The use of friction-based Beam-to-Column Connections (BCC)s for earthquake-resistant Moment Resistant Frames (MRFs), aiming at eliminating damage to beam end sections due to the development of plastic hinges, has taken hold since the early eighties. Different technical solutions were proposed for steel structures, some were also designed for timber structures, while few more recent studies concern friction joints employed in reinforced concrete structures. Research aimed at characterizing the behavior of joints has focused on the evaluation of the tribological properties of the friction materials, coefficient of friction, shape and stability of the hysteresis cycles, influence of the temperature, speed of load application, effects of the application method, stability of preload, the influence of seismic excitation characteristics on the structural response, statistical characterization of amplitude and frequency of the slip excursion during seismic excitation. Studies aimed at identifying the design parameters capable of optimizing performance have focused attention mainly on the slip threshold, device stiffness, and deformation capacity. This review compiles the main and most recent solutions developed for MRFs. Furthermore, the pros and cons for each solution are highlighted, focusing on the dissipative capacity, shape and stability of hysteresis loops. In addition, the common issues affecting all friction connections, namely characteristics of friction shims and the role of bolt preload, are discussed. Based on the above considerations, a guideline can be outlined, which can help to choose the appropriate solutions for beam-to-column connections for MRFs.

Psychiatric nurses were challenged with high levels of stress, which in turn lower their professional quality of life (ProQoL) and job satisfaction and increase their intention to leave job at psychiatric settings. Adequate level of ProQoL improve patient care provision. The purpose is to assess the levels, relationships, and predictors of professional quality of life of Jordanian psychiatric nurses and their job satisfaction and intention to leave job. A descriptive cross-sectional design was used to collect data using the Professional Quality of Life Scale-5 from a convenience sample of 144 psychiatric nurses. Results showed that the mean score of compassion satisfaction (CS), burnout (BO), and secondary traumatic stress (STS) were 35.21, 27.0, and 26.36, respectively. The mean scores of intention to leave and job satisfaction were 2.33, and 3.7, respectively. Income level, educational level, intention to leave, and job satisfaction were significantly differing in CS dimension. Nurses’ age, intention to leave, and job satisfaction were significantly differing in BO. Nurses’ age, years of experience, frequent C-shift worked, and work affiliation were different in STS. Burnout, STS, and educational level predicted CS. CS, STS, job satisfaction, and level of education predicted BO. BO, CS, and frequent working night C-shift predicted STS. More studies are needed to assess the factors that affect ProQoL among psychiatric nurses, and to evaluate interventional programs that improve quality of life of psychiatric nurses. This is important in retaining nurses and increasing their job satisfaction. Jordanian psychiatric nurses reported moderate level of (ProQoL), high level of job satisfaction, and low intention to leave job. There is a need to enhance (ProQoL).

We used ab initio molecular dynamics simulations to compare the activation of 2-propanol on the low index Co3O4 (111), (110) and (001) surfaces in dry conditions. The thermal and surface assisted decomposition of a film of 2-propanol to 2-propoxide on the B-termination of each surface was monitored and analyzed. The investigations suggest an activity order of Co3O4 (111) > (110) > (001). On the B-terminated (111) surface, full dissociation of all 2-propanol molecules at the interface is observed, accompanied by a Mars-van Krevelen-type mechanism upon hydroxylation of the surface. On the (110) surface, 2-propanol dissociation is driven by temperature, which activates the two-fold coordinatively unsaturated surface oxygens. The (001) surface on which almost no dissociation occurs is the least active. No formation of acetone is observed in the simulations conditions.

In colorectal cancer (CRC) patients, apart from fatigue, psychological and physical symptoms often converge, affecting their quality of life and ability to work. Our objective was to ascertain symptom clusters within a year following CRC treatment and their longitudinal association with persistent fatigue and reduced work ability at the 3-month follow-up. We used data from MIRANDA, a multicenter cohort study enrolling adult CRC patients who are starting a 3-week in-patient rehabilitation within a year post-curative CRC treatment. Participants completed questionnaires evaluating symptoms at the start of rehabilitation (baseline) and after three months. We performed an exploratory factor analysis to analyze the clustering of symptoms at baseline. Longitudinal analysis was performed using a multivariable linear regression model with dichotomized symptoms at baseline as independent variables, and the change of fatigue and ability to work from baseline to 3-month-follow-up as separate outcomes, adjusted for covariates. We identified six symptom clusters: fatigue, gastrointestinal symptoms, pain, psychosocial symptoms, urinary symptoms, and chemotherapy side effects. At least one symptom from each factor was associated with higher fatigue or reduced ability to work at the 3-month follow-up. This study highlights the interplay of multiple symptoms in influencing fatigue and work ability among CRC patients post rehabilitation.

Veterans face difficulties accessing vital health and community services, especially in rural areas. Autonomous vehicles (AVs) can revolutionize transportation by enhancing access, safety and efficiency. Yet, there is limited knowledge about how Veterans perceive AVs. This study fills this gap by assessing Veterans' AV perceptions before and after exposure to an autonomous shuttle (AS). Using a multi-method approach, 23 participants completed pre- and post-AS Autonomous Vehicle User Perception Survey (AVUPS), with 10 participants also taking part in post-AS focus groups. Following exposure to the AS, differences were observed for three out of the four AVUPS domains: an increase in Intention to Use (p < 0.01), a decrease in Perceived Barriers (p < 0.05), and an increase in Total Acceptance (p = 0.01); Well-being remained unchanged (p = 0.81). Feedback from focus groups uncovered six qualitative themes: Perceived Benefits (n=70), Safety (n=66), Shuttle Experience (n=47), AV Adoption (n=44), Experience with AVs (n=17), and Perception Change (n=10). This study underscores AVs' potential to alleviate transportation challenges faced by Veterans, contributing to more inclusive transportation solutions. The research offers insights for future policies and interventions aimed at integrating AV technology into the transportation system, particularly for mobility-vulnerable Veterans in rural and urban settings.

The methanation of CO2 is of great interest in power-to-gas systems and contributes to the mitigation of climate change through carbon dioxide capture and the subsequent production of high value-added products. This study investigated CO2 methanation with three Ni catalysts supported on Al2O3 and ZrO2, which were simulated using a mathematical model of a packed bed reactor designed based on their chemical kinetics reported in the literature. The simulated reactive system was fed with syngas obtained from residual coffee pulp, obtained after solvent phytochemical extraction process, under several gasification conditions. The results reflect a high incidence of catalyst support, preparation method, and syngas composition on CO2 conversion and CH4 selectivity. For all the syngas compositions, Ni/ZrO2 catalysts show the best values for CO2 conversion and CH4 selectivity for Ni/Al2O3 catalyst.

Purpose: This study evaluates the performance of the Early Intervention Physiotherapist Framework (EIPF) for injured workers. This study provides a proper follow-up period (3 years) to examine the impacts of the EIPF program on injury outcomes such as return to work (RTW) and time to RTW. This study also identifies the factors influencing the outcomes. Methods: The study was conducted on data collected from compensation claims of people who were injured at work in Victoria, Australia. Injured workers who commenced their compensation claims after the first of January 2010 and had their initial physiotherapy consultation after the first of August 2014 are included. To conduct the comparison, we divided the injured workers into two groups: physiotherapy services provided by EIPF-trained physiotherapists (EP) and regular physiotherapists (RP) over the three-year intervention period. We used three different statistical analysis methods to evaluate the performance of the EIPF program. We used descriptive statistics to compare two groups based on physiotherapy services and injury outcomes. We also completed survival analysis using Kaplan-Meier curves in terms of time to RTW. We developed univariate and multivariate regression models to investigate whether the difference in outcomes achieved after adjusting for significantly associated variables. Results: The results showed that physiotherapists in the EP group on average dealt with more claims (over twice as many) than those in the RP group. Time to RTW for the injured workers treated by the EP group was significantly lower than for those who were treated by the RP group, indicated by descriptive, survival and regression analyses. Earlier intervention by physiotherapists led to earlier RTW. Conclusion: This evaluation showed that the EIPF program achieved successful injury outcomes three years after implementation. Motivating physiotherapists to intervene earlier in the recovery process of injured workers by initial consultation helps to improve injury outcomes.

We are living in a business context characterized by change, which today behaves with an unprecedented intensity, driven by the technological revolution and increased competition. As a result, increasingly large and complex companies are facing profound transformation processes in which the role of the human factor and of managers in particular, due to their high capacity to impact the organization, is essential. In response to this reality, the literature has developed a large number of approaches from different areas of knowledge: from business economics to psychology, including technical disciplines. This article offers a classification of these approaches that provides an overview of research on the role of managers in change management.

Product assembly is usually one of the last steps in the entire production process. This activity is typically entrusted to assembly workers because it is generally not possible to automate every type of product. For complex products, assembly can take a long time until the fitter learns the procedure and is able to assemble the product on his own. This contribution presents a cus-tom-developed system that enables controlled assembly of the extruder and can be used for complex and diverse products. The system serves to guide the fitter precisely and shows him which part to use at which time. The proposed system will show and describe on the display all necessary assembly steps and parts. Two-step verification is used to ensure that the correct part is picked from the stack. The contribution is supported by the implementation of a case study in a small company with a sample of 30 employees, which demonstrates that the proposed system shortens the extruder assembly time and significantly reduces the error rate. The presented solution is scalable and flexible, as it can be easily adapted to display the assembly steps of another product.

Aim: to provide a comprehensive overview of the existing literature concerning the applications of positron emission tomography (PET)-radiomics in lung cancer patients candidates or undergoing immunotherapy. Materials and Methods: A systematic review was conducted on databases and web sources. English-language original articles were considered. The title and abstract were in-dependently reviewed to evaluate study inclusion. Papers duplicate, out-of-topic, review or edi-torials articles and letters to editors were excluded. For each study, the radiomics analysis was assessed based on the relies on radiomics quality score (RQS 2.0). The review was registered on the PROSPERO database with the number CRD42023402302. Results: 15 papers were included, 13 were qualified as conventional radiomics approaches, and two were as Deep Learning radiomics. The content of each study was different, indeed, 7 papers investigated the potential role of radiomics to predict PD-L1 expression and tumor microenvironment before starting immunotherapy. Moreo-ver, 2 were relative to the prediction of response and 4 investigated the utility of radiomics to predict the response to immunotherapy. Finally, 2 papers were relative to the prediction of adverse events due to the immunotherapy. Conclusions: radiomics is promising in the evaluation of TME and for the prediction of response to immunotherapy, but some limitations should be overpassed.

Access to healthcare services is an essential component of promoting public health and sustainable development. Our aim was to assess socio-demographic correlates of barriers to access healthcare services among children in Albania, a post-communist country in Europe. An online survey was conducted in September 2022, including a nationwide representative sample of 7831 schoolchildren (≈54% girls) pertinent to grades 6-9 from all regions of Albania. A structured and anonymous questionnaire was administered to all children inquiring about a range of potential barriers to access healthcare services. Overall, about 42% of the children reported that they had barriers to access healthcare services. There were no gender differences, but significant: ethnic differences (51% among Roma/Egyptian children vs. 42% among the general sample of the children); urban/rural differences (46% rural vs. 39% urban); and socioeconomic differences (52% among children with a lower maternal education vs. 31% among children with a higher maternal education; 66% among children from poor families vs. 35% among children with a higher family income). In transitional Albania, children residing in rural areas, children from Roma and/or Egyptian communities and especially those pertinent to low socioeconomic families report considerably more barriers to access healthcare services, which is a cause of concern.

Self-employed individuals comprise around 15% of Canada’s workforce. For those with cancer, frequent functional loss and diminished work ability due to side effects of the disease and its treatment significantly impact their well-being and business vitality. Compared to salaried can-cer survivors, the self-employed experience greater reductions in work hours and up to 48% greater income loss, yet most research addresses the former population. To describe self-employed Canadian cancer survivors’ experiences continuing and returning to work, our quali-tative study examines their strategic efforts to continue working throughout the disease trajecto-ry or return to work post-recovery. Employing an interpretive description approach and an in-terview guide based on a vocational rehabilitation model for cancer survivors, we analyze data from 23 participants—both French- and English-speaking—from six Canadian provinces, with eight different job types and nine different cancer diagnoses. Our constant comparative analysis of the transcribed interviews reveals four major themes and twelve sub-themes: Impact of can-cer on the self-employed function (physical, cognitive, and psychological), on their ability to maintain their business, and financial well-being, and facilitating factors for working with can-cer. Cancer disclosure and non-disclosure were both deemed viable strategies, but ceasing work was not. We thus recommend professional support for self-employed cancer survivors in plan-ning any necessary business modifications to accommodate their condition and cancer treatment to lessen the negative impact of cancer on self and on their business well-being.

Background: The COVID-19 pandemic has changed the way dentistry has been practiced world over , this study sought to assess the impact of the COVID-19 pandemic on the patterns of attendance for dental treatment in a large hospital in Kuwait compare them to data from the year prior to the pandemic Methods: A total of 176,690 appointment records of 34,250 patients presenting to the AlJahra specialist hospital, Kuwait for dental treatment from April 2019 to March 2021 were analyzed. Types of procedures and the departments to which they presented were analyzed and the patterns of attendance before and during the pandemic were compared; Results: While there was a significant reduction in the number of orthodontic, endodontic and periodontal procedures there was no impact on oral surgery, restorative procedures or pediatric dentistry; Conclusions: There has been a return in the numbers of patients availing dental treatment, however, there has been a definite shift in the use of certain dental procedures .

This review reports the available technologies for the flexible utilization of biomass towards negative CO₂ emissions and addresses the possibility to couple biogas production plants with the electrical grid converting excess electrical energy into storable chemical molecules. This changed mind-set towards biomass utilization can lead readily to the implementation of negative CO₂ emission along the entire bioenergy supply chain without limiting the potential for Power-to-X applications. First, the technologies for direct conversion of waste and wood into gaseous energy carriers are screened, to highlight the potential for the production of renewable fuels. Second, the processes for the removal of CO₂ from biogenic gas streams are analysed in terms of technological performance, cost and further potential for the CO₂ recovered. These technologies are the key to pre-combustion CO₂ capture and negative emissions. Third, the possibility of coupling biomass conversion and synthetic fuels production is explored, providing an overview on the technical maturity of the various energy storage processes. The flexible use of biomass can be an essential part of the future CO₂-free energy systems, as it can directly provide energy carriers all around the year and also large quantities of climate-neutral carbon for the production of synthetic fuels with renewable energy. In turn, when no additional renewable electricity is available, the CO₂ by-product from biofuel synthesis can be used for the negative emissions. This opens the way to an efficient strategy for the seasonal storage of electrical energy, realizing a carbon-neutral energy system coupled with the development of carbon-negative energy strategy.

Fossil-based plastics are significant contributors to global warming through CO₂ emissions. For more sustainable alternatives to be successful, it is important to ensure that consumers become aware of the benefits of innovations such as bio-based plastics, in order to create demand and a willingness to initially pay more. Given that consumer attitudes and (inaccurate) beliefs can influence the uptake such new technologies, we investigated participants’ attitudes towards fossil-based and bio-based plastic, their perceived importance of recycling both types of plastic, their willingness to pay, and their perceptions of bio-based plastic in four studies (total N = 961). The pre-registered fourth study experimentally manipulated information about bio-based plastic and measured willingness to pay for different types of plastic. The results suggest participants hold very favourable attitudes and are willing to pay more for bio-based products. However, they also harbour misconceptions, especially overestimating bio-based plastic’s biodegradability, and they find it less important to recycle bio-based than fossil-based plastic. Study 4 provided evidence that educating consumers about the properties of bio-based plastic can dispel misconceptions, retain a favourable attitude and a high willingness to pay. We found mixed evidence for the effect of attitudes on willingness to pay, suggesting other psychological factors may also play a role. We discuss how attitudes and misconceptions affect the uptake of new sustainable technologies such as bio-based plastics and consumers’ willingness to purchase them.

The ongoing pandemic of the 2019 novel coronavirus disease (COVID-19) raises a global health crisis, which has resulted in 75,778 confirmed cases with 2130 deaths in China and beyond. Atypical symptom renders it challenging to earlier recognize the 2019-nCoV carrier with the potential ability of equivalent transmission. Therefore, it is needed to gain full spectrum of COVID-19. Here we report clustered COVID-19 cases of person-to-person transmission. The symptoms of typical pneumonia are shared by the two familial members, namely son (Patient 1) and father (Patient 2). Unexpectedly, an influenza-like illness (ILI) is also caused in Patient 3 having close contact with Patient 1 at personal dinner party. Combined with clinical and epidemiological study, chest computed tomography (CT) and molecular diagnosis demonstrate that all the three cases tested positive for COVID-19 with distinct symptoms by human-to-human transmission. To the best of knowledge, it closes in part (if not all), a missing gap of clinical repertoires of COVID-19 outbreaks and underlines the possibility that neglection of cryptic/asymptomatic/mild cold-like syndromes gives biased screen in the earlier stage of COVID-19 cases.

(1) Background: Water resources at Chia lagoon experience possible threat to its sustainability. Communities are seeking alternatives to improve water quality at the lagoon. The study evaluated the extent at which local communities are WTP to improve water quality at Chia lagoon and the influencing factors. (2) Methods: A study was conducted at Chia lagoon, Western Part of Lake Malawi from November, 2015 to March, 2016. Wide range of data collection approaches such as household surveys, exploratory surveys, focus group discussions, key informant interviews and field observation were employed. A sample of 240 households were selected randomly. Qualitative data was analysed using content analysis. Multivariate logistic regression analysis was used to determine factors influence WTP. (3) Results: Out of 240 respondents, 57.4% expressed WTP. Multivariate logistic regression analysis demonstrated significant (P<0.01 or P<0.05) relationship between demographic (Gender, age, literacy level), social-economic (Land ownership, main agriculture water source and income) and institution (civic education and social network, extension, water user rights) factors and WTP. (4) Conclusion: The findings from this study provide significant clues for further research and baseline information for local government and local communities in development of more effective and holistic approaches to improve water quality.

Sustainable food consumption has attracted a widespread attention during last decades by scholars, policy makers and consumers. In line with this, farmers’ markets (FMs) have the potential to encourage sustainable agricultural production and consumption. By reducing the number of actors and distances along the food chain, these alternative food systems foster the reconnection between farmers and consumers and contribute to different social, economic and environmental sustainable goals. This paper provides insights on the role of consumers' sustainability concerns related to their motivation for shopping at FMs. By means of a choice experiment, we analyze the determinants of consumers’ WTP for buying apples at FMs. We are particularly interested in understanding how attitudes towards the three sustainability dimensions are related to consumer preferences in this context. We find that consumer attitudes towards direct contact with producers, contributing to farmers’ income, and environmental benefits can be directly related to product characteristics that are specific to FMs.

In modern data analysis, working with diverse dataset formats is essential for ensuring compatibility across different software tools and platforms. However, manual conversion between formats can be time-consuming and error-prone. To address this challenge, we developed an interactive Shiny application that facilitates the seamless conversion of datasets between popular software formats such as CSV, Excel, SAS, SPSS, Stata, and RData. This user-friendly app enables users to upload datasets, select an output format, and download the converted file with a single click. The application also incorporates a real-time progress indicator, enhancing the user experience by showing conversion progress. Built with simplicity and efficiency in mind, the app is designed for researchers, data analysts, and practitioners who regularly handle multiple file formats in their workflows. Additionally, the app features a clean, intuitive interface with clear guidance, making it accessible even to users with minimal technical background. The development process, key features, and potential applications of this tool are discussed in this article.

Synthetic fuels play an important role in the defossilization of future aviation transport. To reduce the ecological impact of remote airports due to long range transportation of kerosene, a decentralized on-site-production of synthetic paraffinic kerosene is applicable, preferably as near-drop-in fuel or alternatively as blend. One possible solution for such a production of synthetic kerosene is the Power-to-Liquid process. The basic development of a simplified plant layout addressing the specific challenges of a decentralized kerosene production which differ from most current approaches for infrastructural well-connected regions is described. The decisive influence of the Fischer-Tropsch synthesis on the PtL process is shown by means of a steady-state reactor model which was developed in Python and serves as basis for further development of a modular environment able to represent entire process chains. The reactor model is based on reaction kinetics according current literature. The effects of adjustments of the main operation parameters on the reactor behavior are evaluated and the impacts on up- and downstream processes are described. The results prove the governing influence of the Fischer-Tropsch reactor on the PtL process and show its flexibility regarding the desired product fraction output, which makes it an appropriate solution for a decentralized kerosene production.

Background: Strong indicators of inflammation, such as C-reactive protein (CRP), hypersensitive CRP (hs-CRP), and a series of hematological indices, including platelet to lymphocyte ratio (PLR), neutrophil to lymphocyte ratio (NLR), hematocrit (HCT) and red blood cell distribution width (RDW), are regarded related with the incidence of contrast induced nephropathy (CIN) closely. Whereas, it remains unclear whether they can function as predictors of CIN onset. The objective of this meta-analysis was to determine the relationship between above indicators and CIN incidence among patients receiving coronary intervention. Methods: Clinical studies were retrieved from the electronic databases of PubMed, EMBASE, Google Scholar, Clinical Trials, and science direct from their inception to June 3rd, 2020. Meta-analysis was performed on pool eligible studies. Two reviewers screened all titles and abstracts and independently assessed all articles. Results: A total of 26 studies involving 29,454 patients were included in the meta-analysis. Pooled analysis results revealed that patients with higher CRP (odds ratio [OR]=1.06, 95% confidence interval [CI]: 1.01–1.12, P=0.02), hs-CRP (OR=1.03, 95% CI: 1.01–1.06, P=0.004), NLR (OR=1.11, 95% CI: 1.01–1.20, P=0.02), RDW (OR=1.35, 95% CI: 1.19–1.53, P<0.00001), and lower HCT (OR=0.94, 95% CI: 0.92–0.97, P=0.0003) all exhibited significantly higher CIN rates, but there was no significant association between PLR and CIN risk (OR=1.12, 95% CI: 0.99–1.26, P=0.07). Conclusion: The meta-analysis reported here demonstrates that pre-angiography CRP/hs-CRP and some hematological indices are associated with CIN.

Purpose: This study aimed to investigate useful preoperative clinical and hematologic variables in predicting malignancy in patients with the atypia of undetermined significance (AUS) nodules, and to suggest a machine learning-based prediction model. Methods: We enrolled 280 patients who underwent surgery for the AUS nodules at Wonju Severance Christian Hospital between 2018 and 2022. We evaluated preoperative hematologic indices, including Delta Neutrophil Index (DNI), Neutrophil-to-Lymphocyte Ratio (NLR), and Platelet-to-Lymphocyte Ratio (PLR), as well as preoperatively identifiable clinical variables such as age and sex at diagnosis, history of radiation exposure, familial history of thyroid cancer, primary tumor size, and the 2016 Korean Thyroid Imaging Reporting and Data System (K-TIRADS) classification. Results: A total of 116 patients (41.4%) were finally diagnosed with various types of thyroid malignancy, excluding 32 patients (11.4%) with thyroid cancer incidentally identified. Age at diagnosis (p = 0.012), primary tumor size (p = 0.048), and the K-TIRADS classification (p = 0.003) were independent risk factors to predict the diagnosis of malignancy in patients with AUS nodules younger than 55 years, not in those aged of 55 years or older. Adding the NLR to these risk factors significantly improved the predictability for malignancy in the same patient group (p < 0.001). Conclusions: The inclusion of NLR in the ma-lignancy prediction model enhances the predictive accuracy for malignancy in younger patients with AUS nodules. This finding suggests that incorporating NLR into preoperative assessment could refine management strategies and improve decision-making for surgical interventions.

In our study, we investigated the prognostic significance of hematological markers—NLR (Neutrophil-to-Lymphocyte Ratio), PLR (Platelet-to-Lymphocyte Ratio), and RDW-CV (Red Blood Cell Distribution Width - Coefficient of Variation)—in 117 glioblastoma patients. Data collected from January 2016 to December 2018 included demographics, clinical scores, and treatment regimens. Unlike previous research, which often examined these markers solely before surgery, our unique approach analyzed them at multiple stages: preoperative, postoperative, and before adjuvant therapies. We correlated these markers with overall survival (OS) and progression-free survival (PFS) using statistical tools, including ANOVA, Cox regression, and Kaplan-Meier survival analyses, employing SPSS version 29.0. Our findings revealed notable variations in NLR, PLR, and RDW-CV across different treatment stages. NLR and PLR decreased after surgery, with some stabilization post-STUPP phase (NLR: p=0.007, η2p=0.06; PLR: p=0.001, η2p=0.23), while RDW-CV increased post-surgery and during subsequent treatments (RDW-CV: p &lt; 0.001, η2p=0.67). Importantly, we observed significant differences between the preoperative phase and other treatment phases. Additionally, higher NLR and RDW-CV at the second-line treatment and disease progression were associated with an increased risk of death (NLR at 2nd line: HR=1.03, p=0.029; RDW-CV at progression: HR=1.14, p=0.004). We proposed specific marker cutoffs that demonstrated significant associations with survival outcomes when applied to Kaplan-Meier survival curves (NLR at 2nd line &lt; 5: p&lt;0.017; RDW-CV at progression &lt; 15: p=0.007). Elevated NLR and RDW-CV at later treatment stages correlated with poorer OS and PFS. No significant preoperative differences were detected. These biomarkers may serve as non-invasive tools for glioblastoma management.

Artificial Intelligence has transformed the cyber security industry by enabling organizations to systematize and enlarge outdated safety procedures. AI can provide more effective threat detection and response capabilities, enhance vulnerability management, and improve compliance and governance. AI technologies such as machine learning, natural language processing, behavioral analytics, and deep learning can enhance cyber security defenses and protect against a wide range of cyber threats, including malware, phishing attacks, and insider threats.Theoretical underpinnings of AI in cyber security, such as machine learning, natural language processing, behavioral analytics, and deep learning, are discussed. The advantages of using AI in cyber security are discussed including speed and accuracy, continuous learning and adaptation, and efficiency and scalability. It's important to note that AI is not a silver bullet for cyber security and should be used in conjunction with other security measures to provide a comprehensive defense strategy.AI has transformed the way cyber security operates in today's digital age. By analyzing vast amounts of data quickly and accurately it has become a valuable tool for organizations looking to protect their assets from cyber threats.

Taking into account modern technologies in the mining industry and in the processing of industrial waste, we propose to reprocess cemented low- and intermediate level radioactive waste by extracting all chemical compounds from them. Because of the low cost of space flights in the near future, we propose to use chemical compounds, extracted from radioactive waste, in the production of space electronics and structural materials for automatic space probes and rovers. At the same time, since nano- and micro powders, as well as composites with these fillers, are widely used today in electronics and technology, including in the space industry, the production of radioactive powders and composites will provide new scientific results in the field of materials science and solid-state physics, since nothing is known today about the properties of radioactive powders and composites containing radioactive sources inside.

There is a growing awareness of the detrimental environmental impact of the construction industry, primarily due to the utilization of building materials that necessitate energy-intensive processes for their production. The objective of this paper is to explore whether mixing wood and cement could serve as a viable solution to mitigate this adverse environmental effect. The data was obtained by extensively investigating the Clarivate Web of Science database, adhering to the PRISMA technique guidelines, and subsequently processed using Bibliometrix and VOSviewer software. An in-depth critical analysis of the literature revealed a heightened interest in this subject matter in recent years, with the focal points evolving from initial experimental endeavors aimed at understanding the behavior of the innovative wood cement composites, primarily in terms of their mechanical properties, to assessing their environmental impact and the advantages associated with their use. The researchers suggest that optimal results can be achieved by treating the wood with tetraethyl orthosilicate, incorporating cellulose nanocrystal particles or wollastonite into the mixture, and utilizing wood from the Pinus species. Furthermore, it was discovered that a noticeable improvement in strength is only attainable if a low percentage of wood, up to 30%, when wood ash is employed. Ongoing research concerning wood and cement composites continues to progress, with regular advancements and breakthroughs, thus offering promising prospects for the development of superior and eco-friendly building materials.

The scientific community has explored new packaging materials due to environmental challenges and pollution from plastic waste. Bacterial cellulose (BC), produced by bacteria like Gluconaceto-bacter xylinus, shows high potential for food preservation due to its exceptional mechanical strength, high crystallinity, and effective barrier properties against gases and moisture, making it a promising alternative to conventional plastics. This review highlights recent advances in BC production, particularly agro-industrial residues, which reduce costs and enhance environmental sustainability. Incorporating antimicrobial agents into BC matrices has also led to active packaging solutions that extend food shelf life and improve safety. A bibliometric analysis reveals a significant increase in research on BC over the last decade, reflecting growing global interest. Key research themes include the development of BC-based composites and the exploration of their antimicrobial properties. Critical areas for future research include improving BC production's scalability and economic via-bility and its integration with other biopolymers. These developments emphasize BC's potential as a sustainable packaging material and its role in the circular economy through waste valorization.

Electronic waste generation has been following a continuously rising trend. With electronics containing a myriad of materials some of which are hazardous, toxic, extremely rare or precious combined with more stringent legislative laws which encourage the reuse and optimised recycling of the materials included in e-waste, the need for a holistic approach is inevitable. Such an approach should not only identify the materials found in the various types of e-waste and their respective quantities but also needs to highlight the possible handling techniques and their respective impacts and associated hazards whether to the environment or human health. Performing such a task manually would be exasperating and costly while requiring extensive resources which might not be met with a justifiable economic gain; thus, the use of the advancement in computational sustainability to draw a complete picture and aid in an informed decision-making process is crucial. The e-waste ontology developed in this paper is one way of addressing the problem since it covers the treatment domain, the hazard and the materials contained within the different types of e-waste. The ontology developed can be used directly from the protégé software or by embedding it into a developed Decision Support System.

Traditional thermal insulation panels consume large amounts of energy during production and emits pollutants into the environment. To mitigate this impact, the development of bio-based materials is an attractive alternative. In this context, the characteristics of the Eucalyptus fiber bark (EGFB) make it a candidate for insulation applications. However, more knowledge about the manufacturing process and in-service performance is needed. The present study characterized the properties that determinate the in-service behaviour of the EGFB insulation panel. The assessment involved two different manufacturing process. The results indicated that the hot plates and the saturated steam injection manufacturing system can produce panels with similar theoretical and bulk density. The thermal conductivity fluctuated between 0.064 and 0.077 W/m.K, which indicated good insulation. Furthermore, the values obtained for thermal diffusivity and water vapor transmission properties are comparable with other commercially available panels. To guarantee a good in-service performance, the panels need to be treated with flame retardant and antifungal additive. The good performance of the panel is relevant because bio-based Eucalyptus bark panels generate less CO2 eq and require less energy consumption compared to traditional alternatives, contributing to the sustainability of the forestry and the construction industry.

The paper examines the evolution and crucial role of energy communities in the context of the transition to renewable energy sources. Such communities are presented as an innovative and resilient response to the challenges posed by climate change. Their importance emerges from their ability to decentralise energy production, increasing local security and reducing dependence on non-renewable energy sources and external suppliers. However, despite the obvious benefits, the contribution highlights several challenges, such as the need for significant upfront investment and the presence of regulatory barriers that may hinder the integration of these solutions into existing energy systems. A detailed bibliometric analysis is used, focusing on specific research areas and using tools to map the most relevant keywords and emerging trends. The results of the bibliometric analysis highlight how energy communities are emerging as key players in the sustainability landscape, capable of addressing and overcoming contemporary environmental challenges. The research reaffirms the transformative potential of energy communities in promoting a more sustainable and resilient future.

The quality of waste activated sludge produced in urban wastewater treatment systems varies according to the efficiency of the operation of treatment units along the content of microflora and organic carbon. However, these represent a biogas-energy alternative through anaerobic co-digestion, contributing to reducing the environmental impacts caused by their inadequate disposal. Biogas production by the Two-stage production method in batch digesters was evaluated by two qualities of waste activated sludge (SLB50 y SLB90) and with a mixture of two co-substrates: cattle manure (CEV50 y CEV90) and residual edible oil with mixing, pH and temperature control. Bacteria in good quality sludge (SLB90) showed a faster adaptation of 2 days than those in low quality (SLB50) with 25 days lag phase. The highest CH4 production was for SLB90 (303.99cm3 d-1) compared to SLB50 (4.33 cm3 d-1); while cow manure sludge mixture (CEV90) contributed to increasing production of CH4 (42 422.8 cm3 d-1) compared to CEV50 (12 881.45 cm3 CH4 d-1), while in residual edible oil mixture they were 767.32 cm3 d-1 and 211.42 cm3 d-1 for CAV90 y CAV50, respectively. The addition of sludge co-substrates improves the nutrient balance, C/N rate and micro flora diversity; consequently methane production improves too; this methodology could be integrated into concepts of Circular economy.

The article examines the relationship between household food waste and GDP in various European regions, aiming to determine how economic prosperity influences household food waste levels. Using comparative analysis of secondary and tertiary data, we developed a synthetic indicator (IpFW), to assess the interaction between GDP per capita and household food waste per capita. Despite expectations, higher GDP did not consistently correlate with lower food waste, challenging assumptions about economic prosperity and environmental stewardship. The research underscores the complex interplay between economic factors and food waste management, revealing no significant correlation even at regional levels. It also highlights the potential of e-commerce in enhancing food waste reduction strategies. E-commerce platforms can optimize food supply chains and consumer behavior, contributing to more sustainable consumption patterns. The conclusions call for a reevaluation of policies and suggest that integrating e-commerce could bolster efforts to manage food waste more effectively, aligning with the Sustainable Development Goals.

The leather industry is one of the most polluting industries in the world due to the large amounts of waste following the raw hides processing, but also due to the high content of chemicals present in their composition. The main problem of chromium-tanned leather solid waste is related to their storage, because of the ability of chromium to leach in soil or water, and also owing to the high ability of trivalent chromium to oxidize to its toxic form, hexavalent chromium. The purpose of this study is to present the latest methods for extracting trivalent chromium from the composition of solid leather wastes. The extraction methods identified in the present study are based on acid/basic/enzymatic hydrolysis and substitution with the help of organic chelators (organic acids and organic acid salts). In addition, the study includes a comparative analysis between the advantages and disadvantages of each identified extraction method. At the same time, the study also presentes alternative chromium extraction methods based on the combination of conventional extraction methods and ultrasound-assisted extraction.

In an attempt to reuse fibrous textile waste and, at the same time, to address dye pollution in textile wastewater, waste cotton-based yarn was utilized as both a cheap and sustainable adsorbent and a precursor for carbon adsorbent production. Cotton and cotton/polyester yarn samples underwent thermal modification through carbonization followed by chemical activation with KOH. Various techniques including nitrogen adsorption-desorption isotherms, scanning electron microscopy, Fourier transform infrared spectroscopy, and surface charge determination were employed to analyze the morphological and surface properties of the cotton-based adsorbents. Adsorption properties were evaluated by testing the removal of selected cationic and anionic dyes from water. The impact of temperature, contact time, initial concentration, and pH of the adsorbate solution on adsorption was investigated, with experimental data analyzed using theoretical models. While carbonization alone did not significantly enhance adsorption properties, activated samples exhibited high efficacy in removing both cationic and anionic dyes from water. Despite the negative influence of the polyester component in the carbon precursor on the efficiency of activated samples in removing methyl orange, results indicated that activated cotton and cotton/polyester yarn could be used to prepare highly efficient adsorbents for the rapid removal of methylene blue from real wastewater samples.

Food insecurity is an economic and social condition that involves individuals having limited or uncertain access to healthy food. Despite the well-intentioned efforts of both governmental and not-for-profit organizations in addressing food insecurity, well over one-in-ten households in the U.S., the wealthiest nation in the world, experience food insecurity every year. This literature review covered several government programs and research interventions designed to address food insecurity. Results from the review highlight how the Supplemental Nutrition Assistance Program (SNAP), The Emergency Food Assistance Program (TEFAP), and not-for profit food banks have demonstrated success in improving food insecurity. However, the prevalence of food insecurity among U.S. households has fluctuated without any sustained decreases that achieve a food insecurity rate that remains below 10 percent of the population. Food waste, which refers to food that is edible yet discarded at the retail or consumption phases, is rampant in the U.S., as approximately 30 percent (66.5 million tons) of edible food is wasted after leaving the farm every year. Food waste prevention efforts that involve rescuing edible, nutritious food and redistributing it to individuals who are food insecure can promote both environmental- and public health through simultaneous reductions in food waste and food insecurity.

A study was carried out in a Waste Sorting Plant (WSP) located in France and treating dry recyclable household waste (DRHW) as well as dry recyclable commercial and industrial waste (DRCIW). The aim was to investigate the exposure to bioaerosol and dust. The aim of the study was to assess the extent to which the measurement of concentration, species composition and particle size distribution can contribute to a better assessment of the biological risks associated with exposure. Both stationary and personal bioaerosol and dust samples were collect in the (WSP). The results confirm that waste and waste sorting activities are sources of airborne fungi. Indeed, ambient concentrations ranged from 7.3×103 to 8.5×105 CFU/m3 for culturable moulds and up to up to 4 mg/m3 for dust. Personal exposure to inhalable dust was found up to 3 mg/m3 for dust and ranged from 8.6×103 to 1.5×106 CFU/m3 for fungi. Airborne fungal communities were found to be dominated by the Penicillium genera in both bioaerosols and settled dust samples, followed by the Aspergillus, Cladosporium, Wallemia, Mucor, and Rhizopus genera. Fungi were carried by particles of aerodynamic diameters mainly between around 2.0 and 10.0 µm. The findings dealing with size distribution and biodiversity of bioaerosols suggest that employees are exposed to complex bioaerosols during their work and helps to make a finer diagnosis of the risks involved, which is often difficult in the absence of any OEL for bioaerosols in general.

Red mud (RM), a bauxite residue, contains hazardous radioactive wastes and alkaline material and poses severe surface water and groundwater contamination risks, necessitating recycling. Pretreated RM can be used to make adsorbents for water treatment. However, its performance is affected by many factors, resulting in a nonlinear correlation and coupling relationship. This study aimed to identify the best formula for an RM adsorbent using a mathematical model that examines the relationship between 11 formulation types (e.g., pore-assisting agent, component modifier, and external binder) and nine properties (e.g., specific surface area, wetting angle, and Zeta potential, among others). This model was built using a back-propagation neural networks(BP) based on single-factor experimental data and orthogonal test data. The model trained and predicted the established network structure to obtain the optimal adsorbent formula. The RM particle adsorbents had a pH of 10.16, specific surface area(BET) of 48.92 m2·g−1, pore volume of 2.10 cm3·g−1, compressive strength(ST)) of 1.12 KPa, and 24-h immersion pulverization rate(η_m) of 3.72%. In the removal of total phosphorus in flotation tailings backwater, it exhibited a good adsorption capacity (Q)and total phosphorous removal rate(η) of 48.63 mg·g−1 and 95.13%, respectively.

This research explores the depolymerization of waste polymethyl methacrylate (PMMAW) from dental material in fixed-bed semi-batch reactors, focusing on three production scales: laboratory, technical, and pilot. The study investigates the thermal degradation mechanism and kinetics of PMMAW through thermogravimetric (TG) and differential scanning calorimetry (DSC) analyses, revealing a two-step degradation process. The heat flow during PMMAW decomposition is measured by DSC, providing essential parameters for designing pyrolysis processes. The results demonstrate the potential of DSC for energetic analysis and process design, with attention to standardization challenges. Material balance analysis across the production scales reveals a temperature gradient across the fixed bed negatively impacting liquid yield and methyl methacrylate (MMA) concentration. Reactor load and power load variables are introduced, demonstrating decreased temperature with increased process scale. The study identifies the influence of temperature on MMA concentration in the liquid fraction, emphasizing the importance of controlling temperature for efficient depolymerization. Furthermore, the research highlights the formation of aromatic hydrocarbons from the remaining char, indicating a shift in liquid composition during the depolymerization process. The study concludes that lower temperatures below 450 °C favor liquid fractions rich in MMA, suggesting the benefits of lower temperatures and slower heating rates in semi-batch depolymerization. The findings contribute to a novel approach in analyzing pyrolysis processes, emphasizing reactor design and economic considerations for recycling viability. Future research aims to refine and standardize the analysis and design protocols for pyrolysis and similar processes.

Clothing consumers mostly purchase, use, and dispose of clothing products in a linear business model. This approach pollutes the environment and causes economic and social crises in the ecosystems. This study evaluates the amount of generated postconsumer clothing waste (PCCW) and proposes recycling as a sustainable waste management approach. Data were collected to understand disposal behavior of consumers with 474 respondents selected from households in Bahir Dar city. The findings show that all the determinant factors on the PCCW generation level except religion were significant. The most frequently disposed type of clothing waste is jeans-trouser (51%). The CEBM was used to develop alternative products from a jeans-based clothing waste. The jean's fiber and fabric-reinforced composite materials were developed using unsaturated polyester resin as a sustainable way of PCCW management strategy. The shredded form fiber-reinforced composite was found to have a smoother surface than that of the chopped or cut fabric-reinforced composite. The product was characterized by physical and mechanical properties. The study can be further extended to the scope of the entire consumers in Ethiopia and alternative recyclable products can be studied.

The construction sector is considered as a major consumer of virgin materials and contributor to waste generation. Therefore, it is essential to rethink current waste management practices, for example, by applying circular economy principles to building demolition, such as deconstruction. Deconstruction involves dismantling a building with the aim of maintaining the highest possible value for its materials and maximize their recovery potential. This study aims to guide the construction sector towards deconstruction to support its efforts to transform itself toward a more sustainable industry. It focuses on a regional case study in the province of Québec (Canada) presenting five buildings to be deconstructed. First, the study presents the outcomes of our analysis of the current situation. Second, it identifies the issues and obstacles encountered and proposes avenues to improve the current process based on solutions identified in the literature and the recommendations of the manager, the contractor involved in the deconstruction process, as well as experts in the construction industry. Finally, it proposes an improved deconstruction process. Our research approach is inspired from Lean thinking and follows Action Research methodology.

The global predicament of solid waste generation looms as a mounting crisis, profoundly impacting the world, particularly in developing nations. Each day, the world's population contributes millions of tonnes of municipal solid waste, with projections pointing toward further escalation in the coming years. This surge in waste, predominantly composed of cellulose-rich materials, correlates directly with heightened pollution, a threat that transcends borders and imperils humanity as a whole.To confront this ever-growing issue, cellulase, a potent hydrolytic enzyme capable of digesting cellulose, a chief component of solid waste, is explored as a potential solution. In this study, we harness cellulase enzymes derived from the digestive tracts of both Archachatina marginata and Oryctes rhinoceros larvae, employing them as biodegradation agents for cellulose-based waste materials.The cellulase enzymes are methodically isolated and partially purified via ammonium sulfate precipitation at 65% saturation. Their efficacy in breaking down a variety of waste categories, encompassing kitchen waste, leaves, paper, wood, and industrial waste, is meticulously assessed and benchmarked against carboxymethyl cellulose (CMC), a well-established laboratory substrate. The study also ascertains the specific activity of these enzymes.Spectrophotometric analyses of the cellulase enzymes' actions on the diverse waste materials unveil intriguing results. Archachatina marginata and Oryctes rhinoceros larvae exhibit distinct performance metrics, registering percentage ranges of (11.04% - 28.31%) and (33.69% - 189.11%) on wood waste, (76.52% - 196%) and (108.56% - 567.01%) on paper waste, (78.57% - 148.14%) and (163.33% - 436.76%) on leaf waste, (57.16% - 179.95%) and (63.38% - 457.05%) on kitchen waste, and (59.95% - 77.51%) and (117.26% - 155.23%) on industrial waste, respectively. This study underscores the substantial biodegradation potential inherent in cellulase enzymes from both Oryctes rhinoceros larvae and Archachatina marginata when applied to diverse waste materials. While the rates and impacts of waste degradation vary between these sources, their promising contributions to waste management come into focus, offering sustainable and innovative approaches to tackle the pressing global challenge of solid waste proliferation.

The growing population with changing consumption patterns in developing countries is causing significant challenges with regards to solid waste management. Plastic wastes are particularly problematic, with single-use plastics leaking into the environment, including the marine environment, at an unprecedented rate. Approximately 80 percent of ocean plastics come from land-based sources or about 8 million tons are dumped into the ocean every year. Thailand was identified as one of the top 10 countries ranked by mass of mismanaged plastic wastes, with more than 60,000 tons per year entering the ocean through multiple outlets, including rivers. In the environment, plastic wastes can be degraded into small sizes (less than 5 mm), called microplastics (MPs), which could contaminate the ecosystems and the food chain, including foodstuffs and water supply. Tap water samples collected from a water supply treatment plant and Academic Institutions 1 and 2 in central Thailand were found to contain MPs about 304 ±90, 270 ±109 and 386 ±102 particles/L, respectively. In addition, MPs concentrations of 211 ±70 and 122 ±60 particles/L were also found in drinking water samples collected from commercial bottled water and membrane filtration water, respectively. The MPs sizes of 0-50 µm were most abundant in both the tap and drinking water samples whose shapes were mainly fragments and fiber. These data indicated potential health risks to the people who consume these water sources, and recommendations for health impacts minimization were proposed.

In the past years, consumers have increased their interest to buy healthier food products, rejecting those products with more additives and giving preference to the fresh ones. Moreover, the current environmental situation has made society more aware of the importance of reducing the production of plastic and food waste. In this way and considering the Food Industry need of reducing the food spoilage along the food chain, edible coating has been considered as an eco-friendly food packaging that can replace traditional plastic packaging providing an improvement in the product’s shelf-life. Edible coating are thin layers applied straightaway on the food materials’ surface, that are made of biopolymers that usually incorporate other elements, such as nanoparticles or essential oils, to improve their physicochemical properties. These materials must provide a barrier that can prevent the pass of water vapor and other gasses, the microbial growth, the moisture loss, and the oxidation, so the shelf-life could be extended. The aim of this review was to compile the current data available to give a global vision of the formulation process and the different ways to improve the characteristics of the coats applied in both fruits and vegetables. In this way, the suitability of compounds in by-products produced during the Food Industry chain were also considered for the edible coating production.

The effect of organic matter (OM) on soil P-sorption is controversial and needs to be more investigated. The dissolved organic matter (DOM) may be regarded as an influential component on P sorption in natural soils. However, despite the great need for renewable sources of available P and OM in agricultural soils, little is known about interaction between P and DOM in natural soil systems. To uncover if and how soil saturation with DOM derived from different types of abundant agricultural wastes (cattle manure, horse manure, biogas digestate, compost) affects the phosphate sorption, we examined P sorption process in control and DOM-saturated sandy soils. The results indicated that organic matter introduced with agricultural wastes did not always reduce P sorption, but certainly had an effect on impairing P fixation and thus may result in potentially greater P mobility in the soil, including P availability. Up to now, we cannot recommend any of the tested organic amendments to directly overcome the P fixation in arable soils.

Waste management is an unavoidable technological operation in the process of raw material extraction. The main characteristic of this technological operation is the handling of large quantities of waste material, which can amount to several hundred million cubic metres. Working with this amount of material usually requires high-capacity systems for excavation and loading, a large fleet of trucks for haulage, construction, and maintenance of a complex roads network, use of a significant area of land in order to achieve the required capacities, etc. At the same time, this operation must comply with all administrative and environmental standards. Therefore, optimising waste rock management (particularly haulage and dumping) has the potential to significantly improve the overall value of the project. This paper presents a hybrid model for the optimisation of waste dump design and site selection. The model is based on different mathematical methods (genetic algorithm, analytic hierarchy process and heuristic methods) adapted to different aspects of the problem. The main objective of the model is to provide a solution (in analytical and graphical form) for the draft waste dump design, on the basis of which the final waste dump design can be defined.

In order to reduce the environmental damage caused by coal waste landfills, it is necessary to look for rational ways of their management. One of the methods of their development may be the creation of soil-like substrates. The aim of the study was to assess the properties of soil-like substrates from coal mining waste with a varied share of sewage sludge and waste mineral wool. The evaluation of the properties of the substrates was carried out in a pot experiment. The properties of the substrates and their yield potential were determined. Coal mining waste as a substrate, compared to anthropogenic soil, was characterized by: significantly higher sorption capacity, content of alkaline cations and pH, significantly higher content of organic carbon, nitrogen and assimilable forms of K and Mg, and lower content of assimilable P. The substrates enriched with sewage sludge showed: significant increase in the content of organic carbon, nitrogen and assimilable forms of P and Mg, optimization of sorption properties. Extending the composition of substrates with mineral wool resulted in further improvement of their properties. Yields of plants grown on coal mining waste were significantly lower than on anthropogenic soil. Substrates with sewage sludge and mineral wool had a significantly higher yield potential.

In this paper an overview of waste materials in underground coal mines is presented, whereas waste materials can be of anthropogenic or geogenic origin. Complex interactions with mine water and waste materials take place, especially during mine water level rebound. Bearing in mind that under the increasing societal pressure most, if not all underground coal mines are going to be closed rather sooner than later, it is important to understand these interactions and to predict the composition and dynamics of mine water lever rebound in underground coal mines to prevent adverse effects to the environment, especially receiving waters and drinking water resources. The second part of this article focusses on the experiences gained in the Ruhr area, a closed underground coal mining region in Western Germany, where mine water rebound has been ongoing for decades. In this regard, the modelling program DMT-Boxmodel has been developed and applied to predict the hydrodynamics and hydrogeochemical development of the water rebound. As an example, simulation results of water rebound as well as solute and PCB transport in central province of Ruhr mining area are compared to the monitoring data, and predictions over 3 decades are given. The experiences gained in the mine water management in Ruhr area can be applied in mining areas worldwide.

Agriculture has been experiencing a difficult situation because of limiting factors in its production, Natural biostimulants (NBs) have emerged as a novel alternative. This study reviews NBs produced through Solid-State Fermentation (SSF) from organic waste, focusing on the processes and production methods. The aim is to highlight their potential for improving agricultural productivity and promoting sustainable agriculture. Through a literature review, the effects of NBS on crops were examined, as well as the challenges associated with their production and application. The importance of standardizing production processes, optimizing fermentation conditions, and assessing their effects on different crops is emphasized. Furthermore, future research areas are identified, such as enhancing production efficiency and evaluating the effectiveness of SSF-produced NBS in different agricultural systems. In conclusion, SSF-produced NBS offers a promising alternative for sustainable agriculture, but further research and development are needed to maximize its efficacy and enable large-scale implementation.

Silicon has a theoretical specific capacity of 4200 mAh g−1, which is considered to have significant potential for anode materials in lithium-ion batteries (LIBs). However, the volume change that occurs in silicon during charging and discharging affects the development of commercial applications. In this work, a yolk-shell structured Si@void@C anode material has been developed to address this problem. The silicon nanoparticle yolk material is obtained by recycling kerf-loss (KL) Si waste from the photovoltaic industry, the carbon shell is prepared via a hydrothermal process with glucose, and the sacrificial interlayer is Al2O3. The synthesized material is used to fabricate anodes that show a high reversible capacity of 836 mAh g−1 at the current density of 0.1 A g−1 after 100 cycles, with a Coulomb efficiency of 71.4%. This work demonstrates a relatively low-cost approach to turn KL Si waste into value-added materials for LIBs.

Rapeseed meal (RM) is an important agroindustrial by-product produced in large quantities by oil extraction from seeds. However, the efficient utilization of RM as animal feed is limited by its low metabolizable energy, poor palatability, and high levels of fiber and anti-nutritional components. Here, we investigate the potential of enriching RM with single-cell protein by fermentation with conventional and unconventional yeasts, to make a nutritionally improved feed component. The process of simultaneous saccharification and fermentation improved the parameters of the waste biomass, especially the protein content, the amount of crude fiber, and the degree of biotransformation of isoflavone compounds present in the waste material. Fermentation yielded the highest protein gain for the Saccharomyces cerevisiae Ethanol Red strain (ΔN=2.38%) at a biomass load of 12.5 g and for Scheffersomyces stipitis (ΔN=2.34%) at an enzyme dose of 0.125ml/10g DM. Crude fiber content (CF) was reduced by 2.55–7.18%. The SSF process resulted in the conversion of isoflavones to forms with fewer adverse effects and lower estrogenic activity.

Environmental degradation is one of the most visible problems in Hargeisa. Currently, solid waste is disposed of at two dumping sites within the city limits causing nuisance and unsanitary conditions. Moreover, the existing dumpsites are on the verge of closure, therefore necessitating a dire need to be addressed. This research paper is aimed to integrate multicriteria decision analysis and GIS for evaluating the site suitability for the landfill in Hargeisa, Somaliland. For this purpose, eleven significant parameters were selected: proximity from built-up areas, surface water, groundwater well points, sensitive sites (Airports), land use/land cover, geology, soil type, elevation, slopes, roads, and distance to existing dumpsites. These were then integrated using an analytical hierarchy process (AHP). Subsequently, restriction buffer analysis was performed on the seven parameters to obtain better and more accurate results, and restricted zones were omitted. Furthermore, the pair-wise comparison used to obtain priorities between the selected criteria showed that the land uses land cover is the most significant criterion in the model with a relative weight of 0.1829, followed by the habitations, 0.1506. The overall result reveals that about 68.96% (21060.9 ha) of the study area is unsuitable, while 24.36% (7441.53 ha) and 6.68% accounted for the less and highly appropriate zone, respectively. Following the results of this study, Hargeisa City's municipal council must reconsider the waste management and landfill sites to solve the problems observed in the area before it is overdue. Furthermore, this systematic research approach will assist regional and global researchers, policymakers, and municipal governments.

The present work aims to explain the aluminum hydrolysis reaction kinetics based on properly chosen theoretical model with machined aluminum waste chips and alkali solutions up to 1M as a promoter, and to estimate overall reaction profit. In order to obtain results of better accuracy, we work with flat Al waste chips because a flat surface is preferable to maximally increase the time for created hydrogen bubbles to reach the critical gas pressure. At describing the reaction kinetics, flat shape allows using a planar one-dimensional shrinking core model instead of much complicated polydisperse spheric shrinking core model. We analyze the surface chemical reaction and mass transfer rate steps to obtain the first order rate constant for surface reaction and the diffusion coefficient of aqueous reactant in the byproduct layer, respectively. With our reactor we achieved H2 yield of 1145 mL per 1 g Al with 1M NaOH, which is 92% of the theoretical maximum. At estimation of the profit, we pay much attention to the loss of alkaline and find a crucial dependence on its price. Nevertheless, in terms of consumed and originated materials for sale, conversion of the aluminum waste material into green hydrogen by properly chosen reaction parameters has a positive profit even by consuming alkali of chemical grade.

Plastic waste constitutes one of the most important sources of pollution worldwide. Despite the growing recycling trend, nowadays there are no effective technologies that can compensate for the continuous increase in plastic production. Polyesters and polyamides are one of the most produced single-use plastics, mainly used in manufacturing textiles and soft drinks bottles. Today, only a very low fraction of these polymers can be recycled. It can be done by exploiting two leading technologies: mechanical and chemical recycling. Mechanical recycling represents, nowadays, the most used industrial application. However, it can treat a very narrow range of waste materials due to the impossibility of removing dyes and the deterioration of mechanical properties due to the incompatibility of different plastic materials. Another critical limit of this recycling technology is the limited number of recycling loops that can be done due to the thermal degradation that occurs during the extrusion process. The second possibility is chemical recycling, which allows the depolymerization of the original product to recover the monomers directly. The main drawbacks are the long reaction times and the many solvents needed to achieve high-purity products. Therefore, chemical recycling is economically feasible, only for big companies that can produce the virgin polymer in situ. In this work, a new technology has been patented. This process is constituted of three main steps. The first one is the distillation-assisted cyclodepolymerization (DA-CDP), introduced as a modification of the CDP process. In this unit, cyclic oligomers together with high molecular weight compounds have been produced. Then, after polymer purification, it is possible to achieve the same molecular weight of the initial polymer in less than 30 minutes, exploiting the ring-opening polymerization (ROP) in the next step.

Extensive use of petrochemical plastic packaging leads to the greenhouse gas emission and con-tamination to soil and oceans, posing major threats to the ecosystem. The packaging needs, hence, are shifting to bioplastics with natural biodegradability. Lignocellulose, the biomass from forest and agriculture, can produce cellulose nanofibrils (CNF), a biodegradable material with ac-ceptable functional properties, that can make packaging among other products. CNF extracted from lignocellulosic wastes can lower the packaging carbon footprint and the production cost. Most of these low value feedstocks go to alternative applications, that make their use in CNF packaging competitive. To transfer the waste materials from current practices to the packaging production, it is imperative to assess their sustainability, encompassing environmental and eco-nomic impacts along with the feedstock physical and chemical properties. A consolidated over-view of these criteria is absent in the literature. This study performs an iterative literature review and presents thirteen attributes, delineating sustainability of lignocellulosic wastes for commer-cial CNF packaging production. These criteria data are gathered for the UK waste streams, and transformed into a quantitative matrix, evaluating the waste feedstock sustainability for CNF packaging production. The presented approach can be adopted to decision scenarios in bioplas-tics packaging conversion and waste management.

The detection of waste plastics in the marine and terrestrial environment using satellite Earth Observation data offers the possibility of large-scale mapping, and reducing on-the-ground manual investigation. In addition, costs are kept to a minimum by utilizing free-to-access Copernicus data. A Machine Learning based classifier was developed to run on Sentinel-1 and -2 data. In support of the training and validation, a dataset was created with terrestrial and aquatic cases by manually digitizing varying landcover classes alongside plastics under the sub-categories of greenhouses, plastic, tyres and waste sites. The trained classifier, including an Artificial Neural Network and post-processing decision tree, was verified using five locations encompassing these different forms of plastic. Although exact matchups are challenging to digitize, the performance has generated high accuracy statistics, and the resulting land cover classifications have been used to map the occurrence of plastic waste in aquatic and terrestrial environments.

The brittle shear failure of reinforced concrete beams is complexed and unfavorable. For decades, research on the mechanical properties and durability of recycled coarse aggregate (RCA) to make recycled aggregate concrete (RAC) has been widely investigated. However, test results on the shear strength of reinforced recycled aggregate concrete beams are still limited and contradictory. This paper reports the shear strength of reinforced recycled aggregate concrete beams without stirrups. Eight RAC beams and two controlled beams with natural coarse aggregate (NCA) were tested under the four-point flexural test with the shear span-to-effective depth ratio (a/d) of 3.10. Parameters in this study were the replacement percentage of RCA (0%, 25%, 50%, 75%, and 100%) and longitudinal reinforcement ratio (w) of 1.16% and 1.80%. It was found that the normalized shear stresses of RAC beams with w = 1.80% at all levels of replacement percentage were quite similar to that of the NAC counterparts. Normalized shear stress of the beam with 100% RCA and w = 1.16% was lower than that of the NAC beam by 5%. Database of 128 RAC beams without shear reinforcement from literature was analyzed to evaluate the ability of the most recent ACI 318-19 shear provisions in shear strength prediction. A reduction factor of 0.75 is proposed to the current ACI code provision to account for the physical variations of RCA such as replacement percentage, RCA source and quality, density, amount of residual mortar, and physical irregularity.

Waste from fish cutting (heads, swim bladders, fins, skin, bones) is a high-value technological raw material for obtaining substances and products based on them with a wide range of properties. The possibility of using waste from cutting fish of the Gadidae family: the Alaska pollock (Gadus chalcogrammus) and the Pacific cod (Gadus macrocephalus), processed in the coastal zone, is scientifically substantiated. In this work, a technology has been developed for processing accumulated waste from fish cutting in order to obtain fish gelatin, which is characterized by high protein content (more than 80.0%) and a full set of essential and nonessential amino acids. We studied the quality of fish gelatin obtained from wastes from cutting the fish of the Gadidae family. The possibility of using fish gelatin as a component of fish products is shown; the dose of its introduction into the fish products is substantiated. The data obtained made it possible to recommend the use of fish processing waste products as a gelling component and a source of amino acids in multicomponent food systems.

In this article, it is proposed to use aluminum breakage scraps to obtain Green Hydrogen through the aluminum-water reaction with caustic soda as a catalyst. From this exothermic reaction, both hydrogen and the heat generated can be used. Due to the low price of aluminum chips, this allows us to produce Green hydrogen below the current price that is obtained using renewable energy sources and electrolyzers. On the other hand, we have developed a process that is sustainable since it is obtained as alumina and caustic soda waste that can be reused. This alumina obtained, once filtered, has high purity which allows us to produce high-quality primary aluminum without the need to use bauxite and reducing the production of red sludge. A comparative study-analysis has been carried out of two of the types of forms in which the most common aluminum is presented in the industry to analyze which one performs better by studying key factors such as the hydrogen produced, and the waste generated during the process. Finally, the mathematical model has been defined to be able to control the flow based on different key parameters such as temperature, molarity, and geometry. Undoubtedly, the study that we present represents a milestone for the recovery of metallic aluminum waste and may be of great interest to industries that use aluminum in their processes, such as recuperators, but also the vehicle or aerospace industry.

Concrete, as one of the essential construction materials is responsible for a vast amount of emissions. Using recycled materials and gray water can considerably contribute to the sustainability aspect of concrete production. Thus, finding a proper replacement for fresh water, in the production of concrete, is significant. The usage of industrial wastewater, instead of water in the concrete can is considered in this paper. In this study, 450 concrete samples are produced with different amounts of wastewater. The mechanical parameters such as slump, compressive strength, water absorption, tensile strength, electrical resistivity, rapid freezing, half-cell potential, and appearance are investigated. The results showed that the usage of industrial wastewater does not significantly change the main characteristics of concrete. Although, increasing the concentration of the wastewater can decrease durability and strength features nonlinearly.

The rural communities are affected by gaseous emissions from intensive livestock production. Practical mitigation technologies are needed to minimize emissions from stored manure and improve air quality inside barns. In our previous research, the one-time surficial application of biochar to swine manure significantly reduced emissions of NH3 and phenol. We observed that the mitigation effect decreased with time during the 30-day trials. In this research, we hypothe-sized that bi-weekly reapplication of biochar could improve the mitigation effect on a wider range of odorous compounds using larger scale and longer trials. The objective was to evaluate the effectiveness of biochar dose and reapplication on mitigation of targeted gases (NH3, odor-ous VOCs, odor, GHGs) from stored swine manure on a pilot-scale setup over 8-weeks. The bi-weekly reapplication of the lower biochar dose (2 kg/m2) showed much higher significant percent reductions of emissions for NH3 (33% without & 53% with reapplication) and skatole (42% without & 80% with reapplication), respectively. In addition, the reapplication resulted in the emergence of statistical significance to the mitigation effect for all other targeted VOCs. Spe-cifically, for indole, the % reduction improved from 38% (p=0.47, without reapplication) to 78% (p=0.018, with reapplication). For phenol, the % reduction improved from 28% (p=0.71, without reapplication) to 89% (p=0.005, with reapplication). For p-cresol, the % reduction improved from 31% (p=0.86, without reapplication) to 74% (p=0.028, with reapplication). For 4-ethyl phenol, the percent emissions reduction improved from 66% (p=0.44, without reapplication) to 87% (p=0.007, with reapplication). The one-time 2 kg/m2 and 4 kg/m2 treatments showed similar effectiveness in mitigating all targeted gases, and no statistical difference was found between the dosages. The one-time treatments showed significant % reductions of 33% & 42% and 25% & 48% for NH3 and skatole, respectively. The practical significance is that the higher (one-time) biochar dose may not necessarily result in improved performance over the 8-week manure storage, but the bi-weekly reapplication showed significant improvement in mitigating NH3 and odorous VOCs. The lower dosages and the frequency of reapplication on the larger-scale should be explored to optimize biochar treatment and bring it closer to on-farm trials.

Despite good intentions, the increasing number of plastic bag bans aimed at alleviating marine plastic pollution saw a correlated increase in the number of unintended consequences that emerged alongside the bans, suggesting that human behavior towards plastic bag consumption have not changed, but merely shifted, and are feeding into other major international environmental catastrophes. Nudge theory, which helps people make better choices for themselves without inhibiting their free will, is a potential solution that has been shown to play a subtle but important role in providing options under circumstances where complex information needs to be streamlined for the wider community, avoiding any unintended consequences and behavioural shifts that might arise from instruments that diminishes autonomy. It is therefore timely to look into the insights of nudge theory to encourage a positive behavioural change to reduce plastic bag consumption. Here we apply a systematic literature review to show how successful applications of nudges in supermarkets can be leveraged to reduce plastic bag consumption. We find that the current applications of nudges in various industries worldwide, including supermarkets have produced positive and encouraging results, as well as producing lasting behavioural change among the wider community. Supermarkets are identified as a powerful deployment site of these nudges due to their positioning as a dominant provider of plastic bags to the wider community, as well as being the largest and leading provider of daily food needs. Finally, we synthesise our findings to produce a coherent and testable framework of actionable interventions that supermarkets can employ to nudge customers towards reduced plastic bag reliance, accompanied with a visual timeline of a customer shopping in a supermarket experiencing these nudges.

The interest in high homogenization pressure technology has grown over the years. It is a green technology with low energy consumption, not generating high CO2 emissions or polluting effluents. The main food applications derive from its effect on particle size, causing a more homogeneous distribution of fluid elements (particles, globules, droplets, aggregates, etc.) and favouring the release of intracellular components; and its effect on the structure and configuration of chemical components such as polyphenols and macromolecules such as carbohydrates (fibres) and proteins (also microorganisms and enzymes). The challenges of the 21st century lead food industry processing towards obtaining food with high nutritional quality and taking advantage of waste to obtain ingredients with specific properties. For this purpose, soft and non-thermal technologies such as high pressures homogenization have a huge potential. The objective of this work is to review how the need to combine safety, functionality and sustainability in food industry has conditioned the last decade applications of high-pressure homogenization technology.

The aim of the research was a comprehensive evaluation of concrete using the EIPI method. In the evaluation the compressive strength of concrete and its durability properties represented by sorptivity and air permeability were taken into account. Since copper slag waste with increased natural radioactivity was used in the assessed concrete, additional evaluation was carried out taking into account the influence of natural radioactivity within the performance index. Also the reference concrete, which was made without the use of copper slag waste, was evaluated for comparative purposes. In order to make the evaluation as comprehensive as possible, the concrete made with the use of three types of cement was subjected to the assessment: CEM I, CEM II and CEM III. The results show that in both approaches the best result was achieved by concrete with CEM III cement. If natural radioactivity is not taken into account in the evaluation, the best result is obtained by concrete made with copper slag waste, and if radioactivity is considered, the best result is obtained with concrete without addition of the waste. It follows from the above that although natural radioactivity has a significant impact on the EIPI evaluation result, the decisive factor is still the type of cement.

Pomegranate peel is a natural source of phenolics, claimed to possess healing properties, among which antioxidant and antidiabetic. In line with this evidence, the ethyl acetate PGE extract, obtained by Soxhlet from the peel of Dente di cavallo DC2 variety and characterized by a 4% amount of ellagic acid, has been studied for its hypoglycemic, antiglycation and antioxidative cytoprotective properties, in order to support a possible further nutraceutical interest. The α-amylase and α-glucosidase enzyme inhibition, interference with advanced glycation end-products (AGE) formation and metal chelating abilities were evaluated as hypoglycemic mechanisms. Also, considering that oxidative stress is associated with hyperglycemia complications, PGE antioxidant cytoprotective properties under hyperglycemic conditions were assayed. Phenolic profile was characterized by integrated chromatographic and spectrophotometric methods. Under our experimental conditions, PGE strongly inhibited the tested enzymes, especially α-glucosidase, and exerted chelating and antiglycation properties. Also, it reduced both ROS and GSH levels under hyperglycemic conditions, thus suggesting its ability to support cell functions by counteracting intracellular oxidative stress. Along with ellagic acid, rutin was the major identified flavonoid (about 4 %) of PGE. Present results suggest PGE to be a possible remedy for hyperglycemia management and encourage further studies to exploit its promising properties.

This study evaluates the feasibility of stabilizing clay bricks with marble cutting waste (MCW). This waste currently discarded in huge quantities as a sludge resulted from sawing the marble blocks to slabs, grinding and polishing of marble processes to the landfills located around the marble processing factories located in the Shaq El-Thoban industrial zone, Cairo governorate, Egypt causing negative impacts on the environment, health and sustainable development. Experimental investigations were carried out to explore the effect of addition of the MCW in different clay-base mixes at different percentages up to 25% at the expense of the hydrated lime. Cement, hydrated lime and MCW are the three types of solidification agents used, clay and sand were also added in the formulations of the unfired clay brick specimens. Laboratory cylindrical stabilized and compressed specimens were made, and then they were cured in a humidity chamber for 2 and 4 weeks, then after were air dried, tested and evaluated according to the Egyptian code for the building by the stabilized and compressed earth soil (ECBS, 2016). To enhance the durability of the cured specimens, transparent silicon – based paint was used for this purpose. The laboratory results demonstrate high potential usage of MCW based additives up to 15% incorporating HL. In addition, the used paint could be an effective treatment way for the use of stabilized bricks in a wet environment. The use of eco-friendly building materials will be a great contribution for the environmental advantages and suggest a remarkable economical alternative to the fired building units.

The UK economy is overly reliant on unsustainable production and consumption practices, depleting finite resources at rates that will increase production costs, business risk and economic instability. This over-consumption produces emissions and waste that cause climate change and environmental degradation, impacting on the wellbeing of people in the UK and beyond. The Resource Recovery from Waste programme (RRfW) promotes a transition towards waste and resource management in a circular economy that restores the environment, creates societal benefits and promotes clean growth by engaging relevant actors in the transition process. RRfW collaborates with academia, government, and industry to co-produce a shared vision and approach to realise such a transition. Reflecting insights from RRfW’s government engagement, this article presents a positive outlook for changing the UK economy and society. It envisions a long-term future for waste and resource management that maximises the value of materials by circulating them in the economy for as long as possible. Four themes and an approach are proposed, including recommendations for regulatory instruments and a stable policy framework. It recommends further collaborative research to capitalise on opportunities for economic growth, innovation and resilient infrastructure whilst contributing to quality jobs and welfare in all four UK nations.

Agriculture is the largest sector of Nepalese economy among the south-Asian developing countries that contributed 26.98 % share of Gross Domestic Product (GDP) in the year 2018/19. The capacity to derive maximum output by per unit of resource is resource use efficiency. Resource use efficiency of a producer explains the comparison between inputs and output value. Potato is staple vegetable in every parts of Nepal. Cobb-Douglas production function is used to predict the significance of inputs in income from cash crops. Due to lack of optimum utilization of available resources in cultivation of vegetable like lack of technical knowledge, low education level, and extensive service the productivity and production is low in Nepalese economy. It ensures vegetable security in Nepal. Though, there are extensive researches on the resource use efficiency and productivity issues on agriculture, very few papers explored in the case of Sudurpaschim province of Nepal OBJECTIVE: This study had the specific purposes: (1) To identify the factors affecting in resource use efficiency and productivity of potato production (2) to utilize the resource use efficiency and productivity in potato production and (3) to show the type of returns to scale in potato production. METHODS: Applying post-positivist paradigm and quantitative causal survey research design, it explored the resource use efficiency and productivity through the semi-structured questionnaire from 140 households by random sampling. Data analysis was carried out by multiple regression model using Cobb-Douglas production function. SPSS software was used to find quantitative results. From the analysis of data using mean, and SD, t-test, analysis of variance, Durbin-Waston test, Marginal Value Product and marginal Factor cost, findings of this research was emerged. RESULTS AND DISCUSSION: The major findings: education level, extension service, farm size and pesticide cost were significant variables in potato production; seed, hired labor, Family Yard Manure and pesticide cost were overused and needed to decrease their cost for optimum allocation and there was decreasing returns to scale in production. This study emphasized on increasing education level, extensive service and farm size for optimum utilization of resources and increasing returns to scale. SIGNIFICANCE: Barriers to Indian potatoes and increasing returns to scale are only possible through protection policy of government. For optimum use of resources and increasing returns to scale, government can introduce capital intensive technique. This study can be implied in policy making and improving existing situation of agriculture, and allocating budget.

: Based on fairness perspective, this paper combines the social vulnerability assessment of natural hazards with multi-objective site selection model to propose a new site selection planning model for central refuges. To begin with, the social vulnerability assessment system of regional natural disasters is founded through literature analysis, and the social vulnerability index of natural disasters is constructed; and based on the exponential differentiation of index to depict regional refuge demand, design vulnerability coverage function quantitive site selection fairness; then taking the shortest weighted evacuation distance, maximum vulnerability coverage and construction cost, the coverage population and refuge quantity as constraint conditions to construct multi-objective optimization model; finally, taking Zigong City, Sichuan Province as the object of empirical research, adapting NSGA-II algorithm to get the Pareto optimal solution set, and using TOPSIS method to get the optimal location scheme. The research results can provide a new method for the location layout of central refuge.

Chili peppers (Capsicum annuum L.) are economically important crop worldwide. Pepper yellow leaf cure Thailand virus (PepYLCTHV), a Begomovirus causing yellow leaf mosaic disease of chili pepper has been reported to damage 95% economic loss under favorable epidemic conditions. Thirty-one chili genotypes were screened for resistance to PepYLCTHV disease through challenge inoculation using 10-15 viruliferous whiteflies per plant. We purified two resistant lines (PEP6 and PEP12) through four generations of selfing and selection through challenged inoculations. At the 28 days after inoculations two chili genotypes showed symptoms less based on disease severity and percentage of disease incidence of 30 plants PEP6 showed a disease severity 3.64 with 69.33 % DI and PEP12 showed a disease severity 3.83 with 77.67 % DI. PEP6 and PEP12 were selected for pure-line development for four cycles.Both varieties showed an increase in percentage of the resistant plant 12.78 % and 16.77 %, respectively. These lines have potential for release as resistant lines for improvement chili pepper resistance to PepYLCTHV and for developing maker associated with the resistant trait.

A number of studies suggested that influenza vaccination can provide protection against COVID-19 but the underlying mechanisms that could explain this association is still unclear. In this study, the effect of the 2021/2022 seasonal influenza vaccination on the immune response to the booster dose of anti-SARS-CoV-2 vaccination was evaluated in a cohort of healthy individuals. One hundred and thirteen participants were enrolled, and 74 of them with no prior COVID-19 diagnosis or significant co-morbidities were considered for the analysis. Participants received the anti-influenza tetravalent vaccine and the booster dose of the anti-SARS-CoV-2 vaccine or the anti-SARS-CoV-2 vaccine alone. Blood was collected before and 4 weeks after each vaccination and 12 weeks after SARSCoV2 vaccination and analyzed for anti-flu and anti-spike-specific antibody titers and for in vitro influenza and SARS-CoV-2 neutralization capacity. Results indicated an increased reactivity in subjects who received both influenza and SARSCoV2 vaccinations, as compared to those who received only the SARS-CoV-2 vaccine, with sustained anti-spike antibody titers up to 12 weeks post-vaccination. Immune response to influenza vaccine was evaluated and individuals were stratified as high or low responders. High responders showed increased antibody titers against SARSCoV2 vaccine both after 4- and 12-weeks post-vaccination. On the contrary, the individuals classified as low responders were less responsive to the SARS-CoV-2 vaccine. These data indicate that both external stimuli, such as influenza vaccination, and the host's intrinsic ability to respond to stimuli play a role in the response to vaccine.

Background: Currently, a Dolutegravir (DTG)-based regimen is administered to women on option B plus to prevent mother-to-child transmission (MTCT) of the virus. However, its effect on reducing MTCT of human immunodeficiency virus (HIV) among exposed infants over the previously used Efavirenz (EFV)-based regimen is unknown. Objective: This study aimed to compare the effects of DTG-based and EFV-based regimens on the MTCT of HIV among exposed infants in southern Ethiopia. Methods: A retrospective before-after study design was employed from March to May 2023 among 958 mother-infant pairs (479 on EFV-based and 479 on DTG-based regimens) enrolled in the prevent mother-to-child transmission (PMTCT) care from September 2015 to February 2023. The outcome variable was the HIV infection status among the exposed infants. A log-binomial model was employed and the proportion was computed to compare the incidence of MTCT of HIV in both groups. The risk ratio (RR) with 95% confidence interval (CI) was calculated to assess the predictor variables. Results: Mothers on a DTG-based regimen were approximately 44% (adjusted risk ratio (aRR): 0.56; 95% CI: 0.44, 0.70) less likely to transmit HIV to their infants than those on an EFV-based regimen. In addition, poor/fair adherence to antiretroviral therapy (ART) (aRR: 5.82; 95% CI: 3.41, 9.93), home delivery (aRR: 3.61; 95% CI: 2.32, 5.62), mixed feeding practice (aRR: 1.83; 95% CI: 1.45, 2.3), and not receiving antiretroviral prophylaxis (aRR: 3.26; 95% CI: 1.6, 6.64) were found to increase the risk of MTCT of HIV infection, whereas older maternal age (aRR: 0.93; 95% CI: 0.9, 0.96) was a protective factor.Conclusion: The Dolutegravir-based regimen significantly reduced MTCT of HIV among exposed infants compared to the EFV-based regimen. Thus, DTG-based first-line ART regimen supplementation should be sustained to achieve global and national targets for zero new infections in HIV-exposed infants.

: Inflammation may mediate the association of mitral valve prolapse (MVP) with ventricular scarring and arrhythmia. The purpose of this study is to investigate the association of neutrophil- and platelet-to-lymphocyte ratios (NLR, PLR) with ventricular arrhythmia in MVP. Clinical and demographic data were extracted from electronic medical records for all patients aged 18-90 years with MVP on echocardiography between 2016-19 at our institution. We studied 65 patients who had a differential blood count within six months prior to ambulatory ECG (A- ECG) (medi-an age [IQR] 70 [61-77] years; 62% female; 12% African American). Patients with surgery or in-fection within six months prior to CBC were excluded. Complex or frequent ventricular ectopy (cfVE) was defined as the presence of two or more premature ventricular contractions (PVCs) on a 10-second ECG tracing or greater than 1% PVC burden or NSVT on ambulatory ECG monitoring. Logistic and bivariate regression was used to analyze clinical, electrocardiographic and echo-cardiographic factors associated with NLR and PLR. Factors associated with higher NLR were congestive heart failure (p=0.005), male sex (p=0.01), age (p=0.003), and bileaflet MVP (p=0.04). NLR was associated with higher absolute PVC burden (rs=0.28, p=0.03) and cfVE (median NLR [IQR] 3.0 [1.6 – 6.3]) with cfVE versus (2.4 [1.4-3.4], p=0.04) without cfVE. An NLR of 5.6 yielded 50% sensitivity and 90% specificity for PVC burden >1% (AUC 0.69). No significant association was found between PLR and PVC burden or cfVE. NLR is associated with PVC burden and com-plex ventricular ectopy in MVP, suggesting that inflammation is a significant factor in the patho-genesis of ventricular arrhythmia in this condition.

Addressing the increasing nursing demand in the face of a limited nursing workforce, understanding job satisfaction and retention becomes critical. Our cross-sectional study, conducted among 2,572 nurses in Bavaria, Germany, uncovers a dichotomy where nurses have strong empathy for their profession yet yearn for significant improvements. The top areas identified for enhancement include (i) ensuring sufficient time for patient care, (ii) providing a reliable service organization with minimal unplanned shift changes, and (iii) streamlining nursing documentation. Moreover, the largest disparity between expectations and job satisfaction was measured in patient care time. Multivariable regression analysis further investigates factors influencing intentions to stay in the profession, including (i) demographic aspects (age, living conditions), (ii) working area, (iii) working hours, (iv) career choice satisfaction, (v) career opportunities, (vi) payment, (vii) working and rest times, and (viii) satisfaction derived from aiding individuals in challenging life situations. The findings uncover a need to change nursing conditions, and measures for younger nurses and elderly care nursing. Although there are limitations, and a potential bias due to convenience sampling, our study provides key insights into nursing conditions. Future research should broaden its scope to investigate nurse job satisfaction and retention, emphasizing potential relief tools such as digitization.

To meet the International Maritime Organization’s requirements for carbon dioxide emissions from ships, a cost-effective and practical ship decarbonization tower was autonomously designed based on the marine diesel engine model 6135G128ZCa. The tower is internally filled with structured packing, and a slot-type liquid distributor at the top of the packing evenly distributes the NaOH solution to absorb carbon dioxide from the ship’s exhaust gas. Experimental research was conducted to investigate the influence of factors such as liquid-to-gas ratio and NaOH concentration on the performance of the decarbonization tower. The results confirmed that the use of NaOH solution can effectively absorb CO2 from ship exhaust gas, reducing CO2 emissions by more than 81.59% and meeting the EEDI (Energy Efficiency Design Index) requirements specified by the IMO.

In the realm of artificial intelligence (AI), generative systems, most notably Midjourney, have tremendous power to generate creative images of buildings and sites of Islamic architectural heritage through text-to-image generation based on the internet. The AI-generated representations have significant potential for architects, specialists, and common users. However, the system has considerable limitations when generating images for some buildings and sites where the representations appear too far from their original represented structures. This research article attempts to answer the question: What are the limitations of using the AI system of Midjourney in producing images similar to the original buildings and sites of the Islamic architectural heritage? The research employs prompt engineering techniques based on historical sources as inputs to examine the accuracy of the output of the AI-generated images of selected examples of structures of the Islamic tradition. It compares the output with the original look by employing direct observation and critical analysis of human intelligence (HI). It categorizes these limitations into four groups: (1) limits of the prompt, (2) limits of fame, (3) limits of regionality and historical styles, and (4) limits of architectural elements and details. It concludes that while Midjourney has great capability to represent high-end AI-generated images inspired by the Islamic tradition, it currently falls short of presenting the actual appearance of some of their original structures.

This work focuses on an inland area of North Sardinia (Italy), which is currently subject to depopulation and economic crisis because it is not affected by the summer tourism typical of the region. Despite this, the area shows an interesting architectural and natural heritage, as of today insufficiently known and valued. Therefore, the purpose of this paper is to illustrate the application of the Conjoint Analysis methodology on this case study aimed at supporting processes of valorisation, diversification of the tourist offer and promotion of the through the detection of the preferences of a sample of residents and visitors on a set of 9 cards (itinerary profiles) which also promote the peculiarities of small rural centres. Thus, by valorising the material and immaterial heritage and their intrinsic characteristics, it is shown that inland areas can generate an economy by offering new types of tourism, not just the typically invasive summer and maritime tourism. The research, therefore, seeks to estimate the economic value of the area from a public point of view through the WTP measured by a questionnaire of 600 interviews between inhabitants (300) and tourists (299).

Food Neophobia (FN), defined as the reluctance to eat new or unfamiliar foods, mainly concerns fruit, vegetables, and legumes, typical of the Mediterranean Diet (MD). Considering these premises, this study aimed to clarify the relationship between FN and AMD in a sample of Italian children and their association with some socio-demographic factors and children's nutritional status. A sample of 288 children aged 3-11 years, participated to an assessment carried out with a questionnaire evaluating FN and AMD, respectively with Child Food Neophobia Scale (CFNS) and the KIDMED Test. Most of the sample showed an intermediate (67.3%) or high level of FN (18.1%) with high rates among 6-11 years old children (63.9%) and especially in only-child (50%). The AMD was mostly low (29.5%) or medium (54.8%) and reached lower levels among higher neophobic children (51.9%; p value &lt; 0.05). Present results confirm the study hypothesis that FN is a driver of MD abandonment and show the positive effects on children's eating habits of having siblings. Finally, this study proves the relevance of adopting effective feeding strategies against FN to avoid its maintenance in adulthood and detrimental effects on future overall health and well-being.

Canine mammary tumors represent one of the leading malignant pathology in female dogs, displaying the importance of efficient therapeutic findings, beside the golden standard surgery, able to limit the development of the disease. Studies in human cancers demonstrated that Doxorubicin presents a good effect in different biological processes like apoptosis, autophagy, cell cycle, cell invasion and epithelial to mesenchymal transition. Our study following the effects of Doxorubicin on two canine mammary cancer cell lines P114 and CMT-U27, showing an inhibitory effect in cell proliferation and an expression alteration of the EMT related genes.

Ustekinumab, a new anti-interleukin-12/23 antibody, is an effective treatment for ulcerative colitis; however, data regarding predictive factors of its efficacy are limited. This study aimed to identify biomarkers that can predict the long-term outcome of ustekinumab treatment. We retrospectively reviewed the records of patients with active ulcerative colitis treated with ustekinumab at our hospital from June 2020 to January 2023. We divided patients into non-remission and remission groups, and examined whether baseline biomarkers, including C-reactive protein-to-lymphocyte ratio, and early treatment response could predict clinical remission at week 48 of ustekinumab treatment. Of the 33 patients included in the study, 21 (63.6%) were in clinical remission at week 48 of ustekinumab treatment. The baseline C-reactive protein-to-lymphocyte ratio value was identified as an independent prognostic factor for clinical remission at week 48 (odds ratio: 10, 95% confidence interval: 1.6–62.4, p=0.014), with the cutoff value of 3.353 showing excellent prognostic performance (sensitivity: 71.4%, specificity: 83.3%). Furthermore, the clinical response at week 4 (p=0.009) and that at week 8 (p=0.005) were significantly associated with clinical remission at week 48. The baseline C-reactive protein-to-lymphocyte ratio value and early treatment response are useful biomarkers to predict the long-term efficacy of ustekinumab treatment.

The cutting of difficult-to-machine materials, including their preconditioning, often requires specialised tools and machinery. An alternative processing technology can be cutting materials with a water jet. From the initial stage, the selection of appropriate technological parameters will influence what further finishing treatments will be applied. Vibrations occurring during this process can negatively affect the quality of the cutting edges and surfaces. Therefore, this study analysed vibrations during water-jet cutting with variable technological parameters (speed vfi and pressure pi). To measure the vibrations, a three-axis accelerometer from SEQUOIA was used in water-jet cutting of three materials: aluminum alloy, titanium alloy, and steel. Based on the study, it was found that the maximum value of vibration amplitude reaches the lowest value of vibration acceleration for aluminum alloy (not exceeding 5 m/s2), regardless of the value of pressure during the cutting process. This, taking into account the material properties, indicates that aluminum alloy is the material most susceptible to the cutting process while maintaining a high quality of the cutting surface. Significantly higher values of vibration acceleration amplitude (reaching up to 60 m/s2) during cutting were registered for steel and titanium alloy in all zones and phases of the process (entry zone, cutting zone, and exit zones).

Graphene is a two-dimensional nanostructured material with intrinsic properties that show promising performance in various applications, including electronics, renewable energy, medicine, mechanical enforcement and others. This study reports a bottom-up approach for the conversion of cyclohexane into graphene nanoflakes, which were then deposited onto fiberglass using a non-thermal generator. The composite was characterized using transmission electron microscopy, which revealed the formation of stacked few-layer graphene with a partially disordered structure and a d-spacing of 0.358 nm between the layers. X-ray diffraction confirmed the observations from the TEM images. SEM images showed the agglomeration of carbonaceous material onto the fiberglass, which experienced some delamination due to the synthesis method. Raman spectroscopy indicated that the obtained graphene exhibited a predominance of defects in its structure. Additionally, Atomic Force Microscopy (AFM) analyses revealed the formation of graphene layers with varying levels of porosity.

In this paper, a novel strategy is adopted in a degradation model to affect the implied lifetime distribution. The multiplicative degradation model is utilized as a postulate in the model. It will be established that the implied lifetime distribution forms a classical mixture model. In this mixture model, time-to-failure is lying with some probabilities between two first passage times of the degradation process to reach two specified levels. Stochastic comparisons in the model under a change in the probabilities are studied. Several examples are provided to highlight the applicability of the results in the cases when typical degradation models are candidate.

Epithelial ovarian cancer (EOC) remains the most lethal gynecologic malignancy, largely due to metastasis and drug resistant recurrences. Fifteen percent of ovarian tumors carry mutations in BRCA1 or BRCA2, rendering them vulnerable to treatment with PARP inhibitors such as olaparib. Recent studies have shown that TGFβ can induce “BRCAness” in BRCA wild-type cancer cells. Given that TGFβ is a known driver of epithelial to mesenchymal transition (EMT), and the con-nection between EMT and metastatic spread in EOC and other cancers, we asked if TGFβ and EMT alter susceptibility of EOC to PARP inhibition. Epithelial EOC cells were transiently treated with soluble TGFβ and their clonogenic potential, expression and function of EMT and DNA repair genes, and response to PARP inhibitors compared with untreated controls. A second epithelial cell line was compared to its mesenchymal derivative for EMT and DNA repair gene expression and drug responses. We found that TGFβ and EMT resulted in downregulation of genes responsible for homologous recombination (HR) and sensitized cells to olaparib. HR efficiency was reduced in a dose-dependent manner. Furthermore, mesenchymal cells displayed sensitivity to olaparib, cis-platin, and the DNA-PK inhibitor Nu-7441. Therefore, treatment of disseminated, mesenchymal tumors may represent an opportunity to expand clinical utility of PARP inhibitors and similar agents.

The article presents the results of a morpho-physiological assessment of rice samples by the strength of growth, as well as an assessment of the degree of development of the conducting system of the flag leaves of rice plants. The resistance of varieties to flooding is very relevant in the fight against weeds due to the deep layer of water that weeds cannot overcome. Currently, there are no zoned varieties in Russia that would meet these requirements. Therefore, the problem of creating such rice varieties is urgent, as it will reduce production costs, reduce grain losses during harvesting, improve the quality of the products obtained, and also reduce the pesticide load on the ecosystem. As a result of research, a number of studied samples revealed the potential to quickly lengthen the first leaves, overcome a large layer of water and accumulate vegetative mass. As a result of the evaluation of the conducting system of the flag leaf of rice plants, it was found that in plants with the flood resistance gene Sub1A, which stops growth under water, the conductive beams were smaller in comparison with other fast-growing samples with the AG, Sk genes. Consequently, fast-growing samples have bigger sizes of the conducting system as a resistance mechanism.

Since the beginning of 2020, tetracycline (TC), such as minocycline (MINO), has been used to inhibit coronavirus disease 2019 (COVID-19). Traditional Japanese Kampo medicine, such as Saiko-keishi-to (SKT), has recently received a lot of attention for its anti-severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) effects. We describe a COVID-19 patient treated with MINO and SKT in anticipation of their anti-SARS-CoV-2 properties. A 90-year-old male patient with Alzheimer’s disease was referred to a medical clinic due to fever, appetite loss, and general malaise. Based on positive SARS-CoV-2 rapid antigen tests, he was diagnosed with COVID-19. He did not have COVID-19 pneumonia, but he had difficulty in eating on his own. As a result, he was referred to a hospital for admission. After admission, he was treated with molnupiravir to avoid aggravation. Seven days after his admission, he was discharged. After his discharge, he was referred to our hospital as an outpatient due to a prolonged mild fever and general malaise. As a precaution, a real-time reverse transcription-polymerase chain reaction (RT-PCR) test was performed, which yielded a positive result. Therefore, the aforementioned symptoms were thought to be caused by prolonged COVID-19. He was treated with MINO and SKT due to the anti-viral properties of these two drugs. The RT-PCR test became negative 7 days after receiving this treatment, and the fever and general malaise subsided.

The gauge field equation for fluid mechanics established in Part 1 is developed into a first-order scattering theory in the simplified case of a two-dimensional incompressible flow over a flat plate. This is used to present a model for the origin of Tollmien-Schlichting (TS) waves based on scattering between fluid particles. As a result, analytical formulae for the maximum amplification factor and the transition point from laminar to turbulent flow in the boundary layer are obtained. The mathematical transformations from the stationary field equations in Part 1 to a scattering theory with time evolution along the flow axis using Wick rotation are elaborated in detail.

Deep neural networks have been extensively researched in the field of document image classification to improve classification performance and have shown excellent results. However, there is little research in this area that addresses the question of how well these models would perform in a real-world environment, where the data the models are confronted with often exhibits various types of noise or distortion. In this work, we present two separate benchmark datasets, namely RVL-CDIP-D and Tobacco3482-D, to evaluate the robustness of existing state-of-the-art document image classifiers to different types of data distortions that are commonly encountered in the real world. The proposed benchmarks are generated by inserting 21 different types of data distortions with varying severity levels into the well-known document datasets RVL-CDIP and Tobacco3482, respectively, which are then used to quantitatively evaluate the impact of the different distortion types on the performance of latest document image classifiers. In doing so, we show that while the higher accuracy models also exhibit relatively higher robustness, they still severely underperform on some specific distortions, with their classification accuracies dropping from ~90% to as low as ~40% in some cases. We also show that some of these high accuracy models perform even worse than the baseline AlexNet model in the presence of distortions, with the relative decline in their accuracy sometimes reaching as high as 300-450% that of AlexNet. The proposed robustness benchmarks are made available to the community and may aid future research in this area.

Previous studies have quantified repolarization variability using time-domain, frequency-domain and non-linear analysis in mouse hearts. Here, we investigated the relationship between these parameters and ventricular arrhythmogenicity in a hypokalaemia model of acquired long QT syndrome. Methods: Left ventricular monophasic action potentials (MAPs) were recorded during right ventricular regular 8 Hz pacing during normokalaemia (5.2 mM [K+]), hypokalaemia modelling LQTS (3 mM [K+]) or hypokalaemia with 0.1 mM heptanol in Langendorff-perfused mouse hearts. Results: During normokalaemia, mean APD was 33.5±3.7 ms. Standard deviation (SD) of APDs was 0.63±0.33 ms, coefficient of variation was 1.9±1.0% and the root mean square (RMS) of successive differences in APDs was 0.3±0.1 ms. Low- and high-frequency peaks were 0.6±0.5 and 2.3±0.7 Hz, respectively, with percentage powers of 38±22 and 61±23%. Poincaré plots of APDn+1 against APDn revealed ellipsoid morphologies with SD along the line-of-identity (SD2) to SD perpendicular to the line-of-identity (SD1) ratio of 4.6±1.1. Approximate and sample entropy were 0.49±0.12 and 0.64±0.29, respectively. Detrended fluctuation analysis revealed short- and long-term fluctuation slopes of 1.62±0.27 and 0.60±0.18, respectively. Hypokalaemia provoked ventricular tachycardia in six of seven hearts, prolonged APDs (51.2±7.9 ms), decreased SD2/SD1 ratio (3.1±1.0), increased approximate and sample entropy (0.68±0.08 and 1.02±0.33) and decreased short-term fluctuation slope (1.23 ± 0.20) (ANOVA, P<0.05). Heptanol prevented VT in all hearts studied without further altering the above repolarization parameters observed during hypokalaemia. Conclusion: Reduced SD2/SD1, increased entropy and decreased short-term fluctuation slope are associated with ventricular arrhythmogenesis in hypokalaemia. Heptanol exerts anti-arrhythmic effects without affecting repolarization variability.

Novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants of concern (VOC) are constantly threatening global public health. With no end date, the pandemic still persists with the emergence of novel variants that threaten the effectiveness of diagnostic tests and vaccines. Mutations in the Spike surface protein of the virus are regularly observed in the new variants, potentializing the emergence of novel viruses with different tropism from the current ones, which may change the severity and symptoms of the disease. Growing evidence has shown that mutations are being selected in favor of variants that are more capable of evading the action of neutralizing antibodies. In this context, the most important factor guiding the evolution of SARS-CoV-2 is its interaction with the host’s immune system. Thus, as current vaccines cannot block the transmission of the virus, measures complementary to vaccination, such as the use of masks, hand hygiene, and keeping environments ventilated remain essential to delay the emergence of new variants. Importantly, in addition to the involvement of the immune system in the evolution of the virus, we highlight several chemical parameters that influence the molecular interactions between viruses and host cells during invasion and are also critical tools making novel variants more transmissible. In this review, we dissect the impacts of the Spike mutations on biological parameters such as (1) increase of Spike binding affinity to hACE2; (2) bound time for the receptor to be cleaved by the proteases; (3) how mutations associate with increase of RBD up-conformation state in the Spike ectodomain; (4) expansion of uncleaved Spike protein in the virion particles; (5) increment of Spike concentration per virion particles; and (6) evasion of the immune system. These factors play key roles in the fast spreading of SARS-CoV-2 variants of concern, including the Omicron.

This paper describes the successful application of the Transformer model used in the natural language processing and vision tasks as a means of processing the time series of signals from gyroscope and accelerometer sensors for the classification of human activities. The Transformer model is based on deep neural networks with many layers which can generalize well on signals. All measured signals come from a smartphone placed in a waist bag. Activity prediction is sequence-to-sequence, each time step of the signal is assigned a designation of the performed activity. Emphasis is placed on attention mechanisms, which express individual dependencies between signal values within a time series. In comparison with another recent result, the recognition precision was improved from 89.67 percent to 99.2 percent. The transformer model should in the future be included among the top options in machine learning methods for human activity recognition.

The ratio of males to females with ASD is generally quoted as 4:1 though it is believed that there are biases preventing females being diagnosed and that the true ratio is lower. These biases have not been clearly identified or quantified. Starting with a clinical dataset of 1711 children <18 years old four different methods were employed in an inductive study to identify and quantify the biases and calculate the proportion of females missed. A mathematical model was constructed to compare the findings with current published data. The true male to female ratio appears to be 3:4. Eighty per cent of females remain undiagnosed at age 18 which has serious consequences for the mental health of young women.

As V2X technology develops, acute problems related to reliable and secure information exchange between network objects in real time appear. The article aims to solve the scientific problem of building a network architecture for reliable delivery of correct and uncompromised data within the V2X concept to improve the safety of road users, using blockchain technology and mobile edge computing (MEC). The authors present a formalized mathematical model of the system, taking into account the interconnection of objects and V2X information channels, and an energy-efficient algorithm of traffic offloading to the MEC server. The paper presents the results of application of blockchain technologies and mobile edge computing in the developed system, their description, evaluation of advantages and disadvantages of the implementation.

Sustainability is very important in business. The residential high-rise building all firms wanted to successful and sustainability in business. There is need the construction to completed low time, low cost and high quality in construction work. Therefore, real estate developers must find various strategies to use in construction projects to achieve goals and success of the firm. The purpose of this study was to indicate the very importance of knowledge management can lead to sustainability in business. Analyze 14 critical success to sustainability in residential high-rise building projects, collected questions from literature review, and survey in deep interview senior managers of 15 projects real estate development firms listed on the stock market of Thailand. Budget building more than 1000 million baht per project. From conceptual frame work five foundations integrated to knowledge management of critical success (KMITL PROCESS) used made tool survey in deep interview the critical success to sustainability in residential high-rise building project from project managers. Used IBM SPSS evaluated the critical success to sustainability. Found was one very important of critical success to sustainability, which was quality of products x̄ = 4.83. All 14 critical success to sustainability was found can applied made the knowledge management of critical success to sustainability in residential high-rise building project in firm. Especially in the field of construction managements project can used improve of all construction projects.

We show that an exponential income distribution will emerge spontaneously in a peer-to-peer economic network that shares the publicly available technology. Based on this finding, we identify the exponential income distribution as the benchmark structure of the well-functioning market economy. However, a real market economy may deviate from the well-functioning market economy. We show that the deviation is partly reflected as the invalidity of exponential distribution in describing the super-low income class that involves unemployment. In this regard, we find, theoretically, that the lower-bound u of exponential income distribution has a linear relationship with (per capita) unemployment compensation. In this paper, we test this relationship for the United Kingdom from 2001 to 2015. Our empirical investigation confirms that the income structure of low and middle classes (about 90% of populations) in the United Kingdom exactly obeys exponential distribution, in which the lower-bound u is exactly in line with the evolution of unemployment compensation.

Indonesia is an interesting case study for students of sustainable development and sustainable energy due to its ability to connect the multiple “worlds” it has become part of. Indonesia is an important bridge to Muslim countries, the voice of the Global South in the G20 and a main pillar of the 134-country-strong G77. Indonesia’s development trajectory is also key to the achievement of the Paris Climate Agreement as well as of the 2030 Agenda. Students can learn from how Indo-nesia address contradictions that would have been unsurmountable for other countries. Indone-sia’s energy transition offers helpful lessons, because of its aspiration to become a developed country by 2045. This goal is only possible when a country is able to effectively address barriers and caveats to sustainable energy. It is interesting how Indonesia focuses on silver linings and come up with pragmatic solutions to energy-related issues. This is followed by the “teaching guide,” which provides recommendations how the lessons from Indonesia can be embedded into a learning experience. The “learning activation approach” is introduced, which encourages stu-dents to systematically reflect on the complexity of selected contexts and understand this com-plexity by looking at the technical issues and processes that allow decision-making.

Peer-to-peer (P2P) energy trading is a new data-driven business model currently being trialed within the energy sector. Introducing P2P transactions to an essential service such as energy could have far-reaching implications for individuals and the grid. This paper raises considerations and questions from social, economic/markets and regulatory points of view, that should be understood and addressed by societies and policymakers. It does this by considering under what circumstances it is reasonable to conceptualize P2P energy trading as part of the sharing economy, and drawing parallels to the sharing economy experience in other sectors. In order to reap the full societal benefits, while avoiding considerable risks to infrastructure and individuals, a policy approach promoting dialogue and innovation is necessary. We suggest the regulatory sandbox is the most appropriate tool to achieve this and would help avoid the breakdown of trust between policymakers and platform companies observed in other sectors.

Paraphrase generation is an important yet challenging task in NLP. Neural network-based approaches have achieved remarkable success in sequence-to-sequence(seq2seq) learning. Previous paraphrase generation work generally ignores syntactic information regardless of its availability, with the assumption that neural nets could learn such linguistic knowledge implicitly. In this work we make an endeavor to probe into the efficacy of explicit syntactic information for the task of paraphrase generation. Syntactic information can appear in the form of dependency trees which could be easily acquired from off-the-shelf syntactic parsers. Such tree structures could be conveniently encoded via graph convolutional networks(GCNs) to obtain more meaningful sentence representations, which could improve generated paraphrases. Through extensive experiments on four paraphrase datasets with different sizes and genres, we demonstrate the utility of syntactic information in neural paraphrase generation under the framework of seq2seq modeling. Specifically, our GCN-enhanced models consistently outperform their syntax-agnostic counterparts in multiple evaluation metrics.

Why are pieces of spaghetti generally broken into three to ten segments instead of two as one thinks? How can one obtain the desired number of fracture segments? For these problems, in this paper a strand of spaghetti is considered an elastic rod, and the finite-element software ABAQUS is used to simulate the detailed fracture dynamics of the elastic rod. By changing the size (length and diameter) of the rod, the relevant data on the fracture limit curvature and the number of fractured segments of the elastic rod are obtained. The ABAQUS simulation results confirm the scientific judgment of B. Audoly and S. Neukirch (Fragmentation of rods by cascading cracks: Why spaghetti does not break in half. Phys Rev Lett 95: 095505). Using dimensional analysis to fit the finite-element data, two relations of the elastic rod fracture dynamics are obtained: (1) the relationship between the fracture limit curvature and the diameter, and (2) the relationship between the number of fracture segments and the diameter-length ratio. Results reveal that when the length is constant, the larger the diameter (the smaller the diameter-length ratio D/L), the smaller the limit curvature; and the larger the diameter-length ratio D/L, the fewer the number of fractured segments. The relevant formulations can be used to obtain the desired number of broken segments of spaghetti by changing the diameter-to-length ratio.

1) Background: Intellectual disability is more common in low- and middle-income countries than in high-income countries. Stigma and discrimination have contributed to barriers to people with intellectual disability accessing healthcare. As part of a larger study on caregiving of children with intellectual disability in urban Cape Town, South Africa, we interviewed a sub-group of families who had never used the intellectual disability services available to them, or who had stopped using them; 2) Methods: We employed a qualitative research design and conducted semi-structured interviews to explore the views and perspectives of parents and caregivers of children with intellectual disability who are not using specialised hospital services. We developed an interview guide to help explore caregivers’ and parents’ views; 3) Results: Results revealed that caregivers and parents of children with intellectual disability did not use the service due to financial difficulties, fragile care networks and opportunity costs, community stigma and lack of safety, lack of faith in services and powerlessness at effecting changes, and self-stigmatisation; 4) Conclusion: Current findings highlight a need for increased intervention at community level and collaboration with community-based projects to facilitate access to services, and engagement with broader issues of social exclusion.

Achieving sustainable management of forests in China is becoming increasingly important with more awareness and realization of the importance of forests in environmental protection. Forest certification, a market-based instrument to promote sustainable forest management, has been recognized by many countries including China. While landowners’ perception and perspective regarding this voluntary program have been well-documented in literature, how to motivate and incentivize landowners to participate in forest certification remained under-studied questions. With the face-to-face survey of landowners in Shandong, China, this study analyzed landowners’ willingness to accept compensation for participating in forest certification. Results indicated that landowners average accepted compensation, in terms of increased timber price, was about RMB120 (~$17.2)/m3 to have their forests certified. Results from multiple regression showed that the level of such compensation required for certification adoption was influenced by ownership size, owners’ demographics, certification program requirements, as well as importance placed on timber sale. These findings would inform policy-makers in designing compensation-related polices and establish incentive-based mechanisms to motivate landowners participate in forest certification programs in China.