm, 100 cm, 200 cm, 300 cm and 400 cm) ranged from 0.99 to 2.24 mg/kg, from 0.34 to 0.46, from 0.24 to 0.32, from 0.13 to 0.27 and from 0.13 to 0.47, with mean values of 1.70 mg/kg, 0.40 mg/kg, 0.28 mg/kg, 0.20 mg/kg and 0.26 mg/kg, respectively. The ∑16PAHs in groundwater ranged from 0.23 to 4.50 mg/m³, with a mean value of 1.42 mg/m³. Surface soil and groundwater are heavily contaminated. All values of ∑PAHs in soil layers were lower in the depths of the soil. Factor analysis indicates three sources of contamination, i.e. principal component (PC) PC1 (pyrogenic), PC2 (petrogenic) and PC3 (biomass), with 52.39%, 26.14% and 8.46% of the total variance, respectively. ∑PAH and PAHs indicate high ecological risk for most PAHs, which decreases with soil depth.

This study analyzes the natural and social factors influencing the emergence and publicization of the invasive status of a fast growing bush, gorse (Ulex europaeus), by comparison between countries on a global scale. We used documents collected on the web in a standardized way. The results show that in all the countries studied, there are several public statuses attributed to gorse. The invasive status is the one that is most shared. The other most frequently encountered status are those of noxious weed, and of economically useful. The invasive status is publicized in nearly all countries, including those where gorse is almost absent. We quantified the publicization of the invasive gorse status of gorse by an indicator with 5 levels, and then performed a multivariate analysis that combines natural and social explanatory variables. The results lead us to propose the concept of invasive niche: the set of natural and social parameters that allow a species to be considered invasive in a given socio-ecosystem.

Conservation of natural habitats in human-dominated landscapes is critical for halting biodiversity loss. Maintaining habitat quantity and connectivity requires landscape-level collective action, which results from environmental decisions made by individual land owners. We investigate how individual decision making in a rural collective translates into quantitative differences in landscape-level environmental outcomes. Behavioral science has become a critical domain of knowledge in conservation, but little attention has been paid to how multiple behavioral drivers determine the success of collective environmental action. We developed a social-ecological model for landscape-level conservation using a detailed data set of 600 land owners in New Zealand. With the model, we tested whether the effect of social influence networks on collective conservation action was altered by their interplay with land owners’ personal characteristics, connections to cross-scale actors and local environmental contexts. Interactions between multiple behavioral drivers determined the environmental outcomes of collective action in unexpected ways by modifying, muting or amplifying the effects of single drivers. Importantly, we detected a social-ecological mechanism for rapid change in the extent of protected habitats, which can explain highly successful or failed environmental outcomes of collective conservation. Further, when environmentally desirable and undesirable behaviors spread simultaneously through the social network, homophily and network cohesion hinder desirable environmental outcomes. This effect can be modified by other drivers such as social responses to local environmental change. Thus, understanding how the antagonistic and synergistic effects of behavioral drivers can be best utilized in conservation will benefit biodiversity and ensure benefits that humans obtain from biodiversity.

Urbanization and industrialization processes in Mongolia have been significant and rapid for the last half-century. During this period, changes in political and economic systems, growth in the population, and the occasional harsh climate conditions were subject to fluctuations in the natural resource usage. The total Ecological Footprint (EF) in Mongolia has increased from 6.8 million global hectares (gha) in 1961 to 14.6 million gha in 2012. However, Biocapacity (BC) has decreased from 50.6 million gha in 1961 to 39.0 million gha in 2012. The study shows that grazing land Footprint and carbon uptake land Footprint are the two major contributors of the recent intensified use of biological resources. To ensure stable economic development and sustainable use of natural resources, environmental planning is required to consider both the population’s pressure on the environment and the ecosystem’s regeneration capacity, simultaneously. We have proposed a few possible strategies for sustainable utilization of grazing land Footprint and carbon Footprint. For grazing land Footprint, efficient management of both herding practice and number of animals should be considered. In case of carbon Footprint, it is estimated that with the improved combustion efficiencies of coal-based power plants and the maximum use of renewable energy, carbon dioxide (CO₂) emissions in Mongolia can be reduced up to 30% compared to the base line business as usual case in 2030.

Conservation scientists recognize that additional protected areas are needed to maintain biological diversity and ecological processes. As regional conservation planners embark on recommending additional areas for protection in formal conservation reserves, it is important to evaluate candidate lands for their role in building a resilient protected areas system of the future. Here, we evaluate North Carolina’s Mountain Treasures with respect to their (i) ecological integrity, (ii) role in connecting existing core protected areas, (iii) potential to diversify the ecosystem representation of reserves, and (iv) role in maintaining hotspots of biologically-rich areas not well protected. Mountain Treasures represent a citizen inventory of roadless areas and serve as candidates for elevated levels of conservation protection on U.S. federal lands. We compared Mountain Treasures to other candidate lands throughout the country to evaluate their potential national significance. While the Mountain Treasures tended to be more impacted by human modifications than other roadless areas, they are as important as other roadless areas with respect to their role in connecting existing protected areas and diversifying representation of ecosystems in conservation reserves. However, Mountain Treasures tended to have a much higher biodiversity priority index than other roadless areas leading to an overall higher composite score compared to other roadless areas. Our analysis serves as an example of how using broad-scale datasets can help conservation planners assess the national significance of local areas.

Violence against women or gender-based violence (GBV) is a major public health issue facing women and girls in different settings and is reported to have worsened globally during the COVID-19 pandemic. Despite the impact of the COVID-19 pandemic on increased violence against women in general, which has been reported in many settings globally, there is a paucity of evidence of its impact on violence against highly vulnerable women living with HIV or tuberculosis (TB). Using a qualitative design, this study aimed to explore the views and experiences of women living with HIV (n=19) or TB (n=23) in Timor Leste regarding the GBV they faced during the COVID-19 pandemic. They were recruited using the snowballing sampling technique. Data were collected using one-on-one in-depth interviews and focus group discussions. The five steps of qualitative data analysis suggested in Ritchie and Spencer’s analysis framework were employed to guide the analysis of the findings. Findings indicated that women in this study experienced intensified physical, verbal, sexual and psychological violence by their partners, spouses, in-laws, and parents or other family members during the COVID-19 pandemic. Several prominent risk factors that worsened violence against women during the pandemic were (i) HIV or TB-positive status, (ii) traditional gender roles or responsibilities and expectations, (iii) economic and financial difficulties reflected in the loss of jobs and incomes due to the pandemic, and (iv) individual factors such as jealousy and increased alcohol drinking developed during the lockdowns. The findings underscore the urgent need for multifaceted interventions to address GBV, which should encompass challenging traditional gender norms, addressing economic inequalities, and targeting individual-level risk factors. The findings also indicate the need for the development of robust monitoring and evaluation systems to assess the effectiveness of policies and interventions addressing GBV where the results can inform future improvement. The findings also indicate the need to include GBV in the protocol or guidelines for HIV and TB management. Future large-scale quantitative studies to capture the magnitude and specific drivers of GBV against women living with HIV and TB during the pandemic are recommended.

Introduction. Self-sampling has the potential to increase cervical cancer screening (CCS) among women living with HIV (WLWH) in low and middle-income countries (LMICs). However, our understanding of how HPV self-collection studies have been conducted in WLWH is limited. The purpose of this scoping review was to examine the extent to which the HPV self-sampling has been applied among WLWH in LMICs. Method: We conducted multiple searches in several databases for articles published between 2000 and January 2022. With the combination of keywords relating to HPV self-sampling, LMICs, and WLWH, we retrieved over 9,000 articles. We used pre-defined inclusion and exclusion criteria to select relevant studies for this review. Once a study met the inclusion criteria, we created a table to extract each study’s characteristics and classified them under common themes. We used a qualitative descriptive approach to summarize the scoping results. Results: A total of 12 articles were included in the final review. Overall, 3,178 women were enrolled in those studies and 2,105 (66%) of them were WLWH. The self-sampling participation rate was 92.6%. The findings of our study show that 43% of the WLWH in 8 of the studies reviewed tested positive for high-risk HPV (hr-HPV) genotypes, indicating 4 out of 10 WLWH in the studies are at risk of cervical cancer. The prevalence of the hr-HPV in WLWH was 18% higher than that of HIV-negative women. Most women in the study found the self-sampling experience acceptable, easy to use, convenient, and comfortable. Self-sampling performance in detecting hr HPV genotypes is comparable to clinician-performed sampling. However, limited access (i.e., affordability, availability, transportation), limited knowledge about self-screening, doubts about the credibility of self-sampling results, and stigma remain barriers to wide acceptance and implementation of self-sampling. In conclusion, the findings of this review highlight that (a) cervical cancer is a threat to every sexually active woman but for WLWH the threat increases, (b) self-sampling laboratory performance is similar to clinician performed sampling, (c) self-sampling is associated with an increase in cervical cancer screening uptake and (d) WLWH reported a positive experience with self-sampling. However, personal, environmental, and structural barriers challenge the application of self-sampling in LMICs, and these need to be addressed. Keywords: keyword 1; keyword 2; keyword 3 (List three to ten pertinent keywords specific to the article yet reasonably common within the subject discipline.)

Background: Absolute uterine factor infertility (AUFI) is a kind of infertility that is completely attributable to uterine absence (surgical or congenital for women with Mayer-Rokitansky-Küster-Hauser syndrome: MRKH) or anatomic or functional abnormality that prevents embryo implantation or completion of pregnancy to term. Until recently, the only viable option to parenthood for couples with AUFI were adoption or surrogacy. Since a first attempt of uterus transplant (UTx) in 2000, nine babies were born from women with a transplanted uterus from 2014, eight of which in Sweden, and one in the United States. These promising results are raising immense hopes for the women with AUFI and there is optimism about the possibility for UTx to become part of clinical care even though, besides encouraging results, the procedure has also resulted in increased risks and harms for both the donors and recipients and increased risks of premature birth for the fetus. At present UTx is still considered as experimental and requiring more research and safety assessment before becoming a therapeutic option for AUFI. The transition from experimental procedure to therapeutic care would result in less strict ethical scrutiny for UTx and in the possibility for patients to get reimbursement for the procedure by the relevant healthcare insurance or public healthcare providers. In turn, an increase in the number of UTx performed yearly by specialized surgical teams would result in a general improvement of the “field strength”. However, at present it is difficult to establish the amount of evidence that we need in order to consider UTx as no longer experimental but routine clinical practice. The literature on UTx provides recommendations on the different outcomes that should be monitored in this experimental phase but no study is anticipating the number of subjects that should be followed and for how long. Conclusion: As for other transplants that have become routine practice, like renal transplant and heart transplant, it is likely that the decision on “routine practice readiness” will result from available cumulated evidences, from expert capacity to find a consensus on best practices and on political considerations as well, including pressures form patients and patient groups.

Aims and Background: People living with mental disorders experience a disproportionately higher burden of tobacco-related disease than the general population. Long-term substitution with less harmful nicotine products could reduce the tobacco-related harm among this population. This study investigated the views and preferences of people with mental health disorders about different nicotine products and their use as long-term substitutes for cigarettes. Methods: Semi-structured focus group discussion followed by a brief questionnaire. The discussion transcripts were analysed for content and themes and quantitative data summarised with descriptive statistics. Results: Twenty-nine participants took part in four focus groups. Vaping devices were the most acceptable nicotine products discussed, however preferences for nicotine products were idiosyncratic and varied along aesthetic, pragmatic, sensory and symbolic dimensions. The concept of tobacco harm reduction was unfamiliar to participants, however they generally agreed with the logic of replacing cigarettes with less harmful nicotine products. Barriers to activating tobacco harm reduction included the symbolism of smoking and quitting; the importance placed on health; the consumer appeal of alternatives; and cost implications. Discussion and Conclusion: Engaging this population in tobacco harm reduction options will require communication that challenges black and white thinking (a conceptual framework in which smoking cigarettes or quitting all nicotine are the only legitimate options) as in practice this serves to support the continuance of smoking. Consumers should be encouraged to trial a range of nicotine products to find the most acceptable alternative to smoking that reduces health harms. Providing incentives to switch to nicotine products could help overcome barriers to using less harmful nicotine products among mental health consumers.

Based on the demographic shift and the related challenges resulting from the growing number of elderly and persons with chronic diseases, the idea of smart home that supports its inhabitants in the daily life, gains importance. The purpose of this paper was to examine in a prototypic Ambient Assisted Living environment if users after interaction with different health-supporting applications intend to use such in the future. Two experimental studies exemplary show possible applications of home-integrated technology that can support, assist and accompany the target group in different contexts, and examine to what extent participants are willing to future use such sophisticated technology at home. The results show that people in general, but especially the old and chronically ill ones are quite fascinated of health-supporting ambient technology and the majority intends to use such ambient assistance in the future (study I). Moreover, serious games for healthcare are shown as a hedonic use of technology in smart homes that have a great potential to retain or improve the physical health, mobility and the overall well-being of the inhabitants (study II). The article provides two examples of ambient technology to leverage the demographic change and presents important user factors for facilitating high user acceptance.

The classical joint economic lot-sizing (JELS) policy in a single-vendor single-buyer system generates an equal production quantity in all cycles, where the input parameters remain static indefinitely. In this paper, a new two-echelon supply chain inventory model is developed involving a hybrid production system that simultaneously focuses on green and regular production methods with optimal allocation fraction of green and regular productions. Unlike the classical mathematical formulation, each cycle is independent from the previous one, and consequently, the input parameters can be adjusted to be responsive to the dynamic nature of demand rate and price fluctuation. A rigorous heuristic approach is used to derive a global optimal solution for a joint hybrid production system. The model accounts for carbon emissions from production and storage activities related to green and regular produced items along with transportation activity under a multi-level emission-taxing scheme. The results emphasize the significant impact of green production on emissions. That is, the higher the allocation fraction of green production the lower the total amount of emissions generated by the system, i.e., the system becoming more sustainable. Adopting a hybrid production method not only decreases the greenhouse gas (GHG) emissions dramatically, but also reduces the per unit time total cost when compared with regular production. One of the main findings is that the total system cost generated by the base closed-form formula of the proposed model is considerably lower than that of the existing literature i.e., 33.59% (16.13%) lower in the first cycle (subsequent cycles) when the regular production method is assumed. Moreover, the optimal production rate generated by the proposed model is the one that minimizes the emissions production function. Illustrative examples and special cases that reflect different realistic situations are compared to outline managerial insights.

Smart Living, an increasingly prominent concept, entails incorporating sophisticated technologies in homes and urban environments to elevate the quality of life for citizens. A critical success factor for Smart Living services and applications, from energy management to healthcare and transportation, is the efficacy of human action recognition (HAR). HAR, rooted in computer vision, seeks to identify human actions and activities using visual data and various sensor modalities. This paper extensively reviews the literature on HAR in Smart Living services and applications, amalgamating key contributions and challenges while providing insights into future research directions. The review delves into the essential aspects of Smart Living, the state of the art in HAR, and the potential societal implications of this technology. Moreover, the paper meticulously examines the primary application sectors in Smart Living that stand to gain from HAR, such as smart homes, smart healthcare, and smart cities. By underscoring the significance of the four dimensions of Context Awareness, Data Availability, Personalization, and Privacy in HAR, this paper serves as a valuable resource for researchers and practitioners striving to advance Smart Living services and applications.

Smart living, a concept that has gained increasing attention in recent years, revolves around integrating advanced technologies in homes and cities to enhance the quality of life for citizens. Sensing and human action recognition are crucial aspects of this concept. Smart living applications span various domains, such as energy consumption, healthcare, transportation, and education, which greatly benefit from effective human action recognition. This field, originating from computer vision, seeks to recognize human actions and activities using not only visual data but also many other sensor modalities. This paper comprehensively reviews the literature on human action recognition in smart living environments, synthesizing the main contributions, challenges, and future research directions. This review selects five key domains: Sensing Technology, Multimodality, Real-time Processing, Interoperability, and Resource-Constrained Processing, as they encompass the critical aspects required for successfully deploying human action recognition in smart living. These domains highlight the essential role that sensing and human action recognition play in successfully developing and implementing smart living solutions. This paper serves as a valuable resource for researchers and practitioners seeking to explore further and advance the field of human action recognition in smart living.

The impact of COVID-19’s unexpected outbreak forced the scientific world to thoroughly seek alternative ways of treatment in order to overcome the hindrance of traditional medicine in alleviating the symptoms of this virus and possibly be an option for a potential cure in the near future. The antibiotic erythromycin, which was introduced in 1952, has been reported to pose an effective substitute medication for various ailments such as skin, respiratory, bone, female reproductive conditions, and cancer, as well as the newly added COVID-19’s aftermath. Countries, World Health Organization and the health industry have recruited and cooperated with numerous universities and institutions, so as to tackle the demand for efficient antibiotics, with USA and China leading this effort. Consequently, the catalytic mechanism of erythromycin’s synthesis and industrial production was discussed and analyzed further in order to gain a better understanding and extrapolate innovative and environmentally friendly methods of producing this antibiotic. Therefore, the demand for an increase and improvement in the production of erythromycin should be globally promoted, in order to deliver more effective results against infectious diseases such as COVID – 19.

Larus michahellis increased its population throughout the 20th century in its worldwide distribution area. The increase in the Salinas de San Pedro del Pinatar has produced changes in the habitats due to the contribution of guano, predation on birds, incidents with workers, and the production of salt. The objective is to analyze the impacts of L. michahellis on the landscape, habitats, waterfowl, salt production, and workers, as well as to evaluate the effectiveness of control activities. Censuses of wintering L. michahellis have been carried out between 1990-2021, of nesting aquatic birds between 1994-2021, and nests and eggs of L. michahellis have been eliminated between 2000-2021. The result has been a decrease in pairs of L. michahellis, recovery of waterfowl populations, colonization of others, absence of incidents with workers, and reduction of damage to salt production. However, to reach a definitive solution, measures should be adopted to prevent L. michahellis from accessing the main sources of human food: urban solid waste dumps, aquaculture farms, and fish discards.

Smart manufacturing encompasses a category of manufacturing that employs computer-integrated capabilities and technologies to enhance supply chain optimization, production efficiency, and recyclability. Yet limited studies have been conducted to optimize these prospects from the perspective of low resource countries where such innovative studies have not been adequately explored. This paper aims to examine the implications of smart manufacturing practices (Smart Procurement, Smart Supply Chain, Smart Production Planning and Control, Automation and Industrial Robot, and Supply Chain Configuration) on pro-environmental behaviour and develop a baseline moderated mediation model to explain the relationship between smart manufacturing and pro-environmental behaviour with a role of green dynamic capability, and environmental orientation. This study is anchored on quantitative research approach, deductive reasoning, and explanatory design. Cross – sectional survey data have been obtained from 382 manufacturing companies in Ghana. Our hypotheses have been tested using Structural Equation Modelling and SMART-PLS version 3.8.9. The study has revealed that smart manufacturing practices significantly and positively relate to pro-environmental behaviour. Moreover, green dynamic capability and environmental orientation moderate the relationship between smart manufacturing and pro-environmental behaviour. The implications of the study include the emergence of a baseline model to guide policymakers, practitioners, and academicians to explain the relationship between smart manufacturing and sustainable manufacturing in the context of developing countries. Again, the social implication of the study includes the realisation of decent job and economic growth, responsible consumption and production as well as actions taken to combat climate change.

Suspended and deposited sediments in streams can interfere with filter-feeding caddisfly larvae by reducing feeding sites and feeding efficiency, potentially lowering densities, growth rates, and secondary production of an important trout prey. We conducted field studies at multiple stream sites with differing suspended sediment loads, and a laboratory study conducted under controlled conditions, together designed to examine the role of suspended sediments in the population dynamics and behavior of Brachycentrus occidentalis (Trichoptera: Brachycentridae) larvae in a Minnesota, USA, trout stream. Stream sites that had elevated turbidities and suspended sediments also had significantly more fine bottom substrates and higher substrate embeddedness. In addition, Brachycentrus densities were reduced, growth rates were slower, secondary production was reduced, and overall benthic macroinvertebrate taxa richness was lowest at the site with the highest suspended sediment loading. Colder water temperatures at one site also influenced Brachycentrus production. In 24-hour laboratory studies conducted in recirculating aquaria, the feeding activities of Brachycentrus larvae were reduced and positioning altered under high turbidities (500 nephelometric turbidity units, NTU) relative to low turbidities (50 NTU or lower). High suspended sediment loads have adversely affected filter-feeding caddisfly larvae by embedding and burying preferred coarse feeding substrates, altering their feeding positions and movements during highest flows, and ultimately impacting densities, growth rates, and secondary production.

Over the last two decades, knowledge production, research and reconfiguration of universities have been understood as ways of giving new meanings to the university-society binomial. In this regard, humanities are the subject of multiple debates in the face of ideas about their impact in relation to the "other sciences". Based on these premises, this article sets out to explore possible meanings attributed by researchers to the concepts of commitment, mobilization and transfer of research in humanities in view of the debates on the university-society interaction and the third mission of the university (Alonso, Cuschnir and Napoli, 2021). The methodology used will address bibliographical analysis, theoretical background and statements from different institutions, as well as the analysis of material from four interviews. As a first instance, the preliminary results show that strengthening critical thinking as forms of commitment emerge as central senses, focusing on hungarian characteristics and productions in order to unravel the ways of understanding and imagining Eastern European reality. In this respect, the discussion of certain western knowledge is seen as a task associated with social commitment with public universities as a focus of resistance.

The global energy landscape is undergoing a transformative shift, and the potential of LNG as a major energy source is a topic of intense debate. In order to meet the growing demand for sustainable energy supply, it is crucial to maximize the efficiency and environmental friendliness of the LNG supply chain. This research aims to leverage computational modeling and optimization techniques to enhance the production units involved in LNG production. By harnessing the power of advanced algorithms and simulations, we can identify and implement innovative strategies that minimize energy consumption, reduce greenhouse gas emissions, and enhance the overall sustainability of LNG. Through this study, we seek to uncover novel approaches to address the challenges faced by the LNG industry, including improving operational efficiency, optimizing liquefaction processes, and enhancing the utilization of natural resources. By integrating cutting-edge computational tools and considering environmental factors, we aspire to pave the way for a more sustainable and environmentally friendly future powered by LNG. By exploring the immense potential of computational modeling and optimization, we strive to contribute to the ongoing efforts in advancing energy sustainability and shaping the future of LNG as a crucial global energy source."In this paper, our focus is on simulating and optimizing the process of converting natural gas to LNG. Our goal is to achieve the minimum energy consumption per ton of LNG produced. Through our research, we have identified that utilizing a three-stage exchanger is the most effective approach for minimizing energy consumption in an LNG industrial production unit. Moreover, we have discovered that the outlet pressure from the compressor and the type of refrigerant in the cooling system play significant roles in determining the rate of energy conservation. By carefully considering these factors and optimizing their settings, we can further enhance the overall energy efficiency of the LNG production process. Our research aims to provide valuable insights and guidance to industry professionals and decision-makers in the LNG sector. By implementing the findings of this study, we can contribute to the sustainable development and utilization of LNG as a cleaner and more environmentally energy source. Friendly It's great to see the optimized parameters for the refrigerants and pressure settings in the liquefaction and subcooling cycles. With the mass fraction of 0.89 for methane and 0.14 for ethane in the liquefaction cycle, and 0.59 for methane and 0.3 for nitrogen in the composition for achieving energy efficiency in the LNG production subcooling cycle, The optimized outlet pressure of 650 kPa for the compressors in the liquefaction cycle and 1800 kPa for the subcooling cycle furtherr ccontribute to minimizing energy consumption. Based on your findings, the amount of consumed energy at 14.81 kW per ton of produced LNG highlights the success of the optimization efforts. Reducing the energy consumption per ton of LNG produced is a significant accomplishment towards achieving energy sustainability and environmental friendliness in the LNG industry. These results demonstrate the importance of computational modeling and optimization in identifying the best parameters for eenhancing energy efficiency in LNG production. By implementing these optimized settings, we can work towards a more sustainable future with reduced energy consumption and lower environmental impact

Wolfenden and his coworkers observed the astronomical numbers for the catalytic proficiency of some enzymes. We connected that pinnacle of biological evolution to the universal thermodynamic evolution. We added or multiplied a random noise with chosen rate constants to explore the correlation between dissipation and enzyme efficiency for ten enzymes: beta-galactosidase, glucose isomerase, β-lactamases from three bacterial strains, ketosteroid isomerase, triosephosphate isomerase, and carbonic anhydrase I, II, and T200H. The turnover number kcat and catalytic efficiency kcat/KM are proportional to the overall entropy production – the main parameter from irreversible thermodynamics. For most enzymes with the Michaelis-Menten type cycle kinetics, the best increase in the forward kcat/KM follows after increasing the equilibrium constant of substrate-enzyme association. The Discussion section emphasizes the role of biological evolution in harvesting order (high enzyme efficiency) from disorder (high noise and dissipation). It also connects the applications of the maximum partial entropy production theorem in optimizing enzyme kinetics (D. Juretić "Bioenergetics - A Bridge across Life and Universe") with the present total entropy production role analysis. De novo enzyme design and various attempts to speed up the rate-limiting catalytic steps may profit from our theoretical insights.

One of the challenges with Japanese eel (Anguilla japonica) seedling production is the slow growth of leptocephali. This issue arises from a fundamental problem with the current methods for raising leptocephali. In essence, the balance between the amount of energy obtained from feeding and kinetic energy significantly differs from that in the natural environment. This slow growth results in a reduced size of metamorphosable leptocephalus and ultimately leads to smaller artificial glass eels. We hypothesize that this reduction in the size of artificial glass eels may be attributed to time-related stress during rearing. Therefore, we propose the "time-over theory" based on a series of phenomena.

The Jeryak, a hybrid offspring of Gannan yak and Jersey cattle, exhibits evident hybrid advantages over the Gannan yak in terms of production performance and other various aspects. The small non-coding RNAs known as miRNAs exert a significant regulatory influence on gene expression post-transcriptionally. However, the regulatory mechanism of miRNA associated with muscle development in Jeryak remains elusive. To elucidate the regulatory role of miRNAs in orches-trating the skeletal muscle development in Jeryak, we selected dorsal longissimus muscle tissues from Gannan yak and Jeryak for transcriptome sequencing analysis. A total of 230 (DE)miRNAs and 1819 differentially expressed mRNAs (DEMs) were identified in the longest dorsal muscle of Gannan yak and Jeryak. The functional enrichment analysis revealed a significantly enrichment of target genes from differentially expressed (DE)miRNAs and DEMs in signaling pathways associ-ated with muscle growth, such as the Ras signaling pathway and the MAPK signaling pathway. The network of interactions between miRNA and mRNA suggested that some differentially ex-pressed miRNAs, including miR-2478-z, miR-339-x, novel-m0036-3p and novel-m0037-3p, played a pivotal role in facilitating muscle development. These findings help us to deepen our under-standing of the hybrid dominance of Jeryaks and provide a theoretical basis for further research on the regulatory mechanisms of miRNAs associated with Jeryak muscle growth and development.

The use of nitrogen fertilizers can be a source of environmental pollution; the use of or-ganomineral fertilizers can become a nutritional source for crops, ensuring sustainability in the production system. Another alternative approach is through the inoculation and co-inoculation of microorganisms. The objective was to evaluate the development, nutrition, and agronomic yield of common bean through fertilization with organomineral formula "FMO" derived from sewage sludge biosolids, combined with Rhizobium tropici inoculation and co-inoculation with Azospirillum brasilense techniques. Three bean cultivars from different commercial groups, Pérola, BRS Esteio, and BRS Pitanga, were tested. They were subjected to organomineral fertilizer application, orga-nomineral fertilizer application combined with seed inoculation with R. tropici and re-inoculation; seed co-inoculation with R. tropici + A. brasilense prior to sowing, and foliar re-inoculation with R. tropici + A. brasilense. Seed inoculation, combined with foliar re-inoculation at the V4 stage, resulted in higher productivity of common bean. The combination of R. tropici with co-inoculation with A. brasilense generally led to increased productivity compared to mineral nitrogen fertilization. The use of organomineral fertilizer alone enabled gains in development, as well as productivity. The Pérola bean cultivar showed better adaptation to the applied treatments.

The contractual relationship between the processing firm and the broiler smallholder presents incessant conflicts of interest and inequality due to technical and economic discrepancies, leading to an undervaluation of the producers' remuneration. This study aims to deepen the discussions in searching for a more balanced monetary exchange between processing firms and broiler smallholders based on scientific aspects. For this, the Emergy theory and its concepts were used in considering a representative broiler production system at Concórdia, Santa Catarina, Brazil. This study suggests the inclusion of cultural information in the Emergy-based model calculation. For the broiler smallholder, cultural information showed the highest Emergy contribution (62.95%; transformity = 1.73 ×10^8). However, only considering cultural information was not sufficient to increase the sustainability of the broiler production system. The results highlight an imbalance of the monetary exchange between agroindustry and broiler smallholder payment for both the economic and Emergy-based payment. Both estimated payments were higher than the practiced payment value (0.24 USD/broiler as well as 0.32 USD/broiler and 1.62 EmUSD/broiler, respectively). Thus, evaluating the “(eco)cost” in Emergy-based accounting recognizes that production depends not only on tangible physical resources but also on knowledge, skills and information (“iceberg of value” thinking). Policy and decision makers must, therefore consider the promotion of public policies that subside initiatives, including social and environmental welfare programmes.

In recent years the yield of fruits and vegetables have been decreasing in Colombia, threatening national food security. Analysis of crop production data may lead to identifying cropping systems that have shown better adaptability to changes in climatic and non-climatic factors associated with agricultural production. The open database AGRONET keeps data of the agricultural activities conducted in Colombia, allowing to find the information organized by crops, regions and years; each row of the database registers farm information in Colombia. Aiming to identify resilient crops systems, agricultural data of fruits and vegetables were analyzed. First, trends in crop production were studied by year and locations, detecting the regions and crops with highest yields in the period from 2006 until 2020. Then, mixed linear regression and principal components analysis were applied to elucidate the relation between non-climatic factors and crop yield. In Colombia, vegetable production was more efficient than fruits, observing yields of 10.23 and 13.33 t ha^-1, respectively. On the other hand, the Colombian central region showed high yields for vegetables, while for fruits this was exhibited in northern and eastern locations. In the present study, yield variation responded to changes in the location of crop systems, while years had no effect on vegetable production. Furthermore, the price of the agricultural product and the cost of fertilizers were associated with the yield of the analyzed crops systems. In Colombia, carrot, cabbage, tomato papaya and pineapple are resilient crops whose yield increases especially by the regions where they are cultivated.

In Burkina Faso, the infant flours produced are intended for weaning-age and malnourished children. This study was to evaluate the management of infant flour production in Ouagadougou. A survey was conducted among the production units to determine the raw materials used in the production of infant flours, the production processes, the methods of conservation of raw materials and infant flours, the types of infant flours produced as well as their packaging. The results showed that 45.45% of the production units surveyed were of the semi-industrial type against 54.54% from the artisanal and CREN types. Among the raw materials, the most used cereals were millet, sorghum and maize. As for legumes, peanuts and soybeans were the most used at respectively 35% and 31%. For the conservation of raw materials, 85.71% of infant flour producers had storage warehouses and 66% used storage pesticides. These flours produced were intended for children of wean age (37.14%) and children in nutritional recovery (62.86%). Flours were stored in an airy (94.29%), dry area/environment (88.57%) and in the presence of light (91.43%). All the results of this survey reflect that efforts are still expected to further improve the nutritional and sanitary quality of the infant flours produced.

The overexploitation of fossil fuels and their negative environmental impact has attracted the attention of researchers worldwide to propose alternatives to produce bioenergy. Microbial fuel cells (MFCs) systems are sustainable biotechnologies that use bacterial activity to break down organic matter while generating bioelectricity. MFCs have bioelectricity from domestic wastewater (DWW), municipal wastewater (MWW), and potato and fruit waste, reducing environmental contamination and decreasing energy consumption and treatment cost. This review focuses on the recent advancements regarding the designs and configurations, the operation mode of MFCs, and their capacity to produce bioelectricity (e.g., 2203 mW/m2) and fuels (i.e., H2: 438.7 mL/g and CH4: 358.7 mL/g, respectively). Besides, this review highlights practical applications, challenges, techno-economic, and life cycle assessments (LCA) of MFCs. Despite MFC's promising biotechnology, great efforts should be made to implement it in real-time and commercialization.

Herein, we have fabricated graphitic carbon nitride (g-C3N4) nanosheets with embedded ZnCdS nanoparticles to form a type II heterojunction using a facile synthesis approach and used for photocatalytic H2 production. The morphologies, chemical structure and optical properties of the obtained g-C3N4‒ZnCdS samples were characterized by a battery of techniques such as, TEM, XRD, XPS and UV-Vis DRS. The as-synthesized g-C3N4‒ZnCdS, photocatalyst exhibits the highest hydrogen production rate of 108.9 μmol·g-1·h-1 compared to individual components (g-C3N4: 13.5 μmol·g-1·h-1, ZnCdS: 45.3 μmol·g-1·h-1). The improvement of its photocatalytic activity is mainly attributed to the heterojunction formation and resulting synergistic effect, which provide more channels for charge carrier migration and reduce the recombination of photogenerated electrons and holes. Meanwhile, the g-C3N4‒ZnCdS heterojunction catalyst also showed higher stability over a number of repeated cycles. Our work sheds insight of using g-C3N4 and metal sulfide combination to develop low-cost, efficient, visible-light active hydrogen production photocatalysts.

In the era of Industry 4.0, the focus on optimizing manufacturing processes is crucial. This study provides a comprehensive analysis of the EnPAS system, a proprietary automated control and monitoring tool developed by KAD3, implemented in the production process of Corten steel furnishings - the "Lila" chair and "Line" planter. Designed to enhance operational efficiency, EnPAS facilitates improved workflow by streamlining production stages and reducing downtime. The research design involves a comparative analysis of the workshop's production process, both before and after the implementation of the EnPAS system. Elements such as de-greasing, oxidation, and finishing stages, among others, were examined. The implementation of the EnPAS system led to a significant reduction in the total production time for both products. Further, there was a substantial decrease in waiting time and setup time. These findings unequivocally indicate the transformative impact of the EnPAS system on the manufacturing process, showcasing its potential in driving efficiency improvements, reducing production times, and increasing output. The study underscores the importance of leveraging such advanced control and monitoring tools to optimize modern manufacturing processes and does not exaggerate conclusions not backed by the research.

Climate change is a large and challenging collective action problem facing the world today. This seminar review impacts of climate change on r yield of major cereal crops. Literatures have indicated that climate change would likely have positive impact in the highland agro-ecology in the short run. However, in the long run climate change will have negative impact in all agro-ecology. Negative impacts will be high in low land agro-ecology. Failure to prepare for climate variability can seriously affect the livelihood of smallholder farmers. Ethiopia by enacting Climate-Resilient Green Economy strategy and National Adaptation Plan aims to minimize the impacts of CC. Despite the existing adaptation and mitigation strategies negative impacts of climate change on agriculture especially on cereal crop production is continued. Thus, both private and public investment on adaptation strategies should be expanded more. Studies regarding the impacts of climate change on labour productivity, labour market, its distributional (which section society mostly by climate change?) and why the existing adaptation strategies are not successful? are not well studied, as most literature are focused on impact of climate change on yield, its adaptation and mitigation strategies.

In order to improve the adaptability of broilers to low-temperature environments and their ability to resist acute cold stress (ACS), 240 one-day-old broilers were selected and randomly divided into three groups. The control treatment (CC) was raised at the conventional feeding temperature from 1-43 days (d), the cold stimulation treatments (CS) were kept at 3 °C below the temperature of CC at 1-d intervals for 3 and 6 hours from 15 to 35 d, namely CS3 and CS6, respectively. Then all broilers were kept at 20 °C from 36 to 43 d. ACS was then carried out at 44 d, and the ambient temperature was dropped to 10 °C for 6 hours. The study investigated the production perfor-mance, as well as levels of intestinal barrier genes (including Claudin-1, E-cadherin, Occludin, ZO-1, ZO-2 and Mucin2), secretory IgA in duodenum and jejunum, and immunoglobulins (IgA and IgG) in serum. The results showed that IMCS could increase the daily weight gain and decrease the feed conversion ratio. During the IMCS, the expression levels of intestinal barrier genes were up-regulated and the content of secretory IgA was increased. When IMCS ceased for one week, the level of immunoglobulins in serum stabilized, and the expression levels of Occludin, ZO-2 and Mucin2 still maintained high levels. After ACS, broilers that received IMCS training maintained the high levels of intestinal barrier genes and secretory IgA.

This work addresses the lot-sizing and production scheduling problem of multi-stage multi-product food industrial facilities. More specifically, the production scheduling problem of the semi-continuous yogurt production process, for two large-scale Greek dairy industries, is considered. Production scheduling decisions are taken using two approaches: i) an optimization and ii) a rule-based approach, followed by a comparative study. A MILP model is applied for the optimization of short-term production scheduling of the two industries. Then, the same problems are solved using the commercial scheduling tool ScheduleProTM, which derives scheduling decisions, using simulation-based techniques and empirical rules. It is concluded that both methods, despite having their advantages and disadvantages, are suitable for addressing complex food industrial scheduling problems. The optimization-based approach leads to better results in terms of operating cost reduction. On the other hand, the complexity of the problem and the experience of production engineers and plant operators can significantly impact the quality of the obtained solutions for the rule-based approach.

Economic globalisation has promoted the extensive circulation of commodities around the world, and international trade has increasingly been a strong booster for economic growth in China. As an foundation for national economy, the shift of agricultural products (AP) from production to distribution has become the focus of agricultural development, and in recent years, the international trade of agricultural products in China has been the highest in the world. While, cross-border e-commerce (CBE), as one of the important modes of agricultural products circulation, has brought new opportunities for China's fresh agricultural products to carry out online import and export trade under the favourable policies continuously introduced internationally. This research analyses status of APCBE in Yunnan Province, China, and propose strategies for developing CBE of Yunnan AP.

Cobalamin is an essential nutrient required for the normal functioning of cells. Its deficiency can lead to various pathological states. Hydroxocobalamin (HOCbl) and cyanocobalamin (CNCbl) are the forms of vitamin B12 that are most commonly used for supplementation. There is substantial evidence indicating that cobalamins can both suppress and promote oxidative stress; however, the mechanisms underlying these effects are poorly understood. Here, it was shown that the oxidation of thiols catalyzed by HOCbl and CNCbl is accompanied by ROS production and induces, under certain conditions, oxidative stress and cell death. The form of vitamin B12 and the structure of thiol play a decisive role in these processes. It was found that the mechanisms and kinetics of thiol oxidation catalyzed by HOCbl and CNCbl differ substantially. It was discussed how these differences may explain different levels of ROS production and cytotoxicity induced by combinations of thiols with HOCbl and CNCbl. On the whole, the data obtained provide a new insight into the redox processes in which cobalamins are involved and might be helpful in developing new approaches to the treatment of some cobalamin-responsive disorders in which oxidative stress is an important component. In addition, these data may be useful for a better understanding of mechanisms underlying induction of different types of death of cancer cells and in a search for new targets for anticancer therapy.

Several red seaweeds have shown to inhibit enteric CH₄ production; however, adaptation of fermentation parameters to their presence is not well understood. The objective of this study was to examine the effect of three red seaweeds (Asparargopsis taxiformis, Mazzaella japonica, Palmaria mollis) on in vitro fermentation, CH₄ production, and adaptation using the rumen simulation technique (RUSITEC). The experiment was conducted as a completely randomized design with four treatments, duplicated in two identical RUSITEC apparatus equipped with eight fermenter vessels each. The four treatments included the control (barley straw and barley silage) and the three red seaweeds added to the control diet at 2% diet DM. The experimental period was divided into four phases including a baseline phase (d 0-7; no seaweed included), adaptation phase (d 8-11; seaweed included in treatment vessels), intermediate phase (d 12-16) and a stable phase (d 17-21). The digestibility of organic matter (P = 0.04) and neutral detergent fibre (P = 0.05) was decreased by A. taxiformis during the adaptation phase, but returned to control levels in the stable phase. A. taxiformis supplementation resulted in a decrease (P < 0.001) in molar proportions of acetate, propionate and total volatile fatty acid (VFA) production, with an increase in molar proportions of butyrate, caproate, and valerate; the other seaweeds had no effect (P > 0.05) on molar proportions or production of individual VFA. A. taxiformis was the only seaweed to suppress CH₄ production (P < 0.001), with the suppressive effect increasing (P < 0.001) across phases. Similarly, A. taxiformis increased (P < 0.001) the production of hydrogen (H₂, %, mL/d) across the adaptation, intermediate and stable phases, with the intermediate and stable phases having greater H₂ production than the adaptation phase. In conclusion, M. japonica and P. mollis did not impact rumen fermentation or inhibit CH₄ production within the RUSITEC. In contrast, we conclude that A. taxiformis is an effective CH₄ inhibitor and its introduction to the ruminal environment requires a period of adaptation; however, the large magnitude of CH₄ suppression by A. taxiformis inhibits VFA synthesis, which may restrict production performance in vivo.

Managers are often faced with the task of improving the management of the production 17process in order to maintain the sustainability of production efficiency in a highly competitive en-18vironment. The submitted contribution deals with the design of a system that will support them in 19the selection of progressive methods and technologies in order to improve the management of pro-20duction processes. Managers often follow new trends in this issue, but it is not easy to work on the 21knowledge that proven progressive technologies can bring them higher efficiency. The presented system is based on the use of knowledge of existing solutions of manufacturers of automotive components, where companies solve similar problems in production management. The mix of methods and technologies used in the management of production processes brings companies different results in the achieved efficiency. The proposed system for supporting the selection of the production management method and technology is designed from blocks of data collection, benchmarking of the performance of production processes of industrial enterprises, and further from data mining technology to obtain knowledge about the effect on efficiency from already implemented technologies. The last blocks help to examine the differences in the implementation of the same methods and technologies and allow to present the obtained results to the manager in the form of recommendations for choosing a suitable progressive method and technology.

While many practitioners and experts understand the risks associated with low urban tree diversity, they often lack the ability to rectify issues they encounter on their own. The current system of tree production and procurement is complex – shaped by market pressures, nursery and site constraints, local governance, and differing professional objectives among those who grow, specify, and plant trees. To understand this complexity as well as constraints to- and opportunities for increasing urban tree diversity, we conducted a series of focus groups comprised of nursery growers, landscape architects, and urban foresters. Our results highlight a significant list of considerations and constraints to diversity (both shared among green industries and some specific to growers or purchasers). More importantly, in discussing our findings we outline actionable strategies for increasing urban tree diversity.

Theoretic and empirical studies show that social surroundings experienced by male insects during their larval or adult stage can influence their testicular investment in diverse ways. Although insect pupae do not feed and crawl, they can communicate using sex-specific and/or non-sex specific cues. Yet, it is unknown, in any insect, whether and how male pupae can fine-tune their resource allocation to sperm production and testis size in response to socio-sexual environment. We investigated this question using a moth, Ephestia kuehniella, which produces fertile eupyrene sperm and unfertile apyrene sperm. We held male pupae individually or in groups with different sex ratios, and dissected adults upon eclosion, measured their testis size, and counted both types of sperm. We demonstrated that after exposure to conspecific pupal cues regardless of sex, male pupae increased production of eupyrenes and apyrenes at the same rate but kept testis size unchanged. We suggest that testis size is fixed after pupation because most morphological traits are formed during the larval stage, allowing little room for pupae to adjust testis size. Like adults, male pupae with fully grown testes have sufficient resources to produce more sperm of both types according to the perceived increase of sperm competition risk.

Biodiesel has caught the attention of many researchers because it has great potential to be sustainable fossil fuel substitute. Biodiesel has non-toxic and renewable nature and has been proven to emit less amount of environmentally harmful emissions such as hydrocarbons (HC), and carbon monoxide (CO), as well as smoke particles during combustion. Problems related to global warming caused by greenhouse gas (GHG) emissions could also be solved by utilizing biodiesel as a daily energy source. However, the expensive cost of biodiesel production, mainly because of the cost of natural feedstock, holds the potential of biodiesel commercialization. The selection of natural sources of biodiesel should be made with observations from economic, agricultural, and technical perspectives to obtain one feasible biodiesel with superior characteristics. This review paper presents a detailed overview of various natural sources, their physicochemical properties, as well as the performance, emission, and combustion characteristics of biodiesel when used in a diesel engine. The recent progress in studies about natural feedstocks and manufacturing methods used in biodiesel production were evaluated in detail. Finally, the findings of the present work reveal that transesterification is currently the most superior and commonly used biodiesel production method compared to other methods available.

For some decades, the scientific community has been looking for alternatives to the use of fossil fuels that allow the planet's sustainable and environmentally friendly development. To do this, attempts have been made to mimic some processes that occur in nature, among which the photosystem-II stands out, which allows water splitting operating with different steps to generate oxygen and hydrogen. This research presents promising results using synthetic catalysts, which try to simulate some natural processes, and which are based on Au@ZnO-graphene compounds. These catalysts were prepared by incorporating different amounts of gold nanoparticles (1 wt.%, 3 wt.%, 5 wt.%, 10 wt.%) and graphene (1 wt.%) on the surface of synthesized zinc oxide nanowires (ZnO NWs), and zinc oxide nanoparticles (ZnO NPs), along with a commercial form (commercial ZnO) for comparison purposes. The highest amount of hydrogen (1,127 µmol/hg) was reported by ZnO NWs with a gold and graphene loadings of 10 wt.% and 1 wt.%, respectively, under irradiation at 400 nm. Quantities of 759 µmol / hg and 709 µmol / hg were obtained with catalysts based on ZnO NPs and commercial ZnO, respectively. The photocatalytic activity of all composites increased with respect to the bare semiconductors, being 2.5 times higher in ZnO NWs, 8.8 times for ZnO NPs and 7.5 times for commercial ZnO. The high photocatalytic activity of the catalysts is attributed, mainly, to the synergism between the different amount of gold and graphene incorporated, and the surface area of the composites.

The paper presents design methodology for the production process of a new product from the point of view of the assembly operations technology criterion (Design for Assembly - DFA) in the conditions of high-volume production. Mentioned are DFA methods and techniques used in the implementation of a new product. Author presents a new method to assess design for manufacturability based on fuzzy variables based on fuzzy variables. An example was given to illustrate the proposed course of action

Results of rapid economic growth, China, USA, and India have become the largest energy stealer and the greatest emitter of CO₂ in the world and burn over 45% of global fuels in 2016. Meanwhile, the developing strategies of 24 polluted countries to decrease the energy consumption without additional economic output. This paper is exploring the effect of world top polluted countries C0₂ emission and their GDP and the production of electricity by energy indicators. The GLM model is not predict logistic and probit analysis directly; instead, it is mainly used for instinct to response of CO₂ emission, using data for the period 1968-2017. The huge production of electricity will cause of abnormal CO₂; this study offers true indication of exploring consumption of energy issues from the perspective of Granger casual and a positive unidirectional causality is detected between energy consumption to economic growth, while short-run bidirectional casualty exists among energy indicators.

Climate change is a buzzword in the world. Scientist has approved it as global warming with its projection of undesired and unpredicted frequent extreme events and their vulnerabilities not only at present but also at future. There is an assumption of occurrence of adaptive capacity and behavior of farmers in agriculture production activity at some extent to neutralize climate change vulnerabilities of flood and landslides on paddy production. This paper empirically examines the effects of climate change in paddy production and farmer’s adaptive behaviors to neutralize such climatic shocks and events in paddy production by employing CD production function based econometric model. The study employed primary data collected through 642 household surveys. The study finds that climatic shocks and events have huge loss (60%) in paddy production and revenue income in such plot where farmers have not indigenous knowledge and practices. But both small and larger farmers who have adaptive capacity and behavior with their indigenous knowledge have less loss in paddy production and revenue income, although they have heterogeneity in their socio economic characteristics (income, asset holding, literacy, experience, land holding and age). The farmers who have used adaptive behavior have indigenous knowledge and experiences including bamboo wall construction to control flood and landslides and seed change to resist climatic shocks and events. In hilly region, the farmers have not sufficient alternative measures, except both adaptive measures because of their poverty, illiteracy and remote locations. The study finds their higher effective level to minimize vulnerabilities to paddy production and revenue per farm plot, although these adaptive behaviors are cost effective and local entity. Comparatively, bamboo wall construction is more effective measure in the paddy production than others are (seed switch) to minimize the flooding materials from the flood and the landslides. Thus, low cost indigenous adaption behavior of farmers is effective measure to climate change and climate change induced disasters and events vulnerability in paddy production.

The paper analyzes the actions that improve innovativeness in production enterprises in the Silesian province. Innovation is one of the elements that allows to achieve a competitive advantage. It turns out justified to research various factors that are important in improving innovativeness. The research includes selected production enterprises in the Silesian province, adopting the descriptive statistics measures and statistic tests: random sample test, chi-square independence test and the non-parametric Kruskal-Wallis test based on a survey questionnaire. As part of the most important factors determining the possibilities of innovation by manufacturing companies were detected contacts with other enterprises, R&D centers and counseling institutions, competitive position of the company and creating appropriate incentive systems.

Background and Objectives: Due to huge demand and availability of Banana, innovative cost effective method is necessary to promote and smoothen the banana production among farmers commercially mitigating the demand. Method and Materials: In this study, we feed cow dung mixture along with Urea, TSP, MoP, water to the distal part of rachis after cutting down male bud as soon as the female flowers matured into fruits (T1). The effect of this method was then compared with two control groups; one with the same strategy except fertilizer applied on root following ring method (C1, Positive control) and another was male flower untouched without applying fertilizer on rachis or root (C2, Negative control). Results and Conclusion: T1 showed more than double increase in length than controls. In the same way, in case of shape (diameter), T1 (0.46 cm) showed twice as better growth in the C1 (0.22 cm) and C2 (0.18 cm). Trend analysis showed the test group T1 curve is much steeper than the control groups suggesting faster growth rate than the other two. Finally, the cost of fertilizers for T1 per plant was estimated 0.091 USD while for positive control C1 it was 2.9 USD. This study shows an approach to be effective and economic comparing to traditional method of fertilizer application, which can be adapted as a new method of banana production.

The development of new target stations for radioisotope production based on a dedicated 70~MeV commercial cyclotron is described. Currently known as the South African Isotope Facility (SAIF), this initiative will free the existing separated-sector cyclotron (SSC) at iThemba LABS (near Cape Town) to mainly pursue research activities in nuclear physics and radiobiology. It is foreseen that the completed SAIF facility will realize a three-fold increase in radioisotope production capacity compared to the current programme based on the SSC.