This article proposes a particular strategy to proceed with a progressive electrification of public transport systems in cities. Starting from a bus operation model, the possible electrification of two routes is analysed, one urban and another extra-urban in the city of Pisa. An estimate is made of the energy uses associated with certain operating modes. The maximum level of consumption is estimated at approximately 280 kWh per day per bus for the urban route and excluding some special days, less than 215 kWh per day for the extra-urban route, for which a hybrid bus is proposed. Starting from an estimate of the daily consumption for the management of the two routes, the sizing of a photovoltaic system distributed on some modular shelters which serves to power the same routes is carried out. The resulting system has a power of the order of 190-200 kW. The modular solution is also outlined, and an installation is proposed. The analyzed case lends itself to being easily replicated.

The decarbonization of the electricity grid as one among the actions to reduce fossil fuel emissions, and thus their impact on global warming in the future, will be achieved mainly via the integration and widespread diffusion of renewable power sources. This is going to be supported also by the shift from the paradigm production-transmission-distribution, where electricity production oversees large-size power plants, to renewable-based distributed/diffused production, where electricity is generated very close or even by the same (group of) user(s) (or prosumers in the latter case). The number of mid-/small-size installations based on renewable energy technologies will therefore increase substantially, and the related renewable generation will be dominant against that from large-size power plants. Unfortunately, this will reduce the reliability of the grid very likely, unless appropriate countermeasures are taken/implemented, hopefully at the same time the paradigm shift is being achieved. To this aim, it is important to identify the anomalies and main fault causes that might determine in renewable-based power systems. This paper surveys the current state-of-the-art on anomalies and faults affecting wind-PV-storage hybrid power systems, i.e., the main renewable technology ensemble that will establish the future grid, and highlights possible research directions that may help to fill the literature gaps.

The integration of solar energy systems with agricultural practices, known as agrivoltaic systems, presents a promising solution for advancing sustainable food and energy production. This approach involves installing photovoltaic panels on agricultural lands, which allows for simultaneous crop cultivation and energy generation. Agrivoltaic systems offer a dual benefit: they enhance land use efficiency by utilizing the same area for both solar power generation and crop production, and they contribute to sustainable energy transitions. This abstract explores the benefits and challenges associated with agrivoltaic systems. Key advantages include increased land productivity, reduction in water usage due to shading effects, and potential economic gains from dual income streams. Furthermore, these systems can mitigate land use conflicts by combining food production with renewable energy generation. However, there are challenges to address, including the potential for decreased crop yields under solar panels, the need for appropriate system design to balance energy generation and agricultural needs, and the economic feasibility of initial investment and maintenance. The integration of agrivoltaic systems represents a critical step toward achieving sustainable development goals by promoting environmental stewardship and resource efficiency. Future research and advancements in technology are essential to optimize system performance and maximize benefits for both agriculture and energy sectors.

Shared public buildings have become centers of innovation, integrating advanced technologies to meet evolving societal needs. With a heightened emphasis on occupants’ health and well-being, these buildings serve as hubs for technological convergence, facilitating seamless connectivity and intelligent data analysis and management. Within this context, environmental monitoring emerges as a foundational element, pivotal to all aspects of building management. This article provides findings from the nationally funded RE-START project, which focuses on shared public buildings, with special regard to educational and medical facilities. The project explores enhanced indoor air quality monitoring, focusing in particular on CO2 concentration that is directly correlated with occupancy, as a fundamental element for developing health and safety protocols, energy efficiency strategies, integration of smart building technologies, and data-driven energy management. The intersection of environmental monitoring, energy efficiency, security, and IoT technologies in in indoor spaces are relevant. The outcomes of the study reveal the delicate nature of all the involved components, that need to be carefully developed in an integrated manner.

Carbonate reservoirs, influenced by depositional and diagenetic processes and characterized by features like faults and vugs that impact storage capacity, require more than traditional Borehole Imaging logs (BHI) for accurate porosity data. This data is essential for geological assessments, production forecasting, and reservoir simulations. This work aims to address this limitation by developing methods to measure and monitor the sustainability of carbonate reservoirs and exploring the application of sustainability principles to their management. The study integrates BHI and conventional logs from two wells to classify porosity-based facies within the Barra Velha Formation (BVF) in the Santos Basin. The methodology involves four steps: (i) analyzing conventional logs; (ii) segmenting BHI logs; (iii) integrating conventional and segmented BHI logs using Self-Organizing Maps (SOM); and (iv) interpreting the resulting classes. Matrix porosity values and non-matrix pore sizes categorize the porosity into four facies (A to D). Facies A has high non-matrix porosity with 14,560 small megapores, 5,419 large megapores, and 271 gigapores (71.9%, 26.76%, and 1.34% of the 20,250 pores, respectively). Facies B shows moderate non-matrix porosity with 8,669 small megapores, 2,642 large megapores, and 33 gigapores (76.42%, 23.29%, and 0.29% of the 11,344 pores, respectively) and medium matrix porosity. Facies C exhibits low non-matrix porosity with 7,749 small megapores, 2,132 large megapores, and 20 gigapores (78.27%, 21.53%, and 0.20% of the 9,901 pores, respectively) and medium matrix porosity. Facies D has low non-matrix porosity with 9,355 small megapores, 2,346 large megapores, and 19 gigapores (79.82%, 20.02%, and 0.16% of the 11,720 pores, respectively) and low matrix porosity. The novelty of this work lies in integrating data from two sources to classify porosity across the Pre-Salt reservoir interval, serving as a proxy for preliminary litho-facies identification without core data. This study advances our understanding of carbonate reservoir sustainability and heterogeneity, offering valuable insights for robust, sustainable reservoir characterization and management in the context of global environmental and geological changes.

In the face of the burgeoning electricity demands and the imperative for sustainable development amidst rapid industrialization, this study introduces a dynamic and adaptable framework suitable for policy-makers and renewable energy experts working on integrating and optimizing renewable energy solutions. While using a case study representative model for Sub-Saharan Africa (SSA) to demonstrate the challenges and opportunities present in introducing optimization methods to bridge power supply deficits and the scalability of the model to other regions, this study presents an agile multi-criteria decision tool that pivots on four key development phases, advancing upon established methodologies and pioneering refined computational techniques, to select optimal configurations from a set of Policy Decision Making Metrics (PDM-DPS). Central to this investigation lies a rigorous comparative analysis of variants of three advanced algorithmic approaches: Swarm-Based Multi-objective Particle Swarm Optimization (MOPSO), Decomposition-Based Multi-objective Evolutionary Algorithm (MOEA/D), and Evolutionary-Based Strength Pareto Evolutionary Algorithm (SPEA2). These are applied to a grid-connected hybrid system, evaluated through a comprehensive 8760-hour simulation over a 20-year planning horizon. The evaluation is further enhanced by a set of refined Algorithm Performance Evaluation Metrics (AL-PEM) tailored to the specific constraints. The findings not only underscore the robustness and consistency of the SPEA2 variant over 15 runs of 200 generations each, which ranks first on the AL-PEM scale but also validate the strategic merit of combining multiple technologies and empowering policymakers with a versatile toolkit for informed decision-making.

Combining wind and solar photovoltaic (PV) generation can provide complementary renewable power production, but depends on correlated resources. This study analyzed 10 years of wind data from Naama, Algeria to evaluate the potential for evening wind generation to offset the loss of solar at sunset. Average wind speeds showed a distinct increase during evening hours, coinciding with the decrease in solar irradiance. Wind turbine simulations using a 1.5 MW turbine and the wind data showed sufficient resources for profitable power production after sunset. Statistical analyses confirmed significantly higher wind speeds and simulated power output in evening vs daylight periods (p<0.05). The Pearson correlation coefficient between evening wind speeds and decreasing solar irradiance was 0.63, supporting a strong positive relationship. These findings indicate Naama has adequate wind resources to deploy economically viable wind power capacity that can complement existing solar infrastructure and provide renewable electricity after dark , .

This review paper explores the innovative realm of transparent solar panels, investigating their properties, applications, challenges, and recent advancements. Transparent solar panels, designed to harvest solar energy while allowing visible light to pass through, have gained significant attention due to their potential to revolutionize renewable energy technologies. The paper delves into the working mechanisms of various types of transparent solar panels, including Organic Photovoltaic (OPV) panels, Dye-Sensitized Solar Cells (DSSC), Perovskite Solar Cells, and Transparent Thin-Film Silicon Solar Cells. It discusses their integration into diverse applications, such as building-integrated photovoltaics, consumer electronics, the automotive industry, and aerospace. The review identifies challenges, including low efficiency, durability concerns, production costs, and integration hurdles, that currently hinder their widespread adoption. Moreover, the paper emphasizes the transformative potential of transparent solar panels in shaping the future of renewable energy, not only as energy generators but also as aesthetically pleasing and multifunctional components of our built environment. Finally, the paper underscores the need for continued research and development efforts to enhance efficiency, improve stability, and address integration challenges, paving the way for transparent solar panels to play a central role in the transition toward a more sustainable and energy-efficient future.

The paper explores the features of numerical simulation to analyze the dynamic behavior of drives controlled by pulse-width modulators. Modern motor control systems widely use pulse width modulation. Effective numerical modeling of such systems has specific features because the models employed are continuous-event and have hybrid behavior due to the presence of nonlinear links with discontinuities of the first kind. Therefore, it is essential to have special integration methods with variable steps, which should be factored in when developing the model. The paper shows how these problems are solved when modeling an electric drive with a DC motor in the SimInTech software.

We introduce firm solar forecasts as a strategy to operate optimally overbuilt solar power plants in conjunction with optimally sized storage systems so as to make up for any power prediction errors, hence entirely remove load balancing uncertainty emanating from grid-connected solar fleets. A central part of this strategy is plant overbuilding that we term implicit storage. We show that strategy, while economically justifiable on its own account, is an effective entry step to least-cost ultra-high solar penetration where firm power generation will be a prerequisite. We demonstrate that in absence of an implicit storage strategy, ultra-high solar penetration would be vastly more expensive. Using the New York Independent System Operator (NYISO) as a case study, we determine current and future cost of firm forecasts for a comprehensive set of scenarios in each ISO electrical region, comparing centralized vs. decentralized production and assessing load flexibility’s impact. We simulate the growth of the strategy from firm forecast to firm power generation. We conclude that ultra-high solar penetration enabled by the present strategy, whereby solar would firmly supply the entire NYISO load, could be achieved locally at electricity production costs comparable to current NYISO wholesale market prices.

Shale gas production is associated with significant usage of fresh water and discharge of wastewater. Consequently, there is a necessity to create the proper management strategies for water resources in shale gas production and to integrate conventional energy sources (e.g., shale gas) with renewables (e.g., solar energy). The objective of this study is to develop a design framework for integrating water and energy systems including multiple energy sources, cogeneration process, and desalination technologies in treating wastewater and providing fresh water for shale gas production. Solar energy is included to provide thermal power directly to a multi-effect distillation plant (MED) exclusively (to be more feasible economically) or indirect supply through a thermal energy storage system. Thus, MED is driven by direct or indirect solar energy, and excess or direct cogeneration process heat. The proposed thermal energy storage along with the fossil fuel boiler will allow for the dual-purpose system to operate at steady-state by managing the dynamic variability of solar energy. Additionally, electric production is considered to supply a reverse osmosis plant (RO) without connecting to the local electric grid. A multi-period mixed integer nonlinear program (MINLP) is developed and applied to discretize operation period to track the diurnal fluctuations of solar energy. The solution of the optimization program determines the optimal mix of solar energy, thermal storage, and fossil fuel to attain the maximum annual profit of the entire system. A case study is solved for water treatment and energy management for Eagle Ford Basin in Texas.

Energy communities are key actors in the energy transition since they optimally interconnect renewable energy capacities with the consumers. Despite versatile objectives, they usually aim at improving the self-consumption of renewable electricity within low voltage grids to maximize revenues. In addition, energy communities are an excellent opportunity to supply renewable electricity to regional and national energy systems. However, effective price signals have to be designed to coordinate the needs of the energy infrastructure with the interests of these local stakeholders. The aim of this paper is to demonstrate the integration of energy communities at the national level with a bottom-up approach. District energy systems with a building scale resolution are modelled in a mixed integer linear programming problem. The Dantzig-Wolfe decomposition is applied to reduce the computational time. The methodology lies within the framework of renewable energy hub, characterized by a high share of photovoltaic capacities. Both investments into equipment and its operation are considered. The model is applied on a set of five typical districts and weather locations representative of the Swiss building stock. The extrapolation to the national scale revealed a heterogeneous photovoltaic potential throughout the country. Present electricity tariffs promote a maximal investment into photovoltaic panels in every region, reaching an installed capacity of 67.2 GW and generating 80 TWh per year. Since the national PV capacity needed is forecast at 15.4 GW peak, coordinated investments between local and national actors are needed to prevent dispensable expenses. An uncoordinated design is expected to increase the total costs for residential energy systems by 43.2% and curtails 48.2% of local renewable electricity.

We present a numerical study in which large-scale bulk simulations of self-assembled DNA constructs have been carried out with a realistic coarse-grained model. The investigation aims at obtaining a precise, albeit numerically demanding, estimate of the free energy for such systems. We then, in turn, use these accurate results to validate a recently proposed theoretical approach that builds on a liquid-state theory, the Wertheim theory, to compute the phase diagram of all-DNA fluids. This hybrid theoretical/numerical approach, based on the lowest order virial expansion and a nearest-neighbor DNA model, can provide, in an undemanding way, a thermodynamic description of DNA associating fluids that is in semi-quantitative agreement with experiments. We show that the predictions of such scheme are as accurate as the ones obtained with more sophisticated methods. We also demonstrate the flexibility of the approach by incorporating non-trivial additional contributions that go beyond the nearest-neighbor model to compute the DNA hybridization free energy.

This research investigates entrepreneurial attitudes among 415 students in the academic sports domain. Utilizing a 15-item questionnaire, participants were categorized into four groups based on their sports background: individual and team sports with competitive history, amateur athletes, and non-practitioners. The questionnaire exhibited good internal consistency (Cronbach's alpha coefficient = 0.755). Statistical analysis using the Chi-Square Test of Homogeneity across criteria such as gender, competitive sports involvement, type of competitive sports, and engagement in amateur sports revealed significant differences in nine out of 60 comparisons. Furthermore, this study employs an explanatory approach to elucidate the distinctions among athletes, amateur, and non-athlete students in academic sports programs regarding assumption of responsibilities, proactive initiative, determination to establish their own businesses, perception of the comfort zone, and the perception of post-sports career adaptation. Additionally, a gender comparison is conducted concerning the perception of business risk, comfort and security in a stable workplace, and the applicability of sports-oriented approaches in business. These results provide valuable insights into how sports backgrounds shape entrepreneurial perspectives, thereby contributing to the development of customized entrepreneurial programs. Moreover, the study seeks to offer a nuanced comprehension of the diverse factors influencing the entrepreneurial attitudes and perceptions of students in sports academic programs.

This study explores the dynamic interplay between supply chain integration and marketing strategies in achieving customer satisfaction. Through a qualitative approach involving semi-structured interviews with supply chain and marketing professionals, the research delves into how these traditionally distinct functions can be aligned to enhance operational efficiency and deliver superior customer experiences. Findings reveal that strategic alignment between supply chain management (SCM) and marketing fosters better coordination of product availability and service delivery, thereby meeting customer expectations consistently and enhancing brand loyalty. Information sharing and technological integration emerge as critical enablers, facilitating real-time data exchange and collaborative decision-making. The study also identifies challenges such as organizational silos, cultural resistance, and technological constraints that impede seamless integration, highlighting the need for proactive strategies to foster cross-functional collaboration. Additionally, the evolving roles of sustainability and customer-centricity are emphasized as key drivers for differentiating brands and achieving competitive advantage. By integrating sustainable practices and adopting a customer-centric approach, organizations can build stronger customer relationships and enhance their market position. The research underscores the importance of leadership support, investment in technology, and a collaborative organizational culture in overcoming integration barriers. The study’s findings provide actionable insights for organizations aiming to optimize their SCM and marketing strategies, drive innovation, and sustain growth in an increasingly complex and competitive business environment. This research contributes to the growing body of knowledge on supply chain and marketing integration, offering practical recommendations for achieving customer satisfaction and long-term success.

This paper presents a study about the integration of Piezoelectric Energy Harvesting Systems (PE-EHS) in building envelopes for powering Fiber Bragg Grating (FBG) sensors, enabling efficient and low-consumption monitoring with the objective to leverage Structural Health Monitoring (SHM). The research includes preliminary tests conducted in a real environment to validate the PE-EHS when fully integrated into the façade, capturing mechanical vibrations generated mainly by wind loads. Based on these activities, the final configuration of PE-EHS is defined to provide a complete system for façade monitoring. This integrated system includes the Piezoelectric Generator (PEG), Supercapacitor (SC), Power Conditioner Circuit (PCC), Fibre Optic Sensing (FOS) Interrogator, and the IoT Gateway trans-mitting measurement data within an Internet of Things (IoT) monitoring platform. This configuration is tailored to address the challenges related to the structural integrity of building envelopes. Results demonstrate a potential for a stand-alone solution in the façade sector, but, raising issues for certain limitations, requiring further investigation. In particular, the study emphasizes constraints related to the energy production of PE-EHS for façade integration. It highlights the necessity to carefully consider these limitations within the broader context of their applicability, providing insights for the informed deployment of Piezoelectric Energy Harvesting technology in building envelope monitoring.

Sensory integration is an essential function of human life, and its decline causes difficulties in the quality of life, especially in older adults. In this study, we proposed an arm-reaching task based on a virtual reality head-mounted display (VR-HMD) system to assess sensory integration in daily life, and examined whether reaching task performance was associated with age and resting-state functional connectivity (rsFC) between the brain regions of interest involved in sensory integration. We hypothesized that performance during a reaching task with multiple cognitive loadings would be affected by aging. The gap angle between the reaching hand and target positions was compared between older and middle-aged adults as a measure of sensory integration function. In addition, rsFC, which was significantly correlated with the gap angles of individual participants in the older adult group, was identified using resting-state functional magnetic resonance imaging data. The mean gap angle was significantly larger in the older adults than in the middle-aged group and was also significantly correlated with connections between the left primary motor area and the left inferior temporal gyrus, temporo-occipital part. Because the connectivity between the areas is known to be related to visuomotor integration, the results suggest the involvement of visuomotor integration in the decline of sensory integration function in old age and the validity of the gap angle during the proposed VR-HMD task as an index for the decline in function.

As the global transition towards renewable energy accelerates, the integration of grid-scale energy storage systems has become increasingly critical for stabilizing energy supply and enhancing grid reliability. Among various storage technologies, lithium-ion batteries stand out for their high energy density, scalability, and relatively low environmental impact. This study investigates the performance and longevity of lithium-ion batteries in grid-scale applications, focusing on the impact of operational parameters such as cycling frequency, depth of discharge, temperature fluctuations, and charging/discharging rates. Employing a mixed-methods approach, we combined quantitative analysis of performance metrics (cycle life, capacity fade, efficiency) with qualitative assessments from case studies of existing grid-scale projects. Our findings reveal that while lithium-ion batteries exhibit robust performance in grid-scale storage, their longevity and efficiency are significantly influenced by operational conditions. Specifically, temperature management and optimized cycling strategies were identified as key factors in mitigating degradation and extending battery life. This research provides a comprehensive understanding of lithium-ion battery behavior in grid-scale environments, offering valuable insights for the design, optimization, and management of energy storage systems. By addressing the challenges of battery performance and longevity, our study contributes to the development of more sustainable and reliable grid storage solutions, facilitating the broader adoption of renewable energy sources.

This study investigates the impact of integrating ChatGPT on the academic writing performance and engagement of English as a Foreign Language (EFL) undergraduate students in Delhi, India, during the first semester of the academic year 2024/2025. It addresses the challenges within the Indian education system by exploring the effectiveness of AI-driven writing tools in enhancing writing skills and motivation among EFL learners. Employing a mixed-methods approach, the research evaluates ChatGPT's influence on 32 EFL Indian undergraduate students through draft revisions, questionnaires, and interviews. The findings highlight ChatGPT's positive impact on writing quality, engagement levels, and immediate feedback appreciation, emphasizing its potential in improving writing instruction and student outcomes in EFL contexts. Recommendations are provided for practitioners to integrate ChatGPT in writing exercises and for researchers to conduct longitudinal studies and explore ethical considerations in AI use for educational purposes, ultimately contributing to enhanced EFL education and technology-mediated learning.

As modern technologies, particularly home assistant devices, become more integrated into our daily lives, they are also making their way into the domain of energy management within our homes. Homeowners, now acting as prosumers, have access to detailed information in 15-minute or even 5-minute intervals, including weather forecasts, outputs from Renewable Energy Sources (RES)-based systems, appliance schedules and the current energy balance, which details any deficits or surpluses along with their quantities and the predicted prices on the Local Energy Market (LEM). The goal for these prosumers is to reduce costs while ensuring their home’s comfort levels are maintained. However, given the complexity and the rapid decision-making required in managing this information, the need for a supportive system is evident. This is particularly true given the routine nature of these decisions, highlighting the potential for a system that provides personalized recommendations to optimize energy consumption, whether that involves adjusting the load or engaging in transactions with the LEM. In this context, we propose a recommendation system powered by Large Language Models (LLM), Scikit-llm and Zero-Shot Classifiers, designed to evaluate specific scenarios and offer tailored advice for prosumers based on the available data at any given moment. Two scenarios for a prosumer of 5.9 kW are assessed using candidate labels, such as Decrease, Increase, Sell and Buy.

This paper introduces a novel framework for zero-shot learning (ZSL), i.e., to recognize new categories that are unseen during training, by distilling knowledge from foundation models. Specifically, we first employ ChatGPT and DALL-E to synthesize reference images of unseen categories from text prompts. Then, the test image is aligned with text and reference images using CLIP and DINO. Finally, the predicted logits are aggregated according to their confidence to produce the final prediction.Experiments are conducted on multiple datasets, including CIFAR-10, CIFAR-100, and TinyImageNet. The results demonstrate that our model can significantly improve classification accuracy compared to previous approaches, achieving AUROC scores above 96\% across all test datasets. Our code is available at https://github.com/1134112149/MICW-ZIC.

The North Sea Offshore Grid concept has been envisioned as a promising alternative to: 1) ease the integration of offshore wind and onshore energy systems, and 2) increase the cross-border capacity between the North Sea region countries at low cost. In this paper we explore the techno-economic benefits of the North Sea Offshore Grid using two case studies: a power-based offshore grid, where only investments in power assets are allowed (i.e. offshore wind, HVDC/HVAC interconnectors); and a power-and-hydrogen offshore grid, where investments in offshore hydrogen assets are also permitted (i.e. offshore electrolysers, new hydrogen pipelines and retrofitted natural gas pipelines). We compare these scenario results with a business as usual scenario, in which offshore wind is connected radially to the shore and no offshore grid is deployed. All scenarios are run with the IESA-NS model, without any specific technology ban and under open optimization. This paper also presents a novel methodology, combining Geographic Information Systems and Energy System Models, to cluster offshore spatial data and define meaningful offshore regions and offshore hub locations. This novel methodology is applied to the North Sea region to define nine offshore clusters taking into account offshore spatial claims, and identifying suitable areas for single-use and multi-use of space for renewable energy purposes. The scenario results show that the deployment of an offshore grid provides relevant cost savings, ranging from 1% to 4.1% of relative cost decrease (2.3 bn € to 8.7 bn €) in the power-based, and ranging from 2.8% to 7% of relative cost decrease (6 bn € to 14.9 bn €) in the power-and-hydrogen based. In the most extreme scenario (H2) an offshore grid permits to integrate 283 GW of HVDC connected offshore wind and 196 GW of HVDC meshed interconnectors. Even in the most conservative scenario (P1) the offshore grid integrates 59 GW of HVDC connected offshore wind capacity and 92 GW of HVDC meshed interconnectors. When allowed, the deployment of offshore electrolysis is considerable, ranging from 61 GW to 96 GW, with capacity factors of around 30%. Finally, we also find that, when imported hydrogen is available at 2 €/kg (including production and transport costs), large investments in an offshore grid are not optimal anymore. In contrast, at import costs over 4 €/kg imported hydrogen is not competitive.

In the world's first pig-to-human cardiac xenotransplant, the elevated levels of porcine cytomeg-alovirus (PCMV) are considered key factors contributing to patient mortality. This has renewed attention to PCMV, a virus widely prevalent in pigs. Currently, there are no effective drugs or vaccines targeting PCMV, and its high detection difficulty poses challenges for prevention and control research. In this study, antiviral small hairpin RNA (shRNA) was selected and inserted into the Rosa26 and miR-17-92 loci of pigs via a CRISPR/Cas9-mediated knock-in strategy. Further in vitro viral challenge experiments demonstrated that these genetically edited pig cells could effec-tively limit PCMV replication. Through this process, we constructed a PCMV-infected cell model, validated partial viral interference sites, enhanced gene knock-in efficiency, performed gene editing at two different gene loci, and ultimately demonstrated that RNA interference (RNAi) technology combined with CRISPR/Cas9 has the potential to generate pig cells with enhanced antiviral infec-tion capabilities. This opens up possibilities for the future production of pig populations with anti-viral functionalities.

The next future using machine tools will be dominated by highly flexible and interconnected systems, in order to achieve the required productivity, accuracy and reliability. Nowadays, distortion and vibration problems are easily solved for the most common cases by sing models based on equations describing the physical laws dominating the machining process; however additional efforts are needed to overcome the gap between scientific research and the real manufacturing problems. In fact, there is an increasing interest in developing simulation packages based on “deep knowledge and models” that aid the machine designer, the production engineer, or machinists to get the best of their machines. This article proposes a systematic methodology to reduce problems in machining by means of a simulation utility, which recognizes, collects and uses the main variables of the system/process as input data, and generates objective results that help in the proper decision-making. Direct benefits by such an application are found in a) the fixture/clamping optimal design, b) the machine tool configuration, c) the definition of chatter free optimum cutting conditions and the right programming of cutting tool path at the Computer Aided Manufacturing (CAM) stage. The information and knowledge-based approach showed successful results in several local manufacturing companies.

Metabolomics deals with multiple and complex chemical reactions within living organisms and how these are influenced by external or internal perturbations. It lies at the heart of omics profiling technologies not only as the underlying biochemical layer that reflects information expressed by the genome, the transcriptome and the proteome, but also as the closest layer to the phenome. The combination of metabolomics data with the information available from genomics, transcriptomics, and proteomics offers unprecedented possibilities to enhance current understanding of biological functions, elucidate their underlying mechanisms and uncover hidden associations between omics variables. As a result, a vast array of computational tools have been developed to assist with integrative analysis of metabolomics data with different omics. Here, we review and propose five criteria – hypothesis, data types, strategies, study design and study focus – to classify statistical multi-omics data integration approaches into state-of-the-art classes under which all existing statistical methods fall. The purpose of this review is to look at various aspects that lead the choice of the statistical integrative analysis pipeline in terms of the different classes. We will draw a particular attention to metabolomics and genomics data to assist those new to this field in the choice of the integrative analysis pipeline.

We present a first formal analysis of specific and complete local integration. Complete local integration was previously proposed as a criterion for detecting entities or wholes in distributed dynamical systems. Such entities in turn were conceived to form the basis of a theory of emergence of agents within dynamical systems. Here, we give a more thorough account of the underlying formal measures. The main contribution is the disintegration theorem which reveals a special role of completely locally integrated patterns (what we call ι-entities) within the trajectories they occur in. Apart from proving this theorem we introduce the disintegration hierarchy and its refinement-free version as a way to structure the patterns in a trajectory. Furthermore we construct the least upper bound and provide a candidate for the greatest lower bound of specific local integration. Finally, we calculate the i-entities in small example systems as a first sanity check and find that ι-entities largely fulfil simple expectations.

Battery electric vehicles provide an opportunity to balance supply and demand in future power systems with high shares of fluctuating renewable energy. Compared to other storage systems such as pumped-storage hydroelectricity, electric vehicle energy demand is highly dependent on charging and connection choices of vehicle users. We present a model framework of a utility-based stock and flow model, a utility-based microsimulation of charging decisions, and an energy system model including respective interfaces to assess how the representation of battery electric vehicle charging affects energy system optimization results. We then apply the framework to a scenario study for controlled charging of nine million electric vehicles in Germany in 2030. Assuming a respective fleet power demand of 27 TWh, we analyze the difference between power-system-based and vehicle user-based charging decisions in two respective scenarios. Our results show that taking into account vehicle users’ charging and connection decisions significantly decreases the load shifting potential of controlled charging. The analysis of marginal values of equations and variables of the optimization problem yields valuable insights on the importance of specific constraints and optimization variables. In particular, state-of-charge assumptions and representing fast charging drive curtailment of renewable energy feed-in and required gas power plant flexibility. A detailed representation of fleet charge connection is less important. Peak load can be significantly reduced by 5% and 3% in both scenarios, respectively. Shifted load is very robust across sensitivity analyses while other model results such as curtailment are more sensitive to factors such as underlying data years. Analyzing the importance of increased BEV fleet battery availability for power systems with different weather and electricity demand characteristics should be further scrutinized.

Over the past decades, overweight and obesity has become a global epidemic and the leading threat for death. To prevent the serious risk, an overweight or obese individual must apply a long-term weight-management strategy to control food intake and physical activities, which is however, not easy. Recently, with the advances of information technology, more and more people can use wearable devices and smartphones to obtain physical activity information, while they can also access various health-related information from Internet online social networks (OSNs). Nevertheless, there is a lack of an integrated approach that can combine these two methods in an efficient way. In this paper, we address this issue and propose a novel mobile-social framework for health recognition and recommendation, namely, H-Rec². The main ideas of H-Rec² include (1) to recognize the individual's health status using smartphone as a general platform, and (2) to recommend physical activity and food intake based on personal health information, life science principles, and health-related information obtained from OSNs. To demonstrate the potentials of the H-Rec² framework, we develop a prototype that consists of four important components: (1) an activity recognition module that senses physical activity using accelerometer, (2) a health status modeling module that applies a novel algorithm to generate personalized health status index, (3) a restaurant information collection module that collects relevant information from OSN, and (4) a restaurant recommendation module that provides personalized and context-aware recommendation. To evaluate the prototype, we conduct both objective and subjective experiments, which confirm the performance and effectiveness of the proposed system.

This study explores the critical role of supply chain management (SCM) in shaping marketing strategies in emerging markets, where rapid economic growth and dynamic consumer behavior present both challenges and opportunities. Utilizing a qualitative approach, the research synthesizes insights from industry professionals across various sectors to elucidate how effective SCM practices can enhance marketing outcomes. Findings reveal that flexibility in supply chain operations is indispensable for adapting to the volatile market conditions typical of emerging economies, enabling companies to respond swiftly to changes in consumer demand and market trends. Advanced technologies such as predictive analytics, artificial intelligence, and the Internet of Things are identified as key enablers, providing real-time insights that align supply chain processes with marketing objectives. The ability to customize products and services to local preferences, supported by agile supply chains, emerges as a crucial factor in gaining a competitive edge. Cost management and optimization through efficient supply chain practices allow for competitive pricing and effective promotions, essential in price-sensitive markets. The study also highlights the importance of managing regulatory compliance, mitigating risks, and enhancing customer experience through integrated supply chain strategies. Cultural considerations and local market knowledge are critical for aligning product features and marketing messages with consumer expectations. Additionally, sustainability is becoming increasingly relevant, with environmentally conscious supply chains enhancing brand image and supporting marketing strategies. The impact of e-commerce and the role of supplier relationships further underscore the need for cohesive SCM and marketing integration. This research provides a comprehensive framework for understanding how supply chain capabilities can be leveraged to achieve marketing success in emerging markets, offering practical insights for companies seeking to navigate these complex environments effectively.

Smart grids represent the evolution of traditional electrical grids through the integration of digital and communication technologies. These grids are capable of monitoring and managing the distribution of electricity efficiently and resiliently. Artificial Intelligence (AI) plays a crucial role in this context, offering advanced solutions for optimization, forecasting, and energy management. This paper explores the main AI technologies applied to smart grids, highlighting their advantages, challenges, and impacts on energy efficiency and sustainability. The methodology employed includes a comprehensive literature review, analysis of current AI applications in smart grids, and examination of case studies to illustrate the practical implementation and benefits of AI technologies in this field.

In the past twenty years, the IT industry has moved away from using physical servers for workload management to workloads consolidated via virtualization and, in the next iteration, further consolidated into containers. In the next step, container workloads based on Docker and Podman as underlying container technologies were orchestrated/automated via Kubernetes or OpenShift. On the other hand, high-performance computing (HPC) environments have been lagging in that process, as there’s still much work to figure out how to apply containerization platforms for HPC in real-life scenarios. Kubernetes and OpenShift have many advantages – generally speaking, container technologies use quite a bit less overhead from the computing perspective while providing many benefits in flexibility, modularity, and maintenance. Therefore, they are ideal for tasks requiring a lot of computing power. There are also some tradeoffs regarding the complexity of these two platforms - they’re just not that user-friendly when used by people without years of experience managing them. In this paper, we propose a different architecture based on seamless hardware integration and user-friendly, dynamic workload placement based on real-time performance analysis and prediction coupled with Machine Learning-based scheduling.

Integrating systems acquired from third parties and legacies has become of great necessity in companies. This is mainly due to the need to exchange information between entities, such as banks, suppliers, customers, allies, etc. Therefore, it is essential to guarantee the integrity of the data and keep the integration up to date with the changes that can occur. Furthermore, reducing the transaction risk and avoiding losing information is necessary. Implementing this complex task involving technological and business challenges requires appropriate architecture implementation. This article presents an architecture named Dynamic Canonical Data Model through agnostic messages. The contribution involves treating the low link in integrating software units, also called the integration of loosely coupled software units. In particular, it focuses on internal data and external data integration. The proposal reduces their integration, maintenance time, and cost, maximizing their scalability and promoting reuse. To illustrate their components, a case study undertaken at the Mexican Logistics Company Paquetexpress is presented. The company has evaluated different enterprise application integration systems over 26 years to achieve a standardized integration. The article describes an architecture designed and implemented for this delivery company in a real-world case. The implementation’s source code was registered in the National Registry of Copyrights of Mexico.

In response to increasing urbanization and the need for infrastructure resilient to natural hazards, this study introduces an AI-driven predictive model designed to assess the risk of soil liquefaction. Utilizing advanced ensemble machine learning techniques, the model integrates geotechnical and geographical data to accurately predict the potential for soil liquefaction in urban areas, with a specific focus on Yokohama, Japan. This methodology leverages comprehensive datasets from geological surveys and seismic activity to enhance urban planning and infrastructure development in smart cities. The primary outputs include detailed soil liquefaction risk maps that are essential for effective urban risk management. These maps support urban planners and engineers in making informed decisions, prioritizing safety, and promoting sustainability. The model employs a robust combination of neural networks and gradient boosting decision trees to analyze and predict data points, assessing soil susceptibility to liquefaction during seismic events. Notably, the model achieves high accuracy in predicting soil classifications and N-values, which are critical for evaluating soil liquefaction risk. Validation against an extensive dataset from geotechnical surveys confirms the model’s practical effectiveness. Moreover, the results highlight the transformative potential of AI in enhancing geotechnical risk assessments and improving the resilience of urban areas against natural hazards.

This qualitative study explores collaborative supplier relationships within the context of e-commerce, aiming to uncover the dynamics, challenges, strategies, impacts, and future trends shaping these partnerships. Through thematic analysis of interviews with e-commerce platform managers, supplier representatives, and industry experts, the study identifies three primary types of relationships: transactional, relational, and strategic. Critical factors influencing these relationships include trust, effective communication, technological integration, and regulatory compliance. Challenges such as information asymmetry, cultural differences, logistical complexities, and competitive pressures are examined, alongside strategies for enhancing collaboration, including clear communication protocols, performance evaluations, and technological advancements. The findings highlight the significant impact of collaborative supplier relationships on business performance, including cost efficiencies, supply chain resilience, innovation capacity, customer satisfaction, and market competitiveness. Looking forward, trends in digital transformation, sustainability initiatives, global supply chain networks, resilience-building strategies, and industry collaboration are discussed as shaping the future landscape of e-commerce partnerships. Embracing these trends presents opportunities for organizations to innovate, adapt, and sustain growth in the competitive digital marketplace.

This qualitative research investigates the impact of Supplier Relationship Management (SRM) on e-commerce innovation adoption. Through semi-structured interviews and document analysis, the study explores how SRM practices influence organizational capabilities to innovate in the context of digital commerce. Key themes emerged, emphasizing the critical role of trust, communication, collaboration, strategic alignment, technology integration, organizational culture, leadership, and external factors in shaping e-commerce innovation. Trust was found to be foundational, fostering transparent communication and collaborative relationships that facilitate innovation. Effective communication channels and collaborative initiatives enabled organizations and suppliers to leverage combined expertise, driving the development of innovative e-commerce solutions. Strategic alignment ensured that both parties worked towards shared goals, supported by technology integration that enhanced operational efficiency and decision-making. Organizational culture and leadership were identified as crucial in creating environments conducive to continuous innovation. External factors such as market dynamics, regulatory requirements, and technological advancements influenced innovation strategies, highlighting the need for adaptive and responsive SRM practices. The findings underscore the interconnectedness of these factors within the SRM framework, offering insights into how organizations can enhance their innovation capabilities and competitiveness in the digital economy. By strategically managing SRM practices and integrating sustainable initiatives, organizations can navigate challenges, seize opportunities, and achieve sustained success in e-commerce innovation.

The abstract of the study on the challenges and opportunities of supply chain digitalization encapsulates the primary findings and their implications from the perspectives of industry leaders. This qualitative research investigated how senior executives across diverse sectors perceive and manage the transition to digital supply chains. Interviews with twenty industry leaders revealed key challenges such as data integration, cybersecurity, organizational resistance, and financial constraints. Data integration issues were particularly pronounced, as participants struggled with unifying disparate data sources from legacy and modern systems, creating barriers to achieving cohesive digital frameworks. Cybersecurity emerged as a critical concern due to the increased vulnerability of digital supply chains to cyber threats, necessitating robust and proactive security measures. Organizational resistance, driven by employee apprehensions about job displacement and technological unfamiliarity, highlighted the need for effective change management practices, including clear communication and training. Financial constraints, especially for small and medium-sized enterprises (SMEs), underscored the difficulty of justifying the substantial investments required for advanced digital technologies. Despite these challenges, the study identified significant opportunities associated with digitalization, including enhanced operational efficiency, improved visibility, predictive analytics, and better customer satisfaction. Digital tools were found to streamline processes, reduce manual intervention, and provide real-time insights into supply chain performance, thus facilitating more informed decision-making and swift responses to disruptions. The accelerated adoption of digital technologies during the COVID-19 pandemic demonstrated their essential role in enhancing supply chain resilience and agility. Additionally, the integration of sustainability goals through digitalization supported resource optimization and waste reduction, aligning with broader corporate social responsibility objectives. The findings suggest that while the path to digital transformation is complex, the benefits of improved efficiency, decision-making, customer satisfaction, and sustainability present compelling incentives for organizations to invest in and embrace digital supply chain solutions.

The critical systems, which the failure and malfunction may result in human, environment and financial severe damages, are essential components in various sectors and particularly in energy domains. Although unwished, integration error problems in supervision of critical systems occurs, incurring significant expenses because of operator’s subjective analysis and on hardware topology failures. In this work, a malleable model design approach is proposed to formulate and solve the integration error problem in the critical systems supervision in terms of reliability. A real Hybrid Power Plant (HPP) case is considered as a requirement for a study case with simulated data. A method framework with informal approach (C4 diagram) and formal approach (Hierarchical Coloured Petri Nets) in radial spectrum is applied to the HPP supervision design. Using formal methods, a formulation and solution to this problem through structured, scalable and compact mathematical representations are possible. This malleable model intends to guarantee functional correctness and then reliability of the plant supervision system based on system software architecture. Outcomes suggest corroboration that the malleable model is appropriate for energy domain, and can be used for other types of critical systems, bringing all the benefits of this methodology to the context in which it will be applied.

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply chain integration architectures enable the conversion of individual into integrated strategies. The architectures are categorised and the process develops into a conceptual system for identifying the correlations between individual participants’ strategic areas of interest and the integrated supply chain areas of interest. The novelty of this paper is a conceptual system for green-field supply chain integration architectures, which can be applied in real world by supply chain practitioners.

This qualitative study explores the intricacies of building sustainable supplier relationships in the e-commerce sector, focusing on best practices and strategic approaches. Through in-depth interviews with procurement managers, supply chain experts, and supplier representatives, the research identifies four critical themes: trust, technology integration, ethical practices, and performance measurement. Trust is found to be the foundation of effective supplier relationships, fostering open communication and collaboration, which are essential for addressing challenges and co-creating solutions. The integration of digital technologies such as supply chain management software, blockchain, and the Internet of Things significantly enhances transparency, decision-making, and operational efficiency, providing a competitive edge. Ethical practices, including adherence to fair labor standards and environmental sustainability, are increasingly crucial as consumer and regulatory expectations evolve, necessitating alignment between e-commerce companies and their suppliers. Performance measurement and continuous improvement are vital for maintaining quality and efficiency, with clear metrics and regular evaluations driving constructive feedback and optimization of supply chain processes. The study underscores the interdependence of these elements in fostering resilient and adaptable supplier relationships. The findings offer practical guidance for e-commerce businesses and suppliers, emphasizing the need for a holistic approach to supplier management that balances trust, technology, ethics, and performance. This approach not only enhances operational effectiveness but also ensures the long-term sustainability of supplier relationships in the dynamic e-commerce landscape. The research contributes to the theoretical understanding of supplier relationship management, providing a comprehensive framework for future studies and practical applications in the e-commerce industry.

This qualitative research explores Supplier Relationship Management (SRM) strategies within the context of e-commerce customization, aiming to understand how businesses effectively manage relationships with suppliers to meet personalized consumer demands. Through semi-structured interviews with industry professionals, key themes such as trust, communication, technological integration, strategic alignment, sustainability, and collaboration emerged as critical factors influencing SRM effectiveness. Trust was found to be foundational, fostering cooperation and commitment between e-commerce businesses and suppliers through transparent interactions. Effective communication and the integration of advanced technologies like AI and blockchain enhanced operational efficiency and innovation capabilities, enabling businesses to deliver tailored customer experiences. Strategic alignment between businesses and suppliers proved essential for shared success and mutual benefit, while sustainability practices increasingly shaped consumer preferences and brand reputation. Collaboration facilitated joint innovation and accelerated product customization, underscoring the importance of partnerships in achieving strategic goals. However, challenges including supply chain complexity, managing consumer expectations, and regulatory compliance highlighted the need for continuous improvement and adaptive strategies. Overall, this research contributes valuable insights for e-commerce businesses seeking to optimize SRM strategies, enhance supply chain efficiency, and navigate the complexities of customization in a competitive digital marketplace. By leveraging trust, communication, technology, strategic alignment, sustainability, and collaboration, businesses can effectively meet evolving consumer demands and achieve sustainable growth.

Agile procurement has emerged as a transformative strategy for organizations striving to maintain competitiveness in a rapidly evolving marketplace. This qualitative research investigates the implementation, benefits, challenges, and outcomes of agile procurement practices in supply chain management. Through semi-structured interviews and case studies across diverse industries, this study explores how agile procurement enhances organizational adaptability and responsiveness. Key findings reveal that agile procurement enables organizations to swiftly adjust strategies in response to market fluctuations and customer demands, fostering increased customer satisfaction and loyalty. The integration of advanced technologies, including AI and blockchain, facilitates real-time data analysis, optimizing procurement processes and enhancing supply chain efficiency. Organizational culture emerges as a critical factor in successful agile procurement, with leadership support and a collaborative environment driving cultural change towards agility and innovation. Despite its benefits, challenges such as resistance to change and the need for significant technology investments are identified, requiring careful change management and strategic alignment. Case studies illustrate the versatility of agile procurement across sectors, showcasing its role in enhancing operational efficiencies, innovation capabilities, and overall supply chain performance. In conclusion, agile procurement offers organizations a strategic framework to navigate complexities and uncertainties effectively, capitalizing on market opportunities while mitigating risks. Embracing agile principles fosters a resilient organizational culture capable of adapting to dynamic market conditions. Future research should focus on further refining agile procurement strategies to address emerging challenges and sustain competitive advantage in the global marketplace.

The integration of supply chain analytics and Customer Relationship Management (CRM) systems represents a critical strategy for organizations seeking to enhance operational efficiency and customer-centricity in today's competitive business environment. This qualitative study investigates the motivations, strategies, challenges, and outcomes associated with integrating supply chain analytics with CRM systems across diverse industries. Motivations for integration include gaining a unified view of customer data, improving decision-making capabilities, enhancing operational efficiency, and ensuring strategic alignment across organizational functions. Strategies employed by organizations include cross-functional collaboration, investment in scalable technology platforms, and leadership commitment to drive successful integration initiatives. Despite the potential benefits, the integration process presents challenges such as data integration complexities, technical interoperability issues, and organizational resistance to change. Addressing these challenges requires robust technological solutions, effective change management strategies, and a proactive approach to data governance and security. The study identifies significant outcomes from integration efforts, including improved operational efficiency through streamlined processes and optimized resource allocation, enhanced customer insights leading to personalized experiences, and strengthened strategic decision-making supported by real-time analytics.

This qualitative research investigates the role of collaborative planning in synchronizing supply chain and marketing activities among multinational companies (MNCs). Collaborative planning integrates traditionally separate functions to enhance operational efficiency, customer responsiveness, and strategic alignment. The study employs semi-structured interviews with key informants from diverse MNCs across industries and geographies to explore practices, challenges, and outcomes associated with collaborative planning initiatives. Findings highlight the pivotal role of cross-functional collaboration and advanced technologies, such as artificial intelligence and big data analytics, in improving demand forecasting accuracy, optimizing inventory management, and enabling personalized marketing strategies. Challenges include organizational resistance, cultural barriers, and the complexity of aligning global strategies. Strategic outcomes encompass improved operational efficiency, cost savings, enhanced customer satisfaction, and strengthened competitive advantage. Moreover, the integration of sustainability goals underscores the importance of environmental responsibility and regulatory compliance in collaborative planning frameworks. The study also identifies emerging trends in digital transformation and agile supply chains shaping future practices. Overall, collaborative planning emerges as a strategic imperative for MNCs to navigate complexities, capitalize on opportunities, and sustain growth in a globalized marketplace.

Aligning supply chain and marketing functions is crucial for high-tech startups aiming to successfully launch new products in competitive markets. This qualitative research explores the strategies, challenges, benefits, and best practices associated with supply chain and marketing alignment in high-tech startups. Through a detailed analysis of case studies and semi-structured interviews with industry professionals, the study identifies key insights into how startups can effectively integrate these functions to enhance operational efficiency, market responsiveness, customer satisfaction, and risk management. The findings reveal that successful alignment requires the formation of cross-functional teams, leveraging integrated technologies like CRM and ERP systems, establishing regular inter-departmental communication, and developing joint performance metrics. These strategies foster collaboration and ensure that supply chain and marketing efforts are coordinated towards shared goals. However, startups face challenges such as differing departmental objectives, resource constraints, communication barriers, and technological limitations, which hinder effective alignment. Benefits observed from effective alignment include improved operational efficiency through streamlined processes, enhanced market responsiveness to adapt quickly to changing demands, increased customer satisfaction by delivering products that meet market expectations, and better risk management through proactive identification and mitigation of supply chain and market risks. Best practices identified include fostering a culture of collaboration, investing in technology for data integration and transparency, aligning strategic objectives across functions, and continuously monitoring and adjusting alignment strategies. Integration of broader elements such as sustainability, entrepreneurship, emotional intelligence, marketing, and supplier relationship management further enriches the alignment framework. This study contributes to a deeper understanding of how high-tech startups can strategically align their supply chain and marketing functions to achieve competitive advantage and sustainable growth in dynamic market environments.

Background: Implantation of an endovascular device disrupts the homeostatic CD31:CD31 interactions among quiescent endothelial cells, platelets, and circulating leukocytes. The aim of this study was to mask endovascu-lar stents with peptides imitating CD31, to mimic the device's surface to resemble that of a healthy vascular endothelium. Methods: Peptide design relied on established trans-homophilic sequences found within domains 1 and 2 of CD31. Subsequently, synthetic peptides were immobilized onto flat CoCr and nitinol discs and their impact on the primary human arterial endothelial cell phenotype was evaluated in vitro. Following this, clinical-grade CoCr and nitinol endovascular devices were coated with one of the peptides that demonstrated the capability to induce a pro-physiologic endothelial phenotype, implanted in the arteries of rabbits, and compared to un-coated controls. Results: Membrane-distal CD31 domains 1 and 2 peptides exhibited a distinct capability to foster a healthy endothelial phenotype in vitro. By day 7 post-aortic implantation, CoCr stents were evenly covered by whole-some endothelial cells, devoid of thrombo-inflammatory signs, in contrast to both bare metal and drug-eluting stents. At day 60, nitinol-coated flow diverters demonstrated enhanced performance in comparison to the control groups for excluding experimental carotid aneurysms, facilitating the formation of a seamless "neo-arterial" wall. Conclusion: Membrane-distal CD31 biomimetic peptides effectively camouflage the device surface, prevent-ing local reactions and promoting rapid and seamless endovascular integration.

Abstract: Patient blood samples are invaluable in clinical omics databases, yet current methodologies often fail to fully uncover the molecular mechanisms driving patient pathology. While Genome-scale Metabolic Models (GEMs) show promise in systems medicine by integrating various omics data, having only exometabolomic data remains a limiting factor. To address this gap, we introduce a comprehensive pipeline integrating GEMs with patient plasma metabolome. This pipeline constructs case-specific GEMs using literature-based and patient-specific metabolomic data. Novel computational methods, including adaptive sampling and an in-house developed algorithm for the rational exploration of the sampled space of solutions, enhance integration accuracy while improving computational performance. Model characterization involves task analysis in combination with clustering methods to identify critical cellular functions. The new pipeline was applied to a cohort of trauma patients to investigates shock-induced endotheliopathy using patient plasma metabolome data. By analyzing endothelial cell metabolism comprehensively, the pipeline identified critical substrates and contributed to the development of targeted therapeutic strategies. Our study demonstrates the efficacy of integrating patient plasma metabolome data into computational models to analyze endothelial cell metabolism in disease contexts. This approach offers a deeper understanding of metabolic dysregulations and provides insights into diseases with metabolic components and potential treatments.

Digitalization plays a crucial role in improving the performance of chemical companies. In this context, different modeling, simulation, and optimization techniques like MILP, discrete-event simulation (DES), and data-driven (DD) models are being used. Due to their heterogeneity, these techniques must be executed individually, and holistic optimization is a manual and time-consuming process. We propose Benders decomposition to combine these techniques into one rigorous optimization procedure. The main idea is that heterogeneous models can simultaneously be optimized as Benders subproblems. We illustrate this concept with the distributed permutation flow shop scheduling problem (DPFSP) and assume that a MILP, DES, and DD model exist for three flow shops. Our approach can compute bounds and report gap information on the optimal makespan for five medium-sized literature instances. The approach is promising because it enables the optimization of heterogeneous models and makes it possible to build optimization capabilities on an existing model and tool landscape in chemical companies.

Recent methodological advances have enabled researchers to track the network structure of the human brain over time. Together, these studies provide novel insights into effective brain function, highlighting the importance of the systems-level perspective in understanding the manner in which the human brain organizes its activity to facilitate behavior. Here, we review a range of recent fMRI and electrophysiological studies that have mapped the relationship between inter-regional communication and network structure across a diverse range of brain states. In doing so, we identify both behavioral and biological axes that may underlie the tendency for network reconfiguration. We conclude our review by providing suggestions for future research endeavors that may help to refine our understanding of the functioning of the human brain.

This study investigates the critical role of Supplier Relationship Management (SRM) in enhancing the e-commerce user experience. In an increasingly competitive digital marketplace, effective SRM practices are essential for optimizing supply chain operations and meeting customer expectations. The research employs a qualitative approach, combining semi-structured interviews with industry stakeholders, extensive literature review, and case studies to explore various dimensions of SRM. Key findings reveal that strategic supplier selection criteria, including quality, cost efficiency, reliability, innovation, and sustainability, are pivotal in ensuring a robust and adaptable supply chain. Effective communication practices, such as transparency, frequent updates, and digital tools, foster strong supplier relationships and enable timely issue resolution. Performance management strategies, centered on KPI monitoring and continuous improvement, support operational excellence and customer satisfaction. Risk management practices, including diversification, contingency planning, and advanced analytics, are crucial for mitigating disruptions and ensuring supply chain resilience, as highlighted by the challenges posed during the COVID-19 pandemic. Technological integration with blockchain, AI, IoT, data analytics, and automation enhances efficiency, transparency, and decision-making capabilities in SRM. Furthermore, the study underscores the evolving integration of sustainability and ethical sourcing into SRM strategies, reflecting broader corporate responsibility goals. Ultimately, this research contributes to understanding how effective SRM strategies drive competitive advantage in e-commerce by enhancing supply chain reliability, responsiveness, and customer-centricity. As e-commerce continues to evolve, adapting and innovating SRM practices will be vital for companies aiming to sustain growth and meet the dynamic demands of global markets.

Supplier Relationship Management (SRM) plays a pivotal role in enhancing delivery performance within the e-commerce sector, yet understanding its nuanced impacts remains crucial for optimizing operational efficiencies and customer satisfaction. This qualitative research explores the intricate dynamics of SRM in e-commerce, focusing on strategic alignment, technological integration, trust, collaboration, and risk management as key determinants of delivery reliability. Through in-depth interviews and thematic analysis, the study reveals that strategic alignment of supplier capabilities with firm objectives is fundamental for maintaining a responsive and synchronized supply chain. Technological integration, including AI-driven analytics and blockchain applications, emerges as critical for real-time monitoring and adaptive decision-making, thereby improving delivery accuracy and efficiency. Trust and collaboration are identified as essential pillars for building resilient supplier relationships, fostering transparent communication and joint problem-solving. Effective risk management practices, such as supplier diversification and contingency planning, mitigate disruptions and ensure consistent delivery performance. Despite these benefits, challenges such as technological adoption barriers, cultural differences, communication complexities, resource constraints, and supplier reliability issues persist, necessitating strategic interventions. Recommendations include investing in advanced SRM technologies, promoting cultural understanding, enhancing communication protocols, allocating adequate resources, and fostering collaborative initiatives with suppliers. These strategies aim to overcome challenges and optimize SRM practices, ultimately enhancing delivery performance and competitiveness in the e-commerce landscape.

Strategic procurement practices within global supply chains are crucial for organizations aiming to navigate complex challenges and achieve sustainable competitive advantage. This qualitative research explores how procurement has evolved from a cost-centric function to a strategic enabler of broader organizational objectives, including risk management, sustainability, and innovation. Through semi-structured interviews with procurement managers and supply chain executives across diverse industries, the study investigates key themes such as supplier relationship management, technological integration, and the impact of sustainability considerations on procurement decision-making. Findings indicate that effective procurement strategies, such as strategic sourcing and collaborative supplier partnerships, are pivotal in enhancing supply chain resilience and operational efficiency. Technological advancements, particularly artificial intelligence and big data analytics, are transforming procurement operations by optimizing processes and enhancing decision-making capabilities. However, the study identifies significant challenges, including regulatory complexities, geopolitical uncertainties, and internal resistance to change, which require adaptive approaches to procurement management. Sustainability emerges as a critical driver, with organizations adopting ethical sourcing practices, reducing carbon footprints, and promoting supplier diversity to meet environmental and social responsibility goals. Leadership qualities such as visionary thinking and emotional intelligence are essential for navigating these challenges and driving innovation within procurement practices. Overall, this research contributes to a deeper understanding of strategic procurement's role in organizational strategy and offers practical insights for enhancing procurement effectiveness and resilience in a competitive global market landscape.

This qualitative study explores the role of supply chain partnerships in enhancing brand value through collaborative marketing efforts. By analyzing diverse cases from industries including consumer electronics, apparel, automotive, and food and beverage, the research examines how different forms of partnerships—strategic alliances, co-marketing, joint ventures, and supplier integrations—contribute to brand value. The study employed a multiple case study design, incorporating semi-structured interviews, document analysis, and participant observations to gather data. The findings reveal that these partnerships enable companies to leverage complementary strengths, resulting in enhanced innovation, product quality, sustainability, market reach, and ethical standards. Collaborative marketing strategies such as joint product launches, sustainable branding campaigns, and co-developed customer programs are identified as key drivers of brand value, effectively increasing brand awareness, customer loyalty, market share, and perceived quality. Despite challenges like coordination complexity, goal misalignment, cultural differences, and cost management issues, the benefits realized—such as improved brand image, faster time-to-market, and reduced costs—demonstrate the substantial value of effective supply chain partnerships. The study underscores the importance of strategic alignment between supply chain activities and brand objectives, highlighting that successful partnerships foster deeper consumer engagement and stronger market positions. This research provides actionable insights for companies seeking to optimize their supply chain collaborations to enhance brand value, offering a foundation for future studies and practical applications in supply chain management and marketing. The findings contribute to a deeper understanding of how supply chain partnerships can be strategically managed to drive brand excellence in a competitive market environment.

This qualitative investigation delves into the intricate interplay of cultural factors within supply chain integration, aiming to elucidate how diverse cultural dimensions shape communication dynamics, decision-making processes, and collaborative efforts among global supply chain practitioners. Employing a phenomenological approach, the study explores the lived experiences and subjective perceptions of supply chain managers and professionals, providing nuanced insights into the profound impact of national culture, organizational culture, digital technologies, and sustainability considerations on supply chain operations. Key findings highlight the significant influence of national culture, as conceptualized by Hofstede's cultural dimensions, on supply chain interactions. These dimensions—such as power distance, individualism versus collectivism, uncertainty avoidance, and masculinity versus femininity—play crucial roles in shaping how individuals perceive authority, manage risks, negotiate agreements, and engage in collaborative practices across diverse cultural contexts. Cultural norms and values deeply influence both intra-organizational dynamics and inter-organizational relationships within global supply chains. Organizational culture emerges as a pivotal determinant of supply chain integration success. Cultures characterized by transparency, trust, inclusivity, and a commitment to continuous improvement create environments conducive to effective cross-border collaboration. Conversely, organizations with conflicting or ambiguous cultural norms face challenges in aligning goals, fostering mutual understanding, and maintaining open communication channels with international partners. The study underscores the transformative role of digital technologies in enhancing supply chain management practices. Technologies such as blockchain, artificial intelligence, and the Internet of Things improve supply chain visibility, optimize operations, and enhance decision-making processes, strengthening resilience against disruptions. The adoption and integration of these technologies depend on organizational readiness, technological capabilities, and cultural acceptance within supply chain networks. Cultural factors influence the adoption pace, implementation strategies, and utilization patterns of digital technologies, emphasizing the need for strategic alignment between technological investments and cultural norms to maximize their potential benefits. Furthermore, sustainability considerations are critical in shaping cultural values and priorities within supply chain networks. Organizations increasingly recognize the importance of environmental sustainability, ethical sourcing practices, and corporate social responsibility in shaping their reputations, stakeholder relationships, and long-term business goals. Cultural factors significantly influence organizations' approaches to sustainability, guiding their strategic decisions and operational practices.

This qualitative research study delves into the intricate dynamics of how organizations adapt to supply chain disruptions during crises, offering profound insights into the strategies, practices, and challenges encountered in enhancing supply chain agility. Through in-depth interviews with supply chain managers across diverse industries, key themes such as proactive risk management, technological integration, collaboration with supply chain partners, and adaptive leadership have emerged as crucial determinants of agility and resilience. Additionally, the study highlights the significance of organizational culture, effective communication, and external factors such as regulatory requirements and market dynamics in shaping supply chain agility. By embracing a holistic approach that integrates these multifaceted factors, organizations can bolster their capacity to anticipate, detect, and respond to disruptions, thereby maintaining or enhancing overall performance even in the face of uncertainty and complexity. The insights gleaned from this research are poised to inform theory development, guide managerial practice, and influence policy-making in the realm of supply chain management, equipping organizations with the knowledge and tools needed to navigate future disruptions successfully.

In everyday life, the birth of a number of blind people takes place and millions of people are already available. Visually impaired people struggle to walk safely and in- dependently because they have trouble detecting obstacles. In this work, we suggest a novel approach to detecting obstacles utilizing an Arduino UNO board and an ul- trasonic sensor (HC-SR04). The main goal of this research is to increase the mobility and security of blind people in a variety of settings. The suggested system makes use of the HC-SR04 ultrasonic sensor’s capability to precisely measure distance and identify nearby obstructions. As the main processor component, the Arduino UNO board processes algorithms for real-time obstacle detection while also collecting data from the sensor. The device is intended to give the visually impaired user immedi- ate aural input while informing them of the location and proximity of obstacles. To Extensive testing is done in controlled and real-world settings to assess the system’s performance and dependability. In the studies, the effectiveness of obstacle detec- tion, the system’s response time, and its practicality and usefulness for blind people are all measured. The findings show that the suggested obstacle detection method provides very accurate obstacle identification at a safe distance. Users who are blind or visually handicapped may successfully understand their surroundings thanks to the aural feedback system, which helps them to navigate by making judgments that are well-informed. Additionally, the system responds quickly, guaranteeing that the user receives real-time obstacle updates to increase safety and confidence while mov- ing. The study’s conclusions demonstrate the possibility of using the Arduino UNO board with the HC-SR04 ultrasonic sensor as a practical and affordable approach for detecting obstacles.

The primary objective of this study is to examine the extent of financial integration between Latin American and US financial markets, particularly in light of recent efforts to foster integration through trade agreements. Spanning from January 1, 1990, to December 31, 2019, the sample focuses on major market indices and key sectors. Financial integration is quantified using a DCC multivariate GARCH model, incorporating a smooth transition model, structural breaks, and regression-based approaches. Results indicate increased comovement with the US for main market indices in Argentina, Chile, Colombia, Mexico, and Peru, while Brazil shows a decrease. Similar trends are observed in sectoral analyses. The study also reveals heightened correlation post-trade agreements. Structural break analysis highlights significant shifts in dynamic correlations for countries with US free trade agreements. These findings support the argument of increased financial integration, bearing significance for portfolio diversification and international policy formulation.

This study explores the intricacies of supplier relationships and inventory optimization within high-technology industries, offering a comprehensive analysis of the strategic imperatives and operational challenges faced by firms in these sectors. By adopting a qualitative research methodology involving semi-structured interviews with supply chain professionals and documentary analysis, the study provides in-depth insights into the evolving dynamics of supply chain management. Findings reveal a marked shift towards collaborative and strategic supplier relationships, characterized by trust, transparency, and joint innovation initiatives. These partnerships are essential for enhancing operational efficiency, driving product development, and navigating market uncertainties. Additionally, the research underscores the critical role of advanced technologies, such as artificial intelligence and the Internet of Things, in optimizing inventory levels and improving supply chain visibility. The integration of these technologies facilitates precise demand forecasting and proactive inventory management, thereby reducing costs and enhancing service levels. However, the study also highlights significant challenges, including geopolitical uncertainties, supply chain disruptions, and cultural barriers, which necessitate robust risk management strategies and adaptive supply chain practices. Strategic implications for organizational leaders and policymakers include the need to invest in supplier development, embrace digital transformation, and enhance risk management frameworks to build resilient and agile supply chains. This study contributes valuable insights into the complex interplay between supplier relationships, inventory optimization, and technological integration in high-technology industries, offering actionable recommendations for practitioners and researchers seeking to drive innovation and maintain competitiveness in a dynamic global marketplace.

This qualitative research investigates the pivotal role of Human Resource Management (HRM) in enhancing supply chain effectiveness. Through semi-structured interviews with 25 professionals across various industries, the study explores how HRM practices influence key aspects of supply chain management (SCM), including talent management, training and development, leadership, organizational culture, and technology integration. Findings highlight the strategic alignment between HRM and SCM as crucial for optimizing supply chain performance and responsiveness. Effective talent management strategies, such as recruitment, development, and succession planning, emerged as critical factors in ensuring operational stability and innovation within supply chains. Training programs were identified as instrumental in equipping employees with the necessary skills to navigate technological advancements and market complexities, fostering collaboration and enhancing decision-making capabilities. Leadership development initiatives were also found to be pivotal in promoting organizational effectiveness and fostering a culture of continuous improvement. The study further underscores the role of HRM in cultivating a collaborative and inclusive organizational culture that enhances communication, trust, and teamwork among supply chain stakeholders. Additionally, the integration of digital technologies and sustainability considerations emerged as transformative trends shaping modern supply chains, with HRM practices playing a crucial role in facilitating technological adoption and promoting environmentally responsible practices. Addressing challenges such as resource constraints, regulatory compliance, economic uncertainties, and global supply chain complexities remains crucial for organizations aiming to optimize HRM practices and achieve sustainable supply chain performance. Overall, this research contributes to a deeper understanding of how HRM can drive innovation, collaboration, and resilience within supply chains, positioning organizations for long-term success and growth.

Supply chain disruptions pose significant challenges to organizations, highlighting the critical importance of resilience in contemporary supply chains. This qualitative research explores the implications of supply chain disruptions on organizational resilience, drawing insights from interviews with supply chain managers and executives across various industries. The study identifies key factors that contribute to resilience, including agility, collaboration, risk management, strategic planning, technology integration, leadership, and organizational culture. Through thematic analysis, the research elucidates how these factors interact to enable organizations to manage and recover from disruptions effectively. Findings underscore the importance of agility in adapting to changing circumstances, collaboration with stakeholders to coordinate responses, and proactive risk management to anticipate and mitigate disruptions. Strategic planning and technology integration emerge as vital enablers of resilience, along with effective leadership and a resilient organizational culture that fosters adaptability and continuous improvement. The implications of supply chain disruptions extend beyond operational and financial impacts to include reputational and relational dimensions, emphasizing the importance of transparent communication and stakeholder engagement. The practical insights offered by this study provide guidance for organizations seeking to enhance their resilience and ensure continuity of operations in an increasingly complex and dynamic supply chain environment.

This paper presents a methodology for the integration of Building Information Modeling (BIM) and Life Cycle Cost Analysis (LCCA) to assess the economic implications of designing aging-in-place (AIP) homes at the conceptual stage. With the global increase in the aging population, there is an increased demand for housing solutions tailored to the needs of elderly individuals. Focusing on the importance of the early phase of design, this study aims to improve the process of making efficient decisions by providing a comprehensive assessment of the life cycle costs associated with AIP homes. The study introduces a semi-automated model for the economic evaluation of AIP homes, enabling the estimation of costs throughout the houses’ entire life cycle, from design and construction to operation, maintenance, and eventual renovation or disposal. The said model facilitates the exploration of the long-term economic feasibility of design’s related decisions with an emphasis on the importance of considering the life cycle costs early during the design process to optimize the functionality and economic viability. By investing in accessible and universal design features upfront, the initial costs for modifications can lead to long-term savings by reducing the need for extensive retrofits. The model can easily do comparison between different design alternatives in terms of their lifecycle costs, allowing designers to assess the financial impact of using important features in their design such as wider doorways, accessible bathrooms, and elevators. Overall, this study provides valuable insights for designers and homeowners about the economic aspects of designing AIP homes as a support for efficient decision-making during the early stages of the design process.

The scientific community has shown considerable interest in Industry 4.0 due to its capacity to revolutionise the manufacturing sector through digitalisation and data-driven decision-making. However, the actual implementation of Industry 4.0 within complex industrial settings presents obstacles that are typically beyond the scope of mainstream research articles. In this paper, a comprehensive case-study detailing our collaborative partnership with a leading medical device manufacturer is presented. The study traces their evolution from a state of limited digitalisation to the development of a digital intelligence platform that leverages data and machine learning models to enhance operations across a wide range of critical machines and assets. The main business objective was to enhance the energy efficiency of the manufacturing process, thereby improving its sustainability measures while also saving costs. The project encompasses energy modelling and analytics, Fault Detection and Diagnostics (FDD), renewable energy integration and advanced visualisation tools. Together, these components enable informed decision making in the context of energy efficiency.

This qualitative study explores the pivotal role of supply chain collaboration (SCC) in enhancing marketing effectiveness within organizations. By integrating supply chain management (SCM) practices with marketing strategies, companies can optimize operational efficiencies, anticipate consumer demands, and deliver personalized customer experiences. The study emphasizes technological integration, such as IoT, big data analytics, and blockchain, which enables real-time data sharing, predictive analytics, and enhanced visibility across the supply chain. Strategic alignment between SCM and marketing functions ensures efficient resource allocation and strategic deployment of marketing investments, fostering synergistic outcomes and maximizing market impact. Collaborative innovation within supply chains drives continuous improvement and product innovation, strengthening brand reputation and customer loyalty. Additionally, supply chain resilience, achieved through robust risk management and agile strategies, enables businesses to maintain operational stability and mitigate disruptions, safeguarding customer relationships and brand integrity. This research underscores the strategic imperative for organizations to embrace SCC as a driver of sustainable growth and competitive advantage in dynamic market environments. By leveraging SCC to integrate SCM and marketing functions, companies can navigate complexities, capitalize on market opportunities, and sustain long-term success. The findings provide valuable insights for business leaders seeking to enhance marketing effectiveness through effective SCC strategies.

In today's globalized business environment, multinational corporations (MNCs) face significant challenges in achieving and sustaining effective supply chain integration across diverse cultural contexts. This qualitative research explores the influence of cultural factors on supply chain integration within MNCs, employing in-depth interviews and thematic analysis to uncover key insights. Findings reveal the complex interplay between culture and supply chain practices, highlighting challenges related to cross-cultural communication, trust-building, decision-making, and organizational culture alignment. However, the study also identifies opportunities for leveraging cultural diversity as a source of competitive advantage, emphasizing the importance of cultural intelligence and cross-cultural competence for supply chain professionals. The implications of the research extend to managerial practice, suggesting the development of culturally sensitive strategies for supply chain integration and investment in cultural training and development programs. Moreover, the study underscores the need for a holistic approach to supply chain integration that considers not only technical and operational aspects but also cultural and social dimensions. While the research offers valuable insights, limitations such as the qualitative nature of the study and the focus on supply chain managers' perspectives should be considered. Future research could address these limitations and explore the interdependencies among various contextual factors to enhance our understanding of cultural influences on supply chain integration in MNCs.

This study focuses on enhancing controllable fibrin-based hydrogels for tissue engineering, addressing existing weaknesses. By integrating a novel copolymer, we improve the foundation for cell-based angiogenesis with adaptable structural features. Tissue engineering often faces challenges like waste disposal and nutrient supply beyond the 200 µm diffusion limit. Angiogenesis breaks through this limitation, allowing the construction of larger constructs. Our innovative scaffold combination significantly boosts angiogenesis, resulting in longer branches and more capillary network junctions. The copolymer attached to fibrin fibers enables precise adjustment of hydrogel mechanical-dynamic properties for specific applications. Our material proves effective for angiogenesis, even under suppression factors like suramin. In our study, we prepared fibrin-based hydrogels with and without the copolymer PVP12400-co-GMA10mol%. Using a co-culture system of human umbilical vein endothelial cells (HUVEC) and mesenchymal stem cells (MSC), we analyzed angiogenetic behavior on and within the modified hydrogels. Capillary-like structures were reproducibly formed on different surfaces, demonstrating the general feasibility of three-dimensional endothelial cell networks in fibrin-based hydrogels. This highlights the biomaterial's suitability for in vitro pre-vascularization of biohybrid implants.

The qualitative research on the influence of supply chain risk management (SCRM) on marketing strategies during economic uncertainty explores the complex interplay between these two critical areas. Conducted through in-depth interviews with industry professionals across various sectors, the study examines how organizations manage supply chain risks and adapt their marketing strategies in response to challenges such as natural disasters, geopolitical tensions, economic downturns, and pandemics. The findings reveal that these risks significantly impact marketing efforts by causing supply shortages, delays, increased costs, and demand fluctuations, necessitating rapid adjustments in promotional activities, pricing strategies, and communication with customers. Key strategies for integrating SCRM with marketing include leveraging technology for real-time supply chain monitoring, building strong supplier relationships, diversifying supply sources, and enhancing communication and collaboration between supply chain and marketing teams. These practices enable organizations to enhance their resilience and responsiveness, ensuring that marketing strategies are aligned with the evolving realities of the supply chain. The study also identifies challenges such as organizational silos, lack of cross-functional collaboration, resistance to change, and limited technological capabilities, which can hinder effective integration. Addressing these barriers through fostering collaboration, investing in technology, and promoting change management is essential for achieving successful integration. The outcomes of this integration include improved supply chain resilience, enhanced customer satisfaction, increased marketing agility, and a stronger competitive position. The research underscores the importance of a holistic and adaptive approach to integrating SCRM with marketing strategies, providing valuable insights for organizations seeking to navigate economic uncertainty and sustain their growth in a rapidly changing environment.

This article presents a comprehensive study on enhancing grid resilience through advanced forecasting and optimization techniques in the context of power outages. Power outages pose significant challenges to modern societies, affecting various sectors such as industries, households, and critical infrastructures. The research combines statistical analysis, machine learning algorithms, and optimization methods to address this issue to develop a holistic approach for predicting and mitigating power outage events. The proposed methodology involves the use of Monte Carlo simulations in MATLAB for future outage prediction, Long Short-Term Memory (LSTM) networks for forecasting solar irradiance and load profiles, and a hybrid LSTM-Particle Swarm Optimization (PSO) model to improve accuracy. Furthermore, the role of Battery State of Charge (SoC) in enhancing system resilience is explored. The study also assesses the techno-economic advantages of a grid-tied microgrid integrated with solar panels and batteries over conventional grid systems. The results highlight the potential of the proposed approach in strengthening grid resilience, reducing downtime, and fostering sustainable energy utilization.

Effective management of supplier relationships is crucial for e-commerce companies to navigate complex supply chain dynamics and mitigate risks associated with supplier disputes. This qualitative study explores the strategies and challenges involved in resolving supplier disputes through relationship management in the context of e-commerce. Through semi-structured interviews with supply chain managers, procurement officers, and executives from diverse e-commerce firms, the study investigates key themes including communication strategies, trust-building initiatives, negotiation dynamics, technological integration, organizational culture, and global supply chain alignment. Findings reveal that clear and transparent communication plays a foundational role in preventing misunderstandings and fostering collaboration with suppliers. Trust-building initiatives, such as consistency in commitments and transparency in business dealings, are essential for cultivating resilient supplier relationships. Negotiation strategies emphasizing principled negotiation and collaborative problem-solving facilitate the resolution of disputes while preserving long-term partnerships. Technological integration through data analytics, automation, and digital platforms enhances operational efficiency and decision-making capabilities in managing supplier relationships. Organizational culture characterized by collaboration, innovation, and leadership commitment to strategic alignment with global supply chains promotes resilience and responsiveness to market dynamics. Challenges including power dynamics, operational constraints, and cultural differences underscore the importance of proactive risk management and cultural sensitivity in supplier relationship management. This study contributes actionable insights for practitioners to enhance supplier relationship management practices, navigate disputes effectively, and foster sustainable competitive advantage in e-commerce. By integrating these findings into strategic planning, e-commerce firms can strengthen supplier partnerships, optimize supply chain performance, and mitigate risks in a dynamic business environment.

There have been multiple technological advancements that promise to gradually enable devices to measure and record signals with high resolution and accuracy in the domain of Brain Computer Interfaces (BCI). This review paper provides a comprehensive overview of fNIRS, EEG, and fMRI, including their principles, advantages, limitations, and integration with other modalities for advanced BCIs. The paper highlights the advantages of integrating multiple modalities, such as increased accuracy and reliability, and discusses the challenges and limitations of multimodal integration. Applications of advanced BCIs in clinical, assistive, gaming, and entertainment domains are also discussed. Furthermore, we explain the data acquisition approaches for each of these modalities. We also demonstrate various software programs that help in extracting, cleaning, and refining the data. We conclude this paper with discussion on the available literature on data acquisition approaches and a comparison of the ease of use for each of the modalities.

The integration of deep learning models into financial risk prediction and analysis has significantly transformed traditional approaches. While conventional quantitative methods often rely on simplistic metrics like maximum drawdown, the advent of deep learning necessitates a more nuanced evaluation, emphasizing the model's generalization ability, especially during market crises such as stock market crashes. This paper explores the critical aspects of evaluating deep learning models' risk control capabilities in finance, underscoring the importance of understanding both statistical metrics and generalization abilities, particularly in adverse market conditions. By examining deep learning models' performance in scenarios like stock market crashes and highlighting the significance of cross-validation techniques, this study aims to offer practitioners insights into constructing robust risk management systems. It advocates for a comprehensive approach integrating quantitative analysis with macroeconomic factors to enhance financial risk prediction and analysis in volatile markets. The experimentation reveals that different deep generative models excel in various aspects of financial time series analysis, with generative adversarial networks (GANs) demonstrating superior performance in predicting Value at Risk (VaR) and variational autoencoders (VAEs) excelling in return rate prediction. Moreover, integrating multiple models further enhances predictive performance, leveraging the strengths of each model to compensate for individual weaknesses. Overall, this paper underscores the potential and significance of deep generative models in financial time series analysis, offering a roadmap for improved risk management and decision-making in financial markets.

This study investigates the impact of financial integration on international dynamics from the perspective of volatility shocks. To achieve this, I employ an IRBC model with time-varying volatilities, recursive preferences, and a global bank. The model demonstrates that volatility shocks trigger precautionary saving incentives, but the specific effects vary based on the type of shock. In the presence of productivity volatilities, countries with a higher level of financial integration exhibit greater divergence in their business cycles, while financial integration tends to result in more synchronized business cycles in the face of financial volatilities. Disregarding volatility shocks would underestimate the impact of financial integration on the comovement of business cycles across countries. Furthermore, welfare analysis also indicates that financial markets play a crucial role in enhancing social welfare, regardless of the type of volatility.

This paper deals with the analysis of trends in road accidents on major highways in Brazil. Using updated time series techniques, our results indicate that a low degree of long memory was detected in the series with shocks having transitory effects over time. We further find that the number of accidents taking place in Brazil has been reducing over time, though in the presence of negative shocks, the recovery is not going to be immediate due to the long memory nature of the data. Despite the absence of relevant investment relating to infrastructure expansion, it is worth mentioning the consolidation of a nationwide tolled road system in Brazil involving concessions to private administrators, alongside more severe traffic laws that can impose limitations on driving licences.

Background: In an age where information is generally accessible, most of the interest these days has focused on how accessible and convenient technology can be. So small and personal, mobile devices can transform our perception of learning by combining both mobility and convenience. Mobile learning is part of the digital learning landscape alongside e-learning and serious games. However, knowledge about effective design of mobile learning experiences remains of interest with a focus on appropriate design models and the embodiments that can be implemented to achieve the intended educational outcomes. Exploring the instructor's perspective on mobile learning is essential. Therefore, the aim of this study was to investigate the Moroccan instructors' perception and practice of mobile learning to inform the development of an ecologically valid mobile learning integration model. Methods: Higher education Instructors (n=41) were recruited to the study. The Moroccan instructors' perception and their experiences regarding their adoption of mobile learning were collected using an online survey. The analysis focused on their mobile use, perceived IT competency, and opinions on mobile learning. Results: We described most of the instructors' considerations regarding integrating mobile technologies into their teaching activities. We found that most of the mobile learning activities defined by the respondents corresponded to relatively advanced use of mobile devices. More promising, instructors have found innovative ways to use the educational potential of mobile devices. However, the prospect of mobile devices was still to challenge. No or poor Wi-Fi connection, number of devices or limited access, sometimes fees or applications incompatibility were identified as reasons and obstacles to mobile learning usage. Conclusion: Mobile learning is mostly perceived positively among Moroccan instructors allowing many applications and usage to enhance teaching and learning. In this study, a better understanding of aspects and factors influencing the integration of mobile learning in the Moroccan educational context is exposed, helping further the development of an ecologically valid mobile learning integration model. Future work on mobile learning should consider the highly paced evolution of mobile technologies, emphasizing the flexibility of integration frameworks to support instructors and learners.

In the information age today, data are getting more and more important. While other industries achieve tangible improvement by applying cutting edge information technology, the construction industry is still far from being enough. Cost, schedule, and performance control are three major functions in the project execution phase. Along with their individual importance, cost-schedule integration has been a significant challenge over the past five decades in the construction industry. Although a lot of efforts have been put into this development, there is no method used in construction practice. The purpose of this study is to propose a new method to integrate cost and schedule data using big data technology. The proposed algorithm is designed to provide data integrity and flexibility in the integration process, considerable time reduction on building and changing database, and practical use in a construction site. It is expected that the proposed method can transform the current way that field engineers regard information management as one of the troublesome tasks in a data-friendly way.

Background: Recent work has investigated significant force transmission between the compo-nents of myofascial chains. Misalignments in the body due to fascial thickening and shortening can therefore lead to complex compensatory patterns. For the treatment of such nonlinear cause-effect pathology, a comprehensive neuro-musculoskeletal therapy such as the Rolf Meth-od of Structural Integration (SI) could be targeted. Methods: A total of 727 subjects were retro-spectively screened from the medical records of an SI practice over a 23-year period. 383 subjects who had completed 10 basic SI sessions met eligibility criteria and were assessed for active range of motion (AROM) of the shoulder and hip before and after SI treatment. Results: Shoulder flex-ion, external and internal rotation, and hip flexion improved significantly (all p < 0.0001) after 10 SI sessions. Left shoulder flexion and external rotation of both shoulders increased more in men than in women (p < 0.0001), but were not affected by age. Conclusions: SI intervention produces multiple changes in the components of myofascial chains that could help maintain upright pos-ture in humans and reduce inadequate compensatory patterns. SI affects differently the outcome of some AROM parameters in women and men.

Research into the neurobiological and psychosocial mechanisms involved in fibromyalgia (FM) has progressed remarkably in recent years. Despite this, currents accounts of FM fail to capture the complex, dynamic and mutual crosstalk between neurophysiological and psychosocial domains. We conducted a comprehensive review of the existing literature in order to synthesise current knowledge on FM, explore and highlight multi-level links and pathways among different systems and build bridges between existing approaches. An extensive panel of international experts in neurophysiology and psychosocial aspects of FM discussed the collected evidence and progressively refined and conceptualized its interpretation. Fibromyalgia is a complex condition resulting from the dynamic interplay between multiple systems and processes. We provided an updated overview of the most relevant observations in FM to date as well as the potential pathways by which they exert they are related and exert their mutual influence, to produce the manifestations commonly associated with FM. This review constituted the first step towards and supported the development of a much needed model capable of integrating the main factors implicated in FM into a single, unified model that may prove valuable in understanding and managing FM.

This study selected the Yangtze River Delta urban agglomeration as the research area, combining it with the current situation of the transportation development of the Yangtze River Delta urban agglomeration to construct the urban agglomeration transportation integration index system and evaluate the development status of the Yangtze River Delta urban agglomeration transportation integration. The study examined the influence mechanism of transportation infrastructure on service industry agglomeration. The results are as follows: (1) From 2011–2020, the Yangtze River Delta urban agglomeration’s transportation integration index showed a clear upward trend. (2)The development of transport integration in urban agglomerations has heterogeneous effects on local service agglomeration. The development of the integration level of local transportation has a certain inhibitory effect on the agglomeration of local service industry. The transportation integration of the Yangtze River Delta urban agglomeration plays an important role in promoting the agglomeration of local wholesale and retail industry, transportation, storage and postal services. (3) The transportation integration of urban agglomeration can affect the agglomeration of service industry through the knowledge spillover brought by the free flow of various factors. The knowledge spillover effect caused by local transportation integration can promote the agglomeration of local service industry to a certain extent. The Yangtze River Delta urban agglomeration needs to accelerate the construction of trans-provincial and trans-municipal transportation infrastructure, and further improve the connectivity level of the urban agglomeration, so as to promote the integrated development of high-quality transportation in the Yangtze River Delta urban agglomeration.

This study examines the differential impact of proactive and reactive job crafting behaviors on job well-being, drawing from the perspective of boundary theory. The increasing popularity of work connectivity behavior after-hours (WCBA) after work has attracted widespread attention from scholars on the relationship between WCBA and employee well-being. One view suggests that the impact of WCBA is negative, while another view suggests it is positive. Obviously, the impact of (WCBA) on well-being at work is still contradictory. To clarify the complexity of the impact of WCBA on well-being at work, based on boundary theory, we divided WCBA into proactive WCBA (PC) and reactive WCBA (RC), and examined the double-edged sword effect of WCBA on well-being at work, as well as the mediating mechanisms of job control and work-to-home conflict, and the moderated effects of boundary segmentation preferences. This study uses empirical sampling method to collect data from 125 employees for a period of five days for quantitative research. The results show that, first, PC has an inverted U-shaped effect on job control, and job control is negatively related to well-being at work. Thus the mediating effect of job control is significant. Second, RC has a negative impact on job control, and there is also a negative relationship between job control and well-being at work. Therefore, the mediating effect of job control is significant. Third, PC and RC are positively correlated with work-to-home conflict, and work-to-home conflict has a significant positive impact on well-being at work. Therefore, the mediating effect of work-family conflict is significant. Fourth, the study also found that integration preference moderates the relationship between work-to-home conflict and PC on well-being at work, that is, the mediating effect of work-to-home conflict is stronger for employees with low integration preference. This study enriches our understanding of WCBA, PC and RC from the perspective of proactive and passive employee behaviors. The study also provides a new interpretation of the impact of WCBA on well-being at work and offers valuable insights for the sustainable development in digital social transformation and the application of boundary theory and the theory of empowerment-subjugation in achieving the United Nations Sustainable Development Goals. In addition, the study deepens our understanding of the heterogeneous regulatory role played by work-family integration preferences in influencing well-being at work under different types of WCBA.

Mutation in the ethionamide (ETH) activating enzyme, EthA, is the main factor determining resistance to this drug, used to treat TB patients infected with MDR and XDR Mycobacterium tuberculosis isolates. Many mutations in EthA of ETH resistant (ETH-R) isolates have been described but their roles in resistance remain uncharacterized, partly because structural studies on the enzyme are lacking. Thus, we took a two-tier approach to evaluate two mutations (Y50C and T453I) found in ETH-R clinical isolates. First, we used a combination of comparative modeling, molecular docking, and molecular dynamics to build an EthA model in complex with ETH that has hallmark features of structurally characterized homologs. Second, we used free energy computational calculations for the reliable prediction of relative free energies between the wild type and mutant enzymes. The ΔΔG values for Y50C and T453I mutant enzymes in complex with FADH₂-NADP-ETH were 3.34 (+/−0.55) and 8.11 (+/−0.51) kcal/mol, respectively, compared to the wild type complex. The positive ΔΔG values indicate that the wild type complex is more stable than the mutants, with the T453I complex being the least stable. These are the first results shedding light on the molecular basis of ETH resistance, namely reduced complex stability of mutant EthA.

Sensory processing is a crucial function of the nervous system that significantly affects a large portion of the population, particularly older individuals who may be dealing with different forms of dementia. The global population of people aged 65 or older has reached a substantial count of around 703 million, representing approximately 9% of the total global population. Within this demographic, an estimated 5-8% of those aged 60, highlighting the growing need to address sensory modulation challenges for healthy aging. Sensory diet, derived from sensory integration theory, provide a tailored approach to modulating sensory experiences and triggering neuroplastic changes in the brain. Recent neuroimaging studies have revealed intricate structural and functional alterations in the brain associated with the implementation of sensory diets. Furthermore, the integration of the Metaverse, augmented reality, and virtual reality has opened up personalized experiences, fostering cognitive stimulation and emotional well-being for individuals during aging. This article offers a comprehensive exploration of the effectiveness of sensory diets in enhancing attentional control, self-regulation, and alleviating sensory-related distress among the healthy aging and dementia population. By employing precise quantitative evaluations such as sensory processing scales and advanced neuroimaging methodologies, it presents solid evidence of the tangible impact of these interventions. Emphasizing the importance of interdisciplinary cooperation and leveraging technological advancements, the article underscores the crucial need for customized sensory diets to optimize sensory processing and improve the overall well-being of older individuals contending with sensory modulation challenges and dementia.

Human longevity is an important but difficult goal due to the extreme complication of human body. If people could repeatedly transfer their consciousness from old bodies to new ones, their lifespan might be prolonged extremely. However, there are several difficulties which prevent the achievement of such a technique. In this paper, we propose an approach that can transfer human consciousness indirectly, and avoid or significantly relieve those difficulties. The strategy of our approach is to integrate the consciousnesses of two bodies (old and new) into a unique consciousness. By doing so, the consciousness is extended to the new body. After that, the consciousness shrinks and remains in the new body when the old body dies. This may also apply to integrating more than two bodies of human, or animal, or even across different species. After investigating thousands of literatures, we find quite strong evidence (related discoveries and technologies) that can support the proposed approach and its advantages. Beside prolonging human lifespan, the approach could also have other meaningful applications.

Diseases of the lung account for more than 5 million deaths worldwide and are a burden to healthcare. Improving clinical outcomes including mortality and quality of life involves a holistic understanding the etiopathogenesis, which can be provided by multi-omics integration of lung data. An enhanced understanding of large comprehensive datasets provides opportunities to mine those datasets for features that contribute to prevention and amelioration of disease. In this review, we evaluate lung disease models including animal models, organoids and single cell lines as mechanisms to study multiomics in lung health and disease. We provide examples of lung diseases where multi-omics investigations have provided a deeper insight into pathogenesis that has resulted in improved preventive and therapeutic interventions.

The reuse and integration of data give big opportunities, supported by the F.A.I.R. data principles. Seamless data integration from heterogenous sources has been interest of the geospatial community for long time. However, 3D city models, BIM and information supporting smart cities present higher semantic and geometrical complexity, which pose new challenges, never tackled in a comprehensive methodology. Building on previous theories and studies, this paper proposes an overarching workflow and framework for multisource (geo)spatial data integration. It starts from the definition of use case-based requirements for the integrated data, guides the analysis of integrability of the involved datasets, suggesting actions to harmonise them, until data merging and validation. It is finally tested and exemplified on a case study. This approach allows the development of consistent, well-documented and inclusive data integration workflows, for the sake of use cases automation in various geospatial domains and the production of Interoperable and Reusable data.

Stock assessment determines the status of fishery stock to support manage- ment decision making. Considering the iterations between exploratory cal- culations and the need to compare outputs to elicit better model settings, we should focus on not only the accuracy of abundance estimation and the toler- ance of uncertainty but also the efficiency of the project workflow. Although in Japan, a stock assessment model was introduced written in the R language in 2012, the workflow did not sufficiently adjust, creating problems because the current workflow is contrary to the principles of effective value creation. To make our project sustainable, we propose adopting the agile methodol- ogy, an iterative development method used by software developers, for stock assessment. Therefore, we wrote an example report as a package document in the R language. Developed under a continuous integration environment, the report remains up to date, with every modification on component files. This method enabled our work to be efficient and transparent by allowing and documenting scenario branching, error corrections, and annual updates. We show that the iterative development cycle benefit us by allowing us to focus on the essential business problem of the assessment project.

As Solar Photovoltaics in buildings reaches maturity, grid integration and economic yield are topics of greater interest. The traditional design of photovoltaic installations has considered the optimal orientation of photovoltaic modules to be that which yields the maximum annual energy production. The influence of the consumption patterns and the hourly-variable electricity prices implies that this traditional optimal design might not be the most profitable. Using a full-year dataset for a residential installation, alternative installations using canopies and modules attached to the façades are simulated. Simulating the energy balances for different annual consumptions, it is found that the canopy and façade installations offer better self-consumption of the PV produced energy, reflected in a 9% higher self-consumption degree using modules on façades and a 5% using canopies. The economic evaluation under the new electricity tariffs in Spain shows a better profit for PV self-consumption, reducing by more than 2 years the time of return on investment. The analysis of different alternatives for an industrial PV has allowed us to identify several benefits for these orientations, such as an increase in annual energy production of up to 59% over the optimal-producing orientation, that are confirmed after several months of operation.

Supplier Relationship Management (SRM) is a critical aspect of supply chain management, particularly in today's dynamic and interconnected business environment. This qualitative research study explores SRM practices within the context of supply chain dynamics, aiming to understand how organizations manage their supplier relationships to achieve strategic objectives. Through semi-structured interviews, document analysis, and participant observation, key themes emerge, including collaboration, trust, risk management, performance measurement, digital technology integration, sustainability, cultural alignment, supplier development, strategic alignment, emotional intelligence, and marketing perspectives. The findings underscore the importance of collaboration and trust in fostering strategic partnerships with suppliers, mitigating risks, and enhancing supply chain resilience. Effective risk management practices, performance measurement systems, and digital technology integration are essential for improving transparency, efficiency, and responsiveness in SRM. Sustainability considerations highlight the need for aligning SRM practices with corporate social responsibility goals and stakeholder expectations. Cultural alignment, supplier development programs, strategic alignment, emotional intelligence, and marketing perspectives further enrich the understanding of how organizations navigate their supplier relationships. This study contributes to the body of knowledge on SRM by providing empirical insights into the practices, challenges, and opportunities associated with managing supplier relationships in dynamic supply chains. The findings offer valuable guidance for practitioners and policymakers seeking to enhance their SRM practices and achieve competitive advantage in today's complex business landscape.

Infectious illnesses have always posed a threat to human health, with tuberculosis (TB) being a major concern. The use of various medications and antibiotics in the fight against such illnesses has led to the emergence of drug-resistant infectious diseases, which have become increasingly dif-ficult to manage as medical and scientific research has advanced. Inadequate medical infrastruc-ture, incorrect treatment practices that exacerbate resistance patterns, and transmission within communities and healthcare facilities are the main factors contributing to the spread of drug-resistant TB. Though treating individuals with multiple drug resistance (MDR) and extreme drug resistance (XDR) strains is challenging, early identification of resistance and the imple-mentation of a well-designed treatment regimen can result in a cure. Community-based inter-ventions that address socioeconomic barriers to adherence can also enhance treatment outcomes. While there have been few studies and proposed conceptual models on how to manage and prevent various drug-resistant TB mutations and lineages, a model aimed at limiting and controlling such mutations has been developed. This paradigm seeks to bridge the gap by facilitating the exchange of knowledge among healthcare professionals (HCP) in healthcare facilities (HCF), diagnostic laboratories (DL), and research institutes (RI), particularly for underprivileged communities in the Eastern Cape. The model guide will also monitor and evaluate TB management plans

In this work we derive a generalized series expansion of the acrtangent function by using the enhanced midpoint integration (EMI). Algorithmic implementation of the generalized series expansion utilizes a simple two-step iteration. This approach significantly improves the convergence and requires no surd numbers in computation of the arctangent function.

The rapid development of information and communication technologies has led to the use of new and digital technologies in education which involves combinations of text, graphics, audio, video, animations and other eLearning resources such as authoring tools, Learning Management System (LMS), Mobile learning and others. Arguably, using LMS leaves much to be desired. The inherent problem here is that the future of extensive adoption of ICT via LMS to enhance and promote classroom interaction in Open and Distance Learning (ODL) is bleak. This is worrisome given that the country is lagging far behind in the innovative use of this web 2.0 technology to impart knowledge. Further, the low-level application of LMS in instruction connotes the loss of inherent advantages in its adoption. Also, the online setting which makes students less nervous and interactive, sharing of ideas and viewpoints; and a host of other benefit will be lost. While evidence has shown that LMS is not a new phenomenon, the use of LMS in ODL is still at its infancy, particularly in Nigeria. Research in this area is rare. A quick search on prominent research databases could testify that. It is on this thrust that this study investigates University of Ibadan undergraduate students’ perceived roles and readiness towards integration of learning management system into teaching and learning.

The present paper deals with the investigation, at conceptual level, of the performance of short-medium-range aircraft with hydrogen propulsion. The attention is focused on the relationship between figures of merit related to transport capability, such as passenger capacity and flight range, and the parameters which drive the design of liquid hydrogen tanks and their integration with a given aircraft geometry. The reference aircraft chosen for such purpose is a box-wing short-medium-range airplane, object of study within a previous European research project called PARSIFAL, capable to cut the fuel consumption per passenger-kilometre up to 22%. By adopting a retrofitting approach, non-integral pressure vessels are sized to fit into the fuselage of the reference aircraft, under the assumption that the main aerodynamic, flight mechanic and structural characteristics are not affected. A parametric model is introduced to generate a wide variety of fuselage-tank cross-section layouts, from a single tank with the maximum diameter compatible with a catwalk corridor to multiple tanks located in the cargo deck , and an assessment work-flow is implemented to perform the structural sizing of the tanks and analyse their thermodynamic behaviour during the mission. This latter is simulated with a time-marching approach that couples the fuel request from engines with the thermodynamics of the hydrogen in the tanks, which is constantly subject to evaporation and, depending on the internal pressure, vent-ed-out in gas form. Each model is presented in detail in the paper and results are provided through sensitivity analyses to both the technology parameters of the tanks and the geometric parameters influencing their integration. The guidelines resulting from the analyses indicate that light materials, such as the Aluminium alloy AA2219 for tanks’ structure and polystyrene foam for the insulation, should be selected. Preferred values are also indicted for the aspect ratios of the vessel components, i.e. central tube and endcaps, as well as suggestions for the integration layout to be adopted depending on the desired trade-off between passenger capacity, as for the case of multiple tanks in the cargo deck, and achievable flight ranges, as for the single tank in the section.

The Fergana Valley, a strategically significant and culturally rich region in Central Asia, exemplifies the complex interplay of modern international relations amidst geopolitical and ethno-cultural integration. This paper explores the fundamental principles guiding international interactions in the valley, considering the historical context, current geopolitical dynamics, and the unique cultural mosaic of its population. Key themes include the impact of regional power shifts, the role of transnational organizations, and the influence of ethno-cultural identities on diplomatic engagements. By analyzing case studies of cooperation and conflict, the paper highlights how integration efforts shape political stability, economic development, and social cohesion in the Fergana Valley. This study aims to provide a nuanced understanding of the region's international relations framework, offering insights into effective strategies for fostering harmonious and sustainable integration in a geopolitically sensitive and culturally diverse landscape.

Over the last decade, there has been a renewed interest in oral health workforce planning. The purpose of this review is to examine oral health workforce planning models on supply, demand and needs, mainly in respect to their data sources, modelling technique and use of skill mix. A search was carried out on PubMed, Web of Science, and Google Scholar databases for published scientific articles on oral health workforce planning models between 2010 to 2020. No restrictions were placed on the type of modelling philosophy, and all studies including supply, demand or needs based models were included. Rapid review methods guided the review process. Twenty-three studies from 15 different countries were included in the review. A majority were from high income countries (n=17). Dentists were the sole oral health workforce group modelled in 13 studies; only five studied included skill mix (allied dental personnel) considerations. The most common application of modelling was a workforce to population ratio or a needs-based demand weighted variant. Nearly all studies presented weaknesses in modelling process due to the limitations in data sources and/or non availability of necessary data to inform oral health workforce planning. Skill mix considerations in planning models were also limited to horizontal integration within oral health professionals. Planning for the future oral health workforce is heavily reliant on quality data being available for supply, demand and needs models. Integrated methodologies that expand skill mix considerations and account for uncertainty are essential for future planning exercises.

Structure - function interdependence is a universal phenomenon in biological systems. Any alteration in structural features may result in change in functions–leading to natural selection of a particular trait, or dysfunctions thereof. Many such alterations arise during the course of evolution of a species and may meticulously be traced during embryonic development of an organism. Through the theoretical construct of morphological integration, a set of phenotypic traits alter in a coordinated and integrated manner during evolution and embryonic development of an organism yielding efficient environmentally adapted physiological functions pertinent to those structures. Such integration may go awry sometimes, setting the basis for genesis of diseases. Morphological integration in human skull has been established through various methods. The brain-skull co-development is handcuffed through evolution and development, and the very basis of a neuro-psychiatric disorder could be underlying in dysmorphogenesis of the skull, its consequent effect on structures, and thus functions of the pertinent brain components. Here we propose that morphological integration in human skull may be mechanistically implied in etiogenesis of certain neuro-psychiatric disorders and should be borne in mind during clinical diagnosis and therapeutic interventions.

(1) Background: With continuous globalization and modernization of people's lives, lifestyle has changed dramatically, with decreased physical activity and increased unhealthy eating patterns in many nations throughout the world. With the COVID-19 pandemic and changes taking place in people’s health and lifestyles around the world, the need for rehabilitation is expected to rise in the coming years.(2)Methods: This paper analyzes the integration model of sports and health care using theoretical analysis, literature reviews, logical reasoning, and other methods.(3)Results: The integration of sports and health care in China has entered the stage of practical implementation after many years of development, forming a few representative integration patterns. Governments, communities, community hospitals, hospitals, and third-party institutions are the main participants, with the community playing an important role in the integration. Pharmacies, sports venues, and schools with sufficient staff have a relatively low participation rate.(4)Conclusion: The grading treatment has been applied in health management and sports rehabilitation, based on the development of digital medicine, a government-led grading treatment model of "health management center" can promote the participation of multiple subjects in the integration of sports and health care, solving the problems existing in the current integration process to a certain extent.

Viral integration within the host genome plays a pivotal role in carcinogenesis. Various disruptive mechanisms are involved, leading to genomic instability, mutations, and DNA damage. With next-generation sequencing (NGS), we can now precisely identify viral and host genomic breakpoints and chimeric sequences, which are useful for integration site analysis. In this study, we evaluated a commercial hybrid-capture NGS panel specifically designed for detecting three key viruses: HPV, HBV, and HIV-1. We also tested workflows for Viral Hybrid Capture (VHC) and Viral Integration Site (VIS) analysis, leveraging customized viral databases in CLC Microbial Ge-nomics. By analyzing sequenced data from virally infected cancer cell lines (including SiHa, HeLa, CaSki, C-33A, DoTc2, 2A3, SCC154 for HPV; 3B2, SNU-182 for HBV; and ACH-2 for HIV-1), we precisely pinpointed viral integration sites. The workflow also highlighted disrupted and neigh-boring human genes that may play a crucial role in tumor development. Our results included in-formative virus-host read mappings, genomic breakpoints, and integration circular plots. These visual representations enhance our understanding of the integration process. In conclusion, our seamless end-to-end workflow bridges the gap in understanding viral contributions to cancer development, paving the way for improved diagnostics and treatment strategies.

Big Data warehouses are a new class of databases that largely use unstructured and volatile data for analytical purpose. Examples of this kind of data sources are those coming from the Web, such as social networks and blogs, or from sensor networks, where huge amounts of data may be available only for short intervals of time. In order to manage massive data sources, a strategy must be adopted to define multidimensional schemas in presence of fast-changing situations or even undefined business requirements. In the paper, we propose a design methodology that adopts agile and automatic approaches, in order to reduce the time necessary to integrate new data sources and to include new business requirements on the fly. The data are immediately available for analyses, since the underlying architecture is based on a virtual data warehouse that does not require the importing phase. Examples of application of the methodology are presented along the paper in order to show the validity of this approach compared to a traditional one.

This comprehensive research investigates the multifaceted role of integration in modern education systems, aiming to advance educational equity and inclusivity.Introduction: The introduction sets the stage by delineating the historical evolution of integration in education, highlighting pivotal milestones, and contextualizing the current discourse on fostering inclusive learning environments.Materials and methods: This section details the research design, participant selection criteria, and data collection methods. By employing a mixed-methods approach, combining surveys, interviews, and observations, the study seeks to capture the complexities of integration. Results: Presenting the results entails a meticulous examination of the impact of integration on academic outcomes and social dynamics within educational settings. Statistical analyses and qualitative insights converge to reveal the nuanced relationships between integration practices and student experiences. Discussion: The discussion section critically analyzes the findings in the context of existing literature, offering insights into the broader implications of integration. By addressing challenges and barriers identified during the study, the discussion aims to guide educators, administrators, and policymakers in navigating the complexities of integrating diverse student populations effectively. Conclusions: The concluding section synthesizes the key findings, emphasizing their significance in advancing educational equity through integration. Recommendations are made for educators, policymakers, and researchers to leverage the transformative potential of integration. The section acknowledges study limitations, calls for future research directions, and concludes with a resounding commitment to fostering an inclusive educational system that reflects the principles of equity and social justice.

Collaboration with data scientists is explored as a key aspect, emphasizing synergies between roles. Real-world case studies and best practices offer tangible insights, guiding analysts in successful AI implementation. The resource advocates for a mindset of continuous learning, providing a roadmap for gradual AI integration into analysis processes. Ultimately, the goal is to equip analysts with the knowledge and tools needed to elevate their analytical capabilities through the strategic adoption of AI.

Abstract: Building Information Modelling (BIM) methodology has been empowering the quality of the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggre-gates several disciplines and different professional skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. This professional can access to the distinct discipline models, located in a shared platform, and request for amendments if inconsistencies are detected. The topic of the present study is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and con-struction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are still limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM has been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. The present study put in evidence the BIM manager role in pro-jects that aggregates several disciplines and experts, bringing an important contribution in the quality of a building design. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects.

We select four important waves of new entrants that knocked on the door of European electricity markets to illustrate how market rules need to be continuously adapted to allow new entrants to come in and push innovation forward. The new entrants that we selected are utilities venturing into neighbouring markets after establishing a strong position in their home market, utility-scale renewables project developers, asset-light software companies aggregating the assets of smaller consumers and producers, and different types of communities. We show that well-intentioned rules designed for certain types of market participants can (unintentionally) become obstacles for new entrants. We conclude that the evolution of market rules illustrates the importance of dynamic regulation. At the start of the liberalisation process the view was that we would deregulate or re-regulate the sector after which the role of regulators could be reduced. But their role has only increased. New players might also present new risks that require intervention by regulators.

It is widely acknowledged that the integration of BIM and GIS data is a crucial step forward for future 3D city modelling, but most of the research conducted so far has covered only the semantic aspects of GIS-BIM integration. We present here the results of the GeoBIM project, in which we tackled three integration problems focussing instead on aspects involving geometry processing: (i) the automated processing of complex architectural IFC models, (ii) the integration of existing GIS subsoil data in BIM, and (iii) the georeferencing of BIM models for their use in GIS software. All the problems have been studied using real world models and existing datasets made and used by practitioners in the Netherlands. For each problem, we expose in detail the issues we faced, our proposed solutions, and our recommendations for a more successful integration.