The American leafhopper Erasmoneura vulnerata, detected in Europe in early 2000s, has recently become a pest in North-Italian vineyards. Issues were recorded in organic and conventional vine-yards despite the application of insecticides devoted to the control of other pests. Erasmoneura vulnerata completes three generations, and the second generation is frequently associated to large populations. The selection of appropriate active ingredients and the timing of their application is crucial for effective pest control. Field trials were carried out in North-eastern Italy, using a randomized design, to evaluate the impact of insecticides applied against other grapevine leafhoppers on E. vulnerata populations. The beginning of the second generation was selected as best timing for insecticide application. For a number of natural products, two applications were planned. Among the selected insecticides, the most effective were acetamiprid, flupyradifurone and lamb-da-cyhalothrin. Regarding natural products, the most effective was kaolin that could represent an alternative to pyrethrins in organic vineyards. The identification of pest threshold levels and the evaluation of side effects of the most effective insecticides on key natural enemies occurring in vineyards are required

In January 2020, the World Health Organization declared a public health emergency and announced a new coronavirus disease (COVID-19), which would later go on to be declared as a pandemic, changing the global sphere and placing the economies of almost all countries under heavy stress. The airline industry, that had just begun recovering after facing crises one after another in the last two decades, from early 2000 due to 9/11, to the global financial crisis later, is now oce again facing an enormous challenge of closed borders and greater lockdowns due to the pandemic. Borders are closed, with very few planes are in the air, while the rest are grounded. The purpose of this paper is to give a conceptual understanding of the current pandemic situation and its consequences on the airline industry. The paper takes a unique perspective of human resource management (HRM) that is rarely used in the airline industry.

The present article proposes a complete framework for Supply Chain Strategy (SCS) analysis that is adapted to the specific characteristics of the agrifood chain, thereby facilitating management of the former. As a specific case of analysis, the horticultural supply chain, originating in Spain and ending with the European consumer, is analyzed, taking as a reference the marketing companies at origin (mainly social economy companies, i.e.; cooperatives). In addition, a survey of marketing companies is conducted to possibly determine which explicit cooperative growth strategies may include horizontal and vertical collaboration relationships with other members of the chain. The aim is to analyze with whom the cooperative collaborates within the supply chain and the key points of such collaboration. A model analyzing the influence of collaboration on company performance is also considered. The results reveal that, in recent years, aspects related to quality and health have been surpassed and replaced by the concept of sustainability within a framework of collaboration with customers. In any case, it becomes evident that there is a need to expand collaboration within the chain by incorporating the supplier of the supplier, with the aim of making the chain more profitable.

The resource curse indicates that economic growth performs poorly in countries with significant natural resources. Nevertheless, certain countries rich in energy managed to protect their resource riches in the long run. It is necessary to enforce effective policies in resource-rich countries to fully leverage the advantages which can come from the abundance of natural resources. This study aimed to evaluate how oil-rich countries would avoid resource flows by successful fiscal and management policies. By taking the guidance of Norway and implementing fiscal policy focused on tax rules on its oil management, it is proposed that oil-exporting countries benefit significantly. The framework attempts to mitigate this resource curse and utilise oil revenues in the interest of the country.

In the information age today, data are getting more and more important. While other industries achieve tangible improvement by applying cutting edge information technology, the construction industry is still far from being enough. Cost, schedule, and performance control are three major functions in the project execution phase. Along with their individual importance, cost-schedule integration has been a significant challenge over the past five decades in the construction industry. Although a lot of efforts have been put into this development, there is no method used in construction practice. The purpose of this study is to propose a new method to integrate cost and schedule data using big data technology. The proposed algorithm is designed to provide data integrity and flexibility in the integration process, considerable time reduction on building and changing database, and practical use in a construction site. It is expected that the proposed method can transform the current way that field engineers regard information management as one of the troublesome tasks in a data-friendly way.

In the last decades, we have witnessed a spectacular information explosion over the Internet. Millions of users are consuming the Internet through various services, such as mobile applications, and online games. The service providers, at the back-end side, are supported by state-of-art infrastructures. Targeting on providing the services at scale, virtualization is one of the emerging technologies used in data centers and cloud environments to improve the quality of services. In this project, we aim to develop a dynamic resource management scheme based on virtual containers. It collects the runtime job progress from the running tasks and allocates the resources dynamically to improve the overall system performance.

This work investigates the utility of the National Oceanic and Atmospheric Administration’s National Water Model (NWM) for water management operations by assessing the total inflow into a select number of reservoirs across the Central and Western U.S. Total inflow is generally an unmeasured quantity, though critically important for anticipating both floods and shortages in supply over a short-term (hourly) to sub-seasonal (monthly) time horizon. The NWM offers such information at over 5,000 reservoirs across the U.S., however, its skill at representing inflow processes is largely unknown. The goal of this work is to understand the drivers for both well performing and poor performing NWM inflows such that managers can get a sense of the capability of NWM to capture natural hydrologic processes and in some cases, the effects of upstream management. We analyzed the inflows for a subset of Bureau of Reclamation (BoR) reservoirs within the NWM over the long-term simulations (retrospectively, seven years) and for short, medium and long-range operational forecast cycles over a one-year period. We utilize ancillary reservoir characteristics (e.g. physical and operational) to explain variation in inflow performance across the selected reservoirs. In general, we find that NWM inflows in snow-driven basins outperform those in rain-driven, and that assimilated basin area, upstream management, and calibrated basin area all influence the NWM’s ability to reproduce daily reservoir inflows. The final outcome of this work proposes a framework for how the NWM reservoir inflows can be useful for reservoir management, linking reservoir purposes with the forecast cycles and retrospective simulations.

In no-tillage systems, there is an accumulation of crop residues (CR) which plays an important role in available of soil-N. A study was set up to provide information regarding the CR N credit, and the influence of N mineral fertilizer. An incubation was run in a loam soil with addition of a similar rate of residue (10 Mg ha-1; sugarcane, soybean, and brachiaria) and N mineral fertilizer (urea; 120 kg N ha-1). After the stabilization of biological activity, soil and remaining residues were collected, and N monitored. Results showed that the N credit was positive with application of soybean, sugarcane, and brachiaria. There was an expressive performance of soybean N credit represented by a positive balance, and a reduction from 2.49 to 0.9 g kg-1 of N in residue, with direct increase of 90% of soil-N. There is no need of N fertilizer to potentialize the soybean N credit, but it is requested to potentialize N credit of brachiaria and sugarcane. The urea demonstrated be a good enhancer of brachiaria N credit, but it was not adequate to sugarcane residues. Based in our result, the accumulation and incorporation of CR can be considered as a N credit with positive contribution in soil-N.

Telehealth has been playing a progressively major role in the management of the NCOVID-19 crisis. The enforcement of social distancing measures has had the consequence of reduced technology distance in almost every walk of life. In this paper, based primarily on the still unfolding experiences of deploying it during the current situation, we argue that telehealth has finally come of age and that it is time to move it from the peripheries to the center of the 21st century healthcare. To provide a live context to the discussion, several instances of how telehealth strengthened our healthcare systems during the NCOVID-19 crisis are presented.

Nerve hydrodissection (HD), a technique used when treating nerve entrapments, involves using an anesthetic or solution such as saline or 5% dextrose solution to separate the nerve from the surrounding tissue, fascia, or adjacent structures. This technique aims to treat neuropathic pain, or pain caused by the nerve. Ultrasound-guided HD of peripheral nerves has gained significant attention in the medical profession and pain management fields in recent years. This is due to a number of high impact publications of randomized control trials demonstrating the efficacy and safety of this technique for the treatment of carpal tunnel syndrome. Even the 20th edition of Harrison’s Principles of Internal Medicine textbook lists injection of 5% dextrose as an alternative local treatment that does not have the side effects of corticosteroids. At present, there is no review of the current literature on this technique. This manuscript will summarize and discuss the following: 1) the different approaches to doing ultrasound-guided HD of nervous structures, 2) its usages in different clinical situations, 3) its clinical pearls, 4) the solution used, and 5) the postulated mechanisms of action.

This study investigates how the determinants including risk preference affect farmers’ decision to adopt SLM practices in upland areas of Vietnam. Empirical data collected through in-depth interviews with 200 farmers in Na Ri district, Bac Kan province were used. The factors affecting SLM adoption of farmers in Na Ri district were examined by the 2SLS or IV-Probit model. The estimated 2SLS regression indicated that there is a set of factors affecting SLM adoption, namely, relative risk aversion, farming experience, farm size, knowledge of SLM, membership in farmers’ organization, number of labors, and slope of farm land. Specifically, relative risk aversion had a negative effect on SLM practices adoption. The farmers who are less risk averse are more likely to adopt more SLM practices. This implies that reducing farmer’ risk exposure could promote SLM practices. This result is also helpful for policymakers to understand farmers’ behaviors and promote the diffusion of SLM practices across regions on a large scale.

Abstract Background: Chronic pain is common among older adults and is associated with adverse physical and psychological outcomes. Given the expected burden and limited healthcare resources, an innovative and cost-effective method to manage chronic pain should be developed. Peer volunteers (PVs) have been used as an affordable alternative to professional services to help patients manage their chronic conditions including pain with success and acceptance. The aim of this paper is to explore the experiences and perceptions of PVs in a peer-led pain management program among nursing home residents. Methods: This longitudinal study formed part of a wider research study, a clustered randomised controlled trial, which investigates the effectiveness of a 12-week peer-led pain management program (PAP) in relieving chronic pain and enhancing pain self-efficacy among nursing home residents. Quantitative data were collected from questionnaires (demographics, pain situation and pain knowledge) for all PVs. Qualitative data (PVs’ experiences in leading the PAP, their perceived benefits, limitations and barriers encountered, its usefulness to the participants and recommendations for improving the PAP) were collected from focus group for a selected sample at baseline (before attending the training) and at week 12 (upon completion of the PAP). Data were analysed using the Statistical Package for Social Sciences and NVivo 8. Results: A total of 46 PVs were recruited (34 female, 74%), with mean±SD age of 61.0±5.1 years. Thirty-one PVs reported to have chronic pain. Before the training, self-rated pain knowledge was 39.1±20.4 (maximum 100 points). When actual pain knowledge was assessed, a mean pain knowledge score of 86.1±10.6 points was found. There was a significant difference between the self-rated pain knowledge and the pain knowledge score (p<0.001). PVs reported to have improvement in their knowledge and skills. No PVs reported negative comments regarding their role in the PAP, although experienced barriers such as communication, space and privacy were reported. Conclusions: This study provides further evidence that peer-led pain management program is feasible. Barriers identified may benefit the design and planning of future PAP. Trial registration: ClincalTrials.gov (NCT03823495), 30 January 2019. (Retrospectively registered).

In this research paper we describe the development phase of a low-cost LoRa IoT solution applied to a kindergarten school with three years results. A set of sensors solution was developed in a LoRa communication board, battery powered, providing a simplified setup process. These sensors were used in order to measure temperature, humidity, luminosity, air quality and presence. Also, energy monitor solutions were integrated. The acquired data is transmitted and analysed for knowledge extraction, identifying savings and other related KPIs. From data, automatic saving actions were performed towards heating and cooling systems, lighting and a set of if-then actions were developed for automatic cost-saving actions, based on infrared signals to heating/cooling systems using some procedure of external command devices. This approach avoids the usage of proprietary vendor solutions in a flexible approach that can easily be deployed to any building facility. This is an important achievement since most of the building consumption is based on heating and cooling systems. In a three years test of the solution, the total energy consumption savings surpassed 20%

Diversification is an important strategy for managing risk in agricultural systems. Risk analysis can help to support farmers’ diversification strategies, but existing analytical methods are complicated and little used. The minimum regret model helps to fill this gap. It provides a simple, transparent calculation procedure that can be executed with existing spreadsheet software. Regret is an important heuristic in the behavioural sciences and regret-based models are used in finance. The article presents the model with a numerical example. It also presents a framework to compare minimum regret portfolios with two limit cases (maximum utility and minimax regret). A case study illustrates the use of the model and the comparative framework.

This paper analyses six major transitions in watershed management in the Lower Mississippi River from the early 19th century till present. A conceptual framework is developed for analysing the role of visions, agency and niches in water management transitions and applied to a historical case on water management in the Lower Mississippi River. It is shown that water management regimes change over time and that major transitions were preceded by niches, in which new visions were developed and empowered. The case shows that: (i) emerging visions play an important role in guiding transitions; (ii) agency enables the further diffusion of visions and niches; (iii) vision champions play an important role in transitions, but are not decisive; (iv) each transition has led to an extension of the number of societal functions provided, which has led to more complex water management regimes in which functions are combined and integrated; and (v) external landscape factors are important, as they can lead to awareness and urgency in important decision making processes.

Knowledge management gains space within the school organization and can contribute satisfactorily to the quality of teaching. In everyday life the school manager intuitively uses knowledge management practices without exploiting the potentials they offer or allow. In this context, the purpose of this work is to identify the level of implementation of knowledge management practices aimed at structuring the organizational processes used by the public school manager. The methodology adopted was exploratory, with a qualitative and quantitative approach. For data collection, an already validated instrument with twenty-seven questions was used. Respondents to the questionnaires, one hundred and eleven managers of the basic education schools that make up the public school system in a city in the northwestern region of Paraná, Southern Brazil. In analyzing the results, it was only at this point that we investigated only those practices that were related to the structuring of organizational processes. This decision is justified because of the responsibilities of the school manager in the execution of his work. The results indicated that the school in its daily life, makes use of practices of Knowledge Management related to the structuring of the organizational processes and that many are already applied by the managers.

The management of existing water distribution system (WDS) is challenged by ageing of infrastructure, population growth, increasing of urbanization, climate change impacts and environmental pollution. Therefore, there is a need for integrated solutions that support decision makers to plan today, while taking into account the effect of these factors in the mid and long term. The paper is part of a more comprehensive project, where advanced hydraulic analysis for WDS is coupled with a dynamic resources input-output analysis model. The proposed modeling solution can be used to optimize the performance of a water supply system while considering also the energy consumption and consequently the environmental impacts. Therefore, as a support tool in the management of a water supply system also in the intervention planning. Here a possible application is presented for rehabilitation/replacement planning while maximizing the network mechanical reliability and minimizing risk of unsupplied demand and pressure deficit, under given economic constraints.

Wildfires have always been a part of the history of Mediterranean forests. However, forest regeneration after a wildfire is not certain. It depends on many factors, some of which may be influenced by land management activities. Failure of regeneration will cause a regime shift in the ecosystem, reducing the provision of ecosystem services and ultimately leading to desertification. How can we increase Mediterranean forests’ resilience to fire? To answer this question, we did a literature review, investigating chains of processes that allow forests to regenerate (which we label “regeneration mechanisms”), and assessed the impact of selected management practices documented in the WOCAT database on the regeneration mechanisms. We identified three distinct regeneration mechanisms that enable Mediterranean forests to recover, as well as the time frame before and after a fire in which they are at work, and factors that can hinder or support resilience. The three regeneration mechanisms enabling a forest to regenerate after a fire consist of regeneration (1) from a seed bank; (2) from resprouting individuals; and (3) from unburned plants that escaped the fire. Management practices were grouped into four categories: (1) fuel breaks, (2) fuel management, (3) afforestation, and (4) mulching. We assessed how and under what conditions land management modifies the ecosystem’s resilience. The results show that land management influences resilience by interacting with resilience mechanisms before and after the fire, and not just by modifying the fire regime. Our analysis demonstrates a need for adaptive – i.e. context- and time-specific – management strategies.

This qualitative study explores the relationship between supply chain responsiveness (SCR) and customer loyalty within the e-commerce sector. E-commerce has revolutionized global commerce, driven by technological advancements and shifting consumer behaviors. Central to e-commerce success is the ability to meet customer expectations swiftly and reliably, necessitating agile supply chain management (SCM) practices. SCR in e-commerce encompasses the capacity to adapt to dynamic market demands, minimize disruptions, and enhance customer satisfaction through efficient logistics, inventory management, and last-mile delivery. Through in-depth interviews with customers, e-commerce platform managers, and supply chain practitioners, this study investigates key themes, challenges, strategies, and impacts associated with SCR and customer loyalty. Findings reveal that customers prioritize fast order fulfillment, reliable service quality, personalized experiences, and trustworthy interactions, all of which significantly influence their loyalty and advocacy behaviors. Challenges identified include inventory management complexities, logistical hurdles in last-mile delivery, and the need for effective supplier communication. Strategic approaches to enhance SCR include leveraging data analytics for demand forecasting, adopting agile SCM practices, integrating customer feedback into service improvements, and fostering collaborative relationships with suppliers. These strategies not only optimize operational efficiency but also cultivate enduring customer relationships based on satisfaction, trust, and loyalty. The study concludes that improved SCR practices lead to increased customer satisfaction, repeat purchases, and positive word-of-mouth, thereby strengthening competitive advantage and sustainability in the e-commerce marketplace.

This study delves into the dynamics of relational energy (RE) within organizational context, examining some of its antecedents and decedents. Specifically, it investigates the influence of psychological capital (PsyCap) and humor on RE, and subsequently, the latter’s impact on job performance (JB) mediated by job engagement (JE). A research model based on structural equation modelling carried out with 481 employees in private service industries demonstrates several key relationships. It reveals that both PsyCap and affiliative humor positively affect RE, while aggressive humor exerts a negative influence. Furthermore, RE shows positive association with JE and JP, with JE serving as a mediator. To the authors’ knowledge, this is the first study to present an integrated model encompassing this exact combination of influencers and consequences of RE as well as to be investigated within Western Balkans cultural context. Therefore, it represents a novel approach. Additionally, the research addresses crucial questions regarding the existence and strategic significance of RE within organizational interactions. The findings offer valuable insights for organizations seeking to enhance employee engagement, performance, and wellbeing – even during health crises such as COVID-19 – by fostering RE. The study advances the understanding of RE in organizational settings and provides a foundation for future research in this domain.

Combined sewer overflow (CSO) is a significant environmental concern and public health (e.g., water contamination, eutrophication, and beach closure). The Environmental Protection Agency (EPA) has introduced the National Pollutant Discharge Elimination System (NPDES) permitting program to regulate and address this matter. This program mandates the control of CSOs for more than 700 municipalities obligated to devise Long-term Control Plans (LTCPs) to curb combined sewer overflows and bring them down to safe levels. LTCP involves diverse strategies, including sewer separation, green infrastructure improvements, and conventional gray infrastructure upgrades. This study investigates several municipalities’ solutions for CSO problems in conventional methods and wireless sensor technology as real-time control. The investigation mainly focuses on a comparative analysis of two cities, Richmond, Virginia, and South Bend, Indiana, such as average rainfall, the frequency of overflows, and the capacity of treatment plants. The findings indicate that integrating sensor technology could significantly enhance modeling endeavors, bolster the capacity of existing structures, and substantially enhance preparedness for storm events. The EPA’s Storm Water Management Modeling (SWMM) software is utilized. Through an analysis of SWMM data, the study suggests the potential for leveraging wireless sensor technology to achieve more robust control over CSOs as a part of LTCPs.

Patient safety is a top priority for all healthcare systems globally. Promoting the adoption of policies for reporting and learning from errors is an important strategy for improving care safety. Therefore, the aim of our study was to detect how much patient safety culture influences the reporting of adverse events and the use of the incident reporting tool. The study protocol was developed according to PRISMA guidelines. Articles were searched electronically in PubMed/MEDLINE, the COCHRANE library, and Google Scholar by two independent reviewers, and those that met the eligibility criteria were included. Synthesis of qualitative data from included studies was performed by graphical descriptive statistical analysis. The results of the systematic review showed that health care organizations' increasing focus on staff development of a safety culture has led to a significant increase in incident reporting rates over the years. Moreover, in situations where safety culture is placed at the top of the nations, there is a higher frequency of incident reporting. An efficient incident reporting system should be an essential foundation for healthcare organizations, as it allows them to collect experiences and data and provide feedback to healthcare providers and staff involved in care.

Integrated landscape approaches (ILA) aim to reconcile multiple, often competing, interests across agriculture, nature conservation, and other land uses. Recognized ILA design principles provide guidance for their implementation, yet application remains challenging, and a strong performance evidence-base is yet to be formed. A comprehensive literature review and focus group discussions with practitioners identified considerable diversity of ILA in actors, temporal, and spatial scales, inter alia. This diversity hampers learning from and steering these integrated planning approaches because of its intractable nature. Therefore, we developed a tool—an ‘ILA mixing board’—to structure the complexity of ILA into selectable and scalable attributes in a replicable way to allow planning, diagnostics, and comparative assessment of ILA. The ILA mixing board tool presents seven qualifiers, each representing a key attribute of ILA design and performance such as project flexibility, inclusiveness of the dialogue, and the centrality of the power distribution. Each qualifier has five (non-normative) outcome indicators that can be registered as present or absent. This process in turn guides planners, evaluators and other participating stakeholders involved in landscape management to diagnose the ILA type, and or its performance. We apply the ILA mixing board as a diagnostic tool to three ILA cases in Nicaragua, Madagascar, and the Congo Basin to show some of the many possible configurations of qualifiers on the mixing board. Overall, the tool allows comparative analyses of the complexity of ILA in a structured and manageable way.

Although energy management of a microgrid is generally performed using a day-ahead scheduling method, its effectiveness has been questioned by the research community due to the existence of high uncertainty in renewable power generation, power demand and electricity market. As a result, real-time energy management schemes are recently developed to minimise the operating cost of a microgrid while high uncertainty presents in the network. This paper develops modified particle swarm optimisation (MPSO) algorithms to solve optimisation problems of energy management schemes for a community microgrid and proposes a scheduling approach after taking into consideration high uncertainty to effectively minimise the operational cost of the microgrid. The optimisation problems are formulated for real-time and scheduling approaches, and solution methods are developed to solve the problems. It is observed that the scheduling program demonstrates superior performance in all the cases, including uncertainty in prediction, as compared to the other energy management approaches, although solutions have significant deviations due to prediction errors.

In this work, an algorithm for the scheduling of household appliances to reduce the energy cost and the peak-power consumption is proposed. The system architecture of a home energy management system (HEMS) is presented to operate the appliances. The dynamics of thermal and non-thermal appliances is represented into state-space model to formulate the scheduling task into a mixed-integer-linear-programming (MILP) optimization problem. Model predictive control (MPC) strategy is used to operate the appliances in real-time. The HEMS schedules the appliances in a dynamic manner without any a priori knowledge of the load-consumption pattern. At the same time, HEMS responds to the real-time electricity market and the external environmental conditions (solar radiation, ambient temperature etc). Simulation results exhibit the benefits of proposed HEMS by showing the reduction of up to 47% in electricity cost and up to 48% in peak power consumption.

Using the example of a generator model with dedicated inertia, a theoretical study of two coupled self-oscillators with capacitive coupling, their sequential single-frequency synchronization, chaos and two-frequency synchronization with an adiabatic change in the magnitude of the coupling between partial self-oscillators was carried out. The parameters of self-oscillators and the values of the coupling coefficient at which the specified operating modes of coupled self-oscillators exist are determined. The results of numerical studies, illustrating the conditions for excitation of single-frequency, chaotic and dual-frequency oscillations in a system of coupled self-oscillators are presented.

Self-administered pre-participation screening for physical activity (PA) requires an instrument that should be easily used and identify individuals at high risk. The Physical Activity Readiness Questionnaire (PAR-Q+) has been used for many years. Its ease of use and ability to identify those not fit to undergo PA has not been assessed. This study was to determine the rates of the PAR-Q+ in identifying adults who may not be fit for moderate or intense PA and obtain feedback on the use of this tool. A public on-line voluntary survey on the PAR-Q+ was carried out obtaining participants’ bio-characteristics, them completing the PAR-Q+ form and providing feedback. With 1019 participants, about 57.8% engaged in at least 150 minutes of PA weekly. This decreased with increasing number of co-morbidities. Increasing age was associated with more co-morbidities. About 33.1% of the participants using the PARQ+ would have required further medical evaluation. Only 3 of the 7 main PAR-Q+ questions were easily understood. Difficulties were encountered with 39 of the 44 follow-up questions, especially amongst those with co-morbidities. The large number of technical terms was also a source of concern. The PAR-Q+ would need extensive simplification before it may be recommended for use.

Understanding and addressing dehumanization in healthcare is crucial due to its profound impact on patient care, ethical implications on patient dignity and autonomy, and its potential to affect the psychological well-being of healthcare professionals. The primary aim of this study was to develop reliable and valid instruments measuring two different types of dehumanization, namely animalistic dehumanization (i.e., stripping one of their uniquely human characteristics) and mechanistic dehumanization (i.e., striping one of their human nature characteristics) among healthcare professionals. In a cross-sectional validation study among healthcare professionals, we developed and tested measures of both animalistic and mechanistic dehumanization, focusing on dehumanization of patients (hetero-dehumanization) and oneself (self-dehumanization), respectively. All measures were developed and validated based on a concept analysis, a literature review, and an appraisal of pre-existing scales. The research was conducted among 400 nurses and medical doctors employed in Greek public hospitals. Coefficient Validity Ratio results showed that 100% of items were acceptable for both measures. The newly developed hetero-dehumanization scale encompassed two-factors (factor 1: animalistic dehumanization, factor 2: mechanistic dehumanization, Cronbach’s alpha was equal to 0.86 for each measure). The self-dehumanization scale was a mono-factorial measure mechanistic dehumanization (Cronbach’s alpha = 0.97). Two validated measures of (self and hetero-) animalistic and mechanistic dehumanization measures were developed for the assessment of dehumanization among health professionals, which will form the basis for future research in this important scientific field.

Background: Self-harm (SH) refers to self-injury or intentional self-poisoning with varying degrees of suicidal intent and is a major public health issue for children and adolescents (C&A) worldwide. Given significant gaps exist in our understanding of the associated psychopathology in C&A, this paper outlines the protocol for a prospective clinical study examining risk factors of SH and additional candidate parameters (not routinely assessed) during an acute SH episode. Methods: The EXPAAND (EXploring Psychiatric and Attentional risk-factors in Adolescents Needing intervention for Deliberate self-harm) is a randomised control trial to assess additional novel candidate risk factors for SH in C&A and to evaluate the effectiveness of SH-targeted brief psychological intervention (Therapeutic Assessment (TA)), within a real-world acute clinical setting, as we include neurodiversity and gender diversity in this study. EXPAAND is conducted in 4 phases: (i) recruitment & randomisation; (ii) extended assessment; (iii) randomised intervention; and (iv) follow-up observational period to ascertain clinical outcomes for comparison. Expected Results: We envisage that by diagnosing and treating attentional disorders when detected will mitigate potential confounding effects of these conditions. We also expect that SH-focused TA will be effective in reducing subsequent SH and in improving engagement in follow-up and subsequent treatments.

The experience of ego dissolution and self-transcendence induced by psychedelic substances offers a profound challenge to our conventional understanding of the self and our relationship with the natural world. This paper delves into the philosophical underpinnings and implications of this phenomenon, exploring how the temporary breakdown of ego boundaries during a psychedelic experience may foster a sense of profound interconnectedness with nature. Drawing from Western and Eastern philosophical traditions, as well as recent insights from neuroscience and consciousness studies, we examine the potential of psychedelic-induced self-transcendence to catalyze a shift in our perspectives on the human-nature relationship. The paper investigates the philosophical implications of this experience, including its resonance with deep ecological philosophies and its potential to inspire more ecocentric ethical frameworks. Furthermore, we explore the possible practical implications of fostering a sense of ecological connectedness through psychedelics, such as promoting environmentally sustainable behaviors and addressing the pressing challenges of climate change and ecological degradation. Ultimately, this exploration highlights the value of engaging with altered states of consciousness as a means to reconsider our place within the intricate web of life on Earth.

Generalized zero-shot learning (GZSL) aims to simultaneously recognize both seen classes and unseen classes by training only on seen class samples and auxiliary semantic descriptions. Recent state-of-the-art methods infer unseen classes based on semantic information or synthesize unseen classes using generative models based on semantic information, all of which rely on the correct alignment of visual-semantic features. However, they often overlook the inconsistency between original visual features and semantic attributes. Additionally, due to the existence of cross-modal dataset biases, the visual features extracted and synthesized by the model may also mismatch with some semantic features, which could hinder the model from properly aligning visual-semantic features. To address this issue, this paper proposes a GZSL framework that enhances the consistency of visual-semantic features using self-distillation and disentanglement network (SDDN). The aim is to utilize self-distillation and disentanglement network to obtain semantically consistent refined visual features and non-redundant semantic features to enhance the consistency of visual-semantic features. Firstly, SDDN utilizes self-distillation technology to refine the extracted and synthesized visual features of the model. Subsequently, the visual-semantic features are then disentangled and aligned using a disentanglement network to enhance the consistency of the visual-semantic features. Finally, the consistent visual-semantic features are fused to jointly train a GZSL classifier. Extensive experiments demonstrate that the proposed method achieves more competitive results on four challenging benchmark datasets (AWA2, CUB, FLO, and SUN).

Recent research has specifically targeted the decision-making process of eco-friendly individuals, emphasizing the significance of recycling and its impact on sustainability. Our study extends this inquiry by examining the correlation between recycling participation and pro-environmental behavior among consumers, integrating the concepts of self-efficacy, feelings of pride, and social pressure into our analysis. Utilizing Partial Least Squares-Structural Equation Modeling (PLS-SEM), we aimed to explore the intricate relationships that underpin these behaviors. Results suggest that self-efficacy and feelings of pride significantly influence individuals' recycling behaviors, highlighting the role of psychological and social factors in promoting environmental sustainability. Interestingly, it was concluded that social pressure did not have the expected moderating effect on increasing consumers' feelings of pride and self-efficacy toward recycling activities.This study not only sheds light on the underlying mechanisms that drive pro-environmental actions but also contributes to understanding sustainability promotion through recycling and offers insights for policymakers and environmental advocates to foster environmental responsibility and behavior change.

In the light of almost a century of struggle to make (common) sense of Quantum Mechanics and to reconcile it with General Relativity, it is proposed to (for some time) forget about quantizing gravity or striving for one Theory of Everything or “Weltformel”, which would describe the whole of reality without any joints or suture marks. Instead of one single monolithic formalism, a three-legged compound approach is argued for. Quantum Mechanics, Relativity and Thermodynamics are proposed as the main pillars of reality, each with its well-defined realm, specific features, and clearly marked interfaces between the three of them. Not only classical reality, which is rather directly accessible to us, is then comprehensively modelled by their encompassing combination. Quantum phenomena are understood as undoubtedly lying at the bottom of classical physics and at the same time, they become “fully real” only when embedded in classical frames between preparation and measurement in time. It is then where thermodynamics steps in and provides the mediating glue. The aim of this short contribution is not to deliver novel quantitative results but rather to propose a comprehensive research program and to coarsely lay out a very roughly coherent self-referential sketch starting from the beginning of the one universe, which we inhabit.

Indigenous Peoples in Canada have shown great strength and resilience in maintaining their cultures and ways of life to date in the face of settler colonialism. Centering the water crises within Indigenous sovereignty and self-determination, we explore the impacts these crises are having on community members. Particularly, the continuous failure of the Canadian government to end the water crises in remote Indigenous communities, Star Blanket Cree Nation, is investigated in this paper. What implications have these water governance gaps had on Indigenous Peoples’ sovereignty and self-determination? We adopted an Indigenist theoretical framework to guide the study. Additionally, a community-based participatory research approach was adopted. To achieve our research goals of investigating the implications of the current water crises for Indigenous sovereignty and self-determination, specific methods of sharing circles were used to gather knowledge from community members, Elders, and knowledge keepers. The research findings strongly highlight the strength and resilience shown by remote Indigenous communities in the face of the current water crises and continuous government failure. Solving the current water crises will involve remote Indigenous communities taking charge of their own water governance through Indigenous-led water governance systems. Additionally, taking steps to rebuild trust through genuine reconciliation will be key. Therefore, listening to remote Indigenous communities and taking collaborative action is fundamental.

The demand for precise indoor localization services is steadily increasing. Among various methods, fingerprint-based indoor localization has become a popular choice due to its exceptional accuracy, cost-effectiveness, and ease of implementation. However, its performance degrades significantly as a result of multipath signal attenuation and environmental changes. In this paper, we propose an indoor localization method based on fingerprints using self-attention and long short-term memory (LSTM). By integrating a self-attention mechanism and LSTM network, the proposed method exhibits outstanding positioning accuracy and robustness in diverse experimental environments. The performance of the proposed method is evaluated under two different experimental scenarios, which involve 2D and 3D moving trajectories, respectively. The experimental results demonstrate that our approach achieves an average localization error of 1.76 m and 2.83 m in the respective scenarios, outperforming the existing state-of-the-art methods by 42.67% and 31.64%.

We introduce a novel method for fabricating perovskite solar modules using selective spin-coating on various Au/ITO patterned substrates. These patterns were engineered for twofold purposes: (1) to enhance selectivity of monolayers primarily self-assembling on the Au electrode, and (2) to enable seamless interconnection between cells through direct contact of the top electrode and the hydrophobic Au connection electrode. Utilizing SAMs-treated Au/ITO, we achieved sequential selective deposition of the electron transport layer (ETL) and the perovskite layer on the hydrophilic amino-terminated ITO, while the hole transport layer (HTL) was deposited on the hydrophobic CH3-terminated Au connection electrodes. Importantly, our approach had negligible impact on the series resistance of the solar cells, as evidenced by the measured specific contact resistivity of the multilayers. A significant outcome was the production of a 6-cell series-connected solar module with a notable average PCE of 8.32%, providing a viable alternative to the conventional laser scribing technique.

The aim of the study was to examine the influence of different irrigation protocols on the shear bond strength (SBS) of self-adhesive resin composite cement (SARC) to primed radicular dentin. Radicular dentin slabs (N=58) were sectioned from extracted intact third molars, embedded in acrylate, polished, and randomly assigned to five experimental groups (N=8-12) and one control group, CG (N=8). Irrigation solutions used were sodium hypochlorite (H), ethylene-diamine-tetra acetic acid (EDTA), etidronic acid with hypochlorite (HEDP), saline solution (SS), and chlorhexi-dine (CHX). Each experimental group underwent different irrigation protocol for two minutes: 1) H/EDTA/H, 2) HEDP, 3) H/EDTA/CHX, 4)H/EDTA/SS, and 5) HEDP/SS. The CG samples were not treated with any irrigation solution. After drying, adhesive enhancing primer (AEP) and du-al-curing SARC were applied to the radicular dentin using molds corresponding to the Ultra Tester. Specimens were stored at 37°C in distilled water and fractured in shear mode after 10 days. The results were analyzed using the ANOVA statistical test and Post-hoc Games-Howell test, α=0.05. CG exhibited the highest SBS. Except for HEDP and HEDP/SS, all experimental groups showed significantly lower SBS compared to the control group (p< 0.05). HEDP seems to be ad-equate solution for root canal cleaning before dentin priming and fiber post cementation with self-adhesive resin cement. Cleaning protocols with H, EDTA and CHX cause a significant de-crease in bond strength.

Microvascular self-healing composite materials have significant potential for application and their mechanical properties need in-depth investigation. In this paper, tensile and compressive properties of woven fabric carbon fiber reinforced polymers (CFRP) laminates containing three-dimensional microvascular channels were investigated experimentally. Several detailed finite element (FE) models were established to simulate the mechanical behavior of the laminate and the effectiveness of different models were examined. The damage propagation process of the microvascular laminates and the influence of microvascular parameters were studied by the validated models. The results show that microvascular channels arranged along the thickness direction (z-direction) of the laminates are critical locations under the loads. The channels have minimal effect on the stiffness of the laminates but causing a certain reduction in strength, which varies approximately linearly with the z-direction channel diameter within its common design range of 0.1~1mm. It is necessary to consider the resin-rich region formed around microvascular channels in the warp and weft fiber yarns of the woven fabric composite when establishing the FE model. And the layers in model should be assigned with equivalent unidirectional ply material in order to calculate the mechanical properties of laminates correctly.

This paper deals with a method of calculating the self and mutual inductances of various air coils located arbitrarily in space. Known elementary solutions (the Biot-Savart formulas) were used to determine the magnetic field of infinitely thin current loops and infinitely thin wires of finite length linking magnetically other coils. Unlike commonly used algorithms, these elementary solutions were not extensively transformed analytically but were used to perform calculations by direct numerical integration. This enabled very quick and accurate obtaining of the self-inductance values as well as determining the dependence of mutual inductances on the position of both coils. This method allows analysis of different coil configurations (misaligned coils, inclined to each other, etc.) that other methods do not cover. It also enables the determination of the forces acting on the coils, as well as the calculation of the magnetic field distribution from any coil configuration. The obtained results were compared with those presented by other authors.

In this paper, an ultracompact combined sensor for displacement and angle synchronous measurement is proposed based on self-imaging effect of optical microgratings. Using a two-grating structure, linear and angular displacement can be measured by detecting the change of phase and amplitude of the optical transmission respectively within one single structure in meantime. The optical transmitted properties of the two-grating structure are investigated in both theory and simulation. Simulated results indicate that, the optical transmission changes in a sinusoidal relationship to the input linear displacement. Meanwhile, the amplitude of the curve decreases with an input pitch angle, indicating the ability for synchronous measurement within one single compact structure. The synchronous measurement of the linear displacement and the angle is also demonstrated experimentally. The results show a resolution down to 4nm for linear displacement measurement, and a sensitivity of 0.26mV/arcsec within a range of ±1° for angle measurement. Benefitting from a simple common-path structure without using optical components including reflectors and polarizers, the sensor shows an ultrahigh compactness for multiple-degrees-of-freedom measuring, indicating the great potential for this sensor in the fields such as integrated mechanical positioning and semiconductor fabrication.

This study presents an in-depth analysis and evaluation of self-healing networks as an innovative solution to combat the escalating threat of ransomware attacks. Recognizing the limitations of traditional network security methods in the face of advanced cyber threats, the research focuses on the development and implementation of self-healing networks, characterized by their dynamic, intelligent response systems. Utilizing a combination of artificial intelligence and machine learning algorithms, these networks demonstrate remarkable adaptability and resilience. Through rigorous simulations, the study examines the efficacy of self-healing networks in detecting, isolating, and recovering from ransomware attacks, with an emphasis on their ability to learn and evolve from each incident. The research highlights the strengths and limitations of these networks and discusses their potential applications in various sectors. The findings suggest that self-healing networks, with their proactive and adaptive defense mechanisms, represent a significant advancement in cybersecurity strategies, offering a robust solution against a range of cyber threats. Future work is recommended to further enhance the capabilities of self-healing networks, particularly in the areas of speed, detection accuracy, and quantum-resistant security measures.

This study aimed to expand and inform the growing body of research on Postpartum Depression, from a netnographic standpoint, for the social media platform of Pinterest. More specifically, it aimed to assess the type of content present on Pinterest regarding Postpartum Depression shared by women in 2018 and 2021, as well as examine the subjective experience of women who have experienced this mood disorder. Data were collected following a search using the keywords “Postpartum Depression” on Pinterest on two separate timestamps (2018 and 2021); pins were limited to those in English or French. Master themes were identified among all pins and those identified as “self-disclosure” were subsequently further analyzed. Self-disclosure data were separately analysed using thematic analysis, specifically adopting a deductive thematic approach for the 2021 data set stemming from the coding scheme created from analysis of the 2018 data. Major themes were identified, and an analysis of frequency was performed for each sub-theme, along with qualitative examples associated with each theme. A total of 483 Pinterest pins from two different time points of 2018 (169 pins) and 2021 (314 sample pins) were analyzed. Five primary categories were identified in both 2018 and 2021, with five additional categories being identified in the 2021 dataset. Comparative results from 2018 and 2021 self-disclosure pins show individuals’ varying yet similar subjective manifestations of PPD, the potential need to adopt a multidisciplinary treatment approach, and the societal fears, such as mental health stigma, that are playing a part in help-seeking behavior hesitancies. Our findings provide imperative insight into individuals’ subjective experiences with PPD; experiences that involve a sensitive and vulnerable topic. Netnographic research, along with Pinterest, must be taken into consideration for future work delving into women’s health issues, including those surrounding perinatal mental health.

The aim of article is to design a calm water resistance predictor based on Machine Learning Tools and development of a systematic series for battery-driven catamaran hull forms. Regression Trees (RT), Support Vector Machines (SVM), and Artificial Neural Network (ANN) regression models are applied for dataset training on developed systematic series of catamarans. A hullform optimization was implemented for various catamarans including dimensional and hull coefficient parameters based on resistance and structural weight reduction and battery performance improvement. This paper provides a diverse database of catamaran hullform. Hence, an automated Matlab program was coded for geometry generation and cost function evaluation. Design distribution based on Lackenby transformation fulfills all design space and sequentially a novel self-blending method reconstructs new hullforms based on two parents blending. Finally, a machine learning approach was conducted on generated data of case study. This study shows that ANN algorithm correlates well with the measured resistance. Accordingly, a general and unique tool is proposed for optimized and desired design in first design stage.

Carbonization of a biopolymer (lignin) in self-propagating high-temperature synthesis (SHS) led to the production of 2D graphene structures. With the help of modern analytical methods (Raman spectroscopy, X-ray diffraction) and electron microscopy, the resulting product was confirmed to have a few-layer 2D graphene structure. The predicted photovoltaic properties of the resulting few-layer graphene were implemented for laser ignition of a model pyrotechnic composition based on porous silicon. A phenomenological model of the formation mechanism of 2D graphene structures under the conditions of the SHS process is proposed.

Although adults and children differ in self-versus-other perception, the developmental perspective on this discriminative ability is missing. We compared neural activation of self-vs-others in 39 participants of 4 different age groups (4 yo. to adulthood). Two brain regions, the MCC and right postcentral gyrus, exhibited respectively non-linear and gradual gains in discriminative abilities for self-vs-others stimuli. These regions play critical roles in self-referential processing, empathy, and social cognition. Nine brain regions showed linear increase for others-vs-self stimuli. These regions are associated with multisensory processing, somatosensory skills, complex visual stimuli, self-awareness, empathy, theory of mind, and social recognition. Understanding the neural basis of self-vs-others discrimination during development can inform when and how social contexts support learning processes during childhood and adolescence.

The research community has shown significant interest in the aqueous synthesis of nanomaterials due to its ability to eliminate the need for complex organic solvents. This synthesis approach aligns with the principles of green chemistry, attracting considerable attention. Aqueous solution technology in fabricating nanostructures has gained recognition for its potential to create ultrasensitive, low-energy, and ultrafast optoelectronic devices. This report focuses on synthesizing lead iodide (PbI2) nanoplates using a water-based solution technique and fabricating a planar photodetector. The photodetectors with a planar type of device structure (ITO/PbI2 NPs/Au) demonstrated a remarkable photosensitivity of 3.9×103 and a photoresponsivity of 0.51 mA/W at a wavelength of 405 nm. Notably, the asymmetrical output properties of ITO/PbI2 NPs/Au detector deliver additional evidence of the effective creation of a Schottky contact. Thus, the photodetector exhibited a photoresponse even at 0 V bias, leading to the realization of self-powered photodetectors. Additionally, the device exhibited a rapid photoresponse of 0.21/0.38 s (−5 V) in the visible range. This study has expanded the horizons for the aqueous-phase synthesis of nanoplate nanostructures, enabling the large-area fabrication of high-performance photodetectors.

As an emerging model, self-service fitness centers are reshaping the consumer fitness experience globally. Given the crucial role of customer loyalty in the sustainable operation and management of fitness service enterprises, this study constructs a structural model incorporating service quality, service convenience, customer satisfaction, word-of-mouth intentions, and repatronage intentions. The model is designed to elucidate the factors and mechanisms impacting customer loyalty at self-service fitness centers and further investigates how these relationships are affected by service methods, either with staff or without staff. The study employs PLS-SEM to empirically analyze 552 customer questionnaires from four self-service fitness centers in first-tier cities in China. The results reveal positive correlations among the constructs in the structural model, emphasizing the important position of raising service quality standards and reducing the time and effort expended by customers in the management of customer loyalty. Concurrently, service convenience was found to play a significant driving role in customers' perceived service quality. Through the chain-mediating effect of service quality and customer satisfaction, service convenience exerts a considerable positive impact on word-of-mouth intentions and repatronage intentions. Moreover, the study reveals significant differences in these relationships when considering service methods, either with staff or without staff.

Most natural language processing (NLP) tasks operate an input sentence as a sequence with token-level embeddings and features, despite its clausal structures. Taking Abstract Meaning Representation (AMR) parsing as an example, recent parsers are empowered by Transformers and pre-trained language models, but long-distance dependencies (LDDs) introduced by long sequences are still open problems. We argue that LDDs are not superficially blamed on the sequence length but are essentially related to the internal clause hierarchy. Typically, non-verb words in a clause cannot depend on words outside, and verbs from different but related clauses have much longer dependencies than those in the same clause. With this intuition, we introduce a type of clausal feature, hierarchical clause annotation (HCA), into AMR parsing and propose two HCA-based approaches, HCA-based self-attention (HCA-SA) and HCA-based curriculum learning (HCA-CL), to integrate HCA trees of complex sentences for addressing LDDs. We conduct extensive experiments on two in-distribution (ID) AMR datasets (AMR 2.0 and AMR 3.0) and three out-of-distribution (OOD) ones (TLP, New3, and Bio). Experimental results show that our HCA-based approaches achieve significant and explainable improvements against the baseline model and outperform the state-of-the-art (SOTA) model when encountering sentences with complex clausal structures that introduce most LDD cases.

Background: Depression is a common mental health problem that can affect everyone at different stages of development. Though the prevalence rate of depression among university students is rising, exploration among engineering students is limited. The aim of the study was to examine the prevalence of depression and its associated factors of among engineering students in Thailand. Methods: 346students participated in this study. All completed the outcome inventory-depression subscale (OI-D) to evaluate the level and prevalence of depression. Other variables assessed included social skill, learning styles, relationship satisfaction, interpersonal difficulty, alcohol use, internet addiction, and neuroticism. Correlation and regression analysis were applied to test the association between sociodemographic and psychosocial factors and depression. Results. Of 346 students with the mean age was 20.25 (SD, 1.33), 52.31% was male. Based on the OI-D, 35.3% of participants exhibited symptoms indicative of major depression. Multiple regression showed that only neuroticism, interpersonal difficulties, social skills, and self-esteem appeared to be the significant predictors of depression. Conclusion: the prevalence of depression among engineering students is unexpectedly high. Intra and interpersonal factors were found to be associated with depression. Further study on identifying these risk factors should be encouraged.

The 11 system in iron-based superconducting family has become one of the most extensively studied materials in the research of high-temperature superconductivity due to their simple structure and rich physical properties. However, the research on 11 iron-based superconductors faces numerous obstacles, mainly stemming from the challenges associated with producing high-quality single crystals. Since the discovery of FeSe superconductivity in 2008, researchers have made significant progress in crystal growth, overcoming the hurdles that initially impeded their studies. Consequently, they have successfully established the complete phase diagrams of 11 iron-based superconductors, including FeSe1-xTex, FeSe1-xSx and FeTe1-xSx. In this paper, we aim to provide a comprehensive summary of the preparation methods employed for 11 iron-based single crystals over the past decade. Specifically, we will focus on hydrothermal, chemical vapor transport (CVT), self-flux, and annealing methods. Additionally, we will discuss the quality, size, and superconductivity properties exhibited by single crystals obtained through different preparation methods. By exploring these aspects, we can gain a better understanding of the advantages and limitations associated with each technique.

Antibody-Drug Conjugates (ADCs) are a powerful therapeutic modality for cancer treatment. ADCs are multi-functional biologics in which a disease-targeting antibody is conjugated to an effector payload molecule through a linker. The success of currently used ADCs has been largely attributed to the development of linker systems which allow targeted release of cytocidal payload drugs inside cancer cells. Many lysosomal proteases are over-expressed in human cancers. They can effectively cleave a variety of peptide sequences, which can be exploited in the design of ADC linker systems. As a well-established linker, valine-citrulline-p-aminobenzyl carbamate (ValCitPABC) is used in many ADCs that are already approved or under preclinical and clinical development. Although ValCitPABC and related linkers are readily cleaved by cathepsins in the lysosome while remaining reasonably stable in human plasma, many studies have shown that they are susceptible to carboxylesterase 1C (Ces1C) in mouse and rat plasma, which hinders preclinical evaluation of the ADCs. Furthermore, neutropenia and thrombocytopenia, two of the most commonly observed dose-limiting adverse effects of ADCs, are believed to result from the premature hydrolysis of ValCitPABC by human neutrophil elastase. In addition to cathepsin-cleavable linkers, there is also growing interest in legumain-sensitive linkers for ADC development. Increasing plasma stability while maintaining lysosomal cleavability of ADC linkers is an objective of intensive current research. This review reports recent advances in the design and structure-activity relationship studies of various peptide/peptidomimetic linkers in this field.

Аннотация . Периодически развиваются самоподобные движения структурно-вещественных комплексов (СМК) из состава Солнечной системы в течение периода около 4,5 миллиардов лет земной коры, развития Земли в условиях самоорганизации. Синхронные или близкие во времени ряды генетических или парагенетических групп магматических, рудно-минеральных, метасоматических, осадочных образований, их структур и других сопутствующих им процессов, включают в себя каждый комплекс (ГМК). Каждый комплекс в его пределах ограничен во времени и пространстве, по причине признаков самопроизвольного динамического процесса; распространяется на территорию Земли в текущий исторический период; формирует состав и структуру земной коры на этом этапе, определяя ее полициклическое развитие. Количество циклов около 14,

Effortful control (EC) describes individual differences in self-regulation, with a strong attentional basis. Moreover, during early childhood EC has a central role on children’s socio-emotional adjustment and academic achievement. The aim of the current study was to predict the development of EC at 36 months of age from early attentional and environmental measures taken in infancy using a machine learning approach. A sample of 75 infants participated in a longitudinal study running different waves of data collection at 6, 9 and 36 months of age. Attentional tasks were administered at 6 months of age and two additional measures were collected at 9 months of age. Parents reported household environment variables during wave 1, and their child’s EC at 36 months. A machine -learning algorithm was implemented to identify children with low EC scores at 36 months of age. An “attention only” model showed greater predictive sensitivity than the “environmental only” model. However, a model including both attentional and environmental variables was able to classify the groups (Low-EC vs Average-to-High EC) with 100% accuracy. Sensitivity analyses indicate that socio-economic variables together with attention control processes at 6-months, and self-restraint capacity at 9-months, are the most important predictors of EC. Results suggest a foundational role of executive attention processes in the development of EC in complex interaction with household environment and provide a new tool to identify early markers of socio-emotional regulation development.

COVID-19 may not be a ‘youth disease’ but nevertheless impacts the life of young people dramatically, loneliness and negative mood being an unexpected additional pandemic. Many young people rely on social media for their feeling of connectedness with others. However, social media are suggested to have many negative effects on people’s anxiety. Instead of self-disclosing to others, design may develop alternatives to employ social robots for self-disclosure. In a follow-up on Duan et al. (2021), we report on a lab experiment of self-disclosing negative emotions to a social-media group as compared to writing a conventional diary journal or to talk to an AI-driven social robot after negative mood induction (i.e. viewing shocking earthquake footage). Participants benefitted the most from talking to a robot rather than from writing a journal page or sharing their feelings on social media. Self-disclosure on social media or writing a journal page did not differ significantly. In the design of interventions for mental well-being, human helpers thus far took center stage. Based on our results, we propose design alternatives for an empathic smart-home, featuring social robots and chatbots for alleviating stress and anxiety: a social-media interference chatbot, smart watch plus speaker, and a mirror for self-reflection.

We experimentally demonstrate enhanced spectral broadening of femtosecond optical pulses after propagation through silicon-on-insulator (SOI) nanowire waveguides integrated with two-dimensional (2D) graphene oxide (GO) films. Owing to the strong mode overlap between the SOI nanowires and the GO films with a high Kerr nonlinearity, the self-phase modulation (SPM) process in the hybrid waveguides is significantly enhanced, resulting in greatly improved spectral broadening of the femtosecond optical pulses. A solution-based, transfer-free coating method is used to integrate GO films onto the SOI nanowires with precise control of the film thickness. Detailed SPM measurements using femtosecond optical pulses are carried out, achieving a broadening factor of up to ~4.3 for a device with 0.4-mm-long, 2 layers of GO. By fitting the experimental results with theory, we obtain an improvement in the waveguide nonlinear parameter by a factor of ~3.5 and the effective nonlinear figure of merit (FOM) by a factor of ~3.8, relative to the uncoated waveguide. Finally, we discuss the influence of GO film length on the spectral broadening and compare the nonlinear optical performance of different integrated waveguides coated with GO films. These results confirm the improved nonlinear optical performance for silicon devices integrated with 2D GO films.

The rational fabrication of low-dimensional materials with a well-defined topology and functions is an incredibly important aspect of nanotechnology. In particular, the on-surface synthesis (OSS) methods based on the bottom-up approach enable facile construction of sophisticated molecular architectures unattainable by traditional methods of wet chemistry. Among such supramolecular constructs especially interesting are surface-supported metal-organic networks (SMONs), composed of low-coordinated metal atoms and π-aromatic bridging linkers differing in size, shape and functionalization scheme. In this work, the lattice Monte Carlo (MC) simulation technique was used to extract the chemical information encoded in a family of Y-shaped positional isomers coadsorbed with trivalent metal atoms on a flat metallic surface with (111) geometry. For this purpose the investigated tritopic molecules/metal atoms were carefully mapped on a triangular lattice as interconnected/isolated segments with appropriatelly embedded anisotropic interactions. Depending on the intramolecular distribution of active centers (functional groups) within the simulated molecular bricks, we observed the metal-directed self-assembly of two-dimensional (2D) openwork patterns, aperiodic mosaics and metal-organic ladders. The obtained theoretical findings could be especially relevant for the scanning tunneling microscopy (STM) experimentalists interested in a surface-assisted construction of complex nanomaterials stabilized by directional coordination bonds.

Light pen 3D vision coordinate measurement systems are increasingly widely used due to their advantages, such as small size, convenient carrying and wide applicability. The posture of the light pen is an important factor affecting accuracy. The pose domain of the pen needs to be given so that the measurement system has a suitable measurement range to obtain more qualified parameters. The advantage of the self-calibration method is that the entire self-calibration process can be completed at the measurement site without any auxiliary equipment. After the system camera calibration is completed, we take several pictures of the same measurement point with different poses to obtain the conversion matrix of the picture, and then use spherical fitting, the generalized inverse method of least squares, and the principle of position invariance within the pose domain range. The combined stylus tip center self-calibration method calculates the actual position of the light pen probe. The experimental results show that the absolute error is stable below 0.0737 mm and that the relative error is stable below 0.0025 mm. The experimental results verify the effectiveness of the method; the measurement accuracy of the system can meet the basic industrial measurement requirements.

Description of redox reactions is critically important for understanding and rational design of materials for electrochemical technologies including metal-ion batteries, catalytic surfaces, or redox-flow cells. Most of these technologies utilize redox-active transition metal compounds due to their rich chemistry and their beneficial physical and chemical properties for these types of applications. A century since its introduction, the concept of formal oxidation states (FOS) is still widely used for rationalization of the mechanisms of redox reactions, but there exists a well-documented discrepancy between FOS and the electron density-derived charge states of transition metal ions in their bulk and molecular compounds. We summarize our findings and those of others which suggest that density-driven descriptors are in certain cases better suited to characterize the mechanism of redox reactions, especially when anion redox is involved, which is the blind spot of the FOS ansatz.

Because of an often complicated and difficult-to-access care system, help-seeking for people with suspected dementia can be stressful. Difficulty in help-seeking may contribute to carer burden, in addition to other known stressors in dementia care. This study examined the relationship between perceived help-seeking difficulty and carer burden, and the barriers contributing to perceived difficulty. We interviewed 110 carers accessing a community-based dementia assessment service for suspected dementia of a family member for their perceived difficulty, delays, and barriers in help-seeking, and carers burden in terms of role strain, self-criticism, and negative emotions. Linear regression models showed that perceived help-seeking difficulty is associated with carer self-criticism, while carer role strain and negative emotions are associated with symptom severity of the person with dementia but not help-seeking difficulty. Inadequate knowledge about symptoms, service accessibility, and affordability together explained more than half of the variance in perceived help-seeking difficulty (Nagelkerke R2 = .56). Public awareness about symptoms, support in navigating service, and financial support may reduce perceived difficulty in help-seeking, which in turn may reduce carer self-criticism during the early course of illness.

Self-assembling peptide P11-4 is amphiphilic and pH-triggered with demonstrated effectivity repairing early carious lesions in enamel. However, P11-4 effects on dentin biomineralization and repair remain unexplored. Thus, cytocompatibility and effectiveness of P11-4 inducing mineralization and migration of odontoblast-like cells (MDPC-23) were investigated. MDPC-23 were seeded in contact with P11-4(0.5µg/ml and 1µg/ml), Dentin Matrix Protein 1 (DMP1 0.5µg/ml and 1 µg/ml) or Calcium hydroxide (Ca(OH)2 100µg/ml) solutions. Cytotoxicity was verified using MTT (n=6/group). Mineralization was tested using Alizarin Red (n=4/group). Cell migration was assessed by light microscopy (n=2/group). MTT and Alizarin Red data were compared using Krus-kal-Wallis and Mann-Whitney (α=0.05). P11-4 (0.5µg/ml and 1µg/ml) and DMP1 (0.5µg/ml and 1µg/ml) presented the highest cytocompatibility; Ca(OH)2 presented the lowest. DMP1 1µg/ml exhibited the highest mineralization ability, with no difference to P11-4 1µg/ml. Ca(OH)2 presented lower values than DMP1 1µg/ml (p<0.05), but similar to P11-4 1µg/ml. P11-4 and DMP1 at 0.5 µg/ml showed induced less mineralization than P11-4 and DMP1 at 1µg/ml (p<0.05), with no difference to Ca(OH)2. All materials stimulated cell migration, however, lower concentrations of DMP1 and P11-4 provided better results. P11-4 is cytocompatible, induces mineralization and MDPC-23 migration like DMP1. P11-4 could be an alternative for dentin mineralization and tooth repair.

Abstract: Increasing physical activity (PA) and personal and social values are two of the greatest demands in the current educational system. This study examined the effect of a hybrid pro-gramme based on the Personal and Social Responsibility Model and Gamification. A total of 58 students (13.89 years old, SD = 1.14) in two groups (Experimental and Control) participated dur-ing a complete academic year. Motivation, physical activity and sedentary behaviour were as-sessed though questionnaires. Physical fitness was evaluated using previously validated field tests. The results showed significant differences over time between EG and CG in afterschool physical activity (APA) at the weekend (p = 0.003), sedentary time (p = 0.04) and speed-agility (p = 0.04). There were no significant differences in motivation. Regarding the intervention, speed-agility (p = 0.000), strength (p = 0.000), agility (p = 0.000), cardiorespiratory fitness (p = 0.001), APA-weekend (p = 0.000), APA-week (p= 0.000) and sedentary time (p = 0.000) increased signifi-cantly in the EG. Speed-agility (p = 0.000), APA-weekend (p = 0.03) and sedentary time (p = 0.008) increased in the CG. The use of this hybrid program can be useful to produced improvements in physical fitness, physical activity and sedentary hevaviours. The use of a hybrid program based on teaching personal and social responsibility and gamification strategies, produced improvements in physical fitness, physical activity and sedentary behavior, but not in motivation variables. Further research is demanded in order to contrast this relevant findings due to the potential drawbacks and diversity found in the scientific literature among model-based practice.

Considering the significant advancements in autonomous vehicle technology, research in this field is of interest to researchers. To drive vehicles autonomously, controlling steer angle, gas hatch, and brakes need to be learned. The behavioral cloning method is used to imitate humans’ driving behavior. We created a dataset of driving in different routes and conditions and using the designed model, the output used for controlling the vehicle is obtained. In this paper, the Learning of Self-driving Vehicles Based on Real Driving Behavior Using Deep Neural Network Techniques (LSV-DNN) is proposed. We designed a convolutional network which uses the real driving data obtained through the vehicle’s camera and computer. The response of the driver is during driving is recorded in different situations and by converting the real driver’s driving video to images and transferring the data to an excel file, obstacle detection is carried out with the best accuracy and speed using the Yolo algorithm version 3. This way, the network learns the response of the driver to obstacles in different locations and the network is trained with the Yolo algorithm version 3 and the output of obstacle detection. Then, it outputs the steer angle and amount of brake, gas, and vehicle acceleration. The LSV-DNN is evaluated here via extensive simulations carried out in Python and TensorFlow environment. We evaluated the network error using the loss function. By comparing other methods which were conducted on the simulator’s data, we obtained good performance results for the designed network on the data from KITTI benchmark, the data collected using a private vehicle, and the data we collected.

Self-organized criticality (SOC) is a universal mechanism for self-sustained critical behavior in large-scale systems evolving outside equilibrium. Our report explores a tentative link between SOC and Lagrangian field theory, with the long-term goal of bridging the gap between complex dynamics and the non-perturbative behavior of quantum fields.

Tinnitus is a complex and heterogeneous psycho-physiological disorder responsible for causing a phantom ringing or buzzing sound albeit the absence of an external sound source. It has a direct influence on affecting the quality of life of its sufferers. Despite being around for a while, there hasn’t been a cure for tinnitus, and the usual course of action for its treatment involves use of tinnitus retaining and sound therapy, or Cognitive Behavioral Therapy (CBT). One positive aspect about these therapies is that they can be administered face-to-face as well as delivered via internet or smartphone. Smartphones are especially helpful as they are highly personalized devices, and offer a well-established ecosystem of apps, accessible via respective marketplaces of differing mobile platforms. Note that current therapeutic treatments such as CBT have shown to be effective in suppressing the tinnitus symptoms when administered face-to-face, their effectiveness when being delivered using smartphones is not known so far. A quick search on the prominent market places of popular mobile platforms (Android and iOS) yielded roughly 250 smartphone apps offering tinnitus-related therapies and tinnitus management. As this number is expected to steadily increase due to high interest in smartphone app development, a contemporary review of such apps is crucial. In this paper, we aim to review scientific studies validating the smartphone apps, particularly to test their effectiveness in tinnitus management and treatment. We use the PRISMA guidelines for systematic identification of studies on major scientific literature sources and delineate the outcomes of identified studies.

COVID-19 pandemic has affected the public educational sectors in terms of adjustment in educational modalities of instructional delivery, school operations, and policies. With this emerging paradigm shift, teachers' crisis self-efficacy and work commitment are relevant for research. This study's main objective was to determine the significant influence of crisis self-efficacy on the work commitment of public school teachers in Region XI (Davao Region), Philippines, during the COVID-19 pandemic. The sample consisted of 1,340 public school teachers across the Davao Region. The researchers collected the data through adapted questionnaires contextualized to the local setting and administered through online Google forms with appended consent. Mean, standard deviation, Pearson r, and regression analysis were used to analyze data. Results revealed that crisis self-efficacy significantly influences the work commitment of public school teachers during the COVID-19 pandemic. Uncertainty management during this crisis, in particular, best predicts teachers’ work commitment. Data also showed a high level of crisis self-efficacy in terms of action, preventive, achievement and uncertainty management, and high level of teachers’ work commitment in terms of commitment to school, commitment to students, commitment to teaching, and commitment to profession. Correlation results also showed a link between crisis self-efficacy and the work commitment of teachers amid pandemic. Finally, the study concluded with practical recommendations and directions for future research.

UAVNs (unmanned aerial vehicle networks) may become vulnerable to threats and attacks due to their characteristic features such as high mobility, highly dynamic network topology, and open-air wireless environments. Since previous work has focused on classical and metaheuristic-based approaches, none of these approaches have a self-adaptive approach. In this article, we examine the challenges of cyber detection methods to secure UAVNs and review exiting security schemes proposed in the current literature. Furthermore, we propose an agent-based self-protective method (ASP-UAVN) for UAVNs that is based on the Human Immune System (HIS). In ASP-UAS, the safest route from the source UAV to the destination UAV is chosen according to a self-protective system. In this method, a multi-agent system using an Artificial Immune System (AIS) is employed to detect the attacking UAV and choose the safest route. In the proposed ASP-UAVN, the route request packet (RREQ) is initially transmitted from the source UAV to the destination UAV to detect the existing routes. Then, once the route reply packet (RREP) is received, a self-protective method using agents and the knowledge base is employed to choose the safest route and detect the attacking UAVs. The method is evaluated here via extensive simulations carried out in the NS-3 environment. The experimental results of four scenarios demonstrated that the ASP-UAS increases the Packet Delivery Rate (PDR) by more than 17.4, 20.8, and 25.91%, and detection rate by more than 17.2, 23.1, and 29.3%, and decreases the Packet Loss Rate (PLR) by more than 14.4, 16.8, and 20.21%, the false-positive and false-negative rate by more than 16.5, 25.3, and 31.21% those of SUAS-HIS, SFA and BRUIDS methods, respectively.

Fish schooling implies an awareness of the swimmers for their companions. In flow mediated environments, in addition to visual cues, pressure and shear sensors on the fish body are critical for providing quantitative information that assists the quantification of proximity to other swimmers. Here we examine the distribution of sensors on the surface of an artificial swimmer so that it can optimally identify a leading group of swimmers. We employ Bayesian experimental design coupled with two-dimensional Navier Stokes equations for multiple self-propelled swimmers. The follower tracks the school using information from its own surface pressure and shear stress. We demonstrate that the optimal sensor distribution of the follower is qualitatively similar to the distribution of neuromasts on fish. Our results show that it is possible to identify accurately the center of mass and even the number of the leading swimmers using surface only information.

In this work, we have studied the propagation of ultrasonic waves of lysozyme solutions characterized by different degrees of aggregation and networking. The experimental investigation has been performed by means of the Transient Grating (TG) spectroscopy as a function of temperature; this technique enables to measure the ultrasonic acoustic proprieties over a wide time window, ranging from nanoseconds to milliseconds. The fitting of the measured TG signal allows the extraction of several dynamic properties, here we focused on the speed and the damping rate of sound. The temperature variation induces in the lysozyme solutions a series of processes: protein folding-unfolding, aggregation and sol-gel transition. Our TG investigation shows how these self-assembling phenomena modulate the sound propagation, affecting both the velocity and the damping rate of the ultrasonic waves. In particular, the damping of ultrasonic acoustic waves proves to be a dynamic property very sensitive to the protein conformational rearrangements and aggregation processes.

The Voronoi entropy is a mathematical tool for quantitative characterization of the orderliness of points distributed on a surface. The tool is useful to study various surface self-assembly processes. We provide the historical background, from Kepler and Descartes to our days, and discuss topological properties of the Voronoi tessellation, upon which the entropy concept is based, and its scaling properties, known as the Lewis and Aboav-Weaire laws. The Voronoi entropy has been successfully applied to recently discovered self-assembled structures, such as patterned micro-porous polymer surfaces obtained by the breath figure method and levitating ordered water micro-droplet clusters.

This study shows the application of self-organizing maps (SOMs) to probabilistic forecasts of wind power generation and ramps in Japan. SOMs are applied to atmospheric variables obtained from atmospheric reanalysis over the region, thus deriving classified weather patterns (WPs). Probabilistic relationships are established between the synoptic-scale atmospheric variables over East Japan and the generation of regionally integrated wind power in East Japan. Medium-range probabilistic wind power predictions are derived by SOM, as analog ensembles based on the WPs of the multi-center ensemble forecasts. As this analog approach handles stochastic uncertainties effectively, probabilistic wind power forecasts are rapidly generated from a very large number of forecast ensembles. The use of a multi-model ensemble provides better results than a one-forecast model. The hybrid ensemble forecasts further improve the probabilistic predictability skill of wind power generation, as compared with non-hybrid methods. It is expected that long-term wind forecasts will provide better guidance to transmission grid operators. The advantage of this method is that it can include an interpretative analysis of meteorological factors for variations in renewable energy.

(RADA)4 nanoscaffolds are excellent candidates for use as peptide delivery vehicles: they are relatively easy to synthesize with custom bio-functionality, and assemble in situ to allow a focal point of release. This enables (RADA)4 to be utilized in multiple release strategies by embedding a variety of bioactive molecules in an all-in-one ‘construct’. One novel strategy focuses on the local, on-demand release of peptides triggered via proteolysis of tethered peptide sequences. However, the spatial-temporal morphology of self-assembling nanoscaffolds may greatly influence the ability for enzymes to both diffuse into as well as actively cleave substrates. Fine structure and its impact on overall affect on peptide release is poorly understood. In addition, fractal networks observed in nanoscaffolds are linked to the fractal nature of diffusion in these systems. Therefore, matrix morphology and fractal dimension of virgin (RADA)4 and mixtures of (RADA)4 and matrix metalloproteinase 2 (MMP-2) cleavable substrate modified (RADA)4 were characterized over time. Sites of high (GPQG+IASQ, CP1) and low (GPQG+PAGQ, CP2) cleavage activity were chosen. Fine structure was visualized using established according to established methods. After 2 hrs of incubation, nanofiber networks showed an established fractal nature, however nanofibers continued to bundle in all cases as incubation times increased. It was observed that despite extensive nanofiber bundling after 24 hrs of incubation time, the CP1 and CP2 nanoscaffolds were susceptible to MMP-2 cleavage. The properties of these engineered nanoscaffolds characterized herein illustrate that they are an excellent candidate as an enzymatically initiated peptide delivery platform.

Social media and other web 2.0 tools have provided users the platform to interact and also disclose personal information not only with their friends and acquaintances, but also with relative strangers with unprecedented ease. This has enhanced the ability of people to share more about themselves, their families, and their friends through a variety of media including text, photo, and video, thus developing and sustaining social and business relationships. The purpose of the paper is to identify the factors that predict self-disclosure on social networking sites within the Ghanaian context. Data was collected from 452 students in three leading universities in Ghana and analyzed with Partial Least Square-Structural Equation Modeling. Results from the study revealed that all variables in the proposed model with the exception of interaction and perceived control were significant predictors of self-disclosure with privacy risk being the most significant predictor. In all, the model accounted for 54.6 percent of the variance in self disclosure. The implications and limitations of the current study are discussed and directions for future research proposed.

Within the field of guilt and shame, two competing perspectives have been advanced. The first, the social-adaptive perspective, proposes that guilt is an inherently adaptive emotion and shame is an inherently maladaptive emotion; thus, those interested in moral character development and psychopathology should work to increase an individual’s guilt-proneness and decrease an individual’s shame-proneness. The functionalist perspective, in contrast, argues that both guilt and shame can serve a person adaptively or maladaptively—depending on the situational appropriateness, duration, intensity, and so forth. This paper reviews the research conducted supporting both positions, critiques some issues with the most widely used guilt- and shame-proneness measure in the social-adaptive research (the TOSCA), and discusses the differences in results found when assessing guilt and shame at the state versus trait level. The conclusion drawn is that although there is broad support for the functionalist perspective across a wide variety of state and trait guilt/shame studies, the functionalist perspective does not yet have the wealth of data supporting it that has been generated by the social-adaptive perspective using the TOSCA. Thus, before a dominant perspective can be identified, researchers need to (1) do more research assessing how the social-adaptive perspective compares to the functionalist perspective at the state level, and (2) do more trait research within the functionalist perspective to compare functionalist guilt- and shame-proneness measures with the TOSCA.

This article presents a self balanced multistage DC-DC step-up converter for photovoltaic applications. Proposed converter topology is designed for unidirectional power transfer and provides a doable solution for photovoltaic applications where voltage is required to be stepped up without magnetic components (Transformer-less and Inductor-less). The output voltage obtained from renewable sources will be low and must be stepped up by using a DC-DC converter for photovoltaic applications. K diodes and K capacitors along with two semiconductor control switch are used in the K-stage proposed converter to obtain an output voltage which is (K+1) times the input voltage. The conspicuous features of proposed topology are i) Magnetic components free (Transformer-less and Inductor-less). ii) Continuous input current iii) Low voltage rating semiconductor devices and capacitors iv) Modularity v) Easy to add a higher number of levels to increase voltage gain vi) Only two control switches with alternating operation and simple control. The proposed converter is compared with recent existing transformer-less and Inductor-less power converter in term of voltage gain, number of devices and cost. The application of proposed circuit is discussed in detail. The proposed converter has been designed with rated power of 60W, input voltage is 24V, output voltage is 100V and switching frequency is 100 kHz. The performance of the converter is verified through experimental and simulation results.

Using insights from cybernetics and an information-based understanding of biological systems, a precise, scientifically inspired, definition of free-will is offered and the essential requirements for an agent to possess it in principle are set out. These are: a) there must be a self to self-determine; b) there must be a non-zero probability of more than one option being enacted; c) there must be an internal means of choosing among options (which is not merely random, since randomness is not a choice). For (a) to be fulfilled, the agent of self-determination must be organisationally closed (a `Kantian whole'). For (c) to be fulfilled: d) options must be generated from an internal model of the self which can calculate future states contingent on possible responses; e) choosing among these options requires their evaluation using an internally generated goal defined on an objective function representing the overall `master function' of the agent and f) for `deep free-will', at least two nested levels of choice and goal (d-e) must be enacted by the agent. The agent must also be able to enact its choice in physical reality. The only systems known to meet all these criteria are living organisms, not just humans, but a wide range of organisms. The main impediment to free-will in present-day artificial robots, is their lack of being a Kantian whole. Consciousness does not seem to be a requirement and the minimum complexity for a free-will system may be quite low and include relatively simple life-forms that are at least able to learn.

This qualitative research explores the profound implications of integrating real-time supply chain information on marketing decisions within service industries. Through semi-structured interviews with professionals from logistics, retail, hospitality, healthcare, and telecommunications sectors, the study examines how real-time data enhances demand forecasting, inventory management, personalized marketing approaches, agility in marketing responses, and supplier relationship management. Findings reveal that real-time supply chain information significantly improves accuracy in predicting customer demand and optimizing inventory levels, thereby reducing costs and enhancing service delivery efficiency. Moreover, real-time data enables more targeted marketing strategies through granular customer segmentation and dynamic pricing adjustments based on real-time market dynamics. The agility afforded by real-time information allows companies to swiftly adapt marketing strategies to emerging trends and consumer behaviors, maintaining competitiveness in dynamic service markets. Enhanced supplier collaboration and risk management further underscore the strategic value of real-time supply chain integration, fostering stronger partnerships and supply chain resilience. This study contributes to a deeper understanding of how real-time supply chain information transforms marketing practices in service industries, highlighting its role in improving operational efficiency, customer satisfaction, and overall competitiveness. Future research could explore implementation challenges and long-term impacts across diverse service sectors, providing insights into optimizing the strategic use of real-time data for sustained business success.

Manufacturing environments, characterized by rapid, unpredictable changes, uncertainties, risks, and uncontrollable fluctuations, pose significant challenges to minimizing disruptions in processes. This study introduces an innovative approach that prioritizes curbing risk propagation among processes to enhance robustness. It emphasizes the integration of engineering management principles and modular design within manufacturing. Adopting a system engineering perspective, all manufacturing process activities are viewed as interrelated components within a unified system. By employing Axiomatic Design (AD) theory and the Design Structure Matrix (DSM) method, manufacturing process architecture is modularized, yielding heightened robustness. The proposed mathematical model equips engineering and manufacturing managers with a potent tool for designing robust processes while adeptly managing system complexity. The study's outcomes underscore a substantial enhancement in modularization, leading to elevated overall robustness in manufacturing processes. To validate the methodology, the architectural design of manufacturing processes is examined in a real-case scenario, specifically the Barez Industrial Group in Iran. This verification substantiates the 'manufacturing processes' of the case, presenting an optimally modularized architecture. The results affirm the proposed approach's efficacy, demonstrating improved modularization that contributes to bolstered robustness in manufacturing processes.

Discussions and practices on sustainability are actively underway around the world. In this social context, this study conceptualized ESG management values ​​focused on sports organizations, especially professional sports clubs in Korea. Utilizing Q Methodology, suitable for research on individual's subjectivity, we explored ESG management values accepted by consumers of Korean professional sports. As a result, the ESG management values were confirmed as follows: ‘Type I: Trust-Management Emphasis,’ ‘Type II: Local-Community Emphasis,’ and ‘Type III: Safety-Respect Culture Emphasis.’ While each of the three types accepted governance, social responsibility, safety, and respect culture as their main values, they tended to deny environment-related values. Accordingly, this study provided two discussions: ‘Professional sports consumers’ low awareness of the environment’ and ‘Reinterpretation of environmental values ​​among the ESG management values ​​of professional sports clubs’. In conclusion, the three types are significant in that (1) they well reflect the social and cultural context of Korean professional sports and consumers' perceptions, and (2) they provide a new perspective on the ESG management value of professional sports teams.

Earthquake events present a high risk in urban areas. Nador City is a Mediterranean city located in a dynamic zone with seismologic movement and a frequency of earthquake events per year. This worrying rate shows that earthquake risks can hinder the urban area and damage citizens and goods if urban risk management is not taken. This study defines the areas most threatened by seismic events to protect them as a priority. Using Geographic Information System, Corine Land Cover, seismic intensity, and socioeconomic vulnerability index, we mapped the urban vulnerability index. The adopted model determines urban vulnerability levels from urban land cover, topography, geologic factors, and geomorphologic factors. These approaches reveal that $70\%$ of Nador is under the damage of a seismic disaster. In addition, the main objective is to apply a new set of guidelines to map the intensity of risks and explain the distinct risk exposure level in Nador’s urban context.

Since the turn of the 21^st Century Chian has enacted a range of policies to improve its water ecosystem. Some of these measures include (but are not limited to) the creation of Seven River Conservancy Commissions to engage in river basin management and the development (combination and recombination) of series of ministries and departments to address environmental pollution and degradation. The most recent attempt to address the nations polluted waterways and lakes occurred in December 2016, when the General Office of the Chinese Central Committee and the State Council issued The Options on Full Implementation of the River Chief System (RCS) Across the Country. The intent behind Options was not only to fully implemented he river chief system but to bring the nations drinking water supply quality to no worse than category III. Based on the Options Erik Solheim, UN Under Secretary General and Executive Director of the UN Environment Programme, commented ‘I'm convinced that what I have seen in Pujiang County and Anji County will be the future of China, even the future of the world’ (cited in Xianqiang 2021, 435; emphasis added). It is to this observation that the reminder of this article will be directed.

Larus michahellis increased its population throughout the 20th century in its worldwide distribution area. The increase in the Salinas de San Pedro del Pinatar has produced changes in the habitats due to the contribution of guano, predation on birds, incidents with workers, and the production of salt. The objective is to analyze the impacts of L. michahellis on the landscape, habitats, waterfowl, salt production, and workers, as well as to evaluate the effectiveness of control activities. Censuses of wintering L. michahellis have been carried out between 1990-2021, of nesting aquatic birds between 1994-2021, and nests and eggs of L. michahellis have been eliminated between 2000-2021. The result has been a decrease in pairs of L. michahellis, recovery of waterfowl populations, colonization of others, absence of incidents with workers, and reduction of damage to salt production. However, to reach a definitive solution, measures should be adopted to prevent L. michahellis from accessing the main sources of human food: urban solid waste dumps, aquaculture farms, and fish discards.

The movement of liquid droplets on the energy gradient surface has attracted extensive attention. Inspired by biological features in nature, such as the periodic spindle-shaped nodes in spider silks and conical-like barbs of cacti, the structure-property-function relationship of multifunctional gradient surfaces. In this study, a series of specific patterns are fabricated by 3D printing technology, followed by modification via the atmospheric pressure plasma treatment and liquid phase chemical deposition, resulting in enhancing the ability of water droplets of 5μL to travel 18.47mm on a horizontal plane and 22.75mm against gravity up to 20° tilting angle. Additionally, analysis techniques have been employed including contact angle analyzer, ESCA and laser confocal microscope to evaluate the sample performance. This work could further be applied to many applications related to microfluidic devices, drug delivery and water/fog collection.

Water quality assessment stands as a fundamental step in water resource management. In addition to substances and organisms present in the water, land use and land cover are two factors affecting also water quality. This study analyzed the correlation and influence between water quality and land use and land cover in the Miranda River Basin (MRB) and the natural wetlands in the Pantanal Biome. Using a watershed-wide approach, results suggested that water quality management policies can be considered in terms of sub-basins (smaller planning units). The Water Quality Index (WQI) was considered GOOD or EXCELLENT throughout the MRB. It was observed that the natural wetlands have the capacity to contribute to improve WQI, with reductions in thermotolerant coliforms and turbidity; however, high values were found for thermotolerant coliforms, a temporal increasing trend of biochemical oxygen demand (BOD), and a reduction in dissolved oxygen and total phosphorus. Conversely, it was found in these flooded areas a trend of decrease in dissolved oxygen and an increase in BOD concentrations. Natural wetlands play important hydrological and ecological roles in water quality, storing, removing, and cycling nutrients. They are highly relevant areas for defining watershed management and conservation strategies, environmental protection, and providing ecosystem services.

With the Sendai Framework (2015-2030) and the Paris Agreement (2015), the UN has been promoting at a global level, the priority objectives to protect the life and well-being of people, these documents of global consensus have scheduled in several countries, an extensive list of actions of responsibilities and commitments to the environment, to address natural disasters among those of greatest impact earthquakes and floods and among earthquakes (seismic activity). The materialization of the disaster is a natural or human-induced event, it manifests itself in permanent changes in society and by its origin it is classified as natural, anthropogenic (anthropogenic) and mixed, creating a worldwide problematic situation of immediate reaction. The attention and alert in the scientific community have been adding efforts, but in a disorganized way, with limited human and material resources and with globalized strategies still to be improved. The literature review of disaster risk management due to seismic activity, from 2008 to 2023, allows us to have updated information to identify the factors and deepen them, with the understanding, comprehension, and multidisciplinary knowledge. The selected researches that mention the factors (elements) that influence risk management of natural disasters due to seismic activity (RMNDDSA) allow us to know the advances and spaces to approach them, which constitutes the motivation to study the twenty-four (24) factors present in this type of disasters. The selected research articles indicate important advances that associate disaster risk management (DRM) and communication technology (ICTs). The technological means mentioned are well received and accepted by society, capable of detecting and communicating in real time seismic activity worldwide, with the help of social mobile networks, technological platforms, Twitter, Facebook, and others.

: This study examines the prospects of residential water demand management policy regulations in Ethiopia and their implications for sustainable water resource management. This study aims to evaluate the existing policy regulations and analyze their effectiveness in promoting efficient water use and conservation practices in residential areas. By considering the potential challenges and opportunities associated with these regulations, the research provides insights into the future of residential water demand management in Ethiopia and suggests strategies for enhancing sustainable water resource management. Integrated literature and policy document review, alongside observation and interviews, was used to assess the viability of residential water demand management policies. The assessment of current policy regulations for residential water demand management in Ethiopian urban towns has revealed significant shortcomings in promoting water conservation activities. Hence, there is a need for significant improvements in the current water resource policy guidelines, which lack specificity, particularly in residential water demand management conservation strategies. The lack of awareness among residents regarding the importance of conserving their limited water resources is evident. To address these challenges and ensure the sustainability of the water supply, the government and policy developers must engage with various stakeholders, including the community, in the process of revising current policy documents. A more precise and tailored approach is necessary for its effective implementation.

Background: Hurricanes and other wind events are significant disturbances that affect coastal urban forests around the world. Past research has led to the creation of wind resistance ratings for different tree species which can be used in urban forest management efforts to mitigate the effects of these storms. While useful, these ratings have been limited to species common to one global region (Florida, USA).Methods: Drawing on past ratings and data from a global literature review on tropical storm research, we created a machine learning model to broaden both the geographic coverage and the variety of species currently assessed for their resistance to wind.Results: We were able to assign wind resistance ratings to 281 new species based on the available data and our modelling efforts. The model accuracy and agreement with the original ratings when applied to the testing data set was high with 91% accuracy.Conclusions: The resulting list of wind resistance ratings has been adapted into a spreadsheet-based decision aid for managers, allowing them to assess the overall susceptibility of their urban forest to wind events like hurricanes.

Abstract Objective: This study aims to examine CA-125 and miRNAs as biomarkers in endometriosis pathophysiology and their potential roles in clinical diagnostics and prognostics. Methods:We reviewed a variety of studies, including cross-sectional, case-control, and prospective designs, examining a broad spectrum of patient demographics, clinical features, and biomarker (CA-125 and miRNA) expression levels. Results: CA-125 has been reaffirmed as a valuable biomarker in diagnosing and monitoring endometriosis, with its utility enhanced when used alongside other markers. MiRNAs have emerged as promising molecular regulators, offering new avenues for non-invasive diagnostics and a deeper understanding of the disease's pathophysiology. The integration of these biomarkers presents a potential shift towards more personalized and effective diagnostic and therapeutic strategies. Conclusion: Endometriosis presents a significant challenge in women's health, requiring innovative approaches for its management. The convergence of CA-125 and miRNA research represents a promising advance, potentially leading to more accurate diagnostics and personalized treatment. Future research should focus on standardizing methodologies, expanding study cohorts, and integrating findings into clinical practice to fully harness the potential of these biomarkers.

The paper's objectives are to identify the main benefits, limitations, and challenges facing using Blockchain technology in the Supply Chain Management (SCM). To explore the factors that affect the adoption and application of Blockchain technology in SCM. The study uses a systematic literature review methodology to analyze and compare selected related articles published between 2016 and 2022 on the usage of Blockchain technology in the SCM. Several studies showed that there are many benefits to using Blockchain technology in SCM such as enhanced security, confidentiality, traceability, transparency, data accuracy, privacy, efficiency, accountability, and trust. At the same time, there are many limitations and challenges like scalability, interoperability, legal (regulatory) issues, high implementation and maintenance costs, standardization and information, lack of trust in technology, high energy consumption, limited awareness, integration with current systems, and privacy. Blockchain technology has the potential to revolutionize various industries, but there are still several issues that need to be addressed to fully realize its potential. Understanding the benefits and difficulties of applying Blockchain technology in different industries, including the SCM, is essential in determining its effectiveness and the different strategies needed to assess its application and implementation.

This article seeks to provide an improved and more comprehensive understanding of the concept and theories on wasteland. It achieves this by focusing on the Indian context allowing us to unpack the importance of including multiple perspectives of wasteland narratives; this means including more positive narratives of the potential of wasteland to inform and improve prospects for land policies in the global south. Wasteland is commonly recognized as an underutilized category of land that may transform into a valuable resource base with proper management measures. The term waste has multiple angles that carry different notions ranging from fallow to agroforestry land in the global south and Brownfield to green space in the global north. We conduct a narra-tive review approach to qualitatively analyze the concept wastelands studied in pre-existing lit-erature from 1970 to present. The unsystematic literature review approach incorporates multiple elements of wasteland discourse, like understanding the meaning of the term on a global scale, setting out the meaning of the term waste into multiple perspectives explicitly in the Indian con-text, along with different classes and management approaches of wasteland from a national per-spective. The multiple perspectives of wasteland not only generate misconception on land resource but spawn difficulties in land use policy particularly for Indian scenario. For sustainable land use policy, reclaiming wasteland would be the best possible way for India and other countries in Global South, which requires a comprehensive methodological overview on wasteland narrative.

The cassava whitefly, Bemisia tabaci, causes direct damage to cassava in the tropics by feeding on the phloem of leaves, inducing leaf chlorosis and abscission which can result in considerable yield loss of up to about 50% on susceptible varieties. The pest is also known to impart its indirect damage through sooty mold formation. Most of the improved cassava varieties in Uganda were developed for CMD resistance and CBSD tolerance and little is known about their reaction to whitefly infestation. A study was conducted to evaluate the reaction of 24 improved cassava varieties which were sourced from 5 different countries in the region (Uganda, Kenya, Tanzania, Malawi, and Mozambique) to whitefly infestation. These varieties were evaluated in three agro-ecological zones of Uganda, namely; North-Western Savannah Grassland, Lake Victoria Crescent and the Kyoga Plains in the second rains of 2016. Monthly data were taken on adult and nymph counts, whitefly and sooty mold damage, CMD and CBSD severities from 2 up-to 9 Months after planting (MAP). Results show that the whitefly population was highly significantly (P

Borderline Personality Disorder (BPD) is a complex and severe mental disorder. It is associated with greater use of medical services. It is characterized by intense fear of abandonment, recurring suicidal thoughts or self-harm, paranoid ideation or dissociation, identity difficulties, chronic feelings of emptiness, impulsive behavior and unstable moods and relationships. BPD is one of the most prevalent personality disorders with a higher diagnosis in females. For a diagnosis of BPD in patients, they must have a chronic pattern of functional impairment in addition to five of nine listed DSM-5 criteria. This review was a narrative literature search between 2000 to 2023 with a focus on BPD comorbidities. Results: Researchers observed a complex pattern of comorbidities with BPD that connects with other externalizing and internalizing disorders. BPD has a high comorbidity rate with mood disorders including bipolar I and II disorders, major depressive disorder, anxiety disorders, panic disorder alcohol use disorder, nicotine dependence, marijuana dependance, posttraumatic stress disorder, other personality disorders, binge eating disorder and ADHD. Diagnosis and management of BPD in presence of some of these disorders are discussed.

Objectives: To analyse and detail surgical process improvement activities that achieve the highest economic impact. Methods: Over 4 years, a team of technicians and healthcare professionals implemented a set of Lean surgical process improvement projects at Vall d’Hebron University Hospital (VHUH), Barcelona, Spain. These projects now form part of the daily routine in the surgical process. The economic impact on the hospital's surgical activity budget was analysed. Results: Process improvements have led to annual operational savings of over € 8.5 million. These improvements include better patient flow, better management of information between healthcare professionals, and improved logistic circuits. Conclusions: The current cultural shift towards process management in large hospitals implies shifting towards results-based healthcare, patient-perceived value (VBHC) and value-added payment. A Lean project implementation process requires long-term stability. The reason a considerable number of projects fail to complete process improvement projects is the difficulty involved in establishing the project and improving management routines. Few studies in the literature have investigated the economic impact of implementing Lean management a posteriori, and even fewer have examined actual cases. In this real case study, changes to surgical block management were initiated from zero. After being carefully thought through and designed, changes were carried out and subsequently analysed.

The guthi, an ancient institution deeply embedded in Nepal's social, cultural, and economic fabric, has long overseen the maintenance of temples, shrines, festivals, and heritage sites since the Lichchhavi era (400-750). Since 1960, however, this system has been challenged by government land reforms, which has impacted its influence on sustainable heritage conservation. Nevertheless, there's compelling evidence that land nationalization and the guthi's declining authority have harmed local heritage conservation. Nevertheless, the guthi system has endured, serving as an important informal means of heritage conservation and highlighting the adaptability of traditional institutions. These community-based trusts, originally established for social and religious purposes, have played a pivotal role in preserving cultural practices, monuments, and temples for future generations. This article aims to demonstrate the central role of the guthi as the cornerstone of Nepal's efforts to conserve and manage both tangible and intangible cultural treasures. Using observational techniques, case studies, and a qualitative approach, it explores the historical evolution of heritage conservation through the lens of the guthi, taking into account subjective, valued, and constructed realities. The paper concludes by urging policymakers to recognize the significant contribution of indigenous systems such as the guthi in achieving sustainable heritage conservation. Embracing such traditional strategies can mitigate multifaceted problems and effectively preserve Nepal's cultural heritage through the guthi.

This paper presents how social media platforms and their components could be integrated into the KMS for the purpose of managing and sustaining Somali Indigenous knowledge (IK). The discovery of knowledge and its utilization is now fuelled by the advancement of technology, which connects users to external sources through using different platforms. The rapidly increasing use of SM and mobile technologies create opportunities to form knowledge networks that can facilitate the process of creating, preserving, and sharing knowledge and skills that are unique to communities in the Somali context. Somali society being an oral society with rich IK and other cultural practices lacked a framework in place to organize the existing knowledge in various methods. The paper refers to existing methodology E-learning and KM functions. This method first identifies functional similarities between SM, E-Learning, and KM systems and their interactions if they are properly integrated. The proposed framework consists of two functional parts; KM and SM. The KM part involves knowledge capturing, validation, formatting, storing, and distribution. SM part of the framework involves knowledge presentation, sharing, and application. Since the Somalis are said to be an oral society, this framework helps to capture and disseminate IK residing in knowledge holders.

The objectives of this article are to examine whether the application of digitalization in enterprise budgeting affects the fulfilment of budgeting functions and their qualitative characteristics, and to investigate whether the realization of budgeting functions brings benefits. The research was conducted from the perspective of contingency theory, both internal and external conditions. The study used an online survey targeting company budgeting staff. Structural Equation Modelling was utilized to validate the structural model (PLS-SEM technique). The conclusions confirm that the application of digitalization, which particularly pertains to ERP, Business Intelligence systems and accounting systems with budgeting solutions, positively impacts the fulfilment of budgeting functions and most of their qualitative characteristics, while Blockchain makes a minor contribution. Our research suggests that contingency variables, particularly internal ones such as company size, the quality of the organizational structure, and support for competitive strategy, continue to affect budgeting implementation even with the participation of digitalization in budgeting. Budgeting functions and their qualitative aspects are notably correlated with the advantages derived from budgeting, including financial performance, sustainable development and budget task execution.

Keywords: Forest management; sustainability; FSC; PEFC; research; market share

This narrative review aims to summarize evidence regarding the current utilization and future applications of neuromodulation in patients with headaches, with special attention paid to migraine and chronic cluster headache. We performed a narrative review of the literature to identify studies that detail the effectiveness of neuromodulation therapies in the treatment of headache syndromes. The literature was refined to predominantly focus on systematic reviews published in the last year that have the most robust reporting of research done on this topic. Patients with headache face several challenges, including medication overuse, cost burden, non-compliance to medications due to inability to tolerate side effects, or treatments that are ineffective. Neuromodulation is an emerging field that encompasses implantable and non-implantable technologies that intervene on the signaling and perception of pain. In recent years, this technology has been used as an analgesic, and has been shown to be effective for treatment-resistant headache, particularly when used in patients with migraine and chronic cluster headache.

The Internet of Things (IoT) is experiencing exponential growth, revolutionizing various industries with its ability to connect devices and enable advanced applications. In the realm of energy production, IoT offers significant potential for optimizing processes and improving efficiency. This study presents a comprehensive monitoring and energy management strategy for the University of Cuenca's microgrid photovoltaic (PV) system, utilizing IoT and ThingSpeak as key technologies. The proposed strategy leverages intelligent environments and utilizes ThingSpeak as a robust platform for data presentation and analysis. By integrating IoT devices and sensors, real-time monitoring of PV system parameters such as solar radiation and temperature is achieved. The collected data is then analyzed using advanced algorithms and visualized through ThingSpeak, enabling effective energy management and decision-making. The developed monitoring system was rigorously tested in a laboratory microgrid setting, where the PV system is interconnected with other generation and storage systems, as well as the electrical grid. Through the seamless integration of these components, the monitoring system provides enhanced visibility and control over the microgrid's energy production. The results demonstrate the successful implementation of the monitoring system, showcasing its ability to improve the supervision, automation, and analysis of daily energy production. By leveraging IoT technologies and ThingSpeak, stakeholders can access real-time data, analyze performance trends, and optimize energy resources.

This paper proposes a model that combines multi-criteria and multi-faceted risk assessment. Using two data sources, a fuzzy Technique for Order of Preference by Similarity to Ideal Solution FTOPSIS method combined with FMEA assessment. The FMEA method presented in this paper combines the technique of prioritising preferences according to FTOPSIS similarity to the ideal solution and conviction structure to overcome the defects of traditional FMEA indicators. The paper describes the exact process and tool selection, and the results obtained in the study verified accurate data. Finally, a numerical case study was presented on hospital reorganization services and case adaptation to prioritize surgical abandonment in Poland. The problem considered in the publication is the priority of patients’ operations in hospitals. The selection of relevant criteria, their importance and patient preferences are presented. The results obtained from the method provide a viable action plan for the proposed research problem. The proposed method is multi-faceted and can be part of an information system supporting reorganization, restructuring, and modification of the operational process.

The fall armyworm, Spodoptera frugiperda, arrived during the 2016/2017 cropping season in Limpopo, South Africa and it continues to cause devastating damage on maize in this region. The present study investigated knowledge, perception and management of S. frugiperda by smallholder farmers at Dzindi and Tshiombo irrigation schemes in this region. The study was conducted in 16 focus group discussion interviews, 12 at Dzindi and four at Tshiombo irrigation scheme. Although farmers failed to identify S. frugiperda eggs and pupal stages, they positively identified the pest by its larval stage and refer to it by several local names. All farmers relied extensively on insecticides for S. frugiperda control. With the exception of the Dzindi irrigation scheme farmers, who have adopted Bt maize, very few farmers have adopted alternative methods to chemical control such as mechanical control, physical control (crushing egg and handpicking of larvae), biological control, cultural practices (such as Push-Pull Technology), possible indigenous knowledge, or the use of monitoring tools, for the management of S. frugiperda. The study provided valuable information for designing sustainable management practices to control S. frugiperda on maize in smallholder farming communities.