This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

Surimi-based products occupy an important position in the aquatic product processing industry. To enhance the quality and flavor of surimi-based products, the effects of pre-emulsified safflower seed oil on the texture, water-holding capacity (WHC), microstructure, and flavor of Nemipterus virgatus surimi gel was evaluated. The texture and whiteness of gel were improved, and the WHC increased (P < 0.05) as the content of safflower seed oil increased up to 2 mL per 100 g surimi. Furthermore, the drops of pre-emulsified safflower seed oils with an average diameter of less than 0.10 μm were evenly distributed in gel matrix. Microstructure and infrared spectroscopy analyses indicated that low-content pre-emulsified safflower seed oil acted as filler particles to occupy void spaces, resulting in gel exhibiting a dense network structure. Volatile analysis showed the gel containing pre-emulsified oil enriched volatile compounds, mainly resulting from oxidation and decomposition of oils by the activation of lipoxygenase, which synergistically contributes to unique flavors of gel. Consequently, low-content pre-emulsified safflower seed oil can used to enhance the quality and flavor of N. virgatus surimi-based products. These findings are especially relevant to the current growing interest in low-fat and high-protein diets.

This study aimed to obtain and characterize extracted hemp oil enriched in cannabidiol (CBD) by decarboxylation of cannabidiolic acid (CBDA) and to give new insights into its antioxidant and anticancer effects. Optimization of CBDA decarboxylation in hemp oil was performed, and CBD and CBDA contents and purities were determined by “flash chromatography”, 1H- and 13C-NMR. The antioxidant properties of CBD-enriched oil were investigated by Fe2+ chelating activity, Fe3+ reducing antioxidant power assay, O2− scavenging activity, HO− scavenging ability and lipid peroxidation inhibitory assay and its cytotoxicity, apoptosis- and oxidative stress-inducing effects on NHDF, MeWo, HeLa, HepG2 and HOS cells were determined. The CBD concentration in hemp oil was increased by CBDA soft decarboxylation optimized at 90°C, for 1 h and resulted oil was capable of reducing iron, scavenging free radicals, and inhibiting lipid peroxidation in cell-free oxidative conditions. CBD-enriched oil promoted NHDF proliferation at up to 15 µg CBD/mL, while inducing apoptosis and ROS production and modulating antioxidant enzymes’ gene expression in cancer cells, being selective for osteosarcoma cells and induced apoptosis by p53- and ROS-independent mechanisms. CBD-enriched hemp oil demonstrated antioxidant properties in oxidative conditions and promoted normal fibroblasts’ proliferation, while inducing apoptosis and ROS production in cancer cells.

Nanoparticles have been proposed for enhanced oil recovery (EOR). The research has demonstrated marvelous effort to understand the mechanisms of nanoparticles-EOR. Nevertheless, gaps still exist in terms of understanding the improved fluids and fluid-rock interactions by nanoparticles, which are the key driving forces for oil mobilization. This paper investigates four types of polymer-coated silica nanoparticles as additives for water flooding oil recovery in water-wet reservoirs. A series of flooding experiments were performed with nanoparticles at 0.1 wt.% in seawater at ambient conditions. The dynamics of fluids, fluid-rock interface interactions and fluid flow behavior were characterized in order to understand oil recovery mechanisms of nanoparticles. Experimental results showed an increase in oil recovery up to 14.8%-point with nanofluid injection compared to an average of 40% of the original oil in place (OOIP) obtained from control water flood test. Moreover, the nanoparticles mobilized residual oil and incremented oil recovery up to 9.2% of the OOIP. Displacement studies show that no single mechanism could account for the EOR effect with the application of nanoparticles. Instead, the mobilization of oil seemed to occur through a combination of reduced oil/water IFT, change in the rock surface roughness and wettability to more water-wet, and microscopic flow diversion due to clogging of the pores.

The formation of sinkholes in Winkler County, Texas is concerning due to the amount of oil and gas infrastructure and the potential for catastrophic losses. Evidences of new and potential sinkholes have been documented, and determining the cause of these sinkholes is paramount to mitigate the devastating consequences thereof. Studies shown that the Wink sinkholes result from both natural and anthropogenic influences. Data depicting land-cover changes, alterations in the hydrologic systems, climate changes, and oil and gas activity were analyzed in an effort to better understand the link between these processes and sinkhole formation. Results indicate that the combination of these processes lead to the current state; Land cover changes were highest in shrub versus grasses, undeveloped to developed and croplands. Rises in temperature and a decrease in precipitation indicate a shift towards a more arid climate. Changes to the hydraulic system are a direct result of these land cover changes while the groundwater quality depict an environment prone to dissolution. Historical oil and gas activities have created pathways of meteoric water infiltration to the underlying limestone and evaporite formation. The combination of these processes create an environment that accelerates sinkhole formations. Understanding these processes allows for the development and implementation of better land practices, better groundwater protections, and the need for monitoring and maintaining aging oil and gas infrastructure.

Extra virgin olive oil, water, and water/oil mixture (W/O) were used to fry, boil and sautée Mediterranean vegetables. We determined the variations between unused and used water and oil for the contents of total (TPC) and individual phenolic compounds measured by HPLC, and the antioxidant capacity (AC) by DPPH, FRAP and ABTS methods. The highest TPC value was found in water used to boil tomato, whereas the lowest in the EVOO from the W/O used for boiling potatoes. The TPC decreased in the processed EVOO, whereas the water was enriched after boiling. After processing, the concentrations of phenols exclusive to EVOO diminished with differentiated behavior, from complete elimination of hydroxytyrosol and tyrosol after sautéeing and W/O boiling, to conservation of pinoresinol. The transfer of phenols such as chlorogenic, gallic, dihydroxybenzoic, hydroxybenzoic and hydroxyphenylacetic acids, as well as luteolin, apigenin and vanillic acid from the vegetable to the oil was frequent when eggplant, tomato and pumpkin were cooked. The cooking water was enriched in most of the phenols analysed, as the case of chlorogenic acid and phenols exclusive to EVOO after W/O boiling. The values of AC in the fresh oil decreased or were maintained after being used to cook the vegetables. With some exceptional increases in the oil used for frying (p<0.05). The cooking techniques were classified in decreasing order according to the AC as follows: raw>deep frying>sautéing>boiling. This pattern was more consistent with DPPH results (from potato, eggplant and pumpkin) than in those of ABTS (pumpkin) and FRAP (eggplant). The water fraction recovered from boiling was enriched in Trolox equivalents being higher when EVOO was added. Phenolic content and AC in the EVOO decreased after cooking Mediterranean Diet vegetables, whereas the water was enriched after the boiling processes, particularly when oil was included.

Filament wound composite pipes are frequently used in the field were transmission of high pressured chemical fluids, disposal of industrial wastes, oil and natural gas transmission takes place. In oil and gas industry, the pipelines transporting heavy crude oil are subjected to variable pressure waves causing fluctuating stress levels in the pipes. Computational Fluid Dynamics Analysis was performed using Ansys 15.0 Fluent software to study the effects of these pressure waves on some specified joints in the pipes. Depending on the type of heavy crude oil being used, the flow behavior indicated a considerable degree of stress levels in certain connecting joints, causing the joints to become weak over a prolonged period of use. In this research comparison of various pipe joints was done by using different material and the output result of the stress levels of the pipe joints were checked so that the life of the pipe joints can be optimized by the change of material.

A possible way to valorize citrus peels, which are byproducts of the juice extraction industry, is to use them as natural biopreservatives. In this paper we present early results from a compared Solvent Free Microwave Extraction (SFME) with Hydro-Distillation (HD) and Cold Pressing (CP) of essential oils (EOs) using fresh orange peel (Citrus sinensis L. var. Valencia late), a by-product in the production of orange juice in Algeria. The EOs were analyzed by gas chromatography coupled to mass spectrometry (GC-MS). All extracted C. sinensis EOs were chemotype limonene (94.64 to 95.48%). SFME is performed without added any solvent or water. SFME increases EO yield and eliminate wastewater treatment, resulting in a great progress in terms of time and cost efficiency. In its second part, the present study was conducted to evaluate “in vitro”, the antioxidant activities of Solvent Free Microwave (SFM) extracted orange EO by using the DPPH• (2,2-di-phenyl-1-picrilhydrazyl) free radical scavenging assay. The ability of orange EO to scavenge the free radical DPPH• was high, exceeding 80%. The result of the DPPH assay gives an IC₅₀ range value of 89.25 μg/mL (0.09 mg/mL) for the studied sample. Accordingly to the scientific literature, C. sinensis EO tested in the present study presented strong antioxidant activity, when looking to its values of AAI = 1.12 μg/mL. The feasibility of biopreservation used EOs as an alternative to synthetic techniques for liquid whole egg (LWE) stored under commercial retail conditions was investigated. The orange EO extracted by SFM was screened for its antibacterial and antioxidant activities in LWE at concentrations of 0.1, 0.3 and 0.5%. The TBA-RS results showed that the EO treatments significantly (p < 0.05) reduced the lipid oxidation in LWE. The long term oxidative, microbial and organoleptical stability of the LWE during display was positively influenced by orange EO treatments. Therefore, the results obtained here confirm that EO treatment as a promising technology to extend the commercial shelf-life of liquid egg products during retail/display.

Plants of the genus Zingiber (Family Zingiberaceae) are widely used throughout the world as food and medicinal plants. They represent very popular herbal remedies in various traditional healing systems; in particular, rhizome of Zingiber spp. plants has a long history of ethnobotanical uses because of a plethora of curative properties. Antimicrobial activity of rhizome essential oil has been extensively confirmed in vitro and attributed to its chemical components, mainly consisting in monoterpene and sesquiterpene hydrocarbons such as α-zingiberene, ar-curcumene, β-bisabolene and β-sesquiphellandrene. In addition, gingerols have been identified as the major active components in the fresh rhizome, whereas shogaols, dehydrated gingerol derivatives, are the predominant pungent constituents in dried rhizome. Zingiber spp. may thus represent a promising and innovative source of natural alternatives to chemical food preservatives. This approach would meet the increasing concern of consumers aware of the potential health risks associated with the conventional antimicrobial agents in food. This narrative review aims providing a literature overview on Zingiber spp. plants, their cultivation, traditional uses, phytochemical constituents and biological activities.

Sri Lanka's vulnerability to climate change-induced natural disasters, particularly floods, under-scores the urgent need for an integrated approach to disaster risk management (DRM) that ad-dresses the interconnected challenges within the water-food-land-energy nexus. The Deduru Oya basin, located in the north-western region, exemplifies this vulnerability, with its predominantly intermediate climatic zone susceptible to flooding. While the focus has traditionally been on flood risk reduction, it is imperative to recognize the broader implications of floods on water, food, land, and energy systems. This study aims to strengthen data acquisition and management efforts to better understand rainfall trends and their impact on the water-food-land-energy nexus in the Deduru Oya basin. By compiling 60 years of rainfall data and conducting time series analysis, we observed a decreasing trend in monthly rainfall, particularly during the South-West Monsoon, Second Inter Monsoon, and North-East Monsoon seasons. These findings have significant implica-tions for water availability, agricultural productivity, land use patterns, and energy generation in the basin. Moreover, the malfunction of stakeholders' responsibilities for local-level flood risk management exacerbates the challenges faced by communities living in flood-prone areas. By in-tegrating insights from this study into flood risk management strategies, stakeholders can develop holistic approaches that not only mitigate flood risk but also enhance resilience across the water-food-land-energy nexus. This interdisciplinary approach will inform policymakers, flood manag-ers, practitioners, and the community in formulating effective strategies to address the multifacet-ed challenges posed by floods in the Deduru Oya basin and beyond.

In the era of mounting water scarcity, particularly in arid regions, the agricultural sector is striving to optimize the water resource management practices. Treated wastewater (TWW) has emerged as a viable alternative to freshwater for irrigation, offering a sustainable solution to water conservation. However, ensuring the safety and quality of TWW is paramount to safeguard for both crop health and environmental integrity. Electrical conductivity (EC), a critical factor in assessing TWW suitability for irrigation, can significantly impact crop yields and soil health since it is directly linked to the concentration of dissolved salts and ions. Therefore, this study delves into the development of advanced predictive models for EC assessment by employing supervised machine learning (ML) techniques like the Support Vector Regression (SVR), Adaptive Network-based Fuzzy Inference System (ANFIS), and Multiple Linear Regression (MLR). The TWW samples collected from Al-Qatif area, Saudi Arabia were assessed in the lab through a sensor-based real-time monitoring system integrated with Internet of Things (IoT) network and a multiprobe device. The key water quality parameters assessed involved, temperature (T), pH, Oxidation Reduction Potential (ORP), Resistivity (RES), Total Dissolved Solids (TDS), Salinity and Turbidity which served as the foundation for these models, given their profound influence on and their anticipated impact on EC levels. Following feature selection, two distinct model combinations were identified for the SVR, ANFIS and MLR models. Furthermore, to evaluate prediction performance, four statistical criteria, including coefficient of determination (R²), correlation coefficient (R), mean square error (MSE), and root mean square error (RMSE), were employed. Overall, the comparative performance results proved that ANFIS-M2 indicated the strongest predictive capability with the R² value of 0.99572 and 0.75145 and the RMSE values of 0.00965 and 0.01134, respectively in both calibration and verification stages.

Key elements of Blue-Green Infrastructure are vegetation and stormwater storage. A combination of a bioretention cell with an underlying trench (BC-T) serving as a tree pit is often used in dense urban environments. An adequate ratio of drained area to bioretention cell area is a crucial design parameter. The ratio is derived from the hydrological balance; however, input data are often difficult to obtain or uncertain. The goal is to study the sensitivity of such data (tree water uptake and water holding capacities of soil filter and trench substrate) in the BC-T design. Sensitivity analysis is performed for the setup of a BC-T used in Prague, Czech Republic. A 10-year rainfall series (1 hour resolution) is used as an input. Data that are subject to the sensitivity analysis are changed for different trench exfiltration rates, and the effect on the size of the drained area is studied. At low trench exfiltration rates (1.8 mm.h-1), both the water holding capacity of the trench substrate and potential tree water uptake have a significant influence (more than a 20% change in the size of the drained area) and cannot be neglected. At good exfiltration rates (more than 18 mm.h-1) or when the trench is equipped with an underdrain, all studied parameters can be neglected. However, it is recommended to reduce the size of the drained area by 10-20%.

Numerous reservoirs that play a significant role in worldwide petroleum production and reserves contain fractures. Typically, the fractures must form a connected network for a reservoir to be classified as naturally fractured. Characterizing the reservoir with a focus on its fracture network is crucial for modeling and predicting production performance. To simplify the solution, dual continuum modeling techniques are commonly employed. However, to use continuum-scale approaches, properties such as average aperture, permeability, and matrix fracture interaction parameters must be assigned, making it necessary to improve fracture depiction and modeling methods. This study investigates a fractured reservoir with a low matrix permeability and a well-connected fracture network. The focus is on the impact of the hyrachical fracture network on the production performance of gas-based enhanced oil recovery methods. The Discrete Fracture Model (DFN) was utilized to create comprehensive two-dimensional models for three processes: Gas Injection (GI), Water Alternating Gas (WAG), and Foam Assisted Water Alternating Gas (FAWAG). Moreover, dimensionless numbers were employed to establish connections between properties across the entire fracture hierarchy, spanning from minor to major fractures and encompassing the fracture intensity. The results indicate that the FAWAG is more sensitive to fracture types and networks than the WAG and GI processes. Hence, the sensitivity of the individual EOR method to the fracture network requires a respective depth of description of the fracture network. However, other factors, such as reservoir fluids properties and fracture properties, might influence the recovery when the minor fracture networks are excluded. This study has determined that, among the enhanced oil recovery (EOR) techniques examined, the significance of the hyrachical depth of fracture networks diminishes as the ratio of major (primary fracture) aperture to the aperture of medium and minor fractures increases. Additionally, the impact of the assisted-gravity drainage method was greater with increased reservoir height; however, as the intensity ratio increased, the relative importance of medium and minor fracture networks decreased.

Hepatocellular carcinoma (HCC) is the most common form of liver cancer worldwide. Accumulating clinical and experimental evidence suggests the role of cyclo-oxygenase (COX) enzymes in the pathogenesis of cancers including HCC. Deuterium-enriched water (DEW) and deuterium-depleted water (DDW) play a role both in the treatment and prevention of cancers. Combination therapy using COX-inhibitors and DDW/DEW could be a rational strategy to enhance the cytotoxicity of either agent in HCC. The cytotoxicity of celecoxib or indomethacin, alone and in combination with DDW or DEW was determined in the Hep-G2 HCC cell line by MTT assay. The COX-2, MAPK pathway proteins, the anti-apoptotic Bcl2 and pro-apoptotic Bax proteins, and caspase-3 activity were determined by SDS-PAGE and western blot. Co-treatment of selective and non-selective COX-2 inhibitors with DEW led to a remarkable increase in cytotoxicity and apoptosis of Hep-G2 cells. These events were associated with the activation of p38 and JNK MAPKs and a decrease in pro-survival proteins Bcl-2, COX-2, and ERK1/2. Furthermore, the combination therapy activated caspase-3, and the apoptosis mediator, and disabled poly ADP-ribose polymerase (PARP), the key DNA repair enzyme, by cleaving it. The combination of DEW with NSAIDs might be effective against HCC cells by influencing principal cell signaling pathways, and this has a potential to become a candidate for chemotherapy.

Water hyacinth (Eichhornia crassipes) is a potential accumulator of water pollutants in aquatic ecosystems, and its presence in water systems can affect water quality. This study used different field measurements and laboratory tests of Lake Water to determine the impact of water hyacinth phytoremediation capacity. A total of eight sampling stations used for the two lakes; Lake Koka and Lake Ziway. Sampling stations were selected from sites infested with water hyacinth (low, medium and high) and non-water hyacinth aquatic plants during wet and dry seasons to compare the effects of plants on water quality in the two lakes. All the sampled stations had various human interventions. The water samples were tested for the selected physico-chemical properties namely phosphate, nitrate, pH, electrical conductivity (EC), Biological oxygen demand (BOD5), temperature, and heavy metals (Chromium (Cr), Lead (Pb), Cadmium (Cd), Zinc (Zn), and Copper (Cu). These water quality variables were compared by means of ANOVA. Despite the COD of Lake Ziway, this study found no significant (p &gt; 0.05) variation in the concentrations of Cu, EC, pH and temperature between wet and dry seasons in either lake. Variations in Zn concentration and other physico-chemical parameters (EC, BOD, COD, nitrate, phosphate) between low, medium and high levels of water hyacinth were significant in both lakes (p&lt;0.05). Water hyacinth has shown significant phytoremediation nature during wet and dry seasons. The lowest average heavy metal, phosphate, and nitrate concentrations; and significant pH and temperature variations were observed in Lakes Koka and Lake Ziway, among water hyacinth and other grass-infested sites.

Saltwater intrusion in the rapidly developing city of Da Nang in central Vietnam is currently causing various water-related challenges, including inadequate water supply and water pollution. An integrated SWAT-MODFLOW numerical model was used to investigate the origin and mechanism of saltwater in Holocene and Pleistocene aquifers. Geophysical and isotopic approaches were used to validate the SEAWAT model applied for simulating saltwater intrusion. The results suggest that the ebb and flow of tides, as well as water levels in rivers primarily impact coastal aquifers. However, effective water resource planning and management, along with maintaining the natural recharge of fresh water from local rain during the rainy season, could enable the rational and efficient utilization of groundwater, reducing saltwater intrusion in many areas. During the dry season, groundwater is recharged from higher altitude areas. The current saltwater intrusion mainly occurs along the rivers up to the hydraulic dam. Simulated models, using scenarios of stop abstracting groundwater, but changing to the use of surface water for drinking water, show that the area of saline water shrinks quickly after 30 years, reducing from 59.6 km2 to 39.5 km2 and from 40.2 km2 to 28.6 km2 in Holocene and Pleistocene, respectively.

In this article, we present the use of the coupled land surface model and groundwater flow model SWAT-MODFLOW with the decision support tool WEAP (Water Evaluation and Planning software) to predict future surface water abstraction scenarios in a complex river basin, under conditions of climate change. The modeling framework is applied to the Dee River catchment in Wales, United Kingdom. Regarding hydrology, the coupled model improves overall water balance and low streamflow conditions, compared to a stand-alone SWAT model. The calibrated SWAT-MODFLOW is employed with high resolution climate model data from the UKCP18 project with future scenario of RCP85 from 2020 to 2040. Then, water supply results from SWAT-MODFLOW are fed into WEAP as input for the river reach in the downstream region of the river basin. This system is utilized to create various future scenarios of surface water abstraction of public water supply in the downstream region: maximum licensed withdraw, 50 % authorized abstractions, monthly time series with 1% increase of water use, and maximum water withdraw year based on historical records repeated every year with 1% increase of water use, to estimate the unmet demands and streamflow requirement. This modeling approach can be used in other river basins to manage scenarios of supply and demand.

Seyfe Lake is an important part of the natural ecosystem of Central Anatolia and lies within a 1487 km² closed basin. Groundwater withdrawal for irrigation and recent climatic change have caused lake area to decrease for decades and to completely disappear briefly in August 2008. Groundwater quality is crucial for sustainable irrigation in the Seyfe Basin. A key finding of this study is the difference in the Hardie-Eugster alkalinity-to-calcium ratio of the lake water and that of most groundwater wells in the basin. This difference in the chemical signature of Seyfe Lake and basin groundwater means the evaporative salinization pathway of most groundwater discharged into the lake cannot account for the composition of Seyfe Lake. The ratio of actual evapotranspiration to precipitation will increase under current climate change projections. A second finding, with implications for soil salinization, is that most groundwater in Seyfe Basin has a Hardie-Eugster alkalinity-tocalcium ratio greater than unity, meaning soil alkalization will accompany soil salinization.

Aero submarines (aerosubs) are vehicles that can both fly both in air and travel under water. The concept of dual aerial and aquatic vehicles emerged in 1939 when Russian engineer Boris Ushakov proposed the “flying submarine”[1], and this was followed by further developments including RFS1 [2], convair project in 1964[3] , etc. however, to date, limited attempt has been diverted towards the advanced development of such aircraft. This is heavily influenced by challenges associated with the design and operation of the same. Based on the review of literature the authors aim to introduce a theoretical design for an aerosub (QFS-20) with a view to address the design and operation issues including power, entry to and exit from water.

In the case of vascular plants the process of water loss by leafs and water absorption by the root is well known. There is agreement on the passive nature of long-distance moisture movement in the dead cells of the xylem; however, controversy exists focusing on the long-distance water transport principle. Hales (1726) founded a view of bulk flow based on water suction after experiments with cut twigs. The previous doctrine of long-distance water transport within vessel elements and tracheid of the xylem of intact plants – the relevant cohesion theory in text books – was developed mainly by Boehm (1893), Renner (1911) and Dixon (1914) with plant artefacts. Water movement according to this theory is based on an assumed hydrodynamic bulk fluid flow in xylem in continuous water columns (free of water vapour space), under tension, according to the law of Poiseuille (see e.g. Dixon 1914). Physically hydrodynamics is part of fluid mechanics, as a result Poiseuille’s law is usually valid only for hydrodynamic bulk flow in ideal capillaries (Sutera & Skalak, 1993). Besides the basic requirement for transport, according to cohesion theory, the existence of ideal capillaries is not compatible with either: “Because vessel elements and tracheid do not stand as ideal capillaries. …” (Bresinsky et al. 2008, translated from German). Unlike ideal capillaries, the walls of vessel elements and tracheid interact with the transported water. These walls are able to function as a source or as a sink for the transported water because of interaction with the cell walls. With the interaction, vessel elements and tracheid, part of the xylem, can shrink and swell, unlike ideal capillaries. Because the xylem (in woody plants part of the wood) is inconsistent with the basic law of fluid flow, the equation of mass balance (Zimmermann et al. 2004) and cohesion theory are not strictly followed.Many plant physiologists view the cohesion theory as appropriate, however, this theory remains controver­sial, i.e. by Eisenhut (1988), Laschimke (1990) and Hahn (1993). Nultsch (1996) gives doubts referring to the present doctrine of plant water transport. Zimmermann et al. (2004) reject the cohesion theory and conclude: “... that the arguments of the proponents of the Cohesion Theory are completely misleading” (Zimmermann et al. 2004). Hence cohesion theory can be treated as inapplicable and the question arises: how does water transport in fact function? In the following, it is gone into in more detail. A sorption hypothesis of actual water transport, based on empirical fact, shall be addressed in this paper.

Water management can improve the quality of valuable ecosystem services but can be costly to implement and the management costs are covered by national taxes collected by water users. Based on 30 valuation studies of water quality improvement from the Environmental Valuation Information System (EVIS) database provided by Korea Environment Institute (KEI), a meta-regression analysis was employed to measure the benefits that major river basins provided to the society. We compare these benefits to the costs, namely River Management Funds (RMFs) which are financial resources to support a variety of projects for managing and improving upstream water quality. Based on benefit-cost comparison, this study evaluates the efficiency of water resource management in South Korea. This study also provides policy options that are helpful to maintain the sustainability of water resource by improving the planning and performance of water management in the long run.

Satellite derived bathymetry methods over coastal areas were born to deliver basic and useful information like bathymetry. However, the process is not straightforward, the main limitation being the need of field data. The Self-calibrated Spectral Supervised Shallow-water Modeler (4SM) method was tested to obtain coastal bathymetry without the use of any field data. Using LANDSAT-8 multispectral images from 2013 to 2016, a bathymetric time series was produced. Groundtruthed depths and an alternative method, Stumpf’s Band Ratio Algorithm, were used to verify the results. Retrieved (4SM) vs groundtruthed depths scored an average r2 (0.90), and a low error (RMSE = 1.47 m). Also 4SM showed, over the whole time series, the same average accuracy of the control method (40%). Advantages, limitations and operability under complex atmosphere and water column conditions, and high and low-albedo bottom processing capabilities of 4SM are discussed. In conclusion, the findings suggest that 4SM is equally accurate as the commonly used Stumpf’s method, the only difference being the independence of 4SM to previous field data, and the potential to deliver bottom spectral characteristics for further modelling. 4SM represents a significative advance in coastal remote sensing potential to obtain bathymetry and optical properties of the marine bottom.

Water quality assessment in pastoral of Tibetan Plateau, which is water sources for about 40% of world's population and the runoff-yield area of Yellow rivers, is very important. In this paper, Xiahe county which belongs to Tibetan Plateau pastoral was investigated. Six parameters(via, chloride, COD, ammonia nitrogen, nitrate, fluoride, sulfate) were selected to assess the water quality and health degree by using fuzzy comprehensive evaluation methods. The hydrochemical type in surface water was of HCO3--Mg2+-Ca2+ type. The cations and anions in surface water were mainly from weathering and dissolution of carbonate rock. Results showed that the water quality in all 69 sampling sites was all of class Ⅰ. The integrated health degree reached more than 0.85 and the health rate were 100%. Although ammonia nitrogen was regarded as the main contamination factor, but it had a little effect on the entire body of water. Overall, the surface water qualities of most samples in Xiahe County was good condition.

There is a growing need to implement modern technologies, such as digital twinning, to improve the efficiency of transport fleet maintenance processes and maintain the company's operational capacity at the required level. Therefore, the paper reviews the existing literature to present an up-to-date and content-relevant analysis in this field. The proposed methodology is a systematic literature review using the Primo multi-search tool following Preferred Reporting Items for Systematic Reviews and Meta-Analyzes (PRISMA) guidelines. The main inclusion criteria included the publication dates (studies published from 2012–2024) and studies published in English. This resulted in the selection of 201 of the most relevant papers in the area of investigation. Finally, selected articles in this review were categorized into seven groups: a) air transportation, b) railway transportation, c) land transportation (road), d) in-house logistics, e) water and intermodal transportation, f) supply chain operation, and g) other applications. One of the main advantages of the study is that the results are obtained from different scientific sources/databases thanks to using the multi-search tool. Moreover, a bibliometric analysis of the selected papers was performed. The results have led the authors to specify the main research problems and trends related to the analyzed area and to identify the main research gaps for future investigation from academic and engineering perspectives. In addition, based on the review results, a framework for DT in transportation system maintenance was developed. The study ends with conclusions and future research directions.

Paving blocks are concrete pieces placed in exposed places to the weather, which are sub-jected to loads and wear. Hence, quality control in the manufacture of paving blocks is es-sential to guarantee the properties and durability of the product in construction projects. In Ecuador, the requirements are described in the Ecuadorian technical standard "NTE INEN 3040", and tensile splitting strength is a fundamental requirement to guarantee product quality. It is analyzed using quality control measurements such as dimensions, the weight of the fresh paving block in the vibro-compacted process, and the percentage of water absorption in order to know how the variables influence and manage to predict the tensile splitting strength to avoid product non-conformity in advance, having a timely and better control of the manufacturing process. The data was obtained from a company that can produce 30 000 units per day of rectangular paving blocks with 6 cm thickness. Mul-tivariate models such as multiple linear regression, regression trees, random forests and neural networks are performed to predict the tensile splitting strength variable through two groups of predictors; the first group is the thickness mm, width mm, length mm, mass of fresh paving block g and percentage of water absorption %. The second group of pre-dictor variables is the density of the fresh paving block kg/m3 and the percentage of water absorption %. It is concluded that the multiple linear regression method performs better in predicting the first group of predictor variables with a mean square error (MSE) of 0.110086, followed by the neural network without hidden layers resulting in an MSE of 0.112198. The best method for the second set of predictors was the neural network with-out hidden layers with a mean square error ( MSE ) of 0.112402, closely followed by the multiple linear regression model with an MSE of 0.115044.

In a Water-Cooled Lithium-Lead (WCLL) Breeding Blanket (BB), the heat generated by the plasma thermal radiation and nuclear reactions is removed mainly by two components; namely, the First Wall (FW) and the Breeding Zone (BZ). The FW faces the neutrons and charged particles fluxes generated by the fusion reactions and the thermal radiation coming from the plasma. The present work takes into account the FW cooling system inspired by the WCLL BB 2018 design of DEMO 2017 baseline. Unlike the baseline where a Pressurized-Water Reactor (PWR) setup is used for the coolant, various setup between the Boiling Water Reactor (BWR) and the High-Pressure (HP) BWR are studied in the present work operating in the Two-Phase Flow (TPF) regime. The 3D model of the FW in the WCLL BB 2018 design is simplified into a 1D model and a steady state analysis is carried out to optimize the mass flow rate of the water and the number of parallel channels at the BB cells at different poloidal locations of the reactor, which helps not only in reducing the used coolant but also in improving the Tritium Breeding Ratio (TBR). The present work takes into account forced convection in the liquid only region, the subcooled boiling region, and the saturated boiling region using suitable empirical or semi-empirical models from the literature. The results are validated against the existing results in the literature. In the end, related conclusions are made regarding the pros and cons of the studied operating conditions.

Infections due to Candida spp., they are a threat to global health, with high rates of morbidity and mortality due to their drug resistance, especially in immunocompromised people. Thus, the search for new alternatives is urgent today. In recent years, combined therapy with compounds of natural origin has been proposed as an alternative. Considering the biological potential of isoespintanol (ISO) and continuing with its study, the objective of this research was to assess the effect of ISO in combination with the antifungals, fluconazole (FLZ), amphotericin B (AFB) and caspofungin (CASP), against clinical isolates of C. tropicalis and evaluate the cytotoxic effect of this compound in the acute phase (days 0 and 14) and chronic phase (days 0, 14, 28, 42, 56, 70 and 84), in female mice (Mus musculus) of the Balb/c lineage. The results show that ISO can potentiate the effect of FLZ, AFB and CASP, showing synergism with these antifungals. Evaluation of the mice by direct vision showed no behavioral changes or variation in weight during treatment; furthermore, the analysis of the cytokines IFN-γ and TNF in plasma, peritoneal cavity lavage (PCL) and bronchoalveolar lavage (BAL) indicated that there was no inflammation process and histopathological studies of lung, liver and kidney showed no signs of toxicity caused by ISO; this was consistent with the analysis of oxaloacetic transaminases (GOT) and pyruvic transaminases (GPT), which remained in the standard range. These findings indicate that ISO does not have a cytotoxic effect at the doses evaluated. Our results place ISO as a monoterpene of interest in the search for compounds with pharmacological potential.

This survey provides a comprehensive overview of in-context learning (ICL) in large language models (LLMs), a phenomenon where models can adapt to new tasks without parameter updates by leveraging task-relevant information within the input context. We explore the definition and mechanisms of ICL, investigate the factors contributing to its emergence, and discuss strategies for optimizing and effectively utilizing ICL in various applications. Through a systematic review of recent literature, we first clarify what ICL is, distinguishing it from traditional fine-tuning approaches and highlighting its unique characteristics. We then delve into the underlying causes of ICL, examining theories ranging from implicit meta-learning during pre-training to the emergence of task vectors in LLMs. The survey also covers various approaches to enhance ICL performance, including prompt engineering techniques, demonstration selection strategies, and methods for improving generalization across diverse tasks. Additionally, we discuss the limitations and challenges of ICL, such as its sensitivity to demonstration ordering and potential biases. By synthesizing findings from numerous studies, we aim to provide researchers and practitioners with a clear understanding of the current state of ICL research, its practical implications, and promising directions for future investigation. This survey serves as a valuable resource for those seeking to leverage ICL capabilities in LLMs and contributes to the ongoing discourse on the remarkable adaptability of these models.

The domain of Information and Communication Technology (ICT) education has garnered significant consideration in recent times. However, several challenges are inherent to this area of study, including monetary expense, temporal factors, pedagogical environment, teacher training programs, incentive, syllabus design, and health-related concerns. This paper presents an analysis of the difficulties encountered in the realm of ICT education in Japan, taking into account ten different perspectives.

The presence of various pesticides in natural streams and wastewater is a significant environmental issue due to their high toxicity, which causes harmful consequences even at low quantities. One cost-effective method to remove these pollutants from water could be through adsorption using inexpensive, easily obtained adsorbent - biochar. This study demonstrates the effectiveness of using biochar produced from wheat grains to eliminate alachlor from water. The sorption properties of the biochar and the likely removal mechanisms have been defined. The study found that the biochar removed 76-94% of alachlor, depending on the initial concentration of the pesticide in water. The pseudo-second-order kinetic model (R² = 0.999) and the Langmuir isotherm model (R² = 0.996) effectively characterized the elimination of alachlor by wheat grains biochar. The analyzed biochar, with its micropores and various surface functional groups, can effectively adsorb alachlor and trap it within its structure.

No one can dismiss the fundamental role played by water in several important biochemical processes, including the folding of globular proteins. The so-called hydrophobic effect is the theoretical construction to rationalize how water molecules stabilize the folded state. However, over the years, analyses have been published that lead to the conclusion that water destabilizes the folded state. The aim of the present work is to state that the gain in translational entropy of water molecules (due to the decrease in water accessible surface area associated with folding) is the driving force of protein folding.

Umbria is an Italian region with a highly fragmented water supply, with many small water distribution systems fed by local sources. The chlorination in these small water systems faces many difficulties related to the high demand variation, low economic relevance, and access to infrastructures. As a result, there are many noncompliances with the quality of the supplied water, which causes a decrease in the performance indicators and tariff. This research investigates the possibility of using a low-cost chlorination system to consider different environmental conditions (e.g., temperature variations of water and environment, pH, ...) and discontinuous consumption. A device for this specific use is developed and tested by laboratory tests and is ready for use in the field.

The Normalized Differential Spectral Attenuation (NDSA) technique was proposed years ago as an active method for measuring Integrated Water Vapor (IWV) along a Ku/K-band radio link immersed (totally or partially) in the troposphere. The approach is of the active kind, as it relies on the transmission of a couple of sinusoidal signals, whose power is measured at the receiver, thus providing the differential attenuation measurements from which IWV estimates can be in turn derived. In 2018, a prototype instrument providing such differential attenuation measurements was completed and set up for a first measurement campaign aimed at demonstrating the NDSA method. By the end of June 2022, the instrument was profoundly modified and upgraded so that a second measurement campaign could be carried out from August 1 to November 30, 2022. The transmitter was placed on the top of Monte Gomito (44.1277°lat, 10.6434°lon, 1892 m a.s.l.) and the receiver on the roof of the Department of Information Engineering of the University of Florence (43.7985°lat, 11.2528°lon, 50 m a.s.l.). The resulting radio link length was 61.15 km. Four ground weather stations of the regional weather service were selected among those available. In this paper, we describe the upgraded instrument and present the outcomes of the new measurement campaign, whose purpose was mainly to compare the IWV estimates provided by the instrument with the ground sensors measurements of air temperature, air humidity, barometric pressure, and rainfall.

The only solution to avoid pollution due to sewage is to treat the effluent and reuse water and sludge at the wastewater production site. This makes it necessary to install treatment plants distributed along the sewer system to prevent the movement of effluents with the consequent losses to the aquifer. This new management is called decentralized wastewater treatment. To make this change possible, it is necessary to develop treatment plants that do not represent a health hazard for citizens, eliminating the nuisance caused by traditional plants. These plants need to be robust, operate autonomously, have reduced maintenance and exhaustive control of each process, where each cubic meter of effluent is perfectly controlled, avoiding losses to the aquifer or discharges that may occur due to deficiencies in their purification capacity; constantly producing water and sludge, which are directly reusable with all the health and environmental guarantees regardless of variations in inlet effluent or environmental conditions. This article presents a paradigmatic case of a decentralized solution with conditions of maximum complexity that has been solved efficiently, saving around 98% of the initial investment, completely avoiding wastewater discharges into the environment and reusing 100% of the treated water, in 14 years of operation.

During the last decade, the demand for lithium has been growing exponentially with its widespread uses in manufacturing, especially with the worldwide deployment of electric vehicles. Thus, lithium is considered integral to the U.S. economy, technological advancement, and the pursuit of sustainable and clean energy solutions. The produced water is known to be rich in several minerals and valuable elements, such as potassium and magnesium, and a trace amount of precious elements including lithium. However, the existence of metals in the produced water is one of the challenges to extract lithium, especially magnesium which is located in diagonal positions within the periodic table that exhibit similarities. The produced water was first purified, resulting in the complete removal of magnesium, and then lithium was precipitated by phosphate. The effects of operating conditions on the Li₃PO₄ precipitation behaviors were evaluated. The effect of different precipitating reagents was evaluated on the percentage of lithium extracted, Na₃PO4 (TSP) was found to be a promising Li precipitating reagent. The highest percentage of lithium extracted was reached when the Li concentration of produced water was enriched and increased up to 350 mg/l, then Li removal was 53% at 7 grams of TSP and 200 rpm for 2 hours. The results indicated that temperature is a more important factor than stirring speed. The novelty of the current work is not only by the results obtained that may create additional financial benefits to oil-producing areas but on that the sustainable disposal of produced water may encourage the recycling and reuse practice, ultimately reducing the use of freshwater for hydraulic fracturing.

Scales are widely used in many agricultural applications, ranging from weighing crops at harvest to determine crop yields to regularly weighing animals to determine growth rate. In agricultural research applications, there is a long history of measuring crop water use (evapotranspiration) using a particular type of scale called weighing lysimeters. Typically, weighing lysimeters require very accurate data logging systems that tend to be expensive. Recent developments in open-source technologies, such as micro-controllers and Internet of Things (IoT) platforms, created opportunities for developing effective and affordable ways to monitor crop water use and transmit the data to the Internet in near real-time. Therefore, this study aimed to create an affordable Internet of Things (IoT) scale system to measure crop evapotranspiration. A scale system to monitor crop evapotranspiration was developed consisting of an Arduino-compatible microcontroller with cell phone communication, electronic load cells, an Inter-Integrated Circuit (I2C) multiplexer, and analog-to-digital converters (ADC). The system was powered by a LiPo battery, charged by a small (6 W) solar panel. The IoT scale system was programmed to collect data from the load cells at regular time intervals and send the data to the ThingSpeak.com IoT platform. The system performed successfully during indoor and outdoor experiments conducted in 2023 at the Clemson University Edisto Research and Education Center, Blackville, SC. The results from the experiments showed that the IoT scale system could accurately measure crop evapotranspiration using the weighing lysimeter technique.

Thin supported inorganic mesoporous membranes are used for removal of salts, small molecules (PFAS, dyes, polyanions) and particulate species (oil droplets) from aqueous sources with high flux and selectivity. Nano-filtration membranes can reject simple salts with 80-100% selectivity through a space charge mechanism. Rejection by size selectivity can be near 100% since the membranes can have a very narrow size distribution. Mesoporous membranes have received par-ticular interest due to their (potential) stability at operational conditions and defouling operations. More recently membranes with extreme stability became interesting with the advent of in-situ fouling mitigation by means of ultrasound, emitted from within the membrane structure. For this reason we explored the stability of available and new membranes with accelerated lifetime tests in aqueous solutions at various temperatures and pH values. Of the available ceria, titania, mag-netite membranes none were actually stable at all test conditions. In earlier work, it was already established that meso-porous alumina membranes have very poor stability. A new nano-filtration membrane was made of cubic zirconia membranes that exhibited a near perfect stability. A new ultra-filtration membrane was made of amorphous silica that was fully stable in ultrapure water at 80°C. This work provides details of membrane synthesis, stability characterization and actual sta-bility data.

Sustained water management requires quantitative information and the knowledge of spatiotemporal dynamics of hydrological system within the basin. This can be achieved through the research. Several studies have investigated both surface water and groundwater in Beterou catchment. However, there are few published papers on the application of the SWAT modeling in Beterou catchment. The objective of this study was to evaluate the performance of SWAT to simulate the water balance within the watershed. The inputs data consist of digital elevation model, land use maps, soil map, climatic data and discharge records. The model was calibrated and validated using the Sequential Uncertainty Fitting (SUFI2) approach. The calibrated started from 1989 to 2006 with four years warming up period (1985-1988); and validation was from 2007 to 2020. The goodness of the model was assessed using five indices, i.e., Nash–Sutcliffe efficiency (NSE), the ratio of the root means square error to the standard deviation of measured data (RSR), percent bias (PBIAS), the coefficient of determination (R²), and Kling Gupta efficiency (KGE). Results showed that SWAT model successfully simulated river flow in Beterou catchment with NSE = 0.79, R2 = 0.80 and KGE= 0.83 for the calibration process against validation process that provides NSE = 0.78, R2 = 0.78 and KGE= 0.85 using site-based streamflow data. The relative error (PBIAS) ranges from -12.2% to 3.1%. The parameters runoff curve number (CN2), Moist Bulk Density (SOL_BD), Base Flow Alpha Factor (ALPHA_BF), and the available water capacity of the soil layer (SOL_AWC) were the most sensitive parameter. The study provides further research with uncertainty analysis and recommendations for model improvement and provision of an efficient means to improve rainfall and discharges measurement data.

The population growth and its needs, has increasingly demanded water resources, requiring managers to adopt mechanisms to guarantee the availability and quality of water from springs. Among the instruments defined by law n. 9433/1997, water charges stand out. In this sense, the objective was to evaluate the evolution of charging for the use of water resources in Brazil, with emphasis on the channel of the Hydrographic Basin of the Paranaíba River. The methodology used was based on two phases, one of reviewing the articles available in Capes journals and the other, consulting the spreadsheets of the Araguari River Basin Agency with information on charges for the use of water within the competence of the Union in the Hydrographic Basin of the Paranaiba River. The results showed that charging for the use of water resources establish a relevant instrument for disciplining and raising financial resources that will enable improvements in the planning and management of water use. It should be noted that irrigation emerges as the main user of the flow captured from the Paranaíba River. However, the main source of funds for charging comes from the public supply. Among the Federation Units, the Federal District proved to be the largest source of contributions for charging the use of the Union's water resources in the Paranaíba River Basin.

In order to achieve the target, several activities are being undertaken, including the development of multipurpose reservoir planning for the water supply and sanitation infrastructure, irrigation, and hydropower development for the H project. To undertake this work, the main data given was rainfall data, flow data, catchment area, base population for water supply, and so on. This report presents a specifically preliminary study and design of water supply, irrigation, and hydropower development for the project, which is carried out in accordance with the scope of work given by our professor. The preliminary study and design are therefore to investigate scenarios and alternatives and prepare a document of water supply, irrigation, and hydropower infrastructures for the provision of the assignment. This report, as required in the assignment, contains project background, water sources assessment, selection of suitable hydropower potential, and irrigation sizing, design criteria, descriptions of the proposed scheme, preliminary design of water supply components. The objective of the project is to recommend and design a cost-effective water supply system, irrigation, and hydropower development to supply reliable, sufficient, and safe water from a defined water source to the H project. The specific objectives of the investigation works are: • To assess potential water source alternatives for water supply • Selecting appropriate size for the reservoir which could satisfy all water demand • Assess and select suitable irrigation development and hydropower potential. • Preliminary study and design of all components of the reservoir and appurtenant structures The scope of the project generally focuses on preliminary study and design of water supply, irrigation and hydropower development components from water sources potential and the water balance output.

In the last years, new numerical methods have been applied to weather data for water budget es-timation. Geostatistics is one of the most powerful approaches, when it comes to studying spatially relevant natural phenomena, as it takes into account the spatial correlation among measurements over a specific study area and increases the reliability of the estimation by providing the associate uncertainty. In this study, we tested the feasibility of using a geostatistical method called Ordinary Kriging to provide a reliable estimation of the water budget of the Foro river basin (Periadriatic area, Central Italy), by comparing the obtained results with a more traditional yet robust approach based on the Thiessen polygon spatialization method, considered here as a reference. The spatial estimation with the selected geostatistical and traditional approaches was performed on the av-erage monthly rainfall and temperatures derived from 33-year-long time series measured at the weather station of the regional monitoring network. To transform the spatial variables quantities of both rainfall and air temperature into actual runoff estimates that ideally represent the river dis-charge, we used both the Turc and Thornthwaite methods, considering variable Potential Infiltra-tion Coefficients according to the hydrogeological complexes’ distribution. For the geostatistical method, the same procedure was applied to the 95% confidence interval limits, to quantitatively assess the possible impact of the spatial uncertainty on the estimation of the river discharge. The results obtained by both methods, subsequently converted into monthly discharges, were com-pared to the average monthly discharges related to 33-year-long time series measured at different locations along the Foro river. The results obtained with the geostatistical approach proved to be in line with the ones from the traditional method. Additionally, using the rainfall and temperature values obtained with the Ordinary Kriging and the corresponding confidence interval limits, it was possible to quantify the uncertainty associated with the discharge values, making the estimates more reliable than the ones obtained with the traditional approach. However, the yearly distribu-tion of river discharge obtained by both the geostatistical and traditional methods appeared to be dissimilar to the measured ones. In such anthropized and groundwater-dependent river basins, the surface water use as well as the regulatory effect of the alluvial aquifer regime may affect the river discharge variability over the year and then can account for similar discrepancies between the in-flow and outflow water volumes.

Many of the current strategies for removing pollutants from water are based on nanomaterials and 18nanotechnology. Lower values of Biological Oxygen Demand (BOD5) and Chemical Oxygen De- 19 mand (COD) in water results in reduction in the amount of oxidizable pollutants. We present a study 20 on the reduction of COD and BOD5in water from Wadi El Bey River (Tunisia), using magnetite na- 21 noparticles (MNPs) and magnetic fields. The COD and BOD5 removal reached values higher than 22 50% after 60 min, with optimum efficiency at pH values of ≈8 and for MNPs concentrations of 1 g/L. 23 The use of a permanent magnetic field (0.33 T) showed an increase of COD and BOD5 removal from 2461% to 76% and from 63% to 78%, respectively. This enhancement is discussed in terms of the MNPs 25coagulation induced by the magnetic field and the adsorption of ionic species onto the MNPs sur- 26face due to Fe3O4 affinity.

As one of the important components of underwater propulsion systems, water lubricated bearings are often failure due to mechanical wearing and vibrating, especially under high loads and prolonged friction. In this paper, a dual-network co-crosslinking strategy based on HNBR is proposed, in which the epoxy network connects with the rubber network through Epoxidized Eommia ulmoides gum. The damping, tribological and mechanical properties of the prepared composite are systematically investigated. The results show that this material has excellent friction and vibration damping properties, with a water-lubricated coefficient of friction as low as 0.022 and a wear resistance as high as 3.87 × 10-6mm3/Nm. Preparing HNBR-based composite by dual network co-crosslinked is proved being a feasible solution to improve the reliability and service life of water-lubricated bearings.

Inspired by the process of bone formation in living organisms, many studies have been conducted to develop organic-inorganic composite materials by generating calcium phosphate crystals within solutions or dispersions of polymers with appropriate functional groups. Bones are composite materials consisting of organic polymers (mainly Type I collagen), carbonated apatite, and water, with volume fractions 35-45%, 35-45%, 15-25%, respectively. Carbonated apatite in bone contributes to rigidity, while organic polymers and water contribute to toughness. The inorganic crystal, carbonated apatite, is a plate-shaped crystal with dimensions of 50 nm × 25 nm × 1-4 nm, generating a significant organic-inorganic interface due to its nanoscale size. This interface is believed to absorb externally applied forces to dissipate mechanical energy to thermal energy. Creating such nanometer-scale structures using top-down approaches is challenging, making bottom-up methods like co-precipitation of polymer and inorganic crystals more suitable. In this account, efforts to develop eco-friendly mechanical materials using biomass such as cellulose and starch based on the bottom-up approach to bone-like composites are described.

In this research, a new conceptual framework introduced to analysis of water security. Using the exponential, logistic growth model, and employing the historical population of Tabriz city from 1956 to 2016, the future period (2022-2100) population predicted. Pearson Correlation, Spearman's Rho and Kendall's rank coefficients were used for analyzing correlation between population and water consumption. In addition, the amount of city water demand in the future period predicted using the ordinary least square model. Then, water stress and water scarcity indices calculated for Tabriz city in the future period. Results indicated that the mathematical population growth models are very suitable for prediction of city population. There was a significant positive correlation between the city population and water demand. In addition, the amount of water demand will proportionally increase with rising number of population. Finally, linear and quadratic equations presented for city water demand based on the city population number. It can be concluded that Tabriz city will be faced with severe water stress in the future period. The proposed new method in this study can be used for other different cities of the world. Also, Results will be helpful for decision makers in optimum management of urban water resources.

The astroclimatic conditions characterize the quality of astronomical site. The Terscol Observatory (coordinates 430 16 ‘29’’N, 420 30’ 03’’E) was founded over 42 years ago in 1980. The paper presents the results of analysis of long-term variations (1980-2022) of astroclimatic parameters as total cloud cover, precipitable water vapor, and wind speed at 200mbar level above the Terscol Observatory using ECMWF-ERA5 atmospheric reanalysis data. Long-term trends of the astroclimatic parameters are study statistical significantly trend analysis method using Mann–Kendall and Sen’s slope to estimate the magnitude of the changes. In result the site show not significant decreases of 200-hPa wind speed and increases of precipitable water vapor, but significant (99 per cent confidence level) long-term changes of total cover cloud above the Terscol Observatory.

Communities in semi-arid lands use sand dams to enhance access water during the dry seasons. However, there is limited information on the quality of water derived from these sand dams, especially in degraded lands where storm surface runoff poses contamination risk. Thus, this study aimed at assessing the spatial-temporal variations in water quality of sand dams in Chepareria, West Pokot County in Kenya. Water samples were collected from scooping holes across18 purposefully selected sand dams. Results obtained showed significant differences in water quality based on sand-dams age and location of scooping holes, but the magnitude of these differences differed with specific properties. For instance, in recently constructed sand dams (< 1 year), scooping holes near the sand dam wall had lower pH values (8.5) than holes scooped a distance from the sand dam wall (9.2). For total dissolved solutes and microbial properties, sand dam age had the greatest impact than the location of scooping holes. For example, water obtained from < 1 year old sand dams had significantly higher TDS with an average value of 100.3 mg L-1. The thermotolerant coliforms (TTC) exceeded the maximum allowable levels recommended by World Health Organization. Thus, water obtained from these sand dams should be treated before consumption. Finally, sand dams meant for domestic water harvesting should be protected. Shallow wells with appropriate aprons for effective protection against contamination should be installed to enhance abstraction of safe water from sand dams.

In the semi-arid region of Brazil, it is common to use saline or brackish water for crop production. However, this practice can negatively affect the soil, nutrient balance, and fruit quality and production. From this perspective, this study aimed to evaluate the effect of fertilization combinations with nitrogen (N), phosphorus (P), and potassium (K) on the production and quality of West Indian cherry grown under salt stress in the second year of production. The study was conducted in a protected environment following a randomized block design with treatments distributed in a 2 x 10 factorial arrangement referring to two levels of electrical conductivity of irrigation water (ECw) (0.6 and 4.0 dS m-1) and 10 NPK fertilization combinations (80-100-100; 100-100-100; 120-100-100; 140-100-100; 100-80-100; 100-120-100; 100-140-100; 100-100-80; 100-100-120 e 100-100-140% of the recommendation in the second year of production), with three replicates and one plant per lysimeter. The results indicate that irrigation of West Indian cherry crop irrigation at the water salinity of 4.0 dS m-1 negatively affected all fruit production variables. The interaction between the ECw of 0.6 dS m-1 and the 100-80-120 NPK fertilization combination increased the total number of fruits and the total fruit weight of West Indian cherry.

CMC/PVA composite nanofiber membrane was prepared by electrostatic spinning method, using carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) as raw materials and glutaraldehyde as cross-linking agent. The structure, morphology, thermal stability, and filtration performance of CMC/PVA nanofiber membranes were characterized by advanced instrumental analysis methods such as scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, ultraviolet analysis and energy spectrum analysis. The results show that the average fiber diameter decreases from 381 nm to 183 nm, when the spinning voltage is 23 KV and the jet speed is 2 µL/min. The obtained fiber has the smallest particle size and the most uniform distribution. Infrared spectroscopy analysis confirms that the adsorption behavior of nanofiber membranes on Cu2+ and Cr6+ is chemical adsorption. The retention rates of CMC/PVA nanofiber membranes for Cu2+ and Cr6+ reached 97% and 98%, respectively.

Disasters such as the 2015-2018 drought in South Africa usually negatively impact agricultural water, especially in smallholder farming systems. This study assessed the availability of irrigation water, performance of irrigation infrastructure, and water governance systems in Genadendal, Western Cape, with a focus on smallholder farmers. Data for streamflow, dam levels, and rainfall were acquired from water institutions and analysed using Microsoft Excel. The performance of the infrastructure and water governance were assessed based on the perceptions of smallholder farmers and key informants. A questionnaire was administered to eight smallholder farmers, followed by a focus group discussion with 15 smallholder farmers. Interviews were conducted with eight key informants who worked in water-related institutions. Qualitative data from the interviews were analysed using thematic content analysis. The study showed adequate agricultural water resources during the 2015-2018 drought period for the smallholder farmers who relied on water from dams. However, smallholder farmers who relied on the Riviersonderend River experienced severe water shortages during the same period. The findings also showed that there was poor performance of irrigation water infrastructure due to inadequate maintenance. Lack of coordination among institutions, insufficient funding, political interference, fragmentation of roles and responsibilities, lack of human resources, and farmers’ lack of participation and commitment in water resources management contributed to the dysfunctionality of irrigation water governance systems, leading to water insecurity. This study recommends adequate funding for the operation and maintenance of infrastructure. Furthermore, water institutions need to support smallholder farmers with training skills in agricultural water management and infrastructure maintenance. Further studies are recommended to quantify the water lost due to the poor performance of water infrastructure and to develop effective water governance in Genadendal.

Nanofibres have gained increasing attention due to their advantages of having a high porous structure, narrow pore size and distribution, and a high specific surface area. One of the most efficient techniques for producing nanofibres is via electrospinning. Nanofibres are currently being used in various fields, including water filtration. Although nanofibres possess the ability to filter various components, the fibres generally have a low mechanical strength that can mitigate the performance over time. Therefore, in overcoming this issue, several studies have focused on improving the strength of the nanofibre membranes for a water filtration application. This review discusses the advantages and challenges of nanofibres for water filtration membranes and summarises the methods to increase the strength of the membranes, including solvent vapour, thermal treatment, and chemical crosslinking.

(1) Background: Emergencies confront civilian and military healthcare providers with medical and hygienic challenges due to the lack of potable water. This pilot study aimed to describe the application of two different methods for microbiological monitoring of water in a harsh environment in terms of performance, ease of use, availability, and the possibility of using the results to evaluate water quality. (2) Methods: Samples from raw water, Potable water, and water for consumers were taken from two different camps with the same raw water source. The samples were analyzed by using IDEXX industry-standard methods (Colilert and Enterolert enzymatic test kits) and a combination of membrane filtration and 3M-Petrifilm. (3) Results: The IDEXX method used at the Norwegian Camp are easier to utilize and has a broader range of analyzing kits for drinking water analysis. In addition, IDEXX is better adapted to the requirements of the national legislation. However, the combination of membrane filtration followed by incubation on 3M-Petrifilm ™, as used at the Swedish camp, is a better field alternative compared to traditional bacteriology, as it eliminates the need to produce and store agar plates. (4) Conclusions: This pilot study highlights the need for adapted technical equipment and tools for internal microbiological control of water production in a harsh field environment and may facilitate the use of a relatively simple method for water control and ensure the safety of deployed staff in both civilian and military settings.

The unquenchable demand for rock materials has attracted many companies within the building and construction sector to invest in stone quarrying. However, this has brought about the environmental impacts with health threats to people. There is a paucity of information about the magnitude of pollution on air and water and how it varies with quarry sites. This study therefore investigated the physical impacts of quarrying on air and water and explored the in-situ mitigations to undesirable effects due to stone quarrying. Four active quarry sites were identified. Field measurements of dust (particulate matter) was conducted within the four quarry sites and in the nearby community. Water samples were collected from quarry pits and nearby shallow wells for laboratory analysis of water quality. Statistical Analysis of Variance (ANOVA) was used to test for differences in pollution across the four studied sites. Results revealed that, amidst use of wet crushing and water sprinkling on bare surfaces, dust emission was higher than the recommended permissible standards levels with a significant variation across the quarry sites with ANOVA (P-value=0.003) for PM2.5 and (P-value=0.04366) for PM10. Water pollution was mainly contributed by the non-permissive levels of nitrates, chromium, and pH. Polluted air and water are associated with sparking off health threats to the users in the community. In conclusion, quarry companies should strengthen the already existing mitigation of dust suppression. The study recommends additional measures such as treating quarry pit water before discharging to the open environment

Studies have shown the unconditional danger of biological attacks on underground hydroelectric pumped-storage power stations. A hypothetical list of biological damage to water conduits and dams is determined. Relevant predictions are given, as well as accident events of hydraulic structures are described. A universal scheme for the application of hazard protection measures, which can be comprehensive, has been developed. Praemonitus praemunitus – precautions should be taken.

Microplastics (MPs) are small pieces of plastics. They are ubiquitous in the environment and can enter the freshwater environment from surface run-off and wastewater effluent (treated and untreated), industrial effluent, degraded plastic waste, and atmospheric deposition. They are not usually destroyed but convert into one phase to another. They are a source of air pollution, occurring in dust and airborne fibrous particles. Mostly MPs are non-biodegradable while some MPs are biodegradable, which can be decomposed in the presence of ultraviolet (UV) light or by the action of microorganisms. Popular methods: chemical, spectroscopic, and thermo-analytical are available for the determination of the chemical composition and size of plastic particles. This chapter discusses the uses, health hazards, sources, and transport of MPs particles.

We revisit the notion of climate, along with its historical evolution, tracing the origin of the modern concerns about climate. The notion (and the scientific term) of climate has been established during the Greek antiquity in a geographical context and it acquired its statistical content (average weather) in modern times, after meteorological measurements had become common. Yet the modern definitions of climate are seriously affected by the wrong perception of the previous two centuries that climate should regularly be constant, unless an external agent acted. Therefore, we attempt to give a more rigorous definition of climate, consistent with the modern body of stochastics. We illustrate the definition by real-world data, which also exemplify the large climatic variability. Given this variability, the term “climate change” turns out to be scientifically unjustified. Specifically, it is a pleonasm as climate, like weather, has been ever changing. Indeed, a historical investigation reveals that the aim in using that term is not scientific but political. Within the political aims, water issues have been greatly promoted by projecting future catastrophes while reversing the true roles and causality directions. For this reason, we provide arguments that water is the main element that drives climate and not the opposite.

The motion of a circular elastic plate floating on the surface is investigated in the time–domain. The solution is found from the single frequency solutions and the method to solve for the circular plate is given using the eigenfunction matching method. Simple plane incident waves with a Gaussian profile in wavenumber space are considered and a more complex focused wave group is considered. Results are given for a range of plate and incident wave parameters are investigated. Code is provided to show how to simulate the complex motion.

To examine the hydrophobicity of torrefied wood fuel, the water resistances of torrefied pellets prepared by two different methods were evaluated using exposure tests under indoor and outdoor conditions. Torrefied pellets from the xylem of Japanese cedar (Sugi, Cryptomeria japonica) and oak (Konara, Quercus serrata) were prepared by two methods: the torrefaction of wood chips followed by pelletization and the pelletization of wood chips followed by torrefaction. It was found that the pellets prepared by pelletization followed by torrefaction had much lower moisture levels than those prepared by the other method and they showed almost no change in diameter after an outdoor weathering test. These characteristics are unique and indicate that the pellets can be applied not only for industrial use but also for residential and commercial purposes.

Rapeseed (Brassica napus) is one of the most important oil crops in the world; however, drought significantly curtails its growth and productivity. Identifying drought-tolerant germplasm is an efficient and low-cost strategy for addressing water shortages. Using water loss ratio (WLR) as an index of drought tolerance, we screened a panel of 265 B. napus lines. We identified eight low-WLR and six high-WLR accessions, which were regarded as drought-tolerant and drought-sensitive, respectively. Further validated these selected accessions at the seedling stage under drought-stress conditions. The drought-tolerant accessions had significantly greater fresh and dry weights under drought stress than the drought sensitive accessions. Using RT-qPCR, we showed that a set of previously reported drought-adaptive marker genes were expressed at higher levels in the drought-tolerant lines than in the drought-sensitive lines. These results indicated that the drought-tolerant genotypes could be identified from natural populations using WLR. Then, we performed a genome-wide association study to identify loci harboring single nucleotide polymorphisms (SNPs). A total of 139 SNPs were significantly associated with the WLR, of which chromosome A10 harbored the largest number. Furthermore, four putative candidate genes were selected by combining the SNP–WLR association results and transcriptional expression data with the changes in drought tolerance. Thus, we have identified two drought-tolerant B. napus cultivars and uncovered genome-wide variation differentiating B. napus lines related to WLR, in addition to providing insights for further research into WLR-related drought mechanisms.

This document makes a comprehensive analysis of the inequality of the water market in Chile, measured by the Gini coefficient method. The situation of water rights in Chile is of particular interest because it is a completely privatized system, where rights are traded in the market and therefore water is presented as a commodity. This privatization of water in Chile occurred as part of the process of neoliberalization since the 1981 Water Code. The results of this study indicate that both the concentration and the inequality in the distribution of water rights is very high. It proposes a profound revision of applying a mercantile logic to a scarce basic resource for life such as water and exploring the importance of its role as a national good for public use.

Mouthbrooding or oral incubation, the retention of early developmental stages inside of the mouth for an extended period of time, has evolved multiple times in bony fishes1,2. Though uncommon, this form of parental care has been documented and well-studied in several groups of freshwater fishes but is also known to occur in a small number of marine fishes, all inhabiting coastal waters1,2. A recent paper3, reported for the first time mouthbrooding in a deep-water fish species, the zeiform Parazen pacificus, which according to the authors “fills in a gap in the larval literature for this family of fishes and prompts further investigation into other novel reproductive modes of deep-sea fauna.”

The present study focuses on the synthesis, characterization, and investigation of a p-n heterojunction photocatalysis. Titanium dioxide (TiO2) can’t alone induce the photocatalytic water splitting due to its wide bandgap, which decreases its catalytic activity in the visible light. To make redshift of absorptivity for the TiO2, Nickel (Ni)-doped Graphene (rGO) supported TiO2 was synthesized. Several characterization techniques have been employed to validate the composition and the light absorption ability of the prepared photocatalysts including TEM, SEM, EDS, XRD, XPS, and UV-Vis spectroscopy. The characterization revealed successful doping of the Ni and TiO2 on the rGO nanosheet. Moreover, the UV-Vis spectroscopy indicated a significant shift of light absorption toward the visible spectrum. The photon-induced evolution of H2 was remarkably enhanced using the prepared Ni-rGO/TiO2 nanocomposite. Furthermore, the optimum ratio of rGO: TiO2: Ni in the hybrids was 10:1:4, while the higher Ni ratio would decrease the photocatalytic activity. The stability of the photocatalyst was also verified during 8 cycles of photocatalytic reactions. The kinetic study revealed the nature of the integrated reaction and the controlling step governing the reaction sequence. .

Here is analysed the process of water re-injection in the two hydrocarbon reservoirs/fields in the Upper Miocene sandstone reservoirs, located in the western part of the Sava Depression (Croatia). Namely, those are the "A" field with "L" reservoir and the "B" field with "K" reservoir. Both currently produce hydrocarbons using a secondary recovery method, i.e. water injection (in fact re-injection of the field waters). Three regional reservoir variables had been analysed, namely porosity, permeability and injected water volumes. The number of data was small in all three cases. For porosity: reservoir “L” included 25 data, reservoir “K” 19 data; for permeability: reservoir “L” 10 data, reservoir “K” 18 data; for injected volumes of water: reservoir “L” 10 data; reservoir “K” 3 data. It defined selection of mapping algorithms mostly designed for small datasets (less than 20 points), i.e. Inverse Distance Weighting, Nearest and Natural Neighbourhood. Additionally, the Ordinary Kriging was used, but only with jack-knifed variograms, producing many “artificial points”. Results are extensively tested, using cross-validation and shape recognitions, and the Inverse Distance Weighting method is described as the most appropriate approach for mapping permeability and injected volumes in both reservoirs (“K” and “L”). The Kriging could be slightly outlined as the best approach for porosity. Obtained maps made possible application of the modified geological probability calculation as tools for prediction of successfulness of future injection (probability of 0.56). Consequently, results made possible to plan future injection more efficiently, with smaller injected volumes and same of higher hydrocarbon recovery. That could prevent useless injection, decrease number of injection wells, and save energy and funds invested in such processes.

Tryptanthrin has not been widely applied in clinical practice due to its poor solubility and low bioavailability in spite of possessing several biological and pharmacological activities. Here, to improve the solubility of tryptanthrin, two types of novel tryptanthrin-loaded micelles were prepared. One was tryptanthrin physically encapsulated by distearoyl phosphatidylethanolamine polyethylene glycol (DSPE-PEG) and the other was pegylated tryptanthrin synthesized by acid-sensitive hydrazone bond and further prepared as micelles. Molecular imprinting technology was used to separate pegylated tryptanthrin and free mPEG-COOH in the preparation of PEGylated tryptanthrin micelles with considerably high separation efficiency. The solubility of tryptanthrin-loaded DSPE-PEG micelles (TDMs) and PEGylated tryptanthrin micelles (PTMs) was increased by 300 and 1493 fold compared with that of tryptanthrin, respectively. The PTMs increased the solubility of tryptanthrin more effectively and 95% of tryptanthrin was released from PTMs at pH 5.5 in 12 h. The cytotoxicity of PTMs decreased under physiological conditions compared with that of tryptanthrin, whereas at pH 5.5, the PTMs showed comparable cytotoxicity with that of tryptanthrin, indicating successful drug release from the carrier in response to tumor cell pH. Overall, we elucidated an efficient method to improve water solubility of tryptanthrin and indicated pegylated tryptanthrin is a promising prodrug.

Legionnaires’ disease is normally acquired by inhalation of legionellae from a contaminated environmental source. Water systems of large buildings, such as hospitals, are often contaminated with legionellae and therefore represent a potential risk for the hospital population. In this study, we demonstrated the constant presence of Legionella in water samples from the water system of a large university hospital in Messina (Sicily, Italy) consisting of 11 separate pavilions during a period of 15 years (2004-2018). In total, 1346 hot water samples were collected between January 2004 and December 2018. During this period, to recover Legionella spp. from water samples the standard procedures reported by the Italian Guidelines emanated in 2000 were adopted; from May 2015 to 2018 Italian Guidelines revised in 2015 (ISS, 2015), were used. The most water samples (72%) were positive to L. pneumophila serogroups 2-14 whereas L. pneumophila serogroup 1 accounted for the 18% and Legionella spp. for the 15%. Most of the positive samples were found in the buildings where are situated critical wards as ICU, Neurosurgery, Surgeries, Pneumology and Neonatal Intensive Unit Care. We highlighted the importance of a continuous monitoring of hospital water samples to prevent the potential risk of nosocomial legionellosis.

This review analyzes the preparation and characterization of metal organic frameworks (MOFs) and their application as photocatalysts for water purification. The study begins by highlighting the problem of water scarcity and the different solutions for purification, including photocatalysis with semiconductors such as MOFs. It also describes the different methodologies that can be used for the synthesis of MOFs, paying attention to the purification and activation steps. The characterization of MOFs and the different approaches that can be followed to learn on the photocatalytic processes are also detailed. Finally, the work reviews literature focused on the degradation of contaminants from water using MOF-based photocatalysts under light irradiation.

Deoxynivalenol (DON) is a well-known mycotoxin, responsible for outbreaks of gastrointestinal disorders in Japan. Fusarium graminearum, a parasite of cereal crops, produces this toxin and this is one of the reasons why it is important to understand its metabolism. It is possible to predict the mold’s color change and the quantity of DON synthesized throughout its lifecycle. Furthermore, a_w has been found to affect the amount of DON. This study aimed to analyze the potential of F. graminearum surface color as a predictor of DON concentration at a_w = 0.94, 0.97 and 0.99. Thus, 36 specimens were incubated at 25 °C, 12 at each a_w. After 4, 8, 12 and 16 days, 3 specimens from each a_w were collected for color analysis and DON quantification. For color analysis, photos were taken and red, green and blue (RGB) channels were measured on ImageJ software. DON was quantified through liquid chromatography (HPLC). Color changes were only observed at a_w = 0.99 because at lower a_w the molds presented high growth of white mycelium. Yet, DON increased in all cases. It was only possible to relate the colors with DON concentration at a_w = 0.99, where they presented inverse proportionality.

The power generation from hydroelectric plants has increased worldwide, contributing to the participation of the renewable sources to the energy matrix. In the semiarid Brazilian Northeast (NEB), thousands of small dams have been built over time as a solution for water supply. Although incompatible with hydropower generation due to the conflict with human water supply in the region, small reservoirs accumulate water and hydraulic energy at high altitudes. In this work, simulations were performed to assess how the arrangement of various sized reservoirs impact the power demand for water distribution in the Banabuiú River Basin – BRB (19,800 km²), Brazil. The power required to pump water from all 1,405 reservoirs to the districts is 6.5 GWh/year, whereas in the scenario with the 12 larger strategic reservoirs only, the power demand reaches 45.3 GWh/year. Although representing roughly 60% of the water availability of the BRB and being able to supply all the districts, the Arrojado Lisboa reservoir alone would demand 195 GWh/year to supply water to the entire basin, i.e. 30 times the power required in the real reservoir arrangement. By storing water at high altitudes and distributing it spatially, the small reservoirs increase the energy efficiency on the water distribution system.

A new chiral Mn-salen catalyst, functionalized with a long aliphatic chain and a choline group, able to act as surfactant catalyst for green epoxidation in water, is here described. This catalyst was employed with a commercial surfactant (CTABr) leading to a nanoreactor for the enantioselective epoxidation of some selected alkenes in water, using NaClO as oxidant. This is the first example of nanoreactor for enantioselective epoxidation of non-functionalized alkenes in water.

In the ambitiously evolving construction industry of Kuwait, characterized by its vision 2035 and rapid technological integration, there exists a pressing need for advanced analytical frameworks. This research paper introduces a groundbreaking deep learning approach utilising an autoencoder neural network to analyse the complexities of the Kuwait Construction Market and identify data irregularities. The construction sector’s significant investment influx and project expansion make it an ideal candidate for deploying sophisticated analytical techniques to detect anomalous patterns indicating inefficiencies or unveiling potential opportunities. Our approach leverages the capabilities of autoencoder architectures to delve into and understand the prevalent patterns in market behaviours. This meticulous analysis allows for the detection of deviations that may lead to operational or financial consequences. We elucidate the mathematical foundations of autoencoders, highlighting their proficiency in managing the complex, multidimensional data typical of the construction industry. Through training on an extensive dataset—comprising variables like market sizes, investment distributions, and project completions—our model demonstrates its ability to pinpoint subtle yet significant anomalies. The outcomes of this study enhance our understanding of deep learning’s pivotal role in construction and building management. Additionally, our findings proactively sketch the future market trajectory and facilitate anomaly detection, thereby contributing substantially to the academic discussion on integrating machine learning into construction management. This research offers valuable insights for professionals within Kuwait, aiming to harness deep learning techniques to boost operational efficiency and strategic foresight in the construction sector.

In the rapidly advancing field of Artificial Intelligence (AI), this study presents a critical evaluation of the resilience and cybersecurity efficacy of leading AI models, including ChatGPT-4, Bard, Claude, and Microsoft Copilot. Central to this research is the use of innovative adversarial prompts designed to rigorously test the content moderation capabilities of these AI systems. The study introduces new types of adversarial tests and the Response Quality Score (RQS), a metric specifically developed to assess the nuances of AI responses. Additionally, the research spotlights FreedomGPT, an AI tool engineered to optimize the alignment between user intent and AI interpretation. The empirical results from this investigation are pivotal for assessing the current robustness and security of AI models. They highlight the necessity for ongoing development and meticulous testing to bolster AI defenses against an array of adversarial challenges. Importantly, the study also delves into the ethical and societal implications associated with employing advanced 'jailbreak' techniques in AI testing. The findings are significant for understanding AI vulnerabilities and formulating strategies to enhance the reliability and ethical soundness of AI technologies, paving the way for safer and more secure AI applications.

Contrast agents developed for X-ray computed tomography (CT) offer extremely valuable tools and techniques in diagnostics via contrast enhancements. Heavy metal-based nanoparticles (NPs) can provide high contrast in CT images. These result from a high density of heavy metal atoms with high X-ray attenuation coefficients that exceed that of iodine (I), which is currently used in hydrophilic organic CT contrast agents. Nontoxicity and colloidal stability are vital characteristics in designing heavy metal-based NPs as CT contrast agents. In addition, the particle size must be small for in vivo renal excretion. In vitro phantom imaging studies can provide X-ray attenuation efficiency, which is a critical parameter for CT contrast agents, and the imaging performance of CT contrast agents can be demonstrated via in vivo experiments. This review focuses on in vitro and in vivo studies of various heavy metal-based NPs (metal: Au, Pt, Pd, Ag, Ce, Gd, Dy, Ho, Yb, Ta, W, and Bi) and provides an outlook on their use as high-performance CT contrast agents.

Paratuberculosis (PTB) is a chronic granulomatous enteritis caused by Mycobacterium avium subsp. paratuberculosis (MAP) that affects a wide variety of domestic and wild animals. It is considered as one of the diseases with the highest economic impact in the ruminant industry. Despite many efforts and intensive research, PTB control is still controversially discussed and diagnostic and immunoprophylactic tools lack great limitations. Thus, models play a crucial role in understanding the pathogenesis of infection and disease, and in testing novel vaccine candidates. Here, we review the potential and limitations of different experimental approaches currently used in PTB research, focusing on laboratory animals and cell based models. The aim of this review is to offer a vision of the models that have been used and what has been achieved or discovered with each one so that the reader can choose the best model to answer their scientific questions and prove their hypotheses. Also, we bring forward new approaches that we consider worth exploring in the near future.

Based on the historical research on the shape of armor in Ming Dynasty, this paper explores the shape characteristics of general armor in Ming Dynasty in China through field research on the general stone statue of Ming Xiaoling Mausoleum in Nanjing. Through Ming Xiaoling Mausoleum general stone carving 3D animation technology restoration project, virtual material heritage practice is carried out. Through the modeling of the general stone statue in Ming Xiaoling Mausoleum by MAYA and Zbrush, UE4 realizes the construction of scenes and the output of interactive effects, so as to explore a mode of application engine animation that can preserve and propagate general stone carving in Ming Xiaoling Mausoleum.

Understanding surface water evaporation in tropical catchments is pivotal for effective water management, but limited research exists on stable isotopic (δ2H and δ18O) assessment of water evaporation losses. Our study bridges that gap, examining stable isotopes in meteoric water and surface waters across tropical regions, both humid and semi-arid. Using the Craig-Gordon model, we calibrated evaporation-to-inflow (E/I) ratios, identifying distinct E/I variations between seasons and regions. Notably, the semi-arid region consistently exhibited higher E/I ratios due to climatic characteristics. By integrating the Hamiltonian Monte Carlo and the No-U-Turn Sampler, we were able to quantify uncertainties in isotopic and meteorological parameters, resulting in E/I estimates within 68% and 95% confidence intervals. Our Bayesian model insights are critical for freshwater resource optimization and hydrological modeling in tropical regions.

Dental healthcare providers, staff and patients are constantly exposed to the risk of infection or cross-infection in the dental office, particularly due to the formation of biofilms within Dental Unit Waterlines (DUWLs). Good water quality, achieved with environmentally friendly means, is essential in ensuring the safe operation of the clinic. The aim of this study was to evaluate the practices and protocols used in dental offices of Metropolitan Athens in Greece with regards to water quality in DUWLs. The questionnaire about water quality was distributed to dental practitioners in 2022 and was completed by 206 dentists. Water supplied to dental units was mainly from the public network (65.0%), with 55.8% using in-office filtration. Most dentists (71.8%) do not know the active substance of the antiseptic used for the DUWLs, while 96.1% reported having an antiseptic reservoir embedded in the dental unit. Daily flushing with a small and a large amount of fluid was practiced in approximately 83% and 61% of dental offices, respectively. Dental associations should raise awareness regarding water quality and maintenance of DUWLs in dental offices, investing in lifelong learning, while implementing protocols and green strategies.

The pressure on freshwater resources is leading to diminishing flows in some of the critical river systems across the globe and India is no exception and this is mainly because of water withdrawal for irrigation, which is often to the tune of 70% to 80% with some proportion for domestic and industrial use. While graduating from the concept of environmental flows and its assessment methodologies in India, the water-managers, the researchers and the conservationists are now moving towards answering the next question if the rivers are to be revived, then where will the water come from, especially in the case of over-allocated rivers, including the river Ganga. While the logical way is to look at the biggest user of water, i.e. irrigation, it remains to be seen whether the irrigation water savings will actually lead to enhancing flows in a river, complementing the efforts towards maintaining e-flows in rivers, or whether it will lead to more area under agriculture, bring changes in cropping patterns towards more water-intensive crops or result in something else. This is a growing debate across the globe, where India is no exception, and there has been a wide range of opinions in this regard. This paper discusses the process, findings and lessons from a joint initiative involving farmers, the Uttar Pradesh state Irrigation and Water Resources Department, Bijnor District Administration and a conservation organisation to enhance flows in a rivulet, called karula River, which is part of the Ganga river system.

A discharge mixing zone (DMZ) is a defined geographical area or volume of water in the receiving environment of a discharge where initial dilution of the effluent occurs and where exceedance of water quality criteria may be permitted. DMZs are essential to inform determination of discharge consent conditions and an important element of risk management frameworks to reduce any effects of the discharges on the environment and human health. In this review, we describe the principles and technical application of DMZs. We present an overview of the physical processes that govern the dispersion and dilution of wastewater discharges and the fate of contaminants in coastal environments and define key criteria for determining the size of DMZs. We summarize DMZ requirements in international legislation and guidance and exemplify their application to different types of discharges by means of case studies. The selected case studies illustrate different modelling tools for defining DMZs and different monitoring approaches to assess their effectiveness in achieving ecological and human health objectives.

The sustainable use of precious water resources requires effective water management. In the European Union, water management is mainly regulated by the Water Framework Directive (2000/60/EC), introducing an integrated river basin management approach. As EU directive, the legislation needs to be implemented in the Member States, entailing not only legal transposition, but also application and enforcement in Member States. One major instrument introduced by the Water Framework Directive is the environmental goal achievement obligation of art. 4 WFD, containing also a deterioration ban with several exemptions. This study compares transposition, application and enforcement of the exemption of permanent deterioration (art. 4 (7) WFD) in the context of the environmental goal achievement obligation regime in Lower Saxony (Germany) and the Netherlands. The study rests on a legal analysis of literature, policy documents and jurisprudence. Although based on the same EU directive wording and case law of the European Court of Justice, the deterioration ban and the exemption of permanent deterioration are implemented rather differently: While the deterioration ban is predominantly understood as planning obligation in the Netherlands, it became an important permit requirement in Lower Saxony since the Weser-ruling of the European Court of Justice.

This paper reviews the design and component of two types of RWHS, namely roof harvesting system (RHS) and pond harvesting system (PHS). The performance in terms of quantity and quality of collected rainwater and energy consumption for RWHS with different capacities were evaluated, as well as the benefits and challenges particularly in environmental, economic and social aspects. Presently, RHS is more commonly applied but its effectiveness is limited by its small scale. The PHS is of larger scale and has greater potentials and effectiveness as an alternative water supply system. Results also indicate the many advantages of PHS especially in terms of economics, environmental aspects and volume of water harvested. While RHS may be suited to individual or existing buildings, PHS has greater potentials and should be applied in newly developed urban areas with wet equatorial climate.

The success of source protection in ensuring safe drinking water is centered around being able to understand the hazards present in the catchment then plan and implement control measures to manage water quality risk to levels which can be controlled through downstream barriers. The programs in place to manage source protection are complex sociotechnical systems involving policy, standards, regulators, technology, human factors and so on. This study uses System Theoretic Process Analysis (STPA) to analyze the operational hazards of a typical drinking water source protection (DWSP) program and identify control measures to ensure safe operations. To validate the results a questionnaire was developed and distributed to specialists in DWSP in Taiwan, Australia and Greece. Using Principle Components Analysis (PCA) of the questionnaire responses, the study identified four critical success factors (CSFs) for DWSP. The four factors identified are ‘Policy and Government Agency Support of Source Protection’, ‘Catchment Risk Monitoring and Information’, ‘Support of Operational Field Activities’ and ‘Response to Water Quality Threats’. The results of this study provide insight into the approach of grouping of source protection measures to identify a series of targeted CSF for operational source protection programs. Using CSF can aide catchment management agencies in ensuring that the risk level in the catchment is managed effectively and that threats to public health from drinking water are managed appropriately.

Agriculture and farming worldwide are responsible for numerous environmental threats, including degradation of land and water resources depletion. Underlining the dynamic interaction between bio-physical and socio-economic drivers is the key towards a more sustainable land and water management. With regard to a highly developed agricultural area in southern Italy, multi-regression models were developed to interpret the observed inter-annual variability of cropped land. Main drivers related to Common Agricultural Policy support, product market prices, crop yield and irrigation water availability were investigated. The adopted models revealed the different weighs of each driver. The findings reported the role that direct payments played in supporting the extension of irrigated crops, such as processing tomato. Likewise, the models pointed to decoupled payment scheme as the most important driver of change in the crop pattern over the last years.

This paper presents a strategic planning model aimed at optimizing the economic and environmental impacts of Palm Oil Mill Effluent (POME) treatment systems. The model determines the optimal selection of POME treatment systems to minimize environmental impact, specifically focusing on three systems: Anaerobic Digester Tank System (ADT), Covered Lagoon System (CL) with biogas capture, and Open Pond System (OP). The model incorporates constraints related to Fresh Fruit Bunch (FFB) production, POME generation, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), and Carbon Dioxide (CO2) emissions. The optimization framework, formulated as a mixed-integer linear programming (MILP) model, is solved using the GAMS 40.1.0 software. Integer decision variables are used to represent the choice of POME treatment systems that minimize environmental impact. The study specifically considers the ADT, CL, and OP systems, with results indicating that the ADT system is the most effective in reducing BOD, COD, and CO2 equivalent emissions, thereby highlighting its environmental benefits. The model has selected the ADT treatment system, which exhibits the lowest COD, BOD and CO2e emissions. Specifically, the COD registered an 85% reduction rate from 84,830 mg/L to 12,725 mg/L. The BOD level was reduced by 88% resulting in a BOD level from 41,208 mg/L to 4,945 mg/L. The minimum CO2e emission that can be archived was about 3,034 t CO2e per annum. This model provides a valuable tool for governmental agencies and policymakers to guide the private sector in developing environmentally sustainable POME treatment strategies.

This paper explores the application of Blockchain technology in food traceability, focusing specifically on olive oil. It addresses the significant challenges in the food industry, such as verifying authenticity and detecting harmful substances. The research highlights the potential of Blockchain to enhance traceability by leveraging its decentralized and secure architecture, which en-sures data integrity and facilitates rapid monitoring throughout the supply chain. The paper also examines the synergy between Blockchain and the Internet of Things (IoT), which is critical for real-time tracking in product production. The research conducted has led to a practical demonstration through a web application connected to the Ethereum test network, designed for the quality control of olive oil via smart contracts. Overall, this study provides a comprehensive analysis of Blockchain technology and its transformative potential in ensuring food traceability, particularly for high-value commodities like olive oil.

The potential of technical lignins slow pyrolysis is briefly summarized. The pyrolysis process, which can be self-sustained by burning the co-produced gas, can primarily produce high-quality biochar in significant amounts, to be used as a fuel and as a reductant in metallurgy. Together, significant amounts of bio-oil can be produced, rich in guaiacols, which are commercial and expensive chemicals produced today via petrochemical routes and used in pharmacology, food chemistry, polymer chemistry, etc. Such compounds or bio-oil itself can also be converted by hydrodeoxygenation into biofuels.

Waste cooking oil (WCO) recycled asphalt is facing issues regarding insufficient thermal oxidation stability and aging resistance. In this research, glycerol esterification was adopted to pretreat WCO, and the consequences of this treatment on the aging resistance and thermal stability of WCO were analyzed. The impacts of varying levels of esterification of WCO on the high-temperature, low-temperature performances, fatigue properties, as well as aging resistance of recycled asphalt were investigated. Furthermore, the mechanisms of regeneration and anti-aging of deeply esterified WCO recycled asphalt were revealed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) tests. The results indicated that variations in the physical properties of WCO during the aging process were reduced, and its aging resistance was improved following glycerol esterification therapy. The initial thermal decomposition temperature was increased by approximately 115°C, which resulted in the enhancement of thermal stability significantly. Recycled asphalt obtained from deeply esterified WCO exhibited superior high-temperature, low-temperature performances and fatigue properties. Moreover, the thermal oxidation stability and aging resistance of recycled asphalt with deep-esterified WCO could be promoted by reducing the oxidation and volatilization of light components during the aging process.

The distribution of oil and gas phases around ball-raceway local regions is an important basis and foundation for determining whether a bearing is sufficiently lubricated. To obtain the oil phase distribution law in the inner raceway-ball contact local region (IBCR) and outer raceway-ball contact local region (OBCR) of the under-race lubrication ball bearing, the numerical simulation method is used. The effects of bearing rotation speed, oil flow rate, oil viscosity and oil density on these two regions are studied. The results indicate that the oil phase exhibited significant periodic changes in both time and space. Compared with that in the IBCR, the oil phase distribution in the OBCR is more uniform. Increasing the bearing rotation speed and reducing the oil flow rate made the IBCR and OBCR more uniform. Changing the oil viscosity only alters the distribution pattern of the OBCR. The oil density may not affect the fluid flow state or the oil phase distribution in the bearing.

This work aims to investigate the effect of process temperature and catalyst content by thermochemical degradation of municipal solid waste (MSW) fraction (organic matter + paper + plastic) on the yield of reaction products (bio-oil, biochar, H2O and gas), physi-cochemical properties and chemical composition of bio-oils, as well as on the morphol-ogy and crystalline phases of biochar in laboratory scale. The organic matter, paper and plastic segregated from the gravimetric composition of total waste sample were subject-ed to the pre-treatments of drying, crushing and sieving. Thermal pyrolysis was per-formed at 400, 450 and 475 °C and 1.0 atmosphere, and catalytic pyrolysis at 450°C and 1.0 atmosphere, using 5.0, 10.0 and 15.0% (wt.) of FCC zeolite, bath mode, using a laboratory-scale borosilicate glass reactor. The bio-oil was characterized for acidic val-ue. The chemical functions present in the bio-oil identified by FT-IR and the composi-tion by GC-MS. Biochar was characterized by SEM/EDS and XRD. Thermal pyrolysis of the MSW fraction shows bio-oil yields between 9.44 and 9.24% (wt), aqueous phase yields between 21.93 and 18.78% (wt), solid phase yields between 67.97 and 40.34% (wt) and gas yields between 28.27 and 5.92% (wt). The bio-oil yield decreased with in-creasing process temperature. For the experiments using FCC, the biochar and gas yields slightly increased with increasing FCC content, while that of bio-oil decreased and the H2O phase remained constant. GC-MS of bio-oils identified the presence of hy-drocarbons and oxygenates, as well as nitrogen-containing compounds including am-ides and amines. The acidity of the bio-oil increased with increasing temperature and with the aid of FCC as a catalyst. The presence of hydrocarbons in bio-oil was identified by the addition of FCC catalyst due to the deoxygenation of carboxylic acids, followed by decarboxylation and decarbonylation reactions, producing aliphatic and aromatic hydrocarbons.

This study examines the aggregate consumption function of Saudi Arabia from 2000 to 2022, focusing on identifying key determinants of household consumption and evaluating the impacts of disposable income, household wealth, government expenditure, interest rates, and oil revenues. The research uses advanced econometric methods, including the Autoregressive Distributed Lag (ARDL) model and Johansen cointegration test, to analyze the relationships among these variables. The findings reveal that disposable income, household wealth, and government expenditure significantly and positively influence consumption, whereas interest rates show a negative correlation. Oil revenues also play a critical role, reflecting the country's economic reliance on oil. The study highlights the necessity for economic diversification to reduce the impact of oil price volatility on household income and consumption stability. The results offer crucial insights for policymakers, emphasizing the need for strategies that enhance household income and wealth, maintain robust public sector spending, and effectively manage interest rates. These findings also support the importance of consistent and predictable income sources for sustaining consumption. Additionally, this study suggests directions for future research, including developing sophisticated forecasting models to predict consumption trends and exploring other influencing factors such as demographic shifts and technological progress.

The objective of this research was to study the drying kinetics of passion fruit seeds, which are a byproduct of the industrial processing of passion fruit, with the potential to produce byproducts such as oil and flour. After drying, the seeds were directed for cold-press oil extraction, and the quantification of fatty acids was performed. Following the oil extraction, the residues underwent a grinding process to produce flour, which was characterized in terms of its nutritional aspects. The drying process was conducted using an experimental forced convection dryer with controlled temperatures of 40, 50, 60, and 70 °C, and a drying air velocity of 1.5 m s-1. This work introduced a novel approach using mathematical models, all derived from Fick's equation. For each model, the activation energy and thermodynamic properties related to the drying procedure were determined. Fatty acids in the oils and physicochemical characteristics of the defatted residue's flour were also analyzed. The Cavalcanti Mata, Henderson &amp; Pabis, and Page models modified by Cavalcanti Mata were found to best fit the experimental data. The highest proportions of unsaturated fatty acids in passion fruit oil were linoleic acid (Omega-6) at 68.8% and oleic acid (Omega-9) at 16.1%. The predominant saturated fatty acid was palmitic acid at 10.61%, with no significant differences observed in relation to the drying temperatures. It can be concluded that the composition of the flour from the residue of passion fruit grain oil extraction varies in terms of crude fiber content, ranging from 56.36% to 58.8%, and protein content, ranging from 15.6% to 18.26%, with significant differences observed concerning the drying temperatures. The lipid content varied from 13.5% to 13.76%, with no significant differences observed across the evaluated drying temperature variations.

This paper presents the fabrication and characterization of cylindrical capacitors utilizing magnetodielectric materials composed of magnetizable microfibers dispersed within a silicone oil matrix. The microfibers, ranging in diameter from 0.25 to 2.20 μm, comprise hematite (α-Fe2O3), maghemite (γ-Fe2O3), and magnetite (Fe3O4). The study investigates the electrical behavior of these capacitors under the influence of an external magnetic field superimposed on a medium-frequency alternating electric field, across four distinct volume concentrations of microfibers. Electrical capacitance and resistance measurements are conducted every second over a 60-second interval, revealing significant dependencies on both the quantity of magnetizable phase and the applied magnetic flux density. Furthermore, the temporal stability of the capacitors’ characteristics is demonstrated. The obtained data are analyzed to determine the electrical conductance and susceptance of the capacitors, elucidating their sensitivity to variations in microfiber concentration and magnetic field strength. To provide theoretical insight into the observed phenomena, a model based on dipolar approximations is proposed. This model effectively explains the underlying physical mechanisms governing the electrical properties of the capacitors. These findings offer valuable insights into the design and optimization of magnetodielectric-based capacitors for diverse applications in microelectronics and sensor technologies.

The oil and gas industry in Nigeria, a vital contributor to the nation's economy, has long been associated with significant environmental challenges. Pollution, habitat destruction, and greenhouse gas emissions have raised global concerns about sustainability and corporate responsibility. This empirical study explores the relationship between environmental accounting practices and the financial performance of listed oil and gas companies in Nigeria. We investigated eight oil and gas companies that are publicly traded on the Nigerian Stock Exchange Market (NGX) as of January 17, 2022, from 2011 to 2022. The study employs Driscoll-Kraay standard errors and reveals that environmental accounting had significant effects on returns on assets, earnings per share, and liquidity ratio. The study revealed that the implementation of environmental accounting practices had diverse effects on the performance of oil and gas companies in Nigeria. The findings encourage policymakers and stakeholders in the sector to utilise the insights and design more effective regulations and incentives that promote environmental corporate responsibility. Also, valuable insights into the potential benefits and challenges associated with adopting environmental accounting practices, and influencing the decision-making processes of corporate stakeholders were provided to ensure sustainability in terms of improved financial performance of the oil and gas sector in Nigeria.

The development of biofuels and biodiesel industry specifically, has resulted in the generation of large amounts of glycerol as a surplus. The conversion of glycerol, into chemicals with indus-trial interest, through anaerobic fermentation using E. coli as a biocatalyst is an attractive alter-native to improve economic performance in the biodiesel industry, for example through the bi-otransformation of residual glycerol into ethanol. For 2019, the size of the global ethanol market was valued at $ 89.1 billion US dollar. Biodiesel can be produced from several materials like rapeseed, palm, soya, corn, palm kernel, frying oil or olive-pomace oil (OPO). The last, can be extracted from alperujo, byproduct of olive oil process. However, olive-pomace oil converting into biodiesel is not enough established to achieve a global olive-oil/biodiesel derived process with minimized waste generation. Traditionally biodiesel production process produces an equivalent of 10% by mass of glycerol as a waste or by-product. This work explores the conver-sion of residual glycerol into chemicals like ethanol and hydrogen with a focus on projecting raw material potential availability from OPO, contributing to the promotion of the use of biofu-els and biodegradable compounds.

Risk management for technological hazards mainly focuses on the consequences on human lives. Although technological risk analysis evaluates environmental vulnerability, it does not reflect the consequences on environmentally exposed elements, such as rivers, water springs, flora, and fauna. This paper's objective was to propose a conceptual framework and create a multidisciplinary evaluation model for environmental risk analysis in the oil and gas industry. Initially, the problem was approached from a global perspective to justify the necessity of a holistic environmental risk analysis methodology in the oil industry, using environmental risk factors as well as underlying factors, such as environmental fragility and lack of resilience. The holistic assessment was carried out based on probabilistic risk analysis methodologies to obtain a holistic environmental risk index, HERI. This methodology was applied to an oil and gas industry company in Colombia. This allowed greater disaggregation of the results to establish priorities for risk reduction actions and identify the company's weaknesses.

High rates of resistance to antibiotics are associated with healthcare-related infections, thus appealing for the urgent need for effective antimicrobials against these maladies. The present study aims to determine the chemical composition of essential oil (EO) from Clausena anisata leaves, and evaluate their antibacterial activity against selected nosocomial bacteria. Fresh leaves of Clausena anisata were subjected to a steam distillation using a Clevenger apparatus to afford the essential oil. The phytochemical composition of this oil was analyzed using gas chromatography-mass spectrometry (GC-MS). The essential oil was further tested against selected nosocomial bacteria, including Staphylococcus and Klebsiella species, among others, using a microdilution method. As a result, 0.77% of essential oil was extracted from fresh leaves of Clausena anisata. The GC-MS analysis revealed that the as-prepared essential oil contain E-anethole (70.77%), methyl isoeugenol (13.85%), estragole (4.10%), γ-terpinene (3.33%), myrcene (2.82%) and sabinene (0.77%), with E-anethole being the major constituent. Meanwhile, twenty two compounds were identified in the EO of Clausena anisata leaves through gas chromatography. Upon antibacterial test against selected nosocomial pathogens, the E-anethole-rich essential oil exhibited minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values ranging from 3.91 to 125 µg/mL and 7.81 to 125 µg/mL, respectively, indicative of a bactericidal orientation of the plant’s essential oil (MIC/MBC ratio: 4). This novel contribution highlights the scientific validation of the use of Clausena anisata leaves in the traditional treatment of various infectious diseases. However, toxicity and pharmacokinetic studies, mechanistic basis of the antibacterial action, and in vivo antibacterial experiments of the E-anethole-rich essential oil of Clausena anisata should be investigated to successfully use this plant in the treatment of infectious diseases.

The efficiency, durability, and overall performance of a car engine are influenced by several critical factors. The quality and properties of engine oil play a crucial role, and oil is used in internal combustion engines for lubrication and cooling purposes. This research study aimed to compare the impact of fullerene-C60 (99.5%), Fe2O3, and TiO2 nanoparticles on the thermal properties of C.A.L.T.E.X. red engine oil with grades 10W30, 20W40, and 20W50. This study focused on the effect of a nanoparticle concentration of 0.01 wt.% in different engine oil grades at various temperature values of 30-120 ℃. The Nanofluids were prepared using the two-step direct mixing method, employing a magnetic stirrer and an ultrasonicator, ensuring uniform distribution of nanoparticles in the base fluids. The thermal conductivity, thermal diffusivity, and volumetric heat capacity of the base fluids and nanofluids were measured using the FLUCON LAMBDA thermal conductivity meter. Additionally, flash points were measured using the flash point tester. It was concluded that the thermal properties of TiO2 and Fe2O3 showed considerable enhancement; in contrast, Fullerene only showed the 212 ℃ flash point.

This study examined the efficacy of essential oil (EO) obtained from the Australian native plants, lemon myrtle (Backhousia citriodora) (LM) to inhibit Penicillium digitatum by in vitro agar diffusion and vapor assay, and in inoculated oranges. Gas chromatograph/mass spectrometry analysis revealed the main constituent of LM EO as citral. Pure citral was also included in the experiment for com-parison. LM EO at 1, 2, 3, 4 and 5 µL disc-1 in the in vitro tests significantly inhibited fungal growth compared to the non-treated control. Moreover, LM EO at 4 and 5 µL disc-1 in both the assays completely inhibited fungal growth similar to its main component of citral. Inoculated oranges dipped in 1000 μL L-1 LM EO solutions for 5, 10, 15 and 30 sec showed significantly lower fungal wounds compared to control. While higher dipping times generated slight rind injury, a 5 and 10 sec dip did not cause any injury to the fruit rind. The quality assessments and sensory evaluations also revealed that the addition of LM EO did not adversely affect the quality and taste of the oranges. These findings suggest LM EO as an alternative to synthetic fungicides to inhibit wastage in citrus during storage.

(1) Background: In recent years, the increasing demand for alternative food shifted research toward new types of food sources. It is well known that many diseases are caused by oxidative stress, then supplementation of antioxidants can be proposed to reduce it. Cannabis Sativa (CS) is an interesting alternative source of antioxidant species. The use of CS for the extraction of these molecules could be optimized to maximize the antioxidant yield extracts. (2) Methods: This work aimed to investigate extraction methods of CBD oil from CS inflorescences and stalks to obtain antioxidant-enriched compounds for use in food by mixing with a carrier oil like hemp seed oil. Soxhlet (SE), dynamic maceration (DME) and supercritical fluid (SFE) extraction techniques were performed, using CS inflorescences and stalks; by High-Pressure Liquid Chromatography (HPLC) analysis the antioxidants were individuated and quantified; moreover, the antioxidant power was investigated by 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) assays and finally doughs enriched with hemp oil were studied by rheological measurements (3) Results: The best results in terms of CBD yield were obtained by dynamic maceration from only flowers and it also shows a good antioxidant power. (4) Conclusions: Formulation of protein bars with hemp oil enriched in CBD could be an excellent means for the consumption of products enriched with antioxidants because it preserves the CBD anti-inflammatory activity.

Bitumen is produced from non-renewable natural resources, continuously deplete and intrigues researchers to look for alternative binders. Annually, tons of waste engine oil (WEO) and crumb rubber (CR) are discarded unsustainably and pose a significant environmental threat. Adding these industrial waste products to asphalt provides a safe and cost-effective way for their disposal and improves the bitumen's performance in parallel. This study uses various combinations of waste engine oil and crumb rubber with 60/70 penetration grade bitumen to produce a partially synthetic bitumen. Adhesion being one of the critical characteristics of the bituminous binder has been assessed using the bitumen bond strength test along with physical and rheological properties. Results showed that waste engine oil with crumb rubber inclusion increases penetration and decreases the softening point, viscosity, complex modulus, and bonding strength. Additionally, polyphosphoric acid (PPA) in smaller dosages was also incorporated into the optimum percentage of CR + WEO to improve the properties of the binder. The results confirm that binder modification with waste engine oil and crumb rubber can be more effective with PPA. It is concluded that 35% of waste can replace the virgin binder giving a cost-effective and environmentally friendly solution.

Three carbon-chain extension genes associated with fatty acid synthesis in cotton, namely GhKAR, GhHAD, and GhENR, play important roles in oil accumulation in cotton seeds. In the present study, these three genes were cloned and characterized. The expression patterns of GhKAR, GhHAD and GhENR in the high seed oil content cultivars 10H1007, 10H1014, and 10H1041 differed somewhat compared with those of 2074B with low seed oil content at different stages of seed development. GhKAR showed all three cultivars showed higher transcript levels than that of 2074B at 10, 40 and 45 DPA. The expression pattern of GhHAD showed a lower transcript level than that of 2074B at both 10 and 30 DPA but higher transcript level than that of 2074B at 40 DPA. GhENR showed a lower transcript level than that of 2074B at both 15 and 30 DPA. The highest transcript levels of GhKAR and GhENR were detected at 15 DPA in 10H1007, 10H1014, and 10H1041 compared with 2074B. From 5 to 45 days post anthesis (DPA) cotton seed, the oil content accumulated continuously in the developing seed. Oil accumulation reached the peak at 40 DPA to 45 DPA and slightly decreased in mature seed. In addition, GhKAR and GhENR showed different expression patterns in fiber and ovule development processes, in which they showed high expression levels at 20 DPA during fiber elongation stage, but their expression level peaked at 15 DPA during ovule development processes. These two genes showed the lowest expression levels at the late seed maturation stage, while GhHAD showed peak at 10 DPA of fiber development. Compared to 2074B, the oil contents of GhKAR and GhENR overexpression lines increased 1.05~1.08 folds. These results indicated that GhHAD, GhENR and GhKAR were involved in both seed oil synthesis and fiber elongation with dual biological functions in cotton.