The economics and safety of reactors can be affected by the diffusion of fission products into graphite. Xenon (Xe) fission products diffusing into the graphite is the most critical neutron absorber and poison that can slow down or stop the chain reaction. The transport parameters for inhibiting the xenon diffusion in graphite are therefore the utmost scientific problem. Self-sintered nanopore-isotropic (~ 40nm) graphite (SSNG) derived from green pitch coke can decrease Xe diffusion into the graphite. In this study, a method for measurement of diffusion coefficients of fission products diffusion in graphite by Rutherford backscattering spectrometry (RBS) was reported. The SSNG substrates were implanted with Xe at a dose of 4.8×1015 ions/cm2 and energy of 7 MeV. The RT-implanted samples were annealed in a vacuum at 650°C for 9 h. The implanted and annealed samples were characterized by RBS. The diffusion coefficient D(Xe,650°C) is 6.49×10-20 m2/s. The results indicate the excellent ability to inhibit Xe diffusion of the SSNG and present significance in designing and evaluating the safety of nuclear reactors.

Taxes on the consumption of certain products have played a key role in public revenue analysis in European countries. This work aims to assess the differences in tax planning on new non-combustion products across some European territories. Through theoretical analysis, the paper has three distinct aspects. Firstly, we show the taxpayer profile in different countries. Secondly, the study analyzes the risks for the health system and the individual. Thirdly, the design of the land tax is based on previous experience and planning in Europe. This paper concludes with a case study for different countries: 1) Spain “vapers” and “smokers”, where the analysis is based on micro-data from the European Health Interview Survey 2020. 2) Sweden with the analysis of snus, shows it as a practice to reach economic savings while decreasing economic costs thanks to the nudging of consumers towards better products. The results show taxation and, specially, land taxation, should consider differences in planning in the case of new products, such as the non-combustion products, given the user per capita income and the potential lower health risks involved.

Compared with the traditional bundle pricing strategy with fixed products, this paper proposes a more flexible interactive bundle pricing strategy (IBPS) for agricultural e-retailers. Since more and more consumers tend to buy more environmentally friendly and healthy organic agricultural products, we consider consumers' organic preferences and build a mixed bundle pricing model for organic and inorganic agricultural products. A free shipping strategy is introduced to maximize retailer profit and optimize consumer surplus. Through numerical analysis, we find: (1) Compared with the traditional online retailing method, IBPS can effectively stimulate consumption and higher retailer profit; (2) As the free shipping threshold increases, the total profit shows a trend of first increasing and then decreasing, indicating that a suitable free shipping threshold can optimize the retailer profit; (3) As the consumer green preference increases, the total sales of agricultural products decrease, but the organic sales improve, while total profit rises; (4) The higher the level of consumption, the higher the sales volume of organic products and there is an upward trend in the profits of e-retailers.

“Minas Frescal” cheese is a high moisture product, subject to the proliferation of several microorganisms. Essential oils are natural antimicrobial alternatives that can increase the quality of dairy products. This study aimed to analyze the antimicrobial action of oregano (Origanum vulgare) and rosemary (Rosmarinus officinalis) essential oils against Escherichia coli and Staphylococcus aureus. An antimicrobial test by diffusion and microdilution was performed to calculate the MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration). The behavior of E. coli in “Minas Frescal” cheese added with oregano oil was evaluated. The MIC of oregano oil was 0.25% against E. coli and 1% against S. aureus. For rosemary essential oil, the MIC was 8% of against E. coli. There was no activity of rosemary oil against S. aureus. The MBC observed for oregano essential oil was 1% and 0.25% respectively for S. aureus and E. coli. Bacterial analysis during cheese storage with E. coli indicated inhibition of microorganisms by oregano essential oil at a concentration of 0.25%. No alterations were observed regards to physical-chemical attributes. The use of essential oil as an antimicrobial agent has potential for industrial use, and type of microorganism, oil and sensory reflexes in the product must be observed.

Wound healing is a process through which skin maintains itself. Once a wound occurs, the inflammatory and proliferative stages are instigated in reaction to injury. It is established that wound restorative comprises four stages including haemostasis, inflammation, proliferation, and remodeling. The amelioration of wound healing is very challenging as tumors can develop at the site of chronic injury. There are numerous plants, plant extracts and plant based natural products were widely used by tribal communities from ancient times for the treatment of cuts, burns, scars, burns and wounds. The therapeutic potential of these plants is recognized due to the presence of phytomolecules such as phenolic compounds, flavonoids, triterpenoids, saponins, tannins, alkaloids and glycosides. The plant used for the treatments of wound healing includes Achillea millefolium, Andrographis paniculata, Boswellia sacra, Calendula officinalis, Crocus sativus, Curcuma longa, Ehretia laevis, Ehretia microphylla, Glycyrrhiza glabra, Malva sylvestris, Rosmarinus officinalis and Salvia officinalis. This assemblage comprises the structures of phytomolecules isolated from the different extracts of these plants, mechanistic insights and important key findings responsible for wound healing. The mechanistic insights involved in wound healing are similar to cytotoxic, anti-inflammatory and antioxidant agents such as ROS generation, DNA fragmentation and western blotting. This review article is an effort to bridge the gaps in the prevailing literature and thus offers gigantic scope for researchers and academicians betrothed in validation of the customary claims and development of safer and efficient and worldwide recognized natural potential candidates as drugs for healing of wounds, burns and cuts.

Myxobacteria generate natural products with unique chemical structures, which not only feature remarkable biological functions but also demonstrate unprecedented biosynthetic assembly strategies. The stigmatellins have been previously described as potent inhibitors of the mitochondrial and photosynthetic respiratory chain and originate from an unusual polyketide synthase assembly line. While previous biosynthetic investigations were focused on the formation of the 5,7-dimethoxy-8-hydroxychromone ring, side chain decoration of the hydrophobic alkenyl chain in position 2 was investigated less thoroughly. We report here the full structure elucidation as well as cytotoxic and antimicrobial activities of three new stigmatellins isolated from the myxobacterium Vitiosangium cumulatum MCy10943T with side chain decorations distinct from previously characterized members of this compound family. These findings provide further implications considering the side chain decoration of these aromatic myxobacterial polyketides and their underlying biosynthesis.

Emerging evidence suggests that sustained diabetes-associated factors such as inflammation, hyperinsulinemia, and hyperglycemia are major contributors to aberrant cell proliferation and subsequent neoplastic transformation. Epidemiological studies have also highlighted that diabetes promoting a sedentary lifestyle, with or without the direct involvement of insulin, is frequently linked to cancer. However, our knowledge regarding the molecular mechanisms that correlate hyperglycemia to oncogenic transformations remains limited. In this regard, a recent study has proved that hyperglycemia inactivates AMPK, which results in the destabilization of the TET2 and its tumour-suppressive role ultimately predisposing diabetes mellitus patients to cancer. To the management of hyperglycemia associated with oncogenesis, we need to explore a reverse pharmacology-based ethnopharmacological approach. Botanical-derived natural products are structurally and functionally more diverse with fewer or no side effects on humans. The present review discusses the molecular link between hyperglycemia and cancer progression with the effect of natural products as therapeutic agents on the hyperglycemia-cancer associated signalling pathway.

For better understanding the corrosion and corrosion products behavior in the primary circuit of lead-bismuth eutectic (LBE) coolant reactor, the concentration distribution of soluble impurities and the transport of solid particles are investigated through finite-element method. An axisymmetric model of the primary circuit of LBE reactor was constructed to accelerate the calculation the thermal hydraulic filed of circuit. The saturation concentration of solute Fe, Cr and Ni in LBE coolant are identified through the equilibrium of their oxides and PbO. And the very different saturation concentrations of Fe/Cr/Ni in LBE will lead to significant element selective corrosion. The migration of solid oxides particles in the primary circuit is also investigated by the Euler-Lagrange tracing model. The simulation shows that driving force for the movement of particles >100 μm is buoyancy, which lets particles float on a free surface, while particles <10 μm tend to suspend in coolant. However, the behavior of particles also depends on the formation position, the particles formed above the core have the high possibility of re-entering in the core.

Natural products endowed of biological activity represent a primary source of commodities ranging from nutrition to therapeutic agents, as well as cosmetic tools, and recreational principles. These natural means have been used by mankind since centuries if not millennia. They are commonly used all over the world and socio-economical contexts but are particularly attractive in disadvantaged area or economically emerging situations all over the world. This is very likely due to the relatively easy recovery of these bioactive principles from the environment, to the low if any cost as well as ease of administration and to the general popular compliance concerning their consumption/ingestion. In this concise review, we focus on some popular bioactive principles of botanical origin which find a wide use in the Madagascan populations. But, due to space limitations only some most common and largely diffused principles in this country are considered. Finally, a possible nanotechnological administration is discussed in the case where a potential therapeutic usage is envisaged.

Many inflammatory mechanisms are involved in the pathophysiology of COVID-19 infection. COVID-19 inhibits IFN antiviral responses, so we should expect an out-of-control viral replication. “Cytokine storms” occur due to the over-production of pro-inflammatory cytokines after an influx of neutrophils and monocytes/macrophages and may be responsible for the immunopathology of the lung involvement. Several cascades have been reported in the activation process of NF-κB. In this paper, to find new therapeutic options for COVID-19 infection, we reviewed some natural products that could potentially inhibit the NF-κB pathway. We found that sevoflurane, quercetin, resveratrol, curcumin, KIOM-C, bergenin, garcinia kola, shenfu, piperlongumine, wogonin, oroxylin, plantamajoside, naringin, ginseng, kaempferol, allium sativum L, illicium henryi, isoliquiritigenin, lianhua qingwen, magnoflorine, and ma Huang Tang might be effective in inhibiting the NF-KB pathway. These natural products could be helpful in the control of COVID-19 infections. However, larger clinical trials are needed to ascertain the efficacy of these products fully.

The study focused on investigating the natural incidence of deoxynivalenol (DON) in corn and products from corn producing districts of Punjab, Pakistan. The analysis was carried out using HPLC with UV detector and immunoaffinity cleanup columns. The detection limit (LOD) and limit of quantification were 25 and 50 µg/kg, respectively. Total 1220 samples of corn and products were analyzed to detect the DON, and 539 (44.2%) samples were observed to be contaminated with DON (n ≥ LOD). Furthermore, 92 (7.5%) samples of corn & products have DON levels, elevated than the proposed limits of the EU. The data is significantly different from a normal distribution for DON in corn and products samples and from different locations (p < 0.05) for Shapiro-Wilk and Kolmogorov-Smirnov values. However, a significant difference in DON levels was found between corn and corn derived-products types (p ≤ 0.05). The lowest and highest exposure & hazard quotient (HQ) of 0.92 and 9.68 µg/kg bw/d were documented in cornflour samples.

The basis of the discrete-impulse energy supply (DIES) concept is the efficient use of supplied energy. The references describe in detail the general principles of DIES, examine the energy and thermodynamic aspects and the main mechanisms of intensification that can be initiated on the basis of this principle. DIES mechanisms conveniently can be divided into hard and soft ones. The former should be used to stimulate hydromechanical processes, and the latter to accelerate the processes of phase heat and mass transfer, or for the purpose of intensive mixing of multicomponent media. The authors have studied the possibility of using DIES to intensify the hydromechanical processes, in particular emulsification of milk fat (homogenization of milk, preparation of spreads), processing of cream cheese masses. Objects of research were whole non-homogenized milk, fat emulsions, cream cheese mass. In order to evaluate the efficiency of milk homogenization the homogenization coefficient change was studied, which was determined by centrifugation method as the most affordable and accurate one. Emulsions were evaluated according to the degree of destabilization, resistance and dispersion of the fat phase. The rheological characteristics of cheese masses were evaluated by the effective viscosity change.

Dengue virus (DENV) and chikungunya virus (CHIKV) are reemergent arboviruses that are transmitted by mosquitoes of the Aedes genus. During the last several decades, these viruses have been responsible for millions of cases of infection and thousands of deaths worldwide. Therefore, several investigations were conducted over the past few years to find antiviral compounds for the treatment of DENV and CHIKV infections. One attractive strategy is the screening of compounds that target enzymes involved in the replication of both DENV and CHIKV. In this review, we describe advances in the evaluation of natural products targeting the enzymes involved in the replication of these viruses.

Freeze drying (FD) is a technique used to preserve the bioactive content and flavor of samples. Foods with a short shelf life due to nature have been preserved by FD in recent years. The success of the drying technique is thanks to the high retention ability of the bioactive compounds and the flavor of the sample. However, the high cost and energy consumption of the FD limit its usage in several fields. Freezing, primary drying, and secondary drying, which take place in the same device, are the stages of the FD. In addition, several parameters, including pretreatment, size, temperature, sample species, time, and pressure, affect the FD process. These parameters are controlled to increase the effectiveness of the FD on the samples. Moreover, FD was compared with other drying techniques including hot-air drying, microwave drying, vacuum drying, and solar drying to determine its protective capability. It has also been applied to the valorization of waste products, which is a common problem worldwide. For valorization, microencapsulation and powder production have been achieved by FD. In recent years, studies on the effects and use of the FD on various materials increased, providing new aspects for the future of science and food industry.

Abstract: Steamed ginseng water (SGW), the by-product generated from the heated processing of red ginseng, with high content of active substances, better skincare activities, and large amount output ineffective utilization, resulted in environmental pollution and resource waste. In current study, UHPLC-Q-Exactive-MS/MS liquid chromatography-mass spectrometry and multivariate statistical analysis were conducted to characterize the compositional features of the repeated thermal-treated SGW. The total sugar content, total sugar content, total reducing sugar content, total non-reducing sugar content, DPPH, ABTS+, Fe3+ reducing capacity, and the hydroxyl radical scavenging abilities were employed to evaluate the gross contents variation connect with anti-oxidant activities during heat processes. The result revealed the SGW content and antioxidant activity were highly correlated, the 7th SGW sample showed the highest content and the strongest ability on anti-aging capacities. 38 significant common differential markers were screened, by the four compared SGW groups (1- and 3-, 1- and 5-, 1- and 7-, and 1- and 9) through OPLS-DA analysis. The current study showed that the thermal proceeding times could be a vital index value during the recycling operation quality control of SGW, which has a huge potential in anti-aging cosmetic raw materials, In the meanwhile, our results provided a green, sustainable, low-cost thinking of rational application on ginseng resource.

Throughout history, the pursuit of diagnosing and predicting crop yields has evidenced genetics, environment, and management practices' intertwined roles in achieving food security. However, the sensitivity of crop phenotypes and genetic responses to weather and climate remains unclear, hampering the identification of the underlying abilities of plants to adapt to climate change. We hypothesize that the PAWN global sensitivity analysis (GSA) coupled with a genetic by environment (GxE) model -built of environmental covariance and genetic markers structures- can evidence the contributions of climate on the predictability of maize yields in the U.S. and Ontario, Canada (US-CA). The GSA-GxE modeling framework estimates the relative contribution of climate variables such as solar radiation, temperature, rainfall, and relative humidity on improving maize yield predictions in US-CA. We use an improved version of the Genomes to Fields (G2F) initiative multi-dimensional database to build the environmental covariance matrices for the proposed GSA-GxE framework. The PAWN indices show that the aggregated GxE model’s highest sensitivity levels over US-CA were attributed to solar radiation, temperature, rainfall, and relative humidity. In one-third of the locations, rainfall was the primary climate variable responsible for maize yield predictability. Also, a consistent pattern of top sensitivity indices by location indicates that Relative Humidity, Solar Radiation, and Temperature were distributed as the main or the second most relevant drivers of maize yield predictability.

Introduction: Determination of radiological bone age (BA) is a diagnostic method that consists of estimating chronological age (CA) from the bone maturation of children. Although environmental and hormonal factors can interfere with bone ossification, the process is essentially dependent on ancestral inheritance. These ethnic backgrounds are not usually considered, which can lead to biased interpretations and inadequate decision-making by pediatricians or forensic experts. The objective of this study was to determine the precision and accuracy of these radiological procedures among different ethnic groups. Methods: A qualitative systematic review carried out following MOOSE statement and previously registered in the International Prospective Registry of Systematic Reviews PROSPERO (CRD42023449512). Search was performed in MEDLINE (PubMed) (n=561), Cochrane Library (n=261), CINAHL (n=103), Web of Science (WOS) (n=181) and public institutional repositories (n=37) from inception to 31st December 2022 using Mesh as “Diagnostic Techniques and Procedures”, “Diagnostic imaging”, “Radiography”, “Age Determination by Skeleton” and free terms combining with booleans “AND” and “OR”. PEDro scale, and Risk of Bias in non-randomized Studies of Exposure (ROBINS-E) were used to assess methodological quality and risk of bias of included studies respectively. Results: 51 articles (n=19,531) were included according to the inclusion criteria previously established. There was a good to moderate methodological quality and a high to very high risk of bias. Skeletal methods for determining BA were precised in terms of intra-observer and inter-observer reliability in all ethnic groups. Regarding to accuracy of Skeletal methods in Caucasians and Hispanic children, GPA was accurate at all ages, but in youths, TW3 RUS could be a consistent alternative. In Asian and Arab, GPA and TW3 overestimated BA in adolescents near adulthood. In African youths, GPA overestimated BA while TW3 was more accurate in estimating CA. Dental and Cervical radiographic methods are equally precise but lesser accurate than Skeletal BA determination. Conclusion: Skeletal radiographic methods GPA and TW3 are both precise for BA determination among all ethnical groups, but their accuracy in estimating CA can be altered by racial bias.

Tree ordinances can be an effective means of preserving urban forests in the face of development pressures. Despite this, they also have the potential to be divisive among the public - especially when applied to privately-owned land. In this study we surveyed 1,716 Florida urban residents to understand how they value regulation and management of the urban forest. Specifically, we asked about: tree protection ordinances, incentive programs to manage or plant trees, justification for tree removal, and development. Most respondents supported tree protections, even when applied to trees on their own property or when they had the potential to limit development activities. Additionally, there was limited support for removing healthy trees for development. Respondents supported the use of funds for urban forestry efforts – particularly at the local or state level.

The assessment of caprock integrity for underground storage of CO2 and/or enhanced oil recovery (EOR) systems is a multiscale endeavor. Caprock sealing behavior depends on coupled processes that operate over a broad range of length and time scales including nanoscale heterogeneity in capillary and wettability properties to depositional heterogeneity that is basin wide. Larger-scale sedimentary architecture, fractures, and faults can govern properties of potential “seal-bypass” systems that may be difficult to assess. We present a multiscale investigation of geologic sealing integrity of the caprock system that overlies the Morrow B sandstone reservoir, Farnsworth Unit, Texas, USA. The Morrow B sandstone is the target geologic unit for an on-going combined CO2 storage–EOR project by the Southwest Regional Partnership on Carbon Sequestration (SWP). Methods and/or data encompass small-to-large scales, including: petrography using electron and optical microscopy; mercury porosimetry; core examinations of sedimentary architecture and fractures; well logs; a suite of geomechanical testing; and a noble gas profile through sealing lithologies into the reservoir, as preserved from fresh core. The combined data set allows a comprehensive examination of sealing quality by scale, by primary features that control sealing behavior, and an assessment of sealing behavior over geologic time.

Blueberries (Vaccinium section Cyanococcus) are perennial shrubs widely cultivated for their edible fruits. In this study, we used admixture and genetic relatedness analysis of northern highbush (NHB, V. corymbosum) and southern highbush (SHB, V. darrowii) blueberry genotypes and F2 progenies of the V. corymbosum × V. darrowii cross. Using genotyping-by-sequencing (GBS), we generated ~3.34 billion reads (75 bp). The GBS reads were aligned to the Vaccinium corymbosum cv. Draper v1.0 reference genome sequence, and ~2.8 million reads were successfully mapped. From the alignments, we identified 2,244,039 single nucleotide polymorphisms (SNPs), which were used for principal component, haplotype, and admixture analysis. PCA formed three main groups: 1) NHB cultivars, 2) SHB cultivars, and 3) BNJ16-5 progenies. The overall fixation index (FST) and nucleotide diversity for NHB and SHB, indicated wide genetic differentiation, and haplotype analysis revealed that SHB cultivars are more genetically diverse than NHB cultivars. The admixture analysis identified a mix of various lineages of parental genomic introgression. This study demonstrated the effectiveness of GBS-derived SNP markers in genetic and admixture analyses to reveal genetic relatedness and to examine parental lineages in blueberry, which may be useful for future breeding plans.

The last wave of Artificial Intelligence is dedicating particular emphasis to the line of explainability research. The potential of Explainable Artificial Intelligence (XAI) in producing trustworthy computer-aided-diagnosis systems and its usage for knowledge discovery are collecting interest in the Medical Imaging (MI) community to support the diagnostic process and the discovery of image biomarkers. Most of the existing XAI applications in MI were focused on interpreting the predictions returned by deep neural networks, typically including attribution techniques with saliency map approaches and other feature visualization methods. However, these are often criticized for providing incorrect and incomplete representations of the black-box models’ behaviour. This raises the attention in proposing models intentionally designed to be self-explanatory. In particular, part-prototype (PP) models are interpretable-by-design computer vision (CV) models that base their decision process in learning and identifying representative prototypical parts from the input images, and they are collecting increasing interest and results in MI applications. This narrative review provides a summary of existing PP networks, their application in MI analysis and current challenges.

The drought response index (DRI) is an indicator of drought tolerance after adjustment for variation in flowering date and potential yield under well-watered conditions. Using a temperate japonica mapping population of 97 recombinant inbred lines from a cross between Otomemochi (OTM) and Yumenohatamochi (YHM), we evaluated DRI during the reproductive stage under very severe drought in one year and under severe drought in the next year. DRI under very severe drought (−6.4 to 15.9) and severe drought (−3.9 to 8.3) positively correlated with grain dry weight under drought. Three QTLs for DRI were identified: RM3703–RM6911–RM6379 and RM6733–RM3850 both on chromosome 2 in both years combined;. and RM8120–RM2615–RM7023 on chromosome 6 in the second year. The latter collocated with putative genes for signaling and defense mechanisms (e.g., PIN1B, BZIP46) revealed by database analysis. Top-DRI lines retained root dry weight and had bigger steles. QTL-by-environment interaction had a greater relative contribution than the main effects of QTLs. Comparison with three previous studies revealed that the QTLs for DRI were unique to each experiment and/or population; most of them closely colocalized with reported drought-yield QTLs.

Breeding for low hydrogen cyanide (HCN) varieties is a major objective of programmes targeting boiled cassava food product. To enhance breeding for low HCN, knowledge on genetic variation and trait heritability is essential. In this study, 64 cassava clones established across four locations and evaluated for HCN using three HCN assessment methods; 1 to 9 scale, 0 ppm to 800 ppm scale and a quantitative assay based on spectrophotometer readings (HCN_Spec). Data were also collected on the weather variables precipitation, relative humidity, and temperature. Significant differences were observed among clones (P &lt; 0.001) and locations (p &lt; 0.001). There were also significant (p &lt; 0. 001) clone by environment interactions. Locations Arua and Serere posted higher HCN scores among clones and were associated with significantly higher (p &lt; 0.001) mean daily temperature (K) and lower relative humidity (%) across 12-hour and 18-hour intervals. Within locations HCN broad sense heritability estimates ranged 0.22 – 0.64 while combined location heritability estimates ranged 0.14 to 0.32. Relationships between the methods were positive and strong (R2 = 0.75 – 0.92). It is expected that the information herein will accelerate efforts towards breeding for low HCN cassava varieties.

Spatio-temporal variability and dynamics in Sahelian agro-pastoral zones make each local situation a special case. These specificities must be considered to guide the dissemination of agricultural options with a view to sustainable development. The territorial scale of municipalities is not sufficient for this necessary contextualization; the scale of the “village terroir” seems to be a better option. This is the hypothesis put forward by the Global Collaboration for Resilient Food Systems program. By analyzing the links between farm managers and their cultivated land, as well as the spatio-temporal dynamics of “village terroirs” in three regions of Niger (Maradi, Dosso and Tillabéri), this study provides evidence of the existence and functional usefulness of the village terroir for farmers, their land management and their activities. It demonstrates the usefulness of contextualizing agricultural options at this scale. It is based on data collected through participatory mapping and surveys. Their analysis elucidates the links between “terroirs village” and the specific functioning of the agro-socio-ecosystems acting on each of them, thus laying the systemic and geographical foundations for a model of the spatio-temporal dynamics of “village terroirs”. This initial work has opened up new perspectives in modeling and sustainable development.

Clinical trials are research studies performed on people that are aimed at evaluating a medical, surgical, or behavioural intervention. It is a primary way that researchers find out if a new treatment, like a new drug or diet, or medical device is safe and effective in people. In this paper blockchain technology is embedded in a digital twin aiming to improve the quality of clinical trials through the boost of data integrity among the quality-related activities, and to promote participants' safety. First, a blockchain-embedded quality-enabled digital twin is proposed and the interactions among the enablers and peers are highlighted. Then, a prototype of the proposed system is developed, and the data of a pilot trial is used to justify the applicability of the system. The results showed that the proposed system is efficient, and hence it is feasible to adopt into a clinical trial. With the successful development of the proposed system, it is promising to provide effective data integration and knowledge management for improving participant safety.

The purpose of this research has been to provide information about the psychological effects of confinement forced by a prolonged quarantine in a suitable adult sample of 596 Bolivians of both sexes. It was sought to explore the perceptions of the participants about their own emotional state: fears, anxieties, depressions, while they were in isolation to reduce the probability of contagion of COVID 19. Additionally, we were interested in verifying the modulating effects of resilience and self-efficacy on such emotional states. The results indicated, in the same direction of similar studies, significant relationships between high perceived loneliness, high levels of stress and anxiety, with relatively high levels of depression. Likewise, it was clear that stress, perceived loneliness, and anxiety are predictors of depression among those in conditions of forced isolation. Finally, it was found that both resilience and self-efficacy exert a clear moderating effect by attenuating the relationships of perceived loneliness and anxiety, on depression.

Polydopamine (PDA) deposition, obtained from the oxidation of dopamine and other catecholamines is an universal way to coat all known materials with a conformal coating which can subsequently be functionalyzed at will. The structural analogies between polydopamine and eumelanin, the black-brown pigment of the skin, incited to produce stable polydopamine nanoparticles in solution instead of amorphous precipitates obtained from the oxidation of dopamine. Herein, we demonstrate that size controlled and colloidally stable PDA based nanoparticles can be obtained in acidic conditions, where spontaneous auto-oxidation of dopamine is suppressed, using sodium periodate as the oxidant and a protein like alkaline phosphatase as a templating agent. The size of the PDA@Alp nanoparticles depends on the dopamine/enzyme ratio and the obtained particles display the enzymatic activity of alkaline phosphatase with an activity extending up to two weeks after particle synthesis. The PDA@ alkaline phosphatase (Alp) nanoparticles can be engineered in polyelectrolyte multilayered films to potentially design model biosensors.

Curcumin is a promising anti-cancer drug but its applications in cancer therapy are limited due to its poor solubility, short half-life and low bioavailability. In this study, curcumin loaded magnetic alginate / chitosan nanoparticles were fabricated to improve the bioavailability, uptake efficiency and cytotoxicity of curcumin to MDA-MB-231 breast cancer cells. Alginate and chitosan were deposited on Fe3O4 magnetic nanoparticles based on their electrostatic properties. The sizes of the nanoparticles (120-200 nm) were within the optimum range for drug delivery. Sustained curcumin release was obtained use the nanoparticles with the ability to control the curcumin release rate by altering the number of chitosan and alginate layers. Confocal fluorescence microscopy results showed that targeted delivery of curcumin with the aid of magnetic field were achieved. The FACS assay indicated that MDA-MB-231 cells treated with curcumin loaded nanoparticles had a 3-6 folds uptake efficiency to those treated with free curcumin. MTT assay indicated that the curcumin loaded nanoparticles exhibited significantly higher cytotoxicity toward MDA-MB-231 cells than toward HDF cells. The sustained release profiles, enhanced uptake efficiency and cytotoxicity to cancer cells as well as the targeting potential make MACPs a promising candidate for cancer therapy.

Background: Health expenditure in Japan is rising due to an ageing society while simultaneously pressure is mounting to increase spending in other areas such as defense, all in the context of a stagnating economy. Easing pressures on the health care sector through smoking-related cost reductions could thus be a cornerstone to mitigate the looming fiscal threat. Public health policy has encouraged cessation, but this approach has seen limited success. Focusing on cessation alone therefore may not be a sustainable policy strategy and other, new solutions need to be found to reduce smoking-related costs. Methods: Using a status-quo simulation based on hospital resources data derived from the Japanese Ministry of Health, Labour and Welfare, we examine the impact of heated tobacco products (HTPs) on the prevalence of four smoking attributable diseases (chronic obstructive pulmonary disease (COPD), ischemic heart disease (IHD), stroke and lung cancer) and related direct health care costs. Base case scenario assumes a switching rate from combustible smokers to HTPs of 50%. A risk reduction rate of 70% was applied. A sensitivity analysis was performed to determine the impact of parameter changes on output. Results: Our results indicate that 50% of smokers switching to use HTPs instead of combustible tobacco products could reduce the number of patients of the four smoking attributable diseases considered by 12 million cases equivalent to 454 billion JPY in savings. Prefectures located in the north and south of Japan would benefit most. Conclusion: Considering the heterogeneous prevalence rates across population groups and prefectures, a one-size-fits-all, centralized approach to tobacco control is not effective. Health authorities should strategically use multiple interventions to address smoking related health risks and costs. Switching to HTPs should be encouraged in parallel to smoking cessation, and educational efforts should aim to increase the awareness on health risks, especially among younger people.

Virtual commerce has experienced significant growth in recent years, especially in emerging markets such as Peru. This boom has led to an increase in the number of online stores and with it a dispersion of prices which makes it difficult for consumers to make decisions. Comparing prices has become a crucial need to maximize savings and optimize online shopping. This platform uses web scraping techniques to collect price data of desktop products from various Peruvian online stores, presenting the information in a clear and accessible way for users. By centralizing and comparing prices, it not only facilitates purchasing decisions, but also promotes transparency and competitiveness in the market. For this according to the metrics used show 56% of success of the algorithm.

Background: The cumulative exposure of UV radiation can result in dangerous consequences such as skin burns, photoaging, and skin cancer, hence the importance of using photoprotective formulations. Currently, the formulations seek to be more efficient, innovative and reach a wider audience. Many sunscreens are vegan, and have antioxidant substances to ensure additional photochemoprotective action. To evaluate biological, functional, and mechanical characteristics of them on the skin, biometric and rheologic methods can be used. Objective: Evaluate biophysical, rheological and sensorial parameters of Face Care Facial Moisturizing Cream® (P1) and a vegan formulation (P2) by in vitro and in vivo tests. Methods: A UV scan experiment was performed covering the range of 250 to 400 nm. Sun Protection Factor (SPF) was evaluated by Mansur method. Rheological profiles were obtained using a MARS II (Haake®) controlled shear stress and gradient rheometer. Biophysical parameters were analyzed: skin sebum content, hydration level, transepidermal water loss, erythema and melanin level, skin color, and skin pH. The acceptance profile of the formulations by the volunteers was determined using a 9-point hedonic scale and a 5-point purchase intention test. Results: The formulations effectively absorbed light covering the UV radiation spectrum from UVA to UVB. The SPF of P1 was 25.21 and of P2 was 12.10 by in vitro tests. They had also pseudoplastic and thixotropic behavior, it can contribute to better spreadability and to form a protective film. Biometric tests showed an increase in hydration and skin sebum, decreased erythema, and maintenance of skin pH after application of both formulations. The products also had similarly good acceptance and purchase intention by the volunteers. Conclusion: The comparation of a commercialized product and a vegan test version showed very similar rheological and great acceptance profiles. Therefore, the vegan formulation is a good alternative to reach a different market.

Camel milk occupies a pivotal and essential position in the dietary customs of individuals residing in semi-arid and arid areas. Historically, the promotion and distribution of camel milk have been negligible, primarily due to the absence of processing facilities in areas where camels are raised. Consequently, the consumption of untreated camel milk has been predominantly limited to nomadic households. However, owing to its exceptional medicinal properties and health-enhancing effects, a substantial surge in the global demand for camel milk and its derivatives has been observed over the past two decades. This growing demand has prompted the dairy sector to introduce a diverse range of camel milk products, which are distinguished by their enhanced nutritional and functional properties. In contrast to products derived from bovine milk, the current market offers only a limited selection of food items sourced from camel milk. Recent advances in food processing technologies have enabled the production of an array of both dairy and non-dairy products derived from camel milk. This includes a variety of items such as powdered milk, cheese, yogurt, ice cream. Moreover, in certain regions, camel milk is incorporated into customary cuisine, serving as a key ingredient in local culinary practices like fermented milk, camel milk tea, or as a fundamental component in various meals. This review underscores the possibility of transforming camel milk into a range of dairy products by addressing its intrinsic functional constraints. This objective can be realized by adjusting the processing parameters and modifying its chemical composition through enrichment techniques. Furthermore, further research avenues may focus on enhancing product quality and exploring innovative processing techniques.

Productivity has been modest in construction due to many reasons, especially project-specific operations and fragmentation. The main aim of this research is to map the challenges towards industrialization in construction through a comparative study of the manufacturing industry. An inductive approach and a qualitative method are followed by applying semi-structured inter-views, and node-based thematic analysis. The key elements of industrialization in mature man-ufacturing companies are benchmarked. The findings indicate a specific order of steps for indus-trialization in construction. Data and information management with achieved systematization have been sources of productivity in manufacturing companies. However, the systematization starts from the offering, construction companies need to define their offering, that is the products, and define their respective data. Only accurate and good quality data on products enables the systematization of order delivery processes, which are the engine for a company’s success or failure. Continuous efficiency improvement is only possible with systematized processes and respective data related to the processes. The originality involves clarifying the industrialization of construction companies via products, respective data, and processes considering industrialized manufacturing companies.

Biotechnological potential of Thermoanaerobacter strain AK15 to produce ethanol and valuable alcohols from carbohydrates and amino acids were evaluated in present study. The strain is highly ethanologenic, producing a maximum of 1.57 mol ethanol per mol of glucose degraded at high liquid-gas phase ratios. The strain degrades most of the sugars tested as well as starch and pretreated hydrolysates of biopolymers (Whatman paper, newspaper, Timothy grass, Rhubarb leaves, and several macroalgae species) to ethanol mainly. The strains degraded serine and threonine when used as a single substrate, producing mainly acetate and ethanol as end products, and the branched-chain amino acids (leucine, isoleucine, valine) when cultivated in the presence of thiosulfate. The main end products from branched-chain amino acids were a mixture of their corresponding branched-chain fatty acids and alcohols. Finally, the strain was also shown to use butyrate as an electron sink during glucose degradation resulting in the reduced product butanol in addition to end products produced from glucose. Thus, strain AK15 is a promising candidate for ethanol and fine chemical production from a range of lignocellulosic and algal biomass.

Sustainability has been playing a major role on the world stage. As with everything in the be-ginning, it was aligned to purely environmental contexts, but with the passing of the years and the new way of producing, marketing, and consuming, this concept has encompassed other as-pects which are the way of producing products and services. In this article, to obtain information on the implementation of sustainable innovation, a search equation was formulated in the SCOPUS database, contemplating the period from 2018 to 2023 as a time interval, with a total of 62 articles. Once the search of the published articles was carried out, 7 categories were formed to classify the research topic of each of the publications with Bibliometrix software, according to the main ob-jective and methodology used in each one. In this sense, 44% of the articles published are related to open innovation, and 26% of the articles are focused on sustainable business models. At the end of the analysis of the implementation of innovation according to the articles consulted, it was possible to establish that sustainable innovation began an important work, in the mitigation of the adverse impacts.

The realization of value in eco-products represents a rapidly advancing research theme. However, the clarity of relevant concepts, types and operational mechanisms remains elusive. A comprehensive review of current-stage research outcomes in eco-product value realization not only provides a novel approach to rejuvenating regional economies but also proactively contributes to the enhancement of local ecological environments. This article conducts a systematic literature review on the fundamental concepts, research scope and pathways for realizing the value of eco-products. The conclusions are as follows: (1) To clarify the basic concepts of ecosystem services and eco-products, the interrelationship between the two and the research scope of eco-products. (2) To elaborate the method for accounting the value of eco-products. (3) To demonstrate governmental path, market path and collaborative path for realizing the value of eco-products. (4)To review cases pertaining to the realization of value in public eco-products, quasi-public eco-products and operational eco-products both domestically and internationally. Building on this research foundation, the article identifies shortcomings in past research results and proposes key directions for future research progress.

Territory space is an ecological resource carrier and place for human development. Human activities and ecological systems are the basis of ecological product supply. Promoting territory spatial protection and governance by improving the ecological products supply is very important. In this study, we established an ecological products supply capacity evaluation index system involving three types of ecological products, i.e., ecological environmental products, ecological material products, and ecological cultural products. For the case of the Beijing-Tianjin-Hebei region, we comprehensively used principal component analysis, equivalent factor method, and entropy method to evaluate the supply capacity of the ecological products from 2011 to 2021. Then, we analyzed the spatio-temporal pattern combining the natural breakpoint and quantile classification methods and analyzed the obstacle factors using the obstacle degree model of ecological supply. The results show that the supply capacity of different ecological product in each city are closely related to ecological resource endowment. The supply capacity of ecological products exhibited an upward trend, with the highest ecological environmental products supply, relatively smaller ecological material product supply, and the largest growth rate for ecological cultural product supply. The supply capacity of different ecological products varied across cities over time and displayed noticeable spatial differentiation. The main obstacle factors included eco-land, eco-tourism, eco-leisure, park green space, and fishery products, although there were variations among cities. Finally, based on the level, spatial-temporal pattern, and obstacle factors of ecological product supply, we proposed strategies for territory spatial protection and governance from the perspectives of integrated protection of elements, structural regulation, and systematic governance. The results reflected the ecological functional heterogeneity of territory space, which can provide spatial planning guidance for sustainable development.

Klebsiella pneumoniae is one of the most common causes of clinical and asymptomatic mastitis in dairy cattle, also in milk and dairy products affecting its quality. Mastitis caused by K. pneumoniae is even more serious due to its poor response to antibiotic therapy. This study was conducted to detect and identify the presence of K. pneumoniae in milk and dairy products. A total of 234 samples were randomly collected from various locations in Libya. Samples were examined for the presence of K. pneumoniae by conventional cultural techniques that included cultivation in violet red bile agar plus 4-methylumbelliferyl-ß-D-glucuronide (VRBA + MUG) broth, and CHROM agar followed by identification by PCR and partial sequencing of 16S rRNA. Out of the 234 samples of milk and dairy products collected, 16 (6.8%) of the isolates revealed mucoid colonies on agar media phenotypically suggested to be K. pneumoniae. The isolates identification was confirmed by molecular techniques (16S rRNA). Among examined samples, K. pneumoniae was recovered from she camel’s milk, raw cow’s milk, raw fermented milk, Maasora cheese, Ricotta cheese, soft cheese, full cream milk powder, milk powder infant formula, cereal baby food and growing up formula. From the 16 K. pneumoniae isolates; antibiotic susceptibility testing was performed on 12 isolates, the results showed that K. pneumoniae isolates were resistant to more than 8 antibiotics, interestingly, two isolates revealed MBL production. This study emphasized the relationship between K. pneumoniae and raw milk, cheese, milk powder and infant milk retailed in Libya, which is considered as a risk for human health as many of these products did not comply with microbiological criteria of international and/or Libyan standards. The necessary precautions have to be taken to carry out effective sanitary practices during the production in dairy plants, handling and distribution in the markets particularly at local small manufacture scale.

Numerous studies have shown that quinolones residues in the foods exceeding the MRL is harmful to the human health. There are some limitations in the existing methods for the residues, so we developed a new limit test method (TLC-SERS) to rapidly determine following residues: enrofloxacin(A), ciprofloxacin (B), ofloxacin(C), fleroxacin(D), sparfloxacin(E), enoxacin(F), gatifloxacin(G) and nadifloxacin(H). The residues can be preliminarily separated by TLC. Labeling the tested compounds’ position on the thin layer plate by their relative Rf under 254nm ultraviolet, and an appropriate amount of nanometer silver solution should be added to the position. The silver on the plate should be irradiated with 532nm laser to obtain SERS of the compounds. The results showed a significant differences of the 8 quinolones’ SERS; the LOD of the H, A, D, E, C, G, F and B were orderly 9.0, 12.6, 8.0, 19.0, 8.0, 8.4, 9.0 and 12.6 ng/mL, and the RSD≤4.9% for SERS of each quinolones.The limit test results of the 20 samples was consistent with that determined by the UPLC–MS/MS. The above results indicate that the TLC-SERS is specific, sensitive, stable, and accurate, providing a new reference for the rapid limit test of harmful residues in foods.

Background and Aim: Tacrolimus is highly effective in intractable ulcerative colitis, but maintenance may be problematic. This study examined 52-week maintenance and adverse events. Methods: This retrospective study of patients who used tacrolimus from April 2009 to December 2021 (N = 136) examined remission induction rates and background factors in the remission (n = 108) and non-remission groups (n = 28); 52-week maintenance; drug-specific maintenance (azathioprine [n = 58] vs tacrolimus [n = 12] and vs biological product [Bio, n = 8]); and adverse events. Results: The mean observation period was 1230175 days. Remission occurred in 72.7%. Significant differences were observed in sex and endoscopic score (before treatment and 2 weeks after tacrolimus trough levels). Maintenance rate at 52 weeks was 61.6%; significant differences were observed in sex, hospitalization duration, and prednisolone during hospitalization (P < 0.05). Drug-specific 52-week maintenance was 67% with azathioprine, 54% with tacrolimus, and 37% with Bio. No tacrolimus-related serious adverse events occurred that led to discontinuation. Discussion: Remission was more common in women with improved endoscopic scores after tacrolimus trough levels and patients with improved endoscopic scores after tacrolimus therapy. Remission maintenance was more common in women with a long hospitalization at remission and high total steroid dose. Results suggest that treatment with adequate prednisolone use during the period with more inflammation may improve subsequent maintenance. Conclusions: In intractable ulcerative colitis, tacrolimus can induce remission even in patients who cannot use azathioprine for maintenance. Remission can be maintained with azathioprine, tacrolimus, or a Bio.

This review uses the National Cancer Institute (NCI) COMPARE program to establish an extensive list of heterocyclic iminoquinones and quinones with similarities in differential growth inhibition across the 60-cell line panel of the NCI Developmental Therapeutic Program (DTP). Many natural products and synthetic analogues are revealed, as potential NAD(P)H:quinone oxidoreductase 1 (NQO1) substrates through correlations to dipyridoimidazo[5,4-f]benzimidazoleiminoquinone (DPIQ), and as potential thioredoxin reductase (TrxR) inhibitors, through correlations to benzo[1,2,4]triazin-7-ones and pleurotin. The strong correlation to NQO1 infers the enzyme has a major influence on the amount of active compound with benzo[e]perimidines, phenoxazinones, benz[f]pyrido[1,2-a]indole-6,11-quinones, seriniquinones, kalasinamide, indolequinones, and furano[2,3-b]naphthoquinones, hypothesized as prodrugs. Compounds with very strong correlations to known TrxR inhibitors had inverse correlations to the expression of both reductase enzymes, NQO1 and TrxR, including naphtho[2,3-b][1,4]oxazepane-6,11-diones, benzo[a]carbazole-1,4-diones, pyranonaphthoquinones (including kalafungin, nanomycin A, and analogues of griseusin A), and discorhabdin C. Quinoline-5,8-dione scaffolds based on streptonigrin and lavendamycin can correlate to either reductase. Inhibitors of TrxR are not necessarily (imino)quinones, e.g., parthenolides, while oxidizing moieties are essential for correlations to NQO1, as with the mitosenes. Herein, an overview of synthetic methods and biological activity of each family of heterocyclic imino(quinone) is provided.

In recent years, the FDA has approved numerous antitumor drugs that are mutation-based for clinical use. These drugs have improved the precision of treatment and reduced adverse effects and side effects. Personalized therapy is a prominent and hot topic of current medicine and also represents the future direction of development. With the continuous advancements in gene sequencing and high-throughput screening, research and development strategies for personalized clinical drugs have developed rapidly. This review elaborated the recent personalized treatment strategies, which include artificial intelligence, multi-omics analysis, chemical proteomics, and computation aided drug design. These technologies rely on the molecular classification of diseases, the global signaling network within organisms, and new models for all targets, which significantly support the development of personalized medicine. Meanwhile, we summarized chemical drugs such as lorlatinib, osimertinib, and other natural products that deliver personalized therapeutic effects based on genetic mutations. This review also highlights potential challenges in interpreting genetic mutations and combining drugs, while providing new ideas for the development of personalized medicine and pharmacogenomics in cancer study.

Hydrological modeling for water management in large watersheds requires accurate spatially-distributed rainfall time series. In case of low coverage density of ground-based measurements, satellite precipitation products (SPP) constitute an attractive alternative, the quality of which must nevertheless be verified. The objective of this study was to evaluate, at different time scales, the reliability of six SPPs against a 2-year record from a network of 14 rainfall gauges located in the Ankavia catchment (Madagascar). The SPPs considered in this study are the African Rainfall Estimate Climatology (ARC2), the Climate Hazards group Infrared Precipitation with Station data (CHIRPS), the ECMWF Reanalysis (ERA5), the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (IMERG), the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN), and the African Rainfall Estimation (REF2) products. The results suggest that IMERG (R² = 0.63, slope of linear regression a = 0.96, root mean square error RMSE = 12 mm/day, mean absolute error MAE = 5.5 mm/day) outperforms other SPPs at the daily scale, followed by REF2 (R² = 0.41, a = 0.94, RMSE = 15 mm/day, MAE = 6 mm/day) and ARC2 (R² = 0.30, a = 0.88, RMSE = 16 mm/day, MAE = 6.7 mm/day). All SPPs, with the exception of the ERA5, overestimate the ‘no rain’ class (0 – 0.2 mm/day). ARC2, IMERG, PERSIANN, and REF2 all underestimate rainfall occurrence in the 0.2 – 150 mm/day rainfall range, whilst CHIRPS and ERA5 overestimate it. Only CHIRPS and PERSIANN could estimate extreme rainfall (>150 mm/day) satisfactorily. According to the Critical Success Index (CSI) categorical statistical measure, IMERG performs quite well in detecting rain events in the range 2-150 mm/day, whereas PERSIANN outperforms IMERG for rain events larger than 150 mm/day. Because it performs best at daily scale, only IMERG was evaluated for time scales other than daily. At the yearly and monthly time scales, the performance is good with R² = 0.97 and 0.87, respectively. At the event time scale, the probability distribution function PDF of rain gauge values and IMERG data show good agreement. However, at hourly time scale, the correlation between ground-based measurements and IMERG data becomes poor (R² = 0.20). Overall, the IMERG product can be regarded as the most reliable satellite precipitation source at monthly, daily and event time scales for hydrological applications in the study area, but the poor agreement at hourly time scale and the inability to detect extreme rainfall >200 mm/day may nevertheless restrict its use.

Unhealthy diet is an important health problem in the region of the Americas, and Uruguay does not escape this reality. Nutritional problems in Uruguayan school-age children are overweight and obesity. Caloric intake is excessive for 60% of children and 28% of calories come from ultra-processed products (UPP) [CODICEN 2021] [MIDES 2020) (Köncke, Toledo, 2021). In 2018, an evaluation of food intake was conducted in a representative sample of public schools in the city of Montevideo. Food and preparations were categorized according to the NOVA system, later they were analyzed according to the Pan American Health Oganization nutrient profile model (PAHO NPM). Only 0.52% of children consumed exclusively natural foods, unprocessed, minimally processed or culinary ingredients. Twenty-five percent of children consumed ≥ 4 products categorized with excessive content of free sugars, total fat or saturated fat according to the PAHO NPM; in the case of excessive sodium this was 40%. In general, children who included products with excessive free sugars, sodium or saturated fat in their diet exceeded the limits established by PAHO and as a result their diet is of poorer nutritional quality compared to children who did not consume such products.

The present study was conducted to estimate the exposure and risk characterization of the children population of Serbia to Aflatoxin M1 (AFM1) from milk and milk-based food. A total of 3404 samples comprising of milk and different milk-based food samples were collected from various regions of Serbia from 2017 to 2019. Evaluation of the AFM1 exposure was carried out using the deterministic method, whereas risk characterization was evaluated with the calculation of the Margin of Exposure (MOE) and the risk of Hepatocellular Carcinoma (HCC). Detection rates for AFM1 in milk and milk-based food samples ranged between 2% and 79%, with the highest incidence (79%) and mean level (22.34  0,018 ng kg-1) of AFM1 was detected in pasteurized and UHT milk. According to the three consumption estimates, the values of EDI were higher for toddlers as compared with children. Children aged 1–3 years had the highest risk of exposure to AFM1 in milk, with an estimated daily intake of 0.164 and 0.193 ng kg-1 bw day-1 using a lower bound (LB) and the upper bound (UB) exposure scenarios, respectively. Such difference could result from the higher consumption versus weight. Based on the EDI found in this study, the risk of AFM1 due to consumption of milk and milk-based food was low since MOE values obtained were 10000. In addition, the risk of HCC cases/year/105 individuals of different age groups showed that the value of HCC using potency estimates of 0.0017 (mean) was maximum (0.00034) in the age group 1–3 years which indicates no health risk for the evaluated groups. The present study revealed the importance of controlling and preventing AFM1 contamination in milk through continuous monitoring and regular inspection to reduce the risk of AFM1 exposure, especially in children.

Circular Economy involves structural changes in traditional business models and consumers’ behaviour toward recycled products. The recycling of PET products has been increasing but there is still a gap between consumption and demand for PET packaging in Brazil. In this research, the waste reduction was examined under a projective scenario to the current ecological purposes in Brazil for reducing environmental pollution. In that manner, this paper aimed to comprehend the intention to purchase recycled PET products of Brazilian consumers. With a non-probabilistic and convenience sample, the study counts 422 participants. The method employed was based on Structural Equation Modelling and Partial Least Squares, used to test the hypotheses of causality among the variables. Results showed the perception of low quality about recycled products reduced consumers’ intention to purchase. Also, the sustainability of recycled products positively influenced the intention to purchase. In addition, recycled products presented a negative impact on the perceived safety, which could influence the purchase of recycled products in Brazil. We conclude that the image that Brazilian consumers have about recycled products positively affects the intention to purchase.

Significant problems have arisen in the last years, such as climate change, global warming, and hunger. These complications are correlated with the depletion and exploitation of natural resources and environmental contamination. Due to overcrowding, the list of challenges for the next few years is growing. A comprehensive approach was made to the agro-industrial production of Avocado (Persea americana) and the management of all its biomass waste. So, bioprocesses and biorefinery can be used to produce high added-value products. A large number of residues are composed of lignin and cellulose. They have many potentials to be exploited sustainably for chemical and biological conversion; physical, chemical, and natural treatments improve the following operations. There are some applications to many fields such as pharmaceutical, medical, material engineering, and environmental remediation. Possible pathways are mentioned to take advantage of Avocado as biofuels, drugs, bioplastics, and even in the environmental part and emerging technologies such as nanotechnology using bioprocesses and biotech. In conclusion, Avocado and its waste could be transformed into high value-added products in industries above to mitigate global warming and save non-renewable energy.

Background: The Balaruc-les-Bains’ thermal mud was found to be colonized predominantly by microorganisms, with cyanobacteria constituting the primary organism in the microbial biofilm observed on the mud surface. The success of cyanobacteria in colonizing this specific ecological niche can be explained in part by their taxa-specific adaptation capacities, and also the diversity of bioactive natural products that they synthesize. This array of components has physiological and ecological properties that may be exploited for various applications.

Background: Skincare products are used daily to maintain a healthy skin (cleansing, moisturizing, protecting…), but their impact on this first layer, which corresponds to the skin microbiome, is still poorly understood. Preserving natural resources and mechanisms of the skin ecosystem is essential; an original approach based on these premises, called ecobiology, has recently emerged in skincare. Ecobiology considers the skin as an ever-evolving ecosystem which hosts human and microbial cells that interact together with their environment. In this context, we evaluated the impact on the skin microbiome of three types of leave-on face skincare products: a hydrophilic sterile solution, a micellar solution, and an oil-in-water emulsion. Materials and Methods: The individual microbial profiles of 20 Caucasian females were investigated. Samples were obtained twenty-four hours and four days following a daily application of the skincare products versus control area where no product was applied. To analyze the bacterial diversity and abundance of skin microbiome, a 16SrRNA gene sequencing was performed using the Illumina MiSeq platform. Results: Our results confirm the overall diversity of skin microbiome as previously observed and notably reveal the prevalence of Cutibacterium spp. and Staphylococcus spp. on sebaceous site (the back). Bacterial diversity and abundance were not affected by the products either twenty-four hours or four days after application, as indicated by comparison with the control. Moreover, no dissimilarity was observed between the three products versus their control, neither between each product. Conclusions: These preliminary results demonstrated for the first time that three different types of leave-on face skincare products such as a hydrophilic sterile solution, a micellar solution, and an emulsion have no impact on skin microbiome and can be considered as “microbiome friendly”.

Antioxidants for foodstuffs during processing or before packing protects colour, aroma and nutrient content. As regards food safety regulations, long-term efforts have been made in terms of food standards, food control systems, food legislation and regulatory approaches. These have, however, generated several questions on how to apply the law to the diverse food businesses. To answer these questions, a thorough examination of the EU legislator’s choices for food preservation and definitions are provided and discussed with factors affecting microbial growth.

We discuss further details on the concepts of “drug-likeness”, “lead-likeness”, and “natural product-likeness”. The discussion will first focus on natural products as drugs, then a discussion of previous studies in which the complexities of the scaffolds and chemical space of naturally occurring compounds have been compared with synthetic, semi-synthetic compounds and FDA-approved drugs. This is followed by guiding principles for designing “drug-like” natural product libraries for lead compound discovery purposes. We end up by presenting a tool for measuring “natural product-likeness” of compounds and a brief presentation of machine learning approaches and a binary quantitative structure-activity relationship (QSAR) for classifying drugs from non-drugs and natural compounds from non-natural ones, respectively.

Here we consider sums of finite products of Chebyshev polynomials of the third and fourth kinds. Then we represent each of those sums of finite products as linear combinations of the four kinds of Chebyshev polynomials which involve the hypergeometric function ₃F₂.

Determining halal product of fermented foods and bevearages becomes important for muslim consumers due to religious codification of halal. In order to help on site analysis, an alcohol biosensor was under development. The biosensor was constructed using bacteria producing alcohol oxidase (AOX). Bacteria from apple juice was isolated in advance to obtain pure bacteria. The bacteria was cultured in two solid media. Bacteria on the Acetobacter media had a resistance in a solution containing alcohol with a higher concentration. Acetobacter was cultured on solid and liquid media for measuring at various ethanol concentrations (0.01%-3%) with different absorbance value. Bacteria with absorbance value 0.500 had the highest oxidation current peak. Later, it was used as bioreceptor for measuring ethanol by cyclic voltammetry method. The linearity of measurement later was compared with spectrophotometric measurement. By using cyclic voltammetry the linearity had higher R² value than spectrophotometric method. However, it only had stability for two days, there fore it needs more improvement for lasting its lifetime. Basically, electrochemical method has potency for further being improved fur as an alternative method of ethanol on-site measurement.

We extended our model of the S1 tubular segment to address the mechanisms by which SGLT1 interacts with lateral Na/K pumps and tight junctional complexes to generate isosmotic fluid reabsorption via tubular segment S3. The strategy applied allowed simulation of laboratory experiments. Reproducing known experimental results constrained the range of acceptable model outputs and contributed to minimizing the free parameter space. 1. In experimental conditions, published Na and K concentrations of proximal kidney cells were found to deviate substantially from their normal physiological levels. Analysis of the mechanisms involved suggested insufficient oxygen supply as the cause and indirectly, that a main function of the Na/H exchanger (NHE3) is to extrude protons stemming from mitochondrial energy metabolism. 2. The water path from the lumen to the peritubular space is through aquaporins on the cell membrane and claudin-2 at paracellular tight junctions, with a smaller additional contribution to water transport by the coupling of 1 glucose:2 Na:200 H2O in SGLT1. 3. A Na+-uptake component passed through paracellular junctions by solvent drag in Na- and water-permeable claudin-2, thus bypassing the Na/K-pump, in agreement with the findings of early studies. 4. Electrical cross talk between apical rheogenic SGLT1 and lateral rheogenic Na/K pumps results in tight coupling of luminal glucose uptake and transepithelial water flow. 5. Isosmotic transport is achieved by Na-mediated ion recirculation at the peritubular membrane.

The layer-by-layer (LBL) fabrication method allows for controlled microstructure morphology and vertical component distribution, and also offers a reproducible and efficient technique for fabricating large-scale organic solar cells (OSCs). In this study, polymer D18 and PYIT-OD are employed to fabricate all-polymer solar cells (all-PSCs) using the LBL method. Morphological studies reveal that the use of additives optimizes the microstructure of the active layer, enhancing the crystallinity and charge transport capability. The optimized device with 2% CN additive significantly reduces bimolecular recombination and trap-assisted recombination. All-PSCs fabricated by the LBL method based on D18/PYIT-OD deliver a power conversion efficiency (PCE) of 15.07%. Our study demonstrates the great potential of additive engineering via LBL fabrication method in regulating microstructure of active layers, suppressing charge recombination, and enhancing the photovoltaic performance of devices.

Multi-Object Tracking (MOT) is a key technology for Unmanned Aerial Vehicles (UAVs). Traditional tracking-by-detection methods firstly employ an object detector to retrieve targets in each image and then track them based on a matching algorithm. Recently, the popular multi-task learning methods has been dominating this area since they can detect targets and extract Re-Identification (Re-ID) features in a computationally efficient way. However, the detection task and the tracking task have conflicting requirements on image features, leading to the poor performance of the joint learning model compared to separate detection and tracking methods. The problem is more severe when it comes to UAV images due to the presence of irregular motion of large number of small targets. In this paper, we propose a balanced Joint Detection and Re-ID learning (JDR) network to address the MOT problem in UAV vision. To better handle the non-uniform motion of objects in UAV videos, the Set-Member Filter is applied which describes object state as a bounded set. An appearance matching cascade is then proposed based on target state set. Furthermore, a Motion-Mutation module is designed to address the challenges posed by the abrupt motion of UAV. Extensive experiments on the VisDrone-MOT2019 dataset demonstrate that our proposed model, termed as SMFMOT, outperforms state-of-the-arts by a large margin and achieves superior performance on the MOT tasks in UAV videos.

Semi-structured complex numbers H was a number set developed to enable division by zero in ordinary algebraic equations. Its utility has been shown in mathematics and engineering. However, very little has been done to show its usefulness in computer science. Consequently, the aim of this paper was to show the utility of semi-structured complex numbers in computer science by developing a division by zero calculator. First two computer programs were written, one for a standard (STD) calculator and the other for a division by zero (DBZ) calculator. The programs were fed 20000 randomly generated arithmetic equations of varying lengths and the space and time complexity associated with processing these equations were measured and compared to determine the efficiency of each calculator. In the process, three major contributions were made: (1) A representation for semi-structured complex numbers that enables it to be easily used by a computer was developed; (2) It was demonstrated that the DBZ calculator outperforms the STD calculator in terms of efficiency; and, (3) It was shown that the number set H reduced the amount of error handling required to run a computer program. These results provide a firm foundation to advance the number set as a useful tool in computer science.

The aim of this study is to provide a detailed strategy for Safe-by-Design (SbD) 3D printed lab-on-a-chip (LOC) device manufacturing, using Fused Filament Fabrication (FFF) technology. At first, the applicability of FFF in lab-on-a-chip device development is briefly discussed. Subsequently, a methodology to categorize, identify and implement SbD measures for FFF is suggested. Furthermore, the most crucial health risks involved in FFF processes are examined, placing the focus on the examination of ultrafine particle (UFP) and Volatile Organic Compound (VOC) emission hazards. Thus, a SbD scheme for lab-on-a-chip manufacturing is provided, while also taking into account process optimization for obtaining satisfactory printed LOC quality. This work can serve as a guideline for the effective application of FFF technology for lab-on-a-chip manufacturing through the safest applicable way, towards a continuous effort to support sustainable development of lab-on-a-chip devices through cost-effective means.

The article discusses the issue of the sustainable development of the cross-border market for cultural services in a city divided by the state border. The article uses the example of Cieszyn and Český Těšín, a city divided following the decision of the Council of Ambassadors in 1920. The research carried out so far indicates the main constraints in the harmonious functioning of the cross-border market for cultural services in this city, such as: different cultural policies implemented on both sides of the city, language barriers as well as legal and administrative differences. Therefore, the authors undertook research aimed at recognising the role of Euroregional structures in stimulating the sustainable development of this region. On the basis of the analysis of the Cieszyn Silesia Euroregion's documentation and the results of qualitative and quantitative research, the article describes the role of the Euroregion in building a cross-border market for cultural services. Recommendations were also prepared that could constitute the principles of a common cultural policy not only for Cieszyn and Český Těšín, but also for other European cities in the Schengen Area, which, like Cieszyn and Český Těšín, have been divided by a state border.

With the growth of air traffic demand in busy airspace, there is an urgent need for airspace sectorization to increase air traffic throughput and ease the pressure on controllers. The purpose of this paper is to develop a method framework that can perform airspace sectorization automatically, reasonably, which can be used as an advisory tool for controllers as an automatic system, especially for eliminating irregular sector shapes generated by simulated annealing algorithm (SAA) based on region growth method. Two graph cutting method, dynamic Monte Carlo method by changing location of flexible vertices (MC-CLFV) and Monte Carlo method by radius changing (MC-RC) were developed to eliminating irregular sector shapes generated by SAA in post-processing. The experimental results show that the proposed method framework of AS can automatically and reasonably generate sector design schemes that meet the design criteria. Our methodology framework and software can provide assistant design and analysis tools for airspace planners to design airspace, improve the reliability and efficiency of airspace design, and reduce the burden of airspace planners. In addition, this lays the foundation for reconstructing airspace with more intelligent method.

Eco-labelling plays a crucial role in encouraging sustainable consumer behaviour by giving clear information about a product's environmental impact. This study looks at how eco-labelling affects the buying decisions of young consumers in Enugu State, Nigeria. Using a cross-sectional survey approach, 430 undergraduate students from five universities participated in an online questionnaire. The research focused on understanding how aware young consumers are of eco-labels, how these labels influence their buying decisions, and whether they are willing to pay more for eco-labelled products. The data were analysed through descriptive statistics, including average scores and variations. The results showed that young consumers have a moderate to high level of awareness of different eco-labels, with the NAFDAC Green Dot being the most recognised (average score = 4.12, variation = 0.96). Eco-labelling was found to have a significant influence on their purchasing decisions, especially in building trust in the products (average score = 4.31, variation = 0.71) and their willingness to pay a higher price (average score = 4.21, variation = 0.83). Overall, the study shows that eco-labelling has a positive impact on young consumers’ buying choices and could be a valuable tool for promoting more sustainable consumption in Nigeria. The study recommends increasing awareness through educational campaigns, building consumer trust in eco-labelling, and using effective marketing strategies to boost recognition and adoption of eco-labelled products.

In two laboratory trials natural products, including freshly-picked leaves from spearmint, rosemary, and tansy plants; a water extract from soybean plants; peels from a common cucumber; and 1% peppermint oil in hexane were placed in a moist harborage preferred by Argentine ants, Linepithema humile, and the number of ants entering the harborage after two and four hours was counted. None of the recommended home remedies (tansy, cucumber, or soybean extract) deterred ants from an attractive, moist harborage in either trial even when the quantity of these treatments was increased 4- to 10-fold. Freshly picked leaves from rosemary and spearmint plants deterred ants from harboring, and the 1% peppermint oil was the most deterrent of all treatments.

Microplastics, plastic fragments smaller than 5 mm present in the environment due to the decomposition of larger plastics, can cause damage to various ecosystems and species of pollinating insects such as Apis mellifera bees. These bees play a crucial role in the ecology and production of honey and pollen, also serving as bioindicators of environmental quality as they are sensitive to contaminants such as microplastics. In this study, the presence of microplastics in these insects and their bee products, pollen, and honey, collected in August 2021 and August 2023 in rural areas (Tabio and Guasca) of Cundinamarca, Colombia, and urban areas (Universidad Nacional de Colombia) was evaluated. and Pontificia Universidad Javeriana) of Bogotá, Colombia. In each year, 24 bees, 10 grams of honey and 10 grams of pollen were collected per sampling point. Microplastics in bees and their products were identified and quantified by stereomicroscopy, with or without hydrogen peroxide digestion pretreatment. Microplastics were found in bees, pollen, and honey in both periods, with an increase in their quantity observed over time due to increasing environmental pollution. Blue fibers were the most common microplastics, with a greater amount recorded in 2023 compared to 2021.

This study aimed to evaluate the fatty acid (FAs) profile in milk from commercial farms with varying pasture levels in the diet during spring and fall, and to investigate the physical and chemical properties of butter to assess the impact of FAs on technological and nutritional properties. Milk sampling was conducted biweekly from six farms, categorized into high (HP) and low (LP) pasture treatments based on pasture intake: &gt;60% and &lt;35%, respectively. Butter was made from a pasture-based system (GRZ) and a confined system (C). No differences were observed in milk fat percentage between HP and LP in either season. High pasture had 85-66% more conjugated linoleic acid (CLA, p=0.01), 74-48% more trans-vaccenic acid (TVA, p=0.01), and 21-15% more branched- chain FAs (BCFA, p=0.006) than LP in spring and fall, respectively. In fall, butter from C had lower saturated FAs (SFA, p=0.005), higher unsaturated FAs (UFA, p=0.008), and a lower spreadability index (SI, p=0.005) than GRZ, resulting in softer butter. In conclusion, HP in both seasons had higher contents of FAs considered healthy for consumers compared to LP. Contrary to expectations, in fall, C showed higher UFATVA and lower SFA in butter, leading to better technological characteristics than GRZ.

Although Lov\'{a}sz introduced the graph exponential $G^K$ in 1967, this product has received little attention. This paper focuses on the number of components in $G^K$ when exponent $K$ is a complete graph $K_n$. For a connected bipartite $G$, when $K$ is $K_2$, $G^{K_2}$ has three components; and when $K$ is $K_n$ with $n>2$, $G^{K_n}$ produces $\lceil\frac{n+1}{2}\rceil$ components. A connected $G$ with an odd cycle produces one component in $G^{K_n}$.

Senna rugosa is a species found in the Cerrado and used in folk medicine as a vermifuge and in the treatment of poisonous snakebites accidents. In this work, we identified the main secondary metabolites present in ethanolic extracts of the leaves (ELSR) and roots (ERSR) of S. rugosa and evaluated the potential cytoprotective effect against cellular macromolecular damage, as well as the cytotoxic properties of the extracts on the K562 and Jurkat leukemic cell lines. The identification of metabolites was done by liquid chromatography coupled with mass spectrometry. The antioxidant activities were investigated by direct ABTS•+ and DPPH• radical scavenging methods, protection against oxidative damage in proteins and DNA. The cytotoxic properties were investigated against healthy cells, isolated from human peripheral blood (PBMC) and leukemic cell lines. The leaf extract contains catechin, rutin, epigallocatechin derivatives, kaempferol glycosides, luteolin, and dimeric and trimeric procyanidins, while the root extract profile shows obtusichromoneside derivatives, 2-methoxystypandrone, stilbene derivatives, naphthopyranones, and flavanone derivatives. The extracts showed antioxidant activity, with IC50 of 4.86 ± 0.51 µg/mL and 8.33 ± 0.90 µg/mL in the ABTS assay for ELSR and ERSR, respectively. And in the DPPH• assay, the IC50 was 19.98 ± 1.96 µg/mL for ELSR and 13.37 ± 1.05 µg/mL for ERSR. The extracts protected macromolecules against oxidative damage at concentrations of 5 µg/mL. The cytotoxicity test against leukemic strains was observed after 24 and 48 hours of treatment. After 48 h, results against the K562 cell line demonstrate IC50 of 242.54 ± 2.38 µg/mL and 223.00 ± 2.34 µg/mL for ELSR and ERSR , respectively. While against the Jurkat cell line, these extracts showed IC50 of 171.45 ± 2.25 µg/mL and 189.30 ± 2.27 µg/mL, respectively Results on PBMC viability, demonstrate that the extracts showed selectivity for the leukemic cell lines. Together, our results reveal that the leaves and roots of S. rugosa have completely distinct and complex chemical compositions. This study expands the repertoire of identified chemical compounds and underscores their significant pharmacological potential in conditions related to oxidative stress and leukemia.

An increased demand for natural products nowadays most specifically probiotics (PRO) is evident since it comes in conjunction with beneficial health effects for the consumers. In this regard, it is well known that encapsulation could affect positively the PRO's viability throughout food manufacturing and long-term storage. This paper aims to analyze and review various multilayer strategies for encapsulation of PRO. Double-layer encapsulation of PRO by electro-hydrodynamic atomization or electrospray technology has been reported along with layer-by-layer assembly and water-in-oil-in-water (W1/O/W2) double emulsions to produce multilayer PRO-loaded carriers. Finally, their applications in food products are presented. The resistance (cover material) and viability of (PRO) to mechanical damage, during gastrointestinal transit and shelf life of these trapping systems are also described. The PRO encapsulation in double and multiple-layer coatings combined with other technologies can be examined to increase the opportunities for new functional products with amended functionalities opening a novel horizon in food technology.

The present research aimed to identify if consumption values influence the attitudes of Millennials who intend to purchase organic products. The research was quantitative, with a correlational scope and a cross-sectional design, and it was conducted on 509 Peruvian millennials. A questionnaire consisting of 23 questions was administered, and responses were quantified using a five-point Likert scale. The results were processed through an Exploratory Factor Analysis (EFA), Confirmatory Factor Analysis (CFA), and Structural Equation Modeling (SEM) conducted using Statistical Package for Social Sciences 24 and AMOS 24. The study identified that environmental attitudes of Millennials do influence their intentions to purchase organic products, and the antecedents of these attitudes are functional and social values, whereas emotional, conditional, and epistemic values do not. The study confirmed that consumption values, either as a second-order variable or as a single construct, do not influence the attitudes of Millennials who intend to purchase organic products, thus confirming that these dimensions should be measured independently.

The quality of veterinary medicinal products (VMP) is essential for efficient disease management. Therefore, VMPs that do not meet the required standards of quality can lead to increased sickness, death, and the development of antimicrobial resistance, posing a danger to both animals and humans. This study aimed to identify substandard and falsified VMPs on the Rwandan market using the Global Pharma Health Fund (GPHF)-Minilab™. VMP samples were purchased and collected in a cross-sectional study from veterinary retail pharmacies from five districts in four provinces of Rwanda, during May and June 2023. These samples were transported to the Veterinary Laboratory of the School of Animal Sciences and Veterinary Medicine, Nyagatare campus, University of Rwanda, and stored until analysis. The samples were subjected to physical and chemical analysis following the GPHF-Minilab™’s guidelines. A total of 130 samples from two categories of VMP were purchased from 10 veterinary retail pharmacies in urban and rural areas. The results of this study revealed that none of the assessed VMP samples failed physical tests (visual inspection, weight verification, and disintegration test). 10 samples (Sulfamethoxazole/Trimethoprim) out of 130 (7.7%) passed the visual inspections but later failed to comply with Thin-Layer Chromatography result specifications. This is an indication of the presence of substandard and falsified VMP circulating in Rwanda that warrants regular inspection and chemical quality control of VMPs along the supply chain.

Non-timber forest Products (NTFPs) are a broad category of natural resources harvested from forests that do not involve cutting down trees for their wood or timber. NTFPs play a vital role in the livelihoods and economies of many rural communities, particularly in forest-dependent regions. Despite the benefits obtained from NTFPS, little is known about its potential to alleviate poverty in the local communities. The objective of this review is to comprehensively assess the potential of NTFP's contribution to poverty reduction within forest fringe communities. The study employed the systematic review method to delve into the multifaceted relationship between NTFPs and poverty alleviation. We followed the preferred reporting items for systematic reviews and meta-analyses protocol (PRISM-P). In all, 58 research articles were reviewed. The results indicated that NTFPs hold significant promise as a tool for poverty alleviation. Globally, NTFPs have the potential to alleviate poverty and increase household incomes between 19% and 78% within forest fringe rural communities. In addition, the review indicated that countries in Africa and Asia depend highly on NTFPs and provide substantial amounts of income to the locals. However, the potential for NTFPs to reduce poverty is not uniform. It is highly contingent upon local ecological conditions, market accessibility, community involvement, and supporting policies and interventions. In conclusion, this systematic review demonstrates that NTFPs have a substantial role in poverty alleviation. This study underscores the need for continued research and targeted development initiatives to unlock the vast potential of NTFPs in addressing poverty challenges.

This article presents a comprehensive overview of the utilisation of nanotechnology in the cosmetics industry, with a specific focus on developing nanoparticles for the efficient delivery of active ingredients through skin penetration. The review delves into incorporating natural ingredients in cosmetics, exploring their therapeutic properties and the advantages and limitations associated with their use. Furthermore, the article examines the benefits of integrating natural ingredients into skincare products to enhance skin conditions, highlighting the application of nonfibrous technology in areas such as UV protection, anti-ageing effects, moisturisation improvement, and wound healing. Ultimately, the article emphasises the immense potential of nanotechnology to create innovative opportunities and positive societal impacts across various industries.

Saccharomyces cerevisiae fermentation products (SCFP) can potentially promote gastrointestinal growth and immunity in young livestock. However, reports within the existing literature on the effects of SCFP supplements on calves have been inconsistent; therefore, we perform the following experiments to resolve the inconsistencies. A total of 22 Holstein calves [10 d after birth, BW = 48.93 ± 3.99 kg (mean ± SD)] were assigned randomly into two groups, namely the control group (CON) and SCFP group, each having 11 replicas. The calves in the CON were fed a basal diet, while the SCFP group was fed the basal diet supplemented with 5g/head/d SCFP (NutriTek, Diamond V, Cedar Rapids, IA52404, United States) incorporated into feed. All the calves were regularly fed thrice daily at 08:00, 14:30, and 21:00 and had free access to water. A 5-day adaptation phase was followed by a 45-day experimental period. The results showed that compared to the CON, at the end of the d-45 trial, the body weight was significantly greater in the SCFP group (p < 0.05), and during the 1-45 days, the ADG was higher (p < 0.05). The FCR in the 30-45 days SCFP group was higher (p < 0.05). Furthermore, the apparent digestibility of DM, CP, EE, ADF, Ca, and P were significantly increased in the SCFP group, except for NDF (p < 0.05). The concentration of GH and IGF-1 in serum showed a tremendous increase (p < 0.05) with SCFP supplementation on d 15 and d 45. On d 15, SCFP supplementation significantly increased the serum IgA contents (p < 0.05). Notably, on d 15 and d 45, the serum concentrations of IL-1β, IL-6, and TNF-α reduced (p < 0.001). Moreover, the Actinobacteriota in the SCFP group were significantly lower than those in the CON group (p = 0.034). SCFP significantly increased the abundance of Butyricimonas, Parabacteroides, and Ruminococcus. The differences among sob, Chao1, and PD-tree groups were statistically significant (p < 0.05). In conclusion, these results demonstrate that SCFP supplementation improved ADG, apparent digestibility and serum hormone, enhanced immunity, and regulated gut microbiota, thereby jointly promoting the growth of pre-weaning calves.

Background. In a changing European agricultural context, diversification of dairy farms is gaining attention. This study seeks to (1) assess musculoskeletal pain prevalence associated with tasks such as butter, yogurt, and cheese production; and (2) analyze associated risks. Methods. Observing 31 mostly female workers, it utilized the ERGOROM questionnaire, a methodology adapted from the Institut National de Recherche et de Sécurité, and Key Indicator Method forms. Results. Findings revealed that tasks like load carrying (42% of workers), manual work (17%), and awkward postures (14%) resulted in musculoskeletal pain, predominantly in the lower back (65%), neck (39%), and dominant upper limb areas (shoulder: 61%, elbow: 26%, and wrist: 65%). While psychosocial risks remained low, concerns arose from workload, hygiene standards, and resource unpredictability. Conclusions. As dairy farming evolves from artisanal to semi-industrial, the study emphasizes the importance of ergonomic adaptations to protect farmer health and prevent musculoskeletal disorders during diversification.

As customer demand for green products increases in the digital economic era, this study analyses the green innovation of the e-tailer and supplier in drop shipping models. Moreover, drop shipping e-tailers and suppliers with a drop shipping option need to make choices regarding whether to provide green or normal products to the market. When a supplier with a drop shipping option produces green products, more fees may be invested on the production of green products than on normal products. The drop shipping e-tailers and suppliers with a drop shipping option can also choose to sell normal products at a low cost, as before. This study designs four models of drop shipping e-teilers and suppliers with a drop shipping option under different choices, analyzes their operational process in drop shipping models, and investigates five theorems. The optimal pricings decisions and green degree of drop shipping e-tailers and suppliers with a drop shipping option were evaluated in this study. The impacts of the green innovation factor, green elasticity coefficient, manufacturing and distribution costs on the drop shipping e-tailers and suppliers with a drop shipping option, and the effect of other environmental parameters on the green degree of green products are also analyzed through computer simulation. The findings of the simulation analysis provide valuable guidance for e-tailers and suppliers with green innovation in drop shipping models and offer important academic and practical implications for e-commerce and the digital economy.

Consumer preference for products made from transgenic technology has been widely studied, yet few studies exist exploring the factors influencing producers’ adoption of transgenic technology. Based on field surveys in Chinese provinces of Shanxi, Henan and Shandong, we employed a gambling experiment to capture producers’ risk preferences by estimating their risk aversion coefficients. We further estimated producers’ risk amplification and risk perception of GM technology. Using ordered logit model and Poisson model we identified the major factors influencing producers’ adoption of transgenic technology. We found the factors impacted the decision of producers from different regions in different ways. The results showed that over 60% of participants amplified the risk of transgenic crops. When there was potential risk, producers might not be rational even if they had high level of knowledge and cognition about the technology. Our results shed light on government policies aiming to increase the adoption of new technologies by producers.

The quality and safety of fermented milk products, which make up a sizeable portion of human nutrition, are greatly influenced by both the milk itself and the starting cultures employed to ferment it. Lactic acid bacteria (LAB) create a variety of metabolites throughout the fermentation process, altering the organoleptic properties of the substrates. The final product’s nutritional value and digestibility are enhanced by fermentation of the raw materials, which also adds vitamins, vital amino acids, and fatty acids. The quality and safety of fermented milk products, which make up a sizeable portion of human nutrition, are greatly influenced by both the milk itself and the starting cultures employed to ferment it. The inhibition of the growth of pathogenic microbes, which lowers the likelihood of the emergence of foodborne diseases, is another crucial function of LAB. A variety of pathogenic bacteria are frequently present in raw (unpasteurized) milk, and other raw materials; these pathogenic bacteria should be removed during the fermentation process. As a result, a variety of LAB metabolites, such as hydrogen peroxide, organic acids, and bacteriocins, function as bio preservative agents, enhancing food safety and lengthening the shelf life of the finished products.

Diabetes and its complications are a global health burden, necessitating novel therapeutic approaches. Natural products and derivatives are gaining attention as potential agents for managing diabetes due to their diverse constituents and pharmacological activities. Algae, in particular, offer promising bioactive compounds with antidiabetic properties. This review provides an overview of natural products derived from algae in diabetes management, including advancements and future prospects. It highlights the significance of natural products in diabetes, explores algae's diversity, bioactive compounds, and mechanisms of action. The challenges, limitations, and strategies for optimizing algae-based interventions are discussed, alongside future research directions. Algae's multifaceted pharmacological activities and chemical constituents make them attractive for developing novel antidiabetic therapeutics. Further research and optimization of algae-based interventions have the potential to address the global burden of diabetes and improve patient outcomes.

Breast cancer is one of the most common types of malignant tumors worldwide and the leading cause of cancer-related deaths in women. According to the latest report from the World Health Organization, breast cancer has surpassed lung cancer, becoming the most diagnosed cancer globally. Herein, a systematic, quantitative, and visual analysis of the scientific achievements in natural products research and development for breast cancer over the past 30 years is presented. The study utilizes bibliometric and knowledge graph visualization techniques to analyze the trends, co-occurrence of keywords, cooperative networks, cited literature, and research hotspots in the field. The analysis shows that breast cancer natural drug development involves mutual cooperation between multiple countries, with China, the United States, and India being the most active players. Pharmacology is the discipline with the largest number of articles published in nearly 30 years. The study also reveals that the extraction of drugs from organisms and their metabolites is an important direction in the current development of anticancer drugs. The development of natural medicines for breast cancer together with the mining of genetic knowledge play an important role in treating human breast cancer. The research presented here provides insights into the current state of natural product research and development for breast cancer, and highlights the need for strengthening mutual communication and cooperation between countries and scientific research institutions to enhance the development of breast cancer treatment technologies and natural medicines.

Disinfection byproducts (DBPs) are formed whenever disinfectant ingredients are in contact with organic matter. Due to widespread increase in production and use of disinfectants and antiseptics, the presence of their components in coastal environments is increasing. However, very limited scientific literature is available in regard to the occurrence of DBPs and related compounds in the coastal zone and particularly in seawater. In this context, the aim of this preliminary compilation is to outline the main up-to-date findings and raise awareness on their increasing occurrence in coastal environments. Sampling and analysis of marine samples in the USA, Spain, China, Taiwan, Malaysia, Korea, Kuwait and Hong-Kong revealed the presence of several categories of DBPs and related compounds in coastal environments, with the highest levels being detected in urban areas, probably related to the nearby wastewater treatment plants. The investigations considered in this preliminary compilation, report the detection of DBPs and related compounds as well as the formation of toxic brominated and iodinated DBPs in high levels due to chlorination of wastewater, especially after use of seawater for flushing in toilets. New DBP groups have also been detected, namely halogenated phenolic DBPs and halopyrroles.

The genus Beauveria include important entomopathogenic and endophytic fungi, among them, Beauveria bassiana is the most studied species. However, there are few knowledge regarding their antimicrobial activity. The current research has been conducted to evaluate in vitro antagonistic activity of B. bassiana and the antimicrobial efficacy of its Exo and Endo metabolites against Bacillus cereus, B. megaterium, Clavibacter michiganensis (gram positive bacteria, G+ve), Xanthomonas campestris, Pseudomonas aeruginosa and P. fluorescence (gram negative bacteria, G-ve). In addition, Solid-phase microextraction (SPME) was coupled to Gas Chromatography-Mass Spectrometry (GC/MS) to qualitatively measure the volatile organic compounds (VOCs) metabolic profile of the most efficient studied isolate of B. bassiana. The obtained results showed that, the isolate UniB2439-3 has promising antibacterial effect against most of studied target bacteria. SPME-GC/MS analysis of VOCs revealed the presence of ethanol; butanal,2-methyl; 2,4-dimethyl-1-heptene; octane, 4-methyl and β-elemene as the main dominant bioactive compounds. The outgoing results explicated that the efficient isolate of B. bassiana can be potentially used as a biocontrol agent against several bacteria especially G+ve ones.

In the present study the effects of Origanum onites L. extract and essential oil of O. onites L. on the antioxidant status of the liver and brain of mice were investigated. Due to certain disadvantages of essential oils, such as poor solubility, high volatility, sensitivity to UV light and heat, formulation of liposomes with Oregano essentials (OE) was optimized and used in this study. The results demonstrated that the best composition of the lipid carriers and Oregano essentials were conducted in terms of the PDI, mean particle size and EE. The LE4 formulation contained Lipoid S100 of 45 mg, Lipoid S75 of 45 mg and 90 mg of EO. The administration of O. onites L. extract to mice for 21 days significantly decreased glutathione (GSH) level in the liver and brain of mouse as well as malondialdehyde (MDA) concentration in the liver. In the brain of mice MDA level significantly increased after this extract consumption. Whereas liposomes with OE significantly decreased GSH concentration in mouse brain and MDA concentration in mouse liver but increased (p&gt;0.05) GSH level in liver and MDA concentration in brain of mice compared with the control group. It was investigated that both, O. onites L. extract as well as liposomes with OE of this plant material make changes in the antioxidant status in the liver and brain of mice.

Atopic dermatitis (AD) is a chronic eczematous inflammatory disease that may arise from environmental, genetic and immunological factors. Despite the efficacy of current treatment options like corticosteroids, such approaches are mainly focused on symptoms relief, and may present certain undesirable side effects. In recent years, investigation regarding isolated natural compounds, oils, mixtures and/or extracts, have gained scientific attention because of their high efficiency and moderate to low toxicity. Despite their promising therapeutic effects, the applicability of such natural health care solutions is somehow limited by their instability, poor solubility, and low bioavailability. Therefore, novel nanoformulation-based systems have been designed to overpass these limitations, thus enhancing the therapeutic potential, by promoting the capacity of these natural drugs to properly exert their action in AD-like skin lesions. For the best of our knowledge, this is the first literature review that focused on summarizing the last nanoformulation-based solutions loaded with natural ingredients, and specifically for the management of AD. We suggest that future studies should focus on robust clinical trials that may confirm the security and effectiveness of such natural-based nanosystems, thus paving the way for more reliable AD treatments.

The objective of this study was to analyze the in vitro stability and toxicity of liposomes containing guarana in skin cell lines. The liposomes were produced by the reverse phase evaporation method containing 1 mg/mL guarana. The stability of the liposomes was evaluated by physical-chemical parameters for up to 90 d using three different storage conditions. The cytotoxicity of guarana (GL), liposomes (B-Lip), and guarana-loaded liposomes (G-Lip) was evaluated on spontaneously immortalized human keratinocyte cell lines (HaCaT), murine swiss albino fibroblasts (3T3), and human fibroblast (1BR.3.G). The evaluation was performed using cellular viability analysis. The techniques used were 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and neutral red capturing (NRU) and the analyses were conducted after 24, 48, and 72 h exposure of these cells to the different treatments. The G-Lip exhibited physical-chemical stability for 60 d when the samples were stored in a refrigerator. The GL, B-Lip, and G-Lip demonstrated low cytotoxicity in the three cell cultures tested since a low reduction in cell viability was only observed at the highest concentrations. In addition, greater cell damage was observed for B-Lip; however, guarana protects cells from this damage. Thus, G-Lip structures can be considered as promising systems for topical applications.

Activated Corrosion Products (ACPs) formation and deposition pose a critical safety issue for nuclear fusion reactors. The working fluid transports the ACPs towards regions accessible to worker personnel. Predicting ACPs formation deposition and transport is fundamental for source term identification, reduction of radiation exposure assessment, maintenance plan definition, design optimization, and waste management. The code OSCAR-Fusion has been developed by the CEA (France) to evaluate the ACPs generation and transport in closed water-cooled loops for fusion application. This work aims at assessing the impact of water chemistry on the transport, precipitation, and deposition of corrosion products for the EU-DEMO divertor Plasma Facing Unit Primary Heat Transfer System. Sensitivity analyses and uncertainty quantification are needed due to the multi-physics phenomena involved in ACPs formation and transport. The OSCAR-Fusion/RAVEN code coupling developed by the Sapienza University of Rome and ENEA has been used. This work presents the perturbation results of different parameters chosen for a closed water-cooled loop considering a continuous scenario of 1888 days. The aim of this work is to assess the variation of build-up of ACPs, perturbing the alkalizing agent concentration into the coolant and the corrosion and release rates of different materials.

The genus Beauveria include important entomopathogenic and endophytic fungi, among them, B. bassiana is the most studied species. However, there are few knowledge regarding their antimicrobial activity. The current research has been conducted to evaluate in vitro antibacterial efficacy of five isolates of B. bassiana against Bacillus cereus, B. megaterium, B. mojavensis, Clavibacter michiganensis (gram positive bacteria, G+ve), Xanthomonas campestris, X. vesicatoria, Escherichia coli, Pseudomonas aeruginosa and P. fluorescence (gram negative bacteria, G-ve). In addition, chemical composition of the principal diffusible metabolites and volatile organic compounds (VOCs) of the most efficient studied isolate of B. bassiana has been carried out using GC-MS analysis. The obtained results showed that, the isolate UniB2439-3 has promising antibacterial effect against most of studied target bacteria. GC-MS analysis of diffusible metabolites detected the presence of hexanedioic acid, bis(2-ethylhexyl) ester as the main compound in the cell-free culture filtrate. Furthermore, GC-MS analysis of VOCs revealed the presence of ethanol; butanal,2-methyl; 2,4-dimethyl-1-heptene; octane, 4-methyl and β-elemene as the main dominant bioactive compounds. The outgoing results explicated that, the isolates of B. bassiana have promising antibacterial activity which could be correlated to their diffusible and VOCs metabolites. Therefore, the selected isolate can be potentially used as a biocontrol agent against several bacteria especially G+ve ones. Taking in consideration that the antibiotics are forbidden in agriculture in many countries worldwide, search for possible natural alternatives as efficient antimicrobial agents are highly interesting.

The importance of understanding the corrosion mechanisms of excavated metal artefacts help in determining the physico-chemical parameters of the burial environment and the formation of different corrosion products. These products can be observed and analysed with the help of various techniques that provide information on their morphology, chemical composition and structure. The analysis of ancient coins is extremely challenging in the presence of heavily corroded surfaces; as quantitative information may not exactly concur with its bulk composition. In the case of silver coins, the use of surface information can be used as a guide for bulk composition only. The current study carries out investigation and characterization of selected coins from a large coin hoard excavated from Amheida, Dakhla oasis, Egypt. The study and analysis of the alloy composition and corrosion products was performed using a multi-technique approach which included Light optical microscopes, Scanning Electron microscope (SEM) coupled with energy dispersive spectroscopy (EDS) and X-ray diffraction analysis. Investigation of the coins revealed the presence of a thick active inhomogeneous corrosion crust, while analysis showed that the coins were made from a binary silver copper alloy (billon) while the corrosion crust was rich in chlorides and carbonates, later identified by XRD analysis as Paratacamite, Malachite and Chrysocolla.

As the rate of discovery of new antibacterial compounds towards multidrug resistant bacteria is declining, there is an urge for the search of molecules that could revert this tendency. Acinetobacter baumannii has emerged as a highly virulent Gram-negative bacterium that has acquired multiple mechanisms against antibiotics and is considered of critical priority. In this work we developed a quantitative structure-property relationship (QSPR) model with 592 compounds for the identification of structural parameters related to their property as antibacterial agents against A. baumannii. QSPR mathematical validation (R2 = 70.27, RN = -0.008, aR2 = 0.014 and δK = 0.021) and its prediction ability (Q2LMO= 67.89, Q2EXT = 67.75, a(Q2)= -0.068, δQ = 0.0, rm2 = 0.229, and ∆rm2 = 0.522) were obtained with different statistical parameters; additional validation jobs were done using three sets of external molecules (R2 = 72.89, 71.64 and 71.56). We used the QSPR model to perform a virtual screening on the BIOFACQUIM natural product database. From this screening our model showed that molecules 32 to 35 and 54 to 68, isolated from different extracts of plants of the Ipomoea sp., are potential antibacterial against A. baumannii. Furthermore, biological assays showed that molecules 56 and 60 to 64 have a wide antibacterial activity against clinical isolated strains of A. baumannii, as well as other multidrug resistant bacteria including Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, and Pseudomonas aeruginosa. Finally, we propose 60 as a potential lead compound due to its broad-spectrum activity and its structural simplicity. Therefore, our QSPR model can be used as a tool for the investigation and search of new antibacterial compounds against A. baumannii.

According to this study, approximately half of Africa's forests are utilized primarily or partially for the production of wood and non-wood commodities. Aims to evaluate Africa's forestry and forest products, namely Wood Forest Products (WFPs) and Non-wood Forest Products (NWFPs) in the sixteen (16) West African countries. While adhering to the following guidelines: wood extraction and preparation, analyzing wood primarily used as an energy source in Africa, identifying non-wood forest products in Africa, the state of export, trade, and customs procedures in West Africa, and examining the role of forests and forest stakeholders in Africa's low-carbon economy transition. An exploratory literature review of selected wood forest products and non-wood forest products (plants and animals) in West Africa identifying the country, the natural land area with the natural habitat issues of the forest, the species most harvested and traded in the West African sub-region. The study reemphasized some government legislation, policies, and market trade failures and limitations while also stating that trees may help in the low-carbon revolution through interventions aimed at maintaining, improving, and restoring natural capital have demonstrated that high environmental requirements of sustainable forest management (SFM) may be met in both natural and planted forests. The study identified a systematic assessment of the most common forest products (wood and non-wood forest products) considering the available data on the national forest reserves of the selected countries in West Africa. The study also revealed the need for biodiversity conservation of the available forest reserves to help mitigate the impact of global warming targeting the United Nation’s Sustainable Development Goal 13- Climate Action. Which is focused on integrating climate change mitigation, adaptation, impact reduction, and early warning signs into the national policies, improving forest planning and management education, awareness-raising, and institutional capacity within the sub-region.

Natural products have been used for the treatment of human diseases since ancient history. Over time, due to the lack of precise tools and techniques for the separation, purification, and structural elucidation of active constituents in natural resources there has been a decline in financial support and efforts in characterization of natural products. Advances in the design of chemical compounds and the understanding of their functions is of pharmacological importance for the biomedical field. However, natural products regained attention as sources of novel drug candidates upon recent developments and progress in technology. Natural compounds were shown to bear an inherent ability to bind to biomacromolecules and cover an unparalleled chemical space in comparison to most libraries used for high-throughput screening. Thus, natural products hold a great potential for the drug discovery of new scaffolds for therapeutic targets such as Sirtuins. Sirtuins are Class III histone deacetylases that have been linked to many diseases such as Parkinson`s disease, Alzheimer’s disease, type II diabetes, and cancer linked to aging. In this review, we examine the revitalization of interest in natural products for drug discovery and discuss natural product modulators of Sirtuins that could serve as a starting point for the development of isoform selective and highly potent drug-like compounds.

The use of biodiesel fuels in compression ignition engines leads to decrease CO, PM, HC and smoke opacity. However, NOx emissions increase importantly. Various methods to reduce NOx are used namely the EGR, the water injection method and the steam injection method. In this study, the steam injection method has been used instead of the other methods because of its benefits. This study examines the effects of steam injection on combustion products of diesel and biodiesel fuels by considering chemical equilibrium in order to determine the equilibrium combustion products involving 10 combustion products. A developed simulation code determing the equilibrium mole fractions and thermodynamic properties of combustion products is used for diesel and biodiesel fuels. It can be used for any fuel consisting of carbon, hydrogen or any oxygenated fuel. The results show that the mole fraction of CO2 and CO decrease with the steam injection ratios. NO mole fractions decrease with steam injection for lean mixtures but they increase slightly in the case of rich mixtures. The specific heat of combustion products increase with the steam injection ratios. Thus, the engine performance can be improved using the method. The model has been validated by comparing model results with the ones of NASA CEA software and GASEQ software using the methane as fuel. The relative errors of equilibrium mole fractions and thermodynamic properties of combustion products are less than 0.98 %.

Recent advances in sampling and novel techniques in drug synthesis and isolation have promoted the discovery of anticancer agents from marine organisms to combat this major threat to public health worldwide. Bryozoans, filter-feeding, sessile aquatic invertebrates often characterized by a calcified skeleton, are an excellent source of pharmacologically interesting compounds including well-known chemical classes such as alkaloids and polyketides. This review covers the literature for secondary metabolites isolated from marine cheilostome and ctenostome bryozoans that have shown potential as cancer drugs. Moreover, we highlight examples such as bryostatins, the most known class of marine-derived compounds from this animal phylum, which is advancing through anticancer clinical trials due to their low toxicity and antineoplastic activity. The bryozoan antitumour compounds discovered until now show a wide range of chemical diversity and biological activities. Therefore, more research focusing on the isolation of secondary metabolites with potential anticancer properties from bryozoans and other overlooked taxa covering wider geographic areas is needed for an efficient bioprospecting of natural products.

Cyanobacteria are photosynthetic microorganisms that colonize diverse environments worldwide, ranging from ocean to freshwaters, soils, and extreme environments. Their adaptation capacities and the diversity of natural products (molecules, metabolites, or compounds) that they synthesize support the cyanobacterial success for the colonization of their respective ecological niches. Although cyanobacteria are well-known for their toxin production and their relative deleterious consequences, they also produce a large variety of molecules that exhibit beneficial properties with high potential for various fields of application (e.g., synthetic analog of the dolastatin 10 used against Hodgkin lymphoma). The present review specially focuses on the beneficial activities of cyanobacterial molecules described so far. Based on an analysis of 670 papers, it appears that more than 90 genera of cyanobacteria have been found to produce compounds with potential beneficial activities, most of them belonging to the orders Oscillatoriales, Nostocales Chroococcales, and Synechococcales. The rest of the cyanobacterial orders (i.e., Pleurocapsales, Chroococcidiopsales, and Gloeobacterales) remain poorly explored in terms of their molecular diversity and relative bioactivity. The diverse cyanobacterial molecules presenting beneficial bioactivities belong to 10 different chemical classes (alkaloids, depsipeptides, lipopeptides, macrolides/lactones, peptides, terpenes, polysaccharides, lipids, polyketides, and others) that exhibit 14 major kinds of bioactivity. However, no direct relation between the chemical class and the bioactivity of these molecules has been demonstrated. We further selected and specifically described 50 molecule families according to their specific bioactivities and their potential uses in pharmacology, cosmetology, agriculture, or other specific fields of interest. This up-to-date review takes advantage of the recent progresses in genome sequencing and biosynthetic pathway elucidation, and presents new perspectives for the rational discovery of new cyanobacterial metabolites with beneficial bioactivity.

Improving the efficiency of the supply process in prefabricated components is challenging and requires accounting for a variety of risks involved in the management of the suppliers. The purpose of this study is to present a method to account for the systematic trade-offs between several supplier alternatives. A novel framework is presented for the whole assessment of supplier alternatives by taking advantage of the information extracted from customized building information modeling (BIM) and a database required for assessment of impacts. A data library related to assessment criteria for supply alternatives is built to facilitate the storage and sharing of information. Analytic hierarchy process (AHP) is used to select the optimal supplier that is able to provide the most satisfaction for the determined criteria. The proposed framework was also illustrated by the implementation in a mega project. The study implication is that BIM-enabled supplier selection can indeed lead to more benefits and higher values for all stakeholders.

A large variety of remote sensing-based land use/land cover (LULC) products are currently available on national and global scales. This literature review and in-situ validation study evaluates the suitability of these products for local scale applications in the complex terrain of the Ethiopian mountains. For the review, 146 research papers were analyzed. Most studies (73%) have been published since 2013 and are based on individually computed maps. Not a single study relied on readily available LULC products. Nine readily available LULC products with 20, 30, 300, 500 and 1,000 m spatial resolution have been identified at national and global scales. To complement and extend this body of research, the recent (since 2013) LULC products were validated using 185 ground truth points collected in the Bale Mountains National Park between 1,500 and 4,385 m a.s.l. The results indicate a rather poor overall accuracy (<50%).

Malaria, as a major global health problem, continues to affect a large number of people each year, especially those in the developing countries. Effective drug discovery is still one of the main efforts to control malaria. As natural products are still considered as a key source for discovery and development of therapeutic agents, we have evaluated more than 2000 plant extracts against Plasmodium falciparum. As a result, we discovered dozens of plant leads that displayed antimalarial activity. Our phytochemical study of some of these plant extracts led to identification of several potent antimalarial compounds. The prior comprehensive review article entitled “Antimalarial activity of plant metabolites” by Schwikkard and Van Heerden (2002) reported structures of plant-derived compounds with antiplasmodial activity and covered literature up to the year 2000. As a continuation of this effort, the present review covers the antimalarial compounds isolated from plants, including marine plants, reported in the literatures from 2001 to the end of 2017. During the span of the last 17 years, 175 antiplasmodial compounds were discovered from plants. These active compounds are organized in our review article according to their plant families. In addition, we also include ethnobotanical information of the antimalarial plants discussed.

Brazil has ideal conditions for the large-scale use of cabotage cargo transportation: a vast coastline with almost 7,400 km, approximately 70% of the population resident in a coastal range of up to 200 km from the coast and a strong concentration of activities economic along the coast. However, there is an absolute domain of road modal for the transportation of goods, and cabotage is underused. The purpose of the study was to raise the main barriers that negatively impact the performance of Brazilian cabotage. To this end, it was used to bibliographic and documentary research, based on studies already published in journals, doctoral theses, master's dissertations, congress annals, technical reports and research on government-related government agencies sites, navigation companies and entities related to cabotage. The main barriers that contribute to the low use of cabotage in Brazil were identified and analyzed, as well as possible alternatives of solution for sustainable development of this mode of transport. Such a study will certainly serve as subsidies for the definition of public policies aimed at better use of Brazilian cabotage, as well as to encourage navigation companies to invest more in the transport of goods by cabotage, in order to contribute to the reduction of trucks on highways Brazilian and for environmental preservation.

To investigate the repair mechanism of umbilical cord mesenchymal stem cells (UC-MSCs) in hydrogel on pancreatic β-cells in diabetes, MIN-6 damaged by streptozotocin (STZ) in vitro was used in co-culture with UC-MSCs in hydrogel (UC-MSCs + hydrogel). It was found that UC-MSCs + hydrogel had a significant repair effect on injured MIN-6 cells, which was better than the use of UC-MSCs alone (without hydrogel). After repair, the expression of superoxide dismutase (SOD) and catalase (CAT) as well as the total antioxidant capacity (T-AOC) of the repaired MIN-6 cells were increased, effectively reducing the oxidative stress caused by STZ. In addition, UC-MSCs + hydrogel were able to curb the inflammatory response by promoting the expression of anti-inflammatory factor IL-10 and reducing inflammatory factor IL-1β. In addition, the expression of both nuclear antigen Ki67 for cell proliferation and insulin-related genes such as Pdx1 and MafA was increased in the repaired MIN-6 cells by UC-MSCs + hydrogel, suggesting that the repair effect promotes the proliferation of the injured MIN-6 cells. Compared with the use of UC-MSCs alone, UC-MSCs + hydrogel exhibited longer survival time of UC-MSCs, because the porous structure and hydrophilic properties of the hydrogel could affect the growth of cells and slow down their metabolic activities, resulting in a better repair effect on the injured MIN-6 cells.

1) Background: Several studies have shown the benefit of drawing when learning anatomy. Virtual Reality (VR) also appears to be useful to increase the understanding of the location of anatomical structures. This study aims to describe how students in an Operating Room Nursing (OR nursing) master study program perceive the benefit of active learning methods, including drawing and the use of VR. 2) Methods: We combined these two methods in a class of 29 students. 38 half-finished drawings of anatomical structures were made. The students were to complete these during lectures with guidance from the teacher. The students also attended a two-hour VR session where they were to find various anatomical structures. A paper questionnaire was applied to evaluate the teaching program. Data were analyzed statistically. 3) Results: The students highly appreciated these learning methods. They reported that drawing made them work more actively during lectures and increased their learning outcome. They also perceived that the use of VR technology increased their understanding of the location of anatomical structures. 4) Conclusion: The combination of drawing and VR technology may be of benefit to OR Nursing students when learning anatomy by both increasing student activity and learning outcomes.

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990 – 0.999). The determination coefficients (R2) suggested that only 30-35% of the actual age results could be explained by the pulp/tooth ratio. Smallest differences were observed with Cameriere's formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (-12.1 years) populations. (4) Conclusions: The equations employed allowed for estimating the age of a Brazilian subpopulation and showed little agreement between the actual age and the estimated age.

The article presents a hybrid method for calculating the chemical composition of steel with the required hardness after cooling from the austenitizing temperature. Artificial neural networks and genetic algorithms were used to develop the model. Based on 550 diagrams of continuous cooling transformation (CCT) of structural steels available in the literature, a dataset of experimental data was created. Artificial neural networks were used to develop a hardness model describing the relationship between the chemical composition of the steel, the austenitizing temperature, and the hardness of the steel after cooling. A genetic algorithm was used to identify the chemical composition of the steel with the required hardness. The value of the objective function was calculated using the neural network model. The developed method for identifying the chemical composition was implemented in a computer application. Examples of calculations of mass concentrations of steel elements with the required hardness after cooling from the austenitizing temperature are presented. The model proposed in this study can be a valuable tool to support chemical composition design by reducing the number of experiments and minimizing research costs.