Quantum image representation is a widely researched area of quantum computing. Currently developed methods use angle parameter of the rotation gate (e.g., the FRQI method), sequences of qubits (ex. NEQR method) or phase shift (ex. LPIQE method) for storing color information of pixels. All of those methods are affected by decoherence and other classical and quantum noise, which is an inseparable part of quantum computing in a NISQ (Noisy Intermediate Scale Quantum) era. These all phenomenons influence the measurements, its probability distribution over the measurement basis and, as the result, makes the extracted images not even similar to those, which was stored in quantum computers. Since this process is, in its foundation, quantum as well, the computational reversal of this process is possible. There are a lot of methods for error correction, mitigation and reduction, but all of them use quantum computer time, or additional qubits to achieve desired result. We report a successful use of the Generative Adversarial Network tuned for image-to-image translation in conjunction with PDU method, for error reduction in images encoded using LIPQE (Local Phase Image Quantum Encoding) method.

This cross-country four-year longitudinal study investigated the development of processing speed throughout primary school education. The analyses were conducted on data collected from 441 schoolchildren in Grades 1, 2, 3 and 4 (aged 6.42 to 11.85 years) in the Kyrgyzstan and Russia. Mixed effects growth modeling was applied to estimate average and individual growth trajectories for processing speed at two cross-country samples. Latent class growth modeling was conducted to identify different types of growth trajectories for processing speed and to compare the distribution of the types within the analyzed samples. According to the results, processing speed significantly increases across primary school years. The trajectory is characterized by nonlinear changes with more intensive growth between Grades 1 and 2, which later slows down until Grade 4. There were no significant cross-country differences in the initial score of processing speed or developmental changes in processing speed across primary school years. The development of processing speed is described by a model with three quadratic growth types but minimally differs. It is concluded that in both samples, the development of processing speed may be characterized by homogeneity, with the most intensive growth from Grade 1 to Grade 2 and subsequent linear improvement until Grade 4.

Spinal deformity refers to a range of disorders that are defined by anomalous curvature of the spine and may be classified as scoliosis, lordosis, or kyphosis. Among these, scoliosis stands out as the most common type of spinal deformity in human beings, and it can be distinguished by abnormal lateral spine curvature accompanied by axial rotation. Accurate identification of spinal deformity is crucial for a person's diagnosis, and numerous assessment methods have been developed by researchers. Therefore, the present study aims to systematically review recent works on spinal deformity as-assessment for scoliosis diagnosis, utilizing image processing techniques. To gather relevant studies, a search strategy was conducted on three electronic databases (Scopus, ScienceDirect, and PubMed) between 2012 and 2022, using specific keywords and focusing on scoliosis cases. A total of 17 papers fully satisfied the established criteria and were extensively evaluated. Despite variations in methodological designs across the studies, all reviewed articles obtained quality ratings higher than satisfactory. Various diagnostic approaches have been employed, including artificial intelligence mechanisms, image processing, and scoliosis diagnosis systems. These approaches have the potential to save time and, more significantly, can reduce the incidence of human error. While all assessment methods have potential in scoliosis diagnosis, they possess several limitations that can be ameliorated in forthcoming studies. Therefore, the findings of this study may serve as guidelines for the development of a more accurate spinal deformity assessment method that can aid medical personnel in the real diagnosis of scoliosis.

Exploration geochemistry is an essential method for discover new mineral areas. However, with the increase of exploration degree, relying solely on "strong, broad and multiple" anomalies to guide exploration work has become increasingly challenging. How to effectively identify valuable geochemical information remains a hot and frontier topic in the field. Thus we proposed a geological connotation method (GCM) that provides an objective geological connotation to big geochemical data based on regional geological and geochemical characteristics of known typical deposits. There are mainly two types of geochemical anomalies expression: (1) the metallogenic intensity anomaly map (MIAM) obtained by accumulating specific anomalous elements, which directly reflects the degree of material exchange and superposition modification during mineralization; (2) the metallogenic type anomaly map (MTAM) obtained by accumulating the mineralization concentration coefficients of elements related to a certain genetic type, which can highlight the anomalies caused by a specific genetic type of deposit. These have been tried and applied in the exploration of the Gangdese, North Himalayas, Nyenchen Tanglha and other metallogenic belts in Tibet, and have made a series of breakthroughs in mineral resources exploration represented by Qulong, Zhunuo and Zhaxikang. The advantage of GCM is that it not only solves the problem of missing ore in the verification of "strong, broad and multiple" anomalies, but also can quickly and preferably delineate the strongest mineralized areas, and better overcome the influence of numerous factors on the anomalies, such as the chemical nature of elements, redox environment, geomorphic landscape and weathering and stripping, so that the anomaly evaluation becomes simple, objective and highlights the regularity.

The agricultural sector is undergoing a revolution that requires sustainable solutions to the challenges that arise from traditional farming methods. To address these challenges, technical and sustainable support is needed to develop projects that improve crop performance. This study focuses on the onion crop and the challenges presented throughout its phenological cycle. Aerial monitoring using unmanned aerial vehicles (UAV) and digital image processing were used to identify patterns in the onion crop, including humid areas, weed growth, vegetation deficits, and decreased harvest performance. An algorithm was developed to identify the patterns that most affected crop growth, as the average local production reported was 40.166 ton/ha, but only 25.00 ton/ha was reached due to blight caused by constant humidity and limited sunlight. This resulted in the death of leaves and poor development of bulbs, with 50% of the production being of medium size. It is estimated that approximately 20% of the production was lost due to blight and unfavorable weather conditions.

Deep-learning-based speech enhancement techniques have been recently grown in interest, since their impressive performance can potentially benefit a wide variety of digital voice communication systems. However, such performance has been evaluated mostly in offline audio processing scenarios (i.e. feeding the model, in one go, a complete audio recording, which may extend several seconds). It is of great interest to evaluate and characterize the current state-of-the-art in applications that process audio online (i.e. feeding the model a sequence of segments of audio data, concatenating the results at the output end). Although evaluations and comparisons between speech enhancement techniques have been carried out before, as far as the author knows, the work presented here is the first that evaluates the performance of such techniques in relation to their online applicability. Meaning, this work measures how the output signal-to-interference ratio (as a separation metric), the response time and memory usage (as online metrics) are impacted by the input length (the size of audio segments), in addition to the amount of noise, amount and number of interferences, and amount of reverberation. Three popular models were evaluated, given their availability on public repositories and online viability: MetricGAN+, Spectral Feature Mapping with Mimic Loss, and Demucs-Denoiser. The characterization was carried out using a systematic evaluation protocol based on the Speechbrain framework. Several intuitions are presented and discussed, and some recommendations for future work are proposed.

Version Control and Source Code Management Systems, such as GitHub, contain large amount ofunstructured historical information of software projects. Recent studies have introduced Natural Language Processing (NLP) to help software engineers retrieve information from very large collection of unstructured data. In this study, we have extended our previous study by increasing our datasets and ML and clustering techniques. Method: We have followed a complex methodology made up of various steps. Starting from the raw commit messages we have employed NLP techniques to build a structured database. We have extracted their main features and used as input of different clustering algorithms. Once labelled each entry, we have applied supervised machine learning techniques to build a prediction and classification model. Results: We have developed a machine learning-based model to automatically classify commit messages of a software project. Our model exploits a ground-truth dataset which includes commit messages obtained from various GitHub projects belonging to the HEP context. Conclusions: The contribution of this paper is two-fold: it proposes a ground-truth database; it provides a machine learning prediction model. They automatically identify the more change-proneness areas of code. Our model has obtained a very high average precision, recall and F1-score.

Use of porous titanium (Ti) and Ti alloys in orthopedic implants or in light structures requires processing routes that could generate an as-much-as possible control in the pores amount, shape, size and connectivity. In this work, a colloidal approach to the processing of Ti porous structures by the inside foaming of a porogen into a gelled high solid content aqueous suspension of Ti powders, is presented. The prepared slurries contained different amounts of Methyl Cellulose (MC) as gelling agent (8, 10 and 12 g/L) and ammonium bicarbonate (BA) as porogen (15, 20, 25 wt. %). The gel-casted samples were heated at mild temperatures ranging (60, 70 and 80 °C) to promote the gelation and produce, at the same time, the porosity by the thermal decomposition of the ammonium bicarbonate. Different structures are obtained depending on the combination of the study variables

Amorphous silicon (α-Si) film present an inexpensive and promising material for optoelectronic and nanophotonic applications. Its basic optical and optoelectronic properties are known to be improved via phase transition from amorphous to polycrystalline phase. Infrared femtosecond laser radiation can be considered as a promising nondestructive and facile way to drive uniform in-depth and lateral crystallization of α-Si films that are typically opaque in UV-visible spectral range. However, so far only a few studies reported on utilization of near-IR radiation for laser-induced crystallization of α-Si providing no information regarding optical properties of the resultant polycrystalline Si films. The present work demonstrates efficient and gentle single-pass crystallization of α-Si films induced by their direct irradiation with near-IR femtosecond laser pulses coming at sub-MHz repetition rate. Comprehensive analysis of morphology and composition of laser-annealed films by atomic-force microscopy, optical, micro-Raman and energy-dispersive X-ray spectroscopy, as well as numerical modeling of optical spectra, confirmed efficient crystallization of α-Si and high-quality of the obtained films. Moreover, we highlight localized laser-driven crystallization of α-Si as a promising way for optical information encryption, anti-counterfeiting and fabrication of micro-optical elements.

Resource Description Framework(RDF) is a data representation format of the Semantic Web, and its data volume is growing rapidly. Cloud-based systems provide a rich platform for managing RDF data. However, the distributed environment has performance challenges when it is processing with RDF queries that contain multiple join operations, such as network reshuffle, memory overhead. To get over these challenges, this paper proposed a spark-based RDF query architecture, which is based on Semantic Connection Set (SCS). First of all, this spark-based query architecture adopts the mechanism of re-partitioning class data based on vertical partitioning, which can reduce memory overhead and fast index data. Secondly, a method for generating query plans based on semantic connection sets is proposed in this paper. In addition, statistics and broadcast variable optimization strategies are used to reduce shuffling and data communication costs. The experiment of this paper is based on the latest SPARQLGX on the spark platform RDF system, two synthetic benchmarks are used to evaluate the query. The experiment result illustrates that the proposed approach in this paper is more efficient in data search than SPARQLGX.

In the neuroscience research field, specific for medical imaging analysis, how to mining more latent medical information from big medical data is significant for us to find the solution of diseases. In this review, we focus on neuroimaging data that is functional Magnetic Resonance Imaging (fMRI) which non-invasive techniques, it already becomes popular tools in the clinical neuroscience and functional cognitive science research. After we get fMRI data, we actually have various software and computer programming that including open source and commercial, it's very hard to choose the best software to analyze data. What's worse, it would cause final result imbalance and unstable when we combine more than software together, so that's why we want to make a pipeline to analyze data. On the other hand, with the growing of machine learning, Python has already become one of very hot and popular computer programming. In addition, it is an open source and dynamic computer programming, the communities, libraries and contributors fast increase in the recent year. Through this review, we hope that can make neuroimaging data analysis more easy, stable and uniform base the one platform system.

Synthesis of activated carbon from waste biomass is of current interest towards sustainability. The properties of biomass derived activated carbon largely depends on the carbonization process. This study reports preparing extremel high surface area mesoporous activated carbon from hemp bast fibre using hydrothermal processing. Processing in hot water (390-500^oC), then activation using KOH and NaOH was investigated at different loading ratios. The described approach was found to enhance the mesoporosity (centered at 3.0 to 4.5 nm) of the hemp derived activated carbon (HAC) from activation (confirmed by BJH pore size distribution and TEM imaging). BET results showed that the product has an extremely high surface area (2425 m²/g) while the surface functional groups (-OH, COOH, C=C/C-C) were confirmed and quantified by XPS and FTIR results. Increasing KOH concentration was found to enhance the surface area with an optimum biochar to KOH ratio of 1:3. The crystallite domain size of HAC was determined using Raman spectroscopy of different wavelengths. The procedure described in this study is an environmentally friendly scalable route for the mass production of activated carbon using hemp fiber.

The goal of this study is to find out how some properties of wood-polymer nanocomposites are affected by the processing technology, the nanomaterials, and the ratio of coupling agents. To meet this objective, the extruded and dry blended samples are made from wood flour with MAPP, ZnO nanoparticles (0, 1, 3, and 5 wt%), and polypropylene. The mechanical properties of the nanocomposites improve significantly with ZnO and MAPP loading. Due to the more homogeneous structure of nanocomposites, better mechanical results are obtained with the extrusion method. With ZnO and MAPP loading, the thermal stability of nanocomposites improves. The storage and loss modulus values indicate that the processing technology of nanocomposites could be a key factor in the resistance of the materials obtained by extrusion. The storage and loss modulus of nanocomposites manufactured by the extrusion technology are determined to be higher than those of the samples produced by the dry blending method.

Coronavirus, also known as COVID-19, has been declared a pandemic by the World Health Organization (WHO). At the time of conducting this study, it had recorded over 1.6 million cases while more than 105,000 have died due to it, with these figures rising on a daily basis across the globe. The burden of this highly contagious respiratory disease is that it presents itself in both symptomatic and asymptomatic patterns in those already infected, thereby leading to an exponential rise in the number of contractions of the disease and fatalities. It is therefore crucial to expedite the process of early detection and diagnosis of the disease across the world. The case-based reasoning (CBR) model is an effective paradigm that allows for the utilization of cases’ specific knowledge previously experienced, concrete problem situations or specific patient cases for solving new cases. This study therefore aims to leverage the very rich database of cases of COVID-19 to solve new cases. The approach adopted in this study employs the use of an improved CBR model for state-of-the-art reasoning task in classification of suspected cases of Covid19. The CBR model leverages on a novel feature selection and semantic-based mathematical model proposed in this study for case similarity computation. An initial population of the archive was achieved with 68 cases obtained from the Italian Society of Medical and Interventional Radiology (SIRM) repository. Results obtained revealed that the proposed approach in this study successfully classified suspected cases into their categories at an accuracy of 97.10%. The study found that the proposed model can support physicians to easily diagnose suspected cases of Covid19 base on their medical records without subjecting the specimen to laboratory test. As a result, there will be a global minimization of contagion rate occasioned by slow testing and as well reduce false positive rates of diagnosed cases as observed in some parts of the globe.

Considering that emotional events diversify as one ages, this study formulates the Salient Episodic Memory Aggregation Hypothesis, which claims that aging induces homogenization of episodic memory and consequently increases the salience of emotional episodes. To test this hypothesis, the study focused on sadness episodic memory and conducted a web-based survey and a combined analysis consisting of natural language processing, machine learning, and network graph analysis. A sample of 2,954 adults aged between their 20s and over 70s participated in this study. They were asked to describe a sad event they had experienced and assess the psychological properties of the recalled episodes. After isolating and lemmatizing episodic words using natural language processing, vocabulary frequency was counted for each generation, and network graph analysis based on machine learning was performed to compare the structures of sadness episodes between generations. As a result, there were mainly two types of episodic words for which frequencies either declined or increased with age. The network structures of episodic words for the older generations possessed higher proximity (shortest path length) to higher concentrations of episodic words. These findings support the current hypothesis, indicating that the nature of sadness episodes differ between generations, and that older people have more aggregated episodic memory structures.

Online food delivery services are rapidly growing in popularity, making customer satisfaction critical for company success in a competitive market. Accurate delivery time predictions are key to ensuring high customer satisfaction. While various methods for travel time estimation exist, effective data analysis and processing are often overlooked. This paper addresses this gap by leveraging spatial data analysis and preprocessing techniques to enhance the data quality used in Bayesian models for predicting food delivery times. We utilized the OSRM API to generate routes that accurately reflect real-world conditions. Next, we visualized these routes using various techniques to identify and examine suspicious results. Our analysis of route distribution identified two groups of outliers, leading us to establish an appropriate boundary for maximum route distance to be used in future Bayesian modelling. The spatial analysis revealed that these outliers were primarily deliveries to the outskirts or beyond the city limits. By refining the data quality through these methods, we aim to improve the accuracy of delivery time predictions, ultimately enhancing customer satisfaction.

We propose that the short−term memory (STM), when processing a sentence, uses two uncorrelated processing units in series. The clues for conjecturing this model emerge from studying many novels of the Italian and English Literatures. This simple model, referring to the surface of language, seems to describe mathematically the input-output characteristics of a complex mental process involved in a reading/writing a sentence. We show that there are no significant mathematical/statistical differences between the two literary corpora by considering deep-language variables and linguistic communication channels, therefore, the surface mathematical structure of alphabetical languages is very deeply rooted in human mind, independently of the language used. The first processing unit is linked to the number of words between two contiguous interpunctions, variable Ip, approximately ranging in Miller’s 7±2 range; the second unit is linked to the number of Ip’s contained in a sentence, variable MF, ranging approximately from 1 to 6. The overall capacity required to process fully of a sentence ranges from 8.3 to 61.23 words, values that can be converted into time by assuming a reading speed, giving the range 2.64~19.54 seconds for fast-reading and 5.3~30.1 seconds for average reader. Since a sentence conveys meaning, the surface features we have found might be the starting point to arrive at an Information Theory that includes meaning.

Maternal obesity and gestational diabetes mellitus (GDM) are linked with impaired placental function and early onset of non-communicable cardiometabolic diseases in offspring. Previous studies have highlighted that the dietary non-esterified fatty acids (NEFAs), palmitate (PA) and oleate (OA), key dietary metabolites associated with maternal obesity and GDM, are potential modulators of placental lipid processing. Using the BeWo cell line model, the current study integrated transcriptomic (mRNA microarray), metabolomic, and lipidomic readouts to characterize the underlying impacts of exogenous PA and OA on placental villous trophoblast cell metabolism. Targeted gas chromatography and thin layer chromatography highlighted that saturated and monounsaturated NEFAs differentially impact BeWo cell lipid profiles. Furthermore, cellular lipid profiles differed when exposed to single and multiple NEFA species. Additional multi-omic analyses suggested that PA exposure is associated with enrichment in β-oxidation pathways, while OA exposure is associated with enrichment in anti-inflammatory and antioxidant pathways. Overall, this study further demonstrated that dietary PA and OA are important regulators of placental lipid metabolism. Encouraging appropriate dietary advise and implementing dietary interventions that maintain appropriate placental function by limiting excessive exposure to saturated NEFAs such as PA, will continue to be crucial in the clinical management of at-risk obese and GDM pregnancies.

These years have witnessed growing research on applying rheology in grinding and flotation treatment of finely disseminated ores. The slurry rheology has long been identified as the comprehensive effect of inter-particle interactions, including their aggregation (coagulation and flocculation) and dispersion states in slurry, which are more impactive under the fine-particle effect. In this regard, rheology has the potential to play a significant role in interpreting the flowing and deforming phenomenon of inter-particle aggregates, particle-bubble aggregates, and flotation froth. Though much attention has been paid to the rheological effect in industrial suspension, this has not been the case for mineral grinding and flotation for fine particles. The influential mechanism of rheology on the sub-processes of mineral processing has not been systemically concluded and revealed thoroughly, without which the underpinning mechanism for enhancing the processing efficiency has been difficult to discover. This paper reviews the current application and importance of rheology in the fine mineral processing, and the potential research direction in the field is proposed.

Robot Operating System 2 (ROS 2) is a robotic software that uses a set of Quality of Service (QoS) policies to manage the quality of robot data transmissions in a network, such as the RELIABLE and KEEP_LAST options. In ROS 2 node communication, the RELIABLE connection guarantees that all message data can be properly sent from the publisher to the subscriber. However, strict reliability is not guaranteed if the RELIABLE connection uses the KEEP_LAST option to transmit the robot data in the publish-subscribe communication. This study aims to analyze the efficiency of local cache, cache control, and QoS balancing optimization to improve ROS 2 node communication when using the RELIABLE and KEEP_LAST options to transmit multi-robot data in Aggregated Robot Processing (ARP) architecture. Our idea in local cache and cache control is to streamline the sensor data output before processing it when the sensor device produces the data with the same value in a row. Furthermore, QoS balancing optimization aims to balance the DEPTH and DEADLINE QoS configuration to determine the rates and buffer size in ROS 2 node communication. This study shows that combining local cache and QoS balancing optimization improves multi-robot data transmission and cooperation in ARP architecture.

How language mediates emotional perception and experience is poorly understood. The present event-related potential (ERP) study examined the explicit and implicit processing of emotional speech to differentiate the relative influences of communication channel, emotion category and task type in the prosodic salience effect. Thirty participants (15 women) were presented with spoken words denoting happiness, sadness and neutrality in either the prosodic or semantic channel. They were asked to judge the emotional content (explicit task) and speakers’ gender (implicit task) of the stimuli. Results indicated that emotional prosody (relative to semantics) triggered larger N100 and P200 amplitudes with greater delta, theta and alpha inter-trial phase coherence (ITPC) values in the corresponding early time windows, and continued to produce larger LPC amplitudes and faster responses during late stages of higher-order cognitive processing. The relative salience of prosodic and semantics was modulated by emotion and task, though such modulatory effects varied across different processing stages. The prosodic salience effect was reduced for sadness processing and in the implicit task during early auditory processing and decision-making but reduced for happiness processing in the explicit task during conscious emotion processing. Additionally, across-trial synchronization of delta, theta and alpha bands predicted the ERP components with higher ITPC values significantly associated with stronger N100, P200 and LPC enhancement. These findings reveal the neurocognitive dynamics of emotional speech processing with prosodic salience tied to stage-dependent emotion- and task-specific effects, which can reveal insights to research reconciling language and emotion processing from cross-linguistic/cultural and clinical perspectives.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike protein binds to the cell receptor angiotensin-converting enzyme-2 (ACE2) as the first step in viral cell entry. SARS-CoV-2 spike protein expression in ACE2-expressing cell surface induces cell–cell membrane fusion, thus forming syncytia. To exert its fusiogenic activity, the spike protein is typically processed at a specific site (S1/S2 site) by cellular proteases such as furin. The C488 residue, located at the spike–ACE2 interacting surface, is critical for the fusiogenic and infectious roles of the SARS-CoV-2 spike protein. We further demonstrated that the C488 residue of spike protein is involved in subcellular targeting and S1/S2 processing. C488 mutant spike localization to the Golgi apparatus and cell surface were impaired. Consequently, the S1/S2 processing of the spike protein, probed by anti-Ser-686-cleaved spike antibody, markedly decreased in C488 mutant spike proteins. Moreover, brefeldin A-mediated endoplasmic reticulum-to-Golgi traffic suppression also suppressed spike protein S1/S2 processing. As brefeldin A treatment and C488 mutation inhibited S1/S2 processing and syncytia formation, the C488 residue of spike protein is required for functional spike protein processing.

Apoptosis is associated with numerous phenotypical characteristics, and is thus studied with many tools. In this study, we compared two broadly used apoptotic assays: TUNEL and staining with an antibody targeting the activated form of an effector caspase. To compare them, we developed a protocol based on commonly used tools such as filters, zprojection and thresholding. Even though it is commonly used in imageprocessing protocols, thresholding remains a recurring problem. Here we analyzed the impact of processing parameters and readout choice on the accuracy of apoptotic signal quantification. Our results show that TUNEL is quite robust, even if image processing parameters can allow or not to detect subtle differences of the apoptotic rate. On the contrary, images from anticleaved caspase staining are more sensitive to handle and proved to necessitate to be processed more carefully. We then developed an open source Fiji macro automatizing most steps of the image processing and quantification protocol. It is noteworthy that the field of application of this macro is wider than apoptosis as it can perfectly be used to treat and quantify other kind of images.

Machine learning (ML) has a large capacity to learn and analyze a large volume of data. This study aimed to train different algorithms to discriminate between healthy and pathologic corneal images by evaluating digitally processed spectral-domain optical coherence tomography (SD-OCT) corneal images. A set of 22 SD-OCT images belonging to a random set of corneal pathologies was compared to 71 healthy corneas (control group). A binary classification method was applied; three approaches of ML were used. Once all images were analyzed, representative areas from every digital image were also processed and analyzed for a statistical feature comparison between healthy and pathologic corneas. The best performance was obtained from transfer learning - support vector machine (TL-SVM) (AUROC = 0.94, SPE 88%, SEN 100%) and transfer learning – random forest (TL- RF) method (AUROC = 0.92, SPE 84%, SEN 100%), followed by convolutional neural network (CNN) (AUROC = 0.84, SPE 77%, SEN 91%) and random forest (AUROC = 0.77, SPE 60%, SEN 95%). The highest diagnostic accuracy in classifying corneal images was achieved with the TL-SVM and the TL-RF models. In image classification, CNN was a strong predictor. This pilot experimental study developed a systematic mechanized system to discern pathologic from healthy corneas.

There always exist steel cuttings, holes and cracks at the interfaces in the explosive composite plate. Multi-pass friction stir processing (M-FSP) is proposed in this research to optimize the interface microstructure and the interface connection for 1060Al/Q235 explosive composite plate. Results show that the microstructures of 1060Al after M-FSP are fine and uniform owing to the strong stirring effect and recrystallization. Micro-defects formed by the explosive welding can be repaired by the M-FSP. However, M-FSP can also form tunnel defects in the aluminum, especially when the passes are one and two. The melting block and the melting lump in the composite plates are easy to become source of crack. The shear strengths and the bending properties for the 1060Al/Q235 explosive composite plate after M-FSP are the best when the passes are three, with the tool rotation speed of 1200rpm and the forward speed of 60mm/min. The optimized interfaces for the explosive composite plate after M-FSP are mainly by the metallurgical bondings, with a certain thickness and are discontinuous. Therefore, the crack extension stress is the largest and the mechanical properties are the best.

Current theories of autoimmunity are diverse, sometimes contradictory, and suffer from incompleteness. Although substantial evidence exists that adaptive and innate immunity, sex, genetic predisposition, and the microbiome all play essential roles in autoimmune disease etiologies and pathogenesis, and that antigen processing is altered during disease induction, no existing theory integrates all of these factors through a single, coherent mechanism. In an attempt to focus the field on the need to elucidate such an integrative mechanism, I propose one possibility here that, if nothing else, helps to identify the nature of the problems that need to be addressed. My theory is that autoimmune diseases are induced by normal immunological responses to unique pairs of complementary antigens, at least one of which is a molecular mimic of a host target. Each antigen in the complementary pair induces a complementary immune response (T or B cell); although each immune response is idiotypic in origin, the antigenic complementarity results in what appears to be an idiotype-anti-idiotype relationship between the responses. Additionally, because of the antigenic complementarity, each immune response mimics one of antigens, abrogating the distinction between self and non-self. If at least one of the antigens mimics a host antigen, then the resulting immunological civil war spreads to a host tissue. Complementary antigens also alter antigen processing so that antigens that would normally be proteolytically digested are presented by the major histocompatibility complex (MHC) to T and B cell receptors inducing a cross-reactive immune response. The resulting civil war is supported by the innate immune system due to the complementarity of the initiating antigens.. Complementary antigens stimulate synergistic toll-like receptors (TLR) and/or nucleotide-binding oligomerization receptors (NOD) resulting in up-regulation of cytokine production and further stimulation of the adaptive immune response. Because the immune responses (e.g., antibodies) mimic the initiating antigens, this synergistic activation of innate immunity becomes chronic. Additionally, TLR and NOD function are highly sensitive to sex hormones, some becoming up-regulated and some down-regulated in the presence of either testosterone or estrogens. This sensitivity explains how sex modifies susceptibility to autoimmune diseases. Genetic mutations in TLR, NOD and MHC further alter antigen presentation and the degree to which antigens stimulate an immune response explaining how genetics also modifies susceptibility. Finally, sex hormones also alter the host microbiome, which in turn modulates autoimmune disease risk by shaping the immunological nature of self and by mediating susceptibility to microbial infection. Moreover, it appears that the microbiome camouflages itself from the immune system by mimicking the host antigenic repertoire; the mimicry between the antigens of the microbiome and the host results in selective attacks on microbiome constituents concomitant with any autoimmune attack on host tissues. This antigenic complementarity theory thereby integrates all major elements known to affect, or be affected by, autoimmune diseases and provides a set of testable implications.

Friction stir processing (FSP), a severe plastic deformation process, was applied on commercially pure Ti to obtain an improved microstructure. The process yielded a refined microstructure and higher mechanical properties at room temperature (RT). Yet the microstructure was found to contain bright bands demonstrating high hardness values of about 500 HV. High resolution scanning electron microscopy (HRSEM) as well as electron back scattering diffraction (EBSD) analysis indicated that these bands were composed of extra-fine equiaxed α-Ti grains with an average radius of 1-2 microns. In addition, a retained β-phase was detected at the boundaries of these α-Ti grains, together with a small quantity of separate β grains. The results of a fractography study conducted on broken tensile specimens showed that the FSP’ed material was free of defects and that the fracture started at these bands. It is proposed that these bright bands are due to excessive deformation occurring during the processing stage, leading to an accelerated dynamic recrystallization (DRX) process. In turn, these heavy deformation regions act as a strengthening constituent, making the material superior to the parent material as far as its mechanical RT properties are concerned. Consequently, this means that FSP of CP-Ti has the potential to serve as an industrial means of improving the mechanical properties of the material.

The three-phase separator was perforated after four years’ service. The perforation position is at the bottom of the vessel under the baffle plate in an oil transfer station. The cause of perforation was investigated by chemical analysis using a direct-reading spectrometer, microstructure examined by optical microscope(OM), and lab simulated corrosion experiments by electrochemical workstation, and the corrosion products examined with scanning electron microscopy(SEM), energy dispersive spectrometer(EDS) in this paper. The analyses indicated that the coating at the base of the pressure vessel failed and this led to the direct exposure of the carbon steel plate to the corrosive medium. The electrical contact between the carbon steel and the stainless steel, sets up a galvanic cell that accelerated the corrosion of the pressure vessel which eventually led leads to the perforation.

The objective of this research was to study the drying kinetics of passion fruit seeds, which are a byproduct of the industrial processing of passion fruit, with the potential to produce byproducts such as oil and flour. After drying, the seeds were directed for cold-press oil extraction, and the quantification of fatty acids was performed. Following the oil extraction, the residues underwent a grinding process to produce flour, which was characterized in terms of its nutritional aspects. The drying process was conducted using an experimental forced convection dryer with controlled temperatures of 40, 50, 60, and 70 °C, and a drying air velocity of 1.5 m s-1. This work introduced a novel approach using mathematical models, all derived from Fick's equation. For each model, the activation energy and thermodynamic properties related to the drying procedure were determined. Fatty acids in the oils and physicochemical characteristics of the defatted residue's flour were also analyzed. The Cavalcanti Mata, Henderson & Pabis, and Page models modified by Cavalcanti Mata were found to best fit the experimental data. The highest proportions of unsaturated fatty acids in passion fruit oil were linoleic acid (Omega-6) at 68.8% and oleic acid (Omega-9) at 16.1%. The predominant saturated fatty acid was palmitic acid at 10.61%, with no significant differences observed in relation to the drying temperatures. It can be concluded that the composition of the flour from the residue of passion fruit grain oil extraction varies in terms of crude fiber content, ranging from 56.36% to 58.8%, and protein content, ranging from 15.6% to 18.26%, with significant differences observed concerning the drying temperatures. The lipid content varied from 13.5% to 13.76%, with no significant differences observed across the evaluated drying temperature variations.

Improving the quality of petroleum products and refining processes through the use of artificial intelligence and machine learning techniques is the topic of this article. It shows that expert knowledge and conventional empirical models can't get you where you want to go in a refining process. To effectively capture complex interactions and forecast fuel qualities, machine learning techniques such as principal component analysis (PCA), support vector machines (SVM), artificial neural networks (ANN), and partial least squares (PLS) are suggested. Gasoline and other petroleum products, as well as property prediction, process control, product quality, and operational efficiency in refineries, can all be improved with the help of machine learning applied to spectral or distillation curve data. An exciting new direction in optimizing operations, meeting environmental norms, and precisely estimating gasoline quality is offered by advanced machine learning algorithms.

Polygonatum cyrtonema Hua. is an important medicinal and edible food in China and the traditional processing method of nine-steaming and nine-drying has been used to process its rhizome. However, the global dynamic changes in secondary metabolites during the processing and whether this method could enhance the accumulation of functional components remain unclear. This study aimed to explore the processing-induced mechanisms involved in the accumulation of secondary metabolites and provide theoretical support for the pharmacological study on P. cyrtonema. Results showed the first 6 processing cycles induced drastic changes in the accumulation of secondary metabolites, while the last 3 did not induce further changes. The accumulation of most secondary metabolites significantly increased after the first 3 cycles and stabilized after 6 cycles. The first 3 cycles led to numerous newly added metabolites while the last 6–9 cycles led to a small number of disappeared metabolites. Processing enhanced the biosynthesis of various secondary metabolites and significantly affected the metabolisms of amino acids. Together, a short period of processing was helpful for enhancing the biosynthesis of secondary metabolites. However, the enhancing effects will be reversed or weakened under continuous processing. The processing cycles should be reduced to 3–6 to maintain the enhancing effects.

The article discusses the main technologies for processing titanium-containing raw materials, and the advantages and disadvantages of various technological solutions. The analysis of the literature review showed that the traditional schemes for the production of titanium products are mainly focused on the use of ilmenite concentrates. In connection with the depletion of ilmenite deposits, in the near future there will inevitably be a need to switch to the use of complex ores - titanomagnetites. The obtaining of titanium dioxide from titanomagnetite raw materials with a high content of impurity components requires an individual approach for each specific deposit. It is proposed to consider the possibilities of further improvement of the development of a technological process for low-temperature (1000-1200 oC) processing of titanomagnetite concentrates with the production of pure titanium dioxide.

Estimating age at death is essential to establish a biological profile from human skeletal remains in both forensic and archeological settings. Imaging studies of skeletal age changes in adults have described metamorphosis of trabecular bone structure and bone loss in the proximal femur , as well as changes in morphology during different stages of life. This study aims to assess the utility of a digital representation of conventional X-ray films of the proximal femur for the estimation of age at death in a sample of 91 adult individuals (47 females and 44 males) of the Coimbra Identified Skeletal Collection. The proposed approach showed a root mean squared error (RMSE) of 17.32 years (and mean absolute error of 13.47 years) for females and an RMSE of 14.06 years (mean absolute error of 11.08 years) for males. The main advantage of this approach is the consistency in the feature detection and extraction, as X-ray images projected on the femora space will always produce the same set features to be analyzed for age estimation while more traditional methods rely heavily on operator experience which can lead to inconsistent age estimates among experts.

The technical capabilities of modern Industry 4.0 and Industry 5.0 are rather vast and growing exponentially daily. The present-day Industrial Internet of Things (IIoT) combines manifold underlying technologies that require real-time interconnections and communications among heterogeneous devices. Smart cities are established with sophisticated designs and control for seamless Machine-to-Machine (M2M) communication to optimize resources, costs, performances, and energy distribution. All the sensory devices within a building interact to maintain a sustainable climate for residents and intuitively optimize the energy distribution to optimize energy production. However, it encompasses quite a few challenges for devices that lack compatible and interoperable designs. Conventional solutions are restricted to limited domains or rely on engineers to design and deploy translators for each pair of ontologies. This is a costly process in terms of engineering efforts and computational resources. The issue persists that a new device with a different ontology must be integrated into an existing IoT network. We propose a self-learning model that can determine the taxonomy of devices given their ontology meta-data and structural information. The model finds matches between two distinct ontologies using the Natural Language Processing (NLP) approach for learning linguistic contexts. Then, by visualizing the ontology network as a knowledge graph, it is possible to learn the structure of the meta-data and understand the device's message formulation. Finally, it can align entities of both ontology graphs similar in context and structure. Furthermore, the model performs dynamic M2M translation without requiring extra engineering or hardware efforts.

The utilization of tempered blast furnace (BF) slag through the direct fiber forming process to create high-value thermal insulation materials offers a dual benefit: it efficiently harnesses the latent heat within unused slag and substantially enhances the value of blast-furnace slag utilization. However, gauging the melting properties of iron slag under high temperatures is a challenge. In this study, we explore the melting behavior of SiO2 within a high-temperature molten pool. We employ dynamic visual data (video stream) captured via a non-contact charge coupled device (CCD) video recording system to extract SiO2 contours through image processing. The change in image centroid characteristics is used to establish a convolution function relationship, and MATLAB's traversal search algorithm determines SiO2's centroid position. Given that SiO2 is proportionate to crucible pixels, the area of SiO2 is calculated through pixel statistics within these contours. Subsequently, we propose a new indirect method to process image information, yielding SiO2 volume and mass at different time points. An exponential fitting yields the melting rate function of SiO2. Finally, we compare this indirect method with shape from shading (SFS), quantitative characterization, and dimensional analysis techniques. We also discuss the strengths and limitations of each method. Our findings reveal that the indirect solution method presented here boasts straightforward calculation steps and imposes minimal image format requirements. This research provides theoretical and technical support for blast-furnace slag's direct fiber forming process.

Surfaces of additively manufactured metal parts from powder-based processes typically show powder particle agglomerations and other features, resulting in high surface roughness. Proper characterization of those surfaces is necessary in order to assess part quality with respect to coatability, mechanical performance or corrosion resistance for use in aerospace, automotive, medical and more industrial applications. Optical surface texture measurement allows for collection of areal surface data, while the established contact stylus method only captures line profile data. When applying optical methods for surface topography measurements, proper data acquisition and post-processing in order to assess surface texture may be complex. A number of variables can be adjusted, such as different measurement settings, approaches to outlier removal, evaluated area size or form removal. This work shows the influence of selected z-range prior to measurement and the influence of choosing pre-defined outlier removal settings in MountainsMap 9.2 on selected ISO 25178-2:2022 parameters calculated from data obtained from confocal microscopy for as-built Ti6Al4V from laser powder bed fusion. The aim is to show the influence of variation in measurement and post-processing on calculated surface texture parameters and stress the importance of proper documentation in order to achieve reproducibility of data for quality management.

Cardiac monitoring based on wearable photoplethysmography (PPG) is widespread because of its usability and low cost. Unfortunately, PPG is negatively affected by various types of disruptions, which could introduce errors to the algorithm that extracts Pulse Rate Variability (PRV). This study aims to identify the nature of such artifacts caused by various types of factors under the conditions of precisely planned experiments. We also propose methods for their reduction based solely on the PPG signal while preserving the frequency content of PRV. The accuracy of PRV derived from PPG was compared to Heart Rate Variability (HRV) derived from the accompanying recorded ECG. The results indicate that filtering PPG signals using the Discrete Wavelet Transform and its inverse (DWT/IDWT) is suitable for removing slow components and high-frequency noise. Moreover, the main benefit of amplitude demodulation is better preparation of the PPG to determine the duration of pulse cycles and reduce the impact of some other artifacts. Postprocessing applied to HRV and PRV indicates that the correction of outliers based on local statistical measures of signals and the AR model is only important when PPG is of low-quality and has no effect under good signal quality. The main conclusion is that DWT/IDWT, followed by amplitude demodulation, enables the proper preparation of the PPG signal for the subsequent use of PRV extraction algorithms. However, postprocessing in the proposed form should be applied more in the situations of observed strong artifacts than in motionless laboratory experiments.

This paper investigates if Corporate Social Responsibility (CSR) reports published by a selected group of Nordic companies are aligned with the Global Reporting Initiative (GRI) standards. To achieve this goal, several natural language processing, and text mining techniques were implemented and tested. We extracted strings, corpus, and hybrid semantic similarities from the reports and evaluated the models through the intrinsic assessment methodology. A quantitative ranking score based on index matching was developed to complement the semantic valuation. The final results show that Latent Semantic Analysis (LSA) and Global Vectors for Word Representation (GloVE) are the best methods for our study. Our findings will open the door to the automatic evaluation of sustainability reports which could have a strong impact on the environment.

Proteolytic processing of amyloid precursor protein (APP) plays a critical role in pathogenesis of Azheimer’s disease (AD). Sequential cleavage of APP by β and γ secretases leads to generation of Aβ40 (non-amyloidogenic) and Aβ42 (amyloidogenic) peptides. Presenilin-1 (PS1) or presenilin-2 (PS2) pay a role of catalytic subunit of γ-secretase. Multiple familial AD (FAD) mutations in APP, PS1, or PS2 result in increased Aβ42:Aβ40 ratio and accumulation of toxic Aβ42 oligomers and plaques in patient brains. In this study we performed molecular modeling of APP complex with γ-secretase and analyzed potential effects of FAD mutations in APP and PS1. We noticed that all FAD mutations in APP transmembrane domain are predicted to cause an increase in the local disorder of its secondary structure. Based on structural analysis of known γ-secretase structures we proposed that APP can form a complex with γ-secretase in 2 potential conformations – M1 and M2. In conformation M1 transmembrane domain of APP forms a contact with perimembrane domain that follows the transmembrane domain 6 (TM6) in PS1 structure. In conformation M2 transmembrane domain of APP forms a contact with transmembrane domain 7 (TM7) in PS1 structure. By analyzing effects of PS1-FAD mutations on local protein disorder index, we discovered that these mutations increase conformational flexibility of M2 and reduce conformational flexibility of M1. Based on these results we proposed that M2 conformation, but not M1 conformation, of γ secretase complex with APP leads to amyloidogenic (Aβ42-generating) processing of APP. Our model predicts that APP processing in M1 conformation is favored by a curved membranes, such as membranes of early endosomes. In contrast, APP processing in M2 conformation is likely to be favored by a relatively flat memranes such as membranes of late endosomes and plasma membrane. These predictions are consistent with published biochemical analysis of APP processing at different subcellular locations. Our results suggest that specific inhibitors of Aβ42 production could be potentially developed by selectively targeting M2 conformation of γ secretase complex with APP.

Wildfires generate large amounts of atmospheric pollutants yearly. The development of an emissions inventory for this activity is a challenge today, mainly to perform modeling of air quality. There are free available databases with historical information about this source. The main goal of this study was to process the results of biomass burning emissions for the year 2014 from the Global Fire Assimilation System (GFAS). The pollutants studied were the black carbon, the organic carbon, fine and coarse particulate matter, respectively. The inputs were pre-formatted to enter to the simulation software of the emission inventory. In this case, the Sparse Matrix Operator Kernel Emissions (SMOKE) was used and the values obtained in various cities were analyzed. As a result, the spatial distribution of the forest fire emissions in the Southern Hemisphere was achieved, with the polar stereographic projection. The highest emissions were located in the African continent, followed by the northern region of Australia. Future air quality modeling at a local level could apply the results and the methodology of this study. The biomass burning emissions could add a better performance of the results and more knowledge on the effect of this source.

The analysis of methods of cleaning and processing of saponite-bearing technogenic waters of diamond mining enterprises of the Arkhangelsk region is carried out. The perspective of the electrochemical separation method for extracting saponite from man-caused waters, providing a targeted change in its structural-texture, physico-chemical and mechanical properties, is shown. The possible directions of realization of saponite and products of its modification in various branches of industry are considered.

The diameter of a H13 steel tool with M6 threads and a pin diameter of 5.9 mm and a pin length of 5 mm was measured after each 25.4 mm length of friction stir processing (FSP) of 6061-T6 extrusions. The change in pin diameter with FSP time or distance did not exhibit any steady state and was found to have two distinct regions. Metallographic analysis of two tools subjected to FSP for 60 and 120 seconds showed that (i) threads fractured in early stages of FSP, (ii) a built-up layer formed between the threads, and (iii) threads progressively wore with processing time. The metallographic analysis of an embedded tool showed the presence of a fractured piece of the tool in the stir zone. These points are discussed in detail in the paper.

The application of 3D LiDAR technology has become increasingly extensive in tunnel monitoring due to the large density and high accuracy of the acquired spatial data. The proposed processing method aims at circle tunnels and provides a clear workflow to automatically process raw point data and easily interpretable results to analyze tunnel health state. The proposed automatic processing method employs a series of algorithms to extract point cloud of a single tunnel segment without obvious noise from entire raw tunnel point cloud mainly by three steps: axis acquisition, segments extraction and denoising. Tunnel axis is extracted by fitting boundaries of the tunnel point cloud rejection in plane with RANSAC algorithm. With guidance of axis, the entire preprocessed tunnel point cloud is segmented by equal division to get a section of tunnel point cloud which corresponds to a single tunnel segment. Then the noise in every single point cloud segment is removed by clustering algorithm twice, based on distance and intensity. Finally, clean point clouds of tunnel segments are processed by effective deformation extraction processor to get ovality and three-dimensional deformation nephogram.

At present, medical institutes generally use EMR to record patient's condition, including diagnostic information, procedures performed and treatment results. EMR has been recognized as a valuable resource for large scale analysis. However, EMR has the characteristics of diversity, incompleteness, redundancy and privacy, which make it difficult to carry out data mining and analysis directly. Therefore, it is necessary to preprocess the source data in order to improve data quality and improve the data mining results. Different types of data require different processing technologies. Most structured data commonly needs classic preprocessing technologies, including data cleansing, data integration, data transformation and data reduction. For semi-structured or unstructured data, such as medical text, containing more health information, it requires more complex and challenging processing methods. The task of information extraction for medical texts mainly includes NER (Named Entity Recognition) and RE (Relation Extraction). In this paper, we introduce the process of EMR processing, including data collection, data preprocessing, data mining, evaluation and knowledge application, analyze the current status of the key technologies, such as data preprocessing and data mining, and provide an overview of the application domains and prospects of EMR mining technologies. Finally, we summarize the existing problems in the research of EMR mining, and review the development trends.

The results of electron-beam processing of Mn-Zn ferrite samples using pulsed and continuous electron beams in the forevacuum pressure range (10 Pa) are presented. We find that continuous electron-beam processing leads to surface structuring of the ferrite, changes in elemental composition on the surface, and electrical property modification. The degree of ferrite parameter changes exhibits a threshold behavior. For surface processing temperatures below 900 °C, changes are barely noticeable, while for temperatures over 1100 °C the surface resistance decreases by more than an order of magnitude. Electron-beam processing with millisecond pulse duration and pulse energy density exceeding 15 J/cm² results in the formation of low zinc content melt islands, while the remaining surface area (outside the islands) elemental content and ferrite properties remain largely unchanged. The thickness of the modified layer depends on the processing mode and can be controlled over the range 0.1–0.5 mm. Because of its low resistance, the modified layer can be utilized to enhance the RF-absorbing properties of the ferrite.

Malnutrition is one of major factors of bone and cartilage disorders. Pacific cod (Gadus macrocephalus) processing waste is a cheap and highly promising source of bioactive substances, including collagen-derived peptides and amino acids, for bone and cartilage structure stabilization. Addition of these substances to a functional drink is one of the ways to achieve their fast intestinal absorption. Collagen hydrolysate was obtained via enzymatic hydrolysis, ultrafiltration, freeze-drying, and grinding to powder. The lyophilized hydrolysate was a light gray powder with high protein content (>90%), including collagen (about 85% of total protein) and a complete set of essential and non-essential amino acids. The hydrolysate was applicable as a protein food supply or a structure-forming food component due to presence of collagen fiber fragments. An isotonic fitness drink (osmolality 298.1 ± 2.1 mOsm/L) containing the hydrolysate and vitamin C as a cofactor in collagen biosynthesis was prepared. Addition of the hydrolysate did not adversely affect its organoleptic parameters. Production of such functional foods and drinks is one of the beneficial ways of fish processing waste utilization.

Objective tools to track medication adherence are lacking. A tool to monitor pill intake that can be implemented in mHealth apps without the need for additional devices was developed. We propose a pill intake detection tool that uses digital image processing to analyze images of a blister to detect the presence of pills. The tool uses the circular Hough transform as a feature extraction technique and is therefore primarily useful for the detection of pills with a round shape. This pill detection tool is composed of two steps. First, the registration of a full blister and storing of reference values in a local database. Second, the detection and classification of taken and remaining pills in similar blisters, to determine the actual number of untaken pills. In the registration of round pills in full blisters, 100% of pills in gray blisters or blisters with a transparent cover were successfully detected. In counting of untaken pills in partially opened blisters, 95.2% of remaining and 95.1% of taken pills were detected in gray blisters, while 88.2% of remaining and 80.8% of taken pills were detected in blisters with a transparent cover. The proposed tool provides promising results for the detection of round pills. However, the classification of taken and remaining pills need to be further improved, in particular for the detection of pills with non-oval shapes.

Mitochondria play key roles in cellular energy metabolism in eukaryotes. Mitochondria of most organisms contain their own genome and specific transcription and translation machineries. The expression of angiosperm mtDNA involves extensive RNA-processing steps, such as RNA trimming, editing, and the splicing of numerous group II-type introns. Pentatricopeptide repeat (PPR) proteins are key players of plant organelle gene expression and RNA metabolism. In the present analysis, we reveal the function of the MITOCHONDRIAL SPLICING FACTOR 2 gene (MISF2, AT3G22670) and show that it encodes a mitochondria-localized PPR protein that is crucial for early embryo-development in Arabidopsis. Molecular characterization of embryo-rescued misf2 plantlets indicates that the splicing of nad2 intron 1 and thus respiratory complex I biogenesis are strongly compromised. Moreover, the molecular function seems conserved between MISF2 protein in Arabidopsis and its orthologous gene (EMP10) in maize, suggesting that the ancestor of MISF2/EMP10 was recruited to function in nad2 processing before the monocot-dicot divergence, ~200 million years ago. These data provide new insights into the function of nuclear-encoded factors in mitochondrial gene expression and respiratory chain biogenesis during plant embryo development.

Hot deformation at elevated temperature is essential to densify the particle reinforced Aluminum matrix composites (AMCs) and improve their performance. However, hot deformation behavior of the AMCs is sensitive to the variation of hot processing parameters. In this paper, optimal processing parameters of the dual-scale SiCp/A356 composites was determined to explore the control strategy of the microstructure. Hot compression tests were conducted at the temperature ranging from 460 to 520℃ under strain rates from 0.01 to 5 s−1. Constitutive equation and processing maps were presented to determine the hot processing parameters. Microstructure evolution of the dual-scale SiCp/A356 composites was analyzed. The strain rate of 0.62 ~ 5s-1 and deformation temperature of 495 ~ 518℃ is suitable for the hot processing. The number of DRX grains in the “safe” domains is larger and the dislocation density is lower compared to those of instability domains. DRX particles mainly occurred around SiC particles. The presence of SiC particles can promote effectively the DRX nucleation, which result in that the dynamic softening mechanism of the dual-scale SiCp/A356 composites is dominated DRX.

Statistical modeling lies at the heart of product design and development throughout numerous engineering disciplines, especially since processing large amounts of data has become increasingly ubiquitous. While mathematical statistics provide elegant guidance pertaining to the question of whether or not some particular underlying modeling assumptions are justified and appropriate, when pursuing a more comprehensive assessment of product design and development other considerations often increase in significance. Therefore, we will examine and analyze the tedious interactions and implications of statistical modeling choices and product liability exposure. To the best of our knowledge, this paper is the first to draw attention to and explore some often overlooked or oversimplified dangers and pitfalls that enter the equation when product design heavily relies on statistical modeling. In particular, through a diligent analysis of both statistical and legal aspects we will explore how statistically optimal procedures may yield far from optimal outcomes in terms of product liability when applied to actual real life problems and why suboptimal nonparametric or robust approaches may constitute better alternatives.

While the link between Sensory-processing sensitivity (SPS) and internalizing symptoms has been well-established, a link to externalizing problems is still to be explored. This study aimed to further examine the relation between SPS and behavioral problems by testing the potential mediating roles of trait emotional intelligence (TEI) and decision-making styles. Pathway analyses were conducted on data from 268 community sample participants (Mage= 25.81, SD=2.41, 61.2% females). Results indicated gender differences in the pathway level outcomes of SPS, as well as potential partial mediators in men and women. SPS both directly and via the mediating effects of well-being factor (TEI) and avoidant decision-making influenced depression, regardless of gender. Direct effects on aggression were, however, obtained only in the male sample. Indirect effects of SPS on aggression were found in spontaneous decision-making for men, and in self-control and sociability factors of TEI for women. Directions for future research were discussed. sensory-processing sensitivity, depression, aggression, emotional intelligence, decision-making style, gender differences

Different bacterial species have dramatically different generation times, from 20-30 minutes in Escherichia coli to about two weeks in Mycobacterium leprae. The translation machinery in a cell needs to synthesize all proteins for a new cell in each generation. The three subprocesses of translation, i.e., initiation, elongation, and termination, are expected to be under stronger selection pressure to optimize in short-generation bacteria (SGB) such as Vibrio natriegens than in the long-generation Mycobacterium leprae. The initiation efficiency depends on the start codon decoded by the initiation tRNA, the optimal Shine-Dalgarno (SD) decoded by the anti-SD (aSD) sequence on small subunit rRNA, and the secondary structure that may embed the initiation signals and prevent them from being decoded. The elongation efficiency depends on the tRNA pool and codon usage. The termination efficiency in bacteria depends mainly on the nature of the stop codon and the nucleotide immediately downstream of the stop codon. By contrasting SGB with long-generation bacteria (LGB), we predict that 1) SGB to have more ribosome RNA operons to produce ribosomes, and more tRNA genes for carrying amino acid to ribosomes, 2) SGB to have a higher percentage of genes using AUG as start codon and UAA as stop codon than LGB, 3) SGB to exhibit better codon and anticodon adaptation than LGB, and 4) SGB to have weaker secondary structure near translation initiation signals than LGB. These differences between SGB and LGB should be more pronounced in highly expressed genes than lowly expressed genes. We present empirical evidence in support of these predictions.

The persistence of Salmonella and Campylobacter in chicken meat is a considerable public health risk and a future challenge. This study aimed to determine the prevalence of Salmonella and Campyl-obacter in poultry processing lines where different chlorination techniques were used. The sam-ples were collected from four types of processing plants considering the chlorine concentration used in the chill tank, which ranged from 2 ppm to 50 ppm. Salmonella and Campylobacter were isolated from carcass washings, neck skin, and, caecal samples. Subsequently, an antimicrobial susceptibility test was performed for the isolates. The results revealed the overall prevalence of Salmonella and Campylobacter was 78.25%, and 64% respectively. Positive percentages of Salmonella and Campylobacter were high in carcasses compared to neck skin and caeca. Carcass Campylobacter counts at higher chlorine concentrations ranging from 20 – 50 ppm was significantly low (p

The present study aimed to characterize the microstructure of a temporary 3D printing resin (Resilab Temp), evaluating the optical properties and mechanical behavior according to different post-processing curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 x 10 x 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on the W3D printer (Wilcos), and light-cured in Anycubic Photon at different times (without curing, 16 minutes, 32 minutes, and 1 hour). For the structural characterization, analyses were carried out in FTIR (Fourier Transform Infrared Spectroscopy) and Scanning Electron Microscopy (SEM). The mechanical behavior of the resin was based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed with a spectrophotometer (VITA Easy Shade Advanced 4.0), which was evaluated following CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging with 2 thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all the analyses carried out in this study, for the evaluated material, the post-polymerization time of 1 hour can be suggested to improve the mechanical performance of 3D-printed devices.

Hang-ju was one of five officinal varieties of Flos chrysanthemum for its edible and potable usage. Besides Flos Chrysanthemum (FL), there were also Bud Chrysanthemum (BC) and Fetal Chrysanthemum (FC) at the early and late stage of buds, respectively, in the consumption market of Hang-ju with higher prices. Whether the quality and efficiency of BC and FC was superior to FL or merely consumption misunderstandings? Three commercial products of Hongxinju, a representive cultivar of Hang-ju were studied with a GC-MS based metabolomics approach, complemented with morphology, contents of moisture and protein and the anti-oxidant activity, to reveal the metabolic alterations of violate components in Hongxinju in different flowering stage and at different processing periods. It revealed that most of the violate components were increased from fresh FC to FL, and the low-boiling fractions, inflammatory methyl arachidonate and air-polluting component of ethylbenzene were declined while the representative components with pungent flavor and cool nature of a-curcumene and (Z,Z,Z)-9,12,15-octadecatrienoic acid, vision improving carotenol of rhodopin and high-boiling fractions were elevated after processed in final FL compared with that in BC and/or FC. Though the content of protein and anti-oxidative capacity of final BC and FC were nearly equal to those of FL, in comprehensive consideration of the representative components related with the efficiency in heat cooling and vision improving, as well as the representative components related with inflammation and air-pollution, final FL was recommended other than BC and FC in the practice of medicine with the yield and quality integrated into account.

The purpose of this study was to 1) examine the impact of various types of heat processing used by consumers (water bath cooking WBC, oven convection roasting OCR, grilling G, pan frying PF) on the selenium content and its retention in goose breast meat (with and without skin); 2) Estimation of coverage of this element's daily requirement in adults after consuming 100 g of goose breast meat. The material used in the study comprised 36 breast muscles cut from carcasses of 17-week-old White Koluda geese. The moisture, ash, and selenium were determined in both raw and thermally processed muscles. It has been concluded that various methods of heat processing significantly impact cooking loss, moisture, ash and selenium content of meat. The heat processing increased the selenium content of the muscle regardless of the presence of skin, which affects the possibility of covering adults' Nutrient Reference Values-Requirements (NRV-R) for this element in the range of 33.3-44.8%. Goose breast meat can be a valuable component of a diversified diet. It provides many nutrients. It is also a safe source of selenium. It is unlikely that adult consumers, even those who eat goose regularly, will exceed this element's upper tolerable intake level.

Bending of solid wood from European oak is one of the most demanding technological processes due to its specific structural and physical properties and variability. We investigated the influence of wood moisture content (MC) and stiffness, determined by NDT, as well as previous drying methods on the bending ability of the wood. The best quality was obtained with bending specimens bent at a moisture content of at least 16 % and quarter or semi-quartersawn. The number of rejected specimens increased slightly when HF bending was used. Single-stage predrying of oak to a final MC of 8 % resulted in a high rejection rate (> 70 %) regardless of drying technique. The acceptance rate was higher for less stiff specimens where the ratio of ultrasonic velocity in the straight (vS) and bent region (vB) was less than 0.5 (vB/vS).

This study presents the algorithm ACTION, defined as Automatic Center detection of Tropical cyclone (TC) using Image processing based on the Operational radar Network. Based on the high visibility of weather radar imagery, the TC’s motion vector is calculated from the continuous image change using optical flow, producing its rotation center as the TC’s center. The algorithm’s performance was verified for typhoons (TCs in the Northwestern Pacific) affecting the Korean Peninsula from 2018–2021 and showed a high detection rate of 80.8% within an error distance of 40 km compared to the best track of the Korea Meteorological Administration (KMA). The detection rate was 100% for typhoons with temporally consistent morphological characteristics. ACTION automatically generates TC center information upon the TC’s initial entry inside the observation radius even in the absence of uniform radar data. ACTION easily calculates using Open Source Computer Vision, performs in real time, and can be directly applied to rapidly generated weather radar images; hence, it is currently being utilized by the KMA. The high-temporal-resolution TC center information calculated through ACTION is expected to improve the efficiency of TC forecasting.

The spray drying process causes the buildup of an unspecified and unique pattern of wall deposits on the wall. The powder recovery of fruit juice by spray dryer is associated with stickiness problems because of the nature of food which contains low molecular weight sugars and organic acids, which have a low glass transition temperature (T_g). The surface properties of oxygen plasma treated-PTFE substrate were evaluated by using the different parameters of Plasma Enhanced Chemical Vapour Deposition (PECVD) prior to spray drying analysis. In this study, the fabrication method of nearly perfect superhydrophobic surfaces through plasma treatment with oxygen gas was generated and utilized. The plasma-treated PTFE were deposited from a fixed flow rate of oxygen gas with 30 cm³/min by varying the deposition time from 1 to 15 minutes to induce the hydrophobic surface of the PTFE substrate. The characterization techniques used to determine the morphology and chemical bonding of the substrate are field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The hydrophobicity of the glass samples was determined by the water droplet contact angle. Sample prepared at radio frequency (RF) power of 90W for 15 minutes duration of treatment time showed porous and spongy like microstructure which correlates with the best performance of a good contact angle which creates the superhydrophobicity regime (171^o). Surface morphology analysis using scanning electron microscopy (SEM) showed changes in its roughness in the surface-treated glass substrate. The success of this method produced a huge potential for solving most of the food processing issues which relate to biofouling (e.g., powder stickiness) that would otherwise struggle to improve high productivity and recovery.

Autophagy refers to the degradation of cytoplasmic constituents by a lysosomal-mediated pathway, which plays a critical role in maintaining cellular homeostasis. Importantly, dysregulation of autophagy has been implicated in multiple neurodegenerative disorders. Previous studies reported that autophagy affects the processing of amyloid precursor protein (APP), thus stimulating β‐amyloid (Aβ) production in Alzheimer’s disease (AD) eventually. Although the mechanism of autophagy modulation on APP processing and its pathogenesis has not yet been fully elucidated at the molecular level, but modulation of autophagy has received considerable attention as a promising approach for the treatment of AD. In the early stage of AD, Aβ may prompt autophagy to facilitate its removal via mTOR‐independent as well as-dependent pathways. However, a recent study proposed that autophagy processes are not properly regulated as AD continues to progress, and consequently, the production of Aβ tends to accumulate rapidly. Meanwhile, a number of autophagy-related genes (Atg) as well as APP genes are also thought to influence the development of AD, which may serve as a bi‐directional link to autophagy and AD pathology. In this review, we summarized current observations related to autophagy regulation and APP processing, focusing on their dynamic modifications associated with the progression of AD. Recent findings together highlight the essential role of autophagy in the removal and clearance of APP and Aβ deposition in the pathological condition of AD.

We show that combining vibrational spectroscopy with signal processing can result in a scheme for ultrasensitive detection of molecules. We consider the vibrational spectrum as a signal on the energy axis and apply a matched filter on that axis. On the example of a nerve agent molecule, we show that this allows detecting a molecule by its vibrational spectrum even when the recorded spectrum is completely buried in noise, when conventional spectroscopic detection is impossible. Detection is predicted to be possible with signal-to-noise ratios in recorded spectra as low as 0.1. We study the importance of spectral range used for detection as well as of the quality of the computed spectrum used to program the filter, specifically, the role of anharmonicity, of the exchange correlation functional, and of the basis set. The use of the full spectral range rather than of a narrow spectral window with key vibrations is shown to be advantageous, as well as accounting for anharmonicity.

Grading of rice grains has gain attentions due its requirement of quality assessment during import or export. Rice grain quality depends on milling operation, where rice hull is removed with a huller system followed by whitening operation. In such process, adjustment of rollers, control, and operation is important in terms of quality of milled rice. Especially, the basmati rice needed more quality assurance as it is not parboiled rice and exported globally with a high product value. In this present work, the basic problem of quality assessment in rice industry is addressed with digital image processing based technique. Machine vision and digital image processing provide an alternative with the automated, nondestructive, cost-effective, and fast approach as compared with traditional method which is done manually by human inspectors. A model of quality grade testing and identification is built based on morphological features using digital image processing and knowledge based adaptive neuro-fuzzy inference system (ANFIS). The qualities of rice kernels are determined with the help of shape descriptors and geometric features using the sample images of milled rice. The adopted technique has been tested on a sufficient number of training images of basmati rice grain. The proposed method gives a promising result in an evaluation of rice quality with 100% classification accuracy for broken and whole grain. The milling efficiency is also assessed using the ratio between head rice and broken rice percentage and it is 77.27% for the test sample. The overall results of the adopted methodology are promising in terms of classification accuracy and efficiency.

Tiger nut (Cyperus esculentus) is an edible perennial grass-like plant that has long been recognized for its health benefits as it is rich in fiber, protein, vitamins, minerals and natural sugars. It can be eaten raw, roasted or made into a refreshing milk which is very nutritive and healthy for consumption. There were several efforts to mass-produce the locally prepared tiger nut milk in our locality, but the fact that it has a shorter shelf-life, brings about a hindrance. The main objective of the present study is to unveil the cause for the easily spoilage of tiger nut milk and device ways to promote its production using different treatments. Tiger nut milk products were prepared using different methods; water soaked tiger nut milk (WSTM), toasted tiger nut milk (TTM), methanol soaked tiger nut milk (MSTM), and the pasteurised tiger nut milk (PTM). Each of these milk proucts prepared was divided into two portions; the first portion is treated with an antibiotic preservative, Nisin and the second portion was left untreated. The two portions were further divided into two; one stored at refrigerating temperature and the other at room temperature, making four different treatments per mixture and a total of 16 samples. These samples were subjected to proximate analysis; protein, fat, moisture, ash and carbohydrate. The chemical composition of the samples was significantly (P < 0.05) affected by processing treatment. All the samples had high moisture content, and a considerable amount of fat. The preservative treated samples that received pasteurized treatment were found to stay more than a week with fair quality. Findings from the study shows that the chemical characteristics of the various milk products were significantly affected by the different processing treatments.

This study investigates the properties of solution processed hybrid pol-yimide, PI nanocomposites containing a variety of nanofillers, including polyaniline copolymer modified clay, PNEA, nanographene sheets, NGS, and carbon nanotube sheet, CNT-PVDF, respectively. Through a series of experiments, the flow behavior of poly(amic acid), PAA solution and PAA suspension containing polyaniline copolymer modified clay, PNEA was determined as a function of the shear rate, processing temperature and polymerization time. It is shown that the neat PAA solution exhibited a complex rheological behavior ranging from shear thickening to New-tonian behavior with increasing shear rate and testing temperature. The presence of modified clay in PAA solution significantly reduced the viscosity of PAA. Differential Scanning Calorimetry (DSC) analysis show that polyimide-nanographene sheets, PI NGS nanocomposites processed at high spindle speed (100 rpm) had lower total heat of decomposition which is indicative of improved fire retardancy. The effect of processing temperature on the specific capacitance of polyimide-CNT-PVDF composites containing electrodeposited polypyrrole fillers was determined by using cyclic voltammetry, CV. It was shown that the hybrid composite working electrode material processed at 90˚C produced a remarkably higher overall stored charge when compared to the composite electrode material processed at 250˚C. Consequently, the specific capacitance ob-tained at a scan rate of 5 mV/s for the hybrid nanocomposite processed at 90°C was about 858 F/g after 1 cycle, which is about 6.3 times higher than the specific capacitance of 136 F/g produced by the hybrid nanocomposite processed at 250°C. These findings show that the properties of the hybrid nanocomposites are remarkably influenced by the processing conditions and highlights the need for process optimization.

The review of previous works shows this study is the first attempt to analyse the lockdown effect using Natural Language Processing Techniques, particularly sentiment analysis methods applied at large scale. On the other hand, it is also the first of its kind to analyse the impact of COVID 19 on the university community jointly on staff and students and with a multi-country perspective. The main overall findings of this work show that the most often related words were family, anxiety, house and life. On another front, it has also been shown that staff have a slightly less negative perception of the consequences of COVID in their daily life. We have used artificial intelligence models like swivel embedding and the Multilayer Perceptron, as classification algorithms. The performance reached in terms of accuracy metric are 88.8% and 88.5%, for student and staff respectively. The main conclusion of our study is that higher education institutions and policymakers around the world may benefit from these findings while formulating policy recommendations and strategies to support students during this and any future pandemics.

This paper investigates the effects of various process parameters, specifically the substrate temperature, on weld track geometry in Directed Energy Deposition (DED) processes. A specialized experimental setup integrated within a DED machine facilitates controlled thermal conditioning of sample sheets. Through Design of Experiments (DoE) methods, individual weld marks are generated and analysed to assess geometric characteristics. Regression models are constructed to predict machine parameters for desired weld geometry at different substrate temperatures. Validation experiments confirm the accuracy and reliability of the regression models. Results show a consistent trend towards target geometric features across a broad range of substrate temperatures. Despite deviations in measured values, successful fabrication is achieved, demonstrating robust bonding between weld and substrate. Contact angle predictions exhibit precision within a partial temperature range for proper deposition. The developed model offers insights for optimizing DED process parameters to achieve desired weld characteristics, advancing the capabilities and reliability of additive manufacturing technology. Future work aims to refine the regression model and explore additional mathematical relationships for enhanced accuracy. An implication of this work is the potential to vary the local mechanical properties of parts by controlling the temperature profile while maintaining consistent geometric characteristics. By manipulating the substrate temperature, it may be possible to tailor the microstructure and mechanical properties of fabricated components in the future to meet specific requirements in different regions of the part.

Pre-mRNA splicing is an essential process orchestrated by the spliceosome, a dynamic complex assembled stepwise on pre-mRNA. We have previously identified that USH1G protein SANS regulates pre-mRNA splicing by mediating the intra-nuclear transfer of the spliceosomal U4/U6.U5 tri-snRNP complex. During this process, SANS interacts with the U4/U6 and U5 snRNP-specific proteins PRPF31 and PRPF6 and regulates splicing, which is disturbed by variants of USH1G/SANS causative for human Usher syndrome (USH) the most common form of hereditary deaf-blindness.Here, we aimed to gain further insight into the molecular interaction of the splicing molecules PRPF31 and PRPF6 to the CENTn domain of SANS using fluorescence resonance energy transfer assays in cells and in silico deep learning-based protein structure predictions. This demonstrates that SANS directly binds via two distinct conserved regions of its CENTn to the two PRPFs. In addition, we provide evidence that these interactions occur sequentially and a conformational change of an intrinsically disordered region to a short α-helix of SANS CENTn2 is triggered by binding of PRPF6. Furthermore, we found that pathogenic variants of USH1G/SANS perturb the binding of SANS to both PRPFs implying a significance for the USH1G pathophysiology.

In an increasingly resource-constrained era, the utilization approach of waste and by-products from grain processing, is attractive widely, considering both nutritive value and economic aspects and move towards more sustainable food systems. Following the fundamentals of a circular economy, the need of the hour lies in its effective utilization as a grain waste and by-products conversion into value-added products in food industry. The aim of this study is twofold: 1. Understanding the progress of grain waste and by-products to valorization in human nutrition, using bibliometrics; different literature databases namely Google Scholar, Web of Science and Elsevier Scopus have been evaluated for their merits and values; 2. Exploration of knowledge-based strategies, by reviewing the literature concerning the possible use of grain waste and by-products for food processing industry, reducing burden on virgin raw materials. The review allowed to unlock the latest-advances of upcycling side streams and waste from grain processing industry.

This paper proposes several LabVIEW applications to accomplish the data acquisition, processing, features extraction and real-time classification of the electroencephalographic (EEG) signal detected by the embedded sensor of the NeuroSky Mindwave Mobile headset. The LabVIEW applications are aimed at the implementation of a Brain-Computer Interface system, which is necessary to people with neuromotor disabilities. It is analyzed a novel approach regarding the preparation and automatic generation of the EEG dataset by identifying the most relevant multiple mixtures between selected EEG rhythms (both time and frequency domains of raw signal, delta, theta, alpha, beta, gamma) and extracted statistical features (mean, median, standard deviation, route mean square, Kurtosis coefficient and others). The acquired raw EEG signal is processed and segmented into temporal sequences corresponding to the detection of the multiple voluntary eye-blinks EEG patterns. The main LabVIEW application accomplished the optimal real-time artificial neural networks techniques for the classification of the EEG temporal sequences corresponding to the four states: 0 - No Eye-Blink Detected; 1 - One Eye-Blink Detected; 2 – Two Eye-Blinks Detected and 3 – Three Eye-Blinks Detected. Nevertheless, the application can be used to classify other EEG patterns corresponding to different cognitive tasks, since the whole functionality and working principle could estimate the labels associated with various classes.

Background: This study aims to explore children’s social information processing (SIP) as an ex-planatory mechanism in the link between parent-child relationship and children’s learning diffi-culties; (2) Methods: The sample included 115 kindergarteners (62 girls; 53 boys; Mage = 68.5 months, SD = 6.04), their parents and the school teacher. Parents reported on relationship quality with the child and teachers reported on children’s learning difficulties and school achievements. Children’s SIP was assessed with the social information processing interview – preschool version (3) Results: Mother and father relationship quality with the child associated with children’s SIP, however, only the father's but not the mother's quality of relationship with the child was associ-ated with children’s learning difficulties and school achievements. Children’s SIP mediated this latter link; (4) Conclusions: Parents’ relationship quality with the child and children’s SIP are pertinent factors in children’s learning in the early years. The father-child relationship seem to be a strong determinant of children approach to learning and achievement and may have long last-ing effect on children's mental health

Transporter associated with antigen processing 1 (TAP1) gene codes for a transporter protein, which is responsible for tumor antigen presentation in the MHC I or HLA complex. A defect in the gene results in an inadequate tumor tracking. TAP1 may also influence multi drug resistance, which is an extreme threat in providing treatment by drugs which are chemotherapeutic. The gene of TAP1 was analyzed bioinformatically. It gave us prognostic data as a confirmation of whether it should be used as a biomarker. The expression level and pattern analysis were conducted using ONCOMINE, GENT2 and GEPIA2 online platforms. Samples with different clinical outcomes were investigated for expression and promoter methylation analysis was done in cancer vs normal tissues using UALCAN. The copy number alteration and mutation frequency and expression in different cancer studies were analyzed using cBioPortal. The PrognoScan and KM plotter survival analysis of significant data (p-value<0.05) was representing graphically. Pathway and Gene ontology analysis of gene correlated to TAP1 gene was presented using bar charts. After arranging the data in a single panel and correlating expression to prognosis, understanding mutational and alterations and comparing pathways, TAP1 may be a potential novel target to evade a threat against chemotherapy and the study gives new aspects to consider for immunotherapy in human breast, lung, liver and ovarian cancer.

The JCR 2022, for the first time, included the ESCI journals, increasing the number of publication titles by approximately 60%. In this paper, the subcategory Mining and Mineral Processing (as part of the Engineering and Geosciences category), where 12 of the ESCI journals were merged with the 20 SCIEx ones, is presented and analysed. Only three of the ESCI journals, that JCR 2022 included in the database, would be ranked in the Q1/Q2. The inclusion of the entire ESCI added new content for readers and authors relying on the JCR sources, and will help the journals in the database to attract more papers and citations in the future. Consequently, part of the journals (probably more than 25% marked in this analysis) will have a bigger chance to reach the Q1/Q2 ranking in the forthcoming years. This paper gives the authors, researchers, and publishers in the Mining and Mineral Processing field practical insights into the potential benefits and challenges associated with the changing landscape of indexed journals, as well as the in-depth, systematic analyses for potential future authors to have the opportunity to select the most suitable journal for submitting their papers.

There are no theorems (proven theories) in the biological sciences. We propose that the 3 31 nt minihelix tRNA evolution theorem be universally accepted as one. The 3 31 nt minihelix theorem completely describes evolution of type I and type II tRNAs from ordered precursors (RNA repeats and inverted repeats). Despite diversification of tRNAome sequences, statistical tests overwhelmingly support the theorem. Furthermore, the theorem relates the dominant pathway for the origin of life on Earth, specifically, how tRNAomes and the genetic code may have coevolved. Alternate models for tRNA evolution (i.e., 2 minihelix, convergent and accretion models) are falsified. In the context of the pre-life world, tRNA was a molecule that via mutation could modify anticodon sequences and teach itself to code. We relate the clearest history to date of the chemical evolution of life on Earth. From analysis of tRNA evolution, ribozyme-mediated RNA ligation was a primary driving force in evolution of complexity during the pre-life to life transition on Earth.

Natural language processing model (NLP) are used in chatbots to understand user input, interpret its meaning, and generate conversational responses to provide immediate and consistent assistance. This reduces problem-solving time and staff workload and increases user satisfaction. There are both rule-based chatbots, which use decision trees and are programmed to answer specific questions, and self-learning chatbots, which can handle more complex conversations through continuous learning about data and user interactions. However, only a few chatbots have been developed specifically for the Italian language. This work proposes an NLP model to develop a powerful and efficient Italian QA (Question Answering) chatbot that is easy to use for Italian Public Administration (PA). The proposed model is based on BERT (Bidirectional Encoder Representations from Transformer) architecture, where an Encoder/Decoder module and a Highway Network module have been added to perform more efficient filtering of input text. The Italian version of the Stanford Question Answering Dataset (SQuAD-IT) is used to test the proposed model. The proposed model is one of the first models developed for Italian language-specific chatbots.

The increasing world steel production has contributed to the generation of million tons of mining residues. But, the huge demand of aggregates for the execution of pavements and the lack of raw material for this purpose, the research for new materials to be used in this area has become vital. The sandy residue that was studied was collected at Mariana– MG county, which was the result of the iron ore processing of the company Samarco S.A. This research has as objective the evaluation of the mechanical behaviour of asphalt mixtures utilizing residue from the processing of iron ore in substitution of the fine aggregate in the asphalt mixtures of the Asphaltic Concrete type, aiming its use in the rolling layer of a road pavement. To do so, the Marshall dosage of three asphalt mixtures and the mechanical tests characterized by the resilient modulus and fatigue life at a controlled tension were performed. It was also performed the determination of the optimum content by the Superpave dosage method conducted in two of these mixtures to obtain the Compaction Index and the mechanical behaviour by the Flow Number value. Concluded that the residue is compatible with all current standards for the use in asphalt mixtures, being able to be used in the CBUQ rolling layer, showing an improvement in the behaviour compared to the standard mixture.

In this study, 3D printing of poly-l-lactic acid (PLLA) scaffolds reinforced with graphene oxide (GO) nanoparticles via Digital Light Processing (DLP) was investigated to mimic bone tissue. Stereolithography is one of the most accurate additive manufacturing method, but the dominant available materials used in this method are toxic. In this research, a biocompatible resin (PLLA) was synthetized and functionalized to serve the purpose. Due to the low mechanical properties of the printed product with the neat resin, graphene oxide nanoparticles in three levels (0.5, 1, and 1.5 Wt.%) were added with the aim of enhancing the mechanical properties. At first, the optimum post cure time of the neat resin was investigated. Consequently, all the parts were post-cured for three hours after printing. Due to the temperature-dependent structure of GO, all samples were placed in an oven at 85 ° C for different time periods of 0, 6, 12, and 18 hours to increase mechanical properties. The compression test of heat treated samples reveals that the compressive strength of the printed parts containing 0.5,1, and 1.5 % of GO increased by 151,162 ad 235%, respectively. Scaffolds with the designed pore sizes of 750 microns and a porosity of 40% were printed. Surface hydrophilicity test was performed for all samples showing that the hydrophilicity of the samples increased with increasing GO percentage. The degradation behavior of the samples was evaluated in a PBS environment, and it revealed that by increasing GO, the rate of component degradation increased, but the heat treatment had the opposite effect and decreased the degradation rate. Finally, besides improving biological properties, a significant increase in mechanical properties under compression can introduce the printed scaffolds as a suitable option for bone implants.

An integrated two-stage metallurgical technology has been developed for processing concentrates from the Olimpiadinskoe deposit with high antimony and arsenic content. The parameters of the alkaline sulphide leaching process of the initial concentrate of the Olimpiadinskoe deposit, providing maximum extraction of antimony in solution at 99% level have been recommended. The L:S ratio = 4,5:1; the concentration of sodium sulphide - 61 g/L; the concentration of sodium-hydroxide – 6,5 g/L; the duration – 3 hours; the temperature – 50 °C. A synergistic effect of alkaline sulphide leach cakes co-processing by sulphuric and nitric acids has been determined. Pre-treatment allows to reduce the composition of nitric acid by converting the carbonates into gypsum and increases the extraction of arsenic by 15 % at the following nitric leaching. Laboratory research of nitric acid leaching of decarbonized cake allowed to set the basic parameters for maximum iron and arsenic extraction in solution (92 and 98 %): the L:S ratio =9:1; the concentration of nitric acid – 6 mol/L; the time – 90 min. The full polynomial equations for iron and arsenic extraction from decarbonised cake have been derived. The model is relevant since the value the determination coefficients for iron and arsenic R2 were 96,7 and 93,2 %. The high value of gold recovery from the cake of two-stage alkaline sulphide and nitric acid leach cake at 95 % has been established. The maximum value of arsenic deposition from the nitrate leach solution in the form of the insoluble deposition As2S3 99,9 %. A basic technological flowsheet diagram for flotation gold-antimony processing for the Olimpiadinskoe deposit has been developed; it includes two redistributions: production of metallic antimony and gold extraction from the nitric leach cake.

This research is aimed to develop the method for damage degree evaluation in metals and alloys during their deformation and destruction based on acoustic emission (AE) technique. Experimental studies were carried out on tensile specimens of high-strength steel with simultaneous registration of AE signals in tested material. It was shown that the time-dependent AE primary parameters, such as the AE signal maximum amplitudes and AE activity, do not have a clear relationship with the material damage degree. This fact makes it difficult to use standard methods for assessing the damage degree of acoustic signal sources, including defects. It was proposed to use the Kolmogorov-Smirnov criterion to differ the processes of metal plastic deformation and crack propagation during the rupture. The possibility of estimating the material damage degree by high-energy AE hits share was shown. Besides, a particular expression was obtained for evaluating the damage degree for the material under study.

Introduction: Social media platforms such as Facebook, LinkedIn, Twitter, among others have been used as a tool for staging protests, opinion polls, campaign strategy, medium of agitation and a place of interest expression especially during elections. Past studies have established people’s opinion elections using social media posts. The advent of state-of-the-art algorithms for unstructured text processing implies tremendous progress in natural language processing and understanding. Aim: In this work, a Natural Language framework is designed to understand Nigeria 2023 presidential election based on public opinion using Twitter dataset. Methods: Raw datasets concerning discourse around Nigeria 2023 elections from Twitter of 2,059,113 18 dimensions were collected. Sentiment analysis was performed on the preprocessed dataset using three different machine learning models namely: Long Short-Term Memory (LSTM) Recurrent Neural Network, Bidirectional Encoder Representations from Transformers (BERT) and Linear Support Vector Classifier (LSVC) models. Personal tweet analysis of the three candidates provided insight on their campaign strategies and personalities while public tweet analysis established the public’s opinion about them. The performance of the models was also compared using accuracy, recall, false positive rate, precision and F-measure. Results: LSTM model gave an accuracy, precision, recall, AUC and f-measure of 88%, 82.7%, 87.2% , 87.6% and 82.9% respectively; the BERT model gave an accuracy, precision, recall, AUC and f-measure of 94%, 88.5%, 92.5%, 94.7% and 91.7% respectively while the LSVC model gave an accuracy, precision, recall, AUC and f-measure of 73%, 81.4%, 76.4%, 81.2% and 79.2% respectively. Conclusion: The experimental results show that sentiment analysis and other Natural Language Processing tasks can aid in the understanding of the social media space. Results also revealed the leverage of each aspirant towards winning the election. We conclude that sentiment analysis can form a general basis for generating insights for election and modeling election outcomes.

The production of coffee leaf tea (Coffea arabica) in El Salvador and the influences of processing steps on non-volatile compounds and volatile aroma-active compounds were investigated. The tea was produced according to process steps of conventional tea (Camellia sinensis) with available possibilities on the farm. Influencing factors were the leaf type (old, young, yellow, shoots), processing (blending, cutting, rolling, freezing, steaming), drying (sun drying, oven drying, roasting) and fermentation (wild, yeast, Lactobacillus). Subsequently, the samples were analysed for the maximum levels of caffeine, chlorogenic acid, and epigallocatechin gallate permitted by the European Commission. The caffeine content varied between 0.37 g/100 g dry mass (DM) and 1.33 g/100 g DM, the chlorogenic acid between not detectable and 9.35 g /100 g DM and epigallocatechin gallate could not be detected at all. Furthermore, water content, essential oil, ash content, total polyphenols, total catechins, organic acids, and trigonelline were determined. Gas chromatography—mass spectrometry-olfactometry and calculating of the odour activity values (OAVs) were carried out to determine the main aroma-active compounds, which are β-ionone (honey-like, OAV 132-927), decanal (citrus-like, floral, OAV 14-301), α-ionone (floral, OAV 30-100), (E,Z)-2,6-nonadienal (cucumber-like, OAV 18-256), 2,4-nonadienal (melon-like, OAV 2-18), octanal (fruity, OAV 7-23), (E)-2 nonenal (citrus-like, OAV 1-11), hexanal (grassy, OAV 1-10), and 4-heptenal (green, OAV 1-9).

Despite the development of technologies, modern methods of disposal of end-of-life tires most often represent either the incineration in cement kilns or the destruction of tires in special landfills, showing a lack of sustainable recycling of this valuable material. The fundamental role of recycling is evident, and the development of high-efficiency processes represents a priority for the European market. Therefore, investigation of end-of-life rubber processing methods is of high importance for manufacturers and recyclers of rubber materials. In this paper, methods of processing of end-of-life tires are reviewed in order to obtain rubber crumb, which can later be used in the production of new industrial rubber goods and composite The processes of separation end-of-life tire into fractions by type of materials using mechanical processing methods along with mechanochemical and mechanical processes of processing the materials of used tires in order to obtain crumb rubber of various fractions and chemical reactivity are considered.

3M syndrome is a rare disorder that involves the gene CUL7. CUL7 modulates odour detection, conditions the olfactory response (OR) and plays a role in olfactory system development. Despite this involvement, there are no direct studies on olfactory functional effects in 3M syndrome. The purpose of the present work was to analyse the cortical OR, through chemosensory event-related potentials (CSERP) and power spectra calculated by electroencephalogram (EEG) signals recorded in 3M infants: two twins (3M-N) and an additional subject (3M-O). The results suggest that olfactory processing is diversified. Comparison of N1 and LPC components indicated substantial differences in 3M syndrome that may be a consequence of a modified olfactory processing pattern. Moreover, the presence of delta rhythms in 3M-O and 3M-N clearly indicates their involvement with OR, since the delta rhythm is closely connected to chemosensory perception, in particular to olfactory perception.

3M syndrome is a rare disorder that involves the gene CUL7. CUL7 modulates odour detection, conditions the olfactory response (OR) and plays a role in olfactory system development. Despite this involvement, there are no direct studies on olfactory functional effects in 3M syndrome. The purpose of the present work was to analyse the cortical OR, through chemosensory event-related potentials (CSERP) and power spectra calculated by electroencephalogram (EEG) signals recorded in 3M infants: two twins (3M-N) and an additional subject (3M-O). The results suggest that olfactory processing is diversified. Comparison of N1 and LPC components indicated substantial differences in 3M syndrome that may be a consequence of a modified olfactory processing pattern. Moreover, the presence of delta rhythms in 3M-O and 3M-N clearly indicates their involvement with OR, since the delta rhythm is closely connected to chemosensory perception, in particular to olfactory perception.

Background: Diet is a risk factor for gestational diabetes mellitus (GDM). There are few studies on women´s diet and glucose tolerance test (GTT) results. Objective: To evaluate the relationship between previous diet and the number of abnormal values on the diagnostic GTT in women with GDM. We hypothesized there would be an inverse relation between antioxidant micronutrient consumption and the number of abnormal GTT values. Methods: This cross-sectional study included 60 women diagnosed with GDM (2-hours, 75g-GTT). Shortly after diagnosis, participants answered a validated food frequency questionnaire to assess food consumption in the last 6 months. Mann-Whitney´s test was used to compare the dietary intake of participants with one (group 1) versus two-three (group 2) abnormal GTT values. Results: Participant characteristics were similar. There were no significant differences between groups in median intake of total calories, carbohydrates, lipids and proteins. Participants in group 1 had significantly higher intakes of fiber (11.9 vs. 11.0 g/day p= 0.049), vitamin D (40.6 vs. 40.4 mcg/day p= 0.049) and vitamin C (180.0 vs. 151.0 mg/day p= 0.008) than those in group 2. Conclusion: Results suggest a possible association between consumption of fiber and some antioxidant micronutrients and GDM severity at the time of diagnosis.

During the last two years the COVID-19 pandemic has affected the world population in several ways. An important increase in mental health problems is a consequence of this pandemic that is ubiquitous worldwide. In this work we study the effect of the pandemic on the mental health of a population of teenagers and youth based on the analysis of natural language processing, machine learning algorithms and expert knowledge. The data analysed was obtained from a chat helpline called Safe time from theIt Get’s Better Foundation in Chile. The data consists of 10,986 conversations gathered from 2018 until 2020 between volunteers from the foundation and users of the platform. We compared the conversationsbefore and during the pandemic in terms of their thematic content. Our analysis found: a significantdecrease in self-image appreciation during the pandemic; a significant decrease in the quality of personalrelationships during the pandemic, and a significant increase of performance appreciation.

The Trail Making Test (TMT) is one of the most commonly administered tests in clinical and research neuropsychological settings. The two parts of the test [part A (TMT-A) and part B (TMT-B)] enable the evaluation of visuoperceptual tracking and processing speed (TMT-A), as well as divided attention, set-shifting and cognitive flexibility (TMT-B). The main cognitive processes that are assessed using TMT, i.e. processing speed, divided attention and cognitive flexibility, are often affected in patients with stroke. Considering the wide use of TMT in research and clinical settings since its introduction in neuropsychological practice, the purpose of our review was to provide a comprehensive overview on the use of TMT in stroke patients in an attempt to mainly identify its role for the evaluation of post-stroke cognitive dysfunction and progression over time, the identification of the underlying neuroanatomical pathology related to impaired TMT performance, and the association with other stroke outcomes, such motor function, driving ability and quality of life. Our comprehensive review underscores that the TMT stands as an invaluable asset in the stroke assessment toolkit, contributing nuanced insights into diverse cognitive, functional, and emotional dimensions. As research progresses, continued exploration of the TMT potential across these domains is encouraged, fostering a deeper comprehension of post-stroke dynamics, and enhancing patient-centered care across hospitals, rehabilitation centers, research institutions, and community health settings. Its integration into both research and clinical practice reaffirms TMT status as an indispensable instrument in stroke-related evaluations, enabling holistic insights that extend beyond traditional neurological assessments.

In this paper, the effect of multi-pass friction stir processing on the mechanical properties of AZ91 alloy has been studied. For the numerical investigation, this process has been simulated with the three-dimensional numerical modeling based on the ABAQUS/Explicit. This simulation involves the Johnson-Cook models for defining the material behavior during this intense plastic deformation and investigating the fracture criterion. The tool plunging and stirring phases in the two-pass process has been simulated. To prevent too much distortion of elements during modeling, the Arbitrary Lagrangian-Eulerian technique for automatically re-meshing of distorted elements has been used. The model was calibrated using the experimental results from the previous works. This model can predict the transient temperature distribution and residual stress field during FSP on AZ91. The results show that the maximum temperature in the advancing-side region is more than that in the retreating-side region. In addition, numerical results show that at the end position of the process, the tool during the lift-up leaves the keyhole region in the compressive stress state. The experimental results investigated the effect of multi-pass FSP on the microstructure, microhardness, tensile and creep properties of AZ91 magnesium alloy. The FSP is performed by applying 50% overlapping. The tensile, and creep tests are conducted at several temperatures from 25 to 210 °C. The optical microscopy and scanning electron micrograph (SEM) were used to study the microstructure of the samples after performing multi-pass friction stir processing. The experimental results indicate that on average, the tensile strength, microhardness, and creep strength of the processed samples increased by about 29, 23, and 38 %, respectively compared to the unprocessed ones.

The present study aimed at investigating the influence of the concentration of sodium silicate and sodium hexametaphosphate on the dispersion of an aqueous kaolinitic clay slurry regarding further use for the tape casting process. The zeta potential of the kaolinitic clay slurry matched the requirements for tape casting. The addition of magnesite in the kaolinitic slurries tended to increase the zeta potential towards the required limit values. Despite, the further addition of surfactants allowed improving the zeta potential in agreement with the tape casting conditions. Accordingly, the rheological behavior, under continuous and oscillatory flow conditions, of various mixtures of magnesite and a kaolinitic clay was studied. Regarding the pH and the zeta potential measurements, the E–F attraction prevailed at low pH value, and F–F or E–E attraction was predominant at high pH value. All slurries exhibited a shear thinning behavior, which was well-correlated by Herschel–Bulkley model. It appeared that the best stability for the kaolinitic clay slurries was obtained while using 0.4 mass% and 1.2 mass% of sodium hexametaphosphate and sodium silicate respectively. An increase in the magnesite concentration above 6 mass% led to a complex behavior with low cohesion energy due to the occurrence of soluble complexes.

Automatic recognition methods for non-stationary EEG data collected from EEG sensors play an essential role in neurological detection. The integrative approaches proposed in this study consists of Symlet wavelet processing, a gradient boosting machine, and a grid search optimizer for a three-level classification scheme for normal subjects, intermittent epilepsy, and continuous epilepsy. Fourth-order Symlet wavelets were adopted to decompose the EEG data into five time-frequency sub-bands, whose statistical features were computed and used as classification features. The grid search optimizer was used to automatically find the optimal parameters for training the classifier. The classification accuracy of the gradient boosting machine was compared with that of a support vector machine and a random forest classifier constructed according to previous descriptions. Multiple-index were used to evaluate the Symlet wavelet transform-gradient boosting machine-grid search optimizer classification scheme, which provided better classification accuracy and detection effectiveness than has recently reported in other work on three-level classification of EEG data.

Given the increasing public interest in how ingredients are processed and the growing demand for organic food products, it is critical to understand consumers’ expectations about the process-related quality of organic products. Consumers perceive organic food to be nutritious, healthy and either natural or less processed, as they are afraid of the loss of nutrients and other natural properties of the food products. However, emerging food processing technologies might generate healthy and safe food options with nutritional quality properties. Simplified communication schemes might help to overcome this barrier. The main objective of this paper is to propose a working definition of "careful processing" for organic products and test its consistency while being used in scoring different processing methods by consumers. Results show that the proposed definition allows to consistently rate alternative processing methods. Consumers tend to score novel processing methods such as pulsed electric fields and microwave as less careful, supporting the idea that organic consumers want the least man-made interference with their food products. Results show that a simple but effective definition of careful processing may help consumers to distinguish further organic food products from conventional ones, no matter which communication scheme is used.

Anchovies are amid the largest fish catch worldwide. The anchovy fillet industry generates a huge amount of biowaste (e.g. fish heads, bones, tails) that can be used for the extraction of several potentially valuable bioproducts including omega-3 lipids. Following the extraction of valued fish oil rich in omega-3, vitamin D₃ and zeaxanthin from anchovy fillet leftovers using biobased limonene in a fully circular process, the solid residue was used as starting substrate for the production of biogas by anaerobic digestion. The results first reported in this study demonstrate good potential energy recovery of the anchovy sludge of about 280 mL_CH4∙g_VS^-1. Due to unbalanced C/N ratio typical of marine biowaste, co-digestion with a carbon rich substrate is recommended.

Mercury is a toxic metal, thus, it is an element which has more and more restrictions in its uses, but despite the above, the removal of this metal, from whatever the form in which it is encountered (zero valent metal, inorganic or organic compounds), and from different sources, is of a widespread interest. In the case of Hg(II), or Hg²⁺, the investigations about the treatment of Hg(II)-bearing liquid effluents (real or in most cases synthetic solutions) appear not to end, and from the various separation technologies, adsorption is the most popular among researchers. In this topic, and in the 2019 year, more than 100 publications had been devote to this field: Hg(II)-removal-adsorption. This work examined all of them.

Extracts from parts of coniferous trees have received increased interest due to their valuable bioactive compounds and properties, useful for plenty of experimental and consolidated applications, in fields comprising nutraceutics, cosmetics, pharmacology, food preservation, and stimulation of plant growth. However, the variability of the bioactive properties, the complexity of the extraction methods, and the use of potentially harmful synthetic chemicals, still represent an obstacle to the spreading of such valuable natural compounds. Hydrodynamic cavitation is emerging as a promising innovative technique for the extraction of precious food components and by-products from waste raw material of the agro-food production chain, which can improve processing efficiency, reduce resource consumption, and produce healthy, high-quality products. In this study, a process based on controlled hydrodynamic cavitation was applied for the first time to the production of aqueous solutions of silver fir (Abies Alba Mill.) needles with enhanced antioxidant activity. The observed levels of the in vitro antioxidant activity, comparable or higher than those found for reference substances, pure extracts, and other water extracts and beverages, highlight the very good potential of the HC process for the creation of solvent-free, aqueous solutions endowed with bioactive compounds extracted from silver fir needles.

Flow field based methods are becoming increasingly popular for the analysis of interfacial shear rheology data. Such methods take properly into account the subphase drag by solving the Navier-Stokes equations for the bulk phases flows, together with the Boussinesq-Scriven boundary condition at the fluid-fluid interface, and the probe equation of motion. Such methods have been successfully implemented at the double wall-ring (DWR), the magnetic rod (MR), and the bicone interfacial shear rheometers. However, a study of the errors introduced directly by the numerical processing is still lacking. Here we report on a study of the errors introduced exclusively by the numerical procedure corresponding to the bicone geometry at an air-water interface. In our study we directly input a preset the value of the complex interfacial viscosity and we numerically obtain the corresponding flow field and the complex amplitude ratio for the probe motion. Then we use the standard iterative procedure to obtain the calculated complex viscosity value. A detailed comparison of the set and calculated complex viscosity values is made upon changing different parameters such as real and imaginary parts of the complex interfacial viscosity and frequency. The observed discrepancies yield a detailed landscape of the numerically introduced errors.

The paper presents the results of the research concerning an evaluation of information 1 technology of gene expression profiles processing stability with the use of gene expression profiles 2 with different levels of noise component. The information technology is presented as a structural 3 block-chart, which contains all stages of the studied data processing. The hybrid model of objective 4 clustering based on SOTA algorithm and the technology of gene regulatory networks reconstruction 5 have been studied to evaluate the stability to the level of the noise component. The results of the 6 simulation have shown that the hybrid model of objective clustering has high level of stability 7 to noise component and vice versa, the technology of gene regulatory networks reconstruction is 8 very sensitivity to level of noise component. The obtained results indicate the importance of gene 9 expression profiles preprocessing at early stage of gene regulatory network reconstruction in order to 10 remove background noise and non-informative genes in terms of used criteria

The aim of the present study was to evaluate the effects on the presence and distribution of oxyntopeptic cells (OPs) and enteroendocrine cells (EECs) expressing GHR, NPY and SOM in the gastric mucosa of European seabass and seabream of dietary levels of bioactive peptides (BPs) obtained from salmon processing by-products (in silico approach). In this study, 27 seabass and 27 seabreams were divided into three experimental groups: a control group (CTR) fed a control diet and two groups fed different levels of BP to replace fishmeal: 5% BP (BP5%) and 10% BP (BP10%). The stomach of each fish was sampled and processed for immunohistochemistry. Some SOM, NPY and GHR-IR cells exhibited alternating “open type” and “closed type” EECs morphologies. In seabream gastric mucosa, the BP10% group (16.8 ± 7.5) showed a significant change in NPY-IR cell number compared to CTR (CTR 8.5 ± 4.8) and BP5% (BP10% vs. CTR P ≤ 0.01; BP10% vs. BP5% P ≤ 0.05). In seabream, SOM-IR cells in the BP 10% diet (16.8 ± 3.5) differed from those in CTR (12.5 ± 5) (CTR vs. BP 10% P ≤ 0.05) and BP 5% (12.9 ± 2.5) (BP 5% vs. BP 10% P ≤ 0.01). In seabass, EEC SOM-IR cells increased at 10 % BP (5.3 ± 0.7) compared to 5 % BP (4.4 ± 0.8) (5 % BP vs. 10 % BP P ≤ 0.05). The results obtained suggest that salmon BPs have a promising impact as circulating ingredients for seabass and seabream.

Gastrodia elata Bl., one of the well-known edible plants in China, belongs to the family of Orchidaceae. In recent years, the consumption rate of this plant as food supplements or health products is gradually rising in China. However, the traditional industrialization processing procedures (TP) for this plant was found to be too complicated and not friendly to the environment with time and energy consuming. Hence, we investigated whether the processing procedures could be simplified without affecting its overall chemical profile and anti-oxidation activity. In this experiment, a new processing procedure (NP) was designed for processing this plant, and the chemical compositions of the extract for Gastrodia elata produced by two different processing procedures were identified by UPLC-Q-TOF/MS. It was found that phenols and parisins were the most abundant chemical components for this extract. Among all the identified components, the contents of gastrodin and its citric acid derivatives were obviously higher than that of other components. Therefore, the contents of six gastrodin derivatives and ethanol soluble extract rate for Gastrodia elata produced by two different processing procedures, traditional and newly designed processing procedures, were further comparatively investigated for the validation of the applicability. The DPPH radical scavenging activities of the extract from Gastrodia elata produced by two different processing procedures were also investigated. The results demonstrated that the contents of gastrodin and p-hydroxybenzyl alcohol in all samples were slightly decreased in NP samples compared with that of TP samples (except batches of S3 and S6 samples), but no significant difference was observed between these two groups (p = 0.8273 for gastrodin and p= 0.2320 for p-hydroxybenzyl alcohol). Additionally, the total contents of parisins were also in a decreased trend in NP samples but with no significant difference when comparing with that in TP samples (p = 0.1721). The results for ethanol soluble extract rate also had the same situation (p = 0.1094). Taken together, it was suggested that the chemical profiles and contents of gastrodin derivatives and ethanol soluble extract rate for NP samples was not significant different to that of TP samples. The DPPH radical scavenging activity of the extract of Gastrodia elata produced with NP method was not significant different from that of TP samples. As a result, the industrial processing procedures for the preservation of this material plant could be simplified to a more time and energy saving procedure without changing the quality of the products, which is also consistent with the concept of green and sustainable industrial production.

Since the exploitation of mineral resources results in the release of radionuclides, and consuming radionuclides affects public health in the short and long term. A case study of the environmental radiation impact from coal mining and germanium processing was carried out in southwest China. The coal mines contain germanium and uranium and have been exploited for more than 40 years. The farmlands around the site of coal mining and germanium processing have been contaminated by the solid waste and mine water in some extend since then. Samples of crops have been collected from contaminated farmlands in research area. The research area covers a radius of 5 km, in which there are 2 coal mines located. 210Pb and 210Po have been analyzed as the key radionuclides during monitoring program. The average activity concentrations of 210Pb and 210Po in the crops were 1.38 and 1.32 Bq/kg in cereals, 4.07 and 2.19 Bq/kg in leafy vegetables and 1.63 and 1.32 Bq/kg in root vegetables. The annual effective doses due to the ingestion of 210Pb and 210Po in consumed crops have been estimated for adult residents living in research area. The average annual effective dose was 0.336mSv/a, while the minimum was 0.171 mSv/a and the maximum was 0.948 mSv/a. The results show that crops grown on contaminated farmland contained an enhanced level of radioactivity concentration. Ingestion doses of local residents in research area were significantly higher than the China average level of 0.112 mSv/a, and the world average level of 0.042 mSv/a through 210Pb and 210Po in crops intake respectively.

Cartilage regeneration requires a balance of anabolic and catabolic processes. This study examined the susceptibility of fibromodulin (FMOD) and lumican (LUM) to degradation by MMP-13, ADAMTS-4 and ADAMTS-5, the three major degradative proteinases in articular cartilage in osteoarthritis (OA). Immunolocalisation of FMOD and LUM in foot sections of developmental cartilages demonstrated prominent localisations in metatarsal and phalangeal foetal rudiment cartilages and growth plate. An MMP-13 neoepitope antibody (TsYG11) demonstrated localisation of MMP-13 cleaved FMOD in the hypertrophic chondrocytes of the metatarsal growth plate. FMOD was more prominently localised in the superficial cartilage of normal and fibrillated zones in OA cartilage, TsYG11 positive FMOD was located deeper in the cartilage samples. Ab TsYG11 also identified FMOD fragmentation in Western blots of extracts of normal and fibrillated cartilage and total knee replacement OA cartilage. The C-terminal anti-FMOD used in this study (PR-184) failed to identify FMOD fragmentation due to C terminal processing, an equivalent Ab to the C-terminus of LUM (pAb PR-353) identified 3 prominent LUM fragments in OA human knee cartilages. In-vitro digestion of human knee cartilage with MMP-13, ADAMTS-4 and ADAMTS-5 generated equivalently sized FMOD fragments of 54, 45 and 32kDa to those in blots of OA cartilage, LUM was not less susceptible to fragmention in in-vitro digestions however Ab PR-353 detected N-terminally processed LUM fragments of 39, 38 and 22 kDa in 65-80 year old OA knee cartilage. FMOD and LUM were differentially processed during in-vitro digestions with MMP-13, ADAMTS-4 and ADAMTS-5 with FMOD susceptible to degradation by MMP-13, ADAMTS-4 and to a lesser extent ADAMTS-5 however LUM was less susceptible to fragmentation. FMOD was processed by MMP-13 in metatarsal and phalangeal foetal rudiment developmental cartilages and growth plate indicating a role in skeletogenesis.

Carotenoid and carotenoid esters profiles of peel, pulp and whole fruit tissues of astringent persimmon (Diospyrus kaki Thunb., var. Rojo Brillante) have been characterized in detail and quantified for the first time. Carotenoids were determined by HPLC-PDA-MS/MS (APCI+), using a reverse phase C30 column. A total of 38 carotenoids were identified and quantified, corresponding to 21 free carotenoids (13 xanthophylls and 8 hydrocarbon carotenes) and a total of 17 carotenoid esters. The qualitative profiles are very similar among tissues, differing only in the carotenoids concentration. The most important identified free xanthophylls were (all-E)-β-cryptoxanthin, (all-E)-antheraxanthin, (all-E)-lutein, (all-E)-zeaxanthin and (all-E)-violaxanthin . Hydrocarbon carotenoids found were (all-E)-β-carotene, (all-E)-α-carotene, (9Z)-β-carotene, (13Z)-β-carotene, (9Z)-α-carotene, and lycopene. The most abundant carotenoid esters were (all-E)-lutein-3-O-palmitate, (all-E)-zeaxanthin myristate, (all-E)-zeaxanthin palmitate and (all-E)-cryptoxanthin laurate. Processing by high pressures produced no regular effect on persimmon carotenoids and pasteurization affected negatively the content of all carotenoids from all studied persimmon tissues. This work will contribute to the development of scientific research about the bioaccessibity and bioavailabity of each individual free or esterified persimmon carotenoids in order to a better understanding of the carotenoid compounds impact in human health.