The proportion of area under various crops at a given point in time, known as a cropping pattern, plays an essential role in determining the level of agricultural production. In this study, cropping patterns of three sub-counties in Murang’a County, a typical African smallholder farming area in Kenya, were mapped. Specifically, we compared the performance of eight classification scenarios for mapping cropping patterns; namely using (i) only Sentinel-2 reflectance bands (S2), (ii) S2 and S2 derived vegetation indices (VIs); (iii) S2 and S2 vegetation phenology (VP); (iv) S2 and Sentinel-1 radar backscatter data (S1); (v) S2, VIs, and S1; (vi) S2, VP, and S1; (vii) S2, VIs and VP, and (viii) S2, VIs, VP and S1. Reference data of the dominant cropping patterns and non-croplands were collected. The guided regularized random forest (GRRF) algorithm was used to select the optimum variables and to perform the respective classification for each scenario. The most accurate result of the overall accuracy of 93.16% was attained from the scenario (viii) S2, VIs, VP, and S1. The McNemar’s test of significance did not show significant differences (p≤0.05) among the tested scenarios. Our study demonstrated the strength of GRRF and the synergetic advantage of S2 and S1 derivatives to map cropping patterns in a heterogeneous landscape where high resolution imagery are inaccessible. Our cropping pattern mapping approach can be used in other sites of relatively similar agro-ecological conditions.

The business planning process can be considered as a strategic phase of any business. Given that the business plan is a management accounting tool, there are countless approaches that can be adopted to prepare it since there is no legal requirement, as opposed to obligations relating to financial accounting. However, in general, every business plan consists of a numerical part (budget) and a narrative part. In this research, the author highlights, on the basis of experiences and commonly used theories, a standard process that can be adaptable to the business plan of any type of activity. The use of big data is highlighted as an essential part of feeding the data of almost all the steps of the budget. The author then manages to determine a generally applicable standard process, indicating all the data necessary to prepare an accurate and reliable business plan. A case study will provide adequate support to the demonstration of the immediate applicability of the proposed model.

The origin of SARS-CoV-2 is debated, even after 18 months into the COVID-19 pandemic and a special investigation conducted by the World Health Organization. The RaTG13 sequence has been a highlight of discussions surrounding the origin of SARS-CoV-2. Here we express our opinion about the need for better reporting standards for information about sequencing data, especially for pathogens, citing our findings with the reported RaTG13 genome.

Automatic ancient Roman coin analysis only recently emerged as a topic of computer science research. Nevertheless, owing to its ever-increasing popularity, the field is already reaching a certain degree of maturity, as witnessed by a substantial publication output in the last decade. At the same time, it is becoming evident that research progress is being limited by a somewhat veering direction of effort and the lack of a coherent framework which facilitates the acquisition and dissemination of robust, repeatable, and rigorous evidence. Thus, in the present article, we seek to address several associated challenges. To start with, (i) we provide a first overview and discussion of different challenges in the field, some of which have been scarcely investigated to date, and others which have hitherto been unrecognized and unaddressed. Secondly, (ii) we introduce the first data set, carefully curated and collected for the purpose of facilitating methodological evaluation of algorithms and, specifically, the effects of coin preservation grades on the performance of automatic methods. Indeed, until now, only one published work at all recognized the need for this kind of analysis, which, to any numismatist, would be a trivially obvious fact. We also discuss a wide range of considerations which had to be taken into account in collecting this corpus, explain our decisions, and describe its content in detail. Briefly, the data set comprises 100 different coin issues, all with multiple examples in Fine, Very Fine, and Extremely Fine conditions, giving a total of over 650 different specimens. These correspond to 44 issuing authorities and span the time period of approximately 300 years (from 27 BC until 244 AD). In summary, the present article should be an invaluable resource to researchers in the field, and we encourage the community to adopt the collected corpus, freely available for research purposes, as a standard evaluation benchmark.

The Public Health Alliance for Genomic Epidemiology (PHA4GE) (https://pha4ge.org) is a global coalition that is actively working to establish consensus standards, document and share best practices, improve the availability of critical bioinformatic tools and resources, and advocate for greater openness, interoperability, accessibility and reproducibility in public health microbial bioinformatics. In the face of the current pandemic, PHA4GE has identified a clear and present need for a fit-for-purpose, open source SARS-CoV-2 contextual data standard. As such, we have developed an extension to the INSDC pathogen package, providing a SARS-CoV-2 contextual data specification based on harmonisable, publicly available, community standards. The specification is implementable via a collection template, as well as an array of protocols and tools to support the harmonisation and submission of sequence data and contextual information to public repositories. Well-structured, rich contextual data adds value, promotes reuse, and enables aggregation and integration of disparate data sets. Adoption of the proposed standard and practices will better enable interoperability between datasets and systems, improve the consistency and utility of generated data, and ultimately facilitate novel insights and discoveries in SARS-CoV-2 and COVID-19.

This paper addresses a method to transmit streaming data via rolling shutter camera-based optical camera communications (OCC). Since the amount of data that can be contained within one frame is limited, and the continuity of received data cannot be guaranteed due to OCC environmental variations, we introduce the concept of dividing the streaming data into several fragmented sets that are transmitted sequentially. We propose a superframe to contain sequential packets of fragmented data and corresponding indexes, so that sequential packets for streaming data can be continuously collected. When redundant frame transmission is considered, any packet lost due to OCC environmental conditions can be recovered. Experimental results show that the proposed method can be successfully used to transmit streaming data, with the number of redundant frames required to acquire all data packets based on image resolution. In addition, we describe how to identify missing packets from a network point of view to reduce the number of redundant frames needed to acquire all the data. This paper presents baseline results of communication performance when sending streaming data via a rolling shutter-based OCC.

Recently, the intensities of natural disasters have increased significantly owing to climate change and various other environmental factors, causing unprecedented damage. Measures must be established to reduce damage from large-scale natural disasters caused by the rapidly changing environment. The Japanese government published a hazard map manual in 2015 and obligates the creation of a hazard map as a measure to reduce high-scale storm surges. This manual presents a typhoon model based on a parametric model that is used to create a hazard map. The Myers model assuming concentric circles, which is primarily used in East Asia, is disadvantageous as it cannot consider geographic characteristics. Therefore, a new parametric model is necessary to calculate wind and pressure fields, which change according to geographic characteristics. To improve this limitation of the Myers model, we calculated the wind and pressure fields considering geographical effects by combining the Holland model, which can consider the size of a developing typhoon, and the Mascon model, which changes by geographic characteristics. To determine the gradient coefficient of the Holland model, the coefficient that changes every moment was calculated using grid point value data. The result indicated excellent reproducibility of storm surge height according to the geographic characteristics.

In research applications across several areas, noise removal is indispensable for accuracy of final results. Noise is caused due to physical principals, such as background electronic noise, quantum effect, and wave rebound effect to name a few. Noise removal can help improve results in medical, astronomy, defense, and numerous other fields. Addressing this limitation would result in potentially low cost, automatic, and reliable systems. In this paper, a generalized new approach i.e. Multi-Frame Noise Removal (MFNR) is proposed for noise removal. Given any type of data, the probability density function (PDF) of the noise can be determined. Herein, we extracted the noise PDF parameters using KDE (Kernel Density Estimation). Because the data is corrupted by “deterministic” noise, hence can be cleaned. This could be used as a general purpose noise removal tool. The data point with same position in multiple frames helps us determine the noise PDF characteristics and hence making it possible to remove noise. The conventional wisdom which states that noise removal and detail preservation are contrary to each other is not true for MFNR. Experimental results validate our proposed method which showed practically complete noise reduction based on number of frames used, as compared to existing benchmark methods.

The world is facing new challenges every day; however, with the spread of the pandemic around the world, this new challenge is different. The pandemic is increasing and concentrating various challenges simultaneously. Although different sectors are facing consequences, the most important sectors, that is, health and economy are the most affected. When the pandemic began, it was not known how long it would last, which complicated health and economic planning. Therefore, it is important for decision makers and the public to know the predictions and expectations of the future of these challenges. In this work, the current situation is analyzed. Then, an expectation model is developed based on the statistics of the pandemic using a growth rate model based on an exponential and logarithmic rate of increase. Based on the available open data about the pandemic spread, the model can successfully predict future expectations, including the duration and maximum number of cases of the pandemic. The model uses the equilibrium point as the day the cases decrease. The model can be used for planning and the development of strategies to overcome these challenges.

A novel software engineering platform called the Dynamic Nuchwezi Architecture Platform (DNAP) is introduced, specified and its novelties explained. The unique features of this platform are explained and several new concepts and abstractions upon which its implementation, usage, and analysis are hinged also elaborately discussed. The motivations for this new approach to building especially tools used in data engineering are spelled out and the platform is contrasted against other existing technologies of a similar kind. Finally, it is shown what known limitations DNAP suffers, as well as what room for further research and improvement there is in this field.

Storing scientific data on the file system in a meaningful and transparent way is no trivial task. In particular when the data have to be accessed after their originator has left the lab the importance of a standardized file structure cannot be underestimated. It is desirable to have a structure that allows for the unique categorization of all kinds of data from experimental results to publications. It has to be accessible to a broad variety of workflows, e.g., via graphical user interface as well as via command line, in order to find widespread acceptance. Furthermore, the inclusion of already existing data has to be as simple as possible. We propose a three-level structure to organize and store scientific data that incorporates the full chain of scientific data management from data acquisition to analysis to publications. Metadata are saved in a standardized way and connect original data to analyses and publication as well as to their originators. A simple software tool to check a file structure for compliance with the proposed structure is presented.

On 25 May 2018, the General Data Protection Regulation (GDPR)Article 17, the Right to Erasure (‘Right to be Forgotten’) came into force making it vital for organisations to identify, locate and delete all Personally Identifiable Information (PII) where a valid request is received from a data subject to erase their PII and the contractual period has expired. This must be done without undue delay and the organisation must be able to demonstrate reasonable measures were taken. Failure to comply may incur significant fines, not to mention impact to reputation. Many organisations do not understand their data, and the complexity of a hybrid cloud infrastructure means they do not have the resources to undertake this task. The variety of available tools are quite often unsuitable as they involve restructuring so there is one centralised data repository. This research aims to demonstrate compliance with GDPR’s Article 17 Right to Erasure (‘Right to be Forgotten’) is achievable in a Hybrid cloud environment by following a list of recommendations. However, 100% retrieval, 100% of time will not be possible, but we show that small organisations running an ad-hoc Hybrid cloud environment can demonstrate that reasonable measures were taken to be Right to Erasure (‘Right to be Forgotten’) compliant.

Containers are gaining popularity in life science research as they provide a solution for encompassing dependencies of provisioned tools, simplify software installations for end users and offer a form of isolation between processes. Scientific workflows are ideal for chaining containers into data analysis pipelines to aid in creating reproducible analyses. In this manuscript we review a number of approaches to using containers as implemented in the workflow tools Nextflow, Galaxy, Pachyderm, Argo, Kubeflow, Luigi and SciPipe, when deployed in cloud environments. A particular focus is placed on the workflow tool’s interaction with the Kubernetes container orchestration framework.

In this study, we investigate spectral structure of conformable Sturm-Liouville problems and with this end, we obtain representation of solutions under different initial conditions and asymptotic formulas for eigenfunctions, eigenvalues, norming constants and normalized eigenfunctions. Consequently, we prove the existence of infinitely many eigenvalues. Also, we compare the solutions with graphics with different orders, different eigenvalues, different potentials and so, we observe the behaviors of eigenfunctions. We give an application to the α-orthogonality of eigenfunctions and reality of eigenvalues for conformable Sturm-Liouville problems defined by [15] in the last section.

Since World War I, the commercial aviation industry has seen many improvements that now allow people and goods to reach the other side of the world in few hours, consuming much less fuel than in recent decades. Improvements in cargo capacity and energy efficiency were significant and, in this scenario, commercial airlines were able to thrive and bring great benefits to world economy. However, this sector is facing environmental challenges due to the intensive use of aviation fuel. Brazil is one of the largest domestic air passenger markets in the world and still has great growth potential, considering its economic potential and territorial dimensions: roughly the same size as the US and twice the size of the European Union. This paper discusses partial productivity of jet fuel in Brazilian domestic aviation and proposes an econometric method to support public regulators and airlines decisions. The proposed model uses variables such as aircraft size, route characteristics and idle flight capacity in a panel data analysis. The results show that reducing idle capacity is one of the best ways to achieve better short-term fuel efficiency and therefore will reduce environmental impacts and have positive economic effects on commercial air transport activities.

Control And Data Acquisition (SCADA) systems currently monitor and collect a huge among of data from all kind of processes. In practice, due to sensor failures or to communication errors, in the long-time running, some data may be lost. When it happens, given the nature of these failures, information is lost in bursts, that is, sets of consecutive samples, which besides can be very long. Data completion is a critical step, which must be done with the utmost rigour in order to not propagate errors in the rest of the processing chain stages. Some Big Data techniques do not work if the data series are incomplete, due to the loss of some data. When this occurs it is necessary to fill out the gaps of the historical data with a reliable data completion method. This paper presents an ad-hoc method to replenish the data lost by a SCADA system in case of long bursts. The data correspond to levels of drinking water tanks of a Water Network company that present patterns on a daily and a weekly scale. A method based on tensors is used to take advantage of the data structure. A specially designed \textit{tensorization} is employed to deal with bursts of missed data, applying a twice tensor decomposition and a signal continuity correction. Statistical tests are realized, which consist of apply the data reconstruction algorithms, by deliberately removing bursts of data in verified historical database servers, to be able to evaluate the real effectiveness of the tested methods. For this application, the presented approach outperforms the other techniques found in the literature.

A common motivation for increasing open access to research findings and data is the potential to create economic benefits – but evidence is patchy and diverse. This study systematically reviewed the evidence on what kinds of economic impacts (positive and negative) open science can have, how these comes about, and how benefits could be maximized. Use of open science outputs often leaves no obvious trace, so most evidence of impacts is based on interviews, surveys, inference based on existing costs, and modelling approaches. There is indicative evidence that open access to findings/data can lead to savings in access costs, labour costs and transaction costs. There are examples of open science enabling new products, services, companies, research and collaborations. Modelling studies suggest higher returns to R&D if open access permits greater accessibility and efficiency of use of findings. Barriers include lack of skills capacity in search, interpretation and text mining, and lack of clarity around where benefits accrue. There are also contextual considerations around who benefits most from open science (e.g. sectors, small vs larger companies, types of dataset). Recommendations captured in the review include more research, monitoring and evaluation (including developing metrics), promoting benefits, capacity building and making outputs more audience-friendly.

Dietary factors are one of the risk factors that can impact the brain chemistry, which leads to mental distress. Based on our data mining approach, we found that mental distress in men is associated with eating unhealthy food. Our aim in this paper is to apply results from our big data analytics approach to inform system dynamics (SD) modeling to investigate the causal relationships between brain structures, nutrients from food and dietary supplements, and mental health. We perform descriptive analysis based on a large data set to estimate the SD modeling parameters. Finally, we calibrate the model towards a time series data collected for individuals on their dietary and distress patterns. The results reveal that bridging these different methodologies leads to further insights from the SD model and decreases the error of calibrated parameter values. Future research is needed to validate our initial results for investigating the relationship between mental distress and dietary intake.

The Surface Water and Ocean Topography (SWOT) mission, to be launched in 2021, will provide water surface elevations, slopes, and river width measurements for rivers wider than 100 m. In this study, synthetic SWOT data are assimilated in a regional hydrometeorological model in order to improve the dynamics of continental waters over the Garonne catchment, one of the major French catchments. The aim of this paper is to demonstrate that the sequential assimilation of SWOT-like river depths allows the correction of river bed roughness coefficients and thus simulated river depths. An extended Kalman Filter is implemented and the data assimilation strategy was applied to four experiments of gradually increasing complexity regarding observation and model error over the 1995-2000 period. With respect to a “true” river state, assimilating river depths allows the proper retrieval of constant and spatially distributed roughness coefficients with a root mean square error of 1 m1/3 s-1, and the estimation of associated river depths. It was also shown that river depth differences can be assimilated, resulting in a higher root mean square error for roughness coefficients with respect to the true river state. The last study shows how one can take into account more realistic sources of SWOT error measurements, in particular the importance of the estimation of the tropospheric water content in the process.

Automated machine classifications of galaxies are necessary because the size of upcoming surveys will overwhelm human volunteers. We improve upon existing machine classification methods by adding the output of SpArcFiRe to the inputs of a machine learning model. We use the human classifications from Galaxy Zoo 1 (GZ1) to train a random forest of decision trees to reproduce the human vote distributions of the Spiral class. We prefer the random forest model over other black box models like neural networks because it allows us to trace post hoc the precise reasoning behind the classification of each galaxy. We find that, across a sample of 470,000 Sloan galaxies that are large enough that details could be seen if they were there, the combination of SpArcFiRe outputs with existing SDSS features provides a better machine classification than either one alone on comparison to Galaxy Zoo 1. We suggest that adding SpArcFiRe outputs as features to any machine learning algorithm will likely improve its performance.

We present a methodology to enable users to interact with statistical information owned by an institution and stored in a cloud infrastructure. Mainly based on R, this approach was developed following the open-data philosophy. Also, since we use R, the implementation is mainly based on open-source software. R gives several advantages from the point of view of data management and acquisition, as it becomes a common framework that can be used to structure the processes involved in any statistical operation. This simplifies the access to the data and enable to use all the power of R in the cloud information. This methodology was applied successfully to develop a tool to manage the data of the Centre d’Estudis d’Opinió, but it can be applied to other institutions to enable open access to its data. The infrastructure also was deployed to a cloud infrastructure, to assure the scalability and a 24/7 access.

Ongoing debates regarding the virtues and challenges of implementing open science for brain imaging research mirror those of the larger scientific community. The present commentary acknowledges the merits of arguments on both sides, as well as the underlying realities that have forced so many to feel the need to resist the implementation of an ideal. Potential sources of top-down reform are discussed, along with the factors that threaten to slow their progress. The potential roles of generational change and the individual are discussed, and a starter list of actionable steps that any researcher can take, big or small, is provided.

This paper identifies a dilemma in the relationship between R^2 and price efficiency: After comprehensively studying the R^2 change around 7 well-known corporate events, neither the traditional understanding of R^2 as price inefficiency, nor the behavioral way of R^2 as price efficiency can explain the observed R^2 change around the events. We adopt an alternative methodology to replace the standard difference-in-difference regression and directly decompose the R^2 change. We find that, due to the endogeneity of events, the changes of R^2 are over-estimated. We further propose that in the event study setting, the R^2 change may be simply the consequence of the inflow/outflow of some trend-chasing investors, and it may be detached from price (in) efficiency. Empirical evidences are consistent with this hypothesis.

Binary star DataBase (BDB) is the database of binary/multiple systems of various observational types. BDB contains data on physical and positional parameters of 260,000 components of 120,000 stellar systems of multiplicity 2 to more than 20, taken from a large variety of published catalogues and databases. We describe the new features in organization of the database, integration of new catalogues and implementation of new possibilities available to users. The development of the BDB index-catalogue, Identification List of Binaries, is discussed. This star catalogue provides cross-referencing between most popular catalogues of binary stars. We describe ideas and methods for reliable cross-identification of different entities (systems, pairs, components) in binary and multiple stellar systems.

Passive microwave measurements have been available on satellites dating back to the 1970s on research satellites flown by the National Aeronautics and Space Administration (NASA). Since then, several other sensors have been flown to retrieve hydrological products for both operational weather applications (e.g., the Special Sensor Microwave/Imager–SSM/I; the Advanced Microwave Sounding Unit–AMSU) and climate applications (e.g., the Advanced Microwave Scanning Radiometer–AMSR; the Tropical Rainfall Measurement Mission Microwave Imager–TMI; the Global Precipitation Mission Microwave Imager–GMI). Here the focus is on measurements from the AMSU-A, AMSU-B and Microwave Humidity Sounder (MHS). These sensors have been in operation since 1998 with the launch of NOAA-15, and are also on board NOAA-16, -17, -18, -19 and the MetOp-A and -B satellites. A data set called the “Hydrological Bundle” is a Climate Data Record (CDR) that utilizes brightness temperatures from Fundamental CDRs to generate Thematic CDRs (TCDR). The TCDR’s include: Total Precipitable Water (TPW), Cloud Liquid Water (CLW), Sea-Ice concentration (SIC), Land surface temperature (LST), Land surface emissivity (LSE) for 23, 31, 50 GHz, rain rate (RR), snow cover (SC), ice water path (IWP), and snow water equivalent (SWE). The TCDR’s are shown to be in general good agreement with similar products from other sources such as the Global Precipitation Climatology Project (GPCP) and the Modern-Era Retrospective Analysis for Research and Applications (MERRA-2). Because of the careful intercalibration of the FCDR’s, little bias is found among the different TCDR’s produced from individual NOAA and MetOp satellites, except for normal diurnal cycle differences.

Many remote sensing analytical data products are most useful when they are in an appropriate regional or national projection, rather than globally based projections like Universal Transverse Mercator (UTM) or geographic coordinates, i.e., latitude and longitude. Furthermore, leaving data in the global systems can create problems, either due to misprojection of imagery because of UTM zone boundaries, or because said projections are not optimised for local use. We developed the open-source Irish Earth Observation (IEO) Python module to maintain a local remote sensing data library for Ireland. This pure Python module, in conjunction with the IEOtools Python scripts, utilises the Geospatial Data Abstraction Library (GDAL) for its geoprocessing functionality. At present, the module supports only Landsat TM/ETM+/OLI/TIRS data that have been corrected to surface reflectance using the USGS/ESPA LEDAPS/ LaSRC Collection 1 architecture. This module and the IEOtools catalogue available Landsat data from the USGS/EROS archive, and includes functions for the importation of imagery into a defined local projection and calculation of cloud-free vegetation indices. While this module is distributed with default values and data for Ireland, it can be adapted for other regions with simple modifications to the configuration files and geospatial data sets.

Over the years, the Egyptian temples at Luxor city have been intensely investigated, but most of these studies just focused on the classical sides of the archaeological and historical descriptions. Many of the environmental problems are inevitable results of the unplanned urban crawling around the monuments temples. This paper aims at assessing the environmental changes around some temples of Luxor City using Remote sensing and GIS techniques. In particular, a historical database made up of Corona and Landsat TM data have been investigated along with the new acquisitions of Quickbird2 and Sentinel2. Results from our investigation highlighted rapid changes in urban and agricultural areas, which adversely affected the Egyptian monumental temples causing serious degradation phenomena. Using the information obtained from our RS&GIS based analysis, mitigation strategies have been also identified for supporting the preservation of the archaeological area.

The RPL protocol is a routing protocol for low power and lossy networks. In such a network, energy is a very scarce resource; so many studies are focused on minimizing global energy consumption. End-to-end latency is another important performance indicator of the network, but existing research tends to focus more on energy consumption and ignore the end-to-end delay of data transmission. In this paper, we propose a kind of energy equalization routing protocol to maximize the surviving time of the restricted nodes so that the energy consumed by each node is close to each other. At the same time, a multi-path forwarding route is proposed based on the cache utilization. The data is sent to the sink node through different parent nodes at a certain probability, not only by selecting the preferred parent node, thus avoiding buffer overflow and reducing end-to-end delay. Finally, the two algorithms are combined to accommodate different application scenarios. The experimental results show that the proposed three improved schemes improve the reliability of the routing, extend the lifetime of the network, reduce the end-to-end delay, and reduce the number of DAG reconfiguration.

An adaptive spatial clustering (ASC) algorithm is proposed in this present study, which employs sweep-circle techniques and a dynamic threshold setting based on the Gestalt theory to detect spatial clusters. The proposed algorithm can automatically discover clusters in one pass, rather than through the modification of the initial model (for example, a minimal spanning tree, Delaunay triangulation or Voronoi diagram). It can quickly identify arbitrarily-shaped clusters while adapting efficiently to non-homogeneous density characteristics of spatial data, without the need of prior knowledge or parameters. The proposed algorithm is also ideal for use in data streaming technology with dynamic characteristics flowing in the form of spatial clustering in large data sets.

This study examines the exchange rate rebound effects of the Central Bank intervention in the selected ECOWAS economies. An empirical understanding of these effects is very important to trade adjustment as well as the macroeconomic stability in these countries. Using the panel data modelling framework, the study finds that the impact of the Central Bank intervention on exchange rate is insignificant and it does not lead to the exchange rate rebound. In addition, money supply as well as monetary policy rate implemented by the monetary authorities significantly influences the level of exchange rate in a positive direction.

Visualizing geo-spatial data embedded into a three-dimensional terrain is challenging. The problem becomes even more complex when uncertainty information needs to be presented as well. This paper addresses the question of how to visually communicate all three aspects: the 3D terrain, the geo-spatial data, and the data-associated uncertainty. We argue that visualizing all aspects with a high degree of detail will likely exceed the visual budget. Therefore, we propose a visualization strategy based on prioritizing a selected aspect and presenting the remaining two with less detail. We discuss various design options that allow us to obtain differently prioritized visual representations. Our approach has been implemented as a tool for rapid visualization prototyping in the context of avionics applications. Practical solutions are described for a use case related to the visualization of 3D terrain and uncertain weather data.

The main contribution of this paper is to develop a graphical tool to evaluate the suitability of a candidate parametric model to fit a data set. The practical motivation is to check the adequacy of the so called SAINT model proposed in Jarner and Kryger (2011). This model has been implemented in practice by an important European pension fund concerned with setting annuity reserves for all current or former employees of Denmark. So, one particular relevant question is whether this mortality model is actually fitting old-age. Our graphical test can be described as follows. First we transform the data by means of the parametric model which is being evaluated. Should the model be correct, the transformed data will be in accordance with an Exponential distribution with rate 1. Then we construct a family of local linear hazard estimates based on the data on the transformed scale. Finally we use the statistical tool SiZer to assess the goodness-of-fit of the Exponential distribution to the data on the transformed scale. If the model is correct the SiZer map should not reveal any significant feature in the family of kernel estimates. Our method allow us to establish a diagnostic regarding the validity of the SAINT model when describing mortality patterns in four different countries.

Lithium ascorbate (LiAsc) is a non-toxic lithium salt (LD50>5000 mg/kg) with normothymic and neuroprotective properties. Chemoreactomic modeling of LiAsc predicted possible hepatoprotective effects which were tested here on a rat model of a non-alcoholic fatty liver disease (NAFLD) with multiorgan pathology caused by combined intake of excess saturated fats (palm oil), carbohydrates (fructose) and inorganic iron salt (ferrous sulfate). Dynamics of biochemical parameters (biomarkers of liver function, kidneys, hematopoiesis, inflammation, thrombus formation, etc.) and histological evidence of hemosiderosis in the model upon reproduction of the model are described. Experimental confirmations of the hepatoprotective effects of LiAsc were obtained. Comparison of the effects of LiAsc with the effects of myoinositol (a substance with known hepatoprotective properties) shown a number of differences in pharmacological action. Both LiAsc and MI lowered ferritin, transferrin saturation, serum iron, AST, ALT, serum creatinine, leukocytes (LiAsc to a greater extent) and normalized lowered serum protein and glomerular filtration rate. However, only LiAsc lowered heightened reticulocytes (absolute and fraction) and platelets towards the corresponding reference intervals, normalized levels of vitamin B12 in blood and lowered the number of Kupffer cells in liver that were overloaded with iron (contained Prussian blue in morphometric studies). In a clinical perspective, hepatoprotective properties of a neuroprotector and it’s potential to reduce hemosiderosis might be useful for treating patients with hepatic encephalopathy.

This study explores the optimization of the admission process at the Escuela Colombiana de Ingeniería Julio Garavito through data anal- ysis. By integrating advanced tools like Power BI, Python Flask, and data mining techniques, a model has been developed to improve student selection and retention, enabling more informed and effective decisions. The results indicate that applying data science not only facilitates efficient data management but also promotes more inclusive and equitable educational poli- cies. This pioneering approach in the field of higher education in Colombia offers a frame- work for future research and technological de- velopments, highlighting the vital importance of data science in improving educational and administrative processes.

Data security in the Internet of things (IoT) is often implemented by means of encryption, which can be burdensome for some entities. We propose in this paper a solution based on routing, by which data are forwarded only to entities that are intended to receive them. An IoT network can be seen as a partial order of equivalence classes of entities, and each entity can be labeled according to the position of its equivalence class in the partial order. The partial order can be constructed according to requirements of secrecy (or confidentiality), integrity and conflicts. Routing tables among entities can be compiled by using the labels. The method is demonstrated in this paper for Software defined networking (SDN) routers and controllers. We propose a centralized IoT architecture with a cloud structure using SDN as networking infrastructure, where storage entities (i.e. cloud servers) are associated with application entities. A small ‘hospital’ example is shown for illustration. Procedures for network reconfigurations are discussed. We also demonstrate the method for the normal case where different partial orders coexist among a set of entities. The method proposed does not impose an overhead on the normal functioning of an SDN network, since it requires calculations only when the network must be reconfigured, because of administrative intervention or policies.

How crucial is big data in contemporary molecular design? In this publication we elucidate fundamental concepts and terminology in this field, critically addressing overlooked issues. We thoroughly examine the size, accessibility, quality, and structural aspects of big data alongside the primary methodologies employed for their analysis. Within chemical compounds, properties and descriptors represent two distinct data types, forming the basis for categorizing molecular big data. The primary objective of chemistry is property production, which means we are searching for novel drugs or materials rather than chemical compounds, and big data is the central issue of this philosophy. The increasing availability of data in computer-aided technology propels advancements in artificial intelligence (AI), machine learning (ML), and deep learning (DL). Accordingly, a broad chemical audience must comprehend these methods to understand data-centered chemistry. Thus, we aim to systemize big data issues through a simple illustrative framework with fundamental descriptor categories: coding, computer-generated descriptors, and property correlates. Although we employ computer-generated descriptors as big data for predictions, the measured data are irreplaceable for achieving high-quality and reliable outcomes and controlling molecular effects. The scarcity of property data remains a significant hurdle limiting comprehensive studies on the structure-property relationships within big data. Accordingly, guided by pragmatics not-so-big data is an option for drug design. We presented also a brief review of the recent big data literature.

The paper investigates into the intricacies of semiconductor manufacturing, a highly complex process entailing a wide array of subprocesses and diverse equipment. Semiconductors are miniaturized integrated circuits comprising numerous components. The semiconductor manufacturing process begins with the thin disc-shaped silicon wafers. On each wafer, up to thousands of identical chips can be prepared depending upon the diameter of the wafer to build up the circuits layer by layer in a wafer fab. The size of the semiconductors requires a high number of units to be produced, thus necessitating a large amount of data to control for improving the semiconductor manufacturing process. Therefore, the collection and analysis of the equipment data, process data, and machine history data throughout the manufacturing process are required to diagnose faults, monitor the process, and manage the manufacturing process effectively. This research is focused on improving the semiconductor manufacturing process through a rigorous analysis of collected manufacturing process data, employing statistical process control (SPC), data mining techniques, and data-driven decision models. The project's primary objective is to increase the manufacturing process stability and productivity by utilizing the latest data-driven technologies in the scientific community. A structured review was undertaken, exploring contemporary data-driven methodologies in semiconductor manufacturing process improvement, specifically pertaining to process capability, product yield rate, and process stability. This review accentuates a comprehensive evaluation of data-driven methodologies applicable to conventional semiconductor manufacturing facilities, aiming to drive substantial process improvements. It features a detailed demonstration facilitating the selection of optimal semiconductor manufacturing processes to enhance overall operational performance. This study of process improvement in the semiconductor manufacturing steps through the application of data-driven methodologies will be effective in delivering advanced, real-time, and proactive control decisions throughout the manufacturing facilities. This endeavor is expected to promptly provide critical insights for enterprise manufacturing decision-makers to reduce manufacturing cycle time, improve the product yield rate, and increase the overall efficiency of the manufacturing process.

Objective: Determine the feasibility of utilizing longitudinal electronic dental record (EDR) data to track change over time in patient periodontal disease (PD) and to generate three patient cohorts: 1) patients whose disease did not change over time, 2) patients whose PD progressed, and 3) patients whose disease improved over time using informatics approaches. Methods: We conducted a retrospective study of 28,908 patients who received a comprehensive oral evaluation between January 1, 2009, and December 31, 2014, at the Indiana University School of Dentistry (IUSD) clinics. We developed and tested three automated computer applications to: 1) diagnose periodontitis cases from periodontal charting, 2) retrieve clinician-documented diagnoses from clinical notes, and 3) track disease change over time. We also evaluated the density of longi-tudinal EDR data for the following follow-up times: 1) none, 2) up to 5 years, 3) >5 and <=10 years, and 4) >10 and <=15 years Results: Thirty-four percent (n=9,954) of the study cohort had up to five years of follow-up visits with an average of 2.78 visits with periodontal charting information. An average of three patient visits per year that contained periodontal charts (63,552) were utilized to obtain a diagnosis, which is considered excellent. For clinician-documented diagnoses from clinical notes, 42% of patients (n=5,562) had at least two PD diagnoses to determine their disease change. In this cohort with cli-nician-documented diagnoses, 72% percent of patients (n=3,919) did not have a disease status change between their first and last visits, 669 (13%) patients' disease status progressed, and 589 (11%) patients’ disease improved. Conclusions: This study demonstrated the feasibility of utilizing longitudinal EDR data to track disease changes over 15 years during the observation study period. We found excellent longitudinal data when diagnoses generated from periodontal charting were considered (three visits per pa-tient). This information can be now utilized for studying the clinical course of periodontitis.

The analysis of the human movement patterns based on the mobile network data makes it possible to examine a very large population cost-effectively, and led to several discoveries about human dynamics. However, the application of this data source is still not common practice. The goal of this study was to analyze the commuting tendencies of the Budapest Metropolitan Area using mobile network data and propose an automatized alternative to the current, questionnaire-based method. Commuting is predominantly analyzed by the census, but that is performed only once in a decade in Hungary. To analyze commuting, the home and the work locations of the subscribers are determined based on their appearances during and outside the working hours. The home locations were compared to census data at a settlement level. Then, the settlement and district level commuting tendencies were identified and compared to the findings of census-based sociological studies. It has been found that commuting analysis based on mobile network data strongly correlates with the census-based findings, even though home and work locations have been estimated by statistical methods. All the examined aspects, including commuting from sectors of the agglomeration to the districts of Budapest and demographic distribution of the commuters, show that mobile network data can be an automatized, fast, cost-effective, and relatively accurate way of commuting analysis, that could provide a powerful tool to the sociologists interested in commuting.

In recent years, local governments have been using transportation card data to monitor the use of public transport and improve the service. However, local governments that are applying a single-fare scheme are experiencing difficulties in using data for accurate identification of real travel patterns, policy decision support, etc. because the information on alighting stops of users is missing. This policy limits its functionality of utilizing data such as accurate identification of real travel patterns, policy decision support, etc. Various studies to overcome this limitation have been conducted in South Korea and other countries to develop es-timation methodologies of alighting stops. Even existing studies introduce an advanced method, we found the margin for better accuracy by combining various estimation methodologies for estimating alighting stops. This study reviewed previously conducted studies to classify data with missing alighting stop information into trip types and then applied an appropriate alighting stop estimation methodology for the characteristics of each trip type by stage. The proposed method is evaluated by utilizing transportation card data of the Seoul metropolitan area and checked the accuracy for each standard of allowable error for sensitivity analysis. Furthermore, the number of trips, accuracy, and valid tag rate were checked for each type to examine the need for classifying the trip types. Finally, our evaluation also examines the impact of classifying trip types on estimation accuracy. The evaluation criteria are accuracy of the number of trips and valid tag rate. The analysis shows that the stage-by-stage estimation methodology based on the trip type proposed in this study can es-timate users’ destinations more accurately than previous studies. Furthermore, based on the construction of nearly 100% valid tag data, this study differs from prior studies.

Abstract: Spatially explicit, fine-grained datasets describing historical urban extents are rarely available prior to the era of operational remote sensing. However, such data are necessary to better understand long-term urbanization and land development processes and for the assessment of coupled nature-human systems, e.g., the dynamics of the wildland-urban interface. Herein, we propose a framework that jointly uses remote sensing derived human settlement data (i.e., the Global Human Settlement Layer, GHSL) and scanned, georeferenced historical maps to automatically generate historical urban extents for the early 20th century. By applying unsupervised color segmentation to the historical maps, spatially constrained to the urban extents derived from the GHSL, our approach generates historical settlement extents for seamless integration with the multi-temporal GHSL. We apply our method to study areas in countries across four continents, and evaluate our approach for two U.S. study sites against historical settlement extents derived from the Historical Settlement Data Compilation for the US, HISDAC-US, achieving Area-under-the-Curve values >0.9. Our results are largely in agreement with model-based urban areas from the HYDE database, and demonstrate that the integration of remote sensing derived observations and historical cartographic data sources opens up new, promising avenues for assessing urbanization, and long-term land cover change in countries where historical maps are available.

In this paper we explore extending the concept of common cross-study Common Data Element concepts beyond simple demographics to cover disease-specific concepts relevant to imaging. We test interactively linking the resulting database to the associated images in a federated manner. We examine the use of existing standards, not only for terminology, but for interchange of serialized data in forms familiar to imaging and clinical trials specialists and their dedicated systems. Our intent is to perform preliminary work to inform both the upcoming Imaging Data Commons specifically, as well as more general integration projects beyond imaging.

Health information technology has been widely used in healthcare, which has contributed a huge amount of data. Health data has four characteristics: high volume; high velocity; high variety and high value. Thus, they can be leveraged to i) discover associations between genes, diseases and drugs to implement precision medicine; ii) predict diseases and identify their corresponding causal factors to prevent or control the diseases at an earlier time; iii) learn risk factors related to clinical outcomes (e.g., patients’ unplanned readmission), to improve care quality and reduce healthcare expenditure; and iv) discover care coordination patterns representing good practice in the implementation of collaborative patient-centered care. At the same time, there are major challenges existing in data-driven healthcare research, which include: i) inefficient health data exchanges across different sources; ii) learned knowledge is biased to specific institution; iii) inefficient strategies to evaluate plausibility of the learned patterns and v) incorrect interpretation and translation of the learned patterns. In this paper, we review various types of health data, discuss opportunities and challenges existing in the data-driven healthcare research, provide solutions to solve the challenges, and state the important role of the data-driven healthcare research in the establishment of smart healthcare system.

Background: Although cervical cancer (CC) is highly preventable through appropriate screening methods like the Papanicolaou (Pap) test, which enables early detection of malignant and precancerous lesions, access to such screening has not been equitable across social groups. Sex workers and people with records of incarceration are among the most under-screened populations in Ontario. Little is known about the acceptability and feasibility of HPV self-sampling (HPV-SS) as an alternative cervical cancer screening method for these groups. This online, community-based mixed-methods pilot study aimed to address this knowledge gap. Methods Eighty-four under- and never-screened sex workers and ex-prisoners aged 25–69 years and residing in the Greater Toronto Area, were recruited by community peer associates. Participants completed an online survey and viewed short videos about CC and screening with Pap and HPV-SS. Those who opted for HPV-SS conducted the test at one of two collaborating organizations. Results The median age of participants was 36.5 years. Most had limited knowledge about CC and screening. Approximately 13% identified as non-binary, and 5% as two-spirit or trans men, with the majority having completed secondary education. Of participants, 88% chose HPV-SS, and one-third tested positive for high-risk HPV types. The ability to self-sample without judgment from healthcare providers was noted as a key advantage. However, there was a need for training on proper HPV-SS techniques. Conclusion To improve cervical cancer screening among sex workers, increasing awareness through participatory community co-creation of sexual health education is essential. Additionally, offering HPV-SS as a screening option is crucial, given its demonstrated acceptability and feasibility within this population, many of whom lack a primary care provider and face discriminatory attitudes in healthcare settings.

Supplementing essential amino acids (EAA), without considering non-EAA (NEAA) and energy contents in reduced crude protein (CP) diets may alter essential-to-total AA or true protein (E:T) and energy-to-protein ratios, potentially compromising growth. This study aimed to evaluate the effects of CP, E:T and net energy (NE) on broiler performance. Treatments were: T1— reduced CP (16%, RP), low NE (9.9 MJ/kg, LNE), low E:T (0.56, LE:T); T2—RP, LNE, high E:T (0.60, HE:T), with imbalanced EAA (excess Met and deficient Thr); T3—RP, high NE (10.4 MJ/kg, HNE), LE:T; T4—RP, HNE, HE:T; T5— normal CP (18%, NP), LNE, LE:T; T6—NP, LNE, HE:T; T7—NP, HNE, LE:T; and T8—NP, HNE, HE:T. The study employed as-hatched Cobb 500 broilers in two experiments. Exp.1 studied performance from d19 to 35, with 8 replicates per treatment and 16 birds per replicate (n=1024). Exp.2 measured NE values in respiration chambers from d25 to 28, with 6 replicates per treatment, and 2 birds (a male and a female) per replicate (n=96). The measured NE values were used to calculate NE intake (NEi) in Exp.1. The results showed that T4 improved (P &lt; 0.001) weight gain (WG), feed conversion ratio (FCR), and NEi relative to T1, T2 and T3, and protein efficiency (WG/CP intake) relative to all treatments. The live performance (feed intake, WG, FCR) and NEi of birds fed T4 reached a level equal to those of birds fed NP-diets (T5 to T8). These results suggest that a dietary E:T ratio of 0.60 is necessary to maximize nutrient utilization and to restore growth rate in broilers fed RP-diets.

This research explores a novel approach to integrating offshore wind farms into smart microgrids through the development of an advanced model predictive control (MPC) strategy for offshore wind turbines. The MPC strategy comprehensively incorporates complex wind dynamics, such as wind speed, direction, and turbulence, ensuring an accurate representation of turbine behavior. Additionally, the research includes models addressing wind farm layout, wake effects, and electrical infrastructure, enhancing the modeling framework's fidelity and applicability to real-world offshore wind energy systems within a smart microgrid environment. The inherent variability of wind power, transmission technology limitations, and the need for seamless transitions between grid-connected and islanded operation modes in smart microgrids necessitate robust control mechanisms. These mechanisms ensure efficient power capture, grid stability, and optimal energy utilization. To tackle these challenges, the research proposes a smart microgrid design incorporating both AC-DC and DC-DC conversion technologies. This design leverages renewable energy sources like solar and wind with AC-DC conversion for efficient power capture, integrates DC energy storage systems to store excess energy during low demand periods, and utilizes power control mechanisms to manage energy flow effectively within the smart microgrid. The study emphasizes the importance of modeling and control strategies for both AC-DC and DC-DC converters within the smart microgrid framework. To enhance the microgrid's cost-effectiveness, priority is given to the utilization of solar PV energy sources. It also highlights the integration of protection systems for DC faults and coordinated control of AC/DC breakers and converters. This comprehensive approach aligns with the core principles of adaptability, reliability, and sustainability in smart grids, aiming to advance smart microgrid technologies and pave the way for a more resilient, efficient, and secure energy future.

The scale of China's floating population is very large, and it is a key group that needs attention in promoting the equalization of basic public services. This study explores the impact and mechanism of adjusting the urban household registration threshold on the acquisition of citizenship status by the "rural-urban" floating population, with the household registration threshold as the link. It was found that the threshold for household registration has an impact on the willingness of rural urban migrant population to settle down from two aspects. On the one hand, a high threshold for household registration implies the unaffordability of obtaining citizenship status for the "rural-urban" migrant population, which has a significant crowding out effect on their willingness to settle down. Moreover, the high skilled "rural-urban" migrant population without housing is more sensitive to the high threshold for household registration. On the other hand, from the perspective of urban scale, the increase in the threshold for household registration has had a crowding out effect on the floating population for Type I large cities, mega cities, and super large cities. The increase in the threshold for settling in mega cities has the strongest crowding out effect on the floating population, which means that as the urban population expands, the welfare benefits enjoyed by the floating population in these cities will decrease, leading them to be more inclined to leave these cities and seek development opportunities in other cities. This study effectively answers how the threshold for household registration affects the willingness of rural urban migrant population to settle, providing mathematical support for urban development.

Robotic systems are crucial in modern manufacturing. Complex assembly tasks require the collaboration of multiple robots. Their orchestration is challenging due to tight tolerances and precision requirements. In this work we set up two Franka Panda robots performing a peg-in-hole insertion task. We structure the control system hierarchically, planning the robots’s trajectories feedback-based with a central policy trained with reinforcement learning. These trajectories are executed by a low-level impedance controller on each robot. To enhance training convergence, we use reverse curriculum learning incorporating domain randomization, varying initial configurations of the task. After training, we test the system in a simulation, studying the impact of curriculum parameters on emerging process characteristics like process time and variance. Finally, we transfer the trained model to a real-world setup, comparing results with simulation as well as classical path planning and control approaches.

This study examines the integration of Environmental, Social, and Governance (ESG) factors into global banking practices and their impact on financial stability, measured by the Bank to Capital Asset Ratio. Through a comprehensive literature review and data analysis, the paper highlights the dual role of banks as catalysts for ESG investment and risk managers. It discusses the challenges and opportunities in transitioning to ESG-aligned business models, emphasizing the importance of regulatory frameworks and risk management approaches. The findings suggest that ESG integration enhances bank stability and competitiveness, contributing to sustainable economic development. The paper concludes with policy implications and recommendations for further integration of ESG factors into banking governance.

This study investigated the influence of Teacher Availability -TAV (Number of Available Teachers, Teacher Punctuality -TP, Teacher Promptness to Class -TPC) on Student Academic Achievement (SAA) in Public Senior Secondary Schools (PSSS) in Southwestern Nigeria. The descriptive survey research design of correlational type was adopted while the multi-stage sampling procedure was used in the study. A simple random sampling technique was used to select three (Oyo, Ogun, and Ekiti) states out of the six in Southwestern Nigeria, as well as one Senatorial District (SD) from each state. The proportionate-to-size sampling technique was used to select 40% of the Local Government Areas (LGAs) in each SD and 50% (101) of the schools in the sampled LGAs. A class of 3,030 PSSS II was used; 202 Mathematics and English Language teachers and 202 Heads of Department (101 each from Science and Arts) were purposively sampled, while 101 school administrators were enumerated. The instruments were TP ( =0.75); TPC ( =0.82); English Language Achievement Test-ELAT (KR-20=7.47) and Mathematics Achievement Test-MAT (KR-20=7.46). Data were analysed using descriptive statistics. Respondents’ ages were 46.5±5.20 years (teachers) and 17.60±1.60 years (students). There were 59.0% male teachers and 57.0% female students. The SAA (ELAT=45.7% and MAT=38.4%) was low. Also, TAV ( =3.36) was high against the threshold of 2.5, and TAV (ß=0.59, t=7.29) significantly contributed to SAA. Teacher availability influenced the student academic achievement in public senior secondary schools in Southwestern Nigeria. Hence, all the education stakeholders should pay attention to this for improved student academic achievement.

Waste management is a critical issue globally, and Bangladesh is no exception, facing significant challenges due to rapid urbanization, population growth, and inadequate infrastructure. This article explores comprehensive waste management strategies, including waste segregation, recycling, composting, and waste-to-energy technologies, emphasizing their environmental and health benefits. It examines the past and present waste management conditions in Bangladesh, highlighting the progress made and the persistent challenges. The article also compares waste management practices in neighboring countries like India, Bhutan, Sri Lanka, and Nepal, offering insights into potential improvements for Bangladesh. Emphasizing the need for public awareness, community involvement, and modern infrastructure, it calls for collaborative efforts to achieve sustainable waste management and environmental preservation in Bangladesh. This article examines the critical issue of waste management, emphasizing its importance in mitigating environmental pollution, conserving resources, and protecting public health. It provides a detailed analysis of various waste management strategies, including waste segregation, recycling, composting, and waste-to-energy technologies, highlighting their benefits and implementation challenges. Focusing on Bangladesh, the article traces the evolution of the country's waste management system, from past inadequacies to recent improvements, while acknowledging persistent issues such as rapid urbanization and insufficient infrastructure. Comparisons with waste management practices in neighboring countries like India, Bhutan, Sri Lanka, and Nepal offer valuable insights and potential strategies for Bangladesh to adopt. The article underscores the necessity of public awareness, community involvement, and robust infrastructure to achieve effective waste management. It calls for a collaborative approach involving government, private sector, NGOs, and local communities to develop sustainable solutions. By investing in modern waste management technologies and fostering responsible consumption and disposal habits, Bangladesh can address its waste management challenges, ensuring environmental preservation, public health, and overall national well-being.

This study endeavors to elucidate the intricate interplay between gastronomic involvement, gastronomic knowledge, past gastronomic experiences, gastronomic attractiveness, destination attractiveness, tourist satisfaction, and the intention to revisit. In the context of this investigation, the research population comprises 300 international culinary tourists who have ventured to the Turkish Republic of Northern Cyprus (TRNC). Employing SPSS software, a confirmatory factor analysis (CFA) was conducted to rigorously assess construct validity, reliability, and the discriminant and convergent validity of the research model. The findings of this research study underscore the positive relationships that exist between various dimensions of gastronomy, namely involvement in gastronomy, knowledge of gastronomy, and previous gastronomic experiences, and the perceived attractiveness of gastronomy. These findings enhance our understanding of how culinary elements affect tourists' perceptions and experiences, highlighting the crucial role of gastronomy in destination appeal and visitor satisfaction. This research is a significant step towards enhancing our comprehension of the dynamic nexus between gastronomy and the tourism industry, ultimately benefiting destination management and strategy development.

Classification of pre-processed fMRI dataset using the functional connectivity(FC) based features is considered a challenging task due to high dimensional FC features set and smaller dataset size. To tackle this specific FC high dimensional features set and a smaller dataset size , We have proposed here a GAN based dataset augmenter to firstly train the GAN on the NYU Connectivity Features dataset and used the trained GAN to generate synthetic features per category and after getting sufficient number of features per category , A multi-head attention mechanism was used as a head for the classification . We name our proposed approach as "ASD-GANNet" which is End-To-End and does not require hand-crafted features as the multi-head attention mechanism focuses on the features that are more relevant . Moreover , We compared our results with the 06 available state-of-the-art techniques from the literature and Our proposed approach results using "NYU" site as a training set for generating GAN based synthetic dataset are promising. We achieved an overall 10-fold cross validation based accuracy of 82% ,sensitivity 82% and specificity 81% outperforming the available state-of-the art approaches. Sitewise comparison of our proposed approach also outperformed the the available state-of-the-art as out of the 17 sites our proposed approach has better results in the 10 sites.

We estimate general public’s willingness to pay (WTP) for agricultural soil quality protection and improvement in Spain (n=1000) and the UK (n=984) using data from a cross-sectional survey via Qualtrics panels in March-April 2021. We use a double bound dichotomous choice contingent valuation approach to elicit the individuals’ WTP. We investigate the effect of uncertainty on the success of policies aiming at achieving soil protection. In addition, to understand the heterogeneity in individuals’ WTP for agricultural soil quality protection and improvement we model individuals’ WTP through individual’s awareness and attitudes toward agricultural soil quality protection and the environment, trust in institutions; risk and time preferences; pro-social behavior and socio-demographics in Spain and the UK. We found that there is significant public support for agricultural soil quality protection and improvement in Spain and the UK. We also found that the support does not vary significantly under uncertainty of success of policies aiming at achieving soil protection. However the individual’s reasons for supporting agricultural soil quality protection and improvement are found to depend on the level of uncertainty and country. Hence, promoting public support for soil protection needs to be tailored according to the level of general public’s perceived uncertainty and geographic location.

Improving photobioreactor performance for microalgae cultivation has attracted many researchers over the past years. One of the primary challenges associated with existing photobioreactors is the light penetration. An effective photobioreactor design should maximize light penetration, ensuring uniform illumination throughout the reactor. This study aims to assess the impact of light intensity on microalgal growth from the perspective of energy efficiency and productivity in two photobioreactors. A novel cactus-like and a cylindrical photobioreactor were designed and fabricated using 3D printing technology. These two photobioreactors were used to cultivate two strains of microalgae. The novel photobioreactor achieved a maximum biomass productivity of 0.99 g/L/d and a maximum energy efficiency of 0.3139 g/d/kWh. The cylindrical photobioreactor reached a maximum biomass productivity of 0.74 g/L/d and 0.2199 g/d/kWh of energy efficiency. The increase in biomass productivity can be linked to enhancements in the photobioreactor's surface-to-volume ratio and better light utilization.

Seasonal precipitation variance significantly alters soil water content, potentially inducing water stress and affecting plant transpiration in semiarid deserts. This study explored the effects of environmental variables and hydraulic conductance on whole-tree transpiration (ET) in Mongolian pines (Pinus sylvestris var. mongolica) across different forest stages in the semiarid deserts of northern China. We measured ET using sap flow in mature (MMP), half-mature (HMP), and young (YMP) Mongolian pine plantations. Measurements included soil-leaf water potential difference (ΔΨ), atmospheric conditions, and soil moisture contents on sunny days, both in dry and wet periods. Seasonally variable rainfall distinctly affected soil moisture, correlating ET with photosynthetically active radiation (PAR) and vapor pressure deficit (VPD). Notable nocturnal sap flow occurred during the growing season. During the dry periods, both stomatal and hydraulic conductance influenced ET, whereas during the wet periods, stomatal conductance primarily regulated it. Discrepancies between predicted and measured ET were noticed: compared to the predicted ET, measured ET was lower during dry periods while higher during wet periods. Hydraulic conductance (KT) increased with tree height (H) and ΔΨ, although tall trees exhibited lower KT rates, suggesting that hydraulic compensation had occurred. This compensation, observed between 11:00 and 13:00, aligned with increased hydraulic resistance during dry periods. Decreasing hydraulic conductance intensified leaf water stress in dry periods, especially during the time when PAR and VPD were heightened, potentially increasing stomatal sensitivity to drought, promoting water conservation and plant survival. A linear relationship between predawn and midday leaf water potentials was noticed, indicating extreme anisohydric behavior across forest stages during both dry and wet periods. Although both stomatal and hydraulic conductance influenced ET during the dry period, MMP and YMP were more susceptible to drought conditions. Understanding these dynamics could help evaluate semiarid desert ecological functions for water conservation amidst uneven seasonal precipitation in Northern China.

The energy transition is a challenge that affects all sectors, from transport to civil structures and industry. With reference to the industrial sector, the greatest need is the decarbonisation of industries energy-intensive, such as producers of iron and steel, aluminium, cement, petrochemicals, paper, etc. In particular, the steel industry is a hard to abate high-emissivity industry which due to chemical processes and high thermal demands (often above 500 °C) contributed to 7.4% of global CO₂ in the year 2021. This paper has explored the potential applications of hydrogen in the hard-to-abate sectors, highlighting its versatility and significance in decarbonization efforts. It provides an overview of hydrogen production methods, emphasizing the importance of sustainable and green hydrogen production. It reviews hydrogen production methods, storage, and potential in blended combustion. In the final part of the article, some considerations are introduced on the possible role of hydrogen in the steel sector (both as a supplementary fuel and as a reducing agent in innovative processes), showing how although there is potential for its inclusion as an element for the decarbonization, it is necessary to evaluate the energy balances of the various processes and the methods of hydrogen production very carefully, in order not to risk obtaining a marginal effect.

Pulmonary arteriovenous malformations (PAVMs) are vascular anomalies resulting in abnormal connection between pulmonary arteries and veins. In 80% of cases, PAVMs are present from birth, but clinical manifestations are rarely seen in childhood. These congenital malformations are typically associated with Hereditary Hemorrhagic Telangiectasia (HHT), a rare disease that affects 1 in 5,000/8,000 individuals. HHT disease is frequently caused by mutations in genes involved in the TGF-β pathway. However, approximately 15% of patients do not have a genetic diagnosis and, among the genetically diagnosed, more than 33% do not meet the Curaçao Criteria. This makes clinical diagnosis even more challenging in the pediatric age group. Here, we introduce an 8 years old patient bearing a severe phenotype of multiple diffuse PAVMs caused by an unknown mutation which ended in lung transplantation. Phenotypically, the case of study follows a molecular pattern HHT-like. Therefore, molecular biology and cellular functional analysis has been performed in primary endothelial cells (ECs) isolated from the explanted lung. The findings revealed a loss of functionality in lung endothelial tissue and a stimulation of endothelial to mesenchymal transition. Understanding the molecular basis of this transition could potentially offer new therapeutic strategies to delay lung transplantation in severe cases.

Tumor to stroma ratio is a highly debated prognostic factor in the management of several solid tumors and there is no universal agreement on its practicality. In our study we proposed to confirm or dismiss the hypothesis that a simple measurement of stroma quantity is an easy-to-use and strong prognostic tool. We have included 74 consecutive patients with colorectal cancer who underwent primary curative abdominal surgery. The tumors have been grouped into stroma-poor (stroma &lt;10%), medium-stroma (between 10 and 50%) and stroma-rich (over 50%). The proportion of tumor stroma ranged from 5% to 70% with a median of 25%. Very few, only 6.8% of patients had stroma-rich tumors, 4% stroma-poor tumors and 89.2%tumors with a medium quantity of stroma. The proportion of stroma, at any cut-off, had no statistically significant influence on the disease specific survival. This can be explained by the low proportion of stroma-rich tumors in our patient group and the inverse correlation of stroma proportion with tumor grade. The real-life proportion of stroma-rich tumors and the complex nature of the stroma-tumor interaction has to be further elucidated.

This research focuses on the computational design and analysis of various winglet Design types on a Boeing 737 aircraft. The idea is to compare the efficiencies of various winglet design types on a Boeing 737 aircraft half wing span and the picking out the best winglet design in respect to the pressure generated at the wing-tip and the lift-to-drag ratio of each winglet designs. The coefficient of lift-drag ratio in this research contribute to the reduction of fuel consumption

Based on the multiple coordination framework of “promising government-effective market-ordered society”, this paper takes 68 cases of adding elevators to old buildings as samples, and selects six conditional variables: approval optimization, financial subsidies, financing innovation, technological innovation, capable people leading and neighborhood committee guidance. Using Crisp-Set Qualitative Comparative Analysis (csQCA), this paper discusses the combination of conditions that affect the success or failure. It is found that: approval optimization and neighborhood committee guidance are sufficient conditions for the success; successful cases can be divided into three types: “political and social dual-drive type”, “market and social dual-drive type” and “ternary co-drive type”; lack of approval optimization, lack of financing innovation, and the existence of capable people leading are necessary conditions for the failure. The failure cases can be divided into “government and market double failure type” and “market failure type”.

This paper aims to understand better how attitudes towards the environment could influence preferences and willingness to pay for the development of sustainable tourism products on the Spanish island of Gran Canaria. A hybrid choice model is estimated to analyse how different latent constructs related to environmental concerns affect individuals’ preferences for a set of sustainable tourism activities. The data used in the analysis is obtained from a discrete choice experiment where different scenarios with nature-based tourism packages are created. A set of measurement indicators allowed us to gain insight into the underlying latent structure regarding the individuals’ attitudes towards the environment. The analysis consists of integrating these attitudes into a choice model, focusing on a market segment primarily comprised of potential customers who are young residents and non-residents. Results reveal significant heterogeneity in preferences and willingness to pay for the various activities under study when attitudinal latent factors are incorporated into the model. Our findings provide valuable insights for researchers, policymakers, and practitioners promoting sustainable tourism products.

Treatment of various diseases, in particular cancer, usually needs targeting biologically active molecules at a selected subcellular compartment. We modified our previously developed modular nanotransporters (MNTs) for targeting mitochondria. The new MNTs are capable of binding to the protein predominantly localized on the outer mitochondrial membrane, Keap1. These MNTs possessing antiKeap1 monobody co-localize with mitochondria upon addition to the cells. They efficiently interact with Keap1 both in solution and within living cells. A conjugate of the MNT with a photosensitizer, chlorin e6, demonstrates significantly higher photocytotoxicity than chlorine e6 alone. We assume that MNTs of this kind can improve efficiency of therapeutic photosensitizers and radionuclides emitting short-range particles.

A clinical simulation web-based program, known as FIRST2ACT (Feedback Incorporating Review and Simulation Techniques to Act on Clinical Trends) is designed to increase the efficacy of cli-nicians’ actions in the recognition and immediate response to a patient’s deterioration. This study, which was nested in a larger mixed method project, used ten focus groups (n=65) of graduate, enrolled, registered nurses, Associate Nurse Unit Managers, and general manag-ers/educators/coordinators from four different institutions to investigate whether nurses felt their practice was influenced by participating in either a face-to-face or web-based simulation educa-tional programme about patient deterioration. Results indicate individuals who were less ‘tech-savvy’ appreciated the flexibility of web-based learning, which increased their confidence. Face-to-face students appreciated self-reflection through performance evaluation. While face-to-face simulations were unable to completely duplicate symptoms, they did show nurses' adaptability. Both interventions enhanced clinical practice by improving documentation and re-plies while also boosting confidence and competence. Web learners initially experienced tech-related anxiety, which gradually subsided, demonstrating healthcare professionals' resilience to new learning approaches. Overall, the study highlighted the advantages and challenges of web-based and face-to-face education in clinical practice, emphasising the importance of adapta-bility and reflective learning for healthcare professionals. Further exploration of specific topics is required to improve practice, encourage knowledge sharing among colleagues, and improve early detection of patient deterioration.

The E-learning system has achieved great development after the pandemic. In this work, we proposed three artificial intelligence-based enhancements to our linguistic interactive E-learning system from different aspects. Compared with the original phonetic transcription exam system, our enhancements include an MFCC+CNN-based disordered speech classification module, a Transformer-based Grapheme-to-Phoneme converter, and a Tacotron2-based IPA-to-Speech speech synthesis system. This work not only provides a better experience for the users of this system but also explores the utilization of artificial intelligence technologies in the E-learning field and linguistic field.

HSF1 is a well-known Heat Shock Protein expression regulator in response to stress. It also regulates processes important for growth, development, or tumorigenesis. Here, we studied the HSF1 influence on the phenotype of non-tumorigenic human mammary epithelial (MCF10A and MCF12A) and several triple-negative breast cancer cell lines. MCF10A and MCF12A differ by HSF1 levels, morphology, growth in the matrigel, expression of epithelial (CDH1) and mesenchymal (VIM) markers (MCF10A are epithelial cells, MCF12A resemble mesenchymal cells). HSF1 down-regulation led to reduced proliferation rate and spheroid formation in matrigel by MCF10A cells, while it did not affect the MCF12A proliferation but led to CDH1 up-regulation and the formation of better-organized spheroids. HSF1 overexpression in MCF10A resulted in reduced CDH1 and increased VIM expression, and the acquisition of elongated fibroblast-like morphology. The above results suggest that elevated levels of HSF1 may direct mammary epithelial cells toward a mesenchymal phenotype while lowering HSF1 could reverse the mesenchymal phenotype to an epithelial one. Therefore, HSF1 may be involved in the remodeling of mammary gland architecture over the female lifetime. Moreover, HSF1 levels positively correlated with the invasive phenotype of triple-negative breast cancer cells, and their growth was inhibited by the HSF1 inhibitor, DTHIB.

This paper presents the experimental and numerical study on a ductile beam-column connection between a composite reinforced concrete truss (CRCT) beam and Concrete Filled Tube (CFT) column subjected to bending and shear loads. Two experimental models with different beam-column joint testing schemes, extracted from the same prototype three-dimensional structure designed according to the rules of the capacity design provided by seismic code, were subjected to quasi-static cyclic tests by applying gravitational loads and the horizontal seismic force. The main objective of this paper is to verify the experimental ductile behavior of both specimens and to simulate the experimental global and local response by nonlinear static analysis considering different modelling approaches. The comparison between the experimental and numerical results highlights, for both models considered, the ductile and dissipative capacity of the connection system, designed following the criterion of the hierarchy of resistances proposed by the current Italian code. Different experimental setup showed similar results demonstrating the repeatability of the test and its reproducibility through the nonlinear numerical analysis.

This study examined the status of Education for Sustainable Development (ESD) practices and the understanding of Sustainable Development (SD) among Saudi kindergarten teachers in a specific governorate. Two hundred twenty-seven kindergarten teachers participated, and data was collected through a questionnaire. The results indicated that most kindergarten teachers (89.9%) were unaware of SD. The overall status of ESD practices among the participating teachers was weak, with an average score of 2.60 out of 4. Among the different dimensions, values (2.74), competencies (2.69), and practice (2.65) obtained relatively higher scores, while the content dimension (2.49) received the lowest score. Significant differences were found in the mean scores of ESD practices based on teachers’ qualifications and the type of school. However, no differences were observed based on experience. The lack of awareness regarding SD emerged as the primary barrier to implementing ESD in kindergarten institutions. Expanding teacher training was identified as the most crucial step in promoting ESD in kindergartens. The findings highlight the importance of raising awareness among Saudi kindergarten teachers about SD, providing professional development opportunities to enhance ESD implementation in classrooms, and creating teaching materials aligned with ESD principles.

We consider a coded compressed sensing protocol for unsourced massive random access (URA) that concatenates a shared Patterned Reed-Muller (PRM) inner codebook to an outer error-correction code. In this paper, an iterative list PRM projection algorithm is proposed to supplant the signal detector associated with the inner PRM sequences. In particular, we first propose an enhanced paths-saving algorithm called list PRM projection detection for the single-user scenario that keeps multiple candidates for the first few layers to remedy the risk of spreading errors. On this basis, we further propose an iterative list PRM projection algorithm for the multi-user scenario. The vectors for PRM codes and channel coefficients are jointly detected in an iterative manner, which offers significant improvements regarding the convergence rate for signal recovery. Furthermore, the performances of the proposed algorithms are analyzed mathematically, and we verified that the theoretical simulations are consistent with the numerical simulations. Finally, we concatenate the inner PRM codes that employ the iterative list detection to two practical error-correction outer codes. According to the simulation results, we conclude that the packetized URA with the proposed iterative list projection detection works better than benchmarks in terms of the number of active users it can support in each slot and the amount of energy needed per bit to meet an expected error probability.

Eco-labels are an instrument for enabling informed food choices and supporting a demand-sided change towards a more and urgently needed sustainable food system. Lately, novel eco-labels that depict a product’s environmental life-cycle assessment on a multi-level scale are being tested across Europe’s retailers. This study elicits consumers preferences and willingness to pay (WTP) for a multi-level eco-label. A Discrete Choice Experiment was conducted in Austria. Individual partworth utilities were estimated by means of Hierarchical Bayes. Results show higher WTP for a positive evaluated multi-level label, revealing consumers’ perceived benefits of colorful multi-level labels over binary black-and-white designs. Even a negative evaluated multi-level label showed higher WTP compared to no label, pointing towards limited effectiveness of eco-labels. Respondents’ preferences for eco-labels were independent from their subjective eco-label knowledge, health consciousness, and environmental concern. The attribute “protein source” was most important, and preferences for animal-based protein source (beef) was strongly correlated with consumers’ meat attachment, implying that a shift towards more sustainable protein sources is challenging and sustainability labels have only a small impact on the meat product choice of average consumers.

Obesity is a troubling public health problem worldwide as it increases risks of respiratory complications, systemic arterial hypertension, type 2 diabetes mellitus, sleep disorders, cardiovascular diseases, and metabolic syndrome (MetS). As a measure to counteract comorbidities associated with severe obesity, bariatric surgery stands out. This study aimed to investigate the adiponectin/leptin ratio in women with severe obesity with and without MetS undergone Roux-en-Y Gastric Bypass (RYGB) and to characterize the biochemical, glucose, and inflammatory parameters of blood in women with severe obesity before and after RYGB. Were enrolled female with severe obesity undergoing RYGP with MetS (n=11) and without (n=39). Anthropometric data and blood samples were obtained before and 6 months after RYGB to analyze total cholesterol, low-density lipoprotein (LDL), high- density lipoprotein (HDL), non-HDL total cholesterol, and glucose; and circulating levels of adiponectin and leptin. Significant reductions in weight, body mass index, and glucose, total cholesterol, LDL, and leptin were observed after surgery, with higher levels of HDL, adiponectin, and adiponectin/leptin ratio observed after surgery compared to preoperative values. This study demonstrated that weight loss induced by RYGB in patients with severe obesity with or without MetS improved biochemical and systemic inflammatory parameters, particularly the adiponectin/leptin ratio.

Background and Objectives: Acute lung injury (ALI) is an inflammatory response in the lung caused by bacteria, viruses, trauma and other factors that results in lack of alveolar surfactant and subsequently respiratory distress. Endothelial-to-mesenchymal transition (EndoMT) is closely related to ALI-induced pulmonary fibrosis development and progression. This study examined the effect of milk fat globulin factor 8 (MFGE8) knockdown and overexpression on lipopolysaccharide (LPS)-induced EndoMT. Methods: Total MFGE8 activity in patients with acute respiratory distress syndrome (ARDS) and healthy volunteers was assessed using a colorimetric kit. In vitro, cell morphology was observed by microscopy, and invasion and migration were tested by Transwell and scratch assays. Specific siRNAs were transfected into HLMECs to downregulate MFGE8, and CD31 and α-SMA protein expression was detected by fluorescence microscopy and FCM. MFGE8, BMP, Smad 1, Smad4, Smad5, Snail, CD31 and α-SMA protein and gene expression was assessed by western blotting (WB) and qRT‒PCR. In vivo, the changes in cell morphology and alveolar septum in the lung of mice (C57BL/6, aged 7-8 weeks, male) were observed by H&E staining. In addition, ECM deposition in lung tissue was detected by Masson staining. CD31 and α-SMA protein expression in lung tissue was measured by WB. Results: The serum level of MFGE8 was lower in the ARDS group than in the control group. MFGE8 was identified as a protective factor associated with hospital survival. In vitro, the treatment of human lung microvascular endothelial cells (HLMECs) with LPS for 96 h clearly changed the cells from the typical cobblestone shape of ECs to spindle-like fibroblasts. The scratch and Transwell assay results indicated that endothelial cell migration and invasion were enhanced in the LPS group compared with the control group. Fluorescence microscopy, FCM, WB and PCR showed that LPS greatly inhibited CD31 (endothelial marker) expression and increased α-SMA (mesenchymal marker) expression. These data showed that LPS could induce EndoMT in HLMECs. Notably, siRNA-treated HLMECs yielded the same results. The administration of rhMFGE8 to HLMECs in the LPS or LPS+siRNA group ameliorated the changes in cell morphology and decreased cell migration and invasion. rhMFGE8 attenuated the effect of LPS or LPS+siRNA on EndoMT induction by increasing CD31 and decreasing α-SMA protein and gene expression. Moreover, activation of BMP/Smad1/5-Smad4 signalling in response to LPS and Snail (related to EndoMT transcription factors) expression were increased by MFGE8 knockdown but inhibited by rhMFGE8. In vivo, H&E staining revealed a thickened alveolar septum in the LPS group, and the thickness increased over time; in contrast, rhMFGE8 reversed this effect. ECM deposition occurred early in ALI induced by LPS and increased over time, and the administration of rhMFGE8 reversed this effect. WB showed that LPS inhibited CD31 protein expression and increased α-SMA protein expression in lung tissue. Conclusions: rhMFGE8 exerts a protective effect early in LPS-induced EndoMT through BMP/Smad1/5/Smad4 signalling and could be a therapeutic target in ALI.

This study aimed to explore what factors affect teachers’ acceptance and instructional use of ICT in Chinese higher vocational colleges. Grounded in the modified UTAUT model, the current study investigated the direct and indirect effects of teachers’ performance expectancy, effort expectancy, external conditions, and behavioral intentions on using ICT in teaching. A total of 6087 teachers from 219 vocational colleges in 28 provinces in China participated in a large-scale survey. Structural equation modeling revealed that the teachers’ psychological perceptions (including performance expectancy, effort expectancy, and intention to use ICT technology) and the external support conditions (including professional development support, infrastructures, the climate of organizational reform and innovation, and teacher performance assessment mechanisms) significantly directly affect the use of ICT in Chinese higher vocational college teachers’ teaching practice. Moreover, this study confirmed the mediating role of teachers’ intention to use ICT in teaching in the relationship between teachers’ psychological perceptions and ICT instructional usage behavior. However, there were differences in the significance of these variables in the chain effect of teachers’ intention to use ICT. These findings expand our understanding of the factors influencing ICT use in teaching among VET teachers in China and thus provide practical implications for higher vocational college managers to promote teachers’ ICT teaching behaviors.

Proteomic analysis revealed the preservation of many proteins in the “Heslington brain” (which is at least 2,600-year-old brain tissue uncovered within the skull excavated in 2008 from a pit in Heslington, Yorkshire, England). Five of these proteins (“main proteins”), heavy, medium, and light neurofilament proteins (NFH, NFM, and NFL), glial fibrillary acidic protein (GFAP), and myelin basic (MBP) protein are engaged in the formation non-amyloid protein aggregates, such as intermediate filaments and myelin sheath. We used a wide spectrum of bioinformatics tools to evaluate the prevalence of functional disorder in several related sets of proteins, such as “main proteins” and their 44 interactors, as well as all other protein identified in the Heslington brain. These analyses revealed that all five “main proteins”, half of their interactors and almost one third of the Heslington brain proteins are expected to be mostly disordered. Furthermore, most of the remaining proteins are expected to contain sizable disordered regions. This is in contrary the expected substantial (if not complete) elimination of the disordered proteins from the Heslington brain. Therefore, it seems that the intrinsic disorder of NFH, NFM, NFL, GFAP, and MBP, their interactors and many other proteins might play a crucial role in preserving the Heslington brain by forming tightly folded brain protein aggregates, in which different parts are glued together via the disorder-to-order transitions.

This venture targets giving a correspondence framework that can improve the legal framework execution and cooperation and furthermore make it simple to lead execution audits. This examination depicts restricted admittance to the right legitimate data just as admittance to courts and court administrations as the essential factors that limit admittance to equity. The basic target fundamental for accomplishing the point incorporates planning an online easy to understand data framework that would improve correspondence and association between legal professionals like legal advisors and disputants. The undertaking uses a subjective methodology that zeroed in on the substance investigation of essential information. Key members were court laborers like attorneys and agents, just as court clients like disputants. Pre-plan discoveries uncovered that current legitimate data frameworks – basically court sites – neglect to recognize their crowd by treating all court clients similarly comparative with the correspondence of lawful data. Likewise, the issue of admittance to equity includes the significant expense of equity also, restricted legal data that elevates admittance to equity. Post-plan discoveries from the online overview directed after the turn of events and execution of the IT curio uncovered a powerful and productive legitimate data framework. Exploration discoveries supported the advancement of an IT antiquity that records for huge shortcomings in current legal data frameworks, for example, their failure to pass on fitting legitimate data intelligently and productively. In outline, the investigation prescribes the reception of saw control to work fair and square of certainty of court clients and the differentiation between court clients to convey the right data to the right crowd.

Image segmentation is a new challenge prob- lem in medical application. The use of medical imaging has become an integral part of research, as it allows us to see inside the human body without surgical intervention. Many researcher have studied brain segmentation. One stage method is used to segment the brain tissues. In this paper, we proposed the multi-stage generative ad- versarial network to solve the problem of information loss in the one-stage. We utilize the coarse-to-fine to improve brain segmentation using multi-stage generative adversar- ial networks (GAN). In the first stage, our model generated a coarse outline for (i) background and (ii) brain tissues. Then, in the second stage, the model generated outline for (i) white matter (WM), (ii) gray matter (GM) and (iii) cerebrospinal fluid (CSF). A good result can be achieved by fusing the coarse outline and refine outline. We conclude that our model is more efficient and accu- rate in practice for both infant and adult brain segmenta- tion. Moreover, we observe that multi-stage model is faster than prior models. To be more specific, the main goal of multi-stage model is to see the performance of the model in a few shot learning case where a few labeled data are available. For medical image, this proposed model can work in a wide range of image segmentation where the convolution neural networks and one-stage methods have failed.

Using low-cost portable air quality (AQ) monitoring devices is a growing trend in personal exposure studies enabling a higher spatio-temporal resolution and identifying acute exposure to high concentrations. Comprehension of results by participants is not guaranteed in exposure studies. However, information on personal exposure is multiplex, which calls for participant involvement in information design to maximise communication output and comprehension. This study describes and proposes a model of a user centred design (UCD) approach for preparing a final report for participants involved in a multi-sensor personal exposure monitoring study performed in seven cities within the EU Horizon 2020 ICARUS project. Using a combination of human-centred design (HCD), human-information interaction (HII) and design thinking approaches, we iteratively included participants in the framing and design of the final report. User needs were mapped using a survey (n=82), and feedback on the draft report was obtained from a focus group (n=5). User requirements were assessed and validated using a post-campaign survey (n=31). The UCD research was conducted amongst participants in Ljubljana, Slovenia and the results report was distributed among the participating cities across Europe. The feedback received made it clear that the final report was well-received and helped participants better understand the influence of individual behaviours on personal exposure to air pollution.

During the COVID-19 outbreak, most university courses have been offered on online platforms. A sudden shift from face-to-face classroom learning to online formats could influence the learning effectiveness of classes. This study aims to investigate differences in the learning effectiveness of online and face-to-face lecture courses. It also explores factors that impact the effectiveness of online instruction. These factors include interactions among learners, interactions between learners and the instructor, the quality of online platforms, learners’ ability to use devices and follow instructions, and learners’ situational challenges. The study participants were 261 university students at King Mongkut’s University of Technology Thonburi in Bangkok, Thailand. All participants were enrolled in at least one lecture course, such as history, humans and the environment, the environment and development, or general philosophy, during the 2019 academic year. A questionnaire was distributed to participants after they completed these courses in May 2020. Paired simple t-test analyses were used to compare the effectiveness of online and face-to-face classes, and a multiple regression analysis was used to identify factors that impact the learning effectiveness of online classes. The results show that online classes are less effective than face-to-face courses. The multiple regression analysis also revealed that the effectiveness of online learning was significantly impacted by learners’ ability to interact with classmates during class, their ability to interact with instructors after the class, the quality of online platforms, and disturbances or distractions in learners’ environments.

This research analyzed South Korean companies’ adoption of remote work during the COVID-19 pandemic, by focusing on the dual labor market structure comprising of the primary (large corporations) and the secondary sectors (small and medium enterprises (SMEs)). Companies in the dual labor market were classified as per firm size. We used Statistics Korea’s August supplementary data from the Economically Active Population Survey, covering 2017–2020. This empirical study analyzed the factors affecting remote work in 2020, after the outbreak of the pandemic. The results showed that the probability of large corporations introducing remote work during the pandemic increased by a significantly larger margin than for small and medium-sized firms. This suggests that the polarization within the dual labor market structure between large corporations and SMEs also spilled over into companies’ adoption of remote work, which was initially introduced to prevent the spread of the pandemic. Additionally, the polarization in the use of digital technology is likely to persist even after the pandemic. Hence, based on our analysis of remote work adoption in the dual labor market, this study examined the system and factors of labor-management relations contributing toward such polarization and presented policy directions for the current labor market structure.

The consequences of manipulations in structure and amino acid composition of native cyclolinopeptide A (CLA) from linen seeds and its linear precursor on their biological activities and mechanisms of action are reviewed. The modifications included truncation of the peptide chain, replacement of amino acid residues with proteinogenic or non-proteinogenic ones, modifications of peptide bond, and others. The studies revealed changes in the immunosuppressive potency of these analogs investigated in a number of in vitro and in vivo experimental models, predominantly in rodents, as well as differences in their postulated mechanism of action. The modified peptides were compared with cyclosporine A and parent CLA. Some of the synthesized and investigated peptides show potential therapeutic usefulness.

This is the first study to comprehensively evaluate the benefit of urban open spaces and cropland with different adjacent public facilities seen as locally undesirable (“not in my backyard,” NIMBY) or desirable (“yes in my backyard,” YIMBY). The total benefit increases or decreases for urban open space and cropland with adjacent NIMBY or YIMBY facilities in a municipality in Taiwan. The results show that for the city as a whole, the current arrangement of NIMBY and YIMBY in different zones decreases the total benefit of urban open spaces in highly urbanized zones and increases the total damage to cropland in extremely rural zones. This indicates a need to avoid further installing NIMBY or YIMBY facilities in already occupied urban open spaces. The results also demonstrate that locating NIMBY or YIMBY facilities near cropland fails to highlight the benefit of YIMBY facilities and magnifies opposition to NIMBY facilities. For individual housing units, the total damage is 1.87% of the average housing price for cropland-type open space with adjacent NIMBY or YIMBY facilities, and the total benefit is 7.43% of the average housing price for urban-type open space in a highly urbanized area. In contrast, the total benefit for open space with adjacent NIMBY or YIMBY facilities is a 2.95%-13.80% increase in the average housing price for areas with mixed urban open space and cropland.

This article examines the impact of some system parameters on an industrial system composed of two dissimilar parallel units with one repairman. The active unit may fail due to essential factors like aging or deteriorating, or exterior phenomena such as Poisson shocks that occur at various time periods. Whenever the value of a shock is larger than the specified threshold of the active unit, the active unit will fail. The article assumes that the repairman has the right to take any of two decisions at the beginning of the system operation: either a takes a vacation if the two units work in a normal way, or stay in the system to monitor the system until the first system failure. In case of having a failure in any of the two units during the absence of the repairman, the failing unit will have to wait until the repairman is called back to work. We suppose that the value of every shock is assumed to be i.i.d. with some known distribution. The length of the repairman’s vacation, repair time, and recall time are arbitrary distributions. Various reliability measures have been calculated by the supplementary variable technique and the Markov’s vector process theory. At last, numerical computation and graphical analysis have been given for a particular case to validate the derived indices.

One of the most used markers of cancer stem cells in several cancers, including colorectal cancer and breast cancer, is CD44. CD44 is a glycoprotein that traverses the cell membrane and binds to many ligands including hyaluronan resulting in activation of signaling cascades. Several reports have shown conflicting data on the expression of CD44 and that the expression depends on modes of investigations and subtypes of cancers. In addition, the correlation between CD44 expression and drug resistance, immune infiltration, EMT, metastasis and patients prognosis in several cancer types remains unclear. This study investigated CD44 expression in several cancers and explored its relationship with tumorigenesis using various publicly available databases, including The Cancer Genome Atlas, GEPIA, Oncomine, Genomics of Drug Sensitivity in Cancer and Tumor Immune Estimation Resource. Our analysis reveals that CD44 is differentially expressed in different cancers. CD44 expression is significantly associated with cancer patients’ survival in gastric, pancreatic and colorectal cancers. In addition, CD44 expression is closely linked with immune infiltration and immune suppressive features in pancreatic, colon adenocarcinoma and stomach cancer. High CD44 expression was significantly correlated with the expression of drug resistance-, EMT- and metastasis- linked genes. Tumors expressing high CD44 have higher mutation burden and afflict older patients than tumors expressing low CD44. Cell lines expressing high CD44 are more resistant to anti-cancer drugs compared to those expressing low CD44. Protein-protein interaction investigations and functional enrichment analysis showed that CD44 interacts with gene products related to cell-substrate adhesion, migration, platelet activation, and cellular response to stress. KEGG pathway analysis revealed that these genes play key roles in biological adhesion, cell component organization, locomotion, G-α-signaling and the response to stimulus. Overall, this investigation reveals that CD44 play significant roles in tumorigenesis, can be used as a prognostic biomarker in several cancers and can be therapeutically targeted in cancer therapy.

In roll-to-roll (R2R) processing, uniformity of the web is a crucial factor that can guarantee high coating quality. To understand web defects due to thermal deformation, we analyzed the effects of web unevenness on the coating quality of an yttria-stabilized zirconia (YSZ) layer, a brittle electrolyte of solid oxide fuel cells (SOFCs). We used finite element analysis to analyze the thermal and mechanical deformations at different drying temperatures. A YSZ layer was also coated using R2R slot-die coating to observe effects of web unevenness on the coating quality. It was seen that web unevenness was generated by thermal deformation due the conduction and convection heat from the dryer. Owing to varying web unevenness with time, the YSZ layer developed cracks. At higher drying temperatures, more coating defects having larger widths were generated. Results indicated that web unevenness at the coating section led to coating defects, which could damage the SOFC and decrease its yield in the R2R process. From this study, we suggest that coating defects, generated by the web unevenness owing to the convection and conduction heat, should be considered for the high-volume production of brittle electrolytes using the R2R process.

Biofilms are communities of microorganisms that can colonize biotic and abiotic surfaces playing a significant role in the persistence of bacterial infection and antibiotic resistance. About 65% and 80% of microbial and chronic infections are produced by biofilm formation. The increase in infections by multi-resistant bacteria draws attention to the discovery of new drugs based on natural inhibitory molecules. The inhibition of diguanylate cyclases (DGCs), the enzyme implicated in the synthesis of the second messenger, cyclic diguanylate (c-di-GMP), involved the biofilm formation, represents a potential method for preventing the biofilm development. It has been extensively studied using PleD protein as a model of DGC for in silico studies as virtual screening and as a model for in vitro studies in biofilms formation. In the present study 224205 molecules from natural products database, ZINC15 has been evaluated through molecular docking and molecular dynamic simulation, our result suggests trans-Aconitic acid (TAA) as a possible starting point for hit-to-lead methodologies to obtain new molecules capable of inhibiting the PleD protein and hence blocking the biofilm formation.

The work is devoted to the investigation of virus quasispecies evolution and diversification due to mutations, competition for host cells, and cross-reactive immune responses. The model consists of a nonlocal reaction-diffusion equation for the virus density depending on the genotype considered as a continuous variable and on time. This equation contains two integral terms corresponding to the nonlocal effects of virus interaction with host cells and with immune cells. In the model, a virus strain is represented by a localized solution concentrated around some given genotype. Emergence of new strains corresponds to a periodic wave propagating in the space of genotypes. The conditions of appearance of such waves and their dynamics are described.

Flood is identified as one of the major disasters in the world; it destroys both human and properties across the world, where lives are lost, properties, public infrastructure, farmlands and agricultural produce with farm crops carted away as a result of flood disaster. Studies revealed that the flood in itself is not the danger, but the level of human vulnerability to flooding disaster risk, which enhances its destructive capabilities. However, based on the challenges poses by flood disaster risk, this research identifies Ala river in Akure as a potential cause of flood, considering its location and other human activities around the river. Therefore, the research used Ala-river a case study to identify and mapped out areas susceptible to flood disaster risk. The research made use of both literature review and conducted goe-data gathering with the application GIS-computer database to retrieve georeferencing relevant data from the fieldwork in the study area of Ala-river basin to mapped out locations vulnerable to achieve the research aim. The research adopted a Geo-mapping of the vulnerable area to Ala-River basin using arc-GIS tool in combination with other software such as IKONAS and OLI (Operation Land Imager) for the production of the study area imagery, ER-ITERIM was used for the collection of rainfall data and FAO was applied for digital soil mapping. These applications produced; the land use/land cover map, digital elevation map, buffer map using 30 meters setback, annual rainfall map, soil types map, vulnerability map and soil textural table for the study area. Analysis of the produced and generated maps shows 316 buildings vulnerability to flood disaster risk; the soil texture and types, and alternative use to which the soil types can be useful. The research recommends that demolition of the identified 316 buildings prone to flood disaster and compliance of building construction to 30 meters setback by developers. Others are the conversion of the future land setback for urban agricultural purposes and preservation of water retention areas for agricultural activities during the dry season among others. The study concludes that relevant government agencies in the State and in particular in Akure South Local Government should ensure prompt compliance and implementation of the recommendations to avoid potential flood disaster risks.

A significant part of the literature on innovative practice in medicine relates to seizing opportunities and curbing harms for patients in desperate situations. Unfortunately, the term innovation has multiple meanings and a rich rhetorical flourish that adds confusion and misunderstanding to an already difficult debate. This paper aims to enhance the current definition of innovative practice for medicine. First, we replace the term innovation with the more literal of new non-validated practice. To identify this meaning, we analyse the traditional research ethics’ distinction between research, validated practice, and innovation in the Belmont Report. Second, we propose the following explicit definition of new non-validated practice: the first or recent use of diagnostic, therapeutic or preventive interventions that introduce a significant change, with an insufficient level of evidence of safety or efficacy for regular healthcare, and with the main aim to benefit individual patients. This definition is a promising conceptual tool to inform empirical research, ethicists, and the harmonization of its regulation and legislation (e.g. right-to-try laws).

Alpine forest gaps can distribute snowfall, solar radiation and rainfall, thus inducing a heterogeneous hydrothermal microenvironment between the inside and outside areas of forest gaps. Additionally, the characteristics of the heterogeneous microenvironment could vary greatly across the gap location properties during winter and the growing season. To determine the response of total phenol loss (TPL) from the litter to alpine forest gap disturbance during decomposition, we conducted a field litterbag experiment within a representative fir (Abies faxoniana Rehd.) forest based on the gap location properties. The TPL and abundances of fungi and bacteria from two typical shrub species (willow, Salix paraplesia Schneid., and bamboo, Fargesia nitida (Mitford) Keng f.) were measured during the following periods over two years: snow formation (SF), snow cover (SC) snow melting (ST), the early growing season (EG) and the later growing season (LG). At the end of the study, we found that the snow cover depth, frequencies of the freeze-thaw cycle and the fungal copy g-1 to bacterial copy g-1 ratio had significant effects on the litter TPL. The abundances of fungi and bacteria decreased from the gap center to the closed canopy during the two SF, SC, ST and LG periods and reversed during the two EG periods. The TPL closely followed the same trend as the microbial abundance during the first year of incubation. In addition, both species had larger TPLs in the gap center during the first winter, first year and entire two years. These findings suggest that alpine forest gap formation accelerates litter TPL and plays a dual role during specific critical periods by distributing abiotic and biotic factors directly and indirectly. In conclusion, reduced snow cover depth and duration during winter warming under current climate change scenarios or as gaps vanish may slow litter TPL in alpine biomes.

Genetic testing has expanded out of the research laboratory into medical practice and the direct-to-consumer market, and rapid analysis of the resulting genotype data can now have significant impact. We present a method for summarizing personal genotypes as ‘genotype fingerprints’ that meet these needs. Genotype fingerprints can be derived from any single nucleotide polymorphism (SNP)-based assay, and remain comparable as chip designs evolve to higher marker densities. We demonstrate that they support distinguishing types of relationships among closely related individuals and closely related individuals from individuals from the same background population, as well as high-throughput identification of identical genotypes, individuals in known background populations, and de novo separation of subpopulations within a large cohort through extremely rapid comparisons. While fingerprints do not preserve anonymity, they provide a useful degree of privacy by summarizing a genotype in a way that prevents reconstruction of individual marker states. Genotype fingerprints are therefore well-suited as a format for public aggregation of genetic information to support ancestry and relatedness determination without revealing personal health risk status.

Viruses can infect a cell via one or both routes viz. cell-to-cell (c-c) or cell-free (c-f) . Pathogenesis studies of various viruses, including HIV, have shown that c-c transmission yields a significantly higher infection magnitude than the c-f route. Expectedly, potent antibodies inhibited c-f infection more efficiently than with c-cell transmission. To achieve a one-step, synchronous infection cycle that provides amplified infection, we have studied a consistent and efficient c-c HIV infection model since 1992. H9 cells persistently infected with HTLV-IIIB (H3B cells) and uninfected target CD4+ lymphocyte line (HuT78) were mixed in a ratio of 1:4 respectively. We have recently used this model to produce HIV designer antigens that have been shown to elicit monoclonal as well as polyclonal specific antibodies against novel epitopes that are formed post virus-cell engagement, but prior to fusion. The model can be extended for HIV neutralizing antibody assays or drug inhibitors against high multiplicity of infection.

In this study, the resource blocks (RB) are allocated to user equipment (UE) according to the evolutional algorithms for long term evolution (LTE) systems. Particle Swarm Optimization (PSO) algorithm is one of the evolutionary algorithms, based on the imitation of a flock of birds foraging behavior through learning and grouping the best experience. In previous work, the Simple Particle Swarm Optimization (SPSO) algorithm was proposed for RB allocation to enhance the throughput of Device-to-Device (D2D) communications and improve the system capacity performance. In simulation results, with less population size of M = 10, the SPSO can perform quickly convergence to sub-optimal solution in the 100^th generation and obtained sub-optimum performance with more 2 UEs than the Rand method. Genetic algorithm (GA) is one of the evolutionary algorithms, based on Darwinian models of natural selection and evolution. Therefore, we further proposed a Refined PSO (RPSO) and a novel GA to enhance the throughput of UEs and to improve the system capacity performance. Simulation results show that the proposed GA with 100 populations, in 200 generations can converge to suboptimal solutions. Therefore, with comparing with the SPSO algorithm the proposed GA and RPSO can improve system capacity performance with 1.8 and 0.4 UEs, respectively.

This paper presents a complete control strategy of the active return-to-center (RTC) control for electric power steering (EPS) systems. We first establish the mathematical model of the EPS system and analyze the source and influence of the self-aligning torque (SAT). Second, based on the feedback signals of steering column torque and steering wheel angle, we give the trigger conditions of a state switch between the steering assist state and the RTC state. In order to avoid the sudden change of the output torque for the driving motor when the state switches frequently between the steering assist state and the RTC state, we design an undisturbed state switching logic algorithm. This state switching logic algorithm ensures that the output value of the RTC controller is set to an initial value and increases in given steps up to a maximum value after entering the RTC state, and the output value of the RTC controller will reduce in given steps down to zero when exiting the RTC state. This therefore ensures smooth switch control between the two states and improves the driver’s steering feeling. Third, we design the RTC controller, which depends upon the feedback signals of the steering wheel angle and the angular velocity. In addition, the controller increases the auxiliary control function of the RTC torque based on vehicle speed. The experimental results show that the active RTC control method does not affect the basic assist characteristics, which effectively reduces the residual angle of the steering wheel at low vehicle speed and improves the RTC performance of the vehicle.

One of the most prevalent and deadly types of cancer is breast cancer. The value and effectiveness of the current pharmacological therapy are, however, constrained. Using computational methods and publicly available data, the current study set out to identify the genes and molecular pathways linked to breast cancer. It also looked into potential treatments for the disease that would target these molecular processes. In this study, we mined genes that were strongly associated with breast cancer using text mining and GeneCodis. Using STRING and Cytoscape, protein-protein interaction (PPI) study was carried out. Candidate medications were then derived based on the drug-gene interaction study of the final genes. 2,658 genes linked to breast cancer were found by our investigation using text mining searches. Out of which 166 genes have been taken which are relevant to breast cancer. Ten genes representing ten pathways—which a total of ten proteins could target—were found by gene enrichment analysis. We have taken Holy Basil as our lead as it contains various bioactive compounds such as flavonoids, terpenoids, and phenolics, which have shown antioxidant, anti-inflammatory, and anticancer properties. For this analysis we choose the molecular docking technique to check the effects of different chemical constituents of Holy Tulsi on breast cancer targeted protein and compare their results. We’ve performed the molecular docking in between chemical constituents of Holy Basil and the targeted proteins and determined the binding affinity with the help of PyRx and BIOVIA Discovery studio software. Anti-mitotic activity of Pisum sativum using tulsi extract to check the cytotoxicity effect was done. To determine the toxicity level of the extract on rat liver was performed in the end. In conclusion, investigating candidate medications that target the genes/pathways relevant to breast cancer in order to uncover possible treatments may be accomplished through drug discovery employing in silico text mining and pathway analysis technologies along with the wet lab experimentation with plants and preclinicals.

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e. feature engineering, model selection, etc), principles (i.e. bias-variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, output interpretability, etc), models (i.e. neural networks, regression models, etc), methods (i.e. Cross-Validation, data augmentation, etc), metrics (i.e. Mean Squared Error, F1-score, etc) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community over complete and rigorous machine learning pipelines and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers due to brevity, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are not AI experts.

The integration of connected autonomous vehicles into the transportation system introduces significant enhancements in driving experience and convenience. Yet, it simultaneously raises important concerns regarding the security and privacy of passenger data. As individuals increasingly depend on these connected vehicles, particularly rental cars with advanced infotainment systems, safeguarding their personal information becomes a paramount imperative, presenting significant challenges that must be addressed to maintain user trust and comply with privacy regulations. This paper investigates risks associated with personal information stored in connected vehicle technology, emphasizing the importance of robust security and privacy practices. In the advent of cyber threats and the need for data protection, we examine a risk management framework (RMF) as suggested by NIST, which aims to address these quintessential concerns preemptively. Our research moves beyond the limitations of manual safeguarding methods, supporting the necessity for an advanced automated technical solution. To address these issues, we introduce and meticulously assess the efficacy of “Vehicle Inactive Profile Removal” (VIPR), an innovative technical solution conceived to actively eliminate the risks and potential oversights that stem from the prevalent tendency of renters to leave personal data unerased in the infotainment systems of rented connected vehicles. We provide a thorough evaluation of VIPR through various scenarios, including vehicle return to a rental depot, subsequent rentals, and ridesharing contexts. Our proof of concept includes an array of experiments to demonstrate how VIPR proficiently and autonomously removes previous renters’ “Inactive” profiles from a simulated infotainment system. The results highlight how VIPR constitutes a critical step towards enhancing the privacy and security of personal data, thereby promoting a safer, more responsible use of connected vehicle technology in society.

Alzheimer’s is a degenerative brain condition brought on by intricate brain changes after cell injury. The prevalence of Alzheimer’s disease is highest in those over 65. Presently, AD is detected by manual examination of a patient’s Magnetic Resonance Imaging (MRI) scan and neuropsychological assessments. Due to its subpar accuracy and performance, solutions based on artificial intelligence (AI) have not been made more widely available. This paper proposes a deep Convolutional Neural Network (CNN) with the pre-trained MobileNet-V2 architecture as the model’s base for feature extraction and reducing the parameter size and training time. The proposed model accurately classifies various early stages of AD. The proposed approach visualizes the class activation maps in the form of a heat map on brain MRI scans via the Grad-CAM algorithm that lifts the black-box nature of the deep model. To handle the imbalance problem of the AD data set acquired from Kaggle, the oversampling algorithm SMOTE interpolates new images to even the class samples. The proposed multi-class classification deep model is named Bio-AD and evaluated using different quality metrics. The Bio-AD model has the following values for evaluation metrics: 97.92%, 99.87%, 97.87%, 98%, 98%, and 0.0646 for accuracy, Area Under the Curve (AUC), F1-score, Precision, Recall, and loss respectively. The proposed Bio-AD model is compared with DenseNet-169, VGG-19, and InceptionResNet-V2 using different quality metrics and outperformed in comparison with all other models using the AD data set.

In the era of cloud computing, guaranteeing the safety and effectiveness of data management is of utmost importance. This investigation presents a novel approach that amalgamates sharding concept, encryption, zero-knowledge proofs (zkp), and blockchain technology for secure data retrieval and data access control to improve data security, efficiency in cloud storage and migration. Further we utilize user-specific digital wallets for secure encryption keys in order to encrypt the file before storing into the cloud. As Large files ( greater than 50 MB) or Big data file ( grater than 1 TB) computational complexity is more we leverage on sharding concept to enhance both space and time complexity in cloud storage, hence the large files are divided into shards and stored in different database servers. We also employed blockchain smart contract to enhance secure retrieval of the file and also a secure access method which ensures the privacy of the user. The zk-snark protocol is utilized to ensure the safe transfer of data between different cloud services. By utilizing this approach, data privacy is preserved, as only the proof of the data’s authenticity is shared with the verifier at the destination cloud, rather than the actual data itself. The suggested method tackles important concerns related to data protection, privacy, and efficient resource utilization in cloud computing settings by ensuring it meets all the cloud policies require to store data. As the environment maintains privacy of the user data and by not storing the raw data of the user anywhere, the entire environment is setup as a Zero trust model.

Artificial intelligence (AI) techniques have grown rapidly in recent years in the context of computing with smart mobile phones that typically allows the devices to function in an intelligent manner. Popular AI techniques include machine learning and deep learning methods, natural language processing, as well as knowledge representation and expert systems, can be used to make the target mobile applications intelligent and more effective. In this paper, we present a comprehensive view on mobile data science and intelligent apps in terms of concepts and AI-based modeling that can be used to design and develop intelligent mobile applications for the betterment of human life in their diverse day-to-day situation. This study also includes the concepts and insights of various AI-powered intelligent apps in several application domains, ranging from personalized recommendation to healthcare services, including COVID-19 pandemic management in recent days. Finally, we highlight several research issues and future directions relevant to our analysis in the area of mobile data science and intelligent apps. Overall, this paper aims to serve as a reference point and guidelines for the mobile application developers as well as the researchers in this domain, particularly from the technical point of view.

This study explored market actors’ perspectives on data sharing within Poland’s food passports pilot, which tested the feasibility of a digital system that provides reliable and comprehensive information on the origin, journey, and quality of agri-food products. Using thematic analysis, we identified factors influencing stakeholders’ willingness and motivations to share data. Our findings highlight the necessity of a clear value proposition for all actors within the production and distribution chain to invest resources and time in additional data exchange systems. For farmers, reducing burdensome reporting procedures and providing direct financial incentives were key motivators. Agri-food processing, transport and packaging companies viewed data collaboration as a practical tool to ensure high-quality raw materials and promote premium-priced food. Appropriate data management policies were critical for all stakeholders. While sustainability was recognized as important, opportunities for collaboration going beyond economic considerations were not widely explored. Additionally, concerns about data interpretation emerged as a significant issue. These findings suggest the need for data-sharing strategies that better align economic benefits with broader sustainability goals. Further research is also needed to examine how concerns about potential data misinterpretation limit stakeholders’ willingness to engage in data sharing initiatives.