Domestic cats (Felis catus) are widespread worldwide as the most popular pets. This medium-sized carnivore have well-known negative effects on biodiversity, but there is still need to better understand the proximate causes of its predation. Based on a citizen science project, we assessed the role of spatiotemporal (i.e., latitude, longitude and seasons), climatic (i.e., rainfall), anthropogenic (i.e., human footprint, HFI) and individual (i.e., sex and age) variables on the number of preys returned home by cats in metropolitan France. Over the 5 048 cats monitored between 2015 and 2022, prey from 12 different classes (n= 36 568) were returned, being 68% mammals, 21% birds and 8% squamates. Shrews brought home by cats peaked during summer, while rodents were recorded during summer-autumn. Birds brought home by cats peaked in spring-summer and in autumn, and lizards in spring and in late summer. Lower HFI was associated with more voles and mice brought home and the opposite trend was observed for lizards and birds. Younger cats were more prone to bring home shrews, birds and reptiles. Although environmental factors play a minor role in prey brought home by cats, some geographical characteristics of prey species distribution partly explains the hunting behaviour of cats.

This paper focuses on quantifying the economic and financial viability of NB-IoT and LoRaWAN technologies, two low-power wide-area network (LPWAN) technologies with unique characteristics that make them suitable for IoT applications. The purpose of the study is to propose an artefact for performing life cycle cost analysis and demonstrate its application to these technologies. The methodology uses pragmatic computational tools to facilitate the analysis and considers all relevant economic and financial factors, such as operating costs, equipment costs, and revenue potential. The main finding of the study is that NB-IoT and LoRaWAN technologies have different cost structures and revenue potentials, which may affect their economic and financial viability for different IoT applications. Ultimately, the study concludes that a comprehensive life cycle cost analysis is critical to making informed decisions about technology adoption, and that the proposed methodology can be applied to other IoT technologies to gain insight into their economic and financial viability.

Analysing and understanding donor behaviour in Non-profit Organisations (NPOs) is challenging due to the lack of human and technical resources. Machine learning (ML) techniques can analyse and understand donor behaviour at a certain level; however, it remains to be seen how to build and design an Artificial Intelligence enabled Decision Support System (AI-enabled DSS) to analyse donor behaviour. Thus, this paper proposes an AI-enabled DSS conceptual design to analyse donor behaviour in NPOs. A conceptual design is created following a Design Science Research approach to evaluate an AI-enabled DSS's initial DPs and features to analyse donor behaviour in NPOs. The evaluation process of the conceptual design applied formative assessment through conducting interviews with stakeholders from NPOs. The interviews were conducted using the Appreciative Inquiry framework to facilitate the process of interviews. The results of analysis based on the interviews provide insightful information not only about the proposed conceptual design for an AI-enabled DSS, but also about what is required to analyse donor behaviour NPOs using DSS. Evaluating the conceptual design results recommend efficiency, effectiveness, flexibility, and useability in the requirements of the AI-enabled DSS. This research contributes to the design knowledge base of AI-enabled DSS for analysing donor behaviour in NPOs. Future research will combine theoretical components to introduce a practical AI-enabled DSS for analysing donor behaviour in NPOs. This research is limited to such analysis on donors who donate money or volunteer time for NPOs.

Mining and analysis of the Big Data of Twitter conversations have been of significant interest to the scientific community in the fields of healthcare, epidemiology, big data, data science, computer science, and their related areas, as can be seen from several works in the last few years that focused on sentiment analysis and other forms of text analysis of Tweets related to Ebola, E-Coli, Dengue, Human papillomavirus (HPV), Middle East Respiratory Syndrome (MERS), Measles, Zika virus, H1N1, influenza-like illness, swine flu, flu, Cholera, Listeriosis, cancer, Liver Disease, Inflammatory Bowel Disease, kidney disease, lupus, Parkinson's, Diphtheria, and West Nile virus. The recent outbreaks of COVID-19 and MPox have served as "catalysts" for Twitter usage related to seeking and sharing information, views, opinions, and sentiments involving both these viruses. While there have been a few works published in the last few months that focused on performing sentiment analysis of Tweets related to either COVID-19 or MPox, none of the prior works in this field thus far involved analysis of Tweets focusing on both COVID-19 and MPox at the same time. With an aim to address this research gap, a total of 61,862 Tweets that focused on Mpox and COVID-19 simultaneously, posted between May 7, 2022, to March 3, 2023, were studied to perform sentiment analysis and text analysis. The findings of this study are manifold. First, the results of sentiment analysis show that almost half the Tweets (the actual percentage is 46.88%) had a negative sentiment. It was followed by Tweets that had a positive sentiment (31.97%) and Tweets that had a neutral sentiment (21.14%). Second, this paper presents the top 50 hashtags that were used in these Tweets. Third, it presents the top 100 most frequently used words that are featured in these Tweets. The findings of text analysis show that some of the commonly used words involved directly referring to either or both viruses. In addition to this, the presence of words such as "Polio", "Biden", "Ukraine", "HIV", "climate", and "Ebola" in the list of the top 100 most frequent words indicate that topics of conversations on Twitter in the context of COVID-19 and MPox also included a high level of interest related to other viruses, President Biden, and Ukraine. Finally, a comprehensive comparative study that involves a comparison of this work with 49 prior works in this field is presented to uphold the scientific contributions and relevance of the same.

The exoskeleton technology has been rapidly advancing in the recent past due to its multitude of applications and diverse use-cases in assisted living, military, healthcare, firefighting, and industry 4.0. The exoskeleton market is projected to increase by multiple times of its current value within the next two years. Therefore, it is crucial to study the degree and trends of user interest, views, opinions, perspectives, attitudes, acceptance, feedback, engagement, buying behavior, and satisfaction, towards exoskeletons, for which the availability of Big Data of conversations about exoskeletons is necessary. The Internet of Everything style of today's living, characterized by people spending more time on the internet than ever before, with a specific focus on social media platforms, holds the potential for the development of such a dataset, by the mining of relevant social media conversations. Twitter, one such social media platform, is highly popular amongst all age groups, where the topics found in the conversation paradigms include emerging technologies such as exoskeletons. To address this research challenge, this work makes two scientific contributions to this field. First, it presents an open-access dataset of about 140,000 tweets about exoskeletons that were posted in a 5-year period from May 21, 2017, to May 21, 2022. Second, based on a comprehensive review of the recent works in the fields of Big Data, Natural Language Processing, Information Retrieval, Data Mining, Pattern Recognition, and Artificial Intelligence that may be applied to relevant Twitter data for advancing research, innovation, and discovery in the field of exoskeleton research, a total of 100 Research Questions are presented for researchers to study, analyze, evaluate, ideate, and investigate based on this dataset.

Place-based education (PBE) and active learning are effective strategies for geoscience education. However, traditional PBE via field trips requires significant resources, time, physical abilities, and expertise of teachers. We provide an alternative PBE experience by showing how different kinds of geoscience videos can be spatially organized into one digital interactive virtual environment. Here, we present the Google Earth Geoscience Video Library (GEGVL) which uses Google Earth and location specific videos about Earth events to create a virtual PBE experience. Using Google Earth, GEGVL organizes place-based videos by locations and links pertinent non-place-based videos and allows users to roam the globe in search of geoscientific videos that are pertinent to them or their students. Currently GEGVL contains 150 videos organized into ten different geoscience disciplines: Plate Tectonics, Minerals, Structural Geology, Metamorphism, Magmatism, Hydrology, Environmental Science, Sedimentology, Paleontology, and Paleomagnetism. Despite stability challenges with Google Earth integration, results of user surveys among lower division undergraduates show that the design logic of GEGVL is promising virtual PBE organizer for interesting students in and helping them learn about Earth sciences.

Considering the significance of thermodynamic cycles in the global energy system, it is necessary to develop new general classes of thermodynamic cycles to relieve current energy and environmental problems. Inspired by the relationship between power cycles and refrigeration cycles, we realize that general classes of thermodynamic cycles should occur in pairs with opposite functions. Here we reverse class 1 heating cycles to obtain another new general class of thermodynamic cycles named class 2 heating cycles (HC-2s). HC-2s have two basic forms, and each contains six thermodynamic processes. HC-2s present the simplest and most general approach to utilizing the temperature difference between a medium-temperature heat source and a low-temperature heat sink to achieve efficient high-temperature heating. HC-2s fill the gaps that have existed since the origin of thermal science, and they will play significant roles in the global sustainable energy system.

The popularity of electronic cigarettes in the United States and around the world has led to a startling rise in youth nicotine use. The Juul e-cigarette was introduced in the U.S. market in 2015 and had captured approximately 13% of the U.S. market by 2017. Unlike many other contemporary electronic cigarette companies, the founders behind the Juul® e-cigarette approached their product launch like a traditional high-tech start-up company, not like a tobacco company. This article presents a case study of Juul’s corporate and product development history in the context of US regulatory actions. The objective of this article is to demonstrate the value of government-curated archives as leading indicators which can (a) provide insight into emergent technologies and (b) inform emergent regulatory science research questions. A variety of sources were used to gather data about the Juul e-cigarette and the corporations that surround it. Sources included government agencies, published academic literature, non-profit organizations, corporate and retail websites, and the popular press. Data was disambiguated, authenticated, and categorized prior to being placed on a timeline of events. A timeline of four significant milestones, nineteen corporate filings and events, twelve US regulatory actions, sixty four patent applications, eighty seven trademark applications, twenty three design patents and thirty two utility patents related to Juul Labs and its associates is presented spanning the years 2004 thought 2020. This work demonstrates the probative value of findings from patent, trademark, and SEC filing literature in establishing a premise for emergent regulatory science research questions which may not yet be supported by traditional archival research literature. The methods presented here can be used to identify key aspects of emerging technologies before products actually enter the market, this shifting policy formulation and problem identification from a paradigm of being reactive in favor of becoming proactive. Such a proactive approach may permit anticipatory regulatory science research and ultimately shorten the elapsed time between market technology innovation and regulatory response.

Animals, with their complex and obligate multicellularity, evolved from microbial eukaryotes that were likely obligately or facultatively unicellular. The nature of the unicellular progenitors of animals has intrigued biologists since the late 19^th century, coinciding with the parallel spread of the cell theory and the theory of evolution. However, views on the ancestry of animals have been extremely varied. The huge diversity of single-celled organisms, the tremendous plasticity of animal cellular phenotypes, and the difficulties of organizing both into clear phylogenies in the pre-molecular era allowed a wide range of hypotheses to flourish, with nearly every major single-celled lineage, at one time or another, having been proposed as the precursor of animals. Most of these hypotheses never gained followers beyond their originator (such as the ideas that animals evolved directly from either bacteria, Volvox or fungi) and will not be discussed here. Three concepts, however, have been enduring and influential: (1) the amoeboid theory; (2) the flagellate theory; and the (3) the ciliate theory – to which a fourth category can now be added: (4) a mixed model, in which the ancestor was phenotypically plastic. We will discuss their origin, history, and current relevance.

This data descriptor summarizes the process applied and data gathered from 50 publications/papers reporting on the use of photography generated by tourists, tour operators and members of the public, with a particular focus on the crowdsourcing of photographs through online platforms and social networking sites (SNSs) as a method of research for wildlife conservation and ecotourism. The papers were collected in a systematic literature review to inform a pilot study of the feasibility of using SNSs to crowdsource georeferenced photographs of endangered Bornean Pygmy Elephants (Elephas maximus borneensis) taken by ecotourists along the Lower Kinabatangan River region of Sabah, Malaysia. Papers were sourced using the Murdoch University Findit online-search tool to search over 100 databases, including Proquest, Scopus and Web of Science. The criteria for a paper to be included in the review (and shared via the dataset attached to this this data descriptor) were that it was peer-reviewed, published in English, between 1997 and the 31 December 2017, had the full text accessible online and reported on a study or studies that utilized photographs that tourists, tour operators and/or members of the public generated and shared via SNSs or online platforms.

Evaporation is one of the main processes in the hydrological cycle, and it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, the evaporation is a complex and nonlinear phenomenon; therefore, the data-based methods can be used to have precise estimations of it. In this regard, in the present study, Gaussian Process Regression (GPR), Nearest-Neighbor (IBK), Random Forest (RF) and Support Vector Regression (SVR) were used to estimate the pan evaporation (PE) in the meteorological stations of Golestan Province, Iran. For this purpose, meteorological data including PE, temperature (T), relative humidity (RH), wind speed (W) and sunny hours (S) collected from the Gonbad-e Kavus, Gorgan and Bandar Torkman stations from 2011 through 2017. The accuracy of the studied methods was determined using the statistical indices of Root Mean Squared Error (RMSE), correlation coefficient (R) and Mean Absolute Error (MAE). Furthermore, the Taylor charts utilized for evaluating the accuracy of the mentioned models. The outcome indicates that the optimum state of Gonbad-e Kavus, Gorgan and Bandar Torkman stations, Gaussian Process Regression (GPR) with the error values of 1.521, 1.244, and 1.254, the Nearest-Neighbor (IBK) with error values of 1.991, 1.775, and 1.577, Random Forest (RF) with error values of 1.614, 1.337, and 1.316, and Support Vector Regression (SVR) with error values of 1.55, 1.262, and 1.275, respectively, have more appropriate performances in estimating PE. It found that GPR for Gonbad-e Kavus Station with input parameters of T, W and S and GPR for Gorgan and Bandar Torkmen stations with input parameters of T, RH, W, and S had the most accurate performances and proposed for precise estimation of PE. Due to the high rate of evaporation in Iran and the lack of measurement instruments, the findings of the current study indicated that the PE values might be estimated with few easily measured meteorological parameters accurately.

Soil secondary salinization has seriously affected the greenhouse vegetable production in China. To improve the secondary salinization greenhouse soil and enhance the soil physical-chemical properties in an eco-environmental way, different organic amendments (straw, straw biochar, Trichoderma bio-organic manure, commercial organic manure) were applied using pot experiment for 60 day to comprehensively screen the optimal remediation method. In this study, soil nutrient condition and salt movement were assessed, and predictive models using multi-linear regression (MLR) and Random Forest (RF) were developed to estimate soil salinization parameters. The findings indicated a significant decrease in soil salt content following the application of organic materials compared to the control treatment. Specifically, the addition of straw at a rate of 250g/kg resulted in a 59.38% reduction in soil salt levels after 60 days (P < 0.05). Furthermore, the main salt ions exhibited dynamic changes over the course of the experiment, with reductions observed in Na+, Ca2+, Cl-, and NO3- content under the 250 g/kg straw treatment by 83.63%, 74.67%, 63.26%, 59.07%, respectively, compared to CK (P < 0.05). In addition, the SO42- content under 125 g/kg commercial organic manure amendment reduced by 48.94%, respectively (P < 0.05). Contrary to expectations, the addition of organic materials significantly increased the levels of total nutrients (N/P/K) and available potassium (AK) and phosphorus (AP) in the soil. Specifically, the addition of straw at a rate of 250 g/kg resulted in increases of 18.02%-87.38% in total potassium (TK), 66.67%-200% in total phosphorus (TP), and 142.87%-367.8% in AK after a period of sixty days (P < 0.05). Ultimately, the treatment involving the addition of 250 g/kg of straw demonstrated the most pronounced impact on the physical and chemical properties of the soil. The random forest method shows promise in accurately predicting soil salt and soil sodium adsorption ratio (SAR)indicators, thereby providing a valuable tool for estimating soil properties.

Tribology is related to all studies on friction, wear and lubrication. One of the main aims of these studies is a reduction in friction and wear. Tribology is extremely vast, being also multidisciplinary and interdisciplinary. Therefore, it is very difficult to organize the several tribology subjects in an unique way and different classifications have been proposed by different authors. In this work, the several subjects treated by tribology are reviewed and organized in six branches: Fundamental Tribology, Tribology of Materials and Lubricants, Micro and Nanotribology, Industrial Tribology, Biotribology and New Frontiers of Tribology. The main subjects treated by the six branches are briefly reviewed in the paper in order to highlight the vastness of tribology and its important contribution to sustainability. Particularly friction and wear reductions are strictly related to greater efficiency and material saving, which mean less energy losses and material wastes, less pollution and therefore a more sustainable life according to the Sustainable Development Goals. The connections among the latter and the several different tribological subjects are discussed.

This work studies the discontinuities features of sedimentary flysch materials in a 100 km2 area belonging to the Basque Arc. Such materials are common in this Spanish Alpine region located in the north of the Iberian Peninsula. A total of 33 outcrops are investigated by an intensive geotechnical investigation including geomechanical stations, boreholes and mechanical laboratory tests. Two flysch units are characterized: the Upper Aguinaga Formation or siliciclastic flysch, and the Lower Itziar Formation or calcareous flysch. Differences between both flysch formation are found. Joints in the siliciclastic flysch formation present an undulated roughness, with a spacing narrower and a persistence lower than in the calcareous flysch formation, which exhibits higher friction angles, although roughness is essentially planar. In addition, the potential of using Artificial Intelligence (AI) techniques, particularly Artificial Neural Networks and Support Vector Machine, to estimate the Geological Strength Index (GSI) from the Rock Quality Design (RQD) and some discontinuities features (spacing, persistence, aperture and roughness) is investigated. AI techniques are found to be satisfactory, being the Support Vector Machine with a linear kernel the technique which achieves the best performance.

Hybrid materials derived adsorbents have showed a great applicable efficiency in various fields including industrial uses and environmental remediation. Herein, the zinc oxide nanoparticles anchored carbon (ZnO-C) is fabricated and utilized for wastewater treatment by adsorption of Zn(II), Cd(II), Co(II) and Mn(II). The surface and structural characteristics are examined by TEM, SEM, XRD, FTIR, EDS and BET surface area. The Kinetics and equilibrium investigations are applied to optimize the adsorptive removal of Zn(II), Cd(II), Co(II) and Mn(II) onto ZnO-C. Results indicated formation of ZnO-C in crystalline spherical granules with nano-size between 29.3 and 48.8 nm. In addition, the spherical granules are gathered to form clusters. The FTIR indicated that the ZnO-C surface is rich with OH groups and ZnO. The adsorption capacity is reported as 212, 209, 200 and 230 mg/L for Zn(II), Cd(II), Co(II) and Mn(II) respectively. The optimum condition for maximum adsorption were pH between 5 and 6, contact time of 180 min and adsorbent dose of 0.1 g/L. The adsorptive removal data modeling for uptake of Zn(II), Cd(II), Co(II) and Mn(II) onto ZnO-C showed agreement with the assumption of pseudo 2nd order kinetic model and Freundlich isotherm suggesting fast adsorption rate and multilayer mechanism. The achieved adsorption capacity using the prepared ZnO-C is more effective compared to ZnO, carbon, Fe3O4 and Fe3O4-C. Real wastewater samples are applied including valley water, industrial wastewater and rain wastewater and evaluated for applicable uptake of Zn(II), Cd(II), Co(II) and Mn(II) using ZnO-C and Fe3O4-C with high efficiency.

The radiation stability of polymer test objects fabricated by direct laser writing is studied. The two groups of 6 cubes (50×50×50 μm3) were printed on a common silicon substrate. 6 cubes were irradiated with X-rays in the synchrotron radiation beam (12 keV, 1010 photons/mm2/s), the other 6 kept non-irradiated for the reference. In each group, the fabrication parameters (laser power and slicing step) were uniformly varied from cube to cube. Each irradiated cube was exposed with the dose of 1013 X-ray photons. The calibration of this dose in the radiological units (Gy) was carried out using the tissue-equivalent thermoluminescent detectors (TLD-800). The corresponding exposition dose was estimated as 30 kGy for each cube. The radiation effects were evaluated by Raman spectroscopy and by morphological changes observed with the raster electron microscope. The primary radiation effect appears in the essential increase of the polymerization degree with consuming carbon-carbon double bonds in favor of the polymer cross-linking. Only one cube of 6 has changed the size and shape due to this effect, while the others retained the initial shape. Morphological changes are connected with the improper fabrication parameters (laser power and slicing step). Properly fabricated objects withstand the X-rays of the synchrotron radiation beam.

This research work was aimed at investigating and determining the depth resolution of a 500Mhz GPR Antenna. The survey was conducted in an open space at the Physics Department, College of science-KNUST. The MALA GPR equipment with 500MHz shielded Antenna in the common offset-mode was used to investigate the depth at which materials were buried. Concrete block, tree roots, plastic bottle with water, glass bottle and Electric wire were each buried in cavities with five different burial depths. The real depth of each material was measured both along and across the cavity and compared to their corresponding GPR measured depth. The comparison of the Real depth and the GPR depth showed almost identical depth measurements with a root mean square deviation of 0.028m. The implication of this is that the 500 Mhz GPR antenna can accurately locate and detect the position of buried materials in the subsurface at a depth within the range (0.20-0.66) m.

In the past decade, under the background of the carbon peaking and carbon neutrality era, the rapid development of new energy vehicles has put forward higher requirements for the performance of strike forces such as battery cycle life, energy density and cost. Lithium-ion batteries have gradually become the mainstream of electric vehicle power batteries due to their excellent energy density, rate performance and cycle life. At present, the most widely used cathode materials for power batteries are lithium iron phosphate (LFP) and ternary nickel-cobalt-manganese (NCM). However, these materials exhibit the bottlenecks that limit the improvement and promotion of power battery performance. In this review, the performance characteristics, cycle life attenuation mechanism (including structural damage, gas generation and active lithium loss, etc.) and improvement methods (including surface coating and element-doping modification) of LFP and NCM batteries are reviewed. Finally, the development prospects of this field are proposed.

Optimum design and accurate control of the internal structure of the laser target materials remain an important goal for various laser physics experiments, especially for generating high flux photon and neutron beams. The low-density material is considered to be one of the most difficult for X-ray study due to its high transparency and imperceptible contrast. To produce clear visualization of foam containing sparse structures we used a high-quality monochromatic X-ray beam of synchrotron radiation source PETRA-III at DESY. The X-ray beam parameters allow tomographic scanning with application of phase contrast retrieval algorithms. A series of 3D images of foam-suspended glass microsphere inside the plastic cylinder were obtained with the quality high enough to observe the internal structure and to visualize uniformity, displacement and surface roughness on both sides of the microsphere. The main object under investigation was a CH-plastic capillary including 10 mg/cc CHO-foam with the centered glass microsphere. The results of this work demonstrate that tomographic visualization based on a high quality X-ray radiation and phase contrast analysis is an effective and useful technique for development of new laser targets containing structured low density materials.

Knowledge of the temperature evolution is crucial to understand and control laser beam welding of low-melting materials. Existing temperature determination approaches are restricted to i) one-dimensional temperature information (e.g. ratio-pyrometers), ii) a priori knowledge of the emissivity (e.g. thermography) and iii) high temperature regions (e.g. two-wavelength imaging). In this paper, a ratio-based two-color-thermography approach is developed that allows for two-dimensional temperature determination in low-melting temperature ranges (< 1200 K). For static measurement situations it is demonstrated, that temperature can be determined despite variation in signal intensity and emissivity with high accuracy. The two-color-thermography set-up is further transferred into a commercial laser beam welding machine and experiments are conducted for varying process parameters. The direct application of the developed two-color-thermography system in dynamic process situations is limited as image artifacts presumably caused by internal reflections inside the optical beam path are present.

Spiral steroids (SS) are a newly discovered type of steroid. Originally, they were described as cardiotonic glycosides because they cross-reacted with digoxin-specific antibodies (Digoxin-Like-Materials-DLM). SS differ from the classical steroids in several ways: [a] they are steroid phosphodiester conjugates and displace digoxin from digoxin-specific antibodies, [b] in contrast to all other steroids, cholesterol is not a precursor, [c] SS have more than 21 carbon atoms; the extra atoms form a 5th ring which includes a lactone, [d] SS bind to NaK-ATPase in membranes rather than receptors in the nucleus. SS have been identified by HPLC- mass spectroscopy in extracts from mammals, birds, and oysters but were not detected in plant extracts. Overall, SS seem to be key components in regulating potassium electrolytes during pregnancy and its related diseases – specifically pre-eclampsia and necrotizing enterocolitis.

This work investigates how integrated polyimide inlays with applied sensor bodies influence the guided ultrasonic wave propagation in narrow glass fiber-reinforced polymer specimens. Preliminary numerical simulations indicate that in a damping-free specimen, the inlays show reflections for the S0-mode propagation. Hence, an air-coupled ultrasonic technique and a 3D laser Doppler vibrometer measurement are used to measure different parts of the propagating waves’ displacement field after burst excitation at different frequencies. No significant reflections on the inlay can be seen in the experiments. However, it is shown that the reflections from the strip specimen’s narrow width cause periodical reflections that superimpose with the excited wave fronts. A continuous wavelet transformation in the time-frequency domain filters discontinuities from the measurement signal and is used for reconstruction of the time signals. The reconstructed signals are used in a spatial continuous wavelet transformation to identify the occurring wavelengths and hence to prove the assumption of reflections from the narrow edges. Since the amplitude of the reflections identified in the numerical data at the polyimide inlays are an order of magnitude smaller than the excited wave packages, it is concluded that material damping of the epoxy resin matrix extincts possible reflections from the inlays.

As a consequence of intense industrialization in the last few decades, the amount of agro-industrial wastes has increasing, where new forms of valorization are crucial. In this work, 5 residual biomasses from Maranhão (Brazil) were investigted as supports for immobilization of lipase from Thermomyces lanuginosus (TLL). The new biocatalysts BM-TLL (babaçu mesocarp) and RH-TLL (rice husk) showed immobilization efficiencies &gt;98% and hydrolytic activities of 5,331 U.g-1 and 4.608 U. g-1 respectively against 142 U. g-1 by Lipozyme® TL IM. High esterification activities were also found, with 141.4 U.g-1 and 396.4 U.g-1 from BM-TLL and RH-TLL against 113.5 U.g-1 by TL IM. Results of porosimetry, SEM and BET demonstrated BM and RH supports are mesoporous materials with large hydrophobic area, allowing a mixture of hydrophobic adsorption and confinement, resulting in hyperactivation of TLL. These biocatalysts were applied in the production of hexyl laurate, where RH-TLL was able to generate 94% conversion in 4 h. Desorption with Triton X-100 and NaCl confirmed that new biocatalysts were more efficient with 5 times less protein than commercial TL IM. All results demonstrated that residual biomass was able to produce robust and stable biocatalysts containing immobilized TLL with better results than commercial preparations.

In order to reach the theoretical efficiency limits of lead-based metal halide perovskite solar cells, the voltage should be enhanced because it suffers from nonradiative recombination. Perovskite materials contain intrinsic defects that can act as Shockley-Read-Hall recombination centers. Several experimental and computational studies have characterized such defect states within the band gap. We give a systematic overview of compositional engineering by distinguishing the different defect reducing mechanisms. Doping effects are divided into influences on: (1) Crystallization; (2) Lattice properties. Incorporation of dopant influences the lattice properties by: (a) Lattice strain relaxation; (b) Chemical bonding enhancement; (c) Band gap tuning. The intrinsic lattice strain in undoped perovskite was shown to induce vacancy formation. The incorporation of smaller ions, such as Cl, F and Cd, increases the energy for vacancy formation. Zn doping is reported to induce strain relaxation but also to enhance the chemical bonding. The combination of computational studies using (DFT) calculations quantifying and qualifying the defect reducing propensities of different dopants with experimental studies is essential for deeper understanding and unraveling insights, such as the dynamics of iodine vacancies and the photochemistry of the iodine interstitials, and can eventually lead to a more rational approach in the search for optimal photovoltaic materials.

The hybrid personal cooling system (HPCS) consisted of ventilation fans and phase change materials (PCMs) covered with insulation pads is a promising wearable cooling system to mitigate heat strain and heat-related illnesses of occupational workers with heavy labor in hot environments. Effects of clothing characteristics (e.g., thermal resistance of insulation pads, latent heat and melting temperature of PCMs) on the thermal performance of the HPCS have been investigated in detail in our previous study. Apart from the aforementioned factors, environmental conditions, i.e., environmental temperature and relative humidity, also significantly affect the thermal performance of the HPCS. In this paper, a numerical parametric study was performed to investigate the effects of the environmental temperature and relative humidity (RH) on the thermal management of the HPCS. Five levels of air temperature under environmental RH=50% were chosen (i.e., 32, 34, 36, 38 and 40 ºC) to study the impact of environmental temperature on the HPCS’s cooling performance. In addition, four levels of environmental RH at ambient temperatures of 36 and 40 ºC were selected (i.e., 30, 50, 70 and 90%) to examine the effect of RH on cooling performance of the HPCS. Results show that high environmental temperatures could accelerate the PCM melting process and thereby weaken the cooling performance of HPCS. In the moderately hot environment (36 °C), the HPCS presented good cooling performance with the maximum core temperature at around 37.5 °C during excise when the ambient RH≤70%, whereas good cooling performance could be only seen under RH≤50% in the extremely hot environment (40 °C). Thus, it may be concluded that the maximum environmental RH for the HPCS exhibiting good cooling performance decreases with the increase in the environmental temperature.

Distribution System Operators (DSOs) are adapting to changing energy demands and the shift toward renewable and decentralized energy. Circularity is increasingly relevant for DSOs as their distribution systems age and need replacing. Taking circular action, however, is generally regarded as challenging as the current circular economy (CE) landscape is highly fragmented and rarely touches the implementation level. A longitudinal case study at Dutch DSO Liander on the circu-larity of distribution transformers was used to understand empirical success factors for taking circular action and to generate prescriptive knowledge on the operationalization of circularity. Six design propositions for circular action were formulated that suggest to 1) initiate small-scale cir-cularity experiments, 2) involve technical and strategic experts, 3) synergize circularity with more urgent, primary goals 4) translate circular initiatives bottom-up and top-down, 5) collaborate with other DSOs, and 6) create multidisciplinary teams. At DSO Liander, selecting the right interventions depending on the changing context contributed to operationalizing circularity for distribution transformers and achieving circularity targets. The generalizable design propositions could assist other DSOs in optimizing their strategy toward circular action.

A proposed interpretation of the characteristics and causes of the variation in science dynamics for technological evolution is described. The theoretical approach focuses on variability in research topics that guide scientific and technological evolution. Statistical method verifies the proposed approach by applying entropy, measures of dispersion and variance decomposition. The statistical evidence, using data of four main research fields in quantum technologies, suggests the following empirical properties: a) the growth of heterogeneity in research topics is inversely proportional to the age of research fields: recent research fields have a higher variability between topics with uncertainty in evolutionary dynamics, whereas older research fields have a lower variability and more concentration in specific research topics with stable evolution towards clear directions; b) the nature of research fields has a systematic effects in variability guiding the evolution of technologies. The theoretical approach and findings clarify main characteristics and causes of the evolution of science and technologies considering the underlying homogeneity or heterogeneity in research topics, providing main implications to improve the scientific and technological forecasting that may support appropriate R&amp;D investments towards promising research fields and technologies

Since the outbreak of COVID-19, social media platforms, such as Twitter, have experienced a tremendous increase in conversations related to Long COVID. The term “Long COVID” describes the persistence of symptoms of COVID-19 for several weeks or even months following the initial infection. Recent works in this field have focused on sentiment analysis of Tweets related to COVID-19 to unveil the multifaceted spectrum of emotions, viewpoints, and perspectives held by the Twitter community. However, most of these works did not focus on Long COVID, and the few works that focused on Long COVID have limitations. Furthermore, no prior work in this field has investigated Tweets where individuals self-reported experiencing Long COVID on Twitter. The work presented in this paper aims to address these research challenges by presenting multiple novel findings from a comprehensive analysis of a dataset comprising 1,244,051 Tweets about Long COVID, posted on Twitter between May 25, 2020, and January 31, 2023. First, the analysis shows that the average number of Tweets per month where individuals self-reported Long COVID on Twitter, has been considerably high in 2022 as compared to the average number of Tweets per month in 2021. Second, findings of sentiment analysis using VADER show that the percentage of Tweets with positive, negative, and neutral sentiment were 43.12%, 42.65%, and 14.22%, respectively. Third, the analysis of sentiments associated with these Tweets also shows that the emotion of sadness was expressed in most of these Tweets. It was followed by the emotions of fear, neutral, surprise, anger, joy, and disgust, respectively.

Adequate public spaces and urban green areas are key criteria for urban development and infrastructure implementation of healthy cities. Latterly, there has been an increasing number of research methods using artificial intelligence (AI) to monitor, quantify, and control the state of these spaces with an aim towards pioneering research in Urban Studies. However, in informal areas, open-data access tends to lack adequate and updated information, making it difficult to use AI methods. Hence, we propose a methodology for restricted open data collection and preparation for future use in machine learning or spatial data science models for similar areas. To that extent, we examine two peripheral and low-income neighborhoods in Quito, Ecuador, La Bota and Toctiuco, to analyze their public spaces, urban green areas, points of interest, and road networks, and how they address healthy cities criteria. We develop an original methodological approach that combines an index of proximity, accessibility, quantity, and quality of these spaces with geospatial and network analysis techniques. Results indicate that the connectivity and structure of these spaces are centralized and nodal, representing exclusion and segregation. This work provides insights on potential healthy spaces, and information to urban planners and policymakers in decision-making for healthy urban infrastructure.

In this paper, a distinction is first made between environmental, sustainable and green chemistry; the last two are then examined in relation to the more general problem of the environmental education. A brief historical digression on the STS (Science, Technology and Society) movement tries to dissect the reasons why chemistry is seen by the general public as a problem, not as a decisive resource for the realization of the ecological transition. Although sustainable and green chemistry can be decisive in overcoming the insularity of chemical disciplines in the high school, it fails to effectively embed itself in educational practices. Specific operational goals, supporting a real scientifical and technological literacy in sustainable and green chemistry, can help chemical educators. They are provided at the end of an examination of the founding axes of sustainable and green chemistry, according to the criteria of scientific and technological literacy.

Artificial intelligence (AI) has the potential to revolutionize research by automating data analysis, generating new insights, and supporting the discovery of new knowledge. The top 10 contribution areas of AI towards public health were gathered in this feasibility study. We utilized the “text-davinci-003” model of GPT-3, using OpenAI playground default parameters. The model was trained with the largest training dataset any AI had, limited to a cut-off date in 2021. This study aimed to test the ability of GPT-3 to advance public health and to explore the feasibility of using AI as scientific co-author. The AI was asked for input including scientific quotations and the human authors reviewed responses for plausibility. We found that GPT-3 was able to assemble, summarize, and generate plausible text blocks relevant for public health concerns, elucidating valuable areas of application for itself. However, most quotations were invented by GPT-3 and thus, invalid. Ac-cording to today’s rules, we conclude that AI can contribute to public health research as a team member. Nevertheless, good scientific practice needs to be also followed for AI contributions, and a broad scientific discourse on AI contributions is needed. Policies for good scientific practice should be updated timely following this discourse.

This paper presents the results of a study aimed at understanding how technology maturity level influences the incidence of university technology transfer to the private sector. The study examined the topic from the perspective of private sector organizations. It used data from a random sample of patent applications filed with the United States Patent and Trademark Office and a theoretically guided sampling of multiple cases of private sector organizations that contemplated obtaining and assimilating technologies created at universities in the United States. The patent application data were analyzed using nonparametric statistical techniques and the case data were analyzed using qualitative comparative analysis (QCA). The findings of the study suggest that the typical maturity level of technologies created at U.S. universities is a TRL-5 or lower on as scale adapted from the NASA technology readiness level (TRL) scale. A technology maturity level of TRL-6 or higher is likely an insufficient but necessary part of at least one unnecessary but sufficient configuration of conditions that tends to result in the occurrence of university technology transfer. However, under certain circumstances, a technology maturity level of at least TRL-6 could be a sufficient but unnecessary condition for the occurrence of university technology transfer. These findings have several important implications. First, they provide support for the notion that university technology transfer is subject to causal complexity. Moreover, it may be possible to increase the incidence of university technology transfer in the United States by implementing public policy and practices that explicitly take technology maturity level into consideration.

Integrated landscape approaches (ILA) aim to reconcile multiple, often competing, interests across agriculture, nature conservation, and other land uses. Recognized ILA design principles provide guidance for their implementation, yet application remains challenging, and a strong performance evidence-base is yet to be formed. A comprehensive literature review and focus group discussions with practitioners identified considerable diversity of ILA in actors, temporal, and spatial scales, inter alia. This diversity hampers learning from and steering these integrated planning approaches because of its intractable nature. Therefore, we developed a tool—an ‘ILA mixing board’—to structure the complexity of ILA into selectable and scalable attributes in a replicable way to allow planning, diagnostics, and comparative assessment of ILA. The ILA mixing board tool presents seven qualifiers, each representing a key attribute of ILA design and performance such as project flexibility, inclusiveness of the dialogue, and the centrality of the power distribution. Each qualifier has five (non-normative) outcome indicators that can be registered as present or absent. This process in turn guides planners, evaluators and other participating stakeholders involved in landscape management to diagnose the ILA type, and or its performance. We apply the ILA mixing board as a diagnostic tool to three ILA cases in Nicaragua, Madagascar, and the Congo Basin to show some of the many possible configurations of qualifiers on the mixing board. Overall, the tool allows comparative analyses of the complexity of ILA in a structured and manageable way.

During planetary exploration mission operations, one of the key responsibilities of the instrument teams to determine data viability for subsequent analysis. During the 2019 CanMoon Lunar Sample Return Analogue Mission, the Lead Raman Specialist manually examined each spectra to provide quality assurance/validation. This non-trivial process requires years of experience to complete accurately. With the proven efficacy of Convolutional Neural Networks (CNNs) in classification tasks, and the increased use of automation and control loops on planetary space platforms for navigation and science targeting, an opportunity presents itself to approach this validation problem utilising CNNs. We present the Generalised Raman Validation Network (GRaVN), an neural network focused specifically on extracting the generalised structure of Raman spectra for quality assurance/validation. This work demonstrates the viability of utilising a CNN network in validation activities for Raman spectroscopy. Utilising only two hidden layers, a configuration was developed that provided good levels of accuracy on a manually curated dataset. This indicates that such a system could be useful as part of an autonomous control loop during planetary exploration activities.

The first two decades of the 21st-century have seen the emergence of the modern citizen science movement, increased demand for niche eco and wildlife tourism experiences, and the willingness of people to voluntarily share information and photographs online. To varying extents, the rapid growth of these three phenomena has been driven by the availability of portable smart devices, access to the Web 2.0 internet from almost anywhere on the planet, and the development of applications and services, including social media/networking sites (SNSs). In addition, the number of peer-reviewed publications that explore how text and images shared on SNSs can be data-mined for academic research has surged in recent years. This systematic quantitative review has two goals. The first goal is to provide an oversight of how the photographs that ecotourists share online are contributing to wildlife tourism research. The second goal is to promote the emerging photovoice technique as a theoretical context for social research based on the photographs and comments that ecotourists share on SNSs. From the perspectives of community benefits, conservation behaviours, and environmental education, there are many similarities between authentic ecotourism experiences and quality ecological citizen science programs. Much of the literature regarding the theory and practice of citizen science reports on the difficulties of attracting, training, motivating and retaining community members. The synthesis of this review is that crowdsourcing wildlife and tourism data from comments and photographs that ecotourists share on SNSs is a credible method of research that provides a self-replenishing pool of citizen scientists.

We describe how clinical researchers can exploit the Android cell phone as an economic platform for the gathering of data from clinical trial participants. The aim was to provide a solution with the shortest possible learning curve for researchers who are comfortable with setting up web pages. The additional requirement is that they extend their skills to the installation of a local webserver on the cell phone and then use four simple PHP templates to construct the clinical research data collection and processing forms. Data so collected is automatically written to local csv files on the cell phone. These csv phones can be retrieved from the device by the researcher simply by plugging the cell phone into their desktop PC and accessing the cell phone memory in just the same way as they would a USB memory stick. The results are presented as a list of recommended Android Apps along with settings that have proved to provide a stable combination likely to be easily used by clinical research participants. We have made a limited ‘user trial’ of this approach with satisfactory feedback received. We have concluded that this approach will reward researchers with a solution that is user friendly, will provide transcription free data and that is more than cost competitive with the conventional error prone/poor compliance ‘paper based participant form – researcher transcription’ cycle.

Objective: The effect of long-term performance of one-bottle or two-bottle bonding agents on the shear bond strength to lithium disilicate ceramics (LDS) were to investigate, and the long-term performance of the bond strength of two-bottle bonding agent (Tokuyama Universal Bond II) was investigated under conditions without hydrofluoric acid solution (abbreviated as HF)-pretreatment of LDS. Methods: Nine resin cements (both self-adhesive and adhesive types) were used. It was investigated 1) the adhesion strength of various resin cements to LDS from the presence or absence of HF-treatment, 2) to determine the effect of the deterioration in three times [after one-day storage (abbreviated as Base), and after 5,000 &amp; 20,000 thermocycles (abbreviated as TC 5k and TC 20k)] of one- and two-component bonding agents. And the difference in degradation between one- and two-component bonding gents consist of the silane coupling agent was performed by chemical analysis (High Performance Liquid Chromatography). Results: The trends of resin cements were statistically not very different for each cement 3 times with HF-conditions. Also ESTECEM II and Super-Bond Universal showed the significant greatest values in two conditions (TC 5k and TC 20k) without HF-condition. In TC 20k, ESTECEM II &amp; Super-Bond Universal showed significantly better results than others when treated with the recommended bonding agents without HF-condition. In TC 20k, there was not much statistically significant difference if pretreated with Tokuyama Universal Bond II without HF-condition. Significance: When using LDS, it was found that long-term durability could be maintained by pretreating with Tokuyama Universal Bond II without pretreating with various hazardous HFs.

This comprehensive review explores the multifaceted landscape of supercapacitors, highlighting their pivotal role in meeting the global demand for efficient energy storage solutions. Supercapacitors, with their high power density, rapid charge-discharge cycles, and extended cycle life, offer a compelling alternative to conventional batteries and capacitors. The review delves into the fundamental mechanisms of energy storage in supercapacitors, categorizing them into Electrochemical Double-Layer Capacitors (EDLCs), pseudocapacitors, and hybrid capacitors. It discusses significant advancements in supercapacitor technology, including nanostructured materials, flexible and wearable supercapacitors, solid-state supercapacitors, and hybrid supercapacitors, highlighting their potential applications across industries such as transportation, renewable energy, consumer electronics, and industrial power management. Through continued research and development, supercapacitors are poised to play a pivotal role in driving the transition towards a greener and more efficient future.

Polyetheretherketone (PEEK) in the last few years emerged as an exceedingly promising material for craniofacial defect, due to its biocompatibility and mechanical properties. However, its utilization remains controversial due to its inertness and low osteoinductivity. This study aimed to investigate the postoperative outcomes of patients undergoing maxillo-facial and neurosurgical procedures with PEEK implants. The focus is on evaluating bone regrowth on the surface and edges of the implant, periosteal reactions, and implant positioning. A retrospective analysis of 12 maxillo-facial surgery patients and 10 neurosurgery patients who received PEEK implants was conducted. CT scans performed at least one-year post-operation, were examined for bone regrowth, periosteal reactions, and implant positioning. In maxillo-facial cases, the analysis included mandibular angle and fronto-orbital reconstruction, while neurosurgical cases involved cranioplasty. In maxillofacial surgery, 11 out of 12 patients showed radiological evidence of bone regrowth around PEEK implants, with favorable outcomes observed in craniofacial reconstruction. In neurosurgery, 9 out of 10 patients exhibited minimal or none bone regrowth, while one case demonstrated notable bone regeneration beneath the PEEK implant interface. The study highlights the importance of implant design and patient-specific factors in achieving successful outcomes, providing valuable insights for future implant-based procedures.

Driven by environmental sustainability concerns, the integration of biobased components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project. The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as profiles, insulation, and the tightness system with bio-based and less environmental impact alternatives presenting the results achieved in the façade system design of the Basajaun project funded by European Union. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to current building envelope standards and normative; to implement diverse façade typologies for vision panels, opaque sections, and integrated windows; to engineer the prefabrication process for industrialization, enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.

In this paper, we present an experimental procedure to enhance the dimensional accuracy of fabrication via Stereolithography (SLA) of features at the micro-scale. Using a custom benchmark part, deviations in feature dimensions (micro-pores diameters and depths) were detected and measured by confocal microscopy. Samples characterization and experimental observations allowed the identification of inaccuracy sources, mainly due to the laser beam scanning strategy and to the incomplete removal of uncured liquid resin in post-processing (i.e., IPA washing). As a technology baseline, the measured dimensional errors on pores diameters were up to -46%. A compensation method of the nominal laser spot diameter (85m) was defined and implemented resulting in relevant improvements in dimensional accuracy of 9.8% and 11.3% on full-open pores diameter and depth, respectively. Further investigation was performed on a customized test part to adjust the calibration procedure. The measurements revealed that the estimate of the laser beam spot size is 968m. Measurements on micro-pores having different sizes revealed that a constant compensation parameter (i.e., C=85, 96, 120m) is not fully effective at the micro-scale, where average errors still remain at -24%, -18.8%, and -16% for compensations equals to 85, 96 and 120m, respectively. A further experimental campaign allowed the identification of an effective nonlinear compensation law where the compensation parameter depends on the micro-feature size C= f (D). Results show a sharp improvement in dimensional accuracy on micro-pore fabrication, with errors consistently below +8.2%. The proposed compensation method can be extended for the fabrication of any micro-features without restrictions on the specific technology implementation. Concerning the inaccuracy introduced by the laser path, experimentation with a customized part allowed the optimization of the part orientation to reduce the errors and their differences along the X and Y machine axes.

Keywords: Marine Coasts; Protected Areas; Defense and Conservation; Asbestos Cement Materials; Wastes; Contamination; Human Health Risk; Medical Geology.

Globally, weeds interfere with agricultural production activities and have a very serious impact on agriculture and animal husbandry. Identifying a safe and reliable weed control strategy might increase yield, production net income, and improve crop quality. A field experiment was carried out to explore the effects of weeds interference frequency on the yield and quality of Glycyrrhiza uralensis Fisch in an arid and semi-arid area of northwest China. The experiment consisted of seven treatments and were (1) no weeding, marked as WF0; (2)-(7) artificial weeding by hoe once every 1, 2, 4, 6, 8, 10 weeks after emergence, marked as WF1, WF2, WF4, WF6, WF8 and WF10, respectively. We found that the higher weeding frequency had a higher the plant height, photosynthesis, yield and quality. The highest yield was obtained in the WF1 treatment, while the cost of weeding was the highest among all treatments. The concentration of liquiritin and glycyrrhizic acid were increased by 53.24% and 36.57%, with the highest nitrogen metabolism enzymatic activities and quality in WF4 treatment. WF4 treatment exhibited the largest increases in the net income among all treatments in both growing seasons, with respective increases up to 71.39 % and 78.81%. These findings suggested that weeding once every 4 weeks would be an effective and sustainable measure to control weeds in an arid and semi-arid area.

We overview recent findings achieved in the field of model-driven development of additively manufactured porous materials for development of a new generation of bioactive implants for orthopedic applications. Porous structures produced of biocompatible titanium alloys by selective laser melting can present a promising material to design scaffolds with regulated mechanical properties and with capacity to be loaded with pharmaceutical products. Adjusting pore geometry, one could control elastic modulus and strength/fatigue properties of the engineered structures to be compatible with bone tissues, thus preventing the stress shield effect when replacing a diseased bone fragment. Adsorption of medicals by internal spaces would make it possible to emit the antibiotic and anti-tumor agents into surrounding tissues. We critically analyze the recent advances in the field featuring model design approaches, virtual testing of the designed structures, capabilities of additive printing of porous structures, biomedical issues of the engineered scaffolds and so on. A special attention is paid to highlight the current troubles in the field and the ways of their solutions.

Over the past few years, there has been an increasing fascination with electric unmanned aerial vehicles (UAVs) because of their capacity to undertake demanding and perilous missions, while also delivering advantages in terms of flexibility, safety, and expenses. These UAVs are revolutionizing various public services, encompassing real-time surveillance, search and rescue operations, wildlife assessments, delivery services, wireless connectivity, and precise farming. To enhance their efficiency and duration, UAVs typically employ a hybrid power system. This system integrates diverse energy sources, such as fuel cells, batteries, solar cells, and supercapacitors. The selection of an appropriate hybrid power arrangement and the implementation of an effective energy management system are crucial for the successful functioning of advanced UAVs. This article specifically concentrates on UAV platforms powered by batteries, incorporating innovative technologies like in-flight recharging via laser beams and tethering. It provides an all-encompassing and evaluative examination of the current cutting-edge power supply configurations, with the objective of identifying deficiencies, presenting perspectives, and offering recommendations for future consideration in this domain.

In this work, a systematic study was conducted on the fabrication of multi-material components obtained employing Laser-Powder Bed Fusion (L-PBF) technology. The idea of making multi-material components is a winning capability of additive technologies because it allows the fabrication of Functionally Graded Materials (FGMs) with the customization of parts according to different required properties. The transition from one material to another was achieved gradually and continuously within the same layer using ad-hoc equipment designed for L-PBF systems with a powder spreading technique based on coaters or rollers. The influence of the relative position of the different materials within the powder chamber and the geometry of the developed equipment on the metallurgical and mechanical properties of the manufactured samples was evaluated. The performed tests involved the use of two materials, a nickel-based superalloy, and a stainless steel, having different chemical, physical and mechanical properties to obtain gradual properties variation in the manufactured samples. Based on the results of post-process characterization obtained through metallographic, chemical, and mechanical analysis, the relative positions of the materials and the geometry of the developed equipment have a limited effect on the sample’s manufactured properties. The characteristics of the FGM zone depend on the nature of the employed powders, and its extent coincides with that defined during the design of the divider.

A pilot study on laser 3D printing of inorganic free-form micro-optics is experimentally validated. Ultrafast laser nanolithography is employed for structuring hybrid organic-inorganic material SZ2080TM followed by high-temperature calcination post-processing. The combination allows production of 3D architectures and the heat-treatment results in converting the material to inorganic substance. The produced miniature optical elements are characterized and their optical performance demonstrated. Finally, the concept is validated for manufacturing compound optical components such as stacked lenses. This is opening for new directions and applications of laser made microoptics under harsh conditions such as high intensity radiation, temperature, acidic environment, pressure variations, which include open space, astrophotonics, and remote sensing.

Solar reflective index (SRI) is one of the important parameters in the analysis of a building’s energetic and thermal performance, especially for “cool” reflective paints or coatings. However, there exists less information on the typical performance of the cool materials exposed for long term in the Middle East and more specifically in the United Arab Emirates (UAE). In this study, we determined values of reflectance, emittance, solar reflective index (SRI), and color difference, for three different high SRI white paints exposed naturally on low and high sloped racks for three years. After 3 years, reflectance values of exposed paint panels significantly decreased with an increased color difference in comparison with original unexposed paint surfaces. Emissivity of the paint changed very little for all of the exposed samples, but SRI, determined from both the reflectance and emittance, was reduced from between 95 and 110 to between 60 and 90 after three years. This appeared to be related to exposure to high temperatures, UV radiation, and adhesion of airborne contaminants in conjunction with low precipitation. Macroscopically, panels exposed on a low slope were the most discolored with the greatest presence of dust infusion and reduction in increase in surface temperatures which was demonstrated through thermal imaging. Such natural weathering research study is necessary for the development of standard exposure tests and determination of various control elements to increase the durability of cool materials in hot and arid climatic conditions of UAE.

Recently, several research groups have reported on anomalous enhancement of the self-field critical currents, Ic(sf,T), at low temperatures in superconductor/Dirac-cone material/superconductor (S/DCM/S) junctions. Some papers attributed the enhancement to the low-energy Andreev bound states arising from winding of the electronic wave function around DCM. In this paper, Ic(sf,T) in S/DCM/S junctions have been analyzed by two approaches: modified Ambegaokar-Baratoff and ballistic Titov-Beenakker models. It is shown that the ballistic model is an inadequate tool to analyze experimental data from S/DCM/S junctions. The primary mechanism for limiting superconducting current in S/DCM/S junctions is different from the conventional view that the latter is the maximum value within the order parameter phase variation. Thus, there is a need to develop a new model for self-field critical currents in S/DCM/S systems.

Recently, Kayyalha et al. (Phys. Rev. Lett., 2019, 122, 047003) reported on anomalous enhancement of the self-field critical currents, I_c (sf,T), at low temperatures in Nb/BiSbTeSe₂-nanoribbon/Nb Josephson junctions. The enhancement was attributed to the low-energy Andreev bound states arising from winding of the electronic wave function around the circumference of the topological insulator BiSbTeSe₂ nanoribbon. In this paper, we show that identical enhancement in I_c(sf,T) and in the upper critical field, B_c2(T), at approximately same reduced temperatures, were reported by several research groups in atomically thin junctions based on a variety of Dirac-cone materials (DCM) earlier. Our analysis shows that in all these S/DCM/S systems the enhancement is due to a new superconducting band opening. Taking in account that several intrinsic superconductors also exhibit the effect of new superconducting band(s) opening when sample thickness becomes thinner than the out-of-plane coherence length, we strength our previous proposal that there is a new phenomenon of additional superconducting band(s) opening in atomically thin films.

In this short review paper we have assembled the main characteristics of partial oxidation reactions (oxidative dehydrogenation and selective oxidation to olefins or oxygenates, as aldehydes and carboxylic acids and nitriles), as well as total oxidation, particularly for depollution, environmental issues and wastewater treatments. Both gas-solid and liquid-solid media have been considered with recent and representative examples within these fields. We have also discussed about their potential and prospective industrial applications. Particular attention has been brought to new raw materials stemming from biomass and to liquid-solid catalysts cases. This review paper also summarizes the progresses made in the use of unconventional activation methods for performing oxidation reactions, highlighting the synergy of these technologies with heterogeneous catalysis. Focus has been centered on usual catalysts activation methods but also on less usual ones, such as the use of ultrasounds, microwaves, grinding (mechanochemistry) and photo-activated processes, as well as their combined use.

A multiscale (micro-macro) approach is proposed for the establishment of the full thermal and induced stress fields in cracked composites that are subjected to heat flow. Both the temperature and stresses distributions are determined by the solution of a boundary value problem with one-way coupling. In the micro level and for combined thermomechanical loading, a micromechanical analysis is employed to determine the effective moduli, coefficients of thermal expansion and thermal conductivities of the undamaged composite. In the macro level, the representative cell method is employed according to which the periodic damaged composite region is reduced, in conjunction with the discrete Fourier transform, to a finite domain problem. As a result, a boundary value problem is obtained in the Fourier transform domain which is appropriately discretized and solved. The inverse transform and an iterative procedure provide the full thermal and stress fields. The proposed method is verified by comparisons with exact solutions. Applications are given for the determination of the thermal and stress fields in cracked fiber-reinforced polymeric composite, cracked porous ceramic material and cracked periodically layered ceramic composite caused by the application of heat flow. The presented formulation admits however the application of a combined mechanical and heat flux on cracked composites.

This brief communication intends to develop critical thinking on the development at different levels that could be evaluated in the well-being of humans from the local development towards a global scale or planetary point of view. Therefore it was presented and discussed how Artificial Intelligence tools could provide important contributions and influence in the design of critical thinking to develop ideas and insights within Research as well as funding for technology transfer. In this context it should be highlighted that the generation of funding and economy for sustainability that it should be based on critical thinking and analysis of what is need it from the close surrounding towards longer distances as well as in the inversed direction. In this regard, the main axes that support it are based on the importance of entailment of individuals in their close surrounding as well as to longer physical distances and cultural differences. An in this context it should be highlighted the existence of large diversity and varied Multicultural differences. These factors could affect the developments of technology, education; level, and quality of life. Thus the Economical and development indexes could be largely varied and different between them. For this reason it should highlighted the local development within shortened times by interacting to receive or provide materials with aggregated value or non-tangible values. Therefore, it could be accelerated the process of improvement in a targeted field looking for average homogeneous development everywhere. And there, it is where the link-up and transfer strategies of technology and education by creation of varied strategies in communication media. As for example the communication plays an important role to transfer knowledge within the different social status and imagining the development of thinking that later it will be the basis for the next generation of technology. By this manner, it could be coupled different levels of educations degrees by a factor in common related with curiosity and open minds to learn, work, and live together in the context of developments of new smart manners of living where economy and new encrypted currency are involucred and provide by different manners sustainability. In these perspectives the development and education at the University and higher degrees taking into account the transmission of important factors such as; i) entailment , ii) development of knowledge, and iii) transference, is fundamental. Finally, it should be highlighted the particular need of good human relationships, emotional intelligence, and diplomacy to afford from the simplest challenges to the higher ones.

This paper presents the findings of an exploratory study on the continuously generating Big Data on Twitter related to the sharing of information, news, views, opinions, ideas, knowledge, feedback, and experiences about the COVID-19 pandemic, with a specific focus on the Omicron variant, which is the globally dominant variant of SARS-CoV-2 at this time. A total of 12028 tweets about the Omicron variant were studied, and the specific characteristics of tweets that were analyzed include - sentiment, language, source, type, and embedded URLs. The findings of this study are manifold. First, from sentiment analysis, it was observed that 50.5% of tweets had the ‘neutral’ emotion. The other emotions - ‘bad’, ‘good’, ‘terrible’, and ‘great’ were found in 15.6%, 14.0%, 12.5%, and 7.5% of the tweets, respectively. Second, the findings of language interpretation showed that 65.9% of the tweets were posted in English. It was followed by Spanish or Castillian, French, Italian, Japanese, and other languages, which were found in 10.5%, 5.1%, 3.3%, 2.5%, and <2% of the tweets, respectively. Third, the findings from source tracking showed that “Twitter for Android” was associated with 35.2% of tweets. It was followed by “Twitter Web App”, “Twitter for iPhone”, “Twitter for iPad”, “TweetDeck”, and all other sources that accounted for 29.2%, 25.8%, 3.8%, 1.6%, and <1% of the tweets, respectively. Fourth, studying the type of tweets revealed that retweets accounted for 60.8% of the tweets, it was followed by original tweets and replies that accounted for 19.8% and 19.4% of the tweets, respectively. Fifth, in terms of embedded URL analysis, the most common domains embedded in the tweets were found to be twitter.com, which was followed by biorxiv.org, nature.com, wapo.st, nzherald.co.nz, recvprofits.com, science.org, and other URLs. Finally, to support similar research and development in this field centered around the analysis of tweets, we have developed an open-access Twitter dataset that comprises tweets about the SARS-CoV-2 omicron variant since the first detected case of this variant on November 24, 2021.

Modern medicine adopted four presumptions when it evolved from ancient experienced-based mind-body medicine. To understand its failure in finding cures for chronic diseases, we examined four presumptions, and found that statistical population of health properties does not exist for most research purposes, mathematical models are misused to model intensive properties, synthetic drugs are inherently more dangerous than nature-made medicines under their respective application conditions, and reductionist treatments are inferior and inherently dangerous. We found that clinical trials are valid only for research where treatment effect is much stronger than the total effects of all interfering or co-causal factors or errors introduced by misused mathematical models can be tolerated. In all other situations, clinical trials introduce excessive errors and fail to detect treatment effects, or produce biased, incorrect or wrong results. We further found that chronic diseases are manifestation of small departures in multiple process attributes in distinctive personal biological pathways networks, that modern medicine lacks required accuracy for accurately characterizing chronic diseases, and that reductionist treatments are good at controlling symptoms and safe for short term uses. For all stated reasons, as long as modern medicine continues relying on the flawed presumptions, it can never find predictable cures for chronic diseases. By implication, predictable cures to chronic diseases are adjustments to lifestyle, dietary, emotional, and environmental factors to slowly correct departures in process attributes responsible for chronic diseases.

The diversity and inclusion discussion permeates many sectors of society. Within this dialogue, science and scientists are acutely aware of the value of diversity and the need for inclusion. While demographic diversity in science has received considerable recent attention, very little research and understanding exists on inclusion. Our study presents empirical data on the meaning of inclusion using a crowdsourcing approach that sought responses to the question “What does inclusion mean to you?”. The most prominent concepts were those of empathy, warmth, support, love, acceptance and curiosity; diverse perspectives; and participation. We clustered conceptual elements of inclusion into four themes: access and participation, embracing diverse perspectives, a welcome environment, and team belonging. On the basis of these data, we theorize a conceptual framework model from which inclusion may be put into practice. Our model suggests a dynamic process of inclusion operating from principal structural elements of 1) a foundation that involves place, access and participation, and space; 2) reciprocal engagement as an engine for inclusion; and 3) expression of inclusion as culture. The framework model demonstrates a means by which the practice of diversity can be more than shifts in demographic statistics, and instead promote the full expression of benefits derived when the many dimensions of diversity are truly included.

Deep learning (DL) and machine learning (ML) methods have recently contributed to the advancement of models in the various aspects of prediction, planning, and uncertainty analysis of smart cities and urban development. This paper presents the state of the art of DL and ML methods used in this realm. Through a novel taxonomy, the advances in model development and new application domains in urban sustainability and smart cities are presented. Findings reveal that five DL and ML methods have been most applied to address the different aspects of smart cities. These are artificial neural networks; support vector machines; decision trees; ensembles, Bayesians, hybrids, and neuro-fuzzy; and deep learning. It is also disclosed that energy, health, and urban transport are the main domains of smart cities that DL and ML methods contributed in to address their problems.

Human-Computer Interaction, including technology-aided instruction, is beginning to focus on virtual reality (VR) technology due to its ability to support immersive learning, teaching through simulation, and gamification of learning. These systems can deliver high-level multisensory learning experiences that are important in the teaching of many subjects, especially those involving abstract concepts or requiring spatial skills, such as organic chemistry. Haptic experiences with VR, however, remain a challenge. In addition, development have focused on general entertainment/gaming; VR systems in chemistry implement simulations of the chemistry laboratory and other advanced systems whereas those that support safe, game-like, immersive and multisensory learning of organic chemistry with haptics at pre-university education levels are scarce. We developed the VR Multisensory Classroom (VRMC) as an immersive learning environment within a VR head-mounted display, where learners employ hand movements to build hydrocarbon molecules and experience haptic feedback through gloves with built-in sensors and hand-tracking with the Leap Motion system. We report here the evaluation of the first prototype by learners from diverse backgrounds who reported on the ability of the VRMC to support high engagement, motivation, interest and organic chemistry learning as well as diverse learning styles. The VRMC is a novel VR classroom that supports immersive learning in molecular organic chemistry with haptics for multisensory learning.

The purpose of this finite element analysis (FEA) was to evaluate the stress experienced by both the prosthetic components and the bone in relation to varying cement thicknesses ranging from 20 to 60 μm, utilized in the attachment of a zirconia crown on a conometric cap. The study focused on two distinct types of implants (Cyroth and TAC, AoN Implants, Grisignano di Zocco, Italy) featuring a Morse cone connection. Detailed three-dimensional (3D) models were created to repre-sent the bone structure (cortical and trabecular) and the prosthetic components, encompassing the crown, cement, cap, abutment, and the implant. The two implants were placed in a 1.5 mm sub-crestal position and subjected to an inclined load of 200 N at 45° on the crown. The results re-vealed that an increase in cement thickness resulted in a reduction of von Mises stress on the cor-tical bone for both Cyroth and TAC implants, while the decrease in stress on the trabecular bone was relatively less pronounced. However, the TAC implant exhibited a higher stress field and de-formation in the apical area compared to the Cyroth implant. In summary, this study investigated the impact of cement thickness on stress transmission across prosthetic components and peri-implant tissues by means of FEA analysis, indicating that the 60 μm cement layer manifested higher stress values nearing the material strength limit.

In this study, the biodegradation properties of leather treated with various finishing chemicals were evaluated in order to enhance the sustainability of leather processing. We applied advanced analytical techniques including FT-IR, thermogravimetric analysis (TGA), and solid-state NMR spectroscopy. Leather samples treated with different polymers, resins, bio-based materials, and traditional finishing agents were subjected to a composting process under controlled conditions to measure their biodegradability. The findings revealed that bio-based polyurethane finishes and acrylic wax exhibited biodegradability, while traditional chemical finishes like isocyanate and nitrocellulose lacquer showed moderate biodegradation levels. The results indicated significant differences in the biodegradation rates and the impact on plant germination and growth. Some materials, such as black pigment, nitrocellulose lacquer and wax, were beneficial for plant growth, while others, such as polyurethane materials, had adverse effects. These results support the use of eco-friendly finishes to reduce the environmental footprint of leather production. Overall, this study underscores the importance of selecting sustainable finishing chemicals to promote eco-friendly leather manufacturing practices.

The present study evaluates mold fungal resistance of newly developed loose-fill thermal insulation materials from wheat straw, corn stalk and water reed. Three different processing methods of raw materials was performed by mechanical crushing (Raw, ≤ 20 mm), thermal-mechanical pulping (TMP) using 4% NaOH and steam explosion pulping (SEP). An admixture of boric acid (8%) and tetraborate (7%) was applied to all processed substrates due to their anti-fungal properties. Additionally, the fourth sample group was prepared from SEPs of all raw species without boric acid and tetraborate (SEP*) as control. Samples from all treatments were separately inoculated by 5 different fungal species and incubated in darkness for 28 days at 28 ℃ and RH &gt;90%. The highest resistance to the colonization of mold fungi was achieved by TMP and SEP processing coupled with addition of boric acid and tetraborate, where molds infest only around 35% to 40% of the inoculated sample area. The lowest mold fungi resistance was detected for Raw and SEP* samples, each ~75% that was affected by rich amount of accessible nutrients, suggesting that boric acid and tetraborate additives alone did not prevent mold fungal growth as effective as in combination with TMP and SEP treatments. Together, the achieved fungal colonization scores after combined fungicide and pulping treatments are acceptable for the application of various renewable materials in future thermal insulation product development.

In recent years, there has been a growing interest in the preoperative modeling of fluid-structure interaction in the treatment of cerebral aneurysms. In this study, we investigate two cases involving laminar incompressible fluid flow interacting with hyperelastic materials (a vertical flap and aneurysm walls) under the effect of fluid flow. We present a finite element method (FEM) for these prototypical two-dimensional ($2D$) configurations, taking into account the complex flows and deformation of the variant's structure models. We use an Arbitrary Lagrangian-Eulerian (ALE) formulation in a continuum, fully monolithic coupled way, and discretize the fluid and solid domains using the quadratic LBB stable $P_2P_1$ finite element pair to approximate the displacement, velocity, and pressure spaces independently. The resulting discretized form of the nonlinear algebraic system is linearized using a variant of Newton's procedure, and the Jacobian matrices are approximated via the divided difference method. The resulting linear systems are solved using a direct solver MUMPS. We evaluate hydrodynamic forces such as drag and lift coefficients for nonlinear elastic material models, including Saint-Venant Kirchoff, Neo-Hookean, and Mooney-Rivlin (2 parameters) separately. To gain more physical insight into the problem, we verify the computed results by comparing the velocity, viscosity, and pressure fields. Our aim is to qualitatively analyze the changes in the mechanics of the wall behavior of the elasticity of the flap vs. the complexity of deformation, interface, details for prototypical flow situations, corresponding displacement, and deformation. We also provide a physical interpretation of blood flow magnitude and basic hemodynamic phenomena of wall shear stresses (WSS) in aneurysma and the range of deformation. Overall, this study presents a comprehensive approach to modeling fluid-structure interaction in cerebral aneurysms, which could help in the development of more effective treatment strategies.

Since its introduction, back in the late 1970s, the non-affine or slip parameter, ξ, has been routinely employed by numerous constitutive models as a constant parameter. However, the evidence seems to imply that it should be a function of polymer deformation. In the present work, we phenomenologically modify a constitutive model for the rheology of unentangled polymer melts [P. S. Stephanou et al. J. Rheol. 53, 309 (2009)] to account for a non-constant slip parameter. The revised model predictions are compared against newly accumulated rheological data for a C48 polyethylene melt obtained via direct non-equilibrium molecular dynamics simulations in shear. We find that the conformation tensor data are very well predicted; however, the predictions of the material functions are noted to deviate from the NEMD data, especially at large shear rates.

Miniaturization of electronics devices is often limited by the concomitant high heat fluxes (cooling load) and maldistribution of temperature profiles (hot spots). Thermal energy storage (TES) platforms providing supplemental cooling can be a cost-effective solution, that often leverages phase change materials (PCM). Although salt hydrates provide higher storage capacities and power ratings (as compared to that of the organic PCMs), they suffer from reliability issues (e.g., supercooling). ‘Cold Finger Technique (CFT)’ can obviate supercooling by maintaining a small mass fraction of the PCM in solid state for enabling spontaneous nucleation. Optimization of CFT necessitates real-time forecasting of the transient values of the melt-fraction. In this study artificial neural network (ANN) is explored for real-time prediction of the time remaining to reach a target value of melt-fraction based on the prior history of the spatial distribution of the surface temperature transients. Two different approaches were explored for training the ANN model, using: (1) transient PCM-temperature data; or (2) transient surface-temperature data. When deployed in a heat sink that leverages PCM based passive thermal management systems for cooling of electronic chips and packages, this maverick approach (using the second method) affords cheaper costs, better sustainability, higher reliability and resilience.

In this article, the effect of substitution of Zr and Ga in Dy2Fe17 prepared by arc melting technique are studied. The substitution of Zr and Ga in Dy2Fe17 was found to have an important effect on their structure and magnetic properties. The Rietveld analysis conformed that the crystalline system wereTh2Ni17 structure. Lattice parameters a (Å) and c (Å), unit cell volume (Å3), bonding distance (Å) were calculated by using Rietveld analysis. The unit cell volume of Dy2Fe17-xZrx and Dy2Fe16Ga1-xZrx increase linearly with the Zr and Ga substitution. The substitution of Zr and Ga are limited up to x=1 in order to avoid the decrease in saturation magnetization. The Curie temperature (Tc) of Dy2Fe17-xZrx and Dy2Fe16Ga1-xZrx are found to be Zr content dependent. The Curie temperature is found to be increasing first and then decrease for higher Zr content. The maximum curie temperature was observed 510K at x = 0.75 for Dy2Fe17-xZrx and 505.1 K at x = 0.5 for Dy2Fe17-xZrx which are102 K and 97 K higher than Dy2Fe17. The room temperature Mössbauer analysis shows the decrease in average hyperfine field and increase in isomer shift with Zr doping.

MPC (Magneto-Photonic Crystal) Optimisation is a feature-rich Windows software application designed to enable researchers to analyze the optical and magneto-optical spectral properties of multilayers containing gyrotropic constituents. A set of computational algorithms aimed at enabling the design optimization and optical or magneto-optical (MO) spectral analysis of 1D magnetic photonic crystals (MPC) is reported, together with its Windows software implementation. Relevant material property datasets (e.g., the optical spectra of refractive index, absorption, and gyration) of several important optical and MO materials are included, enabling easy reproduction of the previously published results from the field of MPC-based Faraday rotator development, and an effective demonstration-quality introduction of future users to the multiple features of this package. We also report on the methods and algorithms used to obtain the absorption coefficient spectral dispersion datasets for new materials, for which the film thickness, transmission spectrum, and refractive index dispersion function are known.

Here, we report on ZnO nanoparticles (NPs) generated by nanosecond pulsed laser (Nd:YAG, 1064 nm) through ablation of metallic Zn target in water and air and their comparative analysis as potential nanomaterials for biomedical applications. The prepared nanomaterials were carefully characterized in terms of their structure, composition, morphology and defects. It was found that in addition to the main wurtzite ZnO phase, which is conventionally prepared and reported by others, the sample laser-generated in air also contained some amount of monoclinic zinc hydroxynitrate. Both nanomaterials were then used to modify model wound dressings based on biodegradable poly-L-lactic acid. The as-prepared model dressings were tested as biomedical materials with bactericidal properties towards S. aureus and E. coli strains. The advantages of the NPs prepared in air over their counterparts generated in water found in this work are discussed.

Energy is a fundamental ingredient in economic development and energy consumption is an index of prosperity and the standard of living. The consumption of energy has increased significantly in the last number of decades, as the standard of living has improved. Renewable energy is a sustainable and clean source of energy derived from nature. Renewable energy technology is one of the solutions, which produces energy by transforming natural resources into useful energy forms. When you do something for the first time in the world, you never attain a perfect product or solution from the start. In Central Greece Lamia city, we are the first to design and implement an off-grid energy system using hydrogen energy storage technology and phase change materials for a house residence. The action plan for energy efficiency, a series of directives and incentive mechanisms, mandatory energy certification of buildings, indicate the urgent need to reduce energy consumption in buildings, which results in a more comfortable living, long service life of buildings, which in turn preserves the environment.

This study explores the optimization of the admission process at the Escuela Colombiana de Ingeniería Julio Garavito through data anal- ysis. By integrating advanced tools like Power BI, Python Flask, and data mining techniques, a model has been developed to improve student selection and retention, enabling more informed and effective decisions. The results indicate that applying data science not only facilitates efficient data management but also promotes more inclusive and equitable educational poli- cies. This pioneering approach in the field of higher education in Colombia offers a frame- work for future research and technological de- velopments, highlighting the vital importance of data science in improving educational and administrative processes

This work presents a historical-epistemological analysis of the foundations of quantum mechanics. From a philosophical point of view, the relationships between quantum mechanics and scientific realism are highlighted, as well as the influence of the neo-positivist philosophy of the first decades of the 20th century. The great significance of measurement in the context of quantum mechanics is underlined, as an essential element in providing a coherent description of reality moving from the microcosm to the macrocosm, as well as the role that the measurement apparatus and the consciousness of the observer assume during the act of measurement, the ontological problem, the problem of the objectification of the wave function and the problem of the definition of discernibility. This is followed by an overview of the most important alternative proposals to the standard interpretation (Copenhagen interpretation), with particular reference to hidden variable theories, and other alternatives to standard quantum mechanics that profoundly modify the vision of reality, such as the Everett’s many-worlds theory, the QBism, the unified holistic approach.

Abstract: Background: The practice of menstrual hygiene(MH) is a public health issue and depends on various factors. Taboos and incorrect MH practices can lead to health hazards. This study aimed at assessing the Knowledge, Attitude, and Practice of MH among the female students and faculty of Medical and Health Sciences University. Materials and methods: This cross-sectional questionnaire survey between February and June 2023 using consecutive sampling. Univariate analysis and comparisons were done with a significant p-value <.05. Results: A total of 253 women participated in the study. The knowledge and practices of MH were good. There were significantly more irregular and painful periods in younger females (p=.005,.0001). 89% of women used disposable pads and least used menstrual cups. Younger women were unaware of menstrual cloth. The attitude towards menses varied, with younger females feeling annoyed (p=.002), and older females embarrassed (p=.0001) at menarche. About 1/3rd of participants perceived menstrual blood as unhygienic. Younger women were more open about talking about menses (p=.005). Conclusion: There was good knowledge and practices of MH among participants. There were differences in menstrual history and attitude among older and younger women. The attitude and beliefs vary among the participants, due to sociocultural factors and age differences.

Since its inception in the late 2000s, blockchain has emerged as a powerful tool for creating trust without intermediaries to incentivize global communities for working for a common goal, such as the improvement of its very ecosystem, its applications and community adoption. While first blockchains were mainly devised for confirming transactions of their innate cryptocurrencies like Bitcoin, smart-contract blockchains like Ethereum can interface with the real-world through so-called “oracles”, which feed trustful off-chain information. This paper introduces digital twins of physical objects and processes as computational oracles to effectively unleash the tremendous opportunity offered by blockchain to the realm of fundamental science, research and technology development (RTD). The crowdsourcing concept is illustrated with the example of centrifugal flow control in microfluidic “Lab-on-a-Disc” (LoaD) systems.

This pilot study explores the potential of using a citizen science approach for sourcing volunteered geographic information via social media to research wildlife tourism interactions with endangered Borneo Pygmy Elephants on the lower Kinabatangan River in Sabah, Malaysia. Such information is critical if the lower Kinabatangan region is to achieve the United Nations Sustainable Development Goals through a sustainable tourism industry based around viewing the pygmy elephants. Guests and guides from the Sukau Rainforest Lodge were encouraged to become close-range remote sensors by sharing geotagged photographs of pygmy elephant sightings on Flickr. A ten week on-ground trail generated 247 photographs shared by 17 individual contributors with approximately two-thirds (65%) of photographs being georeferenced for the time and location of the elephant sighting. Plotting those sighting to explore the vegetation matrix (i.e. remnant forest or oil palm plantation) showed almost three-quarter (73%) of the sightings occurred within 1 km of an oil palm plantation. Of greater concern is that one in two sightings (50%) along the river occurred within the 500 m of an oil palm planation, which is inside the riparian buffer that the Sabah Government recommended for conservation of the elephants in their Lower Kinabatangan range. This study therefore demonstrates proof of concept for this research method and its further application at the nexus of wildlife conservation and sustainable ecotourism research.

The whimsical Las Vegas/Monte Carlo cubic dice are generalized to construct the combinatorial problem of enumerating all n-dimensional hypercube dice, and dice of other shapes that exhibit cubic, icosahedral and higher symmetries. By utilizing powerful generating function techniques for various irreducible representations, we derive the combinatorial enumerations of all possible dice in n-dimensional space with hyperoctahedral symmetries. Likewise a number of shapes that exhibit icosahedral symmetries such as a truncated dodecahedron and a truncated icosahedron are considered for the combinatorial problem of dice enumerations with the corresponding shapes. We consider several dice with cubic symmetries such as truncated octahedron, dodecahedron and Rubik’s cube shapes. It is shown that all enumerated dice are chiral and we provide the counts of chiral pairs of dice in the n-dimension space. During the combinatorial enumeration, it was discovered that two different shapes of dice exist with the same chiral pair count culminating into the novel concept of isochiral polyhedra. The combinatorial problem of dice enumeration is generalized to multi-coloring partitions. Applications to chirality in n-dimension, molecular clusters, zeolites, mesoporous materials, cryptography and biology are also pointed out. Applications to nonlinear n-dimensional hypercube and other dicey encryptions are exemplified with romantic, clandestine messages; “I love U” and “V Elope at 2”.

Nanomaterials based on metal oxides (MexOy) are employed as catalysts and/or sorbents in processes undergoing conditions in supercritical water (scH2O), the “green” reaction medium used to obtain energy relevant products. Their properties are greatly affected by the synthesis method used to produce the active MexOy. Moreover, in order to maintain their performance, it is more practical and cost-effective to use supported MexOy nanoparticles. Within this context, the present work deals with the preparation of carbon-supported ZnO and CuO composites by an innovative method based on impregnation under scH2O conditions. Metal oxides were impregnated on a carbon (C) support using a continuous flow tubular reactor. The results show that impregnation in scH2O is a promising approach for the preparation of ZnO/C and CuO/C composite materials. This one-step synthesis method, in a continuous flow, uses neither seed layer nor mineralizer, and it needs substantially lower preparation times than the conventional impregnation methods.

Photophysics properties such as fluorescence quenching, and photoexcitation dynamics of bimolecular non-covalent systems consisting of cationic poly[(9,9-di(3,3’-N,N’-trimethyl-ammonium) propyl fluorenyl-2,7-diyl)-alt-co-(9,9-dioctyl-fluorenyl-2,7-diyl)] diiodide salt (PFN) and anionic graphene carboxylate (GC) have been discovered for the first time by the steady state and time-resolved femtosecond transient absorption (TA) spectroscopy with broadband capabilities. The steady-state fluorescence of PFN is quenched with high efficiency by GC acceptor. Fluorescence lifetime measurements revealed that the quenching mechanism of PFN by GC is static. Here, the quenching mechanisms are well proven by TA spectra of PFN/GC systems. For PFN/GC systems, the photo electron transfer (PET) and charge recombination (CR) processes are ultrafast (within few tens of ps) related to static interactions whereas for PFN/DCB systems the PET takes place in few hundreds ps (217.50 ps)1 suggesting diffusion-controlled PET process. In the latter case, the PFN+•-DCB-• radical ion pairs as the result of PET from the PFN to DCB are clearly resolved and they are long-lived. The slow CR process (in 30 ns time scales)1 suggest PFN+• and DCB-• may already form separated radical ion pairs through charge separation (CS) process, which recombined back to the initial state with a characteristic time constant of 30 ns. The advantage of the present positively charged polyfluorene used in this work is the control over the electrostatic interactions and electron transfers in non-covalent polyfluorene/quencher systems in DMSO solution.

Geothermal energy is a weather-independent, permanently available renewable energy source. In addition to producing heat and electricity, geothermal energy can be used to extract critical raw materials dissolved in the heat-carrying fluid. Researchers working on the frontiers of geothermal energy utilisation may be able to transform ultra-deep metallic mineral formations into “orebody-Enhanced Geothermal Systems”. In the planned technology, the metal-containing geological formation would be manipulated in such a way that cogeneration of energy and metals is possible and can be optimised in the future according to market needs. The potential of geothermal energy for sustainable mineral extraction and energy production aligns with Sustainable Development Goal (SDG) 7, which aims to ensure access to affordable, reliable, sustainable, and modern energy for all. This new technology could substantially decrease Europe’s dependency on importing critical metallic minerals (such as lithium and tungsten) and energy; over and above, it has a small environmental footprint, including very low carbon emissions

Using valid experimental parameters we quantify the magnitude of resonantly phonon-driven precession of exchange magnons in freestanding ferromagnetic nickel thin films on their thickness L. Analytical solutions of acoustically driven equations for magnon oscillators display a nonmonotonous dependence of the peak magnetization precession on the film thickness. It is explained by different L-dependence of multiple prefactors entering in the expression for the total magnetization dynamics. Depending on the ratio of acoustic and magnetic (Gilbert) damping constants, the magnetization precession is shown to be amplified by a Q-factor of either the phonon or the magnon resonance. The increase of the phonon mode amplitude for thinner membranes is also found to be significant. Focusing on the magnetization dynamics excited by the two first acoustic eigenmodes with p=1 and p=2 we predict the optimum thicknesses of nickel membranes to achieve large amplitude magnetization precession at multi 100 GHz frequencies at reasonably low values of an external magnetic field.

An inter- and transdisciplinary concept has been developed, focusing on the scaling of industrial circular construction using innovative compacted mineral mixtures (CMM) derived from various soil types (sand, silt, clay) and recycled mineral waste. The concept aims to accelerate the systemic transformation of the construction industry towards carbon neutrality by promoting the large-scale adoption and automation of CMM-based construction materials, which incorporate natural mineral components and recycled aggregates or industrial by-products. In close collaboration with international and domestic stakeholders in the construction sector, the concept explores the integration of various CMM-based construction methods for producing wall elements in conventional building construction. Leveraging a digital urban mining platform, the concept aims to standardize the production process and enable mass-scale production. The ultimate goal is to fully harness the potential of automated CMM-based wall elements as a fast, competitive, emission-free, and recyclable alternative to traditional masonry and concrete construction techniques. To achieve this objective, the concept draws upon the latest advances in soil mechanics, rheology, and automation and incorporates open-source digital platform technologies to enhance data accessibility, processing, and knowledge acquisition. This will bolster confidence in CMM-based technologies and facilitate their widespread adoption. The extraordinary transfer potential of this approach necessitates both basic and applied research. As such, the proposed transformative, inter- and transdisciplinary concept will be conducted and synthesized using a comprehensive, holistic, and transfer-oriented methodology.

Vacuum drying can dehydrate materials further than dry heat methods while protecting sensitive materials from thermal degradation. Many industries have shifted to vacuum drying as cost- or time-saving measures. Small-scale vacuum drying, however, has been limited by high costs of specialty scientific tools. To make vacuum drying more accessible, this study provides design and performance information for a small-scale open source vacuum oven, which can be fabricated from off-the-shelf and 3-D printed components. The oven is tested for drying speed and effective-ness on both waste plastic polyethylene terephthalate (PET) and a consortium of bacteria developed for bioprocessing of terephthalate wastes to assist in distributed recycling of PET for both additive manufacturing as well as potential food. Both materials can be damaged when exposed to high temperatures, making vacuum drying a desirable solution. The results showed the open source vacuum oven was effective at drying both plastic and biomaterials, drying at a higher rate than a hot-air dryer for small samples or for low volumes of water. The system can be constructed for less than 20% of commercial vacuum dryer costs for several laboratory-scale applications including dehydration of bio-organisms, drying plastic for distributed recycling and additive manufacturing, and chemical processing.

Building envelope can play a crucial role in building improvement efficiency and the adoption of Phase Change Materials (PCMs) coupled with transparent elements may (i) allow a better control of the heat flows from/to the outdoor environment, (ii) increase the exploitation of solar energy at building scale and (iii) modulate the light transmission to avoid glare effects. Starting from a literature review of experimental works, this research identifies the main possible integration of PCM in transparent/translucent building envelope components (in glazing, in shutters and in multilayer façade system) drawing a global picture potentials and limitations of these technologies. Transparent envelopes with PCMs have been classified from the simplest “zero” technology, which integrates the PCM into the double glass unit (DGU), to more complex solutions – with different numbers of cavities of the glass (TGU), different position of PCM layer (internal/external shutter), and in combination with other materials (TIM, aerogel, prismatic solar reflector, PCM curtain controlled by an electric pump). The results of the analysis are resumed in a SWOT (strengths, weakness, opportunities and threats) analysis table to underline strengths and weaknesses of transparent building envelope components with PCMs, and to indicate opportunities and threats for future research and building application.

In our study we investigated the additive manufacturing (AM) of ceramic-based Functionally Graded Materials (FGM) by the direct AM technology Thermoplastic 3D-Printing (T3DP). Zirconia components with a varying microstructure were additively manufactured by using thermoplastic suspensions with different contents of pore forming agents (PFA) and were co-sintered defect-free. Different materials were investigated concerning their suitability as PFA for the T3DP process. Different zirconia-based suspensions were prepared and used for AM of single- and multi-material test components. All samples were sintered defect-free and in the end we could realize a brick wall-like component consisting of dense (<1% porosity) and porous (approx. 5% porosity) zirconia areas to combine different properties in one component. The T3DP opens the door to AM of further ceramic-based 4D-components like multi-color or multi-material, especially multi-functional components.

This report describes the experience in implementing the FAIR principles for the GoTriple Discovery Platform for the Social Sciences and Humanities (SSH). It shows how adherence to FAIR should be considered as a continuous process throughout the entire lifespan of any information management system, including GoTriple, rather than a static goal with decisions only made at design time. The report presents an introduction highlighting the importance of the FAIR principles, indicating how they can be assessed in data management systems. Then the GoTriple case is presented, with a general overview of this discovery platform before describing some of the implemented practices in support of FAIR. The Discussion section shows on the one hand some virtuous reuse of GoTriple data, together with one major pitfall in the platform’s FAIR implementation. In this sense, this report serves as a case study that can offer insights and actionable advice for those implementing information systems aligned, from the very outset, with the FAIR principles.

Small-scale facilities play a significant role in the landscape of nuclear physics research in Europe. They address a wide range of fundamental questions and are essential for teaching and training personnel in accelerator technology and science, providing them with diverse skill sets, complementary to large projects. The current status and perspectives of nuclear physics research at small-scale facilities in Europe will be given.

Obstructive Sleep Apnea (OSA) is nowadays one of the respiratory pathologies with a higher in-cidence globally in developed countries. This situation led to an increase in the demand for medical appointments and diagnostic studies related to that condition, especially those based on poly-somnographies and cardiorespiratory polygraphies. These studies are limited in resources, causing long waiting lists with the subsequent impact on the patients’ health. Furthermore, it is necessary to mention that OSA’s symptomatology is not very specific, and it is typically present in the general population (excessive sleepiness, snore, etc.). In this regard, this paper proposes a novel intelligent clinical decision support system for the diagnosis of OSA which could be used to help medical teams, both in primary care settings and in units specialized in respiratory pathologies. The aim of the proposed system is to help discriminate the patients suspected of suffering from the pathology from those who are not. To this end, two types of information sets of heterogeneous nature are consid-ered. The first one encompasses objective data, related to the patient's health profile with infor-mation usually available in electronic health records. The second type comprises subjective data, referred to the symptomatology reported by the patient in a previous interview. To process the first group of information, a Machine Learning classification algorithm is used, Bagged Trees in this case. For processing the second information set, related with the symptomatology of the patient, a col-lection of expert systems based on fuzzy inferential systems arranged in cascade are employed. As a result, the system is able to determine two risk indicators related to the patient's risk of suffering from OSA: the Statistical Risk and the Symbolic Risk respectively. Subsequently, by interpreting both risk indicators mentioned it will be possible to determine the severity of the patients’ health, proposing a preliminary evaluation on their condition. For the initial tests of the system, a software artifact has been built using a dataset with 4,978 selected patients, suspected of suffering from OSA, from the Álvaro Cunqueiro Hospital in Vigo. The results obtained are promising, demonstrating the potential usefulness of this type of tools in medical diagnosis. Once the system has been validated with new data from clinical environments, it is considered as possible to obtain a relevant improvement in the quality of the healthcare services, and a reduction in the associated costs.

Peptides are promising drug development frameworks thanks to their high target selectivity, tolerability and relatively low production cost. However, despite the fact that several thousand potentially therapeutic peptides reported, only sixty have arrived at the market. This concerning low proportion is partially explained by undesired properties such as peptide-induced hemolytic activity. Hence, we aim to get a better insight into the chemical space of hemolytic peptides using a novel approach based on network science and interactive data mining as an alternative to design more effective peptide drugs with low hemolytic activity. Metadata networks (METNs) were used to characterize and find general patterns associated to hemolytic peptides, whereas Half-Space Proximal Networks (HSPNs), created using five different two-way dissimilarity measures, represented the hemolytic peptide space. Then, using the best candidate HSPNs, we extracted various scaffolds that capture information of almost all the chemical space but avoiding peptide overrepresentation. Such scaffolds can have many applications, such as training accurate ML-based prediction models, constructing one-class multi-query similarity searching models and characterizing the diversity of hemolytic peptides using a manageable set of peptides. Finally, by means of an alignment-free approach, we reported 47 putative hemolytic motifs, which might provide hints about the mechanisms of hemolysis and can also be used as toxic signatures when developing novel peptide-based drugs.

Ash trees have considerable economic, cultural and environmental value on the island of Ireland. However, European ash (Fraxinus excelsior L.) is currently under threat from the invasive ascomycete pathogen Hymenoscyphus fraxineus. This pathogen is the causal agent of ash dieback disease, which was initially reported in Poland in 1992. Hymenoscyphus fraxineus has since spread across Europe and the first recorded case of the disease on the island of Ireland was in 2012 at a forestry plantation in Co. Leitrim. The pathogen is now present in all 26 counties in Ireland and 6 counties in Northern Ireland, and it is considered unfeasible to eradicate. The spread of ash dieback disease is reflected in recent policy changes, which focus on management rather than eradication strategies. Since the first formal description of H. fraxineus in 2006, considerable research efforts have been made by the international scientific community to understand the biology of the pathogen and to develop management strategies against it. This review provides an update of current knowledge of H. fraxineus biology and infection. We then explore examples of mitigation techniques that have been trialled in Europe, in order to identify strategies that are feasible for disease management at a local level on the island of Ireland. Finally, we outline five key avenues of research that have the potential to provide breakthroughs in methods to protect valuable F. excelsior resources.

The food system represents a key industry for Europe and particularly Germany. However, it is also the single most significant contributor to climate and environmental change. A food system transformation is necessary to overcome the system's major and constantly increasing challenges in the upcoming decades. One possible facilitator for this transformation are radical and disrup-tive innovations that start-ups develop. There are many challenges for start-ups in general and food start-ups in particular. Various support opportunities and resources are crucial to ensure the success of food start-ups. One aim of this study is to identify how the success of start-ups in the food system can be supported and further strengthened by players in the innovation ecosystem in Germany. There is still room for improvement and collaboration toward a thriving innovation ecosystem. A successful innovation ecosystem is characterised by a well-organised, collaborative, and supportive environment with a vivid exchange between the members in the ecosystem. The interviewees confirmed this, and although the different actors are already cooperating, there is still room for improvement. The most common recommendation for improving cooperation is learning from other countries and bringing the best to Germany.

Artificial intelligence (AI) techniques have grown rapidly in recent years in the context of computing with smart mobile phones that typically allows the devices to function in an intelligent manner. Popular AI techniques include machine learning and deep learning methods, natural language processing, as well as knowledge representation and expert systems, can be used to make the target mobile applications intelligent and more effective. In this paper, we present a comprehensive view on mobile data science and intelligent apps in terms of concepts and AI-based modeling that can be used to design and develop intelligent mobile applications for the betterment of human life in their diverse day-to-day situation. This study also includes the concepts and insights of various AI-powered intelligent apps in several application domains, ranging from personalized recommendation to healthcare services, including COVID-19 pandemic management in recent days. Finally, we highlight several research issues and future directions relevant to our analysis in the area of mobile data science and intelligent apps. Overall, this paper aims to serve as a reference point and guidelines for the mobile application developers as well as the researchers in this domain, particularly from the technical point of view.

This manuscript employs a surface stress-driven nonlocal model to explore the combined effects of long-range interaction and surface energy on higher vibration modes of functionally graded nanobeams. The nanobeam theory, based on Bernoulli-Euler kinematics, incorporates surface effects such as surface elasticity, surface residual stresses, surface density, and rotary inertia. Hamilton's principle is applied to derive the governing equation with size-dependent considerations. The main outcomes of a parametric investigation, considering four different kinematic boundary conditions (Cantilever, Simply-Supported, Clamped-Pinned, and Doubly-Clamped) while varying the nonlocal parameter and material gradient index, are presented and discussed. Additionally, the normalized natural frequencies for the second, third, fourth and fifth modes of vibrations are provided and analyzed for each case under study. The results underscore the model's effectiveness in capturing surface energy effects on the overall dynamic behavior of functionally graded Bernoulli-Euler nanobeams, offering a cost-effective approach for designing and optimizing nano-scaled structures.

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient's unique anatomy. Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.

Despite the development of technologies, modern methods of disposal of end-of-life tires most often represent either the incineration in cement kilns or the destruction of tires in special landfills, showing a lack of sustainable recycling of this valuable material. The fundamental role of recycling is evident, and the development of high-efficiency processes represents a priority for the European market. Therefore, investigation of end-of-life rubber processing methods is of high importance for manufacturers and recyclers of rubber materials. In this paper, methods of processing of end-of-life tires are reviewed in order to obtain rubber crumb, which can later be used in the production of new industrial rubber goods and composite The processes of separation end-of-life tire into fractions by type of materials using mechanical processing methods along with mechanochemical and mechanical processes of processing the materials of used tires in order to obtain crumb rubber of various fractions and chemical reactivity are considered.

Steel reinforcement in concrete has the tendency to corrode and this process can lead to structural damage. FRP reinforcement represents a viable alternative for structures exposed to aggressive environments and has many possible applications where superior corrosion resistance properties are required. The use of FRP rebars as internal reinforcements for concrete, however, is limited to specific structural elements and does not yet extend to the whole structure. The reasons for this relate to the limited availability of curved or shaped reinforcing elements on the market and their reduced structural performance. Various studies, in fact, have shown that the mechanical performance of bent portions of composite bars is reduced significantly under a multiaxial combination of stresses and that the tensile strength can be as low as 25% of the maximum tensile strength that can be developed in the straight part. In a significant number of cases, the current design recommendations for concrete structures reinforced with FRP, however, were found to overestimate the bend capacity of FRP rebar. This paper presents the state-of-the art review of the research works on the strength degradation in curved FRP composites and highlighted the performance of exiting predictive models for the bend capacity of FRP reinforcement. Recent practical predictive model based on the Tsai-Hill failure criteria by considering the material at marcromechanical level is also discussed and highlighted. The review also identifies the challenges and highlights the future directions of research to explore the use of shaped FRP composites in civil engineering applications and the trends for future research in this area.

The binomial nomenclature system, introduced by Carl Linnaeus in the 18th century, has been fundamental for scientific communication and data management. Despite its utility, some scientific names reflect historical biases and ethical issues, including colonial legacies, racism, sexism, and derogatory terms. Recent debates highlight the need to address these injustices, with arguments both for and against revising such names. Critics argue that extensive revisions could disrupt scientific stability, while proponents emphasize the moral imperative to correct these issues. In this opinion paper, we advocate for the establishment of a dedicated committee within international nomenclature bodies to revise taxonomic names with clear ethical concerns and recommend the use of persistent identifiers to effectively manage and track name changes, mitigating potential disruptions to taxonomy and the science that depends on it. By adopting transparent revision processes and making use of digital technology, we can address ethical issues without remarkable upheaval. Science should not perpetuate historical injustices, and it is vital for the scientific community to proactively address social injustices in nomenclature to mitigate ongoing debates and resistance.

Construction Design Management (DM) involves the coordination of design process and activity to ensure quality project design, yet it involves many challenges. This work reports on a collaborative Knowledge Transfer Project (KTP) that tackled several challenges faced by construction design management practitioners. Employing a design science research methodology (DSRM), qualitative analysis of semi-structured interviews with purposively identified design managers first uncovered real world concerns around design coordination, and designer performance monitoring. Then to address these concerns, a web-based design management prototype dashboard was developed which uses typical project data to aid the management of design coordination activity and facilitate design management task prioritization and reporting functionalities. By digitalizing selected design management processes to improve efficiency, and productivity, the visual reporting capability of the dashboard enables design production to be monitored at project and portfolio levels; trends in designer performance to be assessed and focus to be retained on technical queries (TQs) and requests for information (RFIs). By reporting on the development of this web-based Design Management prototype dashboard and illustrating how it can enhance design management productivity in construction firms, this work also provides further evidence of how employing a design science research methodology in construction can produce practical solutions that address real world construction concerns.

The Single Site Order – a policy restricting staff from working at multiple long-term care homes – was mandated by the Public Health Agency of Canada to control the spread of COVID-19 in long-term care homes, where nearly 70% of COVID-19-related deaths in Canada occurred. This mixed methods study assesses the impact of Single Site Order on long-term care residents in British Columbia. Interviews were conducted (residents (n=6), family members (n=9), staff (n=18), and leadership (n=10) from long-term care homes (n=4)) and analyzed using thematic analysis. Administrative data was collected between April 2019 – March 2020 and April 2020 – March 2021 and analyzed using descriptive statistics and data visualization. Qualitative and quantitative data were triangulated and demonstrate staffing challenges became worse during implementation of the SSO resulting in the mental and physical health deterioration of LTC residents. Qualitative data demonstrated decreased time for personalized and proactive care, increased communication challenges, and increased loneliness and isolation. Quantitative data showed a decline in activities of daily living, increased antipsychotic medication use, pressure ulcers, behavioural symptoms, and an increase in falls. Addressing staff workload and staffing shortages during SSO-related policy implementation is essential to avoid resident health deterioration.

Nerve agents have recently been used in battlefield operations, espionage wars and terrorist attacks. These compounds, like some pesticides, cause organophosphate poisoning. The rapid, non-contact detection of a sarin simulant has been demonstrated at the Diagnostics and Metrology Laboratory of the Italian National Agency for New Technologies, Energy and Sustainable Economic Development using laser photoacoustic spectroscopy, an infrared absorption technology. The first measurements, carried out with an experimental system based on a quantum cascade laser and developed for the assessment of food authenticity in the “fingerprint region”, show that a detection limit of 1 nanolitre is within the reach of the instrument when chemometric analysis is applied.

In the present study, the efficiency of a biomimetic approach by coating demineralized bone matrix (DBM) amorphous calcium phosphate (DBM+CaP), including its combination with serum albumin (DBM+CaP+BSA), was investigated. The intact structure of DBM promotes the transformation of amorphous calcium phosphate (CaP) into DPCD with a characteristic plate shape and particle size of 5–35 µm. The inclusion of BSA in the coating resulted in a better and more uniform distribution of CaP on the surface of DBM trabeculae. MG63 cells showed that both the obtained forms of CaP and its complex with BSA did not exhibit cytotoxicity up to a concentration of 10 mg/ml in vitro. Ectopic (subcutaneous) implantation in rats revealed pronounced biocompatibility, as well as strong osteoconductive, osteoinductive, and osteogenic effects for both DBM+CaP and DBM+CaP+BSA, but more pronounced effects for DBM+CaP+BSA. In addition, for the DBM+CaP+BSA samples, a pronounced full physiological intrafibrillar biomineralization and proangiogenic effect with the formation of bone-morrow-like niches, accompanied by pronounced processes of intramedullary hematopoiesis, indicating a powerful osteogenic effect of this composite have been achieved.

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

Interference fits are a very common shaft-hub connection due to their low manufacturing cost and excellent technical properties. Plastic Conditioning of this machine element is a new and not very well known method. By exploiting residual stresses and the associated increase in the yield point, these components can absorb operating loads such as rotating bending moments, torsion, temperature changes and centrifugal forces purely elastically and avoid plastic deformation during operation. Compared to conventionally joined interference fits, the load bearing capacity in the elastic range can be increased by almost 200% and a specifically defined additional safety against plastic deformation in the elastic-plastic range can be ensured. This paper examines the effects of Reverse Yielding on the technology of Plastic Conditioning of Interference Fits in Power Transmission Engineering. Based on the Shear Stress Hypothesis (SH), the Plane Stress State (PSS) and the ideal plastic behavior of materials, the stress-mechanical relationships are explained, the influencing parameters are examined and conclusions are drawn for the plastic conditioning process. Taking into account the theoretical knowledge according to the state of the art, modified material behavior assumptions (isotropic hardening) and the Von Mises Yield Criterion (VMYC) are also considered. In addition, the method of plastic conditioning of interference fits is introduced and its basic principles are briefly explained. Along with computational suggestions to avoid Reverse Yielding, open issues requiring further research are identified.