Background: The purpose of this study was to ascertain the reliability of two 15-sec sprint cycling tests in men and women to estimate the maximum rate of glycolysis or lactate production (VLa-Max). Methods: Eighteen men and twelve women completed two sprint sessions over 1-week. A 10-min warm-up preceded a 3 µl blood lactate (BLC) sample, after which a 15-sec sprint was completed; cyclists then rested passively while multiple lactate samples were taken until levels peaked. VLaMax was calculated as (Peak BLC – Pre BLC) * (15-sec – Talac)-1. Trial differences and reliability across trials were analyzed using a paired-sample t-test, Pearson correlation, ICC, and Bland-Altman analysis with α=0.05 for all tests; data are reported as mean ± sd. Results: Power (W) was similar across trails (773.0 ±143.5 vs. 758.2 ± 127.4; p = 0.333) and coefficient of varia-tion (CV) of 4.7%. VLaMax was similar (0.673 ± 0.024 vs 0.635 ± 0.237; p = 0.280), but only moder-ately reliably across trials with a CV, ICC, and R value of 18.6%, 0.661, and 0.67, respectively. Conclusions: A 15-sec VLaMax cycling sprint is moderately reliable being affected both by the lac-tate measurement and other variables used in the calculation. More research may offer ways to improve reliability.

We demonstrate the use of a nanotechnology-based approach for the investigation of enzymatic activity of a single molecule of horseradish peroxidase with a solid-state nanopore. The artificial 5 nm solid-state nanopore has been formed in a 40-nm-thick silicon nitride structure. Single molecule of HRP has been entrapped into the nanopore. The activity of horseradish peroxidase (HRP) enzyme molecule inserted in the nanopore has been monitored by recording the time dependence of the ion current through the nanopore in the course of the reaction of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) oxidation reaction. We have found that in the process of ABTS oxidation in the presence of 2.5 mM hydrogen peroxide, individual HRP enzyme molecules are able to retain activity for approximately 700 seconds before a decrease in the ion current through the nanopore, which can be explained by structural changes of the enzyme.

Process model discovery covers different methodologies to mine a process model from traces of process executions, and is gaining an important role in Artificial Intelligence research. Current approaches in the area, with few exceptions, focus on determining a model of the flow of actions only. However, in several contexts, (i) restricting the attention to actions is quite limitative, since the effects of such actions have to be analysed, too, and (ii) traces provide additional pieces of information, in the form of states (i.e., values of parameters possibly affected by the actions): for instance, in several medical domains traces include both actions and measurements of patients’ parameters. In this paper, we propose AS-SIM (Action-State SIM), the first approach able to mine a process model which comprehends two distinct classes of nodes, to capture both actions and states.

Purpose: To clarify the mechanism of state anxiety on intertemporal decision-making, two studies were conducted to investigate the role of trait anxiety and inhibitory control. Study 1 examined the moderating effect of trait anxiety. Study 2 continued to investigate the mediating effect of inhibition control on the basis of study 1. Methods: A total of 266 Chinese college students participated. Participants’ state anxiety, trait anxiety and intertemporal decision-making were measured by questionnaires (scales) respectively. And inhibition control was evaluated by two-choice oddball paradigm. Results: The results of Study 1 indicated that state anxiety could predict intertemporal decision-making and that the moderating effect of trait anxiety on this relationship was significant. Study 2 found that inhibitory control could completely moderate the relationship between state anxiety and intertemporal decision-making and that this indirect effect was affected by trait anxiety. Conclusion: 1)Individuals with higher trait anxiety are more inclined to make more impulsive and intertemporal decisions when they have a high level of state anxiety; 2)state anxiety allows inhibitory control ability to have a further effect on intertemporal decision-making; and 3)the higher trait anxiety in individuals, the stronger mediating effect of inhibitory control on the relationship between state anxiety and intertemporal decision-making.

Abstract. Background: COVID-19's first victim was announced by Chinese health authorities on the 11th of January 2020. On January 13, the first official case was reported outside China, in Thailand. On January 25, the same occurred in São Paulo and on March 8, the first case was recorded in Minas Gerais. From that point onwards until the 3rd of October 2020, a total of 370,911 cases and 9,204 deaths were recorded in the state. This study aims to investigate spatiotemporal patterns of COVID-19 with incidence from March 22 to October 3 of 2020. Methods: The database itself was obtained from Health Division of Minas Gerais state. The vulnerability index was calculated using a principal component analysis. Moran's I autocorrelation was tested, z-score and P-value < 0.05. Results: From March 22 to October 3 of 2020 the incidence level varied from 45.680/100,000 to 312.130/100,000. The most influential variables were: illiteracy, gross domestic product and breath apparel per municipality. The clusters were concentrated in the metropolitan area of Belo Horizonte, Zona da Mata and Triangulo Mineiro. Conclusion: The spatial distribution of COVID-19 from week 13 until week 40 showed that different levels of endemicity and mesoregional vulnerabilities were represented in these maps.

Multicellular organisms organize themselves according to two principles; first, the equilibrium between the driving force of unstable state cells and apoptosis or senescence; and second, the mutual equilibrium between the functional requirements of different types of cells. For the first principle, we deduce that stem cells at different levels have their own growth limits, which are determined by two factors: the ability of the stem cells to enter an unstable state (specifically, the ability of cells to divide and differentiate); and the rate of cellular senescence, loss of function, and finally, apoptosis. The superposition of stem cell limits at different levels over each other can amplify small differences at the genetic level. Moreover, the growth limits of different organs are different, which lead to different individuals having completely different appearances. The second principle is that the sum of the specific output functions of an organ must be equal to the overall demand for the function to be provided by the organ. If negative entropy input can meet this equilibrium, defects in certain genes will cause these defective individuals to become larger or develop other morphology.

If a subject learns about the properties of an alternative under a high state of food deprivation, it will prefer this alternative over a similar one in a later choice test, although the subject is currently under a relative state of satiety. In this experiment, we probe this effect in a delay-discounting task, where the reward of the experienced alternative is progressively delayed. Eight male Wistar rats were trained to respond to an alternative under a high state of deprivation and eight rats under a relative state of satiety. After 20 sessions, their weight was recalibrated to a state of relative satiety. Then, they were exposed to a delay-discounting task where the long-larger alternative was the one used during training. The group that experienced the alternative under a higher level of food deprivation preferred more this alternative, and its preference stayed across time. On the contrary, the group that experienced the alternative under a lower level of food deprivation systematically preferred the small-shorter alternative. Our results support that the reinforcement value may be sensitive to the organism's state at the moment an alternative is experienced for the first time.

Background: The first few minutes after birth are the most dangerous for the survival of an infant. Babies in neonatal intensive care units are either under heated or overheated, and hypothermic infants remain hypothermic or develop a fever. As a result, special attention must be paid to monitoring and maintaining the time of recovery from hypothermia states. Despite numerous studies, only a few have examined the transition from neonatal hypothermia and associated risk factors in depth. Method: A retrospective observational study was conducted to track axillary temperatures taken at the time of neonatal intensive care unit admission, which were then tracked every 30 minutes until the newborn's temperature stabilized. All hypothermic neonates admitted to the neonatal intensive care unit between January 2018 and December 2020 was included in the study. Temperature data were available at birth and within the first three hours of admission for 391 eligible hypothermic neonates. The effect of factors on the transition rate in different states of hypothermia was estimated using a multi-state Markov model. Result: The likelihood of progressing from mild to severe hypothermia was 5%, while the likelihood of progressing to normal was 34%. The average time spent in a severe hypothermia state was 48, 35, and 24 minutes for three different levels of birth weight, and 53, 41, and 31 minutes for low, moderate, and normal Apgar scores, respectively. Furthermore, the mean sojourn time in a severe hypothermia state was 48, 39, and 31 minutes for three different levels of high, normal, and low pulse rate, respectively. Conclusion: For hypothermic survivors within the first three hours of life, very low birth weight, low Apgar, and high pulse rate had the strongest association with hypothermia and took the longest time to improve/recover. As a result, there is an urgent need to train all levels of staff dealing with maintaining the time of recovery from neonatal hypothermia.

Liquid-liquid phase separation (LLPS) of proteins has been found ubiquitously in eukaryotic cells, critical in the controlling of many biological processes through forming a temporary condensed phase with different bimolecular components. TDP-43 is recruited to stress granules in cells and is the main component of TDP-43 granules and proteinaceous amyloid inclusions in patients with amyotrophic lateral sclerosis (ALS). TDP-43 low complexity domain (LCD) is able to demix in solution forming the protein condensed droplets. The molecular interactions regulating its LLPS were investigated at the protein fusion equilibrium stage, where the droplets stopped growing. We found the molecules in the droplet were still liquid-like but with enhanced intermolecular helix-helix interaction in the LCD. The protein would start to aggregate after about 200 minutes of lag time and aggregate slower than at the condition when the protein does not phase separate or the molecules have a reduced intermolecular helical interaction. A structural transition intermediate towards protein aggregation was also discovered involving a decrease of the intermolecular helix-helix interaction and a reduction in the helicity. Therefore, LLPS and the intermolecular helical interaction could help maintain the stability of TDP-43 LCD.

The measurements of the proton electromagnetic form factors in the time-like region using the initial state radiation technique are reviewed. Recent experimental studies have shown that initial state radiation processes at high luminosity electron-positron colliders can be effectively used to probe the electromagnetic structure of hadrons. The BABAR experiment at the B-factory PEP-II in Stanford and the BESIII experiment at the $\tau$-charm factory BEPC-II in Beijing have measured the time-like form factors of the proton using the initial state radiation process $e^{+}e^{-}\to pbar{p}\gamma$. The two kinematical regions where the photon is emitted from the initial state at small and large polar angles have been investigated. In the first case the photon is in the region not covered by the detector acceptance and is not detected. The Born cross section and the proton effective form factor have been measured over a wide and continuous range of the the momentum transfer squared $q^2$ from threshold up to ~42 (GeV/c)$^2$. The ratio of electric and magnetic form factors of the proton has been also determined. In this report, the theoretical aspect and the experimental studies of the initial state radiation process $e^{+}e^{-}\to p\bar{p}\gamma$ are described. The measurements of the Born cross section and the proton form factors obtained in these analyses near the threshold region and in the relatively large $q^2$ region are examined. The experimental results are compared to the predictions from theory and models. Their impact on our understanding of the nucleon structure is discussed.

This paper reports applying Minimax principle and impulsive differential inequality to derive the existence of multiple stationary solutions and the global stability of a positive stationary solution for a delayed feedback Gilpin-Ayala competition model with impulsive disturbance. The conclusion obtained in this paper reduces the conservatism of the algorithm compared with the known literature, for the impulsive disturbance is not limited to impulsive control.

In this paper, a 3 DOF gyrscope position control have been designed and controlled using optimal control theory. An input torque has been given to the first axis and the angular position of the second axis have been analyzed while the third axis are kept free from rotation. The system mathematical model is controllable and observable. Linear Quadratic Integral (LQI) and Linear Quadratic State Feedback Regulator (LQRY) controllers have been used to improve the performance of the system. Comparison of the system with the proposed controllers for tracking a desired step and random angular position have been done using Matlab/Simulink Toolbox and a promising results has been analyzed.

The purpose of this paper is to simulate a two-dimensional Rayleigh-Taylor instability problem using the classical method of Finite Element analysis of a multiphase model using ANSYS FLUENT 19.2. The governing equations consist of a system of coupled nonlinear partial differential equations for conservation of mass, momentum and phase transport equations. The study focuses on the transient state simulation of Rayleigh Taylor waves and subsequent turbulent mixing in the two phases incorporated in the model. The Rayleigh Taylor instability is an instability of an interface between two fluids of different densities which occurs when the lighter fluid is pushing the heavier fluid in a gravitational field. The problem was governed by the Navier-Stokes and Cahn-Hilliard equations in a primitive variable formulation. The Cahn- Hilliard equations were used to capture the interface between two fluids systems. The objective of this article is to perform grid dependency test on Rayleigh Taylor Instability for 2 different mesh size and compare the results for the variation in Atwood Number. The results were validated with the observations from previous published literatures.

Study background and aims: Laparoscopic cholecystectomy is one of the most frequently performed interventions in departments of general surgery. One of the most important aims in achieving perioperative stability of these patients is diminishing the impact of general anesthesia on the hemodynamic stability and the optimization of anesthetic drug doses based on the individual clinical profile of each patient. The objective of this study is the evaluation of the impact monitoring the depth of anesthesia through Entropy (state entropy – SE and response entropy -RE) has on the hemodynamic stability and on the doses of volatile anesthetic. Material and Methods: This is a prospective, observational, randomized, monocentric study carried out between January 2019 and December 2019 in the Clinic of Anesthesia and Intensive Care from the “Pius Brînzeu” Emergency County Hospital in Timișoara, Romania. The patients included in the study were divided in two study groups; patients in Group A (target group) received multimodal monitoring that included monitoring of standard parameters and of Entropy (SE and RE), while patients in Group B (control group) only received standard monitoring. Anesthetic dose in group A were optimized to achieve a target entropy of 40-60. Results: 68 patients met the inclusion criteria and were allocated to one of the two study groups, Group A (N=43) and Group B (N=25). There were no statistically significant differences identified between the two groups for both demographical and clinical data (p>0.05). Statistically significant differences have been identified for the number of hypotensive episodes (p = 0.011, 95% CI 0.1851 to 0.7042) and for the number of episodes of bradycardia (p < 0.0001, 95% CI 0.3296 to 0.7923). Moreover, there was a significant difference in the Sevoflurane consumption between the two study groups (p = 0.0498, 95% CI -0.3942 to 0.9047). Conclusions: The implementation of the multimodal monitoring protocol that includes the standard parameters and the measurement of Entropy for determining the depth of anesthesia (SE and RE) lead to a considerable improvement in perioperative hemodynamic stability. Optimizing the doses of anesthetic drugs based on the individual clinical profile of each patient leads to a considerable decrease in drug consumption as well as to a lower incidence of hemodynamic side-effects.

Merchant marine fleet is under inspections by several parties to ensure maritime regulation compliance. One of the major effects on implementation of regulations by International Maritime Organization (IMO) is indeed Port State Control. This article aims to analyze Paris Memoranda of Understanding (MOU) all detention remarks from 2013 to 2019 for EU15 countries (except Luxemburg and Austria) through an approach based on Analytical Hierarchy Process and demonstrate the results on Geographic Information System (GIS) to guide marine industry on detainable Port State Control remarks and country risk profile. While Analytical Hierarchy Process Approach has been used to indicate the ranking of basic maritime regulations from the perspective of the port state control , GIS help us to demonstrate the regional dispersion amongst EU15. The data of the detained vessel taken from the public website of Paris MOU and each report considered as a professional judgement that causes detention. It has been shown that almost all countries top priorities for regulation are Safety of Life at Sea (SOLAS) and Fire Safety Systems (FSS). Consequently, the results of the study can assist Port State Officers, ship crew, ship owners and managers presenting the facts of their inspection and able to improve themselves. The spatial analysis also expected to guide ship owners and managers to focus their vessel’s deficiencies to prevent sub-standardization.

Limnologists often adhere to a discretized view of waterbodies—they classify them, divide them into zones, promote discrete management targets, and use research tools, experimental designs, and statistical analyses focused on discretization. This approach to limnology has profoundly benefited the way we understand, manage, and communicate about waterbodies. But the research questions and the research tools in limnology are changing rapidly with consequences for the relevance of our current discretization schemes. Here, I examine how and why we discretize and argue that selectively rethinking the extent to which we must discretize gives us an exceptional chance to advance limnology in new ways.

In order to ensure the sustainability of the shipping industry and marine ecosystem of Montenegro, it is necessary that Montenegro becomes a full member of the Paris Memorandum of Understanding (Paris MoU) on Port State Control. The reasons for doing so are numerous: the full adoption of standards stipulated by the Memorandum in relation to ship control; continuous keeping the pace with and development of new standards in compliance with turbulent changes in the maritime industry and operation (including the increasing scope of maritime transport); decrease in the number of detained ships which meet the requirements stipulated in international conventions and elimination of substandard ships in perspective; prevention of environmental pollution, sea and port incidents. This justified endeavour is supported by the fact that Montenegro is one out of two countries in Europe that are not the full members of the Paris MoU. Additionally, in this context it is necessary to emphasise the fact that the marine ecosystem of Montenegro makes an integral part of the world ocean. Accordingly, the improvement of the quality of national legislation which is compliant with international requirements is an imperative which has positive implications on the regional and global sustainability.

The chiral optical Tamm state (COTS) is a special localized state at the interface of a handedness-preserving mirror and a structurally chiral medium such as a cholesteric liquid crystal or a chiral sculptured thin film. The spectral behavior of COTS, observed as reflection resonances, is described by the temporal coupled-mode theory. Mode coupling is different for two circular light polarizations because COTS has a helix structure replicating that of the cholesteric. The mode coupling for co-handed circularly polarized light exponentially attenuates with the cholesteric layer thickness since the COTS frequency falls into the stop band. Cross-handed circularly polarized light freely goes through the cholesteric layer and can excite COTS when reflected from the handedness-preserving mirror. The coupling in this case is proportional to anisotropy of the cholesteric and theoretically it is only anisotropy of magnetic permittivity that can ultimately cancel this coupling. These two couplings being equal results in a polarization crossover (the Kopp--Genack effect) for which a linear polarization is optimal to excite COTS. The corresponding cholesteric thickness and scattering matrix for COTS are generally described by simple expressions.

Measurements of complex magnetic permeability, μ(f,H)=μ′(f,H)-iμ″(f,H) and dielectric permittivity ε(f,H)=ε′(f,H)-iε″(f,H), in the frequency range, f of (0.4-7) GHz, and polarizing field, H of (0–135) kA/m, were performed, for a kerosene-based ferrofluid with magnetite nanoparticles. Based on these measurements, the phenomenon of ferromagnetic resonance was highlighted and some microwave propagation parameters of the ferrofluid were determined: the attenuation constant, α(f,H), and the reflection coefficient, R(f,H), at the air-material interface. Knowing these parameters we proposed a theoretical model establishing for the first time a new equation that allows the calculation of the overall reflection coefficient, Rw(f,H), of a ferrofluid with thickness d, deposited on a totally reflective support, following multiple internal reflections of the electromagnetic wave in the material. The results show that by increasing both, H, and d, the parameter, Rw(f,H) presents a minimum that decreases from 0.90 (for d=2mm) to 0.64 (for d=10 mm), at frequency f=5 GHz, which indicates an increase in the absorption of the electromagnetic wave by the ferrofluid. The obtained results are useful in the study of some materials that could be used as electromagnetic absorbers in the microwave range, by the determination of the overall reflection coefficient, Rw(f,H), controlled both by the thickness, d , of the absorber and by the external applied field, H.

The recent global calamity of sea level rise and flooding is a major disaster. Some settlements on Java Island, Indonesia, have been reported to be sinking. Bedono Village is one village on the Central Java Coast that is vulnerable to sea level rise. Aside from the possibility of sea level rise, the calamity in this village is linked to prior mangrove degradation and fish pond expansion. This tragedy has displaced 78.63% of the population over a decade, and the remaining population is still surviving in the remaining lands. This study aims to investigate the effects of sea-level rise-related permanent inundation on the lives of the remaining residents in Bedono Village, with a focus on their adaptation and resilience methods. The results disclosed that remaining populations have taken active initiation by adopting multiple strategies that include structural prevention measures and nature based solution through mangrove reforestations. As a result based on mangrove assessment using Geographic Information Systems, mangrove cover increased from 1 ha in 2010 to 9.5 ha in 2012. This achievement has provided an alternative income through mangrove ecotourism. Women and multi stakeholder participation have also contributed to the implementation of adaptation strategy. Despite those significant achievements, the adaptation and resilience was challenged by lack of education and awareness towards sea level rise issues and their confounding disasters. The nature-based solution and local wisdom in Bedono Village is an example that is in line with GPDRR UNDRR 2022, the Sendai Framework, and The Bali Agenda for Resilience that ensures a whole-of-society approach to sea-level rise by ensuring that no one is left behind, creating an inclusive environment, and promoting gender.

Immune reconstitution inflammatory syndrome (IRIS) presents as an exaggerated immune reaction that occurs during dysregulated immune restoration in immunocompromised patients in late-stage HIV infection who commenced antiretroviral treatments. Virtually, any opportunistic pathogen can provoke this type of immune restoration disorders. In this review, we focus on recent development in the identification of risk factors for Cryptococcal IRIS and on advancements in our understanding of C-IRIS immunopathogenesis. We overview new findings in blood and cerebrospinal fluid which can potentially be useful in the diagnosis of cryptococcal meningitis IRIS. We assess the utility of these biomarkers to identify putative host-based targets, which may justify a clinical need for improvement in monitoring a patient’s laboratory results and adjusting treatment modalities in AIDS patients co-infected with Cryptococcus.

In this article we present a SCILAB implementation of algebraic iterative reconstruction methods for discretisation of inverse problems in imaging. These so-called row action methods rely on semi-convergence for achieving the necessary regularisation of the problem. We implement this method using SCILAB and provide a few simplified test problems: medical tomography, seismic tomography and walnut tomography.Numerical results show the capability of this method for the original and perturbed right-hand side vector.

STUDY QUESTION: Which are the main research interests among patients of assisted reproductive technologies (ART)? SUMMARY ANSWER: Patients identified as research priorities that deserve further investigation: success rates and risks of ART, side-effects of treatments, resources to cope with infertility, effectiveness of alternative therapies, lifestyle habits to protect fertility, oocyte quality and ovarian reserve, and causes of genetic or hereditary infertility. WHAT IS KNOWN ALREADY: The involvement of patients and caregivers in setting research agendas in medicine has gathered significant momentum in the last decade. Patients’ involvement in setting research priorities offers several benefits: improved patient knowledge and awareness of their condition; greater understanding of the medical professionals of the impact of the condition on patients’ quality of life; reduced costs associated with redundant research activities. This is may be also applicable to research in infertility and ART, where patients’ interests have never been explored before. STUDY DESIGN, SIZE, DURATION: This is a cross-sectional study that consists of an anonymous online survey, which was sent up to three times to 2112 patients from 11 fertility centers in 5 countries between January-December 2018. The study design was based on the James Lind Alliance priority setting partnership model, which comprises the identification of patients groups, the exploration of the research agenda, the analysis of collected data and identification of priorities. PARTICIPANTS/MATERIALS, SETTING, METHODS: Overall, 2112 patients were contacted, and 945 surveys were answered (RR: 44.7%). Patients were asked to identify research questions relevant to them in the areas of infertility causes and prevention, fertility treatments (medication and ART), and the emotional aspects of infertility. Answers were categorized in topics and ranked by frequency. A long list of the top-30 research topics was extracted from the aggregate results, from which, a short list of the top-10 research topics was created. At the end, 10 research questions related to each of the 10 research topics were constructed, based on the answers given by patients. MAIN RESULTS AND THE ROLE OF CHANCE: Female (845, 89.4%) and male (100, 10.6%) patients were included. The mean age of patients was 37.8 (SD 1.74). Most of the patients did not have children at the time of the survey (523, 59%), while 51 (5.7%) were pregnant. Sixty (6.3%) patients did not start treatment, 579 (61.3%) were performing a treatment with their own gametes and 304 (32.2%) were treated through gamete donation. Patients were mainly interested in the effectiveness of ART -especially per clinical profile-, side effects of drugs, protection of fertility and prevention of infertility –especially through diet and exercise-, and psychological aspects of the infertility journey. The top-10 research questions (and weight) obtained were: 1) What are the side-effects of ART treatments? (41.6%); 2) What are the most effective methods to cope with infertility from the psychological point of view? (37.2%); 3) What effects could diet have on fertility? (25.9%); 4) What are ART success rates per clinical profile? (25.9%); 5) Are there habits and lifestyle factors that could prevent infertility? (20.0%); 6) What are the long-term risks associated to ART? (18.5%); 7) Are alternative therapies such as acupuncture, yoga, and meditation effective to treat/prevent infertility? (18.5%); 8) What is the impact of exercise on fertility? (15.4%); 9) How does oocytes quantity and quality affect fertility? (9.5%); 10) What are the genetic patterns or hereditary conditions causing/related to infertility? (9.5%). LIMITATIONS, REASONS FOR CAUTION: Although all respondents had attended a fertility center, not all of them were diagnosed as infertile (i.e. single women) and had started treatment at the time of response, while a few were pregnant; their priorities for research might have been influenced by their infertility journey. Also, all participants attended private fertility centers: areas of interest may be different in public settings. WIDER IMPLICATIONS FOR THE FINDINGS: Researchers and clinicians should keep in mind that, in addition to improvement of treatments’ success rates and side-effects, patients greatly value research on causes, prevention and emotional aspects of infertility. As their views might differ from those of medical professionals, patients’ voices should be incorporated in setting infertility research priorities.

The purpose of this article is to present the COVID-19 pandemic disruptions occurring in the supply chain of automotive companies, taking into account the type of business. The specific objectives are: to identify and characterise the types of enterprises operating in automotive supply chains, to identify changes during the pandemic in automotive enterprises, depending on the type of activity, to show disruptions in automotive supply chains and ways to counteract these disadvantages depending on the type of activity. Automotive enterprises operating in Poland were selected for the study purposefully. A random selection method was used to select 500 automotive companies for the study. The data sources were surveys conducted in June 2023 among 500 enterprises in the form of a face-to-face telephone interview. Automotive companies experienced supply chain disruptions, regardless of the type of business. Most often, these were caused by lockdowns and official closures, low stocks of materials and products, and problems with employees. There was no difference by type of business. Disruptions were most often short-lived, up to 1 year. Companies countered disruptions by using mostly operational measures, which were short-lived. Only a small percentage of operators made strategic decisions and countered disruptions over a longer period. The scale of these actions was greater among manufacturers than among dealers and car service companies.

In this work, we report on the first attempt using size-controlled ZnO nanoparticles (NPs) to analyze role of thioacetamide (TAA) in forming ZnS nanostructures from ZnO. The size-controlled B(blue)_, G(green)_, Y(yellow)_ZnO QDs, and NC (nanocrystalline)_ZnO NPs were synthesized by sol-gel process as well as hydrothermal method, respectively and then reacted with an ethanolic TAA solution as sulfur source. After reacting with TAA, the formation of ZnS QDs was observed over time. The chemical reactions were identified using X-ray diffraction (XRD), Transmission Electron Microscope (TEM), UV-vis spectroscopy, and Photoluminescence (PL). All results indicate that ZnS formation is due to direct crystal growth and/or chemical conversion of ZnO to ZnS. Our results enable a broader understanding of the synthetic mechanisms involved in the use of TAA as a sulfur source in forming ZnS nanostructures from ZnO.

Abstract Aim of the study: Presentation of ophthalmic symptoms of Cerebral Autosomal Dominant Arteriopathy with Subcortical Infracts and Leucoencephalopathy (CADASIL). Material and methods: Clinical presentation of female patient with diagnosed CADASIL, manifested by transient loss of vision, migraine, convergence insufficiency, diplopia, increased deep tendon reflexes of upper left limb, subcortical infarcts, mood disturbances and dementia. Results: Confirmed NOTCH3 gene mutation (p.Cys212Gly), and presence of granular osmiophilic material (GOM) in cutaneous small vessel wall in immunohistochemistry laboratory test (IHC). Magnetic resonance imaging (MRI) revealed bilateral focal vasogenic lesions in white matter of cerebral hemisphere with single micro-focal infarct in the left external capsule. Furthermore, a left eye exophoria, a bilateral peripheral visual field loss of 20 degrees and a loss of nasolabial fold was confirmed during ophthalmic tests. An eye fundus examination as well as a fluorescein angiography (FA) revealed vessel constriction of retinal arteries and a peripheral retinal pigment epithelium (RPE) atrophy with focal drusen in the left eye. The doppler ultrasonography (USG) confirmed a decreased blood flow and an increased vascular resistance of the extraocular vessels. The pattern electroretinogram (PERG) revealed a reduced P50 wave amplitude in the patient’s left eye. Conclusions: intermittent blindness, migraine, convergence failure, diplopia with specific MRI signs, NOTCH3 mutation, and the presence of GOM in the skin of small blood vessels in a young or middle-aged patient suggests CADASIL. New observations include: atrophic changes in the RPE, hemodynamic disturbances in blood flow in the short posterior ciliary arteries and in the central retinal artery, single drusen in the retina, and a reduced amplitude of the P50 wave in PERG.

Background: Continuous subcutaneous apomorphine infusion (CSAI), levodopa-carbidopa intestinal gel infusion (LCIG), and deep brain stimulation of the subthalamic nucleus (STN-DBS) have markedly changed the treatment landscape of advanced Parkinson’s disease (aPD). Despite a similar outcome of all device-aided therapies (DATs), some patients switch or combine DATs. The aim of this retrospective study was to explore the frequency and reasons for switching between or combining DATs in two movement disorders centres in Slovenia and Israel. Methods: We collected and analysed demographic and clinical data from aPD patients who switched between or combined DATs. Motor and non-motor reasons and their frequency for switching/combining were examined, as was the effect of DAT using the Global Improvement subscale of the Clinical Global Impression Scale. Non-parametric tests were used to analyse the data. Results: Of 505 aPD patients treated with DATs at both centres between January 2009 and June 2021, we identified in total 30 patients (6%), who either switched DAT (N=24: 7 LCIG-to-STN-DBS, 1 LCIG-to-CSAI, 5 CSAI-to STN-DBS, 8 CSAI-to-LCIG, 1 STN-DBS-to-LCIG, 1 LCIG-to-CSAI-to-STN-DBS, and 1 STN-DBS-to-CSAI-to-LCIG) or combined DATs (N=6: 5 STN-DBS+LCIG and 1 STN-DBS+CSAI-to-STN-DBS+LCIG). In most of these patients, inadequate control of motor symptoms was the main reason for switching or combining DATs, but non-motor reasons (related to the disease and/or DAT) were also identified. Conclusions: Switching between and combining DATs is uncommon, but in some patients brings substantial clinical improvement and should be considered in those who have either inadequate symptom control on DAT treatment or have developed DAT related complications.

The extended finite element method (XFEM) is now widely used in crack simulations and the direction of propagation of the XFEM crack in SS-304 has been quite interesting. This paper discusses the direction,θ(+ve in anti-clockwise direction), of the XFEM crack (under mode-I) propagation based on the von Mises stress-field around the crack-tip for static loading under the light water reactors (LWRs) conditions. The Mises core region from the crack-tip is chosen for β=〖90〗^o, the angle between the load and the initial crack. Experimental data for LWRs’environment is obtained and the simulations have been carried out applying three different static loads and results for the direction of the crack are calculated by measuring the stress-field around the crack-tip. It has been found that the direction of the XFEM varies inversely as the stress-field around the crack tip is increased. The computational results have been compared with the numerical results based on the minimum strain energy density criterion[S-criterion].

Origins of the time, mass, electric charges and magnetic monopoles are explained. The energies, electric charges and magnetic charges of the particles are defined as E = cDtDV and |q| = cDt = E/DV, and |q_m| = c²Dt, respectively, for the 3-D quantized spaces warped along the time axis direction of ct in the 4-D Euclidean space. The energy (or mass) and charges (or electric charges and magnetic charges) are the vectors along the time axis of ct in the 4-D Euclidean space. This new concept is closely connected to the wave function of the quantum mechanics. The electric charges, magnetic charges and energies have the property of the space direction independence. Magnetic monopoles (charges) are the force carrying bosons with the inside electric field time loop. Electric monopoles are the elementary fermions. Photon space fluctuations are explained with the quantized magnetic charges.

Intravitreal injections (IVTs) of corticosteroids as triamcinolone acetonide (TA) are frequently used for the treatment of many vitreous and retinal disorders. However, IVTs are related to severe ocular complications. Lately, a topical ophthalmic TA loaded liposomes formulation (TALF) was designed to transport TA into the posterior segment of the eye when instilled in the ocular surface. To evaluate the safety, tolerability, and biologic activity of TALF, an animal study and a phase I clinical assay was performed. Moreover, four patients with diabetic macular edema (DME) were treated with TALF in order to explore the biologic activity of the formulation. No inflammation, lens opacity, swelling or intraocular pressure rising were recorded after the instillation of TALF in any of the animal or clinical study. Mainly, mild and transient adverse events such as dry eye (30%) and burning (30%) were reported. TALF improves significantly visual acuity and diminishes central foveal thickness in patients with DME. The current data demonstrate the safety, tolerability, and biologic activity of TALF. It seems that TALF can be used topically to treat vitreous and retinal diseases that respond to TA such as DME, avoiding the use of corticosteroids IVTs and its associated hazards.

In this paper, we firstly consider extended degenerate central factorial numbers of the second kind and provide some properties of them. We then introduce unified degenerate central Bell polynomials and numbers and investigate many relations and formulas including summation formula, explicit formula and derivative property. Moreover, we derive several correlations for the fully degenerate central Bell polynomials associated with the degenerate Bernstein polynomials and the degenerate Bernoulli, Euler and Genocchi numbers.

In this paper, we investigate p-adic q-integral (q-Volkenborn integral) on Z_p of p-adic gamma function via their Mahler expansions. We also derived two q-Volkenborn integrals of p-adic gamma function in terms of q-Daehee polynomials and numbers and q-Daehee polynomials and numbers of the second kind. Moreover, we discover q-Volkenborn integral of the derivative of p-adic gamma function. We acquire the relationship between the p-adic gamma function and Stirling numbers of the first kind. We finally develop a novel and interesting representation for the p-adic Euler constant by means of the q-Daehee polynomials and numbers.

Helmholtz energy of ice VII-X is determined in a pressure regime extending to 450 GPa at 300 K using local basis functions in the form of b splines. The new representation for the equation of state is embedded in a physics-based inverse theory framework of parameter estimation. Selected pressures as a function of volume from 14 prior experimental studies and two theoretical studies constrain the behavior of Helmholtz energy. Separately measured bulk moduli, not used to construct the representation, are accurately replicated below about 20 GPa and above 60 GPa. In the intermediate range of pressure, the experimentally determined moduli are larger and have greater scatter than values predicted using the Helmholtz representation. Although systematic experimental error in the experimental elastic moduli is possible and likely, the alternative hypothesis is a slow relaxation time associated with changes in proton mobility or the ice VII to X transition. A correlation is observed between anomalies in the pressure derivative of the predicted bulk modulus and previously suggested higher-order phase transitions. Improved determinations of elastic properties at high pressure would allow refinement of the current equation of state. More generally, the current method of data assimilation is broadly applicable to other materials in high-pressure studies.

Earthquake-triggered landslides represent a significant seismic-related disaster, posing threats to both the lives and properties of individuals in affected areas. Furthermore, they can result in road and river blockages, as well as other secondary disasters, significantly impacting post-earthquake rescue efforts. Efficient and accurate rapid assessment of high-risk landslide zones carries important implications for decision-making in disaster response and for mitigating potential secondary disasters. This study uses the high-intensity Zone VII to IX of the 5 September 2022 Luding Ms6.8 earthquake as a case study. The "difference method" and the "cumulative displacement method," based on the simple Newmark model, are employed to assess earthquake-triggered landslides. The evaluation results from both methods demonstrate that the areas posing an ex-tremely high risk of earthquake-triggered landslides are predominantly situated on the western side of the Xianshuihe Fault. Actual landslide data verification shows that both models have high predictive accuracy, with the difference method model slightly outper-forming the cumulative displacement method model. Moreover, the study recommends determining threshold values for each landslide hazard interval with significant physical meaning using past strong earthquake data as soon as possible when utilizing the difference method to assess the risk of earthquake-triggered landslides.

The present paper reports an alternative solution of the measurement problem in quantum theory. The measurement problem can be characterized as that the U-procedure verses the R-procedure. The R-procedure is tested by the Yes/No measurement originally proposed by von Neuman and discussed in details by Penrose. We propose a novel stochastic sampling method to tackle the measurement paradox. Each testing sample produces a pair of Yes-number c and No-number d, which in turn generates a sample phase with respect to the exponential form of (c+id). All the sample phases forms a group G_R. Taking G_R as the sampling potential, combined with the dynamic phase group G_U，we establish a unified model of U-procedure and R-procedure for the evolution of wavefunction. Based on the Born rule, the probability of a sample is given by the squared magnitude of （c+id）. Some metaproperties of the new U-R model, such as natural transformation, consistency, and completeness, are presented. The present work provides a new picture of quantum mechanics and alike. The measurement problem widely exists in dynamic analysis, higher cognition, and large data modeling. Thus, the work reported here has a wide range of applications. Keywords: The measurement problem; U-R procedures; the Yes/No type measurement; stochastic sampling; sample phase; Born probability.

We introduce a new class of Vertex Operator Algebras Y+ and their duals, which generalize the standard W-algebras WN of type sl(N). These algebras can be defined in terms of junctions of boundary conditions and interfaces in the GL-twisted N = 4 Super Yang Mills gauge theory. The aim of these technical calculations is to find the relation of these ortho-symplectic Y-algebras to truncations of even W\infinity.

The present study aimed to analyze novel mechanisms underlying Nrf2-mediated anti-apoptosis in periodontal ligament stem cells (PDLSCs) in the periodontitis oxidative microenvironment. We created an oxidative stress model with H2O2-treated PDLSCs. Herein, we used real-time PCR, western blotting, TUNEL staining, fluorogenic assay and transfer genetics to confirm the degree of oxidative stress and apoptosis as well as the Nrf2 function. Surprisingly, we demonstrated that with up-regulated ROS and MDA levels, the effect of oxidative stress was obvious under H2O2 treatment. Anti-oxidative molecules were changed after the H2O2 exposure, whereby the anti-oxidative signaling of Nrf2 was activated with the increase of its downstream effectors, HO-1, NQO1 and γ-GCS. Additionally, the apoptosis levels gradually increased with oxidative stress and changes in the caspase-9, caspase-3, Bax and c-Fos levels, but not with caspase-8 and down-regulated Bcl-2. The enhanced antioxidant effect could not resist the occurrence of apoptosis. Furthermore, Nrf2 overexpression effectively improved the anti-oxidative levels and increased cell proliferation. At the same time, overexpression effectively restrained TUNEL staining and decreased the molecular levels of caspase-9, caspase-3, et al, but not that of caspase-8. By contrast, silencing the expression Nrf2 levels had the opposite effect. Collectively, Nrf2 alleviates PDLSCs via its effects on anti-oxidative and anti-intrinsic apoptosis by the activation of anti-oxidative enzymes.

Recently, there has been, on the one hand, an increase in the complexity of digital device designs and, on the other hand, an increase in the requirements for the development time and the reliability of the designs. One of the directions of solving this problem is developing new techniques for designing digital devices.This paper proposes a new technique for designing digital devices based on finite state machines with datapath (FSMD), when the functioning of the device is described in the form of an algorithm state machine with datapath (ASMD) charts. The new technique is called ASMD-FSMD. Different digital device design techniques are compared to each other using design examples of a synchronous multiplier on field programmable gate array (FPGA). The efficiency of the ASMD-FSMD technique compared to the traditional approach in terms of area and performance was investigated. The ASMD-FSMD technique, compared to the traditional one, reduces the area from 28.6% to 39.7% and increases the speed for some designs to 17.6%. In addition, using the ASMD-FSMD technique significantly reduces design time and increases design reliability. In conclusion, recommendations for using the ASMD-FSMD technique are made.

The Internet-of-Things (IoT) enables enterprises to obtain profits from data but triggers data protection questions and new types of cyber risk. Cyber risk regulations for the IoT however do not exist. The IoT risk is not included in the cyber security assessment standards, hence, often not visible to cyber security experts. This is concerning, because companies integrating IoT devices and services need to perform a self-assessment of its IoT cyber security posture. The outcome of such self-assessment needs to define a current and target state, prior to creating a transformation roadmap outlining tasks to achieve the stated target state. In this article, a comparative empirical analysis is performed of multiple cyber risk assessment approaches, to define a high-level potential target state for company integrating IoT devices and/or services. Defining a high-level potential target state represent is followed by a high-level transformation roadmap, describing how company can achieve their target state, based on their current state. The transformation roadmap is used to adapt IoT risk impact assessment with a Goal-Oriented Approach and the Internet of Things Micro Mart model.

The identification of a new virus Kiparis-144 (KiparisV) in a half-fed tick I persulcatus, removed from a person in the south of the Russian Far East, determined the goal of further research - to study its role in human pathology and the characteristics of its behavior in the tick microbiome. An ELISA study of 439 blood samples from people affected by tick bites indicated a fairly frequent (up to 16.4±1.7%) encounter of people with the KiparisV virus in the territory of natural foci of the Primorsky Territory. It has been shown that this virus, when mono-infected, can cause clinical symptoms characteristic of acute respiratory diseases. During co-infection under the influence of the KiparisV, there was an increase in the activity of Borrelia spp. with the constant production of antibodies to them only of the IgM class and clinical symptoms of Lyme disease for one year (observation period). Electron microscopy of the KiparisV found in a tick removed from a patient showed a picture of the relationship of the KiparisV (up to 100 nm in size) with unknown representatives of the tick microbiome - pathogens of a viral or bacterial nature. In a comparative aspect, a similar electron microscopic picture of the interaction of the KiparisV virus with a known pathogen of viral nature, the ectromelia virus (ECTV), is presented. The importance of the electron microscopy method in describing the tick microbiome is shown. Thus, it has been established that when co-cultivated in the system the helper-virus KiparisV probably tends to use another pathogen of the tick microbiome for its reproduction, influencing its pathogenicity.

Cloth wearing seems so natural that everyone is self-deemed knowledgeable and has some expert opinions about it. However to clearly explain the physics involved, and hence to make predictions for clothing design or selection, turns out as demonstrated below to be quite challenging even for experts. Cloth is a multiphased, porous and anisotropic material system and usually in multilayers. Unlike ordinary engineering heat transfer problems, the human body acts as an internal heat source in a clothing situation, thus forming a temperature gradient between body and ambient, and the sign of this gradient often changes as the ambient temperature varies. Our body also perspires and the sweat evaporates, an effective body cooling process via phase change. To bring all the variables into analysis quickly escalates into a formidable task. This work attempts to unravel the problem from a physics perspective, focusing on several rarely noticed yet critically important mechanisms involved so as to offer a clear and accurate depiction of the principles in clothing thermal comfort.

Information geometry is a mathematical framework that analyses the structure of statistical models using concepts from differential geometry. It treats families of probability distributions as manifolds, where the parameters of each model determine the coordinate charts. By applying info-geometric tools, we can gain insights into the characteristics of these models. The approach involves characterizing the queueing system's manifold using information geometry and presenting the exponential of the information matrix. This integration of information geometry with queueing theory provides a novel perspective for analyzing the dynamics of queueing systems, incorporating relativistic and Riemannian concepts. Some applications to E-health are highlighted. Finally, closing remarks and the next phase of research.

Background: we aim to investigate attitudes toward vaccination, by analyzing empirical factors associated with vaccine acceptance in the Lazio region mpox vaccination (MpoxVax) campaign in Italy. Methods: all subjects who accessed to MpoxVax and signed the informed consent were prospectively enrolled in the MPOX-VAC Study and were asked to fill out an anonymous survey. Two endpoints were selected: ‘delayed acceptance’ and ‘early acceptance’, defined as access for vaccination &gt;60 and ≤30 days from the vaccination campaign starting (VCS), respectively. Results: over the study period 1717 individuals underwent vaccination: 129 (7%) &gt;60 [1588 (92.5%) ≤60] and 676 (60%) ≤30 days from VCS. A bisexual orientation, a lower education level and a worse perceived physical and mental health were associated with delayed access to vaccination. Being Pre-Exposure Prophylaxis (PrEP) users and, marginally, HIV positive, having a high perceived risk for mpox infection and reporting high-risk behaviors like the use of recreational drugs/chems, sex under the influence of drugs and/or alcohol and higher number of principal sexual partners, were associated with early access to vaccination. Conclusions: according to our data, risk awareness was a major determinant of early mpox vaccination acceptance. Conversely, worse perceived health status and a low educational level were critical factors associated with delayed vaccination.

The main aim of this paper is to set some correlations between Boole polynomials and p-adic gamma function in conjunction with p-adic Euler contant. We develop diverse formulas for p-adic gamma function by means of their Mahler expansion and fermionic p-adic integral on ℤ_{p}. Also, we acquire two fermionic p-adic integrals of p-adic gamma function in terms of Boole numbers and polynomials. We then provide fermionic p-adic integral of the derivative of p-adic gamma function and a representation for the p-adic Euler constant by means of the Boole polynomials. Furthermore, we investigate an explicit representation for the aforesaid constant covering Stirling numbers of the first kind.

We present a thermodynamic approach in modeling the evolution of the universe based on a theory that space consists of energy quanta, the spaceons. From wave-particle duality, they can be treated as an ideal gas. The model is similar to the Big Bang but without Inflation. It provides an insight into the nature of dark energy and dark matter, and an explanation for the accelerated expansion of the universe. The universe started from an atomic size volume of spaceons at very high temperature and pressure. Upon expansion and cooling, phase transitions occurred resulting in the formation of fundamental particles, and matter. These nucleate and grow into stars, galaxies, and clusters due to the action of gravity. From the cooling curve of the universe we constructed a thermodynamic phase diagram of cosmic composition, from which we obtained the correlation between dark energy and the energy of space. Using Friedmann’s equations, our model fits well the WMAP data on cosmic composition with an equation of state parameter, w= -0.7. The dominance of dark energy started at 7.25 x 10⁹ years, in good agreement with BOSS measurements. The expansion of space is attributed to a scalar quantum space field. Dark Matter is identified as a plasma form of matter similar to that which existed during the photon epoch, prior to recombination. The thermodynamics of expansion of the universe was adiabatic and decelerating during the first 7 billion years after the Big Bang; it accelerated thereafter. A negative pressure for Dark Energy is required to sustain the latter. This is consistent with the theory of General Relativity and the law of conservation of energy. We propose a mechanism for the acceleration as due to consolidation of matter forming Dark Energy Stars (DES) and other compact objects. The resulting reduction in gravitational potential energy feeds back energy for the expansion. Space will continue to expand and dark energy will undergo phase transition to a Bose-Einstein condensate, a superfluid form of matter. Self-gravitation can cause a bounce and start a new Big Bang. We show how the interplay of gravitational and space forces leads to a cyclic, maybe eternal, universe.

Two Iron Age settlements, Tuzusai and Taldy Bulak 2 (ca. 500 BCE to 1 CE), located in Southeastern Kazakhstan on the Talgar alluvial fan north of the Tian Shan range, have yielded a small collection of bone, antler/horn, bronze, and stone artifacts with affinity to nomadic art of the first millennium BCE. Both settlements date within the period of late Saka culture. Two pieces have decorative ornamentations with zoomorphic imagery: a small carved fragment of a with carved images of a wing and an ear and a perforated bone disk with the carving of three birds’ heads. The other artifacts include objects associated with Saka weaponry or nomadic economy such as the two antler/horn psalia (cheek pieces) and a bronze amulet. A carnelian bead will also be described as an imported object. These special finds are found on the occupation floors of mud brick houses and pit houses of settlements, not in grave or burial contexts. The objects are placed in stratigraphic sequence in the settlement sites. Then the method for placing these objects within the chronological framework of “animal-style art” is through comparisons with similar objects found throughout Eurasia—a method used in Soviet and Post-Soviet archaeology. The results show that functional and stylistic elements of the six objects indicate that the Talgar settlements were part of a larger world-system of trade and communication along the early Silk Route(s).

In recent years, transformer-based models have gained prominence in multivariate long-term time series forecasting (LTSF), demonstrating significant advancements despite facing challenges such as high computational demands, difficulty in capturing temporal dynamics, and managing long-term dependencies. The emergence of LTSF-Linear, with its straightforward linear architecture, has notably outperformed transformer-based counterparts, prompting a reevaluation of the transformer's utility in time series forecasting. In response, this paper presents an adaptation of a recent architecture termed extended LSTM (xLSTM) for LTSF. xLSTM incorporates exponential gating and a revised memory structure with higher capacity that has good potential for LTSF. Our adopted architecture for LTSF termed as xLSTMTime surpasses current approaches. We compare xLSTMTime's performance against various state-of-the-art models across multiple real-world datasets, demonstrating superior forecasting capabilities. Our findings suggest that refined recurrent architectures can offer competitive alternatives to transformer-based models in LTSF tasks, potentially redefining the landscape of time series forecasting.

The problems of modeling the human bladder and its stress-strain state under external static influence were considered. A method for identification of the anisotropic biomechanical characteristics of bladder tissue was proposed. A FEM model was created, which accepts into regard that the bladder is surrounded by fiber and affected by surrounding organs, and partially protected by pelvic bones. The model considered the presence of constant hydrostatic pressure on the walls of the bladder when it is full. It has been shown that isotropic mechanical characteristics of biological tissue can be used for studying the deformed state of a filled bladder if the filled bladder 300 ml is considered as initial non-deformed stage. This was shown by modeling and verification the effect of the external static force on the bladder. Numerical experiments were conducted based on the constructed model. To validate the results obtained, a series of natural experiments on the effect of external pressure on the bladder under ultrasound control was conducted. In the future, it is planned to use the constructed model to study rupture deformations of the bladder under the influence of static and dynamic loads.

Alleged practices of magical assault and vampirism are a recurrent feature of popular explanations of misfortune in Tuva Republic, South Siberia. Based on a field study of healing practices in an “Association of Shamans”, this article analyses rituals of countercursing one’s antagonists in a context of Russian political domination. A central purpose of this discussion is to foreground the centrality of kinds of parasitical worship and occult threat to structures of political power in – and beyond – the region of Tuva. Focusing on a “curse-scape”, which develops from the combative practices of shamans, occult specialists and office-holders, the article probes a repertoire of healing symbols in a shaman’s courtroom. It is argued that shamanic healing draws its efficacy from appropriating hunting symbols and animal spirits, which appear in Indigenous Siberian cosmologies. The analysis shows that ideas of playing with risk during countercursing rituals structure the process of symbolic resolution. The article concludes by highlighting indigenous perceptions of a “cursed” landscape as a field where the agencies of “darkness” (and their political sponsors) are confronted with an emancipating, Buddhist religious mindset.

This study aims to evaluate the financial performance of SOEs in Indonesia and compare it with private companies using financial ratio analysis and efficiency analysis approaches. Four construction sector SOEs were evaluated, and five private companies were compared using financial data from 2015 to 2022. The financial ratio analysis used the Peterson (2013) approach, while the efficiency analysis employed the data envelopment analysis (DEA) approach and the paired t-test. The study results show that the financial ratio performance of state-owned companies is relatively poor, with low profitability, critical liquidity, and a high debt ratio. Debt, as a source of capital in financing construction projects, makes companies face a greater debt risk. This study validates that SOEs have lower efficiency compared to private companies.

This scholarly article introduces the "Change Through Play: Rethinking Masculinity" program, a potential intervention designed to address gun violence in the United States by targeting its societal roots, particularly through the lens of gender socialization. The program focuses on transforming children’s, particularly young boys', perceptions of masculinity away from gun violence by influencing the types of toys they play with. By promoting non-violent play, the initiative aims to foster a future generation less inclined to engage in gun violence. This community-interactive and educational approach emphasizes the importance of evidence-based interventions that respect community values and cultural dynamics. The program employs a mixed-methods approach, combining qualitative and quantitative research to evaluate its effectiveness. The program highlights the necessity of sustained, collective action to transform the entrenched practices and beliefs that perpetuate violence, ultimately striving for a society that prioritizes peace, justice, and safety.

Utilizing lignocellulosic biosourced platforms, we synthesized novel cyanostilbene (CS) deriva-tives featuring the 3,4-dimethoxyphenyl moiety. These derivatives were investigated for their emission properties in both solution and solid states. The two simple CS derivatives exhibit very weak luminescence in solution but significant luminescence in the solid state, indicating distinct Aggregation-Induced Emission (AIE) characteristic. Furthermore, combining these two CS units, without conjugation and with quasi perpendicular orientation, results in Dual-State Emission (DSE) fluorophore showing luminescence both in solution and solid states. X-ray crys-tallography studies on the solid-state compounds reveal a structure-emission relationship, demonstrating that the colour emission correlates with the conformations adopted by the mol-ecules in the solid state, which influence the type of stacking.

This research assessed the level of peer influences among the students of Ebonyi State University, Abakaliki and the existing policy framework in the University to control its negative impact. Objectives: To assess the knowledge, attitude and practice of peer pressure influence control among the students of the institution. Methodology: We used a cross-sectional design, a structured questionnaire of a five-point Likert scale as a veritable instrument for collecting the data from 30 student respondents. The questionnaire was made up of four key sections comprising student’s demographic parameters, knowledge, attitude and practice of students on the subject matter. Data collected was analyzed in a table of descriptive statistics to determine the total, range, mean and median, which were used to ascertain students’ level of knowledge, attitude, practice and countermeasures to overcome negative peer influences emanating from their peers. Results: The mean value outcome of knowledge of students fall between 2.7 to 3.3, the mean value for attitude of student falls between 2.4 to 3.6, while the practice of students falls between mean value 2.7 and 3.2. Most of these outcomes represents poor or weak weight factor which requires several levels of interventions. Conclusion: This study highlights the overriding importance of peer pressure management among the students of Ebonyi State University, Abakaliki to create a safe academic environment and guarantee higher academic performances. This research recommended that the University management should commission research on peer pressure among students, the causes, manifestations and possible remedies to enable them to develop a comprehensive framework for the University.

African scientific research faces formidable challenges, particularly with limited access to state-of-the-art measurement instruments. The high cost associated with these devices presents a significant barrier for regional research laboratories, impeding their ability to conduct sophisticated experiments and gather precise data. This predicament not only hampers the individual laboratories but also has broader implications for the African scientific community and the advancement of knowledge in developing nations—the financial cost barrier considerably impacts the research quality of these laboratories. Reflection on technical and economical solutions needs to be quickly found to help these countries advance their research. In civil Engineering, the thermal conductivity property is the most important measurement for characterising heat transfer in construction materials. Existing devices (i.e., conductometers) in a laboratory are expensive (approximately 30,000 euros) and unavailable for some African laboratories. The study proposes a new and affordable device to evaluate thermal conductivity in construction materials. The method involves establishing a thermal flux between a heat source ( from the Joule effect provided by steel wool where a current is circulating) and a cold source (generated by ice cube) under steady-state conditions. The development of the cylindrical prototype is based on the comparative flux-meter method outlined in the measuring protocol of the ASTM E1225 standard document. Experiments were conducted on four distinct materials (polystyrene, wood, agglomerated wood, and rigid foam). The results indicate a correct correlation between the experimental values obtained from the newly developed prototype and the reference values found in the literature. For example, concerning the experimental polystyrene study, the detailed case analysis reveals a good correlation, with a deviation of only 4%. The percent error found falls within the acceptable range indicated by the standards recommendations of the ASTM E1225 standard, i.e., within 5% acceptable error.

In this paper, a proof similar to the Pusey-Barrett-Rudolph (PBR) theorem is given to prove that time in quantum theory is not epistemic but has ontological reality. For this, we first discuss how time can be encoded as an intrinsic property of a quantum system. We prepare a quantum state containing time as an intrinsic property and show by a PBR-type proof that time cannot be an epistemic notion. In fact, the PBR theorem implies an ontic notion of time. Indeed, if the quantum state is a physical property, then quantum state reduction is a physical process involving information destruction. In this case, quantum probabilities are intrinsic probabilities without epistemic origin, and they generate a genuinely new sequence of events. This novelty introduced by quantum probabilities can be interpreted as time.

2023 was the hottest year ever recorded, global warming accelerates its rising, we witness a series of extreme weather events, more frequent and more intense, climate refugees, infrastructure harmed, forests burning, “meteorological tsunamis”. We failed to meet the main goals of the Kyoto protocol; we are very close to fail in meeting the Paris agreement’s slowing global warming goal. Greenhouse gases emissions are at rise and, even if completely halt, temperatures would keep rising, enhancing the global average. Carbon capture and storage technologies are being developed to counterbalance these emissions by removing such gases from the atmosphere and physically storing or transforming them into useful molecules for the society. In this work we prospect microorganisms that can serve as a platform for developing carbon capture technologies. We process samples from the seabed of Brainsfield Strait region, Antarctica, prospecting for an organism capable of fixing carbon dioxide without light (chemoautotrophic bacterias) and capable of enduring extreme conditions of pressure (100 bar) under 100% supercritical state carbon dioxide atmosphere (scCO2), conditions like those found in oil deposits, where the technology can be of particular use.

An inorganic solid electrolyte is the most favorable candidate for replacing flammable liquid electrolytes in lithium batteries. Lithium Lanthanum Zirconium Oxide (LLZO) is considered as a promising solid electrolyte due to its safe operating potential window (0-5V) combined with its good electrochemical stability. In this work, 250 g batches of pre-sintered Tadoped (Li7La3Zr1.6Ta0.4O12, TaLLZO) were synthesized for bulk production of dense LLZO electrolyte. A simple two-step thermal treatment process was developed. The first thermal step at 950 °C initiates nucleation of LLZO carefully controlling process parameters such as heating atmosphere, temperature and dopant concentration. In the second thermal step at 1150 °C, sintered discs were obtained as solid electrolytes, with relative densities of 96%. X-ray diffraction analysis confirmed the phase purity of the sintered TaLLZO disc, and refined data was used to calculate the lattice parameter (12.944 Å). Furthermore, the presence of the Ta dopant in the disc was confirmed through X-ray photoelectron spectroscopy (XPS) analysis. The ionic and electronic conductivity values of TaLLZO disc were 104 S cm-1 and 10-10 S cm-1, respectively. These values confirm that the prepared (Ta-LLZO) discs exhibit ionic conductivity while being electronically insulating, being suitable for use as solid electrolytes with the requisite electrical properties.

Youth is the essential entrepreneurial force for every country's social, political, and economic development. Urban youth make up about 34.27 percent of the population in Ethiopia. The youth unemployment crisis is one of the serious challenges that Ethiopia is facing nowadays, and it should be mentioned in the nation's public discourse. Therefore, the main objective of this study is to specify the socioeconomic and demographic factors that influence urban youth unemployment in the Somali Regional State, specifically in Jigjiga, Degahbour, Kebridahar, Gode, and Dollo Ado towns. Both primary and secondary data sources were employed. A multi-stage sampling technique has been used to select 385 sample respondents from the total population of the study. This study found that almost 63% of youth in the study area were unemployed, and a large number of unemployed youths live in Jigjiga and Dollo Ado Towns as compared to other city administrations. The econometric model's findings indicate that factors like gender, education level, work experience, access to credit, access to information, time applied for job vacancy, active job seeker, social network (network with clan elders, government officials, businessmen, and other friends), and residence in Jigjiga and Gode town have a significant association with the likelihood of youth unemployment in the Somali regional state. Therefore, this study recommends that the regional government and local city administration should develop effective policies and strategies to address the underlying causes of gender inequality, improving access and quality of education, supporting freshman graduates to find jobs, providing access to credit and job vacancies, ensuring fair and free job competition, and managing youth migration for job seeking.

This review provides an overview of the biotransformation of limonene and α-pinene, which are commonly found in wood residues and citrus fruit by-products, to produce high-value-added products. Essential oils derived from various plant parts contain monoterpene hydrocarbons, such as limonene and pinenes which are often considered waste due to their low sensory activity, poor water solubility, and tendency to autoxidize and polymerise. However, these terpene hydrocarbons serve as ideal starting materials for microbial transformations. Moreover, agro-industrial byproducts can be employed as nutrient and substrate sources, reducing fermentation costs, and enhancing industrial viability. Terpenes, being secondary metabolites of plants, are abundant in byproducts generated during fruit and plant processing. Microbial cells offer advantages over enzymes due to their higher stability, rapid growth rates, and genetic engineering potential. Fermentation parameters can be easily manipulated to enhance strain performance in large-scale processes. The economic advantages of biotransformation are highlighted by comparing the prices of substrates and products. For instance, R-limonene, priced at US$34/L, can be transformed into carveol, valued at around US$530/L. This review emphasises the potential of biotransformation to produce high-value products from limonene and α-pinene molecules, particularly present in wood residues and citrus fruit by-products. The utilisation of microbial transformations, along with agro-industrial byproducts, presents a promising approach to extract value from waste materials and enhance the sustainability of the antimicrobial, the fragrance and flavour industry.

Electroencephalography (EEG) is a crucial tool in cognitive neuroscience, enabling the study of neurophysiological function by measuring the brain's electrical activity. Its applications are included perception, learning, memory, language, decision-making and neural network mapping. Recently, interest has surged in extending EEG measurements to domestic environments. However, the high costs associated with traditional laboratory EEG systems have hindered accessibility for many individuals and researchers in education, research, and medicine. To tackle this, a mobile-EEG device named "DreamMachine” was developed. A more affordable alternative to both lab-based EEG systems and existing mobile-EEG devices. This system boasts 24-channels, 24-bit resolution, up to 6 hours of battery life, portability and a low price. Our open-source and open-hardware approach empowers cognitive neuroscience, especially in education, learning, and research, opening doors to more accessibility. This paper introduces the DreamMachine's design and compares it with the lab-based EEG system "asalabTM" in an eyes-open and eyes-closed experiment. The Alpha band exhibited higher power in the power spectrum during eyes-closed conditions, whereas the eyes-open condition showed increased power specifically within the Delta frequency range. Our analysis confirms that the DreamMachine accurately records brain activity, meeting the necessary standards when compared to the asalabTM system.

All-solid-state lithium batteries (ASSLBs) using argyrodite electrolyte materials have shown promise for applications in electric vehicles (EVs). However, understanding the effects of pro-cessing parameters on the ionic conductivity of these electrolytes is crucial for optimizing battery performance and manufacturing methods. This study investigates the influence of electrolyte op-erating temperature, electrolyte operating pressure, electrolyte pelletization pressure, and electro-lyte pelletizing temperature on the ionic conductivity of Li6PS5Cl0.5Br0.5 argyrodite electrolyte (AmpceraTM, D50=10 µm). A specially designed test cell is employed for the experimental meas-urements, allowing for controlled pelletization and testing within the same tooling. The results demonstrate the significant impact of the four parameters on the ionic conductivity of the argy-rodite electrolyte. The electrolyte operating temperature has a more pronounced effect than oper-ating pressure, and pelletizing temperature exerts a greater influence than pelletizing pressure. This study provides graphs that aid in understanding the interplay between these parameters and achieving desired conductivity values. It also establishes a baseline for the maximum pelletizing temperature before undesirable degradation of electrolyte occurs. By manipulating the pelletizing pressure, operating pressure, and pelletizing temperature, battery engineers can achieve the desired conductivity for specific applications. The findings emphasize the need to consider operating conditions to ensure satisfactory low-temperature performance, particularly for EVs. Overall, this study provides valuable insights into processing and operating conditions for ASSLBs utilizing Li6PS5Cl0.5Br0.5 argyrodite electrolyte.

This study examines the unique circumstances surrounding state-owned equity participation in non-state-controlled enterprises in China. Specifically, this study examines the impact of state-owned equity participation on the environmental, social, and governance (ESG) performance of non-state-controlled enterprises. Focusing on A-share listed firms on the Shanghai and Shenzhen Stock Exchanges and using data from 2013 to 2021, empirical testing shows that state-owned equity participation can significantly improve the ESG performance of non-state-controlled enterprises, with this conclusion remaining reliable after a series of robustness tests. Top management incentives is a mediating mechanism for state-owned equity participation in enhancing ESG performance. This study also finds that when state-owned equity participates in large enterprises or companies with a high degree of digital transformation, the effect on ESG performance is greater than that of small to medium-sized enterprises (SMEs) or enterprises with a low level of digital transformation. The findings of this study add to the current body of the existing field of research on the factors influencing corporate ESG performance and the impact of state-owned equity on corporate non-financial performance.

Here we investigated the acute effects of an exhaustive intermittent exercise session on immunological parameters of the elderly and the subsequent incidence of upper respiratory tract infections and compare with the moderate-intensity. To do so, ixty-three old subjects were divided into three groups HIIT (n=21) submitted at one High-intensity interval training, SCG (n=21) kept in a sedentary state, and MICT (n=21) submitted at moderate intensity walking. Blood were collected at 5 time points, before, immediately after, 2h, 24h, and 48h after the intervention. In result the IL-6 and TNF-α were overexpressed immediately after the IL-10 stood overexpressed and correlated with IL-17, denoting an inflammatory process, and evidencing an immunologic competence without enhancement of the prevalence of upper respiratory infection tract (URTIs). So a modulation in the balance of Th1/Th2/Th17 cytokines and leukocytes, these modifications did not cause the effect characterized as an immunological window. Perhaps, the typical inflammation process, with IL-10 and IL-17 participation could also produce benefits to combat infections, a pertinent discussion during a post-pandemic time; we consider it a safe exercise program for older adults.

Functional magnetic resonance imaging (fMRI) is an indirect measure of neural activity with the hemodynamic response function (HRF) coupling it with unmeasured neural activity. The HRF, modulated by several non-neural factors, is variable across brain regions, individuals and populations. Yet, a majority of resting-state fMRI connectivity studies continue to assume a non-variable HRF. In this article, with supportive prior evidence, we argue that HRF variability cannot be ignored as it substantially confounds within-subject connectivity estimates and between-subjects connectivity group differences. We also discuss its clinical relevance with connectivity impairments confounded by HRF aberrations in several disorders. We present limited data on HRF differences between women and men, which resulted in a 15.4% median error in functional connectivity estimates in a group-level comparison. We also discuss the implications of HRF variability for fMRI studies in the spinal cord. There is a need for more dialogue within the community on the HRF confound, and we hope that our article is a catalyst in the process.

Real estate market analysis and place-based decision-making can both benefit from understanding house price development. Although considerable amounts of interest have been devoted to housing price modelling, the assessment of house price fluctuation still requires further comparing studies. Housing price prediction is challenging as contributing factors are quite dynamic and subject to a variety of regulating elements. The future understanding of the housing market trends not only provides sufficient customers’ investment trust potential but also enables the financial support to progress more realistic in advance. In this study, a comprehensive data-informed framework is developed to investigate and anticipate real estate house prices using historical data by combining explanatory features. We examined about 500 houses in the Boston area as a case study and discussed how the increase in housing prices could vary by each of the contributing components. Fourteen Machine Learning (ML) regressors imply to the dataset and lead to a comparative study of the accuracy of all the models. ML-based regressors forecast real estate home prices as a function of thirteen influencing factors. The most informative features were also selected by conducting the Permutation Feature Importance technique on all the features The study provides a comprehensive tool for evaluating the robustness and efficiency of ML models for housing price predictions. The results highlighted Random Forest as the best model has an R2 equals to 0.88 and Voting Regressor as the second highest rated model has R2 equals to 0.87. Results of multivariate exploratory data analysis also implied that the average number of rooms and percentage of the lower status of the population have the most significant impact on the price range predictions.

This article will briefly review the progress of h-BN based solid-state metal semiconductor metal (MSM) neutron detectors. In the last decade, several groups have been working on hexagonal boron nitride (h-BN) based solid-state neutron detectors. Recently, the detection efficiency of 59% has been reported. Efficient, low-cost neutron detectors made from readily available materials are essential for various applications. Neutron detectors are widely used to detect fissile materials and nuclear power plants for security applications. The most common and widely used neutron detectors are 3He based, which are sometimes bulky, difficult to transport, have high absorption length, need relatively high bias voltage (>1000 V), and have low Q-value (0.764 MeV). Also, 3He is not readily available material. Thus, there is a strong need to find an alternative detection material. 10B isotope has a high neutron absorption cross-section, and it has been tested as a coating on the semiconducting materials. Due to the two-step process, neutron capture through 10B, and then electron-hole pair generation in a typical semiconducting material, the efficiency of these devices is not up to the mark. The progress in h-BN based detectors requires a review to envision the further improvement in this technology.

A wide variety of applications require high peak laser intensity in conjunction with a narrow spectral linewidth. Typically, injection-locked amplifiers have been employed for this purpose, where a continuous wave oscillator is amplified in a secondary external resonant amplifier cavity using a pulsed pump laser. In contrast, here we demonstrate a setup that combines a CW Ti:sapphire oscillator and pulsed amplifier in a single optical cavity, resulting in a compact system. Dichroic beam combination of blue wavelength semiconductor diodes and the green wavelength of a Nd:YAG laser allowed the simultaneous excitation of the Ti:sapphire crystal by both continuous-wave and pulsed pump sources. A linewidth of &lt;2MHz is achieved in continuous wave operation, while the linewidth increases to about 10MHz in the combined CW + pulsed mode with a pulse duration of 73ns. A peak pulse intensity of 0.2kW is achieved, which should enable efficient single-pass second harmonic generation in a nonlinear crystal.

At the level of the 50 U.S. states, an interconnected nexus of well-being variables exists. These variables have been shown to strongly correlate with estimates of state IQ in interesting ways. But the state IQ estimates (McDaniel 2006) are now more than 16 years old, and the state well-being estimates (Pesta et al., 2010) are over 12 years old. Updated state IQ and well-being estimates are therefore needed. I thus first created new state IQ estimates by analyzing scores from both the Program for the International Assessment of Adult Competency (for adults), and the National Assessment of Educational Progress (for fourth and eighth grade children) exams. I also created new global well-being scores by analyzing state variables from the following four well-being subdomains: crime, income, health, and education. When validating the nexus, several interesting correlations existed among the variables. For example, state IQ most strongly predicted FICO credit scores, alcohol consumption (directly), income inequality, and state temperature. Interestingly, state IQ derived here also correlated .58 with state IQ estimates from over 100 years ago. Global well-being likewise correlated with many old and new variables in the nexus, including a correlation of .80 with IQ. In sum, at the level of the U.S. state, a nexus of important, strongly correlated variables exists. These variables comprise well-being, and state IQ is a central node in this network.

High-energy small electron beams generated by linear accelerators are used for radiotherapy of localized superficial tumors. The aim of the present study is to assess the dosimetric performance under small radiation therapy electron beams of the novel PTW microSilicon detector by comparison with commercially available dosimeters. Relative dose measurements of circular fields with 20, 30, 40 and 50 mm aperture diameters were performed for 4 to 12 MeV energy range of electron beams generated by an Elekta Synergy linac. Percentage depth dose, transverse profiles and output factors normalized to the 10 × 10 cm2 reference field were measured. All dosimetric data were collected in a PTW MP3 motorized water phantom at SSD of 100cm by using the novel PTW microSilicon detector. The PTW diode E and the PTW microDiamond were also used in all beam aperture for benchmarking. Data for the biggest field size were also measured by the PTW Advanced Markus ionization chamber.Measurements performed by the microSilicon are in good agreement with the reference values for all the tubular applicators and beam energies, within the stated uncertainties. This confirms the reliability of the microSilicon detector for relative dosimetry of small radiation therapy electron beams collimated by tubular applicators.

The on-state voltage of MOSFETs is a convenient and powerful temperature-sensitive electric parameter (TSEP) to determine the junction temperature, thus enabling device monitoring, protection, diagnostics and prognostics. The main hurdle in the use of the on-state voltage as a TSEP is the per-device characterization procedure, to be carried out in a controlled environment, with high costs. In this paper we compare two novel techniques for MOSFET junction temperature estimation: controlled shoot-through and direct heating by resistive heaters embedded in two Kapton (polyimide) films. Both allow in-place characterization of the TSEP curve with the device mounted in its final circuit and assembly, including the working heat sink. The two methods are also validated against the conventional procedure in a thermal chamber.

This study used structural equation modelling (SEM) to evaluate the direct effect of sex and age on stroke types and outcomes in Tertiary Health Facilities in Rives State, Nigeria. The study was a cross-sectional retrospective hospital-based research that utilized specific stroke patients’ information between 2015-2019. The study obtained the sex and age, stroke type (ischemic/hemorrhagic), and outcomes (No disability/disability/death) from the records. The retrieved data was Microsoft Excel (2016), then analyzed using SPSS (version 21, Amos) and STATGRAPHICS centurion (Stat Point Tech., Inc.). From the result, out of the recorded 1916 stroke patients, 1229 (64.1%) were female, while 687 (35.9%) were males. The older adults (>55 years) had more recorded cases (n=1289) than young adults (ages 18–35 years; n=77) and middle-aged adults (ages 36–55 years, n=550). The SEM results showed that age was significantly associated with stroke type (P<0.001) and outcomes (P=0.038), while sex was significantly associated with stroke outcomes (P<0.001). The likelihood of death was 1.3 times higher in hemorrhagic stroke than ischemic stroke. In conclusion, age and sex had direct effects on stroke type, while age had a direct effect on stroke outcome. Hemorrhagic stroke was more likely to cause death than ischemic stroke in the studied population.

Beyond the usual ferromagnetic and paramagnetic phases present in spin systems, the usual q-state clock model, presents an intermediate vortex state when the number of possible orientations q for the system is equal to 5 or larger. Such vortex states give rise to the Berezinskii-Kosterlitz-Thouless (BKT) phase present up to the XY model in the limit q→∞. Based on information theory, we present here an analysis of the classical order parameters plus new short-range parameters defined here. Thus, we show that even using the first nearest neighbors spin-spin correlations only, it is possible to distinguish the two transitions presented by this system for q greater than or equal to 5. Moreover, the appearance at relatively low temperature and disappearance of the BKT phase at a rather fix higher temperature is univocally determined by the short-range interactions recognized by the information content of classical and new parameters.

Routing quantum information among different nodes in a network is a fundamental prerequisite for a quantum internet. While single-qubit routing has been largely addressed, many-qubit routing protocols have not been intensively investigated so far. Building on the many-excitation transfer protocol in Ref. , we apply the perturbative transfer scheme to a two-excitation routing protocol on a network where multiple two-receivers block are coupled to a linear chain. We address both the case of switchable and permanent couplings between the receivers and the chain. We find that the protocol allows for efficient two-excitation routing on a fermionic network, although for a spin-12 network only a limited region of the network is suitable for high-quality routing.

In this work, meshless methods are applied for the solution of two-dimensional steady-state heat conduction problems with nonlocal multi-point boundary conditions (NMBC). These meshless procedures are based on multiquadric radial basis function (MQ RBF) and its modified version (i.e. integrated MQ RBF). The proposed meshless methods which were recently published in \cite{Reutskiy2016} is compared with standard collocation method (i.e. Kansa's method). Three different sorts of solution domain are considered in which Dirichlet boundary condition is specified on some part of the boundary and is related to the unknown function values at a discrete set of interior points. The influence of NMBC on the accuracy and condition number of the system matrix associated to the proposed methods is investigated. The sensitivity of the shape parameter is also analyzed in the proposed methods. Performance of the proposed approaches in terms of accuracy and efficiency is confirmed on the benchmark problems.

This is a report on a dynamic autonomous magnetic interaction which does not depend on polarities resulting in short ranged repulsion involving one or more inertial bodies and a new class of bound state based on this interaction. Both effects are new to the literature, found so far. Experimental results are generalized and reported qualitatively. Working principles of these effects are provided within classical mechanics and found consistent with observations and simulations. The effects are based on the interaction of a rigid and finite inertial body (an object having mass and moment of inertia) endowed with a magnetic moment with a cyclic inhomogeneous magnetic field which does not require to have a local minimum. Such a body having some DoF involved in driven harmonic motion by this interaction can experience a net force in the direction of the weak field regardless of its position and orientation or can find stable equilibrium with the field itself autonomously. The former is called polarity free magnetic repulsion and the latter magnetic bound state. Experiments show that a bound state can be obtained between two free bodies having magnetic dipole moment. Various schemes of trapping bodies having magnetic moments by rotating fields are realized as well as rotating bodies trapped by a static dipole field in presence of gravity. Also, a special case of bound state called bipolar bound state between free dipole bodies is investigated.

Measuring the status and trends of biodiversity is critical for making informed decisions about the conservation, management or restoration of species, habitats and ecosystems. Defining the reference state against which status and change are measured is essential. Typically, reference states describe historical conditions, yet historical conditions are challenging to quantify, may be difficult to falsify, and may no longer be an attainable target in a contemporary ecosystem. We have constructed a conceptual framework to help inform thinking and discussion around the philosophical underpinnings of reference states and guide their application. We characterise currently recognised historical reference states and describe them as Pre-Human, Indigenous Cultural, Pre-Intensification and Hybrid-Historical. We extend the conceptual framework to include contemporary reference states as an alternative theoretical perspective. The contemporary reference state framework is a major conceptual shift that focuses on current ecological patterns and identifies areas with higher biodiversity values, regardless of the disturbance history. The specific context for which we design the contemporary conceptual frame is underpinned by an overarching goal—to maximise biodiversity conservation and restoration outcomes in existing ecosystems. The contemporary reference state framework can account for the inherent differences in the diversity of biodiversity values (e.g., species richness, habitat complexity) across spatial scales, communities and ecosystems. In contrast to historical reference states, contemporary references states are measurable and falsifiable. This ‘road map of reference states’ offers perspective needed to define and assess the status and trends in biodiversity and habitats. Our framework for contemporary reference states provides a tractable way for policy-makers and practitioners to navigate biodiversity assessments to maximise conservation and restoration outcomes in contemporary ecosystems. We illustrate how to define a contemporary reference state using an example from south-eastern Australia.

Background: Sex differences in blood pressure (BP) exist during all reproductive life between women and men whereas a sharper increase in BP occurs after menopause which is associated with increased prevalence of cardiovascular diseases. This study examined cardiovascular and biochemical parameters in perimenopausal women (PW) aiming to investigate the influence of sex on a) office BP and for 24 hours; b) cardiac autonomic modulation; c) redox state by measuring MDA, SOD, and catalase; d) NO_x^- concentration. In addition, aerobic exercise training (AET) was applied for detecting changes in cardiovascular responsiveness during the menopausal transition. Methods: Thirty-one participants were enrolled, healthy PW and age-matched men. Cardiovascular and biochemical biomarkers were evaluated at baseline and after AET (8 weeks of exercise on a treadmill, three sessions/week, duration of 30-40 minutes). Results: At rest, PW presented: a) a lower diastolic BP during daytime; b) a lower absolute and normalized LF component as well as a higher HF normalized component; d) no sex differences for redox biomarkers and NO_x^- concentration. After AET, only PW was responsive in lowering systolic BP that was accompanied by an increase in NO_x^- concentration and SOD activity. Regarding HRV, both groups were responsive to the AET. Conclusions: During the menopausal transition, systolic BP was similar to men whereas cardiac autonomic modulation remained unaltered showing the influence of sex steroids on BP. In Addition, AET was fundamental during the menopause transition by preventing an elevation in BP, minimizing the effects of aging associated with estrogen deficiency on women's cardiovascular health.

Directional modulation (DM), as an emerging promising physical layer security (PLS) technique at the transmitter side with the help of an antenna array, has developed rapidly over decades. In this study, a DM technique using a polarization sensitive array (PSA) to produce the modulation with different polarization states (PSs) at different directions is investigated. PSA can be employed for more effective DM for an additional degree of freedom provided in the polarization domain. The polarization information can be exploited to transmit different data streams simultaneously at the same directions, same frequency, but with fixed different PSs in the desired directions to increase the channel capacity, and with random PSs off the desired directions to enhance PLS. The proposed method has the capability of concurrently projecting independent signals into different specified spatial directions while simultaneously distorting signal constellation in all other directions. Mathematical analysis and design examples for single-beam and multi-beam DM systems are presented. Simulation results demonstrate that the proposed method is more effective for PLS and the channel capacity is significantly improved compared with conventional antenna arrays.

It is shown that, for a de Sitter Universe, the Hartle-Hawking (HH) wave function can be obtained in a simple way starting from the Friedmann- Lemaitre-Robertson-Walker (FLRW) line element of cosmological equations. An oscillator having imaginary time is indeed derived starting from the Hamiltonian obtaining the HH condition. This proposes again some crucial matter on the meaning of complex time in cosmology. In order to overcome such difficulties, we propose an interpretation of the HH framework based on de Sitter Projective Holography.

The paper aims in assessing risks of mandible fractures consequent to impacts or sport accidents. The role of the structural stiffness of mandible, related to disocclusion state, is evaluated through numerical simulations using the finite element method (FEM). It has been assumed that the quasi-static stress field, due to distributed forces developed during accidents, could explain the common types of mandibular fractures. Geometric model of adolescent mandible was built, upon the basis of medical imaging, in CAD software with distinction between cortical layer and inner spongy bone. The finite element model of disoccluded mandible was next created. Mandibular condyles were supposed jammed in the maxillary fossae. The total force of 700 N, simulating an impact on mandible, has been sequentially applied in three distinct areas: centrally, at canine zone and at the mandibular angle. Clinically most frequent fractures of mandible were recognized through the analysis of maximal principal stress and maximal principal strain fields. Mandibular fracture during accidents can be analyzed at satisfactory level using linear quasi-static FE models for designing protections in sport and transport. The proposed approach can be improved by introducing more realistic interactions between condylar processes and fossae.

Assessment of the trends of land cover and vegetation dynamics (VD) using remote sensing (RS) and indicators such as anthropogenic activities and the socio-demographic information is essential in order to make proper planning for sustainable management. This paper attempts to evaluate land cover change (LCC) and VD in Kebbi State, Nigeria using historical Landsat data from 1986-2016 by means of remote sensing. The Driver-Pressure-State-Impact-Response (DPSIR) framework was later employed using both primary and secondary data for a better understanding of the drivers, the state of the environmental condition, the causes as well as the impact of the change. The images were classified into five thematic land cover classes as Dense Vegetation, shrubs/built area, farmland, bare/grassland and water body by means of Maximum likelihood supervised classification technique in accordance with Anderson classification scheme level 1, with acceptable accuracy. Pre-classification and post-classification change detection (CD) methodologies were executed using Normalized difference vegetation index (NDVI) and Image differencing respectively. The study illustrates a steady decline in dense vegetation and shrubs/build areas while farmland and bare/grassland increases, however, water bodies remain unchanged. The DPSIR pin-point that the major drivers of change in the study area have been the pressing need for farming land as the population grows and socioeconomic demands including fuelwood consumption and endemic poverty. Expansion of Farming land, fuelwood consumption and the need for construction materials are identified as the main key elements exerting pressure for the change. The state of the condition indicates a steady decline in dense vegetation and shrubs areas while farmland and bare/grassland are increasing significantly. The impacts include land degradation, the decline in the provision ecosystem goods and services, biodiversity loss through loss of habitats. The study, however, noted that many international and national policies in response to land degradation are channelled toward land restoration and remediating of the environment, through afforestation programs and improving the livelihood of the rural people through providing alternative income sources since they depend heavily on land for sustenance. However, the state governments, communities and individual commonly organized annual tree planting campaign with the main purpose of environmental protection.

The purpose of this work is to present an adaptive sliding mode luenberger state observer with improved disturbance rejection capability and better tracking performance under dynamic conditions. The sliding hyperplane is altered by incorporating the estimated disturbance torque with the stator currents. Also, the effects of parameter detuning on the speed convergence is observed and compared with the conventional disturbance rejection mechanism. The entire drive system is first built in simulink environment. Then, the simulink model is integrated with RT-Lab blocksets and implemented in a relatively new real-time environment using OP4500 real-time simulator. Real-time simulation and testing platforms have succeeded offline simulation and testing tools due to their reduced development time. The real-time results validate the improvement in the proposed state observer and also correspond to the performance of the actual physical model.

This paper first explains the theory of the origin of force from a new perspective, explaining that the origin of all forces is caused by the "missing of energy in the time dimension" (non-conservation in a certain period of time), and constructs a unified theory of force on this basis. Then, through the unified theory of force, the following phenomena are reinterpreted: (1) The common origin of the inverse square law of gravitation and electromagnetic force; (2) The origin of the repulsive force of electrons and protons at small distances; (3) The mystery of the rotation curve of galaxies and the new explanation of "dark matter"; (4) explain the origin of the magnetic field; (5) Predict that moving magnets have the same radiation effect as charged particles (electron magnetic moments also have radiation effects); (6) Reinterpret Maxwell's displacement current; (7) Reinterpret synchrotron radiation and bremsstrahlung; (8) Explain that the strong and weak forces are short-range forces; (9) Predict the true structure of black holes and the origin of gravitational waves;(10) Possible explanation for the origin of the speed of light.

The development of sustainability, the improvement of the quality of life, and the protection of future generations have become of prime importance in light of climate changes and carbon emissions. Universities are at the top of institutions that should participate in creating an environmentally friendly infrastructure. This study thus aimed to explore the extent to which Saudi universities achieve sustainability in the light of the Saudi Green Initiative from the faculty members’ perspective. Surely, this investigation would produce a proposal to promote sustainability in Saudi universities. A questionnaire consisting of five dimensions, namely academic sustainability, community partnership, resource management, planning and administration, and innovation and leadership was developed and administered to 120 faculty members from five Saudi universities. The participants’ ratings of Saudi universities’ achievement of sustainability dimensions ranged from high to moderate. Based on the results, a proposal was offered to take sustainability in Saudi universities to a higher level.

This chapter aims to construct a relatively complete, universal, and highly reliable road surface state monitoring and perception system through the research of the A1 contact road reconstruction project of an international airport (hereinafter referred to as the “airport”). The system design is based on on-the-spot investigation, theoretical analysis, and engineering practice, using vibrating string type and resistive strain sensors as sensing means, real-time high-frequency signal acquisition technology as the guide, 4G router for wireless communication technology as the media, and storage technology for monitoring system based on server storage terminals. In combination with engineering background, aircraft motion state, main landing gear configuration, sensor selection and evaluation, and other major factors, the actual monitoring information needs of the plane are fully taken into account, as well as the difference in sensor information types, and the system design is carried out by stratification and classification.

Patients with cancer experience insomnia or sleep disturbances. This study aimed to explore whether the discrepancy between a patient's desired time in bed and total sleep time (DBST) index is a measurement tool for insomnia severity or sleep onset latency [SOL] in patients with cancer. This retrospective medical records review study gathered clinical information and rating scale scores including Insomnia Severity Scale (ISI), Cancer-related Dysfunctional Beliefs about Sleep scale (C-DBS), Patient Health Questionnaire-9 items (PHQ-9), State subcategory of State and Trait Anxiety Inventory, and Short form of Fear of Progression Questionnaire. Sleep indices of time variables (bedtime, sleep onset time, and wake-up time), duration variables [SOL, time in bed (TIB), time in bed for 24 hours (TIB/d), and duration from wake-up time to bedtime (WTB)], and the DBST index were calculated. The ISI score was predicted by PHQ-9 (β=0.34, P&lt;0.001), C-DBS (β=0.17, P=0.034), and DBST index (β=0.22, P=0.004) with a significant correlation with the DBST index (r=0.19, p=0.020). The DBST index was significantly correlated with long SOL (r=0.23, P=0.005). Long SOL was predicted by early bedtime (β=0.18, P=0.045), short WTB (β=-0.26, P=0.004), and high DBST index (β=0.19, P=0.013). The DBST index was significantly correlated with a predicting variable each for insomnia severity and SOL in patients with cancer.

Character education is essential for the current millennial generation and must be applied in everyday life in the surrounding community. The character of the millennial generation is different from the previous generation, which requires us to pay more attention to character education which is starting to erode along with the times. The Millennial generation is a generation that in everyday life can never be separated from science and technology. In this digital era, the millennial generation has a social function of strength in technology. In this study, there are research questions that will be discussed in this article, namely the first regarding what problems occur in the millennial generation who occupy the digital era?. Second, what is the important role and influence of the digital era on character education for the millennial generation in Indonesia?. Writing this article uses a qualitative research method, namely a literature review study, where researchers use or look for references from journals or books. Samples of respondents were taken randomly from each region, and there were ten respondents. From this research, it is found that the millennial generation in the digital era chooses to use social media to access the latest news and information rather than reading print media that contains education. This article aims to find out the importance of character education for the millennial generation, which is starting to erode with the times in the digital era. Many people underestimate character education, especially for the current millennial generation. Therefore, we must implement educational programs at any level, especially in Indonesia, because the character shows the national identity. This article will discuss the vital role and influence of character education for millennials who live in the digital era to be aware of the importance of character education in citizenship.

J/ψ, a charmonium bound state made of a charm and an anti-charm quark, has been discovered in the 1970s and confirmed the quark model. Because the mass of charms quarks is significantly above the Quantum Chromodynamics (QCD) scale ΛQCD, charmonia are considered as excellent probes to test perturbative Quantum Chromodynamics (pQCD) calculations. Over the past decades, they have been studied extensively at different high energy colliders. However, their production mechanisms, which involves multiple scales, are still not very well understood. Recently, in high multiplicity p+p collisions at RHIC and at the LHC, a significant enhancement of J/ψ production yield has been observed, which suggests a strong contribution from the Multi-Parton Interaction (MPI). This is different from the traditional pQCD picture where charm quark pairs are produced from a single hard scattering between partons in p+p collisions. In this work, we will report the J/ψ normalized production yield as a function of normalized charged particle multiplicity over a board range of rapidity and event multiplicity in the J/ψ→μ+μ− channel with PHENIX Run 15 p+p data at \sqrt{s}=200 GeV. The results are compared with PYTHIA 8 simulations with the MPI option on and off. Finally, the outlooks of J/ψ in p+Au and Au+p collisions along with Color Glass Condensate (CGC) predictions and of multiplicity dependent ψ(2S)/J/ψ ratio in p+p data will be briefly discussed.

The survey findings reveal that rivers worldwide carry an annual sediment load of 15 billion tons into the sea, and the Yellow River basin alone contributes 1.6 billion tons of sand. Therefore, understanding the science of wind and sand in the Yellow River is crucial to ensuring the safe development of similar basins across China and the world. This study examines the midstream wind and sand area of the Xiliugou tributary, a part of the upper Yellow River. The researchers used a stepped sand collector combined with an anemometer to measure the sand transport flux at 0-50 cm height on various underlying surfaces of the basin. Then, they estimated the amount of wind and sand entering the Yellow River using a function model based on the measured factors. Furthermore, the team analyzed the particle size composition of wind-eroded sand to better understand the principles of wind and sand erosion and accumulation in the basin. The results of the study show that the sand transport flux per unit area varies significantly across different underlying surfaces. Moreover, the contribution of moving sandy land, semi-fixed sand, and fixed sand to wind and sand deposition in the Yellow River basin was 77.08%, 15.30%, and 7.62%, respectively. The vertical change of sand transport rate on the basin's surface demonstrates that the total sand transport rate is an exponential function of wind speed. Based on this relationship, the researchers estimated that the total annual average wind and sand entering the Yellow River basin via the Xiliugou tributary is approximately 8.09×105t. Due to the basin's unique geography and sand source, the particle size composition of wind-eroded sand differs between the east and west sides of the river channel. On the west side, desert sand, mainly fine sand, and very fine sand constitutes the sand source. Conversely, on the east side, sand collected in the riverbed by secondary wind erosion is the primary sand source. Furthermore, human activities have disturbed the grain composition, mainly comprising powder and clay particles. This phenomenon, known as "wind-blown mud and water-washed sand," is evident in this geographical unit. In conclusion, the Yellow River basin still faces significant ecological security hazards. Understanding the coupling relationship between desert-basin-sand and wind is the foundation for effectively controlling wind and sand flow into the Yellow River basin.

The importance and near ubiquity of the Golden Ratio in disciplines like chemistry and biology is well known, but only recently has it come to light in areas pertaining to the Quantum domain. By using a modified tool-kit of hyper-complex numbers (known as Dimensional Gate Operators) and numerical analysis, we uncover a connection between hyper-dimensional objects, the Fibonacci sequence and that of quasiparticles and excitations. The results show that dimensionality increases in step with the Fibonacci sequence.

In the upper charged layers of the atmosphere, the plasma is very rarefied. The collisions between its molecules are almost non-existent, and the driving forces behind them are the Lorentz forces resulting from the electric and magnetic fields. For this reason, we are interested in studying the behavior of non-collision plasmas because of its essential applications, such as the movement of satellites in the charged atmosphere. In this paper, the flow problem of collisionless gaseous plasma is examined. For that propose, we solve the unsteady Vlasov-Maxwell system of non-linear partial differential equations analytically. Methods of moments and traveling wave parameters are used to acquire an exact solution. Specific macroscopic properties of collisionless gaseous plasma are calculated along with electrical and magnetic fields. Further, thermodynamic estimation, such as entropy and entropy production, is presented. Those calculations allow us to measure the consistency with the laws of non-equilibrium thermodynamics. Relations between internal energy modification participations are predicted using Gibbs' equation for collisionless plasma. The modification effect of internal energies due to electro-magnetic fields is found to be small compared with the internal energy change due to the effect of entropy. That is because these fields are self-induced by plasma particles due to the sudden movement of the rigid plane plate. The results are accomplished according to the typical argon gaseous plasma model. Three-dimensional diagrams showing the measured variables are drawn to investigate and discuss their behavior. The problem has many commercial applications for the movement of objects in the charged atmosphere.

The topic of this paper is the airborne evaluation of ICESat-2 Advanced Topographic Laser Altimeter System (ATLAS) measurement capabilities and surface-height-determination over crevassed glacial terrain, with a focus on the geodetical accuracy of geophysical data collected from a helicopter. To obtain surface heights over crevassed and otherwise complex ice surface, ICESat-2 data are analyzed using the density-dimension algorithm for ice surfaces (DDA-ice), which yields surface heights at the nominal 0.7~m along-track spacing of ATLAS data. As the result of an ongoing surge, Negribreen, Svalbard, provided an ideal situation for the validation objectives in 2018 and 2019, because many different crevasse types and morphologically complex ice surfaces existed in close proximity. Airborne geophysical data, including laser altimeter data (profilometer data at 905~nm frequency), differential Global Positioning System (GPS), Inertial Measurement Unit (IMU) data, on-board-time-lapse imagery and photographs, were collected during two campaigns in summers of 2018 and 2019. Airborne experiment setup, geodetical correction and data processing steps are described here. To date, there is relatively little knowledge of the geodetical accuracy that can be obtained from kinematic data collection from a helicopter. Our study finds that (1)~Kinematic GPS data collection with correction in post-processing yields higher accuracies than Real-Time-Kinematic (RTK) data collection. (2)~Processing of only the rover data using the Natural Resources Canada Spatial Reference System Precise Point Positioning (CSRS-PPP) software is sufficiently accurate for the sub-satellite validation purpose. (3)~Distances between ICESat-2 ground tracks and airborne ground tracks were generally better than 25~m, while distance between predicted and actual ICESat-2 ground track was on the order of 9~m, which allows direct comparison of ice-surface heights and spatial statistical characteristics of crevasses from the satellite and airborne measurements. (4)~The Lasertech Universal Laser System (ULS), operated at up to 300~m above ground level, yields full return frequency (400~Hz) and 0.06-0.08~m on-ice along-track spacing of height measurements. (5)~Cross-over differences of airborne laser altimeter data are 0.1918 $\pm$ 2.385~m along straight paths over generally crevassed terrain, which implies a precision of approximately 2.4~m for ICESat-2 validation experiments. (6)~In summary, the comparatively light-weight experiment setup of a suite of small survey equipment mounted on a Eurocopter (Helicopter AS-350) and kinematic GPS data analyzed in post-processing using CSRS-PPP leads to high accuracy repeats of the ICESat-2 tracks. The technical results (1)-(6) indicate that direct comparison of ice-surface heights and crevasse depths from the ICESat-2 and airborne laser altimeter data is warranted. The final result of the validation is that ICESat-2 ATLAS data, analyzed with the DDA-ice, facilitate surface-height determination over crevassed terrain, in good agreement with airborne data, including spatial characteristics, such as surface roughness, crevasse spacing and depth, which are key informants on the deformation and dynamics of a glacier during surge.

The aim of the work is to study the effect of the 3D printing process on the microstructural and hydrophilic properties of polylactic acid (PLA) samples with various model printing patterns obtained from the black Filament PLA by sequentially applying polymer layers using the FDM (Fused Deposition Modeling) method. X-ray phase analysis revealed partial crystallization of PLA polymer chains in printed samples, which occurs under thermal and mechanical action on the original amorphous PLA filament during 3D printing to varying degrees, depending on the geometry of the pattern and the morphology of its surface. At the same time, IR spectroscopy data indicate the preservation of all intrastructural chemical bonds of polylactide. Measured at the original installation, the values of the wetting edge angles on the surface of the printed samples are in the range φ = 50-60°, which is significantly less than the right angle. This indicates the hydrophilic properties of all samples’ surface. At the same time, the influence of different geometries of model drawings in printed samples was found not only on the morphology of the samples’ surface according to SEM data, but also on its wettability.

Two new species of free-living nematode, Metachromadora parobscura sp. nov. and Molgolaimus longicaudatus sp. nov., from mangrove wetlands of Beihai, Guangxi province in China, are described. Metachromadora parobscura sp. nov. is characterized by eight longitudinal rows of somatic setae arranged from the posterior part of the body, loop-shaped amphidial foveae with an open top and double contours, pharynx with bipartite cuticularized internal cavity, spicules with well-developed capitulum, gubernaculum extended ventrally to support spicule, 6-8 precloacal tubular supplements, and short, conical tail with two protuberances. Molgolaimus longicaudatus sp. nov. is characterized by short cephalic setae, relatively small amphidial fovea, ventrally bent spicules with pronounced hamose curved proximal terminus, two undulate precloacal supplements, and relatively long conico-cylindrical tail. Nearly full-length SSU sequences of the two species were provided, and phylogenetic tree based on maximum likelihood analyses supported the taxonomic position of the two new species. Combined use of traditional morphology-based taxonomy and molecular technology would be a good choice for identification of free-living nematodes.

The study examines the behavior of the Mechanically Stabilized Earth (MSE) wall using available reinforcement materials in Danang, Vietnam. The MSE was reinforced by the self-fabricated galvanized steel grids using CB300V steel with 3 cm ribs. The backfill soil is a sandy clay soil from the local area with a low cohesion. A full-scale model with full instrumentation was installed to investigate the distribution of tensile forces along the reinforcement layers. The highest load that caused the wall to collapse due to internal instability (reinforcement rupture) was 302 kN/m2, which is 15 times the design load of 20 kN/m2. The failure surface within the reinforced soil had a parabolic sliding shape which is similar to the theoretical studies. At the failure load level, the maximum lateral displacement at the top of the wall facing was small (3.9 mm) which is significantly lower than the allowable displacements for the retaining wall. Furthermore, a numerical model using FLAC software was applied to simulate the performance of the MSE wall. The modeling results are in good agreement with the physical model. Thus, the self-fabricated galvanized steel grids could be confidentially used in combination with the local backfill soil for the MSE walls.

Different nutraceuticals are often considered by parents of infants and children with abdominal pain and disorders of the gut-brain interaction. Herb extracts and natural compounds have long been used in traditional medicine, but clinical pediatric trials are very limited. This narrative review based on relevant studies identified through Pubmed-Medline literature search updated to October 2023, focused on the effect of nutraceuticals in infantile colic, functional abdominal pain and irritable bowel syndrome in children and adolescents. Significant reduction of colic episodes and crying time was reported in two studies on fennel (seeds oil or tea), in three studies on different multiple herbal extracts (all including fennel), in one study on Mentha piperita, and in at least two double-blind randomized controlled studies on Lactobacillus reuteri DSM 17938 and Bifidobacterium lactis BB-12 (108 CFU/day for at least 21 days) in breast-fed infants. Compared to placebo, in children with functional abdominal pain or irritable bowel syndrome a significant reduction of pain was reported in two studies supplementing peppermint oil capsules or psyllium fibers, in one study on corn fiber cookies or partial hydrolysed guar gum or a specific multiple herbal extract (STW-5) or vitamin D supplementation. To date, there is a moderate certainty of evidence with a weak grade of recommendation for Lactobacillus reuteri DSM 17938 (108 CFU/day) for reducing pain intensity in children with functional abdominal pain and for Lactobacillus rhamnosus GG (1-3 x109 CFU twice daily) for reducing pain frequency and intensity in children with IBS. Further large and well-designed pediatric studies are needed to prove efficacy and safety of different herbal extracts and prolonged use of studied products in infants and children with pain disorders of the gut-brain interaction.

The present study evaluates ratcheting response of notched and press-fitted Al 7075-T6 specimens under stress-controlled asymmetric cycles. The degree of interference fit (DIF) directly influenced progressive plastic strain magnitude and rate at notch root region. Local ratcheting at the hole-pin interference region was analyzed by means of two kinematic hardening rules of Ahmadzadeh-Varvani (A-V) and Chaboche coupled with the Neuber rule. Ratcheting strains at notch root of aluminum samples with DIF=0 (non-press-fitting samples) were measured to be highest in magnitude. For the press-fitted samples, however ratcheting strains dropped noticeably as DIF increased from 1% to 2%. Press-fitted samples plastically deformed the perimeter edge of notches and improved materials locally at the notch edge, resulting in a better resistance against ratcheting progress. Local ratcheting at different distances of 0.5, 1.3 and 3.0 mm from the notch root were evaluated for both pinned and unpinned samples through the hardening rules and compared with those of measured values. The predicted ratcheting curves by means of the A-V and Chaboche hardening rules closely agreed with experimental data and respectively positioned above and below the measured data.

Background and Objectives: The purpose of this study was to assess the bleeding that occurs during the first weeks of gestation and its implications throughout pregnancy. Secondarily, we studied the associated complications that appeared and tried to identify possible risk factors that could serve to select women at a greater risk of adverse outcomes that could benefit from an early diagnosis and improved monitoring. Materials and Methods: We selected all the women who consulted for first trimester metrorrhagia in the Emergency Department of the Hospital QuirónSalud in Malaga over the year 2015. We refer to first trimester metrorrhagia as that which occurs until week 12+6. Once the pregnant women were identified, we studied certain risk factors already present prior to the gestation and others associated with the gestation and its evolution. Results: After reviewing the visits to the obstetrics and gynecology emergency department, we selected those patients that met the inclusion criteria, resulting in a sample of 696 patients that we followed up. The average age of our patients was 34.1 years, with an average number of visits to the hospital of 1.67, most of them between the 5th and 8th weeks of pregnancy. 45.3% of these pregnancies resulted in a first trimester miscarriage, mainly between weeks 6 and 8. We tried to establish associations in order to identify possible risk factors, finding a relationship between increased maternal age and a higher risk of first trimester pregnancy loss, which rises as maternal age increases (33,37 4,316 years vs 35,01 4,740 years). This increase in risk is proportional to the increase in age. We made subgroups of women over 35 and over 40 and confirmed that increased age led to worse outcomes. We also studied several gestational complications and concluded that they appeared more frequently among older women. These complications include prematurity (33.11 vs 34.48 years), gestational diabetes (33.11 vs 36.06 years) and preeclampsia (33.25 vs 35 years). We reviewed the obstetric history of pregnant women whose gestation resulted in miscarriage and found that 50.5% of them had previously had another loss. Conclusions: Comparing the results with data from the general population, we found that the rate of first trimester miscarriage is up to 3 times higher among women who present bleeding during the first weeks of gestation compared to those who do not develop this complication. Maternal age is a risk factor for first trimester pregnancy loss and for the development of complications associated with pregnancy.

The paper describes a new formula for calculating the mutual inductance between a thin conical sheet inductor and a filamentary circular loop, which are coaxial. The presented formula is derived semi-analytically using the complete elliptic integrals of the first, second, and the third kind, along with the integral term which will be solved numerically. The results are validated using double and single integration methods, as well as the semi-analytical formula. The mutual inductance between a thin wall solenoid and a filamentary circular loop can be obtained using the new formula for the conical coil and circular loop. Presented formulas can be useful in various applications, such as broadband RF and wireless power transfer systems that utilize conical inductors. Overall, the paper presents a valuable contribution to the field of inductor design and can be useful in various applications involving conical inductors.

Space-time evolution is briefly explained by using the 3-dimensional quantized space model (TQSM) based on the 4-dimensional (4-D) Euclidean space. The energy (mass), charges and absolute time are newly defined based on the 4-D Euclidean space. The photons and gravitons are understood as the 2-D space fluctuations along the space axes and 1-D time fluctuations along the time axis, respectively. This indicates that the electromagnetic (EM) and gravitational (G) waves can be unified into the so called gravityelectromagnetic (GEM) wave which has both space and time fluctuations. The photon with zero force fields is the 2EM wave because an EM wave corresponds to a charged fermion. The dark matter bosons, weak force bosons, strong force bosons are the 1-D time fluctuations which can be expressed by the G waves. This indicates that all five forces are unified by the GEM wave. It is called as the super unification theory in the present work. And the force carrying bosons and mesons are, for the first time, proposed as the possible candidates of the magnetic monopoles like the fermions and baryons are the electric monopoles. The signs of the magnetic charges quantized as q_m=cq are newly defined. The big bang is understood by the space-time evolution of the 4-D Euclidean space but not by the sudden 4-D Minkowski space-time creation. The big bang process created the matter universe with the positive energy and the partner anti-matter universe with the negative energy from the CPT symmetry.