Bulukumba Regency, South Sulawesi, Indonesia is one of the centres for whiteleg shrimp, Litopenaeus vannamei production that applies intensive technology. However, no information has been obtained regarding the characteristics and status of water quality in coastal areas with environmentally friendly concepts and the potential to receive a waste load. The study aimed to determine the performance of whiteleg shrimp culture in relation to temporal and spatial aspects and characteristic and water quality status. Measurement and sampling of water were carried out before stocking/initial of culture whiteleg shrimp (rainy season) and end of culture/after harvesting of whiteleg shrimp (dry season) at two locations in the coastal area of ​​Bulukumba Regency, namely Bonto Bahari Subdistrict (BB) and Gantarang Subdistrict (GT). Variables measured and analyzed included temperature, salinity, pH, dissolved oxygen, nitrate, nitrite, ammonia, phosphate, total suspended solids, and total organic matter. Data analysis with descriptive statistics, multivariate statistics, and non-parametric statistics. The Storet (Storage and Retrieval) method was used to determine the water quality status. The results showed that the culture of whiteleg shrimp was technology-intensive with a stocking density of 110 - 220 ind/m² with productivity between 13.9 - 44.4 tons/ha/cycle. The predicted waste load of N is 28.00 tons/cycle and P reaches 6.61 tons/cycle. Another result was that changes in water quality status during the rainy season were classified as moderately polluted at the BB location and complying quality standards at the GT location, while in the dry season, both locations were categorized as heavily polluted. Variables of water quality that caused the decrease in water quality status in both locations (BB and GT) were observed to increase salinity, nitrate concentration, and ammonia concentration. However, there was a decrease in dissolved oxygen concentration in the dry season.

The European Bioeconomy Strategy aims to strengthen and boost biobased sectors, unlocking investments and markets while rapidly deploying local bioeconomies across Europe and improving compliance with environmental and social sustainability goals. Current biomass provision structures and infrastructure might not be able to tap the sustainable potential of forestry-, agricultural residues and biogenic waste envisaged forming the biogenic feedstock base of the Circular Bioeconomy of tomorrow. Therefore, for the present paper, we assess mobilization strategies, their current status, opportunities, and barriers for local low value and heterogenous biomass resources. Based on discussions with bioenergy supply chain experts, we cluster mobilization measures into three assessment levels; the legislative framework, market structures and technological innovation. Scientific literature research on the respective keywords is performed, the European policy landscape mapped, and the results are enriched with anecdotal evidence, especially for recent and running projects and market developments that lack in published track records. We can identify research needs on all three assessment levels. Still, technological development and legislative frameworks are providing support for heterogeneous biomass mobilization. Market creation, however, represents a bottleneck. We provide novel perspectives, how physical- and virtual bio-hubs and crediting stake- and shareholder variety could create added-value based on sustainable primary economic activities and their cascading activities.

COVID-19 poses a significant burden to healthcare systems. Healthcare organisations with a better health innovation infrastructure have faced a reduced burden and achieved success in curbing COVID-19. In Saudi Arabia, digital technologies have played a vital role in fighting SARS-CoV-2 transmission. In this paper, we aimed to summarise the experience of optimising digital health technologies in Saudi Arabia as well as discuss capabilities and opportunities during and beyond the COVID-19 pandemic. A literature review was conducted up to September 2021 to retrieve peer-reviewed articles that critique the use of digital health technology platforms (DHTPs) in Saudi Arabia during the COVID-19 outbreak. A small but significant body of literature examined the digital response to the COVID-19 pandemic in Saudi Arabia. Health officials succeeded in optimising and maintaining a strategy to mitigate the spread of the virus via different digital technologies, such as mobile health applications, artificial intelligence, and machine learning. The quick digital response in Saudi Arabia was facilitated by governmental support and considering users and technology determinants. Future research must concentrate on establishing and updating the guidelines for using DHTPs.

The Residential and Industrial zones as is, rely heavily, if not exclusively, on Hydrocarbons. Hydrocarbon thermal machinery such as Spark Ignition-Compression Ignition engines, Gasoline-Diesel generators, Coal-Lignite gasifiers, residential diesel-powered heating systems, Pyrolysis units and so on, are commonly met all around the planet. Such technology practically oxidizes Hydrocarbons to produce either heat, steam or useful mechanical work depending on the application, though energy losses are not, by any means, insignificant. Advanced material processing is an industrial sector who’s energy demand is significant and it is important for the general public to come to terms with the fact that by implementing Hydrogen technology to power such plant while at the same time improving the energy equilibrium of houses(advanced materials), communities would be taking major steps towards Climate Change effects debilitation. The downside of Hydrocarbon thermochemical exploitation can be described by the limited resources-reserves and the gaseous pollutant emissions (CO2, CO, NOx, SOx). In recent years, the Industrial zone as a whole has began taking a turn towards Electrification without having established the necessary infrastructure to support such a transition. Indicatively, at current rate of production, dead Lithium-Ion batteries are projected to reach as high as 11,000 metric tons by 2030, yet there is no recycling scheme in place, not to mention the prospect of that number rising even more, given the recent e-mobility trend. As it pertains to Electrification, such powertrains-machinery require electricity and a battery. Electricity production is mainly achieved through Coal-Lignite gasification, Batteries require metals, among others, for manufacturing, meaning that up-on mining, local water resources are contaminated, another very important ‘aspect’ of Lithium(per say) mining is that child labor is often associated with such processes, a truly despicable act. All of the above paint a crystal-clear picture as to how ‘environmentally friendly’ reckless-rushed Electrification really is. Climate Change is up-on us and it’s effects on the planet are obvious, the most important of which is glacier melting due to rising of the global Temperature. The COVID-19 crisis is a sign of what could come from glacier melting could as ice contains potentially harmful-toxic to humans, biological entities that are sure to be introduced to the general public if we were to continue exploiting mineral resources. Purpose of this paper is to provide a general overview of the technology around Hydrogen.

In recent years information and communication technologies (ICT) play a significant role in all aspects of modern society and impact socioeconomic development in sectors as education, administration, business, medical care and agriculture. The benefits of such technologies in agriculture can be appreciated only if farmers use them. In order to predict and evaluate the adoption of these new technological tools, the technology acceptance model (TAM) can be a valid aid. The paper measures the potential acceptance of an e-learning tool designed for EU farmers and agricultural entrepreneurs. Starting from a literature review of the technology acceptance model, by analyzing the most commonly used external variables in the fields of e-learning, Agriculture, and Virtual reality, the analysis shows that computer self-efficacy, individual innovativeness, computer anxiety, perceived enjoyment, social norm, content and system quality, experience and facilitating conditions are the most common determinants addressing technology acceptance. Furthermore, findings evidenced that the external variables have a different impact on the two main beliefs of the TAM Model, Perceived Usefulness (PU) and Perceived Ease of Use (PEOU). This study is expected to bring theoretical support for academics when determining the variables to be included in TAM extensions.

Climate change and food security are the most relevant issues to be considered in sustainable agricultural development. The FAO’s initiative of climate-smart agriculture has attracted international attention. Since then, the smart agriculture (SA) has been recognized as the most influential trends in contributing to agricultural development. Therefore, encouraging farmers to adopt digital technologies and mobile devices into farming practices becomes a policy priority worldwide. However, there is limited literature available on psychologic factors that drive farmers’ intentions to adopt SA technologies. The purpose of this study is to investigate how farmer’s knowledge and attitude toward SA affects their adoption of smart technologies in Taiwan. A total of 321 farmers participated in the project’s survey in 2017 and 2018, from which the data was used to perform an OLS regression model of SA adoption. This study contributes to a preliminary understanding of relationship between innovation and adoption of SA technologies in a small-scale farming economic context. The findings suggest that the policy makers and R&D institutes need to concentrate on improving market access for well-known and high important SA technologies.

The paper is focused on the examination of the internal quality of joints created in a multi-material - additive manufacturing process. The main part of the work focuses on experimental production and non-destructive testing of restrained joints of modified PLA (polylactic acid) and ABS (Acrylonitrile butadiene styrene) 3Dprinted on RepRap 3D device that works on the "open source" principle. The article presents the outcomes of non-destructive materials test in the form of the data from the Laser Amplified Ultrasonography, microscopic observations of the joints area and tensile tests of the specially designed samples. The samples with designed joints were additively manufactured of two materials: specially blended PLA (Market name – PLA Tough) and conventionally made ABS. The tests are mainly focused on the determination of the quality of material connection in the joints area. Based on the results obtained, the samples made of two materials were compared in the end to establish which produced material joint is stronger and have a lower amount of defects.

(1) Background: Most of the existing studies focus on the evaluation of technology finance; the relationship between technology finance and technology innovation. But there are few studies on the development of technology finance and the quality of economic development in our country; (2) Methods: Based on the panel data of 30 provinces in China, this paper constructs an index system to measure the development of technology finance through the improved entropy method, and tests the spatial correlation of the development of technology finance in China by Moran'I index. According to the test results, this paper constructs a spatial econometric model to empirically analyze the promoting effect of scientific, technological and financial development on high-quality economic development, and analyzes its promoting effect in different regions and different time periods; (3) Results: The results show that the quality of China's economic growth is spatially dependent, and the development of science, technology and finance can significantly promote the quality economic development in China. And the promotion coefficient of the central region is the largest, as well as the coefficient of the eastern region is the smallest. The promotion coefficient was small and not significant before 2015, and was significantly positive after 2015; (4) Conclusions: this paper puts forward the corresponding policy recommendations according to the research results.

This paper reports design of a 2 × 4 hybrid multimode interferometer-Mach-zehnder interferometer (MMI-MZI) configuration and compact thermo-optical switch consisting of slab waveguides on the silicon-on-insulator (SOI), platform. The device consisted of two identical MMIs as power splitters and couplers that are connected with two identical MMI-based phase shifters, and linear tapers at both ends of the MMIs to minimize the power coupling loss. A thin Al pad is used as a heating element, and a trench is created around this pad to prevent heat from spreading and to minimize loss. The calculated average thermo-optical switching power consumption, excess loss, and power imbalance are 1.4 mW, 0.9 dB, and 0.1 dB, respectively. The overall footprint of the device is 6 × 304 μm². The new heating method has advantages of compact size, ease of fabrication on SOI platform with the current CMOS technology, and offers low excess loss and power consumption as demanded by devices based on SOI technology. The device can act as two independent optical switches in one structure.

The purpose of this paper is to explore the extent to which traditional economic policies can be oriented by sound practices. It is becoming widely accepted that sustainable economic growth (and not only economic growth) is the final target of economic policies; but most economic policies are applied just looking to the short-run without taking in account the long-run perspective. Our aim will be to show how a sustainable economic policy-making would be possible, making compatible the stabilization of the economy in the short-run with a sustainable economic growth in the long-run. We confront the design of economic policies with the 17 goals of the 2030 Agenda. We argue that all sustainable development goals can be attained by the design and implementation of sustainable economic policies. Finally, to illustrate this point we will conduct a simulation exercise to show under which combinations of demand policies technological shocks would promote a path of sustainable growth. Our results will provide a reference framework for a sustainable economic policy-making.

Stemborer pests contribute to significant maize crop yield loses incurred by the smallholder famers in Ethiopia. The problem requires requires concerted effort to learn and adopt new innovations to find a long lasting solution. In this study, the on-farm implementation of the push-pull technology (PPT) was used as a platform for interaction and enhancing the social learning among the stakeholders in the maize growing Woredas of Bako Tibe, Jimma Arjo and Yayu in the Oromia region. The main stakeholders were the smallholder maize farmers, researchers and the extension staffs. The study took place between August 2014 to May 2015. The PPT is a biological based strategy addresses the stemborer pest problem in maize crop. Under the strategy, maize crop is intercropped with a stemborer moth repellent fodder legume, Desmodium (the push) together with an attractant trap plant, Napier/Brachiaria grass (the pull) planted around maize-legume intercrop. The study was implemented based on the transdisciplinary action research approach and qualitative data collected during focus group discussions, key informant interviews, stakeholder workshops, participant observations and on-farm PPT demonstrations. The findings show that, the involvement of different stakeholders in joint PPT activities in an interactive environment is an innovation in itself. It creates opportunities for the stakeholders’ empowerment as well as deliberating on the contributions from each other to overcome uncertainties about the technology and create new knowledge. The intercropping strategy of maize with Desmodium and Napier/Brachiaria is used to reintroduce the traditional mixed cropping system of smallholder agriculture as strategy for control of pests.

Self-consciousness can be considered as the internal disposition to direct attention to oneself. This dispositional tendency can be focused on private aspects of the self, but also on public characteristics of the individual. We examine self-consciousness in online consumer behavior. This concept has been poorly investigated in consumer research. The main objective of this paper is to analyze the influence of the dimensions of self-consciousness in consumer adoption of online shopping. This study is based on a sample of 725 Spanish undergraduates. Results indicated that public self-consciousness is a significant predictor of the adoption of online shopping.

Indonesia is among the countries developing the concept of smart city. The national government envisions Indonesia 2030 which shall implement the smart city towards sustainable development. Many regions in Indonesia have already implemented the concept of smart city, but still on the level of smart government and smart technology, lacking on the smart citizen component of a smart city. This paper aims to analyze the citizens behavior of using technology on Sleman smart citizen 2021 through the lapor sleman mobile application. This research uses mixed method of quantitative and qualitative approaches in examining the data. The authors distributed 100 questionares and conducted interviews to the government which is department of communication and information, Sleman and the several community that ever use the lapor sleman application. The result of the study reveals the following: firstly, performance expectancy, social influence, and behavioral intention are three independent variables which affect the users’ behavior. Secondly, the behavioral intention has the biggest significant effect on users’ behavior. Thirdly, the citizen behavior of using technology has affect the making a smart citizen. Therefore, using technology in term of lapor sleman mobile application can make the citizens as active participants in public life, in terms of social cooperation, freedom of expression and flexibility. However, there are still many problems in the use of lapor sleman mobile application such as the limited access to only android smartphones, lack of technical know-how, and people’s reluctance to use the lapor sleman mobile application.

A global revolution in information and communication technologies (ICT) has occurred over the past few decades, emerging first in industrialized countries and then in developing countries. While researchers have examined many facets of the ICT revolution, relatively little work has systematically examined the degree to which ICT has reduced natural disaster vulnerability. In this article we use cross-country data over the 1980-2013 period to estimate the relationship between newly-emerging cell phone access/use and disaster-induced fatalities. Our estimates suggest that a one-standard-deviation increase in cell phone usage reduces disaster fatalities by nearly one half. The estimated effect increases to almost three quarters for geologic events where people are typically afflicted without warning. The largest marginal benefit from cell phones in terms of saving lives come from events where there is typically no warning, thus many are caught by surprise; cell phones are used to call for help and coordinate assistance.

Big Data warehouses are a new class of databases that largely use unstructured and volatile data for analytical purpose. Examples of this kind of data sources are those coming from the Web, such as social networks and blogs, or from sensor networks, where huge amounts of data may be available only for short intervals of time. In order to manage massive data sources, a strategy must be adopted to define multidimensional schemas in presence of fast-changing situations or even undefined business requirements. In the paper, we propose a design methodology that adopts agile and automatic approaches, in order to reduce the time necessary to integrate new data sources and to include new business requirements on the fly. The data are immediately available for analyses, since the underlying architecture is based on a virtual data warehouse that does not require the importing phase. Examples of application of the methodology are presented along the paper in order to show the validity of this approach compared to a traditional one.

Transdisciplinary research approach requires that different scientists with their discipline-specific theories, concepts and methods find ways to work together with other societal players to solve a real-life problem. In order to put this into practice, Trans-disciplinary Action Research (TDR) approach was applied in this study using Push pull technology (PPT) as a boundary object. The study was conducted in Bako Tibe, Jimma arjo and Yayu Woredas (Districts) in the Oromia region of Ethiopia from August 2014 to April 2015. PPT is a biological based mechanism developed by researchers for stemborer pest control in maize. It involves inter-cropping maize with a stemborer moth-repellent silverleaf or Greenleaf Desmodium (push), and planting an attractive trap crop, Napier or Brachiaria grass (pull), around the maize crop. On farm PPT implementation was used to provide an opportunity for collaboration, interaction and learning among heterogeneous set of stakeholders comprising of researchers from Ethiopian Institute of Agricultural research and the practitioners from the ministry of agriculture and smallholder farmers/traders. The data was collected using mixed methods approach comprising of key informant interviews, Focus Group discussions, workshops, on-farm practical demonstrations and participant observations. The findings shows that; collaborative leadership provides a chance for the stakeholders to participate in the technology learning and decision making by enabling them to jointly contribute skills towards development, refinement and adaptation of PPT. In situations where there are conflicts, they are embraced and become opportunities for in-depth learning, finding solutions and adaptation rather than being sources of contradictions or misunderstandings. Leadership roles taken by farmers play a key role in terms of ability to reflect on their own practices and drawing on scientific explanations from researchers. It also enables them take lead in new technology implementation and information sharing in free and easy manner with fellow farmers and other stakeholders. Although PPT perennial nature of cropping provides opportunities for continuous stakeholder interaction and learning, it requires a personally committed leadership and formal institutional engagements for the sustainability of its activities spanning over several cropping seasons. Market forces and the involvement of private sector players also has a role to achieve this as shown from the involvement of individual farmers and traders in Desmodium and Brachiaria seed production, collection and distribution.

Experiential learning, defined as the result, source, or context of knowledge obtained from direct experience, is increasingly bolstered by technology and human-computer interaction (HCI) principles and protocols. This article will describe how technology-based human-computer interaction (HCI) has been used in experiments to enhance direct knowledge experience. In this paper, immersive technologies (such as Virtual Reality, Augmented Reality, and haptics) will be described based on cognitive learning theory, empirical research and practical experience gained from implementing cutting-edge technology and maximizing HCI principles in constructive learning. Additionally, this article will describe how AI can be used to create individualized learning environments according to a student's needs in the future. While cost, technical issues and specialised trainings are the obstacle to deliver personalized learning experiences especially to economically disadvantaged students, technological change opportunities are projected, and these technologies will take educational outcomes to the next level.

Background: Ensemble tree-based models such as Xgboost are highly prognostic in cardiovascular medicine, as measured by the Clinical Effectiveness Metric (CEM). However, their ability to handle correlated data, such as hospital-level effects, are limited. Objectives: The aim of this work is to develop a binary outcome mixed effects Xgboost (BME) model that integrates random effects at the hospital level. To ascertain how well the model handles correlated data in cardiovascular outcomes, we aims to assess its performance and compare it to fixed effects Xgboost and traditional logistic regression models. Methods: A total of 227,087 patients over 17 years of age, undergoing cardiac surgery from 42 UK hospitals between 1 Jan 2012 and 31 Mar 2019 were included. The dataset was split into two cohorts: Training/Validation (n = 157196; 2012-2016) and Holdout (n = 69891; 2017-2019). The outcome variable was 30 days mortality with hospitals considered as clustering variable. The logistic regression, mixed effects logistic regression, Xgboost and binary outcome mixed effects Xgboost (BME) were fitted to both standardized and unstandardized datasets across a range of sample sizes and the estimated prediction power metrics were compared to identify the best approach. Results: The exploratory study found high variability in hospital-related mortality across datasets, which supported the adoption of mixed effects models. Unstandardized Xgboost BME demonstrated marked improvements in predictor power over the Xgboost model at small sample size ranges, but performance differences decreased as dataset sizes increased. Generalized linear models (glm) and generalized linear mixed-effects models (glmer) models followed similar results, with Xgboost models excelling also at greater sample sizes. Conclusions: These findings suggest that integrating mixed effects into machine learning models can enhance their applicability in clinical settings where sample size is small such as rare conditions.

This study explores the impact of artificial intelligence (AI) on digital marketing strategies, emphasizing how AI technologies have transformed marketing practices. AI's ability to analyze vast amounts of data has significantly enhanced targeting and personalization, enabling marketers to deliver highly relevant and tailored content to specific consumer segments. The integration of AI in content creation has streamlined processes, improving efficiency while maintaining high standards of quality and relevance. Customer engagement has also been revolutionized through AI-driven tools such as chatbots and predictive assistance, which provide real-time, personalized support and enhance overall user satisfaction. Despite the numerous benefits, the adoption of AI in digital marketing presents challenges, including data privacy concerns, algorithmic bias, high implementation costs, and the complexity of integrating AI with existing marketing systems. The shortage of skilled professionals further complicates effective AI utilization. Looking forward, the potential for AI to drive innovation in digital marketing is substantial, with opportunities for advancements in personalization, predictive analytics, and the integration of emerging technologies like virtual and augmented reality. However, it is essential for businesses to navigate these developments carefully, addressing ethical considerations and ensuring responsible use of AI to maintain consumer trust and achieve sustained success. This study provides insights into the transformative effects of AI on digital marketing and offers a comprehensive overview of the associated benefits and challenges, highlighting the need for a balanced approach to leveraging AI technology.

The accelerated development of AI technology has brought about revolutionary changes in various fields of society. Recently, it has been emphasized that Fairness, Accountability, Transparency, Ethics (Explainability) (FATE) should be considered to support the reliability and validity of AI-based decision-making. However, in the case of autonomous driving technology, which is directly related to human life and requires real-time adaptation and response to various changes and risks in the real world, environmental adaptability must be considered in a more comprehensive and converged manner. In order to derive definitive evidence for each object in a convergent autonomous driving environment, it is necessary to transparently collect and provide various types of road environment information for driving objects and driving assistance, and to construct driving technology that is adaptable to various situations by considering all uncertainties in the real-time changing driving environment.This allows unbiased and fair results based on flexible contextual understanding, even in situations that do not conform to rules and patterns, by considering the convergent interactions and dynamic situations of various objects that are possible in a real-time road environment. The transparent, environmentally adaptive, and fairness-based outcomes provide the basis for the decision-making process and support clear interpretation and explainability of decisions. All of these processes enable autonomous vehicles to draw reliable conclusions and take responsibility for their decisions in autonomous driving situations. Therefore, this paper proposes an Adaptability, Fairness, Transparency, Explainability and Accountability (AFTEA) Framework to build a stable and reliable autonomous driving environment in dynamic situations. This paper explains the definition, role, and necessity of AFTEA in artificial intelligence technology and highlights its value when applied and integrated into autonomous driving technology. The AFTEA framework with environmental adaptability will support the establishment of a sustainable autonomous driving environment in dynamic environments, and aims to provide a direction for establishing a stable and reliable AI system that adapts to various real-world scenarios.

During tensile testing of materials, strain measurement is conducted using either contact or non-contact methods. Contact methods offer high accuracy and precision but are limited by the specimen's thickness and dimensions, whereas non-contact methods minimize damage to thin specimens and allow measurements in various environments, though they require longer prep-aration and calculation times. This paper proposes a circular grid marking pattern and a strain prediction algorithm using artificial intelligence (AI), which simplifies the preparation process and allows strain prediction without additional equipment. The circular grid pattern can be ar-ranged in various configurations from 1×5 to 5×7, and a laser marker, which requires minimal time, was used to engrave the pattern on the specimen to shorten the preparation time. The AI model, trained on image-based data, enables strain calculation regardless of the specimen's gauge length and size, and allows measurement of local strain as well as gauge-length strain. The reliability of this concept was verified by applying it to tensile testing.

Interaction with social agents employing natural language have been discussed especially since Weizenbaum (1966) observed the social effects of his chatbot named 'Eliza', which imitated a cli-ent-centered conversation. With Nass and Reeves’ media equation theory and computers as social actors paradigm, a well-tested framework has been introduced to the study of human-computer interaction. In the 1990s, there was a renewed focus on natural language analysis, which has be-come a crucial area of research in machine learning. Recent advancements in data processing and storage capacities have led to the development of AI-generated utterances that closely resemble human utterances. As a result, AI-based systems can now mimic social relationships to a signifi-cant extent. In light of these technological developments, the article explores whether quasi-social relationships should be considered within the field of social psychology and examines the poten-tial advantages and challenges of this approach.

This qualitative study explores the transformative role of digital technologies in enhancing supply chain efficiency and marketing effectiveness across diverse industries. The integration of Internet of Things (IoT), artificial intelligence (AI), blockchain, and advanced analytics has reshaped organizational practices, enabling real-time data collection, analysis, and decision-making in supply chain management (SCM) and marketing. Through semi-structured interviews with 25 professionals, including supply chain managers, marketing executives, and IT specialists, insights were gathered into the adoption, integration, and impact of digital technologies within organizational contexts. Key findings highlight IoT's contribution to enhancing supply chain visibility, predictive maintenance, and operational efficiency through continuous monitoring and data-driven insights. AI technologies support demand forecasting, inventory optimization, and personalized marketing strategies, improving customer engagement and satisfaction. Blockchain enhances supply chain transparency, traceability, and security, reducing risks associated with fraud and ensuring compliance with regulatory standards. Advanced analytics provide organizations with actionable insights into consumer behavior and market trends, guiding strategic decision-making and optimizing marketing campaigns. Despite these benefits, organizations face challenges such as technological complexity, integration issues, data privacy concerns, and organizational resistance to change. Strategic planning, leadership support, and investment in digital infrastructure are essential for overcoming these challenges and maximizing the potential of digital technologies. Future research directions include exploring sustainability initiatives in digital SCM, advancing AI-driven analytics, and understanding digital transformation in emerging markets.

This paper explores the transformative impact of computational pharmaceutics, integrating AI, multi-scale modeling, quantum computing, AI-driven drug discovery, and blockchain frameworks. Molecular dynamics simulations provide insights into atomic behaviors crucial for drug design. Quantum computing reduces computational costs for simulating protein-drug interactions. AI and Graph Neural Networks accelerate drug discovery and personalized medicine. Blockchain frameworks facilitate secure pharmacogenetic data sharing. These advancements revolutionize drug development, offering unprecedented efficiency, innovation, and personalized treatments.

This paper presents a theoretical framework aimed at improving IoT network cybersecurity by AI-driven anomaly detection in the context of rapid urbanization and the development of smart cities. The framework draws upon the Complex Adaptive Systems Theory, Theory of Planned Behavior, the Technology Acceptance Model, and the Socio-Technical Systems Theory, and intri-cately examines how AI might be integrated into the intricate ecosystem of smart cities to detect and mitigate cyber threats. It emphasizes AI-driven anomaly detection methods as pivotal in-struments that impact cybersecurity enhancement in smart city infrastructures. The proposed framework also highlights the crucial role that human-related factors, including user behavior and adoption, play in determining how effective AI applications are in enhancing cybersecurity in smart cities. It also recognizes the important moderating roles played by outside factors like legislative frameworks, environmental contexts, and technological breakthroughs in the relationship between AI-enabled anomaly detection and enhanced cybersecurity. The goal of this research is to shed light on the interactions between technology and socio-technical dynamics by offering a thorough theoretical understanding of AI's potential in smart city cybersecurity. It highlights the significance of taking into account a variety of contextual aspects when employing AI to strengthen the digital security of urban areas, and provides a strategic direction for future research and practical implementation.

The adoption of algorithms based on Artificial Intelligence (AI) has been rapidly increasing during the last years. However, some aspects of AI techniques are under heavy scrutiny. For instance, in many use cases, it is not clear whether the decisions of an algorithm are well-informed and conforming to human understanding. Having ways to address these concerns is crucial in many domains, especially whenever humans and intelligent (physical or virtual) agents must cooperate in a shared environment. In this paper, we introduce an application of an explainability method based on the creation of a Policy Graph (PG) based on discrete predicates that represent and explain a trained agent’s behaviour in a multi-agent cooperative environment. We show that from these policy graphs, policies for surrogate interpretable agents can be automatically generated. These policies can be used to measure the reliability of the explanations enabled by the PGs, through a fair behavioural comparison between the original opaque agent and the surrogate one. The contributions of this paper represent the first application of policy graphs in the context of explaining agent behaviour in collaborative multi-agent scenarios and presents experimental results that sets this kind of scenario apart from previous application in single-agent scenarios: when requiring collaborative behaviour, predicates that allow representing observations about the other agents are crucial to replicate the opaque agent’s behaviour and increase the reliability of explanations.

Due to rising cyber threats, IoT devices’ security vulnerabilities are expanding. However, these devices cannot run complicated security algorithms locally due to hardware restrictions. Data must be transferred to cloud nodes for processing, giving attackers an entry point. This research investigates distributed computing on the edge, using AI-enabled IoT devices and container orchestration tools to process data in real time at the network edge. The purpose is to identify and mitigate DDoS assaults while minimizing CPU usage to improve security. It compares typical IoT devices with and without AI-enabled chips, container orchestration, and and assesses their performance in running machine learning models with different cluster settings. The proposed architecture aims to empower IoT devices to process data locally, minimizing the reliance on cloud transmission and bolstering security in IoT environments. The results correlate with the update in the architecture. With the addition of AI-enabled IoT device and container orchestration, there is a difference of 60% between the new architecture and traditional architecture where only Raspberry Pi were being used.

The transportation sector stands out as California's primary contributor to greenhouse gas emissions, necessitating urgent action from government agencies to promote the adoption of low-carbon transportation (LCT) within the heavy-duty vehicles (HDV) and off-road equipment (ORE) sectors. This study conducts content analysis to delve into the impact of behavioral factors, specifically awareness and impression, on LCT adoption within these sectors. The analysis results are honed using a generative artificial intelligence (AI) tool. Positive associations emerge between the potential for LCT adoption and awareness, as well as factors linked to LCT (government incentives, environmental considerations). Notably, the study reveals that financial barriers and incentives hold greater significance for small-fleet organizations compared to their large-fleet counterparts. These findings offer actionable insights for government agencies to formulate targeted strategies, including mandates and incentives, tailored to the unique needs of organizations within the HDV and ORE sectors.

This paper argues that popular misrepresentation of the nature of AI has important consequences concerning how it should be regulated. Viewing AI as something that exists in itself, rather than as a set of cognitive technologies whose characteristics – physical, cognitive, and systemic – are quite different from ours (and at times from each other) leads to inefficient approaches to regulation. It limits our ability to anticipate the consequences of its foreseeable developments and social diffusion. It undermines attempts to protect ourselves from the social and political dangers it presents. After a short introduction, section 2 retraces rapidly the history of the idea that intelligence is essentially a quality, one that AI shares with human intelligence and that this resemblance trumps the differences that exist between artificial and natural cognitive systems. Section 3 reviews two approaches to the dangers of AI that reflect the illusion that AI exists in itself. Section 4 turns to the proper understanding of regulations and what is their main goal and purpose. Section 5 analyses three central characteristics of artificial cognitive systems which section six compares with corresponding characteristics of natural cognitive systems. Finally, section 7 draws some conclusions regarding how we should regulate artificial intelligence.

Modern language models are designed to generate text so realistic that it could easily be mistaken for human-authored content. Additionally, they can engage in conversations with humans in a manner that appears coherent and reasonable. The epitome of this technological advancement is ChatGPT, a model based on OpenAI's Generative Pretrained Transformer (GPT) language model. With its ability to produce high-quality content in mere seconds, ChatGPT surpasses other chatbots in terms of capabilities, drawing significant interest and excitement from both the business community and academic researchers. This study offers a comprehensive review of current research on ChatGPT, delving into its technological foundation, supportive mechanisms, and findings regarding its benefits across various fields and application areas. We evaluate and discuss the strengths and weaknesses of ChatGPT based on this review and suggest potential avenues for future research.

Blood cell analysis is a crucial diagnostic process in medical practice. In particular, detecting white blood cells (WBCs) is essential for diagnosing of many diseases. The manual screening of blood films is a time-consuming and subjective process, which can lead to inconsistencies and errors. Therefore, automated detection of blood cells can improve the accuracy and efficiency of the screening process. In this study, an explainable Vision Transformer (ViT) model was proposed for the automatic detection of WBCs from blood films. The proposed model utilizes the self-attention mechanism to extract relevant features from the input images and leverages transfer learning by incorporating pre-trained model weights to improve its performance. The proposed model achieved a classification accuracy of 99.40% for five distinct types of WBCs and exhibited potential in reducing the time required for manual screening of blood films by pathologists. Upon examination of the misclassified test samples, it was observed that incorrect predictions were correlated with the presence or absence of granules in the cell samples. To validate this observation, the dataset was divided into two classes, namely Granulocytes and Agranulocytes, and a secondary training process was conducted. The resulting ViT model trained for binary classification achieved an accuracy of 99.70%, recall of 99.54%, precision of 99.32%, and F-1 score of 99.43% during the test phase. To ensure the reliability of the ViT model's multi-class classification of WBCs, the pixel areas that the model focuses on in its predictions are visualized through the Score-CAM algorithm.

For highly time-constrained very short-term investors, reading and extracting valuable information from financial news poses significant challenges. The wide range of topics covered in these news articles further compounds the difficulties for investors. The diverse content adds complexity and uncertainty to the text, making it arduous for very short-term investors to swiftly and accurately extract valuable insights. Variations in authors, media sources, and cultural backgrounds also introduce additional complexities. Hence, performing a bull-bear semantic analysis of financial news using text mining technologies can alleviate the volume, time, and energy pressures on very short-term investors while enhancing the efficiency and accuracy of their investment decisions. This study proposes labeling bull-bear words from a futures corpus detection method that extracts valuable information from financial news, allowing investors to understand market trends quickly. Generative AI models are trained to provide real-time bull-bear advice, aiding investors in adapting to market changes and devising effective trading strategies. Experimental results show the effectiveness of various models, with Random Forest and SVMs achieving an impressive 80% accuracy rate. MLP and Deep learning models also perform well. By leveraging these models, the study reduces the time spent reading financial articles, enabling faster decision-making and increasing the likelihood of investment success. Future research can explore the application of this method in other domains and enhance model design for improved predictive capabilities and practicality.

Large Language Models (LLMs) have revolutionized the field of Artificial Intelligence with their ability to understand and generate natural language discourse. This has led to the use of LLMs in various creative fields such as music, art, and storytelling, which has sparked a debate on the impact of LLMs on human creativity. This article explores the cyclic effect of LLMs on human creativity, where LLMs can generate an ever-evolving cycle of creative output from both humans and machines. The article also highlights the importance of responsible and ethical use of LLMs, including privacy and copyright issues with the training data used by LLMs. The article emphasizes the need for transparency, data security measures, and AI governance policies to protect user data and ensure the safe use of LLMs. It also calls for the development of educational materials and resources to increase public understanding of LLMs and their ethical implications. The article concludes by highlighting the potential of LLMs as powerful tools for communication and education, but also emphasizes the need for ethical considerations to ensure the responsible and beneficial use of LLMs in society.

Over recent years, the importance of patent literature has become more recognized in the academic setting. In the context of artificial intelligence, deep learning, and data sciences, patents are relevant to not only industry but also academe and other communities. In this article, we focus on deep tomographic imaging and perform a preliminary landscape analysis of the related patent literature. Our search tool is PatSeer . Our patent bibliometric data is summarized in various figures and tables. In particular, we qualitatively analyze key deep tomographic patent literature.

In response to the need to address the safety challenges in the use of artificial intelligence (AI), this research aimed to develop a framework for a safety controlling system (SCS) to address the AI black-box mystery in the healthcare industry. The main objective was to propose safety guidelines for implementing AI black-box models to reduce the risk of potential healthcare-related incidents and accidents. The system was developed by adopting the multi-attribute value model approach (MAVT), which comprises four symmetrical parts: extracting attributes, generating weights for the attributes, developing a rating scale, and finalizing the system. On the basis of the MAVT approach, three layers of attributes were created. The first level contained 6 key dimensions, the second level included 14 attributes, and the third level comprised 78 attributes. The key first level dimensions of the SCS included safety policies, incentives for clinicians, clinician and patient training, communication and interaction, planning of actions, and control of such actions. The proposed system may provide a basis for detecting AI utilization risks, preventing incidents from occurring, and developing emergency plans for AI-related risks. This approach could also guide and control the implementation of AI systems in the healthcare industry.

Pipeline integrity is an important area of concern for the oil and gas, refining, chemical, hydrogen, carbon sequestration, and electric-power industries, due to the safety risks associated with pipeline failures. Regular monitoring, inspection, and maintenance of these facilities is therefore required for safe operation. Large standoff magnetometry (LSM) is a non-intrusive, passive magnetometer-based mea- surement technology that has shown promise in detecting defects (anomalies) in regions of elevated mechanical stresses. However, analyzing the noisy multi-sensor LSM data to clearly identify regions of anomalies is a significant challenge. This is mainly due to the high frequency of the data collection, mis-alignment between consecutive inspections and sensors, as well as the number of sensor measurements recorded. In this paper we present LSM defect identification approach based on ma- chine learning (ML). We show that this ML approach is able to successfully detect anomalous readings using a series of methods with increasing model complexity and capacity. The methods start from unsupervised learning with "point" methods and eventually increase complexity to supervised learning with sequence methods and multi-output predictions. We observe data leakage issues for some methods with randomized train/test splitting and resolve them by specific non-randomized splitting of training and validation data. We also achieve a 200x acceleration of support-vector classifier (SVC) method by porting computations from CPU to GPU leveraging the cuML RAPIDS AI library. For sequence methods, we develop a customized Convolutional Neural Network (CNN) architecture based on 1D convolutional filters to identify and characterize multiple properties of these defects. In the end, we report the scalability of the best-performing methods and compare them, for viability in field trials.

This work addresses the problem of the application of artificial intelligence to the creation and maintenance of medical documentation and the use of big data in medicine to support efficient patient diagnosis and treatment. This study covers the latest advances in AI and big data, based on literature reviews and interviews with leading experts in these fields. The following conclusions were obtained: (1) Based on the needs of patients and providers of medical services, and given the latest technological advances, all medical documentation should be digital and the processes of its creation, access, sharing, and consistency checking should by supported by suitably designed AI systems. (2) The knowledge contained in medical documentation constitutes a resource of strategic importance for humanity, with almost unlimited potential. (3) All medical documentation should be anonymised and should be made widely available, just like data and research results in the field of experimental physics. (4) This will accelerate development of new treatments, best practice and help to identify new medical emergencies, such as Covid-19. In practice today, unfortunately, the design of medical record systems is fragmented between institutions and countries, often focusing discussions on narrow technical details, and forcing clinicians to waste time on filling up multiple pages of illness history. This leads to many inefficiencies and lost opportunities and necessitates a fundamentally new approach.

Causality is the most important topic in the history of Western Science, and since the beginning of the statistical paradigm, it meaning has been reconceptualized many times. Causality entered into the realm of multi-causal and statistical scenarios some centuries ago. Despite of widespread critics, today Deep Learning and Machine Learning advances are not weakening causality but are creating a new way of finding indirect factors correlations. This process makes possible us to talk about approximate causality, as well as about a situated causality.

Background: The use of technology in paediatrics is increasing, and new health technology will change the way in which paediatric care is delivered in the future. This review is part of the Royal College of Paediatrics and Child Health Paediatrics 2040 project, which is developing a credible vision for the future of paediatrics in the UK. Aims: To summarise the impact of health technology on the delivery of paediatric care over the last ten years. To learn from existing technology use and make recommendations for future implementation. Methods: A search strategy was developed and two databases (Cochrane Library and PubMed) were systematically searched in August 2019 for relevant publications in English. Searches were limited to papers published between January 2009 and August 2019 (with further rapid review of papers published between September 2019 and November 2020). We included papers that studied young people up to the age of 24 or on those providing care for this population. A thematic synthesis of the data from the included studies was undertaken using seven domains of paediatric care. Results: 128 studies were included, grouped by domain of care. Most included studies were defined as digital (n=55) or communication (n=37). Studies looked at the different types of health technology used within different domains of care, including secondary and tertiary care (n=39), public health and prevention (n=29), and community (n=20). Studies were assessed on delivery of care outcomes using positive, negative, mixed and no effect. The most common outcomes reported were adherence and satisfaction. Discussion: This review highlights the growing importance of technology in delivering paediatric care. Six themes emerged: the importance of clear guidelines, continuity of care, confidentiality and privacy, digital poverty, using a personalised approach, and using technology to supplement rather than replace. In future, technology development should involve the end user throughout the design process.

Due to the complexity, high-risk, and conservative character of construction companies, advanced digital technologies do not become widely adopted in the short term, while vendors make determined efforts to overcome this and disseminate their technologies. This paper presents the methods of an investigation addressing the extremely complex issues related to the current practices of digital technology adoption in construction. It discusses how construction companies follow a specific logical process linked to need, project objectives, characteristics of the adopting organization, and the characteristics of the new technology to be adopted. The study aims to demonstrate a novel method of data collection and analysis including data and methodological triangulation techniques including the use of NVivo and AHP to explore how companies make the decision to uptake a new technology (e.g. advanced crane, tunnel boring machine or drones) by focusing on customer and vendor activities, their interactions, contributing factors, and people involved in the process. The major original contribution of this paper is to develop an innovative methodological Cube for investigating the Construction Technology Adoption Process (CTAP) covering technology adoption, acceptance, diffusion and implementation concepts. CTAP is a framework that delineates the phases of the process that customer organizations use when deciding to adopt a new digital technology and the parallel vendor activities. The significance of these contributions is that they enable vendors to understand how to match their strategies with customer expectations in each phase of the CTAP. It also provides a benchmark for new construction companies to use the current best practice of decision making. Future research is warranted to more clearly delineate any differences with developing nations or related industries such as mining and property management.

This study examines the factors influencing consumer adoption of on-demand social media platforms characterized by ephemeral content. As these platforms rapidly gain popularity, understanding adoption drivers is crucial for researchers and practitioners. The study develops and tests a comprehensive model integrating traditional technology acceptance factors with platform-specific constructs. Using partial least squares structural equation modelling on data from 180 social media users in Kerala, India, the research reveals that convenience is the strongest predictor of adoption intention, followed by perceived usefulness, interpersonal influence, and enjoyment. Surprisingly, factors like perceived ease of use, social influence, and platform-specific features such as ephemerality and visual focus did not significantly impact adoption directly. Age showed a marginal negative effect, while gender had no significant impact. The findings challenge some prevailing assumptions about on-demand social media adoption and highlight the need for refined models specific to this context. The study contributes to technology adoption literature by demonstrating the primacy of convenience in driving the adoption of these platforms. It also offers practical insights for developers and marketers, suggesting that prioritizing convenience and perceived usefulness in design and marketing may be more effective than emphasizing specific features. Future research directions are proposed to address limitations and further explore this evolving digital landscape.

Introductory courses regarding radar technologies are very popular in undergraduate curriculum of many electrical and electronics engineering departments. Hands-on experience is an essential part for understanding the theoretical concepts given in lectures. In most cases, it is not affordable for universities to acquire experimental radar systems, especially those in developing countries. This paper presents a detailed description of a cost-effective easy-to-deploy radar system laboratory sessions and measures the educational effectiveness of the proposed material. The provided radar models can be used in teaching undergraduate students the working principles of frequency modulated continuous wave (FMCW) radar systems, as well as assisting graduate students in their research activities. The effectiveness of the laboratory sessions is measured thoroughly via qualitative and quantitative methods based on the proposed learning process and students’ success. The results show that the lab sessions have increased the students' understanding of the topics covered within the course, and the students' general perception is positive.

PFAS are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products, in which the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years, and highly long-lasting nature, arose concern because of the possible adverse effects of PFAS on ecosystem and human health. Between the remediation technologies, adsorption has been demonstrated to be a maneageble and cost-effective method for the removal of PFAS in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on 6 different PFAS (PFOS, GenX, PFHxA, PFOA, PFDA, PFTeDA). Batch sorption tests (24 hours) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analysed by a developed and then well-established method: i) pre-treatment (centrifugation and filtration); ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). Results evidenced a comparable adsorption capacity of both materials, but greater for the long-chain PFAS. Such findings may lead to a promising path for the use of waste origin materials in the PFAS remediation field.

The application of OpenAI's advanced artificial intelligence language model, ChatGPT, in education has garnered widespread attention from the academic community. The openness and intelligence features of ChatGPT demonstrate great potential and value in supporting students' learning, daily life, and communication. This study, grounded in the theoretical frameworks of Innovation Diffusion Theory (IDT) and the Technology Acceptance Model (TAM), conducted a systematic empirical analysis through a questionnaire survey of 677 university students who had used or were currently using ChatGPT. The results indicate that the six perceived attributes of innovation significantly influence university students' behavioral intention to use ChatGPT, while attitudes towards ChatGPT, perceived usefulness, and perceived ease of use indirectly influence students' behavioral intention to continue using ChatGPT. Based on the findings of this study, we propose an extended Technology Acceptance Model (TAM) that incorporates key elements of Innovation Diffusion Theory (IDT) to optimize the application of advanced technologies, such as ChatGPT, in education, thereby improving students' learning efficiency and behavioral performance. These findings not only provide important insights into the complex relationships between college students’ perceptions of ChatdGPT technology and predictors of behavioral intentions, but can also help relevant education departments, higher education institutions, and university teachers to effectively plan and evaluate the use of ChatGPT as a learning tool.

The relentless advancement and integration of mechanization and intelligence within the coal mining industry, combined with the increasing depths of mining operations, necessitate significantly higher safety standards. This necessity arises due to the increasingly complex geological and coal seam conditions encountered as mining operations delve deeper into the earth. Traditionally, 3D seismic exploration technology has been fundamental in ensuring both operational efficiency and safety in the coal mining sector. However, despite its critical role, this technology still has limitations in detecting and characterizing small-scale geological structures which can pose substantial risks if not accurately identified and mitigated. To address these challenges, this paper introduces a sparsity-constrained adaptive hard thresholding algorithm designed to tackle the spectral inversion optimization problem with an norm constraint for the enhanced retrieval of reflection coefficients, thereby establishing a comprehensive workflow for enhancing seismic data resolution through compressed sensing spectral inversion. Real data validation has demonstrated that this method significantly enhances the resolution of seismic data while maintaining the amplitude integrity and fidelity of the original signals. This improvement allows for a more detailed and accurate characterization of small-scale geological features, which are critical in identifying and mitigating potential hazards within coal mining operations, thus offering robust support for the implementation of more effective safety protocols and disaster prevention strategies in coal mines.

This study investigates the impact of information sharing on supply chain resilience by exploring the experiences and insights of supply chain professionals through qualitative research. Information sharing has become increasingly recognized as a vital component in enhancing the ability of supply chains to anticipate, respond to, and recover from disruptions. Through semi-structured interviews with 22 supply chain professionals across various industries, the study delves into the mechanisms through which information sharing influences supply chain resilience, the challenges faced, and the role of enabling factors such as technology and organizational culture. The findings reveal that effective information sharing enhances supply chain visibility, coordination, and adaptability. Enhanced visibility allows supply chain partners to monitor real-time operational data, facilitating early detection of potential disruptions. Improved coordination enables better alignment of activities, reducing inefficiencies and mitigating the bullwhip effect. Adaptability is bolstered through the timely exchange of information, allowing for rapid adjustments to changing conditions. However, the study also identifies significant barriers to effective information sharing, including concerns about data security, competitive advantage, and trust among partners. Trust and strong relationships emerge as critical factors for successful information sharing, highlighting the need to build and maintain trust to facilitate open communication. The role of technology is emphasized, with digital platforms, blockchain, and the Internet of Things (IoT) identified as key enablers of efficient and secure information exchange. The study concludes that fostering a supportive organizational culture and leadership commitment to transparency and collaboration, along with tailoring information-sharing strategies to specific supply chain contexts, is essential for enhancing supply chain resilience. This research contributes to the understanding of the impact of information sharing on supply chain resilience and provides practical insights for organizations aiming to strengthen their resilience in an increasingly complex global business environment.

This study assesses the impact of militarization, industrialization, technological innovation, and energy consumption on CO2 emissions in NATO countries, divided into "traditional" (Group 1) and "new member" states (Group 2), using data from 1985 to 2019. It identifies heterogeneity in effects and dependencies between the groups. Employing Pedroni and Kao panel cointegration tests, a long-term equilibrium relationship among the variables is confirmed. The analysis, using panel ARDL and GMM methods, reveals distinct outcomes for each group. In Group 1, military spending and energy consumption significantly increase CO2 emissions, while industrialization and technological innovation reduce them. Conversely, in Group 2, technological innovation and energy consumption raise emissions, whereas military spending and industrialization decrease them. The findings suggest Group 1 should strategize military expenditure and energy consumption to cut emissions, whereas Group 2 should focus on eco-friendly technology and efficient energy use to achieve environmental sustainability.

The current trend in supply chain development requires the application of new knowledge to meet the challenges posed by new technologies. One such technology is blockchain, which facilitates supply chain solutions through the use of innovative data transfer, storage and verification systems. However, the use of blockchain can be challenging for certain stakeholders, such as small carriers, who may lack the necessary technical expertise or access to the technology. In this paper, we explore the potential for engaging small carriers that provide services within the blockchain supply chain but face technological barriers. We identify the barriers and opportunities for these carriers to participate, focusing on a case study of a small carrier that transports temperature-sensitive cargo. In addition, we introduce in-vehicle temperature measurement for use in cold chains and propose an ecosystem that can benefit different stakeholder groups.

Based on big data and artificial intelligence technology, the judicial big data intelligent service platform provides users with efficient and accurate legal consulting services. It has many functions such as intelligent question and answer, case analysis, and law inquiry. It also analyzes the application value of the intelligent legal consulting service platform in the field of judicial big data. By building an intelligent service platform, the rapid processing and analysis of massive judicial data has been realized, and the efficiency and quality of judicial work have been significantly improved. In addition, it emphasizes the importance of data management and quality control in the application of judicial big data, and puts forward specific measures to strengthen data management and quality control. With the continuous advancement of technology and the expansion of application fields, the platform is expected to achieve deep integration with other legal services, expand new application fields, and provide users with more comprehensive and efficient legal services. At the same time, it points out the problems that need to be paid attention to in the future development, such as data security, privacy protection and so on. Through in-depth analysis and research on judicial big data, the platform can provide strong support for judicial decision-making and promote the improvement of judicial justice and efficiency.

The fourth industrial revolution (4IR) can offer significant benefits to the construction sector, improving productivity, efficiency, collaborative efforts, and product quality while promoting safety and sustainability. However, research on the application of 4IR technologies in construction is scarce in developing countries. It is crucial to understand the ability of construction companies to adopt new technologies and identify factors influencing the success of technology implementation. In this study, a questionnaire-based survey was conducted with construction professionals to evaluate the level of technological development of the construction market in an emerging economy, assess the potential for innovation implementation, and identify factors that might influence technological development. Although respondents recognized the importance of digital transformation, the results showed that most innovations are in the early stages of implementation in the construction sector, particularly technologies that are essential for the consolidation of the 4IR. Understanding the factors underlying this reality can support the development of strategies to foster innovation and harness the advantages of the 4IR in the construction industry in developing countries.

“Dark Web” usually describes a new world of e-living space perceived as a place, free from con-straints, in which its main actors generally are criminal, unstable, and mentally disturbed individ-uals. Nowadays, advancements in information and internet technologies have made the Dark Web more accessible in recent decades. The Dark Web is a virtual world component; therefore, as-sessing users’ behavior may be crucial in understanding motivation to use it. This study aims to discuss the behavior patterns of Dark Web users within the theoretical framework of the technol-ogy acceptance model via a structural equation model. The resulting structural equation model showed that considered causal relationships were statistically significant.

Musculoskeletal disorders are a common occurrence in Europe, affecting millions of people and costing billions of euros in social security services. Traditional treatments using drugs like non-steroidal anti-inflammatory drugs (NSAIDs) can cause gastric damage, making prolonged use difficult. To address this issue, the Author has developed NegEnt Spray - Muscles and Joints, a topical medical device that uses liposomal cannabidiol and chamomile hydrolate to reduce inflammation and pain in musculoskeletal disorders. The liposomal technology used in NegEnt Spray allows for better bioavailability and a more targeted action, while chamomile hydrolate provides a natural anti-inflammatory and soothing effect. The spray is non-greasy, absorbs quickly, and can be used under any circumstances. Its pocket-sized design makes it easy to carry and use throughout the day. With NegEnt Spray, patients can alleviate discomfort and pain associated with musculoskeletal disorders without worrying about the side effects of traditional treatments.

Automated charging technologies are becoming increasingly important in the electrification of heavy road freight transport, especially in combination with autonomous driving. This study provides a comprehensive analysis of automated charging technologies for electric heavy-duty vehicles (HDVs). It encompasses the entire spectrum of feasible technologies, including static and dynamic approaches, with each charging technology evaluated for its advantages, potentials, challenges, and technology readiness level (TRL). Static conductive charging methods such as charging robots, underbody-couplers or pantographs show good potential, with pantographs being the most mature option. These technologies are progressing towards higher TRLs, with a focus on standardization and adaptability. While static wireless charging is operational for some prototype solutions, it encounters challenges related to implementation and efficiency. Dynamic conductive charging through an overhead contact line or contact rails holds promise for high-traffic HDV routes with the overhead contact line being the most developed option. Dynamic wireless charging, although facing efficiency challenges, offers potential for seamless integration into roads and minimal wear and tear. Battery swapping is emerging as a practical solution to reduce downtime for charging, with varying levels of readiness across different implementations. To facilitate large-scale deployment further standardization efforts are required. The study emphasizes the necessity for continued research and development to enhance efficiency, decrease costs, and ensure seamless integration into existing infrastructures. Technologies that achieve this best will have the highest potential to significantly contribute to the creation of an efficiently automated and environmentally friendly transport sector.

Abstract: We present a technological analysis of the architectonic complex associated with a firing structure (locally named fogón) on top of the Pirámide Mayor, the largest pyramid in Caral. This Archaic Period society flourished between ca 2,700 and 2,000 cal B.C. and was located near the Pacific Ocean on the north-central coast of present-day Peru. All approaches employed in this study demonstrated that the corridor with antechamber and duct on top of Pirámide Mayor of Caral was a sophisticated ventilation system capable of providing between 3,000 and 18,000 liters of air per minute for combustion in the attached fogón. The analysis indicates that ventilating the fogón must have been a major consideration in deciding a) the construction of the pyramid, b) locating the structure at the edge of a natural alluvial terrace, and c) orientating the pyramid towards the then contemporary prevailing winds. Results from the analysis of this fogón support practical decisions made by the builders and challenge the assumption that religion or politics were the only considerations in American pyramid building. It also indicates that a complex device, capable to delivering the considerable airflows reported in this study was within the reach of an archaic society in ancient Peru. The application of this structure to the production of a remarkably high thermal output and its implications on the knowledge of ancient Americans will be discussed in a following companion article.

To ensure consumers can purchase high-quality rice, accurate identification of rice varieties is particularly important. Methods: This article conducts research based on machine learning algorithms from the perspectives of image, spectrum, and spectrogram fusion. Six types of hyperspectral image data of rice were preprocessed using convolutional smoothing (SG) and multiple scatter correction (MSC). Texture information of the images was extracted using gray-level co-occurrence matrix. Spectra, texture, and spectrogram data were fused into a new matrix. Spectral, texture, and spectrogram fusion data were used as inputs for the model, and support vector machines (SVM), logistic regression (LR), and K-nearest neighbors (KNN) classification models were constructed and compared. Results: From the classification results, the spectrogram fusion classification performance was better than classification models using only spectra or texture. Conclusion: The research results showed that the accuracy of SVM and LR classification models exceeded 90%, and the LR model performed the best, effectively classifying rice varieties.

The quasi-experimental study examines the role of contemporary technologies, such as artificial intelligence and humanoid robots, in enhancing sustainability education for future teachers, emphasizing their impact on shaping sustainable beliefs in future generations. Involving 112 pre-service teachers, the research compares various contemporary and traditional learning methods. Pre- and post-test evaluations were conducted to assess changes in participants’ understanding of sustainability concepts and the variability of their responses. Results reveal significant improvements in sustainability awareness, with methods involving humanoid robots showing higher response variability. The study also identifies the development of new literacies crucial for effectively utilizing advanced technologies in promoting environmental sustainability. While artificial intelligence and humanoid robots match the efficacy of traditional methods, they notably engage young educators more effectively in sustainability topics. These findings highlight the need to integrate such technologies into educational framework to deepen the understanding of environmental issues and prepare youth for future challenges. However, further research is required to explore long-term effects and broader demographics. The research contributes significantly to educational technology and sustainability in education, showcasing the transformative potential of incorporating contemporary technologies in educational settings.

Wind turbines are a solution for sustainable energy, significantly reducing carbon emissions and fostering a circular economy for more cost-effective and cleaner power generation, in line with worldwide environmental aspirations. In this context, this research aims to explore a novel Two-Stage Twisted Blade micro-Vertical Axis Wind Turbine ($\mu$-VAWT) alternative inspired by the Savonius Rotor (SR). This investigation utilizes the $\kappa-\omega$ SST turbulence model to explore the power coefficient ($C_P$) and torque coefficient ($C_T$), finding $C_P$ values ranging from 0.02 to 0.04 across the turbine by altering the free stream velocity ($V$). $C_T$ analysis further delves into four specific sections, highlighting areas of particular interest. These results are validated by examining velocity contours, pressure contours, and streamlines in four horizontal sections, demonstrating that the proposed turbine model exhibits minimal torque fluctuation. Moreover, the analysis of vertical wind streamlines illustrates very low interference with various wind turbine proposals, underscoring the turbine's efficiency and potential for integration into diverse wind energy projects.

Patient access to new oncology drugs in Canada is only possible after navigating multiple sequential systemic checkpoints for national regulatory approval, health technology assessment (HTA) and collective government price negotiation. These steps delay access and prevent health care providers from being able to prescribe optimal therapy. Eighteen Canadian oncology clinicians from the medicine, nursing and pharmacy professions met to develop consensus recommendations for defining reasonable government performance standards around process and timeliness to improve Canadian cancer patients’ access to best care. A modified Delphi methodology was used to confirm strong consensus on 30 questions involving five themes: accountability, disparities, endpoints, timeliness, and cost-effectiveness. It was agreed that greater transparency is required across regulatory and HTA processes. Health professionals in oncology are frustrated for their patients because they are unable to deliver the modern guideline-supported therapies they want to provide due to delays in approval or funding. Canadian patients and their health care providers request improvements in timely access to life-saving therapeutics in line with other countries. Clinicians expect urgent improvements in our health systems to give our patients their best chance of survival.

Abstract: The use of IVF and related procedures has offered opportunities for couples to conceive who otherwise would remain childless. This technology is often viewed as the only option but is very expensive and not highly effective. ln an effort to improve access to care, governments are attempting to provide funding. In Ireland for example the Health Service Executive (HSE) has recently made IVF funding available through Regional Fertility Hubs. for couples who qualify. However, this policy has threatened a less invasive approach available in Ireland that can help many couples before IVF is employed. We propose that a newly emerging “medical treatment process” called Restorative Reproductive Medicine (RRM), combined with methods or apps that track biomarkers of the menstrual cycle as a prerequisite option for appropriate patients. To illustrate the effectiveness, we compared live birth rates from an established Irish RRM clinic that uses the ChartNeo app to HFEA (Human Fertilization and Embryology Authority) data, both from 2019. RRM treatment had a live birth rate of 40.4% compared to 24.4% per treatment cycle for IVF (P>0.0001). RRM twin pregnancy rate was 2.5% compared to 7% for IVF. RRM babies were usually full term and normal birth weight. Therefore, RRM is less expensive, less invasive, and more effective than IVF for most patients. This merits further evaluation and support by the HSE and other global authorities guiding health policy.

Consumer IoT (CIoT) manufacturers seek customer feedback to enhance their products and services, creating a smart ecosystem like a smart home. Due to security and privacy concerns, Blockchain-based federated learning (BCFL) ecosystems can let CIoT manufacturers update their Machine Learning (ML) model using end-user data. FL uses privacy-preserving ML techniques to forecast customers' needs and consumption habits, and blockchain replaces the centralised aggregator to safeguard the ecosystem. However, Blockchain technology (BCT) struggles with scalability and quick ledger expansion. In BCFL, local model generation and secure aggregation are other issues. This research contributes a novel architecture emphasising Gateway Peer (GWP) in blockchain network to resolve scalability, ledger optimisation and secure model transmission issues. In the architecture we replace the centralised aggregator by the blockchain network, while GWP restricts the number of local transactions to execute in BCN. Considering the security and privacy of FL processes, we have added differential privacy and advanced normalisation techniques to ML processes. The approaches strengthen end-users' cyber security and encourage the adoption of technological innovation standards by service providers. The proposed approach has been tested extensively using a well-respected Stanford Cars dataset. We experimentally demonstrate that the proposed architecture makes the network scalable and optimises the ledger significantly. In addition, the normalisation technique outperforms batch normalisation when features are under DP protection.

China is rich in coal resources, but the complex hydrogeological conditions lead to difficulties in coal mining, such as coal mine collapse, roof and water damage, and other accidents that occur frequently, resulting in many casualties and property losses. The use of coal mine hole detection technology to detect and analyze the internal environment of the coal mine in advance helps to reduce safety hazards and prevent coal mine accidents, for the existing coal mine hole detection technology operation is cumbersome, not easy to control, and insufficient depth of jacking prob-lems, this paper designs a new type of mine hole detection small robot. Firstly, this paper ana-lyzes the function and structural design of the mine hole detection robot, designs the variable diameter function according to the characteristics of narrow and uneven mine holes in coal mines, and analyzes the mechanics of the critical parts through theoretical calculations; secondly, based on the three-dimensional modeling software, established the structural model of the small robot for mine hole detection; after that, designed the robot's hardware circuits and control pro-grams for the presence of water and gas inside the mine hole, highlighting the need to carry out a new type of mine hole detection small robot. After that, we designed the robot's hardware circuit and control program, giving particular emphasis to the safety design of the circuit for the pres-ence of water and gas inside the mine hole of the coal mine. Finally, to verify the feasibility of the design program, the basic parameters and function tests of the mine hole detection small robot are carried out. The experimental results show that the mine hole inspection small robot realized by this design can adapt to the working hole diameter from 65 mm to 100 mm, the maximum working power is only 12 W, and the maximum crawling speed is 3.96 m/min. The maximum crawling slope reaches 90°, which can meet the actual mine hole inspection needs. The research can provide theoretical and design guidance for developing the mine hole detection robot with substantial engineering practical reference value.

The aim of this study was to evaluate the biomechanical changes of the cornea after wearing soft contact lenses (CLs) in healthy myopic patients measured with the Corvis ST® analyzer. This prospective, cross-sectional, single-center study was performed in twenty-two Caucasian patients aged between 19 and 24 years (20.64 ± 1.21 years) range). Five device-specific biomechanical parameters, central corneal thickness and intraocular pressure were measured prior to fitting and one month after CLs wear. Differences between the means of the DA Ratio and the standard deviation of the DA Ratio pre- and post-CLs wear were found to be significant (p value=0.002 in both cases). Significant differences were found between pre- and post-CLs wear values in CCT (p value=0.013). For all other biomechanical measures, no significant differences were observed before and after treatment. A significant association was found between changes in bIOP and classification according to changes in Int. Radius (p value = 0.047) and SSI (p value = 0.026) standard deviations. The corneal biomechanical indices provided by CST demonstrate that fitting of soft CLs is a safe optical compensation method for the stability of corneal stiffness. No significant differences were found pre- and post-CLs wear in the assessment of bIOP.

The main objective of this paper is to develop a readiness index model that can serve as an analytical tool for exploring the achievements of electrification of transportation systems. We have applied this readiness index model to evaluate the readiness positioning of China, Norway, and Sweden to-wards transport electrification. We have chosen these three countries as they represent diversity among countries that are in the process of adopting electric transport system solutions. Our developed readiness index model has four key dimensions, technological readiness, political readiness, societal readiness, and economic readiness. The embeddedness of all four dimensions in one model provides a multi-perspective way of analyzing and evaluating the readiness levels of countries moving towards transforming the transportation system. Therefore, we named the model a “multidimensional readiness index.” Our main conclusions are that the political processes and political decisiveness involved are the most important factors followed by the societal needs and economic ability, with the current technology available as the fourth. Without the participation of dedicated and determined political decision-makers being involved, the other three factors are challenging to obtain. Political decision-makers need to facilitate the use of economic means to support the transformation in the society and affected industries to balance the initial economic disadvantages of the electrically powered systems until they pass the cost disadvantage turning point. The development of the relevant technology is no longer a great barrier as it was at the beginning of this transformation, about 20 years ago. The technology for electrically powered transportation systems and devices is widely available now, although it is continuously evolving and being improved. Associated industries cannot be expected to initiate, finance, take the risk, and take the lead in this global societal transformation without clear and strong political support.

The results of applying drilling engineering tools in planned deviated and horizontal wells of oil and gas condensate fields have been examined. The basis for the implementation of a comprehensive approach was the information obtained from drilling horizontal wells in the West and East Siberia, Volga-Ural region, and Iraqi Kurdistan. A synthetic model is considered as an example of the data, incorporating geomechanical and geological properties. As a result of the conducted audit of the geomechanical model and drilling process, the methodologies used were further developed to obtain optimal drilling fluid densities, aiming to prevent cavity formation on well walls, hydraulic fractures, and other related issues. The implementation of the Python programming language was introduced in the stages of geomechanical model preparation, resulting in a time acceleration of up to 20%. During the pre-drilling stage, technological operations were synchronized with the geomechanical model, increasing the involvement of process participants through the synchronization of knowledge areas. The interrelation between drilling technology, drilling parameters, properties of flushing fluids, and rock stability analysis was established, ensuring a 5% increase in construction speed (through NPT reduction and modification of existing tools and technological operations) and accident-free drilling of complex deviated and horizontal wells, provided that the recommended drilling parameters are followed.

Abstract: The COVID-19 pandemic has disrupted global energy markets and caused significant socio-economic impacts worldwide. The pandemic has also impacted the energy sector, with demand for energy reducing due to lockdowns and reduced economic activity. Hence, this paper aims to provide a comprehensive and analytical review of the impact of COVID-19 on the energy sector and discuss the potential role of artificial intelligence (AI) in mitigating some of these effects. This review examines the changes in energy demand patterns resulting from the pandemic and the implications for the energy industry, including the shifts in policymaking, communication, digital technology, energy conversion, environmental, energy market, and power system operation. The analysis of the energy pattern is discussed according to the timeframes which include pre-, mid-, and post-pandemic periods. Furthermore, we explore how AI can be used to improve energy efficiency, optimize energy use, and reduce energy wastages. The potential for AI to contribute to developing more efficient and sustainable energy systems has also been addressed. Lastly, we highlighted AI’s challenges, which play a significant role in the energy sector's response to the COVID-19 pandemic. The recommendations for AI applications in the energy sector for the transition to a more sustainable energy future are outlined. Information corroborated in this review is expected to provide important guidelines for crafting future research areas and directions in preparing the energy sector for any unforeseen circumstances or pandemic-like situations.

Rabies, caused by the rabies virus (RABV), remains a significant public health issue in the Philippines despite efforts to control it. To eliminate rabies by 2030, effective surveillance strategies are crucial. In this study, we examined RABV evolution and phylodynamics in the Davao Region using genome sequences from Davao City and nearby provinces. We adapted the RABV ARTIC Protocol for Oxford Nanopore High-Throughput Sequencing to optimize workflow efficiency under limited resources. Comparing new virus samples collected from June 2019 to June 2021 (n=38) with baseline samples from June 2018 to May 2019 (n=49), new sub-clades were observed in the phylogenetic tree, suggesting divergence from older variants that were previously undetected. Most of the new viruses belonged to the Asian SEA4_A1.1.1 lineage, but new (SEA4_B1 and SEA4_B1.1) and emerging (SEA4_B1.1_E1) lineages that have never been reported in the Philippines were also identified. The baseline study reported phylogeographic clustering of RABV isolates from the same areas. However, this pattern was disrupted in the current biosurveillance, with variants detected in areas outside the original cluster. Furthermore, our findings revealed significant transmission routes between Davao City and neighboring provinces, contrasting with the predominantly intra-city transmission observed in the baseline study. These results underscore the need for ongoing and timely genomic surveillance to monitor genetic diversity changes and the emergence of novel strains, as well as to track alterations in transmission pathways. Implementing cost-effective next generation sequencing workflows will facilitate the integration of genomic surveillance into rabies control programs, particularly in resource-limited settings. Collaborations between different sectors can empower local laboratories and experts in genomic technologies and analysis.

Innovation is rapidly growing and affecting various industries, including hydrocarbon processing. This study aims to conduct a comprehensive and organized review of the literature on innovation ecosystems and their performance. It will examine existing definitions of innovation ecosystems and related concepts and identify metrics and indicators for measuring innovation and entrepreneurial ecosystems. The term "innovation ecosystem" has gained considerable attention from scholars and practitioners over the past fifteen years. Despite the proliferation of research in this area, there are concerns about its fragmented knowledge base. While previous reviews have highlighted the theoretical connections between innovation ecosystems and related concepts, there is still a need for a more comprehensive understanding of the current state of innovation ecosystem research. The study used a systematic literature review approach that combines bibliographic coupling and content analysis methods, drawing on over 100 studies to identify five streams of current innovation ecosystem research: technology innovation, platform innovation ecosystems, regional development, innovation ecosystem conceptualization and theorization, and entrepreneurship and innovation. The study's contribution lies in decoding the intellectual structure of current innovation ecosystem research and providing targeted recommendations for future research.

Due to their excellent physicochemical properties, fluorinated greenhouse gases (F-gases), including hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulfur hexafluoride (SF6), and nitrogen trifluoride (NF3), are used in a variety of applications, but they are potent greenhouse gases. Therefore, they have been blanketed into the list of phase-out under the international protocols or treaties. In this work, the updated statistics of the Taiwan’s national inventory report (NIR) were used to analyze the trends of F-gases (i.e., HFCs, PFCs, SF6 and NF3) emissions during the period of 2000-2020. Furthermore, the regulatory strategies and measures for reducing the emissions of the four F-gases will be summarized to be in accordance with the national and international regulations. With the progressive efforts by the regulatory requirements and the industry’s voluntary reduction, the total F-gases emissions indicated a significant increase from 2,462 kilotons of carbon dioxide equivalents (CO2eq) in 2000 to the peak value (i.e., 12,643 kilotons) of CO2eq in 2004, but sharply decreased from 10,284 kilotons of CO2eq in 2005 to 3,906 kilotons of CO2eq in 2020. It was also found that the most commonly used method for controlling the emissions of F-gases from the semiconductor and optoelectronic industries was based on the thermal destruction-local scrubbing technology.

This study proposes a structure for companies to use when implementing human resource practices in open innovation. Despite the fact that open innovation has received a lot of attention in the innovation management field as companies open their doors to information exchange in an effort to spur creative thinking, there are very few empirical articles that connect this trend to the human resource management literature. Our findings are the result of an extensive qualitative investigation into Julphar Gulf Pharmaceutical Industries Manufacturers in the United Arab Emirates (UAE) and its open innovation program. Internal, external, and combined are the three primary pillars of human resource management. We also demonstrate how the evolution of the open innovation initiative is linked to the state of the art in HRM and open innovation literature. The framework identifies HRM practices for both internal and external participants in the open innovation effort. Much of this HRM is done off the books, in a setting separate from the host company. By providing actual evidence of how firms use HRM to manage open innovation projects, our research adds to the scant and mostly theoretical literature linking open innovation and HRM.

Global crop yield and food security are being threatened by phytophagous insects. Innovative methods are required to increase agricultural output while reducing reliance on hazardous synthetic insecticides. It appears to be quite effective at reducing production costs and boosting farm profitability to use the ground-breaking CRISPR-Cas technology to create plants that are insect resistant. In contrast, this new technique can modify an insect's genome to either produce gene drive or get beyond an insect's tolerance to various insecticides. This paper reviews and critically discusses the use of CRISPR-Cas genome editing technology in long-term insect pest management. The emphasis of this review is on the prospective uses of the CRISPR-Cas system for insect stress management in crop production by creating genome-edited crops and insects. The potential and difficulties of using CRISPR-Cas technology to reduce pest stress in crop plants are critically examined and discussed.

Within the field of movement sensing and sound interaction research, multi-user systems have gradually gained interest as a means to facilitate an expressive non-verbal dialogue. When tied with studies grounded in psychology and choreographic theory, we consider the qualities of interaction that foster an elevated sense of social connectedness, non-contingent to occupying one’s personal space. In reflection of the newly adopted social distancing concept, we orchestrate a technological intervention, starting with interpersonal distance and sound at the core of interaction. Materialised as a set of sensory face-masks, a novel wearable system was developed and tested in the context of a live public performance from which we obtain the user’s individual perspectives and correlate this with patterns identified in the recorded data. We identify and discuss traits of the user’s behaviour that were accredited to the system’s influence and construct 4 fundamental design considerations for physically distanced sound interaction. The study concludes with essential technical reflections, accompanied by an adaptation for a pervasive sensory intervention that’s finally deployed in an open public space.

Facial expressions play a key role in interpersonal communication when it comes to negotiating our emotions and intentions, as well as interpreting those of others. Research has shown that we can connect to other people better when we exhibit signs of empathy and facial mimicry. However, the relationship between empathy and facial mimicry is still debated. Among the factors contributing to the difference in results across existing studies is the use of different instruments for measuring both empathy and facial mimicry, as well as often ignoring the differences across various demographic groups. This study first looks at the differences in empathetic abilities of people across different demographic groups based on gender, ethnicity and age. The empathetic ability is measured based on the Empathy Quotient capturing a balanced representation of both emotional and cognitive empathy. Using statistical and machine learning methods, the study then investigates the correlation between the empathetic ability and facial mimicry of subjects in response to images portraying different emotions displayed on a computer screen. Unlike the existing studies measuring facial mimicry using electromyography, this study employs a technology detecting facial expressions based on video capture and deep learning. This choice was made in the context of increased online communication during and post the COVID-19 pandemic. The results of this study confirm the previously reported difference in the empathetic ability between females and males. However, no significant difference in the empathetic ability was found across different age and ethnic groups. Furthermore, no strong correlation was found between empathy and facial reactions to faces portraying different emotions shown on a computer screen. Overall, the results of this study can be used to inform the design of online communication technologies and tools for training empathy team leaders, educators, social, and health care providers.

Seismic monitoring in areas where induced earthquakes could occur is a challenging topic for seismologists due to generally very low signal to noise ratio. Therefore, the seismological com-munity is devoting several efforts to the development of high-quality networks around the areas where fluid injection and storage and geothermal activities take place, also following the national induced seismicity monitoring guidelines. The use of advanced data-mining strategy, such as template matching filters, auto-similarity search and deep-learning approaches is recently further fostering such a monitoring enhancing the seismic catalogues and lowering the magnitude of completeness of these areas. In this framework, we carried out an experiment where a small-aperture seismic array was installed around the gas reservoir of Collalto, in North Italy. The continuous velocimetric data, acquired for 25 days, were analysed through the application of the optimized auto-similarity search technique FAST. The array was conceived as a cost-effective network, aimed at integrating, right above the gas storage site, the permanent high-resolution Collalto Seismic Network. The analysis allowed to detect micro-events down to magnitude Ml=-0.4 within a distance of ~15km from the array. Our results confirmed that the system based on the array installation and the FAST data-analysis might contribute to lower the magnitude of completeness around the site of about 0.7.

The aim of this review is to present the Quality by Design (QbD) model as a suitable methodology to perform research in the academic Costa Rican institutions that teach Pharmacy. Pubmed, Science Direct, and Google Scholar databases were screened for original and review papers, as well as short communications published not more than 10 years ago. Publications were screened by title and abstract. Relevant references were used to develop three important themes: The University’s Research Model in Costa Rica, QbD Model, and QbD as a Research Methodology for Industrial Pharmacy in the Academy. In this sense, the QbD model is a great methodology for carrying out research projects regarding Pharmaceutical Sciences but especially for Drug Development. Academic research based on this model enables training and developing practical, scientific, and leadership skills in pharmacy students. The generated knowledge can be shared in the classrooms, which represents an ideal environment to communicate their research results and to foster collaborative work between researchers, professors, and students. The participation of all these actors allows a high level of commitment to research work, which benefits the scientific advancement of the university and society. It is important to visualize the student body as potential key actors in the research process, encouraging in them the desire to become trained scientific researchers who want to pursue a career in the academy, giving continuity to it.

Numerous cases and a shortage of resources usually limit wild animal rescue. New technology implemented might save these severely injured wild animals from the situation of euthanasia by easing the requirement of intensive medication. Three-dimensional (3D) technologies provide precise and accurate results that improve the quality of the medical application. These 3D tools have become relatively low-cost and accessible in the past years. In the medical field of exotic animal, turtle shell defect is highly challenging because of inevitable water immersion. This report is the first attempt to apply the combination of 3D scanning, computer-aid design (CAD), and 3D printing to make a protective device that frees the wound from exposure to water or infection sources. The presenting techniques successfully extricate a wild freshwater turtle from an extensive shell defect within a short period. Integration of multiple sciences to 3D technology can provide a facile model for veterinary medical applications.

Abstract: Formation of DNA adducts is a key event for a genotoxic mode of action and its formation is often use as surrogate for mutation and cancer. Interest in DNA adducts are twofold, first, to demonstrate exposure, and second, to link DNA adduct location to subsequent mutations or altered gene regulation. High chemically specific mass spectrometry methods have been established for DNA adduct quantitation and elegant bio-analytic methods utilizing enzymes, various chemistries, and molecular biology methods to visualize the location of DNA adducts. Traditionally, these highly specific methods cannot be combined, and the results are incomparable. Initially developed for single-molecule DNA sequencing, nanopore-type technologies are expected to enable simultaneous quantitation and location of DNA adducts across the genome. We will briefly summarize the current methodologies for state-of-the-art quantitation of DNA adduct levels and mapping of DNA adducts and describe novel single-molecule DNA sequencing technology that is expected to achieve both measures simultaneously. Emerging technologies are expected to soon provide a comprehensive picture of the exposome and identify gene regions susceptible to DNA adduct formation.

The impact that new technologies have on all aspects of our lives, work, and businesses is significant and growing over time. Blockchain and artificial intelligence, among other innovative technologies, are having a profound effect on practically all business functions, including most human resources (HR) tasks. The HR sector is currently facing a variety of challenges as HR departments invest many hours in vetting candidates' applications and authenticating records to decrease the chances of imperfect recruiting. Nowadays, more technologically based processes are utilised for talent search, selection and management, as well as for accumulating, retaining, and integrating new talents into a company. These HR practices are far more effective compared to traditional methods but can also be more expensive if the transactional costs are considered. This paper consists of two parts. Following an introduction, the first part discusses the trust and confidentiality that can be attained, while the second part examines security, fraud prevention and the productivity gained from using blockchain technology in HR activities. Finally, there is a concluding section, discussing the implications of blockchain technology for firms who choose to employ it.

Being a combination of the conference call, talkback radio, audio podcast, and an online video chat, Clubhouse is a new social networking app that gained over 10 million users and over $100 in valuation in just 8 months. Unlike other social networks, it offers a real-time streaming audio chat that does not ask users to share any unnecessary information like exchanging text messages, conducting video calls, or sharing photos. Instead, Clubhouse users can listen to real-time conversations, contribute to these conversations and create their own conversations for the others to listen and to interact with. Often nicknamed a “Silicon Valley’s hottest start-up”, Clubhouse positions itself as an “exclusive” and “alternative” social network that attracts various celebrities and people who just want to talk to each other. Launched in March 2020, amidst the COVID-19 pandemic with its social distancing and lockdowns, Clubhouse offered its users a space for the digital group psychotherapy where people could solve their problems by talking them through with strangers. However, it is unclear what is going to happen to this new social network in the post-pandemic world after all of its hype eventually evaporates. This paper discusses the possible underlying motives for the Clubhouse creation and its real purposes. Moreover, it looks at the three possible scenarios of its further development.

The objective of this research is to measure the perception that teachers had about their own performance when they were forced to carry out an Emergency Remote Teaching due to the COVID-19 pandemic. A questionnaire was provided to teachers of every educational stage in the Basque Country (Pre-school, Primary and Secondary Education, Professional Training and Higher Education) obtaining a total of 4,586 responses. The statistical analysis of the data shows that the greatest difficulties reported by educators are shortcomings in their training in digital skills, which has made them perceive more workload during the lockdown and negative emotions. Another finding is the existing digital divide between teachers based on their gender, age and type of school. A further worrying result is the lower technological competence in lower educational levels, which are the most vulnerable in remote teaching. These results invite us to reflect on the measures to be taken to improve equity, social justice and resilience of the educational system, which align with some of the Sustainable Development Goals.

This paper considers a new approach to the modeling of the vacuum infusion process at the manufacturing three-dimensional composite parts of complex shape. The developed approach and numerical methods are focused on the reliable prediction with the needed accuracy and elimination the unrecoverable defect of composite structure such as the dry spots. The paper presents some experimental results, which demonstrate two cases of dry spots formation in large aircraft composite panels, and analyses the reasons of these defects arising. Our numerical technique is based on the vacuum infusion of the liquid resin into porous preform as the two phase flow, which is described by the phase field equation coupled with the Richards equation describing the fluid motion in unsaturated soils with spatially varied pressure dependant porosity and saturation. This problem statement allowed to correctly reconstruct the resin front motion and formation of inner and outer dry spots depending on its movement. For the rapid detection of preform zones that are suspicious for defect formation two indicators calculated during process simulation are proposed and tested at the numerical experiments. The auxiliary program tool has been developed in MATLAB environment to correctly detect the times of formation, localization and dimensions of the arising dry spots by using the results of the finite element model simulation.

A growing number of households benefit from the government subsidies to install renewable generation facilities such as PV panels, used to gain independence from the grid and provide cheap energy. In the Romanian electricity market, these prosumers can sell their generation surplus only at regulated prices, back to the grid. A way to increase the number of prosumers is to allow them to make higher profit by selling this surplus back into the local network. This would also be an advantage for the consumers, who could pay less for electricity exempt from network tariffs and benefitting from lower prices resulting from the competition between prosumers. One way of enabling this type of trade is to use peer-to-peer contracts traded in local markets, run at microgrid (μG) level. This paper presents a new trading platform based on smart peer-to-peer (P2P) contracts for prosumers energy surplus trading in a real local microgrid. Several trading scenarios are proposed, which give the possibility to perform trading based on participants’ locations, instantaneous active power demand, maximum daily energy demand and the principle of first come first served implemented in an anonymous blockchain trading ledger. The developed scheme is tested on a low-voltage (LV) microgrid model to check its feasibility of deployment in a real network. A comparative analysis between the proposed scenarios, regarding traded quatities and financial benefits is performed.

In the paper, the author takes stock of the conceptual reflection and empirical studies described in the current scientific literature on responsible innovation in the context of the emergence of Responsible Research and Innovation (RRI) concept. RRI has been promoted in the European Union as a part of the Europe 2020 strategy with the objective of making research and innovation more sustainable and inclusive. As more than half of the EU’s firms declare conducting innovation activities RRI problematic becomes more relevant than ever. There remain many open questions, unresolved dilemmas and empirical white spots that call for more research in this field. This paper’s main focus is the problem of RRI acceptance as a global framework for responsible innovation and the scarcity of suitable instruments that may help industry understand and adopt this concept. The main contribution of this paper are: the critical analysis of the RRI concept and its implications for industry, proposing a concept of RRI index for innovating enterprises.

The purpose of feature selection is to find important features from the original high-dimensional space. As atypical feature selection algorithm, Locally linear embedding(LLE)-based feature selection algorithm, which applies the idea of LLE to the graph-preserving feature selection framework, has been received wide attention. However, LLE-based feature selection framework is sensitive to noise and K-nearest neighbors. To address these problems, an improved LLE-based feature selection algorithm, robust LLE (RLLE) vote, is proposed. In this algorithm, $l_1$ and $l_2$ regularization are introduced into the high-dimensional reconstruction model of LLE. Furthermore, RLLE vote also proposes a criterion to measure the difference between the reconstruction features and the original features, and then the importance features can be selected by this criteria. Extensive experiments are carried out on a benchmark fault data set and the bearing data set collected from our own laboratory, and the experimental results demonstrate that RLLE vote achieves the most significant performance compared existing state-of-art methods.

The prevalence of autism in children in the world is estimated as one per 62 children, higher levels reported in some countries. These children experience significant problems with the development of social, behavioural and verbal and non-verbal communication skills. The skills impairment levels varies from an individual to another and that made teaching autistics a challenge for caregivers such as teachers and relatives. Hence, there are quite a number of frameworks of a software learning systems which focus on gaining the children’s attention using representational visual illustration as a learning method instead of the textual form. However, majority of these tools are lacking the personalisation ability to suite everyone in the spectrum. Assistive technology offers an alternative way to attract children with autism. Therefore, this research is proposing an Adaptive Content Management Learning System (ACMLS) model to assist caregivers to produce, design and fine-tune or customise the learning materials appropriately so that the system interface and the materials are suitable for every individual in the spectrum according to each child personal profile aiming to make learning attractive and to contribute in improving their social, communication and behavioural skills and nonetheless, their attention level to the delivered educational topics. The ACMLS model design adopts four main components which are: (1) Design component: which covers the visual design, design principles and the mental model of the children with autism. (2) Technology component: which covers the assistive technology tools and the architecture of the ACMLS system. (3) Education component: Which covers the learning objectives, styles, strategies, methods and the cognitive model. (4) Participants component: which covers the main participants who’re playing a role in the ACMLS model such as: caregivers and children with autism.

Polydimethylsiloxane with hydroxy groups was functionalized to form functionalized polydimethylsiloxane, which subsequently underwent an addition reaction with isophorone diisocyanate to form the prepolymer. Next, 3-aminopropyltriethoxysilane (APTS) reacted with 3-glycidoxypropyltrimethoxysilane (GPTS) to produce bridged polysilsesquioxanes, and the sol–gel technology was employed to form hyperbranched polysiloxane nanoparticles with hydroxy groups, which was used as the additive. The hyperbranched polysiloxane and the prepolymer containing NCO functional groups then underwent an addition reaction to produce the hybrid materials. Fourier-transform infrared spectroscopy and 29Si nuclear magnetic resonance were used to characterize the structure of the polyurethane hybrid. Regarding thermal stability, after the hyperbranched polysiloxane nanoparticles was introduced, the integral procedural decomposition temperature increased from 348 ºC for polyurethane matrix to 859 ºC for the hybrid material. The results revealed that the thermal stability of the hybrid material substantially increased by approximately 247%.

A novel drive current model covering the effects of source/drain voltage (VDS) and gate voltage (VGS) and incorporating drift and diffusion current on the surface channel at the nano-node level, especially beyond 28nm node is presented. The effect of the diffusion current added is more satisfactory to describe the behavior of the drive current in nano-node MOSFETs, fabricated with the atomic-layer-deposition (ALD) technology. This breakthrough in model establishment can expose the long and short channel devices together. Introducing the variables of VDS and VGS, the mixed current model more effectively and meaningfully demonstrates the drive current of MOSFETs under the operation of horizontal, vertical, or mixed electrical field. In comparison between the simulation and experimental consequences, the electrical performance is impressive. The error between both is less than 1%, better than the empirical adjustment to issue a set of drive current models.

The American Academy of Arts and Sciences suggested the definition of science literacy emphasize how crucial understanding the scientific process and the ability to evaluate conflicting scientific evidence is. The purpose of this article is to present an evidence-supported curriculum covering the fundamentals of logic, reasoning, and argumentation skills to address the emphasized basic knowledge, skills, and abilities required to be scientifically literate, which will prepare the public to understand and engage with science meaningfully. An analytic-synthetic approach toward understanding the notion of public is taken using a theoretical biomimetics framework that identifies naturally occurring objects or phenomena that descriptively captures the essence of a construct to facilitate creative problem-solving. In the present case, the problem being solved is how to reconcile what is meant by public, how it ought to be interpreted, the different levels of confidence in science that exist, and various understandings of science all with one another. The results demonstrate there is an inherent denotative-connotative inconsistency in the traditional notion of public that can be explicated through the concept of a fractal allowing for comprehension of the relationship between public confidence in, and understanding of, science.

A lightweight composite bridge deck system composed of steel orthotropic deck stiffened with thin Ultra-High Performance Concrete (UHPC) layer is developed to eliminate fatigue cracks in orthotropic steel decks. During the construction and operation period of the bridge, the debonding between the steel deck and the UHPC layer may introduce the several issues, such as crack-induced water invasion and distinct reduction of the shear resistance. In the study, an effective and novel non-destructive interface condition monitoring approach using piezoelectric lead zirconate titanate (PZT)-based technologies is proposed to detect interfacial delamination between steel deck and UHPC layer. Experimental tests are performed on several steel-UHPC composite slabs and a conventional steel-concrete composite slab. The thin styrofoam sheets with different sizes and thicknesses are set on different locations of the steel deck as the artificial debondings. The PZT ceramic patches are bonded on the surfaces of the steel deck and UHPC layer as the actuators/sensors. An improved PSO (Particle Swarm Optimization)-K-means clustering algorithms is proposed to obtain the debonding patterns based on the feature data set. The laboratory tests demonstrate that the proposed approach provides an effective and accurate way to detect interfacial debonding of steel-UHPC composite slab.

One purported benefit of technology is that it gives humans greater control over how they live their lives. Various technologies are used to protect humans from what are perceived to be the capricious whims of indifferent natural forces. Additionally, technology is used to create circumstances and opportunities that are believed to be preferable because they are more subject to human control. In large measure, the lives of late moderns are effectively constructed and asserted as artifacts of what they will themselves to be. This control is seen prominently at the beginning and end of life. Technology is employed to overcome infertility, prevent illness, disability, and undesirable traits, to select desirable traits and increasingly enhance them. At the end of life, late moderns have a far greater range of options at their disposal than past generations: they can choose to delay death, control pain, or end their lives at the time and with the means of their choosing. The greater control that technology offers helps humans to survive and even flourish, but it comes at a price. One such cost is that it tends to reduce humans to being little more than a will confined within a body. The body is thereby effectively perceived to be an impediment to the will that should be overcome. Is this troubling? Yes. I argue that the purported control technology offers often serves as a distraction or blind spot that may prevent humans from understanding and consenting to their good. In making this argument I draw upon the Christian doctrine of the incarnation as a way of disclosing the creaturely good of finitude against which the will should conform rather than attempting to overcome. I also draw upon Iris Murdoch’s and Simone Weil’s concept of “unselfing” as a way of conforming the will with this good. I revisit issues related to the beginning and end of life to draw-out some of the implications of my argument.

Sulfate, the main dissolved contaminant in acid mine drainage (AMD), is ubiquitous in watersheds affected by coal and metal mining operations worldwide. Engineered passive bioremediation systems (PBS) are low-cost technologies that remediate sulfate contamination by promoting (1) precipitation of sulfate-bearing compounds, such as schwertmannite and gypsum; and (2) microbially-mediated sulfate reduction (BSR) to sulfide with subsequent precipitation of sulfide minerals. In this study, chemical and sulfur isotopic data are used to infer multiple pathways for sulfate sequestration in the Tab-Simco PBS. By simultaneously monitoring sulfate concentrations and δ34SSO4 values at four sampling points across the PBS, we (1) identified that the organic layer within the bioreactor was the primary site of BSR processes contributing to sulfate sequestration; (2) observed seasonal variations of BSR processes; (3) estimated that initially the BSR processes contributed up to 30% to sulfate sequestration in the Tab-Simco bioreactor; and (4) determined that BSR contribution to sulfate sequestration continuously declined over the PBS operational lifetime. Together, our results highlight the utility of combining geochemical and microbial fingerprinting techniques to decipher complementary processes involved in sulfur cycling in a PBS as well as the value of adding the sulfur isotope approach as an essential tool to help understand, predict, prevent and mitigate sulfate contamination in AMD-impacted systems.

We study a two-echelon supply chain made up of a supplier and a manufacturer, both of which can reduce their component/product carbon emissions. With the vertical technology spillovers, we explore the optimal decisions of centralized and decentralized supply chains with price dependent demand and propose coordination strategy for the decentralized supply chain. Considering the cost contraction effectiveness of the technology spillovers, the centralized and decentralized game theoretic models of a two-echelon supply chain are developed to investigate optimal decisions of pricing and carbon emissions reduction. Through a systematic comparison and numerical analysis, we show that the profits of both players and the entire supply chain improve with the effect of technology spillovers increasing. Carbon emissions reduction will be taken by various protective measures so that the supplier and the manufacturer who do not innovate can hardly share the results of innovating via the “free-riding” methods when the technology spillover is relatively small. We also propose a revenue-cost sharing contract through bargaining to enhance the performance of the decentralized supply chain.

This study examines the feasibility and efficacy of utilizing generative AI technology to create inclusive online dating educational materials, focusing on integrating easy-to-read principles to enhance accessibility while improving efficiency and reducing the cost of material production. As online dating becomes increasingly prevalent, providing easily comprehensible safety education for special populations, such as individuals with disabilities and adolescents, is of paramount importance. This research developed an innovative AI-generated educational framework that combines easy-to-read principles with generative AI technology, aiming to enhance both the accessibility and production efficiency of educational materials. The study compared three AI generation strategies: independent generation by ChatGPT, independent generation by Claude, and Claude utilizing materials generated by ChatGPT. We evaluated 36 educational units through a mixed-methods approach for readability and accessibility. Results indicate that ChatGPT performed optimally in generating easily readable content (average compliance rate of 93.00%), followed by the strategy Claude using ChatGPT-generated materials (91.67%). Statistical analysis revealed significant differences among these strategies (p < 0.05). The research also found that employing AI generation technology significantly reduced material production time and costs, providing educators with a more efficient tool. The findings of this study underscore the significant potential of generative AI technology in creating inclusive educational resources. This not only opens up new avenues for enhancing online safety awareness and educational accessibility for special populations but also provides material developers with more efficient, cost-effective production methods. The empirical evidence presented here for the application of AI in inclusive education is a significant step forward. The study also proposes recommendations for future research and practice, aiming to further improve the accessibility, effectiveness, and production efficiency of online dating education.

The rapid advancement of artificial intelligence (AI) brought about significant opportunities and challenges in educational environment. It is disputable whether the application of AI to education is beneficial or not regarding human learning and teaching. This study aims at exploring the implications of the evolving educational landscape by comparing and discussing human and AI learning processes. Even though AI is not a conscient agent, it does not spell out any words randomly but provide meaningful texts with any reasoning. It helps us to understand human learning better by comparing learning in biological and artificial intelligences. Moreover, the new concepts in learning in AI come about the change of learning paradigm such as connectionism/connectivism. After all, AI will empower the abilities of learning and teaching for students as well as teachers. This study will give some implications for the future education with AI.

Human-elephant conflict has become a conservation challenge in Asia and Africa resulting in considerable human fatalities annually. We deployed an AI-embedded camera-alert system in a conflict hotspot in West Bengal, India to determine if AI algorithms could accurately detect elephants and if real-time alerts that triggered a rapid response could prevent serious incidents. The system successfully detected elephants near villages (266 events) and transmitted real-time alerts (x̄ = 42 seconds) permitting quick response by field personnel to prevent conflict (x̄ = 18.2, SD = 12.4 min to arrival). Matriarch herds of elephants were detected mostly at night when human traffic was minimal; lone adult bulls, the class most prone to conflict, were detected day and night. Frequent detections of humans (33,217 events) on routes used by elephants highlighted the value of real-time monitoring especially during daytime. Twelve human fatalities and eighteen serious injuries occurred in the study area between 2019-2023 but none during deployment of the AI system, supporting the hypothesis that alerts integrated with rapid response can reduce conflict. Loss of lives and livelihoods underscore the urgency of applying this approach to other elephant ranges and adapting AI models to conflict-prone species to provide early warning and promote coexistence.

This study explores the impact of artificial intelligence (AI) on financial inclusion satisfaction and recommendation, focusing on ethical dimensions and perceived algorithmic fairness. From the perspectives of organizational justice theory and the heuristic-systematic model, we examine how constructs of algorithm transparency, algorithm accountability, and algorithm legitimacy influence users' perceptions of fairness, and subsequently, their satisfaction with and recommendation of AI-driven financial inclusion. Through a survey-based quantitative analysis, our results indicate that perceived algorithmic fairness acts as a mediating factor between the ethical attributes of AI systems and user satisfaction as well as their recommendation. Findings reveal that higher levels of transparency, accountability, and legitimacy enhance customers' perceptions of fairness, which in turn significantly increases both their satisfaction with financial inclusion services facilitated by AI and their likelihood to recommend them. This research not only contributes to the literature on AI ethics by highlighting the critical role of transparent, accountable, and legitimate AI practices in fostering satisfaction and recommendation among users, but also fills a significant gap in understanding the ethical implications of AI in financial inclusion contexts.

Estimating the ocean’s subsurface thermohaline information from satellite measurements is essential for understanding ocean dynamics and El Niño phenomenon. This paper proposes an improved double-output Residual Neural Network (DO-ResNet) model to concurrently estimate the ocean subsurface temperature (OST) and ocean subsurface salinity (OSS) in the tropical Western Pacific using multi-source remote sensing data, including sea surface temperature (SST), sea surface salinity (SSS), sea surface height anomaly(SSHA), sea surface wind (SSW), and geographical information (including longitude (LON) and latitude (LAT)). In the model experiment, Argo data were used to train and validate the model, and the root mean square error (RMSE), normalized root mean square error (NRMSE) and coefficient of determination (R²) were employed to evaluate the model's performance. The results showed that the sea surface parameters selected in this study have a positive effect on the estimation process, and the average RMSE and R² values for estimating OST (OSS) by the proposed model are 0.34 °C (0.05 psu) and 0.91 (0.95), respectively. Under the data conditions considered in this study, DO-ResNet demonstrates superior performance relative to the extreme gradient boosting model, random forest model, and artificial neural network model. Additionally, this study evaluates the model’s accuracy by comparing its estimations of OST and OSS across different depths with Argo-derived data, demonstrating the model's ability to effectively capture the most spatial features, and by comparing NRMSE across different depths and seasons, the model displays strong seasonal adaptability. In conclusion, this research introduces a novel artificial intelligence technique for estimating OST and OSS in the tropical Western Pacific Ocean.

Conversational artificial intelligence (AI) has shown strong capabilities in providing low-cost and timely interventions for a wide range of people and increasing well-being. Therefore, this study examined ChatGPT’s efficacy in conducting psychological counseling and its potential for providing accessible psychological interventions, especially in school settings. This study assessed the strengths and limitations of AI to inform future research. Data were generated from ChatGPT’s responses to 80 counseling questions that college students asked during a school counseling setting. All the responses generated during these simulated counseling sessions were then analyzed using three primary metrics—warmth, empathy, and acceptance—following APA guidelines. The analysis adopted several natural language processing methodologies for emotion detection and empathy measurement to quantify ChatGPT’s high efficacy in presenting the appropriate emotions and reactions for counseling. Some responses demonstrated randomness, which is crucial for consideration regarding the use of ChatGPT or relevant technology in psychological counseling. The Discussion section also highlights future directions in the application of conversational AI to enhance students’ mental health.

Given the widespread use of AI language models such as ChatGPT, there is an urgent need 1 to understand their political biases in different languages. This study aims to uncover such biases. To 2 investigate this issue, we applied IDRLabs’ Political Coordinates Test to ChatGPT based on GPT-4 3 in four languages - English, French, German, and Italian. The results confirm previous studies that 4 identified a left-libertarian bias in ChatGPT. There was remarkable consistency in political orientation 5 across all four languages, although minor variations were found. Differences in ChatGPT response 6 distributions across languages could indicate culturally determined differences in interpretation 7 of political questions. The results highlight the need to diversify and optimize data collection and 8 model training methods to ensure greater fairness and neutrality and minimize the influence of bias. 9 Our study highlights the importance of cultural differences in the processing and interpretation of 10 political information by AI models.

In this work, we explore the ability to dynamically group the Wind Turbine (WT) of a Wind Farm (WF) based on the behaviour of some of their Supervisory Control And Data Acquisition (SCADA) signals to detect the turbines that exhibit abnormal behaviour. We centre this study on a small WF of five WTs. We use the fact that the same signals from different turbines in the same WF coherently evolve temporally in a time domain, describing very similar waveforms. In this contribution, we use averaged signals from the SCADA system and omit maximums, minimums and standard deviations, focusing mainly on velocities and other slowly varying signals. For the temporal analysis, sliding windows of different temporal durations and overlapings are explored. The capability to automatically identify WTs whose signals differ from the group’s behaviour can alert and program preventive maintenance operations on such WTs before a major breakdown occurs.

The dynamic landscape of AI adoption and its impact on employment in Malaysia demands a multifaceted approach to navigate the challenges and harness the opportunities presented. While the government's commitment to fostering AI adoption through initiatives like the National AI Framework and the Malaysia Digital Economy Blueprint is commendable, it is imperative to address concerns regarding job displacement and ensure inclusive growth. This study identifies the pressing research problem of workforce readiness for the AI-driven future, emphasizing the need to explore strategies for reskilling and upskilling affected workers. By employing critical lenses such as Marxist, feminist, and postcolonial perspectives, scholars highlight the power dynamics and societal implications inherent in AI deployment, guiding the development of policies and interventions that prioritize workers' interests and address social inequalities. Moving forward, a comprehensive approach combining policy interventions, educational reforms, and inclusive strategies is essential to maximize the benefits of AI adoption while mitigating its potential risks. Longitudinal studies, interdisciplinary research, and comparative analyses will further advance our understanding and inform evidence-based policymaking in this evolving field. Ultimately, by prioritizing workforce preparedness, social equity, and sustainable development, Malaysia can position itself as a leader in the AI-driven global economy, fostering a resilient, inclusive, and prosperous society for all.