Chemokine C-C receptor 6 (CCR6) and its exclusive ligand CCL20 is an extremely important chemokine receptor-ligand pair which controls cell migration and immune induction during inflammatory disease. Not many scientific studies have been undertaken to study its immune mechanisms in detail, but its unique contribution to steady state cell chemotaxis in upholding immune tolerance and regulating immune homeostasis during inflammation is evident in multiple organ systems, including lung, liver, kidney, skin, brain, eye, joints, gonads and the gut in the human body. The role of CCR6 is constitutively expressed as a series of much debilitating severe inflammatory and autoimmune diseases, HIV and cancer metastasis. CD4⁺ T cells, the central organizers of adaptive immunity, are stringently mobilized by the CCR6/CCL20 axis also induced by cytokines and a host of other factors in a carefully executed immune modulation scenario, to bring about a delicate balance between pro-inflammatory T_H17 cells and regulatory T_reg cells. Although the exact immune regulatory role is not elucidated yet, CCR6/CCL20 axis is implicated as a front runner which determines the polarization of T_H17 and T_reg cells and consequently the resolution or progression of many debilitating disorders. This review therefore aims at emphasizing the pleiotropic significance of the chemokines CCR6 and CCL20 in immunologic function in multiple organ systems thereby hoping to accentuate its value in future therapeutic modalities.

Soil tillage intensity influences the distribution of nutrients, and soil’s physical and me-chanical properties, as well as gas flows. The impact of reduced tillage on these indices in spring barley cultivation is still insufficient and requires more analysis on a global scale. This study was carried out at Vytautas Magnus University, Agriculture Academy (Lithu-ania) in 2022–2023. The aim of the investigation was to determine the effect of the tillage systems on the soil temperature, moisture content, CO2 respiration and concentration in spring barley cultivation limited by the semi-humid subarctic climate. Based on a long-term tillage experiment, five tillage systems were tested: deep and shallow mold-board ploughing, deep cultivation-chiselling, shallow cultivation-chiselling, and no-tillage. Shallow ploughing technology was found to be better at conserving soil moisture and maintaining a higher temperature. Deep cultivation had a lower moisture content and lower soil temperature. Shallow cultivation fields in most cases increased CO2 emissions and CO2 concentration. The results show that in direct sowing fields, most cases had a positive effect on crop density. Direct sowing fields resulted in significantly lower grain yields of spring barley in the years studied.

Cobalt ferrite nanoparticles (NPs) doped with rare earth (RE) metals with general formula CoFe_2-xRE_xO₄ (RE=Yb, Dy, Gd; x = 0.0 - 0.3) were synthesized by the co-precipitation method followed by post thermal treatment. The influence of RE doping on structural, magnetic and thermal properties and potential biomedical applications like magnetic hyperthermia has been investigated. In the as-prepared samples RE cations enter the spinel lattice as detected by X-ray diffraction. Thermal treatment leads to thermodynamically stable and relaxed single-phase spinel structures only for lower RE content, x = 0.01-0.05. However, annealed samples present higher mass magnetization values (M_S), up to 83 Am²/kg. RE content also affects M_S, especially in the case of annealed samples where it decreases linearly with x from about 80 Am²/kg (x = 0.01) to about 60 Am²/kg (x = 0.30). Thermal treatment induces a reduction in coercivity from 60-100 mT for as-prepared samples to 18-33 mT for annealed samples, in a nonlinear manner with respect to RE content. Heating efficiency, i.e., Specific Loss Power (SLP), of all samples has been studied using both magnetometric and calorimetric method to deeper examine the energy loss mechanisms involved.

The paper is focused on numerical modeling of multi-strand cable lines placed in free air. Modeling is carried out within the framework of the so-called multi-physics approach using commercial software. The paper describes in detail the steps undertaken to develop realistic, reliable numerical models of power engineering cables, taking into account their geometries and heat exchange conditions. The results might be of interest to the designers of multi-strand cable systems.

Ammonia (NH3), the most prevalent alkaline gas in the atmosphere, plays a significant role in PM2.5 formation, atmospheric chemistry, and new particle formation. This paper reviews quantification of [NH3] through measurements, satellite-remote-sensing, and modeling reported in over 500 publications towards synthesizing current knowledge of [NH3], focusing on spatiotemporal variations, controlling processes, and quantification issues. Most measurements are through regional passive sampler networks. [NH3] hotspots are typically over agricultural regions like the Midwest US and North China Plain, with elevated concentrations reaching monthly averages of 20 and 74 ppbv, respectively. Topographical effects dramatically increase [NH3] over the Indo-Gangetic Plains, North India and San Joaquin Valley, US. Measurements are sparse over oceans, where [NH3] ≈ few tens of ppbv, variations of which can affect aerosol formation. Satellite-remote-sensing (AIRS, CrIS, IASI, TANSO-FTS, TES) provides global [NH3] quantification in the column and at surface since 2002. Modeling is crucial for improving understanding of NH3 chemistry and transport, its spatiotemporal variations, source apportionment, exploring physicochemical mechanisms, and predicting future scenarios. GEOS-Chem (global) and FRAME (UK) models are commonly applied for this. A synergistic approach of measurements↔satellite-inference↔modeling is needed towards improved understanding of atmospheric ammonia, of concern from the standpoint of human health and the ecosystem.

Bioenergy produced from perennial feedstocks such as woody biomass could serve as an opportunity to strengthen local and regional economies and also jointly produce various environmental services. In order to assess the potential for biomass- based bioenergy, it’s essential to characterize the interest that potential biomass suppliers have in such an endeavor. In the U.S. Great Plains region, this largely means assessing relevant perceptions of farmers and ranchers. We conducted a series of farmer and rancher oriented focus groups in North Dakota, South Dakota, Nebraska and Kansas to qualitatively explore opinions about the role that trees can play in agriculture and interest in woody biomass systems within existing Northern Great Plains (NGP) farms and ranches. Our findings suggest that farmer and ranchers generally value the role that trees, or tree-based practices like windbreaks can play in agriculture particularly on marginal farmland in terms of conservation or crop protection. Yet relative to the potential of trees as a biomass crop there is a distinct lack of knowledge and skepticism. Farmers and ranchers also noted variable degrees of risk concern and uncertainty regarding investing in tree-based systems, as well as a number of perceived external market related constraints to integrating trees within their managed systems. Most of the participants recognized that if biomass production or an increase in tree planting and management in general were to expand in the NGP region, government programs would likely be required to provide much needed technical guidance and financial incentives. As the NGP regional bioeconomy continues to emerge and expand, private and public investment relative to niche bioenergy feedstocks such as woody biomass should address the type of information needs that farmers and ranchers have relative to integrating biomass production into existing farm and ranch systems.

Abstract— Flight Control System is an integrated avionics system equipped with the minimum required components for an autonomous flight. This paper focuses on the Hardware Design of the Flight Control System and presents specific details of the components and its interface. The system architecture is based on Field Programmable Gate Array and Digital Signal Processor. Employing these two processors in the flight control system would improve the Flight Control System performance in terms of fast sequential processing of high-level control algorithms. In addition to Field Programmable Gate Array and Digital Signal Processor, the flight control computer system will also make use of Global Positioning System and Micro Electro Mechanical System sensors. The project will be implemented using Altera’s System On Programmable Chip builder, currently known as Qsys – Platform Designer implemented in Quartus-II. The system employs Nios-II processor which is 32-bit soft-core embedded-processor architecture designed especially for the Altera’s family of Field Programmable Gate Array. From conceptualization to final design, this paper presents the functionality of the different modulus and complex interfaces employed in this Flight Control System.

The slaughter value of live animals can be assessed during visual conformation scoring, as well as by examining different molecular genetic information, e.g. myostatin gene, which can be re-sponsible for muscle development. In this study F94L, Q204X, nt267, nt324 and nt414 alleles of the myostatin gene were examined in relation to birth weight (BIW), calving ease (CAE), 205-day weaning weight (CWW), muscle score of shoulder (MSS), muscle score of back (MSB), muscle score of thigh (MST), roundness score of thigh (RST), loin thickness score (LTS), and overall muscle development percentage (OMP) of Charolais weaned calves in Hungary. Multi-trait analysis of variance (GLM) and weighted linear regression analysis were used to process the data. Calves carrying the Q204X allele in heterozygous form achieved approximately 0.14 points higher MSB, MST and LTS and 1.2% higher OMP and gained 8.56 kg more CWW than their counterparts not carrying the allele (p<0.05). As for the F94L allele, there was a difference of 4.08 kg in CWW of the heterozygous animals, but this difference could not be proved statistically. The other alleles had no significant effect on the evaluated traits.

The main objective of this review is to determine the main risks that agricultural workers are exposed to during pesticide application, which may have a harmful effect on their health and on public health. This systematic review was based on the PRISMA guidelines. A search for articles was conducted in the Medline/PubMed, ScienceDirect, and Web of Science databases. Fifteen articles were selected considering their assessment of agricultural workers' knowledge, perceptions, attitudes, practices, and behaviours, identifying the main risks and risk factors for disease associated with the unsafe handling of pesticides. The main risk factors identified were age, education, pesticide safety training, farming experience, and contact with other farmers/intermediaries resulting in pesticide access. The most frequent risk behaviours were: application of pesticides without personal protective equipment (PPE), incorrect disposal of empty packaging and waste, and undervaluation of label information, as well as other unsafe practices. A multidisciplinary and more effective training must be delivered in order to enhance pesticide safe usage. This will empower workers to adopt more conscious and safer behaviours while using pesticides.

Compared to other 2D materials, MBenes are at an early stage in both experimental and theoretical approaches. However, the wide range of possible 2D structures leads to novel and challenging properties and their consequent applications. From all the possible stoichiometries, we have performed a theoretical study of orthorhombic and hexagonal M2B2 MBenes in the framework of the Density Functional Theory. We have found that both symmetries of Cr2B2, Fe2B2, and Zr2B2 show a metallic behavior and could be grown under certain conditions, as they are demonstrated to be dynamically stable. Moreover, the values of the magnetic moment, in specific ferromagnetic cases exceeding 2.5 μB/M2B2, make them suitable as robust 2D magnets. All our findings represent an important step in the understanding of MBenes and open several windows to future research in fields like energy conversion and storage, sensing, catalysis, biochemistry, or nanotechnology, among others.

The purpose of this original study is to critically analyze the emergence and development of the national models of financial regulation; international standards and codes; regional and national financial regulation and supervision (the case of UK, USA, Sweden, EU and Finland). The research raises both academic and regulatory concerns. It aims at shaping changes (innovations) in the supervisory practices of national and international regulators in response to new developments in FinTech markets, digital products, financial instruments and risks. Secondly, it will stimulate more systematic work on regulatory databases, registration and reporting procedures in various economies in different financial markets. The author identifies five main systems of national financial regulatory markets: the multi-tiered, multi-agency US system; the Twin Peaks model (UK); the mega-regulatory model (Sweden). There is a thorough review of international standards and institutions that work for the stability of financial systems. The analysis of regional and national systems of financial regulation and supervision is based on the examples of the EU and Finnish institutions. National macro and microeconomic regulation and supervision have been examined with a focus on the US Federal Reserve and the US Treasury. National and international regulatory institutions have been evolving along several lines. First, minimum capital and credit risk requirements for banks (80s of the 20th century) are complemented in the 21st century by buffer reserves, liquidity and leverage standards. Second, regulation focuses on ensuring the sustainability of the national economy. The regulatory focus is on ensuring the sustainability of national and global financial systems. Third, there is an increase in the number of supervised institutions. Fourth, there is a division of functions between central banks (macroeconomic regulation) and one or two mega-regulators (microeconomic regulation and supervision). Fifth, there is a division of labour between the international financial institutions (BIS, IMF, WB) and national regulators. Sixth, the focus is on protecting consumers and investors, and countering money laundering and the financing of terrorism. Seventh, there is an understanding for a common approach by central banks to new financial technologies and cybersecurity.

The Epidermal Growth Factor Receptor (EGFR) overexpression or its mutation mediates the sustaining proliferative signaling in cancers. Human EGFR-targeting monoclonal antibody (mAb) therapy such as cetuximab has been approved for clinical use in patients with colorectal cancers and head and neck squamous cell carcinomas. A reliable preclinical mouse model is essential to further develop the mAb therapy against EGFR. However, a mAb against mouse EGFR (mEGFR) for flow cytometry has not been established. In this study, we developed a specific and sensitive mAb for mEGFR using the Cell-Based Immunization and Screening (CBIS) method. The established anti-mEGFR mAb, EMab-300 (rat IgG1, kappa) reacted with mEGFR-overexpressed Chinese hamster ovary-K1 (CHO/mEGFR) and endogenously mEGFR-expressed cell lines, including NMuMG (a mouse mammary gland epithelial cell) and Lewis lung carcinoma cells by flow cytometry. The kinetic analysis using flow cytometry indicated that the dissociation constant (KD) of EMab-300 for CHO/mEGFR and NMuMG was 4.3 × 10−8 M and 1.9 × 10−8 M, respectively. These results indicated that EMab-300 applies to the detection of mEGFR by flow cytometry, and is expected in the use of preclinical study.

Background: Sinonasal squamous cell carcinoma (SNSCC) is rare in the general population. No clear and consistent etiologic correlation between human papillomavirus and SNSCC has yet been delineated in literature. p16 is a tumour suppressor protein used as a surrogate marker for HPV. This study aims to evaluate the relationship between p16 overexpression in SNSCC and its role in prognosis and survival. Methods: A population-based retrospective analysis was performed using prospectively collected data from the Northern Alberta Head and Neck Tumour Board, Alberta Cancer Registry, and Alberta Cancer Research Biobank. p16 overexpression was analyzed from pathologic sample of patients meeting study criteria, and participants were dichotomized by status. Subsequently, nonparametric analysis of demographics, initial staging, and initial treatment were performed, and a Kapan-Meier curve was developed to assess differences in survival. Results: 16 patients were included in analysis. p16 overexpression was seen in 68.8% of patients. p16 positive and negative groups were comparable for age, gender, smoking status, stage, and treatment. A statistically significant five-year survival advantage was observed in patients with p16 positive SNSCC (p = 0.013). Conclusions: This is the first Canadian study to demonstrate a high prevalence of p16 positivity in SNSCC and its presence denoting a statistically significant survival advantage. Results demonstrate a previously unconfirmed role of oncogenic HPV in SNSCC.

It is currently difficult to obtain accurate fine dust information in residential areas due to the insufficient number of air quality monitoring systems and spatial imbalances. Therefore, a detailed particulate matter dispersion model including factors such as land use and meteorological information was developed in this study and used to create fine dust concentration distribution maps. The fine dust concentration distribution maps currently available to citizens were compared with those obtained by dispersion modeling, and population distribution data were employed to compare the populations exposed to fine dust according to the two methods. The results of the existing method and the developed particulate matter dispersion model differed significantly. For instance, the PM2.5 concentrations in Daejeon, South Korea, on February 17, 2018, were 56% “Good” and 44% “Moderate,” according to the existing method, while they were 31% “Good,” 26% “Moderate,” 28% “Unhealthy,” and 15% “Very Unhealthy,” according to the dispersion model. Furthermore, the existing method indicated that no portion of the population was exposed to poor fine dust concentrations, while the proposed model revealed that over 170 thousand people were exposed to such concentrations. These results on fine dust distributions will contribute to sustainable urban and environmental planning.

Consumer IoT (CIoT) manufacturers seek customer feedback to enhance their products and services, creating a smart ecosystem like a smart home. Due to security and privacy concerns, Blockchain-based federated learning (BCFL) ecosystems can let CIoT manufacturers update their Machine Learning (ML) model using end-user data. FL uses privacy-preserving ML techniques to forecast customers' needs and consumption habits, and blockchain replaces the centralised aggregator to safeguard the ecosystem. However, Blockchain technology (BCT) struggles with scalability and quick ledger expansion. In BCFL, local model generation and secure aggregation are other issues. This research contributes a novel architecture emphasising Gateway Peer (GWP) in blockchain network to resolve scalability, ledger optimisation and secure model transmission issues. In the architecture we replace the centralised aggregator by the blockchain network, while GWP restricts the number of local transactions to execute in BCN. Considering the security and privacy of FL processes, we have added differential privacy and advanced normalisation techniques to ML processes. The approaches strengthen end-users' cyber security and encourage the adoption of technological innovation standards by service providers. The proposed approach has been tested extensively using a well-respected Stanford Cars dataset. We experimentally demonstrate that the proposed architecture makes the network scalable and optimises the ledger significantly. In addition, the normalisation technique outperforms batch normalisation when features are under DP protection.

Thymidylate synthase (TYMS) is an essential enzyme for the de novo synthesis of dTMP and has been a primary target for cancer chemotherapy. Although the physical structure of TYMS and the molecular mechanisms of TYMS catalyzing the conversion of dUMP to dTMP have been conducted thorough studies, oligomeric structure remains unclear. Here, we show that human TYMS not only exists in dimer but also octamer by intermolecular Cys43-disulfide formation. We optimize the expression condition of recombinant human TYMS using Escherichia coli system. Using HPLC-MS/MS, we show that purified TYMS has catalytic activity for producing dTMP. In the absence of reductant β-mercaptoethanol, SDS-PAGE and size exclusion chromatography (SEC) showed size of TYMS protein is about 35 KDa, 70 KDa, and 280 KDa. While the Cys43 was mutated to Gly, the band of ~280 KDa and the peak of octamer disappeared. Therefore, TYMS was determined to form octamer, dependent on the presence of Cys43-disulfide. By measuring Steady-State Parameters for monomer, dimer and octamer, we found the k_cat of octamer is increased slightly than monomer. On the basis of these findings, we suggest that octamer in the active state might have a potential influence on the design of new drug targets.

In this work we offer a broad overview of the combination of digital communication, education and society and show the link between learning with digital and awakening to the future. We trace the effects of digital communication acquired during postgraduate training at the Universidade Aberta of Portugal by professionals from African Portuguese-speaking countries. From a methodological point of view, the study identifies former postgraduate students at the Universidade Aberta (Public University of Higher Education) over the last five years who were given a comprehensive questionnaire aimed at finding out how the training they underwent contributed to gauging their current levels of application of digital communication in their current profession. We found that digital communication in learning and its diversification acts as a lever for personal and professional development following the acquisition of academic knowledge.

As neck and/or shoulder pain (NSP) frequently occur together with tension-type headache (TTH) and migraine, we explored how concomitant NSP affects perceived treatment responses to an analgesic. An anonymous survey was performed among 895 TTH and migraine sufferers who used the analgesic 400 mg ibuprofen/100 mg caffeine. NSP was relatively abundant among patients (42.4% for TTH; 39.2% for migraine), and associated with &gt;1 additional day with headache per month. Reported pain reduction was independent from NSP for TTH and migraine. More patients became pain-free at 2 h in migraine with NSP (42.9%) compared to migraine without NSP (32.2%), which is different from TTH with NSP (60.6%) and TTH without NSP (71.4%). For both, migraine and TTH, a recurrence of headache on the same day was more prevalent in those with concomitant NSP leading to a greater likelihood of taking a second dose of the analgesic. NSP frequently occurs together with TTH and migraine patients. In migraine, NSP seems to be associated with a better treatment response at 2 h. The more frequent recurrence of pain in those with concomitant NSP indicates that NSP makes both headache types worse. Further studies are needed to substantiate these effects.

Background: Preterm birth is a major cause of morbidity and mortality in infants and children. Non-invasive methods for screening the neonatal immune status are lacking. Archaea, a prokaryotic life domain, comprise methanogenic species that are part of the neonatal human microbiota and contribute to early immune imprinting. However, they have not yet been characterized in preterm neonates. Objective: To characterize the gut immunological and methanogenic Archaeal (MA) signature in preterm neonates, using the presence or absence of atopic conditions at the age of 1 year as a clinical endpoint. Methods: Meconium and stool were collected from preterm neonates and used to develop a standardized stool preparation method for the assessment of mediators and cytokines and characterize the qPCR kinetics of gut MA. Analysis addressed the relationship between immunological biomarkers, Archaea abundance, and atopic disease at age 1. Results: Immunoglobulin E, tryptase, calprotectin, EDN, cytokines, and MA were detectable in the meconium and later samples. Atopic conditions at age 1 year were positively associated with neonatal EDN, IL-1β, IL-10, IL-6, and MA abundance. The latter was negatively associated with neonatal EDN, IL-1β and IL-6. Conclusion: We report a non-invasive method for establishing a gut immunological and Archaeal signature in preterm neonates, predictive of atopic diseases at the age of 1 year

Controlling CD4+ immune cells infiltration of the brain is a leading aim in designing therapeutic strategies for a range of neuropathological disorders such as; multiple sclerosis, Alzheimer and depression. CD4+ T cells are a highly heterogeneous and reprogrammable family, that includes various distinctive cell types such as Th17, Th1, and Tregs. Interestingly Th17 and Tregs share a related transcriptomic profile, where the TGFβ-SMADS pathway plays a fundamental role in regulating the differentiation of both of these cell types. However, Th17 could be highly pathogenic and was shown to promote inflammation in various neuropathological disorders. Conversely, Treg is anti-inflammatory and is known to inhibit Th17. It could be noticed that Th17 frequencies of infiltration of the blood-brain barrier (BBB) in various neurological disorders are significantly upregulated. However, Treg infiltration numbers are significantly low. The reasons behind these contradicting observations are still unknown. In this perspective, we propose that the difference in the TCR repertoire diversity, diapedesis pathways, chemokine expression and mechanical properties of these two cell types could be contributing to answering this intriguing question.

In recent years supply chains have evolved into huge ecosystems, demanding trust, provenance, and data privacy. Since blockchain technology (BCT) allows for the development of a distributed environment, it is ideal for supply chain management (SCM) applications. However, concerns regarding data privacy have impeded the development of blockchains. Despite the fact that some blockchains can restrict participants to read and write data, the blockchain’s transparency makes protecting sensitive data challenging. To solve the data privacy challenge, this paper proposes a framework, AccessChain, that is an SCM access control framework based on an attribute-based access control (ABAC) model that restricts access to competing parties while allowing for network scalability. This proposed AccessChain model has two types of ledgers in the system: local and global. Local ledgers are used to store business contracts between stakeholders and the ABAC model management, whereas the global ledger is used to record transaction data. AccessChain can enable decentralized, fine-grained and dynamic access control management in SCM when combined with the ABAC model and BCT. This paper’s experimental results illustrate that high throughput can be achieved in a large-scale request environment while maintaining data privacy and sustaining a scalable network.

Rotary drilling for oil and natural gas uses drilling fluid for lubrication of the bit, to seal off unstable shale layers, and floating out rock cuttings. Drilling fluid is a water-clay chemical mixture. Produced water is a water-sand chemical mixture. Land farming is a common disposal technique of drilling fluid and produced water. In the land farming process, amendments of fluid are repeatedly applied to the soil surface. Plant growth and soil chemical properties may be altered by additions of drilling fluid, because of alkalinity, salinity, trace elements, and petroleum residue contained in waste. The objective of this study was to determine the change in soil pH, electrical conductivity (EC), total nitrogen and carbon, and extractable nutrient levels following the land application of drilling fluid and produced water. The study was a comparison of three plots with similar soil properties and conditions. The three study plots had various levels of drilling fluid and produced water applications. The data show a major difference from field-to-field for EC, Na, and Cl levels. The EC and salt levels increased with additional applications of drilling fluid and produced water. The percent total nitrogen values and plant available P levels were very low in all fields. High EC and salt values, coupled with low N and P levels, would be detrimental to plant growth and development. To successfully vegetate this land-farm site, application of N and P fertilizer would be required. This study will help to give a better understanding of practical ways to land-farm drilling fluid and produced water in a fashion that both minimizes environmental issues and is economically feasible. Salinity changes to soil were expected to be high; there are excessive amounts of sodium and chloride in spent drilling fluid and produced water.

The article proposes an indirect measurement method based on a dimensional and shape analysis of forgings for the evaluation of the manufacture and the proper operation of the key elements of the crank press, in which after modernization, a quick tool assembly based on SMED (Single Minute Exchange of Die) was implemented. As a result of the introduced changes aiming at improving the forging aggregate and increasing the production efficiency, errors were observed on the manufactured products-forgings in the form of twists and joggles. The preliminary analysis showed that they can be clearances and dynamic deformation in the kinematic chain, the occurrence of side forces during automatic forging of the forging in a two-component system (a long, thin element), as well as the design and construction errors in the joining of the SMED instrument with the table tops of the press. In order to solve the presented problem, in the first place, a separate dimensional and shape analysis was made of selected elements of the press and the instrumentation with the use of the 3D scanning method with the purpose to analyze the construction tolerances of the key elements of the press geometry. Next, an evaluation of the effect of clearances and dynamic deformations of the press as well as the force distribution during the forging process was made through numerical modelling. Despite all of the above, such an approach did not make it possible to solve the problem. A proprietary method with the use of 3d reverse scanning was proposed, which allowed to solve the problem of forgings errors. Based on the measurement results and analyses for a few variants of production cycles the necessary changes was obtained, making it possible to minimize the errors and obtain proper products in respect of geometry and quality.

The Bacillus Calmette-Guerin vaccine (BCG vaccine) designed to prevent tuberculosis in children has been shown to induce a trained immune response in the body to fight against bacteria as well as other parasites and viruses. This knowledge has been reciprocated to generate the idea that this vaccine can also offer protection against severe acute respiratory syndrome coronavirus-2 (SARS-COV-2). Some recent pre-print articles have highlighted that countries with mass BCG immunizations seems to have a lower incidence of coronavirus disease 2019 (COVID-19) compared to those without BCG immunization. There are yet no experimental proof of any such association and the world health organisation (WHO) is currently testing the theory with clinical trials on selected cohorts. Epidemiologists and other scientific experts has expressed both their hope and concern simultaneously regarding the success theory of BCG vaccination to prevent COVID-19. Though its still not verified in any way whether the BCG vaccination can actually prevent COVID-19 or not but we believe a thorough analytical research in this regard is indeed worth a shot.

It is demonstrated in this study that PhabrOmeter creates genuine wrinkle on fabrics comparable to that in AATCC specifications, and measures fabric wrinkle recovery values fast with repeatable and reliable results with high resolution, over wide range of fabric types. It thus provides an appealing alternative to the existing test methods that are known to be slow, insensitive and unreliable. In addition, with enormous varieties of fabrics, we used a new criterion termed fabric linear density λ so that fabrics can in general be divided into relatively homogeneous groups for further study. The calculation and application of this parameter are showed in this report.

Most of the structures in flowing water are a challenge to their stability and sustainable with different flow conditions. Recent, renewable energy research and development covers ocean and river energy platform in which flow of water drag considered in various conversion devices towards the offshore and onshore establishment. Various energy platforms have been suggested for offshore development. However, the stability of these platforms in water is a serious concern. To study the water interaction over circular and square cross-section cascade system under the water has been carried out. Water flow around the pillars or column of the energy platform are analyzed through simulation software. Very low velocity 0.5 m/s has been considered to analyze the system. Total fifteen numbers of cascade pillars having circular and square cross-section area were considered. K-ε turbulence model is adopted to calculate the flow interaction to the column. A velocity, pressure, and energy fields are found around the column.

The research investigated the relationship between burnout syndrome and the variables of mental resilience and quality and enjoyment of life, in Greek private and public sector workers (N=112), with demographic differences. Data were collected through a structured questionnaire which was distributed in the form of an electronic Microsoft forms. The questionnaire contained demographic questions, the psychometric tool Burnout Assessment Tool version 2.0 (Schaufeli et al., 2019), the psychometric tool Brief Resilience Scale (BRS) (Smith et al., 2008), and the psychometric tool Quality of Life Enjoyment and Satisfaction Questionnaire (Q-LES-Q) (Endicott et al., 1993) which were used to measure the three variables examined by the research. For statistical analysis, Pearson and Spearman correlation coefficients were used to test the relationship between two quantitative variables, while linear regression analysis was used to find independent factors. The main research hypothesis was verified, finding a negative correlation between burnout and the variables of mental resilience and quality of life, while it was identified that employees experienced greater exhaustion and spiritual withdrawal compared to freelancers. Hypotheses regarding age, educational level, and public-private job data were not verified as there were no statistically significant differences in demographic results.

Due to the growing demand for Medicinal and Aromatic Plants (PAMs), environmental risks associated with overexploitation and inadequate waste management are increasing. Since MAPs residues have a notable potential to be valorised, the implementation of Circular Economy solutions can play a central role in transforming waste management problems into economic opportunities and in responding to the growing demand for MAPs. Circular economy is viewed as a solution for fostering a sustainable system planet and positively contributes to the economy and society. A systematic review was conducted aiming to identify potential applications for the valorisation of MAP, under a sustainable waste management and circular economy approach. A total number of 47 studies were analysed and it was verified that MAPs residues can be valorised for energy purposes, crop management and applications in chemical, food, pharmaceutical, cosmetic industries, among others. Despite the wide range of possible applications, to promote a progressive implementation of circular economy strategies by the industry, further investigation is needed regarding the development of more efficient techniques and technology to develop value-added products and the assessment of sustainable performance in empirical investigations, considering both economic and environmental indicators.

Traditionally Moringa is known as mystical miracle tree or the tree of life. Soup can be classified as an appetizer, warm food during cold and sick. Moringa oleifera pods have been procured from College of Agriculture, JNKVV, Jabalpur. The present investigation is planned with objectives to standardize best combination of for the development of instant soup mix, to evaluate various quality parameters, to evaluate the storage stability and cost estimation of product. Protein in instant soup is ranged from 9.76 to 11.89 percent in different formulations of instant soup mix. Formulation MPP4 (11.89) had significantly maximum protein content followed by MPP3, MPP2, MPP1 and Control with the minimum protein content. The original instant soup mix (control) exhibited highest carbohydrate content (61.52%) followed by MPP1, MPP3, MPP4, and MPP2 with lowest content. The evaluated scores of control for colour and appearance, taste, flavour, consistency, after taste and overall acceptability are 8.36, 8.50, 8.60, 8.90, 8.76 and 8.63 respectively

Migraine is one of the leading causes of disability worldwide [1,2]and patients with acute migraine frequently present to emergency departments (ED)[3]. The current literature suggests that ED treatment of migraine headache varies across institutions [4-7]. Considering this, we conducted a scoping review to summarize trends in medication prescribing patterns for acute migraine treatment in the ED setting. Trends were evaluated for factors influencing treatment choices, with particular attention placed on opioids and migraine specific therapy. This scoping review was based on the Arksey and O'Malley methodological framework[8]and included studies published between 1 January 2000 until 31 May 2020. 14 publications met the inclusion criteria. The most common classes of medication prescribed were often anti-emetics or Non-steroidal anti-inflammatory drugs (NSAID), but rates varied between studies. There was a concerning trend towards an underutilization of triptans and overutilization of opiates. The use of specific clinical goals of treatment (e.g. two-hour pain free freedom response) was also not evident. Additionally, 88% (n=8) of the 9 studies commenting on adherence to hospital or evidence-based guidelines stated that practices were non-adherent. Overall, the reviewed literature reveals treatment practices for acute migraine in the ED are heterogeneous and deviate from established international recommendations.

700 MPa grade Ti and Nb-Ti microalloyed steels produced by thermo-mechanical control rolled processes (TMCP) were studied to elucidate texture that contributes to delamination and consequent impact toughness. The microstructure of Ti and Nb-Ti steels consisted of ferrite and bainite. Compared with Ti steel, Nb-Ti steel was characterized by a microstructure with finer ferrite and more bainite. The results from tensile and impact tests indicated that there is insignificant change in tensile properties, but toughness was greater in Nb-Ti steel compared with Ti steel. More severe delamination in Nb-Ti steel is attributed to stronger α-fiber (RD ||<110>) texture than Ti steel, especially {100}<110>, {113}<110> and {112}<110> texture. Typical cleavage river patterns were not observed on delaminated fracture surface, instead the cleavage fracture surface indicated some dimples. Interestingly, the impact energy of samples with delamination was greater than samples without delamination in the ductile–brittle transition region. The study suggests that delamination in the ductile–brittle transition zone may also be representative of high toughness.

A proper transmission of the orientation between surface and underground workings, by means of vertical shafts, is an important challenge in the mining industry, especially when the mine exceeds 200 meters deep. In fact, this study is developed in a mine located to 700 meters deep. Likewise, this paper assesses the accuracy of this operation, in a case study, using the two shafts plumbing and gyroscope methods in order to compare and analyse the planimetric displacement of the base line due to different source of errors in each one. Upsides and downsides of both methods are analysed in the paper. Some disadvantages in each method have been reduced thanks to the technological progress, especially in the two shaft plumbing method. The different sources of error that affect the measures are thoroughly analysed in the study with the aim to compensate them and achieve the required precision for an underground infrastructure. Mine ventilation has been found as one of the most important sources of error in the plumbing method due to intake and return airflow. In this direction, the paper unfolds some measures to reduce the ventilation influence and details a compensation method to reduce ventilation errors.

Soil washing is a rapid and efficient method for heavy metals removal. In this study, in order to prove the feasibility of leaching remediation technology for remediation of lead-contaminated soil around a smelter, intermittent oscillating washing tests and extensive continuous tests were conducted to remediate Pb contaminated soils. Plant growth tests with wheat (Bainong Aikang 58) were also conducted to investigate the effects of leaching on plant growth and the Pb content of stems and leaves. The results revealed that in soils, Pb mainly exists in the forms of PbCO3, Pb5(PO4)3Cl2, PbSO4, and in small amounts of PbS. The intermittent oscillating washing tests showed that a lower liquidsolid(L/S) ratio and a higher leaching temperature and time were related to increased Pb removal efficiency. The Pb removal efficiency rates in the oscillating washing tests and the extensive continuous tests were 72.50% and 69.94%, respectively. In addition, the chemical and physical characteristics of the soil were basically unchanged after the leaching regimes. The results of the plant growth tests showed that the leaching regimes did not have a negative effect on the survival rate and growth of the wheat, and the heavy metal contents of the stem and leaf were effectively reduced. This study provides a reference for the large-scale remediation of contaminated soils.

Desertification is impeding the implementation of reforestation efforts in Mongolia. Many of these efforts have been unsuccessful due to lack of technical knowledge on water and nutrient management strategies, limited financial support, and short-lived rainfall events. We investigated the effects of irrigation and fertilization on the morpho-physiological traits of Populus sibirica Hort. Ex Tausch and Ulmus pumila L. and to suggest irrigation and fertilization strategies for reforestation. Different irrigation and fertilizer treatments were applied: no irrigation, 2 L h-1, 4 L h-1 and 8 L h-1 of water; no fertilizer, 2 L h-1 + NPK, 4 L h-1 + NPK, and 8 L h-1 + NPK; and no compost, 2 L h-1 + compost, 4 L h-1 + compost, and 8 L h-1 + compost. The leaf area (LA) and specific leaf area (SLA) of both species responded positively to 4 L h-1 and/or 8 L h-1. Results also showed that the addition of either NPK or compost to 4 L h-1 and/or 8 L h-1 irrigation resulted in a higher LA, SLA, and leaf biomass (LB). Total chlorophyll content decreased with irrigation in both species. The same pattern was detected when a higher amount of irrigation was combined with fertilizers. Lastly, we found that both diurnal and seasonal leaf water potential of plants grown in 4 L h-1 and/or 8 L h-1 were significantly higher than in control plots. Therefore, 4 L h-1 and/or 8 L h-1 with either NPK or compost has shown to be the optimal irrigation and fertilization strategy for the species in an arid and semi-arid region of Mongolia. Results should provide us with a better understanding of tree responses to varying amounts of irrigation with or without fertilizer in pursuit of sustainable forest management in arid and semi-arid ecosystems.

More water utilities are adopting Aquifer Storage and Recovery (ASR) to balance long-term water supply and demand. Due to large implementation and operation costs, ASR projects need to be optimized, particularly for energy use, which is a major operating expense. This study examines the relationships among energy use, recharge, and recovery at two ASR projects in the western United States. The major finding is an economy of scale for recovery processes, but not for gravity-fed recharge processes. The economy of scale found is as follows: the energy intensity recovered decreases with volume. This suggests it is more energy-efficient to recover large volumes of water in one interval instead of recovering smaller volumes at more frequent intervals. The H2Oaks recovery process experienced a 78% decrease in energy intensity from 0 to 50,000 m3 recovered, while the Sand Hollow site experienced a 43% decrease in energy intensity from 0 to 50,000 m3 recovered. Statistical analyses of the recovery process showed p values lower than 0.0001, R2 values between 0.43 and 0.57, and a RMSE value between 0.55 and 2.1, indicating the presence of a moderate correlation between energy and volume. This economy of scale has been observed in multiple instances in water and wastewater treatment. This finding not only has applications to ASR but also all recovery or recharge wells, whether or not they are paired with each other. Furthermore, this study confirms the need for more reliable and accessible energy data to fully understand the implications of the energy–water nexus.

Untargeted and targeted approaches are the traditional metabolomics workflows acquired for a wider understanding of the metabolome under focus. Both approaches have their strengths and weaknesses. The untargeted, for example, is maximizing the detection and accurate identification of thousands of metabolites, while the targeted is maximizing the linear dynamic range and quantification sensitivity. These workflows, however, are acquired separately, so researchers compromise either a low-accuracy overview of total molecular changes (i.e., untargeted analysis) or a detailed yet blinkered snapshot of a selected group of metabolites (i.e., targeted analysis) by selecting one of the workflows over the other. In this review, we present a novel single injection simultaneous quantitation and discovery (SQUAD) metabolomics that combines targeted and untargeted workflows. It is used to identify and accurately quantify a targeted set of metabolites. It also allows data retro-mining to look for global metabolic changes that were not part of the original focus. This offers a way to strike the balance between targeted and untargeted approaches in one single experiment and address the two’s limitations. This simultaneous acquisition of hypothesis-led and discovery-led datasets allows scientists to gain more knowledge about biological systems in a single experiment.

Xylitol is an organic, non-toxic, biosourced phase change material with high potential for seasonal thermal energy storage material. It has a high energy density, a high and stable undercooling allowing storing solar energy at ambient temperature thus, reducing thermal losses and the risk of spontaneous nucleation (i.e., the risk of losing the stored energy). When the energy is needed, the discharge triggering of the storage system (i.e., Nucleation triggering of highly viscous undercooled Xylitol) is very difficult as well as reaching a sufficient power delivery (i.e., the control of the subsequent crystal growth rates). Both are the mains locks for the use of Xylitol in seasonal energy storage. Different techniques to crystallize highly undercooled Xylitol have hence been considered. It has been proven that nucleation triggering of highly undercooled Xylitol using an air lift reactor would allow reaching performances matching with building applications (i.e., at medium temperatures, below 100 °C). The advantages of this technique compared to other existing techniques to activate the crystallization are discussed. The mechanisms triggering the nucleation are investigated. The air bubble generation, transportation of nucleation sites and subsequent crystallization are discussed to improve the air injection operating conditions.

Soils harbor diverse bacteria, and these bacteria play important roles in soil nutrition cycling and carbon storage. Numerous investigations of soil microbiota had been performed, and the core microbiota in different soil or vegetation soil types had been described. However, the complexity of soil environments and relatively limited information of many geographic areas had attracted great attention on comprehensive exploration of soil microbes in enormous types of soil. To reveal the core soil microbiota in Huabei plain, soil samples from metropolis and countryside regions in the Huabei plain were investigated using high-throughput sequencing strategy. The results showed that the most dominant bacteria are Proteobacteria (38.34%), Actinobacteria (20.56%), and Acidobacteria (15.18%). At the genus-level, the most abundant known genera are Gaiella (3.66%), Sphingomonas (3.6%), Acidobacteria Gp6 (2.1%), and Arthrobacter (2%). Moreover, several dominant operational taxanomy units (OTU), such as OTU_3 and OTU_17, were identified to be associated with the soil environment. Microbial distributions of the metropolis samples were different from the countryside samples, which may reflect the environments in the countryside were more diverse than in the metropolis. Microbial diversity and evenness were higher in the metropolis than in the countryside, which might due to the fact that human activity increased the microbial diversity in the metropolis. The soil core microbiota of the Huabei plain were complex, and microbial distributions in the Huabei plain might be mainly affected by the human activity and environmental factors, not by the distance. Our data highlights the soil core microbiota in Huabei Plain, and provides insights for future soil microbiota distribution studies in central China.

Strigolactones (SLs) are a novel emerging plant hormones, which play important roles in regulating plant organ development and environmental stress tolerance. Even though the SL related genes have been identified and well characterized in some plants. The information of SL related genes in soybean is not fully established yet, especially in response to salt stress. In this study, we identified nine SL biosynthesis genes: two D27, two CCD7, two CCD8, and three MAX1, and seven SL signaling genes: two D14, two MAX2 and three D53 in soybean genome. We found that SL biosynthesis and signaling genes are conserved during evolution in different species. Syntenic analysis of these genes revealed their location on nine chromosomes as well as existence of ten pairs of duplication genes. Moreover, plant hormone and stress-responsive elements were identified in the promoter regions of SL biosynthesis and signaling genes. By using quantitative real-time PCR (qRT-PCR), we confirmed that SL genes have different tissue expression in roots, stems and leaves. Further, we also explored the expression profiles of SL biosynthesis and signaling genes under salt stress. These results suggested that SL signaling genes may play important regulatory roles in response to salt stress. In conclusion, we identified and provided valuable information on the soybean SL biosynthesis and signaling genes, and established a foundation for further functional analysis of soybean SL related genes in response to salt stress.

Antimicrobial peptides (AMPs) are essential components of the innate immune system, present across a spectrum of organisms. Their versatility lies in their ability to effectively inhibit a wide range of pathogens including bacteria, fungi, parasites, and viruses. As the challenge of antibiotic resistance escalates and concerns surrounding antibiotic use grow, AMPs have emerged as promising alternatives. Their applications span diverse domains such as medicine, agriculture, food production, animal husbandry, and aquaculture, primarily due to their efficacy against resistant pathogens, signifying their crucial role in combating infections. Beyond their antimicrobial properties, research illuminates their intricate involvement in the immune response network. These peptides impact crucial processes including cytokine release, chemotaxis, wound healing, angiogenesis and the activation of the adaptive immune system. This comprehensive review delves into the multifaceted realm of AMPs, encompassing their classification, varied applications across industries and notably, their significance in diverse disease conditions like infections, skin diseases, cancer, oral diseases, lung diseases and cardiovascular ailments. Special attention is directed towards current advancements in clinical applications of peptide-based therapeutics, offering invaluable insights into their potential future integration within clinical settings.

Due to the high specific surface area of titanium aluminide powders, significant and unavoidable surface oxidation takes place during processing. The resulting oxides disrupt the conventional powder metallurgical process route (pressing and sintering) by reducing green strength and sintered properties. Oxide-free particle surfaces offer the potential to significantly increase particle bond strength and enable the processing of difficult-to-press material powders. In this work, the effect of milling titanium aluminide powder in a silane-doped atmosphere on the component properties after pressing and subsequent sintering was investigated. Ball milling was used to break up the oxide layers and create bare metal surfaces on the particles. With the help of silane-doped inert gas, the oxygen partial pressure was greatly reduced during machining. It was investigated whether oxide-free surfaces could be produced and maintained by milling in silane-doped at-mospheres. Furthermore, the resulting material properties after pressing and sintering were an-alyzed using density measurements, hardness tests, EDX-measurements and micrographs. It was concluded, that ball milling in a silane-doped atmosphere produces and maintains oxide-free particle surfaces. These oxide-free surfaces and smaller particle sizes improve the component properties after pressing and sintering.

The paper proposes, through an experimental method, a conceptualisation of theoretical-methodological and practical guidelines for the project on the system of collective open spaces, residual areas, abandoned areas that characterise the contemporary city, both in the urban contexts of the historical city, and in the more marginal areas of the modern suburbs. This methodology was experimented on an historical neighbourhood in Rome (San Lorenzo discrict) starting from the results of some researches conducted in collaboration between Sapienza University of Rome and the Escuela de Architettura, Universidad San Jorge and some design experiments conducted by Gràvalosdimonte design studio. This methodology and experimentation combines the theme of the inter-scalarity of the project (territorial, urban and local scale) with the themes of the flexibility and proximity of functions with respect to local instances and contingencies caused by the pandemic situation and by the sustainability perspectives, with particular reference to the need for urban health, the dialectic between public and private space in the perspective of the notion of common good, the bottom-up project for the construction of proximity spaces and plurality in the decision-making process.

Particle layers employing conductive transition metal nitrides have been proposed as possible alternative plasmonic materials for photovoltaic applications due to their reduced losses compared to metal nanostructures. We critically compare the photocurrent gain due to an additional layer made of nanopillars of nitrides with other material classes obtained in an already highly optimized doped c-Si baseline solar cell with accurate doping profile from measurements. A relative photocurrent gain with respect to the baseline cell of on average 5% to 10% is observed, with a few cases achieving around 30% gain. While the local field enhancement is moderate resonances for nitrides spread over the whole UV-VIS range. For some nitrides, the shading effect remains a problem similar as for metals, but others behave more like dielectric scatterers with high photocurrent gain.

Benzimidazole fungicides are a class of highly effective, low-toxicity, systemic broad-spectrum fungicides developed in the 1960s and 1970s, based on the fungicidal activity of the benzimidazole ring structure. They exhibit biological activities including anticancer, antibacterial, and antiparasitic effects. Due to their particularly outstanding antibacterial properties, they are widely used in agriculture to prevent and control various plant diseases caused by fungi. The main products of benzimidazole fungicides include benomyl, carbendazim, thiabendazole, albendazole, thiophanate, thiophanate-methyl, fuberidazole, carbamic acid, and carbendazim salicylate. This article mainly reviews the physicochemical properties, toxicological properties, and disease control efficacy, and pesticide residue and detection technologies of the aforementioned nine benzimidazole fungicides and their main metabolite (2-aminobenzimidazole). On this basis, a brief outlook on the future research directions of benzimidazole fungicides is presented.

Sea cucumber detection represents a significate step in underwater environmental perception, which is an indispensable part of the intelligent subsea fishing system. However, various complex factors such as water turbidity declines the clarity of underwater images, presenting a challenge to vision-based underwater target detection. Therefore, accurate, real-time and lightweight detection models are required. First of all, the development of subsea target detection is summarized in this presented work. Besides, since target detection methods based on deep learning such as YOLOv5 and DETR, which are respectively examples of one-stage and anchor-free deep leaning methods, have been increasingly applied in underwater detection scenarios. Based on the analysis of state-of-the-art underwater sea cucumber detection approaches and aiming to provide a reference for practical subsea identification, the sea cucumber detection based on the YOLOv5 and DETR are investigated and compared in detail. For each approach, the detection experiment is carried out on the derived dataset which contains a wide variety of sea cucumber sample images. The compared experiments demonstrate that the overall outperformance of YOLOv5 in terms of low computing consumption and high precision, particularly in detection of small and dense features. Nevertheless, the DETR exhibits rapid development and holds promising prospects in underwater object detection applications, owing to its relatively simple architecture and ingenious attention mechanism.

The inter-individual variability of CYP450s enzyme activity may be reduced by comparing the effects of bariatric surgery on CYP-mediated drug elimination in comparable patients before and after surgery. The current research will use a low-dose phenotyping cocktail to simultaneously evaluate the activities of six CYP isoforms and P-gp.The results showed that following weight reduction after surgery, the activity of all enzymes increased compared to the obese period, which was statistically significant in the case of CYP3A, CYP2B6, CYP2C9, and CYP1A2. Furthermore, the activity of P-gp after surgery decreased without reaching a statistical significance (p-value>0.05). Obese individuals had decreased CYP3A and CYP2D6 activity than the control group, albeit only CYP3A was statistically important. In addition, there was a trend to increase activity for CYP1A2, CYP2B6, CYP2C9, and CYP2C19 in obese patients compared to the control group, without reaching statistical insignificance (p-value≥0.05). After six months (at least), all enzymes and the P-gp pump activity were significantly higher than the control group except for CYP2D6.Ultimately, a greater comprehension of phenoconversion can aid in altering the patient's treatment. Further studies are required to confirm the changes in the metabolic ratios of probes after bariatric surgery to demonstrate the findings' clinical application. As a result, the effects of inflammation-induced phenoconversion on medication metabolism may differ greatly across persons and drug CYP pathways. It is essential to apply these results to the clinic to recommend dose adjustments.

Broadband reverse saturable absorption is systematically investigated via Z-scan, transient absorption spectrum (TAS). The excited state absorption and negative refraction of Orange IV are observed in the Z-scan experiment at 532 nm. Meanwhile, two-photon induced excited-state absorption and pure two-photon absorption are observed at 600 nm and 700 nm with the pulse width of 190 fs, respectively. An ultrafast broadband absorption in visible wavelength region is observed via TAS. The different nonlinear absorption mechanism at multiple wavelengths is discussed and interpreted from the results of TAS. In addition, the ultrafast dynamics of negative refraction in the excited state of Orange IV is investigated via degenerate phase object pump probe, from which the weak long-lived excited state is extracted. All studies indicate that Orange IV has the potential to be further optimized into a superior broadband reverse saturable absorption material and also has certain reference significance for the study of optical nonlinearity in organic molecules containing azobenzene groups.

Over the last decades, microalgal biomass has gained a significant role in the development of different high-end (nutraceuticals, colorants, food supplements, and pharmaceuticals) and low-end products (biodiesel, bioethanol, and biogas) due to rapid growth and high carbon fixing efficiency. Therefore, microalgae are considered a useful and sustainable resource to attain energy security while reducing our current reliance on fossil fuels. From the technologies available for obtaining biofuels using microalgae biomass, thermochemical processes (pyrolysis, HTL, gasification) have proven to be processed with higher viability, because they use all biomass. However, the biocrudes obtained from direct thermochemical conversion have substantial quantities of heteroatoms (oxygen, nitrogen, and sulfur) due to the complexity of the biomass's content of chemical components (lipids, carbohydrates, and proteins). As a solution, catalyst-based processes have emerged as a sustainable solution for the increase in biocrude production. This paper's objective is to present a comprehensive review of recent developments on catalyst mediated conversion of algal biomass. Special attention will be given to operating conditions, strains evaluated, and challenges for the optimal yield of algal-based biofuels through pyrolysis and HTL.

This work mainly discusses an innovative teaching platform on Unmanned Aerial Vehicle digital mapping for Remote Sensing (RS) education at Wuhan University, underlining the fast development of RS technology. Firstly, we introduce and discuss the future development of the Virtual Simulation Experiment Teaching Platform for Unmanned Aerial Vehicle (VSETP-UAV). It includes specific topics such as the Systems and function Design, teaching and learning strategies, and experimental methods. This study shows that VSETP-UAV expands the usual content and training methods related to RS education, and creates a good synergy between teaching and research. The results also show that the VSETP-UAV platform is of high teaching quality producing excellent engineers, with high international standards and innovative skills in the RS field. In particular, it develops students' practical skills with technical manipulations of dedicated hardware and software equipment (e.g., UAV) in order to assimilate quickly this particular topic. Therefore, students report that this platform is more accessible from an educational point-of-view than theoretical programs, with a quick way of learning basic concepts of RS. Finally, the proposed VSETP-UAV platform achieves a high social influence, expanding the practical content and training methods of UAV based experiments, and providing a platform for producing high-quality national talents with internationally recognized topics related to emerging engineering education.

This study looked into how financial knowledge and entrepreneurial proficiency affected the performance of small, sustainable businesses. In parallel, we looked at how business resilience mediated the relationship between entrepreneurial proficiency and financial knowledge and long-term company success. Using an offline questionnaire, we employed a quantitative approach to gather data from 275 Indian small company owners. PLS-SEM was used to analyse the data that had been gathered. The findings show that resilience and entrepreneurial ability are very positively impacted by financial knowledge. The business resilience and sustainable performance of Indian SMEs are significantly enhanced by entrepreneurial competencies. Moreover, it was shown that business resilience moderated the influence of financial knowledge and proficiency on sustainable performance among Indian SMEs, while concurrently having a significant impact on sustainable performance. In keeping with India Vision of Viksit Bharat@2047: Crystal Gazing Through MSME Sector, which places a strong emphasis on entrepreneurship and the growth of a financially independent entrepreneurial community, this study helps to open up business options for regional business owners who oversee small businesses. According to the most recent figures (2021–2022) from the Ministry of Statistics & Programme Implementation, MSMEs make up a startling 29.15% of India’s GDP. This indicates their critical significance in the development of the country as it equates to a sizeable portion of the economic pie. In addition to adding to the corpus of knowledge, this research can help policymakers develop relevant plans to motivate SMEs that have been most negatively impacted by the COVID-19 pandemic to operate sustainably. There are also several other ramifications for financial institutions and business owners.

This work simulates the performance of lithium batteries for electric vehicles under different charge and discharge rates. The simulation is based on similarity factors for power, voltage and current, reproducing the real operation conditions of an electric vehicle at the model scale. Most current driving modes have been analysed corresponding to discharge rates from 0.1C to 0.37C. The simulation has also been applied to determine charging time using charge power in real conditions, from 6.1 kW to 18.3 kW (0.1 C to 0.3C). Driving conditions are obtained using equations for vehicle motion including all forces. Tests have been run under two configurations, continuous and alternate current circuits, to reproduce the two types of engines that electric vehicles use. The simulation shows very good agreement in charge and discharge processes, average deviation of 3% related to real conditions, and 1.6% between them, which proves the validity of the simulation process.

Workplace exercise programs are imperative for improving employee health and wellbeing. Employee cognition and productivity can also benefit from such programs; however, the practical application of interventions to influence these outcomes is poorly understood. This research aimed to assess the suitability of a university Staff Fitness Program for improving employee productivity and cognition. Forty-seven participants were included in the study, comprising 27 Staff Fitness participants and 20 control group participants. A two (groups) x three (time-points) between-subjects/within-subjects design was employed over 14 weeks, comprising ten weeks of once-weekly exercise intervention for Staff Fitness participants. All participants completed the Victoria Stroop Colour and Word Test and the Health and Work Questionnaire at each time-point, to assess cognition and productivity, respectively. Participants also completed the International Physical Activity Questionnaire (short form) at time-point one, three and during training weeks (excluding week one) to measure physical activity. Appropriate T-tests and non-parametric equivalents were used to assess group differences in outcome measures and across time-points. There were no significant between group or longitudinal differences indicative of improved productivity or cognition. The Staff Fitness group demonstrated a non-significant improvement (Z = 73.00, p = .055) in physical activity from time-point one (M = 1540.93 MET-min-week, SD = 1083.74) to three (M = 2077.32 MET-min-week, SD = 1401.48) with a large effect size (d = 0.97), while control group physical activity significantly decreased (Z = 10.00, p = .013). The present Staff Fitness Program benefited employees by improving physical activity, despite no improvements in productivity or cognition. Future research should further explore the application of workplace exercise programs and the manipulation of exercise parameters to show improvements in employee productivity and cognition.

The Hollow fiber membrane contactor (HFMC) is an intensification process that combines membrane and absorption technologies, being a technology in expansion, so the dynamics of this process is crucial for an increase in industrial scale-up. In this manuscript a rigorous dynamic model of an HFMC is developed and simulated in Python software for the absorption of post-combustion CO2 using a monoethanolamine (MEA) solution, which was validated using available data in literature in steady state. Dynamic simulations were performed to analyze the model's capability to predict the effect of disturbances on the responses of CO2 capture ratio and loading. Four distinct experiments were conducted by step changes and pulse disturbances at the following variables: gas and liquid volumetric flow rates, CO2 composition in flue gases, and CO2 lean load. The gas phase showed a faster response compared to the liquid. The CO2 capture ratio and rich loading presented opposite responses when disturbing both liquid flows, and for the composition and lean loading variations, the capture ratio presented an inverse response characteristic, while the loading showed a delayed response. As the model proved to be capable of returning to the reference state, it can potentially be used for control studies purposes.

The escalating environmental challenges that stem from urban residential waste in densely populated areas have become increasingly prominent in recent times. As a result, the waste management sector has experienced significant growth nationwide. However, due to the predominantly manual nature of these processes, their effectiveness falls short of meeting the current demand. Addressing these issues requires process enhancement. In this context, Industry 4.0, particularly the concept of Digital Twins, emerges as a potential avenue for refining processes. To tackle both current and future industry challenges, it is imperative to create a comprehensive methodology capable of generating effective solutions within the waste management sector. This paper provides an explanation of digital twins, outlines the methodological framework comprising an architectural structure and layered model, and details a series of sequential methodical stages for implementing digital twins based on the specific scope determined by the end-user. A noteworthy aspect is the transformative potential of digital twins in enhancing efficiency and precision within waste management practices. By providing a virtual real-time representation of the waste management system, digital twins empower simulations and experimentation to fine-tune processes. Furthermore, they facilitate informed decision-making by offering a detailed visualization of the complete system, simplifying the identification of challenges and opportunities for improvement. that this article derives from the presentation titled "Digital Twin application methodology for the improvement of production and service systems. Application to waste management processes" at the "Sustainable Smart Cities and Territories International Conference" held in the city of Manizales, Colombia, from 21st to 23rd June 2023.

COVID-19, the fear it engendered, and the policy measures to manage its spread have disproportionately impacted the wellbeing of children and adolescents (CAs). We present an intensive critical realist case study of the impact of COVID-19 on the health and wellbeing of CAs in Rwanda, seeing it as much a social and political crisis as a medical and public health one. To do this, we carried out interviews with a purposive sample of 25 leaders with a working knowledge of children and young people; they were more likely than the CAs themselves to observe changes across the CA population within their remit and more likely to be looking for general explanations rather than individual experiences. The findings show that CAs' responses to the changes wrought on their lives by Covid-19 were conditioned by their age, gender, social class and if they lived in urban or rural areas. However, Covid19 has not just revealed the structural weakness of the Rwandan health system but of education, social protection, child protection, employment, family, and financial systems. The pathway to (adverse) impacts of COVID-19 on CAs is conditioned by these institutions and their interactions together with structural socioeconomic inequalities both within Rwanda and globally.

Introduction: Uganda has got the highest prevalence rate of malaria among the risk groups compared to other parts of the world. In addition, Uganda bears a particularly large burden from the disease which is limited by a lack of reliable data, but it is clear that the prevalence of malaria infection, incidence of disease, and mortality among pregnant women all remain very high. According to the Iganga DHIS2 Jan-May report, a higher number of pregnant women received Intermittent Preventive Treatment one (IPT1) and the numbers dropped for IPT2 and IPT3. The district is also referral point of the greater Busoga region and has got several challenges towards malaria control. The study aimed at assessing the uptake of Intermittent Preventive Treatment and the prevalence of malaria among pregnant women in Iganga district so as to generate evidence for scaling up appropriate interventions for IPT uptake among pregnant women. Methods: The research was a retrospective study using secondary data to assess the uptake of IPT and prevalence of malaria for financial year 2019/2020 in nine Public Health Centre IIIs and one Public Health Centre IV. In this study IPT was defined as the administration of a curative dose of an effective antimalarial drug to all pregnant women without testing for presence of malaria parasite and at least three doses as recommended. Secondary data from HMIS was obtained and analyzed to assess the uptake of IPT services and the prevalence of malaria among pregnant women was determined using proportions. Results: The study found that of 6,672 women who received the first dose of IPT-SP, 1671 (25%) of the women received less than 2 doses of IPT and 46% of pregnant women received more than 2 doses of IPT. The study showed that a total of 3,435 pregnant women tested positive for malaria which brings the prevalence to 50%, and being highest among pregnant women aged 20-24 years at 50%. Conclusions: The study showed that the uptake of IPT was relatively low among lower age groups with a relatively high prevalence of malaria among the same age group. This calls for all stakeholders (DHO, MOH, Iganga District, NGOs e.t.c) urgent attention thus to ensure mass sensitization about malaria and IPT importance with IEC and ITN distribution, early diagnosis and treatment, giving incentives to ANC attending mothers, control of the vector.

In this work we introduce a novel approach to generate lower and upper L2 estimates for solution derivatives of arbitrary order to a general class of dissipative systems in the case that such estimates are available for the solutions themselves. Our method also works in reverse order: from the L2 estimates of solution derivatives of some (arbitrary) order we can derive lower and upper L2 estimates for the solutions and then to their derivatives of any order. This procedure is based on very simple monotonicity properties combined with standard energy estimates in physical space, following previous ideas of Kreiss, Hagstrom, Lorenz and Zingano. For simplicity, it is applied here in the context of algebraic rates, but the method can be used in other contexts as well (exponential, logarithm, and so forth).

A global event such as the COVID-19 crisis presents new, often unexpected responses that are fascinating to investigate from both, scientific and social standpoints. Despite several documented similarities, the Coronavirus pandemic is clearly distinct from the 1918 flu pandemic in terms of our exponentially increased, almost instantaneous ability to access/share information, offering an unprecedented opportunity to visualise rippling effects of global events across space and time. Personal devices provide “big data” on people’s movement, the environment and economic trends, while access to the unprecedented flurry in scientific publications and media posts provides a measure of the response of the educated world to the crisis. Most bibliometric (co-authorship, co-citation, or bibliographic coupling) analyses ignore the time dimension, but COVID-19 has made it possible to perform a detailed temporal investigation into the pandemic. Here, we report a comprehensive network analysis based on more than 20000 published documents on viral epidemics, authored by over 75,000 individuals from 140 nations in the past one year of the crisis. In contrast to the 1918 flu pandemic, access to published data over the past two decades enabled a comparison of publishing trends between the ongoing COVID-19 pandemic and those of the 2003 SARS epidemic, to study changes in thematic foci and societal pressures dictating research over the course of a crisis.

The purpose of this paper is threefold: (i) to introduce and study the Euler-Lagrange prolongations of flatness PDEs solutions (best approximation of flatness) via associated least squares Lagrangian densities and integral functionals on Riemannian manifolds; (ii) to analyze some decomposable multivariate dynamics represented by Euler-Lagrange PDEs of least squares Lagrangians generated by flatness PDEs and Riemannian metrics; (iii) to give examples of explicit flat extremals and non-flat approximations.

Nanoparticles -- regularly patterned or randomly dispersed -- are a key ingredient for emerging technologies in photonics. Of particular interest are scattering and field enhancement effects of metal nanoparticles for energy harvesting and converting systems. An often neglected aspect in the modeling of nanoparticles are light interaction effects beyond classical electrodynamics stemming from electron dynamics in confined and accelerated systems. We give a detailed account on free electron phenomena in metal nanoparticles and discuss analytic expressions, stemming from microscopic and semi-classical theories. These can improve standard computational schemes to produce more reliable results on the optical properties of metal nanoparticles. We combine these solutions into a single framework and study their joint impact on isolated Au, Ag, and Al nanoparticles as well as dimer structures.

Oral mucositis (OM) is inflammation of the mouth caused by damage to the mucous membranes that line the mouth and throat. It is a side effect of cancer treatment, particularly in patients with head and neck squamous cell carcinoma (HNSCC) who undergo radiotherapy, chemotherapy, and/or immunotherapy with immune checkpoint inhibitors. The etiology and pathogenic mechanisms of OM is complex and multifaceted, involving cytotoxicity (cell death), inflammation, infection, change in microbiome, and immune-mediated cytotoxicity. We summarize the literature about attempts to use various omics methodologies (genomics, transcriptomics, microbiomics and metabolomics) to elucidate the biological pathways associated with the development or the severity of OM. Integrating different omics into multi-omics approaches carries the potential to discover links among host factors (genomics), host responses (transcriptomics, metabolomics), and local environment (microbiomics).

Skin and proximity effects have a considerable impact on current distribution in multi-strand cable lines. Under unfavorable heat exchange conditions some strands may be subject to excessive overheating, what may lead to serious malfunctions or even fires of the installation. The paper proposes a new criterion for a quick choice of spatial configurations, for which the effect might be minimized. A comprehensive analysis of literature cases is provided, including the recommendations of the U.S. National Code and the Canadian standard.

Background: The purpose of this study was to evaluate and compare the performance of health, safety and environmental management of civil, traffic and urban services contractors in the 18th district of Tehran municipality in 2015-2016. Methods: This is an applied, longitudinal, descriptive-comparative study. The statistical population of this study was construction contractors, urban services and traffic in the municipality of district 18 of Tehran in the years 2015-2016. from 52 contractors, 18 construction contractors, 21 utilities contractors and 13 traffic contractors, respectively, were selected using census method. the research instrument consisted of periodic direct observation and completion of the HSE standard checklist by researchers. Data were analyzed using Kruskal-Wallis nonparametric test by SPSS software.Results: The HSE performance of all contractors (civil, utilities and traffic) was acceptable and the results of Kruskal-Wallis test showed that the HSE performance of contractors at the second visit of 2015 and the first visit of 2016 was significantly different in favor of civil contractors )p <0.01), but there was no significant difference between the first and third visits of 2015 and the second and third visits of 2016 (p> 0.05). visits in six periods indicate HSE Civil Contractors status increased from 100% unfavorable to 88.88% acceptable level and 11.11% good level, and in the case of civil service contractors who initially had 95.23% in an unfavorable situation and 4.76% in a favorable situation achieved 100% acceptable performance, and finally, the traffic contractors, who were 100% unfavorable, were upgraded to 100% acceptable. Conclusion: According to the findings of the study, it seems that the supervision of municipality inspectors on HSE performance of contractors can be effective in improving and strengthening the commitment to HSE requirements, therefore, it is suggested that periodical visits be made to the municipal contractors.

Tigrai region is one of the potential beekeeping areas in Ethiopia, which is endowed with diversified honeybee plant species. However, its honeybee plants are deforested and degraded due to natural and anthropogenic pressures. Area exclosures (AEs) has been practicing for the last three decades restore degraded habitats of the plant species in Ethiopia. Empirical data on the effectiveness of AE is still limited for restoration of honey bee plant species; this study was conducted to assess the roles of AE for species composition, density, and diversity and regeneration status of honeybee floras. Sixty quadrats were installed, 36 in AE and 24 in CGL (communal grazing lands) using a systematic sampling method. The study showed that a total of 42 honey bee plant species belonging to 23 families in AE and 33 species belonging to 17 families in CGL were recorded. The study also indicated a significant increase in the abundance, diversity, regeneration and the structure of the honey bee plant species was found in the AEs. The list presented herein provides a guide to stakeholders in establishing of AE for the foraging resource of honeybee in order to enhance the abundance, diversity and regeneration and structure. Thus, AE has made a significant contribution to solving the shortage of honeybee forages in the beekeeping industry. Therefore, the development of beekeeping is integrated with conservation of natural resources.

Metabolic syndrome is a growing global health problem. Evidence suggests that diets rich in phytochemical-containing herbs and spices can contribute to reduced risk of chronic disease. This review assesses the scope of evidence supporting the use of herbs and spices in the diet for prevention or treatment of metabolic syndrome and associated health conditions. A search of PubMed and Scopus databases was carried out to assess the available clinical or cohort evidence for culinary doses of commonly used herbs and spices. Trials that were measuring health factors related to metabolic disorders or the health of individuals with metabolic syndrome or associated diseases were included. Out of a total of 1742 papers identified, there were 146 relevant studies on black pepper, chilli, cardamom, cinnamon, coriander, cumin, fennel, fenugreek, garlic, ginger, Nigella seed, rosemary, sage and turmeric. No relevant research was found for cloves, mint, oregano, parsley or thyme. Cinnamon, fenugreek and ginger were the herbs/spices with the most published trials on them and showed promise for glycaemic control. Cardamom appears to have potential to reduce inflammatory markers, and cinnamon, ginger and turmeric for blood lipids. Patients with type 2 diabetes were the population most likely to be included in studies, but the preventative benefits of herbs/spices in healthy populations were also investigated, particularly for chilli, ginger and cinnamon. There is evidence for the beneficial effect of culinary doses of many common herbs/spices in the prevention and treatment of metabolic syndrome and associated disorders.

Education on Innovation and Entrepreneurship (I&E) has increased in the last two decades, specially, through MOOCs. Lately, these reusable online alternatives have tended to be revalorized by HEIs into blended learning activities, posing new challenges for instructors, specially, on how to bridge prior knowledge with in-class activities. Adopting a discursive approach to knowledge, our proposal aims to meet this challenge by identifying student’s ‘representations’, i.e., patterned constructions on disciplinary knowledge. Representations can be found across different cohorts and thus further complemented by instructors. To test this assumption and build our proposal, we analysed student’s representations in two observations. We mapped students’ representations over key I&E definitions (e.g., ‘start-up’) and, to know how prior knowledge may be complemented by instructors, we identified students’ alignment with expert disciplinary knowledge. Firstly, we found that the two cohorts tended to express representations by turning attention to several dimensions, e.g., referring to different types of features or finalities associated with concepts. Secondly, the disciplinary alignment description revealed that students tended to focus on the same components present in experts’ definitions, but with a greater level of generality. Our results have been packaged into a proposal that aims to help instructors scale their blended activities.

The approach towards myalgic encephalomyelitis / chronic fatigue syndrome (ME/CFS) remains in a permanent state of crisis with fierce competition between the psychosocial school, which attributes ME/CFS to the perception of effort, and the medical approach (Maes and Twisk, BMC Med, 2010,8,35). The aim of this paper is to review how to construct a nomothetic model of ME/CFS using Partial Least Squares (PLS) path analysis and ensembling causome (bacterial translocation as assessed with IgM/IgA responses to LPS), protectome (lowered coenzyme Q10), adverse outcome pathways (AOP) including increased lysozyme, CD38+ T cell activation, cell-mediated immune activation (CMI), and IgM responses to oxidative specific epitopes and NO-adducts (IgM OSENO). Using PLS, we trained, tested and validated this knowledge- and data-driven causal ME/CFS model, which showed adequate convergence, construct and replicability validity. This bottom-up explicit data model of ME/CFS objectivates the descriptive narratives of the ME/CFS phenome, using causome-protectome-AOP data, whereby the abstract concept ME/CFS is translated into pathways, thereby securing the reification of the ME/CFS phenome. We found that 31.6% of the variance in the physiosomatic symptom dimension of ME/CFS was explained by the cumulative effects of CMI and CD38+ activation, IgM OSENO, IgA LPS, lysozyme (all positive) and coenzyme Q10 (inversely). Cluster analysis performed on the PLS-generated latent vector scores of all feature sets exposed three distinct immune groups of ME/CFS, namely one with increased lysozyme, one with increased CMI + CD38 activation + depressive symptoms, and another with increased bacterial translocation + autoimmune responses to OSENO.

Student retention is one indicator of accountability in the implementation of educational programs. Achievement of student retention rates indicates the performance of the quality objectives of an institution or college. To get an accurate picture of the factors related to retention, we need to do modeling. The retention variable is the time response variable measured in semester units. One of the statistical analyzes that can be used to analyze response data in time is survival analysis. The selection of an accurate analytical method in modeling will produce valid conclusions and impact making policies that are right and on target. This paper presents alternative modeling of student retention in distance education using survival analysis. The method used is a literature review. This paper also briefly describes distance education, open and distance education, distance education students' characteristics, distance education student retention, and survival models for modeling student retention in distance education.

Defectively manufactured and deliberately damaged composite laminates fabricated with different continuous reinforcing fibres (respectively, carbon and glass) and polymer matrices (respectively, thermoset and thermoplastic) were inspected in magnetic resonance imaging equipment. Two pulse sequences were evaluated during non-destructive examination conducted in saline solution-immersed samples to simulate load-bearing orthopaedic implants permanently in contact with biofluids. The orientation, positioning, shape, and especially the size of translaminar and delamination fractures were determined according to stringent structural assessment criteria. The spatial distribution, shape, and contours of water-filled voids were sufficiently delineated to infer the amount of absorbed water if thinner image slices than this study were used. The surface texture of composite specimens featuring roughness, waviness, indentation, crushing, and scratches was outlined, with fortuitous artefacts not impairing the image quality and interpretation. Low electromagnetic shielding glass fibres delivered the highest, while electrically conductive carbon fibres produced the poorest quality images, particularly when blended with thermoplastic polymer, though reliable image interpretation was still attainable.

This study evaluates the input efficiency of greenhouse tomato and pepper farms in Kosovo. Using data collected from farm surveys, we conduct an input-oriented data envelopment analysis (DEA) to empirically assess input efficiency. Secondly, linear regression analysis is used to investigate which farm variables predict greenhouse tomato and pepper technical efficiency (TE). The DEA results indicated that among the seven regions in Kosovo, Prizren emerged as the most efficient greenhouse tomato producing region with a mean efficiency of 0.83 (on a scale of 0 to 1). Prishtina followed with a mean efficiency of 0.80. In the production of greenhouse peppers, Prishtina was the most efficient region with a mean efficiency of 0.99. Ferizaj followed with a mean efficiency of 0.93. Conclusions about farm characteristics that explain differences in efficiency were sensitive to model specification. Nevertheless, depending on the structural and operational characteristics of the greenhouse tomato and pepper farms, there is an opportunity for the technically inefficient farms and regions to improve their use of inputs.

Tidal swamp rice has long been cultivated by the local people of the South Kalimantan, Indonesia. This germplasm possess some important traits for adapted to a wide range of abiotic and biotic stresses. In this study, a total of sixteen cultivars of this germplasm, consisting of fifteen of the South Kalimantan Province and one of Sumatera Island, Indonesia (an outgroup) were analyzed, phylogenetically based on the chloroplast trnL-F and nuclear intergenic spacer region (IGS). The results showed that this germplasm has a relatively more extraordinary genetic diversity than other local rice germplasm. In a nucleotide level, this germplasm showed a genetic diversity of 0.61 for nuclear IGS and 0.58 for trnL-F. The phylogenetic reconstruction also exhibited that this germplasm has the unique illustration of phylogenetic trees, particularly for the combined sequence datasets. Thus, the results of our study would provide useful information for further understanding of evolutionary relationships of this germplasm and facilitate the efficient utilization of valuable genes for genetic improvement, particularly in the tidal swamp areas.

Abstract: Marine eutrophication is a pervasive and growing threat to global sustainability. Thereby nutrient discharges to the marine environment should be reduced to a minimum. When fertilizers are loaded to vessels in ports, a significant amount of nutrients are released into the sea, but so far these actions have received little attention. Here, we employed the Boosted Regression Trees modeling (BRT) to define relationships between fertilizer loading, loading area, rain intensity and nutrient discharge to the marine environment and then used the established relationships to predict daily nutrient discharge due to fertilizer loading. The studied subject was a port in the Gulf of Finland, where significant amount of both nitrogen and phosphorus are loaded to vessels. BRT models accounted for a significant proportion of the variability of nutrient discharge. As expected, the nutrient discharge increased with the amounts of fertilizers loaded and the intensity of rain. On the other hand, with increasing loading area the amounts of total nitrogen discharge increased, but phosphorus discharge decreased. The latter result may be due to different char-acteristics of the loading areas of different terminals. The model predicted that at the studied port the total nitrogen and phosphorus discharge into the marine environment due to fertilizer loading was 272,906 and 196 kg per year, respectively. Im-portantly, the developed model can be used to predict nutrient loads for different future scenarios to propose the best mitigation methods for nutrient discharges to the sea.

The ribosome is a macromolecular complex composed of RNA and proteins that interact through an integrated and interconnected network to preserve its ancient core activities. In this review, we emphasize the pivotal role played by RNA-binding proteins as a driving force in the evolution of the current form of the ribosome, underscoring their importance in ensuring accurate protein synthesis. This category of proteins includes both ribosomal proteins and ribosome biogenesis factors. Impairment of their RNA-binding activity can also lead to ribosomopathies, a group of disorders characterized by defects in ribosome biogenesis that are detrimental to protein synthesis and cellular homeostasis. A comprehensive understanding of these intricate processes is essential for elucidating the mechanisms underlying the resulting diseases and advancing potential therapeutic interventions.

In today's human society, diesel generators (DGs) are highly applied into the human energy and electricity supply system due to its technical, operational and economic advantages. This paper proposes an intelligent nonlinear $H_2/H_{\infty}$ robust controller based on the chaos particle swarm gravity search optimization algorithm (CPSOGSA), which controls the speed and excitation of a DG. In this method, firstly, establish the nonlinear mathematical model of the DG and then design the nonlinear $H_2/H_{\infty}$ robust controller based on this. The direct feedback linearization and the $H_2/H_{\infty}$ robust control theory are combined and applied. Based on the design of the integrated controller for DG speed and excitation, the system's performance requirements are transformed into a standard robust $H_2/H_{\infty}$ control problem. The parameters of the proposed solution controller are optimized by using the proposed CPSOGSA. The introduction of CPSOGSA completes the design of an intelligent nonlinear $H_2/H_{\infty}$ robust controller for DG. The simulation is implemented in MATLAB/Simulink, and the results are compared with the PID control method. The obtained results prove that the proposed method can effectively improve the dynamic accuracy of the system and the ability to suppress disturbances and improve the stability of the system.

Fruit and vegetable (FV) consumption benefits the health of populations, particularly those in East and Southeast Asian countries, which have undergone an unprecedented change in their food environments in the last decade. This current systematic review is the first to study determinants—facilitators, barriers, and moderators—associated with FV consumption in East and Southeast Asia. In a search of the literature, we consulted five electronic academic databases of English peer-reviewed papers published between 2010 and 2020 and found 31 studies. Results of these studies show that individuals strongly perceive FVs as being higher quality and safe and trust in their benefits, and food businesses with modernized systems have significantly fostered the consumption of FVs. A main barrier to FV consumption, however, is financial concerns, exacerbated by food businesses with FV unavailability and urbanization-induced FV price inflation and dietary patterns. Further hindering FV consumption are demographics and shopping patterns. The fragmented and conditionalized findings of the 31 studies require standardized FV consumption measurements. Unlike the impact of FV consumption determinants and their interactions in Western countries, those in Asia, particularly countries other than China, have been substantially understudied. Therefore, as the research gaps in studies of food environments and FV consumption in East and Southeast Asia urgently demand scholarly attention, this paper proposes recommendations that favour the consumption of FVs.

Aflatoxins in feeds cause great health hazards to animals and in advance, to human. Potential of crude clays designated AC, KC, CC and MC and ashes VA and RA were evaluated for their capacity to adsorb aflatoxins B₁ (AFB₁), B₂ (AFB₂), G₁ (AFG₁) and G₂ (AFG₂) relative to a commercial binder Mycobinder^R (Evonik Industries AG) using in-vitro technique. On average, CC, VA, KC, MC, AC, RA and Mycobind^R adsorbed 39.9%, 51.3%, 61.5%, 62.0%, 72.6%, 84.7% and 98.1% of the total aflatoxins in buffered solution, respectively. The capacity of AC and RA was statistically (p<0.05) better in binding aflatoxins next to Mycobind^R. Capacity of the TBM and Mycobind^R to bind aflatoxins, seemed to follow the trend of their cation exchange capacity (CEC). The CEC (meq/100g) of CC, MC, KC, VA, AC, RA and Mycobind^R were 7.0, 15.4, 18.8, 25.4, 27.2, 27.2 and 38.9, respectively. On average 96.3%, 42.7%, 80.8% and 32.1% of AFB1, AFB2, AFG1 and AFG2 were adsorbed, respectively. Binding capacity of the clays and ashes relative to Mycobind^R was about 100% for AC and RA, 50% for KC, MC and VA and 33.3% for CC. The AC and RA seem to be promising resources in binding aflatoxins in solution.

Tomato is considered the most important vegetable crop worldwide. Improving the nutritional value of fruits must be based on sustainable production in terms of varieties and fertilization management. This study aimed to improve the nutritional value (total soluble solids, acidity, lycopene, β-carotene, polyphenols, macro and microelements) of two tomato varieties (‘Cristal’ and ‘Siriana’) under three fertilization types (NPK chemical fertilizer, chicken manure and biological fertilizer with microorganisms) for the greenhouse. Primary metabolism compounds do not vary significantly according to the type of fertilizer used. The results for the antioxidant compounds showed a better effect of biological fertilization compared to chemical fertilizer and control unfertilized. The tomato fruits from the local cultivar (‘Siriana’) are richer in nutritional compounds such as rutin, regardless of the type of fertilization, which denotes a good ability to adapt to crop conditions. Tomato cultivars reacted positively to microbiological fertilization compare to chemical, thus producing nutritious fruits under sustainable management. Tomato fruits were richer in the quality of microelement contents.

Over the past three decades, the region has undergone significant changes that have transformed the social, economic and political landscape. The traces of these changes are particularly visible in the post-socialist states of Central and Eastern Europe. These processes have sometimes fragmented, sometimes reshaped, and sometimes transcended borders, reshaping the region. The focus of this study is on the 'geography' of companies, i.e. the concentration of companies with more than 10 employees in the region in the 15 countries selected, according to various criteria. The countries covered by the study are Albania, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, the Czech Republic, Hungary, Kosovo, Montenegro, Northern Macedonia, Poland, Romania, Serbia, Slovakia, Slovenia, Poland, Slovakia and Slovenia. The data of the active economic operators (over 300 thousand) of the countries included in the study were analyzed by turnover and size. The spatial distribution of enterprises at the NUTS3 level presents a far more diverse picture than what is typically observed in economic indicators such as GDP. Additionally, the disparities in this particular distribution are not as pronounced or distinct as those of general economic indicators.

The Hepatitis B virus, chronically infects over 240 million persons worldwide. The Hepatitis B vaccine is 90% effective in preventing perinatal transmission if the first dose is given within the first 24 hours of life followed by a minimum of 2 subsequent doses. In October 2021, Antigua and Barbuda, through it’s only public hospital - the Sir Lester Bird Medical Centre, instituted a hospital based Hepatitis B vaccine birth dose policy. Timely birth dose coverage was 72% and total birth dose coverage 81%. 10.5% of parents refused the hepatitis b – birth dose, of which 76% either felt uncomfortable or preferred to wait. 100% of babies born before arrival received timely vaccine administration, likewise 100% of Hepatitis B exposed babies were vaccinated, with 83% of them receiving the Hepatitis B Immunoglobulin. A maternal Hepatitis B surface antigen result was available for 90.4% of mothers. Barriers to timely birth dose administration included vaccination hesitancy, gaps in healthcare worker knowledge, and the consistent supply of Hepatitis B vaccine. Instituting a quality improvement team, health information system, robust educational efforts, and addressing barriers will make achieving the WHO programmatic targets of eliminating mother to child transmission of hepatitis B by 2030 possible.

The global warming our generation is experiencing is just one of the great environmental crises of the Anthropocene, a geological period that began with the use of fossil fuels and that, in merely one century and a few decades of industrial activity, has altered ecosystemic processes that sustain human health and well-being. Beyond the loss of the “intrinsic value of nature”, changes in the magnitude and direction of biogeochemical cycles and increases in temperature are phenomena that not only accompany the loss of habitats and species but impair resilience by ultimately generating greater and more complex numbers and types of exposures that constitute a danger to human health. In this study, we attempted to offer some notes about the margin, understood as that space with the greatest inequity and therefore the fastest growth of risk: the collision area where deprivation marks the social determinants of health and where the greatest interaction with causes of disease occur.

With the outbreak of the COVID-19 disease, the research community is producing unprecedented efforts dedicated to better understand and mitigate the affects of the pandemic. In this context, we review the data integration efforts required for accessing and searching genome sequences and metadata of SARS-CoV2, the virus responsible for the COVID-19 disease, which have been deposited into the most important repositories of viral sequences. Organizations that were already present in the virus domain are now dedicating special interest to the emergence of COVID-19 pandemics, by emphasizing specific SARS-CoV2 data and services. At the same time, novel organizations and resources were born in this critical period to serve specifically the purposes of COVID-19 mitigation, while setting the research ground for contrasting possible future pandemics. Accessibility and integration of viral sequence data, possibly in conjunction with the human host genotype and clinical data, are paramount to better understand the COVID-19 disease and mitigate its effects.

An energy diagnosis is a tool used to seek the improvement of energy saving measures, environmental conservation and energy efficiency, making relevant its implementation in any kind of buildings. For this article, an energy diagnosis of third level was carried out in buildings of the Instituto de Energías Renovables (IER) from Universidad Nacional Autónoma de México (UNAM) through survey and census of the 36 buildings in the IER, in order to characterize current patterns of energy consumption and demand, and generating specific strategies towards savings and energy efficiency, such as indicators and corrective proposals within and non-financial investment.

We have found a region in the northwestern Japan Sea near the Subpolar Front where mesoscale eddies regularly form and circulate. The anticyclonic eddy with a strong dynamic feature, vertically extended to the bottom (~3500 m), multilayer core structure and extreme values of temperature and salinity was sampled there in the cruise in May 2004. The altimetry-based eddy tracking showed that it had a life span of nine months with the size reaching 120 km. CTD observational data were used to explore the eddy’s features and vertical structure. The eddy had a multilayer core with different thermohaline characteristics which could be originated by eddy interaction with the surrounding waters during its life. The evolution of the eddy has been studied and analyzed with the help of altimetry-based Lagrangian indicators of water motion. Performing the particle-tracking numerical experiments, we computed the Lagrangian maps that contain information on the origin of water inside the eddy core and its ‘age’ on every day of the eddy’s life. Inspecting daily-computed Lagrangian maps, we documented the essential events in the evolution of the eddy including its formation, splitting, merger, entrainment and detrainment of water, erosion and eventual decay. All these observations have been verified with the infrared satellite images. The new Lagrangian technique has been applied to calculate day by day the content of water of various origin (coastal, subtropical and subarctic) entrained into the eddy core. It has been found that the surface core has been filled mainly with subtropical water originated in the southern flank of the Subpolar Front. The episodes with cardinal changes of ratio of different water types have been recorded and verified with the infrared satellite images and maps of the origin of water inside the eddy core.

Metabolic bone diseases cover a broad spectrum of disorders that share alterations of bone metabolism leading to a defective skeleton, associated with increasing morbidity, disability, and mortality. There is a close connection between the etiology of metabolic bone diseases and genetic factors, being TP53 one of the genes associated therewith. The single nucleotide polymorphism (SNP) Arg72Pro of TP53 is a genetic factor associated with several pathologies, including cancer, stroke and osteoporosis. Here, we aim to analyze the influence of the TP53 Arg72Pro SNP on bone mass in the humanized Tp53 Arg72Pro knock-in mice. This work reported on the influence of TP53 Arg72Pro polymorphism in bone microarchitecture, OPG gene expression and apoptosis bone status. The results showed that the proline variant of TP53 Arg72Pro polymorphism (Pro72-p53) was associated with deteriorated bone tissue, lower OPG/RANK ratio and lower apoptosis in bone tissue. In conclusion, the TP53 Arg72Pro polymorphism modulates bone microarchitecture and may be a genetic biomarker to identify individuals with an increased risk of suffering metabolic bone alterations

Because of the large number of parameters that interact in their function, determining dynamic regime parameters as well as the mode of function of amplifying stages is an extremely complex problem. This paper describes a LabVIEW application for studying the functioning of an ampli-fier in various connections. The user selects the generator's parameters, the type of connection and its parameters, as well as the electric charge characteristics. The application can determine both the stage characteristics and the Bode characteristics. The amplifier's stability zone, as well as its gain and phase, are determined based on these characteristics. An important advantage of this application is that the design of the amplifier stage can be made starting from some param-eters that the amplifier can establish, from which the values of components can be determined. In order to validate the simulation results using the LabVIEW application, a specialized program Multisim was used, as well as experimental measurements using the Electronics Explorer Board. Both Multisim and Electronics Explorer Board can determine Bode characteristics. In both simu-lations and experimental amplifiers, the same schemes with the same transistor was used. The application can be used for educational purposes as well as to design the amplifier's stage to achieve specific parameters.

Adding a submerged zone (SZ) is deemed to promote denitrification during dry periods and thus improve NO3--N removal efficiency of a bioretention system. However, few studies had investigated the variation of nitrogen concentration in the SZ during dry periods and evaluated the effect of the variation on nitrogen removal of the bioretention system. Based on the experiment in a mesocosm bioretetion system with SZ, this study investigated the variation of nitrogen concentration of the system under 17 consecutive cycles of wet and dry alternation with varied rainfall amount, influent nitrogen concentration and antecedent dry periods (ADP). The results indicated that (1) during the dry periods, NH4+-N concentrations in SZ showed an exponential decline trend, decreasing by 50% in 12.9 ± 7.3 hours; while NO3--N concentrations showed an inverse S-shape decline trend, decreasing by 50% in 18.8 ± 6.4 hours; (2) during the wet periods, NO3--N concentration in the effluent showed an S-shape upward trend; and at the early stage of the wet periods, the concentration was relatively low and significantly correlated with ADP, while the corresponding volume of the effluent was significantly correlated with the SZ depth; (3) in the whole experiment, the contribution of nitrogen decrease in SZ during dry periods to NH4+-N and NO3--N removal accounted for 12% and 92%, respectively; and the decrease of NO3--N in SZ during the dry period was correlated with the influent concentration in the wet period and the length of the dry period.

Recent evidence suggests that among behavioral-lifestyle factors, adherence to a healthy dietary pattern such as the Mediterranean Diet (MedDiet) is linked not only to better psychological health and mental positive status but also to increased subjective well-being (SWB). Nevertheless, this association has been unexplored among individuals with excessive weight. This study explored whether adherence to the MedDiet and the intake of healthy foods such as fruits and vegetables (FV) are associated with increased happiness and life satisfaction among Spanish adults with overweight or obesity when weight, body image, and body satisfaction are also considered. A convenience sample of adult individuals with excessive weight completed self-reports on the study variables, and weight and BMI were measured by bioimpedance. No evidence of a relationship with SWB indicators was obtained for MedDiet global indicators, probably due to the low adherence to a healthy diet by these individuals. In contrast, FV intake, as a powerful indicator of healthy eating, was associated with life satisfaction when BMI and body image dimensions were considered, among which body satisfaction also had a key role. Moreover, life satisfaction fully mediated the relationship between FV consumption and happiness. Our findings are expected to make a relevant contribution to knowledge on the positive correlates or protective factors for overall well-being in obesity, including dietary habits and body appreciation. Our results may inform obesity management actions focused on inclusive, positive aesthetic models and promoting a healthy lifestyle for happiness in obesity.

We propose that the high energy Cosmic Ray particles around the spectral turn-down commonly called the {\it knee} and up to the upturn, commonly called the {\it ankle}, mostly come from Blue Super Giant star explosions. At the upturn, i.e. the {\it ankle}, Cosmic Rays probably switch to another source class, most likely extragalactic sources. To show this we recently compiled a set of Radio Supernova data to list the magnetic field, shock speed and radius scale (Biermann et al. 2018) \cite{Biermann18}. Using particle acceleration theory at shocks, those numbers can be transformed into characteristic {\it knee} and {\it ankle} energies. Without adjusting any free parameters both of these observed energies are directly indicated by the supernova data. We now proceed to the next step in the argument, and use the Supernova Remnant data of the starburst galaxy M82. Assuming that they are Blue Supergiant star explosions, the shock will race to their outer edge with a magnetic field that follows ${B (r) \, r \, \sim \, const.}$. We argue that the shock runs through the entire magnetic plasma wind region at full speed all the way out to the wind-shell, which is of order parsec scale. The speed is observed to be $\sim \, 0.1 \, c$ at about ${10^{16} \, {\rm cm}}$ radius in the plasma wind. This demonstrates how Blue Supergiant star explosions can provide the Cosmic Ray particles across the {\it knee} and up to the {\it ankle} energy range. The data from the CREAM (Cosmic Ray Energetics and Mass Experiment) mission will test this cosmic ray concept which is reasonably well grounded in two independent radio supernova data sets. The next step in developing our understanding is to obtain accurate Cosmic Ray data near to the {\it knee}, and use unstable isotopes of Cosmic Ray nuclei at high energy to probe the "piston" driving the explosion. We plan to combine these data with the physics of the budding black hole which is probably forming in each of these stars to learn more.

As an emerging discipline, Design Morphology, with the advantage of "Form Study", has been integrated with many disciplines, and gradually formed its collaborative innovation paradigm. The inclusion of "Ecology" into Design Morphology is expected to promote the research of Design Morphology with the help of the systematic thinking and methods of ecology. The ecosystem of Design Morphology includes the natural ecosystem and the quasi-ecosystem closely related to human beings, and also put forward the concept of "Form Community" for the first time in the design field. In fact, this is exactly the research scope of Design Morphology. Advocating the ecological view of Design Morphology, can not only help to design researchers improve their values and world view, with new thinking and method to engage in "Form Study", but also contribute to the theoretical construction and thinking expansion of Design Morphology, and play a positive role in promoting interdisciplinary collaborative innovation led by Design Morphology. In addition, it can be used to evaluate the overall research and future development trend of Design Morphology, and provide the new research ideas and approaches for the development of design.

This paper considers a new approach to the modeling of the vacuum infusion process at the manufacturing three-dimensional composite parts of complex shape. The developed approach and numerical methods are focused on the reliable prediction with the needed accuracy and elimination the unrecoverable defect of composite structure such as the dry spots. The paper presents some experimental results, which demonstrate two cases of dry spots formation in large aircraft composite panels, and analyses the reasons of these defects arising. Our numerical technique is based on the vacuum infusion of the liquid resin into porous preform as the two phase flow, which is described by the phase field equation coupled with the Richards equation describing the fluid motion in unsaturated soils with spatially varied pressure dependant porosity and saturation. This problem statement allowed to correctly reconstruct the resin front motion and formation of inner and outer dry spots depending on its movement. For the rapid detection of preform zones that are suspicious for defect formation two indicators calculated during process simulation are proposed and tested at the numerical experiments. The auxiliary program tool has been developed in MATLAB environment to correctly detect the times of formation, localization and dimensions of the arising dry spots by using the results of the finite element model simulation.

The intensification of modern farming methods in developed nations has exacerbated the issue of soil degradation and over-utilization of naturally available resources, hence, tinkering negatively with the health and productive capacity of soil. Chemical fertilizers, while increasing crop yields, have resulted in environmental pollution and health hazards. Green manuring presents a sustainable alternative by enriching soil fertility and reducing reliance on chemical fertilizers. This paper reviews the impact of green manuring on soil properties, crop yield, and farm economies. In-situ green manuring involves growing and incorporating the crops within the field, while ex-situ green manuring incorporates plant material from external sources. Leguminous green manures are particularly effective owing to nitrogen fixation capability and rapid decomposition. The inclusion of green manure improves the availability of nutrients, microbial count and carbon content of the soil, thereby, enhancing the overall health of soil and crop productivity. Additionally, green manures reduce pests and diseases, suppress weeds, and provide supplementary forage. Despite the benefits, challenges such as limited water resources, seed availability, and farmer reluctance hinder widespread adoption. Future research should focus on raising awareness, quantifying benefits, and developing location-specific cropping systems to optimize green manuring practices.

We examine the role of zonal Ekman transport along the coast of Senegal on 30 August, 2015 when the tropical disturbance associated with Tropical Cyclone Fred was located to the west of Senegal causing considerable coastal damage to coastal areas south of Dakar, Senegal. Ten-meter winds from three Weather Research and Forecast model simulations were used to estimate zonal Ekman transport, with the largest values found during the 30 August. The simulations are in agreement with limited coastal observations showing increasing southerly wind speeds during 30 August but are overestimated relative to the 3 coastal stations. The strong meridional winds translate into increased zonal Ekman transport to the coast of Senegal on 30 August. The use of a coupled ocean model will improve the estimates of Ekman transport along the Guinea-Senegalese coast. The observed damage suggests that artificial and natural barriers (mangroves) should be strengthened to protect coastal communities in Senegal.

The emission of [O I] lines in the coma of Comet 67P/Churyumov-Gerasimenko during the Rosetta mission have been explained by electron impact dissociation of water rather than the process of photodissociation. This is the direct evidence for the role of electron induced processing has been seen on such a body. Analysis of other emission features is handicapped by a lack of detailed knowledge of electron impact cross sections which highlights the need for a broad range of electron scattering data from the molecular systems detected on the comet. In this paper we present an overview of the needs for electron scattering data relevant for the understanding of observations in coma, the tenuous atmosphere and on the surface of 67P/Churyumov-Gerasimenko during the Rosetta mission. The relevant observations for elucidating the role of electrons come from optical spectra, particle analysis using the ion and electron sensors and mass spectrometry measurements. To model these processes electron impact data should be collated and reviewed in an electron scattering database and an example is given in the BEAMD, which is a part of a larger consortium of Virtual Atomic and Molecular Data Centre – VAMDC.

In recent decades, there have been significant problems worldwide related to global warming and the intensification of extreme temperature and rainfall events. This research evaluated daily temperature and rainfall indices trends to identify whether warming signals have occurred in South Australia over the past fifty years. Extreme cold, hot, and rainfall events were calculated using climatic data from 37 weather stations. A Mann-Kendall test was used for trend analysis with Sen's estimator. As a result, we determined that for the 1970-2021 period, the maximum and minimum temperatures increased by 1.1 and 0.7 °C, respectively, while precipitation had a negative trend (-52.2 mm/period). Since statistical significance was found in analysing extreme cold and hot events, we find that warming signals have several impacts on South Australia. In the case of rainfall events, we identified a heterogeneous pattern characterised by a reduction in the annual amount, and an increase in extreme rainfall events. The findings enable us to conclude that the area shows signs of global warming that could affect the intensity and magnitude of droughts. This information is essential for continuing with current management strategies to adapt and mitigate the effects of global warming in South Australia.

Implementing the methodology of clinical simulation in the nursing degree course is a necessity in the European framework of higher education to acquire competences. The objectives of this research were to evaluate the strategies and techniques used during the simulations, identify the contents learned, and determine which of them are transferred to the nursing practice. We performed an observational, descriptive, and cross-sectional study from the nursing students’ perspective during the 2020-21-year course. On the one hand, our results show that the DASH scale helped us to obtain an internal validity of the simulations obtaining a mean score of 6.61 out of 7. On the other hand, the Ad Hoc scale, based on the competences were acquired in the simulations were transferred to the care practices. In conclusion, it is possible to improve care practices by integrating knowledge through clinical simulations.

In this work, we studies the principle of ground electrode current field through ground communication technology, signal design, and optimal working mode of excitation source, so as to adapt the working mode, working frequency, and transmission medium condition of signal transmission. Through waveform design, energy is concentrated in the main conduction direction, which is beneficial for signal filtering at the receiving end and achieving high reliability data transmission; On this basis, on-site environmental testing was conducted to verify the detection and recognition technology of weak signals. Signal design and detection recognition are a very important part of the grounding electrode current field through ground communication technology. The grounding electrode current field through ground communication technology is mainly applied to solve the problem of communication between rescue personnel and trapped personnel before and during tunnel engineering collapse and rescue.

Maritime search and rescue is a crucial component of the national emergency response system, which currently mainly relies on Unmanned Aerial Vehicles (UAVs) to detect the objects. Most traditional object detection methods focus on boosting the detection accuracy while neglecting the detection speed of the heavy model. However, it is also essential to improve the detection speed which can provide timely maritime search and rescue. To address the issues, we propose a lightweight object detector named Shuffle-GhostNet-based detector (SG-Det). First, we construct a lightweight backbone, named Shuffle-GhostNet, which enhances the information flow between channel groups by redesigning the correlation group convolution and introducing the channel shuffle operation. Second, we propose an improved feature pyramid model, namely BiFPN-tiny, which has a lighter structure while being capable of reinforcing small object features. Furthermore, we incorporate the atrous spatial pyramid pooling module (ASPP) to the network, which employs atrous convolution with different sampling rates to obtain multi-scale information. Finally, we generate three sets of bounding boxes at different scales – large, medium, and small – to detect objects of different sizes. Compared with other lightweight detectors, SG-Det achieves better tradeoffs across performance metrics, and enables real-time detection with an accuracy rate of over 90% for maritime objects, which shows that it can be better meet the actual requirements of maritime search and rescue.

In order to properly cover different scenarios, radiation patterns of antennas should be accordingly adjusted before fabrication. However, most antennas are unable to provide both broadside beam and designable conical beam which are usually-used radiation patterns for radio coverage. In this paper, a planar Circular Polarized (CP) annular Leaky-Wave Antenna (LWA) with conical beam is proposed, which is realized on annular Substrate-Integrated Waveguide (SIW). Broadside beam or conical beam could be easily obtained by fabricating the LWA with modified structural parameters. The central operating band is 5.8 GHz. The LWA allows only the -1th spatial harmonic to radiate, while the fundamental wave and other spatial harmonics are suppressed in slow wave mode. In order to validate the design effectiveness, two examples for broadside beam and conical beam radiation are fabricated and measured. The measurement results show good agreement with the simulation results. The proposed LWA presents a promising radiation performance and is a good candidate for wireless communication applications.

Although several protocols for genetic transformation of citrus have been published, it is highly desirable to further improve its efficiency. Here we report treatments of Agrobacterium cells and citrus explants prior to and during co-cultivation process to enhance transformation efficiency using a commercially used rootstock 'Carrizo' Citrange as a model plant. We pre-cultured Agrobacterium cells in a 1/10 MS, 0.5 g/L 2-(N-morpholino) ethanesulfonic acid (MES) and 100 µM acetosyringone liquid medium for 6 hours at 25 ℃ before used to infect citrus explants. We incubated epicotyl segments in an MS liquid medium containing 13.2 µM 6-BA, 4.5 µM 2,4-D, 0.5 µM NAA for 3 hours at 25℃ prior to Agrobacterium infection. In the co-cultivation medium, we added 30 µM paclobutrazol and 10 µM lipoic acid. Each of these three treatments significantly increased the efficiencies of transformation. When the three treatments were combined, we observed that the transformation efficiency was enhanced from 11.5% to 52.3%. The improvement of genetic transformation efficiency mediated by these three simple treatments may facilitate more efficient applications of transgenic and gene editing technologies for functional characterization of citrus genes and for genetic improvement of cultivated citrus varieties.

During puberty and emerging sexuality, adolescents experience important physical, mental, and social transformations. In the process of dealing with these changes, adolescents can become potentially vulnerable to mental health problems.The aim was to identify and synthesize published research evidence on sexuality-related mental health stressors among adolescent girls and boys, identify gaps (if any) in current knowledge, and contribute to knowledge about the experiences of emerging sexuality and health among adolescents, to further inform research, practice, and policy initiatives in sexual health.A scoping literature review of peer-reviewed articles published between 1990 and 2018. MEDLINE, CINAHL, EMBASE, PsycINFO, Global health, ERIC, and Sociological Abstracts databases were searched for research studies that reported experiences of sexuality related mental health issues and symptomatology of adolescents. We targeted studies conducted with adolescent populations between ages 11-24 years living in LMICs.Data from 12 published research papers, including 8 qualitative studies, 3 quantitative studies, and 1 mixed method study, were systematically analyzed. Four major themes and 4 sub themes were identified regarding sexual health and mental health of adolescents: 1) Relationship of sexuality and mental health; 2) Social and cultural influences; 3) Challenges in seeking sexuality information and services among adolescents; and 4) Educational needs among adolescents related to sexuality; and 4) Educational needs among adolescents related to sexuality. Lack of social support, Unmet needs for accessible adolescent friendly sexual health services, counseling, and age-appropriate information may be associated with several mental health stressors and symptoms, such as sadness, depressive and anxiety symptomatology, regret, fear, embarrassment, low self-esteem, guilt, shame, and anger. Therefore, tackling sexuality-related stressors could play an important role in addressing the overall wellbeing of young people. Future studies need to generate a deeper understanding of the concept of sexual health and its relation to mental health in diverse contexts. Health care professionals need to be aware of sexuality-related experiences of adolescent girls and boys by offering effective youth-friendly sexual and reproductive health education to support overall mental health and improve the experiences of emerging sexuality in adolescents.