The system identification problem with multiple nonlinearities is relevant. Its decision depends on many factors. These include: feedbacks, the method of connecting nonlinear links, signal properties. They affect the identifiability of the system parameters. We introduced a condition for the excitation constancy for state variables, which considers the S-identifiability of the system. We propose system decomposition by measuring input to identify parameters. Each subsystem has an implicit identification representation. It guarantees obtaining estimates of subsystem parameters based on experimental data. The trajectories boundedness of adaptive system proved in parametric and coordinate spaces. Conditions guaranteeing exponential stability of the system obtained. Systems of self-oscillation generation and nonlinear correction of a nonlinear system consider. Conditions for the trajectories boundedness of the adaptive system obtained for these cases. The influence of nonlinearity and feedback on the system performance estimated.

Parasitic capacitance represents the main error source in measurement systems based on electrical impedance spectroscopy. The capacitive nature of electrodes’ impedance in tetrapolar configuration can give origin to phase errors when electrodes are coupled to parasitic capacitances. Nevertheless, reactive charges in tissue excitation systems are susceptible to instability. Based on such a scenario, mitigating capacitive effects associated with the electrode is a requirement in order to reduce errors in the measurement system. A literature review about the main compensation techniques for parasitic capacitance was carried out. The selected studies were categorized into three groups: (i) compensation in electronic instrumentation; (ii) compensation in measurement processing, and (iii) compensation by negative impedance converters. The three analyzed methods emerged as effective against fixed capacitance. No method seemed capable of mitigating the effects of electrodes’ capacitance, that changes in the frequency spectrum. The analysis has revealed the need for a method to compensate varying capacitances, since electrodes’ impedance is unknown.

This research presents a maximum power point tracking of traditional single-ended primary converter (SEPIC) with the aid of fuzzy logic controller (FLC) for regulating the voltage and perturbation and observation(P&O) algorithms for regulating the reference voltage and reaching the maximum power point tracking. This is a promising technique for the conventional SEPIC converter to achieve maximum power point tracking with much less error. Moreover, the method is simple, reliable, and understandable for photovoltaic systems.

This short report contains a result that characterizes almost global pullback attractor of discrete-time non-autonomous systems. Analogously to the multiple Lyapunov functions approach for switched systems, we show here that existence of multiple Lyapunov densities implies pullback convergence of almost all initial states to the origin for a discrete-time non-autonomous system.

Formulation is an ancient concept, although the word has been used only recently. The first formulations made our civilization advance by inventing bronze, steel, and gunpowder; then, it was used in medieval alchemy. When chemistry became a science and with the golden age of organic synthesis, the second formulation period began. This made it possible to create new chemical species and new combinations “à la carte.” However, the research and developments were still carried out by trial and error. Finally, the third period of formulation history began after World War II, when the properties of a system were associated with its ingredients and the way they were assembled or combined. Therefore, the formulation and the systems’ phenomenology were related to the generation of some synergy to obtain a commercial product. Winsor’s formulation studies in the 1950s were enlightening for academy and industries that were studying empirically surfactant-oil-water (SOW) systems. One of its key characteristics was how the interfacial interaction of the adsorbed surfactant with oil and water phases could be equal by varying the physicochemical formulation of the system. Then, Hansen’s solubility parameter in the 1960s helped to reach a further understanding of the affinity of some substances to make them suitable to oil and water phases. In the 1970s, researchers such as Shinoda and Kunieda, and different groups working in Enhanced Oil Recovery (EOR), among them Schechter and Wade’s group at the University of Texas, made formulation become a science by using semiquantitative correlations to attain specific characteristics in a system (e.g., low oil-water interfacial tension, formulation of a stable O/W or W/O emulsion, or high-performance solubilization in a bicontinuous microemulsion system at the so-called optimum formulation). Nowadays, over 40 years of studies with the hydrophilic-lipophilic deviation equation (HLD) have made it feasible for formulators to improve products in many different applications using surfactants to attain a target system using HLD in its original or its normalized form, i.e., HLDN. Thus, it can be said that there is still current progress being made towards an interdisciplinary applied science with numerical guidelines. In the present work, the state-of-the-art of formulation in multiphase systems containing two immiscible phases like oil and water, and therefore systems with heterogeneous or micro-heterogeneous interfaces, is discussed. Surfactants, from simple to complex or polymeric, are generally present in such systems to solve a wide variety of problems in many areas. Some significant cases are presented here as examples dealing with petroleum, foods, pharmaceutics, cosmetics, detergency, and other products occurring as dispersions, emulsions, or foams, that we find in our everyday lives.

A detection system, modeled in a graph, uses "detectors" on a subset of vertices to uniquely identify an "intruder" at any vertex. We consider two types of detection systems: open-locating-dominating (OLD) sets and identifying codes (ICs). An OLD set gives each vertex a unique, non-empty open neighborhood of detectors, while an IC provides a unique, non-empty closed neighborhood of detectors. We explore their fault-tolerant variants: redundant OLD (RED:OLD) sets and redundant ICs (RED:ICs), which ensure that removing/disabling at most one detector guarantees the properties of OLD sets and ICs, respectively. This paper focuses on constructing optimal RED:OLD sets and RED:ICs on the infinite king's grid, and presents the proof for the bounds on their minimum densities; [3/10, 1/3] for RED:OLD sets and [3/11, 1/3] for RED:ICs.

Carbon dots (C-dots) represent an emerging class of non-toxic nano-emitters that show excitation wavelength dependent photoluminescence (PL) with high quantum yield (QY) and minimal photobleaching. The vast majority of studies focus on C-dots that exhibit the strongest PL emission in the blue/green region of the spectrum, while longer wavelength emissions are ideal for applications such as bioimaging, photothermal and photodynamic therapy and light emitting diodes. Effective strategies to modulate the PL emission of C-dot based systems towards the red end of the spectrum rely on extensive conjugation of sp2 domains, heteroatom doping, solvatochromism, surface functionalization and passivation. Those approaches are systematically presented in this review, while emphasis is given on important applications of red-emissive suspensions, nanopowders and polymer nanocomposites.

In software development, developers received bug reports that describe the software bug. Developers find the cause of bug through reviewing the code and reproducing the abnormal behavior that can be considered as tedious and time-consuming processes. The developers need an automated system that incorporates large domain knowledge and recommends a solution for those bugs to ease on developers rather than spending more manual efforts to fixing the bugs or waiting on Q&A websites for other users to reply to them. Stack Overflow is a popular question-answer site that is focusing on programming issues, thus we can benefit knowledge available in this rich platform. This paper, presents a survey covering the methods in the field of mining software repositories. We propose an architecture to build a recommender System using the learning to rank approach. Deep learning is used to construct a model that solve the problem of learning to rank using stack overflow data. Text mining techniques were invested to extract, evaluate and recommend the answers that have the best relevance with the solution of this bug report.

The landscape of centralized cloud computing is now changing to distributed and decentralized clouds with promising impacts on energy consumption, resource availability, resilience, and customer experience. This research highlights the impacts of emerging IT trends, namely, 5G wireless technology, blockchain, and industrial Artificial Intelligence (AI) in development and realization of the next generation of cloud computing. Integration of these technologies in cyber-physical system and cloud manufacturing paradigms is explained and a unified edge-fog-cloud architecture is proposed for successful implementation in manufacturing systems.

The increasing number of robots around us will soon create a demand for connecting these robots in order to achieve goal-driven teamwork in heterogeneous multi-robot systems. In this paper, we focus on robot teamwork specifically in dynamic environments. While the conceptual modeling of multi-agent teamwork has been studied extensively during the last two decades, related engineering concerns have not received the same degree of attention. Therefore, this paper makes two contributions. The analysis part discusses general design challenges that apply to robot teamwork in dynamic application domains. The constructive part presents a review of existing engineering approaches for challenges that arise with dynamically changing runtime conditions. An exhaustive survey of robot teamwork aspects would be beyond the scope of this paper. Instead, we aim at creating awareness for the manifold dimensions of the design space and highlight state-of-the-art technical solutions for dynamically adaptive teamwork, thus pointing at open research questions that need to be tackled in future work.

Markets dominate the world’s food systems. Today’s food systems fail to realize the normative foundations of ecological economics: justice, sustainability, efficiency, and value pluralism. I argue that markets, as an institution for governing food systems, hinder the realization of these objectives. Markets allocate food toward money, not hunger. They encourage shifting costs on others, including nonhuman nature. They rarely signal unsustainability, and in many ways cause it. They do not resemble the efficient markets of economic theory. They organize food systems according to exchange value at the expense of all other social, cultural, spiritual, moral, and environmental values. I argue that food systems can approach the objectives of ecological economics roughly to the degree that they subordinate market mechanisms to social institutions that embody those values. But such “embedding” processes, whether through creating state policy or alternative markets, face steep barriers and can only partially remedy food markets’ inherent shortcomings. Thus, ecological economists should also study, promote, and theorize non-market food systems.

Auxin and ethylene pathways cooperatively regulate a variety of developmental processes in plants. Growth responses to ethylene are largely dependent on auxin, the key regulator of plant morphogenesis. Auxin, in turn, is capable of inducing ethylene biosynthesis and signaling making the interaction of these hormones reciprocal. Recent studies discovered a bunch of molecular events underlying auxin-ethylene crosstalk. In this review, we summarize the results of fine-scale and large-scale experiments on interaction of auxin and ethylene pathways in Arabidopsis. We integrate the knowledge on the molecular crosstalk events, their tissue specificity and associated phenotypic responses to decipher the crosstalk mechanisms at a systems level. We also discuss the prospects of applying systems biology approaches to study the mechanisms of crosstalk between plant hormones.

In contrast to physical sustainable measures carried out in homes, such as insulation, the installation of a Home Energy Management System (HEMS) has no direct and immediate energy-saving effect. A HEMS gives insight into resident behaviour regarding energy use. When this is linked to the appropriate feedback, the resident is in a position to change his or her behaviour. This should result in reduced gas and/or electricity consumption. The aim of our study is to contribute towards the effective use of home energy management systems (HEMS) by identifying types of homeowners in relation to the use of HEMS. The research methods used were a literature review and the Q-method. A survey using the Q-method was conducted among 39 owners of single-family homes in various Rotterdam neighbourhoods. In order to find shared views among respondents, a principal component analysis (PCA) was performed. Five different types of homeowner could be distinguished: the optimists, the privacy-conscious, the technicians, the sceptics, and the indifferent. Their opinions vary as regards the added value of a HEMS, what characteristics a HEMS should have, how much confidence they have in the energy-saving effect of such systems, and their views on the privacy and safety of HEMS. The target group classification can be used as input for a way in which local stakeholders, e.g. a municipality, can offer HEMS that is in line with the wishes of the homeowner.

In this digital world, organisations are facing global competition as well as manpower pressures leading towards knowledge economy, which heavily impacts on their local and international businesses. The trend is to foster collaboration and knowledge sharing to cope with these problems. With the advancement of technologies and social engineering that can connect people in virtual world across time and distance, several organisations are embarking on knowledge management (KM) systems, implementing community of practice (CoP) approach. However, virtual communities are relatively new paradigms, and there are several challenges to their successful implementation from an organisation’s point of interest. There is lack of CoP implementation framework that can cater to today’s dynamic business and sustainability requirements. To fill the gap in literature, this paper develops a practical framework for a CoP implementation with a view to align KM strategy with business strategy of an organization. It explores the different steps of building, sharing and using tacit and explicit knowledge in CoPs by applying Wiig KM cycle. It proposes a practical CoP implementation framework that adopts the Benefits-Tools-Organisation-People-Process (BTOPP) model in addressing the key questions surrounding each of the BTOPP elements with a structured approach. Finally, it identifies key challenges such as organizational culture and performance measurements, and provides practical recommendations to overcome them for a successful CoP implementation.

This paper focuses on the problem of finite-time stabilization of homogeneous, non-Lipschitz systems with dilations. A key contribution of this paper is the design of a virtual recursive Hölder, non-Lipschitz state feedback which renders the non-Lipschitz systems in the special case dominated by a lower-triangular nonlinear system, finite-time stable. The proof is based on a recursive design algorithm developed recently, to construct the virtual Hölder continuous, finite-time stabilizer as well as a C¹ positive definite and proper Lyapunov function that guarantees finite-time stability of the non-Lipschitz non-linear systems.

The agricultural sector is amidst an industrial revolution driven by the integration of sensing, communication, and artificial intelligence (AI). Within this context, the internet of things (IoT) takes center stage, particularly in facilitating remote livestock monitoring. Challenges persist, particularly in effective field communication, adequate coverage, and long-range data transmission. This study focuses on employing LoRa communication for livestock monitoring in mountainous pastures in the north-western Alps in Italy. The empirical assessment tackles the complexity of predicting LoRa path loss attributed to diverse land-cover types, highlighting the subtle difficulty of gateway deployment to ensure reliable coverage in real-world scenarios. Moreover, the high expense of densely deploying end devices makes it difficult to fully analyze LoRa link behavior, hindering a complete understanding of networking coverage in mountainous environments. This study aims to elucidate the stability of Lora link performance in spatial dimensions and ascertain theextent of reliable communication coverage achievable by gateways in mountainous environments. Additionally an innovative deep learning approach was proposed to accurately estimate path loss across challenging terrains. Remote sensing contributes to land-cover recognition, while Bidirectional Long Short-Term Memory (Bi-LSTM) enhances the path loss model’s precision. Through rigorous implementation and comprehensive evaluation using collected experimental data, this deep learning approach significantly curtails estimation errors, outperforming established models. Our results demonstrate that our prediction model outperforms established models with a reduction in estimation error to less than 5dB, marking a 2X improvement over state-of-the-art models. Overall, this study signifies a substantial advancement in IoT-driven livestock monitoring, presenting robust communication and precise path loss prediction in rugged landscapes.

In the Agriculture sector, control of plant leaf diseases is crucial as it influences the quality and production of plant species with an impact on the economy of any country. Therefore, automated identification and classification of plant leaf disease at an early stage is essential to reduce economic loss and to conserve the specific species. Previously, to detect and classify plant leaf disease, various Machine Learning models have been proposed; however, they lack usability due to hardware incompatibility, limited scalability and inefficiency in practical usage. Our proposed DeepLens Classification and Detection Model (DCDM) approach deal with such limitations by introducing automated detection and classification of the leaf diseases in fruits (apple, grapes, peach and strawberry) and vegetables (potato and tomato) via scalable transfer learning on A.W.S. SageMaker and importing it on AWS DeepLens for real-time practical usability. Cloud integration provides scalability and ubiquitous access to our approach. Our experiments on extensive image data set of healthy and unhealthy leaves of fruits and vegetables showed an accuracy of 98.78% with a real-time diagnosis of plant leaves diseases. We used forty thousand images for the training of deep learning model and then evaluated it on ten thousand images. The process of testing an image for disease diagnosis and classification using AWS DeepLens on average took 0.349s, providing disease information to the user in less than a second.

An interdigitated electrode sensor was designed and microfabricated for measuring the changes in the capacitance of three phosphate selective molecularly imprinted polymer (MIP) formulations, in order to provide hydroponics users with a portable nutrient sensing tool. The MIPs investigated were synthesised using different combinations of the functional monomers methacrylic acid (MAA) and N-allylthiourea, against the template molecules diphenyl phosphate, triethyl phosphate and trimethyl phosphate. A cross-interference study between phosphate, nitrate and sulfate was carried out for the MIP materials using an inductance, capacitance and resistance (LCR) meter. Capacitance measurements were taken applying an alternating current (AC) with a potential difference of 1 V root mean square (RMS) at a frequency of 1 kHz. The cross-interference study demonstrated a strong binding preference to phosphate over the other nutrient salts tested for each formulation. The size of template molecule and length of the functional monomer side groups also determined that a combination of a short chain functional monomer in combination with a template containing large R-groups produced the optimal binding site conditions when synthesising a phosphate selective MIP.

The accurate detection of clouds is an important first-step in the processing of remotely sensed satellite data analyses and subsequent cloud model predictions. While initial cloud retrieval technology began with the exploitation of one or two bands of satellite imagery, it has accelerated rapidly in recent years as sensor and retrieval technology have exploded, creating a new era in space exploration. Additionally, initial emphasis in satellite retrieval technology focused on cloud detection for cloud forecast models, more recently cloud screening in satellite acquired data is playing an increasingly critical role in the investigation of cloud free data for the retrieval of soil moisture, vegetation cover, ocean colour concentration and sea surface temperatures, as well as environmental monitoring of a host of products, e.g. atmospheric aerosol data, to study the Earth’s atmospheric and climatic systems. With about 60% of the Earth covered by clouds, on average, it is necessary to both accurately detect clouds in remote sensing data to screen cloud contaminate data in remote sensing analyses. In this paper, the evolution of cloud detection technology is highlighted with advancement in sensor hardware technology and possible AI algorithmic advances. Additionally, a discussion is presented on methods to obtain the cloud truth data needed to determine the accuracy of these cloud detection approaches.

In many parts of the Asia, particularly in the arid regions of the middle east the date palm i.e. Phoneix dactylifera L. is considered a significant plant both culturally and economically. Over the past decade numerous biotechnological tools have been applied to revolutionize the date palm research and its cultivation process. In this comprehensive review ,we provided the in depth overview of the cutting edge developments in the date palm biotechnology, mentioning the important areas such as genomics, genetic engineering, in vitro propagation, omics technologies, and the integration of the artificial intelligence and machine learning (AI-ML).Due to these advancements ,in the date palm production how the date palm production lead the production of superior date palm cultivars with the improved yield ,fruit quality and resilience to biotic and abiotic stresses. Also it explores the application of the biotech tools in the enhancing pest and disease management strategies, increasing date palm productivity and developing the date palm based bio-factories for the production of high value compounds. This review highlights the current challenges faced by the date palm industries ,including the limited water resources ,genetic erosion , pests and disease and the need for improved postharvest handling and processing. It examines how these tools coupled with AI-based approaches can be leveraged to address these challenges and ensure the long term sustainability of date palm cultivation.

Egypt faces numerous challenges in achieving food and nutritional security, due largely to its unique geography, water stress, and population growth. However, nontraditional crops and pseudo cereals such as buckwheat, quinoa, sorghum, teff, and millet offer promising avenues for sustainable agricultural development and improved nutrition. These crops exhibit high tolerance to adverse environmental conditions such as soil salinity and drought and are rich in essential nutrients like protein, amino acids, and vitamins. They also present an economic advantage due to their short growing seasons and adaptability to marginal lands. Recent advancements in remote sensing and Geographic Information Systems (GIS) technology, along with crop simulation models, provide further opportunities for optimizing land and water resources for these nontraditional crops. Their exceptional nutritional values, including low glycemic indices and gluten-free properties, make them well-suited to address current health challenges, such as malnutrition and the increasing prevalence of non-communicable diseases. The study emphasizes the need for further research to investigate land suitability, water management, and economic viability for the cultivation and commercialization of these crops. By leveraging these opportunities, Egypt has the potential to not only close its food gap but also improve overall nutritional well-being, contributing to both food security and sustainable agriculture.

Crop type and field boundary mapping enable cost-efficient crop management on the field scale and serve as the basis for yield forecasts. Our study uses a data set with crop types and corresponding field borders from the federal state of Bavaria, Germany, as documented by farmers from 2016 to 2018. The study classified corn, winter wheat, barley, sugar beet, potato, and rapeseed as the main crops grown in Upper Bavaria. Corresponding Sentinel-2 data sets include the normalised difference vegetation index (NDVI) and raw band data from 2016 to 2018 for each selected field. The influences of clouds, raw bands, and NDVI on crop type classification are analysed, and the classification algorithms, i.e., support vector machine (SVM) and random forest (RF), are compared. Field boundary detection and extraction are based on non-iterative clustering and a newly developed procedure based on Canny edge detection. The results emphasise the application of Sentinel’s raw bands (B1–B12) and RF, which outperforms SVM with an accuracy of up to 94%. Furthermore, we forecast data for an unknown year, which slightly reduces the classification accuracy. The results demonstrate the usefulness of the proof-of-concept and its readiness for use in real applications.

Histone changes that are adjustable and transmitted without altering the DNA sequence are part of epigenetic control. In many disorders, most famously malignancy, abnormal genetic information is seen as a result of mismanagement of typical epigenetic mechanisms. A paradigm change in the diagnosis and treatment of cancer has been brought about by recent discoveries about the processes of epigenetic modifications, chromatin remodeling, and noncoding RNAs implicated in the changed expression patterns of tumor cells. There is a significant increase in the search for drugs that could alter the epigenetic environment altered by tumor cells and benefit from their therapeutic potential. Phytochemicals with a high concentration of naturally produced phenol molecules known as flavonoids can regulate genomic processes. Understanding the precise epigenetic alterations brought on by flavonoid-mediated mechanisms is necessary to develop combination therapy techniques and genomic therapies for cancer. This article aims to thoroughly examine the epigenetic modifications of flavonoids, including their anticancer properties.

A field experiment was conducted for 2 years in Green Tea Laboratory of Saitama Prefectural Agriculture and Forestry Research Center, Iruma, Saitama, Japan from March 2014 to December 2015. Controlled release fertilizers (CRF) or organic fertilizers (ORG) which is the mixture of chicken manure and oil cakewere applied with the amount of 450 kg N ha^-1 yr^-1 in 2014 and 397 kg N ha^-1 yr^-1 in 2015. Nitrous oxide (N₂O) emissionsfrom soil in green tea fields were measured by closed chamber method. The results showed that CRF has significantly lower N₂O compared to ORG. The cumulative N₂O emissions from CRF accounted for 51% of N₂O emissions from ORG fields and 138% of control with no fertilizer treatment. The N₂O flux from the row was higher than that of under the canopy, since fertilizer were applied on the row. However the total emission from the area between the rows was lower than that under the canopy because of the area ratio of row and canopy was 1:5.

UV-A (ca. 365 nm wavelength, a.k.a. 'black light') photocatalysis has been investigated to comprehensively mitigate odor and selected air pollutants in the livestock environment. This study was conducted to confirm the performance of UV-A photocatalysis on the swine farm. The objectives of this research were to (1) scale-up of the UV-A photocatalysis treatment, (2) evaluate the mitigation of odorous gases from swine slurry pit, and (3) test different UV sources, (4) evaluate the effect of suspended particulate matter (PM), and (5) conduct preliminary economic analyses. We tested UV-A photocatalysis at a mobile laboratory-scale capable of treating ~0.2 - 0.8 m3·s-1 of barn exhaust air. The targeted gaseous emissions of barn exhaust air were significantly mitigated (p < 0.05) up to 40% reduction of measured odor; 63%, 44%, 32%, 40%, 66%, and 49% reduction of dimethyl disulfide, isobutyric acid, butanoic acid, p-cresol, indole, and skatole, respectively; 40% reduction of H2S; 100% reduction of O3; and 13% reduction of N2O. The PM mitigation effect was not significant. Formaldehyde levels did not change, and a 21% generation of CO2 was observed. The percent reduction of targeted gases decreased as the airborne PM increased. Simultaneous chemical and sensory analysis confirmed that UV-A treatment changed the overall nuisance odor character of swine barn emissions into weaker manure odor with 'toothpaste and 'mint' notes. The smell of benzoic acid generated in UV-A treatment was likely one of the compounds responsible for the less-offensive overall odor character of the UV-treated emissions. Results are needed to inform the design of a farm-scale trial, where the interior barn walls can be treated with the photocatalyst, and foul air will be passively treated as it moves through the barn.

There is a growing body of research exploring Complementary and Alternative Medicine (CAM) for the overall population; however, few studies have examined the effectiveness and applications of CAM practices in the paediatric population. According to the World Health Organization (WHO), parent's prevalence using CAM in their dependents is estimated to be as high as 80%. This literature review identified broad, heterogeneous, and inconclusive evidence regarding CAM applications and effectiveness caused mainly by variances in sociodemographic factors and national healthcare systems differences. Additionally, a lack of consensus and polarised positions among mainstream professionals regarding the CAM mechanism of action, applications, and effectiveness were identified. This narrative review shows debatable results for most CAM therapies and their applications. However, some evidence suggests that acupuncture, Yoga, Tai Chi, and massage might benefit users' physical and mental health. Additionally, meditation's available evidence indicates that it might be only helpful in the enhancement of mental health, whereas Reiki only displays an effect on patients' perceptions of comfort. Lastly, herbal medicine was observed to have non-specific evidence to support its claim, given the diverse nature and complexity of herbal compounds and procedures. This comprehensive narrative review might offer health professionals a reference to guide their health practices towards a personalised approach, taking into account the patient's values and beliefs, both important aspects of integrated, evidence-based practice, aiming to improve the quality of the offered health services and patients' satisfaction.

Although the effect of thermal modification (TM) on teak wood color is well documented, a few studies were carried out in closed system processes, as well as it remains unclear the effect of different processes on the same material. This work aimed to verify the effect of closed and open system processes of TM on the color of fast-growing teak wood. Thermally modified wood was evaluated in a closed system at 160 °C (CS160) and in an open system at 185 °C and 210 °C (OS185 and OS210). We measured the moisture content (initial and final) of wood, and the corrected mass loss (CML). The chemical analyses encompassed the contents of alpha-cellulose, hemicelluloses, lignin, and extractives (total, in acetone and dichloromethane). Wood color was measured before and after TM according to the CIEL*a*b* color space. It was possible to achieve the same color using different processes of thermal modification (CS160 and OS210). TM reduced wood lightness (L*), red-green chromaticity coordinate (a*), and yellow-blue chromaticity coordinate (b*). L* and a* had the bigger and lower variations, respectively. The color of thermally modified wood was significantly changed, even at the mildest condition tested (OS185, 0.33% CML).

In the current socio-economic context, pension systems have become a crucial topic in the agenda of governments and international bodies. In this paper, an empirical study regarding the economic and social sustainability of pension systems in Central and Eastern European Countries was performed. The goal of the research is to establish the sustainability of pension systems with econometric modeling techniques on three dimensions as the research hypotheses are revealed: first, by strengthening the financial soundness of pension systems; second, consolidating the economic environment of pension systems; third, increasing the degree of social security systems with a direct effect of reducing poverty. The results led to relevant insights emphasizing the need for more inclusive economic, financial, and social reforms. From a policy perspective, these findings could be a starting point for the enhancement of the financial adequacy and economic and social sustainability of pension systems in Central and Eastern European Countries. The econometric techniques in this study highlight those modern pensions systems that need to be addressed in a more complex and empirical context that must encompass the main technical aspects. The conclusions suggest that in the future it needs judicial, economic, and social adjustments for the enhancement of the financial soundness of the pension systems.

High temperatures (HT) and high hydrostatic pressures (HHP) are characteristic of deep-sea hydrothermal vents and other deep crustal settings. These environments host vast and diverse microbial populations, yet only a small fraction of those populations have been successfully cultured. This is due, in part, to the difficulty of sampling while maintaining these in situ conditions and also replicating those high-temperature and high-pressure conditions in the laboratory. In an effort to facilitate more HT-HHP cultivation, we present two HT-HHP batch culture incubation systems for cultivating deep-sea vent and subsurface (hyper)thermophilic microorganisms. One HT-HHP system can be used for batch cultivation up to 110 MPa and 121°C, and requires sample decompression during subsampling. The second HT-HHP system can be used to culture microorganisms up to 100 MPa and 160°C with variable-volume, pressure-retaining vessels that negate whole-sample decompression during subsampling. Here, we describe how to build cost effective heating systems for these two types of high-pressure vessels, as well as the protocols for HT-HHP microbial batch cultivation in both systems. Additionally, we demonstrate HHP transfer between the variable-volume vessels, which has utility in sampling and enrichment without decompression, laboratory isolation experiments, as well as HHP filtration.

Artificial intelligence methods and application have recently shown great contribution in modeling and prediction of the hydrological processes, climate change, and earth systems. Among them, deep learning and machine learning methods mainly have reported being essential for achieving higher accuracy, robustness, efficiency, computation cost, and overall model performance. This paper presents the state of the art of machine learning and deep learning methods and applications in this realm and the current state, and future trends are discussed. The survey of the advances in machine learning and deep learning are presented through a novel classification of methods. The paper concludes that deep learning is still in the first stages of development, and the research is still progressing. On the other hand, machine learning methods are already established in the fields, and novel methods with higher performance are emerging through ensemble techniques and hybridization.

The integration of Artificial Intelligence (AI) in dairy farm management through biometric facial recognition for cows is a significant stride in livestock management. This review critically evaluates the evolution, applications, and challenges of AI-driven biometric facial recognition in dairy farming. It emphasizes the role of this technology in enhancing individual monitoring of dairy cows, providing accurate health, behavior, and productivity tracking. Originally derived from human facial recognition systems, this approach utilizes distinctive bovine facial features for essential, non-invasive, real-time monitoring in large-scale operations. The progression of AI from elementary pattern recognition to advanced Convolutional Neural Networks (CNNs) and deep learning models marks a shift toward data-driven farming. This study addresses key challenges such as environmental variability, data collection hurdles, ethical concerns, and technological limitations. It also contrasts various AI models, spotlighting their unique strengths and practical utility in dairy farming scenarios. Despite these challenges, facial recognition technology holds promise for improving farm efficiency, animal welfare, and sustainable practices, highlighting the need for continuous research and development. The review concludes by advocating for future research focused on environmental adaptability, ethical AI application, cross-breed compatibility, and integration with other farming technologies. Ultimately, it underscores AI's transformative potential in modernizing dairy farming towards a more data-oriented, responsible agricultural future.

This literature review offers a comprehensive analysis of the design and optimization of microstrip patch antennas for wireless communication systems, drawing insights from a variety of research papers. It examines diverse approaches aimed at enhancing antenna performance and functionality. Key topics explored include optimization of resonant frequency, design of antenna arrays, and bandwidth enhancement. Noteworthy optimization techniques, such as genetic algorithms and artificial neural networks, are discussed, highlighting their effectiveness in achieving superior antenna performance. Application-specific solutions tailored to areas such as military communication and RFID systems are emphasized. The review underscores the significant role played by optimization techniques in achieving desired performance metrics and identifies future research directions, including multi-objective optimization, investigation of robustness and reliability, and integration with advanced technologies. Overall, this literature review provides valuable insights into the state-of-the-art in microstrip patch antenna design and optimization, guiding future research endeavors in this dynamic and rapidly evolving field.

Passive balancing is a traditional choice for lithium-ion battery packs although it is regarded as highly inefficient. One opportunity to improve traditional balancing in sub-medium size battery packs is to combine two balancing methods: passive and active. Statistical analysis have been performed to rationalize battery pack division in smaller packs and use of higher level selective charging method to decrease losses of passive balancing. An experimental balancing prototype have been designed and tested for efficiency. Results indicate energy performance degradation if cells of the pack are with low capacity variation. Proposed balancing approach could improve performance under high cell mismatch conditions.

Solid-state transformer (SST) is a promising technology for smart grids due to its flexible power control (better reliability) and high efficacy (by decreasing losses) compared with traditional transformers. The SST is designed in tandem with three stages, i.e., the input, isolation, and output stages. As three converter stages are used to design the SST to make a more reliable device in practice, it is highly prone to instabilities. Moreover, the key objective of SST design is to implement a modern power distribution system to make it more intelligent and reliable. The stability issue can be even more complicated by the presence of distributed energy resources in the distribution system. Thus, the stability of SST must be measured prior to /during the design, and to determine, a state-space model is used, which is developed in this paper. Each stage of SST is modeled with its controller, and the system's stability is measured through the controllability and observability test. Further, the conversion from state-space to transfer function model is done, and the stability of SST is shown using frequency and time-domain diagrams. With these, the different plots, namely, the Bode plot, Nyquist plot, Nichols chart, Root locus, pole-zero plot, and Eigen plot, are used to ascertain the relative and absolute stability. Finally, the SST Simulink model is tested and validated through hardwate-in-the-loop simulation, i.e., OPALRT, to show its effectiveness and applicability.

Heterogeneous systems of limited capacity have general applications in manufacturing, but also for logistic or service systems, due to the differences in server or workstation performance or work assignment, in close relationship with system flexibility, where saturation and blocking are ordinary situations of systems with high demand and limited capacity, so accurate loss quantification is essential for performance evaluation. Multi-class systems of limited capacity have been studied much less than parallel homogeneous systems (Erlang models). In this context, accurate models for parallel heterogeneous ordered-entry systems are developed: without any prior queue, M/Mi/c/c, and with a k capacity queue M/Mi/c/c+k. These new matrix models give an exact state formulation, and their accuracy is verified through discrete event simulation and comparison with literature results. Also, the effect of queue capacity is studied in relationship with the pattern of service rates. Next, the heterogeneous recirculating system model is also developed with good approximation results. Finally, the proposed models are applied to evaluate systems with non-exponential service times, through a new hybrid methodology by combining the Markovian model and the Monte Carlo Method (MCM) for normal or lognormal service times that also yield useful good approximations to the simulated system.

Carbonate rocks occupy about 6490 km2 in Albania (23% of the country) and the total exploitable karst water resources are estimated in 2.84*109 m3/year (about 65% of the total exploitable groundwater resources in the country, and about 70% of those used for water supply). In addition, karst massifs are very rich in thermal waters, related to the ascending fluids which are essential for the development of hypogenic karstification in the outer Albanides. This type of karst facilitates the circulation regime of deep fluids, which are revealed at the surface through both numerous phenomena of hypogene karst and hot springs. The relatively small Kruja Tectonic Zone is characterized by the presence of SE-NW oriented carbonate structures, rich in thermal sources, and contains more than the 80% of Albania thermal springs. One of its most interesting carbonate structures, for the presence of both cold and thermal waters, is the small karst structure of Makaresh, with a surface of 22 km2. The purpose of this article is to describe the characteristics and factors that affect the quantitative and qualitative formation of cold and thermal groundwater in this massif. Based on the physico-chemical characteristics, groundwaters of the study area are classified in cold and thermal waters. The former are mainly of HCO3-Ca or HCO3-Ca-Mg type (Electrical Conductivity 580-650 μS/cm, Temperature 13.9-16.6° C). Thermal waters are mainly of the Cl-Na-Ca type (EC 7200-7800 μS/cm, T 18.5-22.5° C); further, they are characterized by high hydrogen sulphide concentration, up to about 350 mg/l. The presence of two groundwater types in the Makaresh massif is connected to the presence of two groundwater circulation systems. The main factors of the groundwater physic-chemical quality are the solution of rocks and minerals therein contained, the presence of hypogenic speleogenesis, and the mixing of the groundwater of the two systems. The hydrogeological studies proved that karst rocks contain considerable fresh water resources; the capacity of water wells used for the drinking water supply reaches up to about 50 l/s. Thermal waters are not currently exploited due to their temperature, but they are potentially suitable for thermal uses, by drilling boreholes at depth of about 1000 m.

Breast Cancer metastasis remains a formidable challenge in cancer research, contributing significantly to patient mortality despite advances in medical research. Lung metastasis, associated with breast cancer, poses an ongoing clinical dilemma with limited curative treatment options. This study delves into the intricate mechanisms underlying Breast Cancer-Lung Metastasis (BC-LM) primarily focusing on the function of SH3PXD2B in maturation of invadopodia, inducing epithelial-to-mesenchymal transition, disruption of proteostasis network, and ultimately leading to metastasis of Breast Cancer (BC) cells. With an extensive analysis of differential gene expression using RNASeq data, comparing normal breast cancer cells to metastatic sub-populations in lung. Employing the New Tuxedo pipeline our investigation notably observes SH3PXD2B as a key regulator in lung metastasis samples. This trend is further substantiated by data from the Cancer Cell Line Encyclopedia (CCLE), and Human Protein Atlas (HPA) which highlights elevated SH3PXD2B expression in MDA-MB-468 cells, underscoring its significance in metastatic adenocarcinoma. Additionally, we checked the overall survival (OS) of metastatic breast cancer (MBC) patients pinpointing SH3PXD2B and its associated partners like SH3PXD2A, MMPs, CTTN, ADAMs, and EMT markers with substantial expression in both BC and lung cancer, prognosticating poorer patient survival. Further, our transcription factor – target gene (TFTG) network essentially elucidated the role of SH3PXD2B as a key node in the network unveiling its roles in regulating cell migration, communication, and developmental processes. Proteomics and Western blotting assays consistently confirm heightened SH3PXD2B expression in BC cell lines, reaffirming our findings. By employing computational structure biology along with cancer systems biology approach, we generated a high-confidence structural model of SH3PXD2B, indicating its SH3_2 and SH3_3 domains crucial for interactions with the drug molecules. Molecular docking simulations identify Eribulin as a promising therapeutic agent capable of targeting these domains. Thus, our multidisciplinary approach seamlessly amalgamates systems medicine principles, aiming to repurpose existing drugs that target SH3PXD2B based on molecular signatures. Targeted therapies have emerged as a promising avenue for addressing MBC and this mechanistic model introduces novel therapeutic avenues for the treatment of BC-LM patients.

Domain-specific systems-on-chip (DSSoCs) aim to narrow the gap between general-purpose processors and application-specific designs. CPU clusters enable programmability, while hardware accelerators tailored to the target domain minimize task execution times and power consumption. Traditional operating system (OS) schedulers can diminish the potential of DSSoCs as their execution times can be orders of magnitude larger than the task execution time. To address this problem, we propose a dynamic adaptive scheduling (DAS) framework that combines the advantages of a fast, low-overhead scheduler and a sophisticated, high-performance scheduler with a larger overhead. We present a novel runtime classifier that chooses the better scheduler type as a function of the system workload, leading to improved system performance and energy-delay product (EDP). Experiments with five real-world streaming applications indicate that DAS consistently outperforms fast, low-overhead, and slow, sophisticated schedulers. DAS achieves a 1.29x speedup and 45% lower EDP than the sophisticated scheduler under low data rates and a 1.28x speedup and 37% lower EDP than the fast scheduler when the workload complexity increases. Furthermore, we demonstrate that the superior performance of the DAS framework also applies to hardware platforms, with up to a 48% and 52% reduction in execution time and EDP, respectively.

This study investigates the long-term impact of soil tillage systems and crop residue incorporation on agrophysical properties. A long-term field experiment has been conducted since 1999 at the Ex-perimental Station of Vytautas Magnus University Agriculture Academy. According to the latest edition of the International Soil Classification System, the soil in the experimental field was classified as Planosol, with a silty medium loam texture at a depth of 0–20 cm and a silty light loam at a depth of 20–40 cm. This investigation aimed to assess the long-term impact of reduced tillage systems, straw, and green manure combinations on soil physical properties, including soil shear strength, and soil aggregate stability. Studies were carried out on winter wheat crops in 2014, 2017, and 2023. The treatments were arranged using a split-plot design. In a two-factor field experiment, one part of the experimental field had straw removed, while the other part had the entire straw yield chopped and spread at harvest (Factor A). The subplot factor (Factor B) included three different tillage sys-tems: conventional deep ploughing, cover cropping for green manure with no-till, and no-tillage. Soil samples were analysed in the Laboratory of Agrobiology at Vytautas Magnus University Ag-riculture Academy. The findings indicate that long-term application of reduced tillage significantly increases soil shear strength. Shallower tillage depths lead to higher soil shear strength, while the effect of spreading plant residues is relatively lower. Long-term tillage of different intensities, spreading plant residues, and catch crop cultivation for green manure did not significantly affect soil structure. However, soil structural stability was found to be highly dependent on soil tillage. Cover cropping for green manure with no-till and no-tillage positively affected soil aggregate sta-bility in the upper (0–10 cm) and 10–25 cm layers.

This research work aims to develop a mathematical modeling for production-inventory systems. Two mathematical models are present: An infinite dimensional, partial differential equation (PDE), production level modeling is present and a finite dimensional system for a coupled dynamic pricing, production rate and inventory level ordinary differential equations (ODE), integrating a proper Lyapunov stability analysis of the dynamical system and simulations.

Offshore electricity production, mainly by wind turbines, and eventually floating PV in the future, will contribute to increase renewable energy production, as well as their dispatchability. The need for that energy evacuation and the implementation of the hydrogen economy are challenges that arise the evaluation of such energy facilities for the direct production of hydrogen. The analysis of the alternatives for the evacuation of offshore renewable electricity for the production of hydrogen is presented. The analysis includes discussion about the current state of the art of hydrogen pipelines and subsea cables, as well as the storage and bunkering system that is needed on shore. The main options for energy evacuation will be via an electric subsea cable to produce hydrogen onshore, or by pipeline, depending on the capacity of the offshore plant. For low capacity, an electric subsea cable is the best option. For high capacity renewable offshore plants, pipelines start to be competitive for distances above aprox. 450 miles.

Abstract: Arranged patterns obtained by ultrafast laser processing on the surface of Ti/Cu/Ti/Si and Ti/Zr/Ti/Si thin film systems are reported. Two differently designed multilayer thin films, Ti/Cu/Ti/Si and Ti/Zr/Ti/Si, were deposited on silicon by the ion sputtering method. The bioactive surfaces on these systems involve the formation of laser-induced periodic surface structures (LIPSS) in each of the laser-written lines of mesh patterns on 5x5 mm areas. The formation of nano- and micro-patterns with an ultra-thin oxide film on the surfaces was used to observe the effects of morphology and proliferation of the MRC-5 cell culture line. To determine whether Ti-based thin films have a toxic effect on living cells, an MTT assay was performed. The relative cytotoxic effect as a percentage of surviving cells showed that there was no difference in cell number between the Ti-based thin films and the control cells. There was also no difference in the viability of the MRC-5 cells, except for the Ti/Cu/Ti/Si system, where there was a slight 10% decrease in cell viability.

For the emerging autonomous swarm technology, from the perspective of systems science and systems engineering, there must be some novel elements and methods to aggregate multiple systems into a group, which distinguish with the general components with specific functions, and we expect to provide the presentation of their existence in the swarm development processes. The inspiration of our methodology origins from the integration of swarm ontology, multi-paradigm modeling, multi-agent system, cyber-physical system, etc. Therefore, we choose the model-driven technology as a framework to acquire an approach of model representation across the multiple levels of abstraction and composition. The autonomous strategic mechanism is defined and formed in parallel with ConOps analysis and systems design, so as to effectively solve the cognitive problem of emergence caused by the nonlinear causation among individual and whole behaviors. This approach highlights to use the MBSE processes and their artifacts to embed the meso mechanism to integrate the operational and the functional, and which means to connect the macro and micro aspects in formalism and so to become a whole with its expected goals, and then to verify and validate within a L-V-C simulation environment.

Wind power generation is one of the mainstream renewable energy resources. Voltage stability is as important as the frequency stability of a power system with a high penetration of wind power generation. The advantages of high-voltage direct current (HVDC) transmission systems become more significant with the increase of both installed capacity and transmission distance in offshore wind farms. Therefore, this study discusses about various voltage control methods for wind turbines and HVDC transmission systems. First, various voltage control methods of a wind farm were introduced, and they include QV control and voltage droop control. The reactive power of a wind turbine varies with active power, while the active power from each wind turbine may be different owing to wake effects. Thus, QV and voltage droop control with varying gain values were also discussed in this paper. Next, the voltage control methods for a HVDC transmission system, such as power factor control, voltage control, and Vac-Q control, are also summarized and tested in this study. When a three-phase short circuit fault occurs or a suddan reactive power load increases, the system voltage would drop immediately. Thus, various voltage control methods for wind turbines or HVDC can make the system's transient response more stable. Therefore, this study implemented the simulation scenarios, including a three-phase short circuit fault at the point of common coupling (PCC) or a sudden increase of reactive power load, and adopted various voltage control methods, which aims to verify whether additional voltage control methods are effective to improve the performance of transient voltage.

Cooperative non-orthogonal multiple access (CNOMA) has been recently adapted with energy harvesting (EH) to increase energy efficiency and extend the lifetime of energy-constrained wireless networks. In EH, two protocols are usually used for CNOMA, namely, power splitting (PS) and time switching (TS). In order to improve the existing EH protocols, this paper investigates a hybrid EH protocol-assisted CNOMA, which is a combination of the two aforementioned main existing EH protocols. The end-to-end bit error rate (BER) and outage probability (OP) expressions of users in our scheme are derived over Nakagami-m fading channels. For the sake of comparison and to highlight the achievable gains, the performance of the hybrid EH (HEH) protocol is compared with the benchmark schemes (i.e., existing EH protocols and no-EH). Based on extensive simulations, it is shown that the analytical results match perfectly with simulations which demonstrates the correctness of the derivations. Numerical results clearly indicate the superiority of the proposed scheme over all the considered benchmarks. In addition, we discuss the optimum value of EH factors to minimize the error and outage in the proposed scheme and show that an optimum value can be obtained according to channel parameters.

Desertification and dune progression over vegetation is quantified using remote sensing data, but vegetation, eventually temporarily, buried under sand blowout may escape such assessment, and to estimate the extent of buried vegetation, a GPR campaign was conducted over the coastal sand-dune of Tottori Prefecture (Japan) in combination with a high-resolution topographic UAV-based survey of the topography. The result shows that buried vegetation exists underneath sand-blowout, especially near the dune ridges, and that this vegetation can extend 20 – 30 m further than the estimation made from airborne remote sensing. Furthermore, the presence of palaeo-vegetation in palaeodune layers also provide information on the long-term evolution of sand dunes (with periods of stability vs rapid change), which can be used to reconstruct Quaternary coastal environments.

In this paper we present AWEbox, a Python toolbox for modeling and optimal control of multi-aircraft systems for airborne wind energy (AWE). AWEbox provides an implementation of optimization-friendly multi-aircraft AWE dynamics for a wide range of system architectures and modeling options. It automatically formulates typical AWE optimal control problems based on these models, and finds a numerical solution in a reliable and efficient fashion. To obtain a high level of reliability and efficiency, the toolbox implements different homotopy methods for initial guess refinement. The first type of methods produces a feasible initial guess from an analytic initial guess based on user-provided parameters. The second type implements a warmstart procedure for parametric sweeps. We investigate the software performance in two different case studies. In the first case study we solve a single-aircraft reference problem for a large number of different initial guesses. The homotopy methods reduce the expected computation time by a factor of 1.7 and and the peak computation time by a factor of 8, compared to when no homotopy is applied. Overall, the CPU timings are competitive to timings reported in the literature. When the user initialization draws on expert a priori knowledge, homotopies do not increase expected performance, but the peak CPU time is still reduced by a factor of 5.5. In the second case study, a power curve for a dual-aircraft lift-mode AWE system is computed using the two different homotopy types for initial guess refinement. On average, the second homotopy type, which is tailored for parametric sweeps, outperforms the first type in terms of CPU time by a factor of 3. In conclusion, AWEbox provides an open-source implementation of efficient and reliable optimal control methods that both control experts and non-expert AWE developers can benefit from.

Generation of unique identifiers extracted from the physical characteristics of the underlying hardware ensures the protection of electronic devices against counterfeiting and provides security to the data they store and process. This work describes the design of an efficient Physical Unclonable Function (PUF) based on the differences in the frequency of Ring Oscillators (ROs) with identical layout due to variations in technological processes involved in the manufacture of the integrated circuit. The logic resources available in the Xilinx Series-7 programmable devices are exploited in the design to make it more compact and achieve an optimal bit-per-area rate. On the other hand, the design parameters can also be adjusted to provide a high bit-per-time rate for a particular target device. The PUF has been encapsulated as a configurable Intellectual Property (IP) module, providing it with an AXI4-Lite interface to ease its incorporation into embedded systems in combination with soft- or hard-core implementations of general-purpose processors. The capability of the proposed RO-PUF to generate implementation-dependent identifiers has been extensively tested, using a series of metrics to evaluate its reliability and robustness for different configuration options. Finally, in order to demonstrate its utility to improve system security, the identifiers provided by RO-PUFs implemented on different devices have been used in a Helper Data Algorithm (HDA) to obfuscate and retrieve a secret key.

Economic expedience of waste heat recovery systems (WHRS), especially for low temperature difference applications, is often questionable due to high capital investments and long pay-back periods. By its simple design isobaric expansion (IE) machines could provide a viable pathway to utilize otherwise unprofitable waste heat streams for power generation and particularly for pumping liquids and compression of gases. Different engine configurations are presented and discussed. A new method of modelling and calculation of the IE process and efficiency is used on IE cycles with various pure and mixtures as a working fluid. Some interesting cases are presented. It is shown in this paper, that the simplest non-regenerative IE engines are efficient at low temperature differences between a heat source and heat sink. Efficiency of non-regenerative IE process with pure working fluid can be very high approaching Carnot efficiency at low pressure and heat source/heat sink temperature differences. Regeneration permits to increase efficiency of the IE-cycle to some extent. Application of mixed working fluids in combination with regeneration permits to significantly increase the range of high efficiencies to much larger temperature and pressure differences.

Mechanical power and motion are often transmitted by the gear-rotor-bearing system. When there are fitting clearances between the housing and outer ring in bearings, complex vibration responses will be generated, which makes the operating status difficult to identify. Therefore, for analyzing dynamic responses, a dynamic model of gear-rotor-bearing systems with bearing fitting clearances is proposed. In the model, the bearing system with fitting clearances and gear pair system are combined, and the coupling relationship is determined by the gyroscopic mo-tion of the shaft. The friction force and collision force caused by fitting clearances are also con-sidered, which are simulated by the Coulomb friction model and Hertz theory. The result shows that the meshing stiffness will also be excited by the bearing displacement. When there are fit-ting clearances on the bearing, the amplitude modulation of the bearing outer raceway to the system time-domain response is intensified, and the multiple harmonic frequency of bearings and gear pairs are generated on the spectrum, as well as defect frequencies of gear pairs. As the fitting clearance is increased, the higher multiple harmonic responses will be caused. Although the response amplitude of the gearbox is increased by raising the input speed, multiple harmon-ic responses are suppressed, which makes the system mainly vibrate at the fundamental fre-quency. Then, the dynamic model and the vibration analysis are experimentally verified.

Education for Sustainable Development (ESD) is considered vital to the success of the United Nations’ Sustainable Development Goals. Systems Thinking has been identified as a core competency necessary to incorporate into ESD. Systems Thinking orientated ESD learning tools, established methods of assessment of sustainability skills, and studies to demonstrate effectiveness of such learning tools, are all lacking. There is a wealth of experience in the System Dynamics field regarding the application of Systems Thinking and simulation to environmental problems, sustainability and systems education. Many System Dynamicists regard simulation as essential for teaching Systems Thinking. The substantial body of research into the design of effective simulation-based learning environments (SBLEs) can also inform ESD initiatives. This research describes a randomised controlled trial (n=106) to investigate whether an online sustainability learning tool that incorporates Systems Thinking and System Dynamics simulation increases understanding of a specific problem and supports transfer of knowledge to a second problem with a similar systemic structure. The effects of Systems Thinking and simulation were tested separately and in combination. The learning tool was designed for a single online learning session. Simulation was found to increase ESD learning outcomes significantly, and also to support transfer of skills, although less significantly.

In systems biology, biological phenomena are often modeled by ODE and distributed in the de facto standard file format SBML. The primary analyses performed with such models are dynamic simulation, steady-state analysis, and parameter estimation. These methodologies are mathematically formalized, and libraries for such analyses have been published. Several tools exist to create, simulate, or visualize models encoded in SBML. However, setting up and establishing analysis environments is a crucial hurdle for non-modelers. Therefore, easy access to perform fundamental analyses of ODE models is a significant challenge. We developed SBMLWebApp, a web-based service to execute SBML-based simulations, steady-state analysis, and parameter estimation directly in the browser without the need for any setup or prior knowledge to address this issue. SBMLWebApp visualizes the result and numerical table of each analysis and provides a download of the results. SBMLWebApp allows users to select and analyze SBML models directly from the BioModels Database. Taken together, SBMLWebApp provides barrier-free access to an SBML analysis environment for simulation, steady-state analysis, and parameter estimation for SBML models. SBMLWebApp is implemented in Java™ based on an Apache Tomcat® web server using COPASI, the SBSCL, and LibSBMLSim as simulation engines. SBMLWebApp is licensed under MIT with source code available from https://github.com/TakahiroYamada/SBMLWebApp. The program runs online at http://simulate-biology.org.

In this work, we derive the spectral efficiency, secrecy outage probability, and bit error rate of a communication system assisted by a large intelligent surface (LIS). We consider a single-antenna user and an array of antennas at the transmitter side and the possibility of a direct link between transmitter and receiver. Additionally, there is a single-antenna eavesdropper with a direct link to the transmitter, which is modeled as a Nakagami-m distributed fading coefficient. The channels from transmitter to the LIS and from the LIS to the user may or may not have the line-of-sight (LoS) and are modeled by the Nakagami- m distribution. Moreover, we assume that the LIS elements perform non-ideal phase cancellation leading to a residual phase error that assumes a Von Mises distribution. We show that the resulting channel can be accurately approximated by a Gamma distribution whose parameters are analytically estimated using the moments of the equivalent signal-to-noise ratio. We also provide an upper bound for the error probability for M-QAM modulations. With the derived formulas, we analyze the effect of the strength of the LoS link by varying the Nakagami parameter, m.

Worldwide, there is a significant increase in the use of unmanned aerial vehicles (UAVs) by emergency services. They offer a lot of possibilities during the rescue operation. Such a wide application for various purposes and environments causes many threats related to their use. To minimize the risks associated with conducting air operations with UAVs, the SORA methodology will be important. Due to its level of detail, it is a methodology adapted to civilian use. In this article, the authors' team will try to develop guidelines and directions for adapting SORA to the requirements of the operational work of emergency services. Thus following article aims to present the most important risks related to conducting operations with the use of UAVs by First Responders (FRs) and to show the sample risk analysis performed for this type of operation on the example of the ASSISTANCE project. The paper describes, on the one hand, possibilities offered by UAVs in crisis or disaster management and step-by-step Specific Operations Risk Assessment (SORA) and on the other hand, presents possible threats, consequences and methods of their mitigation during FRs missions.

Clean, fresh, and safe drinking water is essential to human health and well-being. Occasionally, chemical pollutants taint surface water quality used for consumption. Microcystins (MCs) are toxic heptapeptides produced by freshwater cyanobacteria. These secondary metabolites can reach hazardous concentrations, impairing surface drinking water supplies. Inconsistent screening of MCs is not uncommon in Florida waters as no provisional guidance value is established to protect public health. The occurrence of MCs in Lake Manatee and Lake Washington was monitored over the potential peak algae bloom season (June-August). An indirect competitive enzyme-linked immunosorbent assay (icELISA) quantified total MCs in two drinking water systems. Varied concentrations occurred between June and July, whereas concentrations peaked in August. Overall, MC prevalence was higher in Lake Manatee than Lake Washington. Colorimetric assays measured phosphate and nitrite in environmental water samples. Phosphate and nitrite concentrations strongly correlated with total MCs (p < 0.01). The results indicate the intrinsic nature of environmental MCs in surface drinking water supplies and the need to examine hepatotoxin dynamics to preserve drinking water quality in community served areas.

Concrete is the most commonly used construction material due to its various advantages, such as versatility, familiarity, strength and durability and it will continue to be in demand far into the future. However, with today’s sensitivity to the environmental protection, this material is facing unprecedented challenges due to its high greenhouse gas emission mainly during cement production. This paper investigates one of the promising cement replacement materials, alkali activated cement (AAC) concrete. Being produced mainly from byproduct materials and having a comparable structural performance to conventional concrete, AAC concrete has a potential to transform the construction industry. Mechanical properties such as compressive and flexural strength and the relationship between them are studied. Different source materials such as fly ash (FA), ground granulated blast furnace slag (GGBS), silica fume (SF) and Metakaolin (MK) are used. The effect of the source materials and the activator solutions on the concrete performance is studied. Furthermore, the freeze-thaw resistance of the concrete is studied. The results of the study showed that the behavior of AAC depends highly on the source material combinations as well as type used. The effect of the alkaline solution is also dependent on the source material used. Mixes with higher GGBS content in general showed the highest strength while mixes with MK showed the highest flexural strength. The results from the freeze-thaw test showed that proper design of AAC concrete with a lower water content is critical to achieve a good resistance.

Although the dockless bike-sharing system, which can be regarded as a typical example of the resource-sharing system, has been increasingly popular for years with people especially in China, the imbalanced distribution of shared bikes gradually becomes a major problem for both bike-sharing companies and their customers. To solve the imbalance problem, we aim to investigate the long-term performance of a system under the influence of some key factors (with an emphasis on the unequal demand between different nodes), which can guide us to discover the causes of the problem and offer several valuable suggestions to the operators. According to the fundamental principle of a dockless bike-sharing system, we propose a model reduction method to reduce the complexity of the theoretical network models, which are developed based on the Markovian queueing theory with the consideration of higher-demand nodes and lower-demand nodes. The theoretical network models provide us with steady-state probabilities of having a certain number of bikes at one node, which are used as an important part of the optimization model for solving the imbalance problem by carrying out an operator-based relocation strategy. The objective of the optimization model is to maximize the total profit and determine the optimal relocation frequency. It is found that most of the shared bikes are possible to gather at one low-demand node eventually in the long run under the influence of the different arrival rates at different nodes, but the decrease of the number of bikes at the high-demand nodes is more sensitive to the unequal demands and may cause a great loss for operators, which should be payed attention to especially when solving the relocation problems.

The increasingly used approach of combining different simulation software in testing of automated driving systems (ADS) increases the need for potential and convenient software designs. Recently developed co-simulation platforms (CSP) provide the possibility to cover the high demand on testing kilometers for ADS by combining vehicle simulation software (VSS) with traffic flow simulation software (TFSS) environments. The emphasis on the demand of testing kilometers is not enough to choose a suitable CSP. The complexity level of the used vehicle, object, sensors and environment models is essential for valid and representative simulation results. Choosing a suitable CSP raises the question of how the test procedures should be defined and constructed and what the relevant test scenarios are. Parameters of the ADS, the environments, objects, sensors in VSS as well as traffic parameters in TFSS can be used to define and generate test scenarios. In order to generate a large number of scenarios in a systematic and automated way, suitable and appropriate software designs are required. In this paper we present a software design for CSP based on the Model-View-Controller (MVC) design pattern and implementation of a complex CSP for virtual testing of ADS. Based on this design, an implementation of a CSP is presented using the VSS from IPG Automotive called CarMaker and the TFSS from PTV Group called Vissim. The results have shown that the presented CSP design and the implementation of the co-simulation can be used to generate relevant scenarios for testing of ADS.

This paper is focused on the analysis of methods used to assess effectiveness and efficiency of the occupational safety and health management system (OSHMS) in a company. It reviews current Russian and international occupational safety and health standards. The paper details the method outlined in International Standard GOST 12.0.230.3-2016 “Occupational safety standards system. Management systems for occupational safety. Evaluation of effectiveness and efficiency” based on the data collected during the external audit of OSHMS function efficiency in a Russian mining company. Effectiveness and efficiency indicators were determined, and a generalized desirability coefficient was calculated. Weaknesses of the method proposed in GOST 12.0.230.3-2016 were identified and mathematical and linguistic solutions were proposed to improve it. Harrington function was used to determine a numerical and linguistic score. The performed calculation demonstrated that the company needed strategic management decisions to improve the current situation. Practical approaches were offered to enhance the company's systems-based occupational safety and health performance..

In this paper, the fixed-time stabilization problem for a class of uncertain chained system is addressed by using a novel nonsingular recursive terminal sliding mode control approach. A fixed-time controller and an adaptive law are designed to guarantee the uncertain chained form system both Lyapunov stable and fixed-time convergent within the settling time. The advantage of the controller based on the sliding mode is that the settling time does not depend on the system initial state. Furthermore, we use RBF neural network to estimate the uncertainty of the system. Finally, the simulation results demonstrate the performance of the control laws.

Bottom-up systems biology entails the construction of kinetic models of cellular pathways by collecting kinetic information on the pathway components (e.g. enzymes) and collating this into a kinetic model, based for example on ordinary differential equations. This requires integration and data transfer between a variety of tools, ranging from data acquisition in kinetics experiments, to fitting and parameter estimation, to model construction, evaluation and validation. Here, we present a workflow that uses the Python programming language, specifically the modules from the SciPy stack, to facilitate this task. Starting from raw kinetics data, acquired either from spectrophotometric assays with microtitre plates or from NMR spectroscopy time courses, we demonstrate the fitting and construction of a kinetic model using scientific Python tools. The analysis takes place in a Jupyter notebook, which keeps all information related to a particular experiment together in one place and thus serves as an e-labbook, enhancing reproducibility and traceability. The Python programming language serves as an ideal foundation for this framework because it is powerful yet relatively easy to learn for the non-programmer, has a large library of scientific routines and active user community, is open-source and extensible, and many computational systems biology software tools are written in Python or have a Python API. Our workflow thus enables investigators to focus on the scientific problem at hand rather than worrying about data integration between disparate platforms.

This work presents some characteristics of MoNet, a computerized platform for the modeling and visualization of complex systems. Emphasis is on the ideas that allowed the successful progressive development of this modeling platform, which goes along with the implementation of applications to the modeling of several studied systems. The platform has the capacity to represent different aspects of systems modeled at different observation scales. This tool offers advantages in the sense of favoring the perception of the phenomenon of the emergence of information, associated with changes of scale. Some criteria used for the construction of this modeling platform are included. The power of current computers has made practical representing graphic resources such as shapes, line thickness, overlaying-text tags, colors and transparencies, in the graphical modeling of systems made up of many elements. By visualizing diagrams conveniently designed to highlight contrasts, these modeling platforms allow the recognition of patterns that drive our understanding of systems and their structure. Graphs that reflect the benefits of the tool regarding the visualization of systems at different scales of observation are presented to illustrate the application of the platform.

The recovery of precious metals is a project with both economic and environmental significance. In this paper, it presents how to use bacterial mineralization to selectively recover gold from multi-ionic aqueous systems. The Bacillus licheniformis FZUL-63, separated from a landscape lake in FuZhou University, was shown to selectively mineralize and precipitate gold from coexisting ions in aqueous solution. The removal of Au(III) was almost happened in first hour, and FTIR data show that the amino, carboxyl and phosphate groups on the surface of the bacteria are related to the adsorption of gold ions. XPS results implied that Au(III) ions are reduced to monovalent, and then the Au(I) was adsorbed on the bacterial surface at the beginning stage(first hour). XRD results showed the gold biomineralization began about 10 hours after the interaction between Au(III) ions and bacteria. The Au(III) mineralization has been rarely influenced by other co-existing metal ions. TEM analysis shows the gold nanoparticles are polyhedral structure with a particle size of ~20 nm. The Bacillus licheniformis FZUL-63 could selectively mineralize and recover 478 mg/g(dry biomass) gold from aqua regia-based metal wastewater through four cycles. It could be of great potential in the practical application.

Filter Media (FM) sourced from recycled organic and mineral material offers a low cost and effective means of treating urban stormwater. Using recycled materials rather than from an increasingly scarce source of virgin materials (typically sandy loam soil) can ensure a sustainable long-term economy and environment. This paper presents results from the laboratory analysis and mathematical modeling to highlight the performance of recycled organic and mineral material in removing nutrients and metals from stormwater. Analysis included physical and chemical characterisation such as particle size distribution, saturated hydraulic conductivity (Ksat), bulk density, effective cation exchange capacity, and pollutant removal performance. Design mixes (DM), comprising a combination of organic and mineral materials, were characterised and used to develop/derive modelling design within the Model for Urban Stormwater Improvement Conceptualisation (MUSIC v6) [1]. Comparison is made to the Adoption Guidelines for Stormwater Biofiltration Systems - Summary Report [2] which were based on the Facility for Advancing Water Biofiltration (FAWB) guidelines to assist in the development of biofiltration systems, including the planning, design, construction and operation of those systems. An observed outcome from over two decades of biofiltration guideline development has been the exclusion of alternative biofilter materials due to claims of excessive leaching. Results from this study indicate that high nutrient and metal removal rates can be achieved over a range of hydraulic conductivities using design mixes of recycled organic and mineral materials that have a demonstrated equivalence to existing guideline specifications.

The interest on the use of renewable energy resources is increasing, especially towards wind and hydro powers, which should be efficiently converted into electric energy via suitable technology tools. To this aim, data--driven control techniques represent viable strategies that can be employed for this purpose, due to the features of these nonlinear dynamic processes working over a wide range of operating conditions, driven by stochastic inputs, excitations and disturbances. Some of the considered methods, such as fuzzy and adaptive self--tuning controllers, were already verified on wind turbine systems, and similar advantages may thus derive from their appropriate implementation and application to hydroelectric plants. These issues represent the key features of the work, which provides some guidelines on the design and the application of these control strategies to these energy conversion systems. The working conditions of these systems will be also taken into account in order to highlight the reliability and robustness characteristics of the developed control strategies, especially interesting for remote and relatively inaccessible location of many installations.

In modern Commercial Off-The-Shelf (COTS) multicore systems, cores can produce several simultaneous memory requests. The processing of such requests over the memory controller negatively impacts the interference delay triggered by running parallel tasks on the platform. In this paper, we propose a software-based testing approach for analyzing memory interference delay, when cores are exposed to extensive read/write requests that access in parallel their Cache Coherent Interconnect. The hardware targeted in this work is the well-known LayerScape QorIQ LS2085A, which can be approached as a potential successor to the Freescale QorIQ P4080. The test analysis was conducted based on a bare-metal operating system that we developed to guarantee a deterministic execution environment at all time points. Our testing was accomplished using a set of carefully designed synthetic benchmarks as well as TACLeBench benchmarks.

This study addresses the latent construct of attitudes towards environmental conservation based on study participant’s responses. We measured and evaluated the latent scale based on an 18-item scale instrument, over four experimental strata (N=945) in the US Virgin Islands and the Caribbean. We estimated the latent scale reliability and validity. We further fitted multiple alternative two-parameter logistic (2PL) and graded response models (GRM) from Item-Response Theory. We finally constructed and fitted equivalent structural and generalized structural equation models (SEM/GSEM) for the attitudinal latent scale. All scale measures (composite, alpha-based, IRT-based and SEM-based) were consistently and reliably valid measures of the study participants’ latent attitudes toward conservation. We found statistically significant differences among participant’s attributes relating to socio-demographic, physical and core environmental characteristics of participants. We assert that the nature of relationship between cognitive attitudes and individual as well as social behavior related to environmental conservation.

This paper establishes methods that quantify the structure of statistical interactions within a given data set using the characterization of information theory in cohomology by finite methods, and provides their expression in terms of statistical physic and machine learning. Following [1–3], we show directly that k multivariate mutual-informations (I_k) are k-coboundaries. The k-cocycles are given by I_k = 0, which generalize statistical independence to arbitrary dimension k. The topological approach allows to investigate Shannon’s information in the multivariate case without the assumptions of independent identically distributed variables. We develop the computationally tractable subcase of simplicial information cohomology represented by entropy H_k and information I_k landscapes. The I₁ component defines a self-internal energy functional U_k, and (−1)^k I_k,k≥2 components define the contribution to a free energy functional G_k of the k-body interactions. The set of information paths in simplicial structures is in bijection with the symmetric group and random processes, provides a topological expression of the 2nd law and points toward a discrete Noether theorem (1st law). The local minima of free-energy, related to conditional information negativity and the non-Shannonian cone of Yeung [4], characterize a minimum free energy complex. This complex formalizes the minimum free-energy principle in topology, provides a definition of a complex system, and characterizes a multiplicity of local minima that quantifies the diversity observed in biology. Finite data size effects and estimation bias severely constrain the effective computation of the information topology on data, and we provide simple statistical tests for the undersampling bias and for the k-dependences following [5]. We give an example of application of these methods to genetic expression and cell-type classification. The maximal positive I_k identifies the variables that co-vary the most in the population, whereas the minimal negative I_k identifies clusters and the variables that differentiate-segregate the most. The methods unravel biologically relevant I₁₀ with a sample size of 41. It establishes generic methods to quantify the epigenetic information storage and a unified epigenetic unsupervised learning formalism.

Energy storage has become a fundamental component in renewable energy systems, especially those including batteries. However, during the charging and the discharging process, there are some parameters that are not controlled by the user. That uncontrolled working leads to aging of the batteries and a reduction of their life cycle. Therefore, it causes an early replacement. Different control methods have been developed with the goal of protecting the battery and extending its life expectancy, being the most used the constant current-constant voltage. However, several studies show that charging time can be reduced by using Fuzzy Logic Control or Model Predictive Control. Other benefits are; temperature control and an extension of life expectancy. For all these reasons, FLC and MPC have proven to be more efficient than traditional charge control methods.

This research not only dedicated a less restrictive method of iteration-varying function for a learning control law to design a controller but also synchronize two nonlinear systems with free time-delay. In addition, the mathematical theory of system synchronization has proved rigorously and the theory verified through an example to demonstrate the behavior of each parameter in the theory. The design of a controller using the iterative learning control law is significant for robotic tracking. The controller in this research generates a feed-forward control input using the error dynamics among the drive-response systems. The error dynamics satisfies the Lyapunov function and the combination of output errors, which respectively represented relative estimated differences of the drive-response systems. The iterative learning control rule serves the function of a filter adding previous control error after the end of each iteration. The numerical example of a synchronous system is given a Lorenz system for driving and another with the iterative learning control law for response under different initial condition. The results verify and demonstrate the proposed mathematical theory. The simulation exhibits consistency in the behavior of each parameter to match mathematical theory.

In this article we present the design and development of T-Shirt prototypes that embed novel textile sensors for the capture of cardio and respiratory signals. The sensors are connected through textile interconnects to either an embedded custom designed data acquisition and transmission unit or to snap fastener terminals for connection to external monitoring devices. Prototypes with diverse approaches of integration are presented. The performance of the wearable systems is addressed in terms of signal-to-noise ratio amplitude and signal interference caused by baseline wander and motion artifacts, through laboratorial tests with subjects in standing and walking conditions. Performance tests were also conducted in Hospital environment using a T-Shirt prototype connected to a commercial 3-channel Holter monitoring device. The textile sensors and interconnects were realized with the assistance of an industrial 6-needle digital embroidery tool and their resistance to wear addressed with normalized tests of laundering and abrasion. The main aspects of the system´s design leading to major improvements and failure factors are discussed. Pathways and methods for the overall system´s optimization are highlighted.

The emergence of cloud computing, big data analytics, and machine learning has catalysed the use of remote sensing technologies to enable more timely land management of sustainability indicators such as ground cover and grassland biomass, given the uncertainty of future climate and drought conditions. Here, we examine the potential of “regenerative agriculture”, as an adaptive grazing management strategy to minimise bare ground exposure while maximising pasture biomass productivity. High-intensity sheep grazing treatments were conducted in small fields (less than 1 hectare) for short durations (typically less than 1 day). Paddocks were subsequently spelled to allow pasture biomass recovery (treatments comprising 3, 6, 9, 12, and 15 months) with each compared with control treatments with lighter stocking rates for longer periods (2,000 DSE). Pastures were composed of wallaby grass (Austrodanthonia species), kangaroo grass (Themeda triandra), Phalaris (Phalaris aquatica, and cocksfoot (Dactylis glomerata) were destructively sampled to estimate total standing dry matter (TSDM), standing green biomass, standing dry biomass and trampled biomass. We then invoked a machine learning model using Sentinel-2 imagery to quantify TSDM, standing green biomass and standing dry biomass. Faced with La Nina conditions, regenerative grazing did not significantly impact pasture productivity, with all treatments showing similar TSDM and green biomass. However, regenerative treatments significantly impacted litter fall and trampled material, with the high intensity grazing treatments causing more dry matter trampling, increasing litter, enhancing decomposition rates and surface organic matter. Pasture digestibility was greatest for treatments with minimal spelling (3 months), whereas both standing senescent and trampled material were significantly greater for the treatment with 15-month spell periods. Estimates of TSDM using machine learning with Sentinel-2 imagery underestimated TSDM in treatment plots but explained spatiotemporal variability associated within and across treatments. The root mean square error between the measured and modelled TSDM was 903 kg DM/ha, which was less than the variability measured in the field. We conclude that regenerative grazing with short recovery periods (3-6 months) are most conducive to increasing pasture production under high rainfall conditions, and we speculate that high intensity grazing is likely to positively impact on soil organic carbon through increased litterfall and trampling. Our study paves the way forward for using machine learning with satellite imagery to quantify pasture biomass at small scales, enabling management of pastures from afar.

The emergence of precision and digital livestock farming presents an opportunity for sustainable animal farming practices that enhance animal welfare and health. However, this transformation of modern animal farming through digital technology has several implications for the technological, social, economic, and environmental aspects of farming. It is crucial to analyze the ethical considerations associated with the digitalization of modern animal farming, particularly in the context of human-animal relationships and potential objectification. This analysis can help develop frameworks for improving animal welfare and promoting sustainability in animal farming.One of the primary ethical concerns of digital livestock farming is the potential for a digital divide between farmers who have access to advanced technologies and those who do not. This could lead to a disparity in animal welfare and health outcomes for different groups of animals. Additionally, the use of artificial intelligence in digital livestock farming may lead to a loss of personal connection between farmers and animals, which could impact the animal's well-being. Another ethical concern of digital livestock farming is the potential for objectification of animals as mere data points. The use of sensors and other monitoring technologies can provide valuable data on animal health and behavior, but it is important to remember that animals are sentient beings with complex emotional and social needs. The use of digital technologies should not lead to neglect of animal welfare or a lack of human responsibility towards animals.Furthermore, social context becomes essential while integrating technologies in the livestock farming to overcome ethics. By considering the cultural and societal norms of different communities, we can ensure that the use of digital technologies does not undermine these values. To address these ethical challenges, the development of standards and codes of conduct for the adoption and implementation of digital livestock farming tools and platforms can help ensure that animal welfare and sustainability are prioritized. This can help alleviate the privacy concerns of stakeholders and improve sustainability in animal farming practices. Additionally, the use of virtual and augmented reality technologies can provide a way to enhance human-animal interactions and provide more personalized care to animals, further promoting animal welfare.

Unmanned agricultural tractor (UAT) represents the advanced stage of autonomous navigation and serves as a core technology in agricultural production. It reduces the operator’s workload, and improves operational accuracy and efficiency. This article reviews three aspects of key autonomous navigation technologies for UATs: perception, path planning and tracking, and motion control. The advantages, and shortages of these key technologies on UATs are clarified by analyzing technical principles and the current research status. We conducted summaries and analyses of existing unmanned navigation solutions for different application scenarios in order to identify current bottleneck issues. Based on the analysis of the applicability of key autonomous navigation technologies on UATs, it can be seen that fruitful research progresses have been achieved. The review also summarizes the common problems in current technologies. The application research on sharing and integrating multi-source data for autonomous navigation are relatively weak. There is an urgent need of high-precision, and high-stability sensing equipment. The universality of path planning methods, and the efficiency and precision of path tracking need to be improved. It is necessary to develop high reliability electrical control modules to enhance motion control performance. Overall, advanced sensors, high-performance intelligent algorithms, and reliable electrical control hardware are key factors in promoting the development of UAT technology.

ABSTRACT Heavy metals have been classified as dangerous environmental pollutants. Interest in feasible ways to reduce heavy metals pollution is a noble goal. Adsorption is an effective method based on its effectiveness and low- cost. Nowadays, low-cost bio-sorbents have been utilized to replace costly expensive adsorbents. Rich cellulose materials are effective heavy metal adsorbents, and their performance can be enhanced via chemical modification. The present work reviews the steady progress in the utilization of agriculture by-product wastes as heavy metal bio-sorbent. The unique advantages of these by-products such as renewability, abundance, simple processing, and low cost, justifier this work. The results confirm that the chemically treated agro-wastes exhibit high- removal efficiency (reaches 95% in most cases). The adsorption isotherm studies indicate that the concentration of the metal ions has a significant effect on the adsorption process. The Freundlich model provides a physical adsorption model of the metal ions on the bio-sorbent surface. Langmuir isotherm offers an estimate of the effect of different factors on the efficiency of the process. The adsorption kinetics studies offer an idea of reaction pathways including the adsorption mechanism and the efficiency of the metal ion removal. Applying the pseudo-first-order and pseudo-second-order models describes the adsorption kinetics. This information can be utilized in developing effective strategies to remove heavy metal ions using chemically treated agro-waste. The data confirmed that chemical modification is a significant parameter in the efficiency of metal ion removal. The feasibility and effectiveness of using these cellulosic by-products as bio-sorbent should be given attention and encouraged.

The improvement of agricultural low-carbon efficiency is an important path to promote the realization of the "double carbon" goal in the Yellow River Basin. In the context of rapid urbanization development, it is of great significance to explore whether the promotion of urbanization will affect the agricultural low-carbon efficiency. Based on the panel data of 75 cities in the Yellow River Basin from 2000 to 2020, this paper uses super-DEA model, three-dimensional kernel density model and Markov chain model to measure and analyze the spatio-temporal evolution of agricultural low-carbon efficiency in the Yellow River Basin, on this basis, the panel Tobit model is used to analyze the relationship between urbanization and low-carbon efficiency in agriculture. The results show that: (1) The level of agricultural low-carbon efficiency in the Yellow River Basin is low and has not reached the effective state, showing a slow downward trend in general, among which, the agricultural low-carbon efficiency in the lower reaches is higher than that in the middle reaches, and the upper reaches is the lowest. (2) The agricultural low-carbon efficiency in the Yellow River Basin has a negative trend of transferring to the low level on the whole, and tends to maintain the original state level, and it is difficult to realize the leapfrog transfer between states. Agricultural low-carbon efficiency has obvious spatial spillover effect and "club convergence" phenomenon, high efficiency area has a positive driving effect on the neighborhood area, while low efficiency area has a negative impact on the neighborhood area. (3) The level of urbanization has a significant positive impact on the low-carbon efficiency of agriculture in the upper, middle and lower reaches of the Yellow River Basin, which plays an important role in promoting the green development of agriculture. Finally, based on the above research conclusions, relevant policy recommendations were put forward, in order to provide references for promoting the improvement of low-carbon agricultural efficiency and promoting high-quality agricultural development in the Yellow River Basin.

This paper systematically identifies the constructs and indicators to measure Sri Lankan rice farmers’ Sustainable Agriculture potential (SAP) in the regions of Mahaweli Block H in Anuradhapura district, a dominant rice cultivation district in the country. Insights from Rural Livelihood Assessment Framework helped identify the primary constructs of SAP: The constructs of farmers’ SAP are derived as Human, Social, Financial, Physical, and Natural capitals. The principles of Sustainable Agriculture discussed in modern literature and the various research studies carried out in this domain are insightful to derive an exhaustive list of indicators that might adequately explain the constructs of SAP. The researcher adopted a quantitative descriptive approach, developed a comprehensive set of indicators (130), pre-tested them, and conducted a pilot survey with 64 samples. The measurement model analysis techniques in PLS-SEM helped shorten the Questionnaire with the most productive questions (87). This short-listed Questionnaire was again surveyed in a larger sample space, 386, to attest to their validity further. The study found five constructs and 87 productive questions that can explain farmers’ SAP, and the researcher believes that these compositions of SAP and the indicators will be helpful for future researchers.

In recent years, weeds is responsible for most of the agricultural yield losses. To deal with this threat, farmers resort to spraying pesticides throughout the field. Such method not only requires huge quantities of herbicides but impact environment and humans health. One way to reduce the cost and environmental impact is to allocate the right doses of herbicide at the right place and at the right time (Precision Agriculture). Nowadays, Unmanned Aerial Vehicle (UAV) is becoming an interesting acquisition system for weeds localization and management due to its ability to obtain the images of the entire agricultural field with a very high spatial resolution and at low cost. Despite the important advances in UAV acquisition systems, automatic weeds detection remains a challenging problem because of its strong similarity with the crops. Recently Deep Learning approach has shown impressive results in different complex classification problem. However, this approach needs a certain amount of training data but, creating large agricultural datasets with pixel-level annotations by expert is an extremely time consuming task. In this paper, we propose a novel fully automatic learning method using Convolutional Neuronal Networks (CNNs) with unsupervised training dataset collection for weeds detection from UAV images. The proposed method consists in three main phases. First we automatically detect the crop lines and using them to identify the interline weeds. In the second phase, interline weeds are used to constitute the training dataset. Finally, we performed CNNs on this dataset to build a model able to detect the crop and weeds in the images. The results obtained are comparable to the traditional supervised training data labeling. The accuracy gaps are 1.5% in the spinach field and 6% in the bean field.

The rapid evolution of digital payment systems has significantly transformed the retail industry, reshaping how transactions are processed and enhancing the overall shopping experience. This research explores the adoption of digital payment technologies in retail settings, focusing on the motivations, challenges, benefits, and impacts associated with their implementation. Retailers are increasingly driven by the need to meet consumer demands for convenience and speed, as well as to gain a competitive edge in a saturated market. Digital payment systems, including mobile wallets, contactless payments, and online payment gateways, have become essential tools for retailers seeking to streamline operations and improve customer satisfaction. The study highlights several key findings, including the challenges related to technical integration, security concerns, and cost implications. Technical difficulties in integrating new payment systems with existing point-of-sale infrastructure, coupled with the need for robust security measures, present significant obstacles. Despite these challenges, the long-term benefits of digital payments, such as increased transaction volumes, higher average transaction values, and valuable data insights, often outweigh the initial investment and ongoing costs. The research also underscores the positive impact of digital payments on customer behavior, noting improvements in transaction speed, convenience, and overall satisfaction. Furthermore, the findings reveal variations in the impact of digital payment systems across different retail settings, including large department stores, independent retailers, and e-commerce businesses. The ability to tailor digital payment solutions to the specific needs of each retail environment is crucial for maximizing benefits and ensuring successful implementation. Overall, the study provides a comprehensive understanding of the role of digital payment systems in modern retail and offers insights into the future trajectory of these technologies.

Recommender Systems (RecSys) are crucial in managing information overload and enhancing user satisfaction across various digital platforms, including e-commerce and entertainment. Evolving from traditional models to Deep Neural Networks (DNNs) and, more recently, Large Language Models (LLMs), these systems leverage sophisticated algorithms to analyze user behaviors and preferences. LLMs, such as GPT-4, are trained on extensive datasets to comprehend and generate natural language, significantly advancing their ability to deliver personalized recommendations. This tutorial explores the transformative impact of LLMs on RecSys, discussing their development, application in handling complex datasets, and the integration of contextual insights. Real-world examples illustrate how LLMs enhance recommendation accuracy and user experience, highlighting challenges and future directions in the field.

Quantum theory predicts violations of Bell’s inequality. This implies a contradiction with at least one of three statistical conditions, known as “Realism” (joint distribution of relevant observables), “Locality” (conditional separability of pairwise observations, given a set of hidden variables), and “Free Will” (statistical independence between hidden variables and measurement settings). Here we describe a classical system with “clockwork” properties that is unquestionably local. It produces maximal violations of the Clauser-Horne-Shimony-Holt (CHSH) inequality. It contradicts every one of the three listed formal conditions. Nonetheless, it expresses the qualitative markers of ontological Realism, ontological Locality, and ontological Free Will, all at the same time. In other words, the three listed conditions do not correspond to the three ontological concepts with the same names. Therefore, there is no conflict between quantum theory and Local Realism.

This review aims to comprehensively synthesize the most recent research, collected from reputable databases, focusing specifically on transmission line. It examines advancements and challenges in data transmission. Fiber optics remains dominant, with new fiber designs and signal processing techniques like SDM improving capacity. Researchers are also addressing signal distortion and crosstalk. Beyond fiber optics, the review explores findings in coaxial cables and the promise of graphene for future high-speed transmission. Novel methods for mitigating crosstalk are presented. The findings highlight a trend towards more dependable, effective, and versatile transmission methods, with implications for various industries and electronic systems.

In contrast to “frank” pathogens, like Salmonella entrocolitica, Shigella dysenteriae, and Vibrio cholerae, that always have a probability of disease, “opportunistic” pathogens are organisms that cause an infectious disease in a host with a weakened immune system and rarely in a healthy host. Historically, drinking water treatment has focused on control of frank pathogens, particularly those from human or animal sources (like Giardia lamblia, Cryptosporidium parvum, or Hepatitis A virus), but in recent years outbreaks from drinking water have increasingly been due to opportunistic pathogens. Characteristics of opportunistic pathogens that make them problematic for water treatment include: 1) they are normally present in aquatic environments, 2) they grow in biofilms that protect the bacteria from disinfectants, and 3) under appropriate conditions in drinking water systems (e.g., warm water, stagnation, low disinfectant levels, etc.) these bacteria can amplify to levels that can pose a public health risk. The three most common opportunistic pathogens in drinking water systems include Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa. This report focuses on these organisms to provide information on their public health risk, occurrence in drinking water systems, susceptibility to various disinfectants and other operational practices (like flushing and cleaning of pipes and storage tanks). In addition, information is provided on a group of nine other opportunistic pathogens that are less commonly found in drinking water systems, including Aeromonas hydrophila, Klebsiella pneumoniae, Serratia marcescens, Burkholderia pseudomallei, Acinetobacter baumannii, Stenotrophomonas maltophilia, Arcobacter butzleri, and several free-living amoebae including Naegleria fowleri and species of Acanthamoeba. The public health risk for these microbes in drinking water is still unclear, but in most cases, efforts to manage Legionella, mycobacteria, and Pseudomonas risks will also be effective for these other opportunistic pathogens. The approach to managing opportunistic pathogens in drinking water supplies focuses on controlling the growth of these organisms. Many of these microbes are normal inhabitants in biofilms in water, so the attention is less on eliminating these organisms from entering the system and more on managing their occurrence and concentrations in the pipe network. With anticipated warming trends associated with climate change, the factors that drive the growth of opportunistic pathogens in drinking water systems will likely increase. It is important, therefore, to evaluate treatment barriers and management activities for control of opportunistic pathogen risks. Controls for primary treatment, particularly for turbidity management and disinfection, should be reviewed to ensure adequacy for opportunistic pathogen control. However, the major focus for the utility’s opportunistic pathogen risk reduction plan is the management of biological activity and biofilms in the distribution system. Factors that influence the growth of microbes (primarily in biofilms) in the distribution system include, temperature, disinfectant type and concentration, nutrient levels (measured as AOC or BDOC), stagnation, flushing of pipes and cleaning of storage tank sediments, and corrosion control. Pressure management and distribution system integrity are also important to the microbial quality of water but are related more to the intrusion of contaminants into the distribution system – rather than directly related to microbial growth. Summarizing the identified risk from drinking water, the availability and quality of disinfection data for treatment, and guidelines or standards for control showed that adequate information is best available for management of L. pneumophila. For L. pneumophila the risk for this organism has been clearly established from drinking water, cases have increased worldwide, and it is one of the most identified causes of drinking water outbreaks. Water management best practices (e.g., maintenance of a disinfectant residual throughout the distribution system, flushing and cleaning of sediments in pipelines and storage tanks, among others) that have been shown to be effective for control of L. pneumophila in water supplies. In addition, there are well documented management guidelines available for the control of the organism in drinking water distribution systems. By comparison, management of risks for Mycobacteria from water are less clear than for L. pneumophila. Treatment of M. avium is difficult due to its resistance to disinfection, the tendency to form clumps and attachment to surfaces in biofilms. Additionally, there are no guidelines for management of M. avium in drinking water and one risk assessment study suggested a low risk of infection. The role of tap water in the transmission of the other opportunistic pathogens is less clear and in many cases actions to manage L. pneumophila (e.g., maintenance of a disinfectant residual, flushing, cleaning of storage tanks, etc.) will also be beneficial in helping to manage these organisms as well.

Effective management of water distribution systems requires an integrated approach, but none of the available frameworks for one are in broad use in the water supply industry. Frameworks developed include a management standard of the American Water Works Association and Distribution System Optimization, a methodology for physical, hydraulic, and water quality performance assessment. The intelligent systems framework also offers a pathway to integration, but it lacks a definite structure. The voluntary aspect of adopting innovations within the fragmented and unregulated nature of the water utility industry poses a barrier to adoption of such innovations. Another barrier is the uncoordinated arrangements of water research stakeholders with different incentive structures. Intelligent water systems offer a way to incentive utilities to encourage implementation. They can provide a bottom-up approach where utilities see advantages, as opposed to a top-down approach where they are expected to adopt a method without seeing clear benefits. Research to develop new and improved tools is needed, but the research roadmap should prioritize implementation.

The systems for automated monitoring of a human’s personal carbon footprint and CO2-equivalent emissions at industrial enterprises were developed in the article. The personal carbon footprint monitoring system includes data collection subsystems based on energy consumption metering devices, data storage and transmission, and calculation subsystems. To measure the consumption of water, electricity, thermal energy, IoT control sensors were selected. The calculation of the individual carbon footprint of a person is proposed. The system for automated monitoring of the carbon footprint of an enterprise includes a subsystem of devices for monitoring the use of energy resources, a subsystem for data transmission, calculation and prompt display of the carbon footprint. Selected devices for monitoring the consumption of water, energy and heat resources with data transfer to the SCADA system. An algorithm for calculating the carbon footprint of an enterprise is proposed. Structural schemes for automated carbon footprint control have been developed.

We discuss two queueing-inventory systems with catastrophes in the warehouse. Catastrophes occur according to Poisson process and upon arrival of a catastrophe all inventory in the system is instantly destroyed. But consumer customers in the system (in the server or in the buffer) continue still waiting for the replenishment of the stock. The arrivals of the consumer customers follow a Markovian Arrival Process (MAP) and they can be queued in an infinite buffer. Service time of a consumer customer follows a phase-type distribution. The system receives negative customers whose have Poisson flows to service facility and upon arrival of a negative customer one consumer customer is pushed out from the system, if any. One of two replenishment policies can be used in the system: either (s,S) or (s,Q). If upon arrival of the consumer customer, the inventory level is zero, then according to the Bernoulli scheme, this customer is either lost (lost sale scheme) or join the queue (backorder sale scheme). The system is formulated by a four-dimensional continuous-time Markov chain. Steady state distribution is obtained using the matrix-geometric method. A comprehensive numerical study is performed on the performance measures under various replenishment policies. Finally, an optimization study is presented.

Nanofiber-based systems have emerged as a groundbreaking approach in the field of regenerative medicine, offering immense potential for tissue engineering and regenerative therapies. These systems, composed of nanoscale fibers, provide a unique platform for mimicking/bio-mimicking the complex structures and functionalities of native tissues, enabling the regeneration of injured tissues. This letter aims to provide a brief overview of nanofiber-based systems in regenerative medicine, discovering their importance, design, and fabrication techniques, characterization, biocompatibility, applications, challenges, and future directions as well as discussing key concepts and techniques involved in the development of this innovative tool.

The rapid growth of Artificial Intelligence (AI) has led to considerable progress in Automated Fact Verification (AFV). This process involves collecting evidence for a statement, assessing its relevance, and predicting its accuracy. Recently, research has begun to explore automatic explanations as an integral part of the accuracy analysis process. However, the explainability within AFV is lagging compared to the wider field of explainable AI (XAI), which aims at making AI decisions more transparent. This study looks at the notion of explainability as a topic in the field of XAI, with a focus on how it applies to the specific task of Automatic Fact Verification. It examines the explainability of AFV, taking into account architectural, methodological, and dataset-related elements, with the aim of making AI more comprehensible and acceptable to the general society. Although there is a general consensus on the need for AI systems to be explainable, there a dearth of systems and processes to achieve it. In this research, we investigate the concept of explainable AI in general and demonstrate its various aspects through the particular task of Automated Fact Verification. We explore topic of faithfulness in the context of local and global explainability and how these correspond with architectural, methodological and data-based ways of achieving it. We examine these concepts for the specific case of AFV and analyze the current datasets used for AFV and how they can be adapted to further the identified aims on XAI. The paper concludes by highlighting the gaps and limitations in current data science practices and possible recommendations for modifications in architectural and data curation processes that would further the goals of XAI.

In this paper, we introduce ResNetMF, a groundbreaking approach that harnesses the power of residual network matrix factorization to revolutionize recommendation systems. ResNetMF integrates residual networks, renowned for their ability to capture intricate patterns and features, with matrix factorization techniques that excel in modelling user-item interactions. This fusion presents a novel solution that surpasses the limitations of traditional recommendation systems. Through comprehensive experimentation and evaluation of diverse datasets, ResNetMF demonstrates remarkable enhancements in recommendation accuracy and efficiency. By effectively capturing both linear and nonlinear relationships in user-item interactions, ResNetMF provides superior recommendation quality. The outcomes from experiments unequivocally highlight the superiority of ResNetMF over existing state-of-the-art recommendation approaches, thereby validating its innovative nature and underscoring its potential to shape the future of recommendation systems. Through the integration of the deep residual network, ResNetMF approach facilitates the training of neural networks, enabling them to explore the underlying data layers more comprehensively. Extensive experimentation and evaluation across various datasets provide compelling evidence for the superiority of ResNetMF. Moreover, the proposed method utilized natural language processing (NLP) techniques for targeted information dissemination in recommendation systems, emphasizing the importance of personalized and relevant recommendations for user satisfaction and engagement.

An overview of the link between nonequilibrium thermodynamics and complexity theory is offered. It is shown how the rate of entropy production can be quantified through the spectrum of the Lyapunov exponents. It was shown how the entropy production per unit of time meets the necessary and sufficient conditions to be a Lyapunov function and constitutes per se an extremal principle. The entropy production fractal dimension conjecture was established. It is shown how the rate of entropy production as a non-extremal criterion represents an alternative way of sensitivity analysis of differential equations. Finally, an extension to biophysical-chemical systems, on the one hand, the use of the dissipation function is shown, as a thermodynamic potential out of equilibrium, in the characterization of biological phase transitions. On the other hand, it was evidenced how the rate of entropy production represents a physical quantity to evaluate the complexity and robustness of cancer.

In recent years, the use of gamified systems in education has increased due to the growing empirical evidence of their usefulness in improving motivation and participation in learning processes. In order to take advantage of the opportunities for improvement in education presented by gamification, plus the decision to create gamified systems in higher education, this article investigates the willingness of student teachers to learn with gamified systems. The research method is quantitative with validated instruments to measure: 1) student perception of gamification; 2) player profile; and 3) screen time, with an n=569 student teachers from the fifteen regions of Chile. The results show that students prefer to learn with gamified systems than in a traditional way with a significant difference (Wilcoxon z= -18.86, p < 0.01). There are significant positive and negative relationships in correspondence with the Gamer Profile. However, as a finding, a negative relationship was found between the number of hours spent playing video games and the perception of learning through gamified systems. In conclusion, Chilean student teachers present a favorable disposition to teacher training with gamified systems. However, the disposition varies in relation to the number of hours spent playing video games.

This paper proposes a new battery balancing control strategy based on state of charge (SOC) for addressing the problem of cell-to-cell differences in lithium-ion battery systems. The strategy utilizes a reconfigurable converter system to transfer energy from high-SOC battery modules to low-SOC battery modules and allows balancing the battery modules while they are powering the load. A MATLAB/Simulink simulation model with five batteries was built to validate the effectiveness of the proposed balancing strategy under unloaded and loaded conditions. The simulation results demonstrate that the proposed strategy achieves more efficient and accurate battery module balancing compared to the previous balancing modes, thus increasing the overall lifespan and safety of the battery pack.

In recent years, Cloud Computing and Big Data have been considered the most attractive areas that are revolutionizing the IT world. Cloud Computing paradigm has recently appeared that allows running proprietary or difficult portable applications outside their original software environment on one or more virtual hardware platforms. Therefore, we are to developing such techniques which make it possible to secure communication between the communicating Cloud entities. These techniques must take into account several factors due to the data transmitted in this type of environment is proprietary and of significant size. Conventional data security techniques are not suitable for today's cloud usage. Hence, the main research of this thesis is to define an adaptable architecture with the aim to propose a scalable system that supports cloud services. We will define feasible security solutions dedicated to the Cloud computing context in order to robustly protect data stored in the Cloud. We are more precisely looking for working on NoSQL databases. We also intend to propose a secure solution based on the blockchain that has powerful features like decentralization, autonomy, security, reliability, and transparency.

Unusual outbreak of Covid 19 has put the whole new challenges around the globe. In a short span of time, the world has been changed, lifestyles, social events, cultural, political events everything has been put on hold as number of countries has enforced partial or complete lockdown that resulted positive in context of controlling spread and contamination of COVID-19. Such activities have also put some effects on environment in both positive and negative way. In this study only positive impacts of COVID-19 on Environment have been highlighted that played role in regeneration of natural systems i.e., reduced air emissions, cleaner air, beaches &water bodies, reduced noise levels, biodiversity rehabilitation etc.

The evolutionary systems (ES) include software applications that solve problems using heuristic methods instead of the deterministic ones. The classical computing used for ES development involves random methods to improve different kinds of genomes. The mappings of these genomes lead to individuals that correspond to the searched solutions. The individual evaluations by simulations serve for the improvement of their genotypes. Quantum computations, unlike the classical computations, can describe and simulate a large set of individuals simultaneously. This feature is used to diminish the time for finding the solutions. Quantum Petri Nets (QPNs) can model dynamical systems with probabilistic features that make them appropriate for the development of ES. Some examples of ES applications using the QPNs are given to show the benefits of the current approach.

Cyber-Physical Systems (CPS) are integrations of computation and physical processes. Physical processes are monitored and controlled by embedded computers and networks, which frequently have feedback loops where physical processes affect computations and vice versa. To ease the analysis of a system, the costly physical plants can be replaced by high-fidelity virtual models that provide a framework for Digital-Twins (DT). This paper aims to briefly review the state-of-the-art and recent developments in DT and CPS. Three main components in CPS, including communication, control, and computation, are reviewed. Besides, the main tools and methodologies required for implementing practical DT are discussed by following the main applications of DT in the fourth industrial revolution through aspects of smart manufacturing, sixth wireless generation (6G), health, production, energy, and so on. Finally, the main limitations and ideas for future remarks are talked about followed by a short guideline for real-world application of DT towards CPS.

Biology is about structure. Structures within structures. Organs within animals, tissues within organs, cells within tissues, and molecules, often proteins within cells. The structures are so complex that they can only be described by numbers. No numbers are of more importance than those that describe proteins. The numbers that describe coordinates of its atoms, often determined by Patterson functions (which are inverse Fourier Transforms of intensities) of crystal diffraction. Without these numbers, structural biology would hardly exist. Without numbers, engineering would not exist. Numbers are surely needed by the engineers who produce the x-rays diffracting from atoms of protein crystals. Devices of engineering have function. They are built to implement equations. Engineering devices use structures to implement equations, when power is supplied at the right places, that produces appropriate flows. Flows are the essence of life. Equilibrium means death in most living systems. Flows in biological structures are hard to analyze because we do not know input output equations in advance. Sometimes we do not know their function. Flows, forces, and structures of life (like those of engineering) are related by field equations of conservation laws, partial differential equations, constrained by location and properties of structures. Constraints are boundary conditions located on the complicated domain of biological structure. Dealing with this complexity is simplified if one systematically analyzes structure using the most general field theory known, electricity described by the Maxwell equations, without significant known error. Currents are involved because flows of biology usually involve migration of charges, convection of water and solutes, diffusion of ions that form the plasma of life, and their interactions. Interactions can dominate function. Here I show how a few complex structures can be understood in engineering detail. This approach may be useful in dealing with biological and medical issues in many other cases. In one limited case—the clearance of a toxic waste (potassium ions) from the optic nerve—this approach seems to have succeeded.

As a consequence of the increasing share of renewable energies and sector coupling technologies, new approaches are needed for the study, planning, and control of modern energy systems. Such new structures may add extra stress to the electric grid, as is the case with heat pumps and electrical vehicles. Therefore, the optimal performance of the system must be estimated considering the constraints imposed by the different sectors. In this research, a dispatch optimization method with an iterative grid constraint generation, decoupled from the linear unit commitment problem, is employed. From the considered scenarios, it was found that in a typical German neighborhood with 150 households, PV penetration of ∼5kWp per household can lead to curtailment of ∼60MWh per year due to line loading. Furthermore, the proposed method eliminates grid violations due to the addition of new sectors reducing the curtailment up to 60%. With the optimization of the heat pump operation, an increase of 7% of the self-consumption was achieved with similar results for the combination of battery systems and electrical vehicles. In conclusion, a safer and optimal operation of a complex energy system is fulfilled. Safer control strategies and more accurate plant sizing could be derived from this work.

Recommender systems have been applied in a wide range of domains such as e-commerce, media, banking, and utilities. This kind of system provides personalized suggestions based on large amounts of data in order to increase user satisfaction. These suggestions help client select products, while organizations can increase the consumption of a product. In the case of social data, sentiment analysis can help gain better understanding of a user’s attitudes, opinions and emotions, which is beneficial to integrate in recommender systems for achieving higher recommendation reliability. On the one hand, this information can be used to complement explicit ratings given to products by users. On the other hand, sentiment analysis of items that can be derived from online news services, blogs, social media or even from the recommender systems themselves is seen as capable of providing better recommendations to users. In this study, we present and evaluate a recommendation approach that integrates sentiment analysis into collaborative filtering methods. The recommender system proposal is based on an adaptive architecture, which includes improved techniques for feature extraction and deep learning models based on sentiment analysis. The results of the empirical study performed with two popular datasets show that sentiment–based deep learning models and collaborative filtering methods can significantly improve the recommender system’s performance.

The world's growing population is highly dependent on animal agriculture. Animal products provide nutrient-packed meals that help to sustain individuals of all ages in communities across the globe. As the human demand for animal proteins grows, the agricultural industry must continue to advance its efficiency and quality of production. One of the most commonly farmed livestock is poultry and their significance is felt on a global scale. Current poultry farming practices result in the premature death and rejection of billions of chickens on an annual basis before they are processed for meat. This loss of life is concerning regarding animal welfare, agricultural efficiency, and economic impacts. The best way to prevent these losses is through the individualistic and/or group level assessment of animal on a continuous basis. On large-scale farms, such attention to detail was generally considered to be inaccurate and inefficient, but with the integration of Artificial Intelligence (AI) assisted technology individualized and per-herd assessments of livestock are possible and accurate. Various studies have shown cameras linked with specialized systems of AI can properly analyze flocks for health concerns, thus improving the survival rate and product quality of farmed poultry. Building on the recent advancements, this review explores the aspects of AI in the detection, counting and tracking of the poultry in commercial and research-based applications.