We document for the first time epsilon waves on the electrocardiogram of a patient with Dravet syndrome (DS) who does not exhibit structural cardiac pathology. DS, a severe form of pediatric epilepsy, involves mutations in the SCN1A gene, which disrupt sodium ion flow and increase the risk of sudden unexpected death in epilepsy. The epsilon waves, typically associated with arrhythmogenic right ventricular dysplasia, may also suggest a link between neuronal and cardiac dysfunctions. In our case, the epsilon waves appear to originate from abnormalities in sodium channels rather than structural changes in the myocardium. This finding underscores the importance of assessing both neurological and cardiac manifestations in patients with severe epilepsy, opening new avenues for the research and treatment of these interactions in DS.

Input noise causes inescapable bias to the weight vectors of the adaptive filters during the adaptation processes. Moreover, the impulse noise at the output of the unknown systems can prevent bias compensation from converging. This paper presents a robust bias compensation method for a sparse normalized quasi-Newton least-mean (BC-SNQNLM) adaptive filtering algorithm to address this issue. We have mathematically derived the biased-compensation terms in an impulse noisy environment. Inspired by the convex combination of adaptive filters' step sizes, we propose a novel variable-mixing-norm method to accelerate the convergence for our BC-SNQNLM algorithm, which is referred to as BC-SNQNLM-VMN. Simulation results confirm that the proposed method significantly outperforms other comparative works regarding normalized mean-squared deviation (NMSD) in the steady state.

Abstract: The objective of these studies was to determine the dependence of the distribution of the microwave field into a grain layer and the efficiency of energy transfer from the magnetron into the grain layer, via a waveguide, on the moisture content. The subject of the research was a semicircular waveguide with slot radiators that supply a microwave field to the grain surrounding the waveguide. The change in the directional diagram of the microwave field in the longitudinal direction of the waveguide was studied using CST Microwave Studio 2019 software. It was found that the change in the moisture content of the processed grain leads to a significant change in both the radiation and total efficiency values of the waveguide. For instance, the radiation efficiency of the waveguide decreases by 15.1% (from 68.729 dB to 58.294 dB) when the moisture content of the processed grain increases from 14% to 26%. The total radiation efficiency also decreases (from 11.27 dB to 21.7 dB). In this case, not only the value of the radiation efficiency but also the shape of its dependence on the magnetron radiation frequency change. Data were obtained on the change in the Q-factor for resonators in which grain layers are processed, depending on the variation in grain moisture content.

Hypertension is one of the most common primary cardiometabolic diseases and is a major contributor to cardiac mortality and morbidity. Furthermore, cardiac risk factors such as obesity and sedentary lifestyle are often seen in hypertensive patients. Regular exercise acts against these risk factors and improves the overall health of an individual. High-intensity interval training appears to do so in a more efficient way. We used a systematic literature review (SLR) approach to provide an overview of the present literature highlighting the cardiovascular advantages of HIIT in hypertensive individuals. We reviewed 4004 articles from reputable journals published between 2013 and August 14, 2023, focusing on 7 selected papers for in-depth analysis. This systematic review revealed the protective effects of HIIT against cardiac complications in hypertension. All the reviewed articles showed a decrease in blood pressure and many other risk variables of cardiovascular diseases. However, guidelines for this exercise are needed for maximum benefits. Therefore, further research on HIIT is necessary to fully harness its potential.

The study of angular correlations of heavy-flavor particles in hadronic collisions can provide crucial insight into the heavy-quark production, showering and hadronization processes. The comparison with model predictions allows us to discriminate among different approaches for heavy-quark production and hadronization, as well as different treatments of the underlying event employed by the models to reproduce correlation observables. In ultra-relativistic heavy-ion collisions, where a deconfined state of matter, the quark-gluon plasma (QGP), is created, heavy-flavor correlations can shed light on the modification of the heavy-quark fragmentation due to interaction of charm and beauty quarks with the QGP constituents, as well as characterize their energy loss processes while traversing the medium. Insight into possible emergence of collective-like mechanisms in smaller systems, resembling those observed in heavy-ion collisions, can also be obtained by performing correlation studies in high-multiplicity proton-proton and proton-nucleus collisions. In this review, the most recent and relevant measurements of heavy-flavor correlations performed in all collision systems at the LHC and RHIC will be presented, and the new understandings that they provide will be discussed.

Recruitment is a fundamental aspect of Human Resource Management to drive organizational performance. Traditional recruitment processes, with manual stages, are time-consuming and inefficient. Artificial Intelligence (AI), which demonstrates its potential in various sectors such as healthcare, education and notable cases of ChatGPT, is currently reshaping recruitment by automating tasks to improve efficiency. However, in Thailand, where there is a growing demand for talents, the application of AI in recruitment remains relatively limited. This research focuses on human resources (HR) and recruitment professionals in Thailand, aiming to understand their perspectives on the integration of AI in recruitment. It extended the Unified Theory for Acceptance and Use of Technology (UTAUT) model, customized to suit the specific requirements of Thai recruitment practices. The study explores the factors influencing users' intention to adopt AI in recruitment. Survey questionnaire items were created based on prior literatures and refined with insights from HR and recruitment experts to ensure applicability in the context of recruitment in Thailand. A survey involving 364 HR and recruiting professionals in Bangkok metropolitan area supplied comprehensive responses. The research reveals that several factors, including Perceived Value, Perceived Autonomy, Effort Expectancy, and Facilitating Conditions, significantly impact the intention to adopt AI for recruitment. While Social Influence and Trust in AI Technology do not have a direct influence on intention, Social Influence directly affects Perceived Value. Trust in AI Technology positively influences Effort Expectancy. This study provides valuable benefits for HR and recruitment professionals, organizations and AI developers by offering insights into AI adoption and sustainability, enhancing recruitment processes and promoting the effective use of AI tools in this sector.

Based on the multiple coordination framework of “promising government-effective market-ordered society”, this paper takes 68 cases of adding elevators to old buildings as samples, and selects six conditional variables: approval optimization, financial subsidies, financing innovation, technological innovation, capable people leading and neighborhood committee guidance. Using Crisp-Set Qualitative Comparative Analysis (csQCA), this paper discusses the combination of conditions that affect the success or failure. It is found that: approval optimization and neighborhood committee guidance are sufficient conditions for the success; successful cases can be divided into three types: “political and social dual-drive type”, “market and social dual-drive type” and “ternary co-drive type”; lack of approval optimization, lack of financing innovation, and the existence of capable people leading are necessary conditions for the failure. The failure cases can be divided into “government and market double failure type” and “market failure type”.

Background and Objective: Intimate relationships hold significant importance during emerging adulthood. This study aimed to investigate the critical determinants of perceived well-being in friendship relationships during emerging adulthood.Method: Using a quantitative approach, a sample of 726 undergraduate students from the Ferdowsi University of Mashhad were selected through convenience sampling. They completed the Interpersonal Behaviors Questionnaire (IBQ), the Compassionate and self-image goals scale (CSIGS), the Basic Need Satisfaction in Relationships Scale (BNS-RS), the Interpersonal Needs Questionnaire (INQ-10), Friendship Self-Regulation Questionnaire (SRQ-F), Interpersonal Behaviors Questionnaire-Self (IBQ-self), State Level Subjective Vitality Scale (SVS-SL), the Perceived Relationship Quality Component (PRQC), and the Basic Empathy Scale (BES). Data analysis was conducted using Partial Least Squares Structural Equation Modeling (PLS-SEM).Results: The results indicated that the critical determinants in predicting perceived well-being in friendship relationships were, in order, goals in friendship relationships, friendship self-regulation, perceived support of basic psychological needs by friends, satisfied basic psychological needs, frustrated psychological needs, and supporting the basic psychological needs of friends.Conclusion: The findings demonstrate that self-determination theory (SDT) provides a coherent framework for explaining perceived well-being in friendships.

An all-dielectric metasurface composed of orthogonal-slit silicon disks is proposed in this study. By modifying the unit structure of the metasurface with the bound states in the continuum (BIC) theory, a sharp Fano resonance can be generated. The resonance properties of the metasurface are investigated by analyzing the effects of the structural parameters on the resonance using the eigenmode analysis method. The Q factor and the resonance wavelength can be adjusted by varying the slit width, the disk thickness, and the disk radius. The electromagnetic characteristics and mechanism of the toroidal dipole-BIC (TD-BIC) are explored in depth through an analysis of the multipole expansion of the scattered power, along with the electromagnetic field and the current distribution at resonance. This research provides a novel approach for excitation of a strong TD-BIC resonance and proposes potential applications in optical switches, high-sensitivity optical sensors, and related areas.

: This article reports on polymer (PLLA, poly(L-lactic acid)) nanosheets incorporated with Fe-ion nanoparticles, aiming at using the latter nanoparticles as source to release Fe ions to facilitate burn wound healing when such nanosheets are applied on skin as biomedical tissue. Laser ablation in liquid phase was used to produce Fe-containing nanoparticles that after incorporation into PLLA nanosheets would release Fe ions when in immersed in water. Such nanoparticles prepared in chloroform are shown by XPS to be based on iron chloride and oxide phases. After incorporation into PLLA nanosheets, the ion –release test demonstrated that Fe ions could be released successfully into water at pH 7.4, which implies that such polymer nanosheets show promise for biomedical applications as potential patches for healing burn wounds. Incorporation with two different metal ions (Fe and Zn) is shown to be efficient and both types of ions were demonstrated to be released simultaneously and with comparable release rates.

Abstract: Background. The newer wireless portable scanners seem to permit a quicker bedside ultrasound (US) assessment, shortening the transfer times of the portable US unit and without the hindering of connection cables. However, no substantial evidence is currently available regarding of the clinical effectiveness of such new generation devices. Objective. The aim of the current study was to evaluate the efficacy of a wireless US system with respect to a high-end US unit in a cohort of consecutive respiratory patients. Materials and Methods. This prospective observational study included a total of 72 respiratory patients admitted in the department of Internal Medicine. The US examination were independently performed by two experienced blinded examiners with a high-end Esaote MyLab-Twice scanner and a wireless double-head linear and convex probe OTE-L/C501CD. The findings resulting from the high-end US assessment and the wireless US examination were then compared each other. All the patients had a confirmation chest CT scan. Results. The high-end US machine identified 64 positive cases for pleuro-pulmonary alterations, in comparison to which the wireless US unit resulted in 13 false negative results. The respective overall sensitivity and specificity for the portable wireless US unit were of 79.69% and 100.00%, respectively. The resolution of the portable wireless US device was judged as good in 22 (31%) cases, affected by minor diagnostic limitations in 26 (36%) cases and affected by major diagnostic limitations in 24 (33%). The main diagnostic strength of the wireless probe was in the detection of pleural effusion (sensitivity 100%). The diagnostic sensitivity of the wireless probe in assessing abnormalities of the pleural line (67%), pulmonary subpleural consolidations (65%), pleural lesions (33%) and pericardial effusion (0%) was reduced. Conclusions. The newer wireless US probes may have clinical roles for the detection and management of pleural effusion when used by experienced examiners. However, sensitivity in detecting other pleuro-pulmonary pathologies is not comparable to high-end ultrasound machines.

Antarctic krill protein-iron complex and peptide-iron complex were obtained to investigate their iron bioavailability, expression of iron-regulated genes, and in vivo antioxidant capacity. Results indicated that Antarctic krill peptide-iron complex increased significantly the hemoglobin (Hb), serum iron (SI) and iron content in the liver and spleen in iron-deficiency anemia (IDA) mice (P < 0.05) compared with those of Antarctic krill protein-iron complex. Despite the gene expressions of divalent metal transporter 1(DMT1), transferrin (Tf) and transferrin receptor (TfR) could be better regulated by both Antarctic krill peptide-iron complex and protein-iron complex, the relative iron bioavailability of the Antarctic krill peptide-iron complex group (152.53±21.05%) was significantly higher than that of the protein-iron complex group (112.75±9.60%) (P<0.05). Moreover, Antarctic krill peptide-iron complex could enhance the antioxidant enzyme activities of superoxidase dismutase (SOD) and glutathione peroxidase (GSH-Px), reduce the malondialdehyde (MDA) level in IDA mice compared with the protein-iron complex, reducing the cell damage caused by IDA. Therefore, these results demonstrated that Antarctic krill peptide-iron complex could be used as a highly efficient and multifunctional iron supplement.

Background Community health workers (CHWs) drawn from the general population are an important human resource in health care systems, preventing non-communicable diseases (NCDs) and contributing to an increase in healthy life expectancy in Japan. Thus, we have developed the COmmunity health workers perceptual and behavioral Competency Scale for preventing Non-communicable diseases (COCS-N) to measure CHWs’ competence in preventing NCDs. The purpose of this study is to examine individual and community factors affecting CHWs’ COCS-N scores. Methods Municipal public health nurses and other public health professionals are responsible for training and supporting CHWs in Japan. Therefore, the existence of CHWs and their willingness to participate in the study were confirmed with the municipalities, who were asked to distribute the self-administered questionnaire to CHWs where consent was obtained (N = 6,480). Variables used included demographic characteristics, COCS-N scores, and individual- and community-related factors. Logistic regression analysis was used to assess associations between variables. Results A total of 3,120 people completed the questionnaire, a valid response rate of 48.1%. The respondents’ mean age was 67.0 years (standard deviation = 9.0), and 88.0% were female. Comparison of the high- and low- competence groups in terms of NCD prevention based on COCS-N scores identified 13 factors associated with significant differences, including years spent working as a CHW (p < 0.001), subjective sense of health (p = 0.005), European Health Literacy Survey Questionnaire (HLS-EU-Q47) scores (p < 0.001), and community commitment scale (CCS) scores (p < 0.001). Logistic regression analysis revealed that HLS-EU-Q47 scores (odds ratio [OR]: 1.02, 95% confidence interval [CI]: 1.02–1.03) were a significant individual factor, while CCS scores (OR: 1.14, 95% CI: 1.11–1.16) were a significant community factor. Conclusions We found that the COCS-N score was associated with the individual factors overall health literacy (HL), perceptions of HL, and subjective sense of health, and with the community factor CCS scores. These results suggest that strengthening individual factors such as HL and subjective sense of health, and community factors such as sense of community is an effective strategy for increasing CHWs’ competence in preventing NCDs.

We report the isolation of two novel degrading bacterial strains active against the potential environmental pollutant acetamino-phen/paracetamol. Streptomyces Chrestomyceticus (RS2) and Streptomyces Flavofuscus (M33) collected from El-Natrun Valley, Egypt, water, sediment, and sand samples were taxonomically characterized via conidiophores morphologic characterization under Trans-mission Electron Microscope (TEM). Genotypic identification, done based on their 16S rRNA gene sequence analysis followed by BLAST alignment and deposited on the NCBI as 2 novel strains. The phylogenetic tree was constructed using an appropriate software. Acetaminophen degradation-products chemical structure was identified by GC/LC MS. The biological antimicrobial activity of some selected acetaminophen degradation-products extracts and derived compounds was examined against panel of test micro-organisms and found to be have high anti-microbial effect. In addition, in silico cheminformatics Swiss ADMET evaluation of these selected deg-radation extract for gastric absorption, distribution, hepatic metabolism, renal excretion as well as distribution to CNS and finally not mutagenic/teratogenic or genotoxic virtually. In vitro cytotoxic activity of these selected bio-degradation products was performed against HepG2 and MCF7 cancer cell lines, revealing that M33 and RS2 extract effect on acetaminophen/paracetamol bio-degradation products are potentially safe with higher IC50 on HepG2 and MCF7, in comparison to acetaminophen/paracetamol with IC50 of 108.5 μg/ml. Moreover, the in vivo acute oral single dose toxicity experiment was conducted, being compared with acetamino-phen/paracetamol to confirm that the bio-degradation products have lower toxicity than acetaminophen in vivo and in silico.

This paper estimates the effect of trust in government on rural residents’ contributions in China’s rural pension program using the Propensity Score Matching (PSM) method. We construct an analytical framework for rural residents' decision-making in pension program and provide analysis using data from China Family Panel Studies (CFPS) and 25 provincial Departments of the Human Resources and Social Security (DOHRSS) in China. Our analysis shows that rural residents’ trust in government will influence their contributions to the pension programs by affecting their expected return of the investments. Our results suggest that the government should improve rural residents’ trust in government in order to develop a successful and sustainable rural pension program.

The calculation of the exact value of the square root of 2 is requested. In order to obtain its infinite value, A new concept is proposed where the accumulations of the infinitely many of finity is indicated by the change in direction which means that there is a jump from finity to infinity .The meaningless for an infinite number with a decimal point is indicated by this jump because any decimal number only have meanings within a finite range values and there is only an infinite integer quantity that can not be operated by algorithms like operations of multiplication，division,addition, and subtraction . The final result of the change in direction is two quantity where the second quantity and the first quantity extend in parallel line and never intersect and the second quantity represent the size of the first quantity. The first quantity is the infinitely great that can't be talked about anything outside of it and can compress any quantities outside of it to nothing and it is the exact value of the square root of 2 .

Acute kidney injury (AKI) is a complication that can occur after cardiac surgery and requires ongoing research in light of the exponential expansion of technological advancements and knowledge in medicine. In this study, we aim to evaluate the outcomes of treated electives of emergency aortic disease with high serum creatinine levels (SCr). Methods: The cohort includes 183 patients, all of whom have an aortic disease and whose SCr levels were checked upon admission on the first day in the intensive care unit (ICU) and upon discharge from the hospital. We examined the correlation of SCr levels with in-hospital mortality and immediate mortality at least six months after discharge as well as with cross-clamp time and bypass time.Results: A high SCr level upon admission is a significant predictive factor of n-hospital mortality (p = 0.001) but not immediate mortality (p = 0.409). A statistically significant correlation was also observed between elevated SCr level on the first day of ICU and aortic disease (p = 0.041) but not immediate mortality (p = 0.119). We observed a significant correlation between aortic disease and in-hospital mortality (p < 0.001), but no correlation was found between high SCr level on the first day of ICU and immediate mortality (p = 0.119). The cross-clamp time is statistically significant correlated with elevated SCr level (p = 0.013) and in-hospital mortality (p = 0.001) but not immediate mortality (p = 0.847). Furthermore, the bypass time is negatively correlated with a high SCr level on the first day of ICU (p = 0.090), in-hospital mortality (p = 0.410), and immediate mortality (p = 0.625). We also found that aortic disease is not correlated with elevated creatinine levels at ICU discharge (p = 0.152) or long-term mortality (p = 0.106). Conclusions: Although this study only included a small portion of the elaborate aspects of surgical and medical management developed around cardiac patients who received invasive treatment, the conclusions reached are nevertheless clearly relevant, as evidenced by the significantly correlations uncovered. In order to manage AKI after AAS and improve the outcome, the SCr level could be used as a marker for renoprotective strategy. Moving forward, these results serve as a first step in motivating us to expand the range of our research, collect newly relevant data, and use it to benefit patients.

Background: Sexualized substance use (SSU) is the practice of psychotropic substance usage, before or during sexual intercourse in order to increase sexual pleasure and arousal. It has a strong association with sexually transmitted infections (STIs). The present study aimed to assess the knowledge gaps regarding SSUs among the community health mobilizers by interviewing them regarding their knowledge, attitudes, and practices through qualitative approach. Methodology: In-depth interviews (IDIs) were conducted with a total of nineteen community health mobilizers engaged in counselling of sexualized substance users. A semi-structured open-ended questionnaire with socio-demographic information and probes related to SSU was administered. Informed consent was taken from each participant prior to data collection. Results: Gender-wise distribution indicated that 47% of the community mobilizers are men, followed by transgender persons (32%), and women (21%). Responses of participants highlighted that alcohol consumption was the most observed form of SSU. The findings indicated that drug administration through injection was most common, followed by sniffing and swallowing. Sources of drug pro-curement enlisted by participants included peddlers, peer groups, sexual parties, medical and liquor stores. Only 63% of participants had fair knowledge about STIs such as HIV, viral hepatitis, syphilis, and gonorrhoea. All were familiar with the administration of naloxone injections and the locations of nearby hospitals where patients could be transported in the event of an overdose. Conclusions: The in-depth interviews among the study participants reflected substantial know-ledge gaps related to various areas associated with SSU, which highlights the need for periodic workshops and training for upgradation of existing knowledge and practices among community health mobilizers. This will help to broaden their knowledge of different types of SSUs, the latest substances of abuse, the diseases caused by high-risk sexual practices, and additional health and psychological issues associated with SSUs, which would ultimately help in better counseling and management of sexualized substance users. It may also play a crucial role in the strengthening of capacity-building systems and engagements at the community level. This study may be used as formative research by researchers and policy makers to develop study protocols for multi-centric community-based studies among community health mobilizers and sexualized substance users across the country for further validation and exploration.

Noisy data is always encountered in real applications, such as bioinformatics, neuroimage and remote sensing. Existing methods mainly consider linear or generalized linear errors-in-variables regression, while relatively little attention is paid for the multivariate response case, and how to evaluate the estimation performance under perturbed covariates is still an open question. In this paper, we consider the information-theoretic limitations of estimating a low-rank matrix in the multi-response errors-in-variables regression model. By application of the information theory and statistical techniques on concentration inequalities, the minimax lower bound is provided in terms of the squared Frobenius loss, which recaptures the rate provided under the clean covariate assumption in previous literatures. Hence our result further indicates that though under the more realistic errors-in-variables situation, no more samples are required so as to achieve a rate-optimal estimation.

Endotoxins are toxic substances that widely exist in the environment and can enter the intestine with food and other substances. Intestinal epithelial cells are protected by a mucus layer that contains MUC2 as its main structural component. However, a detailed understanding of the mechanisms involved in the function of the mucus barrier in endotoxin penetration is lacking. Here, we established the most suitable proportion of Caco-2/HT-29 co-culture cells as a powerful tool to evaluate the intestinal mucus layer. Our findings significantly advance current knowledge as focal adhesion and ECM-receptor interaction were identified as the two most significantly implicated pathways in MUC2 small interfering RNA (siRNA)-transfected Caco-2/HT-29 co-culture cells after 24 h of LPS stimulation. When the mucus layer was not intact, LPS was found to damage the tight junctions of Caco-2/HT29 co-cultured cells. Furthermore, LPS was demonstrated to inhibit the integrin-mediated focal adhesion structure and damage the matrix network structure of the extracellular and actin microfilament skeletons. Ultimately, LPS inhibited the interactive communication between the extracellular matrix and the cytoskeleton for 24 h in the siMUC2 group compared with the LPS(+) and LPS(-) groups. Overall, we recognized the potential of MUC2 as a tool for barrier function in several intestinal bacterial diseases.

The presented results of simulations take into account the optical parameters of the selected sea region (from literature data on the southern Baltic Sea) and two optically extreme types of crude oil (from historical data) which exist in the form of a highly diluted oil-in-water emulsion (10 ppm). The spectral index was analyzed based on the results of modelling the radiance reflectance distribution for almost an entire hemisphere of the sky (zenith angle from 0 to 80o). The spectral index was selected and is universal for all optically different types of oil (wavelengths 650 and 412 nm). The possibility of detecting pollution in the conditions of the wavy sea surface (as a result of wind of up to 10 m/s) was studied. It has been also shown that if the viewing direction is close to a direction perpendicular to the sea surface, observations aimed at determining the spectral index are less effective than observation under the zenith angle of incidence of sunlight for all azimuths excluding the direction of sunlight specular reflection.

Authors such as Schnoebelen (2012: 12) suggest that in some languages (cf. Navajo) certain dependent clauses are frequently used independently to “mark emotional evaluation and background information”. Evans (2007) uses the term insubordination to refer to this phenomenon. Our study focuses on a particular insubordinate construction introduced by the sequence ni que in Spanish, as in the example [¡Una carta cada día!] Ni que yo fuese Umbral. (CORPES 100), used as an independent clause with a sociopragmatic meaning which is different from that of its subordinate counterpart (cf. No escribiría una carta cada día ni que yo fuese Umbral). Our research questions ask about the potential for ni que to be used as a discourse marker fulfilling an expressive function when it introduces this type of construction, and the derived hypothesis is then oriented to test whether Schnoebelen's (2012) observation about insubordinate constructions applies also to this Spanish construction. In order to test this hypothesis, we performed a functional-discourse analysis of more than 2000 concordances (and their extended contexts) in Mark Davies' Corpus del Español and the Real Academia CORPES XXI. Our findings show that the insubordinate construction differs in function and meaning from its subordinate counterpart, the former fulfilling a stronger emotive function, often combined with other discourse-pragmatic functions, such as evaluation or the organization of discourse.

An extension of the models used to generate fractal traffic flows is presented by means of the formulation of a model that considers the use of one-dimensional chaotic maps. Based on the disaggregation of the temporal series generated by the model, a valid explanation of behavior of the values of Hurst exponent is proposed and the feasibility of their control from the parameters of the proposed model is shown.

Background: The t (2; 5) chromosomal rearrangement and resulting nucleophosmin (NPM1) -ALK fusion was first observed in 1994 in anaplastic large cell lymphoma (ALCL), a T-cell lymphoma responsive to cyclophosphamide, abriblastine, vincristine and prednisone in approximately 80% of cases; refractory cases usually respond favorably to brentuximab-vedotin. These treatments are regarded as a bridge to allogeneic hematopoietic stem cell transplantation (allo-SCT). Nowadays, transplant procedures and monitoring of chemotherapy patients proceed very slowly because the SARS-CoV-2 pandemic has heavily clogged the hospitals in all countries. Results: A 40-year-old Caucasian woman was first seen at our clinical center in June 2020. She had ALCL ALK +, a history of failure to two previous therapeutic lines and was in complete remission after 12 courses of Brentuximab, still pending allo-SCT after two failed donor selection. Facing of a new therapeutic failure, we requested the Italian drug regulatory agency, and obtained the authorization, to administer 250 mg twice a day of Crizotinib, a drug incomprehensibly not registered for ALCL ALK +. Conclusions: The response to Crizotinib was optimal, since no adverse event occurred, and CT-PET persisted negative; this drug has proved to be a valid bridge to allo-SCT

In the energy-momentum density expressions for a relativistic perfect fluid with a bulk motion, one comes across a couple of pressure-dependent terms, which though well known, are to an extent, lacking in their conceptual basis and the ensuing physical interpretation. In the expression for the energy density, the rest mass density along with the kinetic energy density of the fluid constituents due to their random motion, which contributes to the pressure as well, are already included. However, in a fluid with a bulk motion, there are, in addition, a couple of explicit, pressure-dependent terms in the energy-momentum densities, whose presence to an extent, is shrouded in mystery, especially from a physical perspective. We show here that one such pressure-dependent term appearing in the energy density, represents the work done by the fluid pressure against the Lorentz contraction during transition from the rest frame of the fluid to another frame in which the fluid has a bulk motion. This applies equally to the electromagnetic energy density of electrically charged systems in motion and explains in a natural manner an apparently paradoxical result that the field energy of a charged capacitor system decreases with an increase in the system velocity. The momentum density includes another pressure-dependent term, that represents an energy flow across the system, due to the opposite signs of work being done by pressure on two opposite sides of the moving fluid. From Maxwell's stress tensor we demonstrate that in the expression for electromagnetic momentum of an electric charged particle, it is the presence of a similar pressure term, arising from electrical self-repulsion forces in the charged sphere, that yields a natural explanation for the famous, more than a century old, 4/3 factor in the electromagnetic mass.

We argue that the problem of time is not a crucial issue inherent in the quantum picture of the universe evolution. On the minisuperspace model example with the massless scalar field, we demonstrate four approaches to the description of quantum evolution, which give similar results explicitly. The relevance of these approaches to building a quantum theory of gravity is discussed.

A significant part of the literature on innovative practice in medicine relates to seizing opportunities and curbing harms for patients in desperate situations. Unfortunately, the term innovation has multiple meanings and a rich rhetorical flourish that adds confusion and misunderstanding to an already difficult debate. This paper aims to enhance the current definition of innovative practice for medicine. First, we replace the term innovation with the more literal of new non-validated practice. To identify this meaning, we analyse the traditional research ethics’ distinction between research, validated practice, and innovation in the Belmont Report. Second, we propose the following explicit definition of new non-validated practice: the first or recent use of diagnostic, therapeutic or preventive interventions that introduce a significant change, with an insufficient level of evidence of safety or efficacy for regular healthcare, and with the main aim to benefit individual patients. This definition is a promising conceptual tool to inform empirical research, ethicists, and the harmonization of its regulation and legislation (e.g. right-to-try laws).

The past decade has witnessed enormous progress, which has seen the noncoding RNAs (ncRNAs) turn from the so called dark matter RNA to critical functional molecules, influencing most physiological processes in development and disease contexts. Many ncRNAs interact with each other and are part of networks that influence the cell transcriptome and proteome and consequently the outcome of biological processes. The regulatory circuits controlled by ncRNAs have become increasingly more relevant in cancer. Further understanding of these complex network interactions and how ncRNAs are regulated, is paving the way for the identification of better therapeutic strategies in cancer.

Collision avoidance is an important feature in advanced driver-assistance systems, aiming at providing correct, timely and reliable warnings before an imminent collision (objects, vehicles, pedestrians, etc.). A co-simulation framework is proposed in this paper to address the design and evaluation of collision avoidances in a cyber-physical system. The co-simulation framework is supported on the interaction between SCANeR and Matlab/Simulink. From the best of authors’ knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip LIDAR sensors in a cyber-physical system (CPS) considering traffic scenarios is presented. The CPS is designed and implemented in SCANeR. Secondly, an obstacle recognition library with three specific Artificial Intelligence-based methods is also designed based on sensory information database provided by SCANeR. Three methods for collision avoidance detection are considered, i.e.; a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods for detecting obstacles before different weather conditions is done with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and fog conditions, the support vector machine in rainy and self-organized map in snowy conditions.

This paper presents a methodology for the integration of Building Information Modeling (BIM) and Life Cycle Cost Analysis (LCCA) to assess the economic implications of designing aging-in-place (AIP) homes at the conceptual stage. With the global increase in the aging population, there is an increased demand for housing solutions tailored to the needs of elderly individuals. Focusing on the importance of the early phase of design, this study aims to improve the process of making efficient decisions by providing a comprehensive assessment of the life cycle costs associated with AIP homes. The study introduces a semi-automated model for the economic evaluation of AIP homes, enabling the estimation of costs throughout the houses’ entire life cycle, from design and construction to operation, maintenance, and eventual renovation or disposal. The said model facilitates the exploration of the long-term economic feasibility of design’s related decisions with an emphasis on the importance of considering the life cycle costs early during the design process to optimize the functionality and economic viability. By investing in accessible and universal design features upfront, the initial costs for modifications can lead to long-term savings by reducing the need for extensive retrofits. The model can easily do comparison between different design alternatives in terms of their lifecycle costs, allowing designers to assess the financial impact of using important features in their design such as wider doorways, accessible bathrooms, and elevators. Overall, this study provides valuable insights for designers and homeowners about the economic aspects of designing AIP homes as a support for efficient decision-making during the early stages of the design process.

The present study aimed to evaluate the psychometric properties of the Greek version of the Jefferson Scale of Empathy—Student version (JSE-S) and its association with potential predictors among Greek-speaking undergraduate medical students. This study adopted a cross-sectional, comparative–descriptive research design. The study was conducted during October and November 2023. Cronbach’s α for the JSE-S was 0.846. Cronbach’s α values for the factors “perspective taking”, “compassionate care”, and “standing in the patient’s shoes” were 0.800, 0.715, and 0.748, respectively. The intraclass correlation coefficient for the JSE-S score in the test–retest study was 0.827 (95% CI = 0.647 to 0.915, p-value &lt; 0.001), indicating a high level of reliability. The participants showed moderate empathy levels. Females scored higher than males on the Greek version of the JSE-S (108.8 vs. 102.8, p-value &lt; 0.001). Moreover, students enrolled in the fourth academic year showed higher empathy mean scores than those enrolled in the first year (108.6 vs. 103.6, p-value = 0.012). Statistically significant empathy differences by specialty preferences or faith in God/supreme power were not found. The present study provided satisfactory evidence that the Greek JSE-S is a psychometrically sound measurement instrument. Empathy differences by gender were found in line with prior literature.

Digital federated platforms and data cooperatives for secure, trusted and sovereign data exchange will play a central role in the construction industry of the future. With the help of platforms, cooperatives and their novel value creation, the digital transformation and the degree of organization of the construction value chain can be taken to a new level of collaboration. The goal of this research project was to develop an experimental prototype for a federated innovation data platform along with a suitable exemplary use case. The prototype is to serve the construction industry as a demonstrator for further developments and form the basis for an innovation platform. It exemplifies how an overall concept is concretely implemented along one or more use cases that address high-priority industry pain points. This concept will create a blueprint and a framework for further developments, which will then be further established in the market. The research project illuminates the perspective of various governance innovations to increase industry collaboration, productivity and capital project performance and transparency as well as the overall potential of possible platform business models. However, a comprehensive expert survey revealed that there are considerable obstacles to trust-based data exchange between the key stakeholders in the industry value network. The obstacles to cooperation are predominantly not of a technical nature, but of a competitive, predominantly trust-related nature. To overcome these obstacles and create a pre-competitive space of trust, the authors therefore propose the governance structure of a data cooperative model, which is discussed in detail in this paper.

L-17 is a thiadiazine derivative with putative anti-inflammatory, neuroprotective, and antidepressant-like properties. In this study, we applied combined in silico and in vivo electrophysiology techniques to reveal the potential mechanism of action of L-17. PASS 10.4 Professional Extended software suggested that L-17 might have pro-cognitive, antidepressant, and antipsychotic effects. Docking energy assessment with AutoDockVina predicted that the binding affinities of L-17 to the serotonin transporter (SERT) and serotonin receptors 3 and 1A (5-HT3 and 5-HT1A) are compatible to the selective serotonin reuptake inhibitor (SSRI) fluoxetine and selective antagonists of 5-HT3 and 5-HT1A receptors, granisetron and WAY100135, respectively. However, while the binding mechanisms of L-17 to the SERT and 5-HT1A receptor were similar to fluoxetine and WAY100135, its interacting with 5-HT3 receptor might be substantially different from this of granisetron. Acute administration of L-17 led to dose-dependent inhibition of firing activity of 5-HT neurons of the dorsal raphe nucleus. This inhibition was partially reversed by subsequent administration of WAY100135. Based on both in silico and in vivo electrophysiology assessments, we suggest that L-17 is a potent 5-HT reuptake inhibitor and a putative partial agonist of 5-HT1A receptors. As such, L-17 in particular and thiadiazine derivatives, in general, might be a representative of a new class of antidepressant drugs. Since L-17 also possesses neuro- and cardioprotective properties, it can be useful in affective illness developing due to the general medical condition, such as post-stroke and post-myocardial infarction (MI) depression.

It is shown that the 5D geodetic equations and 5D Ricci identities give us a way to create a new viewpoint on some problems of Modern Physics, Astrophysics, and Cosmology. Specifically, the application of the 5D geodetic equations in (4+1) and (3+1+1) splintered forms obtained with the help of the monad and dyad methods made it possible to introduce a new, effective generalized concept of the rest mass of the elementary particle. The latter leads one to novel connections between the General Relativity and quantum field theories, as well as all of that, including the (4+1) splitting of the 5D Ricci identities, brings about a better understanding of the magnetic monopole problem and the vital difference in the origins of the Maxwell equations and gives rise to surprising connections between them. The obtained results also provide new insight into the mechanism of the 4D Universe’s expansion and its following acceleration.

We present here a case of complex uterine anomaly – Obstructed HemiVagina with Ipsilateral Renal Agenesis (OHVIRA), also known as Herlyn-Werner-Wunderlich syndrome in a 13-year-old girl with the history of recurrent urinary tract infections (rUTI). In emergency room, trans-abdominal sonography revealed ovarian cyst and renal agenesis, without any suspicion of vaginal obstruction. This led to delay in the diagnosis of this uncommon anomaly. Finally, MRI findings confirmed the presence of OHVIRA syndrome. As the congenital anomalies of kidney and urinary tract (CAKUT) are in almost one third of cases associated with genital malformations, urologist should carefully search for patients with rUTI. The patient underwent simultaneous laparoscopy and vaginoscopy, what was in our opinion the most appropriate therapeutic decision. In this article we are also going to discuss the role of laparoscopy in the management of OHVIRA syndrome as well as other surgical techniques described in the literature.

This article discusses how, in today’s world of disruptive and dramatic social change (DSC), non-sports related coaching, which includes a wide range of services such as life coaching, career coaching, executive coaching, and team coaching, can inadvertently fuel undesirable social dynamics. There is little or no awareness of this risk among coaches and coachees. The global, fast-growing, multi-billion-dollar industry aimed at supporting people and organisations to perform better and increase wellbeing while managing and adapting to change has been developed with limited sociological input. The article is based on 15 years of social constructionist-informed reflective practice by a sociologist-turned-coach, and uses a multi-layered autoethnographic account to argue for a sociologically informed paradigm shift in coaching, as well as relevant sociological knowledge and social and human sciences research methodology in coaches’ education. It presents the rationale and key features of a new coaching approach that places DSC-relevant sociological concepts at the heart of the coaching process, helps people develop psycho-sociological awareness, and uses a learning-to-develop through research design. A new definition of coaching to address DSC is derived. Coaching practitioners will find DSC-relevant sociological concepts, critical reflections, coaching questions, and procedures to expand coaching effectiveness. Interdisciplinary research topics combining coaching sociology and coaching psychology are suggested.

Published in July 2018, TAILORx aimed to establish non-inferiority of endocrine therapy (ET) compared to addition of chemotherapy (CHT-ET) in hormone receptor positive, human epidermal receptor 2 negative (HR+/HER2-) breast cancer (BC) patients with a 21-gene intermediate (11-25) recurrence score (RS). While this hypothesis proved correct, the study did show benefit of addition of chemotherapy (CHT) in a subgroup of women under 50 years of age, and particularly in the RS 16-25. The aim of this present study was to look at how TAILORx findings, including changes in RS categories, impacted CHT implementation at one oncologic center in Basel, Switzerland, and to identify main factors leading to these changes. Methods: We conducted a retrospective study on HR+/HER2-, BC patients who underwent 21-gene genomic testing between 2010-2021, at our center. Patients with metastatic disease were not included. We identified 326 eligible patients, of which 165 had a BC diagnosis before TAILORx (cohort A) and 161 after TAILORx publication (cohort B). Results: Demographic and tumor characteristics were similar in the two cohorts, although cohort B included significantly more women under the age of 50 when compared to A (34% vs. 24%, p<0.001). Median age and mean RS results were comparable 59 (IQR 16) in A and 58 (IQR 19) years in B and 17.72 (SD9.59) in A and 17.89 (SD9.53) in B, respectively. Patients in cohort A were slightly more overweight when compared to B (55% vs. 40% respectively, p<0.001). Most patients had stage II tumors of NST histologic type. Tumors in cohort B had higher Ki-67 than cohort A (39% vs. 32%, p=0.010). When compared based on manufacturer’s and based on TAILORx thresholds there were no significant differences in RS distribution. However, changes in score category led to shifts in patient population distribution, leading to a 40% drop in the low RS (from 60% to 20%), a doubling in the intermediate RS (from 30% to 60%) and an increase of 5% in the high RS (from 8-10% to 15%). Most patients had conservative surgery, adjuvant radiotherapy (RT) and ET. Overall CHT recommendation and application did not differ significantly in B vs. A. There was a reduction of 1% in the intermediate RS (11-25) and an increase of 13% CHT-ET application in the high RS (>26) category. In cohort B we noticed an increase in CHT-ET application among women <50 years old (by 12.5%), in lobular carcinomas (by 10%), grade 3 tumors (by 2%), node positive BC (by 3%) and node negative (by 2%). Tumor board recommendation for CHT dropped by 1% in the post TAILORx era, with a notable reduction of 5% in the intermediate RS (11-25) category. However, overall CHT administration rate was 19% in cohort A and 22% in B (p=0.763). Tumor Board recommended CHT for 90% of the BC patients that would have otherwise been assigned to CHT according to new RS guidelines in A and for 85% in B, showing a trend for undertreatment. Logistic regression analysis showed significance of age in both cohort A (OR 1.05, 95% CI 1.01-1.11, p=0.03) and cohort B (OR 0.89, 95% CI 0.84-0.94), p<0.001), and of nodal status in both cohort A (=R 3.32 95% CI 1.09-10-06, p=0.034) and cohort B (OR 3.31, 95% CI 1.29-8.53, p=0.013), while intermediate and high RS seem to be more relevant in cohort A (OR 0.12, 95% CI 0.03-0.43, p=0.01 and OR 0.04, 95% CI 0.01-0.21, p<0.01). Overall logistic regression analysis showed relevance of age (OR 0.93, 95% CI 0.08-0.97, p=0.001), pN (OR 4.77, 95% CI 2.03-11.22, p<0.001) and RS categories (RS 11-25: OR 0.02, 95% CI 0.01-0.07, p<0.001; RS>26: OR 617.93, 95% CI 57.97-6587.16, p<0.001). Conclusion: Our findings are similar to those reported across several studies: while tumor board recommendation for CHT decreases in the intermediate RS category, there is an increase being reported in the high RS category, leading to overall minor changes in CHT application. Administration of CHT-ET seems to be increasing among younger women, with unfavorable histo-pathological factors, such as lobular carcinoma and G3 histologic grade. Before TAILORx there is a tendency for undertreatment (-10%), especially among older BC patients, which seems to be maintained and even deepened (-15%) in the post TAILORx era, pointing to a personalized decision-making approach among Swiss oncologists.

Background: The CoBaTrICE initiative standardized intensive care training throughout Europe. Pericardiocentesis, an important yet infrequent operation, poses unique training challenges often unmet by conventional methods. This study evaluates the efficacy of virtual reality (VR) simulations and 3D-printed mannequins in pericardiocentesis training, both crafted from scratch using highly affordable materials and free software. Methods: Thirty-five final-year medical students participated in this prospective, quasi-experimental study. Initially, students underwent VR simulation training, followed by training using 3D-printed self-made mannequins. Learning outcomes were assessed using the Objective and Structured Clinical Examination (OSCE) questionnaire. Heart rate variability (HRV) analysis was employed to monitor stress responses, while the NASA Task Load Index (NASA-TLX) was used to gauge self-perceived difficulty. Results: Although the mannequin model induced more stress reactions, it excelled in tasks requiring fine motor skills, such as correct placement and asepsis maintenance. In contrast, lower NASA-TLX scores indicated that the VR model imposed less mental demand and effort, reflecting a reduced cognitive load. Conclusion: Both VR simulations and 3D-printed mannequins effectively taught pericardiocentesis skills, each offering distinct advantages. Mannequins enhanced fine motor skills, whereas VR reduced cognitive load and increased engagement. The combination of both approaches could maximize training outcomes, particularly in resource-constrained environments, thus broadening access to advanced simulation education.

The development of mineral resources in China has gradually entered the stage of deep mining. Rock burst, collapse and other ground pressure disasters caused by deep high stress have become major hidden dangers restricting mine safety production. Microseismic monitoring technology is an important means of ground pressure risk prediction. In this paper, the wavelet coefficient threshold denoising method in time-frequency domain, STA/LTA method, AIC method, Skew and Kurtosis method are studied, and the automatic P-phase onset time picking model based on noise reduction and multiple detection indexes is established. Through the effect analysis of microseismic signals collected by microseismic monitoring system of coral Tungsten Mine in Guangxi, automatic P-phase onset time picking is realized. the reliability of the P-phase onset time picking method proposed in this paper based on noise reduction and multiple detection indexes is verified. The picking accuracy can still be guaranteed under the severe signal interference of background noise, power frequency interference and manual activity underground mine, Which is of great significance to the data processing and analysis of microseismic monitoring.

Peptide-based drugs are promising anticancer candidates due to their biocompatibility, and low toxicity. Particularly, tumor homing peptides (THPs) have the ability to bind specifically to can-cer cells receptors and tumor vasculature. Despite their potential to develop antitumor drugs, there are few available prediction tools to assist the discovery of new THPs. Two webservers based on machine learning models are currently active, the TumorHPD (https://webs.iiitd.edu.in/raghava/tumorhpd) and the THPep (http://codes.bio/thpep), and more recently the SCMTHP (SCMTHP (pmlabstack.pythonanywhere.com), based on scoring card method. Herein, a novel method based on network science and similarity searching implemented in the starPep toolbox (http://mobiosd-hub.com/starpep/) is presented for THPs discovery. The approach leverages from exploring the structural space of THPs with Chemical Space Networks (CSNs) and from applying centrality measures to identify the most relevant and non-redundant THPs sequences within the CSN. Such THPs were considered as queries (Qs) for multi-query similarity searches that applies a group fusion (MAX-SIM rule) model. The resulting multi-query similarity searching models (SSMs) were validated with three benchmarking datasets of THPs/non-THPs. Predictions achieved accuracies ranged from 92.64 to 99.18% and Matthews Correlation Coefficients between 0.894-0.98, outperforming state-of-the-art predictors. The best model was applied to repurpose AMPs from the starPep database as THPs, which were subse-quently optimized for the TH activity. Finally, 54 promising THP leads were discovered, and their sequences were analyzed to encounter novel motifs. These results demonstrate the potential of CSNs and multi-query similarity searching for a rapid and accurate identification of THPs.

Magnesium nanoparticles of various mean diameters (53 – 239 nm) were synthesized herein via Pulsed Laser Ablation in Liquid (PLAL) from millimeter sized magnesium powders within iso-propyl alcohol. It was observed via a 3x3 full factorial DOE that the processing parameters can control the nanoparticle distribution to produce three size-distribution types (bimodal, skewed and normal). Ablation times of 2, 5, and 25 minutes where investigated. An ablation time of 2 minutes produced a bimodal distribution with the other types seen at higher periods of processing. Mg nanoparticle UV-Vis absorbance at 204 nm increased linearly with increasing ablation time, indicating an increase in nanoparticle count. The colloidal density (mg/ml) generally increased with increasing nanoparticle mean diameter as noted via increasing UV-vis absorbance. High la-ser scan speeds (within the studied range of 3000 - 3500 mm/s) tend to increase the nanoparticle count/yield. For the first time, the effect of scan speed on colloidal density, UV-vis absorbance and nanoparticle diameter from metallic powder ablation was investigated and is reported herein. The nanoparticles formed dendritic structures after being drop cast on aluminum foil as observed via FESEM analysis. Dynamic light scattering was used to measure the size of the nanoparticles. Magnesium nanoparticles have promising use in the fabrication of wearables, such as in conductive tracks or battery electrodes, owing to their low heat capacity, high melting point and bio-compatibility.

Pandemic human influenza detections are dependent on complex, time-consuming DNA molecular amplifications that require sophisticated PCR electrophoresis, cell culture amplification and complex spectrophotometric absorption techniques. In this study, simplified rapid electrochemical sensing methods were sought via a remote cyclic voltammetry and stripping amplifier circuit using our workstation systems. A sensing probe was prepared using human DNA and a Covid 19 antigen immobilized antibody sensing amplifier with rapid accumulation time of 30 sec. Optimal experimentation was performed using a telematics WiFi wearable circuit equipped with a bioelectrochemical analyzer-2 amplifier three electrode system. Diagnostic accumulation voltammetry and cyclic redox scanning were attempted at -2.0V~2.0V potential windows and 0.2V/Sec scan rate. Anodic and cathodic real time assay was performed using saliva swab from female patients that tested negative and positive. Diagnostic results are expected to be useful for non-contact analysis and for rapid personal testing anytime, anywhere.

The rapid integration of Generative AI technologies in academic and research environments marks the beginning of a new digital era, characterized by enhanced efficiency and innovative capabilities. This technological advancement, however, brings forth significant challenges and ethical dilemmas. One of the primary concerns is the potential diminishment of authentic human intellect in scholarly works, fueled by the capabilities of AI to generate ambiguous, fabricated, or even biased and inappropriate content. These issues highlight the critical need for developing comprehensive frameworks and establishing a dedicated field of study to govern the use of AI-generated content in academic and professional contexts. This autoethnography explores the impact of generative AI on educational practices, detailing the development of the SPARRO framework in healthcare and nursing classes. Through personal reflections, interviews, and observations, it addresses specific challenges, offering insights into integrating GenAI ethically and effectively to enhance teaching and learning.

Urban environments play a crucial role in shaping the lived experiences of women, yet traditional urban design practices often neglect the diverse needs and identities of women, perpetuating social barriers and gender inequalities. This review paper seeks to explore the existing research on how urban design influences women's social challenges in cities. By synthesizing literature from urban planning, architecture, gender studies, and sociology, this review provides a comprehensive overview of the impact of urban design on women's experiences and opportunities in urban spaces. The review highlights gender disparities in urban design, inclusivity in urban planning, and the need for gender-sensitive approaches to address these disparities. Key scholars, including Susan S. Fainstein, Leslie Kern, Sharon Zukin, Daphne Spain, and Vandana Shiva, have contributed significantly to understanding gender disparities in urban spaces and advocating for more inclusive and equitable urban environments. The discussion emphasizes the importance of community engagement, participatory planning processes, and an intersectional lens in urban design to ensure that women's voices and needs are effectively incorporated into decision-making processes. Future research directions include exploring the role of technology, smart city initiatives, and addressing the impacts of gentrification and urban redevelopment on women's access to housing and resources. By advancing research on gender equity in city planning, we can work towards creating more inclusive, equitable, and sustainable urban environments that benefit all residents.

Cured-in-place pipe (CIPP) lining is a widely adopted method for pipeline renewal, offering advantages such as rapid installation and cost-effectiveness. However, concerns regarding the environmental impacts of volatile organic compound (VOC) emissions during the installation process have raised issues regarding the CIPP method. The literature review conducted in this paper indicated the need for stringent monitoring and management practices to mitigate adverse effects, emphasizing the importance of safe installation protocols. This paper presents the initial results of a case study focusing on VOC emissions, specifically investigating non-styrene polyester resins and water curing. To capture emissions from CIPP activities, the methodology involved air sampling using various equipment, including photoionization detectors (PID), summa canisters, passive worker sampler sorbent tubes, and method 13 cartridges. The preliminary findings indicate that non-styrene polyester resins do not exceed the exposure limits set out by the OSHA and USEPA. The future phases of this project will explore different resins and curing methods.

The study looks at how joining live video chats with native English speakers on TikTok helps people who are learning English feel more ready to talk in English and less nervous about it. This study looks at EFL students who join TikTok live sessions. The researcher wants to understand how confident and nervous the students feel when they communicate. He uses qualitative research methods to do this. The study shows that using TikTok in a fun and calming way could help people learn a new language and reduce feelings of worry. This is helpful for teachers and language experts who want to use social media to help people learn languages.

During the development of new medicines mutually exclusive specificity appears to be required but hitherto is most often included at the late clinical trial stage. Here, I describe the use of Hedgehog signalling in Drosophila as a model to represent a mutually exclusive relationship within the context and report the identification of CG43658, a putative Rho guanine nucleotide exchange factor and orthologue of the Charcot-Marie-Tooth disease associated gene ARHGEF10. Furthermore, a Computer that is able to consider the whole and describe the sum of everything in it absolutely in unambiguous terms is a useful tool. Here I describe such a computer with a suggestion for an application to examine any component in the context where a medicine is sought. Taken, together I would like to propose this method as a fundamental necessity and improvement upon current existing methods related not only to Hedgehog signalling but plausibly to life science research and the search for medicines in general.

The object of study is a transversely bent triangular plate made of orthotropic material fixed along the edges of the plate under the action of a uniformly distributed load. Fourth-order differential equilibrium equations with variable orthotropy parameters were used. The equations were approximated by finite differences for a grid of scalene triangles. This type of mesh accurately describes the boundary contour of the triangular-shaped plates. The boundary conditions for the mesh consider the orthotropy of the plate material. Seven standard finite-difference equations have been developed considering the boundary conditions along the three edges of the plate and the presence of three angles of an irregularly shaped triangle. A finite difference matrix is obtained. The matrix structure makes calculating a triangular plate at different base angles possible. The boundary conditions were varied in the form of rigid or hinged support of triangular plates. The calculation method considers the orthotropic parameters of the material in two mutually perpendicular planes. The adaptation of the numerical method to the calculation of orthotropic plates of arbitrary shape is described. Relationships are given for determining the rigidity characteristics of orthotropic materials. An algorithm for simple engineering calculation of triangular orthotropic plates is proposed, which makes it possible to perform accurate calculations in variant design.

We prove a quasi-pseudometric version of the strong Ekeland principle proved by P. Georgiev and T. Suzuki.

Pharmaceutical aerosols play a key role in the treatment of lung disorders, but also systemic diseases, due to their ability to target specific areas of the respiratory system (RS). This article focuses on identifying and clarifying the influence of various factors involved in the generation of aerosol micro- and nanoparticles on their regional distribution and deposition in the RS. Attention is given to the importance of process parameters during aerosolization of liquids or powders and the role of aerosol flow dynamics in RS. The interaction of deposited particles with the fluid environment of the lung is also pointed out as an important step in the mass transfer of the drug to the RS surface. The analysis presented highlights the technical aspects of preparing the precursors to ensure that the properties of the aerosol are suitable for a given therapeutic target. Analyzing existing technical limitations, several potential strategies for enhancing the efficiency of targeted therapeutic delivery to or through the respiratory system are identified and presented, including the use of smart inhaling devices incorporating AI algorithms.

In order to reveal the frost heaving mechanism of void water behind the lining of high-speed railway tunnels in cold regions，the voids were first classified according to the positional relationship between voids and waterproof panels，and then the water supply and discharge conditions of different types of voids were investigated，then the influence of the excretion conditions on the frost heave force was experimentally studied. Based on these conditions，circular wedge-shaped and flying saucer-shaped void freezing models were established to analyze the evolution process of accumulated water frost heave. Then，according to the relative position of the excretion channel and the void，the excretion coefficient was introduced，and the calculation method of the frost heaving force of the voided water was proposed，and the influencing factors and laws of the frost-heave force were revealed. The results are shown as follows: 1) The blockage of the excretion channel will lead to the generation of frost heaving force; 2) The freezing and thawing process of the water within the cavity develops from the thinnest part of the void edge to the thicker part，and the process of frost heave-thaw，water replenishment-re-freeze heave of the water within the cavity leads to greater and greater frost heave force; 3) The frost-heaving force of the water within cavity is controlled by the void height and the position of the excretion channel. The larger the cavity height is or the closer the excretion channel is to the bottom surface of the void，the greater the frost-heave force is.

Artificial intelligence (AI)-based conversational models, such as ChatGPT, Microsoft Bing, and Google Bard, emerged as valuable sources of health information for the lay individuals. However, the accuracy of information provided by these AI models remains a significant concern. This pilot study aimed to test a new tool referred to as “CLEAR”, designed to assess the quality of health information delivered by AI-based models. Tool development involved a literature review on health information quality, followed by initial establishment of the CLEAR tool comprising five items that aimed to assess the following: completeness of content in response to the prompt, lack of false information, evidence support, appropriateness, and relevance of the generated content. Each item was scored on a 5-point Likert scale from excellent to poor. Content validity was checked by expert review of the initial items. Pilot testing involved 32 healthcare professionals using the CLEAR tool to assess content on eight different health topics deliberately designed with varying qualities. The internal consistency was checked using the Cronbach α. Feedback through the pilot test resulted in language modifications to improve the clarity of the items. The final CLEAR tool was used to assess health information quality generated through four different AI-based models in five different, yet common health topics. The AI models were ChatGPT 3.5, ChatGPT 4, Bing, and Bard, and the content generated was scored by two independent raters with Cohen κ to assess the inter-rater agreement. The final five CLEAR items were: (1) Is the content sufficient? (2) Is the content accurate? (3) Is the content evidence-based? (4) Is the content clear, concise, and easy to understand? and (5) Is the content free from irrelevant information? Pilot testing using the eight different health topics revealed an acceptable internal consistency with a Cronbach α range of 0.669–0.981. The use of the final CLEAR tool yielded the following average scores: Bing (mean=24.4±0.42), ChatGPT-4 (mean=23.6±0.96), Bard (mean=21.2±1.79), and ChatGPT-3.5 (mean=20.6±5.20). The inter-rater agreement revealed the following Cohen κ values: for ChatGPT-3.5 (κ=0.875, P<.001), ChatGPT-4 (κ=0.780, P<.001), Bing (κ=0.348, P=.037), and Bard (κ=.749, P<.001). The CLEAR tool is a brief yet helpful tool that can aid to standardize testing of the quality of health information generated by the AI-based conversational models. Future studies are recommended to validate the utility of the CLEAR tool to assess the quality of the AI-generated health-related content using a larger sample across various complex health topics.

The radiation stability of polymer test objects fabricated by direct laser writing is studied. The two groups of 6 cubes (50×50×50 μm3) were printed on a common silicon substrate. 6 cubes were irradiated with X-rays in the synchrotron radiation beam (12 keV, 1010 photons/mm2/s), the other 6 kept non-irradiated for the reference. In each group, the fabrication parameters (laser power and slicing step) were uniformly varied from cube to cube. Each irradiated cube was exposed with the dose of 1013 X-ray photons. The calibration of this dose in the radiological units (Gy) was carried out using the tissue-equivalent thermoluminescent detectors (TLD-800). The corresponding exposition dose was estimated as 30 kGy for each cube. The radiation effects were evaluated by Raman spectroscopy and by morphological changes observed with the raster electron microscope. The primary radiation effect appears in the essential increase of the polymerization degree with consuming carbon-carbon double bonds in favor of the polymer cross-linking. Only one cube of 6 has changed the size and shape due to this effect, while the others retained the initial shape. Morphological changes are connected with the improper fabrication parameters (laser power and slicing step). Properly fabricated objects withstand the X-rays of the synchrotron radiation beam.

In recent, Chae found that, at weak gravitational acceleration g_N≲10⁻⁹ms⁻², the observed orbit of the wide binary stars is not accordant with current theory of binary star. Here, we present, this finding should be an observational evidence for that Newtonian theory of orbit perturbation is still valid in galactic scale.

With the rapid increase in diabetes worldwide, the number of patients with diabetic kidney disease (DKD), a complication of diabetes mellitus, is also on the rise. DKD is a major cause of chronic kidney disease progressing to end-stage renal failure; however, current medical treatments for DKD do not achieve satisfactory outcomes. Molecular hydrogen (H2) is an antioxidant that selectively reduces hydroxyl radicals, a reactive oxygen species with a very potent oxidative capacity. H2 was recently shown to exert not only antioxidant, but also anti-inflammatory, cell lethality-regulating, and signal transduction-regulating effects, and is now being applied clinically. Many factors contribute to the onset and progression of DKD, with mitochondrial dysfunction, oxidative stress, and inflammation being strongly implicated. Recent preclinical and clinical trials reported that substances with antioxidant properties may slow the progression of DKD. Therefore, we conducted a literature review on animal models and human clinical trials in which H2 showed efficacy against various renal diseases. This literature review and our previous findings collectively suggest that H2 exerts therapeutic effects in patients with DKD by improving mitochondrial function. Future large-scale clinical studies are needed to confirm these findings.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) often causes severe viral pneumonia, especially among older individuals and those with underlying health conditions. The C57BL/6 mouse is widely used to develop mouse models of obesity, diabetes, hypertension, and immune disorders, conditions that are associated with increased risk of severe COVID-19. Although many studies using these mouse models have examined the pathogenicity of SARS-CoV-2, COVID-19 pathogenesis remains poorly understood. In vivo imaging analysis using two-photon excitation microscopy is useful for elucidating the pathology of COVID-19, providing pathological insights that are not available from conventional histological analysis. However, there is no reporter SARS-CoV-2 that demonstrates pathogenicity in C57BL/6 mice and emits sufficient light intensity for two-photon in vivo imaging. Here, we generated SARS-CoV-2 expressing the fluorescent protein Venus to facilitate in vivo pathological studies using C57BL/6 mouse models. We generated a mouse-adapted strain of SARS-CoV-2, by performing sequential lung-to-lung passages in BALB/c mice, followed by in C57BL/6 mice. We observed that the C57BL/6-adapted SARS-CoV-2 (named MASCV2-p25) replicated efficiently in the lungs of C57BL/6 mice, causing fatal pneumonia. Histopathologic analysis revealed severe inflammation and infiltration of immune cells in the lungs of MASCV2-p25-infected C57BL/6J mice, not unlike that observed in COVID-19 patients with severe pneumonia. Subsequently, we generated a mouse-adapted reporter SARS-CoV-2 (named MASCV-Venus-p9) by inserting the fluorescent gene Venus into MASCV2-p25, and sequential lung-to-lung passages in C57BL/6 mice. C57BL/6 mice infected with MASCV2-Venus-p9 exhibited severe pneumonia similar to that induced by MASCV2-p25. In addition, two-photon excitation microscopy of the lungs of the infected C57BL/6J mice showed that the infected cells emitted sufficient levels of fluorescence for easy observation. These findings suggest that MASCV2-Venus-p9 will be useful for two photon in vivo imaging studies of the pathogenesis of severe COVID-19 and for the development of therapeutic agents for severe pneumonia.

Transmembrane carriers of the Slc11 family catalyze proton (H+)-dependent uptake of divalent metal-ions (Me2+) such as manganese and iron - vital elements coveted during infection. Slc11 mechanism of high affinity Me2+ cell import is selective and conserved between prokaryotic (MntH) and eukaryotic (Nramp) homologs, though processes coupling the use of the proton motive force to Me2+ uptake evolved repeatedly. Adding bacterial piracy of Nramp genes spread in distinct environmental niches suggests selective gain of function that may benefit opportunistic pathogens. To better understand Slc11 evolution Alphafold (AF2)/Colabfold (CF) 3D predictions for bacterial sequences from sister clades of eukaryotic descent (MCb and MCg) were compared using both native and mutant templates. AF2/CF model an array of native MCb intermediates spanning the transition from outward open (OO) to inward open (IO) carrier. In silico mutagenesis targeting i) a set of (evolutionary coupled) sites that may define Slc11 function (putative synapomorphy), and ii) residues from networked communities evolving during MCb transition, indicate Slc11 synapomorphy primarily instructs Me2+-selective conformation switch which unlocks carrier inner gate, and contributes to Me2+ binding site occlusion and outer gate locking. Inner gate opening apparently proceeds from interaction between transmembrane helix (h) h5, h8 and h1a. MCg1 xenologs revealed marked differences in carrier shape and plasticity, owing partly to altered intramolecular H+-network. Yet, targeting Slc11 synapomorphy also converted MCg1 IO models to OO state, apparently mobilizing the same residues to control gates. But MCg1 response to mutagenesis differed, extensive divergence within this clade correlating with MCb-like modeling properties. Notably, MCg1 divergent epistasis marks emergence of the genus Bordetella-Achromobacter. Slc11 synapomorphy localizes to the 3D areas that deviate least among MCb and MCg1 models (either IO or OO) implying it constitutes a 3D network of residues articulating Me2+-selective carrier conformation switch which is maintained in fast evolving clades at the cost of divergent epistatic interactions impacting carrier shape and dynamics.

The economical load dispatch problem is a critical concern in thermal power systems to ensure cost-effective operation. This paper conducts a comparative analysis between the Social Spider Algorithm (SSA) and Particle Swarm Optimization (PSO) for economical load dispatch in a 6-unit thermal power system with the integration of 11,000 plug-in electric vehicles (PEVs). Both SSA and PSO are population-based optimization techniques designed to minimize the overall fuel cost while satisfying the load demand by determining the optimal power output of each unit. SSA emulates the social behavior of spiders, while PSO simulates the collective intelligence of a swarm of particles. Performance evaluation of the algorithms considers power system data, such as unit fuel costs, minimum and maximum loads, and total load demand. The objective is to minimize fuel cost while meeting the load demand. Comparative analysis of SSA and PSO includes convergence speed, solution quality, and computational efficiency. Experimental results indicate that SSA outperforms PSO in achieving a more optimal and economical load dispatch solution for the 6-unit thermal power system. SSA demonstrates faster convergence and provides superior-quality solutions compared to PSO. This paper contributes to the field by highlighting SSA's effectiveness in achieving cost-efficient operation of thermal power systems. The findings suggest that SSA holds promise as an optimization technique for similar power system optimization problems, enhancing overall operational efficiency and reducing costs for thermal power plants.

(1) Background: Acute myocardial infarction in pregnancy (pAMI) is a rare event, often caused by non-classical factors rather than atherosclerosis. The management of pAMI poses unique chal-lenges as it requires considering both maternal and fetal well-being.; (2) Methods: We present the case of a 36-week pregnant woman who presented with antero-lateral ST elevation myocardial infarction (STEMI) complicated by cardiogenic shock. To ensure comprehensive decision-making, an emergency Pregnancy Heart Team meeting was convened, comprising interventional cardi-ologists, gynecologists, and anesthesiologists. The team prioritized interventional treatment for pAMI and opted for primary percutaneous coronary intervention (PCI) due to the unstable ma-ternal condition.; (3) Results: The patient underwent primary PCI as the chosen intervention for pAMI. A rapid response gynecology team closely monitored the procedure and was prepared to intervene in case of irreversible hemodynamic compromise leading to cardiac arrest. A caesarean section was deemed necessary if cardiac activity was not restored within 4 minutes.; (4) Conclusions: Managing pAMI requires a multidisciplinary approach that balances the maternal and fetal well-being. In this particular case, the Pregnancy Heart Team decided to prioritize interventional treatment with primary PCI due to the unstable maternal condition. The presence of a closely monitored gynecology team ensured prompt action in case of complications.

The integration of spray drying and agglomeration offers significant advantages, such us continuous production with lower energy consumption. However, it is a knife-edge process with a narrow operating window and limited degrees of freedom that decide between successful agglomeration and fluidized bed blockage due to excessive moisture. In this contribution, factors influencing the spray-through agglomeration process of skim milk powder as a model system were investigated via a design of experiments. Three in-line monitoring methods were applied and tested to observe the most important parameters in the agglomeration process: product moisture and particle size distribution. Regarding the moisture content, a capacitive moisture sensor was calibrated with linear regression and a near-infrared sensor with partial least squares regression. Near-infrared spectroscopy was found to be the suitable method for determining moisture content, while the capacitive moisture sensor mainly provides information on the bulk density, the filling level or fluidization state in the fluidized bed. Additionally, particle size distribution data was extracted from the spectral data using in-line data of a spatial filter velocimetry probe in the fluidized bed. This opens the potential to monitor both parameters in real-time with a single non-invasive sensor.

This paper investigates the classical but yet intriguing question of modeling orthotropic RC floor systems endowed with lightening elements, by means of a uniform orthotropic slab, in order to describe accurately the building response under seismic loads. The simplified method, commonly adopted by engineers, based on the equivalence between the transverse stiffness of the RC elements of the real floor and those of the orthotropic slab is presented. A case study in which this simplified method is used is also provided. Then, an advanced finite elements (FE) based method to determine the elastic properties of the equivalent homogenized orthotropic slab is proposed. Based on the results obtained from the application of this method to a case study, a discussion on the adequacy of the simplified method is also provided.

Purpose: Hearing assistive technology (HAT) has been shown to be a viable solution to the speech-in-noise perception (SPIN) issue in children with autism spectrum disorder (ASD); however, little is known about its efficacy in tonal language speakers. This study compared sentence-level SPIN performance between Chinese children with ASD and neurotypical (NT) children and evaluated HAT use in improving SPIN performance and easing SPIN difficulty. Methods: Children with ASD (n=26) and NT children (n=19) aged 6-12 performed two adaptive tests in steady-state noise and three fixed-level tests in quiet and steady-state noise with and without using HAT. Speech recognition thresholds (SRT) and accuracy rates were assessed using adaptive and fixed-level tests, respectively. Parents or teachers of the ASD group completed a questionnaire regarding children’s listening difficulty under six circumstances before and after a ten-day trial period of HAT use. Results: Although the two groups of children had comparable SRTs, the ASD group showed a significantly lower SPIN accuracy rate than the NT group. Also, a significant impact of noise was found in the ASD group’s accuracy rate, but not in the NT group’s. There was a general improvement in the ASD group’s SPIN performance with HAT and a decrease in their listening difficulty ratings across all conditions after the device trial. Conclusion: The findings indicated inadequate SPIN in the ASD group using a relatively sensitive measure to gauge SPIN performance among children. The markedly increased accuracy rate in noise during HAT-on sessions for the ASD group confirmed the feasibility of HAT for improving SPIN performance in controlled laboratory settings, and the reduced post-use ratings of listening difficulty further confirmed the benefits of HAT use in daily scenarios.

Abstract This essay presents a real-world demonstration of the evidence-based science communication process, showing how it can be used to create scientific data visualizations for public audiences. Visualizing research data can be an important science communication tool. Maximizing its effectiveness has the potential to benefit millions of viewers. As with many forms of science communication, creators of such data visualizations typically rely on their own judgments and the views of the scientists providing the data to inform their science communication decision-making. But that leaves out a critical stakeholder in the communications pipeline: the intended audience. Here, we show the practical steps that our team - the Advanced Visualization Lab at the University of Illinois at Urbana-Champaign - has taken to shift towards more evidence-based practice to enhance our science communication impact. We do this using concrete examples from our work on two scientific documentary films, one on the theme of ‘solar superstorms’ and the other focusing on the black hole at the center of the Milky Way galaxy. We used audience research with each of these films to inform our strategies and designs. We describe how such research evidence informed our understanding of ‘what works and why’ with cinematic-style data visualizations for the public. We close the essay with our key ‘take home’ messages from this evidence-based science communication process.

The present study was aimed at revealing the influence of the mechanical stress induced by water molecules adsorption on the composition of crystalline phases in the ZrO2–3mol%Y2O3-nanoparticles. Three basic methods have been used to determine the phase transition: neutron diffraction, Raman microspectroscopic scanning, and X-ray diffraction. The fact of phase-structural β → α transformation and the simultaneous presence of two polymorphic structural modifications (β is the phase of the tetragonal syngony and α of monoclinic syngony in nanosized particles (9nm)) under normal physical conditions was established by these methods. Satisfactory consistency was achieved between the results obtained using different techniques.

Recent developments in mid-infrared (MIR) spectroscopic ellipsometry enabled by quantum cascade lasers (QCLs) resulted in a drastic improvement in signal-to-noise ratio compared to conventional thermal emitter based instrumentation. Thus, it was possible to reduce the acquisition time for high-resolution broadband ellipsometric spectra from multiple hours to less than 1 second. This opens up new possibilities for real-time in-situ ellipsometry in polymer processing. To highlight these evolving capabilities we demonstrate the benefits of a QCL based MIR ellipsometer by investigating single and multilayered polymer films. The molecular structure and reorientation of a 2.5m thin biaxially oriented polyethylene terephtalate film is monitored during a stretching process lasting 24.5 s to illustrate the perspective of ellipsometric measurements in dynamic processes. In addition, a polyethylene/ethylene vinyl alcohol/polyethylene multilayer film is investigated at continuously varying angle of incidence ( 0∘ – 50∘) in 17.2 s, highlighting an unprecedented sample throughput for the technique of varying angle spectroscopic ellipsometry in the MIR spectral range. The obtained results underline the superior spectral and temporal resolution of QCL ellipsometry and qualify this technique as suitable method for advanced in-situ monitoring in polymer processing.

When you type” Iodine” in google scholar, you will end up with 2,200,000 articles that are titled with anything regarding iodine, except “what is it”. Here in this short note review, a summary of iodine that includes its origin, structure, types, sources, uses, concentration, toxicity, and iodine intake and how to measure it, was collected and infused in a nutshell.

For the better part of a century researchers across disciplines have sought to explain the crystallography of the elemental transition metals: hexagonal close packed, body centered cubic, and face centered cubic in a form similar to that used to rationalize the structure of organic molecules and inorganic complexes. Pauling himself tried with limited success to address the origins of transition metal stability. These early investigators were handicapped, however, by incomplete knowledge regarding the structure of metallic charge density. Here we exploit modern approaches to charge analysis to first comprehensively describe transition metal charge density. Then, we use topological partitioning and quantum mechanically rigorous treatments of kinetic energy to account for the structure of the density as arising from the interactions between metallic tetrahedra. We argue that the crystallography of the early transition metals results from charge transfer from the so called “octahedral” to “tetrahedral holes” while the face centered cubic structure of the late transition metals is a consequence of antibonding interactions that increase octahedral hole kinetic energy.

Testing in animals is mandatory in drug testing and the gold standard for evaluation of toxicity. This situation is expected to change in the future because the 3Rs principle, which stands for replacement, reduction and refinement of the use of animals in science, is reinforced by many countries. On the other hand, technologies for alternatives to animals experiments have increased. The necessity to develop and use of alternatives is influenced by the complexity of the research topic and also by the fact, to which extent the currently used animal models can mimic human physiology and/or exposure. Rodent lung morphology and physiology differs markedly for that of humans and inhalation exposure of the animals are challenging. In vitro and in silico methods can assess important aspects of the in vivo action, namely particle deposition, dissolution, action at and permeation across the respiratory barrier and pharmacokinetics. Out of the numerous homemade in vitro and in silico models some are available commercially or open access. This review discusses limitations of animal models and exposure systems and proposes a panel of in vitro and in silico techniques that, in the future, may replace animal experimentation in inhalation testing.

This paper contains a concise overview of the deployment of scattered solar power plants in Poland, mainly from the perspective of their communication networks, and how the recent development of the Polish 4G networks has a very positive impact for the performance of the whole monitoring system (production control and video-surveillance), with a special emphasis on video-analytics, due to its higher bandwidth demand. All the information will be shown from the point of view of the solar photovoltaics developer I+D Energías, and therefore it constitutes a real user’s experience.

This work studies a novel low voltage (<60 V) hybrid system that supports engine boosting and downsizing in addition to start-stop, regenerative braking, and constrained torque assist/regeneration. The hybrid power split supercharger (PSS) shares a 9 kW motor between supercharging the engine or providing hybrid functionalities through a planetary gear set, a brake and a bypass valve. The PSS operation is limited to only one of the parallel hybrid or boosting modes at a time, necessitating a highly optimized decision making algorithm to select the device mode and power split ratio. In this work an adaptive equivalent consumption minimization strategy (A-ECMS) is developed for energy management of the PSS. The A-ECMS effectiveness is compared against a dynamic programming (DP) solution with full drive cycle preview through hardware-in-the-loop experiments on an engine dynamometer testbed. The experiments show that the PSS with A-ECMS reduces a vehicle fuel consumption by 18.4% over standard FTP75 cycle compared to a baseline turbocharged engine, while global optimal DP solution decreases the fuel consumption by 22.8% compared to baseline.

We study the center of energy (CE) before and after the separation of superposed wave from a moving medium (MM). It is assumed that two out-of-phase mechanical transverse waves propagating from the opposite directions on a medium moving at non-relativistic speeds are superposed and the superposed portion (SP) is separated from the MM at that moment. We consider the CE of the SP before and after the separation from the MM. The location of CE (LCE) of the SP seems to be at the center of it at the moment of superposition. The SP rotates due to the separation from the MM since the velocity of each portion symmetric with respect to the center of the SP is equal in magnitude and opposite in direction. The magnitudes of velocities of the symmetric portions become different as soon as the SP begins to rotate with the separation from the MM. Then the energies of their symmetric portions are not the same, so the LCE of the SP is not at the center of it. As a result, the LCE of it looks different before and after the separation from the MM. We must find a solution to keep the LCE of the SP constant. We propose that two out-of-phase mechanical transverse waves (MTWs) propagating from the opposite directions on a MM originally have hidden difference in relativistic energy and it suddenly appears within the range observable in Newtonian mechanics when the SP starts rotating. This means that the point of view of hidden difference in relativistic energy is necessary to keep the LCE constant.

Perception and motor interaction with physical surroundings can be analyzed by the changes in probability laws governing two possible outcomes of neuronal activity, namely the presence or absence of spikes (binary states). Perception and motor interaction with physical environment are accounted partly by the reduction in entropy within the probability distributions of binary states of neurons in distributed neural circuits, given the knowledge about the characteristics of stimuli in physical surroundings. This reduction in the total entropy of multiple pairs of circuits in networks, by an amount equal to the increase of mutual information among them, occurs as sensory information is processed successively from lower to higher cortical areas or between different areas at the same hierarchical level but belonging to different networks. The increase in mutual information is partly accounted by temporal coupling as well as synaptic connections as proposed by Bahmer and Gupta [1]. We propose that robust increases in mutual information, measuring the association between the characteristics of sensory inputs and neural circuits connectivity patterns, are partly responsible for perception and successful motor interactions with physical surroundings. It is also argued that perception from a sensory input is the result of networking of many circuits to a common circuit that primarily processes the given sensory input.

This article makes a general analysis of the supply chain of photovoltaic systems in Colombia, taking as a starting point a conceptual base and the current situation of the country in this sector. This article especially will contemplate the non-interconnected areas (ZNI) to the electricity grid in the national, due to its complexity in the logistics issues. Likewise, the work performs a graphical representation of the stages and processes of the supply chain using a powerful-modeled tool such as the Petri Nets (PNs). Finally, it identifies some of the flaws in the operation and the joint of all the links of the logistic part and from there it is based the importance of the strategy of orientation to the supply chain (SCO) as a possible alternative to improve and to enhance the logistic processes of this type of systems.

Since their discovery in 1993, numerous microRNAs (miRNAs) have been identified in humans and other eukaryotic organisms, and their role as key regulators of gene expression is still being elucidated. It is now known that miRNAs not only play a central role in the processes that ensure normal development and physiology, but they are often dysregulated in various diseases. In this review, we present an overview of the role of miRNAs in normal renal development and physiology, in maladaptive renal repair after injury, and in the pathogenesis of renal parenchymal diseases. In addition, we describe methods used for their detection and their potential as therapeutic targets. Continued research on renal miRNAs will undoubtedly improve our understanding of diseases affecting the kidneys and may also lead to new therapeutic agents.

The first part of this paper contains a brief description of the beginnings of modern cosmology, which, the author will argue, was most likely born in the Year 1912. Some of the pieces of evidence presented here have emerged from recent research in the history of science, and are not usually shared with the general audiences in popular science books. In special, the issue of the correct formulation of the original Big Bang concept, according to the precise words of Fred Hoyle, is discussed. Too often, this point is very deficiently explained (when not just misleadingly) in most of the available generalist literature. Other frequent uses of the same words, Big Bang, as to name the initial singularity of the cosmos, and also whole cosmological models, are then addressed, as evolutions of its original meaning. Quantum and inflationary additions to the celebrated singularity theorems by Penrose, Geroch, Hawking and others led to subsequent results by Borde, Guth and Vilenkin. And corresponding corrections to the Einstein field equations have originated, in particular, R², f(R), and scalar-tensor gravities, giving rise to a plethora of new singularities. For completeness, an updated table with a classification of the same is given.

The present work aims to demonstrate that colloidal dispersions of magnetic iron oxide nanoparticles stabilized with dextran macromolecules placed in an alternating magnetic field can not only produce heat, but also that these particles could be used in vivo for local and non-invasive deposition of a thermal dose sufficient to trigger thermo-induced gene expression. Iron oxide nanoparticles were first characterized in vitro on a bio-inspired setup, and then they were assayed in vivo using a transgenic mouse strain expressing the luciferase reporter gene under transcriptional control of a thermosensitive promoter. Iron oxide nanoparticles dispersions were applied topically on the mouse skin or injected sub-cutaneously with Matrigel™ to generate so called pseudo tumors. Temperature was monitored continuously with a feedback loop to control the power of the magnetic field generator and to avoid overheating. Thermo-induced luciferase expression was followed by bioluminescence imaging 6 hours after heating. We showed that dextran-coated magnetic iron oxide nanoparticles dispersions were able to induce in vivo mild hyperthermia compatible with thermo-induced gene expression in surrounding tissues and without impairing cell viability. These data open new therapeutic perspectives for using mild magnetic hyperthermia as non-invasive modulation of tumor microenvironment by local thermo-induced gene expression or drug release.

In this article, we investigate both the Schrödinger and continuity equations in the presence of nonlocal potential that arising from electron-electron interaction and local one in the context of minimal uncertainty in momentum within commutative and noncommutative frameworks. Furthermore, the Frahn–Lemmer potential type is used. Interestingly, the combined effects of both the phase-space noncommutativity and nonlocality on the current density while considering a minimal uncertainty in momentum are examined. We find that the current density, as conventionally defined, does not fulfil the condition of current conservation, thus, a new definition of the current density that encompasses the aforementioned contributions is given. Thereafter, it is shown that the computed current using the new definition of the current density satisfies the current conservation. Noting that using both the $★$product and linear Bopp-Shift, the noncommutativity is inserted.

Background: Numerous risk factors have been recognized as significant contributors to outdoor workers' heat stress and the risk of heat-related conditions, impacting their health, well-being, and productivity. However, the specific effects of these factors on construction workers' safety, health, and well-being remain under-researched. With climate change increasing temperatures, assessing heat stress among construction workers is imperative. Objective: To identify the barriers and facilitators influencing the safety of natural gas construction workers and evaluate an implemented heat stress intervention. Methods: In the summer of 2023, two semi-structured interviews and six focus groups were conducted with twenty-one stakeholders at a Texas natural gas construction site. Results: Key facilitators include employee preparedness, use of employer-provided resources, hydration logs, and real-time communication tools. Contrarily, the barriers include daily work schedules, access to dehydrating beverages, and generational differences with the non-implementation of mandatory rest breaks. The heat stress program was perceived as effective, surpassing recommended guidelines. Conclusion: To advance construction workers’ safety, health, and well-being, both employee involvement and employer management are needed, along with no-cost accessible resources. Additionally, implementing a required routine rest break and comprehensive heat stress education, particularly for older workers, will significantly promote safety and safe work practices in hot environments.

Sodium phenyl dithiocarbamate (pl-dtc) as a ligand was prepared from the reaction of aniline (C6H5-NH2) and carbon(IV) sulfide (CS2) in the presence of sodium hydroxide via method of one-pot synthesis. Two coordination compounds ([VO(sfz)(pl-dtc)] and [Zn(sfz)(pl-dtc)]) from respective oxovanadium (IV) sulfate hydrate and zinc (II) chloride were prepared with mixed ligands involving sodium sulfadiazine (sfz) and the synthesized pl-dtc crystals, also via the method of one-pot synthesis. Structural analyses of the ligand and coordination compounds were assessed using characterization techniques involving physicochemical parameters and spectral analysis ( FT-IR, UV-Vis and NMR (1H NMR and 13C NMR) to confirm their synthenses and structures. Additionally, pl-dtc crystals which grew from the pl-dtc solution when refrigerated after five days, has its structure confirmed and revealed when subjected to single crystal x-ray crystallography technique. Differences in results of spectral analysis between ligands and their respective coordination compounds confirmed the coordination between ligands and coordination compounds. The in vitro antibacterial studies showed that the ligands had modest activity against Gram positive bacteria: Staphylococcus aureus, while, the coordination compounds had modest activities against the Gram negative bacteria: Escherichia coli when compared with ligand of pl-dtc.

Pulmonary hypertension (PH) has a high mortality, and few treatment options. Adaptive immune mediators of PH in mice challenged with antigen/particulate matter (antigen/PM) has been the focus of our prior work. We identified key roles of type 2 and type 17 responses in C57BL/6 mice. Here, we focused on type 2 response related cytokines, specifically Resistin-like-molecule (RELM)α, a critical mediator of hypoxia-induced PH. Because of strain differences in the immune responses to type 2 stimuli, we compared C57BL/6J and BALB/c mice. A model of intraperitoneal antigen sensitization with subsequent, intranasal challenges with antigen/PM (ovalbumin and urban ambient PM2.5) or saline was used in C57BL/6 and BALB/c wild type or RELMα-/- mice. Vascular remodeling was assessed by histology, right ventricular (RV) pressure, RV weights and cytokines were quantified. Upon challenge with antigen/PM2.5, both C57BL/6 and BALB/c mice developed pulmonary vascular remodeling; these changes were more prominent in the C57BL/6 strain. Compared to wild type mice, RELMα-/- had significantly reduced pulmonary vascular remodeling in BALB/c, but not in C57BL/6 mice. RV weights, RV IL-33 and RV ST2-IL-33-receptor were significantly increased in BALB/c wild type mice, but not in BALB/c-RELMα-/- or in C57BL/6-wild type or C57BL/6-RELMα-/- mice. RV systolic pressures (RVSP) were higher in BALB/c compared to C57BL/6J mice, and RELMα-/- were not different from their respective wild type controls. In BALB/c mice, RELMα was a key contributor to antigen/PM2.5 induced pulmonary vascular remodeling, RV thickening and RV cytokine responses, highlighting the significance of the genetic background. The RELMα-/- animals demonstrated significantly decreased expression of RELMβ and RELM which makes these mice comparable to a situation where human RELMα levels would be significantly modified, as humans only have one RELM molecule.

The object of this work is to determine the correlation on the Nusselt number on the individual rows of a four-row tubular finned heat exchanger with continuous fins with a staggered tube arrangement using CFD modelling. Correlations for calculating Darcy-Weisbach friction factors on individual tube rows were also determined. Relationships for the Nusselt number and friction factor derived for the entire exchanger based on CFD modelling were compared with those available in the literature determined using experimental data. The maximum relative differences between the Nusselt number for a four-row exchanger determined experimentally and by CFD modelling are in the range from 22% for a Reynolds number based on a tube's outside diameter of 1,000 to 30% for a Reynolds number of 13,000. The maximum relative differences between the friction factor for a four-row exchanger determined experimentally and by CFD modelling are in the range of 50% for a Reynolds number based on a tube outer diameter of 1,000 to 10% for a Reynolds number of 13,000. The CFD modeling performed shows that in the range of Reynolds numbers based on hydraulic diameters from 150 to 1,400, the Nusselt number for the first row in a four-row finned heat exchanger is about 22% to 15% higher than the average Nusselt number for the entire exchanger. In the range of Reynolds number changes based on hydraulic diameter from 2,800 to 6,000, the Nusselt numbers on the first and second rows of tubes are close to each other. Correlations on Nusselt numbers and friction factors derived for individual tube rows can be used in the design of plate-fin and tube heat exchangers used in equipment such as air-source heat pumps, automotive radiators, air-conditioning systems and in air hot-liquid coolers. In particular, the correlations can be used to select the optimum number of tube rows in the exchanger.

As education continues to evolve in response to technological advancements, the concept of Education 5.0 has gained prominence. However, it is crucial to critically analyze the limitations and challenges of this model. This article presents a comprehensive examination of Education 5.0, identifies its drawbacks, and proposes a vision for Education 6.0. Through insightful case studies and discussions, this article aims to provide a nuanced perspective on the future of education.

Women have been leading organizations and communities for centuries, but their journeys in leadership have sometimes been challenging. This paper aims to reflect on women's positive and negative experiences in leadership roles and understand the factors contributing to their successes and challenges.To explore these issues, we will draw on various academic literature, including studies on gender and leadership and case studies of women in leadership positions. We will also examine the cultural and social factors that affect women's experiences in leadership, including bias and discrimination, societal expectations, and work-life balance challenges.One key theme from this analysis is the importance of role models and support networks in helping women succeed in leadership roles. Women with access to mentorship, sponsorship, and peer networks are more likely to thrive in their roles and overcome the challenges they may face. However, lacking female role models and mentors can make it difficult for women to advance in their careers and contribute to feelings of isolation and imposter syndrome.Another important theme is the need for organizations and society to address systemic biases and discrimination that prevent women from reaching their full potential. This can include initiatives such as unconscious bias training, flexible work arrangements, and policies that support gender diversity and inclusion.In conclusion, this paper highlights women's positive and negative experiences in leadership roles and emphasizes the need for ongoing efforts to support and empower women in leadership. By addressing the challenges women face and building a culture of inclusion and support, organizations and society can help unlock the full potential of women leaders and create a more equitable and just world.

This study explores the limitations of current AI systems, which predominantly function in the digital realm, and investigates the transformative potential of embodied AI. Embodied AI involves AI agents equipped with physical bodies, enabling them to interact directly with the physical world. This research focuses on how embodied AI can bridge the "embodiment gap" and enhance human-machine collaboration and learning in dynamic environments. The research examines the fundamental differences between traditional AI systems and embodied AI, emphasizing the importance of physical interaction for contextual understanding, adaptive learning, and intuitive human-machine collaboration. It explores various applications of embodied AI, including robotics, autonomous vehicles, and assistive technologies, demonstrating how physical embodiment can improve performance, safety, and user experience. Through experimental studies and real-world case analyses, the study highlights the advantages of embodied AI in tasks requiring situational awareness, dexterity, and real-time decision-making. It also addresses the challenges associated with developing and deploying embodied AI systems, such as sensor integration, real-time processing, and human-machine interface design. Findings indicate that embodied AI can significantly improve the efficacy of AI systems in dynamic and unpredictable environments. By leveraging physical embodiment, AI agents can better understand and respond to their surroundings, facilitating more natural and effective interactions with humans. The research concludes with recommendations for advancing embodied AI, including interdisciplinary collaboration, investment in sensor and actuator technologies, and the development of standardized frameworks for embodied intelligence.

Background: Transcatheter aortic valve replacement (TAVR) is a proven treatment for severe aortic stenosis (AS). Transfemoral access is the most prevalent method, achieved either surgically or percutaneously. This study compares in-hospital outcomes and length of stay between surgical cut-down and fully percutaneous approaches. Methods: This retrospective, propensity-matched study analyzed medical records of all patients who underwent transfemoral TAVR at our center from January 2019 to December 2023. Outcomes were assessed based on Valve Academic Research Consortium-2 (VARC-2) consensus criteria. Results: 251 TAVR patients (77 propensity score matching pairs) were included (55% female) with a median (IQR) age of 80 (11) years. Surgical cut-down showed fewer vascular complications, bleeding, and transfusions. No death, stroke, atrial fibrillation (AF), or need for pacemaker was reported in this group. Fewer mean hospitali-zation days were observed in the total cohort over the years (p< 0.001). This reduction was more pronounced after 2021 when the surgical approach was adopted. Mean hospitalization days were 6.40 ±6.46 for percutaneous and 4.34 ±1.61 for surgical groups (p< 0.001). Conclusions: Surgical cut-down for TAVR femoral access yields superior outcomes and shorter hospital stays compared to fully percutaneous methods.

In this paper, we introduce a control method for the linear quadratic tracking (LQT) problem with zero steady-state error. It is achieved by augmenting the original system with an additional state representing the integrated error between the reference and actual outputs. In its essence, it is a linear quadratic integral (LQI) control embedded in a general LQT control framework, with the reference trajectory generated by a linear exogenous system. During the simulative implementation for the specific real-world system Car-in-the-Loop (CiL) test bench, we assume that the 'real' system is completely known. Therefore, for the model-based control, we can have a perfect model identical to the 'real' system. It becomes clear that stable solutions can scarcely be achieved with controller designed with the perfect model of the 'real' system. Contrary, we show that a model learnt via Bayesian Optimization (BO) can facilitate a much bigger set of stable controllers. It exhibits an improved control performance. To the best of the authors' knowledge, this discovery is the first in the LQT related literature.

An emissions baseline for a city is the foundation to building an informed clean air action plan. This includes an understanding of the sources and their intensities to device cost-effective measures with the least health impacts. In an urban environment, emissions from road transport is one of the major contributors to the air pollution problem, and accounting for this sector requires a detailed profile of in-use vehicles, covering their age-mix, usage, and fuel economy. In this paper, we present a simplified framework to survey at select fuel stations to establish the necessary inputs and use them to build a localized vehicle emissions inventory. The methodology is illustrated with an application in the city of Patna, India. Here, the FuSS was employed to profile the in-use passenger vehicle characteristics by 19 trained students, over nine days and at ten fuel stations, to collect 9,775 survey points. The methodology outlined in this paper, along with the tools and training framework, is also replicable in settings other than the fuel stations.

The objective of this research is to analyze metal elements like Na (sodium), Mg (magnesium), Al (aluminum), Si (silicon), Pb (lead), K (potassium), Ca (calcium), and Fe (iron) found in dust particles within two distinct areas from which the sampling has been done. First sampling was taken from the road verge of a highly trafficked road section, while the second sampling was done in a residential garden area 90 m away from the road. Several metal elements have been detected, with a high difference for Silicon Si, which present higher concentrations in the dust sampled from the road verge area. Pb has only been detected in the samples taken from the road verge, which could be explained by residual remnants from old lead gasoline, and wheel weights. Additionally, airborne particulate matter (PM) concentrations have been measured, during the same episode, in comparison between the road verge and the garden area, presenting a substantial difference in the concentration levels, deducing that dense vegetation is protecting and blocking a majority of airborne PM. A literature highlight of health effects of different metal elements and PM concentrations is presented.

Infectious keratitis (IK) is among the top 5 leading causes of blindness globally. Early diagnosis is key to guide an appropriate therapy to avoid complications such as vision impairment and blindness. Culture of corneal scrapes is the initial diagnostic test to grow and identify the causal organism. Alternative diagnostic tools include imaging such as with optical coherence tomography (OCT) and in vivo confocal microscopy (IVCM). OCT’s advantage is its ability to accurately determine the depth and extent of the corneal ulceration, infiltrates and haze; therefore, characterizing the severity and progression of the infection. However, it is not a preferred choice in the diagnostic tool package for infectious keratitis. IVCM is a great aid in the diagnosis of fungal and Acanthamoeba keratitis with overall sensitivities of 66-74% and 80-100%, and specificity of 78-100% and 84-100%, respectively. Recently the use of deep learning (DL) models in IK has been shown to aid diagnosis via image recognition. Most of the studies that have developed DL models to diagnose the different types of IK have utilised photographs from digital camaras, slit-lamp images, or IVCM images. Some studies have used extremely efficient single DL algorithms to train their models and others used ensemble approaches. This technology is likely to assist in the diagnosis of IK in some years. Further work is needed to examine and validate the clinical performance of the DL models in the real-world setting and to evaluate whether this technology improves patient clinical outcomes. The scope of this review was to provide a recent update on the diagnostic imaging tools in IK

In Japan, where the working population is declining, there is a growing expectation that the potential working population will play an active role, and in this context, administrative measures such as the promotion of women's activities have been implemented. However, there is no end to the number of women who leave the workforce after life events such as childbirth or child rearing.　For example, in Fukuoka Prefecture (population 5.1 million) alone, where we are based, it is estimated that there are 43,300 potential female workers. Many of these women have have been employed in the past, but have left the workforce due to childbirth, family care, or other reasons, and still wish to work. However, although this group has potential employment needs, they have not yet engaged in specific job-hunting activities, and thus are on the periphery of the labor market, without access to the current active labor market. There are many promising potential employees there, and support for their career redevelopment and participation in the labor market is required. On the other hand, few studies have been conducted in Japanese prefectures to systematically estimate social value, i.e., to determine the scope of impact on society and the stakeholders. This is an obstacle to the formulation of policies for women's advancement and the establishment of related social projects. This paper is aware of this problem and, based on the support for women seeking to re-enter society (career redevelopment) that the authors are implementing, selects seven prefectures in Kyushu, which is also a wide economic zone, as a support area and estimates the social value to companies and families in these areas by using SROI. As a result, it was derived that if 3,586 individuals were reemployed, the SROI ratio (1:X) X would be 76.1 in the first year of reintegration assistance activities and X would be 313.3 in the fourth year.

This research paper presents an enhanced economic load dispatch (ELD) approach using the Teaching-Learning-Based Optimization (TLBO) algorithm for 10 thermal units, examining the impact of Plug-in Electric Vehicles (PEVs) in different charging scenarios. The TLBO algorithm is utilized to optimize the ELD problem, considering the complexities associated with thermal units. The integration of PEVs in the load dispatch optimization is investigated, and different charging profiles and probability distributions are defined for PEVs in various scenarios, including overall charging profile, off-peak charging, peak charging, and stochastic charging. These tables allow for the modeling and analysis of PEV charging behavior and power requirements within the power system. By incorporating PEVs, additional controllable resources are introduced, enabling more effective load management and grid stability. The comparative analysis showcases the advantages of the TLBO-based ELD model with PEVs, demonstrating the potential of coordinated dispatch strategies leveraging PEV storage and controllability. This paper emphasizes the importance of integrating PEVs into the load dispatch optimization process, utilizing the TLBO algorithm, to achieve economic and reliable power system operation while considering different PEV charging scenarios.

This article purposed to examine the impact of integration between Lean accounting (LA) tools & Just in Time (JIT) technique on Cost Reduction (CR) in modern manufacturing environment in Saudi establishments, these two variable moderated by Ethical Standards (ESs). A quantitative methodology was used for realizing the study objectives and answering study questions, the main tool exercised for producing the incipient data was a fully-structured questionnaire with closed ended questions, which was designed and passed around online among a selected sample of (109) managers and accountants in Saudi manufacturing firms. Descriptive and deductive statistics adopted to derive the findings, wherefore the compiled responses analyzed by SPSS & AMOS and the results showed that there is direct and indirect effect of LA tools & JIT technique on CR in Saudi industrial companies, especially when using ESs. These findings could provide decision makers in Saudi manufacturing companies with the acuity of adopting both methods in a combined way to maximize the profits of these firms. The results of this study also suggest that the application of LA tools & JIT technique has a positive effect on the promotion of sustainable manufacture and consequent achievement of high sustainable performance.

Anti-islet autoantibodies serve as key markers in immune-mediated type 1 diabetes (T1D) and slowly-progressive T1D (SPIDDM), also known as latent autoimmune diabetes in adults (LADA). Autoantibodies to insulin (IAA), glutamic acid decarboxylase (GADA), tyrosine phosphatase-like protein IA-2 (IA-2A), and zinc transporter 8 (ZnT8A) are currently employed in the diagnosis, pathological analysis, and prediction of T1D. GADA can also be detected in non-diabetic patients with autoimmune diseases other than T1D and may not necessarily reflect insulitis. Conversely, IA-2A and ZnT8A serve as surrogate markers of pancreatic β-cell destruction. Combinatorial analysis of these four anti-islet autoantibodies demonstrated that 93-96% of acute-onset T1D and SPIDDM cases were diagnosed as immune-mediated T1D, while the majority of fulminant T1D cases were autoantibody-negative. Evaluating the epitopes and immunoglobulin subclasses of anti-islet autoantibodies help distinguish between diabetes-associated and non-diabetes-associated autoantibodies and is valuable for predicting future insulin deficiency in SPIDDM (LADA) patients. Additionally, GADA in T1D patients with autoimmune thyroid disease reveals the polyclonal expansion of autoantibody epitopes and immunoglobulin subclasses. Recent advancements in anti-islet autoantibody assays include nonradioactive fluid-phase assays and the simultaneous determination of multiple biochemically defined autoantibodies. Developing a high-throughput assay for detecting epitope-specific or immunoglobulin isotype-specific autoantibodies will facilitate more accurate diagnosis and prediction of autoimmune disorders.

We continue in this paper to illustrate the implications of the Dual Model of Liquids (DML) by deriving the expression for the isochoric specific heat as function of the collective degrees of freedom available at a given temperature and analyzing its dependence on temperature. Two main tasks will be accomplished. First, we show that the expression obtained for the isochoric specific heat in the DML is in line with the experimental results. Second, the expression will be compared with the analogous one obtained in another theoretical dual model of the liquid state, the Phonon Theory of Liquid Thermodynamics. This comparison will allow to get interesting insights about the number of collective degrees of freedom available in a liquid and on the value of the isobaric thermal expansion coefficient, two quantities that are related to each other in this framework.

Wearable and mobile technology has advanced in leaps and bounds in the last decade with technological advances creating a role from enhancing healthy living to monitoring and treating disease. However, the discussion about the ethical use of such commercial technology in the community, especially in minors, is lacking behind. In this paper, we first summarize the major ethical concerns that arise from the usage of commercially available wearable technology in children, with a focus on smart watches, highlighting issues around the consent process, mitigation of risk and potential confidentiality and privacy issues, as well as the potential for therapeutic misconceptions when used without medical advice. Then through a relevant thought experiment we move on to outline some further ethical concerns that are connected to the use of wearables by minors, to wit the issue of informed consent in the case of minors, forcing them to live in the spotlight, and compromising their right to an open future. We conclude with the view that mitigating potential pitfalls and enhancing the benefits of wearable technology especially for minors requires brave and comprehensive moral debates.

We compare Chiral Perturbation Theory (ChPT) and the Linear Sigma Model (LSM) as realizations of low energy QCD for light mesons in a chirally imbalanced medium. The relations between the low-energy constants of the Chiral Lagrangian and the corresponding constants of the Linear Sigma Model are established as well as the expressions for the decay constant of $\pi $-meson in the medium and for the mass of the $a_0$. In the large $N_c$ count taken from QCD the correspondence of ChPT and LSM is remarkably good and give a solid ground for search of chiral imbalance manifestation in pion physics. A possible experimental detection of chiral imbalance (and therefore a phase with Local Parity Breaking) is outlined in the charged pion decays inside the fireball.

The research objectives was to determine the plants vegetation profile in forest revegetation and Mount Arjuna springs. The method used was descriptive method. While based on the techniques and tools used to research, the author uses the survey method to obtain facts that occur in the research area, namely in the area around the springs of Arjuna mount, Pasuruan, East Java, Indonesia. Data obtained in the field are then processed and analyzed using GIS, ArcView 3.3 and Google Earth programs. The results of the study explain the profile of plant vegetation, namely plant stratification, bird wealth, taxonomic wealth and plant density have a significant effect on forest revegetation and springs in Arjuna mount. The forest vegetation profile has a positive and significant effect on the preservation of springs. The better the profile of forest vegetation, the preservation of springs will be better, and vice versa.

Recently, Kayyalha et al. (Phys. Rev. Lett., 2019, 122, 047003) reported on anomalous enhancement of the self-field critical currents, I_c (sf,T), at low temperatures in Nb/BiSbTeSe₂-nanoribbon/Nb Josephson junctions. The enhancement was attributed to the low-energy Andreev bound states arising from winding of the electronic wave function around the circumference of the topological insulator BiSbTeSe₂ nanoribbon. In this paper, we show that identical enhancement in I_c(sf,T) and in the upper critical field, B_c2(T), at approximately same reduced temperatures, were reported by several research groups in atomically thin junctions based on a variety of Dirac-cone materials (DCM) earlier. Our analysis shows that in all these S/DCM/S systems the enhancement is due to a new superconducting band opening. Taking in account that several intrinsic superconductors also exhibit the effect of new superconducting band(s) opening when sample thickness becomes thinner than the out-of-plane coherence length, we strength our previous proposal that there is a new phenomenon of additional superconducting band(s) opening in atomically thin films.

This work communicates a review on Balmer series hydrogen beta line measurements and applications for analysis of white dwarf stars. Laser-induced plasma investigations explore electron density and temperature ranges comparable to white dwarf star signatures such as Sirius B, the companion to the brightest star observable from the earth. Spectral line shape characteristics of the hydrogen beta line include width, peak separation, and central dip-shift, thereby providing three indicators for electron density measurements. The hydrogen alpha line shows two primary line-profile parameters for electron density determination, namely, width and shift. Both Boltzmann plot and line-to-continuum ratios yield temperature. The line-shifts recorded with temporally- and spatially- resolved optical emission spectroscopy of hydrogen plasma in laboratory settings can be larger than gravitational redshifts that occur in absorption spectra from radiating white dwarfs. Published astrophysical spectra display significantly diminished Stark or pressure broadening contributions to red-shifted atomic lines. Gravitational redshifts allow one to assess the ratio of mass and radius of these stars, and subsequently, the mass from cooling models.

This paper proposes the impact of plug-in electric vehicles integrated into power distribution system based on voltage dependent control. The plug-in electric vehicles was modeled as the static load model in power distribution systems under balanced load condition. The power flow analysis is determined by using the basic parameters of the electrical network. The main point of this study are compare with voltage magnitude profiles, load voltage deviation, and total power losses of the electrical power system. There are investigating the affected from constant power load, constant current load, constant impedance load and plug-in electric vehicles load, respectively. The IEEE 33 bus test system is used to test the proposed method by assigning each load type to a balanced load in steady state and applied the solving methodology based on the bus injection to branch injection matric, branch current to bus voltage matrix, and current injection matrix to solve the power flow problem. The simulation results showed that the plug-in electric vehicles load had the lowest impact compared to other loads. The lowest plug-in values for the electric vehicle loads were 0.062, 119.67 kW and 79.31 kVar for the load voltage deviation, total active power loss and total reactive power loss, respectively. Therefore, this study can be verified that the plug-in electric vehicles load were affected to the lowest of the electrical power system in condition to same sizing and position. So that, in condition to the plug-in electric vehicles load added into the electrical power system with the conventional load type or complex load type could be considered that the affected from the plug-in electric vehicles load in next study.