According to Copenhagen interpretation, a quantum particle can exist in a superposition of all possible states, out of which only one state is observed when it is measured. Interestingly, it has been observed that interaction with the quantum particle during measurement can also affect the outcome of the state. A scheme for interaction free measurement was proposed by Elitzur and Vaidman [Found. Phys. 23, 987 (1993)], where they used Mach Zehnder interferometer to detect whether a bomb is alive or dead. In 25 % of the cases they were able to detect that the bomb is alive without exploding it. Here, we demonstrate the above experiment using quantum computing, which can be realized in a quantum computer designing quantum circuits on it. We explicate all the cases, including whether the bomb is alive or dead by proposing new quantum circuits and executing those in QISKit as provided by IBM Quantum Experience platform and verify the obtained results.

Multi-floor environments are usually ignored while designing an autonomous robot for indoor cleaning applications. However, for efficient operation in such environments, the ability of a robotic platform to traverse staircases is crucial. Staircase detection and localization is highly important for planning the traversal on staircases. This paper describes a deep learning approach using Convolutional Neural Networks (CNNs) based Robot Operation System (ROS) to staircase detection and localization. We use an object detection network to detect staircases in images. We also localize these staircases using a contour detection algorithm to detect the target point, a point close to the center of the first step, and the angle of approach to the target point. Experiments are performed with data obtained from images captured on different types of staircases at different view points/angles. Results show that the approach is very accurate in identifying the presence of the staircase in the working environment and is also able to locate the target point with good accuracy.

Although there are extensive literature reports on the use of gold nanoparticle (AuNP) based homogeneous assays for detection of biomolecules, very few experimental description and procedures involving their preparation are described. In this study, AuNPs conjugated to Bovine Serum Albumin or Envelope protein from Dengue II were developed as a homogeneous immunoassay for antibody detection. We report here optimization of key parameters to prepare an immunoassay like conjugation protein concentration, centrifugation time, electrolyte addition and assay temperature. We determined that saturating protein concentrations improved AuNPs surface coverage and uniformity of the assay and addition of sodium chloride improved sensitivity of the antibody detection method and assay stability. Furthermore, we showed that dynamic light scattering can be used to monitor changes in gold nanoparticles in the preparation and detection steps. Additionally, numerical simulations of the plasmonic optical response of AuNPs were carried out to scan for size-dependent response of the AuNPs. The AuNPs homogeneous immunoassay developed was further used in the detection of antibodies in vitro to detect Dengue virus infection.

A new type of gold nanoparticles was synthesized by using benzoyl pyrazolone as a capping agent. The synthesized AuNPs exhibited a spherical shape and a monodisperse and fluorescence emission characteristic peak at 650 nm. The AuNPs –BMPBP was demonstrated as sensitive and selective fluorescent chemosensor for detection of Al ³⁺ ion. In the presence of Al ³⁺ ion, the fluorescent emission of BMPBP-AuNPs at 650 nm, increased with an increasing concentration of Al ³⁺ ion with a low detection limit (2 µM), the proposed method provided to apply determination of Al ³⁺ ion of tap water with satisfactory results.

The application of 3D LiDAR technology has become increasingly extensive in tunnel monitoring due to the large density and high accuracy of the acquired spatial data. The proposed processing method aims at circle tunnels and provides a clear workflow to automatically process raw point data and easily interpretable results to analyze tunnel health state. The proposed automatic processing method employs a series of algorithms to extract point cloud of a single tunnel segment without obvious noise from entire raw tunnel point cloud mainly by three steps: axis acquisition, segments extraction and denoising. Tunnel axis is extracted by fitting boundaries of the tunnel point cloud rejection in plane with RANSAC algorithm. With guidance of axis, the entire preprocessed tunnel point cloud is segmented by equal division to get a section of tunnel point cloud which corresponds to a single tunnel segment. Then the noise in every single point cloud segment is removed by clustering algorithm twice, based on distance and intensity. Finally, clean point clouds of tunnel segments are processed by effective deformation extraction processor to get ovality and three-dimensional deformation nephogram.

A theoretical analysis of haemoglobin (Hb) concentration detection is presented in this work with the objective of achieving more sensitive detection and monitoring low concentrations. Surface-enhanced SPR spectroscopy on silver nanoparticles was employed for recording Hb concentrations less than 10 g/L. In this paper, Fe₃O₄@Au core-shell, nanocomposite spherical nanoparticle consisting of a spherical Fe₃O₄ core covered by Au shell, was used as an active material for biomolecules detection in the Surface Plasmon Resonance (SPR)-based biosensor in the wavelength 632.8 nm. We present the simulation of detection amplification technique through Attenuated Total Reflection (ATR) spectrum in the Kretschmann configuration. The system consists of a four-layer material i.e prism/Ag/Fe₃O₄@Au+Hb/air. Dielectric function determination of the core-shell nanoparticle (Fe₃O₄@Au) and the composite (Fe₃O₄@Au+Hb) was done by applying the Effective Medium Theory approximation and the calculation of the reflectivity is carried out by varying the size of core-shell (r₀). In this simulation, the refractive index of the BK7 prism is 1.51; the refractive index of Ag thin film is 0.13455+3.98651i with the thickness of 40 nm, and the refractive index of the composite is varied depending on the size of nanoparticle core-shell. Our results show that by varying the radius of the core and the shell thickness, the dip of the reflectivity (ATR) spectrum is shifted to the larger angle of incident light and the addition of core-shell in the conventional SPR-based biosensor leads to enhancement of the SPR biosensor sensitivity, for the core-shell radius 10 nm, the sensitivity increased by 1.35% for F = 0.1, and by 4.89% for F =0.8 compared to the sensitivity of the conventional SPR-based biosensor without core-shell addition.

Automobile proving ground is important for the research of vehicles which is used for the vehicle dynamics, durability testing, braking testing, etc. However, the roads in automobile proving ground will inevitably be damaged with the extension of the service life. In most previous researches, equipment similar to laser cross-section was used to detect pavement quality, the principle of which was to reflect pavement quality by detecting road surface roughness. This method ignores the elastic deformation of the roads itself when the vehicle is traveling on it and hardly compensate for the amendment. Therefore, this article presents a new method based on force sensor to reduce the impact of elastic deformation such as wheel tyre deformation, pavement deformation, and wheel rim deformation. In which, force sensors mounted on the wheels collect the three-dimensional dynamic load of the wheel.The presented method has been tested with two sets of cobblestone road load data, and the results show that The　incentives imposed by the test vehicle on the target road are 88.3%, 91.0%, and 92.05% of the incentives imposed by the test vehicle on the standard road in three dimensions, respectively. It is clear that the proposed method has strong potential effectiveness to be applied for lose detection of the special road application.

Automated Electrocardiogram (ECG) processing is an important technique which helps in identifying abnormalities in the heart before any formal diagnosis. This research presents a real-time and lightweight R-assisted feature extraction algorithm and a heartbeat classification scheme which achieves highly accurate abnormality detection. In the proposed algorithm, we extract fifteen features from each heartbeat taken from raw Lead-II ECG signals. The features carry medically valuable information such as locations, amplitude and energy of ECG waves (P, Q, R, S, T waves) which are then used for detection of any abnormality that might be present in the heartbeat using various classification algorithms. We have used four popular databases from Physionet and extracted ten thousand ECG signals from each for training the models and benchmarking results. Four classification models i.e. Naïve Bays, k-Nearest Neighbor, Neural Network, Decision Tree were used for abnormality detection validating the efficiency of the system.

Accurate assessment of the breast cancer deterioration degree plays a crucial role in making medical plan, and the important basis for degree assessment is the number of mitoses in a given area of the pathological image. We utilized deep multi-scale fused fully convolutional neural network (MFF-CNN) combing with conditional random felid (CRF) to detect mitoses in hematoxylin and eosin stained histology image. Analyze the characteristics of mitotic detection ----scale invariance and sparsity, as well as the difficulties ---- small amount of data , inconsistent image staining and sample class unbalanced. Based on this, mitotic detection model is designed. In this paper, a tissue-based staining equalization method is used, and to establish an effective training sample set, we select training samples by using CNN. A mitotic detection model fusing multi-level and multi-scale features and context information was designed, and the corresponding training strategy was made to reduce over-fitting. As preliminarily validated on the public 2014 ICPR MITOSIS data, our method achieves a better performance in term of detection accuracy than ever recorded for this dataset.

Aiming at the damage detection and continuous monitoring of high efficiency composite structure, the method of carbon nano sensor embeded in the 3-D braided composite material specimen was put forward and the method of damage location for 3-D braided composite material was described. In this paper, the mechanical and electrical characteristics of carbon nano-fiber were analyzed. Considering the massive data of the health monitoring of composite processing, to ensure that the system has good real-time performance, quaternary matrix Singular Value Decomposition algorithm is proposed to simplify data and improve the efficiency of the algorithm. The existence of injury is determined and the damage location is calculated by comparing with key features of healthy specimen. Experimental results prove the method is feasible and effective.

Anomaly detection plays a significant role in helping gas turbines run reliably and economically. Considering collective anomalous data and both sensitivity and robustness of the anomaly detection model, a sequential symbolic anomaly detection method is proposed and applied to the gas turbine fuel system. A structural Finite State Machine is to evaluate posterior probabilities of observing symbolic sequences and most probable state sequences they may locate. Hence an estimating based model and a decoding based model are used to identify anomalies in two different ways. Experimental results indicates that these two models have both ideal performance overall, and estimating based model has a strong ability in robustness, while decoding based model has a strong ability in accuracy, particularly in a certain range of length of sequence. Therefore, the proposed method can well facilitate existing symbolic dynamic analysis based anomaly detection methods especially in gas turbine domain.

Facial expression has lots of applications in human-computer interaction. Although feature extraction and selection have been well studied, the specificity of each expression variation is not fully explored in state-of-the-art works. In this work, the problem of multiclass expression recognition is converted into triplet-wise expression recognition. For each expression triplet, a new feature optimization model based on Action Unit (AU) weighting and patch weight optimization is proposed to represent the specificity of the expression triplet. Sparse representation based approach is then proposed to detect the active AUs of testing sample for better generalization. The algorithm achieved competitive accuracies of 89.67% and 94.09% for Jaffe and CK+ databases, respectively. Better cross-database performance has also been observed.

More and more works are using machine learning techniques while adopting supervisory control and data acquisition (SCADA) system for wind turbine anomaly or failure detection. While parameter selection is important for modelling a wind turbine’s health condition, only a few papers have been published focusing on this issue and in those papers interconnections among sub-components in a wind turbine are used to address this problem. However, merely the interconnections for decision making sometimes is too general to provide a parameter list considering the differences of each SCADA dataset. In this paper, a method is proposed to provide more detailed suggestions on parameter selection based on mutual information. Moreover, after proving that Copula, a multivariate probability distribution for which the marginal probability distribution of each variable is uniform is capable of simplifying the estimation of mutual information, an empirical copula based mutual information estimation method (ECMI) is introduced for an application. After that, a real SCADA dataset is adopted to test the method, and the results show the effectiveness of the ECMI in providing parameter selection suggestions when physical knowledge is not accurate enough.

The safe and reliable operation of autonomous vehicles in complex and dynamic environments is heavily dependent upon exteroceptive and proprioceptive sensors. A LiDAR system generates accurate 3D point clouds, which are crucial for the detection, classification, and tracking of multiple targets. LiDAR data, however, presents significant challenges due to its density, noise, and varying sampling rates. In this study, various clustering and MTT techniques for LiDAR point clouds will be identified and classified within the context of autonomous driving to assess the state-of-the-art methods’ key challenges and their performances. We have categorized clustering and MTT methods used in AV applications, identified research gaps and challenges and analyzed existing algorithms and their challenges in detail. Researchers and practitioners in the field of autonomous driving will find this review to be a valuable resource.

Distracted driving is the leading cause of accidents, the cause of these distractions may include drowsiness, using cell phone, smoking a cigarette, etc. The proposed paper aims at monitoring the attentiveness of the driver and alerting the driver when his/her alertness goes below a certain threshold. It uses image processing using OpenCV (Computer Vision) and You Look Only Once (YOLO) algorithm to detect the eyes and object respectively and sounds an alarm when the driver is either drowsy or using his cell phone or smoking a cigarette.

More than 700 thousand human deaths from mosquito bites are observed annually in the world. It is more than 2 times the number of annual murders in the world. In this regard, the invention of new more effective methods of protection against mosquitoes is necessary. In this article for the first time, comprehensive studies of mosquito neutralization using machine vision and a 1 W power laser are considered. Developed laser installation with Raspberry Pi that changing the direction of the laser with a galvanometer. We developed a program for mosquito tracking in real. The possibility of using deep neural networks, Haar cascades, machine learning for mosquito recognition was considered. We considered in detail the classification problems of mosquitoes in images. A recommendation is given for the implementation of this device based on a microcontroller for subsequent use as part of an unmanned aerial vehicle. Any harmful insects in the fields can be used as objects for control.

Modern search engines encounter a significant challenge when it comes to handling duplicate and nearly identical web pages, particularly during the indexing process for vast amounts of web content. This issue can lead to slow search results and increased costs due to the accumulation of storage space necessary for storing indexes. To tackle this issue, different techniques have been proposed to find similar websites. However, it has long been a challenge in research to distinguish between web pages. In the current study, sentence-level features i.e., hashcode and thresholding are used to determine the nearly identical web pages. We employ an adaptive threshold that enables the application of our model in both large- and small-scale settings. The benchmark datasets consisting of Shakespeare’s collections, free text, job descriptions, and Reuters-21578 are used to test the proposed approach. With an accuracy of 0.99 and an F1-score of 0.97, the proposed technique outperforms existing methods.

The proliferation of fake news on social media platforms poses significant challenges to information authenticity and public trust. In this study, the impact of various word embedding techniques on the performance of both machine learning and deep learning models for fake news detection is systematically evaluated. The comprehensive TruthSeeker dataset, which spans over a decade of labeled news articles and social media posts, is utilized. Three popular word embedding techniques are analyzed: TF-IDF, Word2Vec, and FastText. These embeddings were tested with multiple machine learning classifiers, including logistic regression, naive Bayes, K-nearest neighbors, support vector machines, multilayer perceptrons, decision trees, and random forests, as well as deep learning models, specifically convolutional neural networks (CNNs). Among machine learning models, the Support Vector Machine (SVM) with TF-IDF achieved the highest accuracy of 99.03%, precision of 98.92%, recall of 99.15%, and F1 score of 99.03%. The Multilayer Perceptron (MLP) also demonstrated strong performance with Word2Vec, reaching an accuracy of 95.24%, precision of 94.95%, recall of 95.50%, and F1 score of 95.07%. For deep learning models, CNNs combined with TF-IDF embeddings showed outstanding results, achieving an accuracy of 98.99%, precision of 98.56%, recall of 99.48%, and F1 score of 99.02%. These results highlight the critical role of word embeddings in enhancing model accuracy and reliability in misinformation detection.

The development of Artificial Intelligence-based tools is having a big impact on industry. In this context, the maintenance operations of important assets and industrial resources are deeply changing both from a theoretical and a practical perspective, even in the field of ship propulsion systems. Namely, conventional preventive maintenance schedules audits and checks at fixed times by using statistics on component failures, but it can be improved by a predictive maintenance based on the real component health status, which is inspected by proper sensors. In this way, time and costs are saved. More in details, data-driven models, through Machine Learning (ML) algorithms, generate the expected values of monitored variables for comparison with real measurements coming from the asset, hence for a diagnosis based on the difference between expectations and observations. Then, a ML-based fault detection starts with the choice of the ML algorithm. This process is often not the consequence of an in-depth deep analysis of the different algorithms available in the literature. For that reason, the authors propose a simple procedure to support a first implementation stage of the so-called Condition Based Maintenance (CBM): a quick benchmarking of the most suitable ML algorithms useful for fault detection. The algorithms are compared by taking into account not only the algorithm output error, shown by the Mean Squared Error between predictions and data, but also the response time, which is a crucial variable for maintenance purpose.

This study investigates anomaly detection of IoT device traffic using Convolutional Neural Networks (CNN) and Variational Autoencoders (VAE) to enhance the detection capability of security threats in IoT environments. A series of hardware configurations, software environments, and hyperparameters were utilized to optimize the training and testing processes of the models. The CNN model demonstrates robust classification performance, achieving an accuracy rate of 95.85% on the test dataset, effectively distinguishing between different types of IoT device traffic. Meanwhile, the VAE model exhibits proficient anomaly detection capabilities by effectively capturing abnormal patterns in the data using reconstruction loss and KL divergence. The combined use of CNN and VAE models offers a comprehensive solution to cybersecurity challenges in IoT environments. Future research directions include exploring diverse IoT traffic data, practical deployment for validation, and further optimization of model structures and parameters to improve performance and applicability.

Traditional computer vision techniques aim to extract meaningful information from images but often depend on manual feature engineering, making it difficult to handle complex real-world scenarios. Fractional Calculus (FC), which extends derivatives to non-integer orders, provides a flexible way to model systems with memory effects and long-term dependencies, making it a powerful tool for capturing fractional rates of variation. Recently, Neural Networks (NNs) have demonstrated remarkable capabilities in learning complex patterns directly from raw data, automating computer vision tasks and enhancing performance. Therefore, the use of fractional calculus in neural network-based computer vision is a powerful method to address existing challenges by effectively capturing complex spatial and temporal relationships in images and videos. This paper presents a survey of Fractional Calculus Neural Network-based (FC NN-based) computer vision techniques for denoising, enhancement, object detection, segmentation, restoration, and NN compression. The survey compiles existing FFC NN-based approaches, elucidates underlying concepts, and identifies open questions and research directions. By leveraging FC's properties, FC NN-based approaches offer a novel way to improve the robustness and efficiency of computer vision systems.

This paper presents a comprehensive study on applying machine learning (ML) techniques for real-time credit card fraud detection. With the increasing prevalence of credit card fraud, financial institutions face the challenge of detecting fraudulent transactions promptly and accurately. This research evaluates various ML models, including Logistic Regression, Decision Trees, Random Forests, XGBoost, and Deep Convolutional Neural Networks, for their effectiveness in identifying fraudulent activities. Utilizing PySpark for processing large-scale transaction data, the study highlights the importance of real-time analysis, adaptive learning, and handling imbalanced datasets. Key findings reveal that XgBoost, with its balance of accuracy and complexity, emerged as the most promising model, achieving an accuracy rate of 98% in detecting fraudulent transactions. The paper further discusses the potential of ensemble methods, graph-powered systems, and intelligent sampling in enhancing fraud detection capabilities. Challenges such as overfitting, data access, and the need for real-time analysis are addressed. Future research directions include implementing models in live transaction environments, expanding model applicability across financial platforms, and developing advanced anomaly detection methodologies. This study underscores the pivotal role of machine learning in safeguarding financial transactions against fraud, offering significant implications for consumers, financial institutions, and the broader financial ecosystem.

Porcine parvovirus 8 (PPV8), a novel virus in the Parvoviridae family, was first identified in 2022 in lung samples of domestic pigs from China. Retrospective analyses showed that it had been circulating in China since 1998, but no other countries had reported its presence so far. A recent study conducted in South America did not detect any PPV8-positive samples in that region. Here we report the detection of PPV8 in Hungarian and Slovakian pig farms and the estimated prevalence of the virus in Hungary. Altogether 2230 serum, 233 oral fluid, and 115 processing fluid samples were systematically collected from 23 Hungarian and 2 Slovakian pig farms between 2020 and 2023. A real-time quantitative PCR method was developed to detect the viral genome. Our results revealed the presence of PPV8 on 65% of the Hungarian farms and on both Slovakian farms included in our study, marking its first detection in Europe. Oral fluid samples showed the highest positivity rates, reaching up to 100% in some herds. The viral genome was successfully detected in serum and processing fluid samples too, but with significantly lower prevalence rates of 4% and 5%, respectively. Genetic analysis of 11 partial VP2 sequences demonstrated high similarity to the original Chinese strain but with unique amino acid mutations, suggesting possible local evolution of the virus. Our study presents the first scientific evidence of PPV8 infection outside of China and offers a comprehensive assessment of its prevalence in the Hungarian pig population. Further research is required to understand its potential impact on swine health.

This article focuses on generating an alternative in order to identify traffic officers during driving. This research employed the latest You Only Look Once (YOLO) model, using a six-phase methodology: data collection, data preparation involving resizing and labeling, implementation of various filters to avoid overfitting, model training, prediction evaluation, and result interpretation. The YOLO model was applied across three iterations using a dataset of 1862 images. To enhance training efficiency and detection speed, the graphics processing unit (GPU) acceleration was utilized, further enhancing the experimental process. The results of this study revealed that the YOLOv8x variant produced the most promising results. This proposed model attained a remarkable F1 score of 0.95, bolstered by a confidence score of 0.631, with the potential for an increase to 0.80 in confidence without significantly compromising the F1-score. These findings are poised to make a substantial contribution to the broader research landscape, particularly in advancing the effectiveness of detection models for traffic officers.

Recent advancements in computer vision, especially deep learning models, have shown considerable promise in tasks related to plant image object detection. However, the efficiency of these deep learning models heavily relies on input image quality, with low-resolution images significantly hindering model performance. Therefore, reconstructing high-quality images through specific techniques will help extract features from plant images, thus improve model performance. In this study, we explored the value of super-resolution technology for improving object detection model performance on plant images. Firstly, we built a comprehensive dataset comprising 1030 high-resolution plant images, named the PlantSR dataset. Subsequently, we developed a super-resolution model using the PlantSR dataset and benchmarked it against several state-or-the-art models designed for general image super-resolution tasks. Our proposed model demonstrated superior performance on the PlantSR dataset, indicating its efficacy in enhancing the super-resolution of plant images. Furthermore, we explored the effect of super-resolution on two specific object detection tasks: apple counting and soybean seed counting. By incorporating super-resolution as a pre-processing step, we observed a significant reduction in mean absolute error. Specifically, on the YOLOv7 model employed for apple counting, the mean absolute error decreased from 13.085 to 5.71. Similarly, on the P2PNet-Soy model utilized for soybean seed counting, the mean absolute error decreased from 19.159 to 15.085. These findings underscore the substantial potential of super-resolution technology in improving the performance of object detection models for accurately detecting and counting specific plants from images. The source codes and associated datasets are available at https://github.com/SkyCol/PlantSR.

This work presents a Fault-Tolerant Model Predictive Control (FTMPC) algorithm applied to a simulation model for sewer networks. The control system will aim to prevent contaminated water from escaping the network, especially during periods of heavy rainfall, that can cause combined sewer overflows (CSO), while maintaining the flow of water towards the wastewater treatment plant (WWTP) as close as possible to its nominal value. The main purpose of the work is to preserve the operation of the predictive controller as much as possible, in accordance with its operational objectives, when there may be anomalies affecting the elements of the control system, mainly sensors and actuators. Comparing the results obtained considering various types of faults, with situations of normal controlled operation and with the behavior of the sewer network when no control is applied, will allow some conclusions to be drawn at the end.

This literature review delves into the realm of fault detection techniques for transmission lines, aiming to provide a comprehensive overview of recent advancements and key trends in the field. Employing a structured approach, the review synthesizes a plethora of research spanning from 2019 to 2024, sourced from diverse databases including IEEE Xplore, ScienceDirect, ResearchGate, Scopus, Litmaps, and Google Scholar. The methodology encompasses a systematic literature search protocol, stringent inclusion and exclusion criteria, meticulous data extraction, and a multi-dimensional analysis framework. The literature review uncovers a spectrum of fault detection methodologies, ranging from traditional signal processing techniques like Discrete Wavelet Transform and phase angle-based methods to cutting-edge deep learning algorithms such as Capsule Networks and Convolutional Neural Networks. Insights gleaned from the review underscore the critical importance of fault detection in maintaining the reliability, safety, and efficiency of power grids, highlighting its role as a frontline defense against widespread outages and equipment damage. Key findings from the review shed light on the efficacy of different fault detection approaches, showcasing their strengths and limitations across diverse system conditions. Furthermore, the review identifies common trends and challenges, including the need for real-world validation, scalability, adaptability to various network configurations, and cybersecurity considerations. This literature provides valuable insights and recommendations for future research endeavors in fault detection for transmission lines. By embracing advancements in both traditional and emerging techniques, researchers can continue to enhance the resilience and dependability of power transmission systems, ensuring their ability to withstand evolving challenges and safeguard critical infrastructure.

Financial fraud poses a severe threat to the integrity of corporate financial statements and market efficiency. While auditors play a crucial role in detecting and preventing such fraud, the unique characteristics of this domain, including class imbalance, high misclassification costs, and am-biguous attributes, pose significant challenges. Traditional classification algorithms may not be optimally suited for this task. This paper proposes a novel stacking ensemble learning approach to enhanced detecting of Financial Statement Scam. By combining the strengths of multiple base learners, including Random Forest, XGBoost, and Gradient Boosting Decision Trees, our model leverages their diverse predictions to improve overall performance. A Logistic Regression me-ta-learner is employed to integrate the outputs of the base learners, capturing their collective wisdom while mitigating individual weaknesses. Extensive experimentation using a real-world dataset shown the superiority of our approach, achieving remarkable recall, precision, accuracy, and area under the curve metrics. The proposed model outperforms individual base learners, under-scoring the efficacy of ensemble learning in tackling the intricate problem of financial fraud detection. This research contributes to the creation of substantial and robust fraud detection systems, fostering trust and transparency in financial markets.

A recent study showed the potential of DA Perten 7200 NIR Spectrometer in detecting chlorpyrifos-methyl pesticide residue in rough, brown, and milled rice. However, this instrument is still lab-based and generally suited for point-of-sale testing in many countries. To provide a field deployable version of this technique, an existing light emitting diode (LED)-based instrument which provide discrete NIR wavelength illumination and reflectance spectra over the range of 850-1550 nm was tested. Spectra were collected from rough, brown, and milled rice at different pesticide concentrations and analysed for quantitative and qualitative measurement using partial least squares regression (PLS) and discriminant analysis (DA). Simulations for LED-based instruments were also evaluated using segments of spectra from the DA7200 to represent LED illumination. For the simulation of the existing LED-based instrument (LEDPrototype1) using their wavelengths range yielded 70.4% to 100% correct classification. Simulation of a second LED instrument, LEDPrototype2, with spectral segments selected based on significant wavelength regions from PLS regressions coefficients obtained from the DA7200 showed improved performance with R2 of 0.59 to 0.82 and correct classifications of 71.3 to 100%. An actual LED based instrument with this capability could provide a quick screening tool to determine if MRLs are exceeded.

The production of cheese, a beloved culinary delight worldwide, faces challenges in maintaining consistent product quality and operational efficiency. One crucial stage in this process is determining the precise cutting time during curd formation, which significantly impacts the quality of the cheese. Misjudging this timing can lead to the production of inferior products, harming a company's reputation and revenue. Conventional methods often fall short of accurately assessing variations in coagulation conditions due to the inherent potential for human error. To address this issue, we propose an anomaly detection-based approach. In this approach, we treat the class representing curd formation as the anomaly to be identified. Our proposed solution involves utilizing a one-class, fully convolutional data description network, which we compared against several state-of-the-art methods to detect deviations from the standard coagulation patterns. Encouragingly, our results show F1 scores of up to 0.92, indicating the effectiveness of our approach.

Oral cancer represents a significant global public health challenge, contributing substantially to cancer incidence and mortality. Despite established risk factors such as tobacco use and alcohol consumption, early detection remains crucial for effective treatment. This study introduces a novel approach using a transistor-based biosensor system for detecting the P90 (CIP2A) protein. We have tested the presence of CIP2A in human leukoplakia samples that can rise into oral squamous cell carcinoma. The method employs commercially available glucose test strips functionalized with P90 antibodies, providing high sensitivity and a low limit of detection, which is five orders lower than commercial ELISA kits. A specially designed printed circuit board (PCB) facilitates accurate measurements, and the device's performance is optimized through characteristic tests. Human sample testing validates the biosensor's effectiveness in distinguishing samples after cell lysis. This study contributes to advancing accurate and cost-effective diagnostic approaches for oral pre-cancer and cancer tissues.

This work presents preliminary experimental results advancing non-destructive testing methods for detecting steel bars in concrete structures via contactless investigation in the X-band spectrum. The study reveals the field’s penetration into concrete, extracting insights into embedded bars through scattered data. Applying a quasi-quadratic inverse scattering technique to numerically simulated data yields promising results, confirming the effectiveness and reliability of the proposed approach. In this realm, using a higher frequency allows the use of lighter equipment and smaller antennas. Identified areas for improvement include accounting for antenna behavior and establishing undeformed target morphology and precise orientation. Transitioning from powder-based and sand specimens to real solid reinforced concrete structures is expected to alleviate laboratory challenges. Although accurately determining concrete properties such as relative permittivity and conductivity is essential, it remains beyond the scope of this study. Finally, overcoming these challenges could significantly enhance non-invasive testing, improving structural health monitoring and disaster prevention.

We propose a novel unsupervised semantic segmentation method for fast and accurate flood area detection utilizing color images acquired from Unmanned Aerial Vehicles (UAVs). To the best of our knowledge, this is the first fully unsupervised method for flood area segmentation in color images captured by UAVs, without the need of pre-disaster images. The proposed framework addresses the problem of flood segmentation based on parameter-free calculated masks and unsupervised image analysis techniques. First, a fully unsupervised algorithm gradually excludes areas classified as non-flood utilizing calculated masks over each component of the LAB colorspace, as well an RGB vegetation index and the detected edges of the original image. Unsupervised image analysis techniques, such as distance transform, are then applied, producing a probability map for the location of flooded areas. Finally, flood detection is obtained by applying the hysteresis thresholding segmentation. The proposed method is tested and compared with variations, and other supervised methods in two public datasets, consisting of 953 color images in total, yielding high-performance results, with 87.4% and 80.9% overall accuracy and F1-Score, respectively. The results and computational efficiency of the proposed method show that it is suitable for on board data execution and decision-making during UAVs flight.

This paper presents a theoretical framework aimed at improving IoT network cybersecurity by AI-driven anomaly detection in the context of rapid urbanization and the development of smart cities. The framework draws upon the Complex Adaptive Systems Theory, Theory of Planned Behavior, the Technology Acceptance Model, and the Socio-Technical Systems Theory, and intri-cately examines how AI might be integrated into the intricate ecosystem of smart cities to detect and mitigate cyber threats. It emphasizes AI-driven anomaly detection methods as pivotal in-struments that impact cybersecurity enhancement in smart city infrastructures. The proposed framework also highlights the crucial role that human-related factors, including user behavior and adoption, play in determining how effective AI applications are in enhancing cybersecurity in smart cities. It also recognizes the important moderating roles played by outside factors like legislative frameworks, environmental contexts, and technological breakthroughs in the relationship between AI-enabled anomaly detection and enhanced cybersecurity. The goal of this research is to shed light on the interactions between technology and socio-technical dynamics by offering a thorough theoretical understanding of AI's potential in smart city cybersecurity. It highlights the significance of taking into account a variety of contextual aspects when employing AI to strengthen the digital security of urban areas, and provides a strategic direction for future research and practical implementation.

Few-shot object detection (FSOD) aims to address the challenge of requiring a substantial amount of annotations for training in conventional object detection, which is very labor-intensive. However, existing few-shot methods achieve high precision with the sacrifice of time-consuming for exhaustive fine-tuning, or take poor performance in novel-class adaptation. We presume the major reason is that the valuable correlation feature among different categories is insufficiently exploited, hindering the generalization of knowledge from base to novel categories for object detection. In this paper, we propose Few-Shot object detection via Correlation-RPN and Transformer Encoder-Decoder (CRTED), a novel training network to learn object-relevant features of inter-class correlation and intra-class compactness while suppressing object-agnostic features in the background with limited annotated samples. And we also introduce a 4-way tuple-contrast training strategy to positively activate the training progress of our object detector. Experiments over two few-shot benchmarks (Pascal VOC, MS-COCO) demonstrate that, our proposed CRTED without further fine-tuning can achieve comparable performance with current state-of-the-art fine-tuned works. The codes and pre-trained models will be released.

The term "code smell" refers to an indication of a problem with the quality of source code. Numerous studies have been conducted to identify problematic features in source code. Initially, the focus was on utilizing metric-based and heuristic-based approaches. In recent years, however, there has been a shift towards using machine learning and deep learning (DL) techniques for smell detection. Nevertheless, the current algorithms are still considered to be in the early stages of development. Recognizing the challenges associated with identifying smells using DL methods, both academics and software developers have made efforts to address these obstacles. This work involves constructing and evaluating new DL models for code smell detection. Two models are built upon stacked autoencoders, employing a hybrid architecture that combines bidirectional long short-term memory and convolutional neural network components.

Detection of subsurface archaeological remains using a range of remote sensing methods, poses several challenges until today. Recent studies regarding the detection of archaeological proxies like those of cropmarks highlight the complexity of the phenomenon. In this work we present three different methods, and associated indices, for identifying stressed reflectance signatures indicating buried archaeological remains, based on a dataset of measured ground spectroradiometric reflectance. Several spectral profiles between the visible and near infrared part of the spectrum, were taken over a controlled environment in Cyprus during the 2011-2012 and are re-used in this study. The first two (spectral) methods are based on a suitable analysis of the spectral signatures in (1) the visible part of the spectrum, and in particular in the neighborhood of 570 nm, and (2) the red edge-near infrared part of the spectrum, in the neighborhood of 730 nm. Machine learning (decision trees) allows for the deduction of suitable wavelengths to focus on, in order to formulate the proposed indices and the associated classification criteria (decision boundaries) that can enhance the detection probability of stressed vegetation. Noise in the signal is taken into account by simulating reflectance signatures perturbed by white noise. Applying decision tree classification on the ensemble of simulations and basic statistical analysis we refine the formulation of the indices and criteria for the noisy signatures. The success rate of the proposed methods is over 90%. The third method rests on the estimation of vegetation/canopy reflectance parameters through inversion of the physical-based PROSAIL reflectance model and the associated classification through machine learning methods. The obtained results provide further insights into the formation of stress vegetation that occurred due to the presence of shallow buried archaeological remains, which are well aligned with physical-based models and existing empirical knowledge. To the best of the authors' knowledge, this is the first study demonstrating the usefulness of radiative transfer models such as PROSAIL for understanding the formation of cropmarks. Similar studies can support future research directions towards the development of regional remote sensing methods and algorithms if systematic observations are adequately dispersed in space and time.

Pavement crack detection is one of the key links in highway pavement maintenance management. In the current road crack detection, the network model easily ignores the shallow geometric features of cracks and cannot extract the key feature information of cracks. Aiming at the above problems, an EC-YOLOX network model is proposed. The CFPN is constructed to cross-fuse different scale features to solve the feature scale invariance. In the strengthen feature extraction layer, ECANet is fused to enhance the ability to pay attention to key information. The WEIoU loss function is proposed, which assigns different penalty terms to the target box in the vertical and horizontal directions. In terms of data, geometric distortion constraint correction is performed on the single-point perspective pavement image. The experimental data show that the accuracy of EC-YOLOX on the self-built data set reaches 76.34% [email protected], which is 4.45% higher than that of YOLOX. The loss curve of EC-YOLOX is smoother than that of YOLOX, and the minimum training loss value is 2.136, which is 0.648 lower than the minimum loss value 2.784 of YOLOX. Many experiments have verified the effectiveness of EC-YOLOX in improving the detection effect in pavement crack detection.

The rapid evolution of technology has given rise to a connected world, where billions of devices interact seamlessly, forming what is known as the Internet of Things (IoT). While IoT offers incredible convenience and efficiency, it presents a significant challenge in cybersecurity and is characterized by various power, capacity, and computational process limitations. Machine learning techniques are employed within Intrusion Detection Systems (IDS) to enhance their capabilities in identifying and responding to security threats. The key features selected to improve IDS efficiency and reduce dataset size, thereby decreasing the time required for attack detection, are drawn from the extensive network dataset. This paper introduces an enhanced feature selection method designed to reduce the computational overhead on IoT resources while simultaneously strengthening intrusion detection capabilities within the IoT environment. Experimental results based on the InSDN dataset demonstrate that our proposed methodology achieves the highest accuracy with the fewest number of features and low computational cost. Specifically, we attain a 99.99% accuracy with 11 features and a computational time of 0.8599 seconds.

In this paper we develop and explore a methodical pipeline for swimmer localisation in outdoor environments. The developed framework is intended to be used for enhancing swimmer safety. A main issue we deal with by the proposed approach is the lack of real world training data in such outdoor environments. Natural lighting changes, dynamic water textures and possibly barely visible swimming persons are key elements to approach. We account for these difficulties by adopting an effective background removal technique with available training data. This allows us to edit swimmers into natural environment backgrounds for the use in subsequent image augmentation. We created 17 training datasets with real images, synthetic images and a mixture of both to investigate different aspects and characteristics of the proposed approach. The datasets are used to train a YOLO architecture for the possible future application in real-time detection. The trained framework is then tested and evaluated on outdoor environment imagery acquired by a safety drone to investigate and confirm the usefulness for outdoor swimmer localisation.

The ubiquitous problem of electrical energy waste is driven by human error, in which people regularly forget to turn off appliances when they leave a room, resulting in excessive consumption. The paper presents an energy-efficient TRIZ-inspired (EETRIZ) paradigm to automate consumer electronic devices in order to address this problem. Employing motion detection at entry and exit points, the system discerns room occupancy, effectively managing electrical appliances like lamps, fans, and air conditioners. The integration of theory of inventive problem solving (TRIZ) principles guides the ideation and design of an efficient switching mechanism. The system demonstrates that it is flexible by controlling multiple electronic consumer devices simultaneously. This paradigm can be used in a variety of environments, such as homes, offices, schools, and universities, and its goal is to reduce excessive energy use that results from human negligence. With an emphasis on economic viability and environmental impact, the proposed EETRIZ paradigm not only offers enhanced energy efficiency but also lays the groundwork for long-term sustainability practices, aligning with global efforts towards greener and smarter energy management. The proposed EETRIZ is implemented on C platform with support of MPLAB, Nuvoton 8051 Serie MCU Programming, GMPLibrary (GMP-5.1.1) and, Miracl Library. The proposed EETRIZ outperforms current state-of-the-art methods in terms of energy efficiency, cost-effectiveness, precision, and user-friendliness, according to hardware testing.

This study examined the efficiency of a combined diagnostic approach in which bioamplification of Arizona 861 S1 citron was integrated with RT‒PCR to detect Citrus tristeza virus (CTV) and Hop Stunt Viroid (HSVd) in Citrus plants. The capacity of the combined method to diagnose mixed infections of CTV and HSVd, along with early single infections of both pathogens, was assessed by evaluating the incubation periods and differential detection capabilities between the combined and direct methods. The bioamplification method exhibited high sensitivity (100%) and specificity (100%) for CTV, enabling early detection even in patients with low-titer infections compared to direct RT‒PCR. However, for HSVd, the combined method achieved 50% sensitivity in early infections, highlighting the need for additional replicates to enhance diagnostic reliability. The relative concentrations of pathogens in mixed and simple infections were evaluated; the analysis revealed no significant differences, suggesting minimal interference between CTV and HSVd. This approach allows early detection of CTV but requires further refinement for HSVd diagnosis. These findings underscore the complementary roles of the cost-effectiveness of direct RT‒PCR and the sensitivity of the combined method in implementing effective disease control strategies in citrus crops.

This study develops a 7-layer Long Short-Term Memory (LSTM) model to enhance early diabetes detection in Oman, aligning with the theme of 'Artificial Intelligence in Healthcare'. The model focuses on addressing the increasing prevalence of Type 2 diabetes, projected to impact 23.8% of Oman's population by 2050. It employs LSTM neural networks to manage factors contributing to this rise, including obesity and genetic predispositions, and aims to bridge the gap in public health awareness and prevention. The model's performance is evaluated through various metrics. It achieves an accuracy of 99.40%, specificity and sensitivity of 100% for positive cases, a recall of 99.34% for negative cases, an F1 score of 96.24%, and an AUC score of 94.51%. These metrics indicate the model's capability in diabetes detection. The implementation of this LSTM model in Oman's healthcare system is proposed to enhance early detection and prevention of diabetes. This approach reflects an application of AI in addressing a significant health concern, with potential implications for similar healthcare challenges globally.st diagnostic capabilities, representing a significant leap forward in healthcare technology in Oman.

In areas where conventional fundus cameras are logistically unaffordable, the smartphone-based approach is considered as a promising future of glaucoma screening due to their affordability and ease-of-use. Optic disc localization is a critical stage during glaucoma screenings. For fundus images captured with standard fundus cameras, the majority of the models available out there can locate the optic disc with satisfactory performance. However, for images that are captured with smartphone-based fundus cameras, the inherent noise and lower quality of the fundus image makes it difficult for models to detect the optic disc region. In this study, we have proposed to utilize YOLOv8n for optic disc localization due to the model’s cutting-edge performance in diverse tasks and its lightweight nature. We have used a public dataset which has 2000 low quality fundus images that are captured using a smartphone-based fundoscopy device. From these, 60% of the data was used for fine-tuning the model, and 25% for testing. By using a confidence of 50% set as threshold, the model was able to detect the optic disc successfully on over 97% of test images with intersection over union of above 0.85. These results highlight the potential of the lightweight YOLOv8n model for deployment on resource-constrained environments, offering a promising performance on accurately localizing the OD and enhancing the feasibility of affordable glaucoma screening on smartphones.

Fiber-based flexible sensors have promising applications potential in human motion and healthcare monitoring, owing to their merits of lightweight, flexibility, and easy processing. Now, high-performance elastic fiber-based strain sensors with high sensitivity, large working range and excellent durability are in great demand. Herein, we have easily and quickly prepared a highly-sensitive, durable fiber-based strain sensor by dip-coating of highly-stretchable polyurethane (PU) elastic fiber in MXene/ waterborne polyurethane (WPU) dispersion solution. Benefiting from the electrostatic repulsion force between the negatively charged WPU and MXene sheets in the mixed solution, very homogeneous and stable MXene/WPU dispersion was successfully obtained and the interconnected conducting networks were correspondingly formed in coated MXene/WPU shell layer, which makes as-prepared strain sensor exhibit a gauge factor of over 960, a large sensing range of over 90% and detection limit as low as 0.5% strain. As elastic fiber and mixed solution have the same polymer constitute, tight bonding of MXene/WPU conductive composite on PU fibers was achieved, enabling the as-prepared strain sensor endure over 2500 stretching-releasing cycles and thus show good durability. Full-scale human motion detection was also performed by the strain sensor, and a body posture monitoring, analysis, and correction prototype system was developed via embedding the fiber-based strain sensors into sweater, strongly indicating the great application prospect in exercise, sports and healthcare.

Detecting rotated objects in remote sensing images poses a substantial challenge. These images usually cover a wide field of view, containing diverse and complex backgrounds with variously sized ground objects densely distributed. Therefore, identifying objects of interest in remote-sensing images is challenging. While integrating Convolutional Neural Networks (CNNs) and Transformer networks has exhibited progress in detecting rotated objects, there is still scope for enhancing feature extraction and fusion. To address this issue, we propose a feature extraction module, a feature context aggregation module, and a multi-scale feature fusion module. Initially, we substitute the Spatial Pyramid Pooling Bottleneck (SPPFBottleneck) with a new module aimed at extracting multi-scale features, thereby enhancing the detection of small objects in complex backgrounds. Next, we develop a novel module for the multi-scale fusion of contextual information within feature maps, extracting valuable information. Finally, we combine the original features with the fused ones to prevent the loss of specific features in the fusion process. We refer to our newly proposed model as the "Multi-scale Feature Context Aggregation Network" (MFCANet). We assess our approach on three challenging remote sensing datasets: MAR20, SRSDD, and HRSC. Comprehensive experimental results show that our method surpasses baseline models by 2.13%, 10.28%, and 1.46% mAP on the MAR20, SRSDD, and HRSC datasets, respectively.

Porous structures and micropatterning surfaces play a crucial role in the development of highly sensitive force sensors. However, achieving these two conductive architectures typically requires complex materials synthesis and expensive manufacturing processes. In this study, we introduce a novel conductive composite film featuring a porous/micropyramid hybrid conductive architecture, which is achieved through a straightforward process of materials mixing and one-step screen printing. By utilizing a deep eutectic solvent in the ink component, micropores are induced in the printed composite, while the mesh of the screen mask acts as a template, resulting in a micropyramid film surface. We have successfully realized highly sensitive flexible force sensors with multifunctional capabilities for perceiving normal force and shear force.

Ransomware attacks have risen alarmingly, with encryption techniques becoming more complex. This paper introduces a novel detection model tailored for ransomware's distinctive characteristics. The Intel PIN tool extracts Windows API invocation sequences related to file operations. These sequences are used to construct n-grams, forming feature vectors enhanced by a new Class Feature Weighting (CFW) metric to improve malware detection. Preliminary results demonstrate elevated accuracy and precision versus existing methods. The major contributions are: (1) Introducing an innovative deep learning model for few-shot ransomware classification using entropy features and transfer learning. (2) Achieving high weighted F1-score in classifying ransomware variants into families with limited training data. (3) Demonstrating the potential of entropy-based features to capture intricacies lost in image-based approaches, improving detection of new strains.

Multi-Object Tracking (MOT) is a key technology for Unmanned Aerial Vehicles (UAVs). Traditional tracking-by-detection methods firstly employ an object detector to retrieve targets in each image and then track them based on a matching algorithm. Recently, the popular multi-task learning methods has been dominating this area since they can detect targets and extract Re-Identification (Re-ID) features in a computationally efficient way. However, the detection task and the tracking task have conflicting requirements on image features, leading to the poor performance of the joint learning model compared to separate detection and tracking methods. The problem is more severe when it comes to UAV images due to the presence of irregular motion of large number of small targets. In this paper, we propose a balanced Joint Detection and Re-ID learning (JDR) network to address the MOT problem in UAV vision. To better handle the non-uniform motion of objects in UAV videos, the Set-Member Filter is applied which describes object state as a bounded set. An appearance matching cascade is then proposed based on target state set. Furthermore, a Motion-Mutation module is designed to address the challenges posed by the abrupt motion of UAV. Extensive experiments on the VisDrone-MOT2019 dataset demonstrate that our proposed model, termed as SMFMOT, outperforms state-of-the-arts by a large margin and achieves superior performance on the MOT tasks in UAV videos.

Audio recording in classrooms is a common practice in educational research, with applications ranging from detecting classroom activities to analysing student behaviour. Previous research has employed neural networks for classroom activity detection and speaker role identification. However, these recordings are often affected by background noise that can hinder further analysis, and the literature has only sought to identify noise with general filters and not specifically designed for classrooms. Although the use of high-end microphones and environmental monitoring can mitigate this problem, these solutions can be costly and potentially disruptive to the natural classroom environment. In this context, we propose the development of a neural network model that can specifically detect and filter out background noise in classroom recordings. This model would allow the use of lower quality recordings without compromising analysis capability, thus facilitating data collection in natural educational environments and reducing the costs associated with high-end recording equipment.

Early onset neonatal sepsis is a significant contributor to neonatal morbidity and mortality. Although blood cultures remain the diagnostic gold standard, they detect pathogens in only a minority of suspected cases. This study compared the accuracy of blood cultures with a rapid multiplex PCR test. Newborns at risk for neonatal sepsis were prospectively screened as recommended per national guidelines. Evaluations included laboratory parameters (CrP, IL6, differential blood count), blood culture, and a molecular multiplex PCR test (ROCHE LightCycler SeptiFast) identifying 20 common microbial agents. Blood samples were taken simultaneously from umbilical cord or venous sources on the first day of life. Of 229 infants included, 69% were born preterm. Blood culture and multiplex PCR sensitivity were 7.4% and 11.1% respectively. Specificity, negative and positive predictive values between methods showed no significant variance, though multiplex PCR had more false positives due to contamination. The limited sensitivity of blood cultures for early onset neonatal sepsis is concerning. Despite quicker results, multiplex PCR does not enhance diagnostic accuracy or antibiotic therapy guidance, thus it can not be recommended for this indication.

In Holter monitoring, the precise detection of standard heartbeats and Ventricular Premature Contractions (PVCs) is paramount for accurate cardiac rhythm assessment. This study introduces a novel application of the 1D U-Net neural network architecture aimed at enhancing PVC detection in Holter recordings. Training data comprised the Icentia11k, INCART DB, and our custom dataset. The model’s efficacy was subsequently validated against traditional Holter analysis methodologies across multiple databases, including AHA DB, MIT 11 DB, NST, and another custom dataset encompassing challenging real-world examples. The results underscored the 1D U-Net model’s prowess in QRS complex detection, achieving near-perfect balanced accuracy scores across all databases. PVC detection exhibited variability, with balanced accuracy scores ranging from 0.909 to 0.986. Despite some databases, like the AHA DB, showcasing lower sensitivity metrics, their robust balanced accuracy accentuates the model’s equitable performance in discerning both false positives and negatives. In conclusion, while the 1D U-Net architecture is a formidable tool for QRS detection, there’s a clear avenue for further refinement in its PVC detection capability, given the inherent complexities and noise challenges in real-world PVC occurrences.

Hydrogen peroxide (H2O2) is an essential analyte for detecting neurodegenerative diseases and in-flammatory processes and plays a crucial role in pharmaceutical, food industry, and environmental monitoring. However, conventional H2O2 detection methods have drawbacks such as lengthy analysis time, high costs, and bulky equipment. Non-enzymatic sensors have emerged as promising alternatives to overcome these limitations. In this study, we introduce a simple, portable, and cost-effective non-enzymatic electrochemical sensor based on carbon black (CB) and silver nano-particle-modified δ-FeOOH (Ag/δ-FeOOH), integrated into a disposable electrochemical cell (DCell). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and electrochemical impedance spectroscopy (EIS), confirmed successful CB and Ag/δ-FeOOH immo-bilization on the DCell working electrode. Electrochemical investigations revealed that the DCell-CB//Ag/δ-FeOOH sensor exhibited an approximately twofold higher apparent heterogene-ous electron transfer rate constant than the DCell–Ag/δ-FeOOH sensor, capitalizing on CB ad-vantages. Moreover, the sensor displayed excellent electrochemical response for H2O2 reduction, boasting a low detection limit of 22 µM and a high analytical sensitivity of 214 μA mM-1 cm-2. Notably, the DCell-CB//Ag/δ-FeOOH sensor exhibited outstanding selectivity for H2O2 detection, even in potential interferents such as dopamine, uric acid, and ascorbic acid. Furthermore, the sensor demonstrated its suitability for monitoring H2O2 in complex biological samples, as evidenced by H2O2 recoveries ranging from 92% to 103% in 10% fetal bovine serum. These findings underscore the considerable potential of the DCell-CB//Ag/δ-FeOOH sensor for precise and reliable H2O2 monitoring in diverse biomedical and environmental applications.

For autonomous driving, perception is a primary and essential element that fundamentally deals with the insight into the ego vehicle’s environment through sensors. Perception is a challenging task suffering from dynamic objects and continuous environmental changes. The issue gets worse due to interrupting the quality of perception by adverse weather like snow, rain, fog, night light, sand storm, strong daylight, etc. In this work, we have tried to improve camera-based perception accuracy, such as autonomous driving-related object detection in adverse weather. We proposed the improvement of YOLOv8-based object detection in adverse weather through transfer learning using merged data from various harsh weather datasets. Two prosperous open-source datasets (ACDC and DAWN) and their merged dataset were used to detect primary objects on the road in harsh weather. A set of training weights were collected from training on the individual datasets, their merged version, and several subsets of those datasets according to their characteristics. A comparison between the training weights also occurred by evaluating the detection performance on the above-mentioned datasets and their subsets. The evaluation revealed that using custom datasets for training significantly improves the detection performance compared to the YOLOv8 base weights. And using more images through the feature-related data merging technique steadily increases the object detection performance.

Quality control is a critical component in industrial manufacturing, directly influencing efficiency, product reliability, and ultimately, customer satisfaction. In the dynamic environment of industrial manufacturing, traditional methods of inspection may not adequately meet the evolving complexity, necessitating innovative approaches to bolster precision and productivity. In this study, we explore the application of mixed reality (MR) technology for real-time quality control in the assembly process. Our methodology involved the integration of smart glasses with a server-based image recognition system, designed to conduct real-time component analysis. The innovative aspect of our study lies in the harmonization of MR and computer vision algorithms, providing immediate visual feedback to inspectors and thereby improving the speed and accuracy of defect detection. YOLOv8 have been adopted in this study for detection object model. The project implementation occurred in a controlled environment to enable a comprehensive evaluation of the system functionality, the identification of possible problems and improvements in the system performance. The results indicated the viability of mixed reality as a powerful tool for enhancing traditional inspection processes. The fusion of MR and computer vision offers possibilities for future advancements in industrial quality control, paving the way for more efficient and reliable manufacturing ecosystems.

With demand for the long-term continued use of existing building facilities, structural health monitoring and damage detection are attracting interest from society. Sensors of various types have been practically applied in the industry to satisfy this need. Among the sensors, piezoelectric sensors are an extremely promising technology by virtue of their cost advantages and durability. Although they have been used in aerospace and civil engineering, their application for building engineering remains limited. Remarkably, recent catastrophic seismic events have further rein-forced the necessity of rapid damage detection and quick judgment about the safe use of facilities. Faced with these circumstances, this study was conducted to assess the applicability of piezoelectric sensors to evaluate building components. Specifically, this study emphasizes structural damage caused by earthquakes. After first applying to cyclic loading tests to composite beam component specimens and steel frame subassemblies with a folded roof plate, the prospective damage posi-tions were also found using finite element analysis. Crack propagation and buckling locations were predicted adequately. The piezoelectric sensors provided output when the concrete slab showed tensile cracks, or when the folded roof plate experienced local buckling. Furthermore, damage expansion and progression were detected multiple times during loading tests. Results showed that the piezoelectric sensors can detect structural damage of building components, demonstrating their potential for use in inexpensive and stable monitoring systems.

Oriented object detection is a challenging task in scene text detection and remote sensing image analysis, which has attracted extensive attention in recent years with the development of deep learning. Currently, mainstream oriented object detectors are based on preset anchor boxes. This method increases the computational load of the network and cause a large amount of anchor box redundancy. To solve this problem, we propose anchor-free oriented object detection based on the Gaussian centerness(AOGC), a single-stage anchor-free detection method. Our method uses contextual attention FPN(CAFPN) to obtain the contextual information of the target. Then we design a label assignment method for oriented objects. Finally, we develop a Gaussian kernel-based centerness branch, which can effectively determine the significance of different anchors. AOGC achieves mAP of 74.30% on the DOTA-1.0 datasets and 89.80% on the HRSC2016 datasets, respectively. AOGC exhibits superior performance to other methods in oriented anchor-free object detection methods.

Animal viruses are a significant threat to animal health and are easily spread across the globe with the rise of globalization. The limitations in diagnosing and treating animal virus infections have made the transmission of diseases and animal deaths unpredictable. Therefore, early diagnosis of animal virus infections is crucial to prevent the spread of diseases and reduce economic losses. To address the need for rapid diagnosis, electrochemical sensors have emerged as a promising tool. Electrochemical methods present numerous benefits, including heightened sensitivity and selectivity, affordability, ease of use, portability, and rapid analysis, making them suitable for real-time virus detection. This paper focuses on the construction of electrochemical biosensor, as well as promising biosensor models, and expounds its advantages in virus detection, which is a promising research direction.

The present work focuses on developing miniaturized, light weight electrochemical sensors for detection of chemical warfare agents (CWAs) like sarin and tabun simulants, i.e., diisopropyl fluorophosphate (DFP), and O,S-diethyl methyl phosphonothioate (O,S-DEMPT). Differential pulse voltammetry (DPV) was employed to examine the redox properties of capturing molecular probe CE2 with the nerve agent stimulants. Coupling of a portable potentiostat with the drone technology could allow on-situ and remote detection of analytes such CWAs to be realized, which can be crucially important to the national and global securities.

Breakage and damage of fiber optic cable fibers seriously affect the normal operation of fiber optic networks and it is important to quickly and accurately determine the type and location of faults when they occur. The advantages of wavelet transform in singular signal detection and signal filtering are used to analyze Optical Time Domain Reflectometer (OTDR) curve signal and the fault detection method of fiber communication link with no relay and large span in high altitude area is given, which realizes the accurate detection and location of optical fiber communication link fault events under strong noise. The theoretical analysis is basically consistent with the experimental data. The accuracy of optical fiber fault location has been greatly improved in performance. The method has been directly applied to the field detection of ultra-long optical fiber links in high altitude areas, which has certain significance for the future real-time monitoring of optical fiber cables.

Social media platforms are increasingly enabling the propagation of content from groups related to drug use, thus posing risks for the wider population and, in particular, individuals who are amenable to drug use and drug addiction. The detection of drug use content on social media platforms is a priority for governments, technology companies, and drug law enforcement organizations. To counter this issue, various techniques have been developed to identify and promptly remove drug use content, while also blocking its creators from network access. In this paper, we introduce a manually annotated Twitter dataset, comprising 156,521 tweets published between 2008 and 2022, specifically compiled for the purpose of drug use detection. The dataset underwent annotation by several group of expert annotators who classified the tweets as either drug use or non-drug use. Exploratory data analysis was conducted to comprehend the dataset's characteristics. Various classification algorithms, including SVM, XGBoost, RF, NB, LSTM, and BERT were employed using the dataset. Among the traditional machine learning models, SVM utilizing term frequency-inverse document frequency features achieved the highest F1-Score (0.9017). However, BERT with textual features concatenated with numerical and categorical features in ensemble method surpassed the performance of traditional models, attaining F1-Score of 0.9112. To facilitate future research and enhance English online drug use classification accuracy, the dataset will be made publicly available.

Internet users have significantly increased as a result of the spread of Internet of Things (IoT) technologies and 5G networks. But these developments also make people more susceptible to cybercrime. Intrusion detection systems (IDSs), which protect against cyber threats and facilitate early response, have emerged as crucial security measures to handle this expanding risk. This study intends to present a comprehensive review of IDS, how it interacts with machine learning (ML), and develop a suitable approach for attack detection in 5G and IoT environments. To accomplish this, we leverage the AWID dataset, which is the first wireless traffic dataset specifically designed for security purposes, focusing on the IEEE 802.11 standard and developed to the AWID3 dataset. In this research, we suggest a powerful machine-learning framework for wireless system intrusion detection. We perform evaluations in three stages, covering scenarios for multiple nominal classes, multiple numeric classes, and binary classes. In order to improve the performance of the intrusion detection model, we also use feature selection approaches. Additionally, we offer a model that incorporates the outcomes of three feature selection techniques, highlighting how crucial it is to comprehend the features present in wireless datasets. Our experiments demonstrate how a machine learning-based approach can detect attacks with a high level of accuracy. In particular, the boosted decision tree performs best when overlapping feature selection procedures, whereas the Logistic Regression approach obtains the maximum accuracy of 99% in the first two phases. By providing a comprehensive framework for identifying attacks in 5G and IoT contexts using machine learning approaches, this research makes a contribution to the field of intrusion detection. The results underline how important it is to comprehend wireless dataset characteristics and highlight the possibility of ML-based methods for attaining highly accurate intrusion detection.

This study aims to develop novel automated computer vision algorithms and systems for component replacement inspection for Printed Circuit Boards (PCBs). The proposed algorithms are able to identify locations as well as sizes of different components. They are object detection algorithms based on keypoints of the target components. The algorithms can be implemented as neural networks consisting of two portions: frontend networks and backend networks. The frontend networks are used for the feature extractions of input images. The backend networks are adopted for producing component inspection results. Each component class can has its own frontend and backend networks. In this way, the neural model for the component class can be effectively reused for different PCBs. To reduce the computation time for the inference of the networks, different component classes can share the same frontend networks. A two-stage training process is proposed for effectively exploring features of different components for accurate component inspection. The proposed algorithm has the advantages of the simplicity for training data collection, high accuracy for defect detection, and high reusability and flexibility for online inspection. The algorithm is an effective alternative for the automated inspection in smart factory with growing demand for product quality and diversification.

Since Hydrogen Sulfide (H2S) was recognized as a gas transmitter, its detection and quantifica-tion have become a hot research topic among chemists and biologists. In this area. fluorescent probes have shown great advantages: fast and strong responds, low detection limit and easy ma-nipulation. Here we developed a new fluorescent probe that detected H2S selectively among various bioactive and inorganic salts. This probe was based on the core structure of fluorescein and reacted with H2S through azide-reduction. Great linearity was achieved correlating fluores-cence intensity and H2S concentrations in solution. The detection of H2S in cancer cells was also achieved.

Most petrochemical plants still maintain a Proportional-Integral-Differential controller(PID) system, which is a feedback control system. However, gradually, the PID system is being extended and introduced to the Advanced Process Controller (APC) system, which is an integrated control system of feedforward and feedback that predicts external influences in advance. In the process of conducting on-site plant tests and calculating APC model parameter for the application of APC systems, a problem arises that Model Parameter are implemented differently depending on the proficiency of APC engineers. To minimize this problem, a technique for estimating APC model parameter without a plant test is required. In order to estimate the APC model parameter, it is necessary to train on dynamic interval data. In this paper, we use statistical techniques such as PELT, Linear Kernel, and Radial Basis Function Kernel of Change Point Detection (CPD) to extract dynamic data with minimum Mean Absolute Error (MAE) from time series data of a real petrochemical plant. Then, the hyper parameter is fixed and the APC model parameter is estimated by learning the dynamic section data. By applying the estimated APC model parameter to the APC Model Tool and measuring the fitting rate, it was confirmed that it is possible to estimate the APC model parameter with excellent control performance without plant test.

The IDS serves as a security system that maintains constant surveillance over network traffic and host systems in order to identify any security breaches or potentially concerning activities. Recently. the rise in cyber-attacks has driven the necessity for the development of automated and intelligent network intrusion detection systems. These systems are designed to learn the typical patterns of network traffic, allowing them to identify any deviations from normal behaviour, which can be classified as anomalous or malicious. Machine learning methods are widely used to exhibit a satisfactory effectiveness in detecting malicious payloads in the network traffic. While the volume of the data generated from IDS is increasing exponentially results in the emergence of substantial security risks, it highlighted the imperative to strengthen network security. The performance of traditional machine learning methods depends on the dataset and the data balance distribution in it. while most of IDS datasets suffer from unbalancing, this limits the performance of the machine learning method used in the system and results in missed detections and false alarms in the conventional IDSs. To address this issue, this paper presents a new model-based Generative Adversarial Network (GAN) called TDCGAN to enhance the detection rate of less of minor class in the dataset while maintaining efficiency. The proposed model consists of one generator and three discriminators with an election layer at the end of architecture. The UGR’16 data set is used for evaluation purposes. In order to demonstrate the efficacy of our proposed model, various machine learning algorithms have been utilized for comparison. The experimental findings have determined that TDCGAN presents an efficient resolution for addressing imbalanced intrusion detection and surpasses the performance of other oversampling machine learning methods.

Deep neural network (DNN) watermarking is a potential approach for protecting the intellectual property rights of DNN models. Similar to classical watermarking techniques for multimedia content, the requirements for DNN watermarking include capacity, robustness, and transparency, and other factors. Studies have focused on robustness against retraining and fine-tuning. However, less important neurons in the DNN model may be pruned. Moreover, although the encoding approach in renders DNN watermarking robust against pruning attacks, the watermark is assumed to be embedded only into the fully connected layer in the fine-tuning model. In this study, we extended the method such that the model can be applied to any convolution layer of the DNN model and designed a watermark detector based on a statistical analysis of the extracted weight parameters to evaluate whether the model is watermarked. Using a nonfungible token mitigates the overwriting of the watermark and enables checking when the DNN model with the watermark was created.

In the context of Shared Autonomous Vehicles, the need to monitor the environment inside the car will be crucial. This article focuses on the application of deep learning algorithms to detect objects, namely lost/forgotten items to inform the passengers, and aggressive items to monitoring if violent actions may arise between passengers. For object detection algorithms was used public datasets (COCO and TAO) to train state-of-the-art algorithms, such as YOLOv5. For violent action detection was used the MoLa InCar dataset to train on state-of-the-art algorithms such as I3D, R(2+1)D, SlowFast, TSN and TSM. At the end an embedded automotive solution was used to demonstrate both methods running in real-time.

The substrate N1, N3, N5 -tris(2-hydroxyphenyl)benzene-1,3,5-tricarboxamide (Sensor A) was prepared in the reaction of 1,3,5-benzenetricarboxylic acid (trimesic acid) and o-aminophenol in ethanol. The prepared organic sensor fulfills the chemiluminescent requirements including luminophore, spacer, and suitable binding receptor that distress the probe's luminescent features, providing selective and sensitive detection of mercury and iron ions in aqueous solutions. The sensor selectively detects mercury and iron ions in a water matrix containing various metal ions including sodium, calcium, magnesium, zinc, and nickel. Strong and immediate binding was observed between mercury ions and the substrate at pH 7.0 with a binding affinity toward Hg (II) enhanced by nine folds higher than that observed for iron sensor binding affinity, which makes the substrate a distinctive luminescence sensor for mercury detection at ambient conditions. The sensor shows a linear response toward Hg (II) in the concentration range from 4.2 x 10-5 to 2.0 x 10-8 M with a limit of detection of 1.0 x 10-8 M. Further, Sensor A provides linear detection for iron ions in the range from 1.5 x 10-3 to 1.5 x 10-8 M. The measured adsorption capacity of Sensor A toward mercury ions ranged from 1.25 to 1.97 mg/g and the removal efficiency from water samples reached 98.8% at pH 7.0. The data demonstrate that Sensor A is an excellent probe for detecting and removing mercury ions from water bodies.

The Median American Sign Language Interpretation Software (ASL) Interpretation Software is a web application that is capable of interpreting American Sign Language in real-time, utilizing an internet connection and a primary web camera, complete with basic phrases and letters. Extensive use of Deep Learning and Neural Networks, specifically Convoluted Neural Networks, enables Median to interpret video inputs and generate accurate results directly displayed to the user in text format. The ultimate goal for Median is to have it act as a bridge between hearing people and members of the deaf community, allowing deaf people to communicate with non-signing people using American Sign Language. Furthermore, Median has been designed to benefit people who lack access to a human ASL Translator, as its format as a website allows it to be accessible anywhere at any time, giving increased availability over human interpreters. Median is designed to be a very versatile program with great potential for growth and expansion.

There is great interest in automatically detecting road weather and understanding its impacts on the overall safety of the transport network. This can, for example, support road condition-based maintenance or even serve as detection systems that assist safe driving during adverse climate conditions. In computer vision, previous work has demonstrated the effectiveness of deep learning in predicting weather conditions from outdoor images. However, training deep learning models to accurately predict weather conditions using real-world road-facing images is difficult due to: (1) the simultaneous occurrence of multiple weather conditions; (2) imbalanced occurrence of weather conditions throughout the year; and (3) road idiosyncrasies, such as road layouts, illumination, road objects etc. In this paper, we explore the use of focal loss function to force the learning process to focus on weather instances that are hard to learn with the objective to help address data imbalance. In addition, we explore the attention mechanism for pixel based dynamic weight adjustment to handle road idiosyncrasies using state-of-the-art vision transformer models. Experiments with a novel multi-label road weather dataset show that focal loss significantly increases the accuracy of computer vision approaches for imbalanced weather conditions. Furthermore, vision transformers outperforms current state-of-the-art convolutional neural networks in predicting weather conditions with a validation accuracy of 92% and F1-score of 81.22%, which is impressive considering the imbalanced nature of the dataset.

As machine learning and computer vision techniques and methods continue to advance, the collection of naturalistic traffic data from video feeds is becoming more and more feasible. That is especially true for the case of bicycles, for which the collection of naturalistic data is not achievable in the traditional vehicle approach. This study describes a research effort that aims to extract naturalistic cycling data from a video dataset for use in safety and mobility applications. The used videos come from a dataset collected in a previous Virginia Tech Transportation Institute study in collaboration with SPIN in which continuous video data at a non-signalized intersection on the Virginia Tech campus was recorded. The research team applied computer vision and machine learning techniques to develop a comprehensive framework for the extraction of naturalistic cycling trajectories. In total, this study resulted in the collection and classification of 619 bicycle trajectories based on their type of interactions with other road users. The results confirm the success of the proposed methodology in relation to extracting the locations, speeds, and accelerations of the bicycles at a high level of precision. Furthermore, preliminary insights into the acceleration and speed behavior of bicyclists around motorists are determined.

Fog, haze, or smoke are usual atmospheric phenomena that dramatically compromise the overall visibility of any scene, critically affecting features such as illumination, contrast, and contour detection of objects. The decrease in visibility compromises the performance of computer vision algorithms such as pattern recognition and segmentation, some of them very relevant for decision-making for the security or autonomous vehicle industries. Several dehazing methods have been proposed, however, to the best of our knowledge, all proposed metrics compare the defogged image to its ground truth for evaluation of the defogging algorithms, or need to estimate parameters through physical models. This fact hinders progress in the field as obtaining proper ground truth images is costly and time-consuming, and physical parameters greatly depend on the scene conditions. This paper aims to tackle this issue by proposing a contour-based metric for image defogging evaluation that does not need a ground truth image. The proposed metric only requires the original hazy RGB image and the RGB image after the defogging procedure. A comparison of the proposed metric with metrics currently used in the NTIRE 2018 defogging challenge is performed to prove its effectiveness in a general situation, showing comparable results to conventional metrics.

According to the risk investigations of being involved in an accident, alcohol-impaired driving is one of the major causes of motor-vehicles accidents. Preventing highly intoxicated persons from driving would potentially save many lives. This paper proposes a lightweight in-vehicle alcohol detection that processes the data generated from 6-alcohol sensors (MQ-3 Alcohol Sensors) using an optimizable shallow neural network (O-SNN). The experimental evaluation results exhibit a high-performance detection system scoring a 99.8% of detection accuracy with a very short inferencing delay of 2.22 µ seconds. Hence, the proposed model can be efficiently deployed and used to discover in-vehicle alcohol with high accuracy and low inference overhead as a part of the driver alcohol detection system for safety (DADSS) system aiming at massive deployment of alcohol sensing systems that could potentially save thousands of lives annually.

Intrusion Detection Systems (IDS) plays a part in modern cyber security, as a result of the increasing need for cyber security systems in the “real” world due to the increasing number of cyber attacks, more sophisticated systems are required in order to prevent these attacks - an IDS can provide this protection. Due to the sophistication of these systems, they must be properly understood, developed and analyzed - research papers can be used as a tool to improve IDS systems. This paper is composed of two main sections: a survey and a taxonomy, providing information, reviews and interpretations from relevant papers, a timeline of important papers, a discussion on the future of IDS and a classification on IDS and how to apply this.

An electrocardiograph (ECG) reflects the health of the human heart and is used to help diagnose arrhythmia and myocardial infarction(MI) in clinical practice. Early diagnosis of arrhythmia helps implement preventive measures and plays a crucial role in saving a patient's life. With the increasing demand of clinicians for ECG analysis technology, intelligent detection and diagnosis of ECG signals has become a more efficient means to assist physicians in diagnosing cardiovascular diseases. This paper introduces an ECG diagnosis approach based on an ensemble deep learning combination of CNN(convolutional neural network) and SLAP(stacked-long short term memory architecture for prediction) architecture. ECG data is denoised and further divided into single heartbeats to achieve data standardization and sample diversity. Adam optimizer and BCEwithlogitsloss multi-classification loss function were used to enhance the model effect, and the system achieved the classification effect of 99.3% average accuracy, 99.0% F1-value, and 99.2% sensitivity in MIT-BIH standard database classification. It also shows good generalization ability on the Tianchi data set.

Coronavirus Disease-19 (COVID-19) is presently wreaking havoc on public health and socio-economic development. Besides the upper and lower respiratory tract involvement, gastrointestinal symptoms are also reported in COVID-19 patients through gut-lung axis. Finding its way through the feces of infected individuals and other sources, the genetic material of SARS-CoV-2 (ssRNA) is reported widely in wastewater and is being used as a fingerprint for its detection. With millions of cases arriving every day, there is a need to level up the testing speed efficiency. Due to the restricted sampling potential of testing laboratories, clinical testing is unable to track all the symptomatic and asymptomatic cases. Wastewater-based epidemiology (WBE) bestows an auxiliary monitoring tool that will contribute in community level screening. Sample collection, concentration, RNA extraction, quantification and data analysis are the main steps involved in implementation of WBE that can be relied upon as an alarm call for an upcoming wave, emergence of a new variant or any future pandemic. WBE can be a cheaper and more practical alternative to high end and sophisticated clinical testing for community transmission detection. Worldwide, there are more than 300 reports entailing the occurrence of SARS-CoV-2 in wastewater exhibiting unique temporal trends with five of them in India. This review aims to address the present knowledge on surveillance of SARS-CoV-2 in wastewater and its implications.

One of the critical tools for early detection and subsequent evaluation of the incidence of lung diseases is chest radiography. This study presents a real-world implementation of a convolutional neural network (CNN) based Carebot Covid app to detect COVID-19 from chest X-ray (CXR) images. Our proposed model takes the form of a simple and intuitive application. Used CNN can be deployed as a STOW-RS prediction endpoint for direct implementation into DICOM viewers. The results of this study show that the deep learning model based on DenseNet and ResNet architecture can detect SARS-CoV-2 from CXR images with precision of 0.981, recall of 0.962 and AP of 0.993.

The accurate prediction of heat load profiles with a daily resolution is required for a broad range of applications such as potential studies, design, or predictive operation of heating systems. If the heat demand of a consumer is mainly caused by (production) processes independent of the ambient temperature, existing load profile prediction methods fail. To close this gap, this study develops two ex post machine learning models for the prediction of the heat demand with a daily resolution. The selected input features are commonly available to each consumer connected to public natural gas and electricity grids or operating an energy monitoring system: Ambient temperature, weekday, electricity consumption, and heat consumption of the last seven days directly before the predicted day. The study’s database covers electricity and natural gas consumption load profiles from 82 German consumers over a period of two years. Electricity and heat consumption correlate strongly with individual patterns for many consumers. Both, shallow and deep learning algorithms are evaluated. The highest accuracy is achieved by a Long Short Term Memory (LSTM) model with a median of R² of 0.94. The ex post model architecture makes the model suitable for automated anomaly detection in energy monitoring systems.

Tobamovirus species represent a threat to solanaceous crops worldwide, due to their extreme stability and being seed-borne. In particular, recent outbreaks of tomato brown rugose fruit virus in tomato and pepper crops led to the establishment of prompt control measures, and the need for reliable diagnosis was urged. Another member of the genus, tomato mottle mosaic virus, has recently risen attention due to reports in different continents and its common features with tomato brown rugose fruit virus. In this study, a new real-time RT-PCR detection system was developed for tomato brown rugose fruit virus and tomato mottle mosaic virus on tomato leaves and seeds using TaqMan chemistry. This test was designed to detect tomato mottle mosaic virus by amplifying the movement protein gene in a duplex assay with tomato brown rugose fruit virus target on the CP-3’NTR region, which was already validated as a single assay. The performance of this tests was evaluated, displaying analytical sensitivity 10-5-10-6-fold dilution for seeds and leaves, respectively, and good analytical specificity, repeatability, and reproducibility. Using the newly developed and validated test, tomato brown rugose fruit virus detection was 100% concordant with previously performed analyses on 106 official samples collected in 2021 from different continents.

Deep learning techniques are increasingly being recognized as effective image classifiers. Aside from their successful performance in past studies, the accuracies have varied in complex environments in comparison with the popularly applied machine learning classifiers. This study seeks to explore the feasibility for using a U-Net deep learning architecture to classify bi-temporal high resolution county scale aerial images to determine the spatial extent and changes of land cover classes that directly or indirectly impact tidal marsh. The image set used in the analysis is a collection of a 1-m resolution collection of National Agriculture Imagery Program (NAIP) tiles from 2009 and 2019 covering Beaufort County, South Carolina. The U-net CNN classification results were compared with two machine learning classifiers, the Random Trees (RT) and the Support Vector Machine (SVM). The results revealed a significant accuracy advantage in using the U-Net classifier (92.4%) as opposed to the SVM (81.6%) and RT (75.7%) classifiers for overall accuracy. From the perspective of a GIS analyst or coastal manager, the U-Net classifier is now an easily accessible nad powerful tool for mapping large areas. Change detection analysis indicated little areal change on marsh extent, though increased land development throughout the county has the potential to negatively impact the health of the marshes. Future work should explore applying the constructed U-Net classifier to coastal environments in large geographic areas, while also implementing other data sources (e.g., LIDAR, multispectral data) to enhance classification accuracy.

African swine fever (ASF) has evolved from an exotic animal disease to a threat to global pig production. An important avenue for wide-spread transmission of animal diseases is the dissemination of viruses through boar semen used for artificial insemination (AI). In this context, we investigated the role of male reproductive organs in ASF. Mature domestic boars and adolescent wild boar inoculated with different ASF virus strains were investigated by means of virological and pathological methods. Additionally, electron microscopy was employed to investigate in vitro inoculated sperm. Viral genome, antigen and infectious virus could be found in all gonadal tissues and accessory sex glands. The viral antigen and viral mRNAs were mainly found in mononuclear cells of the respective tissues. However, some other cell types, including Leydig, endothelial and stromal cells were also found positive. Using RNAScope, p72 mRNA could be found in scattered halo cells of the epididymal duct epithelium which could point to disruption of the barrier. No direct infection of spermatozoa was observed by immunohistochemistry or electron microscopy. Taken together, our results strengthen the assumption that ASFV can be transmitted via boar semen. Future studies are needed to explore excretion dynamics and transmission efficiency.

The goal of background reconstruction is to recover the background image of a scene from a sequence of frames showing this scene cluttered by various moving objects. This task is fundamental in image analysis, and is generally the first step before more advanced processing, but difficult because there is no formal definition of what should be considered as background or foreground and the results may be severely impacted by various challenges such as illumination changes, intermittent object motions, highly cluttered scenes, etc. We propose in this paper a new iterative algorithm for background reconstruction, where the current estimate of the background is used to guess which image pixels are background pixels and a new background estimation is performed using those pixels only. We then show that the proposed algorithm, which uses stochastic gradient descent for improved regularization, is more accurate than the state of the art on the challenging SBMnet dataset, especially for short videos with low frame rates, and is also fast, reaching an average of 52 fps on this dataset when parameterized for maximal accuracy using GPU acceleration and a Python implementation.

In this paper we formally define the hierarchical clustering network problem (HCNP) as the problem to find a good hierarchical partition of a network. This new problem focuses on the dynamic process of the clustering rather than on the final picture of the clustering process. To address it, we introduce a new hierarchical clustering algorithm in networks, based on a new shortest path betweenness measure. To calculate it, the communication between each pair of nodes is weighed by the importance of the nodes that establish this communication. The weights or importance associated to each pair of nodes are calculated as the Shapley value of a game, named as the linear modularity game. This new measure, (the node-game shortest path betweenness measure), is used to obtain a hierarchical partition of the network by eliminating the link with the highest value. To evaluate the performance of our algorithm, we introduce several criteria that allow us to compare different dendrograms of a network from two point of view: modularity and homogeneity. Finally, we propose a faster algorithm based on a simplification of the node-game shortest path betweenness measure, whose order is quadratic on sparse networks. This fast version is competitive from a computational point of view with other hierarchical fast algorithms, and, in general, it provides better results.

Performing predictive maintenance (PdM) is challenging for many reasons. Dealing with large datasets which may not contain run-to-failure data (R2F) complicates PdM even more. When no R2F data are available, identifying condition indicators (CIs), estimating the health index (HI), and thereafter, calculating a degradation model for predicting the remaining useful lifetime (RUL) are merely impossible using supervised learning. In this paper, a 3 dof delta robot used for pick and place task is studied. In the proposed method, autoencoders (AEs) are used to predict when maintenance is required based on the signal sequence distribution and anomaly detection, which is vital when no R2F data is available. Due to the sequential nature of the data, non-linearity of the system, and correlations between parameter time series, convolutional layers are used for feature extraction. Thereafter, a sigmoid function is used to predict the probability of having an anomaly given CIs acquired from AEs. This function can be manually tuned given the sensitivity of the system or optimized by solving a minimax problem. Moreover, the proposed architecture can be used for fault localization for the specified system. Additionally, the proposed method is capable of calculating RUL using Gaussian process (GP), as a degradation model, given HI values as its input.

Animal welfare is not only an ethically important consideration in good animal husbandry, but can also have a significant effect on an animal’s productivity. The aim of this paper is to show that a reduction in animal welfare, in the form of increased stress, can be identified in pigs from frontal images of the animals. We train a Convolutional Neural Network (CNN) using a leave-one-out design and show that it is able to discriminate between stressed and unstressed pigs with an accuracy of >90% in unseen animals. Grad-CAM is used to identify the animal regions used, and these support those used in manual assessments such as the Pig Grimace Scale. This innovative work paves the way for further work examining both positive and negative welfare states with a view to the development of an automated system that can be used in precision livestock farming to improve animal welfare.

The goal of this study was to analyze the forest degradation in the Reserve for San Rafael National Park, Paraguay, during the period 2005-2019. This Reserve is one of the most important forest remnants of the Upper Paraná Atlantic Forest Ecoregion. A multitemporal analysis of degradation was carried out due to the occurrence of three disturbances: forest fires, a twister and illicit crops, using the Continuous Degradation Detection (CODED) algorithm, for which 3 factors were considered: variations due to pixel in the NDFI index values before, during and after every disturbance registered. In this context, the phenomenon with the greatest impact in terms of magnitude of degradation were the forest fires of 2005, being that year at the same time, the one that reported the highest degradation values. Secondly, there are the illicit crops established until the first semester of 2019, and lastly, the twister that occurred in 2017. Our findings demonstrate that CODED algorithm can detect multi-temporal degradation events in a Subtropical Broadleaf Forest, and the post-disturbance regeneration process after every disturbance tends to occur immediately. The response in terms of degradation-regeneration is highly variable, depending of the nature and severity of each disturbance and the vegetation recovery dynamics.

An evaluation of image contrast in a controlled foggy environment has been made by comparison between intensity imaging and different modes of polarimetric imaging. A small-scale fog chamber has been designed and constructed to create the necessary controlled foggy environment. A linear polarimetric camera of division of focal plane and a linearly polarized light source has been used for performing the experiments with polarized light. In order to evaluate the image contrast of the different imaging modes, the Michelson’s contrast of samples of different materials relative to their background has been calculated. The higher the image contrast, the easier is to detect and segment the targets of interest that are surrounded by fog. It has been proved quantitatively that in the studied situations polarimetric images present an improvement in contrast when compared to conventional intensity images.

Natural circulation loop (NCL) systems are buoyancy-driven heat exchangers that are used in various industrial applications. The concept of passive heat exchange in NCL systems is attractive, because there is no need for an externally driven equipment (e.g., a pump) to maintain the fluid circulation. However, relying on buoyancy as the sole driving force may lead to several potential difficulties, one of which is generation of (possibly) time-varying nonlinearities in the dynamical system, where a difference in the time scales of heat transfer and fluid flow causes the flow to change from a steady-state regime to either an oscillatory regime or a flow-reversal regime, both of which are undesirable. In this paper, tools of symbolic time series analysis (e.g., probabilistic finite state automata (PFSA)) are proposed to identify selected regimes of operation in NCL systems, where the underlying principle is built upon the concept of pattern classification from measurements of fluid-flow dynamics. The proposed method is shown to be capable of identifying the current regime of operation from the initial time response under a given set of operational parameters. The efficacy of regime classification is demonstrated by testing on two data sets, generated from numerical simulation of a MATLAB SimuLink model that has previously been validated with experimental data. The results of the proposed PFSA-based classification are compared with those of a hidden Markov model (HMM) that serves as the baseline.

This paper provides a concise review of remote sensing of ocean fronts and its applications in marine ecology and fisheries, with a particular focus on the most popular front detection algorithms/techniques: Canny (1986), Cayula and Cornillon (1990, 1992, 1995), Miller (2004, 2009), Shimada et al. (2005), Belkin and O’Reilly (2009), and Nieto et al. (2012). A case is made for feature-based approach in marine ecology and fisheries that emphasizes fronts as major structural and circulation features of the ocean realm that play key roles in various aspects of marine ecology.

Pipeline integrity is an important area of concern for the oil and gas, refining, chemical, hydrogen, carbon sequestration, and electric-power industries, due to the safety risks associated with pipeline failures. Regular monitoring, inspection, and maintenance of these facilities is therefore required for safe operation. Large standoff magnetometry (LSM) is a non-intrusive, passive magnetometer-based mea- surement technology that has shown promise in detecting defects (anomalies) in regions of elevated mechanical stresses. However, analyzing the noisy multi-sensor LSM data to clearly identify regions of anomalies is a significant challenge. This is mainly due to the high frequency of the data collection, mis-alignment between consecutive inspections and sensors, as well as the number of sensor measurements recorded. In this paper we present LSM defect identification approach based on ma- chine learning (ML). We show that this ML approach is able to successfully detect anomalous readings using a series of methods with increasing model complexity and capacity. The methods start from unsupervised learning with "point" methods and eventually increase complexity to supervised learning with sequence methods and multi-output predictions. We observe data leakage issues for some methods with randomized train/test splitting and resolve them by specific non-randomized splitting of training and validation data. We also achieve a 200x acceleration of support-vector classifier (SVC) method by porting computations from CPU to GPU leveraging the cuML RAPIDS AI library. For sequence methods, we develop a customized Convolutional Neural Network (CNN) architecture based on 1D convolutional filters to identify and characterize multiple properties of these defects. In the end, we report the scalability of the best-performing methods and compare them, for viability in field trials.

For the Remotely Piloted Aircraft Systems (RPAS) market to continue its current growth rate, cost-effective "Detect and Avoid" systems that enable safe beyond visual line of sight (BVLOS) operations are critical. We propose an audio-based "Detect and Avoid" system, composed of microphones and an embedded computer, which performs real-time inferences using a sound event detection (SED) deep learning model. Two state-of-the-art SED models, YAMNet and VGGish, are fine-tuned using our dataset of aircraft sounds and their performances are compared for a wide range of configurations. YAMNet, whose MobileNet architecture is designed for embedded applications, outperformed VGGish both in terms of aircraft detection and computational performance. YAMNet's optimal configuration, with > 70% true positive rate and precision, results from combining data augmentation and undersampling with the highest available inference frequency (i.e. 10 Hz). While our proposed "Detect and Avoid" system already allows the detection of small aircraft from sound in real time, additional testing using multiple aircraft types is required. Finally, a larger training dataset, sensor fusion, or remote computations on cloud-based services could further improve system performance.

The COVID-19 pandemic has wreaked havoc on the whole world, taking over half a million lives and capsizing the world economy in unprecedented magnitudes. With the world scampering for a vaccine, early detection and containment is the only redress. Existing diagnostic technologies with high accuracy like RT-PCRs are expensive and sophisticated, requiring skilled individuals for specimen collection and screening, resulting in lower outreach. So, methods excluding direct human intervention are much sought after, and artificial intelligence-driven automated diagnosis, especially with radiography images, captured the researchers' interest. This survey marks a detailed inspection of the deep-learning-based automated detection of COVID-19 works done to date, a comparison of the available datasets, methodical challenges like imbalanced datasets, and others, along with probable solutions with different pre-processing methods, and scopes of future exploration in this arena. We also benchmarked the performance of 315 deep models in diagnosing COVID-19, Normal, and Pneumonia from x-ray images of a custom dataset created from four others. The dataset is publicly available at https://github.com/rgbnihal2/COVID-19-X-ray-Dataset. Our results show that DenseNet201 model with Quadratic SVM classifier performs the best (accuracy: 98.16%, sensitivity: 98.93%, specificity: 98.77%) and maintains high accuracies in other similar architectures as well. This proves that even though radiography images might not be conclusive for radiologists, but it is so for deep learning algorithms for detecting COVID-19. We hope this extensive review will provide a comprehensive guideline for researchers in this field.

There is a major clinical need for accurate biomarkers for prostate cancer prognosis, to better inform treatment strategies and disease monitoring. Current clinically recognised prognostic factors, including prostate-specific antigen (PSA) levels, lack sensitivity and specificity in distinguishing aggressive from indolent disease, particularly in patients with localised intermediate grade prostate cancer. There has therefore been a major focus on identifying molecular biomarkers that can add prognostic value to existing markers, including investigation of DNA methylation, which has a known role in tumorigenesis. In this review, we will provide a comprehensive overview of the current state of DNA methylation biomarker studies in prostate cancer prognosis, and highlight the advances that have been made in this field. We cover the numerous studies into well-established candidate genes, and explore the technological transition that has enabled hypothesis-free genome-wide studies and the subsequent discovery of novel prognostic genes.

Accurate and timely testing has become an essential measure in combatting the COVID-19 global pandemic. Currently, polymerase chain reaction (PCR) based assays are the most relied on methods for SARS-CoV-2 detection. This traditional workflow involves a viral RNA extraction from the viral transport media storing nasopharyngeal swabs collected from patients, followed by PCR based detection. While accurate, this methodology is time consuming and resource heavy, causing for delays in receiving results or limited access to testing. Herein, we demonstrate a validated method for SARS-CoV-2 detection from viral transport media using a two-step, direct-to-PCR workflow revolving around shaker-mill homogenization. This method completely bypasses the extraction steps of the traditional workflow, replacing it with 30 seconds of mechanical disruption sufficient to allow for COVID-19 detection with a 96.43% sensitivity and 100% specificity when compared to traditional extraction to PCR based methods.

An autonomous concrete crack inspection system is necessary for preventing hazardous incidents arising from deteriorated concrete surfaces. In this paper, we represent a concrete crack detection framework to aid the process of automated inspection. The proposed approach employs a deep convolutional neural network architecture for crack segmentation from concrete image. The proposed network alleviates the effect of gradient vanishing problem present in deep neural network architectures. A feature silencing module is incorporated in the crack detection framework, for eliminating unnecessary feature maps from the network. The overall performance of the network significantly improves as a result. Experimental results support the benefit of incorporating feature silencing within a convolutional neural network architecture for improving the network’s robustness, sensitivity, and specificity. An added benefit of the proposed architecture is its ability to accommodate for the trade-off between specificity (positive class detection accuracy) and sensitivity (negative class detection accuracy) with respect to the target application. Furthermore, the proposed framework achieves a high precision rate and processing time than crack detection architectures present in literature.

An electrochemical sensing platinum nanoparticle in the tantalum electrode is provided by means of an Ion Beam Sputtering Deposition (IBSD). The electrode was made with a Pt solution, sputtered simultaneously with hydrochloric acid corrosion on tantalum substrate. In the study of heavy metal ions, for example, the platinum nanoparticle electrodes as prepared were used Square wavelength voltammetry (OSWV) Hg²⁺, Cu²⁺ and Ag²⁺. The porous electrodes were observed in a broader range by the Pt nanostructure electrode for heavy metal ions. Furthermore, the susceptibility to detection has been shown to be saturated as the thickness of the layer electrode exceeded 50 nm. For Hg²⁺ 0,003-1 M, for Cu²⁺ 0,005-3 M and for Ag²⁺ the linear detection scale is 0,009-4 M. There has also been good reusability and repeatability. In addition, a scan electron microscope (SEM) used to study platinum electrode forming process and nanostructure. This electrode will have interesting applications in sensing systems.

Today, contamination from heavy metals in the atmosphere is a global concern. Efficient detection techniques are therefore necessary if heavy metal exposure levels in different media are to be determined. The voltammetry method for in situ detection of heavy metal ions is a very sensitive electrochemical method. This thesis explores emerging developments in electrode alteration, materials production and experimental optimization. An electrochemical sensing platinum nanoparticle in the tantalum electrode is provided by means of an Ion Beam Sputtering Deposition (IBSD). The electrode was made with a Pt solution, sputtered simultaneously with hydrochloric acid corrosion on tantalum substrate. In the study of heavy metal ions, for example, the platinum nanoparticle electrodes as prepared were used Square wavelength voltammetry (OSWV) Hg²⁺, Cu²⁺ and Ag²⁺. The porous electrodes were observed in a broader range by the Pt nanostructure electrode for heavy metal ions. Furthermore, the susceptibility to detection has been shown to be saturated as the thickness of the layer electrode exceeded 50 nm. For Hg²⁺ 0,003-1 M, for Cu²⁺ 0,005-3 M and for Ag²⁺ the linear detection scale is 0,009-4 M. There has also been good reusability and repeatability. In addition, a scan electron microscope (SEM) used to study platinum electrode forming process and nanostructure. This electrode will have interesting applications in sensing systems.

Accurate and efficient traffic incident detection methods can effectively alleviate traffic congestion caused by traffic incidents, prevent secondary accidents and improve the safety of urban road traffic.Aiming at the problems that the traditional machine learning event detection method cannot fully extract the parameter characteristics of traffic flow and is not suitable formulti-dimensional and non-linear massive data, we propose a new traffic event detection method(CNN-XGBoost).This method combines the respective advantages of Convolution Neural Network(CNN) and Extreme Gradation Boosting (XGBoost). Firstly, we preprocessed the original freeway traffic incident detection data set by constructing initial variable set, data normalization, data balance processing and dimension reorganization. Secondly,we use CNN network to automatically extract the deep features of event detection data, and use XGBoost as a classifier to classify the extracted features for expressway traffic event detection.Finally, we use the data set of Hangzhou expressway microwave detector in China to carry out simulation experiments on CNN-XGBoost. The experimental results show that compared with XGBoost, CNN, Support Vector Machine (SVM) and Gradient Boosting Decision Tree (GBDT) and other methods, CNN-XGBoost method can effectively improve the accuracy of expressway traffic event detection and has better generalization ability.

Based on detection of elliptic particle tracks, $\simeq 137^2 n^2$ bigger than Bohr-Sommerfeld electron orbits, indicating the possible detection of superluminal electrons masquerading as magnetic monopoles, a new structure emerges leading to: (i) a new set of seven elementary lengths; (ii) replacement of the usual motion (Lorentz) transformations by scale transformations between $v^2<c^2$ and $v^2>c^2$ frames; (iii) equivalence of charge between $v^2<c^2$ and $v^2>c^2$ frames based on the Dirac-Schwinger quantization condition; (iv) a relativistic foundation for the Dirac-Schwinger quantization condition; (v) a possible cause of charge quantization; and (vi) the prospect of symmetry in Maxwell's equations. If the elliptic particle tracks are viewed as a magnification of electron orbits, the effect is suggestive of a spacetime distortion such as those predicted in general relativistic theories.