Nipa palm is a plant of great value to communities due to its social, environmental, and economic benefits. Effective management of the supply chain for products derived from nipa palm resources is essential to provide communities with suitable channels for selling each type of product. This study aims to map the supply chain structure of six different nipa palm products. Data were collected through semi-structured interviews with 100 households engaged in nipa palm cultivation. The analysis focused on the characteristics of the products, existing challenges, and the current supply chain dynamics. The findings revealed that among the six products, palm sugar had the highest production volume. The most significant challenges identified were related to labor shortages and limited marketing channels. To achieve sustainable supply chain management, it is crucial to maintain a balance between supply and demand. The study recommends exploring appropriate marketing channels for each product, with particular emphasis on online platforms that allow communities to sell directly to consumers.

Keywords: Urban Heritage, Resilience, Urban Planning, Climate change, Urban Development, Sustainable Urban Development

The potential of both plasma and nanotechnology in the production of slow-release fertilizers is immense. These technologies, when combined, may offer green and cheap nitrogen fertilizers, from rich renewable resources available in local areas. Together these technologies may overcome some limitations of conventional synthetic fertilizers which currently are expensive and associated with low nitrogen use efficiency and significant environmental concerns. This review explores how recent advances in plasma and nanotechnology together might be leveraged to formulate new slow-release nitrogen fertilizers. While no attempt has been made so far to produce slow-release nano fertilizers from low-cost liquid nitrate generated by emission-free non-thermal plasma, plasma nitrate has already been reported as effective as a conventional fertilizer for crop production. We propose a more efficient electrocatalytic conversion of plasma nitrate to ammonium salt, followed by coating using plant-based cellulose nanoparticles into a slow-release form. This would synchronize nutrient release with the dynamic N requirements of plants. Formulations using agro-based low-cost cellulose nanomaterials might then replace high-cost carrier hydrogels associated with low mechanical strength. The review also highlights the isolation of nanocellulose from various plant materials and its characterization for use in different formulations of slow-release nano plasma N fertilizer. Additionally, we discuss mechanisms of N loss, slow-release, and retention in the soil. The knowledge from this review has potential to contribute to the production and use of efficient, sustainable fertilizers, to improving food security and, consequently the health of our planet.

While various studies have explored the integration of sustainability in the construction sector of Tanzania, particularly in areas like energy efficiency and green building practices, there remains a significant gap in understanding the specific barriers to the selection of sustainable building materials (SBMs) in residential projects. This research intends to bridge this gap by identifying and analyzing the critical barriers that hinder the effective selection of SBMs in Tanzania's residential building projects. By employing qualitative interviews with experts from regulatory bodies, public developers, and academic researchers, the study provides a comprehensive overview of the barriers. To ensure the collection of relevant and insightful data, the study involved the selection of participants based on specific criteria tailored to each category of experts. To be able to analyze qualitatively the data collected, this study employed Atlas.ti and MS Excel software. The findings revealed six categories of critical barriers affecting the selection of SBMs for residential building projects in Tanzania were identified and analyzed: (1) Regulatory and Policy Barriers (2) Financial Barriers (3) Knowledge and Awareness Barriers (4) Technical Barriers (5) Market and Supply Chain Issues (6) Cultural and Social Barriers. Moreover, the lack of awareness and limited knowledge issue were as equally importantly voiced as regulatory and policy barriers to affect the effective selection of sustainable materials in Tanzania. This study underscores the need for targeted policy interventions that address the lack of awareness, financial difficulties, and the absence of comprehensive regulatory frameworks to promote the selection of sustainable materials.

Aluminium dross is the industrial waste from aluminium refining industry and accordance with toxic waste materials, it’s also recognized as a by-product of aluminium production, has historically posed significant environmental challenges due to its toxic and reactive nature. However, recent advancements in technology have revealed the potential of transforming aluminium dross into a valuable source of white hydrogen. This review paper explores the methodologies, benefits, and challenges associated with this transformation. By analysing current research and industrial practices, our review highlighted the potential of this innovative approach to mitigate waste and contribute to sustainable energy solutions. In addition, the utilization of Aluminium dross can be considered as innovative and advancement in sustainable waste management strategy instead of direct disposal, and hot springs use advances in direct utilization. Our experimental work achieved white hydrogen maximum flowrate at 600 sec. with 120ºC.

This review investigates the pivotal challenge of recycling material waste in the context of Additive Manufacturing with an emphasis on decentralized 3D printing, shedding light on its environmental and economic implications. With additive manufacturing experiencing exponential growth, the environmental impacts of waste generation during 3D printing processes have become increasingly significant. The paper explores various recycled materials commonly used in 3D printing, including polymers like polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate glycol (PETG), evaluating their characteristics and usability. General recycling methodologies, encompassing mechanical and chemical processes, are examined with attention to challenges such as polymer sorting, additives, coatings, contamination, and thermoset reprocessing. The economic and societal impact of integrating recycled materials into 3D printing and the environmental impacts are examined. By identifying research gaps and proposing future trends, this review contributes to a deeper understanding of how recycling can play a pivotal role in achieving environmental sustainability and economic viability within the decentralized 3D printing landscape.

Grain trade plays a pivotal role in international trade, serving not only as a primary component of the global agricultural market but also as a crucial factor in ensuring global food security and price stability. This study utilizes panel data from Russia, one of the largest players in the grain market, to investigate the determinants of cereal exports. The results of the gravity model estimation reveal a positive impact of demand factors, population differences, and the level of economic openness of importing countries, while distance and tariffs exert a negative influence on exports. The findings also indicate that Russia possesses significant untapped potential for cereal export growth, which has only increased in the context of geopolitical instability. The paper identifies regions with potential for export expansion and outlines the conditions necessary for realizing this potential. The results of this study contribute to the development of evidence-based policies aimed at enhancing the sustainability of regional export flows in global systems.

The microbial communities are closely related to the overall health and quality of soil, but studies on microbial ecology in apple-pear orchard soils are limited. In the current study, 28 soil samples were collected from three apple-pear orchards in northeastern China, and the composition and structure of fungal and bacterial communities were investigated by high-throughput sequencing. Molecular ecological network showed that the keystone taxa of bacterial communities were Actinobacteria, Proteobacteria, Gemmatimonadetes, Acidobacteria, Nitrospirae, and Chloroflexi, and the keystone taxa of fungal communities was Ascomycota. Mantel tests showed that soil texture and pH were important factors shaping soil bacterial and fungal communities, and soil water soluble organic carbon (WSOC) and nitrate nitrogen (NO3--N) were also closely related to soil bacterial communities. Canonical correspondence analysis (CCA) and variation partition analysis (VPA) analysis revealed that geographic distance, soil texture, pH, and other soil properties could explain 10.55%, 13.5%, and 19.03% of the overall variation of bacterial communities, and they explained 11.61%, 13.03%, and 20.26% of the overall variation of fungal communities, respectively. The key stone taxa of bacterial and fungal communities in apple-pear orchard soils and their strong correlation with soil properties could provide useful clues toward sustainable management of orchards.

The accelerated development of AI technology has brought about revolutionary changes in various fields of society. Recently, it has been emphasized that Fairness, Accountability, Transparency, Ethics (Explainability) (FATE) should be considered to support the reliability and validity of AI-based decision-making. However, in the case of autonomous driving technology, which is directly related to human life and requires real-time adaptation and response to various changes and risks in the real world, environmental adaptability must be considered in a more comprehensive and converged manner. In order to derive definitive evidence for each object in a convergent autonomous driving environment, it is necessary to transparently collect and provide various types of road environment information for driving objects and driving assistance, and to construct driving technology that is adaptable to various situations by considering all uncertainties in the real-time changing driving environment.This allows unbiased and fair results based on flexible contextual understanding, even in situations that do not conform to rules and patterns, by considering the convergent interactions and dynamic situations of various objects that are possible in a real-time road environment. The transparent, environmentally adaptive, and fairness-based outcomes provide the basis for the decision-making process and support clear interpretation and explainability of decisions. All of these processes enable autonomous vehicles to draw reliable conclusions and take responsibility for their decisions in autonomous driving situations. Therefore, this paper proposes an Adaptability, Fairness, Transparency, Explainability and Accountability (AFTEA) Framework to build a stable and reliable autonomous driving environment in dynamic situations. This paper explains the definition, role, and necessity of AFTEA in artificial intelligence technology and highlights its value when applied and integrated into autonomous driving technology. The AFTEA framework with environmental adaptability will support the establishment of a sustainable autonomous driving environment in dynamic environments, and aims to provide a direction for establishing a stable and reliable AI system that adapts to various real-world scenarios.

With the burgeoning growth of online retail, the issue of counterfeit products has become a significant threat to both consumer trust and brand integrity, posing challenges to sustainable market practices. Online retail platforms are promoted to redesign their channel structures and enhance brand traceability to tackle counterfeits using blockchain technology. To investigate the interactions between blockchain technology and the channel structures of online retail platforms, we design a game theory model incorporating a manufacturer with(out) blockchain participation selling products via an online retail platform that operates an agency channel and/or a reselling channel. We show that the critical trade-off of blockchain participation comprises the brand assurance effect of the blockchain, the channel competition intensification effect, and the blockchain adoption cost. The platform is capable of strategically designing the channel structure to encourage (while discouraging) blockchain participation by the manufacturer. Our analysis highlights the complementarity between blockchain participation and the channel structure. Furthermore, the effect of the consumer’s belief in the reselling channel, the commission fee in the agency channel, and the substitutability between channels are investigated in depth. The research provides valuable insights for online retail platforms and policymakers seeking to foster a sustainable and trustworthy e-commerce ecosystem.

(1) Background: in the context of sustainable development goals (SDGs), this work explores the repair direction of future cultivated land protection policies based on the Smith policy implementation model from the historical evolution to ensure that the cultivated land protection policy does not deviate during the implementation process. (2) Methods: this paper uses literature research and inductive deduction methods to sort out the evolution process of Chinese cultivated land protection policy, summarize the successful experience of transferring the focus of cultivated land protection in chronological order, and conclude the repair direction of Chinese cultivated land protection. (3) Results: although the Chinese cultivated land protection policy in the historical evolution has through three significant phases, there are still certain issues in the development trend of Chinese cultivated land protection policy based on regional division of labor for grain transportation and sales. (4) Conclusion: directly utilizing feedback from farmers as stakeholders will contribute to the maturity and improvement of cultivated land protection policies in the specific implementation of cultivated land protection policies.

Faced with increasing climate challenges, this pioneering study introduces groundbreaking approaches to ensure the resilience of potato crops in east-central Poland. Our research aimed to develop an innovative, cost-effective system tailored to the diverse local conditions of this region. Conducted between 2018 and 2020, the study analyzed integrated and organic production systems across different soil types and potato varieties. The experiment was conducted using a randomized block design with three replications in two locations. Integrated practices, enhanced by mineral fertilization and chemical protection, notably delayed the onset of late blight by 16 days and extended the critical infection period by 17% compared to their organic counterparts. Remarkably, the integrated systems resulted in a 49% increase in total production and a 52% increase in commercial yields, demonstrating their effectiveness in enhancing crop resilience. Different potato varieties exhibit varied responses to cultivation systems, influencing both yield and disease resistance. Further investigation into these varietal responses can help optimize cultivation practices, leading to improved efficiency and sustainability in potato farming. Location and soil conditions have a significant impact on potato yield and the spread of potato blight. Further research into specific soil properties and the adaptation of varieties to local conditions can contribute to increased productivity and stability in potato production. This study not only paves the way towards sustainable agriculture but also highlights the crucial role of soil diversity in shaping resilient farming practices.

Introduction: Transportation logistics play a pivotal role in facilitating both individual mobility and supply chain operations on a global scale. However, conventional transportation systems have contributed significantly to urban congestion and environmental degradation. In response to these challenges, there is a growing momentum towards the adoption of intelligent transportation systems (ITS) and sustainable transportation solutions. This research aims to explore the potential of renewable energy sources to power electric vehicles (EVs) and flying automobiles, thereby accelerating the transition towards a low-carbon future. Objectives: The primary objectives of this research are as follows: - Investigate the role of renewable fuels in powering both EVs and flying cars to reduce reliance on fossil fuels and mitigate carbon emissions. - Analyze the dynamic growth and sustainability implications of advancements in battery technology and alternative renewable energy sources, such as Hydrogen Fuel Cells. - Evaluate the challenges and opportunities associated with the integration of flying vehicles into existing transportation infrastructure, focusing on safety, airspace control, and infrastructure development. - Review insights and guidance to stakeholders on promoting sustainable transportation solutions for EVs and flying cars through the utilization of renewable energy sources and the reduction of carbon emissions from the literature. Methodology: This research employs a mixed-method approach, combining literature review, and causal loop diagram analysis. The literature review provides a comprehensive understanding of current trends, challenges, and opportunities in sustainable transportation and renewable energy technologies. A causal loop diagram is utilized to visualize the dynamic interactions between various factors influencing the adoption of EVs and flying cars, including technological advancements, policy interventions, and market dynamics. Results and Discussion: The findings of this research highlight the significant potential of renewable energy sources, such as solar, wind, and hydrogen, in powering both EVs and flying cars. Advances in battery technology and hydrogen fuel cells are identified as key drivers in accelerating the transition towards sustainable transportation systems. However, challenges remain in terms of infrastructure development, safety regulations, and airspace management for flying vehicles. Nevertheless, there is a noticeable advancement in reducing carbon emissions and reliance on fossil fuels with the widespread adoption of EVs. By harnessing renewable energy and implementing effective policy measures, stakeholders might able to promote the widespread adoption of sustainable transportation solutions, thereby contributing to environmental protection and societal well-being. Conclusion: Literally, this research underscores the importance of sustainable transportation solutions in addressing urban congestion, environmental pollution, and energy security concerns. By leveraging renewable energy sources and embracing technological advancements, such as EVs and flying cars, stakeholders pave the way for a more sustainable and resilient transportation system. However, concerted efforts are needed to overcome existing challenges and ensure the successful integration of these technologies into existing infrastructure. Through collaborative partnerships and innovative initiatives, a low-carbon future for transportation logistics can be achieved, benefiting both the environment and society as a whole.

Unmanned aerial vehicles (UAVs, drones) are not just a technological achievement based on modern ideas of artificial intelligence; they also provide a sustainable solution for green technologies in logistics, transport and material handling. In particular, using battery-powered UAVs to transport products can significantly decrease energy and fuel expenses, reduce environmental pollution, and improve the efficiency of clean technologies through improved energy-saving efficiency. We consider the problem of maximizing the average environmental benefit of a fleet of drones given a periodic schedule of tasks performed by the fleet of vehicles. To solve the problem efficiently, we formulate it as an optimization problem on an infinite periodic graph and reduce it to a special type of parametric assignment problem. We exactly solve the problem under consideration in O(n³) time, where n is the number of tasks performed by vehicles.

India, a megadiverse nation, harbors significant biodiversity, particularly in tropical moist deciduous forests. However, these forests and valuable medicinal plants face habitat loss and overexploitation threats. While indigenous knowledge of medicinal plants exists, a comprehensive ethnomedicinal study still needs to be included, especially for Uttar Pradesh's Terai region. This study focuses on the Suhelwa Wildlife Sanctuary, a haven for medicinal plants within the Terai. We aim to document the knowledge of local healers regarding wild medicinal plants used in phytotherapy. We will employ quantitative indices and compare our findings with data from other regions to identify novel medicinal plant uses. This enriched database can serve as a springboard for future pharmacological research. Suhelwa's diverse geography and climate contribute to its rich medicinal flora, making it a prime candidate for exploring the potential of traditional knowledge for drug discovery and sustainable income generation for local communities.

Investments in small and medium-sized anaerobic digestion facilities have the potential to boost biogas production in Greece and other EU countries. This study aimed to evaluate the economic feasibility of anaerobic digestion facilities equipped with combined heat and power (CHP) units ranging from 50 to 400 kW, while treating livestock waste. For this purpose, data were gathered from various livestock operations (dairy cattle, poultry, swine, dairy sheep and goat) regarding their annual production, revenues, electricity and fuel usage, and waste generation. Waste samples were then collected and analyzed to assess their biochemical methane production potential. The capital and operational costs of anaerobic digestion facilities, from 50 and 400 kW, were calculated using the equations developed within the “eMT cluster” project. Findings indicate that current feed-in tariffs (FIT) of 0.21 € kWh-1 are insufficient to incentivize investment in anaerobic digestion facilities with capacities below 250 kW, highlighting the need for increased FIT rates or capital expenditure subsidies. Recommendations include shifting towards simplified technology and business models with reduced farmer involvement, coupled with supportive legislative framework and long-term electricity price guarantees. These measures are expected to foster the implementation of anaerobic digestion projects in the animal husbandry sector.

In a previous study we could show a change of membrane morphology and gas separation performance by varying the recipe of a casting solution based on polysulfone in a determined solvent system. Although all results were very reproducible, all used solvents were harmful and not sustainable. In this study therefore, the solvents tetrahydrofuran (THF) and N,N-dimethylacetamide (DMAc) are replaced by the more sustainable solvents 2-methyl-tetrahydrofuran (2M-THF), N-butyl pyrrolidinone (NBP) and cyclopentyl methyl ether (CPME). The gas permeation performance and for the first time morphology of the membranes before and after solvent replacement were determined and compared by single gas permeation measurements and SEM microscopy. It is shown, that THF can be replaced by 2M-THF and NBP without decreasing the gas permeation performance. With CPME replacing THF no membranes were formed. Best gas permeation results showed systems with 2M-THF as THF alternative. Permeances for the tested gases oxygen (O2), nitrogen (N2), carbon dioxide (CO2) and methane (CH4) were 2.66·10-4, 3.89·10-5, 1.53·10-3 and 4.52·10-5 mL(STP)/cm²·min·bar, respectively. permselectivities of those membranes for the gas pairs O2/N2, CO2/N2 and CO2/CH4 were 6.7, 38.3 and 34.0, respectively. When additionally replacing DMAc in the solvent system no or only porous membranes were obtained, even if the precipitation procedure was adjusted. These findings indicate that a complete replacement of the solvent system without affecting the membrane morphology or gas permeation performance is not possible. By varying the temperature of the precipitation bath an easy adjustment to mechanically stable PSU membranes is possible, if just THF was replaced by 2M-THF.

Tribal healers and local practitioners possess knowledge about plant uses passed down through generations. However, habitat loss, unsustainable harvesting, and declining traditional knowledge threaten this valuable resource. India, a global biodiversity hotspot, is rich in medicinal plants. Documenting the traditional knowledge prevents it from being lost and ensures the preservation of this cultural heritage. Recording traditional practices helps bridge the gap between traditional and modern medicine. This study quantifies the ethnomedicinal uses of plants within the Sohag Wildlife Sanctuary. The findings contribute to preserving traditional knowledge and promoting the sustainable use of medicinal plants. The study documented 95 medicinal plant species from 39 families, highlighting the importance of ethnomedicinal studies for preserving traditional knowledge and ensuring the sustainable use of medicinal plants. In the future, scientific studies can be organized to understand their efficacy, leading to developing new, potentially safer, and more effective medications. Identifying and documenting medicinal plants is crucial in safeguarding cultural heritage, fostering scientific discovery, and promoting sustainable healthcare practices.

This literature review paper delves into the synergies between Climate-Smart Agriculture (CSA) and the effective management of food losses. With the escalating challenges posed by climate change and the pressing need to address food security concerns, the intersection of these two critical domains becomes paramount for sustainable agricultural practices. The review explores existing research on the implementation of climate-smart agricultural techniques and their impact on mitigating food losses throughout the agricultural value chain. The paper synthesizes findings related to climate-resilient crop varieties, precision farming, water-use efficiency, and sustainable soil management, highlighting their contributions to reducing post-harvest losses and enhancing overall food security. In addition to summarizing current knowledge, this paper identifies gaps in the literature and proposes avenues for future research. This review serves as a foundation for researchers, policymakers, and practitioners seeking to contribute to the advancement of climate-smart agriculture and the reduction of food losses, paving the way for a more sustainable and resilient global food system.

Sustainable Humanitarian logistics is gaining attention due to increased disasters. It involves various operations to support people's survival efforts. Key characteristics include unpredictable demand, sudden large demand volumes, high stakes in delivery timeliness, and limited resources. However, the complexity and unpredictability of disaster scenarios necessitate robust and adaptable performance measurement models to evaluate the effectiveness of sustainable humanitarian relief logistics (SHRL). This study proposes a novel performance measurement model for sustainable humanitarian logistics and supply chains that integrates the Fuzzy Delphi Method (FDM) and Fuzzy Decision-Making Trial and Evaluation Laboratory (Fuzzy-DEMATEL) method. In this research, using 115 articles focused on sustainable humanitarian logistics and supply chains, crisis management, and humanitarian aid, this research identified 25 key performance indicators (KPIs) in the initial phase. Following the implementation of FDM, 19 KPIs were identified as crucial for further analysis. These KPIs were then divided into four distinct categories: "Quality," "Accountability," "Operational Excellence," and "Sustainability". Initially, FDM is utilized to reach a consensus among experts concerning KPIs for humanitarian logistics and supply chains. By incorporating the inherent uncertainty and vagueness in expert judgments, FDM refines the list of key performance indicators that reflect the real-life conditions and constraints in disaster operations. Finally, the fuzzy DEMATEL approach was used to analyze interrelationships among factors, identifying cause-and-effect behavior and ranking them, forming a robust theoretical framework. The study concludes with the development of a comprehensive performance measurement model that facilitates the strategic planning and operational assessment of humanitarian organization operations. The integration of FDM and fuzzy DEMATEL methods offers multiple perspectives for decision-making and helps stakeholders identify critical areas for improvement. Based on the acquired results, the KPIs attached to the Quality (P1) aspect of the proposed framework have gained significant importance and main cause in the cause-and-effect relationship which impacts and is helpful to improve the performance of humanitarian organizations in all phases of disaster management. The KPIs prompt delivery (D1), and delivery accuracy (D2) are more significant, while capacity building and training (D19) and delivery compliance (D15) are least significant in SHRL scenarios. This research is expected to support humanitarian organizations in enhancing their capabilities, thereby improving the effectiveness and efficiency of aid delivery in disaster-stricken areas.

This Paper delves into the critical role played by fossil fuel-based polymers in promoting United Nations Sustainable Development Goals (SDGs) in the face of challenges brought about by swift population growth, suburbanization, and mechanization. It sheds light on the environmental and energy security recompences of converting plastic waste into biofuels and other valuable energy resources through state-of-the-art processes such as thermochemical conversion and pyrolysis. Besides, the research investigates the utilization of polymers in solar energy, energy storage, and low carbon transportation, emphasizing the inevitability of a dual approach that combines advancements in bio-based polymers and recycling technologies. It highlights the significance of collaborative endeavors involving governments, industries, and communities to overcome the technical, economic, and regulatory complications in transitioning towards a sustainable and circular plastic economy. Eventually, it showcases the potential of fossil fuel-based polymers in fostering a sustainable energy landscape, conducive to decarbonization efforts, and endorsing environmental sustainability.

Modern forestry systems are based upon typologies of forest types (FT). Many proposals were developed in Argentina, but without following unified criteria. The objective was to compare different approaches based on (i) functional forests (phenoclusters), and (ii) forest canopy-cover composition by tree species. We employed data of National Forest Inventories, forest models and climate data, comparing the proposals using univariate analyses. We test the performance of phenoclusters to differentiate the variability of native forests (proxy: forest structure), biodiversity (proxy: indicator species) and environment (proxies: soil carbon stock, elevation, climate). We proposed a simple forest type classification methodology based on species composition, considering basal area of tree species. Finally, we compared the performance of both proposals. In regions where monospecific forests are predominant, the classifications based on forest canopy-cover composition are feasible, but phenoclusters allowing to increase the complexity at landscape level. In those regions were predominant multi-specific stands, the classifications based on forest canopy-cover composition are useless, and phenoclusters allowing to decrease the complexity at landscape level. These results allowing to harmonize national FT classifications by using criteria and indicators to achieve sustainable forest management and conservation proposals.

Current VAT rules for cross-border e-commerce companies in the EU are not sustainable, because they are extremely complex and often opaque, due to the lack of tax harmonization. The aim of the research is to explore, using a qualitative method, what kind of harmonization would make the current legislation more uniform, simpler, more transparent, and easier to understand, without conflicting with the rules of any Member State. To this end, the aspects of the new platform regulation introduced on 1 July 2021 and its potential for expansion are assessed through information from possible sales models. The research suggests that the rules on platforms do not cover all possible sales models, which in our view imposes an unnecessary extra administrative burden on some businesses and makes their tax activities less transparent. In the light of the results of the research, we propose that the current EU platform regulation should be extended to cover B2B, B2C transactions and services. As a result of this suggested harmonization, a simpler, more transparent, uniform and sustainable tax system would contribute to the whitening of the economy, generating additional tax revenue for Member States.

Sustainable continuous cover forestry is defined and analyzed in several ways. The differential equation representing growth of the basal areas of individual trees, motivated by fundamental biological production theory by Lohmander (2017a), is analyzed and extended in different directions. From the solution of the differential equation, the basal area and the tree diameter are obtained as explicit functions of time. The diameter is a strictly increasing function of time. In the absence of competitors, the diameter increment is shown to be a strictly decreasing function of time. Hence, the diameter increment can also be interpreted as a strictly decreasing function of the diameter. Alternative forms of adjustment of the differential equation, with consideration of competition, are defined. If the competition is strong, with large trees in the vicinity of a particular tree, then the basal area increment, and the diameter increment, are reduced. The growth of a large tree is less sensitive than the growth of a small tree, to competition from other trees. Under strong competition, the basal area increment, and the diameter increment, are strictly concave functions of the size of the tree. The unique maximum of the diameter increment occurs at a higher diameter, if the competition increases. In dynamic equilibrium, the tree size frequency distribution is stationary. If natural tree mortality can be avoided via the harvest strategy, the tree size frequency distribution is a function of the size and competition dependent growth function, and the harvest strategy. Empirical tree size frequency data are used to simultaneously estimate parameters of a size and competition dependent growth function and the applied harvest strategy, via nonlinear optimization. The properties of the estimated growth function are consistent with the corresponding properties of the production theoretically motivated hypothetical function, and the properties of the estimated harvest strategy confirm the corresponding hypotheses. The R2 of the nonlinear regression exceeds 0.97. With access to an empirically estimated equilibrium tree size distribution, it is possible to: 1. Estimate size frequency relevant parameters of tree size and competition dependent growth functions for individual trees. 2. Estimate the applied harvest strategy. 3. Explain and reproduce the empirically estimated tree size equilibrium distribution.

Certain Trichoderma isolates provide biofertilizer, biocontrol, and other plant-beneficial activities while inhabiting the soil or internal plant issues; and their use in agricultural systems could contribute to sustainable food production. It is thought that this colonization of soil and internal plant tissues is fundamental for biocontrol and biofertilizer applications. Our collective analyses of prior surveys, where the tef1 sequence was almost exclusively used to identify Trichoderma species, showed that isolates from the Harzianum Complex Clade, the T. asperellum/T. asperelloides group, T. virens, T. hamatum, and T. atroviride were prevalent in soil and/or as endophytes. Population structure and genetic diversity of these species were investigated, and new lineages with geo-graphic significance within T. atroviride, T. asperellum, T. hamatum, and T. virens populations were found. The nearest relatives of some species were also revealed. Choosing isolates from among more than 500 known Trichoderma species for use in non-targeted evaluation screens for biocontrol or biofertilizer applications is time-consuming and expensive. Preferentially selecting species from T. atroviride, T. asperellum/T. asperelloides, T. hamatum, species from the T. harzianum Complex Clade, T. virens, and possibly nearest relatives, may speed the identification of candidates for commercialization due to the demonstrated ability of these species to successfully inhabit the soil and endorhizosphere. To our knowledge, this is the first report where dominant soil- and en-dophyte-inhabiting Trichoderma species were identified from past survey data and population structure and genetic diversity analyses conducted.

The protection of grapevine from the diseases is now particularly focused on the development of environmentally friendly strategies. Although sulphur is not in itself a toxic substance, a large use towards powdery mildew, in organic vineyards especially, may cause problems to environment, health and safety of viticultural workers and plant phytotoxicity. The activity on powdery mildew of sulphur applied at doses reduced up to 50% in tank mixtures with silicates and Equisetum arvense based products, never tested on grapevine, was assessed. Two-year trials were carried out applying the products every 7-9 days in the period of greatest risk for spring ascosporic infections, in two organic vineyards in the Abruzzo region, Italy. The effectiveness towards the disease of the mixtures was demonstrated, often to a greater extent than that of full-dose sulphur, normally used in the vineyards. Furthermore, in vines treated with the mixtures, increases in yield quantity and quality, such as higher contents of soluble solids and lower levels of total acidity, have been shown. Due to the strong efficacy demonstrated on the leaves, silicon-based products + sulphur mixtures can also be recommended in eradicative applications, aimed at reducing the inoculum of the disease. The great activity of the mixtures demonstrated in this study suggests confirmation through further investigations on different cultivars and vine-growing areas at different levels of infection, also testing the effectiveness of individual silicon products against the disease.

The Glasgow Declaration called for scientifically based measurements of CO2 emissions in the tourism industry to achieve the goals of the Paris Agreement. Despite the economic and employment downturn caused by COVID-19, there are limited cases of environmental assessments related to tourism. This study estimates the carbon footprint of the tourism industry in major G20 countries before and after COVID-19. Understanding the characteristics of inbound tourism and domestic tourism is important as they impact different markets. GHG emissions from tourism mainly stem from transportation, but the type of travel and country differences also make souvenirs, accommodation, and food and beverages significant emission factors. The pandemic has greatly impacted the tourism industry. In 2020, GHG emissions from both domestic and inbound tourism significantly decreased, affecting the number of tourists. In some countries, measures against COVID-19 influenced these figures, and although signs of recovery were observed in 2021, the reduction rates varied by country. These emission reductions should be the goals pursued by the tourism industry in the post-COVID-19 era, requiring efforts to achieve sustainable tourism.

In the face of pressing global challenges, coupling the synergy of dance arts, sustainability, and marketing communications emerges as a potent catalyst for advancing sustainable behavior within society. Although prior research has examined the emotional stimulations raised by dance performance, it has not systematically demonstrated the role of traditional dance as a vehicle for sustainability marketing communications. This study fills this gap by using the AIDA model (Attention, Interest, Desire, Action) as a foundation, conceptualizing dance performance elements into seven dimensions, and incorporating emotional engagement and environmental consciousness to foster sustainable behavior. Collaborating with Taiwanese dance troupe, the research produced a performance titled, ‘The New Dragon Palace Chronicle’, which focuses on the themes of destruction and preservation of underwater life, enriched with cultural and sustainability symbolism. The hypothesis were tested on a sample of 315 Taiwanese audience who watching the performance. The results confirmed that the seven dimensions of the dance elements have substantial validity and reliability, significantly drawing the attention of the audience as preliminary stage of awareness. This attention fosters emotional engagement and amplified environmental consciousness and significantly influences interest, desire, and ultimately, sustainable behavior action. The findings underscore the vital role of dance art performance in nurturing actions that contribute to social sustainability.

Post-earthquake fire is considered as a catastrophic secondary disaster to personal and property safety. In this article, an evacuation assessment of a complex rail transit station under the post-earthquake fire for sustainable buildings was conducted from the internal environment and external rescue based on Building Information Modeling (BIM) and Fire Dynamic Simulation (FDS). The internal environment evacuation assessment simulation experiments were conducted in six hypothetical high-risk scenarios. Besides, the external rescue assessment was based on investigation of the route and the rescue time required during different periods of holidays and workdays. The results show that: (1) The influence caused by different size of fire area in the power distribution room is smaller than those in the train at the platform floor. (2) In the case of fire scenarios with the same fire area but different fire locations, the impact on temperature is greater than that on CO concentration in power distribution room. (3) It shows slight differences between single-floor fire and double-floor fire on evacuation of small area fire in power distribu-tion room. Meanwhile, optimized design recommendations are proposed to reduce the risk of emergency evacuation in both internal and external environments of rail transit stations for sustainable future buildings.

Customer satisfaction is the process of reaching a customer's expectations to generate delightful experiences with a product or a brand. Delight involves delivering an unforgettable experience to users by focusing on their requirements, desires, and interests. Delighting Customers is crucial for organizations’ economic growth worldwide, especially in the airline industry. This study aims to determine if safety measures, ticketing policies, and the cost of air travel impact among the airline passengers’ satisfaction post-COVID-19 in Malaysia. A research framework is designed to present an in-depth understanding of the mentioned variables. In this study, a comprehensive survey using online questionnaire was used and 388 valid responses were obtained from airline passengers in Malaysia. Data were analyzed by employing data reduction technique and multivariate data analysis. The results revealed that safety appears to be the most essential aspect of airline customer satisfaction among Malaysians, while cost is perceived as a significant factor. Moreover, as the cost of living rose because of the pandemic, many of the income earners in the lower category are less inclined to take vacations. In a nutshell, the study recommends that airlines implement a conscious practice that contributes to the happiness of passengers, which in turn increases profitability and ensures sustainable growth of the airlines.

This paper focuses on leveraging a cutting-edge 3D state-space model for a holistic eco-friendly assessment in petrochemical operations. - By applying the ecological carrying capacity theory and the three-dimensional state-space model, this research aims to unleash the next frontier of sustainability in the petrochemical industry. - The proposed methodology will enable advanced and comprehensive eco efficiency evaluation in petrochemical operations. - Through the integration of the ecological carrying capacity theory and advanced modeling techniques, this research seeks to revolutionize sustainability assessments in the petrochemical sector. - The utilization of the cutting-edge 3D state-space model will provide a more advanced and accurate understanding of eco-friendly practices in petrochemical operations. This research presents a unique approach distinct from existing literature, which primarily examines business eco efficiency from behavioral motivation and strategic perspectives. In contrast, this paper introduces a novel three-dimensional state-space model to evaluate the ecological efficiency of petrochemical operations. By combining the ecological carrying index and state space, this model represents the ecological impact of petrochemical operations in a three-dimensional geometric space. It considers petrochemical operations as a significant factor exerting pressure on natural resources and the natural environment. In this three-dimensional state-space model, the three axes represent different dimensions of petrochemical operations. The first axis represents the economic status, which quantitatively describes the financial aspects of the operation. The second axis represents the utilization of resources, capturing the extent to which resources are consumed in the operation. The third axis focuses on the impact of the operation on the environment, allowing for a quantitative assessment of its ecological footprint. By incorporating these dimensions, the model aims to provide a comprehensive and quantitative description of the economic activities of petrochemical operations and their interactions with resources and the environment.The primary focus of this research is to apply the three-dimensional state-space model to calculate the ecological carrying capacity of petrochemical operations. By doing so, it aims to verify the feasibility and applicability of the model in determining the ecological efficiency of these operations. The research also aims to provide theoretical tools that can assist operations in making more informed ecological efficiency judgments. By utilizing this model, petrochemical operations will have a quantitative framework to assess and improve their environmental impact, thus fostering more sustainable practices. The findings of this research demonstrate that the implementation of this method can effectively identify issues related to resources, economy, and environment throughout the development of petrochemical operations. By identifying these problems, it provides managers with a solid foundation for making strategic decisions that promote sustainable development. With this valuable information at their disposal, managers can proactively address challenges, optimize resource utilization, and minimize environmental impacts, thus steering the petrochemical operations towards a more sustainable and responsible path.

In an era driven by technology and connectivity, where the sphere of learning goes beyond conventional classrooms, e-Service-Learning (e-SL) merges the possibilities of technology with the principles of experiential education in a powerful blend [1]. Service-learning (SL) is an educational proposal that has been cited by UNESCO [2] as an innovative educational tool through which to address the complex challenges of our society. The Sustainable Development Goals [3] provide a framework around which to structure the SL projects and thus develop the skills needed to act on the full range of goals. Embedding digital means open a debate on the intricate relationship between technology, education, and societal impact [4]. By analyzing two focus groups involving faculty, students and community partners, this contribution aims to explore the potential of combining SL and digital empowerment (DE). The focus group participants discussed the opportunities for innovation, the expected impact on them and the society at large, their needs and the pre-conditions needed to make SL and DE successful, and limitations. The results are presented according to the six principles of sustainability education in the university environment, highlighting the transformative potential of combining these principles within SL and DE.

Purpose: This study investigates the implementation and impact of maker culture—viewed as a tool for developing green digital skills—in higher education institutions in Hong Kong. Maker culture, a collaborative educational approach, embraces students’ capacity for self-paced, autonomous learning and applies this knowledge to creative problem-solving and innovation, key aspects of sustainability education. Methods: An empirical study was conducted, focusing on the experiences of teachers in the higher education sector in Hong Kong. Eight individuals were interviewed to gain insights into their perceptions and experiences with maker education within sustainability contexts. The sample was limited to ensure cross-sectional comparability and direct weighting of teachers’ experiences within a singular, complementary educational setting. Results: The findings provide valuable insights into the benefits and challenges of integrating maker education into traditional educational systems to foster green digital skills. It became evident that adequate resources, effective teachers, and improved administrative systems play significant roles in the successful implementation of this approach. Conclusion: Maker education, as a tool for developing green digital skills, offers a promising alternative to traditional performance-based studies. It has the potential to lead to a future of education that is creative, innovative, and student-directed, fostering sustainability competences. Therefore, despite the challenges, with the right support and resources, the integration of maker culture into educational systems could significantly transform teaching and learning processes, advancing sustainability education.

This study examines the dynamics of failure development in marginalized communities, investigating the interplay of socioeconomic, environmental, and community engagement factors. The research aims to uncover underlying causes, provide policy recommendations, and elucidate the challenges faced by these communities. However, limitations include a restricted focus on marginalized areas, data limitations, and an exclusive emphasis on socioeconomic factors. The analysis reveals gaps in addressing political influences, limited coverage of success stories, and potential biases in the methodology. The conclusion emphasizes the transformative power of community-led initiatives to address challenges, foster inclusivity, and create sustainable change. These initiatives prioritize capacity building, social cohesion, economic development, and access to education and healthcare. Implications for policy and practice underscore the need for comprehensive interventions, collaboration, empowerment, and sustainable development. Future research directions include exploring the long-term impact of historical failures, intersectionality, the role of technology, mental health implications, and comparative analysis.

The present state of the natural environment is significantly influenced by the construction sector. Due to the large amounts of consumed natural resources and materials as well as the high volume of emitted pollutants, the building industry is considered to have a key influence in achieving a global sustainable development. A considerable part of the ecological impact of the built environment is influenced by the energy consumed for creating appropriate indoor conditions as well as by the greenhouse gases that are emitted during the operation stage of a building’s life cycle. Therefore, the energy performances of existing buildings must be significantly improved in the near future. This paper analyzes the influence of the thermal insulation thickness of walls on the linear thermal transmittances and the heating demand of an existing building. The resulted values show that while increasing the insulation of the walls leads to a serious heat demand reduction, a deep renovation of the building cannot be achieved solely by using this solution.

Sustainability enhancement is one of the main challenges of aquaculture. Since feeds represent one of the major costs from an environmental point of view, it is priority to find sustainable alterna-tive ingredients for aquaculture diet. Insect meals have some advantages as ingredients for aqua-culture, like its sustainability and nutritional value. However, the biggest drawback of full-fat in-sect meal is its fatty acid profile. The objective of this work was to assess the effects of partial plant or marine-derived ingredients replacements with full-fat Tenebrio molitor meal (TM) at two differ-ent levels on growth performance and fatty acids profiles of Solea senegalensis. For this purpose, a control diet and four experimental diets were tested, two of them contained 5 and 10% w/w TM that replaced mostly fish meal. Two other experimental diets included 10 and 15% w/w TM that replaced mostly plant meals. The inclusion of insect meal resulted in an improvement in growth rate and feed efficiency in both cases. Moreover, dietary inclusion of insect meal increased muscle total protein and decreased total lipid, without changes in phospholipids, and maintaining the relative level of n-3 PUFA. In conclusion, our study demonstrated that full-fat TM inclusion up to 15% in S. senegalensis diets had no negative effects or even positive effects on fish survival, growth performance, nutrient utilization and flesh quality.

The research experimentally examines the viability of biodiesel obtained from pork fat (BP) as a sustainable aviation fuel (SAF) when mixed with kerosene (Ke) - Jet-A aviation fuel + 5% Aeroshell 500 oil. Various blends of biodiesel and kerosene (10, 20 and 30% vol. of BP added in Ke) were subjected to testing in an aviation micro turbo-engine under different operational states: idle, cruise, and maximum power. During the tests, monitoring of engine parameters such as burning temperature, fuel consumption, and thrust force was conducted. The study also encompassed the calculation of crucial performance indicators like burning efficiency, thermal efficiency, and specific consumption for all fuel blends under maximum power conditions. Physical-chemical properties of the blends, encompassing density, viscosity, flash point, and calorific power, were determined. Furthermore, elemental analysis and FTIR were used for chemical composition determination. The research delved into analyzing the air requirements for stoichiometric combustion and computed resulting emissions of CO2 and H2O. Experimental assessments were performed on the Jet Cat P80® micro-turbo-engine, covering aspects such as starting procedures, sudden acceleration, sudden deceleration, and emissions of pollutants (NOx, CO and SO2) during several engine operational phases. The outcomes reveal that the examined fuel blends exhibited stable engine performance across all tested conditions. This indicates that these blends hold promise as sustainable aviation fuels for micro turbo-engines, presenting benefits in terms of diminished pollution and a more ecologically sound raw material base for fuel production.

The modification of cellulose woven fabrics and viscose nonwovens was carried out with the aim of preparing sustainable coatings from biodegradable natural polymers. The modification of fabrics with biodegradable natural polymers represents an ecological alternative to other textile modifications such as the sol-gel process. Coatings were prepared from erythritol, gelatin and collagen in various formulations with the addition of propolis and alginate fibers and a natural plasticizer (glycerin). The morphology of the materials was determined before and after modification with Dino-lite, the pH value, the drop test method, the angle recovery angle, the thickness and the mass per unit area. The modifications have no significant effect on the thickness and mass per unit area, in a larger proportion they show hydrophilic properties, which favours the application for medical purposes - for example the absorption of exudates, wound dressings etc. Due to the neutral and slightly alkaline pH value of the modified samples, they are suitable for external application on the skin. The recovery angle of the modified samples proves that the samples do not tend to crease and that they retain their elasticity after modification and have a pleasant textile feel (fabric hand).

The new Common Agricultural Policy of the European Union (EU) (2023-2027) envisages a stronger Agricultural Knowledge and Innovation System (AKIS) that will unite all relevant ac-tors in a co-creation process to ensure knowledge flows within and across Member States. A sig-nificant and increasing body of literature focuses on the strategy and processes of strengthening AKIS. However, there is a relative gap in research related to the role of AKIS in achieving sus-tainability in the farming sector. The purpose of this paper is to provide an overview of the advancements so far of AKIS across the EU when it comes to facilitating the sustainable management of natural resources (SMNR). The paper builds upon a comprehensive review of rel-evant literature during the last 15 years covering all 28 EU countries (including the United King-dom until 2019). We conclude that AKIS architecture in most EU countries lacks a comprehensive structure promoting SMNR. Based on the results we identify countries with relatively high inten-sity of research and development projects linking AKIS to SMNR and where SMNR is better in-tegrated to AKIS. Our results can be of interest to the design of stronger AKIS during the new programming period.

Efficient traffic systems control in large cities with complex traffic management of signalized intersections is a challenging task, particularly when dealing with high traffic volumes. The city of Zagreb faces this challenge, as all administrative and governmental institutions are located in the old city centre, and routes for escorted vehicles have a significant impact on the traffic network. This paper addresses the issue of the impact of unconditional priority for escorted vehicles on the energy efficiency of the urban traffic network in the city of Zagreb. The traffic network model is developed by using the PTV Vissim microsimulation software. The evaluation was conducted with node (delay, queue length, number of stops) and network evaluation parameters (CO2 emission, NOx emission, PM10 emission, and fuel consumption). The results show that unconditional priority has minimal impact on energy consumption and exhaust emission in the observed scenario. This is a significant result considering all actions that have to be done to manage the passage of the escorted vehicles through the traffic network.

This study examined the relationships between attitude, subjective norms, perceived behavioral control, and behavioral intention through the perceived value of Pilates participants. The par-ticipants of this study were 301 Pilates students using Pilates studios located in Busan, Ulsan, and Gyeongbuk Province. The participants were selected by convenient sampling, a non-probability sampling method. The collected data were analyzed using descriptive analysis, reliability analysis, correlation analysis, confirmatory factor analysis, and structural equation modeling analysis using SPSS 22.0 and AMOS 24.0. The results can be summarized as follows. First, among the three sub-factors of perceived value, functional and social values had a positive effect on attitude. Second, attitude, subjective norms, and perceived behavioral control, which are three main components of the Theory of Planned Behavior, had a positive effect on the behavioral intention for Pilates. These results suggest that Pilates instructors require meticulous planning and efforts to develop an en-vironment for promoting spontaneous interest and participation to attract students and engage their attention and interest in the field.

The paper presents a thorough examination of the burgeoning field of utilizing manufacturing waste for sustainable energy generation, aligning with the global imperative for resource efficiency and clean energy solutions. With the manufacturing sector being a significant contributor to waste generation, this study explores innovative approaches to transform waste materials into valuable resources, thereby mitigating environmental impacts and contributing to a circular economy. This work critically reviews current trends, emphasizing technological advancements, policy interventions, and market dynamics shaping the manufacturing waste utilization landscape. Noteworthy developments, such as advanced sorting technologies and the integration of digital solutions, are discussed in detail, showcasing their role in enhancing the efficiency of waste management processes. The study outlines future trends in the field, anticipating a shift towards closed-loop systems guided by circular economy principles. This comprehensive review aims to contribute to the discourse on sustainable waste management and energy generation by providing a holistic perspective on the field's current state and offering insights into the future trajectories that will propel manufacturing waste toward a more sustainable and circular future. The synthesis of technological innovation, collaborative efforts, and evolving regulatory frameworks presents a compelling case for the continued exploration of manufacturing waste as a valuable resource in the pursuit of a more sustainable and energy-efficient world.

The study within the current research is focused on theoretical assessment of sustainable aviation fuels (SAF) obtained by blending traditional jet fuels Jet A and different liquids (biodiesel and alcohols) from analytical point of view. Within this paper in-depth analysis ofthe physical-chemical properties of Jet A fuel blended with different biodiesels and alcohols has been performed. Also within the blends Aeroshell 500 oil has been added (5% vol.) for ensuring the lubrication of the turbo engine. The blends consists of: Jet Aaviation fuel + biodieselfrom: palm oil, pork fat, sunflower oil and alcohols: methanol, ethanol and butanol. All the 6 liquids have been blended with Jet A in the following percentages: 10, 20 and 30%. Flash point, kinematic viscosity, density, freezing point, elemental analysis and FTIR analysis have been performed for all the liquids: Aeroshell 500, jet A, jet A + 10, 20, 30% biodiesel from waste palm oil, pork fat and waste sunflower oil, jet A + 10, 20, 30% methanol, ethanol and butanol, biodiesels and alcohols. The obtained results shows the influence of each of the blend’s components on the physical-chemical properties of the blends. Based on the physical-chemical analysis of the blends, conclusions on the behavior of the blends during burning and the gaseous pollutants resulting from the burning process can be drawn.

Knowing the reasons for mobility choices, how users evaluate the characteristics of public transport and how satisfied they are with the travel experience is essential to promote the use of LTP (Local Public Transport), especially in rural or suburban areas where the use of private car is often prevalent. The present study aimed to investigate the mobility experience and the reasons for use and non-use of the LPT in a suburban area by the people travelling to a large Hospital Centre in a Province of the North-east of Italy. An anonymous questionnaire was completed by people from different categories travelling to the hospital (students, employees, clients), user and non-users of the LPT. The results showed that insufficient hourly coverage and accessibility of the service are the primary reasons for opting not to use LPT and together with reliability and comfort, these factors contribute to user satisfaction with their travel experience. Perceived sustainability of LPT contributes to overall travel satisfaction. However perceived sustainability alone does not appear to influence the choice of LPT if the service lacks adequate accessibility and does not meet the needs of travelers in terms of hourly coverage

We investigate if anyone is being left behind in accessing safely managed drinking water (SM) in achieving the 2030 agenda. We use 23 countries grouped globally as critically insecure water (CIWC). The results indicate none of the CIWC had over 50% of the population accessing SM, N. America and Europe had highest percentages while Sub Saharan Africa had the least. People left behind are found in rural areas, in countries vulnerable to climate change because of poor governance, low-income, and women’s low education. Institutional quality, equity and equality should be improved in using resources critical to leaving no one behind.

In recent times, there has been a revolutionary surge in antioxidant research, with a focus on harnessing microalgae to enhance wellness and extend human longevity. Microalgae, a diverse group of unicellular photosynthetic organisms, have emerged as promising sources of natural antioxidants due to their ability to synthesize various bioactive compounds, including carotenoids, polyphenols, and tocopherols. These antioxidants play a pivotal role in scavenging free radicals and reducing oxidative stress, known contributors to aging and chronic diseases. This review provides an overview of recent advancements in understanding microalgae's antioxidant potential, covering their biochemical composition, extraction techniques, and purification methods. Moreover, it delves into compelling in vitro and in vivo studies showcasing microalgae-derived antioxidants' protective effects against oxidative damage, inflammation, cardiovascular diseases, and neurodegenerative disorders. The sustainable cultivation of microalgae in controlled environments further supports the potential for large-scale production and commercialization of their antioxidant compounds. As microalgae continue to revolutionize antioxidant research, they hold immense promise in developing novel preventive and therapeutic strategies to promote human health and wellbeing.

The preservation of biodiversity has become a major concern in contemporary society. It is essential to understand teachers' representations of biodiversity to effectively guide educational efforts because of the significant role of education in raising awareness and promoting sustainable behavior. Through a survey of a sample of 118 teachers, we adopted a mixed-method approach combining both a closed questionnaire and interviews. We used these methods to explore teachers' representations of the concept of biodiversity as an integral part of the school curriculum, as well as to gather their views on certain features of its teaching. The results state that the majority of teachers perceive biodiversity as a whole and in its most complex relationships. During their professional experience, they have developed a biocentric and anthropocentric conception of biodiversity. This study provides valuable information to guide future pedagogical practices and educational policies in sustainable education.

Interior designers play a pivotal role in shaping the built environment and catalyzing positive change through the adoption of sustainable design practices. This study centers on the analysis of prevailing attitudes held by interior designers in Jordan towards sustainable interior design practices. Through a comprehensive methodology involving a literature review and a three-part questionnaire, the research explores the benefits, challenges, and integration of sustainability principles. The study highlights substantial awareness (85%) of sustainable interior design's environmental impact and resource preservation. Additionally, 81% acknowledge its enduring significance, and 89% recognize its diverse benefits. While 61% exhibit familiarity, 27% claim professional experience. Among sustainability indicators, energy efficiency scores 4.25, resource efficiency 4.27, and "Design aligns with laws and regulations by the Ministry of Labor" ranks highest at 4.37. This study significantly augments our understanding of sustainable interior design by introducing a comprehensive evaluation framework that encompasses the three sustainability dimensions. It equips decision-makers with a robust tool to identify specific practices that bolster sustainability performance, further advancing the field.

Although tourism seasonality significantly influences the livelihood activities of rural tourism households, limited research has explored how they adapt their livelihood strategies to achieve optimal outcomes. Employing an exploratory sequential mixed-methods design that combines thematic analysis and fuzzy-set Qualitative Comparative Analysis (fsQCA), we investigated the relationship between the livelihood strategies and outcomes of rural tourism households under the influence of tourism seasonality at the Guilin Karst World Heritage Site. The results indicate that livelihood strategies adopted by rural tourism households include "Tourism Persistence,” "Seasonal Employment,” and “Seasonal Farming” during the off-season, and “Extending Working Hours,” “Increasing Staffing Input,” and “Increasing Capital Input” during the peak season. Furthermore, these strategies form flexible combinations to realize livelihood outcomes, with “Extending Working Hours” being a necessary condition. The findings also revealed that the four configurations of seasonal livelihood strategies in the two patterns significantly contributed to high livelihood outcomes. One is named “Peak-Season Driven Pattern,” where “Extending Working Hours” and “Increasing Staffing Input” are the core conditions; the other is named “Peak-Off Blend-Driven Pattern,” where “Extending Working Hours,” “Increasing Capital Input,” and the absence of “Tourism Persistence” are the core conditions. These findings provide theoretical and practical insights for sustainable livelihood research.

Investigating the potential impact of composting and recycling waste on income distribution are crucial to promote a fairer and more sustainable fresh tomato supply chain (FTSC). Therefore, this study aims to explore the potential of gaining extra income from recycling tomatoes waste generated along the FTSC and to calculate the contribution of extra income from recycling tomato waste to reduce income inequality along the FTSC. Data were collected from 136 greenhouse tomato producers, 60 wholesalers, 18 exporters, 120 domestic retailers, 22 overseas retailers, and 3 recycling facilities in Türkiye. Marketing cost, absolute marketing margin, relative marketing margin and net profit margin were used when economically analyzing the FTSCs. Research results showed that the net profit share of the producer decreased associated with the increasing number of intermediaries. Research results also showed that revenue gained from composting and recycling of product loss and waste increased the welfare of greenhouse producer more than other supply chain actors. When taking into account the revenue from composting and recycling of wastes, producers increased their net profit by 9.85% at first FTSC, while that of second and third FTSCs were 8.29% and 9.21%, respectively comparing to the prevailing conditions. The contribution of extra revenue from composting and recycling of wastes to retailers was more comparing wholesaler and exporter. Retailers and wholesalers gaining from recycling in domestic FTSCs was more comparing to overseas one. Close cooperation between producers, wholesalers, exporters, retailers, and recycling facilities is essential for the effective implementation of waste recycling initiatives. Organizing the training and education programs focused on waste management can increase the extra income of producers and active intermediaries in FTSC from composting and recycling tomato wastes. Offering financial incentives, grants, or subsidies can encourage producers and other actors within the supply chain to adopt waste recycling practices. Continuous research and innovation are crucial in identifying and developing new technologies, processes, and strategies to minimize food loss and waste. Dominating fair-trade practices to ensure that all FTSC actors may balance the income distribution among FTSC actors.

Anthracnose and root rot are major foliar and root diseases of strawberry, respectively that cause most yield and quality losses. Anthracnose is caused by multiple species belonging to Colletotrichum spp complex. This disease alone can causeup to 70% yield loss in North America. Colletotrichum spp. cause several disease symptoms on strawberries, including root, fruit, and crown rot, lesions on petioles and runners, and irregular black spots on the leaf. In many cases, a lower level of infection on foliage remains non-symptomatic (quiescent), posing a challenge to growers as these plants can be a significant source of inoculum for the fruiting field. Reliable detection methods for quiescent infection should play an important role in preventing infected plants' entry into the production system or guiding growers to take appropriate preventative measures to control the disease. The selection of highly effective fungicides and including them in a schedule to prevent the development of fungicide resistance in fungal populations will remain an area of continued research. Disease management methods should entail sensitive molecular testing of suspected fungal isolates for resistance, rotation of products, and monitoring of quiescent infections in transplant materials. Testing and the inclusion of non-chemical methods such as biologicals and biorational treatments especially for soilborne pathogens will also be necessary to make disease management economically feasible and sustainable.

In sustainable agriculture, plant nutrients are the most important elements. Biofertilizers introduce microorganisms that improve the soil nutrients and increase their accessibility to crops. In order to meet the demands of a growing population, healthy crops need to be produced using the right type of fertilizers to provide them with all the major nutrients they require. However, an increasing dependency on chemical fertilizers is destroying the environment and negatively af-fecting the health of humans. Thus, using microbes as bioinoculants as the best replacement of chemical fertilizers as eco-friendly way for plant growth and soil fertility is believed to be the best method for improving plant growth and soil fertility. In sustainable agriculture, these microbes provide significant benefits to crops. In addition to colonizing plant systems (epiphytic, endo-phytic, and rhizospheric), beneficial microbes play a key role in absorbing nutrients from surrounding ecosystems. Plant associate microbes can promote plant growth regardless of natural and extreme conditions. Plant growth promoting microbes promote plant growth through a variety of direct and indirect methods, such as nitrogen fixation, plant growth hormone production, siderophores, HCN, several hydrolytic enzymes, and potassium, zinc, and phosphorus solubilization. Research on biofertilizers has been extensive and even available, which demonstrates how these microbes can deliver nutrients to crops in sufficient quantities to enhance their yield. This review examines in detail the direct and indirect mechanisms of PGPR action and their interaction in plant growth and resistance.

Attack on health has become a significant concern for non-belligerents of war, including healthcare personnel and facilities as witnessed in the ongoing Sudan conflict. About 1.5 billion people living in fragile and conflict-affected settings (FCAS) have a heightened need for essential health services. Conflicts often lead to the disruption of building blocks of health systems, lack of access to health facilities, failure of essential medical supply chains, the collapse of political, social and economic systems, migration of health care workers, and upsurges in illness. While health indicators often decline in conflict, health can also bring peace and harmony among communities. Investment in health systems and health diplomacy is a neutral starting point for bringing peace and mitigating conflicts. The international commitment towards Sustainable Development Goals (SDGs) provides the impetus to emphasize the relationship between health and peace with the amalgamation of SDG 3, SDG 16, and SDG 17. The inspection of how health should be used as a ‘tool for peace’ and not as leverage during the war must be reiterated by international institutions.

The use of botanical extracts of the plant Jatropha curcas (Euphorbiaceae) represents a valuable alternative to control insect pests and avoid the detrimental effects on the environment and health that arise due to synthetic chemical insecticides. Thus, we conducted a systematic review to summarize the published evidence on the bioactivity of J. curcas against insect pests. Electronic databases were searched to identify studies that assessed J. curcas extracts against insect pests in various types of crops. We included 39 articles that reported the insecticidal and insectistatic activity of several botanical extracts from J. curcas against insects of eight different taxonomic orders. The evidence demonstrates that aqueous and methanolic extracts from seeds and leaves, seed oil, and petroleum ether seed extracts were effective against insect pests of stored grains, aphids of cabbage, sorghum, fruit flies, and desert locusts. The extracts caused high mortality, controlled the populations, reduced oviposition, diminished hatchability, and increased the antifeedant effect. However, the type of solvent used to obtain the botanical extract and the method of application (contact or food) are fundamental to increase its bioactivity. Therefore, botanical extracts from seeds and leaves of J. curcas should be considered as an alternative against insect pests and may be incorporated into integrative and sustainable management for insect control.

Offshore electricity production, mainly by wind turbines, and eventually floating PV in the future, will contribute to increase renewable energy production, as well as their dispatchability. The need for that energy evacuation and the implementation of the hydrogen economy are challenges that arise the evaluation of such energy facilities for the direct production of hydrogen. The analysis of the alternatives for the evacuation of offshore renewable electricity for the production of hydrogen is presented. The analysis includes discussion about the current state of the art of hydrogen pipelines and subsea cables, as well as the storage and bunkering system that is needed on shore. The main options for energy evacuation will be via an electric subsea cable to produce hydrogen onshore, or by pipeline, depending on the capacity of the offshore plant. For low capacity, an electric subsea cable is the best option. For high capacity renewable offshore plants, pipelines start to be competitive for distances above aprox. 450 miles.

Since the outbreak of the Covid-19, working from home has become the norm for millions of workers worldwide. The current research focuses on the benefits and challenges of teleworking in the administrative sectors of greek healthcare units, with a view to harnessing the knowledge gained through experience, in order to create the frame for sustainable behaviors. Anyways, the implementation of teleworking requires complex and dynamic changes in technical and behavioral aspects. Therefore, a systematic review was also conducted to identify the relationships between telecommuting and organizational behavior, with the aim of achieving sustainable development in businesses. Moreover, an important positive aspect of telework that emerged from this literature review appears to create opportunities for potential direct or indirect linkages between telework and many SDGs areas, based on the fact that telework appears to be a community-friendly form of work. In summary, this research strongly suggests that leaders facilitate telecommuters to adopt green practices and volunteerism that can consequently contribute to the SDGs. However, in order to meet the challenges arising from unprecedented times, the leaders of the organizations will have to redesign their policies, while the states will have to focus on guaranteeing the rights and freedoms of the workers.

Micromobility has gained attention from policymakers, industry stakeholders, and academia; however, a comprehensive conceptualization of micromobility is still missing. Existing definitions are largely vehicle-centric: either listing modes or detailing vehicle characteristics. This paper addresses this gap by developing a ‘beyond vehicles’, multi-dimensional conceptualization of micromobility, accompanied by a novel socio-technical definition. Through a review of related concepts, combined with an analysis of the use and definitions of the term micromobility in publications, this study establishes a new conceptualization of micromobility. It incorporates human, social, and cultural dimensions, considers environmental, economic, infrastructure, vehicle technology, regulatory and policy aspects, and considerations for public health. Our definition of micromobility encompasses a wide range of mobility options typically used for shorter trips and manoeuvrable by an individual without motor assistance, at least for short distances. These modes are characterized by their ‘micro’ attributes, including low energy demand, environmental impact, and road space use relative to automobility. The conceptualization incorporates a range of micromobility modes, including fully human-powered (including walking), partially motor-assisted, and fully powered options. These modes typically operate at speeds not exceeding 25 to 32 kilometres per hour (or 45 km/h for faster options), weigh (typically substantially) below 350 kilograms and often yield significant (public) health benefits. Trip length is generally less than 15 kilometres, and daily distances under 80 kilometres. Importantly, our definition includes the practices, policies, cultures, and infrastructures that emerge around the use of micromobility options and shape their uptake. This proposed conceptualization significantly broadens the prevailing vehicle-focus in micromobility debates towards a socio-technical perspective. Embracing a widely accepted conceptualisation of micromobility would offer several advantages, including robust design standards, legislation, and evaluation metrics and methods. Additionally, this paper highlights the pivotal role micromobilities can play in transcending the limitations of automobility, towards more sustainable and equitable mobility futures.

Sustainable supply chains have become increasingly crucial to address environmental and social challenges faced by societies worldwide. Last-mile delivery, which involves delivering products from a distribution center or warehouse to the final destination, typically a consumer's doorstep, is an essential component of the supply chain. However, it faces numerous challenges such as traffic congestion, air and noise pollution, and carbon emissions. This research paper explores the viability of last-mile delivery solutions for sustainable supply chains. The study reviews the literature on last-mile delivery challenges, sustainable last-mile delivery solutions, and case studies of sustainable last-mile delivery solutions. The results indicate that innovative last-mile delivery solutions, such as electric vehicles, cargo bikes, and drones, have the potential to reduce environmental impact and improve the efficiency of last-mile delivery while enhancing social equity. Additionally, partnerships between different stakeholders, including governments, logistics companies, and consumers, can contribute to the development of sustainable last-mile delivery solutions. The study concludes that sustainable last-mile delivery solutions are essential to achieving sustainable supply chains and recommends further research to explore the economic feasibility and scalability of these solutions.

This paper aims to explore the development of the field of Intangible Cultural Heritage Design. It seeks to understand the global trends in this field and provide insights for its growth and development. The objectives are achieved through a mixed-methods approach that combines bibliometric methods and content analysis. This approach allows for a quantitative and qualitative analysis of the scientific literature related to Intangible Cultural Heritage Design. The findings of the work include an analysis of the most productive countries/regions, institutions, journals, and authors in the field of Intangible Cultural Heritage Design. It also includes citation and co-citation analysis, which helps identify influential scholars and popular journals in the field, as well as patterns of col-laboration within the field. The outcomes and implications for practice include a better understanding of the global trends in Intangible Cultural Heritage Design and insights for its growth and development. The research find-ings have important theoretical and practical implications for the field, and future research directions are pro-posed. The value of the paper lies in its contribution to a better understanding of the global trends in Intangible Cultural Heritage Design. It provides insights and assistance for its growth and development, mak-ing it valuable to researchers and practitioners in the field.

Forest resources are an important material basis for ecological protection and economic devel-opment, and are responsible for the dual mission of guaranteeing national ecological safety and grain safety. Forest land is an important carrier of forest resources, and forest landowner is a direct component of forest land management. Forest landowners’ willingness to engage in forest man-agement affects whether the important value function of forest resources can be implemented. Are there differences in the willingness and behavior of forest management between ethnic minority foresters and ordinary foresters? How to stimulate the forest management willingness and behavior of forest farmers in ethnic minority areas?These questions will be about the realization of the value of forest resources. Through the analysis of 185 questionnaires in Yunnan Province, this paper clarifies the current situation of forest management of forest farmers in minority areas. Then, using the Sustainable Livelihoods Framework, we select three indicators including the socio-economic at-tributes of individual farmers, the cognition and experience of forest landowners, and policy guidance. And we use the binary logistic regression model to analyze the factors affecting the willingness of forester to participate in forest management. Through the above analysis, we find that: (1) Forest landowners' willingness to engage in forest management in minority regions is relatively high, at 71.98%. (2) Individual farmers’ socioeconomic attributes have the most significant degree of influence on willingness to engage in forest management, while forest landowners' cognitive and related experiences, policy guidance and other related variables influence willingness to engage in forest management at the macro level. (3) Literacy has a significant positive contribution to man-agement intentions, while forest land area, living standard, whether they are compensated by public welfare forest, and whether they participate in the project of returning farmland to forest and grass have a significant negative effect on management intentions. (4) There are significant differences between forest landowners' willingness to engage in forest management and the influencing factors between minority regions and non-minority regions. Finally, we suggest to improve the willingness to engage in forest management and forestry industry development in minority regions through innovative management methods, concentrated and continuous large-scale management, en-couraging capital investment and driving forest landowners to "nearby employment", optimizing the logging quota system and raising the compensation standard for public welfare forests. This study has important practical significance for promoting the realization of forest ecological products value, consolidating the achievement of poverty alleviation in forest areas and realizing rural re-vitalization in China.

Concept sustainable of banking is based on principle realization growth and profit for the bank and shareholders, but only with achievement social goals, as and care for conservation life environment. Providing new ones banking service and creation new ( green ) banking jobs, except for _ profitable, they achieve and spreads social and ecological goals, chances are with creation competitive advantages, both in countries Western Balkans observed in the work, so and in all countries of the world In this one work we will focus on analysis macroeconomic parameters in countries Western Balkans works tests influence selected indicators on performance banking system, with special in retrospect on social and component protection life environment. The results indicate that rate unemployment the most significant indicator potentially risky events for bankers, as and banks they are not recognized in national conservation strategies _ life environment which are in WB countries currently on strength. Accordingly, the former is necessary to carry out education foreign affairs, and in parallel to promote green loans like they live and in the long term more favorable of traditional loans, with update the existing one regulatory frame in the domain protection life environment.

Agroecology is a holistic approach to farming that emphasizes the use of local resources and ecological processes to increase productivity, reduce environmental impact, and enhance resilience. Despite its potential benefits, the adoption of agroecological practices in Sub-Saharan Africa has been slow. This paper examines the opportunities for promoting agroecology in the region, including the growing demand for organic and sustainable food, the availability of local knowledge and resources, and the potential for agroecology to improve rural livelihoods and support climate change adaptation. The premise is that the promotion of agroecology faces several challenges. which include, inadequate policy and institutional support, lack of access to credit and markets, limited extension services, and weak land tenure systems. The paper draws on case studies from across Sub-Saharan Africa to illustrate the opportunities and challenges of promoting agroecology in the region. These case studies highlight the diversity of agroecological practices and the importance of context-specific approaches. Overall, the paper maintains that agroecology has the potential to transform agriculture in Sub-Saharan Africa, but that realizing this potential will require concerted efforts from governments, civil society, and the private sector.

Identifying productive, profitable and less risky cropping systems is important for sustaining farm-based livelihoods in the context of climatic uncertainties and market volatility in many developing nations. Reductionist field crop research identifies the best-bet solutions based on treatment replicates at a single point in time, which may not account for price instability under climatic uncertainties and volatile markets. Keeping this in mind, we estimated productivity, profitability and weather-related risk from eleven different rice-based cropping systems (eight existing and three potential systems) in the coastal region of West Bengal, India. Information on the crop management practices, yield and prices of the component crops of these eleven cropping systems, under ’best,’ ’normal’ and ‘worst’ situations (scenario), were collected through a ques-tionnaire survey on50 farms of Gosaba Block, West Bengal, India. Irrespective of the scenarios, the rice-lathyrus systems, followed by rice-onion and rice-lentil systems recorded the lowest rice-equivalent yields and system yields. However, the highest rice-equivalent yields and system yields were recorded for rice-chilli systems, followed by rice-tomato and rice-potato-green gram systems. Per hectare total paid-out cost (TPC) of rice-tomato systems was higher, followed by rice-chilli, rice-potato-green gram and rice-potato systems. However, irrespective of seasonal conditions (best, normal and worst), rice-chilli systems gave a higher net return followed by rice-tomato and rice-potato-green gram systems. The rice-fallow system recorded the lowest value for both parameters. Under the worst seasonal conditions, the rice-onion system gave a negative net return. Under all the scenarios, the highest B:C ratio was observed for rice-chilli, rice-tomato, rice-potato-green gram and rice-potato systems. The cumulative probability distribution of the rice-tomato system showed first-degree stochastic dominance over other systems and the rice-chilli system showed second-degree stochastic dominance over the rest of the systems. Only the rice-onion system had a small chance (< 1%) of a negative net return, while the rest of the cropping systems were highly likely to get a positive net return. Taking productivity, economics, and risk assessment of different rice-based systems into account, rice-vegetable systems, especially rice-tomato and rice-chilli among the existing systems and rice-potato-green gram system among the potential systems, can be recommended for sustainable intensification in these coastal saline tracts of the region. We also discuss additional socio-economic factors explored by in-depth in-terviews with the farmers, which might influence the adoption and upscaling of these cropping systems in the region.

The COVID-19 pandemic has not only affected public health but has also significantly impacted the economy. Bandung, a bustling city in Indonesia serving as a satellite to the capital, has been hit hard due to its high population density, mobility, and reliance on the tourism, trade, and transportation sectors. Using a Computable General Equilibrium (CGE) model developed at the inter-regional level of Indonesia, this study investigates the microeconomic indicators of several economic activities in Bandung to assess the impact of the pandemic. Additionally, the study examines the role of private sector actors in contributing to the sustainable recovery efforts toward achieving Sustainable Development Goals (SDGs) amidst the pandemic. The findings reveal that Bandung's transportation, accommodation, food and beverage, water supply, and trade sectors experienced a significant decline in economic activity. However, there was a gradual recovery with increased economic activity between 2019 and 2021. Private sector actors and the health sector were the main drivers of economic recovery, with other sectors also contributing to the efforts.

Food security is a matter of global concern, as the supply of food is one of the basic needs, ensuring the survival of the species. The trend of globalization and development of the global economy has shifted the responsible, local consumption patterns towards an increased homogeneity of diets, with food products being disconnected from their source, leading to two major results: (1) increased global consumption, driven by the extensive availability of affordable seasonal foods throughout the year and (2) increased uncertainty in the supply chain – susceptible to disruptions, causing food insecurity. To determine what the nutritional model is in the case of the present study – Romania – we developed a questionnaire of 32 questions and distributed it to 1,053 respondents from Romania. The survey was conducted during 2021 and 2022, both in urban and rural areas with the aim of investigating the consumption pattern of the population. The analysis of the questionnaire data reveals overconsumption of animal products, starchy vegetables and bread and pastry products. This nutritional pattern with a high intake in animal protein, correlated with a lack of diversification, is extremely unsustainable, having a negative impact on human health and environmental health.behaviour towards a careful approach to food, environment and personal health, aims to identify consumption patterns that have the potential to increase the sustainability of the food system and a positive correlation with food security. Adopting sustainable dietary patters, based on short supply chains and mindful consumption, has great potential in restoring food security and resilience to adversity.

Micro-level language policy and planning (LPP) primarily concerns local actors' decision-making on matters in relation to language(s) and its users. Despite a growing body of literature focusing on micro language planning in educational settings, there is a scarcity of research examining early childhood education settings such as micro-level LPP context for young English language learners. By adopting a case study approach, the present study examined the educators' enactment of agency in micro-planning the English language education policy (LEP) in one Chinese kindergarten and the associated factors shaping their agency. Our study revealed that the sustainable implementation of the kindergarten English LEP depended on the principal, native English-speaking teachers, and the Chinese assistant teachers' different degrees of agency. Also, the research findings indicated an array of contextual and individual factors nested in a hierarchical structure that facilitated, guided, and constrained the educators' agency in a role-and circumstance-dependent manner. This study contributes to the pertinent literature by casting nuanced light on the different educators' contributions to the micro-level LPP against a national policy that does not endorse early-year English language education.

Food security is a matter of global interest, as the provision of food resources is the primary determinant of human existence. Food is one of the basic needs, ensuring the survival of the species. The trend of globalization and development of the global economy has shifted the responsible local consumption patterns to an increased homogeneity of diets, food products being disconnected from their source. This disconnection led to two major results: (1) increased global consumption, with seasonal foods now available throughout the year, and a decrease in food prices on the global market, and (2) increased uncertainty in the supply chain, susceptible to disruptions, as was the case during the Covid-19 pandemic. The present study, based on the research and analysis of third-party data on food security, sustainable diets, consumption patterns and recommended actions to change the current unsustainable consumer behaviour towards a careful approach to food, environment and personal health, aims to identify consumption patterns that have the potential to increase the sustainability of the food system and a positive correlation with food security. Adopting sustainable dietary patters, based on short supply chains and mindful consumption, has great potential in restoring food security and resilience to adversity.

Sustainability is pivotal in the urban transformation strategy in order to reach more resource-efficient, resilient and smarter cities. The goal of being a sustainable city should drive the decisions for city interventions. Nonetheless, impacts need to be quantified, lacking of standard and/or common methodologies that could be replicable across multiple cities. There exist many initiatives aiming at defining indicators and assessment procedures, but without convergence in the definition of terms and application methodologies, making complex its real implementation. Within mySMARTLife project (GA#731297), a KPI-driven evaluation framework is defined with the aim of covering the multiple pillars of a city (i.e. energy, mobility, citizens, economy) in a holistic way. This methodology also defines the concepts and terms to guide urban planners and/or experts at time of implementing the framework in a specific city. The evaluation framework has been deployed in the three cities of Nantes, Hamburg and Helsinki and some lessons learnt have been extracted, such as the necessity of providing a definition of measurement boundary to avoid interpretations. Thanks to a co-creation strategy, the main difficulties and issues from the cities have been taken into consideration for increasing the replicability.

Attracting and retaining international students has been widely discussed in higher education settings. Increasing the number of international students has become an indispensable strategy for national and global competition. This study focuses on effective strategies and international students' issues regarding satisfaction in the most popular STEM (science, technology, engineering, and mathematics) programs. We designed a structural equation modeling (SEM) method to determine the effect of institutional mediation between push factors and satisfaction factors for the development of better strategies by which to attract and retain international students. Taking Taiwan as an example, this study employed a self-designed questionnaire to collect data: 485 degree-seeking international students in STEM programs were invited and successfully participated in this study during spring 2021. IBM SPSS 26 and AMOS 26 (Analysis of Moment Structure) were used to carry out the data analysis. We employed reliability, factor, and SEM analyses. This study assumed that the impact of push factors can be modified by institutional situations and result in international students’ satisfaction with their learning and environment and regarding migration policy. The results revealed that the predictors, mediation, and criteria were significant at the 0.05 or 0.01 levels. The findings suggest that push factors impact international students’ satisfaction when using institutional leadership and international strategy. The results of the bootstrap with a generalized least square method showed that the SEM model fit in 2000 bootstrap samples. The effect of institutional mediation can provide useful information for STEM programs to boost their future recruitment and retention strategies. This study provides an innovative approach to the detection of issues among international students in specific programs. These findings can enrich our knowledge regarding attracting and retaining global students in higher education settings.

Social Economy institutions seek to provide answers to social problems, given that they naturally have a socially responsible mission. This study aims to answer the research question: how sustainable practices, namely environmental behaviour, have been adopted by Portuguese Private Social Solidarity Institutions (IPSS) with the purpose of contributing to Sustainable Development? To achieve this objective, qualitative research was carried out in 31 IPSS, which was framed within the scope of the TFA project (Theoretical framework for promotion of accountability in the social economy sector: the IPSS case). Semi-structured interviews were conducted, with a script based on the literature review, from May to July 2019, with those responsible for the management of these entities. A content analysis was conducted, using the NVivo12 Version 12.6.0 software, which enables data to be coded and categorised, reducing any researcher bias. The results indicate that most entities carry out activities of an environmental nature, related to the reuse of materials, the recycling of waste, the sale of materials for recycling, and user awareness. Several entities expressed financial limitations to the implementation of Environmental Management Systems and their accomplishment. However, the objections presented are not impossible to overcome, according to studies presented in other countries.

Increasing agricultural productivity is indispensable to meet future food demand. Crop im-provement programs rely heavily on genetic diversity. The success of weeds in the ecosystem can be attributed to genetic diversity and plasticity. Weedy rice, a major weed of rice, has diverse morphology and phenology, implying wide genetic diversity. Study was conducted to genotype weedy rice accessions (n =54) previously phenotyped for herbicide tolerance and allelopathic potential using 30 SSR markers. Cultivated rice (CL163, REX) and allelopathic rice (RONDO, PI312777, PI338047) were also included in the study. Nei’s genetic diversity among weedy rice (0.45) was found to be higher than cultivated rice (0.24) but less than allelopathic rice (0.56). The genetic relationship and population structure based on herbicide tolerance and allelopathic po-tential were evaluated. Herbicide-tolerant and susceptible accessions formed distinct clusters in the dendrogram, indicating their genetic variation, whereas no distinction was observed between allelopathic and non-allelopathic weedy rice accessions. Weedy rice accession B2, which was previously reported to have high allelopathy and herbicide tolerance, was genetically distinct from other weedy rice. Results from the study will help leverage weedy rice for rice improvement programs as both rice and weedy rice are closely related, thus having a low breeding barrier.

There has been a steady rise in the recognition of menstrual hygiene management (MHM) as a pressing public health issue due to several advocacy campaigns against its high cost. However, not much of such recognition has been given to it outside the non-profit sector in Nigeria. This is paradoxical considering that most menstruators in Nigeria cannot afford MHM whose cost is considered high even in developed countries. We estimated that the average lifetime cost of MHM in Nigeria is US$1,122.3 per menstruator and US$113.58 billion for the entire menstruating population. Although this cost is relatively lower than in other countries, Nigeria’s low-income level explains why there is a high prevalence of period poverty among menstruators in Nigeria. This commentary highlights the intersected impacts of the cost of MHM and period poverty on the average Nigerian menstruator, his/her family, the economy, the environment and the United Nations Sustainable Development Goals. To alleviate the discussed negative effects, we suggested, as a key recommendation, the national shift from the use of disposable MHM products to that of reusable ones.

Unmanned aerial vehicles (UAVs)-based communication system is a promising solution to meet coverage and capacity requirements of future wireless networks. However, UAV-enabled communications is constrained with its coverage, energy consumption, and flying regulations, and the number of works focusing on the sustainability aspect of UAV-assisted networking has been limited in the literature so far. In this paper, we propose a solution to this limitation; particularly, we design a $Q$-learning-based UAV positioning scheme for sustainable wireless connectivity considering key constraints, that are, altitude regulations, non-flight zones, and transmit power. The objective is to find the optimal position of the UAV base station (BS) and minimize the energy consumption while maximizing the number of users covered. Moreover, a weighting mechanism is developed, where the energy consumption and number of users covered can be prioritized according to network/battery conditions. The proposed Q-learning-based solution is compared to the baseline k-means clustering method, where the UAV BS is positioned at the centroid location that minimizes the cumulative distance between the UAV BS and the users. The results demonstrate that the proposed solution outperforms the baseline k-means clustering-based method in terms of the number of users covered while achieving the desired minimization of the energy consumption.

This article investigates the prospect of implementing multidisciplinary and multicultural student teamwork (MMT) involving Case-based Learning (CBL) and Problem-based Learning (PBL) as a sustainable teaching practice. Based on a mixed methods approach, which includes direct observation (both physical and virtual), questionnaire distribution and focus-group interviews the study reveals that MMT through CBL and PBL can both facilitate and hinder sustainable learning. Our findings show that while MMT enhances knowledge sharing, it also poses a wide range of challenges, raising questions about its social significance as a sustainable teaching practice. The study suggests the implementation of certain mechanisms, such as ‘Teamwork Training’ and ‘Pedagogical Mentors’, aiming to strengthen the sustainable orientation of MMT through CBL and PBL.

Both academic literature and global organizations have emphasized the need for responsible water consumption, as stated in the Sustainable Development Goal 12. However, individuals’ water-saving behaviors in their current state are not enough. This situation entails a resistance to change (RC) in consumer habits and a lack of perceived risk of scarcity. The novelty of this study lies in examining the influence of RC (through its emotional, cognitive, and confidence components) and perceived risk on water-saving intention. Interviews (n = 384) were conducted in the southeast Mediterranean area of Spain by interviewers using a paper-and-pencil questionnaire. The results of the structural equation modeling show that the perceived risk and the components of cognitive rigidity and negative emotions exert a direct influence on water-saving habits and an indirect influence on water-saving intention. None of the components of RC directly influence intention, and a lack of confidence in the outcomes of water saving does not influence water-saving habits or water-saving intention. In addition to the results obtained, the novelty of the work lies in the idea that in order to influence the perception of the risk of water scarcity through awareness campaigns, it is better to use an emotional message rather than showing facts or information, because this does not drive water saving behavior.

The use of active methodologies in the university is a priority to achieve higher quality learning. One of these methodologies with the greatest potential for training in competencies is Project-Oriented Learning (PLA), using it in an innovative way. Associating the use of this methodology with the objectives of sustainable development, which have become even more important since the Pandemic by COVID-19, can be a good idea to achieve a more sustained and situated learning. The aim of this study is to find out to what extent research on teaching innovation with Project-Oriented Learning is associated with the Sustainable Development Goals. A systematic review was carried out as indicated by PRISMA through the following databases: WOS and Scopus. WOS found 15 articles on AoP and 6 on Project-Oriented Learning and sustainability. In Scopus 2 were found in 2019. The main results show that in the University, especially in the branches of engineering, AoP is widely used, however, it is rarely related to SDGs. Among the conclusions, we highlight the need for research on project-oriented learning and sustainable development goals.

This study investigated the efficacy of advanced oxidation process (AOP) for the reduction of pollution loads in mixed agro-food industrial wastewaters (dairy and slaughterhouse) in Nablus city, Palestine. Bench-scale Jar tests using an advanced oxidation process (AOP) were performed as a pretreatment stage. Initial results on direct applications of Fenton’s process on mixed agro-food wastewater (COD: 15400-18200 mg/l) were unsatisfactory. Hence, the performance of the Fenton process was applied on three mixed wastewater samples with different pre-treatment trials: (A) coagulant (FeCl3.6H2O) addition, (B) settling (2h), and use of flocculent (lime Ca(OH)2) in sample (C). Preceded with lime, Fenton`s process (Sample C) was most effective in the removal of organic carbon and nitrogen (89% COD; 80% TKN). The removal efficiency in inorganic loads (91% TSS; 62% TS) were achieved under H2O2/COD (w/w ratio 2:1), H2O2/Fe+2 (w/w ratio 10:1) and acidic conditions (pH = 3). The adoption of AOP technology by agro-food industries could ensure compliance with municipal by-laws and acquire connection permits to sewerage networks.

In rural Zimbabwe, selling of cattle has for a long time been one of the most dependable sources of income that has sustained livelihoods for decades. Informal cattle marketing which involves door to door or gate sales has been the most predominant system for the last three decades. However, the outbreak of the global COVID-19 pandemic followed by the imposition of lockdowns has exposed the vulnerability of rural communities that are regressing into poverty due to a lack of alternative sources of income. The aim of this paper is, therefore, to delineate how formal cattle markets could be used as a sustainable source of income for rural communities’ livelihoods during and post the COVID-19 pandemic era. This qualitative research study relied on secondary data from published journal articles, online publications, and reports to understand the COVID-19 pandemic and also understand how it has impacted the livelihoods of people in rural Zimbabwe. The findings show that the current informal cattle marketing system is no longer suitable for rural communities as it exposes them to infections due to the challenges in ensuring compliance with the World Health Organisation (WHO) precautionary measures. It is recommended that formal (public) cattle markets be reintroduced in all rural areas as there is the certainty that WHO health guidelines will be enforced since they are organised by local and central government institutions. Since formal cattle markets offer competitive market-related prices this will then guarantee the flow of regular income thereby reducing the vulnerability of rural communities to poverty and inequalities.

Information and Communication Technology (ICT) is at the heart of the Smart City approach, which constitutes the next level of cities’ and communities’ development across the globe. Thereby, ICT serves as the gluing component enabling different domains to interact with each other and facilitating the management and processing of vast amounts of data and information towards intelligently steering the cities infrastructure and processes, engaging the citizens and facilitating new services and applications on various aspects of urban life - e.g. supply chains, mobility, transportation, energy, citizens’ participation, public safety, interactions between citizens and the public administration, water management, parking and many other use cases and domains. Hence, given the fundamental role of ICT in cities in the near future, it is of paramount importance to lay the ground for a sustainable and reliable ICT infrastructure, which can enable a city/community to respond in a resilient way to upcoming challenges whilst increasing the quality of life for its citizens. This paper constitutes a continuation of a series of research documents and standardization activities, which relate to the concept of Open Urban Platforms (OUP) and the way they serve as a blueprint for each city/community towards the establishment of an ICT backbone. Thereby, the current paper emphasizes on the aspects of sustainability and resilient ICT, whilst reporting on our latest activities and related developments in the research area.

The European Union green deal has proposed the “organic farming action plan” to render this farming system more sustainable for climate mitigation and adaptation and to meet the United Nations Sustainable Development Goals (UN-SDGs). While this policy instrument is fundamental to reach sustainable agriculture, there is still no agreement on what sustainable agriculture is and how to measure it. This opinion paper proposes an ecosystem-based framework on the crop life-cycle to determine the balance between economic, social and environmental pillars of sustainability to support decision-making.

The present research is embedded in the professional development and research line and in the needs of secondary education and first-year university teachers. We focussed on evidencing the importance of teachers’ professional training to include some specific adaptation and skills in intercultural dialogue and understanding -often called Intercultural Competence- because of its direct impact on the sustainable development of human beings, groups, and ecosystems. We investigated the role played by each of the main competencies linked to the following intercultural dimensions: Professional Identity, Ethics and Axiology, Methodology, and Inclusive Education. We used an integrated methodology and a cross-study of data, performed after the obtention of a three-cornered evaluation of results collected in focus groups, interviews, and questionnaires. We were able to show the impact of intercultural dialogue and understanding in the education for a sustainable development pattern. This is fundamental to set up a new ecology of forms, knowledge, attitudes, and educational meanings, further used to update teachers and students’ training in sustainable ecology and cultural diversity. Progress made in these complementary competencies -Professional Identity, Ethics and Axiology, Methodology- were appraised by teachers participating in the present study; the latter showing an increased interest and demand for the intercultural competence, after increasing their proficiency in the other complementary competencies.

Phosphorus (P) is the second-most important element after nitrogen that is required for plant growth. Although this element is abundant in most soils, it is rarely available in plant-accessible forms since most of it normally exists in soil in insoluble forms such as phosphates. In conventional agriculture, P is normally supplied as chemical fertilizer to satisfy plant P requirements. This, to a large extent, boosts plant production. However, chemical fertilizers are costly, have a huge carbon footprint, and are environmentally-unsustainable owing to the high energy requirements during their synthesis. Besides, P-containing agricultural run-offs contribute hugely to the eutrophication of water bodies and environmental degradation. Moreover, plants can consume only a small amount of chemically-supplied P since between 75 and 90% of this form of P normally get precipitated into complexes and rapidly become fixed in soil. These issues and concerns necessitate research into alternative and viable ways of supplying P to plants. Rhizobacteria have for decades been investigated in vivo and in planta as suitable tools in sustainable agriculture due to the plant-growth-promoting activities such as nutrients’ solubilization, nitrogen fixation, and production of phytohormones. Although a lot of research has been done on different nutrients-solubilizing rhizobacteria and their potential in sustainable agriculture, their mechanisms of action and prospects in sustainable agriculture remain to be fully understood. This review particularly focuses on the P solubilizing rhizobacteria and evaluates their diversity, mechanisms of action, and prospects in sustainable agriculture based on the present and future scenario of their application. Such information is useful in determining their potential and evaluating their prospects in promoting sustainable agricultural systems.

The COVID-19 pandemic is adversely impacting food and nutrition security and requires urgent attention from policymakers. Sustainable intensification of agriculture is one strategy that attempts to increase food production without adversely impacting the environment, by shifting from water-intensive crops to other climate-resistant and nutritious crops. This paper focuses on the Indian state of Andhra Pradesh by studying the impact of shifting 20% of the area under paddy and cotton cultivation to other crops like millets and pulses. Using FAO’s CROPWAT model, along with monsoon forecasts and detailed agricultural data, we simulate the crop water requirements across the study area. We simulate a business-as-usual base case and compare it to multiple crop diversification strategies using various parameters – food, calories, protein production, as well as groundwater and energy consumption. Results from this study indicate that reduced paddy cultivation decreases groundwater and energy consumption by around 9-10%., and a calorie deficit between 4-8% - making up this calorie deficit requires a 20-30% improvement in the yields of millets and pulses. We also propose policy interventions to incentivize the cultivation of nutritious and climate-resistant crops as a sustainable strategy towards strengthening food and nutrition security while lowering the environmental footprint of food production.

Increased construction activities in Australia have led to the generation of a massive volume of construction and demolition (C&D) waste annually. Management of this volume of waste requires an effective waste framework. The literature reported that the current Australian waste framework does not meet expectations and needs immediate improvements. This study was therefore conducted to seek the key C&D stakeholders' opinion about various issues identified in this waste stream. The specific objectives of this study are identification of the main barriers to effective C&D waste management, the impact of current regulations and opportunities to enhance the current C&D waste management system. A survey was conducted in 2019 to capture the stakeholders' perception. 132 participants from various industries and government agencies based in various Australian jurisdictions took part in the survey. The key results showed that the main barriers towards an effective management system are "overregulation, tough acceptance criteria, and increased testing requirements", "lack of local market" and "culture, poor education and low acceptance". Furthermore, a low number of participants indicated that the current legislation encourages waste recovery activities. The main areas of improvements included "providing a guideline that determines the accepted level of contamination for reusing C&D waste”, "preparation of guidelines on requirements of using recycled C&D materials in different industries" and "setting target for reduction, reusing, and recycling C&D waste". The results can inform policy development and be used as evidence for a broader discussion to solve lasting issues in C&D waste management.

In the achievement of the Sustainable Development Goals (SDGs), education plays a fundamental role. However, traditional methodologies do not favor the enrichment and personal development essential to promote global awareness. The use of active methodologies based on experiences improve the quality of learning. This work describes the design, implementation, and evaluation of the acquired knowledge of a didactic proposal for non-formal education as a support for regulated education based on botany content. Firstly, a workshop was held, where young people participated directly in developing field work with a real scientific methodology. Subsequently, a group of students was chosen to be interviewed to obtain a global vision of the learning they obtained. The motivation of the students was quite positive, which allowed us to obtain voluntary participation in the field work and gave the students a participative attitude throughout the development of the workshops. Four months later, this positive attitude remained during their direct involvement in various activities, and the students still remembered the fundamental content discussed. Relating the didactic proposal to its immediate environment was shown to increase interest in learning and value in its own context. The results of this educational experience have been very positive, as knowledge was acquired, and interest in the preservation of the environment and the profession of a researcher was promoted.

Because of the significant enabling role smart meters can play in securing the transition towards sustainable energy distribution, the paper provides insights to support smart meters implementation projects. Energy utilities must propose adequate solutions to manage grid-upgrading projects and, in the meantime, increase efficiency levels. Based on empirical data analysis the paper provides insights aimed at maximize probability of success of smart meters projects. Results show common patterns of variables that may support project undertakers, policymakers and scholar when it comes to analyze projects to predict to maximize opportunities. For smart meters projects to succeed, regulatory stability is essential as long-period investments grids produce benefits for energy utilities, and for society.

Despite their limited spatial extent, freshwater ecosystems host remarkable biodiversity, including one third of all vertebrate species. This biodiversity is declining dramatically: globally, wetlands are vanishing three times faster than forests and freshwater vertebrate populations have fallen more than twice as steeply as terrestrial or marine populations. Threats to freshwater biodiversity are well- documented but co-ordinated action to reverse this decline is lacking. We present an Emergency Recovery Plan to “bend the curve” of freshwater biodiversity loss. Priorities for action include: 1) accelerating implementation of environmental flows, 2) improving water quality, 3) protecting and restoring critical habitats, 4) managing exploitation of freshwater species and riverine aggregates, 5) preventing and controlling non-native species invasions, and 6) safeguarding and restoring river connectivity. We recommend revised targets and indicators for the Convention on Biological Diversity and the Sustainable Development Goals, and investment in enabling conditions at national, river basin and local scales.

High maternal mortality in the developing countries, particularly in Nigeria, poses serious challenge to achieving the maternal mortality target of the Sustainable Development Goals (SDGs) in the countries. Hence, there is need for multifaceted approach to curtailing the scourge. Women being the victims of maternal mortality, this study finds the effect of their household decision making power in reducing maternal mortality. The study used data from the 2013 Nigeria Health and Demographic Survey (NDHS) and logistic regression model to explore the relationship between women household decision making power and maternal mortality in Nigeria. The finding shows that women who decide and participate in household decision on own health, major purchases and visit to family and relatives were 35% (OR = 0.65, 95% CI: 0.52, 0.83), 27% (OR = 0.73, 95% CI: 0.57, 0.92), and 37% (OR = 0.63, 95% CI: 0.50, 0.80) less likely to experience maternal mortality, respectively, compared to those whose husbands alone decide. Women household decision making power is therefore instrumental to reducing maternal mortality. It is thus important for policy makers, particularly in Nigeria, to pay more attention to social and cultural factors that surround women household decision making ability for speedy reduction in maternal deaths.

The growth of sustainable apparels provides grounding for the emergence of a new consumer market. Surprisingly, this movement has not only taken place in developed countries but also in emerging countries. To the best of the authors’ knowledge, no systematic reviews have been carried out on sustainable apparels, focused specifically on emerging countries. The goal of this systematic review is to analyse the existing literature on various factors that influence sustainable apparel consumption in emerging countries, as well as presenting future research directions. This detailed literature review is guided by the PRISMA Statement (Preferred Reporting Items for Systematic reviews and Meta-Analyses) review method, and its searches encompass sources such as Web of Science, Scopus and Google Scholar databases which, in result, identified 19 related studies. Furthermore, the reviewers segregated the factors into four major domains which include value, subjective norm, perceived behavioural control and knowledge. The results of this review demonstrate that most customers in the emerging countries have already experienced a growing interest in sustainable apparel with a strong development of knowledge, great concern, values and social circle. In sum, this systematic literature review provides an insightful information about sustainable apparel purchase behaviour and helps academicians, manufacturers and retailers to position and market their sustainable clothing brands.

Can ‘restoration and therapy in design’ signify something more than the places like hospitals and healing gardens? Can those restorative environments be brought inside the working and living environments to mitigate the psychological problem at the source? The main objective of this paper is to look at the strategies and developments of Biophilic design with respect to therapy and restoration in order to achieve sustainability in terms of quality of life within the immediate built-environment. The paper explores the mental health issues under the domains of built-environment and indoor environment with respect to their connection with nature. Biophilic design has gained a favourable momentum within the last four decades and is now visualised as a medium that bridges the gap between humans and the nature. Out of a variety of measures of sustainable environmental design, biophilic design focuses on the end-results of naturally nurtured or inspired habitats and workplaces. It embodies strategies of Green and Intelligent buildings, works as a mitigation strategy for foul indoor environment and establishes the vision that veristic sustainability can only be achieved if there is qualitative control over human physiological prosperity and psychological health. In context of work efficiency, preference and productivity within the indoor environment, it is seen as a promoter of constructive thoughts and enhancer of creativity. The paper aims to enlist biophilic design and retrofitting strategies, which can improve cognitive function, reduce stress and provide mental peace within the built environment.

The aim of this paper is to analyze the real impact of ICT skill mismatch on SME’s sustainable competitiveness in presence of minimum wage guaranteed. As part of public policies – the minimum wage need to maintain a balance between increasing employment and not being a burden for the companies, leading them to bankruptcies, especially in times of disruptive change in which economy have to be more resilient. The rapid progress in information and communication technologies has dramatically redefined the rising unemployment as a result of skills mismatch. This paper aims to understand, on one side if, there is a match between the supply demand of ICT skills and how increasingly powerful digital technologies affect skills, jobs, and the demand for human labour. On the other, if increasing productivity and a fair minimum wage could be an integrated approach in stimulating SME’s in increasing sustainable competitiveness.

The article discusses the issue of the sustainable development of the cross-border market for cultural services in a city divided by the state border. The article uses the example of Cieszyn and Český Těšín, a city divided following the decision of the Council of Ambassadors in 1920. The research carried out so far indicates the main constraints in the harmonious functioning of the cross-border market for cultural services in this city, such as: different cultural policies implemented on both sides of the city, language barriers as well as legal and administrative differences. Therefore, the authors undertook research aimed at recognising the role of Euroregional structures in stimulating the sustainable development of this region. On the basis of the analysis of the Cieszyn Silesia Euroregion's documentation and the results of qualitative and quantitative research, the article describes the role of the Euroregion in building a cross-border market for cultural services. Recommendations were also prepared that could constitute the principles of a common cultural policy not only for Cieszyn and Český Těšín, but also for other European cities in the Schengen Area, which, like Cieszyn and Český Těšín, have been divided by a state border.

According to the characteristics of the sustainable development of subway traffic, the establishment process of an evaluation index system is determined, and the evaluation method and basis are defined. The evaluation index system is established from the aspects of subway traffic sustainability, economic sustainability and urban coordination sustainability. The comprehensive evaluation method of the analytic hierarchy process (AHP) model is used to calculate the weights of comprehensive evaluation indexes at each level. Finally, the sustainable development model of Shijiazhuang subway traffic is evaluated. The results show that the proposed evaluation system and model reflect the degree of sustainable development of subway traffic and can be used for reference in the evaluation of regional subway traffic sustainable development.

The sustainability of agriculture depends as much on the natural resources required for production as it does on the stakeholders that manage those resources. It is thus essential to understand the variables that influence the decision-making process of agricultural stakeholders to design educational programs, interventions, and policies geared towards their specific needs, a required step to enhance agricultural sustainability. We examined the perceptions, experiences, and priorities that influence management decisions of five major groups of agricultural stakeholders (conventional small grain producers, organic small grain producers, organic vegetable producers, extension agents and agro-industry crop consultants, and researchers) across the Montana, United States. Results revealed that while stakeholder groups have distinct perceptions, experiences, and priorities, there were similarities across groups. Specifically, organic vegetable and organic small grain producers showed similar responses that were, in turn, divergent of conventional producers, researchers, and crop consultants. Conventional small grain producers and researchers showed overlapping response patterns while crop consultants formed an isolated group. Our results reinforce the need for agricultural education and programs that address unique and shared experiences, priorities, and concerns of multiple stakeholder groups. This study endorses the call for a paradigm shift from the traditional top-down agricultural extension model to one that accounts for participants’ socio-ecological contexts to facilitate the adoption of sustainable agricultural systems that support environmental and human wellbeing.

As the necessity for safety and aesthetic of nightscape have arisen, the importance of nightscapes (i.e., nighttime landscape) planning has garnered the attention of mainstream consciousness. Therefore, this study is to suggest the guideline for nightscape planning using electroencephalography (EEG) technology and survey for recognizing the characteristics of a nightscape. Furthermore, we verified the EEG method as a tool for landscape evaluation. This study analyzed the change of relative alpha power and relative beta power and self-reporting of participants in order to investigate the correlation between EEG and fear according to twelve nightscape settings. Our findings indicated the corresponding measures of fear vary accordance with whether there was people or not, and the environmental settings (Built Nightscape Images; BNI vs Natural Nightscape Images; NNI). Based on our physiological EEG experiment, we provided a new analytic view of the nightscape. The approach we utilized enables a deeper understanding of emotional perception and fear among human subjects by identifying the physical environment which impacts how they experience nightscapes.

Green ICT has received significant attention in organizations to reduce global warming since last decade. Several maturity models have been proposed for tracking green ICT practices in organizations. Current literature shows that SMEs around the world try to follow some common strategies such as virtualization, consolidation of devices, energy efficiency and disposal of ICT equipment for greening ICT. The increasing interest for green ICT practices in organizations is not only due to the desire to attain environment-friendly atmosphere but mainly because of sustaining business goals such as cost reduction, competitive advantages and stakeholders’ pressure. Nevertheless, due to the lack of green ICT knowledge, organizations, specially SMEs, tend to ignore those practices. Therefore, this research proposes a framework that provides combination of existing green and sustainable ICT maturity models by mapping them with the strategies the businesses are already following. Out of this framework, a web application has been developed that provides questionnaire for SMEs to identify their present situation of green ICT practices and guidelines for improvement. The results have been analyzed by testing the application in some SMEs of Finland and Bangladesh. Finally, a survey has been conducted to attain SMEs’ perception about the possibility of sustainable development of businesses through this application.

The practice of collecting, treating and management of solid waste prior to disposal has become a necessity in developing and modern societies. Over the years, it is known that most wastes that are disposed have a second hand value. However, the construction cost for conventional Material Recovery Facility(s) (MRFs) has been a major barrier for implementation. These technologies require considerable technical expertise, which is often not available in developing nations to successfully operate the MRFs. Covenant University; a private mission institution through her waste to wealth scheme is focused on managing and processing used materials to reusable products. These include Pet bottles, Paper wastes, Food wastes from cafeteria, plastic food packs, nylon, tin cans and others. Specific areas chosen for the Survey include the residential areas for staff and students and the two cafeterias. The waste generated was characterized based on the waste stream so as to quantify the amount of recyclable waste generated and most occurring. The survey involved the use of structured questionnaires, on-site observations and measurements. The study reveals an average amount of recyclable waste generated per day in the institution as 13.46% pet bottles, 4.03% paper, 55.56% food waste, 12.64% plastic, 9.63% nylon and 4.68% tin cans. The study established that adequate waste characterization is a requirement for effective integrated solid waste management which would boost resource recovery, reuse and recycling.

An imperative challenge emerges from the demand to construct a scientific method to recent agricultural and rural policies throughout the world. The objective of the present study is to conduct an ex-post quantitative evaluation of the Comprehensive Rural Village Development Project, a representative rural development project operated by the Ministry of Agriculture, Food and Rural Affairs, a central government agency in South Korea. The primary purpose of the project is to ensure sustainable rural society. This study found a moderate but significant positive impact of the policy in enhancing the standard of living in rural areas. The present study concludes with suggesting some policy implications and future directions of policy evaluation studies.

Building more energy efficient and sustainable urban areas that will both mitigate the effect of climate change and adapt for the future climate, requires the development new tools and methods that can help urban planners, architect and communities achieve this goal. In the current study, we designed a workflow that links different methodologies developed separately, to derive the energy consumption of a university school campus for the future. Three different scenarios for typical future years (2039, 2069, 2099) were run as well as a renovation scenario (Minergie-P). We analyse the impact of climate change on the heating and cooling demand of the buildings and determined the relevance of the accounting of the local climate in this particular context. The results from the simulations showed that in the future there will a constant decrease in the heating demand while for the cooling demand there will be a significant increase. It was further demonstrated that when the local climate was taken into account there was an even higher rise in the cooling demand but also that the proposed renovations were not sufficient to design resilient buildings. We then discuss the implication of this work on the simulation of building energy consumption at the neighbourhood scale and the impact of future local climate on energy system design. We finally give a few perspective regarding improved urban design and possible pathways for the future urban areas.

This research contributes to the overall debate on education for sustainable development (ESD) by shed- ding lights on the contributing role of formal education to the contemporaneous dynamics of literacy, labor market participation and poverty reduction in Africa, with a focus on Burkina Faso. The study uses a semi-parametric recursive trivariate probit modeling approach, and data from the 2014 National Survey on Household Living Conditions in Burkina Faso. The results show that the embraced systemic approach in this analysis is statistically signicant as shown by the 95% condence intervals on the three correlation coeffcients in the model. Furthermore, education does improve literacy skills, however improved literacy skills in itself does not guaranty active labor market participation in Burkina Faso. Active labor market participation seem to be affected by labor market rates of return, and individual reservation wage (or income). When labor market rate of return is short of high literacy skilled individuals' reservation wage, then the natural response is a choice of inactivity in the labor market, by the later group. Simultaneously however, it is found that active labor market participation leads to poverty reduction; therefore, in addition to new industrial policies for structural transformation of the economy, policy makers in Burkina Faso should consider education and minimum wage reforms to give highly literate household members the incentive to be active in the labor market.