This work communicates the connection of measured shadowgraphs from optically induced air breakdown with emission spectroscopy in selected gas mixtures. Laser-induced optical breakdown is generated using 850 mJ and 170 mJ, 6-ns pulses at a wavelength of 1064 nm, the shadowgraphs are recorded using time-delayed 5-ns pulses at a wavelength of 532 nm and a digital camera, and emission spectra are recorded for typically a dozen of discrete time-delays from optical breakdown by employing an intensified charge-coupled device. The symmetry of the breakdown event can be viewed as close-to spherical symmetry for time-delays of several 100 ns. Spectroscopic analysis explores well-above hypersonic expansion dynamics using primarily the diatomic molecule cyanide and atomic hydrogen emission spectroscopy. Analysis of the air breakdown and selected gas breakdown events permits the use of Abel inversion for inference of the expanding species distribution. Typically, species are prevalent at higher density near the hypersonically expanding shockwave, measured by tracing cyanide and a specific carbon atomic line. Overall, recorded air breakdown shadowgraphs are indicative of laser-plasma expansion in selected gas mixtures, and optical spectroscopy delivers analytical insight into plasma expansion phenomena.

The mass composition of Particulate Matter (PM) with an aerodynamic diameter of 2.5 microns (PM2.5) in San Joaquin Valley (SJV) is dominated by ammonium nitrate (NH4NO3) which is a secondary pollutant. The goal of this research was the investigation of the relationship between emissions, meteorology and PM2.5 concentrations in Fresno for the winter season. It was found that the location of sites near emission sources such as freeways compared with residential sites strongly affected measured PM2.5 concentrations. It was found that although long-term trends showed declines in both emissions and PM2.5 concentrations there was substantial variability between the years in the PM2.5/emissions relationship. Much of the yearly variation in the relationship between emissions and PM2.5 concentrations can be attributed to yearly variations in weather, such as atmospheric stability, precipitation frequency and average wind speed. There are moderate correlations between PM2.5 concentrations and temperature differences between nearby surface stations at varying elevations which explains some of the daily and seasonal variation in PM2.5. Occurrence of precipitation was related to low PM¬2.5 although the higher wind speeds and lower atmospheric stability associated with precipitation likely explain some of the low PM2.5 as well as washout of PM.

Fibre reinforced cementitious materials (FRC) have become an attractive alternative for structural applications. Among such FRC, steel and polyolefin fibre reinforced concrete and glass fibre reinforced concrete are the most used ones. However, in order to exploit the properties of such materials structural designers need constitutive relations that reproduce FRC fracture behaviour accurately. This contribution analyses the suitability of multilinear softening functions combined with a cohesive crack approach for reproducing the fracture behaviour of the FRC previously mentioned. The implementation performed accurately simulates the fracture behaviour while being versatile, robust and efficient from a numerical point of view.

This work examines atomic and molecular signatures in laser-induced plasma in standard ambient temperature and pressure environments, including background contributions to the spectra that depend on the laser pulse-width. Investigations include solids, gases, and nano-particles. Abel inversions of measured line-of-sight data reveal insight into the radial plasma distribution. For nominal 6 nanosecond laser pulses and for pulse-energies in the range of 100 to 800 mJ, expansion dynamics and turbulence due to shock phenomena are elucidated to address local equilibrium details that are frequently assumed in spatially averaged emission spectroscopy. Chemical equilibrium computations reveal temperature dependence of selected plasma species. Specific interests include atomic hydrogen (H) and cyanide (CN). Atomic hydrogen spectra indicate axisymmetric shell structures and isentropic expansion of the plasma kernel over and above the usual shockwave. The recombination radiation of CN emanates within the first 100 nanoseconds for laser-induced breakdown in a 1:1 CO2:N2 gas mixture when using nanosecond laser pulses to create the micro-plasma. The micro-plasma is generated using 1064 nm, 150 mJ, 6 ns Q-switched Nd:YAG laser radiation. Measurements of the optical emission spectra utilize a 0.64 m Czerny-Turner type spectrometer and an intensified charge-coupled device.

Functional mobility assessments (i.e., Timed Up and Go) are commonly used clinical tools for mobility and fall risk screening in the aging population. In this work, we proposed a new Mixed Reality (MR)-based assessment that utilized a Microsoft HoloLens^TM headset to automatically lead and track the performance of functional mobility tests, and subsequently evaluated its validity in comparison with reference inertial sensors. Twenty-two healthy adults (10 older, 12 young) participated in this study. An automated functional mobility assessment app was developed based on the HoloLens platform. Mobility performance was recorded with the headset built-in sensor and validated with reference inertial sensor (Opal, APDM) taped on the headset and lower back. Results indicate vertical kinematic measures by HoloLens was in good agreement with the reference sensor (Normalized RMSE ~ 10%). Additionally, the HoloLens-based test completion time was in perfect agreement with clinical standard stopwatch measure. Overall, our preliminary investigation indicates that it is possible to use an MR headset to automatically guide users to complete common mobility tests with good measurement accuracy, thus it has great potential to provide objective and efficient sensor-based mobility assessment.

Lineage diversity can refer to the number of genetic lineages within species or to the number of deeper evolutionary lineages, such as genera or families, within a community. Community lineage diversity (CLD) is of interest to ecologists, evolutionary biologists, biogeographers, and those setting conservation priorities. Despite its relevance, it is not clear how to best quantify CLD. With North American tree communities as an example, we test which taxonomic and phylogenetic metrics best measure CLD. We find that phylogenetic metrics outperform taxonomic metrics. Faith’s phylogenetic diversity performs well, but is skewed towards the number of lineages in recent time. The best metric is newly derived here, and termed time integrated lineage diversity (TILD). Mapping the lineage diversity of tree communities across the contiguous United States, we find a spatial pattern differing from that of species richness in key areas. The Pacific Northwest, Great Lakes Region, state of Maine, and south-eastern piedmont and coastal plain forests all emerge as areas high in lineage diversity, but relatively lower in species richness. We urge the consideration of lineage diversity, as well as species richness, when setting conservation priorities.

This paper discusses a MEMS switch that can be fabricated using low temperature (<100^oC) deposition and patterning techniques suitable for the back-end-of-the-line integration with CMOS. The resulting cross-bar switches can be used for electrostatic discharge protection, FPGA implementation, chip security assessment and lock-down, and circuit block power management. We discuss platinum and iron switch with turn-on voltages of ~ 1.8 V. In the case of the iron switches, we also show that they can be magnetized to have “memory” and stay on when turned on. Platinum switch cycling of up to 1000 times did not show any changes in their turn-on voltage and their contact resistance was unchanged. The 10-100 nm switch airgaps were formed using low temperature sputtered sacrificial polysilicon and XeF₂ etching. XeF₂ does not attack any of the metals used in CMOS enabling fabrication of cross-bar switches with any of these metals. Once activated, it takes ∿ 6 to mechanically turn on the switch that can be decreased to ~1 ns by optimizing the device structure. Interestingly, the nm-scale gaps can be used as spark gap as a fast plasma switch to discharge first followed by the activation of the MEMS switch.

Polyolefin fibre reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibres can meet the requirements in the standards, although the main constitutive relations are based on the experience with steel fibres. Therefore, the structural contributions of the fibres should be assessed by inverse analysis. In this study, the fibre dosage has been fixed at 6kg/m³ and both self-compacting concrete and conventional concrete have been used to compare the influence of the positioning of the fibres. An idealized homogeneous distribution of the fibres with such fibres crossing from side to side of the specimen has been added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens have been reproduced by using the cohesive crack approach. Hence, the constitutive relations were found. The significance of this research relies on the verification of the formulations found to build the constitutive relations. Moreover, with these results it is possible to establish the higher threshold of the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.

In this paper, spatial pulse position modulation (SPPM) is used as a case study to investigate the performance of the optical spatial modulation (SM) technique in outdoor atmospheric turbulence (AT). A closed-form expression for the upper bound on the asymptotic symbol error rate (SER) of SPPM in AT is derived and validated by closely-matching simulation results. The error performance is evaluated in weak to strong AT conditions. As the AT strength increases from the weak to strong, the channel fading coefficients become more dispersed and differentiable. Thus, a better error performance is observed under moderate-to-strong AT compared to weak AT. The performance in weak AT can be improved by applying unequal power allocation to make FSO links more distinguishable at the receiver. Receive diversity is considered to mitigate irradiance fluctuation and improve the robustness of the system to turbulence-induced channel fading. The diversity order is computed as half of the number of detectors. Performance comparisons, in terms of energy and spectral efficiencies, are drawn between the SPPM scheme and conventional MIMO schemes such as repetition coding and spatial multiplexing.

We asked whether the level of peripheral fatigue would differ when three consecutive exercise trials were completed to task failure, and whether there would be delayed recovery in maximal voluntary contraction (MVC) force, neuromuscular activation and peripheral fatigue following task failure. Ten trained sport students performed three consecutive knee extension isometric trials (T1, T2, T3) to task failure without breaks between trials. T1 and T2 consisted of repeated 5-s contractions followed by 5-s rest. In T1, contractions were performed at a target force at 60% pre-exercise MVC. In T2, all contractions were MVCs, and task failure occurred at 50% MVC. T3 was a sustained MVC performed until force fell below 15% MVC. Evoked force responses to supramaximal electrical femoral nerve stimulation were recorded to assess peripheral fatigue. Electromyography signals were normalized to M-wave amplitude to assess neuromuscular activation. Lower levels of evoked peak forces were observed at T3 compared to T2 and T1. Within 5 s of task failure in T3, MVC force and neuromuscular activation recovered substantially without any recovery in evoked peak force. Neuromuscular activation 5-10 s after T3 was unchanged from pre-exercise values, but evoked peak forces were substantially reduced. These results challenge the existence of a critical peripheral fatigue threshold that reduces neuromuscular activation. Since neuromuscular activation changed independently of any change in evoked peak force, immediate recovery in force production after exercise is due to increased central recruitment and not to peripheral mechanisms.

The Inefficient water use, varying and low productivity in Kenya public irrigation schemes is a major concern. It is therefore necessary to periodically monitor and evaluate the performance of public irrigation schemes. The performance of public irrigation in western Kenya was assessed by combining benchmarking methodology and principal component analysis. The aim was to quantify and rank the performance of pumped public irrigation schemes in Kenya. Eleven benchmarking indicators were computed for the period from 2012 to 2016 and compared to global benchmark values. The indicators used fall under agricultural productivity, water supply and financial performance categories. The computed agricultural productivity was 36%–51% in Ahero, 23%–42% in West Kano and 26%–50% Bunyala irrigation scheme. Water supply performance in Ahero, West Kano and Bunyala irrigation schemes varied from 24% to 58%, 3% to 49% and 19% to 43% respectively. Financial performance varied from 46% to 54% in Ahero, 25% to 32% in West Kano and 54%–56% in Bunyala irrigation scheme. An average overall performance efficiency of 46%, 39% and 31% was obtained in Ahero, Bunyala and West Kano irrigation schemes respectively. The performance of the irrigation schemes is very poor and measures on improving performance are needed.

Work reviews the new isolated isolated cembranoid diterpene derivatives from species belonging to the family Alcyoniidae, which comprises the genera Sarcophyton, Sinularia, and Lobophytum as well as their biological properties, during 2016–2017. The compilation permitted to conclude that much more new cembranoid diterpenes were found in the soft corals of the genus Sarcophyton sp. (33 new compounds) than in those belonging to the genera Lobophytum (17) or Sinularia (8). Several methods have been used for identifying these new compounds, after extraction with organic solvents and fractionation. The fractions obtained, in some cases, were followed by TLC, and again subjected to chromatographic procedures, including semi-preparative HPLC. Beyond the chemical composition, the biological properties were also evaluated, namely anti-microbial against several Gram-positive and Gram-negative bacteria and fungi, anti-inflammatory and anti-tumoral against several types of cancer cells. Although the biological activities detected in almost all samples, they were not outstanding ones.

Present work has systematically investigated the evolution of dispersoid and elevated-temperature properties including the strength and creep resistance during the various multi-step heat treatments in Al-Mn-Mg 3004 alloys. Results show that only α-Al(MnFe)Si dispersoid is observed in the studied temperature range (up to 625°C) and it coarsens with increasing temperature to 500°C but dissolves at 625°C. The evolution of elevated-temperature strength and creep resistance is greatly related to the temperature of each step during the multi-step heat treatments. Generally, lower temperature at the first-step heat treatment leads to higher properties while the properties decrease with increasing temperature of last-step heat treatment. Suitable models have been introduced to explain the evolution of strength and the creep threshold stress at elevated-temperature during the various heat treatments.

Agavins consumption has lead to accelerate body weight loss in mice. We investigated the changes on cecal microbiota and short chain fatty acids (SCFA) associated to body weight loss in overweight mice. Firstly, mice were fed with standard (ST5) or high fat (HF5) diet for 5 weeks. Secondly, overweight mice were shifted to standard diet alone (HF-ST10) or supplemented with agavins (HF-ST+A10) or oligofructose (HF-ST+O10), five more weeks. Cecal contents were collected before and after supplementation to determine microbiota and SCFA concentrations. At the end of first phase, HF5 mice showed a significant increase of body weight, which was associated with reduction of cecal microbiota diversity (PD whole tree; non-parametric t-test, P < 0.05), increased Firmicutes/Bacteroidetes ratio and reduced SCFA concentrations (t-test, P < 0.05). After diet shifted, HF-ST10 normalized its microbiota, increase its diversity and SCFA levels, whereas agavins (HF-ST+A10) or oligofructose (HF-ST+O10) led to partial microbiota restoration, with normalization of the Firmicutes/Bacteroides ratio as well as higher SCFA levels (P < 0.1). Moreover, agavins noticeably enriched Klebsiella and Citrobacter (LDA > 3.0); this enrichment has not been reported previously under a prebiotic treatment. In conclusion, agavins or oligofructose modulated cecal microbiota composition, reduced extent of diversity and increased SCFA. Furthermore, identification of bacteria enriched by agavins, opens opportunities to explore new probiotics.

Coastal inundation is an increasing problem. Sea-level rise will greatly increase the frequency and depth of inundation, forcing vulnerable communities to adapt. Communities will need to decide when and how to adapt. The process of decision-making along adaptive pathways is now being used internationally to plan for adaptation over time by anticipating decision points in the future however it unfolds. This process requires risk and uncertainty considerations to be transparent in the scenarios used in such planning. We outline a framework for uncertainty identification and management within coastal hazard assessments which recognizes different types of decision and identifies the types of uncertainty that must be accounted for, such as statistical, scenario and deep uncertainty types. We show how coastal-inundation hazard can be mapped and presented in a way that clearly separates sources of uncertainty, so that they are transparent within a dynamic adaptive pathways planning process. Traditional coastal inundation maps show inundated area only. We present maps of inundation depth and frequency which clearly show the degree of exposure, where that exposure occurs, and how much sea-level rise can be tolerated. The new uncertainty framework and mapping techniques can better identify decision points and their expected time range, which provides more useful input to the adaptation process than traditional coastal inundation assessments.

Alkali Silica Reaction (ASR) is known to be a serious problem for concrete worldwide, especially in high humidity and high temperature regions. ASR is a slow process that develops over years to decades and it is influenced by changes in environmental and loading conditions of the structure. The problem becomes even more complicated if one recognizes that other phenomena like creep and shrinkage are coupled with ASR. This results in synergistic mechanisms that can not be easily understood without a comprehensive computational model. In this paper, coupling between creep, shrinkage and ASR is modeled within the Lattice Discrete Particle Model (LDPM) framework. In order to achieve this, a multi-physics formulation is used to compute the evolution of temperature, humidity, cement hydration, and ASR in both space and time, which is then used within physics-based formulations of cracking, creep and shrinkage. The overall model is calibrated and validated on the basis of experimental data available in the literature. Results show that even during free expansions (zero macroscopic stress), a significant degree of coupling exists because ASR induced expansions are relaxed by meso-scale creep driven by self-equilibriated stresses at the meso-scale. This explains and highlights the importance of considering ASR and other time dependent aging and deterioration phenomena at an appropriate length scale in coupled modeling approaches.

: The article examines the regularities of structure formation of ultrafine fibers based on poly-3-hydroxybutyrat under the influence of technological (electrical conductivity, viscosity), molecular (molecular weight), and external factors (low-molecular and nanodispersed substances of different chemical nature). Systems with polar substances are characterized by the presence of intermolecular interactions and the formation of a more perfect crystalline fiber structure. Changes in technological and molecular characteristics affect the fiber formation process, resulting in alterations in the morphology of the non-woven fabric, fiber geometry, and supramolecular fiber structure. Polymer molecular weight, electrical conductivity, and solution viscosity influence fiber formation and fiber diameter. The fiber structure is heterogeneous, consisting of both crystalline and non-equilibrium amorphous phases. This is significant in the development of matrix-fibrillar systems for drug delivery, bioactive substances, antiseptics, tissue engineering constructs, tissue engineering scaffolds, artificial biodegradable implants, sorbents, and other applications.

This review paper presents a comprehensive synthesis of current knowledge on the contamination of water systems by polycyclic aromatic hydrocarbons (PAHs). PAHs, organic contaminants characterized by two or more fused aromatic rings, are notably problematic due to their persistence, bioaccumulation, and significant health risks. The review commences with an examination of various sources of PAHs in aquatic environments, encompassing both anthropogenic activities, such as industrial discharges, urban runoff, and oil spills, and natural phenomena including volcanic eruptions and wildfires. Subsequently, the discussion shifts to the distribution patterns of PAHs within different aquatic ecosystems, with an analysis of factors that influence their transport. Considerable focus is placed on the entry mechanisms of PAHs into water systems and their interactions with diverse environmental matrices. Additionally, the ecotoxicological effects of PAHs on aquatic life are scrutinized, with particular emphasis on molecular, individual, and ecosystemic impacts. This includes an exploration of PAH bioaccumulation in aquatic organisms and their potential mutagenic and carcinogenic consequences. The review further addresses the challenges associated with detecting and quantifying PAHs in aquatic settings, reflecting on the advancements in analytical methodologies and the complexities introduced by their varied physicochemical properties. The paper concludes with a summary of existing regulatory frameworks and guidelines governing PAH contamination in water systems, underscoring the imperative for global collaboration in the monitoring and management of PAH pollution.

Understanding aspects of maritime/underwater cultural heritage (MUCH) and the associated cultural values and integrating them into maritime spatial planning (MSP) endeavors, is a new global challenge, alongside the rapid increase of human activities at sea and climate change impacts on the seas and the oceans. The article highlights the significance of cultural values in shaping human interactions with the marine environments, and how MSP can address the cultural dimensions of marine resources management. To this end, a systematic literature review was carried out to address the research question on how maritime/underwater cultural heritage is incorporated into MSP and map relevant academic literature. Following, a methodology that entailed an academic database search and the application of exclusion criteria, 346 articles resulted from Scopus. These articles were classified using science mapping techniques (i.e the VOSviewer Software ) and several categories (clusters) were created. The research showed a diversity of literature addressing the relationship between MUCH and MSP with a strong focus on sustainability, the significance of cultural ecosystem services (CES) and cultural values, the role of indigenous and local communities, but also of local stakeholders, the transfer of traditional knowledge to MSP and the participatory approaches and tools. The article concludes that for MSPlans to be innovative and acceptable by local communities, the “missing layer”of socio-cultural values and data is indispensable. In the MSP process, MUCH should be understood within this broader framework of socio-cultural considerations and values.

Weaning is a critical period in the pig’s life. Piglets are confronted with abrupt changes to their physical and social environment, as well as management and nutritional changes. Weaning was always associated with a growth check and was frequently accompanied by post-weaning diarrhea in piglets. However, rapid increases in litter size, in the last decade, has increased within-litter piglet weight variation, with piglets now generally lighter at weaning, making the challenges associated with weaning even greater. Many interventions can be employed during the suckling period to ease the weaning transition for piglets. Pre-weaning strategies such as supervised farrowing (assistance with suckling, oxytocin provision), provision of pain relief to sows around farrowing, split-suckling, early oral supplementation with glucose, bovine colostrum, fecal microbiota transplantation, feed additives, solid and liquid creep feeding (milk and liquid feed) have all been investigated. The objective of these strategies is to stimulate earlier maturation of the digestive tract, improve immunity, reduce latency to the first feed post-weaning and increase early post-weaning feed intake and growth. This review focuses in particular on: 1) pain relief provision to sows around farrowing, 2) split-suckling of piglets, 3) pre-weaning provision of supplementary milk and/or liquid feed, 4) other strategies to stimulate earlier enzyme production (e.g. enzyme supplementation) and 5) other nutritional strategies to promote improved gut structure and function (e.g. L-glutamine supplementation). Correctly implementing these strategies can not only increase post-weaning growth and reduce mortality but also maximize lifetime growth in pigs.

Introduction: Given increasing adult use of amphetamine and methylphenidate and their high misuse potential, we examined suspected suicide attempts and other intentional misuse and medical outcomes and their associations with co-used other substances among amphetamine and methylphenidate exposure cases age 50+.Methods: Using the 2015-2021 U.S. National Poison Data System (N=7,701 amphetamine and/or methylphenidate cases), we fit two generalized linear models for a Poisson distribution with log link function, with suspected suicide attempt versus intentional misuse and major medical effect/death versus other outcomes as the dependent variables. Results: Of all amphetamine/methylphenidate exposure cases, suspected suicide attempts and intentional misuse were 28.4% and 13.2%, respectively. Benzodiazepine use was associated with a higher likelihood but any illicit drug use was associated with a lower likelihood of suspected suicide attempts compared to intentional misuse. Type of stimulant involved (amphetamine or methylphenidate) was not significant. Co-use of antidepressants (IRR=1.43, 95% CI=1.16-1.76), prescription opioids (IRR=1.48, 95% CI=1.21-1.81), drugs for cardiovascular disease (IRR=1.51 95% CI=1.20-1.90), antipsychotics (IRR=1.26, 95% CI=1.02-1.55), or illicit drugs (IRR=2.40, 95% CI=1.82-3.15) was associated with a higher likelihood of major effect/death.Conclusions: Suspected suicide attempts or intentional misuse accounted for more than 40% of amphetamine or methylphenidate exposure cases age 50+. The higher likelihood of major effect/death in cases involving antidepressants, antipsychotics, and cardiovascular disease drugs also suggests confounding effects of comorbid mental and physical health problems. Careful monitoring of those who were prescribed amphetamine or methylphenidate and use other substances are needed.

Alcohol effects on hepatic lipid metabolism through various mechanisms, leading synergistically to an accumulation of fatty acids (FA) and triglycerides. Obesity, as well as, the dietary fat [saturated fatty acids (FA) versus poly-unsaturated fatty acids (PUFA)] may modulate the hepatic fat. Alcohol inhibits adenosine monophosphate activated kinase (AMPK). AMPK activates peroxisome proliferators activated receptor a (PPARα) and leads to a decreased activation of sterol regulatory element binding protein 1c (SRABP1c). The inhibition of AMPK, and thus of PPARα results in an inhibition of FAs oxidation. This ß-oxidation is further reduced due to mitochondrial damage induced through cytochrome P4502E1 (CYP2E1) driven oxidative stress. Furthermore, the synthesis of FAs is stimulated through an activation of SHREP1. In addition, alcohol consumption leads to a reduced production of adiponectin in adipocytes due to oxidative stress and to an increased mobilization of FAs from adipose tissue and from the gut as chylomicrons. On the other side, the secretion of FAs via very low density lipoproteins (VLDL) from the liver is inhibited by alcohol. Alcohol also affects signal pathways such as early growth response 1 (Egr-1) associated with the expression of tumour necrosis factor  (TNF), and the mammalian target of rapamycin (mTOR) a key regulator of autophagy. Both have influence the pathogenesis of alcoholic fatty liver. Alcohol-induced gut dysbiosis is contributing to the severity of ALD by increasing metabolism of ethanol in the gut and promoting intestinal dysfunction. Moreover, pathogen associated molecular paterns (PAMPS) via specific Toll-like receptors (TLR) bacterial overgrowth is leading to the translocation of bacteria. Endotoxins, and toxic ethanol metabolites enter the enterohepatic circulation reaching the liver, inducing the activation of the nuclear factor kappa-B (NFB) pathway. Pro-inflammatory cytokines released in the process contribute to inflammation and fibrosis. In addition, cellular apoptosis is inhibited in the favor of necrosis.

Environmental degradation is one of the most visible problems in Hargeisa. Currently, solid waste is disposed of at two dumping sites within the city limits causing nuisance and unsanitary conditions. Moreover, the existing dumpsites are on the verge of closure, therefore necessitating a dire need to be addressed. This research paper is aimed to integrate multicriteria decision analysis and GIS for evaluating the site suitability for the landfill in Hargeisa, Somaliland. For this purpose, eleven significant parameters were selected: proximity from built-up areas, surface water, groundwater well points, sensitive sites (Airports), land use/land cover, geology, soil type, elevation, slopes, roads, and distance to existing dumpsites. These were then integrated using an analytical hierarchy process (AHP). Subsequently, restriction buffer analysis was performed on the seven parameters to obtain better and more accurate results, and restricted zones were omitted. Furthermore, the pair-wise comparison used to obtain priorities between the selected criteria showed that the land uses land cover is the most significant criterion in the model with a relative weight of 0.1829, followed by the habitations, 0.1506. The overall result reveals that about 68.96% (21060.9 ha) of the study area is unsuitable, while 24.36% (7441.53 ha) and 6.68% accounted for the less and highly appropriate zone, respectively. Following the results of this study, Hargeisa City's municipal council must reconsider the waste management and landfill sites to solve the problems observed in the area before it is overdue. Furthermore, this systematic research approach will assist regional and global researchers, policymakers, and municipal governments.

We explore, for the first time in the literature, how the revenues of the ship-management companies respond to macroeconomic exogenous shocks. Using data for ship-management companies in Cyprus, we find evidence that a demand shock has the largest impact on revenues, exhibiting an almost one-for-one relationship. If the demand shock is permanent, we observe a ceteris paribus permanent effect on revenues. Similarly, this occurs irrespective of the final effect that demand has on the relevant freight rate, proxied via the Baltic dry and tanker (dirty and clean) indices. The BDI and the BDTI indices have smaller effect on revenues, standing at approximately 0.05% for every 1% shock, while the clean tanker index does not have an effect, most likely due to their fleet composition. In accordance with the literature, we find that a shock in the price of Brent oil increases revenues. Our results bear importance not only for ship-management companies per se, but also for countries that are ship-management hubs.

Valley fever or coccidioidomycosis is a pulmonary infection caused by several species of coccidi-oides (Cocci) fungi that is endemic to California and Arizona. Skeletal coccidioidomycosis ac-counts for about half of disseminated infections, with the vertebral spine being the preferred site of dissemination. Most cases of skeletal coccidioidomycosis progress to bone destruction or spread to adjacent structures such as joints, tendons, and other soft tissues causing significant pain and restricting mobility. Manifestations of such cases are usually non-specific, making di-agnosis very challenging, especially in non-endemic areas. In this review, we explore case reports of dissemination of coccidioidomycosis to bones and/or joints to highlight key differential fea-tures with other conditions or diseases and highlight opportunities for mechanistic and pre-clinical studies that can help improve diagnostics, prognostics, and treatments.

This paper develops the study of the effect of powerful ultrasound on the laser breakdown of liquids and a comparative study of the possibilities of acoustic and optical diagnostics of breakdown. The method of laser-induced breakdown spectroscopy (LIBS) for elemental analysis of liquids, along with high efficiency, continues to be less sensitive compared to traditional chemical methods. The paper develops a method of using additional ultrasound irradiation of the laser breakdown area in order to increase the efficiency of LIBS. Using the developed technique, spectral lines of chemical elements such as potassium, manganese, sodium, calcium, etc. were obtained for the first time depending on the frequency and power of ultrasound. It is shown that a sharp increase in the intensity of spectral lines of elements in water during laser breakdown is observed in the field of high-power ultrasound. It indicates an increase in the sensitivity of the combined method of ultrasonic LIBS. Along with the optical spectrum, the spectral and energy characteristics of acoustic emission were studied. An automated complex for hydrophysical and spectral studies is described, which was tested in the Sea of Japan during the voyage No. 81 of the research vessel RV "Professor Gagarinsky" in August 2022.

Since its introduction, back in the late 1970s, the non-affine or slip parameter, ξ, has been routinely employed by numerous constitutive models as a constant parameter. However, the evidence seems to imply that it should be a function of polymer deformation. In the present work, we phenomenologically modify a constitutive model for the rheology of unentangled polymer melts [P. S. Stephanou et al. J. Rheol. 53, 309 (2009)] to account for a non-constant slip parameter. The revised model predictions are compared against newly accumulated rheological data for a C48 polyethylene melt obtained via direct non-equilibrium molecular dynamics simulations in shear. We find that the conformation tensor data are very well predicted; however, the predictions of the material functions are noted to deviate from the NEMD data, especially at large shear rates.

Molecular mimicry between human and microbial/viral/parasite peptides is common and for a long time is associated with the etiology of autoimmune disorders provoked by exogenous pathogens. Increasing evidence accumulated from the past years suggests a strong correlation between the SARS-CoV-2 infection and autoimmunity. The article analyzes the immunogenic potential of the peptides shared between SARS-CoV-2 spike glycoprotein (S-protein and antigens of human endocrinocytes involved in most common autoimmune endocrinopathies. Totally the study revealed 14 pentapeptides shared by S-protein of SARS-CoV-2 and autoantigens of thyroid, pituitary, adrenal cortex and Langerhans’ islets beta-cells, 12 of them belong to immunoreactive epitopes of SARS-CoV-2. The discussion of the data links the results with clinical correlates of COVID-associated autoimmune endocrinopathies. Most common of them is an autoimmune thyroid disease, so the majority of shared pentapeptides belong to marker autoantigens of this disease. Most important in pathogenesis of severe COVID-19, according authors’ opinion, can be autoimmunity against adrenals, because their adequate response prevents from excessive systemic action of inflammatory mediators which cause cytokine storm and hemodynamic shock. The criticism of antigen mimicry concept is given with a statement that peptide sharing is not a guarantee, but just a prerequisite of autoimmunity excess provocation. The last event occurs in carriers of certain HLA haplotypes and in case when shared peptide is used in antigen processing only [1 figure, 5 tables, bibliography 38 references].

The Musa textilis var. Abuab has high fiber quality (FQ) but has low resistance against abaca bunchy top virus (AbBTV); the Musa balbisiana var. Pacol, has low FQ but high resistance against AbBTV. Their backcrosses (BC2 and BC3) possess both desirable traits. Analysis using RNA-seq showed that the regulatory divergence of Abuab and Pacol is largely explained by cis differences with 27.4% and 22.3% if we are to assess it using BC2 and BC3, respectively. Cis differences between the two genotypes are significantly reduced from BC2 to BC3 due to changes in genomic constitution. Trans, on the other hand, is robust to changes in allelic composition. All these are attributed to the loss of heterozygosity in the BC3 relative to BC2. Further analysis showed that both backcrosses exhibited genome-wide preferential expression of Pacol- over Abuab-specific alleles, despite the wider genetic presence of the latter in the hybrids. The ratio of the two genotype-specific expressed transcripts and the ratio of their corresponding genetic make-up are significantly disproportionate, a phenomenon which we refer here as “genome–transcriptome incongruence”. We also observed preferential expression switching in which several genes prefer Abuab- (or Pacol-) specific allele in the BC2 but switched to Pacol- (or Abuab-) specific allele in the BC3 genome.

Current dry powder formulations for inhalation deposit a large fraction of their emitted dose in the upper respiratory tract where they contribute to off-target adverse effects and variability in lung delivery. The purpose of current study is to design a new formulation concept that more effectively targets inhaled dry powders to the large and small airways. The formulations are based on adhesive mixtures of drug nanoparticles and nanoleucine carrier particles prepared by spray drying of a co-suspension of leucine and drug particles from a nonsolvent. The physicochemical and aerosol properties of the resulting formulations are presented. The formulations achieve 93% lung delivery in the Alberta Idealized Throat model that is independent of inspiratory flow rate and relative humidity. Largely eliminating URT deposition with a particle size larger than solution pMDIs is expected to improve delivery to the large and small airways, while minimizing alveolar deposition and particle exhalation.

The main objective of this communication is to describe the ‘Global Salt Cycle’. Giant salt accumulations are commonly found along continental margins of former rifts. The first stage in the accumulation process is saturation of newly formed oceanic crust with seawater. Final mobilisation and accumulation of the salts occurs during rifting, localised in the vicinity of relict subduction zones. Oceanic crust is created along the spreading ridges in the deep oceans of the Earth. It exchanges mass and energy with seawater in hydrothermal circulation cells that penetrate deep into the new and fractured crust. Water-rock interactions include the formation of hydrated and hydroxylated minerals, e.g., serpentinites and clay minerals. By incorporating hydroxyl groups and water in their crystal lattices, the salinity of remaining brines increases. Subduction of oceanic crust and serpentinised lithosphere transports water, hydrated minerals, and marine salts deep into the crust and mantle. Upon pressurisation and heating of the subducting slab, different parts of this water are expelled at different depths/temperatures. The resulting fluids will contain salts brought in with the slab, as well as new salts formed by water-rock interaction. The combination of elevated pressures and temperatures, water, salinity, and CO2, create permeability in the normally impermeable, peridotitic mantle, by altering the fluid-rock dihedral angles of mineral grains. This P/T-determined intergranular permeability allows ascent of saline fluids, under lithostatic pressure, within the mantle wedge, or the slab itself. The fluids produce a mechanically weakened and buoyant zone within the mantle wedge due to high pore pressure between mineral grains and reduced mantle density. During the lifetime of a subduction zone, a substantial accumulation of saline fluids within the mantle wedge and crust, is evident. Deep, fluid reservoirs accumulate between the subduction trench and the volcanic front. They may exist for hundreds of millions of years, even after the extinction of the subduction zone. Saline fluids may escape to the surface along deep faults, due to overfilling of available pores/fractures. Fluids within the mantle wedge may form rock melts or exist as supercritical, mineral rich fluids. The combination of reduced pressure due to rifting, and a saline and buoyant mantle, creates a mantle circulation that brings the accumulated, saline fluids, to crustal levels. Salts will therefore accumulate during initial stages of rifting as a result of massive fluid expulsion, phase change and boiling of mantle fluids. No extra energy is required to produce phase change and boiling. The result is formation of solid salts or dense brines/slurries invading fractured crustal rocks, or escaping to the surface/seabed. This process may take place both before and after the sea has invaded a continental rift.

The study of the development of the vertebrate retina can be addressed from several perspectives: from purely qualitative to a more quantitative approach that takes into account its spatiotemporal features, its three dimensional structure and also the regulation and properties at the systems level. Here we review the ongoing transition towards a full four-dimensional characterization of the developing vertebrate retina, focusing on the challenges at the experimental, image acquisition, image processing and quantification. Using the developing zebrafish retina, we illustrate how quantitative data extracted from these type of highly dense three-dimensional tissues depends strongly on the image quality, image processing and algorithms used to segment and quantify. Therefore, we propose that the scientific community that focuses on developmental systems could strongly benefit from a more detailed disclosure of the tools and pipelines used to process and analyze images from biological samples.

Emotion recognition is becoming very relevant in educational scenarios, since previous research has proven the strong influence of emotions on the student's engagement and motivation. There is no standard method for stating student's affect, but physiological signals have been widely used in educational contexts. Physiological signals have been proved to offer high accuracy in detecting emotions because they reflect spontaneous affect-related information, and which is fresh and do not require an additional control or interpretation. However, most proposed works use measuring equipment that limit its applicability in real-world scenarios because of their high cost and their intrusiveness. Expensive material means an economic challenge for schools and reduce the scalability of the experiments. Intrusive equipment can be uncomfortable for the students which can lead to errors in the collected data. In this work, we analyse the feasibility of developing a low-cost non-intrusive device that integrates easy-to-capture signals that guarantee high detection accuracy. The advantage of the approach also lies in using user’s centred information sources (intra-subject) in real-world situations, which provide better detection accuracy, by offering models adapted to each subject. To this end, we present an experimental study that aims to explore the potential application of Hidden Markov Models (HMM) to predict the concentration state from 4 commonly used physiological signals, namely heart rate, breath rate, skin conductance and skin temperature. We study the multi-fusion of every possible combination of these four signals and analyse their potential use in an educational context in terms of intrusiveness, cost and accuracy. Results show that a high accuracy can be achieved with three of the signals when using HMM-based intra-subject models. However, inter-subject models, which are meant to obtain subject-independent approaches for affect detection, fail at the same task. This work concludes that the implementation of a low-cost wrist-worn device for recognising relevant emotions from each student is possible and open the way to a wide range of practical applications in the context of adaptive learning systems.

More people are surviving longer with cancer. Whilst this can be partially attributed to advances in early detection of cancers, there is little doubt that the improvement in survival statistics is also due to the expansion in the spectrum of treatments available for efficacious treatment. Transformative amongst those are immunotherapies, which have proven effective agents for treating immunogenic forms of cancer, though immunologically “cold” tumour types remain refractive. Oncolytic viruses, such as those based on adenovirus have great potential as anti-cancer agents and have seen a resurgence of interest in recent years. Amongst their many advantages is their ability to induce immunogenic cell death (ICD) of infected tumour cells, thus providing the alluring potential to synergize with immunotherapies by turning immunologically “cold” tumours “hot”. Additionally, enhanced immune mediated cell killing can be promoted through the local overexpression of immunological transgenes, encoded from within the engineered viral genome. To achieve this full potential requires the development of refined, tumour selective “precision virotherapies” that are extensively engineered to prevent off-target up take via native routes of infection, and targeted to infect and replicate uniquely within malignantly transformed cells. Here, we review the latest advances towards this holy grail within the adenoviral field.

Pathogens and adulterants in human feeding consumables can be readily identified according to their electrical properties. Electrical bioimpedance analysis (BIA) has been widely used for body contents characterization, such as blood, urine, lactate and sweat. If the blood glucose concentration alters the electrical properties of the blood medium, then the impedance spectrum obtained by BIA can be used to measure glycemia. In some applications, artificial neural networks allows the correlation of these parameters (impedance and glucose concentration) by means of symbolic and statistical rules. According to our literature review, there is any physical model that allows the interpretation of the relationship between blood’s electrical properties, obtained by BIA, and the concentration of glucose in the blood plasma. This article proposes a simplified physical model for blood electrical conductivity as a function of glucose concentration, based on Bruggeman’s effective medium theory. The equations of this model were obtained considering an insulating phase distribution diffused in a conductive matrix, in which red blood cells are represented by macroscopic insulating nuclei and glucose molecules by microscopic insulating particles. The impedance spectrum for different glucose concentrations (4.0 to 6.8 mmol/L) in a blood sample, published by Kamat Bagul (2014), were compared with the proposed model. The results showed a significant correlation with the experimental data, showing a maximum error of 5.2%. The proposed model might be useful in the design of noninvasive blood glucose monitoring systems.

A recent taxonomic study confirmed the synonymy of Rhodococcus equi (Magnusson 1923) Goodfellow and Alderson 1977 and Corynebacterium hoagii (Morse 1912) Eberson 1918. As a result, both R. equi and C. hoagii were reclassified to Rhodococcus hoagii comb. nov. in application of the principle of priority of the Prokaryotic Code. Being R. equi a well-known animal and zoonotic human pathogen, and the name solidly established in the veterinary and medical literature, we and others argued that the nomenclatural change may cause error and confusion and be potentially perilous. We have now additionally found that the nomenclatural type of the basonym C. hoagii, ATCC 7005^T, does not correspond with the original description of C. hoagii in the early literature. Its inclusion as the C. hoagii type on the Approved Lists 1980 results in a change in the characters of the taxon and in C. hoagii clearly designating two different bacteria. Moreover, ATCC 7005, the only strain in circulation under the name C. hoagii, does not have a well documented history; it is unclear why it was deposited as C. hoagii and a possible mixup with a Corynebacterium (Rhodococcus) equi isolate is a reasonable assumption. We therefore request the rejection of Rhodococcus hoagii as a nomen ambiguum, nomen dubium and nomen perplexum in addition to nomen periculosum, and conservation of the name Rhodococcus equi, according to Rules 56ab of the Code.

Chemical processing of organic material in aqueous atmospheric aerosols and cloudwater is known to form secondary organic aerosols (SOA), although the extent to which each of these processes contributes to total aerosol mass is unclear. In this study, we use GAMMA 5.0, a photochemical box model with coupled gas and aqueous-phase chemistry, to consider the impact of aqueous organic reactions in both aqueous aerosols and clouds on isoprene epoxydiol (IEPOX) SOA over a range of pH for both aqueous phases, including cycling between cloud and aerosol within a single simulation. Low-pH aqueous aerosol, in the absence of organic coatings or other morphology which may limit uptake of IEPOX, is found to be an efficient source of IEPOX SOA, consistent with previous work. Cloudwater at pH 4 or lower is also found to be a potentially significant source of IEPOX SOA. This phenomenon is primarily attributed to the relatively high uptake of IEPOX to clouds as a result of higher water content in clouds as compared to aerosol. For more acidic cloudwater, the aqueous organic material is comprised primarily of IEPOX SOA and lower-volatility organic acids. For both cloudwater and aqueous aerosol, pH is the most significant factor considered in this study in determining the mass of aqueous phase organic acids and IEPOX SOA. Other factors, such as the time of day or sequence of aerosol-to-cloud or cloud-to-aerosol transitions, contribute to less than 15% difference in the final aqSOA fractional composition. The potential significance of cloud processing as a contributor to IEPOX SOA production could account for discrepancies between predicted IEPOX SOA mass from atmospheric models and measured ambient IEPOX SOA mass, or observations of IEPOX SOA in locations where mass transfer limitations are expected in aerosol particles.

Spatially resolved, line-of-sight measurements of aluminum monoxide emission spectra in laser ablation plasma are used with Abel inversion techniques to extract radial plasma temperatures. Contour mapping of the radially deconvolved signal intensity shows a ring of AlO formation near the plasma boundary with the ambient atmosphere. Simulations of the molecular spectra were coupled with the line profile fitting routines. Temperature results are presented with simultaneous inferences from lateral, asymmetric radial, and symmetric radial AlO spectral intensity profiles. This analysis indicates that we measured shockwave phenomena in the radial profiles, including a temperature drop behind the blast wave created during plasma initiation.

Abstract: Aedes aegypti were exposed to water treated with mosquitocidal chips containing the insecticide pyriproxyfen in a polymer formulation. Chips were tested under different conditions; different water volumes, in containers made of different material, and in water with different levels of organic matter. Treated chips caused 100% mortality of Ae. aegypti during their pupal stage independent of conditions chips were exposed to in water. When tested for longevity, the chips containing 840 µg of pyriproxyfen killed 100% of Ae. aegypti for 4 sequential months of the chips being reused in water. Chips containing 8.4 µg of pyriproxyfen ceased to work after the first week of treatment. When mosquitocidal chips were used in > 25% of the oviposition containers within their cages, there was a significant control of the mosquito populations. Mosquitocidal chips worked in different environments, lasted for extended periods of time, caused significant mosquito population decreases, and were effective in controlling Ae. Aegypti.

Current paper investigates the influence of hardware setup and parameters of a 3D printing process based on fused filament fabrication (FFF) technology on resulting sample strength. Three-point bending of samples printed with long side oriented along Z axis was used as a measure of the interlayer bonding strength. The same CAD model was converted into NC-programs through same slicing software to be run on four different desktop FFF 3D printers, out of filament of same brand and color. Within all the printers same ranges of layer thickness values from 0.1 to 0.3 mm and feed rates from 25 to 75 mm/s were planned to be varied. All the machines demonstrated statistically almost identical values of maximum flexural strength, however the different machines exhibited maximum sample strength with different combinations of varied parameters. Among all the hardware factors observed, the most important was proved to be extruder type, direct or Bowden. This feature fundamentally changes the nature of studied parameters influence onto the resulting strength of the FFF process. For the extruders of Bowden type the length of flexible guiding tube is of great importance.All the machines demonstrated statistically almost identical values of maximum flexural strength, however the different machines exhibited maximum sample strength with different combinations of varied parameters. Among all the hardware factors observed, the most important was proved to be extruder type, direct or Bowden. This feature fundamentally changes the nature of studied parameters influence onto the resulting strength of the FFF process. For the extruders of Bowden type the length of flexible guiding tube is of great importance.

In financial time series modelling and forecasting, combining ARMA and GARCH models tend to produce superior and reliable models for volatility persistence, half-life volatility and backtesting (application of model in real life). In Nigeria, banking stocks are mostly traded because of its potential benefits to investors. This study modelled and forecasted the Guaranty Trust (GT) Bank daily stock returns from January 2^nd 2001 to May 8^th 2017 data set collected from a secondary source. The ARMA-GARCH models, persistence, half-life and backtesting were used to analysed the collected data using student t and skewed student t distributions, and the analyses are carried out R environment using rugard and performanceAnaytics Packages. The study revealed that using the lowest information criteria values only could be misleading rather we added the use of backtesing. The ARMA(1,1)-GARCH(1,1) models fitted exhibited high persistency in the daily stock returns while the days it takes for mean-reverting of the models ranges from 5 days to 100 days but unfortunately the models failed backtesting. The results further revealed ARMA(1,1)-eGARCH (2,2) model with student t distribution provides a suitable model for evaluating the GT bank stock returns among the competing models while it takes less than 30 days for the persistence volatility to return back to its average value of the stock returns. This study recommended that researchers should adopt backtesting approach while fitting GARCH models while GT bank stocks investor should be assured that no matter the fluctuations in the stock market, the GT bank stock returns has the ability to returns to its mean price return.

Among the most important variables in the design of falling film microreactors (FFMRs) is the liquid film thickness as well as the gas/liquid interfacial area, which dictate the mass and heat transfer rates. In a previous work conducted in our lab the characteristics of a free-falling Newtonian liquid film have been studied and appropriate correlations have been proposed. In this work the geometrical characteristics of a non-Newtonian shear thinning liquid, flowing in an inclined open microchannel, have been experimentally investigated and design correlations that can predict with reasonable accuracy the features of a FFMR have been proposed. The test section used was an open μ-channel with square cross section (Wo=1200 μm) made of brass which can be set to various inclination angles. The liquid film characteristics were measured by a non-intrusive technique that is based on the features of a μ-PIV system. Relevant CFD simulations revealed that the volume average dynamic viscosity over the flow domain is practically the same as the corresponding asymptotic viscosity value, which can thus be used in proposed the design equations. Finally, a generalized algorithm for the design of FFMRs, containing non-Newtonian shear thinning liquids, is suggested.

Total Nigeria Plc is a Marketing and Services subsidiary of Total; a multinational energy company operating in more than 130 countries and committed to providing sustainable products and services for its customers. For over 50 years, Total Nigeria Plc has remained the leader in the downstream sector of the Nigerian oil and gas industry. This study investigated the volatility of the stock price of Total Petroleum Nigeria plc using nine (9) GARCH models namely sGARCH, gjrGARCH, eGARCH, iGARCH, aPARCH, TGARCH, NGARCH, NAGARCH and AVGARCH. We also investigated the Value-at-Risk (VaR) and Backtesting of the Models. The aim actually of this study is to boost the confidence of the shareholders and investors of the Total Nigeria plc. To achieve this, daily stock price for Total petroleum Nigeria plc from secondary was collected from January 2^nd 2001 to May 8^th 2017. . The study used both normal and student t innovations, using Akaike Information Criterion (AIC) to select the best model, for normal innovations for log returns and cleansed log returns of Total plc, the eGARCH and sGARCH models performed best respectively, while NGARCH model performed best for student t innovation for both log returns and cleansed returns of Total plc. The persistence of the models are stable except in few cases where iGARCH, eGARCH where not stable. Also for student t innovation, the sGARCH and gjrGARCH fails to converge. The mean-reverting number of day for the returns of Total Nigeria plc differs from model to model. Evidence from the VaR Analysis revealed from the selected models revealed that the Risk of VaR losses is high at 99% confidence level, slightly high at 95% confidence level and better at 90% confidence level. Although The Duration-Based Tests of independence conducted revealed that the models are correctly specified since in all cases the null hypotheses were accepted. This means that the probability of an exception on any day did not depends on the outcome of the previous day. Finally, both the unconditional (Kupiec) and conditional (Christoffersen) coverage tests for the correct number of exceedances for both Total stock returns and cleansed returns. The tests revealed rejection of the models at 1% level of significance. This confirms that unconditional (Kupiec) and conditional (Christoffersen) coverage tests for the correct number of exceedances are reliable compared to the Duration-Based Tests of independence. Therefore we recommend that shareholders and investors in Total Nigeria plc are to remain and continue to investment in Total Nigeria plc because if there is any form of losses, the price of the stock has the potentials to improve in the future. Again, though the risk is high at 99% confidence level, this in line with the financial theory that states that an asset with high expected risk would pay higher return on the average.

It is a common practice to detect outliers in a financial time series in order to avoid the adverse effect of additive outliers. This paper investigated the performance of GARCH family models (sGARCH; gjrGARCH; iGARCH; TGARCH and NGARCH) in the presence of different sizes of outliers (small, medium and large) for different time series lengths (250, 500, 750, 1000, 1250 and 1500) using root mean square error (RMSE) and mean absolute error (MAE) to adjudge the models. In a simulation iteration of 1000 times in R environment using rugarch package, results revealed that for small size of outliers, irrespective of the length of time series, iGARCH dominated, for medium size of outliers, it was sGARCH and gjrGARCH that dominated irrespective of time series length, while for large size of outliers, irrespective of time series length, gjrGARCH dominated. The study further leveled that in the presence of additive outliers on time series analysis, both RMSE and MAE increased as the time series length increased.

Metabolomic analysis of biological fluids and tissues has become an increasingly routine tool in the biological toolbox. However, challenges remain to be overcome, including developing strategies to maximise coverage of the metabolome without requiring large sample volumes. Here we describe a multimodal strategy that combines data using both LC-MS and GC-MS from a unique vial with a sample of plasma (20µl) or a sample of brain tissue (3mg). Using a split phase extraction the non-aqueous phase was analyzed by reversed phase (RP) LC-MS, whilst the aqueous phase was analyzed using hydrophilic liquid interaction chromatography (HILIC)LC-MS, with both phases also analysed using GC-MS after derivatization of the extract. Analytical performance was assessed in 7 rat cerebellum samples and a pilot study of 40 plasma samples (20 vs. 20: AD vs. healthy controls). The method, which uses four hours of instrument time, measured 20,707 metabolite features in brain samples and 17,266 in plasma samples, from those 44.1% features displayed CV’s below 15% and 75.2% below 30%. The method has potential to resolve subtle biological differences and to correlate metabolite composition directly to clinical outcomes including MMSE, age and ADCS-ADL. This method can acquire in the order of 20K metabolic features when low volumes are available.

Neisseria meningitidis (N. meningitidis) serogroup B (MenB) is the leading cause of invasive meningococcal disease worldwide. The pathogen has a wide range of virulence factors, which are potential vaccine components. Studying the genetic variability of antigens within a population, especially their long-term persistence, is necessary to develop new vaccines and predict the effectiveness of existing ones. The multicomponent 4CMenB vaccine (Bexsero), used since 2014, contains three major genome-derived recombinant proteins: factor H-binding protein (fHbp), Neisserial Heparin-Binding Antigen (NHBA) and Neisserial adhesin A (NadA). Here, we assessed the prevalence and sequence variations of these vaccine antigens in a panel of 5667 meningococcal isolates collected worldwide over the past 10 years and deposited in the PubMLST database. Using multiple amino acid sequence alignments and machine learning methods, we estimated the potential strain coverage by fHbp and NHBA vaccine variants (51 and about 30%, respectively); the NadA antigen sequence was found in only 17.8% of MenB genomes analyzed, but cross-reactive variants were present in less than 1% of isolates. Based on our findings, we proposed various strategies to improve the 4CMenB vaccine and broaden coverage of N. meningitidis strains.

Advances in sequencing technologies and bioinformatics have greatly enhanced our knowledge of virus biodiversity. Currently, viromes of haematophagous invertebrates, such as mosquitoes and ixodid ticks, are actively studied. Tabanidae (Diptera) is a widespread family, with members mostly known for their persistent haematophagous behavior. They transmit viral, bacterial and other pathogens, both biologically and mechanically. However, tabanid viromes remain severely understudied. In this study, we used high-throughput sequencing to describe the viromes of several species of Hybomitra, Tabanus, Chrysops, and Haematopota genera, which were collected in Russia. We assembled 14 full coding genomes of the novel viruses, 4 partial coding genomes, as well as several fragmented viral sequences, which presumably belong to another 12 new viruses. All the discovered viruses were tested on their ability to replicate in the mammalian porcine embryo kidney (PEK), tick HAE/CTVM8, and mosquito C6/36 cell lines. In total, 16 viruses were detected in at least one cell culture after three passages (for PEK and C6/36) or 3 weeks of persistence in HAE/CTVM8. However, in the majority of cases, qPCR showed a decline in virus load over time. Nevertheless, four viruses were detected after six passages.

The control of air quality in museums or storages is of fundamental interest for the conservation of historic artifacts. The present work reports an example of application of RFID sensors developed in the European project SensMat and dedicated to this issue. The sensors are based on the varia-tion of property of an RFID tag coupled to a sensitive silver thin film exposed to the environment. As it will be described in the paper, such low cost sensors are interrogated by a commercial reader and provide the environmental corrosivity index and thus the presence of pollutants. The selected case study concerns the monitoring of pollution by H2S in a building dedicated to conservation and restoration of archeological and historical woods. The ability of sensors to map spatially the corrosivity within buildings is highlighted.

Background: Current management of COPD is predominantly focused on respiratory aspects. A multidimensional assessment including nutritional assessment, quality of life and disability provides a more reliable perspective of the true complexity of COPD patients. Methods: Prospective observational study of 120 elderly COPD patients at high risk of acute exacerbations. The Mini-Nutritional Assessment (MNA) was administered in addition to the usual respiratory assessment. The primary outcome was a composite of moderate or severe acute exacerbations during 52 weeks of follow-up. Results: The median MNA Short Form (SF) score was 11 (8-12), 39 participants (32.50%) had normal nutritional status, 57 (47.5%) were at risk of malnutrition and 24 (20%) were malnourished. Our multivariate linear logistic models showed that the MNA score was associated with dyspnea and respiratory symptoms severity assessed by the Modified British Medical Research Council (mMRC) and the COPD Assessment Test (CAT) score, with spirometric variables, in particular with the severity of airflow limitation based on the value of FEV1 and with poorer QoL as assessed by the EQ-5D-3 questionnaire. Cox regression analysis according to nutritional status based on the MNA score showed that COPD participants "at risk of malnutrition" and "malnourished" had a higher risk of moderate to severe acute exacerbations with a hazard ratio (HR) of 3.54 (p=0.002) and 8.20 (p=0.0001), respectively. Conclusion: Our study confirms the importance of assessing nutritional status in elderly COPD patients and its prognostic value.

Recent studies have shown that the endogenous cannabinoid system (ECS) of the brain is essentially involved in the pathogenesis of Parkinson's disease (PD), influencing its symptoms by regulating the level of endogenous cannabinoids and altering the activation of cannabinoid receptors (CBR). Therefore, modulation of ECS with new drugs developed for this purpose may prove to be a promising strategy in the treatment of PD. However, fine regulation of ECS is quite a challenge due to the functional diversity of CBR in the basal ganglia. Our review analyses the effects of ECS modulators on experimental PD models and in patients with PD, as well as presents the outlooks for the development of new cannabinoid drugs for the treatment of motor and non-motor symptoms in PD.

Background: During esophagogastroduodenoscopy performed with colonoscopy, gastric and duodenal erythema, erosions, and ulcerations are often observed. This investigation was designed to review the prevalence of gastroduodenal lesions in patients who underwent wireless capsule endoscopy using standard bowel cleansing preparations, but no endoscopy or sedation. Methods: A retrospective analysis was conducted on patients referred for capsule endoscopy. Records and capsule reports were reviewed for patient demographics, preparation prescribed, procedural indications, and gastroduodenal findings. Preparations studied included polyethylene glycol lavage (PEG), PEG plus bisacodyl (PEG+bis), bisacodyl (bis), oral sulfate solution (OSS) and no prep. Results: Among the 1236 records, 498 (40.3%) were men and 738 (59.7%) were women. The mean age was 57 years +/- 17.8 years SD. The percentage of patients with lesions after any bowel preparation was 52.7% for gastric lesions and 23.6% for duodenal lesions. The percentage of patients with gastroduodenal lesions was 58.3% with prep, compared to 38.2% without prep. These findings were statistically significant with RR 1.53 [1.19-1.94] (p-value=0.00004). This difference was more pronounced in the OSS group RR 1.65 [1.29-2.1] and bisacodyl groups RR 1.64 [1.25-2.15] compared to the PEG group RR 0.95 [0.7-1.3]. Conclusion: This study showed that patients undergoing wireless capsule endoscopy who received bowel preparations had a significant increase in gastric and duodenal lesions. Of the preparations studied, OSS was associated with the greater number of gastroduodenal lesions, while PEG was the least associated with lesions with an occurrence similar to the non-prep group. The clinical significance of these lesions remains undetermined.

Saudi Arabia consists mainly of desert land. However, it has big and small natural wetlands and artificial wetlands. Most of these wetlands are seen along the Red Sea and the Arabian Gulf coastal regions. Al-Asfar Lake, located in the Eastern Region of Saudi Arabia, is one of the historical landmarks of Al-Ahsa province. The primary lake water source is agricultural drainage water, which some refer to as an artificial lake. This paper mainly aims to reflect shade on the wetlands in Saudi Arabia in general and to show in detail the environmental impacts of Al-Asfar Lake on the ecosystem and biodiversity of the study area. The analytical review of the previous studies conducted in Al-Asfar Lake was adopted in this article. Hence, the impact of the lake on the land-use system, water quality and biodiversity was illustrated as the main outputs of the review analysis. However, the sustainable management of Al-Asfar Lake requires the stakeholders to adopt the wetland ecosystem health concept, which might lead to improving the lake's environmental conditions.

This manuscript critically reviews the design and delivery of spray-dried particles for the achievement of high total lung doses (TLD) with a portable dry powder inhaler. We introduce a new metric termed the product density, which is simply the TLD of a drug divided by the volume of the receptacle it is contained within. The product density is given by the product of three terms: the packing density (the mass of powder divided by the volume of the receptacle), the drug loading (the mass of drug divided by the mass of powder), and the aerosol performance (the TLD divided by the mass of drug). This manuscript discusses strategies for maximizing each of these terms. Spray drying at low drying rates with small amounts of a shell-forming excipient (low Peclet Number) leads to formation of higher density particles with high packing densities. This enables ultrahigh TLD (>100 mg of drug) to be achieved from a single receptacle. Emptying of powder from capsules is directly proportional to the mass of powder in the receptacle, requiring an inhaled volume of about 1 L for fill masses between 40 and 50 mg and up to 3.2 L for a fill mass of 150 mg.

This study evaluated the antimicrobial activity of Leptospermum scoparium (Mānuka) and Cryptomeria japonica (Sugi) essential oils and assessed the effect of seasonal chemical variation on the oils’ antimicrobial efficacies. Plate based assays were conducted to elucidate the oils’ spectrum of in vitro antimicrobial activity and to determine the oils’ minimum inhibitory concentrations (MIC) as a measure of antimicrobial efficacy. Gas chromatography – mass spectrometry was adopted to chemically profile oils distilled in different seasons. The resultant compositional information in conjunction with MIC data was used to evaluate the effect of seasonal variation on the oils’ antimicrobial efficacy. Both Mānuka and Sugi essential oils were active against all classes of target microorganisms. However, limited activity was observed against Gram-negative bacteria. The oils displayed consistent chemotypic characteristics regardless of the time of distillation. Nonetheless, there were quantitative differences in compound abundance in both essential oils. Significant differences in the MIC of Sugi essential oil was observed against target microorganisms as a result of seasonal variation in constituent abundances while Mānuka essential oil’s antimicrobial efficacy was unaffected. This study demonstrates that seasonal chemical variation is an important quality assurance parameter to consider for future application of essential oils as antimicrobial agents in consumer products.

During the current COVID-19 pandemic caused by SARS-CoV-2, clinicians and scientists are working assiduously to unravel its pathophysiology and find effective treatments. An impressive number of papers has been published on SARS-CoV-2, exposing the complexity of the disease, the tendency of scientists to form hypotheses within their area of expertise, and the lack of orchestration of research. Hypotheses and research findings mainly complement each other, though sometimes controversies can be discerned among various theories and study results. Our overview aims to portray the ‘big picture’ of COVID-19, visualising the interwovenness of different pathophysiological pathways, with a focus on cytokine-induced pathology, the sequelae of ACE2 downregulation, and thrombosis associated with microvascular injury. It aids in overseeing the effects of repurposed drugs on intended targets, but also alerts to the (adverse) effects on interacting pathways. The overview shows how comorbidities probably increase susceptibility to (severe) COVID-19 and provides the possible pathophysiological origin of signs, symptoms, and biochemical abnormalities.

This research paper presents a new application of electroactive polyimide doped with gold nanoparticles (PI/AuNPs) as a chemiresistor sensor for detecting hydrogen sulfide gas. The synthesis of PI/AuNPs was done in a simple 3-step process of polymerization using the as prepared amine-capped aniline trimer (ACAT), followed by imidization, and doping. Spectral analyses via FTIR, LC-MS and ¹H-NMR confirmed the formation of amine-capped aniline trimer with a MW of 288 g mol^-1. Comparison of ACAT, BSAA, and PI FTIR spectra showed successful polymerization of the last, while XRD validated the incorporation of metal nanoparticles onto the polymer matrix showing characteristic diffraction peaks corresponding to gold. Furthermore, TEM, and FE-SEM revealed the presence of well-dispersed Au nanoparticles with an average diameter of about 60nm. The electroactive PI/AuNPs-based sensor showed a sensitivity of 0.29% ppm^-1 H₂S at a linear concentration range of 50 to 300 ppm H₂S (r = 0.9777). The theoretical limit of detection was found at 0.142 ppm or 142 ppb H₂S gas. The sensor provided a stable response reading at an average response time of 43±5 seconds, which was easily recovered after an average time of 99±5 seconds. The sensor response was highly repeatable and reversible with RSD values of 8.88%, and 8.60%, respectively. Compared with the performance of the conventional conducting polyaniline also doped with gold nanoparticles (PANI/AuNPs), the fabricated electroactive PI/AuNPs exhibited improved sensing performance making it a potential candidate in monitoring H₂S in the environment and for work-related safety.

Tuberculosis (TB) is the primary cause of death by a single infectious agent; responsible for around two million deaths in 2016. A major virulence factor of TB is the ability to enter a latent or Non-Replicating Persistent (NRP) state which is presumed untreatable. Approximately, 1.7 billion people are latently infected with TB and on reactivation many of these infections are drug resistant. As the current treatment is ineffective and diagnosis remains poor, millions of people have the potential to reactivate into active TB disease. The immune system seeks to control the TB infection by containing the bacteria in a granuloma, where it is exposed to stressful anaerobic and nutrient deprived conditions. It is thought to be these environmental conditions that trigger the NRP state. A number of in vitro models have been developed that mimic conditions within the granuloma to a lesser or greater extent. These different models have all been utilised for the research of different characteristics of NRP Mycobacterium tuberculosis, however their disparity in approach and physiological relevance often results in inconsistencies and a lack of consensus between studies. This review provides a summation of the different NRP models and a critical analysis of their respective advantages and disadvantages relating to their physiological relevance.

An emerging picture in cancer biology is that, paradoxically, chemotherapy can actively induce changes that favor cancer progression. These pro-cancer changes can be either inside (intrinsic) or outside (extrinsic) the cancer cells. In this review, we will discuss the extrinsic pro-cancer effect of chemotherapy; that is, the effect of chemotherapy on the non-cancer host cells to promote cancer progression. We will focus on metastasis, and will first discuss recent data from mouse models of breast cancer. Intriguingly, despite reducing the size of primary tumors, chemotherapy changes the tumor microenvironment, resulting in an increased escape of cancer cells into the blood stream. Furthermore, chemotherapry changes the tissue microenvironment at the distant sites, making it more hospitable to cancer cells upon their arrival. We will then discuss the idea and evidence that these devastating pro-metastatic effects of chemotherapy can be explained in the context of stress response. At the end, we will discuss the potential relevance of these mouse data to human breast cancer and their implication on chemotherapy in the clinic.

Leaf temperature (T_leaf) influences photosynthesis and respiration. Currently, there is a growing interest on including lianas in productivity models due to their increasing abundance, and their detrimental effects on net primary productivity in tropical environments. Therefore, understanding the differences of T_leaf between lianas and trees is important for future of forest on whole ecosystem productivity. Here we determined the displayed leaf temperature (T_d= T_leaf – ambient temperature) of several species of lianas and their host trees during ENSO and non-ENSO years to evaluate if the presence of lianas affects the T_d of their host trees, and if leaves of lianas and their host trees exhibit differences in T_d. Our results suggest that close to midday, the presence of lianas does not affect the T_d of their host trees; however, lianas tend to have higher values of T_d than their hosts across seasons, in both ENSO and non-ENSO years. Although lianas and trees tend to have similar physiological-temperature responses, differences in T_d could lead to significant differences in rates of photosynthesis and respiration based temperature response curves. Future models should thus consider differences in leaf temperature between these life forms to achieve robust predictions of productivity.

Computational fluid dynamics is used to study the impact of the support structure of a tidal turbine on performance and the downstream wake characteristics. A high-fidelity computational model of a dual rotor, contra-rotating tidal turbine in a large channel domain is presented, with turbulence modelled using large eddy simulation. Actuator lines represent the turbine blades, permitting the analysis of transient flow features and turbine diagnostics. The following four cases are considered: the flow in an unexploited, empty channel; flow in a channel containing the rotors; flow in a channel containing the support structure; and flow in a channel with both rotors and support structure. The results indicate that the support structure contributes significantly to the behaviour of the turbine and to turbulence levels downstream, even when the rotors are upstream. This implies that inclusion of the turbine structure, or some parametrisation thereof, is a prerequisite for the realistic prediction of turbine performance and reliability, particularly for array layouts where wake effects become significant.

Reducing the carbon footprint of energy production is one of the most pressing challenges facing humanity today. Lignocellulosic biomass residues from fruit production industries show promise as a viable energy source. This paper presents a study of the Italian context concerning the utilization of orchard lignocellulosic residues for energy production as electricity or bioethanol. The potential of various orchard residues was assessed through chemical and physical analysis, and an equivalent electrical energy of about 6441.62 GWh or an amount of 0.48 Mt/y of bioethanol was obtained based on the average annual dry residue mass availability of about 3.04 Mt/y. These data represent the 9.30% of the national electrical energy production from renewable sources, as well as the 6.21% of the Italian demand for gasoline in 2022. Electricity generation from these residues shown its potential as a reliable and sustainable baseload power source, as well as source of renewable transportation fuel. The studied process could be a valuable reference to expand these concepts on global scale to achieve a greener and more sustainable energy future.

As belonging to one of the most isolated continents on our planet, the microbial composition of different environments in Antarctica could hold a plethora of undiscovered species with potential for biotechnological applications. This manuscript delineates our discoveries after an expedition to the Bulgarian Antarctic Base "St. Kliment Ohridski" situated on Livingston Island, Antarctica. Amplicon-based metagenomics targeting the 16S rRNA genes and ITS2 region were employed to assess the metagenomes of the bacterial, fungal and archaeal communities across diverse sites within and proximal to the research station. The predominant bacterial assemblages identified included Oxyphotobacteria, Bacteroidia, Gammaprotobacteria and Alphaprotobacteria. A substantial proportion of cyanobacteria reads were attributed to a singular uncultured taxon within the family Leptolyngbyaceae. The bacterial profile of a lagoon near the base exhibited indications of penguin activity, characterized by a higher abundance of Clostridia, similar to lithotelm samples from Hannah Pt. Although most fungal reads in the samples could not be identified at the species level, noteworthy genera, namely Betamyces and Tetracladium, were identified. Archaeal abundance was negligible, with prevalent groups including Woesearchaeales, Nitrosarchaeum, Candidatus Nitrosopumilus and Marine Group II.

The identification and physical interpretation of quantum correlations, more recently explored beyond entanglement, is not always a simple task. Two assumptions that, at least in principle, should lead to a relatively large dispersion for the observables of a quantum bipartite formed by systems I and II are to assume that; (a) all the possible observables describing the composite are potentially equally probable as outcomes of measurements; and (b) there cannot be concurrence (positive reinforcement) between any of the observables within a given system, meaning all their corresponding operators do not commute. The so-called EPR states are known to observe (a). Here we demonstrate in general terms that they also verify (b). As examples, we discuss three-level systems. Given the character of (a) and (b), one may expect the CHSH correlation for qubits to naturally violate its associated Bell’s inequality (i.e., it would yield values greater than 2) when applied to EPR states. Surprisingly, we show the CHSH contradicts such prediction. This finding emphasizes the subtleties of correlations in quantum mechanics, where the conceivable dispersive interdependence of EPR states observables results counterintuitively in a more limited range of values for the CHSH correlation, not surpassing the nonlocality threshold of 2.

The aim of this work was to study the, so far, unexplored possibility that non-genetic inheritance of animal behavioral characteristics could depend on the state of the parents at the time of conception, by studying inheritance of high and low motor and exploratory activity in the first generation of rats. In this study, we measured the levels of motor and exploratory activity in rats at the ages of 2 and 5 months. Male and female rats were mated at the age of 5 months. The following groups were used: male and female rats with high motor activity at ages of 2 and 5 months (ACT+); male and female rats with high activity at the age of 2 months, but low activity at the age of 5 months (ACT–); male and female rats with low activity at the ages of 2 and 5 months (PAS–); male and female rats with low activity at the age of 2 months, but high activity at the age of 5 months (PAS+). Significant differences in the severity of exploratory activity were found between the offspring of ACT+ and ACT– rats. Moreover, these differences were observed only in males, and not in females. Differences between the offspring of PAS+ and PAS– rats were observed in both the male and female rats. The motor activity of animals in the period from 20 minutes after the start of registration did not differ between groups. Thus, it can be considered that individual characteristics of general motor activity are due to genetically inherited factors, while differences in the level of exploratory activity, apparently, are formed due to non-genetic influences from parents during mating.

Q-switched laser radiation at wavelengths of 355 nm, 532 nm, and 1064 nm from a Nd: YAG laser was used to generate plasma in laboratory air at the target surface made of compressed nano-silver particles of size 95 ± 10 nm. The emitted resonance spectra from the neutral silver at wavelengths of 327.9 nm and 338.2 nm indicate existence of self-reversal in addition to plasma self-absorption. Both lines were identified in emission spectra at different laser irradiation wavelengths with characteristic dips at the un-shifted central wavelengths. These dips are usually associated with self-reversal. Under similar conditions, plasmas at the corresponding bulk silver target were generated. The recorded emission spectra were compared to those obtained from the nano-material target. The comparisons confirm existence of self-reversal of resonance lines that emerge from plasmas produced at nano-material targets. This work suggests a method for recovery of the spectral line shapes and discusses practical examples. In addition, subsidiary calibration efforts that utilize the Balmer series Hα-line reveal that other Ag I lines at 827.35 nm and 768.7 nm are optically thin under variety of experimental conditions and are well-suited as reference lines for measurement of the laser plasma electron density.

This work communicates results from optical emission spectroscopy following laser-induced optical breakdown at or near nanomaterial. Selected atomic lines of silver are evaluated for consistent determination of electron density. Comparisons are presented with Balmer series hydrogen results. Of particular interest are measurements free of self-absorption effects. For several silver lines, asymmetries are observed in the recorded line profiles. Electron densities of interest range from 0.5 to 3 × 10¹⁷ cm^-3, for 5 nanosecond Q-switched Nd:YAG radiation at wavelengths of 1064, 532, and 355 nm, and for selected silver emission lines including 328.0, 338.2, 768.7, and 827.3 nm, and the hydrogen alpha Balmer series line at 656.3 nm. Line asymmetries are presented for the 328.0 nm Ag I line that is measured following generation of the plasma due to multiple photon absorption. This work explores electron density variations for different irradiance levels, and reports spectral line asymmetry of resonance lines for different laser fluence levels.

The growth of urban population, combined with an increase of extreme events due to climate changes call for a better understanding and representation of urban floods. Rainfall and infiltration are two important factors that affect the watershed response to a given precipitation event. In this paper, we evaluate the influence of the representation of infiltration and spatially variable rainfall on the computer simulation of the floods that affected the city of Hull, UK in June 2007. This work compares a uniform rainfall with one generated using Kriging with External Drift and a constant infiltration equal to the soil hydraulic conductivity with a neglected infiltration. The results of the four simulations are then compared with the flood extents observed by public authorities. It results that the computer model is able the reproduce the general dynamic of the flood and identify the main inundated areas. We found that neglecting the infiltration induce a better representation of this flood event. Furthermore, the use of radar rainfall results in an accuracy similar to the one obtained with a constant rainfall. This study indicates that when the spatial resolution of the rainfall data is low compared to the catchment size and the precipitation distribution is uniform, the spatial variability of the rainfall might not add significant information.

An increase in Spodoptera species was reported in Bt soybean fields expressing Cry1Ac insecticidal proteins in Brazil, requiring additional management with chemical insecticides. Here, we evaluated the dose effects of flubendiamide and thiodicarb on Spodoptera cosmioides (Walker, 1858), Spodoptera eridania (Stoll, 1782), Spodoptera albula (Walker, 1857) and Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera: Noctuidae) that survived on MON 87751 × MON 87708 × MON 87701 × MON 89788, expressing Cry1A.105, Cry2Ab2 and Cry1Ac; MON 87701 × MON 89788 soybean, expressing Cry1Ac; and non-Bt soybean. On unsprayed Cry1A.105/Cry2Ab2/Cry1Ac soybean, only S. frugiperda showed ~60% mortality after 10 d, whereas S. cosmioides, S. eridania and S. albula showed >81% mortality. Surviving larvae of all species on this Bt soybean showed &gt;80% mortality when exposed to the field label dose of flubendiamide (70 mL/ha) or thiodicarb (400 g/ha) or at 50% of these doses. In contrast, all four species had <25% and <19% mortality on Cry1Ac and non-Bt soybean, respectively. Surviving S. cosmioides, S. eridania and S. albula on these soybean types presented >83% mortality post-exposure to both dose levels of flubendiamide and thiodicarb. Some S. frugiperda larvae surviving on Cry1Ac and non-Bt soybean sprayed with a 50% dose of either insecticide developed into adults. However, L1 larvae developing on Cry1Ac soybean leaves sprayed with flubendiamide and L2 larvae on this soybean sprayed with thiodicarb had a prolonged immature stage, and females lower fecundity, which are likely to impact its population growth on soybean.

A growing body of literature suggests a causative relationship between severe adverse neurological outcomes and early life exposure to paracetamol (acetaminophen) in the presence of oxidative stress. Review of the literature revealed that, although its use is not regularly monitored, paracetamol has achieved near universal acceptance, with exposure in some pediatric populations exceeding 90%. In addition, use of the drug as well as associated adverse outcomes may have risen as a result of pharmaceutical advertising rather than need, and inappropriate use of the drug, both in terms of dose and indication, is widespread. These findings indicate that many clinicians and patients do not, at the present time, evenly weigh the potential risks with the potential benefits of paracetamol exposure early in life. Although retrospective studies might be envisioned to further address the neurodevelopmental risks of paracetamol use during early development, in silico simulations demonstrated that such studies can be thwarted by very high rates of use of the drug combined with associations between paracetamol use and oxidative stressors that act as cofactors in the induction of neurodevelopmental injury. These findings suggest that, despite persistent uncertainty, clinicians and patients should be more aware of available information pointing toward the potential dangers for neurodevelopment of early life exposure to paracetamol. Most importantly, health care workers need to provide a more balanced view, weighing both risks and benefits, when providing advice for patients regarding paracetamol use during periods of brain development.

Space debris, which includes retired satellites, used rocket stages, and explosion- or collision-related bits, poses a serious threat to both ongoing and future space activity. Addressing the problem of space debris has become essential for the sustainability of space operations due to the exponential development in satellite deployments and space research. The development of technology and tactics aimed at reducing the debris problem and assuring a cleaner cosmos are the main topics of this abstract, which provides an outline of the idea of sustainable space debris management and removal. The paper opens by outlining the history of space debris and the major difficulties caused by space debris, such as the dangers to functioning satellites, the possibility of catastrophic collisions, and the production of more debris as a result of cascade occurrences. The paper then emphasized the guidelines of space debris mitigation. It emphasizes the pressing requirement for long-term fixes that tackle the issue at its root. The paper then discusses different methods for managing space debris, such as proactive measures, active debris removal (ADR). It talks about how important it is to use sustainable methods during every stage of a space mission's lifecycle, from design and operation to deorbiting and disposal. This paper concludes with a summary of sustainable space debris removal, noting the difficulties caused by debris and the demand for all-encompassing approaches and technology to address this issue. It emphasizes how crucial global collaboration, technological development, and institutional frameworks are to creating a sustainable and debris-free space environment.

The process industry is confronted with rising demands for flexibility and efficiency. One way to achieve this are modular process plants that consist of pre-manufactured modules with their own decentralized intelligence. Plants are then composed of these modules as unchangeable building blocks and can be easily re-configured for different products. Condition monitoring of such plants is necessary, but available solutions are not applicable. The authors suggest an approach in which model-based symptoms are derived from few measurements and observers that are based on manufacturer knowledge. The comparisons of redundant observers lead to residuals that are classified to obtain symptoms. These symptoms can be communicated to the plant control and are inputs to an easily adaptable diagnosis. The implementation and validation at a modular mixing plant showcases the feasibility and the potential of this approach.

Ecological niche models have become exceptionally important, since their results allow to un-derstand many aspects related to the biology of the species being studied, even understanding its evolutionary relationships or their response to past or future projections. In this research, models were prepared to create climatic surfaces so as to produce bioclimatic layers based on the mete-orological data of the south of Peru. Temperature and precipitation data from 119 stations were obtained and homogenized. Then, using geographic and orographic covariates, models were prepared so as to obtain climatic surfaces of maximum and minimum temperature, and precipi-tation. The produced layers were evaluated through root-mean-square deviation (RMSD), mean absolute deviation of error (MAD) and goodness of fit (R2), and they were compared to other models for the area. Finally, the 19 bioclimatic surfaces were created. The results show general patterns for temperature and precipitation, some of them being particular. The climatic layers produced showed acceptable values for RMSD, MAD and R2. Comparison with other models shows statistically significant differences. Both the climatic and the produced bioclimatic surfaces were entered into a database for free access. Finally, comments are made on the importance and application of the bioclimatic layers produced here.

Since it was proposed, the Robot Operating System (ROS) has fostered solutions for various problems in robotics in the form of ROS packages. One of these problems is Simultaneous Localization and Mapping (SLAM), a problem solved by computing the robot pose and a map of its environment of operation at the same time. The increasingly availability of robot kits ready to be programmed and also of RGB-D sensors often pose the question of which SLAM package should be used given the application requirements. When the SLAM subsystem must deliver estimates for robot navigation, as is the case of applications involving autonomous navigation, this question is even more relevant. This work introduces an experimental analysis of GMapping and RTAB-Map, two ROS compatible SLAM packages, regarding their SLAM accuracy, quality of produced maps and use of produced maps in navigation tasks. Our analysis aims ground robots equipped with RGB-D sensors for indoor environments and is supported by experiments conducted on datasets from simulation, benchmarks and from our own robot.

The precise mathematical description of gaze patterns is still an unsettled matter of debate. This can, consequently, affect the analysis of this type of data in its practical applications. In this scope, we show evidence that a Lévy-flight description of eye-gaze trajectories is not only appropriate but its scale invariant properties are remarkably useful to assist in diagnosing children with Attention Deficit and Hyperactivity Disorder (ADHD), alongside with the usual cognitive tests. Using this picture, we find that the distribution of the characteristic exponent of Lévy-flights statistically is different in children with ADHD. Furthermore, we observe that these children deviate from a strategy that is considered optimal for searching processes, in contrast to non-ADHD children. We focus on the case where both eye-tracking data and data from a cognitive test are present and show that the study of gaze patterns in children with ADHD can help in identifying this condition. Since eye-tracking data can be gathered during cognitive tests without needing extra time-consuming specific tasks, we argue that it is in prime position to provide assistance in the arduous task of ADHD diagnosing.

We report a detailed investigation of vibrational modes, structure, and dynamics of glutathione (GSH) solutions using ultrasonic relaxation spectroscopy, FT-IR vibrational spectroscopy and electronic absorption measurements. The experimental data were analyzed in view of density functional theory (DFT) and molecular docking calculations. Three distinct Debye-type relaxation processes are resolved in the acoustic spectra, which are assigned to conformational changes between GSH conformers, self-association of GSH, and protonation processes. The standard volume changes for each process were estimated both experimentally and theoretically revealing a close resemblance among them. The higher the effect of the relaxation process in the structure, the greater the induced volume changes. From the temperature dependence of specific acoustic parameters, the thermodynamic characteristics of each process were determined. The experimental FT-IR spectra were compared with the corresponding theoretically predicted vibrational spectra revealing that the GSH dimers and extended conformers dominate the structure of GSH solutions in the high concentration region. The absorption spectra in the ultraviolet region confirmed the gradual aggregation mechanism that takes place in the aqueous GSH solutions. The results of the present study were discussed and analyzed in the framework of the current phenomenological status of the field.

The purpose of the present study was to evaluate the antioxidant activity and peptide levels of Feta cheese and other brined cheeses, and Metsovone cheese, and other smoked cheeses. The antioxidant activity was determined by Folin and FRAP assays, while the peptide content was determined by Bradford and Lowry assays. The assays were applied in the water soluble extract of cheeses. The results showed that Feta cheese and brined cow cheese differ in antioxidant activity. Feta cheese and brined goat cheese also differ in both antioxidant activity and peptide levels. Results also showed that Metsovone cheese and other smoked cheeses exhibit antioxidant activity and significant peptide levels. Moreover, the water soluble extracts of all cheeses show some anti-inflammatory activity, suggesting that may peptides exhibit anti-inflammatory activity.

The novel coronavirus has affected the mental state of the general public, more so among healthcare workers. During the pandemic when the infectivity had become intense, dental professionals were at stake as their work demanded more proximity with oral and nasal secretions. Many dentists had to close their clinics for fear of infection. This had a significant impact on their financial, social and emotional wellbeing. Stress is what arises when something we care about is at stake. Dentistry which is already a stressful discipline, the pandemic has multiplied the already existing pressures of isolation, the focus on perfectionism, compromise on treatment, and time pressures. Our study has attempted to assess the perceived stress among dentists and the various correlates impacting the same. Resilience is the capacity to bounce back productively during stressful situations. Resilience acts like a buffer to wither stress. Resilience is neither permanent nor global. In our study, we have attempted to assess resilience among dentists using a standard validated scale and various sociodemographic factors impacting resilience. Further, we have tried to assess the correlation between stress and resilience. We found that senior dentists with more years of experience had more resilience and their perceived stress was less. Though we found increased perceived stress among women dentists, resilience did not have any gender difference. It is essential to be pandemic prepared with the implementation of resilience-building strategies at various levels.

The most widely spread and neglected zoonotic disease – Leptospirosis, with an estimated 1.03 million cases and 58,900 deaths occurring annually, is a concern and can be prevented only by effective immunization. Due to the urgent need for a novel vaccine, various research organizations have been evaluating the protective immune response elicited by recombinant vaccines. In this study amino-acid sequences of Outermembrane protein (OMPL) 1, LipL 32, 41 and 46 from ten pathogenic serovars of Leptospira were selected to obtain epitopes that induce CD4+ and CD8+ T cell responses by binding to the MHC molecules. These B cell and T cell epitopes were used to design multi-epitope vaccine to which an adjuvant sequence was added at the N-terminal end and appropriate linkers were used to join the different epitopes to increase the efficiency of the vaccine constructs. Using an immuno-informatics approach, constructs were analyzed for the physiochemical properties, secondary and tertiary structure and its validation, docking with different receptors and prediction of binding affinity for each docked complex, followed by molecular dynamics simulation. Taking in consideration all the results, multi-epitope constructs designed may prove to be promising vaccine candidates against Leptospirosis and warrants experimental validation.

Coronavirus disease since December 2019 has significantly affected millions of people. Given the effect this disease has on the pulmonary systems of humans, there is a need for chest radiographic imaging (CXR) for monitoring the disease and preventing further deaths. Several studies have been shown that Deep Learning models can achieve promising results for COVID-19 diagnosis towards the CXR perspective. However, this research field is at an initial stage since there is a limited number of large CXR repositories regarding COVID-19. In this study, five deep learning models were analyzed and evaluated with the aim of identifying COVID-19 from chest X-Ray images. More specifically, we utilized the ResNet50, ResNet101, DenseNet121, DenseNet169 and InceptionV3 using Transfer Learning. All models were trained and validated on the largest publicly available repository for COVID-19 CXR images. Furthermore, they were evaluated on unknown data as well, that was not used for training or validation, authenticating their performance, and clarifying their usage in a medical scenario. All models achieved satisfactory performance where ResNet101 was the superior model achieving 96% in Precision, Recall, and Accuracy. Our outcomes show the potential of deep learning models on COVID-19 medical offering a promising way for the deeper understanding of COVID-19.

A novel stationary phase for affinity separations is presented. This material is based on sintered borosilicate glass readily available as semi-finished filter plates with defined porosity and surface area. The material shows fast binding kinetics and excellent long-term stability under real application conditions due to lacking macropores and high mechanical rigidity. The glass surface can be easily modified with standard organosilane chemistry to immobilize selective binders or other molecules used for biointeraction. In this paper, the manufacturing of the columns and their respective column holders by 3D printing is shown in detail. The model system protein A/IgG was chosen as an example to examine the properties of such monolithic columns under realistic application conditions. Several specifications, such as (dynamic) IgG capacity, pressure stability, long-term performance, productivity, non-specific binding, and peak shape, are presented. It could be shown that due to the very high separation speed, 250 mg antibody per hour and column can be collected, which surpasses the productivity of most standard columns of the same size. The total IgG capacity of the shown columns is around 4 mg (5.5 mg/mL), which is sufficient for most tasks in research laboratories. The cycle time of an IgG separation can be less than 1 minute. Due to the glass material's excellent pressure resistance, these columns are compatible with standard HPLC systems. This is usually not the case with standard affinity columns, limited to manual use or application in low-pressure systems. The use of a standard HPLC system also improves the ability for automation, which enables the purification of hundreds of cell supernatants in one day. The sharp peak shape of the elution leads to an enrichment effect, which might increase the concentration of IgG by a factor of 3. The final concentration of IgG can be around 7.5 mg/mL without the need for an additional nanofiltration step. The purity of the IgG was > 95% in one step and nearly 99% with a second polishing run.

Background: COVID-19 pandemic has pulled us all a few steps back, were we never shake hands or hug each other when we meet our friends and family after a gap, but instead we greet them by saying Namaste and joining our hands together. As we all know, COVID-19 spreads through air and the only way to shield ourselves is by maintaining a safe distance from one another. Methodology: In order to conduct a meta-analysis on the number of COVID-19 cases in Kerala and India, the data was retrieved from various sites hosted by the government bodies. The data for analysis was collected from May 2020 to July 2020. The average number of days required to reach every 5000 fresh cases were also calculated using this data. COVID-19 has affected all the economy holistically regardless of financial, behavioral, or societal aspects. Conclusion: Lifting of the lockdown in a step by step process keeping in mind the necessities for the nation was a thoughtful act, but the people who mistook this opportunity and did not remain in quarantine after coming from abroad was recognized as the reasons behind the sudden and uncontrolled rise in the number of COVID-19 cases in Kerala, India. The government authorities had no other option but to lift the restrictions to reduce the economic burdens that had already affected the daily wage worker and farmers prompting them to give up their lives.

Nanotechnology has enabled the development of novel therapeutic strategies such as targeted nanodrug delivery systems, control and stimulus-responsive release mechanisms, and the production of theranostic agents. As a prerequisite for the use of nanoparticles as drug delivery systems, the amount of loaded drug must be precisely quantified, a task for which two approaches are currently used. However, both approaches suffer from the inefficiencies of drug extraction and of the solid-liquid separation process, as well as from dilution errors. This work describes a new, reliable, and simple method for direct drug quantification in polymeric nanoparticles using attenuated total reflection Fourier transform infrared spectroscopy, which can be adapted for a wide variety of drug delivery systems. Silk fibroin nanoparticles and naringenin were used as model polymeric nanoparticle carrier and drug, respectively. The specificity, linearity, detection limit, precision and accuracy of the spectroscopic approach were determined in order to validate the method. A good linear relation was observed within 0.00 to 7.89 % of naringenin relative mass with an R2 of 0.973. The accuracy was determined by the spike and recovery method. Results showed an average 104% recovery. The limit of detection and limit of quantification of the drug loading content were determined to be 0.3 and 1.0 %, respectively. The method's robustness is demonstrated by the notable similarities between the calibrations carried out in two different equipment and institutions.

Inclusions in steels and alloys are known as factors that could lower deformation, mechanical, corrosion and other properties. Study of inclusions in nickel based alloys is important since these materials could suffer from corrosion degradation in harsh operational conditions, where inclusions could lead to a pitting initiation. For estimation of a harmful effect of different inclusions on corrosion resistance of Ni-based alloys, inclusion characteristics (such as composition, morphology, size, number and location) on film filter and dissolution of metal matrix around different inclusions on surfaces of metal samples after electrolytic extraction (EE) were investigated in two samples of industrial Ni-based alloys (alloy 718 and EP718). It was found that both Ni-based alloys have various inclusions: carbides (large size NbTi-C and small multicomponent carbides), nitrides TiNb-N and sulfides (TiNb-S in EP718 alloy). The higher harmful effect on corrosion resistance of metal was detected around sulfides and small carbides containing Mo, W, Cr. Dissolution effect was also observed around large carbides and nitrides, especially around inclusions having size more than 10 µm. Moreover, the dissolution of metal matrix around inclusions and clusters located on the grain boundaries is 2.1-2.7 times larger compared to that for those inclusions inside of grains of the given alloy samples.

The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports arenas, theaters, and other large buildings. Security in these environments can be achieved by a set of different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of TNT occurring, some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled CMOS camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of the explosive 2,4,6-trinitrotoluene (TNT). The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by PETN, RDX, and HMX. This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds.

In the present study, we have followed the hydrothermal path for the synthesis of gold nanoparticles (Au NPs) from the biomaterial Elaeocarpus ganitrus seeds extract, which is a rapid, eco-friendly, non-chemical way. The prepared NPs were thoroughly analyzed by PXRD & HR-TEM studies and also tested for photocatalytic dye degradation and anticancer studies. Besides, antioxidant, antibacterial and anticancer properties of Au NPs were studied. In vitro studies revealed the dose-dependent cytotoxic effect of Au NPs. The prepared nanoparticles showed good cytotoxic impact against Prostate cancer (PC-3) cells line. The results of the present study could contribute to synthesize new and cost-effective drugs from Elaeocarpus ganitrus seeds extract by using bio approach.

Ion association is an important process in aqueous dissolution, precipitation, and~crystallization of ionic inorganic, organic, and biological materials. Polyoxometalates (POMs) are good model compounds for understanding the complex relationships between lattice energy, ion-pairing in solution, and salt solubility. Here we perform calorimetric measurements to elucidate trends in cluster stability, lattice energy, and ion-pairing behavior studies of simple hexatantalate salts in neat water, parent hydroxide solutions, and molybdate melts, extending previous studies on the isostructural hexaniobates. High temperature calorimetry of alkali salts of hexatantalate reveals that the enthalpies of formation from oxides of the K, Rb, and Cs salts are more similar to each other than they are for their niobate analogues and that the tantalate cluster is energetically less stable than hexaniobate. Aqueous dissolution calorimetry reveals that the cesium salt of hexatantalate has a similar concentration dependence on its dissolution enthalpy to that of hexaniobate. However, unlike~rubidium hexaniobate, rubidium hexatantalate also exhibits increased concentration dependence, indicating that hextantalate can undergo increased ion-pairing with alkali salts other than cesium, despite the dilute environments studied. Dissolution enthalpies of POM salts in the parent alkali hydroxides shows that protonation of clusters stabilizes lattices even more than the strongly associating heavy alkali cations do. Additionally, neither weak nor strong lattice ion associations necessarily correlates with respectively high or low aqueous solubility. These studies illuminate the importance of considering ion-pairing among the interrelated processes in the aqueous dissolution of ionic salts that can be extended to serving as a model of cation association to metal oxide surfaces.

(1) Background: In this work, a series of benzimidazole derivatives containing colchicine-like and cathechol-like moieties with methyl group substitution in the benzimidazole ring were evaluated for their in vitro antiproliferative, pro-apoptotic and antioxidative activity against highly invasive breast cancer cell line MDA-MB-231 and related impairment of tubulin dynamics; (2) Methods: MTT assay was used to evaluate the antiproliferative activity. In vitro tubulin polymerization assay as well as docking analysis was applied to prove the alterations in tubulin polymerization. Immunofluorescent and DAPI staining reveal the pro-apoptotic potential of benzimidazole derivatives and the effect on tubulin’s dynamics in living cells. The antioxidant activity was evaluated by scavenging of H2O2 and hypochlorite ion and ortho-phenanthroline tests; (3) Results: The compounds containing colchicine-like moiety displayed significant growth inhibitory effect against cancer cell line as was highlighted the role of methyl functional group on the tubulin aggregation and blockage of mitosis. All compounds showed an ability to scavenge H2O2, while the compounds with cathecol-like moiety were more effective against hypochlorite ion and chelation of iron; (4) Conclusions: The benzimidazole derivative containing colchicine-like moiety and methyl group substitution in benzimidazole ring is a potential antiproliferative and microtubule destabilizing agent.

L-asparaginase (ASNase) is an aminohydrolase currently used in the pharmaceutical and food industries. Enzyme immobilization is an exciting option for both applications, allowing a more straightforward recovery and increased stability. High surface area and customizable porosity make carbon xerogels (CXs) promising materials for ASNase immobilization. This work describes the influence of contact time, pH, and ASNase concentration on the immobilization yield (IY) and relative recovered activity (RRA) using Central Composite Design methodology. The most promising results were obtained using CX with an average pore size of 4 nm (CX-4), reaching IY and RRA of 100%. At the optimal conditions, the ASNase-CXs biocomposite was characterized and evaluated in terms of kinetic properties and operational, thermal and pH stabilities. The immobilized ASNase onto CX-4 retained 71% of its original activity after six continuous reaction cycles, showed a good thermal stability at 37 °C (RRA of 91% after 90 min) and was able to adapt to both acidic and alkaline environments. Finally, the results indicated a 3.9-fold increase in the immobilized ASNase affinity for the substrate, confirming the potential of CXs as a support for ASNase and as a cost-effective tool for subsequent use in the therapeutic and food sectors.

CubeSats, known for their compact size and cost-effectiveness, have gained significant popularity. However, their limited size imposes restrictions on optical aperture and, consequently, Ground Resolution Distance in Earth Observation missions. To overcome this limitation, the concept of deployable optical payloads with segmented primary mirrors which can unfold like petals has emerged, enabling larger synthetic apertures and enhanced spatial resolution. This study explores the potential benefits of leveraging Additive Manufacturing (AM) and Topology Optimization (TO) in the realm of ultra-precision machining, specifically single point diamond machining. The goal is to reduce fixture weight while improving stiffness to minimize deformations caused by rotational and cutting forces which compromise optical performance. Through Finite Element Analysis, this research compares conventionally machined fixtures with those produced using AM and TO techniques. The results reveal that concept designs created through TO can achieve a remarkable 68% reduction in weight. This reduction makes the assembly, including the machining fixture and 12U deployable segments, manageable by a single operator without the need for specialized lifting equipment. Moreover, these innovative designs lead to substantial reductions of up to 86% and 51% in deformation induced by rotational and cutting forces, respectively.

Biomedical devices made from high-modulus and hardness materials play a critical role in enhancing the quality of life for individuals with bone-related ailments. While these materials have been successfully used in orthopedic applications, concerns including stress-shielding have necessitated the exploration of alternative solutions. An ideal biomedical implant requires a delicate balance of mechanical performance, corrosion resistance, tissue biocompatibility, and other properties such as tribological performance and osseointegration. This review explores the suitability of biodegradable magnesium (Mg) alloys as a promising material for biomedical implants. It delves into the essential properties of biomedical implants, emphasizing the importance of matching mechanical characteristics with human bone properties to mitigate stress shielding. The corrosion properties of implant materials are discussed, highlighting the need for controlled degradation to ensure the safety and longevity of implants. The focus then shifts to the potential of magnesium alloys as biomedical implants, examining their benefits, limitations, and the challenges associated with their high degradation rates and less-than-satisfactory mechanical properties. Alloying with elements such as aluminum, zinc, and others is explored to improve magnesium alloys' mechanical performance and corrosion resistance. Furthermore, this review discusses surface modification techniques, including chemical conversion coatings and biomimetic deposition, as effective strategies to enhance the corrosion resistance and biocompatibility of magnesium and its alloys. These modifications offer opportunities to improve the long-term performance of magnesium-based biomedical implants. This paper provides a comprehensive overview of the properties, challenges, and potential solutions associated with biodegradable magnesium alloys as a promising material for biomedical implants. It underscores the importance of addressing issues related to mechanical performance, corrosion resistance, and biocompatibility to advance the development of safe and effective biomedical implant materials.

The paper reports an analytical study of two problems of Rayleigh-Bénard convection(RBC): one in a Newtonian liquid occupying an axi-symmetric cylindrical enclosure(CE) and second in a two-dimensional rectangular enclosure(RE). Linear stability analysis is employed to obtain information on the onset of convection in terms of a critical Rayleigh number, Ra, as a function of the aspect ratio, Ro. The nature and the flow structures of the convective cells, at the onset of convection, are predicted theoretically by plotting the streamlines for different values of Ro. Not so shallow(Ro&lt;1 or Ro≪1), and very shallow enclosures(Ro≫1) are considered. Concepts of cell-width and the wave number are respectively used in these two types of enclosures. An explicit analytical expression for the number of cells as a function of Ro is obtained theoretically. Exact prediction of the critical value of Ra, viz., Rac, as a function of Ro is also made. These are new findings in the case of both CE and RE. The fundamental differences between the problems of CE and RE are also highlighted.

Cervical cancer presents a significant global health concern with high-risk human papilloma-viruses (HPVs) being identified as the cause of this cancer. Although current treatment methods for cervical cancer can eliminate lesions, preventing metastatic spread and minimizing tissue damage remains a major challenge. Therefore, the development of a safer and innovative thera-peutic approach is of utmost importance. Natural products like Fig latex, derived from the Ficus Carica tree, have demonstrated promising anti-cancer properties when tested on cervical cancer cell lines. However, the specific mechanisms by which Fig latex exerts its effects are still un-known. In this study, we conducted RNA-seq analysis to explore how Fig latex may counteract carcinogenesis in HPV-positive cervical cancer cell lines, namely CaSki (HPV type 16-positive) and HeLa (HPV type 18-positive). Our data from this investigation indicates that Fig latex influ-ences the expression of genes associated with the development and progression of cervical can-cer, including pathways related to " Nonsense-Mediated Decay (NMD) "cell cycle regulation" and Transcriptional Regulation by TP53. This selective impact of Fig latex on cancer-related pathways suggests a potential novel therapeutic approach for HPV-related cervical cancer.

Graphyne is a material that has unique mechanical properties, but little is known about how these properties change when the material has holes. In this work, the effect of hole geometry, considering circular, triangle, and rhombus hole configurations, on the mechanical nonlinear response of γ-graphyne structures is studied. Graphyne, graphdiyne, graphyne-3, and graphyne-4 structures are under investigation. An efficient nonlinear finite element analysis (FEA) method is adequately implemented under large deformations for this purpose. The study varied the size and shape of the holes to understand how these changes affect the nanostructure's mechanical response. The results indicate that the hole geometry significantly impacts the mechanical nonlinear response of γ-graphyne structures. The holes' size and shape affect the structures' elastic behavior, deformation, and strength. The findings can be used to optimize the design of γ-graphyne structures for specific mechanical applications. The study highlights the importance of considering the hole geometries in the design and fabrication of these materials.

Cellular biomolecular condensates termed ribonucleoprotein (RNP) granules often are enriched in messenger RNA (mRNA) molecules relative to the surrounding cytoplasm. Yet, the spatial localization and diffusion of mRNAs in close proximity to phase separated RNP granules is not well understood. In this study, we performed single molecule fluorescence imaging experiments of mRNAs in live cells in the presence of two types of RNP granules, stress granules (SG) and processing bodies (PB), which are distinct in their molecular composition and function. We developed a photobleaching- and noise-corrected colocalization imaging algorithm that was employed to determine the accurate positions of individual mRNAs relative to the granule’s boundaries. We found that mRNAs are often localized at granule boundaries, an observation consistent with recently published data. We suggest that mRNA molecules become spontaneously confined at the RNP granule boundary similar to the adsorption of polymer molecules at liquid-liquid interfaces, which is observed in various technological and biological processes. We also suggest that this confinement could be due to a combination of intermolecular interactions associated with, first, the screening of a portion of the RNP granule interface by the polymer and, second, electrostatic interactions due to a strong electric field induced by a Donnan potential generated across the thin interface.

Fibre reinforced concrete (FRC) has been used for decades in certain applications of the construction industry, such as tunnel linings and precast elements, but has experienced an important progress in recent times, boosted by the inclusion of guidelines for their use in some national and international standards. Traditional steel fibres have been studied in depth and their performance is well known although in recent years new materials have been proposed as possible alternatives. Polyolefin macro-fibres, for instance, have proven to enhance the mechanical properties of concrete and the parameters that define their behaviour (fibre length, fibre proportion or casting method, for instance) have been identified. These fibres overcome certain traditional problems related to steel fibres, such as corrosion or their interaction with magnetic fields, which can limit the use of steel in some applications. The behaviour of polyolefin fibre reinforce concrete (PFRC) has been numerically reproduced with success through an embedded cohesive crack formulation that uses a trilinear softening diagram to describe the fracture behaviour of the material. Furthermore, concrete behaves well under high temperatures or fire events, especially when it is compared with other construction materials, but the behaviour of PFRC must be analysed if the use of these fibres is to be extended. To this end, the degradation of PFRC fracture properties has been recently experimentally analysed under a temperature range between 20ºC and 200ºC. As temperature increases, polyolefin fibres modify their mechanical properties and their shape, which reduce their performance as reinforcement of concrete. In this work, those experimental results, which include results of low (3 kg/m3) and high (10 kg/m3) proportion PFRC specimens, are used as reference to study the fracture behaviour of PFRC exposed to high temperatures from a numerical point of view. The experimental load-deflection diagrams are reproduced by modifying the trilinear diagram used in the cohesive model, which helps to understand how the trilinear diagram parameters are affected by high temperature exposure. Finally, some expressions are proposed to adapt the initial trilinear diagram (obtained with specimens not exposed to high temperature) in order to numerically reproduce the fracture behaviour of PFRC affected by high temperature exposure.

Molecular structures, in chloroform and DMSO solution, of the monounsaturated free fatty acids (FFAs) caproleic acid (dec-9-enoic acid) and oleic acid (octadec-9-enoic acid) and the ω-3 FFAs α-linolenic acid (9Z,12Z,15Z)-octadeca-9,12,15-trienoic acid ALA), eicosapentanoic acid (5Z,8Z,11Z,14Z,17Z)-icosa-5,8,11,14,17-pentaenoic acid) and docosahexaenoic acid (4Z,7Z,10Z,13Z,16Z,19Z)-docosa-4,7,10,13,16,19-hexaenoic acid), are reported with the combined use of NMR and DFT calculations. Variable temperature and concentration chemical shifts of the COOH protons and transient 1D NOE experiments, in CDCl3, demonstrate the major contribution of low molecular weight aggregates of dimerized fatty acids, through intermolecular hydrogen bond interactions of the carboxylic groups, with parallel and antiparallel interdigitated structures, even at the low concentration of 20 mM. For the dimeric DHA, a structural model of an intermolecular hydrogen bond through carboxylic groups and an intermolecular hydrogen bond between the carboxylic group of one molecule and the ω-3 double bond of a second molecule, is shown to play a role. In DMSO-d6 solution the centro-symmetric hydrogen bond interactions are broken and the carboxylic groups form strong intermolecular hydrogen bond interactions with a discrete solvation molecule of DMSO. These solvation species form parallel and antiparallel interdigitated structures of low molecular weight. DFT structural models in CHCl3 and DMSO, in agreement with the NMR data, are compared with the structures in the liquid state

Cervical carcinogenesis is the leading cause of cancer related death in women and the role of high-risk human papillomavirus (HR-HPV) as a possible risk factor in the development of this cancer is well recognised. Despite the availability of multi-therapeutic approaches, there is still a major concern regarding the prevention of metastatic dissemination and excessive tissue injuries. Therefore, it is imperative to develop a safer and more efficient treatment modality. Ficus Carica, a natural plant, has shown potential therapeutic properties through its fruit latex when applied to HPV-positive cervical cancer cell lines. However, the mechanisms of action of Ficus Carica (fig) latex are not well understood. This study aims to provide a deeper insight into the biological activities of fig latex on human cervical cancer cell lines expressing high-risk HPV types 16 and 18. The data obtained from this study reveals that fig latex influences the expression of genes in-volved in "Class I MHC-mediated antigen presentation" as well as "Antigen processing: Ubiquitination and Proteasome degradation." These genes play a crucial role in host immune surveillance and the resolution of infection. Findings from this study suggest that fig latex may enhance T cell responses against oncogenic HPV, which could be beneficial for the clearance of early-stage cancer.

Fermented food products are widely consumed for their nutritional and health-promoting properties earning them a central place in diets around the globe. However, these foods can present a paradox, as they have the potential to harbor not only beneficial probiotics but also antibiotic-resistant (AR) microbes and genes. The impact of AR in fermented foods has far-reached implications, such as its potential effects on human health, repercussions in the food industry, and environmental consequences. An in-depth analysis of AR in fermented foods, including dairy products, fermented fruits and vegetables, meat products, and beverages, would provide insights into the extent and ramifications of the issue with these foods. Therefore, this review systematically presents the status of AR in fermented foods, with a particular focus on AR bacteria and genes within this category of food products. The review also highlights the complexities of AR in fermented foods, emphasizing the role of bacterial adaptation during the fermentation process and the dynamics of bacterial gene transfer. Various contributing factors to AR are brought into focus, including intrinsic resistance among bacteria in fermented foods and the potential risk of contamination with pathogenic bacteria. Moreover, this review presents a range of mitigation strategies, from the development of novel antimicrobials to advances in fermentation technology and regulatory control. This comprehensive perspective on the intricate interplay between AR and fermented food will potentially pave the way for more targeted research and mitigation strategies in this critical area.

This review focus on a critical analysis of nanocatalysts for Advanced Reductive Processes (ARP) and Oxidation Processes (AOP) designed for the degradation of poly/perfluoroalkyl substances (PFAS) in water. Ozone, ultraviolet and photocatalyzed ARP and/or AOP will be the basic treatment technologies. Besides the review of the nanomaterials with greater potential as catalyst for advanced processes of PFAS in water, the perspectives for its future development considering sustainability considerations will be discussed. Moreover, a brief analysis of the current state of the art of the ARP and AOP for the treatment of PFAS in water will be presented.

In the European Union (EU), cannabidiol products require pre-marketing authorisation under the novel food regulation. Currently, 19 CBD applications are under assessment at the European Food Safety Authority (EFSA). During the initial assessment of the application files, the EFSA Panel on Nutrition, Novel Foods and Food Allergens (NDA) located several knowledge gaps in their 07 June 2022 statement on safety of cannabidiol as a novel food that need to be addressed before the evaluation of CBD can be concluded. Namely, the effect of CBD on the liver, gastrointestinal tract, endocrine system, nervous system, psychological function, and reproductive system needs to be clarified. Nevertheless, the available literature allows a benchmark dose (BMD)-response modelling of several bioassays, resulting in a BMD lower confidence limit (BMDL) of 20 mg/kg bw/day for liver toxicity in rats. Human data in healthy volunteers found increases in the liver enzymes alanine aminotransferase (ALT) and aspartate aminotransferase (AST) in a study at 4.3 mg/kg bw/day, which was defined by EFSA NDA panel as a lowest observed adverse effect level (LOAEL). The EFSA NDA panel currently concluded that the safety of CBD as a novel food cannot be evaluated, leading to a so-called clock stop of the applications until the applicants provide the required data. Meanwhile, the authors suggest that CBD products still available as food supplements on the EU market despite the lack of authorisation must be considered as “unsafe”. Products exceeding a health-based guidance value of 10 mg/day must be considered as being “unfit for consumption” (Article 14(1) and (2) (b) of Regulation No 178/2002), while the ones in exceedance of the human LOAEL must be considered “injurious to health” (Article 14(1) and (2) (a) of Regulation No 178/2002).