With a view to sustainable development and circular economy, this work focused on the possibility to valorize a secondary waste stream of recycled carbon fiber (rCF) to produce a 3D printing usable material with PA6,6 polymer matrix. The reinforcing fibers implemented in the present research are the result of a double recovery action: starting with pyrolysis from which long fibers are obtained, used to produce non-woven fabrics and, subsequently, fiber agglomerate wastes obtained from this last process are ground in a ball mill. The effect of a different amount of reinforcement at 5% and 10% by weight on the mechanical properties of 3D printed thermoplastic composites was investigated. Although the recycled fraction was successfully integrated in the production of filaments for 3D printing and therefore in the production of specimens via Fused Deposition Modeling technique, the results showed that fibers did not improve the mechanical properties as expected, due to an unsuitable average size distribution and the presence of a predominant dusty fraction ascribed to the non-optimized ball milling process. PA6,6 + 10 wt.% rCF composites exhibited a tensile strength of 59.53 MPa and a tensile modulus of 2.24 GPa, which correspond to an improvement in mechanical behavior of 21 5 % and 5 21 % compared to the neat PA6,6 specimens, respectively. The printed composite specimens loaded with the lowest content of rCF provided the greatest improvement in strength (+ 9% over the neat sample). Then, a prediction of the “optimum” critical length of carbon fibers was proposed that could be used for future optimizations of the recycled fiber processing.

The global demand for energy has been steadily increasing due to population growth, urbanization, and industrialization. Numerous researchers worldwide are striving to create precise forecasting models for predicting energy consumption to manage supply and demand effectively. In this research, a time-series forecasting model based on multivariate multilayered long short-term memory (LSTM) is proposed for forecasting energy consumption and tested using data obtained from commercial buildings in Melbourne, Australia: the Advanced Technologies Center, Advanced Manufacturing and Design Center, and Knox Innovation, Opportunity, and Sustainability Center buildings. This research specifically identifies the best forecasting method for subtropical conditions and evaluates its performance by comparing it with the most used methods at present, including LSTM, bidirectional LSTM, and linear regression. The proposed multivariate multilayered LSTM model was assessed by comparing mean average error (MAE), root-mean-square error (RMSE), and mean absolute percentage error (MAPE) values with and without labeled time. Results indicate that the proposed model exhibits optimal performance with improved precision and accuracy. Specifically, the proposed LSTM model achieved a decrease in MAE by 30%, RMSE by 25%, and MAPE by 20% compared to the LSTM method. Moreover, it outperformed the bidirectional LSTM method with a reduction in MAE by 10%, RMSE by 20%, and MAPE by 18%. Furthermore, the proposed model surpassed linear regression with a decrease in MAE by 2%, RMSE by 7%, and MAPE by 10%. These findings highlight the significant performance increase achieved by the proposed multivariate multilayered LSTM model in energy consumption forecasting.

Many studies link changes in avian phenology in Europe to the North Atlantic Oscillation (NAO), as a proxy of conditions at western Europe. But effects of climate variation in other regions of Eu-rope on phenology of short-distance migrants with wide non-breeding grounds remain unclear. We determined the combined influence of large-scale climate indices, NAO, the Mediterranean Oscillation Index (MOI), and the Scandinavian Pattern (SCAND), during the preceding year on spring migration timing of European Wren at the southern Baltic coast during 1982–2021. We modelled the effects of these climate variables on the entire passage and subsequent percentiles of Wren’s passage at Bukowo-Kopań and Hel ringing stations. The start and median of migration shifted earlier at Hel, but the end of passage shifted later at both stations over 1982–2021. In the effect, the duration of passage at Hel extended by 7.6 days. Early passage at Hel was related with high MOI1 in spring and in preceding autumn. Spring passage at Bukowo-Kopań was late after high NAO in the previous breeding season, and high winter and spring NAO. At both stations late spring passage occurred after high SCAND in previous summer. Early beginning or median of passage at our stations followed high local temperatures. We conclude that phenology of Wren’s spring migration at the Baltic coast was shaped by conditions that different populations encounter at wintering quarters in western Europe, where NAO operates, and in the south-eastern Europe, where the MOI1 operates, in combination with conditions in Scandinavia during previous breed-ing season. We showed that climate variability in different parts of the migrants’ range has com-bined carry-over effects on in migrant’s phenology in Europe.

The passenger prediction flow is very significant to transportation sustainability. This is due to some chaos of traffic jams encountered by the road users during their movement to the offices, schools, or markets at earlier of the days and during closing periods. This problem is peculiar to the transportation system of the Federal University of Technology Minna, Nigeria. However, the prevailing technique of passenger flow estimation is non-parametric which depends on the fixed planning and is easily affected by noise. In this research, we proposed the development of a hybrid intelligent passenger frequency prediction model using the Auto-Regressive Integrated Moving Average (ARIMA) linear model, Convolutional Neural Network (CNN), and Kalman Filter Algorithm (KFA). The passengers’ frequency of arrival at the bus terminals is obtained and enumerated through the closed-circuit television (CCTV) and demonstrated using the Markovian Queueing Systems Model (MQSM). The ARIMA model was used for learning and prediction and compared the result with the combined techniques of using CNN-KFA. The autocorrelation coefficient functions (ACF) and partial autocorrelation coefficient functions (PACF) are used to examine the stationary data with different features. The performance of the models was analyzed and evaluated in describing the short-term passenger flow frequency at each terminal using the Mean Absolute Percentage Error (MAPE) and Mean Squared Error (MSE) values. The CNN-Kalman-filter model was fitted into the short-term series and the MAPE values are below 10%. The Mean Square Error (MSE) shows that the CNN-Kalman Filter model has the overall best performance with 83.33% of the time better than the ARIMA model and provides high accuracy in forecasting.

The electric power distribution utility is responsible for providing energy to consumers in a continuous and stable way, failures in the electrical power system reduce the reliability indexes of the grid, directly harming its performance. For this reason, there is a need for failure prediction to reestablish power in the shortest possible time. Considering an evaluation of the number of failures over time, this paper proposes to perform a failure prediction during the first year of the pandemic in Brazil (2020) to verify the feasibility of using time series forecasting models for fault prediction. The Long Short-Term Memory (LSTM) model will be evaluated to obtain a forecast result that can be used by the electric power utility to organize the maintenance teams. The Wavelet transform shows to be promising in improving the predictive ability of the LSTM, making the Wavelet LSTM model suitable for the study at hand. The results show that the proposed approach has better results regarding the evaluation of the error in prediction and has robustness when a statistical analysis is performed.

Among the thermophysical properties, the surface / interfacial tension, viscosity and density / molar volume of liquid alloys are the key properties for the modelling of microstructural evolution during solidification. Therefore, only reliable input data can yield accurate predictions preventing the error propagation in numerical simulations of solidification related processes. Due to experimental difficulties related to reactivity of metallic melts at high temperatures, the measured data are often unreliable or even lacking. The application of containerless processing techniques either leads to a significant improvement of the accuracy or makes the measurement possible at all. On the other side, accurate model predicted property values could be used to compensate the missing data; otherwise, the experimental data are useful for the validation of theoretical models. The choice of models is particularly important for the surface, transport and structural properties of liquid alloys representing the two limiting cases of mixing, i.e. ordered and phase separating alloy systems. To this aim, the thermophysical properties of the Fe-Si and Cu-Pb systems were analysed and the connections with the peculiarities of their mixing behaviours are highlighted.

We investigated the role of the human medio-temporal complex (hMT+) in the memory encoding and storage of a sequence of four coherently moving RDKs by applying repetitive transcranial magnetic stimulation (rTMS) during an early or late phase of the retention interval. Moreover, in a second experiment we also tested whether disrupting the functional integrity of hMT+ during the early phase impaired the precision of the encoded motion directions. Overall, results showed that both recognition accuracy and precision were worse in middle serial positions, suggesting the occurrence of primacy and recency effects. We found that rTMS delivered during the early (but not the late) phase of the retention interval was able to impair not only recognition of RDKs, but also the precision of the retained motion direction. However, such impairment occurred only for RDKs presented in middle positions along the presented sequence, where performance was already closer to chance level. Altogether these findings suggest an involvement of hMT+ in the memory encoding of visual motion direction. Given that both position sequence and rTMS modulated not only recognition but also precision of the stored information, these findings are in support of a model of visual short-term memory with a variable resolution of each stored item, consistent with the assigned amount of memory resources, and that such item-specific memory resolution is supported by the functional integrity of area hMT+.

Energy harvesting from wind turbines has been explored by researchers for more than a century from conventional turbines up to the latest bladeless turbines. Amongst these bladeless turbines, vortex bladeless wind turbine (VBT) harvests energy from oscillation of a turbine body. Due to the novelty of this science and the widespread researches around the world, one of the most important issues is to optimize and predict produced power. To enhance the produced output electrical power of VBT, the fluid-solid interactions (FSI) were analyzed to collect a dataset for predicting procedure. Long short-term memory (LSTM) method has been used to predict the produced power of VBT from the collected data. The reason of choosing LSTM from various artificial neural network methods is that the parameters of VBT study are all time- dependent and the LSTM is one of the most accruable algorithms for predicting time series data. In order to find the relationship between the parameter and the variables used in this research, a correlation matrix was presented. According to the value of 0.3 for the root mean square error (RMSE), a comparative analysis between the simulation results and its prediction shows that the LSTM method is very accurate for these types of research. Furthermore, the LSTM method has significantly reduced the computation time so that the prediction time of desired values has been reduced from an average of 2 and a half hours to two minutes. Also, one of the most important achievements of this study is to suggest a mathematical relation of VBT output power which helps to extend it in a different size of VBT with a high range of parameter variations.

During the night between 9 and 10 September 2017, multiple flash floods associated to a heavy-precipitation event affected the town of Livorno, located in Tuscany, Italy. Accumulated precipitation exceeding 200 mm in two hours, associated with a return period higher than 200 years, caused all the largest streams of the Livorno municipality to flood several areas of the town. We used the limited-area Weather Research and Forecasting (WRF) model, in a convection-permitting setup, to reconstruct the extreme event leading to the flash floods. We evaluated possible forecasting improvements emerging from the assimilation of local ground stations and X- and S-band radar data into the WRF, using the configuration operational at the meteorological center of Tuscany region (LaMMA) at the time of the event. Simulations were verified against weather station observations, through an innovative method aimed at disentangling the positioning and intensity errors of precipitation forecasts. By providing more accurate descriptions of the low-level flow and a better assessment of the atmospheric water vapour, the results demonstrate that assimilating radar data improved the quantitative precipitation forecasts.

Accurate forecasts of ocean waves energy can not only reduce costs for investment but it is also essential for management and operation of electrical power. This paper presents an innovative approach based on the Long Short Term Memory (LSTM) to predict the power generation of an economical wave energy converter named “Searaser”. The data for analyzing is provided by collecting the experimental data from another study and the exerted data from numerical simulation of searaser. The simulation is done with Flow-3D software which has high capability in analyzing the fluid solid interactions. The lack of relation between wind speed and output power in previous studies needs to be investigated in this field. Therefore, in this study the wind speed and output power are related with a LSTM method. Moreover, it can be inferred that the LSTM Network is able to predict power in terms of height more accurately and faster than the numerical solution in a field of predicting. The network output figures show a great agreement and the root mean square is 0.49 in the mean value related to the accuracy of LSTM method. Furthermore, the mathematical relation between the generated power and wave height was introduced by curve fitting of the power function to the result of LSTM method.

Climate change has become the greatest threat to the survival of world and its ecosystem. With the irreversible impact on the ecosystem, problems like rise in sea level, food-insecurity, natural resources scarcity, seasonal disorders have increased over the past few years. Among these problems, the issue of water scarcity due to the lack of water resources and global warming has plagued several nations. Owing to the rising concerns over water scarcity United Nations (UN) has acknowledged water as a primary resource to the development of societies under the ‘Water Goal’ of the sustainable development goals. As the changing climate and intermittent availability of water resources pose major challenges to forecast demand, especially in countries like the United Arab Emirates (UAE) which has one of the highest per capita residential water consumption rates in the world. Therefore, the aim of this study is to propose an accurate water demand forecasting technique that incorporates all significant factors to predict the future water demands of the UAE. The forecasting model used is the Long Short Term Memory (LSTM), with the factors considered are mean temperature, mean rainfall, relative humidity, Gross Domestic Product (GDP), Consumer Price Index (CPI) and population growth. The LSTM model predicts the water demand forecasting in the UAE showing that the future demand will decrease from 1821 million m3 in 2018 to 1809.9 million m3 in 2027.

Detection of early stage corrosion on slender steel members is crucial for preventing buckling failures of steel structures. An active photoacoustic fiber optic sensors (FOS) system has been reported for early stage steel corrosion detection of steel plates and rebars using surface ultrasonic waves. The objective of this paper is to investigate the surface corrosion/rust detection problem on steel rods using numerically simulated surface ultrasonic waves. The finite element method (FEM) is applied in simulating the propagation of ultrasonic waves on steel rod models. Transmission mode of damage detection is adopted, in which one source (transmitter) and one sensor (receiver) are considered. In this research, radial displacements at the receiver were simulated and analyzed by short-time Fourier transform (STFT) for detecting, locating, and quantifying a surface rust located between the transmitter and the receiver. From our time domain and frequency domain analyses, it is found that the presence, location, and dimensions (length, width, and depth) of surface rust can be estimated by ultrasonic waves propagating through the surface rust.

Smart grids require flexible data driven forecasting methods. We propose clustering tools for bottom-up short-term load forecasting. We focus on individual consumption data analysis which plays a major role for energy management and electricity load forecasting. The two first sections are dedicated to the industrial context and a review of individual electrical data analysis. We are interested in hierarchical time-series for bottom-up forecasting. The idea is to disaggregate the signal in such a way that the sum of disaggregated forecasts improves the direct prediction. The 3-steps strategy defines numerous super-consumers by curve clustering, builds a hierarchy of partitions and selects the best one minimizing a forecast criterion. Using a nonparametric model to handle forecasting, and wavelets to define various notions of similarity between load curves, this disaggregation strategy applied to French individual consumers leads to a gain of 16\% in forecast accuracy. We then explore the upscaling capacity of this strategy facing massive data and implement proposals using R, the free software environment for statistical computing. The proposed solutions to make the algorithm scalable combines data storage, parallel computing and double clustering step to define the super-consumers.

Deep learning has recently attracted much attention due to its excellent performance in processing audio, image, and video data. However, few studies are devoted to the field of automatic modulation classification (AMC). It is one of the most well-known research topics in communication signal recognition, which remains challenging for traditional methods due to the complex disturbance from other sources. This paper proposes a heterogeneous deep model fusion (HDMF) method to solve the problem in a unified framework. The contributions include: 1) The convolutional neural network (CNN) and long short-term memory (LSTM) are combined by two different ways without prior knowledge involved; 2) A large database, including eleven types of single-carrier modulation signals with various noises as well as a fading channel, is collected with various signal-to-noise ratios (SNRs) based on a real geographical environment; and 3) Experimental results demonstrate that HDMF is super capable of copping with the AMC problem, and achieves much better performance when compared with the independent network. The source code and the database will be publically available.

Supplier diversity has emerged as a critical strategy for enhancing e-commerce operations by fostering inclusivity and innovation within supply chains. This qualitative research explores the role of supplier diversity in e-commerce, examining its impact on organizational strategies, competitive advantage, and stakeholder perceptions. Through semi-structured interviews with procurement managers, diversity officers, and supply chain executives from diverse e-commerce platforms, this study identifies key themes related to the benefits, challenges, and strategic implications of supplier diversity initiatives. Findings indicate that supplier diversity significantly enhances innovation and creativity within supply chains by integrating diverse perspectives and expertise. This diversity not only enriches product development and market responsiveness but also strengthens corporate reputation and brand equity, demonstrating organizational commitment to ethical business practices and community engagement. However, the study reveals persistent challenges, including financial barriers, systemic biases, and scalability issues, which hinder the effective implementation and scalability of supplier diversity programs. Effective supplier relationship management emerges as critical for maximizing the benefits of supplier diversity, fostering trust, collaboration, and long-term partnerships with diverse suppliers. Looking forward, the future of supplier diversity lies in digital transformation, globalization of supplier networks, and integration of sustainable sourcing practices to enhance transparency, efficiency, and resilience in supply chain operations. This study contributes to the growing literature on supplier diversity by providing empirical insights and practical implications for organizations aiming to leverage diversity as a strategic asset in e-commerce and global supply chain management.

This study investigates how organizations adapt their procurement practices in response to supply chain disruptions, aiming to enhance resilience and ensure operational continuity. Through qualitative research involving interviews with procurement professionals and industry experts, the study identifies key adaptive strategies employed by organizations, including supplier diversification, enhanced inventory management, digital transformation, supplier collaboration, and contingency planning. These strategies are explored in depth, highlighting their implementation challenges and the outcomes achieved. Despite facing obstacles such as financial constraints, technological barriers, and supplier resistance, organizations have demonstrated a proactive approach in leveraging these strategies to mitigate risks and improve supply chain resilience. The findings reveal that adaptive procurement strategies have led to significant outcomes, including strengthened supplier relationships, increased operational efficiency, better risk management, and competitive advantage. These outcomes underscore the strategic importance of agility, technological integration, collaborative partnerships, and effective leadership in responding to disruptions and maintaining competitiveness. The study also discusses implications for practice and policy, emphasizing the need for continued investment in technology, collaboration, and resilience-building initiatives across supply chains. Overall, this research contributes to the understanding of how organizations can adapt and innovate in the face of dynamic supply chain challenges, providing insights that can guide future research and inform strategic decision-making in procurement and supply chain management.

Supply chain flexibility plays a pivotal role in enabling organizations to adapt their marketing strategies to evolving consumer preferences in dynamic market environments. This qualitative study explores how supply chain flexibility dimensions—responsiveness, agility, resilience, and sustainability—impact marketing strategy adaptation. Through semi-structured interviews and document analysis, insights were gathered from industry practitioners across diverse sectors. Key findings highlight that responsive supply chains facilitate quick adjustments in production, distribution, and sourcing to meet changing consumer demands. Agility enables rapid reconfiguration of operations to capitalize on market opportunities and respond to disruptions effectively. Resilient supply chains mitigate risks and maintain continuity during crises, safeguarding customer satisfaction and brand reputation. Integrating sustainability practices not only meets regulatory standards but also aligns with consumer preferences for eco-friendly products, enhancing corporate social responsibility. Technological advancements such as AI, IoT, blockchain, and cloud computing enhance supply chain visibility, optimize decision-making, and support real-time responsiveness. Despite benefits, challenges like legacy systems, organizational silos, resistance to change, and resource constraints hinder effective implementation. Overcoming these barriers requires strategic leadership, cross-functional collaboration, and continuous investment in technology and talent. Embracing supply chain flexibility empowers organizations to navigate complexities, drive innovation, and sustain competitive advantage. By aligning supply chain capabilities with marketing strategies, companies can enhance market responsiveness, customer satisfaction, and long-term growth in today's dynamic business landscape

Food security is the cornerstone of national security, and exploring the resilience of the grain industry chain is particularly important under the current complex and changing external environment. The study is to evaluate the grain industry chain resilience and identify its influencing factors. Based on the panel data of 30 provinces (cities) in China from 2011 to 2022, this paper adopted Partial Least Squares structural equation modeling method to carry out comprehensive evaluation, applied Dagum Gini coefficient to analyze spatial differences, and used geo-detectors to identify the influencing factors. The results showed that (1) from an overall perspective, the resilience of China's grain industry chain showed an overall upward trend, and each region had been greatly improved; (2) from the perspective of spatial differences, the overall spatial variability of China's grain industry chain is relatively small, and the gap mainly originates from inter-regional differences; (3) from the perspective of influencing factors, the level of grain foreign trade, regional market size and agricultural innovation level were important factors. In order to enhance the resilience of China's grain industry chain, based on the heterogeneous characteristics, the coordinated development of each region should be integrated, and the endogenous power should be given full play to enhance the resilience of the industry chain.

The thermal conditions of transitional (ranging from warm to cold) coldwater streams impact the ranges and resource availabilities for biota inhabiting these lotic systems. With ongoing climate change and increasing land modifications, thermal boundaries may shift, altering thermal transition zones and their biotic communities. The objective of this study was to investigate the condition of trout across three forks of the Whitewater River catchment and to investigate factors influencing fish community composition and distribution. Each fork was characterized into three separate sections: headwater (coolwater), middle (warmwater), and lower (coldwater). Springs were identified throughout each fork, with greatest concentrations in the lower sections of each fork. Using single-pass electrofishing, we sampled 61 sites across the three forks in the Whitewater River system (North = 21 sites, Middle = 19, South = 21), and catch statistics were used to calculate diversity, trout abundance, and trout condition. In general, diversity increased, and trout were healthier but less abundant in middle and headwater sections, whereas diversity decreased slightly, trout condition decreased, and trout abundance increased in lower reaches, with changes differing somewhat among forks. Canonical correlation analysis had strong significant correlations showing simpson diversity and condition increase going upstream with high non trout abundance and catch rates while trout catch rates and reach width decrease. The Whitewater River is a catchment exhibiting transitional temperature-pattern characteristics with generally low fish community diversity and trout conditions that range from thin, normal, and robust. Dominated by a changing landscape (agriculture) and intensifying climate change, we may begin to see stream temperatures increase along with species diversity. Understanding how spring temperature influences species composition and distribution can bring potential stressors to light increasing our understanding of thermal conditions and to help mitigate the negative impacts from land use and climate change.

This qualitative study explores the transformative role of digital technologies in enhancing supply chain efficiency and marketing effectiveness across diverse industries. The integration of Internet of Things (IoT), artificial intelligence (AI), blockchain, and advanced analytics has reshaped organizational practices, enabling real-time data collection, analysis, and decision-making in supply chain management (SCM) and marketing. Through semi-structured interviews with 25 professionals, including supply chain managers, marketing executives, and IT specialists, insights were gathered into the adoption, integration, and impact of digital technologies within organizational contexts. Key findings highlight IoT's contribution to enhancing supply chain visibility, predictive maintenance, and operational efficiency through continuous monitoring and data-driven insights. AI technologies support demand forecasting, inventory optimization, and personalized marketing strategies, improving customer engagement and satisfaction. Blockchain enhances supply chain transparency, traceability, and security, reducing risks associated with fraud and ensuring compliance with regulatory standards. Advanced analytics provide organizations with actionable insights into consumer behavior and market trends, guiding strategic decision-making and optimizing marketing campaigns. Despite these benefits, organizations face challenges such as technological complexity, integration issues, data privacy concerns, and organizational resistance to change. Strategic planning, leadership support, and investment in digital infrastructure are essential for overcoming these challenges and maximizing the potential of digital technologies. Future research directions include exploring sustainability initiatives in digital SCM, advancing AI-driven analytics, and understanding digital transformation in emerging markets.

Digital transformation is revolutionizing supply chain management, profoundly influencing marketing effectiveness across industries. This qualitative study explores the impact of digital transformation on supply chains and its implications for marketing strategies. Through in-depth interviews, case studies, and document analysis, the research elucidates how digital technologies such as IoT, blockchain, AI, and advanced analytics are reshaping supply chain dynamics. Key findings highlight enhanced supply chain visibility, improved decision-making capabilities, and strengthened collaboration among supply chain partners. These technological advancements empower organizations to optimize inventory management, anticipate market trends, and deliver personalized customer experiences, thereby enhancing operational efficiency and customer satisfaction. Furthermore, the study underscores the role of digital transformation in promoting sustainability and ethical practices within supply chains. Technologies like blockchain facilitate transparent and traceable supply chains, supporting initiatives for responsible sourcing and environmental stewardship. Despite the transformative benefits, the study identifies challenges including significant investment requirements, integration complexities, and data security concerns. Strategic approaches to technology adoption, robust cybersecurity measures, and employee training are essential for overcoming these challenges and maximizing the benefits of digital transformation. Overall, this study contributes to understanding how digital transformation drives innovation in supply chain management and enhances marketing effectiveness. By embracing digital technologies and aligning supply chain strategies with marketing objectives, organizations can navigate competitive landscapes, meet evolving consumer expectations, and achieve sustainable growth in the digital era.

This study explores the critical role of supply chain management (SCM) in shaping marketing strategies in emerging markets, where rapid economic growth and dynamic consumer behavior present both challenges and opportunities. Utilizing a qualitative approach, the research synthesizes insights from industry professionals across various sectors to elucidate how effective SCM practices can enhance marketing outcomes. Findings reveal that flexibility in supply chain operations is indispensable for adapting to the volatile market conditions typical of emerging economies, enabling companies to respond swiftly to changes in consumer demand and market trends. Advanced technologies such as predictive analytics, artificial intelligence, and the Internet of Things are identified as key enablers, providing real-time insights that align supply chain processes with marketing objectives. The ability to customize products and services to local preferences, supported by agile supply chains, emerges as a crucial factor in gaining a competitive edge. Cost management and optimization through efficient supply chain practices allow for competitive pricing and effective promotions, essential in price-sensitive markets. The study also highlights the importance of managing regulatory compliance, mitigating risks, and enhancing customer experience through integrated supply chain strategies. Cultural considerations and local market knowledge are critical for aligning product features and marketing messages with consumer expectations. Additionally, sustainability is becoming increasingly relevant, with environmentally conscious supply chains enhancing brand image and supporting marketing strategies. The impact of e-commerce and the role of supplier relationships further underscore the need for cohesive SCM and marketing integration. This research provides a comprehensive framework for understanding how supply chain capabilities can be leveraged to achieve marketing success in emerging markets, offering practical insights for companies seeking to navigate these complex environments effectively.

In today's globalized economy, supply chain disruptions present significant challenges, impacting businesses' operational continuity and efficiency. This study delves into the ways businesses navigate these disruptions, with a particular emphasis on qualitative insights into risk management practices. The complexity and interconnectivity inherent in modern supply chains make them vulnerable to a broad spectrum of disruptions, ranging from natural disasters and geopolitical conflicts to technological failures and pandemics. Effective supply chain risk management requires a structured approach to identifying potential risks, evaluating their likelihood and potential impact, and formulating robust mitigation strategies. Employing a qualitative research methodology, this study gathers in-depth insights from semi-structured interviews with supply chain managers, industry experts, and executives. The findings underscore the necessity of proactive risk identification and comprehensive assessment processes. Advanced technologies, including artificial intelligence (AI), the Internet of Things (IoT), and blockchain, are highlighted as crucial tools for enhancing visibility and responsiveness within supply chains. Strategies such as diversifying suppliers and maintaining safety stock emerge as vital components of risk mitigation, ensuring supply continuity in the face of disruptions. Strong relationships with suppliers are pivotal, facilitating better information sharing and collaborative problem-solving. Leadership commitment to risk management and fostering a culture of resilience within organizations is also critical. Training programs and simulation exercises are identified as effective means of preparing employees to handle disruptions. Furthermore, adherence to regulatory compliance and a focus on sustainability are integral to maintaining long-term stability and reducing the risk of future disruptions.

Supply chain transparency and traceability have become increasingly important in today's globalized and interconnected business environment. This qualitative research explores the challenges and perspectives of industry practitioners regarding supply chain transparency and traceability. Drawing on semi-structured interviews with a diverse group of supply chain professionals, the study identifies key themes including difficulties in achieving visibility beyond immediate suppliers, data fragmentation and inconsistency, barriers to technology adoption, regulatory compliance, cultural and organizational factors, impacts on supplier relationships, and the influence of the COVID-19 pandemic and sustainability goals. The findings highlight the complex nature of these challenges and the need for collaborative, multi-stakeholder approaches to address them effectively. Despite the challenges, the study also reveals the potential benefits of transparency and traceability for enhancing supply chain resilience, sustainability, and stakeholder trust. Moving forward, companies must leverage technological innovations, establish clear communication channels with suppliers, navigate regulatory complexities, and foster a culture of transparency and accountability within their organizations. Future research should focus on practical strategies for implementing transparency and traceability initiatives, as well as evaluating their impact on supply chain performance and sustainability outcomes.

This study explores the multifaceted role of culture in supply chain collaboration, focusing on how cultural differences shape communication, trust-building, negotiation, conflict resolution, risk management, and ethical standards. Utilizing a qualitative methodology, semi-structured interviews were conducted with 25 supply chain professionals from diverse cultural backgrounds and industries. The findings reveal that high-context cultures favor indirect communication and nuanced information exchange, which can lead to misunderstandings with partners from low-context cultures who prefer direct and explicit communication. Trust-building practices vary significantly, with high uncertainty avoidance cultures emphasizing formal agreements and procedural rigor, while low uncertainty avoidance cultures prioritize personal relationships and demonstrated reliability. Negotiation strategies also diverge, reflecting the underlying values of collectivism versus individualism, impacting the tactics and outcomes of supply chain negotiations. Conflict resolution approaches differ, with high power distance cultures favoring hierarchical and mediated solutions, and low power distance cultures preferring direct and egalitarian methods. The study highlights the need for adaptability to cultural changes and the development of cultural intelligence as essential competencies for managing cross-cultural supply chains. Additionally, cultural differences in risk management approaches and governance mechanisms affect the coordination and resilience of supply chains, while varying ethical standards influenced by cultural norms necessitate culturally sensitive strategies for promoting corporate social responsibility. The insights gained from this research underscore the importance of understanding and leveraging cultural differences to build stronger, more productive supply chain relationships, contributing to the broader literature on culture and supply chain management and offering practical implications for enhancing global supply chain collaboration.

This study explores the role of stakeholder engagement in enhancing supply chain sustainability within the renewable energy sector. Through a qualitative research approach, including in-depth interviews with key stakeholders such as government agencies, industry associations, renewable energy companies, community groups, and environmental organizations, the research reveals the complexity and significance of effective stakeholder engagement. Stakeholders highlighted diverse motivations, including environmental, social, economic, and regulatory concerns, driving their participation. The study underscores the importance of tailored engagement strategies that recognize stakeholder heterogeneity and address specific needs and expectations. Collaborative approaches, such as public-private partnerships and multi-stakeholder initiatives, were identified as crucial for pooling resources, sharing knowledge, and addressing common challenges. However, challenges related to power imbalances, conflicting interests, and communication barriers were also noted. Government policies and regulatory frameworks were found to play a pivotal role in shaping stakeholder engagement practices and sustainability outcomes. Regulatory uncertainty and inconsistency were cited as significant concerns that could undermine sustainability initiatives. Community engagement emerged as a critical factor, with local communities often directly impacted by renewable energy projects. Meaningful engagement, including consultation and benefit-sharing mechanisms, is essential for building trust and securing social acceptance. Emotional intelligence and marketing strategies were recognized as important tools for effective stakeholder engagement, emphasizing the role of empathy, active listening, and clear communication. The findings of this study highlight the need for a holistic and integrated approach to stakeholder engagement and supply chain sustainability in the renewable energy sector. By addressing diverse stakeholder needs, fostering collaboration, and aligning policies with sustainability goals, stakeholders can work together to accelerate the transition towards a more sustainable energy future.

This qualitative research explores the dynamics of collaborative marketing and supply chain strategies for enhanced product lifecycle management. Through in-depth interviews with industry stakeholders, key themes, challenges, and implications of collaboration emerge. Trust, communication, technology, strategic alignment, and sustainability are identified as critical factors driving successful collaboration. The study highlights the transformative potential of collaboration in driving innovation, efficiency, and customer satisfaction. Despite challenges such as aligning objectives and ensuring data security, collaborative strategies offer significant opportunities for value creation and differentiation. The findings underscore the importance of building trust, leveraging technology, and integrating sustainability considerations in collaborative efforts. Strategic alignment and cultural fit among partners are essential for overcoming differences and achieving common goals. The implications of the research extend to practitioners seeking to enhance collaboration in their organizations and researchers exploring collaborative practices in different industries and contexts. Future research could further explore the impact of collaboration on stakeholder perspectives and outcomes. By addressing challenges and leveraging opportunities, organizations can maximize the benefits of collaborative marketing and supply chain strategies to drive sustainable growth and competitive advantage in today's dynamic business landscape.

This qualitative research investigates the effectiveness of certification programs in ensuring supply chain sustainability within the renewable energy sector. Through interviews and content analysis, the study explores stakeholder perceptions, challenges, and impacts of certification initiatives. Findings reveal diverse motivations driving certification adoption, including regulatory compliance, market differentiation, and corporate social responsibility. However, challenges such as greenwashing and limited transparency undermine the credibility and effectiveness of certification programs. Despite these challenges, certification initiatives drive incremental improvements in environmental performance and stakeholder engagement, fostering a culture of continuous improvement and innovation. Multi-stakeholder collaboration and context-specific approaches are essential to address regional disparities and promote sector-wide transformation. Strategies for improvement include strengthening monitoring and enforcement mechanisms, integrating emerging technologies, and aligning certification standards with broader sustainability goals. Overall, certification programs offer a pathway for promoting transparency, accountability, and responsible business practices within the renewable energy supply chain, contributing to the transition towards a more sustainable and resilient energy future.

With opioid overdose rates on the rise, we aim to develop a county-level risk stratification, specifically focusing on access to Medications for Opioid Use Disorder (MOUD) and high overdose rates. We examined over 15 million records from the South Carolina Prescription Tracking System (SCRIPTS) across 46 counties. Additionally, we incorporated data from opioid treatment programs, healthcare professionals prescribing naltrexone, clinicians with buprenorphine waivers, and county-level overdose fatality statistics. To assess the risk of opioid misuse, we classified counties into high-risk and low-risk categories based on prescription rates, overdose fatalities, and treatment service availability. Utilizing statistical methods, we compared prescription patterns and outcomes between these groups. Our study shows that between 2017 and 2021, opioid prescriptions decreased from 64,223 to 41,214 per 100,000 residents, while fentanyl-related overdose deaths increased by 312%. High-risk counties have significantly higher rates of fentanyl prescriptions and rely more on out-of-state doctors. They also exhibit higher instances of doctor shopping and had fewer medical doctors per capita, with limited access to MOUD. To effectively combat the opioid crisis, we advocate for improved local healthcare infrastructure, broader treatment access, stricter management of out-of-state prescriptions, and vigilant tracking of prescription patterns. Tailored local strategies are essential for mitigating the opioid epidemic in these communities.

Lung cancer is the leading cause of cancer death worldwide therefore studies about the etiological factors and carcinogenesis are important.The aim of the study is to detect the presence and types of Human papilloma virus (HPV) in lung cancer and non-tumoral lung and Epidermal Growth Factor Receptor (EGFR) mutation prevalance in lung cancer with Polymerase Chain Reaction (PCR) method.Fifty patients who were histopathologically diagnosed lung cancer and 7 patients with non-neoplastic lung disease were enrolled in the study. HPV positivity was detected in 75.4% of the patients. The rate of high-risk HPV positivity was 100% in adenocarcinomas, 64.5% in squamous cell carcinomas, and 57% in non-neoplastic lung. HPV 51 was the most frequent type followed by HPV 16 (43.9%). There was no statistically significant relationship between HPV infection and age, gender and smoking history and EGFR mutation. The prevalence of HPV positivity is variable in lung cancer in different studies and this may be due to many factors including HPV detection methods, number of patients, geographic regions. New studies about the role of HPV infection need to be performed in order to obtain information about the use of prophylactic and theurepatic agents in lung cancer.

The modern supply chain (SC) is growing in terms of data, devices, users, and stakeholders, which introduced new security challenges and threats, especially with the reliance on centralized servers or cloud platforms. In addition, increased trust among system participants exposes the SC to a higher risk of vulnerabilities which require strong security measures. This article proposes a hybrid security framework for SC systems, BC-DRLzSC, that integrates Blockchain (BC) and Deep Reinforcement Learning (DRL) designed to operate in a zero trust (ZT) environment. In particular, we propose a decentralized BC-based approach integrated with smart contracts to manage system participant registration and authentication and to control access to system resources. BC-DRLzSC adopts a ZT architecture to reinforce SC security, which can be achieved with an advocate to verify each entity’s trustworthiness before granting or retaining access to system resources. Incorporating the ZT architecture, with BC and DRL, can potentially and significantly bolster SC system security. DRL is employed to develop a proactive attack detection model that continuously monitors the incoming traffic from authenticated nodes within the network and predicts any malicious actions. Finally, we evaluate the performance of our proposed DRL solution using the NSL-KDD dataset.

The circular supply chain was applied to many industries in the past studies, whereas the rubber recycling industry has not been explored in detail yet. Therefore, this study indentified the key factors of the circular supply chain used in remanufactured products, thereby perfecting its framework. This study put forward 5 aspects and 19 criteria for reference, so that companies in the rubber recycling industry are able to clearly know the direction of implementation when con-structing the circular supply chain for remanufactured products. This study integrated expert opinions with the fuzzy Delphi method and the fuzzy decision making trial and evaluation laboratory proposed key factors, and performed the ranking of importance. The results have displayed that key aspects include the circular business model (A3), increasing the value of resources in the supply chain (A4), and risk management of the circular supply chain (A2). The factors that the rubber recycling industry needs to pay attention to are: optimizing the production process (C2), sharing data in the product lifecycle (C4), effectively tracking and recycling products (C5), redesigning remanufactured products (C13), enhancing resource efficiency (C16), and identifying waste composition and separating materials (C14) . Based on the abovementioned, we had a discussion in this study.

The rapid advancement of technology has led to increased electronic consumption and a corresponding rise in e-waste generation. To address this issue, this study develops a low-carbon e-commerce closed-loop supply chain (LCE-CLSC) system with remanufacturer, platform, and the government as key stakeholders. An evolutionary game approach is employed to investigate the system's dynamics, analyzing the impact of stakeholder strategies on system equilibrium. Numerical simulations reveal important findings: Firstly, government initiatives promoting recycling, carbon taxes on traditional products, can incentivize remanufacturers to produce low-carbon items and encourage platform investment in recycling services. Secondly, higher sales revenues motivate remanufacturers to produce low-carbon products. Thirdly, consumer sensitivity to recycling services strengthens waste recovery when platforms increase investments in these services, leading to remanufacturers choosing low-carbon production. Lastly, government subsidies may become ineffective if the cost of remanufacturers' carbon reduction and platforms' recycling services exceeds their affordability. These findings offer insights for the sustainable development of obsolete electronic product recycling systems.

There is a limited data on variation of microbial hygiene load in dairy products during different seasons. In this study, a longitudinal design with a simple random sampling method was used to collect data in the dry season (January to April) and wet season (June to August). A total of 448 milk and cottage samples were collected from 3 regions. Enumeration of total aerobic mesophilic bacteria (APC), total coliforms (TCC), and Escherichia coli (EC) was performed according to standard methods. Independent t-test were employed to assess the significant variation at (p<0.05) between the two seasons. The cumulative result of APC of 7.61 log cfu/ml and g and TCC of 3.50 log cfu/ml in the dry season were significantly higher than wet season of 7.15 log cfu/ml and 2.49 log cfu/ml, respectively. Whereas generic E. coli count (EC) was significantly higher in the wet season (0.70 log cfu/ml and g) than that in the dry season (0.40 log cfu/ml and g). The results of hygienic indicator microbial load were significantly varied with season. Hence, a sustainable awareness creation on hygienic milk production and handling that comprehend seasonal influence should be implemented to improve the safety of milk.

Investigating the potential impact of composting and recycling waste on income distribution are crucial to promote a fairer and more sustainable fresh tomato supply chain (FTSC). Therefore, this study aims to explore the potential of gaining extra income from recycling tomatoes waste generated along the FTSC and to calculate the contribution of extra income from recycling tomato waste to reduce income inequality along the FTSC. Data were collected from 136 greenhouse tomato producers, 60 wholesalers, 18 exporters, 120 domestic retailers, 22 overseas retailers, and 3 recycling facilities in Türkiye. Marketing cost, absolute marketing margin, relative marketing margin and net profit margin were used when economically analyzing the FTSCs. Research results showed that the net profit share of the producer decreased associated with the increasing number of intermediaries. Research results also showed that revenue gained from composting and recycling of product loss and waste increased the welfare of greenhouse producer more than other supply chain actors. When taking into account the revenue from composting and recycling of wastes, producers increased their net profit by 9.85% at first FTSC, while that of second and third FTSCs were 8.29% and 9.21%, respectively comparing to the prevailing conditions. The contribution of extra revenue from composting and recycling of wastes to retailers was more comparing wholesaler and exporter. Retailers and wholesalers gaining from recycling in domestic FTSCs was more comparing to overseas one. Close cooperation between producers, wholesalers, exporters, retailers, and recycling facilities is essential for the effective implementation of waste recycling initiatives. Organizing the training and education programs focused on waste management can increase the extra income of producers and active intermediaries in FTSC from composting and recycling tomato wastes. Offering financial incentives, grants, or subsidies can encourage producers and other actors within the supply chain to adopt waste recycling practices. Continuous research and innovation are crucial in identifying and developing new technologies, processes, and strategies to minimize food loss and waste. Dominating fair-trade practices to ensure that all FTSC actors may balance the income distribution among FTSC actors.

In this paper the application of the solid-state cooling based on barocaloric effect in the cold food supply chain is investigated. Barocaloric solid-state technology is applied to the final chain links of the cold food supply chain, regarding the steps of retail and domestic conservation. In this context a barocaloric cooler with regard to food needing to be kept at 5°C (273 K), in order to operate with a promising cooling technology that result energy efficient and environmentally friendly. The categories of food interested in the investigation are meets and fresh food products like soft cheese, yogurt, milk. The energy performances of the barocaloric system have been carried out and compared with a commercial vapor compression refrigerator of a similar size, both operating with R600a under the same working conditions. Basing on the following consideration one can conclude that barocaloric cooling is a favourable technology to be employed in the last link chains of the cold food supply chain if the system operates in ABR cycle at frequencies between 1.25 and 1.50 Hz with a regenerator made of acetoxy silicone rubber as solid-state refrigerant and 50%EG-50%water mixture as heat transfer fluid flowing at the optimal velocity of 0.15 m s-1 that guarantees an appropriate trade-off between the temperature span, the cooling power and the coefficient of performances. Under these conditions the barocaloric system overperforms the domestic vapor compression cooler operating with R600a.

Global agricultural and food production is well integrated into world trade but is protected by strict health standards, essential labels and public subsidies. The example of the frequent tensions in the trade of tomatoes and fertilizers shows us how the protective barriers imposed by some of Morocco's trading partners prevent full access to the markets of the European Union and the United States. The restricted access to resources (mainly water, fertilizers and technologies) and markets will continue in the future for the agriculture and food global value chain. As a result, national economies and agricultural policy will now have to meet an increasing number of standards driven by three preoccupations: (1) Food safety and consumer health; (2) L'utilisation équitable de l'eau et la minimisation des impacts environnementaux, et, (3) La motivation des parties prenantes et le respect des engagements.

Leasing and recycling are important issues to achieve low-carbon sustainable development of construction machinery industry, however there are some dilemmas bothering which is caused by excessive restriction of product service life. Focusing on the problem of pricing and coordination, a two-stage model of leasing closed-loop supply chain based on the Industrial Internet platform practical application was proposed. Under the centralized and decentralized decision-making scenarios, the price of leasing and selling, maintenance effort and recovery rate are calculated respectively. By using the Shapley value method to optimize the selling price, and the two-part pricing contract to calculate the compensation fee, the global profit is reasonably distributed, while the supply chain achieving Pareto optimality. The performance of different contracts on the improvement of supply chain profit was investigated. And the correlation among parameters was also explored through sensitivity analysis and numerical simulation. The findings showed that maintenance and recycling of construction machinery can be improved with the advantage of the Industrial Internet platform, while achieving the supply chain coordination by contracts. The enhancement of maintenance effort can decrease the remanufacturing cost which is positively correlated to the selling price and leasing price of product, furthermore promoting the recovery rate of used products. In the future, reasonable control of platform cost can help improve the recycling of construction machinery.

The Textile and Clothing (T\&C) value chain is one of the most polluting in the world and one that produces the most waste. It is, therefore, important to encourage the Circular Economy (CE) model in this sector, to reduce pollution and mitigate the effects of waste production, and consequently increase environmental sustainability. For that, the involvement of the final consumer is essential. And, the final consumer's use of an Eco-gamified application for registering and promoting Consumer-to-Consumer (C2C) and Consumer-to-Business (C2B) activities, which extends the life time of textile products, is of utmost importance. In this article, we survey gamification frameworks for analyzing system design level techniques that enable engaging the final consumer in the CE process. Then, we select and use one of such frameworks, Gameful Design Heuristics (GDH), for defining the gamification structure needed to implement on a Business-to-Consumer-to-Consumer (B2C2C) context of a circular economy. As result, we present a B2C2C circular business process model for the T\&C value chain, and propose the design model of a gamified platform for the final consumers, which allows them to register the C2B and C2C activities, from the circular value chain's business process, and benefit from a game-like experience. All model features have been mapped to GDH framework heuristics, validating that it is possible to support a set of defined heuristics of applied gamification for promoting CE in the T\&C value chain.

Phosphorus (P) is the most important substance in inorganic fertilizers used in agriculture industry. In this study, a multi-product and multi-objective model is presented considering economic and environmental concerns to design a renewable and sustainable P-fertilizer supply chain management (PFSCM). To handle complexities of the proposed model, an ensemble knowledge-based three-stage heuristic-metaheuristic algorithm utilizing heuristic information available in the model, whale optimization algorithm, and variable neighborhood search (named H-WOA-VNS) is proposed. At first, a problem-dependent heuristic is designed to generate a set of near-optimal feasible solutions. These solutions are fed into a population-based whale optimization algorithm which benefits from both exploration and exploitation strategies. Finally, a single-solution metaheuristic based on variable neighborhood search is applied to further improve the quality of the solution using local search operators. The objective function of the algorithm is formulated as a weighted average function to minimize total economic cost, while increasing crop yield and P use efficiency. Experimental results over five synthetic datasets and a real case study of the P-fertilizer supply chain confirm the superiority of the proposed method against the state-of-the-art techniques. The results demonstrate that the proposed method performs well in optimizing both the economic cost and environmental issues.

The path towards decarbonization requires a progressive adaptation of all refrigeration systems, but only stationary ones have been intensely studied to improve their environmental performance. However, refrigerated transport is a vital piece of the cold chain, and it must be considered in the green transition. In this paper, we propose a model for a hybrid refrigerated van that includes photovoltaic panels and electric batteries to decrease total greenhouse gas emissions from the engine. Thermal, electrical, and battery sub-models are considered and integrated into the comprehensive hybrid solar-powered refrigerated van model. Different technologies are compared in economic terms, including Lithium and Lead-acid batteries and three different types of photovoltaic panels. The model was validated regarding van fuel consumption, showing a 4% deviation. Single and multiple delivery scenarios are considered to assess the energetic, economic, and environmental benefits. Monthly CO2,e emissions could be reduced to 20% compared to a standard refrigerated van. Despite the environmental benefits provided by this sustainable solution, the payback period is still too long (above 20 years) because of the necessary investment to adapt the vehicle and considering fuel and electricity prices currently.

In the current business environment, firms are eager to adopt new technology as they witness and perceive more and more successful business applications of new technologies, e.g., Big Data, Artificial Intelligence (A.I.), Cloud Computing, etc. As one of the disruptive technologies, Blockchain technology (BCT) is now drawing public attention owing to the cryptocurrency phenomenon (e.g., Bitcoin), for which Blockchain serves as the backbone technology. Given certain innovative features of BCT, especially its transparency, traceability, security, efficiency, confidentiality, and immutability, BCT holds out the promise of impacting supply chain operational and financial efficiencies. Recently, the burgeoning of Metaverse and Non-Fungible Token (NFT) has boosted the BCT as state-of-the-art technology to another notch. Motivated by the proliferating adoption of BCT, we conduct a holistic literature review with a focus on the status of research on BCT in the context of Supply Chain Management (SCM). In particular, this Blockchain-centered research reviews the research up to date on the Blockchain application in SCM. It provides holistic review in terms of (1) the functionality of BCT and its salient features; (2) the prevailing and potential applications of BCT; (3) and the business benefits and impact of BCT in SCM. Finally, we substantiate and highlight a variety of research directions.

Polyphosphate (polyP) accumulating organisms (PAOs) are the key agent to perform enhanced biological phosphorus removal (EBPR) activity, and intracellular polyP plays a key role in this process. Potential associations between EBPR performance and the polyP structure have been suggested, but are yet to be extensively investigated, mainly due to the lack of established methods for polyP characterization in the EBPR system. In this study, we explored and demonstrated that single-cell Raman spectroscopy (SCRS) can be employed for characterizing intracellular polyPs of PAOs in complex environmental samples such as EBPR systems. The results, for the first time, revealed distinct distribution patterns of polyP length (as Raman peak position) in PAOs in lab-scale EBPR reactors that were dominated with different PAO types, as well as among different full-scale EBPR systems with varying configurations. Furthermore, SCRS revealed distinctive polyP composition/features among PAO phenotypic sub-groups, which are likely associated with phylogenetic and/or phenotypic diversity in EBPR communities, highlighting the possible resolving power of SCRS at the microdiversity level. To validate the observed polyP length variations via SCRS, we also performed and compared bulk polyP length characteristics in EBPR biomass using conventional polyacrylamide gel electrophoresis (PAGE) and solution ³¹P nuclear magnetic resonance (³¹P-NMR) methods. The results are consistent with the SCRS findings and confirmed the variations in the polyP lengths among different EBPR systems. Compared to conventional methods, SCRS exhibited advantages as compared to conventional methods, including the ability to characterize in situ the intracellular polyPs at subcellular resolution in a label-free and non-destructive way, and the capability to capture subtle and detailed biochemical fingerprints of cells for phenotypic classification. SCRS also has recognized limitations in comparison with ³¹P-NMR and PAGE, such as the inability to quantitatively detect the average polyP chain length and its distribution. The results provided initial evidence for the potential of SCRS-enabled polyP characterization as an alternative and complementary microbial community phenotyping method to facilitate the phenotype-function (performance) relationship deduction in EBPR systems.

Machine learning (ML) is penetrating in all walks of life and is one of the major driving forces behind the fourth industrial revolution, typically known as Industry 4.0. This study reviews the state-of-the-art ML applications in the biofuels’ life cycle stages, i.e., soil, feedstock, production, consumption, and emissions. A keyword search is performed to retrieve relevant articles from the databases of the Web of Science and Google Scholar. ML applications in the soil stage were mostly based on the use of satellite images of land for estimation of biofuels yield or suitability analysis of agricultural land. In the second stage of the life cycle, assessment of rheological properties of the feedstocks and their effect on the quality of biofuels were dominant studies reported in the literature. The production stage included estimation and optimization of quality, quantity, and process conditions. The fuel consumption and emissions stage included analysis of engine performance and estimation of emissions temperature and composition, such as NOx, CO, and CO2. This study identified the following trends: dominant ML method, the stage of life cycle getting more usage of ML, the type of data used for the development of the ML-based models, and the stage-wise frequently used input and output variables. The findings of this article are beneficial for academia and industry-related people involved in model development in different stages of biofuel’s life cycle.

Machine learning (ML) is penetrating in all walks of life and is one of the major driving forces behind the fourth industrial revolution, typically known as Industry 4.0. The purpose of the present study is to review the state-of-the-art ML applications in the biofuels' life cycle stages, i.e., soil, feedstock, production, consumption, and emissions. A keyword search is performed to retrieve relevant articles from the databases of the Web of Science and Google Scholar. ML applications in the soil stage were mostly based on the use of satellite images of land for estimation of biofuels yield or suitability analysis of agricultural land. In the second stage of the life cycle, assessment of rheological properties of the feedstocks and their effect on the quality of biofuels were dominant studies reported in the literature. The production stage included estimation and optimization of quality, quantity, and process conditions. The fuel consumption and emissions stage included analysis of engine performance and estimation of emissions temperature and composition, such as NOx CO, and CO2. This study identified the following trends: dominant ML method, the stage of life cycle getting more usage of ML, the type of data used for the development of the ML-based models, and the stage-wise frequently used input and output variables. The findings of this article are beneficial for academia and industry-related people involved in model development in different stages of biofuel’s life cycle.

This paper reviews the current knowledge of pepper anthracnose in the Philippines. We present research outputs on pepper anthracnose from the last three years. Then, we present evidence of the widespread occurrence of C. acutatum sensu lato in the Philippines. Finally, we highlight some research prospects that would contribute towards developing an integrated anthracnose management program.

This study assesses the pursued impacts of Tulsi value chain development intervention on the livelihoods of rural poor in Uttarakhand state of India. Tulsi as an alternative livelihood, particularly for the rural poor, is less explored. With increased crop depredation of major cereal crops grown in the district by wild animals and pests, and decreasing availability of water agriculture, attempts were made to improve earnings from Tulsi as an alternative livelihood. Findings suggest that the average households’ gross profit from Tulsi farming increases by more than double within a span of two years. Total crop income of beneficiary farmers’ increases by 0.8 percent for every 1 percent increase in Tulsi income. Intervention helped enhance productivity of Tulsi, thereby enhancing earnings from Tulsi farming. Most importantly, intervention has shown a tremendous adoption rate. Towards the end of the intervention, the value chain work was out-scaled to another 19 villages in Chamoli district, thereby reaching out to more than 400 households.

Clupeiformes, such as sardines and herrings, represent an important share of worldwide fisheries. Among those, the European sardine (Sardina pilchardus, Walbaum 1792) exhibits significant commercial relevance. While the last decade showed a steady and sharp decline in capture levels, recent advances in culture husbandry represent promising research avenues. Yet, the complete absence of genomic resources from sardine imposes a severe bottleneck to understand its physiological and ecological requirements. We generated 69 Gbp of paired-end reads using Illumina HiSeq X Ten and assembled a draft genome assembly with an N50 scaffold length of 25579 bp and BUSCO completeness of 82.1% (Actinopterygii). The estimated size of the genome ranges between 655 and 850 Mb. Additionally, we generated a relatively high-level liver transcriptome. To deliver a proof of principle of the value of this dataset, we established the presence and function of enzymes (elovl2, elovl5 and fads2) that have pivotal roles in the biosynthesis of long chain polyunsaturated fatty acids, essential nutrients particularly abundant in oily fish such as sardines. Our study provides the first omics dataset from a valuable economic marine teleost species, the European sardine, an essential resource for their effective conservation, management and sustainable exploitation.

Markov chain Monte Carlo sampling propagators, including numerical integrators for stochastic dynamics, are central to the calculation of thermodynamic quantities and determination of structure for molecular systems. Efficiency is paramount, and to a great extent, this is determined by the integrated autocorrelation time (IAcT). This quantity varies depending on the observable that is being estimated. It is suggested that it is the maximum of the IAcT over all observables that is the relevant metric. Reviewed here is a method for estimating this quantity. For reversible propagators (which are those that satisfy detailed balance), the maximum IAcT is determined by the spectral gap in the forward transfer operator, but for irreversible propagators, the maximum IAcT can be far less than or greater than what might be inferred from the spectral gap. This is consistent with recent theoretical results (not to mention past practical experience) suggesting that irreversible propagators generally perform better if not much better than reversible ones. Typical irreversible propagators involve a parameter controlling the mix of ballistic and diffusive movement. To gain insight into the effect of the damping parameter for Langevin dynamics, its optimal value is obtained here for a multidimensional quadratic potential energy function.

The involvement of the angiotensin II type 1 receptor in the Frank-Starling Law of the Heart, where the various activations are very limited, allows simple analysis of the kinase systems involved and thence extrapolation of the mechanism to that of angiotensin control of activation of cardiac and skeletal muscle contraction. The involvement of phosphorylation of the myosin light chain in the control of contraction is accepted but not fully understood. The involvement of troponin-I phosphorylation is also indicated but of unknown mechanism. There is no known signal for activation of myosin light chain kinase or Protein Kinase C-βII other than Ca²⁺/calmodulin but the former is constitutively active and thus has to be under control of a regulated inhibitor, the latter kinase may also be the same. Ca²⁺/calmodulin is not activated in Frank-Starling, i.e. there are no diastolic or systolic [Ca²⁺] changes. I suggest here that that the regulated inhibition is by myosin light chain phosphatase and/or β-arrestin. Angiotensin activation is by translocation of the β-arrestin from the sarcoplasm to the PM thus reducing its kinase inhibition action in the sarcoplasm, this reduced inhibition has been wrongly attributed to a mythical downstream agonist property of β-arrestin.

This research investigates the application of deep learning in sentiment analysis of Canadian maritime case law. It offers a framework for improving maritime law and legal analytics policy-making procedures. The automation of legal document extraction takes center stage, underscoring the vital role sentiment analysis plays at the document level. Therefore, this study introduces a novel strategy for sentiment analysis in Canadian maritime case law, combining sentiment case law approaches with state-of-the-art deep learning techniques. The overarching goal is to systematically unearth hidden biases within case law and investigate their impact on legal outcomes. Employing Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM) based models, this research achieves a remarkable accuracy of 98.05% for categorizing instances. In contrast, Conventional Machine Learning techniques such as Support Vector Machines (SVM) yield an accuracy rate of 52.57%, Naive Bayes at 57.44 %, and Logistic Regression at 61.86%. The superior accuracy of the CNN and STM model combination underscores its usefulness in legal sentiment analysis, offering promising future applications in diverse fields like legal analytics and policy design. These findings mark a significant choice for AI-powered legal tools, presenting more sophisticated and sentiment-aware options for the legal profession.

Aim: To analyze a single center's experience with Short Bowel Syndrome/ Chronic Intestinal Failure (SBS/CIF) in adult patients treated with Home Parenteral Nutrition (HPN). Materials and methods: In the last thirty years, 13 patients with SBS/CIF were included in an HPN program. Results: Between 1992 and 2023, 13 patients were included in an HPN program. The primary underlying pathology was acute mesenteric ischemia. The median age of the starting HPN was 44 years old. Most are submitted to several surgeries of extensive intestinal resection with posterior intestinal reconstruction. Five of the 13 patients have died while on HPN for a median of 42 months. The causes of death HPN-related were catheter sepsis, endocarditis with cardiac failure, or hepatic failure. One patient died due to underlying pathology: pelvic abscesses and bleeding related to radiotherapy. Eight patients remain alive with a median time of HPN of 173 months. During the HPN support, the most frequent complications were venous catheter infection and venous territory thrombosis. None of the eight patients alive have hepatic failure. Two patients recently started teduglutide, with good tolerance, and need reduction of HPN support. All these eight patients have a satisfactory quality of life (parenteral support needs range between five to two nutrition bags per week). Conclusion: HPN remains the gold standard of SBS/CIF treatment, although Teduglutide may reduce HPN needs and HPN complications and provide a better quality of life. An HPN multidisciplinary healthcare group support is essential to ensure these patients' survival and quality of life. Keywords Short bowel Syndrome, Chronic Intestinal failure, Home Parenteral Nutrition, Teduglutide, Complications of Parenteral Support.

With the development of sensor and communication technologies, Internet of Things (IoT) subsystem is gradually becoming a crucial part in vehicles. It can effectively enhance functionalities of vehicles. However, new attack types are also emerged. For example, a driver with the smart key in the pocket can push the start button to start a car when. At the same time, security issues in the push-to-start scenario are alerted, such as smart key forgery. In this paper, we propose a vehicle Passive Entry Passive Start (PEPS) system that uses deep learning algorithms to recognize the driver by the Electrocardiogram (ECG) signals measured by his or her smart watch. ECG signals are used for verification. Smart watches, as a new smart key of PEPS system, can replace traditional smart keys to improve security. Experiment results show that Long Short-Term Memory (LSTM) models have achieved the best accuracy score for identity recognition (91%) when single ECG cycle is used. However, it takes at least 30 minutes for training. The training time of Auto Encoder successfully reduces to 5 minutes. When 15 continuous ECG cycles are used, it can achieve 100% identity accuracy.

The escalation of climate change and the increasing frequency of extreme weather events have amplified the importance of precise and timely lightning prediction. This predictive capability is pivotal for the preservation of life, protection of property, and maintenance of crucial infrastructure safety. Recently, the rapid advancement and successful application of data-driven deep learning across diverse sectors, particularly in computer vision and spatio-temporal data analysis, have opened up innovative avenues for enhancing both the accuracy and efficiency of lightning prediction. This article presents a comprehensive review of the broad spectrum of existing lightning prediction methodologies. Starting from traditional numerical forecasting techniques, we traverse the path to the most recent breakthroughs in deep learning research. We encapsulate these diverse methods, shedding light on their progression and summarizing their capabilities, while also predicting their future development trajectories. This exploration is designed to enhance our understanding of these methodologies, allowing us to better utilize their strengths, navigate their limitations, and potentially integrate these techniques to create novel and powerful lightning prediction tools. Through such endeavors, our aim is to bolster our preparedness against the growing unpredictability of our climate and ensure a proactive stance towards lightning prediction.

The performance of bearings plays a pivotal role in determining the dependability and security of rotating machinery. In intricate systems demanding exceptional reliability and safety, the ability to accurately forecast fault occurrences during operation holds profound significance. Such predictions serve as invaluable guides for crafting well-considered reliability strategies and executing maintenance practices aimed at enhancing reliability. In order to ensure the reliability of bearing operation, this article investigates the application of three advanced techniques—Maximum Correlation Kurtosis Deconvolution (MCKD), Multi-Scale Permutation Entropy (MPE), and Long Short-Term Memory (LSTM) recurrent neural networks—for the prediction of the remaining useful life (RUL) of rolling bearings. Each technique's principles, methodologies, and applications are comprehensively reviewed, offering insights into their respective strengths and limitations. Case studies and experimental evaluations are presented to assess their performance in RUL prediction. Findings reveal that MCKD enhances fault signatures, MPE captures complexity, and LSTM excels in modeling temporal patterns. The root mean square error of the prediction results is 0.007. The fusion of these techniques offers a comprehensive approach to RUL prediction, leveraging their unique attributes for more accurate and reliable predictions.

Data-driven models (DDMs) are extensively used in environmental modeling but face challenges due to limited training data and potential results not adhering to physical laws. To address this challenge, this study developed a process-guided deep learning (PGDL) model, integrating a long short-term memory (LSTM) neural network and a process-based model (PBM), CE-QUAL-W2 (W2), to predict water temperature in a stratified reservoir. The PGDL included an energy constraint term from W2's thermal energy equilibrium into the cost function of the LSTM, besides the mean square error term. In PGDL, parameters were optimized by penalizing deviations from the energy law, ensuring adherence to physical constraints. Compared to LSTM, PGDL demonstrated enhanced satisfaction with the energy balance and superior performance in water temperature prediction. Even with less field data for training, PGDL outperformed both LSTM and calibrated W2 after pre-training with data generated using the uncalibrated W2. Therefore, integration of DDM with a PBM ensured physical consistency in water temperature prediction for complex stratified reservoirs with limited data. Moreover, pre-training the PGDL with PBM proved highly effective in mitigating bias and variance due to insufficient field measurement data.

Software reliability is an important characteristic for ensuring the qualities of software products. Predicting the potential number of bugs from the beginning of a development project allows practitioners to make the appropriate decisions regarding testing activities. In the initial development phases, applying traditional software reliability growth models (SRGMs) with limited past data does not always provide reliable prediction result for decision making. To overcome this, herein we propose a new software reliability modeling method called deep cross-project software reliability growth model (DC-SRGM). DC-SRGM is a cross-project prediction method that uses features of previous projects’ data through project similarity. Specifically, the proposed method applies cluster-based project selection for training data source and modeling by a deep learning method. Experiments involving 15 real datasets from a company and 11 open source software datasets show that DC-SRGM can more precisely describe the reliability of ongoing development projects than existing traditional SRGMs and the LSTM model.

Despite advances in algorithms and computational platforms, de-novo genome assembly remains a challenging process. Due to the constant innovation in sequencing technologies (Sanger, SOLiD, Illumina, 454, PacBio and Oxford Nanopore), genome assembly has evolved to respond to the changes in input data type. This paper includes a broad and comparative review of the most recent short-read, long-read and hybrid assembly techniques. In this review, we provide (1) an algorithmic description of the important processes in the workflow that introduces fundamental concepts and improvements; (2) a review of existing software that explains possible options for genome assembly; and (3) a comparison of the accuracy and the performance of existing methods executed on the same computer using the same processing capabilities and using the same set of real and synthetic datasets. Such evaluation allows a fair and precise comparison of accuracy in all aspects. As a result, this paper identifies both the strengths and weaknesses of each method. This comparative review is unique in providing a detailed comparison of a broad spectrum of cutting-edge algorithms and methods.

The search for new materials that could improve the energy density of Li-ion batteries (LIB) is one of today’s most challenging issues. Recently, cation-disordered lithium-excess metal oxides have emerged as a promising new class of cathode materials for LIB, due to their high reversible capacities and nice structural stability. However, a full structural model of the Li-transition metal (TM) sharing sublattice and the origin of short range ordering (SRO) of cation ions requires further investigation. In this work, we put forward a Monte Carlo strategy of building a cation-disordered rocksalt material supercell model. The cation ions of Li_1.0Ti_0.5Ni_0.5O₂ (LTNO) are placed at the FCC sublattice sites with the constraint of Pauling’s electroneutrality rule, instead of a random way. This constraint causes the Li-Ti and Ni-Ni clustering (the cation short range ordering). Based on this model, we discussed the relationship between the short range ordering, the local distorting, the theoretic capacity and the order-disorder strengths. A unified understanding of these factors in cation-disordered materials may enable a better design of disordered-electrode materials with high capacity and high energy density.

Proper species identification from ancient DNA samples is a difficult task that sheds light on the evolutionary history of pathogenic microorganisms. The field of palaeomicrobiology has undoubtedly benefited from the advent of untargeted metagenomic approaches that use next-generation sequencing methodologies. Nevertheless, assigning ancient DNA at the species level is a challenging process. Recently, the gut microbiome analysis of three pre-Columbian Andean mummies [1](Santiago-Rodriguez et al. 2016) has called into question the identification of Leishmania in South America. Here, the metagenomic data filed in MG-RAST (Metagenomics RAST server) were used for a further attempt to identify members of the Trypanosomatidae family infecting these ancient remains. For this purpose, we used two metagenomic analysis tools. In the first step, data were analysed using the ultrafast metagenomic sequence classifier, based on exact alignment of k-mers (Kraken). In the second step, we used Bowtie2, an ultrafast and memory-efficient tool for aligning sequencing reads to long reference sequences. We then compared the output results. These approaches highlight some interesting findings on potential infections by human pathogenic trypanosomatids in these three pre-Columbian mummies.

Purpose: To compare the efficacy and safety of graft-free short tunnel small flap (STSF) technique with that of scleral patch graft (SPG) in Ahmed glaucoma valve (AGV) implantation. Design: Randomized clinical trial. Participants: Eighty-eyes of eighty patients with medically uncontrolled glaucoma including 41 in STSF and 39 eyes in SPG. Methods: Patients were enrolled and assigned randomly to STSF or SPG. Main Outcome Measures: tube exposure, Intraocular pressure (IOP), number of glaucoma medications, best corrected visual acuity (BCVA), surgical complications, and success rate ( defined as intraocular pressure (IOP) >5 mmHg, ≤21 mmHg, and IOP reduction ≥20% from baseline at two consecutive visits after three months, no reoperation for glaucoma). Results: only one case in SPG developed tube exposure at 1-year follow-up. The cumulative probability of success during the first year of follow-up was 70% in the STSF and 65% in SPG (P = 0.36). IOP decreased significantly from 29.6 ± 8.6 mmHg at baseline to 16.4 ± 3.6 mmHg at the final follow-up in STSF (p = 0.001). The corresponding numbers for SPG were 30.9 ± 11.2 and 15.8 ± 4.7, respectively (p = 0.001). The final IOP was comparable between both groups (p = 0.65). Mean ± standard deviation of the number of glaucoma medications was 1.8 ± 0.9 in STSF and 1.6 ± 0.9 in SPG at final follow-up (P = 0.32). Postoperative complications developed in 8 patients (19%) in STSF and 9 patients (23%) in SPG (P = 0.81). Conclusions: STSF and SPG techniques had comparable complication rate at one-year follow-up. Both techniques were comparable in terms of success rate, postoperative IOP, and glaucoma medications.

Power quality is a major concern in electrical power systems. The power quality disturbances such as sags, swells, harmonic distortion and other interruptions have impact on the electrical devices and machines and in severe cases can cause serious damages. Therefore it is required to recognize and compensate all types of disturbances at an earliest to ensure normal and efficient operation of the power system. To solve these problems, many types of power devices are used. At the present time, one of those devices, Dynamic Voltage Restorer (DVR) is the most efficient and effective device used in power distribution system. In this paper, design and modeling of a new structure of multifunctional DVR for voltage correction is presented. The performance of the device under different conditions such as voltage swell, voltage sag due to symmetrical and unsymmetrical short circuit, starting of motors, and voltage distortion are described. Simulation result shows the superior capability of proposed DVR to improve power quality under different operating conditions. The proposed new DVR controller is able to detect the voltage disturbances and control the converter to inject appropriate voltages independently for each phase and compensate to load voltage through three single- phase transformers.

This qualitative research explores Supplier Relationship Management (SRM) as a pivotal driver of sustainable practices in the e-commerce sector. Through in-depth interviews with industry experts, practitioners, and scholars, the study investigates how SRM strategies integrate sustainability criteria into procurement processes, mitigate environmental and ethical risks, and enhance operational efficiencies. Key findings highlight the strategic importance of collaborative relationships with suppliers, technological innovations such as blockchain and data analytics in promoting transparency and accountability, and the influence of consumer preferences for sustainable products on market dynamics. Despite challenges such as regulatory complexities and global supply chain dynamics, businesses are increasingly adopting sustainable SRM practices to strengthen brand reputation, achieve cost savings, and align with evolving sustainability standards. The study underscores the interconnected nature of sustainability within e-commerce operations and calls for continued research to advance technological solutions, refine regulatory frameworks, and foster industry-wide collaboration. By embracing sustainability as a strategic imperative, businesses can navigate complexities, drive innovation, and contribute to a more resilient and sustainable future for the e-commerce industry.

This research investigates the pivotal role of Supplier Relationship Management (SRM) in enhancing e-commerce scalability. SRM practices are essential for optimizing supply chain operations and fostering strategic partnerships with suppliers, crucial in the dynamic and competitive e-commerce landscape. Through a comprehensive analysis of case studies, expert interviews, and secondary data, the study examines how leading e-commerce companies such as Amazon and Alibaba implement effective SRM strategies to achieve scalability. Key findings reveal that strategic supplier selection based on capabilities and alignment with business goals, coupled with continuous evaluation and development programs, ensures consistent supply chain performance and customer satisfaction. Technological advancements, including data analytics, artificial intelligence, and blockchain, play a transformative role in modern SRM by enhancing transparency, efficiency, and decision-making capabilities. These technologies enable real-time monitoring, automated processes, and risk mitigation strategies that bolster supply chain resilience and operational efficiency. Best practices in SRM, such as clear performance metrics, a culture of continuous improvement, and ethical sourcing policies, are critical for driving supplier accountability, innovation, and sustainability. Moreover, sustainability emerges as a growing priority in SRM, with businesses integrating environmental and social considerations into supplier management strategies to meet regulatory requirements and stakeholder expectations. Theoretical frameworks like the Resource-Based View and Transaction Cost Economics provide insights into the strategic implications of SRM, emphasizing its role in fostering competitive advantage and long-term business success. As e-commerce continues to evolve, businesses must adapt and innovate in their SRM approaches to navigate global supply chain complexities effectively. By prioritizing effective SRM practices, leveraging advanced technologies, and embracing sustainability, businesses can enhance their scalability, resilience, and competitiveness in the digital economy.

This study explores the barriers to adopting green supply chain practices from the perspective of industry leaders. By conducting qualitative interviews with key decision-makers in various sectors, the research uncovers the complexities and challenges faced in integrating sustainable practices into supply chain operations. The findings highlight significant obstacles such as cost implications, lack of regulatory support, technological limitations, and resistance to change within organizations. Additionally, the study reveals that while there is a growing awareness and commitment towards sustainability, practical implementation remains fraught with difficulties. The insights gained from industry leaders provide a nuanced understanding of the multifaceted nature of these barriers, offering valuable guidance for businesses and policymakers aiming to promote greener supply chains.

In contemporary marketing and consumer behavior research, supply chain transparency has emerged as a critical determinant of brand image and consumer trust. This qualitative study explores how transparency in supply chain communication shapes brand perception and influences consumer behavior. Through in-depth interviews with marketing professionals, consumers, and supply chain managers, this research examines the impact of transparent practices on consumer trust, brand loyalty, and market differentiation. Findings reveal that transparent disclosure of sourcing, production methods, and sustainability initiatives enhances consumer perception of brand authenticity and ethical responsibility. Effective communication strategies such as detailed product labeling, interactive digital content, and third-party certifications play a pivotal role in educating consumers and reinforcing brand credibility. Despite the benefits, the study identifies challenges including global supply chain complexity, lack of standardized metrics, and economic considerations associated with transparency implementation. Technological advancements like blockchain and data analytics offer solutions to improve supply chain visibility and traceability, supporting brands in meeting ethical standards and consumer expectations. Moreover, transparency facilitates effective crisis management and reputation recovery by enabling brands to promptly address supply chain issues and maintain consumer trust during disruptions. The research highlights cultural and regional variations in consumer expectations regarding transparency, underscoring the need for brands to tailor communication strategies to local values and preferences. As brands navigate these complexities, prioritizing transparency not only strengthens consumer relationships but also positions them as leaders in ethical business practices. Ultimately, this study contributes to understanding the strategic importance of supply chain transparency in fostering sustainable brand growth and resilience in a competitive global market.

The abstract of the study on the challenges and opportunities of supply chain digitalization encapsulates the primary findings and their implications from the perspectives of industry leaders. This qualitative research investigated how senior executives across diverse sectors perceive and manage the transition to digital supply chains. Interviews with twenty industry leaders revealed key challenges such as data integration, cybersecurity, organizational resistance, and financial constraints. Data integration issues were particularly pronounced, as participants struggled with unifying disparate data sources from legacy and modern systems, creating barriers to achieving cohesive digital frameworks. Cybersecurity emerged as a critical concern due to the increased vulnerability of digital supply chains to cyber threats, necessitating robust and proactive security measures. Organizational resistance, driven by employee apprehensions about job displacement and technological unfamiliarity, highlighted the need for effective change management practices, including clear communication and training. Financial constraints, especially for small and medium-sized enterprises (SMEs), underscored the difficulty of justifying the substantial investments required for advanced digital technologies. Despite these challenges, the study identified significant opportunities associated with digitalization, including enhanced operational efficiency, improved visibility, predictive analytics, and better customer satisfaction. Digital tools were found to streamline processes, reduce manual intervention, and provide real-time insights into supply chain performance, thus facilitating more informed decision-making and swift responses to disruptions. The accelerated adoption of digital technologies during the COVID-19 pandemic demonstrated their essential role in enhancing supply chain resilience and agility. Additionally, the integration of sustainability goals through digitalization supported resource optimization and waste reduction, aligning with broader corporate social responsibility objectives. The findings suggest that while the path to digital transformation is complex, the benefits of improved efficiency, decision-making, customer satisfaction, and sustainability present compelling incentives for organizations to invest in and embrace digital supply chain solutions.

This study investigates the pivotal role of leadership in driving sustainable supply chain initiatives (SSCI), highlighting the multifaceted ways through which leaders influence the successful integration and implementation of sustainability practices within supply chains. Using a qualitative approach, the research involved semi-structured interviews with leaders and managers from diverse industries, complemented by document analysis and thematic analysis to capture the complexities of leadership in SSCI. The findings reveal that visionary leadership, characterized by a clear and compelling sustainability vision, plays a crucial role in aligning organizational goals with sustainable practices, inspiring collective action, and fostering a shared commitment to long-term environmental and social objectives. Stakeholder engagement emerged as a critical factor, with leaders who prioritize open communication and collaboration successfully building trust, leveraging expertise, and co-creating innovative solutions to sustainability challenges. Additionally, the study highlights the importance of fostering a culture of innovation, where leaders support experimentation, risk-taking, and the adoption of new technologies and processes that enhance sustainability. Ethical leadership, emphasizing integrity, transparency, and accountability, is identified as essential for gaining stakeholder support and reinforcing the legitimacy of SSCI. Furthermore, the integration of sustainability into organizational culture, driven by leadership, is crucial for aligning individual and organizational behaviors with sustainability goals. The ability of leaders to navigate challenges, adapt to global supply chain complexities, and utilize robust sustainability metrics is also emphasized as key to sustaining SSCI. The study concludes that effective leadership is integral to the success of SSCI, offering valuable insights for organizations aiming to enhance their sustainability performance and contributing to the broader understanding of leadership’s role in sustainable supply chain management.

This study investigates the impact of integrated marketing strategies on supply chain efficiency in retail businesses. Through qualitative research methods including in-depth interviews and case studies, the study explores how aligning marketing activities with supply chain operations influences various aspects of retail performance. The findings reveal that integrated marketing strategies lead to enhanced demand forecasting accuracy, improved customer satisfaction, and greater operational efficiency. By leveraging technology, such as artificial intelligence and data analytics, retailers can optimize inventory management, personalize offerings, and anticipate consumer preferences in real-time. Cross-functional collaboration and effective leadership emerge as crucial factors in fostering integration and overcoming challenges such as data management and cultural resistance. Additionally, the study highlights the significance of sustainability and entrepreneurship in driving integrated strategies, with implications for long-term competitiveness and brand reputation. The findings underscore the importance of viewing marketing and supply chain functions as interconnected elements of a holistic business strategy, rather than operating in silos. The study offers valuable insights for theory, practice, and future research, emphasizing the need for holistic and collaborative approaches to integration in the dynamic retail landscape. By embracing integrated marketing strategies, retailers can position themselves for success in an increasingly competitive market environment, driving innovation, efficiency, and customer satisfaction.

E-waste management (EWM) refers to the operation-management of discarded or unproductive electronic devices and components, a challenge exacerbated due to overindulgent urbanization. This article presents a multidimensional cost-function-based analysis of the EWM framework structured on three modules - environmental, economic, and social uncertainties - which contemplate the 3 pillars of sustainability in an e-waste recycling plant, including the production-delivery-utilization process. The framework incorporates material recovery from a single e-waste facility provisioning for chemical and mechanical recycling. Each module is ranked using independent Machine Learning (ML) protocols: a) Analytical Hierarchical Process (AHP) and b) combined AHP and Principal Component Analysis (PCA). From a long list of possible contributors, the model identifies and ranks two key sustainability contributors to the EWM supply chain: overall energy consumption and volume of carbon dioxide generated. Another key finding is a precise time window for policy resurrection, which for the data considered, happens to be 400-600 days from the start of operation. Another interesting outcome is the quality of prediction using a combination of AHP and PCA, which consistently produced better results than any of these ML methods individually implemented. Model outcomes have been verified using a case study to outline a future E-waste sustained roadmap.

This paper reviews the pioneering work related to the generation of a sequence of prompts in Pretrained Language Models (PLMs) to automatically complete a complex writing task. The paper identifies the main categories of automated multi-step prompting and discusses their advantages and disadvantages. The paper also proposes an additional approach for automated multi-step prompting with iterative four main phases: in the first phase a sequence of prompts is geared to elicit the structure of the requested task. This is done by identifying the task’s main parts, the general contents of the different parts and their precedence relations. The structure of each main part is iteratively explored to find secondary and tertiary parts if they exist. A second phase is followed by a sequence of prompts that fill in the primary, secondary, and tertiary parts, and seek to fine-tune the result. The third phase reviews the generated text and criticizes it. Based on this criticism a revision is prepared. The fourth phase is fine-tuning the document, with emphasis on section length and text tone. Future research could deal with the system identification of points where the system should initiate interaction with the user for desired feedback and guidance.

Nuclear DNA mutations, mitochondrial DNA mutations, combined nuclear and mitochondrial DNA defects, and random occurrences are the main causes of mitochondrial disease. Black pigmentation loss is a major sign of Parkinsonism. Because of the loss of dopaminergic neurons in the substantia nigra, it drops to less than 80%. The degree of motor impairment was correlated with the amount of black pigmentation loss. After RNA extraction, reverse transcription is carried out because reverse transcriptase was used to create cDNA. One microliter of total RNA supplemented with IORT Buffer, dNTPs, random hexamers, Multi-Scribe Reverse Transcriptase, and nuclease-free was used to create cDNA. The following was how the reaction was carried out in a thermal cycler: 10 minutes at 25°C, 120 minutes at 37°C, 5 seconds at 85°C, and lastly 4°C. The data was expressed as a v-value, which shows how much the target gene is enriched in comparison to the reference gene. Earlier research using mice injected with functional HtrA2/Omi protease activity revealed similar outcomes, including induced up-regulation of CHOP, decreased mitochondrial function, and early brain cell aging because of an increase in mtDNA deletions. The cell viability of the genotypes exhibits a dmg concentration-dependent effect in these results, suggesting that high content ratios of drug treatment with 6-OHDA may be the cause of cellular content depletion. After 6-OHDA neurotoxin treatment, CHOP is up-regulated. Prior in vitro research has shown that treatment with a model based on 6-OHDA neurotoxin causes the activation of mitochondrial stress pathways, which in turn promotes the death of neurons. 6-OHDA reversibly inhibited complexes I and IV's activities in rat brain cells, which led to dopaminergic neurodegeneration, a defining feature of PD pathogens. As a result, the number of living cells will directly correlate with the dmg concentration, supporting the results of the current study. Real-time PCR can generally demonstrate that the removal of HtrA 2 results in a significant up-regulation of Hsp60 expression when compared to WT cells. This could be linked to a decreased threshold for mitochondrial stress in HtrA2 KO cells, which would explain why, following ADEP4 and ACP5 treatment, Hsp60 is significantly up-regulated in HtrA2 KO cells compared to WT cells.

This study presents a critical literature review on the models of users' adoption of blockchain applications in supply chains. This review pertaining to blockchain technology adoption by supply chain stakeholders is significant as it is a pre-requisite for the technical sustainability of blockchain technology in supply chains. Through a critical literature review, the previous studies related to technology adoption models were analyzed to explore practices brought about by blockchain applications for supply chain management. This study examined the suitability of the existing models (e.g., the technology-organization-environment (TOE) framework, task technology fit (TTF), unified theory of acceptance and use of technology (UTAUT)) of technology adoption for blockchain applications in supply chains and came up with a new unified model, namely, TOE-TTF-UTAUT. This review provides implications for a more appropriate research design using mixed methods. When adopting the TOE-TTF-UTAUT model in a study, two phases of research using mixed methods can be performed. The first phase is an exploratory sequential design in which a qualitative approach to explore the TOE and supply chain task constructs is followed by a quantitative approach using a survey and quantitative analyses to investigate the factors affecting blockchain adoption in supply chains. The second phase adopts explanatory sequential design in which the quantitative findings from the first phase are reviewed for follow-up by qualitative interviews to obtain explanations.

As a widely used plastic, the aging and degradation of polyethylene (PE) are inevitable problems, whether the goal is to prolong the life of PE products or address the issue of white pollution. Molecular simulation is a vital scientific tool in elucidating the mechanisms and processes of chemical reactions. To obtain the distribution and evolution process of PE's thermal oxidation products, this work employs the self-consistent charge density functional tight binding (SCC-DFTB) method to perform molecular simulations of the thermal oxidation of PE with different crystallinity and branched structures. We discovered that crystallinity does not affect the thermal oxidation mechanism of PE, but higher crystallinity makes PE more susceptible to cross-linking and carbon chain growth, reducing the degree of PE carbon chain breakage. The branched structure of PE results in differences in pore size between the carbon chains, with larger pores leading to a concentrated distribution of O2 and free radicals subsequently formed. The breakdown of PE is slowed down when free radicals are localized in low-density regions of the carbon chain. The specifics and mechanism of PE's thermal oxidation are clearly revealed in this paper, which is essential for understanding the process in-depth and for the development of anti-aging PE products.

Skeletal muscles are crucial for voluntary movements, and impairments in their function significantly impact our activity. Dysferlin, a protein predominantly present in skeletal muscle, is a focal point of extensive research due to its vital role in muscle repair and maintenance. This study investigates Dysferlin's levels and function in skeletal muscles, emphasizing its significance and the potential effects of its dysregulation on fast and slow muscle fibers. We employed Western blotting on two different rat muscles. The results revealed distinct expressions of Dysferlin in fast and slow fibers, as demonstrated by Western blotting. We propose that Dysferlin may have a metabolic role in addition to its involvement in the repair mechanism.

Environmental responsibility and economic benefits have promoted the development of closed-loop supply chain (CLSC), and shortages and channels are considered to be two important issues in CLSC. This paper explores ordering and channel decisions in CLSC with new and differentiated remanufactured products, and considers the price and sales effort-dependent demands, as well as the proportion of emergency orders determined by emergency order costs and backorder losses, and establishes an integrated and decentralized CLSC game models. We introduce a stochastic sales effort, which affects two types of products. Numerical results show that sales effort and the order quantity of new and remanufactured products exhibit concave and convex functions, respectively. Wherein, the upper limit of sales effort has a greater impact on supply chain decisions. High sales efforts can serve as a means of coordinating dispersed supply chains. Moreover, in different cases, decisions of integrated channel are better than those of decentralized channel. Finally, whether the supply chain adopts an emergency order strategy depends on the relative cost of emergency orders and out of stock costs. According to the research in this article, some management insights are also provided.

The overhead squat movement engages various bodily structures, and its interaction with three-dimensional elastic resistance along the kinetic chain approach remains insufficiently comprehended. This study aimed to describe the scapular kinematics during an overhead squat with the forearm in a supination exercise against an ER and clarify the therapeutic potential of this exercise on scapular rehabilitation. Using an electromagnetic tracking system, we recorded the three-dimensional shoulder kinematics of 19 male participants across seven humeral elevation positions. These positions were captured at 15-degree intervals, spanning from 30 to 120 degrees. The results indicated notable distinctions in scapular upward rotation [F(1,17)=6.09, p=0.024] and scapular posterior tilt [F(1,17)=6.04, p=0.025] between the phases. Furthermore, the interactions revealed significant differences in resistance and phases during humeral elevation for scapular upward/downward rotation [F(3.77,62.48)=7.99, p&lt;0.001], scapular internal/external rotation [F(2.98, 50.64, p&lt;0.001)], and scapular tilt [F(2.58, 43.81)=4.76, p=0.008]. The findings demonstrated that increasing resistance through elastic resistance played a pivotal role in enhancing scapular stability throughout the humerus elevation motion. This underscores the potential of the overhead squat movement as a valuable tool for both shoulder assessment and treatment.

A The guinea pig value chain in Jauja, Peru, has been developed through the application of productive projects, institutional strengthening and implementation of the principles of responsible investment in agriculture and food systems (CFS-RAI). The actors in this chain have been showing economic improvements, representativeness and participation, characteristics that make them the key human capital for development. To improve the performance of the actors in the sustainable rural development of the territory of Jauja, Peru, the research carried out an evaluation of the competencies and capacities for project management in 46 actors linked to the business programme on the CFS-RAI Principles, representing 1,094 people in the guinea pig value chain in Jauja, using the Working With People (WWP) model and empirical instruments based on the Octagon method, International Project Management Association (IPMA) competencies, performance evaluation carried out by experts, attitudinal evaluation and the Business Model Canvas. The results have helped to structure the actors of the value chain, who show an intermediate mastery of project management competencies (2.73/5), institutional capacities in development (2.89/7) and a growing organizational management performance (26.2/100). In addition, trust and proactivity have been generated among the actors in the chain, with an interest in continuing with the implementation of the CFS-RAI Principles in order to achieve sustainability in their productive projects with commercial innovation. The results have allowed us to generate the design of an innovative programme for the development of competencies, which balances the three dimensions of IPMA competencies (perspective, person and practice) in connection with the CFS-RAI Principles. Both processes complement the strengthening of human capital in agrifood value chains through sustainable project management and contributing to sustainable development in the region.

This study takes a two-echelon agricultural products supply chain (APSC) composed of an agricultural product processor (processor) and an agricultural product supermarket (supermarket) as the research object. In order to ensure the stable supply of high-quality agricultural products, this paper considers both fairness concern and corporate social responsibility (CSR), and establishes four Stackelberg game models with or without considering fairness concern and CSR, and obtains the influence mechanism of fairness concern and CSR on bilateral quality efforts in APSC through comparative analysis and numerical analysis. Research shows that the supermarket’s fairness concern can take the role of "profit distribution mechanism", but it is not conducive to improving bilateral quality efforts resulting in the inability to improve market demand, and it is not conducive to improving the utility of the supply chain system and consumer surplus; both members of APSC sharing CSR can not only improve the quality of agricultural products and promote the expansion of market demand, but also can achieve Pareto improvement of both profit of all members and supply chain system. Besides, The CSR shared by both members has a greater impact on bilateral quality efforts decision than the supermarket’s fairness concern, and thus the positive effect of CSR can overcome the negative effect of supermarket’s fairness concern.

Polymerase chain reaction (PCR) technique is one of the molecular methods in amplifying DNA for the detection of malaria. However, the limitations of PCR especially when used for routine clinical practice can hamper its sensitivity and specificity. With that, this study focuses on designing a microfluidic device that will mimic the function of a conventional genus-specific PCR based on 18S rRNA gene to detect malaria parasites (Plasmodium falciparum) at low grade parasitemia. The design was drawn and simulated using ANSYS 14.5 Computational Fluid Dynamics (CFD). The simulation shows that adding loops to the design increases its relative deviation but to a minimal extent as compared to having only a straight path design, which indicates that looping is acceptable in designing a microfluidic device to minimize chip length. Also, increasing the cross-sectional area of the fluid path decreases the efficiency of the design, thus, the design with a relatively smaller cross-sectional area is favored. And lastly, among the three materials utilized, the chip made of polypropylene is the most efficient with a relative deviation of 0.94 as compared to polycarbonate and polydimethylsiloxane which have relative deviations of 2.78 and 1.92, respectively.

Supply Chain Management (SCM) encompasses a wide variety of decision-making problems that affect business and supply chain performance as a whole. Since most of these problems involve uncertainty and hesitation on the part of Decision Makers (DMs), various studies have emerged recently that present SCM applications of techniques based on Hesitant Fuzzy Linguistic Term Sets (HFLTSs) and HFLTS extensions. Given the relevance of this subject and the lack of literature review studies, this study presents a systematic review of HFLTS and HFLTS extension applications to SCM decision-making problems. In order to answer a set of research questions, the selected papers have been classified in accordance with a group of factors that are pertinent to the origins of these studies, SCM, HFLTSs, and decision-making. The results demonstrate that the Source and Enable processes have been studied with greater frequency, while the most common problems have to do with supplier selection, failure evaluation, and performance evaluation. The companies of the automotive sector and Sustainable SCM and Green SCM strategies predominate in the analyzed studies. Even though most of the studies use techniques based on HFLTSs, we have identified applications of seven distinct HFLTS extensions, with Double Hierarchy Hesitant Fuzzy Linguistic Term Sets and Probabilistic Linguistic Term Sets being the most utilized. The identification of gaps in the literature presents avenues for future studies focused on innovative applications, integrations of techniques, comparisons of techniques, group decision-making, and validation procedures for new models. The results of this study offer a panorama of the state of the art in regard to this subject and can help researchers and practitioners develop new studies which involve the use of methods that employ HFLTSs and HFLTS extensions in SCM decision-making problems.

Plant flavonoids have increasingly paid a close attention to for new antimicrobial agents or adjuvants. In our previous work, it was confirmed that the cell membrane is the major site of plant flavonoids acting on the gram-positive bacteria, and which likely involves the inhibition of the respiratory chain. Inspired by the similar structural and antioxidant characters of plant flavonoids to MKH₂, we deduced that the quinone pool is probably a key target of plant flavonoids inhibiting gram-positive bacteria. To verify this, twelve plant flavonoids with six structural subtypes were preliminary selected, and their MICs against gram-positive bacteria were predicted from the antimicrobial quantitative relationship of plant flavonoids to gram-positive bacteria. The results showed they have different antimicrobial activities. After their MICs against S. aureus were determined using broth microdilution method, nine compounds with the MICs ranged from 2 to 4,096 μg/mL or more than 1,024 μg/mL were eventually selected, and then their MICs against S. aureus were determined interfered with different concentrations of MK-4 and the MKs extracted from S. aureus. The results showed that the greater the antibacterial activities of plant flavonoids were, the more greatly their antibacterial activities decreased along with the increase of the interfering concentrations of MK-4 (from 2 to 256 μg/mL) and MK extract (from 4 to 512 μg/mL), and while those, with the MICs equal to or more than 512 μg/mL, decreased a little or remained unchanged. Especially, under the interference of MK-4 (256 μg/mL) and MK extract (512 μg/mL), the MICs of α-mangostin, a compound with greatest inhibitory activity to S. aureus in these twelve plant flavonoids, increased by 16 times and 8 to16 times, respectively. Based on these above, it was proposed that the quinone pool is a key target of plant flavonoids inhibiting gram-positive bacteria, and which likely involves multiple mechanisms including some enzyme and non-enzyme inhibitions.

With the continuous growth of electric and electronic appliances’ usage, the waste produced with obsolete material (e-waste) has an increasing environmental impact. Also, the production of such appliances bears to increased consumption of natural resources and produces a multitude of toxic and hazardous substances, which typically are not properly treated. One of the approaches that may be adopted to reduce such problems relies on the circularization of the current linear model, commonly adopted in the EEE value chain. This includes recovering eol products and reintroducing its parts, components, or raw materials into the value chain (e.g. semiconductors, circuit boards, raw metals, etc.), thus contributing to a more sustainable value chain. In this article, we present a state-of-art review that focuses on approaches and solutions for the EEE value chain traceability, and analyses the technologies that may be beneficial for promoting and implementing the CE model in this value chain.

The opioid crisis in the United States has had devastating effects on communities across the country, leading many states to pass legislation that limits the prescription of opioid medications in an effort to reduce the number of overdose deaths. This study evaluates the impact of two categories of PDMP and Pill Mill regulations on the supply of opioid prescriptions at the level of dispensers and distributors (excluding manufacturers) using ARCOS data. The study uses a difference-in-difference method with a two-way fixed design to analyze the data. The study finds that both of the regulations are associated with reductions in the volume of opioid distribution. However, the study reveals that these regulations may have unintended consequences, such as shifting the distribution of controlled substances to neighboring states. For example, in Tennessee, the implementation of Operational PDMP regulations reduces in-state distribution of opioid drugs by 3.36% (95% CI, 2.37 to 4.3), while the out-of-state distribution to Georgia, which did not have effective PDMP regulations in place, increases by 16.93% (95% CI, 16.42 to 17.44). Our studies emphasize that policymakers should consider the potential for unintended distribution shifts of opioid drugs to neighboring states with laxer regulations as well as varying impacts on different dispenser types.

Non-timber forest products (NTFP) have contributed in various ways to the living, livelihoods, and trading of households and communities who live in rural and urban areas all over the world. This paper analyses the value chain of Jiaogulan (Gynostemma pentaphyllum) in the Cao Bang Geopark, Vietnam. 106 actors were surveyed using a semi-structured questionnaire: experts (agricultural extension officers, farmers' associations), harvesters, traders, primary processors, processors, distributors, and consumers. The results show that a map of Jiaogulan value chain, value added of households in main market channels, and impact of value added and distribution of Jiaogulan products on household income.

The Impact Chain framework for risk assessment has proven to be a robust and effective It is very useful to set up the conceptual framework associated to a given risk and allows accommodating naturally the different components that shape that However, the operationalization of the impact chain may not be straightforward, in particular due to the inherent uncertainties associated to the selected indicators and the assigned In this paper, we introduce an extension to the Impact Chain framework that allows to consider uncertainties in the different components of the risk In the framework of the UNCHAIN project, a web-based tool has been developed to ease the task of implementing that The tool has been applied to a case study on the loss of tourist attractiveness due to heat stress conditions on the Balearic island, Spain, to illustrate how uncertainties in different components of the impact chain can affect the robustness of the final risk Also, the tool provides an estimate of the sensitivity of the final risk to each component, which can be used to guide risk mitigation Finally, a proposal for the validation of the risk assessment is presented.

Background: Wolbachia sp. is an endosymbiotic bacterium that is widespread among arthropods and filarial nematodes. It affects the fertility and maturation of its arthropod hosts, which in some cases are vectors of infectious diseases of humans and animals. Acanthocheilonema reconditum is a canine filarial nematode, which can eventually infect humans through arthropods. An outbreak of A. reconditum has been reported recently in dogs in the southwest of Colombia, specifically in Cali. In addition, Wolbachia sp. is currently used for the biological control of the mosquito Aedes egypti in cities in the north and south-west of Colombia. Aedes egypti is a vector of dengue fever, a major public health disease in tropical and subtropical areas of the world. The objectives of this study were to detect Wolbachia sp. in mosquito and flea samples collected from dogs in southwestern Colombia and to determine the co-infection of Wolbachia sp. and A. reconditum in the recent outbreak of canine filariasis in Santiago de Cali. Methods: A total of 18 mosquitoes of the genera Aedes and Culex and 18 Ctenocephalides felis fleas were collected in Santiago de Cali and nearby municipalities. DNA was extracted and 16S rRNA and ftsZ gene fragments were identified using conventional and nested polymerase chain reaction. In addition, the presence of Wolbachia sp. was analyzed in 55 cases positive for A. reconditum previously detected in the city, using the same molecular techniques. Results: From the analysis of 18 mosquitoes and 18 fleas, using molecular techniques based on the 16S rRNA and ftsZ genes, Wolbachia sp. was detected in all the arthropods analyzed. Wolbachia sp. was not detected in the samples obtained from dogs infected with A. reconditum. Conclusions: Molecular analyses were shown to be effective for the identification of Wolbachia sp. in mosquitoes and fleas but not in samples positive for A. reconditum.

Seismic travel time tomography using surface waves is an effective tool for three-dimensional crustal imaging. Historically, these surface waves are the result of active seismic sources or earthquakes. More recently, however, also surface waves retrieved through the application of seismic interferometry are exploited. Conventionally, two-step inversion algorithms are employed to solve the tomographic inverse problem. That is, a first inversion results in frequency-dependent, two-dimensional maps of phase velocity, which then serve as input for a series of independent, one-dimensional frequency-to-depth inversions. As such, a two-dimensional grid of localized depth-dependent velocity profiles are obtained. Stitching these separate profiles together subsequently yields a three-dimensional velocity model. Relatively recently, a one-step three-dimensional non-linear tomographic algorithm has been proposed. The algorithm is rooted in a Bayesian framework using Markov chains with reversible jumps, and is referred to as transdimensional tomography. Specifically, the three-dimensional velocity field is parameterized by means of a polyhedral Voronoi tessellation. In this study, we investigate the potential of this algorithm for the purpose of recovering the three-dimensional surface-wave-velocity structure from ambient noise recorded on and around the Reykjanes Peninsula, southwest Iceland. To that end, we design a number of synthetic tests that take into account the station configuration of the Reykjanes seismic network. We find that the algorithm is able to recover the 3D velocity structure at various scales in areas where station density is high. In addition, we find that the standard deviation on the recovered velocities is low in those regions. At the same time, the velocity structure is less well recovered in parts of the peninsula sampled by fewer stations. This implies that the algorithm successfully adapts model resolution to the density of rays. Also, it adapts model resolution to the amount of noise on the travel times. Because the algorithm is computationally demanding, we modify the algorithm such that computational costs are reduced while sufficiently preserving non-linearity. We conclude that the algorithm can now be applied adequately to travel times extracted from (time-averaged) station-station cross correlations by the Reykjanes seismic network.

The conformational preferences of the ester group have the potential to facilitate the large amplitude folding of long alkyl chains in the gas phase. They are monitored by Raman spectroscopy in supersonic jet expansions for the model system methyl butanoate, after establishing a quantitative relationship to quantum-chemical predictions for methyl methanoate. This requires a careful analysis of experimental details, and a simulation of the rovibrational contours for near-symmetric top molecules. The technique is shown to be complementary to microwave spectroscopy in quantifying coexisting conformations. It confirms that a C-O-C(=O)-C-C chain segment can be collapsed into a single all-trans conformation by collisional cooling, whereas alkyl chain isomerism beyond this five-membered chain largely survives the jet expansion. This sets the stage for the investigation of linear alkyl alkanoates in terms of dispersion-induced stretched-chain to hairpin transitions by Raman spectroscopy.

Traditional travel agencies and tour operators are recognized as relevant stakeholders in the tourism distribution chain, even though their role as transforming agents in the achievement of more sustainable tourism is beginning to be accepted. This document collects the main topics and the most recent approaches from the academic literature in its analysis of Corporate Social Responsibility (CSR) practices developed by these intermediaries. The work has been structured around six recurring themes in most of the studies carried out: the new intermediaries that operate on the Internet; the role of travel agencies and tour operators in tourism sustainability; the influence of the size of the company; CSR as a disruptive innovation in this sector; the potential of the sustainable tourism supply chain; and the motivations and attitudes of the managers of these businesses when they engage with responsibility. This last topic is developed in greater detail since it is closely linked to the previous ones and dictates in most cases the meaning and function of the sustainable performance.

China is one of the world’s most important countries for waterfowl because of the large amount of potential habitat and its position along major migratory routes. Waterfowl poaching in China is a serious threat, and for over twenty years colleagues and I have tracked waterfowl poaching in China including hunting methods, trade routes and prices involved. According to the latest survey of a NGO, 11.8% of Chinese people have participated in wildlife consumption, and about 32.0% of people have seen wildlife consumption (Not necessarily involved in killing and eating the wildlife). The survey results come from 100 000 internet questionnaires. The current report provides an update focusing on waterfowl poaching in Xinjiang Province of the northwest China, where is highly pathogenic area on the avian influenza, SARS and the Wuhan coronavirus pneumonia (such as COVID-19). The cases in 2011, 2012, and 2014 involved about 1816 to 2760 birds of more than 20 species, with an estimated total of 200 000 wild birds being hunted by a group per year in Xinjiang. Strangely, the poacher was not punished by any law. We know a few waterfowl species are protected as a list of Key Protected Species in China, and hopefully this report will draw attention to the scope of waterfowl poaching in China. China has made great progress with protecting other wildlife, and hopefully more can be done to protect migrating waterfowl.

The purpose of this paper is to explore which financial performance indicators (FPIs) evaluate the level of supply chain capability (SCC) that explicitly touches all of the business functions and processes within and beyond the company. The authors investigated nine FPIs that were selected from the financial statements of 155 companies within nine industries. The authors find that suitable FPIs to measure SCC for shareholders’ value are return-on-assets (ROA), days-sales-outstanding (DSO), and current ratio (CR). This means that higher ROA, shortened DSO, and an appropriate level of CR could reach a sustainable supply chain. These results will help the industry to avert a major disruption in supply chain processes and activities using suitable financial performance indicators.

This paper investigates the contribution of business model innovations in improvement of food supply chains. Through a systematic literature review, the notable business model innovations in the food industry are identified, surveyed, and evaluated. Findings reveal that the innovations in value proposition, value creation processes, and value delivery processes of business models are the successful strategies proposed in food industry. It is further disclosed that rural female entrepreneurs, social movements, and also urban conditions are the most important driving forces inducing the farmers to reconsider their business models. In addition, the new technologies and environmental factors are the secondary contributors in business model innovation for the food processors. It is concluded that digitalization has disruptively changed the food distributors models. E-commerce models and internet of things are reported as the essential factors imposing the retailers to innovate their business models. Furthermore, the consumption demand and the product quality are two main factors affecting the business models of all the firms operating in the food supply chain regardless of their positions in the chain. The findings of the current study provide an insight into the food industry to design a sustainable business model to bridge the gap between food supply and food demand.

Blockchain is a data management innovation that allows the linkage of successive records regarding a digital entity, and to store them into a shared, decentralized, distributed and retroactively unchangeable data structure. Each bit of information related to the recorded events contains the public key of the owner, therefore, the whole record is formed by a chain of transactions with blocks of information identifying where the transaction was generated from and its current destination (Nakamoto, 2008). Blockchain is the technology behind Bitcoin, an online currency that was first introduced in 2009. The technology makes it possible to conduct business between members within the network without relying on third parties as guarantors to prove transaction integrity, thus increasing speed and reducing cost of transaction. Moreover, the transparency posed by the technology makes it possible to trace goods and services through all stages, making the technology a unique tool that can be assimilated by, for example, the Agro-food supply chain systems. Specifically, Blockchain is being tested in a pilot project in the UK meat (Beef) industry by the FSA (Food Standards Agency) and the slaughterhouses, with IBM Blockchain platform to ensure full transparency and compliance with regulations, (Evenstad, 2018). However, the uptake of Blockchain in the fresh produce (fresh and fresh, short-life processed fruit, vegetables, salads) supply chain is lagging, in the United Kingdom, and remains untested and limited to literature, models and specific case studies in the United States of America and France. The study aims at understanding how prepared stakeholders are in adopting Blockchain for their operations. An inductive qualitative method was employed through non-structured interviews with three companies and one consumer focus group. The interviews were guided by seven (7) open-ended questions, which were unstructured. The collected data was analyzed with axial coding through constant comparative methods. Seven (7) themes were identified as factors influencing the adoption of Blockchain in the fresh produce supply chain in the UK. These are, novelty of the technology, complexity of the fresh produce supply chain in UK, level of product transformation, technological compatibility with operations, cost and value, Customer (retailer) push for adoption, and public/consumers opinion. The adaptation of Blockchain by the current fresh produce supply chain in the UK and the EU at large will come about when concerns on Novelty, and complexity of supply chain systems are fully addressed.

Recycling waste products is an environmental-friendly activity that can bring benefits to accompany, saving manufacturing costs and improving economic efficiency. For the beer industry, recycling bottles can reduce manufacturing costs and reduce the industry's carbon footprint. This paper presents a model for a multi-objective collection-distribution center location and allocation problem in a closed loop supply chain for the beer industry, in which the objective is to minimize total costs and transportation pollution. Uncertainties in the form of randomness and fuzziness are jointly handled in this paper to ensure a more practical problem solution, for which returned bottle sand unusable bottles are considered fuzzy random variables. A heuristic algorithm based on priority-based global-local-neighbor particle swarm optimization (pb-glnPSO) is applied to ensure reliable solutions for this NP-hard problem. A case study on a beer operation company is conducted to illustrate the application of the proposed model and demonstrate the priority-based global-local-neighbor particle swarm optimization.

Although, promotion of urbanization culture in recent decades has made inevitable development of cities in the world, however, the development can be guided in a direction that leave, to the extent possible, minimum socioeconomic and environmental impacts. For this, it is required to first forecast auto-spreading orientation of cities and suburbs in rural areas over time and then avoid shapeless growth of cities. This paper is an attempt to develop a dynamic hybrid model based on logistic regression (LR), Markov chain (MC), and cellular automata (CA) for prediction of future urban sprawl in fast-growing cities. The model was developed using 12 widely-used urban development criteria, whose significant coefficient was determined by logistic regression, and validated by relative operating characteristic (ROC) analysis. The validated model was run in Guilan, a tourist province in northern Iran with a very high rate of urban development. For this, changes in the area of urban land use were detected over the period of 1989 to 2013 and then, future sprawl of the province was forecasted by the years 2025 and 2037. The analysis results revealed that the area of urban land use was increased by more than 1.7 % from 36012.5 ha in 1989 to 59754.8 ha in 2013, and the area of Caspian Hyrcanian forestland was reduced by 31628 ha. The results also predicted an alarming increase in the rate of urban development in the province by the years 2025 and 2037, during which urban land use is predicted to develop 0.9 % and 1.38 %, respectively. The development pattern is expected to be uneven and scattered, without following any particular direction. The development will occur close to the existing or newly-formed urban basements as well as around major roads and commercial areas. This development, if not controlled, will lead to the loss of 13863 ha of Hyrcanian forests and if the trend continues, 21013 ha of Hyrcanian forests and 20208 ha of Barren/open lands are expected to be destroyed by the year 2037. In general, the proposed model is an efficient tool for the support of urban planning decisions and facilitates the process of sustainable development of cities by providing decision-makers with an overview on future development of cities where the growth rate is very fast.

Scholars of the English Literature unanimously say that J.R.R. Tolkien and C.S. Lewis influenced each other writings. For the first time we have investigated this issue mathematically by using an original multi–dimensional analysis of linguistic parameters, based on surface deep–language variables and linguistic channels. To set our investigation in the framework of the English Liter-ature, we have considered some novels written by earlier authors, such as C. Dickens, G. Mac-Donald and others. The deep–language variables and the linguistic channels, discussed in the paper, are likely due to writers’ unconscious design and have revealed connections between texts far beyond writers’ awareness. In summary, the capacity of the extended short–term memory required to readers, the universal readability index of texts, the geometrical representation of texts and the fine tuning of linguistic channels within texts – all tools largely discussed in the paper – have revealed strong connections between The Lord of the Rings (Tolkien), The Chronicles of Narnia, The Space Trilogy (Lewis) and novels by MacDonald, therefore in agreement with what scholars of the English Literature say.

Accurate streamflow forecasting is crucial for effectively managing water resources, particularly in countries like Colombia, where hydroelectric power generation significantly contributes to the national energy grid. Although highly interpretable, traditional deterministic, physically-driven models often suffer from complexity and require extensive parameterization. Data-driven models like Linear Autoregressive (LAR) and Long Short-Term Memory (LSTM) networks offer simplicity and performance but cannot quantify uncertainty. This work introduces Sparse Variational Gaussian Processes (SVGPs) for forecasting streamflow contributions. The proposed SVGP model reduces computational complexity compared to traditional Gaussian Processes, making it highly scalable for large datasets. The methodology employs optimal hyperparameters and shared inducing points to capture short-term and long-term relationships among reservoirs. Training, validation, and analysis of the proposed approach consider the streamflow dataset from 23 geographically dispersed reservoirs recorded during twelve years in Colombia. Performance assessment reveals that the proposal outperforms baseline Linear Autoregressive (LAR) and Long Short-Term Memory (LSTM) models in three key aspects: adaptability to changing dynamics, provision of informative confidence intervals through Bayesian inference, and enhanced forecasting accuracy. Therefore, the SVGP-based forecasting methodology offers a scalable and interpretable solution for multi-output streamflow forecasting, thereby contributing to more effective water resource management and hydroelectric planning.

The mathematical structure underlying a sentence is made of two independent processing units in series. The conditional probability density function of sentence length (measured in words) recordable in the extended short–term memory (E–STM) buffer made of CF cells is Gaussian. The number of sentences that authors of Italian and English Literatures have written is compared to that theoretically available to them. The multiplicity factor α describes this comparison. α&gt;1 is more likely than α&lt;1 and often α≫1, therefore the same sentence pattern is reused many times. These texts are easier to read. Very few novels show α&lt;1. In these cases, there are enough diverse sentence patters to convey meaning, but most of them are not used. Texts are more difficult to read, as measured by a universal readability index GU. A mismatch index IM synthetically describes the process. α, GU. and IM increase with year of publication. Future work will concern other literatures – including ancient ones as Greek and Latin – to confirm what, in our opinion, is general feature of human mind.

A simple bounded stochastic motion is employed for modelling equity price dynamics under shocks, where the prices are constrained to lie between two positive bounds. While the stochastic process has an inaccessible boundary, the other boundary is quasi-bounded, implying that the boundary can be breached if the probability leakage condition is met. The quasi-boundedness of the process at the boundary can thus provide an indicator of possible risk of equities under price shocks. Empirical calibration of model parameters of the proposed process for equities can be performed easily due to the availability of an analytically tractable probability density function which generates fat-tailed distributions consistent with empirical observations. The volatility and mean-reversion of the S&P500 dynamics calibrated by the process is positively and negatively co-integrated respectively with the VIX index representing the level of market distress. The process captures the high likelihood of Hertz’s default about two months earlier, using only information until that point, and before the firm filed for Chapter 11 bankruptcy in May 2020 as a result of the Covid-19 pandemic. Empirical calibration of the process for GameStop’s stock price shows that the short squeeze of the stock occurred when the condition for breaching an upper boundary was met on 14 January 2021, i.e., about two weeks before major short sellers closed out their positions with significant losses. The trading volume of the stock was positively co-integrated with the probability leakage ratio.